diff options
| author | Waldemar Brodkorb <wbx@openadk.org> | 2010-11-26 15:18:01 +0100 |
|---|---|---|
| committer | Waldemar Brodkorb <wbx@openadk.org> | 2010-11-26 15:18:01 +0100 |
| commit | dbfdeaeb46453d300b975dcfb6790f3b16f9e6b5 (patch) | |
| tree | fbba8492efcb3536c1606a659308e9f0ca75ea20 /target/lemote | |
| parent | 4969392a108205efe43203a9df4a20c749554479 (diff) | |
implement the concept of target choice by embedded system or architecture
you can now choose between specific embedded systems like PC Engines
ALIX boards, Foxboard, .. or between generic architecture support like
x86, x86_64, mips, ...
This does reduce the overhead of duplicate configuration files in target
directory. Now qemu, toolchain and ibm x40 support is combined in one target
directory target/x86. Distinguishing between hardware profiles happens
via menu based configuration. (CPU choice for kernel, CFLAGS for package
building, ..). We will see if this is the right direction.
Diffstat (limited to 'target/lemote')
| -rw-r--r-- | target/lemote/Makefile | 73 | ||||
| -rw-r--r-- | target/lemote/files/boot/boot.cfg | 7 | ||||
| -rw-r--r-- | target/lemote/files/etc/inittab | 9 | ||||
| -rw-r--r-- | target/lemote/files/etc/mdev.conf | 17 | ||||
| -rw-r--r-- | target/lemote/files/etc/network/interfaces | 13 | ||||
| -rw-r--r-- | target/lemote/files/etc/tmpfs | 1 | ||||
| -rw-r--r-- | target/lemote/kernel.config | 1408 | ||||
| -rw-r--r-- | target/lemote/patches/lemote.patch | 4267 | ||||
| -rw-r--r-- | target/lemote/target.mk | 5 | ||||
| -rw-r--r-- | target/lemote/uclibc.config | 232 | ||||
| -rw-r--r-- | target/lemote/xorg.conf | 53 |
11 files changed, 0 insertions, 6085 deletions
diff --git a/target/lemote/Makefile b/target/lemote/Makefile deleted file mode 100644 index aa6006f24..000000000 --- a/target/lemote/Makefile +++ /dev/null @@ -1,73 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -include $(TOPDIR)/rules.mk -include $(TOPDIR)/mk/kernel.mk -include $(TOPDIR)/mk/modules.mk -include $(TOPDIR)/mk/kernel-build.mk -include $(TOPDIR)/mk/image.mk - -KERNEL:=$(LINUX_DIR)/vmlinuz - -createinitcrypt: - $(SED) 's#^CONFIG_INITRAMFS_SOURCE.*#CONFIG_INITRAMFS_SOURCE="./initramfs_list"#' $(LINUX_DIR)/.config - echo 'CONFIG_INITRAMFS_ROOT_UID=0' >> $(LINUX_DIR)/.config - echo 'CONFIG_INITRAMFS_ROOT_GID=0' >> $(LINUX_DIR)/.config - echo N |$(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE="$(TARGET_CROSS)" ARCH=$(ARCH) \ - CC="$(TARGET_CC)" oldconfig $(MAKE_TRACE) - $(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE="$(TARGET_CROSS)" ARCH=$(ARCH) \ - CC="$(TARGET_CC)" $(MAKE_TRACE) - @cp $(KERNEL) $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel - -ifeq ($(FS),nfsroot) -imageinstall: $(BIN_DIR)/$(ROOTFSUSERTARBALL) - @cp $(KERNEL) $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel - @echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel' - @echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}' - @echo 'Boot your lemote and type following commands in PMON:' - @echo 'PMON> ifaddr rtl0 <ip-address-client>' - @echo 'PMON> load tftp://<ip-address-server>/${ADK_TARGET}-${FS}-kernel' - @echo 'PMON> g' -endif -ifeq ($(FS),initramfs) -imageinstall: $(BIN_DIR)/$(INITRAMFS) - @cp $(KERNEL) $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel - @echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel' - @echo 'The initramfs image is: ${BIN_DIR}/${INITRAMFS}' -endif -ifeq ($(FS),initramfs-piggyback) -imageinstall: $(BUILD_DIR)/$(INITRAMFS_PIGGYBACK) createinitramfs - @cp $(KERNEL) $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel - @echo 'The kernel+initramfs file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel' -endif -ifeq ($(FS),archive) -imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL) - @echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSTARBALL)" -endif -ifeq ($(FS),encrypted) -imageinstall: $(BIN_DIR)/$(ROOTFSUSERTARBALL) createinitcrypt - @echo 'The kernel+cryptinit file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel' - @echo "The RootFS tarball is: $(BIN_DIR)/$(ROOTFSUSERTARBALL)" - @echo 'Boot your lemote via NFS or USB.' - @echo 'Then create at least three partitions with fdisk:' - @echo '/dev/sda1 (ext2)' - @echo '/dev/sda2 (encrypted root)' - @echo '/dev/sda3 (swap)' - @echo 'mkdir /mnt/{boot,root}' - @echo 'mke2fs /dev/sda1' - @echo 'cryptsetup luksFormat /dev/sda2' - @echo 'cryptsetup luksFormat /dev/sda3' - @echo 'cryptsetup luksOpen /dev/sda2 root' - @echo 'cryptsetup luksOpen /dev/sda3 swap' - @echo 'mkfs.xfs /dev/mapper/root' - @echo 'mkswap /dev/mapper/swap' - @echo 'mount /dev/sda1 /mnt/boot' - @echo 'mount /dev/mapper/crypt /mnt/root' - @echo 'mkdir /mnt/boot/boot' - @echo 'Copy $(ROOTFSUSERTARBALL) via scp to /mnt/root and extract it' - @echo 'cd /mnt/root ; gunzip $(ROOTFSUSERTARBALL); tar xpvf $(ROOTFSUSERTARBALL)' - @echo 'Copy ${ADK_TARGET}-${FS}-kernel via scp to /mnt/boot/boot' - @echo 'Move boot.cfg to /mnt/boot/boot' - @echo 'mv /mnt/root/boot/boot.cfg /mnt/boot/boot' - @echo 'cd /mnt/root ; mknod -m 644 console c 5 1' -endif diff --git a/target/lemote/files/boot/boot.cfg b/target/lemote/files/boot/boot.cfg deleted file mode 100644 index dd386032b..000000000 --- a/target/lemote/files/boot/boot.cfg +++ /dev/null @@ -1,7 +0,0 @@ -timeout 3 -default 0 -showmenu 1 - -title Linux - kernel /dev/fs/ext2@wd0/boot/vmlinuz-adk - args no_auto_cmd diff --git a/target/lemote/files/etc/inittab b/target/lemote/files/etc/inittab deleted file mode 100644 index cedbc93ff..000000000 --- a/target/lemote/files/etc/inittab +++ /dev/null @@ -1,9 +0,0 @@ -::sysinit:/etc/init.d/rcS -::shutdown:/etc/init.d/rcK -tty1::respawn:/sbin/getty -i -L tty1 115200 vt100 -tty2::respawn:/sbin/getty -i -L tty2 115200 vt100 -tty3::respawn:/sbin/getty -i -L tty3 115200 vt100 -tty4::respawn:/sbin/getty -i -L tty4 115200 vt100 -tty5::respawn:/sbin/getty -i -L tty5 115200 vt100 -tty6::respawn:/sbin/getty -i -L tty6 115200 vt100 -tty11::respawn:/sbin/logread -f diff --git a/target/lemote/files/etc/mdev.conf b/target/lemote/files/etc/mdev.conf deleted file mode 100644 index 25d02acd5..000000000 --- a/target/lemote/files/etc/mdev.conf +++ /dev/null @@ -1,17 +0,0 @@ -device-mapper 0:0 660 @mkdir /dev/mapper -tun 0:0 660 >net/tun -null 0:0 777 -zero 0:0 666 -u?random 0:0 644 -console 0:0 0600 -ptmx 0:0 666 -tty 0:0 666 -ttyS* 0:0 640 -audio root:audio 660 >snd/audio -dsp root:audio 660 >snd/dsp -timer root:audio 660 >snd/timer -controlC0 root:audio 660 >snd/controlC0 -pcmC0D0c root:audio 660 >snd/pcmC0D0c -pcmC0D0p root:audio 660 >snd/pcmC0D0p -video0 root:video 660 -.* 0:0 644 @/lib/mdev/init diff --git a/target/lemote/files/etc/network/interfaces b/target/lemote/files/etc/network/interfaces deleted file mode 100644 index 3abd272d8..000000000 --- a/target/lemote/files/etc/network/interfaces +++ /dev/null @@ -1,13 +0,0 @@ -auto lo -iface lo inet loopback - -# wlan example -#auto wlan0 -#iface wlan0 inet dhcp -# wireless-extension 1 -# wireless-mode sta -# wireless-channel 1 -# wireless-ssid openadk -# wireless-security wpa2 -# wireless-passphrase openadk123 - diff --git a/target/lemote/files/etc/tmpfs b/target/lemote/files/etc/tmpfs deleted file mode 100644 index 08558e471..000000000 --- a/target/lemote/files/etc/tmpfs +++ /dev/null @@ -1 +0,0 @@ -16384 diff --git a/target/lemote/kernel.config b/target/lemote/kernel.config deleted file mode 100644 index b3bbfbf05..000000000 --- a/target/lemote/kernel.config +++ /dev/null @@ -1,1408 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.35.7 -# Sat Oct 16 10:47:40 2010 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_AR7 is not set -# CONFIG_BCM47XX is not set -# CONFIG_BCM63XX is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -CONFIG_MACH_LOONGSON=y -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_NEC_MARKEINS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_POWERTV is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SNI_RM is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MIKROTIK_RB532 is not set -# CONFIG_WR_PPMC is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -# CONFIG_ALCHEMY_GPIO_INDIRECT is not set -CONFIG_ARCH_SPARSEMEM_ENABLE=y -# CONFIG_LEMOTE_FULOONG2E is not set -CONFIG_LEMOTE_MACH2F=y -CONFIG_CS5536=y -CONFIG_CS5536_MFGPT=y -CONFIG_LOONGSON_SUSPEND=y -CONFIG_LOONGSON_UART_BASE=y -CONFIG_LOONGSON_MC146818=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_I8259=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y -CONFIG_GENERIC_GPIO=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_BOOT_ELF32=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_LOONGSON2E is not set -CONFIG_CPU_LOONGSON2F=y -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_CPU_NOP_WORKAROUNDS=y -CONFIG_CPU_JUMP_WORKAROUNDS=y -CONFIG_CPU_LOONGSON2F_WORKAROUNDS=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y -CONFIG_CPU_LOONGSON2=y -CONFIG_SYS_HAS_CPU_LOONGSON2F=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_CPUFREQ=y -CONFIG_CPU_SUPPORTS_ADDRWINCFG=y -CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED=y - -# -# Kernel type -# -# CONFIG_32BIT is not set -CONFIG_64BIT=y -# CONFIG_PAGE_SIZE_4KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -CONFIG_PAGE_SIZE_16KB=y -# CONFIG_PAGE_SIZE_32KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_CPU_HAS_WB=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -# CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_STATIC=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -# CONFIG_KSM is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=250 -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -# CONFIG_SECCOMP is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -CONFIG_CONSTRUCTORS=y - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_CROSS_COMPILE="" -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_BZIP2 is not set -CONFIG_KERNEL_LZMA=y -# CONFIG_KERNEL_LZO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_TREE_PREEMPT_RCU is not set -# CONFIG_TINY_RCU is not set -# CONFIG_RCU_TRACE is not set -CONFIG_RCU_FANOUT=64 -# CONFIG_RCU_FANOUT_EXACT is not set -# CONFIG_TREE_RCU_TRACE is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -# CONFIG_BUG is not set -CONFIG_ELF_CORE=y -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_BASE_FULL is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y - -# -# Kernel Performance Events And Counters -# -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_PCI_QUIRKS=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_SYSCALL_WRAPPERS=y - -# -# GCOV-based kernel profiling -# -# CONFIG_SLOW_WORK is not set -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=1 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set -CONFIG_BLOCK_COMPAT=y - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_INLINE_SPIN_TRYLOCK is not set -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK is not set -# CONFIG_INLINE_SPIN_LOCK_BH is not set -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set -CONFIG_INLINE_SPIN_UNLOCK=y -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_READ_TRYLOCK is not set -# CONFIG_INLINE_READ_LOCK is not set -# CONFIG_INLINE_READ_LOCK_BH is not set -# CONFIG_INLINE_READ_LOCK_IRQ is not set -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set -CONFIG_INLINE_READ_UNLOCK=y -# CONFIG_INLINE_READ_UNLOCK_BH is not set -CONFIG_INLINE_READ_UNLOCK_IRQ=y -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set -# CONFIG_INLINE_WRITE_TRYLOCK is not set -# CONFIG_INLINE_WRITE_LOCK is not set -# CONFIG_INLINE_WRITE_LOCK_BH is not set -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set -CONFIG_INLINE_WRITE_UNLOCK=y -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set -# CONFIG_MUTEX_SPIN_ON_OWNER is not set -CONFIG_FREEZER=y - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCI_IOV is not set -CONFIG_ISA=y -CONFIG_MMU=y -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set -CONFIG_MIPS32_COMPAT=y -CONFIG_COMPAT=y -CONFIG_SYSVIPC_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_BINFMT_ELF32=y - -# -# Power management options -# -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_NVS=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="/dev/sda3" -# CONFIG_PM_RUNTIME is not set -CONFIG_PM_OPS=y -CONFIG_MIPS_EXTERNAL_TIMER=y -CONFIG_MIPS_CPUFREQ=y - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y - -# -# CPUFreq processor drivers -# -CONFIG_LOONGSON2_CPUFREQ=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_LRO=y -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_RDS is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_L2TP is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_PHONET is not set -# CONFIG_IEEE802154 is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -# CONFIG_LIB80211 is not set - -# -# CFG80211 needs to be enabled for MAC80211 -# - -# -# Some wireless drivers require a rate control algorithm -# -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set -# CONFIG_CAIF is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -# CONFIG_PARPORT is not set -CONFIG_PNP=y -# CONFIG_PNP_DEBUG_MESSAGES is not set - -# -# Protocols -# -CONFIG_ISAPNP=y -# CONFIG_PNPACPI is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set - -# -# DRBD disabled because PROC_FS, INET or CONNECTOR not selected -# -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_SCSI_DH is not set -# CONFIG_SCSI_OSD_INITIATOR is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -# CONFIG_ATA_VERBOSE_ERROR is not set -# CONFIG_SATA_PMP is not set - -# -# Controllers with non-SFF native interface -# -# CONFIG_SATA_AHCI is not set -# CONFIG_SATA_AHCI_PLATFORM is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_SIL24 is not set -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_SX4 is not set -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_SVW is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set - -# -# PATA SFF controllers with BMDMA -# -# CONFIG_PATA_ALI is not set -CONFIG_PATA_AMD=y -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_ATP867X is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RDC is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SCH is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_TOSHIBA is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set - -# -# PIO-only SFF controllers -# -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_ISAPNP is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_QDI is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_WINBOND_VLB is not set - -# -# Generic fallback / legacy drivers -# -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_LEGACY is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# You can enable one or both FireWire driver stacks. -# - -# -# The newer stack is recommended. -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_NET_SB1000 is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_ETHOC is not set -# CONFIG_SMSC911X is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_DNET is not set -# CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_KSZ884X_PCI is not set -# CONFIG_APRICOT is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_TC35815 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set -CONFIG_8139TOO_TUNE_TWISTER=y -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_R6040 is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SMSC9420 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_KS8842 is not set -# CONFIG_KS8851_MLL is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -# CONFIG_ATL2 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set -CONFIG_WLAN=y -# CONFIG_ATMEL is not set -# CONFIG_PRISM54 is not set -# CONFIG_HOSTAP is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_VMXNET3 is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set -CONFIG_INPUT_SPARSEKMAP=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_GPIO is not set -# CONFIG_KEYBOARD_MATRIX is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_OPENCORES is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_PS2_ALPS is not set -# CONFIG_MOUSE_PS2_LOGIPS2PP is not set -CONFIG_MOUSE_PS2_SYNAPTICS=y -# CONFIG_MOUSE_PS2_TRACKPOINT is not set -# CONFIG_MOUSE_PS2_ELANTECH is not set -# CONFIG_MOUSE_PS2_SENTELIC is not set -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_ALTERA_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_N_GSM is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -# CONFIG_SERIAL_8250_PCI is not set -# CONFIG_SERIAL_8250_PNP is not set -CONFIG_SERIAL_8250_NR_UARTS=16 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_TIMBERDALE is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -# CONFIG_RAMOOPS is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set - -# -# PPS support -# -# CONFIG_PPS is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set - -# -# Memory mapped GPIO expanders: -# -# CONFIG_GPIO_IT8761E is not set -# CONFIG_GPIO_SCH is not set - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# -# CONFIG_GPIO_CS5535 is not set -# CONFIG_GPIO_BT8XX is not set -# CONFIG_GPIO_LANGWELL is not set -# CONFIG_GPIO_RDC321X is not set - -# -# SPI GPIO expanders: -# - -# -# AC97 GPIO expanders: -# - -# -# MODULbus GPIO expanders: -# -# CONFIG_W1 is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_TEST_POWER is not set -# CONFIG_BATTERY_DS2760 is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SHT15 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_THERMAL is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set -# CONFIG_MFD_SUPPORT is not set -# CONFIG_REGULATOR is not set -# CONFIG_MEDIA_SUPPORT is not set - -# -# Graphics support -# -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_VIA is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CARMINE is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MB862XX