summaryrefslogtreecommitdiff
path: root/target/foxboard/patches
diff options
context:
space:
mode:
authorWaldemar Brodkorb <wbx@openadk.org>2010-05-29 14:29:22 +0200
committerWaldemar Brodkorb <wbx@openadk.org>2010-05-29 14:29:22 +0200
commit92dd4fee15cb7c33868c7d7213f82136955397b1 (patch)
treed3a7425301688d031af4e1bc3fa880ec07ff580c /target/foxboard/patches
parent8dc970500b284b1e211551f0492adf5a99f4d715 (diff)
upgrade all targets to Linux 2.6.34
Diffstat (limited to 'target/foxboard/patches')
-rw-r--r--target/foxboard/patches/cris.patch6537
1 files changed, 64 insertions, 6473 deletions
diff --git a/target/foxboard/patches/cris.patch b/target/foxboard/patches/cris.patch
index 3c6bca534..1a4e109e5 100644
--- a/target/foxboard/patches/cris.patch
+++ b/target/foxboard/patches/cris.patch
@@ -1,6 +1,6 @@
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.32/arch/cris/arch-v10/drivers/axisflashmap.c
---- linux-2.6.32.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/drivers/axisflashmap.c 2010-01-10 14:34:37.376309632 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.34/arch/cris/arch-v10/drivers/axisflashmap.c
+--- linux-2.6.34.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/drivers/axisflashmap.c 2010-05-25 19:41:49.324723145 +0200
@@ -113,7 +113,7 @@
/* If no partition-table was found, we use this default-set. */
@@ -146,9 +146,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.
return err;
}
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.32/arch/cris/arch-v10/drivers/ds1302.c
---- linux-2.6.32.orig/arch/cris/arch-v10/drivers/ds1302.c 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/drivers/ds1302.c 2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.34/arch/cris/arch-v10/drivers/ds1302.c
+--- linux-2.6.34.orig/arch/cris/arch-v10/drivers/ds1302.c 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/drivers/ds1302.c 2010-05-25 19:41:49.361720375 +0200
@@ -21,6 +21,7 @@
#include <linux/delay.h>
#include <linux/bcd.h>
@@ -181,9 +181,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.32/arc
return 0;
}
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.32/arch/cris/arch-v10/drivers/gpio.c
---- linux-2.6.32.orig/arch/cris/arch-v10/drivers/gpio.c 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/drivers/gpio.c 2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.34/arch/cris/arch-v10/drivers/gpio.c
+--- linux-2.6.34.orig/arch/cris/arch-v10/drivers/gpio.c 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/drivers/gpio.c 2010-05-25 19:41:49.427216846 +0200
@@ -21,6 +21,7 @@
#include <linux/poll.h>
#include <linux/init.h>
@@ -217,18 +217,18 @@ diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.32/arch/
/* Clear all leds */
#if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS)
CRIS_LED_NETWORK_SET(0);
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/lib/hw_settings.S linux-2.6.32/arch/cris/arch-v10/lib/hw_settings.S
---- linux-2.6.32.orig/arch/cris/arch-v10/lib/hw_settings.S 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/lib/hw_settings.S 2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/lib/hw_settings.S linux-2.6.34/arch/cris/arch-v10/lib/hw_settings.S
+--- linux-2.6.34.orig/arch/cris/arch-v10/lib/hw_settings.S 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/lib/hw_settings.S 2010-05-25 19:41:49.485343082 +0200
@@ -60,3 +60,5 @@
.dword R_PORT_PB_SET
.dword PB_SET_VALUE
.dword 0 ; No more register values
+ .ascii "ACME_PART_MAGIC"
+ .dword 0xdeadc0de
-diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/mm/init.c linux-2.6.32/arch/cris/arch-v10/mm/init.c
---- linux-2.6.32.orig/arch/cris/arch-v10/mm/init.c 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/arch-v10/mm/init.c 2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/arch-v10/mm/init.c linux-2.6.34/arch/cris/arch-v10/mm/init.c
+--- linux-2.6.34.orig/arch/cris/arch-v10/mm/init.c 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/arch-v10/mm/init.c 2010-05-25 19:41:49.522223225 +0200
@@ -184,6 +184,9 @@
free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
@@ -239,9 +239,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/arch-v10/mm/init.c linux-2.6.32/arch/cris/
/* Initialize remaps of some I/O-ports. It is important that this
* is called before any driver is initialized.
-diff -Nur linux-2.6.32.orig/arch/cris/boot/compressed/Makefile linux-2.6.32/arch/cris/boot/compressed/Makefile
---- linux-2.6.32.orig/arch/cris/boot/compressed/Makefile 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/boot/compressed/Makefile 2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/boot/compressed/Makefile linux-2.6.34/arch/cris/boot/compressed/Makefile
+--- linux-2.6.34.orig/arch/cris/boot/compressed/Makefile 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/boot/compressed/Makefile 2010-05-25 19:41:49.562223178 +0200
@@ -18,7 +18,7 @@
OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
@@ -251,9 +251,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/boot/compressed/Makefile linux-2.6.32/arch
quiet_cmd_image = BUILD $@
cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-diff -Nur linux-2.6.32.orig/arch/cris/boot/compressed/misc.c linux-2.6.32/arch/cris/boot/compressed/misc.c
---- linux-2.6.32.orig/arch/cris/boot/compressed/misc.c 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/boot/compressed/misc.c 2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/boot/compressed/misc.c linux-2.6.34/arch/cris/boot/compressed/misc.c
+--- linux-2.6.34.orig/arch/cris/boot/compressed/misc.c 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/boot/compressed/misc.c 2010-05-25 19:41:49.602223136 +0200
@@ -106,7 +106,7 @@
static void flush_window(void);
@@ -304,9 +304,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/boot/compressed/misc.c linux-2.6.32/arch/c
- puts("Done. Now booting the kernel\n");
+ putstr("Done. Now booting the kernel\n");
}
-diff -Nur linux-2.6.32.orig/arch/cris/boot/Makefile linux-2.6.32/arch/cris/boot/Makefile
---- linux-2.6.32.orig/arch/cris/boot/Makefile 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/boot/Makefile 2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/boot/Makefile linux-2.6.34/arch/cris/boot/Makefile
+--- linux-2.6.34.orig/arch/cris/boot/Makefile 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/boot/Makefile 2010-05-25 19:41:49.642223132 +0200
@@ -5,7 +5,7 @@
objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
@@ -324,10 +324,10 @@ diff -Nur linux-2.6.32.orig/arch/cris/boot/Makefile linux-2.6.32/arch/cris/boot/
$(obj)/zImage: $(obj)/compressed/vmlinux
@cp $< $@
-diff -Nur linux-2.6.32.orig/arch/cris/Kconfig linux-2.6.32/arch/cris/Kconfig
---- linux-2.6.32.orig/arch/cris/Kconfig 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/Kconfig 2010-01-10 13:41:59.256309588 +0100
-@@ -168,6 +168,12 @@
+diff -Nur linux-2.6.34.orig/arch/cris/Kconfig linux-2.6.34/arch/cris/Kconfig
+--- linux-2.6.34.orig/arch/cris/Kconfig 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/Kconfig 2010-05-25 19:41:49.692223112 +0200
+@@ -174,6 +174,12 @@
help
Size of DRAM (decimal in MB) typically 2, 8 or 16.
@@ -340,7 +340,7 @@ diff -Nur linux-2.6.32.orig/arch/cris/Kconfig linux-2.6.32/arch/cris/Kconfig
config ETRAX_VMEM_SIZE
int "Video memory size (dec, in MB)"
depends on ETRAX_ARCH_V32 && !ETRAXFS
-@@ -273,7 +279,7 @@
+@@ -279,7 +285,7 @@
select MTD_CFI_AMDSTD
select MTD_JEDECPROBE if ETRAX_ARCH_V32
select MTD_CHAR
@@ -349,7 +349,7 @@ diff -Nur linux-2.6.32.orig/arch/cris/Kconfig linux-2.6.32/arch/cris/Kconfig
select MTD_PARTITIONS
select MTD_CONCAT
select MTD_COMPLEX_MAPPINGS
-@@ -662,6 +668,11 @@
+@@ -668,6 +674,11 @@
source "drivers/ide/Kconfig"
@@ -361,9 +361,9 @@ diff -Nur linux-2.6.32.orig/arch/cris/Kconfig linux-2.6.32/arch/cris/Kconfig
source "drivers/net/Kconfig"
source "drivers/i2c/Kconfig"
-diff -Nur linux-2.6.32.orig/arch/cris/Makefile linux-2.6.32/arch/cris/Makefile
---- linux-2.6.32.orig/arch/cris/Makefile 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/arch/cris/Makefile 2010-01-10 13:41:59.256309588 +0100
+diff -Nur linux-2.6.34.orig/arch/cris/Makefile linux-2.6.34/arch/cris/Makefile
+--- linux-2.6.34.orig/arch/cris/Makefile 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/arch/cris/Makefile 2010-05-25 19:41:49.751101855 +0200
@@ -40,10 +40,10 @@
LD = $(CROSS_COMPILE)ld -mcrislinux
@@ -377,10 +377,10 @@ diff -Nur linux-2.6.32.orig/arch/cris/Makefile linux-2.6.32/arch/cris/Makefile
KBUILD_CPPFLAGS += $(inc)
ifdef CONFIG_FRAME_POINTER
-diff -Nur linux-2.6.32.orig/drivers/net/cris/eth_v10.c linux-2.6.32/drivers/net/cris/eth_v10.c
---- linux-2.6.32.orig/drivers/net/cris/eth_v10.c 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/drivers/net/cris/eth_v10.c 2010-01-10 13:41:59.256309588 +0100
-@@ -1725,7 +1725,7 @@
+diff -Nur linux-2.6.34.orig/drivers/net/cris/eth_v10.c linux-2.6.34/drivers/net/cris/eth_v10.c
+--- linux-2.6.34.orig/drivers/net/cris/eth_v10.c 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/net/cris/eth_v10.c 2010-05-25 19:41:49.809234068 +0200
+@@ -1722,7 +1722,7 @@
static void
e100_netpoll(struct net_device* netdev)
{
@@ -389,1773 +389,9 @@ diff -Nur linux-2.6.32.orig/drivers/net/cris/eth_v10.c linux-2.6.32/drivers/net/
}
#endif
-diff -Nur linux-2.6.32.orig/drivers/net/cris/eth_v10.c.orig linux-2.6.32/drivers/net/cris/eth_v10.c.orig
---- linux-2.6.32.orig/drivers/net/cris/eth_v10.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/net/cris/eth_v10.c.orig 2009-12-03 04:51:21.000000000 +0100
-@@ -0,0 +1,1760 @@
-+/*
-+ * e100net.c: A network driver for the ETRAX 100LX network controller.
-+ *
-+ * Copyright (c) 1998-2002 Axis Communications AB.
-+ *
-+ * The outline of this driver comes from skeleton.c.
-+ *
-+ */
-+
-+
-+#include <linux/module.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/types.h>
-+#include <linux/fcntl.h>
-+#include <linux/interrupt.h>
-+#include <linux/ptrace.h>
-+#include <linux/ioport.h>
-+#include <linux/in.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/spinlock.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/bitops.h>
-+
-+#include <linux/if.h>
-+#include <linux/mii.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/ethtool.h>
-+
-+#include <arch/svinto.h>/* DMA and register descriptions */
-+#include <asm/io.h> /* CRIS_LED_* I/O functions */
-+#include <asm/irq.h>
-+#include <asm/dma.h>
-+#include <asm/system.h>
-+#include <asm/ethernet.h>
-+#include <asm/cache.h>
-+#include <arch/io_interface_mux.h>
-+
-+//#define ETHDEBUG
-+#define D(x)
-+
-+/*
-+ * The name of the card. Is used for messages and in the requests for
-+ * io regions, irqs and dma channels
-+ */
-+
-+static const char* cardname = "ETRAX 100LX built-in ethernet controller";
-+
-+/* A default ethernet address. Highlevel SW will set the real one later */
-+
-+static struct sockaddr default_mac = {
-+ 0,
-+ { 0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00 }
-+};
-+
-+/* Information that need to be kept for each board. */
-+struct net_local {
-+ struct net_device_stats stats;
-+ struct mii_if_info mii_if;
-+
-+ /* Tx control lock. This protects the transmit buffer ring
-+ * state along with the "tx full" state of the driver. This
-+ * means all netif_queue flow control actions are protected
-+ * by this lock as well.
-+ */
-+ spinlock_t lock;
-+
-+ spinlock_t led_lock; /* Protect LED state */
-+ spinlock_t transceiver_lock; /* Protect transceiver state. */
-+};
-+
-+typedef struct etrax_eth_descr
-+{
-+ etrax_dma_descr descr;
-+ struct sk_buff* skb;
-+} etrax_eth_descr;
-+
-+/* Some transceivers requires special handling */
-+struct transceiver_ops
-+{
-+ unsigned int oui;
-+ void (*check_speed)(struct net_device* dev);
-+ void (*check_duplex)(struct net_device* dev);
-+};
-+
-+/* Duplex settings */
-+enum duplex
-+{
-+ half,
-+ full,
-+ autoneg
-+};
-+
-+/* Dma descriptors etc. */
-+
-+#define MAX_MEDIA_DATA_SIZE 1522
-+
-+#define MIN_PACKET_LEN 46
-+#define ETHER_HEAD_LEN 14
-+
-+/*
-+** MDIO constants.
-+*/
-+#define MDIO_START 0x1
-+#define MDIO_READ 0x2
-+#define MDIO_WRITE 0x1
-+#define MDIO_PREAMBLE 0xfffffffful
-+
-+/* Broadcom specific */
-+#define MDIO_AUX_CTRL_STATUS_REG 0x18
-+#define MDIO_BC_FULL_DUPLEX_IND 0x1
-+#define MDIO_BC_SPEED 0x2
-+
-+/* TDK specific */
-+#define MDIO_TDK_DIAGNOSTIC_REG 18
-+#define MDIO_TDK_DIAGNOSTIC_RATE 0x400
-+#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800
-+
-+/*Intel LXT972A specific*/
-+#define MDIO_INT_STATUS_REG_2 0x0011
-+#define MDIO_INT_FULL_DUPLEX_IND (1 << 9)
-+#define MDIO_INT_SPEED (1 << 14)
-+
-+/* Network flash constants */
-+#define NET_FLASH_TIME (HZ/50) /* 20 ms */
-+#define NET_FLASH_PAUSE (HZ/100) /* 10 ms */
-+#define NET_LINK_UP_CHECK_INTERVAL (2*HZ) /* 2 s */
-+#define NET_DUPLEX_CHECK_INTERVAL (2*HZ) /* 2 s */
-+
-+#define NO_NETWORK_ACTIVITY 0
-+#define NETWORK_ACTIVITY 1
-+
-+#define NBR_OF_RX_DESC 32
-+#define NBR_OF_TX_DESC 16
-+
-+/* Large packets are sent directly to upper layers while small packets are */
-+/* copied (to reduce memory waste). The following constant decides the breakpoint */
-+#define RX_COPYBREAK 256
-+
-+/* Due to a chip bug we need to flush the cache when descriptors are returned */
-+/* to the DMA. To decrease performance impact we return descriptors in chunks. */
-+/* The following constant determines the number of descriptors to return. */
-+#define RX_QUEUE_THRESHOLD NBR_OF_RX_DESC/2
-+
-+#define GET_BIT(bit,val) (((val) >> (bit)) & 0x01)
-+
-+/* Define some macros to access ETRAX 100 registers */
-+#define SETF(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
-+ IO_FIELD_(reg##_, field##_, val)
-+#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
-+ IO_STATE_(reg##_, field##_, _##val)
-+
-+static etrax_eth_descr *myNextRxDesc; /* Points to the next descriptor to
-+ to be processed */
-+static etrax_eth_descr *myLastRxDesc; /* The last processed descriptor */
-+
-+static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32)));
-+
-+static etrax_eth_descr* myFirstTxDesc; /* First packet not yet sent */
-+static etrax_eth_descr* myLastTxDesc; /* End of send queue */
-+static etrax_eth_descr* myNextTxDesc; /* Next descriptor to use */
-+static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32)));
-+
-+static unsigned int network_rec_config_shadow = 0;
-+
-+static unsigned int network_tr_ctrl_shadow = 0;
-+
-+/* Network speed indication. */
-+static DEFINE_TIMER(speed_timer, NULL, 0, 0);
-+static DEFINE_TIMER(clear_led_timer, NULL, 0, 0);
-+static int current_speed; /* Speed read from transceiver */
-+static int current_speed_selection; /* Speed selected by user */
-+static unsigned long led_next_time;
-+static int led_active;
-+static int rx_queue_len;
-+
-+/* Duplex */
-+static DEFINE_TIMER(duplex_timer, NULL, 0, 0);
-+static int full_duplex;
-+static enum duplex current_duplex;
-+
-+/* Index to functions, as function prototypes. */
-+
-+static int etrax_ethernet_init(void);
-+
-+static int e100_open(struct net_device *dev);
-+static int e100_set_mac_address(struct net_device *dev, void *addr);
-+static int e100_send_packet(struct sk_buff *skb, struct net_device *dev);
-+static irqreturn_t e100rxtx_interrupt(int irq, void *dev_id);
-+static irqreturn_t e100nw_interrupt(int irq, void *dev_id);
-+static void e100_rx(struct net_device *dev);
-+static int e100_close(struct net_device *dev);
-+static int e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-+static int e100_set_config(struct net_device* dev, struct ifmap* map);
-+static void e100_tx_timeout(struct net_device *dev);
-+static struct net_device_stats *e100_get_stats(struct net_device *dev);
-+static void set_multicast_list(struct net_device *dev);
-+static void e100_hardware_send_packet(struct net_local* np, char *buf, int length);
-+static void update_rx_stats(struct net_device_stats *);
-+static void update_tx_stats(struct net_device_stats *);
-+static int e100_probe_transceiver(struct net_device* dev);
-+
-+static void e100_check_speed(unsigned long priv);
-+static void e100_set_speed(struct net_device* dev, unsigned long speed);
-+static void e100_check_duplex(unsigned long priv);
-+static void e100_set_duplex(struct net_device* dev, enum duplex);
-+static void e100_negotiate(struct net_device* dev);
-+
-+static int e100_get_mdio_reg(struct net_device *dev, int phy_id, int location);
-+static void e100_set_mdio_reg(struct net_device *dev, int phy_id, int location, int value);
-+
-+static void e100_send_mdio_cmd(unsigned short cmd, int write_cmd);
-+static void e100_send_mdio_bit(unsigned char bit);
-+static unsigned char e100_receive_mdio_bit(void);
-+static void e100_reset_transceiver(struct net_device* net);
-+
-+static void e100_clear_network_leds(unsigned long dummy);
-+static void e100_set_network_leds(int active);
-+
-+static const struct ethtool_ops e100_ethtool_ops;
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+static void dummy_check_speed(struct net_device* dev);
-+static void dummy_check_duplex(struct net_device* dev);
-+#else
-+static void broadcom_check_speed(struct net_device* dev);
-+static void broadcom_check_duplex(struct net_device* dev);
-+static void tdk_check_speed(struct net_device* dev);
-+static void tdk_check_duplex(struct net_device* dev);
-+static void intel_check_speed(struct net_device* dev);
-+static void intel_check_duplex(struct net_device* dev);
-+static void generic_check_speed(struct net_device* dev);
-+static void generic_check_duplex(struct net_device* dev);
-+#endif
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void e100_netpoll(struct net_device* dev);
-+#endif
-+
-+static int autoneg_normal = 1;
-+
-+struct transceiver_ops transceivers[] =
-+{
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+ {0x0000, dummy_check_speed, dummy_check_duplex} /* Dummy */
-+#else
-+ {0x1018, broadcom_check_speed, broadcom_check_duplex}, /* Broadcom */
-+ {0xC039, tdk_check_speed, tdk_check_duplex}, /* TDK 2120 */
-+ {0x039C, tdk_check_speed, tdk_check_duplex}, /* TDK 2120C */
-+ {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/
-+ {0x0000, generic_check_speed, generic_check_duplex} /* Generic, must be last */
-+#endif
-+};
-+
-+struct transceiver_ops* transceiver = &transceivers[0];
-+
-+static const struct net_device_ops e100_netdev_ops = {
-+ .ndo_open = e100_open,
-+ .ndo_stop = e100_close,
-+ .ndo_start_xmit = e100_send_packet,
-+ .ndo_tx_timeout = e100_tx_timeout,
-+ .ndo_get_stats = e100_get_stats,
-+ .ndo_set_multicast_list = set_multicast_list,
-+ .ndo_do_ioctl = e100_ioctl,
-+ .ndo_set_mac_address = e100_set_mac_address,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_set_config = e100_set_config,
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+ .ndo_poll_controller = e100_netpoll,
-+#endif
-+};
-+
-+#define tx_done(dev) (*R_DMA_CH0_CMD == 0)
-+
-+/*
-+ * Check for a network adaptor of this type, and return '0' if one exists.
