ath79 board support

Use full OpenWrt patch for it, as it works better on 4.1.13
kernel. Deduplicate the patches for atheros devices.

1 files changed, 47200 insertions, 0 deletions

diff --git a/target/mips/ath79/patches/4.1.13/0001-openwrt-ath79.patch b/target/mips/ath79/patches/4.1.13/0001-openwrt-ath79.patch
new file mode 100644
index 000000000..4178f20cb
--- /dev/null
+++ b/target/mips/ath79/patches/4.1.13/0001-openwrt-ath79.patch
@@ -0,0 +1,47200 @@
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/clock.c linux-4.1.13/arch/mips/ath79/clock.c
+--- linux-4.1.13.orig/arch/mips/ath79/clock.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/clock.c	2015-12-04 19:57:05.422010155 +0100
+@@ -25,7 +25,7 @@
+ #include "common.h"
+ 
+ #define AR71XX_BASE_FREQ	40000000
+-#define AR724X_BASE_FREQ	5000000
++#define AR724X_BASE_FREQ	40000000
+ #define AR913X_BASE_FREQ	5000000
+ 
+ struct clk {
+@@ -99,8 +99,8 @@
+ 	div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK);
+ 	freq = div * ref_rate;
+ 
+-	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK);
+-	freq *= div;
++	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK) * 2;
++	freq /= div;
+ 
+ 	cpu_rate = freq;
+ 
+@@ -350,6 +350,91 @@
+ 	iounmap(dpll_base);
+ }
+ 
++static void __init qca953x_clocks_init(void)
++{
++	unsigned long ref_rate;
++	unsigned long cpu_rate;
++	unsigned long ddr_rate;
++	unsigned long ahb_rate;
++	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
++	u32 cpu_pll, ddr_pll;
++	u32 bootstrap;
++
++	bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++	if (bootstrap &	QCA953X_BOOTSTRAP_REF_CLK_40)
++		ref_rate = 40 * 1000 * 1000;
++	else
++		ref_rate = 25 * 1000 * 1000;
++
++	pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
++	out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++		  QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
++	ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++		  QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
++	nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
++	       QCA953X_PLL_CPU_CONFIG_NINT_MASK;
++	frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
++	       QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
++
++	cpu_pll = nint * ref_rate / ref_div;
++	cpu_pll += frac * (ref_rate >> 6) / ref_div;
++	cpu_pll /= (1 << out_div);
++
++	pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
++	out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++		  QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
++	ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++		  QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
++	nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
++	       QCA953X_PLL_DDR_CONFIG_NINT_MASK;
++	frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
++	       QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
++
++	ddr_pll = nint * ref_rate / ref_div;
++	ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
++	ddr_pll /= (1 << out_div);
++
++	clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
++
++	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++		  QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
++		cpu_rate = ref_rate;
++	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
++		cpu_rate = cpu_pll / (postdiv + 1);
++	else
++		cpu_rate = ddr_pll / (postdiv + 1);
++
++	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++		  QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
++		ddr_rate = ref_rate;
++	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
++		ddr_rate = ddr_pll / (postdiv + 1);
++	else
++		ddr_rate = cpu_pll / (postdiv + 1);
++
++	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++		  QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
++		ahb_rate = ref_rate;
++	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++		ahb_rate = ddr_pll / (postdiv + 1);
++	else
++		ahb_rate = cpu_pll / (postdiv + 1);
++
++	ath79_add_sys_clkdev("ref", ref_rate);
++	ath79_add_sys_clkdev("cpu", cpu_rate);
++	ath79_add_sys_clkdev("ddr", ddr_rate);
++	ath79_add_sys_clkdev("ahb", ahb_rate);
++
++	clk_add_alias("wdt", NULL, "ref", NULL);
++	clk_add_alias("uart", NULL, "ref", NULL);
++}
++
+ static void __init qca955x_clocks_init(void)
+ {
+ 	unsigned long ref_rate;
+@@ -435,6 +520,100 @@
+ 	clk_add_alias("uart", NULL, "ref", NULL);
+ }
+ 
++static void __init qca956x_clocks_init(void)
++{
++	unsigned long ref_rate;
++	unsigned long cpu_rate;
++	unsigned long ddr_rate;
++	unsigned long ahb_rate;
++	u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv;
++	u32 cpu_pll, ddr_pll;
++	u32 bootstrap;
++
++	bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
++	if (bootstrap &	QCA956X_BOOTSTRAP_REF_CLK_40)
++		ref_rate = 40 * 1000 * 1000;
++	else
++		ref_rate = 25 * 1000 * 1000;
++
++	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
++	out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++		  QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
++	ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++		  QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
++
++	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
++	nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
++	       QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
++	hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
++	       QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK;
++	lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) &
++	       QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK;
++
++	cpu_pll = nint * ref_rate / ref_div;
++	cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
++	cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
++	cpu_pll /= (1 << out_div);
++
++	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
++	out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++		  QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
++	ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++		  QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
++	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
++	nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
++	       QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
++	hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
++	       QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK;
++	lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) &
++	       QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK;
++
++	ddr_pll = nint * ref_rate / ref_div;
++	ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
++	ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
++	ddr_pll /= (1 << out_div);
++
++	clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
++
++	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++		  QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
++		cpu_rate = ref_rate;
++	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL)
++		cpu_rate = ddr_pll / (postdiv + 1);
++	else
++		cpu_rate = cpu_pll / (postdiv + 1);
++
++	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++		  QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
++		ddr_rate = ref_rate;
++	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL)
++		ddr_rate = cpu_pll / (postdiv + 1);
++	else
++		ddr_rate = ddr_pll / (postdiv + 1);
++
++	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++		  QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
++
++	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
++		ahb_rate = ref_rate;
++	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++		ahb_rate = ddr_pll / (postdiv + 1);
++	else
++		ahb_rate = cpu_pll / (postdiv + 1);
++
++	ath79_add_sys_clkdev("ref", ref_rate);
++	ath79_add_sys_clkdev("cpu", cpu_rate);
++	ath79_add_sys_clkdev("ddr", ddr_rate);
++	ath79_add_sys_clkdev("ahb", ahb_rate);
++
++	clk_add_alias("wdt", NULL, "ref", NULL);
++	clk_add_alias("uart", NULL, "ref", NULL);
++}
++
+ void __init ath79_clocks_init(void)
+ {
+ 	if (soc_is_ar71xx())
+@@ -447,8 +626,12 @@
+ 		ar933x_clocks_init();
+ 	else if (soc_is_ar934x())
+ 		ar934x_clocks_init();
++	else if (soc_is_qca953x())
++		qca953x_clocks_init();
+ 	else if (soc_is_qca955x())
+ 		qca955x_clocks_init();
++	else if (soc_is_qca956x())
++		qca956x_clocks_init();
+ 	else
+ 		BUG();
+ }
+@@ -488,3 +671,15 @@
+ 	return clk->rate;
+ }
+ EXPORT_SYMBOL(clk_get_rate);
++
++int clk_set_rate(struct clk *clk, unsigned long rate)
++{
++	return 0;
++}
++EXPORT_SYMBOL_GPL(clk_set_rate);
++
++long clk_round_rate(struct clk *clk, unsigned long rate)
++{
++	return 0;
++}
++EXPORT_SYMBOL_GPL(clk_round_rate);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/common.c linux-4.1.13/arch/mips/ath79/common.c
+--- linux-4.1.13.orig/arch/mips/ath79/common.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/common.c	2015-12-04 19:57:04.474072175 +0100
+@@ -22,6 +22,7 @@
+ #include "common.h"
+ 
+ static DEFINE_SPINLOCK(ath79_device_reset_lock);
++static DEFINE_MUTEX(ath79_flash_mutex);
+ 
+ u32 ath79_cpu_freq;
+ EXPORT_SYMBOL_GPL(ath79_cpu_freq);
+@@ -72,10 +73,14 @@
+ 		reg = AR933X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_ar934x())
+ 		reg = AR934X_RESET_REG_RESET_MODULE;
++	else if (soc_is_qca953x())
++		reg = QCA953X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
++	else if (soc_is_qca956x())
++		reg = QCA956X_RESET_REG_RESET_MODULE;
+ 	else
+-		BUG();
++		panic("Reset register not defined for this SOC");
+ 
+ 	spin_lock_irqsave(&ath79_device_reset_lock, flags);
+ 	t = ath79_reset_rr(reg);
+@@ -100,10 +105,14 @@
+ 		reg = AR933X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_ar934x())
+ 		reg = AR934X_RESET_REG_RESET_MODULE;
++	else if (soc_is_qca953x())
++		reg = QCA953X_RESET_REG_RESET_MODULE;
+ 	else if (soc_is_qca955x())
+ 		reg = QCA955X_RESET_REG_RESET_MODULE;
++	else if (soc_is_qca956x())
++		reg = QCA956X_RESET_REG_RESET_MODULE;
+ 	else
+-		BUG();
++		panic("Reset register not defined for this SOC");
+ 
+ 	spin_lock_irqsave(&ath79_device_reset_lock, flags);
+ 	t = ath79_reset_rr(reg);
+@@ -111,3 +120,42 @@
+ 	spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
++
++u32 ath79_device_reset_get(u32 mask)
++{
++	unsigned long flags;
++	u32 reg;
++	u32 ret;
++
++	if (soc_is_ar71xx())
++		reg = AR71XX_RESET_REG_RESET_MODULE;
++	else if (soc_is_ar724x())
++		reg = AR724X_RESET_REG_RESET_MODULE;
++	else if (soc_is_ar913x())
++		reg = AR913X_RESET_REG_RESET_MODULE;
++	else if (soc_is_ar933x())
++		reg = AR933X_RESET_REG_RESET_MODULE;
++	else if (soc_is_ar934x())
++		reg = AR934X_RESET_REG_RESET_MODULE;
++	else
++		BUG();
++
++	spin_lock_irqsave(&ath79_device_reset_lock, flags);
++	ret = ath79_reset_rr(reg);
++	spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
++	return ret;
++}
++EXPORT_SYMBOL_GPL(ath79_device_reset_get);
++
++void ath79_flash_acquire(void)
++{
++	mutex_lock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_acquire);
++
++void ath79_flash_release(void)
++{
++	mutex_unlock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_release);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/common.h linux-4.1.13/arch/mips/ath79/common.h
+--- linux-4.1.13.orig/arch/mips/ath79/common.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/common.h	2015-12-04 19:57:05.893979276 +0100
+@@ -27,6 +27,9 @@
+ void ath79_gpio_function_enable(u32 mask);
+ void ath79_gpio_function_disable(u32 mask);
+ void ath79_gpio_function_setup(u32 set, u32 clear);
++void ath79_gpio_function2_setup(u32 set, u32 clear);
++void ath79_gpio_output_select(unsigned gpio, u8 val);
++int ath79_gpio_direction_select(unsigned gpio, bool oe);
+ void ath79_gpio_init(void);
+ 
+ #endif /* __ATH79_COMMON_H */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-ap9x-pci.c linux-4.1.13/arch/mips/ath79/dev-ap9x-pci.c
+--- linux-4.1.13.orig/arch/mips/ath79/dev-ap9x-pci.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-ap9x-pci.c	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,159 @@
++/*
++ *  Atheros AP9X reference board PCI initialization
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/ath9k_platform.h>
++#include <linux/delay.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "pci-ath9k-fixup.h"
++#include "pci.h"
++
++static struct ath9k_platform_data ap9x_wmac0_data = {
++	.led_pin = -1,
++};
++static struct ath9k_platform_data ap9x_wmac1_data = {
++	.led_pin = -1,
++};
++static char ap9x_wmac0_mac[6];
++static char ap9x_wmac1_mac[6];
++
++__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin)
++{
++	switch (wmac) {
++	case 0:
++		ap9x_wmac0_data.led_pin = pin;
++		break;
++	case 1:
++		ap9x_wmac1_data.led_pin = pin;
++		break;
++	}
++}
++
++__init struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac)
++{
++	switch (wmac) {
++	case 0:
++		return &ap9x_wmac0_data;
++
++	case 1:
++		return &ap9x_wmac1_data;
++	}
++
++	return NULL;
++}
++
++__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val)
++{
++	switch (wmac) {
++	case 0:
++		ap9x_wmac0_data.gpio_mask = mask;
++		ap9x_wmac0_data.gpio_val = val;
++		break;
++	case 1:
++		ap9x_wmac1_data.gpio_mask = mask;
++		ap9x_wmac1_data.gpio_val = val;
++		break;
++	}
++}
++
++__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
++				     int num_leds)
++{
++	switch (wmac) {
++	case 0:
++		ap9x_wmac0_data.leds = leds;
++		ap9x_wmac0_data.num_leds = num_leds;
++		break;
++	case 1:
++		ap9x_wmac1_data.leds = leds;
++		ap9x_wmac1_data.num_leds = num_leds;
++		break;
++	}
++}
++
++static int ap91_pci_plat_dev_init(struct pci_dev *dev)
++{
++	switch (PCI_SLOT(dev->devfn)) {
++	case 0:
++		dev->dev.platform_data = &ap9x_wmac0_data;
++		break;
++	}
++
++	return 0;
++}
++
++__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr)
++{
++	if (cal_data)
++		memcpy(ap9x_wmac0_data.eeprom_data, cal_data,
++		       sizeof(ap9x_wmac0_data.eeprom_data));
++
++	if (mac_addr) {
++		memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac));
++		ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
++	}
++
++	ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init);
++	ath79_register_pci();
++
++	pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data);
++}
++
++__init void ap91_pci_init_simple(void)
++{
++	ap91_pci_init(NULL, NULL);
++	ap9x_wmac0_data.eeprom_name = "pci_wmac0.eeprom";
++}
++
++static int ap94_pci_plat_dev_init(struct pci_dev *dev)
++{
++	switch (PCI_SLOT(dev->devfn)) {
++	case 17:
++		dev->dev.platform_data = &ap9x_wmac0_data;
++		break;
++
++	case 18:
++		dev->dev.platform_data = &ap9x_wmac1_data;
++		break;
++	}
++
++	return 0;
++}
++
++__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
++			  u8 *cal_data1, u8 *mac_addr1)
++{
++	if (cal_data0)
++		memcpy(ap9x_wmac0_data.eeprom_data, cal_data0,
++		       sizeof(ap9x_wmac0_data.eeprom_data));
++
++	if (cal_data1)
++		memcpy(ap9x_wmac1_data.eeprom_data, cal_data1,
++		       sizeof(ap9x_wmac1_data.eeprom_data));
++
++	if (mac_addr0) {
++		memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac));
++		ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
++	}
++
++	if (mac_addr1) {
++		memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac));
++		ap9x_wmac1_data.macaddr = ap9x_wmac1_mac;
++	}
++
++	ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init);
++	ath79_register_pci();
++
++	pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data);
++	pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data);
++}
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-ap9x-pci.h linux-4.1.13/arch/mips/ath79/dev-ap9x-pci.h
+--- linux-4.1.13.orig/arch/mips/ath79/dev-ap9x-pci.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-ap9x-pci.h	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,48 @@
++/*
++ *  Atheros AP9X reference board PCI initialization
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef _ATH79_DEV_AP9X_PCI_H
++#define _ATH79_DEV_AP9X_PCI_H
++
++struct gpio_led;
++struct ath9k_platform_data;
++
++#if defined(CONFIG_ATH79_DEV_AP9X_PCI)
++void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin);
++void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val);
++void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
++			      int num_leds);
++struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac);
++
++void ap91_pci_init(u8 *cal_data, u8 *mac_addr);
++void ap91_pci_init_simple(void);
++void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
++		   u8 *cal_data1, u8 *mac_addr1);
++
++#else
++static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {}
++static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac,
++					    u32 mask, u32 val) {}
++static inline void ap9x_pci_setup_wmac_leds(unsigned wmac,
++					    struct gpio_led *leds,
++					    int num_leds) {}
++static inline struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac)
++{
++	return NULL;
++}
++
++static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {}
++static inline void ap91_pci_init_simple(void) {}
++static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
++				 u8 *cal_data1, u8 *mac_addr1) {}
++#endif
++
++#endif /* _ATH79_DEV_AP9X_PCI_H */
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-common.c linux-4.1.13/arch/mips/ath79/dev-common.c
+--- linux-4.1.13.orig/arch/mips/ath79/dev-common.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-common.c	2015-12-04 19:57:04.474072175 +0100
+@@ -80,11 +80,22 @@
+ 
+ 	uart_clk_rate = ath79_get_sys_clk_rate("uart");
+ 
++	if (soc_is_ar71xx())
++		ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
++	else if (soc_is_ar724x())
++		ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
++	else if (soc_is_ar913x())
++		ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
++	else if (soc_is_ar933x())
++		ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
++
+ 	if (soc_is_ar71xx() ||
+ 	    soc_is_ar724x() ||
+ 	    soc_is_ar913x() ||
+ 	    soc_is_ar934x() ||
+-	    soc_is_qca955x()) {
++	    soc_is_qca953x() ||
++	    soc_is_qca955x() ||
++	    soc_is_qca956x()) {
+ 		ath79_uart_data[0].uartclk = uart_clk_rate;
+ 		platform_device_register(&ath79_uart_device);
+ 	} else if (soc_is_ar933x()) {
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-dsa.c linux-4.1.13/arch/mips/ath79/dev-dsa.c
+--- linux-4.1.13.orig/arch/mips/ath79/dev-dsa.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-dsa.c	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,41 @@
++/*
++ *  Atheros AR71xx DSA switch device support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/version.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-dsa.h"
++
++static struct platform_device ar71xx_dsa_switch_device = {
++	.name		= "dsa",
++	.id		= 0,
++};
++
++void __init ath79_register_dsa(struct device *netdev,
++			       struct device *miidev,
++			       struct dsa_platform_data *d)
++{
++	int i;
++
++	d->netdev = netdev;
++	for (i = 0; i < d->nr_chips; i++)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)
++		d->chip[i].mii_bus = miidev;
++#else
++		d->chip[i].host_dev = miidev;
++#endif
++
++	ar71xx_dsa_switch_device.dev.platform_data = d;
++	platform_device_register(&ar71xx_dsa_switch_device);
++}
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-dsa.h linux-4.1.13/arch/mips/ath79/dev-dsa.h
+--- linux-4.1.13.orig/arch/mips/ath79/dev-dsa.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-dsa.h	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,21 @@
++/*
++ *  Atheros AR71xx DSA switch device support
++ *
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef _ATH79_DEV_DSA_H
++#define _ATH79_DEV_DSA_H
++
++#include <net/dsa.h>
++
++void ath79_register_dsa(struct device *netdev,
++			struct device *miidev,
++			struct dsa_platform_data *d);
++
++#endif /* _ATH79_DEV_DSA_H */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-eth.c linux-4.1.13/arch/mips/ath79/dev-eth.c
+--- linux-4.1.13.orig/arch/mips/ath79/dev-eth.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-eth.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,1254 @@
++/*
++ *  Atheros AR71xx SoC platform devices
++ *
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Parts of this file are based on Atheros 2.6.15 BSP
++ *  Parts of this file are based on Atheros 2.6.31 BSP
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/etherdevice.h>
++#include <linux/platform_device.h>
++#include <linux/serial_8250.h>
++#include <linux/clk.h>
++#include <linux/sizes.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/irq.h>
++
++#include "common.h"
++#include "dev-eth.h"
++
++unsigned char ath79_mac_base[ETH_ALEN] __initdata;
++
++static struct resource ath79_mdio0_resources[] = {
++	{
++		.name	= "mdio_base",
++		.flags	= IORESOURCE_MEM,
++		.start	= AR71XX_GE0_BASE,
++		.end	= AR71XX_GE0_BASE + 0x200 - 1,
++	}
++};
++
++struct ag71xx_mdio_platform_data ath79_mdio0_data;
++
++struct platform_device ath79_mdio0_device = {
++	.name		= "ag71xx-mdio",
++	.id		= 0,
++	.resource	= ath79_mdio0_resources,
++	.num_resources	= ARRAY_SIZE(ath79_mdio0_resources),
++	.dev = {
++		.platform_data = &ath79_mdio0_data,
++	},
++};
++
++static struct resource ath79_mdio1_resources[] = {
++	{
++		.name	= "mdio_base",
++		.flags	= IORESOURCE_MEM,
++		.start	= AR71XX_GE1_BASE,
++		.end	= AR71XX_GE1_BASE + 0x200 - 1,
++	}
++};
++
++struct ag71xx_mdio_platform_data ath79_mdio1_data;
++
++struct platform_device ath79_mdio1_device = {
++	.name		= "ag71xx-mdio",
++	.id		= 1,
++	.resource	= ath79_mdio1_resources,
++	.num_resources	= ARRAY_SIZE(ath79_mdio1_resources),
++	.dev = {
++		.platform_data = &ath79_mdio1_data,
++	},
++};
++
++static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
++{
++	void __iomem *base;
++	u32 t;
++
++	base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++
++	t = __raw_readl(base + cfg_reg);
++	t &= ~(3 << shift);
++	t |=  (2 << shift);
++	__raw_writel(t, base + cfg_reg);
++	udelay(100);
++
++	__raw_writel(pll_val, base + pll_reg);
++
++	t |= (3 << shift);
++	__raw_writel(t, base + cfg_reg);
++	udelay(100);
++
++	t &= ~(3 << shift);
++	__raw_writel(t, base + cfg_reg);
++	udelay(100);
++
++	printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
++		(unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
++
++	iounmap(base);
++}
++
++static void __init ath79_mii_ctrl_set_if(unsigned int reg,
++					  unsigned int mii_if)
++{
++	void __iomem *base;
++	u32 t;
++
++	base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
++
++	t = __raw_readl(base + reg);
++	t &= ~(AR71XX_MII_CTRL_IF_MASK);
++	t |= (mii_if & AR71XX_MII_CTRL_IF_MASK);
++	__raw_writel(t, base + reg);
++
++	iounmap(base);
++}
++
++static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed)
++{
++	void __iomem *base;
++	unsigned int mii_speed;
++	u32 t;
++
++	switch (speed) {
++	case SPEED_10:
++		mii_speed =  AR71XX_MII_CTRL_SPEED_10;
++		break;
++	case SPEED_100:
++		mii_speed =  AR71XX_MII_CTRL_SPEED_100;
++		break;
++	case SPEED_1000:
++		mii_speed =  AR71XX_MII_CTRL_SPEED_1000;
++		break;
++	default:
++		BUG();
++	}
++
++	base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
++
++	t = __raw_readl(base + reg);
++	t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT);
++	t |= mii_speed  << AR71XX_MII_CTRL_SPEED_SHIFT;
++	__raw_writel(t, base + reg);
++
++	iounmap(base);
++}
++
++static unsigned long ar934x_get_mdio_ref_clock(void)
++{
++	void __iomem *base;
++	unsigned long ret;
++	u32 t;
++
++	base = ioremap(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++
++	ret = 0;
++	t = __raw_readl(base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
++	if (t & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) {
++		ret = 100 * 1000 * 1000;
++	} else {
++		struct clk *clk;
++
++		clk = clk_get(NULL, "ref");
++		if (!IS_ERR(clk))
++			ret = clk_get_rate(clk);
++	}
++
++	iounmap(base);
++
++	return ret;
++}
++
++void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
++{
++	struct platform_device *mdio_dev;
++	struct ag71xx_mdio_platform_data *mdio_data;
++	unsigned int max_id;
++
++	if (ath79_soc == ATH79_SOC_AR9341 ||
++	    ath79_soc == ATH79_SOC_AR9342 ||
++	    ath79_soc == ATH79_SOC_AR9344 ||
++	    ath79_soc == ATH79_SOC_QCA9556 ||
++	    ath79_soc == ATH79_SOC_QCA9558)
++		max_id = 1;
++	else
++		max_id = 0;
++
++	if (id > max_id) {
++		printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id);
++		return;
++	}
++
++	switch (ath79_soc) {
++	case ATH79_SOC_AR7241:
++	case ATH79_SOC_AR9330:
++	case ATH79_SOC_AR9331:
++	case ATH79_SOC_QCA9533:
++	case ATH79_SOC_QCA9561:
++	case ATH79_SOC_TP9343:
++		mdio_dev = &ath79_mdio1_device;
++		mdio_data = &ath79_mdio1_data;
++		break;
++
++	case ATH79_SOC_AR9341:
++	case ATH79_SOC_AR9342:
++	case ATH79_SOC_AR9344:
++	case ATH79_SOC_QCA9556:
++	case ATH79_SOC_QCA9558:
++		if (id == 0) {
++			mdio_dev = &ath79_mdio0_device;
++			mdio_data = &ath79_mdio0_data;
++		} else {
++			mdio_dev = &ath79_mdio1_device;
++			mdio_data = &ath79_mdio1_data;
++		}
++		break;
++
++	case ATH79_SOC_AR7242:
++		ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG,
++			       AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000,
++			       AR71XX_ETH0_PLL_SHIFT);
++		/* fall through */
++	default:
++		mdio_dev = &ath79_mdio0_device;
++		mdio_data = &ath79_mdio0_data;
++		break;
++	}
++
++	mdio_data->phy_mask = phy_mask;
++
++	switch (ath79_soc) {
++	case ATH79_SOC_AR7240:
++		mdio_data->is_ar7240 = 1;
++		/* fall through */
++	case ATH79_SOC_AR7241:
++		mdio_data->builtin_switch = 1;
++		break;
++
++	case ATH79_SOC_AR9330:
++		mdio_data->is_ar9330 = 1;
++		/* fall through */
++	case ATH79_SOC_AR9331:
++		mdio_data->builtin_switch = 1;
++		break;
++
++	case ATH79_SOC_AR9341:
++	case ATH79_SOC_AR9342:
++	case ATH79_SOC_AR9344:
++		if (id == 1) {
++			mdio_data->builtin_switch = 1;
++			mdio_data->ref_clock = ar934x_get_mdio_ref_clock();
++			mdio_data->mdio_clock = 6250000;
++		}
++		mdio_data->is_ar934x = 1;
++		break;
++
++	case ATH79_SOC_QCA9533:
++	case ATH79_SOC_QCA9561:
++	case ATH79_SOC_TP9343:
++		mdio_data->builtin_switch = 1;
++		break;
++
++	case ATH79_SOC_QCA9556:
++	case ATH79_SOC_QCA9558:
++		mdio_data->is_ar934x = 1;
++		break;
++
++	default:
++		break;
++	}
++
++	platform_device_register(mdio_dev);
++}
++
++struct ath79_eth_pll_data ath79_eth0_pll_data;
++struct ath79_eth_pll_data ath79_eth1_pll_data;
++
++static u32 ath79_get_eth_pll(unsigned int mac, int speed)
++{
++	struct ath79_eth_pll_data *pll_data;
++	u32 pll_val;
++
++	switch (mac) {
++	case 0:
++		pll_data = &ath79_eth0_pll_data;
++		break;
++	case 1:
++		pll_data = &ath79_eth1_pll_data;
++		break;
++	default:
++		BUG();
++	}
++
++	switch (speed) {
++	case SPEED_10:
++		pll_val = pll_data->pll_10;
++		break;
++	case SPEED_100:
++		pll_val = pll_data->pll_100;
++		break;
++	case SPEED_1000:
++		pll_val = pll_data->pll_1000;
++		break;
++	default:
++		BUG();
++	}
++
++	return pll_val;
++}
++
++static void ath79_set_speed_ge0(int speed)
++{
++	u32 val = ath79_get_eth_pll(0, speed);
++
++	ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
++			val, AR71XX_ETH0_PLL_SHIFT);
++	ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
++}
++
++static void ath79_set_speed_ge1(int speed)
++{
++	u32 val = ath79_get_eth_pll(1, speed);
++
++	ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
++			 val, AR71XX_ETH1_PLL_SHIFT);
++	ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
++}
++
++static void ar7242_set_speed_ge0(int speed)
++{
++	u32 val = ath79_get_eth_pll(0, speed);
++	void __iomem *base;
++
++	base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++	__raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK);
++	iounmap(base);
++}
++
++static void ar91xx_set_speed_ge0(int speed)
++{
++	u32 val = ath79_get_eth_pll(0, speed);
++
++	ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK,
++			 val, AR913X_ETH0_PLL_SHIFT);
++	ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
++}
++
++static void ar91xx_set_speed_ge1(int speed)
++{
++	u32 val = ath79_get_eth_pll(1, speed);
++
++	ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK,
++			 val, AR913X_ETH1_PLL_SHIFT);
++	ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
++}
++
++static void ar934x_set_speed_ge0(int speed)
++{
++	void __iomem *base;
++	u32 val = ath79_get_eth_pll(0, speed);
++
++	base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++	__raw_writel(val, base + AR934X_PLL_ETH_XMII_CONTROL_REG);
++	iounmap(base);
++}
++
++static void qca955x_set_speed_xmii(int speed)
++{
++	void __iomem *base;
++	u32 val = ath79_get_eth_pll(0, speed);
++
++	base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++	__raw_writel(val, base + QCA955X_PLL_ETH_XMII_CONTROL_REG);
++	iounmap(base);
++}
++
++static void qca955x_set_speed_sgmii(int speed)
++{
++	void __iomem *base;
++	u32 val = ath79_get_eth_pll(1, speed);
++
++	base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++	__raw_writel(val, base + QCA955X_PLL_ETH_SGMII_CONTROL_REG);
++	iounmap(base);
++}
++
++static void ath79_set_speed_dummy(int speed)
++{
++}
++
++static void ath79_ddr_no_flush(void)
++{
++}
++
++static void ath79_ddr_flush_ge0(void)
++{
++	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0);
++}
++
++static void ath79_ddr_flush_ge1(void)
++{
++	ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE1);
++}
++
++static void ar724x_ddr_flush_ge0(void)
++{
++	ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE0);
++}
++
++static void ar724x_ddr_flush_ge1(void)
++{
++	ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE1);
++}
++
++static void ar91xx_ddr_flush_ge0(void)
++{
++	ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE0);
++}
++
++static void ar91xx_ddr_flush_ge1(void)
++{
++	ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE1);
++}
++
++static void ar933x_ddr_flush_ge0(void)
++{
++	ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE0);
++}
++
++static void ar933x_ddr_flush_ge1(void)
++{
++	ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1);
++}
++
++static struct resource ath79_eth0_resources[] = {
++	{
++		.name	= "mac_base",
++		.flags	= IORESOURCE_MEM,
++		.start	= AR71XX_GE0_BASE,
++		.end	= AR71XX_GE0_BASE + 0x200 - 1,
++	}, {
++		.name	= "mac_irq",
++		.flags	= IORESOURCE_IRQ,
++		.start	= ATH79_CPU_IRQ(4),
++		.end	= ATH79_CPU_IRQ(4),
++	},
++};
++
++struct ag71xx_platform_data ath79_eth0_data = {
++	.reset_bit	= AR71XX_RESET_GE0_MAC,
++};
++
++struct platform_device ath79_eth0_device = {
++	.name		= "ag71xx",
++	.id		= 0,
++	.resource	= ath79_eth0_resources,
++	.num_resources	= ARRAY_SIZE(ath79_eth0_resources),
++	.dev = {
++		.platform_data = &ath79_eth0_data,
++	},
++};
++
++static struct resource ath79_eth1_resources[] = {
++	{
++		.name	= "mac_base",
++		.flags	= IORESOURCE_MEM,
++		.start	= AR71XX_GE1_BASE,
++		.end	= AR71XX_GE1_BASE + 0x200 - 1,
++	}, {
++		.name	= "mac_irq",
++		.flags	= IORESOURCE_IRQ,
++		.start	= ATH79_CPU_IRQ(5),
++		.end	= ATH79_CPU_IRQ(5),
++	},
++};
++
++struct ag71xx_platform_data ath79_eth1_data = {
++	.reset_bit	= AR71XX_RESET_GE1_MAC,
++};
++
++struct platform_device ath79_eth1_device = {
++	.name		= "ag71xx",
++	.id		= 1,
++	.resource	= ath79_eth1_resources,
++	.num_resources	= ARRAY_SIZE(ath79_eth1_resources),
++	.dev = {
++		.platform_data = &ath79_eth1_data,
++	},
++};
++
++struct ag71xx_switch_platform_data ath79_switch_data;
++
++#define AR71XX_PLL_VAL_1000	0x00110000
++#define AR71XX_PLL_VAL_100	0x00001099
++#define AR71XX_PLL_VAL_10	0x00991099
++
++#define AR724X_PLL_VAL_1000	0x00110000
++#define AR724X_PLL_VAL_100	0x00001099
++#define AR724X_PLL_VAL_10	0x00991099
++
++#define AR7242_PLL_VAL_1000	0x16000000
++#define AR7242_PLL_VAL_100	0x00000101
++#define AR7242_PLL_VAL_10	0x00001616
++
++#define AR913X_PLL_VAL_1000	0x1a000000
++#define AR913X_PLL_VAL_100	0x13000a44
++#define AR913X_PLL_VAL_10	0x00441099
++
++#define AR933X_PLL_VAL_1000	0x00110000
++#define AR933X_PLL_VAL_100	0x00001099
++#define AR933X_PLL_VAL_10	0x00991099
++
++#define AR934X_PLL_VAL_1000	0x16000000
++#define AR934X_PLL_VAL_100	0x00000101
++#define AR934X_PLL_VAL_10	0x00001616
++
++static void __init ath79_init_eth_pll_data(unsigned int id)
++{
++	struct ath79_eth_pll_data *pll_data;
++	u32 pll_10, pll_100, pll_1000;
++
++	switch (id) {
++	case 0:
++		pll_data = &ath79_eth0_pll_data;
++		break;
++	case 1:
++		pll_data = &ath79_eth1_pll_data;
++		break;
++	default:
++		BUG();
++	}
++
++	switch (ath79_soc) {
++	case ATH79_SOC_AR7130:
++	case ATH79_SOC_AR7141:
++	case ATH79_SOC_AR7161:
++		pll_10 = AR71XX_PLL_VAL_10;
++		pll_100 = AR71XX_PLL_VAL_100;
++		pll_1000 = AR71XX_PLL_VAL_1000;
++		break;
++
++	case ATH79_SOC_AR7240:
++	case ATH79_SOC_AR7241:
++		pll_10 = AR724X_PLL_VAL_10;
++		pll_100 = AR724X_PLL_VAL_100;
++		pll_1000 = AR724X_PLL_VAL_1000;
++		break;
++
++	case ATH79_SOC_AR7242:
++		pll_10 = AR7242_PLL_VAL_10;
++		pll_100 = AR7242_PLL_VAL_100;
++		pll_1000 = AR7242_PLL_VAL_1000;
++		break;
++
++	case ATH79_SOC_AR9130:
++	case ATH79_SOC_AR9132:
++		pll_10 = AR913X_PLL_VAL_10;
++		pll_100 = AR913X_PLL_VAL_100;
++		pll_1000 = AR913X_PLL_VAL_1000;
++		break;
++
++	case ATH79_SOC_AR9330:
++	case ATH79_SOC_AR9331:
++		pll_10 = AR933X_PLL_VAL_10;
++		pll_100 = AR933X_PLL_VAL_100;
++		pll_1000 = AR933X_PLL_VAL_1000;
++		break;
++
++	case ATH79_SOC_AR9341:
++	case ATH79_SOC_AR9342:
++	case ATH79_SOC_AR9344:
++	case ATH79_SOC_QCA9533:
++	case ATH79_SOC_QCA9556:
++	case ATH79_SOC_QCA9558:
++	case ATH79_SOC_QCA9561:
++	case ATH79_SOC_TP9343:
++		pll_10 = AR934X_PLL_VAL_10;
++		pll_100 = AR934X_PLL_VAL_100;
++		pll_1000 = AR934X_PLL_VAL_1000;
++		break;
++
++	default:
++		BUG();
++	}
++
++	if (!pll_data->pll_10)
++		pll_data->pll_10 = pll_10;
++
++	if (!pll_data->pll_100)
++		pll_data->pll_100 = pll_100;
++
++	if (!pll_data->pll_1000)
++		pll_data->pll_1000 = pll_1000;
++}
++
++static int __init ath79_setup_phy_if_mode(unsigned int id,
++					   struct ag71xx_platform_data *pdata)
++{
++	unsigned int mii_if;
++
++	switch (id) {
++	case 0:
++		switch (ath79_soc) {
++		case ATH79_SOC_AR7130:
++		case ATH79_SOC_AR7141:
++		case ATH79_SOC_AR7161:
++		case ATH79_SOC_AR9130:
++		case ATH79_SOC_AR9132:
++			switch (pdata->phy_if_mode) {
++			case PHY_INTERFACE_MODE_MII:
++				mii_if = AR71XX_MII0_CTRL_IF_MII;
++				break;
++			case PHY_INTERFACE_MODE_GMII:
++				mii_if = AR71XX_MII0_CTRL_IF_GMII;
++				break;
++			case PHY_INTERFACE_MODE_RGMII:
++				mii_if = AR71XX_MII0_CTRL_IF_RGMII;
++				break;
++			case PHY_INTERFACE_MODE_RMII:
++				mii_if = AR71XX_MII0_CTRL_IF_RMII;
++				break;
++			default:
++				return -EINVAL;
++			}
++			ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if);
++			break;
++
++		case ATH79_SOC_AR7240:
++		case ATH79_SOC_AR7241:
++		case ATH79_SOC_AR9330:
++		case ATH79_SOC_AR9331:
++		case ATH79_SOC_QCA9533:
++		case ATH79_SOC_TP9343:
++			pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
++			break;
++
++		case ATH79_SOC_AR7242:
++			/* FIXME */
++
++		case ATH79_SOC_AR9341:
++		case ATH79_SOC_AR9342:
++		case ATH79_SOC_AR9344:
++			switch (pdata->phy_if_mode) {
++			case PHY_INTERFACE_MODE_MII:
++			case PHY_INTERFACE_MODE_GMII:
++			case PHY_INTERFACE_MODE_RGMII:
++			case PHY_INTERFACE_MODE_RMII:
++				break;
++			default:
++				return -EINVAL;
++			}
++			break;
++
++		case ATH79_SOC_QCA9556:
++		case ATH79_SOC_QCA9558:
++			switch (pdata->phy_if_mode) {
++			case PHY_INTERFACE_MODE_MII:
++			case PHY_INTERFACE_MODE_RGMII:
++			case PHY_INTERFACE_MODE_SGMII:
++				break;
++			default:
++				return -EINVAL;
++			}
++			break;
++
++		case ATH79_SOC_QCA9561:
++			if (!pdata->phy_if_mode)
++				pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
++			break;
++
++		default:
++			BUG();
++		}
++		break;
++	case 1:
++		switch (ath79_soc) {
++		case ATH79_SOC_AR7130:
++		case ATH79_SOC_AR7141:
++		case ATH79_SOC_AR7161:
++		case ATH79_SOC_AR9130:
++		case ATH79_SOC_AR9132:
++			switch (pdata->phy_if_mode) {
++			case PHY_INTERFACE_MODE_RMII:
++				mii_if = AR71XX_MII1_CTRL_IF_RMII;
++				break;
++			case PHY_INTERFACE_MODE_RGMII:
++				mii_if = AR71XX_MII1_CTRL_IF_RGMII;
++				break;
++			default:
++				return -EINVAL;
++			}
++			ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if);
++			break;
++
++		case ATH79_SOC_AR7240:
++		case ATH79_SOC_AR7241:
++		case ATH79_SOC_AR9330:
++		case ATH79_SOC_AR9331:
++		case ATH79_SOC_QCA9561:
++		case ATH79_SOC_TP9343:
++			pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
++			break;
++
++		case ATH79_SOC_AR7242:
++			/* FIXME */
++
++		case ATH79_SOC_AR9341:
++		case ATH79_SOC_AR9342:
++		case ATH79_SOC_AR9344:
++		case ATH79_SOC_QCA9533:
++			switch (pdata->phy_if_mode) {
++			case PHY_INTERFACE_MODE_MII:
++			case PHY_INTERFACE_MODE_GMII:
++				break;
++			default:
++				return -EINVAL;
++			}
++			break;
++
++		case ATH79_SOC_QCA9556:
++		case ATH79_SOC_QCA9558:
++			switch (pdata->phy_if_mode) {
++			case PHY_INTERFACE_MODE_MII:
++			case PHY_INTERFACE_MODE_RGMII:
++			case PHY_INTERFACE_MODE_SGMII:
++				break;
++			default:
++				return -EINVAL;
++			}
++			break;
++
++		default:
++			BUG();
++		}
++		break;
++	}
++
++	return 0;
++}
++
++void __init ath79_setup_ar933x_phy4_switch(bool mac, bool mdio)
++{
++	void __iomem *base;
++	u32 t;
++
++	base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE);
++
++	t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
++	t &= ~(AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
++	if (mac)
++		t |= AR933X_ETH_CFG_SW_PHY_SWAP;
++	if (mdio)
++		t |= AR933X_ETH_CFG_SW_PHY_ADDR_SWAP;
++	__raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG);
++
++	iounmap(base);
++}
++
++void __init ath79_setup_ar934x_eth_cfg(u32 mask)
++{
++	void __iomem *base;
++	u32 t;
++
++	base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
++
++	t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
++
++	t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 |
++	       AR934X_ETH_CFG_MII_GMAC0 |
++	       AR934X_ETH_CFG_GMII_GMAC0 |
++	       AR934X_ETH_CFG_SW_ONLY_MODE |
++	       AR934X_ETH_CFG_SW_PHY_SWAP);
++
++	t |= mask;
++
++	__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
++	/* flush write */
++	__raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
++
++	iounmap(base);
++}
++
++void __init ath79_setup_ar934x_eth_rx_delay(unsigned int rxd,
++					    unsigned int rxdv)
++{
++	void __iomem *base;
++	u32 t;
++
++	rxd &= AR934X_ETH_CFG_RXD_DELAY_MASK;
++	rxdv &= AR934X_ETH_CFG_RDV_DELAY_MASK;
++
++	base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
++
++	t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
++
++	t &= ~(AR934X_ETH_CFG_RXD_DELAY_MASK << AR934X_ETH_CFG_RXD_DELAY_SHIFT |
++	       AR934X_ETH_CFG_RDV_DELAY_MASK << AR934X_ETH_CFG_RDV_DELAY_SHIFT);
++
++	t |= (rxd << AR934X_ETH_CFG_RXD_DELAY_SHIFT |
++	      rxdv << AR934X_ETH_CFG_RDV_DELAY_SHIFT);
++
++	__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
++	/* flush write */
++	__raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
++
++	iounmap(base);
++}
++
++void __init ath79_setup_qca955x_eth_cfg(u32 mask)
++{
++	void __iomem *base;
++	u32 t;
++
++	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
++
++	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
++
++	t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
++
++	t |= mask;
++
++	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
++
++	iounmap(base);
++}
++
++static int ath79_eth_instance __initdata;
++void __init ath79_register_eth(unsigned int id)
++{
++	struct platform_device *pdev;
++	struct ag71xx_platform_data *pdata;
++	int err;
++
++	if (id > 1) {
++		printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
++		return;
++	}
++
++	ath79_init_eth_pll_data(id);
++
++	if (id == 0)
++		pdev = &ath79_eth0_device;
++	else
++		pdev = &ath79_eth1_device;
++
++	pdata = pdev->dev.platform_data;
++
++	pdata->max_frame_len = 1540;
++	pdata->desc_pktlen_mask = 0xfff;
++
++	err = ath79_setup_phy_if_mode(id, pdata);
++	if (err) {
++		printk(KERN_ERR
++		       "ar71xx: invalid PHY interface mode for GE%u\n", id);
++		return;
++	}
++
++	switch (ath79_soc) {
++	case ATH79_SOC_AR7130:
++		if (id == 0) {
++			pdata->ddr_flush = ath79_ddr_flush_ge0;
++			pdata->set_speed = ath79_set_speed_ge0;
++		} else {
++			pdata->ddr_flush = ath79_ddr_flush_ge1;
++			pdata->set_speed = ath79_set_speed_ge1;
++		}
++		break;
++
++	case ATH79_SOC_AR7141:
++	case ATH79_SOC_AR7161:
++		if (id == 0) {
++			pdata->ddr_flush = ath79_ddr_flush_ge0;
++			pdata->set_speed = ath79_set_speed_ge0;
++		} else {
++			pdata->ddr_flush = ath79_ddr_flush_ge1;
++			pdata->set_speed = ath79_set_speed_ge1;
++		}
++		pdata->has_gbit = 1;
++		break;
++
++	case ATH79_SOC_AR7242:
++		if (id == 0) {
++			pdata->reset_bit |= AR724X_RESET_GE0_MDIO |
++					    AR71XX_RESET_GE0_PHY;
++			pdata->ddr_flush = ar724x_ddr_flush_ge0;
++			pdata->set_speed = ar7242_set_speed_ge0;
++		} else {
++			pdata->reset_bit |= AR724X_RESET_GE1_MDIO |
++					    AR71XX_RESET_GE1_PHY;
++			pdata->ddr_flush = ar724x_ddr_flush_ge1;
++			pdata->set_speed = ath79_set_speed_dummy;
++		}
++		pdata->has_gbit = 1;
++		pdata->is_ar724x = 1;
++
++		if (!pdata->fifo_cfg1)
++			pdata->fifo_cfg1 = 0x0010ffff;
++		if (!pdata->fifo_cfg2)
++			pdata->fifo_cfg2 = 0x015500aa;
++		if (!pdata->fifo_cfg3)
++			pdata->fifo_cfg3 = 0x01f00140;
++		break;
++
++	case ATH79_SOC_AR7241:
++		if (id == 0)
++			pdata->reset_bit |= AR724X_RESET_GE0_MDIO;
++		else
++			pdata->reset_bit |= AR724X_RESET_GE1_MDIO;
++		/* fall through */
++	case ATH79_SOC_AR7240:
++		if (id == 0) {
++			pdata->reset_bit |= AR71XX_RESET_GE0_PHY;
++			pdata->ddr_flush = ar724x_ddr_flush_ge0;
++			pdata->set_speed = ath79_set_speed_dummy;
++
++			pdata->phy_mask = BIT(4);
++		} else {
++			pdata->reset_bit |= AR71XX_RESET_GE1_PHY;
++			pdata->ddr_flush = ar724x_ddr_flush_ge1;
++			pdata->set_speed = ath79_set_speed_dummy;
++
++			pdata->speed = SPEED_1000;
++			pdata->duplex = DUPLEX_FULL;
++			pdata->switch_data = &ath79_switch_data;
++
++			ath79_switch_data.phy_poll_mask |= BIT(4);
++		}
++		pdata->has_gbit = 1;
++		pdata->is_ar724x = 1;
++		if (ath79_soc == ATH79_SOC_AR7240)
++			pdata->is_ar7240 = 1;
++
++		if (!pdata->fifo_cfg1)
++			pdata->fifo_cfg1 = 0x0010ffff;
++		if (!pdata->fifo_cfg2)
++			pdata->fifo_cfg2 = 0x015500aa;
++		if (!pdata->fifo_cfg3)
++			pdata->fifo_cfg3 = 0x01f00140;
++		break;
++
++	case ATH79_SOC_AR9130:
++		if (id == 0) {
++			pdata->ddr_flush = ar91xx_ddr_flush_ge0;
++			pdata->set_speed = ar91xx_set_speed_ge0;
++		} else {
++			pdata->ddr_flush = ar91xx_ddr_flush_ge1;
++			pdata->set_speed = ar91xx_set_speed_ge1;
++		}
++		pdata->is_ar91xx = 1;
++		break;
++
++	case ATH79_SOC_AR9132:
++		if (id == 0) {
++			pdata->ddr_flush = ar91xx_ddr_flush_ge0;
++			pdata->set_speed = ar91xx_set_speed_ge0;
++		} else {
++			pdata->ddr_flush = ar91xx_ddr_flush_ge1;
++			pdata->set_speed = ar91xx_set_speed_ge1;
++		}
++		pdata->is_ar91xx = 1;
++		pdata->has_gbit = 1;
++		break;
++
++	case ATH79_SOC_AR9330:
++	case ATH79_SOC_AR9331:
++		if (id == 0) {
++			pdata->reset_bit = AR933X_RESET_GE0_MAC |
++					   AR933X_RESET_GE0_MDIO;
++			pdata->ddr_flush = ar933x_ddr_flush_ge0;
++			pdata->set_speed = ath79_set_speed_dummy;
++
++			pdata->phy_mask = BIT(4);
++		} else {
++			pdata->reset_bit = AR933X_RESET_GE1_MAC |
++					   AR933X_RESET_GE1_MDIO;
++			pdata->ddr_flush = ar933x_ddr_flush_ge1;
++			pdata->set_speed = ath79_set_speed_dummy;
++
++			pdata->speed = SPEED_1000;
++			pdata->has_gbit = 1;
++			pdata->duplex = DUPLEX_FULL;
++			pdata->switch_data = &ath79_switch_data;
++
++			ath79_switch_data.phy_poll_mask |= BIT(4);
++		}
++
++		pdata->is_ar724x = 1;
++
++		if (!pdata->fifo_cfg1)
++			pdata->fifo_cfg1 = 0x0010ffff;
++		if (!pdata->fifo_cfg2)
++			pdata->fifo_cfg2 = 0x015500aa;
++		if (!pdata->fifo_cfg3)
++			pdata->fifo_cfg3 = 0x01f00140;
++		break;
++
++	case ATH79_SOC_AR9341:
++	case ATH79_SOC_AR9342:
++	case ATH79_SOC_AR9344:
++	case ATH79_SOC_QCA9533:
++		if (id == 0) {
++			pdata->reset_bit = AR934X_RESET_GE0_MAC |
++					   AR934X_RESET_GE0_MDIO;
++			pdata->set_speed = ar934x_set_speed_ge0;
++		} else {
++			pdata->reset_bit = AR934X_RESET_GE1_MAC |
++					   AR934X_RESET_GE1_MDIO;
++			pdata->set_speed = ath79_set_speed_dummy;
++
++			pdata->switch_data = &ath79_switch_data;
++
++			/* reset the built-in switch */
++			ath79_device_reset_set(AR934X_RESET_ETH_SWITCH);
++			ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH);
++		}
++
++		pdata->ddr_flush = ath79_ddr_no_flush;
++		pdata->has_gbit = 1;
++		pdata->is_ar724x = 1;
++
++		pdata->max_frame_len = SZ_16K - 1;
++		pdata->desc_pktlen_mask = SZ_16K - 1;
++
++		if (!pdata->fifo_cfg1)
++			pdata->fifo_cfg1 = 0x0010ffff;
++		if (!pdata->fifo_cfg2)
++			pdata->fifo_cfg2 = 0x015500aa;
++		if (!pdata->fifo_cfg3)
++			pdata->fifo_cfg3 = 0x01f00140;
++		break;
++
++	case ATH79_SOC_QCA9561:
++	case ATH79_SOC_TP9343:
++		if (id == 0) {
++			pdata->reset_bit = AR933X_RESET_GE0_MAC |
++					   AR933X_RESET_GE0_MDIO;
++			pdata->set_speed = ath79_set_speed_dummy;
++
++			if (!pdata->phy_mask)
++				pdata->phy_mask = BIT(4);
++		} else {
++			pdata->reset_bit = AR933X_RESET_GE1_MAC |
++					   AR933X_RESET_GE1_MDIO;
++			pdata->set_speed = ath79_set_speed_dummy;
++
++			pdata->speed = SPEED_1000;
++			pdata->duplex = DUPLEX_FULL;
++			pdata->switch_data = &ath79_switch_data;
++
++			ath79_switch_data.phy_poll_mask |= BIT(4);
++		}
++
++		pdata->ddr_flush = ath79_ddr_no_flush;
++		pdata->has_gbit = 1;
++		pdata->is_ar724x = 1;
++
++		if (!pdata->fifo_cfg1)
++			pdata->fifo_cfg1 = 0x0010ffff;
++		if (!pdata->fifo_cfg2)
++			pdata->fifo_cfg2 = 0x015500aa;
++		if (!pdata->fifo_cfg3)
++			pdata->fifo_cfg3 = 0x01f00140;
++		break;
++
++	case ATH79_SOC_QCA9556:
++	case ATH79_SOC_QCA9558:
++		if (id == 0) {
++			pdata->reset_bit = QCA955X_RESET_GE0_MAC |
++					   QCA955X_RESET_GE0_MDIO;
++			pdata->set_speed = qca955x_set_speed_xmii;
++		} else {
++			pdata->reset_bit = QCA955X_RESET_GE1_MAC |
++					   QCA955X_RESET_GE1_MDIO;
++			pdata->set_speed = qca955x_set_speed_sgmii;
++		}
++
++		pdata->ddr_flush = ath79_ddr_no_flush;
++		pdata->has_gbit = 1;
++		pdata->is_ar724x = 1;
++
++		/*
++		 * Limit the maximum frame length to 4095 bytes.
++		 * Although the documentation says that the hardware
++		 * limit is 16383 bytes but that does not work in
++		 * practice. It seems that the hardware only updates
++		 * the lowest 12 bits of the packet length field
++		 * in the RX descriptor.
++		 */
++		pdata->max_frame_len = SZ_4K - 1;
++		pdata->desc_pktlen_mask = SZ_16K - 1;
++
++		if (!pdata->fifo_cfg1)
++			pdata->fifo_cfg1 = 0x0010ffff;
++		if (!pdata->fifo_cfg2)
++			pdata->fifo_cfg2 = 0x015500aa;
++		if (!pdata->fifo_cfg3)
++			pdata->fifo_cfg3 = 0x01f00140;
++		break;
++
++	default:
++		BUG();
++	}
++
++	switch (pdata->phy_if_mode) {
++	case PHY_INTERFACE_MODE_GMII:
++	case PHY_INTERFACE_MODE_RGMII:
++	case PHY_INTERFACE_MODE_SGMII:
++		if (!pdata->has_gbit) {
++			printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
++					id);
++			return;
++		}
++		/* fallthrough */
++	default:
++		break;
++	}
++
++	if (!is_valid_ether_addr(pdata->mac_addr)) {
++		random_ether_addr(pdata->mac_addr);
++		printk(KERN_DEBUG
++			"ar71xx: using random MAC address for eth%d\n",
++			ath79_eth_instance);
++	}
++
++	if (pdata->mii_bus_dev == NULL) {
++		switch (ath79_soc) {
++		case ATH79_SOC_AR9341:
++		case ATH79_SOC_AR9342:
++		case ATH79_SOC_AR9344:
++			if (id == 0)
++				pdata->mii_bus_dev = &ath79_mdio0_device.dev;
++			else
++				pdata->mii_bus_dev = &ath79_mdio1_device.dev;
++			break;
++
++		case ATH79_SOC_AR7241:
++		case ATH79_SOC_AR9330:
++		case ATH79_SOC_AR9331:
++		case ATH79_SOC_QCA9533:
++		case ATH79_SOC_QCA9561:
++		case ATH79_SOC_TP9343:
++			pdata->mii_bus_dev = &ath79_mdio1_device.dev;
++			break;
++
++		case ATH79_SOC_QCA9556:
++		case ATH79_SOC_QCA9558:
++			/* don't assign any MDIO device by default */
++			break;
++
++		default:
++			pdata->mii_bus_dev = &ath79_mdio0_device.dev;
++			break;
++		}
++	}
++
++	/* Reset the device */
++	ath79_device_reset_set(pdata->reset_bit);
++	msleep(100);
++
++	ath79_device_reset_clear(pdata->reset_bit);
++	msleep(100);
++
++	platform_device_register(pdev);
++	ath79_eth_instance++;
++}
++
++void __init ath79_set_mac_base(unsigned char *mac)
++{
++	memcpy(ath79_mac_base, mac, ETH_ALEN);
++}
++
++void __init ath79_parse_ascii_mac(char *mac_str, u8 *mac)
++{
++	int t;
++
++	t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++		   &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
++
++	if (t != ETH_ALEN)
++		t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
++			&mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
++
++	if (t != ETH_ALEN || !is_valid_ether_addr(mac)) {
++		memset(mac, 0, ETH_ALEN);
++		printk(KERN_DEBUG "ar71xx: invalid mac address \"%s\"\n",
++		       mac_str);
++	}
++}
++
++static void __init ath79_set_mac_base_ascii(char *str)
++{
++	u8 mac[ETH_ALEN];
++
++	ath79_parse_ascii_mac(str, mac);
++	ath79_set_mac_base(mac);
++}
++
++static int __init ath79_ethaddr_setup(char *str)
++{
++	ath79_set_mac_base_ascii(str);
++	return 1;
++}
++__setup("ethaddr=", ath79_ethaddr_setup);
++
++static int __init ath79_kmac_setup(char *str)
++{
++	ath79_set_mac_base_ascii(str);
++	return 1;
++}
++__setup("kmac=", ath79_kmac_setup);
++
++void __init ath79_init_mac(unsigned char *dst, const unsigned char *src,
++			    int offset)
++{
++	int t;
++
++	if (!dst)
++		return;
++
++	if (!src || !is_valid_ether_addr(src)) {
++		memset(dst, '\0', ETH_ALEN);
++		return;
++	}
++
++	t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]);
++	t += offset;
++
++	dst[0] = src[0];
++	dst[1] = src[1];
++	dst[2] = src[2];
++	dst[3] = (t >> 16) & 0xff;
++	dst[4] = (t >> 8) & 0xff;
++	dst[5] = t & 0xff;
++}
++
++void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src)
++{
++	int i;
++
++	if (!dst)
++		return;
++
++	if (!src || !is_valid_ether_addr(src)) {
++		memset(dst, '\0', ETH_ALEN);
++		return;
++	}
++
++	for (i = 0; i < ETH_ALEN; i++)
++		dst[i] = src[i];
++	dst[0] |= 0x02;
++}
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-eth.h linux-4.1.13/arch/mips/ath79/dev-eth.h
+--- linux-4.1.13.orig/arch/mips/ath79/dev-eth.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-eth.h	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,53 @@
++/*
++ *  Atheros AR71xx SoC device definitions
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef _ATH79_DEV_ETH_H
++#define _ATH79_DEV_ETH_H
++
++#include <asm/mach-ath79/ag71xx_platform.h>
++
++struct platform_device;
++
++extern unsigned char ath79_mac_base[] __initdata;
++void ath79_parse_ascii_mac(char *mac_str, u8 *mac);
++void ath79_init_mac(unsigned char *dst, const unsigned char *src,
++		    int offset);
++void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
++
++struct ath79_eth_pll_data {
++	u32	pll_10;
++	u32	pll_100;
++	u32	pll_1000;
++};
++
++extern struct ath79_eth_pll_data ath79_eth0_pll_data;
++extern struct ath79_eth_pll_data ath79_eth1_pll_data;
++
++extern struct ag71xx_platform_data ath79_eth0_data;
++extern struct ag71xx_platform_data ath79_eth1_data;
++extern struct platform_device ath79_eth0_device;
++extern struct platform_device ath79_eth1_device;
++void ath79_register_eth(unsigned int id);
++
++extern struct ag71xx_switch_platform_data ath79_switch_data;
++
++extern struct ag71xx_mdio_platform_data ath79_mdio0_data;
++extern struct ag71xx_mdio_platform_data ath79_mdio1_data;
++extern struct platform_device ath79_mdio0_device;
++extern struct platform_device ath79_mdio1_device;
++void ath79_register_mdio(unsigned int id, u32 phy_mask);
++
++void ath79_setup_ar933x_phy4_switch(bool mac, bool mdio);
++void ath79_setup_ar934x_eth_cfg(u32 mask);
++void ath79_setup_ar934x_eth_rx_delay(unsigned int rxd, unsigned int rxdv);
++void ath79_setup_qca955x_eth_cfg(u32 mask);
++
++#endif /* _ATH79_DEV_ETH_H */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-m25p80.c linux-4.1.13/arch/mips/ath79/dev-m25p80.c
+--- linux-4.1.13.orig/arch/mips/ath79/dev-m25p80.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-m25p80.c	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,118 @@
++/*
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/concat.h>
++
++#include "dev-spi.h"
++#include "dev-m25p80.h"
++
++static struct ath79_spi_controller_data ath79_spi0_cdata =
++{
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++};
++
++static struct ath79_spi_controller_data ath79_spi1_cdata =
++{
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 1,
++};
++
++static struct spi_board_info ath79_spi_info[] = {
++	{
++		.bus_num	= 0,
++		.chip_select	= 0,
++		.max_speed_hz	= 25000000,
++		.modalias	= "m25p80",
++		.controller_data = &ath79_spi0_cdata,
++	},
++	{
++		.bus_num	= 0,
++		.chip_select	= 1,
++		.max_speed_hz   = 25000000,
++		.modalias	= "m25p80",
++		.controller_data = &ath79_spi1_cdata,
++	}
++};
++
++static struct ath79_spi_platform_data ath79_spi_data;
++
++void __init ath79_register_m25p80(struct flash_platform_data *pdata)
++{
++	ath79_spi_data.bus_num = 0;
++	ath79_spi_data.num_chipselect = 1;
++	ath79_spi0_cdata.is_flash = true;
++	ath79_spi_info[0].platform_data = pdata;
++	ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1);
++}
++
++static struct flash_platform_data *multi_pdata;
++
++static struct mtd_info *concat_devs[2] = { NULL, NULL };
++static struct work_struct mtd_concat_work;
++
++static void mtd_concat_add_work(struct work_struct *work)
++{
++	struct mtd_info *mtd;
++
++	mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash");
++
++	mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts);
++}
++
++static void mtd_concat_add(struct mtd_info *mtd)
++{
++	static bool registered = false;
++
++	if (registered)
++		return;
++
++	if (!strcmp(mtd->name, "spi0.0"))
++		concat_devs[0] = mtd;
++	else if (!strcmp(mtd->name, "spi0.1"))
++		concat_devs[1] = mtd;
++	else
++		return;
++
++	if (!concat_devs[0] || !concat_devs[1])
++		return;
++
++	registered = true;
++	INIT_WORK(&mtd_concat_work, mtd_concat_add_work);
++	schedule_work(&mtd_concat_work);
++}
++
++static void mtd_concat_remove(struct mtd_info *mtd)
++{
++}
++
++static void add_mtd_concat_notifier(void)
++{
++	static struct mtd_notifier not = {
++		.add = mtd_concat_add,
++		.remove = mtd_concat_remove,
++	};
++
++	register_mtd_user(&not);
++}
++
++
++void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata)
++{
++	multi_pdata = pdata;
++	add_mtd_concat_notifier();
++	ath79_spi_data.bus_num = 0;
++	ath79_spi_data.num_chipselect = 2;
++	ath79_spi0_cdata.is_flash = true;
++	ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
++}
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-m25p80.h linux-4.1.13/arch/mips/ath79/dev-m25p80.h
+--- linux-4.1.13.orig/arch/mips/ath79/dev-m25p80.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-m25p80.h	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,17 @@
++/*
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef _ATH79_DEV_M25P80_H
++#define _ATH79_DEV_M25P80_H
++
++#include <linux/spi/flash.h>
++
++void ath79_register_m25p80(struct flash_platform_data *pdata) __init;
++void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init;
++
++#endif /* _ATH79_DEV_M25P80_H */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-nfc.c linux-4.1.13/arch/mips/ath79/dev-nfc.c
+--- linux-4.1.13.orig/arch/mips/ath79/dev-nfc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-nfc.c	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,141 @@
++/*
++ *  Atheros AR934X SoCs built-in NAND flash controller support
++ *
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <linux/dma-mapping.h>
++#include <linux/etherdevice.h>
++#include <linux/platform_device.h>
++#include <linux/platform/ar934x_nfc.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "dev-nfc.h"
++
++static struct resource ath79_nfc_resources[2];
++static u64 ar934x_nfc_dmamask = DMA_BIT_MASK(32);
++static struct ar934x_nfc_platform_data ath79_nfc_data;
++
++static struct platform_device ath79_nfc_device = {
++	.name		= AR934X_NFC_DRIVER_NAME,
++	.id		= -1,
++	.resource	= ath79_nfc_resources,
++	.num_resources	= ARRAY_SIZE(ath79_nfc_resources),
++	.dev = {
++		.dma_mask = &ar934x_nfc_dmamask,
++		.coherent_dma_mask = DMA_BIT_MASK(32),
++		.platform_data = &ath79_nfc_data,
++	},
++};
++
++static void __init ath79_nfc_init_resource(struct resource res[2],
++					   unsigned long base,
++					   unsigned long size,
++					   int irq)
++{
++	memset(res, 0, sizeof(struct resource) * 2);
++
++	res[0].flags = IORESOURCE_MEM;
++	res[0].start = base;
++	res[0].end = base + size - 1;
++
++	res[1].flags = IORESOURCE_IRQ;
++	res[1].start = irq;
++	res[1].end = irq;
++}
++
++static void ar934x_nfc_hw_reset(bool active)
++{
++	if (active) {
++		ath79_device_reset_set(AR934X_RESET_NANDF);
++		udelay(100);
++
++		ath79_device_reset_set(AR934X_RESET_ETH_SWITCH_ANALOG);
++		udelay(250);
++	} else {
++		ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH_ANALOG);
++		udelay(250);
++
++		ath79_device_reset_clear(AR934X_RESET_NANDF);
++		udelay(100);
++	}
++}
++
++static void ar934x_nfc_setup(void)
++{
++	ath79_nfc_data.hw_reset = ar934x_nfc_hw_reset;
++
++	ath79_nfc_init_resource(ath79_nfc_resources,
++				AR934X_NFC_BASE, AR934X_NFC_SIZE,
++				ATH79_MISC_IRQ(21));
++
++	platform_device_register(&ath79_nfc_device);
++}
++
++static void qca955x_nfc_hw_reset(bool active)
++{
++	if (active) {
++		ath79_device_reset_set(QCA955X_RESET_NANDF);
++		udelay(250);
++	} else {
++		ath79_device_reset_clear(QCA955X_RESET_NANDF);
++		udelay(100);
++	}
++}
++
++static void qca955x_nfc_setup(void)
++{
++	ath79_nfc_data.hw_reset = qca955x_nfc_hw_reset;
++
++	ath79_nfc_init_resource(ath79_nfc_resources,
++				QCA955X_NFC_BASE, QCA955X_NFC_SIZE,
++				ATH79_MISC_IRQ(21));
++
++	platform_device_register(&ath79_nfc_device);
++}
++
++void __init ath79_nfc_set_select_chip(void (*f)(int chip_no))
++{
++	ath79_nfc_data.select_chip = f;
++}
++
++void __init ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd))
++{
++	ath79_nfc_data.scan_fixup = f;
++}
++
++void __init ath79_nfc_set_swap_dma(bool enable)
++{
++	ath79_nfc_data.swap_dma = enable;
++}
++
++void __init ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode)
++{
++	ath79_nfc_data.ecc_mode = mode;
++}
++
++void __init ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts)
++{
++	ath79_nfc_data.parts = parts;
++	ath79_nfc_data.nr_parts = nr_parts;
++}
++
++void __init ath79_register_nfc(void)
++{
++	if (soc_is_ar934x())
++		ar934x_nfc_setup();
++	else if (soc_is_qca955x())
++		qca955x_nfc_setup();
++	else
++		BUG();
++}
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-nfc.h linux-4.1.13/arch/mips/ath79/dev-nfc.h
+--- linux-4.1.13.orig/arch/mips/ath79/dev-nfc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-nfc.h	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,34 @@
++/*
++ *  Atheros AR934X SoCs built-in NAND Flash Controller support
++ *
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef _ATH79_DEV_NFC_H
++#define _ATH79_DEV_NFC_H
++
++struct mtd_partition;
++enum ar934x_nfc_ecc_mode;
++
++#ifdef CONFIG_ATH79_DEV_NFC
++void ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts);
++void ath79_nfc_set_select_chip(void (*f)(int chip_no));
++void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd));
++void ath79_nfc_set_swap_dma(bool enable);
++void ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode);
++void ath79_register_nfc(void);
++#else
++static inline void ath79_nfc_set_parts(struct mtd_partition *parts,
++				       int nr_parts) {}
++static inline void ath79_nfc_set_select_chip(void (*f)(int chip_no)) {}
++static inline void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd)) {}
++static inline void ath79_nfc_set_swap_dma(bool enable) {}
++static inline void ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode) {}
++static inline void ath79_register_nfc(void) {}
++#endif
++
++#endif /* _ATH79_DEV_NFC_H */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-usb.c linux-4.1.13/arch/mips/ath79/dev-usb.c
+--- linux-4.1.13.orig/arch/mips/ath79/dev-usb.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-usb.c	2015-12-04 19:57:04.478071913 +0100
+@@ -37,6 +37,8 @@
+ static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
+ 	.caps_offset		= 0x100,
+ 	.has_tt			= 1,
++	.qca_force_host_mode	= 1,
++	.qca_force_16bit_ptw	= 1,
+ };
+ 
+ static void __init ath79_usb_register(const char *name, int id,
+@@ -159,6 +161,9 @@
+ 	ath79_device_reset_clear(AR913X_RESET_USB_PHY);
+ 	mdelay(10);
+ 
++	ath79_ehci_pdata_v2.qca_force_host_mode	= 0;
++	ath79_ehci_pdata_v2.qca_force_16bit_ptw	= 0;
++
+ 	ath79_usb_register("ehci-platform", -1,
+ 			   AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
+ 			   ATH79_CPU_IRQ(3),
+@@ -182,14 +187,34 @@
+ 			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
+ 
+-static void __init ar934x_usb_setup(void)
++static void enable_tx_tx_idp_violation_fix(unsigned base)
+ {
+-	u32 bootstrap;
++	void __iomem *phy_reg;
++	u32 t;
+ 
+-	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+-	if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
++	phy_reg = ioremap(base, 4);
++	if (!phy_reg)
+ 		return;
+ 
++	t = ioread32(phy_reg);
++	t &= ~0xff;
++	t |= 0x58;
++	iowrite32(t, phy_reg);
++
++	iounmap(phy_reg);
++}
++
++static void ar934x_usb_reset_notifier(struct platform_device *pdev)
++{
++	if (pdev->id != -1)
++		return;
++
++	enable_tx_tx_idp_violation_fix(0x18116c94);
++	dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
++}
++
++static void __init ar934x_usb_setup(void)
++{
+ 	ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
+ 	udelay(1000);
+ 
+@@ -202,14 +227,64 @@
+ 	ath79_device_reset_clear(AR934X_RESET_USB_HOST);
+ 	udelay(1000);
+ 
++	if (ath79_soc_rev >= 3)
++		ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier;
++
+ 	ath79_usb_register("ehci-platform", -1,
+ 			   AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
+ 			   ATH79_CPU_IRQ(3),
+ 			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
+ 
++static void __init qca953x_usb_setup(void)
++{
++	u32 bootstrap;
++
++	bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++
++	ath79_device_reset_set(QCA953X_RESET_USBSUS_OVERRIDE);
++	udelay(1000);
++
++	ath79_device_reset_clear(QCA953X_RESET_USB_PHY);
++	udelay(1000);
++
++	ath79_device_reset_clear(QCA953X_RESET_USB_PHY_ANALOG);
++	udelay(1000);
++
++	ath79_device_reset_clear(QCA953X_RESET_USB_HOST);
++	udelay(1000);
++
++	ath79_usb_register("ehci-platform", -1,
++			   QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE,
++			   ATH79_CPU_IRQ(3),
++			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
++}
++
++static void qca955x_usb_reset_notifier(struct platform_device *pdev)
++{
++	u32 base;
++
++	switch (pdev->id) {
++	case 0:
++		base = 0x18116c94;
++		break;
++
++	case 1:
++		base = 0x18116e54;
++		break;
++
++	default:
++		return;
++	}
++
++	enable_tx_tx_idp_violation_fix(base);
++	dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
++}
++
+ static void __init qca955x_usb_setup(void)
+ {
++	ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier;
++
+ 	ath79_usb_register("ehci-platform", 0,
+ 			   QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
+ 			   ATH79_IP3_IRQ(0),
+@@ -221,6 +296,19 @@
+ 			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
+ 
++static void __init qca956x_usb_setup(void)
++{
++	ath79_usb_register("ehci-platform", 0,
++			   QCA956X_EHCI0_BASE, QCA956X_EHCI_SIZE,
++			   ATH79_IP3_IRQ(0),
++			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
++
++	ath79_usb_register("ehci-platform", 1,
++			   QCA956X_EHCI1_BASE, QCA956X_EHCI_SIZE,
++			   ATH79_IP3_IRQ(1),
++			   &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
++}
++
+ void __init ath79_register_usb(void)
+ {
+ 	if (soc_is_ar71xx())
+@@ -235,8 +323,12 @@
+ 		ar933x_usb_setup();
+ 	else if (soc_is_ar934x())
+ 		ar934x_usb_setup();
++	else if (soc_is_qca953x())
++		qca953x_usb_setup();
+ 	else if (soc_is_qca955x())
+ 		qca955x_usb_setup();
++	else if (soc_is_qca9561())
++		qca956x_usb_setup();
+ 	else
+ 		BUG();
+ }
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-wmac.c linux-4.1.13/arch/mips/ath79/dev-wmac.c
+--- linux-4.1.13.orig/arch/mips/ath79/dev-wmac.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-wmac.c	2015-12-04 19:57:04.506070082 +0100
+@@ -15,14 +15,21 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/irq.h>
++#include <linux/etherdevice.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/gpio.h>
+ 
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
++#include "common.h"
+ #include "dev-wmac.h"
+ 
+-static struct ath9k_platform_data ath79_wmac_data;
++static u8 ath79_wmac_mac[ETH_ALEN];
++
++static struct ath9k_platform_data ath79_wmac_data = {
++	.led_pin = -1,
++};
+ 
+ static struct resource ath79_wmac_resources[] = {
+ 	{
+@@ -44,7 +51,7 @@
+ 	},
+ };
+ 
+-static void __init ar913x_wmac_setup(void)
++static int ar913x_wmac_reset(void)
+ {
+ 	/* reset the WMAC */
+ 	ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
+@@ -53,22 +60,48 @@
+ 	ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
+ 	mdelay(10);
+ 
++	return 0;
++}
++
++static void __init ar913x_wmac_setup(void)
++{
++	ar913x_wmac_reset();
++
+ 	ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+ 	ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+ 	ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
+ 	ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
++
++	ath79_wmac_data.external_reset = ar913x_wmac_reset;
+ }
+ 
+ 
+ static int ar933x_wmac_reset(void)
+ {
++	int retries = 20;
++
+ 	ath79_device_reset_set(AR933X_RESET_WMAC);
+ 	ath79_device_reset_clear(AR933X_RESET_WMAC);
+ 
+-	return 0;
++	while (1) {
++		u32 bootstrap;
++
++		bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++		if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
++			return 0;
++
++		if (retries-- == 0)
++			break;
++
++		udelay(10000);
++		retries++;
++	}
++
++	pr_err("ar933x: WMAC reset timed out");
++	return -ETIMEDOUT;
+ }
+ 
+-static int ar933x_r1_get_wmac_revision(void)
++static int ar93xx_get_soc_revision(void)
+ {
+ 	return ath79_soc_rev;
+ }
+@@ -93,7 +126,7 @@
+ 		ath79_wmac_data.is_clk_25mhz = true;
+ 
+ 	if (ath79_soc_rev == 1)
+-		ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
++		ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+ 
+ 	ath79_wmac_data.external_reset = ar933x_wmac_reset;
+ }
+@@ -114,6 +147,28 @@
+ 		ath79_wmac_data.is_clk_25mhz = false;
+ 	else
+ 		ath79_wmac_data.is_clk_25mhz = true;
++
++	ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
++}
++
++static void qca953x_wmac_setup(void)
++{
++	u32 t;
++
++	ath79_wmac_device.name = "qca953x_wmac";
++
++	ath79_wmac_resources[0].start = QCA953X_WMAC_BASE;
++	ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1;
++	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
++
++	t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++	if (t & QCA953X_BOOTSTRAP_REF_CLK_40)
++		ath79_wmac_data.is_clk_25mhz = false;
++	else
++		ath79_wmac_data.is_clk_25mhz = true;
++
++	ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+ }
+ 
+ static void qca955x_wmac_setup(void)
+@@ -134,7 +189,221 @@
+ 		ath79_wmac_data.is_clk_25mhz = true;
+ }
+ 
+-void __init ath79_register_wmac(u8 *cal_data)
++static void qca956x_wmac_setup(void)
++{
++	u32 t;
++
++	ath79_wmac_device.name = "qca956x_wmac";
++
++	ath79_wmac_resources[0].start = QCA956X_WMAC_BASE;
++	ath79_wmac_resources[0].end = QCA956X_WMAC_BASE + QCA956X_WMAC_SIZE - 1;
++	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
++
++	t = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
++	if (t & QCA956X_BOOTSTRAP_REF_CLK_40)
++		ath79_wmac_data.is_clk_25mhz = false;
++	else
++		ath79_wmac_data.is_clk_25mhz = true;
++}
++
++static bool __init
++ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
++{
++	int timeout = 1000;
++	u32 val;
++
++	__raw_readl(base + AR9300_OTP_BASE + (4 * addr));
++	while (timeout--) {
++		val = __raw_readl(base + AR9300_OTP_STATUS);
++		if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
++			break;
++
++		udelay(10);
++	}
++
++	if (!timeout)
++		return false;
++
++	*data = __raw_readl(base + AR9300_OTP_READ_DATA);
++	return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
++{
++	u32 data;
++	int i;
++
++	for (i = 0; i < len; i++) {
++		int offset = 8 * ((addr - i) % 4);
++
++		if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
++			return false;
++
++		dest[i] = (data >> offset) & 0xff;
++	}
++
++	return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
++			   int dest_start, int dest_len)
++{
++	int dest_bytes = 0;
++	int offset = 0;
++	int end = addr - len;
++	u8 hdr[2];
++
++	while (addr > end) {
++		if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
++			return false;
++
++		addr -= 2;
++		offset += hdr[0];
++
++		if (offset <= dest_start + dest_len &&
++		    offset + len >= dest_start) {
++			int data_offset = 0;
++			int dest_offset = 0;
++			int copy_len;
++
++			if (offset < dest_start)
++				data_offset = dest_start - offset;
++			else
++				dest_offset = offset - dest_start;
++
++			copy_len = len - data_offset;
++			if (copy_len > dest_len - dest_offset)
++				copy_len = dest_len - dest_offset;
++
++			ar93xx_wmac_otp_read(base, addr - data_offset,
++					     dest + dest_offset,
++					     copy_len);
++
++			dest_bytes += copy_len;
++		}
++		addr -= hdr[1];
++	}
++	return !!dest_bytes;
++}
++
++bool __init ar93xx_wmac_read_mac_address(u8 *dest)
++{
++	void __iomem *base;
++	bool ret = false;
++	int addr = 0x1ff;
++	unsigned int len;
++	u32 hdr_u32;
++	u8 *hdr = (u8 *) &hdr_u32;
++	u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
++	int mac_start = 2, mac_end = 8;
++
++	BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
++	base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE);
++	while (addr > sizeof(hdr)) {
++		if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr)))
++			break;
++
++		if (hdr_u32 == 0 || hdr_u32 == ~0)
++			break;
++
++		len = (hdr[1] << 4) | (hdr[2] >> 4);
++		addr -= 4;
++
++		switch (hdr[0] >> 5) {
++		case 0:
++			if (len < mac_end)
++				break;
++
++			ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
++			ret = true;
++			break;
++		case 3:
++			ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
++							  mac_start, 6);
++			break;
++		default:
++			break;
++		}
++
++		addr -= len + 2;
++	}
++
++	iounmap(base);
++	if (ret)
++		memcpy(dest, mac, 6);
++
++	return ret;
++}
++
++void __init ath79_wmac_disable_2ghz(void)
++{
++	ath79_wmac_data.disable_2ghz = true;
++}
++
++void __init ath79_wmac_disable_5ghz(void)
++{
++	ath79_wmac_data.disable_5ghz = true;
++}
++
++void __init ath79_wmac_set_tx_gain_buffalo(void)
++{
++	ath79_wmac_data.tx_gain_buffalo = true;
++}
++
++static int ath79_request_ext_lna_gpio(unsigned chain, int gpio)
++{
++	char buf[32];
++	char *label;
++	int err;
++
++	scnprintf(buf, sizeof(buf), "external LNA%u", chain);
++	label = kstrdup(buf, GFP_KERNEL);
++
++	err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label);
++	if (err) {
++		pr_err("unable to request GPIO%d for external LNA%u\n",
++			gpio, chain);
++		kfree(label);
++	}
++
++	return err;
++}
++
++static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio)
++{
++	unsigned int sel;
++	int err;
++
++	if (WARN_ON(chain > 1))
++		return;
++
++	err = ath79_request_ext_lna_gpio(chain, gpio);
++	if (err)
++		return;
++
++	if (chain == 0)
++		sel = AR934X_GPIO_OUT_EXT_LNA0;
++	else
++		sel = AR934X_GPIO_OUT_EXT_LNA1;
++
++	ath79_gpio_output_select(gpio, sel);
++}
++
++void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio)
++{
++	if (soc_is_ar934x())
++		ar934x_set_ext_lna_gpio(chain, gpio);
++}
++
++void __init ath79_wmac_set_led_pin(int gpio)
++{
++	ath79_wmac_data.led_pin = gpio;
++}
++
++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ 	if (soc_is_ar913x())
+ 		ar913x_wmac_setup();
+@@ -142,8 +411,12 @@
+ 		ar933x_wmac_setup();
+ 	else if (soc_is_ar934x())
+ 		ar934x_wmac_setup();
++	else if (soc_is_qca953x())
++		qca953x_wmac_setup();
+ 	else if (soc_is_qca955x())
+ 		qca955x_wmac_setup();
++	else if (soc_is_qca956x())
++		qca956x_wmac_setup();
+ 	else
+ 		BUG();
+ 
+@@ -151,5 +424,16 @@
+ 		memcpy(ath79_wmac_data.eeprom_data, cal_data,
+ 		       sizeof(ath79_wmac_data.eeprom_data));
+ 
++	if (mac_addr) {
++		memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
++		ath79_wmac_data.macaddr = ath79_wmac_mac;
++	}
++
+ 	platform_device_register(&ath79_wmac_device);
+ }
++
++void __init ath79_register_wmac_simple(void)
++{
++	ath79_register_wmac(NULL, NULL);
++	ath79_wmac_data.eeprom_name = "soc_wmac.eeprom";
++}
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/dev-wmac.h linux-4.1.13/arch/mips/ath79/dev-wmac.h
+--- linux-4.1.13.orig/arch/mips/ath79/dev-wmac.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/dev-wmac.h	2015-12-04 19:57:04.510069820 +0100
+@@ -12,6 +12,14 @@
+ #ifndef _ATH79_DEV_WMAC_H
+ #define _ATH79_DEV_WMAC_H
+ 
+-void ath79_register_wmac(u8 *cal_data);
++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
++void ath79_register_wmac_simple(void);
++void ath79_wmac_disable_2ghz(void);
++void ath79_wmac_disable_5ghz(void);
++void ath79_wmac_set_tx_gain_buffalo(void);
++void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio);
++void ath79_wmac_set_led_pin(int gpio);
++
++bool ar93xx_wmac_read_mac_address(u8 *dest);
+ 
+ #endif /* _ATH79_DEV_WMAC_H */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/early_printk.c linux-4.1.13/arch/mips/ath79/early_printk.c
+--- linux-4.1.13.orig/arch/mips/ath79/early_printk.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/early_printk.c	2015-12-04 19:57:04.478071913 +0100
+@@ -56,6 +56,46 @@
+ 	/* nothing to do */
+ }
+ 
++static void prom_enable_uart(u32 id)
++{
++	void __iomem *gpio_base;
++	u32 uart_en;
++	u32 t;
++
++	switch (id) {
++	case REV_ID_MAJOR_AR71XX:
++		uart_en = AR71XX_GPIO_FUNC_UART_EN;
++		break;
++
++	case REV_ID_MAJOR_AR7240:
++	case REV_ID_MAJOR_AR7241:
++	case REV_ID_MAJOR_AR7242:
++		uart_en = AR724X_GPIO_FUNC_UART_EN;
++		break;
++
++	case REV_ID_MAJOR_AR913X:
++		uart_en = AR913X_GPIO_FUNC_UART_EN;
++		break;
++
++	case REV_ID_MAJOR_AR9330:
++	case REV_ID_MAJOR_AR9331:
++		uart_en = AR933X_GPIO_FUNC_UART_EN;
++		break;
++
++	case REV_ID_MAJOR_AR9341:
++	case REV_ID_MAJOR_AR9342:
++	case REV_ID_MAJOR_AR9344:
++		/* TODO */
++	default:
++		return;
++	}
++
++	gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
++	t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
++	t |= uart_en;
++	__raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
++}
++
+ static void prom_putchar_init(void)
+ {
+ 	void __iomem *base;
+@@ -74,8 +114,12 @@
+ 	case REV_ID_MAJOR_AR9341:
+ 	case REV_ID_MAJOR_AR9342:
+ 	case REV_ID_MAJOR_AR9344:
++	case REV_ID_MAJOR_QCA9533:
++	case REV_ID_MAJOR_QCA9533_V2:
+ 	case REV_ID_MAJOR_QCA9556:
+ 	case REV_ID_MAJOR_QCA9558:
++	case REV_ID_MAJOR_TP9343:
++	case REV_ID_MAJOR_QCA9561:
+ 		_prom_putchar = prom_putchar_ar71xx;
+ 		break;
+ 
+@@ -86,8 +130,10 @@
+ 
+ 	default:
+ 		_prom_putchar = prom_putchar_dummy;
+-		break;
++		return;
+ 	}
++
++	prom_enable_uart(id);
+ }
+ 
+ void prom_putchar(unsigned char ch)
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/gpio.c linux-4.1.13/arch/mips/ath79/gpio.c
+--- linux-4.1.13.orig/arch/mips/ath79/gpio.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/gpio.c	2015-12-04 19:57:05.893979276 +0100
+@@ -20,15 +20,29 @@
+ #include <linux/io.h>
+ #include <linux/ioport.h>
+ #include <linux/gpio.h>
++#include <linux/irq.h>
++#include <linux/interrupt.h>
++
++#include <linux/of.h>
+ 
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/irq.h>
+ #include "common.h"
+ 
+-static void __iomem *ath79_gpio_base;
++void __iomem *ath79_gpio_base;
++EXPORT_SYMBOL_GPL(ath79_gpio_base);
++
+ static unsigned long ath79_gpio_count;
+ static DEFINE_SPINLOCK(ath79_gpio_lock);
+ 
++/*
++ * gpio_both_edge is a bitmask of which gpio pins need to have
++ * the detect priority flipped from the interrupt handler to
++ * emulate IRQ_TYPE_EDGE_BOTH.
++ */
++static unsigned long gpio_both_edge = 0;
++
+ static void __ath79_gpio_set_value(unsigned gpio, int value)
+ {
+ 	void __iomem *base = ath79_gpio_base;
+@@ -128,6 +142,30 @@
+ 	return 0;
+ }
+ 
++int ath79_gpio_direction_select(unsigned gpio, bool oe)
++{
++	void __iomem *base = ath79_gpio_base;
++	unsigned long flags;
++	bool ieq_1 = (soc_is_ar934x() ||
++			soc_is_qca953x());
++
++	if (gpio >= ath79_gpio_count)
++		return -1;
++
++	spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++	if ((ieq_1 && oe) || (!ieq_1 && !oe))
++		__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << gpio),
++				base + AR71XX_GPIO_REG_OE);
++	else
++		__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << gpio),
++				base + AR71XX_GPIO_REG_OE);
++
++	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++
++	return 0;
++}
++
+ static struct gpio_chip ath79_gpio_chip = {
+ 	.label			= "ath79",
+ 	.get			= ath79_gpio_get_value,
+@@ -146,7 +184,8 @@
+ 	    soc_is_ar913x() ||
+ 	    soc_is_ar933x())
+ 		reg = AR71XX_GPIO_REG_FUNC;
+-	else if (soc_is_ar934x())
++	else if (soc_is_ar934x() ||
++		 soc_is_qca953x() || soc_is_qca956x())
+ 		reg = AR934X_GPIO_REG_FUNC;
+ 	else
+ 		BUG();
+@@ -154,6 +193,36 @@
+ 	return ath79_gpio_base + reg;
+ }
+ 
++static void __iomem *ath79_gpio_get_function2_reg(void)
++{
++	u32 reg = 0;
++
++	if (soc_is_ar71xx() ||
++	    soc_is_ar724x() ||
++	    soc_is_ar913x() ||
++	    soc_is_ar933x())
++		reg = AR71XX_GPIO_REG_FUNC_2;
++	else
++		BUG();
++
++	return ath79_gpio_base + reg;
++}
++
++
++void ath79_gpio_function2_setup(u32 set, u32 clear)
++{
++	void __iomem *reg = ath79_gpio_get_function2_reg();
++	unsigned long flags;
++
++	spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++	__raw_writel((__raw_readl(reg) & ~clear) | set, reg);
++	/* flush write */
++	__raw_readl(reg);
++
++	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++}
++
+ void ath79_gpio_function_setup(u32 set, u32 clear)
+ {
+ 	void __iomem *reg = ath79_gpio_get_function_reg();
+@@ -178,6 +247,172 @@
+ 	ath79_gpio_function_setup(0, mask);
+ }
+ 
++void __init ath79_gpio_output_select(unsigned gpio, u8 val)
++{
++	void __iomem *base = ath79_gpio_base;
++	unsigned long flags;
++	unsigned int reg, reg_base;
++	unsigned long gpio_count;
++	u32 t, s;
++
++	if (soc_is_ar934x()) {
++		gpio_count = AR934X_GPIO_COUNT;
++		reg_base = AR934X_GPIO_REG_OUT_FUNC0;
++	} else if (soc_is_qca953x()) {
++		gpio_count = QCA953X_GPIO_COUNT;
++		reg_base = QCA953X_GPIO_REG_OUT_FUNC0;
++	} else if (soc_is_qca955x()) {
++		gpio_count = QCA955X_GPIO_COUNT;
++		reg_base = QCA955X_GPIO_REG_OUT_FUNC0;
++	} else {
++		BUG();
++	}
++
++	if (gpio >= gpio_count)
++		return;
++
++	reg = reg_base + 4 * (gpio / 4);
++	s = 8 * (gpio % 4);
++
++	spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++	t = __raw_readl(base + reg);
++	t &= ~(0xff << s);
++	t |= val << s;
++	__raw_writel(t, base + reg);
++
++	/* flush write */
++	(void) __raw_readl(base + reg);
++
++	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++}
++
++static int ath79_gpio_irq_type(struct irq_data *d, unsigned type)
++{
++	int offset = d->irq - ATH79_GPIO_IRQ_BASE;
++	void __iomem *base = ath79_gpio_base;
++	unsigned long flags;
++	unsigned long int_type;
++	unsigned long int_polarity;
++	unsigned long bit = (1 << offset);
++
++	spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++	int_type = __raw_readl(base + AR71XX_GPIO_REG_INT_TYPE);
++	int_polarity = __raw_readl(base + AR71XX_GPIO_REG_INT_POLARITY);
++
++	gpio_both_edge &= ~bit;
++
++	switch (type) {
++	case IRQ_TYPE_EDGE_RISING:
++		int_type &= ~bit;
++		int_polarity |= bit;
++		break;
++
++	case IRQ_TYPE_EDGE_FALLING:
++		int_type &= ~bit;
++		int_polarity &= ~bit;
++		break;
++
++	case IRQ_TYPE_LEVEL_HIGH:
++		int_type |= bit;
++		int_polarity |= bit;
++		break;
++
++	case IRQ_TYPE_LEVEL_LOW:
++		int_type |= bit;
++		int_polarity &= ~bit;
++		break;
++
++	case IRQ_TYPE_EDGE_BOTH:
++		int_type |= bit;
++		/* set polarity based on current value */
++		if (gpio_get_value(offset)) {
++			int_polarity &= ~bit;
++		} else {
++			int_polarity |= bit;
++		}
++		/* flip this gpio in the interrupt handler */
++		gpio_both_edge |= bit;
++		break;
++
++	default:
++		spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++		return -EINVAL;
++	}
++
++	__raw_writel(int_type, base + AR71XX_GPIO_REG_INT_TYPE);
++	__raw_writel(int_polarity, base + AR71XX_GPIO_REG_INT_POLARITY);
++
++	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_INT_MODE) | (1 << offset),
++		     base + AR71XX_GPIO_REG_INT_MODE);
++
++	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE) & ~(1 << offset),
++		     base + AR71XX_GPIO_REG_INT_ENABLE);
++
++	spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++	return 0;
++}
++
++static void ath79_gpio_irq_enable(struct irq_data *d)
++{
++	int offset = d->irq - ATH79_GPIO_IRQ_BASE;
++	void __iomem *base = ath79_gpio_base;
++
++	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE) | (1 << offset),
++		     base + AR71XX_GPIO_REG_INT_ENABLE);
++}
++
++static void ath79_gpio_irq_disable(struct irq_data *d)
++{
++	int offset = d->irq - ATH79_GPIO_IRQ_BASE;
++	void __iomem *base = ath79_gpio_base;
++
++	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_INT_ENABLE) & ~(1 << offset),
++		     base + AR71XX_GPIO_REG_INT_ENABLE);
++}
++
++static struct irq_chip ath79_gpio_irqchip = {
++	.name = "GPIO",
++	.irq_enable = ath79_gpio_irq_enable,
++	.irq_disable = ath79_gpio_irq_disable,
++	.irq_set_type = ath79_gpio_irq_type,
++};
++
++static irqreturn_t ath79_gpio_irq(int irq, void *dev)
++{
++	void __iomem *base = ath79_gpio_base;
++	unsigned long stat = __raw_readl(base + AR71XX_GPIO_REG_INT_PENDING);
++	int bit_num;
++
++	for_each_set_bit(bit_num, &stat, sizeof(stat) * BITS_PER_BYTE) {
++		unsigned long bit = BIT(bit_num);
++
++		if (bit & gpio_both_edge) {
++			__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_INT_POLARITY) ^ bit,
++				base + AR71XX_GPIO_REG_INT_POLARITY);
++		}
++
++		generic_handle_irq(ATH79_GPIO_IRQ(bit_num));
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int __init ath79_gpio_irq_init(struct gpio_chip *chip)
++{
++	int irq;
++	int irq_base = ATH79_GPIO_IRQ_BASE;
++
++	for (irq = irq_base; irq < irq_base + chip->ngpio; irq++) {
++		irq_set_chip_data(irq, chip);
++		irq_set_chip_and_handler(irq, &ath79_gpio_irqchip, handle_simple_irq);
++		irq_set_noprobe(irq);
++	}
++
++	return 0;
++}
++
+ void __init ath79_gpio_init(void)
+ {
+ 	int err;
+@@ -194,14 +429,19 @@
+ 		ath79_gpio_count = AR933X_GPIO_COUNT;
+ 	else if (soc_is_ar934x())
+ 		ath79_gpio_count = AR934X_GPIO_COUNT;
++	else if (soc_is_qca953x())
++		ath79_gpio_count = QCA953X_GPIO_COUNT;
+ 	else if (soc_is_qca955x())
+ 		ath79_gpio_count = QCA955X_GPIO_COUNT;
++	else if (soc_is_qca956x())
++		ath79_gpio_count = QCA956X_GPIO_COUNT;
+ 	else
+ 		BUG();
+ 
+ 	ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ 	ath79_gpio_chip.ngpio = ath79_gpio_count;
+-	if (soc_is_ar934x() || soc_is_qca955x()) {
++	if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x() ||
++	    soc_is_qca956x()) {
+ 		ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
+ 		ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
+ 	}
+@@ -209,6 +449,10 @@
+ 	err = gpiochip_add(&ath79_gpio_chip);
+ 	if (err)
+ 		panic("cannot add AR71xx GPIO chip, error=%d", err);
++
++	ath79_gpio_irq_init(&ath79_gpio_chip);
++
++	request_irq(ATH79_MISC_IRQ(2), ath79_gpio_irq, 0, "ath79-gpio", NULL);
+ }
+ 
+ int gpio_get_value(unsigned gpio)
+@@ -231,14 +475,22 @@
+ 
+ int gpio_to_irq(unsigned gpio)
+ {
+-	/* FIXME */
+-	return -EINVAL;
++	if (gpio > ath79_gpio_count) {
++		return -EINVAL;
++	}
++
++	return ATH79_GPIO_IRQ_BASE + gpio;
+ }
+ EXPORT_SYMBOL(gpio_to_irq);
+ 
+ int irq_to_gpio(unsigned irq)
+ {
+-	/* FIXME */
+-	return -EINVAL;
++	unsigned gpio = irq - ATH79_GPIO_IRQ_BASE;
++
++	if (gpio > ath79_gpio_count) {
++		return -EINVAL;
++	}
++
++	return gpio;
+ }
+ EXPORT_SYMBOL(irq_to_gpio);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/irq.c linux-4.1.13/arch/mips/ath79/irq.c
+--- linux-4.1.13.orig/arch/mips/ath79/irq.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/irq.c	2015-12-04 19:57:04.498070605 +0100
+@@ -26,6 +26,8 @@
+ 
+ static void (*ath79_ip2_handler)(void);
+ static void (*ath79_ip3_handler)(void);
++static struct irq_chip ip2_chip;
++static struct irq_chip ip3_chip;
+ 
+ static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
+ {
+@@ -106,7 +108,9 @@
+ 	else if (soc_is_ar724x() ||
+ 		 soc_is_ar933x() ||
+ 		 soc_is_ar934x() ||
+-		 soc_is_qca955x())
++		 soc_is_qca953x() ||
++		 soc_is_qca955x() ||
++		 soc_is_qca956x())
+ 		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+ 	else
+ 		BUG();
+@@ -147,12 +151,43 @@
+ 
+ 	for (i = ATH79_IP2_IRQ_BASE;
+ 	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+-		irq_set_chip_and_handler(i, &dummy_irq_chip,
+-					 handle_level_irq);
++		irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
+ 
+ 	irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
+ }
+ 
++static void qca953x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
++{
++	u32 status;
++
++	disable_irq_nosync(irq);
++
++	status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS);
++
++	if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) {
++		ath79_ddr_wb_flush(QCA953X_DDR_REG_FLUSH_PCIE);
++		generic_handle_irq(ATH79_IP2_IRQ(0));
++	} else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) {
++		ath79_ddr_wb_flush(QCA953X_DDR_REG_FLUSH_WMAC);
++		generic_handle_irq(ATH79_IP2_IRQ(1));
++	} else {
++		spurious_interrupt();
++	}
++
++	enable_irq(irq);
++}
++
++static void qca953x_irq_init(void)
++{
++	int i;
++
++	for (i = ATH79_IP2_IRQ_BASE;
++	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
++		irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
++
++	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch);
++}
++
+ static void qca955x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+ {
+ 	u32 status;
+@@ -222,19 +257,108 @@
+ 
+ 	for (i = ATH79_IP2_IRQ_BASE;
+ 	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+-		irq_set_chip_and_handler(i, &dummy_irq_chip,
+-					 handle_level_irq);
++		irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
+ 
+ 	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
+ 
+ 	for (i = ATH79_IP3_IRQ_BASE;
+ 	     i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
+-		irq_set_chip_and_handler(i, &dummy_irq_chip,
+-					 handle_level_irq);
++		irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
+ 
+ 	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
+ }
+ 
++static void qca956x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
++{
++	u32 status;
++
++	disable_irq_nosync(irq);
++
++	status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
++	status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL;
++
++	if (status == 0) {
++		spurious_interrupt();
++		goto enable;
++	}
++
++	if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) {
++		/* TODO: flush DDR? */
++		generic_handle_irq(ATH79_IP2_IRQ(0));
++	}
++
++	if (status & QCA956X_EXT_INT_WMAC_ALL) {
++		/* TODO: flsuh DDR? */
++		generic_handle_irq(ATH79_IP2_IRQ(1));
++	}
++
++enable:
++	enable_irq(irq);
++}
++
++static void qca956x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc)
++{
++	u32 status;
++
++	disable_irq_nosync(irq);
++
++	status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
++	status &= QCA956X_EXT_INT_PCIE_RC2_ALL |
++		  QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2;
++
++	if (status == 0) {
++		spurious_interrupt();
++		goto enable;
++	}
++
++	if (status & QCA956X_EXT_INT_USB1) {
++		/* TODO: flush DDR? */
++		generic_handle_irq(ATH79_IP3_IRQ(0));
++	}
++
++	if (status & QCA956X_EXT_INT_USB2) {
++		/* TODO: flush DDR? */
++		generic_handle_irq(ATH79_IP3_IRQ(1));
++	}
++
++	if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) {
++		/* TODO: flush DDR? */
++		generic_handle_irq(ATH79_IP3_IRQ(2));
++	}
++
++enable:
++	enable_irq(irq);
++}
++
++static void qca956x_enable_timer_cb(void) {
++	u32 misc;
++
++	misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
++	misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
++	ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc);
++}
++
++static void qca956x_irq_init(void)
++{
++	int i;
++
++	for (i = ATH79_IP2_IRQ_BASE;
++	     i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
++		irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
++
++	irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
++
++	for (i = ATH79_IP3_IRQ_BASE;
++	     i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
++		irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
++
++	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
++
++	/* QCA956x timer init workaround has to be applied right before setting
++	 * up the clock. Else, there will be no jiffies */
++	late_time_init = &qca956x_enable_timer_cb;
++}
++
+ asmlinkage void plat_irq_dispatch(void)
+ {
+ 	unsigned long pending;
+@@ -335,8 +459,41 @@
+ 	do_IRQ(ATH79_CPU_IRQ(3));
+ }
+ 
++static void qca953x_ip3_handler(void)
++{
++	ath79_ddr_wb_flush(QCA953X_DDR_REG_FLUSH_USB);
++	do_IRQ(ATH79_CPU_IRQ(3));
++}
++
++static void ath79_ip2_disable(struct irq_data *data)
++{
++	disable_irq(ATH79_CPU_IRQ(2));
++}
++
++static void ath79_ip2_enable(struct irq_data *data)
++{
++	enable_irq(ATH79_CPU_IRQ(2));
++}
++
++static void ath79_ip3_disable(struct irq_data *data)
++{
++	disable_irq(ATH79_CPU_IRQ(3));
++}
++
++static void ath79_ip3_enable(struct irq_data *data)
++{
++	enable_irq(ATH79_CPU_IRQ(3));
++}
++
+ void __init arch_init_irq(void)
+ {
++	ip2_chip = dummy_irq_chip;
++	ip3_chip = dummy_irq_chip;
++	ip2_chip.irq_disable = ath79_ip2_disable;
++	ip2_chip.irq_enable = ath79_ip2_enable;
++	ip3_chip.irq_disable = ath79_ip3_disable;
++	ip3_chip.irq_enable = ath79_ip3_enable;
++
+ 	if (soc_is_ar71xx()) {
+ 		ath79_ip2_handler = ar71xx_ip2_handler;
+ 		ath79_ip3_handler = ar71xx_ip3_handler;
+@@ -352,9 +509,15 @@
+ 	} else if (soc_is_ar934x()) {
+ 		ath79_ip2_handler = ath79_default_ip2_handler;
+ 		ath79_ip3_handler = ar934x_ip3_handler;
++	} else if (soc_is_qca953x()) {
++		ath79_ip2_handler = ath79_default_ip2_handler;
++		ath79_ip3_handler = qca953x_ip3_handler;
+ 	} else if (soc_is_qca955x()) {
+ 		ath79_ip2_handler = ath79_default_ip2_handler;
+ 		ath79_ip3_handler = ath79_default_ip3_handler;
++	} else if (soc_is_qca956x()) {
++		ath79_ip2_handler = ath79_default_ip2_handler;
++		ath79_ip3_handler = ath79_default_ip3_handler;
+ 	} else {
+ 		BUG();
+ 	}
+@@ -364,6 +527,10 @@
+ 
+ 	if (soc_is_ar934x())
+ 		ar934x_ip2_irq_init();
++	else if (soc_is_qca953x())
++		qca953x_irq_init();
+ 	else if (soc_is_qca955x())
+ 		qca955x_irq_init();
++	else if (soc_is_qca956x())
++		qca956x_irq_init();
+ }
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/Kconfig linux-4.1.13/arch/mips/ath79/Kconfig
+--- linux-4.1.13.orig/arch/mips/ath79/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/Kconfig	2015-12-04 19:57:05.957975089 +0100
+@@ -2,75 +2,1466 @@
+ 
+ menu "Atheros AR71XX/AR724X/AR913X machine selection"
+ 
++config ATH79_MACH_ALFA_AP96
++	bool "ALFA Network AP96 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_HORNET_UB
++	bool "ALFA Network Hornet-UB board support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_ALFA_NX
++	bool "ALFA Network N2/N5 board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_TUBE2H
++	bool "ALFA Network Tube2H board support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_ALL0258N
++	bool "Allnet ALL0258N support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_ALL0315N
++	bool "Allnet ALL0315N support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_ANTMINER_S1
++	bool "Bitmain Antminer S1 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_ANTMINER_S3
++	bool "Bitmain Antminer S3 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_ARDUINO_YUN
++	bool "Arduino Yun"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Arduino Yun.
++
++config ATH79_MACH_AP113
++	bool "Atheros AP113 board support"
++	select SOC_AR724X
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_PB9X_PCI if PCI
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_USB
++	select ATH79_DEV_ETH
++
+ config ATH79_MACH_AP121
+ 	bool "Atheros AP121 reference board"
+ 	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros AP121 reference board.
++
++config ATH79_MACH_AP132
++	bool "Atheros AP132 reference board"
++	select SOC_QCA955X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros AP132 reference boards.
++
++config ATH79_MACH_AP136
++	bool "Atheros AP136/AP135 reference board"
++	select SOC_QCA955X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_NFC
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros AP136 or AP135 reference boards.
++
++config ATH79_MACH_AP143
++	bool "Atheros AP143 reference board"
++	select SOC_QCA953X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_SPI
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_ETH
++	select ATH79_DEV_M25P80
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros AP143 reference board.
++
++config ATH79_MACH_AP147
++	bool "Atheros AP147 reference board"
++	select SOC_QCA953X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_AP9X_PCI if PCI
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  QCA AP147 reference boards.
++
++config ATH79_MACH_AP152
++	bool "Atheros AP152 reference board"
++	select SOC_QCA956X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_AP9X_PCI if PCI
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  QCA AP152 reference boards.
++
++
++config ATH79_MACH_AP81
++	bool "Atheros AP81 reference board"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros AP81 reference board.
++
++config ATH79_MACH_AP83
++	bool "Atheros AP83 board support"
++	select SOC_AR913X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_AP96
++	bool "Atheros AP96 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_DB120
++	bool "Atheros DB120 reference board"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros DB120 reference board.
++
++config ATH79_MACH_PB42
++	bool "Atheros PB42 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_PB44
++	bool "Atheros PB44 reference board"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_SPI
++	select ATH79_DEV_USB
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Atheros PB44 reference board.
++
++config ATH79_MACH_PB92
++	bool "Atheros PB92 board support"
++	select SOC_AR724X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_PB9X_PCI if PCI
++	select ATH79_DEV_USB
++
++config ATH79_MACH_AW_NR580
++	bool "AzureWave AW-NR580 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_F9K1115V2
++	bool "Belkin AC1750DB board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_EPG5000
++	bool "EnGenius EPG5000 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_ESR1750
++	bool "EnGenius ESR1750 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WHR_HP_G300N
++	bool "Buffalo WHR-HP-G300N board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_WLAE_AG300N
++	bool "Buffalo WLAE-AG300N board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_WLR8100
++	bool "Sitecom WLR-8100 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WZR_HP_AG300H
++	bool "Buffalo WZR-HP-AG300H board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G300NH
++	bool "Buffalo WZR-HP-G300NH board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select RTL8366_SMI
++
++config ATH79_MACH_WZR_HP_G300NH2
++	bool "Buffalo WZR-HP-G300NH2 board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G450H
++	bool "Buffalo WZR-HP-G450H board support"
++	select SOC_AR724X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_450HP2
++	bool "Buffalo WZR-450HP2 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WP543
++	bool "Compex WP543/WPJ543 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select MYLOADER
++
++config ATH79_MACH_WPE72
++	bool "Compex WPE72/WPE72NX board support"
++	select SOC_AR724X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select MYLOADER
++
++config ATH79_MACH_WPJ344
++	bool "Compex WPJ344 board support"
++	select SOC_AS934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WPJ531
++       bool "Compex WPJ531 board support"
++       select SOC_QCA953X
++       select ATH79_DEV_ETH
++       select ATH79_DEV_GPIO_BUTTONS
++       select ATH79_DEV_LEDS_GPIO
++       select ATH79_DEV_M25P80
++       select ATH79_DEV_USB
++       select ATH79_DEV_WMAC
++
++config ATH79_MACH_WPJ558
++	bool "Compex WPJ558 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_DGL_5500_A1
++	bool "D-Link DGL-5500 A1 support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_USB
++
++config ATH79_MACH_DHP_1565_A1
++	bool "D-Link DHP-1565 rev. A1 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_DIR_505_A1
++	bool "D-Link DIR-505-A1 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_DIR_600_A1
++	bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_NVRAM
++
++config ATH79_MACH_DIR_615_C1
++	bool "D-Link DIR-615 rev. C1 support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_DIR_615_I1
++	bool "D-Link DIR-615 rev. I1 support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_DIR_825_B1
++	bool "D-Link DIR-825 rev. B1 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_DIR_825_C1
++	bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_DLAN_HOTSPOT
++	bool "devolo dLAN Hotspot support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_DLAN_PRO_500_WP
++	bool "devolo dLAN pro 500 Wireless+ support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_USB
++
++config ATH79_MACH_DLAN_PRO_1200_AC
++	bool "devolo dLAN pro 1200+ WiFi ac support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++
++config ATH79_MACH_DRAGINO2
++	bool "DRAGINO V2 support"
++	select SOC_AR933X
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_ETH
++	select ATH79_DEV_USB
++
++config ATH79_MACH_ESR900
++	bool "EnGenius ESR900 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_EW_DORIN
++	bool "embedded wireless Dorin Platform support"
++	select SOC_AR933X
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_ETH
++	help
++	  Say 'Y' here if you want your kernel to support the
++	  Dorin Platform from www.80211.de .
++
++config ATH79_MACH_EL_M150
++	bool "EasyLink EL-M150 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_EL_MINI
++	bool "EasyLink EL-MINI support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_GL_AR150
++	bool "GL AR150 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_GL_AR300
++	bool "GL_AR300 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_GL_DOMINO
++	bool "DOMINO support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_GL_INET
++	bool "GL-INET support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_EAP300V2
++	bool "EnGenius EAP300 v2 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_GS_MINIBOX_V1
++	bool "Gainstrong MiniBox V1.0 support"
++	select SOC_AR933X
++	select ARH79_DEV_ETH
++	select ARH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_GS_OOLITE
++       bool "GS Oolite V1 support"
++       select SOC_AR933X
++       select ARH79_DEV_ETH
++       select ARH79_DEV_GPIO_BUTTONS
++       select ATH79_DEV_LEDS_GPIO
++       select ATH79_DEV_M25P80
++       select ATH79_DEV_USB
++       select ATH79_DEV_WMAC
++
++config ATH79_MACH_HIWIFI_HC6361
++	bool "HiWiFi HC6361 board support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_JA76PF
++	bool "jjPlus JA76PF board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_JWAP003
++	bool "jjPlus JWAP003 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WRT160NL
++	bool "Linksys WRT160NL board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_WRT400N
++	bool "Linksys WRT400N board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_R6100
++	bool "NETGEAR R6100 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MC_MAC1200R
++	bool "MERCURY MAC1200R board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_RB4XX
++	bool "MikroTik RouterBOARD 4xx series support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_USB
++
++config ATH79_MACH_RB750
++	bool "MikroTik RouterBOARD 750 support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_USB
++	select ATH79_ROUTERBOOT
++
++config ATH79_MACH_RB91X
++	bool "MikroTik RouterBOARD 91X support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_SPI
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_USB
++	select ATH79_ROUTERBOOT
++
++config ATH79_MACH_RB922
++	bool "MikroTik RouterBOARD 922 support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_ROUTERBOOT
++	select RLE_DECOMPRESS
++
++config ATH79_MACH_RB95X
++       bool "MikroTik RouterBOARD 95X support"
++       select SOC_AR934X
++       select ATH79_DEV_ETH
++       select ATH79_DEV_NFC
++       select ATH79_DEV_WMAC
++       select ATH79_DEV_USB
++       select ATH79_ROUTERBOOT
++
++config ATH79_MACH_RB2011
++	bool "MikroTik RouterBOARD 2011 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++	select ATH79_ROUTERBOOT
++
++config ATH79_MACH_RBSXTLITE
++	bool "MikroTik RouterBOARD SXT Lite"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_NFC
++	select ATH79_DEV_WMAC
++	select ATH79_ROUTERBOOT
++
++config ATH79_MACH_SMART_300
++	bool "NC-LINK SMART-300 board support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WNDAP360
++	bool "NETGEAR WNDAP360 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_WNDR3700
++	bool "NETGEAR WNDR3700 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WNDR4300
++	bool "NETGEAR WNDR3700v4/WNDR4300 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WNR2000
++	bool "NETGEAR WNR2000 board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_WNR2000_V3
++	bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++	config ATH79_MACH_WNR2200
++	bool "NETGEAR WNR2200 board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_WNR2000_V4
++	bool "NETGEAR WNR2000 V4"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_OM2P
++	bool "OpenMesh OM2P board support"
++	select SOC_AR724X
++	select SOC_AR933X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_OM5P
++	bool "OpenMesh OM5P board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_ONION_OMEGA
++	bool "ONION OMEGA support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MR12
++	bool "Meraki MR12 board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MR16
++	bool "Meraki MR16 board support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MR600
++	bool "OpenMesh MR600 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W04NU
++	bool "Planex MZK-W04NU board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W300NH
++	bool "Planex MZK-W300NH board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_RW2458N
++	bool "Redwave RW2458N board support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_CAP4200AG
++	bool "Senao CAP4200AG support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MR1750
++	bool "OpenMesh MR1750 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MR900
++	bool "OpenMesh MR900 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_EAP7660D
++	bool "Senao EAP7660D support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_BSB
++	bool "Smart Electronics Black Swift board"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_ARCHER_C7
++	bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_CPE510
++	bool "TP-LINK CPE510 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR11U
++	bool "TP-LINK TL-MR11U/TL-MR3040 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros AP121 reference board.
+ 
+-config ATH79_MACH_AP136
+-	bool "Atheros AP136 reference board"
+-	select SOC_QCA955X
++config ATH79_MACH_TL_MR13U
++	bool "TP-LINK TL-MR13U support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros AP136 reference board.
+ 
+-config ATH79_MACH_AP81
+-	bool "Atheros AP81 reference board"
++config ATH79_MACH_TL_MR3020
++	bool "TP-LINK TL-MR3020 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3X20
++	bool "TP-LINK TL-MR3220/3420 support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_TL_WAX50RE
++	bool "TP-LINK TL-WA750/850RE support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WA701ND_V2
++	bool "TP-LINK TL-WA701ND v2 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WA7210N_V2
++       bool "TP-LINK TL-WA7210N v2 support"
++       select SOC_AR724X
++       select ATH79_DEV_AP9X_PCI if PCI
++       select ATH79_DEV_ETH
++       select ATH79_DEV_LEDS_GPIO
++       select ATH79_DEV_GPIO_BUTTONS
++       select ATH79_DEV_M25P80
++       select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WA830RE_V2
++	bool "TP-LINK TL-WA830RE v2 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WA901ND
++	bool "TP-LINK TL-WA901ND/TL-WA7510N support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WA901ND_V2
++	bool "TP-LINK TL-WA901ND v2 support"
+ 	select SOC_AR913X
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WDR3320_V2
++	bool "TP-LINK TL-WDR3320 v2 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros AP81 reference board.
+ 
+-config ATH79_MACH_DB120
+-	bool "Atheros DB120 reference board"
++config ATH79_MACH_TL_WDR3500
++	bool "TP-LINK TL-WDR3500 board support"
+ 	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros DB120 reference board.
+ 
+-config ATH79_MACH_PB44
+-	bool "Atheros PB44 reference board"
++config ATH79_MACH_TL_WDR4300
++	bool "TP-LINK TL-WDR3600/4300/4310 board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WDR6500_V2
++	bool "TP-LINK TL-WDR6500 v2 board support"
++	select SOC_QCA956X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR703N
++	bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR720N_V3
++	bool "TP-LINK TL-WR720N v3/v4 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR741ND
++	bool "TP-LINK TL-WR741ND support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR741ND_V4
++	bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR841N_V1
++	bool "TP-LINK TL-WR841N v1 support"
+ 	select SOC_AR71XX
++	select ATH79_DEV_DSA
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR841N_V8
++	bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR841N_V9
++       bool "TP-LINK TL-WR841N/ND v9 support"
++       select SOC_QCA953X
++       select ATH79_DEV_ETH
++       select ATH79_DEV_GPIO_BUTTONS
++       select ATH79_DEV_LEDS_GPIO
++       select ATH79_DEV_M25P80
++       select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR941ND
++	bool "TP-LINK TL-WR941ND support"
++	select SOC_AR913X
++	select ATH79_DEV_DSA
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR941ND_V6
++	bool "TP-LINK TL-WR941ND v6 support"
++	select SOC_QCA956X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1041N_V2
++	bool "TP-LINK TL-WR1041N v2 support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1043ND
++	bool "TP-LINK TL-WR1043ND support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1043ND_V2
++	bool "TP-LINK TL-WR1043ND v2 support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR2543N
++	bool "TP-LINK TL-WR2543N/ND support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++
++config ATH79_MACH_TEW_632BRP
++	bool "TRENDnet TEW-632BRP support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_TEW_673GRU
++	bool "TRENDnet TEW-673GRU support"
++	select SOC_AR71XX
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_NVRAM
++
++config ATH79_MACH_TEW_712BR
++	bool "TRENDnet TEW-712BR support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_TEW_732BR
++	bool "TRENDnet TEW-732BR support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_UBNT
++	bool "Ubiquiti AR71xx based boards support"
++	select SOC_AR71XX
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
+ 	select ATH79_DEV_USB
+-	help
+-	  Say 'Y' here if you want your kernel to support the
+-	  Atheros PB44 reference board.
+ 
+ config ATH79_MACH_UBNT_XM
+-	bool "Ubiquiti Networks XM (rev 1.0) board"
++	bool "Ubiquiti Networks XM/UniFi boards"
+ 	select SOC_AR724X
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+-	select ATH79_DEV_SPI
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
+ 	help
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  Ubiquiti Networks XM (rev 1.0) board.
+ 
++config ATH79_MACH_WEIO
++	bool "WeIO board"
++	select SOC_AR933X
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_MYNET_N600
++	bool "WD My Net N600 board support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_MYNET_N750
++	bool "WD My Net N750 board support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_MYNET_REXT
++	bool "WD My Net Wi-Fi Range Extender board support"
++	select SOC_AR934X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_NVRAM
++
++config ATH79_MACH_ZCN_1523H
++	bool "Zcomax ZCN-1523H support"
++	select SOC_AR724X
++	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++
++config ATH79_MACH_NBG460N
++	bool "Zyxel NBG460N/550N/550NH board support"
++	select SOC_AR913X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_NBG6716
++	bool "Zyxel NBG6616/NBG6716 board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_NFC
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_CARAMBOLA2
++	bool "8devices Carambola2 board"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_CF_E316N_V2
++	bool "COMFAST CF-E316N v2 board"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_BHU_BXU2000N2_A
++	bool "BHU BXU2000n-2 rev. A support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
++config ATH79_MACH_QIHOO_C301
++	bool "Qihoo 360 C301 board support"
++	select SOC_AR934X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++	select ATH79_DEV_USB
++	select ATH79_NVRAM
++
+ endmenu
+ 
+ config SOC_AR71XX
+@@ -93,12 +1484,39 @@
+ 	select PCI_AR724X if PCI
+ 	def_bool n
+ 
++config SOC_QCA953X
++	select USB_ARCH_HAS_EHCI
++	def_bool n
++
+ config SOC_QCA955X
+ 	select HW_HAS_PCI
+ 	select PCI_AR724X if PCI
+ 	def_bool n
+ 
+-config PCI_AR724X
++config SOC_QCA956X
++	select USB_ARCH_HAS_EHCI
++	select HW_HAS_PCI
++	select PCI_AR724X if PCI
++	def_bool n
++
++config ATH79_DEV_M25P80
++	select ATH79_DEV_SPI
++	def_bool n
++
++config ATH79_DEV_AP9X_PCI
++	select ATH79_PCI_ATH9K_FIXUP
++	def_bool n
++
++config ATH79_DEV_DSA
++	def_bool n
++
++config ATH79_DEV_ETH
++	def_bool n
++
++config ATH79_DEV_DSA
++	def_bool n
++
++config ATH79_DEV_ETH
+ 	def_bool n
+ 
+ config ATH79_DEV_GPIO_BUTTONS
+@@ -107,6 +1525,10 @@
+ config ATH79_DEV_LEDS_GPIO
+ 	def_bool n
+ 
++config ATH79_DEV_NFC
++	depends on (SOC_AR934X || SOC_QCA955X)
++	def_bool n
++
+ config ATH79_DEV_SPI
+ 	def_bool n
+ 
+@@ -114,7 +1536,21 @@
+ 	def_bool n
+ 
+ config ATH79_DEV_WMAC
+-	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
++	depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X)
++	def_bool n
++
++config ATH79_NVRAM
++	def_bool n
++
++config ATH79_PCI_ATH9K_FIXUP
++	def_bool n
++
++config ATH79_ROUTERBOOT
++	select RLE_DECOMPRESS
++	select LZO_DECOMPRESS
++	def_bool n
++
++config PCI_AR724X
+ 	def_bool n
+ 
+ endif
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-alfa-ap96.c linux-4.1.13/arch/mips/ath79/mach-alfa-ap96.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-alfa-ap96.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-alfa-ap96.c	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,151 @@
++/*
++ *  ALFA Network AP96 board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/mmc/host.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/mmc_spi.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define ALFA_AP96_GPIO_PCIE_RESET	2
++#define ALFA_AP96_GPIO_SIM_DETECT	3
++#define ALFA_AP96_GPIO_MICROSD_CD	4
++#define ALFA_AP96_GPIO_PCIE_W_DISABLE	5
++
++#define ALFA_AP96_GPIO_BUTTON_RESET	11
++
++#define ALFA_AP96_KEYS_POLL_INTERVAL		20	/* msecs */
++#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL	(3 * ALFA_AP96_KEYS_POLL_INTERVAL)
++
++static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ALFA_AP96_GPIO_BUTTON_RESET,
++		.active_low	= 1,
++	}
++};
++
++static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
++	.flags		= MMC_SPI_USE_CD_GPIO,
++	.cd_gpio	= ALFA_AP96_GPIO_MICROSD_CD,
++	.cd_debounce	= 1,
++	.caps		= MMC_CAP_NEEDS_POLL,
++	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
++};
++
++static struct ath79_spi_controller_data ap96_spi0_cdata = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++	.is_flash = true,
++};
++
++static struct ath79_spi_controller_data ap96_spi1_cdata = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 1,
++};
++
++static struct ath79_spi_controller_data ap96_spi2_cdata = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 2,
++};
++
++static struct spi_board_info alfa_ap96_spi_info[] = {
++	{
++		.bus_num	= 0,
++		.chip_select	= 0,
++		.max_speed_hz	= 25000000,
++		.modalias	= "m25p80",
++		.controller_data = &ap96_spi0_cdata
++	}, {
++		.bus_num	= 0,
++		.chip_select	= 1,
++		.max_speed_hz	= 25000000,
++		.modalias	= "mmc_spi",
++		.platform_data	= &alfa_ap96_mmc_data,
++		.controller_data = &ap96_spi1_cdata
++	}, {
++		.bus_num	= 0,
++		.chip_select	= 2,
++		.max_speed_hz	= 6250000,
++		.modalias	= "rtc-pcf2123",
++		.controller_data = &ap96_spi2_cdata
++	},
++};
++
++static struct ath79_spi_platform_data alfa_ap96_spi_data = {
++	.bus_num		= 0,
++	.num_chipselect		= 3,
++};
++
++static void __init alfa_ap96_gpio_setup(void)
++{
++	ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
++				   AR71XX_GPIO_FUNC_SPI_CS2_EN);
++
++	gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
++	gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
++	gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
++	gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
++	gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
++	gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
++}
++
++#define ALFA_AP96_WAN_PHYMASK	BIT(4)
++#define ALFA_AP96_LAN_PHYMASK	BIT(5)
++#define ALFA_AP96_MDIO_PHYMASK	(ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
++
++static void __init alfa_ap96_init(void)
++{
++	alfa_ap96_gpio_setup();
++
++	ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
++	ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++	ath79_register_eth(0);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
++	ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++	ath79_register_eth(1);
++
++	ath79_register_pci();
++	ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
++			   ARRAY_SIZE(alfa_ap96_spi_info));
++
++	ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(alfa_ap96_gpio_keys),
++					 alfa_ap96_gpio_keys);
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
++	     alfa_ap96_init);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-alfa-nx.c linux-4.1.13/arch/mips/ath79/mach-alfa-nx.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-alfa-nx.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-alfa-nx.c	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,113 @@
++/*
++ *  ALFA Network N2/N5 board support
++ *
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++
++#define ALFA_NX_GPIO_LED_2		17
++#define ALFA_NX_GPIO_LED_3		16
++#define ALFA_NX_GPIO_LED_5		12
++#define ALFA_NX_GPIO_LED_6		8
++#define ALFA_NX_GPIO_LED_7		6
++#define ALFA_NX_GPIO_LED_8		7
++
++#define ALFA_NX_GPIO_BTN_RESET		11
++
++#define ALFA_NX_KEYS_POLL_INTERVAL	20	/* msecs */
++#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL)
++
++#define ALFA_NX_MAC0_OFFSET		0
++#define ALFA_NX_MAC1_OFFSET		6
++#define ALFA_NX_CALDATA_OFFSET		0x1000
++
++static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ALFA_NX_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_led alfa_nx_leds_gpio[] __initdata = {
++	{
++		.name		= "alfa:green:led_2",
++		.gpio		= ALFA_NX_GPIO_LED_2,
++		.active_low	= 1,
++	}, {
++		.name		= "alfa:green:led_3",
++		.gpio		= ALFA_NX_GPIO_LED_3,
++		.active_low	= 1,
++	}, {
++		.name		= "alfa:red:led_5",
++		.gpio		= ALFA_NX_GPIO_LED_5,
++		.active_low	= 1,
++	}, {
++		.name		= "alfa:amber:led_6",
++		.gpio		= ALFA_NX_GPIO_LED_6,
++		.active_low	= 1,
++	}, {
++		.name		= "alfa:green:led_7",
++		.gpio		= ALFA_NX_GPIO_LED_7,
++		.active_low	= 1,
++	}, {
++		.name		= "alfa:green:led_8",
++		.gpio		= ALFA_NX_GPIO_LED_8,
++		.active_low	= 1,
++	}
++};
++
++static void __init alfa_nx_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
++				  AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				  AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				  AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				  AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				  AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio),
++				 alfa_nx_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(alfa_nx_gpio_keys),
++					alfa_nx_gpio_keys);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       art + ALFA_NX_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr,
++		       art + ALFA_NX_MAC1_OFFSET, 0);
++
++	/* WAN port */
++	ath79_register_eth(0);
++	/* LAN port */
++	ath79_register_eth(1);
++
++	ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5",
++	     alfa_nx_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-all0258n.c linux-4.1.13/arch/mips/ath79/mach-all0258n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-all0258n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-all0258n.c	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,88 @@
++/*
++ *  Allnet ALL0258N support
++ *
++ *  Copyright (C) 2011 Daniel Golle <dgolle@allnet.de>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++
++/* found via /sys/gpio/... try and error */
++#define ALL0258N_GPIO_BTN_RESET		1
++#define ALL0258N_GPIO_LED_RSSIHIGH	13
++#define ALL0258N_GPIO_LED_RSSIMEDIUM	15
++#define ALL0258N_GPIO_LED_RSSILOW	14
++
++/* defaults taken from others machs */
++#define ALL0258N_KEYS_POLL_INTERVAL	20	/* msecs */
++#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
++
++/* showed up in the original firmware's bootlog */
++#define ALL0258N_SEC_PHYMASK BIT(3)
++
++static struct gpio_led all0258n_leds_gpio[] __initdata = {
++	{
++		.name		= "all0258n:green:rssihigh",
++		.gpio		= ALL0258N_GPIO_LED_RSSIHIGH,
++		.active_low	= 1,
++	}, {
++		.name		= "all0258n:yellow:rssimedium",
++		.gpio		= ALL0258N_GPIO_LED_RSSIMEDIUM,
++		.active_low	= 1,
++	}, {
++		.name		= "all0258n:red:rssilow",
++		.gpio		= ALL0258N_GPIO_LED_RSSILOW,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button all0258n_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ALL0258N_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static void __init all0258n_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000);
++	u8 *ee =  (u8 *) KSEG1ADDR(0x1f7f1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio),
++				 all0258n_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(all0258n_gpio_keys),
++					all0258n_gpio_keys);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++
++	ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ap91_pci_init(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N",
++	     all0258n_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-all0315n.c linux-4.1.13/arch/mips/ath79/mach-all0315n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-all0315n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-all0315n.c	2015-09-13 20:04:35.064524285 +0200
+@@ -0,0 +1,85 @@
++/*
++ *  Allnet ALL0315N support
++ *
++ *  Copyright (C) 2012 Daniel Golle <dgolle@allnet.de>
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-m25p80.h"
++#include "dev-leds-gpio.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define ALL0315N_GPIO_BTN_RESET		0
++#define ALL0315N_GPIO_LED_RSSIHIGH	14
++#define ALL0315N_GPIO_LED_RSSIMEDIUM	15
++#define ALL0315N_GPIO_LED_RSSILOW	16
++
++#define ALL0315N_KEYS_POLL_INTERVAL	20	/* msecs */
++#define ALL0315N_KEYS_DEBOUNCE_INTERVAL	(3 * ALL0315N_KEYS_POLL_INTERVAL)
++
++static struct gpio_led all0315n_leds_gpio[] __initdata = {
++	{
++		.name		= "all0315n:green:rssihigh",
++		.gpio		= ALL0315N_GPIO_LED_RSSIHIGH,
++		.active_low	= 1,
++	}, {
++		.name		= "all0315n:yellow:rssimedium",
++		.gpio		= ALL0315N_GPIO_LED_RSSIMEDIUM,
++		.active_low	= 1,
++	}, {
++		.name		= "all0315n:red:rssilow",
++		.gpio		= ALL0315N_GPIO_LED_RSSILOW,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button all0315n_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = ALL0315N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ALL0315N_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static void __init all0315n_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1ffc0000);
++	u8 *ee =  (u8 *) KSEG1ADDR(0x1ffc1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(all0315n_leds_gpio),
++					all0315n_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, ALL0315N_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(all0315n_gpio_keys),
++					all0315n_gpio_keys);
++
++	ap9x_pci_setup_wmac_led_pin(0, 1);
++	ap91_pci_init(ee, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_ALL0315N, "ALL0315N", "Allnet ALL0315N",
++	     all0315n_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-antminer-s1.c linux-4.1.13/arch/mips/ath79/mach-antminer-s1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-antminer-s1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-antminer-s1.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,98 @@
++/*
++ *   Bitmain Antminer S1 board support
++ *
++ *  Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "dev-usb.h"
++
++#define ANTMINER_S1_GPIO_BTN_RESET		11
++
++#define ANTMINER_S1_GPIO_LED_SYSTEM		23
++#define ANTMINER_S1_GPIO_LED_WLAN		0
++#define ANTMINER_S1_GPIO_USB_POWER		26
++
++#define ANTMINER_S1_KEYSPOLL_INTERVAL	20	/* msecs */
++#define ANTMINER_S1_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S1_KEYSPOLL_INTERVAL)
++
++static const char *ANTMINER_S1_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data ANTMINER_S1_flash_data = {
++	.part_probes	= ANTMINER_S1_part_probes,
++};
++
++static struct gpio_led ANTMINER_S1_leds_gpio[] __initdata = {
++	{
++		.name		= "antminer-s1:green:system",
++		.gpio		= ANTMINER_S1_GPIO_LED_SYSTEM,
++		.active_low	= 0,
++	},{
++		.name		= "antminer-s1:green:wlan",
++		.gpio		= ANTMINER_S1_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button ANTMINER_S1_GPIO_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = ANTMINER_S1_KEYSDEBOUNCE_INTERVAL,
++		.gpio		= ANTMINER_S1_GPIO_BTN_RESET,
++		.active_low	= 0,
++	},
++};
++
++static void __init antminer_s1_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S1_leds_gpio),
++				 ANTMINER_S1_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, ANTMINER_S1_KEYSPOLL_INTERVAL,
++					ARRAY_SIZE(ANTMINER_S1_GPIO_keys),
++					ANTMINER_S1_GPIO_keys);
++
++	gpio_request_one(ANTMINER_S1_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_register_m25p80(&ANTMINER_S1_flash_data);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_ANTMINER_S1, "ANTMINER-S1",
++	     "Antminer-S1", antminer_s1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-antminer-s3.c linux-4.1.13/arch/mips/ath79/mach-antminer-s3.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-antminer-s3.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-antminer-s3.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,103 @@
++/*
++ *   Bitmain Antminer S3 board support
++ *
++ *  Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "dev-usb.h"
++
++#define ANTMINER_S3_GPIO_LED_WLAN		0
++#define ANTMINER_S3_GPIO_LED_SYSTEM		17
++#define ANTMINER_S3_GPIO_LED_LAN		22
++#define ANTMINER_S3_GPIO_USB_POWER		26
++
++#define ANTMINER_S3_GPIO_BTN_RESET		11
++
++#define ANTMINER_S3_KEYSPOLL_INTERVAL	88	/* msecs */
++#define ANTMINER_S3_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S3_KEYSPOLL_INTERVAL)
++
++static const char *ANTMINER_S3_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data ANTMINER_S3_flash_data = {
++	.part_probes	= ANTMINER_S3_part_probes,
++};
++
++static struct gpio_led ANTMINER_S3_leds_gpio[] __initdata = {
++	{
++		.name		= "antminer-s3:green:wlan",
++		.gpio		= ANTMINER_S3_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},{
++		.name		= "antminer-s3:green:system",
++		.gpio		= ANTMINER_S3_GPIO_LED_SYSTEM,
++		.active_low	= 0,
++	},{
++		.name		= "antminer-s3:yellow:lan",
++		.gpio		= ANTMINER_S3_GPIO_LED_LAN,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button ANTMINER_S3_GPIO_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = ANTMINER_S3_KEYSDEBOUNCE_INTERVAL,
++		.gpio		= ANTMINER_S3_GPIO_BTN_RESET,
++		.active_low	= 0,
++	},
++};
++
++static void __init antminer_s3_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S3_leds_gpio),
++				 ANTMINER_S3_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, ANTMINER_S3_KEYSPOLL_INTERVAL,
++					ARRAY_SIZE(ANTMINER_S3_GPIO_keys),
++					ANTMINER_S3_GPIO_keys);
++
++	gpio_request_one(ANTMINER_S3_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_register_m25p80(&ANTMINER_S3_flash_data);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_ANTMINER_S3, "ANTMINER-S3",
++	     "Antminer-S3", antminer_s3_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap113.c linux-4.1.13/arch/mips/ath79/mach-ap113.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap113.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap113.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,84 @@
++/*
++ *  Atheros AP113 board support
++ *
++ *  Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "pci.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define AP113_GPIO_LED_USB		0
++#define AP113_GPIO_LED_STATUS		1
++#define AP113_GPIO_LED_ST		11
++
++#define AP113_GPIO_BTN_JUMPSTART	12
++
++#define AP113_KEYS_POLL_INTERVAL	20	/* msecs */
++#define AP113_KEYS_DEBOUNCE_INTERVAL	(3 * AP113_KEYS_POLL_INTERVAL)
++
++static struct gpio_led ap113_leds_gpio[] __initdata = {
++	{
++		.name		= "ap113:green:usb",
++		.gpio		= AP113_GPIO_LED_USB,
++		.active_low	= 1,
++	},
++	{
++		.name		= "ap113:green:status",
++		.gpio		= AP113_GPIO_LED_STATUS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "ap113:green:st",
++		.gpio		= AP113_GPIO_LED_ST,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
++	{
++		.desc		= "jumpstart button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP113_GPIO_BTN_JUMPSTART,
++		.active_low	= 1,
++	},
++};
++
++static void __init ap113_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~BIT(0));
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_mask = BIT(0);
++
++	ath79_register_eth(0);
++
++	ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(ap113_gpio_keys),
++					 ap113_gpio_keys);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
++					ap113_leds_gpio);
++
++	ath79_register_pci();
++
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
++	     ap113_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap121.c linux-4.1.13/arch/mips/ath79/mach-ap121.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap121.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap121.c	2015-12-04 19:57:04.298083689 +0100
+@@ -1,19 +1,21 @@
+ /*
+  *  Atheros AP121 board support
+  *
+- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+  */
+ 
+-#include "machtypes.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
++#include "machtypes.h"
+ 
+ #define AP121_GPIO_LED_WLAN		0
+ #define AP121_GPIO_LED_USB		1
+@@ -24,7 +26,14 @@
+ #define AP121_KEYS_POLL_INTERVAL	20	/* msecs */
+ #define AP121_KEYS_DEBOUNCE_INTERVAL	(3 * AP121_KEYS_POLL_INTERVAL)
+ 
+-#define AP121_CAL_DATA_ADDR	0x1fff1000
++#define AP121_MAC0_OFFSET		0x0000
++#define AP121_MAC1_OFFSET		0x0006
++#define AP121_CALDATA_OFFSET		0x1000
++#define AP121_WMAC_MAC_OFFSET		0x1002
++
++#define AP121_MINI_GPIO_LED_WLAN	0
++#define AP121_MINI_GPIO_BTN_JUMPSTART	12
++#define AP121_MINI_GPIO_BTN_RESET	11
+ 
+ static struct gpio_led ap121_leds_gpio[] __initdata = {
+ 	{
+@@ -58,35 +67,78 @@
+ 	}
+ };
+ 
+-static struct spi_board_info ap121_spi_info[] = {
++static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
+ 	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "mx25l1606e",
+-	}
++		.name		= "ap121:green:wlan",
++		.gpio		= AP121_MINI_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},
+ };
+ 
+-static struct ath79_spi_platform_data ap121_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect = 1,
++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
++	{
++		.desc		= "jumpstart button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP121_MINI_GPIO_BTN_JUMPSTART,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP121_MINI_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
+ };
+ 
++static void __init ap121_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_wmac(art + AP121_CALDATA_OFFSET,
++			    art + AP121_WMAC_MAC_OFFSET);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++
++	/* WAN port */
++	ath79_register_eth(0);
++}
++
+ static void __init ap121_setup(void)
+ {
+-	u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
++	ap121_common_setup();
+ 
+ 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+ 				 ap121_leds_gpio);
+ 	ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+ 					ARRAY_SIZE(ap121_gpio_keys),
+ 					ap121_gpio_keys);
+-
+-	ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+-			   ARRAY_SIZE(ap121_spi_info));
+ 	ath79_register_usb();
+-	ath79_register_wmac(cal_data);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+ 	     ap121_setup);
++
++static void __init ap121_mini_setup(void)
++{
++	ap121_common_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
++				 ap121_mini_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ap121_mini_gpio_keys),
++					ap121_mini_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
++	     ap121_mini_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap132.c linux-4.1.13/arch/mips/ath79/mach-ap132.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap132.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap132.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,189 @@
++/*
++ * Atheros AP132 reference board support
++ *
++ * Copyright (c) 2012 Qualcomm Atheros
++ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (c) 2013 Embedded Wireless GmbH <info@embeddedwireless.de>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define AP132_GPIO_LED_USB		4
++#define AP132_GPIO_LED_WLAN_5G		12
++#define AP132_GPIO_LED_WLAN_2G		13
++#define AP132_GPIO_LED_STATUS_RED	14
++#define AP132_GPIO_LED_WPS_RED		15
++
++#define AP132_GPIO_BTN_WPS		16
++
++#define AP132_KEYS_POLL_INTERVAL	20	/* msecs */
++#define AP132_KEYS_DEBOUNCE_INTERVAL	(3 * AP132_KEYS_POLL_INTERVAL)
++
++#define AP132_MAC0_OFFSET		0
++#define AP132_WMAC_CALDATA_OFFSET	0x1000
++
++static struct gpio_led ap132_leds_gpio[] __initdata = {
++	{
++		.name		= "ap132:red:status",
++		.gpio		= AP132_GPIO_LED_STATUS_RED,
++		.active_low	= 1,
++	},
++	{
++		.name		= "ap132:red:wps",
++		.gpio		= AP132_GPIO_LED_WPS_RED,
++		.active_low	= 1,
++	},
++	{
++		.name		= "ap132:red:wlan-2g",
++		.gpio		= AP132_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "ap132:red:usb",
++		.gpio		= AP132_GPIO_LED_USB,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button ap132_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AP132_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP132_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg ap132_ar8327_pad0_cfg;
++
++static struct ar8327_platform_data ap132_ar8327_data = {
++	.pad0_cfg = &ap132_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info ap132_mdio1_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.1",
++		.phy_addr = 0,
++		.platform_data = &ap132_ar8327_data,
++	},
++};
++
++static void __init ap132_mdio_setup(void)
++{
++	void __iomem *base;
++	u32 t;
++
++#define GPIO_IN_ENABLE3_ADDRESS                                      0x0050
++#define GPIO_IN_ENABLE3_MII_GE1_MDI_MASK                             0x00ff0000
++#define GPIO_IN_ENABLE3_MII_GE1_MDI_LSB                              16
++#define GPIO_IN_ENABLE3_MII_GE1_MDI_SET(x)                           (((x) << GPIO_IN_ENABLE3_MII_GE1_MDI_LSB) & GPIO_IN_ENABLE3_MII_GE1_MDI_MASK)
++#define GPIO_OUT_FUNCTION4_ADDRESS                                   0x003c
++#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK                       0xff000000
++#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB                        24
++#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(x)                     (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK)
++#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK                       0x0000ff00
++#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB                        8
++#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(x)                     (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK)
++
++	base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
++
++	t = __raw_readl(base + GPIO_IN_ENABLE3_ADDRESS);
++	t &= ~GPIO_IN_ENABLE3_MII_GE1_MDI_MASK;
++	t |= GPIO_IN_ENABLE3_MII_GE1_MDI_SET(19);
++	__raw_writel(t, base + GPIO_IN_ENABLE3_ADDRESS);
++
++
++	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 19), base + AR71XX_GPIO_REG_OE);
++
++	__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 17), base + AR71XX_GPIO_REG_OE);
++
++
++	t = __raw_readl(base + GPIO_OUT_FUNCTION4_ADDRESS);
++	t &= ~(GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK);
++	t |= GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(0x20) | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(0x21);
++	__raw_writel(t, base + GPIO_OUT_FUNCTION4_ADDRESS);
++
++	iounmap(base);
++
++}
++
++static void __init ap132_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap132_leds_gpio),
++				 ap132_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, AP132_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ap132_gpio_keys),
++					ap132_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_wmac(art + AP132_WMAC_CALDATA_OFFSET, NULL);
++
++	/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
++	ap132_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
++	ap132_ar8327_pad0_cfg.sgmii_delay_en = true;
++
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ap132_mdio_setup();
++
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + AP132_MAC0_OFFSET, 0);
++
++	mdiobus_register_board_info(ap132_mdio1_info,
++				    ARRAY_SIZE(ap132_mdio1_info));
++
++	/* GMAC1 is connected to the SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_data.phy_mask = BIT(0);
++	ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP132, "AP132",
++	     "Atheros AP132 reference board",
++	     ap132_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap136.c linux-4.1.13/arch/mips/ath79/mach-ap136.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap136.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap136.c	2015-12-04 19:57:04.370078979 +0100
+@@ -18,23 +18,29 @@
+  *
+  */
+ 
+-#include <linux/pci.h>
+-#include <linux/ath9k_platform.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
++#include "dev-eth.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+ 
+-#define AP136_GPIO_LED_STATUS_RED	14
+-#define AP136_GPIO_LED_STATUS_GREEN	19
+ #define AP136_GPIO_LED_USB		4
+-#define AP136_GPIO_LED_WLAN_2G		13
+ #define AP136_GPIO_LED_WLAN_5G		12
++#define AP136_GPIO_LED_WLAN_2G		13
++#define AP136_GPIO_LED_STATUS_RED	14
+ #define AP136_GPIO_LED_WPS_RED		15
++#define AP136_GPIO_LED_STATUS_GREEN	19
+ #define AP136_GPIO_LED_WPS_GREEN	20
+ 
+ #define AP136_GPIO_BTN_WPS		16
+@@ -43,37 +49,39 @@
+ #define AP136_KEYS_POLL_INTERVAL	20	/* msecs */
+ #define AP136_KEYS_DEBOUNCE_INTERVAL	(3 * AP136_KEYS_POLL_INTERVAL)
+ 
+-#define AP136_WMAC_CALDATA_OFFSET 0x1000
+-#define AP136_PCIE_CALDATA_OFFSET 0x5000
++#define AP136_MAC0_OFFSET		0
++#define AP136_MAC1_OFFSET		6
++#define AP136_WMAC_CALDATA_OFFSET	0x1000
++#define AP136_PCIE_CALDATA_OFFSET	0x5000
+ 
+ static struct gpio_led ap136_leds_gpio[] __initdata = {
+ 	{
+-		.name		= "qca:green:status",
++		.name		= "ap136:green:status",
+ 		.gpio		= AP136_GPIO_LED_STATUS_GREEN,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:red:status",
++		.name		= "ap136:red:status",
+ 		.gpio		= AP136_GPIO_LED_STATUS_RED,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:green:wps",
++		.name		= "ap136:green:wps",
+ 		.gpio		= AP136_GPIO_LED_WPS_GREEN,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:red:wps",
++		.name		= "ap136:red:wps",
+ 		.gpio		= AP136_GPIO_LED_WPS_RED,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:red:wlan-2g",
++		.name		= "ap136:red:wlan-2g",
+ 		.gpio		= AP136_GPIO_LED_WLAN_2G,
+ 		.active_low	= 1,
+ 	},
+ 	{
+-		.name		= "qca:red:usb",
++		.name		= "ap136:red:usb",
+ 		.gpio		= AP136_GPIO_LED_USB,
+ 		.active_low	= 1,
+ 	}
+@@ -98,59 +106,151 @@
+ 	},
+ };
+ 
+-static struct spi_board_info ap136_spi_info[] = {
+-	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "mx25l6405d",
+-	}
++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
++static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
++
++static struct ar8327_platform_data ap136_ar8327_data = {
++	.pad0_cfg = &ap136_ar8327_pad0_cfg,
++	.pad6_cfg = &ap136_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
+ };
+ 
+-static struct ath79_spi_platform_data ap136_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect	= 1,
++static struct mdio_board_info ap136_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &ap136_ar8327_data,
++	},
+ };
+ 
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ap136_ath9k_data;
++static void __init ap136_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
++				 ap136_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ap136_gpio_keys),
++					ap136_gpio_keys);
++
++	ath79_register_usb();
++	ath79_register_nfc();
++
++	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+ 
+-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
++	ath79_register_mdio(0, 0x0);
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
++
++	mdiobus_register_board_info(ap136_mdio0_info,
++				    ARRAY_SIZE(ap136_mdio0_info));
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected tot eh SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(1);
++}
++
++static void __init ap136_010_setup(void)
+ {
+-	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+-		dev->dev.platform_data = &ap136_ath9k_data;
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ 
+-	return 0;
++	/* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
++	ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
++	ap136_ar8327_pad0_cfg.txclk_delay_en = true;
++	ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
++	ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++	ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++
++	/* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
++	ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
++	ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++	ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
++
++	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ap136_common_setup();
++	ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
+ }
+ 
+-static void __init ap136_pci_init(u8 *eeprom)
++MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
++	     "Atheros AP136-010 reference board",
++	     ap136_010_setup);
++
++static void __init ap136_020_common_setup(void)
+ {
+-	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+-	       sizeof(ap136_ath9k_data.eeprom_data));
++	/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
++	ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
++	ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
++
++	/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
++	ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
++	ap136_ar8327_pad6_cfg.txclk_delay_en = true;
++	ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++	ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++	ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+ 
+-	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+-	ath79_register_pci();
++	ath79_eth0_pll_data.pll_1000 = 0x56000000;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ap136_common_setup();
+ }
+-#else
+-static inline void ap136_pci_init(u8 *eeprom) {}
+-#endif /* CONFIG_PCI */
+ 
+-static void __init ap136_setup(void)
++static void __init ap136_020_setup(void)
+ {
+ 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ 
+-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+-				 ap136_leds_gpio);
+-	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+-					ARRAY_SIZE(ap136_gpio_keys),
+-					ap136_gpio_keys);
+-	ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+-			   ARRAY_SIZE(ap136_spi_info));
+-	ath79_register_usb();
+-	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+-	ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
++	ap136_020_common_setup();
++	ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
+ }
+ 
+-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
+-	     "Atheros AP136-010 reference board",
+-	     ap136_setup);
++MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
++	     "Atheros AP136-020 reference board",
++	     ap136_020_setup);
++
++/*
++ * AP135-020 is similar to AP136-020, any future AP135 specific init
++ * code can be added here.
++ */
++static void __init ap135_020_setup(void)
++{
++	ap136_leds_gpio[0].name = "ap135:green:status";
++	ap136_leds_gpio[1].name = "ap135:red:status";
++	ap136_leds_gpio[2].name = "ap135:green:wps";
++	ap136_leds_gpio[3].name = "ap135:red:wps";
++	ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
++	ap136_leds_gpio[5].name = "ap135:red:usb";
++
++	ap136_020_common_setup();
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
++	     "Atheros AP135-020 reference board",
++	     ap135_020_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap143.c linux-4.1.13/arch/mips/ath79/mach-ap143.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap143.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap143.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,142 @@
++/*
++ * Atheros AP143 reference board support
++ *
++ * Copyright (c) 2013-2015 The Linux Foundation. All rights reserved.
++ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define AP143_GPIO_LED_WLAN		12
++#define AP143_GPIO_LED_WPS		13
++#define AP143_GPIO_LED_STATUS		13
++
++#define AP143_GPIO_LED_WAN		4
++#define AP143_GPIO_LED_LAN1		16
++#define AP143_GPIO_LED_LAN2		15
++#define AP143_GPIO_LED_LAN3		14
++#define AP143_GPIO_LED_LAN4		11
++
++#define AP143_GPIO_BTN_WPS		17
++
++#define AP143_KEYS_POLL_INTERVAL	20	/* msecs */
++#define AP143_KEYS_DEBOUNCE_INTERVAL	(3 * AP143_KEYS_POLL_INTERVAL)
++
++#define AP143_MAC0_OFFSET		0
++#define AP143_MAC1_OFFSET		6
++#define AP143_WMAC_CALDATA_OFFSET	0x1000
++
++static struct gpio_led ap143_leds_gpio[] __initdata = {
++	{
++		.name		= "ap143:green:status",
++		.gpio		= AP143_GPIO_LED_STATUS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "ap143:green:wlan",
++		.gpio		= AP143_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button ap143_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AP143_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP143_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++static void __init ap143_gpio_led_setup(void)
++{
++	ath79_gpio_direction_select(AP143_GPIO_LED_WAN, true);
++	ath79_gpio_direction_select(AP143_GPIO_LED_LAN1, true);
++	ath79_gpio_direction_select(AP143_GPIO_LED_LAN2, true);
++	ath79_gpio_direction_select(AP143_GPIO_LED_LAN3, true);
++	ath79_gpio_direction_select(AP143_GPIO_LED_LAN4, true);
++
++	ath79_gpio_output_select(AP143_GPIO_LED_WAN,
++			QCA953X_GPIO_OUT_MUX_LED_LINK5);
++	ath79_gpio_output_select(AP143_GPIO_LED_LAN1,
++			QCA953X_GPIO_OUT_MUX_LED_LINK1);
++	ath79_gpio_output_select(AP143_GPIO_LED_LAN2,
++			QCA953X_GPIO_OUT_MUX_LED_LINK2);
++	ath79_gpio_output_select(AP143_GPIO_LED_LAN3,
++			QCA953X_GPIO_OUT_MUX_LED_LINK3);
++	ath79_gpio_output_select(AP143_GPIO_LED_LAN4,
++			QCA953X_GPIO_OUT_MUX_LED_LINK4);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap143_leds_gpio),
++			ap143_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, AP143_KEYS_POLL_INTERVAL,
++			ARRAY_SIZE(ap143_gpio_keys),
++			ap143_gpio_keys);
++}
++
++static void __init ap143_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ap143_gpio_led_setup();
++
++	ath79_register_usb();
++
++	ath79_wmac_set_led_pin(AP143_GPIO_LED_WLAN);
++	ath79_register_wmac(art + AP143_WMAC_CALDATA_OFFSET, NULL);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP143_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + AP143_MAC1_OFFSET, 0);
++
++	/* WAN port */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_register_eth(0);
++
++	/* LAN ports */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_switch_data.phy_poll_mask |= BIT(4);
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP143, "AP143", "Qualcomm Atheros AP143 reference board",
++	     ap143_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap147.c linux-4.1.13/arch/mips/ath79/mach-ap147.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap147.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap147.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,125 @@
++/*
++ *  Atheros AP147 reference board support
++ *
++ *  Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
++ *  Copyright (C) 2015 Sven Eckelmann <sven@open-mesh.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define AP147_GPIO_LED_WAN	4
++#define AP147_GPIO_LED_LAN1	16
++#define AP147_GPIO_LED_LAN2	15
++#define AP147_GPIO_LED_LAN3	14
++#define AP147_GPIO_LED_LAN4	11
++#define AP147_GPIO_LED_STATUS	13
++#define AP147_GPIO_LED_WLAN_2G	12
++
++#define AP147_GPIO_BTN_WPS	17
++
++#define AP147_KEYS_POLL_INTERVAL	20	/* msecs */
++#define AP147_KEYS_DEBOUNCE_INTERVAL	(3 * AP147_KEYS_POLL_INTERVAL)
++
++#define AP147_MAC0_OFFSET	0x1000
++
++static struct gpio_led ap147_leds_gpio[] __initdata = {
++	{
++		.name		= "ap147:green:status",
++		.gpio		= AP147_GPIO_LED_STATUS,
++		.active_low	= 1,
++	}, {
++		.name		= "ap147:green:wlan-2g",
++		.gpio		= AP147_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	}, {
++		.name		= "ap147:green:lan1",
++		.gpio		= AP147_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "ap147:green:lan2",
++		.gpio		= AP147_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}, {
++		.name		= "ap147:green:lan3",
++		.gpio		= AP147_GPIO_LED_LAN3,
++		.active_low	= 1,
++	}, {
++		.name		= "ap147:green:lan4",
++		.gpio		= AP147_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}, {
++		.name		= "ap147:green:wan",
++		.gpio		= AP147_GPIO_LED_WAN,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button ap147_gpio_keys[] __initdata = {
++	{
++		.desc		= "wps button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AP147_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP147_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static void __init ap147_setup(void)
++{
++	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap147_leds_gpio),
++				 ap147_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, AP147_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ap147_gpio_keys),
++					ap147_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_pci();
++
++	ath79_register_wmac(art + AP147_MAC0_OFFSET, NULL);
++
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_switch_data.phy_poll_mask |= BIT(4);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art, 0);
++	ath79_register_eth(1);
++
++	/* WAN */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_init_mac(ath79_eth0_data.mac_addr, art, 1);
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP147_010, "AP147-010", "Atheros AP147-010 reference board", ap147_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap152.c linux-4.1.13/arch/mips/ath79/mach-ap152.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap152.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap152.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,141 @@
++
++/*
++ * Qualcomm Atheros AP152 reference board support
++ *
++ * Copyright (c) 2015 Qualcomm Atheros
++ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++#include "pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++
++#define AP152_GPIO_LED_USB0		7
++#define AP152_GPIO_LED_USB1		8
++
++#define AP152_GPIO_BTN_RESET            2
++#define AP152_GPIO_BTN_WPS              1
++#define AP152_KEYS_POLL_INTERVAL        20     /* msecs */
++#define AP152_KEYS_DEBOUNCE_INTERVAL    (3 * AP152_KEYS_POLL_INTERVAL)
++
++#define AP152_MAC0_OFFSET               0
++#define AP152_WMAC_CALDATA_OFFSET       0x1000
++
++static struct gpio_led ap152_leds_gpio[] __initdata = {
++	{
++		.name		= "ap152:green:usb0",
++		.gpio		= AP152_GPIO_LED_USB0,
++		.active_low	= 1,
++	},
++	{
++		.name		= "ap152:green:usb1",
++		.gpio		= AP152_GPIO_LED_USB1,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button ap152_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AP152_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP152_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = AP152_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP152_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg ap152_ar8337_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_SGMII,
++	.sgmii_delay_en = true,
++};
++
++static struct ar8327_platform_data ap152_ar8337_data = {
++	.pad0_cfg = &ap152_ar8337_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info ap152_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &ap152_ar8337_data,
++	},
++};
++
++static void __init ap152_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap152_leds_gpio),
++				 ap152_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, AP152_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ap152_gpio_keys),
++					ap152_gpio_keys);
++
++	ath79_register_usb();
++
++	platform_device_register(&ath79_mdio0_device);
++
++	mdiobus_register_board_info(ap152_mdio0_info,
++				    ARRAY_SIZE(ap152_mdio0_info));
++
++	ath79_register_wmac(art + AP152_WMAC_CALDATA_OFFSET, NULL);
++	ath79_register_pci();
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP152_MAC0_OFFSET, 0);
++
++	/* GMAC0 is connected to an AR8337 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP152, "AP152", "Qualcomm Atheros AP152 reference board",
++	     ap152_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap81.c linux-4.1.13/arch/mips/ath79/mach-ap81.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap81.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap81.c	2015-12-04 19:57:04.310082904 +0100
+@@ -9,12 +9,16 @@
+  *  by the Free Software Foundation.
+  */
+ 
+-#include "machtypes.h"
+-#include "dev-wmac.h"
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
+ #include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
+ 
+ #define AP81_GPIO_LED_STATUS	1
+ #define AP81_GPIO_LED_AOSS	3
+@@ -67,20 +71,6 @@
+ 	}
+ };
+ 
+-static struct spi_board_info ap81_spi_info[] = {
+-	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "m25p64",
+-	}
+-};
+-
+-static struct ath79_spi_platform_data ap81_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect = 1,
+-};
+-
+ static void __init ap81_setup(void)
+ {
+ 	u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
+@@ -90,10 +80,24 @@
+ 	ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+ 					ARRAY_SIZE(ap81_gpio_keys),
+ 					ap81_gpio_keys);
+-	ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+-			   ARRAY_SIZE(ap81_spi_info));
+-	ath79_register_wmac(cal_data);
++	ath79_register_m25p80(NULL);
++	ath79_register_wmac(cal_data, NULL);
+ 	ath79_register_usb();
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.has_ar8216 = 1;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap83.c linux-4.1.13/arch/mips/ath79/mach-ap83.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap83.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap83.c	2015-12-04 19:57:04.438074530 +0100
+@@ -0,0 +1,242 @@
++/*
++ *  Atheros AP83 board support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_gpio.h>
++#include <linux/spi/vsc7385.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define AP83_GPIO_LED_WLAN	6
++#define AP83_GPIO_LED_POWER	14
++#define AP83_GPIO_LED_JUMPSTART	15
++#define AP83_GPIO_BTN_JUMPSTART	12
++#define AP83_GPIO_BTN_RESET	21
++
++#define AP83_050_GPIO_VSC7385_CS	1
++#define AP83_050_GPIO_VSC7385_MISO	3
++#define AP83_050_GPIO_VSC7385_MOSI	16
++#define AP83_050_GPIO_VSC7385_SCK	17
++
++#define AP83_KEYS_POLL_INTERVAL		20	/* msecs */
++#define AP83_KEYS_DEBOUNCE_INTERVAL	(3 * AP83_KEYS_POLL_INTERVAL)
++
++static struct physmap_flash_data ap83_flash_data = {
++	.width		= 2,
++};
++
++static struct resource ap83_flash_resources[] = {
++	[0] = {
++		.start	= AR71XX_SPI_BASE,
++		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct platform_device ap83_flash_device = {
++	.name		= "ar91xx-flash",
++	.id		= -1,
++	.resource	= ap83_flash_resources,
++	.num_resources	= ARRAY_SIZE(ap83_flash_resources),
++	.dev		= {
++		.platform_data = &ap83_flash_data,
++	}
++};
++
++static struct gpio_led ap83_leds_gpio[] __initdata = {
++	{
++		.name		= "ap83:green:jumpstart",
++		.gpio		= AP83_GPIO_LED_JUMPSTART,
++		.active_low	= 0,
++	}, {
++		.name		= "ap83:green:power",
++		.gpio		= AP83_GPIO_LED_POWER,
++		.active_low	= 0,
++	}, {
++		.name		= "ap83:green:wlan",
++		.gpio		= AP83_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button ap83_gpio_keys[] __initdata = {
++	{
++		.desc		= "soft_reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP83_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "jumpstart",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP83_GPIO_BTN_JUMPSTART,
++		.active_low	= 1,
++	}
++};
++
++static struct resource ap83_040_spi_resources[] = {
++	[0] = {
++		.start	= AR71XX_SPI_BASE,
++		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct platform_device ap83_040_spi_device = {
++	.name		= "ap83-spi",
++	.id		= 0,
++	.resource	= ap83_040_spi_resources,
++	.num_resources	= ARRAY_SIZE(ap83_040_spi_resources),
++};
++
++static struct spi_gpio_platform_data ap83_050_spi_data = {
++	.miso	= AP83_050_GPIO_VSC7385_MISO,
++	.mosi	= AP83_050_GPIO_VSC7385_MOSI,
++	.sck	= AP83_050_GPIO_VSC7385_SCK,
++	.num_chipselect = 1,
++};
++
++static struct platform_device ap83_050_spi_device = {
++	.name		= "spi_gpio",
++	.id		= 0,
++	.dev		= {
++		.platform_data = &ap83_050_spi_data,
++	}
++};
++
++static void ap83_vsc7385_reset(void)
++{
++	ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++	udelay(10);
++	ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++	mdelay(50);
++}
++
++static struct vsc7385_platform_data ap83_vsc7385_data = {
++	.reset		= ap83_vsc7385_reset,
++	.ucode_name	= "vsc7385_ucode_ap83.bin",
++	.mac_cfg = {
++		.tx_ipg		= 6,
++		.bit2		= 0,
++		.clk_sel	= 3,
++	},
++};
++
++static struct spi_board_info ap83_spi_info[] = {
++	{
++		.bus_num	= 0,
++		.chip_select	= 0,
++		.max_speed_hz	= 25000000,
++		.modalias	= "spi-vsc7385",
++		.platform_data	= &ap83_vsc7385_data,
++		.controller_data = (void *) AP83_050_GPIO_VSC7385_CS,
++	}
++};
++
++static void __init ap83_generic_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_mdio(0, 0xfffffffe);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = 0x1;
++
++	ath79_register_eth(0);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_eth1_pll_data.pll_1000 = 0x1f000000;
++
++	ath79_register_eth(1);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
++					ap83_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(ap83_gpio_keys),
++					 ap83_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_wmac(eeprom, NULL);
++
++	platform_device_register(&ap83_flash_device);
++
++	spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
++}
++
++static void ap83_040_flash_lock(struct platform_device *pdev)
++{
++	ath79_flash_acquire();
++}
++
++static void ap83_040_flash_unlock(struct platform_device *pdev)
++{
++	ath79_flash_release();
++}
++
++static void __init ap83_040_setup(void)
++{
++	ap83_flash_data.lock = ap83_040_flash_lock;
++	ap83_flash_data.unlock = ap83_040_flash_unlock;
++	ap83_generic_setup();
++	platform_device_register(&ap83_040_spi_device);
++}
++
++static void __init ap83_050_setup(void)
++{
++	ap83_generic_setup();
++	platform_device_register(&ap83_050_spi_device);
++}
++
++static void __init ap83_setup(void)
++{
++	u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244);
++	unsigned int board_version;
++
++	board_version = (unsigned int)(board_id[0] - '0');
++	board_version += ((unsigned int)(board_id[1] - '0')) * 10;
++
++	switch (board_version) {
++	case 40:
++		ap83_040_setup();
++		break;
++	case 50:
++		ap83_050_setup();
++		break;
++	default:
++		printk(KERN_WARNING "AP83-%03u board is not yet supported\n",
++		       board_version);
++	}
++}
++
++MIPS_MACHINE(ATH79_MACH_AP83, "AP83", "Atheros AP83", ap83_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ap96.c linux-4.1.13/arch/mips/ath79/mach-ap96.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ap96.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ap96.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,142 @@
++/*
++ *  Atheros AP96 board support
++ *
++ *  Copyright (C) 2009 Marco Porsch
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2010 Atheros Communications
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define AP96_GPIO_LED_12_GREEN		0
++#define AP96_GPIO_LED_3_GREEN		1
++#define AP96_GPIO_LED_2_GREEN		2
++#define AP96_GPIO_LED_WPS_GREEN		4
++#define AP96_GPIO_LED_5_GREEN		5
++#define AP96_GPIO_LED_4_ORANGE		6
++
++/* Reset button - next to the power connector */
++#define AP96_GPIO_BTN_RESET		3
++/* WPS button - next to a led on right */
++#define AP96_GPIO_BTN_WPS		8
++
++#define AP96_KEYS_POLL_INTERVAL		20	/* msecs */
++#define AP96_KEYS_DEBOUNCE_INTERVAL	(3 * AP96_KEYS_POLL_INTERVAL)
++
++#define AP96_WMAC0_MAC_OFFSET		0x120c
++#define AP96_WMAC1_MAC_OFFSET		0x520c
++#define AP96_CALDATA0_OFFSET		0x1000
++#define AP96_CALDATA1_OFFSET		0x5000
++
++/*
++ * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12
++ * below (from left to right on the board). Led 1 seems to be on whenever the
++ * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange;
++ * others are green.
++ *
++ * In addition, there is one led next to a button on the right side for WPS.
++ */
++static struct gpio_led ap96_leds_gpio[] __initdata = {
++	{
++		.name		= "ap96:green:led2",
++		.gpio		= AP96_GPIO_LED_2_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "ap96:green:led3",
++		.gpio		= AP96_GPIO_LED_3_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "ap96:orange:led4",
++		.gpio		= AP96_GPIO_LED_4_ORANGE,
++		.active_low	= 1,
++	}, {
++		.name		= "ap96:green:led5",
++		.gpio		= AP96_GPIO_LED_5_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "ap96:green:led12",
++		.gpio		= AP96_GPIO_LED_12_GREEN,
++		.active_low	= 1,
++	}, { /* next to a button on right */
++		.name		= "ap96:green:wps",
++		.gpio		= AP96_GPIO_LED_WPS_GREEN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button ap96_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP96_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AP96_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++#define AP96_WAN_PHYMASK 0x10
++#define AP96_LAN_PHYMASK 0x0f
++
++static void __init ap96_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK;
++
++	ath79_eth1_pll_data.pll_1000 = 0x1f000000;
++
++	ath79_register_eth(1);
++
++	ath79_register_usb();
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio),
++					ap96_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(ap96_gpio_keys),
++					 ap96_gpio_keys);
++
++	ap94_pci_init(art + AP96_CALDATA0_OFFSET,
++		      art + AP96_WMAC0_MAC_OFFSET,
++		      art + AP96_CALDATA1_OFFSET,
++		      art + AP96_WMAC1_MAC_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-archer-c7.c linux-4.1.13/arch/mips/ath79/mach-archer-c7.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-archer-c7.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-archer-c7.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,266 @@
++/*
++ * TP-LINK Archer C5/C7/TL-WDR4900 v2 board support
++ *
++ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (c) 2014 施康成 <tenninjas@tenninjas.ca>
++ * Copyright (c) 2014 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
++ *   Copyright (c) 2012 Qualcomm Atheros
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define ARCHER_C7_GPIO_LED_WLAN2G	12
++#define ARCHER_C7_GPIO_LED_SYSTEM	14
++#define ARCHER_C7_GPIO_LED_QSS		15
++#define ARCHER_C7_GPIO_LED_WLAN5G	17
++#define ARCHER_C7_GPIO_LED_USB1		18
++#define ARCHER_C7_GPIO_LED_USB2		19
++
++#define ARCHER_C7_GPIO_BTN_RFKILL	13
++#define ARCHER_C7_GPIO_BTN_RESET	16
++
++#define ARCHER_C7_GPIO_USB1_POWER	22
++#define ARCHER_C7_GPIO_USB2_POWER	21
++
++#define ARCHER_C7_KEYS_POLL_INTERVAL	20	/* msecs */
++#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
++
++#define ARCHER_C7_WMAC_CALDATA_OFFSET	0x1000
++#define ARCHER_C7_PCIE_CALDATA_OFFSET	0x5000
++
++static const char *archer_c7_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data archer_c7_flash_data = {
++	.part_probes	= archer_c7_part_probes,
++};
++
++static struct gpio_led archer_c7_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:blue:qss",
++		.gpio		= ARCHER_C7_GPIO_LED_QSS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:system",
++		.gpio		= ARCHER_C7_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:wlan2g",
++		.gpio		= ARCHER_C7_GPIO_LED_WLAN2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:wlan5g",
++		.gpio		= ARCHER_C7_GPIO_LED_WLAN5G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:usb1",
++		.gpio		= ARCHER_C7_GPIO_LED_USB1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:usb2",
++		.gpio		= ARCHER_C7_GPIO_LED_USB2,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button archer_c7_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ARCHER_C7_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "RFKILL switch",
++		.type		= EV_SW,
++		.code		= KEY_RFKILL,
++		.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ARCHER_C7_GPIO_BTN_RFKILL,
++	},
++};
++
++static const struct ar8327_led_info archer_c7_leds_ar8327[] __initconst = {
++	AR8327_LED_INFO(PHY0_0, HW, "tp-link:blue:wan"),
++	AR8327_LED_INFO(PHY1_0, HW, "tp-link:blue:lan1"),
++	AR8327_LED_INFO(PHY2_0, HW, "tp-link:blue:lan2"),
++	AR8327_LED_INFO(PHY3_0, HW, "tp-link:blue:lan3"),
++	AR8327_LED_INFO(PHY4_0, HW, "tp-link:blue:lan4"),
++};
++
++/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
++static struct ar8327_pad_cfg archer_c7_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_SGMII,
++	.sgmii_delay_en = true,
++};
++
++/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
++static struct ar8327_pad_cfg archer_c7_ar8327_pad6_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_led_cfg archer_c7_ar8327_led_cfg = {
++	.led_ctrl0 = 0xc737c737,
++	.led_ctrl1 = 0x00000000,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x0030c300,
++	.open_drain = false,
++};
++
++static struct ar8327_platform_data archer_c7_ar8327_data = {
++	.pad0_cfg = &archer_c7_ar8327_pad0_cfg,
++	.pad6_cfg = &archer_c7_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &archer_c7_ar8327_led_cfg,
++	.num_leds = ARRAY_SIZE(archer_c7_leds_ar8327),
++	.leds = archer_c7_leds_ar8327,
++};
++
++static struct mdio_board_info archer_c7_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &archer_c7_ar8327_data,
++	},
++};
++
++static void __init common_setup(bool pcie_slot)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(&archer_c7_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio),
++				 archer_c7_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(archer_c7_gpio_keys),
++					archer_c7_gpio_keys);
++
++	ath79_init_mac(tmpmac, mac, -1);
++	ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, tmpmac);
++
++	if (pcie_slot) {
++		ath79_register_pci();
++	} else {
++		ath79_init_mac(tmpmac, mac, -1);
++		ap9x_pci_setup_wmac_led_pin(0, 0);
++		ap91_pci_init(art + ARCHER_C7_PCIE_CALDATA_OFFSET, tmpmac);
++	}
++
++	mdiobus_register_board_info(archer_c7_mdio0_info,
++				    ARRAY_SIZE(archer_c7_mdio0_info));
++	ath79_register_mdio(0, 0x0);
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x56000000;
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++	ath79_register_eth(1);
++
++	gpio_request_one(ARCHER_C7_GPIO_USB1_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB1 power");
++	gpio_request_one(ARCHER_C7_GPIO_USB2_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB2 power");
++	ath79_register_usb();
++}
++
++static void __init archer_c5_setup(void)
++{
++	common_setup(true);
++}
++
++MIPS_MACHINE(ATH79_MACH_ARCHER_C5, "ARCHER-C5", "TP-LINK Archer C5",
++	     archer_c5_setup);
++
++static void __init archer_c7_setup(void)
++{
++	common_setup(true);
++}
++
++MIPS_MACHINE(ATH79_MACH_ARCHER_C7, "ARCHER-C7", "TP-LINK Archer C7",
++	     archer_c7_setup);
++
++static void __init tl_wdr4900_v2_setup(void)
++{
++	common_setup(false);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WDR4900_V2, "TL-WDR4900-v2", "TP-LINK TL-WDR4900 v2",
++	     tl_wdr4900_v2_setup)
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-arduino-yun.c linux-4.1.13/arch/mips/ath79/mach-arduino-yun.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-arduino-yun.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-arduino-yun.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,137 @@
++/*
++ *  Arduino Yun support
++ *
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include "common.h"
++#include "gpio.h"
++#include "linux/gpio.h"
++
++// Uncomment to have reset on gpio18 instead of gipo7
++#define DS2_B
++
++#define DS_GPIO_LED_WLAN		0
++#define DS_GPIO_LED_USB			1
++
++#define DS_GPIO_OE			21
++#define DS_GPIO_AVR_RESET		18
++
++// Maintained to have the console in the previous version of DS2 working
++#define DS_GPIO_AVR_RESET_DS2		7
++
++#define DS_GPIO_OE2			22
++#define DS_GPIO_UART_ENA		23
++#define DS_GPIO_CONF_BTN		20
++
++#define DS_KEYS_POLL_INTERVAL		20	/* msecs */
++#define DS_KEYS_DEBOUNCE_INTERVAL	(3 * DS_KEYS_POLL_INTERVAL)
++
++#define DS_MAC0_OFFSET			0x0000
++#define DS_MAC1_OFFSET			0x0006
++#define DS_CALDATA_OFFSET		0x1000
++#define DS_WMAC_MAC_OFFSET		0x1002
++
++
++static struct gpio_led ds_leds_gpio[] __initdata = {
++	{
++		.name		= "arduino:white:usb",
++		.gpio		= DS_GPIO_LED_USB,
++		.active_low	= 0,
++	},
++	{
++		.name		= "arduino:blue:wlan",
++		.gpio		= DS_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},
++};
++
++static void __init ds_common_setup(void)
++{
++	static u8 mac[6];
++
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	ath79_register_m25p80(NULL);
++
++	if (ar93xx_wmac_read_mac_address(mac)) {
++		ath79_register_wmac(NULL, NULL);
++	} else {
++		ath79_register_wmac(art + DS_CALDATA_OFFSET,
++				    art + DS_WMAC_MAC_OFFSET);
++		memcpy(mac, art + DS_WMAC_MAC_OFFSET, sizeof(mac));
++	}
++
++	mac[3] |= 0x08;
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++
++	mac[3] &= 0xF7;
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++
++	/* WAN port */
++	ath79_register_eth(0);
++}
++
++static void __init ds_setup(void)
++{
++	u32 t;
++
++	ds_common_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ds_leds_gpio),
++				 ds_leds_gpio);
++	ath79_register_usb();
++
++	//Disable the Function for some pins to have GPIO functionality active
++	// GPIO6-7-8 and GPIO11
++	ath79_gpio_function_setup(AR933X_GPIO_FUNC_JTAG_DISABLE | AR933X_GPIO_FUNC_I2S_MCK_EN, 0);
++
++	ath79_gpio_function2_setup(AR933X_GPIO_FUNC2_JUMPSTART_DISABLE, 0);
++
++	printk("Setting DogStick2 GPIO\n");
++
++	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
++	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
++
++	// Put the avr reset to high 
++	if (gpio_request_one(DS_GPIO_AVR_RESET_DS2,
++	    GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
++		printk("Error setting GPIO OE\n");
++	gpio_unexport(DS_GPIO_AVR_RESET_DS2);
++	gpio_free(DS_GPIO_AVR_RESET_DS2);
++
++	// enable OE of level shifter
++	if (gpio_request_one(DS_GPIO_OE,
++	    GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
++		printk("Error setting GPIO OE\n");
++
++	if (gpio_request_one(DS_GPIO_UART_ENA,
++	    GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "UART-ENA") != 0)
++		printk("Error setting GPIO Uart Enable\n");
++
++	// enable OE of level shifter
++	if (gpio_request_one(DS_GPIO_OE2,
++	    GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-2") != 0)
++		printk("Error setting GPIO OE2\n");
++}
++
++MIPS_MACHINE(ATH79_MACH_ARDUINO_YUN, "Yun", "Arduino Yun", ds_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-aw-nr580.c linux-4.1.13/arch/mips/ath79/mach-aw-nr580.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-aw-nr580.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-aw-nr580.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,107 @@
++/*
++ *  AzureWave AW-NR580 board support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-m25p80.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define AW_NR580_GPIO_LED_READY_RED	0
++#define AW_NR580_GPIO_LED_WLAN		1
++#define AW_NR580_GPIO_LED_READY_GREEN	2
++#define AW_NR580_GPIO_LED_WPS_GREEN	4
++#define AW_NR580_GPIO_LED_WPS_AMBER	5
++
++#define AW_NR580_GPIO_BTN_WPS		3
++#define AW_NR580_GPIO_BTN_RESET		11
++
++#define AW_NR580_KEYS_POLL_INTERVAL	20	/* msecs */
++#define AW_NR580_KEYS_DEBOUNCE_INTERVAL	(3 * AW_NR580_KEYS_POLL_INTERVAL)
++
++static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
++	{
++		.name		= "aw-nr580:red:ready",
++		.gpio		= AW_NR580_GPIO_LED_READY_RED,
++		.active_low	= 0,
++	}, {
++		.name		= "aw-nr580:green:ready",
++		.gpio		= AW_NR580_GPIO_LED_READY_GREEN,
++		.active_low	= 0,
++	}, {
++		.name		= "aw-nr580:green:wps",
++		.gpio		= AW_NR580_GPIO_LED_WPS_GREEN,
++		.active_low	= 0,
++	}, {
++		.name		= "aw-nr580:amber:wps",
++		.gpio		= AW_NR580_GPIO_LED_WPS_AMBER,
++		.active_low	= 0,
++	}, {
++		.name		= "aw-nr580:green:wlan",
++		.gpio		= AW_NR580_GPIO_LED_WLAN,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AW_NR580_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= AW_NR580_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static const char *aw_nr580_part_probes[] = {
++	"RedBoot",
++	NULL,
++};
++
++static struct flash_platform_data aw_nr580_flash_data = {
++	.part_probes	= aw_nr580_part_probes,
++};
++
++static void __init aw_nr580_setup(void)
++{
++	ath79_register_mdio(0, 0x0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++
++	ath79_register_pci();
++
++	ath79_register_m25p80(&aw_nr580_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
++				 aw_nr580_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(aw_nr580_gpio_keys),
++					aw_nr580_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580",
++	     aw_nr580_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-bhu-bxu2000n2-a.c linux-4.1.13/arch/mips/ath79/mach-bhu-bxu2000n2-a.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-bhu-bxu2000n2-a.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-bhu-bxu2000n2-a.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,120 @@
++/*
++ *  BHU BXU2000n-2 A1 board support
++ *
++ *  Copyright (C) 2013 Terry Yang <yangbo@bhunetworks.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define BHU_BXU2000N2_A1_GPIO_LED_WLAN		13
++#define BHU_BXU2000N2_A1_GPIO_LED_WAN		19
++#define BHU_BXU2000N2_A1_GPIO_LED_LAN		21
++#define BHU_BXU2000N2_A1_GPIO_LED_SYSTEM	14
++
++#define BHU_BXU2000N2_A1_GPIO_BTN_RESET		17
++
++#define BHU_BXU2000N2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL	\
++	(3 * BHU_BXU2000N2_KEYS_POLL_INTERVAL)
++
++static const char *bhu_bxu2000n2_part_probes[] = {
++	"cmdlinepart",
++	NULL,
++};
++
++static struct flash_platform_data bhu_bxu2000n2_flash_data = {
++	.part_probes	= bhu_bxu2000n2_part_probes,
++};
++
++static struct gpio_led bhu_bxu2000n2_a1_leds_gpio[] __initdata = {
++	{
++		.name		= "bhu:green:status",
++		.gpio		= BHU_BXU2000N2_A1_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "bhu:green:lan",
++		.gpio		= BHU_BXU2000N2_A1_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "bhu:green:wan",
++		.gpio		= BHU_BXU2000N2_A1_GPIO_LED_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "bhu:green:wlan",
++		.gpio		= BHU_BXU2000N2_A1_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button bhu_bxu2000n2_a1_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= BHU_BXU2000N2_A1_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static void __init bhu_ap123_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(&bhu_bxu2000n2_flash_data);
++
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++
++	/* GMAC0 is connected to the PHY4 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch. Only use PHY3 */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.phy_mask = BIT(3);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, ee+2);
++}
++
++static void __init bhu_bxu2000n2_a1_setup(void)
++{
++	bhu_ap123_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxu2000n2_a1_leds_gpio),
++				 bhu_bxu2000n2_a1_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, BHU_BXU2000N2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(bhu_bxu2000n2_a1_gpio_keys),
++					bhu_bxu2000n2_a1_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_BHU_BXU2000N2_A1, "BXU2000n-2-A1",
++	     "BHU BXU2000n-2 rev. A1",
++	     bhu_bxu2000n2_a1_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-bsb.c linux-4.1.13/arch/mips/ath79/mach-bsb.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-bsb.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-bsb.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,83 @@
++/*
++ *  Smart Electronics Black Swift board support
++ *
++ *  Copyright (C) 2014 Dmitriy Zherebkov dzh@black-swift.com
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define BSB_GPIO_LED_SYS		27
++
++#define BSB_GPIO_BTN_RESET		11
++
++#define BSB_KEYS_POLL_INTERVAL		20	/* msecs */
++#define BSB_KEYS_DEBOUNCE_INTERVAL	(3 * BSB_KEYS_POLL_INTERVAL)
++
++#define BSB_MAC_OFFSET			0x0000
++#define BSB_CALDATA_OFFSET		0x1000
++
++static struct gpio_led bsb_leds_gpio[] __initdata = {
++	{
++		.name		= "bsb:red:sys",
++		.gpio		= BSB_GPIO_LED_SYS,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button bsb_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = BSB_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= BSB_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static void __init bsb_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false,false);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(bsb_leds_gpio),
++				 bsb_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, BSB_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(bsb_gpio_keys),
++					bsb_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_m25p80(NULL);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + BSB_MAC_OFFSET, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + BSB_MAC_OFFSET, 2);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(art + BSB_CALDATA_OFFSET,
++			    art + BSB_MAC_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_BSB, "BSB", "Smart Electronics Black Swift board",
++		bsb_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-cap4200ag.c linux-4.1.13/arch/mips/ath79/mach-cap4200ag.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-cap4200ag.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-cap4200ag.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,131 @@
++/*
++ *  Senao CAP4200AG board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define CAP4200AG_GPIO_LED_PWR_GREEN	12
++#define CAP4200AG_GPIO_LED_PWR_AMBER	13
++#define CAP4200AG_GPIO_LED_LAN_GREEN	14
++#define CAP4200AG_GPIO_LED_LAN_AMBER	15
++#define CAP4200AG_GPIO_LED_WLAN_GREEN	18
++#define CAP4200AG_GPIO_LED_WLAN_AMBER	19
++
++#define CAP4200AG_GPIO_BTN_RESET	17
++
++#define CAP4200AG_KEYS_POLL_INTERVAL	20	/* msecs */
++#define CAP4200AG_KEYS_DEBOUNCE_INTERVAL (3 * CAP4200AG_KEYS_POLL_INTERVAL)
++
++#define CAP4200AG_MAC_OFFSET		0
++#define CAP4200AG_WMAC_CALDATA_OFFSET	0x1000
++#define CAP4200AG_PCIE_CALDATA_OFFSET	0x5000
++
++static struct gpio_led cap4200ag_leds_gpio[] __initdata = {
++	{
++		.name		= "senao:green:pwr",
++		.gpio		= CAP4200AG_GPIO_LED_PWR_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "senao:amber:pwr",
++		.gpio		= CAP4200AG_GPIO_LED_PWR_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "senao:green:lan",
++		.gpio		= CAP4200AG_GPIO_LED_LAN_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "senao:amber:lan",
++		.gpio		= CAP4200AG_GPIO_LED_LAN_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "senao:green:wlan",
++		.gpio		= CAP4200AG_GPIO_LED_WLAN_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "senao:amber:wlan",
++		.gpio		= CAP4200AG_GPIO_LED_WLAN_AMBER,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button cap4200ag_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = CAP4200AG_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= CAP4200AG_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static void __init cap4200ag_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 mac[6];
++
++	ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_GREEN,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_AMBER,
++				 AR934X_GPIO_OUT_GPIO);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(cap4200ag_leds_gpio),
++				 cap4200ag_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, CAP4200AG_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(cap4200ag_gpio_keys),
++					cap4200ag_gpio_keys);
++
++	ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -1);
++	ath79_wmac_disable_2ghz();
++	ath79_register_wmac(art + CAP4200AG_WMAC_CALDATA_OFFSET, mac);
++
++	ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -2);
++	ap91_pci_init(art + CAP4200AG_PCIE_CALDATA_OFFSET, mac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       art + CAP4200AG_MAC_OFFSET, -2);
++
++	/* GMAC0 is connected to an external PHY */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_CAP4200AG, "CAP4200AG", "Senao CAP4200AG",
++	     cap4200ag_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-carambola2.c linux-4.1.13/arch/mips/ath79/mach-carambola2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-carambola2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-carambola2.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,105 @@
++/*
++ *  8devices Carambola2 board support
++ *
++ *  Copyright (C) 2013 Darius Augulis <darius@8devices.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define CARAMBOLA2_GPIO_LED_WLAN		0
++#define CARAMBOLA2_GPIO_LED_ETH0		14
++#define CARAMBOLA2_GPIO_LED_ETH1		13
++
++#define CARAMBOLA2_GPIO_BTN_JUMPSTART		11
++
++#define CARAMBOLA2_KEYS_POLL_INTERVAL		20	/* msecs */
++#define CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL	(3 * CARAMBOLA2_KEYS_POLL_INTERVAL)
++
++#define CARAMBOLA2_MAC0_OFFSET			0x0000
++#define CARAMBOLA2_MAC1_OFFSET			0x0006
++#define CARAMBOLA2_CALDATA_OFFSET		0x1000
++#define CARAMBOLA2_WMAC_MAC_OFFSET		0x1002
++
++static struct gpio_led carambola2_leds_gpio[] __initdata = {
++	{
++		.name		= "carambola2:green:wlan",
++		.gpio		= CARAMBOLA2_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}, {
++		.name		= "carambola2:orange:eth0",
++		.gpio		= CARAMBOLA2_GPIO_LED_ETH0,
++		.active_low	= 0,
++	}, {
++		.name		= "carambola2:orange:eth1",
++		.gpio		= CARAMBOLA2_GPIO_LED_ETH1,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button carambola2_gpio_keys[] __initdata = {
++	{
++		.desc		= "jumpstart button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= CARAMBOLA2_GPIO_BTN_JUMPSTART,
++		.active_low	= 1,
++	},
++};
++
++static void __init carambola2_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_wmac(art + CARAMBOLA2_CALDATA_OFFSET,
++			    art + CARAMBOLA2_WMAC_MAC_OFFSET);
++
++	ath79_setup_ar933x_phy4_switch(true, true);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + CARAMBOLA2_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + CARAMBOLA2_MAC1_OFFSET, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++
++	/* WAN port */
++	ath79_register_eth(0);
++}
++
++static void __init carambola2_setup(void)
++{
++	carambola2_common_setup();
++
++	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(carambola2_leds_gpio),
++				 carambola2_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, CARAMBOLA2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(carambola2_gpio_keys),
++					carambola2_gpio_keys);
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_CARAMBOLA2, "CARAMBOLA2", "8devices Carambola2 board",
++		carambola2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-cf-e316n-v2.c linux-4.1.13/arch/mips/ath79/mach-cf-e316n-v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-cf-e316n-v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-cf-e316n-v2.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,132 @@
++/*
++ *  COMFAST CF-E316N v2
++ *  by Shenzhen Four Seas Global Link Network Technology Co., Ltd
++ *
++ *  aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
++ *
++ *  Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/timer.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
++	{
++		.name		= "cf-e316n-v2:blue:diag",
++		.gpio		= 0,
++		.active_low	= 0,
++	}, {
++		.name		= "cf-e316n-v2:red:diag",
++		.gpio		= 2,
++		.active_low	= 0,
++	}, {
++		.name		= "cf-e316n-v2:green:diag",
++		.gpio		= 3,
++		.active_low	= 0,
++	}, {
++		.name		= "cf-e316n-v2:blue:wlan",
++		.gpio		= 12,
++		.active_low	= 1,
++	}, {
++		.name		= "cf-e316n-v2:blue:wan",
++		.gpio		= 17,
++		.active_low	= 1,
++	}, {
++		.name		= "cf-e316n-v2:blue:lan",
++		.gpio		= 19,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = 60,
++		.gpio		= 20,
++		.active_low	= 1,
++	},
++};
++
++/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */
++#define EXT_WATCHDOG_GPIO	16
++static struct timer_list gpio_wdt_timer;
++
++static void gpio_wdt_toggle(unsigned long period)
++{
++	static int state;
++	state = !state;
++	gpio_set_value(EXT_WATCHDOG_GPIO, state);
++	mod_timer(&gpio_wdt_timer, jiffies + period);
++}
++
++static void __init cf_e316n_v2_setup(void)
++{
++	u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
++	u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
++	u8 tmpmac[ETH_ALEN];
++
++	gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
++	gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
++	setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
++	gpio_wdt_toggle(msecs_to_jiffies(1));
++
++	ath79_register_m25p80(NULL);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
++	ath79_register_mdio(1, 0x0);
++
++	/* GMAC0 is connected to the PHY0 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2);
++	ath79_register_eth(1);
++
++	/* Enable 2x Skyworks SE2576L WLAN power amplifiers */
++	gpio_request(13, "RF Amp 1");
++	gpio_direction_output(13, 1);
++	gpio_request(14, "RF Amp 2");
++	gpio_direction_output(14, 1);
++	ath79_init_mac(tmpmac, macwlan, 0);
++	ath79_register_wmac(ee, tmpmac);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
++				 cf_e316n_v2_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, 20,
++					ARRAY_SIZE(cf_e316n_v2_gpio_keys),
++					cf_e316n_v2_gpio_keys);
++
++	/* J1 is a High-Speed USB port, pin 1 is Vcc */
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
++	     cf_e316n_v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-cpe510.c linux-4.1.13/arch/mips/ath79/mach-cpe510.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-cpe510.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-cpe510.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,107 @@
++/*
++ *  TP-LINK CPE210/220/510/520 board support
++ *
++ *  Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++
++#define CPE510_GPIO_LED_LAN0	11
++#define CPE510_GPIO_LED_LAN1	12
++#define CPE510_GPIO_LED_L1	13
++#define CPE510_GPIO_LED_L2	14
++#define CPE510_GPIO_LED_L3	15
++#define CPE510_GPIO_LED_L4	16
++
++#define CPE510_GPIO_BTN_RESET	4
++
++#define CPE510_KEYS_POLL_INTERVAL	20 /* msecs */
++#define CPE510_KEYS_DEBOUNCE_INTERVAL	(3 * CPE510_KEYS_POLL_INTERVAL)
++
++
++static struct gpio_led cpe510_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan0",
++		.gpio		= CPE510_GPIO_LED_LAN0,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan1",
++		.gpio		= CPE510_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:link1",
++		.gpio		= CPE510_GPIO_LED_L1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:link2",
++		.gpio		= CPE510_GPIO_LED_L2,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:link3",
++		.gpio		= CPE510_GPIO_LED_L3,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:link4",
++		.gpio		= CPE510_GPIO_LED_L4,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= CPE510_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++
++static void __init cpe510_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* Disable JTAG, enabling GPIOs 0-3 */
++	/* Configure OBS4 line, for GPIO 4*/
++	ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
++				  AR934X_GPIO_FUNC_CLK_OBS4_EN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
++				 cpe510_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, CPE510_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(cpe510_gpio_keys),
++					cpe510_gpio_keys);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE210/220/510/520",
++	     cpe510_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-db120.c linux-4.1.13/arch/mips/ath79/mach-db120.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-db120.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-db120.c	2015-12-04 19:57:04.322082119 +0100
+@@ -2,7 +2,7 @@
+  * Atheros DB120 reference board support
+  *
+  * Copyright (c) 2011 Qualcomm Atheros
+- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  * Permission to use, copy, modify, and/or distribute this software for any
+  * purpose with or without fee is hereby granted, provided that the above
+@@ -19,16 +19,26 @@
+  */
+ 
+ #include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+ 
++#define DB120_GPIO_LED_USB		11
+ #define DB120_GPIO_LED_WLAN_5G		12
+ #define DB120_GPIO_LED_WLAN_2G		13
+ #define DB120_GPIO_LED_STATUS		14
+@@ -39,8 +49,10 @@
+ #define DB120_KEYS_POLL_INTERVAL	20	/* msecs */
+ #define DB120_KEYS_DEBOUNCE_INTERVAL	(3 * DB120_KEYS_POLL_INTERVAL)
+ 
+-#define DB120_WMAC_CALDATA_OFFSET 0x1000
+-#define DB120_PCIE_CALDATA_OFFSET 0x5000
++#define DB120_MAC0_OFFSET		0
++#define DB120_MAC1_OFFSET		6
++#define DB120_WMAC_CALDATA_OFFSET	0x1000
++#define DB120_PCIE_CALDATA_OFFSET	0x5000
+ 
+ static struct gpio_led db120_leds_gpio[] __initdata = {
+ 	{
+@@ -63,6 +75,11 @@
+ 		.gpio		= DB120_GPIO_LED_WLAN_2G,
+ 		.active_low	= 1,
+ 	},
++	{
++		.name		= "db120:green:usb",
++		.gpio		= DB120_GPIO_LED_USB,
++		.active_low	= 1,
++	}
+ };
+ 
+ static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+@@ -76,60 +93,85 @@
+ 	},
+ };
+ 
+-static struct spi_board_info db120_spi_info[] = {
+-	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "s25sl064a",
+-	}
++static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ };
+ 
+-static struct ath79_spi_platform_data db120_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect = 1,
++static struct ar8327_led_cfg db120_ar8327_led_cfg = {
++	.led_ctrl0 = 0x00000000,
++	.led_ctrl1 = 0xc737c737,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x00c30c00,
++	.open_drain = true,
+ };
+ 
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data db120_ath9k_data;
+-
+-static int db120_pci_plat_dev_init(struct pci_dev *dev)
+-{
+-	switch (PCI_SLOT(dev->devfn)) {
+-	case 0:
+-		dev->dev.platform_data = &db120_ath9k_data;
+-		break;
+-	}
+-
+-	return 0;
+-}
+-
+-static void __init db120_pci_init(u8 *eeprom)
+-{
+-	memcpy(db120_ath9k_data.eeprom_data, eeprom,
+-	       sizeof(db120_ath9k_data.eeprom_data));
++static struct ar8327_platform_data db120_ar8327_data = {
++	.pad0_cfg = &db120_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &db120_ar8327_led_cfg,
++};
+ 
+-	ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+-	ath79_register_pci();
+-}
+-#else
+-static inline void db120_pci_init(u8 *eeprom) {}
+-#endif /* CONFIG_PCI */
++static struct mdio_board_info db120_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &db120_ar8327_data,
++	},
++};
+ 
+ static void __init db120_setup(void)
+ {
+ 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ 
++	ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
++	ath79_register_m25p80(NULL);
++
+ 	ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+ 				 db120_leds_gpio);
+ 	ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+ 					ARRAY_SIZE(db120_gpio_keys),
+ 					db120_gpio_keys);
+-	ath79_register_spi(&db120_spi_data, db120_spi_info,
+-			   ARRAY_SIZE(db120_spi_info));
+ 	ath79_register_usb();
+-	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
+-	db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
++	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
++
++	mdiobus_register_board_info(db120_mdio0_info,
++				    ARRAY_SIZE(db120_mdio0_info));
++
++	/* GMAC0 is connected to an AR8327 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(1);
++
++	ath79_register_nfc();
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dgl-5500-a1.c linux-4.1.13/arch/mips/ath79/mach-dgl-5500-a1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dgl-5500-a1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dgl-5500-a1.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,150 @@
++/*
++ *  D-Link DGL-5500 board support
++ *
++ *  Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DGL_5500_A1_GPIO_LED_POWER_ORANGE	14
++#define DGL_5500_A1_GPIO_LED_POWER_GREEN	19
++#define DGL_5500_A1_GPIO_LED_PLANET_GREEN	22
++#define DGL_5500_A1_GPIO_LED_PLANET_ORANGE	23
++
++#define DGL_5500_A1_GPIO_BTN_WPS		16
++#define DGL_5500_A1_GPIO_BTN_RESET		17
++
++#define DGL_5500_A1_KEYS_POLL_INTERVAL		20	/* msecs */
++#define DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL	\
++					(3 * DGL_5500_A1_KEYS_POLL_INTERVAL)
++
++#define DGL_5500_A1_WMAC_CALDATA_OFFSET		0x1000
++
++#define DGL_5500_A1_LAN_MAC_OFFSET	0x04
++#define DGL_5500_A1_WAN_MAC_OFFSET	0x16
++
++static struct gpio_led dgl_5500_a1_leds_gpio[] __initdata = {
++	{
++		.name		= "d-link:green:power",
++		.gpio		= DGL_5500_A1_GPIO_LED_POWER_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:orange:power",
++		.gpio		= DGL_5500_A1_GPIO_LED_POWER_ORANGE,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:green:planet",
++		.gpio		= DGL_5500_A1_GPIO_LED_PLANET_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:orange:planet",
++		.gpio		= DGL_5500_A1_GPIO_LED_PLANET_ORANGE,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button dgl_5500_a1_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DGL_5500_A1_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DGL_5500_A1_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg dgl_5500_a1_ar8327_pad0_cfg = {
++	/* Use the SGMII interface for the GMAC0 of the AR8327 switch */
++	.mode = AR8327_PAD_MAC_SGMII,
++	.sgmii_delay_en = true,
++};
++
++static struct ar8327_platform_data dgl_5500_a1_ar8327_data = {
++	.pad0_cfg = &dgl_5500_a1_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info dgl_5500_a1_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &dgl_5500_a1_ar8327_data,
++	},
++};
++
++static void __init dgl_5500_a1_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 lan_mac[ETH_ALEN];
++
++	ath79_parse_ascii_mac(mac + DGL_5500_A1_LAN_MAC_OFFSET, lan_mac);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dgl_5500_a1_leds_gpio),
++				 dgl_5500_a1_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, DGL_5500_A1_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dgl_5500_a1_gpio_keys),
++					dgl_5500_a1_gpio_keys);
++
++	ath79_register_wmac(art + DGL_5500_A1_WMAC_CALDATA_OFFSET, lan_mac);
++
++	ath79_register_mdio(0, 0x0);
++	mdiobus_register_board_info(dgl_5500_a1_mdio0_info,
++				    ARRAY_SIZE(dgl_5500_a1_mdio0_info));
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
++
++	/* GMAC1 is connected to an AR8327N switch via the SMGII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.phy_mask = BIT(0);
++	ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ath79_register_eth(1);
++
++	ath79_register_usb();
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_DGL_5500_A1, "DGL-5500-A1", "D-Link DGL-5500 rev. A1",
++	     dgl_5500_a1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dhp-1565-a1.c linux-4.1.13/arch/mips/ath79/mach-dhp-1565-a1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dhp-1565-a1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dhp-1565-a1.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,170 @@
++/*
++ *  D-Link DHP-1565 rev. A1 board support
++ *
++ *  Copyright (C) 2014 Jacek Kikiewicz
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DHP1565A1_GPIO_LED_BLUE_USB		11
++#define DHP1565A1_GPIO_LED_AMBER_POWER		14
++#define DHP1565A1_GPIO_LED_BLUE_POWER		22
++#define DHP1565A1_GPIO_LED_BLUE_WPS		15
++#define DHP1565A1_GPIO_LED_AMBER_PLANET		19
++#define DHP1565A1_GPIO_LED_BLUE_PLANET		18
++#define DHP1565A1_GPIO_LED_WLAN_2G		13
++
++#define DHP1565A1_GPIO_WAN_LED_ENABLE		20
++
++#define DHP1565A1_GPIO_BTN_RESET			17
++#define DHP1565A1_GPIO_BTN_WPS			16
++
++#define DHP1565A1_KEYS_POLL_INTERVAL		20	/* msecs */
++#define DHP1565A1_KEYS_DEBOUNCE_INTERVAL		(3 * DHP1565A1_KEYS_POLL_INTERVAL)
++
++#define DHP1565A1_MAC0_OFFSET			0xFFA0
++#define DHP1565A1_MAC1_OFFSET			0xFFB4
++#define DHP1565A1_WMAC0_OFFSET			0x5
++#define DHP1565A1_WMAC_CALDATA_OFFSET		0x1000
++#define DHP1565A1_PCIE_CALDATA_OFFSET		0x5000
++
++static struct gpio_led dhp1565a1_leds_gpio[] __initdata = {
++	{
++		.name		= "d-link:amber:power",
++		.gpio		= DHP1565A1_GPIO_LED_AMBER_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:green:power",
++		.gpio		= DHP1565A1_GPIO_LED_BLUE_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:amber:planet",
++		.gpio		= DHP1565A1_GPIO_LED_AMBER_PLANET,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:green:planet",
++		.gpio		= DHP1565A1_GPIO_LED_BLUE_PLANET,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button dhp1565a1_gpio_keys[] __initdata = {
++	{
++		.desc		= "Soft reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DHP1565A1_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DHP1565A1_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg dhp1565a1_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data dhp1565a1_ar8327_data = {
++	.pad0_cfg = &dhp1565a1_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info dhp1565a1_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &dhp1565a1_ar8327_data,
++	},
++};
++
++static void __init dhp1565a1_generic_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
++	u8 wmac0[ETH_ALEN];
++
++	ath79_parse_ascii_mac(mac + DHP1565A1_MAC0_OFFSET, mac0);
++	ath79_parse_ascii_mac(mac + DHP1565A1_MAC1_OFFSET, mac1);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_gpio_keys_polled(-1, DHP1565A1_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dhp1565a1_gpio_keys),
++					dhp1565a1_gpio_keys);
++
++	ath79_init_mac(wmac0, mac0, 0);
++	ath79_register_wmac(art + DHP1565A1_WMAC_CALDATA_OFFSET, wmac0);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++
++	mdiobus_register_board_info(dhp1565a1_mdio0_info,
++				    ARRAY_SIZE(dhp1565a1_mdio0_info));
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 1);
++
++	/* GMAC0 is connected to an AR8327N switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++
++	ath79_register_usb();
++}
++
++static void __init dhp1565a1_setup(void)
++{
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dhp1565a1_leds_gpio),
++				 dhp1565a1_leds_gpio);
++
++	dhp1565a1_generic_setup();
++}
++
++MIPS_MACHINE(ATH79_MACH_DHP_1565_A1, "DHP-1565-A1",
++	     "D-Link DHP-1565 rev. A1",
++	     dhp1565a1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dir-505-a1.c linux-4.1.13/arch/mips/ath79/mach-dir-505-a1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dir-505-a1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dir-505-a1.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,116 @@
++/*
++ *  DLink DIR-505 A1 board support
++ *
++ *  Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define DIR_505A1_GPIO_BTN_WPS         11 /* verify */
++#define DIR_505A1_GPIO_BTN_RESET       12 /* verify */
++
++#define DIR_505A1_GPIO_LED_RED         26 /* unused, fyi */
++#define DIR_505A1_GPIO_LED_GREEN       27
++
++#define DIR_505A1_GPIO_WAN_LED_ENABLE  1
++
++#define DIR_505A1_KEYS_POLL_INTERVAL   20      /* msecs */
++#define DIR_505A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_505A1_KEYS_POLL_INTERVAL)
++
++#define DIR_505A1_ART_ADDRESS          0x1f010000
++#define DIR_505A1_CALDATA_OFFSET       0x1000
++
++#define DIR_505A1_MAC_PART_ADDRESS	0x1f020000
++#define DIR_505A1_LAN_MAC_OFFSET	0x04
++#define DIR_505A1_WAN_MAC_OFFSET	0x16
++
++static struct gpio_led dir_505_a1_leds_gpio[] __initdata = {
++	{
++		.name		= "d-link:green:power",
++		.gpio		= DIR_505A1_GPIO_LED_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:red:status",
++		.gpio		= DIR_505A1_GPIO_LED_RED,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button dir_505_a1_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR_505A1_GPIO_BTN_RESET,
++		.active_low	= 0,
++	}, {
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR_505A1_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static void __init dir_505_a1_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(DIR_505A1_ART_ADDRESS);
++	u8 *mac = (u8 *) KSEG1ADDR(DIR_505A1_MAC_PART_ADDRESS);
++	u8 lan_mac[ETH_ALEN];
++	u8 wan_mac[ETH_ALEN];
++
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++		AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++		AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++		AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++		AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	gpio_request_one(DIR_505A1_GPIO_WAN_LED_ENABLE,
++		GPIOF_OUT_INIT_LOW, "WAN LED enable");
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_505_a1_leds_gpio),
++		dir_505_a1_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, DIR_505A1_KEYS_POLL_INTERVAL,
++		ARRAY_SIZE(dir_505_a1_gpio_keys),
++		dir_505_a1_gpio_keys);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_usb();
++
++	ath79_parse_ascii_mac(mac + DIR_505A1_LAN_MAC_OFFSET, lan_mac);
++	ath79_parse_ascii_mac(mac + DIR_505A1_WAN_MAC_OFFSET, wan_mac);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(art + DIR_505A1_CALDATA_OFFSET, lan_mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_DIR_505_A1, "DIR-505-A1",
++		"D-Link DIR-505 rev. A1", dir_505_a1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dir-600-a1.c linux-4.1.13/arch/mips/ath79/mach-dir-600-a1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dir-600-a1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dir-600-a1.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,159 @@
++/*
++ *  D-Link DIR-600 rev. A1 board support
++ *
++ *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define DIR_600_A1_GPIO_LED_WPS			0
++#define DIR_600_A1_GPIO_LED_POWER_AMBER		1
++#define DIR_600_A1_GPIO_LED_POWER_GREEN		6
++#define DIR_600_A1_GPIO_LED_LAN1		13
++#define DIR_600_A1_GPIO_LED_LAN2		14
++#define DIR_600_A1_GPIO_LED_LAN3		15
++#define DIR_600_A1_GPIO_LED_LAN4		16
++#define DIR_600_A1_GPIO_LED_WAN_AMBER		7
++#define DIR_600_A1_GPIO_LED_WAN_GREEN		17
++
++#define DIR_600_A1_GPIO_BTN_RESET		8
++#define DIR_600_A1_GPIO_BTN_WPS			12
++
++#define DIR_600_A1_KEYS_POLL_INTERVAL		20	/* msecs */
++#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL)
++
++#define DIR_600_A1_NVRAM_ADDR	0x1f030000
++#define DIR_600_A1_NVRAM_SIZE	0x10000
++
++static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
++	{
++		.name		= "d-link:green:power",
++		.gpio		= DIR_600_A1_GPIO_LED_POWER_GREEN,
++	}, {
++		.name		= "d-link:amber:power",
++		.gpio		= DIR_600_A1_GPIO_LED_POWER_AMBER,
++	}, {
++		.name		= "d-link:amber:wan",
++		.gpio		= DIR_600_A1_GPIO_LED_WAN_AMBER,
++	}, {
++		.name		= "d-link:green:wan",
++		.gpio		= DIR_600_A1_GPIO_LED_WAN_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:green:lan1",
++		.gpio		= DIR_600_A1_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:green:lan2",
++		.gpio		= DIR_600_A1_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:green:lan3",
++		.gpio		= DIR_600_A1_GPIO_LED_LAN3,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:green:lan4",
++		.gpio		= DIR_600_A1_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:blue:wps",
++		.gpio		= DIR_600_A1_GPIO_LED_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR_600_A1_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR_600_A1_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static void __init dir_600_a1_setup(void)
++{
++	const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 mac_buff[6];
++	u8 *mac = NULL;
++
++	if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
++				       "lan_mac=", mac_buff) == 0) {
++		ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
++		ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
++		mac = mac_buff;
++	}
++
++	ath79_register_m25p80(NULL);
++
++	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
++				 dir_600_a1_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dir_600_a1_gpio_keys),
++					dir_600_a1_gpio_keys);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++
++	/* WAN port */
++	ath79_register_eth(0);
++
++	ap91_pci_init(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
++	     dir_600_a1_setup);
++
++static void __init dir_615_e1_setup(void)
++{
++	dir_600_a1_setup();
++}
++
++MIPS_MACHINE(ATH79_MACH_DIR_615_E1, "DIR-615-E1", "D-Link DIR-615 rev. E1",
++	     dir_615_e1_setup);
++
++static void __init dir_615_e4_setup(void)
++{
++	dir_600_a1_setup();
++	ap9x_pci_setup_wmac_led_pin(0, 1);
++}
++
++MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
++	     dir_615_e4_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dir-615-c1.c linux-4.1.13/arch/mips/ath79/mach-dir-615-c1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dir-615-c1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dir-615-c1.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,135 @@
++/*
++ *  D-Link DIR-615 rev C1 board support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1	/* ORANGE:STATUS:TRICOLOR */
++#define DIR_615C1_GPIO_LED_BLUE_WPS	3	/* BLUE:WPS */
++#define DIR_615C1_GPIO_LED_GREEN_WAN	4       /* GREEN:WAN:TRICOLOR */
++#define DIR_615C1_GPIO_LED_GREEN_WANCPU	5       /* GREEN:WAN:CPU:TRICOLOR */
++#define DIR_615C1_GPIO_LED_GREEN_WLAN	6	/* GREEN:WLAN */
++#define DIR_615C1_GPIO_LED_GREEN_STATUS	14	/* GREEN:STATUS:TRICOLOR */
++#define DIR_615C1_GPIO_LED_ORANGE_WAN	15	/* ORANGE:WAN:TRICOLOR */
++
++/* buttons may need refinement */
++
++#define DIR_615C1_GPIO_BTN_WPS		12
++#define DIR_615C1_GPIO_BTN_RESET	21
++
++#define DIR_615C1_KEYS_POLL_INTERVAL	20	/* msecs */
++#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL)
++
++#define DIR_615C1_CONFIG_ADDR		0x1f020000
++#define DIR_615C1_CONFIG_SIZE		0x10000
++
++#define DIR_615C1_WLAN_MAC_ADDR		0x1f3fffb4
++
++static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
++	{
++		.name		= "d-link:orange:status",
++		.gpio		= DIR_615C1_GPIO_LED_ORANGE_STATUS,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:blue:wps",
++		.gpio		= DIR_615C1_GPIO_LED_BLUE_WPS,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:green:wan",
++		.gpio		= DIR_615C1_GPIO_LED_GREEN_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:green:wancpu",
++		.gpio		= DIR_615C1_GPIO_LED_GREEN_WANCPU,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:green:wlan",
++		.gpio		= DIR_615C1_GPIO_LED_GREEN_WLAN,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:green:status",
++		.gpio		= DIR_615C1_GPIO_LED_GREEN_STATUS,
++		.active_low     = 1,
++	}, {
++		.name		= "d-link:orange:wan",
++		.gpio		= DIR_615C1_GPIO_LED_ORANGE_WAN,
++		.active_low	= 1,
++	}
++
++};
++
++static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR_615C1_GPIO_BTN_RESET,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR_615C1_GPIO_BTN_WPS,
++	}
++};
++
++#define DIR_615C1_LAN_PHYMASK	BIT(0)
++#define DIR_615C1_WAN_PHYMASK	BIT(4)
++#define DIR_615C1_MDIO_MASK	(~(DIR_615C1_LAN_PHYMASK | \
++				   DIR_615C1_WAN_PHYMASK))
++
++static void __init dir_615c1_setup(void)
++{
++	const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 mac[ETH_ALEN], wlan_mac[ETH_ALEN];
++
++	if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
++				       "lan_mac=", mac) == 0) {
++		ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++		ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++	}
++
++	ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615C1_WLAN_MAC_ADDR), wlan_mac);
++
++	ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
++
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
++				 dir_615c1_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dir_615c1_gpio_keys),
++					dir_615c1_gpio_keys);
++
++	ath79_register_wmac(eeprom, wlan_mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",
++	     dir_615c1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dir-615-i1.c linux-4.1.13/arch/mips/ath79/mach-dir-615-i1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dir-615-i1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dir-615-i1.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,133 @@
++/*
++ *  D-Link DIR-615 rev. I1 board support
++ *  Copyright (C) 2013-2015 Jaehoon You <teslamint@gmail.com>
++ *
++ *  based on the DIR-600 rev. A1 board support code
++ *    Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
++ *    Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
++ *
++ *  based on the TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support code
++ *    Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DIR_615_I1_GPIO_LED_WPS				15
++#define DIR_615_I1_GPIO_LED_POWER_AMBER		14
++#define DIR_615_I1_GPIO_LED_POWER_GREEN		4
++#define DIR_615_I1_GPIO_LED_WAN_AMBER		22
++#define DIR_615_I1_GPIO_LED_WAN_GREEN		12
++#define DIR_615_I1_GPIO_LED_WLAN_GREEN		13
++
++#define DIR_615_I1_GPIO_BTN_WPS				16
++#define DIR_615_I1_GPIO_BTN_RESET			17
++
++#define DIR_615_I1_KEYS_POLL_INTERVAL		20 /* msecs */
++#define DIR_615_I1_KEYS_DEBOUNCE_INTERVAL	(3 * DIR_615_I1_KEYS_POLL_INTERVAL)
++
++#define DIR_615_I1_LAN_PHYMASK	BIT(0)
++#define DIR_615_I1_WAN_PHYMASK	BIT(4)
++#define DIR_615_I1_WLAN_MAC_ADDR	0x1fffffb4
++
++static struct gpio_led dir_615_i1_leds_gpio[] __initdata = {
++	{
++		.name		= "d-link:green:power",
++		.gpio		= DIR_615_I1_GPIO_LED_POWER_GREEN,
++	}, {
++		.name		= "d-link:amber:power",
++		.gpio		= DIR_615_I1_GPIO_LED_POWER_AMBER,
++	}, {
++		.name		= "d-link:amber:wan",
++		.gpio		= DIR_615_I1_GPIO_LED_WAN_AMBER,
++	}, {
++		.name		= "d-link:green:wan",
++		.gpio		= DIR_615_I1_GPIO_LED_WAN_GREEN,
++		.active_low = 1,
++	}, {
++		.name		= "d-link:green:wlan",
++		.gpio		= DIR_615_I1_GPIO_LED_WLAN_GREEN,
++		.active_low = 1,
++	}, {
++		.name		= "d-link:blue:wps",
++		.gpio		= DIR_615_I1_GPIO_LED_WPS,
++		.active_low = 1,
++	}
++};
++
++static struct gpio_keys_button dir_615_i1_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR_615_I1_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR_615_I1_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static void __init dir_615_i1_setup(void)
++{
++	u8 *eeprom  = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 mac[ETH_ALEN];
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_mdio(1, ~(DIR_615_I1_WAN_PHYMASK));
++
++	ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615_I1_WLAN_MAC_ADDR), mac);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++
++	/* GMAC0 is connected to the PHY0 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = DIR_615_I1_WAN_PHYMASK;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_mask = DIR_615_I1_LAN_PHYMASK;
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(NULL);
++
++	/* Disable JTAG, enabling GPIOs 0-3 */
++	/* Configure OBS4 line, for GPIO 4*/
++	ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
++				 AR934X_GPIO_FUNC_CLK_OBS4_EN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_i1_leds_gpio),
++					dir_615_i1_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, DIR_615_I1_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dir_615_i1_gpio_keys),
++					dir_615_i1_gpio_keys);
++
++	ath79_register_wmac(eeprom, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_DIR_615_I1, "DIR-615-I1", "D-Link DIR-615 rev. I1",
++		dir_615_i1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dir-825-b1.c linux-4.1.13/arch/mips/ath79/mach-dir-825-b1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dir-825-b1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dir-825-b1.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,191 @@
++/*
++ *  D-Link DIR-825 rev. B1 board support
++ *
++ *  Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
++ *
++ *  based on mach-wndr3700.c
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/rtl8366.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define DIR825B1_GPIO_LED_BLUE_USB		0
++#define DIR825B1_GPIO_LED_ORANGE_POWER		1
++#define DIR825B1_GPIO_LED_BLUE_POWER		2
++#define DIR825B1_GPIO_LED_BLUE_WPS		4
++#define DIR825B1_GPIO_LED_ORANGE_PLANET		6
++#define DIR825B1_GPIO_LED_BLUE_PLANET		11
++
++#define DIR825B1_GPIO_BTN_RESET			3
++#define DIR825B1_GPIO_BTN_WPS			8
++
++#define DIR825B1_GPIO_RTL8366_SDA		5
++#define DIR825B1_GPIO_RTL8366_SCK		7
++
++#define DIR825B1_KEYS_POLL_INTERVAL		20	/* msecs */
++#define DIR825B1_KEYS_DEBOUNCE_INTERVAL		(3 * DIR825B1_KEYS_POLL_INTERVAL)
++
++#define DIR825B1_CAL0_OFFSET			0x1000
++#define DIR825B1_CAL1_OFFSET			0x5000
++#define DIR825B1_MAC0_OFFSET			0xffa0
++#define DIR825B1_MAC1_OFFSET			0xffb4
++
++#define DIR825B1_CAL_LOCATION_0			0x1f660000
++#define DIR825B1_CAL_LOCATION_1			0x1f7f0000
++
++static struct gpio_led dir825b1_leds_gpio[] __initdata = {
++	{
++		.name		= "d-link:blue:usb",
++		.gpio		= DIR825B1_GPIO_LED_BLUE_USB,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:orange:power",
++		.gpio		= DIR825B1_GPIO_LED_ORANGE_POWER,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:blue:power",
++		.gpio		= DIR825B1_GPIO_LED_BLUE_POWER,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:blue:wps",
++		.gpio		= DIR825B1_GPIO_LED_BLUE_WPS,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:orange:planet",
++		.gpio		= DIR825B1_GPIO_LED_ORANGE_PLANET,
++		.active_low	= 1,
++	}, {
++		.name		= "d-link:blue:planet",
++		.gpio		= DIR825B1_GPIO_LED_BLUE_PLANET,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR825B1_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR825B1_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
++	{ .reg = 0x06, .val = 0x0108 },
++};
++
++static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
++	.gpio_sda	= DIR825B1_GPIO_RTL8366_SDA,
++	.gpio_sck	= DIR825B1_GPIO_RTL8366_SCK,
++	.num_initvals	= ARRAY_SIZE(dir825b1_rtl8366s_initvals),
++	.initvals	= dir825b1_rtl8366s_initvals,
++};
++
++static struct platform_device dir825b1_rtl8366s_device = {
++	.name		= RTL8366S_DRIVER_NAME,
++	.id		= -1,
++	.dev = {
++		.platform_data	= &dir825b1_rtl8366s_data,
++	}
++};
++
++static bool __init dir825b1_is_caldata_valid(u8 *p)
++{
++	u16 *magic0, *magic1;
++
++	magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET);
++	magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET);
++
++	return (*magic0 == 0xa55a && *magic1 == 0xa55a);
++}
++
++static void __init dir825b1_wlan_init(void)
++{
++	u8 *caldata;
++	u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
++	u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
++
++	caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0);
++	if (!dir825b1_is_caldata_valid(caldata)) {
++		caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1);
++		if (!dir825b1_is_caldata_valid(caldata)) {
++			pr_err("no calibration data found\n");
++			return;
++		}
++	}
++
++	ath79_parse_ascii_mac(caldata + DIR825B1_MAC0_OFFSET, mac0);
++	ath79_parse_ascii_mac(caldata + DIR825B1_MAC1_OFFSET, mac1);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 0);
++	ath79_init_mac(wmac0, mac0, 0);
++	ath79_init_mac(wmac1, mac1, 1);
++
++	ap9x_pci_setup_wmac_led_pin(0, 5);
++	ap9x_pci_setup_wmac_led_pin(1, 5);
++
++	ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, wmac0,
++		      caldata + DIR825B1_CAL1_OFFSET, wmac1);
++}
++
++static void __init dir825b1_setup(void)
++{
++	dir825b1_wlan_init();
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_pll_data.pll_1000 = 0x11110000;
++
++	ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = 0x10;
++	ath79_eth1_pll_data.pll_1000 = 0x11110000;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
++				 dir825b1_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dir825b1_gpio_keys),
++					dir825b1_gpio_keys);
++
++	ath79_register_usb();
++
++	platform_device_register(&dir825b1_rtl8366s_device);
++}
++
++MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
++	     dir825b1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dir-825-c1.c linux-4.1.13/arch/mips/ath79/mach-dir-825-c1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dir-825-c1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dir-825-c1.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,241 @@
++/*
++ *  D-Link DIR-825 rev. C1 board support
++ *
++ *  Copyright (C) 2013 Alexander Stadler
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DIR825C1_GPIO_LED_BLUE_USB		11
++#define DIR825C1_GPIO_LED_AMBER_POWER		14
++#define DIR825C1_GPIO_LED_BLUE_POWER		22
++#define DIR825C1_GPIO_LED_BLUE_WPS		15
++#define DIR825C1_GPIO_LED_AMBER_PLANET		19
++#define DIR825C1_GPIO_LED_BLUE_PLANET		18
++#define DIR825C1_GPIO_LED_WLAN_2G		13
++
++#define DIR825C1_GPIO_WAN_LED_ENABLE		20
++
++#define DIR825C1_GPIO_BTN_RESET			17
++#define DIR825C1_GPIO_BTN_WPS			16
++
++#define DIR825C1_KEYS_POLL_INTERVAL		20	/* msecs */
++#define DIR825C1_KEYS_DEBOUNCE_INTERVAL		(3 * DIR825C1_KEYS_POLL_INTERVAL)
++
++#define DIR825C1_MAC0_OFFSET			0x4
++#define DIR825C1_MAC1_OFFSET			0x18
++#define DIR825C1_WMAC_CALDATA_OFFSET		0x1000
++#define DIR825C1_PCIE_CALDATA_OFFSET		0x5000
++
++static struct gpio_led dir825c1_leds_gpio[] __initdata = {
++	{
++		.name		= "d-link:blue:usb",
++		.gpio		= DIR825C1_GPIO_LED_BLUE_USB,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:amber:power",
++		.gpio		= DIR825C1_GPIO_LED_AMBER_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:blue:power",
++		.gpio		= DIR825C1_GPIO_LED_BLUE_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:blue:wps",
++		.gpio		= DIR825C1_GPIO_LED_BLUE_WPS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:amber:planet",
++		.gpio		= DIR825C1_GPIO_LED_AMBER_PLANET,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:blue:wlan2g",
++		.gpio		= DIR825C1_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_led dir835a1_leds_gpio[] __initdata = {
++	{
++		.name		= "d-link:amber:power",
++		.gpio		= DIR825C1_GPIO_LED_AMBER_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:green:power",
++		.gpio		= DIR825C1_GPIO_LED_BLUE_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:blue:wps",
++		.gpio		= DIR825C1_GPIO_LED_BLUE_WPS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:amber:planet",
++		.gpio		= DIR825C1_GPIO_LED_AMBER_PLANET,
++		.active_low	= 1,
++	},
++	{
++		.name		= "d-link:green:planet",
++		.gpio		= DIR825C1_GPIO_LED_BLUE_PLANET,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = {
++	{
++		.desc		= "Soft reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR825C1_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DIR825C1_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = {
++	.led_ctrl0 = 0x00000000,
++	.led_ctrl1 = 0xc737c737,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x00c30c00,
++	.open_drain = true,
++};
++
++static struct ar8327_platform_data dir825c1_ar8327_data = {
++	.pad0_cfg = &dir825c1_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &dir825c1_ar8327_led_cfg,
++};
++
++static struct mdio_board_info dir825c1_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &dir825c1_ar8327_data,
++	},
++};
++
++static void __init dir825c1_generic_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
++	u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
++
++	ath79_parse_ascii_mac(mac + DIR825C1_MAC0_OFFSET, mac0);
++	ath79_parse_ascii_mac(mac + DIR825C1_MAC1_OFFSET, mac1);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dir825c1_gpio_keys),
++					dir825c1_gpio_keys);
++
++	ath79_init_mac(wmac0, mac0, 0);
++	ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, wmac0);
++
++	ath79_init_mac(wmac1, mac1, 1);
++	ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, wmac1);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++
++	mdiobus_register_board_info(dir825c1_mdio0_info,
++				    ARRAY_SIZE(dir825c1_mdio0_info));
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
++
++	/* GMAC0 is connected to an AR8327N switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++
++	ath79_register_usb();
++}
++
++static void __init dir825c1_setup(void)
++{
++	ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB,
++				 AR934X_GPIO_OUT_GPIO);
++
++	gpio_request_one(DIR825C1_GPIO_WAN_LED_ENABLE,
++			 GPIOF_OUT_INIT_LOW, "WAN LED enable");
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
++				 dir825c1_leds_gpio);
++
++	ap9x_pci_setup_wmac_led_pin(0, 0);
++
++	dir825c1_generic_setup();
++}
++
++static void __init dir835a1_setup(void)
++{
++	dir825c1_ar8327_data.led_cfg = NULL;
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dir835a1_leds_gpio),
++				 dir835a1_leds_gpio);
++
++	dir825c1_generic_setup();
++}
++
++MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1",
++	     "D-Link DIR-825 rev. C1",
++	     dir825c1_setup);
++
++MIPS_MACHINE(ATH79_MACH_DIR_835_A1, "DIR-835-A1",
++	     "D-Link DIR-835 rev. A1",
++	     dir835a1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dlan-hotspot.c linux-4.1.13/arch/mips/ath79/mach-dlan-hotspot.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dlan-hotspot.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dlan-hotspot.c	2015-12-04 18:27:35.457807850 +0100
+@@ -0,0 +1,117 @@
++/*
++ *  devolo dLAN Hotspot board support
++ *
++ *  Copyright (C) 2015 Torsten Schnuis <torsten.schnuis@gik.de>
++ *  Copyright (C) 2015 devolo AG
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DLAN_HOTSPOT_GPIO_LED_WIFI                0
++
++#define DLAN_HOTSPOT_GPIO_BTN_RESET              11
++#define DLAN_HOTSPOT_GPIO_BTN_PLC_PAIRING        12
++#define DLAN_HOTSPOT_GPIO_BTN_WIFI               21
++
++#define DLAN_HOTSPOT_GPIO_PLC_POWER              22
++#define DLAN_HOTSPOT_GPIO_PLC_RESET              20
++#define DLAN_HOTSPOT_GPIO_PLC_DISABLE_LEDS       18
++
++#define DLAN_HOTSPOT_KEYS_POLL_INTERVAL          20    /* msecs */
++#define DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL      (3 * DLAN_HOTSPOT_KEYS_POLL_INTERVAL)
++
++#define DLAN_HOTSPOT_ART_ADDRESS                 0x1fff0000
++#define DLAN_HOTSPOT_CALDATA_OFFSET              0x00001000
++#define DLAN_HOTSPOT_MAC_ADDRESS_OFFSET          0x00001002
++
++static struct gpio_led dlan_hotspot_leds_gpio[] __initdata = {
++	{
++		.name		= "devolo:green:wifi",
++		.gpio		= DLAN_HOTSPOT_GPIO_LED_WIFI,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button dlan_hotspot_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_HOTSPOT_GPIO_BTN_RESET,
++		.active_low     = 0,
++	},
++	{
++		.desc		= "Pairing button",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_HOTSPOT_GPIO_BTN_PLC_PAIRING,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "WLAN button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_HOTSPOT_GPIO_BTN_WIFI,
++		.active_low	= 0,
++	}
++};
++
++static void __init dlan_hotspot_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(DLAN_HOTSPOT_ART_ADDRESS);
++	u8 *cal = art + DLAN_HOTSPOT_CALDATA_OFFSET;
++	u8 *wifi_mac = art + DLAN_HOTSPOT_MAC_ADDRESS_OFFSET;
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_hotspot_leds_gpio),
++				 dlan_hotspot_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, DLAN_HOTSPOT_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dlan_hotspot_gpio_keys),
++					dlan_hotspot_gpio_keys);
++
++	gpio_request_one(DLAN_HOTSPOT_GPIO_PLC_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "PLC power");
++	gpio_request_one(DLAN_HOTSPOT_GPIO_PLC_RESET,
++			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
++			 "PLC reset");
++	gpio_request_one(DLAN_HOTSPOT_GPIO_PLC_DISABLE_LEDS,
++			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
++			 "PLC LEDs");
++
++	ath79_register_usb();
++
++	ath79_register_m25p80(NULL);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, 2);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(cal, wifi_mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_DLAN_HOTSPOT, "dLAN-Hotspot",
++	     "dLAN Hotspot", dlan_hotspot_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dlan-pro-1200-ac.c linux-4.1.13/arch/mips/ath79/mach-dlan-pro-1200-ac.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dlan-pro-1200-ac.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dlan-pro-1200-ac.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,189 @@
++/*
++ * devolo dLAN pro 500 Wireless+ support
++ *
++ * Copyright (c) 2013-2015 devolo AG
++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
++#include "dev-spi.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE		13
++#define DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE		21
++#define DLAN_PRO_1200_AC_GPIO_LED_WLAN		12
++#define DLAN_PRO_1200_AC_GPIO_LED_DLAN			14
++#define DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR			15
++
++#define DLAN_PRO_1200_AC_GPIO_BTN_WLAN			20
++#define DLAN_PRO_1200_AC_GPIO_BTN_DLAN			22
++#define DLAN_PRO_1200_AC_GPIO_BTN_RESET			4
++#define DLAN_PRO_1200_AC_GPIO_DLAN_IND          17
++#define DLAN_PRO_1200_AC_GPIO_DLAN_ERR_IND      16
++
++#define DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL		20	/* msecs */
++#define DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL		(3 * DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL)
++
++#define DLAN_PRO_1200_AC_ART_ADDRESS			0x1fff0000
++#define DLAN_PRO_1200_AC_CALDATA_OFFSET			0x1000
++#define DLAN_PRO_1200_AC_WIFIMAC_OFFSET			0x1002
++#define DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET	0x5000
++
++static struct gpio_led dlan_pro_1200_ac_leds_gpio[] __initdata = {
++	{
++		.name		        = "devolo:status:wlan",
++		.gpio		        = DLAN_PRO_1200_AC_GPIO_LED_WLAN,
++		.active_low	        = 1,
++	},
++	{
++		.name		        = "devolo:status:dlan",
++		.gpio		        = DLAN_PRO_1200_AC_GPIO_LED_DLAN,
++		.active_low	        = 1,
++	},
++	{
++		.name		        = "devolo:error:dlan",
++		.gpio		        = DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR,
++		.active_low	        = 0,
++	}
++};
++
++static struct gpio_keys_button dlan_pro_1200_ac_gpio_keys[] __initdata = {
++	{
++		.desc		= "dLAN button",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_PRO_1200_AC_GPIO_BTN_DLAN,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WLAN button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_PRO_1200_AC_GPIO_BTN_WLAN,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_PRO_1200_AC_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = false,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
++};
++
++static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad5_cfg = {
++	.mode = 0,
++	.txclk_delay_en = 0,
++	.rxclk_delay_en = 0,
++	.txclk_delay_sel = 0,
++	.rxclk_delay_sel = 0,
++};
++
++static struct ar8327_platform_data dlan_pro_1200_ac_ar8327_data = {
++	.pad0_cfg = &dlan_pro_1200_ac_ar8327_pad0_cfg,
++	.pad5_cfg = &dlan_pro_1200_ac_ar8327_pad5_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info dlan_pro_1200_ac_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &dlan_pro_1200_ac_ar8327_data,
++	},
++};
++
++static void __init dlan_pro_1200_ac_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_1200_AC_ART_ADDRESS);
++	u8 *cal = art + DLAN_PRO_1200_AC_CALDATA_OFFSET;
++	u8 *wifi_mac = art + DLAN_PRO_1200_AC_WIFIMAC_OFFSET;
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_1200_ac_leds_gpio),
++				 dlan_pro_1200_ac_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dlan_pro_1200_ac_gpio_keys),
++					dlan_pro_1200_ac_gpio_keys);
++
++	/* dLAN power must be enabled from user-space as soon as the boot-from-host daemon is running */
++	gpio_request_one(DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE,
++			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
++			 "dLAN power");
++
++	/* WLAN power is turned on initially to allow the PCI bus scan to succeed */
++	gpio_request_one(DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "WLAN power");
++
++	ath79_register_wmac(cal, wifi_mac);
++	ap91_pci_init(art + DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET, NULL);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2);
++
++	mdiobus_register_board_info(dlan_pro_1200_ac_mdio0_info,
++				    ARRAY_SIZE(dlan_pro_1200_ac_mdio0_info));
++
++	/* GMAC0 is connected to an AR8337 */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x02000000;
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_DLAN_PRO_1200_AC, "dLAN-pro-1200-ac", "devolo dLAN pro 1200+ WiFi ac",
++	     dlan_pro_1200_ac_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dlan-pro-500-wp.c linux-4.1.13/arch/mips/ath79/mach-dlan-pro-500-wp.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dlan-pro-500-wp.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dlan-pro-500-wp.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,203 @@
++/*
++ * devolo dLAN pro 500 Wireless+ support
++ *
++ * Copyright (c) 2013-2015 devolo AG
++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE		13
++#define DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE		17
++#define DLAN_PRO_500_WP_GPIO_LED_WLAN_5G		11
++#define DLAN_PRO_500_WP_GPIO_LED_WLAN_2G		12
++#define DLAN_PRO_500_WP_GPIO_LED_STATUS			16
++#define DLAN_PRO_500_WP_GPIO_LED_ETH			14
++
++#define DLAN_PRO_500_WP_GPIO_BTN_WPS			20
++#define DLAN_PRO_500_WP_GPIO_BTN_WLAN			22
++#define DLAN_PRO_500_WP_GPIO_BTN_DLAN			21
++#define DLAN_PRO_500_WP_GPIO_BTN_RESET			4
++
++#define DLAN_PRO_500_WP_KEYS_POLL_INTERVAL		20	/* msecs */
++#define DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL		(3 * DLAN_PRO_500_WP_KEYS_POLL_INTERVAL)
++
++#define DLAN_PRO_500_WP_ART_ADDRESS			0x1fff0000
++#define DLAN_PRO_500_WP_CALDATA_OFFSET			0x1000
++#define DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET		0x1002
++#define DLAN_PRO_500_WP_PCIE_CALDATA_OFFSET		0x5000
++
++static struct gpio_led dlan_pro_500_wp_leds_gpio[] __initdata = {
++	{
++		.name		= "devolo:green:status",
++		.gpio		= DLAN_PRO_500_WP_GPIO_LED_STATUS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "devolo:green:eth",
++		.gpio		= DLAN_PRO_500_WP_GPIO_LED_ETH,
++		.active_low	= 1,
++	},
++	{
++		.name		= "devolo:blue:wlan-5g",
++		.gpio		= DLAN_PRO_500_WP_GPIO_LED_WLAN_5G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "devolo:green:wlan-2g",
++		.gpio		= DLAN_PRO_500_WP_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button dlan_pro_500_wp_gpio_keys[] __initdata = {
++	{
++		.desc		= "dLAN button",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_PRO_500_WP_GPIO_BTN_DLAN,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_PRO_500_WP_GPIO_BTN_WPS,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "WLAN button",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_PRO_500_WP_GPIO_BTN_WLAN,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code           = KEY_RESTART,
++		.debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DLAN_PRO_500_WP_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static struct ar8327_pad_cfg dlan_pro_500_wp_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_PHY_RGMII,
++	.txclk_delay_en = false,
++	.rxclk_delay_en = false,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL0,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
++};
++
++static struct ar8327_led_cfg dlan_pro_500_wp_ar8327_led_cfg = {
++	.led_ctrl0 = 0x00000000,
++	.led_ctrl1 = 0xc737c737,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x00c30c00,
++	.open_drain = true,
++};
++
++static struct ar8327_platform_data dlan_pro_500_wp_ar8327_data = {
++	.pad0_cfg = &dlan_pro_500_wp_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 0,
++		.rxpause = 0,
++	},
++	.led_cfg = &dlan_pro_500_wp_ar8327_led_cfg,
++};
++
++static struct mdio_board_info dlan_pro_500_wp_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &dlan_pro_500_wp_ar8327_data,
++	},
++};
++
++static void __init dlan_pro_500_wp_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_500_WP_ART_ADDRESS);
++	u8 *cal = art + DLAN_PRO_500_WP_CALDATA_OFFSET;
++	u8 *wifi_mac = art + DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET;
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_500_wp_leds_gpio),
++				 dlan_pro_500_wp_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, DLAN_PRO_500_WP_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dlan_pro_500_wp_gpio_keys),
++					dlan_pro_500_wp_gpio_keys);
++
++	gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE,
++			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
++			 "PLC power");
++	gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE,
++			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
++			 "PLC LEDs");
++
++	ath79_register_wmac(cal, wifi_mac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++
++	ath79_register_mdio(1, 0x0);
++	ath79_register_mdio(0, 0x0);
++
++	mdiobus_register_board_info(dlan_pro_500_wp_mdio0_info,
++				    ARRAY_SIZE(dlan_pro_500_wp_mdio0_info));
++
++	/* GMAC0 is connected to a AR7400 PLC in PHY mode */
++	ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_pll_data.pll_1000 = 0x0e000000;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_DLAN_PRO_500_WP, "dLAN-pro-500-wp", "devolo dLAN pro 500 Wireless+",
++	     dlan_pro_500_wp_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-dragino2.c linux-4.1.13/arch/mips/ath79/mach-dragino2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-dragino2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-dragino2.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,136 @@
++/*
++ *  DRAGINO V2 board support, based on Atheros AP121 board support
++ *
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2012 Elektra Wagenrad <elektra@villagetelco.org>
++ *  Copyright (C) 2014 Vittorio Gambaletta <openwrt@vittgam.net>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DRAGINO2_GPIO_LED_WLAN		0
++#define DRAGINO2_GPIO_LED_LAN		13
++#define DRAGINO2_GPIO_LED_WAN		17
++
++/*
++ * The following GPIO is named "SYS" on newer revisions of the the board.
++ * It was previously used to indicate USB activity, even though it was
++ * named "Router".
++ */
++
++#define DRAGINO2_GPIO_LED_SYS		28
++#define DRAGINO2_GPIO_BTN_JUMPSTART	11
++#define DRAGINO2_GPIO_BTN_RESET		12
++
++#define DRAGINO2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define DRAGINO2_KEYS_DEBOUNCE_INTERVAL	(3 * DRAGINO2_KEYS_POLL_INTERVAL)
++
++#define DRAGINO2_MAC0_OFFSET		0x0000
++#define DRAGINO2_MAC1_OFFSET		0x0006
++#define DRAGINO2_CALDATA_OFFSET		0x1000
++#define DRAGINO2_WMAC_MAC_OFFSET	0x1002
++
++static struct gpio_led dragino2_leds_gpio[] __initdata = {
++	{
++		.name		= "dragino2:red:wlan",
++		.gpio		= DRAGINO2_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},
++	{
++		.name		= "dragino2:red:wan",
++		.gpio		= DRAGINO2_GPIO_LED_WAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "dragino2:red:lan",
++		.gpio		= DRAGINO2_GPIO_LED_LAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "dragino2:red:system",
++		.gpio		= DRAGINO2_GPIO_LED_SYS,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button dragino2_gpio_keys[] __initdata = {
++	{
++		.desc		= "jumpstart button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DRAGINO2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DRAGINO2_GPIO_BTN_JUMPSTART,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DRAGINO2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DRAGINO2_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static void __init dragino2_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_wmac(art + DRAGINO2_CALDATA_OFFSET,
++			    art + DRAGINO2_WMAC_MAC_OFFSET);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + DRAGINO2_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + DRAGINO2_MAC1_OFFSET, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* Enable GPIO13, GPIO14, GPIO15, GPIO16 and GPIO17 */
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	/* LAN port */
++	ath79_register_eth(1);
++
++	/* WAN port */
++	ath79_register_eth(0);
++
++	/* Enable GPIO26 and GPIO27 */
++	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP,
++		       ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP) |
++		       AR933X_BOOTSTRAP_MDIO_GPIO_EN);
++}
++
++static void __init dragino2_setup(void)
++{
++	dragino2_common_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dragino2_leds_gpio),
++				 dragino2_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, DRAGINO2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dragino2_gpio_keys),
++					dragino2_gpio_keys);
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_DRAGINO2, "DRAGINO2", "Dragino Dragino v2",
++	     dragino2_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-eap300v2.c linux-4.1.13/arch/mips/ath79/mach-eap300v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-eap300v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-eap300v2.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,101 @@
++/*
++ * EnGenius EAP300 v2 board support
++ *
++ * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define EAP300V2_GPIO_LED_POWER		0
++#define EAP300V2_GPIO_LED_LAN		16
++#define EAP300V2_GPIO_LED_WLAN		17
++
++#define EAP300V2_GPIO_BTN_RESET		1
++
++#define EAP300V2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define EAP300V2_KEYS_DEBOUNCE_INTERVAL	(3 * EAP300V2_KEYS_POLL_INTERVAL)
++
++static struct gpio_led eap300v2_leds_gpio[] __initdata = {
++	{
++		.name		= "engenius:blue:power",
++		.gpio		= EAP300V2_GPIO_LED_POWER,
++		.active_low	= 1,
++	}, {
++		.name		= "engenius:blue:lan",
++		.gpio		= EAP300V2_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "engenius:blue:wlan",
++		.gpio		= EAP300V2_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button eap300v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = EAP300V2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= EAP300V2_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++#define EAP300V2_ART_MAC_OFFSET		2
++
++#define EAP300V2_LAN_PHYMASK		BIT(0)
++
++static void __init eap300v2_setup(void)
++{
++	u8 *art = (u8 *)KSEG1ADDR(0x1fff1000);
++
++	ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
++
++	ath79_gpio_output_select(EAP300V2_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(EAP300V2_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(EAP300V2_GPIO_LED_WLAN, AR934X_GPIO_OUT_GPIO);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(eap300v2_leds_gpio),
++				 eap300v2_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, EAP300V2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(eap300v2_gpio_keys),
++					eap300v2_gpio_keys);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_wmac(art, NULL);
++	ath79_register_mdio(1, 0x0);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       art + EAP300V2_ART_MAC_OFFSET, 0);
++
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = EAP300V2_LAN_PHYMASK;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = EAP300V2_LAN_PHYMASK;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_EAP300V2, "EAP300V2", "EnGenius EAP300 v2",
++	     eap300v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-eap7660d.c linux-4.1.13/arch/mips/ath79/mach-eap7660d.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-eap7660d.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-eap7660d.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,181 @@
++/*
++ *  Senao EAP7660D board support
++ *
++ *  Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com>
++ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/ath5k_platform.h>
++#include <linux/delay.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define EAP7660D_KEYS_POLL_INTERVAL	20	/* msecs */
++#define EAP7660D_KEYS_DEBOUNCE_INTERVAL	(3 * EAP7660D_KEYS_POLL_INTERVAL)
++
++#define EAP7660D_GPIO_DS4		7
++#define EAP7660D_GPIO_DS5		2
++#define EAP7660D_GPIO_DS7		0
++#define EAP7660D_GPIO_DS8		4
++#define EAP7660D_GPIO_SW1		3
++#define EAP7660D_GPIO_SW3		8
++#define EAP7660D_PHYMASK		BIT(20)
++#define EAP7660D_BOARDCONFIG		0x1F7F0000
++#define EAP7660D_GBIC_MAC_OFFSET	0x1000
++#define EAP7660D_WMAC0_MAC_OFFSET	0x1010
++#define EAP7660D_WMAC1_MAC_OFFSET	0x1016
++#define EAP7660D_WMAC0_CALDATA_OFFSET	0x2000
++#define EAP7660D_WMAC1_CALDATA_OFFSET	0x3000
++
++#ifdef CONFIG_PCI
++static struct ath5k_platform_data eap7660d_wmac0_data;
++static struct ath5k_platform_data eap7660d_wmac1_data;
++static char eap7660d_wmac0_mac[6];
++static char eap7660d_wmac1_mac[6];
++static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
++static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
++
++static int eap7660d_pci_plat_dev_init(struct pci_dev *dev)
++{
++	switch (PCI_SLOT(dev->devfn)) {
++	case 17:
++		dev->dev.platform_data = &eap7660d_wmac0_data;
++		break;
++
++	case 18:
++		dev->dev.platform_data = &eap7660d_wmac1_data;
++		break;
++	}
++
++	return 0;
++}
++
++void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
++			      u8 *cal_data1, u8 *mac_addr1)
++{
++	if (cal_data0 && *cal_data0 == 0xa55a) {
++		memcpy(eap7660d_wmac0_eeprom, cal_data0,
++			ATH5K_PLAT_EEP_MAX_WORDS);
++		eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom;
++	}
++
++	if (cal_data1 && *cal_data1 == 0xa55a) {
++		memcpy(eap7660d_wmac1_eeprom, cal_data1,
++			ATH5K_PLAT_EEP_MAX_WORDS);
++		eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom;
++	}
++
++	if (mac_addr0) {
++		memcpy(eap7660d_wmac0_mac, mac_addr0,
++			sizeof(eap7660d_wmac0_mac));
++		eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac;
++	}
++
++	if (mac_addr1) {
++		memcpy(eap7660d_wmac1_mac, mac_addr1,
++			sizeof(eap7660d_wmac1_mac));
++		eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac;
++	}
++
++	ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init);
++	ath79_register_pci();
++}
++#else
++static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
++				     u8 *cal_data1, u8 *mac_addr1)
++{
++}
++#endif /* CONFIG_PCI */
++
++static struct gpio_led eap7660d_leds_gpio[] __initdata = {
++	{
++		.name		= "eap7660d:green:ds8",
++		.gpio		= EAP7660D_GPIO_DS8,
++		.active_low	= 0,
++	},
++	{
++		.name		= "eap7660d:green:ds5",
++		.gpio		= EAP7660D_GPIO_DS5,
++		.active_low	= 0,
++	},
++	{
++		.name		= "eap7660d:green:ds7",
++		.gpio		= EAP7660D_GPIO_DS7,
++		.active_low	= 0,
++	},
++	{
++		.name		= "eap7660d:green:ds4",
++		.gpio		= EAP7660D_GPIO_DS4,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= EAP7660D_GPIO_SW1,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= EAP7660D_GPIO_SW3,
++		.active_low	= 1,
++	}
++};
++
++static const char *eap7660d_part_probes[] = {
++	"RedBoot",
++	NULL,
++};
++
++static struct flash_platform_data eap7660d_flash_data = {
++	.part_probes	= eap7660d_part_probes,
++};
++
++static void __init eap7660d_setup(void)
++{
++	u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG);
++
++	ath79_register_mdio(0, ~EAP7660D_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++			boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = EAP7660D_PHYMASK;
++	ath79_register_eth(0);
++	ath79_register_m25p80(&eap7660d_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
++					eap7660d_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(eap7660d_gpio_keys),
++					 eap7660d_gpio_keys);
++	eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET,
++			  boardconfig + EAP7660D_WMAC0_MAC_OFFSET,
++			  boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET,
++			  boardconfig + EAP7660D_WMAC1_MAC_OFFSET);
++};
++
++MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
++	     eap7660d_setup);
++
++MIPS_MACHINE(ATH79_MACH_ALL0305, "ALL0305", "Allnet ALL0305",
++	     eap7660d_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-el-m150.c linux-4.1.13/arch/mips/ath79/mach-el-m150.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-el-m150.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-el-m150.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,112 @@
++/*
++ *  Easy-Link EL-M150 board support
++ *
++ *  Copyright (C) 2012 huangfc <huangfangcheng@163.com>
++ *  Copyright (C) 2012 HYS <550663898@qq.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "dev-usb.h"
++
++#define EL_M150_GPIO_BTN6		6
++#define EL_M150_GPIO_BTN7		7
++#define EL_M150_GPIO_BTN_RESET		11
++
++#define EL_M150_GPIO_LED_SYSTEM		27
++#define EL_M150_GPIO_USB_POWER		8
++
++#define EL_M150_KEYS_POLL_INTERVAL	20	/* msecs */
++#define EL_M150_KEYS_DEBOUNCE_INTERVAL (3 * EL_M150_KEYS_POLL_INTERVAL)
++
++static const char *EL_M150_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data EL_M150_flash_data = {
++	.part_probes	= EL_M150_part_probes,
++};
++
++static struct gpio_led EL_M150_leds_gpio[] __initdata = {
++	{
++		.name		= "easylink:green:system",
++		.gpio		= EL_M150_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button EL_M150_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= EL_M150_GPIO_BTN_RESET,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "BTN_6",
++		.type		= EV_KEY,
++		.code		= BTN_6,
++		.debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= EL_M150_GPIO_BTN6,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "BTN_7",
++		.type		= EV_KEY,
++		.code		= BTN_7,
++		.debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= EL_M150_GPIO_BTN7,
++		.active_low	= 1,
++	},
++};
++
++static void __init el_m150_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(EL_M150_leds_gpio),
++				 EL_M150_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, EL_M150_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(EL_M150_gpio_keys),
++					EL_M150_gpio_keys);
++
++	gpio_request_one(EL_M150_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_register_m25p80(&EL_M150_flash_data);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_EL_M150, "EL-M150",
++	     "EasyLink EL-M150", el_m150_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-el-mini.c linux-4.1.13/arch/mips/ath79/mach-el-mini.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-el-mini.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-el-mini.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,86 @@
++/*
++ *  Easy-Link EL-MINI board support
++ *
++ *  Copyright (C) 2012 huangfc <huangfangcheng@163.com>
++ *  Copyright (C) 2011 hys <550663898@qq.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define MINI_GPIO_LED_SYSTEM	27
++#define MINI_GPIO_BTN_RESET	11
++
++#define MINI_GPIO_USB_POWER	8
++
++#define MINI_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MINI_KEYS_DEBOUNCE_INTERVAL	(3 * MINI_KEYS_POLL_INTERVAL)
++
++static const char *mini_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data mini_flash_data = {
++	.part_probes	= mini_part_probes,
++};
++
++static struct gpio_led mini_leds_gpio[] __initdata = {
++	{
++		.name		= "easylink:green:system",
++		.gpio		= MINI_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button mini_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MINI_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MINI_GPIO_BTN_RESET,
++		.active_low	= 0,
++	}
++};
++
++static void __init el_mini_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(&mini_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(mini_leds_gpio),
++				 mini_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, MINI_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mini_gpio_keys),
++					mini_gpio_keys);
++
++	gpio_request_one(MINI_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_EL_MINI, "EL-MINI", "EasyLink EL-MINI",
++	     el_mini_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-epg5000.c linux-4.1.13/arch/mips/ath79/mach-epg5000.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-epg5000.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-epg5000.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,178 @@
++/*
++ *  EnGenius EPG5000 board support
++ *
++ *  Copyright (c) 2014 Jon Suphammer <jon@suphammer.net>
++ *  Copyright (c) 2015 Christian Beier <cb@shoutrlabs.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define EPG5000_GPIO_LED_WLAN_5G	23
++#define EPG5000_GPIO_LED_WLAN_2G	13
++#define EPG5000_GPIO_LED_POWER_AMBER	2
++#define EPG5000_GPIO_LED_WPS_AMBER	22
++#define EPG5000_GPIO_LED_WPS_BLUE	19
++
++#define EPG5000_GPIO_BTN_WPS		16
++#define EPG5000_GPIO_BTN_RESET		17
++
++#define EPG5000_KEYS_POLL_INTERVAL	20	/* msecs */
++#define EPG5000_KEYS_DEBOUNCE_INTERVAL	(3 * EPG5000_KEYS_POLL_INTERVAL)
++
++#define EPG5000_CALDATA_ADDR 0x1fff0000
++#define EPG5000_WMAC_CALDATA_OFFSET	0x1000
++#define EPG5000_PCIE_CALDATA_OFFSET	0x5000
++
++#define EPG5000_NVRAM_ADDR	0x1f030000
++#define EPG5000_NVRAM_SIZE	0x10000
++
++static struct gpio_led epg5000_leds_gpio[] __initdata = {
++	{
++		.name		= "epg5000:amber:power",
++		.gpio		= EPG5000_GPIO_LED_POWER_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "epg5000:blue:wps",
++		.gpio		= EPG5000_GPIO_LED_WPS_BLUE,
++		.active_low	= 1,
++	},
++	{
++		.name		= "epg5000:amber:wps",
++		.gpio		= EPG5000_GPIO_LED_WPS_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "epg5000:blue:wlan-2g",
++		.gpio		= EPG5000_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "epg5000:blue:wlan-5g",
++		.gpio		= EPG5000_GPIO_LED_WLAN_5G,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button epg5000_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= EPG5000_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= EPG5000_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg epg5000_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++	.mac06_exchange_en = true,
++};
++
++static struct ar8327_platform_data epg5000_ar8327_data = {
++	.pad0_cfg = &epg5000_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info epg5000_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &epg5000_ar8327_data,
++	},
++};
++
++static int epg5000_get_mac(const char *name, char *mac)
++{
++	u8 *nvram = (u8 *) KSEG1ADDR(EPG5000_NVRAM_ADDR);
++	int err;
++
++	err = ath79_nvram_parse_mac_addr(nvram, EPG5000_NVRAM_SIZE,
++					 name, mac);
++	if (err) {
++		pr_err("no MAC address found for %s\n", name);
++		return false;
++	}
++
++	return true;
++}
++
++static void __init epg5000_setup(void)
++{
++	u8 *caldata = (u8 *) KSEG1ADDR(EPG5000_CALDATA_ADDR);
++	u8 mac1[ETH_ALEN];
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(epg5000_leds_gpio),
++					epg5000_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, EPG5000_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(epg5000_gpio_keys),
++					epg5000_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	ath79_register_mdio(0, 0x0);
++
++	mdiobus_register_board_info(epg5000_mdio0_info,
++					ARRAY_SIZE(epg5000_mdio0_info));
++
++	/* GMAC0 is connected to an QCA8327N switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	if (epg5000_get_mac("ethaddr=", mac1))
++		ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++
++	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++	ath79_register_eth(0);
++
++	ath79_register_wmac(caldata + EPG5000_WMAC_CALDATA_OFFSET, mac1);
++
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_EPG5000, "EPG5000",
++	     "EnGenius EPG5000",
++	     epg5000_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-esr1750.c linux-4.1.13/arch/mips/ath79/mach-esr1750.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-esr1750.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-esr1750.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,177 @@
++/*
++ *  EnGenius ESR1750 board support
++ *
++ *  Copyright (c) 2014 Jon Suphammer <jon@suphammer.net>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define ESR1750_GPIO_LED_WLAN_5G	23
++#define ESR1750_GPIO_LED_WLAN_2G	13
++#define ESR1750_GPIO_LED_POWER_AMBER	2
++#define ESR1750_GPIO_LED_WPS_AMBER	22
++#define ESR1750_GPIO_LED_WPS_BLUE	19
++
++#define ESR1750_GPIO_BTN_WPS		16
++#define ESR1750_GPIO_BTN_RESET		17
++
++#define ESR1750_KEYS_POLL_INTERVAL	20	/* msecs */
++#define ESR1750_KEYS_DEBOUNCE_INTERVAL	(3 * ESR1750_KEYS_POLL_INTERVAL)
++
++#define ESR1750_CALDATA_ADDR 0x1fff0000
++#define ESR1750_WMAC_CALDATA_OFFSET	0x1000
++#define ESR1750_PCIE_CALDATA_OFFSET	0x5000
++
++#define ESR1750_NVRAM_ADDR	0x1f030000
++#define ESR1750_NVRAM_SIZE	0x10000
++
++static struct gpio_led esr1750_leds_gpio[] __initdata = {
++	{
++		.name		= "esr1750:amber:power",
++		.gpio		= ESR1750_GPIO_LED_POWER_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "esr1750:blue:wps",
++		.gpio		= ESR1750_GPIO_LED_WPS_BLUE,
++		.active_low	= 1,
++	},
++	{
++		.name		= "esr1750:amber:wps",
++		.gpio		= ESR1750_GPIO_LED_WPS_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "esr1750:blue:wlan-2g",
++		.gpio		= ESR1750_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "esr1750:blue:wlan-5g",
++		.gpio		= ESR1750_GPIO_LED_WLAN_5G,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button esr1750_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ESR1750_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ESR1750_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg esr1750_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++	.mac06_exchange_en = true,
++};
++
++static struct ar8327_platform_data esr1750_ar8327_data = {
++	.pad0_cfg = &esr1750_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info esr1750_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &esr1750_ar8327_data,
++	},
++};
++
++static int esr1750_get_mac(const char *name, char *mac)
++{
++	u8 *nvram = (u8 *) KSEG1ADDR(ESR1750_NVRAM_ADDR);
++	int err;
++
++	err = ath79_nvram_parse_mac_addr(nvram, ESR1750_NVRAM_SIZE,
++					 name, mac);
++	if (err) {
++		pr_err("no MAC address found for %s\n", name);
++		return false;
++	}
++
++	return true;
++}
++
++static void __init esr1750_setup(void)
++{
++	u8 *caldata = (u8 *) KSEG1ADDR(ESR1750_CALDATA_ADDR);
++	u8 mac1[ETH_ALEN];
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(esr1750_leds_gpio),
++					esr1750_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, ESR1750_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(esr1750_gpio_keys),
++					esr1750_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	ath79_register_mdio(0, 0x0);
++
++	mdiobus_register_board_info(esr1750_mdio0_info,
++					ARRAY_SIZE(esr1750_mdio0_info));
++
++	/* GMAC0 is connected to an QCA8327N switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	if (esr1750_get_mac("ethaddr=", mac1))
++		ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++
++	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++	ath79_register_eth(0);
++
++	ath79_register_wmac(caldata + ESR1750_WMAC_CALDATA_OFFSET, mac1);
++
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_ESR1750, "ESR1750",
++	     "EnGenius ESR1750",
++	     esr1750_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-esr900.c linux-4.1.13/arch/mips/ath79/mach-esr900.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-esr900.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-esr900.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,200 @@
++/*
++ *  EnGenius ESR900 board support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#define pr_fmt(fmt) "esr900: " fmt
++
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define ESR900_GPIO_LED_POWER           2
++#define ESR900_GPIO_LED_WLAN_2G         13
++#define ESR900_GPIO_LED_WPS_BLUE        19
++#define ESR900_GPIO_LED_WPS_AMBER       22
++#define ESR900_GPIO_LED_WLAN_5G         23
++
++#define ESR900_GPIO_BTN_WPS             16
++#define ESR900_GPIO_BTN_RESET           17
++
++#define ESR900_KEYS_POLL_INTERVAL       20 /* msecs */
++#define ESR900_KEYS_DEBOUNCE_INTERVAL   (3 * ESR900_KEYS_POLL_INTERVAL)
++
++#define ESR900_CALDATA_ADDR             0x1fff0000
++#define ESR900_WMAC_CALDATA_OFFSET      0x1000
++#define ESR900_PCIE_CALDATA_OFFSET      0x5000
++
++#define ESR900_CONFIG_ADDR              0x1f030000
++#define ESR900_CONFIG_SIZE              0x10000
++
++#define ESR900_LAN_PHYMASK              BIT(0)
++#define ESR900_WAN_PHYMASK              BIT(5)
++#define ESR900_MDIO_MASK                (~(ESR900_LAN_PHYMASK | ESR900_WAN_PHYMASK))
++
++static struct gpio_led esr900_leds_gpio[] __initdata = {
++	{
++		.name		= "engenius:amber:power",
++		.gpio		= ESR900_GPIO_LED_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "engenius:blue:wlan-2g",
++		.gpio		= ESR900_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "engenius:blue:wps",
++		.gpio		= ESR900_GPIO_LED_WPS_BLUE,
++		.active_low	= 1,
++	},
++	{
++		.name		= "engenius:amber:wps",
++		.gpio		= ESR900_GPIO_LED_WPS_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "engenius:blue:wlan-5g",
++		.gpio		= ESR900_GPIO_LED_WLAN_5G,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button esr900_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ESR900_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ESR900_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg esr900_ar8327_pad0_cfg = {
++	/* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_pad_cfg esr900_ar8327_pad6_cfg = {
++	/* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
++	.mode = AR8327_PAD_MAC_SGMII,
++	.rxclk_delay_en = true,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
++};
++
++static struct ar8327_platform_data esr900_ar8327_data = {
++	.pad0_cfg = &esr900_ar8327_pad0_cfg,
++	.pad6_cfg = &esr900_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info esr900_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &esr900_ar8327_data,
++	},
++};
++
++static void __init esr900_setup(void)
++{
++	const char *config = (char *) KSEG1ADDR(ESR900_CONFIG_ADDR);
++	u8 *art = (u8 *) KSEG1ADDR(ESR900_CALDATA_ADDR);
++	u8 lan_mac[ETH_ALEN];
++	u8 wlan0_mac[ETH_ALEN];
++	u8 wlan1_mac[ETH_ALEN];
++
++	if (ath79_nvram_parse_mac_addr(config, ESR900_CONFIG_SIZE,
++				       "ethaddr=", lan_mac) == 0) {
++		ath79_init_local_mac(ath79_eth0_data.mac_addr, lan_mac);
++		ath79_init_mac(wlan0_mac, lan_mac, 0);
++		ath79_init_mac(wlan1_mac, lan_mac, 1);
++	} else {
++		pr_err("could not find ethaddr in u-boot environment\n");
++	}
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(esr900_leds_gpio),
++					esr900_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, ESR900_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(esr900_gpio_keys),
++					esr900_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_wmac(art + ESR900_WMAC_CALDATA_OFFSET, wlan0_mac);
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	ath79_register_mdio(0, 0x0);
++
++	mdiobus_register_board_info(esr900_mdio0_info,
++				    ARRAY_SIZE(esr900_mdio0_info));
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = ESR900_LAN_PHYMASK;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++	ath79_register_eth(1);
++
++	ap91_pci_init(art + ESR900_PCIE_CALDATA_OFFSET, wlan1_mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_ESR900, "ESR900", "EnGenius ESR900", esr900_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ew-dorin.c linux-4.1.13/arch/mips/ath79/mach-ew-dorin.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ew-dorin.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ew-dorin.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,150 @@
++/*
++ *  EW Dorin board support
++ *  (based on Atheros Ref. Design AP121)
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2012-2015 Embedded Wireless GmbH    www.80211.de
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DORIN_KEYS_POLL_INTERVAL	20	/* msecs */
++#define DORIN_KEYS_DEBOUNCE_INTERVAL	(3 * DORIN_KEYS_POLL_INTERVAL)
++
++#define DORIN_CALDATA_OFFSET		0x1000
++#define DORIN_WMAC_MAC_OFFSET		0x1002
++
++#define DORIN_GPIO_LED_21		21
++#define DORIN_GPIO_LED_22		22
++#define DORIN_GPIO_LED_STATUS	23
++
++#define DORIN_GPIO_BTN_JUMPSTART	11
++#define DORIN_GPIO_BTN_RESET		6
++
++static struct gpio_led dorin_leds_gpio[] __initdata = {
++	{
++		.name		= "dorin:green:led21",
++		.gpio		= DORIN_GPIO_LED_21,
++		.active_low	= 1,
++	},
++	{
++		.name		= "dorin:green:led22",
++		.gpio		= DORIN_GPIO_LED_22,
++		.active_low	= 1,
++	},
++	{
++		.name		= "dorin:green:status",
++		.gpio		= DORIN_GPIO_LED_STATUS,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button dorin_gpio_keys[] __initdata = {
++	{
++		.desc		= "jumpstart button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DORIN_GPIO_BTN_JUMPSTART,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= DORIN_GPIO_BTN_RESET,
++		.active_low	= 0,
++	}
++};
++
++static void __init ew_dorin_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	static u8 mac[6];
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_usb();
++
++	if (ar93xx_wmac_read_mac_address(mac)) {
++		ath79_register_wmac(NULL, NULL);
++	} else {
++		ath79_register_wmac(art + DORIN_CALDATA_OFFSET,
++				    art + DORIN_WMAC_MAC_OFFSET);
++		memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac));
++	}
++
++	mac[3] |= 0x40;
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio),
++				 dorin_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dorin_gpio_keys),
++					dorin_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_EW_DORIN, "EW-DORIN", "EmbWir-Dorin",
++	     ew_dorin_setup);
++
++
++static void __init ew_dorin_router_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	static u8 mac[6];
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_usb();
++
++	if (ar93xx_wmac_read_mac_address(mac)) {
++		ath79_register_wmac(NULL, NULL);
++	} else {
++		ath79_register_wmac(art + DORIN_CALDATA_OFFSET,
++				    art + DORIN_WMAC_MAC_OFFSET);
++		memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac));
++	}
++
++	mac[3] |= 0x40;
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++
++	mac[3] &= 0x3F;
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_setup_ar933x_phy4_switch(true, true);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++
++	/* WAN port */
++	ath79_register_eth(0);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio),
++				 dorin_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(dorin_gpio_keys),
++					dorin_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_EW_DORIN_ROUTER, "EW-DORIN-ROUTER",
++	     "EmbWir-Dorin-Router", ew_dorin_router_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-f9k1115v2.c linux-4.1.13/arch/mips/ath79/mach-f9k1115v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-f9k1115v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-f9k1115v2.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,190 @@
++/*
++ *  Belkin AC1750DB (F9K1115V2) board support
++ *
++ *  Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define F9K1115V2_GPIO_LED_USB2		4
++#define F9K1115V2_GPIO_LED_WPS_AMBER	14
++#define F9K1115V2_GPIO_LED_STATUS_AMBER	15
++#define F9K1115V2_GPIO_LED_WPS_BLUE	19
++#define F9K1115V2_GPIO_LED_STATUS_BLUE	20
++
++#define F9K1115V2_GPIO_BTN_WPS		16
++#define F9K1115V2_GPIO_BTN_RESET	17
++
++#define F9K1115V2_GPIO_USB2_POWER	21
++
++#define F9K1115V2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define F9K1115V2_KEYS_DEBOUNCE_INTERVAL (3 * F9K1115V2_KEYS_POLL_INTERVAL)
++
++#define F9K1115V2_WAN_MAC_OFFSET	0
++#define F9K1115V2_LAN_MAC_OFFSET	6
++#define F9K1115V2_WMAC_CALDATA_OFFSET	0x1000
++#define F9K1115V2_PCIE_CALDATA_OFFSET	0x5000
++
++static struct gpio_led f9k1115v2_leds_gpio[] __initdata = {
++	{
++		.name		= "belkin:amber:status",
++		.gpio		= F9K1115V2_GPIO_LED_STATUS_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "belkin:blue:status",
++		.gpio		= F9K1115V2_GPIO_LED_STATUS_BLUE,
++		.active_low	= 1,
++	},
++	{
++		.name		= "belkin:blue:wps",
++		.gpio		= F9K1115V2_GPIO_LED_WPS_BLUE,
++		.active_low	= 1,
++	},
++	{
++		.name		= "belkin:amber:wps",
++		.gpio		= F9K1115V2_GPIO_LED_WPS_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "belkin:green:usb2",
++		.gpio		= F9K1115V2_GPIO_LED_USB2,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button f9k1115v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = F9K1115V2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= F9K1115V2_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = F9K1115V2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= F9K1115V2_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg f9k1115v2_ar8327_pad0_cfg = {
++	/* Use the RGMII interface for the GMAC0 of the AR8337 switch */
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++	.mac06_exchange_en = true,
++};
++
++static struct ar8327_pad_cfg f9k1115v2_ar8327_pad6_cfg = {
++	/* Use the SGMII interface for the GMAC6 of the AR8337 switch */
++	.mode = AR8327_PAD_MAC_SGMII,
++	.rxclk_delay_en = true,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
++};
++
++static struct ar8327_platform_data f9k1115v2_ar8327_data = {
++	.pad0_cfg = &f9k1115v2_ar8327_pad0_cfg,
++	.pad6_cfg = &f9k1115v2_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info f9k1115v2_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &f9k1115v2_ar8327_data,
++	},
++};
++
++static void __init f9k1115v2_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(f9k1115v2_leds_gpio),
++				 f9k1115v2_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, F9K1115V2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(f9k1115v2_gpio_keys),
++					f9k1115v2_gpio_keys);
++
++	ath79_register_wmac(art + F9K1115V2_WMAC_CALDATA_OFFSET, NULL);
++
++	ath79_register_mdio(0, 0x0);
++	mdiobus_register_board_info(f9k1115v2_mdio0_info,
++				    ARRAY_SIZE(f9k1115v2_mdio0_info));
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       art + F9K1115V2_WAN_MAC_OFFSET, 0);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr,
++		       art + F9K1115V2_LAN_MAC_OFFSET, 0);
++
++	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(1);
++
++	ath79_register_pci();
++
++	ath79_register_usb();
++	gpio_request_one(F9K1115V2_GPIO_USB2_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB2 power");
++}
++
++MIPS_MACHINE(ATH79_MACH_F9K1115V2, "F9K1115V2", "Belkin AC1750DB",
++	     f9k1115v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-gl-ar150.c linux-4.1.13/arch/mips/ath79/mach-gl-ar150.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-gl-ar150.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-gl-ar150.c	2015-12-04 18:27:35.461807609 +0100
+@@ -0,0 +1,125 @@
++/*
++ *  GL_ar150 board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2013 alzhao <alzhao@gmail.com>
++ *  Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++*/
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define GL_AR150_GPIO_LED_WLAN		   0
++#define GL_AR150_GPIO_LED_LAN		   13
++#define GL_AR150_GPIO_LED_WAN		   15 
++
++#define GL_AR150_GPIO_BIN_USB         6
++#define GL_AR150_GPIO_BTN_MANUAL      7
++#define GL_AR150_GPIO_BTN_AUTO	   	   8
++#define GL_AR150_GPIO_BTN_RESET	   11
++
++#define GL_AR150_KEYS_POLL_INTERVAL   20	/* msecs */
++#define GL_AR150_KEYS_DEBOUNCE_INTERVAL	(3 * GL_AR150_KEYS_POLL_INTERVAL)
++
++#define GL_AR150_MAC0_OFFSET	0x0000
++#define GL_AR150_MAC1_OFFSET	0x0000
++#define GL_AR150_CALDATA_OFFSET	0x1000
++#define GL_AR150_WMAC_MAC_OFFSET	0x0000
++
++static struct gpio_led gl_ar150_leds_gpio[] __initdata = {
++	{
++		.name = "gl_ar150:wlan",
++		.gpio = GL_AR150_GPIO_LED_WLAN,
++		.active_low = 0,
++	},
++	{
++		.name = "gl_ar150:lan",
++		.gpio = GL_AR150_GPIO_LED_LAN,
++		.active_low = 0,
++	},
++	{
++		.name = "gl_ar150:wan",
++		.gpio = GL_AR150_GPIO_LED_WAN,
++		.active_low = 0,
++ 		.default_state = 1,
++	},
++};
++
++static struct gpio_keys_button gl_ar150_gpio_keys[] __initdata = {
++	{
++		.desc = "BTN_7",
++		.type = EV_KEY,
++		.code = BTN_7,
++		.debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
++		.gpio = GL_AR150_GPIO_BTN_MANUAL,
++		.active_low = 0,
++	},
++	{
++		.desc = "BTN_8",
++		.type = EV_KEY,
++		.code = BTN_8,
++		.debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
++		.gpio = GL_AR150_GPIO_BTN_AUTO,
++		.active_low = 0,
++	},
++	{
++		.desc = "reset",
++		.type = EV_KEY,
++		.code = KEY_RESTART,
++		.debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
++		.gpio = GL_AR150_GPIO_BTN_RESET,
++		.active_low = 0,
++	},
++};
++
++static void __init gl_ar150_setup(void)
++{
++
++	/* ART base address */
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	/* register flash. */
++	ath79_register_m25p80(NULL);
++
++	/* register gpio LEDs and keys */
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar150_leds_gpio),
++				 gl_ar150_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, GL_AR150_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(gl_ar150_gpio_keys),
++					gl_ar150_gpio_keys);
++
++	/* enable usb */
++	gpio_request_one(GL_AR150_GPIO_BIN_USB,
++				 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++	 			 "USB power");
++	ath79_register_usb();
++	
++	/* register eth0 as WAN, eth1 as LAN */
++	ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR150_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR150_MAC1_OFFSET, 0);
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	/* register wireless mac with cal data */
++	ath79_register_wmac(art + GL_AR150_CALDATA_OFFSET, art + GL_AR150_WMAC_MAC_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_GL_AR150, "GL-AR150", "GL AR150",gl_ar150_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-gl-ar300.c linux-4.1.13/arch/mips/ath79/mach-gl-ar300.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-gl-ar300.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-gl-ar300.c	2015-12-04 18:27:35.461807609 +0100
+@@ -0,0 +1,103 @@
++/*
++ *  Domino board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2013 alzhao <alzhao@gmail.com>
++ *  Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++*/
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define GL_AR300_GPIO_LED_WLAN	13
++#define GL_AR300_GPIO_LED_WAN	14
++#define GL_AR300_GPIO_BTN_RESET	16
++
++
++#define GL_AR300_KEYS_POLL_INTERVAL	20	/* msecs */
++#define GL_AR300_KEYS_DEBOUNCE_INTERVAL	(3 * GL_AR300_KEYS_POLL_INTERVAL)
++
++#define GL_AR300_MAC0_OFFSET	0x0000
++#define	GL_AR300_MAC1_OFFSET	0x0000
++#define GL_AR300_CALDATA_OFFSET	0x1000
++#define GL_AR300_WMAC_MAC_OFFSET	0x0000
++
++static struct gpio_led gl_ar300_leds_gpio[] __initdata = {
++	{
++		.name = "gl_ar300:wlan",
++		.gpio = GL_AR300_GPIO_LED_WLAN,
++		.active_low = 1,
++	},
++	{
++		.name = "gl_ar300:wan",
++		.gpio = GL_AR300_GPIO_LED_WAN,
++		.active_low = 1,
++	},
++};
++
++static struct gpio_keys_button gl_ar300_gpio_keys[] __initdata = {
++	{
++		.desc = "reset",
++		.type = EV_KEY,
++		.code = KEY_RESTART,
++		.debounce_interval = GL_AR300_KEYS_DEBOUNCE_INTERVAL,
++		.gpio = GL_AR300_GPIO_BTN_RESET,
++		.active_low = 1,
++	},
++};
++
++static void __init gl_ar300_setup(void)
++{
++
++	/* ART base address */
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	/* register flash. */
++	ath79_register_m25p80(NULL);
++
++	/* register gpio LEDs and keys */
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300_leds_gpio),
++				 gl_ar300_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, GL_AR300_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(gl_ar300_gpio_keys),
++					gl_ar300_gpio_keys);
++
++	/* enable usb */
++	ath79_register_usb();
++	ath79_register_mdio(1, 0x0);
++
++	/* register eth0 as WAN, eth1 as LAN */
++	ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR300_MAC0_OFFSET, 0);
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR300_MAC1_OFFSET, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++
++	/* register wireless mac with cal data */
++	ath79_register_wmac(art + GL_AR300_CALDATA_OFFSET, art + GL_AR300_WMAC_MAC_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_GL_AR300, "GL-AR300", "GL AR300",gl_ar300_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-gl-domino.c linux-4.1.13/arch/mips/ath79/mach-gl-domino.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-gl-domino.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-gl-domino.c	2015-12-04 18:27:35.461807609 +0100
+@@ -0,0 +1,136 @@
++/*
++ *  Domino board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2013 alzhao <alzhao@gmail.com>
++ *  Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++*/
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define DOMINO_GPIO_LED_WLAN		0
++#define DOMINO_GPIO_LED_WAN			17
++#define DOMINO_GPIO_LED_USB			1
++#define DOMINO_GPIO_LED_LAN1		13
++#define DOMINO_GPIO_LED_LAN2		14
++#define DOMINO_GPIO_LED_LAN3		15
++#define DOMINO_GPIO_LED_LAN4		16
++#define DOMINO_GPIO_LED_SYS			27
++#define DOMINO_GPIO_LED_WPS			26
++#define DOMINO_GPIO_USB_POWER		6
++
++#define DOMINO_GPIO_BTN_RESET		11
++#define DOMINO_GPIO_BTN_WPS			20
++
++#define DOMINO_KEYS_POLL_INTERVAL	20	/* msecs */
++#define DOMINO_KEYS_DEBOUNCE_INTERVAL	(3 * DOMINO_KEYS_POLL_INTERVAL)
++
++#define DOMINO_MAC0_OFFSET	0x0000
++#define	DOMINO_MAC1_OFFSET	0x0000
++#define DOMINO_CALDATA_OFFSET	0x1000
++#define DOMINO_WMAC_MAC_OFFSET	0x0000
++
++static struct gpio_led domino_leds_gpio[] __initdata = {
++	{
++		.name = "domino:blue:wlan",
++		.gpio = DOMINO_GPIO_LED_WLAN,
++		.active_low = 0,
++	},
++	{
++		.name = "domino:red:wan",
++		.gpio = DOMINO_GPIO_LED_WAN,
++		.active_low = 1,
++	},
++	{
++		.name = "domino:white:usb",
++		.gpio = DOMINO_GPIO_LED_USB,
++		.active_low = 0,
++	},
++	{
++		.name = "domino:green:lan1",
++		.gpio = DOMINO_GPIO_LED_LAN1,
++		.active_low = 0,
++	},
++	{
++		.name = "domino:yellow:wps",
++		.gpio = DOMINO_GPIO_LED_WPS,
++		.active_low = 1,
++	},
++	{
++		.name = "domino:orange:sys",
++		.gpio = DOMINO_GPIO_LED_SYS,
++		.active_low = 1,
++	},
++};
++
++static struct gpio_keys_button domino_gpio_keys[] __initdata = {
++	{
++		.desc = "reset",
++		.type = EV_KEY,
++		.code = KEY_RESTART,
++		.debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL,
++		.gpio = DOMINO_GPIO_BTN_RESET,
++		.active_low = 0,
++	},
++	{
++		.desc = "wps",
++		.type = EV_KEY,
++		.code = KEY_WPS_BUTTON,
++		.debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL,
++		.gpio = DOMINO_GPIO_BTN_WPS,
++		.active_low = 0,
++	}
++};
++
++static void __init domino_setup(void)
++{
++
++	/* ART base address */
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	/* register flash. */
++	ath79_register_m25p80(NULL);
++
++	/* register gpio LEDs and keys */
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(domino_leds_gpio),
++				 domino_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, DOMINO_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(domino_gpio_keys),
++					domino_gpio_keys);
++
++	gpio_request_one(DOMINO_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	/* enable usb */
++	ath79_register_usb();
++
++	/* register eth0 as WAN, eth1 as LAN */
++	ath79_init_mac(ath79_eth0_data.mac_addr, art+DOMINO_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art+DOMINO_MAC1_OFFSET, 0);
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	/* register wireless mac with cal data */
++	ath79_register_wmac(art + DOMINO_CALDATA_OFFSET, art + DOMINO_WMAC_MAC_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_GL_DOMINO, "DOMINO", "Domino Pi", domino_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-gl-inet.c linux-4.1.13/arch/mips/ath79/mach-gl-inet.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-gl-inet.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-gl-inet.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,104 @@
++/*
++ *  GL-CONNECT iNet board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2013 alzhao <alzhao@gmail.com>
++ *  Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define GL_INET_GPIO_LED_WLAN		0
++#define GL_INET_GPIO_LED_LAN		13
++#define GL_INET_GPIO_BTN_RESET		11
++
++#define GL_INET_KEYS_POLL_INTERVAL	20	/* msecs */
++#define GL_INET_KEYS_DEBOUNCE_INTERVAL	(3 * GL_INET_KEYS_POLL_INTERVAL)
++
++static const char * gl_inet_part_probes[] = {
++	"tp-link", /* dont change, this will use tplink parser */
++	NULL ,
++};
++
++static struct flash_platform_data gl_inet_flash_data = {
++	.part_probes = gl_inet_part_probes,
++};
++
++static struct gpio_led gl_inet_leds_gpio[] __initdata = {
++	{
++		.name = "gl-connect:red:wlan",
++		.gpio = GL_INET_GPIO_LED_WLAN,
++		.active_low = 0,
++	},
++	{
++		.name = "gl-connect:green:lan",
++		.gpio = GL_INET_GPIO_LED_LAN,
++		.active_low = 0,
++		.default_state = 1,
++	},
++};
++
++static struct gpio_keys_button gl_inet_gpio_keys[] __initdata = {
++	{
++		.desc = "reset",
++		.type = EV_KEY,
++		.code = KEY_RESTART,
++		.debounce_interval = GL_INET_KEYS_DEBOUNCE_INTERVAL,
++		.gpio = GL_INET_GPIO_BTN_RESET,
++		.active_low = 0,
++	}
++};
++
++static void __init gl_inet_setup(void)
++{
++	/* get the mac address which is stored in the 1st 64k uboot MTD */
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++
++	/* get the art address, which is the last 64K. By using
++	   0x1fff1000, it doesn't matter it is 4M, 8M or 16M flash */
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	/* register flash. MTD will use tp-link parser to parser MTD */
++	ath79_register_m25p80(&gl_inet_flash_data);
++
++	/* register gpio LEDs and keys */
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_inet_leds_gpio),
++				 gl_inet_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, GL_INET_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(gl_inet_gpio_keys),
++					gl_inet_gpio_keys);
++
++	/* enable usb */
++	ath79_register_usb();
++
++	/* register eth0 as WAN, eth1 as LAN */
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++	ath79_register_eth(1);
++
++	/* register wireless mac with cal data */
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_GL_INET, "GL-INET", "GL-CONNECT INET v1",
++	     gl_inet_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-gs-minibox-v1.c linux-4.1.13/arch/mips/ath79/mach-gs-minibox-v1.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-gs-minibox-v1.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-gs-minibox-v1.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,85 @@
++/*
++ *  Gainstrong MiniBox V1.0 board support
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define GS_MINIBOX_V1_GPIO_BTN_RESET	11
++
++#define GS_MINIBOX_V1_GPIO_LED_SYSTEM	1
++
++#define GS_MINIBOX_V1_KEYS_POLL_INTERVAL	20	/* msecs */
++#define GS_MINIBOX_V1_KEYS_DEBOUNCE_INTERVAL (3 * GS_MINIBOX_V1_KEYS_POLL_INTERVAL)
++
++static const char *gs_minibox_v1_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data gs_minibox_v1_flash_data = {
++	.part_probes	= gs_minibox_v1_part_probes,
++};
++
++static struct gpio_led gs_minibox_v1_leds_gpio[] __initdata = {
++	{
++		.name		= "minibox-v1:green:system",
++		.gpio		= GS_MINIBOX_V1_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button gs_minibox_v1_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = GS_MINIBOX_V1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= GS_MINIBOX_V1_GPIO_BTN_RESET,
++		.active_low	= 0,
++	},
++};
++
++static void __init gs_minibox_v1_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_minibox_v1_leds_gpio),
++				 gs_minibox_v1_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, GS_MINIBOX_V1_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(gs_minibox_v1_gpio_keys),
++					gs_minibox_v1_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_m25p80(&gs_minibox_v1_flash_data);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_GS_MINIBOX_V1, "MINIBOX-V1",
++	     "MiniBox V1.0", gs_minibox_v1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-gs-oolite.c linux-4.1.13/arch/mips/ath79/mach-gs-oolite.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-gs-oolite.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-gs-oolite.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,103 @@
++/*
++ *  Oolite board support
++ *
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "dev-usb.h"
++
++#define GS_OOLITE_GPIO_BTN6		6
++#define GS_OOLITE_GPIO_BTN7		7
++#define GS_OOLITE_GPIO_BTN_RESET	11
++
++#define GS_OOLITE_GPIO_LED_SYSTEM	27
++
++#define GS_OOLITE_KEYS_POLL_INTERVAL	20	/* msecs */
++#define GS_OOLITE_KEYS_DEBOUNCE_INTERVAL (3 * GS_OOLITE_KEYS_POLL_INTERVAL)
++
++static const char *gs_oolite_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data gs_oolite_flash_data = {
++	.part_probes	= gs_oolite_part_probes,
++};
++
++static struct gpio_led gs_oolite_leds_gpio[] __initdata = {
++	{
++		.name		= "oolite:red:system",
++		.gpio		= GS_OOLITE_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button gs_oolite_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = GS_OOLITE_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= GS_OOLITE_GPIO_BTN_RESET,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "BTN_6",
++		.type		= EV_KEY,
++		.code		= BTN_6,
++		.debounce_interval = GS_OOLITE_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= GS_OOLITE_GPIO_BTN6,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "BTN_7",
++		.type		= EV_KEY,
++		.code		= BTN_7,
++		.debounce_interval = GS_OOLITE_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= GS_OOLITE_GPIO_BTN7,
++		.active_low	= 0,
++	},
++};
++
++static void __init gs_oolite_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_oolite_leds_gpio),
++				 gs_oolite_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, GS_OOLITE_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(gs_oolite_gpio_keys),
++					gs_oolite_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_m25p80(&gs_oolite_flash_data);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_GS_OOLITE, "GS-OOLITE",
++	     "Oolite V1.0", gs_oolite_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-hiwifi-hc6361.c linux-4.1.13/arch/mips/ath79/mach-hiwifi-hc6361.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-hiwifi-hc6361.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-hiwifi-hc6361.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,115 @@
++/*
++ *  HiWiFi HC6361 board support
++ *
++ *  Copyright (C) 2012-2013 eric
++ *  Copyright (C) 2014 Yousong Zhou <yszhou4tech@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/proc_fs.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define HIWIFI_HC6361_GPIO_LED_WLAN_2P4		0	/* 2.4G WLAN LED */
++#define HIWIFI_HC6361_GPIO_LED_SYSTEM		1	/* System LED */
++#define HIWIFI_HC6361_GPIO_LED_INTERNET		27	/* Internet LED */
++
++#define HIWIFI_HC6361_GPIO_USBPOWER		20	/* USB power control */
++#define HIWIFI_HC6361_GPIO_BTN_RST		11	/* Reset button */
++
++#define HIWIFI_HC6361_KEYS_POLL_INTERVAL	20	/* msecs */
++#define HIWIFI_HC6361_KEYS_DEBOUNCE_INTERVAL	\
++	(3 * HIWIFI_HC6361_KEYS_POLL_INTERVAL)
++
++static struct gpio_led hiwifi_leds_gpio[] __initdata = {
++	{
++		.name		= "hiwifi:blue:wlan-2p4",
++		.gpio		= HIWIFI_HC6361_GPIO_LED_WLAN_2P4,
++		.active_low	= 1,
++	}, {
++		.name		= "hiwifi:blue:system",
++		.gpio		= HIWIFI_HC6361_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "hiwifi:blue:internet",
++		.gpio		= HIWIFI_HC6361_GPIO_LED_INTERNET,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button hiwifi_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = HIWIFI_HC6361_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= HIWIFI_HC6361_GPIO_BTN_RST,
++		.active_low	= 1,
++	}
++};
++
++static void __init get_mac_from_bdinfo(u8 *mac, void *bdinfo)
++{
++	if (sscanf(bdinfo, "fac_mac = %2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx",
++				&mac[0], &mac[1], &mac[2], &mac[3],
++				&mac[4], &mac[5]) == 6) {
++		return;
++	}
++
++	printk(KERN_WARNING "Parsing MAC address failed.\n");
++	memcpy(mac, "\x00\xba\xbe\x00\x00\x00", 6);
++}
++
++static void __init hiwifi_hc6361_setup(void)
++{
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 mac[6];
++
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_m25p80(NULL);
++	ath79_gpio_function_enable(
++			AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++			AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++			AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++			AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++			AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(hiwifi_leds_gpio),
++			hiwifi_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, HIWIFI_HC6361_KEYS_POLL_INTERVAL,
++			ARRAY_SIZE(hiwifi_gpio_keys),
++			hiwifi_gpio_keys);
++	gpio_request_one(HIWIFI_HC6361_GPIO_USBPOWER,
++			GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			"USB power");
++	ath79_register_usb();
++
++	get_mac_from_bdinfo(mac, (void *) KSEG1ADDR(0x1f010180));
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_HIWIFI_HC6361, "HiWiFi-HC6361",
++		"HiWiFi HC6361", hiwifi_hc6361_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-hornet-ub.c linux-4.1.13/arch/mips/ath79/mach-hornet-ub.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-hornet-ub.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-hornet-ub.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,142 @@
++/*
++ *  ALFA NETWORK Hornet-UB board support
++ *
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define HORNET_UB_GPIO_LED_WLAN		0
++#define HORNET_UB_GPIO_LED_USB		1
++#define HORNET_UB_GPIO_LED_LAN		13
++#define HORNET_UB_GPIO_LED_WAN		17
++#define HORNET_UB_GPIO_LED_WPS		27
++#define HORNET_UB_GPIO_EXT_LNA		28
++
++#define HORNET_UB_GPIO_BTN_RESET	12
++#define HORNET_UB_GPIO_BTN_WPS		11
++
++#define HORNET_UB_GPIO_USB_POWER	26
++
++#define HORNET_UB_KEYS_POLL_INTERVAL	20	/* msecs */
++#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL	(3 * HORNET_UB_KEYS_POLL_INTERVAL)
++
++#define HORNET_UB_MAC0_OFFSET		0x0000
++#define HORNET_UB_MAC1_OFFSET		0x0006
++#define HORNET_UB_CALDATA_OFFSET	0x1000
++
++static struct gpio_led hornet_ub_leds_gpio[] __initdata = {
++	{
++		.name		= "alfa:blue:lan",
++		.gpio		= HORNET_UB_GPIO_LED_LAN,
++		.active_low	= 0,
++	},
++	{
++		.name		= "alfa:blue:usb",
++		.gpio		= HORNET_UB_GPIO_LED_USB,
++		.active_low	= 0,
++	},
++	{
++		.name		= "alfa:blue:wan",
++		.gpio		= HORNET_UB_GPIO_LED_WAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "alfa:blue:wlan",
++		.gpio		= HORNET_UB_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},
++	{
++		.name		= "alfa:blue:wps",
++		.gpio		= HORNET_UB_GPIO_LED_WPS,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= HORNET_UB_GPIO_BTN_WPS,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= HORNET_UB_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static void __init hornet_ub_gpio_setup(void)
++{
++	u32 t;
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
++	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
++
++	gpio_request_one(HORNET_UB_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	gpio_request_one(HORNET_UB_GPIO_EXT_LNA,
++			GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			"external LNA0");
++
++}
++
++static void __init hornet_ub_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	hornet_ub_gpio_setup();
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio),
++					hornet_ub_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(hornet_ub_gpio_keys),
++					 hornet_ub_gpio_keys);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr,
++			art + HORNET_UB_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++			art + HORNET_UB_MAC1_OFFSET, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL);
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORK Hornet-UB",
++	     hornet_ub_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ja76pf.c linux-4.1.13/arch/mips/ath79/mach-ja76pf.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ja76pf.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ja76pf.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,190 @@
++/*
++ *  jjPlus JA76PF board support
++ */
++
++#include <linux/i2c.h>
++#include <linux/i2c-gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define JA76PF_KEYS_POLL_INTERVAL	20	/* msecs */
++#define JA76PF_KEYS_DEBOUNCE_INTERVAL	(3 * JA76PF_KEYS_POLL_INTERVAL)
++
++#define JA76PF_GPIO_I2C_SCL		0
++#define JA76PF_GPIO_I2C_SDA		1
++#define JA76PF_GPIO_LED_1		5
++#define JA76PF_GPIO_LED_2		4
++#define JA76PF_GPIO_LED_3		3
++#define JA76PF_GPIO_BTN_RESET		11
++
++static struct gpio_led ja76pf_leds_gpio[] __initdata = {
++	{
++		.name		= "jjplus:green:led1",
++		.gpio		= JA76PF_GPIO_LED_1,
++		.active_low	= 1,
++	}, {
++		.name		= "jjplus:green:led2",
++		.gpio		= JA76PF_GPIO_LED_2,
++		.active_low	= 1,
++	}, {
++		.name		= "jjplus:green:led3",
++		.gpio		= JA76PF_GPIO_LED_3,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= JA76PF_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = {
++	.sda_pin	= JA76PF_GPIO_I2C_SDA,
++	.scl_pin	= JA76PF_GPIO_I2C_SCL,
++};
++
++static struct platform_device ja76pf_i2c_gpio_device = {
++	.name		= "i2c-gpio",
++	.id		= 0,
++	.dev = {
++		.platform_data  = &ja76pf_i2c_gpio_data,
++	}
++};
++
++static const char *ja76pf_part_probes[] = {
++	"RedBoot",
++	NULL,
++};
++
++static struct flash_platform_data ja76pf_flash_data = {
++	.part_probes	= ja76pf_part_probes,
++};
++
++#define JA76PF_WAN_PHYMASK	(1 << 4)
++#define JA76PF_LAN_PHYMASK	((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3))
++#define JA76PF_MDIO_PHYMASK	(JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK)
++
++static void __init ja76pf_init(void)
++{
++	ath79_register_m25p80(&ja76pf_flash_data);
++
++	ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	platform_device_register(&ja76pf_i2c_gpio_device);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio),
++					ja76pf_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(ja76pf_gpio_keys),
++					 ja76pf_gpio_keys);
++
++	ath79_register_usb();
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init);
++
++#define JA76PF2_GPIO_LED_D2		5
++#define JA76PF2_GPIO_LED_D3		4
++#define JA76PF2_GPIO_LED_D4		3
++#define JA76PF2_GPIO_BTN_RESET		7
++#define JA76PF2_GPIO_BTN_WPS		8
++
++static struct gpio_led ja76pf2_leds_gpio[] __initdata = {
++	{
++		.name		= "jjplus:green:led1",
++		.gpio		= JA76PF2_GPIO_LED_D2,
++		.active_low	= 1,
++	}, {
++		.name		= "jjplus:green:led2",
++		.gpio		= JA76PF2_GPIO_LED_D3,
++		.active_low	= 0,
++	}, {
++		.name		= "jjplus:green:led3",
++		.gpio		= JA76PF2_GPIO_LED_D4,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button ja76pf2_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= JA76PF2_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= JA76PF2_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++#define JA76PF2_LAN_PHYMASK	BIT(0)
++#define JA76PF2_WAN_PHYMASK	BIT(4)
++#define JA76PF2_MDIO_PHYMASK	(JA76PF2_LAN_PHYMASK | JA76PF2_WAN_PHYMASK)
++
++static void __init ja76pf2_init(void)
++{
++	ath79_register_m25p80(&ja76pf_flash_data);
++
++	ath79_register_mdio(0, ~JA76PF2_MDIO_PHYMASK);
++
++	/* MAC0 is connected to the CPU port of the AR8316 switch */
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++
++	/* MAC1 is connected to the PHY4 of the AR8316 switch */
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = BIT(4);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf2_leds_gpio),
++				 ja76pf2_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ja76pf2_gpio_keys),
++					ja76pf2_gpio_keys);
++
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_JA76PF2, "JA76PF2", "jjPlus JA76PF2", ja76pf2_init);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-jwap003.c linux-4.1.13/arch/mips/ath79/mach-jwap003.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-jwap003.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-jwap003.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,95 @@
++/*
++ *  jjPlus JWAP003 board support
++ *
++ */
++
++#include <linux/i2c.h>
++#include <linux/i2c-gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-m25p80.h"
++#include "dev-gpio-buttons.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define JWAP003_KEYS_POLL_INTERVAL	20	/* msecs */
++#define JWAP003_KEYS_DEBOUNCE_INTERVAL	(3 * JWAP003_KEYS_POLL_INTERVAL)
++
++#define JWAP003_GPIO_WPS	11
++#define JWAP003_GPIO_I2C_SCL	0
++#define JWAP003_GPIO_I2C_SDA	1
++
++static struct gpio_keys_button jwap003_gpio_keys[] __initdata = {
++	{
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= JWAP003_GPIO_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = {
++	.sda_pin	= JWAP003_GPIO_I2C_SDA,
++	.scl_pin	= JWAP003_GPIO_I2C_SCL,
++};
++
++static struct platform_device jwap003_i2c_gpio_device = {
++	.name		= "i2c-gpio",
++	.id		= 0,
++	.dev = {
++		.platform_data  = &jwap003_i2c_gpio_data,
++	}
++};
++
++static const char *jwap003_part_probes[] = {
++	"RedBoot",
++	NULL,
++};
++
++static struct flash_platform_data jwap003_flash_data = {
++	.part_probes	= jwap003_part_probes,
++};
++
++#define JWAP003_WAN_PHYMASK	BIT(0)
++#define JWAP003_LAN_PHYMASK	BIT(4)
++
++static void __init jwap003_init(void)
++{
++	ath79_register_m25p80(&jwap003_flash_data);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.has_ar8216 = 1;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK;
++	ath79_eth1_data.speed = SPEED_100;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	platform_device_register(&jwap003_i2c_gpio_device);
++
++	ath79_register_usb();
++
++	ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(jwap003_gpio_keys),
++					 jwap003_gpio_keys);
++
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mc-mac1200r.c linux-4.1.13/arch/mips/ath79/mach-mc-mac1200r.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mc-mac1200r.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mc-mac1200r.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,155 @@
++/*
++ *  MERCURY MAC1200R board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2013 Gui Iribarren <gui@altermundi.net>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define MAC1200R_GPIO_LED_WLAN2G	13
++#define MAC1200R_GPIO_LED_WLAN5G	17
++#define MAC1200R_GPIO_LED_SYSTEM	14
++#define MAC1200R_GPIO_LED_WPS		11
++#define MAC1200R_GPIO_LED_WAN		12
++#define MAC1200R_GPIO_LED_LAN1		15
++#define MAC1200R_GPIO_LED_LAN2		21
++#define MAC1200R_GPIO_LED_LAN3		22
++#define MAC1200R_GPIO_LED_LAN4		20
++
++#define MAC1200R_GPIO_BTN_WPS		16
++
++#define MAC1200R_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MAC1200R_KEYS_DEBOUNCE_INTERVAL	(3 * MAC1200R_KEYS_POLL_INTERVAL)
++
++#define MAC1200R_MAC0_OFFSET		0
++#define MAC1200R_MAC1_OFFSET		6
++#define MAC1200R_WMAC_CALDATA_OFFSET	0x1000
++#define MAC1200R_PCIE_CALDATA_OFFSET	0x5000
++
++static const char *mac1200r_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data mac1200r_flash_data = {
++	.part_probes	= mac1200r_part_probes,
++};
++
++static struct gpio_led mac1200r_leds_gpio[] __initdata = {
++	{
++		.name		= "mercury:green:wps",
++		.gpio		= MAC1200R_GPIO_LED_WPS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mercury:green:system",
++		.gpio		= MAC1200R_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mercury:green:wlan2g",
++		.gpio		= MAC1200R_GPIO_LED_WLAN2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mercury:green:wlan5g",
++		.gpio		= MAC1200R_GPIO_LED_WLAN5G,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button mac1200r_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MAC1200R_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MAC1200R_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++
++static void __init mac1200r_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(&mac1200r_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(mac1200r_leds_gpio),
++					mac1200r_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, MAC1200R_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mac1200r_gpio_keys),
++					mac1200r_gpio_keys);
++
++	ath79_init_mac(tmpmac, mac, 0);
++	ath79_wmac_disable_5ghz();
++	ath79_register_wmac(art + MAC1200R_WMAC_CALDATA_OFFSET, tmpmac);
++
++	ath79_init_mac(tmpmac, mac, 1);
++	ap91_pci_init(art + MAC1200R_PCIE_CALDATA_OFFSET, tmpmac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++
++	/* LAN */
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++
++	ath79_register_eth(1);
++
++	/* WAN */
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2);
++
++	/* GMAC0 is connected to the PHY4 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	ath79_register_eth(0);
++
++	ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN1,
++				 AR934X_GPIO_OUT_LED_LINK3);
++	ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN2,
++				 AR934X_GPIO_OUT_LED_LINK2);
++	ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN3,
++				 AR934X_GPIO_OUT_LED_LINK1);
++	ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN4,
++				 AR934X_GPIO_OUT_LED_LINK0);
++	ath79_gpio_output_select(MAC1200R_GPIO_LED_WAN,
++				 AR934X_GPIO_OUT_LED_LINK4);
++}
++
++MIPS_MACHINE(ATH79_MACH_MC_MAC1200R, "MC-MAC1200R",
++	     "MERCURY MAC1200R",
++	     mac1200r_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mr12.c linux-4.1.13/arch/mips/ath79/mach-mr12.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mr12.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mr12.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,115 @@
++/*
++ *  Cisco Meraki MR12 board support
++ *
++ *  Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com>
++ *
++ *  Based on Atheros AP96 board support configuration
++ *
++ *  Copyright (C) 2009 Marco Porsch
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2010 Atheros Communications
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++
++#define MR12_GPIO_LED_W4_GREEN		14
++#define MR12_GPIO_LED_W3_GREEN		13
++#define MR12_GPIO_LED_W2_GREEN		12
++#define MR12_GPIO_LED_W1_GREEN		11
++
++#define MR12_GPIO_LED_WAN		15
++
++#define MR12_GPIO_LED_POWER_ORANGE		16
++#define MR12_GPIO_LED_POWER_GREEN		17
++
++#define MR12_GPIO_BTN_RESET		8
++#define MR12_KEYS_POLL_INTERVAL		20	/* msecs */
++#define MR12_KEYS_DEBOUNCE_INTERVAL	(3 * MR12_KEYS_POLL_INTERVAL)
++
++#define MR12_WAN_PHYMASK    BIT(4)
++
++#define MR12_WMAC0_MAC_OFFSET           0x120c
++#define MR12_CALDATA0_OFFSET            0x1000
++
++static struct gpio_led MR12_leds_gpio[] __initdata = {
++	{
++		.name		= "mr12:green:wan",
++		.gpio		= MR12_GPIO_LED_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr12:orange:power",
++		.gpio		= MR12_GPIO_LED_POWER_ORANGE,
++		.active_low	= 1,
++	}, {
++		.name		= "mr12:green:power",
++		.gpio		= MR12_GPIO_LED_POWER_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr12:green:wifi4",
++		.gpio		= MR12_GPIO_LED_W4_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr12:green:wifi3",
++		.gpio		= MR12_GPIO_LED_W3_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr12:green:wifi2",
++		.gpio		= MR12_GPIO_LED_W2_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr12:green:wifi1",
++		.gpio		= MR12_GPIO_LED_W1_GREEN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button MR12_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MR12_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MR12_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static void __init MR12_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0xbfff0000);
++	
++	ath79_register_mdio(0,0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = MR12_WAN_PHYMASK;
++	ath79_register_eth(0);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(MR12_leds_gpio),
++					MR12_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, MR12_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(MR12_gpio_keys),
++					MR12_gpio_keys);
++
++	ap91_pci_init(mac + MR12_CALDATA0_OFFSET,
++				mac + MR12_WMAC0_MAC_OFFSET);
++
++}
++
++MIPS_MACHINE(ATH79_MACH_MR12, "MR12", "Meraki MR12", MR12_setup);
+\ No newline at end of file
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mr16.c linux-4.1.13/arch/mips/ath79/mach-mr16.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mr16.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mr16.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,118 @@
++/*
++ *  Cisco Meraki MR16 board support
++ *
++ *  Copyright (C) 2015 Chris Blake <chrisrblake93@gmail.com>
++ *
++ *  Based on Atheros AP96 board support configuration
++ *
++ *  Copyright (C) 2009 Marco Porsch
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2010 Atheros Communications
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++
++#define MR16_GPIO_LED_W4_GREEN		3
++#define MR16_GPIO_LED_W3_GREEN		2
++#define MR16_GPIO_LED_W2_GREEN		1
++#define MR16_GPIO_LED_W1_GREEN		0
++
++#define MR16_GPIO_LED_WAN		4
++
++#define MR16_GPIO_LED_POWER_ORANGE		5
++#define MR16_GPIO_LED_POWER_GREEN		6
++
++#define MR16_GPIO_BTN_RESET		7
++#define MR16_KEYS_POLL_INTERVAL		20	/* msecs */
++#define MR16_KEYS_DEBOUNCE_INTERVAL	(3 * MR16_KEYS_POLL_INTERVAL)
++
++#define MR16_WAN_PHYMASK    BIT(0)
++
++#define MR16_WMAC0_MAC_OFFSET		0x120c
++#define MR16_WMAC1_MAC_OFFSET		0x520c
++#define MR16_CALDATA0_OFFSET		0x1000
++#define MR16_CALDATA1_OFFSET		0x5000
++
++static struct gpio_led MR16_leds_gpio[] __initdata = {
++	{
++		.name		= "mr16:green:wan",
++		.gpio		= MR16_GPIO_LED_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr16:orange:power",
++		.gpio		= MR16_GPIO_LED_POWER_ORANGE,
++		.active_low	= 1,
++	}, {
++		.name		= "mr16:green:power",
++		.gpio		= MR16_GPIO_LED_POWER_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr16:green:wifi4",
++		.gpio		= MR16_GPIO_LED_W4_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr16:green:wifi3",
++		.gpio		= MR16_GPIO_LED_W3_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr16:green:wifi2",
++		.gpio		= MR16_GPIO_LED_W2_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "mr16:green:wifi1",
++		.gpio		= MR16_GPIO_LED_W1_GREEN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button MR16_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MR16_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MR16_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static void __init MR16_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0xbfff0000);
++	
++	ath79_register_mdio(0,0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = MR16_WAN_PHYMASK;
++	ath79_register_eth(0);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(MR16_leds_gpio),
++					MR16_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, MR16_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(MR16_gpio_keys),
++					MR16_gpio_keys);
++
++	ap94_pci_init(mac + MR16_CALDATA0_OFFSET,
++		    mac + MR16_WMAC0_MAC_OFFSET,
++		    mac + MR16_CALDATA1_OFFSET,
++		    mac + MR16_WMAC1_MAC_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_MR16, "MR16", "Meraki MR16", MR16_setup);
+\ No newline at end of file
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mr1750.c linux-4.1.13/arch/mips/ath79/mach-mr1750.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mr1750.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mr1750.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,129 @@
++/*
++ * MR1750 board support
++ *
++ * Copyright (c) 2012 Qualcomm Atheros
++ * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define MR1750_GPIO_LED_LAN		12
++#define MR1750_GPIO_LED_WLAN_2G		13
++#define MR1750_GPIO_LED_STATUS_GREEN	19
++#define MR1750_GPIO_LED_STATUS_RED	21
++#define MR1750_GPIO_LED_POWER		22
++#define MR1750_GPIO_LED_WLAN_5G		23
++
++#define MR1750_GPIO_BTN_RESET		17
++
++#define MR1750_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MR1750_KEYS_DEBOUNCE_INTERVAL	(3 * MR1750_KEYS_POLL_INTERVAL)
++
++#define MR1750_MAC0_OFFSET		0
++#define MR1750_WMAC_CALDATA_OFFSET	0x1000
++
++static struct gpio_led mr1750_leds_gpio[] __initdata = {
++	{
++		.name		= "mr1750:blue:power",
++		.gpio		= MR1750_GPIO_LED_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr1750:blue:wan",
++		.gpio		= MR1750_GPIO_LED_LAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr1750:blue:wlan24",
++		.gpio		= MR1750_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr1750:blue:wlan58",
++		.gpio		= MR1750_GPIO_LED_WLAN_5G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr1750:green:status",
++		.gpio		= MR1750_GPIO_LED_STATUS_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr1750:red:status",
++		.gpio		= MR1750_GPIO_LED_STATUS_RED,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button mr1750_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MR1750_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MR1750_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static void __init mr1750_setup(void)
++{
++	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
++	u8 mac[6];
++
++	ath79_eth0_pll_data.pll_1000 = 0xbe000101;
++	ath79_eth0_pll_data.pll_100 = 0x80000101;
++	ath79_eth0_pll_data.pll_10 = 0x80001313;
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(mr1750_leds_gpio),
++				 mr1750_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, MR1750_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mr1750_gpio_keys),
++					mr1750_gpio_keys);
++
++	ath79_init_mac(mac, art + MR1750_MAC0_OFFSET, 1);
++	ath79_register_wmac(art + MR1750_WMAC_CALDATA_OFFSET, mac);
++	ath79_register_pci();
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + MR1750_MAC0_OFFSET, 0);
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(5);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_MR1750, "MR1750", "OpenMesh MR1750", mr1750_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mr600.c linux-4.1.13/arch/mips/ath79/mach-mr600.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mr600.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mr600.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,177 @@
++/*
++ * OpenMesh OM2P board support
++ *
++ * Copyright (C) 2012 Marek Lindner <marek@open-mesh.com>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define MR600_GPIO_LED_WLAN58		12
++#define MR600_GPIO_LED_WPS			13
++#define MR600_GPIO_LED_POWER			14
++
++#define MR600V2_GPIO_LED_WLAN58_RED		12
++#define MR600V2_GPIO_LED_WPS			13
++#define MR600V2_GPIO_LED_POWER			14
++#define MR600V2_GPIO_LED_WLAN24_GREEN		18
++#define MR600V2_GPIO_LED_WLAN24_YELLOW		19
++#define MR600V2_GPIO_LED_WLAN24_RED		20
++#define MR600V2_GPIO_LED_WLAN58_GREEN		21
++#define MR600V2_GPIO_LED_WLAN58_YELLOW		22
++
++#define MR600_GPIO_BTN_RESET		17
++
++#define MR600_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MR600_KEYS_DEBOUNCE_INTERVAL (3 * MR600_KEYS_POLL_INTERVAL)
++
++#define MR600_MAC_OFFSET		0
++#define MR600_WMAC_CALDATA_OFFSET	0x1000
++#define MR600_PCIE_CALDATA_OFFSET	0x5000
++
++static struct gpio_led mr600_leds_gpio[] __initdata = {
++	{
++		.name		= "mr600:orange:power",
++		.gpio		= MR600_GPIO_LED_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr600:blue:wps",
++		.gpio		= MR600_GPIO_LED_WPS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr600:green:wlan58",
++		.gpio		= MR600_GPIO_LED_WLAN58,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_led mr600v2_leds_gpio[] __initdata = {
++	{
++		.name		= "mr600:blue:power",
++		.gpio		= MR600V2_GPIO_LED_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr600:blue:wps",
++		.gpio		= MR600V2_GPIO_LED_WPS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr600:red:wlan24",
++		.gpio		= MR600V2_GPIO_LED_WLAN24_RED,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr600:yellow:wlan24",
++		.gpio		= MR600V2_GPIO_LED_WLAN24_YELLOW,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr600:green:wlan24",
++		.gpio		= MR600V2_GPIO_LED_WLAN24_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr600:red:wlan58",
++		.gpio		= MR600V2_GPIO_LED_WLAN58_RED,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr600:yellow:wlan58",
++		.gpio		= MR600V2_GPIO_LED_WLAN58_YELLOW,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr600:green:wlan58",
++		.gpio		= MR600V2_GPIO_LED_WLAN58_GREEN,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button mr600_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MR600_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MR600_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static void __init mr600_base_setup(unsigned num_leds, struct gpio_led *leds)
++{
++	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
++	u8 mac[6];
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, num_leds, leds);
++	ath79_register_gpio_keys_polled(-1, MR600_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mr600_gpio_keys),
++					mr600_gpio_keys);
++
++	ath79_init_mac(mac, art + MR600_MAC_OFFSET, 1);
++	ath79_register_wmac(art + MR600_WMAC_CALDATA_OFFSET, mac);
++
++	ath79_init_mac(mac, art + MR600_MAC_OFFSET, 8);
++	ap91_pci_init(art + MR600_PCIE_CALDATA_OFFSET, mac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + MR600_MAC_OFFSET, 0);
++
++	/* GMAC0 is connected to an external PHY */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++}
++
++static void __init mr600_setup(void)
++{
++	mr600_base_setup(ARRAY_SIZE(mr600_leds_gpio), mr600_leds_gpio);
++	ap9x_pci_setup_wmac_led_pin(0, 0);
++}
++
++MIPS_MACHINE(ATH79_MACH_MR600, "MR600", "OpenMesh MR600", mr600_setup);
++
++static void __init mr600v2_setup(void)
++{
++	mr600_base_setup(ARRAY_SIZE(mr600v2_leds_gpio), mr600v2_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_MR600V2, "MR600v2", "OpenMesh MR600v2", mr600v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mr900.c linux-4.1.13/arch/mips/ath79/mach-mr900.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mr900.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mr900.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,140 @@
++/*
++ * MR900 board support
++ *
++ * Copyright (c) 2012 Qualcomm Atheros
++ * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++#include <linux/ath9k_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define MR900_GPIO_LED_LAN		12
++#define MR900_GPIO_LED_WLAN_2G		13
++#define MR900_GPIO_LED_STATUS_GREEN	19
++#define MR900_GPIO_LED_STATUS_RED	21
++#define MR900_GPIO_LED_POWER		22
++#define MR900_GPIO_LED_WLAN_5G		23
++
++#define MR900_GPIO_BTN_RESET		17
++
++#define MR900_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MR900_KEYS_DEBOUNCE_INTERVAL	(3 * MR900_KEYS_POLL_INTERVAL)
++
++#define MR900_MAC0_OFFSET		0
++#define MR900_WMAC_CALDATA_OFFSET	0x1000
++#define MR900_PCIE_CALDATA_OFFSET	0x5000
++
++static struct gpio_led mr900_leds_gpio[] __initdata = {
++	{
++		.name		= "mr900:blue:power",
++		.gpio		= MR900_GPIO_LED_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr900:blue:wan",
++		.gpio		= MR900_GPIO_LED_LAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr900:blue:wlan24",
++		.gpio		= MR900_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr900:blue:wlan58",
++		.gpio		= MR900_GPIO_LED_WLAN_5G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr900:green:status",
++		.gpio		= MR900_GPIO_LED_STATUS_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "mr900:red:status",
++		.gpio		= MR900_GPIO_LED_STATUS_RED,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button mr900_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MR900_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MR900_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static void __init mr900_setup(void)
++{
++	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
++	u8 mac[6], pcie_mac[6];
++	struct ath9k_platform_data *pdata;
++
++	ath79_eth0_pll_data.pll_1000 = 0xbe000101;
++	ath79_eth0_pll_data.pll_100 = 0x80000101;
++	ath79_eth0_pll_data.pll_10 = 0x80001313;
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(mr900_leds_gpio),
++				 mr900_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, MR900_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mr900_gpio_keys),
++					mr900_gpio_keys);
++
++	ath79_init_mac(mac, art + MR900_MAC0_OFFSET, 1);
++	ath79_register_wmac(art + MR900_WMAC_CALDATA_OFFSET, mac);
++	ath79_init_mac(pcie_mac, art + MR900_MAC0_OFFSET, 16);
++	ap91_pci_init(art + MR900_PCIE_CALDATA_OFFSET, pcie_mac);
++	pdata = ap9x_pci_get_wmac_data(0);
++	if (!pdata) {
++		pr_err("mr900: unable to get address of wlan data\n");
++		return;
++	}
++	pdata->use_eeprom = true;
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + MR900_MAC0_OFFSET, 0);
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(5);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_MR900, "MR900", "OpenMesh MR900", mr900_setup);
++MIPS_MACHINE(ATH79_MACH_MR900v2, "MR900v2", "OpenMesh MR900v2", mr900_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mynet-n600.c linux-4.1.13/arch/mips/ath79/mach-mynet-n600.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mynet-n600.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mynet-n600.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,202 @@
++/*
++ *  WD My Net N600 board support
++ *
++ *  Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define MYNET_N600_GPIO_LED_WIFI	0
++#define MYNET_N600_GPIO_LED_POWER	11
++#define MYNET_N600_GPIO_LED_INTERNET	12
++#define MYNET_N600_GPIO_LED_WPS		13
++
++#define MYNET_N600_GPIO_LED_LAN1	4
++#define MYNET_N600_GPIO_LED_LAN2	3
++#define MYNET_N600_GPIO_LED_LAN3	2
++#define MYNET_N600_GPIO_LED_LAN4	1
++
++#define MYNET_N600_GPIO_BTN_RESET	16
++#define MYNET_N600_GPIO_BTN_WPS		17
++
++#define MYNET_N600_GPIO_EXTERNAL_LNA0	14
++#define MYNET_N600_GPIO_EXTERNAL_LNA1	15
++
++#define MYNET_N600_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MYNET_N600_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N600_KEYS_POLL_INTERVAL)
++
++#define MYNET_N600_MAC0_OFFSET		0
++#define MYNET_N600_MAC1_OFFSET		6
++#define MYNET_N600_WMAC_CALDATA_OFFSET	0x1000
++#define MYNET_N600_PCIE_CALDATA_OFFSET	0x5000
++
++#define MYNET_N600_NVRAM_ADDR		0x1f058010
++#define MYNET_N600_NVRAM_SIZE		0x7ff0
++
++static struct gpio_led mynet_n600_leds_gpio[] __initdata = {
++	{
++		.name		= "wd:blue:power",
++		.gpio		= MYNET_N600_GPIO_LED_POWER,
++		.active_low	= 0,
++	},
++	{
++		.name		= "wd:blue:wps",
++		.gpio		= MYNET_N600_GPIO_LED_WPS,
++		.active_low	= 0,
++	},
++	{
++		.name		= "wd:blue:wireless",
++		.gpio		= MYNET_N600_GPIO_LED_WIFI,
++		.active_low	= 0,
++	},
++	{
++		.name		= "wd:blue:internet",
++		.gpio		= MYNET_N600_GPIO_LED_INTERNET,
++		.active_low	= 0,
++	},
++	{
++		.name		= "wd:green:lan1",
++		.gpio		= MYNET_N600_GPIO_LED_LAN1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wd:green:lan2",
++		.gpio		= MYNET_N600_GPIO_LED_LAN2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wd:green:lan3",
++		.gpio		= MYNET_N600_GPIO_LED_LAN3,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wd:green:lan4",
++		.gpio		= MYNET_N600_GPIO_LED_LAN4,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button mynet_n600_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MYNET_N600_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MYNET_N600_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++static void mynet_n600_get_mac(const char *name, char *mac)
++{
++	u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N600_NVRAM_ADDR);
++	int err;
++
++	err = ath79_nvram_parse_mac_addr(nvram, MYNET_N600_NVRAM_SIZE,
++					 name, mac);
++	if (err)
++		pr_err("no MAC address found for %s\n", name);
++}
++
++#define MYNET_N600_WAN_PHY_MASK	BIT(0)
++
++static void __init mynet_n600_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(NULL);
++
++	ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN1,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN2,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN3,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN4,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(MYNET_N600_GPIO_LED_INTERNET,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n600_leds_gpio),
++				 mynet_n600_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, MYNET_N600_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mynet_n600_gpio_keys),
++					mynet_n600_gpio_keys);
++
++	/*
++	 * Control signal for external LNAs 0 and 1
++	 * Taken from GPL bootloader source:
++	 *   board/ar7240/db12x/alpha_gpio.c
++	 */
++	ath79_wmac_set_ext_lna_gpio(0, MYNET_N600_GPIO_EXTERNAL_LNA0);
++	ath79_wmac_set_ext_lna_gpio(1, MYNET_N600_GPIO_EXTERNAL_LNA1);
++
++	mynet_n600_get_mac("wlan24mac=", tmpmac);
++	ath79_register_wmac(art + MYNET_N600_WMAC_CALDATA_OFFSET, tmpmac);
++
++	mynet_n600_get_mac("wlan5mac=", tmpmac);
++	ap91_pci_init(art + MYNET_N600_PCIE_CALDATA_OFFSET, tmpmac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE |
++				   AR934X_ETH_CFG_SW_PHY_SWAP);
++
++	ath79_register_mdio(1, 0x0);
++
++	/* LAN */
++	mynet_n600_get_mac("lanmac=", ath79_eth1_data.mac_addr);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++
++	ath79_register_eth(1);
++
++	/* WAN */
++	mynet_n600_get_mac("wanmac=", ath79_eth0_data.mac_addr);
++
++	/* GMAC0 is connected to the PHY4 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = MYNET_N600_WAN_PHY_MASK;
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = MYNET_N600_WAN_PHY_MASK;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	ath79_register_eth(0);
++
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_MYNET_N600, "MYNET-N600", "WD My Net N600",
++	     mynet_n600_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mynet-n750.c linux-4.1.13/arch/mips/ath79/mach-mynet-n750.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mynet-n750.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mynet-n750.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,226 @@
++/*
++ *  WD My Net N750 board support
++ *
++ *  Copyright (C) 2013 Felix Kaechele <felix@fetzig.org>
++ *  Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++
++/*
++ * Taken from GPL bootloader source:
++ *   board/ar7240/db12x/alpha_gpio.c
++ */
++#define MYNET_N750_GPIO_LED_WIFI	11
++#define MYNET_N750_GPIO_LED_INTERNET	12
++#define MYNET_N750_GPIO_LED_WPS		13
++#define MYNET_N750_GPIO_LED_POWER	14
++
++#define MYNET_N750_GPIO_BTN_RESET	17
++#define MYNET_N750_GPIO_BTN_WPS		19
++
++#define MYNET_N750_GPIO_EXTERNAL_LNA0	15
++#define MYNET_N750_GPIO_EXTERNAL_LNA1	18
++
++#define MYNET_N750_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MYNET_N750_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N750_KEYS_POLL_INTERVAL)
++
++#define MYNET_N750_WMAC_CALDATA_OFFSET	0x1000
++#define MYNET_N750_PCIE_CALDATA_OFFSET	0x5000
++
++#define MYNET_N750_NVRAM_ADDR		0x1f058010
++#define MYNET_N750_NVRAM_SIZE		0x7ff0
++
++static struct gpio_led mynet_n750_leds_gpio[] __initdata = {
++	{
++		.name		= "wd:blue:power",
++		.gpio		= MYNET_N750_GPIO_LED_POWER,
++		.active_low	= 0,
++	},
++	{
++		.name		= "wd:blue:wps",
++		.gpio		= MYNET_N750_GPIO_LED_WPS,
++		.active_low	= 0,
++	},
++	{
++		.name		= "wd:blue:wireless",
++		.gpio		= MYNET_N750_GPIO_LED_WIFI,
++		.active_low	= 0,
++	},
++	{
++		.name		= "wd:blue:internet",
++		.gpio		= MYNET_N750_GPIO_LED_INTERNET,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button mynet_n750_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MYNET_N750_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MYNET_N750_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++static const struct ar8327_led_info mynet_n750_leds_ar8327[] __initconst = {
++	AR8327_LED_INFO(PHY0_0, HW, "wd:green:lan1"),
++	AR8327_LED_INFO(PHY1_0, HW, "wd:green:lan2"),
++	AR8327_LED_INFO(PHY2_0, HW, "wd:green:lan3"),
++	AR8327_LED_INFO(PHY3_0, HW, "wd:green:lan4"),
++	AR8327_LED_INFO(PHY4_0, HW, "wd:green:wan"),
++	AR8327_LED_INFO(PHY0_1, HW, "wd:yellow:lan1"),
++	AR8327_LED_INFO(PHY1_1, HW, "wd:yellow:lan2"),
++	AR8327_LED_INFO(PHY2_1, HW, "wd:yellow:lan3"),
++	AR8327_LED_INFO(PHY3_1, HW, "wd:yellow:lan4"),
++	AR8327_LED_INFO(PHY4_1, HW, "wd:yellow:wan"),
++};
++
++static struct ar8327_pad_cfg mynet_n750_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_led_cfg mynet_n750_ar8327_led_cfg = {
++	.led_ctrl0 = 0xcc35cc35,
++	.led_ctrl1 = 0xca35ca35,
++	.led_ctrl2 = 0xc935c935,
++	.led_ctrl3 = 0x03ffff00,
++	.open_drain = false,
++};
++
++static struct ar8327_platform_data mynet_n750_ar8327_data = {
++	.pad0_cfg = &mynet_n750_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &mynet_n750_ar8327_led_cfg,
++	.num_leds = ARRAY_SIZE(mynet_n750_leds_ar8327),
++	.leds = mynet_n750_leds_ar8327,
++};
++
++static struct mdio_board_info mynet_n750_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &mynet_n750_ar8327_data,
++	},
++};
++
++static void mynet_n750_get_mac(const char *name, char *mac)
++{
++	u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N750_NVRAM_ADDR);
++	int err;
++
++	err = ath79_nvram_parse_mac_addr(nvram, MYNET_N750_NVRAM_SIZE,
++					 name, mac);
++	if (err)
++		pr_err("no MAC address found for %s\n", name);
++}
++
++/*
++ * The bootloader on this board powers down all PHYs on the switch
++ * before booting the kernel. We bring all PHYs back up so that they are
++ * discoverable by the mdio bus scan and the switch is detected
++ * correctly.