is not set -# CONFIG_FB_BROADSHEET is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set - -# -# Display device support -# -CONFIG_DISPLAY_SUPPORT=y - -# -# Display hardware drivers -# - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_UWB is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_UNSAFE_RESUME is not set - -# -# MMC/SD/SDIO Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_TIFM_SD is not set -# CONFIG_MMC_CB710 is not set -# CONFIG_MMC_VIA_SDMMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set -CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set -# CONFIG_ECHO is not set -# CONFIG_COMEDI is not set -# CONFIG_R8187SE is not set -# CONFIG_RTL8192E is not set -# CONFIG_POHMELFS is not set -# CONFIG_IDE_PHISON is not set -# CONFIG_VT6655 is not set -# CONFIG_VME_BUS is not set - -# -# RAR Register Driver -# -# CONFIG_RAR_REGISTER is not set -# CONFIG_IIO is not set -# CONFIG_RAMZSWAP is not set -# CONFIG_BATMAN_ADV is not set -CONFIG_FB_SM7XX=y -# CONFIG_DT3155 is not set -# CONFIG_CRYSTALHD is not set - -# -# Texas Instruments shared transport line discipline -# -# CONFIG_FB_XGI is not set -CONFIG_MIPS_PLATFORM_DEVICES=y -CONFIG_LEMOTE_YEELOONG2F=y -# CONFIG_LEMOTE_LYNLOONG2F is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -# CONFIG_NILFS2_FS is not set -# CONFIG_AUFS_FS is not set -CONFIG_FILE_LOCKING=y -# CONFIG_FSNOTIFY is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_INOTIFY_USER is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CEPH_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -CONFIG_MAGIC_SYSRQ=y -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_TRACING_SUPPORT=y -# CONFIG_FTRACE is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_EARLY_PRINTK=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=tty0 init=/init no_auto_cmd" -# CONFIG_CMDLINE_OVERRIDE is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_SMACK is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_VMAC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set - -# -# OCF Configuration -# -# CONFIG_OCF_OCF is not set -# CONFIG_BINARY_PRINTF is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_NLATTR=y diff --git a/target/lemote/patches/lemote.patch b/target/lemote/patches/lemote.patch deleted file mode 100644 index dce900900..000000000 --- a/target/lemote/patches/lemote.patch +++ /dev/null @@ -1,4267 +0,0 @@ -diff -Nur linux-2.6.36.orig/arch/mips/Kconfig linux-2.6.36/arch/mips/Kconfig ---- linux-2.6.36.orig/arch/mips/Kconfig 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/Kconfig 2010-11-18 11:47:59.000000000 +0100 -@@ -205,7 +205,7 @@ - - config MACH_LOONGSON - bool "Loongson family of machines" -- select SYS_SUPPORTS_ZBOOT -+ select SYS_SUPPORTS_ZBOOT_UART16550 - help - This enables the support of Loongson family of machines. - -@@ -1093,6 +1093,8 @@ - bool "Loongson 2E" - depends on SYS_HAS_CPU_LOONGSON2E - select CPU_LOONGSON2 -+ select GENERIC_GPIO -+ select ARCH_REQUIRE_GPIOLIB - help - The Loongson 2E processor implements the MIPS III instruction set - with many extensions. -@@ -2012,6 +2014,18 @@ - source "kernel/time/Kconfig" - - # -+# High Resolution sched_clock() Configuration -+# -+ -+config CPU_HAS_FIXED_C0_COUNT -+ bool -+ -+config CPU_SUPPORTS_HR_SCHED_CLOCK -+ bool -+ depends on CPU_HAS_FIXED_C0_COUNT || !CPU_FREQ -+ default y -+ -+# - # Timer Interrupt Frequency Configuration - # - -diff -Nur linux-2.6.36.orig/arch/mips/include/asm/dma-mapping.h linux-2.6.36/arch/mips/include/asm/dma-mapping.h ---- linux-2.6.36.orig/arch/mips/include/asm/dma-mapping.h 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/include/asm/dma-mapping.h 2010-11-18 11:47:59.000000000 +0100 -@@ -65,4 +65,8 @@ - extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction); - -+#define ARCH_HAS_DMA_MMAP_COHERENT -+extern int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma, -+ void *cpu_addr, dma_addr_t handle, size_t size); -+ - #endif /* _ASM_DMA_MAPPING_H */ -diff -Nur linux-2.6.36.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h linux-2.6.36/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h ---- linux-2.6.36.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h 2010-11-18 11:47:59.000000000 +0100 -@@ -255,21 +255,12 @@ - * IDE STANDARD - */ - #define IDE_CAP 0x00 --#define IDE_CONFIG 0x01 --#define IDE_SMI 0x02 --#define IDE_ERROR 0x03 --#define IDE_PM 0x04 --#define IDE_DIAG 0x05 -- --/* -- * IDE SPEC. -- */ - #define IDE_IO_BAR 0x08 - #define IDE_CFG 0x10 - #define IDE_DTC 0x12 - #define IDE_CAST 0x13 - #define IDE_ETC 0x14 --#define IDE_INTERNAL_PM 0x15 -+#define IDE_PM 0x15 - - /* - * ACC STANDARD -@@ -301,5 +292,40 @@ - /* GPIO : I/O SPACE; REG : 32BITS */ - #define GPIOL_OUT_VAL 0x00 - #define GPIOL_OUT_EN 0x04 -+#define GPIOL_OUT_AUX1_SEL 0x10 -+/* SMB : I/O SPACE, REG : 8BITS WIDTH */ -+#define SMB_SDA 0x00 -+#define SMB_STS 0x01 -+#define SMB_STS_SLVSTP (1 << 7) -+#define SMB_STS_SDAST (1 << 6) -+#define SMB_STS_BER (1 << 5) -+#define SMB_STS_NEGACK (1 << 4) -+#define SMB_STS_STASTR (1 << 3) -+#define SMB_STS_NMATCH (1 << 2) -+#define SMB_STS_MASTER (1 << 1) -+#define SMB_STS_XMIT (1 << 0) -+#define SMB_CTRL_STS 0x02 -+#define SMB_CSTS_TGSTL (1 << 5) -+#define SMB_CSTS_TSDA (1 << 4) -+#define SMB_CSTS_GCMTCH (1 << 3) -+#define SMB_CSTS_MATCH (1 << 2) -+#define SMB_CSTS_BB (1 << 1) -+#define SMB_CSTS_BUSY (1 << 0) -+#define SMB_CTRL1 0x03 -+#define SMB_CTRL1_STASTRE (1 << 7) -+#define SMB_CTRL1_NMINTE (1 << 6) -+#define SMB_CTRL1_GCMEN (1 << 5) -+#define SMB_CTRL1_ACK (1 << 4) -+#define SMB_CTRL1_RSVD (1 << 3) -+#define SMB_CTRL1_INTEN (1 << 2) -+#define SMB_CTRL1_STOP (1 << 1) -+#define SMB_CTRL1_START (1 << 0) -+#define SMB_ADDR 0x04 -+#define SMB_ADDR_SAEN (1 << 7) -+#define SMB_CONTROLLER_ADDR (0xef << 0) -+#define SMB_CTRL2 0x05 -+#define SMB_FREQ (0x20 << 1) -+#define SMB_ENABLE (0x01 << 0) -+#define SMB_CTRL3 0x06 - - #endif /* _CS5536_H */ -diff -Nur linux-2.6.36.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h linux-2.6.36/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h ---- linux-2.6.36.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h 2010-11-18 11:47:59.000000000 +0100 -@@ -32,4 +32,9 @@ - #define MFGPT0_CNT (MFGPT_BASE + 4) - #define MFGPT0_SETUP (MFGPT_BASE + 6) - -+#define MFGPT2_CMP1 (MFGPT_BASE + 0x10) -+#define MFGPT2_CMP2 (MFGPT_BASE + 0x12) -+#define MFGPT2_CNT (MFGPT_BASE + 0x14) -+#define MFGPT2_SETUP (MFGPT_BASE + 0x16) -+ - #endif /*!_CS5536_MFGPT_H */ -diff -Nur linux-2.6.36.orig/arch/mips/include/asm/mach-loongson/ec_kb3310b.h linux-2.6.36/arch/mips/include/asm/mach-loongson/ec_kb3310b.h ---- linux-2.6.36.orig/arch/mips/include/asm/mach-loongson/ec_kb3310b.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.36/arch/mips/include/asm/mach-loongson/ec_kb3310b.h 2010-11-18 11:47:59.000000000 +0100 -@@ -0,0 +1,191 @@ -+/* -+ * KB3310B Embedded Controller -+ * -+ * Copyright (C) 2008 Lemote Inc. -+ * Author: liujl <liujl@lemote.com>, 2008-03-14 -+ * Copyright (C) 2009 Lemote Inc. -+ * Author: Wu Zhangjin <wuzhangjin@gmail.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef _EC_KB3310B_H -+#define _EC_KB3310B_H -+ -+extern unsigned char ec_read(unsigned short addr); -+extern void ec_write(unsigned short addr, unsigned char val); -+extern int ec_query_seq(unsigned char cmd); -+extern int ec_query_event_num(void); -+extern int ec_get_event_num(void); -+ -+typedef int (*sci_handler) (int status); -+extern sci_handler yeeloong_report_lid_status; -+ -+#define SCI_IRQ_NUM 0x0A -+ -+/* -+ * The following registers are determined by the EC index configuration. -+ * 1, fill the PORT_HIGH as EC register high part. -+ * 2, fill the PORT_LOW as EC register low part. -+ * 3, fill the PORT_DATA as EC register write data or get the data from it. -+ */ -+#define EC_IO_PORT_HIGH 0x0381 -+#define EC_IO_PORT_LOW 0x0382 -+#define EC_IO_PORT_DATA 0x0383 -+ -+/* -+ * EC delay time is 500us for register and status access -+ */ -+#define EC_REG_DELAY 500 /* unit : us */ -+#define EC_CMD_TIMEOUT 0x1000 -+ -+/* -+ * EC access port for SCI communication -+ */ -+#define EC_CMD_PORT 0x66 -+#define EC_STS_PORT 0x66 -+#define EC_DAT_PORT 0x62 -+#define CMD_INIT_IDLE_MODE 0xdd -+#define CMD_EXIT_IDLE_MODE 0xdf -+#define CMD_INIT_RESET_MODE 0xd8 -+#define CMD_REBOOT_SYSTEM 0x8c -+#define CMD_GET_EVENT_NUM 0x84 -+#define CMD_PROGRAM_PIECE 0xda -+ -+/* Temperature & Fan registers */ -+#define REG_TEMPERATURE_VALUE 0xF458 -+#define REG_FAN_AUTO_MAN_SWITCH 0xF459 -+#define BIT_FAN_AUTO 0 -+#define BIT_FAN_MANUAL 1 -+#define REG_FAN_CONTROL 0xF4D2 -+#define BIT_FAN_CONTROL_ON (1 << 0) -+#define BIT_FAN_CONTROL_OFF (0 << 0) -+#define REG_FAN_STATUS 0xF4DA -+#define BIT_FAN_STATUS_ON (1 << 0) -+#define BIT_FAN_STATUS_OFF (0 << 0) -+#define REG_FAN_SPEED_HIGH 0xFE22 -+#define REG_FAN_SPEED_LOW 0xFE23 -+#define REG_FAN_SPEED_LEVEL 0xF4CC -+/* Fan speed divider */ -+#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ -+ -+/* Battery registers */ -+#define REG_BAT_DESIGN_CAP_HIGH 0xF77D -+#define REG_BAT_DESIGN_CAP_LOW 0xF77E -+#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 -+#define REG_BAT_FULLCHG_CAP_LOW 0xF781 -+#define REG_BAT_DESIGN_VOL_HIGH 0xF782 -+#define REG_BAT_DESIGN_VOL_LOW 0xF783 -+#define REG_BAT_CURRENT_HIGH 0xF784 -+#define REG_BAT_CURRENT_LOW 0xF785 -+#define REG_BAT_VOLTAGE_HIGH 0xF786 -+#define REG_BAT_VOLTAGE_LOW 0xF787 -+#define REG_BAT_TEMPERATURE_HIGH 0xF788 -+#define REG_BAT_TEMPERATURE_LOW 0xF789 -+#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 -+#define REG_BAT_RELATIVE_CAP_LOW 0xF493 -+#define REG_BAT_VENDOR 0xF4C4 -+#define FLAG_BAT_VENDOR_SANYO 0x01 -+#define FLAG_BAT_VENDOR_SIMPLO 0x02 -+#define REG_BAT_CELL_COUNT 0xF4C6 -+#define FLAG_BAT_CELL_3S1P 0x03 -+#define FLAG_BAT_CELL_3S2P 0x06 -+#define REG_BAT_CHARGE 0xF4A2 -+#define FLAG_BAT_CHARGE_DISCHARGE 0x01 -+#define FLAG_BAT_CHARGE_CHARGE 0x02 -+#define FLAG_BAT_CHARGE_ACPOWER 0x00 -+#define REG_BAT_STATUS 0xF4B0 -+#define BIT_BAT_STATUS_LOW (1 << 5) -+#define BIT_BAT_STATUS_DESTROY (1 << 2) -+#define BIT_BAT_STATUS_FULL (1 << 1) -+#define BIT_BAT_STATUS_IN (1 << 0) -+#define REG_BAT_CHARGE_STATUS 0xF4B1 -+#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) -+#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) -+#define REG_BAT_STATE 0xF482 -+#define BIT_BAT_STATE_CHARGING (1 << 1) -+#define BIT_BAT_STATE_DISCHARGING (1 << 0) -+#define REG_BAT_POWER 0xF440 -+#define BIT_BAT_POWER_S3 (1 << 2) -+#define BIT_BAT_POWER_ON (1 << 1) -+#define BIT_BAT_POWER_ACIN (1 << 0) -+ -+/* Audio: rd/wr */ -+#define REG_AUDIO_VOLUME 0xF46C -+#define REG_AUDIO_MUTE 0xF4E7 -+#define REG_AUDIO_BEEP 0xF4D0 -+/* USB port power or not: rd/wr */ -+#define REG_USB0_FLAG 0xF461 -+#define REG_USB1_FLAG 0xF462 -+#define REG_USB2_FLAG 0xF463 -+#define BIT_USB_FLAG_ON 1 -+#define BIT_USB_FLAG_OFF 0 -+/* LID */ -+#define REG_LID_DETECT 0xF4BD -+#define BIT_LID_DETECT_ON 1 -+#define BIT_LID_DETECT_OFF 0 -+/* CRT */ -+#define REG_CRT_DETECT 0xF4AD -+#define BIT_CRT_DETECT_PLUG 1 -+#define BIT_CRT_DETECT_UNPLUG 0 -+/* LCD backlight brightness adjust: 9 levels */ -+#define REG_DISPLAY_BRIGHTNESS 0xF4F5 -+/* Black screen Status */ -+#define BIT_DISPLAY_LCD_ON 1 -+#define BIT_DISPLAY_LCD_OFF 0 -+/* LCD backlight control: off/restore */ -+#define REG_BACKLIGHT_CTRL 0xF7BD -+#define BIT_BACKLIGHT_ON 1 -+#define BIT_BACKLIGHT_OFF 0 -+/* Reset the machine auto-clear: rd/wr */ -+#define REG_RESET 0xF4EC -+#define BIT_RESET_ON 1 -+/* Light the led: rd/wr */ -+#define REG_LED 0xF4C8 -+#define BIT_LED_RED_POWER (1 << 0) -+#define BIT_LED_ORANGE_POWER (1 << 1) -+#define BIT_LED_GREEN_CHARGE (1 << 2) -+#define BIT_LED_RED_CHARGE (1 << 3) -+#define BIT_LED_NUMLOCK (1 << 4) -+/* Test led mode, all led on/off */ -+#define REG_LED_TEST 0xF4C2 -+#define BIT_LED_TEST_IN 1 -+#define BIT_LED_TEST_OUT 0 -+/* Camera on/off */ -+#define REG_CAMERA_STATUS 0xF46A -+#define BIT_CAMERA_STATUS_ON 1 -+#define BIT_CAMERA_STATUS_OFF 0 -+#define REG_CAMERA_CONTROL 0xF7B7 -+#define BIT_CAMERA_CONTROL_OFF 0 -+#define BIT_CAMERA_CONTROL_ON 1 -+/* Wlan Status */ -+#define REG_WLAN 0xF4FA -+#define BIT_WLAN_ON 1 -+#define BIT_WLAN_OFF 0 -+#define REG_DISPLAY_LCD 0xF79F -+ -+/* SCI Event Number from EC */ -+enum { -+ EVENT_LID = 0x23, /* Turn on/off LID */ -+ EVENT_SWITCHVIDEOMODE, /* Fn+F3 for display switch */ -+ EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ -+ EVENT_OVERTEMP, /* Over-temperature happened */ -+ EVENT_CRT_DETECT, /* CRT is connected */ -+ EVENT_CAMERA, /* Camera on/off */ -+ EVENT_USB_OC2, /* USB2 Over Current occurred */ -+ EVENT_USB_OC0, /* USB0 Over Current occurred */ -+ EVENT_DISPLAYTOGGLE, /* Fn+F2, Turn on/off backlight */ -+ EVENT_AUDIO_MUTE, /* Fn+F4, Mute on/off */ -+ EVENT_DISPLAY_BRIGHTNESS,/* Fn+^/V, LCD backlight brightness adjust */ -+ EVENT_AC_BAT, /* AC & Battery relative issue */ -+ EVENT_AUDIO_VOLUME, /* Fn+<|>, Volume adjust */ -+ EVENT_WLAN, /* Wlan on/off */ -+}; -+ -+#define EVENT_START EVENT_LID -+#define EVENT_END EVENT_WLAN -+ -+#endif /* !_EC_KB3310B_H */ -diff -Nur linux-2.6.36.orig/arch/mips/include/asm/mach-loongson/loongson.h linux-2.6.36/arch/mips/include/asm/mach-loongson/loongson.h ---- linux-2.6.36.orig/arch/mips/include/asm/mach-loongson/loongson.h 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/include/asm/mach-loongson/loongson.h 2010-11-18 11:47:59.000000000 +0100 -@@ -42,6 +42,12 @@ - #endif - } - -+/* -+ * Copy kernel command line from arcs_cmdline -+ */ -+#include <asm/setup.h> -+extern char loongson_cmdline[COMMAND_LINE_SIZE]; -+ - /* irq operation functions */ - extern void bonito_irqdispatch(void); - extern void __init bonito_irq_init(void); -diff -Nur linux-2.6.36.orig/arch/mips/kernel/csrc-r4k.c linux-2.6.36/arch/mips/kernel/csrc-r4k.c ---- linux-2.6.36.orig/arch/mips/kernel/csrc-r4k.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/kernel/csrc-r4k.c 2010-11-18 11:47:59.000000000 +0100 -@@ -6,10 +6,66 @@ - * Copyright (C) 2007 by Ralf Baechle - */ - #include <linux/clocksource.h> -+#include <linux/cnt32_to_63.h> - #include <linux/init.h> -+#include <linux/timer.h> - - #include <asm/time.h> - -+#ifdef CONFIG_CPU_SUPPORTS_HR_SCHED_CLOCK -+/* -+ * MIPS sched_clock implementation. -+ * -+ * Because the hardware timer period is quite short and because cnt32_to_63() -+ * needs to be called at least once per half period to work properly, a kernel -+ * timer is set up to ensure this requirement is always met. -+ * -+ * Please refer to include/linux/cnt32_to_63.h and arch/arm/plat-orion/time.c -+ */ -+#define CLOCK2NS_SCALE_FACTOR 8 -+ -+static unsigned long clock2ns_scale __read_mostly; -+ -+unsigned long long notrace sched_clock(void) -+{ -+ unsigned long long v = cnt32_to_63(read_c0_count()); -+ return (v * clock2ns_scale) >> CLOCK2NS_SCALE_FACTOR; -+} -+ -+static struct timer_list cnt32_to_63_keepwarm_timer; -+ -+static void cnt32_to_63_keepwarm(unsigned long data) -+{ -+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); -+ sched_clock(); -+} -+#endif -+ -+static inline void setup_hres_sched_clock(unsigned long clock) -+{ -+#ifdef CONFIG_CPU_SUPPORTS_HR_SCHED_CLOCK -+ unsigned long long v; -+ unsigned long data; -+ -+ v = NSEC_PER_SEC; -+ v <<= CLOCK2NS_SCALE_FACTOR; -+ v += clock/2; -+ do_div(v, clock); -+ /* -+ * We want an even value to automatically clear the top bit -+ * returned by cnt32_to_63() without an additional run time -+ * instruction. So if the LSB is 1 then round it up. -+ */ -+ if (v & 1) -+ v++; -+ clock2ns_scale = v; -+ -+ data = 0x80000000UL / clock * HZ; -+ setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data); -+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); -+#endif -+} -+ - static cycle_t c0_hpt_read(struct clocksource *cs) - { - return read_c0_count(); -@@ -27,6 +83,8 @@ - if (!cpu_has_counter || !mips_hpt_frequency) - return -ENXIO; - -+ setup_hres_sched_clock(mips_hpt_frequency); -+ - /* Calculate a somewhat reasonable rating value */ - clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; - -diff -Nur linux-2.6.36.orig/arch/mips/kernel/time.c linux-2.6.36/arch/mips/kernel/time.c ---- linux-2.6.36.orig/arch/mips/kernel/time.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/kernel/time.c 2010-11-18 11:47:59.000000000 +0100 -@@ -119,6 +119,11 @@ - - void __init time_init(void) - { -+#ifdef CONFIG_HR_SCHED_CLOCK -+ if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug()) -+ write_c0_count(0); -+#endif -+ - plat_time_init(); - - if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug()) -diff -Nur linux-2.6.36.orig/arch/mips/loongson/common/cmdline.c linux-2.6.36/arch/mips/loongson/common/cmdline.c ---- linux-2.6.36.orig/arch/mips/loongson/common/cmdline.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/common/cmdline.c 2010-11-18 11:47:59.000000000 +0100 -@@ -17,10 +17,15 @@ - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -+#include <linux/module.h> - #include <asm/bootinfo.h> - - #include <loongson.h> - -+/* the kernel command line copied from arcs_cmdline */ -+char loongson_cmdline[COMMAND_LINE_SIZE]; -+EXPORT_SYMBOL(loongson_cmdline); -+ - void __init prom_init_cmdline(void) - { - int prom_argc; -@@ -50,4 +55,26 @@ - strcat(arcs_cmdline, " root=/dev/hda1"); - - prom_init_machtype(); -+ -+ /* append machine specific command line */ -+ switch (mips_machtype) { -+ case MACH_LEMOTE_LL2F: -+ if ((strstr(arcs_cmdline, "video=")) == NULL) -+ strcat(arcs_cmdline, " video=sisfb:1360x768-16@60"); -+ break; -+ case MACH_LEMOTE_FL2F: -+ if ((strstr(arcs_cmdline, "ide_core.ignore_cable=")) == NULL) -+ strcat(arcs_cmdline, " ide_core.ignore_cable=0"); -+ break; -+ case MACH_LEMOTE_ML2F7: -+ /* Mengloong-2F has a 800x480 screen */ -+ if ((strstr(arcs_cmdline, "vga=")) == NULL) -+ strcat(arcs_cmdline, " vga=0x313"); -+ break; -+ default: -+ break; -+ } -+ -+ /* copy arcs_cmdline into loongson_cmdline */ -+ strncpy(loongson_cmdline, arcs_cmdline, COMMAND_LINE_SIZE); - } -diff -Nur linux-2.6.36.orig/arch/mips/loongson/common/cs5536/cs5536_acc.c linux-2.6.36/arch/mips/loongson/common/cs5536/cs5536_acc.c ---- linux-2.6.36.orig/arch/mips/loongson/common/cs5536/cs5536_acc.