-+ * If dev->base_addr == 0, probe all likely locations.
-+ * If dev->base_addr == 1, always return failure.
-+ * If dev->base_addr == 2, allocate space for the device and return success
-+ * (detachable devices only).
-+ */
-+
-+static int __init
-+etrax_ethernet_init(void)
-+{
-+ struct net_device *dev;
-+ struct net_local* np;
-+ int i, err;
-+
-+ printk(KERN_INFO
-+ "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2007 Axis Communications AB\n");
-+
-+ if (cris_request_io_interface(if_eth, cardname)) {
-+ printk(KERN_CRIT "etrax_ethernet_init failed to get IO interface\n");
-+ return -EBUSY;
-+ }
-+
-+ dev = alloc_etherdev(sizeof(struct net_local));
-+ if (!dev)
-+ return -ENOMEM;
-+
-+ np = netdev_priv(dev);
-+
-+ /* we do our own locking */
-+ dev->features |= NETIF_F_LLTX;
-+
-+ dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */
-+
-+ /* now setup our etrax specific stuff */
-+
-+ dev->irq = NETWORK_DMA_RX_IRQ_NBR; /* we really use DMATX as well... */
-+ dev->dma = NETWORK_RX_DMA_NBR;
-+
-+ /* fill in our handlers so the network layer can talk to us in the future */
-+
-+ dev->ethtool_ops = &e100_ethtool_ops;
-+ dev->netdev_ops = &e100_netdev_ops;
-+
-+ spin_lock_init(&np->lock);
-+ spin_lock_init(&np->led_lock);
-+ spin_lock_init(&np->transceiver_lock);
-+
-+ /* Initialise the list of Etrax DMA-descriptors */
-+
-+ /* Initialise receive descriptors */
-+
-+ for (i = 0; i < NBR_OF_RX_DESC; i++) {
-+ /* Allocate two extra cachelines to make sure that buffer used
-+ * by DMA does not share cacheline with any other data (to
-+ * avoid cache bug)
-+ */
-+ RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
-+ if (!RxDescList[i].skb)
-+ return -ENOMEM;
-+ RxDescList[i].descr.ctrl = 0;
-+ RxDescList[i].descr.sw_len = MAX_MEDIA_DATA_SIZE;
-+ RxDescList[i].descr.next = virt_to_phys(&RxDescList[i + 1]);
-+ RxDescList[i].descr.buf = L1_CACHE_ALIGN(virt_to_phys(RxDescList[i].skb->data));
-+ RxDescList[i].descr.status = 0;
-+ RxDescList[i].descr.hw_len = 0;
-+ prepare_rx_descriptor(&RxDescList[i].descr);
-+ }
-+
-+ RxDescList[NBR_OF_RX_DESC - 1].descr.ctrl = d_eol;
-+ RxDescList[NBR_OF_RX_DESC - 1].descr.next = virt_to_phys(&RxDescList[0]);
-+ rx_queue_len = 0;
-+
-+ /* Initialize transmit descriptors */
-+ for (i = 0; i < NBR_OF_TX_DESC; i++) {
-+ TxDescList[i].descr.ctrl = 0;
-+ TxDescList[i].descr.sw_len = 0;
-+ TxDescList[i].descr.next = virt_to_phys(&TxDescList[i + 1].descr);
-+ TxDescList[i].descr.buf = 0;
-+ TxDescList[i].descr.status = 0;
-+ TxDescList[i].descr.hw_len = 0;
-+ TxDescList[i].skb = 0;
-+ }
-+
-+ TxDescList[NBR_OF_TX_DESC - 1].descr.ctrl = d_eol;
-+ TxDescList[NBR_OF_TX_DESC - 1].descr.next = virt_to_phys(&TxDescList[0].descr);
-+
-+ /* Initialise initial pointers */
-+
-+ myNextRxDesc = &RxDescList[0];
-+ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
-+ myFirstTxDesc = &TxDescList[0];
-+ myNextTxDesc = &TxDescList[0];
-+ myLastTxDesc = &TxDescList[NBR_OF_TX_DESC - 1];
-+
-+ /* Register device */
-+ err = register_netdev(dev);
-+ if (err) {
-+ free_netdev(dev);
-+ return err;
-+ }
-+
-+ /* set the default MAC address */
-+
-+ e100_set_mac_address(dev, &default_mac);
-+
-+ /* Initialize speed indicator stuff. */
-+
-+ current_speed = 10;
-+ current_speed_selection = 0; /* Auto */
-+ speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+ speed_timer.data = (unsigned long)dev;
-+ speed_timer.function = e100_check_speed;
-+
-+ clear_led_timer.function = e100_clear_network_leds;
-+ clear_led_timer.data = (unsigned long)dev;
-+
-+ full_duplex = 0;
-+ current_duplex = autoneg;
-+ duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+ duplex_timer.data = (unsigned long)dev;
-+ duplex_timer.function = e100_check_duplex;
-+
-+ /* Initialize mii interface */
-+ np->mii_if.phy_id_mask = 0x1f;
-+ np->mii_if.reg_num_mask = 0x1f;
-+ np->mii_if.dev = dev;
-+ np->mii_if.mdio_read = e100_get_mdio_reg;
-+ np->mii_if.mdio_write = e100_set_mdio_reg;
-+
-+ /* Initialize group address registers to make sure that no */
-+ /* unwanted addresses are matched */
-+ *R_NETWORK_GA_0 = 0x00000000;
-+ *R_NETWORK_GA_1 = 0x00000000;
-+
-+ /* Initialize next time the led can flash */
-+ led_next_time = jiffies;
-+ return 0;
-+}
-+
-+/* set MAC address of the interface. called from the core after a
-+ * SIOCSIFADDR ioctl, and from the bootup above.
-+ */
-+
-+static int
-+e100_set_mac_address(struct net_device *dev, void *p)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+ struct sockaddr *addr = p;
-+
-+ spin_lock(&np->lock); /* preemption protection */
-+
-+ /* remember it */
-+
-+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-+
-+ /* Write it to the hardware.
-+ * Note the way the address is wrapped:
-+ * *R_NETWORK_SA_0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24);
-+ * *R_NETWORK_SA_1 = a0_4 | (a0_5 << 8);
-+ */
-+
-+ *R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
-+ (dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24);
-+ *R_NETWORK_SA_1 = dev->dev_addr[4] | (dev->dev_addr[5] << 8);
-+ *R_NETWORK_SA_2 = 0;
-+
-+ /* show it in the log as well */
-+
-+ printk(KERN_INFO "%s: changed MAC to %pM\n", dev->name, dev->dev_addr);
-+
-+ spin_unlock(&np->lock);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Open/initialize the board. This is called (in the current kernel)
-+ * sometime after booting when the 'ifconfig' program is run.
-+ *
-+ * This routine should set everything up anew at each open, even
-+ * registers that "should" only need to be set once at boot, so that
-+ * there is non-reboot way to recover if something goes wrong.
-+ */
-+
-+static int
-+e100_open(struct net_device *dev)
-+{
-+ unsigned long flags;
-+
-+ /* enable the MDIO output pin */
-+
-+ *R_NETWORK_MGM_CTRL = IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable);
-+
-+ *R_IRQ_MASK0_CLR =
-+ IO_STATE(R_IRQ_MASK0_CLR, overrun, clr) |
-+ IO_STATE(R_IRQ_MASK0_CLR, underrun, clr) |
-+ IO_STATE(R_IRQ_MASK0_CLR, excessive_col, clr);
-+
-+ /* clear dma0 and 1 eop and descr irq masks */
-+ *R_IRQ_MASK2_CLR =
-+ IO_STATE(R_IRQ_MASK2_CLR, dma0_descr, clr) |
-+ IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
-+ IO_STATE(R_IRQ_MASK2_CLR, dma1_descr, clr) |
-+ IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
-+
-+ /* Reset and wait for the DMA channels */
-+
-+ RESET_DMA(NETWORK_TX_DMA_NBR);
-+ RESET_DMA(NETWORK_RX_DMA_NBR);
-+ WAIT_DMA(NETWORK_TX_DMA_NBR);
-+ WAIT_DMA(NETWORK_RX_DMA_NBR);
-+
-+ /* Initialise the etrax network controller */
-+
-+ /* allocate the irq corresponding to the receiving DMA */
-+
-+ if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt,
-+ IRQF_SAMPLE_RANDOM, cardname, (void *)dev)) {
-+ goto grace_exit0;
-+ }
-+
-+ /* allocate the irq corresponding to the transmitting DMA */
-+
-+ if (request_irq(NETWORK_DMA_TX_IRQ_NBR, e100rxtx_interrupt, 0,
-+ cardname, (void *)dev)) {
-+ goto grace_exit1;
-+ }
-+
-+ /* allocate the irq corresponding to the network errors etc */
-+
-+ if (request_irq(NETWORK_STATUS_IRQ_NBR, e100nw_interrupt, 0,
-+ cardname, (void *)dev)) {
-+ goto grace_exit2;
-+ }
-+
-+ /*
-+ * Always allocate the DMA channels after the IRQ,
-+ * and clean up on failure.
-+ */
-+
-+ if (cris_request_dma(NETWORK_TX_DMA_NBR,
-+ cardname,
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_eth)) {
-+ goto grace_exit3;
-+ }
-+
-+ if (cris_request_dma(NETWORK_RX_DMA_NBR,
-+ cardname,
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_eth)) {
-+ goto grace_exit4;
-+ }
-+
-+ /* give the HW an idea of what MAC address we want */
-+
-+ *R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
-+ (dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24);
-+ *R_NETWORK_SA_1 = dev->dev_addr[4] | (dev->dev_addr[5] << 8);
-+ *R_NETWORK_SA_2 = 0;
-+
-+#if 0
-+ /* use promiscuous mode for testing */
-+ *R_NETWORK_GA_0 = 0xffffffff;
-+ *R_NETWORK_GA_1 = 0xffffffff;
-+
-+ *R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */
-+#else
-+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, max_size, size1522);
-+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive);
-+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable);
-+ SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
-+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+#endif
-+
-+ *R_NETWORK_GEN_CONFIG =
-+ IO_STATE(R_NETWORK_GEN_CONFIG, phy, mii_clk) |
-+ IO_STATE(R_NETWORK_GEN_CONFIG, enable, on);
-+
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, delay, none);
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, cancel, dont);
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, cd, enable);
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, retry, enable);
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, pad, enable);
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable);
-+ *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
-+
-+ local_irq_save(flags);
-+
-+ /* enable the irq's for ethernet DMA */
-+
-+ *R_IRQ_MASK2_SET =
-+ IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) |
-+ IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set);
-+
-+ *R_IRQ_MASK0_SET =
-+ IO_STATE(R_IRQ_MASK0_SET, overrun, set) |
-+ IO_STATE(R_IRQ_MASK0_SET, underrun, set) |
-+ IO_STATE(R_IRQ_MASK0_SET, excessive_col, set);
-+
-+ /* make sure the irqs are cleared */
-+
-+ *R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
-+ *R_DMA_CH1_CLR_INTR = IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do);
-+
-+ /* make sure the rec and transmit error counters are cleared */
-+
-+ (void)*R_REC_COUNTERS; /* dummy read */
-+ (void)*R_TR_COUNTERS; /* dummy read */
-+
-+ /* start the receiving DMA channel so we can receive packets from now on */
-+
-+ *R_DMA_CH1_FIRST = virt_to_phys(myNextRxDesc);
-+ *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, start);
-+
-+ /* Set up transmit DMA channel so it can be restarted later */
-+
-+ *R_DMA_CH0_FIRST = 0;
-+ *R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
-+ netif_start_queue(dev);
-+
-+ local_irq_restore(flags);
-+
-+ /* Probe for transceiver */
-+ if (e100_probe_transceiver(dev))
-+ goto grace_exit5;
-+
-+ /* Start duplex/speed timers */
-+ add_timer(&speed_timer);
-+ add_timer(&duplex_timer);
-+
-+ /* We are now ready to accept transmit requeusts from
-+ * the queueing layer of the networking.
-+ */
-+ netif_carrier_on(dev);
-+
-+ return 0;
-+
-+grace_exit5:
-+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
-+grace_exit4:
-+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
-+grace_exit3:
-+ free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
-+grace_exit2:
-+ free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
-+grace_exit1:
-+ free_irq(NETWORK_DMA_RX_IRQ_NBR, (void *)dev);
-+grace_exit0:
-+ return -EAGAIN;
-+}
-+
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+static void
-+dummy_check_speed(struct net_device* dev)
-+{
-+ current_speed = 100;
-+}
-+#else
-+static void
-+generic_check_speed(struct net_device* dev)
-+{
-+ unsigned long data;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+ if ((data & ADVERTISE_100FULL) ||
-+ (data & ADVERTISE_100HALF))
-+ current_speed = 100;
-+ else
-+ current_speed = 10;
-+}
-+
-+static void
-+tdk_check_speed(struct net_device* dev)
-+{
-+ unsigned long data;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_TDK_DIAGNOSTIC_REG);
-+ current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10);
-+}
-+
-+static void
-+broadcom_check_speed(struct net_device* dev)
-+{
-+ unsigned long data;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_AUX_CTRL_STATUS_REG);
-+ current_speed = (data & MDIO_BC_SPEED ? 100 : 10);
-+}
-+
-+static void
-+intel_check_speed(struct net_device* dev)
-+{
-+ unsigned long data;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_INT_STATUS_REG_2);
-+ current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
-+}
-+#endif
-+static void
-+e100_check_speed(unsigned long priv)
-+{
-+ struct net_device* dev = (struct net_device*)priv;
-+ struct net_local *np = netdev_priv(dev);
-+ static int led_initiated = 0;
-+ unsigned long data;
-+ int old_speed = current_speed;
-+
-+ spin_lock(&np->transceiver_lock);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR);
-+ if (!(data & BMSR_LSTATUS)) {
-+ current_speed = 0;
-+ } else {
-+ transceiver->check_speed(dev);
-+ }
-+
-+ spin_lock(&np->led_lock);
-+ if ((old_speed != current_speed) || !led_initiated) {
-+ led_initiated = 1;
-+ e100_set_network_leds(NO_NETWORK_ACTIVITY);
-+ if (current_speed)
-+ netif_carrier_on(dev);
-+ else
-+ netif_carrier_off(dev);
-+ }
-+ spin_unlock(&np->led_lock);
-+
-+ /* Reinitialize the timer. */
-+ speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+ add_timer(&speed_timer);
-+
-+ spin_unlock(&np->transceiver_lock);
-+}
-+
-+static void
-+e100_negotiate(struct net_device* dev)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+ unsigned short data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MII_ADVERTISE);
-+
-+ /* Discard old speed and duplex settings */
-+ data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL |
-+ ADVERTISE_10HALF | ADVERTISE_10FULL);
-+
-+ switch (current_speed_selection) {
-+ case 10:
-+ if (current_duplex == full)
-+ data |= ADVERTISE_10FULL;
-+ else if (current_duplex == half)
-+ data |= ADVERTISE_10HALF;
-+ else
-+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL;
-+ break;
-+
-+ case 100:
-+ if (current_duplex == full)
-+ data |= ADVERTISE_100FULL;
-+ else if (current_duplex == half)
-+ data |= ADVERTISE_100HALF;
-+ else
-+ data |= ADVERTISE_100HALF | ADVERTISE_100FULL;
-+ break;
-+
-+ case 0: /* Auto */
-+ if (current_duplex == full)
-+ data |= ADVERTISE_100FULL | ADVERTISE_10FULL;
-+ else if (current_duplex == half)
-+ data |= ADVERTISE_100HALF | ADVERTISE_10HALF;
-+ else
-+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
-+ ADVERTISE_100HALF | ADVERTISE_100FULL;
-+ break;
-+
-+ default: /* assume autoneg speed and duplex */
-+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
-+ ADVERTISE_100HALF | ADVERTISE_100FULL;
-+ break;
-+ }
-+
-+ e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+ if (autoneg_normal) {
-+ /* Renegotiate with link partner */
-+ data |= BMCR_ANENABLE | BMCR_ANRESTART;
-+ } else {
-+ /* Don't negotiate speed or duplex */
-+ data &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
-+
-+ /* Set speed and duplex static */
-+ if (current_speed_selection == 10)
-+ data &= ~BMCR_SPEED100;
-+ else
-+ data |= BMCR_SPEED100;
-+
-+ if (current_duplex != full)
-+ data &= ~BMCR_FULLDPLX;
-+ else
-+ data |= BMCR_FULLDPLX;
-+ }
-+ e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
-+}
-+
-+static void
-+e100_set_speed(struct net_device* dev, unsigned long speed)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->transceiver_lock);
-+ if (speed != current_speed_selection) {
-+ current_speed_selection = speed;
-+ e100_negotiate(dev);
-+ }
-+ spin_unlock(&np->transceiver_lock);
-+}
-+
-+static void
-+e100_check_duplex(unsigned long priv)
-+{
-+ struct net_device *dev = (struct net_device *)priv;
-+ struct net_local *np = netdev_priv(dev);
-+ int old_duplex;
-+
-+ spin_lock(&np->transceiver_lock);
-+ old_duplex = full_duplex;
-+ transceiver->check_duplex(dev);
-+ if (old_duplex != full_duplex) {
-+ /* Duplex changed */
-+ SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
-+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+ }
-+
-+ /* Reinitialize the timer. */
-+ duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+ add_timer(&duplex_timer);
-+ np->mii_if.full_duplex = full_duplex;
-+ spin_unlock(&np->transceiver_lock);
-+}
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+static void
-+dummy_check_duplex(struct net_device* dev)
-+{
-+ full_duplex = 1;
-+}
-+#else
-+static void
-+generic_check_duplex(struct net_device* dev)
-+{
-+ unsigned long data;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+ if ((data & ADVERTISE_10FULL) ||
-+ (data & ADVERTISE_100FULL))
-+ full_duplex = 1;
-+ else
-+ full_duplex = 0;
-+}
-+
-+static void
-+tdk_check_duplex(struct net_device* dev)
-+{
-+ unsigned long data;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_TDK_DIAGNOSTIC_REG);
-+ full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
-+}
-+
-+static void
-+broadcom_check_duplex(struct net_device* dev)
-+{
-+ unsigned long data;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_AUX_CTRL_STATUS_REG);
-+ full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+
-+static void
-+intel_check_duplex(struct net_device* dev)
-+{
-+ unsigned long data;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_INT_STATUS_REG_2);
-+ full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+#endif
-+static void
-+e100_set_duplex(struct net_device* dev, enum duplex new_duplex)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->transceiver_lock);
-+ if (new_duplex != current_duplex) {
-+ current_duplex = new_duplex;
-+ e100_negotiate(dev);
-+ }
-+ spin_unlock(&np->transceiver_lock);
-+}
-+
-+static int
-+e100_probe_transceiver(struct net_device* dev)
-+{
-+ int ret = 0;
-+
-+#if !defined(CONFIG_ETRAX_NO_PHY)
-+ unsigned int phyid_high;
-+ unsigned int phyid_low;
-+ unsigned int oui;
-+ struct transceiver_ops* ops = NULL;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->transceiver_lock);
-+
-+ /* Probe MDIO physical address */
-+ for (np->mii_if.phy_id = 0; np->mii_if.phy_id <= 31;
-+ np->mii_if.phy_id++) {
-+ if (e100_get_mdio_reg(dev,
-+ np->mii_if.phy_id, MII_BMSR) != 0xffff)
-+ break;
-+ }
-+ if (np->mii_if.phy_id == 32) {
-+ ret = -ENODEV;
-+ goto out;
-+ }
-+
-+ /* Get manufacturer */
-+ phyid_high = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID1);
-+ phyid_low = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID2);
-+ oui = (phyid_high << 6) | (phyid_low >> 10);
-+
-+ for (ops = &transceivers[0]; ops->oui; ops++) {
-+ if (ops->oui == oui)
-+ break;
-+ }
-+ transceiver = ops;
-+out:
-+ spin_unlock(&np->transceiver_lock);
-+#endif
-+ return ret;
-+}
-+
-+static int
-+e100_get_mdio_reg(struct net_device *dev, int phy_id, int location)
-+{
-+ unsigned short cmd; /* Data to be sent on MDIO port */
-+ int data; /* Data read from MDIO */
-+ int bitCounter;
-+
-+ /* Start of frame, OP Code, Physical Address, Register Address */
-+ cmd = (MDIO_START << 14) | (MDIO_READ << 12) | (phy_id << 7) |
-+ (location << 2);
-+
-+ e100_send_mdio_cmd(cmd, 0);
-+
-+ data = 0;
-+
-+ /* Data... */
-+ for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
-+ data |= (e100_receive_mdio_bit() << bitCounter);
-+ }
-+
-+ return data;
-+}
-+
-+static void
-+e100_set_mdio_reg(struct net_device *dev, int phy_id, int location, int value)
-+{
-+ int bitCounter;
-+ unsigned short cmd;
-+
-+ cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (phy_id << 7) |
-+ (location << 2);
-+
-+ e100_send_mdio_cmd(cmd, 1);
-+
-+ /* Data... */
-+ for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
-+ e100_send_mdio_bit(GET_BIT(bitCounter, value));
-+ }
-+
-+}
-+
-+static void
-+e100_send_mdio_cmd(unsigned short cmd, int write_cmd)
-+{
-+ int bitCounter;
-+ unsigned char data = 0x2;
-+
-+ /* Preamble */
-+ for (bitCounter = 31; bitCounter>= 0; bitCounter--)
-+ e100_send_mdio_bit(GET_BIT(bitCounter, MDIO_PREAMBLE));
-+
-+ for (bitCounter = 15; bitCounter >= 2; bitCounter--)
-+ e100_send_mdio_bit(GET_BIT(bitCounter, cmd));
-+
-+ /* Turnaround */
-+ for (bitCounter = 1; bitCounter >= 0 ; bitCounter--)
-+ if (write_cmd)
-+ e100_send_mdio_bit(GET_BIT(bitCounter, data));
-+ else
-+ e100_receive_mdio_bit();
-+}
-+
-+static void
-+e100_send_mdio_bit(unsigned char bit)
-+{
-+ *R_NETWORK_MGM_CTRL =
-+ IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable) |
-+ IO_FIELD(R_NETWORK_MGM_CTRL, mdio, bit);
-+ udelay(1);
-+ *R_NETWORK_MGM_CTRL =
-+ IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable) |
-+ IO_MASK(R_NETWORK_MGM_CTRL, mdck) |
-+ IO_FIELD(R_NETWORK_MGM_CTRL, mdio, bit);
-+ udelay(1);
-+}
-+
-+static unsigned char
-+e100_receive_mdio_bit()
-+{
-+ unsigned char bit;
-+ *R_NETWORK_MGM_CTRL = 0;
-+ bit = IO_EXTRACT(R_NETWORK_STAT, mdio, *R_NETWORK_STAT);
-+ udelay(1);
-+ *R_NETWORK_MGM_CTRL = IO_MASK(R_NETWORK_MGM_CTRL, mdck);
-+ udelay(1);
-+ return bit;
-+}
-+
-+static void
-+e100_reset_transceiver(struct net_device* dev)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+ unsigned short cmd;
-+ unsigned short data;
-+ int bitCounter;
-+
-+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+
-+ cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (np->mii_if.phy_id << 7) | (MII_BMCR << 2);
-+
-+ e100_send_mdio_cmd(cmd, 1);
-+
-+ data |= 0x8000;
-+
-+ for (bitCounter = 15; bitCounter >= 0 ; bitCounter--) {
-+ e100_send_mdio_bit(GET_BIT(bitCounter, data));
-+ }
-+}
-+
-+/* Called by upper layers if they decide it took too long to complete
-+ * sending a packet - we need to reset and stuff.
