boot via nfs works and I get a shell

1 files changed, 4730 insertions, 0 deletions

diff --git a/target/foxg20/patches/foxg20.patch b/target/foxg20/patches/foxg20.patch
new file mode 100644
index 000000000..92031067f
--- /dev/null
+++ b/target/foxg20/patches/foxg20.patch
@@ -0,0 +1,4730 @@
+diff -Nur linux-2.6.32.2.orig/arch/arm/Kconfig linux-2.6.32.2/arch/arm/Kconfig
+--- linux-2.6.32.2.orig/arch/arm/Kconfig	2009-12-18 23:27:07.000000000 +0100
++++ linux-2.6.32.2/arch/arm/Kconfig	2010-02-16 21:29:07.000000000 +0100
+@@ -18,6 +18,9 @@
+ 	select HAVE_KRETPROBES if (HAVE_KPROBES)
+ 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+ 	select HAVE_GENERIC_DMA_COHERENT
++	select HAVE_KERNEL_GZIP
++	select HAVE_KERNEL_BZIP2
++	select HAVE_KERNEL_LZMA
+ 	help
+ 	  The ARM series is a line of low-power-consumption RISC chip designs
+ 	  licensed by ARM Ltd and targeted at embedded applications and
+diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.32.2/arch/arm/mach-at91/at91sam9260_devices.c
+--- linux-2.6.32.2.orig/arch/arm/mach-at91/at91sam9260_devices.c	2009-12-18 23:27:07.000000000 +0100
++++ linux-2.6.32.2/arch/arm/mach-at91/at91sam9260_devices.c	2010-02-16 21:29:07.000000000 +0100
+@@ -454,7 +454,15 @@
+ 	.sda_is_open_drain	= 1,
+ 	.scl_pin		= AT91_PIN_PA24,
+ 	.scl_is_open_drain	= 1,
++#if defined(CONFIG_MACH_FOXG20)
++	/* Some I2C devices are limited to 100 kHz and i2c-gpio.h
++	 * says "frequency is (500 / udelay) kHz" so 5 is best (and is
++	 * used in i2c-gpio.c)
++	 */
++	.udelay			= 5,		/* ~100 kHz */
++#else
+ 	.udelay			= 2,		/* ~100 kHz */
++#endif
+ };
+ 
+ static struct platform_device at91sam9260_twi_device = {
+diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/board-foxg20.c linux-2.6.32.2/arch/arm/mach-at91/board-foxg20.c
+--- linux-2.6.32.2.orig/arch/arm/mach-at91/board-foxg20.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.32.2/arch/arm/mach-at91/board-foxg20.c	2010-02-16 21:29:07.000000000 +0100
+@@ -0,0 +1,371 @@
++/*
++ *  Copyright (C) 2005 SAN People
++ *  Copyright (C) 2008 Atmel
++ *  Copyright (C) 2010 Lee McLoughlin - lee@lmmrtech.com
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <linux/clk.h>
++#include <linux/w1-gpio.h>
++
++#include <mach/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <mach/board.h>
++#include <mach/gpio.h>
++#include <mach/at91sam9_smc.h>
++
++#include "sam9_smc.h"
++#include "generic.h"
++
++/*
++ * The FOX hardware comes as the "Netus" board with just the cpu, ram,
++ * dataflash and two header connectors. This is plugged into the Fox board
++ * which provides the ethernet, usb, rtc, leds, switch, ...
++ * Other version of the Fox board are planned which could contain
++ * both NAND and sound (WM8731).
++ *
++ * By default USART4 and USART5 are not enabled (freeing up those pins
++ * for general use)
++ *
++ * Note: Enabling the NAND without a NAND device present doesn't cause
++ * any issues as on boot the probe will fail.