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/common/cs5536/cs5536_acc.c 2010-11-18 11:47:59.000000000 +0100 -@@ -18,7 +18,7 @@ - - void pci_acc_write_reg(int reg, u32 value) - { -- u32 hi = 0, lo = value; -+ u32 hi, lo; - - switch (reg) { - case PCI_COMMAND: -@@ -66,75 +66,73 @@ - u32 pci_acc_read_reg(int reg) - { - u32 hi, lo; -- u32 conf_data = 0; -+ u32 cfg = 0; - - switch (reg) { - case PCI_VENDOR_ID: -- conf_data = -- CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID); -+ cfg = CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, -+ CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); - if (((lo & 0xfff00000) || (hi & 0x000000ff)) - && ((hi & 0xf0000000) == 0xa0000000)) -- conf_data |= PCI_COMMAND_IO; -+ cfg |= PCI_COMMAND_IO; - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if ((lo & 0x300) == 0x300) -- conf_data |= PCI_COMMAND_MASTER; -+ cfg |= PCI_COMMAND_MASTER; - break; - case PCI_STATUS: -- conf_data |= PCI_STATUS_66MHZ; -- conf_data |= PCI_STATUS_FAST_BACK; -+ cfg |= PCI_STATUS_66MHZ; -+ cfg |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) -- conf_data |= PCI_STATUS_PARITY; -- conf_data |= PCI_STATUS_DEVSEL_MEDIUM; -+ cfg |= PCI_STATUS_PARITY; -+ cfg |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo); -- conf_data = lo & 0x000000ff; -- conf_data |= (CS5536_ACC_CLASS_CODE << 8); -+ cfg = lo & 0x000000ff; -+ cfg |= (CS5536_ACC_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: -- conf_data = -- CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, -- PCI_NORMAL_LATENCY_TIMER); -+ cfg = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, -+ PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_ACC_FLAG) { -- conf_data = CS5536_ACC_RANGE | -+ cfg = CS5536_ACC_RANGE | - PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~SOFT_BAR_ACC_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); -- conf_data = (hi & 0x000000ff) << 12; -- conf_data |= (lo & 0xfff00000) >> 20; -- conf_data |= 0x01; -- conf_data &= ~0x02; -+ cfg = (hi & 0x000000ff) << 12; -+ cfg |= (lo & 0xfff00000) >> 20; -+ cfg |= 0x01; -+ cfg &= ~0x02; - } - break; - case PCI_CARDBUS_CIS: -- conf_data = PCI_CARDBUS_CIS_POINTER; -+ cfg = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: -- conf_data = -- CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID); -+ cfg = CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, -+ CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: -- conf_data = PCI_EXPANSION_ROM_BAR; -+ cfg = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: -- conf_data = PCI_CAPLIST_USB_POINTER; -+ cfg = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: -- conf_data = -- CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); -+ cfg = CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); - break; - default: - break; - } - -- return conf_data; -+ return cfg; - } -diff -Nur linux-2.6.36.orig/arch/mips/loongson/common/cs5536/cs5536_ehci.c linux-2.6.36/arch/mips/loongson/common/cs5536/cs5536_ehci.c ---- linux-2.6.36.orig/arch/mips/loongson/common/cs5536/cs5536_ehci.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/common/cs5536/cs5536_ehci.c 2010-11-18 11:47:59.000000000 +0100 -@@ -18,7 +18,7 @@ - - void pci_ehci_write_reg(int reg, u32 value) - { -- u32 hi = 0, lo = value; -+ u32 hi, lo; - - switch (reg) { - case PCI_COMMAND: -@@ -78,83 +78,81 @@ - - u32 pci_ehci_read_reg(int reg) - { -- u32 conf_data = 0; -+ u32 cfg = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: -- conf_data = -- CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID); -+ cfg = CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, -+ CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); - if (hi & PCI_COMMAND_MASTER) -- conf_data |= PCI_COMMAND_MASTER; -+ cfg |= PCI_COMMAND_MASTER; - if (hi & PCI_COMMAND_MEMORY) -- conf_data |= PCI_COMMAND_MEMORY; -+ cfg |= PCI_COMMAND_MEMORY; - break; - case PCI_STATUS: -- conf_data |= PCI_STATUS_66MHZ; -- conf_data |= PCI_STATUS_FAST_BACK; -+ cfg |= PCI_STATUS_66MHZ; -+ cfg |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) -- conf_data |= PCI_STATUS_PARITY; -- conf_data |= PCI_STATUS_DEVSEL_MEDIUM; -+ cfg |= PCI_STATUS_PARITY; -+ cfg |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); -- conf_data = lo & 0x000000ff; -- conf_data |= (CS5536_EHCI_CLASS_CODE << 8); -+ cfg = lo & 0x000000ff; -+ cfg |= (CS5536_EHCI_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: -- conf_data = -- CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, -- PCI_NORMAL_LATENCY_TIMER); -+ cfg = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, -+ PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_EHCI_FLAG) { -- conf_data = CS5536_EHCI_RANGE | -+ cfg = CS5536_EHCI_RANGE | - PCI_BASE_ADDRESS_SPACE_MEMORY; - lo &= ~SOFT_BAR_EHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); -- conf_data = lo & 0xfffff000; -+ cfg = lo & 0xfffff000; - } - break; - case PCI_CARDBUS_CIS: -- conf_data = PCI_CARDBUS_CIS_POINTER; -+ cfg = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: -- conf_data = -- CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID); -+ cfg = CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, -+ CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: -- conf_data = PCI_EXPANSION_ROM_BAR; -+ cfg = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: -- conf_data = PCI_CAPLIST_USB_POINTER; -+ cfg = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: -- conf_data = -- CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); -+ cfg = CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); - break; - case PCI_EHCI_LEGSMIEN_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); -- conf_data = (hi & 0x003f0000) >> 16; -+ cfg = (hi & 0x003f0000) >> 16; - break; - case PCI_EHCI_LEGSMISTS_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); -- conf_data = (hi & 0x3f000000) >> 24; -+ cfg = (hi & 0x3f000000) >> 24; - break; - case PCI_EHCI_FLADJ_REG: - _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); -- conf_data = hi & 0x00003f00; -+ cfg = hi & 0x00003f00; - break; - default: - break; - } - -- return conf_data; -+ return cfg; - } -diff -Nur linux-2.6.36.orig/arch/mips/loongson/common/cs5536/cs5536_ide.c linux-2.6.36/arch/mips/loongson/common/cs5536/cs5536_ide.c ---- linux-2.6.36.orig/arch/mips/loongson/common/cs5536/cs5536_ide.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/common/cs5536/cs5536_ide.c 2010-11-18 11:47:59.000000000 +0100 -@@ -18,7 +18,7 @@ - - void pci_ide_write_reg(int reg, u32 value) - { -- u32 hi = 0, lo = value; -+ u32 hi, lo; - - switch (reg) { - case PCI_COMMAND: -@@ -72,26 +72,16 @@ - _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo); - } - break; -- case PCI_IDE_DTC_REG: -- _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); -- lo = value; -- _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo); -- break; -- case PCI_IDE_CAST_REG: -- _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); -- lo = value; -- _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo); -- break; -- case PCI_IDE_ETC_REG: -- _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); -- lo = value; -- _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo); -- break; -- case PCI_IDE_PM_REG: -- _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); -- lo = value; -- _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo); -- break; -+#define SET_PCI_IDE_REG(r) \ -+ case PCI_IDE_##r##_REG: \ -+ _rdmsr(IDE_MSR_REG(IDE_##r), &hi, &lo); \ -+ lo = value; \ -+ _wrmsr(IDE_MSR_REG(IDE_##r), hi, lo); \ -+ break; -+ SET_PCI_IDE_REG(DTC) -+ SET_PCI_IDE_REG(CAST) -+ SET_PCI_IDE_REG(ETC) -+ SET_PCI_IDE_REG(PM) - default: - break; - } -@@ -99,94 +89,82 @@ - - u32 pci_ide_read_reg(int reg) - { -- u32 conf_data = 0; -+ u32 cfg = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: -- conf_data = -- CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID); -+ cfg = CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, -+ CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); - if (lo & 0xfffffff0) -- conf_data |= PCI_COMMAND_IO; -+ cfg |= PCI_COMMAND_IO; - _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); - if ((lo & 0x30) == 0x30) -- conf_data |= PCI_COMMAND_MASTER; -+ cfg |= PCI_COMMAND_MASTER; - break; - case PCI_STATUS: -- conf_data |= PCI_STATUS_66MHZ; -- conf_data |= PCI_STATUS_FAST_BACK; -+ cfg |= PCI_STATUS_66MHZ; -+ cfg |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) -- conf_data |= PCI_STATUS_PARITY; -- conf_data |= PCI_STATUS_DEVSEL_MEDIUM; -+ cfg |= PCI_STATUS_PARITY; -+ cfg |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo); -- conf_data = lo & 0x000000ff; -- conf_data |= (CS5536_IDE_CLASS_CODE << 8); -+ cfg = lo & 0x000000ff; -+ cfg |= (CS5536_IDE_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: - _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); - hi &= 0x000000f8; -- conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); -+ cfg = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); - break; - case PCI_BAR4_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_IDE_FLAG) { -- conf_data = CS5536_IDE_RANGE | -+ cfg = CS5536_IDE_RANGE | - PCI_BASE_ADDRESS_SPACE_IO; - lo &= ~SOFT_BAR_IDE_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); -- conf_data = lo & 0xfffffff0; -- conf_data |= 0x01; -- conf_data &= ~0x02; -+ cfg = lo & 0xfffffff0; -+ cfg |= 0x01; -+ cfg &= ~0x02; - } - break; - case PCI_CARDBUS_CIS: -- conf_data = PCI_CARDBUS_CIS_POINTER; -+ cfg = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: -- conf_data = -- CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID); -+ cfg = CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, -+ CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: -- conf_data = PCI_EXPANSION_ROM_BAR; -+ cfg = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: -- conf_data = PCI_CAPLIST_POINTER; -+ cfg = PCI_CAPLIST_POINTER; - break; - case PCI_INTERRUPT_LINE: -- conf_data = -- CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); -- break; -- case PCI_IDE_CFG_REG: -- _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); -- conf_data = lo; -- break; -- case PCI_IDE_DTC_REG: -- _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); -- conf_data = lo; -- break; -- case PCI_IDE_CAST_REG: -- _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); -- conf_data = lo; -- break; -- case PCI_IDE_ETC_REG: -- _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); -- conf_data = lo; -- break; -- case PCI_IDE_PM_REG: -- _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); -- conf_data = lo; -+ cfg = CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); - break; -+#define GET_PCI_IDE_REG(r) \ -+ case PCI_IDE_##r##_REG: \ -+ _rdmsr(IDE_MSR_REG(IDE_##r), &hi, &cfg); \ -+ break; -+ GET_PCI_IDE_REG(CFG) -+ GET_PCI_IDE_REG(DTC) -+ GET_PCI_IDE_REG(CAST) -+ GET_PCI_IDE_REG(ETC) -+ GET_PCI_IDE_REG(PM) - default: - break; - } - -- return conf_data; -+ return cfg; - } -diff -Nur linux-2.6.36.orig/arch/mips/loongson/common/cs5536/cs5536_ohci.c linux-2.6.36/arch/mips/loongson/common/cs5536/cs5536_ohci.c ---- linux-2.6.36.orig/arch/mips/loongson/common/cs5536/cs5536_ohci.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/common/cs5536/cs5536_ohci.c 2010-11-18 11:47:59.000000000 +0100 -@@ -18,7 +18,7 @@ - - void pci_ohci_write_reg(int reg, u32 value) - { -- u32 hi = 0, lo = value; -+ u32 hi, lo; - - switch (reg) { - case PCI_COMMAND: -@@ -73,77 +73,75 @@ - - u32 pci_ohci_read_reg(int reg) - { -- u32 conf_data = 0; -+ u32 cfg = 0; - u32 hi, lo; - - switch (reg) { - case PCI_VENDOR_ID: -- conf_data = -- CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID); -+ cfg = CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, -+ CS5536_VENDOR_ID); - break; - case PCI_COMMAND: - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); - if (hi & PCI_COMMAND_MASTER) -- conf_data |= PCI_COMMAND_MASTER; -+ cfg |= PCI_COMMAND_MASTER; - if (hi & PCI_COMMAND_MEMORY) -- conf_data |= PCI_COMMAND_MEMORY; -+ cfg |= PCI_COMMAND_MEMORY; - break; - case PCI_STATUS: -- conf_data |= PCI_STATUS_66MHZ; -- conf_data |= PCI_STATUS_FAST_BACK; -+ cfg |= PCI_STATUS_66MHZ; -+ cfg |= PCI_STATUS_FAST_BACK; - _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); - if (lo & SB_PARE_ERR_FLAG) -- conf_data |= PCI_STATUS_PARITY; -- conf_data |= PCI_STATUS_DEVSEL_MEDIUM; -+ cfg |= PCI_STATUS_PARITY; -+ cfg |= PCI_STATUS_DEVSEL_MEDIUM; - break; - case PCI_CLASS_REVISION: - _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); -- conf_data = lo & 0x000000ff; -- conf_data |= (CS5536_OHCI_CLASS_CODE << 8); -+ cfg = lo & 0x000000ff; -+ cfg |= (CS5536_OHCI_CLASS_CODE << 8); - break; - case PCI_CACHE_LINE_SIZE: -- conf_data = -- CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, -- PCI_NORMAL_LATENCY_TIMER); -+ cfg = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, -+ PCI_NORMAL_LATENCY_TIMER); - break; - case PCI_BAR0_REG: - _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); - if (lo & SOFT_BAR_OHCI_FLAG) { -- conf_data = CS5536_OHCI_RANGE | -+ cfg = CS5536_OHCI_RANGE | - PCI_BASE_ADDRESS_SPACE_MEMORY; - lo &= ~SOFT_BAR_OHCI_FLAG; - _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); - } else { - _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); -- conf_data = lo & 0xffffff00; -- conf_data &= ~0x0000000f; /* 32bit mem */ -+ cfg = lo & 0xffffff00; -+ cfg &= ~0x0000000f; /* 32bit mem */ - } - break; - case PCI_CARDBUS_CIS: -- conf_data = PCI_CARDBUS_CIS_POINTER; -+ cfg = PCI_CARDBUS_CIS_POINTER; - break; - case PCI_SUBSYSTEM_VENDOR_ID: -- conf_data = -- CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID); -+ cfg = CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, -+ CS5536_SUB_VENDOR_ID); - break; - case PCI_ROM_ADDRESS: -- conf_data = PCI_EXPANSION_ROM_BAR; -+ cfg = PCI_EXPANSION_ROM_BAR; - break; - case PCI_CAPABILITY_LIST: -- conf_data = PCI_CAPLIST_USB_POINTER; -+ cfg = PCI_CAPLIST_USB_POINTER; - break; - case PCI_INTERRUPT_LINE: -- conf_data = -- CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); -+ cfg = CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); - break; - case PCI_OHCI_INT_REG: - _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - if ((lo & 0x00000f00) == CS5536_USB_INTR) -- conf_data = 1; -+ cfg = 1; - break; - default: - break; - } - -- return conf_data; -+ return cfg; - } -diff -Nur linux-2.6.36.orig/arch/mips/loongson/common/mtd.c linux-2.6.36/arch/mips/loongson/common/mtd.c ---- linux-2.6.36.orig/arch/mips/loongson/common/mtd.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.36/arch/mips/loongson/common/mtd.c 2010-11-18 11:47:59.000000000 +0100 -@@ -0,0 +1,91 @@ -+/* -+ * Driver for flushing/dumping ROM of PMON on loongson family machines -+ * -+ * Copyright (C) 2008-2009 Lemote Inc. -+ * Author: Yan Hua <yanh@lemote.com> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/map.h> -+#include <linux/mtd/partitions.h> -+ -+#include <asm/io.h> -+ -+#include <loongson.h> -+ -+#define FLASH_PHYS_ADDR LOONGSON_BOOT_BASE -+#define FLASH_SIZE 0x080000 -+ -+#define FLASH_PARTITION0_ADDR 0x00000000 -+#define FLASH_PARTITION0_SIZE 0x00080000 -+ -+struct map_info flash_map = { -+ .name = "flash device", -+ .size = FLASH_SIZE, -+ .bankwidth = 1, -+}; -+ -+struct mtd_partition flash_parts[] = { -+ { -+ .name = "Bootloader", -+ .offset = FLASH_PARTITION0_ADDR, -+ .size = FLASH_PARTITION0_SIZE}, -+}; -+ -+#define PARTITION_COUNT ARRAY_SIZE(flash_parts) -+ -+static struct mtd_info *mymtd; -+ -+int __init init_flash(void) -+{ -+ printk(KERN_NOTICE "flash device: %x at %x\n", -+ FLASH_SIZE, FLASH_PHYS_ADDR); -+ -+ flash_map.phys = FLASH_PHYS_ADDR; -+ flash_map.virt = ioremap(FLASH_PHYS_ADDR, FLASH_SIZE); -+ -+ if (!flash_map.virt) { -+ printk(KERN_NOTICE "Failed to ioremap\n"); -+ return -EIO; -+ } -+ -+ simple_map_init(&flash_map); -+ -+ mymtd = do_map_probe("cfi_probe", &flash_map); -+ if (mymtd) { -+ add_mtd_partitions(mymtd, flash_parts, PARTITION_COUNT); -+ printk(KERN_NOTICE "pmon flash device initialized\n"); -+ return 0; -+ } -+ -+ iounmap((void *)flash_map.virt); -+ return -ENXIO; -+} -+ -+static void __exit cleanup_flash(void) -+{ -+ if (mymtd) { -+ del_mtd_partitions(mymtd); -+ map_destroy(mymtd); -+ } -+ if (flash_map.virt) { -+ iounmap((void *)flash_map.virt); -+ flash_map.virt = 0; -+ } -+} -+ -+module_init(init_flash); -+module_exit(cleanup_flash); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Yanhua <yanh@lemote.com>"); -+MODULE_DESCRIPTION("MTD driver for pmon flushing/dumping"); -diff -Nur linux-2.6.36.orig/arch/mips/loongson/lemote-2f/Makefile linux-2.6.36/arch/mips/loongson/lemote-2f/Makefile ---- linux-2.6.36.orig/arch/mips/loongson/lemote-2f/Makefile 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/lemote-2f/Makefile 2010-11-18 11:47:59.000000000 +0100 -@@ -2,7 +2,7 @@ - # Makefile for lemote loongson2f family machines - # - --obj-y += machtype.o irq.o reset.o ec_kb3310b.o -+obj-y += machtype.o irq.o reset.o ec_kb3310b.o platform.o - - # - # Suspend Support -diff -Nur linux-2.6.36.orig/arch/mips/loongson/lemote-2f/ec_kb3310b.c linux-2.6.36/arch/mips/loongson/lemote-2f/ec_kb3310b.c ---- linux-2.6.36.orig/arch/mips/loongson/lemote-2f/ec_kb3310b.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/lemote-2f/ec_kb3310b.c 2010-11-18 11:47:59.000000000 +0100 -@@ -14,7 +14,7 @@ - #include <linux/spinlock.h> - #include <linux/delay.h> - --#include "ec_kb3310b.h" -+#include <ec_kb3310b.h> - - static DEFINE_SPINLOCK(index_access_lock); - static DEFINE_SPINLOCK(port_access_lock); -@@ -78,12 +78,9 @@ - spin_unlock_irqrestore(&port_access_lock, flags); - - if (timeout <= 0) { -- printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); -+ pr_err("%s: deadable error : timeout...