-+ */
-+
-+static void
-+e100_tx_timeout(struct net_device *dev)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&np->lock, flags);
-+
-+ printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
-+ tx_done(dev) ? "IRQ problem" : "network cable problem");
-+
-+ /* remember we got an error */
-+
-+ np->stats.tx_errors++;
-+
-+ /* reset the TX DMA in case it has hung on something */
-+
-+ RESET_DMA(NETWORK_TX_DMA_NBR);
-+ WAIT_DMA(NETWORK_TX_DMA_NBR);
-+
-+ /* Reset the transceiver. */
-+
-+ e100_reset_transceiver(dev);
-+
-+ /* and get rid of the packets that never got an interrupt */
-+ while (myFirstTxDesc != myNextTxDesc) {
-+ dev_kfree_skb(myFirstTxDesc->skb);
-+ myFirstTxDesc->skb = 0;
-+ myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
-+ }
-+
-+ /* Set up transmit DMA channel so it can be restarted later */
-+ *R_DMA_CH0_FIRST = 0;
-+ *R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
-+
-+ /* tell the upper layers we're ok again */
-+
-+ netif_wake_queue(dev);
-+ spin_unlock_irqrestore(&np->lock, flags);
-+}
-+
-+
-+/* This will only be invoked if the driver is _not_ in XOFF state.
-+ * What this means is that we need not check it, and that this
-+ * invariant will hold if we make sure that the netif_*_queue()
-+ * calls are done at the proper times.
-+ */
-+
-+static int
-+e100_send_packet(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+ unsigned char *buf = skb->data;
-+ unsigned long flags;
-+
-+#ifdef ETHDEBUG
-+ printk("send packet len %d\n", length);
-+#endif
-+ spin_lock_irqsave(&np->lock, flags); /* protect from tx_interrupt and ourself */
-+
-+ myNextTxDesc->skb = skb;
-+
-+ dev->trans_start = jiffies;
-+
-+ e100_hardware_send_packet(np, buf, skb->len);
-+
-+ myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next);
-+
-+ /* Stop queue if full */
-+ if (myNextTxDesc == myFirstTxDesc) {
-+ netif_stop_queue(dev);
-+ }
-+
-+ spin_unlock_irqrestore(&np->lock, flags);
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+/*
-+ * The typical workload of the driver:
-+ * Handle the network interface interrupts.
-+ */
-+
-+static irqreturn_t
-+e100rxtx_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *)dev_id;
-+ struct net_local *np = netdev_priv(dev);
-+ unsigned long irqbits;
-+
-+ /*
-+ * Note that both rx and tx interrupts are blocked at this point,
-+ * regardless of which got us here.
-+ */
-+
-+ irqbits = *R_IRQ_MASK2_RD;
-+
-+ /* Handle received packets */
-+ if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) {
-+ /* acknowledge the eop interrupt */
-+
-+ *R_DMA_CH1_CLR_INTR = IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do);
-+
-+ /* check if one or more complete packets were indeed received */
-+
-+ while ((*R_DMA_CH1_FIRST != virt_to_phys(myNextRxDesc)) &&
-+ (myNextRxDesc != myLastRxDesc)) {
-+ /* Take out the buffer and give it to the OS, then
-+ * allocate a new buffer to put a packet in.
-+ */
-+ e100_rx(dev);
-+ np->stats.rx_packets++;
-+ /* restart/continue on the channel, for safety */
-+ *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart);
-+ /* clear dma channel 1 eop/descr irq bits */
-+ *R_DMA_CH1_CLR_INTR =
-+ IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do) |
-+ IO_STATE(R_DMA_CH1_CLR_INTR, clr_descr, do);
-+
-+ /* now, we might have gotten another packet
-+ so we have to loop back and check if so */
-+ }
-+ }
-+
-+ /* Report any packets that have been sent */
-+ while (virt_to_phys(myFirstTxDesc) != *R_DMA_CH0_FIRST &&
-+ (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) {
-+ np->stats.tx_bytes += myFirstTxDesc->skb->len;
-+ np->stats.tx_packets++;
-+
-+ /* dma is ready with the transmission of the data in tx_skb, so now
-+ we can release the skb memory */
-+ dev_kfree_skb_irq(myFirstTxDesc->skb);
-+ myFirstTxDesc->skb = 0;
-+ myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
-+ /* Wake up queue. */
-+ netif_wake_queue(dev);
-+ }
-+
-+ if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) {
-+ /* acknowledge the eop interrupt. */
-+ *R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t
-+e100nw_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *)dev_id;
-+ struct net_local *np = netdev_priv(dev);
-+ unsigned long irqbits = *R_IRQ_MASK0_RD;
-+
-+ /* check for underrun irq */
-+ if (irqbits & IO_STATE(R_IRQ_MASK0_RD, underrun, active)) {
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
-+ *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
-+ np->stats.tx_errors++;
-+ D(printk("ethernet receiver underrun!\n"));
-+ }
-+
-+ /* check for overrun irq */
-+ if (irqbits & IO_STATE(R_IRQ_MASK0_RD, overrun, active)) {
-+ update_rx_stats(&np->stats); /* this will ack the irq */
-+ D(printk("ethernet receiver overrun!\n"));
-+ }
-+ /* check for excessive collision irq */
-+ if (irqbits & IO_STATE(R_IRQ_MASK0_RD, excessive_col, active)) {
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
-+ *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
-+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
-+ np->stats.tx_errors++;
-+ D(printk("ethernet excessive collisions!\n"));
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+/* We have a good packet(s), get it/them out of the buffers. */
-+static void
-+e100_rx(struct net_device *dev)
-+{
-+ struct sk_buff *skb;
-+ int length = 0;
-+ struct net_local *np = netdev_priv(dev);
-+ unsigned char *skb_data_ptr;
-+#ifdef ETHDEBUG
-+ int i;
-+#endif
-+ etrax_eth_descr *prevRxDesc; /* The descriptor right before myNextRxDesc */
-+ spin_lock(&np->led_lock);
-+ if (!led_active && time_after(jiffies, led_next_time)) {
-+ /* light the network leds depending on the current speed. */
-+ e100_set_network_leds(NETWORK_ACTIVITY);
-+
-+ /* Set the earliest time we may clear the LED */
-+ led_next_time = jiffies + NET_FLASH_TIME;
-+ led_active = 1;
-+ mod_timer(&clear_led_timer, jiffies + HZ/10);
-+ }
-+ spin_unlock(&np->led_lock);
-+
-+ length = myNextRxDesc->descr.hw_len - 4;
-+ np->stats.rx_bytes += length;
-+
-+#ifdef ETHDEBUG
-+ printk("Got a packet of length %d:\n", length);
-+ /* dump the first bytes in the packet */
-+ skb_data_ptr = (unsigned char *)phys_to_virt(myNextRxDesc->descr.buf);
-+ for (i = 0; i < 8; i++) {
-+ printk("%d: %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x\n", i * 8,
-+ skb_data_ptr[0],skb_data_ptr[1],skb_data_ptr[2],skb_data_ptr[3],
-+ skb_data_ptr[4],skb_data_ptr[5],skb_data_ptr[6],skb_data_ptr[7]);
-+ skb_data_ptr += 8;
-+ }
-+#endif
-+
-+ if (length < RX_COPYBREAK) {
-+ /* Small packet, copy data */
-+ skb = dev_alloc_skb(length - ETHER_HEAD_LEN);
-+ if (!skb) {
-+ np->stats.rx_errors++;
-+ printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-+ goto update_nextrxdesc;
-+ }
-+
-+ skb_put(skb, length - ETHER_HEAD_LEN); /* allocate room for the packet body */
-+ skb_data_ptr = skb_push(skb, ETHER_HEAD_LEN); /* allocate room for the header */
-+
-+#ifdef ETHDEBUG
-+ printk("head = 0x%x, data = 0x%x, tail = 0x%x, end = 0x%x\n",
-+ skb->head, skb->data, skb_tail_pointer(skb),
-+ skb_end_pointer(skb));
-+ printk("copying packet to 0x%x.\n", skb_data_ptr);
-+#endif
-+
-+ memcpy(skb_data_ptr, phys_to_virt(myNextRxDesc->descr.buf), length);
-+ }
-+ else {
-+ /* Large packet, send directly to upper layers and allocate new
-+ * memory (aligned to cache line boundary to avoid bug).
-+ * Before sending the skb to upper layers we must make sure
-+ * that skb->data points to the aligned start of the packet.
-+ */
-+ int align;
-+ struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
-+ if (!new_skb) {
-+ np->stats.rx_errors++;
-+ printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-+ goto update_nextrxdesc;
-+ }
-+ skb = myNextRxDesc->skb;
-+ align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data;
-+ skb_put(skb, length + align);
-+ skb_pull(skb, align); /* Remove alignment bytes */
-+ myNextRxDesc->skb = new_skb;
-+ myNextRxDesc->descr.buf = L1_CACHE_ALIGN(virt_to_phys(myNextRxDesc->skb->data));
-+ }
-+
-+ skb->protocol = eth_type_trans(skb, dev);
-+
-+ /* Send the packet to the upper layers */
-+ netif_rx(skb);
-+
-+ update_nextrxdesc:
-+ /* Prepare for next packet */
-+ myNextRxDesc->descr.status = 0;
-+ prevRxDesc = myNextRxDesc;
-+ myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next);
-+
-+ rx_queue_len++;
-+
-+ /* Check if descriptors should be returned */
-+ if (rx_queue_len == RX_QUEUE_THRESHOLD) {
-+ flush_etrax_cache();
-+ prevRxDesc->descr.ctrl |= d_eol;
-+ myLastRxDesc->descr.ctrl &= ~d_eol;
-+ myLastRxDesc = prevRxDesc;
-+ rx_queue_len = 0;
-+ }
-+}
-+
-+/* The inverse routine to net_open(). */
-+static int
-+e100_close(struct net_device *dev)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+
-+ printk(KERN_INFO "Closing %s.\n", dev->name);
-+
-+ netif_stop_queue(dev);
-+
-+ *R_IRQ_MASK0_CLR =
-+ IO_STATE(R_IRQ_MASK0_CLR, overrun, clr) |
-+ IO_STATE(R_IRQ_MASK0_CLR, underrun, clr) |
-+ IO_STATE(R_IRQ_MASK0_CLR, excessive_col, clr);
-+
-+ *R_IRQ_MASK2_CLR =
-+ IO_STATE(R_IRQ_MASK2_CLR, dma0_descr, clr) |
-+ IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
-+ IO_STATE(R_IRQ_MASK2_CLR, dma1_descr, clr) |
-+ IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
-+
-+ /* Stop the receiver and the transmitter */
-+
-+ RESET_DMA(NETWORK_TX_DMA_NBR);
-+ RESET_DMA(NETWORK_RX_DMA_NBR);
-+
-+ /* Flush the Tx and disable Rx here. */
-+
-+ free_irq(NETWORK_DMA_RX_IRQ_NBR, (void *)dev);
-+ free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
-+ free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
-+
-+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
-+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
-+
-+ /* Update the statistics here. */
-+
-+ update_rx_stats(&np->stats);
-+ update_tx_stats(&np->stats);
-+
-+ /* Stop speed/duplex timers */
-+ del_timer(&speed_timer);
-+ del_timer(&duplex_timer);
-+
-+ return 0;
-+}
-+
-+static int
-+e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = if_mii(ifr);
-+ struct net_local *np = netdev_priv(dev);
-+ int rc = 0;
-+ int old_autoneg;
-+
-+ spin_lock(&np->lock); /* Preempt protection */
-+ switch (cmd) {
-+ /* The ioctls below should be considered obsolete but are */
-+ /* still present for compatability with old scripts/apps */
-+ case SET_ETH_SPEED_10: /* 10 Mbps */
-+ e100_set_speed(dev, 10);
-+ break;
-+ case SET_ETH_SPEED_100: /* 100 Mbps */
-+ e100_set_speed(dev, 100);
-+ break;
-+ case SET_ETH_SPEED_AUTO: /* Auto-negotiate speed */
-+ e100_set_speed(dev, 0);
-+ break;
-+ case SET_ETH_DUPLEX_HALF: /* Half duplex */
-+ e100_set_duplex(dev, half);
-+ break;
-+ case SET_ETH_DUPLEX_FULL: /* Full duplex */
-+ e100_set_duplex(dev, full);
-+ break;
-+ case SET_ETH_DUPLEX_AUTO: /* Auto-negotiate duplex */
-+ e100_set_duplex(dev, autoneg);
-+ break;
-+ case SET_ETH_AUTONEG:
-+ old_autoneg = autoneg_normal;
-+ autoneg_normal = *(int*)data;
-+ if (autoneg_normal != old_autoneg)
-+ e100_negotiate(dev);
-+ break;
-+ default:
-+ rc = generic_mii_ioctl(&np->mii_if, if_mii(ifr),
-+ cmd, NULL);
-+ break;
-+ }
-+ spin_unlock(&np->lock);
-+ return rc;
-+}
-+
-+static int e100_get_settings(struct net_device *dev,
-+ struct ethtool_cmd *cmd)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+ int err;
-+
-+ spin_lock_irq(&np->lock);
-+ err = mii_ethtool_gset(&np->mii_if, cmd);
-+ spin_unlock_irq(&np->lock);
-+
-+ /* The PHY may support 1000baseT, but the Etrax100 does not. */
-+ cmd->supported &= ~(SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full);
-+ return err;
-+}
-+
-+static int e100_set_settings(struct net_device *dev,
-+ struct ethtool_cmd *ecmd)
-+{
-+ if (ecmd->autoneg == AUTONEG_ENABLE) {
-+ e100_set_duplex(dev, autoneg);
-+ e100_set_speed(dev, 0);
-+ } else {
-+ e100_set_duplex(dev, ecmd->duplex == DUPLEX_HALF ? half : full);
-+ e100_set_speed(dev, ecmd->speed == SPEED_10 ? 10: 100);
-+ }
-+
-+ return 0;
-+}
-+
-+static void e100_get_drvinfo(struct net_device *dev,
-+ struct ethtool_drvinfo *info)
-+{
-+ strncpy(info->driver, "ETRAX 100LX", sizeof(info->driver) - 1);
-+ strncpy(info->version, "$Revision: 1.31 $", sizeof(info->version) - 1);
-+ strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1);
-+ strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1);
-+}
-+
-+static int e100_nway_reset(struct net_device *dev)
-+{
-+ if (current_duplex == autoneg && current_speed_selection == 0)
-+ e100_negotiate(dev);
-+ return 0;
-+}
-+
-+static const struct ethtool_ops e100_ethtool_ops = {
-+ .get_settings = e100_get_settings,
-+ .set_settings = e100_set_settings,
-+ .get_drvinfo = e100_get_drvinfo,
-+ .nway_reset = e100_nway_reset,
-+ .get_link = ethtool_op_get_link,
-+};
-+
-+static int
-+e100_set_config(struct net_device *dev, struct ifmap *map)
-+{
-+ struct net_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->lock); /* Preempt protection */
-+
-+ switch(map->port) {
-+ case IF_PORT_UNKNOWN:
-+ /* Use autoneg */
-+ e100_set_speed(dev, 0);
-+ e100_set_duplex(dev, autoneg);
-+ break;
-+ case IF_PORT_10BASET:
-+ e100_set_speed(dev, 10);
-+ e100_set_duplex(dev, autoneg);
-+ break;
-+ case IF_PORT_100BASET:
-+ case IF_PORT_100BASETX:
-+ e100_set_speed(dev, 100);
-+ e100_set_duplex(dev, autoneg);
-+ break;
-+ case IF_PORT_100BASEFX:
-+ case IF_PORT_10BASE2:
-+ case IF_PORT_AUI:
-+ spin_unlock(&np->lock);
-+ return -EOPNOTSUPP;
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: Invalid media selected", dev->name);
-+ spin_unlock(&np->lock);
-+ return -EINVAL;
-+ }
-+ spin_unlock(&np->lock);
-+ return 0;
-+}
-+
-+static void
-+update_rx_stats(struct net_device_stats *es)
-+{
-+ unsigned long r = *R_REC_COUNTERS;
-+ /* update stats relevant to reception errors */
-+ es->rx_fifo_errors += IO_EXTRACT(R_REC_COUNTERS, congestion, r);
-+ es->rx_crc_errors += IO_EXTRACT(R_REC_COUNTERS, crc_error, r);
-+ es->rx_frame_errors += IO_EXTRACT(R_REC_COUNTERS, alignment_error, r);
-+ es->rx_length_errors += IO_EXTRACT(R_REC_COUNTERS, oversize, r);
-+}
-+
-+static void
-+update_tx_stats(struct net_device_stats *es)
-+{
-+ unsigned long r = *R_TR_COUNTERS;
-+ /* update stats relevant to transmission errors */
-+ es->collisions +=
-+ IO_EXTRACT(R_TR_COUNTERS, single_col, r) +
-+ IO_EXTRACT(R_TR_COUNTERS, multiple_col, r);
-+}
-+
-+/*
-+ * Get the current statistics.