++ */
++static void mynet_n750_mdio_fixup(struct mii_bus *bus)
++{
++	int i;
++
++	for (i = 0; i < 5; i++)
++		bus->write(bus, i, MII_BMCR,
++			   (BMCR_RESET | BMCR_ANENABLE | BMCR_SPEED1000));
++
++	mdelay(1000);
++}
++
++static void __init mynet_n750_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n750_leds_gpio),
++				 mynet_n750_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, MYNET_N750_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mynet_n750_gpio_keys),
++					mynet_n750_gpio_keys);
++	/*
++	 * Control signal for external LNAs 0 and 1
++	 * Taken from GPL bootloader source:
++	 *   board/ar7240/db12x/alpha_gpio.c
++	 */
++	ath79_wmac_set_ext_lna_gpio(0, MYNET_N750_GPIO_EXTERNAL_LNA0);
++	ath79_wmac_set_ext_lna_gpio(1, MYNET_N750_GPIO_EXTERNAL_LNA1);
++
++	mynet_n750_get_mac("wlan24mac=", tmpmac);
++	ath79_register_wmac(art + MYNET_N750_WMAC_CALDATA_OFFSET, tmpmac);
++
++	mynet_n750_get_mac("wlan5mac=", tmpmac);
++	ap91_pci_init(art + MYNET_N750_PCIE_CALDATA_OFFSET, tmpmac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++
++	mdiobus_register_board_info(mynet_n750_mdio0_info,
++				    ARRAY_SIZE(mynet_n750_mdio0_info));
++
++	ath79_mdio0_data.reset = mynet_n750_mdio_fixup;
++	ath79_register_mdio(0, 0x0);
++
++	mynet_n750_get_mac("lanmac=", ath79_eth0_data.mac_addr);
++
++	/* GMAC0 is connected to an AR8327N switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_MYNET_N750, "MYNET-N750", "WD My Net N750",
++	     mynet_n750_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mynet-rext.c linux-4.1.13/arch/mips/ath79/mach-mynet-rext.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mynet-rext.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mynet-rext.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,208 @@
++/*
++ *  WD My Net WI-FI Range Extender (Codename:Starfish db12x) board support
++ *
++ *  Copyright (C) 2013 Christian Lamparter <chunkeey@googlemail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++#include <linux/platform_data/phy-at803x.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define MYNET_REXT_GPIO_LED_POWER	11
++#define MYNET_REXT_GPIO_LED_ETHERNET	12
++#define MYNET_REXT_GPIO_LED_WIFI	19
++
++#define MYNET_REXT_GPIO_LED_RF_QTY1	20
++#define MYNET_REXT_GPIO_LED_RF_QTY2	21
++#define MYNET_REXT_GPIO_LED_RF_QTY3	22
++
++#define MYNET_REXT_GPIO_BTN_RESET	13
++#define MYNET_REXT_GPIO_BTN_WPS		15
++#define MYNET_REXT_GPIO_SW_RF		14
++
++#define MYNET_REXT_GPIO_PHY_SWRST	16	/* disables Ethernet PHY */
++#define MYNET_REXT_GPIO_PHY_INT		17
++#define MYNET_REXT_GPIO_18		18
++
++#define MYNET_REXT_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MYNET_REXT_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_REXT_KEYS_POLL_INTERVAL)
++
++#define MYNET_REXT_WMAC_CALDATA_OFFSET	0x1000
++
++#define MYNET_REXT_NVRAM_ADDR		0x1f7e0010
++#define MYNET_REXT_NVRAM_SIZE		0xfff0
++
++#define MYNET_REXT_ART_ADDR		0x1f7f0000
++
++static const char *mynet_rext_part_probes[] = {
++	"cybertan",
++	NULL,
++};
++
++static struct flash_platform_data mynet_rext_flash_data = {
++	.type		= "s25fl064k",
++	.part_probes	= mynet_rext_part_probes,
++};
++
++static struct gpio_led mynet_rext_leds_gpio[] __initdata = {
++	{
++		.name		= "wd:blue:power",
++		.gpio		= MYNET_REXT_GPIO_LED_POWER,
++		.active_low	= 0,
++	},
++	{
++		.name		= "wd:blue:wireless",
++		.gpio		= MYNET_REXT_GPIO_LED_WIFI,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wd:blue:ethernet",
++		.gpio		= MYNET_REXT_GPIO_LED_ETHERNET,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wd:blue:quality1",
++		.gpio		= MYNET_REXT_GPIO_LED_RF_QTY1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wd:blue:quality2",
++		.gpio		= MYNET_REXT_GPIO_LED_RF_QTY2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wd:blue:quality3",
++		.gpio		= MYNET_REXT_GPIO_LED_RF_QTY3,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button mynet_rext_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MYNET_REXT_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MYNET_REXT_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc           = "RF Band switch",
++		.type           = EV_SW,
++		.code           = BTN_1,
++		.debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
++		.gpio           = MYNET_REXT_GPIO_SW_RF,
++	},
++};
++
++static struct at803x_platform_data mynet_rext_at803x_data = {
++	.disable_smarteee = 0,
++	.enable_rgmii_rx_delay = 1,
++	.enable_rgmii_tx_delay = 0,
++	.fixup_rgmii_tx_delay = 1,
++};
++
++static struct mdio_board_info mynet_rext_mdio0_info[] = {
++        {
++                .bus_id = "ag71xx-mdio.0",
++                .phy_addr = 4,
++                .platform_data = &mynet_rext_at803x_data,
++        },
++};
++
++static void mynet_rext_get_mac(const char *name, char *mac)
++{
++	u8 *nvram = (u8 *) KSEG1ADDR(MYNET_REXT_NVRAM_ADDR);
++	int err;
++
++	err = ath79_nvram_parse_mac_addr(nvram, MYNET_REXT_NVRAM_SIZE,
++					 name, mac);
++	if (err)
++		pr_err("no MAC address found for %s\n", name);
++}
++
++static void __init mynet_rext_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(MYNET_REXT_ART_ADDR);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(&mynet_rext_flash_data);
++
++	/* GPIO configuration from drivers/char/GPIO8.c */
++
++	ath79_gpio_output_select(MYNET_REXT_GPIO_LED_POWER,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(MYNET_REXT_GPIO_LED_WIFI,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY1,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY2,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY3,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(MYNET_REXT_GPIO_LED_ETHERNET,
++				 AR934X_GPIO_OUT_GPIO);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_rext_leds_gpio),
++				 mynet_rext_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, MYNET_REXT_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mynet_rext_gpio_keys),
++					mynet_rext_gpio_keys);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_RXD_DELAY |
++				   AR934X_ETH_CFG_RDV_DELAY);
++
++	ath79_register_mdio(0, 0x0);
++
++	mdiobus_register_board_info(mynet_rext_mdio0_info,
++				    ARRAY_SIZE(mynet_rext_mdio0_info));
++
++	/* LAN */
++	mynet_rext_get_mac("et0macaddr=", ath79_eth0_data.mac_addr);
++
++	/* GMAC0 is connected to an external PHY on Port 4 */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_pll_data.pll_10   = 0x00001313; /* athrs_mac.c */
++	ath79_eth0_pll_data.pll_1000 = 0x0e000000; /* athrs_mac.c */
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_register_eth(0);
++
++	/* WLAN */
++	mynet_rext_get_mac("wl0_hwaddr=", tmpmac);
++	ap91_pci_init(art + MYNET_REXT_WMAC_CALDATA_OFFSET, tmpmac);
++}
++
++MIPS_MACHINE(ATH79_MACH_MYNET_REXT, "MYNET-REXT",
++	     "WD My Net Wi-Fi Range Extender", mynet_rext_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mzk-w04nu.c linux-4.1.13/arch/mips/ath79/mach-mzk-w04nu.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mzk-w04nu.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mzk-w04nu.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,124 @@
++/*
++ *  Planex MZK-W04NU board support
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define MZK_W04NU_GPIO_LED_USB		0
++#define MZK_W04NU_GPIO_LED_STATUS	1
++#define MZK_W04NU_GPIO_LED_WPS		3
++#define MZK_W04NU_GPIO_LED_WLAN		6
++#define MZK_W04NU_GPIO_LED_AP		15
++#define MZK_W04NU_GPIO_LED_ROUTER	16
++
++#define MZK_W04NU_GPIO_BTN_APROUTER	5
++#define MZK_W04NU_GPIO_BTN_WPS		12
++#define MZK_W04NU_GPIO_BTN_RESET	21
++
++#define MZK_W04NU_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL)
++
++static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = {
++	{
++		.name		= "planex:green:status",
++		.gpio		= MZK_W04NU_GPIO_LED_STATUS,
++		.active_low	= 1,
++	}, {
++		.name		= "planex:blue:wps",
++		.gpio		= MZK_W04NU_GPIO_LED_WPS,
++		.active_low	= 1,
++	}, {
++		.name		= "planex:green:wlan",
++		.gpio		= MZK_W04NU_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}, {
++		.name		= "planex:green:usb",
++		.gpio		= MZK_W04NU_GPIO_LED_USB,
++		.active_low	= 1,
++	}, {
++		.name		= "planex:green:ap",
++		.gpio		= MZK_W04NU_GPIO_LED_AP,
++		.active_low	= 1,
++	}, {
++		.name		= "planex:green:router",
++		.gpio		= MZK_W04NU_GPIO_LED_ROUTER,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MZK_W04NU_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MZK_W04NU_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}, {
++		.desc		= "aprouter",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MZK_W04NU_GPIO_BTN_APROUTER,
++		.active_low	= 0,
++	}
++};
++
++#define MZK_W04NU_WAN_PHYMASK	BIT(4)
++#define MZK_W04NU_MDIO_MASK	(~MZK_W04NU_WAN_PHYMASK)
++
++static void __init mzk_w04nu_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_mdio(0, MZK_W04NU_MDIO_MASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.has_ar8216 = 1;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
++				 mzk_w04nu_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mzk_w04nu_gpio_keys),
++					mzk_w04nu_gpio_keys);
++	ath79_register_usb();
++
++	ath79_register_wmac(eeprom, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",
++	     mzk_w04nu_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-mzk-w300nh.c linux-4.1.13/arch/mips/ath79/mach-mzk-w300nh.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-mzk-w300nh.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-mzk-w300nh.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,115 @@
++/*
++ *  Planex MZK-W300NH board support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define MZK_W300NH_GPIO_LED_STATUS	1
++#define MZK_W300NH_GPIO_LED_WPS		3
++#define MZK_W300NH_GPIO_LED_WLAN	6
++#define MZK_W300NH_GPIO_LED_AP_GREEN	15
++#define MZK_W300NH_GPIO_LED_AP_AMBER	16
++
++#define MZK_W300NH_GPIO_BTN_APROUTER	5
++#define MZK_W300NH_GPIO_BTN_WPS		12
++#define MZK_W300NH_GPIO_BTN_RESET	21
++
++#define MZK_W300NH_KEYS_POLL_INTERVAL	20	/* msecs */
++#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL)
++
++static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
++	{
++		.name		= "planex:green:status",
++		.gpio		= MZK_W300NH_GPIO_LED_STATUS,
++		.active_low	= 1,
++	}, {
++		.name		= "planex:blue:wps",
++		.gpio		= MZK_W300NH_GPIO_LED_WPS,
++		.active_low	= 1,
++	}, {
++		.name		= "planex:green:wlan",
++		.gpio		= MZK_W300NH_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}, {
++		.name		= "planex:green:aprouter",
++		.gpio		= MZK_W300NH_GPIO_LED_AP_GREEN,
++	}, {
++		.name		= "planex:amber:aprouter",
++		.gpio		= MZK_W300NH_GPIO_LED_AP_AMBER,
++	}
++};
++
++static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MZK_W300NH_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MZK_W300NH_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}, {
++		.desc		= "aprouter",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= MZK_W300NH_GPIO_BTN_APROUTER,
++		.active_low	= 0,
++	}
++};
++
++#define MZK_W300NH_WAN_PHYMASK	BIT(4)
++#define MZK_W300NH_MDIO_MASK	(~MZK_W300NH_WAN_PHYMASK)
++
++static void __init mzk_w300nh_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_mdio(0, MZK_W300NH_MDIO_MASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.has_ar8216 = 1;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
++				 mzk_w300nh_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(mzk_w300nh_gpio_keys),
++					mzk_w300nh_gpio_keys);
++	ath79_register_wmac(eeprom, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
++	     mzk_w300nh_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-nbg460n.c linux-4.1.13/arch/mips/ath79/mach-nbg460n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-nbg460n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-nbg460n.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,220 @@
++/*
++ *  Zyxel NBG 460N/550N/550NH board support
++ *
++ *  Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com>
++ *
++ *  based on mach-tl-wr1043nd.c
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/delay.h>
++#include <linux/i2c.h>
++#include <linux/i2c-algo-bit.h>
++#include <linux/i2c-gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/rtl8366.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++/* LEDs */
++#define NBG460N_GPIO_LED_WPS		3
++#define NBG460N_GPIO_LED_WAN		6
++#define NBG460N_GPIO_LED_POWER		14
++#define NBG460N_GPIO_LED_WLAN		15
++
++/* Buttons */
++#define NBG460N_GPIO_BTN_WPS		12
++#define NBG460N_GPIO_BTN_RESET		21
++
++#define NBG460N_KEYS_POLL_INTERVAL	20	/* msecs */
++#define NBG460N_KEYS_DEBOUNCE_INTERVAL	(3 * NBG460N_KEYS_POLL_INTERVAL)
++
++/* RTC chip PCF8563 I2C interface */
++#define NBG460N_GPIO_PCF8563_SDA	8
++#define NBG460N_GPIO_PCF8563_SCK	7
++
++/* Switch configuration I2C interface */
++#define NBG460N_GPIO_RTL8366_SDA	16
++#define NBG460N_GPIO_RTL8366_SCK	18
++
++static struct mtd_partition nbg460n_partitions[] = {
++	{
++		.name		= "Bootbase",
++		.offset		= 0,
++		.size		= 0x010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "U-Boot Config",
++		.offset		= 0x010000,
++		.size		= 0x030000,
++	}, {
++		.name		= "U-Boot",
++		.offset		= 0x040000,
++		.size		= 0x030000,
++	}, {
++		.name		= "linux",
++		.offset		= 0x070000,
++		.size		= 0x0e0000,
++	}, {
++		.name		= "rootfs",
++		.offset		= 0x150000,
++		.size		= 0x2a0000,
++	}, {
++		.name		= "CalibData",
++		.offset		= 0x3f0000,
++		.size		= 0x010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "firmware",
++		.offset		= 0x070000,
++		.size		= 0x380000,
++	}
++};
++
++static struct flash_platform_data nbg460n_flash_data = {
++	.parts		= nbg460n_partitions,
++	.nr_parts       = ARRAY_SIZE(nbg460n_partitions),
++};
++
++static struct gpio_led nbg460n_leds_gpio[] __initdata = {
++	{
++		.name		= "nbg460n:green:power",
++		.gpio		= NBG460N_GPIO_LED_POWER,
++		.active_low	= 0,
++		.default_trigger = "default-on",
++	}, {
++		.name		= "nbg460n:green:wps",
++		.gpio		= NBG460N_GPIO_LED_WPS,
++		.active_low	= 0,
++	}, {
++		.name		= "nbg460n:green:wlan",
++		.gpio		= NBG460N_GPIO_LED_WLAN,
++		.active_low	= 0,
++	}, {
++		/* Not really for controlling the LED,
++		   when set low the LED blinks uncontrollable  */
++		.name		= "nbg460n:green:wan",
++		.gpio		= NBG460N_GPIO_LED_WAN,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG460N_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG460N_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = {
++	.sda_pin	= NBG460N_GPIO_PCF8563_SDA,
++	.scl_pin	= NBG460N_GPIO_PCF8563_SCK,
++	.udelay		= 10,
++};
++
++static struct platform_device nbg460n_i2c_device = {
++	.name		= "i2c-gpio",
++	.id		= -1,
++	.num_resources	= 0,
++	.resource	= NULL,
++	.dev		= {
++		.platform_data	= &nbg460n_i2c_device_platdata,
++	},
++};
++
++static struct i2c_board_info nbg460n_i2c_devs[] __initdata = {
++	{
++		I2C_BOARD_INFO("pcf8563", 0x51),
++	},
++};
++
++static void nbg460n_i2c_init(void)
++{
++	/* The gpio interface */
++	platform_device_register(&nbg460n_i2c_device);
++	/* I2C devices */
++	i2c_register_board_info(0, nbg460n_i2c_devs,
++				ARRAY_SIZE(nbg460n_i2c_devs));
++}
++
++
++static struct rtl8366_platform_data nbg460n_rtl8366s_data = {
++	.gpio_sda	= NBG460N_GPIO_RTL8366_SDA,
++	.gpio_sck	= NBG460N_GPIO_RTL8366_SCK,
++};
++
++static struct platform_device nbg460n_rtl8366s_device = {
++	.name		= RTL8366S_DRIVER_NAME,
++	.id		= -1,
++	.dev = {
++		.platform_data	= &nbg460n_rtl8366s_data,
++	}
++};
++
++static void __init nbg460n_setup(void)
++{
++	/* end of bootloader sector contains mac address */
++	u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8);
++	/* last sector contains wlan calib data */
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* LAN Port */
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	/* WAN Port */
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++	ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	/* register the switch phy */
++	platform_device_register(&nbg460n_rtl8366s_device);
++
++	/* register flash */
++	ath79_register_m25p80(&nbg460n_flash_data);
++
++	ath79_register_wmac(eeprom, mac);
++
++	/* register RTC chip */
++	nbg460n_i2c_init();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio),
++				 nbg460n_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(nbg460n_gpio_keys),
++					nbg460n_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH",
++	     nbg460n_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-nbg6716.c linux-4.1.13/arch/mips/ath79/mach-nbg6716.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-nbg6716.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-nbg6716.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,381 @@
++/*
++ * ZyXEL NBG6716/NBG6616 board support
++ *
++ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
++ * Copyright (c) 2012 Qualcomm Atheros
++ * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (c) 2013 Andre Valentin <avalentin@marcant.net>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++#include <linux/gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/platform/ar934x_nfc.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-nfc.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define NBG6716_GPIO_LED_INTERNET	18
++#define NBG6716_GPIO_LED_POWER		15
++#define NBG6716_GPIO_LED_USB1		4
++#define NBG6716_GPIO_LED_USB2		13
++#define NBG6716_GPIO_LED_WIFI2G		19
++#define NBG6716_GPIO_LED_WIFI5G		17
++#define NBG6716_GPIO_LED_WPS		21
++
++#define NBG6716_GPIO_BTN_RESET		23
++#define NBG6716_GPIO_BTN_RFKILL		1
++#define NBG6716_GPIO_BTN_USB1		0
++#define NBG6716_GPIO_BTN_USB2		14
++#define NBG6716_GPIO_BTN_WPS		22
++
++#define NBG6716_GPIO_USB_POWER		16
++
++#define NBG6716_KEYS_POLL_INTERVAL	20	/* msecs */
++#define NBG6716_KEYS_DEBOUNCE_INTERVAL	(3 * NBG6716_KEYS_POLL_INTERVAL)
++
++#define NBG6716_MAC0_OFFSET		0
++#define NBG6716_MAC1_OFFSET		6
++#define NBG6716_WMAC_CALDATA_OFFSET	0x1000
++#define NBG6716_PCIE_CALDATA_OFFSET	0x5000
++
++/* NBG6616 has a different GPIO usage as it does not have USB Buttons */
++#define NBG6616_GPIO_LED_USB0		14
++#define NBG6616_GPIO_LED_USB1		21
++#define NBG6616_GPIO_LED_WPS		0
++
++static struct gpio_led nbg6716_leds_gpio[] __initdata = {
++	{
++		.name		= "nbg6716:white:internet",
++		.gpio		= NBG6716_GPIO_LED_INTERNET,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6716:white:power",
++		.gpio		= NBG6716_GPIO_LED_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6716:white:usb1",
++		.gpio		= NBG6716_GPIO_LED_USB1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6716:white:usb2",
++		.gpio		= NBG6716_GPIO_LED_USB2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6716:white:wifi2g",
++		.gpio		= NBG6716_GPIO_LED_WIFI2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6716:white:wifi5g",
++		.gpio		= NBG6716_GPIO_LED_WIFI5G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6716:white:wps",
++		.gpio		= NBG6716_GPIO_LED_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button nbg6716_gpio_keys[] __initdata = {
++	{
++		.desc		= "RESET button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG6716_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "RFKILL button",
++		.type		= EV_SW,
++		.code		= KEY_RFKILL,
++		.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG6716_GPIO_BTN_RFKILL,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "USB1 eject button",
++		.type		= EV_KEY,
++		.code		= BTN_1,
++		.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG6716_GPIO_BTN_USB1,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "USB2 eject button",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG6716_GPIO_BTN_USB2,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG6716_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++
++
++static struct gpio_led nbg6616_leds_gpio[] __initdata = {
++	{
++		.name		= "nbg6616:green:power",
++		.gpio		= NBG6716_GPIO_LED_POWER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6616:green:usb2",
++		.gpio		= NBG6616_GPIO_LED_USB0,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6616:green:usb1",
++		.gpio		= NBG6616_GPIO_LED_USB1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6616:green:wifi2g",
++		.gpio		= NBG6716_GPIO_LED_WIFI2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6616:green:wifi5g",
++		.gpio		= NBG6716_GPIO_LED_WIFI5G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "nbg6616:green:wps",
++		.gpio		= NBG6616_GPIO_LED_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button nbg6616_gpio_keys[] __initdata = {
++	{
++		.desc		= "RESET button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG6716_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "RFKILL button",
++		.type		= EV_KEY,
++		.code		= KEY_RFKILL,
++		.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG6716_GPIO_BTN_RFKILL,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= NBG6716_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++
++static struct ar8327_pad_cfg nbg6716_ar8327_pad0_cfg;
++static struct ar8327_pad_cfg nbg6716_ar8327_pad6_cfg;
++static struct ar8327_led_cfg nbg6716_ar8327_led_cfg;
++
++static struct ar8327_platform_data nbg6716_ar8327_data = {
++	.pad0_cfg = &nbg6716_ar8327_pad0_cfg,
++	.pad6_cfg = &nbg6716_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &nbg6716_ar8327_led_cfg
++};
++
++static struct mdio_board_info nbg6716_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &nbg6716_ar8327_data,
++	},
++};
++
++static void nbg6716_get_mac(void* nvram_addr, const char *name, char *mac)
++{
++	u8 *nvram = (u8 *) KSEG1ADDR(nvram_addr);
++	int err;
++
++	err = ath79_nvram_parse_mac_addr(nvram, 0x10000,
++					 name, mac);
++	if (err)
++		pr_err("no MAC address found for %s\n", name);
++}
++
++static void __init nbg6716_common_setup(u32 leds_num, struct gpio_led* leds,
++					u32 keys_num,
++					struct gpio_keys_button* keys,
++					void* art_addr, void* nvram)
++{
++	u8 *art = (u8 *) KSEG1ADDR(art_addr);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, leds_num, leds);
++	ath79_register_gpio_keys_polled(-1, NBG6716_KEYS_POLL_INTERVAL,
++					keys_num, keys);
++
++	ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
++	ath79_register_nfc();
++
++	gpio_request_one(NBG6716_GPIO_USB_POWER,
++		GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++		"USB power");
++
++	ath79_register_usb();
++
++	nbg6716_get_mac(nvram, "ethaddr=", tmpmac);
++
++	ath79_register_pci();
++
++	ath79_register_wmac(art + NBG6716_WMAC_CALDATA_OFFSET, tmpmac);
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, tmpmac, 2);
++	ath79_init_mac(ath79_eth1_data.mac_addr, tmpmac, 3);
++
++	mdiobus_register_board_info(nbg6716_mdio0_info,
++				    ARRAY_SIZE(nbg6716_mdio0_info));
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(1);
++}
++
++static void __init nbg6716_010_setup(void)
++{
++	/* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
++	nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
++	nbg6716_ar8327_pad0_cfg.txclk_delay_en = true;
++	nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true;
++	nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++	nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++	nbg6716_ar8327_pad0_cfg.mac06_exchange_en = true;
++
++	/* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
++	nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
++	nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true;
++	nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
++
++	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	nbg6716_ar8327_led_cfg.open_drain = 0;
++	nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7;
++	nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7;
++	nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7;
++	nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00;
++
++	nbg6716_common_setup(ARRAY_SIZE(nbg6716_leds_gpio), nbg6716_leds_gpio,
++			     ARRAY_SIZE(nbg6716_gpio_keys), nbg6716_gpio_keys,
++			     (void*) 0x1f050000, (void*) 0x1f040000);
++}
++
++static void __init nbg6616_010_setup(void)
++{
++	/* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
++	nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
++	nbg6716_ar8327_pad0_cfg.txclk_delay_en = true;
++	nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true;
++	nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++	nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++
++	/* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
++	nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
++	nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true;
++	nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
++
++	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	nbg6716_ar8327_led_cfg.open_drain = 0;
++	nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7;
++	nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7;
++	nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7;
++	nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00;
++
++
++	nbg6716_common_setup(ARRAY_SIZE(nbg6616_leds_gpio), nbg6616_leds_gpio,
++			     ARRAY_SIZE(nbg6616_gpio_keys), nbg6616_gpio_keys,
++			     (void*) 0x1f040000, (void*) 0x1f030000);
++}
++
++
++MIPS_MACHINE(ATH79_MACH_NBG6716, "NBG6716",
++	     "Zyxel NBG6716",
++	     nbg6716_010_setup);
++
++MIPS_MACHINE(ATH79_MACH_NBG6616, "NBG6616",
++	     "Zyxel NBG6616",
++	     nbg6616_010_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-om2p.c linux-4.1.13/arch/mips/ath79/mach-om2p.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-om2p.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-om2p.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,225 @@
++/*
++ *  OpenMesh OM2P support
++ *
++ *  Copyright (C) 2011 Marek Lindner <marek@open-mesh.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define OM2P_GPIO_LED_POWER	0
++#define OM2P_GPIO_LED_GREEN	13
++#define OM2P_GPIO_LED_RED	14
++#define OM2P_GPIO_LED_YELLOW	15
++#define OM2P_GPIO_LED_LAN	16
++#define OM2P_GPIO_LED_WAN	17
++#define OM2P_GPIO_BTN_RESET	1
++
++#define OM2P_KEYS_POLL_INTERVAL		20	/* msecs */
++#define OM2P_KEYS_DEBOUNCE_INTERVAL	(3 * OM2P_KEYS_POLL_INTERVAL)
++
++#define OM2P_WAN_PHYMASK	BIT(4)
++
++#define OM2P_LC_GPIO_LED_POWER	1
++#define OM2P_LC_GPIO_LED_GREEN	15
++#define OM2P_LC_GPIO_LED_RED	16
++#define OM2P_LC_GPIO_LED_YELLOW	0
++#define OM2P_LC_GPIO_LED_LAN	13
++#define OM2P_LC_GPIO_LED_WAN	17
++#define OM2P_LC_GPIO_BTN_RESET	12
++
++static struct flash_platform_data om2p_flash_data = {
++	.type = "s25sl12800",
++	.name = "ar7240-nor0",
++};
++
++static struct gpio_led om2p_leds_gpio[] __initdata = {
++	{
++		.name		= "om2p:blue:power",
++		.gpio		= OM2P_GPIO_LED_POWER,
++		.active_low	= 1,
++	}, {
++		.name		= "om2p:red:wifi",
++		.gpio		= OM2P_GPIO_LED_RED,
++		.active_low	= 1,
++	}, {
++		.name		= "om2p:yellow:wifi",
++		.gpio		= OM2P_GPIO_LED_YELLOW,
++		.active_low	= 1,
++	}, {
++		.name		= "om2p:green:wifi",
++		.gpio		= OM2P_GPIO_LED_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "om2p:blue:lan",
++		.gpio		= OM2P_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "om2p:blue:wan",
++		.gpio		= OM2P_GPIO_LED_WAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button om2p_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= OM2P_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static void __init om2p_setup(void)
++{
++	u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
++	u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
++	u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000);
++
++	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_register_m25p80(&om2p_flash_data);
++
++	ath79_register_mdio(0, ~OM2P_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
++				 om2p_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(om2p_gpio_keys),
++					om2p_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup);
++
++
++static struct flash_platform_data om2p_lc_flash_data = {
++	.type = "s25sl12800",
++};
++
++static void __init om2p_lc_setup(void)
++{
++	u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
++	u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
++	u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000);
++	u32 t;
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
++	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
++
++	ath79_register_m25p80(&om2p_lc_flash_data);
++
++	om2p_leds_gpio[0].gpio = OM2P_LC_GPIO_LED_POWER;
++	om2p_leds_gpio[1].gpio = OM2P_LC_GPIO_LED_RED;
++	om2p_leds_gpio[2].gpio = OM2P_LC_GPIO_LED_YELLOW;
++	om2p_leds_gpio[3].gpio = OM2P_LC_GPIO_LED_GREEN;
++	om2p_leds_gpio[4].gpio = OM2P_LC_GPIO_LED_LAN;
++	om2p_leds_gpio[5].gpio = OM2P_LC_GPIO_LED_WAN;
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
++				 om2p_leds_gpio);
++
++	om2p_gpio_keys[0].gpio = OM2P_LC_GPIO_BTN_RESET;
++	ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(om2p_gpio_keys),
++					om2p_gpio_keys);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(art, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_OM2P_LC, "OM2P-LC", "OpenMesh OM2P LC", om2p_lc_setup);
++MIPS_MACHINE(ATH79_MACH_OM2Pv2, "OM2Pv2", "OpenMesh OM2Pv2", om2p_lc_setup);
++
++static void __init om2p_hs_setup(void)
++{
++	u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
++	u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
++	u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000);
++
++	/* make lan / wan leds software controllable */
++	ath79_gpio_output_select(OM2P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(OM2P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
++
++	/* enable reset button */
++	ath79_gpio_output_select(OM2P_GPIO_BTN_RESET, AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
++
++	om2p_leds_gpio[4].gpio = OM2P_GPIO_LED_WAN;
++	om2p_leds_gpio[5].gpio = OM2P_GPIO_LED_LAN;
++
++	ath79_register_m25p80(&om2p_lc_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
++				 om2p_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(om2p_gpio_keys),
++					om2p_gpio_keys);
++
++	ath79_register_wmac(art, NULL);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++
++	/* GMAC0 is connected to the PHY0 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_OM2P_HS, "OM2P-HS", "OpenMesh OM2P HS", om2p_hs_setup);
++MIPS_MACHINE(ATH79_MACH_OM2P_HSv2, "OM2P-HSv2", "OpenMesh OM2P HSv2", om2p_hs_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-om5p.c linux-4.1.13/arch/mips/ath79/mach-om5p.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-om5p.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-om5p.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,218 @@
++/*
++ *  OpenMesh OM5P support
++ *
++ *  Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
++ *  Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/i2c.h>
++#include <linux/i2c-algo-bit.h>
++#include <linux/i2c-gpio.h>
++#include <linux/platform_data/phy-at803x.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define OM5P_GPIO_LED_POWER	13
++#define OM5P_GPIO_LED_GREEN	16
++#define OM5P_GPIO_LED_RED	19
++#define OM5P_GPIO_LED_YELLOW	17
++#define OM5P_GPIO_LED_LAN	14
++#define OM5P_GPIO_LED_WAN	15
++#define OM5P_GPIO_BTN_RESET	4
++#define OM5P_GPIO_I2C_SCL	20
++#define OM5P_GPIO_I2C_SDA	21
++
++#define OM5P_KEYS_POLL_INTERVAL		20	/* msecs */
++#define OM5P_KEYS_DEBOUNCE_INTERVAL	(3 * OM5P_KEYS_POLL_INTERVAL)
++
++#define OM5P_WMAC_CALDATA_OFFSET	0x1000
++#define OM5P_PCI_CALDATA_OFFSET		0x5000
++
++static struct gpio_led om5p_leds_gpio[] __initdata = {
++	{
++		.name		= "om5p:blue:power",
++		.gpio		= OM5P_GPIO_LED_POWER,
++		.active_low	= 1,
++	}, {
++		.name		= "om5p:red:wifi",
++		.gpio		= OM5P_GPIO_LED_RED,
++		.active_low	= 1,
++	}, {
++		.name		= "om5p:yellow:wifi",
++		.gpio		= OM5P_GPIO_LED_YELLOW,
++		.active_low	= 1,
++	}, {
++		.name		= "om5p:green:wifi",
++		.gpio		= OM5P_GPIO_LED_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "om5p:blue:lan",
++		.gpio		= OM5P_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "om5p:blue:wan",
++		.gpio		= OM5P_GPIO_LED_WAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button om5p_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = OM5P_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= OM5P_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static struct flash_platform_data om5p_flash_data = {
++	.type = "mx25l12805d",
++};
++
++static void __init om5p_setup(void)
++{
++	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
++	u8 mac[6];
++
++	/* make lan / wan leds software controllable */
++	ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
++
++	ath79_register_m25p80(&om5p_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
++				 om5p_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, OM5P_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(om5p_gpio_keys),
++					om5p_gpio_keys);
++
++	ath79_init_mac(mac, art, 2);
++	ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
++
++	/* GMAC0 is connected to the PHY0 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_OM5P, "OM5P", "OpenMesh OM5P", om5p_setup);
++
++static struct i2c_gpio_platform_data om5pan_i2c_device_platdata = {
++	.sda_pin		= OM5P_GPIO_I2C_SDA,
++	.scl_pin		= OM5P_GPIO_I2C_SCL,
++	.udelay			= 10,
++	.sda_is_open_drain	= 1,
++	.scl_is_open_drain	= 1,
++};
++
++static struct platform_device om5pan_i2c_device = {
++	.name		= "i2c-gpio",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &om5pan_i2c_device_platdata,
++	},
++};
++
++static struct i2c_board_info om5pan_i2c_devs[] __initdata = {
++	{
++		I2C_BOARD_INFO("tmp423", 0x4c),
++	},
++};
++
++static struct at803x_platform_data om5p_an_at803x_data = {
++	.disable_smarteee = 1,
++	.enable_rgmii_rx_delay = 1,
++	.enable_rgmii_tx_delay = 1,
++};
++
++static struct mdio_board_info om5p_an_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 7,
++		.platform_data = &om5p_an_at803x_data,
++	},
++};
++
++static void __init om5p_an_setup(void)
++{
++	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
++	u8 mac[6];
++
++	/* temperature sensor */
++	platform_device_register(&om5pan_i2c_device);
++	i2c_register_board_info(0, om5pan_i2c_devs,
++				ARRAY_SIZE(om5pan_i2c_devs));
++
++	/* make lan / wan leds software controllable */
++	ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
++	ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
++
++	ath79_register_m25p80(&om5p_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
++				 om5p_leds_gpio);
++
++	ath79_init_mac(mac, art, 0x02);
++	ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++	ath79_setup_ar934x_eth_rx_delay(2, 2);
++	ath79_register_mdio(0, 0x0);
++	ath79_register_mdio(1, 0x0);
++
++	mdiobus_register_board_info(om5p_an_mdio0_info,
++				    ARRAY_SIZE(om5p_an_mdio0_info));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
++
++	/* GMAC0 is connected to the PHY7 */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_data.phy_mask = BIT(7);
++	ath79_eth0_pll_data.pll_1000 = 0x02000000;
++	ath79_eth0_pll_data.pll_100 = 0x00000101;
++	ath79_eth0_pll_data.pll_10 = 0x00001313;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(1);
++
++	ath79_init_mac(mac, art, 0x10);
++	ap91_pci_init(art + OM5P_PCI_CALDATA_OFFSET, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_OM5P_AN, "OM5P-AN", "OpenMesh OM5P AN", om5p_an_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-onion-omega.c linux-4.1.13/arch/mips/ath79/mach-onion-omega.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-onion-omega.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-onion-omega.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,84 @@
++/*
++ *  Onion Omega board support
++ *
++ *  Copyright (C) 2015 Boken Lin <bl@onion.io>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define OMEGA_GPIO_LED_SYSTEM	27
++#define OMEGA_GPIO_BTN_RESET	11
++
++#define OMEGA_GPIO_USB_POWER	8
++
++#define OMEGA_KEYS_POLL_INTERVAL	20  /* msecs */
++#define OMEGA_KEYS_DEBOUNCE_INTERVAL	(3 * OMEGA_KEYS_POLL_INTERVAL)
++
++static const char *omega_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data omega_flash_data = {
++	.part_probes    = omega_part_probes,
++};
++
++static struct gpio_led omega_leds_gpio[] __initdata = {
++	{
++		.name       = "onion:amber:system",
++		.gpio       = OMEGA_GPIO_LED_SYSTEM,
++		.active_low = 1,
++	},
++};
++
++static struct gpio_keys_button omega_gpio_keys[] __initdata = {
++	{
++		.desc       = "reset",
++		.type       = EV_KEY,
++		.code       = KEY_RESTART,
++		.debounce_interval = OMEGA_KEYS_DEBOUNCE_INTERVAL,
++		.gpio       = OMEGA_GPIO_BTN_RESET,
++		.active_low = 0,
++	}
++};
++
++static void __init onion_omega_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(&omega_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(omega_leds_gpio),
++				omega_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, OMEGA_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(omega_gpio_keys),
++					omega_gpio_keys);
++
++	gpio_request_one(OMEGA_GPIO_USB_POWER,
++			GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			"USB power");
++	ath79_register_usb();
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_ONION_OMEGA, "ONION-OMEGA", "Onion Omega", onion_omega_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-pb42.c linux-4.1.13/arch/mips/ath79/mach-pb42.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-pb42.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-pb42.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,83 @@
++/*
++ *  Atheros PB42 board support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define PB42_KEYS_POLL_INTERVAL		20	/* msecs */
++#define PB42_KEYS_DEBOUNCE_INTERVAL	(3 * PB42_KEYS_POLL_INTERVAL)
++
++#define PB42_GPIO_BTN_SW4	8
++#define PB42_GPIO_BTN_SW5	3
++
++static struct gpio_keys_button pb42_gpio_keys[] __initdata = {
++	{
++		.desc		= "sw4",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= PB42_GPIO_BTN_SW4,
++		.active_low	= 1,
++	}, {
++		.desc		= "sw5",
++		.type		= EV_KEY,
++		.code		= BTN_1,
++		.debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= PB42_GPIO_BTN_SW5,
++		.active_low	= 1,
++	}
++};
++
++static const char *pb42_part_probes[] = {
++	"RedBoot",
++	NULL,
++};
++
++static struct flash_platform_data pb42_flash_data = {
++	.part_probes	= pb42_part_probes,
++};
++
++#define PB42_WAN_PHYMASK	BIT(20)
++#define PB42_LAN_PHYMASK	(BIT(16) | BIT(17) | BIT(18) | BIT(19))
++#define PB42_MDIO_PHYMASK	(PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
++
++static void __init pb42_init(void)
++{
++	ath79_register_m25p80(&pb42_flash_data);
++
++	ath79_register_mdio(0, ~PB42_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.speed = SPEED_100;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(pb42_gpio_keys),
++					pb42_gpio_keys);
++
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-pb44.c linux-4.1.13/arch/mips/ath79/mach-pb44.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-pb44.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-pb44.c	2015-12-04 19:57:04.334081334 +0100
+@@ -8,23 +8,48 @@
+  *  by the Free Software Foundation.
+  */
+ 
++#include <linux/delay.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
+ #include <linux/i2c/pcf857x.h>
++#include <linux/i2c/pcf857x.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/vsc7385.h>
+ 
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "machtypes.h"
+ #include "pci.h"
+ 
+ #define PB44_GPIO_I2C_SCL	0
+ #define PB44_GPIO_I2C_SDA	1
+ 
++#define PB44_PCF8757_VSC7395_CS	0
++#define PB44_PCF8757_STEREO_CS	1
++#define PB44_PCF8757_SLIC_CS0	2
++#define PB44_PCF8757_SLIC_TEST	3
++#define PB44_PCF8757_SLIC_INT0	4
++#define PB44_PCF8757_SLIC_INT1	5
++#define PB44_PCF8757_SW_RESET	6
++#define PB44_PCF8757_SW_JUMP	8
++#define PB44_PCF8757_LED_JUMP1	9
++#define PB44_PCF8757_LED_JUMP2	10
++#define PB44_PCF8757_TP24	11
++#define PB44_PCF8757_TP25	12
++#define PB44_PCF8757_TP26	13
++#define PB44_PCF8757_TP27	14
++#define PB44_PCF8757_TP28	15
++
+ #define PB44_GPIO_EXP_BASE	16
++#define PB44_GPIO_VSC7395_CS	(PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+ #define PB44_GPIO_SW_RESET	(PB44_GPIO_EXP_BASE + 6)
+ #define PB44_GPIO_SW_JUMP	(PB44_GPIO_EXP_BASE + 8)
+ #define PB44_GPIO_LED_JUMP1	(PB44_GPIO_EXP_BASE + 9)
+@@ -87,20 +112,71 @@
+ 	}
+ };
+ 
++static struct ath79_spi_controller_data pb44_spi0_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++};
++
++static struct ath79_spi_controller_data pb44_spi1_data = {
++	.cs_type = ATH79_SPI_CS_TYPE_GPIO,
++	.cs_line = PB44_GPIO_VSC7395_CS,
++};
++
++static void pb44_vsc7395_reset(void)
++{
++	ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++	udelay(10);
++	ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++	mdelay(50);
++}
++
++static struct vsc7385_platform_data pb44_vsc7395_data = {
++	.reset		= pb44_vsc7395_reset,
++	.ucode_name	= "vsc7395_ucode_pb44.bin",
++	.mac_cfg = {
++		.tx_ipg		= 6,
++		.bit2		= 1,
++		.clk_sel	= 0,
++	},
++};
++
++static const char *pb44_part_probes[] = {
++	"RedBoot",
++	NULL,
++};
++
++static struct flash_platform_data pb44_flash_data = {
++	.part_probes	= pb44_part_probes,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+ 	{
+ 		.bus_num	= 0,
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 25000000,
+ 		.modalias	= "m25p64",
++		.platform_data	= &pb44_flash_data,
++		.controller_data = &pb44_spi0_data,
+ 	},
++	{
++		.bus_num	= 0,
++		.chip_select	= 1,
++		.max_speed_hz	= 25000000,
++		.modalias	= "spi-vsc7385",
++		.platform_data	= &pb44_vsc7395_data,
++		.controller_data = &pb44_spi1_data,
++	}
+ };
+ 
+ static struct ath79_spi_platform_data pb44_spi_data = {
+ 	.bus_num		= 0,
+-	.num_chipselect		= 1,
++	.num_chipselect		= 2,
+ };
+ 
++#define PB44_WAN_PHYMASK	BIT(0)
++#define PB44_LAN_PHYMASK	0
++#define PB44_MDIO_PHYMASK	(PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
++
+ static void __init pb44_init(void)
+ {
+ 	i2c_register_board_info(0, pb44_i2c_board_info,
+@@ -116,6 +192,22 @@
+ 			   ARRAY_SIZE(pb44_spi_info));
+ 	ath79_register_usb();
+ 	ath79_register_pci();
++
++	ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
++
++	ath79_register_eth(0);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++	ath79_register_eth(1);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-pb92.c linux-4.1.13/arch/mips/ath79/mach-pb92.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-pb92.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-pb92.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,70 @@
++/*
++ *  Atheros PB92 board support
++ *
++ *  Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define PB92_KEYS_POLL_INTERVAL		20	/* msecs */
++#define PB92_KEYS_DEBOUNCE_INTERVAL	(3 * PB92_KEYS_POLL_INTERVAL)
++
++#define PB92_GPIO_BTN_SW4	8
++#define PB92_GPIO_BTN_SW5	3
++
++static struct gpio_keys_button pb92_gpio_keys[] __initdata = {
++	{
++		.desc		= "sw4",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= PB92_GPIO_BTN_SW4,
++		.active_low	= 1,
++	}, {
++		.desc		= "sw5",
++		.type		= EV_KEY,
++		.code		= BTN_1,
++		.debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= PB92_GPIO_BTN_SW5,
++		.active_low	= 1,
++	}
++};
++
++static void __init pb92_init(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~BIT(0));
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_mask = BIT(0);
++
++	ath79_register_eth(0);
++
++	ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(pb92_gpio_keys),
++					 pb92_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-qihoo-c301.c linux-4.1.13/arch/mips/ath79/mach-qihoo-c301.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-qihoo-c301.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-qihoo-c301.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,166 @@
++/*
++ *  Qihoo 360 C301 board support
++ *
++ *  Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2014 Weijie Gao <hackpascal@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define QIHOO_C301_GPIO_LED_STATUS_GREEN	0
++#define QIHOO_C301_GPIO_LED_STATUS_RED		11
++
++#define QIHOO_C301_GPIO_LED_WAN			1
++#define QIHOO_C301_GPIO_LED_LAN1		2
++#define QIHOO_C301_GPIO_LED_LAN2		3
++#define QIHOO_C301_GPIO_ETH_LEN_EN		18
++
++#define QIHOO_C301_GPIO_BTN_RESET		16
++
++#define QIHOO_C301_GPIO_USB_POWER		19
++
++#define QIHOO_C301_GPIO_SPI_CS1			12
++
++#define QIHOO_C301_GPIO_EXTERNAL_LNA0		14
++#define QIHOO_C301_GPIO_EXTERNAL_LNA1		15
++
++#define QIHOO_C301_KEYS_POLL_INTERVAL		20	/* msecs */
++#define QIHOO_C301_KEYS_DEBOUNCE_INTERVAL	\
++	(3 * QIHOO_C301_KEYS_POLL_INTERVAL)
++
++#define QIHOO_C301_WMAC_CALDATA_OFFSET		0x1000
++
++#define QIHOO_C301_NVRAM_ADDR			0x1f058010
++#define QIHOO_C301_NVRAM_SIZE			0x7ff0
++
++static struct gpio_led qihoo_c301_leds_gpio[] __initdata = {
++	{
++		.name		= "qihoo:green:status",
++		.gpio		= QIHOO_C301_GPIO_LED_STATUS_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "qihoo:red:status",
++		.gpio		= QIHOO_C301_GPIO_LED_STATUS_RED,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button qihoo_c301_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = QIHOO_C301_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= QIHOO_C301_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static struct flash_platform_data flash __initdata = {NULL, NULL, 0};
++
++static void qihoo_c301_get_mac(const char *name, char *mac)
++{
++	u8 *nvram = (u8 *) KSEG1ADDR(QIHOO_C301_NVRAM_ADDR);
++	int err;
++
++	err = ath79_nvram_parse_mac_addr(nvram, QIHOO_C301_NVRAM_SIZE,
++					 name, mac);
++	if (err)
++		pr_err("no MAC address found for %s\n", name);
++}
++
++static void __init qihoo_c301_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80_multi(&flash);
++
++	ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
++
++	ath79_gpio_output_select(QIHOO_C301_GPIO_LED_WAN,
++				 AR934X_GPIO_OUT_LED_LINK4);
++	ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN1,
++				 AR934X_GPIO_OUT_LED_LINK1);
++	ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN2,
++				 AR934X_GPIO_OUT_LED_LINK2);
++
++	ath79_gpio_output_select(QIHOO_C301_GPIO_SPI_CS1,
++				 AR934X_GPIO_OUT_SPI_CS1);
++
++	gpio_request_one(QIHOO_C301_GPIO_ETH_LEN_EN,
++			 GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
++			 "Ethernet LED enable");
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(qihoo_c301_leds_gpio),
++				 qihoo_c301_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, QIHOO_C301_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(qihoo_c301_gpio_keys),
++					qihoo_c301_gpio_keys);
++
++	ath79_wmac_set_ext_lna_gpio(0, QIHOO_C301_GPIO_EXTERNAL_LNA0);
++	ath79_wmac_set_ext_lna_gpio(1, QIHOO_C301_GPIO_EXTERNAL_LNA1);
++
++	qihoo_c301_get_mac("wlan24mac=", tmpmac);
++	ath79_register_wmac(art + QIHOO_C301_WMAC_CALDATA_OFFSET, tmpmac);
++
++	ath79_register_pci();
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE |
++				   AR934X_ETH_CFG_SW_PHY_SWAP);
++
++	ath79_register_mdio(1, 0x0);
++
++	/* LAN */
++	qihoo_c301_get_mac("lanmac=", ath79_eth1_data.mac_addr);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++
++	ath79_register_eth(1);
++
++	/* WAN */
++	qihoo_c301_get_mac("wanmac=", ath79_eth0_data.mac_addr);
++
++	/* GMAC0 is connected to the PHY4 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	ath79_register_eth(0);
++
++	gpio_request_one(QIHOO_C301_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_QIHOO_C301, "QIHOO-C301", "Qihoo 360 C301",
++	     qihoo_c301_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-r6100.c linux-4.1.13/arch/mips/ath79/mach-r6100.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-r6100.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-r6100.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,146 @@
++/*
++ *  NETGEAR R6100 board support
++ *
++ *  Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/platform/ar934x_nfc.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-nfc.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define R6100_GPIO_LED_WLAN		0
++#define R6100_GPIO_LED_USB		11
++#define R6100_GPIO_LED_WAN_GREEN	13
++#define R6100_GPIO_LED_POWER_AMBER	14
++#define R6100_GPIO_LED_WAN_AMBER	15
++#define R6100_GPIO_LED_POWER_GREEN	17
++
++#define R6100_GPIO_BTN_WIRELESS		1
++#define R6100_GPIO_BTN_WPS		3
++#define R6100_GPIO_BTN_RESET		12
++
++#define R6100_GPIO_USB_POWER		16
++
++#define R6100_KEYS_POLL_INTERVAL	20	/* msecs */
++#define R6100_KEYS_DEBOUNCE_INTERVAL	(3 * R6100_KEYS_POLL_INTERVAL)
++
++static struct gpio_led r6100_leds_gpio[] __initdata = {
++	{
++		.name		= "netgear:green:power",
++		.gpio		= R6100_GPIO_LED_POWER_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:power",
++		.gpio		= R6100_GPIO_LED_POWER_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:wan",
++		.gpio		= R6100_GPIO_LED_WAN_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:wan",
++		.gpio		= R6100_GPIO_LED_WAN_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:blue:usb",
++		.gpio		= R6100_GPIO_LED_USB,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:blue:wlan",
++		.gpio		= R6100_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button r6100_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= R6100_GPIO_BTN_RESET,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= R6100_GPIO_BTN_WPS,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "RFKILL switch",
++		.type		= EV_SW,
++		.code		= KEY_RFKILL,
++		.debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= R6100_GPIO_BTN_WIRELESS,
++		.active_low	= 0,
++	},
++};
++
++static void __init r6100_setup(void)
++{
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(r6100_leds_gpio),
++				 r6100_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, R6100_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(r6100_gpio_keys),
++					r6100_gpio_keys);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
++
++	ath79_register_mdio(1, 0x0);
++
++	/* GMAC0 is connected to the PHY0 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++
++	gpio_request_one(R6100_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++
++	ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
++	ath79_register_nfc();
++
++	ath79_register_usb();
++
++	ath79_register_wmac_simple();
++
++	ap91_pci_init_simple();
++}
++
++MIPS_MACHINE(ATH79_MACH_R6100, "R6100", "NETGEAR R6100",
++	     r6100_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-rb2011.c linux-4.1.13/arch/mips/ath79/mach-rb2011.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-rb2011.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-rb2011.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,338 @@
++/*
++ *  MikroTik RouterBOARD 2011 support
++ *
++ *  Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#define pr_fmt(fmt) "rb2011: " fmt
++
++#include <linux/phy.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/routerboot.h>
++#include <linux/gpio.h>
++
++#include <asm/prom.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "routerboot.h"
++
++#define RB2011_GPIO_NAND_NCE	14
++#define RB2011_GPIO_SFP_LOS	21
++
++#define RB_ROUTERBOOT_OFFSET	0x0000
++#define RB_ROUTERBOOT_MIN_SIZE	0xb000
++#define RB_HARD_CFG_SIZE	0x1000
++#define RB_BIOS_OFFSET		0xd000
++#define RB_BIOS_SIZE		0x1000
++#define RB_SOFT_CFG_OFFSET	0xf000
++#define RB_SOFT_CFG_SIZE	0x1000
++
++#define RB_ART_SIZE		0x10000
++
++#define RB2011_FLAG_SFP		BIT(0)
++#define RB2011_FLAG_USB		BIT(1)
++#define RB2011_FLAG_WLAN	BIT(2)
++
++static struct mtd_partition rb2011_spi_partitions[] = {
++	{
++		.name		= "routerboot",
++		.offset		= RB_ROUTERBOOT_OFFSET,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "hard_config",
++		.size		= RB_HARD_CFG_SIZE,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "bios",
++		.offset		= RB_BIOS_OFFSET,
++		.size		= RB_BIOS_SIZE,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "soft_config",
++		.size		= RB_SOFT_CFG_SIZE,
++	}
++};
++
++static void __init rb2011_init_partitions(const struct rb_info *info)
++{
++	rb2011_spi_partitions[0].size = info->hard_cfg_offs;
++	rb2011_spi_partitions[1].offset = info->hard_cfg_offs;
++	rb2011_spi_partitions[3].offset = info->soft_cfg_offs;
++}
++
++static struct mtd_partition rb2011_nand_partitions[] = {
++	{
++		.name	= "booter",
++		.offset	= 0,
++		.size	= (256 * 1024),
++		.mask_flags = MTD_WRITEABLE,
++	},
++	{
++		.name	= "kernel",
++		.offset	= (256 * 1024),
++		.size	= (4 * 1024 * 1024) - (256 * 1024),
++	},
++	{
++		.name	= "rootfs",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static struct flash_platform_data rb2011_spi_flash_data = {
++	.parts		= rb2011_spi_partitions,
++	.nr_parts	= ARRAY_SIZE(rb2011_spi_partitions),
++};
++
++static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL3,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
++};
++
++static struct ar8327_pad_cfg rb2011_ar8327_pad6_cfg;
++static struct ar8327_sgmii_cfg rb2011_ar8327_sgmii_cfg;
++
++static struct ar8327_led_cfg rb2011_ar8327_led_cfg = {
++	.led_ctrl0 = 0xc731c731,
++	.led_ctrl1 = 0x00000000,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x0030c300,
++	.open_drain = false,
++};
++
++static const struct ar8327_led_info rb2011_ar8327_leds[] __initconst = {
++	AR8327_LED_INFO(PHY0_0, HW, "rb:green:eth1"),
++	AR8327_LED_INFO(PHY1_0, HW, "rb:green:eth2"),
++	AR8327_LED_INFO(PHY2_0, HW, "rb:green:eth3"),
++	AR8327_LED_INFO(PHY3_0, HW, "rb:green:eth4"),
++	AR8327_LED_INFO(PHY4_0, HW, "rb:green:eth5"),
++	AR8327_LED_INFO(PHY0_1, SW, "rb:green:eth6"),
++	AR8327_LED_INFO(PHY1_1, SW, "rb:green:eth7"),
++	AR8327_LED_INFO(PHY2_1, SW, "rb:green:eth8"),
++	AR8327_LED_INFO(PHY3_1, SW, "rb:green:eth9"),
++	AR8327_LED_INFO(PHY4_1, SW, "rb:green:eth10"),
++	AR8327_LED_INFO(PHY4_2, SW, "rb:green:usr"),
++};
++
++static struct ar8327_platform_data rb2011_ar8327_data = {
++	.pad0_cfg = &rb2011_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &rb2011_ar8327_led_cfg,
++	.num_leds = ARRAY_SIZE(rb2011_ar8327_leds),
++	.leds = rb2011_ar8327_leds,
++};
++
++static struct mdio_board_info rb2011_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &rb2011_ar8327_data,
++	},
++};
++
++static void __init rb2011_wlan_init(void)
++{
++	char *art_buf;
++	u8 wlan_mac[ETH_ALEN];
++
++	art_buf = rb_get_wlan_data();
++	if (art_buf == NULL)
++		return;
++
++	ath79_init_mac(wlan_mac, ath79_mac_base, 11);
++	ath79_register_wmac(art_buf + 0x1000, wlan_mac);
++
++	kfree(art_buf);
++}
++
++static void rb2011_nand_select_chip(int chip_no)
++{
++	switch (chip_no) {
++	case 0:
++		gpio_set_value(RB2011_GPIO_NAND_NCE, 0);
++		break;
++	default:
++		gpio_set_value(RB2011_GPIO_NAND_NCE, 1);
++		break;
++	}
++	ndelay(500);
++}
++
++static struct nand_ecclayout rb2011_nand_ecclayout = {
++	.eccbytes	= 6,
++	.eccpos		= { 8, 9, 10, 13, 14, 15 },
++	.oobavail	= 9,
++	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static int rb2011_nand_scan_fixup(struct mtd_info *mtd)
++{
++	struct nand_chip *chip = mtd->priv;
++
++	if (mtd->writesize == 512) {
++		/*
++		 * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
++		 * will not be able to find the kernel that we load.
++		 */
++		chip->ecc.layout = &rb2011_nand_ecclayout;
++	}
++
++	return 0;
++}
++
++static void __init rb2011_nand_init(void)
++{
++	gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
++
++	ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup);
++	ath79_nfc_set_parts(rb2011_nand_partitions,
++			    ARRAY_SIZE(rb2011_nand_partitions));
++	ath79_nfc_set_select_chip(rb2011_nand_select_chip);
++	ath79_nfc_set_swap_dma(true);
++	ath79_register_nfc();
++}
++
++static int rb2011_get_port_link(unsigned port)
++{
++	if (port != 6)
++		return -EINVAL;
++
++	/* The Loss of signal line is active low */
++	return !gpio_get_value(RB2011_GPIO_SFP_LOS);
++}
++
++static void __init rb2011_sfp_init(void)
++{
++	gpio_request_one(RB2011_GPIO_SFP_LOS, GPIOF_IN, "SFP LOS");
++
++	rb2011_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
++
++	rb2011_ar8327_data.pad6_cfg = &rb2011_ar8327_pad6_cfg;
++
++	rb2011_ar8327_sgmii_cfg.sgmii_ctrl = 0xc70167d0;
++	rb2011_ar8327_sgmii_cfg.serdes_aen = true;
++
++	rb2011_ar8327_data.sgmii_cfg = &rb2011_ar8327_sgmii_cfg;
++
++	rb2011_ar8327_data.port6_cfg.force_link = 1;
++	rb2011_ar8327_data.port6_cfg.speed = AR8327_PORT_SPEED_1000;
++	rb2011_ar8327_data.port6_cfg.duplex = 1;
++
++	rb2011_ar8327_data.get_port_link = rb2011_get_port_link;
++}
++
++static int __init rb2011_setup(u32 flags)
++{
++	const struct rb_info *info;
++	char buf[64];
++
++	info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
++	if (!info)
++		return -ENODEV;
++
++	scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
++		  (info->board_name) ? info->board_name : "");
++	mips_set_machine_name(buf);
++
++	rb2011_init_partitions(info);
++
++	ath79_register_m25p80(&rb2011_spi_flash_data);
++	rb2011_nand_init();
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++	ath79_register_mdio(0, 0x0);
++
++	mdiobus_register_board_info(rb2011_mdio0_info,
++				    ARRAY_SIZE(rb2011_mdio0_info));
++
++	/* GMAC0 is connected to an ar8327 switch */
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(1);
++
++	if (flags & RB2011_FLAG_SFP)
++		rb2011_sfp_init();
++
++	if (flags & RB2011_FLAG_WLAN)
++		rb2011_wlan_init();
++
++	if (flags & RB2011_FLAG_USB)
++		ath79_register_usb();
++
++	return 0;
++}
++
++static void __init rb2011l_setup(void)
++{
++	rb2011_setup(0);
++}
++
++MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011L, "2011L", rb2011l_setup);
++
++static void __init rb2011us_setup(void)
++{
++	rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB);
++}
++
++MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup);
++
++static void __init rb2011r5_setup(void)
++{
++	rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN);
++}
++
++MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup);
++
++static void __init rb2011g_setup(void)
++{
++	rb2011_setup(RB2011_FLAG_SFP |
++		     RB2011_FLAG_USB |
++		     RB2011_FLAG_WLAN);
++}
++
++MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011G, "2011G", rb2011g_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-rb4xx.c linux-4.1.13/arch/mips/ath79/mach-rb4xx.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-rb4xx.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-rb4xx.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,465 @@
++/*
++ *  MikroTik RouterBOARD 4xx series support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/mdio-gpio.h>
++#include <linux/mmc/host.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/mmc_spi.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/rb4xx_cpld.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define RB4XX_GPIO_USER_LED	4
++#define RB4XX_GPIO_RESET_SWITCH	7
++
++#define RB4XX_GPIO_CPLD_BASE	32
++#define RB4XX_GPIO_CPLD_LED1	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
++#define RB4XX_GPIO_CPLD_LED2	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
++#define RB4XX_GPIO_CPLD_LED3	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
++#define RB4XX_GPIO_CPLD_LED4	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
++#define RB4XX_GPIO_CPLD_LED5	(RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
++
++#define RB4XX_KEYS_POLL_INTERVAL	20	/* msecs */
++#define RB4XX_KEYS_DEBOUNCE_INTERVAL	(3 * RB4XX_KEYS_POLL_INTERVAL)
++
++static struct gpio_led rb4xx_leds_gpio[] __initdata = {
++	{
++		.name		= "rb4xx:yellow:user",
++		.gpio		= RB4XX_GPIO_USER_LED,
++		.active_low	= 0,
++	}, {
++		.name		= "rb4xx:green:led1",
++		.gpio		= RB4XX_GPIO_CPLD_LED1,
++		.active_low	= 1,
++	}, {
++		.name		= "rb4xx:green:led2",
++		.gpio		= RB4XX_GPIO_CPLD_LED2,
++		.active_low	= 1,
++	}, {
++		.name		= "rb4xx:green:led3",
++		.gpio		= RB4XX_GPIO_CPLD_LED3,
++		.active_low	= 1,
++	}, {
++		.name		= "rb4xx:green:led4",
++		.gpio		= RB4XX_GPIO_CPLD_LED4,
++		.active_low	= 1,
++	}, {
++		.name		= "rb4xx:green:led5",
++		.gpio		= RB4XX_GPIO_CPLD_LED5,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset_switch",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= RB4XX_GPIO_RESET_SWITCH,
++		.active_low	= 1,
++	}
++};
++
++static struct platform_device rb4xx_nand_device = {
++	.name	= "rb4xx-nand",
++	.id	= -1,
++};
++
++static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = {
++	{
++		.slot	= 17,
++		.pin	= 1,
++		.irq	= ATH79_PCI_IRQ(2),
++	}, {
++		.slot	= 18,
++		.pin	= 1,
++		.irq	= ATH79_PCI_IRQ(0),
++	}, {
++		.slot	= 18,
++		.pin	= 2,
++		.irq	= ATH79_PCI_IRQ(1),
++	}, {
++		.slot	= 19,
++		.pin	= 1,
++		.irq	= ATH79_PCI_IRQ(1),
++	}, {
++		.slot	= 19,
++		.pin	= 2,
++		.irq	= ATH79_PCI_IRQ(2),
++	}, {
++		.slot	= 20,
++		.pin	= 1,
++		.irq	= ATH79_PCI_IRQ(2),
++	}, {
++		.slot	= 20,
++		.pin	= 2,
++		.irq	= ATH79_PCI_IRQ(0),
++	}, {
++		.slot	= 21,
++		.pin	= 1,
++		.irq	= ATH79_PCI_IRQ(0),
++	}, {
++		.slot	= 22,
++		.pin	= 1,
++		.irq	= ATH79_PCI_IRQ(1),
++	}, {
++		.slot	= 22,
++		.pin	= 2,
++		.irq	= ATH79_PCI_IRQ(2),
++	}, {
++		.slot	= 23,
++		.pin	= 1,
++		.irq	= ATH79_PCI_IRQ(2),
++	}, {
++		.slot	= 23,
++		.pin	= 2,
++		.irq	= ATH79_PCI_IRQ(0),
++	}
++};
++
++static struct mtd_partition rb4xx_partitions[] = {
++	{
++		.name		= "routerboot",
++		.offset		= 0,
++		.size		= 0x0b000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "hard_config",
++		.offset		= 0x0b000,
++		.size		= 0x01000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "bios",
++		.offset		= 0x0d000,
++		.size		= 0x02000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "soft_config",
++		.offset		= 0x0f000,
++		.size		= 0x01000,
++	}
++};
++
++static struct flash_platform_data rb4xx_flash_data = {
++	.type		= "pm25lv512",
++	.parts		= rb4xx_partitions,
++	.nr_parts	= ARRAY_SIZE(rb4xx_partitions),
++};
++
++static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
++	.gpio_base	= RB4XX_GPIO_CPLD_BASE,
++};
++
++static struct mmc_spi_platform_data rb4xx_mmc_data = {
++	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
++};
++
++static struct spi_board_info rb4xx_spi_info[] = {
++	{
++		.bus_num	= 0,
++		.chip_select	= 0,
++		.max_speed_hz	= 25000000,
++		.modalias	= "m25p80",
++		.platform_data	= &rb4xx_flash_data,
++	}, {
++		.bus_num	= 0,
++		.chip_select	= 1,
++		.max_speed_hz	= 25000000,
++		.modalias	= "spi-rb4xx-cpld",
++		.platform_data	= &rb4xx_cpld_data,
++	}
++};
++
++static struct spi_board_info rb4xx_microsd_info[] = {
++	{
++		.bus_num	= 0,
++		.chip_select	= 2,
++		.max_speed_hz	= 25000000,
++		.modalias	= "mmc_spi",
++		.platform_data	= &rb4xx_mmc_data,
++	}
++};
++
++
++static struct resource rb4xx_spi_resources[] = {
++	{
++		.start	= AR71XX_SPI_BASE,
++		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct platform_device rb4xx_spi_device = {
++	.name		= "rb4xx-spi",
++	.id		= -1,
++	.resource	= rb4xx_spi_resources,
++	.num_resources	= ARRAY_SIZE(rb4xx_spi_resources),
++};
++
++static void __init rb4xx_generic_setup(void)
++{
++	ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
++				   AR71XX_GPIO_FUNC_SPI_CS2_EN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
++					rb4xx_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(rb4xx_gpio_keys),
++					rb4xx_gpio_keys);
++
++	spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
++	platform_device_register(&rb4xx_spi_device);
++	platform_device_register(&rb4xx_nand_device);
++}
++
++static void __init rb411_setup(void)
++{
++	rb4xx_generic_setup();
++	spi_register_board_info(rb4xx_microsd_info,
++				ARRAY_SIZE(rb4xx_microsd_info));
++
++	ath79_register_mdio(0, 0xfffffffc);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = 0x00000003;
++
++	ath79_register_eth(0);
++
++	ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
++	     rb411_setup);
++
++static void __init rb411u_setup(void)
++{
++	rb411_setup();
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
++	     rb411u_setup);
++
++#define RB433_LAN_PHYMASK	BIT(0)
++#define RB433_WAN_PHYMASK	BIT(4)
++#define RB433_MDIO_PHYMASK	(RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
++
++static void __init rb433_setup(void)
++{
++	rb4xx_generic_setup();
++	spi_register_board_info(rb4xx_microsd_info,
++				ARRAY_SIZE(rb4xx_microsd_info));
++
++	ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
++	     rb433_setup);
++
++static void __init rb433u_setup(void)
++{
++	rb433_setup();
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
++	     rb433u_setup);
++
++static void __init rb435g_setup(void)
++{
++	rb4xx_generic_setup();
++
++	spi_register_board_info(rb4xx_microsd_info,
++				ARRAY_SIZE(rb4xx_microsd_info));
++
++	ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++	ath79_register_pci();
++
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_435G, "435G", "MikroTik RouterBOARD 435G",
++	     rb435g_setup);
++
++#define RB450_LAN_PHYMASK	BIT(0)
++#define RB450_WAN_PHYMASK	BIT(4)
++#define RB450_MDIO_PHYMASK	(RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
++
++static void __init rb450_generic_setup(int gige)
++{
++	rb4xx_generic_setup();
++	ath79_register_mdio(0, ~RB450_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth0_data.phy_if_mode = (gige) ?
++		PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth1_data.phy_if_mode = (gige) ?
++		PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK;
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++}
++
++static void __init rb450_setup(void)
++{
++	rb450_generic_setup(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
++	     rb450_setup);
++
++static void __init rb450g_setup(void)
++{
++	rb450_generic_setup(1);
++	spi_register_board_info(rb4xx_microsd_info,
++				ARRAY_SIZE(rb4xx_microsd_info));
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
++	     rb450g_setup);
++
++static void __init rb493_setup(void)
++{
++	rb4xx_generic_setup();
++
++	ath79_register_mdio(0, 0x3fffff00);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = 0x00000001;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
++	     rb493_setup);
++
++#define RB493G_GPIO_MDIO_MDC		7
++#define RB493G_GPIO_MDIO_DATA		8
++
++#define RB493G_MDIO_PHYMASK		BIT(0)
++
++static struct mdio_gpio_platform_data rb493g_mdio_data = {
++	.mdc		= RB493G_GPIO_MDIO_MDC,
++	.mdio		= RB493G_GPIO_MDIO_DATA,
++
++	.phy_mask	= ~RB493G_MDIO_PHYMASK,
++};
++
++static struct platform_device rb493g_mdio_device = {
++	.name 		= "mdio-gpio",
++	.id 		= -1,
++	.dev 		= {
++		.platform_data	= &rb493g_mdio_data,
++	},
++};
++
++static void __init rb493g_setup(void)
++{
++	ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
++				    AR71XX_GPIO_FUNC_SPI_CS2_EN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
++				    rb4xx_leds_gpio);
++
++	spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
++	spi_register_board_info(rb4xx_microsd_info,
++				ARRAY_SIZE(rb4xx_microsd_info));
++
++	platform_device_register(&rb4xx_spi_device);
++	platform_device_register(&rb4xx_nand_device);
++
++	ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
++	ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	platform_device_register(&rb493g_mdio_device);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_usb();
++
++	ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
++	     rb493g_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-rb750.c linux-4.1.13/arch/mips/ath79/mach-rb750.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-rb750.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-rb750.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,346 @@
++/*
++ *  MikroTik RouterBOARD 750/750GL support
++ *
++ *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/export.h>
++#include <linux/pci.h>
++#include <linux/ath9k_platform.h>
++#include <linux/platform_device.h>
++#include <linux/phy.h>
++#include <linux/ar8216_platform.h>
++#include <linux/rle.h>
++#include <linux/routerboot.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/irq.h>
++#include <asm/mach-ath79/mach-rb750.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-usb.h"
++#include "dev-eth.h"
++#include "machtypes.h"
++#include "routerboot.h"
++
++static struct rb750_led_data rb750_leds[] = {
++	{
++		.name		= "rb750:green:act",
++		.mask		= RB750_LED_ACT,
++		.active_low	= 1,
++	}, {
++		.name		= "rb750:green:port1",
++		.mask		= RB750_LED_PORT5,
++		.active_low	= 1,
++	}, {
++		.name		= "rb750:green:port2",
++		.mask		= RB750_LED_PORT4,
++		.active_low	= 1,
++	}, {
++		.name		= "rb750:green:port3",
++		.mask		= RB750_LED_PORT3,
++		.active_low	= 1,
++	}, {
++		.name		= "rb750:green:port4",
++		.mask		= RB750_LED_PORT2,
++		.active_low	= 1,
++	}, {
++		.name		= "rb750:green:port5",
++		.mask		= RB750_LED_PORT1,
++		.active_low	= 1,
++	}
++};
++
++static struct rb750_led_data rb750gr3_leds[] = {
++	{
++		.name		= "rb750:green:act",
++		.mask		= RB7XX_LED_ACT,
++		.active_low	= 1,
++	},
++};
++
++static struct rb750_led_platform_data rb750_leds_data;
++static struct platform_device rb750_leds_device = {
++	.name	= "leds-rb750",
++	.dev	= {
++		.platform_data = &rb750_leds_data,
++	}
++};
++
++static struct rb7xx_nand_platform_data rb750_nand_data;
++static struct platform_device rb750_nand_device = {
++	.name	= "rb750-nand",
++	.id	= -1,
++	.dev	= {
++		.platform_data = &rb750_nand_data,
++	}
++};
++
++static void rb750_latch_change(u32 mask_clr, u32 mask_set)
++{
++	static DEFINE_SPINLOCK(lock);
++	static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
++	static u32 latch_oe;
++	static u32 latch_clr;
++	unsigned long flags;
++	u32 t;
++
++	spin_lock_irqsave(&lock, flags);
++
++	if ((mask_clr & BIT(31)) != 0 &&
++	    (latch_set & RB750_LVC573_LE) == 0) {
++		goto unlock;
++	}
++
++	latch_set = (latch_set | mask_set) & ~mask_clr;
++	latch_clr = (latch_clr | mask_clr) & ~mask_set;
++
++	if (latch_oe == 0)
++		latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
++
++	if (likely(latch_set & RB750_LVC573_LE)) {
++		void __iomem *base = ath79_gpio_base;
++
++		t = __raw_readl(base + AR71XX_GPIO_REG_OE);
++		t |= mask_clr | latch_oe | mask_set;
++
++		__raw_writel(t, base + AR71XX_GPIO_REG_OE);
++		__raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
++		__raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
++	} else if (mask_clr & RB750_LVC573_LE) {
++		void __iomem *base = ath79_gpio_base;
++
++		latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
++		__raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
++		/* flush write */
++		__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
++	}
++
++unlock:
++	spin_unlock_irqrestore(&lock, flags);
++}
++
++static void rb750_nand_enable_pins(void)
++{
++	rb750_latch_change(RB750_LVC573_LE, 0);
++	ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
++				  AR724X_GPIO_FUNC_SPI_EN);
++}
++
++static void rb750_nand_disable_pins(void)
++{
++	ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
++				  AR724X_GPIO_FUNC_JTAG_DISABLE);
++	rb750_latch_change(0, RB750_LVC573_LE);
++}
++
++static void __init rb750_setup(void)
++{
++	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				     AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				     AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				     AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				     AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++
++	/* WAN port */
++	ath79_register_eth(0);
++
++	rb750_leds_data.num_leds = ARRAY_SIZE(rb750_leds);
++	rb750_leds_data.leds = rb750_leds;
++	rb750_leds_data.latch_change = rb750_latch_change;
++	platform_device_register(&rb750_leds_device);
++
++	rb750_nand_data.nce_line = RB750_NAND_NCE;
++	rb750_nand_data.enable_pins = rb750_nand_enable_pins;
++	rb750_nand_data.disable_pins = rb750_nand_disable_pins;
++	rb750_nand_data.latch_change = rb750_latch_change;
++	platform_device_register(&rb750_nand_device);
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
++	     rb750_setup);
++
++static struct ar8327_pad_cfg rb750gr3_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data rb750gr3_ar8327_data = {
++	.pad0_cfg = &rb750gr3_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	}
++};
++
++static struct mdio_board_info rb750g3_mdio_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &rb750gr3_ar8327_data,
++	},
++};
++
++static void rb750gr3_nand_enable_pins(void)
++{
++	ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
++				  AR724X_GPIO_FUNC_SPI_EN |
++				  AR724X_GPIO_FUNC_SPI_CS_EN2);
++}
++
++static void rb750gr3_nand_disable_pins(void)
++{
++	ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN |
++				  AR724X_GPIO_FUNC_SPI_CS_EN2,
++				  AR724X_GPIO_FUNC_JTAG_DISABLE);
++}
++
++static void rb750gr3_latch_change(u32 mask_clr, u32 mask_set)
++{
++	static DEFINE_SPINLOCK(lock);
++	static u32 latch_set = RB7XX_LED_ACT;
++	static u32 latch_clr;
++	void __iomem *base = ath79_gpio_base;
++	unsigned long flags;
++	u32 t;
++
++	spin_lock_irqsave(&lock, flags);
++
++	latch_set = (latch_set | mask_set) & ~mask_clr;
++	latch_clr = (latch_clr | mask_clr) & ~mask_set;
++
++	mask_set = latch_set & (RB7XX_USB_POWERON | RB7XX_MONITOR);
++	mask_clr = latch_clr & (RB7XX_USB_POWERON | RB7XX_MONITOR);
++
++	if ((latch_set ^ RB7XX_LED_ACT) & RB7XX_LED_ACT) {
++		/* enable output mode */
++		t = __raw_readl(base + AR71XX_GPIO_REG_OE);
++		t |= RB7XX_LED_ACT;
++		__raw_writel(t, base + AR71XX_GPIO_REG_OE);
++
++		mask_clr |= RB7XX_LED_ACT;
++	} else {
++		/* disable output mode */
++		t = __raw_readl(base + AR71XX_GPIO_REG_OE);
++		t &= ~RB7XX_LED_ACT;
++		__raw_writel(t, base + AR71XX_GPIO_REG_OE);
++	}
++
++	__raw_writel(mask_set, base + AR71XX_GPIO_REG_SET);
++	__raw_writel(mask_clr, base + AR71XX_GPIO_REG_CLEAR);
++
++	spin_unlock_irqrestore(&lock, flags);
++}
++
++static void __init rb750gr3_setup(void)
++{
++	ath79_register_mdio(0, 0x0);
++	mdiobus_register_board_info(rb750g3_mdio_info,
++				    ARRAY_SIZE(rb750g3_mdio_info));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_pll_data.pll_1000 = 0x62000000;
++
++	ath79_register_eth(0);
++
++	rb750_leds_data.num_leds = ARRAY_SIZE(rb750gr3_leds);
++	rb750_leds_data.leds = rb750gr3_leds;
++	rb750_leds_data.latch_change = rb750gr3_latch_change;
++	platform_device_register(&rb750_leds_device);
++
++	rb750_nand_data.nce_line = RB7XX_NAND_NCE;
++	rb750_nand_data.enable_pins = rb750gr3_nand_enable_pins;
++	rb750_nand_data.disable_pins = rb750gr3_nand_disable_pins;
++	rb750_nand_data.latch_change = rb750gr3_latch_change;
++	platform_device_register(&rb750_nand_device);
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL",
++	     rb750gr3_setup);
++
++#define RB751_HARDCONFIG	0x1f00b000
++#define RB751_HARDCONFIG_SIZE	0x1000
++
++static void __init rb751_wlan_setup(void)
++{
++	u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG);
++	struct ath9k_platform_data *wmac_data;
++	u16 tag_len;
++	u8 *tag;
++	u16 mac_len;
++	u8 *mac;
++	int err;
++
++	wmac_data = ap9x_pci_get_wmac_data(0);
++	if (!wmac_data) {
++		pr_err("rb75x: unable to get address of wlan data\n");
++		return;
++	}
++
++	ap9x_pci_setup_wmac_led_pin(0, 9);
++
++	err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
++				  RB_ID_WLAN_DATA, &tag, &tag_len);
++	if (err) {
++		pr_err("rb75x: no calibration data found\n");
++		return;
++	}
++
++	err = rle_decode(tag, tag_len, (unsigned char *) wmac_data->eeprom_data,
++			 sizeof(wmac_data->eeprom_data), NULL, NULL);
++	if (err) {
++		pr_err("rb75x: unable to decode wlan eeprom data\n");
++		return;
++	}
++
++	err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
++                                 RB_ID_MAC_ADDRESS_PACK, &mac, &mac_len);
++	if (err) {
++		pr_err("rb75x: no mac address found\n");
++		return;
++	}
++
++	ap91_pci_init(NULL, mac);
++}
++
++static void __init rb751_setup(void)
++{
++	rb750_setup();
++	ath79_register_usb();
++	rb751_wlan_setup();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_751, "751", "MikroTik RouterBOARD 751",
++	     rb751_setup);
++
++static void __init rb751g_setup(void)
++{
++	rb750gr3_setup();
++	ath79_register_usb();
++	rb751_wlan_setup();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_751G, "751g", "MikroTik RouterBOARD 751G",
++	     rb751g_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-rb91x.c linux-4.1.13/arch/mips/ath79/mach-rb91x.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-rb91x.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-rb91x.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,349 @@
++/*
++ *  MikroTik RouterBOARD 91X support
++ *
++ *  Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#define pr_fmt(fmt) "rb91x: " fmt
++
++#include <linux/phy.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/74x164.h>
++#include <linux/spi/flash.h>
++#include <linux/routerboot.h>
++#include <linux/gpio.h>
++#include <linux/platform_data/gpio-latch.h>
++#include <linux/platform_data/rb91x_nand.h>
++#include <linux/platform_data/phy-at803x.h>
++
++#include <asm/prom.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ath79_spi_platform.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-nfc.h"
++#include "dev-usb.h"
++#include "dev-spi.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "pci.h"
++#include "routerboot.h"
++
++#define RB_ROUTERBOOT_OFFSET	0x0000
++#define RB_ROUTERBOOT_MIN_SIZE	0xb000
++#define RB_HARD_CFG_SIZE	0x1000
++#define RB_BIOS_OFFSET		0xd000
++#define RB_BIOS_SIZE		0x1000
++#define RB_SOFT_CFG_OFFSET	0xf000
++#define RB_SOFT_CFG_SIZE	0x1000
++
++#define RB91X_FLAG_USB		BIT(0)
++#define RB91X_FLAG_PCIE		BIT(1)
++
++#define RB91X_LATCH_GPIO_BASE	AR934X_GPIO_COUNT
++#define RB91X_LATCH_GPIO(_x)	(RB91X_LATCH_GPIO_BASE + (_x))
++
++#define RB91X_SSR_GPIO_BASE	(RB91X_LATCH_GPIO_BASE + AR934X_GPIO_COUNT)
++#define RB91X_SSR_GPIO(_x)	(RB91X_SSR_GPIO_BASE + (_x))
++
++#define RB91X_SSR_BIT_LED1		0
++#define RB91X_SSR_BIT_LED2		1
++#define RB91X_SSR_BIT_LED3		2
++#define RB91X_SSR_BIT_LED4		3
++#define RB91X_SSR_BIT_LED5		4
++#define RB91X_SSR_BIT_5			5
++#define RB91X_SSR_BIT_USB_POWER		6
++#define RB91X_SSR_BIT_PCIE_POWER	7
++
++#define RB91X_GPIO_SSR_STROBE	RB91X_LATCH_GPIO(0)
++#define RB91X_GPIO_LED_POWER	RB91X_LATCH_GPIO(1)
++#define RB91X_GPIO_LED_USER	RB91X_LATCH_GPIO(2)
++#define RB91X_GPIO_NAND_READ	RB91X_LATCH_GPIO(3)
++#define RB91X_GPIO_NAND_RDY	RB91X_LATCH_GPIO(4)
++#define RB91X_GPIO_NLE		RB91X_LATCH_GPIO(11)
++#define RB91X_GPIO_NAND_NRW	RB91X_LATCH_GPIO(12)
++#define RB91X_GPIO_NAND_NCE	RB91X_LATCH_GPIO(13)
++#define RB91X_GPIO_NAND_CLE	RB91X_LATCH_GPIO(14)
++#define RB91X_GPIO_NAND_ALE	RB91X_LATCH_GPIO(15)
++
++#define RB91X_GPIO_LED_1	RB91X_SSR_GPIO(RB91X_SSR_BIT_LED1)
++#define RB91X_GPIO_LED_2	RB91X_SSR_GPIO(RB91X_SSR_BIT_LED2)
++#define RB91X_GPIO_LED_3	RB91X_SSR_GPIO(RB91X_SSR_BIT_LED3)
++#define RB91X_GPIO_LED_4	RB91X_SSR_GPIO(RB91X_SSR_BIT_LED4)
++#define RB91X_GPIO_LED_5	RB91X_SSR_GPIO(RB91X_SSR_BIT_LED5)
++#define RB91X_GPIO_USB_POWER	RB91X_SSR_GPIO(RB91X_SSR_BIT_USB_POWER)
++#define RB91X_GPIO_PCIE_POWER	RB91X_SSR_GPIO(RB91X_SSR_BIT_PCIE_POWER)
++
++struct rb_board_info {
++	const char *name;
++	u32 flags;
++};
++
++static struct mtd_partition rb711gr100_spi_partitions[] = {
++	{
++		.name		= "routerboot",
++		.offset		= RB_ROUTERBOOT_OFFSET,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "hard_config",
++		.size		= RB_HARD_CFG_SIZE,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "bios",
++		.offset		= RB_BIOS_OFFSET,
++		.size		= RB_BIOS_SIZE,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "soft_config",
++		.size		= RB_SOFT_CFG_SIZE,
++	}
++};
++
++static struct flash_platform_data rb711gr100_spi_flash_data = {
++	.parts		= rb711gr100_spi_partitions,
++	.nr_parts	= ARRAY_SIZE(rb711gr100_spi_partitions),
++};
++
++static int rb711gr100_gpio_latch_gpios[AR934X_GPIO_COUNT] __initdata = {
++	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
++	12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22
++};
++
++static struct gpio_latch_platform_data rb711gr100_gpio_latch_data __initdata = {
++	.base = RB91X_LATCH_GPIO_BASE,
++	.num_gpios = ARRAY_SIZE(rb711gr100_gpio_latch_gpios),
++	.gpios = rb711gr100_gpio_latch_gpios,
++	.le_gpio_index = 11,
++	.le_active_low = true,
++};
++
++static struct rb91x_nand_platform_data rb711gr100_nand_data __initdata = {
++	.gpio_nce = RB91X_GPIO_NAND_NCE,
++	.gpio_ale = RB91X_GPIO_NAND_ALE,
++	.gpio_cle = RB91X_GPIO_NAND_CLE,
++	.gpio_rdy = RB91X_GPIO_NAND_RDY,
++	.gpio_read = RB91X_GPIO_NAND_READ,
++	.gpio_nrw = RB91X_GPIO_NAND_NRW,
++	.gpio_nle = RB91X_GPIO_NLE,
++};
++
++static u8 rb711gr100_ssr_initdata[] __initdata = {
++	BIT(RB91X_SSR_BIT_PCIE_POWER) |
++	BIT(RB91X_SSR_BIT_USB_POWER) |
++	BIT(RB91X_SSR_BIT_5)
++};
++
++static struct gen_74x164_chip_platform_data rb711gr100_ssr_data = {
++	.base = RB91X_SSR_GPIO_BASE,
++	.num_registers = ARRAY_SIZE(rb711gr100_ssr_initdata),
++	.init_data = rb711gr100_ssr_initdata,
++};
++
++static struct ath79_spi_controller_data rb711gr100_spi0_cdata = {
++	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++	.cs_line = 0,
++	.is_flash = true,
++};
++
++static struct ath79_spi_controller_data rb711gr100_spi1_cdata = {
++	.cs_type = ATH79_SPI_CS_TYPE_GPIO,
++	.cs_line = RB91X_GPIO_SSR_STROBE,
++};
++
++static struct spi_board_info rb711gr100_spi_info[] = {
++	{
++		.bus_num	= 0,
++		.chip_select	= 0,
++		.max_speed_hz	= 25000000,
++		.modalias	= "m25p80",
++		.platform_data  = &rb711gr100_spi_flash_data,
++		.controller_data = &rb711gr100_spi0_cdata
++	}, {
++		.bus_num	= 0,
++		.chip_select	= 1,
++		.max_speed_hz	= 10000000,
++		.modalias	= "74x164",
++		.platform_data	= &rb711gr100_ssr_data,
++		.controller_data = &rb711gr100_spi1_cdata
++	}
++};
++
++static struct ath79_spi_platform_data rb711gr100_spi_data __initdata = {
++	.bus_num = 0,
++	.num_chipselect = 2,
++};
++
++static struct gpio_led rb711gr100_leds[] __initdata = {
++	{
++		.name		= "rb:green:led1",
++		.gpio		= RB91X_GPIO_LED_1,
++		.active_low	= 0,
++	},
++	{
++		.name		= "rb:green:led2",
++		.gpio		= RB91X_GPIO_LED_2,
++		.active_low	= 0,
++	},
++	{
++		.name		= "rb:green:led3",
++		.gpio		= RB91X_GPIO_LED_3,
++		.active_low	= 0,
++	},
++	{
++		.name		= "rb:green:led4",
++		.gpio		= RB91X_GPIO_LED_4,
++		.active_low	= 0,
++	},
++	{
++		.name		= "rb:green:led5",
++		.gpio		= RB91X_GPIO_LED_5,
++		.active_low	= 0,
++	},
++	{
++		.name		= "rb:green:user",
++		.gpio		= RB91X_GPIO_LED_USER,
++		.active_low	= 0,
++	},
++	{
++		.name		= "rb:green:power",
++		.gpio		= RB91X_GPIO_LED_POWER,
++		.active_low	= 0,
++	},
++};
++
++static struct at803x_platform_data rb91x_at803x_data = {
++	.disable_smarteee = 1,
++	.enable_rgmii_rx_delay = 1,
++	.enable_rgmii_tx_delay = 1,
++};
++
++static struct mdio_board_info rb91x_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &rb91x_at803x_data,
++	},
++};
++
++static void __init rb711gr100_init_partitions(const struct rb_info *info)
++{
++	rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
++	rb711gr100_spi_partitions[1].offset = info->hard_cfg_offs;
++
++	rb711gr100_spi_partitions[3].offset = info->soft_cfg_offs;
++}
++
++void __init rb711gr100_wlan_init(void)
++{
++	char *caldata;
++	u8 wlan_mac[ETH_ALEN];
++
++	caldata = rb_get_wlan_data();
++	if (caldata == NULL)
++		return;
++
++	ath79_init_mac(wlan_mac, ath79_mac_base, 1);
++	ath79_register_wmac(caldata + 0x1000, wlan_mac);
++
++	kfree(caldata);
++}
++
++#define RB_BOARD_INFO(_name, _flags)	\
++	{				\
++		.name = (_name),	\
++		.flags = (_flags),	\
++	}
++
++static const struct rb_board_info rb711gr100_boards[] __initconst = {
++	RB_BOARD_INFO("911G-2HPnD", 0),
++	RB_BOARD_INFO("911G-5HPnD", 0),
++	RB_BOARD_INFO("912UAG-2HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
++	RB_BOARD_INFO("912UAG-5HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
++};
++
++static u32 rb711gr100_get_flags(const struct rb_info *info)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(rb711gr100_boards); i++) {
++		const struct rb_board_info *bi;
++
++		bi = &rb711gr100_boards[i];
++		if (strcmp(info->board_name, bi->name) == 0)
++			return bi->flags;
++	}
++
++	return 0;
++}
++
++static void __init rb711gr100_setup(void)
++{
++	const struct rb_info *info;
++	char buf[64];
++	u32 flags;
++
++	info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
++	if (!info)
++		return;
++
++	scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
++		  (info->board_name) ? info->board_name : "");
++	mips_set_machine_name(buf);
++
++	rb711gr100_init_partitions(info);
++	ath79_register_spi(&rb711gr100_spi_data, rb711gr100_spi_info,
++			   ARRAY_SIZE(rb711gr100_spi_info));
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_RXD_DELAY |
++				   AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(0, 0x0);
++
++	mdiobus_register_board_info(rb91x_mdio0_info,
++				    ARRAY_SIZE(rb91x_mdio0_info));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_pll_data.pll_1000 = 0x02000000;
++
++	ath79_register_eth(0);
++
++	rb711gr100_wlan_init();
++
++	platform_device_register_data(NULL, "rb91x-nand", -1,
++				      &rb711gr100_nand_data,
++				      sizeof(rb711gr100_nand_data));
++
++	platform_device_register_data(NULL, "gpio-latch", -1,
++				      &rb711gr100_gpio_latch_data,
++				      sizeof(rb711gr100_gpio_latch_data));
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb711gr100_leds),
++				 rb711gr100_leds);
++
++	flags = rb711gr100_get_flags(info);
++
++	if (flags & RB91X_FLAG_USB)
++		ath79_register_usb();
++
++	if (flags & RB91X_FLAG_PCIE)
++		ath79_register_pci();
++
++}
++
++MIPS_MACHINE_NONAME(ATH79_MACH_RB_711GR100, "711Gr100", rb711gr100_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-rb922.c linux-4.1.13/arch/mips/ath79/mach-rb922.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-rb922.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-rb922.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,236 @@
++/*
++ *  MikroTik RouterBOARD 91X support
++ *
++ *  Copyright (C) 2015 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/phy.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/routerboot.h>
++#include <linux/gpio.h>
++#include <linux/platform_data/phy-at803x.h>
++
++#include <asm/prom.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
++#include "dev-usb.h"
++#include "dev-spi.h"
++#include "machtypes.h"
++#include "pci.h"
++#include "routerboot.h"
++
++#define RB922_GPIO_LED_USR	12
++#define RB922_GPIO_USB_POWER	13
++#define RB922_GPIO_FAN_CTRL	14
++#define RB922_GPIO_BTN_RESET	20
++#define RB922_GPIO_NAND_NCE	23
++
++#define RB922_PHY_ADDR		4
++
++#define RB922_KEYS_POLL_INTERVAL	20	/* msecs */
++#define RB922_KEYS_DEBOUNCE_INTERVAL	(3 * RB922_KEYS_POLL_INTERVAL)
++
++#define RB_ROUTERBOOT_OFFSET	0x0000
++#define RB_ROUTERBOOT_MIN_SIZE	0xb000
++#define RB_HARD_CFG_SIZE	0x1000
++#define RB_BIOS_OFFSET		0xd000
++#define RB_BIOS_SIZE		0x1000
++#define RB_SOFT_CFG_OFFSET	0xf000
++#define RB_SOFT_CFG_SIZE	0x1000
++
++static struct mtd_partition rb922gs_spi_partitions[] = {
++	{
++		.name		= "routerboot",
++		.offset		= RB_ROUTERBOOT_OFFSET,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "hard_config",
++		.size		= RB_HARD_CFG_SIZE,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "bios",
++		.offset		= RB_BIOS_OFFSET,
++		.size		= RB_BIOS_SIZE,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "soft_config",
++		.size		= RB_SOFT_CFG_SIZE,
++	}
++};
++
++static struct flash_platform_data rb922gs_spi_flash_data = {
++	.parts		= rb922gs_spi_partitions,
++	.nr_parts	= ARRAY_SIZE(rb922gs_spi_partitions),
++};
++
++static struct gpio_led rb922gs_leds[] __initdata = {
++	{
++		.name		= "rb:green:user",
++		.gpio		= RB922_GPIO_LED_USR,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button rb922gs_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = RB922_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= RB922_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static struct at803x_platform_data rb922gs_at803x_data = {
++	.disable_smarteee = 1,
++};
++
++static struct mdio_board_info rb922gs_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = RB922_PHY_ADDR,
++		.platform_data = &rb922gs_at803x_data,
++	},
++};
++
++static void __init rb922gs_init_partitions(const struct rb_info *info)
++{
++	rb922gs_spi_partitions[0].size = info->hard_cfg_offs;
++	rb922gs_spi_partitions[1].offset = info->hard_cfg_offs;
++	rb922gs_spi_partitions[3].offset = info->soft_cfg_offs;
++}
++
++static void rb922gs_nand_select_chip(int chip_no)
++{
++	switch (chip_no) {
++	case 0:
++		gpio_set_value(RB922_GPIO_NAND_NCE, 0);
++		break;
++	default:
++		gpio_set_value(RB922_GPIO_NAND_NCE, 1);
++		break;
++	}
++	ndelay(500);
++}
++
++static struct nand_ecclayout rb922gs_nand_ecclayout = {
++	.eccbytes	= 6,
++	.eccpos		= { 8, 9, 10, 13, 14, 15 },
++	.oobavail	= 9,
++	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static int rb922gs_nand_scan_fixup(struct mtd_info *mtd)
++{
++	struct nand_chip *chip = mtd->priv;
++
++	if (mtd->writesize == 512) {
++		/*
++		 * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
++		 * will not be able to find the kernel that we load.
++		 */
++		chip->ecc.layout = &rb922gs_nand_ecclayout;
++	}
++
++	return 0;
++}
++
++static struct mtd_partition rb922gs_nand_partitions[] = {
++	{
++		.name	= "booter",
++		.offset	= 0,
++		.size	= (256 * 1024),
++		.mask_flags = MTD_WRITEABLE,
++	},
++	{
++		.name	= "kernel",
++		.offset	= (256 * 1024),
++		.size	= (4 * 1024 * 1024) - (256 * 1024),
++	},
++	{
++		.name	= "rootfs",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static void __init rb922gs_nand_init(void)
++{
++	gpio_request_one(RB922_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
++
++	ath79_nfc_set_scan_fixup(rb922gs_nand_scan_fixup);
++	ath79_nfc_set_parts(rb922gs_nand_partitions,
++			    ARRAY_SIZE(rb922gs_nand_partitions));
++	ath79_nfc_set_select_chip(rb922gs_nand_select_chip);
++	ath79_nfc_set_swap_dma(true);
++	ath79_register_nfc();
++}
++
++static void __init rb922gs_setup(void)
++{
++	const struct rb_info *info;
++	char buf[64];
++
++	info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
++	if (!info)
++		return;
++
++	scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
++		  (info->board_name) ? info->board_name : "");
++	mips_set_machine_name(buf);
++
++	rb922gs_init_partitions(info);
++	ath79_register_m25p80(&rb922gs_spi_flash_data);
++
++	rb922gs_nand_init();
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	ath79_register_mdio(0, 0x0);
++
++	mdiobus_register_board_info(rb922gs_mdio0_info,
++				    ARRAY_SIZE(rb922gs_mdio0_info));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(RB922_PHY_ADDR);
++	ath79_eth0_pll_data.pll_10 = 0x81001313;
++	ath79_eth0_pll_data.pll_100 = 0x81000101;
++	ath79_eth0_pll_data.pll_1000 = 0x8f000000;
++
++	ath79_register_eth(0);
++
++	ath79_register_pci();
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb922gs_leds), rb922gs_leds);
++	ath79_register_gpio_keys_polled(-1, RB922_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(rb922gs_gpio_keys),
++					rb922gs_gpio_keys);
++
++	/* NOTE:
++	 * This only supports the RB911G-5HPacD board for now. For other boards
++	 * more devices must be registered based on the hardware options which
++	 * can be found in the hardware configuration of RouterBOOT.
++	 */
++}
++
++MIPS_MACHINE_NONAME(ATH79_MACH_RB_922GS, "922gs", rb922gs_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-rb95x.c linux-4.1.13/arch/mips/ath79/mach-rb95x.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-rb95x.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-rb95x.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,258 @@
++/*
++ *  MikroTik RouterBOARD 95X support
++ *
++ *  Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2013 Kamil Trzcinski <ayufan@ayufan.eu>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#define pr_fmt(fmt) "rb95x: " fmt
++
++#include <linux/phy.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/routerboot.h>
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "routerboot.h"
++#include "dev-leds-gpio.h"
++
++#define RB95X_GPIO_NAND_NCE	14
++
++static struct mtd_partition rb95x_nand_partitions[] = {
++	{
++		.name	= "booter",
++		.offset	= 0,
++		.size	= (256 * 1024),
++		.mask_flags = MTD_WRITEABLE,
++	},
++	{
++		.name	= "kernel",
++		.offset	= (256 * 1024),
++		.size	= (4 * 1024 * 1024) - (256 * 1024),
++	},
++	{
++		.name	= "rootfs",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static struct gpio_led rb951ui_leds_gpio[] __initdata = {
++	{
++		.name		= "rb:green:wlan",
++		.gpio		= 11,
++		.active_low	= 1,
++	}, {
++		.name		= "rb:green:act",
++		.gpio		= 3,
++		.active_low	= 1,
++	}, {
++		.name		= "rb:green:port1",
++		.gpio		= 13,
++		.active_low	= 1,
++	}, {
++		.name		= "rb:green:port2",
++		.gpio		= 12,
++		.active_low	= 1,
++	}, {
++		.name		= "rb:green:port3",
++		.gpio		= 4,
++		.active_low	= 1,
++	}, {
++		.name		= "rb:green:port4",
++		.gpio		= 21,
++		.active_low	= 1,
++	}, {
++		.name		= "rb:green:port5",
++		.gpio		= 16,
++		.active_low	= 1,
++	}
++};
++
++static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data rb95x_ar8327_data = {
++	.pad0_cfg = &rb95x_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	}
++};
++
++static struct mdio_board_info rb95x_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &rb95x_ar8327_data,
++	},
++};
++
++void __init rb95x_wlan_init(void)
++{
++	char *art_buf;
++	u8 wlan_mac[ETH_ALEN];
++
++	art_buf = rb_get_wlan_data();
++	if (art_buf == NULL)
++		return;
++
++	ath79_init_mac(wlan_mac, ath79_mac_base, 11);
++	ath79_register_wmac(art_buf + 0x1000, wlan_mac);
++
++	kfree(art_buf);
++}
++
++static void rb95x_nand_select_chip(int chip_no)
++{
++	switch (chip_no) {
++	case 0:
++		gpio_set_value(RB95X_GPIO_NAND_NCE, 0);
++		break;
++	default:
++		gpio_set_value(RB95X_GPIO_NAND_NCE, 1);
++		break;
++	}
++	ndelay(500);
++}
++
++static struct nand_ecclayout rb95x_nand_ecclayout = {
++	.eccbytes	= 6,
++	.eccpos		= { 8, 9, 10, 13, 14, 15 },
++	.oobavail	= 9,
++	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static int rb95x_nand_scan_fixup(struct mtd_info *mtd)
++{
++	struct nand_chip *chip = mtd->priv;
++
++	if (mtd->writesize == 512) {
++		/*
++		 * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
++		 * will not be able to find the kernel that we load.
++		 */
++		chip->ecc.layout = &rb95x_nand_ecclayout;
++	}
++
++	return 0;
++}
++
++void __init rb95x_nand_init(void)
++{
++	gpio_request_one(RB95X_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
++
++	ath79_nfc_set_scan_fixup(rb95x_nand_scan_fixup);
++	ath79_nfc_set_parts(rb95x_nand_partitions,
++			    ARRAY_SIZE(rb95x_nand_partitions));
++	ath79_nfc_set_select_chip(rb95x_nand_select_chip);
++	ath79_nfc_set_swap_dma(true);
++	ath79_register_nfc();
++}
++
++static int __init rb95x_setup(void)
++{
++	const struct rb_info *info;
++
++	info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000);
++	if (!info)
++		return -EINVAL;
++
++	rb95x_nand_init();
++
++	return 0;
++}
++
++static void __init rb951g_setup(void)
++{
++	if (rb95x_setup())
++		return;
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(0, 0x0);
++
++	mdiobus_register_board_info(rb95x_mdio0_info,
++				    ARRAY_SIZE(rb95x_mdio0_info));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++
++	ath79_register_eth(0);
++
++	rb95x_wlan_init();
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
++	     rb951g_setup);
++
++static void __init rb951ui_setup(void)
++{
++	if (rb95x_setup())
++		return;
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++
++	gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++
++	gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "POE power");
++
++	rb95x_wlan_init();
++	ath79_register_usb();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio),
++				 rb951ui_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD",
++	     rb951ui_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-rbsxtlite.c linux-4.1.13/arch/mips/ath79/mach-rbsxtlite.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-rbsxtlite.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-rbsxtlite.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,238 @@
++/*
++ *  MikroTik RouterBOARD SXT Lite support
++ *
++ *  Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2013 Vyacheslav Adamanov <adamanov@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#define pr_fmt(fmt) "sxtlite: " fmt
++
++#include <linux/phy.h>
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/rle.h>
++#include <linux/routerboot.h>
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-eth.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
++#include "dev-wmac.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "routerboot.h"
++#include <linux/ar8216_platform.h>
++
++#define SXTLITE_GPIO_NAND_NCE  14
++#define SXTLITE_GPIO_LED_USER 3
++#define SXTLITE_GPIO_LED_1 13
++#define SXTLITE_GPIO_LED_2 12
++#define SXTLITE_GPIO_LED_3 4
++#define SXTLITE_GPIO_LED_4 21
++#define SXTLITE_GPIO_LED_5 18
++#define SXTLITE_GPIO_LED_POWER 11
++
++#define SXTLITE_GPIO_BUZZER 19
++
++#define SXTLITE_GPIO_BTN_RESET 15
++
++#define SXTLITE_KEYS_POLL_INTERVAL 20
++#define SXTLITE_KEYS_DEBOUNCE_INTERVAL (3 * SXTLITE_KEYS_POLL_INTERVAL)
++
++static struct mtd_partition rbsxtlite_nand_partitions[] = {
++	{
++		.name   = "booter",
++		.offset = 0,
++		.size   = (256 * 1024),
++		.mask_flags = MTD_WRITEABLE,
++	},
++	{
++		.name   = "kernel",
++		.offset = (256 * 1024),
++		.size   = (4 * 1024 * 1024) - (256 * 1024),
++	},
++	{
++		.name   = "rootfs",
++		.offset = MTDPART_OFS_NXTBLK,
++		.size   = MTDPART_SIZ_FULL,
++	},
++};
++
++static struct gpio_led rbsxtlite_leds_gpio[] __initdata = {
++	{
++		.name		=	"rb:green:user",
++		.gpio		=	SXTLITE_GPIO_LED_USER,
++		.active_low	=	1,
++	},
++	{
++		.name		=	"rb:green:led1",
++		.gpio		=	SXTLITE_GPIO_LED_1,
++		.active_low	=	1,
++	},
++	{
++		.name		=	"rb:green:led2",
++		.gpio		=	SXTLITE_GPIO_LED_2,
++		.active_low	=	1,
++	},
++	{
++		.name		=	"rb:green:led3",
++		.gpio		=	SXTLITE_GPIO_LED_3,
++		.active_low	=	1,
++	},
++	{
++		.name		=	"rb:green:led4",
++		.gpio		=	SXTLITE_GPIO_LED_4,
++		.active_low	=	1,
++	},
++	{
++		.name		=	"rb:green:led5",
++		.gpio		=	SXTLITE_GPIO_LED_5,
++		.active_low	=	1,
++	},
++	{
++		.name		=	"rb:green:power",
++		.gpio		=	SXTLITE_GPIO_LED_POWER,
++	},
++};
++
++static struct gpio_keys_button rbsxtlite_gpio_keys[] __initdata = {
++	{
++		.desc		=	"Reset button",
++		.type		=	EV_KEY,
++		.code		=	KEY_RESTART,
++		.debounce_interval	=	SXTLITE_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		=	SXTLITE_GPIO_BTN_RESET,
++		.active_low	=	0,
++	},
++};
++
++static int __init rbsxtlite_rbinfo_init(void)
++{
++	const struct rb_info *info;
++
++	info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000);
++	if (!info)
++		return -EINVAL;
++	return 0;
++
++}
++
++void __init rbsxtlite_wlan_init(void)
++{
++	char *art_buf;
++	u8 wlan_mac[ETH_ALEN];
++
++	art_buf = rb_get_wlan_data();
++	if (art_buf == NULL)
++		return;
++
++	ath79_init_mac(wlan_mac, ath79_mac_base, 1);
++	ath79_register_wmac(art_buf + 0x1000, wlan_mac);
++
++	kfree(art_buf);
++}
++
++static void rbsxtlite_nand_select_chip(int chip_no)
++{
++	switch (chip_no) {
++	case 0:
++		gpio_set_value(SXTLITE_GPIO_NAND_NCE, 0);
++		break;
++	default:
++		gpio_set_value(SXTLITE_GPIO_NAND_NCE, 1);
++		break;
++	}
++	ndelay(500);
++}
++
++static struct nand_ecclayout rbsxtlite_nand_ecclayout = {
++	.eccbytes	= 6,
++	.eccpos	 = { 8, 9, 10, 13, 14, 15 },
++	.oobavail	= 9,
++	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static int rbsxtlite_nand_scan_fixup(struct mtd_info *mtd)
++{
++	struct nand_chip *chip = mtd->priv;
++
++	if (mtd->writesize == 512) {
++		/*
++		* Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
++		* will not be able to find the kernel that we load.
++		*/
++		chip->ecc.layout = &rbsxtlite_nand_ecclayout;
++	}
++
++	return 0;
++}
++
++void __init rbsxtlite_gpio_init(void)
++{
++	gpio_request_one(SXTLITE_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
++}
++
++void __init rbsxtlite_nand_init(void)
++{
++	ath79_nfc_set_scan_fixup(rbsxtlite_nand_scan_fixup);
++	ath79_nfc_set_parts(rbsxtlite_nand_partitions,
++			   ARRAY_SIZE(rbsxtlite_nand_partitions));
++	ath79_nfc_set_select_chip(rbsxtlite_nand_select_chip);
++	ath79_nfc_set_swap_dma(true);
++	ath79_register_nfc();
++}
++
++
++static void __init rbsxtlite_setup(void)
++{
++	if(rbsxtlite_rbinfo_init())
++		return;
++	rbsxtlite_nand_init();
++	rbsxtlite_wlan_init();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(rbsxtlite_leds_gpio),
++				 rbsxtlite_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, SXTLITE_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(rbsxtlite_gpio_keys),
++					rbsxtlite_gpio_keys);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++
++	/* GMAC0 is left unused */
++
++	/* GMAC1 is connected to MAC0 on the internal switch */
++	/* The ethernet port connects to PHY P0, which connects to MAC1
++	   on the internal switch */
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++
++
++}
++
++
++MIPS_MACHINE(ATH79_MACH_RB_SXTLITE2ND, "sxt2n", "Mikrotik RouterBOARD SXT Lite2",
++	    rbsxtlite_setup);
++
++MIPS_MACHINE(ATH79_MACH_RB_SXTLITE5ND, "sxt5n", "Mikrotik RouterBOARD SXT Lite5",
++	    rbsxtlite_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-rw2458n.c linux-4.1.13/arch/mips/ath79/mach-rw2458n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-rw2458n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-rw2458n.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,91 @@
++/*
++ *  Redwave RW2458N support
++ *
++ *  Copyright (C) 2011-2013 Cezary Jackiewicz <cezary@eko.one.pl>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define RW2458N_GPIO_LED_D3	1
++#define RW2458N_GPIO_LED_D4	0
++#define RW2458N_GPIO_LED_D5	11
++#define RW2458N_GPIO_LED_D6	7
++#define RW2458N_GPIO_BTN_RESET	12
++
++#define RW2458N_KEYS_POLL_INTERVAL	20	/* msecs */
++#define RW2458N_KEYS_DEBOUNCE_INTERVAL	(3 * RW2458N_KEYS_POLL_INTERVAL)
++
++static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= RW2458N_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++#define RW2458N_WAN_PHYMASK	BIT(4)
++
++static struct gpio_led rw2458n_leds_gpio[] __initdata = {
++	{
++		.name		= "rw2458n:green:d3",
++		.gpio		= RW2458N_GPIO_LED_D3,
++		.active_low	= 1,
++	}, {
++		.name		= "rw2458n:green:d4",
++		.gpio		= RW2458N_GPIO_LED_D4,
++		.active_low	= 1,
++	}, {
++		.name		= "rw2458n:green:d5",
++		.gpio		= RW2458N_GPIO_LED_D5,
++		.active_low	= 1,
++	}, {
++		.name		= "rw2458n:green:d6",
++		.gpio		= RW2458N_GPIO_LED_D6,
++		.active_low	= 1,
++	}
++};
++
++static void __init rw2458n_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio),
++				 rw2458n_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(rw2458n_gpio_keys),
++					rw2458n_gpio_keys);
++	ath79_register_usb();
++
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N",
++	    rw2458n_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-smart-300.c linux-4.1.13/arch/mips/ath79/mach-smart-300.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-smart-300.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-smart-300.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,135 @@
++/*
++ *  NC-LINK SMART-300 board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ag71xx_platform.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define SMART_300_GPIO_LED_WLAN		13
++#define SMART_300_GPIO_LED_WAN		18
++#define SMART_300_GPIO_LED_LAN4		19
++#define SMART_300_GPIO_LED_LAN3		12
++#define SMART_300_GPIO_LED_LAN2		21
++#define SMART_300_GPIO_LED_LAN1		20
++#define SMART_300_GPIO_LED_SYSTEM	15
++#define SMART_300_GPIO_LED_POWER	14
++
++#define SMART_300_GPIO_BTN_RESET	17
++#define SMART_300_GPIO_SW_RFKILL	16
++
++#define SMART_300_KEYS_POLL_INTERVAL	20	/* msecs */
++#define SMART_300_KEYS_DEBOUNCE_INTERVAL (3 * SMART_300_KEYS_POLL_INTERVAL)
++
++#define SMART_300_GPIO_MASK        0x007fffff
++
++static const char *smart_300_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data smart_300_flash_data = {
++	.part_probes	= smart_300_part_probes,
++};
++
++static struct gpio_led smart_300_leds_gpio[] __initdata = {
++	{
++		.name		= "nc-link:green:lan1",
++		.gpio		= SMART_300_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "nc-link:green:lan2",
++		.gpio		= SMART_300_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}, {
++		.name		= "nc-link:green:lan3",
++		.gpio		= SMART_300_GPIO_LED_LAN3,
++		.active_low	= 1,
++	}, {
++		.name		= "nc-link:green:lan4",
++		.gpio		= SMART_300_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}, {
++		.name		= "nc-link:green:system",
++		.gpio		= SMART_300_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "nc-link:green:wan",
++		.gpio		= SMART_300_GPIO_LED_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "nc-link:green:wlan",
++		.gpio		= SMART_300_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button smart_300_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = SMART_300_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= SMART_300_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static void __init smart_300_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(smart_300_leds_gpio),
++				 smart_300_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, SMART_300_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(smart_300_gpio_keys),
++					smart_300_gpio_keys);
++
++	ath79_register_m25p80(&smart_300_flash_data);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++
++	/* GMAC0 is connected to the PHY0 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, mac);
++
++	gpio_request(SMART_300_GPIO_LED_POWER, "power");
++	gpio_direction_output(SMART_300_GPIO_LED_POWER, GPIOF_OUT_INIT_LOW);
++}
++
++MIPS_MACHINE(ATH79_MACH_SMART_300, "SMART-300", "NC-LINK SMART-300",
++	     smart_300_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tew-632brp.c linux-4.1.13/arch/mips/ath79/mach-tew-632brp.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tew-632brp.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tew-632brp.c	2015-09-13 20:04:35.068524086 +0200
+@@ -0,0 +1,111 @@
++/*
++ *  TrendNET TEW-632BRP board support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "nvram.h"
++
++#define TEW_632BRP_GPIO_LED_STATUS	1
++#define TEW_632BRP_GPIO_LED_WPS		3
++#define TEW_632BRP_GPIO_LED_WLAN	6
++#define TEW_632BRP_GPIO_BTN_WPS		12
++#define TEW_632BRP_GPIO_BTN_RESET	21
++
++#define TEW_632BRP_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL)
++
++#define TEW_632BRP_CONFIG_ADDR	0x1f020000
++#define TEW_632BRP_CONFIG_SIZE	0x10000
++
++static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
++	{
++		.name		= "tew-632brp:green:status",
++		.gpio		= TEW_632BRP_GPIO_LED_STATUS,
++		.active_low	= 1,
++	}, {
++		.name		= "tew-632brp:blue:wps",
++		.gpio		= TEW_632BRP_GPIO_LED_WPS,
++		.active_low	= 1,
++	}, {
++		.name		= "tew-632brp:green:wlan",
++		.gpio		= TEW_632BRP_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TEW_632BRP_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TEW_632BRP_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++#define TEW_632BRP_LAN_PHYMASK	BIT(0)
++#define TEW_632BRP_WAN_PHYMASK	BIT(4)
++#define TEW_632BRP_MDIO_MASK	(~(TEW_632BRP_LAN_PHYMASK | \
++				   TEW_632BRP_WAN_PHYMASK))
++
++static void __init tew_632brp_setup(void)
++{
++	const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR);
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 mac[6];
++	u8 *wlan_mac = NULL;
++
++	if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE,
++				       "lan_mac=", mac) == 0) {
++		ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++		ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++		wlan_mac = mac;
++	}
++
++	ath79_register_mdio(0, TEW_632BRP_MDIO_MASK);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK;
++
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
++				 tew_632brp_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tew_632brp_gpio_keys),
++					tew_632brp_gpio_keys);
++
++	ath79_register_wmac(eeprom, wlan_mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",
++	     tew_632brp_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tew-673gru.c linux-4.1.13/arch/mips/ath79/mach-tew-673gru.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tew-673gru.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tew-673gru.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,198 @@
++/*
++ *  TRENDnet TEW-673GRU board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/rtl8366.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define TEW673GRU_GPIO_LCD_SCK		0
++#define TEW673GRU_GPIO_LCD_MOSI		1
++#define TEW673GRU_GPIO_LCD_MISO		2
++#define TEW673GRU_GPIO_LCD_CS		6
++
++#define TEW673GRU_GPIO_LED_WPS		9
++
++#define TEW673GRU_GPIO_BTN_RESET	3
++#define TEW673GRU_GPIO_BTN_WPS		8
++
++#define TEW673GRU_GPIO_RTL8366_SDA	5
++#define TEW673GRU_GPIO_RTL8366_SCK	7
++
++#define TEW673GRU_KEYS_POLL_INTERVAL	20 /* msecs */
++#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL)
++
++#define TEW673GRU_CAL0_OFFSET		0x1000
++#define TEW673GRU_CAL1_OFFSET		0x5000
++#define TEW673GRU_MAC0_OFFSET		0xffa0
++#define TEW673GRU_MAC1_OFFSET		0xffb4
++
++#define TEW673GRU_CAL_LOCATION_0	0x1f660000
++#define TEW673GRU_CAL_LOCATION_1	0x1f7f0000
++
++static struct gpio_led tew673gru_leds_gpio[] __initdata = {
++	{
++		.name		= "trendnet:blue:wps",
++		.gpio		= TEW673GRU_GPIO_LED_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TEW673GRU_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TEW673GRU_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = {
++	{ .reg = 0x06, .val = 0x0108 },
++};
++
++static struct rtl8366_platform_data tew673gru_rtl8366s_data = {
++	.gpio_sda	= TEW673GRU_GPIO_RTL8366_SDA,
++	.gpio_sck	= TEW673GRU_GPIO_RTL8366_SCK,
++	.num_initvals	= ARRAY_SIZE(tew673gru_rtl8366s_initvals),
++	.initvals	= tew673gru_rtl8366s_initvals,
++};
++
++static struct platform_device tew673gru_rtl8366s_device = {
++	.name		= RTL8366S_DRIVER_NAME,
++	.id		= -1,
++	.dev = {
++		.platform_data	= &tew673gru_rtl8366s_data,
++	}
++};
++
++static struct spi_board_info tew673gru_spi_info[] = {
++	{
++		.bus_num	= 1,
++		.chip_select	= 0,
++		.max_speed_hz	= 400000,
++		.modalias	= "spidev",
++		.mode		= SPI_MODE_2,
++		.controller_data = (void *) TEW673GRU_GPIO_LCD_CS,
++	},
++};
++
++static struct spi_gpio_platform_data tew673gru_spi_data = {
++	.sck		= TEW673GRU_GPIO_LCD_SCK,
++	.miso		= TEW673GRU_GPIO_LCD_MISO,
++	.mosi		= TEW673GRU_GPIO_LCD_MOSI,
++	.num_chipselect = 1,
++};
++
++static struct platform_device tew673gru_spi_device = {
++	.name		= "spi_gpio",
++	.id		= 1,
++	.dev = {
++		.platform_data = &tew673gru_spi_data,
++	},
++};
++
++static bool __init tew673gru_is_caldata_valid(u8 *p)
++{
++	u16 *magic0, *magic1;
++
++	magic0 = (u16 *)(p + TEW673GRU_CAL0_OFFSET);
++	magic1 = (u16 *)(p + TEW673GRU_CAL1_OFFSET);
++
++	return (*magic0 == 0xa55a && *magic1 == 0xa55a);
++}
++
++static void __init tew673gru_wlan_init(void)
++{
++	u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
++	u8 *caldata;
++
++	caldata = (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0);
++	if (!tew673gru_is_caldata_valid(caldata)) {
++		caldata = (u8 *)KSEG1ADDR(TEW673GRU_CAL_LOCATION_1);
++		if (!tew673gru_is_caldata_valid(caldata)) {
++			pr_err("no calibration data found\n");
++			return;
++		}
++	}
++
++	ath79_parse_ascii_mac(caldata + TEW673GRU_MAC0_OFFSET, mac1);
++	ath79_parse_ascii_mac(caldata + TEW673GRU_MAC1_OFFSET, mac2);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
++
++	ap9x_pci_setup_wmac_led_pin(0, 5);
++	ap9x_pci_setup_wmac_led_pin(1, 5);
++
++	ap94_pci_init(caldata + TEW673GRU_CAL0_OFFSET, mac1,
++		      caldata + TEW673GRU_CAL1_OFFSET, mac2);
++}
++
++static void __init tew673gru_setup(void)
++{
++	tew673gru_wlan_init();
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_pll_data.pll_1000 = 0x11110000;
++
++	ath79_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = 0x10;
++	ath79_eth1_pll_data.pll_1000 = 0x11110000;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio),
++				 tew673gru_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tew673gru_gpio_keys),
++					tew673gru_gpio_keys);
++
++	ath79_register_usb();
++
++	platform_device_register(&tew673gru_rtl8366s_device);
++
++	spi_register_board_info(tew673gru_spi_info,
++				ARRAY_SIZE(tew673gru_spi_info));
++	platform_device_register(&tew673gru_spi_device);
++}
++
++MIPS_MACHINE(ATH79_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU",
++	     tew673gru_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tew-712br.c linux-4.1.13/arch/mips/ath79/mach-tew-712br.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tew-712br.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tew-712br.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,153 @@
++/*
++ *  TRENDnet TEW-712BR board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TEW_712BR_GPIO_BTN_WPS		11
++#define TEW_712BR_GPIO_BTN_RESET	12
++
++#define TEW_712BR_GPIO_LED_LAN1		13
++#define TEW_712BR_GPIO_LED_LAN2		14
++#define TEW_712BR_GPIO_LED_LAN3		15
++#define TEW_712BR_GPIO_LED_LAN4		16
++#define TEW_712BR_GPIO_LED_POWER_GREEN	20
++#define TEW_712BR_GPIO_LED_POWER_ORANGE	27
++#define TEW_712BR_GPIO_LED_WAN_GREEN	17
++#define TEW_712BR_GPIO_LED_WAN_ORANGE	23
++#define TEW_712BR_GPIO_LED_WLAN		0
++#define TEW_712BR_GPIO_LED_WPS		26
++
++#define TEW_712BR_GPIO_WAN_LED_ENABLE	1
++
++#define TEW_712BR_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TEW_712BR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_712BR_KEYS_POLL_INTERVAL)
++
++#define TEW_712BR_ART_ADDRESS		0x1f010000
++#define TEW_712BR_CALDATA_OFFSET	0x1000
++
++#define TEW_712BR_MAC_PART_ADDRESS	0x1f020000
++#define TEW_712BR_LAN_MAC_OFFSET	0x04
++#define TEW_712BR_WAN_MAC_OFFSET	0x16
++
++static struct gpio_led tew_712br_leds_gpio[] __initdata = {
++	{
++		.name		= "trendnet:green:lan1",
++		.gpio		= TEW_712BR_GPIO_LED_LAN1,
++		.active_low	= 0,
++	}, {
++		.name		= "trendnet:green:lan2",
++		.gpio		= TEW_712BR_GPIO_LED_LAN2,
++		.active_low	= 0,
++	}, {
++		.name		= "trendnet:green:lan3",
++		.gpio		= TEW_712BR_GPIO_LED_LAN3,
++		.active_low	= 0,
++	}, {
++		.name		= "trendnet:green:lan4",
++		.gpio		= TEW_712BR_GPIO_LED_LAN4,
++		.active_low	= 0,
++	}, {
++		.name		= "trendnet:blue:wps",
++		.gpio		= TEW_712BR_GPIO_LED_WPS,
++		.active_low	= 1,
++	}, {
++		.name		= "trendnet:green:power",
++		.gpio		= TEW_712BR_GPIO_LED_POWER_GREEN,
++		.active_low	= 0,
++	}, {
++		.name		= "trendnet:orange:power",
++		.gpio		= TEW_712BR_GPIO_LED_POWER_ORANGE,
++		.active_low	= 0,
++	}, {
++		.name		= "trendnet:green:wan",
++		.gpio		= TEW_712BR_GPIO_LED_WAN_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "trendnet:orange:wan",
++		.gpio		= TEW_712BR_GPIO_LED_WAN_ORANGE,
++		.active_low	= 0,
++	}, {
++		.name		= "trendnet:green:wlan",
++		.gpio		= TEW_712BR_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button tew_712br_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TEW_712BR_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TEW_712BR_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static void __init tew_712br_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(TEW_712BR_ART_ADDRESS);
++	u8 *mac = (u8 *) KSEG1ADDR(TEW_712BR_MAC_PART_ADDRESS);
++	u8 lan_mac[ETH_ALEN];
++	u8 wan_mac[ETH_ALEN];
++
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	gpio_request_one(TEW_712BR_GPIO_WAN_LED_ENABLE,
++			 GPIOF_OUT_INIT_LOW, "WAN LED enable");
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_712br_leds_gpio),
++				 tew_712br_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, TEW_712BR_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tew_712br_gpio_keys),
++					tew_712br_gpio_keys);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_parse_ascii_mac(mac + TEW_712BR_LAN_MAC_OFFSET, lan_mac);
++	ath79_parse_ascii_mac(mac + TEW_712BR_WAN_MAC_OFFSET, wan_mac);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(art + TEW_712BR_CALDATA_OFFSET, wan_mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TEW_712BR, "TEW-712BR",
++	     "TRENDnet TEW-712BR", tew_712br_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tew-732br.c linux-4.1.13/arch/mips/ath79/mach-tew-732br.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tew-732br.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tew-732br.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,127 @@
++/*
++ *  TRENDnet TEW-732BR board support
++ *
++ *  Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TEW_732BR_GPIO_BTN_WPS		16
++#define TEW_732BR_GPIO_BTN_RESET	17
++
++#define TEW_732BR_GPIO_LED_POWER_GREEN	4
++#define TEW_732BR_GPIO_LED_POWER_AMBER	14
++#define TEW_732BR_GPIO_LED_PLANET_GREEN	12
++#define TEW_732BR_GPIO_LED_PLANET_AMBER 22
++
++#define TEW_732BR_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TEW_732BR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_732BR_KEYS_POLL_INTERVAL)
++
++#define TEW_732BR_ART_ADDRESS		0x1fff0000
++#define TEW_732BR_CALDATA_OFFSET	0x1000
++#define TEW_732BR_LAN_MAC_OFFSET	0xffa0
++#define TEW_732BR_WAN_MAC_OFFSET	0xffb4
++
++static struct gpio_led tew_732br_leds_gpio[] __initdata = {
++	{
++		.name		= "trendnet:green:power",
++		.gpio		= TEW_732BR_GPIO_LED_POWER_GREEN,
++		.active_low	= 0,
++	},
++	{
++		.name		= "trendnet:amber:power",
++		.gpio		= TEW_732BR_GPIO_LED_POWER_AMBER,
++		.active_low	= 0,
++	},
++	{
++		.name		= "trendnet:green:wan",
++		.gpio		= TEW_732BR_GPIO_LED_PLANET_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "trendnet:amber:wan",
++		.gpio		= TEW_732BR_GPIO_LED_PLANET_AMBER,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button tew_732br_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TEW_732BR_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TEW_732BR_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TEW_732BR_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TEW_732BR_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++};
++
++static void __init tew_732br_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(TEW_732BR_ART_ADDRESS);
++	u8 lan_mac[ETH_ALEN];
++	u8 wan_mac[ETH_ALEN];
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_732br_leds_gpio),
++				 tew_732br_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, TEW_732BR_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tew_732br_gpio_keys),
++					tew_732br_gpio_keys);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_parse_ascii_mac(art + TEW_732BR_LAN_MAC_OFFSET, lan_mac);
++	ath79_parse_ascii_mac(art + TEW_732BR_WAN_MAC_OFFSET, wan_mac);
++
++	ath79_register_wmac(art + TEW_732BR_CALDATA_OFFSET, lan_mac);
++
++	ath79_register_mdio(1, 0x0);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	/* LAN: GMAC1 is connected to the internal switch */
++	ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++
++	ath79_register_eth(1);
++
++	/* WAN: GMAC0 is connected to the PHY4 of the internal switch */
++	ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
++
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_TEW_732BR, "TEW-732BR", "TRENDnet TEW-732BR",
++	     tew_732br_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-mr11u.c linux-4.1.13/arch/mips/ath79/mach-tl-mr11u.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-mr11u.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-mr11u.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,183 @@
++/*
++ *  TP-LINK TL-MR11U/TL-MR3040 board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_MR11U_GPIO_LED_3G		27
++#define TL_MR11U_GPIO_LED_WLAN		26
++#define TL_MR11U_GPIO_LED_LAN		17
++
++#define TL_MR11U_GPIO_BTN_WPS		20
++#define TL_MR11U_GPIO_BTN_RESET		11
++
++#define TL_MR11U_GPIO_USB_POWER		8
++#define TL_MR3040_GPIO_USB_POWER	18
++
++#define TL_MR3040_V2_GPIO_BTN_SW1	19
++#define TL_MR3040_V2_GPIO_BTN_SW2	20
++
++#define TL_MR11U_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL	(3 * TL_MR11U_KEYS_POLL_INTERVAL)
++
++static const char *tl_mr11u_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_mr11u_flash_data = {
++	.part_probes	= tl_mr11u_part_probes,
++};
++
++static struct gpio_led tl_mr11u_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:3g",
++		.gpio		= TL_MR11U_GPIO_LED_3G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_MR11U_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:lan",
++		.gpio		= TL_MR11U_GPIO_LED_LAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR11U_GPIO_BTN_RESET,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR11U_GPIO_BTN_WPS,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button tl_mr3040_v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR11U_GPIO_BTN_RESET,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "sw1",
++		.type		= EV_SW,
++		.code		= BTN_0,
++		.debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR3040_V2_GPIO_BTN_SW1,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "sw2",
++		.type		= EV_SW,
++		.code		= BTN_1,
++		.debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR3040_V2_GPIO_BTN_SW2,
++		.active_low	= 0,
++	}
++};
++
++static void __init common_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* Disable hardware control LAN1 and LAN2 LEDs, enabling GPIO14 and GPIO15 */
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_m25p80(&tl_mr11u_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio),
++				 tl_mr11u_leds_gpio);
++
++	ath79_register_usb();
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, mac);
++}
++
++static void __init tl_mr11u_setup(void)
++{
++	common_setup();
++
++	ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_mr11u_gpio_keys),
++					tl_mr11u_gpio_keys);
++	gpio_request_one(TL_MR11U_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U",
++	     tl_mr11u_setup);
++
++static void __init tl_mr3040_setup(void)
++{
++	common_setup();
++
++	ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
++					1, tl_mr11u_gpio_keys);
++	gpio_request_one(TL_MR3040_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR3040, "TL-MR3040", "TP-LINK TL-MR3040",
++	     tl_mr3040_setup);
++
++static void __init tl_mr3040_v2_setup(void)
++{
++	common_setup();
++
++	ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_mr3040_v2_gpio_keys),
++					tl_mr3040_v2_gpio_keys);
++	gpio_request_one(TL_MR3040_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR3040_V2, "TL-MR3040-v2", "TP-LINK TL-MR3040 v2",
++	     tl_mr3040_v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-mr13u.c linux-4.1.13/arch/mips/ath79/mach-tl-mr13u.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-mr13u.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-mr13u.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,107 @@
++/*
++ *  TP-LINK TL-MR13U board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_MR13U_GPIO_LED_SYSTEM	27
++
++#define TL_MR13U_GPIO_BTN_RESET		11
++#define TL_MR13U_GPIO_BTN_SW1		6
++#define TL_MR13U_GPIO_BTN_SW2		7
++
++#define TL_MR13U_GPIO_USB_POWER		18
++
++#define TL_MR13U_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_MR13U_KEYS_DEBOUNCE_INTERVAL	(3 * TL_MR13U_KEYS_POLL_INTERVAL)
++
++static const char *tl_mr13u_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_mr13u_flash_data = {
++	.part_probes	= tl_mr13u_part_probes,
++};
++
++static struct gpio_led tl_mr13u_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:blue:system",
++		.gpio		= TL_MR13U_GPIO_LED_SYSTEM,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button tl_mr13u_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR13U_GPIO_BTN_RESET,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "sw1",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR13U_GPIO_BTN_SW1,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "sw2",
++		.type		= EV_KEY,
++		.code		= BTN_1,
++		.debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR13U_GPIO_BTN_SW2,
++		.active_low	= 0,
++	},
++};
++
++static void __init tl_mr13u_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_m25p80(&tl_mr13u_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr13u_leds_gpio),
++				 tl_mr13u_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, TL_MR13U_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_mr13u_gpio_keys),
++					tl_mr13u_gpio_keys);
++
++	gpio_request_one(TL_MR13U_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR13U, "TL-MR13U", "TP-LINK TL-MR13U v1",
++	     tl_mr13u_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-mr3020.c linux-4.1.13/arch/mips/ath79/mach-tl-mr3020.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-mr3020.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-mr3020.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,126 @@
++/*
++ *  TP-LINK TL-MR3020 board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_MR3020_GPIO_LED_3G		27
++#define TL_MR3020_GPIO_LED_WLAN		0
++#define TL_MR3020_GPIO_LED_LAN		17
++#define TL_MR3020_GPIO_LED_WPS		26
++
++#define TL_MR3020_GPIO_BTN_WPS		11
++#define TL_MR3020_GPIO_BTN_SW1		18
++#define TL_MR3020_GPIO_BTN_SW2		20
++
++#define TL_MR3020_GPIO_USB_POWER	8
++
++#define TL_MR3020_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL	(3 * TL_MR3020_KEYS_POLL_INTERVAL)
++
++static const char *tl_mr3020_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_mr3020_flash_data = {
++	.part_probes	= tl_mr3020_part_probes,
++};
++
++static struct gpio_led tl_mr3020_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:3g",
++		.gpio		= TL_MR3020_GPIO_LED_3G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_MR3020_GPIO_LED_WLAN,
++		.active_low	= 0,
++	},
++	{
++		.name		= "tp-link:green:lan",
++		.gpio		= TL_MR3020_GPIO_LED_LAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:wps",
++		.gpio		= TL_MR3020_GPIO_LED_WPS,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = {
++	{
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR3020_GPIO_BTN_WPS,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "sw1",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR3020_GPIO_BTN_SW1,
++		.active_low	= 0,
++	},
++	{
++		.desc		= "sw2",
++		.type		= EV_KEY,
++		.code		= BTN_1,
++		.debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR3020_GPIO_BTN_SW2,
++		.active_low	= 0,
++	}
++};
++
++static void __init tl_mr3020_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_m25p80(&tl_mr3020_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio),
++				 tl_mr3020_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_mr3020_gpio_keys),
++					tl_mr3020_gpio_keys);
++
++	gpio_request_one(TL_MR3020_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020",
++	     tl_mr3020_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-mr3x20.c linux-4.1.13/arch/mips/ath79/mach-tl-mr3x20.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-mr3x20.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-mr3x20.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,147 @@
++/*
++ *  TP-LINK TL-MR3220/3420 board support
++ *
++ *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define TL_MR3X20_GPIO_LED_QSS		0
++#define TL_MR3X20_GPIO_LED_SYSTEM	1
++#define TL_MR3X20_GPIO_LED_3G		8
++
++#define TL_MR3X20_GPIO_BTN_RESET	11
++#define TL_MR3X20_GPIO_BTN_QSS		12
++
++#define TL_MR3X20_GPIO_USB_POWER	6
++
++#define TL_MR3X20_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL)
++
++static const char *tl_mr3x20_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_mr3x20_flash_data = {
++	.part_probes	= tl_mr3x20_part_probes,
++};
++
++static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:system",
++		.gpio		= TL_MR3X20_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_MR3X20_GPIO_LED_QSS,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:3g",
++		.gpio		= TL_MR3X20_GPIO_LED_3G,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR3X20_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "qss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR3X20_GPIO_BTN_QSS,
++		.active_low	= 1,
++	}
++};
++
++static void __init tl_ap99_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(&tl_mr3x20_flash_data);
++
++	ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(tl_mr3x20_gpio_keys),
++					 tl_mr3x20_gpio_keys);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++	/* WAN port */
++	ath79_register_eth(0);
++
++	ap91_pci_init(ee, mac);
++}
++
++static void __init tl_mr3x20_usb_setup(void)
++{
++	/* enable power for the USB port */
++	gpio_request_one(TL_MR3X20_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++}
++
++static void __init tl_mr3220_setup(void)
++{
++	tl_ap99_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
++				 tl_mr3x20_leds_gpio);
++	ap9x_pci_setup_wmac_led_pin(0, 1);
++	tl_mr3x20_usb_setup();
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220",
++	     tl_mr3220_setup);
++
++static void __init tl_mr3420_setup(void)
++{
++	tl_ap99_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
++				 tl_mr3x20_leds_gpio);
++	ap9x_pci_setup_wmac_led_pin(0, 0);
++	tl_mr3x20_usb_setup();
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
++	     tl_mr3420_setup);
++
++static void __init tl_wr841n_v7_setup(void)
++{
++	tl_ap99_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1,
++				 tl_mr3x20_leds_gpio);
++	ap9x_pci_setup_wmac_led_pin(0, 0);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7",
++	     "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa701nd-v2.c linux-4.1.13/arch/mips/ath79/mach-tl-wa701nd-v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa701nd-v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wa701nd-v2.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,116 @@
++/*
++ *  TP-LINK TL-WA701ND v2 board support
++ *
++ *  Copyright (C) 2015 Luigi Tarenga <luigi.tarenga@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WA701NDV2_GPIO_LED_WLAN	0
++#define TL_WA701NDV2_GPIO_LED_QSS	1
++#define TL_WA701NDV2_GPIO_LED_LAN	17
++#define TL_WA701NDV2_GPIO_LED_SYSTEM	27
++
++#define TL_WA701NDV2_GPIO_BTN_RESET	11
++#define TL_WA701NDV2_GPIO_BTN_QSS	26
++
++#define TL_WA701NDV2_GPIO_USB_POWER	8
++
++#define TL_WA701NDV2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WA701NDV2_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WA701NDV2_KEYS_POLL_INTERVAL)
++
++static const char *tl_wa701ndv2_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wa701ndv2_flash_data = {
++	.part_probes	= tl_wa701ndv2_part_probes,
++};
++
++static struct gpio_led tl_wa701ndv2_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WA701NDV2_GPIO_LED_WLAN,
++		.active_low	= 0,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WA701NDV2_GPIO_LED_QSS,
++		.active_low	= 0,
++	}, {
++		.name		= "tp-link:green:lan",
++		.gpio		= TL_WA701NDV2_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WA701NDV2_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++        }
++};
++
++static struct gpio_keys_button tl_wa701ndv2_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WA701NDV2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WA701NDV2_GPIO_BTN_RESET,
++		.active_low	= 0,
++	} , {
++                .desc		= "qss",
++                .type		= EV_KEY,
++                .code		= KEY_WPS_BUTTON,
++                .debounce_interval = TL_WA701NDV2_KEYS_DEBOUNCE_INTERVAL,
++                .gpio		= TL_WA701NDV2_GPIO_BTN_QSS,
++                .active_low	= 0,
++        }
++
++};
++
++static void __init tl_wa701ndv2_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa701ndv2_leds_gpio),
++				 tl_wa701ndv2_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WA701NDV2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wa701ndv2_gpio_keys),
++					tl_wa701ndv2_gpio_keys);
++
++	gpio_request_one(TL_WA701NDV2_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_register_m25p80(&tl_wa701ndv2_flash_data);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	/* ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); */
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA701ND_V2, "TL-WA701ND-v2",
++	     "TP-LINK TL-WA701ND v2", tl_wa701ndv2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa7210n-v2.c linux-4.1.13/arch/mips/ath79/mach-tl-wa7210n-v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa7210n-v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wa7210n-v2.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,125 @@
++/*
++ *  TP-LINK TL-WA7210N v2.1 board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2014 Nicolas Braud-Santoni <nicolas@braud-santoni.eu>
++ *  Copyright (C) 2014 Alexander List <alex@graz.funkfeuer.at>
++ *  Copyright (C) 2015 Hendrik Frenzel <hfrenzel@scunc.net>
++ *
++ *  rebased on TL-WA7510Nv1 support,
++ *    Copyright (C) 2012 Stefan Helmert <helst_listen@aol.de>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-dsa.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#include "common.h"
++
++#define TL_WA7210N_V2_GPIO_BTN_RESET    11
++#define TL_WA7210N_V2_KEYS_POLL_INT     20
++#define TL_WA7210N_V2_KEYS_DEBOUNCE_INT (3 * TL_WA7210N_V2_KEYS_POLL_INT)
++
++#define TL_WA7210N_V2_GPIO_LED_LAN  17
++#define TL_WA7210N_V2_GPIO_LED_SIG1 0
++#define TL_WA7210N_V2_GPIO_LED_SIG2 1
++#define TL_WA7210N_V2_GPIO_LED_SIG3 27
++#define TL_WA7210N_V2_GPIO_LED_SIG4 26
++
++#define  TL_WA7210N_V2_GPIO_LNA_EN 28
++
++static const char *tl_wa7210n_v2_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct gpio_keys_button tl_wa7210n_v2_gpio_keys[] __initdata = {
++	{
++		.desc              = "reset",
++		.type              = EV_KEY,
++		.code              = KEY_RESTART,
++		.debounce_interval = TL_WA7210N_V2_KEYS_DEBOUNCE_INT,
++		.gpio              = TL_WA7210N_V2_GPIO_BTN_RESET,
++		.active_low        = 0,
++	},
++};
++
++static struct gpio_led tl_wa7210n_v2_leds_gpio[] __initdata = {
++	{
++		.name       = "tp-link:green:lan",
++		.gpio       = TL_WA7210N_V2_GPIO_LED_LAN,
++		.active_low = 1,
++	}, {
++		.name       = "tp-link:green:signal1",
++		.gpio       = TL_WA7210N_V2_GPIO_LED_SIG1,
++		.active_low = 0,
++	}, {
++		.name       = "tp-link:green:signal2",
++		.gpio       = TL_WA7210N_V2_GPIO_LED_SIG2,
++		.active_low = 0,
++	}, {
++		.name       = "tp-link:green:signal3",
++		.gpio       = TL_WA7210N_V2_GPIO_LED_SIG3,
++		.active_low = 1,
++	}, {
++		.name       = "tp-link:green:signal4",
++		.gpio       = TL_WA7210N_V2_GPIO_LED_SIG4,
++		.active_low = 1,
++	},
++};
++
++static struct flash_platform_data tl_wa7210n_v2_flash_data = {
++	.part_probes    = tl_wa7210n_v2_part_probes,
++};
++
++static void __init tl_wa7210n_v2_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_gpio_keys_polled(-1, TL_WA7210N_V2_KEYS_POLL_INT,
++			ARRAY_SIZE(tl_wa7210n_v2_gpio_keys),
++			tl_wa7210n_v2_gpio_keys);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa7210n_v2_leds_gpio),
++			tl_wa7210n_v2_leds_gpio);
++
++	ath79_gpio_function_enable(TL_WA7210N_V2_GPIO_LNA_EN);
++
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_wmac(ee, mac);
++
++	ath79_register_m25p80(&tl_wa7210n_v2_flash_data);
++
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA7210N_V2, "TL-WA7210N-v2", "TP-LINK TL-WA7210N v2",
++	tl_wa7210n_v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa830re-v2.c linux-4.1.13/arch/mips/ath79/mach-tl-wa830re-v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa830re-v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wa830re-v2.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,132 @@
++/*
++ *  TP-LINK TL-WA830RE v2 board support
++ *
++ *  Copyright (C) 2014 Fredrik Jonson <fredrik@famjonson.se>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WA830REV2_GPIO_LED_WLAN	13
++#define TL_WA830REV2_GPIO_LED_QSS	15
++#define TL_WA830REV2_GPIO_LED_LAN	18
++#define TL_WA830REV2_GPIO_LED_SYSTEM	14
++
++#define TL_WA830REV2_GPIO_BTN_RESET	17
++#define TL_WA830REV2_GPIO_SW_RFKILL	16	/* WPS for MR3420 v2 */
++
++#define TL_WA830REV2_GPIO_USB_POWER	4
++
++#define TL_WA830REV2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA830REV2_KEYS_POLL_INTERVAL)
++
++static const char *tl_wa830re_v2_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wa830re_v2_flash_data = {
++	.part_probes	= tl_wa830re_v2_part_probes,
++};
++
++static struct gpio_led tl_wa830re_v2_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WA830REV2_GPIO_LED_QSS,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WA830REV2_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan",
++		.gpio		= TL_WA830REV2_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WA830REV2_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_wa830re_v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WA830REV2_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "RFKILL switch",
++		.type		= EV_SW,
++		.code		= KEY_RFKILL,
++		.debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WA830REV2_GPIO_SW_RFKILL,
++		.active_low	= 0,
++	}
++};
++
++static void __init tl_ap123_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* Disable JTAG, enabling GPIOs 0-3 */
++	/* Configure OBS4 line, for GPIO 4*/
++	ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
++				 AR934X_GPIO_FUNC_CLK_OBS4_EN);
++
++	/* config gpio4 as normal gpio function */
++	ath79_gpio_output_select(TL_WA830REV2_GPIO_USB_POWER,
++				 AR934X_GPIO_OUT_GPIO);
++
++	ath79_register_m25p80(&tl_wa830re_v2_flash_data);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
++
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++
++	/* GMAC0 is connected to the PHY0 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, mac);
++}
++
++static void __init tl_wa830re_v2_setup(void)
++{
++	tl_ap123_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa830re_v2_leds_gpio) - 1,
++				 tl_wa830re_v2_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, TL_WA830REV2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wa830re_v2_gpio_keys),
++					tl_wa830re_v2_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA830RE_V2, "TL-WA830RE-v2", "TP-LINK TL-WA830RE v2",
++	     tl_wa830re_v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa901nd.c linux-4.1.13/arch/mips/ath79/mach-tl-wa901nd.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa901nd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wa901nd.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,127 @@
++/*
++ *  TP-LINK TL-WA901N/ND v1, TL-WA7510N v1 board support
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
++ *  Copyright (C) 2012 Stefan Helmert <helst_listen@aol.de>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define TL_WA901ND_GPIO_LED_QSS		0
++#define TL_WA901ND_GPIO_LED_SYSTEM	1
++#define TL_WA901ND_GPIO_LED_LAN		13
++
++#define TL_WA901ND_GPIO_BTN_RESET	11
++#define TL_WA901ND_GPIO_BTN_QSS		12
++
++#define TL_WA901ND_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
++
++static const char *tl_wa901nd_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wa901nd_flash_data = {
++	.part_probes	= tl_wa901nd_part_probes,
++};
++
++static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan",
++		.gpio		= TL_WA901ND_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WA901ND_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WA901ND_GPIO_LED_QSS,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WA901ND_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "qss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WA901ND_GPIO_BTN_QSS,
++		.active_low	= 1,
++	}
++};
++
++static void __init common_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++
++	/*
++	 * ath79_eth0 would be the WAN port, but is not connected.