\n", __func__); - ret = -EINVAL; -- } else -- printk(KERN_INFO -- "(%x/%d)ec issued command %d status : 0x%x\n", -- timeout, EC_CMD_TIMEOUT - timeout, cmd, status); -+ } - - return ret; - } -@@ -118,8 +115,7 @@ - udelay(EC_REG_DELAY); - } - if (timeout <= 0) { -- pr_info("%s: get event number timeout.\n", __func__); -- -+ pr_err("%s: get event number timeout.\n", __func__); - return -EINVAL; - } - value = inb(EC_DAT_PORT); -diff -Nur linux-2.6.36.orig/arch/mips/loongson/lemote-2f/ec_kb3310b.h linux-2.6.36/arch/mips/loongson/lemote-2f/ec_kb3310b.h ---- linux-2.6.36.orig/arch/mips/loongson/lemote-2f/ec_kb3310b.h 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/lemote-2f/ec_kb3310b.h 1970-01-01 01:00:00.000000000 +0100 -@@ -1,188 +0,0 @@ --/* -- * KB3310B Embedded Controller -- * -- * Copyright (C) 2008 Lemote Inc. -- * Author: liujl <liujl@lemote.com>, 2008-03-14 -- * -- * This program is free software; you can redistribute it and/or modify -- * it under the terms of the GNU General Public License as published by -- * the Free Software Foundation; either version 2 of the License, or -- * (at your option) any later version. -- */ -- --#ifndef _EC_KB3310B_H --#define _EC_KB3310B_H -- --extern unsigned char ec_read(unsigned short addr); --extern void ec_write(unsigned short addr, unsigned char val); --extern int ec_query_seq(unsigned char cmd); --extern int ec_query_event_num(void); --extern int ec_get_event_num(void); -- --typedef int (*sci_handler) (int status); --extern sci_handler yeeloong_report_lid_status; -- --#define SCI_IRQ_NUM 0x0A -- --/* -- * The following registers are determined by the EC index configuration. -- * 1, fill the PORT_HIGH as EC register high part. -- * 2, fill the PORT_LOW as EC register low part. -- * 3, fill the PORT_DATA as EC register write data or get the data from it. -- */ --#define EC_IO_PORT_HIGH 0x0381 --#define EC_IO_PORT_LOW 0x0382 --#define EC_IO_PORT_DATA 0x0383 -- --/* -- * EC delay time is 500us for register and status access -- */ --#define EC_REG_DELAY 500 /* unit : us */ --#define EC_CMD_TIMEOUT 0x1000 -- --/* -- * EC access port for SCI communication -- */ --#define EC_CMD_PORT 0x66 --#define EC_STS_PORT 0x66 --#define EC_DAT_PORT 0x62 --#define CMD_INIT_IDLE_MODE 0xdd --#define CMD_EXIT_IDLE_MODE 0xdf --#define CMD_INIT_RESET_MODE 0xd8 --#define CMD_REBOOT_SYSTEM 0x8c --#define CMD_GET_EVENT_NUM 0x84 --#define CMD_PROGRAM_PIECE 0xda -- --/* temperature & fan registers */ --#define REG_TEMPERATURE_VALUE 0xF458 --#define REG_FAN_AUTO_MAN_SWITCH 0xF459 --#define BIT_FAN_AUTO 0 --#define BIT_FAN_MANUAL 1 --#define REG_FAN_CONTROL 0xF4D2 --#define BIT_FAN_CONTROL_ON (1 << 0) --#define BIT_FAN_CONTROL_OFF (0 << 0) --#define REG_FAN_STATUS 0xF4DA --#define BIT_FAN_STATUS_ON (1 << 0) --#define BIT_FAN_STATUS_OFF (0 << 0) --#define REG_FAN_SPEED_HIGH 0xFE22 --#define REG_FAN_SPEED_LOW 0xFE23 --#define REG_FAN_SPEED_LEVEL 0xF4CC --/* fan speed divider */ --#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ -- --/* battery registers */ --#define REG_BAT_DESIGN_CAP_HIGH 0xF77D --#define REG_BAT_DESIGN_CAP_LOW 0xF77E --#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 --#define REG_BAT_FULLCHG_CAP_LOW 0xF781 --#define REG_BAT_DESIGN_VOL_HIGH 0xF782 --#define REG_BAT_DESIGN_VOL_LOW 0xF783 --#define REG_BAT_CURRENT_HIGH 0xF784 --#define REG_BAT_CURRENT_LOW 0xF785 --#define REG_BAT_VOLTAGE_HIGH 0xF786 --#define REG_BAT_VOLTAGE_LOW 0xF787 --#define REG_BAT_TEMPERATURE_HIGH 0xF788 --#define REG_BAT_TEMPERATURE_LOW 0xF789 --#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 --#define REG_BAT_RELATIVE_CAP_LOW 0xF493 --#define REG_BAT_VENDOR 0xF4C4 --#define FLAG_BAT_VENDOR_SANYO 0x01 --#define FLAG_BAT_VENDOR_SIMPLO 0x02 --#define REG_BAT_CELL_COUNT 0xF4C6 --#define FLAG_BAT_CELL_3S1P 0x03 --#define FLAG_BAT_CELL_3S2P 0x06 --#define REG_BAT_CHARGE 0xF4A2 --#define FLAG_BAT_CHARGE_DISCHARGE 0x01 --#define FLAG_BAT_CHARGE_CHARGE 0x02 --#define FLAG_BAT_CHARGE_ACPOWER 0x00 --#define REG_BAT_STATUS 0xF4B0 --#define BIT_BAT_STATUS_LOW (1 << 5) --#define BIT_BAT_STATUS_DESTROY (1 << 2) --#define BIT_BAT_STATUS_FULL (1 << 1) --#define BIT_BAT_STATUS_IN (1 << 0) --#define REG_BAT_CHARGE_STATUS 0xF4B1 --#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) --#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) --#define REG_BAT_STATE 0xF482 --#define BIT_BAT_STATE_CHARGING (1 << 1) --#define BIT_BAT_STATE_DISCHARGING (1 << 0) --#define REG_BAT_POWER 0xF440 --#define BIT_BAT_POWER_S3 (1 << 2) --#define BIT_BAT_POWER_ON (1 << 1) --#define BIT_BAT_POWER_ACIN (1 << 0) -- --/* other registers */ --/* Audio: rd/wr */ --#define REG_AUDIO_VOLUME 0xF46C --#define REG_AUDIO_MUTE 0xF4E7 --#define REG_AUDIO_BEEP 0xF4D0 --/* USB port power or not: rd/wr */ --#define REG_USB0_FLAG 0xF461 --#define REG_USB1_FLAG 0xF462 --#define REG_USB2_FLAG 0xF463 --#define BIT_USB_FLAG_ON 1 --#define BIT_USB_FLAG_OFF 0 --/* LID */ --#define REG_LID_DETECT 0xF4BD --#define BIT_LID_DETECT_ON 1 --#define BIT_LID_DETECT_OFF 0 --/* CRT */ --#define REG_CRT_DETECT 0xF4AD --#define BIT_CRT_DETECT_PLUG 1 --#define BIT_CRT_DETECT_UNPLUG 0 --/* LCD backlight brightness adjust: 9 levels */ --#define REG_DISPLAY_BRIGHTNESS 0xF4F5 --/* Black screen Status */ --#define BIT_DISPLAY_LCD_ON 1 --#define BIT_DISPLAY_LCD_OFF 0 --/* LCD backlight control: off/restore */ --#define REG_BACKLIGHT_CTRL 0xF7BD --#define BIT_BACKLIGHT_ON 1 --#define BIT_BACKLIGHT_OFF 0 --/* Reset the machine auto-clear: rd/wr */ --#define REG_RESET 0xF4EC --#define BIT_RESET_ON 1 --/* Light the led: rd/wr */ --#define REG_LED 0xF4C8 --#define BIT_LED_RED_POWER (1 << 0) --#define BIT_LED_ORANGE_POWER (1 << 1) --#define BIT_LED_GREEN_CHARGE (1 << 2) --#define BIT_LED_RED_CHARGE (1 << 3) --#define BIT_LED_NUMLOCK (1 << 4) --/* Test led mode, all led on/off */ --#define REG_LED_TEST 0xF4C2 --#define BIT_LED_TEST_IN 1 --#define BIT_LED_TEST_OUT 0 --/* Camera on/off */ --#define REG_CAMERA_STATUS 0xF46A --#define BIT_CAMERA_STATUS_ON 1 --#define BIT_CAMERA_STATUS_OFF 0 --#define REG_CAMERA_CONTROL 0xF7B7 --#define BIT_CAMERA_CONTROL_OFF 0 --#define BIT_CAMERA_CONTROL_ON 1 --/* Wlan Status */ --#define REG_WLAN 0xF4FA --#define BIT_WLAN_ON 1 --#define BIT_WLAN_OFF 0 --#define REG_DISPLAY_LCD 0xF79F -- --/* SCI Event Number from EC */ --enum { -- EVENT_LID = 0x23, /* LID open/close */ -- EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ -- EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ -- EVENT_OVERTEMP, /* Over-temperature happened */ -- EVENT_CRT_DETECT, /* CRT is connected */ -- EVENT_CAMERA, /* Camera on/off */ -- EVENT_USB_OC2, /* USB2 Over Current occurred */ -- EVENT_USB_OC0, /* USB0 Over Current occurred */ -- EVENT_BLACK_SCREEN, /* Turn on/off backlight */ -- EVENT_AUDIO_MUTE, /* Mute on/off */ -- EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ -- EVENT_AC_BAT, /* AC & Battery relative issue */ -- EVENT_AUDIO_VOLUME, /* Volume adjust */ -- EVENT_WLAN, /* Wlan on/off */ -- EVENT_END --}; -- --#endif /* !_EC_KB3310B_H */ -diff -Nur linux-2.6.36.orig/arch/mips/loongson/lemote-2f/platform.c linux-2.6.36/arch/mips/loongson/lemote-2f/platform.c ---- linux-2.6.36.orig/arch/mips/loongson/lemote-2f/platform.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.36/arch/mips/loongson/lemote-2f/platform.c 2010-11-18 11:47:59.000000000 +0100 -@@ -0,0 +1,48 @@ -+/* -+ * Copyright (C) 2009 Lemote Inc. -+ * Author: Wu Zhangjin, wuzhangjin@gmail.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include <linux/err.h> -+#include <linux/platform_device.h> -+ -+#include <asm/bootinfo.h> -+ -+static struct platform_device yeeloong_pdev = { -+ .name = "yeeloong_laptop", -+ .id = -1, -+}; -+ -+static struct platform_device lynloong_pdev = { -+ .name = "lynloong_pc", -+ .id = -1, -+}; -+ -+static int __init lemote2f_platform_init(void) -+{ -+ struct platform_device *pdev = NULL; -+ -+ switch (mips_machtype) { -+ case MACH_LEMOTE_YL2F89: -+ pdev = &yeeloong_pdev; -+ break; -+ case MACH_LEMOTE_LL2F: -+ pdev = &lynloong_pdev; -+ break; -+ default: -+ break; -+ -+ } -+ -+ if (pdev != NULL) -+ return platform_device_register(pdev); -+ -+ return -ENODEV; -+} -+ -+arch_initcall(lemote2f_platform_init); -diff -Nur linux-2.6.36.orig/arch/mips/loongson/lemote-2f/pm.c linux-2.6.36/arch/mips/loongson/lemote-2f/pm.c ---- linux-2.6.36.orig/arch/mips/loongson/lemote-2f/pm.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/lemote-2f/pm.c 2010-11-18 11:47:59.000000000 +0100 -@@ -23,7 +23,7 @@ - #include <loongson.h> - - #include <cs5536/cs5536_mfgpt.h> --#include "ec_kb3310b.h" -+#include <ec_kb3310b.h> - - #define I8042_KBD_IRQ 1 - #define I8042_CTR_KBDINT 0x01 -@@ -100,7 +100,7 @@ - if (irq < 0) - return 0; - -- printk(KERN_INFO "%s: irq = %d\n", __func__, irq); -+ pr_info("%s: irq = %d\n", __func__, irq); - - if (irq == I8042_KBD_IRQ) - return 1; -diff -Nur linux-2.6.36.orig/arch/mips/loongson/lemote-2f/reset.c linux-2.6.36/arch/mips/loongson/lemote-2f/reset.c ---- linux-2.6.36.orig/arch/mips/loongson/lemote-2f/reset.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/loongson/lemote-2f/reset.c 2010-11-18 11:47:59.000000000 +0100 -@@ -20,7 +20,7 @@ - #include <loongson.h> - - #include <cs5536/cs5536.h> --#include "ec_kb3310b.h" -+#include <ec_kb3310b.h> - - static void reset_cpu(void) - { -diff -Nur linux-2.6.36.orig/arch/mips/mm/dma-default.c linux-2.6.36/arch/mips/mm/dma-default.c ---- linux-2.6.36.orig/arch/mips/mm/dma-default.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/arch/mips/mm/dma-default.c 2010-11-18 11:47:59.000000000 +0100 -@@ -380,3 +380,16 @@ - } - - EXPORT_SYMBOL(dma_cache_sync); -+ -+int __weak dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma, -+ void *cpu_addr, dma_addr_t handle, size_t size) -+{ -+ struct page *pg; -+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); -+ cpu_addr = (void *)dma_addr_to_virt(dev, handle); -+ pg = virt_to_page(cpu_addr); -+ return remap_pfn_range(vma, vma->vm_start, -+ page_to_pfn(pg) + vma->vm_pgoff, -+ size, vma->vm_page_prot); -+} -+EXPORT_SYMBOL(dma_mmap_coherent); -diff -Nur linux-2.6.36.orig/drivers/ide/ide-iops.c linux-2.6.36/drivers/ide/ide-iops.c ---- linux-2.6.36.orig/drivers/ide/ide-iops.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/drivers/ide/ide-iops.c 2010-11-18 11:47:59.000000000 +0100 -@@ -27,6 +27,8 @@ - #include <asm/uaccess.h> - #include <asm/io.h> - -+#include <asm/bootinfo.h> -+ - void SELECT_MASK(ide_drive_t *drive, int mask) - { - const struct ide_port_ops *port_ops = drive->hwif->port_ops; -@@ -300,6 +302,9 @@ - { - const char **list, *m = (char *)&drive->id[ATA_ID_PROD]; - -+ if (mips_machtype != MACH_LEMOTE_YL2F89) -+ return; -+ - for (list = nien_quirk_list; *list != NULL; list++) - if (strstr(m, *list) != NULL) { - drive->dev_flags |= IDE_DFLAG_NIEN_QUIRK; -diff -Nur linux-2.6.36.orig/drivers/platform/Kconfig linux-2.6.36/drivers/platform/Kconfig ---- linux-2.6.36.orig/drivers/platform/Kconfig 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/drivers/platform/Kconfig 2010-11-18 11:47:59.000000000 +0100 -@@ -1,3 +1,7 @@ - if X86 - source "drivers/platform/x86/Kconfig" - endif -+ -+if MIPS -+source "drivers/platform/mips/Kconfig" -+endif -diff -Nur linux-2.6.36.orig/drivers/platform/Makefile linux-2.6.36/drivers/platform/Makefile ---- linux-2.6.36.orig/drivers/platform/Makefile 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/drivers/platform/Makefile 2010-11-18 11:47:59.000000000 +0100 -@@ -3,3 +3,4 @@ - # - - obj-$(CONFIG_X86) += x86/ -+obj-$(CONFIG_MIPS) += mips/ -diff -Nur linux-2.6.36.orig/drivers/platform/mips/Kconfig linux-2.6.36/drivers/platform/mips/Kconfig ---- linux-2.6.36.orig/drivers/platform/mips/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.36/drivers/platform/mips/Kconfig 2010-11-18 11:47:59.000000000 +0100 -@@ -0,0 +1,43 @@ -+# -+# MIPS Platform Specific Drivers -+# -+ -+menuconfig MIPS_PLATFORM_DEVICES -+ bool "MIPS Platform Specific Device Drivers" -+ default y -+ help -+ Say Y here to get to see options for device drivers of various -+ MIPS platforms, including vendor-specific netbook/laptop/pc extension -+ drivers. This option alone does not add any kernel code. -+ -+ If you say N, all options in this submenu will be skipped and disabled. -+ -+if MIPS_PLATFORM_DEVICES -+ -+config LEMOTE_YEELOONG2F -+ tristate "Lemote YeeLoong Laptop" -+ depends on LEMOTE_MACH2F -+ select BACKLIGHT_CLASS_DEVICE -+ select POWER_SUPPLY -+ select HWMON -+ select VIDEO_OUTPUT_CONTROL -+ select INPUT_SPARSEKMAP -+ depends on INPUT -+ help -+ YeeLoong netbook is a mini laptop made by Lemote, which is basically -+ compatible to FuLoong2F mini PC, but it has an extra Embedded -+ Controller(kb3310b) for battery, hotkey, backlight, temperature and -+ fan management. -+ -+config LEMOTE_LYNLOONG2F -+ tristate "Lemote LynLoong PC" -+ depends on LEMOTE_MACH2F -+ select BACKLIGHT_CLASS_DEVICE -+ select VIDEO_OUTPUT_CONTROL -+ help -+ LynLoong PC is an AllINONE machine made by Lemote, which is basically -+ compatible to FuLoong2F Mini PC, the only difference is that it has a -+ size-fixed screen: 1360x768 with sisfb video driver. and also, it has -+ its own specific suspend support. -+ -+endif # MIPS_PLATFORM_DEVICES -diff -Nur linux-2.6.36.orig/drivers/platform/mips/Makefile linux-2.6.36/drivers/platform/mips/Makefile ---- linux-2.6.36.orig/drivers/platform/mips/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.36/drivers/platform/mips/Makefile 2010-11-18 11:47:59.000000000 +0100 -@@ -0,0 +1,7 @@ -+# -+# Makefile for MIPS Platform-Specific Drivers -+# -+ -+obj-$(CONFIG_LEMOTE_YEELOONG2F) += yeeloong_laptop.o -+ -+obj-$(CONFIG_LEMOTE_LYNLOONG2F) += lynloong_pc.o -diff -Nur linux-2.6.36.orig/drivers/platform/mips/lynloong_pc.c linux-2.6.36/drivers/platform/mips/lynloong_pc.c ---- linux-2.6.36.orig/drivers/platform/mips/lynloong_pc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.36/drivers/platform/mips/lynloong_pc.c 2010-11-18 11:47:59.000000000 +0100 -@@ -0,0 +1,513 @@ -+/* -+ * Driver for LynLoong PC extras -+ * -+ * Copyright (C) 2009 Lemote Inc. -+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>, Xiang Yu <xiangy@lemote.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/err.h> -+#include <linux/platform_device.h> -+#include <linux/backlight.h> /* for backlight subdriver */ -+#include <linux/fb.h> -+#include <linux/video_output.h> /* for video output subdriver */ -+#include <linux/delay.h> /* for suspend support */ -+ -+#include <cs5536/cs5536.h> -+#include <cs5536/cs5536_mfgpt.h> -+ -+#include <loongson.h> -+ -+static u32 gpio_base, mfgpt_base; -+ -+static void set_gpio_reg_high(int gpio, int reg) -+{ -+ u32 val; -+ -+ val = inl(gpio_base + reg); -+ val |= (1 << gpio); -+ val &= ~(1 << (16 + gpio)); -+ outl(val, gpio_base + reg); -+ mmiowb(); -+} -+ -+static void set_gpio_reg_low(int gpio, int reg) -+{ -+ u32 val; -+ -+ val = inl(gpio_base + reg); -+ val |= (1 << (16 + gpio)); -+ val &= ~(1 << gpio); -+ outl(val, gpio_base + reg); -+ mmiowb(); -+} -+ -+static void set_gpio_output_low(int gpio) -+{ -+ set_gpio_reg_high(gpio, GPIOL_OUT_EN); -+ set_gpio_reg_low(gpio, GPIOL_OUT_VAL); -+} -+ -+static void set_gpio_output_high(int gpio) -+{ -+ set_gpio_reg_high(gpio, GPIOL_OUT_EN); -+ set_gpio_reg_high(gpio, GPIOL_OUT_VAL); -+} -+ -+/* backlight subdriver */ -+ -+#define MAX_BRIGHTNESS 100 -+#define DEFAULT_BRIGHTNESS 50 -+#define MIN_BRIGHTNESS 0 -+static unsigned int level; -+ -+DEFINE_SPINLOCK(backlight_lock); -+/* Tune the brightness */ -+static void setup_mfgpt2(void) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&backlight_lock, flags); -+ -+ /* Set MFGPT2 comparator 1,2 */ -+ outw(MAX_BRIGHTNESS-level, MFGPT2_CMP1); -+ outw(MAX_BRIGHTNESS, MFGPT2_CMP2); -+ /* Clear MFGPT2 UP COUNTER */ -+ outw(0, MFGPT2_CNT); -+ /* Enable counter, compare mode, 32k */ -+ outw(0x8280, MFGPT2_SETUP); -+ -+ spin_unlock_irqrestore(&backlight_lock, flags); -+} -+ -+static int lynloong_set_brightness(struct backlight_device *bd) -+{ -+ level = (bd->props.fb_blank == FB_BLANK_UNBLANK && -+ bd->props.power == FB_BLANK_UNBLANK) ? -+ bd->props.brightness : 0; -+ -+ if (level > MAX_BRIGHTNESS) -+ level = MAX_BRIGHTNESS; -+ else if (level < MIN_BRIGHTNESS) -+ level = MIN_BRIGHTNESS; -+ -+ setup_mfgpt2(); -+ -+ return 0; -+} -+ -+static int lynloong_get_brightness(struct backlight_device *bd) -+{ -+ return level; -+} -+ -+static struct backlight_ops backlight_ops = { -+ .get_brightness = lynloong_get_brightness, -+ .update_status = lynloong_set_brightness, -+}; -+ -+static struct backlight_device *lynloong_backlight_dev; -+ -+static int lynloong_backlight_init(void) -+{ -+ int ret; -+ u32 hi; -+ struct backlight_properties props; -+ -+ /* Get gpio_base */ -+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &gpio_base); -+ /* Get mfgpt_base */ -+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &hi, &mfgpt_base); -+ /* Get gpio_base */ -+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &gpio_base); -+ -+ /* Select for mfgpt */ -+ set_gpio_reg_high(7, GPIOL_OUT_AUX1_SEL); -+ /* Enable brightness controlling */ -+ set_gpio_output_high(7); -+ -+ memset(&props, 0, sizeof(struct backlight_properties)); -+ props.max_brightness = MAX_BRIGHTNESS; -+ lynloong_backlight_dev = backlight_device_register("backlight0", NULL, -+ NULL, &backlight_ops, &props); -+ -+ if (IS_ERR(lynloong_backlight_dev)) { -+ ret = PTR_ERR(lynloong_backlight_dev); -+ return ret; -+ } -+ -+ lynloong_backlight_dev->props.brightness = DEFAULT_BRIGHTNESS; -+ backlight_update_status(lynloong_backlight_dev); -+ -+ return 0; -+} -+ -+static void lynloong_backlight_exit(void) -+{ -+ if (lynloong_backlight_dev) { -+ backlight_device_unregister(lynloong_backlight_dev); -+ lynloong_backlight_dev = NULL; -+ } -+ /* Disable brightness controlling */ -+ set_gpio_output_low(7); -+} -+ -+/* video output driver */ -+static int vo_status = 1; -+ -+static int lcd_video_output_get(struct output_device *od) -+{ -+ return vo_status; -+} -+ -+static int lcd_video_output_set(struct output_device *od) -+{ -+ int i; -+ unsigned long status; -+ -+ status = !!od->request_state; -+ -+ if (status == 0) { -+ /* Set the current status as off */ -+ vo_status = 0; -+ /* Turn off the backlight */ -+ set_gpio_output_low(11); -+ for (i = 0; i < 0x500; i++) -+ delay(); -+ /* Turn off the LCD */ -+ set_gpio_output_high(8); -+ } else { -+ /* Turn on the LCD */ -+ set_gpio_output_low(8); -+ for (i = 0; i < 0x500; i++) -+ delay(); -+ /* Turn on the backlight */ -+ set_gpio_output_high(11); -+ /* Set the current status as on */ -+ vo_status = 1; -+ } -+ -+ return 0; -+} -+ -+static struct output_properties lcd_output_properties = { -+ .set_state = lcd_video_output_set, -+ .get_status = lcd_video_output_get, -+}; -+ -+static struct output_device *lcd_output_dev; -+ -+static void lynloong_lcd_vo_set(int status) -+{ -+ lcd_output_dev->request_state = status; -+ lcd_video_output_set(lcd_output_dev); -+} -+ -+static int lynloong_vo_init(void) -+{ -+ int ret; -+ -+ /* Register video output device: lcd */ -+ lcd_output_dev = video_output_register("LCD", NULL, NULL, -+ &lcd_output_properties); -+ -+ if (IS_ERR(lcd_output_dev)) { -+ ret = PTR_ERR(lcd_output_dev); -+ lcd_output_dev = NULL; -+ return ret; -+ } -+ /* Ensure LCD is on by default */ -+ lynloong_lcd_vo_set(1); -+ -+ return 0; -+} -+ -+static void lynloong_vo_exit(void) -+{ -+ if (lcd_output_dev) { -+ video_output_unregister(lcd_output_dev); -+ lcd_output_dev = NULL; -+ } -+} -+ -+/* suspend support */ -+ -+#ifdef CONFIG_PM -+ -+static u32 smb_base; -+ -+/* I2C operations */ -+ -+static int i2c_wait(void) -+{ -+ char c; -+ int i; -+ -+ udelay(1000); -+ for (i = 0; i < 20; i++) { -+ c = inb(smb_base | SMB_STS); -+ if (c & (SMB_STS_BER | SMB_STS_NEGACK)) -+ return -1; -+ if (c & SMB_STS_SDAST) -+ return 0; -+ udelay(100); -+ } -+ return -2; -+} -+ -+static void i2c_read_single(int addr, int regNo, char *value) -+{ -+ unsigned char c; -+ -+ /* Start condition */ -+ c = inb(smb_base | SMB_CTRL1); -+ outb(c | SMB_CTRL1_START, smb_base | SMB_CTRL1); -+ i2c_wait(); -+ -+ /* Send slave address */ -+ outb(addr & 0xfe, smb_base | SMB_SDA); -+ i2c_wait(); -+ -+ /* Acknowledge smbus */ -+ c = inb(smb_base | SMB_CTRL1); -+ outb(c | SMB_CTRL1_ACK, smb_base | SMB_CTRL1); -+ -+ /* Send register index */ -+ outb(regNo, smb_base | SMB_SDA); -+ i2c_wait(); -+ -+ /* Acknowledge smbus */ -+ c = inb(smb_base | SMB_CTRL1); -+ outb(c | SMB_CTRL1_ACK, smb_base | SMB_CTRL1); -+ -+ /* Start condition again */ -+ c = inb(smb_base | SMB_CTRL1); -+ outb(c | SMB_CTRL1_START, smb_base | SMB_CTRL1); -+ i2c_wait(); -+ -+ /* Send salve address again */ -+ outb(1 | addr, smb_base | SMB_SDA); -+ i2c_wait(); -+ -+ /* Acknowledge smbus */ -+ c = inb(smb_base | SMB_CTRL1); -+ outb(c | SMB_CTRL1_ACK, smb_base | SMB_CTRL1); -+ -+ /* Read data */ -+ *value = inb(smb_base | SMB_SDA); -+ -+ /* Stop condition */ -+ outb(SMB_CTRL1_STOP, smb_base | SMB_CTRL1); -+ i2c_wait(); -+} -+ -+static void i2c_write_single(int addr, int regNo, char value) -+{ -+ unsigned char c; -+ -+ /* Start condition */ -+ c = inb(smb_base | SMB_CTRL1); -+ outb(c | SMB_CTRL1_START, smb_base | SMB_CTRL1); -+ i2c_wait(); -+ /* Send slave address */ -+ outb(addr & 0xfe, smb_base | SMB_SDA); -+ i2c_wait();; -+ -+ /* Send register index */ -+ outb(regNo, smb_base | SMB_SDA); -+ i2c_wait(); -+ -+ /* Write data */ -+ outb(value, smb_base | SMB_SDA); -+ i2c_wait(); -+ /* Stop condition */ -+ outb(SMB_CTRL1_STOP, smb_base | SMB_CTRL1); -+ i2c_wait(); -+} -+ -+static void stop_clock(int clk_reg, int clk_sel) -+{ -+ u8 value; -+ -+ i2c_read_single(0xd3, clk_reg, &value); -+ value &= ~(1 << clk_sel); -+ i2c_write_single(0xd2, clk_reg, value); -+} -+ -+static void enable_clock(int clk_reg, int clk_sel) -+{ -+ u8 value; -+ -+ i2c_read_single(0xd3, clk_reg, &value); -+ value |= (1 << clk_sel); -+ i2c_write_single(0xd2, clk_reg, value); -+} -+ -+static char cached_clk_freq; -+static char cached_pci_fixed_freq; -+ -+static void decrease_clk_freq(void) -+{ -+ char value; -+ -+ i2c_read_single(0xd3, 1, &value); -+ cached_clk_freq = value; -+ -+ /* Select frequency by software */ -+ value |= (1 << 1); -+ /* CPU, 3V66, PCI : 100, 66, 33(1) */ -+ value |= (1 << 2); -+ i2c_write_single(0xd2, 1, value); -+ -+ /* Cache the pci frequency */ -+ i2c_read_single(0xd3, 14, &value); -+ cached_pci_fixed_freq = value; -+ -+ /* Enable PCI fix mode */ -+ value |= (1 << 5); -+ /* 3V66, PCI : 64MHz, 32MHz */ -+ value |= (1 << 3); -+ i2c_write_single(0xd2, 14, value); -+ -+} -+ -+static void resume_clk_freq(void) -+{ -+ i2c_write_single(0xd2, 1, cached_clk_freq); -+ i2c_write_single(0xd2, 14, cached_pci_fixed_freq); -+} -+ -+static void stop_clocks(void) -+{ -+ /* CPU Clock Register */ -+ stop_clock(2, 5); /* not used */ -+ stop_clock(2, 6); /* not used */ -+ stop_clock(2, 7); /* not used */ -+ -+ /* PCI Clock Register */ -+ stop_clock(3, 1); /* 8100 */ -+ stop_clock(3, 5); /* SIS */ -+ stop_clock(3, 0); /* not used */ -+ stop_clock(3, 6); /* not used */ -+ -+ /* PCI 48M Clock Register */ -+ stop_clock(4, 6); /* USB grounding */ -+ stop_clock(4, 5); /* REF(5536_14M) */ -+ -+ /* 3V66 Control Register */ -+ stop_clock(5, 0); /* VCH_CLK..., grounding */ -+} -+ -+static void enable_clocks(void) -+{ -+ enable_clock(3, 1); /* 8100 */ -+ enable_clock(3, 5); /* SIS */ -+ -+ enable_clock(4, 6); -+ enable_clock(4, 5); /* REF(5536_14M) */ -+ -+ enable_clock(5, 0); /* VCH_CLOCK, grounding */ -+} -+ -+static int lynloong_suspend(struct device *dev) -+{ -+ /* Disable AMP */ -+ set_gpio_output_high(6); -+ /* Turn off LCD */ -+ lynloong_lcd_vo_set(0); -+ -+ /* Stop the clocks of some devices */ -+ stop_clocks(); -+ -+ /* Decrease the external clock frequency */ -+ decrease_clk_freq(); -+ -+ return 0; -+} -+ -+static int lynloong_resume(struct device *dev) -+{ -+ /* Turn on the LCD */ -+ lynloong_lcd_vo_set(1); -+ -+ /* Resume clock frequency, enable the relative clocks */ -+ resume_clk_freq(); -+ enable_clocks(); -+ -+ /* Enable AMP */ -+ set_gpio_output_low(6); -+ -+ return 0; -+} -+ -+static const SIMPLE_DEV_PM_OPS(lynloong_pm_ops, lynloong_suspend, -+ lynloong_resume); -+#endif /* !CONFIG_PM */ -+ -+static struct platform_device_id platform_device_ids[] = { -+ { -+ .name = "lynloong_pc", -+ }, -+ {} -+}; -+ -+MODULE_DEVICE_TABLE(platform, platform_device_ids); -+ -+static struct platform_driver platform_driver = { -+ .driver = { -+ .name = "lynloong_pc", -+ .owner = THIS_MODULE, -+#ifdef CONFIG_PM -+ .pm = &lynloong_pm_ops, -+#endif -+ }, -+ .id_table = platform_device_ids, -+}; -+ -+static int __init lynloong_init(void) -+{ -+ int ret; -+ -+ pr_info("Load LynLoong Platform Specific Driver.\n"); -+ -+ /* Register platform stuff */ -+ ret = platform_driver_register(&platform_driver); -+ if (ret) { -+ pr_err("Fail to register lynloong platform driver.\n"); -+ return ret; -+ } -+ -+ ret = lynloong_backlight_init(); -+ if (ret) { -+ pr_err("Fail to register lynloong backlight driver.\n"); -+ return ret; -+ } -+ -+ ret = lynloong_vo_init(); -+ if (ret) { -+ pr_err("Fail to register lynloong backlight driver.\n"); -+ lynloong_vo_exit(); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static void __exit lynloong_exit(void) -+{ -+ lynloong_vo_exit(); -+ lynloong_backlight_exit(); -+ platform_driver_unregister(&platform_driver); -+ -+ pr_info("Unload LynLoong Platform Specific Driver.\n"); -+} -+ -+module_init(lynloong_init); -+module_exit(lynloong_exit); -+ -+MODULE_AUTHOR("Wu Zhangjin <wuzhangjin@gmail.com>; Xiang Yu <xiangy@lemote.com>"); -+MODULE_DESCRIPTION("LynLoong PC driver"); -+MODULE_LICENSE("GPL"); -diff -Nur linux-2.6.36.orig/drivers/platform/mips/yeeloong_ecrom.c linux-2.6.36/drivers/platform/mips/yeeloong_ecrom.c ---- linux-2.6.36.orig/drivers/platform/mips/yeeloong_ecrom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.36/drivers/platform/mips/yeeloong_ecrom.c 2010-11-18 11:47:59.000000000 +0100 -@@ -0,0 +1,943 @@ -+/* -+ * Driver for flushing/dumping ROM of EC on YeeLoong laptop -+ * -+ * Copyright (C) 2009 Lemote Inc. -+ * Author: liujl <liujl@lemote.com> -+ * -+ * NOTE : -+ * The EC resources accessing and programming are supported. -+ */ -+ -+#include <linux/proc_fs.h> -+#include <linux/miscdevice.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+ -+#include <ec_kb3310b.h> -+ -+#define EC_MISC_DEV "ec_misc" -+#define EC_IOC_MAGIC 'E' -+ -+/* ec registers range */ -+#define EC_MAX_REGADDR 0xFFFF -+#define EC_MIN_REGADDR 0xF000 -+#define EC_RAM_ADDR 0xF800 -+ -+/* version burned address */ -+#define VER_ADDR 0xf7a1 -+#define VER_MAX_SIZE 7 -+#define EC_ROM_MAX_SIZE 0x10000 -+ -+/* ec internal register */ -+#define REG_POWER_MODE 0xF710 -+#define FLAG_NORMAL_MODE 0x00 -+#define FLAG_IDLE_MODE 0x01 -+#define FLAG_RESET_MODE 0x02 -+ -+/* ec update program flag */ -+#define PROGRAM_FLAG_NONE 0x00 -+#define PROGRAM_FLAG_IE 0x01 -+#define PROGRAM_FLAG_ROM 0x02 -+ -+/* XBI relative registers */ -+#define REG_XBISEG0 0xFEA0 -+#define REG_XBISEG1 0xFEA1 -+#define REG_XBIRSV2 0xFEA2 -+#define REG_XBIRSV3 0xFEA3 -+#define REG_XBIRSV4 0xFEA4 -+#define REG_XBICFG 0xFEA5 -+#define REG_XBICS 0xFEA6 -+#define REG_XBIWE 0xFEA7 -+#define REG_XBISPIA0 0xFEA8 -+#define REG_XBISPIA1 0xFEA9 -+#define REG_XBISPIA2 0xFEAA -+#define REG_XBISPIDAT 0xFEAB -+#define REG_XBISPICMD 0xFEAC -+#define REG_XBISPICFG 0xFEAD -+#define REG_XBISPIDATR 0xFEAE -+#define REG_XBISPICFG2 0xFEAF -+ -+/* commands definition for REG_XBISPICMD */ -+#define SPICMD_WRITE_STATUS 0x01 -+#define SPICMD_BYTE_PROGRAM 0x02 -+#define SPICMD_READ_BYTE 0x03 -+#define SPICMD_WRITE_DISABLE 0x04 -+#define SPICMD_READ_STATUS 0x05 -+#define SPICMD_WRITE_ENABLE 0x06 -+#define SPICMD_HIGH_SPEED_READ 0x0B -+#define SPICMD_POWER_DOWN 0xB9 -+#define SPICMD_SST_EWSR 0x50 -+#define SPICMD_SST_SEC_ERASE 0x20 -+#define SPICMD_SST_BLK_ERASE 0x52 -+#define SPICMD_SST_CHIP_ERASE 0x60 -+#define SPICMD_FRDO 0x3B -+#define SPICMD_SEC_ERASE 0xD7 -+#define SPICMD_BLK_ERASE 0xD8 -+#define SPICMD_CHIP_ERASE 0xC7 -+ -+/* bits definition for REG_XBISPICFG */ -+#define SPICFG_AUTO_CHECK 0x01 -+#define SPICFG_SPI_BUSY 0x02 -+#define SPICFG_DUMMY_READ 0x04 -+#define SPICFG_EN_SPICMD 0x08 -+#define SPICFG_LOW_SPICS 0x10 -+#define SPICFG_EN_SHORT_READ 0x20 -+#define SPICFG_EN_OFFSET_READ 0x40 -+#define SPICFG_EN_FAST_READ 0x80 -+ -+/* watchdog timer registers */ -+#define REG_WDTCFG 0xfe80 -+#define REG_WDTPF 0xfe81 -+#define REG_WDT 0xfe82 -+ -+/* lpc configure register */ -+#define REG_LPCCFG 0xfe95 -+ -+/* 8051 reg */ -+#define REG_PXCFG 0xff14 -+ -+/* Fan register in KB3310 */ -+#define REG_ECFAN_SPEED_LEVEL 0xf4e4 -+#define REG_ECFAN_SWITCH 0xf4d2 -+ -+/* the ec flash rom id number */ -+#define EC_ROM_PRODUCT_ID_SPANSION 0x01 -+#define EC_ROM_PRODUCT_ID_MXIC 0xC2 -+#define EC_ROM_PRODUCT_ID_AMIC 0x37 -+#define EC_ROM_PRODUCT_ID_EONIC 0x1C -+ -+/* misc ioctl operations */ -+#define IOCTL_RDREG _IOR(EC_IOC_MAGIC, 1, int) -+#define IOCTL_WRREG _IOW(EC_IOC_MAGIC, 2, int) -+#define IOCTL_READ_EC _IOR(EC_IOC_MAGIC, 3, int) -+#define IOCTL_PROGRAM_IE _IOW(EC_IOC_MAGIC, 4, int) -+#define IOCTL_PROGRAM_EC _IOW(EC_IOC_MAGIC, 5, int) -+ -+/* start address for programming of EC content or IE */ -+/* ec running code start address */ -+#define EC_START_ADDR 0x00000000 -+/* ec information element storing address */ -+#define IE_START_ADDR 0x00020000 -+ -+/* EC state */ -+#define EC_STATE_IDLE 0x00 /* ec in idle state */ -+#define EC_STATE_BUSY 0x01 /* ec in busy state */ -+ -+/* timeout value for programming */ -+#define EC_FLASH_TIMEOUT 0x1000 /* ec program timeout */ -+/* command checkout timeout including cmd to port or state flag check */ -+#define EC_CMD_TIMEOUT 0x1000 -+#define EC_SPICMD_STANDARD_TIMEOUT (4 * 1000) /* unit : us */ -+#define EC_MAX_DELAY_UNIT (10) /* every time for polling */ -+#define SPI_FINISH_WAIT_TIME 10 -+/* EC content max size */ -+#define EC_CONTENT_MAX_SIZE (64 * 1024) -+#define IE_CONTENT_MAX_SIZE (0x100000 - IE_START_ADDR) -+ -+/* the register operation access struct */ -+struct ec_reg { -+ u32 addr; /* the address of kb3310 registers */ -+ u8 val; /* the register value */ -+}; -+ -+struct ec_info { -+ u32 start_addr; -+ u32 size; -+ u8 *buf; -+}; -+ -+/* open for using rom protection action */ -+#define EC_ROM_PROTECTION -+ -+/* enable the chip reset mode */ -+static int ec_init_reset_mode(void) -+{ -+ int timeout; -+ unsigned char status = 0; -+ int ret = 0; -+ -+ /* make chip goto reset mode */ -+ ret = ec_query_seq(CMD_INIT_RESET_MODE); -+ if (ret < 0) { -+ printk(KERN_ERR "ec init reset mode failed.\n"); -+ goto out; -+ } -+ -+ /* make the action take active */ -+ timeout = EC_CMD_TIMEOUT; -+ status = ec_read(REG_POWER_MODE) & FLAG_RESET_MODE; -+ while (timeout--) { -+ if (status) { -+ udelay(EC_REG_DELAY); -+ break; -+ } -+ status = ec_read(REG_POWER_MODE) & FLAG_RESET_MODE; -+ udelay(EC_REG_DELAY); -+ } -+ if (timeout <= 0) { -+ printk(KERN_ERR "ec rom fixup : can't check reset status.\n"); -+ ret = -EINVAL; -+ } else -+ printk(KERN_INFO "(%d/%d)reset 0xf710 : 0x%x\n", timeout, -+ EC_CMD_TIMEOUT - timeout, status); -+ -+ /* set MCU to reset mode */ -+ udelay(EC_REG_DELAY); -+ status = ec_read(REG_PXCFG); -+ status |= (1 << 0); -+ ec_write(REG_PXCFG, status); -+ udelay(EC_REG_DELAY); -+ -+ /* disable FWH/LPC */ -+ udelay(EC_REG_DELAY); -+ status = ec_read(REG_LPCCFG); -+ status &= ~(1 << 7); -+ ec_write(REG_LPCCFG, status); -+ udelay(EC_REG_DELAY); -+ -+ printk(KERN_INFO "entering reset mode ok..............\n"); -+ -+ out: -+ return ret; -+} -+ -+/* make ec exit from reset mode */ -+static void ec_exit_reset_mode(void) -+{ -+ unsigned char regval; -+ -+ udelay(EC_REG_DELAY); -+ regval = ec_read(REG_LPCCFG); -+ regval |= (1 << 7); -+ ec_write(REG_LPCCFG, regval); -+ regval = ec_read(REG_PXCFG); -+ regval &= ~(1 << 0); -+ ec_write(REG_PXCFG, regval); -+ printk(KERN_INFO "exit reset mode ok..................\n"); -+ -+ return; -+} -+ -+/* make ec disable WDD */ -+static void ec_disable_WDD(void) -+{ -+ unsigned char status; -+ -+ udelay(EC_REG_DELAY); -+ status = ec_read(REG_WDTCFG); -+ ec_write(REG_WDTPF, 0x03); -+ ec_write(REG_WDTCFG, (status & 0x80) | 0x48); -+ printk(KERN_INFO "Disable WDD ok..................\n"); -+ -+ return; -+} -+ -+/* make ec enable WDD */ -+static void ec_enable_WDD(void) -+{ -+ unsigned char status; -+ -+ udelay(EC_REG_DELAY); -+ status = ec_read(REG_WDTCFG); -+ ec_write(REG_WDT, 0x28); /* set WDT 5sec(0x28) */ -+ ec_write(REG_WDTCFG, (status & 0x80) | 0x03); -+ printk(KERN_INFO "Enable WDD ok..................\n"); -+ -+ return; -+} -+ -+/* make ec goto idle mode */ -+static int ec_init_idle_mode(void) -+{ -+ int timeout; -+ unsigned char status = 0; -+ int ret = 0; -+ -+ ec_query_seq(CMD_INIT_IDLE_MODE); -+ -+ /* make the action take active */ -+ timeout = EC_CMD_TIMEOUT; -+ status = ec_read(REG_POWER_MODE) & FLAG_IDLE_MODE; -+ while (timeout--) { -+ if (status) { -+ udelay(EC_REG_DELAY); -+ break; -+ } -+ status = ec_read(REG_POWER_MODE) & FLAG_IDLE_MODE; -+ udelay(EC_REG_DELAY); -+ } -+ if (timeout <= 0) { -+ printk(KERN_ERR "ec rom fixup : can't check out the status.\n"); -+ ret = -EINVAL; -+ } else -+ printk(KERN_INFO "(%d/%d)0xf710 : 0x%x\n", timeout, -+ EC_CMD_TIMEOUT - timeout, ec_read(REG_POWER_MODE)); -+ -+ printk(KERN_INFO "entering idle mode ok...................\n"); -+ -+ return ret; -+} -+ -+/* make ec exit from idle mode */ -+static int ec_exit_idle_mode(void) -+{ -+ -+ ec_query_seq(CMD_EXIT_IDLE_MODE); -+ -+ printk(KERN_INFO "exit idle mode ok...................\n"); -+ -+ return 0; -+} -+ -+static int ec_instruction_cycle(void) -+{ -+ unsigned long timeout; -+ int ret = 0; -+ -+ timeout = EC_FLASH_TIMEOUT; -+ while (timeout-- >= 0) { -+ if (!(ec_read(REG_XBISPICFG) & SPICFG_SPI_BUSY)) -+ break; -+ } -+ if (timeout <= 0) { -+ printk(KERN_ERR -+ "EC_INSTRUCTION_CYCLE : timeout for check flag.\n"); -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ out: -+ return ret; -+} -+ -+/* To see if the ec is in busy state or not. */ -+static inline int ec_flash_busy(unsigned long timeout) -+{ -+ /* assurance the first command be going to rom */ -+ if (ec_instruction_cycle() < 0) -+ return EC_STATE_BUSY; -+#if 1 -+ timeout = timeout / EC_MAX_DELAY_UNIT; -+ while (timeout-- > 0) { -+ /* check the rom's status of busy flag */ -+ ec_write(REG_XBISPICMD, SPICMD_READ_STATUS); -+ if (ec_instruction_cycle() < 0) -+ return EC_STATE_BUSY; -+ if ((ec_read(REG_XBISPIDAT) & 0x01) == 0x00) -+ return EC_STATE_IDLE; -+ udelay(EC_MAX_DELAY_UNIT); -+ } -+ if (timeout <= 0) { -+ printk(KERN_ERR -+ "EC_FLASH_BUSY : timeout for check rom flag.\n"); -+ return EC_STATE_BUSY; -+ } -+#else -+ /* check the rom's status of busy flag */ -+ ec_write(REG_XBISPICMD, SPICMD_READ_STATUS); -+ if (ec_instruction_cycle() < 0) -+ return EC_STATE_BUSY; -+ -+ timeout = timeout / EC_MAX_DELAY_UNIT; -+ while (timeout-- > 0) { -+ if ((ec_read(REG_XBISPIDAT) & 0x01) == 0x00) -+ return EC_STATE_IDLE; -+ udelay(EC_MAX_DELAY_UNIT); -+ } -+ if (timeout <= 0) { -+ printk(KERN_ERR -+ "EC_FLASH_BUSY : timeout for check rom flag.