++ */
++/* #define FOXG20_NAND */
++/* #define FOXG20_WM8731 */
++/* #define FOX_USART4 */
++/* #define FOX_USART5 */
++
++static void __init foxg20_map_io(void)
++{
++	/* Initialize processor: 18.432 MHz crystal */
++	at91sam9260_initialize(18432000);
++
++	/* DBGU on ttyS0. (Rx & Tx only) */
++	at91_register_uart(0, 0, 0);
++
++	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
++	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
++			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
++			   | ATMEL_UART_RI);
++
++	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
++	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
++
++	/* USART2 on ttyS3. (Rx & Tx only) */
++	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
++
++	/* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
++	at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_CTS | ATMEL_UART_RTS);
++
++#if defined(FOX_USART4)
++	/* USART4 on ttyS5. (Rx & Tx only) */
++	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
++#endif
++
++#if defined(FOX_USART5)
++	/* USART5 on ttyS6. (Rx & Tx only) */
++	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
++#endif
++
++	/* set serial console to ttyS0 (ie, DBGU) */
++	at91_set_serial_console(0);
++}
++
++static void __init foxg20_init_irq(void)
++{
++	at91sam9260_init_interrupts(NULL);
++}
++
++
++/*
++ * USB Host port
++ */
++static struct at91_usbh_data __initdata foxg20_usbh_data = {
++	.ports		= 2,
++};
++
++/*
++ * USB Device port
++ */
++static struct at91_udc_data __initdata foxg20_udc_data = {
++	.vbus_pin	= AT91_PIN_PC6,
++	.pullup_pin	= 0,		/* pull-up driven by UDC */
++};
++
++
++/*
++ * SPI devices.
++ */
++static struct spi_board_info foxg20_spi_devices[] = {
++#if !defined(CONFIG_MMC_AT91)
++	{	
++		.modalias	= "mtd_dataflash",
++		.chip_select	= 1,
++		.max_speed_hz	= 15 * 1000 * 1000,
++		.bus_num	= 0,
++	},
++#endif
++};
++
++
++/*
++ * MACB Ethernet device
++ */
++static struct at91_eth_data __initdata foxg20_macb_data = {
++	.phy_irq_pin	= AT91_PIN_PA7,
++	.is_rmii	= 1,
++};
++
++
++#ifdef FOXG20_NAND
++/* The Fox doesn't have NAND memory */
++/*
++ * NAND flash
++ */
++static struct mtd_partition __initdata foxg20_nand_partition[] = {
++	{
++		.name   = "Bootstrap",
++		.offset = 0,
++		.size   = 4 * SZ_1M,
++	},
++	{
++		.name	= "Partition 1",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= 60 * SZ_1M,
++	},
++	{
++		.name	= "Partition 2",
++		.offset	= MTDPART_OFS_NXTBLK,
++		.size	= MTDPART_SIZ_FULL,
++	},
++};
++
++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
++{
++	*num_partitions = ARRAY_SIZE(foxg20_nand_partition);
++	return foxg20_nand_partition;
++}
++
++/* det_pin is not connected */
++static struct atmel_nand_data __initdata foxg20_nand_data = {
++	.ale		= 21,
++	.cle		= 22,
++	.rdy_pin	= AT91_PIN_PC13,
++	.enable_pin	= AT91_PIN_PC14,
++	.partition_info	= nand_partitions,
++#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
++	.bus_width_16	= 1,
++#else
++	.bus_width_16	= 0,
++#endif
++};
++
++static struct sam9_smc_config __initdata foxg20_nand_smc_config = {
++	.ncs_read_setup		= 0,
++	.nrd_setup		= 2,
++	.ncs_write_setup	= 0,
++	.nwe_setup		= 2,
++
++	.ncs_read_pulse		= 4,
++	.nrd_pulse		= 4,
++	.ncs_write_pulse	= 4,
++	.nwe_pulse		= 4,
++
++	.read_cycle		= 7,
++	.write_cycle		= 7,
++
++	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
++	.tdf_cycles		= 3,
++};
++
++static void __init foxg20_add_device_nand(void)
++{