++	 * ath79_eth1 connects to the internal switch chip, however
++	 * we have a single LAN port only.
++	 */
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(&tl_wa901nd_flash_data);
++}
++
++static void __init tl_wa901nd_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee  = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	common_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
++				 tl_wa901nd_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wa901nd_gpio_keys),
++					tl_wa901nd_gpio_keys);
++
++	ap91_pci_init(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
++	     tl_wa901nd_setup);
++
++static void __init tl_wa7510n_v1_setup(void)
++{
++	common_setup();
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA7510N_V1, "TL-WA7510N", "TP-LINK TL-WA7510N v1",
++	     tl_wa7510n_v1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa901nd-v2.c linux-4.1.13/arch/mips/ath79/mach-tl-wa901nd-v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wa901nd-v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wa901nd-v2.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,104 @@
++/*
++ *  TP-LINK TL-WA901N/ND v2 board support
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
++ *  Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "dev-eth.h"
++#include "dev-m25p80.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WA901ND_V2_GPIO_LED_QSS		4
++#define TL_WA901ND_V2_GPIO_LED_SYSTEM		2
++#define TL_WA901ND_V2_GPIO_LED_WLAN		9
++
++#define TL_WA901ND_V2_GPIO_BTN_RESET		3
++#define TL_WA901ND_V2_GPIO_BTN_QSS		7
++
++#define TL_WA901ND_V2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL	\
++					(3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL)
++
++static const char *tl_wa901nd_v2_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wa901nd_v2_flash_data = {
++	.part_probes	= tl_wa901nd_v2_part_probes,
++};
++
++static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WA901ND_V2_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WA901ND_V2_GPIO_LED_QSS,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WA901ND_V2_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WA901ND_V2_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "qss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WA901ND_V2_GPIO_BTN_QSS,
++		.active_low	= 1,
++	}
++};
++
++static void __init tl_wa901nd_v2_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *eeprom  = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = 0x00001000;
++	ath79_register_mdio(0, 0x0);
++
++	ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
++				    AR71XX_RESET_GE0_PHY;
++	ath79_register_eth(0);
++
++	ath79_register_m25p80(&tl_wa901nd_v2_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio),
++				 tl_wa901nd_v2_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wa901nd_v2_gpio_keys),
++					tl_wa901nd_v2_gpio_keys);
++
++	ath79_register_wmac(eeprom, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2",
++	     "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wax50re.c linux-4.1.13/arch/mips/ath79/mach-tl-wax50re.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wax50re.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wax50re.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,313 @@
++/*
++ *  TP-LINK TL-WA750RE v1/TL-WA801ND v2/TL-WA850RE v1/TL-WA901ND v3
++ *  board support
++ *
++ *  Copyright (C) 2013 Martijn Zilverschoon <thefriedzombie@gmail.com>
++ *  Copyright (C) 2013 Jiri Pirko <jiri@resnulli.us>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WAX50RE_GPIO_LED_LAN		20
++#define TL_WAX50RE_GPIO_LED_WLAN	13
++#define TL_WAX50RE_GPIO_LED_RE		15
++#define TL_WAX50RE_GPIO_LED_SIGNAL1	0
++#define TL_WAX50RE_GPIO_LED_SIGNAL2	1
++#define TL_WAX50RE_GPIO_LED_SIGNAL3	2
++#define TL_WAX50RE_GPIO_LED_SIGNAL4	3
++#define TL_WAX50RE_GPIO_LED_SIGNAL5	4
++
++#define TL_WA860RE_GPIO_LED_WLAN_ORANGE	0
++#define TL_WA860RE_GPIO_LED_WLAN_GREEN	2
++#define TL_WA860RE_GPIO_LED_POWER_ORANGE	12
++#define TL_WA860RE_GPIO_LED_POWER_GREEN	14
++#define TL_WA860RE_GPIO_LED_LAN		20
++
++#define TL_WA801ND_V2_GPIO_LED_LAN	18
++#define TL_WA801ND_V2_GPIO_LED_SYSTEM	14
++
++#define TL_WAX50RE_GPIO_BTN_RESET	17
++#define TL_WAX50RE_GPIO_BTN_WPS		16
++
++#define TL_WA860RE_GPIO_BTN_RESET	17
++#define TL_WA860RE_GPIO_BTN_WPS		16
++#define TL_WA860RE_GPIO_BTN_ONOFF	11
++
++#define TL_WAX50RE_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL (3 * TL_WAX50RE_KEYS_POLL_INTERVAL)
++
++static const char *tl_wax50re_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wax50re_flash_data = {
++	.part_probes	= tl_wax50re_part_probes,
++};
++
++static struct gpio_led tl_wa750re_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:orange:lan",
++		.gpio		= TL_WAX50RE_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:orange:wlan",
++		.gpio		= TL_WAX50RE_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:orange:re",
++		.gpio		= TL_WAX50RE_GPIO_LED_RE,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:orange:signal1",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:orange:signal2",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL2,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:orange:signal3",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL3,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:orange:signal4",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL4,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:orange:signal5",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL5,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_led tl_wa850re_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:blue:lan",
++		.gpio		= TL_WAX50RE_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:wlan",
++		.gpio		= TL_WAX50RE_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:re",
++		.gpio		= TL_WAX50RE_GPIO_LED_RE,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal1",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal2",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL2,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal3",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL3,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal4",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL4,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal5",
++		.gpio		= TL_WAX50RE_GPIO_LED_SIGNAL5,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_led tl_wa860re_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan",
++		.gpio		= TL_WA860RE_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:power",
++		.gpio		= TL_WA860RE_GPIO_LED_POWER_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:orange:power",
++		.gpio		= TL_WA860RE_GPIO_LED_POWER_ORANGE,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WA860RE_GPIO_LED_WLAN_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:orange:wlan",
++		.gpio		= TL_WA860RE_GPIO_LED_WLAN_ORANGE,
++		.active_low	= 1,
++	},
++};
++
++
++static struct gpio_keys_button tl_wax50re_gpio_keys[] __initdata = {
++	{
++		.desc		   = "Reset button",
++		.type		   = EV_KEY,
++		.code		   = KEY_RESTART,
++		.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		   = TL_WAX50RE_GPIO_BTN_RESET,
++		.active_low	   = 1,
++	}, {
++		.desc		   = "WPS",
++		.type		   = EV_KEY,
++		.code		   = KEY_WPS_BUTTON,
++		.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		   = TL_WAX50RE_GPIO_BTN_WPS,
++		.active_low	   = 1,
++	},
++};
++
++static struct gpio_keys_button tl_wa860re_gpio_keys[] __initdata = {
++	{
++		.desc		   = "Reset button",
++		.type		   = EV_KEY,
++		.code		   = KEY_RESTART,
++		.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		   = TL_WA860RE_GPIO_BTN_RESET,
++		.active_low	   = 1,
++	}, {
++		.desc		   = "WPS",
++		.type		   = EV_KEY,
++		.code		   = KEY_WPS_BUTTON,
++		.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		   = TL_WA860RE_GPIO_BTN_WPS,
++		.active_low	   = 1,
++	}, {
++		.desc		   = "ONOFF",
++		.type		   = EV_KEY,
++		.code		   = BTN_1,
++		.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		   = TL_WA860RE_GPIO_BTN_ONOFF,
++		.active_low	   = 1,
++	},
++};
++
++static struct gpio_led tl_wa801nd_v2_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan",
++		.gpio		= TL_WA801ND_V2_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WAX50RE_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WAX50RE_GPIO_LED_RE,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WA801ND_V2_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++};
++
++static void __init tl_ap123_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(&tl_wax50re_flash_data);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
++
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, mac);
++}
++
++static void  __init tl_wa750re_setup(void)
++{
++	tl_ap123_setup();
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa750re_leds_gpio),
++				 tl_wa750re_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wax50re_gpio_keys),
++					tl_wax50re_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA750RE, "TL-WA750RE", "TP-LINK TL-WA750RE",
++	     tl_wa750re_setup);
++
++static void __init tl_wa801nd_v2_setup(void)
++{
++	tl_ap123_setup();
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio),
++			tl_wa801nd_v2_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wax50re_gpio_keys),
++					tl_wax50re_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA801ND_V2, "TL-WA801ND-v2", "TP-LINK TL-WA801ND v2",
++	     tl_wa801nd_v2_setup);
++
++static void  __init tl_wa850re_setup(void)
++{
++	tl_ap123_setup();
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_leds_gpio),
++				 tl_wa850re_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wax50re_gpio_keys),
++					tl_wax50re_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA850RE, "TL-WA850RE", "TP-LINK TL-WA850RE",
++	     tl_wa850re_setup);
++
++static void  __init tl_wa860re_setup(void)
++{
++	tl_ap123_setup();
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa860re_leds_gpio),
++				 tl_wa860re_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wa860re_gpio_keys),
++					tl_wa860re_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA860RE, "TL-WA860RE", "TP-LINK TL-WA860RE",
++	     tl_wa860re_setup);
++
++static void __init tl_wa901nd_v3_setup(void)
++{
++	tl_ap123_setup();
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio),
++			tl_wa801nd_v2_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wax50re_gpio_keys) - 1,
++					tl_wax50re_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V3, "TL-WA901ND-v3", "TP-LINK TL-WA901ND v3",
++	     tl_wa901nd_v3_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wdr3320-v2.c linux-4.1.13/arch/mips/ath79/mach-tl-wdr3320-v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wdr3320-v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wdr3320-v2.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,146 @@
++/*
++ *  TP-LINK TL-WDR3320 v2 board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2015 Weijie Gao <hackpascal@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WDR3320_GPIO_LED_WLAN5G		12
++#define WDR3320_GPIO_LED_SYSTEM		14
++#define WDR3320_GPIO_LED_QSS		15
++#define WDR3320_GPIO_LED_WAN		4
++#define WDR3320_GPIO_LED_LAN1		18
++#define WDR3320_GPIO_LED_LAN2		20
++#define WDR3320_GPIO_LED_LAN3		21
++#define WDR3320_GPIO_LED_LAN4		22
++
++#define WDR3320_GPIO_BTN_RESET		16
++
++#define WDR3320_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WDR3320_KEYS_DEBOUNCE_INTERVAL	(3 * WDR3320_KEYS_POLL_INTERVAL)
++
++#define WDR3320_WMAC_CALDATA_OFFSET	0x1000
++#define WDR3320_PCIE_CALDATA_OFFSET	0x5000
++
++static const char *wdr3320_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data wdr3320_flash_data = {
++	.part_probes	= wdr3320_part_probes,
++};
++
++static struct gpio_led wdr3320_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:qss",
++		.gpio		= WDR3320_GPIO_LED_QSS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:system",
++		.gpio		= WDR3320_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:wlan5g",
++		.gpio		= WDR3320_GPIO_LED_WLAN5G,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button wdr3320_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WDR3320_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WDR3320_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static void __init wdr3320_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(&wdr3320_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3320_leds_gpio),
++				 wdr3320_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, WDR3320_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wdr3320_gpio_keys),
++					wdr3320_gpio_keys);
++
++	ath79_init_mac(tmpmac, mac, 0);
++	ath79_register_wmac(art + WDR3320_WMAC_CALDATA_OFFSET, tmpmac);
++
++	ath79_init_mac(tmpmac, mac, -1);
++	ap9x_pci_setup_wmac_led_pin(0, 0);
++	ap91_pci_init(art + WDR3320_PCIE_CALDATA_OFFSET, tmpmac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++
++	/* LAN */
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++
++	ath79_register_eth(1);
++
++	/* WAN */
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++
++	/* GMAC0 is connected to the PHY4 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	ath79_register_eth(0);
++
++	ath79_register_usb();
++
++	ath79_gpio_output_select(WDR3320_GPIO_LED_LAN1,
++				 AR934X_GPIO_OUT_LED_LINK0);
++	ath79_gpio_output_select(WDR3320_GPIO_LED_LAN2,
++				 AR934X_GPIO_OUT_LED_LINK1);
++	ath79_gpio_output_select(WDR3320_GPIO_LED_LAN3,
++				 AR934X_GPIO_OUT_LED_LINK2);
++	ath79_gpio_output_select(WDR3320_GPIO_LED_LAN4,
++				 AR934X_GPIO_OUT_LED_LINK3);
++	ath79_gpio_output_select(WDR3320_GPIO_LED_WAN,
++				 AR934X_GPIO_OUT_LED_LINK4);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WDR3320_V2, "TL-WDR3320-v2",
++	     "TP-LINK TL-WDR3320 v2",
++	     wdr3320_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wdr3500.c linux-4.1.13/arch/mips/ath79/mach-tl-wdr3500.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wdr3500.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wdr3500.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,169 @@
++/*
++ *  TP-LINK TL-WDR3500 board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2013 Gui Iribarren <gui@altermundi.net>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WDR3500_GPIO_LED_USB		11
++#define WDR3500_GPIO_LED_WLAN2G		13
++#define WDR3500_GPIO_LED_SYSTEM		14
++#define WDR3500_GPIO_LED_QSS		15
++#define WDR3500_GPIO_LED_WAN		18
++#define WDR3500_GPIO_LED_LAN1		19
++#define WDR3500_GPIO_LED_LAN2		20
++#define WDR3500_GPIO_LED_LAN3		21
++#define WDR3500_GPIO_LED_LAN4		22
++
++#define WDR3500_GPIO_BTN_WPS		16
++#define WDR3500_GPIO_BTN_RFKILL		17
++
++#define WDR3500_GPIO_USB_POWER		12
++
++#define WDR3500_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WDR3500_KEYS_DEBOUNCE_INTERVAL	(3 * WDR3500_KEYS_POLL_INTERVAL)
++
++#define WDR3500_MAC0_OFFSET		0
++#define WDR3500_MAC1_OFFSET		6
++#define WDR3500_WMAC_CALDATA_OFFSET	0x1000
++#define WDR3500_PCIE_CALDATA_OFFSET	0x5000
++
++static const char *wdr3500_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data wdr3500_flash_data = {
++	.part_probes	= wdr3500_part_probes,
++};
++
++static struct gpio_led wdr3500_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:qss",
++		.gpio		= WDR3500_GPIO_LED_QSS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:system",
++		.gpio		= WDR3500_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:usb",
++		.gpio		= WDR3500_GPIO_LED_USB,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:wlan2g",
++		.gpio		= WDR3500_GPIO_LED_WLAN2G,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button wdr3500_gpio_keys[] __initdata = {
++	{
++		.desc		= "QSS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WDR3500_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "RFKILL switch",
++		.type		= EV_SW,
++		.code		= KEY_RFKILL,
++		.debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WDR3500_GPIO_BTN_RFKILL,
++	},
++};
++
++
++static void __init wdr3500_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(&wdr3500_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3500_leds_gpio),
++				 wdr3500_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, WDR3500_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wdr3500_gpio_keys),
++					wdr3500_gpio_keys);
++
++	ath79_init_mac(tmpmac, mac, 0);
++	ath79_register_wmac(art + WDR3500_WMAC_CALDATA_OFFSET, tmpmac);
++
++	ath79_init_mac(tmpmac, mac, 1);
++	ap9x_pci_setup_wmac_led_pin(0, 0);
++	ap91_pci_init(art + WDR3500_PCIE_CALDATA_OFFSET, tmpmac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++
++	/* LAN */
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++
++	ath79_register_eth(1);
++
++	/* WAN */
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2);
++
++	/* GMAC0 is connected to the PHY4 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	ath79_register_eth(0);
++
++	gpio_request_one(WDR3500_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_gpio_output_select(WDR3500_GPIO_LED_LAN1,
++				 AR934X_GPIO_OUT_LED_LINK3);
++	ath79_gpio_output_select(WDR3500_GPIO_LED_LAN2,
++				 AR934X_GPIO_OUT_LED_LINK2);
++	ath79_gpio_output_select(WDR3500_GPIO_LED_LAN3,
++				 AR934X_GPIO_OUT_LED_LINK1);
++	ath79_gpio_output_select(WDR3500_GPIO_LED_LAN4,
++				 AR934X_GPIO_OUT_LED_LINK0);
++	ath79_gpio_output_select(WDR3500_GPIO_LED_WAN,
++				 AR934X_GPIO_OUT_LED_LINK4);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WDR3500, "TL-WDR3500",
++	     "TP-LINK TL-WDR3500",
++	     wdr3500_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wdr4300.c linux-4.1.13/arch/mips/ath79/mach-tl-wdr4300.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wdr4300.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wdr4300.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,206 @@
++/*
++ *  TP-LINK TL-WDR4300 board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WDR4300_GPIO_LED_USB1		11
++#define WDR4300_GPIO_LED_USB2		12
++#define WDR4300_GPIO_LED_WLAN2G		13
++#define WDR4300_GPIO_LED_SYSTEM		14
++#define WDR4300_GPIO_LED_QSS		15
++
++#define WDR4300_GPIO_BTN_WPS		16
++#define WDR4300_GPIO_BTN_RFKILL		17
++
++#define WDR4300_GPIO_EXTERNAL_LNA0	18
++#define WDR4300_GPIO_EXTERNAL_LNA1	19
++
++#define WDR4300_GPIO_USB1_POWER		22
++#define WDR4300_GPIO_USB2_POWER		21
++
++#define WDR4300_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WDR4300_KEYS_DEBOUNCE_INTERVAL	(3 * WDR4300_KEYS_POLL_INTERVAL)
++
++#define WDR4300_MAC0_OFFSET		0
++#define WDR4300_MAC1_OFFSET		6
++#define WDR4300_WMAC_CALDATA_OFFSET	0x1000
++#define WDR4300_PCIE_CALDATA_OFFSET	0x5000
++
++static const char *wdr4300_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data wdr4300_flash_data = {
++	.part_probes	= wdr4300_part_probes,
++};
++
++static struct gpio_led wdr4300_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:blue:qss",
++		.gpio		= WDR4300_GPIO_LED_QSS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:system",
++		.gpio		= WDR4300_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:usb1",
++		.gpio		= WDR4300_GPIO_LED_USB1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:usb2",
++		.gpio		= WDR4300_GPIO_LED_USB2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:wlan2g",
++		.gpio		= WDR4300_GPIO_LED_WLAN2G,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button wdr4300_gpio_keys[] __initdata = {
++	{
++		.desc		= "QSS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WDR4300_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "RFKILL switch",
++		.type		= EV_SW,
++		.code		= KEY_RFKILL,
++		.debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WDR4300_GPIO_BTN_RFKILL,
++		.active_low	= 1,
++	},
++};
++
++static const struct ar8327_led_info wdr4300_leds_ar8327[] __initconst = {
++	AR8327_LED_INFO(PHY0_0, HW, "tp-link:blue:wan"),
++	AR8327_LED_INFO(PHY1_0, HW, "tp-link:blue:lan1"),
++	AR8327_LED_INFO(PHY2_0, HW, "tp-link:blue:lan2"),
++	AR8327_LED_INFO(PHY3_0, HW, "tp-link:blue:lan3"),
++	AR8327_LED_INFO(PHY4_0, HW, "tp-link:blue:lan4"),
++};
++
++static struct ar8327_pad_cfg wdr4300_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_led_cfg wdr4300_ar8327_led_cfg = {
++	.led_ctrl0 = 0xc737c737,
++	.led_ctrl1 = 0x00000000,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x0030c300,
++	.open_drain = false,
++};
++
++static struct ar8327_platform_data wdr4300_ar8327_data = {
++	.pad0_cfg = &wdr4300_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &wdr4300_ar8327_led_cfg,
++	.num_leds = ARRAY_SIZE(wdr4300_leds_ar8327),
++	.leds = wdr4300_leds_ar8327,
++};
++
++static struct mdio_board_info wdr4300_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &wdr4300_ar8327_data,
++	},
++};
++
++static void __init wdr4300_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(&wdr4300_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr4300_leds_gpio),
++				 wdr4300_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, WDR4300_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wdr4300_gpio_keys),
++					wdr4300_gpio_keys);
++
++	ath79_wmac_set_ext_lna_gpio(0, WDR4300_GPIO_EXTERNAL_LNA0);
++	ath79_wmac_set_ext_lna_gpio(1, WDR4300_GPIO_EXTERNAL_LNA1);
++
++	ath79_init_mac(tmpmac, mac, -1);
++	ath79_register_wmac(art + WDR4300_WMAC_CALDATA_OFFSET, tmpmac);
++
++	ath79_init_mac(tmpmac, mac, 0);
++	ap9x_pci_setup_wmac_led_pin(0, 0);
++	ap91_pci_init(art + WDR4300_PCIE_CALDATA_OFFSET, tmpmac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++
++	mdiobus_register_board_info(wdr4300_mdio0_info,
++				    ARRAY_SIZE(wdr4300_mdio0_info));
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2);
++
++	/* GMAC0 is connected to an AR8327N switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++
++	gpio_request_one(WDR4300_GPIO_USB1_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB1 power");
++	gpio_request_one(WDR4300_GPIO_USB2_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB2 power");
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WDR4300, "TL-WDR4300",
++	     "TP-LINK TL-WDR3600/4300/4310",
++	     wdr4300_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wdr6500-v2.c linux-4.1.13/arch/mips/ath79/mach-tl-wdr6500-v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wdr6500-v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wdr6500-v2.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,141 @@
++/*
++ *  TP-LINK TL-WDR6500 v2
++ *
++ *  Copyright (C) 2015 Weijie Gao <hackpascal@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define TL_WDR6500_V2_GPIO_LED_SYS	21
++#define TL_WDR6500_V2_GPIO_LED_WAN	18
++#define TL_WDR6500_V2_GPIO_LED_LAN1	17
++#define TL_WDR6500_V2_GPIO_LED_LAN2	16
++#define TL_WDR6500_V2_GPIO_LED_LAN3	15
++#define TL_WDR6500_V2_GPIO_LED_LAN4	14
++
++#define TL_WDR6500_V2_GPIO_BTN_RESET	1
++
++#define TL_WDR6500_V2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WDR6500_V2_KEYS_POLL_INTERVAL)
++
++#define TL_WDR6500_V2_WMAC_CALDATA_OFFSET	0x1000
++#define TL_WDR6500_V2_PCIE_CALDATA_OFFSET	0x5000
++
++static const char *tl_wdr6500_v2_part_probes[] = {
++	"tp-link-64k",
++	NULL,
++};
++
++static struct flash_platform_data tl_wdr6500_v2_flash_data = {
++	.part_probes	= tl_wdr6500_v2_part_probes,
++};
++
++static struct gpio_led tl_wdr6500_v2_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan1",
++		.gpio		= TL_WDR6500_V2_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan2",
++		.gpio		= TL_WDR6500_V2_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan3",
++		.gpio		= TL_WDR6500_V2_GPIO_LED_LAN3,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan4",
++		.gpio		= TL_WDR6500_V2_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wan",
++		.gpio		= TL_WDR6500_V2_GPIO_LED_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:white:system",
++		.gpio		= TL_WDR6500_V2_GPIO_LED_SYS,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button tl_wdr6500_v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WDR6500_V2_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++
++static void __init tl_ap151_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(&tl_wdr6500_v2_flash_data);
++
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* WAN */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_register_eth(0);
++
++	/* LAN */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++	ath79_register_eth(1);
++
++	ath79_init_mac(tmpmac, mac, -1);
++	ath79_register_wmac(ee + TL_WDR6500_V2_WMAC_CALDATA_OFFSET, tmpmac);
++
++	ath79_register_pci();
++
++	ath79_register_usb();
++}
++
++static void __init tl_wdr6500_v2_setup(void)
++{
++	tl_ap151_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wdr6500_v2_leds_gpio),
++				 tl_wdr6500_v2_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, TL_WDR6500_V2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wdr6500_v2_gpio_keys),
++					tl_wdr6500_v2_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WDR6500_V2, "TL-WDR6500-v2", "TP-LINK TL-WDR6500 v2",
++	     tl_wdr6500_v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr1041n-v2.c linux-4.1.13/arch/mips/ath79/mach-tl-wr1041n-v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr1041n-v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr1041n-v2.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,138 @@
++/*
++ *  TP-LINK TL-WR1041 v2 board support
++ *
++ *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2011-2012 Anan Huang <axishero@foxmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WR1041NV2_GPIO_BTN_RESET	14
++#define TL_WR1041NV2_GPIO_LED_WPS	13
++#define TL_WR1041NV2_GPIO_LED_WLAN	11
++
++#define TL_WR1041NV2_GPIO_LED_SYSTEM	12
++
++#define TL_WR1041NV2_KEYS_POLL_INTERVAL		20	/* msecs */
++#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WR1041NV2_KEYS_POLL_INTERVAL)
++
++#define TL_WR1041NV2_PCIE_CALDATA_OFFSET	0x5000
++
++static const char *tl_wr1041nv2_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr1041nv2_flash_data = {
++	.part_probes	= tl_wr1041nv2_part_probes,
++};
++
++static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WR1041NV2_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wps",
++		.gpio		= TL_WR1041NV2_GPIO_LED_WPS,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WR1041NV2_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR1041NV2_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data db120_ar8327_data = {
++	.pad0_cfg = &db120_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	}
++};
++
++static struct mdio_board_info db120_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &db120_ar8327_data,
++	},
++};
++
++static void __init tl_wr1041nv2_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(&tl_wr1041nv2_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio),
++				 tl_wr1041nv2_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(tl_wr1041nv2_gpio_keys),
++					 tl_wr1041nv2_gpio_keys);
++	ath79_register_wmac(ee, mac);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++
++	mdiobus_register_board_info(db120_mdio0_info,
++				    ARRAY_SIZE(db120_mdio0_info));
++
++	/* GMAC0 is connected to an AR8327 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2",
++	     "TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr1043nd.c linux-4.1.13/arch/mips/ath79/mach-tl-wr1043nd.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr1043nd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr1043nd.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,141 @@
++/*
++ *  TP-LINK TL-WR1043N/ND board support
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/rtl8366.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "dev-eth.h"
++#include "dev-m25p80.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WR1043ND_GPIO_LED_USB        1
++#define TL_WR1043ND_GPIO_LED_SYSTEM     2
++#define TL_WR1043ND_GPIO_LED_QSS        5
++#define TL_WR1043ND_GPIO_LED_WLAN       9
++
++#define TL_WR1043ND_GPIO_BTN_RESET      3
++#define TL_WR1043ND_GPIO_BTN_QSS        7
++
++#define TL_WR1043ND_GPIO_RTL8366_SDA	18
++#define TL_WR1043ND_GPIO_RTL8366_SCK	19
++
++#define TL_WR1043ND_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL)
++
++static const char *tl_wr1043nd_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr1043nd_flash_data = {
++	.part_probes	= tl_wr1043nd_part_probes,
++};
++
++static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:usb",
++		.gpio		= TL_WR1043ND_GPIO_LED_USB,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WR1043ND_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WR1043ND_GPIO_LED_QSS,
++		.active_low	= 0,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WR1043ND_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR1043ND_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "qss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR1043ND_GPIO_BTN_QSS,
++		.active_low	= 1,
++	}
++};
++
++static void tl_wr1043nd_rtl8366rb_hw_reset(bool active)
++{
++	if (active)
++		ath79_device_reset_set(AR71XX_RESET_GE0_PHY);
++	else
++		ath79_device_reset_clear(AR71XX_RESET_GE0_PHY);
++}
++
++static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = {
++	.gpio_sda	= TL_WR1043ND_GPIO_RTL8366_SDA,
++	.gpio_sck	= TL_WR1043ND_GPIO_RTL8366_SCK,
++	.hw_reset	= tl_wr1043nd_rtl8366rb_hw_reset,
++};
++
++static struct platform_device tl_wr1043nd_rtl8366rb_device = {
++	.name		= RTL8366RB_DRIVER_NAME,
++	.id		= -1,
++	.dev = {
++		.platform_data	= &tl_wr1043nd_rtl8366rb_data,
++	}
++};
++
++static void __init tl_wr1043nd_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	tl_wr1043nd_rtl8366rb_hw_reset(true);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_pll_data.pll_1000 = 0x1a000000;
++
++	ath79_register_eth(0);
++
++	ath79_register_usb();
++
++	ath79_register_m25p80(&tl_wr1043nd_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
++				 tl_wr1043nd_leds_gpio);
++
++	platform_device_register(&tl_wr1043nd_rtl8366rb_device);
++
++	ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr1043nd_gpio_keys),
++					tl_wr1043nd_gpio_keys);
++
++	ath79_register_wmac(eeprom, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",
++	     tl_wr1043nd_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr1043nd-v2.c linux-4.1.13/arch/mips/ath79/mach-tl-wr1043nd-v2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr1043nd-v2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr1043nd-v2.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,215 @@
++/*
++ * TP-LINK TL-WR1043ND v2 board support
++ *
++ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
++ *   Copyright (c) 2012 Qualcomm Atheros
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WR1043_V2_GPIO_LED_WLAN	12
++#define TL_WR1043_V2_GPIO_LED_USB	15
++#define TL_WR1043_V2_GPIO_LED_WPS	18
++#define TL_WR1043_V2_GPIO_LED_SYSTEM	19
++
++#define TL_WR1043_V2_GPIO_BTN_RESET	16
++#define TL_WR1043_V2_GPIO_BTN_RFKILL	17
++
++#define TL_WR1043_V2_GPIO_USB_POWER	21
++
++#define TL_WR1043_V2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V2_KEYS_POLL_INTERVAL)
++
++#define TL_WR1043_V2_WMAC_CALDATA_OFFSET	0x1000
++
++static const char *wr1043nd_v2_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data wr1043nd_v2_flash_data = {
++	.part_probes	= wr1043nd_v2_part_probes,
++};
++
++static struct gpio_led tl_wr1043_v2_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:wps",
++		.gpio		= TL_WR1043_V2_GPIO_LED_WPS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WR1043_V2_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WR1043_V2_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:green:usb",
++		.gpio		= TL_WR1043_V2_GPIO_LED_USB,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_wr1043_v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR1043_V2_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "RFKILL button",
++		.type		= EV_KEY,
++		.code		= KEY_RFKILL,
++		.debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR1043_V2_GPIO_BTN_RFKILL,
++		.active_low	= 1,
++	},
++};
++
++static const struct ar8327_led_info tl_wr1043_leds_ar8327[] = {
++	AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:lan4"),
++	AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan3"),
++	AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"),
++	AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan1"),
++	AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:wan"),
++};
++
++/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
++static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_SGMII,
++	.sgmii_delay_en = true,
++};
++
++/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
++static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad6_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_led_cfg wr1043nd_v2_ar8327_led_cfg = {
++	.led_ctrl0 = 0xcc35cc35,
++	.led_ctrl1 = 0xca35ca35,
++	.led_ctrl2 = 0xc935c935,
++	.led_ctrl3 = 0x03ffff00,
++	.open_drain = true,
++};
++
++static struct ar8327_platform_data wr1043nd_v2_ar8327_data = {
++	.pad0_cfg = &wr1043nd_v2_ar8327_pad0_cfg,
++	.pad6_cfg = &wr1043nd_v2_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &wr1043nd_v2_ar8327_led_cfg,
++	.num_leds = ARRAY_SIZE(tl_wr1043_leds_ar8327),
++	.leds = tl_wr1043_leds_ar8327,
++};
++
++static struct mdio_board_info wr1043nd_v2_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &wr1043nd_v2_ar8327_data,
++	},
++};
++
++static void __init tl_wr1043nd_v2_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(&wr1043nd_v2_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043_v2_leds_gpio),
++				 tl_wr1043_v2_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, TL_WR1043_V2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr1043_v2_gpio_keys),
++					tl_wr1043_v2_gpio_keys);
++
++	ath79_register_wmac(art + TL_WR1043_V2_WMAC_CALDATA_OFFSET, mac);
++
++	mdiobus_register_board_info(wr1043nd_v2_mdio0_info,
++				    ARRAY_SIZE(wr1043nd_v2_mdio0_info));
++	ath79_register_mdio(0, 0x0);
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x56000000;
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++	ath79_register_eth(1);
++
++	ath79_register_usb();
++
++	gpio_request_one(TL_WR1043_V2_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V2, "TL-WR1043ND-v2",
++	     "TP-LINK TL-WR1043ND v2", tl_wr1043nd_v2_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr2543n.c linux-4.1.13/arch/mips/ath79/mach-tl-wr2543n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr2543n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr2543n.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,156 @@
++/*
++ *  TP-LINK TL-WR2543N/ND board support
++ *
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/rtl8367.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define TL_WR2543N_GPIO_LED_WPS        0
++#define TL_WR2543N_GPIO_LED_USB        8
++
++/* The WLAN LEDs use GPIOs on the discrete AR9380 wmac */
++#define TL_WR2543N_GPIO_WMAC_LED_WLAN2G 0
++#define TL_WR2543N_GPIO_WMAC_LED_WLAN5G 1
++
++#define TL_WR2543N_GPIO_BTN_RESET      11
++#define TL_WR2543N_GPIO_BTN_WPS        12
++
++#define TL_WR2543N_GPIO_RTL8367_SDA	1
++#define TL_WR2543N_GPIO_RTL8367_SCK	6
++
++#define TL_WR2543N_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL)
++
++static const char *tl_wr2543n_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr2543n_flash_data = {
++	.part_probes	= tl_wr2543n_part_probes,
++};
++
++static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:usb",
++		.gpio		= TL_WR2543N_GPIO_LED_USB,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wps",
++		.gpio		= TL_WR2543N_GPIO_LED_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_led tl_wr2543n_wmac_leds_gpio[] = {
++	{
++		.name		= "tp-link:green:wlan5g",
++		.gpio		= TL_WR2543N_GPIO_WMAC_LED_WLAN5G,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR2543N_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR2543N_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = {
++	.mode = RTL8367_EXTIF_MODE_RGMII,
++	.txdelay = 1,
++	.rxdelay = 0,
++	.ability = {
++		.force_mode = 1,
++		.txpause = 1,
++		.rxpause = 1,
++		.link = 1,
++		.duplex = 1,
++		.speed = RTL8367_PORT_SPEED_1000,
++	},
++};
++
++static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = {
++	.gpio_sda	= TL_WR2543N_GPIO_RTL8367_SDA,
++	.gpio_sck	= TL_WR2543N_GPIO_RTL8367_SCK,
++	.extif0_cfg	= &tl_wr2543n_rtl8367_extif0_cfg,
++};
++
++static struct platform_device tl_wr2543n_rtl8367_device = {
++	.name		= RTL8367_DRIVER_NAME,
++	.id		= -1,
++	.dev = {
++		.platform_data	= &tl_wr2543n_rtl8367_data,
++	}
++};
++
++static void __init tl_wr2543n_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(&tl_wr2543n_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio),
++				 tl_wr2543n_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr2543n_gpio_keys),
++					tl_wr2543n_gpio_keys);
++	ath79_register_usb();
++
++	/*
++	 * The ath9k driver uses this pin for its default led device, which is
++	 * named ath9k-phy0, and reflects activity on either the 2 GHz or 5 GHz
++	 * bands. This pin is connected to the WR2543's 2GHz WLAN LED.
++	 */
++	ap9x_pci_setup_wmac_led_pin(0, TL_WR2543N_GPIO_WMAC_LED_WLAN2G);
++
++	/*
++	 * We also have the driver set up an led device for the WR2543's
++	 * separate 5 GHz WLAN LED in case the user wants it.
++	 */
++	ap9x_pci_setup_wmac_leds(0, tl_wr2543n_wmac_leds_gpio,
++				 ARRAY_SIZE(tl_wr2543n_wmac_leds_gpio));
++	ap91_pci_init(eeprom, mac);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
++	ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_pll_data.pll_1000 = 0x1a000000;
++
++	ath79_register_eth(0);
++
++	platform_device_register(&tl_wr2543n_rtl8367_device);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND",
++	     tl_wr2543n_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr703n.c linux-4.1.13/arch/mips/ath79/mach-tl-wr703n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr703n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr703n.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,118 @@
++/*
++ *  TP-LINK TL-WR703N/TL-MR10U board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WR703N_GPIO_LED_SYSTEM	27
++#define TL_WR703N_GPIO_BTN_RESET	11
++
++#define TL_WR703N_GPIO_USB_POWER	8
++
++#define TL_MR10U_GPIO_USB_POWER		18
++
++#define TL_WR703N_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WR703N_KEYS_POLL_INTERVAL)
++
++static const char *tl_wr703n_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr703n_flash_data = {
++	.part_probes	= tl_wr703n_part_probes,
++};
++
++static struct gpio_led tl_wr703n_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:blue:system",
++		.gpio		= TL_WR703N_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR703N_GPIO_BTN_RESET,
++		.active_low	= 0,
++	}
++};
++
++static void __init common_setup(unsigned usb_power_gpio, bool sec_ethernet)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_m25p80(&tl_wr703n_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio),
++				 tl_wr703n_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr703n_gpio_keys),
++					tl_wr703n_gpio_keys);
++
++	gpio_request_one(usb_power_gpio,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++
++	if (sec_ethernet)
++	{
++		ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++		ath79_register_eth(1);
++	}
++
++	ath79_register_wmac(ee, mac);
++}
++
++static void __init tl_mr10u_setup(void)
++{
++	common_setup(TL_MR10U_GPIO_USB_POWER, false);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR10U, "TL-MR10U", "TP-LINK TL-MR10U",
++	     tl_mr10u_setup);
++
++static void __init tl_wr703n_setup(void)
++{
++	common_setup(TL_WR703N_GPIO_USB_POWER, false);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1",
++	     tl_wr703n_setup);
++
++static void __init tl_wr710n_setup(void)
++{
++	common_setup(TL_WR703N_GPIO_USB_POWER, true);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR710N, "TL-WR710N", "TP-LINK TL-WR710N v1",
++	     tl_wr710n_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr720n-v3.c linux-4.1.13/arch/mips/ath79/mach-tl-wr720n-v3.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr720n-v3.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr720n-v3.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,108 @@
++/*
++ *  TP-LINK TL-WR720N board support
++ *
++ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2013 yousong <yszhou4tech@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WR720N_GPIO_LED_SYSTEM	27
++#define TL_WR720N_GPIO_BTN_RESET	11
++#define TL_WR720N_GPIO_BTN_SW1		18
++#define TL_WR720N_GPIO_BTN_SW2		20
++
++#define TL_WR720N_GPIO_USB_POWER	8
++
++#define TL_WR720N_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR720N_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WR720N_KEYS_POLL_INTERVAL)
++
++static const char *tl_wr720n_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr720n_flash_data = {
++	.part_probes	= tl_wr720n_part_probes,
++};
++
++static struct gpio_led tl_wr720n_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:blue:system",
++		.gpio		= TL_WR720N_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_wr720n_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR720N_GPIO_BTN_RESET,
++		.active_low	= 0,
++	}, {
++		.desc		= "sw1",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR720N_GPIO_BTN_SW1,
++		.active_low = 0,
++	}, {
++		.desc		= "sw2",
++		.type		= EV_KEY,
++		.code		= BTN_1,
++		.debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR720N_GPIO_BTN_SW2,
++		.active_low = 0,
++	}
++};
++
++static void __init tl_wr720n_v3_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* disable PHY_SWAP and PHY_ADDR_SWAP bits */
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_m25p80(&tl_wr720n_flash_data);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr720n_leds_gpio),
++					tl_wr720n_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, TL_WR720N_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr720n_gpio_keys),
++					tl_wr720n_gpio_keys);
++
++	gpio_request_one(TL_WR720N_GPIO_USB_POWER,
++			GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			"USB power");
++	ath79_register_usb();
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR720N_V3, "TL-WR720N-v3", "TP-LINK TL-WR720N v3/v4",
++		tl_wr720n_v3_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr741nd.c linux-4.1.13/arch/mips/ath79/mach-tl-wr741nd.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr741nd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr741nd.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,130 @@
++/*
++ *  TP-LINK TL-WR741ND board support
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++
++#define TL_WR741ND_GPIO_LED_QSS		0
++#define TL_WR741ND_GPIO_LED_SYSTEM	1
++#define TL_WR741ND_GPIO_LED_LAN1	13
++#define TL_WR741ND_GPIO_LED_LAN2	14
++#define TL_WR741ND_GPIO_LED_LAN3	15
++#define TL_WR741ND_GPIO_LED_LAN4	16
++#define TL_WR741ND_GPIO_LED_WAN		17
++
++#define TL_WR741ND_GPIO_BTN_RESET	11
++#define TL_WR741ND_GPIO_BTN_QSS		12
++
++#define TL_WR741ND_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL)
++
++static const char *tl_wr741nd_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr741nd_flash_data = {
++	.part_probes	= tl_wr741nd_part_probes,
++};
++
++static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan1",
++		.gpio		= TL_WR741ND_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan2",
++		.gpio		= TL_WR741ND_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan3",
++		.gpio		= TL_WR741ND_GPIO_LED_LAN3,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan4",
++		.gpio		= TL_WR741ND_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WR741ND_GPIO_LED_QSS,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WR741ND_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wan",
++		.gpio		= TL_WR741ND_GPIO_LED_WAN,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR741ND_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "qss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR741ND_GPIO_BTN_QSS,
++		.active_low	= 1,
++	}
++};
++
++static void __init tl_wr741nd_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(&tl_wr741nd_flash_data);
++
++	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
++				 tl_wr741nd_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr741nd_gpio_keys),
++					tl_wr741nd_gpio_keys);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++
++	/* WAN port */
++	ath79_register_eth(0);
++
++	ap9x_pci_setup_wmac_led_pin(0, 1);
++	ap91_pci_init(ee, mac);
++}
++MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
++	     tl_wr741nd_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr741nd-v4.c linux-4.1.13/arch/mips/ath79/mach-tl-wr741nd-v4.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr741nd-v4.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr741nd-v4.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,187 @@
++/*
++ *  TP-LINK TL-WR741ND v4/TL-MR3220 v2 board support
++ *
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WR741NDV4_GPIO_BTN_RESET	11
++#define TL_WR741NDV4_GPIO_BTN_WPS	26
++
++#define TL_WR741NDV4_GPIO_LED_WLAN	0
++#define TL_WR741NDV4_GPIO_LED_QSS	1
++#define TL_WR741NDV4_GPIO_LED_WAN	13
++#define TL_WR741NDV4_GPIO_LED_LAN1	14
++#define TL_WR741NDV4_GPIO_LED_LAN2	15
++#define TL_WR741NDV4_GPIO_LED_LAN3	16
++#define TL_WR741NDV4_GPIO_LED_LAN4	17
++#define TL_WR741NDV4_GPIO_LED_SYSTEM	27
++
++#define TL_MR3220V2_GPIO_BTN_WPS	11
++#define TL_MR3220V2_GPIO_BTN_WIFI	24
++
++#define TL_MR3220V2_GPIO_LED_3G		26
++#define TL_MR3220V2_GPIO_USB_POWER	8
++
++#define TL_WR741NDV4_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL)
++
++static const char *tl_wr741ndv4_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr741ndv4_flash_data = {
++	.part_probes	= tl_wr741ndv4_part_probes,
++};
++
++static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan1",
++		.gpio		= TL_WR741NDV4_GPIO_LED_LAN1,
++		.active_low	= 0,
++	}, {
++		.name		= "tp-link:green:lan2",
++		.gpio		= TL_WR741NDV4_GPIO_LED_LAN2,
++		.active_low	= 0,
++	}, {
++		.name		= "tp-link:green:lan3",
++		.gpio		= TL_WR741NDV4_GPIO_LED_LAN3,
++		.active_low	= 0,
++	}, {
++		.name		= "tp-link:green:lan4",
++		.gpio		= TL_WR741NDV4_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WR741NDV4_GPIO_LED_QSS,
++		.active_low	= 0,
++	}, {
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WR741NDV4_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wan",
++		.gpio		= TL_WR741NDV4_GPIO_LED_WAN,
++		.active_low	= 0,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WR741NDV4_GPIO_LED_WLAN,
++		.active_low	= 0,
++	}, {
++		/* the 3G LED is only present on the MR3220 v2 */
++		.name		= "tp-link:green:3g",
++		.gpio		= TL_MR3220V2_GPIO_LED_3G,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR741NDV4_GPIO_BTN_RESET,
++		.active_low	= 0,
++	}, {
++		.desc		= "WPS",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR741NDV4_GPIO_BTN_WPS,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button tl_mr3220v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR3220V2_GPIO_BTN_WPS,
++		.active_low	= 0,
++	}, {
++		.desc		= "WIFI button",
++		.type		= EV_KEY,
++		.code		= KEY_RFKILL,
++		.debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_MR3220V2_GPIO_BTN_WIFI,
++		.active_low	= 0,
++	}
++};
++
++static void __init tl_ap121_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_setup_ar933x_phy4_switch(true, true);
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_register_m25p80(&tl_wr741ndv4_flash_data);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, mac);
++}
++
++static void __init tl_wr741ndv4_setup(void)
++{
++	tl_ap121_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio) - 1,
++				 tl_wr741ndv4_leds_gpio);
++	ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
++					tl_wr741ndv4_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
++	     "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
++
++static void __init tl_mr3220v2_setup(void)
++{
++	tl_ap121_setup();
++
++	gpio_request_one(TL_MR3220V2_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio),
++				 tl_wr741ndv4_leds_gpio);
++	ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_mr3220v2_gpio_keys),
++					tl_mr3220v2_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR3220_V2, "TL-MR3220-v2",
++	     "TP-LINK TL-MR3220 v2", tl_mr3220v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr841n.c linux-4.1.13/arch/mips/ath79/mach-tl-wr841n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr841n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr841n.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,140 @@
++/*
++ *  TP-LINK TL-WR841N/ND v1 board support
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-dsa.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define TL_WR841ND_V1_GPIO_LED_SYSTEM		2
++#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN	4
++#define TL_WR841ND_V1_GPIO_LED_QSS_RED		5
++
++#define TL_WR841ND_V1_GPIO_BTN_RESET		3
++#define TL_WR841ND_V1_GPIO_BTN_QSS		7
++
++#define TL_WR841ND_V1_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \
++				(3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL)
++
++static struct mtd_partition tl_wr841n_v1_partitions[] = {
++	{
++		.name		= "redboot",
++		.offset		= 0,
++		.size		= 0x020000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "kernel",
++		.offset		= 0x020000,
++		.size		= 0x140000,
++	}, {
++		.name		= "rootfs",
++		.offset		= 0x160000,
++		.size		= 0x280000,
++	}, {
++		.name		= "config",
++		.offset		= 0x3e0000,
++		.size		= 0x020000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "firmware",
++		.offset		= 0x020000,
++		.size		= 0x3c0000,
++	}
++};
++
++static struct flash_platform_data tl_wr841n_v1_flash_data = {
++	.parts		= tl_wr841n_v1_partitions,
++	.nr_parts	= ARRAY_SIZE(tl_wr841n_v1_partitions),
++};
++
++static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WR841ND_V1_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:red:qss",
++		.gpio		= TL_WR841ND_V1_GPIO_LED_QSS_RED,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WR841ND_V1_GPIO_LED_QSS_GREEN,
++	}
++};
++
++static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR841ND_V1_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "qss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR841ND_V1_GPIO_BTN_QSS,
++		.active_low	= 1,
++	}
++};
++
++static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
++	.port_names[0]  = "wan",
++	.port_names[1]  = "lan1",
++	.port_names[2]  = "lan2",
++	.port_names[3]  = "lan3",
++	.port_names[4]  = "lan4",
++	.port_names[5]  = "cpu",
++};
++
++static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
++	.nr_chips	= 1,
++	.chip		= &tl_wr841n_v1_dsa_chip,
++};
++
++static void __init tl_wr841n_v1_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++	ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
++			   &tl_wr841n_v1_dsa_data);
++
++	ath79_register_m25p80(&tl_wr841n_v1_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
++				 tl_wr841n_v1_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr841n_v1_gpio_keys),
++					tl_wr841n_v1_gpio_keys);
++	ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1",
++	     tl_wr841n_v1_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr841n-v8.c linux-4.1.13/arch/mips/ath79/mach-tl-wr841n-v8.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr841n-v8.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr841n-v8.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,286 @@
++/*
++ *  TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WR841NV8_GPIO_LED_WLAN	13
++#define TL_WR841NV8_GPIO_LED_QSS	15
++#define TL_WR841NV8_GPIO_LED_WAN	18
++#define TL_WR841NV8_GPIO_LED_LAN1	19
++#define TL_WR841NV8_GPIO_LED_LAN2	20
++#define TL_WR841NV8_GPIO_LED_LAN3	21
++#define TL_WR841NV8_GPIO_LED_LAN4	12
++#define TL_WR841NV8_GPIO_LED_SYSTEM	14
++
++#define TL_WR841NV8_GPIO_BTN_RESET	17
++#define TL_WR841NV8_GPIO_SW_RFKILL	16	/* WPS for MR3420 v2 */
++
++#define TL_MR3420V2_GPIO_LED_3G	11
++#define TL_MR3420V2_GPIO_USB_POWER	4
++
++#define TL_WR941NDV5_GPIO_LED_WLAN	13
++#define TL_WR941NDV5_GPIO_LED_QSS	15
++#define TL_WR941NDV5_GPIO_LED_WAN	18
++#define TL_WR941NDV5_GPIO_LED_LAN1	19
++#define TL_WR941NDV5_GPIO_LED_LAN2	20
++#define TL_WR941NDV5_GPIO_LED_LAN3	2
++#define TL_WR941NDV5_GPIO_LED_LAN4	3
++#define TL_WR941NDV5_GPIO_LED_SYSTEM	14
++
++#define TL_WR841NV8_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV8_KEYS_POLL_INTERVAL)
++
++static const char *tl_wr841n_v8_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr841n_v8_flash_data = {
++	.part_probes	= tl_wr841n_v8_part_probes,
++};
++
++static struct gpio_led tl_wr841n_v8_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan1",
++		.gpio		= TL_WR841NV8_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan2",
++		.gpio		= TL_WR841NV8_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan3",
++		.gpio		= TL_WR841NV8_GPIO_LED_LAN3,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan4",
++		.gpio		= TL_WR841NV8_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WR841NV8_GPIO_LED_QSS,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WR841NV8_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wan",
++		.gpio		= TL_WR841NV8_GPIO_LED_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WR841NV8_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}, {
++		/* the 3G LED is only present on the MR3420 v2 */
++		.name		= "tp-link:green:3g",
++		.gpio		= TL_MR3420V2_GPIO_LED_3G,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_wr841n_v8_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR841NV8_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "RFKILL switch",
++		.type		= EV_SW,
++		.code		= KEY_RFKILL,
++		.debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR841NV8_GPIO_SW_RFKILL,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button tl_mr3420v2_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR841NV8_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "WPS",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR841NV8_GPIO_SW_RFKILL,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_led tl_wr941nd_v5_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan1",
++		.gpio		= TL_WR941NDV5_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan2",
++		.gpio		= TL_WR941NDV5_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan3",
++		.gpio		= TL_WR941NDV5_GPIO_LED_LAN3,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan4",
++		.gpio		= TL_WR941NDV5_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WR941NDV5_GPIO_LED_QSS,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WR941NDV5_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wan",
++		.gpio		= TL_WR941NDV5_GPIO_LED_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WR941NDV5_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++};
++
++static void __init tl_ap123_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	/* Disable JTAG, enabling GPIOs 0-3 */
++	/* Configure OBS4 line, for GPIO 4*/
++	ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
++				 AR934X_GPIO_FUNC_CLK_OBS4_EN);
++
++	/* config gpio4 as normal gpio function */
++	ath79_gpio_output_select(TL_MR3420V2_GPIO_USB_POWER,
++				 AR934X_GPIO_OUT_GPIO);
++
++	ath79_register_m25p80(&tl_wr841n_v8_flash_data);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
++
++	ath79_register_mdio(1, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++
++	/* GMAC0 is connected to the PHY0 of the internal switch */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, mac);
++}
++
++static void __init tl_wr841n_v8_setup(void)
++{
++	tl_ap123_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio) - 1,
++				 tl_wr841n_v8_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
++					tl_wr841n_v8_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-WR841N/ND v8",
++	     tl_wr841n_v8_setup);
++
++
++static void __init tl_wr842n_v2_setup(void)
++{
++	tl_ap123_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio),
++				 tl_wr841n_v8_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
++					tl_wr841n_v8_gpio_keys);
++
++	gpio_request_one(TL_MR3420V2_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR842N_V2, "TL-WR842N-v2", "TP-LINK TL-WR842N/ND v2",
++	     tl_wr842n_v2_setup);
++
++static void __init tl_mr3420v2_setup(void)
++{
++	tl_ap123_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio),
++				tl_wr841n_v8_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
++				ARRAY_SIZE(tl_mr3420v2_gpio_keys),
++				tl_mr3420v2_gpio_keys);
++
++	/* enable power for the USB port */
++	gpio_request_one(TL_MR3420V2_GPIO_USB_POWER,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_MR3420_V2, "TL-MR3420-v2", "TP-LINK TL-MR3420 v2",
++	     tl_mr3420v2_setup);
++
++
++static void __init tl_wr941nd_v5_setup(void)
++{
++	tl_ap123_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_v5_leds_gpio),
++				 tl_wr941nd_v5_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
++					tl_wr841n_v8_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR941ND_V5, "TL-WR941ND-v5", "TP-LINK TL-WR941N/ND v5",
++	     tl_wr941nd_v5_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr841n-v9.c linux-4.1.13/arch/mips/ath79/mach-tl-wr841n-v9.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr841n-v9.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr841n-v9.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,144 @@
++/*
++ *  TP-LINK TL-WR841N/ND v9
++ *
++ *  Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WR841NV9_GPIO_LED_WLAN	13
++#define TL_WR841NV9_GPIO_LED_QSS	3
++#define TL_WR841NV9_GPIO_LED_WAN	4
++#define TL_WR841NV9_GPIO_LED_LAN1	16
++#define TL_WR841NV9_GPIO_LED_LAN2	15
++#define TL_WR841NV9_GPIO_LED_LAN3	14
++#define TL_WR841NV9_GPIO_LED_LAN4	11
++
++#define TL_WR841NV9_GPIO_BTN_RESET	12
++#define TL_WR841NV9_GPIO_BTN_WIFI	17
++
++#define TL_WR841NV9_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV9_KEYS_POLL_INTERVAL)
++
++static const char *tl_wr841n_v9_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr841n_v9_flash_data = {
++	.part_probes	= tl_wr841n_v9_part_probes,
++};
++
++static struct gpio_led tl_wr841n_v9_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:lan1",
++		.gpio		= TL_WR841NV9_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan2",
++		.gpio		= TL_WR841NV9_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan3",
++		.gpio		= TL_WR841NV9_GPIO_LED_LAN3,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:lan4",
++		.gpio		= TL_WR841NV9_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WR841NV9_GPIO_LED_QSS,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wan",
++		.gpio		= TL_WR841NV9_GPIO_LED_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WR841NV9_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_wr841n_v9_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR841NV9_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "WIFI button",
++		.type		= EV_KEY,
++		.code		= KEY_RFKILL,
++		.debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR841NV9_GPIO_BTN_WIFI,
++		.active_low	= 1,
++	}
++};
++
++
++static void __init tl_ap143_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(&tl_wr841n_v9_flash_data);
++
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_switch_data.phy_poll_mask |= BIT(4);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
++	ath79_register_eth(1);
++
++	/* WAN */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_register_eth(0);
++
++	ath79_init_mac(tmpmac, mac, 0);
++	ath79_register_wmac(ee, tmpmac);
++}
++
++static void __init tl_wr841n_v9_setup(void)
++{
++	tl_ap143_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v9_leds_gpio),
++				 tl_wr841n_v9_leds_gpio);
++
++	ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr841n_v9_gpio_keys),
++					tl_wr841n_v9_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR841N_V9, "TL-WR841N-v9", "TP-LINK TL-WR841N/ND v9",
++	     tl_wr841n_v9_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr941nd.c linux-4.1.13/arch/mips/ath79/mach-tl-wr941nd.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr941nd.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr941nd.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,121 @@
++/*
++ *  TP-LINK TL-WR941ND board support
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-dsa.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TL_WR941ND_GPIO_LED_SYSTEM	2
++#define TL_WR941ND_GPIO_LED_QSS_RED	4
++#define TL_WR941ND_GPIO_LED_QSS_GREEN	5
++#define TL_WR941ND_GPIO_LED_WLAN	9
++
++#define TL_WR941ND_GPIO_BTN_RESET	3
++#define TL_WR941ND_GPIO_BTN_QSS		7
++
++#define TL_WR941ND_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL)
++
++static const char *tl_wr941nd_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr941nd_flash_data = {
++	.part_probes	= tl_wr941nd_part_probes,
++};
++
++static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:green:system",
++		.gpio		= TL_WR941ND_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:red:qss",
++		.gpio		= TL_WR941ND_GPIO_LED_QSS_RED,
++	}, {
++		.name		= "tp-link:green:qss",
++		.gpio		= TL_WR941ND_GPIO_LED_QSS_GREEN,
++	}, {
++		.name		= "tp-link:green:wlan",
++		.gpio		= TL_WR941ND_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR941ND_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "qss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR941ND_GPIO_BTN_QSS,
++		.active_low	= 1,
++	}
++};
++
++static struct dsa_chip_data tl_wr941nd_dsa_chip = {
++	.port_names[0]  = "wan",
++	.port_names[1]  = "lan1",
++	.port_names[2]  = "lan2",
++	.port_names[3]  = "lan3",
++	.port_names[4]  = "lan4",
++	.port_names[5]  = "cpu",
++};
++
++static struct dsa_platform_data tl_wr941nd_dsa_data = {
++	.nr_chips	= 1,
++	.chip		= &tl_wr941nd_dsa_chip,
++};
++
++static void __init tl_wr941nd_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++	ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
++			   &tl_wr941nd_dsa_data);
++
++	ath79_register_m25p80(&tl_wr941nd_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
++				 tl_wr941nd_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr941nd_gpio_keys),
++					tl_wr941nd_gpio_keys);
++	ath79_register_wmac(eeprom, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",
++	     tl_wr941nd_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr941nd-v6.c linux-4.1.13/arch/mips/ath79/mach-tl-wr941nd-v6.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tl-wr941nd-v6.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tl-wr941nd-v6.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,149 @@
++/*
++ *  TP-LINK TL-WR941N/ND v6 board support
++ *
++ *  Copyright (C) 2015 Matthias Schiffer <mschiffer@universe-factory.net>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++
++#define TL_WR941ND_V6_GPIO_LED_QSS		3
++#define TL_WR941ND_V6_GPIO_LED_WAN		14
++#define TL_WR941ND_V6_GPIO_LED_WAN_RED		15
++#define TL_WR941ND_V6_GPIO_LED_LAN1		7
++#define TL_WR941ND_V6_GPIO_LED_LAN2		6
++#define TL_WR941ND_V6_GPIO_LED_LAN3		5
++#define TL_WR941ND_V6_GPIO_LED_LAN4		4
++#define TL_WR941ND_V6_GPIO_LED_WLAN		8
++#define TL_WR941ND_V6_GPIO_LED_SYSTEM		18
++
++#define TL_WR941ND_V6_GPIO_BTN_RESET		1
++#define TL_WR941ND_V6_GPIO_BTN_RFKILL		2
++
++#define TL_WR941ND_V6_KEYS_POLL_INTERVAL	20
++#define TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WR941ND_V6_KEYS_POLL_INTERVAL)
++
++
++static struct gpio_led tl_wr941nd_v6_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:blue:qss",
++		.gpio		= TL_WR941ND_V6_GPIO_LED_QSS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:wan",
++		.gpio		= TL_WR941ND_V6_GPIO_LED_WAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:red:wan",
++		.gpio		= TL_WR941ND_V6_GPIO_LED_WAN_RED,
++		.active_low	= 0,
++	},
++	{
++		.name		= "tp-link:blue:lan1",
++		.gpio		= TL_WR941ND_V6_GPIO_LED_LAN1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:lan2",
++		.gpio		= TL_WR941ND_V6_GPIO_LED_LAN2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:lan3",
++		.gpio		= TL_WR941ND_V6_GPIO_LED_LAN3,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:lan4",
++		.gpio		= TL_WR941ND_V6_GPIO_LED_LAN4,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:wlan",
++		.gpio		= TL_WR941ND_V6_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "tp-link:blue:system",
++		.gpio		= TL_WR941ND_V6_GPIO_LED_SYSTEM,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button tl_wr941nd_v6_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR941ND_V6_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "RFKILL button",
++		.type		= EV_KEY,
++		.code		= KEY_RFKILL,
++		.debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TL_WR941ND_V6_GPIO_BTN_RFKILL,
++		.active_low	= 1,
++	}
++};
++
++
++static const char *tl_wr941n_v6_part_probes[] = {
++	"tp-link",
++	NULL,
++};
++
++static struct flash_platform_data tl_wr941n_v6_flash_data = {
++	.part_probes	= tl_wr941n_v6_part_probes,
++};
++
++
++static void __init tl_wr941nd_v6_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(&tl_wr941n_v6_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_v6_leds_gpio),
++				 tl_wr941nd_v6_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WR941ND_V6_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wr941nd_v6_gpio_keys),
++					tl_wr941nd_v6_gpio_keys);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
++
++	ath79_switch_data.phy4_mii_en = 1;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, mac);
++
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WR941ND_V6, "TL-WR941ND-v6", "TP-LINK TL-WR941N/ND v6",
++	     tl_wr941nd_v6_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-tube2h.c linux-4.1.13/arch/mips/ath79/mach-tube2h.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-tube2h.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-tube2h.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,118 @@
++/*
++ *  ALFA NETWORK Tube2H board support
++ *
++ *  Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define TUBE2H_GPIO_LED_SIGNAL4		0
++#define TUBE2H_GPIO_LED_SIGNAL3		1
++#define TUBE2H_GPIO_LED_SIGNAL2		13
++#define TUBE2H_GPIO_LED_LAN		17
++#define TUBE2H_GPIO_LED_SIGNAL1		27
++#define TUBE2H_GPIO_EXT_LNA		28
++
++#define TUBE2H_GPIO_BTN_RESET		12
++
++#define TUBE2H_KEYS_POLL_INTERVAL	20	/* msecs */
++#define TUBE2H_KEYS_DEBOUNCE_INTERVAL	(3 * TUBE2H_KEYS_POLL_INTERVAL)
++
++#define TUBE2H_ART_ADDRESS		0x1f7f0000
++#define TUBE2H_LAN_MAC_OFFSET		0x06
++#define TUBE2H_CALDATA_OFFSET		0x1000
++
++static struct gpio_led tube2h_leds_gpio[] __initdata = {
++	{
++		.name		= "alfa:blue:lan",
++		.gpio		= TUBE2H_GPIO_LED_LAN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "alfa:red:signal1",
++		.gpio		= TUBE2H_GPIO_LED_SIGNAL1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "alfa:orange:signal2",
++		.gpio		= TUBE2H_GPIO_LED_SIGNAL2,
++		.active_low	= 0,
++	},
++	{
++		.name		= "alfa:green:signal3",
++		.gpio		= TUBE2H_GPIO_LED_SIGNAL3,
++		.active_low	= 0,
++	},
++	{
++		.name		= "alfa:green:signal4",
++		.gpio		= TUBE2H_GPIO_LED_SIGNAL4,
++		.active_low	= 0,
++	},
++};
++
++static struct gpio_keys_button tube2h_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = TUBE2H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= TUBE2H_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static void __init tube2h_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(TUBE2H_ART_ADDRESS);
++	u32 t;
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_JTAG_DISABLE |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	/* Ensure that GPIO26 and GPIO27 are controllable by software */
++	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
++	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
++
++	gpio_request_one(TUBE2H_GPIO_EXT_LNA,
++			GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			"external LNA0");
++
++	ath79_register_wmac(art + TUBE2H_CALDATA_OFFSET, NULL);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tube2h_leds_gpio),
++				 tube2h_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, TUBE2H_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tube2h_gpio_keys),
++					tube2h_gpio_keys);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       art + TUBE2H_LAN_MAC_OFFSET, 0);
++	ath79_register_mdio(0, 0x0);
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_TUBE2H, "TUBE2H", "ALFA NETWORK Tube2H",
++	     tube2h_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/machtypes.h linux-4.1.13/arch/mips/ath79/machtypes.h
+--- linux-4.1.13.orig/arch/mips/ath79/machtypes.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/machtypes.h	2015-12-04 19:57:05.957975089 +0100
+@@ -16,12 +16,224 @@
+ 
+ enum ath79_mach_type {
+ 	ATH79_MACH_GENERIC = 0,
++	ATH79_MACH_ALFA_AP96,		/* ALFA Network AP96 board */
++	ATH79_MACH_ALFA_NX,		/* ALFA Network N2/N5 board */
++	ATH79_MACH_ALL0258N,		/* Allnet ALL0258N */
++	ATH79_MACH_ALL0305,		/* Allnet ALL0305 */
++	ATH79_MACH_ALL0315N,		/* Allnet ALL0315N */
++	ATH79_MACH_ANTMINER_S1,	/* Antminer S1 */
++	ATH79_MACH_ANTMINER_S3,	/* Antminer S3 */
++	ATH79_MACH_ARDUINO_YUN,		/* Yun */
++	ATH79_MACH_AP113,		/* Atheros AP113 reference board */
+ 	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
++	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
++	ATH79_MACH_AP132,		/* Atheros AP132 reference board */
++	ATH79_MACH_AP135_020,		/* Atheros AP135-020 reference board */
+ 	ATH79_MACH_AP136_010,		/* Atheros AP136-010 reference board */
++	ATH79_MACH_AP136_020,		/* Atheros AP136-020 reference board */
++	ATH79_MACH_AP143,		/* Atheros AP143 reference board */
++	ATH79_MACH_AP147_010,		/* Atheros AP147-010 reference board */
++	ATH79_MACH_AP152,		/* Atheros AP152 reference board */
+ 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
++	ATH79_MACH_AP83,		/* Atheros AP83 */
++	ATH79_MACH_AP96,		/* Atheros AP96 */
++	ATH79_MACH_ARCHER_C5,		/* TP-LINK Archer C5 board */
++	ATH79_MACH_ARCHER_C7,		/* TP-LINK Archer C7 board */
++	ATH79_MACH_AW_NR580,		/* AzureWave AW-NR580 */
++	ATH79_MACH_BHU_BXU2000N2_A1,	/* BHU BXU2000n-2 A1 */
++	ATH79_MACH_BSB,			/* Smart Electronics Black Swift board */
++	ATH79_MACH_CAP4200AG,		/* Senao CAP4200AG */
++	ATH79_MACH_CARAMBOLA2,		/* 8devices Carambola2 */
++	ATH79_MACH_CF_E316N_V2,		/* COMFAST CF-E316N v2 */
++	ATH79_MACH_CPE510,		/* TP-LINK CPE510 */
+ 	ATH79_MACH_DB120,		/* Atheros DB120 reference board */
+ 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
++	ATH79_MACH_DGL_5500_A1,		/* D-link DGL-5500 rev. A1 */
++	ATH79_MACH_DHP_1565_A1,		/* D-Link DHP-1565 rev. A1 */
++	ATH79_MACH_DIR_505_A1,		/* D-Link DIR-505 rev. A1 */
++	ATH79_MACH_DIR_600_A1,		/* D-Link DIR-600 rev. A1 */
++	ATH79_MACH_DIR_615_C1,		/* D-Link DIR-615 rev. C1 */
++	ATH79_MACH_DIR_615_E1,		/* D-Link DIR-615 rev. E1 */
++	ATH79_MACH_DIR_615_E4,		/* D-Link DIR-615 rev. E4 */
++	ATH79_MACH_DIR_615_I1,		/* D-Link DIR-615 rev. I1 */
++	ATH79_MACH_DIR_825_B1,		/* D-Link DIR-825 rev. B1 */
++	ATH79_MACH_DIR_825_C1,		/* D-Link DIR-825 rev. C1 */
++	ATH79_MACH_DIR_835_A1,		/* D-Link DIR-835 rev. A1 */
++	ATH79_MACH_DLAN_HOTSPOT,	/* devolo dLAN Hotspot */
++	ATH79_MACH_DLAN_PRO_500_WP,	/* devolo dLAN pro 500 Wireless+ */
++	ATH79_MACH_DLAN_PRO_1200_AC,	/* devolo dLAN pro 1200+ WiFi ac*/
++	ATH79_MACH_DRAGINO2,		/* Dragino Version 2 */
++	ATH79_MACH_ESR900,		/* EnGenius ESR900 */
++	ATH79_MACH_EW_DORIN,		/* embedded wireless Dorin Platform */
++	ATH79_MACH_EW_DORIN_ROUTER,	/* embedded wireless Dorin Router Platform */
++	ATH79_MACH_EAP300V2,		/* EnGenius EAP300 v2 */
++	ATH79_MACH_EAP7660D,		/* Senao EAP7660D */
++	ATH79_MACH_EL_M150,		/* EasyLink EL-M150 */
++	ATH79_MACH_EL_MINI,		/* EasyLink EL-MINI */
++	ATH79_MACH_ESR1750,		/* EnGenius ESR1750 */
++	ATH79_MACH_EPG5000,		/* EnGenius EPG5000 */
++	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
++	ATH79_MACH_GL_AR150,    /* GL-AR150 support */
++	ATH79_MACH_GL_AR300,		/* GL-AR300 */
++	ATH79_MACH_GL_DOMINO,		/* Domino */
++	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
++	ATH79_MACH_GS_MINIBOX_V1,	/* Gainstrong MiniBox V1.0 */
++	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */
++	ATH79_MACH_HIWIFI_HC6361,	/* HiWiFi HC6361 */
++	ATH79_MACH_JA76PF,		/* jjPlus JA76PF */
++	ATH79_MACH_JA76PF2,		/* jjPlus JA76PF2 */
++	ATH79_MACH_JWAP003,		/* jjPlus JWAP003 */
++	ATH79_MACH_HORNET_UB,		/* ALFA Networks Hornet-UB */
++	ATH79_MACH_MR12,		/* Cisco Meraki MR12 */
++	ATH79_MACH_MR16,		/* Cisco Meraki MR16 */
++	ATH79_MACH_MR1750,		/* OpenMesh MR1750 */
++	ATH79_MACH_MR600V2,		/* OpenMesh MR600v2 */
++	ATH79_MACH_MR600,		/* OpenMesh MR600 */
++	ATH79_MACH_MR900,		/* OpenMesh MR900 */
++	ATH79_MACH_MR900v2,		/* OpenMesh MR900v2 */
++	ATH79_MACH_MYNET_N600,		/* WD My Net N600 */
++	ATH79_MACH_MYNET_N750,		/* WD My Net N750 */
++	ATH79_MACH_MYNET_REXT,		/* WD My Net Wi-Fi Range Extender */
++	ATH79_MACH_MZK_W04NU,		/* Planex MZK-W04NU */
++	ATH79_MACH_MZK_W300NH,		/* Planex MZK-W300NH */
++	ATH79_MACH_NBG460N,		/* Zyxel NBG460N/550N/550NH */
++	ATH79_MACH_NBG6616,		/* Zyxel NBG6616 */
++	ATH79_MACH_NBG6716,		/* Zyxel NBG6716 */
++	ATH79_MACH_OM2P_HSv2,		/* OpenMesh OM2P-HSv2 */
++	ATH79_MACH_OM2P_HS,		/* OpenMesh OM2P-HS */
++	ATH79_MACH_OM2P_LC,		/* OpenMesh OM2P-LC */
++	ATH79_MACH_OM2Pv2,		/* OpenMesh OM2Pv2 */
++	ATH79_MACH_OM2P,		/* OpenMesh OM2P */
++	ATH79_MACH_OM5P_AN,		/* OpenMesh OM5P-AN */
++	ATH79_MACH_OM5P,		/* OpenMesh OM5P */
++	ATH79_MACH_ONION_OMEGA,		/* ONION OMEGA */
++	ATH79_MACH_PB42,		/* Atheros PB42 */
++	ATH79_MACH_PB92,		/* Atheros PB92 */
++	ATH79_MACH_QIHOO_C301,		/* Qihoo 360 C301 */
++	ATH79_MACH_R6100,		/* NETGEAR R6100 */
++	ATH79_MACH_RB_411,		/* MikroTik RouterBOARD 411/411A/411AH */
++	ATH79_MACH_RB_411U,		/* MikroTik RouterBOARD 411U */
++	ATH79_MACH_RB_433,		/* MikroTik RouterBOARD 433/433AH */
++	ATH79_MACH_RB_433U,		/* MikroTik RouterBOARD 433UAH */
++	ATH79_MACH_RB_435G,		/* MikroTik RouterBOARD 435G */
++	ATH79_MACH_RB_450G,		/* MikroTik RouterBOARD 450G */
++	ATH79_MACH_RB_450,		/* MikroTik RouterBOARD 450 */
++	ATH79_MACH_RB_493,		/* Mikrotik RouterBOARD 493/493AH */
++	ATH79_MACH_RB_493G,		/* Mikrotik RouterBOARD 493G */
++	ATH79_MACH_RB_711GR100,		/* Mikrotik RouterBOARD 911/912 boards */
++	ATH79_MACH_RB_750,		/* MikroTik RouterBOARD 750 */
++	ATH79_MACH_RB_750G_R3,		/* MikroTik RouterBOARD 750GL */
++	ATH79_MACH_RB_751,		/* MikroTik RouterBOARD 751 */
++	ATH79_MACH_RB_751G,		/* Mikrotik RouterBOARD 751G */
++	ATH79_MACH_RB_922GS,		/* Mikrotik RouterBOARD 911/922GS boards */
++	ATH79_MACH_RB_951G,		/* Mikrotik RouterBOARD 951G */
++	ATH79_MACH_RB_951U,		/* Mikrotik RouterBOARD 951Ui-2HnD */
++	ATH79_MACH_RB_2011G,		/* Mikrotik RouterBOARD 2011UAS-2HnD */
++	ATH79_MACH_RB_2011L,		/* Mikrotik RouterBOARD 2011L */
++	ATH79_MACH_RB_2011US,		/* Mikrotik RouterBOARD 2011UAS */
++	ATH79_MACH_RB_2011R5,		/* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
++	ATH79_MACH_RB_SXTLITE2ND,	/* Mikrotik RouterBOARD SXT Lite 2nD */
++	ATH79_MACH_RB_SXTLITE5ND,	/* Mikrotik RouterBOARD SXT Lite 5nD */
++	ATH79_MACH_RW2458N,		/* Redwave RW2458N */
++	ATH79_MACH_SMART_300,		/* NC-LINK SMART-300 */
++	ATH79_MACH_TEW_632BRP,		/* TRENDnet TEW-632BRP */
++	ATH79_MACH_TEW_673GRU,		/* TRENDnet TEW-673GRU */
++	ATH79_MACH_TEW_712BR,		/* TRENDnet TEW-712BR */
++	ATH79_MACH_TEW_732BR,		/* TRENDnet TEW-732BR */
++	ATH79_MACH_MC_MAC1200R,		/* MERCURY MAC1200R*/
++	ATH79_MACH_TL_MR10U,		/* TP-LINK TL-MR10U */
++	ATH79_MACH_TL_MR11U,		/* TP-LINK TL-MR11U */
++	ATH79_MACH_TL_MR13U,		/* TP-LINK TL-MR13U */
++	ATH79_MACH_TL_MR3020,		/* TP-LINK TL-MR3020 */
++	ATH79_MACH_TL_MR3040,		/* TP-LINK TL-MR3040 */
++	ATH79_MACH_TL_MR3040_V2,	/* TP-LINK TL-MR3040 v2 */
++	ATH79_MACH_TL_MR3220,		/* TP-LINK TL-MR3220 */
++	ATH79_MACH_TL_MR3220_V2,	/* TP-LINK TL-MR3220 v2 */
++	ATH79_MACH_TL_MR3420,		/* TP-LINK TL-MR3420 */
++	ATH79_MACH_TL_MR3420_V2,	/* TP-LINK TL-MR3420 v2 */
++	ATH79_MACH_TL_WA701ND_V2,       /* TP-LINK TL-WA701ND v2 */
++	ATH79_MACH_TL_WA750RE,		/* TP-LINK TL-WA750RE */
++       ATH79_MACH_TL_WA7210N_V2,       /* TP-LINK TL-WA7210N v2 */
++	ATH79_MACH_TL_WA7510N_V1,	/* TP-LINK TL-WA7510N v1*/
++	ATH79_MACH_TL_WA850RE,		/* TP-LINK TL-WA850RE */
++	ATH79_MACH_TL_WA860RE,		/* TP-LINK TL-WA860RE */
++	ATH79_MACH_TL_WA801ND_V2,	/* TP-LINK TL-WA801ND v2 */
++	ATH79_MACH_TL_WA830RE_V2,	/* TP-LINK TL-WA830RE v2 */
++	ATH79_MACH_TL_WA901ND,		/* TP-LINK TL-WA901ND */
++	ATH79_MACH_TL_WA901ND_V2,	/* TP-LINK TL-WA901ND v2 */
++	ATH79_MACH_TL_WA901ND_V3,	/* TP-LINK TL-WA901ND v3 */
++	ATH79_MACH_TL_WDR3320_V2,	/* TP-LINK TL-WDR3320 v2 */
++	ATH79_MACH_TL_WDR3500,		/* TP-LINK TL-WDR3500 */
++	ATH79_MACH_TL_WDR4300,		/* TP-LINK TL-WDR4300 */
++	ATH79_MACH_TL_WDR6500_V2,	/* TP-LINK TL-WDR6500 v2 */
++	ATH79_MACH_TL_WDR4900_V2,	/* TP-LINK TL-WDR4900 v2 */
++	ATH79_MACH_TL_WR1041N_V2,	/* TP-LINK TL-WR1041N v2 */
++	ATH79_MACH_TL_WR1043ND,		/* TP-LINK TL-WR1043ND */
++	ATH79_MACH_TL_WR1043ND_V2,	/* TP-LINK TL-WR1043ND v2 */
++	ATH79_MACH_TL_WR2543N,		/* TP-LINK TL-WR2543N/ND */
++	ATH79_MACH_TL_WR703N,		/* TP-LINK TL-WR703N */
++	ATH79_MACH_TL_WR710N,		/* TP-LINK TL-WR710N */
++	ATH79_MACH_TL_WR720N_V3,	/* TP-LINK TL-WR720N v3/v4 */
++	ATH79_MACH_TL_WR741ND,		/* TP-LINK TL-WR741ND */
++	ATH79_MACH_TL_WR741ND_V4,	/* TP-LINK TL-WR741ND  v4*/
++	ATH79_MACH_TL_WR841N_V1,	/* TP-LINK TL-WR841N v1 */
++	ATH79_MACH_TL_WR841N_V7,	/* TP-LINK TL-WR841N/ND v7 */
++	ATH79_MACH_TL_WR841N_V8,	/* TP-LINK TL-WR841N/ND v8 */
++	ATH79_MACH_TL_WR841N_V9,	/* TP-LINK TL-WR841N/ND v9 */
++	ATH79_MACH_TL_WR842N_V2,	/* TP-LINK TL-WR842N/ND v2 */
++	ATH79_MACH_TL_WR941ND,		/* TP-LINK TL-WR941ND */
++	ATH79_MACH_TL_WR941ND_V5,	/* TP-LINK TL-WR941ND v5 */
++	ATH79_MACH_TL_WR941ND_V6,	/* TP-LINK TL-WR941ND v6 */
++	ATH79_MACH_TUBE2H,		/* Alfa Network Tube2H */
++	ATH79_MACH_UBNT_AIRGW,		/* Ubiquiti AirGateway */
++	ATH79_MACH_UBNT_AIRGWP,		/* Ubiquiti AirGateway Pro */
++	ATH79_MACH_UBNT_AIRROUTER,	/* Ubiquiti AirRouter */
++	ATH79_MACH_UBNT_BULLET_M,	/* Ubiquiti Bullet M */
++	ATH79_MACH_UBNT_LOCO_M_XW, 	/* Ubiquiti Loco M XW */
++	ATH79_MACH_UBNT_LSSR71,		/* Ubiquiti LS-SR71 */
++	ATH79_MACH_UBNT_LSX,		/* Ubiquiti LSX */
++	ATH79_MACH_UBNT_NANO_M, 	/* Ubiquiti NanoStation M */
++	ATH79_MACH_UBNT_NANO_M_XW, 	/* Ubiquiti NanoStation M XW */
++	ATH79_MACH_UBNT_ROCKET_M,	/* Ubiquiti Rocket M */
++	ATH79_MACH_UBNT_ROCKET_M_XW,	/* Ubiquiti Rocket M XW*/
++	ATH79_MACH_UBNT_ROCKET_M_TI,	/* Ubiquiti Rocket M TI*/
++	ATH79_MACH_UBNT_RSPRO,		/* Ubiquiti RouterStation Pro */
++	ATH79_MACH_UBNT_RS,		/* Ubiquiti RouterStation */
++	ATH79_MACH_UBNT_UAP_PRO,	/* Ubiquiti UniFi AP Pro */
++	ATH79_MACH_UBNT_UNIFI, 		/* Ubiquiti Unifi */
++	ATH79_MACH_UBNT_UNIFI_OUTDOOR,	/* Ubiquiti UnifiAP Outdoor */
++	ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
+ 	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
++	ATH79_MACH_WEIO,			/* WeIO board */
++	ATH79_MACH_WHR_G301N,		/* Buffalo WHR-G301N */
++	ATH79_MACH_WHR_HP_G300N,	/* Buffalo WHR-HP-G300N */
++	ATH79_MACH_WHR_HP_GN,		/* Buffalo WHR-HP-GN */
++	ATH79_MACH_WLAE_AG300N,		/* Buffalo WLAE-AG300N */
++	ATH79_MACH_WLR8100,		/* SITECOM WLR-8100 */
++	ATH79_MACH_WNDAP360,		/* NETGEAR WNDAP360 */
++	ATH79_MACH_WNDR3700,		/* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
++	ATH79_MACH_WNDR3700_V4,		/* NETGEAR WNDR3700v4 */
++	ATH79_MACH_WNDR4300,		/* NETGEAR WNDR4300 */
++	ATH79_MACH_WNR2000,		/* NETGEAR WNR2000 */
++	ATH79_MACH_WNR2000_V3,		/* NETGEAR WNR2000 v3 */
++	ATH79_MACH_WNR2000_V4,		/* NETGEAR WNR2000 v4 */
++	ATH79_MACH_WNR2200,		/* NETGEAR WNR2200 */
++	ATH79_MACH_WNR612_V2,		/* NETGEAR WNR612 v2 */
++	ATH79_MACH_WNR1000_V2,		/* NETGEAR WNR1000 v2 */
++	ATH79_MACH_WP543,		/* Compex WP543 */
++	ATH79_MACH_WPE72,		/* Compex WPE72 */
++	ATH79_MACH_WPJ344,		/* Compex WPJ344 */
++	ATH79_MACH_WPJ531,		/* Compex WPJ531 */
++	ATH79_MACH_WPJ558,		/* Compex WPJ558 */
++	ATH79_MACH_WRT160NL,		/* Linksys WRT160NL */
++	ATH79_MACH_WRT400N,		/* Linksys WRT400N */
++	ATH79_MACH_WZR_HP_AG300H,	/* Buffalo WZR-HP-AG300H */
++	ATH79_MACH_WZR_HP_G300NH,	/* Buffalo WZR-HP-G300NH */
++	ATH79_MACH_WZR_HP_G300NH2,	/* Buffalo WZR-HP-G300NH2 */
++	ATH79_MACH_WZR_HP_G450H,	/* Buffalo WZR-HP-G450H */
++	ATH79_MACH_WZR_450HP2,		/* Buffalo WZR-450HP2 */
++	ATH79_MACH_ZCN_1523H_2,		/* Zcomax ZCN-1523H-2-xx */
++	ATH79_MACH_ZCN_1523H_5,		/* Zcomax ZCN-1523H-5-xx */
+ };
+ 
+ #endif /* _ATH79_MACHTYPE_H */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ubnt.c linux-4.1.13/arch/mips/ath79/mach-ubnt.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ubnt.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ubnt.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,205 @@
++/*
++ *  Ubiquiti RouterStation support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *  Copyright (C) 2008 Ubiquiti <support@ubnt.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define UBNT_RS_GPIO_LED_RF	2
++#define UBNT_RS_GPIO_SW4	8
++
++#define UBNT_LS_SR71_GPIO_LED_D25	0
++#define UBNT_LS_SR71_GPIO_LED_D26	1
++#define UBNT_LS_SR71_GPIO_LED_D24	2
++#define UBNT_LS_SR71_GPIO_LED_D23	4
++#define UBNT_LS_SR71_GPIO_LED_D22	5
++#define UBNT_LS_SR71_GPIO_LED_D27	6
++#define UBNT_LS_SR71_GPIO_LED_D28	7
++
++#define UBNT_KEYS_POLL_INTERVAL		20	/* msecs */
++#define UBNT_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_KEYS_POLL_INTERVAL)
++
++static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:green:rf",
++		.gpio		= UBNT_RS_GPIO_LED_RF,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:green:d22",
++		.gpio		= UBNT_LS_SR71_GPIO_LED_D22,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:d23",
++		.gpio		= UBNT_LS_SR71_GPIO_LED_D23,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:d24",
++		.gpio		= UBNT_LS_SR71_GPIO_LED_D24,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:red:d25",
++		.gpio		= UBNT_LS_SR71_GPIO_LED_D25,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:red:d26",
++		.gpio		= UBNT_LS_SR71_GPIO_LED_D26,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:d27",
++		.gpio		= UBNT_LS_SR71_GPIO_LED_D27,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:d28",
++		.gpio		= UBNT_LS_SR71_GPIO_LED_D28,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button ubnt_gpio_keys[] __initdata = {
++	{
++		.desc		= "sw4",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= UBNT_RS_GPIO_SW4,
++		.active_low	= 1,
++	}
++};
++
++static const char *ubnt_part_probes[] = {
++	"RedBoot",
++	NULL,
++};
++
++static struct flash_platform_data ubnt_flash_data = {
++	.part_probes	= ubnt_part_probes,
++};
++
++static void __init ubnt_generic_setup(void)
++{
++	ath79_register_m25p80(&ubnt_flash_data);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ubnt_gpio_keys),
++					ubnt_gpio_keys);
++	ath79_register_pci();
++}
++
++#define UBNT_RS_WAN_PHYMASK	BIT(20)
++#define UBNT_RS_LAN_PHYMASK	(BIT(16) | BIT(17) | BIT(18) | BIT(19))
++
++static void __init ubnt_rs_setup(void)
++{
++	ubnt_generic_setup();
++
++	ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
++
++	/*
++	 * There is Secondary MAC address duplicate problem with some
++	 * UBNT HW batches.  Do not increase Secondary MAC address by 1
++	 * but do workaround with 'Locally Administrated' bit.
++	 */
++	ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.speed = SPEED_100;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_usb();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
++				 ubnt_rs_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
++	     ubnt_rs_setup);
++
++#define UBNT_RSPRO_WAN_PHYMASK	BIT(4)
++#define UBNT_RSPRO_LAN_PHYMASK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
++
++static void __init ubnt_rspro_setup(void)
++{
++	ubnt_generic_setup();
++
++	ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK |
++				 UBNT_RSPRO_LAN_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
++
++	/*
++	 * There is Secondary MAC address duplicate problem with some
++	 * UBNT HW batches.  Do not increase Secondary MAC address by 1
++	 * but do workaround with 'Locally Administrated' bit.
++	 */
++	ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_usb();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
++				 ubnt_rs_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
++	     ubnt_rspro_setup);
++
++static void __init ubnt_lsx_setup(void)
++{
++	ubnt_generic_setup();
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
++
++#define UBNT_LSSR71_PHY_MASK	BIT(1)
++
++static void __init ubnt_lssr71_setup(void)
++{
++	ubnt_generic_setup();
++
++	ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
++
++	ath79_register_eth(0);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
++				 ubnt_ls_sr71_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
++	     ubnt_lssr71_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-ubnt-xm.c linux-4.1.13/arch/mips/ath79/mach-ubnt-xm.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-ubnt-xm.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-ubnt-xm.c	2015-12-04 19:57:04.386077932 +0100
+@@ -12,15 +12,26 @@
+ 
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/etherdevice.h>
++#include <linux/ar8216_platform.h>
+ 
++#include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/irq.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
+ 
+-#include "machtypes.h"
++#include <linux/platform_data/phy-at803x.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
+-#include "pci.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
+ 
+ #define UBNT_XM_GPIO_LED_L1		0
+ #define UBNT_XM_GPIO_LED_L2		1
+@@ -32,23 +43,23 @@
+ #define UBNT_XM_KEYS_POLL_INTERVAL	20
+ #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_XM_KEYS_POLL_INTERVAL)
+ 
+-#define UBNT_XM_EEPROM_ADDR		(u8 *) KSEG1ADDR(0x1fff1000)
++#define UBNT_XM_EEPROM_ADDR		0x1fff1000
+ 
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ 	{
+-		.name		= "ubnt-xm:red:link1",
++		.name		= "ubnt:red:link1",
+ 		.gpio		= UBNT_XM_GPIO_LED_L1,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:orange:link2",
++		.name		= "ubnt:orange:link2",
+ 		.gpio		= UBNT_XM_GPIO_LED_L2,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:green:link3",
++		.name		= "ubnt:green:link3",
+ 		.gpio		= UBNT_XM_GPIO_LED_L3,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:green:link4",
++		.name		= "ubnt:green:link4",
+ 		.gpio		= UBNT_XM_GPIO_LED_L4,
+ 		.active_low	= 0,
+ 	},
+@@ -65,62 +76,625 @@
+ 	}
+ };
+ 
+-static struct spi_board_info ubnt_xm_spi_info[] = {
++#define UBNT_M_WAN_PHYMASK	BIT(4)
++
++static void __init ubnt_xm_init(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
++				 ubnt_xm_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ubnt_xm_gpio_keys),
++					ubnt_xm_gpio_keys);
++
++	ath79_register_m25p80(NULL);
++	ap91_pci_init(eeprom, NULL);
++
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_XM,
++	     "UBNT-XM",
++	     "Ubiquiti Networks XM (rev 1.0) board",
++	     ubnt_xm_init);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
++	     ubnt_xm_init);
++
++static void __init ubnt_rocket_m_setup(void)
++{
++	ubnt_xm_init();
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
++	     ubnt_rocket_m_setup);
++
++static void __init ubnt_nano_m_setup(void)
++{
++	ubnt_xm_init();
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
++	     ubnt_nano_m_setup);
++
++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
+ 	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "mx25l6405d",
++		.name		= "ubnt:green:globe",
++		.gpio		= 0,
++		.active_low	= 1,
++	}, {
++	        .name		= "ubnt:green:power",
++		.gpio		= 11,
++		.active_low	= 1,
++		.default_state  = LEDS_GPIO_DEFSTATE_ON,
+ 	}
+ };
+ 
+-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+-	.bus_num		= 0,
+-	.num_chipselect		= 1,
++static void __init ubnt_airrouter_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++	ath79_register_usb();
++
++	ap91_pci_init(ee, NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
++				 ubnt_airrouter_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
++	     ubnt_airrouter_setup);
++
++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:orange:dome",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:dome",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
+ };
+ 
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ubnt_xm_eeprom_data;
++static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:orange:front",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:front",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
+ 
+-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
++static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:white:front",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:blue:front",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
++
++
++static void __init ubnt_unifi_setup(void)
+ {
+-	switch (PCI_SLOT(dev->devfn)) {
+-	case 0:
+-		dev->dev.platform_data = &ubnt_xm_eeprom_data;
+-		break;
++	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_register_eth(0);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
++				 ubnt_unifi_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
++	     ubnt_unifi_setup);
++
++
++#define UBNT_UNIFIOD_PRI_PHYMASK	BIT(4)
++#define UBNT_UNIFIOD_2ND_PHYMASK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
++
++static void __init ubnt_unifi_outdoor_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++				 UBNT_UNIFIOD_2ND_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
++				 ubnt_unifi_outdoor_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
++	     "Ubiquiti UniFiAP Outdoor",
++	     ubnt_unifi_outdoor_setup);
++
++
++static void __init ubnt_unifi_outdoor_plus_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++				 UBNT_UNIFIOD_2ND_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
++				 ubnt_unifi_outdoor_plus_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
++	     "Ubiquiti UniFiAP Outdoor+",
++	     ubnt_unifi_outdoor_plus_setup);
++
++
++static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
++	{
++		.name		= "ubnt:white:dome",
++		.gpio		= 12,
++	}, {
++		.name		= "ubnt:blue:dome",
++		.gpio		= 13,
++	}
++};
++
++static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
++	{
++		.desc			= "reset",
++		.type			= EV_KEY,
++		.code			= KEY_RESTART,
++		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++		.gpio			= 17,
++		.active_low		= 1,
+ 	}
++};
++
++static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data uap_pro_ar8327_data = {
++	.pad0_cfg = &uap_pro_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info uap_pro_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &uap_pro_ar8327_data,
++	},
++};
++
++#define UAP_PRO_MAC0_OFFSET		0x0000
++#define UAP_PRO_MAC1_OFFSET		0x0006
++#define UAP_PRO_WMAC_CALDATA_OFFSET	0x1000
++#define UAP_PRO_PCI_CALDATA_OFFSET	0x5000
++
++static void __init ubnt_uap_pro_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
++				 ubnt_uap_pro_gpio_leds);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(uap_pro_gpio_keys),
++                                        uap_pro_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++	ath79_register_mdio(0, 0x0);
++	mdiobus_register_board_info(uap_pro_mdio0_info,
++				    ARRAY_SIZE(uap_pro_mdio0_info));
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	/* GMAC0 is connected to an AR8327 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
++	     ubnt_uap_pro_setup);
++
++#define UBNT_XW_GPIO_LED_L1		11
++#define UBNT_XW_GPIO_LED_L2		16
++#define UBNT_XW_GPIO_LED_L3		13
++#define UBNT_XW_GPIO_LED_L4		14
++
++static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:red:link1",
++		.gpio		= UBNT_XW_GPIO_LED_L1,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:orange:link2",
++		.gpio		= UBNT_XW_GPIO_LED_L2,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link3",
++		.gpio		= UBNT_XW_GPIO_LED_L3,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link4",
++		.gpio		= UBNT_XW_GPIO_LED_L4,
++		.active_low	= 1,
++	},
++};
++
++#define UBNT_ROCKET_TI_GPIO_LED_L1	16
++#define UBNT_ROCKET_TI_GPIO_LED_L2	17
++#define UBNT_ROCKET_TI_GPIO_LED_L3	18
++#define UBNT_ROCKET_TI_GPIO_LED_L4	19
++#define UBNT_ROCKET_TI_GPIO_LED_L5	20
++#define UBNT_ROCKET_TI_GPIO_LED_L6	21
++static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:green:link1",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L1,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link2",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L2,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link3",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L3,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link4",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L4,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:link5",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L5,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:link6",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L6,
++		.active_low	= 0,
++	},
++};
+ 
+-	return 0;
++static void __init ubnt_xw_init(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
++				 ubnt_xw_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ }
+ 
+-static void __init ubnt_xm_pci_init(void)
++static void __init ubnt_nano_m_xw_setup(void)
+ {
+-	memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+-	       sizeof(ubnt_xm_eeprom_data.eeprom_data));
++	ubnt_xw_init();
+ 
+-	ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+-	ath79_register_pci();
++	/* GMAC0 is connected to an AR8326 switch */
++	ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
++	ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_register_eth(0);
+ }
+-#else
+-static inline void ubnt_xm_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+ 
+-static void __init ubnt_xm_init(void)
++static void __init ubnt_loco_m_xw_setup(void)
+ {
+-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+-				 ubnt_xm_leds_gpio);
++	ubnt_xw_init();
+ 
++	ath79_register_mdio(0, ~BIT(1));
++	ath79_eth0_data.phy_mask = BIT(1);
++	ath79_register_eth(0);
++}
++
++static void __init ubnt_rocket_m_xw_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
++				 ubnt_xw_leds_gpio);
+ 	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+-					ARRAY_SIZE(ubnt_xm_gpio_keys),
+-					ubnt_xm_gpio_keys);
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
+ 
+-	ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+-			   ARRAY_SIZE(ubnt_xm_spi_info));
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
+ 
+-	ubnt_xm_pci_init();
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_register_mdio(0, ~BIT(4));
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
+ }
+ 
+-MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+-	     "UBNT-XM",
+-	     "Ubiquiti Networks XM (rev 1.0) board",
+-	     ubnt_xm_init);
++static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = {
++	.disable_smarteee = 1,
++	.enable_rgmii_rx_delay = 1,
++	.enable_rgmii_tx_delay = 1,
++};
++static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = {
++        {
++                .bus_id = "ag71xx-mdio.0",
++                .phy_addr = 4,
++                .platform_data = &ubnt_rocket_m_ti_at803_data,
++        },
++};
++
++static void __init ubnt_rocket_m_ti_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio),
++				 ubnt_rocket_ti_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++
++	ap91_pci_init(eeprom + 0x1000, NULL);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++	ath79_setup_ar934x_eth_rx_delay(3, 3);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr,
++		       eeprom + UAP_PRO_MAC1_OFFSET, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info,
++			ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info));
++	ath79_register_mdio(0, 0x0);
++
++
++	ath79_eth0_data.phy_mask = BIT(4);
++	/* read out from vendor */
++	ath79_eth0_pll_data.pll_1000 = 0x2000000;
++	ath79_eth0_pll_data.pll_10 = 0x1313;
++	ath79_register_eth(0);
++
++	ath79_register_mdio(1, 0x0);
++	ath79_eth1_data.phy_mask = BIT(3);
++	ath79_register_eth(1);
++}
++
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
++	     ubnt_nano_m_xw_setup);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
++	     ubnt_loco_m_xw_setup);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW",
++	     ubnt_rocket_m_xw_setup);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI",
++	     ubnt_rocket_m_ti_setup);
++
++static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
++	{
++		.name	   = "ubnt:blue:wlan",
++		.gpio	   = 0,
++	}, {
++		.name	   = "ubnt:white:status",
++		.gpio	   = 1,
++	},
++};
++
++static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 12,
++		.active_low	= 1,
++	}
++};
++
++static void __init ubnt_airgateway_setup(void)
++{
++	u32 t;
++	u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
++	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
++				 ubnt_airgateway_gpio_leds);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(airgateway_gpio_keys),
++					airgateway_gpio_keys);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
++	     ubnt_airgateway_setup);
++
++static struct gpio_led ubnt_airgateway_pro_gpio_leds[] __initdata = {
++	{
++		.name	   = "ubnt:blue:wlan",
++		.gpio	   = 13,
++	}, {
++		.name	   = "ubnt:white:status",
++		.gpio	   = 17,
++	},
++};
++
++
++static struct gpio_keys_button airgateway_pro_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 12,
++		.active_low	= 1,
++	}
++};
++
++static void __init ubnt_airgateway_pro_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_pro_gpio_leds),
++				 ubnt_airgateway_pro_gpio_leds);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(airgateway_pro_gpio_keys),
++					airgateway_pro_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_register_mdio(1, 0x0);
++
++	/* GMAC0 is left unused in this configuration */
++
++	/* GMAC1 is connected to MAC0 on the internal switch */
++	/* The PoE/WAN port connects to port 5 on the internal switch */
++	/* The LAN port connects to port 4 on the internal switch */
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRGWP, "UBNT-AGWP", "Ubiquiti AirGateway Pro",
++	     ubnt_airgateway_pro_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-weio.c linux-4.1.13/arch/mips/ath79/mach-weio.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-weio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-weio.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,140 @@
++/**
++ * WEIO Web Of Things Platform
++ *
++ * Copyright (C) 2013 Drasko DRASKOVIC and Uros PETREVSKI
++ *
++ *              ##      ## ######## ####  #######  
++ *              ##  ##  ## ##        ##  ##     ## 
++ *              ##  ##  ## ##        ##  ##     ## 
++ *              ##  ##  ## ######    ##  ##     ## 
++ *              ##  ##  ## ##        ##  ##     ## 
++ *              ##  ##  ## ##        ##  ##     ## 
++ *               ###  ###  ######## ####  #######
++ *
++ *                   Web Of Things Platform
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Authors : 
++ * Drasko DRASKOVIC <drasko.draskovic@gmail.com>
++ * Uros PETREVSKI <uros@nodesign.net>
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <linux/i2c-gpio.h>
++#include <linux/platform_device.h>
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WEIO_GPIO_LED_STA		1
++#define WEIO_GPIO_LED_AP		16
++
++#define WEIO_GPIO_BTN_AP		20
++#define WEIO_GPIO_BTN_RESET		23
++
++#define WEIO_KEYS_POLL_INTERVAL		20	/* msecs */
++#define WEIO_KEYS_DEBOUNCE_INTERVAL	(3 * WEIO_KEYS_POLL_INTERVAL)
++
++#define WEIO_MAC0_OFFSET			0x0000
++#define WEIO_MAC1_OFFSET			0x0006
++#define WEIO_CALDATA_OFFSET			0x1000
++#define WEIO_WMAC_MAC_OFFSET		0x1002
++
++static struct gpio_led weio_leds_gpio[] __initdata = {
++	{
++		.name		= "weio:green:sta",
++		.gpio		= WEIO_GPIO_LED_STA,
++		.active_low	= 1,
++		.default_state = LEDS_GPIO_DEFSTATE_ON,
++	},
++	{
++		.name		= "weio:green:ap",
++		.gpio		= WEIO_GPIO_LED_AP,
++		.active_low	= 1,
++		.default_state = LEDS_GPIO_DEFSTATE_ON,
++	}
++};
++
++static struct gpio_keys_button weio_gpio_keys[] __initdata = {
++	{
++		.desc		= "ap button",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = WEIO_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WEIO_GPIO_BTN_AP,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "soft-reset button",
++		.type		= EV_KEY,
++		.code		= BTN_1,
++		.debounce_interval = WEIO_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WEIO_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static struct i2c_gpio_platform_data weio_i2c_gpio_data = {
++	.sda_pin        = 18,
++	.scl_pin        = 19,
++};
++
++static struct platform_device weio_i2c_gpio = {
++	.name           = "i2c-gpio",
++	.id             = 0,
++	.dev            = {
++		.platform_data  = &weio_i2c_gpio_data,
++	},
++};
++
++static void __init weio_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_wmac(art + WEIO_CALDATA_OFFSET, art + WEIO_WMAC_MAC_OFFSET);
++}
++
++static void __init weio_setup(void)
++{
++	weio_common_setup();
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	platform_device_register(&weio_i2c_gpio);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(weio_leds_gpio),
++				weio_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WEIO_KEYS_POLL_INTERVAL,
++				ARRAY_SIZE(weio_gpio_keys),
++				weio_gpio_keys);
++
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_WEIO, "WEIO", "WeIO board", weio_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-whr-hp-g300n.c linux-4.1.13/arch/mips/ath79/mach-whr-hp-g300n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-whr-hp-g300n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-whr-hp-g300n.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,155 @@
++/*
++ *  Buffalo WHR-HP-G300N board support
++ *
++ *  based on ...
++ *
++ *  TP-LINK TL-WR741ND board support
++ *
++ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++
++#define WHRHPG300N_GPIO_LED_SECURITY		0
++#define WHRHPG300N_GPIO_LED_DIAG		1
++#define WHRHPG300N_GPIO_LED_ROUTER		6
++
++#define WHRHPG300N_GPIO_BTN_ROUTER_ON		7
++#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO		8
++#define WHRHPG300N_GPIO_BTN_RESET		11
++#define WHRHPG300N_GPIO_BTN_AOSS		12
++#define WHRHPG300N_GPIO_LED_LAN1		13
++#define WHRHPG300N_GPIO_LED_LAN2		14
++#define WHRHPG300N_GPIO_LED_LAN3		15
++#define WHRHPG300N_GPIO_LED_LAN4		16
++#define WHRHPG300N_GPIO_LED_WAN			17
++
++#define	WHRHPG300N_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
++
++#define WHRHPG300N_MAC_OFFSET		0x20c
++
++static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
++	{
++		.name		= "buffalo:orange:security",
++		.gpio		= WHRHPG300N_GPIO_LED_SECURITY,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:red:diag",
++		.gpio		= WHRHPG300N_GPIO_LED_DIAG,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:green:router",
++		.gpio		= WHRHPG300N_GPIO_LED_ROUTER,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:green:wan",
++		.gpio		= WHRHPG300N_GPIO_LED_WAN,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:green:lan1",
++		.gpio		= WHRHPG300N_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:green:lan2",
++		.gpio		= WHRHPG300N_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:green:lan3",
++		.gpio		= WHRHPG300N_GPIO_LED_LAN3,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:green:lan4",
++		.gpio		= WHRHPG300N_GPIO_LED_LAN4,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WHRHPG300N_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "aoss/wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.gpio		= WHRHPG300N_GPIO_BTN_AOSS,
++		.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
++		.active_low	= 1,
++	}, {
++		.desc		= "router_on",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.gpio		= WHRHPG300N_GPIO_BTN_ROUTER_ON,
++		.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
++		.active_low	= 1,
++	}, {
++		.desc		= "router_auto",
++		.type		= EV_KEY,
++		.code		= BTN_3,
++		.gpio		= WHRHPG300N_GPIO_BTN_ROUTER_AUTO,
++		.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
++		.active_low	= 1,
++	}
++};
++
++static void __init whrhpg300n_setup(void)
++{
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
++				 whrhpg300n_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(whrhpg300n_gpio_keys),
++					whrhpg300n_gpio_keys);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN ports */
++	ath79_register_eth(1);
++	/* WAN port */
++	ath79_register_eth(0);
++
++	ap9x_pci_setup_wmac_led_pin(0, 1);
++
++	ap91_pci_init(ee, mac);
++}
++
++MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N",
++	     whrhpg300n_setup);
++
++MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N",
++	     whrhpg300n_setup);
++
++MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN",
++	     whrhpg300n_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wlae-ag300n.c linux-4.1.13/arch/mips/ath79/mach-wlae-ag300n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wlae-ag300n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wlae-ag300n.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,114 @@
++/*
++ *  Buffalo WLAE-AG300N board support
++ */
++
++#include <linux/gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define WLAEAG300N_MAC_OFFSET		0x20c
++#define WLAEAG300N_KEYS_POLL_INTERVAL	20      /* msecs */
++#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL)
++
++
++static struct gpio_led wlaeag300n_leds_gpio[] __initdata = {
++	/*
++	 * Note: Writing 1 into GPIO 13 will power down the device.
++	 */
++	{
++		.name		= "buffalo:green:wireless",
++		.gpio		= 14,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:red:wireless",
++		.gpio		= 15,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:green:status",
++		.gpio		= 16,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:red:status",
++		.gpio		= 17,
++		.active_low	= 1,
++	}
++};
++
++
++static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = {
++	{
++		.desc		= "function",
++		.type		= EV_KEY,
++		.code		= KEY_MODE,
++		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 0,
++		.active_low	= 1,
++	}, {
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 1,
++		.active_low	= 1,
++	}, {
++		.desc		= "power",
++		.type		= EV_KEY,
++		.code		= KEY_POWER,
++		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 11,
++		.active_low	= 1,
++	}, {
++		.desc		= "aoss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 12,
++		.active_low	= 1,
++	}
++};
++
++static void __init wlaeag300n_setup(void)
++{
++	u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET;
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1);
++
++	ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_mask = BIT(0);
++
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = BIT(4);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio),
++					wlaeag300n_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(wlaeag300n_gpio_keys),
++					 wlaeag300n_gpio_keys);
++
++	ath79_register_m25p80(NULL);
++
++	ap91_pci_init(eeprom1, mac1);
++}
++
++MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N",
++	     "Buffalo WLAE-AG300N", wlaeag300n_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wlr8100.c linux-4.1.13/arch/mips/ath79/mach-wlr8100.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wlr8100.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wlr8100.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,206 @@
++/*
++ * Sitecom X8 AC1750 WLR-8100 board support
++ *
++ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
++ * Copyright (c) 2012 Qualcomm Atheros
++ * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WLR8100_GPIO_LED_USB		4
++#define WLR8100_GPIO_LED_WLAN_5G	12
++#define WLR8100_GPIO_LED_WLAN_2G	13
++#define WLR8100_GPIO_LED_STATUS_RED	14
++#define WLR8100_GPIO_LED_WPS_RED	15
++#define WLR8100_GPIO_LED_STATUS_AMBER	19
++#define WLR8100_GPIO_LED_WPS_GREEN	20
++
++#define WLR8100_GPIO_BTN_WPS		16
++#define WLR8100_GPIO_BTN_RFKILL		21
++
++#define WLR8100_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WLR8100_KEYS_DEBOUNCE_INTERVAL	(3 * WLR8100_KEYS_POLL_INTERVAL)
++
++#define WLR8100_MAC0_OFFSET		0
++#define WLR8100_MAC1_OFFSET		6
++#define WLR8100_WMAC_CALDATA_OFFSET	0x1000
++#define WLR8100_PCIE_CALDATA_OFFSET	0x5000
++
++static struct gpio_led wlr8100_leds_gpio[] __initdata = {
++	{
++		.name		= "wlr8100:amber:status",
++		.gpio		= WLR8100_GPIO_LED_STATUS_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wlr8100:red:status",
++		.gpio		= WLR8100_GPIO_LED_STATUS_RED,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wlr8100:green:wps",
++		.gpio		= WLR8100_GPIO_LED_WPS_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wlr8100:red:wps",
++		.gpio		= WLR8100_GPIO_LED_WPS_RED,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wlr8100:red:wlan-2g",
++		.gpio		= WLR8100_GPIO_LED_WLAN_2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wlr8100:red:usb",
++		.gpio		= WLR8100_GPIO_LED_USB,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button wlr8100_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WLR8100_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "RFKILL button",
++		.type		= EV_KEY,
++		.code		= KEY_RFKILL,
++		.debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WLR8100_GPIO_BTN_RFKILL,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg wlr8100_ar8327_pad0_cfg;
++static struct ar8327_pad_cfg wlr8100_ar8327_pad6_cfg;
++
++static struct ar8327_platform_data wlr8100_ar8327_data = {
++	.pad0_cfg = &wlr8100_ar8327_pad0_cfg,
++	.pad6_cfg = &wlr8100_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info wlr8100_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &wlr8100_ar8327_data,
++	},
++};
++
++static void __init wlr8100_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wlr8100_leds_gpio),
++				 wlr8100_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, WLR8100_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wlr8100_gpio_keys),
++					wlr8100_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_wmac(art + WLR8100_WMAC_CALDATA_OFFSET, NULL);
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + WLR8100_MAC0_OFFSET, 0);
++
++	mdiobus_register_board_info(wlr8100_mdio0_info,
++				    ARRAY_SIZE(wlr8100_mdio0_info));
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected tot eh SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(1);
++}
++
++static void __init wlr8100_010_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	/* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
++	wlr8100_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
++	wlr8100_ar8327_pad0_cfg.txclk_delay_en = true;
++	wlr8100_ar8327_pad0_cfg.rxclk_delay_en = true;
++	wlr8100_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++	wlr8100_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++	wlr8100_ar8327_pad0_cfg.mac06_exchange_en = true;
++
++	/* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
++	wlr8100_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
++	wlr8100_ar8327_pad6_cfg.rxclk_delay_en = true;
++	wlr8100_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
++
++	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	wlr8100_common_setup();
++	ap91_pci_init(art + WLR8100_PCIE_CALDATA_OFFSET, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_WLR8100, "WLR8100",
++	     "Sitecom WLR-8100",
++	     wlr8100_010_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wndap360.c linux-4.1.13/arch/mips/ath79/mach-wndap360.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wndap360.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wndap360.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,105 @@
++/*
++ *  Netgear WNDAP360 board support (proper leds / button support missing)
++ *
++ *  Based on AP96
++ *  Copyright (C) 2013 Jacek Kikiewicz
++ *  Copyright (C) 2009 Marco Porsch
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2010 Atheros Communications
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++
++#define WNDAP360_GPIO_LED_POWER_ORANGE		0
++#define WNDAP360_GPIO_LED_POWER_GREEN		2
++
++/* Reset button - next to the power connector */
++#define WNDAP360_GPIO_BTN_RESET			8
++
++#define WNDAP360_KEYS_POLL_INTERVAL		20	/* msecs */
++#define WNDAP360_KEYS_DEBOUNCE_INTERVAL	(3 * WNDAP360_KEYS_POLL_INTERVAL)
++
++#define WNDAP360_WMAC0_MAC_OFFSET		0x120c
++#define WNDAP360_WMAC1_MAC_OFFSET		0x520c
++#define WNDAP360_CALDATA0_OFFSET		0x1000
++#define WNDAP360_CALDATA1_OFFSET		0x5000
++
++/*
++ * WNDAP360 this still uses leds definitions from AP96
++ *
++ */
++static struct gpio_led wndap360_leds_gpio[] __initdata = {
++	{
++		.name		= "netgear:green:power",
++		.gpio		= WNDAP360_GPIO_LED_POWER_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:orange:power",
++		.gpio		= WNDAP360_GPIO_LED_POWER_ORANGE,
++		.active_low	= 1,
++        }
++};
++
++static struct gpio_keys_button wndap360_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WNDAP360_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNDAP360_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++#define WNDAP360_LAN_PHYMASK 0x0f
++
++static void __init wndap360_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK));
++
++	/* Reusing wifi MAC with offset of 1 as eth0 MAC */
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       art + WNDAP360_WMAC0_MAC_OFFSET, 1);
++	ath79_eth0_pll_data.pll_1000 = 0x11110000;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio),
++					wndap360_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WNDAP360_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(wndap360_gpio_keys),
++					 wndap360_gpio_keys);
++
++	ap9x_pci_setup_wmac_led_pin(0, 5);
++	ap9x_pci_setup_wmac_led_pin(1, 5);
++
++	ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET,
++		      art + WNDAP360_WMAC0_MAC_OFFSET,
++		      art + WNDAP360_CALDATA1_OFFSET,
++		      art + WNDAP360_WMAC1_MAC_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_WNDAP360, "WNDAP360", "Netgear WNDAP360", wndap360_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wndr3700.c linux-4.1.13/arch/mips/ath79/mach-wndr3700.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wndr3700.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wndr3700.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,172 @@
++/*
++ *  Netgear WNDR3700 board support
++ *
++ *  Copyright (C) 2009 Marco Porsch
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/delay.h>
++#include <linux/rtl8366.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define WNDR3700_GPIO_LED_WPS_ORANGE	0
++#define WNDR3700_GPIO_LED_POWER_ORANGE	1
++#define WNDR3700_GPIO_LED_POWER_GREEN	2
++#define WNDR3700_GPIO_LED_WPS_GREEN	4
++#define WNDR3700_GPIO_LED_WAN_GREEN	6
++
++#define WNDR3700_GPIO_BTN_WPS		3
++#define WNDR3700_GPIO_BTN_RESET		8
++#define WNDR3700_GPIO_BTN_WIFI		11
++
++#define WNDR3700_GPIO_RTL8366_SDA	5
++#define WNDR3700_GPIO_RTL8366_SCK	7
++
++#define WNDR3700_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL)
++
++#define WNDR3700_ETH0_MAC_OFFSET	0
++#define WNDR3700_ETH1_MAC_OFFSET	0x6
++
++#define WNDR3700_WMAC0_MAC_OFFSET	0
++#define WNDR3700_WMAC1_MAC_OFFSET	0xc
++#define WNDR3700_CALDATA0_OFFSET	0x1000
++#define WNDR3700_CALDATA1_OFFSET	0x5000
++
++static struct gpio_led wndr3700_leds_gpio[] __initdata = {
++	{
++		.name		= "netgear:green:power",
++		.gpio		= WNDR3700_GPIO_LED_POWER_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:orange:power",
++		.gpio		= WNDR3700_GPIO_LED_POWER_ORANGE,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:wps",
++		.gpio		= WNDR3700_GPIO_LED_WPS_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:orange:wps",
++		.gpio		= WNDR3700_GPIO_LED_WPS_ORANGE,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:wan",
++		.gpio		= WNDR3700_GPIO_LED_WAN_GREEN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNDR3700_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNDR3700_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}, {
++		.desc		= "wifi",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNDR3700_GPIO_BTN_WIFI,
++		.active_low	= 1,
++	}
++};
++
++static struct rtl8366_platform_data wndr3700_rtl8366s_data = {
++	.gpio_sda	= WNDR3700_GPIO_RTL8366_SDA,
++	.gpio_sck	= WNDR3700_GPIO_RTL8366_SCK,
++};
++
++static struct platform_device wndr3700_rtl8366s_device = {
++	.name		= RTL8366S_DRIVER_NAME,
++	.id		= -1,
++	.dev = {
++		.platform_data	= &wndr3700_rtl8366s_data,
++	}
++};
++
++static void __init wndr3700_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	/*
++	 * The eth0 and wmac0 interfaces share the same MAC address which
++	 * can lead to problems if operated unbridged. Set the locally
++	 * administered bit on the eth0 MAC to make it unique.