\n"); -+ return EC_STATE_BUSY; -+ } -+#endif -+ -+ return EC_STATE_IDLE; -+} -+ -+static int rom_instruction_cycle(unsigned char cmd) -+{ -+ unsigned long timeout = 0; -+ -+ switch (cmd) { -+ case SPICMD_READ_STATUS: -+ case SPICMD_WRITE_ENABLE: -+ case SPICMD_WRITE_DISABLE: -+ case SPICMD_READ_BYTE: -+ case SPICMD_HIGH_SPEED_READ: -+ timeout = 0; -+ break; -+ case SPICMD_WRITE_STATUS: -+ timeout = 300 * 1000; -+ break; -+ case SPICMD_BYTE_PROGRAM: -+ timeout = 5 * 1000; -+ break; -+ case SPICMD_SST_SEC_ERASE: -+ case SPICMD_SEC_ERASE: -+ timeout = 1000 * 1000; -+ break; -+ case SPICMD_SST_BLK_ERASE: -+ case SPICMD_BLK_ERASE: -+ timeout = 3 * 1000 * 1000; -+ break; -+ case SPICMD_SST_CHIP_ERASE: -+ case SPICMD_CHIP_ERASE: -+ timeout = 20 * 1000 * 1000; -+ break; -+ default: -+ timeout = EC_SPICMD_STANDARD_TIMEOUT; -+ } -+ if (timeout == 0) -+ return ec_instruction_cycle(); -+ if (timeout < EC_SPICMD_STANDARD_TIMEOUT) -+ timeout = EC_SPICMD_STANDARD_TIMEOUT; -+ -+ return ec_flash_busy(timeout); -+} -+ -+/* delay for start/stop action */ -+static void delay_spi(int n) -+{ -+ while (n--) -+ inb(EC_IO_PORT_HIGH); -+} -+ -+/* start the action to spi rom function */ -+static void ec_start_spi(void) -+{ -+ unsigned char val; -+ -+ delay_spi(SPI_FINISH_WAIT_TIME); -+ val = ec_read(REG_XBISPICFG) | SPICFG_EN_SPICMD | SPICFG_AUTO_CHECK; -+ ec_write(REG_XBISPICFG, val); -+ delay_spi(SPI_FINISH_WAIT_TIME); -+} -+ -+/* stop the action to spi rom function */ -+static void ec_stop_spi(void) -+{ -+ unsigned char val; -+ -+ delay_spi(SPI_FINISH_WAIT_TIME); -+ val = -+ ec_read(REG_XBISPICFG) & (~(SPICFG_EN_SPICMD | SPICFG_AUTO_CHECK)); -+ ec_write(REG_XBISPICFG, val); -+ delay_spi(SPI_FINISH_WAIT_TIME); -+} -+ -+/* read one byte from xbi interface */ -+static int ec_read_byte(unsigned int addr, unsigned char *byte) -+{ -+ int ret = 0; -+ -+ /* enable spicmd writing. */ -+ ec_start_spi(); -+ -+ /* enable write spi flash */ -+ ec_write(REG_XBISPICMD, SPICMD_WRITE_ENABLE); -+ if (rom_instruction_cycle(SPICMD_WRITE_ENABLE) == EC_STATE_BUSY) { -+ printk(KERN_ERR "EC_READ_BYTE : SPICMD_WRITE_ENABLE failed.\n"); -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ /* write the address */ -+ ec_write(REG_XBISPIA2, (addr & 0xff0000) >> 16); -+ ec_write(REG_XBISPIA1, (addr & 0x00ff00) >> 8); -+ ec_write(REG_XBISPIA0, (addr & 0x0000ff) >> 0); -+ /* start action */ -+ ec_write(REG_XBISPICMD, SPICMD_HIGH_SPEED_READ); -+ if (rom_instruction_cycle(SPICMD_HIGH_SPEED_READ) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_READ_BYTE : SPICMD_HIGH_SPEED_READ failed.\n"); -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ *byte = ec_read(REG_XBISPIDAT); -+ -+ out: -+ /* disable spicmd writing. */ -+ ec_stop_spi(); -+ -+ return ret; -+} -+ -+/* write one byte to ec rom */ -+static int ec_write_byte(unsigned int addr, unsigned char byte) -+{ -+ int ret = 0; -+ -+ /* enable spicmd writing. */ -+ ec_start_spi(); -+ -+ /* enable write spi flash */ -+ ec_write(REG_XBISPICMD, SPICMD_WRITE_ENABLE); -+ if (rom_instruction_cycle(SPICMD_WRITE_ENABLE) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_WRITE_BYTE : SPICMD_WRITE_ENABLE failed.\n"); -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ /* write the address */ -+ ec_write(REG_XBISPIA2, (addr & 0xff0000) >> 16); -+ ec_write(REG_XBISPIA1, (addr & 0x00ff00) >> 8); -+ ec_write(REG_XBISPIA0, (addr & 0x0000ff) >> 0); -+ ec_write(REG_XBISPIDAT, byte); -+ /* start action */ -+ ec_write(REG_XBISPICMD, SPICMD_BYTE_PROGRAM); -+ if (rom_instruction_cycle(SPICMD_BYTE_PROGRAM) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_WRITE_BYTE : SPICMD_BYTE_PROGRAM failed.\n"); -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ out: -+ /* disable spicmd writing. */ -+ ec_stop_spi(); -+ -+ return ret; -+} -+ -+/* unprotect SPI ROM */ -+/* EC_ROM_unprotect function code */ -+static int EC_ROM_unprotect(void) -+{ -+ unsigned char status; -+ -+ /* enable write spi flash */ -+ ec_write(REG_XBISPICMD, SPICMD_WRITE_ENABLE); -+ if (rom_instruction_cycle(SPICMD_WRITE_ENABLE) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_UNIT_ERASE : SPICMD_WRITE_ENABLE failed.\n"); -+ return 1; -+ } -+ -+ /* unprotect the status register of rom */ -+ ec_write(REG_XBISPICMD, SPICMD_READ_STATUS); -+ if (rom_instruction_cycle(SPICMD_READ_STATUS) == EC_STATE_BUSY) { -+ printk(KERN_ERR "EC_UNIT_ERASE : SPICMD_READ_STATUS failed.\n"); -+ return 1; -+ } -+ status = ec_read(REG_XBISPIDAT); -+ ec_write(REG_XBISPIDAT, status & 0x02); -+ if (ec_instruction_cycle() < 0) { -+ printk(KERN_ERR "EC_UNIT_ERASE : write status value failed.\n"); -+ return 1; -+ } -+ -+ ec_write(REG_XBISPICMD, SPICMD_WRITE_STATUS); -+ if (rom_instruction_cycle(SPICMD_WRITE_STATUS) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_UNIT_ERASE : SPICMD_WRITE_STATUS failed.\n"); -+ return 1; -+ } -+ -+ /* enable write spi flash */ -+ ec_write(REG_XBISPICMD, SPICMD_WRITE_ENABLE); -+ if (rom_instruction_cycle(SPICMD_WRITE_ENABLE) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_UNIT_ERASE : SPICMD_WRITE_ENABLE failed.\n"); -+ return 1; -+ } -+ -+ return 0; -+} -+ -+/* erase one block or chip or sector as needed */ -+static int ec_unit_erase(unsigned char erase_cmd, unsigned int addr) -+{ -+ unsigned char status; -+ int ret = 0, i = 0; -+ int unprotect_count = 3; -+ int check_flag = 0; -+ -+ /* enable spicmd writing. */ -+ ec_start_spi(); -+ -+#ifdef EC_ROM_PROTECTION -+ /* added for re-check SPICMD_READ_STATUS */ -+ while (unprotect_count-- > 0) { -+ if (EC_ROM_unprotect()) { -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ /* first time:500ms --> 5.5sec -->10.5sec */ -+ for (i = 0; i < ((2 - unprotect_count) * 100 + 10); i++) -+ udelay(50000); -+ ec_write(REG_XBISPICMD, SPICMD_READ_STATUS); -+ if (rom_instruction_cycle(SPICMD_READ_STATUS) -+ == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_PROGRAM_ROM : SPICMD_READ_STATUS failed.\n"); -+ } else { -+ status = ec_read(REG_XBISPIDAT); -+ printk(KERN_INFO "Read unprotect status : 0x%x\n", -+ status); -+ if ((status & 0x1C) == 0x00) { -+ printk(KERN_INFO -+ "Read unprotect status OK1 : 0x%x\n", -+ status & 0x1C); -+ check_flag = 1; -+ break; -+ } -+ } -+ } -+ -+ if (!check_flag) { -+ printk(KERN_INFO "SPI ROM unprotect fail.\n"); -+ return 1; -+ } -+#endif -+ -+ /* block address fill */ -+ if (erase_cmd == SPICMD_BLK_ERASE) { -+ ec_write(REG_XBISPIA2, (addr & 0x00ff0000) >> 16); -+ ec_write(REG_XBISPIA1, (addr & 0x0000ff00) >> 8); -+ ec_write(REG_XBISPIA0, (addr & 0x000000ff) >> 0); -+ } -+ -+ /* erase the whole chip first */ -+ ec_write(REG_XBISPICMD, erase_cmd); -+ if (rom_instruction_cycle(erase_cmd) == EC_STATE_BUSY) { -+ printk(KERN_ERR "EC_UNIT_ERASE : erase failed.\n"); -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ out: -+ /* disable spicmd writing. */ -+ ec_stop_spi(); -+ -+ return ret; -+} -+ -+/* update the whole rom content with H/W mode -+ * PLEASE USING ec_unit_erase() FIRSTLY -+ */ -+static int ec_program_rom(struct ec_info *info, int flag) -+{ -+ unsigned int addr = 0; -+ unsigned long size = 0; -+ unsigned char *ptr = NULL; -+ unsigned char data; -+ unsigned char val = 0; -+ int ret = 0; -+ int i, j; -+ unsigned char status; -+ -+ /* modify for program serial No. -+ * set IE_START_ADDR & use idle mode, -+ * disable WDD -+ */ -+ if (flag == PROGRAM_FLAG_ROM) { -+ ret = ec_init_reset_mode(); -+ addr = info->start_addr + EC_START_ADDR; -+ printk(KERN_INFO "PROGRAM_FLAG_ROM..............\n"); -+ } else if (flag == PROGRAM_FLAG_IE) { -+ ret = ec_init_idle_mode(); -+ ec_disable_WDD(); -+ addr = info->start_addr + IE_START_ADDR; -+ printk(KERN_INFO "PROGRAM_FLAG_IE..............\n"); -+ } else { -+ return 0; -+ } -+ -+ if (ret < 0) { -+ if (flag == PROGRAM_FLAG_IE) -+ ec_enable_WDD(); -+ return ret; -+ } -+ -+ size = info->size; -+ ptr = info->buf; -+ printk(KERN_INFO "starting update ec ROM..............\n"); -+ -+ ret = ec_unit_erase(SPICMD_BLK_ERASE, addr); -+ if (ret) { -+ printk(KERN_ERR "program ec : erase block failed.\n"); -+ goto out; -+ } -+ printk(KERN_ERR "program ec : erase block OK.\n"); -+ -+ i = 0; -+ while (i < size) { -+ data = *(ptr + i); -+ ec_write_byte(addr, data); -+ ec_read_byte(addr, &val); -+ if (val != data) { -+ ec_write_byte(addr, data); -+ ec_read_byte(addr, &val); -+ if (val != data) { -+ printk(KERN_INFO -+ "EC : Second flash program failed at:\t"); -+ printk(KERN_INFO -+ "addr : 0x%x, source : 0x%x, dest: 0x%x\n", -+ addr, data, val); -+ printk(KERN_INFO "This should not happen... STOP\n"); -+ break; -+ } -+ } -+ i++; -+ addr++; -+ } -+ -+#ifdef EC_ROM_PROTECTION -+ /* we should start spi access firstly */ -+ ec_start_spi(); -+ -+ /* enable write spi flash */ -+ ec_write(REG_XBISPICMD, SPICMD_WRITE_ENABLE); -+ if (rom_instruction_cycle(SPICMD_WRITE_ENABLE) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_PROGRAM_ROM : SPICMD_WRITE_ENABLE failed.\n"); -+ goto out1; -+ } -+ -+ /* protect the status register of rom */ -+ ec_write(REG_XBISPICMD, SPICMD_READ_STATUS); -+ if (rom_instruction_cycle(SPICMD_READ_STATUS) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_PROGRAM_ROM : SPICMD_READ_STATUS failed.\n"); -+ goto out1; -+ } -+ status = ec_read(REG_XBISPIDAT); -+ -+ ec_write(REG_XBISPIDAT, status | 0x1C); -+ if (ec_instruction_cycle() < 0) { -+ printk(KERN_ERR -+ "EC_PROGRAM_ROM : write status value failed.\n"); -+ goto out1; -+ } -+ -+ ec_write(REG_XBISPICMD, SPICMD_WRITE_STATUS); -+ if (rom_instruction_cycle(SPICMD_WRITE_STATUS) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_PROGRAM_ROM : SPICMD_WRITE_STATUS failed.\n"); -+ goto out1; -+ } -+#endif -+ -+ /* disable the write action to spi rom */ -+ ec_write(REG_XBISPICMD, SPICMD_WRITE_DISABLE); -+ if (rom_instruction_cycle(SPICMD_WRITE_DISABLE) == EC_STATE_BUSY) { -+ printk(KERN_ERR -+ "EC_PROGRAM_ROM : SPICMD_WRITE_DISABLE failed.\n"); -+ goto out1; -+ } -+ -+ out1: -+ /* we should stop spi access firstly */ -+ ec_stop_spi(); -+ out: -+ /* for security */ -+ for (j = 0; j < 2000; j++) -+ udelay(1000); -+ -+ /* modify for program serial No. -+ * after program No exit idle mode -+ * and enable WDD -+ */ -+ if (flag == PROGRAM_FLAG_ROM) { -+ /* exit from the reset mode */ -+ ec_exit_reset_mode(); -+ } else { -+ /* ec exit from idle mode */ -+ ret = ec_exit_idle_mode(); -+ ec_enable_WDD(); -+ if (ret < 0) -+ return ret; -+ } -+ -+ return 0; -+} -+ -+/* ioctl */ -+static int misc_ioctl(struct inode *inode, struct file *filp, u_int cmd, -+ u_long arg) -+{ -+ struct ec_info ecinfo; -+ void __user *ptr = (void __user *)arg; -+ struct ec_reg *ecreg = (struct ec_reg *)(filp->private_data); -+ int ret = 0; -+ -+ switch (cmd) { -+ case IOCTL_RDREG: -+ ret = copy_from_user(ecreg, ptr, sizeof(struct ec_reg)); -+ if (ret) { -+ printk(KERN_ERR "reg read : copy from user error.\n"); -+ return -EFAULT; -+ } -+ if ((ecreg->addr > EC_MAX_REGADDR) -+ || (ecreg->addr < EC_MIN_REGADDR)) { -+ printk(KERN_ERR -+ "reg read : out of register address range.\n"); -+ return -EINVAL; -+ } -+ ecreg->val = ec_read(ecreg->addr); -+ ret = copy_to_user(ptr, ecreg, sizeof(struct ec_reg)); -+ if (ret) { -+ printk(KERN_ERR "reg read : copy to user error.\n"); -+ return -EFAULT; -+ } -+ break; -+ case IOCTL_WRREG: -+ ret = copy_from_user(ecreg, ptr, sizeof(struct ec_reg)); -+ if (ret) { -+ printk(KERN_ERR "reg write : copy from user error.\n"); -+ return -EFAULT; -+ } -+ if ((ecreg->addr > EC_MAX_REGADDR) -+ || (ecreg->addr < EC_MIN_REGADDR)) { -+ printk(KERN_ERR -+ "reg write : out of register address range.\n"); -+ return -EINVAL; -+ } -+ ec_write(ecreg->addr, ecreg->val); -+ break; -+ case IOCTL_READ_EC: -+ ret = copy_from_user(ecreg, ptr, sizeof(struct ec_reg)); -+ if (ret) { -+ printk(KERN_ERR "spi read : copy from user error.\n"); -+ return -EFAULT; -+ } -+ if ((ecreg->addr > EC_RAM_ADDR) -+ && (ecreg->addr < EC_MAX_REGADDR)) { -+ printk(KERN_ERR -+ "spi read : out of register address range.\n"); -+ return -EINVAL; -+ } -+ ec_read_byte(ecreg->addr, &(ecreg->val)); -+ ret = copy_to_user(ptr, ecreg, sizeof(struct ec_reg)); -+ if (ret) { -+ printk(KERN_ERR "spi read : copy to user error.\n"); -+ return -EFAULT; -+ } -+ break; -+ case IOCTL_PROGRAM_IE: -+ ecinfo.start_addr = EC_START_ADDR; -+ ecinfo.size = EC_CONTENT_MAX_SIZE; -+ ecinfo.buf = (u8 *) kmalloc(ecinfo.size, GFP_KERNEL); -+ if (ecinfo.buf == NULL) { -+ printk(KERN_ERR "program ie : kmalloc failed.\n"); -+ return -ENOMEM; -+ } -+ ret = copy_from_user(ecinfo.buf, (u8 *) ptr, ecinfo.size); -+ if (ret) { -+ printk(KERN_ERR "program ie : copy from user error.\n"); -+ kfree(ecinfo.buf); -+ ecinfo.buf = NULL; -+ return -EFAULT; -+ } -+ -+ /* use ec_program_rom to write serial No */ -+ ec_program_rom(&ecinfo, PROGRAM_FLAG_IE); -+ -+ kfree(ecinfo.buf); -+ ecinfo.buf = NULL; -+ break; -+ case IOCTL_PROGRAM_EC: -+ ecinfo.start_addr = EC_START_ADDR; -+ if (get_user((ecinfo.size), (u32 *) ptr)) { -+ printk(KERN_ERR "program ec : get user error.\n"); -+ return -EFAULT; -+ } -+ if ((ecinfo.size) > EC_CONTENT_MAX_SIZE) { -+ printk(KERN_ERR "program ec : size out of limited.\n"); -+ return -EINVAL; -+ } -+ ecinfo.buf = (u8 *) kmalloc(ecinfo.size, GFP_KERNEL); -+ if (ecinfo.buf == NULL) { -+ printk(KERN_ERR "program ec : kmalloc failed.\n"); -+ return -ENOMEM; -+ } -+ ret = copy_from_user(ecinfo.buf, ((u8 *) ptr + 4), ecinfo.size); -+ if (ret) { -+ printk(KERN_ERR "program ec : copy from user error.\n"); -+ kfree(ecinfo.buf); -+ ecinfo.buf = NULL; -+ return -EFAULT; -+ } -+ -+ ec_program_rom(&ecinfo, PROGRAM_FLAG_ROM); -+ -+ kfree(ecinfo.buf); -+ ecinfo.buf = NULL; -+ break; -+ -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+static long misc_compat_ioctl(struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ return misc_ioctl(file->f_dentry->d_inode, file, cmd, arg); -+} -+ -+static int misc_open(struct inode *inode, struct file *filp) -+{ -+ struct ec_reg *ecreg = NULL; -+ ecreg = kmalloc(sizeof(struct ec_reg), GFP_KERNEL); -+ if (ecreg) -+ filp->private_data = ecreg; -+ -+ return ecreg ? 0 : -ENOMEM; -+} -+ -+static int misc_release(struct inode *inode, struct file *filp) -+{ -+ struct ec_reg *ecreg = (struct ec_reg *)(filp->private_data); -+ -+ filp->private_data = NULL; -+ kfree(ecreg); -+ -+ return 0; -+} -+ -+static const struct file_operations ecmisc_fops = { -+ .open = misc_open, -+ .release = misc_release, -+ .read = NULL, -+ .write = NULL, -+#ifdef CONFIG_64BIT -+ .compat_ioctl = misc_compat_ioctl, -+#else -+ .ioctl = misc_ioctl, -+#endif -+}; -+ -+static struct miscdevice ecmisc_device = { -+ .minor = MISC_DYNAMIC_MINOR, -+ .name = EC_MISC_DEV, -+ .fops = &ecmisc_fops -+}; -+ -+static int __init ecmisc_init(void) -+{ -+ int ret; -+ -+ printk(KERN_INFO "EC misc device init.\n"); -+ ret = misc_register(&ecmisc_device); -+ -+ return ret; -+} -+ -+static void __exit ecmisc_exit(void) -+{ -+ printk(KERN_INFO "EC misc device exit.\n"); -+ misc_deregister(&ecmisc_device); -+} -+ -+module_init(ecmisc_init); -+module_exit(ecmisc_exit); -+ -+MODULE_AUTHOR("liujl <liujl@lemote.com>"); -+MODULE_DESCRIPTION("Driver for flushing/dumping ROM of EC on YeeLoong laptop"); -+MODULE_LICENSE("GPL"); -diff -Nur linux-2.6.36.orig/drivers/platform/mips/yeeloong_laptop.c linux-2.6.36/drivers/platform/mips/yeeloong_laptop.c ---- linux-2.6.36.orig/drivers/platform/mips/yeeloong_laptop.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.36/drivers/platform/mips/yeeloong_laptop.c 2010-11-18 11:47:59.000000000 +0100 -@@ -0,0 +1,1200 @@ -+/* -+ * Driver for YeeLoong laptop extras -+ * -+ * Copyright (C) 2009 Lemote Inc. -+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>, Liu Junliang <liujl@lemote.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/err.h> -+#include <linux/platform_device.h> -+#include <linux/backlight.h> /* for backlight subdriver */ -+#include <linux/fb.h> -+#include <linux/hwmon.h> /* for hwmon subdriver */ -+#include <linux/hwmon-sysfs.h> -+#include <linux/video_output.h> /* for video output subdriver */ -+#include <linux/input.h> /* for hotkey subdriver */ -+#include <linux/input/sparse-keymap.