++	/* setup bus-width (8 or 16) */
++	if (foxg20_nand_data.bus_width_16)
++		foxg20_nand_smc_config.mode |= AT91_SMC_DBW_16;
++	else
++		foxg20_nand_smc_config.mode |= AT91_SMC_DBW_8;
++
++	/* configure chip-select 3 (NAND) */
++	sam9_smc_configure(3, &foxg20_nand_smc_config);
++
++	at91_add_device_nand(&foxg20_nand_data);
++}
++#endif
++
++
++/*
++ * MCI (SD/MMC)
++ * det_pin, wp_pin and vcc_pin are not connected
++ */
++static struct at91_mmc_data __initdata foxg20_mmc_data = {
++	.slot_b		= 1,
++	.wire4		= 1,
++};
++
++
++/*
++ * LEDs
++ */
++static struct gpio_led foxg20_leds[] = {
++	{	/* user led, red */
++		.name			= "user_led",
++		.gpio			= AT91_PIN_PC7,
++		.active_low		= 0,
++		.default_trigger	= "heartbeat",
++	},
++};
++
++
++/*
++ * GPIO Buttons
++ */
++#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
++static struct gpio_keys_button foxg20_buttons[] = {
++	{
++		.gpio		= AT91_PIN_PC4,
++		.code		= BTN_1,
++		.desc		= "Button 1",
++		.active_low	= 1,
++		.wakeup		= 1,
++	},
++};
++
++static struct gpio_keys_platform_data foxg20_button_data = {
++	.buttons	= foxg20_buttons,
++	.nbuttons	= ARRAY_SIZE(foxg20_buttons),
++};
++
++static struct platform_device foxg20_button_device = {
++	.name		= "gpio-keys",
++	.id		= -1,
++	.num_resources	= 0,
++	.dev		= {
++		.platform_data	= &foxg20_button_data,
++	}
++};
++
++static void __init foxg20_add_device_buttons(void)
++{
++	at91_set_gpio_input(AT91_PIN_PC4, 1);	/* btn1 */
++	at91_set_deglitch(AT91_PIN_PC4, 1);
++
++	platform_device_register(&foxg20_button_device);
++}
++#else
++static void __init foxg20_add_device_buttons(void) {}
++#endif
++
++
++#if !defined(FOXG20_WM8731)
++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
++static struct w1_gpio_platform_data w1_gpio_pdata = {
++	/* If you choose to use a pin other than PB16 it needs to be 3.3V */
++        .pin            = AT91_PIN_PB16,
++        .is_open_drain  = 1,
++};
++
++static struct platform_device w1_device = {
++        .name                   = "w1-gpio",
++        .id                     = -1,
++        .dev.platform_data      = &w1_gpio_pdata,
++};
++
++static void __init at91_add_device_w1(void)
++{
++        at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
++        at91_set_multi_drive(w1_gpio_pdata.pin, 1);
++        platform_device_register(&w1_device);
++}
++
++#endif
++#endif
++
++
++static struct i2c_board_info __initdata foxg20_i2c_devices[] = {
++	{
++		I2C_BOARD_INFO("24c512", 0x50),
++#ifdef FOXG20_WM8731
++		I2C_BOARD_INFO("wm8731", 0x1b),
++#endif
++	},
++};
++
++
++static void __init foxg20_board_init(void)
++{
++	/* Serial */
++	at91_add_device_serial();
++	/* USB Host */
++	at91_add_device_usbh(&foxg20_usbh_data);
++	/* USB Device */
++	at91_add_device_udc(&foxg20_udc_data);
++	/* SPI */
++	at91_add_device_spi(foxg20_spi_devices, ARRAY_SIZE(foxg20_spi_devices));
++#ifdef FOXG20_NAND
++	/* The Fox doesn't have NAND memory */
++	/* NAND */
++	foxg20_add_device_nand();
++#endif
++	/* Ethernet */
++	at91_add_device_eth(&foxg20_macb_data);
++	/* MMC */
++	at91_add_device_mmc(0, &foxg20_mmc_data);
++	/* I2C */
++	at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
++	/* LEDs */
++	at91_gpio_leds(foxg20_leds, ARRAY_SIZE(foxg20_leds));
++	/* Push Buttons */
++	foxg20_add_device_buttons();
++#ifdef FOXG20_WM8731
++	/* The Fox doesn't have this sound chip */
++	/* PCK0 provides MCLK to the WM8731 */
++	at91_set_B_periph(AT91_PIN_PC1, 0);