++	 */
++	ath79_init_local_mac(ath79_eth0_data.mac_addr,
++			     art + WNDR3700_ETH0_MAC_OFFSET);
++	ath79_eth0_pll_data.pll_1000 = 0x11110000;
++	ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr,
++			art + WNDR3700_ETH1_MAC_OFFSET, 0);
++	ath79_eth1_pll_data.pll_1000 = 0x11110000;
++	ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_usb();
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
++				 wndr3700_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wndr3700_gpio_keys),
++					wndr3700_gpio_keys);
++
++	platform_device_register(&wndr3700_rtl8366s_device);
++	platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
++
++	ap9x_pci_setup_wmac_led_pin(0, 5);
++	ap9x_pci_setup_wmac_led_pin(1, 5);
++
++	/* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */
++	ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6));
++
++	/* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */
++	ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6));
++
++	ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
++		      art + WNDR3700_WMAC0_MAC_OFFSET,
++		      art + WNDR3700_CALDATA1_OFFSET,
++		      art + WNDR3700_WMAC1_MAC_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700",
++	     "NETGEAR WNDR3700/WNDR3800/WNDRMAC",
++	     wndr3700_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wndr4300.c linux-4.1.13/arch/mips/ath79/mach-wndr4300.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wndr4300.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wndr4300.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,210 @@
++/*
++ *  NETGEAR WNDR3700v4/WNDR4300 board support
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2014 Ralph Perlich <rpsoft@arcor.de>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/platform/ar934x_nfc.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-nfc.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++/* AR9344 GPIOs */
++#define WNDR4300_GPIO_LED_POWER_GREEN	0
++#define WNDR4300_GPIO_LED_POWER_AMBER	2
++#define WNDR4300_GPIO_LED_USB		13
++#define WNDR4300_GPIO_LED_WAN_GREEN	1
++#define WNDR4300_GPIO_LED_WAN_AMBER	3
++#define WNDR4300_GPIO_LED_WLAN2G	11
++#define WNDR4300_GPIO_LED_WLAN5G	14
++#define WNDR4300_GPIO_LED_WPS_GREEN	16
++#define WNDR4300_GPIO_LED_WPS_AMBER	17
++
++#define WNDR4300_GPIO_BTN_RESET		21
++#define WNDR4300_GPIO_BTN_WIRELESS	15
++#define WNDR4300_GPIO_BTN_WPS		12
++
++/* AR9580 GPIOs */
++#define WNDR4300_GPIO_USB_5V		0
++
++#define WNDR4300_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WNDR4300_KEYS_DEBOUNCE_INTERVAL	(3 * WNDR4300_KEYS_POLL_INTERVAL)
++
++static struct gpio_led wndr4300_leds_gpio[] __initdata = {
++	{
++		.name		= "netgear:green:power",
++		.gpio		= WNDR4300_GPIO_LED_POWER_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:power",
++		.gpio		= WNDR4300_GPIO_LED_POWER_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:wan",
++		.gpio		= WNDR4300_GPIO_LED_WAN_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:wan",
++		.gpio		= WNDR4300_GPIO_LED_WAN_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:usb",
++		.gpio		= WNDR4300_GPIO_LED_USB,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:wps",
++		.gpio		= WNDR4300_GPIO_LED_WPS_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:wps",
++		.gpio		= WNDR4300_GPIO_LED_WPS_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:wlan2g",
++		.gpio		= WNDR4300_GPIO_LED_WLAN2G,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:blue:wlan5g",
++		.gpio		= WNDR4300_GPIO_LED_WLAN5G,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button wndr4300_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNDR4300_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNDR4300_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "Wireless button",
++		.type		= EV_KEY,
++		.code		= KEY_RFKILL,
++		.debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNDR4300_GPIO_BTN_WIRELESS,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg wndr4300_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_led_cfg wndr4300_ar8327_led_cfg = {
++	.led_ctrl0 = 0xc737c737,
++	.led_ctrl1 = 0x00000000,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x0030c300,
++	.open_drain = false,
++};
++
++static struct ar8327_platform_data wndr4300_ar8327_data = {
++	.pad0_cfg = &wndr4300_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &wndr4300_ar8327_led_cfg,
++};
++
++static struct mdio_board_info wndr4300_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &wndr4300_ar8327_data,
++	},
++};
++
++static void __init wndr4300_setup(void)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(wndr4300_leds_gpio); i++)
++		ath79_gpio_output_select(wndr4300_leds_gpio[i].gpio,
++					 AR934X_GPIO_OUT_GPIO);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr4300_leds_gpio),
++				 wndr4300_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, WNDR4300_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wndr4300_gpio_keys),
++					wndr4300_gpio_keys);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++
++	mdiobus_register_board_info(wndr4300_mdio0_info,
++				    ARRAY_SIZE(wndr4300_mdio0_info));
++
++	ath79_register_mdio(0, 0x0);
++
++	/* GMAC0 is connected to an AR8327N switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++
++	ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
++	ath79_register_nfc();
++	ath79_register_usb();
++
++	ath79_register_wmac_simple();
++
++	/* enable power for the USB port */
++	ap9x_pci_setup_wmac_gpio(0, BIT(WNDR4300_GPIO_USB_5V),
++				 BIT(WNDR4300_GPIO_USB_5V));
++
++	ap91_pci_init_simple();
++}
++
++MIPS_MACHINE(ATH79_MACH_WNDR3700_V4, "WNDR3700_V4", "NETGEAR WNDR3700v4",
++	     wndr4300_setup);
++MIPS_MACHINE(ATH79_MACH_WNDR4300, "WNDR4300", "NETGEAR WNDR4300",
++	     wndr4300_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wnr2000.c linux-4.1.13/arch/mips/ath79/mach-wnr2000.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wnr2000.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wnr2000.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,145 @@
++/*
++ *  NETGEAR WNR2000 board support
++ *
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *  Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WNR2000_GPIO_LED_PWR_GREEN	14
++#define WNR2000_GPIO_LED_PWR_AMBER	7
++#define WNR2000_GPIO_LED_WPS		4
++#define WNR2000_GPIO_LED_WLAN		6
++#define WNR2000_GPIO_BTN_RESET		21
++#define WNR2000_GPIO_BTN_WPS		8
++
++#define WNR2000_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WNR2000_KEYS_DEBOUNCE_INTERVAL	(3 * WNR2000_KEYS_POLL_INTERVAL)
++
++static struct mtd_partition wnr2000_partitions[] = {
++	{
++		.name		= "u-boot",
++		.offset		= 0,
++		.size		= 0x040000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "u-boot-env",
++		.offset		= 0x040000,
++		.size		= 0x010000,
++	}, {
++		.name		= "rootfs",
++		.offset		= 0x050000,
++		.size		= 0x240000,
++	}, {
++		.name		= "user-config",
++		.offset		= 0x290000,
++		.size		= 0x010000,
++	}, {
++		.name		= "uImage",
++		.offset		= 0x2a0000,
++		.size		= 0x120000,
++	}, {
++		.name		= "language_table",
++		.offset		= 0x3c0000,
++		.size		= 0x020000,
++	}, {
++		.name		= "rootfs_checksum",
++		.offset		= 0x3e0000,
++		.size		= 0x010000,
++	}, {
++		.name		= "art",
++		.offset		= 0x3f0000,
++		.size		= 0x010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}
++};
++
++static struct flash_platform_data wnr2000_flash_data = {
++	.parts		= wnr2000_partitions,
++	.nr_parts	= ARRAY_SIZE(wnr2000_partitions),
++};
++
++static struct gpio_led wnr2000_leds_gpio[] __initdata = {
++	{
++		.name		= "netgear:green:power",
++		.gpio		= WNR2000_GPIO_LED_PWR_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:amber:power",
++		.gpio		= WNR2000_GPIO_LED_PWR_AMBER,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:wps",
++		.gpio		= WNR2000_GPIO_LED_WPS,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:blue:wlan",
++		.gpio		= WNR2000_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNR2000_GPIO_BTN_RESET,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNR2000_GPIO_BTN_WPS,
++	}
++};
++
++static void __init wnr2000_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.has_ar8216 = 1;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(&wnr2000_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
++				 wnr2000_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wnr2000_gpio_keys),
++					wnr2000_gpio_keys);
++
++	ath79_register_wmac(eeprom, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wnr2000-v3.c linux-4.1.13/arch/mips/ath79/mach-wnr2000-v3.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wnr2000-v3.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wnr2000-v3.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,140 @@
++/*
++ *  NETGEAR WNR2000v3/WNR612v2/WNR1000v2 board support
++ *
++ *  Copytight (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com>
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *  Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++
++#define WNR2000V3_GPIO_LED_WAN_GREEN	0
++#define WNR2000V3_GPIO_LED_LAN1_AMBER	1
++#define WNR2000V3_GPIO_LED_LAN4_AMBER	12
++#define WNR2000V3_GPIO_LED_PWR_GREEN	14
++#define WNR2000V3_GPIO_BTN_WPS		11
++
++#define WNR612V2_GPIO_LED_PWR_GREEN	11
++
++#define WNR1000V2_GPIO_LED_PWR_AMBER	1
++#define WNR1000V2_GPIO_LED_PWR_GREEN	11
++
++#define WNR2000V3_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WNR2000V3_KEYS_DEBOUNCE_INTERVAL	(3 * WNR2000V3_KEYS_POLL_INTERVAL)
++
++#define WNR2000V3_MAC0_OFFSET		0
++#define WNR2000V3_MAC1_OFFSET		6
++#define WNR2000V3_PCIE_CALDATA_OFFSET	0x1000
++
++static struct gpio_led wnr2000v3_leds_gpio[] __initdata = {
++	{
++		.name		= "wnr2000v3:green:power",
++		.gpio		= WNR2000V3_GPIO_LED_PWR_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "wnr2000v3:green:wan",
++		.gpio		= WNR2000V3_GPIO_LED_WAN_GREEN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_led wnr612v2_leds_gpio[] __initdata = {
++	{
++		.name		= "netgear:green:power",
++		.gpio		= WNR612V2_GPIO_LED_PWR_GREEN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_led wnr1000v2_leds_gpio[] __initdata = {
++	{
++		.name		= "netgear:green:power",
++		.gpio		= WNR1000V2_GPIO_LED_PWR_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:amber:power",
++		.gpio		= WNR1000V2_GPIO_LED_PWR_AMBER,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button wnr2000v3_gpio_keys[] __initdata = {
++	{
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNR2000V3_GPIO_BTN_WPS,
++	}
++};
++
++static void __init wnr_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V3_MAC0_OFFSET, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V3_MAC1_OFFSET, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(NULL);
++	ap91_pci_init(art + WNR2000V3_PCIE_CALDATA_OFFSET, NULL);
++}
++
++static void __init wnr2000v3_setup(void)
++{
++	wnr_common_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v3_leds_gpio),
++				 wnr2000v3_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WNR2000V3_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wnr2000v3_gpio_keys),
++					wnr2000v3_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_WNR2000_V3, "WNR2000V3", "NETGEAR WNR2000 V3", wnr2000v3_setup);
++
++static void __init wnr612v2_setup(void)
++{
++	wnr_common_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr612v2_leds_gpio),
++				 wnr612v2_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_WNR612_V2, "WNR612V2", "NETGEAR WNR612 V2", wnr612v2_setup);
++
++static void __init wnr1000v2_setup(void)
++{
++	wnr_common_setup();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr1000v2_leds_gpio),
++				 wnr1000v2_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_WNR1000_V2, "WNR1000V2", "NETGEAR WNR1000 V2", wnr1000v2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wnr2000-v4.c linux-4.1.13/arch/mips/ath79/mach-wnr2000-v4.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wnr2000-v4.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wnr2000-v4.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,214 @@
++/*
++ *  NETGEAR WNR2000v4 board support
++ *
++ *  Copyright (C) 2015 Michael Bazzinotti <mbazzinotti@gmail.com>
++ *  Copyright (C) 2014 Michaël Burtin <mburtin@gmail.com>
++ *  Copyright (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com>
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *  Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++/* AR9341 GPIOs */
++#define WNR2000V4_GPIO_LED_PWR_GREEN      0
++#define WNR2000V4_GPIO_LED_PWR_AMBER      1
++#define WNR2000V4_GPIO_LED_WPS            2
++#define WNR2000V4_GPIO_LED_WLAN           12
++#define WNR2000V4_GPIO_LED_LAN1_GREEN     13
++#define WNR2000V4_GPIO_LED_LAN2_GREEN     14
++#define WNR2000V4_GPIO_LED_LAN3_GREEN     15
++#define WNR2000V4_GPIO_LED_LAN4_GREEN     16
++#define WNR2000V4_GPIO_LED_LAN1_AMBER     18
++#define WNR2000V4_GPIO_LED_LAN2_AMBER     19
++#define WNR2000V4_GPIO_LED_LAN3_AMBER     20
++#define WNR2000V4_GPIO_LED_LAN4_AMBER     21
++#define WNR2000V4_GPIO_LED_WAN_GREEN      17
++#define WNR2000V4_GPIO_LED_WAN_AMBER      22
++/* Buttons */
++#define WNR2000V4_GPIO_BTN_WPS            3
++#define WNR2000V4_GPIO_BTN_RESET          4
++#define WNR2000V4_GPIO_BTN_WLAN           11
++#define WNR2000V4_KEYS_POLL_INTERVAL      20      /* msecs */
++#define WNR2000V4_KEYS_DEBOUNCE_INTERVAL  (3 * WNR2000V4_KEYS_POLL_INTERVAL)
++
++
++/* ART offsets */
++#define WNR2000V4_MAC0_OFFSET             0       /* WAN/WLAN0 MAC   */
++#define WNR2000V4_MAC1_OFFSET             6       /* Eth-switch0 MAC */
++
++static struct gpio_led wnr2000v4_leds_gpio[] __initdata = {
++	{
++		.name		= "netgear:green:power",
++		.gpio		= WNR2000V4_GPIO_LED_PWR_GREEN,
++		.active_low	= 1,
++		.default_trigger = "default-on",
++	},
++	{
++		.name		= "netgear:amber:status",
++		.gpio		= WNR2000V4_GPIO_LED_PWR_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:wan",
++		.gpio		= WNR2000V4_GPIO_LED_WAN_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:wan",
++		.gpio		= WNR2000V4_GPIO_LED_WAN_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:blue:wlan",
++		.gpio		= WNR2000V4_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++	/* LAN LEDS */
++	{
++		.name		= "netgear:green:lan1",
++		.gpio		= WNR2000V4_GPIO_LED_LAN1_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:lan2",
++		.gpio		= WNR2000V4_GPIO_LED_LAN2_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:lan3",
++		.gpio		= WNR2000V4_GPIO_LED_LAN3_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:lan4",
++		.gpio		= WNR2000V4_GPIO_LED_LAN4_GREEN,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:lan1",
++		.gpio		= WNR2000V4_GPIO_LED_LAN1_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:lan2",
++		.gpio		= WNR2000V4_GPIO_LED_LAN2_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:lan3",
++		.gpio		= WNR2000V4_GPIO_LED_LAN3_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:amber:lan4",
++		.gpio		= WNR2000V4_GPIO_LED_LAN4_AMBER,
++		.active_low	= 1,
++	},
++	{
++		.name		= "netgear:green:wps",
++		.gpio		= WNR2000V4_GPIO_LED_WPS,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button wnr2000v4_gpio_keys[] __initdata = {
++	{
++		.desc		= "WPS button",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNR2000V4_GPIO_BTN_WPS,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNR2000V4_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "WLAN button",
++		.type		= EV_KEY,
++		.code		= KEY_RFKILL,
++		.debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WNR2000V4_GPIO_BTN_WLAN,
++		.active_low	= 1,
++	},
++};
++
++static void __init wnr_common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee  = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_mdio(1, 0x0);
++
++	ath79_register_usb();
++
++	ath79_register_m25p80(NULL);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V4_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V4_MAC1_OFFSET, 0);
++
++	/* GMAC0 is connected to the PHY0 of the internal switch, GE0 */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_switch_data.phy_poll_mask = BIT(4);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the internal switch, GE1 */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_register_eth(1);
++
++	ath79_register_wmac(ee, art);
++}
++
++static void __init wnr2000v4_setup(void)
++{
++	int i;
++
++	wnr_common_setup();
++
++	/* Ensure no LED has an internal MUX signal, otherwise
++	control of LED could be lost... This is especially important
++	for most green LEDS (Eth,WAN).. who arrive in this function with
++	MUX signals set. */
++	for (i = 0; i < ARRAY_SIZE(wnr2000v4_leds_gpio); i++)
++		ath79_gpio_output_select(wnr2000v4_leds_gpio[i].gpio,
++					AR934X_GPIO_OUT_GPIO);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v4_leds_gpio),
++				 wnr2000v4_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WNR2000V4_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wnr2000v4_gpio_keys),
++					wnr2000v4_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_WNR2000_V4, "WNR2000V4", "NETGEAR WNR2000 V4", wnr2000v4_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wnr2200.c linux-4.1.13/arch/mips/ath79/mach-wnr2200.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wnr2200.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wnr2200.c	2015-11-21 17:22:11.759223549 +0100
+@@ -0,0 +1,137 @@
++/*
++ *  NETGEAR WNR2200 board support
++ *
++ *  Copyright (C) 2013 Aidan Kissane <aidankissane at googlemail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define WNR2200_GPIO_LED_LAN2_AMBER	0
++#define WNR2200_GPIO_LED_LAN4_AMBER	1
++#define WNR2200_GPIO_LED_WPS		5
++#define WNR2200_GPIO_LED_WAN_GREEN	7
++#define WNR2200_GPIO_LED_USB		8
++#define WNR2200_GPIO_LED_LAN3_AMBER	11
++#define WNR2200_GPIO_LED_WAN_AMBER	12
++#define WNR2200_GPIO_LED_LAN1_GREEN	13
++#define WNR2200_GPIO_LED_LAN2_GREEN	14
++#define WNR2200_GPIO_LED_LAN3_GREEN	15
++#define WNR2200_GPIO_LED_LAN4_GREEN	16
++#define WNR2200_GPIO_LED_PWR_AMBER	21
++#define WNR2200_GPIO_LED_PWR_GREEN	22
++#define WNR2200_GPIO_USB_5V		4
++#define WNR2200_GPIO_USB_POWER		24
++
++#define WNR2200_KEYS_POLL_INTERVAL	20 /* msecs */
++#define WNR2200_KEYS_DEBOUNCE_INTERVAL	(3 * WNR2200_KEYS_POLL_INTERVAL)
++
++#define WNR2200_MAC0_OFFSET		0
++#define WNR2200_MAC1_OFFSET		6
++#define WNR2200_PCIE_CALDATA_OFFSET	0x1000
++
++static struct gpio_led wnr2200_leds_gpio[] __initdata = {
++	{
++		.name		= "netgear:amber:lan2",
++		.gpio		= WNR2200_GPIO_LED_LAN2_AMBER,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:amber:lan4",
++		.gpio		= WNR2200_GPIO_LED_LAN4_AMBER,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:wps",
++		.gpio		= WNR2200_GPIO_LED_WPS,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:wan",
++		.gpio		= WNR2200_GPIO_LED_WAN_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:usb",
++		.gpio		= WNR2200_GPIO_LED_USB,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:amber:lan3",
++		.gpio		= WNR2200_GPIO_LED_LAN3_AMBER,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:amber:wan",
++		.gpio		= WNR2200_GPIO_LED_WAN_AMBER,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:lan1",
++		.gpio		= WNR2200_GPIO_LED_LAN1_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:lan2",
++		.gpio		= WNR2200_GPIO_LED_LAN2_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:lan3",
++		.gpio		= WNR2200_GPIO_LED_LAN3_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:lan4",
++		.gpio		= WNR2200_GPIO_LED_LAN4_GREEN,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:amber:power",
++		.gpio		= WNR2200_GPIO_LED_PWR_AMBER,
++		.active_low	= 1,
++	}, {
++		.name		= "netgear:green:power",
++		.gpio		= WNR2200_GPIO_LED_PWR_GREEN,
++		.active_low	= 1,
++	}
++};
++
++static void __init wnr2200_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2200_MAC0_OFFSET, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2200_MAC1_OFFSET, 0);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(NULL);
++	ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio),
++					wnr2200_leds_gpio);
++
++	/* enable power for the USB port */
++	ap9x_pci_setup_wmac_gpio(0,
++		BIT(WNR2200_GPIO_USB_5V),
++		BIT(WNR2200_GPIO_USB_5V));
++
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_WNR2200, "WNR2200", "NETGEAR WNR2200", wnr2200_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wp543.c linux-4.1.13/arch/mips/ath79/mach-wp543.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wp543.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wp543.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,109 @@
++/*
++ *  Compex WP543/WPJ543 board support
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define WP543_GPIO_SW6		2
++#define WP543_GPIO_LED_1	3
++#define WP543_GPIO_LED_2	4
++#define WP543_GPIO_LED_WLAN	5
++#define WP543_GPIO_LED_CONN	6
++#define WP543_GPIO_LED_DIAG	7
++#define WP543_GPIO_SW4		8
++
++#define WP543_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WP543_KEYS_DEBOUNCE_INTERVAL	(3 * WP543_KEYS_POLL_INTERVAL)
++
++static struct gpio_led wp543_leds_gpio[] __initdata = {
++	{
++		.name		= "wp543:green:led1",
++		.gpio		= WP543_GPIO_LED_1,
++		.active_low	= 1,
++	}, {
++		.name		= "wp543:green:led2",
++		.gpio		= WP543_GPIO_LED_2,
++		.active_low	= 1,
++	}, {
++		.name		= "wp543:green:wlan",
++		.gpio		= WP543_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}, {
++		.name		= "wp543:green:conn",
++		.gpio		= WP543_GPIO_LED_CONN,
++		.active_low	= 1,
++	}, {
++		.name		= "wp543:green:diag",
++		.gpio		= WP543_GPIO_LED_DIAG,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button wp543_gpio_keys[] __initdata = {
++	{
++		.desc		= "sw6",
++		.type		= EV_KEY,
++		.code		= BTN_0,
++		.debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WP543_GPIO_SW6,
++		.active_low	= 1,
++	}, {
++		.desc		= "sw4",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WP543_GPIO_SW4,
++		.active_low	= 1,
++	}
++};
++
++static const char *wp543_part_probes[] = {
++	"MyLoader",
++	NULL,
++};
++
++static struct flash_platform_data wp543_flash_data = {
++	.part_probes	= wp543_part_probes,
++};
++
++static void __init wp543_setup(void)
++{
++	ath79_register_m25p80(&wp543_flash_data);
++
++	ath79_register_mdio(0, 0xfffffff0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = 0x0f;
++	ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
++				    AR71XX_RESET_GE0_PHY;
++	ath79_register_eth(0);
++
++	ath79_register_usb();
++	ath79_register_pci();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
++					wp543_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(wp543_gpio_keys),
++					 wp543_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wpe72.c linux-4.1.13/arch/mips/ath79/mach-wpe72.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wpe72.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wpe72.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,97 @@
++/*
++ *  Compex WPE72 board support
++ *
++ *  Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++#include "pci.h"
++
++#define WPE72_GPIO_RESET	12
++#define WPE72_GPIO_LED_DIAG	13
++#define WPE72_GPIO_LED_1	14
++#define WPE72_GPIO_LED_2	15
++#define WPE72_GPIO_LED_3	16
++#define WPE72_GPIO_LED_4	17
++
++#define WPE72_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WPE72_KEYS_DEBOUNCE_INTERVAL	(3 * WPE72_KEYS_POLL_INTERVAL)
++
++static struct gpio_led wpe72_leds_gpio[] __initdata = {
++	{
++		.name		= "wpe72:green:led1",
++		.gpio		= WPE72_GPIO_LED_1,
++		.active_low	= 1,
++	}, {
++		.name		= "wpe72:green:led2",
++		.gpio		= WPE72_GPIO_LED_2,
++		.active_low	= 1,
++	}, {
++		.name		= "wpe72:green:led3",
++		.gpio		= WPE72_GPIO_LED_3,
++		.active_low	= 1,
++	}, {
++		.name		= "wpe72:green:led4",
++		.gpio		= WPE72_GPIO_LED_4,
++		.active_low	= 1,
++	}, {
++		.name		= "wpe72:green:diag",
++		.gpio		= WPE72_GPIO_LED_DIAG,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
++	{
++		.desc           = "reset",
++		.type           = EV_KEY,
++		.code           = KEY_RESTART,
++		.debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
++		.gpio           = WPE72_GPIO_RESET,
++		.active_low	= 1,
++	}
++};
++
++static const char *wpe72_part_probes[] = {
++	"MyLoader",
++	NULL,
++};
++
++static struct flash_platform_data wpe72_flash_data = {
++	.part_probes	= wpe72_part_probes,
++};
++
++static void __init wpe72_setup(void)
++{
++	ath79_register_m25p80(&wpe72_flash_data);
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_usb();
++	ath79_register_pci();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
++				 wpe72_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wpe72_gpio_keys),
++					wpe72_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wpj344.c linux-4.1.13/arch/mips/ath79/mach-wpj344.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wpj344.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wpj344.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,175 @@
++/*
++ * Compex WPJ344 board support
++ *
++ * Copyright (c) 2011 Qualcomm Atheros
++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/phy.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-usb.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WPJ344_GPIO_LED_SIG1	15
++#define WPJ344_GPIO_LED_SIG2	20
++#define WPJ344_GPIO_LED_SIG3	21
++#define WPJ344_GPIO_LED_SIG4	22
++#define WPJ344_GPIO_LED_STATUS	14
++
++#define WPJ344_GPIO_BTN_RESET	12
++
++#define WPJ344_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WPJ344_KEYS_DEBOUNCE_INTERVAL	(3 * WPJ344_KEYS_POLL_INTERVAL)
++
++#define WPJ344_MAC0_OFFSET		0
++#define WPJ344_MAC1_OFFSET		6
++#define WPJ344_WMAC_CALDATA_OFFSET	0x1000
++#define WPJ344_PCIE_CALDATA_OFFSET	0x5000
++
++static struct gpio_led wpj344_leds_gpio[] __initdata = {
++	{
++		.name		= "wpj344:green:status",
++		.gpio		= WPJ344_GPIO_LED_STATUS,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj344:red:sig1",
++		.gpio		= WPJ344_GPIO_LED_SIG1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj344:yellow:sig2",
++		.gpio		= WPJ344_GPIO_LED_SIG2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj344:green:sig3",
++		.gpio		= WPJ344_GPIO_LED_SIG3,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj344:green:sig4",
++		.gpio		= WPJ344_GPIO_LED_SIG4,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button wpj344_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WPJ344_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WPJ344_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg wpj344_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_led_cfg wpj344_ar8327_led_cfg = {
++	.led_ctrl0 = 0x00000000,
++	.led_ctrl1 = 0xc737c737,
++	.led_ctrl2 = 0x00000000,
++	.led_ctrl3 = 0x00c30c00,
++	.open_drain = true,
++};
++
++static struct ar8327_platform_data wpj344_ar8327_data = {
++	.pad0_cfg = &wpj344_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &wpj344_ar8327_led_cfg,
++};
++
++static struct mdio_board_info wpj344_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &wpj344_ar8327_data,
++	},
++};
++
++static void __init wpj344_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj344_leds_gpio),
++				 wpj344_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, WPJ344_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wpj344_gpio_keys),
++					wpj344_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_wmac(art + WPJ344_WMAC_CALDATA_OFFSET, NULL);
++
++	ath79_register_pci();
++
++	mdiobus_register_board_info(wpj344_mdio0_info,
++					ARRAY_SIZE(wpj344_mdio0_info));
++
++	ath79_register_mdio(1, 0x0);
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + WPJ344_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + WPJ344_MAC1_OFFSET, 0);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++				   AR934X_ETH_CFG_SW_ONLY_MODE);
++
++	/* GMAC0 is connected to an AR8327 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++
++	/* GMAC1 is connected to the internal switch */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_WPJ344, "WPJ344", "Compex WPJ344", wpj344_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wpj531.c linux-4.1.13/arch/mips/ath79/mach-wpj531.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wpj531.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wpj531.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,143 @@
++/*
++ * Compex WPJ531 board support
++ *
++ * Copyright (c) 2012 Qualcomm Atheros
++ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/irq.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "pci.h"
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WPJ531_GPIO_LED_SIG1    14
++#define WPJ531_GPIO_LED_SIG2    15
++#define WPJ531_GPIO_LED_SIG3    22
++#define WPJ531_GPIO_LED_SIG4    23
++#define WPJ531_GPIO_BUZZER      4
++
++#define WPJ531_GPIO_BTN_RESET   17
++
++#define WPJ531_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WPJ531_KEYS_DEBOUNCE_INTERVAL	(3 * WPJ531_KEYS_POLL_INTERVAL)
++
++#define WPJ531_MAC0_OFFSET		0x10
++#define WPJ531_MAC1_OFFSET		0x18
++#define WPJ531_WMAC_CALDATA_OFFSET	0x1000
++#define WPJ531_PCIE_CALDATA_OFFSET	0x5000
++
++#define WPJ531_ART_SIZE		0x8000
++
++static struct gpio_led wpj531_leds_gpio[] __initdata = {
++	{
++		.name		= "wpj531:red:sig1",
++		.gpio		= WPJ531_GPIO_LED_SIG1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj531:yellow:sig2",
++		.gpio		= WPJ531_GPIO_LED_SIG2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj531:green:sig3",
++		.gpio		= WPJ531_GPIO_LED_SIG3,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj531:green:sig4",
++		.gpio		= WPJ531_GPIO_LED_SIG4,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj531:buzzer",
++		.gpio		= WPJ531_GPIO_BUZZER,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button wpj531_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WPJ531_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WPJ531_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static void __init common_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN */
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ531_MAC0_OFFSET, 0);
++	ath79_register_eth(0);
++
++	/* WAN */
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_switch_data.phy_poll_mask |= BIT(4);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ531_MAC1_OFFSET, 0);
++	ath79_register_eth(1);
++
++	ath79_register_wmac(art + WPJ531_WMAC_CALDATA_OFFSET, NULL);
++
++	ath79_register_pci();
++	ath79_register_usb();
++}
++
++static void __init wpj531_setup(void)
++{
++	common_setup();
++
++	ath79_register_leds_gpio(-1,
++				ARRAY_SIZE(wpj531_leds_gpio),
++				wpj531_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1,
++					WPJ531_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wpj531_gpio_keys),
++					wpj531_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_WPJ531, "WPJ531", "Compex WPJ531", wpj531_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wpj558.c linux-4.1.13/arch/mips/ath79/mach-wpj558.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wpj558.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wpj558.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,177 @@
++/*
++ * Compex WPJ558 board support
++ *
++ * Copyright (c) 2012 Qualcomm Atheros
++ * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/platform_device.h>
++#include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-eth.h"
++#include "dev-usb.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WPJ558_GPIO_LED_SIG1	14
++#define WPJ558_GPIO_LED_SIG2	15
++#define WPJ558_GPIO_LED_SIG3	22
++#define WPJ558_GPIO_LED_SIG4	23
++#define WPJ558_GPIO_BUZZER		4
++
++#define WPJ558_GPIO_BTN_RESET	17
++
++#define WPJ558_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WPJ558_KEYS_DEBOUNCE_INTERVAL	(3 * WPJ558_KEYS_POLL_INTERVAL)
++
++#define WPJ558_MAC_OFFSET			0x1002
++#define WPJ558_WMAC_CALDATA_OFFSET	0x1000
++
++static struct gpio_led wpj558_leds_gpio[] __initdata = {
++	{
++		.name		= "wpj558:red:sig1",
++		.gpio		= WPJ558_GPIO_LED_SIG1,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj558:yellow:sig2",
++		.gpio		= WPJ558_GPIO_LED_SIG2,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj558:green:sig3",
++		.gpio		= WPJ558_GPIO_LED_SIG3,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj558:green:sig4",
++		.gpio		= WPJ558_GPIO_LED_SIG4,
++		.active_low	= 1,
++	},
++	{
++		.name		= "wpj558:buzzer",
++		.gpio		= WPJ558_GPIO_BUZZER,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_keys_button wpj558_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WPJ558_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WPJ558_GPIO_BTN_RESET,
++		.active_low	= 1,
++	},
++};
++
++static struct ar8327_pad_cfg wpj558_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_SGMII,
++	.sgmii_delay_en = true,
++};
++
++static struct ar8327_pad_cfg wpj558_ar8327_pad6_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data wpj558_ar8327_data = {
++	.pad0_cfg = &wpj558_ar8327_pad0_cfg,
++	.pad6_cfg = &wpj558_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info wpj558_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &wpj558_ar8327_data,
++	},
++};
++
++static void __init wpj558_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj558_leds_gpio),
++					wpj558_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, WPJ558_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wpj558_gpio_keys),
++					wpj558_gpio_keys);
++
++	ath79_register_usb();
++
++	ath79_register_wmac(art + WPJ558_WMAC_CALDATA_OFFSET, NULL);
++
++	ath79_register_pci();
++
++	mdiobus_register_board_info(wpj558_mdio0_info,
++					ARRAY_SIZE(wpj558_mdio0_info));
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, art + WPJ558_MAC_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, art + WPJ558_MAC_OFFSET, 0);
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	/* GMAC0 is connected to an AR8327 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x56000000;
++
++	/* GMAC1 is connected to the SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_WPJ558, "WPJ558", "Compex WPJ558", wpj558_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wrt160nl.c linux-4.1.13/arch/mips/ath79/mach-wrt160nl.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wrt160nl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wrt160nl.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,126 @@
++/*
++ *  Linksys WRT160NL board support
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "nvram.h"
++#include "machtypes.h"
++
++#define WRT160NL_GPIO_LED_POWER		14
++#define WRT160NL_GPIO_LED_WPS_AMBER	9
++#define WRT160NL_GPIO_LED_WPS_BLUE	8
++#define WRT160NL_GPIO_LED_WLAN		6
++
++#define WRT160NL_GPIO_BTN_WPS		7
++#define WRT160NL_GPIO_BTN_RESET		21
++
++#define WRT160NL_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WRT160NL_KEYS_DEBOUNCE_INTERVAL	(3 * WRT160NL_KEYS_POLL_INTERVAL)
++
++#define WRT160NL_NVRAM_ADDR	0x1f7e0000
++#define WRT160NL_NVRAM_SIZE	0x10000
++
++static const char *wrt160nl_part_probes[] = {
++	"cybertan",
++	NULL,
++};
++
++static struct flash_platform_data wrt160nl_flash_data = {
++	.part_probes	= wrt160nl_part_probes,
++};
++
++static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
++	{
++		.name		= "wrt160nl:blue:power",
++		.gpio		= WRT160NL_GPIO_LED_POWER,
++		.active_low	= 1,
++		.default_trigger = "default-on",
++	}, {
++		.name		= "wrt160nl:amber:wps",
++		.gpio		= WRT160NL_GPIO_LED_WPS_AMBER,
++		.active_low	= 1,
++	}, {
++		.name		= "wrt160nl:blue:wps",
++		.gpio		= WRT160NL_GPIO_LED_WPS_BLUE,
++		.active_low	= 1,
++	}, {
++		.name		= "wrt160nl:blue:wlan",
++		.gpio		= WRT160NL_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WRT160NL_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wps",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WRT160NL_GPIO_BTN_WPS,
++		.active_low	= 1,
++	}
++};
++
++static void __init wrt160nl_setup(void)
++{
++	const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 mac[6];
++
++	if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
++				       "lan_hwaddr=", mac) == 0) {
++		ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++		ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++	}
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.phy_mask = 0x01;
++
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(&wrt160nl_flash_data);
++
++	ath79_register_usb();
++
++	if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
++				       "wl0_hwaddr=", mac) == 0)
++		ath79_register_wmac(eeprom, mac);
++	else
++		ath79_register_wmac(eeprom, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
++				 wrt160nl_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wrt160nl_gpio_keys),
++					wrt160nl_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL",
++	     wrt160nl_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wrt400n.c linux-4.1.13/arch/mips/ath79/mach-wrt400n.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wrt400n.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wrt400n.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,161 @@
++/*
++ *  Linksys WRT400N board support
++ *
++ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
++
++#define WRT400N_GPIO_LED_POWER		1
++#define WRT400N_GPIO_LED_WPS_BLUE	4
++#define WRT400N_GPIO_LED_WPS_AMBER	5
++#define WRT400N_GPIO_LED_WLAN		6
++
++#define WRT400N_GPIO_BTN_RESET		8
++#define WRT400N_GPIO_BTN_WLSEC		3
++
++#define WRT400N_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WRT400N_KEYS_DEBOUNE_INTERVAL	(3 * WRT400N_KEYS_POLL_INTERVAL)
++
++#define WRT400N_MAC_ADDR_OFFSET		0x120c
++#define WRT400N_CALDATA0_OFFSET		0x1000
++#define WRT400N_CALDATA1_OFFSET		0x5000
++
++static struct mtd_partition wrt400n_partitions[] = {
++	{
++		.name		= "uboot",
++		.offset		= 0,
++		.size		= 0x030000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "env",
++		.offset		= 0x030000,
++		.size		= 0x010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "linux",
++		.offset		= 0x040000,
++		.size		= 0x140000,
++	}, {
++		.name		= "rootfs",
++		.offset		= 0x180000,
++		.size		= 0x630000,
++	}, {
++		.name		= "nvram",
++		.offset		= 0x7b0000,
++		.size		= 0x010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "factory",
++		.offset		= 0x7c0000,
++		.size		= 0x010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "language",
++		.offset		= 0x7d0000,
++		.size		= 0x020000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "caldata",
++		.offset		= 0x7f0000,
++		.size		= 0x010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "firmware",
++		.offset		= 0x040000,
++		.size		= 0x770000,
++	}
++};
++
++static struct flash_platform_data wrt400n_flash_data = {
++	.parts		= wrt400n_partitions,
++	.nr_parts	= ARRAY_SIZE(wrt400n_partitions),
++};
++
++static struct gpio_led wrt400n_leds_gpio[] __initdata = {
++	{
++		.name		= "wrt400n:blue:wps",
++		.gpio		= WRT400N_GPIO_LED_WPS_BLUE,
++		.active_low	= 1,
++	}, {
++		.name		= "wrt400n:amber:wps",
++		.gpio		= WRT400N_GPIO_LED_WPS_AMBER,
++		.active_low	= 1,
++	}, {
++		.name		= "wrt400n:blue:wlan",
++		.gpio		= WRT400N_GPIO_LED_WLAN,
++		.active_low	= 1,
++	}, {
++		.name		= "wrt400n:blue:power",
++		.gpio		= WRT400N_GPIO_LED_POWER,
++		.active_low	= 0,
++		.default_trigger = "default-on",
++	}
++};
++
++static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
++		.gpio		= WRT400N_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "wlsec",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
++		.gpio		= WRT400N_GPIO_BTN_WLSEC,
++		.active_low	= 1,
++	}
++};
++
++static void __init wrt400n_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac = art + WRT400N_MAC_ADDR_OFFSET;
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_m25p80(&wrt400n_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
++				 wrt400n_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wrt400n_gpio_keys),
++					wrt400n_gpio_keys);
++
++	ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
++		      art + WRT400N_CALDATA1_OFFSET, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wzr-450hp2.c linux-4.1.13/arch/mips/ath79/mach-wzr-450hp2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wzr-450hp2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wzr-450hp2.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,221 @@
++/*
++ * Buffalo WZR-450HP2 board support
++ *
++ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
++ *   Copyright (c) 2012 Qualcomm Atheros
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/phy.h>
++#include <linux/gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WZR_450HP2_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WZR_450HP2_KEYS_DEBOUNCE_INTERVAL (3 * WZR_450HP2_KEYS_POLL_INTERVAL)
++
++#define WZR_450HP2_WMAC_CALDATA_OFFSET	0x1000
++
++static struct mtd_partition wzrhpg450h_partitions[] = {
++	{
++		.name		= "u-boot",
++		.offset		= 0,
++		.size		= 0x0040000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "u-boot-env",
++		.offset		= 0x0040000,
++		.size		= 0x0010000,
++	}, {
++		.name		= "ART",
++		.offset		= 0x0ff0000,
++		.size		= 0x0010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "firmware",
++		.offset		= 0x0050000,
++		.size		= 0x0f90000,
++	}, {
++		.name		= "user_property",
++		.offset		= 0x0fe0000,
++		.size		= 0x0010000,
++	}
++};
++
++static struct flash_platform_data wzr_450hp2_flash_data = {
++	.parts		= wzrhpg450h_partitions,
++	.nr_parts	= ARRAY_SIZE(wzrhpg450h_partitions),
++};
++
++static struct gpio_led wzr_450hp2_leds_gpio[] __initdata = {
++	{
++		.name		= "buffalo:green:wps",
++		.gpio		= 3,
++		.active_low	= 1,
++	},
++	{
++		.name		= "buffalo:green:system",
++		.gpio		= 20,
++		.active_low	= 1,
++	},
++	{
++		.name		= "buffalo:green:wlan",
++		.gpio		= 18,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button wzr_450hp2_gpio_keys[] __initdata = {
++	{
++		.desc		= "Reset button",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 17,
++		.active_low	= 1,
++	},
++	{
++		.desc		= "RFKILL button",
++		.type		= EV_KEY,
++		.code		= KEY_RFKILL,
++		.debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 21,
++		.active_low	= 1,
++	},
++};
++
++static const struct ar8327_led_info wzr_450hp2_leds_ar8327[] = {
++	AR8327_LED_INFO(PHY0_0, HW, "buffalo:green:lan1"),
++	AR8327_LED_INFO(PHY1_0, HW, "buffalo:green:lan2"),
++	AR8327_LED_INFO(PHY2_0, HW, "buffalo:green:lan3"),
++	AR8327_LED_INFO(PHY3_0, HW, "buffalo:green:lan4"),
++	AR8327_LED_INFO(PHY4_0, HW, "buffalo:green:wan"),
++};
++
++/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
++static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_SGMII,
++	.sgmii_delay_en = true,
++};
++
++/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
++static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad6_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_led_cfg wzr_450hp2_ar8327_led_cfg = {
++	.led_ctrl0 = 0xcc35cc35,
++	.led_ctrl1 = 0xca35ca35,
++	.led_ctrl2 = 0xc935c935,
++	.led_ctrl3 = 0x03ffff00,
++	.open_drain = true,
++};
++
++static struct ar8327_platform_data wzr_450hp2_ar8327_data = {
++	.pad0_cfg = &wzr_450hp2_ar8327_pad0_cfg,
++	.pad6_cfg = &wzr_450hp2_ar8327_pad6_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.port6_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++	.led_cfg = &wzr_450hp2_ar8327_led_cfg,
++	.num_leds = ARRAY_SIZE(wzr_450hp2_leds_ar8327),
++	.leds = wzr_450hp2_leds_ar8327,
++};
++
++static struct mdio_board_info wzr_450hp2_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &wzr_450hp2_ar8327_data,
++	},
++};
++
++static void __init wzr_450hp2_setup(void)
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac_wan = art;
++	u8 *mac_lan = mac_wan + ETH_ALEN;
++
++	ath79_register_m25p80(&wzr_450hp2_flash_data);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wzr_450hp2_leds_gpio),
++				 wzr_450hp2_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, WZR_450HP2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wzr_450hp2_gpio_keys),
++					wzr_450hp2_gpio_keys);
++
++	ath79_register_wmac(art + WZR_450HP2_WMAC_CALDATA_OFFSET, mac_lan);
++
++	mdiobus_register_board_info(wzr_450hp2_mdio0_info,
++				    ARRAY_SIZE(wzr_450hp2_mdio0_info));
++	ath79_register_mdio(0, 0x0);
++
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
++
++	/* GMAC0 is connected to the RMGII interface */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x56000000;
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac_wan, 0);
++	ath79_register_eth(0);
++
++	/* GMAC1 is connected to the SGMII interface */
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++	ath79_eth1_data.speed = SPEED_1000;
++	ath79_eth1_data.duplex = DUPLEX_FULL;
++	ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac_lan, 0);
++	ath79_register_eth(1);
++
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_WZR_450HP2, "WZR-450HP2",
++	     "Buffalo WZR-450HP2", wzr_450hp2_setup);
++
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wzr-hp-ag300h.c linux-4.1.13/arch/mips/ath79/mach-wzr-hp-ag300h.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wzr-hp-ag300h.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wzr-hp-ag300h.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,205 @@
++/*
++ *  Buffalo WZR-HP-AG300H board support
++ *
++ *  Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define WZRHPAG300H_MAC_OFFSET		0x20c
++#define WZRHPAG300H_KEYS_POLL_INTERVAL	20      /* msecs */
++#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
++
++static struct mtd_partition wzrhpag300h_flash_partitions[] = {
++	{
++		.name		= "u-boot",
++		.offset		= 0,
++		.size		= 0x0040000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "u-boot-env",
++		.offset		= 0x0040000,
++		.size		= 0x0010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "art",
++		.offset		= 0x0050000,
++		.size		= 0x0010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "firmware",
++		.offset		= 0x0060000,
++		.size		= 0x1f90000,
++	}, {
++		.name		= "user_property",
++		.offset		= 0x1ff0000,
++		.size		= 0x0010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}
++};
++
++static struct flash_platform_data wzrhpag300h_flash_data = {
++	.parts      = wzrhpag300h_flash_partitions,
++	.nr_parts   = ARRAY_SIZE(wzrhpag300h_flash_partitions),
++};
++
++static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
++	{
++		.name		= "buffalo:red:diag",
++		.gpio		= 1,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_led wzrhpag300h_wmac0_leds_gpio[] = {
++        {
++                .name           = "buffalo:amber:band2g",
++                .gpio           = 1,
++                .active_low     = 1,
++	},
++        {
++                .name           = "buffalo:green:usb",
++                .gpio           = 3,
++                .active_low     = 1,
++	},
++        {
++                .name           = "buffalo:green:band2g",
++                .gpio           = 5,
++                .active_low     = 1,
++	},
++};
++
++static struct gpio_led wzrhpag300h_wmac1_leds_gpio[] = {
++        {
++                .name           = "buffalo:green:band5g",
++                .gpio           = 1,
++                .active_low     = 1,
++	},
++        {
++                .name           = "buffalo:green:router",
++                .gpio           = 3,
++                .active_low     = 1,
++	},
++        {
++                .name           = "buffalo:blue:movie_engine",
++                .gpio           = 4,
++                .active_low     = 1,
++	},
++        {
++                .name           = "buffalo:amber:band5g",
++                .gpio           = 5,
++                .active_low     = 1,
++	},
++};
++
++static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 11,
++		.active_low	= 1,
++	}, {
++		.desc		= "usb",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 3,
++		.active_low	= 1,
++	}, {
++		.desc		= "aoss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 5,
++		.active_low	= 1,
++	}, {
++		.desc		= "router_auto",
++		.type		= EV_SW,
++		.code		= BTN_6,
++		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 6,
++		.active_low	= 1,
++	}, {
++		.desc		= "router_off",
++		.type		= EV_SW,
++		.code		= BTN_5,
++		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 7,
++		.active_low	= 1,
++	}, {
++		.desc		= "movie_engine",
++		.type		= EV_SW,
++		.code		= BTN_7,
++		.debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 8,
++		.active_low	= 1,
++	}
++};
++
++static void __init wzrhpag300h_setup(void)
++{
++	u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
++	u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
++	u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
++	u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
++
++	ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_mask = BIT(0);
++
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = BIT(4);
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
++					wzrhpag300h_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(wzrhpag300h_gpio_keys),
++					 wzrhpag300h_gpio_keys);
++
++	ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
++
++	ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
++
++	ap9x_pci_setup_wmac_led_pin(0, 1);
++	ap9x_pci_setup_wmac_led_pin(1, 5);
++
++	ap9x_pci_setup_wmac_leds(0, wzrhpag300h_wmac0_leds_gpio,
++				ARRAY_SIZE(wzrhpag300h_wmac0_leds_gpio));
++	ap9x_pci_setup_wmac_leds(1, wzrhpag300h_wmac1_leds_gpio,
++				ARRAY_SIZE(wzrhpag300h_wmac1_leds_gpio));
++}
++
++MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
++	     "Buffalo WZR-HP-AG300H/WZR-600DHP", wzrhpag300h_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wzr-hp-g300nh2.c linux-4.1.13/arch/mips/ath79/mach-wzr-hp-g300nh2.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wzr-hp-g300nh2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wzr-hp-g300nh2.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,170 @@
++/*
++ *  Buffalo WZR-HP-G300NH2 board support
++ *
++ *  Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
++ *  Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define WZRHPG300NH2_MAC_OFFSET		0x20c
++#define WZRHPG300NH2_KEYS_POLL_INTERVAL     20      /* msecs */
++#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
++
++static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
++	{
++		.name		= "u-boot",
++		.offset		= 0,
++		.size		= 0x0040000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "u-boot-env",
++		.offset		= 0x0040000,
++		.size		= 0x0010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "art",
++		.offset		= 0x0050000,
++		.size		= 0x0010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "firmware",
++		.offset		= 0x0060000,
++		.size		= 0x1f90000,
++	}, {
++		.name		= "user_property",
++		.offset		= 0x1ff0000,
++		.size		= 0x0010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}
++};
++
++static struct flash_platform_data wzrhpg300nh2_flash_data = {
++	.parts          = wzrhpg300nh2_flash_partitions,
++	.nr_parts       = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
++};
++
++static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
++	{
++		.name		= "buffalo:red:diag",
++		.gpio		= 16,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
++	{
++		.name           = "buffalo:blue:usb",
++		.gpio           = 4,
++		.active_low     = 1,
++	},
++	{
++		.name           = "buffalo:orange:security",
++		.gpio           = 6,
++		.active_low     = 1,
++	},
++	{
++		.name           = "buffalo:green:router",
++		.gpio           = 7,
++		.active_low     = 1,
++	},
++	{
++		.name           = "buffalo:blue:movie_engine_on",
++		.gpio           = 8,
++		.active_low     = 1,
++	},
++	{
++		.name           = "buffalo:blue:movie_engine_off",
++		.gpio           = 9,
++		.active_low     = 1,
++	},
++};
++
++/* The AOSS button is wmac gpio 12 */
++static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 1,
++		.active_low	= 1,
++	}, {
++		.desc		= "usb",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 7,
++		.active_low	= 1,
++	}, {
++		.desc		= "qos",
++		.type		= EV_KEY,
++		.code		= BTN_3,
++		.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 11,
++		.active_low	= 0,
++	}, {
++		.desc		= "router_on",
++		.type		= EV_KEY,
++		.code		= BTN_5,
++		.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 8,
++		.active_low	= 0,
++	},
++};
++
++static void __init wzrhpg300nh2_setup(void)
++{
++
++	u8 *eeprom = (u8 *)   KSEG1ADDR(0x1f051000);
++	u8 *mac0   = eeprom + WZRHPG300NH2_MAC_OFFSET;
++	/* There is an eth1 but it is not connected to the switch */
++
++	ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
++	ath79_register_mdio(0, ~(BIT(0)));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_mask = BIT(0);
++
++	ath79_register_eth(0);
++
++	/* gpio13 is usb power.  Turn it on. */
++	gpio_request_one(13, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
++				 wzrhpg300nh2_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
++					wzrhpg300nh2_gpio_keys);
++	ap9x_pci_setup_wmac_led_pin(0, 5);
++	ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
++				ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
++
++	ap91_pci_init(eeprom, mac0);
++}
++
++MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
++	     "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wzr-hp-g300nh.c linux-4.1.13/arch/mips/ath79/mach-wzr-hp-g300nh.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wzr-hp-g300nh.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wzr-hp-g300nh.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,279 @@
++/*
++ *  Buffalo WZR-HP-G300NH board support
++ *
++ *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/nxp_74hc153.h>
++#include <linux/rtl8366.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
++
++#define WZRHPG300NH_GPIO_LED_USB	0
++#define WZRHPG300NH_GPIO_LED_DIAG	1
++#define WZRHPG300NH_GPIO_LED_WIRELESS	6
++#define WZRHPG300NH_GPIO_LED_SECURITY	17
++#define WZRHPG300NH_GPIO_LED_ROUTER	18
++
++#define WZRHPG300NH_GPIO_RTL8366_SDA	19
++#define WZRHPG300NH_GPIO_RTL8366_SCK	20
++
++#define WZRHPG300NH_GPIO_74HC153_S0	9
++#define WZRHPG300NH_GPIO_74HC153_S1	11
++#define WZRHPG300NH_GPIO_74HC153_1Y	12
++#define WZRHPG300NH_GPIO_74HC153_2Y	14
++
++#define WZRHPG300NH_GPIO_EXP_BASE	32
++#define WZRHPG300NH_GPIO_BTN_AOSS	(WZRHPG300NH_GPIO_EXP_BASE + 0)
++#define WZRHPG300NH_GPIO_BTN_RESET	(WZRHPG300NH_GPIO_EXP_BASE + 1)
++#define WZRHPG300NH_GPIO_BTN_ROUTER_ON	(WZRHPG300NH_GPIO_EXP_BASE + 2)
++#define WZRHPG300NH_GPIO_BTN_QOS_ON	(WZRHPG300NH_GPIO_EXP_BASE + 3)
++#define WZRHPG300NH_GPIO_BTN_USB	(WZRHPG300NH_GPIO_EXP_BASE + 5)
++#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6)
++#define WZRHPG300NH_GPIO_BTN_QOS_OFF	(WZRHPG300NH_GPIO_EXP_BASE + 7)
++
++#define WZRHPG300NH_KEYS_POLL_INTERVAL	20	/* msecs */
++#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL)
++
++#define WZRHPG300NH_MAC_OFFSET		0x20c
++
++static struct mtd_partition wzrhpg300nh_flash_partitions[] = {
++	{
++		.name		= "u-boot",
++		.offset		= 0,
++		.size		= 0x0040000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "u-boot-env",
++		.offset		= 0x0040000,
++		.size		= 0x0020000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "firmware",
++		.offset		= 0x0060000,
++		.size		= 0x1f60000,
++	}, {
++		.name		= "user_property",
++		.offset		= 0x1fc0000,
++		.size		= 0x0020000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "art",
++		.offset		= 0x1fe0000,
++		.size		= 0x0020000,
++		.mask_flags	= MTD_WRITEABLE,
++	}
++};
++
++static struct physmap_flash_data wzrhpg300nh_flash_data = {
++	.width		= 2,
++	.parts		= wzrhpg300nh_flash_partitions,
++	.nr_parts	= ARRAY_SIZE(wzrhpg300nh_flash_partitions),
++};
++
++#define WZRHPG300NH_FLASH_BASE	0x1e000000
++#define WZRHPG300NH_FLASH_SIZE	(32 * 1024 * 1024)
++
++static struct resource wzrhpg300nh_flash_resources[] = {
++	[0] = {
++		.start	= WZRHPG300NH_FLASH_BASE,
++		.end	= WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1,
++		.flags	= IORESOURCE_MEM,
++	},
++};
++
++static struct platform_device wzrhpg300nh_flash_device = {
++	.name		= "physmap-flash",
++	.id		= -1,
++	.resource	= wzrhpg300nh_flash_resources,
++	.num_resources	= ARRAY_SIZE(wzrhpg300nh_flash_resources),
++	.dev		= {
++		.platform_data = &wzrhpg300nh_flash_data,
++	}
++};
++
++static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = {
++	{
++		.name		= "buffalo:orange:security",
++		.gpio		= WZRHPG300NH_GPIO_LED_SECURITY,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:green:wireless",
++		.gpio		= WZRHPG300NH_GPIO_LED_WIRELESS,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:green:router",
++		.gpio		= WZRHPG300NH_GPIO_LED_ROUTER,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:red:diag",
++		.gpio		= WZRHPG300NH_GPIO_LED_DIAG,
++		.active_low	= 1,
++	}, {
++		.name		= "buffalo:blue:usb",
++		.gpio		= WZRHPG300NH_GPIO_LED_USB,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WZRHPG300NH_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}, {
++		.desc		= "aoss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WZRHPG300NH_GPIO_BTN_AOSS,
++		.active_low	= 1,
++	}, {
++		.desc		= "usb",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WZRHPG300NH_GPIO_BTN_USB,
++		.active_low	= 1,
++	}, {
++		.desc		= "qos_on",
++		.type		= EV_KEY,
++		.code		= BTN_3,
++		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WZRHPG300NH_GPIO_BTN_QOS_ON,
++		.active_low	= 0,
++	}, {
++		.desc		= "qos_off",
++		.type		= EV_KEY,
++		.code		= BTN_4,
++		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WZRHPG300NH_GPIO_BTN_QOS_OFF,
++		.active_low	= 0,
++	}, {
++		.desc		= "router_on",
++		.type		= EV_KEY,
++		.code		= BTN_5,
++		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WZRHPG300NH_GPIO_BTN_ROUTER_ON,
++		.active_low	= 0,
++	}, {
++		.desc		= "router_auto",
++		.type		= EV_KEY,
++		.code		= BTN_6,
++		.debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= WZRHPG300NH_GPIO_BTN_ROUTER_AUTO,
++		.active_low	= 0,
++	}
++};
++
++static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = {
++	.gpio_base	= WZRHPG300NH_GPIO_EXP_BASE,
++	.gpio_pin_s0	= WZRHPG300NH_GPIO_74HC153_S0,
++	.gpio_pin_s1	= WZRHPG300NH_GPIO_74HC153_S1,
++	.gpio_pin_1y	= WZRHPG300NH_GPIO_74HC153_1Y,
++	.gpio_pin_2y	= WZRHPG300NH_GPIO_74HC153_2Y,
++};
++
++static struct platform_device wzrhpg300nh_74hc153_device = {
++	.name		= NXP_74HC153_DRIVER_NAME,
++	.id		= -1,
++	.dev = {
++		.platform_data	= &wzrhpg300nh_74hc153_data,
++	}
++};
++
++static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = {
++	.gpio_sda	= WZRHPG300NH_GPIO_RTL8366_SDA,
++	.gpio_sck	= WZRHPG300NH_GPIO_RTL8366_SCK,
++};
++
++static struct platform_device wzrhpg300nh_rtl8366s_device = {
++	.name		= RTL8366S_DRIVER_NAME,
++	.id		= -1,
++	.dev = {
++		.platform_data	= &wzrhpg300nh_rtl8366_data,
++	}
++};
++
++static struct platform_device wzrhpg300nh_rtl8366rb_device = {
++	.name           = RTL8366RB_DRIVER_NAME,
++	.id             = -1,
++	.dev = {
++		.platform_data  = &wzrhpg300nh_rtl8366_data,
++	}
++};
++
++static void __init wzrhpg300nh_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET;
++	bool hasrtl8366rb = false;
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++
++	if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB)
++		hasrtl8366rb = true;
++
++	if (hasrtl8366rb) {
++		ath79_eth0_pll_data.pll_1000 = 0x1f000000;
++		ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
++		ath79_eth1_pll_data.pll_1000 = 0x100;
++		ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
++	} else {
++		ath79_eth0_pll_data.pll_1000 = 0x1e000100;
++		ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
++		ath79_eth1_pll_data.pll_1000 = 0x1e000100;
++		ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
++	}
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth1_data.phy_mask = 0x10;
++
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ath79_register_usb();
++	ath79_register_wmac(eeprom, NULL);
++
++	platform_device_register(&wzrhpg300nh_74hc153_device);
++	platform_device_register(&wzrhpg300nh_flash_device);
++
++	if (hasrtl8366rb)
++		platform_device_register(&wzrhpg300nh_rtl8366rb_device);
++	else
++		platform_device_register(&wzrhpg300nh_rtl8366s_device);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
++					wzrhpg300nh_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL,
++					 ARRAY_SIZE(wzrhpg300nh_gpio_keys),
++					 wzrhpg300nh_gpio_keys);
++
++}
++
++MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
++	     "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-wzr-hp-g450h.c linux-4.1.13/arch/mips/ath79/mach-wzr-hp-g450h.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-wzr-hp-g450h.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-wzr-hp-g450h.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,165 @@
++/*
++ *  Buffalo WZR-HP-G450G board support
++ *
++ *  Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/gpio.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/ath9k_platform.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
++#include "dev-m25p80.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-usb.h"
++#include "machtypes.h"
++
++#define WZRHPG450H_KEYS_POLL_INTERVAL     20      /* msecs */
++#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL)
++
++static struct mtd_partition wzrhpg450h_partitions[] = {
++	{
++		.name		= "u-boot",
++		.offset		= 0,
++		.size		= 0x0040000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "u-boot-env",
++		.offset		= 0x0040000,
++		.size		= 0x0010000,
++	}, {
++		.name		= "ART",
++		.offset		= 0x0050000,
++		.size		= 0x0010000,
++		.mask_flags	= MTD_WRITEABLE,
++	}, {
++		.name		= "firmware",
++		.offset		= 0x0060000,
++		.size		= 0x1f80000,
++	}, {
++		.name		= "user_property",
++		.offset		= 0x1fe0000,
++		.size		= 0x0020000,
++	}
++};
++
++static struct flash_platform_data wzrhpg450h_flash_data = {
++	.parts		= wzrhpg450h_partitions,
++	.nr_parts	= ARRAY_SIZE(wzrhpg450h_partitions),
++};
++
++static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = {
++	{
++		.name		= "buffalo:red:diag",
++		.gpio		= 14,
++		.active_low	= 1,
++	},
++	{
++		.name		= "buffalo:orange:security",
++		.gpio		= 13,
++		.active_low	= 1,
++	},
++};
++
++
++static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = {
++	{
++		.name		= "buffalo:blue:movie_engine",
++		.gpio		= 13,
++		.active_low	= 1,
++	},
++	{
++		.name		= "buffalo:green:router",
++		.gpio		= 14,
++		.active_low	= 1,
++	},
++};
++
++static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 6,
++		.active_low	= 1,
++	}, {
++		.desc		= "usb",
++		.type		= EV_KEY,
++		.code		= BTN_2,
++		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 1,
++		.active_low	= 1,
++	}, {
++		.desc		= "aoss",
++		.type		= EV_KEY,
++		.code		= KEY_WPS_BUTTON,
++		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 8,
++		.active_low	= 1,
++	}, {
++		.desc		= "movie_engine",
++		.type		= EV_KEY,
++		.code		= BTN_6,
++		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 7,
++		.active_low	= 0,
++	}, {
++		.desc		= "router_off",
++		.type		= EV_KEY,
++		.code		= BTN_5,
++		.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 12,
++		.active_low	= 0,
++	}
++};
++
++
++static void __init wzrhpg450h_init(void)
++{
++	u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
++	u8 *mac = (u8 *) ee + 2;
++
++	ath79_register_m25p80_multi(&wzrhpg450h_flash_data);
++
++	ath79_register_mdio(0, ~BIT(0));
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.speed = SPEED_1000;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_mask = BIT(0);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
++				 wzrhpg450h_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(wzrhpg450h_gpio_keys),
++					wzrhpg450h_gpio_keys);
++
++	ath79_register_eth(0);
++
++	gpio_request_one(16, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "USB power");
++	ath79_register_usb();
++
++	ap91_pci_init(ee, NULL);
++	ap9x_pci_get_wmac_data(0)->tx_gain_buffalo = true;
++	ap9x_pci_get_wmac_data(1)->tx_gain_buffalo = true;
++	ap9x_pci_setup_wmac_led_pin(0, 15);
++	ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio,
++				 ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
++}
++
++MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H",
++	     wzrhpg450h_init);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/mach-zcn-1523h.c linux-4.1.13/arch/mips/ath79/mach-zcn-1523h.c
+--- linux-4.1.13.orig/arch/mips/ath79/mach-zcn-1523h.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/mach-zcn-1523h.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,154 @@
++/*
++ *  Zcomax ZCN-1523H-2-8/5-16 board support
++ *
++ *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-eth.h"
++#include "dev-m25p80.h"
++#include "dev-ap9x-pci.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "machtypes.h"
++
++#define ZCN_1523H_GPIO_BTN_RESET	0
++#define ZCN_1523H_GPIO_LED_INIT		11
++#define ZCN_1523H_GPIO_LED_LAN1		17
++
++#define ZCN_1523H_2_GPIO_LED_WEAK	13
++#define ZCN_1523H_2_GPIO_LED_MEDIUM	14
++#define ZCN_1523H_2_GPIO_LED_STRONG	15
++
++#define ZCN_1523H_5_GPIO_LAN2_POWER	1
++#define ZCN_1523H_5_GPIO_LED_LAN2	13
++#define ZCN_1523H_5_GPIO_LED_WEAK	14
++#define ZCN_1523H_5_GPIO_LED_MEDIUM	15
++#define ZCN_1523H_5_GPIO_LED_STRONG	16
++
++#define ZCN_1523H_KEYS_POLL_INTERVAL	20	/* msecs */
++#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL)
++
++static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= ZCN_1523H_GPIO_BTN_RESET,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_led zcn_1523h_leds_gpio[] __initdata = {
++	{
++		.name		= "zcn-1523h:amber:init",
++		.gpio		= ZCN_1523H_GPIO_LED_INIT,
++		.active_low	= 1,
++	}, {
++		.name		= "zcn-1523h:green:lan1",
++		.gpio		= ZCN_1523H_GPIO_LED_LAN1,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = {
++	{
++		.name		= "zcn-1523h:red:weak",
++		.gpio		= ZCN_1523H_2_GPIO_LED_WEAK,
++		.active_low	= 1,
++	}, {
++		.name		= "zcn-1523h:amber:medium",
++		.gpio		= ZCN_1523H_2_GPIO_LED_MEDIUM,
++		.active_low	= 1,
++	}, {
++		.name		= "zcn-1523h:green:strong",
++		.gpio		= ZCN_1523H_2_GPIO_LED_STRONG,
++		.active_low	= 1,
++	}
++};
++
++static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
++	{
++		.name		= "zcn-1523h:red:weak",
++		.gpio		= ZCN_1523H_5_GPIO_LED_WEAK,
++		.active_low	= 1,
++	}, {
++		.name		= "zcn-1523h:amber:medium",
++		.gpio		= ZCN_1523H_5_GPIO_LED_MEDIUM,
++		.active_low	= 1,
++	}, {
++		.name		= "zcn-1523h:green:strong",
++		.gpio		= ZCN_1523H_5_GPIO_LED_STRONG,
++		.active_low	= 1,
++	}, {
++		.name		= "zcn-1523h:green:lan2",
++		.gpio		= ZCN_1523H_5_GPIO_LED_LAN2,
++		.active_low	= 1,
++	}
++};
++
++static void __init zcn_1523h_generic_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				    AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
++					zcn_1523h_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(zcn_1523h_gpio_keys),
++					zcn_1523h_gpio_keys);
++
++	ap91_pci_init(ee, mac);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
++
++	ath79_register_mdio(0, 0x0);
++
++	/* LAN1 port */
++	ath79_register_eth(0);
++}
++
++static void __init zcn_1523h_2_setup(void)
++{
++	zcn_1523h_generic_setup();
++	ap9x_pci_setup_wmac_gpio(0, BIT(9), 0);
++
++	ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
++				 zcn_1523h_2_leds_gpio);
++}
++
++MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
++	     zcn_1523h_2_setup);
++
++static void __init zcn_1523h_5_setup(void)
++{
++	zcn_1523h_generic_setup();
++	ap9x_pci_setup_wmac_gpio(0, BIT(8), 0);
++
++	ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
++				 zcn_1523h_5_leds_gpio);
++
++	/* LAN2 port */
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5",
++	     zcn_1523h_5_setup);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/Makefile linux-4.1.13/arch/mips/ath79/Makefile
+--- linux-4.1.13.orig/arch/mips/ath79/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/Makefile	2015-12-04 19:57:05.957975089 +0100
+@@ -17,18 +17,169 @@
+ # Devices
+ #
+ obj-y					+= dev-common.o
++obj-$(CONFIG_ATH79_DEV_AP9X_PCI)	+= dev-ap9x-pci.o
++obj-$(CONFIG_ATH79_DEV_DSA)		+= dev-dsa.o
++obj-$(CONFIG_ATH79_DEV_ETH)		+= dev-eth.o
+ obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o
+ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)	+= dev-leds-gpio.o
++obj-$(CONFIG_ATH79_DEV_M25P80)		+= dev-m25p80.o
++obj-$(CONFIG_ATH79_DEV_NFC)		+= dev-nfc.o
+ obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
+ obj-$(CONFIG_ATH79_DEV_USB)		+= dev-usb.o
+ obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
+ 
+ #
++# Miscellaneous objects
++#
++obj-$(CONFIG_ATH79_NVRAM)		+= nvram.o
++obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)	+= pci-ath9k-fixup.o
++obj-$(CONFIG_ATH79_ROUTERBOOT)		+= routerboot.o
++
++#
+ # Machines
+ #
++obj-$(CONFIG_ATH79_MACH_ALFA_AP96)	+= mach-alfa-ap96.o
++obj-$(CONFIG_ATH79_MACH_ALFA_NX)	+= mach-alfa-nx.o
++obj-$(CONFIG_ATH79_MACH_ALL0258N)	+= mach-all0258n.o
++obj-$(CONFIG_ATH79_MACH_ALL0315N)	+= mach-all0315n.o
++obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
++obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
++obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN)	+= mach-arduino-yun.o
++obj-$(CONFIG_ATH79_MACH_AP113)		+= mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
++obj-$(CONFIG_ATH79_MACH_AP132)		+= mach-ap132.o
+ obj-$(CONFIG_ATH79_MACH_AP136)		+= mach-ap136.o
++obj-$(CONFIG_ATH79_MACH_AP143)		+= mach-ap143.o
++obj-$(CONFIG_ATH79_MACH_AP147)		+= mach-ap147.o
++obj-$(CONFIG_ATH79_MACH_AP152)		+= mach-ap152.o
+ obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
++obj-$(CONFIG_ATH79_MACH_AP83)		+= mach-ap83.o
++obj-$(CONFIG_ATH79_MACH_AP96)		+= mach-ap96.o
++obj-$(CONFIG_ATH79_MACH_ARCHER_C7)	+= mach-archer-c7.o
++obj-$(CONFIG_ATH79_MACH_AW_NR580)	+= mach-aw-nr580.o
++obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
++obj-$(CONFIG_ATH79_MACH_BSB)		+= mach-bsb.o
++obj-$(CONFIG_ATH79_MACH_CAP4200AG)	+= mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)	+= mach-cf-e316n-v2.o
++obj-$(CONFIG_ATH79_MACH_CPE510)		+= mach-cpe510.o
+ obj-$(CONFIG_ATH79_MACH_DB120)		+= mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT)	+= mach-dlan-hotspot.o
++obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP)	+= mach-dlan-pro-500-wp.o
++obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC)	+= mach-dlan-pro-1200-ac.o
++obj-$(CONFIG_ATH79_MACH_DGL_5500_A1)	+= mach-dgl-5500-a1.o
++obj-$(CONFIG_ATH79_MACH_DHP_1565_A1)	+= mach-dhp-1565-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_505_A1)	+= mach-dir-505-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_600_A1)	+= mach-dir-600-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_C1)	+= mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_I1)	+= mach-dir-615-i1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_B1)	+= mach-dir-825-b1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_C1)	+= mach-dir-825-c1.o
++obj-$(CONFIG_ATH79_MACH_DRAGINO2)	+= mach-dragino2.o
++obj-$(CONFIG_ATH79_MACH_ESR900)	+= mach-esr900.o
++obj-$(CONFIG_ATH79_MACH_EW_DORIN)	+= mach-ew-dorin.o
++obj-$(CONFIG_ATH79_MACH_EAP300V2)	+= mach-eap300v2.o
++obj-$(CONFIG_ATH79_MACH_EAP7660D)	+= mach-eap7660d.o
++obj-$(CONFIG_ATH79_MACH_EL_M150)	+= mach-el-m150.o
++obj-$(CONFIG_ATH79_MACH_EL_MINI)	+= mach-el-mini.o
++obj-$(CONFIG_ATH79_MACH_EPG5000)	+= mach-epg5000.o
++obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach-esr1750.o
++obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
++obj-$(CONFIG_ATH79_MACH_GL_AR150)   += mach-gl-ar150.o
++obj-$(CONFIG_ATH79_MACH_GL_AR300)	+= mach-gl-ar300.o
++obj-$(CONFIG_ATH79_MACH_GL_DOMINO)		+= mach-gl-domino.o
++obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
++obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)	+= mach-gs-minibox-v1.o
++obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
++obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361)	+= mach-hiwifi-hc6361.o
++obj-$(CONFIG_ATH79_MACH_JA76PF)		+= mach-ja76pf.o
++obj-$(CONFIG_ATH79_MACH_JWAP003)	+= mach-jwap003.o
++obj-$(CONFIG_ATH79_MACH_HORNET_UB)	+= mach-hornet-ub.o
++obj-$(CONFIG_ATH79_MACH_MC_MAC1200R)     += mach-mc-mac1200r.o
++obj-$(CONFIG_ATH79_MACH_MR12)		+= mach-mr12.o
++obj-$(CONFIG_ATH79_MACH_MR16)		+= mach-mr16.o
++obj-$(CONFIG_ATH79_MACH_MR1750)		+= mach-mr1750.o
++obj-$(CONFIG_ATH79_MACH_MR600)		+= mach-mr600.o
++obj-$(CONFIG_ATH79_MACH_MR900)		+= mach-mr900.o
++obj-$(CONFIG_ATH79_MACH_MYNET_N600)	+= mach-mynet-n600.o
++obj-$(CONFIG_ATH79_MACH_MYNET_N750)	+= mach-mynet-n750.o
++obj-$(CONFIG_ATH79_MACH_MYNET_REXT)	+= mach-mynet-rext.o
++obj-$(CONFIG_ATH79_MACH_MZK_W04NU)	+= mach-mzk-w04nu.o
++obj-$(CONFIG_ATH79_MACH_MZK_W300NH)	+= mach-mzk-w300nh.o
++obj-$(CONFIG_ATH79_MACH_NBG460N)	+= mach-nbg460n.o
++obj-$(CONFIG_ATH79_MACH_OM2P)		+= mach-om2p.o
++obj-$(CONFIG_ATH79_MACH_OM5P)		+= mach-om5p.o
++obj-$(CONFIG_ATH79_MACH_ONION_OMEGA)  += mach-onion-omega.o
++obj-$(CONFIG_ATH79_MACH_PB42)		+= mach-pb42.o
+ obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
++obj-$(CONFIG_ATH79_MACH_PB92)		+= mach-pb92.o
++obj-$(CONFIG_ATH79_MACH_QIHOO_C301)	+= mach-qihoo-c301.o
++obj-$(CONFIG_ATH79_MACH_R6100)		+= mach-r6100.o
++obj-$(CONFIG_ATH79_MACH_RB4XX)		+= mach-rb4xx.o
++obj-$(CONFIG_ATH79_MACH_RB750)		+= mach-rb750.o
++obj-$(CONFIG_ATH79_MACH_RB91X)		+= mach-rb91x.o
++obj-$(CONFIG_ATH79_MACH_RB922)		+= mach-rb922.o
++obj-$(CONFIG_ATH79_MACH_RB95X)		+= mach-rb95x.o
++obj-$(CONFIG_ATH79_MACH_RB2011)		+= mach-rb2011.o
++obj-$(CONFIG_ATH79_MACH_RBSXTLITE)	+= mach-rbsxtlite.o
++obj-$(CONFIG_ATH79_MACH_RW2458N)	+= mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_SMART_300)	+= mach-smart-300.o
++obj-$(CONFIG_ATH79_MACH_TEW_632BRP)	+= mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TEW_673GRU)	+= mach-tew-673gru.o
++obj-$(CONFIG_ATH79_MACH_TEW_712BR)	+= mach-tew-712br.o
++obj-$(CONFIG_ATH79_MACH_TEW_732BR)	+= mach-tew-732br.o
++obj-$(CONFIG_ATH79_MACH_TL_MR11U)	+= mach-tl-mr11u.o
++obj-$(CONFIG_ATH79_MACH_TL_MR13U)	+= mach-tl-mr13u.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3020)	+= mach-tl-mr3020.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3X20)	+= mach-tl-mr3x20.o
++obj-$(CONFIG_ATH79_MACH_TL_WAX50RE)     += mach-tl-wax50re.o
++obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2)	+= mach-tl-wa701nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2)	+= mach-tl-wa7210n-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2)	+= mach-tl-wa830re-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= mach-tl-wa901nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)	+= mach-tl-wa901nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2)  += mach-tl-wdr3320-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR3500)     += mach-tl-wdr3500.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR4300)     += mach-tl-wdr4300.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2)  += mach-tl-wdr6500-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4)	+= mach-tl-wr741nd-v4.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8)	+= mach-tl-wr841n-v8.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9)	+= mach-tl-wr841n-v9.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND)	+= mach-tl-wr941nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6)	+= mach-tl-wr941nd-v6.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2)	+= mach-tl-wr1041n-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND)	+= mach-tl-wr1043nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2)	+= mach-tl-wr1043nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WR2543N)	+= mach-tl-wr2543n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR703N)	+= mach-tl-wr703n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3)	+= mach-tl-wr720n-v3.o
++obj-$(CONFIG_ATH79_MACH_TUBE2H)		+= mach-tube2h.o
++obj-$(CONFIG_ATH79_MACH_UBNT)		+= mach-ubnt.o
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM)	+= mach-ubnt-xm.o
++obj-$(CONFIG_ATH79_MACH_WEIO)		+= mach-weio.o
++obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N)	+= mach-whr-hp-g300n.o
++obj-$(CONFIG_ATH79_MACH_WLAE_AG300N)	+= mach-wlae-ag300n.o
++obj-$(CONFIG_ATH79_MACH_WLR8100)	+= mach-wlr8100.o
++obj-$(CONFIG_ATH79_MACH_WNDAP360)	+= mach-wndap360.o
++obj-$(CONFIG_ATH79_MACH_WNDR3700)	+= mach-wndr3700.o
++obj-$(CONFIG_ATH79_MACH_WNDR4300)	+= mach-wndr4300.o
++obj-$(CONFIG_ATH79_MACH_WNR2000)	+= mach-wnr2000.o
++obj-$(CONFIG_ATH79_MACH_WNR2000_V3)	+= mach-wnr2000-v3.o
++obj-$(CONFIG_ATH79_MACH_WNR2000_V4)	+= mach-wnr2000-v4.o
++obj-$(CONFIG_ATH79_MACH_WNR2200)	+= mach-wnr2200.o
++obj-$(CONFIG_ATH79_MACH_WP543)		+= mach-wp543.o
++obj-$(CONFIG_ATH79_MACH_WPE72)		+= mach-wpe72.o
++obj-$(CONFIG_ATH79_MACH_WPJ344)	+= mach-wpj344.o
++obj-$(CONFIG_ATH79_MACH_WPJ531)	+= mach-wpj531.o
++obj-$(CONFIG_ATH79_MACH_WPJ558)	+= mach-wpj558.o
++obj-$(CONFIG_ATH79_MACH_WRT160NL)	+= mach-wrt160nl.o
++obj-$(CONFIG_ATH79_MACH_WRT400N)	+= mach-wrt400n.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH)	+= mach-wzr-hp-g300nh.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2)	+= mach-wzr-hp-g300nh2.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H)	+= mach-wzr-hp-ag300h.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H)	+= mach-wzr-hp-g450h.o
++obj-$(CONFIG_ATH79_MACH_WZR_450HP2)	+= mach-wzr-450hp2.o
++obj-$(CONFIG_ATH79_MACH_ZCN_1523H)	+= mach-zcn-1523h.o
++obj-$(CONFIG_ATH79_MACH_CARAMBOLA2)	+= mach-carambola2.o
++obj-$(CONFIG_ATH79_MACH_NBG6716)	+= mach-nbg6716.o
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/nvram.c linux-4.1.13/arch/mips/ath79/nvram.c
+--- linux-4.1.13.orig/arch/mips/ath79/nvram.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/nvram.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,80 @@
++/*
++ *  Atheros AR71xx minimal nvram support
++ *
++ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/vmalloc.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/string.h>
++
++#include "nvram.h"
++
++char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len)
++{
++	unsigned len = strlen(name);
++	char *cur, *last;
++
++	if (buf_len == 0 || len == 0)
++		return NULL;
++
++	if (buf_len < len)
++		return NULL;
++
++	if (len == 1)
++		return memchr(buf, (int) *name, buf_len);
++
++	last = (char *) buf + buf_len - len;
++	for (cur = (char *) buf; cur <= last; cur++)
++		if (cur[0] == name[0] && memcmp(cur, name, len) == 0)
++			return cur + len;
++
++	return NULL;
++}
++
++int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
++			       const char *name, char *mac)
++{
++	char *buf;
++	char *mac_str;
++	int ret;
++	int t;
++
++	buf = vmalloc(nvram_len);
++	if (!buf)
++		return -ENOMEM;
++
++	memcpy(buf, nvram, nvram_len);
++	buf[nvram_len - 1] = '\0';
++
++	mac_str = ath79_nvram_find_var(name, buf, nvram_len);
++	if (!mac_str) {
++		ret = -EINVAL;
++		goto free;
++	}
++
++	if (strlen(mac_str) == 19 && mac_str[0] == '"' && mac_str[18] == '"') {
++		mac_str[18] = 0;
++		mac_str++;
++	}
++
++	t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++		   &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
++
++	if (t != 6) {
++		ret = -EINVAL;
++		goto free;
++	}
++
++	ret = 0;
++
++free:
++	vfree(buf);
++	return ret;
++}
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/nvram.h linux-4.1.13/arch/mips/ath79/nvram.h
+--- linux-4.1.13.orig/arch/mips/ath79/nvram.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/nvram.h	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,19 @@
++/*
++ *  Atheros AR71xx minimal nvram support
++ *
++ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef _ATH79_NVRAM_H
++#define _ATH79_NVRAM_H
++
++char *ath79_nvram_find_var(const char *name, const char *buf,
++			   unsigned buf_len);
++int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
++			       const char *name, char *mac);
++
++#endif /* _ATH79_NVRAM_H */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/pci-ath9k-fixup.c linux-4.1.13/arch/mips/ath79/pci-ath9k-fixup.c
+--- linux-4.1.13.orig/arch/mips/ath79/pci-ath9k-fixup.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/pci-ath9k-fixup.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,126 @@
++/*
++ *  Atheros AP94 reference board PCI initialization
++ *
++ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/delay.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++struct ath9k_fixup {
++	u16		*cal_data;
++	unsigned	slot;
++};
++
++static int ath9k_num_fixups;
++static struct ath9k_fixup ath9k_fixups[2];
++
++static void ath9k_pci_fixup(struct pci_dev *dev)
++{
++	void __iomem *mem;
++	u16 *cal_data = NULL;
++	u16 cmd;
++	u32 bar0;
++	u32 val;
++	unsigned i;
++
++	for (i = 0; i < ath9k_num_fixups; i++) {
++		if (ath9k_fixups[i].cal_data == NULL)
++			continue;
++
++		if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
++			continue;
++
++		cal_data = ath9k_fixups[i].cal_data;
++		break;
++	}
++
++	if (cal_data == NULL)
++		return;
++
++	if (*cal_data != 0xa55a) {
++		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
++		return;
++	}
++
++	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
++
++	mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
++	if (!mem) {
++		pr_err("pci %s: ioremap error\n", pci_name(dev));
++		return;
++	}
++
++	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++
++	switch (ath79_soc) {
++	case ATH79_SOC_AR7161:
++		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
++				       AR71XX_PCI_MEM_BASE);
++		break;
++	case ATH79_SOC_AR7240:
++		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff);
++		break;
++
++	case ATH79_SOC_AR7241:
++	case ATH79_SOC_AR7242:
++		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
++		break;
++	case ATH79_SOC_AR9344:
++		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
++		break;
++
++	default:
++		BUG();
++	}
++
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++	/* set pointer to first reg address */
++	cal_data += 3;
++	while (*cal_data != 0xffff) {
++		u32 reg;
++		reg = *cal_data++;
++		val = *cal_data++;
++		val |= (*cal_data++) << 16;
++
++		__raw_writel(val, mem + reg);
++		udelay(100);
++	}
++
++	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
++	dev->vendor = val & 0xffff;
++	dev->device = (val >> 16) & 0xffff;
++
++	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
++	dev->revision = val & 0xff;
++	dev->class = val >> 8; /* upper 3 bytes */
++
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
++
++	iounmap(mem);
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
++
++void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data)
++{
++	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
++		return;
++
++	ath9k_fixups[ath9k_num_fixups].slot = slot;
++	ath9k_fixups[ath9k_num_fixups].cal_data = cal_data;
++	ath9k_num_fixups++;
++}
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/pci-ath9k-fixup.h linux-4.1.13/arch/mips/ath79/pci-ath9k-fixup.h
+--- linux-4.1.13.orig/arch/mips/ath79/pci-ath9k-fixup.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/pci-ath9k-fixup.h	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,6 @@
++#ifndef _PCI_ATH9K_FIXUP
++#define _PCI_ATH9K_FIXUP
++
++void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init;
++
++#endif /* _PCI_ATH9K_FIXUP */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/pci.c linux-4.1.13/arch/mips/ath79/pci.c
+--- linux-4.1.13.orig/arch/mips/ath79/pci.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/pci.c	2015-12-04 19:57:05.593998902 +0100
+@@ -13,6 +13,7 @@
+  */
+ 
+ #include <linux/init.h>
++#include <linux/export.h>
+ #include <linux/pci.h>
+ #include <linux/resource.h>
+ #include <linux/platform_device.h>
+@@ -25,6 +26,9 @@
+ static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+ static unsigned ath79_pci_nr_irqs __initdata;
+ 
++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
++
+ static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+ 	{
+ 		.slot	= 17,
+@@ -49,6 +53,15 @@
+ 	}
+ };
+ 
++static const struct ath79_pci_irq qca953x_pci_irq_map[] __initconst = {
++	{
++		.bus	= 0,
++		.slot	= 0,
++		.pin	= 1,
++		.irq	= ATH79_PCI_IRQ(0),
++	},
++};
++
+ static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = {
+ 	{
+ 		.bus	= 0,
+@@ -64,6 +77,21 @@
+ 	},
+ };
+ 
++static const struct ath79_pci_irq qca956x_pci_irq_map[] __initconst = {
++	{
++		.bus    = 0,
++		.slot   = 0,
++		.pin    = 1,
++		.irq    = ATH79_PCI_IRQ(0),
++	},
++	{
++		.bus    = 1,
++		.slot   = 0,
++		.pin    = 1,
++		.irq    = ATH79_PCI_IRQ(1),
++	},
++};
++
+ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+ {
+ 	int irq = -1;
+@@ -79,9 +107,15 @@
+ 			   soc_is_ar9344()) {
+ 			ath79_pci_irq_map = ar724x_pci_irq_map;
+ 			ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
++		} else if (soc_is_qca953x()) {
++			ath79_pci_irq_map = qca953x_pci_irq_map;
++			ath79_pci_nr_irqs = ARRAY_SIZE(qca953x_pci_irq_map);
+ 		} else if (soc_is_qca955x()) {
+ 			ath79_pci_irq_map = qca955x_pci_irq_map;
+ 			ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
++		} else if (soc_is_qca9561()) {
++			ath79_pci_irq_map = qca956x_pci_irq_map;
++			ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map);
+ 		} else {
+ 			pr_crit("pci %s: invalid irq map\n",
+ 				pci_name((struct pci_dev *) dev));
+@@ -212,12 +246,50 @@
+ 	return pdev;
+ }
+ 
++static inline bool ar71xx_is_pci_addr(unsigned long port)
++{
++	unsigned long phys = CPHYSADDR(port);
++
++	return (phys >= AR71XX_PCI_MEM_BASE &&
++		phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
++}
++
++static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
++{
++	return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
++}
++
++static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
++{
++	return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
++}
++
++unsigned long ath79_pci_swizzle_b(unsigned long port)
++{
++	if (__ath79_pci_swizzle_b)
++		return __ath79_pci_swizzle_b(port);
++
++	return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_b);
++
++unsigned long ath79_pci_swizzle_w(unsigned long port)
++{
++	if (__ath79_pci_swizzle_w)
++		return __ath79_pci_swizzle_w(port);
++
++	return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_w);
++
+ int __init ath79_register_pci(void)
+ {
+ 	struct platform_device *pdev = NULL;
+ 
+ 	if (soc_is_ar71xx()) {
+ 		pdev = ath79_register_pci_ar71xx();
++		__ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
++		__ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
+ 	} else if (soc_is_ar724x()) {
+ 		pdev = ath79_register_pci_ar724x(-1,
+ 						 AR724X_PCI_CFG_BASE,
+@@ -243,6 +315,15 @@
+ 						 AR724X_PCI_MEM_SIZE,
+ 						 0,
+ 						 ATH79_IP2_IRQ(0));
++	} else if (soc_is_qca9533()) {
++		pdev = ath79_register_pci_ar724x(0,
++						 QCA953X_PCI_CFG_BASE0,
++						 QCA953X_PCI_CTRL_BASE0,
++						 QCA953X_PCI_CRP_BASE0,
++						 QCA953X_PCI_MEM_BASE0,
++						 QCA953X_PCI_MEM_SIZE,
++						 0,
++						 ATH79_IP2_IRQ(0));
+ 	} else if (soc_is_qca9558()) {
+ 		pdev = ath79_register_pci_ar724x(0,
+ 						 QCA955X_PCI_CFG_BASE0,
+@@ -261,6 +342,15 @@
+ 						 QCA955X_PCI_MEM_SIZE,
+ 						 1,
+ 						 ATH79_IP3_IRQ(2));
++	} else if (soc_is_qca9561()) {
++		pdev = ath79_register_pci_ar724x(0,
++						 QCA956X_PCI_CFG_BASE1,
++						 QCA956X_PCI_CTRL_BASE1,
++						 QCA956X_PCI_CRP_BASE1,
++						 QCA956X_PCI_MEM_BASE1,
++						 QCA956X_PCI_MEM_SIZE,
++						 1,
++						 ATH79_IP3_IRQ(2));
+ 	} else {
+ 		/* No PCI support */
+ 		return -ENODEV;
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/prom.c linux-4.1.13/arch/mips/ath79/prom.c
+--- linux-4.1.13.orig/arch/mips/ath79/prom.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/prom.c	2015-12-04 19:57:05.482006229 +0100
+@@ -19,12 +19,114 @@
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
+ #include <asm/fw/fw.h>
++#include <asm/fw/myloader/myloader.h>
+ 
+ #include "common.h"
+ 
++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
++
++static void __init ath79_prom_append_cmdline(const char *name,
++					      const char *value)
++{
++	snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
++		 " %s=%s", name, value);
++	strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
++}
++
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++extern char __image_cmdline[];
++
++static int __init ath79_use_image_cmdline(void)
++{
++	char *p = __image_cmdline;
++	int replace = 0;
++
++	if (*p == '-') {
++		replace = 1;
++		p++;
++	}
++
++	if (*p == '\0')
++		return 0;
++
++	if (replace) {
++		strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
++	} else {
++		strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
++		strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
++	}
++
++	/* Validate and setup environment pointer */
++	if (fw_arg2 < CKSEG0)
++		_fw_envp = NULL;
++	else
++		_fw_envp = (int *)fw_arg2;
++
++	return 1;
++}
++#else
++static inline int ath79_use_image_cmdline(void) { return 0; }
++#endif
++
++static int __init ath79_prom_init_myloader(void)
++{
++	struct myloader_info *mylo;
++	char mac_buf[32];
++	unsigned char *mac;
++
++	mylo = myloader_get_info();
++	if (!mylo)
++		return 0;
++
++	switch (mylo->did) {
++	case DEVID_COMPEX_WP543:
++		ath79_prom_append_cmdline("board", "WP543");
++		break;
++	case DEVID_COMPEX_WPE72:
++		ath79_prom_append_cmdline("board", "WPE72");
++		break;
++	default:
++		pr_warn("prom: unknown device id: %x\n", mylo->did);
++		return 0;
++	}
++
++	mac = mylo->macs[0];
++	snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
++		 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++
++	ath79_prom_append_cmdline("ethaddr", mac_buf);
++
++	ath79_use_image_cmdline();
++
++	return 1;
++}
++
+ void __init prom_init(void)
+ {
+-	fw_init_cmdline();
++	const char *env;
++
++	if (ath79_prom_init_myloader())
++		return;
++
++	if (!ath79_use_image_cmdline())
++		fw_init_cmdline();
++
++	env = fw_getenv("ethaddr");
++	if (env)
++		ath79_prom_append_cmdline("ethaddr", env);
++
++	env = fw_getenv("board");
++	if (env) {
++		/* Workaround for buggy bootloaders */
++		if (strcmp(env, "RouterStation") == 0 ||
++		    strcmp(env, "Ubiquiti AR71xx-based board") == 0)
++			env = "UBNT-RS";
++
++		if (strcmp(env, "RouterStation PRO") == 0)
++			env = "UBNT-RSPRO";
++
++		ath79_prom_append_cmdline("board", env);
++	}
+ 
+ #ifdef CONFIG_BLK_DEV_INITRD
+ 	/* Read the initrd address from the firmware environment */
+@@ -34,6 +136,13 @@
+ 		initrd_end = initrd_start + fw_getenvl("initrd_size");
+ 	}
+ #endif
++
++	if (strstr(arcs_cmdline, "board=750Gr3") ||
++	    strstr(arcs_cmdline, "board=951G") ||
++	    strstr(arcs_cmdline, "board=2011L") ||
++	    strstr(arcs_cmdline, "board=711Gr100") ||
++	    strstr(arcs_cmdline, "board=922gs"))
++		ath79_prom_append_cmdline("console", "ttyS0,115200");
+ }
+ 
+ void __init prom_free_prom_memory(void)
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/routerboot.c linux-4.1.13/arch/mips/ath79/routerboot.c
+--- linux-4.1.13.orig/arch/mips/ath79/routerboot.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/routerboot.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,358 @@
++/*
++ *  RouterBoot helper routines
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#define pr_fmt(fmt) "rb: " fmt
++
++#include <linux/kernel.h>
++#include <linux/kobject.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/routerboot.h>
++#include <linux/rle.h>
++#include <linux/lzo.h>
++
++#include "routerboot.h"
++
++#define RB_BLOCK_SIZE		0x1000
++#define RB_ART_SIZE		0x10000
++#define RB_MAGIC_ERD		0x00455244	/* extended radio data */
++
++static struct rb_info rb_info;
++
++static u32 get_u32(void *buf)
++{
++	u8 *p = buf;
++
++	return ((u32) p[3] + ((u32) p[2] << 8) + ((u32) p[1] << 16) +
++	       ((u32) p[0] << 24));
++}
++
++static u16 get_u16(void *buf)
++{
++	u8 *p = buf;
++
++	return (u16) p[1] + ((u16) p[0] << 8);
++}
++
++__init int
++routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard)
++{
++	u32 magic_ref = hard ? RB_MAGIC_HARD : RB_MAGIC_SOFT;
++	u32 magic;
++	u32 cur = *offset;
++
++	while (cur < buflen) {
++		magic = get_u32(buf + cur);
++		if (magic == magic_ref) {
++			*offset = cur;
++			return 0;
++		}
++
++		cur += 0x1000;
++	}
++
++	return -ENOENT;
++}
++
++__init int
++routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
++		    u8 **tag_data, u16 *tag_len)
++{
++	uint32_t magic;
++	bool align = false;
++	int ret;
++
++	if (buflen < 4)
++		return -EINVAL;
++
++	magic = get_u32(buf);
++	switch (magic) {
++	case RB_MAGIC_ERD:
++		align = true;
++		/* fall trough */
++	case RB_MAGIC_HARD:
++		/* skip magic value */
++		buf += 4;
++		buflen -= 4;
++		break;
++
++	case RB_MAGIC_SOFT:
++		if (buflen < 8)
++			return -EINVAL;
++
++		/* skip magic and CRC value */
++		buf += 8;
++		buflen -= 8;
++
++		break;
++
++	default:
++		return -EINVAL;
++	}
++
++	ret = -ENOENT;
++	while (buflen > 2) {
++		u16 id;
++		u16 len;
++
++		len = get_u16(buf);
++		buf += 2;
++		buflen -= 2;
++
++		if (buflen < 2)
++			break;
++
++		id = get_u16(buf);
++		buf += 2;
++		buflen -= 2;
++
++		if (id == RB_ID_TERMINATOR)
++			break;
++
++		if (buflen < len)
++			break;
++
++		if (id == tag_id) {
++			if (tag_len)
++				*tag_len = len;
++			if (tag_data)
++				*tag_data = buf;
++			ret = 0;
++			break;
++		}
++
++		if (align)
++			len = (len + 3) / 4;
++
++		buf += len;
++		buflen -= len;
++	}
++
++	return ret;
++}
++
++static inline int
++rb_find_hard_cfg_tag(u16 tag_id, u8 **tag_data, u16 *tag_len)
++{
++	if (!rb_info.hard_cfg_data ||
++	    !rb_info.hard_cfg_size)
++		return -ENOENT;
++
++	return routerboot_find_tag(rb_info.hard_cfg_data,
++				   rb_info.hard_cfg_size,
++				   tag_id, tag_data, tag_len);
++}
++
++__init const char *
++rb_get_board_name(void)
++{
++	u16 tag_len;
++	u8 *tag;
++	int err;
++
++	err = rb_find_hard_cfg_tag(RB_ID_BOARD_NAME, &tag, &tag_len);
++	if (err)
++		return NULL;
++
++	return tag;
++}
++
++__init u32
++rb_get_hw_options(void)
++{
++	u16 tag_len;
++	u8 *tag;
++	int err;
++
++	err = rb_find_hard_cfg_tag(RB_ID_HW_OPTIONS, &tag, &tag_len);
++	if (err)
++		return 0;
++
++	return get_u32(tag);
++}
++
++static void * __init
++__rb_get_wlan_data(u16 id)
++{
++	u16 tag_len;
++	u8 *tag;
++	void *buf;
++	int err;
++	u32 magic;
++	size_t src_done;
++	size_t dst_done;
++
++	err = rb_find_hard_cfg_tag(RB_ID_WLAN_DATA, &tag, &tag_len);
++	if (err) {
++		pr_err("no calibration data found\n");
++		goto err;
++	}
++
++	buf = kmalloc(RB_ART_SIZE, GFP_KERNEL);
++	if (buf == NULL) {
++		pr_err("no memory for calibration data\n");
++		goto err;
++	}
++
++	magic = get_u32(tag);
++	if (magic == RB_MAGIC_ERD) {
++		u8 *erd_data;
++		u16 erd_len;
++
++		if (id == 0)
++			goto err_free;
++
++		err = routerboot_find_tag(tag, tag_len, id,
++					  &erd_data, &erd_len);
++		if (err) {
++			pr_err("no ERD data found for id %u\n", id);
++			goto err_free;
++		}
++
++		dst_done = RB_ART_SIZE;
++		err = lzo1x_decompress_safe(erd_data, erd_len, buf, &dst_done);
++		if (err) {
++			pr_err("unable to decompress calibration data %d\n",
++			       err);
++			goto err_free;
++		}
++	} else {
++		if (id != 0)
++			goto err_free;
++
++		err = rle_decode((char *) tag, tag_len, buf, RB_ART_SIZE,
++				 &src_done, &dst_done);
++		if (err) {
++			pr_err("unable to decode calibration data\n");
++			goto err_free;
++		}
++	}
++
++	return buf;
++
++err_free:
++	kfree(buf);
++err:
++	return NULL;
++}
++
++__init void *
++rb_get_wlan_data(void)
++{
++	return __rb_get_wlan_data(0);
++}
++
++__init void *
++rb_get_ext_wlan_data(u16 id)
++{
++	return __rb_get_wlan_data(id);
++}
++
++__init const struct rb_info *
++rb_init_info(void *data, unsigned int size)
++{
++	unsigned int offset;
++
++	if (size == 0 || (size % RB_BLOCK_SIZE) != 0)
++		return NULL;
++
++	for (offset = 0; offset < size; offset += RB_BLOCK_SIZE) {
++		u32 magic;
++
++		magic = get_u32(data + offset);
++		switch (magic) {
++		case RB_MAGIC_HARD:
++			rb_info.hard_cfg_offs = offset;
++			break;
++
++		case RB_MAGIC_SOFT:
++			rb_info.soft_cfg_offs = offset;
++			break;
++		}
++	}
++
++	if (!rb_info.hard_cfg_offs) {
++		pr_err("could not find a valid RouterBOOT hard config\n");
++		return NULL;
++	}
++
++	if (!rb_info.soft_cfg_offs) {
++		pr_err("could not find a valid RouterBOOT soft config\n");
++		return NULL;
++	}
++
++	rb_info.hard_cfg_size = RB_BLOCK_SIZE;
++	rb_info.hard_cfg_data = kmemdup(data + rb_info.hard_cfg_offs,
++					RB_BLOCK_SIZE, GFP_KERNEL);
++	if (!rb_info.hard_cfg_data)
++		return NULL;
++
++	rb_info.board_name = rb_get_board_name();
++	rb_info.hw_options = rb_get_hw_options();
++
++	return &rb_info;
++}
++
++static char *rb_ext_wlan_data;
++
++static ssize_t
++rb_ext_wlan_data_read(struct file *filp, struct kobject *kobj,
++		      struct bin_attribute *attr, char *buf,
++		      loff_t off, size_t count)
++{
++         if (off + count > attr->size)
++                 return -EFBIG;
++
++         memcpy(buf, &rb_ext_wlan_data[off], count);
++
++         return count;
++}
++
++static const struct bin_attribute rb_ext_wlan_data_attr = {
++	.attr = {
++		.name = "ext_wlan_data",
++		.mode = S_IRUSR | S_IWUSR,
++	},
++	.read = rb_ext_wlan_data_read,
++	.size = RB_ART_SIZE,
++};
++
++static int __init rb_sysfs_init(void)
++{
++	struct kobject *rb_kobj;
++	int ret;
++
++	rb_ext_wlan_data = rb_get_ext_wlan_data(1);
++	if (rb_ext_wlan_data == NULL)
++		return -ENOENT;
++
++	rb_kobj = kobject_create_and_add("routerboot", firmware_kobj);
++	if (rb_kobj == NULL) {
++		ret = -ENOMEM;
++		pr_err("unable to create sysfs entry\n");
++		goto err_free_wlan_data;
++	}
++
++	ret = sysfs_create_bin_file(rb_kobj, &rb_ext_wlan_data_attr);
++	if (ret) {
++		pr_err("unable to create sysfs file, %d\n", ret);
++		goto err_put_kobj;
++	}
++
++	return 0;
++
++err_put_kobj:
++	kobject_put(rb_kobj);
++err_free_wlan_data:
++	kfree(rb_ext_wlan_data);
++	return ret;
++}
++
++late_initcall(rb_sysfs_init);
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/routerboot.h linux-4.1.13/arch/mips/ath79/routerboot.h
+--- linux-4.1.13.orig/arch/mips/ath79/routerboot.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/routerboot.h	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,63 @@
++/*
++ *  RouterBoot definitions
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef _ATH79_ROUTERBOOT_H_
++#define _ATH79_ROUTERBOOT_H_
++
++struct rb_info {
++	unsigned int hard_cfg_offs;
++	unsigned int hard_cfg_size;
++	void *hard_cfg_data;
++	unsigned int soft_cfg_offs;
++
++	const char *board_name;
++	u32 hw_options;
++};
++
++#ifdef CONFIG_ATH79_ROUTERBOOT
++const struct rb_info *rb_init_info(void *data, unsigned int size);
++void *rb_get_wlan_data(void);
++void *rb_get_ext_wlan_data(u16 id);
++
++int routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
++			u8 **tag_data, u16 *tag_len);
++int routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard);
++#else
++static inline const struct rb_info *
++rb_init_info(void *data, unsigned int size)
++{
++	return NULL;
++}
++
++static inline void *rb_get_wlan_data(void)
++{
++	return NULL;
++}
++
++static inline void *rb_get_wlan_data(u16 id)
++{
++	return NULL;
++}
++
++static inline int
++routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
++		    u8 **tag_data, u16 *tag_len)
++{
++	return -ENOENT;
++}
++
++static inline int
++routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard)
++{
++	return -ENOENT;
++}
++#endif
++
++#endif /* _ATH79_ROUTERBOOT_H_ */
+diff -Nur linux-4.1.13.orig/arch/mips/ath79/setup.c linux-4.1.13/arch/mips/ath79/setup.c
+--- linux-4.1.13.orig/arch/mips/ath79/setup.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/ath79/setup.c	2015-12-04 19:57:04.482071652 +0100
+@@ -40,6 +40,7 @@
+ 
+ static void ath79_restart(char *command)
+ {
++	local_irq_disable();
+ 	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
+ 	for (;;)
+ 		if (cpu_wait)
+@@ -59,6 +60,7 @@
+ 	u32 major;
+ 	u32 minor;
+ 	u32 rev = 0;
++	u32 ver = 1;
+ 
+ 	id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID);
+ 	major = id & REV_ID_MAJOR_MASK;
+@@ -151,6 +153,17 @@
+ 		rev = id & AR934X_REV_ID_REVISION_MASK;
+ 		break;
+ 
++	case REV_ID_MAJOR_QCA9533_V2:
++		ver = 2;
++		ath79_soc_rev = 2;
++		/* drop through */
++
++	case REV_ID_MAJOR_QCA9533:
++		ath79_soc = ATH79_SOC_QCA9533;
++		chip = "9533";
++		rev = id & QCA953X_REV_ID_REVISION_MASK;
++		break;
++
+ 	case REV_ID_MAJOR_QCA9556:
+ 		ath79_soc = ATH79_SOC_QCA9556;
+ 		chip = "9556";
+@@ -163,14 +176,30 @@
+ 		rev = id & QCA955X_REV_ID_REVISION_MASK;
+ 		break;
+ 
++	case REV_ID_MAJOR_TP9343:
++		ath79_soc = ATH79_SOC_TP9343;
++		chip = "9343";
++		rev = id & QCA956X_REV_ID_REVISION_MASK;
++		break;
++
++	case REV_ID_MAJOR_QCA9561:
++		ath79_soc = ATH79_SOC_QCA9561;
++		chip = "9561";
++		rev = id & QCA956X_REV_ID_REVISION_MASK;
++		break;
++
+ 	default:
+ 		panic("ath79: unknown SoC, id:0x%08x", id);
+ 	}
+ 
+-	ath79_soc_rev = rev;
++	if (ver == 1)
++		ath79_soc_rev = rev;
+ 
+-	if (soc_is_qca955x())
+-		sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
++	if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca9561())
++		sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
++			chip, ver, rev);
++	else if (soc_is_tp9343())
++		sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u",
+ 			chip, rev);
+ 	else
+ 		sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
+@@ -235,6 +264,8 @@
+ 	mips_hpt_frequency = cpu_clk_rate / 2;
+ }
+ 
++__setup("board=", mips_machtype_setup);
++
+ static int __init ath79_setup(void)
+ {
+ 	ath79_gpio_init();
+diff -Nur linux-4.1.13.orig/arch/mips/fw/lib/cmdline.c linux-4.1.13/arch/mips/fw/lib/cmdline.c
+--- linux-4.1.13.orig/arch/mips/fw/lib/cmdline.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/fw/lib/cmdline.c	2015-12-04 19:57:04.014102269 +0100
+@@ -35,6 +35,7 @@
+ 	else
+ 		_fw_envp = (int *)fw_arg2;
+ 
++	arcs_cmdline[0] = '\0';
+ 	for (i = 1; i < fw_argc; i++) {
+ 		strlcat(arcs_cmdline, fw_argv(i), COMMAND_LINE_SIZE);
+ 		if (i < (fw_argc - 1))
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/checksum.h linux-4.1.13/arch/mips/include/asm/checksum.h
+--- linux-4.1.13.orig/arch/mips/include/asm/checksum.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/checksum.h	2015-12-04 19:57:05.913977967 +0100
+@@ -134,26 +134,30 @@
+ 	const unsigned int *stop = word + ihl;
+ 	unsigned int csum;
+ 	int carry;
++	unsigned int w;
+ 
+-	csum = word[0];
+-	csum += word[1];
+-	carry = (csum < word[1]);
++	csum = net_hdr_word(word++);
++
++	w = net_hdr_word(word++);
++	csum += w;
++	carry = (csum < w);
+ 	csum += carry;
+ 
+-	csum += word[2];
+-	carry = (csum < word[2]);
++	w = net_hdr_word(word++);
++	csum += w;
++	carry = (csum < w);
+ 	csum += carry;
+ 
+-	csum += word[3];
+-	carry = (csum < word[3]);
++	w = net_hdr_word(word++);
++	csum += w;
++	carry = (csum < w);
+ 	csum += carry;
+ 
+-	word += 4;
+ 	do {
+-		csum += *word;
+-		carry = (csum < *word);
++		w = net_hdr_word(word++);
++		csum += w;
++		carry = (csum < w);
+ 		csum += carry;
+-		word++;
+ 	} while (word != stop);
+ 
+ 	return csum_fold(csum);
+@@ -212,73 +216,6 @@
+ 	return csum_fold(csum_partial(buff, len, 0));
+ }
+ 
+-#define _HAVE_ARCH_IPV6_CSUM
+-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+-					  const struct in6_addr *daddr,
+-					  __u32 len, unsigned short proto,
+-					  __wsum sum)
+-{
+-	__wsum tmp;
+-
+-	__asm__(
+-	"	.set	push		# csum_ipv6_magic\n"
+-	"	.set	noreorder	\n"
+-	"	.set	noat		\n"
+-	"	addu	%0, %5		# proto (long in network byte order)\n"
+-	"	sltu	$1, %0, %5	\n"
+-	"	addu	%0, $1		\n"
+-
+-	"	addu	%0, %6		# csum\n"
+-	"	sltu	$1, %0, %6	\n"
+-	"	lw	%1, 0(%2)	# four words source address\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 4(%2)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 8(%2)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 12(%2)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 0(%3)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 4(%3)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 8(%3)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	lw	%1, 12(%3)	\n"
+-	"	addu	%0, $1		\n"
+-	"	addu	%0, %1		\n"
+-	"	sltu	$1, %0, %1	\n"
+-
+-	"	addu	%0, $1		# Add final carry\n"
+-	"	.set	pop"
+-	: "=&r" (sum), "=&r" (tmp)
+-	: "r" (saddr), "r" (daddr),
+-	  "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
+-
+-	return csum_fold(sum);
+-}
+-
+ #include <asm-generic/checksum.h>
+ #endif /* CONFIG_GENERIC_CSUM */
+ 
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/fw/myloader/myloader.h linux-4.1.13/arch/mips/include/asm/fw/myloader/myloader.h
+--- linux-4.1.13.orig/arch/mips/include/asm/fw/myloader/myloader.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/fw/myloader/myloader.h	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,34 @@
++/*
++ *  Compex's MyLoader specific definitions
++ *
++ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#ifndef _ASM_MIPS_FW_MYLOADER_H
++#define _ASM_MIPS_FW_MYLOADER_H
++
++#include <linux/myloader.h>
++
++struct myloader_info {
++	uint32_t	vid;
++	uint32_t	did;
++	uint32_t	svid;
++	uint32_t	sdid;
++	uint8_t		macs[MYLO_ETHADDR_COUNT][6];
++};
++
++#ifdef CONFIG_MYLOADER
++extern struct myloader_info *myloader_get_info(void) __init;
++#else
++static inline struct myloader_info *myloader_get_info(void)
++{
++	return NULL;
++}
++#endif /* CONFIG_MYLOADER */
++
++#endif /* _ASM_MIPS_FW_MYLOADER_H */
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/ag71xx_platform.h linux-4.1.13/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/ag71xx_platform.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mach-ath79/ag71xx_platform.h	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,65 @@
++/*
++ *  Atheros AR71xx SoC specific platform data definitions
++ *
++ *  Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_PLATFORM_H
++#define __ASM_MACH_ATH79_PLATFORM_H
++
++#include <linux/if_ether.h>
++#include <linux/skbuff.h>
++#include <linux/phy.h>
++#include <linux/spi/spi.h>
++
++struct ag71xx_switch_platform_data {
++	u8		phy4_mii_en:1;
++	u8		phy_poll_mask;
++};
++
++struct ag71xx_platform_data {
++	phy_interface_t	phy_if_mode;
++	u32		phy_mask;
++	int		speed;
++	int		duplex;
++	u32		reset_bit;
++	u8		mac_addr[ETH_ALEN];
++	struct device	*mii_bus_dev;
++
++	u8		has_gbit:1;
++	u8		is_ar91xx:1;
++	u8		is_ar7240:1;
++	u8		is_ar724x:1;
++	u8		has_ar8216:1;
++
++	struct ag71xx_switch_platform_data *switch_data;
++
++	void		(*ddr_flush)(void);
++	void		(*set_speed)(int speed);
++
++	u32		fifo_cfg1;
++	u32		fifo_cfg2;
++	u32		fifo_cfg3;
++
++	unsigned int	max_frame_len;
++	unsigned int	desc_pktlen_mask;
++};
++
++struct ag71xx_mdio_platform_data {
++	u32		phy_mask;
++	u8		builtin_switch:1;
++	u8		is_ar7240:1;
++	u8		is_ar9330:1;
++	u8		is_ar934x:1;
++	unsigned long	mdio_clock;
++	unsigned long	ref_clock;
++
++	void		(*reset)(struct mii_bus *bus);
++};
++
++#endif /* __ASM_MACH_ATH79_PLATFORM_H */
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/ar71xx_regs.h linux-4.1.13/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/ar71xx_regs.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mach-ath79/ar71xx_regs.h	2015-12-04 19:57:05.893979276 +0100
+@@ -20,6 +20,10 @@
+ #include <linux/bitops.h>
+ 
+ #define AR71XX_APB_BASE		0x18000000
++#define AR71XX_GE0_BASE		0x19000000
++#define AR71XX_GE0_SIZE		0x10000
++#define AR71XX_GE1_BASE		0x1a000000
++#define AR71XX_GE1_SIZE		0x10000
+ #define AR71XX_EHCI_BASE	0x1b000000
+ #define AR71XX_EHCI_SIZE	0x1000
+ #define AR71XX_OHCI_BASE	0x1c000000
+@@ -39,6 +43,8 @@
+ #define AR71XX_PLL_SIZE		0x100
+ #define AR71XX_RESET_BASE	(AR71XX_APB_BASE + 0x00060000)
+ #define AR71XX_RESET_SIZE	0x100
++#define AR71XX_MII_BASE		(AR71XX_APB_BASE + 0x00070000)
++#define AR71XX_MII_SIZE		0x100
+ 
+ #define AR71XX_PCI_MEM_BASE	0x10000000
+ #define AR71XX_PCI_MEM_SIZE	0x07000000
+@@ -81,18 +87,39 @@
+ 
+ #define AR933X_UART_BASE	(AR71XX_APB_BASE + 0x00020000)
+ #define AR933X_UART_SIZE	0x14
++#define AR933X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
++#define AR933X_GMAC_SIZE	0x04
+ #define AR933X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+ #define AR933X_WMAC_SIZE	0x20000
+ #define AR933X_EHCI_BASE	0x1b000000
+ #define AR933X_EHCI_SIZE	0x1000
+ 
++#define AR934X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
++#define AR934X_GMAC_SIZE	0x14
+ #define AR934X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE	0x20000
+ #define AR934X_EHCI_BASE	0x1b000000
+ #define AR934X_EHCI_SIZE	0x200
++#define AR934X_NFC_BASE		0x1b000200
++#define AR934X_NFC_SIZE		0xb8
+ #define AR934X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
+ #define AR934X_SRIF_SIZE	0x1000
+ 
++#define QCA953X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
++#define QCA953X_GMAC_SIZE	0x14
++#define QCA953X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
++#define QCA953X_WMAC_SIZE	0x20000
++#define QCA953X_EHCI_BASE	0x1b000000
++#define QCA953X_EHCI_SIZE	0x200
++#define QCA953X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
++#define QCA953X_SRIF_SIZE	0x1000
++
++#define QCA953X_PCI_CFG_BASE0	0x14000000
++#define QCA953X_PCI_CTRL_BASE0	(AR71XX_APB_BASE + 0x000f0000)
++#define QCA953X_PCI_CRP_BASE0	(AR71XX_APB_BASE + 0x000c0000)
++#define QCA953X_PCI_MEM_BASE0	0x10000000
++#define QCA953X_PCI_MEM_SIZE	0x02000000
++
+ #define QCA955X_PCI_MEM_BASE0	0x10000000
+ #define QCA955X_PCI_MEM_BASE1	0x12000000
+ #define QCA955X_PCI_MEM_SIZE	0x02000000
+@@ -106,11 +133,40 @@
+ #define QCA955X_PCI_CTRL_BASE1	(AR71XX_APB_BASE + 0x00280000)
+ #define QCA955X_PCI_CTRL_SIZE	0x100
+ 
++#define QCA955X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
++#define QCA955X_GMAC_SIZE	0x40
+ #define QCA955X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+ #define QCA955X_WMAC_SIZE	0x20000
+ #define QCA955X_EHCI0_BASE	0x1b000000
+ #define QCA955X_EHCI1_BASE	0x1b400000
+ #define QCA955X_EHCI_SIZE	0x1000
++#define QCA955X_NFC_BASE	0x1b800200
++#define QCA955X_NFC_SIZE	0xb8
++
++#define QCA956X_PCI_MEM_BASE1	0x12000000
++#define QCA956X_PCI_MEM_SIZE	0x02000000
++#define QCA956X_PCI_CFG_BASE1	0x16000000
++#define QCA956X_PCI_CFG_SIZE	0x1000
++#define QCA956X_PCI_CRP_BASE1	(AR71XX_APB_BASE + 0x00250000)
++#define QCA956X_PCI_CRP_SIZE	0x1000
++#define QCA956X_PCI_CTRL_BASE1	(AR71XX_APB_BASE + 0x00280000)
++#define QCA956X_PCI_CTRL_SIZE	0x100
++
++#define QCA956X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
++#define QCA956X_WMAC_SIZE	0x20000
++#define QCA956X_EHCI0_BASE	0x1b000000
++#define QCA956X_EHCI1_BASE	0x1b400000
++#define QCA956X_EHCI_SIZE	0x200
++#define QCA956X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
++#define QCA956X_GMAC_SIZE	0x64
++
++#define AR9300_OTP_BASE		0x14000
++#define AR9300_OTP_STATUS	0x15f18
++#define AR9300_OTP_STATUS_TYPE		0x7
++#define AR9300_OTP_STATUS_VALID		0x4
++#define AR9300_OTP_STATUS_ACCESS_BUSY	0x2
++#define AR9300_OTP_STATUS_SM_BUSY	0x1
++#define AR9300_OTP_READ_DATA	0x15f1c
+ 
+ /*
+  * DDR_CTRL block
+@@ -149,6 +205,12 @@
+ #define AR934X_DDR_REG_FLUSH_PCIE	0xa8
+ #define AR934X_DDR_REG_FLUSH_WMAC	0xac
+ 
++#define QCA953X_DDR_REG_FLUSH_GE0	0x9c
++#define QCA953X_DDR_REG_FLUSH_GE1	0xa0
++#define QCA953X_DDR_REG_FLUSH_USB	0xa4
++#define QCA953X_DDR_REG_FLUSH_PCIE	0xa8
++#define QCA953X_DDR_REG_FLUSH_WMAC	0xac
++
+ /*
+  * PLL block
+  */
+@@ -166,6 +228,9 @@
+ #define AR71XX_AHB_DIV_SHIFT		20
+ #define AR71XX_AHB_DIV_MASK		0x7
+ 
++#define AR71XX_ETH0_PLL_SHIFT		17
++#define AR71XX_ETH1_PLL_SHIFT		19
++
+ #define AR724X_PLL_REG_CPU_CONFIG	0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG	0x18
+ 
+@@ -178,6 +243,8 @@
+ #define AR724X_DDR_DIV_SHIFT		22
+ #define AR724X_DDR_DIV_MASK		0x3
+ 
++#define AR7242_PLL_REG_ETH0_INT_CLOCK	0x2c
++
+ #define AR913X_PLL_REG_CPU_CONFIG	0x00
+ #define AR913X_PLL_REG_ETH_CONFIG	0x04
+ #define AR913X_PLL_REG_ETH0_INT_CLOCK	0x14
+@@ -190,6 +257,9 @@
+ #define AR913X_AHB_DIV_SHIFT		19
+ #define AR913X_AHB_DIV_MASK		0x1
+ 
++#define AR913X_ETH0_PLL_SHIFT		20
++#define AR913X_ETH1_PLL_SHIFT		22
++
+ #define AR933X_PLL_CPU_CONFIG_REG	0x00
+ #define AR933X_PLL_CLOCK_CTRL_REG	0x08
+ 
+@@ -211,6 +281,8 @@
+ #define AR934X_PLL_CPU_CONFIG_REG		0x00
+ #define AR934X_PLL_DDR_CONFIG_REG		0x04
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG		0x08
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG	0x24
++#define AR934X_PLL_ETH_XMII_CONTROL_REG		0x2c
+ 
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
+@@ -243,9 +315,51 @@
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL	BIT(21)
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL	BIT(24)
+ 
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL	BIT(6)
++
++#define QCA953X_PLL_CPU_CONFIG_REG		0x00
++#define QCA953X_PLL_DDR_CONFIG_REG		0x04
++#define QCA953X_PLL_CLK_CTRL_REG		0x08
++#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG	0x24
++#define QCA953X_PLL_ETH_XMII_CONTROL_REG	0x2c
++#define QCA953X_PLL_ETH_SGMII_CONTROL_REG	0x48
++
++#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
++#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
++#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT	6
++#define QCA953X_PLL_CPU_CONFIG_NINT_MASK	0x3f
++#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT	12
++#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK	0x1f
++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT	19
++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK	0x7
++
++#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT	0
++#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK	0x3ff
++#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT	10
++#define QCA953X_PLL_DDR_CONFIG_NINT_MASK	0x3f
++#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT	16
++#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK	0x1f
++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT	23
++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK	0x7
++
++#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
++#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
++#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS		BIT(4)
++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT		5
++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK		0x1f
++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT		10
++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK		0x1f
++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT		15
++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK		0x1f
++#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL		BIT(20)
++#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
++#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
++
+ #define QCA955X_PLL_CPU_CONFIG_REG		0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG		0x04
+ #define QCA955X_PLL_CLK_CTRL_REG		0x08
++#define QCA955X_PLL_ETH_XMII_CONTROL_REG	0x28
++#define QCA955X_PLL_ETH_SGMII_CONTROL_REG	0x48
+ 
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
+@@ -278,6 +392,49 @@
+ #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
+ #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
+ 
++#define QCA956X_PLL_CPU_CONFIG_REG			0x00
++#define QCA956X_PLL_CPU_CONFIG1_REG			0x04
++#define QCA956X_PLL_DDR_CONFIG_REG			0x08
++#define QCA956X_PLL_DDR_CONFIG1_REG			0x0c
++#define QCA956X_PLL_CLK_CTRL_REG			0x10
++
++#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT		12
++#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK		0x1f
++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT		19
++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK		0x7
++
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT		0
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK		0x1f
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT		5
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK		0x1fff
++#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT		18
++#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK		0x1ff
++
++#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT		16
++#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK		0x1f
++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT		23
++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK		0x7
++
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT		0
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK		0x1f
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT		5
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK		0x1fff
++#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT		18
++#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK		0x1ff
++
++#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
++#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
++#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS		BIT(4)
++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT		5
++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK		0x1f
++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT		10
++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK		0x1f
++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT		15
++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK		0x1f
++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL	BIT(20)
++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL	BIT(21)
++#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
++
+ /*
+  * USB_CONFIG block
+  */
+@@ -317,10 +474,19 @@
+ #define AR934X_RESET_REG_BOOTSTRAP		0xb0
+ #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
+ 
++#define QCA953X_RESET_REG_RESET_MODULE		0x1c
++#define QCA953X_RESET_REG_BOOTSTRAP		0xb0
++#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
++
+ #define QCA955X_RESET_REG_RESET_MODULE		0x1c
+ #define QCA955X_RESET_REG_BOOTSTRAP		0xb0
+ #define QCA955X_RESET_REG_EXT_INT_STATUS	0xac
+ 
++#define QCA956X_RESET_REG_RESET_MODULE		0x1c
++#define QCA956X_RESET_REG_BOOTSTRAP		0xb0
++#define QCA956X_RESET_REG_EXT_INT_STATUS	0xac
++
++#define MISC_INT_MIPS_SI_TIMERINT_MASK	BIT(28)
+ #define MISC_INT_ETHSW			BIT(12)
+ #define MISC_INT_TIMER4			BIT(10)
+ #define MISC_INT_TIMER3			BIT(9)
+@@ -370,16 +536,104 @@
+ #define AR913X_RESET_USB_HOST		BIT(5)
+ #define AR913X_RESET_USB_PHY		BIT(4)
+ 
++#define AR933X_RESET_GE1_MDIO		BIT(23)
++#define AR933X_RESET_GE0_MDIO		BIT(22)
++#define AR933X_RESET_GE1_MAC		BIT(13)
+ #define AR933X_RESET_WMAC		BIT(11)
++#define AR933X_RESET_GE0_MAC		BIT(9)
+ #define AR933X_RESET_USB_HOST		BIT(5)
+ #define AR933X_RESET_USB_PHY		BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE	BIT(3)
+ 
++#define AR934X_RESET_HOST		BIT(31)
++#define AR934X_RESET_SLIC		BIT(30)
++#define AR934X_RESET_HDMA		BIT(29)
++#define AR934X_RESET_EXTERNAL		BIT(28)
++#define AR934X_RESET_RTC		BIT(27)
++#define AR934X_RESET_PCIE_EP_INT	BIT(26)
++#define AR934X_RESET_CHKSUM_ACC		BIT(25)
++#define AR934X_RESET_FULL_CHIP		BIT(24)
++#define AR934X_RESET_GE1_MDIO		BIT(23)
++#define AR934X_RESET_GE0_MDIO		BIT(22)
++#define AR934X_RESET_CPU_NMI		BIT(21)
++#define AR934X_RESET_CPU_COLD		BIT(20)
++#define AR934X_RESET_HOST_RESET_INT	BIT(19)
++#define AR934X_RESET_PCIE_EP		BIT(18)
++#define AR934X_RESET_UART1		BIT(17)
++#define AR934X_RESET_DDR		BIT(16)
++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define AR934X_RESET_NANDF		BIT(14)
++#define AR934X_RESET_GE1_MAC		BIT(13)
++#define AR934X_RESET_ETH_SWITCH_ANALOG	BIT(12)
+ #define AR934X_RESET_USB_PHY_ANALOG	BIT(11)
++#define AR934X_RESET_HOST_DMA_INT	BIT(10)
++#define AR934X_RESET_GE0_MAC		BIT(9)
++#define AR934X_RESET_ETH_SWITCH		BIT(8)
++#define AR934X_RESET_PCIE_PHY		BIT(7)
++#define AR934X_RESET_PCIE		BIT(6)
+ #define AR934X_RESET_USB_HOST		BIT(5)
+ #define AR934X_RESET_USB_PHY		BIT(4)
+ #define AR934X_RESET_USBSUS_OVERRIDE	BIT(3)
++#define AR934X_RESET_LUT		BIT(2)
++#define AR934X_RESET_MBOX		BIT(1)
++#define AR934X_RESET_I2S		BIT(0)
++
++#define QCA953X_RESET_USB_EXT_PWR	BIT(29)
++#define QCA953X_RESET_EXTERNAL		BIT(28)
++#define QCA953X_RESET_RTC		BIT(27)
++#define QCA953X_RESET_FULL_CHIP		BIT(24)
++#define QCA953X_RESET_GE1_MDIO		BIT(23)
++#define QCA953X_RESET_GE0_MDIO		BIT(22)
++#define QCA953X_RESET_CPU_NMI		BIT(21)
++#define QCA953X_RESET_CPU_COLD		BIT(20)
++#define QCA953X_RESET_DDR		BIT(16)
++#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define QCA953X_RESET_GE1_MAC		BIT(13)
++#define QCA953X_RESET_ETH_SWITCH_ANALOG	BIT(12)
++#define QCA953X_RESET_USB_PHY_ANALOG	BIT(11)
++#define QCA953X_RESET_GE0_MAC		BIT(9)
++#define QCA953X_RESET_ETH_SWITCH	BIT(8)
++#define QCA953X_RESET_PCIE_PHY		BIT(7)
++#define QCA953X_RESET_PCIE		BIT(6)
++#define QCA953X_RESET_USB_HOST		BIT(5)
++#define QCA953X_RESET_USB_PHY		BIT(4)
++#define QCA953X_RESET_USBSUS_OVERRIDE	BIT(3)
++
++#define QCA955X_RESET_HOST		BIT(31)
++#define QCA955X_RESET_SLIC		BIT(30)
++#define QCA955X_RESET_HDMA		BIT(29)
++#define QCA955X_RESET_EXTERNAL		BIT(28)
++#define QCA955X_RESET_RTC		BIT(27)
++#define QCA955X_RESET_PCIE_EP_INT	BIT(26)
++#define QCA955X_RESET_CHKSUM_ACC	BIT(25)
++#define QCA955X_RESET_FULL_CHIP		BIT(24)
++#define QCA955X_RESET_GE1_MDIO		BIT(23)
++#define QCA955X_RESET_GE0_MDIO		BIT(22)
++#define QCA955X_RESET_CPU_NMI		BIT(21)
++#define QCA955X_RESET_CPU_COLD		BIT(20)
++#define QCA955X_RESET_HOST_RESET_INT	BIT(19)
++#define QCA955X_RESET_PCIE_EP		BIT(18)
++#define QCA955X_RESET_UART1		BIT(17)
++#define QCA955X_RESET_DDR		BIT(16)
++#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define QCA955X_RESET_NANDF		BIT(14)
++#define QCA955X_RESET_GE1_MAC		BIT(13)
++#define QCA955X_RESET_SGMII_ANALOG	BIT(12)
++#define QCA955X_RESET_USB_PHY_ANALOG	BIT(11)
++#define QCA955X_RESET_HOST_DMA_INT	BIT(10)
++#define QCA955X_RESET_GE0_MAC		BIT(9)
++#define QCA955X_RESET_SGMII		BIT(8)
++#define QCA955X_RESET_PCIE_PHY		BIT(7)
++#define QCA955X_RESET_PCIE		BIT(6)
++#define QCA955X_RESET_USB_HOST		BIT(5)
++#define QCA955X_RESET_USB_PHY		BIT(4)
++#define QCA955X_RESET_USBSUS_OVERRIDE	BIT(3)
++#define QCA955X_RESET_LUT		BIT(2)
++#define QCA955X_RESET_MBOX		BIT(1)
++#define QCA955X_RESET_I2S		BIT(0)
+ 
++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN	BIT(18)
++#define AR933X_BOOTSTRAP_EEPBUSY	BIT(4)
+ #define AR933X_BOOTSTRAP_REF_CLK_40	BIT(0)
+ 
+ #define AR934X_BOOTSTRAP_SW_OPTION8	BIT(23)
+@@ -398,8 +652,17 @@
+ #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
+ #define AR934X_BOOTSTRAP_DDR1		BIT(0)
+ 
++#define QCA953X_BOOTSTRAP_SW_OPTION2	BIT(12)
++#define QCA953X_BOOTSTRAP_SW_OPTION1	BIT(11)
++#define QCA953X_BOOTSTRAP_EJTAG_MODE	BIT(5)
++#define QCA953X_BOOTSTRAP_REF_CLK_40	BIT(4)
++#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
++#define QCA953X_BOOTSTRAP_DDR1		BIT(0)
++
+ #define QCA955X_BOOTSTRAP_REF_CLK_40	BIT(4)
+ 
++#define QCA956X_BOOTSTRAP_REF_CLK_40	BIT(2)
++
+ #define AR934X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
+ #define AR934X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
+ #define AR934X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
+@@ -418,6 +681,24 @@
+ 	 AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
+ 	 AR934X_PCIE_WMAC_INT_PCIE_RC3)
+ 
++#define QCA953X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
++#define QCA953X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
++#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
++#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP		BIT(3)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC		BIT(4)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC0		BIT(5)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC1		BIT(6)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC2		BIT(7)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC3		BIT(8)
++#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \
++	(QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \
++	 QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP)
++
++#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \
++	(QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \
++	 QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \
++	 QCA953X_PCIE_WMAC_INT_PCIE_RC3)
++
+ #define QCA955X_EXT_INT_WMAC_MISC		BIT(0)
+ #define QCA955X_EXT_INT_WMAC_TX			BIT(1)
+ #define QCA955X_EXT_INT_WMAC_RXLP		BIT(2)
+@@ -449,6 +730,37 @@
+ 	 QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
+ 	 QCA955X_EXT_INT_PCIE_RC2_INT3)
+ 
++#define QCA956X_EXT_INT_WMAC_MISC		BIT(0)
++#define QCA956X_EXT_INT_WMAC_TX			BIT(1)
++#define QCA956X_EXT_INT_WMAC_RXLP		BIT(2)
++#define QCA956X_EXT_INT_WMAC_RXHP		BIT(3)
++#define QCA956X_EXT_INT_PCIE_RC1		BIT(4)
++#define QCA956X_EXT_INT_PCIE_RC1_INT0		BIT(5)
++#define QCA956X_EXT_INT_PCIE_RC1_INT1		BIT(6)
++#define QCA956X_EXT_INT_PCIE_RC1_INT2		BIT(7)
++#define QCA956X_EXT_INT_PCIE_RC1_INT3		BIT(8)
++#define QCA956X_EXT_INT_PCIE_RC2		BIT(12)
++#define QCA956X_EXT_INT_PCIE_RC2_INT0		BIT(13)
++#define QCA956X_EXT_INT_PCIE_RC2_INT1		BIT(14)
++#define QCA956X_EXT_INT_PCIE_RC2_INT2		BIT(15)
++#define QCA956X_EXT_INT_PCIE_RC2_INT3		BIT(16)
++#define QCA956X_EXT_INT_USB1			BIT(24)
++#define QCA956X_EXT_INT_USB2			BIT(28)
++
++#define QCA956X_EXT_INT_WMAC_ALL \
++	(QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \
++	 QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP)
++
++#define QCA956X_EXT_INT_PCIE_RC1_ALL \
++	(QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \
++	 QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \
++	 QCA956X_EXT_INT_PCIE_RC1_INT3)
++
++#define QCA956X_EXT_INT_PCIE_RC2_ALL \
++	(QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \
++	 QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \
++	 QCA956X_EXT_INT_PCIE_RC2_INT3)
++
+ #define REV_ID_MAJOR_MASK		0xfff0
+ #define REV_ID_MAJOR_AR71XX		0x00a0
+ #define REV_ID_MAJOR_AR913X		0x00b0
+@@ -460,8 +772,12 @@
+ #define REV_ID_MAJOR_AR9341		0x0120
+ #define REV_ID_MAJOR_AR9342		0x1120
+ #define REV_ID_MAJOR_AR9344		0x2120
++#define REV_ID_MAJOR_QCA9533		0x0140
++#define REV_ID_MAJOR_QCA9533_V2		0x0160
+ #define REV_ID_MAJOR_QCA9556		0x0130
+ #define REV_ID_MAJOR_QCA9558		0x1130
++#define REV_ID_MAJOR_TP9343		0x0150
++#define REV_ID_MAJOR_QCA9561		0x1150
+ 
+ #define AR71XX_REV_ID_MINOR_MASK	0x3
+ #define AR71XX_REV_ID_MINOR_AR7130	0x0
+@@ -482,8 +798,12 @@
+ 
+ #define AR934X_REV_ID_REVISION_MASK	0xf
+ 
++#define QCA953X_REV_ID_REVISION_MASK	0xf
++
+ #define QCA955X_REV_ID_REVISION_MASK	0xf
+ 
++#define QCA956X_REV_ID_REVISION_MASK	0xf
++
+ /*
+  * SPI block
+  */
+@@ -520,16 +840,65 @@
+ #define AR71XX_GPIO_REG_INT_PENDING	0x20
+ #define AR71XX_GPIO_REG_INT_ENABLE	0x24
+ #define AR71XX_GPIO_REG_FUNC		0x28
++#define AR71XX_GPIO_REG_FUNC_2		0x30
+ 
++#define AR934X_GPIO_REG_OUT_FUNC0	0x2c
++#define AR934X_GPIO_REG_OUT_FUNC1	0x30
++#define AR934X_GPIO_REG_OUT_FUNC2	0x34
++#define AR934X_GPIO_REG_OUT_FUNC3	0x38
++#define AR934X_GPIO_REG_OUT_FUNC4	0x3c
++#define AR934X_GPIO_REG_OUT_FUNC5	0x40
+ #define AR934X_GPIO_REG_FUNC		0x6c
+ 
++#define QCA953X_GPIO_REG_OUT_FUNC0	0x2c
++#define QCA953X_GPIO_REG_OUT_FUNC1	0x30
++#define QCA953X_GPIO_REG_OUT_FUNC2	0x34
++#define QCA953X_GPIO_REG_OUT_FUNC3	0x38
++#define QCA953X_GPIO_REG_OUT_FUNC4	0x3c
++#define QCA953X_GPIO_REG_IN_ENABLE0	0x44
++#define QCA953X_GPIO_REG_FUNC		0x6c
++
++#define QCA953X_GPIO_OUT_MUX_SPI_CS1		10
++#define QCA953X_GPIO_OUT_MUX_SPI_CS2		11
++#define QCA953X_GPIO_OUT_MUX_SPI_CS0		9
++#define QCA953X_GPIO_OUT_MUX_SPI_CLK		8
++#define QCA953X_GPIO_OUT_MUX_SPI_MOSI		12
++#define QCA953X_GPIO_OUT_MUX_LED_LINK1		41
++#define QCA953X_GPIO_OUT_MUX_LED_LINK2		42
++#define QCA953X_GPIO_OUT_MUX_LED_LINK3		43
++#define QCA953X_GPIO_OUT_MUX_LED_LINK4		44
++#define QCA953X_GPIO_OUT_MUX_LED_LINK5		45
++
++#define QCA955X_GPIO_REG_OUT_FUNC0	0x2c
++#define QCA955X_GPIO_REG_OUT_FUNC1	0x30
++#define QCA955X_GPIO_REG_OUT_FUNC2	0x34
++#define QCA955X_GPIO_REG_OUT_FUNC3	0x38
++#define QCA955X_GPIO_REG_OUT_FUNC4	0x3c
++#define QCA955X_GPIO_REG_OUT_FUNC5	0x40
++#define QCA955X_GPIO_REG_FUNC		0x6c
++
++#define QCA956X_GPIO_REG_OUT_FUNC0	0x2c
++#define QCA956X_GPIO_REG_OUT_FUNC1	0x30
++#define QCA956X_GPIO_REG_OUT_FUNC2	0x34
++#define QCA956X_GPIO_REG_OUT_FUNC3	0x38
++#define QCA956X_GPIO_REG_OUT_FUNC4	0x3c
++#define QCA956X_GPIO_REG_OUT_FUNC5	0x40
++#define QCA956X_GPIO_REG_IN_ENABLE0	0x44
++#define QCA956X_GPIO_REG_IN_ENABLE3	0x50
++#define QCA956X_GPIO_REG_FUNC		0x6c
++
++#define QCA956X_GPIO_OUT_MUX_GE0_MDO	32
++#define QCA956X_GPIO_OUT_MUX_GE0_MDC	33
++
+ #define AR71XX_GPIO_COUNT		16
+ #define AR7240_GPIO_COUNT		18
+ #define AR7241_GPIO_COUNT		20
+ #define AR913X_GPIO_COUNT		22
+ #define AR933X_GPIO_COUNT		30
+ #define AR934X_GPIO_COUNT		23
++#define QCA953X_GPIO_COUNT		18
+ #define QCA955X_GPIO_COUNT		24
++#define QCA956X_GPIO_COUNT		23
+ 
+ /*
+  * SRIF block
+@@ -552,4 +921,185 @@
+ #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT	13
+ #define AR934X_SRIF_DPLL2_OUTDIV_MASK	0x7
+ 
++#define QCA953X_SRIF_CPU_DPLL1_REG	0x1c0
++#define QCA953X_SRIF_CPU_DPLL2_REG	0x1c4
++#define QCA953X_SRIF_CPU_DPLL3_REG	0x1c8
++
++#define QCA953X_SRIF_DDR_DPLL1_REG	0x240
++#define QCA953X_SRIF_DDR_DPLL2_REG	0x244
++#define QCA953X_SRIF_DDR_DPLL3_REG	0x248
++
++#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT	27
++#define QCA953X_SRIF_DPLL1_REFDIV_MASK	0x1f
++#define QCA953X_SRIF_DPLL1_NINT_SHIFT	18
++#define QCA953X_SRIF_DPLL1_NINT_MASK	0x1ff
++#define QCA953X_SRIF_DPLL1_NFRAC_MASK	0x0003ffff
++
++#define QCA953X_SRIF_DPLL2_LOCAL_PLL	BIT(30)
++#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT	13
++#define QCA953X_SRIF_DPLL2_OUTDIV_MASK	0x7
++
++#define AR71XX_GPIO_FUNC_STEREO_EN		BIT(17)
++#define AR71XX_GPIO_FUNC_SLIC_EN		BIT(16)
++#define AR71XX_GPIO_FUNC_SPI_CS2_EN		BIT(13)
++#define AR71XX_GPIO_FUNC_SPI_CS1_EN		BIT(12)
++#define AR71XX_GPIO_FUNC_UART_EN		BIT(8)
++#define AR71XX_GPIO_FUNC_USB_OC_EN		BIT(4)
++#define AR71XX_GPIO_FUNC_USB_CLK_EN		BIT(0)
++
++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN		BIT(19)
++#define AR724X_GPIO_FUNC_SPI_EN			BIT(18)
++#define AR724X_GPIO_FUNC_SPI_CS_EN2		BIT(14)
++#define AR724X_GPIO_FUNC_SPI_CS_EN1		BIT(13)
++#define AR724X_GPIO_FUNC_CLK_OBS5_EN		BIT(12)
++#define AR724X_GPIO_FUNC_CLK_OBS4_EN		BIT(11)
++#define AR724X_GPIO_FUNC_CLK_OBS3_EN		BIT(10)
++#define AR724X_GPIO_FUNC_CLK_OBS2_EN		BIT(9)
++#define AR724X_GPIO_FUNC_CLK_OBS1_EN		BIT(8)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN	BIT(7)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN	BIT(6)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN	BIT(5)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN	BIT(4)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN	BIT(3)
++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN	BIT(2)
++#define AR724X_GPIO_FUNC_UART_EN		BIT(1)
++#define AR724X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
++
++#define AR933X_GPIO_FUNC2_JUMPSTART_DISABLE 	BIT(9)
++
++#define AR913X_GPIO_FUNC_WMAC_LED_EN		BIT(22)
++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN		BIT(21)
++#define AR913X_GPIO_FUNC_I2S_REFCLKEN		BIT(20)
++#define AR913X_GPIO_FUNC_I2S_MCKEN		BIT(19)
++#define AR913X_GPIO_FUNC_I2S1_EN		BIT(18)
++#define AR913X_GPIO_FUNC_I2S0_EN		BIT(17)
++#define AR913X_GPIO_FUNC_SLIC_EN		BIT(16)
++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN		BIT(9)
++#define AR913X_GPIO_FUNC_UART_EN		BIT(8)
++#define AR913X_GPIO_FUNC_USB_CLK_EN		BIT(4)
++
++#define AR933X_GPIO_FUNC_SPDIF2TCK		BIT(31)
++#define AR933X_GPIO_FUNC_SPDIF_EN		BIT(30)
++#define AR933X_GPIO_FUNC_I2SO_22_18_EN		BIT(29)
++#define AR933X_GPIO_FUNC_I2S_MCK_EN		BIT(27)
++#define AR933X_GPIO_FUNC_I2SO_EN		BIT(26)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL	BIT(25)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL	BIT(24)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT	BIT(23)
++#define AR933X_GPIO_FUNC_SPI_EN			BIT(18)
++#define AR933X_GPIO_FUNC_SPI_CS_EN2		BIT(14)
++#define AR933X_GPIO_FUNC_SPI_CS_EN1		BIT(13)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN	BIT(7)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN	BIT(6)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN	BIT(5)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN	BIT(4)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN	BIT(3)
++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN	BIT(2)
++#define AR933X_GPIO_FUNC_UART_EN		BIT(1)
++#define AR933X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
++
++#define AR934X_GPIO_FUNC_CLK_OBS7_EN		BIT(9)
++#define AR934X_GPIO_FUNC_CLK_OBS6_EN		BIT(8)
++#define AR934X_GPIO_FUNC_CLK_OBS5_EN		BIT(7)
++#define AR934X_GPIO_FUNC_CLK_OBS4_EN		BIT(6)
++#define AR934X_GPIO_FUNC_CLK_OBS3_EN		BIT(5)
++#define AR934X_GPIO_FUNC_CLK_OBS2_EN		BIT(4)
++#define AR934X_GPIO_FUNC_CLK_OBS1_EN		BIT(3)
++#define AR934X_GPIO_FUNC_CLK_OBS0_EN		BIT(2)
++#define AR934X_GPIO_FUNC_JTAG_DISABLE		BIT(1)
++
++#define AR934X_GPIO_OUT_GPIO		0
++#define AR934X_GPIO_OUT_SPI_CS1	7
++#define AR934X_GPIO_OUT_LED_LINK0	41
++#define AR934X_GPIO_OUT_LED_LINK1	42
++#define AR934X_GPIO_OUT_LED_LINK2	43
++#define AR934X_GPIO_OUT_LED_LINK3	44
++#define AR934X_GPIO_OUT_LED_LINK4	45
++#define AR934X_GPIO_OUT_EXT_LNA0	46
++#define AR934X_GPIO_OUT_EXT_LNA1	47
++
++#define QCA955X_GPIO_OUT_GPIO		0
++
++/*
++ * MII_CTRL block
++ */
++#define AR71XX_MII_REG_MII0_CTRL	0x00
++#define AR71XX_MII_REG_MII1_CTRL	0x04
++
++#define AR71XX_MII_CTRL_IF_MASK		3
++#define AR71XX_MII_CTRL_SPEED_SHIFT	4
++#define AR71XX_MII_CTRL_SPEED_MASK	3
++#define AR71XX_MII_CTRL_SPEED_10	0
++#define AR71XX_MII_CTRL_SPEED_100	1
++#define AR71XX_MII_CTRL_SPEED_1000	2
++
++#define AR71XX_MII0_CTRL_IF_GMII	0
++#define AR71XX_MII0_CTRL_IF_MII		1
++#define AR71XX_MII0_CTRL_IF_RGMII	2
++#define AR71XX_MII0_CTRL_IF_RMII	3
++
++#define AR71XX_MII1_CTRL_IF_RGMII	0
++#define AR71XX_MII1_CTRL_IF_RMII	1
++
++/*
++ * AR933X GMAC interface
++ */
++#define AR933X_GMAC_REG_ETH_CFG		0x00
++
++#define AR933X_ETH_CFG_RGMII_GE0	BIT(0)
++#define AR933X_ETH_CFG_MII_GE0		BIT(1)
++#define AR933X_ETH_CFG_GMII_GE0		BIT(2)
++#define AR933X_ETH_CFG_MII_GE0_MASTER	BIT(3)
++#define AR933X_ETH_CFG_MII_GE0_SLAVE	BIT(4)
++#define AR933X_ETH_CFG_MII_GE0_ERR_EN	BIT(5)
++#define AR933X_ETH_CFG_SW_PHY_SWAP	BIT(7)
++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP	BIT(8)
++#define AR933X_ETH_CFG_RMII_GE0		BIT(9)
++#define AR933X_ETH_CFG_RMII_GE0_SPD_10	0
++#define AR933X_ETH_CFG_RMII_GE0_SPD_100	BIT(10)
++
++/*
++ * AR934X GMAC Interface
++ */
++#define AR934X_GMAC_REG_ETH_CFG		0x00
++
++#define AR934X_ETH_CFG_RGMII_GMAC0	BIT(0)
++#define AR934X_ETH_CFG_MII_GMAC0	BIT(1)
++#define AR934X_ETH_CFG_GMII_GMAC0	BIT(2)
++#define AR934X_ETH_CFG_MII_GMAC0_MASTER	BIT(3)
++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE	BIT(4)
++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN	BIT(5)
++#define AR934X_ETH_CFG_SW_ONLY_MODE	BIT(6)
++#define AR934X_ETH_CFG_SW_PHY_SWAP	BIT(7)
++#define AR934X_ETH_CFG_SW_APB_ACCESS	BIT(9)
++#define AR934X_ETH_CFG_RMII_GMAC0	BIT(10)
++#define AR933X_ETH_CFG_MII_CNTL_SPEED	BIT(11)
++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST	BIT(13)
++#define AR934X_ETH_CFG_RXD_DELAY        BIT(14)
++#define AR934X_ETH_CFG_RXD_DELAY_MASK   0x3
++#define AR934X_ETH_CFG_RXD_DELAY_SHIFT  14
++#define AR934X_ETH_CFG_RDV_DELAY        BIT(16)
++#define AR934X_ETH_CFG_RDV_DELAY_MASK   0x3
++#define AR934X_ETH_CFG_RDV_DELAY_SHIFT  16
++
++/*
++ * QCA953X GMAC Interface
++ */
++#define QCA953X_GMAC_REG_ETH_CFG		0x00
++
++#define QCA953X_ETH_CFG_SW_ONLY_MODE		BIT(6)
++#define QCA953X_ETH_CFG_SW_PHY_SWAP		BIT(7)
++#define QCA953X_ETH_CFG_SW_APB_ACCESS		BIT(9)
++#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST	BIT(13)
++
++/*
++ * QCA955X GMAC Interface
++ */
++
++#define QCA955X_GMAC_REG_ETH_CFG	0x00
++
++#define QCA955X_ETH_CFG_RGMII_EN	BIT(0)
++#define QCA955X_ETH_CFG_GE0_SGMII	BIT(6)
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/ath79.h linux-4.1.13/arch/mips/include/asm/mach-ath79/ath79.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/ath79.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mach-ath79/ath79.h	2015-12-04 19:57:04.482071652 +0100
+@@ -32,8 +32,11 @@
+ 	ATH79_SOC_AR9341,
+ 	ATH79_SOC_AR9342,
+ 	ATH79_SOC_AR9344,
++	ATH79_SOC_QCA9533,
+ 	ATH79_SOC_QCA9556,
+ 	ATH79_SOC_QCA9558,
++	ATH79_SOC_TP9343,
++	ATH79_SOC_QCA9561,
+ };
+ 
+ extern enum ath79_soc_type ath79_soc;
+@@ -100,6 +103,16 @@
+ 	return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
+ }
+ 
++static inline int soc_is_qca9533(void)
++{
++	return ath79_soc == ATH79_SOC_QCA9533;
++}
++
++static inline int soc_is_qca953x(void)
++{
++	return soc_is_qca9533();
++}
++
+ static inline int soc_is_qca9556(void)
+ {
+ 	return ath79_soc == ATH79_SOC_QCA9556;
+@@ -115,7 +128,23 @@
+ 	return soc_is_qca9556() || soc_is_qca9558();
+ }
+ 
++static inline int soc_is_tp9343(void)
++{
++	return ath79_soc == ATH79_SOC_TP9343;
++}
++ 
++static inline int soc_is_qca9561(void)
++{
++	return ath79_soc == ATH79_SOC_QCA9561;
++}
++
++static inline int soc_is_qca956x(void)
++{
++	return soc_is_tp9343() || soc_is_qca9561();
++}
++
+ extern void __iomem *ath79_ddr_base;
++extern void __iomem *ath79_gpio_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
+ 
+@@ -132,6 +161,7 @@
+ static inline void ath79_reset_wr(unsigned reg, u32 val)
+ {
+ 	__raw_writel(val, ath79_reset_base + reg);
++	(void) __raw_readl(ath79_reset_base + reg); /* flush */
+ }
+ 
+ static inline u32 ath79_reset_rr(unsigned reg)
+@@ -141,5 +171,9 @@
+ 
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
++u32 ath79_device_reset_get(u32 mask);
++
++void ath79_flash_acquire(void);
++void ath79_flash_release(void);
+ 
+ #endif /* __ASM_MACH_ATH79_H */
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h linux-4.1.13/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h	2015-12-04 19:57:03.962105671 +0100
+@@ -16,8 +16,15 @@
+ 	unsigned	num_chipselect;
+ };
+ 
++enum ath79_spi_cs_type {
++	ATH79_SPI_CS_TYPE_INTERNAL,
++	ATH79_SPI_CS_TYPE_GPIO,
++};
++
+ struct ath79_spi_controller_data {
+-	unsigned	gpio;
++	enum ath79_spi_cs_type cs_type;
++	unsigned cs_line;
++	bool is_flash;
+ };
+ 
+ #endif /* _ATH79_SPI_PLATFORM_H */
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h linux-4.1.13/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h	2015-12-04 19:57:03.826114569 +0100
+@@ -36,6 +36,7 @@
+ #define cpu_has_mdmx		0
+ #define cpu_has_mips3d		0
+ #define cpu_has_smartmips	0
++#define cpu_has_rixi		0
+ 
+ #define cpu_has_mips32r1	1
+ #define cpu_has_mips32r2	1
+@@ -43,6 +44,7 @@
+ #define cpu_has_mips64r2	0
+ 
+ #define cpu_has_mipsmt		0
++#define cpu_has_userlocal	0
+ 
+ #define cpu_has_64bits		0
+ #define cpu_has_64bit_zero_reg	0
+@@ -51,5 +53,9 @@
+ 
+ #define cpu_dcache_line_size()	32
+ #define cpu_icache_line_size()	32
++#define cpu_has_vtag_icache	0
++#define cpu_has_dc_aliases	1
++#define cpu_has_ic_fills_f_dc	0
++#define cpu_has_pindexed_dcache	0
+ 
+ #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/irq.h linux-4.1.13/arch/mips/include/asm/mach-ath79/irq.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/irq.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mach-ath79/irq.h	2015-12-04 19:57:05.370013557 +0100
+@@ -10,7 +10,7 @@
+ #define __ASM_MACH_ATH79_IRQ_H
+ 
+ #define MIPS_CPU_IRQ_BASE	0
+-#define NR_IRQS			51
++#define NR_IRQS			83
+ 
+ #define ATH79_CPU_IRQ(_x)	(MIPS_CPU_IRQ_BASE + (_x))
+ 
+@@ -30,6 +30,10 @@
+ #define ATH79_IP3_IRQ_COUNT     3
+ #define ATH79_IP3_IRQ(_x)       (ATH79_IP3_IRQ_BASE + (_x))
+ 
++#define ATH79_GPIO_IRQ_BASE	(ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT)
++#define ATH79_GPIO_IRQ_COUNT	32
++#define ATH79_GPIO_IRQ(_x)	(ATH79_GPIO_IRQ_BASE + (_x))
++
+ #include_next <irq.h>
+ 
+ #endif /* __ASM_MACH_ATH79_IRQ_H */
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/mach-rb750.h linux-4.1.13/arch/mips/include/asm/mach-ath79/mach-rb750.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/mach-rb750.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mach-ath79/mach-rb750.h	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,84 @@
++/*
++ *  MikroTik RouterBOARD 750 definitions
++ *
++ *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++#ifndef _MACH_RB750_H
++#define _MACH_RB750_H
++
++#include <linux/bitops.h>
++
++#define RB750_GPIO_LVC573_LE	0	/* Latch enable on LVC573 */
++#define RB750_GPIO_NAND_IO0	1	/* NAND I/O 0 */
++#define RB750_GPIO_NAND_IO1	2	/* NAND I/O 1 */
++#define RB750_GPIO_NAND_IO2	3	/* NAND I/O 2 */
++#define RB750_GPIO_NAND_IO3	4	/* NAND I/O 3 */
++#define RB750_GPIO_NAND_IO4	5	/* NAND I/O 4 */
++#define RB750_GPIO_NAND_IO5	6	/* NAND I/O 5 */
++#define RB750_GPIO_NAND_IO6	7	/* NAND I/O 6 */
++#define RB750_GPIO_NAND_IO7	8	/* NAND I/O 7 */
++#define RB750_GPIO_NAND_NCE	11	/* NAND Chip Enable (active low) */
++#define RB750_GPIO_NAND_RDY	12	/* NAND Ready */
++#define RB750_GPIO_NAND_CLE	14	/* NAND Command Latch Enable */
++#define RB750_GPIO_NAND_ALE	15	/* NAND Address Latch Enable */
++#define RB750_GPIO_NAND_NRE	16	/* NAND Read Enable (active low) */
++#define RB750_GPIO_NAND_NWE	17	/* NAND Write Enable (active low) */
++
++#define RB750_GPIO_BTN_RESET	1
++#define RB750_GPIO_SPI_CS0	2
++#define RB750_GPIO_LED_ACT	12
++#define RB750_GPIO_LED_PORT1	13
++#define RB750_GPIO_LED_PORT2	14
++#define RB750_GPIO_LED_PORT3	15
++#define RB750_GPIO_LED_PORT4	16
++#define RB750_GPIO_LED_PORT5	17
++
++#define RB750_LED_ACT		BIT(RB750_GPIO_LED_ACT)
++#define RB750_LED_PORT1		BIT(RB750_GPIO_LED_PORT1)
++#define RB750_LED_PORT2		BIT(RB750_GPIO_LED_PORT2)
++#define RB750_LED_PORT3		BIT(RB750_GPIO_LED_PORT3)
++#define RB750_LED_PORT4		BIT(RB750_GPIO_LED_PORT4)
++#define RB750_LED_PORT5		BIT(RB750_GPIO_LED_PORT5)
++#define RB750_NAND_NCE		BIT(RB750_GPIO_NAND_NCE)
++
++#define RB750_LVC573_LE		BIT(RB750_GPIO_LVC573_LE)
++
++#define RB750_LED_BITS	(RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
++			 RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
++
++#define RB7XX_GPIO_NAND_NCE	0
++#define RB7XX_GPIO_MON		9
++#define RB7XX_GPIO_LED_ACT	11
++#define RB7XX_GPIO_USB_POWERON	13
++
++#define RB7XX_NAND_NCE		BIT(RB7XX_GPIO_NAND_NCE)
++#define RB7XX_LED_ACT		BIT(RB7XX_GPIO_LED_ACT)
++#define RB7XX_MONITOR		BIT(RB7XX_GPIO_MON)
++#define RB7XX_USB_POWERON	BIT(RB7XX_GPIO_USB_POWERON)
++
++struct rb750_led_data {
++	char	*name;
++	char	*default_trigger;
++	u32	mask;
++	int	active_low;
++};
++
++struct rb750_led_platform_data {
++	int			num_leds;
++	struct rb750_led_data	*leds;
++	void			(*latch_change)(u32 clear, u32 set);
++};
++
++struct rb7xx_nand_platform_data {
++	u32 nce_line;
++
++	void (*enable_pins)(void);
++	void (*disable_pins)(void);
++	void (*latch_change)(u32, u32);
++};
++
++#endif /* _MACH_RB750_H */
+\ No newline at end of file
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/mangle-port.h linux-4.1.13/arch/mips/include/asm/mach-ath79/mangle-port.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/mangle-port.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mach-ath79/mangle-port.h	2015-12-04 19:57:03.970105148 +0100
+@@ -0,0 +1,37 @@
++/*
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
++ *      Copyright (C) 2003, 2004 Ralf Baechle
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
++#define __ASM_MACH_ATH79_MANGLE_PORT_H
++
++#ifdef CONFIG_PCI
++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
++#else
++#define ath79_pci_swizzle_b(port) (port)
++#define ath79_pci_swizzle_w(port) (port)
++#endif
++
++#define __swizzle_addr_b(port)	ath79_pci_swizzle_b(port)
++#define __swizzle_addr_w(port)	ath79_pci_swizzle_w(port)
++#define __swizzle_addr_l(port)	(port)
++#define __swizzle_addr_q(port)	(port)
++
++# define ioswabb(a, x)           (x)
++# define __mem_ioswabb(a, x)     (x)
++# define ioswabw(a, x)           (x)
++# define __mem_ioswabw(a, x)     cpu_to_le16(x)
++# define ioswabl(a, x)           (x)
++# define __mem_ioswabl(a, x)     cpu_to_le32(x)
++# define ioswabq(a, x)           (x)
++# define __mem_ioswabq(a, x)     cpu_to_le64(x)
++
++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h linux-4.1.13/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,48 @@
++/*
++ * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was based on the patches for Linux 2.6.27.39 published by
++ * MikroTik for their RouterBoard 4xx series devices.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#define CPLD_GPIO_nLED1		0
++#define CPLD_GPIO_nLED2		1
++#define CPLD_GPIO_nLED3		2
++#define CPLD_GPIO_nLED4		3
++#define CPLD_GPIO_FAN		4
++#define CPLD_GPIO_ALE		5
++#define CPLD_GPIO_CLE		6
++#define CPLD_GPIO_nCE		7
++#define CPLD_GPIO_nLED5		8
++
++#define CPLD_NUM_GPIOS		9
++
++#define CPLD_CFG_nLED1		BIT(CPLD_GPIO_nLED1)
++#define CPLD_CFG_nLED2		BIT(CPLD_GPIO_nLED2)
++#define CPLD_CFG_nLED3		BIT(CPLD_GPIO_nLED3)
++#define CPLD_CFG_nLED4		BIT(CPLD_GPIO_nLED4)
++#define CPLD_CFG_FAN		BIT(CPLD_GPIO_FAN)
++#define CPLD_CFG_ALE		BIT(CPLD_GPIO_ALE)
++#define CPLD_CFG_CLE		BIT(CPLD_GPIO_CLE)
++#define CPLD_CFG_nCE		BIT(CPLD_GPIO_nCE)
++#define CPLD_CFG_nLED5		BIT(CPLD_GPIO_nLED5)
++
++struct rb4xx_cpld_platform_data {
++	unsigned	gpio_base;
++};
++
++extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
++extern int rb4xx_cpld_read(unsigned char *rx_buf,
++			   const unsigned char *verify_buf,
++			   unsigned cnt);
++extern int rb4xx_cpld_read_from(unsigned addr,
++				unsigned char *rx_buf,
++				const unsigned char *verify_buf,
++				unsigned cnt);
++extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);
+diff -Nur linux-4.1.13.orig/arch/mips/include/asm/mips_machine.h linux-4.1.13/arch/mips/include/asm/mips_machine.h
+--- linux-4.1.13.orig/arch/mips/include/asm/mips_machine.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/include/asm/mips_machine.h	2015-12-04 19:57:03.826114569 +0100
+@@ -36,6 +36,18 @@
+ 	.mach_setup	= _setup,				\
+ };
+ 
++#define MIPS_MACHINE_NONAME(_type, _id, _setup)		\
++static const char machine_id_##_type[] __initconst		\
++			__aligned(1) = _id;			\
++static struct mips_machine machine_##_type			\
++		__used __section(.mips.machines.init) =		\
++{								\
++	.mach_type	= _type,				\
++	.mach_id	= machine_id_##_type,			\
++	.mach_name	= NULL,					\
++	.mach_setup	= _setup,				\
++};
++
+ extern long __mips_machines_start;
+ extern long __mips_machines_end;
+ 
+diff -Nur linux-4.1.13.orig/arch/mips/Kconfig linux-4.1.13/arch/mips/Kconfig
+--- linux-4.1.13.orig/arch/mips/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/Kconfig	2015-12-04 19:57:03.986104101 +0100
+@@ -1070,6 +1070,9 @@
+ config MIPS_NILE4
+ 	bool
+ 
++config MYLOADER
++	bool
++
+ config SYNC_R4K
+ 	bool
+ 
+diff -Nur linux-4.1.13.orig/arch/mips/Makefile linux-4.1.13/arch/mips/Makefile
+--- linux-4.1.13.orig/arch/mips/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/arch/mips/Makefile	2015-12-04 19:57:03.982104363 +0100
+@@ -216,6 +216,7 @@
+ #
+ libs-$(CONFIG_FW_ARC)		+= arch/mips/fw/arc/
+ libs-$(CONFIG_FW_CFE)		+= arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/
+ libs-$(CONFIG_FW_SNIPROM)	+= arch/mips/fw/sni/
+ libs-y				+= arch/mips/fw/lib/
+ 
+diff -Nur linux-4.1.13.orig/drivers/gpio/gpio-74x164.c linux-4.1.13/drivers/gpio/gpio-74x164.c
+--- linux-4.1.13.orig/drivers/gpio/gpio-74x164.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/gpio/gpio-74x164.c	2015-12-04 19:57:03.930107765 +0100
+@@ -12,6 +12,7 @@
+ #include <linux/init.h>
+ #include <linux/mutex.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/74x164.h>
+ #include <linux/gpio.h>
+ #include <linux/of_gpio.h>
+ #include <linux/slab.h>
+@@ -107,8 +108,18 @@
+ static int gen_74x164_probe(struct spi_device *spi)
+ {
+ 	struct gen_74x164_chip *chip;
++	struct gen_74x164_chip_platform_data *pdata;
++	struct device_node *np;
+ 	int ret;
+ 
++	pdata = spi->dev.platform_data;
++	np = spi->dev.of_node;
++
++	if (!np && !pdata) {
++		dev_err(&spi->dev, "No configuration data available.\n");
++		return -EINVAL;
++	}
++
+ 	/*
+ 	 * bits_per_word cannot be configured in platform data
+ 	 */
+@@ -130,18 +141,28 @@
+ 	chip->gpio_chip.set = gen_74x164_set_value;
+ 	chip->gpio_chip.base = -1;
+ 
+-	if (of_property_read_u32(spi->dev.of_node, "registers-number",
+-				 &chip->registers)) {
+-		dev_err(&spi->dev,
+-			"Missing registers-number property in the DT.\n");
+-		return -EINVAL;
++	if (np) {
++		if (of_property_read_u32(spi->dev.of_node, "registers-number", &chip->registers)) {
++			dev_err(&spi->dev, "Missing registers-number property in the DT.\n");
++			ret = -EINVAL;
++			goto exit_destroy;
++		}
++	} else if (pdata) {
++		chip->gpio_chip.base = pdata->base;
++		chip->registers = pdata->num_registers;
+ 	}
+ 
++	if (!chip->registers)
++		chip->registers = 1;
++
+ 	chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
+ 	chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL);
+ 	if (!chip->buffer)
+ 		return -ENOMEM;
+ 
++	if (pdata && pdata->init_data)
++		memcpy(chip->buffer, pdata->init_data, chip->registers);
++
+ 	chip->gpio_chip.can_sleep = true;
+ 	chip->gpio_chip.dev = &spi->dev;
+ 	chip->gpio_chip.owner = THIS_MODULE;
+@@ -174,17 +195,19 @@
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_OF
+ static const struct of_device_id gen_74x164_dt_ids[] = {
+ 	{ .compatible = "fairchild,74hc595" },
+ 	{},
+ };
+ MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids);
++#endif /* CONFIG_OF */
+ 
+ static struct spi_driver gen_74x164_driver = {
+ 	.driver = {
+ 		.name		= "74x164",
+ 		.owner		= THIS_MODULE,
+-		.of_match_table	= gen_74x164_dt_ids,
++		.of_match_table	= of_match_ptr(gen_74x164_dt_ids),
+ 	},
+ 	.probe		= gen_74x164_probe,
+ 	.remove		= gen_74x164_remove,
+diff -Nur linux-4.1.13.orig/drivers/gpio/gpio-latch.c linux-4.1.13/drivers/gpio/gpio-latch.c
+--- linux-4.1.13.orig/drivers/gpio/gpio-latch.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/gpio/gpio-latch.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,220 @@
++/*
++ *  GPIO latch driver
++ *
++ *  Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++
++#include <linux/platform_data/gpio-latch.h>
++
++struct gpio_latch_chip {
++	struct gpio_chip gc;
++
++	struct mutex mutex;
++	struct mutex latch_mutex;
++	bool latch_enabled;
++	int le_gpio;
++	bool le_active_low;
++	int *gpios;
++};
++
++static inline struct gpio_latch_chip *to_gpio_latch_chip(struct gpio_chip *gc)
++{
++	return container_of(gc, struct gpio_latch_chip, gc);
++}
++
++static void gpio_latch_lock(struct gpio_latch_chip *glc, bool enable)
++{
++	mutex_lock(&glc->mutex);
++
++	if (enable)
++		glc->latch_enabled = true;
++
++	if (glc->latch_enabled)
++		mutex_lock(&glc->latch_mutex);
++}
++
++static void gpio_latch_unlock(struct gpio_latch_chip *glc, bool disable)
++{
++	if (glc->latch_enabled)
++		mutex_unlock(&glc->latch_mutex);
++
++	if (disable)
++		glc->latch_enabled = true;
++
++	mutex_unlock(&glc->mutex);
++}
++
++static int
++gpio_latch_get(struct gpio_chip *gc, unsigned offset)
++{
++	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++	int ret;
++
++	gpio_latch_lock(glc, false);
++	ret = gpio_get_value(glc->gpios[offset]);
++	gpio_latch_unlock(glc, false);
++
++	return ret;
++}
++
++static void
++gpio_latch_set(struct gpio_chip *gc, unsigned offset, int value)
++{
++	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++	bool enable_latch = false;
++	bool disable_latch = false;
++	int gpio;
++
++	gpio = glc->gpios[offset];
++
++	if (gpio == glc->le_gpio) {
++		enable_latch = value ^ glc->le_active_low;
++		disable_latch = !enable_latch;
++	}
++
++	gpio_latch_lock(glc, enable_latch);
++	gpio_set_value(gpio, value);
++	gpio_latch_unlock(glc, disable_latch);
++}
++
++static int
++gpio_latch_direction_input(struct gpio_chip *gc, unsigned offset)
++{
++	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++	int ret;
++
++	gpio_latch_lock(glc, false);
++	ret = gpio_direction_input(glc->gpios[offset]);
++	gpio_latch_unlock(glc, false);
++
++	return ret;
++}
++
++static int
++gpio_latch_direction_output(struct gpio_chip *gc, unsigned offset, int value)
++{
++	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
++	bool enable_latch = false;
++	bool disable_latch = false;
++	int gpio;
++	int ret;
++
++	gpio = glc->gpios[offset];
++
++	if (gpio == glc->le_gpio) {
++		enable_latch = value ^ glc->le_active_low;
++		disable_latch = !enable_latch;
++	}
++
++	gpio_latch_lock(glc, enable_latch);
++	ret = gpio_direction_output(gpio, value);
++	gpio_latch_unlock(glc, disable_latch);
++
++	return ret;
++}
++
++static int gpio_latch_probe(struct platform_device *pdev)
++{
++	struct gpio_latch_chip *glc;
++	struct gpio_latch_platform_data *pdata;
++	struct gpio_chip *gc;
++	int size;
++	int ret;
++	int i;
++
++	pdata = dev_get_platdata(&pdev->dev);
++	if (!pdata)
++		return -EINVAL;
++
++	if (pdata->le_gpio_index >= pdata->num_gpios ||
++	    !pdata->num_gpios ||
++	    !pdata->gpios)
++		return -EINVAL;
++
++	for (i = 0; i < pdata->num_gpios; i++) {
++		int gpio = pdata->gpios[i];
++
++		ret = devm_gpio_request(&pdev->dev, gpio,
++					GPIO_LATCH_DRIVER_NAME);
++		if (ret)
++			return ret;
++	}
++
++	glc = devm_kzalloc(&pdev->dev, sizeof(*glc), GFP_KERNEL);
++	if (!glc)
++		return -ENOMEM;
++
++	mutex_init(&glc->mutex);
++	mutex_init(&glc->latch_mutex);
++
++	size = pdata->num_gpios * sizeof(glc->gpios[0]);
++	glc->gpios = devm_kzalloc(&pdev->dev, size , GFP_KERNEL);
++	if (!glc->gpios)
++		return -ENOMEM;
++
++	memcpy(glc->gpios, pdata->gpios, size);
++
++	glc->le_gpio = glc->gpios[pdata->le_gpio_index];
++	glc->le_active_low = pdata->le_active_low;
++
++	gc = &glc->gc;
++
++	gc->label = GPIO_LATCH_DRIVER_NAME;
++	gc->base = pdata->base;
++	gc->can_sleep = true;
++	gc->ngpio = pdata->num_gpios;
++	gc->get = gpio_latch_get;
++	gc->set = gpio_latch_set;
++	gc->direction_input = gpio_latch_direction_input,
++	gc->direction_output = gpio_latch_direction_output;
++
++	platform_set_drvdata(pdev, glc);
++
++	ret = gpiochip_add(&glc->gc);
++	if (ret)
++		return ret;
++
++	return 0;
++}
++
++static int gpio_latch_remove(struct platform_device *pdev)
++{
++	struct gpio_latch_chip *glc = platform_get_drvdata(pdev);
++
++	gpiochip_remove(&glc->gc);
++	return 0;
++}
++
++
++static struct platform_driver gpio_latch_driver = {
++	.probe = gpio_latch_probe,
++	.remove = gpio_latch_remove,
++	.driver = {
++		.name = GPIO_LATCH_DRIVER_NAME,
++		.owner = THIS_MODULE,
++	},
++};
++
++static int __init gpio_latch_init(void)
++{
++	return platform_driver_register(&gpio_latch_driver);
++}
++
++postcore_initcall(gpio_latch_init);
++
++MODULE_DESCRIPTION("GPIO latch driver");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" GPIO_LATCH_DRIVER_NAME);
+diff -Nur linux-4.1.13.orig/drivers/gpio/gpio-nxp-74hc153.c linux-4.1.13/drivers/gpio/gpio-nxp-74hc153.c
+--- linux-4.1.13.orig/drivers/gpio/gpio-nxp-74hc153.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/gpio/gpio-nxp-74hc153.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,251 @@
++/*
++ *  NXP 74HC153 - Dual 4-input multiplexer GPIO driver
++ *
++ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ */
++
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++#include <linux/platform_device.h>
++#include <linux/nxp_74hc153.h>
++
++#define NXP_74HC153_NUM_GPIOS	8
++#define NXP_74HC153_S0_MASK	0x1
++#define NXP_74HC153_S1_MASK	0x2
++#define NXP_74HC153_BANK_MASK	0x4
++
++struct nxp_74hc153_chip {
++	struct device		*parent;
++	struct gpio_chip	gpio_chip;
++	struct mutex		lock;
++};
++
++static struct nxp_74hc153_chip *gpio_to_nxp(struct gpio_chip *gc)
++{
++	return container_of(gc, struct nxp_74hc153_chip, gpio_chip);
++}
++
++static int nxp_74hc153_direction_input(struct gpio_chip *gc, unsigned offset)
++{
++	return 0;
++}
++
++static int nxp_74hc153_direction_output(struct gpio_chip *gc,
++					unsigned offset, int val)
++{
++	return -EINVAL;
++}
++
++static int nxp_74hc153_get_value(struct gpio_chip *gc, unsigned offset)
++{
++	struct nxp_74hc153_chip *nxp;
++	struct nxp_74hc153_platform_data *pdata;
++	unsigned s0;
++	unsigned s1;
++	unsigned pin;
++	int ret;
++
++	nxp = gpio_to_nxp(gc);
++	pdata = nxp->parent->platform_data;
++
++	s0 = !!(offset & NXP_74HC153_S0_MASK);
++	s1 = !!(offset & NXP_74HC153_S1_MASK);
++	pin = (offset & NXP_74HC153_BANK_MASK) ? pdata->gpio_pin_2y
++					       : pdata->gpio_pin_1y;
++
++	mutex_lock(&nxp->lock);
++	gpio_set_value(pdata->gpio_pin_s0, s0);
++	gpio_set_value(pdata->gpio_pin_s1, s1);
++	ret = gpio_get_value(pin);
++	mutex_unlock(&nxp->lock);
++
++	return ret;
++}
++
++static void nxp_74hc153_set_value(struct gpio_chip *gc,
++				  unsigned offset, int val)
++{
++	/* not supported */
++}
++
++static int nxp_74hc153_probe(struct platform_device *pdev)
++{
++	struct nxp_74hc153_platform_data *pdata;
++	struct nxp_74hc153_chip *nxp;
++	struct gpio_chip *gc;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (pdata == NULL) {
++		dev_dbg(&pdev->dev, "no platform data specified\n");
++		return -EINVAL;
++	}
++
++	nxp = kzalloc(sizeof(struct nxp_74hc153_chip), GFP_KERNEL);
++	if (nxp == NULL) {
++		dev_err(&pdev->dev, "no memory for private data\n");
++		return -ENOMEM;
++	}
++
++	err = gpio_request(pdata->gpio_pin_s0, dev_name(&pdev->dev));
++	if (err) {
++		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
++			pdata->gpio_pin_s0, err);
++		goto err_free_nxp;
++	}
++
++	err = gpio_request(pdata->gpio_pin_s1, dev_name(&pdev->dev));
++	if (err) {
++		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
++			pdata->gpio_pin_s1, err);
++		goto err_free_s0;
++	}
++
++	err = gpio_request(pdata->gpio_pin_1y, dev_name(&pdev->dev));
++	if (err) {
++		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
++			pdata->gpio_pin_1y, err);
++		goto err_free_s1;
++	}
++
++	err = gpio_request(pdata->gpio_pin_2y, dev_name(&pdev->dev));
++	if (err) {
++		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
++			pdata->gpio_pin_2y, err);
++		goto err_free_1y;
++	}
++
++	err = gpio_direction_output(pdata->gpio_pin_s0, 0);
++	if (err) {
++		dev_err(&pdev->dev,
++			"unable to set direction of gpio %u, err=%d\n",
++			pdata->gpio_pin_s0, err);
++		goto err_free_2y;
++	}
++
++	err = gpio_direction_output(pdata->gpio_pin_s1, 0);
++	if (err) {
++		dev_err(&pdev->dev,
++			"unable to set direction of gpio %u, err=%d\n",
++			pdata->gpio_pin_s1, err);
++		goto err_free_2y;
++	}
++
++	err = gpio_direction_input(pdata->gpio_pin_1y);
++	if (err) {
++		dev_err(&pdev->dev,
++			"unable to set direction of gpio %u, err=%d\n",
++			pdata->gpio_pin_1y, err);
++		goto err_free_2y;
++	}
++
++	err = gpio_direction_input(pdata->gpio_pin_2y);
++	if (err) {
++		dev_err(&pdev->dev,
++			"unable to set direction of gpio %u, err=%d\n",
++			pdata->gpio_pin_2y, err);
++		goto err_free_2y;
++	}
++
++	nxp->parent = &pdev->dev;
++	mutex_init(&nxp->lock);
++
++	gc = &nxp->gpio_chip;
++
++	gc->direction_input  = nxp_74hc153_direction_input;
++	gc->direction_output = nxp_74hc153_direction_output;
++	gc->get = nxp_74hc153_get_value;
++	gc->set = nxp_74hc153_set_value;
++	gc->can_sleep = 1;
++
++	gc->base = pdata->gpio_base;
++	gc->ngpio = NXP_74HC153_NUM_GPIOS;
++	gc->label = dev_name(nxp->parent);
++	gc->dev = nxp->parent;
++	gc->owner = THIS_MODULE;
++
++	err = gpiochip_add(&nxp->gpio_chip);
++	if (err) {
++		dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err);
++		goto err_free_2y;
++	}
++
++	platform_set_drvdata(pdev, nxp);
++	return 0;
++
++err_free_2y:
++	gpio_free(pdata->gpio_pin_2y);
++err_free_1y:
++	gpio_free(pdata->gpio_pin_1y);
++err_free_s1:
++	gpio_free(pdata->gpio_pin_s1);
++err_free_s0:
++	gpio_free(pdata->gpio_pin_s0);
++err_free_nxp:
++	kfree(nxp);
++	return err;
++}
++
++static int nxp_74hc153_remove(struct platform_device *pdev)
++{
++	struct nxp_74hc153_chip *nxp = platform_get_drvdata(pdev);
++	struct nxp_74hc153_platform_data *pdata = pdev->dev.platform_data;
++
++	if (nxp) {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)
++		int err;
++
++		err = gpiochip_remove(&nxp->gpio_chip);
++		if (err) {
++			dev_err(&pdev->dev,
++				"unable to remove gpio chip, err=%d\n",
++				err);
++			return err;
++		}
++#else
++		gpiochip_remove(&nxp->gpio_chip);
++#endif
++		gpio_free(pdata->gpio_pin_2y);
++		gpio_free(pdata->gpio_pin_1y);
++		gpio_free(pdata->gpio_pin_s1);
++		gpio_free(pdata->gpio_pin_s0);
++
++		kfree(nxp);
++		platform_set_drvdata(pdev, NULL);
++	}
++
++	return 0;
++}
++
++static struct platform_driver nxp_74hc153_driver = {
++	.probe		= nxp_74hc153_probe,
++	.remove		= nxp_74hc153_remove,
++	.driver = {
++		.name	= NXP_74HC153_DRIVER_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init nxp_74hc153_init(void)
++{
++	return platform_driver_register(&nxp_74hc153_driver);
++}
++subsys_initcall(nxp_74hc153_init);
++
++static void __exit nxp_74hc153_exit(void)
++{
++	platform_driver_unregister(&nxp_74hc153_driver);
++}
++module_exit(nxp_74hc153_exit);
++
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC153");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" NXP_74HC153_DRIVER_NAME);
+diff -Nur linux-4.1.13.orig/drivers/gpio/Kconfig linux-4.1.13/drivers/gpio/Kconfig
+--- linux-4.1.13.orig/drivers/gpio/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/gpio/Kconfig	2015-12-04 19:57:03.934107503 +0100
+@@ -941,7 +941,7 @@
+ 
+ config GPIO_74X164
+ 	tristate "74x164 serial-in/parallel-out 8-bits shift register"
+-	depends on SPI_MASTER && OF
++	depends on SPI_MASTER
+ 	help
+ 	  Driver for 74x164 compatible serial-in/parallel-out 8-outputs
+ 	  shift registers. This driver can be used to provide access
+@@ -988,4 +988,17 @@
+ 
+ endmenu
+ 
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++	tristate "NXP 74HC153 Dual 4-input multiplexer"
++	help
++	  Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++	  provides a GPIO interface supporting input mode only.