-+ * This may be called with the card open or closed.
-+ */
-+static struct net_device_stats *
-+e100_get_stats(struct net_device *dev)
-+{
-+ struct net_local *lp = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&lp->lock, flags);
-+
-+ update_rx_stats(&lp->stats);
-+ update_tx_stats(&lp->stats);
-+
-+ spin_unlock_irqrestore(&lp->lock, flags);
-+ return &lp->stats;
-+}
-+
-+/*
-+ * Set or clear the multicast filter for this adaptor.
-+ * num_addrs == -1 Promiscuous mode, receive all packets
-+ * num_addrs == 0 Normal mode, clear multicast list
-+ * num_addrs > 0 Multicast mode, receive normal and MC packets,
-+ * and do best-effort filtering.
-+ */
-+static void
-+set_multicast_list(struct net_device *dev)
-+{
-+ struct net_local *lp = netdev_priv(dev);
-+ int num_addr = dev->mc_count;
-+ unsigned long int lo_bits;
-+ unsigned long int hi_bits;
-+
-+ spin_lock(&lp->lock);
-+ if (dev->flags & IFF_PROMISC) {
-+ /* promiscuous mode */
-+ lo_bits = 0xfffffffful;
-+ hi_bits = 0xfffffffful;
-+
-+ /* Enable individual receive */
-+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, receive);
-+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+ } else if (dev->flags & IFF_ALLMULTI) {
-+ /* enable all multicasts */
-+ lo_bits = 0xfffffffful;
-+ hi_bits = 0xfffffffful;
-+
-+ /* Disable individual receive */
-+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
-+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+ } else if (num_addr == 0) {
-+ /* Normal, clear the mc list */
-+ lo_bits = 0x00000000ul;
-+ hi_bits = 0x00000000ul;
-+
-+ /* Disable individual receive */
-+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
-+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+ } else {
-+ /* MC mode, receive normal and MC packets */
-+ char hash_ix;
-+ struct dev_mc_list *dmi = dev->mc_list;
-+ int i;
-+ char *baddr;
-+
-+ lo_bits = 0x00000000ul;
-+ hi_bits = 0x00000000ul;
-+ for (i = 0; i < num_addr; i++) {
-+ /* Calculate the hash index for the GA registers */
-+
-+ hash_ix = 0;
-+ baddr = dmi->dmi_addr;
-+ hash_ix ^= (*baddr) & 0x3f;
-+ hash_ix ^= ((*baddr) >> 6) & 0x03;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 2) & 0x03c;
-+ hash_ix ^= ((*baddr) >> 4) & 0xf;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 4) & 0x30;
-+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+ ++baddr;
-+ hash_ix ^= (*baddr) & 0x3f;
-+ hash_ix ^= ((*baddr) >> 6) & 0x03;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 2) & 0x03c;
-+ hash_ix ^= ((*baddr) >> 4) & 0xf;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 4) & 0x30;
-+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+
-+ hash_ix &= 0x3f;
-+
-+ if (hash_ix >= 32) {
-+ hi_bits |= (1 << (hash_ix-32));
-+ } else {
-+ lo_bits |= (1 << hash_ix);
-+ }
-+ dmi = dmi->next;
-+ }
-+ /* Disable individual receive */
-+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
-+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
-+ }
-+ *R_NETWORK_GA_0 = lo_bits;
-+ *R_NETWORK_GA_1 = hi_bits;
-+ spin_unlock(&lp->lock);
-+}
-+
-+void
-+e100_hardware_send_packet(struct net_local *np, char *buf, int length)
-+{
-+ D(printk("e100 send pack, buf 0x%x len %d\n", buf, length));
-+
-+ spin_lock(&np->led_lock);
-+ if (!led_active && time_after(jiffies, led_next_time)) {
-+ /* light the network leds depending on the current speed. */
-+ e100_set_network_leds(NETWORK_ACTIVITY);
-+
-+ /* Set the earliest time we may clear the LED */
-+ led_next_time = jiffies + NET_FLASH_TIME;
-+ led_active = 1;
-+ mod_timer(&clear_led_timer, jiffies + HZ/10);
-+ }
-+ spin_unlock(&np->led_lock);
-+
-+ /* configure the tx dma descriptor */
-+ myNextTxDesc->descr.sw_len = length;
-+ myNextTxDesc->descr.ctrl = d_eop | d_eol | d_wait;
-+ myNextTxDesc->descr.buf = virt_to_phys(buf);
-+
-+ /* Move end of list */
-+ myLastTxDesc->descr.ctrl &= ~d_eol;
-+ myLastTxDesc = myNextTxDesc;
-+
-+ /* Restart DMA channel */
-+ *R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, restart);
-+}
-+
-+static void
-+e100_clear_network_leds(unsigned long dummy)
-+{
-+ struct net_device *dev = (struct net_device *)dummy;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->led_lock);
-+
-+ if (led_active && time_after(jiffies, led_next_time)) {
-+ e100_set_network_leds(NO_NETWORK_ACTIVITY);
-+
-+ /* Set the earliest time we may set the LED */
-+ led_next_time = jiffies + NET_FLASH_PAUSE;
-+ led_active = 0;
-+ }
-+
-+ spin_unlock(&np->led_lock);
-+}
-+
-+static void
-+e100_set_network_leds(int active)
-+{
-+#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK)
-+ int light_leds = (active == NO_NETWORK_ACTIVITY);
-+#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY)
-+ int light_leds = (active == NETWORK_ACTIVITY);
-+#else
-+#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY"
-+#endif
-+
-+ if (!current_speed) {
-+ /* Make LED red, link is down */
-+#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION)
-+ CRIS_LED_NETWORK_SET(CRIS_LED_RED);
-+#else
-+ CRIS_LED_NETWORK_SET(CRIS_LED_OFF);
-+#endif
-+ } else if (light_leds) {
-+ if (current_speed == 10) {
-+ CRIS_LED_NETWORK_SET(CRIS_LED_ORANGE);
-+ } else {
-+ CRIS_LED_NETWORK_SET(CRIS_LED_GREEN);
-+ }
-+ } else {
-+ CRIS_LED_NETWORK_SET(CRIS_LED_OFF);
-+ }
-+}
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void
-+e100_netpoll(struct net_device* netdev)
-+{
-+ e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL);
-+}
-+#endif
-+
-+static int
-+etrax_init_module(void)
-+{
-+ return etrax_ethernet_init();
-+}
-+
-+static int __init
-+e100_boot_setup(char* str)
-+{
-+ struct sockaddr sa = {0};
-+ int i;
-+
-+ /* Parse the colon separated Ethernet station address */
-+ for (i = 0; i < ETH_ALEN; i++) {
-+ unsigned int tmp;
-+ if (sscanf(str + 3*i, "%2x", &tmp) != 1) {
-+ printk(KERN_WARNING "Malformed station address");
-+ return 0;
-+ }
-+ sa.sa_data[i] = (char)tmp;
-+ }
-+
-+ default_mac = sa;
-+ return 1;
-+}
-+
-+__setup("etrax100_eth=", e100_boot_setup);
-+
-+module_init(etrax_init_module);
-diff -Nur linux-2.6.32.orig/drivers/serial/crisv10.c linux-2.6.32/drivers/serial/crisv10.c
---- linux-2.6.32.orig/drivers/serial/crisv10.c 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/drivers/serial/crisv10.c 2010-01-10 13:41:59.276309474 +0100
+diff -Nur linux-2.6.34.orig/drivers/serial/crisv10.c linux-2.6.34/drivers/serial/crisv10.c
+--- linux-2.6.34.orig/drivers/serial/crisv10.c 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/serial/crisv10.c 2010-05-25 19:41:51.550975576 +0200
@@ -13,6 +13,7 @@
#include <linux/errno.h>
#include <linux/signal.h>
@@ -2205,4569 +441,9 @@ diff -Nur linux-2.6.32.orig/drivers/serial/crisv10.c linux-2.6.32/drivers/serial
return 0;
}
-diff -Nur linux-2.6.32.orig/drivers/serial/crisv10.c.orig linux-2.6.32/drivers/serial/crisv10.c.orig
---- linux-2.6.32.orig/drivers/serial/crisv10.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/serial/crisv10.c.orig 2009-12-03 04:51:21.000000000 +0100
-@@ -0,0 +1,4556 @@
-+/*
-+ * Serial port driver for the ETRAX 100LX chip
-+ *
-+ * Copyright (C) 1998-2007 Axis Communications AB
-+ *
-+ * Many, many authors. Based once upon a time on serial.c for 16x50.
-+ *
-+ */
-+
-+static char *serial_version = "$Revision: 1.25 $";
-+
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/major.h>
-+#include <linux/smp_lock.h>
-+#include <linux/string.h>
-+#include <linux/fcntl.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/mutex.h>
-+#include <linux/bitops.h>
-+#include <linux/seq_file.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-+
-+#include <asm/irq.h>
-+#include <asm/dma.h>
-+#include <asm/system.h>
-+
-+#include <arch/svinto.h>
-+
-+/* non-arch dependent serial structures are in linux/serial.h */
-+#include <linux/serial.h>
-+/* while we keep our own stuff (struct e100_serial) in a local .h file */
-+#include "crisv10.h"
-+#include <asm/fasttimer.h>
-+#include <arch/io_interface_mux.h>
-+
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+#ifndef CONFIG_ETRAX_FAST_TIMER
-+#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER"
-+#endif
-+#endif
-+
-+#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \
-+ (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0)
-+#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1"
-+#endif
-+
-+#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G"
-+#endif
-+
-+/*
-+ * All of the compatibilty code so we can compile serial.c against
-+ * older kernels is hidden in serial_compat.h
-+ */
-+#if defined(LOCAL_HEADERS)
-+#include "serial_compat.h"
-+#endif
-+
-+struct tty_driver *serial_driver;
-+
-+/* number of characters left in xmit buffer before we ask for more */
-+#define WAKEUP_CHARS 256
-+
-+//#define SERIAL_DEBUG_INTR
-+//#define SERIAL_DEBUG_OPEN
-+//#define SERIAL_DEBUG_FLOW
-+//#define SERIAL_DEBUG_DATA
-+//#define SERIAL_DEBUG_THROTTLE
-+//#define SERIAL_DEBUG_IO /* Debug for Extra control and status pins */
-+//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */
-+
-+/* Enable this to use serial interrupts to handle when you
-+ expect the first received event on the serial port to
-+ be an error, break or similar. Used to be able to flash IRMA
-+ from eLinux */
-+#define SERIAL_HANDLE_EARLY_ERRORS
-+
-+/* Currently 16 descriptors x 128 bytes = 2048 bytes */
-+#define SERIAL_DESCR_BUF_SIZE 256
-+
-+#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */
-+#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE
-+
-+/* We don't want to load the system with massive fast timer interrupt
-+ * on high baudrates so limit it to 250 us (4kHz) */
-+#define MIN_FLUSH_TIME_USEC 250
-+
-+/* Add an x here to log a lot of timer stuff */
-+#define TIMERD(x)
-+/* Debug details of interrupt handling */
-+#define DINTR1(x) /* irq on/off, errors */
-+#define DINTR2(x) /* tx and rx */
-+/* Debug flip buffer stuff */
-+#define DFLIP(x)
-+/* Debug flow control and overview of data flow */
-+#define DFLOW(x)
-+#define DBAUD(x)
-+#define DLOG_INT_TRIG(x)
-+
-+//#define DEBUG_LOG_INCLUDED
-+#ifndef DEBUG_LOG_INCLUDED
-+#define DEBUG_LOG(line, string, value)
-+#else
-+struct debug_log_info
-+{
-+ unsigned long time;
-+ unsigned long timer_data;
-+// int line;
-+ const char *string;
-+ int value;
-+};
-+#define DEBUG_LOG_SIZE 4096
-+
-+struct debug_log_info debug_log[DEBUG_LOG_SIZE];
-+int debug_log_pos = 0;
-+
-+#define DEBUG_LOG(_line, _string, _value) do { \
-+ if ((_line) == SERIAL_DEBUG_LINE) {\
-+ debug_log_func(_line, _string, _value); \
-+ }\
-+}while(0)
-+
-+void debug_log_func(int line, const char *string, int value)
-+{
-+ if (debug_log_pos < DEBUG_LOG_SIZE) {
-+ debug_log[debug_log_pos].time = jiffies;
-+ debug_log[debug_log_pos].timer_data = *R_TIMER_DATA;
-+// debug_log[debug_log_pos].line = line;
-+ debug_log[debug_log_pos].string = string;
-+ debug_log[debug_log_pos].value = value;
-+ debug_log_pos++;
-+ }
-+ /*printk(string, value);*/
-+}
-+#endif
-+
-+#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS
-+/* Default number of timer ticks before flushing rx fifo
-+ * When using "little data, low latency applications: use 0
-+ * When using "much data applications (PPP)" use ~5
-+ */
-+#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5
-+#endif
-+
-+unsigned long timer_data_to_ns(unsigned long timer_data);
-+
-+static void change_speed(struct e100_serial *info);
-+static void rs_throttle(struct tty_struct * tty);
-+static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-+static int rs_write(struct tty_struct *tty,
-+ const unsigned char *buf, int count);
-+#ifdef CONFIG_ETRAX_RS485
-+static int e100_write_rs485(struct tty_struct *tty,
-+ const unsigned char *buf, int count);
-+#endif
-+static int get_lsr_info(struct e100_serial *info, unsigned int *value);
-+
-+
-+#define DEF_BAUD 115200 /* 115.2 kbit/s */
-+#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-+#define DEF_RX 0x20 /* or SERIAL_CTRL_W >> 8 */
-+/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */
-+#define DEF_TX 0x80 /* or SERIAL_CTRL_B */
-+
-+/* offsets from R_SERIALx_CTRL */
-+
-+#define REG_DATA 0
-+#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */
-+#define REG_TR_DATA 0
-+#define REG_STATUS 1
-+#define REG_TR_CTRL 1
-+#define REG_REC_CTRL 2
-+#define REG_BAUD 3
-+#define REG_XOFF 4 /* this is a 32 bit register */
-+
-+/* The bitfields are the same for all serial ports */
-+#define SER_RXD_MASK IO_MASK(R_SERIAL0_STATUS, rxd)
-+#define SER_DATA_AVAIL_MASK IO_MASK(R_SERIAL0_STATUS, data_avail)
-+#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err)
-+#define SER_PAR_ERR_MASK IO_MASK(R_SERIAL0_STATUS, par_err)
-+#define SER_OVERRUN_MASK IO_MASK(R_SERIAL0_STATUS, overrun)
-+
-+#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK)
-+
-+/* Values for info->errorcode */
-+#define ERRCODE_SET_BREAK (TTY_BREAK)
-+#define ERRCODE_INSERT 0x100
-+#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK)
-+
-+#define FORCE_EOP(info) *R_SET_EOP = 1U << info->iseteop;
-+
-+/*
-+ * General note regarding the use of IO_* macros in this file:
-+ *
-+ * We will use the bits defined for DMA channel 6 when using various
-+ * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are
-+ * the same for all channels (which of course they are).
-+ *
-+ * We will also use the bits defined for serial port 0 when writing commands
-+ * to the different ports, as these bits too are the same for all ports.