++	/* SSC (for WM8731) */
++	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
++#else
++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
++	at91_add_device_w1();
++#endif
++#endif
++}
++
++MACHINE_START(AT91SAM9G20EK, "Acme Systems FOXG20")
++	/* Maintainer: Lee McLoughlin */
++	.phys_io	= AT91_BASE_SYS,
++	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++	.boot_params	= AT91_SDRAM_BASE + 0x100,
++	.timer		= &at91sam926x_timer,
++	.map_io		= foxg20_map_io,
++	.init_irq	= foxg20_init_irq,
++	.init_machine	= foxg20_board_init,
++MACHINE_END
+diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/Kconfig linux-2.6.32.2/arch/arm/mach-at91/Kconfig
+--- linux-2.6.32.2.orig/arch/arm/mach-at91/Kconfig	2009-12-18 23:27:07.000000000 +0100
++++ linux-2.6.32.2/arch/arm/mach-at91/Kconfig	2010-02-16 21:29:07.000000000 +0100
+@@ -333,6 +333,13 @@
+ 	  Select this if you are using a Eukrea Electromatique's
+ 	  CPU9G20 Board <http://www.eukrea.com/>
+ 
++config MACH_FOXG20
++	bool "Acme Systems FOX G20"
++	depends on ARCH_AT91SAM9G20
++	help
++	  Select this if you are using Acme Systems
++	  FOX Board G20 <http://netus.acmesystems.it>
++
+ endif
+ 
+ # ----------------------------------------------------------
+@@ -388,13 +395,13 @@
+ 
+ config MTD_AT91_DATAFLASH_CARD
+ 	bool "Enable DataFlash Card support"
+-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
++	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926 || MACH_FOXG20)
+ 	help
+ 	  Enable support for the DataFlash card.
+ 
+ config MTD_NAND_ATMEL_BUSWIDTH_16
+ 	bool "Enable 16-bit data bus interface to NAND flash"
+-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
++	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK || MACH_FOXG20)
+ 	help
+ 	  On AT91SAM926x boards both types of NAND flash can be present
+ 	  (8 and 16 bit data bus width).
+diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/Makefile linux-2.6.32.2/arch/arm/mach-at91/Makefile
+--- linux-2.6.32.2.orig/arch/arm/mach-at91/Makefile	2009-12-18 23:27:07.000000000 +0100
++++ linux-2.6.32.2/arch/arm/mach-at91/Makefile	2010-02-16 21:29:07.000000000 +0100
+@@ -65,6 +65,9 @@
+ # AT91SAM9G45 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+ 
++# FOXG20 board-specific support
++obj-$(CONFIG_MACH_FOXG20) += board-foxg20.o
++
+ # AT91CAP9 board-specific support
+ obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
+ 
+diff -Nur linux-2.6.32.2.orig/drivers/mmc/host/at91_mci.c linux-2.6.32.2/drivers/mmc/host/at91_mci.c
+--- linux-2.6.32.2.orig/drivers/mmc/host/at91_mci.c	2009-12-18 23:27:07.000000000 +0100
++++ linux-2.6.32.2/drivers/mmc/host/at91_mci.c	2010-02-16 21:29:07.000000000 +0100
+@@ -461,7 +461,7 @@
+ 	at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
+ 	mr = AT91_MCI_PDCMODE | 0x34a;
+ 
+-	if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
++	if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20())
+ 		mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF;
+ 
+ 	at91_mci_write(host, AT91_MCI_MR, mr);
+@@ -1017,7 +1017,7 @@
+ 	host->bus_mode = 0;
+ 	host->board = pdev->dev.platform_data;
+ 	if (host->board->wire4) {
+-		if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
++		if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20())
+ 			mmc->caps |= MMC_CAP_4_BIT_DATA;
+ 		else
+ 			dev_warn(&pdev->dev, "4 wire bus mode not supported"
+diff -Nur linux-2.6.32.2.orig/foxg20.config-2.6.32.2-COMPLEX-v3 linux-2.6.32.2/foxg20.config-2.6.32.2-COMPLEX-v3