++
++config GPIO_LATCH
++	tristate "GPIO latch driver"
++	help
++	  Say yes here to enable a GPIO latch driver.
++
+ endif
+diff -Nur linux-4.1.13.orig/drivers/gpio/Makefile linux-4.1.13/drivers/gpio/Makefile
+--- linux-4.1.13.orig/drivers/gpio/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/gpio/Makefile	2015-12-04 19:57:03.934107503 +0100
+@@ -42,6 +42,7 @@
+ obj-$(CONFIG_GPIO_KEMPLD)	+= gpio-kempld.o
+ obj-$(CONFIG_ARCH_KS8695)	+= gpio-ks8695.o
+ obj-$(CONFIG_GPIO_INTEL_MID)	+= gpio-intel-mid.o
++obj-$(CONFIG_GPIO_LATCH)	+= gpio-latch.o
+ obj-$(CONFIG_GPIO_LOONGSON)	+= gpio-loongson.o
+ obj-$(CONFIG_GPIO_LP3943)	+= gpio-lp3943.o
+ obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
+@@ -64,6 +65,7 @@
+ obj-$(CONFIG_GPIO_MVEBU)        += gpio-mvebu.o
+ obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
+ obj-$(CONFIG_GPIO_MXS)		+= gpio-mxs.o
++obj-$(CONFIG_GPIO_NXP_74HC153)	+= gpio-nxp-74hc153.o
+ obj-$(CONFIG_GPIO_OCTEON)	+= gpio-octeon.o
+ obj-$(CONFIG_GPIO_OMAP)		+= gpio-omap.o
+ obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
+diff -Nur linux-4.1.13.orig/drivers/leds/Kconfig linux-4.1.13/drivers/leds/Kconfig
+--- linux-4.1.13.orig/drivers/leds/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/leds/Kconfig	2015-12-04 19:57:03.926108026 +0100
+@@ -534,6 +534,17 @@
+ 	  This option enables support for the 'White' LED block
+ 	  on Qualcomm PM8941 PMICs.
+ 
++config LEDS_WNDR3700_USB
++	tristate "NETGEAR WNDR3700 USB LED driver"
++	depends on LEDS_CLASS && ATH79_MACH_WNDR3700
++	help
++	  This option enables support for the USB LED found on the
++	  NETGEAR WNDR3700 board.
++
++config LEDS_RB750
++	tristate "LED driver for the Mikrotik RouterBOARD 750"
++	depends on LEDS_CLASS && ATH79_MACH_RB750
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+ 
+diff -Nur linux-4.1.13.orig/drivers/leds/leds-rb750.c linux-4.1.13/drivers/leds/leds-rb750.c
+--- linux-4.1.13.orig/drivers/leds/leds-rb750.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/leds/leds-rb750.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,144 @@
++/*
++ * LED driver for the RouterBOARD 750
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/slab.h>
++
++#include <asm/mach-ath79/mach-rb750.h>
++
++#define DRV_NAME	"leds-rb750"
++
++struct rb750_led_dev {
++	struct led_classdev	cdev;
++	u32			mask;
++	int			active_low;
++	void			(*latch_change)(u32 clear, u32 set);
++};
++
++struct rb750_led_drvdata {
++	struct rb750_led_dev	*led_devs;
++	int			num_leds;
++};
++
++static inline struct rb750_led_dev *to_rbled(struct led_classdev *led_cdev)
++{
++	return (struct rb750_led_dev *)container_of(led_cdev,
++		struct rb750_led_dev, cdev);
++}
++
++static void rb750_led_brightness_set(struct led_classdev *led_cdev,
++				     enum led_brightness value)
++{
++	struct rb750_led_dev *rbled = to_rbled(led_cdev);
++	int level;
++
++	level = (value == LED_OFF) ? 0 : 1;
++	level ^= rbled->active_low;
++
++	if (level)
++		rbled->latch_change(0, rbled->mask);
++	else
++		rbled->latch_change(rbled->mask, 0);
++}
++
++static int rb750_led_probe(struct platform_device *pdev)
++{
++	struct rb750_led_platform_data *pdata;
++	struct rb750_led_drvdata *drvdata;
++	int ret = 0;
++	int i;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -EINVAL;
++
++	drvdata = kzalloc(sizeof(struct rb750_led_drvdata) +
++			  sizeof(struct rb750_led_dev) * pdata->num_leds,
++			  GFP_KERNEL);
++	if (!drvdata)
++		return -ENOMEM;
++
++	drvdata->num_leds = pdata->num_leds;
++	drvdata->led_devs = (struct rb750_led_dev *) &drvdata[1];
++
++	for (i = 0; i < drvdata->num_leds; i++) {
++		struct rb750_led_dev *rbled = &drvdata->led_devs[i];
++		struct rb750_led_data *led_data = &pdata->leds[i];
++
++		rbled->cdev.name = led_data->name;
++		rbled->cdev.default_trigger = led_data->default_trigger;
++		rbled->cdev.brightness_set = rb750_led_brightness_set;
++		rbled->cdev.brightness = LED_OFF;
++
++		rbled->mask = led_data->mask;
++		rbled->active_low = !!led_data->active_low;
++		rbled->latch_change = pdata->latch_change;
++
++		ret = led_classdev_register(&pdev->dev, &rbled->cdev);
++		if (ret)
++			goto err;
++	}
++
++	platform_set_drvdata(pdev, drvdata);
++	return 0;
++
++err:
++	for (i = i - 1; i >= 0; i--)
++		led_classdev_unregister(&drvdata->led_devs[i].cdev);
++
++	kfree(drvdata);
++	return ret;
++}
++
++static int rb750_led_remove(struct platform_device *pdev)
++{
++	struct rb750_led_drvdata *drvdata;
++	int i;
++
++	drvdata = platform_get_drvdata(pdev);
++	for (i = 0; i < drvdata->num_leds; i++)
++		led_classdev_unregister(&drvdata->led_devs[i].cdev);
++
++	kfree(drvdata);
++	return 0;
++}
++
++static struct platform_driver rb750_led_driver = {
++	.probe		= rb750_led_probe,
++	.remove		= rb750_led_remove,
++	.driver		= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++MODULE_ALIAS("platform:leds-rb750");
++
++static int __init rb750_led_init(void)
++{
++	return platform_driver_register(&rb750_led_driver);
++}
++
++static void __exit rb750_led_exit(void)
++{
++	platform_driver_unregister(&rb750_led_driver);
++}
++
++module_init(rb750_led_init);
++module_exit(rb750_led_exit);
++
++MODULE_DESCRIPTION(DRV_NAME);
++MODULE_DESCRIPTION("LED driver for the RouterBOARD 750");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-4.1.13.orig/drivers/leds/leds-wndr3700-usb.c linux-4.1.13/drivers/leds/leds-wndr3700-usb.c
+--- linux-4.1.13.orig/drivers/leds/leds-wndr3700-usb.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/leds/leds-wndr3700-usb.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,76 @@
++/*
++ *  USB LED driver for the NETGEAR WNDR3700
++ *
++ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/leds.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#define DRIVER_NAME	"wndr3700-led-usb"
++
++static void wndr3700_usb_led_set(struct led_classdev *cdev,
++				 enum led_brightness brightness)
++{
++	if (brightness)
++		ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++	else
++		ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++}
++
++static enum led_brightness wndr3700_usb_led_get(struct led_classdev *cdev)
++{
++	return ath79_device_reset_get(AR71XX_RESET_GE1_PHY) ? LED_OFF : LED_FULL;
++}
++
++static struct led_classdev wndr3700_usb_led = {
++	.name = "netgear:green:usb",
++	.brightness_set = wndr3700_usb_led_set,
++	.brightness_get = wndr3700_usb_led_get,
++};
++
++static int wndr3700_usb_led_probe(struct platform_device *pdev)
++{
++	return led_classdev_register(&pdev->dev, &wndr3700_usb_led);
++}
++
++static int wndr3700_usb_led_remove(struct platform_device *pdev)
++{
++	led_classdev_unregister(&wndr3700_usb_led);
++	return 0;
++}
++
++static struct platform_driver wndr3700_usb_led_driver = {
++	.probe = wndr3700_usb_led_probe,
++	.remove = wndr3700_usb_led_remove,
++	.driver = {
++		.name = DRIVER_NAME,
++		.owner = THIS_MODULE,
++	},
++};
++
++static int __init wndr3700_usb_led_init(void)
++{
++	return platform_driver_register(&wndr3700_usb_led_driver);
++}
++
++static void __exit wndr3700_usb_led_exit(void)
++{
++	platform_driver_unregister(&wndr3700_usb_led_driver);
++}
++
++module_init(wndr3700_usb_led_init);
++module_exit(wndr3700_usb_led_exit);
++
++MODULE_DESCRIPTION("USB LED driver for the NETGEAR WNDR3700");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" DRIVER_NAME);
+diff -Nur linux-4.1.13.orig/drivers/leds/Makefile linux-4.1.13/drivers/leds/Makefile
+--- linux-4.1.13.orig/drivers/leds/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/leds/Makefile	2015-12-04 19:57:03.926108026 +0100
+@@ -43,12 +43,14 @@
+ obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB}		+= leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR)		+= leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200)		+= leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593)		+= leds-lt3593.o
+ obj-$(CONFIG_LEDS_ADP5520)		+= leds-adp5520.o
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS)	+= dell-led.o
+ obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
++obj-$(CONFIG_LEDS_RB750)		+= leds-rb750.o
+ obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
+ obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
+diff -Nur linux-4.1.13.orig/drivers/Makefile linux-4.1.13/drivers/Makefile
+--- linux-4.1.13.orig/drivers/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/Makefile	2015-12-04 19:57:03.890110382 +0100
+@@ -71,8 +71,8 @@
+ obj-$(CONFIG_SCSI)		+= scsi/
+ obj-$(CONFIG_ATA)		+= ata/
+ obj-$(CONFIG_TARGET_CORE)	+= target/
+-obj-$(CONFIG_MTD)		+= mtd/
+ obj-$(CONFIG_SPI)		+= spi/
++obj-$(CONFIG_MTD)		+= mtd/
+ obj-$(CONFIG_SPMI)		+= spmi/
+ obj-y				+= hsi/
+ obj-y				+= net/
+diff -Nur linux-4.1.13.orig/drivers/mtd/chips/cfi_cmdset_0002.c linux-4.1.13/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-4.1.13.orig/drivers/mtd/chips/cfi_cmdset_0002.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/mtd/chips/cfi_cmdset_0002.c	2015-12-04 19:57:03.878111167 +0100
+@@ -40,7 +40,7 @@
+ #include <linux/mtd/xip.h>
+ 
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ 
+ #define MAX_WORD_RETRIES 3
+ 
+@@ -51,7 +51,9 @@
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -202,6 +204,7 @@
+ }
+ #endif
+ 
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ 	struct map_info *map = mtd->priv;
+@@ -211,6 +214,7 @@
+ 		mtd->_write = cfi_amdstd_write_buffers;
+ 	}
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1632,8 +1636,8 @@
+ 			break;
+ 		}
+ 
+-		if (chip_ready(map, adr))
+-			break;
++		if (chip_good(map, adr, datum))
++			goto enable_xip;
+ 
+ 		/* Latency issues. Drop the lock, wait a while and retry */
+ 		UDELAY(map, chip, adr, 1);
+@@ -1649,6 +1653,8 @@
+ 
+ 		ret = -EIO;
+ 	}
++
++ enable_xip:
+ 	xip_enable(map, chip, adr);
+  op_done:
+ 	if (mode == FL_OTP_WRITE)
+@@ -1789,6 +1795,7 @@
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ 				    unsigned long adr, const u_char *buf,
+ 				    int len)
+@@ -1916,7 +1923,6 @@
+ 	return ret;
+ }
+ 
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ 				    size_t *retlen, const u_char *buf)
+ {
+@@ -1991,6 +1997,7 @@
+ 
+ 	return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ 
+ /*
+  * Wait for the flash chip to become ready to write data
+@@ -2226,7 +2233,6 @@
+ 	return 0;
+ }
+ 
+-
+ /*
+  * Handle devices with one erase region, that only implement
+  * the chip erase command.
+@@ -2290,8 +2296,8 @@
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr))
+-			break;
++		if (chip_good(map, adr, map_word_ff(map)))
++			goto op_done;
+ 
+ 		if (time_after(jiffies, timeo)) {
+ 			printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -2311,6 +2317,7 @@
+ 		ret = -EIO;
+ 	}
+ 
++ op_done:
+ 	chip->state = FL_READY;
+ 	xip_enable(map, chip, adr);
+ 	DISABLE_VPP(map);
+@@ -2379,9 +2386,9 @@
+ 			chip->erase_suspended = 0;
+ 		}
+ 
+-		if (chip_ready(map, adr)) {
++		if (chip_good(map, adr, map_word_ff(map))) {
+ 			xip_enable(map, chip, adr);
+-			break;
++			goto op_done;
+ 		}
+ 
+ 		if (time_after(jiffies, timeo)) {
+@@ -2403,6 +2410,7 @@
+ 		ret = -EIO;
+ 	}
+ 
++ op_done:
+ 	chip->state = FL_READY;
+ 	DISABLE_VPP(map);
+ 	put_chip(map, chip, adr);
+diff -Nur linux-4.1.13.orig/drivers/mtd/chips/jedec_probe.c linux-4.1.13/drivers/mtd/chips/jedec_probe.c
+--- linux-4.1.13.orig/drivers/mtd/chips/jedec_probe.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/mtd/chips/jedec_probe.c	2015-12-04 19:57:03.834114045 +0100
+@@ -148,6 +148,7 @@
+ #define SST39LF160	0x2782
+ #define SST39VF1601	0x234b
+ #define SST39VF3201	0x235b
++#define SST39VF6401B	0x236d
+ #define SST39WF1601	0x274b
+ #define SST39WF1602	0x274a
+ #define SST39LF512	0x00D4
+@@ -1569,6 +1570,18 @@
+ 			ERASEINFO(0x10000,64),
+ 		}
+ 	}, {
++		.mfr_id         = CFI_MFR_SST,
++		.dev_id         = SST39VF6401B,
++		.name           = "SST 39VF6401B",
++		.devtypes       = CFI_DEVICETYPE_X16,
++		.uaddr          = MTD_UADDR_0xAAAA_0x5555,
++		.dev_size       = SIZE_8MiB,
++		.cmd_set        = P_ID_AMD_STD,
++		.nr_regions     = 1,
++		.regions        = {
++			ERASEINFO(0x10000,128)
++		}
++	}, {
+ 		.mfr_id		= CFI_MFR_ST,
+ 		.dev_id		= M29F800AB,
+ 		.name		= "ST M29F800AB",
+diff -Nur linux-4.1.13.orig/drivers/mtd/cybertan_part.c linux-4.1.13/drivers/mtd/cybertan_part.c
+--- linux-4.1.13.orig/drivers/mtd/cybertan_part.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/mtd/cybertan_part.c	2015-09-13 20:04:35.072523889 +0200
+@@ -0,0 +1,201 @@
++/*
++ * Copyright (C) 2009 Christian Daniel <cd@maintech.de>
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
++ *
++ * TRX flash partition table.
++ * Based on ar7 map by Felix Fietkau <nbd@openwrt.org>
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++struct cybertan_header {
++	char	magic[4];
++	u8	res1[4];
++	char	fw_date[3];
++	char	fw_ver[3];
++	char	id[4];
++	char	hw_ver;
++	char	unused;
++	u8	flags[2];
++	u8	res2[10];
++};
++
++#define TRX_PARTS	6
++#define TRX_MAGIC	0x30524448
++#define TRX_MAX_OFFSET	3
++
++struct trx_header {
++	uint32_t magic;           /* "HDR0" */
++	uint32_t len;             /* Length of file including header */
++	uint32_t crc32;           /* 32-bit CRC from flag_version to end of file */
++	uint32_t flag_version;    /* 0:15 flags, 16:31 version */
++	uint32_t offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
++};
++
++#define IH_MAGIC	0x27051956	/* Image Magic Number */
++#define IH_NMLEN	32		/* Image Name Length */
++
++struct uimage_header {
++	uint32_t	ih_magic;	/* Image Header Magic Number */
++	uint32_t	ih_hcrc;	/* Image Header CRC Checksum */
++	uint32_t	ih_time;	/* Image Creation Timestamp */
++	uint32_t	ih_size;	/* Image Data Size */
++	uint32_t	ih_load;	/* Data» Load  Address */
++	uint32_t	ih_ep;		/* Entry Point Address */
++	uint32_t	ih_dcrc;	/* Image Data CRC Checksum */
++	uint8_t		ih_os;		/* Operating System */
++	uint8_t		ih_arch;	/* CPU architecture */
++	uint8_t		ih_type;	/* Image Type */
++	uint8_t		ih_comp;	/* Compression Type */
++	uint8_t		ih_name[IH_NMLEN];	/* Image Name */
++};
++
++struct firmware_header {
++	struct cybertan_header	cybertan;
++	struct trx_header	trx;
++	struct uimage_header	uimage;
++} __packed;
++
++#define UBOOT_LEN	0x40000
++#define ART_LEN		0x10000
++#define NVRAM_LEN	0x10000
++
++static int cybertan_parse_partitions(struct mtd_info *master,
++				     struct mtd_partition **pparts,
++				     struct mtd_part_parser_data *data)
++{
++	struct firmware_header *header;
++	struct trx_header *theader;
++	struct uimage_header *uheader;
++	struct mtd_partition *trx_parts;
++	size_t retlen;
++	unsigned int kernel_len;
++	unsigned int uboot_len;
++	unsigned int nvram_len;
++	unsigned int art_len;
++	int ret;
++
++	uboot_len = max_t(unsigned int, master->erasesize, UBOOT_LEN);
++	nvram_len = max_t(unsigned int, master->erasesize, NVRAM_LEN);
++	art_len = max_t(unsigned int, master->erasesize, ART_LEN);
++
++	trx_parts = kzalloc(TRX_PARTS * sizeof(struct mtd_partition),
++			    GFP_KERNEL);
++	if (!trx_parts) {
++		ret = -ENOMEM;
++		goto out;
++	}
++
++	header = vmalloc(sizeof(*header));
++	if (!header) {
++		return -ENOMEM;
++		goto free_parts;
++	}
++
++	ret = mtd_read(master, uboot_len, sizeof(*header),
++		       &retlen, (void *) header);
++	if (ret)
++		goto free_hdr;
++
++	if (retlen != sizeof(*header)) {
++		ret = -EIO;
++		goto free_hdr;
++	}
++
++	theader = &header->trx;
++	if (le32_to_cpu(theader->magic) != TRX_MAGIC) {
++		printk(KERN_NOTICE "%s: no TRX header found\n", master->name);
++		goto free_hdr;
++	}
++
++	uheader = &header->uimage;
++	if (uheader->ih_magic != IH_MAGIC) {
++		printk(KERN_NOTICE "%s: no uImage found\n", master->name);
++		goto free_hdr;
++	}
++
++	kernel_len = le32_to_cpu(theader->offsets[1]) +
++		sizeof(struct cybertan_header);
++
++	trx_parts[0].name = "u-boot";
++	trx_parts[0].offset = 0;
++	trx_parts[0].size = uboot_len;
++	trx_parts[0].mask_flags = MTD_WRITEABLE;
++
++	trx_parts[1].name = "kernel";
++	trx_parts[1].offset = trx_parts[0].offset + trx_parts[0].size;
++	trx_parts[1].size = kernel_len;
++	trx_parts[1].mask_flags = 0;
++
++	trx_parts[2].name = "rootfs";
++	trx_parts[2].offset = trx_parts[1].offset + trx_parts[1].size;
++	trx_parts[2].size = master->size - uboot_len - nvram_len - art_len -
++		trx_parts[1].size;
++	trx_parts[2].mask_flags = 0;
++
++	trx_parts[3].name = "nvram";
++	trx_parts[3].offset = master->size - nvram_len - art_len;
++	trx_parts[3].size = nvram_len;
++	trx_parts[3].mask_flags = MTD_WRITEABLE;
++
++	trx_parts[4].name = "art";
++	trx_parts[4].offset = master->size - art_len;
++	trx_parts[4].size = art_len;
++	trx_parts[4].mask_flags = MTD_WRITEABLE;
++
++	trx_parts[5].name = "firmware";
++	trx_parts[5].offset = uboot_len;
++	trx_parts[5].size = master->size - uboot_len - nvram_len - art_len;
++	trx_parts[5].mask_flags = 0;
++
++	vfree(header);
++
++	*pparts = trx_parts;
++	return TRX_PARTS;
++
++free_hdr:
++	vfree(header);
++free_parts:
++	kfree(trx_parts);
++out:
++	return ret;
++}
++
++static struct mtd_part_parser cybertan_parser = {
++	.owner		= THIS_MODULE,
++	.parse_fn	= cybertan_parse_partitions,
++	.name		= "cybertan",
++};
++
++static int __init cybertan_parser_init(void)
++{
++	register_mtd_parser(&cybertan_parser);
++
++	return 0;
++}
++
++module_init(cybertan_parser_init);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Daniel <cd@maintech.de>");
+diff -Nur linux-4.1.13.orig/drivers/mtd/devices/m25p80.c linux-4.1.13/drivers/mtd/devices/m25p80.c
+--- linux-4.1.13.orig/drivers/mtd/devices/m25p80.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/mtd/devices/m25p80.c	2015-12-04 19:57:03.966105410 +0100
+@@ -139,10 +139,15 @@
+ 	flash->command[0] = nor->read_opcode;
+ 	m25p_addr2cmd(nor, from, flash->command);
+ 
++	if (dummy == 1)
++		t[0].dummy = true;
++
++	t[0].type = SPI_TRANSFER_FLASH_READ_CMD;
+ 	t[0].tx_buf = flash->command;
+ 	t[0].len = m25p_cmdsz(nor) + dummy;
+ 	spi_message_add_tail(&t[0], &m);
+ 
++	t[1].type = SPI_TRANSFER_FLASH_READ_DATA;
+ 	t[1].rx_buf = buf;
+ 	t[1].rx_nbits = m25p80_rx_nbits(nor);
+ 	t[1].len = len;
+@@ -232,6 +237,7 @@
+ 	if (ret)
+ 		return ret;
+ 
++	memset(&ppdata, '\0', sizeof(ppdata));
+ 	ppdata.of_node = spi->dev.of_node;
+ 
+ 	return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
+diff -Nur linux-4.1.13.orig/drivers/mtd/Kconfig linux-4.1.13/drivers/mtd/Kconfig
+--- linux-4.1.13.orig/drivers/mtd/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/mtd/Kconfig	2015-12-04 19:57:03.850112998 +0100
+@@ -155,6 +155,12 @@
+ 	  This provides partitions parser for devices based on BCM47xx
+ 	  boards.
+ 
++config MTD_TPLINK_PARTS
++	tristate "TP-Link AR7XXX/AR9XXX partitioning support"
++	depends on ATH79
++	---help---
++	  TBD.
++
+ comment "User Modules And Translation Layers"
+ 
+ #
+diff -Nur linux-4.1.13.orig/drivers/mtd/maps/physmap.c linux-4.1.13/drivers/mtd/maps/physmap.c
+--- linux-4.1.13.orig/drivers/mtd/maps/physmap.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/mtd/maps/physmap.c	2015-12-04 19:57:03.830114307 +0100
+@@ -31,6 +31,66 @@
+ 	int			vpp_refcnt;
+ };
+ 
++static struct platform_device *physmap_map2pdev(struct map_info *map)
++{
++	return (struct platform_device *) map->map_priv_1;
++}
++
++static void physmap_lock(struct map_info *map)
++{
++	struct platform_device *pdev;
++	struct physmap_flash_data *physmap_data;
++
++	pdev = physmap_map2pdev(map);
++	physmap_data = pdev->dev.platform_data;
++	physmap_data->lock(pdev);
++}
++
++static void physmap_unlock(struct map_info *map)
++{
++	struct platform_device *pdev;
++	struct physmap_flash_data *physmap_data;
++
++	pdev = physmap_map2pdev(map);
++	physmap_data = pdev->dev.platform_data;
++	physmap_data->unlock(pdev);
++}
++
++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
++{
++	map_word ret;
++
++	physmap_lock(map);
++	ret = inline_map_read(map, ofs);
++	physmap_unlock(map);
++
++	return ret;
++}
++
++static void physmap_flash_write_lock(struct map_info *map, map_word d,
++				     unsigned long ofs)
++{
++	physmap_lock(map);
++	inline_map_write(map, d, ofs);
++	physmap_unlock(map);
++}
++
++static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
++					 unsigned long from, ssize_t len)
++{
++	physmap_lock(map);
++	inline_map_copy_from(map, to, from, len);
++	physmap_unlock(map);
++}
++
++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
++				       const void *from, ssize_t len)
++{
++	physmap_lock(map);
++	inline_map_copy_to(map, to, from, len);
++	physmap_unlock(map);
++}
++
+ static int physmap_flash_remove(struct platform_device *dev)
+ {
+ 	struct physmap_flash_info *info;
+@@ -153,6 +213,13 @@
+ 
+ 		simple_map_init(&info->map[i]);
+ 
++		if (physmap_data->lock && physmap_data->unlock) {
++			info->map[i].read = physmap_flash_read_lock;
++			info->map[i].write = physmap_flash_write_lock;
++			info->map[i].copy_from = physmap_flash_copy_from_lock;
++			info->map[i].copy_to = physmap_flash_copy_to_lock;
++		}
++
+ 		probe_type = rom_probe_types;
+ 		if (physmap_data->probe_type == NULL) {
+ 			for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+diff -Nur linux-4.1.13.orig/drivers/mtd/nand/ar934x_nfc.c linux-4.1.13/drivers/mtd/nand/ar934x_nfc.c
+--- linux-4.1.13.orig/drivers/mtd/nand/ar934x_nfc.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/mtd/nand/ar934x_nfc.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,1508 @@
++/*
++ * Driver for the built-in NAND controller of the Atheros AR934x SoCs
++ *
++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/dma-mapping.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++
++#include <linux/platform/ar934x_nfc.h>
++
++#define AR934X_NFC_REG_CMD		0x00
++#define AR934X_NFC_REG_CTRL		0x04
++#define AR934X_NFC_REG_STATUS		0x08
++#define AR934X_NFC_REG_INT_MASK		0x0c
++#define AR934X_NFC_REG_INT_STATUS	0x10
++#define AR934X_NFC_REG_ECC_CTRL		0x14
++#define AR934X_NFC_REG_ECC_OFFSET	0x18
++#define AR934X_NFC_REG_ADDR0_0		0x1c
++#define AR934X_NFC_REG_ADDR0_1		0x24
++#define AR934X_NFC_REG_ADDR1_0		0x20
++#define AR934X_NFC_REG_ADDR1_1		0x28
++#define AR934X_NFC_REG_SPARE_SIZE	0x30
++#define AR934X_NFC_REG_PROTECT		0x38
++#define AR934X_NFC_REG_LOOKUP_EN	0x40
++#define AR934X_NFC_REG_LOOKUP(_x)	(0x44 + (_i) * 4)
++#define AR934X_NFC_REG_DMA_ADDR		0x64
++#define AR934X_NFC_REG_DMA_COUNT	0x68
++#define AR934X_NFC_REG_DMA_CTRL		0x6c
++#define AR934X_NFC_REG_MEM_CTRL		0x80
++#define AR934X_NFC_REG_DATA_SIZE	0x84
++#define AR934X_NFC_REG_READ_STATUS	0x88
++#define AR934X_NFC_REG_TIME_SEQ		0x8c
++#define AR934X_NFC_REG_TIMINGS_ASYN	0x90
++#define AR934X_NFC_REG_TIMINGS_SYN	0x94
++#define AR934X_NFC_REG_FIFO_DATA	0x98
++#define AR934X_NFC_REG_TIME_MODE	0x9c
++#define AR934X_NFC_REG_DMA_ADDR_OFFS	0xa0
++#define AR934X_NFC_REG_FIFO_INIT	0xb0
++#define AR934X_NFC_REG_GEN_SEQ_CTRL	0xb4
++
++#define AR934X_NFC_CMD_CMD_SEQ_S		0
++#define AR934X_NFC_CMD_CMD_SEQ_M		0x3f
++#define   AR934X_NFC_CMD_SEQ_1C			0x00
++#define   AR934X_NFC_CMD_SEQ_ERASE		0x0e
++#define   AR934X_NFC_CMD_SEQ_12			0x0c
++#define   AR934X_NFC_CMD_SEQ_1C1AXR		0x21
++#define   AR934X_NFC_CMD_SEQ_S			0x24
++#define   AR934X_NFC_CMD_SEQ_1C3AXR		0x27
++#define   AR934X_NFC_CMD_SEQ_1C5A1CXR		0x2a
++#define   AR934X_NFC_CMD_SEQ_18			0x32
++#define AR934X_NFC_CMD_INPUT_SEL_SIU		0
++#define AR934X_NFC_CMD_INPUT_SEL_DMA		BIT(6)
++#define AR934X_NFC_CMD_ADDR_SEL_0		0
++#define AR934X_NFC_CMD_ADDR_SEL_1		BIT(7)
++#define AR934X_NFC_CMD_CMD0_S			8
++#define AR934X_NFC_CMD_CMD0_M			0xff
++#define AR934X_NFC_CMD_CMD1_S			16
++#define AR934X_NFC_CMD_CMD1_M			0xff
++#define AR934X_NFC_CMD_CMD2_S			24
++#define AR934X_NFC_CMD_CMD2_M			0xff
++
++#define AR934X_NFC_CTRL_ADDR_CYCLE0_M		0x7
++#define AR934X_NFC_CTRL_ADDR_CYCLE0_S		0
++#define AR934X_NFC_CTRL_SPARE_EN		BIT(3)
++#define AR934X_NFC_CTRL_INT_EN			BIT(4)
++#define AR934X_NFC_CTRL_ECC_EN			BIT(5)
++#define AR934X_NFC_CTRL_BLOCK_SIZE_S		6
++#define AR934X_NFC_CTRL_BLOCK_SIZE_M		0x3
++#define   AR934X_NFC_CTRL_BLOCK_SIZE_32		0
++#define   AR934X_NFC_CTRL_BLOCK_SIZE_64		1
++#define   AR934X_NFC_CTRL_BLOCK_SIZE_128	2
++#define   AR934X_NFC_CTRL_BLOCK_SIZE_256	3
++#define AR934X_NFC_CTRL_PAGE_SIZE_S		8
++#define AR934X_NFC_CTRL_PAGE_SIZE_M		0x7
++#define   AR934X_NFC_CTRL_PAGE_SIZE_256		0
++#define   AR934X_NFC_CTRL_PAGE_SIZE_512		1
++#define   AR934X_NFC_CTRL_PAGE_SIZE_1024	2
++#define   AR934X_NFC_CTRL_PAGE_SIZE_2048	3
++#define   AR934X_NFC_CTRL_PAGE_SIZE_4096	4
++#define   AR934X_NFC_CTRL_PAGE_SIZE_8192	5
++#define   AR934X_NFC_CTRL_PAGE_SIZE_16384	6
++#define AR934X_NFC_CTRL_CUSTOM_SIZE_EN		BIT(11)
++#define AR934X_NFC_CTRL_IO_WIDTH_8BITS		0
++#define AR934X_NFC_CTRL_IO_WIDTH_16BITS		BIT(12)
++#define AR934X_NFC_CTRL_LOOKUP_EN		BIT(13)
++#define AR934X_NFC_CTRL_PROT_EN			BIT(14)
++#define AR934X_NFC_CTRL_WORK_MODE_ASYNC		0
++#define AR934X_NFC_CTRL_WORK_MODE_SYNC		BIT(15)
++#define AR934X_NFC_CTRL_ADDR0_AUTO_INC		BIT(16)
++#define AR934X_NFC_CTRL_ADDR1_AUTO_INC		BIT(17)
++#define AR934X_NFC_CTRL_ADDR_CYCLE1_M		0x7
++#define AR934X_NFC_CTRL_ADDR_CYCLE1_S		18
++#define AR934X_NFC_CTRL_SMALL_PAGE		BIT(21)
++
++#define AR934X_NFC_DMA_CTRL_DMA_START		BIT(7)
++#define AR934X_NFC_DMA_CTRL_DMA_DIR_WRITE	0
++#define AR934X_NFC_DMA_CTRL_DMA_DIR_READ	BIT(6)
++#define AR934X_NFC_DMA_CTRL_DMA_MODE_SG		BIT(5)
++#define AR934X_NFC_DMA_CTRL_DMA_BURST_S		2
++#define AR934X_NFC_DMA_CTRL_DMA_BURST_0		0
++#define AR934X_NFC_DMA_CTRL_DMA_BURST_1		1
++#define AR934X_NFC_DMA_CTRL_DMA_BURST_2		2
++#define AR934X_NFC_DMA_CTRL_DMA_BURST_3		3
++#define AR934X_NFC_DMA_CTRL_DMA_BURST_4		4
++#define AR934X_NFC_DMA_CTRL_DMA_BURST_5		5
++#define AR934X_NFC_DMA_CTRL_ERR_FLAG		BIT(1)
++#define AR934X_NFC_DMA_CTRL_DMA_READY		BIT(0)
++
++#define AR934X_NFC_INT_DEV_RDY(_x)		BIT(4 + (_x))
++#define AR934X_NFC_INT_CMD_END			BIT(1)
++
++#define AR934X_NFC_ECC_CTRL_ERR_THRES_S		8
++#define AR934X_NFC_ECC_CTRL_ERR_THRES_M		0x1f
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_S		5
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_M		0x7
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_2		0
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_4		1
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_6		2
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_8		3
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_10		4
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_12		5
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_14		6
++#define AR934X_NFC_ECC_CTRL_ECC_CAP_16		7
++#define AR934X_NFC_ECC_CTRL_ERR_OVER		BIT(2)
++#define AR934X_NFC_ECC_CTRL_ERR_UNCORRECT	BIT(1)
++#define AR934X_NFC_ECC_CTRL_ERR_CORRECT		BIT(0)
++
++#define AR934X_NFC_ECC_OFFS_OFSET_M		0xffff
++
++/* default timing values */
++#define AR934X_NFC_TIME_SEQ_DEFAULT	0x7fff
++#define AR934X_NFC_TIMINGS_ASYN_DEFAULT	0x22
++#define AR934X_NFC_TIMINGS_SYN_DEFAULT	0xf
++
++#define AR934X_NFC_ID_BUF_SIZE		8
++#define AR934X_NFC_DEV_READY_TIMEOUT	25 /* msecs */
++#define AR934X_NFC_DMA_READY_TIMEOUT	25 /* msecs */
++#define AR934X_NFC_DONE_TIMEOUT		1000
++#define AR934X_NFC_DMA_RETRIES		20
++
++#define AR934X_NFC_USE_IRQ		true
++#define AR934X_NFC_IRQ_MASK		AR934X_NFC_INT_DEV_RDY(0)
++
++#define  AR934X_NFC_GENSEQ_SMALL_PAGE_READ	0x30043
++
++#undef AR934X_NFC_DEBUG_DATA
++#undef AR934X_NFC_DEBUG
++
++struct ar934x_nfc;
++
++static inline  __attribute__ ((format (printf, 2, 3)))
++void _nfc_dbg(struct ar934x_nfc *nfc, const char *fmt, ...)
++{
++}
++
++#ifdef AR934X_NFC_DEBUG
++#define nfc_dbg(_nfc, fmt, ...) \
++	dev_info((_nfc)->parent, fmt, ##__VA_ARGS__)
++#else
++#define nfc_dbg(_nfc, fmt, ...) \
++	_nfc_dbg((_nfc), fmt, ##__VA_ARGS__)
++#endif /* AR934X_NFC_DEBUG */
++
++#ifdef AR934X_NFC_DEBUG_DATA
++static void
++nfc_debug_data(const char *label, void *data, int len)
++{
++	print_hex_dump(KERN_WARNING, label, DUMP_PREFIX_OFFSET, 16, 1,
++		       data, len, 0);
++}
++#else
++static inline void
++nfc_debug_data(const char *label, void *data, int len) {}
++#endif /* AR934X_NFC_DEBUG_DATA */
++
++struct ar934x_nfc {
++	struct mtd_info mtd;
++	struct nand_chip nand_chip;
++	struct device *parent;
++	void __iomem *base;
++	void (*select_chip)(int chip_no);
++	bool swap_dma;
++	int irq;
++	wait_queue_head_t irq_waitq;
++
++	bool spurious_irq_expected;
++	u32 irq_status;
++
++	u32 ctrl_reg;
++	u32 ecc_ctrl_reg;
++	u32 ecc_offset_reg;
++	u32 ecc_thres;
++	u32 ecc_oob_pos;
++
++	bool small_page;
++	unsigned int addr_count0;
++	unsigned int addr_count1;
++
++	u8 *buf;
++	dma_addr_t buf_dma;
++	unsigned int buf_size;
++	int buf_index;
++
++	bool read_id;
++
++	int erase1_page_addr;
++
++	int rndout_page_addr;
++	int rndout_read_cmd;
++
++	int seqin_page_addr;
++	int seqin_column;
++	int seqin_read_cmd;
++};
++
++static void ar934x_nfc_restart(struct ar934x_nfc *nfc);
++
++static inline bool
++is_all_ff(u8 *buf, int len)
++{
++	while (len--)
++		if (buf[len] != 0xff)
++			return false;
++
++	return true;
++}
++
++static inline void
++ar934x_nfc_wr(struct ar934x_nfc *nfc, unsigned reg, u32 val)
++{
++	__raw_writel(val, nfc->base + reg);
++}
++
++static inline u32
++ar934x_nfc_rr(struct ar934x_nfc *nfc, unsigned reg)
++{
++	return __raw_readl(nfc->base + reg);
++}
++
++static inline struct ar934x_nfc_platform_data *
++ar934x_nfc_get_platform_data(struct ar934x_nfc *nfc)
++{
++	return nfc->parent->platform_data;
++}
++
++static inline struct
++ar934x_nfc *mtd_to_ar934x_nfc(struct mtd_info *mtd)
++{
++	return container_of(mtd, struct ar934x_nfc, mtd);
++}
++
++static inline bool ar934x_nfc_use_irq(struct ar934x_nfc *nfc)
++{
++	return AR934X_NFC_USE_IRQ;
++}
++
++static inline void ar934x_nfc_write_cmd_reg(struct ar934x_nfc *nfc, u32 cmd_reg)
++{
++	wmb();
++
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_CMD, cmd_reg);
++	/* flush write */
++	ar934x_nfc_rr(nfc, AR934X_NFC_REG_CMD);
++}
++
++static bool
++__ar934x_nfc_dev_ready(struct ar934x_nfc *nfc)
++{
++	u32 status;
++
++	status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_STATUS);
++	return (status & 0xff) == 0xff;
++}
++
++static inline bool
++__ar934x_nfc_is_dma_ready(struct ar934x_nfc *nfc)
++{
++	u32 status;
++
++	status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_DMA_CTRL);
++	return (status & AR934X_NFC_DMA_CTRL_DMA_READY) != 0;
++}
++
++static int
++ar934x_nfc_wait_dev_ready(struct ar934x_nfc *nfc)
++{
++	unsigned long timeout;
++
++	timeout = jiffies + msecs_to_jiffies(AR934X_NFC_DEV_READY_TIMEOUT);
++	do {
++		if (__ar934x_nfc_dev_ready(nfc))
++			return 0;
++	} while time_before(jiffies, timeout);
++
++	nfc_dbg(nfc, "timeout waiting for device ready, status:%08x int:%08x\n",
++		ar934x_nfc_rr(nfc, AR934X_NFC_REG_STATUS),
++		ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS));
++	return -ETIMEDOUT;
++}
++
++static int
++ar934x_nfc_wait_dma_ready(struct ar934x_nfc *nfc)
++{
++	unsigned long timeout;
++
++	timeout = jiffies + msecs_to_jiffies(AR934X_NFC_DMA_READY_TIMEOUT);
++	do {
++		if (__ar934x_nfc_is_dma_ready(nfc))
++			return 0;
++	} while time_before(jiffies, timeout);
++
++	nfc_dbg(nfc, "timeout waiting for DMA ready, dma_ctrl:%08x\n",
++		ar934x_nfc_rr(nfc, AR934X_NFC_REG_DMA_CTRL));
++	return -ETIMEDOUT;
++}
++
++static int
++ar934x_nfc_wait_irq(struct ar934x_nfc *nfc)
++{
++	long timeout;
++	int ret;
++
++	timeout = wait_event_timeout(nfc->irq_waitq,
++				(nfc->irq_status & AR934X_NFC_IRQ_MASK) != 0,
++				msecs_to_jiffies(AR934X_NFC_DEV_READY_TIMEOUT));
++
++	ret = 0;
++	if (!timeout) {
++		ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_MASK, 0);
++		ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
++		/* flush write */
++		ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS);
++
++		nfc_dbg(nfc,
++			"timeout waiting for interrupt, status:%08x\n",
++			nfc->irq_status);
++		ret = -ETIMEDOUT;
++	}
++
++	nfc->irq_status = 0;
++	return ret;
++}
++
++static int
++ar934x_nfc_wait_done(struct ar934x_nfc *nfc)
++{
++	int ret;
++
++	if (ar934x_nfc_use_irq(nfc))
++		ret = ar934x_nfc_wait_irq(nfc);
++	else
++		ret = ar934x_nfc_wait_dev_ready(nfc);
++
++	if (ret)
++		return ret;
++
++	return ar934x_nfc_wait_dma_ready(nfc);
++}
++
++static int
++ar934x_nfc_alloc_buf(struct ar934x_nfc *nfc, unsigned size)
++{
++	nfc->buf = dma_alloc_coherent(nfc->parent, size,
++				      &nfc->buf_dma, GFP_KERNEL);
++	if (nfc->buf == NULL) {
++		dev_err(nfc->parent, "no memory for DMA buffer\n");
++		return -ENOMEM;
++	}
++
++	nfc->buf_size = size;
++	nfc_dbg(nfc, "buf:%p size:%u\n", nfc->buf, nfc->buf_size);
++
++	return 0;
++}
++
++static void
++ar934x_nfc_free_buf(struct ar934x_nfc *nfc)
++{
++	dma_free_coherent(nfc->parent, nfc->buf_size, nfc->buf, nfc->buf_dma);
++}
++
++static void
++ar934x_nfc_get_addr(struct ar934x_nfc *nfc, int column, int page_addr,
++		    u32 *addr0, u32 *addr1)
++{
++	u32 a0, a1;
++
++	a0 = 0;
++	a1 = 0;
++
++	if (column == -1) {
++		/* ERASE1 */
++		a0 = (page_addr & 0xffff) << 16;
++		a1 = (page_addr >> 16) & 0xf;
++	} else if (page_addr != -1) {
++		/* SEQIN, READ0, etc.. */
++
++		/* TODO: handle 16bit bus width */
++		if (nfc->small_page) {
++			a0 = column & 0xff;
++			a0 |= (page_addr & 0xff) << 8;
++			a0 |= ((page_addr >> 8) & 0xff) << 16;
++			a0 |= ((page_addr >> 16) & 0xff) << 24;
++		} else {
++			a0 = column & 0x0FFF;
++			a0 |= (page_addr & 0xffff) << 16;
++
++			if (nfc->addr_count0 > 4)
++				a1 = (page_addr >> 16) & 0xf;
++		}
++	}
++
++	*addr0 = a0;
++	*addr1 = a1;
++}
++
++static void
++ar934x_nfc_send_cmd(struct ar934x_nfc *nfc, unsigned command)
++{
++	u32 cmd_reg;
++
++	cmd_reg = AR934X_NFC_CMD_INPUT_SEL_SIU | AR934X_NFC_CMD_ADDR_SEL_0 |
++		  AR934X_NFC_CMD_SEQ_1C;
++	cmd_reg |= (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S;
++
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
++
++	ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
++	ar934x_nfc_wait_dev_ready(nfc);
++}
++
++static int
++ar934x_nfc_do_rw_command(struct ar934x_nfc *nfc, int column, int page_addr,
++			 int len, u32 cmd_reg, u32 ctrl_reg, bool write)
++{
++	u32 addr0, addr1;
++	u32 dma_ctrl;
++	int dir;
++	int err;
++	int retries = 0;
++
++	WARN_ON(len & 3);
++
++	if (WARN_ON(len > nfc->buf_size))
++		dev_err(nfc->parent, "len=%d > buf_size=%d", len, nfc->buf_size);
++
++	if (write) {
++		dma_ctrl = AR934X_NFC_DMA_CTRL_DMA_DIR_WRITE;
++		dir = DMA_TO_DEVICE;
++	} else {
++		dma_ctrl = AR934X_NFC_DMA_CTRL_DMA_DIR_READ;
++		dir = DMA_FROM_DEVICE;
++	}
++
++	ar934x_nfc_get_addr(nfc, column, page_addr, &addr0, &addr1);
++
++	dma_ctrl |= AR934X_NFC_DMA_CTRL_DMA_START |
++		    (AR934X_NFC_DMA_CTRL_DMA_BURST_3 <<
++		     AR934X_NFC_DMA_CTRL_DMA_BURST_S);
++
++	cmd_reg |= AR934X_NFC_CMD_INPUT_SEL_DMA | AR934X_NFC_CMD_ADDR_SEL_0;
++	ctrl_reg |= AR934X_NFC_CTRL_INT_EN;
++
++	nfc_dbg(nfc, "%s a0:%08x a1:%08x len:%x cmd:%08x dma:%08x ctrl:%08x\n",
++		(write) ? "write" : "read",
++		addr0, addr1, len, cmd_reg, dma_ctrl, ctrl_reg);
++
++retry:
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_0, addr0);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_1, addr1);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_ADDR, nfc->buf_dma);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_COUNT, len);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_DATA_SIZE, len);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, ctrl_reg);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_CTRL, dma_ctrl);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_ECC_CTRL, nfc->ecc_ctrl_reg);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_ECC_OFFSET, nfc->ecc_offset_reg);
++
++	if (ar934x_nfc_use_irq(nfc)) {
++		ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_MASK, AR934X_NFC_IRQ_MASK);
++		/* flush write */
++		ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_MASK);
++	}
++
++	ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
++	err = ar934x_nfc_wait_done(nfc);
++	if (err) {
++		dev_dbg(nfc->parent, "%s operation stuck at page %d\n",
++			(write) ? "write" : "read", page_addr);
++
++		ar934x_nfc_restart(nfc);
++		if (retries++ < AR934X_NFC_DMA_RETRIES)
++			goto retry;
++
++		dev_err(nfc->parent, "%s operation failed on page %d\n",
++			(write) ? "write" : "read", page_addr);
++	}
++
++	return err;
++}
++
++static int
++ar934x_nfc_send_readid(struct ar934x_nfc *nfc, unsigned command)
++{
++	u32 cmd_reg;
++	int err;
++
++	nfc_dbg(nfc, "readid, cmd:%02x\n", command);
++
++	cmd_reg = AR934X_NFC_CMD_SEQ_1C1AXR;
++	cmd_reg |= (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S;
++
++	err = ar934x_nfc_do_rw_command(nfc, -1, -1, AR934X_NFC_ID_BUF_SIZE,
++				       cmd_reg, nfc->ctrl_reg, false);
++
++	nfc_debug_data("[id] ", nfc->buf, AR934X_NFC_ID_BUF_SIZE);
++
++	return err;
++}
++
++static int
++ar934x_nfc_send_read(struct ar934x_nfc *nfc, unsigned command, int column,
++		     int page_addr, int len)
++{
++	u32 cmd_reg;
++	int err;
++
++	nfc_dbg(nfc, "read, column=%d page=%d len=%d\n",
++		column, page_addr, len);
++
++	cmd_reg = (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S;
++
++	if (nfc->small_page) {
++		cmd_reg |= AR934X_NFC_CMD_SEQ_18;
++	} else {
++		cmd_reg |= NAND_CMD_READSTART << AR934X_NFC_CMD_CMD1_S;
++		cmd_reg |= AR934X_NFC_CMD_SEQ_1C5A1CXR;
++	}
++
++	err = ar934x_nfc_do_rw_command(nfc, column, page_addr, len,
++				       cmd_reg, nfc->ctrl_reg, false);
++
++	nfc_debug_data("[data] ", nfc->buf, len);
++
++	return err;
++}
++
++static void
++ar934x_nfc_send_erase(struct ar934x_nfc *nfc, unsigned command, int column,
++		      int page_addr)
++{
++	u32 addr0, addr1;
++	u32 ctrl_reg;
++	u32 cmd_reg;
++
++	ar934x_nfc_get_addr(nfc, column, page_addr, &addr0, &addr1);
++
++	ctrl_reg = nfc->ctrl_reg;
++	if (nfc->small_page) {
++		/* override number of address cycles for the erase command */
++		ctrl_reg &= ~(AR934X_NFC_CTRL_ADDR_CYCLE0_M <<
++			      AR934X_NFC_CTRL_ADDR_CYCLE0_S);
++		ctrl_reg &= ~(AR934X_NFC_CTRL_ADDR_CYCLE1_M <<
++			      AR934X_NFC_CTRL_ADDR_CYCLE1_S);
++		ctrl_reg &= ~(AR934X_NFC_CTRL_SMALL_PAGE);
++		ctrl_reg |= (nfc->addr_count0 + 1) <<
++			    AR934X_NFC_CTRL_ADDR_CYCLE0_S;
++	}
++
++	cmd_reg = NAND_CMD_ERASE1 << AR934X_NFC_CMD_CMD0_S;
++	cmd_reg |= command << AR934X_NFC_CMD_CMD1_S;
++	cmd_reg |= AR934X_NFC_CMD_SEQ_ERASE;
++
++	nfc_dbg(nfc, "erase page %d, a0:%08x a1:%08x cmd:%08x ctrl:%08x\n",
++		page_addr, addr0, addr1, cmd_reg, ctrl_reg);
++
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, ctrl_reg);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_0, addr0);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_1, addr1);
++
++	ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
++	ar934x_nfc_wait_dev_ready(nfc);
++}
++
++static int
++ar934x_nfc_send_write(struct ar934x_nfc *nfc, unsigned command, int column,
++		     int page_addr, int len)
++{
++	u32 cmd_reg;
++
++	nfc_dbg(nfc, "write, column=%d page=%d len=%d\n",
++		column, page_addr, len);
++
++	nfc_debug_data("[data] ", nfc->buf, len);
++
++	cmd_reg = NAND_CMD_SEQIN << AR934X_NFC_CMD_CMD0_S;
++	cmd_reg |= command << AR934X_NFC_CMD_CMD1_S;
++	cmd_reg |= AR934X_NFC_CMD_SEQ_12;
++
++	return ar934x_nfc_do_rw_command(nfc, column, page_addr, len,
++					cmd_reg, nfc->ctrl_reg, true);
++}
++
++static void
++ar934x_nfc_read_status(struct ar934x_nfc *nfc)
++{
++	u32 cmd_reg;
++	u32 status;
++
++	cmd_reg = NAND_CMD_STATUS << AR934X_NFC_CMD_CMD0_S;
++	cmd_reg |= AR934X_NFC_CMD_SEQ_S;
++
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
++
++	ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
++	ar934x_nfc_wait_dev_ready(nfc);
++
++	status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_READ_STATUS);
++
++	nfc_dbg(nfc, "read status, cmd:%08x status:%02x\n",
++		cmd_reg, (status & 0xff));
++
++	if (nfc->swap_dma)
++		nfc->buf[0 ^ 3] = status;
++	else
++		nfc->buf[0] = status;
++}
++
++static void
++ar934x_nfc_cmdfunc(struct mtd_info *mtd, unsigned int command, int column,
++		   int page_addr)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	struct nand_chip *nand = mtd->priv;
++
++	nfc->read_id = false;
++	if (command != NAND_CMD_PAGEPROG)
++		nfc->buf_index = 0;
++
++	switch (command) {
++	case NAND_CMD_RESET:
++		ar934x_nfc_send_cmd(nfc, command);
++		break;
++
++	case NAND_CMD_READID:
++		nfc->read_id = true;
++		ar934x_nfc_send_readid(nfc, command);
++		break;
++
++	case NAND_CMD_READ0:
++	case NAND_CMD_READ1:
++		if (nfc->small_page) {
++			ar934x_nfc_send_read(nfc, command, column, page_addr,
++					     mtd->writesize + mtd->oobsize);
++		} else {
++			ar934x_nfc_send_read(nfc, command, 0, page_addr,
++					     mtd->writesize + mtd->oobsize);
++			nfc->buf_index = column;
++			nfc->rndout_page_addr = page_addr;
++			nfc->rndout_read_cmd = command;
++		}
++		break;
++
++	case NAND_CMD_READOOB:
++		if (nfc->small_page)
++			ar934x_nfc_send_read(nfc, NAND_CMD_READOOB,
++					     column, page_addr,
++					     mtd->oobsize);
++		else
++			ar934x_nfc_send_read(nfc, NAND_CMD_READ0,
++					     mtd->writesize, page_addr,
++					     mtd->oobsize);
++		break;
++
++	case NAND_CMD_RNDOUT:
++		if (WARN_ON(nfc->small_page))
++			break;
++
++		/* emulate subpage read */
++		ar934x_nfc_send_read(nfc, nfc->rndout_read_cmd, 0,
++				     nfc->rndout_page_addr,
++				     mtd->writesize + mtd->oobsize);
++		nfc->buf_index = column;
++		break;
++
++	case NAND_CMD_ERASE1:
++		nfc->erase1_page_addr = page_addr;
++		break;
++
++	case NAND_CMD_ERASE2:
++		ar934x_nfc_send_erase(nfc, command, -1, nfc->erase1_page_addr);
++		break;
++
++	case NAND_CMD_STATUS:
++		ar934x_nfc_read_status(nfc);
++		break;
++
++	case NAND_CMD_SEQIN:
++		if (nfc->small_page) {
++			/* output read command */
++			if (column >= mtd->writesize) {
++				column -= mtd->writesize;
++				nfc->seqin_read_cmd = NAND_CMD_READOOB;
++			} else if (column < 256) {
++				nfc->seqin_read_cmd = NAND_CMD_READ0;
++			} else {
++				column -= 256;
++				nfc->seqin_read_cmd = NAND_CMD_READ1;
++			}
++		} else {
++			nfc->seqin_read_cmd = NAND_CMD_READ0;
++		}
++		nfc->seqin_column = column;
++		nfc->seqin_page_addr = page_addr;
++		break;
++
++	case NAND_CMD_PAGEPROG:
++		if (nand->ecc.mode == NAND_ECC_HW) {
++			/* the data is already written */
++			break;
++		}
++
++		if (nfc->small_page)
++			ar934x_nfc_send_cmd(nfc, nfc->seqin_read_cmd);
++
++		ar934x_nfc_send_write(nfc, command, nfc->seqin_column,
++				      nfc->seqin_page_addr,
++				      nfc->buf_index);
++		break;
++
++	default:
++		dev_err(nfc->parent,
++			"unsupported command: %x, column:%d page_addr=%d\n",
++			command, column, page_addr);
++		break;
++	}
++}
++
++static int
++ar934x_nfc_dev_ready(struct mtd_info *mtd)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++
++	return __ar934x_nfc_dev_ready(nfc);
++}
++
++static void
++ar934x_nfc_select_chip(struct mtd_info *mtd, int chip_no)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++
++	if (nfc->select_chip)
++		nfc->select_chip(chip_no);
++}
++
++static u8
++ar934x_nfc_read_byte(struct mtd_info *mtd)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	u8 data;
++
++	WARN_ON(nfc->buf_index >= nfc->buf_size);
++
++	if (nfc->swap_dma || nfc->read_id)
++		data = nfc->buf[nfc->buf_index ^ 3];
++	else
++		data = nfc->buf[nfc->buf_index];
++
++	nfc->buf_index++;
++
++	return data;
++}
++
++static void
++ar934x_nfc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	int i;
++
++	WARN_ON(nfc->buf_index + len > nfc->buf_size);
++
++	if (nfc->swap_dma) {
++		for (i = 0; i < len; i++) {
++			nfc->buf[nfc->buf_index ^ 3] = buf[i];
++			nfc->buf_index++;
++		}
++	} else {
++		for (i = 0; i < len; i++) {
++			nfc->buf[nfc->buf_index] = buf[i];
++			nfc->buf_index++;
++		}
++	}
++}
++
++static void
++ar934x_nfc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	int buf_index;
++	int i;
++
++	WARN_ON(nfc->buf_index + len > nfc->buf_size);
++
++	buf_index = nfc->buf_index;
++
++	if (nfc->swap_dma || nfc->read_id) {
++		for (i = 0; i < len; i++) {
++			buf[i] = nfc->buf[buf_index ^ 3];
++			buf_index++;
++		}
++	} else {
++		for (i = 0; i < len; i++) {
++			buf[i] = nfc->buf[buf_index];
++			buf_index++;
++		}
++	}
++
++	nfc->buf_index = buf_index;
++}
++
++static inline void
++ar934x_nfc_enable_hwecc(struct ar934x_nfc *nfc)
++{
++	nfc->ctrl_reg |= AR934X_NFC_CTRL_ECC_EN;
++	nfc->ctrl_reg &= ~AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
++}
++
++static inline void
++ar934x_nfc_disable_hwecc(struct ar934x_nfc *nfc)
++{
++	nfc->ctrl_reg &= ~AR934X_NFC_CTRL_ECC_EN;
++	nfc->ctrl_reg |= AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
++}
++
++static int
++ar934x_nfc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
++		    int page)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	int err;
++
++	nfc_dbg(nfc, "read_oob: page:%d\n", page);
++
++	err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, mtd->writesize, page,
++				   mtd->oobsize);
++	if (err)
++		return err;
++
++	memcpy(chip->oob_poi, nfc->buf, mtd->oobsize);
++
++	return 0;
++}
++
++static int
++ar934x_nfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
++		     int page)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++
++	nfc_dbg(nfc, "write_oob: page:%d\n", page);
++
++	memcpy(nfc->buf, chip->oob_poi, mtd->oobsize);
++
++	return ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, mtd->writesize,
++				     page, mtd->oobsize);
++}
++
++static int
++ar934x_nfc_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
++			 u8 *buf, int oob_required, int page)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	int len;
++	int err;
++
++	nfc_dbg(nfc, "read_page_raw: page:%d oob:%d\n", page, oob_required);
++
++	len = mtd->writesize;
++	if (oob_required)
++		len += mtd->oobsize;
++
++	err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, 0, page, len);
++	if (err)
++		return err;
++
++	memcpy(buf, nfc->buf, mtd->writesize);
++
++	if (oob_required)
++		memcpy(chip->oob_poi, &nfc->buf[mtd->writesize], mtd->oobsize);
++
++	return 0;
++}
++
++static int
++ar934x_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
++		     u8 *buf, int oob_required, int page)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	u32 ecc_ctrl;
++	int max_bitflips = 0;
++	bool ecc_failed;
++	bool ecc_corrected;
++	int err;
++
++	nfc_dbg(nfc, "read_page: page:%d oob:%d\n", page, oob_required);
++
++	ar934x_nfc_enable_hwecc(nfc);
++	err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, 0, page,
++				   mtd->writesize);
++	ar934x_nfc_disable_hwecc(nfc);
++
++	if (err)
++		return err;
++
++	/* TODO: optimize to avoid memcpy */
++	memcpy(buf, nfc->buf, mtd->writesize);
++
++	/* read the ECC status */
++	ecc_ctrl = ar934x_nfc_rr(nfc, AR934X_NFC_REG_ECC_CTRL);
++	ecc_failed = ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_UNCORRECT;
++	ecc_corrected = ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_CORRECT;
++
++	if (oob_required || ecc_failed) {
++		err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, mtd->writesize,
++					   page, mtd->oobsize);
++		if (err)
++			return err;
++
++		if (oob_required)
++			memcpy(chip->oob_poi, nfc->buf, mtd->oobsize);
++	}
++
++	if (ecc_failed) {
++		/*
++		 * The hardware ECC engine reports uncorrectable errors
++		 * on empty pages. Check the ECC bytes and the data. If
++		 * both contains 0xff bytes only, dont report a failure.
++		 *
++		 * TODO: prebuild a buffer with 0xff bytes and use memcmp
++		 * for better performance?
++		 */
++		if (!is_all_ff(&nfc->buf[nfc->ecc_oob_pos], chip->ecc.total) ||
++		    !is_all_ff(buf, mtd->writesize))
++				mtd->ecc_stats.failed++;
++	} else if (ecc_corrected) {
++		/*
++		 * The hardware does not report the exact count of the
++		 * corrected bitflips, use assumptions based on the
++		 * threshold.
++		 */
++		if (ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_OVER) {
++			/*
++			 * The number of corrected bitflips exceeds the
++			 * threshold. Assume the maximum.
++			 */
++			max_bitflips = chip->ecc.strength * chip->ecc.steps;
++		} else {
++			max_bitflips = nfc->ecc_thres * chip->ecc.steps;
++		}
++
++		mtd->ecc_stats.corrected += max_bitflips;
++	}
++
++	return max_bitflips;
++}
++
++static int
++ar934x_nfc_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
++			  const u8 *buf, int oob_required)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	int page;
++	int len;
++
++	page = nfc->seqin_page_addr;
++
++	nfc_dbg(nfc, "write_page_raw: page:%d oob:%d\n", page, oob_required);
++
++	memcpy(nfc->buf, buf, mtd->writesize);
++	len = mtd->writesize;
++
++	if (oob_required) {
++		memcpy(&nfc->buf[mtd->writesize], chip->oob_poi, mtd->oobsize);
++		len += mtd->oobsize;
++	}
++
++	return ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, 0, page, len);
++}
++
++static int
++ar934x_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
++		      const u8 *buf, int oob_required)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	int page;
++	int err;
++
++	page = nfc->seqin_page_addr;
++
++	nfc_dbg(nfc, "write_page: page:%d oob:%d\n", page, oob_required);
++
++	/* write OOB first */
++	if (oob_required &&
++	    !is_all_ff(chip->oob_poi, mtd->oobsize)) {
++		err = ar934x_nfc_write_oob(mtd, chip, page);
++		if (err)
++			return err;
++	}
++
++	/* TODO: optimize to avoid memcopy */
++	memcpy(nfc->buf, buf, mtd->writesize);
++
++	ar934x_nfc_enable_hwecc(nfc);
++	err = ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, 0, page,
++				    mtd->writesize);
++	ar934x_nfc_disable_hwecc(nfc);
++
++	return err;
++}
++
++static void
++ar934x_nfc_hw_init(struct ar934x_nfc *nfc)
++{
++	struct ar934x_nfc_platform_data *pdata;
++
++	pdata = ar934x_nfc_get_platform_data(nfc);
++	if (pdata->hw_reset) {
++		pdata->hw_reset(true);
++		pdata->hw_reset(false);
++	}
++
++	/*
++	 * setup timings
++	 * TODO: make it configurable via platform data
++	 */
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIME_SEQ,
++		      AR934X_NFC_TIME_SEQ_DEFAULT);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIMINGS_ASYN,
++		      AR934X_NFC_TIMINGS_ASYN_DEFAULT);
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIMINGS_SYN,
++		      AR934X_NFC_TIMINGS_SYN_DEFAULT);
++
++	/* disable WP on all chips, and select chip 0 */
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_MEM_CTRL, 0xff00);
++
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_ADDR_OFFS, 0);
++
++	/* initialize Control register */
++	nfc->ctrl_reg = AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
++
++	if (nfc->small_page) {
++		/*  Setup generic sequence register for small page reads. */
++		ar934x_nfc_wr(nfc, AR934X_NFC_REG_GEN_SEQ_CTRL,
++			      AR934X_NFC_GENSEQ_SMALL_PAGE_READ);
++	}
++}
++
++static void
++ar934x_nfc_restart(struct ar934x_nfc *nfc)
++{
++	u32 ctrl_reg;
++
++	if (nfc->select_chip)
++		nfc->select_chip(-1);
++
++	ctrl_reg = nfc->ctrl_reg;
++	ar934x_nfc_hw_init(nfc);
++	nfc->ctrl_reg = ctrl_reg;
++
++	if (nfc->select_chip)
++		nfc->select_chip(0);
++
++	ar934x_nfc_send_cmd(nfc, NAND_CMD_RESET);
++}
++
++static irqreturn_t
++ar934x_nfc_irq_handler(int irq, void *data)
++{
++	struct ar934x_nfc *nfc = data;
++	u32 status;
++
++	status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS);
++
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
++	/* flush write */
++	ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS);
++
++	status &= ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_MASK);
++	if (status) {
++		nfc_dbg(nfc, "got IRQ, status:%08x\n", status);
++
++		nfc->irq_status = status;
++		nfc->spurious_irq_expected = true;
++		wake_up(&nfc->irq_waitq);
++	} else {
++		if (nfc->spurious_irq_expected) {
++			nfc->spurious_irq_expected = false;
++		} else {
++			dev_warn(nfc->parent, "spurious interrupt\n");
++		}
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int
++ar934x_nfc_init_tail(struct mtd_info *mtd)
++{
++	struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
++	struct nand_chip *chip = &nfc->nand_chip;
++	u32 ctrl;
++	u32 t;
++	int err;
++
++	switch (mtd->oobsize) {
++	case 16:
++	case 64:
++	case 128:
++		ar934x_nfc_wr(nfc, AR934X_NFC_REG_SPARE_SIZE, mtd->oobsize);
++		break;
++
++	default:
++		dev_err(nfc->parent, "unsupported OOB size: %d bytes\n",
++			mtd->oobsize);
++		return -ENXIO;
++	}
++
++	ctrl = AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
++
++	switch (mtd->erasesize / mtd->writesize) {
++	case 32:
++		t = AR934X_NFC_CTRL_BLOCK_SIZE_32;
++		break;
++
++	case 64:
++		t = AR934X_NFC_CTRL_BLOCK_SIZE_64;
++		break;
++
++	case 128:
++		t = AR934X_NFC_CTRL_BLOCK_SIZE_128;
++		break;
++
++	case 256:
++		t = AR934X_NFC_CTRL_BLOCK_SIZE_256;
++		break;
++
++	default:
++		dev_err(nfc->parent, "unsupported block size: %u\n",
++			mtd->erasesize / mtd->writesize);
++		return -ENXIO;
++	}
++
++	ctrl |= t << AR934X_NFC_CTRL_BLOCK_SIZE_S;
++
++	switch (mtd->writesize) {
++	case 256:
++		nfc->small_page = 1;
++		t = AR934X_NFC_CTRL_PAGE_SIZE_256;
++		break;
++
++	case 512:
++		nfc->small_page = 1;
++		t = AR934X_NFC_CTRL_PAGE_SIZE_512;
++		break;
++
++	case 1024:
++		t = AR934X_NFC_CTRL_PAGE_SIZE_1024;
++		break;
++
++	case 2048:
++		t = AR934X_NFC_CTRL_PAGE_SIZE_2048;
++		break;
++
++	case 4096:
++		t = AR934X_NFC_CTRL_PAGE_SIZE_4096;
++		break;
++
++	case 8192:
++		t = AR934X_NFC_CTRL_PAGE_SIZE_8192;
++		break;
++
++	case 16384:
++		t = AR934X_NFC_CTRL_PAGE_SIZE_16384;
++		break;
++
++	default:
++		dev_err(nfc->parent, "unsupported write size: %d bytes\n",
++			mtd->writesize);
++		return -ENXIO;
++	}
++
++	ctrl |= t << AR934X_NFC_CTRL_PAGE_SIZE_S;
++
++	if (nfc->small_page) {
++		ctrl |= AR934X_NFC_CTRL_SMALL_PAGE;
++
++		if (chip->chipsize > (32 << 20)) {
++			nfc->addr_count0 = 4;
++			nfc->addr_count1 = 3;
++		} else if (chip->chipsize > (2 << 16)) {
++			nfc->addr_count0 = 3;
++			nfc->addr_count1 = 2;
++		} else {
++			nfc->addr_count0 = 2;
++			nfc->addr_count1 = 1;
++		}
++	} else {
++		if (chip->chipsize > (128 << 20)) {
++			nfc->addr_count0 = 5;
++			nfc->addr_count1 = 3;
++		} else if (chip->chipsize > (8 << 16)) {
++			nfc->addr_count0 = 4;
++			nfc->addr_count1 = 2;
++		} else {
++			nfc->addr_count0 = 3;
++			nfc->addr_count1 = 1;
++		}
++	}
++
++	ctrl |= nfc->addr_count0 << AR934X_NFC_CTRL_ADDR_CYCLE0_S;
++	ctrl |= nfc->addr_count1 << AR934X_NFC_CTRL_ADDR_CYCLE1_S;
++
++	nfc->ctrl_reg = ctrl;
++	ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
++
++	ar934x_nfc_free_buf(nfc);
++	err = ar934x_nfc_alloc_buf(nfc, mtd->writesize + mtd->oobsize);
++
++	return err;
++}
++
++static struct nand_ecclayout ar934x_nfc_oob_64_hwecc = {
++	.eccbytes = 28,
++	.eccpos = {
++		20, 21, 22, 23, 24, 25, 26,
++		27, 28, 29, 30, 31, 32, 33,
++		34, 35, 36, 37, 38, 39, 40,
++		41, 42, 43, 44, 45, 46, 47,
++	},
++	.oobfree = {
++		{
++			.offset = 4,
++			.length = 16,
++		},
++		{
++			.offset = 48,
++			.length = 16,
++		},
++	},
++};
++
++static int
++ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc)
++{
++	struct nand_chip *nand = &nfc->nand_chip;
++	u32 ecc_cap;
++	u32 ecc_thres;
++
++	if (!config_enabled(CONFIG_MTD_NAND_AR934X_HW_ECC)) {
++		dev_err(nfc->parent, "hardware ECC support is disabled\n");
++		return -EINVAL;
++	}
++
++	switch (nfc->mtd.writesize) {
++	case 2048:
++		/*
++		 * Writing a subpage separately is not supported, because
++		 * the controller only does ECC on full-page accesses.
++		 */
++		nand->options = NAND_NO_SUBPAGE_WRITE;
++
++		nand->ecc.size = 512;
++		nand->ecc.bytes = 7;
++		nand->ecc.strength = 4;
++		nand->ecc.layout = &ar934x_nfc_oob_64_hwecc;
++		break;
++
++	default:
++		dev_err(nfc->parent,
++			"hardware ECC is not available for %d byte pages\n",
++			nfc->mtd.writesize);
++		return -EINVAL;
++	}
++
++	BUG_ON(!nand->ecc.layout);
++
++	switch (nand->ecc.strength) {
++	case 4:
++		ecc_cap = AR934X_NFC_ECC_CTRL_ECC_CAP_4;
++		ecc_thres = 4;
++		break;
++
++	default:
++		dev_err(nfc->parent, "unsupported ECC strength %u\n",
++			nand->ecc.strength);
++		return -EINVAL;
++	}
++
++	nfc->ecc_thres = ecc_thres;
++	nfc->ecc_oob_pos = nand->ecc.layout->eccpos[0];
++
++	nfc->ecc_ctrl_reg = ecc_cap << AR934X_NFC_ECC_CTRL_ECC_CAP_S;
++	nfc->ecc_ctrl_reg |= ecc_thres << AR934X_NFC_ECC_CTRL_ERR_THRES_S;
++
++	nfc->ecc_offset_reg = nfc->mtd.writesize + nfc->ecc_oob_pos;
++
++	nand->ecc.mode = NAND_ECC_HW;
++	nand->ecc.read_page = ar934x_nfc_read_page;
++	nand->ecc.read_page_raw = ar934x_nfc_read_page_raw;
++	nand->ecc.write_page = ar934x_nfc_write_page;
++	nand->ecc.write_page_raw = ar934x_nfc_write_page_raw;
++	nand->ecc.read_oob = ar934x_nfc_read_oob;
++	nand->ecc.write_oob = ar934x_nfc_write_oob;
++
++	return 0;
++}
++
++static int
++ar934x_nfc_probe(struct platform_device *pdev)
++{
++	static const char *part_probes[] = { "cmdlinepart", NULL, };
++	struct ar934x_nfc_platform_data *pdata;
++	struct ar934x_nfc *nfc;
++	struct resource *res;
++	struct mtd_info *mtd;
++	struct nand_chip *nand;
++	struct mtd_part_parser_data ppdata;
++	int ret;
++
++	pdata = pdev->dev.platform_data;
++	if (pdata == NULL) {
++		dev_err(&pdev->dev, "no platform data defined\n");
++		return -EINVAL;
++	}
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(&pdev->dev, "failed to get I/O memory\n");
++		return -EINVAL;
++	}
++
++	nfc = devm_kzalloc(&pdev->dev, sizeof(struct ar934x_nfc), GFP_KERNEL);
++	if (!nfc) {
++		dev_err(&pdev->dev, "failed to allocate driver data\n");
++		return -ENOMEM;
++	}
++
++	nfc->base = devm_ioremap_resource(&pdev->dev, res);
++	if (IS_ERR(nfc->base)) {
++		dev_err(&pdev->dev, "failed to remap I/O memory\n");
++		return PTR_ERR(nfc->base);
++	}
++
++	nfc->irq = platform_get_irq(pdev, 0);
++	if (nfc->irq < 0) {
++		dev_err(&pdev->dev, "no IRQ resource specified\n");
++		return -EINVAL;
++	}
++
++	init_waitqueue_head(&nfc->irq_waitq);
++	ret = request_irq(nfc->irq, ar934x_nfc_irq_handler, 0,
++			  dev_name(&pdev->dev), nfc);
++	if (ret) {
++		dev_err(&pdev->dev, "requast_irq failed, err:%d\n", ret);
++		return ret;
++	}
++
++	nfc->parent = &pdev->dev;
++	nfc->select_chip = pdata->select_chip;
++	nfc->swap_dma = pdata->swap_dma;
++
++	nand = &nfc->nand_chip;
++	mtd = &nfc->mtd;
++
++	mtd->priv = nand;
++	mtd->owner = THIS_MODULE;
++	if (pdata->name)
++		mtd->name = pdata->name;
++	else
++		mtd->name = dev_name(&pdev->dev);
++
++	nand->chip_delay = 25;
++
++	nand->dev_ready = ar934x_nfc_dev_ready;
++	nand->cmdfunc = ar934x_nfc_cmdfunc;
++	nand->read_byte = ar934x_nfc_read_byte;
++	nand->write_buf = ar934x_nfc_write_buf;
++	nand->read_buf = ar934x_nfc_read_buf;
++	nand->select_chip = ar934x_nfc_select_chip;
++
++	ret = ar934x_nfc_alloc_buf(nfc, AR934X_NFC_ID_BUF_SIZE);
++	if (ret)
++		goto err_free_irq;
++
++	platform_set_drvdata(pdev, nfc);
++
++	ar934x_nfc_hw_init(nfc);
++
++	ret = nand_scan_ident(mtd, 1, NULL);
++	if (ret) {
++		dev_err(&pdev->dev, "nand_scan_ident failed, err:%d\n", ret);
++		goto err_free_buf;
++	}
++
++	ret = ar934x_nfc_init_tail(mtd);
++	if (ret) {
++		dev_err(&pdev->dev, "init tail failed, err:%d\n", ret);
++		goto err_free_buf;
++	}
++
++	if (pdata->scan_fixup) {
++		ret = pdata->scan_fixup(mtd);
++		if (ret)
++			goto err_free_buf;
++	}
++
++	switch (pdata->ecc_mode) {
++	case AR934X_NFC_ECC_SOFT:
++		nand->ecc.mode = NAND_ECC_SOFT;
++		break;
++
++	case AR934X_NFC_ECC_SOFT_BCH:
++		nand->ecc.mode = NAND_ECC_SOFT_BCH;
++		break;
++
++	case AR934X_NFC_ECC_HW:
++		ret = ar934x_nfc_setup_hwecc(nfc);
++		if (ret)
++			goto err_free_buf;
++
++		break;
++
++	default:
++		dev_err(nfc->parent, "unknown ECC mode %d\n", pdata->ecc_mode);
++		return -EINVAL;
++	}
++
++	ret = nand_scan_tail(mtd);
++	if (ret) {
++		dev_err(&pdev->dev, "scan tail failed, err:%d\n", ret);
++		goto err_free_buf;
++	}
++
++	memset(&ppdata, '\0', sizeof(ppdata));
++	ret = mtd_device_parse_register(mtd, part_probes, &ppdata,
++					pdata->parts, pdata->nr_parts);
++	if (ret) {
++		dev_err(&pdev->dev, "unable to register mtd, err:%d\n", ret);
++		goto err_free_buf;
++	}
++
++	return 0;
++
++err_free_buf:
++	ar934x_nfc_free_buf(nfc);
++err_free_irq:
++	free_irq(nfc->irq, nfc);
++	return ret;
++}
++
++static int
++ar934x_nfc_remove(struct platform_device *pdev)
++{
++	struct ar934x_nfc *nfc;
++
++	nfc = platform_get_drvdata(pdev);
++	if (nfc) {
++		nand_release(&nfc->mtd);
++		ar934x_nfc_free_buf(nfc);
++		free_irq(nfc->irq, nfc);
++	}
++
++	return 0;
++}
++
++static struct platform_driver ar934x_nfc_driver = {
++	.probe		= ar934x_nfc_probe,
++	.remove		= ar934x_nfc_remove,
++	.driver = {
++		.name	= AR934X_NFC_DRIVER_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++module_platform_driver(ar934x_nfc_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_DESCRIPTION("Atheros AR934x NAND Flash Controller driver");
++MODULE_ALIAS("platform:" AR934X_NFC_DRIVER_NAME);
+diff -Nur linux-4.1.13.orig/drivers/mtd/nand/Kconfig linux-4.1.13/drivers/mtd/nand/Kconfig
+--- linux-4.1.13.orig/drivers/mtd/nand/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/mtd/nand/Kconfig	2015-12-04 19:57:03.882110905 +0100
+@@ -530,4 +530,24 @@
+ 	help
+ 	  Enables support for NAND controller on Hisilicon SoC Hip04.
+ 
++config MTD_NAND_RB4XX
++	tristate "NAND flash driver for RouterBoard 4xx series"
++	depends on MTD_NAND && ATH79_MACH_RB4XX
++
++config MTD_NAND_RB750
++	tristate "NAND flash driver for the RouterBoard 750"
++	depends on MTD_NAND && ATH79_MACH_RB750
++
++config MTD_NAND_RB91X
++	tristate "NAND flash driver for the RouterBOARD 91x series"
++	depends on MTD_NAND && ATH79_MACH_RB91X
++
++config MTD_NAND_AR934X
++	tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
++	depends on (SOC_AR934X || SOC_QCA955X)
++
++config MTD_NAND_AR934X_HW_ECC
++	bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)"
++	depends on MTD_NAND_AR934X
++
+ endif # MTD_NAND
+diff -Nur linux-4.1.13.orig/drivers/mtd/nand/Makefile linux-4.1.13/drivers/mtd/nand/Makefile
+--- linux-4.1.13.orig/drivers/mtd/nand/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/mtd/nand/Makefile	2015-12-04 19:57:03.882110905 +0100
+@@ -13,6 +13,7 @@
+ obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
+ obj-$(CONFIG_MTD_NAND_DENALI_PCI)	+= denali_pci.o
+ obj-$(CONFIG_MTD_NAND_DENALI_DT)	+= denali_dt.o
++obj-$(CONFIG_MTD_NAND_AR934X)		+= ar934x_nfc.o
+ obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
+ obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
+ obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
+@@ -32,6 +33,9 @@
+ obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)		+= rb750_nand.o
++obj-$(CONFIG_MTD_NAND_RB91X)		+= rb91x_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
+diff -Nur linux-4.1.13.orig/drivers/mtd/nand/rb4xx_nand.c linux-4.1.13/drivers/mtd/nand/rb4xx_nand.c
+--- linux-4.1.13.orig/drivers/mtd/nand/rb4xx_nand.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/mtd/nand/rb4xx_nand.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,305 @@
++/*
++ *  NAND flash driver for the MikroTik RouterBoard 4xx series
++ *
++ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  This file was based on the driver for Linux 2.6.22 published by
++ *  MikroTik for their RouterBoard 4xx series devices.
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/rb4xx_cpld.h>
++
++#define DRV_NAME        "rb4xx-nand"
++#define DRV_VERSION     "0.2.0"
++#define DRV_DESC        "NAND flash driver for RouterBoard 4xx series"
++
++#define RB4XX_NAND_GPIO_READY	5
++#define RB4XX_NAND_GPIO_ALE	37
++#define RB4XX_NAND_GPIO_CLE	38
++#define RB4XX_NAND_GPIO_NCE	39
++
++struct rb4xx_nand_info {
++	struct nand_chip	chip;
++	struct mtd_info		mtd;
++};
++
++/*
++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
++ * will not be able to find the kernel that we load.
++ */
++static struct nand_ecclayout rb4xx_nand_ecclayout = {
++	.eccbytes	= 6,
++	.eccpos		= { 8, 9, 10, 13, 14, 15 },
++	.oobavail	= 9,
++	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static struct mtd_partition rb4xx_nand_partitions[] = {
++	{
++		.name	= "booter",
++		.offset	= 0,
++		.size	= (256 * 1024),
++		.mask_flags = MTD_WRITEABLE,
++	},
++	{
++		.name	= "kernel",
++		.offset	= (256 * 1024),
++		.size	= (4 * 1024 * 1024) - (256 * 1024),
++	},
++	{
++		.name	= "rootfs",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static int rb4xx_nand_dev_ready(struct mtd_info *mtd)
++{
++	return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY);
++}
++
++static void rb4xx_nand_write_cmd(unsigned char cmd)
++{
++	unsigned char data = cmd;
++	int err;
++
++	err = rb4xx_cpld_write(&data, 1);
++	if (err)
++		pr_err("rb4xx_nand: write cmd failed, err=%d\n", err);
++}
++
++static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
++				unsigned int ctrl)
++{
++	if (ctrl & NAND_CTRL_CHANGE) {
++		gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE,
++					(ctrl & NAND_CLE) ? 1 : 0);
++		gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE,
++					(ctrl & NAND_ALE) ? 1 : 0);
++		gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE,
++					(ctrl & NAND_NCE) ? 0 : 1);
++	}
++
++	if (cmd != NAND_CMD_NONE)
++		rb4xx_nand_write_cmd(cmd);
++}
++
++static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd)
++{
++	unsigned char data = 0;
++	int err;
++
++	err = rb4xx_cpld_read(&data, NULL, 1);
++	if (err) {
++		pr_err("rb4xx_nand: read data failed, err=%d\n", err);
++		data = 0xff;
++	}
++
++	return data;
++}
++
++static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf,
++				 int len)
++{
++	int err;
++
++	err = rb4xx_cpld_write(buf, len);
++	if (err)
++		pr_err("rb4xx_nand: write buf failed, err=%d\n", err);
++}
++
++static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf,
++				int len)
++{
++	int err;
++
++	err = rb4xx_cpld_read(buf, NULL, len);
++	if (err)
++		pr_err("rb4xx_nand: read buf failed, err=%d\n", err);
++}
++
++static int rb4xx_nand_probe(struct platform_device *pdev)
++{
++	struct rb4xx_nand_info	*info;
++	int ret;
++
++	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
++
++	ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY");
++	if (ret) {
++		dev_err(&pdev->dev, "unable to request gpio %d\n",
++			RB4XX_NAND_GPIO_READY);
++		goto err;
++	}
++
++	ret = gpio_direction_input(RB4XX_NAND_GPIO_READY);
++	if (ret) {
++		dev_err(&pdev->dev, "unable to set input mode on gpio %d\n",
++			RB4XX_NAND_GPIO_READY);
++		goto err_free_gpio_ready;
++	}
++
++	ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE");
++	if (ret) {
++		dev_err(&pdev->dev, "unable to request gpio %d\n",
++			RB4XX_NAND_GPIO_ALE);
++		goto err_free_gpio_ready;
++	}
++
++	ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0);
++	if (ret) {
++		dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
++			RB4XX_NAND_GPIO_ALE);
++		goto err_free_gpio_ale;
++	}
++
++	ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE");
++	if (ret) {
++		dev_err(&pdev->dev, "unable to request gpio %d\n",
++			RB4XX_NAND_GPIO_CLE);
++		goto err_free_gpio_ale;
++	}
++
++	ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0);
++	if (ret) {
++		dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
++			RB4XX_NAND_GPIO_CLE);
++		goto err_free_gpio_cle;
++	}
++
++	ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE");
++	if (ret) {
++		dev_err(&pdev->dev, "unable to request gpio %d\n",
++			RB4XX_NAND_GPIO_NCE);
++		goto err_free_gpio_cle;
++	}
++
++	ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1);
++	if (ret) {
++		dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
++			RB4XX_NAND_GPIO_ALE);
++		goto err_free_gpio_nce;
++	}
++
++	info = kzalloc(sizeof(*info), GFP_KERNEL);
++	if (!info) {
++		dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n");
++		ret = -ENOMEM;
++		goto err_free_gpio_nce;
++	}
++
++	info->chip.priv	= &info;
++	info->mtd.priv	= &info->chip;
++	info->mtd.owner	= THIS_MODULE;
++
++	info->chip.cmd_ctrl	= rb4xx_nand_cmd_ctrl;
++	info->chip.dev_ready	= rb4xx_nand_dev_ready;
++	info->chip.read_byte	= rb4xx_nand_read_byte;
++	info->chip.write_buf	= rb4xx_nand_write_buf;
++	info->chip.read_buf	= rb4xx_nand_read_buf;
++
++	info->chip.chip_delay	= 25;
++	info->chip.ecc.mode	= NAND_ECC_SOFT;
++
++	platform_set_drvdata(pdev, info);
++
++	ret = nand_scan_ident(&info->mtd, 1, NULL);
++	if (ret) {
++		ret = -ENXIO;
++		goto err_free_info;
++	}
++
++	if (info->mtd.writesize == 512)
++		info->chip.ecc.layout = &rb4xx_nand_ecclayout;
++
++	ret = nand_scan_tail(&info->mtd);
++	if (ret) {
++		return -ENXIO;
++		goto err_set_drvdata;
++	}
++
++	mtd_device_register(&info->mtd, rb4xx_nand_partitions,
++				ARRAY_SIZE(rb4xx_nand_partitions));
++	if (ret)
++		goto err_release_nand;
++
++	return 0;
++
++err_release_nand:
++	nand_release(&info->mtd);
++err_set_drvdata:
++	platform_set_drvdata(pdev, NULL);
++err_free_info:
++	kfree(info);
++err_free_gpio_nce:
++	gpio_free(RB4XX_NAND_GPIO_NCE);
++err_free_gpio_cle:
++	gpio_free(RB4XX_NAND_GPIO_CLE);
++err_free_gpio_ale:
++	gpio_free(RB4XX_NAND_GPIO_ALE);
++err_free_gpio_ready:
++	gpio_free(RB4XX_NAND_GPIO_READY);
++err:
++	return ret;
++}
++
++static int rb4xx_nand_remove(struct platform_device *pdev)
++{
++	struct rb4xx_nand_info *info = platform_get_drvdata(pdev);
++
++	nand_release(&info->mtd);
++	platform_set_drvdata(pdev, NULL);
++	kfree(info);
++	gpio_free(RB4XX_NAND_GPIO_NCE);
++	gpio_free(RB4XX_NAND_GPIO_CLE);
++	gpio_free(RB4XX_NAND_GPIO_ALE);
++	gpio_free(RB4XX_NAND_GPIO_READY);
++
++	return 0;
++}
++
++static struct platform_driver rb4xx_nand_driver = {
++	.probe	= rb4xx_nand_probe,
++	.remove	= rb4xx_nand_remove,
++	.driver	= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init rb4xx_nand_init(void)
++{
++	return platform_driver_register(&rb4xx_nand_driver);
++}
++
++static void __exit rb4xx_nand_exit(void)
++{
++	platform_driver_unregister(&rb4xx_nand_driver);
++}
++
++module_init(rb4xx_nand_init);
++module_exit(rb4xx_nand_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-4.1.13.orig/drivers/mtd/nand/rb750_nand.c linux-4.1.13/drivers/mtd/nand/rb750_nand.c
+--- linux-4.1.13.orig/drivers/mtd/nand/rb750_nand.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/mtd/nand/rb750_nand.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,354 @@
++/*
++ *  NAND flash driver for the MikroTik RouterBOARD 750
++ *
++ *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/slab.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/mach-rb750.h>
++
++#define DRV_NAME	"rb750-nand"
++#define DRV_VERSION	"0.1.0"
++#define DRV_DESC	"NAND flash driver for the RouterBOARD 750"
++
++#define RB750_NAND_IO0		BIT(RB750_GPIO_NAND_IO0)
++#define RB750_NAND_ALE		BIT(RB750_GPIO_NAND_ALE)
++#define RB750_NAND_CLE		BIT(RB750_GPIO_NAND_CLE)
++#define RB750_NAND_NRE		BIT(RB750_GPIO_NAND_NRE)
++#define RB750_NAND_NWE		BIT(RB750_GPIO_NAND_NWE)
++#define RB750_NAND_RDY		BIT(RB750_GPIO_NAND_RDY)
++
++#define RB750_NAND_DATA_SHIFT	1
++#define RB750_NAND_DATA_BITS	(0xff << RB750_NAND_DATA_SHIFT)
++#define RB750_NAND_INPUT_BITS	(RB750_NAND_DATA_BITS | RB750_NAND_RDY)
++#define RB750_NAND_OUTPUT_BITS	(RB750_NAND_ALE | RB750_NAND_CLE | \
++				 RB750_NAND_NRE | RB750_NAND_NWE)
++
++struct rb750_nand_info {
++	struct nand_chip	chip;
++	struct mtd_info		mtd;
++	struct rb7xx_nand_platform_data *pdata;
++};
++
++static inline struct rb750_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
++{
++	return container_of(mtd, struct rb750_nand_info, mtd);
++}
++
++/*
++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
++ * will not be able to find the kernel that we load.
++ */
++static struct nand_ecclayout rb750_nand_ecclayout = {
++	.eccbytes	= 6,
++	.eccpos		= { 8, 9, 10, 13, 14, 15 },
++	.oobavail	= 9,
++	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static struct mtd_partition rb750_nand_partitions[] = {
++	{
++		.name	= "booter",
++		.offset	= 0,
++		.size	= (256 * 1024),
++		.mask_flags = MTD_WRITEABLE,
++	}, {
++		.name	= "kernel",
++		.offset	= (256 * 1024),
++		.size	= (4 * 1024 * 1024) - (256 * 1024),
++	}, {
++		.name	= "rootfs",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static void rb750_nand_write(const u8 *buf, unsigned len)
++{
++	void __iomem *base = ath79_gpio_base;
++	u32 out;
++	u32 t;
++	unsigned i;
++
++	/* set data lines to output mode */
++	t = __raw_readl(base + AR71XX_GPIO_REG_OE);
++	__raw_writel(t | RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
++
++	out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
++	out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE);
++	for (i = 0; i != len; i++) {
++		u32 data;
++
++		data = buf[i];
++		data <<= RB750_NAND_DATA_SHIFT;
++		data |= out;
++		__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
++
++		__raw_writel(data | RB750_NAND_NWE, base + AR71XX_GPIO_REG_OUT);
++		/* flush write */
++		__raw_readl(base + AR71XX_GPIO_REG_OUT);
++	}
++
++	/* set data lines to input mode */
++	t = __raw_readl(base + AR71XX_GPIO_REG_OE);
++	__raw_writel(t & ~RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
++	/* flush write */
++	__raw_readl(base + AR71XX_GPIO_REG_OE);
++}
++
++static void rb750_nand_read(u8 *read_buf, unsigned len)
++{
++	void __iomem *base = ath79_gpio_base;
++	unsigned i;
++
++	for (i = 0; i < len; i++) {
++		u8 data;
++
++		/* activate RE line */
++		__raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_CLEAR);
++		/* flush write */
++		__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
++
++		/* read input lines */
++		data = __raw_readl(base + AR71XX_GPIO_REG_IN) >>
++		       RB750_NAND_DATA_SHIFT;
++
++		/* deactivate RE line */
++		__raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET);
++
++		read_buf[i] = data;
++	}
++}
++
++static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
++{
++	struct rb750_nand_info *rbinfo = mtd_to_rbinfo(mtd);
++	void __iomem *base = ath79_gpio_base;
++	u32 t;
++
++	if (chip >= 0) {
++		rbinfo->pdata->enable_pins();
++
++		/* set input mode for data lines */
++		t = __raw_readl(base + AR71XX_GPIO_REG_OE);
++		__raw_writel(t & ~RB750_NAND_INPUT_BITS,
++			     base + AR71XX_GPIO_REG_OE);
++
++		/* deactivate RE and WE lines */
++		__raw_writel(RB750_NAND_NRE | RB750_NAND_NWE,
++			     base + AR71XX_GPIO_REG_SET);
++		/* flush write */
++		(void) __raw_readl(base + AR71XX_GPIO_REG_SET);
++
++		/* activate CE line */
++		__raw_writel(rbinfo->pdata->nce_line,
++			     base + AR71XX_GPIO_REG_CLEAR);
++	} else {
++		/* deactivate CE line */
++		__raw_writel(rbinfo->pdata->nce_line,
++			     base + AR71XX_GPIO_REG_SET);
++		/* flush write */
++		(void) __raw_readl(base + AR71XX_GPIO_REG_SET);
++
++		t = __raw_readl(base + AR71XX_GPIO_REG_OE);
++		__raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY,
++			     base + AR71XX_GPIO_REG_OE);
++
++		rbinfo->pdata->disable_pins();
++	}
++}
++
++static int rb750_nand_dev_ready(struct mtd_info *mtd)
++{
++	void __iomem *base = ath79_gpio_base;
++
++	return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY);
++}
++
++static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
++				unsigned int ctrl)
++{
++	if (ctrl & NAND_CTRL_CHANGE) {
++		void __iomem *base = ath79_gpio_base;
++		u32 t;
++
++		t = __raw_readl(base + AR71XX_GPIO_REG_OUT);
++
++		t &= ~(RB750_NAND_CLE | RB750_NAND_ALE);
++		t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0;
++		t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0;
++
++		__raw_writel(t, base + AR71XX_GPIO_REG_OUT);
++		/* flush write */
++		__raw_readl(base + AR71XX_GPIO_REG_OUT);
++	}
++
++	if (cmd != NAND_CMD_NONE) {
++		u8 t = cmd;
++		rb750_nand_write(&t, 1);
++	}
++}
++
++static u8 rb750_nand_read_byte(struct mtd_info *mtd)
++{
++	u8 data = 0;
++	rb750_nand_read(&data, 1);
++	return data;
++}
++
++static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
++{
++	rb750_nand_read(buf, len);
++}
++
++static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
++{
++	rb750_nand_write(buf, len);
++}
++
++static void __init rb750_nand_gpio_init(struct rb750_nand_info *info)
++{
++	void __iomem *base = ath79_gpio_base;
++	u32 out;
++	u32 t;
++
++	out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
++
++	/* setup output levels */
++	__raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE,
++		     base + AR71XX_GPIO_REG_SET);
++
++	__raw_writel(RB750_NAND_ALE | RB750_NAND_CLE,
++		     base + AR71XX_GPIO_REG_CLEAR);
++
++	/* setup input lines */
++	t = __raw_readl(base + AR71XX_GPIO_REG_OE);
++	__raw_writel(t & ~(RB750_NAND_INPUT_BITS), base + AR71XX_GPIO_REG_OE);
++
++	/* setup output lines */
++	t = __raw_readl(base + AR71XX_GPIO_REG_OE);
++	t |= RB750_NAND_OUTPUT_BITS;
++	t |= info->pdata->nce_line;
++	__raw_writel(t, base + AR71XX_GPIO_REG_OE);
++
++	info->pdata->latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0);
++}
++
++static int rb750_nand_probe(struct platform_device *pdev)
++{
++	struct rb750_nand_info	*info;
++	struct rb7xx_nand_platform_data *pdata;
++	int ret;
++
++	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -EINVAL;
++
++	info = kzalloc(sizeof(*info), GFP_KERNEL);
++	if (!info)
++		return -ENOMEM;
++
++	info->chip.priv	= &info;
++	info->mtd.priv	= &info->chip;
++	info->mtd.owner	= THIS_MODULE;
++
++	info->chip.select_chip	= rb750_nand_select_chip;
++	info->chip.cmd_ctrl	= rb750_nand_cmd_ctrl;
++	info->chip.dev_ready	= rb750_nand_dev_ready;
++	info->chip.read_byte	= rb750_nand_read_byte;
++	info->chip.write_buf	= rb750_nand_write_buf;
++	info->chip.read_buf	= rb750_nand_read_buf;
++
++	info->chip.chip_delay	= 25;
++	info->chip.ecc.mode	= NAND_ECC_SOFT;
++
++	info->pdata = pdata;
++
++	platform_set_drvdata(pdev, info);
++
++	rb750_nand_gpio_init(info);
++
++	ret = nand_scan_ident(&info->mtd, 1, NULL);
++	if (ret) {
++		ret = -ENXIO;
++		goto err_free_info;
++	}
++
++	if (info->mtd.writesize == 512)
++		info->chip.ecc.layout = &rb750_nand_ecclayout;
++
++	ret = nand_scan_tail(&info->mtd);
++	if (ret) {
++		return -ENXIO;
++		goto err_set_drvdata;
++	}
++
++	ret = mtd_device_register(&info->mtd, rb750_nand_partitions,
++				 ARRAY_SIZE(rb750_nand_partitions));
++	if (ret)
++		goto err_release_nand;
++
++	return 0;
++
++err_release_nand:
++	nand_release(&info->mtd);
++err_set_drvdata:
++	platform_set_drvdata(pdev, NULL);
++err_free_info:
++	kfree(info);
++	return ret;
++}
++
++static int rb750_nand_remove(struct platform_device *pdev)
++{
++	struct rb750_nand_info *info = platform_get_drvdata(pdev);
++
++	nand_release(&info->mtd);
++	platform_set_drvdata(pdev, NULL);
++	kfree(info);
++
++	return 0;
++}
++
++static struct platform_driver rb750_nand_driver = {
++	.probe	= rb750_nand_probe,
++	.remove	= rb750_nand_remove,
++	.driver	= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init rb750_nand_init(void)
++{
++	return platform_driver_register(&rb750_nand_driver);
++}
++
++static void __exit rb750_nand_exit(void)
++{
++	platform_driver_unregister(&rb750_nand_driver);
++}
++
++module_init(rb750_nand_init);
++module_exit(rb750_nand_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-4.1.13.orig/drivers/mtd/nand/rb91x_nand.c linux-4.1.13/drivers/mtd/nand/rb91x_nand.c
+--- linux-4.1.13.orig/drivers/mtd/nand/rb91x_nand.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/mtd/nand/rb91x_nand.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,377 @@
++/*
++ *  NAND flash driver for the MikroTik RouterBOARD 91x series
++ *
++ *  Copyright (C) 2013-2014 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/slab.h>
++#include <linux/gpio.h>
++#include <linux/platform_data/rb91x_nand.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#define DRV_DESC	"NAND flash driver for the RouterBOARD 91x series"
++
++#define RB91X_NAND_NRWE		BIT(12)
++
++#define RB91X_NAND_DATA_BITS	(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) |\
++				 BIT(13) | BIT(14) | BIT(15))
++
++#define RB91X_NAND_INPUT_BITS	(RB91X_NAND_DATA_BITS | RB91X_NAND_RDY)
++#define RB91X_NAND_OUTPUT_BITS	(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE)
++
++#define RB91X_NAND_LOW_DATA_MASK	0x1f
++#define RB91X_NAND_HIGH_DATA_MASK	0xe0
++#define RB91X_NAND_HIGH_DATA_SHIFT	8
++
++struct rb91x_nand_info {
++	struct nand_chip chip;
++	struct mtd_info mtd;
++	struct device *dev;
++
++	int gpio_nce;
++	int gpio_ale;
++	int gpio_cle;
++	int gpio_rdy;
++	int gpio_read;
++	int gpio_nrw;
++	int gpio_nle;
++};
++
++static inline struct rb91x_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
++{
++	return container_of(mtd, struct rb91x_nand_info, mtd);
++}
++
++/*
++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
++ * will not be able to find the kernel that we load.
++ */
++static struct nand_ecclayout rb91x_nand_ecclayout = {
++	.eccbytes	= 6,
++	.eccpos		= { 8, 9, 10, 13, 14, 15 },
++	.oobavail	= 9,
++	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static struct mtd_partition rb91x_nand_partitions[] = {
++	{
++		.name	= "booter",
++		.offset	= 0,
++		.size	= (256 * 1024),
++		.mask_flags = MTD_WRITEABLE,
++	}, {
++		.name	= "kernel",
++		.offset	= (256 * 1024),
++		.size	= (4 * 1024 * 1024) - (256 * 1024),
++	}, {
++		.name	= "rootfs",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static void rb91x_nand_write(struct rb91x_nand_info *rbni,
++			     const u8 *buf,
++			     unsigned len)
++{
++	void __iomem *base = ath79_gpio_base;
++	u32 oe_reg;
++	u32 out_reg;
++	u32 out;
++	unsigned i;
++
++	/* enable the latch */
++	gpio_set_value_cansleep(rbni->gpio_nle, 0);
++
++	oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
++	out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
++
++	/* set data lines to output mode */
++	__raw_writel(oe_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE),
++		     base + AR71XX_GPIO_REG_OE);
++
++	out = out_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE);
++	for (i = 0; i != len; i++) {
++		u32 data;
++
++		data = (buf[i] & RB91X_NAND_HIGH_DATA_MASK) <<
++			RB91X_NAND_HIGH_DATA_SHIFT;
++		data |= buf[i] & RB91X_NAND_LOW_DATA_MASK;
++		data |= out;
++		__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
++
++		/* deactivate WE line */
++		data |= RB91X_NAND_NRWE;
++		__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
++		/* flush write */
++		__raw_readl(base + AR71XX_GPIO_REG_OUT);
++	}
++
++	/* restore  registers */
++	__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
++	__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
++	/* flush write */
++	__raw_readl(base + AR71XX_GPIO_REG_OUT);
++
++	/* disable the latch */
++	gpio_set_value_cansleep(rbni->gpio_nle, 1);
++}
++
++static void rb91x_nand_read(struct rb91x_nand_info *rbni,
++			    u8 *read_buf,
++			    unsigned len)
++{
++	void __iomem *base = ath79_gpio_base;
++	u32 oe_reg;
++	u32 out_reg;
++	unsigned i;
++
++	/* enable read mode */
++	gpio_set_value_cansleep(rbni->gpio_read, 1);
++
++	/* enable latch */
++	gpio_set_value_cansleep(rbni->gpio_nle, 0);
++
++	/* save registers */
++	oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
++	out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
++
++	/* set data lines to input mode */
++	__raw_writel(oe_reg | RB91X_NAND_DATA_BITS,
++		     base + AR71XX_GPIO_REG_OE);
++
++	for (i = 0; i < len; i++) {
++		u32 in;
++		u8 data;
++
++		/* activate RE line */
++		__raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_CLEAR);
++		/* flush write */
++		__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
++
++		/* read input lines */
++		in = __raw_readl(base + AR71XX_GPIO_REG_IN);
++
++		/* deactivate RE line */
++		__raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_SET);
++
++		data = (in & RB91X_NAND_LOW_DATA_MASK);
++		data |= (in >> RB91X_NAND_HIGH_DATA_SHIFT) &
++			RB91X_NAND_HIGH_DATA_MASK;
++
++		read_buf[i] = data;
++	}
++
++	/* restore  registers */
++	__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
++	__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
++	/* flush write */
++	__raw_readl(base + AR71XX_GPIO_REG_OUT);
++
++	/* disable latch */
++	gpio_set_value_cansleep(rbni->gpio_nle, 1);
++
++	/* disable read mode */
++	gpio_set_value_cansleep(rbni->gpio_read, 0);
++}
++
++static int rb91x_nand_dev_ready(struct mtd_info *mtd)
++{
++	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
++
++	return gpio_get_value_cansleep(rbni->gpio_rdy);
++}
++
++static void rb91x_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
++				unsigned int ctrl)
++{
++	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
++
++	if (ctrl & NAND_CTRL_CHANGE) {
++		gpio_set_value_cansleep(rbni->gpio_cle,
++					(ctrl & NAND_CLE) ? 1 : 0);
++		gpio_set_value_cansleep(rbni->gpio_ale,
++					(ctrl & NAND_ALE) ? 1 : 0);
++		gpio_set_value_cansleep(rbni->gpio_nce,
++					(ctrl & NAND_NCE) ? 0 : 1);
++	}
++
++	if (cmd != NAND_CMD_NONE) {
++		u8 t = cmd;
++
++		rb91x_nand_write(rbni, &t, 1);
++	}
++}
++
++static u8 rb91x_nand_read_byte(struct mtd_info *mtd)
++{
++	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
++	u8 data = 0xff;
++
++	rb91x_nand_read(rbni, &data, 1);
++
++	return data;
++}
++
++static void rb91x_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
++{
++	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
++
++	rb91x_nand_read(rbni, buf, len);
++}
++
++static void rb91x_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
++{
++	struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
++
++	rb91x_nand_write(rbni, buf, len);
++}
++
++static int rb91x_nand_gpio_init(struct rb91x_nand_info *info)
++{
++	int ret;
++
++	/*
++	 * Ensure that the LATCH is disabled before initializing
++	 * control lines.
++	 */
++	ret = devm_gpio_request_one(info->dev, info->gpio_nle,
++				    GPIOF_OUT_INIT_HIGH, "LATCH enable");
++	if (ret)
++		return ret;
++
++	ret = devm_gpio_request_one(info->dev, info->gpio_nce,
++				    GPIOF_OUT_INIT_HIGH, "NAND nCE");
++	if (ret)
++		return ret;
++
++	ret = devm_gpio_request_one(info->dev, info->gpio_nrw,
++				    GPIOF_OUT_INIT_HIGH, "NAND nRW");
++	if (ret)
++		return ret;
++
++	ret = devm_gpio_request_one(info->dev, info->gpio_cle,
++				    GPIOF_OUT_INIT_LOW, "NAND CLE");
++	if (ret)
++		return ret;
++
++	ret = devm_gpio_request_one(info->dev, info->gpio_ale,
++				    GPIOF_OUT_INIT_LOW, "NAND ALE");
++	if (ret)
++		return ret;
++
++	ret = devm_gpio_request_one(info->dev, info->gpio_read,
++				    GPIOF_OUT_INIT_LOW, "NAND READ");
++	if (ret)
++		return ret;
++
++	ret = devm_gpio_request_one(info->dev, info->gpio_rdy,
++				    GPIOF_IN, "NAND RDY");
++	return ret;
++}
++
++static int rb91x_nand_probe(struct platform_device *pdev)
++{
++	struct rb91x_nand_info	*rbni;
++	struct rb91x_nand_platform_data *pdata;
++	int ret;
++
++	pr_info(DRV_DESC "\n");
++
++	pdata = dev_get_platdata(&pdev->dev);
++	if (!pdata)
++		return -EINVAL;
++
++	rbni = devm_kzalloc(&pdev->dev, sizeof(*rbni), GFP_KERNEL);
++	if (!rbni)
++		return -ENOMEM;
++
++	rbni->dev = &pdev->dev;
++	rbni->gpio_nce = pdata->gpio_nce;
++	rbni->gpio_ale = pdata->gpio_ale;
++	rbni->gpio_cle = pdata->gpio_cle;
++	rbni->gpio_read = pdata->gpio_read;
++	rbni->gpio_nrw = pdata->gpio_nrw;
++	rbni->gpio_rdy = pdata->gpio_rdy;
++	rbni->gpio_nle = pdata->gpio_nle;
++
++	rbni->chip.priv	= &rbni;
++	rbni->mtd.priv	= &rbni->chip;
++	rbni->mtd.owner	= THIS_MODULE;
++
++	rbni->chip.cmd_ctrl	= rb91x_nand_cmd_ctrl;
++	rbni->chip.dev_ready	= rb91x_nand_dev_ready;
++	rbni->chip.read_byte	= rb91x_nand_read_byte;
++	rbni->chip.write_buf	= rb91x_nand_write_buf;
++	rbni->chip.read_buf	= rb91x_nand_read_buf;
++
++	rbni->chip.chip_delay	= 25;
++	rbni->chip.ecc.mode	= NAND_ECC_SOFT;
++
++	platform_set_drvdata(pdev, rbni);
++
++	ret = rb91x_nand_gpio_init(rbni);
++	if (ret)
++		return ret;
++
++	ret = nand_scan_ident(&rbni->mtd, 1, NULL);
++	if (ret)
++		return ret;
++
++	if (rbni->mtd.writesize == 512)
++		rbni->chip.ecc.layout = &rb91x_nand_ecclayout;
++
++	ret = nand_scan_tail(&rbni->mtd);
++	if (ret)
++		return ret;
++
++	ret = mtd_device_register(&rbni->mtd, rb91x_nand_partitions,
++				 ARRAY_SIZE(rb91x_nand_partitions));
++	if (ret)
++		goto err_release_nand;
++
++	return 0;
++
++err_release_nand:
++	nand_release(&rbni->mtd);
++	return ret;
++}
++
++static int rb91x_nand_remove(struct platform_device *pdev)
++{
++	struct rb91x_nand_info *info = platform_get_drvdata(pdev);
++
++	nand_release(&info->mtd);
++
++	return 0;
++}
++
++static struct platform_driver rb91x_nand_driver = {
++	.probe	= rb91x_nand_probe,
++	.remove	= rb91x_nand_remove,
++	.driver	= {
++		.name	= RB91X_NAND_DRIVER_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++module_platform_driver(rb91x_nand_driver);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-4.1.13.orig/drivers/mtd/redboot.c linux-4.1.13/drivers/mtd/redboot.c
+--- linux-4.1.13.orig/drivers/mtd/redboot.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/mtd/redboot.c	2015-12-04 19:57:03.870111690 +0100
+@@ -76,12 +76,18 @@
+ 	static char nullstring[] = "unallocated";
+ #endif
+ 
++	buf = vmalloc(master->erasesize);
++	if (!buf)
++		return -ENOMEM;
++
++ restart:
+ 	if ( directory < 0 ) {
+ 		offset = master->size + directory * master->erasesize;
+ 		while (mtd_block_isbad(master, offset)) {
+ 			if (!offset) {
+ 			nogood:
+ 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++				vfree(buf);
+ 				return -EIO;
+ 			}
+ 			offset -= master->erasesize;
+@@ -94,10 +100,6 @@
+ 				goto nogood;
+ 		}
+ 	}
+-	buf = vmalloc(master->erasesize);
+-
+-	if (!buf)
+-		return -ENOMEM;
+ 
+ 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ 	       master->name, offset);
+@@ -170,6 +172,11 @@
+ 	}
+ 	if (i == numslots) {
+ 		/* Didn't find it */
++		if (offset + master->erasesize < master->size) {
++			/* not at the end of the flash yet, maybe next block :) */
++			directory++;
++			goto restart;
++		}
+ 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ 		       master->name);
+ 		ret = 0;
+diff -Nur linux-4.1.13.orig/drivers/mtd/tplinkpart.c linux-4.1.13/drivers/mtd/tplinkpart.c
+--- linux-4.1.13.orig/drivers/mtd/tplinkpart.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/mtd/tplinkpart.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,222 @@
++/*
++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/magic.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#define TPLINK_NUM_PARTS	5
++#define TPLINK_HEADER_V1	0x01000000
++#define TPLINK_HEADER_V2	0x02000000
++#define MD5SUM_LEN		16
++
++#define TPLINK_ART_LEN		0x10000
++#define TPLINK_KERNEL_OFFS	0x20000
++#define TPLINK_64K_KERNEL_OFFS	0x10000
++
++struct tplink_fw_header {
++	uint32_t	version;	/* header version */
++	char		vendor_name[24];
++	char		fw_version[36];
++	uint32_t	hw_id;		/* hardware id */
++	uint32_t	hw_rev;		/* hardware revision */
++	uint32_t	unk1;
++	uint8_t		md5sum1[MD5SUM_LEN];
++	uint32_t	unk2;
++	uint8_t		md5sum2[MD5SUM_LEN];
++	uint32_t	unk3;
++	uint32_t	kernel_la;	/* kernel load address */
++	uint32_t	kernel_ep;	/* kernel entry point */
++	uint32_t	fw_length;	/* total length of the firmware */
++	uint32_t	kernel_ofs;	/* kernel data offset */
++	uint32_t	kernel_len;	/* kernel data length */
++	uint32_t	rootfs_ofs;	/* rootfs data offset */
++	uint32_t	rootfs_len;	/* rootfs data length */
++	uint32_t	boot_ofs;	/* bootloader data offset */
++	uint32_t	boot_len;	/* bootloader data length */
++	uint8_t		pad[360];
++} __attribute__ ((packed));
++
++static struct tplink_fw_header *
++tplink_read_header(struct mtd_info *mtd, size_t offset)
++{
++	struct tplink_fw_header *header;
++	size_t header_len;
++	size_t retlen;
++	int ret;
++	u32 t;
++
++	header = vmalloc(sizeof(*header));
++	if (!header)
++		goto err;
++
++	header_len = sizeof(struct tplink_fw_header);
++	ret = mtd_read(mtd, offset, header_len, &retlen,
++		       (unsigned char *) header);
++	if (ret)
++		goto err_free_header;
++
++	if (retlen != header_len)
++		goto err_free_header;
++
++	/* sanity checks */
++	t = be32_to_cpu(header->version);
++	if ((t != TPLINK_HEADER_V1) && (t != TPLINK_HEADER_V2))
++		goto err_free_header;
++
++	t = be32_to_cpu(header->kernel_ofs);
++	if (t != header_len)
++		goto err_free_header;
++
++	return header;
++
++err_free_header:
++	vfree(header);
++err:
++	return NULL;
++}
++
++static int tplink_check_rootfs_magic(struct mtd_info *mtd, size_t offset)
++{
++	u32 magic;
++	size_t retlen;
++	int ret;
++
++	ret = mtd_read(mtd, offset, sizeof(magic), &retlen,
++		       (unsigned char *) &magic);
++	if (ret)
++		return ret;
++
++	if (retlen != sizeof(magic))
++		return -EIO;
++
++	if (le32_to_cpu(magic) != SQUASHFS_MAGIC &&
++	    magic != 0x19852003)
++		return -EINVAL;
++
++	return 0;
++}
++
++static int tplink_parse_partitions_offset(struct mtd_info *master,
++				   struct mtd_partition **pparts,
++				   struct mtd_part_parser_data *data,
++				   size_t offset)
++{
++	struct mtd_partition *parts;
++	struct tplink_fw_header *header;
++	int nr_parts;
++	size_t art_offset;
++	size_t rootfs_offset;
++	size_t squashfs_offset;
++	int ret;
++
++	nr_parts = TPLINK_NUM_PARTS;
++	parts = kzalloc(nr_parts * sizeof(struct mtd_partition), GFP_KERNEL);
++	if (!parts) {
++		ret = -ENOMEM;
++		goto err;
++	}
++
++	header = tplink_read_header(master, offset);
++	if (!header) {
++		pr_notice("%s: no TP-Link header found\n", master->name);
++		ret = -ENODEV;
++		goto err_free_parts;
++	}
++
++	squashfs_offset = offset + sizeof(struct tplink_fw_header) +
++			  be32_to_cpu(header->kernel_len);
++
++	ret = tplink_check_rootfs_magic(master, squashfs_offset);
++	if (ret == 0)
++		rootfs_offset = squashfs_offset;
++	else
++		rootfs_offset = offset + be32_to_cpu(header->rootfs_ofs);
++
++	art_offset = master->size - TPLINK_ART_LEN;
++
++	parts[0].name = "u-boot";
++	parts[0].offset = 0;
++	parts[0].size = offset;
++	parts[0].mask_flags = MTD_WRITEABLE;
++
++	parts[1].name = "kernel";
++	parts[1].offset = offset;
++	parts[1].size = rootfs_offset - offset;
++
++	parts[2].name = "rootfs";
++	parts[2].offset = rootfs_offset;
++	parts[2].size = art_offset - rootfs_offset;
++
++	parts[3].name = "art";
++	parts[3].offset = art_offset;
++	parts[3].size = TPLINK_ART_LEN;
++	parts[3].mask_flags = MTD_WRITEABLE;
++
++	parts[4].name = "firmware";
++	parts[4].offset = offset;
++	parts[4].size = art_offset - offset;
++
++	vfree(header);
++
++	*pparts = parts;
++	return nr_parts;
++
++err_free_parts:
++	kfree(parts);
++err:
++	*pparts = NULL;
++	return ret;
++}
++
++static int tplink_parse_partitions(struct mtd_info *master,
++				   struct mtd_partition **pparts,
++				   struct mtd_part_parser_data *data)
++{
++	return tplink_parse_partitions_offset(master, pparts, data,
++		                              TPLINK_KERNEL_OFFS);
++}
++
++static int tplink_parse_64k_partitions(struct mtd_info *master,
++				   struct mtd_partition **pparts,
++				   struct mtd_part_parser_data *data)
++{
++	return tplink_parse_partitions_offset(master, pparts, data,
++		                              TPLINK_64K_KERNEL_OFFS);
++}
++
++static struct mtd_part_parser tplink_parser = {
++	.owner		= THIS_MODULE,
++	.parse_fn	= tplink_parse_partitions,
++	.name		= "tp-link",
++};
++
++static struct mtd_part_parser tplink_64k_parser = {
++	.owner		= THIS_MODULE,
++	.parse_fn	= tplink_parse_64k_partitions,
++	.name		= "tp-link-64k",
++};
++
++static int __init tplink_parser_init(void)
++{
++	register_mtd_parser(&tplink_parser);
++	register_mtd_parser(&tplink_64k_parser);
++
++	return 0;
++}
++
++module_init(tplink_parser_init);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+diff -Nur linux-4.1.13.orig/drivers/net/dsa/Kconfig linux-4.1.13/drivers/net/dsa/Kconfig
+--- linux-4.1.13.orig/drivers/net/dsa/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/net/dsa/Kconfig	2015-12-04 19:57:03.886110643 +0100
+@@ -13,6 +13,13 @@
+ 	  This enables support for the Marvell 88E6060 ethernet switch
+ 	  chip.
+ 
++config NET_DSA_MV88E6063
++	bool "Marvell 88E6063 ethernet switch chip support"
++	select NET_DSA_TAG_TRAILER
++	---help---
++	  This enables support for the Marvell 88E6063 ethernet switch
++	  chip
++
+ config NET_DSA_MV88E6XXX_NEED_PPU
+ 	bool
+ 	default n
+diff -Nur linux-4.1.13.orig/drivers/net/dsa/Makefile linux-4.1.13/drivers/net/dsa/Makefile
+--- linux-4.1.13.orig/drivers/net/dsa/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/net/dsa/Makefile	2015-12-04 19:57:03.886110643 +0100
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
+ mv88e6xxx_drv-y += mv88e6xxx.o
+ ifdef CONFIG_NET_DSA_MV88E6123_61_65
+diff -Nur linux-4.1.13.orig/drivers/net/dsa/mv88e6063.c linux-4.1.13/drivers/net/dsa/mv88e6063.c
+--- linux-4.1.13.orig/drivers/net/dsa/mv88e6063.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/dsa/mv88e6063.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,311 @@
++/*
++ * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
++ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This driver was base on: net/dsa/mv88e6060.c
++ *   net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
++ *   Copyright (c) 2008-2009 Marvell Semiconductor
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/version.h>
++#include <linux/list.h>
++#include <linux/netdevice.h>
++#include <linux/phy.h>
++#include <net/dsa.h>
++
++#define REG_BASE		0x10
++#define REG_PHY(p)		(REG_BASE + (p))
++#define REG_PORT(p)		(REG_BASE + 8 + (p))
++#define REG_GLOBAL		(REG_BASE + 0x0f)
++#define NUM_PORTS		7
++
++static int reg_read(struct dsa_switch *ds, int addr, int reg)
++{
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)
++	return mdiobus_read(ds->master_mii_bus, addr, reg);
++#else
++	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
++	return mdiobus_read(bus, addr, reg);
++#endif
++}
++
++#define REG_READ(addr, reg)					\
++	({							\
++		int __ret;					\
++								\
++		__ret = reg_read(ds, addr, reg);		\
++		if (__ret < 0)					\
++			return __ret;				\
++		__ret;						\
++	})
++
++
++static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
++{
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)
++	return mdiobus_write(ds->master_mii_bus, addr, reg, val);
++#else
++	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
++	return mdiobus_write(bus, addr, reg, val);
++#endif
++}
++
++#define REG_WRITE(addr, reg, val)				\
++	({							\
++		int __ret;					\
++								\
++		__ret = reg_write(ds, addr, reg, val);		\
++		if (__ret < 0)					\
++			return __ret;				\
++	})
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)
++static char *mv88e6063_probe(struct mii_bus *bus, int sw_addr)
++{
++#else
++static char *mv88e6063_probe(struct device *host_dev, int sw_addr)
++{
++	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
++#endif
++	int ret;
++
++	ret = mdiobus_read(bus, REG_PORT(0), 0x03);
++	if (ret >= 0) {
++		ret &= 0xfff0;
++		if (ret == 0x1530)
++			return "Marvell 88E6063";
++	}
++
++	return NULL;
++}
++
++static int mv88e6063_switch_reset(struct dsa_switch *ds)
++{
++	int i;
++	int ret;
++
++	/*
++	 * Set all ports to the disabled state.
++	 */
++	for (i = 0; i < NUM_PORTS; i++) {
++		ret = REG_READ(REG_PORT(i), 0x04);
++		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
++	}
++
++	/*
++	 * Wait for transmit queues to drain.
++	 */
++	msleep(2);
++
++	/*
++	 * Reset the switch.
++	 */
++	REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
++
++	/*
++	 * Wait up to one second for reset to complete.
++	 */
++	for (i = 0; i < 1000; i++) {
++		ret = REG_READ(REG_GLOBAL, 0x00);
++		if ((ret & 0x8000) == 0x0000)
++			break;
++
++		msleep(1);
++	}
++	if (i == 1000)
++		return -ETIMEDOUT;
++
++	return 0;
++}
++
++static int mv88e6063_setup_global(struct dsa_switch *ds)
++{
++	/*
++	 * Disable discarding of frames with excessive collisions,
++	 * set the maximum frame size to 1536 bytes, and mask all
++	 * interrupt sources.
++	 */
++	REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
++
++	/*
++	 * Enable automatic address learning, set the address
++	 * database size to 1024 entries, and set the default aging
++	 * time to 5 minutes.
++	 */
++	REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
++
++	return 0;
++}
++
++static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
++{
++	int addr = REG_PORT(p);
++
++	/*
++	 * Do not force flow control, disable Ingress and Egress
++	 * Header tagging, disable VLAN tunneling, and set the port
++	 * state to Forwarding.  Additionally, if this is the CPU
++	 * port, enable Ingress and Egress Trailer tagging mode.
++	 */
++	REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);
++
++	/*
++	 * Port based VLAN map: give each port its own address
++	 * database, allow the CPU port to talk to each of the 'real'
++	 * ports, and allow each of the 'real' ports to only talk to
++	 * the CPU port.
++	 */
++	REG_WRITE(addr, 0x06,
++			((p & 0xf) << 12) |
++			 (dsa_is_cpu_port(ds, p) ?
++				ds->phys_port_mask :
++				(1 << ds->dst->cpu_port)));
++
++	/*
++	 * Port Association Vector: when learning source addresses
++	 * of packets, add the address to the address database using
++	 * a port bitmap that has only the bit for this port set and
++	 * the other bits clear.