-+ */
-+
-+
-+/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */
-+static const unsigned long e100_ser_int_mask = 0
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready)
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready)
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready)
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready)
-+#endif
-+;
-+unsigned long r_alt_ser_baudrate_shadow = 0;
-+
-+/* this is the data for the four serial ports in the etrax100 */
-+/* DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */
-+/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */
-+
-+static struct e100_serial rs_table[] = {
-+ { .baud = DEF_BAUD,
-+ .ioport = (unsigned char *)R_SERIAL0_CTRL,
-+ .irq = 1U << 12, /* uses DMA 6 and 7 */
-+ .oclrintradr = R_DMA_CH6_CLR_INTR,
-+ .ofirstadr = R_DMA_CH6_FIRST,
-+ .ocmdadr = R_DMA_CH6_CMD,
-+ .ostatusadr = R_DMA_CH6_STATUS,
-+ .iclrintradr = R_DMA_CH7_CLR_INTR,
-+ .ifirstadr = R_DMA_CH7_FIRST,
-+ .icmdadr = R_DMA_CH7_CMD,
-+ .idescradr = R_DMA_CH7_DESCR,
-+ .flags = STD_FLAGS,
-+ .rx_ctrl = DEF_RX,
-+ .tx_ctrl = DEF_TX,
-+ .iseteop = 2,
-+ .dma_owner = dma_ser0,
-+ .io_if = if_serial_0,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+ .enabled = 1,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-+ .dma_out_enabled = 1,
-+ .dma_out_nbr = SER0_TX_DMA_NBR,
-+ .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR,
-+ .dma_out_irq_flags = IRQF_DISABLED,
-+ .dma_out_irq_description = "serial 0 dma tr",
-+#else
-+ .dma_out_enabled = 0,
-+ .dma_out_nbr = UINT_MAX,
-+ .dma_out_irq_nbr = 0,
-+ .dma_out_irq_flags = 0,
-+ .dma_out_irq_description = NULL,
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
-+ .dma_in_enabled = 1,
-+ .dma_in_nbr = SER0_RX_DMA_NBR,
-+ .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR,
-+ .dma_in_irq_flags = IRQF_DISABLED,
-+ .dma_in_irq_description = "serial 0 dma rec",
-+#else
-+ .dma_in_enabled = 0,
-+ .dma_in_nbr = UINT_MAX,
-+ .dma_in_irq_nbr = 0,
-+ .dma_in_irq_flags = 0,
-+ .dma_in_irq_description = NULL,
-+#endif
-+#else
-+ .enabled = 0,
-+ .io_if_description = NULL,
-+ .dma_out_enabled = 0,
-+ .dma_in_enabled = 0
-+#endif
-+
-+}, /* ttyS0 */
-+#ifndef CONFIG_SVINTO_SIM
-+ { .baud = DEF_BAUD,
-+ .ioport = (unsigned char *)R_SERIAL1_CTRL,
-+ .irq = 1U << 16, /* uses DMA 8 and 9 */
-+ .oclrintradr = R_DMA_CH8_CLR_INTR,
-+ .ofirstadr = R_DMA_CH8_FIRST,
-+ .ocmdadr = R_DMA_CH8_CMD,
-+ .ostatusadr = R_DMA_CH8_STATUS,
-+ .iclrintradr = R_DMA_CH9_CLR_INTR,
-+ .ifirstadr = R_DMA_CH9_FIRST,
-+ .icmdadr = R_DMA_CH9_CMD,
-+ .idescradr = R_DMA_CH9_DESCR,
-+ .flags = STD_FLAGS,
-+ .rx_ctrl = DEF_RX,
-+ .tx_ctrl = DEF_TX,
-+ .iseteop = 3,
-+ .dma_owner = dma_ser1,
-+ .io_if = if_serial_1,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+ .enabled = 1,
-+ .io_if_description = "ser1",
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
-+ .dma_out_enabled = 1,
-+ .dma_out_nbr = SER1_TX_DMA_NBR,
-+ .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR,
-+ .dma_out_irq_flags = IRQF_DISABLED,
-+ .dma_out_irq_description = "serial 1 dma tr",
-+#else
-+ .dma_out_enabled = 0,
-+ .dma_out_nbr = UINT_MAX,
-+ .dma_out_irq_nbr = 0,
-+ .dma_out_irq_flags = 0,
-+ .dma_out_irq_description = NULL,
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
-+ .dma_in_enabled = 1,
-+ .dma_in_nbr = SER1_RX_DMA_NBR,
-+ .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR,
-+ .dma_in_irq_flags = IRQF_DISABLED,
-+ .dma_in_irq_description = "serial 1 dma rec",
-+#else
-+ .dma_in_enabled = 0,
-+ .dma_in_enabled = 0,
-+ .dma_in_nbr = UINT_MAX,
-+ .dma_in_irq_nbr = 0,
-+ .dma_in_irq_flags = 0,
-+ .dma_in_irq_description = NULL,
-+#endif
-+#else
-+ .enabled = 0,
-+ .io_if_description = NULL,
-+ .dma_in_irq_nbr = 0,
-+ .dma_out_enabled = 0,
-+ .dma_in_enabled = 0
-+#endif
-+}, /* ttyS1 */
-+
-+ { .baud = DEF_BAUD,
-+ .ioport = (unsigned char *)R_SERIAL2_CTRL,
-+ .irq = 1U << 4, /* uses DMA 2 and 3 */
-+ .oclrintradr = R_DMA_CH2_CLR_INTR,
-+ .ofirstadr = R_DMA_CH2_FIRST,
-+ .ocmdadr = R_DMA_CH2_CMD,
-+ .ostatusadr = R_DMA_CH2_STATUS,
-+ .iclrintradr = R_DMA_CH3_CLR_INTR,
-+ .ifirstadr = R_DMA_CH3_FIRST,
-+ .icmdadr = R_DMA_CH3_CMD,
-+ .idescradr = R_DMA_CH3_DESCR,
-+ .flags = STD_FLAGS,
-+ .rx_ctrl = DEF_RX,
-+ .tx_ctrl = DEF_TX,
-+ .iseteop = 0,
-+ .dma_owner = dma_ser2,
-+ .io_if = if_serial_2,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+ .enabled = 1,
-+ .io_if_description = "ser2",
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-+ .dma_out_enabled = 1,
-+ .dma_out_nbr = SER2_TX_DMA_NBR,
-+ .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR,
-+ .dma_out_irq_flags = IRQF_DISABLED,
-+ .dma_out_irq_description = "serial 2 dma tr",
-+#else
-+ .dma_out_enabled = 0,
-+ .dma_out_nbr = UINT_MAX,
-+ .dma_out_irq_nbr = 0,
-+ .dma_out_irq_flags = 0,
-+ .dma_out_irq_description = NULL,
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
-+ .dma_in_enabled = 1,
-+ .dma_in_nbr = SER2_RX_DMA_NBR,
-+ .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR,
-+ .dma_in_irq_flags = IRQF_DISABLED,
-+ .dma_in_irq_description = "serial 2 dma rec",
-+#else
-+ .dma_in_enabled = 0,
-+ .dma_in_nbr = UINT_MAX,
-+ .dma_in_irq_nbr = 0,
-+ .dma_in_irq_flags = 0,
-+ .dma_in_irq_description = NULL,
-+#endif
-+#else
-+ .enabled = 0,
-+ .io_if_description = NULL,
-+ .dma_out_enabled = 0,
-+ .dma_in_enabled = 0
-+#endif
-+ }, /* ttyS2 */
-+
-+ { .baud = DEF_BAUD,
-+ .ioport = (unsigned char *)R_SERIAL3_CTRL,
-+ .irq = 1U << 8, /* uses DMA 4 and 5 */
-+ .oclrintradr = R_DMA_CH4_CLR_INTR,
-+ .ofirstadr = R_DMA_CH4_FIRST,
-+ .ocmdadr = R_DMA_CH4_CMD,
-+ .ostatusadr = R_DMA_CH4_STATUS,
-+ .iclrintradr = R_DMA_CH5_CLR_INTR,
-+ .ifirstadr = R_DMA_CH5_FIRST,
-+ .icmdadr = R_DMA_CH5_CMD,
-+ .idescradr = R_DMA_CH5_DESCR,
-+ .flags = STD_FLAGS,
-+ .rx_ctrl = DEF_RX,
-+ .tx_ctrl = DEF_TX,
-+ .iseteop = 1,
-+ .dma_owner = dma_ser3,
-+ .io_if = if_serial_3,
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+ .enabled = 1,
-+ .io_if_description = "ser3",
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
-+ .dma_out_enabled = 1,
-+ .dma_out_nbr = SER3_TX_DMA_NBR,
-+ .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR,
-+ .dma_out_irq_flags = IRQF_DISABLED,
-+ .dma_out_irq_description = "serial 3 dma tr",
-+#else
-+ .dma_out_enabled = 0,
-+ .dma_out_nbr = UINT_MAX,
-+ .dma_out_irq_nbr = 0,
-+ .dma_out_irq_flags = 0,
-+ .dma_out_irq_description = NULL,
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
-+ .dma_in_enabled = 1,
-+ .dma_in_nbr = SER3_RX_DMA_NBR,
-+ .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR,
-+ .dma_in_irq_flags = IRQF_DISABLED,
-+ .dma_in_irq_description = "serial 3 dma rec",
-+#else
-+ .dma_in_enabled = 0,
-+ .dma_in_nbr = UINT_MAX,
-+ .dma_in_irq_nbr = 0,
-+ .dma_in_irq_flags = 0,
-+ .dma_in_irq_description = NULL
-+#endif
-+#else
-+ .enabled = 0,
-+ .io_if_description = NULL,
-+ .dma_out_enabled = 0,
-+ .dma_in_enabled = 0
-+#endif
-+ } /* ttyS3 */
-+#endif
-+};
-+
-+
-+#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-+
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+static struct fast_timer fast_timers[NR_PORTS];
-+#endif
-+
-+#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY
-+#define PROCSTAT(x) x
-+struct ser_statistics_type {
-+ int overrun_cnt;
-+ int early_errors_cnt;
-+ int ser_ints_ok_cnt;
-+ int errors_cnt;
-+ unsigned long int processing_flip;
-+ unsigned long processing_flip_still_room;
-+ unsigned long int timeout_flush_cnt;
-+ int rx_dma_ints;
-+ int tx_dma_ints;
-+ int rx_tot;
-+ int tx_tot;
-+};
-+
-+static struct ser_statistics_type ser_stat[NR_PORTS];
-+
-+#else
-+
-+#define PROCSTAT(x)
-+
-+#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */
-+
-+/* RS-485 */
-+#if defined(CONFIG_ETRAX_RS485)
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+static struct fast_timer fast_timers_rs485[NR_PORTS];
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PA)
-+static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT;
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT;
-+#endif
-+#endif
-+
-+/* Info and macros needed for each ports extra control/status signals. */
-+#define E100_STRUCT_PORT(line, pinname) \
-+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
-+ (R_PORT_PA_DATA): ( \
-+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
-+ (R_PORT_PB_DATA):&dummy_ser[line]))
-+
-+#define E100_STRUCT_SHADOW(line, pinname) \
-+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
-+ (&port_pa_data_shadow): ( \
-+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
-+ (&port_pb_data_shadow):&dummy_ser[line]))
-+#define E100_STRUCT_MASK(line, pinname) \
-+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
-+ (1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT): ( \
-+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
-+ (1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT):DUMMY_##pinname##_MASK))
-+
-+#define DUMMY_DTR_MASK 1
-+#define DUMMY_RI_MASK 2
-+#define DUMMY_DSR_MASK 4
-+#define DUMMY_CD_MASK 8
-+static unsigned char dummy_ser[NR_PORTS] = {0xFF, 0xFF, 0xFF,0xFF};
-+
-+/* If not all status pins are used or disabled, use mixed mode */
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+
-+#define SER0_PA_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PA_BIT+CONFIG_ETRAX_SER0_RI_ON_PA_BIT+CONFIG_ETRAX_SER0_DSR_ON_PA_BIT+CONFIG_ETRAX_SER0_CD_ON_PA_BIT)
-+
-+#if SER0_PA_BITSUM != -4
-+# if CONFIG_ETRAX_SER0_DTR_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER0_RI_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER0_DSR_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER0_CD_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+#endif
-+
-+#define SER0_PB_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PB_BIT+CONFIG_ETRAX_SER0_RI_ON_PB_BIT+CONFIG_ETRAX_SER0_DSR_ON_PB_BIT+CONFIG_ETRAX_SER0_CD_ON_PB_BIT)
-+
-+#if SER0_PB_BITSUM != -4
-+# if CONFIG_ETRAX_SER0_DTR_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER0_RI_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER0_DSR_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER0_CD_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+#endif
-+
-+#endif /* PORT0 */
-+
-+
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+
-+#define SER1_PA_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PA_BIT+CONFIG_ETRAX_SER1_RI_ON_PA_BIT+CONFIG_ETRAX_SER1_DSR_ON_PA_BIT+CONFIG_ETRAX_SER1_CD_ON_PA_BIT)
-+
-+#if SER1_PA_BITSUM != -4
-+# if CONFIG_ETRAX_SER1_DTR_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER1_RI_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER1_DSR_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER1_CD_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+#endif
-+
-+#define SER1_PB_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PB_BIT+CONFIG_ETRAX_SER1_RI_ON_PB_BIT+CONFIG_ETRAX_SER1_DSR_ON_PB_BIT+CONFIG_ETRAX_SER1_CD_ON_PB_BIT)
-+
-+#if SER1_PB_BITSUM != -4
-+# if CONFIG_ETRAX_SER1_DTR_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER1_RI_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER1_DSR_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER1_CD_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+#endif
-+
-+#endif /* PORT1 */
-+
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+
-+#define SER2_PA_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PA_BIT+CONFIG_ETRAX_SER2_RI_ON_PA_BIT+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT+CONFIG_ETRAX_SER2_CD_ON_PA_BIT)
-+
-+#if SER2_PA_BITSUM != -4
-+# if CONFIG_ETRAX_SER2_DTR_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER2_RI_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER2_DSR_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER2_CD_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+#endif
-+
-+#define SER2_PB_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PB_BIT+CONFIG_ETRAX_SER2_RI_ON_PB_BIT+CONFIG_ETRAX_SER2_DSR_ON_PB_BIT+CONFIG_ETRAX_SER2_CD_ON_PB_BIT)
-+
-+#if SER2_PB_BITSUM != -4
-+# if CONFIG_ETRAX_SER2_DTR_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER2_RI_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER2_DSR_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER2_CD_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+#endif
-+
-+#endif /* PORT2 */
-+
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+
-+#define SER3_PA_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PA_BIT+CONFIG_ETRAX_SER3_RI_ON_PA_BIT+CONFIG_ETRAX_SER3_DSR_ON_PA_BIT+CONFIG_ETRAX_SER3_CD_ON_PA_BIT)
-+
-+#if SER3_PA_BITSUM != -4
-+# if CONFIG_ETRAX_SER3_DTR_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER3_RI_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER3_DSR_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER3_CD_ON_PA_BIT == -1
-+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+#endif
-+
-+#define SER3_PB_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PB_BIT+CONFIG_ETRAX_SER3_RI_ON_PB_BIT+CONFIG_ETRAX_SER3_DSR_ON_PB_BIT+CONFIG_ETRAX_SER3_CD_ON_PB_BIT)
-+
-+#if SER3_PB_BITSUM != -4
-+# if CONFIG_ETRAX_SER3_DTR_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER3_RI_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER3_DSR_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+# if CONFIG_ETRAX_SER3_CD_ON_PB_BIT == -1
-+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
-+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
-+# endif
-+# endif
-+#endif
-+
-+#endif /* PORT3 */
-+
-+
-+#if defined(CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED) || \
-+ defined(CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED) || \
-+ defined(CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED) || \
-+ defined(CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED)
-+#define CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
-+#endif
-+
-+#ifdef CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
-+/* The pins can be mixed on PA and PB */
-+#define CONTROL_PINS_PORT_NOT_USED(line) \
-+ &dummy_ser[line], &dummy_ser[line], \
-+ &dummy_ser[line], &dummy_ser[line], \
-+ &dummy_ser[line], &dummy_ser[line], \
-+ &dummy_ser[line], &dummy_ser[line], \
-+ DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK
-+
-+
-+struct control_pins
-+{
-+ volatile unsigned char *dtr_port;
-+ unsigned char *dtr_shadow;
-+ volatile unsigned char *ri_port;
-+ unsigned char *ri_shadow;
-+ volatile unsigned char *dsr_port;
-+ unsigned char *dsr_shadow;
-+ volatile unsigned char *cd_port;
-+ unsigned char *cd_shadow;
-+
-+ unsigned char dtr_mask;
-+ unsigned char ri_mask;
-+ unsigned char dsr_mask;
-+ unsigned char cd_mask;
-+};
-+
-+static const struct control_pins e100_modem_pins[NR_PORTS] =
-+{
-+ /* Ser 0 */
-+ {
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+ E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR),
-+ E100_STRUCT_PORT(0,RI), E100_STRUCT_SHADOW(0,RI),
-+ E100_STRUCT_PORT(0,DSR), E100_STRUCT_SHADOW(0,DSR),
-+ E100_STRUCT_PORT(0,CD), E100_STRUCT_SHADOW(0,CD),
-+ E100_STRUCT_MASK(0,DTR),
-+ E100_STRUCT_MASK(0,RI),
-+ E100_STRUCT_MASK(0,DSR),
-+ E100_STRUCT_MASK(0,CD)
-+#else
-+ CONTROL_PINS_PORT_NOT_USED(0)
-+#endif
-+ },
-+
-+ /* Ser 1 */
-+ {
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+ E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR),
-+ E100_STRUCT_PORT(1,RI), E100_STRUCT_SHADOW(1,RI),
-+ E100_STRUCT_PORT(1,DSR), E100_STRUCT_SHADOW(1,DSR),
-+ E100_STRUCT_PORT(1,CD), E100_STRUCT_SHADOW(1,CD),
-+ E100_STRUCT_MASK(1,DTR),
-+ E100_STRUCT_MASK(1,RI),
-+ E100_STRUCT_MASK(1,DSR),
-+ E100_STRUCT_MASK(1,CD)
-+#else
-+ CONTROL_PINS_PORT_NOT_USED(1)
-+#endif
-+ },
-+
-+ /* Ser 2 */
-+ {
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+ E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR),
-+ E100_STRUCT_PORT(2,RI), E100_STRUCT_SHADOW(2,RI),
-+ E100_STRUCT_PORT(2,DSR), E100_STRUCT_SHADOW(2,DSR),
-+ E100_STRUCT_PORT(2,CD), E100_STRUCT_SHADOW(2,CD),
-+ E100_STRUCT_MASK(2,DTR),
-+ E100_STRUCT_MASK(2,RI),
-+ E100_STRUCT_MASK(2,DSR),
-+ E100_STRUCT_MASK(2,CD)
-+#else
-+ CONTROL_PINS_PORT_NOT_USED(2)
-+#endif
-+ },
-+
-+ /* Ser 3 */
-+ {
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+ E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR),
-+ E100_STRUCT_PORT(3,RI), E100_STRUCT_SHADOW(3,RI),
-+ E100_STRUCT_PORT(3,DSR), E100_STRUCT_SHADOW(3,DSR),
-+ E100_STRUCT_PORT(3,CD), E100_STRUCT_SHADOW(3,CD),
-+ E100_STRUCT_MASK(3,DTR),
-+ E100_STRUCT_MASK(3,RI),
-+ E100_STRUCT_MASK(3,DSR),
-+ E100_STRUCT_MASK(3,CD)
-+#else
-+ CONTROL_PINS_PORT_NOT_USED(3)
-+#endif
-+ }
-+};
-+#else /* CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
-+
-+/* All pins are on either PA or PB for each serial port */
-+#define CONTROL_PINS_PORT_NOT_USED(line) \
-+ &dummy_ser[line], &dummy_ser[line], \
-+ DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK
-+
-+
-+struct control_pins
-+{
-+ volatile unsigned char *port;
-+ unsigned char *shadow;
-+
-+ unsigned char dtr_mask;
-+ unsigned char ri_mask;
-+ unsigned char dsr_mask;
-+ unsigned char cd_mask;
-+};
-+
-+#define dtr_port port
-+#define dtr_shadow shadow
-+#define ri_port port
-+#define ri_shadow shadow
-+#define dsr_port port
-+#define dsr_shadow shadow
-+#define cd_port port
-+#define cd_shadow shadow
-+
-+static const struct control_pins e100_modem_pins[NR_PORTS] =
-+{
-+ /* Ser 0 */
-+ {
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+ E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR),
-+ E100_STRUCT_MASK(0,DTR),
-+ E100_STRUCT_MASK(0,RI),
-+ E100_STRUCT_MASK(0,DSR),
-+ E100_STRUCT_MASK(0,CD)
-+#else
-+ CONTROL_PINS_PORT_NOT_USED(0)
-+#endif
-+ },
-+
-+ /* Ser 1 */
-+ {
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+ E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR),
-+ E100_STRUCT_MASK(1,DTR),
-+ E100_STRUCT_MASK(1,RI),
-+ E100_STRUCT_MASK(1,DSR),
-+ E100_STRUCT_MASK(1,CD)
-+#else
-+ CONTROL_PINS_PORT_NOT_USED(1)
-+#endif
-+ },
-+
-+ /* Ser 2 */
-+ {
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+ E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR),
-+ E100_STRUCT_MASK(2,DTR),
-+ E100_STRUCT_MASK(2,RI),
-+ E100_STRUCT_MASK(2,DSR),
-+ E100_STRUCT_MASK(2,CD)
-+#else
-+ CONTROL_PINS_PORT_NOT_USED(2)
-+#endif
-+ },
-+
-+ /* Ser 3 */
-+ {
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+ E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR),
-+ E100_STRUCT_MASK(3,DTR),
-+ E100_STRUCT_MASK(3,RI),
-+ E100_STRUCT_MASK(3,DSR),
-+ E100_STRUCT_MASK(3,CD)
-+#else
-+ CONTROL_PINS_PORT_NOT_USED(3)
-+#endif
-+ }
-+};
-+#endif /* !CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
-+
-+#define E100_RTS_MASK 0x20
-+#define E100_CTS_MASK 0x40
-+
-+/* All serial port signals are active low:
-+ * active = 0 -> 3.3V to RS-232 driver -> -12V on RS-232 level
-+ * inactive = 1 -> 0V to RS-232 driver -> +12V on RS-232 level
-+ *
-+ * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip
-+ */
-+
-+/* Output */
-+#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK)
-+/* Input */
-+#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK)
-+
-+/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */
-+/* Is an output */
-+#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask)
-+
-+/* Normally inputs */
-+#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask)
-+#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask)
-+
-+/* Input */
-+#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask)
-+
-+
-+/*
-+ * tmp_buf is used as a temporary buffer by serial_write. We need to
-+ * lock it in case the memcpy_fromfs blocks while swapping in a page,
-+ * and some other program tries to do a serial write at the same time.