+--- linux-2.6.32.2.orig/foxg20.config-2.6.32.2-COMPLEX-v3	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.32.2/foxg20.config-2.6.32.2-COMPLEX-v3	2010-02-16 21:29:07.000000000 +0100
+@@ -0,0 +1,2789 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.32.2
++# Fri Jan 29 20:04:28 2010
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++CONFIG_CONSTRUCTORS=y
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_HAVE_KERNEL_GZIP=y
++CONFIG_HAVE_KERNEL_BZIP2=y
++CONFIG_HAVE_KERNEL_LZMA=y
++CONFIG_KERNEL_GZIP=y
++# CONFIG_KERNEL_BZIP2 is not set
++# CONFIG_KERNEL_LZMA is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_TREE_RCU=y
++# CONFIG_TREE_PREEMPT_RCU is not set
++# CONFIG_RCU_TRACE is not set
++CONFIG_RCU_FANOUT=32
++# CONFIG_RCU_FANOUT_EXACT is not set
++# CONFIG_TREE_RCU_TRACE is not set
++CONFIG_IKCONFIG=m
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_GROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++# CONFIG_SYSFS_DEPRECATED_V2 is not set
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++# CONFIG_RD_BZIP2 is not set
++# CONFIG_RD_LZMA is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++
++#
++# Kernel Performance Events And Counters
++#
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++
++#
++# GCOV-based kernel profiling
++#
++# CONFIG_GCOV_KERNEL is not set
++CONFIG_SLOW_WORK=y
++# CONFIG_SLOW_WORK_DEBUG is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBDAF=y
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++CONFIG_MMU=y
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_STMP3XXX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_NOMADIK is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_W90X900 is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_S5PC1XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_U300 is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_ARCH_BCMRING is not set
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9G10 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++CONFIG_ARCH_AT91SAM9G20=y
++# CONFIG_ARCH_AT91SAM9G45 is not set
++# CONFIG_ARCH_AT91CAP9 is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9G20 Board Type
++#
++# CONFIG_MACH_AT91SAM9G20EK is not set
++# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set
++# CONFIG_MACH_CPU9G20 is not set
++CONFIG_MACH_FOXG20=y
++
++#
++# AT91 Board Options
++#
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
++# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
++
++#
++# AT91 Feature Selections
++#
++CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++CONFIG_AT91_SLOW_CLOCK=y
++CONFIG_AT91_TIMER_HZ=100
++# CONFIG_AT91_EARLY_DBGU is not set
++CONFIG_AT91_EARLY_USART0=y
++# CONFIG_AT91_EARLY_USART1 is not set
++# CONFIG_AT91_EARLY_USART2 is not set
++# CONFIG_AT91_EARLY_USART3 is not set
++# CONFIG_AT91_EARLY_USART4 is not set
++# CONFIG_AT91_EARLY_USART5 is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_LEGACY=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++CONFIG_ARM_L1_CACHE_SHIFT=5
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=100
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_HAVE_MLOCK=y
++CONFIG_HAVE_MLOCKED_PAGE_BIT=y
++# CONFIG_KSM is not set
++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
++CONFIG_LEDS=y
++CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
++# CONFIG_UACCESS_WITH_MEMCPY is not set
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE=""