++	 */
++	REG_WRITE(addr, 0x0b, 1 << p);
++
++	return 0;
++}
++
++static int mv88e6063_setup(struct dsa_switch *ds)
++{
++	int i;
++	int ret;
++
++	ret = mv88e6063_switch_reset(ds);
++	if (ret < 0)
++		return ret;
++
++	/* @@@ initialise atu */
++
++	ret = mv88e6063_setup_global(ds);
++	if (ret < 0)
++		return ret;
++
++	for (i = 0; i < NUM_PORTS; i++) {
++		ret = mv88e6063_setup_port(ds, i);
++		if (ret < 0)
++			return ret;
++	}
++
++	return 0;
++}
++
++static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
++{
++	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
++	REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
++	REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
++
++	return 0;
++}
++
++static int mv88e6063_port_to_phy_addr(int port)
++{
++	if (port >= 0 && port <= NUM_PORTS)
++		return REG_PHY(port);
++	return -1;
++}
++
++static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
++{
++	int addr;
++
++	addr = mv88e6063_port_to_phy_addr(port);
++	if (addr == -1)
++		return 0xffff;
++
++	return reg_read(ds, addr, regnum);
++}
++
++static int
++mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
++{
++	int addr;
++
++	addr = mv88e6063_port_to_phy_addr(port);
++	if (addr == -1)
++		return 0xffff;
++
++	return reg_write(ds, addr, regnum, val);
++}
++
++static void mv88e6063_poll_link(struct dsa_switch *ds)
++{
++	int i;
++
++	for (i = 0; i < DSA_MAX_PORTS; i++) {
++		struct net_device *dev;
++		int uninitialized_var(port_status);
++		int link;
++		int speed;
++		int duplex;
++		int fc;
++
++		dev = ds->ports[i];
++		if (dev == NULL)
++			continue;
++
++		link = 0;
++		if (dev->flags & IFF_UP) {
++			port_status = reg_read(ds, REG_PORT(i), 0x00);
++			if (port_status < 0)
++				continue;
++
++			link = !!(port_status & 0x1000);
++		}
++
++		if (!link) {
++			if (netif_carrier_ok(dev)) {
++				printk(KERN_INFO "%s: link down\n", dev->name);
++				netif_carrier_off(dev);
++			}
++			continue;
++		}
++
++		speed = (port_status & 0x0100) ? 100 : 10;
++		duplex = (port_status & 0x0200) ? 1 : 0;
++		fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
++
++		if (!netif_carrier_ok(dev)) {
++			printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
++					 "flow control %sabled\n", dev->name,
++					 speed, duplex ? "full" : "half",
++					 fc ? "en" : "dis");
++			netif_carrier_on(dev);
++		}
++	}
++}
++
++static struct dsa_switch_driver mv88e6063_switch_driver = {
++	.tag_protocol	= htons(ETH_P_TRAILER),
++	.probe		= mv88e6063_probe,
++	.setup		= mv88e6063_setup,
++	.set_addr	= mv88e6063_set_addr,
++	.phy_read	= mv88e6063_phy_read,
++	.phy_write	= mv88e6063_phy_write,
++	.poll_link	= mv88e6063_poll_link,
++};
++
++static int __init mv88e6063_init(void)
++{
++	register_switch_driver(&mv88e6063_switch_driver);
++	return 0;
++}
++module_init(mv88e6063_init);
++
++static void __exit mv88e6063_cleanup(void)
++{
++	unregister_switch_driver(&mv88e6063_switch_driver);
++}
++module_exit(mv88e6063_cleanup);
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,1229 @@
++/*
++ *  Driver for the built-in ethernet switch of the Atheros AR7240 SoC
++ *  Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (c) 2010 Felix Fietkau <nbd@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#include <linux/etherdevice.h>
++#include <linux/list.h>
++#include <linux/netdevice.h>
++#include <linux/phy.h>
++#include <linux/mii.h>
++#include <linux/bitops.h>
++#include <linux/switch.h>
++#include "ag71xx.h"
++
++#define BITM(_count)	(BIT(_count) - 1)
++#define BITS(_shift, _count)	(BITM(_count) << _shift)
++
++#define AR7240_REG_MASK_CTRL		0x00
++#define AR7240_MASK_CTRL_REVISION_M	BITM(8)
++#define AR7240_MASK_CTRL_VERSION_M	BITM(8)
++#define AR7240_MASK_CTRL_VERSION_S	8
++#define   AR7240_MASK_CTRL_VERSION_AR7240 0x01
++#define   AR7240_MASK_CTRL_VERSION_AR934X 0x02
++#define AR7240_MASK_CTRL_SOFT_RESET	BIT(31)
++
++#define AR7240_REG_MAC_ADDR0		0x20
++#define AR7240_REG_MAC_ADDR1		0x24
++
++#define AR7240_REG_FLOOD_MASK		0x2c
++#define AR7240_FLOOD_MASK_BROAD_TO_CPU	BIT(26)
++
++#define AR7240_REG_GLOBAL_CTRL		0x30
++#define AR7240_GLOBAL_CTRL_MTU_M	BITM(11)
++#define AR9340_GLOBAL_CTRL_MTU_M	BITM(14)
++
++#define AR7240_REG_VTU			0x0040
++#define   AR7240_VTU_OP			BITM(3)
++#define   AR7240_VTU_OP_NOOP		0x0
++#define   AR7240_VTU_OP_FLUSH		0x1
++#define   AR7240_VTU_OP_LOAD		0x2
++#define   AR7240_VTU_OP_PURGE		0x3
++#define   AR7240_VTU_OP_REMOVE_PORT	0x4
++#define   AR7240_VTU_ACTIVE		BIT(3)
++#define   AR7240_VTU_FULL		BIT(4)
++#define   AR7240_VTU_PORT		BITS(8, 4)
++#define   AR7240_VTU_PORT_S		8
++#define   AR7240_VTU_VID		BITS(16, 12)
++#define   AR7240_VTU_VID_S		16
++#define   AR7240_VTU_PRIO		BITS(28, 3)
++#define   AR7240_VTU_PRIO_S		28
++#define   AR7240_VTU_PRIO_EN		BIT(31)
++
++#define AR7240_REG_VTU_DATA		0x0044
++#define   AR7240_VTUDATA_MEMBER		BITS(0, 10)
++#define   AR7240_VTUDATA_VALID		BIT(11)
++
++#define AR7240_REG_ATU			0x50
++#define AR7240_ATU_FLUSH_ALL		0x1
++
++#define AR7240_REG_AT_CTRL		0x5c
++#define AR7240_AT_CTRL_AGE_TIME		BITS(0, 15)
++#define AR7240_AT_CTRL_AGE_EN		BIT(17)
++#define AR7240_AT_CTRL_LEARN_CHANGE	BIT(18)
++#define AR7240_AT_CTRL_RESERVED		BIT(19)
++#define AR7240_AT_CTRL_ARP_EN		BIT(20)
++
++#define AR7240_REG_TAG_PRIORITY		0x70
++
++#define AR7240_REG_SERVICE_TAG		0x74
++#define AR7240_SERVICE_TAG_M		BITM(16)
++
++#define AR7240_REG_CPU_PORT		0x78
++#define AR7240_MIRROR_PORT_S		4
++#define AR7240_CPU_PORT_EN		BIT(8)
++
++#define AR7240_REG_MIB_FUNCTION0	0x80
++#define AR7240_MIB_TIMER_M		BITM(16)
++#define AR7240_MIB_AT_HALF_EN		BIT(16)
++#define AR7240_MIB_BUSY			BIT(17)
++#define AR7240_MIB_FUNC_S		24
++#define AR7240_MIB_FUNC_M		BITM(3)
++#define AR7240_MIB_FUNC_NO_OP		0x0
++#define AR7240_MIB_FUNC_FLUSH		0x1
++#define AR7240_MIB_FUNC_CAPTURE		0x3
++
++#define AR7240_REG_MDIO_CTRL		0x98
++#define AR7240_MDIO_CTRL_DATA_M		BITM(16)
++#define AR7240_MDIO_CTRL_REG_ADDR_S	16
++#define AR7240_MDIO_CTRL_PHY_ADDR_S	21
++#define AR7240_MDIO_CTRL_CMD_WRITE	0
++#define AR7240_MDIO_CTRL_CMD_READ	BIT(27)
++#define AR7240_MDIO_CTRL_MASTER_EN	BIT(30)
++#define AR7240_MDIO_CTRL_BUSY		BIT(31)
++
++#define AR7240_REG_PORT_BASE(_port)	(0x100 + (_port) * 0x100)
++
++#define AR7240_REG_PORT_STATUS(_port)	(AR7240_REG_PORT_BASE((_port)) + 0x00)
++#define AR7240_PORT_STATUS_SPEED_S	0
++#define AR7240_PORT_STATUS_SPEED_M	BITM(2)
++#define AR7240_PORT_STATUS_SPEED_10	0
++#define AR7240_PORT_STATUS_SPEED_100	1
++#define AR7240_PORT_STATUS_SPEED_1000	2
++#define AR7240_PORT_STATUS_TXMAC	BIT(2)
++#define AR7240_PORT_STATUS_RXMAC	BIT(3)
++#define AR7240_PORT_STATUS_TXFLOW	BIT(4)
++#define AR7240_PORT_STATUS_RXFLOW	BIT(5)
++#define AR7240_PORT_STATUS_DUPLEX	BIT(6)
++#define AR7240_PORT_STATUS_LINK_UP	BIT(8)
++#define AR7240_PORT_STATUS_LINK_AUTO	BIT(9)
++#define AR7240_PORT_STATUS_LINK_PAUSE	BIT(10)
++
++#define AR7240_REG_PORT_CTRL(_port)	(AR7240_REG_PORT_BASE((_port)) + 0x04)
++#define AR7240_PORT_CTRL_STATE_M	BITM(3)
++#define	AR7240_PORT_CTRL_STATE_DISABLED	0
++#define AR7240_PORT_CTRL_STATE_BLOCK	1
++#define AR7240_PORT_CTRL_STATE_LISTEN	2
++#define AR7240_PORT_CTRL_STATE_LEARN	3
++#define AR7240_PORT_CTRL_STATE_FORWARD	4
++#define AR7240_PORT_CTRL_LEARN_LOCK	BIT(7)
++#define AR7240_PORT_CTRL_VLAN_MODE_S	8
++#define AR7240_PORT_CTRL_VLAN_MODE_KEEP	0
++#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1
++#define AR7240_PORT_CTRL_VLAN_MODE_ADD	2
++#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3
++#define AR7240_PORT_CTRL_IGMP_SNOOP	BIT(10)
++#define AR7240_PORT_CTRL_HEADER		BIT(11)
++#define AR7240_PORT_CTRL_MAC_LOOP	BIT(12)
++#define AR7240_PORT_CTRL_SINGLE_VLAN	BIT(13)
++#define AR7240_PORT_CTRL_LEARN		BIT(14)
++#define AR7240_PORT_CTRL_DOUBLE_TAG	BIT(15)
++#define AR7240_PORT_CTRL_MIRROR_TX	BIT(16)
++#define AR7240_PORT_CTRL_MIRROR_RX	BIT(17)
++
++#define AR7240_REG_PORT_VLAN(_port)	(AR7240_REG_PORT_BASE((_port)) + 0x08)
++
++#define AR7240_PORT_VLAN_DEFAULT_ID_S	0
++#define AR7240_PORT_VLAN_DEST_PORTS_S	16
++#define AR7240_PORT_VLAN_MODE_S		30
++#define AR7240_PORT_VLAN_MODE_PORT_ONLY	0
++#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK	1
++#define AR7240_PORT_VLAN_MODE_VLAN_ONLY	2
++#define AR7240_PORT_VLAN_MODE_SECURE	3
++
++
++#define AR7240_REG_STATS_BASE(_port)	(0x20000 + (_port) * 0x100)
++
++#define AR7240_STATS_RXBROAD		0x00
++#define AR7240_STATS_RXPAUSE		0x04
++#define AR7240_STATS_RXMULTI		0x08
++#define AR7240_STATS_RXFCSERR		0x0c
++#define AR7240_STATS_RXALIGNERR		0x10
++#define AR7240_STATS_RXRUNT		0x14
++#define AR7240_STATS_RXFRAGMENT		0x18
++#define AR7240_STATS_RX64BYTE		0x1c
++#define AR7240_STATS_RX128BYTE		0x20
++#define AR7240_STATS_RX256BYTE		0x24
++#define AR7240_STATS_RX512BYTE		0x28
++#define AR7240_STATS_RX1024BYTE		0x2c
++#define AR7240_STATS_RX1518BYTE		0x30
++#define AR7240_STATS_RXMAXBYTE		0x34
++#define AR7240_STATS_RXTOOLONG		0x38
++#define AR7240_STATS_RXGOODBYTE		0x3c
++#define AR7240_STATS_RXBADBYTE		0x44
++#define AR7240_STATS_RXOVERFLOW		0x4c
++#define AR7240_STATS_FILTERED		0x50
++#define AR7240_STATS_TXBROAD		0x54
++#define AR7240_STATS_TXPAUSE		0x58
++#define AR7240_STATS_TXMULTI		0x5c
++#define AR7240_STATS_TXUNDERRUN		0x60
++#define AR7240_STATS_TX64BYTE		0x64
++#define AR7240_STATS_TX128BYTE		0x68
++#define AR7240_STATS_TX256BYTE		0x6c
++#define AR7240_STATS_TX512BYTE		0x70
++#define AR7240_STATS_TX1024BYTE		0x74
++#define AR7240_STATS_TX1518BYTE		0x78
++#define AR7240_STATS_TXMAXBYTE		0x7c
++#define AR7240_STATS_TXOVERSIZE		0x80
++#define AR7240_STATS_TXBYTE		0x84
++#define AR7240_STATS_TXCOLLISION	0x8c
++#define AR7240_STATS_TXABORTCOL		0x90
++#define AR7240_STATS_TXMULTICOL		0x94
++#define AR7240_STATS_TXSINGLECOL	0x98
++#define AR7240_STATS_TXEXCDEFER		0x9c
++#define AR7240_STATS_TXDEFER		0xa0
++#define AR7240_STATS_TXLATECOL		0xa4
++
++#define AR7240_PORT_CPU		0
++#define AR7240_NUM_PORTS	6
++#define AR7240_NUM_PHYS		5
++
++#define AR7240_PHY_ID1		0x004d
++#define AR7240_PHY_ID2		0xd041
++
++#define AR934X_PHY_ID1		0x004d
++#define AR934X_PHY_ID2		0xd042
++
++#define AR7240_MAX_VLANS	16
++
++#define AR934X_REG_OPER_MODE0		0x04
++#define   AR934X_OPER_MODE0_MAC_GMII_EN	BIT(6)
++#define   AR934X_OPER_MODE0_PHY_MII_EN	BIT(10)
++
++#define AR934X_REG_OPER_MODE1		0x08
++#define   AR934X_REG_OPER_MODE1_PHY4_MII_EN	BIT(28)
++
++#define AR934X_REG_FLOOD_MASK		0x2c
++#define   AR934X_FLOOD_MASK_MC_DP(_p)	BIT(16 + (_p))
++#define   AR934X_FLOOD_MASK_BC_DP(_p)	BIT(25 + (_p))
++
++#define AR934X_REG_QM_CTRL		0x3c
++#define   AR934X_QM_CTRL_ARP_EN		BIT(15)
++
++#define AR934X_REG_AT_CTRL		0x5c
++#define   AR934X_AT_CTRL_AGE_TIME	BITS(0, 15)
++#define   AR934X_AT_CTRL_AGE_EN		BIT(17)
++#define   AR934X_AT_CTRL_LEARN_CHANGE	BIT(18)
++
++#define AR934X_MIB_ENABLE		BIT(30)
++
++#define AR934X_REG_PORT_BASE(_port)	(0x100 + (_port) * 0x100)
++
++#define AR934X_REG_PORT_VLAN1(_port)	(AR934X_REG_PORT_BASE((_port)) + 0x08)
++#define   AR934X_PORT_VLAN1_DEFAULT_SVID_S		0
++#define   AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN 	BIT(12)
++#define   AR934X_PORT_VLAN1_PORT_TLS_MODE		BIT(13)
++#define   AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN		BIT(14)
++#define   AR934X_PORT_VLAN1_PORT_CLONE_EN		BIT(15)
++#define   AR934X_PORT_VLAN1_DEFAULT_CVID_S		16
++#define   AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN		BIT(28)
++#define   AR934X_PORT_VLAN1_ING_PORT_PRI_S		29
++
++#define AR934X_REG_PORT_VLAN2(_port)	(AR934X_REG_PORT_BASE((_port)) + 0x0c)
++#define   AR934X_PORT_VLAN2_PORT_VID_MEM_S		16
++#define   AR934X_PORT_VLAN2_8021Q_MODE_S		30
++#define   AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY	0
++#define   AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK	1
++#define   AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY	2
++#define   AR934X_PORT_VLAN2_8021Q_MODE_SECURE		3
++
++#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev)
++
++struct ar7240sw_port_stat {
++	unsigned long rx_broadcast;
++	unsigned long rx_pause;
++	unsigned long rx_multicast;
++	unsigned long rx_fcs_error;
++	unsigned long rx_align_error;
++	unsigned long rx_runt;
++	unsigned long rx_fragments;
++	unsigned long rx_64byte;
++	unsigned long rx_128byte;
++	unsigned long rx_256byte;
++	unsigned long rx_512byte;
++	unsigned long rx_1024byte;
++	unsigned long rx_1518byte;
++	unsigned long rx_maxbyte;
++	unsigned long rx_toolong;
++	unsigned long rx_good_byte;
++	unsigned long rx_bad_byte;
++	unsigned long rx_overflow;
++	unsigned long filtered;
++
++	unsigned long tx_broadcast;
++	unsigned long tx_pause;
++	unsigned long tx_multicast;
++	unsigned long tx_underrun;
++	unsigned long tx_64byte;
++	unsigned long tx_128byte;
++	unsigned long tx_256byte;
++	unsigned long tx_512byte;
++	unsigned long tx_1024byte;
++	unsigned long tx_1518byte;
++	unsigned long tx_maxbyte;
++	unsigned long tx_oversize;
++	unsigned long tx_byte;
++	unsigned long tx_collision;
++	unsigned long tx_abortcol;
++	unsigned long tx_multicol;
++	unsigned long tx_singlecol;
++	unsigned long tx_excdefer;
++	unsigned long tx_defer;
++	unsigned long tx_xlatecol;
++};
++
++struct ar7240sw {
++	struct mii_bus	*mii_bus;
++	struct ag71xx_switch_platform_data *swdata;
++	struct switch_dev swdev;
++	int num_ports;
++	u8 ver;
++	bool vlan;
++	u16 vlan_id[AR7240_MAX_VLANS];
++	u8 vlan_table[AR7240_MAX_VLANS];
++	u8 vlan_tagged;
++	u16 pvid[AR7240_NUM_PORTS];
++	char buf[80];
++
++	rwlock_t stats_lock;
++	struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS];
++};
++
++struct ar7240sw_hw_stat {
++	char string[ETH_GSTRING_LEN];
++	int sizeof_stat;
++	int reg;
++};
++
++static DEFINE_MUTEX(reg_mutex);
++
++static inline int sw_is_ar7240(struct ar7240sw *as)
++{
++	return as->ver == AR7240_MASK_CTRL_VERSION_AR7240;
++}
++
++static inline int sw_is_ar934x(struct ar7240sw *as)
++{
++	return as->ver == AR7240_MASK_CTRL_VERSION_AR934X;
++}
++
++static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port)
++{
++	return BIT(port);
++}
++
++static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as)
++{
++	return BIT(as->swdev.ports) - 1;
++}
++
++static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port)
++{
++	return ar7240sw_port_mask_all(as) & ~BIT(port);
++}
++
++static inline u16 mk_phy_addr(u32 reg)
++{
++	return 0x17 & ((reg >> 4) | 0x10);
++}
++
++static inline u16 mk_phy_reg(u32 reg)
++{
++	return (reg << 1) & 0x1e;
++}
++
++static inline u16 mk_high_addr(u32 reg)
++{
++	return (reg >> 7) & 0x1ff;
++}
++
++static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg)
++{
++	unsigned long flags;
++	u16 phy_addr;
++	u16 phy_reg;
++	u32 hi, lo;
++
++	reg = (reg & 0xfffffffc) >> 2;
++	phy_addr = mk_phy_addr(reg);
++	phy_reg = mk_phy_reg(reg);
++
++	local_irq_save(flags);
++	ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
++	lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg);
++	hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1);
++	local_irq_restore(flags);
++
++	return (hi << 16) | lo;
++}
++
++static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val)
++{
++	unsigned long flags;
++	u16 phy_addr;
++	u16 phy_reg;
++
++	reg = (reg & 0xfffffffc) >> 2;
++	phy_addr = mk_phy_addr(reg);
++	phy_reg = mk_phy_reg(reg);
++
++	local_irq_save(flags);
++	ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
++	ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16));
++	ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff));
++	local_irq_restore(flags);
++}
++
++static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr)
++{
++	u32 ret;
++
++	mutex_lock(&reg_mutex);
++	ret = __ar7240sw_reg_read(mii, reg_addr);
++	mutex_unlock(&reg_mutex);
++
++	return ret;
++}
++
++static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val)
++{
++	mutex_lock(&reg_mutex);
++	__ar7240sw_reg_write(mii, reg_addr, reg_val);
++	mutex_unlock(&reg_mutex);
++}
++
++static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val)
++{
++	u32 t;
++
++	mutex_lock(&reg_mutex);
++	t = __ar7240sw_reg_read(mii, reg);
++	t &= ~mask;
++	t |= val;
++	__ar7240sw_reg_write(mii, reg, t);
++	mutex_unlock(&reg_mutex);
++
++	return t;
++}
++
++static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val)
++{
++	u32 t;
++
++	mutex_lock(&reg_mutex);
++	t = __ar7240sw_reg_read(mii, reg);
++	t |= val;
++	__ar7240sw_reg_write(mii, reg, t);
++	mutex_unlock(&reg_mutex);
++}
++
++static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
++			       unsigned timeout)
++{
++	int i;
++
++	for (i = 0; i < timeout; i++) {
++		u32 t;
++
++		t = __ar7240sw_reg_read(mii, reg);
++		if ((t & mask) == val)
++			return 0;
++
++		usleep_range(1000, 2000);
++	}
++
++	return -ETIMEDOUT;
++}
++
++static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
++			     unsigned timeout)
++{
++	int ret;
++
++	mutex_lock(&reg_mutex);
++	ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout);
++	mutex_unlock(&reg_mutex);
++	return ret;
++}
++
++u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
++		      unsigned reg_addr)
++{
++	u32 t, val = 0xffff;
++	int err;
++
++	if (phy_addr >= AR7240_NUM_PHYS)
++		return 0xffff;
++
++	mutex_lock(&reg_mutex);
++	t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
++	    (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
++	    AR7240_MDIO_CTRL_MASTER_EN |
++	    AR7240_MDIO_CTRL_BUSY |
++	    AR7240_MDIO_CTRL_CMD_READ;
++
++	__ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
++	err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
++				  AR7240_MDIO_CTRL_BUSY, 0, 5);
++	if (!err)
++		val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL);
++	mutex_unlock(&reg_mutex);
++
++	return val & AR7240_MDIO_CTRL_DATA_M;
++}
++
++int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
++		       unsigned reg_addr, u16 reg_val)
++{
++	u32 t;
++	int ret;
++
++	if (phy_addr >= AR7240_NUM_PHYS)
++		return -EINVAL;
++
++	mutex_lock(&reg_mutex);
++	t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
++	    (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
++	    AR7240_MDIO_CTRL_MASTER_EN |
++	    AR7240_MDIO_CTRL_BUSY |
++	    AR7240_MDIO_CTRL_CMD_WRITE |
++	    reg_val;
++
++	__ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
++	ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
++				  AR7240_MDIO_CTRL_BUSY, 0, 5);
++	mutex_unlock(&reg_mutex);
++
++	return ret;
++}
++
++static int ar7240sw_capture_stats(struct ar7240sw *as)
++{
++	struct mii_bus *mii = as->mii_bus;
++	int port;
++	int ret;
++
++	write_lock(&as->stats_lock);
++
++	/* Capture the hardware statistics for all ports */
++	ar7240sw_reg_rmw(mii, AR7240_REG_MIB_FUNCTION0,
++			 (AR7240_MIB_FUNC_M << AR7240_MIB_FUNC_S),
++			 (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S));
++
++	/* Wait for the capturing to complete. */
++	ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0,
++				AR7240_MIB_BUSY, 0, 10);
++
++	if (ret)
++		goto unlock;
++
++	for (port = 0; port < AR7240_NUM_PORTS; port++) {
++		unsigned int base;
++		struct ar7240sw_port_stat *stats;
++
++		base = AR7240_REG_STATS_BASE(port);
++		stats = &as->port_stats[port];
++
++#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r)
++
++		stats->rx_good_byte += READ_STAT(RXGOODBYTE);
++		stats->tx_byte += READ_STAT(TXBYTE);
++
++#undef READ_STAT
++	}
++
++	ret = 0;
++
++unlock:
++	write_unlock(&as->stats_lock);
++	return ret;
++}
++
++static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port)
++{
++	ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port),
++			   AR7240_PORT_CTRL_STATE_DISABLED);
++}
++
++static void ar7240sw_setup(struct ar7240sw *as)
++{
++	struct mii_bus *mii = as->mii_bus;
++
++	/* Enable CPU port, and disable mirror port */
++	ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT,
++			   AR7240_CPU_PORT_EN |
++			   (15 << AR7240_MIRROR_PORT_S));
++
++	/* Setup TAG priority mapping */
++	ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50);
++
++	if (sw_is_ar934x(as)) {
++		/* Enable aging, MAC replacing */
++		ar7240sw_reg_write(mii, AR934X_REG_AT_CTRL,
++			0x2b /* 5 min age time */ |
++			AR934X_AT_CTRL_AGE_EN |
++			AR934X_AT_CTRL_LEARN_CHANGE);
++		/* Enable ARP frame acknowledge */
++		ar7240sw_reg_set(mii, AR934X_REG_QM_CTRL,
++				 AR934X_QM_CTRL_ARP_EN);
++		/* Enable Broadcast/Multicast frames transmitted to the CPU */
++		ar7240sw_reg_set(mii, AR934X_REG_FLOOD_MASK,
++				 AR934X_FLOOD_MASK_BC_DP(0) |
++				 AR934X_FLOOD_MASK_MC_DP(0));
++
++		/* setup MTU */
++		ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
++				 AR9340_GLOBAL_CTRL_MTU_M,
++				 AR9340_GLOBAL_CTRL_MTU_M);
++
++		/* Enable MIB counters */
++		ar7240sw_reg_set(mii, AR7240_REG_MIB_FUNCTION0,
++				 AR934X_MIB_ENABLE);
++
++	} else {
++		/* Enable ARP frame acknowledge, aging, MAC replacing */
++		ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL,
++			AR7240_AT_CTRL_RESERVED |
++			0x2b /* 5 min age time */ |
++			AR7240_AT_CTRL_AGE_EN |
++			AR7240_AT_CTRL_ARP_EN |
++			AR7240_AT_CTRL_LEARN_CHANGE);
++		/* Enable Broadcast frames transmitted to the CPU */
++		ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK,
++				 AR7240_FLOOD_MASK_BROAD_TO_CPU);
++
++		/* setup MTU */
++		ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
++				 AR7240_GLOBAL_CTRL_MTU_M,
++				 AR7240_GLOBAL_CTRL_MTU_M);
++	}
++
++	/* setup Service TAG */
++	ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0);
++}
++
++/* inspired by phy_poll_reset in drivers/net/phy/phy_device.c */
++static int
++ar7240sw_phy_poll_reset(struct mii_bus *bus)
++{
++	const unsigned int sleep_msecs = 20;
++	int ret, elapsed, i;
++
++	for (elapsed = sleep_msecs; elapsed <= 600;
++	     elapsed += sleep_msecs) {
++		msleep(sleep_msecs);
++		for (i = 0; i < AR7240_NUM_PHYS; i++) {
++			ret = ar7240sw_phy_read(bus, i, MII_BMCR);
++			if (ret < 0)
++				return ret;
++			if (ret & BMCR_RESET)
++				break;
++			if (i == AR7240_NUM_PHYS - 1) {
++				usleep_range(1000, 2000);
++				return 0;
++			}
++		}
++	}
++	return -ETIMEDOUT;
++}
++
++static int ar7240sw_reset(struct ar7240sw *as)
++{
++	struct mii_bus *mii = as->mii_bus;
++	int ret;
++	int i;
++
++	/* Set all ports to disabled state. */
++	for (i = 0; i < AR7240_NUM_PORTS; i++)
++		ar7240sw_disable_port(as, i);
++
++	/* Wait for transmit queues to drain. */
++	usleep_range(2000, 3000);
++
++	/* Reset the switch. */
++	ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL,
++			   AR7240_MASK_CTRL_SOFT_RESET);
++
++	ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL,
++				AR7240_MASK_CTRL_SOFT_RESET, 0, 1000);
++
++	/* setup PHYs */
++	for (i = 0; i < AR7240_NUM_PHYS; i++) {
++		ar7240sw_phy_write(mii, i, MII_ADVERTISE,
++				   ADVERTISE_ALL | ADVERTISE_PAUSE_CAP |
++				   ADVERTISE_PAUSE_ASYM);
++		ar7240sw_phy_write(mii, i, MII_BMCR,
++				   BMCR_RESET | BMCR_ANENABLE);
++	}
++	ret = ar7240sw_phy_poll_reset(mii);
++	if (ret)
++		return ret;
++
++	ar7240sw_setup(as);
++	return ret;
++}
++
++static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask)
++{
++	struct mii_bus *mii = as->mii_bus;
++	u32 ctrl;
++	u32 vid, mode;
++
++	ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN |
++		AR7240_PORT_CTRL_SINGLE_VLAN;
++
++	if (port == AR7240_PORT_CPU) {
++		ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
++				   AR7240_PORT_STATUS_SPEED_1000 |
++				   AR7240_PORT_STATUS_TXFLOW |
++				   AR7240_PORT_STATUS_RXFLOW |
++				   AR7240_PORT_STATUS_TXMAC |
++				   AR7240_PORT_STATUS_RXMAC |
++				   AR7240_PORT_STATUS_DUPLEX);
++	} else {
++		ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
++				   AR7240_PORT_STATUS_LINK_AUTO);
++	}
++
++	/* Set the default VID for this port */
++	if (as->vlan) {
++		vid = as->vlan_id[as->pvid[port]];
++		mode = AR7240_PORT_VLAN_MODE_SECURE;
++	} else {
++		vid = port;
++		mode = AR7240_PORT_VLAN_MODE_PORT_ONLY;
++	}
++
++	if (as->vlan) {
++		if (as->vlan_tagged & BIT(port))
++			ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD <<
++				AR7240_PORT_CTRL_VLAN_MODE_S;
++		else
++			ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP <<
++				AR7240_PORT_CTRL_VLAN_MODE_S;
++	} else {
++		ctrl |= AR7240_PORT_CTRL_VLAN_MODE_KEEP <<
++			AR7240_PORT_CTRL_VLAN_MODE_S;
++	}
++
++	if (!portmask) {
++		if (port == AR7240_PORT_CPU)
++			portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU);
++		else
++			portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU);
++	}
++
++	/* allow the port to talk to all other ports, but exclude its
++	 * own ID to prevent frames from being reflected back to the
++	 * port that they came from */
++	portmask &= ar7240sw_port_mask_but(as, port);
++
++	ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl);
++	if (sw_is_ar934x(as)) {
++		u32 vlan1, vlan2;
++
++		vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S);
++		vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) |
++			(mode << AR934X_PORT_VLAN2_8021Q_MODE_S);
++		ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1);
++		ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2);
++	} else {
++		u32 vlan;
++
++		vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) |
++		       (portmask << AR7240_PORT_VLAN_DEST_PORTS_S);
++
++		ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan);
++	}
++}
++
++static int ar7240_set_addr(struct ar7240sw *as, u8 *addr)
++{
++	struct mii_bus *mii = as->mii_bus;
++	u32 t;
++
++	t = (addr[4] << 8) | addr[5];
++	ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t);
++
++	t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
++	ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t);
++
++	return 0;
++}
++
++static int
++ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
++		struct switch_val *val)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	as->vlan_id[val->port_vlan] = val->value.i;
++	return 0;
++}
++
++static int
++ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
++		struct switch_val *val)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	val->value.i = as->vlan_id[val->port_vlan];
++	return 0;
++}
++
++static int
++ar7240_set_pvid(struct switch_dev *dev, int port, int vlan)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++
++	/* make sure no invalid PVIDs get set */
++
++	if (vlan >= dev->vlans)
++		return -EINVAL;
++
++	as->pvid[port] = vlan;
++	return 0;
++}
++
++static int
++ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	*vlan = as->pvid[port];
++	return 0;
++}
++
++static int
++ar7240_get_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	u8 ports = as->vlan_table[val->port_vlan];
++	int i;
++
++	val->len = 0;
++	for (i = 0; i < as->swdev.ports; i++) {
++		struct switch_port *p;
++
++		if (!(ports & (1 << i)))
++			continue;
++
++		p = &val->value.ports[val->len++];
++		p->id = i;
++		if (as->vlan_tagged & (1 << i))
++			p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
++		else
++			p->flags = 0;
++	}
++	return 0;
++}
++
++static int
++ar7240_set_ports(struct switch_dev *dev, struct switch_val *val)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	u8 *vt = &as->vlan_table[val->port_vlan];
++	int i, j;
++
++	*vt = 0;
++	for (i = 0; i < val->len; i++) {
++		struct switch_port *p = &val->value.ports[i];
++
++		if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
++			as->vlan_tagged |= (1 << p->id);
++		else {
++			as->vlan_tagged &= ~(1 << p->id);
++			as->pvid[p->id] = val->port_vlan;
++
++			/* make sure that an untagged port does not
++			 * appear in other vlans */
++			for (j = 0; j < AR7240_MAX_VLANS; j++) {
++				if (j == val->port_vlan)
++					continue;
++				as->vlan_table[j] &= ~(1 << p->id);
++			}
++		}
++
++		*vt |= 1 << p->id;
++	}
++	return 0;
++}
++
++static int
++ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++		struct switch_val *val)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	as->vlan = !!val->value.i;
++	return 0;
++}
++
++static int
++ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
++		struct switch_val *val)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	val->value.i = as->vlan;
++	return 0;
++}
++
++static void
++ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val)
++{
++	struct mii_bus *mii = as->mii_bus;
++
++	if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5))
++		return;
++
++	if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) {
++		val &= AR7240_VTUDATA_MEMBER;
++		val |= AR7240_VTUDATA_VALID;
++		ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val);
++	}
++	op |= AR7240_VTU_ACTIVE;
++	ar7240sw_reg_write(mii, AR7240_REG_VTU, op);
++}
++
++static int
++ar7240_hw_apply(struct switch_dev *dev)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	u8 portmask[AR7240_NUM_PORTS];
++	int i, j;
++
++	/* flush all vlan translation unit entries */
++	ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0);
++
++	memset(portmask, 0, sizeof(portmask));
++	if (as->vlan) {
++		/* calculate the port destination masks and load vlans
++		 * into the vlan translation unit */
++		for (j = 0; j < AR7240_MAX_VLANS; j++) {
++			u8 vp = as->vlan_table[j];
++
++			if (!vp)
++				continue;
++
++			for (i = 0; i < as->swdev.ports; i++) {
++				u8 mask = (1 << i);
++				if (vp & mask)
++					portmask[i] |= vp & ~mask;
++			}
++
++			ar7240_vtu_op(as,
++				AR7240_VTU_OP_LOAD |
++				(as->vlan_id[j] << AR7240_VTU_VID_S),
++				as->vlan_table[j]);
++		}
++	} else {
++		/* vlan disabled:
++		 * isolate all ports, but connect them to the cpu port */
++		for (i = 0; i < as->swdev.ports; i++) {
++			if (i == AR7240_PORT_CPU)
++				continue;
++
++			portmask[i] = 1 << AR7240_PORT_CPU;
++			portmask[AR7240_PORT_CPU] |= (1 << i);
++		}
++	}
++
++	/* update the port destination mask registers and tag settings */
++	for (i = 0; i < as->swdev.ports; i++)
++		ar7240sw_setup_port(as, i, portmask[i]);
++
++	return 0;
++}
++
++static int
++ar7240_reset_switch(struct switch_dev *dev)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	ar7240sw_reset(as);
++	return 0;
++}
++
++static int
++ar7240_get_port_link(struct switch_dev *dev, int port,
++		     struct switch_port_link *link)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++	struct mii_bus *mii = as->mii_bus;
++	u32 status;
++
++	if (port > AR7240_NUM_PORTS)
++		return -EINVAL;
++
++	status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port));
++	link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO);
++	if (link->aneg) {
++		link->link = !!(status & AR7240_PORT_STATUS_LINK_UP);
++		if (!link->link)
++			return 0;
++	} else {
++		link->link = true;
++	}
++
++	link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX);
++	link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW);
++	link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW);
++	switch (status & AR7240_PORT_STATUS_SPEED_M) {
++	case AR7240_PORT_STATUS_SPEED_10:
++		link->speed = SWITCH_PORT_SPEED_10;
++		break;
++	case AR7240_PORT_STATUS_SPEED_100:
++		link->speed = SWITCH_PORT_SPEED_100;
++		break;
++	case AR7240_PORT_STATUS_SPEED_1000:
++		link->speed = SWITCH_PORT_SPEED_1000;
++		break;
++	}
++
++	return 0;
++}
++
++static int
++ar7240_get_port_stats(struct switch_dev *dev, int port,
++		      struct switch_port_stats *stats)
++{
++	struct ar7240sw *as = sw_to_ar7240(dev);
++
++	if (port > AR7240_NUM_PORTS)
++		return -EINVAL;
++
++	ar7240sw_capture_stats(as);
++
++	read_lock(&as->stats_lock);
++	stats->rx_bytes = as->port_stats[port].rx_good_byte;
++	stats->tx_bytes = as->port_stats[port].tx_byte;
++	read_unlock(&as->stats_lock);
++
++	return 0;
++}
++
++static struct switch_attr ar7240_globals[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "enable_vlan",
++		.description = "Enable VLAN mode",
++		.set = ar7240_set_vlan,
++		.get = ar7240_get_vlan,
++		.max = 1
++	},
++};
++
++static struct switch_attr ar7240_port[] = {
++};
++
++static struct switch_attr ar7240_vlan[] = {
++	{
++		.type = SWITCH_TYPE_INT,
++		.name = "vid",
++		.description = "VLAN ID",
++		.set = ar7240_set_vid,
++		.get = ar7240_get_vid,
++		.max = 4094,
++	},
++};
++
++static const struct switch_dev_ops ar7240_ops = {
++	.attr_global = {
++		.attr = ar7240_globals,
++		.n_attr = ARRAY_SIZE(ar7240_globals),
++	},
++	.attr_port = {
++		.attr = ar7240_port,
++		.n_attr = ARRAY_SIZE(ar7240_port),
++	},
++	.attr_vlan = {
++		.attr = ar7240_vlan,
++		.n_attr = ARRAY_SIZE(ar7240_vlan),
++	},
++	.get_port_pvid = ar7240_get_pvid,
++	.set_port_pvid = ar7240_set_pvid,
++	.get_vlan_ports = ar7240_get_ports,
++	.set_vlan_ports = ar7240_set_ports,
++	.apply_config = ar7240_hw_apply,
++	.reset_switch = ar7240_reset_switch,
++	.get_port_link = ar7240_get_port_link,
++	.get_port_stats = ar7240_get_port_stats,
++};
++
++static struct ar7240sw *ar7240_probe(struct ag71xx *ag)
++{
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++	struct mii_bus *mii = ag->mii_bus;
++	struct ar7240sw *as;
++	struct switch_dev *swdev;
++	u32 ctrl;
++	u16 phy_id1;
++	u16 phy_id2;
++	int i;
++
++	phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1);
++	phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2);
++	if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) &&
++	    (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) {
++		pr_err("%s: unknown phy id '%04x:%04x'\n",
++		       dev_name(&mii->dev), phy_id1, phy_id2);
++		return NULL;
++	}
++
++	as = kzalloc(sizeof(*as), GFP_KERNEL);
++	if (!as)
++		return NULL;
++
++	as->mii_bus = mii;
++	as->swdata = pdata->switch_data;
++
++	swdev = &as->swdev;
++
++	ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL);
++	as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) &
++		  AR7240_MASK_CTRL_VERSION_M;
++
++	if (sw_is_ar7240(as)) {
++		swdev->name = "AR7240/AR9330 built-in switch";
++		swdev->ports = AR7240_NUM_PORTS - 1;
++	} else if (sw_is_ar934x(as)) {
++		swdev->name = "AR934X built-in switch";
++
++		if (pdata->phy_if_mode == PHY_INTERFACE_MODE_GMII) {
++			ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
++					 AR934X_OPER_MODE0_MAC_GMII_EN);
++		} else if (pdata->phy_if_mode == PHY_INTERFACE_MODE_MII) {
++			ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
++					 AR934X_OPER_MODE0_PHY_MII_EN);
++		} else {
++			pr_err("%s: invalid PHY interface mode\n",
++			       dev_name(&mii->dev));
++			goto err_free;
++		}
++
++		if (as->swdata->phy4_mii_en) {
++			ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1,
++					 AR934X_REG_OPER_MODE1_PHY4_MII_EN);
++			swdev->ports = AR7240_NUM_PORTS - 1;
++		} else {
++			swdev->ports = AR7240_NUM_PORTS;
++		}
++	} else {
++		pr_err("%s: unsupported chip, ctrl=%08x\n",
++			dev_name(&mii->dev), ctrl);
++		goto err_free;
++	}
++
++	swdev->cpu_port = AR7240_PORT_CPU;
++	swdev->vlans = AR7240_MAX_VLANS;
++	swdev->ops = &ar7240_ops;
++
++	if (register_switch(&as->swdev, ag->dev) < 0)
++		goto err_free;
++
++	pr_info("%s: Found an %s\n", dev_name(&mii->dev), swdev->name);
++
++	/* initialize defaults */
++	for (i = 0; i < AR7240_MAX_VLANS; i++)
++		as->vlan_id[i] = i;
++
++	as->vlan_table[0] = ar7240sw_port_mask_all(as);
++
++	return as;
++
++err_free:
++	kfree(as);
++	return NULL;
++}
++
++static void link_function(struct work_struct *work) {
++	struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work);
++	struct ar7240sw *as = ag->phy_priv;
++	unsigned long flags;
++	u8 mask;
++	int i;
++	int status = 0;
++
++	mask = ~as->swdata->phy_poll_mask;
++	for (i = 0; i < AR7240_NUM_PHYS; i++) {
++		int link;
++
++		if (!(mask & BIT(i)))
++			continue;
++
++		link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR);
++		if (link & BMSR_LSTATUS) {
++			status = 1;
++			break;
++		}
++	}
++
++	spin_lock_irqsave(&ag->lock, flags);
++	if (status != ag->link) {
++		ag->link = status;
++		ag71xx_link_adjust(ag);
++	}
++	spin_unlock_irqrestore(&ag->lock, flags);
++
++	schedule_delayed_work(&ag->link_work, HZ / 2);
++}
++
++void ag71xx_ar7240_start(struct ag71xx *ag)
++{
++	struct ar7240sw *as = ag->phy_priv;
++
++	ar7240sw_reset(as);
++
++	ag->speed = SPEED_1000;
++	ag->duplex = 1;
++
++	ar7240_set_addr(as, ag->dev->dev_addr);
++	ar7240_hw_apply(&as->swdev);
++
++	schedule_delayed_work(&ag->link_work, HZ / 10);
++}
++
++void ag71xx_ar7240_stop(struct ag71xx *ag)
++{
++	cancel_delayed_work_sync(&ag->link_work);
++}
++
++int ag71xx_ar7240_init(struct ag71xx *ag)
++{
++	struct ar7240sw *as;
++
++	as = ar7240_probe(ag);
++	if (!as)
++		return -ENODEV;
++
++	ag->phy_priv = as;
++	ar7240sw_reset(as);
++
++	rwlock_init(&as->stats_lock);
++	INIT_DELAYED_WORK(&ag->link_work, link_function);
++
++	return 0;
++}
++
++void ag71xx_ar7240_cleanup(struct ag71xx *ag)
++{
++	struct ar7240sw *as = ag->phy_priv;
++
++	if (!as)
++		return;
++
++	unregister_switch(&as->swdev);
++	kfree(as);
++	ag->phy_priv = NULL;
++}
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,44 @@
++/*
++ *  Atheros AR71xx built-in ethernet mac driver
++ *  Special support for the Atheros ar8216 switch chip
++ *
++ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  Based on Atheros' AG7100 driver
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++#define AR8216_PACKET_TYPE_MASK		0xf
++#define AR8216_PACKET_TYPE_NORMAL	0
++
++#define AR8216_HEADER_LEN	2
++
++void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb)
++{
++	skb_push(skb, AR8216_HEADER_LEN);
++	skb->data[0] = 0x10;
++	skb->data[1] = 0x80;
++}
++
++int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
++				int pktlen)
++{
++	u8 type;
++
++	type = skb->data[1] & AR8216_PACKET_TYPE_MASK;
++	switch (type) {
++	case AR8216_PACKET_TYPE_NORMAL:
++		break;
++
++	default:
++		return -EINVAL;
++	}
++
++	skb_pull(skb, AR8216_HEADER_LEN);
++	return 0;
++}
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,285 @@
++/*
++ *  Atheros AR71xx built-in ethernet mac driver
++ *
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Based on Atheros' AG7100 driver
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/debugfs.h>
++
++#include "ag71xx.h"
++
++static struct dentry *ag71xx_debugfs_root;
++
++static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file)
++{
++	file->private_data = inode->i_private;
++	return 0;
++}
++
++void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status)
++{
++	if (status)
++		ag->debug.int_stats.total++;
++	if (status & AG71XX_INT_TX_PS)
++		ag->debug.int_stats.tx_ps++;
++	if (status & AG71XX_INT_TX_UR)
++		ag->debug.int_stats.tx_ur++;
++	if (status & AG71XX_INT_TX_BE)
++		ag->debug.int_stats.tx_be++;
++	if (status & AG71XX_INT_RX_PR)
++		ag->debug.int_stats.rx_pr++;
++	if (status & AG71XX_INT_RX_OF)
++		ag->debug.int_stats.rx_of++;
++	if (status & AG71XX_INT_RX_BE)
++		ag->debug.int_stats.rx_be++;
++}
++
++static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
++				   size_t count, loff_t *ppos)
++{
++#define PR_INT_STAT(_label, _field)					\
++	len += snprintf(buf + len, sizeof(buf) - len,			\
++		"%20s: %10lu\n", _label, ag->debug.int_stats._field);
++
++	struct ag71xx *ag = file->private_data;
++	char buf[256];
++	unsigned int len = 0;
++
++	PR_INT_STAT("TX Packet Sent", tx_ps);
++	PR_INT_STAT("TX Underrun", tx_ur);
++	PR_INT_STAT("TX Bus Error", tx_be);
++	PR_INT_STAT("RX Packet Received", rx_pr);
++	PR_INT_STAT("RX Overflow", rx_of);
++	PR_INT_STAT("RX Bus Error", rx_be);
++	len += snprintf(buf + len, sizeof(buf) - len, "\n");
++	PR_INT_STAT("Total", total);
++
++	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
++#undef PR_INT_STAT
++}
++
++static const struct file_operations ag71xx_fops_int_stats = {
++	.open	= ag71xx_debugfs_generic_open,
++	.read	= read_file_int_stats,
++	.owner	= THIS_MODULE
++};
++
++void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx)
++{
++	struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
++
++	if (rx) {
++		stats->rx_count++;
++		stats->rx_packets += rx;
++		if (rx <= AG71XX_NAPI_WEIGHT)
++			stats->rx[rx]++;
++		if (rx > stats->rx_packets_max)
++			stats->rx_packets_max = rx;
++	}
++
++	if (tx) {
++		stats->tx_count++;
++		stats->tx_packets += tx;
++		if (tx <= AG71XX_NAPI_WEIGHT)
++			stats->tx[tx]++;
++		if (tx > stats->tx_packets_max)
++			stats->tx_packets_max = tx;
++	}
++}
++
++static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf,
++				    size_t count, loff_t *ppos)
++{
++	struct ag71xx *ag = file->private_data;
++	struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
++	char *buf;
++	unsigned int buflen;
++	unsigned int len = 0;
++	unsigned long rx_avg = 0;
++	unsigned long tx_avg = 0;
++	int ret;
++	int i;
++
++	buflen = 2048;
++	buf = kmalloc(buflen, GFP_KERNEL);
++	if (!buf)
++		return -ENOMEM;
++
++	if (stats->rx_count)
++		rx_avg = stats->rx_packets / stats->rx_count;
++
++	if (stats->tx_count)
++		tx_avg = stats->tx_packets / stats->tx_count;
++
++	len += snprintf(buf + len, buflen - len, "%3s  %10s %10s\n",
++			"len", "rx", "tx");
++
++	for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++)
++		len += snprintf(buf + len, buflen - len,
++				"%3d: %10lu %10lu\n",
++				i, stats->rx[i], stats->tx[i]);
++
++	len += snprintf(buf + len, buflen - len, "\n");
++
++	len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
++			"sum", stats->rx_count, stats->tx_count);
++	len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
++			"avg", rx_avg, tx_avg);
++	len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
++			"max", stats->rx_packets_max, stats->tx_packets_max);
++	len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
++			"pkt", stats->rx_packets, stats->tx_packets);
++
++	ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
++	kfree(buf);
++
++	return ret;
++}
++
++static const struct file_operations ag71xx_fops_napi_stats = {
++	.open	= ag71xx_debugfs_generic_open,
++	.read	= read_file_napi_stats,
++	.owner	= THIS_MODULE
++};
++
++#define DESC_PRINT_LEN	64
++
++static ssize_t read_file_ring(struct file *file, char __user *user_buf,
++			      size_t count, loff_t *ppos,
++			      struct ag71xx *ag,
++			      struct ag71xx_ring *ring,
++			      unsigned desc_reg)
++{
++	char *buf;
++	unsigned int buflen;
++	unsigned int len = 0;
++	unsigned long flags;
++	ssize_t ret;
++	int curr;
++	int dirty;
++	u32 desc_hw;
++	int i;
++
++	buflen = (ring->size * DESC_PRINT_LEN);
++	buf = kmalloc(buflen, GFP_KERNEL);
++	if (!buf)
++		return -ENOMEM;
++
++	len += snprintf(buf + len, buflen - len,
++			"Idx ... %-8s %-8s %-8s %-8s . %-10s\n",
++			"desc", "next", "data", "ctrl", "timestamp");
++
++	spin_lock_irqsave(&ag->lock, flags);
++
++	curr = (ring->curr % ring->size);
++	dirty = (ring->dirty % ring->size);
++	desc_hw = ag71xx_rr(ag, desc_reg);
++	for (i = 0; i < ring->size; i++) {
++		struct ag71xx_buf *ab = &ring->buf[i];
++		struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
++		u32 desc_dma = ((u32) ring->descs_dma) + i * ring->desc_size;
++
++		len += snprintf(buf + len, buflen - len,
++			"%3d %c%c%c %08x %08x %08x %08x %c %10lu\n",
++			i,
++			(i == curr) ? 'C' : ' ',
++			(i == dirty) ? 'D' : ' ',
++			(desc_hw == desc_dma) ? 'H' : ' ',
++			desc_dma,
++			desc->next,
++			desc->data,
++			desc->ctrl,
++			(desc->ctrl & DESC_EMPTY) ? 'E' : '*',
++			ab->timestamp);
++	}
++
++	spin_unlock_irqrestore(&ag->lock, flags);
++
++	ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
++	kfree(buf);
++
++	return ret;
++}
++
++static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf,
++				 size_t count, loff_t *ppos)
++{
++	struct ag71xx *ag = file->private_data;
++
++	return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring,
++			      AG71XX_REG_TX_DESC);
++}
++
++static const struct file_operations ag71xx_fops_tx_ring = {
++	.open	= ag71xx_debugfs_generic_open,
++	.read	= read_file_tx_ring,
++	.owner	= THIS_MODULE
++};
++
++static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf,
++				 size_t count, loff_t *ppos)
++{
++	struct ag71xx *ag = file->private_data;
++
++	return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring,
++			      AG71XX_REG_RX_DESC);
++}
++
++static const struct file_operations ag71xx_fops_rx_ring = {
++	.open	= ag71xx_debugfs_generic_open,
++	.read	= read_file_rx_ring,
++	.owner	= THIS_MODULE
++};
++
++void ag71xx_debugfs_exit(struct ag71xx *ag)
++{
++	debugfs_remove_recursive(ag->debug.debugfs_dir);
++}
++
++int ag71xx_debugfs_init(struct ag71xx *ag)
++{
++	struct device *dev = &ag->pdev->dev;
++
++	ag->debug.debugfs_dir = debugfs_create_dir(dev_name(dev),
++						   ag71xx_debugfs_root);
++	if (!ag->debug.debugfs_dir) {
++		dev_err(dev, "unable to create debugfs directory\n");
++		return -ENOENT;
++	}
++
++	debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir,
++			    ag, &ag71xx_fops_int_stats);
++	debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir,
++			    ag, &ag71xx_fops_napi_stats);
++	debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir,
++			    ag, &ag71xx_fops_tx_ring);
++	debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir,
++			    ag, &ag71xx_fops_rx_ring);
++
++	return 0;
++}
++
++int ag71xx_debugfs_root_init(void)
++{
++	if (ag71xx_debugfs_root)
++		return -EBUSY;
++
++	ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
++	if (!ag71xx_debugfs_root)
++		return -ENOENT;
++
++	return 0;
++}
++
++void ag71xx_debugfs_root_exit(void)
++{
++	debugfs_remove(ag71xx_debugfs_root);
++	ag71xx_debugfs_root = NULL;
++}
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,130 @@
++/*
++ *  Atheros AR71xx built-in ethernet mac driver
++ *
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Based on Atheros' AG7100 driver
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++static int ag71xx_ethtool_get_settings(struct net_device *dev,
++				       struct ethtool_cmd *cmd)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++	struct phy_device *phydev = ag->phy_dev;
++
++	if (!phydev)
++		return -ENODEV;
++
++	return phy_ethtool_gset(phydev, cmd);
++}
++
++static int ag71xx_ethtool_set_settings(struct net_device *dev,
++				       struct ethtool_cmd *cmd)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++	struct phy_device *phydev = ag->phy_dev;
++
++	if (!phydev)
++		return -ENODEV;
++
++	return phy_ethtool_sset(phydev, cmd);
++}
++
++static void ag71xx_ethtool_get_drvinfo(struct net_device *dev,
++				       struct ethtool_drvinfo *info)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++
++	strcpy(info->driver, ag->pdev->dev.driver->name);
++	strcpy(info->version, AG71XX_DRV_VERSION);
++	strcpy(info->bus_info, dev_name(&ag->pdev->dev));
++}
++
++static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++
++	return ag->msg_enable;
++}
++
++static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++
++	ag->msg_enable = msg_level;
++}
++
++static void ag71xx_ethtool_get_ringparam(struct net_device *dev,
++					 struct ethtool_ringparam *er)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++
++	er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX;
++	er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX;
++	er->rx_mini_max_pending = 0;
++	er->rx_jumbo_max_pending = 0;
++
++	er->tx_pending = ag->tx_ring.size;
++	er->rx_pending = ag->rx_ring.size;
++	er->rx_mini_pending = 0;
++	er->rx_jumbo_pending = 0;
++
++	if (ag->tx_ring.desc_split)
++		er->tx_pending /= AG71XX_TX_RING_DS_PER_PKT;
++}
++
++static int ag71xx_ethtool_set_ringparam(struct net_device *dev,
++					struct ethtool_ringparam *er)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++	unsigned tx_size;
++	unsigned rx_size;
++	int err;
++
++	if (er->rx_mini_pending != 0||
++	    er->rx_jumbo_pending != 0 ||
++	    er->rx_pending == 0 ||
++	    er->tx_pending == 0)
++		return -EINVAL;
++
++	tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ?
++		  er->tx_pending : AG71XX_TX_RING_SIZE_MAX;
++
++	rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ?
++		  er->rx_pending : AG71XX_RX_RING_SIZE_MAX;
++
++	if (netif_running(dev)) {
++		err = dev->netdev_ops->ndo_stop(dev);
++		if (err)
++			return err;
++	}
++
++	if (ag->tx_ring.desc_split)
++		tx_size *= AG71XX_TX_RING_DS_PER_PKT;
++
++	ag->tx_ring.size = tx_size;
++	ag->rx_ring.size = rx_size;
++
++	if (netif_running(dev))
++		err = dev->netdev_ops->ndo_open(dev);
++
++	return err;
++}
++
++struct ethtool_ops ag71xx_ethtool_ops = {
++	.set_settings	= ag71xx_ethtool_set_settings,
++	.get_settings	= ag71xx_ethtool_get_settings,
++	.get_drvinfo	= ag71xx_ethtool_get_drvinfo,
++	.get_msglevel	= ag71xx_ethtool_get_msglevel,
++	.set_msglevel	= ag71xx_ethtool_set_msglevel,
++	.get_ringparam	= ag71xx_ethtool_get_ringparam,
++	.set_ringparam	= ag71xx_ethtool_set_ringparam,
++	.get_link	= ethtool_op_get_link,
++};
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx.h linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx.h
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx.h	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,485 @@
++/*
++ *  Atheros AR71xx built-in ethernet mac driver
++ *
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Based on Atheros' AG7100 driver
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef __AG71XX_H
++#define __AG71XX_H
++
++#include <linux/kernel.h>
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/random.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/ethtool.h>
++#include <linux/etherdevice.h>
++#include <linux/if_vlan.h>
++#include <linux/phy.h>
++#include <linux/skbuff.h>
++#include <linux/dma-mapping.h>
++#include <linux/workqueue.h>
++
++#include <linux/bitops.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ag71xx_platform.h>
++
++#define AG71XX_DRV_NAME		"ag71xx"
++#define AG71XX_DRV_VERSION	"0.5.35"
++
++#define AG71XX_NAPI_WEIGHT	64
++#define AG71XX_OOM_REFILL	(1 + HZ/10)
++
++#define AG71XX_INT_ERR	(AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
++#define AG71XX_INT_TX	(AG71XX_INT_TX_PS)
++#define AG71XX_INT_RX	(AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
++
++#define AG71XX_INT_POLL	(AG71XX_INT_RX | AG71XX_INT_TX)
++#define AG71XX_INT_INIT	(AG71XX_INT_ERR | AG71XX_INT_POLL)
++
++#define AG71XX_TX_MTU_LEN	1540
++
++#define AG71XX_TX_RING_SPLIT		512
++#define AG71XX_TX_RING_DS_PER_PKT	DIV_ROUND_UP(AG71XX_TX_MTU_LEN, \
++						     AG71XX_TX_RING_SPLIT)
++#define AG71XX_TX_RING_SIZE_DEFAULT	48
++#define AG71XX_RX_RING_SIZE_DEFAULT	128
++
++#define AG71XX_TX_RING_SIZE_MAX		48
++#define AG71XX_RX_RING_SIZE_MAX		128
++
++#ifdef CONFIG_AG71XX_DEBUG
++#define DBG(fmt, args...)	pr_debug(fmt, ## args)
++#else
++#define DBG(fmt, args...)	do {} while (0)
++#endif
++
++#define ag71xx_assert(_cond)						\
++do {									\
++	if (_cond)							\
++		break;							\
++	printk("%s,%d: assertion failed\n", __FILE__, __LINE__);	\
++	BUG();								\
++} while (0)
++
++struct ag71xx_desc {
++	u32	data;
++	u32	ctrl;
++#define DESC_EMPTY	BIT(31)
++#define DESC_MORE	BIT(24)
++#define DESC_PKTLEN_M	0xfff
++	u32	next;
++	u32	pad;
++} __attribute__((aligned(4)));
++
++struct ag71xx_buf {
++	union {
++		struct sk_buff	*skb;
++		void		*rx_buf;
++	};
++	union {
++		dma_addr_t	dma_addr;
++		unsigned long	timestamp;
++	};
++	unsigned int		len;
++};
++
++struct ag71xx_ring {
++	struct ag71xx_buf	*buf;
++	u8			*descs_cpu;
++	dma_addr_t		descs_dma;
++	u16			desc_split;
++	u16			desc_size;
++	unsigned int		curr;
++	unsigned int		dirty;
++	unsigned int		size;
++};
++
++struct ag71xx_mdio {
++	struct mii_bus		*mii_bus;
++	int			mii_irq[PHY_MAX_ADDR];
++	void __iomem		*mdio_base;
++	struct ag71xx_mdio_platform_data *pdata;
++};
++
++struct ag71xx_int_stats {
++	unsigned long		rx_pr;
++	unsigned long		rx_be;
++	unsigned long		rx_of;
++	unsigned long		tx_ps;
++	unsigned long		tx_be;
++	unsigned long		tx_ur;
++	unsigned long		total;
++};
++
++struct ag71xx_napi_stats {
++	unsigned long		napi_calls;
++	unsigned long		rx_count;
++	unsigned long		rx_packets;
++	unsigned long		rx_packets_max;
++	unsigned long		tx_count;
++	unsigned long		tx_packets;
++	unsigned long		tx_packets_max;
++
++	unsigned long		rx[AG71XX_NAPI_WEIGHT + 1];
++	unsigned long		tx[AG71XX_NAPI_WEIGHT + 1];
++};
++
++struct ag71xx_debug {
++	struct dentry		*debugfs_dir;
++
++	struct ag71xx_int_stats int_stats;
++	struct ag71xx_napi_stats napi_stats;
++};
++
++struct ag71xx {
++	void __iomem		*mac_base;
++
++	spinlock_t		lock;
++	struct platform_device	*pdev;
++	struct net_device	*dev;
++	struct napi_struct	napi;
++	u32			msg_enable;
++
++	struct ag71xx_desc	*stop_desc;
++	dma_addr_t		stop_desc_dma;
++
++	struct ag71xx_ring	rx_ring;
++	struct ag71xx_ring	tx_ring;
++
++	struct mii_bus		*mii_bus;
++	struct phy_device	*phy_dev;
++	void			*phy_priv;
++
++	unsigned int		link;
++	unsigned int		speed;
++	int			duplex;
++
++	unsigned int		max_frame_len;
++	unsigned int		desc_pktlen_mask;
++	unsigned int		rx_buf_size;
++
++	struct work_struct	restart_work;
++	struct delayed_work	link_work;
++	struct timer_list	oom_timer;
++
++#ifdef CONFIG_AG71XX_DEBUG_FS
++	struct ag71xx_debug	debug;
++#endif
++};
++
++extern struct ethtool_ops ag71xx_ethtool_ops;
++void ag71xx_link_adjust(struct ag71xx *ag);
++
++int ag71xx_mdio_driver_init(void) __init;
++void ag71xx_mdio_driver_exit(void);
++
++int ag71xx_phy_connect(struct ag71xx *ag);
++void ag71xx_phy_disconnect(struct ag71xx *ag);
++void ag71xx_phy_start(struct ag71xx *ag);
++void ag71xx_phy_stop(struct ag71xx *ag);
++
++static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag)
++{
++	return ag->pdev->dev.platform_data;
++}
++
++static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
++{
++	return (desc->ctrl & DESC_EMPTY) != 0;
++}
++
++static inline struct ag71xx_desc *
++ag71xx_ring_desc(struct ag71xx_ring *ring, int idx)
++{
++	return (struct ag71xx_desc *) &ring->descs_cpu[idx * ring->desc_size];
++}
++
++/* Register offsets */
++#define AG71XX_REG_MAC_CFG1	0x0000
++#define AG71XX_REG_MAC_CFG2	0x0004
++#define AG71XX_REG_MAC_IPG	0x0008
++#define AG71XX_REG_MAC_HDX	0x000c
++#define AG71XX_REG_MAC_MFL	0x0010
++#define AG71XX_REG_MII_CFG	0x0020
++#define AG71XX_REG_MII_CMD	0x0024
++#define AG71XX_REG_MII_ADDR	0x0028
++#define AG71XX_REG_MII_CTRL	0x002c
++#define AG71XX_REG_MII_STATUS	0x0030
++#define AG71XX_REG_MII_IND	0x0034
++#define AG71XX_REG_MAC_IFCTL	0x0038
++#define AG71XX_REG_MAC_ADDR1	0x0040
++#define AG71XX_REG_MAC_ADDR2	0x0044
++#define AG71XX_REG_FIFO_CFG0	0x0048
++#define AG71XX_REG_FIFO_CFG1	0x004c
++#define AG71XX_REG_FIFO_CFG2	0x0050
++#define AG71XX_REG_FIFO_CFG3	0x0054
++#define AG71XX_REG_FIFO_CFG4	0x0058
++#define AG71XX_REG_FIFO_CFG5	0x005c
++#define AG71XX_REG_FIFO_RAM0	0x0060
++#define AG71XX_REG_FIFO_RAM1	0x0064
++#define AG71XX_REG_FIFO_RAM2	0x0068
++#define AG71XX_REG_FIFO_RAM3	0x006c
++#define AG71XX_REG_FIFO_RAM4	0x0070
++#define AG71XX_REG_FIFO_RAM5	0x0074
++#define AG71XX_REG_FIFO_RAM6	0x0078
++#define AG71XX_REG_FIFO_RAM7	0x007c
++
++#define AG71XX_REG_TX_CTRL	0x0180
++#define AG71XX_REG_TX_DESC	0x0184
++#define AG71XX_REG_TX_STATUS	0x0188
++#define AG71XX_REG_RX_CTRL	0x018c
++#define AG71XX_REG_RX_DESC	0x0190
++#define AG71XX_REG_RX_STATUS	0x0194
++#define AG71XX_REG_INT_ENABLE	0x0198
++#define AG71XX_REG_INT_STATUS	0x019c
++
++#define AG71XX_REG_FIFO_DEPTH	0x01a8
++#define AG71XX_REG_RX_SM	0x01b0
++#define AG71XX_REG_TX_SM	0x01b4
++
++#define MAC_CFG1_TXE		BIT(0)	/* Tx Enable */
++#define MAC_CFG1_STX		BIT(1)	/* Synchronize Tx Enable */
++#define MAC_CFG1_RXE		BIT(2)	/* Rx Enable */
++#define MAC_CFG1_SRX		BIT(3)	/* Synchronize Rx Enable */
++#define MAC_CFG1_TFC		BIT(4)	/* Tx Flow Control Enable */
++#define MAC_CFG1_RFC		BIT(5)	/* Rx Flow Control Enable */
++#define MAC_CFG1_LB		BIT(8)	/* Loopback mode */
++#define MAC_CFG1_SR		BIT(31)	/* Soft Reset */
++
++#define MAC_CFG2_FDX		BIT(0)
++#define MAC_CFG2_CRC_EN		BIT(1)
++#define MAC_CFG2_PAD_CRC_EN	BIT(2)
++#define MAC_CFG2_LEN_CHECK	BIT(4)
++#define MAC_CFG2_HUGE_FRAME_EN	BIT(5)
++#define MAC_CFG2_IF_1000	BIT(9)
++#define MAC_CFG2_IF_10_100	BIT(8)
++
++#define FIFO_CFG0_WTM		BIT(0)	/* Watermark Module */
++#define FIFO_CFG0_RXS		BIT(1)	/* Rx System Module */
++#define FIFO_CFG0_RXF		BIT(2)	/* Rx Fabric Module */
++#define FIFO_CFG0_TXS		BIT(3)	/* Tx System Module */
++#define FIFO_CFG0_TXF		BIT(4)	/* Tx Fabric Module */
++#define FIFO_CFG0_ALL	(FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
++			| FIFO_CFG0_TXS | FIFO_CFG0_TXF)
++
++#define FIFO_CFG0_ENABLE_SHIFT	8
++
++#define FIFO_CFG4_DE		BIT(0)	/* Drop Event */
++#define FIFO_CFG4_DV		BIT(1)	/* RX_DV Event */
++#define FIFO_CFG4_FC		BIT(2)	/* False Carrier */
++#define FIFO_CFG4_CE		BIT(3)	/* Code Error */
++#define FIFO_CFG4_CR		BIT(4)	/* CRC error */
++#define FIFO_CFG4_LM		BIT(5)	/* Length Mismatch */
++#define FIFO_CFG4_LO		BIT(6)	/* Length out of range */
++#define FIFO_CFG4_OK		BIT(7)	/* Packet is OK */
++#define FIFO_CFG4_MC		BIT(8)	/* Multicast Packet */
++#define FIFO_CFG4_BC		BIT(9)	/* Broadcast Packet */
++#define FIFO_CFG4_DR		BIT(10)	/* Dribble */
++#define FIFO_CFG4_LE		BIT(11)	/* Long Event */
++#define FIFO_CFG4_CF		BIT(12)	/* Control Frame */
++#define FIFO_CFG4_PF		BIT(13)	/* Pause Frame */
++#define FIFO_CFG4_UO		BIT(14)	/* Unsupported Opcode */
++#define FIFO_CFG4_VT		BIT(15)	/* VLAN tag detected */
++#define FIFO_CFG4_FT		BIT(16)	/* Frame Truncated */
++#define FIFO_CFG4_UC		BIT(17)	/* Unicast Packet */
++
++#define FIFO_CFG5_DE		BIT(0)	/* Drop Event */
++#define FIFO_CFG5_DV		BIT(1)	/* RX_DV Event */
++#define FIFO_CFG5_FC		BIT(2)	/* False Carrier */
++#define FIFO_CFG5_CE		BIT(3)	/* Code Error */
++#define FIFO_CFG5_LM		BIT(4)	/* Length Mismatch */
++#define FIFO_CFG5_LO		BIT(5)	/* Length Out of Range */
++#define FIFO_CFG5_OK		BIT(6)	/* Packet is OK */
++#define FIFO_CFG5_MC		BIT(7)	/* Multicast Packet */
++#define FIFO_CFG5_BC		BIT(8)	/* Broadcast Packet */
++#define FIFO_CFG5_DR		BIT(9)	/* Dribble */
++#define FIFO_CFG5_CF		BIT(10)	/* Control Frame */
++#define FIFO_CFG5_PF		BIT(11)	/* Pause Frame */
++#define FIFO_CFG5_UO		BIT(12)	/* Unsupported Opcode */
++#define FIFO_CFG5_VT		BIT(13)	/* VLAN tag detected */
++#define FIFO_CFG5_LE		BIT(14)	/* Long Event */
++#define FIFO_CFG5_FT		BIT(15)	/* Frame Truncated */
++#define FIFO_CFG5_16		BIT(16)	/* unknown */
++#define FIFO_CFG5_17		BIT(17)	/* unknown */
++#define FIFO_CFG5_SF		BIT(18)	/* Short Frame */
++#define FIFO_CFG5_BM		BIT(19)	/* Byte Mode */
++
++#define AG71XX_INT_TX_PS	BIT(0)
++#define AG71XX_INT_TX_UR	BIT(1)
++#define AG71XX_INT_TX_BE	BIT(3)
++#define AG71XX_INT_RX_PR	BIT(4)
++#define AG71XX_INT_RX_OF	BIT(6)
++#define AG71XX_INT_RX_BE	BIT(7)
++
++#define MAC_IFCTL_SPEED		BIT(16)
++
++#define MII_CFG_CLK_DIV_4	0
++#define MII_CFG_CLK_DIV_6	2
++#define MII_CFG_CLK_DIV_8	3
++#define MII_CFG_CLK_DIV_10	4
++#define MII_CFG_CLK_DIV_14	5
++#define MII_CFG_CLK_DIV_20	6
++#define MII_CFG_CLK_DIV_28	7
++#define MII_CFG_CLK_DIV_34	8
++#define MII_CFG_CLK_DIV_42	9
++#define MII_CFG_CLK_DIV_50	10
++#define MII_CFG_CLK_DIV_58	11
++#define MII_CFG_CLK_DIV_66	12
++#define MII_CFG_CLK_DIV_74	13
++#define MII_CFG_CLK_DIV_82	14
++#define MII_CFG_CLK_DIV_98	15
++#define MII_CFG_RESET		BIT(31)
++
++#define MII_CMD_WRITE		0x0
++#define MII_CMD_READ		0x1
++#define MII_ADDR_SHIFT		8
++#define MII_IND_BUSY		BIT(0)
++#define MII_IND_INVALID		BIT(2)
++
++#define TX_CTRL_TXE		BIT(0)	/* Tx Enable */
++
++#define TX_STATUS_PS		BIT(0)	/* Packet Sent */
++#define TX_STATUS_UR		BIT(1)	/* Tx Underrun */
++#define TX_STATUS_BE		BIT(3)	/* Bus Error */
++
++#define RX_CTRL_RXE		BIT(0)	/* Rx Enable */
++
++#define RX_STATUS_PR		BIT(0)	/* Packet Received */
++#define RX_STATUS_OF		BIT(2)	/* Rx Overflow */
++#define RX_STATUS_BE		BIT(3)	/* Bus Error */
++
++static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg)
++{
++	switch (reg) {
++	case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
++	case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM:
++	case AG71XX_REG_MII_CFG:
++		break;
++
++	default:
++		BUG();
++	}
++}
++
++static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
++{
++	ag71xx_check_reg_offset(ag, reg);
++
++	__raw_writel(value, ag->mac_base + reg);
++	/* flush write */
++	(void) __raw_readl(ag->mac_base + reg);
++}
++
++static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
++{
++	ag71xx_check_reg_offset(ag, reg);
++
++	return __raw_readl(ag->mac_base + reg);
++}
++
++static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
++{
++	void __iomem *r;
++
++	ag71xx_check_reg_offset(ag, reg);
++
++	r = ag->mac_base + reg;
++	__raw_writel(__raw_readl(r) | mask, r);
++	/* flush write */
++	(void)__raw_readl(r);
++}
++
++static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
++{
++	void __iomem *r;
++
++	ag71xx_check_reg_offset(ag, reg);
++
++	r = ag->mac_base + reg;
++	__raw_writel(__raw_readl(r) & ~mask, r);
++	/* flush write */
++	(void) __raw_readl(r);
++}
++
++static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
++{
++	ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
++}
++
++static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
++{
++	ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
++}
++
++#ifdef CONFIG_AG71XX_AR8216_SUPPORT
++void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
++int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
++				int pktlen);
++static inline int ag71xx_has_ar8216(struct ag71xx *ag)
++{
++	return ag71xx_get_pdata(ag)->has_ar8216;
++}
++#else
++static inline void ag71xx_add_ar8216_header(struct ag71xx *ag,
++					   struct sk_buff *skb)
++{
++}
++
++static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag,
++					      struct sk_buff *skb,
++					      int pktlen)
++{
++	return 0;
++}
++static inline int ag71xx_has_ar8216(struct ag71xx *ag)
++{
++	return 0;
++}
++#endif
++
++#ifdef CONFIG_AG71XX_DEBUG_FS
++int ag71xx_debugfs_root_init(void);
++void ag71xx_debugfs_root_exit(void);
++int ag71xx_debugfs_init(struct ag71xx *ag);
++void ag71xx_debugfs_exit(struct ag71xx *ag);
++void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status);
++void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx);
++#else
++static inline int ag71xx_debugfs_root_init(void) { return 0; }
++static inline void ag71xx_debugfs_root_exit(void) {}
++static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; }
++static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {}
++static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag,
++						   u32 status) {}
++static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag,
++						    int rx, int tx) {}
++#endif /* CONFIG_AG71XX_DEBUG_FS */
++
++void ag71xx_ar7240_start(struct ag71xx *ag);
++void ag71xx_ar7240_stop(struct ag71xx *ag);
++int ag71xx_ar7240_init(struct ag71xx *ag);
++void ag71xx_ar7240_cleanup(struct ag71xx *ag);
++
++int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg);
++void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val);
++
++u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
++		      unsigned reg_addr);
++int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
++		       unsigned reg_addr, u16 reg_val);
++
++#endif /* _AG71XX_H */
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,1406 @@
++/*
++ *  Atheros AR71xx built-in ethernet mac driver
++ *
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Based on Atheros' AG7100 driver
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++#define AG71XX_DEFAULT_MSG_ENABLE	\
++	(NETIF_MSG_DRV			\
++	| NETIF_MSG_PROBE		\
++	| NETIF_MSG_LINK		\
++	| NETIF_MSG_TIMER		\
++	| NETIF_MSG_IFDOWN		\
++	| NETIF_MSG_IFUP		\
++	| NETIF_MSG_RX_ERR		\
++	| NETIF_MSG_TX_ERR)
++
++static int ag71xx_msg_level = -1;
++
++module_param_named(msg_level, ag71xx_msg_level, int, 0);
++MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
++
++#define ETH_SWITCH_HEADER_LEN	2
++
++static inline unsigned int ag71xx_max_frame_len(unsigned int mtu)
++{
++	return ETH_SWITCH_HEADER_LEN + ETH_HLEN + VLAN_HLEN + mtu + ETH_FCS_LEN;
++}
++
++static void ag71xx_dump_dma_regs(struct ag71xx *ag)
++{
++	DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n",
++		ag->dev->name,
++		ag71xx_rr(ag, AG71XX_REG_TX_CTRL),
++		ag71xx_rr(ag, AG71XX_REG_TX_DESC),
++		ag71xx_rr(ag, AG71XX_REG_TX_STATUS));
++
++	DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n",
++		ag->dev->name,
++		ag71xx_rr(ag, AG71XX_REG_RX_CTRL),
++		ag71xx_rr(ag, AG71XX_REG_RX_DESC),
++		ag71xx_rr(ag, AG71XX_REG_RX_STATUS));
++}
++
++static void ag71xx_dump_regs(struct ag71xx *ag)
++{
++	DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n",
++		ag->dev->name,
++		ag71xx_rr(ag, AG71XX_REG_MAC_CFG1),
++		ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
++		ag71xx_rr(ag, AG71XX_REG_MAC_IPG),
++		ag71xx_rr(ag, AG71XX_REG_MAC_HDX),
++		ag71xx_rr(ag, AG71XX_REG_MAC_MFL));
++	DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n",
++		ag->dev->name,
++		ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
++		ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1),
++		ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2));
++	DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n",
++		ag->dev->name,
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
++	DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n",
++		ag->dev->name,
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
++}
++
++static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr)
++{
++	DBG("%s: %s intr=%08x %s%s%s%s%s%s\n",
++		ag->dev->name, label, intr,
++		(intr & AG71XX_INT_TX_PS) ? "TXPS " : "",
++		(intr & AG71XX_INT_TX_UR) ? "TXUR " : "",
++		(intr & AG71XX_INT_TX_BE) ? "TXBE " : "",
++		(intr & AG71XX_INT_RX_PR) ? "RXPR " : "",
++		(intr & AG71XX_INT_RX_OF) ? "RXOF " : "",
++		(intr & AG71XX_INT_RX_BE) ? "RXBE " : "");
++}
++
++static void ag71xx_ring_free(struct ag71xx_ring *ring)
++{
++	kfree(ring->buf);
++
++	if (ring->descs_cpu)
++		dma_free_coherent(NULL, ring->size * ring->desc_size,
++				  ring->descs_cpu, ring->descs_dma);
++}
++
++static int ag71xx_ring_alloc(struct ag71xx_ring *ring)
++{
++	int err;
++
++	ring->desc_size = sizeof(struct ag71xx_desc);
++	if (ring->desc_size % cache_line_size()) {
++		DBG("ag71xx: ring %p, desc size %u rounded to %u\n",
++			ring, ring->desc_size,
++			roundup(ring->desc_size, cache_line_size()));
++		ring->desc_size = roundup(ring->desc_size, cache_line_size());
++	}
++
++	ring->descs_cpu = dma_alloc_coherent(NULL, ring->size * ring->desc_size,
++					     &ring->descs_dma, GFP_ATOMIC);
++	if (!ring->descs_cpu) {
++		err = -ENOMEM;
++		goto err;
++	}
++
++
++	ring->buf = kzalloc(ring->size * sizeof(*ring->buf), GFP_KERNEL);
++	if (!ring->buf) {
++		err = -ENOMEM;
++		goto err;
++	}
++
++	return 0;
++
++err:
++	return err;
++}
++
++static void ag71xx_ring_tx_clean(struct ag71xx *ag)
++{
++	struct ag71xx_ring *ring = &ag->tx_ring;
++	struct net_device *dev = ag->dev;
++	u32 bytes_compl = 0, pkts_compl = 0;
++
++	while (ring->curr != ring->dirty) {
++		struct ag71xx_desc *desc;
++		u32 i = ring->dirty % ring->size;
++
++		desc = ag71xx_ring_desc(ring, i);
++		if (!ag71xx_desc_empty(desc)) {
++			desc->ctrl = 0;
++			dev->stats.tx_errors++;
++		}
++
++		if (ring->buf[i].skb) {
++			bytes_compl += ring->buf[i].len;
++			pkts_compl++;
++			dev_kfree_skb_any(ring->buf[i].skb);
++		}
++		ring->buf[i].skb = NULL;
++		ring->dirty++;
++	}
++
++	/* flush descriptors */
++	wmb();
++
++	netdev_completed_queue(dev, pkts_compl, bytes_compl);
++}
++
++static void ag71xx_ring_tx_init(struct ag71xx *ag)
++{
++	struct ag71xx_ring *ring = &ag->tx_ring;
++	int i;
++
++	for (i = 0; i < ring->size; i++) {
++		struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
++
++		desc->next = (u32) (ring->descs_dma +
++			ring->desc_size * ((i + 1) % ring->size));
++
++		desc->ctrl = DESC_EMPTY;
++		ring->buf[i].skb = NULL;
++	}
++
++	/* flush descriptors */
++	wmb();
++
++	ring->curr = 0;
++	ring->dirty = 0;
++	netdev_reset_queue(ag->dev);
++}
++
++static void ag71xx_ring_rx_clean(struct ag71xx *ag)
++{
++	struct ag71xx_ring *ring = &ag->rx_ring;
++	int i;
++
++	if (!ring->buf)
++		return;
++
++	for (i = 0; i < ring->size; i++)
++		if (ring->buf[i].rx_buf) {
++			dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr,
++					 ag->rx_buf_size, DMA_FROM_DEVICE);
++			kfree(ring->buf[i].rx_buf);
++		}
++}
++
++static int ag71xx_buffer_offset(struct ag71xx *ag)
++{
++	int offset = NET_SKB_PAD;
++
++	/*
++	 * On AR71xx/AR91xx packets must be 4-byte aligned.
++	 *
++	 * When using builtin AR8216 support, hardware adds a 2-byte header,
++	 * so we don't need any extra alignment in that case.
++	 */
++	if (!ag71xx_get_pdata(ag)->is_ar724x || ag71xx_has_ar8216(ag))
++		return offset;
++
++	return offset + NET_IP_ALIGN;
++}
++
++static bool ag71xx_fill_rx_buf(struct ag71xx *ag, struct ag71xx_buf *buf,
++			       int offset)
++{
++	struct ag71xx_ring *ring = &ag->rx_ring;
++	struct ag71xx_desc *desc = ag71xx_ring_desc(ring, buf - &ring->buf[0]);
++	void *data;
++
++	data = kmalloc(ag->rx_buf_size +
++		       SKB_DATA_ALIGN(sizeof(struct skb_shared_info)),
++		       GFP_ATOMIC);
++	if (!data)
++		return false;
++
++	buf->rx_buf = data;
++	buf->dma_addr = dma_map_single(&ag->dev->dev, data, ag->rx_buf_size,
++				       DMA_FROM_DEVICE);
++	desc->data = (u32) buf->dma_addr + offset;
++	return true;
++}
++
++static int ag71xx_ring_rx_init(struct ag71xx *ag)
++{
++	struct ag71xx_ring *ring = &ag->rx_ring;
++	unsigned int i;
++	int ret;
++	int offset = ag71xx_buffer_offset(ag);
++
++	ret = 0;
++	for (i = 0; i < ring->size; i++) {
++		struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
++
++		desc->next = (u32) (ring->descs_dma +
++			ring->desc_size * ((i + 1) % ring->size));
++
++		DBG("ag71xx: RX desc at %p, next is %08x\n",
++			desc, desc->next);
++	}
++
++	for (i = 0; i < ring->size; i++) {
++		struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
++
++		if (!ag71xx_fill_rx_buf(ag, &ring->buf[i], offset)) {
++			ret = -ENOMEM;
++			break;
++		}
++
++		desc->ctrl = DESC_EMPTY;
++	}
++
++	/* flush descriptors */
++	wmb();
++
++	ring->curr = 0;
++	ring->dirty = 0;
++
++	return ret;
++}
++
++static int ag71xx_ring_rx_refill(struct ag71xx *ag)
++{
++	struct ag71xx_ring *ring = &ag->rx_ring;
++	unsigned int count;
++	int offset = ag71xx_buffer_offset(ag);
++
++	count = 0;
++	for (; ring->curr - ring->dirty > 0; ring->dirty++) {
++		struct ag71xx_desc *desc;
++		unsigned int i;
++
++		i = ring->dirty % ring->size;
++		desc = ag71xx_ring_desc(ring, i);
++
++		if (!ring->buf[i].rx_buf &&
++		    !ag71xx_fill_rx_buf(ag, &ring->buf[i], offset))
++			break;
++
++		desc->ctrl = DESC_EMPTY;
++		count++;
++	}
++
++	/* flush descriptors */
++	wmb();
++
++	DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count);
++
++	return count;
++}
++
++static int ag71xx_rings_init(struct ag71xx *ag)
++{
++	int ret;
++
++	ret = ag71xx_ring_alloc(&ag->tx_ring);
++	if (ret)
++		return ret;
++
++	ag71xx_ring_tx_init(ag);
++
++	ret = ag71xx_ring_alloc(&ag->rx_ring);
++	if (ret)
++		return ret;
++
++	ret = ag71xx_ring_rx_init(ag);
++	return ret;
++}
++
++static void ag71xx_rings_cleanup(struct ag71xx *ag)
++{
++	ag71xx_ring_rx_clean(ag);
++	ag71xx_ring_free(&ag->rx_ring);
++
++	ag71xx_ring_tx_clean(ag);
++	netdev_reset_queue(ag->dev);
++	ag71xx_ring_free(&ag->tx_ring);
++}
++
++static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
++{
++	switch (ag->speed) {
++	case SPEED_1000:
++		return "1000";
++	case SPEED_100:
++		return "100";
++	case SPEED_10:
++		return "10";
++	}
++
++	return "?";
++}
++
++static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
++{
++	u32 t;
++
++	t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16)
++	  | (((u32) mac[3]) << 8) | ((u32) mac[2]);
++
++	ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
++
++	t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16);
++	ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
++}
++
++static void ag71xx_dma_reset(struct ag71xx *ag)
++{
++	u32 val;
++	int i;
++
++	ag71xx_dump_dma_regs(ag);
++
++	/* stop RX and TX */
++	ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
++	ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
++
++	/*
++	 * give the hardware some time to really stop all rx/tx activity
++	 * clearing the descriptors too early causes random memory corruption
++	 */
++	mdelay(1);
++
++	/* clear descriptor addresses */
++	ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma);
++	ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma);
++
++	/* clear pending RX/TX interrupts */
++	for (i = 0; i < 256; i++) {
++		ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
++		ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
++	}
++
++	/* clear pending errors */
++	ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
++	ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
++
++	val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
++	if (val)
++		pr_alert("%s: unable to clear DMA Rx status: %08x\n",
++			 ag->dev->name, val);
++
++	val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
++
++	/* mask out reserved bits */
++	val &= ~0xff000000;
++
++	if (val)
++		pr_alert("%s: unable to clear DMA Tx status: %08x\n",
++			 ag->dev->name, val);
++
++	ag71xx_dump_dma_regs(ag);
++}
++
++#define MAC_CFG1_INIT	(MAC_CFG1_RXE | MAC_CFG1_TXE | \
++			 MAC_CFG1_SRX | MAC_CFG1_STX)
++
++#define FIFO_CFG0_INIT	(FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
++
++#define FIFO_CFG4_INIT	(FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
++			 FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
++			 FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
++			 FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
++			 FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
++			 FIFO_CFG4_VT)
++
++#define FIFO_CFG5_INIT	(FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
++			 FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
++			 FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
++			 FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
++			 FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
++			 FIFO_CFG5_17 | FIFO_CFG5_SF)
++
++static void ag71xx_hw_stop(struct ag71xx *ag)
++{
++	/* disable all interrupts and stop the rx/tx engine */
++	ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0);
++	ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
++	ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
++}
++
++static void ag71xx_hw_setup(struct ag71xx *ag)
++{
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++	/* setup MAC configuration registers */
++	ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT);
++
++	ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
++		  MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
++
++	/* setup max frame length to zero */
++	ag71xx_wr(ag, AG71XX_REG_MAC_MFL, 0);
++
++	/* setup FIFO configuration registers */
++	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
++	if (pdata->is_ar724x) {
++		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1);
++		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2);
++	} else {
++		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000);
++		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff);
++	}
++	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
++	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
++}
++
++static void ag71xx_hw_init(struct ag71xx *ag)
++{
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++	u32 reset_mask = pdata->reset_bit;
++
++	ag71xx_hw_stop(ag);
++
++	if (pdata->is_ar724x) {
++		u32 reset_phy = reset_mask;
++
++		reset_phy &= AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY;
++		reset_mask &= ~(AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY);
++
++		ath79_device_reset_set(reset_phy);
++		msleep(50);
++		ath79_device_reset_clear(reset_phy);
++		msleep(200);
++	}
++
++	ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
++	udelay(20);
++
++	ath79_device_reset_set(reset_mask);
++	msleep(100);
++	ath79_device_reset_clear(reset_mask);
++	msleep(200);
++
++	ag71xx_hw_setup(ag);
++
++	ag71xx_dma_reset(ag);
++}
++
++static void ag71xx_fast_reset(struct ag71xx *ag)
++{
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++	struct net_device *dev = ag->dev;
++	u32 reset_mask = pdata->reset_bit;
++	u32 rx_ds, tx_ds;
++	u32 mii_reg;
++
++	reset_mask &= AR71XX_RESET_GE0_MAC | AR71XX_RESET_GE1_MAC;
++
++	mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG);
++	rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC);
++	tx_ds = ag71xx_rr(ag, AG71XX_REG_TX_DESC);
++
++	ath79_device_reset_set(reset_mask);
++	udelay(10);
++	ath79_device_reset_clear(reset_mask);
++	udelay(10);
++
++	ag71xx_dma_reset(ag);
++	ag71xx_hw_setup(ag);
++
++	/* setup max frame length */
++	ag71xx_wr(ag, AG71XX_REG_MAC_MFL,
++		  ag71xx_max_frame_len(ag->dev->mtu));
++
++	ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds);
++	ag71xx_wr(ag, AG71XX_REG_TX_DESC, tx_ds);
++	ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg);
++
++	ag71xx_hw_set_macaddr(ag, dev->dev_addr);
++}
++
++static void ag71xx_hw_start(struct ag71xx *ag)
++{
++	/* start RX engine */
++	ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
++
++	/* enable interrupts */
++	ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT);
++}
++
++void ag71xx_link_adjust(struct ag71xx *ag)
++{
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++	u32 cfg2;
++	u32 ifctl;
++	u32 fifo5;
++	u32 fifo3;
++
++	if (!ag->link) {
++		ag71xx_hw_stop(ag);
++		netif_carrier_off(ag->dev);
++		if (netif_msg_link(ag))
++			pr_info("%s: link down\n", ag->dev->name);
++		return;
++	}
++
++	if (pdata->is_ar724x)
++		ag71xx_fast_reset(ag);
++
++	cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
++	cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
++	cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
++
++	ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
++	ifctl &= ~(MAC_IFCTL_SPEED);
++
++	fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
++	fifo5 &= ~FIFO_CFG5_BM;
++
++	switch (ag->speed) {
++	case SPEED_1000:
++		cfg2 |= MAC_CFG2_IF_1000;
++		fifo5 |= FIFO_CFG5_BM;
++		break;
++	case SPEED_100:
++		cfg2 |= MAC_CFG2_IF_10_100;
++		ifctl |= MAC_IFCTL_SPEED;
++		break;
++	case SPEED_10:
++		cfg2 |= MAC_CFG2_IF_10_100;
++		break;
++	default:
++		BUG();
++		return;
++	}
++
++	if (pdata->is_ar91xx)
++		fifo3 = 0x00780fff;
++	else if (pdata->is_ar724x)
++		fifo3 = pdata->fifo_cfg3;
++	else
++		fifo3 = 0x008001ff;
++
++	if (ag->tx_ring.desc_split) {
++		fifo3 &= 0xffff;
++		fifo3 |= ((2048 - ag->tx_ring.desc_split) / 4) << 16;
++	}
++
++	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, fifo3);
++
++	if (pdata->set_speed)
++		pdata->set_speed(ag->speed);
++
++	ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
++	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
++	ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
++	ag71xx_hw_start(ag);
++
++	netif_carrier_on(ag->dev);
++	if (netif_msg_link(ag))
++		pr_info("%s: link up (%sMbps/%s duplex)\n",
++			ag->dev->name,
++			ag71xx_speed_str(ag),
++			(DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
++
++	DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
++		ag->dev->name,
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
++
++	DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
++		ag->dev->name,
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
++		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
++
++	DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x\n",
++		ag->dev->name,
++		ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
++		ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL));
++}
++
++static int ag71xx_open(struct net_device *dev)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++	unsigned int max_frame_len;
++	int ret;
++
++	max_frame_len = ag71xx_max_frame_len(dev->mtu);
++	ag->rx_buf_size = max_frame_len + NET_SKB_PAD + NET_IP_ALIGN;
++
++	/* setup max frame length */
++	ag71xx_wr(ag, AG71XX_REG_MAC_MFL, max_frame_len);
++
++	ret = ag71xx_rings_init(ag);
++	if (ret)
++		goto err;
++
++	napi_enable(&ag->napi);
++
++	netif_carrier_off(dev);
++	ag71xx_phy_start(ag);
++
++	ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
++	ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma);
++
++	ag71xx_hw_set_macaddr(ag, dev->dev_addr);
++
++	netif_start_queue(dev);
++
++	return 0;
++
++err:
++	ag71xx_rings_cleanup(ag);
++	return ret;
++}
++
++static int ag71xx_stop(struct net_device *dev)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++	unsigned long flags;
++
++	netif_carrier_off(dev);
++	ag71xx_phy_stop(ag);
++
++	spin_lock_irqsave(&ag->lock, flags);
++
++	netif_stop_queue(dev);
++
++	ag71xx_hw_stop(ag);
++	ag71xx_dma_reset(ag);
++
++	napi_disable(&ag->napi);
++	del_timer_sync(&ag->oom_timer);
++
++	spin_unlock_irqrestore(&ag->lock, flags);
++
++	ag71xx_rings_cleanup(ag);
++
++	return 0;
++}
++
++static int ag71xx_fill_dma_desc(struct ag71xx_ring *ring, u32 addr, int len)
++{
++	int i;
++	struct ag71xx_desc *desc;
++	int ndesc = 0;
++	int split = ring->desc_split;
++
++	if (!split)
++		split = len;
++
++	while (len > 0) {
++		unsigned int cur_len = len;
++
++		i = (ring->curr + ndesc) % ring->size;
++		desc = ag71xx_ring_desc(ring, i);
++
++		if (!ag71xx_desc_empty(desc))
++			return -1;
++
++		if (cur_len > split) {
++			cur_len = split;
++
++			/*
++			 * TX will hang if DMA transfers <= 4 bytes,
++			 * make sure next segment is more than 4 bytes long.
++			 */
++			if (len <= split + 4)
++				cur_len -= 4;
++		}
++
++		desc->data = addr;
++		addr += cur_len;
++		len -= cur_len;
++
++		if (len > 0)
++			cur_len |= DESC_MORE;
++
++		/* prevent early tx attempt of this descriptor */
++		if (!ndesc)
++			cur_len |= DESC_EMPTY;
++
++		desc->ctrl = cur_len;
++		ndesc++;
++	}
++
++	return ndesc;
++}
++
++static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb,
++					  struct net_device *dev)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++	struct ag71xx_ring *ring = &ag->tx_ring;
++	struct ag71xx_desc *desc;
++	dma_addr_t dma_addr;
++	int i, n, ring_min;
++
++	if (ag71xx_has_ar8216(ag))
++		ag71xx_add_ar8216_header(ag, skb);
++
++	if (skb->len <= 4) {
++		DBG("%s: packet len is too small\n", ag->dev->name);
++		goto err_drop;
++	}
++
++	dma_addr = dma_map_single(&dev->dev, skb->data, skb->len,
++				  DMA_TO_DEVICE);
++
++	i = ring->curr % ring->size;
++	desc = ag71xx_ring_desc(ring, i);
++
++	/* setup descriptor fields */
++	n = ag71xx_fill_dma_desc(ring, (u32) dma_addr, skb->len & ag->desc_pktlen_mask);
++	if (n < 0)
++		goto err_drop_unmap;
++
++	i = (ring->curr + n - 1) % ring->size;
++	ring->buf[i].len = skb->len;
++	ring->buf[i].skb = skb;
++	ring->buf[i].timestamp = jiffies;
++
++	netdev_sent_queue(dev, skb->len);
++
++	desc->ctrl &= ~DESC_EMPTY;
++	ring->curr += n;
++
++	/* flush descriptor */
++	wmb();
++
++	ring_min = 2;
++	if (ring->desc_split)
++	    ring_min *= AG71XX_TX_RING_DS_PER_PKT;
++
++	if (ring->curr - ring->dirty >= ring->size - ring_min) {
++		DBG("%s: tx queue full\n", dev->name);
++		netif_stop_queue(dev);
++	}
++
++	DBG("%s: packet injected into TX queue\n", ag->dev->name);
++
++	/* enable TX engine */
++	ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
++
++	return NETDEV_TX_OK;
++
++err_drop_unmap:
++	dma_unmap_single(&dev->dev, dma_addr, skb->len, DMA_TO_DEVICE);
++
++err_drop:
++	dev->stats.tx_dropped++;
++
++	dev_kfree_skb(skb);
++	return NETDEV_TX_OK;
++}
++
++static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++	int ret;
++
++	switch (cmd) {
++	case SIOCETHTOOL:
++		if (ag->phy_dev == NULL)
++			break;
++
++		spin_lock_irq(&ag->lock);
++		ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data);
++		spin_unlock_irq(&ag->lock);
++		return ret;
++
++	case SIOCSIFHWADDR:
++		if (copy_from_user
++			(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
++			return -EFAULT;
++		return 0;
++
++	case SIOCGIFHWADDR:
++		if (copy_to_user
++			(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
++			return -EFAULT;
++		return 0;
++
++	case SIOCGMIIPHY:
++	case SIOCGMIIREG:
++	case SIOCSMIIREG:
++		if (ag->phy_dev == NULL)
++			break;
++
++		return phy_mii_ioctl(ag->phy_dev, ifr, cmd);
++
++	default:
++		break;
++	}
++
++	return -EOPNOTSUPP;
++}
++
++static void ag71xx_oom_timer_handler(unsigned long data)
++{
++	struct net_device *dev = (struct net_device *) data;
++	struct ag71xx *ag = netdev_priv(dev);
++
++	napi_schedule(&ag->napi);
++}
++
++static void ag71xx_tx_timeout(struct net_device *dev)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++
++	if (netif_msg_tx_err(ag))
++		pr_info("%s: tx timeout\n", ag->dev->name);
++
++	schedule_work(&ag->restart_work);
++}
++
++static void ag71xx_restart_work_func(struct work_struct *work)
++{
++	struct ag71xx *ag = container_of(work, struct ag71xx, restart_work);
++
++	if (ag71xx_get_pdata(ag)->is_ar724x) {
++		ag->link = 0;
++		ag71xx_link_adjust(ag);
++		return;
++	}
++
++	ag71xx_stop(ag->dev);
++	ag71xx_open(ag->dev);
++}
++
++static bool ag71xx_check_dma_stuck(struct ag71xx *ag, unsigned long timestamp)
++{
++	u32 rx_sm, tx_sm, rx_fd;
++
++	if (likely(time_before(jiffies, timestamp + HZ/10)))
++		return false;
++
++	if (!netif_carrier_ok(ag->dev))
++		return false;
++
++	rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM);
++	if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6)
++		return true;
++
++	tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM);
++	rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH);
++	if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) &&
++	    ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0)
++		return true;
++
++	return false;
++}
++
++static int ag71xx_tx_packets(struct ag71xx *ag)
++{
++	struct ag71xx_ring *ring = &ag->tx_ring;
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++	int sent = 0;
++	int bytes_compl = 0;
++	int n = 0;
++
++	DBG("%s: processing TX ring\n", ag->dev->name);
++
++	while (ring->dirty + n != ring->curr) {
++		unsigned int i = (ring->dirty + n) % ring->size;
++		struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
++		struct sk_buff *skb = ring->buf[i].skb;
++
++		if (!ag71xx_desc_empty(desc)) {
++			if (pdata->is_ar7240 &&
++			    ag71xx_check_dma_stuck(ag, ring->buf[i].timestamp))
++				schedule_work(&ag->restart_work);
++			break;
++		}
++
++		n++;
++		if (!skb)
++			continue;
++
++		dev_kfree_skb_any(skb);
++		ring->buf[i].skb = NULL;
++
++		bytes_compl += ring->buf[i].len;
++
++		sent++;
++		ring->dirty += n;
++
++		while (n > 0) {
++			ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
++			n--;
++		}
++	}
++
++	DBG("%s: %d packets sent out\n", ag->dev->name, sent);
++
++	ag->dev->stats.tx_bytes += bytes_compl;
++	ag->dev->stats.tx_packets += sent;
++
++	if (!sent)
++		return 0;
++
++	netdev_completed_queue(ag->dev, sent, bytes_compl);
++	if ((ring->curr - ring->dirty) < (ring->size * 3) / 4)
++		netif_wake_queue(ag->dev);
++
++	return sent;
++}
++
++static int ag71xx_rx_packets(struct ag71xx *ag, int limit)
++{
++	struct net_device *dev = ag->dev;
++	struct ag71xx_ring *ring = &ag->rx_ring;
++	int offset = ag71xx_buffer_offset(ag);
++	unsigned int pktlen_mask = ag->desc_pktlen_mask;
++	int done = 0;
++
++	DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n",
++			dev->name, limit, ring->curr, ring->dirty);
++
++	while (done < limit) {
++		unsigned int i = ring->curr % ring->size;
++		struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
++		struct sk_buff *skb;
++		int pktlen;
++		int err = 0;
++
++		if (ag71xx_desc_empty(desc))
++			break;
++
++		if ((ring->dirty + ring->size) == ring->curr) {
++			ag71xx_assert(0);
++			break;
++		}
++
++		ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
++
++		pktlen = desc->ctrl & pktlen_mask;
++		pktlen -= ETH_FCS_LEN;
++
++		dma_unmap_single(&dev->dev, ring->buf[i].dma_addr,
++				 ag->rx_buf_size, DMA_FROM_DEVICE);
++
++		dev->stats.rx_packets++;
++		dev->stats.rx_bytes += pktlen;
++
++		skb = build_skb(ring->buf[i].rx_buf, 0);
++		if (!skb) {
++			kfree(ring->buf[i].rx_buf);
++			goto next;
++		}
++
++		skb_reserve(skb, offset);
++		skb_put(skb, pktlen);
++
++		if (ag71xx_has_ar8216(ag))
++			err = ag71xx_remove_ar8216_header(ag, skb, pktlen);
++
++		if (err) {
++			dev->stats.rx_dropped++;
++			kfree_skb(skb);
++		} else {
++			skb->dev = dev;
++			skb->ip_summed = CHECKSUM_NONE;
++			skb->protocol = eth_type_trans(skb, dev);
++			netif_receive_skb(skb);
++		}
++
++next:
++		ring->buf[i].rx_buf = NULL;
++		done++;
++
++		ring->curr++;
++	}
++
++	ag71xx_ring_rx_refill(ag);
++
++	DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n",
++		dev->name, ring->curr, ring->dirty, done);
++
++	return done;
++}
++
++static int ag71xx_poll(struct napi_struct *napi, int limit)
++{
++	struct ag71xx *ag = container_of(napi, struct ag71xx, napi);
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++	struct net_device *dev = ag->dev;
++	struct ag71xx_ring *rx_ring;
++	unsigned long flags;
++	u32 status;
++	int tx_done;
++	int rx_done;
++
++	pdata->ddr_flush();
++	tx_done = ag71xx_tx_packets(ag);
++
++	DBG("%s: processing RX ring\n", dev->name);
++	rx_done = ag71xx_rx_packets(ag, limit);
++
++	ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done);
++
++	rx_ring = &ag->rx_ring;
++	if (rx_ring->buf[rx_ring->dirty % rx_ring->size].rx_buf == NULL)
++		goto oom;
++
++	status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
++	if (unlikely(status & RX_STATUS_OF)) {
++		ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF);
++		dev->stats.rx_fifo_errors++;
++
++		/* restart RX */
++		ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
++	}
++
++	if (rx_done < limit) {
++		if (status & RX_STATUS_PR)
++			goto more;
++
++		status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
++		if (status & TX_STATUS_PS)
++			goto more;
++
++		DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n",
++			dev->name, rx_done, tx_done, limit);
++
++		napi_complete(napi);
++
++		/* enable interrupts */
++		spin_lock_irqsave(&ag->lock, flags);
++		ag71xx_int_enable(ag, AG71XX_INT_POLL);
++		spin_unlock_irqrestore(&ag->lock, flags);
++		return rx_done;
++	}
++
++more:
++	DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n",
++			dev->name, rx_done, tx_done, limit);
++	return limit;
++
++oom:
++	if (netif_msg_rx_err(ag))
++		pr_info("%s: out of memory\n", dev->name);
++
++	mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL);
++	napi_complete(napi);
++	return 0;
++}
++
++static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
++{
++	struct net_device *dev = dev_id;
++	struct ag71xx *ag = netdev_priv(dev);
++	u32 status;
++
++	status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS);
++	ag71xx_dump_intr(ag, "raw", status);
++
++	if (unlikely(!status))
++		return IRQ_NONE;
++
++	if (unlikely(status & AG71XX_INT_ERR)) {
++		if (status & AG71XX_INT_TX_BE) {
++			ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE);
++			dev_err(&dev->dev, "TX BUS error\n");
++		}
++		if (status & AG71XX_INT_RX_BE) {
++			ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE);
++			dev_err(&dev->dev, "RX BUS error\n");
++		}
++	}
++
++	if (likely(status & AG71XX_INT_POLL)) {
++		ag71xx_int_disable(ag, AG71XX_INT_POLL);
++		DBG("%s: enable polling mode\n", dev->name);
++		napi_schedule(&ag->napi);
++	}
++
++	ag71xx_debugfs_update_int_stats(ag, status);
++
++	return IRQ_HANDLED;
++}
++
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/*
++ * Polling 'interrupt' - used by things like netconsole to send skbs
++ * without having to re-enable interrupts. It's not called while
++ * the interrupt routine is executing.
++ */
++static void ag71xx_netpoll(struct net_device *dev)
++{
++	disable_irq(dev->irq);
++	ag71xx_interrupt(dev->irq, dev);
++	enable_irq(dev->irq);
++}
++#endif
++
++static int ag71xx_change_mtu(struct net_device *dev, int new_mtu)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++	unsigned int max_frame_len;
++
++	max_frame_len = ag71xx_max_frame_len(new_mtu);
++	if (new_mtu < 68 || max_frame_len > ag->max_frame_len)
++		return -EINVAL;
++
++	if (netif_running(dev))
++		return -EBUSY;
++
++	dev->mtu = new_mtu;
++	return 0;
++}
++
++static const struct net_device_ops ag71xx_netdev_ops = {
++	.ndo_open		= ag71xx_open,
++	.ndo_stop		= ag71xx_stop,
++	.ndo_start_xmit		= ag71xx_hard_start_xmit,
++	.ndo_do_ioctl		= ag71xx_do_ioctl,
++	.ndo_tx_timeout		= ag71xx_tx_timeout,
++	.ndo_change_mtu		= ag71xx_change_mtu,
++	.ndo_set_mac_address	= eth_mac_addr,
++	.ndo_validate_addr	= eth_validate_addr,
++#ifdef CONFIG_NET_POLL_CONTROLLER
++	.ndo_poll_controller	= ag71xx_netpoll,
++#endif
++};
++
++static const char *ag71xx_get_phy_if_mode_name(phy_interface_t mode)
++{
++	switch (mode) {
++	case PHY_INTERFACE_MODE_MII:
++		return "MII";
++	case PHY_INTERFACE_MODE_GMII:
++		return "GMII";
++	case PHY_INTERFACE_MODE_RMII:
++		return "RMII";
++	case PHY_INTERFACE_MODE_RGMII:
++		return "RGMII";
++	case PHY_INTERFACE_MODE_SGMII:
++		return "SGMII";
++	default:
++		break;
++	}
++
++	return "unknown";
++}
++
++
++static int ag71xx_probe(struct platform_device *pdev)
++{
++	struct net_device *dev;
++	struct resource *res;
++	struct ag71xx *ag;
++	struct ag71xx_platform_data *pdata;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata) {
++		dev_err(&pdev->dev, "no platform data specified\n");
++		err = -ENXIO;
++		goto err_out;
++	}
++
++	if (pdata->mii_bus_dev == NULL && pdata->phy_mask) {
++		dev_err(&pdev->dev, "no MII bus device specified\n");
++		err = -EINVAL;
++		goto err_out;
++	}
++
++	dev = alloc_etherdev(sizeof(*ag));
++	if (!dev) {
++		dev_err(&pdev->dev, "alloc_etherdev failed\n");
++		err = -ENOMEM;
++		goto err_out;
++	}
++
++	if (!pdata->max_frame_len || !pdata->desc_pktlen_mask)
++		return -EINVAL;
++
++	SET_NETDEV_DEV(dev, &pdev->dev);
++
++	ag = netdev_priv(dev);
++	ag->pdev = pdev;
++	ag->dev = dev;
++	ag->msg_enable = netif_msg_init(ag71xx_msg_level,
++					AG71XX_DEFAULT_MSG_ENABLE);
++	spin_lock_init(&ag->lock);
++
++	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base");
++	if (!res) {
++		dev_err(&pdev->dev, "no mac_base resource found\n");
++		err = -ENXIO;
++		goto err_out;
++	}
++
++	ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1);
++	if (!ag->mac_base) {
++		dev_err(&pdev->dev, "unable to ioremap mac_base\n");
++		err = -ENOMEM;
++		goto err_free_dev;
++	}
++
++	dev->irq = platform_get_irq(pdev, 0);
++	err = request_irq(dev->irq, ag71xx_interrupt,
++			  0x0,
++			  dev->name, dev);
++	if (err) {
++		dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq);
++		goto err_unmap_base;
++	}
++
++	dev->base_addr = (unsigned long)ag->mac_base;
++	dev->netdev_ops = &ag71xx_netdev_ops;
++	dev->ethtool_ops = &ag71xx_ethtool_ops;
++
++	INIT_WORK(&ag->restart_work, ag71xx_restart_work_func);
++
++	init_timer(&ag->oom_timer);
++	ag->oom_timer.data = (unsigned long) dev;
++	ag->oom_timer.function = ag71xx_oom_timer_handler;
++
++	ag->tx_ring.size = AG71XX_TX_RING_SIZE_DEFAULT;
++	ag->rx_ring.size = AG71XX_RX_RING_SIZE_DEFAULT;
++
++	ag->max_frame_len = pdata->max_frame_len;
++	ag->desc_pktlen_mask = pdata->desc_pktlen_mask;
++
++	if (!pdata->is_ar724x && !pdata->is_ar91xx) {
++		ag->tx_ring.desc_split = AG71XX_TX_RING_SPLIT;
++		ag->tx_ring.size *= AG71XX_TX_RING_DS_PER_PKT;
++	}
++
++	ag->stop_desc = dma_alloc_coherent(NULL,
++		sizeof(struct ag71xx_desc), &ag->stop_desc_dma, GFP_KERNEL);
++
++	if (!ag->stop_desc)
++		goto err_free_irq;
++
++	ag->stop_desc->data = 0;
++	ag->stop_desc->ctrl = 0;
++	ag->stop_desc->next = (u32) ag->stop_desc_dma;
++
++	memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN);
++
++	netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT);
++
++	ag71xx_dump_regs(ag);
++
++	ag71xx_hw_init(ag);
++
++	ag71xx_dump_regs(ag);
++
++	err = ag71xx_phy_connect(ag);
++	if (err)
++		goto err_free_desc;
++
++	err = ag71xx_debugfs_init(ag);
++	if (err)
++		goto err_phy_disconnect;
++
++	platform_set_drvdata(pdev, dev);
++
++	err = register_netdev(dev);
++	if (err) {
++		dev_err(&pdev->dev, "unable to register net device\n");
++		goto err_debugfs_exit;
++	}
++
++	pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d, mode:%s\n",
++		dev->name, dev->base_addr, dev->irq,
++		ag71xx_get_phy_if_mode_name(pdata->phy_if_mode));
++
++	return 0;
++
++err_debugfs_exit:
++	ag71xx_debugfs_exit(ag);
++err_phy_disconnect:
++	ag71xx_phy_disconnect(ag);
++err_free_desc:
++	dma_free_coherent(NULL, sizeof(struct ag71xx_desc), ag->stop_desc,
++			  ag->stop_desc_dma);
++err_free_irq:
++	free_irq(dev->irq, dev);
++err_unmap_base:
++	iounmap(ag->mac_base);
++err_free_dev:
++	kfree(dev);
++err_out:
++	platform_set_drvdata(pdev, NULL);
++	return err;
++}
++
++static int ag71xx_remove(struct platform_device *pdev)
++{
++	struct net_device *dev = platform_get_drvdata(pdev);
++
++	if (dev) {
++		struct ag71xx *ag = netdev_priv(dev);
++
++		ag71xx_debugfs_exit(ag);
++		ag71xx_phy_disconnect(ag);
++		unregister_netdev(dev);
++		free_irq(dev->irq, dev);
++		iounmap(ag->mac_base);
++		kfree(dev);
++		platform_set_drvdata(pdev, NULL);
++	}
++
++	return 0;
++}
++
++static struct platform_driver ag71xx_driver = {
++	.probe		= ag71xx_probe,
++	.remove		= ag71xx_remove,
++	.driver = {
++		.name	= AG71XX_DRV_NAME,
++	}
++};
++
++static int __init ag71xx_module_init(void)
++{
++	int ret;
++
++	ret = ag71xx_debugfs_root_init();
++	if (ret)
++		goto err_out;
++
++	ret = ag71xx_mdio_driver_init();
++	if (ret)
++		goto err_debugfs_exit;
++
++	ret = platform_driver_register(&ag71xx_driver);
++	if (ret)
++		goto err_mdio_exit;
++
++	return 0;
++
++err_mdio_exit:
++	ag71xx_mdio_driver_exit();
++err_debugfs_exit:
++	ag71xx_debugfs_root_exit();
++err_out:
++	return ret;
++}
++
++static void __exit ag71xx_module_exit(void)
++{
++	platform_driver_unregister(&ag71xx_driver);
++	ag71xx_mdio_driver_exit();
++	ag71xx_debugfs_root_exit();
++}
++
++module_init(ag71xx_module_init);
++module_exit(ag71xx_module_exit);
++
++MODULE_VERSION(AG71XX_DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" AG71XX_DRV_NAME);
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,318 @@
++/*
++ *  Atheros AR71xx built-in ethernet mac driver
++ *
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Based on Atheros' AG7100 driver
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++#define AG71XX_MDIO_RETRY	1000
++#define AG71XX_MDIO_DELAY	5
++
++static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg,
++				  u32 value)
++{
++	void __iomem *r;
++
++	r = am->mdio_base + reg;
++	__raw_writel(value, r);
++
++	/* flush write */
++	(void) __raw_readl(r);
++}
++
++static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg)
++{
++	return __raw_readl(am->mdio_base + reg);
++}
++
++static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am)
++{
++	DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n",
++		am->mii_bus->name,
++		ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG),
++		ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD),
++		ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR));
++	DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n",
++		am->mii_bus->name,
++		ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL),
++		ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS),
++		ag71xx_mdio_rr(am, AG71XX_REG_MII_IND));
++}
++
++static int ag71xx_mdio_wait_busy(struct ag71xx_mdio *am)
++{
++	int i;
++
++	for (i = 0; i < AG71XX_MDIO_RETRY; i++) {
++		u32 busy;
++
++		udelay(AG71XX_MDIO_DELAY);
++
++		busy = ag71xx_mdio_rr(am, AG71XX_REG_MII_IND);
++		if (!busy)
++			return 0;
++
++		udelay(AG71XX_MDIO_DELAY);
++	}
++
++	pr_err("%s: MDIO operation timed out\n", am->mii_bus->name);
++
++	return -ETIMEDOUT;
++}
++
++int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg)
++{
++	int err;
++	int ret;
++
++	err = ag71xx_mdio_wait_busy(am);
++	if (err)
++		return 0xffff;
++
++	ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
++	ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
++			((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
++	ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ);
++
++	err = ag71xx_mdio_wait_busy(am);
++	if (err)
++		return 0xffff;
++
++	ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff;
++	ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
++
++	DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret);
++
++	return ret;
++}
++
++void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val)
++{
++	DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
++
++	ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
++			((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
++	ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val);
++
++	ag71xx_mdio_wait_busy(am);
++}
++
++static const u32 ar71xx_mdio_div_table[] = {
++	4, 4, 6, 8, 10, 14, 20, 28,
++};
++
++static const u32 ar7240_mdio_div_table[] = {
++	2, 2, 4, 6, 8, 12, 18, 26, 32, 40, 48, 56, 62, 70, 78, 96,
++};
++
++static const u32 ar933x_mdio_div_table[] = {
++	4, 4, 6, 8, 10, 14, 20, 28, 34, 42, 50, 58, 66, 74, 82, 98,
++};
++
++static int ag71xx_mdio_get_divider(struct ag71xx_mdio *am, u32 *div)
++{
++	unsigned long ref_clock, mdio_clock;
++	const u32 *table;
++	int ndivs;
++	int i;
++
++	ref_clock = am->pdata->ref_clock;
++	mdio_clock = am->pdata->mdio_clock;
++
++	if (!ref_clock || !mdio_clock)
++		return -EINVAL;
++
++	if (am->pdata->is_ar9330 || am->pdata->is_ar934x) {
++		table = ar933x_mdio_div_table;
++		ndivs = ARRAY_SIZE(ar933x_mdio_div_table);
++	} else if (am->pdata->is_ar7240) {
++		table = ar7240_mdio_div_table;
++		ndivs = ARRAY_SIZE(ar7240_mdio_div_table);
++	} else {
++		table = ar71xx_mdio_div_table;
++		ndivs = ARRAY_SIZE(ar71xx_mdio_div_table);
++	}
++
++	for (i = 0; i < ndivs; i++) {
++		unsigned long t;
++
++		t = ref_clock / table[i];
++		if (t <= mdio_clock) {
++			*div = i;
++			return 0;
++		}
++	}
++
++	dev_err(&am->mii_bus->dev, "no divider found for %lu/%lu\n",
++		ref_clock, mdio_clock);
++	return -ENOENT;
++}
++
++static int ag71xx_mdio_reset(struct mii_bus *bus)
++{
++	struct ag71xx_mdio *am = bus->priv;
++	u32 t;
++	int err;
++
++	err = ag71xx_mdio_get_divider(am, &t);
++	if (err) {
++		/* fallback */
++		if (am->pdata->is_ar7240)
++			t = MII_CFG_CLK_DIV_6;
++		else if (am->pdata->builtin_switch && !am->pdata->is_ar934x)
++			t = MII_CFG_CLK_DIV_10;
++		else if (!am->pdata->builtin_switch && am->pdata->is_ar934x)
++			t = MII_CFG_CLK_DIV_58;
++		else
++			t = MII_CFG_CLK_DIV_28;
++	}
++
++	ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET);
++	udelay(100);
++
++	ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t);
++	udelay(100);
++
++	if (am->pdata->reset)
++		am->pdata->reset(bus);
++
++	return 0;
++}
++
++static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg)
++{
++	struct ag71xx_mdio *am = bus->priv;
++
++	if (am->pdata->builtin_switch)
++		return ar7240sw_phy_read(bus, addr, reg);
++	else
++		return ag71xx_mdio_mii_read(am, addr, reg);
++}
++
++static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val)
++{
++	struct ag71xx_mdio *am = bus->priv;
++
++	if (am->pdata->builtin_switch)
++		ar7240sw_phy_write(bus, addr, reg, val);
++	else
++		ag71xx_mdio_mii_write(am, addr, reg, val);
++	return 0;
++}
++
++static int ag71xx_mdio_probe(struct platform_device *pdev)
++{
++	struct ag71xx_mdio_platform_data *pdata;
++	struct ag71xx_mdio *am;
++	struct resource *res;
++	int i;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata) {
++		dev_err(&pdev->dev, "no platform data specified\n");
++		return -EINVAL;
++	}
++
++	am = kzalloc(sizeof(*am), GFP_KERNEL);
++	if (!am) {
++		err = -ENOMEM;
++		goto err_out;
++	}
++
++	am->pdata = pdata;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(&pdev->dev, "no iomem resource found\n");
++		err = -ENXIO;
++		goto err_out;
++	}
++
++	am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1);
++	if (!am->mdio_base) {
++		dev_err(&pdev->dev, "unable to ioremap registers\n");
++		err = -ENOMEM;
++		goto err_free_mdio;
++	}
++
++	am->mii_bus = mdiobus_alloc();
++	if (am->mii_bus == NULL) {
++		err = -ENOMEM;
++		goto err_iounmap;
++	}
++
++	am->mii_bus->name = "ag71xx_mdio";
++	am->mii_bus->read = ag71xx_mdio_read;
++	am->mii_bus->write = ag71xx_mdio_write;
++	am->mii_bus->reset = ag71xx_mdio_reset;
++	am->mii_bus->irq = am->mii_irq;
++	am->mii_bus->priv = am;
++	am->mii_bus->parent = &pdev->dev;
++	snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
++	am->mii_bus->phy_mask = pdata->phy_mask;
++
++	for (i = 0; i < PHY_MAX_ADDR; i++)
++		am->mii_irq[i] = PHY_POLL;
++
++	ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0);
++
++	err = mdiobus_register(am->mii_bus);
++	if (err)
++		goto err_free_bus;
++
++	ag71xx_mdio_dump_regs(am);
++
++	platform_set_drvdata(pdev, am);
++	return 0;
++
++err_free_bus:
++	mdiobus_free(am->mii_bus);
++err_iounmap:
++	iounmap(am->mdio_base);
++err_free_mdio:
++	kfree(am);
++err_out:
++	return err;
++}
++
++static int ag71xx_mdio_remove(struct platform_device *pdev)
++{
++	struct ag71xx_mdio *am = platform_get_drvdata(pdev);
++
++	if (am) {
++		mdiobus_unregister(am->mii_bus);
++		mdiobus_free(am->mii_bus);
++		iounmap(am->mdio_base);
++		kfree(am);
++		platform_set_drvdata(pdev, NULL);
++	}
++
++	return 0;
++}
++
++static struct platform_driver ag71xx_mdio_driver = {
++	.probe		= ag71xx_mdio_probe,
++	.remove		= ag71xx_mdio_remove,
++	.driver = {
++		.name	= "ag71xx-mdio",
++	}
++};
++
++int __init ag71xx_mdio_driver_init(void)
++{
++	return platform_driver_register(&ag71xx_mdio_driver);
++}
++
++void ag71xx_mdio_driver_exit(void)
++{
++	platform_driver_unregister(&ag71xx_mdio_driver);
++}
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,235 @@
++/*
++ *  Atheros AR71xx built-in ethernet mac driver
++ *
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Based on Atheros' AG7100 driver
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++static void ag71xx_phy_link_adjust(struct net_device *dev)
++{
++	struct ag71xx *ag = netdev_priv(dev);
++	struct phy_device *phydev = ag->phy_dev;
++	unsigned long flags;
++	int status_change = 0;
++
++	spin_lock_irqsave(&ag->lock, flags);
++
++	if (phydev->link) {
++		if (ag->duplex != phydev->duplex
++		    || ag->speed != phydev->speed) {
++			status_change = 1;
++		}
++	}
++
++	if (phydev->link != ag->link)
++		status_change = 1;
++
++	ag->link = phydev->link;
++	ag->duplex = phydev->duplex;
++	ag->speed = phydev->speed;
++
++	if (status_change)
++		ag71xx_link_adjust(ag);
++
++	spin_unlock_irqrestore(&ag->lock, flags);
++}
++
++void ag71xx_phy_start(struct ag71xx *ag)
++{
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++	if (ag->phy_dev) {
++		phy_start(ag->phy_dev);
++	} else if (pdata->mii_bus_dev && pdata->switch_data) {
++		ag71xx_ar7240_start(ag);
++	} else {
++		ag->link = 1;
++		ag71xx_link_adjust(ag);
++	}
++}
++
++void ag71xx_phy_stop(struct ag71xx *ag)
++{
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++	unsigned long flags;
++
++	if (ag->phy_dev)
++		phy_stop(ag->phy_dev);
++	else if (pdata->mii_bus_dev && pdata->switch_data)
++		ag71xx_ar7240_stop(ag);
++
++	spin_lock_irqsave(&ag->lock, flags);
++	if (ag->link) {
++		ag->link = 0;
++		ag71xx_link_adjust(ag);
++	}
++	spin_unlock_irqrestore(&ag->lock, flags);
++}
++
++static int ag71xx_phy_connect_fixed(struct ag71xx *ag)
++{
++	struct device *dev = &ag->pdev->dev;
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++	int ret = 0;
++
++	/* use fixed settings */
++	switch (pdata->speed) {
++	case SPEED_10:
++	case SPEED_100:
++	case SPEED_1000:
++		break;
++	default:
++		dev_err(dev, "invalid speed specified\n");
++		ret = -EINVAL;
++		break;
++	}
++
++	dev_dbg(dev, "using fixed link parameters\n");
++
++	ag->duplex = pdata->duplex;
++	ag->speed = pdata->speed;
++
++	return ret;
++}
++
++static int ag71xx_phy_connect_multi(struct ag71xx *ag)
++{
++	struct device *dev = &ag->pdev->dev;
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++	struct phy_device *phydev = NULL;
++	int phy_addr;
++	int ret = 0;
++
++	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++		if (!(pdata->phy_mask & (1 << phy_addr)))
++			continue;
++
++		if (ag->mii_bus->phy_map[phy_addr] == NULL)
++			continue;
++
++		DBG("%s: PHY found at %s, uid=%08x\n",
++			dev_name(dev),
++			dev_name(&ag->mii_bus->phy_map[phy_addr]->dev),
++			ag->mii_bus->phy_map[phy_addr]->phy_id);
++
++		if (phydev == NULL)
++			phydev = ag->mii_bus->phy_map[phy_addr];
++	}
++
++	if (!phydev) {
++		dev_err(dev, "no PHY found with phy_mask=%08x\n",
++			   pdata->phy_mask);
++		return -ENODEV;
++	}
++
++	ag->phy_dev = phy_connect(ag->dev, dev_name(&phydev->dev),
++				  &ag71xx_phy_link_adjust,
++				  pdata->phy_if_mode);
++
++	if (IS_ERR(ag->phy_dev)) {
++		dev_err(dev, "could not connect to PHY at %s\n",
++			   dev_name(&phydev->dev));
++		return PTR_ERR(ag->phy_dev);
++	}
++
++	/* mask with MAC supported features */
++	if (pdata->has_gbit)
++		phydev->supported &= PHY_GBIT_FEATURES;
++	else
++		phydev->supported &= PHY_BASIC_FEATURES;
++
++	phydev->advertising = phydev->supported;
++
++	dev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n",
++		    dev_name(&phydev->dev), phydev->phy_id, phydev->drv->name);
++
++	ag->link = 0;
++	ag->speed = 0;
++	ag->duplex = -1;
++
++	return ret;
++}
++
++static int dev_is_class(struct device *dev, void *class)
++{
++	if (dev->class != NULL && !strcmp(dev->class->name, class))
++		return 1;
++
++	return 0;
++}
++
++static struct device *dev_find_class(struct device *parent, char *class)
++{
++	if (dev_is_class(parent, class)) {
++		get_device(parent);
++		return parent;
++	}
++
++	return device_find_child(parent, class, dev_is_class);
++}
++
++static struct mii_bus *dev_to_mii_bus(struct device *dev)
++{
++	struct device *d;
++
++	d = dev_find_class(dev, "mdio_bus");
++	if (d != NULL) {
++		struct mii_bus *bus;
++
++		bus = to_mii_bus(d);
++		put_device(d);
++
++		return bus;
++	}
++
++	return NULL;
++}
++
++int ag71xx_phy_connect(struct ag71xx *ag)
++{
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++	if (pdata->mii_bus_dev == NULL ||
++	    pdata->mii_bus_dev->bus == NULL )
++		return ag71xx_phy_connect_fixed(ag);
++
++	ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev);
++	if (ag->mii_bus == NULL) {
++		dev_err(&ag->pdev->dev, "unable to find MII bus on device '%s'\n",
++			   dev_name(pdata->mii_bus_dev));
++		return -ENODEV;
++	}
++
++	/* Reset the mdio bus explicitly */
++	if (ag->mii_bus->reset) {
++		mutex_lock(&ag->mii_bus->mdio_lock);
++		ag->mii_bus->reset(ag->mii_bus);
++		mutex_unlock(&ag->mii_bus->mdio_lock);
++	}
++
++	if (pdata->switch_data)
++		return ag71xx_ar7240_init(ag);
++
++	if (pdata->phy_mask)
++		return ag71xx_phy_connect_multi(ag);
++
++	return ag71xx_phy_connect_fixed(ag);
++}
++
++void ag71xx_phy_disconnect(struct ag71xx *ag)
++{
++	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++	if (pdata->switch_data)
++		ag71xx_ar7240_cleanup(ag);
++	else if (ag->phy_dev)
++		phy_disconnect(ag->phy_dev);
++}
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/Kconfig linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/Kconfig
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/Kconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/Kconfig	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,33 @@
++config AG71XX
++	tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
++	depends on ATH79
++	select PHYLIB
++	help
++	  If you wish to compile a kernel for AR7XXX/91XXX and enable
++	  ethernet support, then you should always answer Y to this.
++
++if AG71XX
++
++config AG71XX_DEBUG
++	bool "Atheros AR71xx built-in ethernet driver debugging"
++	default n
++	help
++	  Atheros AR71xx built-in ethernet driver debugging messages.
++
++config AG71XX_DEBUG_FS
++	bool "Atheros AR71xx built-in ethernet driver debugfs support"
++	depends on DEBUG_FS
++	default n
++	help
++	  Say Y, if you need access to various statistics provided by
++	  the ag71xx driver.
++
++config AG71XX_AR8216_SUPPORT
++	bool "special support for the Atheros AR8216 switch"
++	default n
++	default y if ATH79_MACH_WNR2000 || ATH79_MACH_MZK_W04NU
++	help
++	  Say 'y' here if you want to enable special support for the
++	  Atheros AR8216 switch found on some boards.
++
++endif
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/Makefile linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/Makefile
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/ag71xx/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/ag71xx/Makefile	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,15 @@
++#
++# Makefile for the Atheros AR71xx built-in ethernet macs
++#
++
++ag71xx-y	+= ag71xx_main.o
++ag71xx-y	+= ag71xx_ethtool.o
++ag71xx-y	+= ag71xx_phy.o
++ag71xx-y	+= ag71xx_mdio.o
++ag71xx-y	+= ag71xx_ar7240.o
++
++ag71xx-$(CONFIG_AG71XX_DEBUG_FS)	+= ag71xx_debugfs.o
++ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT)	+= ag71xx_ar8216.o
++
++obj-$(CONFIG_AG71XX)	+= ag71xx.o
++
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/Kconfig linux-4.1.13/drivers/net/ethernet/atheros/Kconfig
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/Kconfig	2015-12-04 19:57:03.882110905 +0100
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+ 	bool "Atheros devices"
+ 	default y
+-	depends on PCI
++	depends on (PCI || ATH79)
+ 	---help---
+ 	  If you have a network (Ethernet) card belonging to this class, say Y
+ 	  and read the Ethernet-HOWTO, available from
+@@ -80,4 +80,6 @@
+ 	  To compile this driver as a module, choose M here.  The module
+ 	  will be called alx.
+ 
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+diff -Nur linux-4.1.13.orig/drivers/net/ethernet/atheros/Makefile linux-4.1.13/drivers/net/ethernet/atheros/Makefile
+--- linux-4.1.13.orig/drivers/net/ethernet/atheros/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/net/ethernet/atheros/Makefile	2015-12-04 19:57:03.882110905 +0100
+@@ -2,6 +2,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
+ 
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
+diff -Nur linux-4.1.13.orig/drivers/net/phy/at803x.c linux-4.1.13/drivers/net/phy/at803x.c
+--- linux-4.1.13.orig/drivers/net/phy/at803x.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/net/phy/at803x.c	2015-12-04 19:57:03.890110382 +0100
+@@ -12,12 +12,14 @@
+  */
+ 
+ #include <linux/phy.h>
++#include <linux/mdio.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+ #include <linux/of_gpio.h>
+ #include <linux/gpio/consumer.h>
++#include <linux/platform_data/phy-at803x.h>
+ 
+ #define AT803X_INTR_ENABLE			0x12
+ #define AT803X_INTR_STATUS			0x13
+@@ -34,8 +36,16 @@
+ #define AT803X_INER				0x0012
+ #define AT803X_INER_INIT			0xec00
+ #define AT803X_INSR				0x0013
++
++#define AT803X_PCS_SMART_EEE_CTRL3			0x805D
++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
++#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT	12
++#define AT803X_SMART_EEE_CTRL3_LPI_EN			BIT(8)
++
+ #define AT803X_DEBUG_ADDR			0x1D
+ #define AT803X_DEBUG_DATA			0x1E
++#define AT803X_DBG0_REG				0x00
++#define AT803X_DEBUG_RGMII_RX_CLK_DLY		BIT(8)
+ #define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
+ #define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
+ 
+@@ -50,6 +60,7 @@
+ struct at803x_priv {
+ 	bool phy_reset:1;
+ 	struct gpio_desc *gpiod_reset;
++	int prev_speed;
+ };
+ 
+ struct at803x_context {
+@@ -61,6 +72,43 @@
+ 	u16 led_control;
+ };
+ 
++static u16
++at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set)
++{
++	struct mii_bus *bus = phydev->bus;
++	int val;
++
++	mutex_lock(&bus->mdio_lock);
++
++	bus->write(bus, phydev->addr, AT803X_DEBUG_ADDR, reg);
++	val = bus->read(bus, phydev->addr, AT803X_DEBUG_DATA);
++	if (val < 0) {
++		val = 0xffff;
++		goto out;
++	}
++
++	val &= ~clear;
++	val |= set;
++	bus->write(bus, phydev->addr, AT803X_DEBUG_DATA, val);
++
++out:
++	mutex_unlock(&bus->mdio_lock);
++	return val;
++}
++
++static inline void
++at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set)
++{
++	at803x_dbg_reg_rmw(phydev, reg, 0, set);
++}
++
++static inline void
++at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear)
++{
++	at803x_dbg_reg_rmw(phydev, reg, clear, 0);
++}
++
++
+ /* save relevant PHY registers to private copy */
+ static void at803x_context_save(struct phy_device *phydev,
+ 				struct at803x_context *context)
+@@ -209,8 +257,16 @@
+ 	return 0;
+ }
+ 
++static void at803x_disable_smarteee(struct phy_device *phydev)
++{
++	phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
++		1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
++	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
++}
++
+ static int at803x_config_init(struct phy_device *phydev)
+ {
++	struct at803x_platform_data *pdata;
+ 	int ret;
+ 
+ 	ret = genphy_config_init(phydev);
+@@ -228,6 +284,26 @@
+ 			return ret;
+ 	}
+ 
++	pdata = dev_get_platdata(&phydev->dev);
++	if (pdata) {
++		if (pdata->disable_smarteee)
++			at803x_disable_smarteee(phydev);
++
++		if (pdata->enable_rgmii_rx_delay)
++			at803x_dbg_reg_set(phydev, AT803X_DBG0_REG,
++				AT803X_DEBUG_RGMII_RX_CLK_DLY);
++		else
++			at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG,
++				AT803X_DEBUG_RGMII_RX_CLK_DLY);
++
++		if (pdata->enable_rgmii_tx_delay)
++			at803x_dbg_reg_set(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
++				AT803X_DEBUG_RGMII_TX_CLK_DLY);
++		else
++			at803x_dbg_reg_clr(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
++				AT803X_DEBUG_RGMII_TX_CLK_DLY);
++	}
++
+ 	return 0;
+ }
+ 
+@@ -259,6 +335,8 @@
+ static void at803x_link_change_notify(struct phy_device *phydev)
+ {
+ 	struct at803x_priv *priv = phydev->priv;
++	struct at803x_platform_data *pdata;
++	pdata = dev_get_platdata(&phydev->dev);
+ 
+ 	/*
+ 	 * Conduct a hardware reset for AT8030 every time a link loss is
+@@ -289,6 +367,26 @@
+ 			priv->phy_reset = false;
+ 		}
+ 	}
++	if (pdata && pdata->fixup_rgmii_tx_delay &&
++	    phydev->speed != priv->prev_speed) {
++		switch (phydev->speed) {
++		case SPEED_10:
++		case SPEED_100:
++			at803x_dbg_reg_set(phydev,
++				AT803X_DEBUG_SYSTEM_MODE_CTRL,
++				AT803X_DEBUG_RGMII_TX_CLK_DLY);
++			break;
++		case SPEED_1000:
++			at803x_dbg_reg_clr(phydev,
++				AT803X_DEBUG_SYSTEM_MODE_CTRL,
++				AT803X_DEBUG_RGMII_TX_CLK_DLY);
++			break;
++		default:
++			break;
++		}
++
++		priv->prev_speed = phydev->speed;
++	}
+ }
+ 
+ static struct phy_driver at803x_driver[] = {
+diff -Nur linux-4.1.13.orig/drivers/net/phy/Kconfig linux-4.1.13/drivers/net/phy/Kconfig
+--- linux-4.1.13.orig/drivers/net/phy/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/net/phy/Kconfig	2015-12-04 21:33:39.755626859 +0100
+@@ -12,6 +12,16 @@
+ 
+ if PHYLIB
+ 
++config SWCONFIG
++	tristate "Switch configuration API"
++	---help---
++	  Switch configuration API using netlink. This allows
++	  you to configure the VLAN features of certain switches.
++
++config SWCONFIG_LEDS
++	bool "Switch LED trigger support"
++	depends on (SWCONFIG && LEDS_TRIGGERS)
++
+ comment "MII PHY device drivers"
+ 
+ config AT803X_PHY
+diff -Nur linux-4.1.13.orig/drivers/net/phy/Makefile linux-4.1.13/drivers/net/phy/Makefile
+--- linux-4.1.13.orig/drivers/net/phy/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/net/phy/Makefile	2015-12-04 21:33:39.775625531 +0100
+@@ -3,6 +3,7 @@
+ libphy-objs			:= phy.o phy_device.o mdio_bus.o
+ 
+ obj-$(CONFIG_PHYLIB)		+= libphy.o
++obj-$(CONFIG_SWCONFIG)		+= swconfig.o
+ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+ obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+ obj-$(CONFIG_CICADA_PHY)	+= cicada.o
+diff -Nur linux-4.1.13.orig/drivers/net/phy/mdio-bitbang.c linux-4.1.13/drivers/net/phy/mdio-bitbang.c
+--- linux-4.1.13.orig/drivers/net/phy/mdio-bitbang.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/net/phy/mdio-bitbang.c	2015-12-04 19:57:05.909978229 +0100
+@@ -17,6 +17,7 @@
+  * kind, whether express or implied.
+  */
+ 
++#include <linux/irqflags.h>
+ #include <linux/module.h>
+ #include <linux/mdio-bitbang.h>
+ #include <linux/types.h>
+@@ -156,7 +157,9 @@
+ {
+ 	struct mdiobb_ctrl *ctrl = bus->priv;
+ 	int ret, i;
++	long flags;
+ 
++	local_irq_save(flags);
+ 	if (reg & MII_ADDR_C45) {
+ 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ 		mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
+@@ -165,26 +168,21 @@
+ 
+ 	ctrl->ops->set_mdio_dir(ctrl, 0);
+ 
+-	/* check the turnaround bit: the PHY should be driving it to zero */
+-	if (mdiobb_get_bit(ctrl) != 0) {
+-		/* PHY didn't drive TA low -- flush any bits it
+-		 * may be trying to send.
+-		 */
+-		for (i = 0; i < 32; i++)
+-			mdiobb_get_bit(ctrl);
+-
+-		return 0xffff;
+-	}
++	mdiobb_get_bit(ctrl);
+ 
+ 	ret = mdiobb_get_num(ctrl, 16);
+ 	mdiobb_get_bit(ctrl);
++	local_irq_restore(flags);
++
+ 	return ret;
+ }
+ 
+ static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
+ {
+ 	struct mdiobb_ctrl *ctrl = bus->priv;
++	long flags;
+ 
++	local_irq_save(flags);
+ 	if (reg & MII_ADDR_C45) {
+ 		reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ 		mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
+@@ -199,6 +197,8 @@
+ 
+ 	ctrl->ops->set_mdio_dir(ctrl, 0);
+ 	mdiobb_get_bit(ctrl);
++	local_irq_restore(flags);
++
+ 	return 0;
+ }
+ 
+diff -Nur linux-4.1.13.orig/drivers/net/phy/phy.c linux-4.1.13/drivers/net/phy/phy.c
+--- linux-4.1.13.orig/drivers/net/phy/phy.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/net/phy/phy.c	2015-12-04 20:31:10.856994541 +0100
+@@ -357,6 +357,50 @@
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+ 
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+diff -Nur linux-4.1.13.orig/drivers/net/phy/swconfig.c linux-4.1.13/drivers/net/phy/swconfig.c
+--- linux-4.1.13.orig/drivers/net/phy/swconfig.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/phy/swconfig.c	2015-12-04 21:18:34.855186030 +0100
+@@ -0,0 +1,1153 @@
++/*
++ * swconfig.c: Switch configuration API
++ *
++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/if.h>
++#include <linux/if_ether.h>
++#include <linux/capability.h>
++#include <linux/skbuff.h>
++#include <linux/switch.h>
++#include <linux/of.h>
++#include <linux/version.h>
++
++#define SWCONFIG_DEVNAME	"switch%d"
++
++#include "swconfig_leds.c"
++
++MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
++MODULE_LICENSE("GPL");
++
++static int swdev_id;
++static struct list_head swdevs;
++static DEFINE_SPINLOCK(swdevs_lock);
++struct swconfig_callback;
++
++struct swconfig_callback {
++	struct sk_buff *msg;
++	struct genlmsghdr *hdr;
++	struct genl_info *info;
++	int cmd;
++
++	/* callback for filling in the message data */
++	int (*fill)(struct swconfig_callback *cb, void *arg);
++
++	/* callback for closing the message before sending it */
++	int (*close)(struct swconfig_callback *cb, void *arg);
++
++	struct nlattr *nest[4];
++	int args[4];
++};
++
++/* defaults */
++
++static int
++swconfig_get_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	int ret;
++	if (val->port_vlan >= dev->vlans)
++		return -EINVAL;
++
++	if (!dev->ops->get_vlan_ports)
++		return -EOPNOTSUPP;
++
++	ret = dev->ops->get_vlan_ports(dev, val);
++	return ret;
++}
++
++static int
++swconfig_set_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct switch_port *ports = val->value.ports;
++	const struct switch_dev_ops *ops = dev->ops;
++	int i;
++
++	if (val->port_vlan >= dev->vlans)
++		return -EINVAL;
++
++	/* validate ports */
++	if (val->len > dev->ports)
++		return -EINVAL;
++
++	if (!ops->set_vlan_ports)
++		return -EOPNOTSUPP;
++
++	for (i = 0; i < val->len; i++) {
++		if (ports[i].id >= dev->ports)
++			return -EINVAL;
++
++		if (ops->set_port_pvid &&
++		    !(ports[i].flags & (1 << SWITCH_PORT_FLAG_TAGGED)))
++			ops->set_port_pvid(dev, ports[i].id, val->port_vlan);
++	}
++
++	return ops->set_vlan_ports(dev, val);
++}
++
++static int
++swconfig_set_pvid(struct switch_dev *dev, const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	if (val->port_vlan >= dev->ports)
++		return -EINVAL;
++
++	if (!dev->ops->set_port_pvid)
++		return -EOPNOTSUPP;
++
++	return dev->ops->set_port_pvid(dev, val->port_vlan, val->value.i);
++}
++
++static int
++swconfig_get_pvid(struct switch_dev *dev, const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	if (val->port_vlan >= dev->ports)
++		return -EINVAL;
++
++	if (!dev->ops->get_port_pvid)
++		return -EOPNOTSUPP;
++
++	return dev->ops->get_port_pvid(dev, val->port_vlan, &val->value.i);
++}
++
++static const char *
++swconfig_speed_str(enum switch_port_speed speed)
++{
++	switch (speed) {
++	case SWITCH_PORT_SPEED_10:
++		return "10baseT";
++	case SWITCH_PORT_SPEED_100:
++		return "100baseT";
++	case SWITCH_PORT_SPEED_1000:
++		return "1000baseT";
++	default:
++		break;
++	}
++
++	return "unknown";
++}
++
++static int
++swconfig_get_link(struct switch_dev *dev, const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	struct switch_port_link link;
++	int len;
++	int ret;
++
++	if (val->port_vlan >= dev->ports)
++		return -EINVAL;
++
++	if (!dev->ops->get_port_link)
++		return -EOPNOTSUPP;
++
++	memset(&link, 0, sizeof(link));
++	ret = dev->ops->get_port_link(dev, val->port_vlan, &link);
++	if (ret)
++		return ret;
++
++	memset(dev->buf, 0, sizeof(dev->buf));
++
++	if (link.link)
++		len = snprintf(dev->buf, sizeof(dev->buf),
++			       "port:%d link:up speed:%s %s-duplex %s%s%s%s%s",
++			       val->port_vlan,
++			       swconfig_speed_str(link.speed),
++			       link.duplex ? "full" : "half",
++			       link.tx_flow ? "txflow " : "",
++			       link.rx_flow ?	"rxflow " : "",
++			       link.eee & ADVERTISED_100baseT_Full ? "eee100 " : "",
++			       link.eee & ADVERTISED_1000baseT_Full ? "eee1000 " : "",
++			       link.aneg ? "auto" : "");
++	else
++		len = snprintf(dev->buf, sizeof(dev->buf), "port:%d link:down",
++			       val->port_vlan);
++
++	val->value.s = dev->buf;
++	val->len = len;
++
++	return 0;
++}
++
++static int
++swconfig_apply_config(struct switch_dev *dev, const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	/* don't complain if not supported by the switch driver */
++	if (!dev->ops->apply_config)
++		return 0;
++
++	return dev->ops->apply_config(dev);
++}
++
++static int
++swconfig_reset_switch(struct switch_dev *dev, const struct switch_attr *attr,
++			struct switch_val *val)
++{
++	/* don't complain if not supported by the switch driver */
++	if (!dev->ops->reset_switch)
++		return 0;
++
++	return dev->ops->reset_switch(dev);
++}
++
++enum global_defaults {
++	GLOBAL_APPLY,
++	GLOBAL_RESET,
++};
++
++enum vlan_defaults {
++	VLAN_PORTS,
++};
++
++enum port_defaults {
++	PORT_PVID,
++	PORT_LINK,
++};
++
++static struct switch_attr default_global[] = {
++	[GLOBAL_APPLY] = {
++		.type = SWITCH_TYPE_NOVAL,
++		.name = "apply",
++		.description = "Activate changes in the hardware",
++		.set = swconfig_apply_config,
++	},
++	[GLOBAL_RESET] = {
++		.type = SWITCH_TYPE_NOVAL,
++		.name = "reset",
++		.description = "Reset the switch",
++		.set = swconfig_reset_switch,
++	}
++};
++
++static struct switch_attr default_port[] = {
++	[PORT_PVID] = {
++		.type = SWITCH_TYPE_INT,
++		.name = "pvid",
++		.description = "Primary VLAN ID",
++		.set = swconfig_set_pvid,
++		.get = swconfig_get_pvid,
++	},
++	[PORT_LINK] = {
++		.type = SWITCH_TYPE_STRING,
++		.name = "link",
++		.description = "Get port link information",
++		.set = NULL,
++		.get = swconfig_get_link,
++	}
++};
++
++static struct switch_attr default_vlan[] = {
++	[VLAN_PORTS] = {
++		.type = SWITCH_TYPE_PORTS,
++		.name = "ports",
++		.description = "VLAN port mapping",
++		.set = swconfig_set_vlan_ports,
++		.get = swconfig_get_vlan_ports,
++	},
++};
++
++static const struct switch_attr *
++swconfig_find_attr_by_name(const struct switch_attrlist *alist,
++				const char *name)
++{
++	int i;
++
++	for (i = 0; i < alist->n_attr; i++)
++		if (strcmp(name, alist->attr[i].name) == 0)
++			return &alist->attr[i];
++
++	return NULL;
++}
++
++static void swconfig_defaults_init(struct switch_dev *dev)
++{
++	const struct switch_dev_ops *ops = dev->ops;
++
++	dev->def_global = 0;
++	dev->def_vlan = 0;
++	dev->def_port = 0;
++
++	if (ops->get_vlan_ports || ops->set_vlan_ports)
++		set_bit(VLAN_PORTS, &dev->def_vlan);
++
++	if (ops->get_port_pvid || ops->set_port_pvid)
++		set_bit(PORT_PVID, &dev->def_port);
++
++	if (ops->get_port_link &&
++	    !swconfig_find_attr_by_name(&ops->attr_port, "link"))
++		set_bit(PORT_LINK, &dev->def_port);
++
++	/* always present, can be no-op */
++	set_bit(GLOBAL_APPLY, &dev->def_global);
++	set_bit(GLOBAL_RESET, &dev->def_global);
++}
++
++
++static struct genl_family switch_fam = {
++	.id = GENL_ID_GENERATE,
++	.name = "switch",
++	.hdrsize = 0,
++	.version = 1,
++	.maxattr = SWITCH_ATTR_MAX,
++};
++
++static const struct nla_policy switch_policy[SWITCH_ATTR_MAX+1] = {
++	[SWITCH_ATTR_ID] = { .type = NLA_U32 },
++	[SWITCH_ATTR_OP_ID] = { .type = NLA_U32 },
++	[SWITCH_ATTR_OP_PORT] = { .type = NLA_U32 },
++	[SWITCH_ATTR_OP_VLAN] = { .type = NLA_U32 },
++	[SWITCH_ATTR_OP_VALUE_INT] = { .type = NLA_U32 },
++	[SWITCH_ATTR_OP_VALUE_STR] = { .type = NLA_NUL_STRING },
++	[SWITCH_ATTR_OP_VALUE_PORTS] = { .type = NLA_NESTED },
++	[SWITCH_ATTR_TYPE] = { .type = NLA_U32 },
++};
++
++static const struct nla_policy port_policy[SWITCH_PORT_ATTR_MAX+1] = {
++	[SWITCH_PORT_ID] = { .type = NLA_U32 },
++	[SWITCH_PORT_FLAG_TAGGED] = { .type = NLA_FLAG },
++};
++
++static inline void
++swconfig_lock(void)
++{
++	spin_lock(&swdevs_lock);
++}
++
++static inline void
++swconfig_unlock(void)
++{
++	spin_unlock(&swdevs_lock);
++}
++
++static struct switch_dev *
++swconfig_get_dev(struct genl_info *info)
++{
++	struct switch_dev *dev = NULL;
++	struct switch_dev *p;
++	int id;
++
++	if (!info->attrs[SWITCH_ATTR_ID])
++		goto done;
++
++	id = nla_get_u32(info->attrs[SWITCH_ATTR_ID]);
++	swconfig_lock();
++	list_for_each_entry(p, &swdevs, dev_list) {
++		if (id != p->id)
++			continue;
++
++		dev = p;
++		break;
++	}
++	if (dev)
++		mutex_lock(&dev->sw_mutex);
++	else
++		pr_debug("device %d not found\n", id);
++	swconfig_unlock();
++done:
++	return dev;
++}
++
++static inline void
++swconfig_put_dev(struct switch_dev *dev)
++{
++	mutex_unlock(&dev->sw_mutex);
++}
++
++static int
++swconfig_dump_attr(struct swconfig_callback *cb, void *arg)
++{
++	struct switch_attr *op = arg;
++	struct genl_info *info = cb->info;
++	struct sk_buff *msg = cb->msg;
++	int id = cb->args[0];
++	void *hdr;
++
++	hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq, &switch_fam,
++			NLM_F_MULTI, SWITCH_CMD_NEW_ATTR);
++	if (IS_ERR(hdr))
++		return -1;
++
++	if (nla_put_u32(msg, SWITCH_ATTR_OP_ID, id))
++		goto nla_put_failure;
++	if (nla_put_u32(msg, SWITCH_ATTR_OP_TYPE, op->type))
++		goto nla_put_failure;
++	if (nla_put_string(msg, SWITCH_ATTR_OP_NAME, op->name))
++		goto nla_put_failure;
++	if (op->description)
++		if (nla_put_string(msg, SWITCH_ATTR_OP_DESCRIPTION,
++			op->description))
++			goto nla_put_failure;
++
++	genlmsg_end(msg, hdr);
++	return msg->len;
++nla_put_failure:
++	genlmsg_cancel(msg, hdr);
++	return -EMSGSIZE;
++}
++
++/* spread multipart messages across multiple message buffers */
++static int
++swconfig_send_multipart(struct swconfig_callback *cb, void *arg)
++{
++	struct genl_info *info = cb->info;
++	int restart = 0;
++	int err;
++
++	do {
++		if (!cb->msg) {
++			cb->msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
++			if (cb->msg == NULL)
++				goto error;
++		}
++
++		if (!(cb->fill(cb, arg) < 0))
++			break;
++
++		/* fill failed, check if this was already the second attempt */
++		if (restart)
++			goto error;
++
++		/* try again in a new message, send the current one */
++		restart = 1;
++		if (cb->close) {
++			if (cb->close(cb, arg) < 0)
++				goto error;
++		}
++		err = genlmsg_reply(cb->msg, info);
++		cb->msg = NULL;
++		if (err < 0)
++			goto error;
++
++	} while (restart);
++
++	return 0;
++
++error:
++	if (cb->msg)
++		nlmsg_free(cb->msg);
++	return -1;
++}
++
++static int
++swconfig_list_attrs(struct sk_buff *skb, struct genl_info *info)
++{
++	struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
++	const struct switch_attrlist *alist;
++	struct switch_dev *dev;
++	struct swconfig_callback cb;
++	int err = -EINVAL;
++	int i;
++
++	/* defaults */
++	struct switch_attr *def_list;
++	unsigned long *def_active;
++	int n_def;
++
++	dev = swconfig_get_dev(info);
++	if (!dev)
++		return -EINVAL;
++
++	switch (hdr->cmd) {
++	case SWITCH_CMD_LIST_GLOBAL:
++		alist = &dev->ops->attr_global;
++		def_list = default_global;
++		def_active = &dev->def_global;
++		n_def = ARRAY_SIZE(default_global);
++		break;
++	case SWITCH_CMD_LIST_VLAN:
++		alist = &dev->ops->attr_vlan;
++		def_list = default_vlan;
++		def_active = &dev->def_vlan;
++		n_def = ARRAY_SIZE(default_vlan);
++		break;
++	case SWITCH_CMD_LIST_PORT:
++		alist = &dev->ops->attr_port;
++		def_list = default_port;
++		def_active = &dev->def_port;
++		n_def = ARRAY_SIZE(default_port);
++		break;
++	default:
++		WARN_ON(1);
++		goto out;
++	}
++
++	memset(&cb, 0, sizeof(cb));
++	cb.info = info;
++	cb.fill = swconfig_dump_attr;
++	for (i = 0; i < alist->n_attr; i++) {
++		if (alist->attr[i].disabled)
++			continue;
++		cb.args[0] = i;
++		err = swconfig_send_multipart(&cb, (void *) &alist->attr[i]);
++		if (err < 0)
++			goto error;
++	}
++
++	/* defaults */
++	for (i = 0; i < n_def; i++) {
++		if (!test_bit(i, def_active))
++			continue;
++		cb.args[0] = SWITCH_ATTR_DEFAULTS_OFFSET + i;
++		err = swconfig_send_multipart(&cb, (void *) &def_list[i]);
++		if (err < 0)
++			goto error;
++	}
++	swconfig_put_dev(dev);
++
++	if (!cb.msg)
++		return 0;
++
++	return genlmsg_reply(cb.msg, info);
++
++error:
++	if (cb.msg)
++		nlmsg_free(cb.msg);
++out:
++	swconfig_put_dev(dev);
++	return err;
++}
++
++static const struct switch_attr *
++swconfig_lookup_attr(struct switch_dev *dev, struct genl_info *info,
++		struct switch_val *val)
++{
++	struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
++	const struct switch_attrlist *alist;
++	const struct switch_attr *attr = NULL;
++	int attr_id;
++
++	/* defaults */
++	struct switch_attr *def_list;
++	unsigned long *def_active;
++	int n_def;
++
++	if (!info->attrs[SWITCH_ATTR_OP_ID])
++		goto done;
++
++	switch (hdr->cmd) {
++	case SWITCH_CMD_SET_GLOBAL:
++	case SWITCH_CMD_GET_GLOBAL:
++		alist = &dev->ops->attr_global;
++		def_list = default_global;
++		def_active = &dev->def_global;
++		n_def = ARRAY_SIZE(default_global);
++		break;
++	case SWITCH_CMD_SET_VLAN:
++	case SWITCH_CMD_GET_VLAN:
++		alist = &dev->ops->attr_vlan;
++		def_list = default_vlan;
++		def_active = &dev->def_vlan;
++		n_def = ARRAY_SIZE(default_vlan);
++		if (!info->attrs[SWITCH_ATTR_OP_VLAN])
++			goto done;
++		val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_VLAN]);
++		if (val->port_vlan >= dev->vlans)
++			goto done;
++		break;
++	case SWITCH_CMD_SET_PORT:
++	case SWITCH_CMD_GET_PORT:
++		alist = &dev->ops->attr_port;
++		def_list = default_port;
++		def_active = &dev->def_port;
++		n_def = ARRAY_SIZE(default_port);
++		if (!info->attrs[SWITCH_ATTR_OP_PORT])
++			goto done;
++		val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_PORT]);
++		if (val->port_vlan >= dev->ports)
++			goto done;
++		break;
++	default:
++		WARN_ON(1);
++		goto done;
++	}
++
++	if (!alist)
++		goto done;
++
++	attr_id = nla_get_u32(info->attrs[SWITCH_ATTR_OP_ID]);
++	if (attr_id >= SWITCH_ATTR_DEFAULTS_OFFSET) {
++		attr_id -= SWITCH_ATTR_DEFAULTS_OFFSET;
++		if (attr_id >= n_def)
++			goto done;
++		if (!test_bit(attr_id, def_active))
++			goto done;
++		attr = &def_list[attr_id];
++	} else {
++		if (attr_id >= alist->n_attr)
++			goto done;
++		attr = &alist->attr[attr_id];
++	}
++
++	if (attr->disabled)
++		attr = NULL;
++
++done:
++	if (!attr)
++		pr_debug("attribute lookup failed\n");
++	val->attr = attr;
++	return attr;
++}
++
++static int
++swconfig_parse_ports(struct sk_buff *msg, struct nlattr *head,
++		struct switch_val *val, int max)
++{
++	struct nlattr *nla;
++	int rem;
++
++	val->len = 0;
++	nla_for_each_nested(nla, head, rem) {
++		struct nlattr *tb[SWITCH_PORT_ATTR_MAX+1];
++		struct switch_port *port = &val->value.ports[val->len];
++
++		if (val->len >= max)
++			return -EINVAL;
++
++		if (nla_parse_nested(tb, SWITCH_PORT_ATTR_MAX, nla,
++				port_policy))
++			return -EINVAL;
++
++		if (!tb[SWITCH_PORT_ID])
++			return -EINVAL;
++
++		port->id = nla_get_u32(tb[SWITCH_PORT_ID]);
++		if (tb[SWITCH_PORT_FLAG_TAGGED])
++			port->flags |= (1 << SWITCH_PORT_FLAG_TAGGED);
++		val->len++;
++	}
++
++	return 0;
++}
++
++static int
++swconfig_set_attr(struct sk_buff *skb, struct genl_info *info)
++{
++	const struct switch_attr *attr;
++	struct switch_dev *dev;
++	struct switch_val val;
++	int err = -EINVAL;
++
++	dev = swconfig_get_dev(info);
++	if (!dev)
++		return -EINVAL;
++
++	memset(&val, 0, sizeof(val));
++	attr = swconfig_lookup_attr(dev, info, &val);
++	if (!attr || !attr->set)
++		goto error;
++
++	val.attr = attr;
++	switch (attr->type) {
++	case SWITCH_TYPE_NOVAL:
++		break;
++	case SWITCH_TYPE_INT:
++		if (!info->attrs[SWITCH_ATTR_OP_VALUE_INT])
++			goto error;
++		val.value.i =
++			nla_get_u32(info->attrs[SWITCH_ATTR_OP_VALUE_INT]);
++		break;
++	case SWITCH_TYPE_STRING:
++		if (!info->attrs[SWITCH_ATTR_OP_VALUE_STR])
++			goto error;
++		val.value.s =
++			nla_data(info->attrs[SWITCH_ATTR_OP_VALUE_STR]);
++		break;
++	case SWITCH_TYPE_PORTS:
++		val.value.ports = dev->portbuf;
++		memset(dev->portbuf, 0,
++			sizeof(struct switch_port) * dev->ports);
++
++		/* TODO: implement multipart? */
++		if (info->attrs[SWITCH_ATTR_OP_VALUE_PORTS]) {
++			err = swconfig_parse_ports(skb,
++				info->attrs[SWITCH_ATTR_OP_VALUE_PORTS],
++				&val, dev->ports);
++			if (err < 0)
++				goto error;
++		} else {
++			val.len = 0;
++			err = 0;
++		}
++		break;
++	default:
++		goto error;
++	}
++
++	err = attr->set(dev, attr, &val);
++error:
++	swconfig_put_dev(dev);
++	return err;
++}
++
++static int
++swconfig_close_portlist(struct swconfig_callback *cb, void *arg)
++{
++	if (cb->nest[0])
++		nla_nest_end(cb->msg, cb->nest[0]);
++	return 0;
++}
++
++static int
++swconfig_send_port(struct swconfig_callback *cb, void *arg)
++{
++	const struct switch_port *port = arg;
++	struct nlattr *p = NULL;
++
++	if (!cb->nest[0]) {
++		cb->nest[0] = nla_nest_start(cb->msg, cb->cmd);
++		if (!cb->nest[0])
++			return -1;
++	}
++
++	p = nla_nest_start(cb->msg, SWITCH_ATTR_PORT);
++	if (!p)
++		goto error;
++
++	if (nla_put_u32(cb->msg, SWITCH_PORT_ID, port->id))
++		goto nla_put_failure;
++	if (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) {
++		if (nla_put_flag(cb->msg, SWITCH_PORT_FLAG_TAGGED))
++			goto nla_put_failure;
++	}
++
++	nla_nest_end(cb->msg, p);
++	return 0;
++
++nla_put_failure:
++		nla_nest_cancel(cb->msg, p);
++error:
++	nla_nest_cancel(cb->msg, cb->nest[0]);
++	return -1;
++}
++
++static int
++swconfig_send_ports(struct sk_buff **msg, struct genl_info *info, int attr,
++		const struct switch_val *val)
++{
++	struct swconfig_callback cb;
++	int err = 0;
++	int i;
++
++	if (!val->value.ports)
++		return -EINVAL;
++
++	memset(&cb, 0, sizeof(cb));
++	cb.cmd = attr;
++	cb.msg = *msg;
++	cb.info = info;
++	cb.fill = swconfig_send_port;
++	cb.close = swconfig_close_portlist;
++
++	cb.nest[0] = nla_nest_start(cb.msg, cb.cmd);
++	for (i = 0; i < val->len; i++) {
++		err = swconfig_send_multipart(&cb, &val->value.ports[i]);
++		if (err)
++			goto done;
++	}
++	err = val->len;
++	swconfig_close_portlist(&cb, NULL);
++	*msg = cb.msg;
++
++done:
++	return err;
++}
++
++static int
++swconfig_get_attr(struct sk_buff *skb, struct genl_info *info)
++{
++	struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
++	const struct switch_attr *attr;
++	struct switch_dev *dev;
++	struct sk_buff *msg = NULL;
++	struct switch_val val;
++	int err = -EINVAL;
++	int cmd = hdr->cmd;
++
++	dev = swconfig_get_dev(info);
++	if (!dev)
++		return -EINVAL;
++
++	memset(&val, 0, sizeof(val));
++	attr = swconfig_lookup_attr(dev, info, &val);
++	if (!attr || !attr->get)
++		goto error;
++
++	if (attr->type == SWITCH_TYPE_PORTS) {
++		val.value.ports = dev->portbuf;
++		memset(dev->portbuf, 0,
++			sizeof(struct switch_port) * dev->ports);
++	}
++
++	err = attr->get(dev, attr, &val);
++	if (err)
++		goto error;
++
++	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
++	if (!msg)
++		goto error;
++
++	hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq, &switch_fam,
++			0, cmd);
++	if (IS_ERR(hdr))
++		goto nla_put_failure;
++
++	switch (attr->type) {
++	case SWITCH_TYPE_INT:
++		if (nla_put_u32(msg, SWITCH_ATTR_OP_VALUE_INT, val.value.i))
++			goto nla_put_failure;
++		break;
++	case SWITCH_TYPE_STRING:
++		if (nla_put_string(msg, SWITCH_ATTR_OP_VALUE_STR, val.value.s))
++			goto nla_put_failure;
++		break;
++	case SWITCH_TYPE_PORTS:
++		err = swconfig_send_ports(&msg, info,
++				SWITCH_ATTR_OP_VALUE_PORTS, &val);
++		if (err < 0)
++			goto nla_put_failure;
++		break;
++	default:
++		pr_debug("invalid type in attribute\n");
++		err = -EINVAL;
++		goto error;
++	}
++	genlmsg_end(msg, hdr);
++	err = msg->len;
++	if (err < 0)
++		goto nla_put_failure;
++
++	swconfig_put_dev(dev);
++	return genlmsg_reply(msg, info);
++
++nla_put_failure:
++	if (msg)
++		nlmsg_free(msg);
++error:
++	swconfig_put_dev(dev);
++	if (!err)
++		err = -ENOMEM;
++	return err;
++}
++
++static int
++swconfig_send_switch(struct sk_buff *msg, u32 pid, u32 seq, int flags,
++		const struct switch_dev *dev)
++{
++	struct nlattr *p = NULL, *m = NULL;
++	void *hdr;
++	int i;
++
++	hdr = genlmsg_put(msg, pid, seq, &switch_fam, flags,
++			SWITCH_CMD_NEW_ATTR);
++	if (IS_ERR(hdr))
++		return -1;
++
++	if (nla_put_u32(msg, SWITCH_ATTR_ID, dev->id))
++		goto nla_put_failure;
++	if (nla_put_string(msg, SWITCH_ATTR_DEV_NAME, dev->devname))
++		goto nla_put_failure;
++	if (nla_put_string(msg, SWITCH_ATTR_ALIAS, dev->alias))
++		goto nla_put_failure;
++	if (nla_put_string(msg, SWITCH_ATTR_NAME, dev->name))
++		goto nla_put_failure;
++	if (nla_put_u32(msg, SWITCH_ATTR_VLANS, dev->vlans))
++		goto nla_put_failure;
++	if (nla_put_u32(msg, SWITCH_ATTR_PORTS, dev->ports))
++		goto nla_put_failure;
++	if (nla_put_u32(msg, SWITCH_ATTR_CPU_PORT, dev->cpu_port))
++		goto nla_put_failure;
++
++	m = nla_nest_start(msg, SWITCH_ATTR_PORTMAP);
++	if (!m)
++		goto nla_put_failure;
++	for (i = 0; i < dev->ports; i++) {
++		p = nla_nest_start(msg, SWITCH_ATTR_PORTS);
++		if (!p)
++			continue;
++		if (dev->portmap[i].s) {
++			if (nla_put_string(msg, SWITCH_PORTMAP_SEGMENT,
++						dev->portmap[i].s))
++				goto nla_put_failure;
++			if (nla_put_u32(msg, SWITCH_PORTMAP_VIRT,
++						dev->portmap[i].virt))
++				goto nla_put_failure;
++		}
++		nla_nest_end(msg, p);
++	}
++	nla_nest_end(msg, m);
++	genlmsg_end(msg, hdr);
++	return msg->len;
++nla_put_failure:
++	genlmsg_cancel(msg, hdr);
++	return -EMSGSIZE;
++}
++
++static int swconfig_dump_switches(struct sk_buff *skb,
++		struct netlink_callback *cb)
++{
++	struct switch_dev *dev;
++	int start = cb->args[0];
++	int idx = 0;
++
++	swconfig_lock();
++	list_for_each_entry(dev, &swdevs, dev_list) {
++		if (++idx <= start)
++			continue;
++		if (swconfig_send_switch(skb, NETLINK_CB(cb->skb).portid,
++				cb->nlh->nlmsg_seq, NLM_F_MULTI,
++				dev) < 0)
++			break;
++	}
++	swconfig_unlock();
++	cb->args[0] = idx;
++
++	return skb->len;
++}
++
++static int
++swconfig_done(struct netlink_callback *cb)
++{
++	return 0;
++}
++
++static struct genl_ops swconfig_ops[] = {
++	{
++		.cmd = SWITCH_CMD_LIST_GLOBAL,
++		.doit = swconfig_list_attrs,
++		.policy = switch_policy,
++	},
++	{
++		.cmd = SWITCH_CMD_LIST_VLAN,
++		.doit = swconfig_list_attrs,
++		.policy = switch_policy,
++	},
++	{
++		.cmd = SWITCH_CMD_LIST_PORT,
++		.doit = swconfig_list_attrs,
++		.policy = switch_policy,
++	},
++	{
++		.cmd = SWITCH_CMD_GET_GLOBAL,
++		.doit = swconfig_get_attr,
++		.policy = switch_policy,
++	},
++	{
++		.cmd = SWITCH_CMD_GET_VLAN,
++		.doit = swconfig_get_attr,
++		.policy = switch_policy,
++	},
++	{
++		.cmd = SWITCH_CMD_GET_PORT,
++		.doit = swconfig_get_attr,
++		.policy = switch_policy,
++	},
++	{
++		.cmd = SWITCH_CMD_SET_GLOBAL,
++		.doit = swconfig_set_attr,
++		.policy = switch_policy,
++	},
++	{
++		.cmd = SWITCH_CMD_SET_VLAN,
++		.doit = swconfig_set_attr,
++		.policy = switch_policy,
++	},
++	{
++		.cmd = SWITCH_CMD_SET_PORT,
++		.doit = swconfig_set_attr,
++		.policy = switch_policy,
++	},
++	{
++		.cmd = SWITCH_CMD_GET_SWITCH,
++		.dumpit = swconfig_dump_switches,
++		.policy = switch_policy,
++		.done = swconfig_done,
++	}
++};
++
++#ifdef CONFIG_OF
++void
++of_switch_load_portmap(struct switch_dev *dev)
++{
++	struct device_node *port;
++
++	if (!dev->of_node)
++		return;
++
++	for_each_child_of_node(dev->of_node, port) {
++		const __be32 *prop;
++		const char *segment;
++		int size, phys;
++
++		if (!of_device_is_compatible(port, "swconfig,port"))
++			continue;
++
++		if (of_property_read_string(port, "swconfig,segment", &segment))
++			continue;
++
++		prop = of_get_property(port, "swconfig,portmap", &size);
++		if (!prop)
++			continue;
++
++		if (size != (2 * sizeof(*prop))) {
++			pr_err("%s: failed to parse port mapping\n",
++					port->name);
++			continue;
++		}
++
++		phys = be32_to_cpup(prop++);
++		if ((phys < 0) | (phys >= dev->ports)) {
++			pr_err("%s: physical port index out of range\n",
++					port->name);
++			continue;
++		}
++
++		dev->portmap[phys].s = kstrdup(segment, GFP_KERNEL);
++		dev->portmap[phys].virt = be32_to_cpup(prop);
++		pr_debug("Found port: %s, physical: %d, virtual: %d\n",
++			segment, phys, dev->portmap[phys].virt);
++	}
++}
++#endif
++
++int
++register_switch(struct switch_dev *dev, struct net_device *netdev)
++{
++	struct switch_dev *sdev;
++	const int max_switches = 8 * sizeof(unsigned long);
++	unsigned long in_use = 0;
++	int err;
++	int i;
++
++	INIT_LIST_HEAD(&dev->dev_list);
++	if (netdev) {
++		dev->netdev = netdev;
++		if (!dev->alias)
++			dev->alias = netdev->name;
++	}
++	BUG_ON(!dev->alias);
++
++	if (dev->ports > 0) {
++		dev->portbuf = kzalloc(sizeof(struct switch_port) *
++				dev->ports, GFP_KERNEL);
++		if (!dev->portbuf)
++			return -ENOMEM;
++		dev->portmap = kzalloc(sizeof(struct switch_portmap) *
++				dev->ports, GFP_KERNEL);
++		if (!dev->portmap) {
++			kfree(dev->portbuf);
++			return -ENOMEM;
++		}
++	}
++	swconfig_defaults_init(dev);
++	mutex_init(&dev->sw_mutex);
++	swconfig_lock();
++	dev->id = ++swdev_id;
++
++	list_for_each_entry(sdev, &swdevs, dev_list) {
++		if (!sscanf(sdev->devname, SWCONFIG_DEVNAME, &i))
++			continue;
++		if (i < 0 || i > max_switches)
++			continue;
++
++		set_bit(i, &in_use);
++	}
++	i = find_first_zero_bit(&in_use, max_switches);
++
++	if (i == max_switches) {
++		swconfig_unlock();
++		return -ENFILE;
++	}
++
++#ifdef CONFIG_OF
++	if (dev->ports)
++		of_switch_load_portmap(dev);
++#endif
++
++	/* fill device name */
++	snprintf(dev->devname, IFNAMSIZ, SWCONFIG_DEVNAME, i);
++
++	list_add_tail(&dev->dev_list, &swdevs);
++	swconfig_unlock();
++
++	err = swconfig_create_led_trigger(dev);
++	if (err)
++		return err;
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(register_switch);
++
++void
++unregister_switch(struct switch_dev *dev)
++{
++	swconfig_destroy_led_trigger(dev);
++	kfree(dev->portbuf);
++	mutex_lock(&dev->sw_mutex);
++	swconfig_lock();
++	list_del(&dev->dev_list);
++	swconfig_unlock();
++	mutex_unlock(&dev->sw_mutex);
++}
++EXPORT_SYMBOL_GPL(unregister_switch);
++
++
++static int __init
++swconfig_init(void)
++{
++	int err;
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,13,0))
++	int i;
++#endif
++
++	INIT_LIST_HEAD(&swdevs);
++	
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,13,0))
++	err = genl_register_family(&switch_fam);
++	if (err)
++		return err;
++
++	for (i = 0; i < ARRAY_SIZE(swconfig_ops); i++) {
++		err = genl_register_ops(&switch_fam, &swconfig_ops[i]);
++		if (err)
++			goto unregister;
++	}
++	return 0;
++
++unregister:
++	genl_unregister_family(&switch_fam);
++	return err;
++#else
++	err = genl_register_family_with_ops(&switch_fam, swconfig_ops);
++	if (err)
++		return err;
++	return 0;
++#endif
++}
++
++static void __exit
++swconfig_exit(void)
++{
++	genl_unregister_family(&switch_fam);
++}
++
++module_init(swconfig_init);
++module_exit(swconfig_exit);
++
+diff -Nur linux-4.1.13.orig/drivers/net/phy/swconfig_leds.c linux-4.1.13/drivers/net/phy/swconfig_leds.c
+--- linux-4.1.13.orig/drivers/net/phy/swconfig_leds.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/net/phy/swconfig_leds.c	2015-12-04 21:45:30.824406773 +0100
+@@ -0,0 +1,354 @@
++/*
++ * swconfig_led.c: LED trigger support for the switch configuration API
++ *
++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ */
++
++#ifdef CONFIG_SWCONFIG_LEDS
++
++#include <linux/leds.h>
++#include <linux/ctype.h>
++#include <linux/device.h>
++#include <linux/workqueue.h>
++
++#define SWCONFIG_LED_TIMER_INTERVAL	(HZ / 10)
++#define SWCONFIG_LED_NUM_PORTS		32
++
++struct switch_led_trigger {
++	struct led_trigger trig;
++	struct switch_dev *swdev;
++
++	struct delayed_work sw_led_work;
++	u32 port_mask;
++	u32 port_link;
++	unsigned long port_traffic[SWCONFIG_LED_NUM_PORTS];
++};
++
++struct swconfig_trig_data {
++	struct led_classdev *led_cdev;
++	struct switch_dev *swdev;
++
++	rwlock_t lock;
++	u32 port_mask;
++
++	bool prev_link;
++	unsigned long prev_traffic;
++	enum led_brightness prev_brightness;
++};
++
++static void
++swconfig_trig_set_brightness(struct swconfig_trig_data *trig_data,
++			     enum led_brightness brightness)
++{
++	led_set_brightness(trig_data->led_cdev, brightness);
++	trig_data->prev_brightness = brightness;
++}
++
++static void
++swconfig_trig_update_port_mask(struct led_trigger *trigger)
++{
++	struct list_head *entry;
++	struct switch_led_trigger *sw_trig;
++	u32 port_mask;
++
++	if (!trigger)
++		return;
++
++	sw_trig = (void *) trigger;
++
++	port_mask = 0;
++	read_lock(&trigger->leddev_list_lock);
++	list_for_each(entry, &trigger->led_cdevs) {
++		struct led_classdev *led_cdev;
++		struct swconfig_trig_data *trig_data;
++
++		led_cdev = list_entry(entry, struct led_classdev, trig_list);
++		trig_data = led_cdev->trigger_data;
++		if (trig_data) {
++			read_lock(&trig_data->lock);
++			port_mask |= trig_data->port_mask;
++			read_unlock(&trig_data->lock);
++		}
++	}
++	read_unlock(&trigger->leddev_list_lock);
++
++	sw_trig->port_mask = port_mask;
++
++	if (port_mask)
++		schedule_delayed_work(&sw_trig->sw_led_work,
++				      SWCONFIG_LED_TIMER_INTERVAL);
++	else
++		cancel_delayed_work_sync(&sw_trig->sw_led_work);
++}
++
++static ssize_t
++swconfig_trig_port_mask_store(struct device *dev, struct device_attribute *attr,
++			      const char *buf, size_t size)
++{
++	struct led_classdev *led_cdev = dev_get_drvdata(dev);
++	struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
++	unsigned long port_mask;
++	ssize_t ret = -EINVAL;
++	char *after;
++	size_t count;
++
++	port_mask = simple_strtoul(buf, &after, 16);
++	count =	after - buf;
++
++	if (*after && isspace(*after))
++		count++;
++
++	if (count == size) {
++		bool changed;
++
++		write_lock(&trig_data->lock);
++
++		changed = (trig_data->port_mask != port_mask);
++		if (changed) {
++			trig_data->port_mask = port_mask;
++			if (port_mask == 0)
++				swconfig_trig_set_brightness(trig_data, LED_OFF);
++		}
++
++		write_unlock(&trig_data->lock);
++
++		if (changed)
++			swconfig_trig_update_port_mask(led_cdev->trigger);
++
++		ret = count;
++	}
++
++	return ret;
++}
++
++static ssize_t
++swconfig_trig_port_mask_show(struct device *dev, struct device_attribute *attr,
++			     char *buf)
++{
++	struct led_classdev *led_cdev = dev_get_drvdata(dev);
++	struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
++
++	read_lock(&trig_data->lock);
++	sprintf(buf, "%#x\n", trig_data->port_mask);
++	read_unlock(&trig_data->lock);
++
++	return strlen(buf) + 1;
++}
++
++static DEVICE_ATTR(port_mask, 0644, swconfig_trig_port_mask_show,
++		   swconfig_trig_port_mask_store);
++
++static void
++swconfig_trig_activate(struct led_classdev *led_cdev)
++{
++	struct switch_led_trigger *sw_trig;
++	struct swconfig_trig_data *trig_data;
++	int err;
++
++	if (led_cdev->trigger->activate != swconfig_trig_activate)
++		return;
++
++	trig_data = kzalloc(sizeof(struct swconfig_trig_data), GFP_KERNEL);
++	if (!trig_data)
++		return;
++
++	sw_trig = (void *) led_cdev->trigger;
++
++	rwlock_init(&trig_data->lock);
++	trig_data->led_cdev = led_cdev;
++	trig_data->swdev = sw_trig->swdev;
++	led_cdev->trigger_data = trig_data;
++
++	err = device_create_file(led_cdev->dev, &dev_attr_port_mask);
++	if (err)
++		goto err_free;
++
++	return;
++
++err_free:
++	led_cdev->trigger_data = NULL;
++	kfree(trig_data);
++}
++
++static void
++swconfig_trig_deactivate(struct led_classdev *led_cdev)
++{
++	struct swconfig_trig_data *trig_data;
++
++	swconfig_trig_update_port_mask(led_cdev->trigger);
++
++	trig_data = (void *) led_cdev->trigger_data;
++	if (trig_data) {
++		device_remove_file(led_cdev->dev, &dev_attr_port_mask);
++		kfree(trig_data);
++	}
++}
++
++static void
++swconfig_trig_led_event(struct switch_led_trigger *sw_trig,
++			struct led_classdev *led_cdev)
++{
++	struct swconfig_trig_data *trig_data;
++	u32 port_mask;
++	bool link;
++
++	trig_data = led_cdev->trigger_data;
++	if (!trig_data)
++		return;
++
++	read_lock(&trig_data->lock);
++	port_mask = trig_data->port_mask;
++	read_unlock(&trig_data->lock);
++
++	link = !!(sw_trig->port_link & port_mask);
++	if (!link) {
++		if (link != trig_data->prev_link)
++			swconfig_trig_set_brightness(trig_data, LED_OFF);
++	} else {
++		unsigned long traffic;
++		int i;
++
++		traffic = 0;
++		for (i = 0; i < SWCONFIG_LED_NUM_PORTS; i++) {
++			if (port_mask & (1 << i))
++				traffic += sw_trig->port_traffic[i];
++		}
++
++		if (trig_data->prev_brightness != LED_FULL)
++			swconfig_trig_set_brightness(trig_data, LED_FULL);
++		else if (traffic != trig_data->prev_traffic)
++			swconfig_trig_set_brightness(trig_data, LED_OFF);
++
++		trig_data->prev_traffic = traffic;
++	}
++
++	trig_data->prev_link = link;
++}
++
++static void
++swconfig_trig_update_leds(struct switch_led_trigger *sw_trig)
++{
++	struct list_head *entry;
++	struct led_trigger *trigger;
++
++	trigger = &sw_trig->trig;
++	read_lock(&trigger->leddev_list_lock);
++	list_for_each(entry, &trigger->led_cdevs) {
++		struct led_classdev *led_cdev;
++
++		led_cdev = list_entry(entry, struct led_classdev, trig_list);
++		swconfig_trig_led_event(sw_trig, led_cdev);
++	}
++	read_unlock(&trigger->leddev_list_lock);
++}
++
++static void
++swconfig_led_work_func(struct work_struct *work)
++{
++	struct switch_led_trigger *sw_trig;
++	struct switch_dev *swdev;
++	u32 port_mask;
++	u32 link;
++	int i;
++
++	sw_trig = container_of(work, struct switch_led_trigger,
++			       sw_led_work.work);
++
++	port_mask = sw_trig->port_mask;
++	swdev = sw_trig->swdev;
++
++	link = 0;
++	for (i = 0; i < SWCONFIG_LED_NUM_PORTS; i++) {
++		u32 port_bit;
++
++		port_bit = BIT(i);
++		if ((port_mask & port_bit) == 0)
++			continue;
++
++		if (swdev->ops->get_port_link) {
++			struct switch_port_link port_link;
++
++			memset(&port_link, '\0', sizeof(port_link));
++			swdev->ops->get_port_link(swdev, i, &port_link);
++
++			if (port_link.link)
++				link |= port_bit;
++		}
++
++		if (swdev->ops->get_port_stats) {
++			struct switch_port_stats port_stats;
++
++			memset(&port_stats, '\0', sizeof(port_stats));
++			swdev->ops->get_port_stats(swdev, i, &port_stats);
++			sw_trig->port_traffic[i] = port_stats.tx_bytes +
++						   port_stats.rx_bytes;
++		}
++	}
++
++	sw_trig->port_link = link;
++
++	swconfig_trig_update_leds(sw_trig);
++
++	schedule_delayed_work(&sw_trig->sw_led_work,
++			      SWCONFIG_LED_TIMER_INTERVAL);
++}
++
++static int
++swconfig_create_led_trigger(struct switch_dev *swdev)
++{
++	struct switch_led_trigger *sw_trig;
++	int err;
++
++	if (!swdev->ops->get_port_link)
++		return 0;
++
++	sw_trig = kzalloc(sizeof(struct switch_led_trigger), GFP_KERNEL);
++	if (!sw_trig)
++		return -ENOMEM;
++
++	sw_trig->swdev = swdev;
++	sw_trig->trig.name = swdev->devname;
++	sw_trig->trig.activate = swconfig_trig_activate;
++	sw_trig->trig.deactivate = swconfig_trig_deactivate;
++
++	INIT_DELAYED_WORK(&sw_trig->sw_led_work, swconfig_led_work_func);
++
++	err = led_trigger_register(&sw_trig->trig);
++	if (err)
++		goto err_free;
++
++	swdev->led_trigger = sw_trig;
++
++	return 0;
++
++err_free:
++	kfree(sw_trig);
++	return err;
++}
++
++static void
++swconfig_destroy_led_trigger(struct switch_dev *swdev)
++{
++	struct switch_led_trigger *sw_trig;
++
++	sw_trig = swdev->led_trigger;
++	if (sw_trig) {
++		cancel_delayed_work_sync(&sw_trig->sw_led_work);
++		led_trigger_unregister(&sw_trig->trig);
++		kfree(sw_trig);
++	}
++}
++
++#else /* SWCONFIG_LEDS */
++static inline int
++swconfig_create_led_trigger(struct switch_dev *swdev) { return 0; }
++
++static inline void
++swconfig_destroy_led_trigger(struct switch_dev *swdev) { }
++#endif /* CONFIG_SWCONFIG_LEDS */
+diff -Nur linux-4.1.13.orig/drivers/spi/Kconfig linux-4.1.13/drivers/spi/Kconfig
+--- linux-4.1.13.orig/drivers/spi/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/spi/Kconfig	2015-12-04 19:57:03.922108288 +0100
+@@ -59,6 +59,14 @@
+ 	help
+ 	  This is the driver for the Altera SPI Controller.