-+ * Since the lock will only come under contention when the system is
-+ * swapping and available memory is low, it makes sense to share one
-+ * buffer across all the serial ports, since it significantly saves
-+ * memory if large numbers of serial ports are open.
-+ */
-+static unsigned char *tmp_buf;
-+static DEFINE_MUTEX(tmp_buf_mutex);
-+
-+/* Calculate the chartime depending on baudrate, numbor of bits etc. */
-+static void update_char_time(struct e100_serial * info)
-+{
-+ tcflag_t cflags = info->port.tty->termios->c_cflag;
-+ int bits;
-+
-+ /* calc. number of bits / data byte */
-+ /* databits + startbit and 1 stopbit */
-+ if ((cflags & CSIZE) == CS7)
-+ bits = 9;
-+ else
-+ bits = 10;
-+
-+ if (cflags & CSTOPB) /* 2 stopbits ? */
-+ bits++;
-+
-+ if (cflags & PARENB) /* parity bit ? */
-+ bits++;
-+
-+ /* calc timeout */
-+ info->char_time_usec = ((bits * 1000000) / info->baud) + 1;
-+ info->flush_time_usec = 4*info->char_time_usec;
-+ if (info->flush_time_usec < MIN_FLUSH_TIME_USEC)
-+ info->flush_time_usec = MIN_FLUSH_TIME_USEC;
-+
-+}
-+
-+/*
-+ * This function maps from the Bxxxx defines in asm/termbits.h into real
-+ * baud rates.
-+ */
-+
-+static int
-+cflag_to_baud(unsigned int cflag)
-+{
-+ static int baud_table[] = {
-+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400,
-+ 4800, 9600, 19200, 38400 };
-+
-+ static int ext_baud_table[] = {
-+ 0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000,
-+ 0, 0, 0, 0, 0, 0, 0, 0 };
-+
-+ if (cflag & CBAUDEX)
-+ return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX];
-+ else
-+ return baud_table[cflag & CBAUD];
-+}
-+
-+/* and this maps to an etrax100 hardware baud constant */
-+
-+static unsigned char
-+cflag_to_etrax_baud(unsigned int cflag)
-+{
-+ char retval;
-+
-+ static char baud_table[] = {
-+ -1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 };
-+
-+ static char ext_baud_table[] = {
-+ -1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 };
-+
-+ if (cflag & CBAUDEX)
-+ retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX];
-+ else
-+ retval = baud_table[cflag & CBAUD];
-+
-+ if (retval < 0) {
-+ printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag);
-+ retval = 5; /* choose default 9600 instead */
-+ }
-+
-+ return retval | (retval << 4); /* choose same for both TX and RX */
-+}
-+
-+
-+/* Various static support functions */
-+
-+/* Functions to set or clear DTR/RTS on the requested line */
-+/* It is complicated by the fact that RTS is a serial port register, while
-+ * DTR might not be implemented in the HW at all, and if it is, it can be on
-+ * any general port.
-+ */
-+
-+
-+static inline void
-+e100_dtr(struct e100_serial *info, int set)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+ unsigned char mask = e100_modem_pins[info->line].dtr_mask;
-+
-+#ifdef SERIAL_DEBUG_IO
-+ printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask);
-+ printk("ser%i shadow before 0x%02X get: %i\n",
-+ info->line, *e100_modem_pins[info->line].dtr_shadow,
-+ E100_DTR_GET(info));
-+#endif
-+ /* DTR is active low */
-+ {
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ *e100_modem_pins[info->line].dtr_shadow &= ~mask;
-+ *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask);
-+ *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow;
-+ local_irq_restore(flags);
-+ }
-+
-+#ifdef SERIAL_DEBUG_IO
-+ printk("ser%i shadow after 0x%02X get: %i\n",
-+ info->line, *e100_modem_pins[info->line].dtr_shadow,
-+ E100_DTR_GET(info));
-+#endif
-+#endif
-+}
-+
-+/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
-+ * 0=0V , 1=3.3V
-+ */
-+static inline void
-+e100_rts(struct e100_serial *info, int set)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+ unsigned long flags;
-+ local_irq_save(flags);
-+ info->rx_ctrl &= ~E100_RTS_MASK;
-+ info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */
-+ info->ioport[REG_REC_CTRL] = info->rx_ctrl;
-+ local_irq_restore(flags);
-+#ifdef SERIAL_DEBUG_IO
-+ printk("ser%i rts %i\n", info->line, set);
-+#endif
-+#endif
-+}
-+
-+
-+/* If this behaves as a modem, RI and CD is an output */
-+static inline void
-+e100_ri_out(struct e100_serial *info, int set)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+ /* RI is active low */
-+ {
-+ unsigned char mask = e100_modem_pins[info->line].ri_mask;
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ *e100_modem_pins[info->line].ri_shadow &= ~mask;
-+ *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask);
-+ *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
-+ local_irq_restore(flags);
-+ }
-+#endif
-+}
-+static inline void
-+e100_cd_out(struct e100_serial *info, int set)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+ /* CD is active low */
-+ {
-+ unsigned char mask = e100_modem_pins[info->line].cd_mask;
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ *e100_modem_pins[info->line].cd_shadow &= ~mask;
-+ *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask);
-+ *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
-+ local_irq_restore(flags);
-+ }
-+#endif
-+}
-+
-+static inline void
-+e100_disable_rx(struct e100_serial *info)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+ /* disable the receiver */
-+ info->ioport[REG_REC_CTRL] =
-+ (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-+#endif
-+}
-+
-+static inline void
-+e100_enable_rx(struct e100_serial *info)
-+{
-+#ifndef CONFIG_SVINTO_SIM
-+ /* enable the receiver */
-+ info->ioport[REG_REC_CTRL] =
-+ (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
-+#endif
-+}
-+
-+/* the rx DMA uses both the dma_descr and the dma_eop interrupts */
-+
-+static inline void
-+e100_disable_rxdma_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("rxdma_irq(%d): 0\n",info->line);
-+#endif
-+ DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line));
-+ *R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3);
-+}
-+
-+static inline void
-+e100_enable_rxdma_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("rxdma_irq(%d): 1\n",info->line);
-+#endif
-+ DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line));
-+ *R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3);
-+}
-+
-+/* the tx DMA uses only dma_descr interrupt */
-+
-+static void e100_disable_txdma_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("txdma_irq(%d): 0\n",info->line);
-+#endif
-+ DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line));
-+ *R_IRQ_MASK2_CLR = info->irq;
-+}
-+
-+static void e100_enable_txdma_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("txdma_irq(%d): 1\n",info->line);
-+#endif
-+ DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line));
-+ *R_IRQ_MASK2_SET = info->irq;
-+}
-+
-+static void e100_disable_txdma_channel(struct e100_serial *info)
-+{
-+ unsigned long flags;
-+
-+ /* Disable output DMA channel for the serial port in question
-+ * ( set to something other than serialX)
-+ */
-+ local_irq_save(flags);
-+ DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
-+ if (info->line == 0) {
-+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) ==
-+ IO_STATE(R_GEN_CONFIG, dma6, serial0)) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused);
-+ }
-+ } else if (info->line == 1) {
-+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) ==
-+ IO_STATE(R_GEN_CONFIG, dma8, serial1)) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb);
-+ }
-+ } else if (info->line == 2) {
-+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) ==
-+ IO_STATE(R_GEN_CONFIG, dma2, serial2)) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0);
-+ }
-+ } else if (info->line == 3) {
-+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) ==
-+ IO_STATE(R_GEN_CONFIG, dma4, serial3)) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1);
-+ }
-+ }
-+ *R_GEN_CONFIG = genconfig_shadow;
-+ local_irq_restore(flags);
-+}
-+
-+
-+static void e100_enable_txdma_channel(struct e100_serial *info)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line));
-+ /* Enable output DMA channel for the serial port in question */
-+ if (info->line == 0) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0);
-+ } else if (info->line == 1) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1);
-+ } else if (info->line == 2) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2);
-+ } else if (info->line == 3) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3);
-+ }
-+ *R_GEN_CONFIG = genconfig_shadow;
-+ local_irq_restore(flags);
-+}
-+
-+static void e100_disable_rxdma_channel(struct e100_serial *info)
-+{
-+ unsigned long flags;
-+
-+ /* Disable input DMA channel for the serial port in question
-+ * ( set to something other than serialX)
-+ */
-+ local_irq_save(flags);
-+ if (info->line == 0) {
-+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) ==
-+ IO_STATE(R_GEN_CONFIG, dma7, serial0)) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused);
-+ }
-+ } else if (info->line == 1) {
-+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) ==
-+ IO_STATE(R_GEN_CONFIG, dma9, serial1)) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb);
-+ }
-+ } else if (info->line == 2) {
-+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) ==
-+ IO_STATE(R_GEN_CONFIG, dma3, serial2)) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0);
-+ }
-+ } else if (info->line == 3) {
-+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) ==
-+ IO_STATE(R_GEN_CONFIG, dma5, serial3)) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1);
-+ }
-+ }
-+ *R_GEN_CONFIG = genconfig_shadow;
-+ local_irq_restore(flags);
-+}
-+
-+
-+static void e100_enable_rxdma_channel(struct e100_serial *info)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ /* Enable input DMA channel for the serial port in question */
-+ if (info->line == 0) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0);
-+ } else if (info->line == 1) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1);
-+ } else if (info->line == 2) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2);
-+ } else if (info->line == 3) {
-+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5);
-+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3);
-+ }
-+ *R_GEN_CONFIG = genconfig_shadow;
-+ local_irq_restore(flags);
-+}
-+
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+/* in order to detect and fix errors on the first byte
-+ we have to use the serial interrupts as well. */
-+
-+static inline void
-+e100_disable_serial_data_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("ser_irq(%d): 0\n",info->line);
-+#endif
-+ DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line));
-+ *R_IRQ_MASK1_CLR = (1U << (8+2*info->line));
-+}
-+
-+static inline void
-+e100_enable_serial_data_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("ser_irq(%d): 1\n",info->line);
-+ printk("**** %d = %d\n",
-+ (8+2*info->line),
-+ (1U << (8+2*info->line)));
-+#endif
-+ DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line));
-+ *R_IRQ_MASK1_SET = (1U << (8+2*info->line));
-+}
-+#endif
-+
-+static inline void
-+e100_disable_serial_tx_ready_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("ser_tx_irq(%d): 0\n",info->line);
-+#endif
-+ DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line));
-+ *R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line));
-+}
-+
-+static inline void
-+e100_enable_serial_tx_ready_irq(struct e100_serial *info)
-+{
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("ser_tx_irq(%d): 1\n",info->line);
-+ printk("**** %d = %d\n",
-+ (8+1+2*info->line),
-+ (1U << (8+1+2*info->line)));
-+#endif
-+ DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line));
-+ *R_IRQ_MASK1_SET = (1U << (8+1+2*info->line));
-+}
-+
-+static inline void e100_enable_rx_irq(struct e100_serial *info)
-+{
-+ if (info->uses_dma_in)
-+ e100_enable_rxdma_irq(info);
-+ else
-+ e100_enable_serial_data_irq(info);
-+}
-+static inline void e100_disable_rx_irq(struct e100_serial *info)
-+{
-+ if (info->uses_dma_in)
-+ e100_disable_rxdma_irq(info);
-+ else
-+ e100_disable_serial_data_irq(info);
-+}
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+/* Enable RS-485 mode on selected port. This is UGLY. */
-+static int
-+e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)
-+{
-+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+
-+#if defined(CONFIG_ETRAX_RS485_ON_PA)
-+ *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit);
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+ rs485_port_g_bit, 1);
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_LTC1387)
-+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+ CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1);
-+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+ CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
-+#endif
-+
-+ info->rs485.flags = r->flags;
-+ if (r->delay_rts_before_send >= 1000)
-+ info->rs485.delay_rts_before_send = 1000;
-+ else
-+ info->rs485.delay_rts_before_send = r->delay_rts_before_send;
-+/* printk("rts: on send = %i, after = %i, enabled = %i",
-+ info->rs485.rts_on_send,
-+ info->rs485.rts_after_sent,
-+ info->rs485.enabled
-+ );
-+*/
-+ return 0;
-+}
-+
-+static int
-+e100_write_rs485(struct tty_struct *tty,
-+ const unsigned char *buf, int count)
-+{
-+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+ int old_value = (info->rs485.flags) & SER_RS485_ENABLED;
-+
-+ /* rs485 is always implicitly enabled if we're using the ioctl()
-+ * but it doesn't have to be set in the serial_rs485
-+ * (to be backward compatible with old apps)
-+ * So we store, set and restore it.
-+ */
-+ info->rs485.flags |= SER_RS485_ENABLED;
-+ /* rs_write now deals with RS485 if enabled */
-+ count = rs_write(tty, buf, count);
-+ if (!old_value)
-+ info->rs485.flags &= ~(SER_RS485_ENABLED);
-+ return count;
-+}
-+
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+/* Timer function to toggle RTS when using FAST_TIMER */
-+static void rs485_toggle_rts_timer_function(unsigned long data)
-+{
-+ struct e100_serial *info = (struct e100_serial *)data;
-+
-+ fast_timers_rs485[info->line].function = NULL;
-+ e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
-+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
-+ e100_enable_rx(info);
-+ e100_enable_rx_irq(info);
-+#endif
-+}
-+#endif
-+#endif /* CONFIG_ETRAX_RS485 */
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_stop() and rs_start()
-+ *
-+ * This routines are called before setting or resetting tty->stopped.
-+ * They enable or disable transmitter using the XOFF registers, as necessary.
-+ * ------------------------------------------------------------
-+ */
-+
-+static void
-+rs_stop(struct tty_struct *tty)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ if (info) {
-+ unsigned long flags;
-+ unsigned long xoff;
-+
-+ local_irq_save(flags);
-+ DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n",
-+ CIRC_CNT(info->xmit.head,
-+ info->xmit.tail,SERIAL_XMIT_SIZE)));
-+
-+ xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char,
-+ STOP_CHAR(info->port.tty));
-+ xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
-+ if (tty->termios->c_iflag & IXON ) {
-+ xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
-+ }
-+
-+ *((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
-+ local_irq_restore(flags);
-+ }
-+}
-+
-+static void
-+rs_start(struct tty_struct *tty)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ if (info) {
-+ unsigned long flags;
-+ unsigned long xoff;
-+
-+ local_irq_save(flags);
-+ DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n",
-+ CIRC_CNT(info->xmit.head,
-+ info->xmit.tail,SERIAL_XMIT_SIZE)));
-+ xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty));
-+ xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
-+ if (tty->termios->c_iflag & IXON ) {
-+ xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
-+ }
-+
-+ *((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
-+ if (!info->uses_dma_out &&
-+ info->xmit.head != info->xmit.tail && info->xmit.buf)
-+ e100_enable_serial_tx_ready_irq(info);
-+
-+ local_irq_restore(flags);
-+ }
-+}
-+
-+/*
-+ * ----------------------------------------------------------------------
-+ *
-+ * Here starts the interrupt handling routines. All of the following
-+ * subroutines are declared as inline and are folded into
-+ * rs_interrupt(). They were separated out for readability's sake.
-+ *
-+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
-+ * runs with interrupts turned off. People who may want to modify
-+ * rs_interrupt() should try to keep the interrupt handler as fast as
-+ * possible. After you are done making modifications, it is not a bad
-+ * idea to do:
-+ *
-+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
-+ *
-+ * and look at the resulting assemble code in serial.s.
-+ *
-+ * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
-+ * -----------------------------------------------------------------------
-+ */
-+
-+/*
-+ * This routine is used by the interrupt handler to schedule
-+ * processing in the software interrupt portion of the driver.
-+ */
-+static void rs_sched_event(struct e100_serial *info, int event)
-+{
-+ if (info->event & (1 << event))
-+ return;
-+ info->event |= 1 << event;
-+ schedule_work(&info->work);
-+}
-+
-+/* The output DMA channel is free - use it to send as many chars as possible
-+ * NOTES:
-+ * We don't pay attention to info->x_char, which means if the TTY wants to
-+ * use XON/XOFF it will set info->x_char but we won't send any X char!
-+ *
-+ * To implement this, we'd just start a DMA send of 1 byte pointing at a
-+ * buffer containing the X char, and skip updating xmit. We'd also have to
-+ * check if the last sent char was the X char when we enter this function
-+ * the next time, to avoid updating xmit with the sent X value.
-+ */
-+
-+static void
-+transmit_chars_dma(struct e100_serial *info)
-+{
-+ unsigned int c, sentl;
-+ struct etrax_dma_descr *descr;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+ /* This will output too little if tail is not 0 always since
-+ * we don't reloop to send the other part. Anyway this SHOULD be a
-+ * no-op - transmit_chars_dma would never really be called during sim
-+ * since rs_write does not write into the xmit buffer then.