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# CPU Power Management
++#
++CONFIG_CPU_IDLE=y
++CONFIG_CPU_IDLE_GOV_LADDER=y
++CONFIG_CPU_IDLE_GOV_MENU=y
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_HAVE_AOUT=y
++CONFIG_BINFMT_AOUT=m
++CONFIG_BINFMT_MISC=m
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_APM_EMULATION=m
++# CONFIG_PM_RUNTIME is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_XFRM_IPCOMP=m
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_MULTIPLE_TABLES is not set
++# CONFIG_IP_ROUTE_MULTIPATH is not set
++# CONFIG_IP_ROUTE_VERBOSE is not set
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_TUNNEL=m
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++CONFIG_TCP_CONG_ADVANCED=y
++CONFIG_TCP_CONG_BIC=m
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_TCP_CONG_WESTWOOD=m
++CONFIG_TCP_CONG_HTCP=m
++CONFIG_TCP_CONG_HSTCP=m
++CONFIG_TCP_CONG_HYBLA=m
++CONFIG_TCP_CONG_VEGAS=m
++CONFIG_TCP_CONG_SCALABLE=m
++CONFIG_TCP_CONG_LP=m
++CONFIG_TCP_CONG_VENO=m
++CONFIG_TCP_CONG_YEAH=m
++CONFIG_TCP_CONG_ILLINOIS=m
++# CONFIG_DEFAULT_BIC is not set
++CONFIG_DEFAULT_CUBIC=y
++# CONFIG_DEFAULT_HTCP is not set
++# CONFIG_DEFAULT_VEGAS is not set
++# CONFIG_DEFAULT_WESTWOOD is not set
++# CONFIG_DEFAULT_RENO is not set
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++CONFIG_IPV6_MIP6=m
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_NDISC_NODETYPE=y
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++CONFIG_NETFILTER_ADVANCED=y
++CONFIG_BRIDGE_NETFILTER=y
++
++#
++# Core Netfilter Configuration
++#
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_QUEUE=m
++CONFIG_NETFILTER_NETLINK_LOG=m
++CONFIG_NF_CONNTRACK=m
++CONFIG_NF_CT_ACCT=y
++CONFIG_NF_CONNTRACK_MARK=y
++# CONFIG_NF_CONNTRACK_EVENTS is not set
++CONFIG_NF_CT_PROTO_DCCP=m
++CONFIG_NF_CT_PROTO_GRE=m
++CONFIG_NF_CT_PROTO_SCTP=m
++CONFIG_NF_CT_PROTO_UDPLITE=m
++CONFIG_NF_CONNTRACK_AMANDA=m
++CONFIG_NF_CONNTRACK_FTP=m
++CONFIG_NF_CONNTRACK_H323=m
++CONFIG_NF_CONNTRACK_IRC=m
++CONFIG_NF_CONNTRACK_NETBIOS_NS=m
++CONFIG_NF_CONNTRACK_PPTP=m
++CONFIG_NF_CONNTRACK_SANE=m
++CONFIG_NF_CONNTRACK_SIP=m
++CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NF_CT_NETLINK=m
++# CONFIG_NETFILTER_TPROXY is not set
++CONFIG_NETFILTER_XTABLES=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
++# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
++CONFIG_NETFILTER_XT_TARGET_HL=m
++CONFIG_NETFILTER_XT_TARGET_LED=m
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++CONFIG_NETFILTER_XT_TARGET_NFLOG=m
++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
++# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
++CONFIG_NETFILTER_XT_TARGET_RATEEST=m
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
++# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
++CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
++CONFIG_NETFILTER_XT_MATCH_COMMENT=m
++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
++CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++CONFIG_NETFILTER_XT_MATCH_DCCP=m
++CONFIG_NETFILTER_XT_MATCH_DSCP=m
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
++CONFIG_NETFILTER_XT_MATCH_HELPER=m
++CONFIG_NETFILTER_XT_MATCH_HL=m
++CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_OWNER=m
++CONFIG_NETFILTER_XT_MATCH_POLICY=m
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++CONFIG_NETFILTER_XT_MATCH_QUOTA=m
++CONFIG_NETFILTER_XT_MATCH_RATEEST=m
++CONFIG_NETFILTER_XT_MATCH_REALM=m