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+#include <linux/power_supply.h> /* for AC & Battery subdriver */ -+ -+#include <cs5536/cs5536.h> -+ -+#include <loongson.h> /* for loongson_cmdline */ -+#include <ec_kb3310b.h> -+ -+/* common function */ -+#define EC_VER_LEN 64 -+ -+static int ec_version_before(char *version) -+{ -+ char *p, ec_ver[EC_VER_LEN]; -+ -+ p = strstr(loongson_cmdline, "EC_VER="); -+ if (!p) -+ memset(ec_ver, 0, EC_VER_LEN); -+ else { -+ strncpy(ec_ver, p, EC_VER_LEN); -+ p = strstr(ec_ver, " "); -+ if (p) -+ *p = '\0'; -+ } -+ -+ return (strncasecmp(ec_ver, version, 64) < 0); -+} -+ -+/* backlight subdriver */ -+#define MAX_BRIGHTNESS 8 -+ -+static int yeeloong_set_brightness(struct backlight_device *bd) -+{ -+ unsigned int level, current_level; -+ static unsigned int old_level; -+ -+ level = (bd->props.fb_blank == FB_BLANK_UNBLANK && -+ bd->props.power == FB_BLANK_UNBLANK) ? -+ bd->props.brightness : 0; -+ -+ level = SENSORS_LIMIT(level, 0, MAX_BRIGHTNESS); -+ -+ /* Avoid to modify the brightness when EC is tuning it */ -+ if (old_level != level) { -+ current_level = ec_read(REG_DISPLAY_BRIGHTNESS); -+ if (old_level == current_level) -+ ec_write(REG_DISPLAY_BRIGHTNESS, level); -+ old_level = level; -+ } -+ -+ return 0; -+} -+ -+static int yeeloong_get_brightness(struct backlight_device *bd) -+{ -+ return ec_read(REG_DISPLAY_BRIGHTNESS); -+} -+ -+static struct backlight_ops backlight_ops = { -+ .get_brightness = yeeloong_get_brightness, -+ .update_status = yeeloong_set_brightness, -+}; -+ -+static struct backlight_device *yeeloong_backlight_dev; -+ -+static int yeeloong_backlight_init(void) -+{ -+ int ret; -+ struct backlight_properties props; -+ -+ memset(&props, 0, sizeof(struct backlight_properties)); -+ props.max_brightness = MAX_BRIGHTNESS; -+ yeeloong_backlight_dev = backlight_device_register("backlight0", NULL, -+ NULL, &backlight_ops, &props); -+ -+ if (IS_ERR(yeeloong_backlight_dev)) { -+ ret = PTR_ERR(yeeloong_backlight_dev); -+ yeeloong_backlight_dev = NULL; -+ return ret; -+ } -+ -+ yeeloong_backlight_dev->props.brightness = -+ yeeloong_get_brightness(yeeloong_backlight_dev); -+ backlight_update_status(yeeloong_backlight_dev); -+ -+ return 0; -+} -+ -+static void yeeloong_backlight_exit(void) -+{ -+ if (yeeloong_backlight_dev) { -+ backlight_device_unregister(yeeloong_backlight_dev); -+ yeeloong_backlight_dev = NULL; -+ } -+} -+ -+/* AC & Battery subdriver */ -+ -+static struct power_supply yeeloong_ac, yeeloong_bat; -+ -+#define AC_OFFLINE 0 -+#define AC_ONLINE 1 -+ -+static int yeeloong_get_ac_props(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_ONLINE: -+ val->intval = ((ec_read(REG_BAT_POWER)) & BIT_BAT_POWER_ACIN) ? -+ AC_ONLINE : AC_OFFLINE; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static enum power_supply_property yeeloong_ac_props[] = { -+ POWER_SUPPLY_PROP_ONLINE, -+}; -+ -+static struct power_supply yeeloong_ac = { -+ .name = "yeeloong-ac", -+ .type = POWER_SUPPLY_TYPE_MAINS, -+ .properties = yeeloong_ac_props, -+ .num_properties = ARRAY_SIZE(yeeloong_ac_props), -+ .get_property = yeeloong_get_ac_props, -+}; -+ -+#define BAT_CAP_CRITICAL 5 -+#define BAT_CAP_HIGH 99 -+ -+#define get_bat_info(type) \ -+ ((ec_read(REG_BAT_##type##_HIGH) << 8) | \ -+ (ec_read(REG_BAT_##type##_LOW))) -+ -+static int yeeloong_bat_get_ex_property(enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ int bat_in, curr_cap, cap_level, status, charge, health; -+ -+ status = ec_read(REG_BAT_STATUS); -+ bat_in = status & BIT_BAT_STATUS_IN; -+ curr_cap = get_bat_info(RELATIVE_CAP); -+ if (status & BIT_BAT_STATUS_FULL) -+ curr_cap = 100; -+ -+ switch (psp) { -+ case POWER_SUPPLY_PROP_PRESENT: -+ val->intval = bat_in; -+ break; -+ case POWER_SUPPLY_PROP_CAPACITY: -+ val->intval = curr_cap; -+ break; -+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL: -+ cap_level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; -+ if (status & BIT_BAT_STATUS_LOW) { -+ cap_level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; -+ if (curr_cap <= BAT_CAP_CRITICAL) -+ cap_level = -+ POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; -+ } else if (status & BIT_BAT_STATUS_FULL) { -+ cap_level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; -+ if (curr_cap >= BAT_CAP_HIGH) -+ cap_level = POWER_SUPPLY_CAPACITY_LEVEL_HIGH; -+ } else if (status & BIT_BAT_STATUS_DESTROY) -+ cap_level = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; -+ val->intval = cap_level; -+ break; -+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: -+ /* seconds */ -+ val->intval = bat_in ? (curr_cap - 3) * 54 + 142 : 0; -+ break; -+ case POWER_SUPPLY_PROP_STATUS: -+ if (!bat_in) -+ charge = POWER_SUPPLY_STATUS_UNKNOWN; -+ else { -+ if (status & BIT_BAT_STATUS_FULL) { -+ val->intval = POWER_SUPPLY_STATUS_FULL; -+ break; -+ } -+ -+ charge = ec_read(REG_BAT_CHARGE); -+ if (charge & FLAG_BAT_CHARGE_DISCHARGE) -+ charge = POWER_SUPPLY_STATUS_DISCHARGING; -+ else if (charge & FLAG_BAT_CHARGE_CHARGE) -+ charge = POWER_SUPPLY_STATUS_CHARGING; -+ else -+ charge = POWER_SUPPLY_STATUS_NOT_CHARGING; -+ } -+ val->intval = charge; -+ break; -+ case POWER_SUPPLY_PROP_HEALTH: -+ if (!bat_in) /* no battery present */ -+ health = POWER_SUPPLY_HEALTH_UNKNOWN; -+ else { /* Assume it is good */ -+ health = POWER_SUPPLY_HEALTH_GOOD; -+ if (status & -+ (BIT_BAT_STATUS_DESTROY | BIT_BAT_STATUS_LOW)) -+ health = POWER_SUPPLY_HEALTH_DEAD; -+ if (ec_read(REG_BAT_CHARGE_STATUS) & -+ BIT_BAT_CHARGE_STATUS_OVERTEMP) -+ health = POWER_SUPPLY_HEALTH_OVERHEAT; -+ } -+ val->intval = health; -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_NOW: /* 1/100(%)*1000 µAh */ -+ val->intval = curr_cap * get_bat_info(FULLCHG_CAP) * 10; -+ break; -+ default: -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+static int get_battery_temp(void) -+{ -+ int value; -+ -+ value = get_bat_info(TEMPERATURE); -+ -+ return value * 1000; -+} -+ -+static int get_battery_current(void) -+{ -+ s16 value; -+ -+ value = get_bat_info(CURRENT); -+ -+ return -value; -+} -+ -+static int get_battery_voltage(void) -+{ -+ int value; -+ -+ value = get_bat_info(VOLTAGE); -+ -+ return value; -+} -+ -+static int yeeloong_get_bat_props(struct power_supply *psy, -+ enum power_supply_property psp, -+ union power_supply_propval *val) -+{ -+ switch (psp) { -+ /* Fixed information */ -+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: -+ val->intval = get_bat_info(DESIGN_VOL) * 1000; /* mV -> µV */ -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: -+ val->intval = get_bat_info(DESIGN_CAP) * 1000; /* mAh->µAh */ -+ break; -+ case POWER_SUPPLY_PROP_CHARGE_FULL: -+ val->intval = get_bat_info(FULLCHG_CAP) * 1000; /* µAh */ -+ break; -+ case POWER_SUPPLY_PROP_MANUFACTURER: -+ val->strval = (ec_read(REG_BAT_VENDOR) == -+ FLAG_BAT_VENDOR_SANYO) ? "SANYO" : "SIMPLO"; -+ break; -+ /* Dynamic information */ -+ case POWER_SUPPLY_PROP_CURRENT_NOW: -+ val->intval = get_battery_current() * 1000; /* mA -> µA */ -+ break; -+ case POWER_SUPPLY_PROP_VOLTAGE_NOW: -+ val->intval = get_battery_voltage() * 1000; /* mV -> µV */ -+ break; -+ case POWER_SUPPLY_PROP_TEMP: -+ val->intval = get_battery_temp(); /* Celcius */ -+ break; -+ /* Dynamic but related information */ -+ default: -+ return yeeloong_bat_get_ex_property(psp, val); -+ } -+ -+ return 0; -+} -+ -+static enum power_supply_property yeeloong_bat_props[] = { -+ POWER_SUPPLY_PROP_STATUS, -+ POWER_SUPPLY_PROP_PRESENT, -+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, -+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, -+ POWER_SUPPLY_PROP_CHARGE_FULL, -+ POWER_SUPPLY_PROP_CHARGE_NOW, -+ POWER_SUPPLY_PROP_CURRENT_NOW, -+ POWER_SUPPLY_PROP_VOLTAGE_NOW, -+ POWER_SUPPLY_PROP_HEALTH, -+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, -+ POWER_SUPPLY_PROP_CAPACITY, -+ POWER_SUPPLY_PROP_CAPACITY_LEVEL, -+ POWER_SUPPLY_PROP_TEMP, -+ POWER_SUPPLY_PROP_MANUFACTURER, -+}; -+ -+static struct power_supply yeeloong_bat = { -+ .name = "yeeloong-bat", -+ .type = POWER_SUPPLY_TYPE_BATTERY, -+ .properties = yeeloong_bat_props, -+ .num_properties = ARRAY_SIZE(yeeloong_bat_props), -+ .get_property = yeeloong_get_bat_props, -+}; -+ -+static int ac_bat_initialized; -+ -+static int yeeloong_bat_init(void) -+{ -+ int ret; -+ -+ ret = power_supply_register(NULL, &yeeloong_ac); -+ if (ret) -+ return ret; -+ ret = power_supply_register(NULL, &yeeloong_bat); -+ if (ret) { -+ power_supply_unregister(&yeeloong_ac); -+ return ret; -+ } -+ ac_bat_initialized = 1; -+ -+ return 0; -+} -+ -+static void yeeloong_bat_exit(void) -+{ -+ ac_bat_initialized = 0; -+ -+ power_supply_unregister(&yeeloong_ac); -+ power_supply_unregister(&yeeloong_bat); -+} -+/* hwmon subdriver */ -+ -+#define MIN_FAN_SPEED 0 -+#define MAX_FAN_SPEED 3 -+ -+static int get_fan_pwm_enable(void) -+{ -+ int level, mode; -+ -+ level = ec_read(REG_FAN_SPEED_LEVEL); -+ mode = ec_read(REG_FAN_AUTO_MAN_SWITCH); -+ -+ if (level == MAX_FAN_SPEED && mode == BIT_FAN_MANUAL) -+ mode = 0; -+ else if (mode == BIT_FAN_MANUAL) -+ mode = 1; -+ else -+ mode = 2; -+ -+ return mode; -+} -+ -+static void set_fan_pwm_enable(int mode) -+{ -+ switch (mode) { -+ case 0: -+ /* fullspeed */ -+ ec_write(REG_FAN_AUTO_MAN_SWITCH, BIT_FAN_MANUAL); -+ ec_write(REG_FAN_SPEED_LEVEL, MAX_FAN_SPEED); -+ break; -+ case 1: -+ ec_write(REG_FAN_AUTO_MAN_SWITCH, BIT_FAN_MANUAL); -+ break; -+ case 2: -+ ec_write(REG_FAN_AUTO_MAN_SWITCH, BIT_FAN_AUTO); -+ break; -+ default: -+ break; -+ } -+} -+ -+static int get_fan_pwm(void) -+{ -+ return ec_read(REG_FAN_SPEED_LEVEL); -+} -+ -+static void set_fan_pwm(int value) -+{ -+ int mode; -+ -+ mode = ec_read(REG_FAN_AUTO_MAN_SWITCH); -+ if (mode != BIT_FAN_MANUAL) -+ return; -+ -+ value = SENSORS_LIMIT(value, 0, 3); -+ -+ /* We must ensure the fan is on */ -+ if (value > 0) -+ ec_write(REG_FAN_CONTROL, BIT_FAN_CONTROL_ON); -+ -+ ec_write(REG_FAN_SPEED_LEVEL, value); -+} -+ -+static int get_fan_rpm(void) -+{ -+ int value; -+ -+ value = FAN_SPEED_DIVIDER / -+ (((ec_read(REG_FAN_SPEED_HIGH) & 0x0f) << 8) | -+ ec_read(REG_FAN_SPEED_LOW)); -+ -+ return value; -+} -+ -+static int get_cpu_temp(void) -+{ -+ s8 value; -+ -+ value = ec_read(REG_TEMPERATURE_VALUE); -+ -+ return value * 1000; -+} -+ -+static int get_cpu_temp_max(void) -+{ -+ return 60 * 1000; -+} -+ -+static int get_battery_temp_alarm(void) -+{ -+ int status; -+ -+ status = (ec_read(REG_BAT_CHARGE_STATUS) & -+ BIT_BAT_CHARGE_STATUS_OVERTEMP); -+ -+ return !!status; -+} -+ -+static ssize_t store_sys_hwmon(void (*set) (int), const char *buf, size_t count) -+{ -+ int ret; -+ unsigned long value; -+ -+ if (!count) -+ return 0; -+ -+ ret = strict_strtoul(buf, 10, &value); -+ if (ret) -+ return ret; -+ -+ set(value); -+ -+ return count; -+} -+ -+static ssize_t show_sys_hwmon(int (*get) (void), char *buf) -+{ -+ return sprintf(buf, "%d\n", get()); -+} -+ -+#define CREATE_SENSOR_ATTR(_name, _mode, _set, _get) \ -+ static ssize_t show_##_name(struct device *dev, \ -+ struct device_attribute *attr, \ -+ char *buf) \ -+ { \ -+ return show_sys_hwmon(_set, buf); \ -+ } \ -+ static ssize_t store_##_name(struct device *dev, \ -+ struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+ { \ -+ return store_sys_hwmon(_get, buf, count); \ -+ } \ -+ static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0); -+ -+CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, get_fan_rpm, NULL); -+CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR, get_fan_pwm, set_fan_pwm); -+CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, get_fan_pwm_enable, -+ set_fan_pwm_enable); -+CREATE_SENSOR_ATTR(temp1_input, S_IRUGO, get_cpu_temp, NULL); -+CREATE_SENSOR_ATTR(temp1_max, S_IRUGO, get_cpu_temp_max, NULL); -+CREATE_SENSOR_ATTR(temp2_input, S_IRUGO, get_battery_temp, NULL); -+CREATE_SENSOR_ATTR(temp2_max_alarm, S_IRUGO, get_battery_temp_alarm, NULL); -+CREATE_SENSOR_ATTR(curr1_input, S_IRUGO, get_battery_current, NULL); -+CREATE_SENSOR_ATTR(in1_input, S_IRUGO, get_battery_voltage, NULL); -+ -+static ssize_t -+show_name(struct device *dev, struct device_attribute *attr, char *buf) -+{ -+ return sprintf(buf, "yeeloong\n"); -+} -+ -+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); -+ -+static struct attribute *hwmon_attributes[] = { -+ &sensor_dev_attr_pwm1.dev_attr.attr, -+ &sensor_dev_attr_pwm1_enable.dev_attr.attr, -+ &sensor_dev_attr_fan1_input.dev_attr.attr, -+ &sensor_dev_attr_temp1_input.dev_attr.attr, -+ &sensor_dev_attr_temp1_max.dev_attr.attr, -+ &sensor_dev_attr_temp2_input.dev_attr.attr, -+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, -+ &sensor_dev_attr_curr1_input.dev_attr.attr, -+ &sensor_dev_attr_in1_input.dev_attr.attr, -+ &sensor_dev_attr_name.dev_attr.attr, -+ NULL -+}; -+ -+static struct attribute_group hwmon_attribute_group = { -+ .attrs = hwmon_attributes -+}; -+ -+static struct device *yeeloong_hwmon_dev; -+ -+static int yeeloong_hwmon_init(void) -+{ -+ int ret; -+ -+ yeeloong_hwmon_dev = hwmon_device_register(NULL); -+ if (IS_ERR(yeeloong_hwmon_dev)) { -+ pr_err("Fail to register yeeloong hwmon device\n"); -+ yeeloong_hwmon_dev = NULL; -+ return PTR_ERR(yeeloong_hwmon_dev); -+ } -+ ret = sysfs_create_group(&yeeloong_hwmon_dev->kobj, -+ &hwmon_attribute_group); -+ if (ret) { -+ hwmon_device_unregister(yeeloong_hwmon_dev); -+ yeeloong_hwmon_dev = NULL; -+ return ret; -+ } -+ /* ensure fan is set to auto mode */ -+ set_fan_pwm_enable(2); -+ -+ return 0; -+} -+ -+static void yeeloong_hwmon_exit(void) -+{ -+ if (yeeloong_hwmon_dev) { -+ sysfs_remove_group(&yeeloong_hwmon_dev->kobj, -+ &hwmon_attribute_group); -+ hwmon_device_unregister(yeeloong_hwmon_dev); -+ yeeloong_hwmon_dev = NULL; -+ } -+} -+ -+/* video output subdriver */ -+ -+static int lcd_video_output_get(struct output_device *od) -+{ -+ return ec_read(REG_DISPLAY_LCD); -+} -+ -+#define LCD 0 -+#define CRT 1 -+ -+static void display_vo_set(int display, int on) -+{ -+ int addr; -+ unsigned long value; -+ -+ addr = (display == LCD) ? 0x31 : 0x21; -+ -+ outb(addr, 0x3c4); -+ value = inb(0x3c5); -+ -+ if (display == LCD) -+ value |= (on ? 0x03 : 0x02); -+ else { -+ if (on) -+ clear_bit(7, &value); -+ else -+ set_bit(7, &value); -+ } -+ -+ outb(addr, 0x3c4); -+ outb(value, 0x3c5); -+} -+ -+static int lcd_video_output_set(struct output_device *od) -+{ -+ unsigned long status; -+ -+ status = !!od->request_state; -+ -+ display_vo_set(LCD, status); -+ ec_write(REG_BACKLIGHT_CTRL, status); -+ -+ return 0; -+} -+ -+static struct output_properties lcd_output_properties = { -+ .set_state = lcd_video_output_set, -+ .get_status = lcd_video_output_get, -+}; -+ -+static int crt_video_output_get(struct output_device *od) -+{ -+ return ec_read(REG_CRT_DETECT); -+} -+ -+static int crt_video_output_set(struct output_device *od) -+{ -+ unsigned long status; -+ -+ status = !!od->request_state; -+ -+ if (ec_read(REG_CRT_DETECT) == BIT_CRT_DETECT_PLUG) -+ display_vo_set(CRT, status); -+ -+ return 0; -+} -+ -+static struct output_properties crt_output_properties = { -+ .set_state = crt_video_output_set, -+ .get_status = crt_video_output_get, -+}; -+ -+static struct output_device *lcd_output_dev, *crt_output_dev; -+ -+static void yeeloong_lcd_vo_set(int status) -+{ -+ lcd_output_dev->request_state = status; -+ lcd_video_output_set(lcd_output_dev); -+} -+ -+static void yeeloong_crt_vo_set(int status) -+{ -+ crt_output_dev->request_state = status; -+ crt_video_output_set(crt_output_dev); -+} -+ -+static int yeeloong_vo_init(void) -+{ -+ int ret; -+ -+ /* Register video output device: lcd, crt */ -+ lcd_output_dev = video_output_register("LCD", NULL, NULL, -+ &lcd_output_properties); -+ -+ if (IS_ERR(lcd_output_dev)) { -+ ret = PTR_ERR(lcd_output_dev); -+ lcd_output_dev = NULL; -+ return ret; -+ } -+ /* Ensure LCD is on by default */ -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_ON); -+ -+ crt_output_dev = video_output_register("CRT", NULL, NULL, -+ &crt_output_properties); -+ -+ if (IS_ERR(crt_output_dev)) { -+ ret = PTR_ERR(crt_output_dev); -+ crt_output_dev = NULL; -+ return ret; -+ } -+ -+ /* Turn off CRT by default, and will be enabled when the CRT -+ * connectting event reported by SCI */ -+ yeeloong_crt_vo_set(BIT_CRT_DETECT_UNPLUG); -+ -+ return 0; -+} -+ -+static void yeeloong_vo_exit(void) -+{ -+ if (lcd_output_dev) { -+ video_output_unregister(lcd_output_dev); -+ lcd_output_dev = NULL; -+ } -+ if (crt_output_dev) { -+ video_output_unregister(crt_output_dev); -+ crt_output_dev = NULL; -+ } -+} -+ -+/* hotkey subdriver */ -+ -+static struct input_dev *yeeloong_hotkey_dev; -+ -+static const struct key_entry yeeloong_keymap[] = { -+ {KE_SW, EVENT_LID, { SW_LID } }, -+ {KE_KEY, EVENT_CAMERA, { KEY_CAMERA } }, /* Fn + ESC */ -+ {KE_KEY, EVENT_SLEEP, { KEY_SLEEP } }, /* Fn + F1 */ -+ {KE_KEY, EVENT_DISPLAYTOGGLE, { KEY_DISPLAYTOGGLE } }, /* Fn + F2 */ -+ {KE_KEY, EVENT_SWITCHVIDEOMODE, { KEY_SWITCHVIDEOMODE } }, /* Fn + F3 */ -+ {KE_KEY, EVENT_AUDIO_MUTE, { KEY_MUTE } }, /* Fn + F4 */ -+ {KE_KEY, EVENT_WLAN, { KEY_WLAN } }, /* Fn + F5 */ -+ {KE_KEY, EVENT_DISPLAY_BRIGHTNESS, { KEY_BRIGHTNESSUP } }, /* Fn + up */ -+ {KE_KEY, EVENT_DISPLAY_BRIGHTNESS, { KEY_BRIGHTNESSDOWN } }, /* Fn + down */ -+ {KE_KEY, EVENT_AUDIO_VOLUME, { KEY_VOLUMEUP } }, /* Fn + right */ -+ {KE_KEY, EVENT_AUDIO_VOLUME, { KEY_VOLUMEDOWN } }, /* Fn + left */ -+ {KE_END, 0} -+}; -+ -+static struct key_entry *get_event_key_entry(int event, int status) -+{ -+ struct key_entry *ke; -+ static int old_brightness_status = -1; -+ static int old_volume_status = -1; -+ -+ ke = sparse_keymap_entry_from_scancode(yeeloong_hotkey_dev, event); -+ if (!ke) -+ return NULL; -+ -+ switch (event) { -+ case EVENT_DISPLAY_BRIGHTNESS: -+ /* current status > old one, means up */ -+ if ((status < old_brightness_status) || (0 == status)) -+ ke++; -+ old_brightness_status = status; -+ break; -+ case EVENT_AUDIO_VOLUME: -+ if ((status < old_volume_status) || (0 == status)) -+ ke++; -+ old_volume_status = status; -+ break; -+ default: -+ break; -+ } -+ -+ return ke; -+} -+ -+static int report_lid_switch(int status) -+{ -+ input_report_switch(yeeloong_hotkey_dev, SW_LID, !status); -+ input_sync(yeeloong_hotkey_dev); -+ -+ return status; -+} -+ -+static int crt_detect_handler(int status) -+{ -+ if (status) { -+ yeeloong_crt_vo_set(BIT_CRT_DETECT_PLUG); -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_OFF); -+ } else { -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_ON); -+ yeeloong_crt_vo_set(BIT_CRT_DETECT_UNPLUG); -+ } -+ return status; -+} -+ -+static int displaytoggle_handler(int status) -+{ -+ /* EC(>=PQ1D26) does this job for us, we can not do it again, -+ * otherwise, the brightness will not resume to the normal level! */ -+ if (ec_version_before("EC_VER=PQ1D26")) -+ yeeloong_lcd_vo_set(status); -+ -+ return status; -+} -+ -+static int switchvideomode_handler(int status) -+{ -+ static int video_output_status; -+ -+ /* Only enable switch video output button -+ * when CRT is connected */ -+ if (ec_read(REG_CRT_DETECT) == BIT_CRT_DETECT_UNPLUG) -+ return 0; -+ /* 0. no CRT connected: LCD on, CRT off -+ * 1. BOTH on -+ * 2. LCD off, CRT on -+ * 3. BOTH off -+ * 4. LCD on, CRT off -+ */ -+ video_output_status++; -+ if (video_output_status > 4) -+ video_output_status = 1; -+ -+ switch (video_output_status) { -+ case 1: -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_ON); -+ yeeloong_crt_vo_set(BIT_CRT_DETECT_PLUG); -+ break; -+ case 2: -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_OFF); -+ yeeloong_crt_vo_set(BIT_CRT_DETECT_PLUG); -+ break; -+ case 3: -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_OFF); -+ yeeloong_crt_vo_set(BIT_CRT_DETECT_UNPLUG); -+ break; -+ case 4: -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_ON); -+ yeeloong_crt_vo_set(BIT_CRT_DETECT_UNPLUG); -+ break; -+ default: -+ /* Ensure LCD is on */ -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_ON); -+ break; -+ } -+ return video_output_status; -+} -+ -+static int camera_handler(int status) -+{ -+ int value; -+ -+ value = ec_read(REG_CAMERA_CONTROL); -+ ec_write(REG_CAMERA_CONTROL, value | (1 << 1)); -+ -+ return status; -+} -+ -+static int usb2_handler(int status) -+{ -+ pr_emerg("USB2 Over Current occurred\n"); -+ -+ return status; -+} -+ -+static int usb0_handler(int status) -+{ -+ pr_emerg("USB0 Over Current occurred\n"); -+ -+ return status; -+} -+ -+static int ac_bat_handler(int status) -+{ -+ if (ac_bat_initialized) { -+ power_supply_changed(&yeeloong_ac); -+ power_supply_changed(&yeeloong_bat); -+ } -+ return status; -+} -+ -+static void do_event_action(int event) -+{ -+ sci_handler handler; -+ int reg, status; -+ struct key_entry *ke; -+ -+ reg = 0; -+ handler = NULL; -+ -+ switch (event) { -+ case EVENT_LID: -+ reg = REG_LID_DETECT; -+ break; -+ case EVENT_SWITCHVIDEOMODE: -+ handler = switchvideomode_handler; -+ break; -+ case EVENT_CRT_DETECT: -+ reg = REG_CRT_DETECT; -+ handler = crt_detect_handler; -+ break; -+ case EVENT_CAMERA: -+ reg = REG_CAMERA_STATUS; -+ handler = camera_handler; -+ break; -+ case EVENT_USB_OC2: -+ reg = REG_USB2_FLAG; -+ handler = usb2_handler; -+ break; -+ case EVENT_USB_OC0: -+ reg = REG_USB0_FLAG; -+ handler = usb0_handler; -+ break; -+ case EVENT_DISPLAYTOGGLE: -+ reg = REG_DISPLAY_LCD; -+ handler = displaytoggle_handler; -+ break; -+ case EVENT_AUDIO_MUTE: -+ reg = REG_AUDIO_MUTE; -+ break; -+ case EVENT_DISPLAY_BRIGHTNESS: -+ reg = REG_DISPLAY_BRIGHTNESS; -+ break; -+ case EVENT_AUDIO_VOLUME: -+ reg = REG_AUDIO_VOLUME; -+ break; -+ case EVENT_AC_BAT: -+ handler = ac_bat_handler; -+ break; -+ default: -+ break; -+ } -+ -+ if (reg != 0) -+ status = ec_read(reg); -+ -+ if (handler != NULL) -+ status = handler(status); -+ -+ pr_info("%s: event: %d status: %d\n", __func__, event, status); -+ -+ /* Report current key to user-space */ -+ ke = get_event_key_entry(event, status); -+ if (ke) { -+ if (ke->keycode == SW_LID) -+ report_lid_switch(status); -+ else -+ sparse_keymap_report_entry(yeeloong_hotkey_dev, ke, 1, -+ true); -+ } -+} -+ -+/* -+ * SCI(system control interrupt) main interrupt routine -+ * -+ * We will do the query and get event number together so the interrupt routine -+ * should be longer than 120us now at least 3ms elpase for it. -+ */ -+static irqreturn_t sci_irq_handler(int irq, void *dev_id) -+{ -+ int ret, event; -+ -+ if (SCI_IRQ_NUM != irq) -+ return IRQ_NONE; -+ -+ /* Query the event number */ -+ ret = ec_query_event_num(); -+ if (ret < 0) -+ return IRQ_NONE; -+ -+ event = ec_get_event_num(); -+ if (event < EVENT_START || event > EVENT_END) -+ return IRQ_NONE; -+ -+ /* Execute corresponding actions */ -+ do_event_action(event); -+ -+ return IRQ_HANDLED; -+} -+ -+/* -+ * Config and init some msr and gpio register properly. -+ */ -+static int sci_irq_init(void) -+{ -+ u32 hi, lo; -+ u32 gpio_base; -+ unsigned long flags; -+ int ret; -+ -+ /* Get gpio base */ -+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo); -+ gpio_base = lo & 0xff00; -+ -+ /* Filter the former kb3310 interrupt for security */ -+ ret = ec_query_event_num(); -+ if (ret) -+ return ret; -+ -+ /* For filtering next number interrupt */ -+ udelay(10000); -+ -+ /* Set gpio native registers and msrs for GPIO27 SCI EVENT PIN -+ * gpio : -+ * input, pull-up, no-invert, event-count and value 0, -+ * no-filter, no edge mode -+ * gpio27 map to Virtual gpio0 -+ * msr : -+ * no primary and lpc -+ * Unrestricted Z input to IG10 from Virtual gpio 0. -+ */ -+ local_irq_save(flags); -+ _rdmsr(0x80000024, &hi, &lo); -+ lo &= ~(1 << 10); -+ _wrmsr(0x80000024, hi, lo); -+ _rdmsr(0x80000025, &hi, &lo); -+ lo &= ~(1 << 10); -+ _wrmsr(0x80000025, hi, lo); -+ _rdmsr(0x80000023, &hi, &lo); -+ lo |= (0x0a << 0); -+ _wrmsr(0x80000023, hi, lo); -+ local_irq_restore(flags); -+ -+ /* Set gpio27 as sci interrupt -+ * -+ * input, pull-up, no-fliter, no-negedge, invert -+ * the sci event is just about 120us -+ */ -+ asm(".set noreorder\n"); -+ /* input enable */ -+ outl(0x00000800, (gpio_base | 0xA0)); -+ /* revert the input */ -+ outl(0x00000800, (gpio_base | 0xA4)); -+ /* event-int enable */ -+ outl(0x00000800, (gpio_base | 0xB8)); -+ asm(".set reorder\n"); -+ -+ return 0; -+} -+ -+static struct irqaction sci_irqaction = { -+ .handler = sci_irq_handler, -+ .name = "sci", -+ .flags = IRQF_SHARED, -+}; -+ -+static int yeeloong_hotkey_init(void) -+{ -+ int ret; -+ -+ ret = sci_irq_init(); -+ if (ret) -+ return -EFAULT; -+ -+ ret = setup_irq(SCI_IRQ_NUM, &sci_irqaction); -+ if (ret) -+ return -EFAULT; -+ -+ yeeloong_hotkey_dev = input_allocate_device(); -+ -+ if (!yeeloong_hotkey_dev) { -+ remove_irq(SCI_IRQ_NUM, &sci_irqaction); -+ return -ENOMEM; -+ } -+ -+ yeeloong_hotkey_dev->name = "HotKeys"; -+ yeeloong_hotkey_dev->phys = "button/input0"; -+ yeeloong_hotkey_dev->id.bustype = BUS_HOST; -+ yeeloong_hotkey_dev->dev.parent = NULL; -+ -+ ret = sparse_keymap_setup(yeeloong_hotkey_dev, yeeloong_keymap, NULL); -+ if (ret) { -+ pr_err("Fail to setup input device keymap\n"); -+ input_free_device(yeeloong_hotkey_dev); -+ return ret; -+ } -+ -+ ret = input_register_device(yeeloong_hotkey_dev); -+ if (ret) { -+ sparse_keymap_free(yeeloong_hotkey_dev); -+ input_free_device(yeeloong_hotkey_dev); -+ return ret; -+ } -+ -+ /* Update the current status of LID */ -+ report_lid_switch(BIT_LID_DETECT_ON); -+ -+#ifdef CONFIG_LOONGSON_SUSPEND -+ /* Install the real yeeloong_report_lid_status for pm.c */ -+ yeeloong_report_lid_status = report_lid_switch; -+#endif -+ -+ return 0; -+} -+ -+static void yeeloong_hotkey_exit(void) -+{ -+ /* Free irq */ -+ remove_irq(SCI_IRQ_NUM, &sci_irqaction); -+ -+#ifdef CONFIG_LOONGSON_SUSPEND -+ /* Uninstall yeeloong_report_lid_status for pm.c */ -+ if (yeeloong_report_lid_status == report_lid_switch) -+ yeeloong_report_lid_status = NULL; -+#endif -+ -+ if (yeeloong_hotkey_dev) { -+ sparse_keymap_free(yeeloong_hotkey_dev); -+ input_unregister_device(yeeloong_hotkey_dev); -+ yeeloong_hotkey_dev = NULL; -+ } -+} -+ -+#ifdef CONFIG_PM -+static void usb_ports_set(int status) -+{ -+ status = !!status; -+ -+ ec_write(REG_USB0_FLAG, status); -+ ec_write(REG_USB1_FLAG, status); -+ ec_write(REG_USB2_FLAG, status); -+} -+ -+static int yeeloong_suspend(struct device *dev) -+ -+{ -+ if (ec_version_before("EC_VER=PQ1D27")) -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_OFF); -+ yeeloong_crt_vo_set(BIT_CRT_DETECT_UNPLUG); -+ usb_ports_set(BIT_USB_FLAG_OFF); -+ -+ return 0; -+} -+ -+static int yeeloong_resume(struct device *dev) -+{ -+ if (ec_version_before("EC_VER=PQ1D27")) -+ yeeloong_lcd_vo_set(BIT_DISPLAY_LCD_ON); -+ yeeloong_crt_vo_set(BIT_CRT_DETECT_PLUG); -+ usb_ports_set(BIT_USB_FLAG_ON); -+ -+ return 0; -+} -+ -+static const SIMPLE_DEV_PM_OPS(yeeloong_pm_ops, yeeloong_suspend, -+ yeeloong_resume); -+#endif -+ -+static struct platform_device_id platform_device_ids[] = { -+ { -+ .name = "yeeloong_laptop", -+ }, -+ {} -+}; -+ -+MODULE_DEVICE_TABLE(platform, platform_device_ids); -+ -+static struct platform_driver platform_driver = { -+ .driver = { -+ .name = "yeeloong_laptop", -+ .owner = THIS_MODULE, -+#ifdef CONFIG_PM -+ .pm = &yeeloong_pm_ops, -+#endif -+ }, -+ .id_table = platform_device_ids, -+}; -+ -+static int __init yeeloong_init(void) -+{ -+ int ret; -+ -+ pr_info("Load YeeLoong Laptop Platform Specific Driver.\n"); -+ -+ /* Register platform stuff */ -+ ret = platform_driver_register(&platform_driver); -+ if (ret) { -+ pr_err("Fail to register yeeloong platform driver.\n"); -+ return ret; -+ } -+ -+ ret = yeeloong_backlight_init(); -+ if (ret) { -+ pr_err("Fail to register yeeloong backlight driver.\n"); -+ yeeloong_backlight_exit(); -+ return ret; -+ } -+ -+ ret = yeeloong_bat_init(); -+ if (ret) { -+ pr_err("Fail to register yeeloong battery driver.\n"); -+ yeeloong_bat_exit(); -+ return ret; -+ } -+ -+ ret = yeeloong_hwmon_init(); -+ if (ret) { -+ pr_err("Fail to register yeeloong hwmon driver.\n"); -+ yeeloong_hwmon_exit(); -+ return ret; -+ } -+ -+ ret = yeeloong_vo_init(); -+ if (ret) { -+ pr_err("Fail to register yeeloong video output driver.\n"); -+ yeeloong_vo_exit(); -+ return ret; -+ } -+ -+ ret = yeeloong_hotkey_init(); -+ if (ret) { -+ pr_err("Fail to register yeeloong hotkey driver.\n"); -+ yeeloong_hotkey_exit(); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static void __exit yeeloong_exit(void) -+{ -+ yeeloong_hotkey_exit(); -+ yeeloong_vo_exit(); -+ yeeloong_hwmon_exit(); -+ yeeloong_bat_exit(); -+ yeeloong_backlight_exit(); -+ platform_driver_unregister(&platform_driver); -+ -+ pr_info("Unload YeeLoong Platform Specific Driver.\n"); -+} -+ -+module_init(yeeloong_init); -+module_exit(yeeloong_exit); -+ -+MODULE_AUTHOR("Wu Zhangjin <wuzhangjin@gmail.com>; Liu Junliang <liujl@lemote.com>"); -+MODULE_DESCRIPTION("YeeLoong laptop driver"); -+MODULE_LICENSE("GPL"); -diff -Nur linux-2.6.36.orig/drivers/staging/sm7xx/smtcfb.c linux-2.6.36/drivers/staging/sm7xx/smtcfb.c ---- linux-2.6.36.orig/drivers/staging/sm7xx/smtcfb.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/drivers/staging/sm7xx/smtcfb.c 2010-11-18 11:47:59.000000000 +0100 -@@ -12,6 +12,8 @@ - * License. See the file COPYING in the main directory of this archive for - * more details. - * -+ * - Remove the buggy 2D support for Lynx, 2010/01/06, Wu Zhangjin -+ * - * Version 0.10.26192.21.01 - * - Add PowerPC/Big endian support - * - Add 2D support for Lynx -@@ -107,6 +109,7 @@ - {"0x307", 1280, 1024, 8}, - - {"0x311", 640, 480, 16}, -+ {"0x313", 800, 480, 16}, - {"0x314", 800, 600, 16}, - {"0x317", 1024, 768, 16}, - {"0x31A", 1280, 1024, 16}, -diff -Nur linux-2.6.36.orig/drivers/usb/host/ohci-hcd.c linux-2.6.36/drivers/usb/host/ohci-hcd.c ---- linux-2.6.36.orig/drivers/usb/host/ohci-hcd.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/drivers/usb/host/ohci-hcd.c 2010-11-18 11:47:59.000000000 +0100 -@@ -832,9 +832,13 @@ - } - - if (ints & OHCI_INTR_WDH) { -- spin_lock (&ohci->lock); -- dl_done_list (ohci); -- spin_unlock (&ohci->lock); -+ if (ohci->hcca->done_head == 0) { -+ ints &= ~OHCI_INTR_WDH; -+ } else { -+ spin_lock (&ohci->lock); -+ dl_done_list (ohci); -+ spin_unlock (&ohci->lock); -+ } - } - - if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) { -diff -Nur linux-2.6.36.orig/net/rfkill/core.c linux-2.6.36/net/rfkill/core.c ---- linux-2.6.36.orig/net/rfkill/core.c 2010-10-20 22:30:22.000000000 +0200 -+++ linux-2.6.36/net/rfkill/core.c 2010-11-18 11:48:02.000000000 +0100 -@@ -112,7 +112,7 @@ - static DEFINE_MUTEX(rfkill_global_mutex); - static LIST_HEAD(rfkill_fds); /* list of open fds of /dev/rfkill */ - --static unsigned int rfkill_default_state = 1; -+static unsigned int rfkill_default_state; /* default: 0 = radio off */ - module_param_named(default_state, rfkill_default_state, uint, 0444); - MODULE_PARM_DESC(default_state, - "Default initial state for all radio types, 0 = radio off"); diff --git a/target/lemote/target.mk b/target/lemote/target.mk deleted file mode 100644 index 1f0c177af..000000000 --- a/target/lemote/target.mk +++ /dev/null @@ -1,5 +0,0 @@ -include $(TOPDIR)/mk/kernel-ver.mk -ARCH:= mips -CPU_ARCH:= mips64el -TARGET_OPTIMIZATION:= -Os -pipe -TARGET_CFLAGS_ARCH:= -march=loongson2f -mabi=64 diff --git a/target/lemote/uclibc.config b/target/lemote/uclibc.config deleted file mode 100644 index 7b8083c71..000000000 --- a/target/lemote/uclibc.config +++ /dev/null @@ -1,232 +0,0 @@ -# -# Automatically generated make config: don't edit -# Version: 0.9.30.1 -# Mon Jun 22 21:54:05 2009 -# -# TARGET_alpha is not set -# TARGET_arm is not set -# TARGET_avr32 is not set -# TARGET_bfin is not set -# TARGET_cris is not set -# TARGET_e1 is not set -# TARGET_frv is not set -# TARGET_h8300 is not set -# TARGET_hppa is not set -# TARGET_i386 is not set -# TARGET_i960 is not set -# TARGET_ia64 is not set -# TARGET_m68k is not set -# TARGET_microblaze is not set -TARGET_mips=y -# TARGET_nios is not set -# TARGET_nios2 is not set -# TARGET_powerpc is not set -# TARGET_sh is not set -# TARGET_sh64 is not set -# TARGET_sparc is not set -# TARGET_v850 is not set -# TARGET_vax is not set -# TARGET_x86_64 is not set -# TARGET_xtensa is not set - -# -# Target Architecture Features and Options -# -TARGET_ARCH="mips" -FORCE_OPTIONS_FOR_ARCH=y -ARCH_CFLAGS="-mno-split-addresses" -# CONFIG_MIPS_O32_ABI is not set -# CONFIG_MIPS_N32_ABI is not set -CONFIG_MIPS_N64_ABI=y -# CONFIG_MIPS_ISA_1 is not set -# CONFIG_MIPS_ISA_2 is not set -# CONFIG_MIPS_ISA_3 is not set -# CONFIG_MIPS_ISA_4 is not set -# CONFIG_MIPS_ISA_MIPS32 is not set -# CONFIG_MIPS_ISA_MIPS32R2 is not set -CONFIG_MIPS_ISA_MIPS64=y -TARGET_SUBARCH="" - -# -# Using ELF file format -# -ARCH_ANY_ENDIAN=y -ARCH_LITTLE_ENDIAN=y -# ARCH_WANTS_BIG_ENDIAN is not set -ARCH_WANTS_LITTLE_ENDIAN=y -ARCH_HAS_MMU=y -ARCH_USE_MMU=y -UCLIBC_HAS_FLOATS=y -UCLIBC_HAS_FPU=y -DO_C99_MATH=y -UCLIBC_HAS_FENV=y -KERNEL_HEADERS="/home/wbx/openadk/toolchain_build_mips64el/libc_dev/usr/include" -HAVE_DOT_CONFIG=y - -# -# General Library Settings -# -# HAVE_NO_PIC is not set -DOPIC=y -# ARCH_HAS_NO_SHARED is not set -# ARCH_HAS_NO_LDSO is not set -HAVE_SHARED=y -# FORCE_SHAREABLE_TEXT_SEGMENTS is not set -LDSO_LDD_SUPPORT=y -# LDSO_CACHE_SUPPORT is not set -# LDSO_PRELOAD_FILE_SUPPORT is not set -# UCLIBC_STATIC_LDCONFIG is not set -LDSO_RUNPATH=y -UCLIBC_CTOR_DTOR=y -# LDSO_GNU_HASH_SUPPORT is not set -# HAS_NO_THREADS is not set -UCLIBC_HAS_THREADS=y -PTHREADS_DEBUG_SUPPORT=y -LINUXTHREADS_OLD=y -UCLIBC_HAS_SYSLOG=y -UCLIBC_HAS_LFS=y -# MALLOC is not set -# MALLOC_SIMPLE is not set -MALLOC_STANDARD=y -MALLOC_GLIBC_COMPAT=y -UCLIBC_DYNAMIC_ATEXIT=y -COMPAT_ATEXIT=y -# UCLIBC_SUSV3_LEGACY is not set -# UCLIBC_SUSV3_LEGACY_MACROS is not set -# UCLIBC_HAS_STUBS is not set -UCLIBC_HAS_SHADOW=y -UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y -UCLIBC_HAS___PROGNAME=y -UCLIBC_HAS_PTY=y -ASSUME_DEVPTS=y -UNIX98PTY_ONLY=y -# UCLIBC_HAS_GETPT is not set -UCLIBC_HAS_TM_EXTENSIONS=y -UCLIBC_HAS_TZ_CACHING=y -UCLIBC_HAS_TZ_FILE=y -UCLIBC_HAS_TZ_FILE_READ_MANY=y -UCLIBC_TZ_FILE_PATH="/etc/TZ" - -# -# Advanced Library Settings -# -UCLIBC_PWD_BUFFER_SIZE=256 -UCLIBC_GRP_BUFFER_SIZE=256 - -# -# Support various families of functions -# -# UCLIBC_LINUX_MODULE_24 is not set -UCLIBC_LINUX_SPECIFIC=y -UCLIBC_HAS_GNU_ERROR=y -UCLIBC_BSD_SPECIFIC=y -UCLIBC_HAS_BSD_ERR=y -# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set -# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set -# UCLIBC_NTP_LEGACY is not set -# UCLIBC_SV4_DEPRECATED is not set -UCLIBC_HAS_REALTIME=y -UCLIBC_HAS_ADVANCED_REALTIME=y -UCLIBC_HAS_EPOLL=y -UCLIBC_HAS_XATTR=y -# UCLIBC_HAS_PROFILING is not set -UCLIBC_HAS_CRYPT_IMPL=y -UCLIBC_HAS_CRYPT=y -UCLIBC_HAS_NETWORK_SUPPORT=y -UCLIBC_HAS_SOCKET=y -UCLIBC_HAS_IPV4=y -UCLIBC_HAS_IPV6=y -UCLIBC_HAS_RPC=y -UCLIBC_HAS_FULL_RPC=y -UCLIBC_HAS_REENTRANT_RPC=y -UCLIBC_USE_NETLINK=y -UCLIBC_SUPPORT_AI_ADDRCONFIG=y -UCLIBC_HAS_BSD_RES_CLOSE=y - -# -# String and Stdio Support -# -UCLIBC_HAS_STRING_GENERIC_OPT=y -UCLIBC_HAS_STRING_ARCH_OPT=y -UCLIBC_HAS_CTYPE_TABLES=y -UCLIBC_HAS_CTYPE_SIGNED=y -# UCLIBC_HAS_CTYPE_UNSAFE is not set -UCLIBC_HAS_CTYPE_CHECKED=y -# UCLIBC_HAS_CTYPE_ENFORCED is not set -UCLIBC_HAS_WCHAR=y -# UCLIBC_HAS_LOCALE is not set -UCLIBC_HAS_HEXADECIMAL_FLOATS=y -UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y -UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 -UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y -# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set -# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set -UCLIBC_HAS_STDIO_BUFSIZ_4096=y -# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set -UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set -# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set -UCLIBC_HAS_STDIO_GETC_MACRO=y -UCLIBC_HAS_STDIO_PUTC_MACRO=y -UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y -# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set -UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y -UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y -UCLIBC_HAS_PRINTF_M_SPEC=y -UCLIBC_HAS_ERRNO_MESSAGES=y -# UCLIBC_HAS_SYS_ERRLIST is not set -UCLIBC_HAS_SIGNUM_MESSAGES=y -# UCLIBC_HAS_SYS_SIGLIST is not set -UCLIBC_HAS_GNU_GETOPT=y -UCLIBC_HAS_GNU_GETSUBOPT=y - -# -# Big and Tall -# -UCLIBC_HAS_REGEX=y -UCLIBC_HAS_REGEX_OLD=y -UCLIBC_HAS_FNMATCH=y -UCLIBC_HAS_FNMATCH_OLD=y -UCLIBC_HAS_WORDEXP=y -UCLIBC_HAS_FTW=y -UCLIBC_HAS_GLOB=y -UCLIBC_HAS_GNU_GLOB=y - -# -# Library Installation Options -# -SHARED_LIB_LOADER_PREFIX="/lib" -RUNTIME_PREFIX="/" -DEVEL_PREFIX="/usr/" - -# -# Security options -# -# UCLIBC_BUILD_PIE is not set -UCLIBC_HAS_ARC4RANDOM=y -# HAVE_NO_SSP is not set -# UCLIBC_HAS_SSP is not set -UCLIBC_BUILD_RELRO=y -# UCLIBC_BUILD_NOW is not set -UCLIBC_BUILD_NOEXECSTACK=y - -# -# uClibc development/debugging options -# -CROSS_COMPILER_PREFIX="" -UCLIBC_EXTRA_CFLAGS="" -# DODEBUG is not set -# DODEBUG_PT is not set -DOSTRIP=y -# DOASSERTS is not set -# SUPPORT_LD_DEBUG is not set -# SUPPORT_LD_DEBUG_EARLY is not set -# UCLIBC_MALLOC_DEBUGGING is not set -WARNINGS="-Wall" -# EXTRA_WARNINGS is not set -# DOMULTI is not set -# UCLIBC_MJN3_ONLY is not set diff --git a/target/lemote/xorg.conf b/target/lemote/xorg.conf deleted file mode 100644 index c9c9388f2..000000000 --- a/target/lemote/xorg.conf +++ /dev/null @@ -1,53 +0,0 @@ -Section "ServerLayout" - Identifier "Default Layout" - Screen "Default Screen" - Option "AIGLX" "false" -EndSection - -Section "ServerFlags" - Option "NoTrapSignals" -EndSection - -Section "Module" - Load "vgahw" - Load "fb" - Load "exa" - Load "xaa" - Load "int10" - Load "ddc" - Load "i2c" - Load "vbe" - Disable "glx" - Disable "dri" -EndSection - -Section "Device" - Identifier "card0" - Driver "siliconmotion" - VendorName "Silicon Motion, Inc." - BoardName "SM712 LynxEM+" - BusID "PCI:0:8:0" - Option "AccelMethod" "EXA" - Option "pci_burst" "true" - Option "HWCursor" "false" - Option "SWCursor" "true" - Option "UseBIOS" "false" - Option "PanelSize" "1024x600" -EndSection - -Section "Monitor" - Identifier "Generic Monitor" - Option "DPMS" "true" - HorizSync 30-70 - VertRefresh 50-80 -EndSection - -Section "Screen" - Identifier "Default Screen" - Device "card0" - Monitor "Generic Monitor" - DefaultDepth 16 - SubSection "Display" - Modes "1024x600" - EndSubSection -EndSection |