-+ */
-+ if (info->xmit.tail)
-+ printk("Error in serial.c:transmit_chars-dma(), tail!=0\n");
-+ if (info->xmit.head != info->xmit.tail) {
-+ SIMCOUT(info->xmit.buf + info->xmit.tail,
-+ CIRC_CNT(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE));
-+ info->xmit.head = info->xmit.tail; /* move back head */
-+ info->tr_running = 0;
-+ }
-+ return;
-+#endif
-+ /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
-+ *info->oclrintradr =
-+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
-+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
-+
-+#ifdef SERIAL_DEBUG_INTR
-+ if (info->line == SERIAL_DEBUG_LINE)
-+ printk("tc\n");
-+#endif
-+ if (!info->tr_running) {
-+ /* weirdo... we shouldn't get here! */
-+ printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n");
-+ return;
-+ }
-+
-+ descr = &info->tr_descr;
-+
-+ /* first get the amount of bytes sent during the last DMA transfer,
-+ and update xmit accordingly */
-+
-+ /* if the stop bit was not set, all data has been sent */
-+ if (!(descr->status & d_stop)) {
-+ sentl = descr->sw_len;
-+ } else
-+ /* otherwise we find the amount of data sent here */
-+ sentl = descr->hw_len;
-+
-+ DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl));
-+
-+ /* update stats */
-+ info->icount.tx += sentl;
-+
-+ /* update xmit buffer */
-+ info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1);
-+
-+ /* if there is only a few chars left in the buf, wake up the blocked
-+ write if any */
-+ if (CIRC_CNT(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
-+ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-+
-+ /* find out the largest amount of consecutive bytes we want to send now */
-+
-+ c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+
-+ /* Don't send all in one DMA transfer - divide it so we wake up
-+ * application before all is sent
-+ */
-+
-+ if (c >= 4*WAKEUP_CHARS)
-+ c = c/2;
-+
-+ if (c <= 0) {
-+ /* our job here is done, don't schedule any new DMA transfer */
-+ info->tr_running = 0;
-+
-+#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
-+ if (info->rs485.flags & SER_RS485_ENABLED) {
-+ /* Set a short timer to toggle RTS */
-+ start_one_shot_timer(&fast_timers_rs485[info->line],
-+ rs485_toggle_rts_timer_function,
-+ (unsigned long)info,
-+ info->char_time_usec*2,
-+ "RS-485");
-+ }
-+#endif /* RS485 */
-+ return;
-+ }
-+
-+ /* ok we can schedule a dma send of c chars starting at info->xmit.tail */
-+ /* set up the descriptor correctly for output */
-+ DFLOW(DEBUG_LOG(info->line, "TX %i\n", c));
-+ descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */
-+ descr->sw_len = c;
-+ descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail);
-+ descr->status = 0;
-+
-+ *info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */
-+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start);
-+
-+ /* DMA is now running (hopefully) */
-+} /* transmit_chars_dma */
-+
-+static void
-+start_transmit(struct e100_serial *info)
-+{
-+#if 0
-+ if (info->line == SERIAL_DEBUG_LINE)
-+ printk("x\n");
-+#endif
-+
-+ info->tr_descr.sw_len = 0;
-+ info->tr_descr.hw_len = 0;
-+ info->tr_descr.status = 0;
-+ info->tr_running = 1;
-+ if (info->uses_dma_out)
-+ transmit_chars_dma(info);
-+ else
-+ e100_enable_serial_tx_ready_irq(info);
-+} /* start_transmit */
-+
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+static int serial_fast_timer_started = 0;
-+static int serial_fast_timer_expired = 0;
-+static void flush_timeout_function(unsigned long data);
-+#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\
-+ unsigned long timer_flags; \
-+ local_irq_save(timer_flags); \
-+ if (fast_timers[info->line].function == NULL) { \
-+ serial_fast_timer_started++; \
-+ TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \
-+ TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \
-+ start_one_shot_timer(&fast_timers[info->line], \
-+ flush_timeout_function, \
-+ (unsigned long)info, \
-+ (usec), \
-+ string); \
-+ } \
-+ else { \
-+ TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \
-+ } \
-+ local_irq_restore(timer_flags); \
-+}
-+#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec)
-+
-+#else
-+#define START_FLUSH_FAST_TIMER_TIME(info, string, usec)
-+#define START_FLUSH_FAST_TIMER(info, string)
-+#endif
-+
-+static struct etrax_recv_buffer *
-+alloc_recv_buffer(unsigned int size)
-+{
-+ struct etrax_recv_buffer *buffer;
-+
-+ if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC)))
-+ return NULL;
-+
-+ buffer->next = NULL;
-+ buffer->length = 0;
-+ buffer->error = TTY_NORMAL;
-+
-+ return buffer;
-+}
-+
-+static void
-+append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ if (!info->first_recv_buffer)
-+ info->first_recv_buffer = buffer;
-+ else
-+ info->last_recv_buffer->next = buffer;
-+
-+ info->last_recv_buffer = buffer;
-+
-+ info->recv_cnt += buffer->length;
-+ if (info->recv_cnt > info->max_recv_cnt)
-+ info->max_recv_cnt = info->recv_cnt;
-+
-+ local_irq_restore(flags);
-+}
-+
-+static int
-+add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag)
-+{
-+ struct etrax_recv_buffer *buffer;
-+ if (info->uses_dma_in) {
-+ if (!(buffer = alloc_recv_buffer(4)))
-+ return 0;
-+
-+ buffer->length = 1;
-+ buffer->error = flag;
-+ buffer->buffer[0] = data;
-+
-+ append_recv_buffer(info, buffer);
-+
-+ info->icount.rx++;
-+ } else {
-+ struct tty_struct *tty = info->port.tty;
-+ tty_insert_flip_char(tty, data, flag);
-+ info->icount.rx++;
-+ }
-+
-+ return 1;
-+}
-+
-+static unsigned int handle_descr_data(struct e100_serial *info,
-+ struct etrax_dma_descr *descr,
-+ unsigned int recvl)
-+{
-+ struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer;
-+
-+ if (info->recv_cnt + recvl > 65536) {
-+ printk(KERN_CRIT
-+ "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl);
-+ return 0;
-+ }
-+
-+ buffer->length = recvl;
-+
-+ if (info->errorcode == ERRCODE_SET_BREAK)
-+ buffer->error = TTY_BREAK;
-+ info->errorcode = 0;
-+
-+ append_recv_buffer(info, buffer);
-+
-+ if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
-+ panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
-+
-+ descr->buf = virt_to_phys(buffer->buffer);
-+
-+ return recvl;
-+}
-+
-+static unsigned int handle_all_descr_data(struct e100_serial *info)
-+{
-+ struct etrax_dma_descr *descr;
-+ unsigned int recvl;
-+ unsigned int ret = 0;
-+
-+ while (1)
-+ {
-+ descr = &info->rec_descr[info->cur_rec_descr];
-+
-+ if (descr == phys_to_virt(*info->idescradr))
-+ break;
-+
-+ if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS)
-+ info->cur_rec_descr = 0;
-+
-+ /* find out how many bytes were read */
-+
-+ /* if the eop bit was not set, all data has been received */
-+ if (!(descr->status & d_eop)) {
-+ recvl = descr->sw_len;
-+ } else {
-+ /* otherwise we find the amount of data received here */
-+ recvl = descr->hw_len;
-+ }
-+
-+ /* Reset the status information */
-+ descr->status = 0;
-+
-+ DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl);
-+ if (info->port.tty->stopped) {
-+ unsigned char *buf = phys_to_virt(descr->buf);
-+ DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]);
-+ DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]);
-+ DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]);
-+ }
-+ );
-+
-+ /* update stats */
-+ info->icount.rx += recvl;
-+
-+ ret += handle_descr_data(info, descr, recvl);
-+ }
-+
-+ return ret;
-+}
-+
-+static void receive_chars_dma(struct e100_serial *info)
-+{
-+ struct tty_struct *tty;
-+ unsigned char rstat;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+ /* No receive in the simulator. Will probably be when the rest of
-+ * the serial interface works, and this piece will just be removed.
-+ */
-+ return;
-+#endif
-+
-+ /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
-+ *info->iclrintradr =
-+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
-+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
-+
-+ tty = info->port.tty;
-+ if (!tty) /* Something wrong... */
-+ return;
-+
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+ if (info->uses_dma_in)
-+ e100_enable_serial_data_irq(info);
-+#endif
-+
-+ if (info->errorcode == ERRCODE_INSERT_BREAK)
-+ add_char_and_flag(info, '\0', TTY_BREAK);
-+
-+ handle_all_descr_data(info);
-+
-+ /* Read the status register to detect errors */
-+ rstat = info->ioport[REG_STATUS];
-+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
-+ DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat));
-+ }
-+
-+ if (rstat & SER_ERROR_MASK) {
-+ /* If we got an error, we must reset it by reading the
-+ * data_in field
-+ */
-+ unsigned char data = info->ioport[REG_DATA];
-+
-+ PROCSTAT(ser_stat[info->line].errors_cnt++);
-+ DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n",
-+ ((rstat & SER_ERROR_MASK) << 8) | data);
-+
-+ if (rstat & SER_PAR_ERR_MASK)
-+ add_char_and_flag(info, data, TTY_PARITY);
-+ else if (rstat & SER_OVERRUN_MASK)
-+ add_char_and_flag(info, data, TTY_OVERRUN);
-+ else if (rstat & SER_FRAMING_ERR_MASK)
-+ add_char_and_flag(info, data, TTY_FRAME);
-+ }
-+
-+ START_FLUSH_FAST_TIMER(info, "receive_chars");
-+
-+ /* Restart the receiving DMA */
-+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
-+}
-+
-+static int start_recv_dma(struct e100_serial *info)
-+{
-+ struct etrax_dma_descr *descr = info->rec_descr;
-+ struct etrax_recv_buffer *buffer;
-+ int i;
-+
-+ /* Set up the receiving descriptors */
-+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
-+ if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
-+ panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
-+
-+ descr[i].ctrl = d_int;
-+ descr[i].buf = virt_to_phys(buffer->buffer);
-+ descr[i].sw_len = SERIAL_DESCR_BUF_SIZE;
-+ descr[i].hw_len = 0;
-+ descr[i].status = 0;
-+ descr[i].next = virt_to_phys(&descr[i+1]);
-+ }
-+
-+ /* Link the last descriptor to the first */
-+ descr[i-1].next = virt_to_phys(&descr[0]);
-+
-+ /* Start with the first descriptor in the list */
-+ info->cur_rec_descr = 0;
-+
-+ /* Start the DMA */
-+ *info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]);
-+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start);
-+
-+ /* Input DMA should be running now */
-+ return 1;
-+}
-+
-+static void
-+start_receive(struct e100_serial *info)
-+{
-+#ifdef CONFIG_SVINTO_SIM
-+ /* No receive in the simulator. Will probably be when the rest of
-+ * the serial interface works, and this piece will just be removed.
-+ */
-+ return;
-+#endif
-+ if (info->uses_dma_in) {
-+ /* reset the input dma channel to be sure it works */
-+
-+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+ while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) ==
-+ IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
-+
-+ start_recv_dma(info);
-+ }
-+}
-+
-+
-+/* the bits in the MASK2 register are laid out like this:
-+ DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR
-+ where I is the input channel and O is the output channel for the port.
-+ info->irq is the bit number for the DMAO_DESCR so to check the others we
-+ shift info->irq to the left.
-+*/
-+
-+/* dma output channel interrupt handler
-+ this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or
-+ DMA8(ser1) when they have finished a descriptor with the intr flag set.
-+*/
-+
-+static irqreturn_t
-+tr_interrupt(int irq, void *dev_id)
-+{
-+ struct e100_serial *info;
-+ unsigned long ireg;
-+ int i;
-+ int handled = 0;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+ /* No receive in the simulator. Will probably be when the rest of
-+ * the serial interface works, and this piece will just be removed.
-+ */
-+ {
-+ const char *s = "What? tr_interrupt in simulator??\n";
-+ SIMCOUT(s,strlen(s));
-+ }
-+ return IRQ_HANDLED;
-+#endif
-+
-+ /* find out the line that caused this irq and get it from rs_table */
-+
-+ ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */
-+
-+ for (i = 0; i < NR_PORTS; i++) {
-+ info = rs_table + i;
-+ if (!info->enabled || !info->uses_dma_out)
-+ continue;
-+ /* check for dma_descr (don't need to check for dma_eop in output dma for serial */
-+ if (ireg & info->irq) {
-+ handled = 1;
-+ /* we can send a new dma bunch. make it so. */
-+ DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i));
-+ /* Read jiffies_usec first,
-+ * we want this time to be as late as possible
-+ */
-+ PROCSTAT(ser_stat[info->line].tx_dma_ints++);
-+ info->last_tx_active_usec = GET_JIFFIES_USEC();
-+ info->last_tx_active = jiffies;
-+ transmit_chars_dma(info);
-+ }
-+
-+ /* FIXME: here we should really check for a change in the
-+ status lines and if so call status_handle(info) */
-+ }
-+ return IRQ_RETVAL(handled);
-+} /* tr_interrupt */
-+
-+/* dma input channel interrupt handler */
-+
-+static irqreturn_t
-+rec_interrupt(int irq, void *dev_id)
-+{
-+ struct e100_serial *info;
-+ unsigned long ireg;
-+ int i;
-+ int handled = 0;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+ /* No receive in the simulator. Will probably be when the rest of
-+ * the serial interface works, and this piece will just be removed.
-+ */
-+ {
-+ const char *s = "What? rec_interrupt in simulator??\n";
-+ SIMCOUT(s,strlen(s));
-+ }
-+ return IRQ_HANDLED;
-+#endif
-+
-+ /* find out the line that caused this irq and get it from rs_table */
-+
-+ ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */
-+
-+ for (i = 0; i < NR_PORTS; i++) {
-+ info = rs_table + i;
-+ if (!info->enabled || !info->uses_dma_in)
-+ continue;
-+ /* check for both dma_eop and dma_descr for the input dma channel */
-+ if (ireg & ((info->irq << 2) | (info->irq << 3))) {
-+ handled = 1;
-+ /* we have received something */
-+ receive_chars_dma(info);
-+ }
-+
-+ /* FIXME: here we should really check for a change in the
-+ status lines and if so call status_handle(info) */
-+ }
-+ return IRQ_RETVAL(handled);
-+} /* rec_interrupt */
-+
-+static int force_eop_if_needed(struct e100_serial *info)
-+{
-+ /* We check data_avail bit to determine if data has
-+ * arrived since last time
-+ */
-+ unsigned char rstat = info->ioport[REG_STATUS];
-+
-+ /* error or datavail? */
-+ if (rstat & SER_ERROR_MASK) {
-+ /* Some error has occurred. If there has been valid data, an
-+ * EOP interrupt will be made automatically. If no data, the
-+ * normal ser_interrupt should be enabled and handle it.
-+ * So do nothing!
-+ */
-+ DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n",
-+ rstat | (info->line << 8));
-+ return 0;
-+ }
-+
-+ if (rstat & SER_DATA_AVAIL_MASK) {
-+ /* Ok data, no error, count it */
-+ TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n",
-+ rstat | (info->line << 8)));
-+ /* Read data to clear status flags */
-+ (void)info->ioport[REG_DATA];
-+
-+ info->forced_eop = 0;
-+ START_FLUSH_FAST_TIMER(info, "magic");
-+ return 0;
-+ }
-+
-+ /* hit the timeout, force an EOP for the input
-+ * dma channel if we haven't already
-+ */
-+ if (!info->forced_eop) {
-+ info->forced_eop = 1;
-+ PROCSTAT(ser_stat[info->line].timeout_flush_cnt++);
-+ TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line));
-+ FORCE_EOP(info);
-+ }
-+
-+ return 1;
-+}
-+
-+static void flush_to_flip_buffer(struct e100_serial *info)
-+{
-+ struct tty_struct *tty;
-+ struct etrax_recv_buffer *buffer;
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ tty = info->port.tty;
-+
-+ if (!tty) {
-+ local_irq_restore(flags);
-+ return;
-+ }
-+
-+ while ((buffer = info->first_recv_buffer) != NULL) {
-+ unsigned int count = buffer->length;
-+
-+ tty_insert_flip_string(tty, buffer->buffer, count);
-+ info->recv_cnt -= count;
-+
-+ if (count == buffer->length) {
-+ info->first_recv_buffer = buffer->next;
-+ kfree(buffer);
-+ } else {
-+ buffer->length -= count;
-+ memmove(buffer->buffer, buffer->buffer + count, buffer->length);
-+ buffer->error = TTY_NORMAL;
-+ }
-+ }
-+
-+ if (!info->first_recv_buffer)
-+ info->last_recv_buffer = NULL;
-+
-+ local_irq_restore(flags);
-+
-+ /* This includes a check for low-latency */
-+ tty_flip_buffer_push(tty);
-+}
-+
-+static void check_flush_timeout(struct e100_serial *info)
-+{
-+ /* Flip what we've got (if we can) */
-+ flush_to_flip_buffer(info);
-+
-+ /* We might need to flip later, but not to fast
-+ * since the system is busy processing input... */
-+ if (info->first_recv_buffer)
-+ START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000);
-+
-+ /* Force eop last, since data might have come while we're processing
-+ * and if we started the slow timer above, we won't start a fast
-+ * below.
-+ */
-+ force_eop_if_needed(info);
-+}
-+
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+static void flush_timeout_function(unsigned long data)
-+{
-+ struct e100_serial *info = (struct e100_serial *)data;
-+
-+ fast_timers[info->line].function = NULL;
-+ serial_fast_timer_expired++;
-+ TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line));
-+ TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired));
-+ check_flush_timeout(info);
-+}
-+
-+#else
-+
-+/* dma fifo/buffer timeout handler
-+ forces an end-of-packet for the dma input channel if no chars
-+ have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s.
-+*/
-+
-+static struct timer_list flush_timer;
-+
-+static void
-+timed_flush_handler(unsigned long ptr)
-+{
-+ struct e100_serial *info;
-+ int i;
-+
-+#ifdef CONFIG_SVINTO_SIM
-+ return;
-+#endif
-+
-+ for (i = 0; i < NR_PORTS; i++) {
-+ info = rs_table + i;
-+ if (info->uses_dma_in)
-+ check_flush_timeout(info);
-+ }
-+
-+ /* restart flush timer */
-+ mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS);
-+}
-+#endif
-+
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+
-+/* If there is an error (ie break) when the DMA is running and
-+ * there are no bytes in the fifo the DMA is stopped and we get no
-+ * eop interrupt. Thus we have to monitor the first bytes on a DMA
-+ * transfer, and if it is without error we can turn the serial
-+ * interrupts off.
-+ */
-+
-+/*
-+BREAK handling on ETRAX 100:
-+ETRAX will generate interrupt although there is no stop bit between the
-+characters.
-+
-+Depending on how long the break sequence is, the end of the breaksequence
-+will look differently:
-+| indicates start/end of a character.
-+
-+B= Break character (0x00) with framing error.
-+E= Error byte with parity error received after B characters.
-+F= "Faked" valid byte received immediately after B characters.
-+V= Valid byte
-+
-+1.
-+ B BL ___________________________ V
-+.._|__________|__________| |valid data |
-+
-+Multiple frame errors with data == 0x00 (B),
-+the timing matches up "perfectly" so no extra ending char is detected.
-+The RXD pin is 1 in the last interrupt, in that case
-+we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really
-+know if another byte will come and this really is case 2. below
-+(e.g F=0xFF or 0xFE)
-+If RXD pin is 0 we can expect another character (see 2. below).
-+
-+
-+2.
-+
-+ B B E or F__________________..__ V
-+.._|__________|__________|______ | |valid data
-+ "valid" or
-+ parity error
-+
-+Multiple frame errors with data == 0x00 (B),
-+but the part of the break trigs is interpreted as a start bit (and possibly
-+some 0 bits followed by a number of 1 bits and a stop bit).
-+Depending on parity settings etc. this last character can be either
-+a fake "valid" char (F) or have a parity error (E).
-+
-+If the character is valid it will be put in the buffer,
-+we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt
-+will set the flags so the tty will handle it,
-+if it's an error byte it will not be put in the buffer
-+and we set info->errorcode = ERRCODE_INSERT_BREAK.
-+
-+To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp
-+of the last faulty char (B) and compares it with the current time:
-+If the time elapsed time is less then 2*char_time_usec we will assume
-+it's a faked F char and not a Valid char and set
-+info->errorcode = ERRCODE_SET_BREAK.
-+
-+Flaws in the above solution:
-+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-+We use the timer to distinguish a F character from a V character,
-+if a V character is to close after the break we might make the wrong decision.
-+
-+TODO: The break will be delayed until an F or V character is received.
-+
-+*/
-+
-+static
-+struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
-+{
-+ unsigned long data_read;
-+ struct tty_struct *tty = info->port.tty;
-+
-+ if (!tty) {
-+ printk("!NO TTY!\n");
-+ return info;
-+ }
-+
-+ /* Read data and status at the same time */
-+ data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
-+more_data:
-+ if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) {
-+ DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
-+ }
-+ DINTR2(DEBUG_LOG(info->line, "ser_rx %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)));
-+
-+ if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) |
-+ IO_MASK(R_SERIAL0_READ, par_err) |
-+ IO_MASK(R_SERIAL0_READ, overrun) )) {
-+ /* An error */
-+ info->last_rx_active_usec = GET_JIFFIES_USEC();
-+ info->last_rx_active = jiffies;
-+ DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read));
-+ DLOG_INT_TRIG(
-+ if (!log_int_trig1_pos) {
-+ log_int_trig1_pos = log_int_pos;
-+ log_int(rdpc(), 0, 0);
-+ }
-+ );
-+
-+
-+ if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) &&
-+ (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) {
-+ /* Most likely a break, but we get interrupts over and
-+ * over again.
-+ */
-+
-+ if (!info->break_detected_cnt) {
-+ DEBUG_LOG(info->line, "#BRK start\n", 0);
-+ }
-+ if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) {
-+ /* The RX pin is high now, so the break
-+ * must be over, but....
-+ * we can't really know if we will get another
-+ * last byte ending the break or not.
-+ * And we don't know if the byte (if any) will
-+ * have an error or look valid.