+ 
++config SPI_AP83
++	tristate "Atheros AP83 specific SPI Controller"
++	depends on SPI_MASTER && ATH79_MACH_AP83
++	select SPI_BITBANG
++	help
++	  This is a specific SPI controller driver for the Atheros AP83
++	  reference board.
++
+ config SPI_ATH79
+ 	tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
+ 	depends on ATH79 && GPIOLIB
+@@ -448,6 +456,12 @@
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called spi_qup.
+ 
++config SPI_RB4XX
++	tristate "Mikrotik RB4XX SPI master"
++	depends on SPI_MASTER && ATH79_MACH_RB4XX
++	help
++	  SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+ 	tristate "Samsung S3C24XX series SPI"
+ 	depends on ARCH_S3C24XX
+@@ -661,6 +675,18 @@
+ 	  sysfs interface, with each line presented as a kind of GPIO
+ 	  exposing both switch control and diagnostic feedback.
+ 
++config SPI_RB4XX_CPLD
++	tristate "MikroTik RB4XX CPLD driver"
++	depends on ATH79_MACH_RB4XX
++	help
++	  SPI driver for the Xilinx CPLD chip present on the
++	  MikroTik RB4xx boards.
++
++config SPI_VSC7385
++	tristate "Vitesse VSC7385 ethernet switch driver"
++	help
++	  SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+diff -Nur linux-4.1.13.orig/drivers/spi/Makefile linux-4.1.13/drivers/spi/Makefile
+--- linux-4.1.13.orig/drivers/spi/Makefile	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/spi/Makefile	2015-12-04 19:57:03.922108288 +0100
+@@ -12,6 +12,7 @@
+ # SPI master controller drivers (bus)
+ obj-$(CONFIG_SPI_ALTERA)		+= spi-altera.o
+ obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
++obj-$(CONFIG_SPI_AP83)			+= spi-ap83.o
+ obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
+ obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
+ obj-$(CONFIG_SPI_BCM2835)		+= spi-bcm2835.o
+@@ -64,6 +65,8 @@
+ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA)	+= spi-pxa2xx-dma.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RB4XX)			+= spi-rb4xx.o
++obj-$(CONFIG_SPI_RB4XX_CPLD)		+= spi-rb4xx-cpld.o
+ obj-$(CONFIG_SPI_QUP)			+= spi-qup.o
+ obj-$(CONFIG_SPI_ROCKCHIP)		+= spi-rockchip.o
+ obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
+@@ -86,6 +89,7 @@
+ obj-$(CONFIG_SPI_TLE62X0)		+= spi-tle62x0.o
+ obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
++obj-$(CONFIG_SPI_VSC7385)		+= spi-vsc7385.o
+ obj-$(CONFIG_SPI_XCOMM)		+= spi-xcomm.o
+ obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
+ obj-$(CONFIG_SPI_XTENSA_XTFPGA)		+= spi-xtensa-xtfpga.o
+diff -Nur linux-4.1.13.orig/drivers/spi/spi-ap83.c linux-4.1.13/drivers/spi/spi-ap83.c
+--- linux-4.1.13.orig/drivers/spi/spi-ap83.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/spi/spi-ap83.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,283 @@
++/*
++ * Atheros AP83 board specific SPI Controller driver
++ *
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/bitops.h>
++#include <linux/gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++
++#define DRV_DESC	"Atheros AP83 board SPI Controller driver"
++#define DRV_VERSION	"0.1.0"
++#define DRV_NAME	"ap83-spi"
++
++#define AP83_SPI_CLK_HIGH	(1 << 23)
++#define AP83_SPI_CLK_LOW	0
++#define AP83_SPI_MOSI_HIGH	(1 << 22)
++#define AP83_SPI_MOSI_LOW	0
++
++#define AP83_SPI_GPIO_CS	1
++#define AP83_SPI_GPIO_MISO	3
++
++struct ap83_spi {
++	struct	spi_bitbang	bitbang;
++	void __iomem		*base;
++	u32			addr;
++
++	struct platform_device	*pdev;
++};
++
++static inline u32 ap83_spi_rr(struct ap83_spi *sp, u32 reg)
++{
++	return __raw_readl(sp->base + reg);
++}
++
++static inline struct ap83_spi *spidev_to_sp(struct spi_device *spi)
++{
++	return spi_master_get_devdata(spi->master);
++}
++
++static inline void setsck(struct spi_device *spi, int val)
++{
++	struct ap83_spi *sp = spidev_to_sp(spi);
++
++	if (val)
++		sp->addr |= AP83_SPI_CLK_HIGH;
++	else
++		sp->addr &= ~AP83_SPI_CLK_HIGH;
++
++	dev_dbg(&spi->dev, "addr=%08x,  SCK set to %s\n",
++		sp->addr, (val) ? "HIGH" : "LOW");
++
++	ap83_spi_rr(sp, sp->addr);
++}
++
++static inline void setmosi(struct spi_device *spi, int val)
++{
++	struct ap83_spi *sp = spidev_to_sp(spi);
++
++	if (val)
++		sp->addr |= AP83_SPI_MOSI_HIGH;
++	else
++		sp->addr &= ~AP83_SPI_MOSI_HIGH;
++
++	dev_dbg(&spi->dev, "addr=%08x, MOSI set to %s\n",
++		sp->addr, (val) ? "HIGH" : "LOW");
++
++	ap83_spi_rr(sp, sp->addr);
++}
++
++static inline u32 getmiso(struct spi_device *spi)
++{
++	u32 ret;
++
++	ret = gpio_get_value(AP83_SPI_GPIO_MISO) ? 1 : 0;
++	dev_dbg(&spi->dev, "get MISO: %d\n", ret);
++
++	return ret;
++}
++
++static inline void do_spidelay(struct spi_device *spi, unsigned nsecs)
++{
++	ndelay(nsecs);
++}
++
++static void ap83_spi_chipselect(struct spi_device *spi, int on)
++{
++	struct ap83_spi *sp = spidev_to_sp(spi);
++
++	dev_dbg(&spi->dev, "set CS to %d\n", (on) ? 0 : 1);
++
++	if (on) {
++		ath79_flash_acquire();
++
++		sp->addr = 0;
++		ap83_spi_rr(sp, sp->addr);
++
++		gpio_set_value(AP83_SPI_GPIO_CS, 0);
++	} else {
++		gpio_set_value(AP83_SPI_GPIO_CS, 1);
++		ath79_flash_release();
++	}
++}
++
++#define spidelay(nsecs)							\
++	do {								\
++		/* Steal the spi_device pointer from our caller.	\
++		 * The bitbang-API should probably get fixed here... */	\
++		do_spidelay(spi, nsecs);				\
++	} while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++#include "spi-bitbang-txrx.h"
++
++static u32 ap83_spi_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	dev_dbg(&spi->dev, "TXRX0 word=%08x, bits=%u\n", word, bits);
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
++}
++
++static u32 ap83_spi_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	dev_dbg(&spi->dev, "TXRX1 word=%08x, bits=%u\n", word, bits);
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
++}
++
++static u32 ap83_spi_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	dev_dbg(&spi->dev, "TXRX2 word=%08x, bits=%u\n", word, bits);
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
++}
++
++static u32 ap83_spi_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	dev_dbg(&spi->dev, "TXRX3 word=%08x, bits=%u\n", word, bits);
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
++}
++
++static int ap83_spi_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct ap83_spi *sp;
++	struct ap83_spi_platform_data *pdata;
++	struct resource	*r;
++	int ret;
++
++	ret = gpio_request(AP83_SPI_GPIO_MISO, "spi-miso");
++	if (ret) {
++		dev_err(&pdev->dev, "gpio request failed for MISO\n");
++		return ret;
++	}
++
++	ret = gpio_request(AP83_SPI_GPIO_CS, "spi-cs");
++	if (ret) {
++		dev_err(&pdev->dev, "gpio request failed for CS\n");
++		goto err_free_miso;
++	}
++
++	ret = gpio_direction_input(AP83_SPI_GPIO_MISO);
++	if (ret) {
++		dev_err(&pdev->dev, "unable to set direction of MISO\n");
++		goto err_free_cs;
++	}
++
++	ret = gpio_direction_output(AP83_SPI_GPIO_CS, 0);
++	if (ret) {
++		dev_err(&pdev->dev, "unable to set direction of CS\n");
++		goto err_free_cs;
++	}
++
++	master = spi_alloc_master(&pdev->dev, sizeof(*sp));
++	if (master == NULL) {
++		dev_err(&pdev->dev, "failed to allocate spi master\n");
++		return -ENOMEM;
++	}
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++
++	pdata = pdev->dev.platform_data;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.chipselect = ap83_spi_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = ap83_spi_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = ap83_spi_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = ap83_spi_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = ap83_spi_txrx_mode3;
++
++	sp->bitbang.master->bus_num = pdev->id;
++	sp->bitbang.master->num_chipselect = 1;
++
++	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (r == NULL) {
++		ret = -ENOENT;
++		goto err_spi_put;
++	}
++
++	sp->base = ioremap_nocache(r->start, r->end - r->start + 1);
++	if (!sp->base) {
++		ret = -ENXIO;
++		goto err_spi_put;
++	}
++
++	ret = spi_bitbang_start(&sp->bitbang);
++	if (!ret)
++		goto err_unmap;
++
++	dev_info(&pdev->dev, "AP83 SPI adapter at %08x\n", r->start);
++
++	return 0;
++
++err_unmap:
++	iounmap(sp->base);
++err_spi_put:
++	platform_set_drvdata(pdev, NULL);
++	spi_master_put(sp->bitbang.master);
++
++err_free_cs:
++	gpio_free(AP83_SPI_GPIO_CS);
++err_free_miso:
++	gpio_free(AP83_SPI_GPIO_MISO);
++	return ret;
++}
++
++static int ap83_spi_remove(struct platform_device *pdev)
++{
++	struct ap83_spi *sp = platform_get_drvdata(pdev);
++
++	spi_bitbang_stop(&sp->bitbang);
++	iounmap(sp->base);
++	platform_set_drvdata(pdev, NULL);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver ap83_spi_drv = {
++	.probe		= ap83_spi_probe,
++	.remove		= ap83_spi_remove,
++	.driver		= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init ap83_spi_init(void)
++{
++	return platform_driver_register(&ap83_spi_drv);
++}
++module_init(ap83_spi_init);
++
++static void __exit ap83_spi_exit(void)
++{
++	platform_driver_unregister(&ap83_spi_drv);
++}
++module_exit(ap83_spi_exit);
++
++MODULE_ALIAS("platform:" DRV_NAME);
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-4.1.13.orig/drivers/spi/spi-ath79.c linux-4.1.13/drivers/spi/spi-ath79.c
+--- linux-4.1.13.orig/drivers/spi/spi-ath79.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/spi/spi-ath79.c	2015-12-04 19:57:03.966105410 +0100
+@@ -33,6 +33,13 @@
+ #define ATH79_SPI_RRW_DELAY_FACTOR	12000
+ #define MHZ				(1000 * 1000)
+ 
++#define ATH79_SPI_CS_LINE_MAX		2
++
++enum ath79_spi_state {
++	ATH79_SPI_STATE_WAIT_CMD = 0,
++	ATH79_SPI_STATE_WAIT_READ,
++};
++
+ struct ath79_spi {
+ 	struct spi_bitbang	bitbang;
+ 	u32			ioc_base;
+@@ -40,6 +47,11 @@
+ 	void __iomem		*base;
+ 	struct clk		*clk;
+ 	unsigned		rrw_delay;
++
++	enum ath79_spi_state	state;
++	u32			clk_div;
++	unsigned long 		read_addr;
++	unsigned long		ahb_rate;
+ };
+ 
+ static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
+@@ -67,6 +79,7 @@
+ {
+ 	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ 	int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
++	struct ath79_spi_controller_data *cdata = spi->controller_data;
+ 
+ 	if (is_active) {
+ 		/* set initial clock polarity */
+@@ -78,20 +91,24 @@
+ 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+ 	}
+ 
+-	if (spi->chip_select) {
+-		struct ath79_spi_controller_data *cdata = spi->controller_data;
+-
+-		/* SPI is normally active-low */
+-		gpio_set_value(cdata->gpio, cs_high);
+-	} else {
++	switch (cdata->cs_type) {
++	case ATH79_SPI_CS_TYPE_INTERNAL:
+ 		if (cs_high)
+-			sp->ioc_base |= AR71XX_SPI_IOC_CS0;
++			sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
+ 		else
+-			sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
++			sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
+ 
+ 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+-	}
++		break;
+ 
++	case ATH79_SPI_CS_TYPE_GPIO:
++		/* SPI is normally active-low */
++		if (gpio_cansleep(cdata->cs_line))
++			gpio_set_value_cansleep(cdata->cs_line, cs_high);
++		else
++			gpio_set_value(cdata->cs_line, cs_high);
++		break;
++	}
+ }
+ 
+ static void ath79_spi_enable(struct ath79_spi *sp)
+@@ -102,9 +119,6 @@
+ 	/* save CTRL register */
+ 	sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
+ 	sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
+-
+-	/* TODO: setup speed? */
+-	ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+ }
+ 
+ static void ath79_spi_disable(struct ath79_spi *sp)
+@@ -118,24 +132,30 @@
+ static int ath79_spi_setup_cs(struct spi_device *spi)
+ {
+ 	struct ath79_spi_controller_data *cdata;
++	unsigned long flags;
+ 	int status;
+ 
+ 	cdata = spi->controller_data;
+-	if (spi->chip_select && !cdata)
++	if (!cdata)
+ 		return -EINVAL;
+ 
+ 	status = 0;
+-	if (spi->chip_select) {
+-		unsigned long flags;
++	switch (cdata->cs_type) {
++	case ATH79_SPI_CS_TYPE_INTERNAL:
++		if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
++			status = -EINVAL;
++		break;
+ 
++	case ATH79_SPI_CS_TYPE_GPIO:
+ 		flags = GPIOF_DIR_OUT;
+ 		if (spi->mode & SPI_CS_HIGH)
+ 			flags |= GPIOF_INIT_LOW;
+ 		else
+ 			flags |= GPIOF_INIT_HIGH;
+ 
+-		status = gpio_request_one(cdata->gpio, flags,
++		status = gpio_request_one(cdata->cs_line, flags,
+ 					  dev_name(&spi->dev));
++		break;
+ 	}
+ 
+ 	return status;
+@@ -143,9 +163,19 @@
+ 
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+-	if (spi->chip_select) {
+-		struct ath79_spi_controller_data *cdata = spi->controller_data;
+-		gpio_free(cdata->gpio);
++	struct ath79_spi_controller_data *cdata;
++
++	cdata = spi->controller_data;
++	if (!cdata)
++		return;
++
++	switch (cdata->cs_type) {
++	case ATH79_SPI_CS_TYPE_INTERNAL:
++		/* nothing to do */
++		break;
++	case ATH79_SPI_CS_TYPE_GPIO:
++		gpio_free(cdata->cs_line);
++		break;
+ 	}
+ }
+ 
+@@ -201,6 +231,114 @@
+ 	return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
+ }
+ 
++static int ath79_spi_do_read_flash_data(struct spi_device *spi,
++					struct spi_transfer *t)
++{
++	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++
++	/* disable GPIO mode */
++	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++
++	memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len);
++
++	/* enable GPIO mode */
++	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
++
++	/* restore IOC register */
++	ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
++
++	return t->len;
++}
++
++static int ath79_spi_do_read_flash_cmd(struct spi_device *spi,
++				       struct spi_transfer *t)
++{
++	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++	int len;
++	const u8 *p;
++
++	sp->read_addr = 0;
++
++	len = t->len - 1;
++
++	if (t->dummy)
++		len -= 1;
++
++	p = t->tx_buf;
++
++	while (len--) {
++		p++;
++		sp->read_addr <<= 8;
++		sp->read_addr |= *p;
++	}
++
++	return t->len;
++}
++
++static bool ath79_spi_is_read_cmd(struct spi_device *spi,
++				 struct spi_transfer *t)
++{
++	return t->type == SPI_TRANSFER_FLASH_READ_CMD;
++}
++
++static bool ath79_spi_is_data_read(struct spi_device *spi,
++				  struct spi_transfer *t)
++{
++	return t->type == SPI_TRANSFER_FLASH_READ_DATA;
++}
++
++static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++	int ret;
++
++	switch (sp->state) {
++	case ATH79_SPI_STATE_WAIT_CMD:
++		if (ath79_spi_is_read_cmd(spi, t)) {
++			ret = ath79_spi_do_read_flash_cmd(spi, t);
++			sp->state = ATH79_SPI_STATE_WAIT_READ;
++		} else {
++			ret = spi_bitbang_bufs(spi, t);
++		}
++		break;
++
++	case ATH79_SPI_STATE_WAIT_READ:
++		if (ath79_spi_is_data_read(spi, t)) {
++			ret = ath79_spi_do_read_flash_data(spi, t);
++		} else {
++			dev_warn(&spi->dev, "flash data read expected\n");
++			ret = -EIO;
++		}
++		sp->state = ATH79_SPI_STATE_WAIT_CMD;
++		break;
++
++	default:
++		BUG();
++	}
++
++	return ret;
++}
++
++static int ath79_spi_setup_transfer(struct spi_device *spi,
++				    struct spi_transfer *t)
++{
++	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++	struct ath79_spi_controller_data *cdata;
++	int ret;
++
++	ret = spi_bitbang_setup_transfer(spi, t);
++	if (ret)
++		return ret;
++
++	cdata = spi->controller_data;
++	if (cdata->is_flash)
++		sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs;
++	else
++		sp->bitbang.txrx_bufs = spi_bitbang_bufs;
++
++	return ret;
++}
++
+ static int ath79_spi_probe(struct platform_device *pdev)
+ {
+ 	struct spi_master *master;
+@@ -210,6 +348,10 @@
+ 	unsigned long rate;
+ 	int ret;
+ 
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -EINVAL;
++
+ 	master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+ 	if (master == NULL) {
+ 		dev_err(&pdev->dev, "failed to allocate spi master\n");
+@@ -219,20 +361,18 @@
+ 	sp = spi_master_get_devdata(master);
+ 	platform_set_drvdata(pdev, sp);
+ 
+-	pdata = dev_get_platdata(&pdev->dev);
++	sp->state = ATH79_SPI_STATE_WAIT_CMD;
+ 
+ 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+ 	master->setup = ath79_spi_setup;
+ 	master->cleanup = ath79_spi_cleanup;
+-	if (pdata) {
+-		master->bus_num = pdata->bus_num;
+-		master->num_chipselect = pdata->num_chipselect;
+-	}
++	master->bus_num = pdata->bus_num;
++	master->num_chipselect = pdata->num_chipselect;
+ 
+ 	sp->bitbang.master = master;
+ 	sp->bitbang.chipselect = ath79_spi_chipselect;
+ 	sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
+-	sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
++	sp->bitbang.setup_transfer = ath79_spi_setup_transfer;
+ 	sp->bitbang.flags = SPI_CS_HIGH;
+ 
+ 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+@@ -257,7 +397,8 @@
+ 	if (ret)
+ 		goto err_put_master;
+ 
+-	rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
++	sp->ahb_rate = clk_get_rate(sp->clk);
++	rate = DIV_ROUND_UP(sp->ahb_rate, MHZ);
+ 	if (!rate) {
+ 		ret = -EINVAL;
+ 		goto err_clk_disable;
+diff -Nur linux-4.1.13.orig/drivers/spi/spi-bitbang.c linux-4.1.13/drivers/spi/spi-bitbang.c
+--- linux-4.1.13.orig/drivers/spi/spi-bitbang.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/spi/spi-bitbang.c	2015-12-04 19:57:03.934107503 +0100
+@@ -230,13 +230,14 @@
+ }
+ EXPORT_SYMBOL_GPL(spi_bitbang_cleanup);
+ 
+-static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
++int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
+ {
+ 	struct spi_bitbang_cs	*cs = spi->controller_state;
+ 	unsigned		nsecs = cs->nsecs;
+ 
+ 	return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t);
+ }
++EXPORT_SYMBOL_GPL(spi_bitbang_bufs);
+ 
+ /*----------------------------------------------------------------------*/
+ 
+diff -Nur linux-4.1.13.orig/drivers/spi/spi-rb4xx.c linux-4.1.13/drivers/spi/spi-rb4xx.c
+--- linux-4.1.13.orig/drivers/spi/spi-rb4xx.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/spi/spi-rb4xx.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,507 @@
++/*
++ * SPI controller driver for the Mikrotik RB4xx boards
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was based on the patches for Linux 2.6.27.39 published by
++ * MikroTik for their RouterBoard 4xx series devices.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#define DRV_NAME	"rb4xx-spi"
++#define DRV_DESC	"Mikrotik RB4xx SPI controller driver"
++#define DRV_VERSION	"0.1.0"
++
++#define SPI_CTRL_FASTEST	0x40
++#define SPI_FLASH_HZ		33333334
++#define SPI_CPLD_HZ		33333334
++
++#define CPLD_CMD_READ_FAST	0x0b
++
++#undef RB4XX_SPI_DEBUG
++
++struct rb4xx_spi {
++	void __iomem		*base;
++	struct spi_master	*master;
++
++	unsigned		spi_ctrl_flash;
++	unsigned		spi_ctrl_fread;
++
++	struct clk		*ahb_clk;
++	unsigned long		ahb_freq;
++
++	spinlock_t		lock;
++	struct list_head	queue;
++	int			busy:1;
++	int			cs_wait;
++};
++
++static unsigned spi_clk_low = AR71XX_SPI_IOC_CS1;
++
++#ifdef RB4XX_SPI_DEBUG
++static inline void do_spi_delay(void)
++{
++	ndelay(20000);
++}
++#else
++static inline void do_spi_delay(void) { }
++#endif
++
++static inline void do_spi_init(struct spi_device *spi)
++{
++	unsigned cs = AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1;
++
++	if (!(spi->mode & SPI_CS_HIGH))
++		cs ^= (spi->chip_select == 2) ? AR71XX_SPI_IOC_CS1 :
++						AR71XX_SPI_IOC_CS0;
++
++	spi_clk_low = cs;
++}
++
++static inline void do_spi_finish(void __iomem *base)
++{
++	do_spi_delay();
++	__raw_writel(AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1,
++		     base + AR71XX_SPI_REG_IOC);
++}
++
++static inline void do_spi_clk(void __iomem *base, int bit)
++{
++	unsigned bval = spi_clk_low | ((bit & 1) ? AR71XX_SPI_IOC_DO : 0);
++
++	do_spi_delay();
++	__raw_writel(bval, base + AR71XX_SPI_REG_IOC);
++	do_spi_delay();
++	__raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC);
++}
++
++static void do_spi_byte(void __iomem *base, unsigned char byte)
++{
++	do_spi_clk(base, byte >> 7);
++	do_spi_clk(base, byte >> 6);
++	do_spi_clk(base, byte >> 5);
++	do_spi_clk(base, byte >> 4);
++	do_spi_clk(base, byte >> 3);
++	do_spi_clk(base, byte >> 2);
++	do_spi_clk(base, byte >> 1);
++	do_spi_clk(base, byte);
++
++	pr_debug("spi_byte sent 0x%02x got 0x%02x\n",
++	       (unsigned)byte,
++	       (unsigned char)__raw_readl(base + AR71XX_SPI_REG_RDS));
++}
++
++static inline void do_spi_clk_fast(void __iomem *base, unsigned bit1,
++				   unsigned bit2)
++{
++	unsigned bval = (spi_clk_low |
++			 ((bit1 & 1) ? AR71XX_SPI_IOC_DO : 0) |
++			 ((bit2 & 1) ? AR71XX_SPI_IOC_CS2 : 0));
++	do_spi_delay();
++	__raw_writel(bval, base + AR71XX_SPI_REG_IOC);
++	do_spi_delay();
++	__raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC);
++}
++
++static void do_spi_byte_fast(void __iomem *base, unsigned char byte)
++{
++	do_spi_clk_fast(base, byte >> 7, byte >> 6);
++	do_spi_clk_fast(base, byte >> 5, byte >> 4);
++	do_spi_clk_fast(base, byte >> 3, byte >> 2);
++	do_spi_clk_fast(base, byte >> 1, byte >> 0);
++
++	pr_debug("spi_byte_fast sent 0x%02x got 0x%02x\n",
++	       (unsigned)byte,
++	       (unsigned char) __raw_readl(base + AR71XX_SPI_REG_RDS));
++}
++
++static int rb4xx_spi_txrx(void __iomem *base, struct spi_transfer *t)
++{
++	const unsigned char *rxv_ptr = NULL;
++	const unsigned char *tx_ptr = t->tx_buf;
++	unsigned char *rx_ptr = t->rx_buf;
++	unsigned i;
++
++	pr_debug("spi_txrx len %u tx %u rx %u\n",
++	       t->len,
++	       (t->tx_buf ? 1 : 0),
++	       (t->rx_buf ? 1 : 0));
++
++	if (t->verify) {
++		rxv_ptr = tx_ptr;
++		tx_ptr = NULL;
++	}
++
++	for (i = 0; i < t->len; ++i) {
++		unsigned char sdata = tx_ptr ? tx_ptr[i] : 0;
++
++		if (t->fast_write)
++			do_spi_byte_fast(base, sdata);
++		else
++			do_spi_byte(base, sdata);
++
++		if (rx_ptr) {
++			rx_ptr[i] = __raw_readl(base + AR71XX_SPI_REG_RDS) & 0xff;
++		} else if (rxv_ptr) {
++			unsigned char c = __raw_readl(base + AR71XX_SPI_REG_RDS);
++			if (rxv_ptr[i] != c)
++				return i;
++		}
++	}
++
++	return i;
++}
++
++static int rb4xx_spi_read_fast(struct rb4xx_spi *rbspi,
++			       struct spi_message *m)
++{
++	struct spi_transfer *t;
++	const unsigned char *tx_ptr;
++	unsigned addr;
++	void __iomem *base = rbspi->base;
++
++	/* check for exactly two transfers */
++	if (list_empty(&m->transfers) ||
++	    list_is_last(m->transfers.next, &m->transfers) ||
++	    !list_is_last(m->transfers.next->next, &m->transfers)) {
++		return -1;
++	}
++
++	/* first transfer contains command and address  */
++	t = list_entry(m->transfers.next,
++		       struct spi_transfer, transfer_list);
++
++	if (t->len != 5 || t->tx_buf == NULL)
++		return -1;
++
++	tx_ptr = t->tx_buf;
++	if (tx_ptr[0] != CPLD_CMD_READ_FAST)
++		return -1;
++
++	addr = tx_ptr[1];
++	addr = tx_ptr[2] | (addr << 8);
++	addr = tx_ptr[3] | (addr << 8);
++	addr += (unsigned) base;
++
++	m->actual_length += t->len;
++
++	/* second transfer contains data itself */
++	t = list_entry(m->transfers.next->next,
++		       struct spi_transfer, transfer_list);
++
++	if (t->tx_buf && !t->verify)
++		return -1;
++
++	__raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
++	__raw_writel(rbspi->spi_ctrl_fread, base + AR71XX_SPI_REG_CTRL);
++	__raw_writel(0, base + AR71XX_SPI_REG_FS);
++
++	if (t->rx_buf) {
++		memcpy(t->rx_buf, (const void *)addr, t->len);
++	} else if (t->tx_buf) {
++		unsigned char buf[t->len];
++		memcpy(buf, (const void *)addr, t->len);
++		if (memcmp(t->tx_buf, buf, t->len) != 0)
++			m->status = -EMSGSIZE;
++	}
++	m->actual_length += t->len;
++
++	if (rbspi->spi_ctrl_flash != rbspi->spi_ctrl_fread) {
++		__raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
++		__raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL);
++		__raw_writel(0, base + AR71XX_SPI_REG_FS);
++	}
++
++	return 0;
++}
++
++static int rb4xx_spi_msg(struct rb4xx_spi *rbspi, struct spi_message *m)
++{
++	struct spi_transfer *t = NULL;
++	void __iomem *base = rbspi->base;
++
++	m->status = 0;
++	if (list_empty(&m->transfers))
++		return -1;
++
++	if (m->fast_read)
++		if (rb4xx_spi_read_fast(rbspi, m) == 0)
++			return -1;
++
++	__raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
++	__raw_writel(SPI_CTRL_FASTEST, base + AR71XX_SPI_REG_CTRL);
++	do_spi_init(m->spi);
++
++	list_for_each_entry(t, &m->transfers, transfer_list) {
++		int len;
++
++		len = rb4xx_spi_txrx(base, t);
++		if (len != t->len) {
++			m->status = -EMSGSIZE;
++			break;
++		}
++		m->actual_length += len;
++
++		if (t->cs_change) {
++			if (list_is_last(&t->transfer_list, &m->transfers)) {
++				/* wait for continuation */
++				return m->spi->chip_select;
++			}
++			do_spi_finish(base);
++			ndelay(100);
++		}
++	}
++
++	do_spi_finish(base);
++	__raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL);
++	__raw_writel(0, base + AR71XX_SPI_REG_FS);
++	return -1;
++}
++
++static void rb4xx_spi_process_queue_locked(struct rb4xx_spi *rbspi,
++					   unsigned long *flags)
++{
++	int cs = rbspi->cs_wait;
++
++	rbspi->busy = 1;
++	while (!list_empty(&rbspi->queue)) {
++		struct spi_message *m;
++
++		list_for_each_entry(m, &rbspi->queue, queue)
++			if (cs < 0 || cs == m->spi->chip_select)
++				break;
++
++		if (&m->queue == &rbspi->queue)
++			break;
++
++		list_del_init(&m->queue);
++		spin_unlock_irqrestore(&rbspi->lock, *flags);
++
++		cs = rb4xx_spi_msg(rbspi, m);
++		m->complete(m->context);
++
++		spin_lock_irqsave(&rbspi->lock, *flags);
++	}
++
++	rbspi->cs_wait = cs;
++	rbspi->busy = 0;
++
++	if (cs >= 0) {
++		/* TODO: add timer to unlock cs after 1s inactivity */
++	}
++}
++
++static int rb4xx_spi_transfer(struct spi_device *spi,
++			      struct spi_message *m)
++{
++	struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
++	unsigned long flags;
++
++	m->actual_length = 0;
++	m->status = -EINPROGRESS;
++
++	spin_lock_irqsave(&rbspi->lock, flags);
++	list_add_tail(&m->queue, &rbspi->queue);
++	if (rbspi->busy ||
++	    (rbspi->cs_wait >= 0 && rbspi->cs_wait != m->spi->chip_select)) {
++		/* job will be done later */
++		spin_unlock_irqrestore(&rbspi->lock, flags);
++		return 0;
++	}
++
++	/* process job in current context */
++	rb4xx_spi_process_queue_locked(rbspi, &flags);
++	spin_unlock_irqrestore(&rbspi->lock, flags);
++
++	return 0;
++}
++
++static int rb4xx_spi_setup(struct spi_device *spi)
++{
++	struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
++	unsigned long flags;
++
++	if (spi->mode & ~(SPI_CS_HIGH)) {
++		dev_err(&spi->dev, "mode %x not supported\n",
++			(unsigned) spi->mode);
++		return -EINVAL;
++	}
++
++	if (spi->bits_per_word != 8 && spi->bits_per_word != 0) {
++		dev_err(&spi->dev, "bits_per_word %u not supported\n",
++			(unsigned) spi->bits_per_word);
++		return -EINVAL;
++	}
++
++	spin_lock_irqsave(&rbspi->lock, flags);
++	if (rbspi->cs_wait == spi->chip_select && !rbspi->busy) {
++		rbspi->cs_wait = -1;
++		rb4xx_spi_process_queue_locked(rbspi, &flags);
++	}
++	spin_unlock_irqrestore(&rbspi->lock, flags);
++
++	return 0;
++}
++
++static unsigned get_spi_ctrl(struct rb4xx_spi *rbspi, unsigned hz_max,
++			     const char *name)
++{
++	unsigned div;
++
++	div = (rbspi->ahb_freq - 1) / (2 * hz_max);
++
++	/*
++	 * CPU has a bug at (div == 0) - first bit read is random
++	 */
++	if (div == 0)
++		++div;
++
++	if (name) {
++		unsigned ahb_khz = (rbspi->ahb_freq + 500) / 1000;
++		unsigned div_real = 2 * (div + 1);
++		pr_debug("rb4xx: %s SPI clock %u kHz (AHB %u kHz / %u)\n",
++		       name,
++		       ahb_khz / div_real,
++		       ahb_khz, div_real);
++	}
++
++	return SPI_CTRL_FASTEST + div;
++}
++
++static int rb4xx_spi_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct rb4xx_spi *rbspi;
++	struct resource *r;
++	int err = 0;
++
++	master = spi_alloc_master(&pdev->dev, sizeof(*rbspi));
++	if (master == NULL) {
++		dev_err(&pdev->dev, "no memory for spi_master\n");
++		err = -ENOMEM;
++		goto err_out;
++	}
++
++	master->bus_num = 0;
++	master->num_chipselect = 3;
++	master->setup = rb4xx_spi_setup;
++	master->transfer = rb4xx_spi_transfer;
++
++	rbspi = spi_master_get_devdata(master);
++
++	rbspi->ahb_clk = clk_get(&pdev->dev, "ahb");
++	if (IS_ERR(rbspi->ahb_clk)) {
++		err = PTR_ERR(rbspi->ahb_clk);
++		goto err_put_master;
++	}
++
++	err = clk_enable(rbspi->ahb_clk);
++	if (err)
++		goto err_clk_put;
++
++	rbspi->ahb_freq = clk_get_rate(rbspi->ahb_clk);
++	if (!rbspi->ahb_freq) {
++		err = -EINVAL;
++		goto err_clk_disable;
++	}
++
++	platform_set_drvdata(pdev, rbspi);
++
++	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (r == NULL) {
++		err = -ENOENT;
++		goto err_clk_disable;
++	}
++
++	rbspi->base = ioremap(r->start, r->end - r->start + 1);
++	if (!rbspi->base) {
++		err = -ENXIO;
++		goto err_clk_disable;
++	}
++
++	rbspi->master = master;
++	rbspi->spi_ctrl_flash = get_spi_ctrl(rbspi, SPI_FLASH_HZ, "FLASH");
++	rbspi->spi_ctrl_fread = get_spi_ctrl(rbspi, SPI_CPLD_HZ, "CPLD");
++	rbspi->cs_wait = -1;
++
++	spin_lock_init(&rbspi->lock);
++	INIT_LIST_HEAD(&rbspi->queue);
++
++	err = spi_register_master(master);
++	if (err) {
++		dev_err(&pdev->dev, "failed to register SPI master\n");
++		goto err_iounmap;
++	}
++
++	return 0;
++
++err_iounmap:
++	iounmap(rbspi->base);
++err_clk_disable:
++	clk_disable(rbspi->ahb_clk);
++err_clk_put:
++	clk_put(rbspi->ahb_clk);
++err_put_master:
++	platform_set_drvdata(pdev, NULL);
++	spi_master_put(master);
++err_out:
++	return err;
++}
++
++static int rb4xx_spi_remove(struct platform_device *pdev)
++{
++	struct rb4xx_spi *rbspi = platform_get_drvdata(pdev);
++
++	iounmap(rbspi->base);
++	clk_disable(rbspi->ahb_clk);
++	clk_put(rbspi->ahb_clk);
++	platform_set_drvdata(pdev, NULL);
++	spi_master_put(rbspi->master);
++
++	return 0;
++}
++
++static struct platform_driver rb4xx_spi_drv = {
++	.probe		= rb4xx_spi_probe,
++	.remove		= rb4xx_spi_remove,
++	.driver		= {
++		.name	= DRV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++static int __init rb4xx_spi_init(void)
++{
++	return platform_driver_register(&rb4xx_spi_drv);
++}
++subsys_initcall(rb4xx_spi_init);
++
++static void __exit rb4xx_spi_exit(void)
++{
++	platform_driver_unregister(&rb4xx_spi_drv);
++}
++
++module_exit(rb4xx_spi_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-4.1.13.orig/drivers/spi/spi-rb4xx-cpld.c linux-4.1.13/drivers/spi/spi-rb4xx-cpld.c
+--- linux-4.1.13.orig/drivers/spi/spi-rb4xx-cpld.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/spi/spi-rb4xx-cpld.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,441 @@
++/*
++ * SPI driver for the CPLD chip on the Mikrotik RB4xx boards
++ *
++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was based on the patches for Linux 2.6.27.39 published by
++ * MikroTik for their RouterBoard 4xx series devices.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/bitops.h>
++#include <linux/spi/spi.h>
++#include <linux/gpio.h>
++#include <linux/slab.h>
++
++#include <asm/mach-ath79/rb4xx_cpld.h>
++
++#define DRV_NAME	"spi-rb4xx-cpld"
++#define DRV_DESC	"RB4xx CPLD driver"
++#define DRV_VERSION	"0.1.0"
++
++#define CPLD_CMD_WRITE_NAND	0x08 /* send cmd, n x send data, send indle */
++#define CPLD_CMD_WRITE_CFG	0x09 /* send cmd, n x send cfg */
++#define CPLD_CMD_READ_NAND	0x0a /* send cmd, send idle, n x read data */
++#define CPLD_CMD_READ_FAST	0x0b /* send cmd, 4 x idle, n x read data */
++#define CPLD_CMD_LED5_ON	0x0c /* send cmd */
++#define CPLD_CMD_LED5_OFF	0x0d /* send cmd */
++
++struct rb4xx_cpld {
++	struct spi_device	*spi;
++	struct mutex		lock;
++	struct gpio_chip	chip;
++	unsigned int		config;
++};
++
++static struct rb4xx_cpld *rb4xx_cpld;
++
++static inline struct rb4xx_cpld *gpio_to_cpld(struct gpio_chip *chip)
++{
++	return container_of(chip, struct rb4xx_cpld, chip);
++}
++
++static int rb4xx_cpld_write_cmd(struct rb4xx_cpld *cpld, unsigned char cmd)
++{
++	struct spi_transfer t[1];
++	struct spi_message m;
++	unsigned char tx_buf[1];
++	int err;
++
++	spi_message_init(&m);
++	memset(&t, 0, sizeof(t));
++
++	t[0].tx_buf = tx_buf;
++	t[0].len = sizeof(tx_buf);
++	spi_message_add_tail(&t[0], &m);
++
++	tx_buf[0] = cmd;
++
++	err = spi_sync(cpld->spi, &m);
++	return err;
++}
++
++static int rb4xx_cpld_write_cfg(struct rb4xx_cpld *cpld, unsigned char config)
++{
++	struct spi_transfer t[1];
++	struct spi_message m;
++	unsigned char cmd[2];
++	int err;
++
++	spi_message_init(&m);
++	memset(&t, 0, sizeof(t));
++
++	t[0].tx_buf = cmd;
++	t[0].len = sizeof(cmd);
++	spi_message_add_tail(&t[0], &m);
++
++	cmd[0] = CPLD_CMD_WRITE_CFG;
++	cmd[1] = config;
++
++	err = spi_sync(cpld->spi, &m);
++	return err;
++}
++
++static int __rb4xx_cpld_change_cfg(struct rb4xx_cpld *cpld, unsigned mask,
++				   unsigned value)
++{
++	unsigned int config;
++	int err;
++
++	config = cpld->config & ~mask;
++	config |= value;
++
++	if ((cpld->config ^ config) & 0xff) {
++		err = rb4xx_cpld_write_cfg(cpld, config);
++		if (err)
++			return err;
++	}
++
++	if ((cpld->config ^ config) & CPLD_CFG_nLED5) {
++		err = rb4xx_cpld_write_cmd(cpld, (value) ? CPLD_CMD_LED5_ON :
++							   CPLD_CMD_LED5_OFF);
++		if (err)
++			return err;
++	}
++
++	cpld->config = config;
++	return 0;
++}
++
++int rb4xx_cpld_change_cfg(unsigned mask, unsigned value)
++{
++	int ret;
++
++	if (rb4xx_cpld == NULL)
++		return -ENODEV;
++
++	mutex_lock(&rb4xx_cpld->lock);
++	ret = __rb4xx_cpld_change_cfg(rb4xx_cpld, mask, value);
++	mutex_unlock(&rb4xx_cpld->lock);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(rb4xx_cpld_change_cfg);
++
++int rb4xx_cpld_read_from(unsigned addr, unsigned char *rx_buf,
++			 const unsigned char *verify_buf, unsigned count)
++{
++	const unsigned char cmd[5] = {
++		CPLD_CMD_READ_FAST,
++		(addr >> 16) & 0xff,
++		(addr >> 8) & 0xff,
++		 addr & 0xff,
++		 0
++	};
++	struct spi_transfer t[2] = {
++		{
++			.tx_buf = &cmd,
++			.len = 5,
++		},
++		{
++			.tx_buf = verify_buf,
++			.rx_buf = rx_buf,
++			.len = count,
++			.verify = (verify_buf != NULL),
++		},
++	};
++	struct spi_message m;
++
++	if (rb4xx_cpld == NULL)
++		return -ENODEV;
++
++	spi_message_init(&m);
++	m.fast_read = 1;
++	spi_message_add_tail(&t[0], &m);
++	spi_message_add_tail(&t[1], &m);
++	return spi_sync(rb4xx_cpld->spi, &m);
++}
++EXPORT_SYMBOL_GPL(rb4xx_cpld_read_from);
++
++#if 0
++int rb4xx_cpld_read(unsigned char *buf, unsigned char *verify_buf,
++		    unsigned count)
++{
++	struct spi_transfer t[2];
++	struct spi_message m;
++	unsigned char cmd[2];
++
++	if (rb4xx_cpld == NULL)
++		return -ENODEV;
++
++	spi_message_init(&m);
++	memset(&t, 0, sizeof(t));
++
++	/* send command */
++	t[0].tx_buf = cmd;
++	t[0].len = sizeof(cmd);
++	spi_message_add_tail(&t[0], &m);
++
++	cmd[0] = CPLD_CMD_READ_NAND;
++	cmd[1] = 0;
++
++	/* read data */
++	t[1].rx_buf = buf;
++	t[1].len = count;
++	spi_message_add_tail(&t[1], &m);
++
++	return spi_sync(rb4xx_cpld->spi, &m);
++}
++#else
++int rb4xx_cpld_read(unsigned char *rx_buf, const unsigned char *verify_buf,
++		    unsigned count)
++{
++	static const unsigned char cmd[2] = { CPLD_CMD_READ_NAND, 0 };
++	struct spi_transfer t[2] = {
++		{
++			.tx_buf = &cmd,
++			.len = 2,
++		}, {
++			.tx_buf = verify_buf,
++			.rx_buf = rx_buf,
++			.len = count,
++			.verify = (verify_buf != NULL),
++		},
++	};
++	struct spi_message m;
++
++	if (rb4xx_cpld == NULL)
++		return -ENODEV;
++
++	spi_message_init(&m);
++	spi_message_add_tail(&t[0], &m);
++	spi_message_add_tail(&t[1], &m);
++	return spi_sync(rb4xx_cpld->spi, &m);
++}
++#endif
++EXPORT_SYMBOL_GPL(rb4xx_cpld_read);
++
++int rb4xx_cpld_write(const unsigned char *buf, unsigned count)
++{
++#if 0
++	struct spi_transfer t[3];
++	struct spi_message m;
++	unsigned char cmd[1];
++
++	if (rb4xx_cpld == NULL)
++		return -ENODEV;
++
++	memset(&t, 0, sizeof(t));
++	spi_message_init(&m);
++
++	/* send command */
++	t[0].tx_buf = cmd;
++	t[0].len = sizeof(cmd);
++	spi_message_add_tail(&t[0], &m);
++
++	cmd[0] = CPLD_CMD_WRITE_NAND;
++
++	/* write data */
++	t[1].tx_buf = buf;
++	t[1].len = count;
++	spi_message_add_tail(&t[1], &m);
++
++	/* send idle */
++	t[2].len = 1;
++	spi_message_add_tail(&t[2], &m);
++
++	return spi_sync(rb4xx_cpld->spi, &m);
++#else
++	static const unsigned char cmd = CPLD_CMD_WRITE_NAND;
++	struct spi_transfer t[3] = {
++		{
++			.tx_buf = &cmd,
++			.len = 1,
++		}, {
++			.tx_buf = buf,
++			.len = count,
++			.fast_write = 1,
++		}, {
++			.len = 1,
++			.fast_write = 1,
++		},
++	};
++	struct spi_message m;
++
++	if (rb4xx_cpld == NULL)
++		return -ENODEV;
++
++	spi_message_init(&m);
++	spi_message_add_tail(&t[0], &m);
++	spi_message_add_tail(&t[1], &m);
++	spi_message_add_tail(&t[2], &m);
++	return spi_sync(rb4xx_cpld->spi, &m);
++#endif
++}
++EXPORT_SYMBOL_GPL(rb4xx_cpld_write);
++
++static int rb4xx_cpld_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++	struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
++	int ret;
++
++	mutex_lock(&cpld->lock);
++	ret = (cpld->config >> offset) & 1;
++	mutex_unlock(&cpld->lock);
++
++	return ret;
++}
++
++static void rb4xx_cpld_gpio_set(struct gpio_chip *chip, unsigned offset,
++				int value)
++{
++	struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
++
++	mutex_lock(&cpld->lock);
++	__rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
++	mutex_unlock(&cpld->lock);
++}
++
++static int rb4xx_cpld_gpio_direction_input(struct gpio_chip *chip,
++					   unsigned offset)
++{
++	return -EOPNOTSUPP;
++}
++
++static int rb4xx_cpld_gpio_direction_output(struct gpio_chip *chip,
++					    unsigned offset,
++					    int value)
++{
++	struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
++	int ret;
++
++	mutex_lock(&cpld->lock);
++	ret = __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
++	mutex_unlock(&cpld->lock);
++
++	return ret;
++}
++
++static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base)
++{
++	int err;
++
++	/* init config */
++	cpld->config = CPLD_CFG_nLED1 | CPLD_CFG_nLED2 | CPLD_CFG_nLED3 |
++		       CPLD_CFG_nLED4 | CPLD_CFG_nCE;
++	rb4xx_cpld_write_cfg(cpld, cpld->config);
++
++	/* setup GPIO chip */
++	cpld->chip.label = DRV_NAME;
++
++	cpld->chip.get = rb4xx_cpld_gpio_get;
++	cpld->chip.set = rb4xx_cpld_gpio_set;
++	cpld->chip.direction_input = rb4xx_cpld_gpio_direction_input;
++	cpld->chip.direction_output = rb4xx_cpld_gpio_direction_output;
++
++	cpld->chip.base = base;
++	cpld->chip.ngpio = CPLD_NUM_GPIOS;
++	cpld->chip.can_sleep = 1;
++	cpld->chip.dev = &cpld->spi->dev;
++	cpld->chip.owner = THIS_MODULE;
++
++	err = gpiochip_add(&cpld->chip);
++	if (err)
++		dev_err(&cpld->spi->dev, "adding GPIO chip failed, err=%d\n",
++			err);
++
++	return err;
++}
++
++static int rb4xx_cpld_probe(struct spi_device *spi)
++{
++	struct rb4xx_cpld *cpld;
++	struct rb4xx_cpld_platform_data *pdata;
++	int err;
++
++	pdata = spi->dev.platform_data;
++	if (!pdata) {
++		dev_dbg(&spi->dev, "no platform data\n");
++		return -EINVAL;
++	}
++
++	cpld = kzalloc(sizeof(*cpld), GFP_KERNEL);
++	if (!cpld) {
++		dev_err(&spi->dev, "no memory for private data\n");
++		return -ENOMEM;
++	}
++
++	mutex_init(&cpld->lock);
++	cpld->spi = spi_dev_get(spi);
++	dev_set_drvdata(&spi->dev, cpld);
++
++	spi->mode = SPI_MODE_0;
++	spi->bits_per_word = 8;
++	err = spi_setup(spi);
++	if (err) {
++		dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
++		goto err_drvdata;
++	}
++
++	err = rb4xx_cpld_gpio_init(cpld, pdata->gpio_base);
++	if (err)
++		goto err_drvdata;
++
++	rb4xx_cpld = cpld;
++
++	return 0;
++
++err_drvdata:
++	dev_set_drvdata(&spi->dev, NULL);
++	kfree(cpld);
++
++	return err;
++}
++
++static int rb4xx_cpld_remove(struct spi_device *spi)
++{
++	struct rb4xx_cpld *cpld;
++
++	rb4xx_cpld = NULL;
++	cpld = dev_get_drvdata(&spi->dev);
++	dev_set_drvdata(&spi->dev, NULL);
++	kfree(cpld);
++
++	return 0;
++}
++
++static struct spi_driver rb4xx_cpld_driver = {
++	.driver = {
++		.name		= DRV_NAME,
++		.bus		= &spi_bus_type,
++		.owner		= THIS_MODULE,
++	},
++	.probe		= rb4xx_cpld_probe,
++	.remove		= rb4xx_cpld_remove,
++};
++
++static int __init rb4xx_cpld_init(void)
++{
++	return spi_register_driver(&rb4xx_cpld_driver);
++}
++module_init(rb4xx_cpld_init);
++
++static void __exit rb4xx_cpld_exit(void)
++{
++	spi_unregister_driver(&rb4xx_cpld_driver);
++}
++module_exit(rb4xx_cpld_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-4.1.13.orig/drivers/spi/spi-vsc7385.c linux-4.1.13/drivers/spi/spi-vsc7385.c
+--- linux-4.1.13.orig/drivers/spi/spi-vsc7385.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/drivers/spi/spi-vsc7385.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,621 @@
++/*
++ * SPI driver for the Vitesse VSC7385 ethernet switch
++ *
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/bitops.h>
++#include <linux/firmware.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/vsc7385.h>
++
++#define DRV_NAME	"spi-vsc7385"
++#define DRV_DESC	"Vitesse VSC7385 Gbit ethernet switch driver"
++#define DRV_VERSION	"0.1.0"
++
++#define VSC73XX_BLOCK_MAC	0x1
++#define VSC73XX_BLOCK_2		0x2
++#define VSC73XX_BLOCK_MII	0x3
++#define VSC73XX_BLOCK_4		0x4
++#define VSC73XX_BLOCK_5		0x5
++#define VSC73XX_BLOCK_SYSTEM	0x7
++
++#define VSC73XX_SUBBLOCK_PORT_0		0
++#define VSC73XX_SUBBLOCK_PORT_1		1
++#define VSC73XX_SUBBLOCK_PORT_2		2
++#define VSC73XX_SUBBLOCK_PORT_3		3
++#define VSC73XX_SUBBLOCK_PORT_4		4
++#define VSC73XX_SUBBLOCK_PORT_MAC	6
++
++/* MAC Block registers */
++#define VSC73XX_MAC_CFG		0x0
++#define VSC73XX_ADVPORTM	0x19
++#define VSC73XX_RXOCT		0x50
++#define VSC73XX_TXOCT		0x51
++#define VSC73XX_C_RX0		0x52
++#define VSC73XX_C_RX1		0x53
++#define VSC73XX_C_RX2		0x54
++#define VSC73XX_C_TX0		0x55
++#define VSC73XX_C_TX1		0x56
++#define VSC73XX_C_TX2		0x57
++#define VSC73XX_C_CFG		0x58
++
++/* MAC_CFG register bits */
++#define VSC73XX_MAC_CFG_WEXC_DIS	(1 << 31)
++#define VSC73XX_MAC_CFG_PORT_RST	(1 << 29)
++#define VSC73XX_MAC_CFG_TX_EN		(1 << 28)
++#define VSC73XX_MAC_CFG_SEED_LOAD	(1 << 27)
++#define VSC73XX_MAC_CFG_FDX		(1 << 18)
++#define VSC73XX_MAC_CFG_GIGE		(1 << 17)
++#define VSC73XX_MAC_CFG_RX_EN		(1 << 16)
++#define VSC73XX_MAC_CFG_VLAN_DBLAWR	(1 << 15)
++#define VSC73XX_MAC_CFG_VLAN_AWR	(1 << 14)
++#define VSC73XX_MAC_CFG_100_BASE_T	(1 << 13)
++#define VSC73XX_MAC_CFG_TX_IPG(x)	(((x) & 0x1f) << 6)
++#define VSC73XX_MAC_CFG_MAC_RX_RST	(1 << 5)
++#define VSC73XX_MAC_CFG_MAC_TX_RST	(1 << 4)
++#define VSC73XX_MAC_CFG_BIT2		(1 << 2)
++#define VSC73XX_MAC_CFG_CLK_SEL(x)	((x) & 0x3)
++
++/* ADVPORTM register bits */
++#define VSC73XX_ADVPORTM_IFG_PPM	(1 << 7)
++#define VSC73XX_ADVPORTM_EXC_COL_CONT	(1 << 6)
++#define VSC73XX_ADVPORTM_EXT_PORT	(1 << 5)
++#define VSC73XX_ADVPORTM_INV_GTX	(1 << 4)
++#define VSC73XX_ADVPORTM_ENA_GTX	(1 << 3)
++#define VSC73XX_ADVPORTM_DDR_MODE	(1 << 2)
++#define VSC73XX_ADVPORTM_IO_LOOPBACK	(1 << 1)
++#define VSC73XX_ADVPORTM_HOST_LOOPBACK	(1 << 0)
++
++/* MII Block registers */
++#define VSC73XX_MII_STAT	0x0
++#define VSC73XX_MII_CMD		0x1
++#define VSC73XX_MII_DATA	0x2
++
++/* System Block registers */
++#define VSC73XX_ICPU_SIPAD		0x01
++#define VSC73XX_ICPU_CLOCK_DELAY	0x05
++#define VSC73XX_ICPU_CTRL		0x10
++#define VSC73XX_ICPU_ADDR		0x11
++#define VSC73XX_ICPU_SRAM		0x12
++#define VSC73XX_ICPU_MBOX_VAL		0x15
++#define VSC73XX_ICPU_MBOX_SET		0x16
++#define VSC73XX_ICPU_MBOX_CLR		0x17
++#define VSC73XX_ICPU_CHIPID		0x18
++#define VSC73XX_ICPU_GPIO		0x34
++
++#define VSC73XX_ICPU_CTRL_CLK_DIV	(1 << 8)
++#define VSC73XX_ICPU_CTRL_SRST_HOLD	(1 << 7)
++#define VSC73XX_ICPU_CTRL_BOOT_EN	(1 << 3)
++#define VSC73XX_ICPU_CTRL_EXT_ACC_EN	(1 << 2)
++#define VSC73XX_ICPU_CTRL_CLK_EN	(1 << 1)
++#define VSC73XX_ICPU_CTRL_SRST		(1 << 0)
++
++#define VSC73XX_ICPU_CHIPID_ID_SHIFT	12
++#define VSC73XX_ICPU_CHIPID_ID_MASK	0xffff
++#define VSC73XX_ICPU_CHIPID_REV_SHIFT	28
++#define VSC73XX_ICPU_CHIPID_REV_MASK	0xf
++#define VSC73XX_ICPU_CHIPID_ID_7385	0x7385
++#define VSC73XX_ICPU_CHIPID_ID_7395	0x7395
++
++#define VSC73XX_CMD_MODE_READ		0
++#define VSC73XX_CMD_MODE_WRITE		1
++#define VSC73XX_CMD_MODE_SHIFT		4
++#define VSC73XX_CMD_BLOCK_SHIFT		5
++#define VSC73XX_CMD_BLOCK_MASK		0x7
++#define VSC73XX_CMD_SUBBLOCK_MASK	0xf
++
++#define VSC7385_CLOCK_DELAY		((3 << 4) | 3)
++#define VSC7385_CLOCK_DELAY_MASK	((3 << 4) | 3)
++
++#define VSC73XX_ICPU_CTRL_STOP	(VSC73XX_ICPU_CTRL_SRST_HOLD | \
++				 VSC73XX_ICPU_CTRL_BOOT_EN | \
++				 VSC73XX_ICPU_CTRL_EXT_ACC_EN)
++
++#define VSC73XX_ICPU_CTRL_START	(VSC73XX_ICPU_CTRL_CLK_DIV | \
++				 VSC73XX_ICPU_CTRL_BOOT_EN | \
++				 VSC73XX_ICPU_CTRL_CLK_EN | \
++				 VSC73XX_ICPU_CTRL_SRST)
++
++#define VSC7385_ADVPORTM_MASK	(VSC73XX_ADVPORTM_IFG_PPM | \
++				 VSC73XX_ADVPORTM_EXC_COL_CONT | \
++				 VSC73XX_ADVPORTM_EXT_PORT | \
++				 VSC73XX_ADVPORTM_INV_GTX | \
++				 VSC73XX_ADVPORTM_ENA_GTX | \
++				 VSC73XX_ADVPORTM_DDR_MODE | \
++				 VSC73XX_ADVPORTM_IO_LOOPBACK | \
++				 VSC73XX_ADVPORTM_HOST_LOOPBACK)
++
++#define VSC7385_ADVPORTM_INIT	(VSC73XX_ADVPORTM_EXT_PORT | \
++				 VSC73XX_ADVPORTM_ENA_GTX | \
++				 VSC73XX_ADVPORTM_DDR_MODE)
++
++#define VSC7385_MAC_CFG_RESET	(VSC73XX_MAC_CFG_PORT_RST | \
++				 VSC73XX_MAC_CFG_MAC_RX_RST | \
++				 VSC73XX_MAC_CFG_MAC_TX_RST)
++
++#define VSC73XX_MAC_CFG_INIT	(VSC73XX_MAC_CFG_TX_EN | \
++				 VSC73XX_MAC_CFG_FDX | \
++				 VSC73XX_MAC_CFG_GIGE | \
++				 VSC73XX_MAC_CFG_RX_EN)
++
++#define VSC73XX_RESET_DELAY	100
++
++struct vsc7385 {
++	struct spi_device		*spi;
++	struct mutex			lock;
++	struct vsc7385_platform_data	*pdata;
++};
++
++static int vsc7385_is_addr_valid(u8 block, u8 subblock)
++{
++	switch (block) {
++	case VSC73XX_BLOCK_MAC:
++		switch (subblock) {
++		case 0 ... 4:
++		case 6:
++			return 1;
++		}
++		break;
++
++	case VSC73XX_BLOCK_2:
++	case VSC73XX_BLOCK_SYSTEM:
++		switch (subblock) {
++		case 0:
++			return 1;
++		}
++		break;
++
++	case VSC73XX_BLOCK_MII:
++	case VSC73XX_BLOCK_4:
++	case VSC73XX_BLOCK_5:
++		switch (subblock) {
++		case 0 ... 1:
++			return 1;
++		}
++		break;
++	}
++
++	return 0;
++}
++
++static inline u8 vsc7385_make_addr(u8 mode, u8 block, u8 subblock)
++{
++	u8 ret;
++
++	ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT;
++	ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT;
++	ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK;
++
++	return ret;
++}
++
++static int vsc7385_read(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg,
++			u32 *value)
++{
++	u8 cmd[4];
++	u8 buf[4];
++	struct spi_transfer t[2];
++	struct spi_message m;
++	int err;
++
++	if (!vsc7385_is_addr_valid(block, subblock))
++		return -EINVAL;
++
++	spi_message_init(&m);
++
++	memset(&t, 0, sizeof(t));
++
++	t[0].tx_buf = cmd;
++	t[0].len = sizeof(cmd);
++	spi_message_add_tail(&t[0], &m);
++
++	t[1].rx_buf = buf;
++	t[1].len = sizeof(buf);
++	spi_message_add_tail(&t[1], &m);
++
++	cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_READ, block, subblock);
++	cmd[1] = reg;
++	cmd[2] = 0;
++	cmd[3] = 0;
++
++	mutex_lock(&vsc->lock);
++	err = spi_sync(vsc->spi, &m);
++	mutex_unlock(&vsc->lock);
++
++	if (err)
++		return err;
++
++	*value = (((u32) buf[0]) << 24) | (((u32) buf[1]) << 16) |
++		 (((u32) buf[2]) << 8) | ((u32) buf[3]);
++
++	return 0;
++}
++
++
++static int vsc7385_write(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg,
++			 u32 value)
++{
++	u8 cmd[2];
++	u8 buf[4];
++	struct spi_transfer t[2];
++	struct spi_message m;
++	int err;
++
++	if (!vsc7385_is_addr_valid(block, subblock))
++		return -EINVAL;
++
++	spi_message_init(&m);
++
++	memset(&t, 0, sizeof(t));
++
++	t[0].tx_buf = cmd;
++	t[0].len = sizeof(cmd);
++	spi_message_add_tail(&t[0], &m);
++
++	t[1].tx_buf = buf;
++	t[1].len = sizeof(buf);
++	spi_message_add_tail(&t[1], &m);
++
++	cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock);
++	cmd[1] = reg;
++
++	buf[0] = (value >> 24) & 0xff;
++	buf[1] = (value >> 16) & 0xff;
++	buf[2] = (value >> 8) & 0xff;
++	buf[3] = value & 0xff;
++
++	mutex_lock(&vsc->lock);
++	err = spi_sync(vsc->spi, &m);
++	mutex_unlock(&vsc->lock);
++
++	return err;
++}
++
++static inline int vsc7385_write_verify(struct vsc7385 *vsc, u8 block,
++				       u8 subblock, u8 reg, u32 value,
++				       u32 read_mask, u32 read_val)
++{
++	struct spi_device *spi = vsc->spi;
++	u32 t;
++	int err;
++
++	err = vsc7385_write(vsc, block, subblock, reg, value);
++	if (err)
++		return err;
++
++	err = vsc7385_read(vsc, block, subblock, reg, &t);
++	if (err)
++		return err;
++
++	if ((t & read_mask) != read_val) {
++		dev_err(&spi->dev, "register write error\n");
++		return -EIO;
++	}
++
++	return 0;
++}
++
++static inline int vsc7385_set_clock_delay(struct vsc7385 *vsc, u32 val)
++{
++	return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0,
++			     VSC73XX_ICPU_CLOCK_DELAY, val);
++}
++
++static inline int vsc7385_get_clock_delay(struct vsc7385 *vsc, u32 *val)
++{
++	return vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
++			    VSC73XX_ICPU_CLOCK_DELAY, val);
++}
++
++static inline int vsc7385_icpu_stop(struct vsc7385 *vsc)
++{
++	return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL,
++			     VSC73XX_ICPU_CTRL_STOP);
++}
++
++static inline int vsc7385_icpu_start(struct vsc7385 *vsc)
++{
++	return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL,
++			     VSC73XX_ICPU_CTRL_START);
++}
++
++static inline int vsc7385_icpu_reset(struct vsc7385 *vsc)
++{
++	int rc;
++
++	rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_ADDR,
++			   0x0000);
++	if (rc)
++		dev_err(&vsc->spi->dev,
++			"could not reset microcode, err=%d\n", rc);
++
++	return rc;
++}
++
++static int vsc7385_upload_ucode(struct vsc7385 *vsc)
++{
++	struct spi_device *spi = vsc->spi;
++	const struct firmware *firmware;
++	char *ucode_name;
++	unsigned char *dp;
++	unsigned int curVal;
++	int i;
++	int diffs;
++	int rc;
++
++	ucode_name = (vsc->pdata->ucode_name) ? vsc->pdata->ucode_name
++					      : "vsc7385_ucode.bin";
++	rc = request_firmware(&firmware, ucode_name, &spi->dev);
++	if (rc) {
++		dev_err(&spi->dev, "request_firmware failed, err=%d\n",
++			rc);
++		return rc;
++	}
++
++	rc = vsc7385_icpu_stop(vsc);
++	if (rc)
++		goto out;
++
++	rc = vsc7385_icpu_reset(vsc);
++	if (rc)
++		goto out;
++
++	dev_info(&spi->dev, "uploading microcode...\n");
++
++	dp = (unsigned char *) firmware->data;
++	for (i = 0; i < firmware->size; i++) {
++		rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0,
++				   VSC73XX_ICPU_SRAM, *dp++);
++		if (rc) {
++			dev_err(&spi->dev, "could not load microcode, err=%d\n",
++				rc);
++			goto out;
++		}
++	}
++
++	rc = vsc7385_icpu_reset(vsc);
++	if (rc)
++		goto out;
++
++	dev_info(&spi->dev, "verifying microcode...\n");
++
++	dp = (unsigned char *) firmware->data;
++	diffs = 0;
++	for (i = 0; i < firmware->size; i++) {
++		rc = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
++				  VSC73XX_ICPU_SRAM, &curVal);
++		if (rc) {
++			dev_err(&spi->dev, "could not read microcode %d\n",
++				rc);
++			goto out;
++		}
++
++		if (curVal > 0xff) {
++			dev_err(&spi->dev, "bad val read: %04x : %02x  %02x\n",
++				i, *dp, curVal);
++			rc = -EIO;
++			goto out;
++		}
++
++		if ((curVal & 0xff) != *dp) {
++			diffs++;
++			dev_err(&spi->dev, "verify error: %04x : %02x  %02x\n",
++				i, *dp, curVal);
++
++			if (diffs > 4)
++				break;
++			}
++		dp++;
++	}
++
++	if (diffs) {
++		dev_err(&spi->dev, "microcode verification failed\n");
++		rc = -EIO;
++		goto out;
++	}
++
++	dev_info(&spi->dev, "microcode uploaded\n");
++
++	rc = vsc7385_icpu_start(vsc);
++
++out:
++	release_firmware(firmware);
++	return rc;
++}
++
++static int vsc7385_setup(struct vsc7385 *vsc)
++{
++	struct vsc7385_platform_data *pdata = vsc->pdata;
++	u32 t;
++	int err;
++
++	err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_SYSTEM, 0,
++				   VSC73XX_ICPU_CLOCK_DELAY,
++				   VSC7385_CLOCK_DELAY,
++				   VSC7385_CLOCK_DELAY_MASK,
++				   VSC7385_CLOCK_DELAY);
++	if (err)
++		goto err;
++
++	err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_MAC,
++				   VSC73XX_SUBBLOCK_PORT_MAC, VSC73XX_ADVPORTM,
++				   VSC7385_ADVPORTM_INIT,
++				   VSC7385_ADVPORTM_MASK,
++				   VSC7385_ADVPORTM_INIT);
++	if (err)
++		goto err;
++
++	err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC,
++			    VSC73XX_MAC_CFG, VSC7385_MAC_CFG_RESET);
++	if (err)
++		goto err;
++
++	t = VSC73XX_MAC_CFG_INIT;
++	t |= VSC73XX_MAC_CFG_TX_IPG(pdata->mac_cfg.tx_ipg);
++	t |= VSC73XX_MAC_CFG_CLK_SEL(pdata->mac_cfg.clk_sel);
++	if (pdata->mac_cfg.bit2)
++		t |= VSC73XX_MAC_CFG_BIT2;
++
++	err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC,
++			    VSC73XX_MAC_CFG, t);
++	if (err)
++		goto err;
++
++	return 0;
++
++err:
++	return err;
++}
++
++static int vsc7385_detect(struct vsc7385 *vsc)
++{
++	struct spi_device *spi = vsc->spi;
++	u32 t;
++	u32 id;
++	u32 rev;
++	int err;
++
++	err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
++				VSC73XX_ICPU_MBOX_VAL, &t);
++	if (err) {
++		dev_err(&spi->dev, "unable to read mailbox, err=%d\n", err);
++		return err;
++	}
++
++	if (t == 0xffffffff) {
++		dev_dbg(&spi->dev, "assert chip reset\n");
++		if (vsc->pdata->reset)
++			vsc->pdata->reset();
++
++	}
++
++	err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
++				VSC73XX_ICPU_CHIPID, &t);
++	if (err) {
++		dev_err(&spi->dev, "unable to read chip id, err=%d\n", err);
++		return err;
++	}
++
++	id = (t >> VSC73XX_ICPU_CHIPID_ID_SHIFT) & VSC73XX_ICPU_CHIPID_ID_MASK;
++	switch (id) {
++	case VSC73XX_ICPU_CHIPID_ID_7385:
++	case VSC73XX_ICPU_CHIPID_ID_7395:
++		break;
++	default:
++		dev_err(&spi->dev, "unsupported chip, id=%04x\n", id);
++		return -ENODEV;
++	}
++
++	rev = (t >> VSC73XX_ICPU_CHIPID_REV_SHIFT) &
++	      VSC73XX_ICPU_CHIPID_REV_MASK;
++	dev_info(&spi->dev, "VSC%04X (rev. %d) switch found\n", id, rev);
++
++	return 0;
++}
++
++static int vsc7385_probe(struct spi_device *spi)
++{
++	struct vsc7385 *vsc;
++	struct vsc7385_platform_data *pdata;
++	int	err;
++
++	printk(KERN_INFO DRV_DESC " version " DRV_VERSION"\n");
++
++	pdata = spi->dev.platform_data;
++	if (!pdata) {
++		dev_err(&spi->dev, "no platform data specified\n");
++		return -ENODEV;
++	}
++
++	vsc = kzalloc(sizeof(*vsc), GFP_KERNEL);
++	if (!vsc) {
++		dev_err(&spi->dev, "no memory for private data\n");
++		return -ENOMEM;
++	}
++
++	mutex_init(&vsc->lock);
++	vsc->pdata = pdata;
++	vsc->spi = spi_dev_get(spi);
++	dev_set_drvdata(&spi->dev, vsc);
++
++	spi->mode = SPI_MODE_0;
++	spi->bits_per_word = 8;
++	err = spi_setup(spi);
++	if (err) {
++		dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
++		goto err_drvdata;
++	}
++
++	err = vsc7385_detect(vsc);
++	if (err) {
++		dev_err(&spi->dev, "no chip found, err=%d\n", err);
++		goto err_drvdata;
++	}
++
++	err = vsc7385_upload_ucode(vsc);
++	if (err)
++		goto err_drvdata;
++
++	err = vsc7385_setup(vsc);
++	if (err)
++		goto err_drvdata;
++
++	return 0;
++
++err_drvdata:
++	dev_set_drvdata(&spi->dev, NULL);
++	kfree(vsc);
++	return err;
++}
++
++static int vsc7385_remove(struct spi_device *spi)
++{
++	struct vsc7385_data	*vsc;
++
++	vsc = dev_get_drvdata(&spi->dev);
++	dev_set_drvdata(&spi->dev, NULL);
++	kfree(vsc);
++
++	return 0;
++}
++
++static struct spi_driver vsc7385_driver = {
++	.driver = {
++		.name		= DRV_NAME,
++		.bus		= &spi_bus_type,
++		.owner		= THIS_MODULE,
++	},
++	.probe		= vsc7385_probe,
++	.remove		= vsc7385_remove,
++};
++
++static int __init vsc7385_init(void)
++{
++	return spi_register_driver(&vsc7385_driver);
++}
++module_init(vsc7385_init);
++
++static void __exit vsc7385_exit(void)
++{
++	spi_unregister_driver(&vsc7385_driver);
++}
++module_exit(vsc7385_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_LICENSE("GPL v2");
++
+diff -Nur linux-4.1.13.orig/drivers/tty/serial/serial_core.c linux-4.1.13/drivers/tty/serial/serial_core.c
+--- linux-4.1.13.orig/drivers/tty/serial/serial_core.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/tty/serial/serial_core.c	2015-12-04 19:57:05.897979014 +0100
+@@ -164,6 +164,8 @@
+ 	if (retval == 0) {
+ 		if (uart_console(uport) && uport->cons->cflag) {
+ 			tty->termios.c_cflag = uport->cons->cflag;
++			tty->termios.c_ospeed = uport->cons->baud;
++			tty->termios.c_ispeed = uport->cons->baud;
+ 			uport->cons->cflag = 0;
+ 		}
+ 		/*
+@@ -1901,7 +1903,7 @@
+ 	{   4800, B4800   },
+ 	{   2400, B2400   },
+ 	{   1200, B1200   },
+-	{      0, B38400  }
++	{      0, BOTHER  }
+ };
+ 
+ /**
+@@ -1940,10 +1942,13 @@
+ 	 * Construct a cflag setting.
+ 	 */
+ 	for (i = 0; baud_rates[i].rate; i++)
+-		if (baud_rates[i].rate <= baud)
++		if (baud_rates[i].rate == baud)
+ 			break;
+ 
+ 	termios.c_cflag |= baud_rates[i].cflag;
++	if (!baud_rates[i].rate) {
++		termios.c_ospeed = baud;
++	}
+ 
+ 	if (bits == 7)
+ 		termios.c_cflag |= CS7;
+@@ -1973,8 +1978,10 @@
+ 	 * Allow the setting of the UART parameters with a NULL console
+ 	 * too:
+ 	 */
+-	if (co)
++	if (co) {
+ 		co->cflag = termios.c_cflag;
++		co->baud = baud;
++	}
+ 
+ 	return 0;
+ }
+diff -Nur linux-4.1.13.orig/drivers/usb/host/ehci-hcd.c linux-4.1.13/drivers/usb/host/ehci-hcd.c
+--- linux-4.1.13.orig/drivers/usb/host/ehci-hcd.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/usb/host/ehci-hcd.c	2015-12-04 19:57:03.974104886 +0100
+@@ -252,6 +252,37 @@
+ 	command |= CMD_RESET;
+ 	dbg_cmd (ehci, "reset", command);
+ 	ehci_writel(ehci, command, &ehci->regs->command);
++
++	if (ehci->qca_force_host_mode) {
++		u32 usbmode;
++
++		udelay(1000);
++
++		usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
++		usbmode |= USBMODE_CM_HC | (1 << 4);
++		ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
++
++		ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
++			 ehci_readl(ehci, &ehci->regs->usbmode));
++	}
++
++	if (ehci->qca_force_16bit_ptw) {
++		u32 port_status;
++
++		udelay(1000);
++
++		/* enable 16-bit UTMI interface */
++		port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
++		port_status |= BIT(28);
++		ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
++
++		ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
++			 ehci_readl(ehci, &ehci->regs->port_status[0]));
++	}
++
++	if (ehci->reset_notifier)
++		ehci->reset_notifier(ehci_to_hcd(ehci));
++
+ 	ehci->rh_state = EHCI_RH_HALTED;
+ 	ehci->next_statechange = jiffies;
+ 	retval = ehci_handshake(ehci, &ehci->regs->command,
+diff -Nur linux-4.1.13.orig/drivers/usb/host/ehci-platform.c linux-4.1.13/drivers/usb/host/ehci-platform.c
+--- linux-4.1.13.orig/drivers/usb/host/ehci-platform.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/usb/host/ehci-platform.c	2015-12-04 19:57:03.978104624 +0100
+@@ -49,6 +49,14 @@
+ 
+ static const char hcd_name[] = "ehci-platform";
+ 
++static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
++{
++	struct platform_device *pdev = to_platform_device(hcd->self.controller);
++	struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
++
++	pdata->reset_notifier(pdev);
++}
++
+ static int ehci_platform_reset(struct usb_hcd *hcd)
+ {
+ 	struct platform_device *pdev = to_platform_device(hcd->self.controller);
+diff -Nur linux-4.1.13.orig/drivers/watchdog/ath79_wdt.c linux-4.1.13/drivers/watchdog/ath79_wdt.c
+--- linux-4.1.13.orig/drivers/watchdog/ath79_wdt.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/drivers/watchdog/ath79_wdt.c	2015-12-04 19:57:04.398077147 +0100
+@@ -114,10 +114,14 @@
+ 
+ static int ath79_wdt_set_timeout(int val)
+ {
+-	if (val < 1 || val > max_timeout)
++	if (val < 1)
+ 		return -EINVAL;
+ 
+-	timeout = val;
++	if (val > max_timeout)
++		timeout = max_timeout;
++	else
++		timeout = val;
++
+ 	ath79_wdt_keepalive();
+ 
+ 	return 0;
+diff -Nur linux-4.1.13.orig/include/linux/console.h linux-4.1.13/include/linux/console.h
+--- linux-4.1.13.orig/include/linux/console.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/linux/console.h	2015-12-04 19:57:05.901978752 +0100
+@@ -127,6 +127,7 @@
+ 	short	flags;
+ 	short	index;
+ 	int	cflag;
++	int	baud;
+ 	void	*data;
+ 	struct	 console *next;
+ };
+diff -Nur linux-4.1.13.orig/include/linux/ipv6.h linux-4.1.13/include/linux/ipv6.h
+--- linux-4.1.13.orig/include/linux/ipv6.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/linux/ipv6.h	2015-12-04 19:57:05.917977705 +0100
+@@ -5,6 +5,7 @@
+ 
+ #define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
+ #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
++
+ /*
+  * This structure contains configuration options per IPv6 link.
+  */
+diff -Nur linux-4.1.13.orig/include/linux/mtd/physmap.h linux-4.1.13/include/linux/mtd/physmap.h
+--- linux-4.1.13.orig/include/linux/mtd/physmap.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/linux/mtd/physmap.h	2015-12-04 19:57:03.830114307 +0100
+@@ -25,6 +25,8 @@
+ 	unsigned int		width;
+ 	int			(*init)(struct platform_device *);
+ 	void			(*exit)(struct platform_device *);
++	void			(*lock)(struct platform_device *);
++	void			(*unlock)(struct platform_device *);
+ 	void			(*set_vpp)(struct platform_device *, int);
+ 	unsigned int		nr_parts;
+ 	unsigned int		pfow_base;
+diff -Nur linux-4.1.13.orig/include/linux/myloader.h linux-4.1.13/include/linux/myloader.h
+--- linux-4.1.13.orig/include/linux/myloader.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/myloader.h	2015-12-04 20:10:00.684874021 +0100
+@@ -0,0 +1,121 @@
++/*
++ *  Compex's MyLoader specific definitions
++ *
++ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#ifndef _MYLOADER_H_
++#define _MYLOADER_H_
++
++/* Myloader specific magic numbers */
++#define MYLO_MAGIC_SYS_PARAMS	0x20021107
++#define MYLO_MAGIC_PARTITIONS	0x20021103
++#define MYLO_MAGIC_BOARD_PARAMS	0x20021103
++
++/* Vendor ID's (seems to be same as the PCI vendor ID's) */
++#define VENID_COMPEX		0x11F6
++
++/* Devices based on the ADM5120 */
++#define DEVID_COMPEX_NP27G	0x0078
++#define DEVID_COMPEX_NP28G	0x044C
++#define DEVID_COMPEX_NP28GHS	0x044E
++#define DEVID_COMPEX_WP54Gv1C	0x0514
++#define DEVID_COMPEX_WP54G	0x0515
++#define DEVID_COMPEX_WP54AG	0x0546
++#define DEVID_COMPEX_WPP54AG	0x0550
++#define DEVID_COMPEX_WPP54G	0x0555
++
++/* Devices based on the Atheros AR2317 */
++#define DEVID_COMPEX_NP25G	0x05E6
++#define DEVID_COMPEX_WPE53G	0x05DC
++
++/* Devices based on the Atheros AR71xx */
++#define DEVID_COMPEX_WP543	0x0640
++#define DEVID_COMPEX_WPE72	0x0672
++
++/* Devices based on the IXP422 */
++#define DEVID_COMPEX_WP18	0x047E
++#define DEVID_COMPEX_NP18A	0x0489
++
++/* Other devices */
++#define DEVID_COMPEX_NP26G8M	0x03E8
++#define DEVID_COMPEX_NP26G16M	0x03E9
++
++struct mylo_partition {
++	uint16_t	flags;	/* partition flags */
++	uint16_t	type;	/* type of the partition */
++	uint32_t	addr;	/* relative address of the partition from the
++				   flash start */
++	uint32_t	size;	/* size of the partition in bytes */
++	uint32_t	param;	/* if this is the active partition, the
++				   MyLoader load code to this address */
++};
++
++#define PARTITION_FLAG_ACTIVE	0x8000 /* this is the active partition,
++					* MyLoader loads firmware from here */
++#define PARTITION_FLAG_ISRAM	0x2000 /* FIXME: this is a RAM partition? */
++#define PARTIIION_FLAG_RAMLOAD	0x1000 /* FIXME: load this partition into the RAM? */
++#define PARTITION_FLAG_PRELOAD	0x0800 /* the partition data preloaded to RAM
++					* before decompression */
++#define PARTITION_FLAG_LZMA	0x0100 /* partition data compressed by LZMA */
++#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
++
++#define PARTITION_TYPE_FREE	0
++#define PARTITION_TYPE_USED	1
++
++#define MYLO_MAX_PARTITIONS	8	/* maximum number of partitions in the
++					   partition table */
++
++struct mylo_partition_table {
++	uint32_t	magic;		/* must be MYLO_MAGIC_PARTITIONS */
++	uint32_t	res0;		/* unknown/unused */
++	uint32_t	res1;		/* unknown/unused */
++	uint32_t 	res2;		/* unknown/unused */
++	struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
++};
++
++struct mylo_partition_header {
++	uint32_t	len;		/* length of the partition data */
++	uint32_t	crc;		/* CRC value of the partition data */
++};
++
++struct mylo_system_params {
++	uint32_t	magic;		/* must be MYLO_MAGIC_SYS_PARAMS */
++	uint32_t	res0;
++	uint32_t	res1;
++	uint32_t	mylo_ver;
++	uint16_t	vid;		/* Vendor ID */
++	uint16_t	did;		/* Device ID */
++	uint16_t	svid;		/* Sub Vendor ID */
++	uint16_t	sdid;		/* Sub Device ID */
++	uint32_t	rev;		/* device revision */
++	uint32_t	fwhi;
++	uint32_t	fwlo;
++	uint32_t	tftp_addr;
++	uint32_t	prog_start;
++	uint32_t	flash_size;	/* size of boot FLASH in bytes */
++	uint32_t	dram_size;	/* size of onboard RAM in bytes */
++};
++
++struct mylo_eth_addr {
++	uint8_t	mac[6];
++	uint8_t	csum[2];
++};
++
++#define MYLO_ETHADDR_COUNT	8	/* maximum number of ethernet address
++					   in the board parameters */
++
++struct mylo_board_params {
++	uint32_t	magic;	/* must be MYLO_MAGIC_BOARD_PARAMS */
++	uint32_t	res0;
++	uint32_t	res1;
++	uint32_t	res2;
++	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
++};
++
++#endif /* _MYLOADER_H_*/
+diff -Nur linux-4.1.13.orig/include/linux/nxp_74hc153.h linux-4.1.13/include/linux/nxp_74hc153.h
+--- linux-4.1.13.orig/include/linux/nxp_74hc153.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/nxp_74hc153.h	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,24 @@
++/*
++ *  NXP 74HC153 - Dual 4-input multiplexer defines
++ *
++ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ */
++
++#ifndef _NXP_74HC153_H
++#define _NXP_74HC153_H
++
++#define NXP_74HC153_DRIVER_NAME "nxp-74hc153"
++
++struct nxp_74hc153_platform_data {
++	unsigned	gpio_base;
++	unsigned	gpio_pin_s0;
++	unsigned	gpio_pin_s1;
++	unsigned	gpio_pin_1y;
++	unsigned	gpio_pin_2y;
++};
++
++#endif /* _NXP_74HC153_H */
+diff -Nur linux-4.1.13.orig/include/linux/phy.h linux-4.1.13/include/linux/phy.h
+--- linux-4.1.13.orig/include/linux/phy.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/linux/phy.h	2015-12-04 20:31:10.916990579 +0100
+@@ -762,6 +762,7 @@
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
+ void phy_print_status(struct phy_device *phydev);
+diff -Nur linux-4.1.13.orig/include/linux/platform/ar934x_nfc.h linux-4.1.13/include/linux/platform/ar934x_nfc.h
+--- linux-4.1.13.orig/include/linux/platform/ar934x_nfc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/platform/ar934x_nfc.h	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,39 @@
++/*
++ * Platform data definition for the built-in NAND controller of the
++ * Atheros AR934x SoCs
++ *
++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef _AR934X_NFC_PLATFORM_H
++#define _AR934X_NFC_PLATFORM_H
++
++#define AR934X_NFC_DRIVER_NAME		"ar934x-nfc"
++
++struct mtd_info;
++struct mtd_partition;
++
++enum ar934x_nfc_ecc_mode {
++	AR934X_NFC_ECC_SOFT = 0,
++	AR934X_NFC_ECC_HW,
++	AR934X_NFC_ECC_SOFT_BCH,
++};
++
++struct ar934x_nfc_platform_data {
++	const char *name;
++	struct mtd_partition *parts;
++	int nr_parts;
++
++	bool swap_dma;
++	enum ar934x_nfc_ecc_mode ecc_mode;
++
++	void (*hw_reset)(bool active);
++	void (*select_chip)(int chip_no);
++	int (*scan_fixup)(struct mtd_info *mtd);
++};
++
++#endif /* _AR934X_NFC_PLATFORM_H */
+diff -Nur linux-4.1.13.orig/include/linux/platform_data/gpio-latch.h linux-4.1.13/include/linux/platform_data/gpio-latch.h
+--- linux-4.1.13.orig/include/linux/platform_data/gpio-latch.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/platform_data/gpio-latch.h	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,14 @@
++#ifndef _GPIO_LATCH_H_
++#define _GPIO_LATCH_H_
++
++#define GPIO_LATCH_DRIVER_NAME	"gpio-latch"
++
++struct gpio_latch_platform_data {
++	int base;
++	int num_gpios;
++	int *gpios;
++	int le_gpio_index;
++	bool le_active_low;
++};
++
++#endif /* _GPIO_LATCH_H_ */
+diff -Nur linux-4.1.13.orig/include/linux/platform_data/phy-at803x.h linux-4.1.13/include/linux/platform_data/phy-at803x.h
+--- linux-4.1.13.orig/include/linux/platform_data/phy-at803x.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/platform_data/phy-at803x.h	2015-12-04 19:57:03.890110382 +0100
+@@ -0,0 +1,11 @@
++#ifndef _PHY_AT803X_PDATA_H
++#define _PHY_AT803X_PDATA_H
++
++struct at803x_platform_data {
++	int disable_smarteee:1;
++	int enable_rgmii_tx_delay:1;
++	int enable_rgmii_rx_delay:1;
++	int fixup_rgmii_tx_delay:1;
++};
++
++#endif /* _PHY_AT803X_PDATA_H */
+diff -Nur linux-4.1.13.orig/include/linux/platform_data/rb91x_nand.h linux-4.1.13/include/linux/platform_data/rb91x_nand.h
+--- linux-4.1.13.orig/include/linux/platform_data/rb91x_nand.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/platform_data/rb91x_nand.h	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,16 @@
++#ifndef _RB91X_NAND_H_
++#define _RB91X_NAND_H_
++
++#define RB91X_NAND_DRIVER_NAME	"rb91x-nand"
++
++struct rb91x_nand_platform_data {
++	int gpio_nce;	/* chip enable, active low */
++	int gpio_ale;	/* address latch enable */
++	int gpio_cle;   /* command latch enable */
++	int gpio_rdy;
++	int gpio_read;
++	int gpio_nrw;	/* read/write enable, active low */
++	int gpio_nle;	/* latch enable, active low */
++};
++
++#endif /* _RB91X_NAND_H_ */
+\ No newline at end of file
+diff -Nur linux-4.1.13.orig/include/linux/rle.h linux-4.1.13/include/linux/rle.h
+--- linux-4.1.13.orig/include/linux/rle.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/rle.h	2015-12-04 19:57:03.830114307 +0100
+@@ -0,0 +1,18 @@
++#ifndef _RLE_H_
++#define _RLE_H_
++
++#ifdef CONFIG_RLE_DECOMPRESS
++int rle_decode(const unsigned char *src, size_t srclen,
++	       unsigned char *dst, size_t dstlen,
++	       size_t *src_done, size_t *dst_done);
++#else
++static inline int
++rle_decode(const unsigned char *src, size_t srclen,
++	   unsigned char *dst, size_t dstlen,
++	   size_t *src_done, size_t *dst_done)
++{
++	return -ENOTSUPP;
++}
++#endif /* CONFIG_RLE_DECOMPRESS */
++
++#endif /* _RLE_H_ */
+diff -Nur linux-4.1.13.orig/include/linux/spi/74x164.h linux-4.1.13/include/linux/spi/74x164.h
+--- linux-4.1.13.orig/include/linux/spi/74x164.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/spi/74x164.h	2015-12-04 19:57:03.930107765 +0100
+@@ -0,0 +1,13 @@
++#ifndef LINUX_SPI_74X164_H
++#define LINUX_SPI_74X164_H
++
++struct gen_74x164_chip_platform_data {
++	/* number assigned to the first GPIO */
++	unsigned        base;
++	/* number of chained registers */
++	unsigned	num_registers;
++	/* address of a buffer containing initial data */
++	u8		*init_data;
++};
++
++#endif
+diff -Nur linux-4.1.13.orig/include/linux/spi/flash.h linux-4.1.13/include/linux/spi/flash.h
+--- linux-4.1.13.orig/include/linux/spi/flash.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/linux/spi/flash.h	2015-12-04 19:57:03.854112737 +0100
+@@ -24,6 +24,7 @@
+ 	unsigned int	nr_parts;
+ 
+ 	char		*type;
++	const char	**part_probes;
+ 
+ 	/* we'll likely add more ... use JEDEC IDs, etc */
+ };
+diff -Nur linux-4.1.13.orig/include/linux/spi/spi_bitbang.h linux-4.1.13/include/linux/spi/spi_bitbang.h
+--- linux-4.1.13.orig/include/linux/spi/spi_bitbang.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/linux/spi/spi_bitbang.h	2015-12-04 19:57:03.934107503 +0100
+@@ -39,6 +39,7 @@
+ extern void spi_bitbang_cleanup(struct spi_device *spi);
+ extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+ 				      struct spi_transfer *t);
++extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t);
+ 
+ /* start or stop queue processing */
+ extern int spi_bitbang_start(struct spi_bitbang *spi);
+diff -Nur linux-4.1.13.orig/include/linux/spi/spi.h linux-4.1.13/include/linux/spi/spi.h
+--- linux-4.1.13.orig/include/linux/spi/spi.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/linux/spi/spi.h	2015-12-04 19:57:03.966105410 +0100
+@@ -506,6 +506,12 @@
+ 
+ /*---------------------------------------------------------------------------*/
+ 
++enum spi_transfer_type {
++	SPI_TRANSFER_GENERIC = 0,
++	SPI_TRANSFER_FLASH_READ_CMD,
++	SPI_TRANSFER_FLASH_READ_DATA,
++};
++
+ /*
+  * I/O INTERFACE between SPI controller and protocol drivers
+  *
+@@ -618,12 +624,16 @@
+ 	unsigned	cs_change:1;
+ 	unsigned	tx_nbits:3;
+ 	unsigned	rx_nbits:3;
++	unsigned	verify:1;
++	unsigned	fast_write:1;
+ #define	SPI_NBITS_SINGLE	0x01 /* 1bit transfer */
+ #define	SPI_NBITS_DUAL		0x02 /* 2bits transfer */
+ #define	SPI_NBITS_QUAD		0x04 /* 4bits transfer */
+ 	u8		bits_per_word;
+ 	u16		delay_usecs;
+ 	u32		speed_hz;
++	enum spi_transfer_type type;
++	bool dummy;
+ 
+ 	struct list_head transfer_list;
+ };
+@@ -663,6 +673,7 @@
+ 	struct spi_device	*spi;
+ 
+ 	unsigned		is_dma_mapped:1;
++	unsigned		fast_read:1;
+ 
+ 	/* REVISIT:  we might want a flag affecting the behavior of the
+ 	 * last transfer ... allowing things like "read 16 bit length L"
+diff -Nur linux-4.1.13.orig/include/linux/spi/vsc7385.h linux-4.1.13/include/linux/spi/vsc7385.h
+--- linux-4.1.13.orig/include/linux/spi/vsc7385.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/spi/vsc7385.h	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,19 @@
++/*
++ * Platform data definition for the Vitesse VSC7385 ethernet switch driver
++ *
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++struct vsc7385_platform_data {
++	void		(*reset)(void);
++	char		*ucode_name;
++	struct {
++		u32	tx_ipg:5;
++		u32	bit2:1;
++		u32	clk_sel:3;
++	} mac_cfg;
++};
+diff -Nur linux-4.1.13.orig/include/linux/switch.h linux-4.1.13/include/linux/switch.h
+--- linux-4.1.13.orig/include/linux/switch.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/linux/switch.h	2015-12-04 20:52:15.735681740 +0100
+@@ -0,0 +1,169 @@
++/*
++ * switch.h: Switch configuration API
++ *
++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++#ifndef _LINUX_SWITCH_H
++#define _LINUX_SWITCH_H
++
++#include <net/genetlink.h>
++#include <uapi/linux/switch.h>
++
++struct switch_dev;
++struct switch_op;
++struct switch_val;
++struct switch_attr;
++struct switch_attrlist;
++struct switch_led_trigger;
++
++int register_switch(struct switch_dev *dev, struct net_device *netdev);
++void unregister_switch(struct switch_dev *dev);
++
++/**
++ * struct switch_attrlist - attribute list
++ *
++ * @n_attr: number of attributes
++ * @attr: pointer to the attributes array
++ */
++struct switch_attrlist {
++	int n_attr;
++	const struct switch_attr *attr;
++};
++
++enum switch_port_speed {
++	SWITCH_PORT_SPEED_UNKNOWN = 0,
++	SWITCH_PORT_SPEED_10 = 10,
++	SWITCH_PORT_SPEED_100 = 100,
++	SWITCH_PORT_SPEED_1000 = 1000,
++};
++
++struct switch_port_link {
++	bool link;
++	bool duplex;
++	bool aneg;
++	bool tx_flow;
++	bool rx_flow;
++	enum switch_port_speed speed;
++	/* in ethtool adv_t format */
++	u32 eee;
++};
++
++struct switch_port_stats {
++	unsigned long tx_bytes;
++	unsigned long rx_bytes;
++};
++
++/**
++ * struct switch_dev_ops - switch driver operations
++ *
++ * @attr_global: global switch attribute list
++ * @attr_port: port attribute list
++ * @attr_vlan: vlan attribute list
++ *
++ * Callbacks:
++ *
++ * @get_vlan_ports: read the port list of a VLAN
++ * @set_vlan_ports: set the port list of a VLAN
++ *
++ * @get_port_pvid: get the primary VLAN ID of a port
++ * @set_port_pvid: set the primary VLAN ID of a port
++ *
++ * @apply_config: apply all changed settings to the switch
++ * @reset_switch: resetting the switch
++ */
++struct switch_dev_ops {
++	struct switch_attrlist attr_global, attr_port, attr_vlan;
++
++	int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
++	int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
++
++	int (*get_port_pvid)(struct switch_dev *dev, int port, int *val);
++	int (*set_port_pvid)(struct switch_dev *dev, int port, int val);
++
++	int (*apply_config)(struct switch_dev *dev);
++	int (*reset_switch)(struct switch_dev *dev);
++
++	int (*get_port_link)(struct switch_dev *dev, int port,
++			     struct switch_port_link *link);
++	int (*get_port_stats)(struct switch_dev *dev, int port,
++			      struct switch_port_stats *stats);
++};
++
++struct switch_dev {
++	struct device_node *of_node;
++	const struct switch_dev_ops *ops;
++	/* will be automatically filled */
++	char devname[IFNAMSIZ];
++
++	const char *name;
++	/* NB: either alias or netdev must be set */
++	const char *alias;
++	struct net_device *netdev;
++
++	int ports;
++	int vlans;
++	int cpu_port;
++
++	/* the following fields are internal for swconfig */
++	int id;
++	struct list_head dev_list;
++	unsigned long def_global, def_port, def_vlan;
++
++	struct mutex sw_mutex;
++	struct switch_port *portbuf;
++	struct switch_portmap *portmap;
++
++	char buf[128];
++
++#ifdef CONFIG_SWCONFIG_LEDS
++	struct switch_led_trigger *led_trigger;
++#endif
++};
++
++struct switch_port {
++	u32 id;
++	u32 flags;
++};
++
++struct switch_portmap {
++	u32 virt;
++	const char *s;
++};
++
++struct switch_val {
++	const struct switch_attr *attr;
++	int port_vlan;
++	int len;
++	union {
++		const char *s;
++		u32 i;
++		struct switch_port *ports;
++	} value;
++};
++
++struct switch_attr {
++	int disabled;
++	int type;
++	const char *name;
++	const char *description;
++
++	int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
++	int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
++
++	/* for driver internal use */
++	int id;
++	int ofs;
++	int max;
++};
++
++#endif /* _LINUX_SWITCH_H */
+diff -Nur linux-4.1.13.orig/include/linux/types.h linux-4.1.13/include/linux/types.h
+--- linux-4.1.13.orig/include/linux/types.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/linux/types.h	2015-12-04 19:57:05.925977182 +0100
+@@ -215,5 +215,11 @@
+ /* clocksource cycle base type */
+ typedef u64 cycle_t;
+ 
++struct net_hdr_word {
++       u32 words[1];
++} __attribute__((packed, aligned(2)));
++
++#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
++
+ #endif /*  __ASSEMBLY__ */
+ #endif /* _LINUX_TYPES_H */
+diff -Nur linux-4.1.13.orig/include/linux/usb/ehci_pdriver.h linux-4.1.13/include/linux/usb/ehci_pdriver.h
+--- linux-4.1.13.orig/include/linux/usb/ehci_pdriver.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/linux/usb/ehci_pdriver.h	2015-12-04 20:18:56.085517295 +0100
+@@ -49,6 +49,8 @@
+ 	unsigned	no_io_watchdog:1;
+ 	unsigned	reset_on_resume:1;
+ 	unsigned	dma_mask_64:1;
++	unsigned	qca_force_host_mode:1;
++	unsigned	qca_force_16bit_ptw:1;
+ 
+ 	/* Turn on all power and clocks */
+ 	int (*power_on)(struct platform_device *pdev);
+@@ -58,6 +60,7 @@
+ 	 * turn off everything else */
+ 	void (*power_suspend)(struct platform_device *pdev);
+ 	int (*pre_setup)(struct usb_hcd *hcd);
++	void (*reset_notifier)(struct platform_device *pdev);
+ };
+ 
+ #endif /* __USB_CORE_EHCI_PDRIVER_H */
+diff -Nur linux-4.1.13.orig/include/net/addrconf.h linux-4.1.13/include/net/addrconf.h
+--- linux-4.1.13.orig/include/net/addrconf.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/net/addrconf.h	2015-12-04 19:57:05.929976920 +0100
+@@ -43,7 +43,7 @@
+ 	__be32			reserved2;
+ 
+ 	struct in6_addr		prefix;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ #include <linux/netdevice.h>
+diff -Nur linux-4.1.13.orig/include/net/inet_ecn.h linux-4.1.13/include/net/inet_ecn.h
+--- linux-4.1.13.orig/include/net/inet_ecn.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/net/inet_ecn.h	2015-12-04 19:57:05.929976920 +0100
+@@ -115,13 +115,13 @@
+ {
+ 	if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
+ 		return 0;
+-	*(__be32*)iph |= htonl(INET_ECN_CE << 20);
++	net_hdr_word(iph) |= htonl(INET_ECN_CE << 20);
+ 	return 1;
+ }
+ 
+ static inline void IP6_ECN_clear(struct ipv6hdr *iph)
+ {
+-	*(__be32*)iph &= ~htonl(INET_ECN_MASK << 20);
++	net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20);
+ }
+ 
+ static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
+diff -Nur linux-4.1.13.orig/include/net/ipv6.h linux-4.1.13/include/net/ipv6.h
+--- linux-4.1.13.orig/include/net/ipv6.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/net/ipv6.h	2015-12-04 19:57:05.929976920 +0100
+@@ -107,7 +107,7 @@
+ 	__u8	reserved;
+ 	__be16	frag_off;
+ 	__be32	identification;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ #define	IP6_MF		0x0001
+ #define	IP6_OFFSET	0xFFF8
+@@ -396,8 +396,8 @@
+ 	}
+ #endif
+ #endif
+-	addr[0] = wh;
+-	addr[1] = wl;
++	net_hdr_word(&addr[0]) = wh;
++	net_hdr_word(&addr[1]) = wl;
+ }
+ 
+ static inline void ipv6_addr_set(struct in6_addr *addr, 
+@@ -456,6 +456,8 @@
+ 	const __be32 *a1 = addr1->s6_addr32;
+ 	const __be32 *a2 = addr2->s6_addr32;
+ 	unsigned int pdw, pbi;
++	/* Used for last <32-bit fraction of prefix */
++	u32 pbia1, pbia2;
+ 
+ 	/* check complete u32 in prefix */
+ 	pdw = prefixlen >> 5;
+@@ -464,7 +466,9 @@
+ 
+ 	/* check incomplete u32 in prefix */
+ 	pbi = prefixlen & 0x1f;
+-	if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
++	pbia1 = net_hdr_word(&a1[pdw]);
++	pbia2 = net_hdr_word(&a2[pdw]);
++	if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
+ 		return false;
+ 
+ 	return true;
+@@ -607,13 +611,13 @@
+  */
+ static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
+ {
+-	const __be32 *a1 = token1, *a2 = token2;
++	const struct in6_addr *a1 = token1, *a2 = token2;
+ 	int i;
+ 
+ 	addrlen >>= 2;
+ 
+ 	for (i = 0; i < addrlen; i++) {
+-		__be32 xb = a1[i] ^ a2[i];
++		__be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
+ 		if (xb)
+ 			return i * 32 + 31 - __fls(ntohl(xb));
+ 	}
+@@ -739,17 +743,18 @@
+ static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
+ 				__be32 flowlabel)
+ {
+-	*(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
++	net_hdr_word((__be32 *)hdr) =
++		htonl(0x60000000 | (tclass << 20)) | flowlabel;
+ }
+ 
+ static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
+ {
+-	return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
++	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
+ }
+ 
+ static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
+ {
+-	return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
++	return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
+ }
+ 
+ static inline u8 ip6_tclass(__be32 flowinfo)
+diff -Nur linux-4.1.13.orig/include/net/ndisc.h linux-4.1.13/include/net/ndisc.h
+--- linux-4.1.13.orig/include/net/ndisc.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/net/ndisc.h	2015-12-04 19:57:05.929976920 +0100
+@@ -76,7 +76,7 @@
+         struct icmp6hdr		icmph;
+ 	__be32			reachable_time;
+ 	__be32			retrans_timer;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct rd_msg {
+ 	struct icmp6hdr icmph;
+@@ -148,10 +148,10 @@
+ {
+ 	const u32 *p32 = pkey;
+ 
+-	return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
+-		(p32[1] * hash_rnd[1]) +
+-		(p32[2] * hash_rnd[2]) +
+-		(p32[3] * hash_rnd[3]));
++	return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
++		(net_hdr_word(&p32[1]) * hash_rnd[1]) +
++		(net_hdr_word(&p32[2]) * hash_rnd[2]) +
++		(net_hdr_word(&p32[3]) * hash_rnd[3]));
+ }
+ 
+ static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
+diff -Nur linux-4.1.13.orig/include/net/neighbour.h linux-4.1.13/include/net/neighbour.h
+--- linux-4.1.13.orig/include/net/neighbour.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/net/neighbour.h	2015-12-04 19:57:05.933976659 +0100
+@@ -262,8 +262,10 @@
+ 	const u32 *n32 = (const u32 *)n->primary_key;
+ 	const u32 *p32 = pkey;
+ 
+-	return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
+-		(n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
++	return ((n32[0] ^ net_hdr_word(&p32[0])) |
++		(n32[1] ^ net_hdr_word(&p32[1])) |
++		(n32[2] ^ net_hdr_word(&p32[2])) |
++		(n32[3] ^ net_hdr_word(&p32[3]))) == 0;
+ }
+ 
+ static inline struct neighbour *___neigh_lookup_noref(
+diff -Nur linux-4.1.13.orig/include/net/secure_seq.h linux-4.1.13/include/net/secure_seq.h
+--- linux-4.1.13.orig/include/net/secure_seq.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/net/secure_seq.h	2015-12-04 19:57:05.929976920 +0100
+@@ -2,6 +2,7 @@
+ #define _NET_SECURE_SEQ
+ 
+ #include <linux/types.h>
++#include <linux/in6.h>
+ 
+ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
+ u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+diff -Nur linux-4.1.13.orig/include/uapi/linux/icmp.h linux-4.1.13/include/uapi/linux/icmp.h
+--- linux-4.1.13.orig/include/uapi/linux/icmp.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/icmp.h	2015-12-04 19:57:05.917977705 +0100
+@@ -80,7 +80,7 @@
+ 		__be16	mtu;
+ 	} frag;
+   } un;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ /*
+diff -Nur linux-4.1.13.orig/include/uapi/linux/icmpv6.h linux-4.1.13/include/uapi/linux/icmpv6.h
+--- linux-4.1.13.orig/include/uapi/linux/icmpv6.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/icmpv6.h	2015-12-04 19:57:05.929976920 +0100
+@@ -76,7 +76,7 @@
+ #define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
+ #define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
+ #define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ #define ICMPV6_ROUTER_PREF_LOW		0x3
+diff -Nur linux-4.1.13.orig/include/uapi/linux/if_pppox.h linux-4.1.13/include/uapi/linux/if_pppox.h
+--- linux-4.1.13.orig/include/uapi/linux/if_pppox.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/if_pppox.h	2015-12-04 19:57:05.933976659 +0100
+@@ -47,6 +47,7 @@
+  */
+ struct pptp_addr {
+ 	__u16		call_id;
++	__u16		pad;
+ 	struct in_addr	sin_addr;
+ };
+ 
+diff -Nur linux-4.1.13.orig/include/uapi/linux/igmp.h linux-4.1.13/include/uapi/linux/igmp.h
+--- linux-4.1.13.orig/include/uapi/linux/igmp.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/igmp.h	2015-12-04 19:57:05.929976920 +0100
+@@ -32,7 +32,7 @@
+ 	__u8 code;		/* For newer IGMP */
+ 	__sum16 csum;
+ 	__be32 group;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ /* V3 group record types [grec_type] */
+ #define IGMPV3_MODE_IS_INCLUDE		1
+@@ -48,7 +48,7 @@
+ 	__be16	grec_nsrcs;
+ 	__be32	grec_mca;
+ 	__be32	grec_src[0];
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct igmpv3_report {
+ 	__u8 type;
+@@ -57,7 +57,7 @@
+ 	__be16 resv2;
+ 	__be16 ngrec;
+ 	struct igmpv3_grec grec[0];
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ struct igmpv3_query {
+ 	__u8 type;
+@@ -78,7 +78,7 @@
+ 	__u8 qqic;
+ 	__be16 nsrcs;
+ 	__be32 srcs[0];
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ #define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
+ #define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
+diff -Nur linux-4.1.13.orig/include/uapi/linux/in6.h linux-4.1.13/include/uapi/linux/in6.h
+--- linux-4.1.13.orig/include/uapi/linux/in6.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/in6.h	2015-12-04 19:57:05.917977705 +0100
+@@ -42,7 +42,7 @@
+ #define s6_addr16		in6_u.u6_addr16
+ #define s6_addr32		in6_u.u6_addr32
+ #endif
+-};
++} __attribute__((packed, aligned(2)));
+ #endif /* __UAPI_DEF_IN6_ADDR */
+ 
+ #if __UAPI_DEF_SOCKADDR_IN6
+diff -Nur linux-4.1.13.orig/include/uapi/linux/in.h linux-4.1.13/include/uapi/linux/in.h
+--- linux-4.1.13.orig/include/uapi/linux/in.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/in.h	2015-12-04 19:57:57.978571564 +0100
+@@ -78,7 +78,7 @@
+ /* Internet address. */
+ struct in_addr {
+ 	__be32	s_addr;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ #define IP_TOS		1
+ #define IP_TTL		2
+diff -Nur linux-4.1.13.orig/include/uapi/linux/ip.h linux-4.1.13/include/uapi/linux/ip.h
+--- linux-4.1.13.orig/include/uapi/linux/ip.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/ip.h	2015-12-04 19:57:05.913977967 +0100
+@@ -102,7 +102,7 @@
+ 	__be32	saddr;
+ 	__be32	daddr;
+ 	/*The options start here. */
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ struct ip_auth_hdr {
+diff -Nur linux-4.1.13.orig/include/uapi/linux/ipv6.h linux-4.1.13/include/uapi/linux/ipv6.h
+--- linux-4.1.13.orig/include/uapi/linux/ipv6.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/ipv6.h	2015-12-04 19:57:05.913977967 +0100
+@@ -129,7 +129,7 @@
+ 
+ 	struct	in6_addr	saddr;
+ 	struct	in6_addr	daddr;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ 
+ /* index values for the variables in ipv6_devconf */
+diff -Nur linux-4.1.13.orig/include/uapi/linux/Kbuild linux-4.1.13/include/uapi/linux/Kbuild
+--- linux-4.1.13.orig/include/uapi/linux/Kbuild	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/Kbuild	2015-12-04 21:33:39.775625531 +0100
+@@ -380,6 +380,7 @@
+ header-y += string.h
+ header-y += suspend_ioctls.h
+ header-y += swab.h
++header-y += switch.h
+ header-y += synclink.h
+ header-y += sysctl.h
+ header-y += sysinfo.h
+diff -Nur linux-4.1.13.orig/include/uapi/linux/netfilter_arp/arp_tables.h linux-4.1.13/include/uapi/linux/netfilter_arp/arp_tables.h
+--- linux-4.1.13.orig/include/uapi/linux/netfilter_arp/arp_tables.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/netfilter_arp/arp_tables.h	2015-12-04 19:57:05.933976659 +0100
+@@ -68,7 +68,7 @@
+ 	__u8 flags;
+ 	/* Inverse flags */
+ 	__u16 invflags;
+-};
++} __attribute__((aligned(4)));
+ 
+ /* Values for "flag" field in struct arpt_ip (general arp structure).
+  * No flags defined yet.
+diff -Nur linux-4.1.13.orig/include/uapi/linux/switch.h linux-4.1.13/include/uapi/linux/switch.h
+--- linux-4.1.13.orig/include/uapi/linux/switch.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/switch.h	2015-12-04 20:52:30.298718052 +0100
+@@ -0,0 +1,103 @@
++/*
++ * switch.h: Switch configuration API
++ *
++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#ifndef _UAPI_LINUX_SWITCH_H
++#define _UAPI_LINUX_SWITCH_H
++
++#include <linux/types.h>
++#include <linux/netdevice.h>
++#include <linux/netlink.h>
++#include <linux/genetlink.h>
++#ifndef __KERNEL__
++#include <netlink/netlink.h>
++#include <netlink/genl/genl.h>
++#include <netlink/genl/ctrl.h>
++#endif
++
++/* main attributes */
++enum {
++	SWITCH_ATTR_UNSPEC,
++	/* global */
++	SWITCH_ATTR_TYPE,
++	/* device */
++	SWITCH_ATTR_ID,
++	SWITCH_ATTR_DEV_NAME,
++	SWITCH_ATTR_ALIAS,
++	SWITCH_ATTR_NAME,
++	SWITCH_ATTR_VLANS,
++	SWITCH_ATTR_PORTS,
++	SWITCH_ATTR_PORTMAP,
++	SWITCH_ATTR_CPU_PORT,
++	/* attributes */
++	SWITCH_ATTR_OP_ID,
++	SWITCH_ATTR_OP_TYPE,
++	SWITCH_ATTR_OP_NAME,
++	SWITCH_ATTR_OP_PORT,
++	SWITCH_ATTR_OP_VLAN,
++	SWITCH_ATTR_OP_VALUE_INT,
++	SWITCH_ATTR_OP_VALUE_STR,
++	SWITCH_ATTR_OP_VALUE_PORTS,
++	SWITCH_ATTR_OP_DESCRIPTION,
++	/* port lists */
++	SWITCH_ATTR_PORT,
++	SWITCH_ATTR_MAX
++};
++
++enum {
++	/* port map */
++	SWITCH_PORTMAP_PORTS,
++	SWITCH_PORTMAP_SEGMENT,
++	SWITCH_PORTMAP_VIRT,
++	SWITCH_PORTMAP_MAX
++};
++
++/* commands */
++enum {
++	SWITCH_CMD_UNSPEC,
++	SWITCH_CMD_GET_SWITCH,
++	SWITCH_CMD_NEW_ATTR,
++	SWITCH_CMD_LIST_GLOBAL,
++	SWITCH_CMD_GET_GLOBAL,
++	SWITCH_CMD_SET_GLOBAL,
++	SWITCH_CMD_LIST_PORT,
++	SWITCH_CMD_GET_PORT,
++	SWITCH_CMD_SET_PORT,
++	SWITCH_CMD_LIST_VLAN,
++	SWITCH_CMD_GET_VLAN,
++	SWITCH_CMD_SET_VLAN
++};
++
++/* data types */
++enum switch_val_type {
++	SWITCH_TYPE_UNSPEC,
++	SWITCH_TYPE_INT,
++	SWITCH_TYPE_STRING,
++	SWITCH_TYPE_PORTS,
++	SWITCH_TYPE_NOVAL,
++};
++
++/* port nested attributes */
++enum {
++	SWITCH_PORT_UNSPEC,
++	SWITCH_PORT_ID,
++	SWITCH_PORT_FLAG_TAGGED,
++	SWITCH_PORT_ATTR_MAX
++};
++
++#define SWITCH_ATTR_DEFAULTS_OFFSET	0x1000
++
++
++#endif /* _UAPI_LINUX_SWITCH_H */
+diff -Nur linux-4.1.13.orig/include/uapi/linux/tcp.h linux-4.1.13/include/uapi/linux/tcp.h
+--- linux-4.1.13.orig/include/uapi/linux/tcp.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/tcp.h	2015-12-04 19:57:05.913977967 +0100
+@@ -54,7 +54,7 @@
+ 	__be16	window;
+ 	__sum16	check;
+ 	__be16	urg_ptr;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ /*
+  *	The union cast uses a gcc extension to avoid aliasing problems
+@@ -64,7 +64,7 @@
+ union tcp_word_hdr { 
+ 	struct tcphdr hdr;
+ 	__be32 		  words[5];
+-}; 
++} __attribute__((packed, aligned(2)));
+ 
+ #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
+ 
+diff -Nur linux-4.1.13.orig/include/uapi/linux/udp.h linux-4.1.13/include/uapi/linux/udp.h
+--- linux-4.1.13.orig/include/uapi/linux/udp.h	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/include/uapi/linux/udp.h	2015-12-04 19:57:05.917977705 +0100
+@@ -24,7 +24,7 @@
+ 	__be16	dest;
+ 	__be16	len;
+ 	__sum16	check;
+-};
++} __attribute__((packed, aligned(2)));
+ 
+ /* UDP socket options */
+ #define UDP_CORK	1	/* Never send partially complete segments */
+diff -Nur linux-4.1.13.orig/lib/Kconfig linux-4.1.13/lib/Kconfig
+--- linux-4.1.13.orig/lib/Kconfig	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/lib/Kconfig	2015-12-04 19:57:03.826114569 +0100
+@@ -235,6 +235,9 @@
+ 
+ source "lib/xz/Kconfig"
+ 
++config RLE_DECOMPRESS
++	tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+diff -Nur linux-4.1.13.orig/lib/rle.c linux-4.1.13/lib/rle.c
+--- linux-4.1.13.orig/lib/rle.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/lib/rle.c	2015-12-04 19:57:03.830114307 +0100
+@@ -0,0 +1,78 @@
++/*
++ *  RLE decoding routine
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/rle.h>
++
++int rle_decode(const unsigned char *src, size_t srclen,
++	       unsigned char *dst, size_t dstlen,
++	       size_t *src_done, size_t *dst_done)
++{
++	size_t srcpos, dstpos;
++	int ret;
++
++	srcpos = 0;
++	dstpos = 0;
++	ret = -EINVAL;
++
++	/* sanity checks */
++	if (!src || !srclen || !dst || !dstlen)
++		goto out;
++
++	while (1) {
++		char count;
++
++		if (srcpos >= srclen)
++			break;
++
++		count = (char) src[srcpos++];
++		if (count == 0) {
++			ret = 0;
++			break;
++		}
++
++		if (count > 0) {
++			unsigned char c;
++
++			if (srcpos >= srclen)
++				break;
++
++			c = src[srcpos++];
++
++			while (count--) {
++				if (dstpos >= dstlen)
++					break;
++
++				dst[dstpos++] = c;
++			}
++		} else {
++			count *= -1;
++
++			while (count--) {
++				if (srcpos >= srclen)
++					break;
++				if (dstpos >= dstlen)
++					break;
++				dst[dstpos++] = src[srcpos++];
++			}
++		}
++	}
++
++out:
++	if (src_done)
++		*src_done = srcpos;
++	if (dst_done)
++		*dst_done = dstpos;
++
++	return ret;
++}
++
++EXPORT_SYMBOL_GPL(rle_decode);
+diff -Nur linux-4.1.13.orig/net/core/flow_dissector.c linux-4.1.13/net/core/flow_dissector.c
+--- linux-4.1.13.orig/net/core/flow_dissector.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/core/flow_dissector.c	2015-12-04 19:57:05.929976920 +0100
+@@ -53,7 +53,7 @@
+ 		ports = __skb_header_pointer(skb, thoff + poff,
+ 					     sizeof(_ports), data, hlen, &_ports);
+ 		if (ports)
+-			return *ports;
++			return (__be32)net_hdr_word(ports);
+ 	}
+ 
+ 	return 0;
+diff -Nur linux-4.1.13.orig/net/core/secure_seq.c linux-4.1.13/net/core/secure_seq.c
+--- linux-4.1.13.orig/net/core/secure_seq.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/core/secure_seq.c	2015-12-04 19:57:05.929976920 +0100
+@@ -46,11 +46,12 @@
+ 	u32 secret[MD5_MESSAGE_BYTES / 4];
+ 	u32 hash[MD5_DIGEST_WORDS];
+ 	u32 i;
++	const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
+ 
+ 	net_secret_init();
+ 	memcpy(hash, saddr, 16);
+ 	for (i = 0; i < 4; i++)
+-		secret[i] = net_secret[i] + (__force u32)daddr[i];
++		secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i];
+ 	secret[4] = net_secret[4] +
+ 		(((__force u16)sport << 16) + (__force u16)dport);
+ 	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+@@ -68,11 +69,12 @@
+ 	u32 secret[MD5_MESSAGE_BYTES / 4];
+ 	u32 hash[MD5_DIGEST_WORDS];
+ 	u32 i;
++	const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
+ 
+ 	net_secret_init();
+ 	memcpy(hash, saddr, 16);
+ 	for (i = 0; i < 4; i++)
+-		secret[i] = net_secret[i] + (__force u32) daddr[i];
++		secret[i] = net_secret[i] + (__force u32) daddr6->s6_addr32[i];
+ 	secret[4] = net_secret[4] + (__force u32)dport;
+ 	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+ 		secret[i] = net_secret[i];
+@@ -150,11 +152,12 @@
+ 	u32 hash[MD5_DIGEST_WORDS];
+ 	u64 seq;
+ 	u32 i;
++	const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
+ 
+ 	net_secret_init();
+ 	memcpy(hash, saddr, 16);
+ 	for (i = 0; i < 4; i++)
+-		secret[i] = net_secret[i] + daddr[i];
++		secret[i] = net_secret[i] +  daddr6->s6_addr32[i];
+ 	secret[4] = net_secret[4] +
+ 		(((__force u16)sport << 16) + (__force u16)dport);
+ 	for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+diff -Nur linux-4.1.13.orig/net/dsa/mv88e6063.c linux-4.1.13/net/dsa/mv88e6063.c
+--- linux-4.1.13.orig/net/dsa/mv88e6063.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-4.1.13/net/dsa/mv88e6063.c	2015-09-13 20:04:35.076523692 +0200
+@@ -0,0 +1,294 @@
++/*
++ * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
++ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This driver was base on: net/dsa/mv88e6060.c
++ *   net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
++ *   Copyright (c) 2008-2009 Marvell Semiconductor
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/list.h>
++#include <linux/netdevice.h>
++#include <linux/phy.h>
++#include "dsa_priv.h"
++
++#define REG_BASE		0x10
++#define REG_PHY(p)		(REG_BASE + (p))
++#define REG_PORT(p)		(REG_BASE + 8 + (p))
++#define REG_GLOBAL		(REG_BASE + 0x0f)
++#define NUM_PORTS		7
++
++static int reg_read(struct dsa_switch *ds, int addr, int reg)
++{
++	return mdiobus_read(ds->master_mii_bus, addr, reg);
++}
++
++#define REG_READ(addr, reg)					\
++	({							\
++		int __ret;					\
++								\
++		__ret = reg_read(ds, addr, reg);		\
++		if (__ret < 0)					\
++			return __ret;				\
++		__ret;						\
++	})
++
++
++static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
++{
++	return mdiobus_write(ds->master_mii_bus, addr, reg, val);
++}
++
++#define REG_WRITE(addr, reg, val)				\
++	({							\
++		int __ret;					\
++								\
++		__ret = reg_write(ds, addr, reg, val);		\
++		if (__ret < 0)					\
++			return __ret;				\
++	})
++
++static char *mv88e6063_probe(struct mii_bus *bus, int sw_addr)
++{
++	int ret;
++
++	ret = mdiobus_read(bus, REG_PORT(0), 0x03);
++	if (ret >= 0) {
++		ret &= 0xfff0;
++		if (ret == 0x1530)
++			return "Marvell 88E6063";
++	}
++
++	return NULL;
++}
++
++static int mv88e6063_switch_reset(struct dsa_switch *ds)
++{
++	int i;
++	int ret;
++
++	/*
++	 * Set all ports to the disabled state.
++	 */
++	for (i = 0; i < NUM_PORTS; i++) {
++		ret = REG_READ(REG_PORT(i), 0x04);
++		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
++	}
++
++	/*
++	 * Wait for transmit queues to drain.
++	 */
++	msleep(2);
++
++	/*
++	 * Reset the switch.
++	 */
++	REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
++
++	/*
++	 * Wait up to one second for reset to complete.
++	 */
++	for (i = 0; i < 1000; i++) {
++		ret = REG_READ(REG_GLOBAL, 0x00);
++		if ((ret & 0x8000) == 0x0000)
++			break;
++
++		msleep(1);
++	}
++	if (i == 1000)
++		return -ETIMEDOUT;
++
++	return 0;
++}
++
++static int mv88e6063_setup_global(struct dsa_switch *ds)
++{
++	/*
++	 * Disable discarding of frames with excessive collisions,
++	 * set the maximum frame size to 1536 bytes, and mask all
++	 * interrupt sources.
++	 */
++	REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
++
++	/*
++	 * Enable automatic address learning, set the address
++	 * database size to 1024 entries, and set the default aging
++	 * time to 5 minutes.
++	 */
++	REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
++
++	return 0;
++}
++
++static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
++{
++	int addr = REG_PORT(p);
++
++	/*
++	 * Do not force flow control, disable Ingress and Egress
++	 * Header tagging, disable VLAN tunneling, and set the port
++	 * state to Forwarding.  Additionally, if this is the CPU
++	 * port, enable Ingress and Egress Trailer tagging mode.
++	 */
++	REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);
++
++	/*
++	 * Port based VLAN map: give each port its own address
++	 * database, allow the CPU port to talk to each of the 'real'
++	 * ports, and allow each of the 'real' ports to only talk to
++	 * the CPU port.
++	 */
++	REG_WRITE(addr, 0x06,
++			((p & 0xf) << 12) |
++			 (dsa_is_cpu_port(ds, p) ?
++				ds->phys_port_mask :
++				(1 << ds->dst->cpu_port)));
++
++	/*
++	 * Port Association Vector: when learning source addresses
++	 * of packets, add the address to the address database using
++	 * a port bitmap that has only the bit for this port set and
++	 * the other bits clear.
++	 */
++	REG_WRITE(addr, 0x0b, 1 << p);
++
++	return 0;
++}
++
++static int mv88e6063_setup(struct dsa_switch *ds)
++{
++	int i;
++	int ret;
++
++	ret = mv88e6063_switch_reset(ds);
++	if (ret < 0)
++		return ret;
++
++	/* @@@ initialise atu */
++
++	ret = mv88e6063_setup_global(ds);
++	if (ret < 0)
++		return ret;
++
++	for (i = 0; i < NUM_PORTS; i++) {
++		ret = mv88e6063_setup_port(ds, i);
++		if (ret < 0)
++			return ret;
++	}
++
++	return 0;
++}
++
++static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
++{
++	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
++	REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
++	REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
++
++	return 0;
++}
++
++static int mv88e6063_port_to_phy_addr(int port)
++{
++	if (port >= 0 && port <= NUM_PORTS)
++		return REG_PHY(port);
++	return -1;
++}
++
++static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
++{
++	int addr;
++
++	addr = mv88e6063_port_to_phy_addr(port);
++	if (addr == -1)
++		return 0xffff;
++
++	return reg_read(ds, addr, regnum);
++}
++
++static int
++mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
++{
++	int addr;
++
++	addr = mv88e6063_port_to_phy_addr(port);
++	if (addr == -1)
++		return 0xffff;
++
++	return reg_write(ds, addr, regnum, val);
++}
++
++static void mv88e6063_poll_link(struct dsa_switch *ds)
++{
++	int i;
++
++	for (i = 0; i < DSA_MAX_PORTS; i++) {
++		struct net_device *dev;
++		int uninitialized_var(port_status);
++		int link;
++		int speed;
++		int duplex;
++		int fc;
++
++		dev = ds->ports[i];
++		if (dev == NULL)
++			continue;
++
++		link = 0;
++		if (dev->flags & IFF_UP) {
++			port_status = reg_read(ds, REG_PORT(i), 0x00);
++			if (port_status < 0)
++				continue;
++
++			link = !!(port_status & 0x1000);
++		}
++
++		if (!link) {
++			if (netif_carrier_ok(dev)) {
++				printk(KERN_INFO "%s: link down\n", dev->name);
++				netif_carrier_off(dev);
++			}
++			continue;
++		}
++
++		speed = (port_status & 0x0100) ? 100 : 10;
++		duplex = (port_status & 0x0200) ? 1 : 0;
++		fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
++
++		if (!netif_carrier_ok(dev)) {
++			printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
++					 "flow control %sabled\n", dev->name,
++					 speed, duplex ? "full" : "half",
++					 fc ? "en" : "dis");
++			netif_carrier_on(dev);
++		}
++	}
++}
++
++static struct dsa_switch_driver mv88e6063_switch_driver = {
++	.tag_protocol	= htons(ETH_P_TRAILER),
++	.probe		= mv88e6063_probe,
++	.setup		= mv88e6063_setup,
++	.set_addr	= mv88e6063_set_addr,
++	.phy_read	= mv88e6063_phy_read,
++	.phy_write	= mv88e6063_phy_write,
++	.poll_link	= mv88e6063_poll_link,
++};
++
++static int __init mv88e6063_init(void)
++{
++	register_switch_driver(&mv88e6063_switch_driver);
++	return 0;
++}
++module_init(mv88e6063_init);
++
++static void __exit mv88e6063_cleanup(void)
++{
++	unregister_switch_driver(&mv88e6063_switch_driver);
++}
++module_exit(mv88e6063_cleanup);
+diff -Nur linux-4.1.13.orig/net/dsa/tag_trailer.c linux-4.1.13/net/dsa/tag_trailer.c
+--- linux-4.1.13.orig/net/dsa/tag_trailer.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/dsa/tag_trailer.c	2015-12-04 19:57:03.886110643 +0100
+@@ -84,7 +84,7 @@
+ 
+ 	trailer = skb_tail_pointer(skb) - 4;
+ 	if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+-	    (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
++	    (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+ 		goto out_drop;
+ 
+ 	source_port = trailer[1] & 7;
+diff -Nur linux-4.1.13.orig/net/ipv4/af_inet.c linux-4.1.13/net/ipv4/af_inet.c
+--- linux-4.1.13.orig/net/ipv4/af_inet.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv4/af_inet.c	2015-12-04 19:57:05.925977182 +0100
+@@ -1323,8 +1323,8 @@
+ 	if (unlikely(ip_fast_csum((u8 *)iph, 5)))
+ 		goto out_unlock;
+ 
+-	id = ntohl(*(__be32 *)&iph->id);
+-	flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
++	id = ntohl(net_hdr_word(&iph->id));
++	flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
+ 	id >>= 16;
+ 
+ 	for (p = *head; p; p = p->next) {
+diff -Nur linux-4.1.13.orig/net/ipv4/igmp.c linux-4.1.13/net/ipv4/igmp.c
+--- linux-4.1.13.orig/net/ipv4/igmp.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv4/igmp.c	2015-12-04 19:57:05.929976920 +0100
+@@ -496,7 +496,7 @@
+ 		if (!skb)
+ 			return NULL;
+ 		psrc = (__be32 *)skb_put(skb, sizeof(__be32));
+-		*psrc = psf->sf_inaddr;
++		net_hdr_word(psrc) = psf->sf_inaddr;
+ 		scount++; stotal++;
+ 		if ((type == IGMPV3_ALLOW_NEW_SOURCES ||
+ 		     type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) {
+diff -Nur linux-4.1.13.orig/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c linux-4.1.13/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+--- linux-4.1.13.orig/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c	2015-12-04 19:57:05.917977705 +0100
+@@ -41,8 +41,8 @@
+ 	if (ap == NULL)
+ 		return false;
+ 
+-	tuple->src.u3.ip = ap[0];
+-	tuple->dst.u3.ip = ap[1];
++	tuple->src.u3.ip = net_hdr_word(ap++);
++	tuple->dst.u3.ip = net_hdr_word(ap);
+ 
+ 	return true;
+ }
+diff -Nur linux-4.1.13.orig/net/ipv4/route.c linux-4.1.13/net/ipv4/route.c
+--- linux-4.1.13.orig/net/ipv4/route.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv4/route.c	2015-12-04 19:57:05.925977182 +0100
+@@ -450,7 +450,7 @@
+ 	else if (skb)
+ 		pkey = &ip_hdr(skb)->daddr;
+ 
+-	n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
++	n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
+ 	if (n)
+ 		return n;
+ 	return neigh_create(&arp_tbl, pkey, dev);
+diff -Nur linux-4.1.13.orig/net/ipv4/tcp_input.c linux-4.1.13/net/ipv4/tcp_input.c
+--- linux-4.1.13.orig/net/ipv4/tcp_input.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv4/tcp_input.c	2015-12-04 19:57:05.933976659 +0100
+@@ -3760,14 +3760,16 @@
+ {
+ 	const __be32 *ptr = (const __be32 *)(th + 1);
+ 
+-	if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
+-			  | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
++	if (net_hdr_word(ptr) ==
++	    htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++		  (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
+ 		tp->rx_opt.saw_tstamp = 1;
+ 		++ptr;
+-		tp->rx_opt.rcv_tsval = ntohl(*ptr);
++		tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
+ 		++ptr;
+-		if (*ptr)
+-			tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
++		if (net_hdr_word(ptr))
++			tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
++					       tp->tsoffset;
+ 		else
+ 			tp->rx_opt.rcv_tsecr = 0;
+ 		return true;
+diff -Nur linux-4.1.13.orig/net/ipv4/tcp_output.c linux-4.1.13/net/ipv4/tcp_output.c
+--- linux-4.1.13.orig/net/ipv4/tcp_output.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv4/tcp_output.c	2015-12-04 19:57:05.929976920 +0100
+@@ -452,48 +452,53 @@
+ 	u16 options = opts->options;	/* mungable copy */
+ 
+ 	if (unlikely(OPTION_MD5 & options)) {
+-		*ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+-			       (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++			      (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
+ 		/* overload cookie hash location */
+ 		opts->hash_location = (__u8 *)ptr;
+ 		ptr += 4;
+ 	}
+ 
+ 	if (unlikely(opts->mss)) {
+-		*ptr++ = htonl((TCPOPT_MSS << 24) |
+-			       (TCPOLEN_MSS << 16) |
+-			       opts->mss);
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
++			      opts->mss);
+ 	}
+ 
+ 	if (likely(OPTION_TS & options)) {
+ 		if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+-			*ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
+-				       (TCPOLEN_SACK_PERM << 16) |
+-				       (TCPOPT_TIMESTAMP << 8) |
+-				       TCPOLEN_TIMESTAMP);
++			net_hdr_word(ptr++) =
++				htonl((TCPOPT_SACK_PERM << 24) |
++				      (TCPOLEN_SACK_PERM << 16) |
++				      (TCPOPT_TIMESTAMP << 8) |
++				      TCPOLEN_TIMESTAMP);
+ 			options &= ~OPTION_SACK_ADVERTISE;
+ 		} else {
+-			*ptr++ = htonl((TCPOPT_NOP << 24) |
+-				       (TCPOPT_NOP << 16) |
+-				       (TCPOPT_TIMESTAMP << 8) |
+-				       TCPOLEN_TIMESTAMP);
++			net_hdr_word(ptr++) =
++				htonl((TCPOPT_NOP << 24) |
++				      (TCPOPT_NOP << 16) |
++				      (TCPOPT_TIMESTAMP << 8) |
++				      TCPOLEN_TIMESTAMP);
+ 		}
+-		*ptr++ = htonl(opts->tsval);
+-		*ptr++ = htonl(opts->tsecr);
++		net_hdr_word(ptr++) = htonl(opts->tsval);
++		net_hdr_word(ptr++) = htonl(opts->tsecr);
+ 	}
+ 
+ 	if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+-		*ptr++ = htonl((TCPOPT_NOP << 24) |
+-			       (TCPOPT_NOP << 16) |
+-			       (TCPOPT_SACK_PERM << 8) |
+-			       TCPOLEN_SACK_PERM);
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_NOP << 24) |
++			      (TCPOPT_NOP << 16) |
++			      (TCPOPT_SACK_PERM << 8) |
++			      TCPOLEN_SACK_PERM);
+ 	}
+ 
+ 	if (unlikely(OPTION_WSCALE & options)) {
+-		*ptr++ = htonl((TCPOPT_NOP << 24) |
+-			       (TCPOPT_WINDOW << 16) |
+-			       (TCPOLEN_WINDOW << 8) |
+-			       opts->ws);
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_NOP << 24) |
++			      (TCPOPT_WINDOW << 16) |
++			      (TCPOLEN_WINDOW << 8) |
++			      opts->ws);
+ 	}
+ 
+ 	if (unlikely(opts->num_sack_blocks)) {
+@@ -501,16 +506,17 @@
+ 			tp->duplicate_sack : tp->selective_acks;
+ 		int this_sack;
+ 
+-		*ptr++ = htonl((TCPOPT_NOP  << 24) |
+-			       (TCPOPT_NOP  << 16) |
+-			       (TCPOPT_SACK <<  8) |
+-			       (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
++		net_hdr_word(ptr++) =
++			htonl((TCPOPT_NOP << 24) |
++			      (TCPOPT_NOP << 16) |
++			      (TCPOPT_SACK << 8) |
++			      (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
+ 						     TCPOLEN_SACK_PERBLOCK)));
+ 
+ 		for (this_sack = 0; this_sack < opts->num_sack_blocks;
+ 		     ++this_sack) {
+-			*ptr++ = htonl(sp[this_sack].start_seq);
+-			*ptr++ = htonl(sp[this_sack].end_seq);
++			net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
++			net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
+ 		}
+ 
+ 		tp->rx_opt.dsack = 0;
+@@ -523,13 +529,14 @@
+ 
+ 		if (foc->exp) {
+ 			len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
+-			*ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
++			net_hdr_word(ptr) =
++				htonl((TCPOPT_EXP << 24) | (len << 16) |
+ 				     TCPOPT_FASTOPEN_MAGIC);
+ 			p += TCPOLEN_EXP_FASTOPEN_BASE;
+ 		} else {
+ 			len = TCPOLEN_FASTOPEN_BASE + foc->len;
+-			*p++ = TCPOPT_FASTOPEN;
+-			*p++ = len;
++			net_hdr_word(p++) = TCPOPT_FASTOPEN;
++			net_hdr_word(p++) = len;
+ 		}
+ 
+ 		memcpy(p, foc->val, foc->len);
+diff -Nur linux-4.1.13.orig/net/ipv6/datagram.c linux-4.1.13/net/ipv6/datagram.c
+--- linux-4.1.13.orig/net/ipv6/datagram.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv6/datagram.c	2015-12-04 19:57:05.921977444 +0100
+@@ -424,7 +424,7 @@
+ 				ipv6_iface_scope_id(&sin->sin6_addr,
+ 						    IP6CB(skb)->iif);
+ 		} else {
+-			ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
++			ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
+ 					       &sin->sin6_addr);
+ 			sin->sin6_scope_id = 0;
+ 		}
+@@ -761,12 +761,12 @@
+ 			}
+ 
+ 			if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
+-				if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
++				if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
+ 					err = -EINVAL;
+ 					goto exit_f;
+ 				}
+ 			}
+-			fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
++			fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
+ 			break;
+ 
+ 		case IPV6_2292HOPOPTS:
+diff -Nur linux-4.1.13.orig/net/ipv6/exthdrs.c linux-4.1.13/net/ipv6/exthdrs.c
+--- linux-4.1.13.orig/net/ipv6/exthdrs.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv6/exthdrs.c	2015-12-04 19:57:05.921977444 +0100
+@@ -573,7 +573,7 @@
+ 		goto drop;
+ 	}
+ 
+-	pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
++	pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
+ 	if (pkt_len <= IPV6_MAXPLEN) {
+ 		IP6_INC_STATS_BH(net, ipv6_skb_idev(skb),
+ 				 IPSTATS_MIB_INHDRERRORS);
+diff -Nur linux-4.1.13.orig/net/ipv6/ip6_fib.c linux-4.1.13/net/ipv6/ip6_fib.c
+--- linux-4.1.13.orig/net/ipv6/ip6_fib.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv6/ip6_fib.c	2015-12-04 19:57:05.929976920 +0100
+@@ -137,7 +137,7 @@
+ 	 * See include/asm-generic/bitops/le.h.
+ 	 */
+ 	return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
+-	       addr[fn_bit >> 5];
++	       net_hdr_word(&addr[fn_bit >> 5]);
+ }
+ 
+ static struct fib6_node *node_alloc(void)
+diff -Nur linux-4.1.13.orig/net/ipv6/ip6_gre.c linux-4.1.13/net/ipv6/ip6_gre.c
+--- linux-4.1.13.orig/net/ipv6/ip6_gre.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv6/ip6_gre.c	2015-12-04 19:57:05.921977444 +0100
+@@ -394,7 +394,7 @@
+ 
+ 	t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
+ 				flags & GRE_KEY ?
+-				*(((__be32 *)p) + (grehlen / 4) - 1) : 0,
++				net_hdr_word(((__be32 *)p) + (grehlen / 4) - 1) : 0,
+ 				p[1]);
+ 	if (!t)
+ 		return;
+@@ -476,11 +476,11 @@
+ 			offset += 4;
+ 		}
+ 		if (flags&GRE_KEY) {
+-			key = *(__be32 *)(h + offset);
++			key = net_hdr_word(h + offset);
+ 			offset += 4;
+ 		}
+ 		if (flags&GRE_SEQ) {
+-			seqno = ntohl(*(__be32 *)(h + offset));
++			seqno = ntohl(net_hdr_word(h + offset));
+ 			offset += 4;
+ 		}
+ 	}
+@@ -745,7 +745,7 @@
+ 
+ 		if (tunnel->parms.o_flags&GRE_SEQ) {
+ 			++tunnel->o_seqno;
+-			*ptr = htonl(tunnel->o_seqno);
++			net_hdr_word(ptr) = htonl(tunnel->o_seqno);
+ 			ptr--;
+ 		}
+ 		if (tunnel->parms.o_flags&GRE_KEY) {
+@@ -841,7 +841,7 @@
+ 
+ 	dsfield = ipv6_get_dsfield(ipv6h);
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
+-		fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK);
++		fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK;
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
+ 		fl6.flowlabel |= ip6_flowlabel(ipv6h);
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
+diff -Nur linux-4.1.13.orig/net/ipv6/ip6_offload.c linux-4.1.13/net/ipv6/ip6_offload.c
+--- linux-4.1.13.orig/net/ipv6/ip6_offload.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv6/ip6_offload.c	2015-12-04 19:57:05.929976920 +0100
+@@ -221,7 +221,7 @@
+ 			continue;
+ 
+ 		iph2 = (struct ipv6hdr *)(p->data + off);
+-		first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
++		first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
+ 
+ 		/* All fields must match except length and Traffic Class.
+ 		 * XXX skbs on the gro_list have all been parsed and pulled
+diff -Nur linux-4.1.13.orig/net/ipv6/ip6_tunnel.c linux-4.1.13/net/ipv6/ip6_tunnel.c
+--- linux-4.1.13.orig/net/ipv6/ip6_tunnel.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv6/ip6_tunnel.c	2015-12-04 19:57:05.921977444 +0100
+@@ -1190,7 +1190,7 @@
+ 
+ 	dsfield = ipv6_get_dsfield(ipv6h);
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
+-		fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK);
++		fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK;
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
+ 		fl6.flowlabel |= ip6_flowlabel(ipv6h);
+ 	if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
+diff -Nur linux-4.1.13.orig/net/ipv6/netfilter/nf_log_ipv6.c linux-4.1.13/net/ipv6/netfilter/nf_log_ipv6.c
+--- linux-4.1.13.orig/net/ipv6/netfilter/nf_log_ipv6.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv6/netfilter/nf_log_ipv6.c	2015-12-04 19:57:05.933976659 +0100
+@@ -66,9 +66,9 @@
+ 	/* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
+ 	nf_log_buf_add(m, "LEN=%Zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
+ 	       ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
+-	       (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
++	       (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
+ 	       ih->hop_limit,
+-	       (ntohl(*(__be32 *)ih) & 0x000fffff));
++	       (ntohl(net_hdr_word(ih)) & 0x000fffff));
+ 
+ 	fragment = 0;
+ 	ptr = ip6hoff + sizeof(struct ipv6hdr);
+diff -Nur linux-4.1.13.orig/net/ipv6/tcp_ipv6.c linux-4.1.13/net/ipv6/tcp_ipv6.c
+--- linux-4.1.13.orig/net/ipv6/tcp_ipv6.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/ipv6/tcp_ipv6.c	2015-12-04 19:57:05.917977705 +0100
+@@ -39,6 +39,7 @@
+ #include <linux/ipsec.h>
+ #include <linux/times.h>
+ #include <linux/slab.h>
++#include <asm/unaligned.h>
+ #include <linux/uaccess.h>
+ #include <linux/ipv6.h>
+ #include <linux/icmpv6.h>
+@@ -772,10 +773,10 @@
+ 	topt = (__be32 *)(t1 + 1);
+ 
+ 	if (tsecr) {
+-		*topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+-				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
+-		*topt++ = htonl(tsval);
+-		*topt++ = htonl(tsecr);
++		put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++				(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
++		put_unaligned_be32(tsval, topt++);
++		put_unaligned_be32(tsecr, topt++);
+ 	}
+ 
+ #ifdef CONFIG_TCP_MD5SIG
+diff -Nur linux-4.1.13.orig/net/netfilter/nf_conntrack_proto_tcp.c linux-4.1.13/net/netfilter/nf_conntrack_proto_tcp.c
+--- linux-4.1.13.orig/net/netfilter/nf_conntrack_proto_tcp.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/netfilter/nf_conntrack_proto_tcp.c	2015-12-04 19:57:05.929976920 +0100
+@@ -453,7 +453,7 @@
+ 
+ 	/* Fast path for timestamp-only option */
+ 	if (length == TCPOLEN_TSTAMP_ALIGNED
+-	    && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
++	    && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
+ 				       | (TCPOPT_NOP << 16)
+ 				       | (TCPOPT_TIMESTAMP << 8)
+ 				       | TCPOLEN_TIMESTAMP))
+diff -Nur linux-4.1.13.orig/net/sched/cls_u32.c linux-4.1.13/net/sched/cls_u32.c
+--- linux-4.1.13.orig/net/sched/cls_u32.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/sched/cls_u32.c	2015-12-04 19:57:05.929976920 +0100
+@@ -151,7 +151,7 @@
+ 			data = skb_header_pointer(skb, toff, 4, &hdata);
+ 			if (!data)
+ 				goto out;
+-			if ((*data ^ key->val) & key->mask) {
++			if ((net_hdr_word(data) ^ key->val) & key->mask) {
+ 				n = rcu_dereference_bh(n->next);
+ 				goto next_knode;
+ 			}
+@@ -204,8 +204,8 @@
+ 						  &hdata);
+ 			if (!data)
+ 				goto out;
+-			sel = ht->divisor & u32_hash_fold(*data, &n->sel,
+-							  n->fshift);
++			sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
++							  &n->sel, n->fshift);
+ 		}
+ 		if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
+ 			goto next_ht;
+diff -Nur linux-4.1.13.orig/net/xfrm/xfrm_input.c linux-4.1.13/net/xfrm/xfrm_input.c
+--- linux-4.1.13.orig/net/xfrm/xfrm_input.c	2015-11-09 23:34:10.000000000 +0100
++++ linux-4.1.13/net/xfrm/xfrm_input.c	2015-12-04 19:57:05.929976920 +0100
+@@ -154,8 +154,8 @@
+ 	if (!pskb_may_pull(skb, hlen))
+ 		return -EINVAL;
+ 
+-	*spi = *(__be32 *)(skb_transport_header(skb) + offset);
+-	*seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
++	*spi = net_hdr_word(skb_transport_header(skb) + offset);
++	*seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
+ 	return 0;
+ }
+