++CONFIG_NETFILTER_XT_MATCH_RECENT=m
++# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
++CONFIG_NETFILTER_XT_MATCH_STRING=m
++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
++CONFIG_NETFILTER_XT_MATCH_TIME=m
++CONFIG_NETFILTER_XT_MATCH_U32=m
++CONFIG_NETFILTER_XT_MATCH_OSF=m
++CONFIG_IP_VS=m
++# CONFIG_IP_VS_IPV6 is not set
++# CONFIG_IP_VS_DEBUG is not set
++CONFIG_IP_VS_TAB_BITS=12
++
++#
++# IPVS transport protocol load balancing support
++#
++CONFIG_IP_VS_PROTO_TCP=y
++CONFIG_IP_VS_PROTO_UDP=y
++CONFIG_IP_VS_PROTO_AH_ESP=y
++CONFIG_IP_VS_PROTO_ESP=y
++CONFIG_IP_VS_PROTO_AH=y
++
++#
++# IPVS scheduler
++#
++CONFIG_IP_VS_RR=m
++CONFIG_IP_VS_WRR=m
++CONFIG_IP_VS_LC=m
++CONFIG_IP_VS_WLC=m
++CONFIG_IP_VS_LBLC=m
++CONFIG_IP_VS_LBLCR=m
++CONFIG_IP_VS_DH=m
++CONFIG_IP_VS_SH=m
++CONFIG_IP_VS_SED=m
++CONFIG_IP_VS_NQ=m
++
++#
++# IPVS application helper
++#
++CONFIG_IP_VS_FTP=m
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_NF_DEFRAG_IPV4=m
++CONFIG_NF_CONNTRACK_IPV4=m
++CONFIG_NF_CONNTRACK_PROC_COMPAT=y
++CONFIG_IP_NF_QUEUE=m
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_ADDRTYPE=m
++CONFIG_IP_NF_MATCH_AH=m
++CONFIG_IP_NF_MATCH_ECN=m
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_NF_NAT=m
++CONFIG_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_NF_NAT_SNMP_BASIC=m
++CONFIG_NF_NAT_PROTO_DCCP=m
++CONFIG_NF_NAT_PROTO_GRE=m
++CONFIG_NF_NAT_PROTO_UDPLITE=m
++CONFIG_NF_NAT_PROTO_SCTP=m
++CONFIG_NF_NAT_FTP=m
++CONFIG_NF_NAT_IRC=m
++CONFIG_NF_NAT_TFTP=m
++CONFIG_NF_NAT_AMANDA=m
++CONFIG_NF_NAT_PPTP=m
++CONFIG_NF_NAT_H323=m
++CONFIG_NF_NAT_SIP=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_CLUSTERIP=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++
++#
++# IPv6: Netfilter Configuration
++#
++CONFIG_NF_CONNTRACK_IPV6=m
++CONFIG_IP6_NF_QUEUE=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_AH=m
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++CONFIG_IP6_NF_MATCH_MH=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_TARGET_HL=m
++CONFIG_IP6_NF_TARGET_LOG=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_REJECT=m
++CONFIG_IP6_NF_MANGLE=m
++CONFIG_IP6_NF_RAW=m
++# CONFIG_BRIDGE_NF_EBTABLES is not set
++# CONFIG_IP_DCCP is not set
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
++# CONFIG_RDS is not set
++# CONFIG_TIPC is not set
++CONFIG_ATM=m
++CONFIG_ATM_CLIP=m
++# CONFIG_ATM_CLIP_NO_ICMP is not set
++CONFIG_ATM_LANE=m
++CONFIG_ATM_MPOA=m
++CONFIG_ATM_BR2684=m
++# CONFIG_ATM_BR2684_IPFILTER is not set
++CONFIG_STP=m
++CONFIG_BRIDGE=m
++# CONFIG_NET_DSA is not set
++CONFIG_VLAN_8021Q=m
++# CONFIG_VLAN_8021Q_GVRP is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++CONFIG_LLC2=m
++CONFIG_IPX=m
++# CONFIG_IPX_INTERN is not set
++CONFIG_ATALK=m
++CONFIG_DEV_APPLETALK=m
++CONFIG_IPDDP=m
++# CONFIG_IPDDP_ENCAP is not set
++# CONFIG_IPDDP_DECAP is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++CONFIG_WAN_ROUTER=m
++CONFIG_PHONET=m
++CONFIG_IEEE802154=m
++CONFIG_NET_SCHED=y
++
++#
++# Queueing/Scheduling
++#
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_ATM=m
++CONFIG_NET_SCH_PRIO=m
++CONFIG_NET_SCH_MULTIQ=m
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++CONFIG_NET_SCH_DRR=m
++
++#
++# Classification
++#
++CONFIG_NET_CLS=y
++CONFIG_NET_CLS_BASIC=m
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_ROUTE=y
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++# CONFIG_CLS_U32_PERF is not set
++# CONFIG_CLS_U32_MARK is not set