-+ */
-+ DEBUG_LOG(info->line, "# BL BRK\n", 0);
-+ info->errorcode = ERRCODE_INSERT_BREAK;
-+ }
-+ info->break_detected_cnt++;
-+ } else {
-+ /* The error does not look like a break, but could be
-+ * the end of one
-+ */
-+ if (info->break_detected_cnt) {
-+ DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
-+ info->errorcode = ERRCODE_INSERT_BREAK;
-+ } else {
-+ unsigned char data = IO_EXTRACT(R_SERIAL0_READ,
-+ data_in, data_read);
-+ char flag = TTY_NORMAL;
-+ if (info->errorcode == ERRCODE_INSERT_BREAK) {
-+ struct tty_struct *tty = info->port.tty;
-+ tty_insert_flip_char(tty, 0, flag);
-+ info->icount.rx++;
-+ }
-+
-+ if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) {
-+ info->icount.parity++;
-+ flag = TTY_PARITY;
-+ } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) {
-+ info->icount.overrun++;
-+ flag = TTY_OVERRUN;
-+ } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) {
-+ info->icount.frame++;
-+ flag = TTY_FRAME;
-+ }
-+ tty_insert_flip_char(tty, data, flag);
-+ info->errorcode = 0;
-+ }
-+ info->break_detected_cnt = 0;
-+ }
-+ } else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
-+ /* No error */
-+ DLOG_INT_TRIG(
-+ if (!log_int_trig1_pos) {
-+ if (log_int_pos >= log_int_size) {
-+ log_int_pos = 0;
-+ }
-+ log_int_trig0_pos = log_int_pos;
-+ log_int(rdpc(), 0, 0);
-+ }
-+ );
-+ tty_insert_flip_char(tty,
-+ IO_EXTRACT(R_SERIAL0_READ, data_in, data_read),
-+ TTY_NORMAL);
-+ } else {
-+ DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read);
-+ }
-+
-+
-+ info->icount.rx++;
-+ data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]);
-+ if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
-+ DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read));
-+ goto more_data;
-+ }
-+
-+ tty_flip_buffer_push(info->port.tty);
-+ return info;
-+}
-+
-+static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
-+{
-+ unsigned char rstat;
-+
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("Interrupt from serport %d\n", i);
-+#endif
-+/* DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */
-+ if (!info->uses_dma_in) {
-+ return handle_ser_rx_interrupt_no_dma(info);
-+ }
-+ /* DMA is used */
-+ rstat = info->ioport[REG_STATUS];
-+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
-+ DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
-+ }
-+
-+ if (rstat & SER_ERROR_MASK) {
-+ unsigned char data;
-+
-+ info->last_rx_active_usec = GET_JIFFIES_USEC();
-+ info->last_rx_active = jiffies;
-+ /* If we got an error, we must reset it by reading the
-+ * data_in field
-+ */
-+ data = info->ioport[REG_DATA];
-+ DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data));
-+ DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat));
-+ if (!data && (rstat & SER_FRAMING_ERR_MASK)) {
-+ /* Most likely a break, but we get interrupts over and
-+ * over again.
-+ */
-+
-+ if (!info->break_detected_cnt) {
-+ DEBUG_LOG(info->line, "#BRK start\n", 0);
-+ }
-+ if (rstat & SER_RXD_MASK) {
-+ /* The RX pin is high now, so the break
-+ * must be over, but....
-+ * we can't really know if we will get another
-+ * last byte ending the break or not.
-+ * And we don't know if the byte (if any) will
-+ * have an error or look valid.
-+ */
-+ DEBUG_LOG(info->line, "# BL BRK\n", 0);
-+ info->errorcode = ERRCODE_INSERT_BREAK;
-+ }
-+ info->break_detected_cnt++;
-+ } else {
-+ /* The error does not look like a break, but could be
-+ * the end of one
-+ */
-+ if (info->break_detected_cnt) {
-+ DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
-+ info->errorcode = ERRCODE_INSERT_BREAK;
-+ } else {
-+ if (info->errorcode == ERRCODE_INSERT_BREAK) {
-+ info->icount.brk++;
-+ add_char_and_flag(info, '\0', TTY_BREAK);
-+ }
-+
-+ if (rstat & SER_PAR_ERR_MASK) {
-+ info->icount.parity++;
-+ add_char_and_flag(info, data, TTY_PARITY);
-+ } else if (rstat & SER_OVERRUN_MASK) {
-+ info->icount.overrun++;
-+ add_char_and_flag(info, data, TTY_OVERRUN);
-+ } else if (rstat & SER_FRAMING_ERR_MASK) {
-+ info->icount.frame++;
-+ add_char_and_flag(info, data, TTY_FRAME);
-+ }
-+
-+ info->errorcode = 0;
-+ }
-+ info->break_detected_cnt = 0;
-+ DEBUG_LOG(info->line, "#iERR s d %04X\n",
-+ ((rstat & SER_ERROR_MASK) << 8) | data);
-+ }
-+ PROCSTAT(ser_stat[info->line].early_errors_cnt++);
-+ } else { /* It was a valid byte, now let the DMA do the rest */
-+ unsigned long curr_time_u = GET_JIFFIES_USEC();
-+ unsigned long curr_time = jiffies;
-+
-+ if (info->break_detected_cnt) {
-+ /* Detect if this character is a new valid char or the
-+ * last char in a break sequence: If LSBits are 0 and
-+ * MSBits are high AND the time is close to the
-+ * previous interrupt we should discard it.
-+ */
-+ long elapsed_usec =
-+ (curr_time - info->last_rx_active) * (1000000/HZ) +
-+ curr_time_u - info->last_rx_active_usec;
-+ if (elapsed_usec < 2*info->char_time_usec) {
-+ DEBUG_LOG(info->line, "FBRK %i\n", info->line);
-+ /* Report as BREAK (error) and let
-+ * receive_chars_dma() handle it
-+ */
-+ info->errorcode = ERRCODE_SET_BREAK;
-+ } else {
-+ DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line);
-+ }
-+ DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt);
-+ }
-+
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("** OK, disabling ser_interrupts\n");
-+#endif
-+ e100_disable_serial_data_irq(info);
-+ DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line));
-+ info->break_detected_cnt = 0;
-+
-+ PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++);
-+ }
-+ /* Restarting the DMA never hurts */
-+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
-+ START_FLUSH_FAST_TIMER(info, "ser_int");
-+ return info;
-+} /* handle_ser_rx_interrupt */
-+
-+static void handle_ser_tx_interrupt(struct e100_serial *info)
-+{
-+ unsigned long flags;
-+
-+ if (info->x_char) {
-+ unsigned char rstat;
-+ DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
-+ local_irq_save(flags);
-+ rstat = info->ioport[REG_STATUS];
-+ DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
-+
-+ info->ioport[REG_TR_DATA] = info->x_char;
-+ info->icount.tx++;
-+ info->x_char = 0;
-+ /* We must enable since it is disabled in ser_interrupt */
-+ e100_enable_serial_tx_ready_irq(info);
-+ local_irq_restore(flags);
-+ return;
-+ }
-+ if (info->uses_dma_out) {
-+ unsigned char rstat;
-+ int i;
-+ /* We only use normal tx interrupt when sending x_char */
-+ DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
-+ local_irq_save(flags);
-+ rstat = info->ioport[REG_STATUS];
-+ DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
-+ e100_disable_serial_tx_ready_irq(info);
-+ if (info->port.tty->stopped)
-+ rs_stop(info->port.tty);
-+ /* Enable the DMA channel and tell it to continue */
-+ e100_enable_txdma_channel(info);
-+ /* Wait 12 cycles before doing the DMA command */
-+ for(i = 6; i > 0; i--)
-+ nop();
-+
-+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue);
-+ local_irq_restore(flags);
-+ return;
-+ }
-+ /* Normal char-by-char interrupt */
-+ if (info->xmit.head == info->xmit.tail
-+ || info->port.tty->stopped
-+ || info->port.tty->hw_stopped) {
-+ DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n",
-+ info->port.tty->stopped));
-+ e100_disable_serial_tx_ready_irq(info);
-+ info->tr_running = 0;
-+ return;
-+ }
-+ DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
-+ /* Send a byte, rs485 timing is critical so turn of ints */
-+ local_irq_save(flags);
-+ info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
-+ info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
-+ info->icount.tx++;
-+ if (info->xmit.head == info->xmit.tail) {
-+#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
-+ if (info->rs485.flags & SER_RS485_ENABLED) {
-+ /* Set a short timer to toggle RTS */
-+ start_one_shot_timer(&fast_timers_rs485[info->line],
-+ rs485_toggle_rts_timer_function,
-+ (unsigned long)info,
-+ info->char_time_usec*2,
-+ "RS-485");
-+ }
-+#endif /* RS485 */
-+ info->last_tx_active_usec = GET_JIFFIES_USEC();
-+ info->last_tx_active = jiffies;
-+ e100_disable_serial_tx_ready_irq(info);
-+ info->tr_running = 0;
-+ DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0));
-+ } else {
-+ /* We must enable since it is disabled in ser_interrupt */
-+ e100_enable_serial_tx_ready_irq(info);
-+ }
-+ local_irq_restore(flags);
-+
-+ if (CIRC_CNT(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
-+ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-+
-+} /* handle_ser_tx_interrupt */
-+
-+/* result of time measurements:
-+ * RX duration 54-60 us when doing something, otherwise 6-9 us
-+ * ser_int duration: just sending: 8-15 us normally, up to 73 us
-+ */
-+static irqreturn_t
-+ser_interrupt(int irq, void *dev_id)
-+{
-+ static volatile int tx_started = 0;
-+ struct e100_serial *info;
-+ int i;
-+ unsigned long flags;
-+ unsigned long irq_mask1_rd;
-+ unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */
-+ int handled = 0;
-+ static volatile unsigned long reentered_ready_mask = 0;
-+
-+ local_irq_save(flags);
-+ irq_mask1_rd = *R_IRQ_MASK1_RD;
-+ /* First handle all rx interrupts with ints disabled */
-+ info = rs_table;
-+ irq_mask1_rd &= e100_ser_int_mask;
-+ for (i = 0; i < NR_PORTS; i++) {
-+ /* Which line caused the data irq? */
-+ if (irq_mask1_rd & data_mask) {
-+ handled = 1;
-+ handle_ser_rx_interrupt(info);
-+ }
-+ info += 1;
-+ data_mask <<= 2;
-+ }
-+ /* Handle tx interrupts with interrupts enabled so we
-+ * can take care of new data interrupts while transmitting
-+ * We protect the tx part with the tx_started flag.
-+ * We disable the tr_ready interrupts we are about to handle and
-+ * unblock the serial interrupt so new serial interrupts may come.
-+ *
-+ * If we get a new interrupt:
-+ * - it migth be due to synchronous serial ports.
-+ * - serial irq will be blocked by general irq handler.
-+ * - async data will be handled above (sync will be ignored).
-+ * - tx_started flag will prevent us from trying to send again and
-+ * we will exit fast - no need to unblock serial irq.
-+ * - Next (sync) serial interrupt handler will be runned with
-+ * disabled interrupt due to restore_flags() at end of function,
-+ * so sync handler will not be preempted or reentered.
-+ */
-+ if (!tx_started) {
-+ unsigned long ready_mask;
-+ unsigned long
-+ tx_started = 1;
-+ /* Only the tr_ready interrupts left */
-+ irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) |
-+ IO_MASK(R_IRQ_MASK1_RD, ser1_ready) |
-+ IO_MASK(R_IRQ_MASK1_RD, ser2_ready) |
-+ IO_MASK(R_IRQ_MASK1_RD, ser3_ready));
-+ while (irq_mask1_rd) {
-+ /* Disable those we are about to handle */
-+ *R_IRQ_MASK1_CLR = irq_mask1_rd;
-+ /* Unblock the serial interrupt */
-+ *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
-+
-+ local_irq_enable();
-+ ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */
-+ info = rs_table;
-+ for (i = 0; i < NR_PORTS; i++) {
-+ /* Which line caused the ready irq? */
-+ if (irq_mask1_rd & ready_mask) {
-+ handled = 1;
-+ handle_ser_tx_interrupt(info);
-+ }
-+ info += 1;
-+ ready_mask <<= 2;
-+ }
-+ /* handle_ser_tx_interrupt enables tr_ready interrupts */
-+ local_irq_disable();
-+ /* Handle reentered TX interrupt */
-+ irq_mask1_rd = reentered_ready_mask;
-+ }
-+ local_irq_disable();
-+ tx_started = 0;
-+ } else {
-+ unsigned long ready_mask;
-+ ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) |
-+ IO_MASK(R_IRQ_MASK1_RD, ser1_ready) |
-+ IO_MASK(R_IRQ_MASK1_RD, ser2_ready) |
-+ IO_MASK(R_IRQ_MASK1_RD, ser3_ready));
-+ if (ready_mask) {
-+ reentered_ready_mask |= ready_mask;
-+ /* Disable those we are about to handle */
-+ *R_IRQ_MASK1_CLR = ready_mask;
-+ DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask));
-+ }
-+ }
-+
-+ local_irq_restore(flags);
-+ return IRQ_RETVAL(handled);
-+} /* ser_interrupt */
-+#endif
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * Here ends the serial interrupt routines.
-+ * -------------------------------------------------------------------
-+ */
-+
-+/*
-+ * This routine is used to handle the "bottom half" processing for the
-+ * serial driver, known also the "software interrupt" processing.
-+ * This processing is done at the kernel interrupt level, after the
-+ * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
-+ * is where time-consuming activities which can not be done in the
-+ * interrupt driver proper are done; the interrupt driver schedules
-+ * them using rs_sched_event(), and they get done here.
-+ */
-+static void
-+do_softint(struct work_struct *work)
-+{
-+ struct e100_serial *info;
-+ struct tty_struct *tty;
-+
-+ info = container_of(work, struct e100_serial, work);
-+
-+ tty = info->port.tty;
-+ if (!tty)
-+ return;
-+
-+ if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
-+ tty_wakeup(tty);
-+}
-+
-+static int
-+startup(struct e100_serial * info)
-+{
-+ unsigned long flags;
-+ unsigned long xmit_page;
-+ int i;
-+
-+ xmit_page = get_zeroed_page(GFP_KERNEL);
-+ if (!xmit_page)
-+ return -ENOMEM;
-+
-+ local_irq_save(flags);
-+
-+ /* if it was already initialized, skip this */
-+
-+ if (info->flags & ASYNC_INITIALIZED) {
-+ local_irq_restore(flags);
-+ free_page(xmit_page);
-+ return 0;
-+ }
-+
-+ if (info->xmit.buf)
-+ free_page(xmit_page);
-+ else
-+ info->xmit.buf = (unsigned char *) xmit_page;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf);
-+#endif
-+
-+#ifdef CONFIG_SVINTO_SIM
-+ /* Bits and pieces collected from below. Better to have them
-+ in one ifdef:ed clause than to mix in a lot of ifdefs,
-+ right? */
-+ if (info->port.tty)
-+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-+
-+ info->xmit.head = info->xmit.tail = 0;
-+ info->first_recv_buffer = info->last_recv_buffer = NULL;
-+ info->recv_cnt = info->max_recv_cnt = 0;
-+
-+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
-+ info->rec_descr[i].buf = NULL;
-+
-+ /* No real action in the simulator, but may set info important
-+ to ioctl. */
-+ change_speed(info);
-+#else
-+
-+ /*
-+ * Clear the FIFO buffers and disable them
-+ * (they will be reenabled in change_speed())
-+ */
-+
-+ /*
-+ * Reset the DMA channels and make sure their interrupts are cleared
-+ */
-+
-+ if (info->dma_in_enabled) {
-+ info->uses_dma_in = 1;
-+ e100_enable_rxdma_channel(info);
-+
-+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+
-+ /* Wait until reset cycle is complete */
-+ while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) ==
-+ IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
-+
-+ /* Make sure the irqs are cleared */
-+ *info->iclrintradr =
-+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
-+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
-+ } else {
-+ e100_disable_rxdma_channel(info);
-+ }
-+
-+ if (info->dma_out_enabled) {
-+ info->uses_dma_out = 1;
-+ e100_enable_txdma_channel(info);
-+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+
-+ while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) ==
-+ IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
-+
-+ /* Make sure the irqs are cleared */
-+ *info->oclrintradr =
-+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
-+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
-+ } else {
-+ e100_disable_txdma_channel(info);
-+ }
-+
-+ if (info->port.tty)
-+ clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-+
-+ info->xmit.head = info->xmit.tail = 0;
-+ info->first_recv_buffer = info->last_recv_buffer = NULL;
-+ info->recv_cnt = info->max_recv_cnt = 0;
-+
-+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
-+ info->rec_descr[i].buf = 0;
-+
-+ /*
-+ * and set the speed and other flags of the serial port
-+ * this will start the rx/tx as well
-+ */
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+ e100_enable_serial_data_irq(info);
-+#endif
-+ change_speed(info);
-+
-+ /* dummy read to reset any serial errors */
-+
-+ (void)info->ioport[REG_DATA];
-+
-+ /* enable the interrupts */
-+ if (info->uses_dma_out)
-+ e100_enable_txdma_irq(info);
-+
-+ e100_enable_rx_irq(info);
-+
-+ info->tr_running = 0; /* to be sure we don't lock up the transmitter */
-+
-+ /* setup the dma input descriptor and start dma */
-+
-+ start_receive(info);
-+
-+ /* for safety, make sure the descriptors last result is 0 bytes written */
-+
-+ info->tr_descr.sw_len = 0;
-+ info->tr_descr.hw_len = 0;
-+ info->tr_descr.status = 0;
-+
-+ /* enable RTS/DTR last */
-+
-+ e100_rts(info, 1);
-+ e100_dtr(info, 1);
-+
-+#endif /* CONFIG_SVINTO_SIM */
-+
-+ info->flags |= ASYNC_INITIALIZED;
-+
-+ local_irq_restore(flags);
-+ return 0;
-+}
-+
-+/*
-+ * This routine will shutdown a serial port; interrupts are disabled, and
-+ * DTR is dropped if the hangup on close termio flag is on.
-+ */
-+static void
-+shutdown(struct e100_serial * info)
-+{
-+ unsigned long flags;
-+ struct etrax_dma_descr *descr = info->rec_descr;
-+ struct etrax_recv_buffer *buffer;
-+ int i;
-+
-+#ifndef CONFIG_SVINTO_SIM
-+ /* shut down the transmitter and receiver */
-+ DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
-+ e100_disable_rx(info);
-+ info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
-+
-+ /* disable interrupts, reset dma channels */
-+ if (info->uses_dma_in) {
-+ e100_disable_rxdma_irq(info);
-+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+ info->uses_dma_in = 0;
-+ } else {
-+ e100_disable_serial_data_irq(info);
-+ }
-+
-+ if (info->uses_dma_out) {
-+ e100_disable_txdma_irq(info);
-+ info->tr_running = 0;
-+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
-+ info->uses_dma_out = 0;
-+ } else {
-+ e100_disable_serial_tx_ready_irq(info);
-+ info->tr_running = 0;
-+ }
-+
-+#endif /* CONFIG_SVINTO_SIM */
-+
-+ if (!(info->flags & ASYNC_INITIALIZED))
-+ return;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("Shutting down serial port %d (irq %d)....\n", info->line,
-+ info->irq);
-+#endif
-+
-+ local_irq_save(flags);
-+
-+ if (info->xmit.buf) {
-+ free_page((unsigned long)info->xmit.buf);
-+ info->xmit.buf = NULL;
-+ }
-+
-+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
-+ if (descr[i].buf) {
-+ buffer = phys_to_virt(descr[i].buf) - sizeof *buffer;
-+ kfree(buffer);
-+ descr[i].buf = 0;
-+ }
-+
-+ if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
-+ /* hang up DTR and RTS if HUPCL is enabled */
-+ e100_dtr(info, 0);
-+ e100_rts(info, 0); /* could check CRTSCTS before doing this */
-+ }
-+
-+ if (info->port.tty)
-+ set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-+
-+ info->flags &= ~ASYNC_INITIALIZED;
-+ local_irq_restore(flags);
-+}
-+
-+
-+/* change baud rate and other assorted parameters */
-+
-+static void
-+change_speed(struct e100_serial *info)
-+{
-+ unsigned int cflag;
-+ unsigned long xoff;
-+ unsigned long flags;
-+ /* first some safety checks */
-+
-+ if (!info->port.tty || !info->port.tty->termios)
-+ return;
-+ if (!info->ioport)
-+ return;
-+
-+ cflag = info->port.tty->termios->c_cflag;
-+
-+ /* possibly, the tx/rx should be disabled first to do this safely */
-+
-+ /* change baud-rate and write it to the hardware */
-+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) {
-+ /* Special baudrate */
-+ u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
-+ unsigned long alt_source =
-+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) |
-+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
-+ /* R_ALT_SER_BAUDRATE selects the source */
-+ DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n",
-+ (unsigned long)info->baud_base, info->custom_divisor));
-+ if (info->baud_base == SERIAL_PRESCALE_BASE) {
-+ /* 0, 2-65535 (0=65536) */
-+ u16 divisor = info->custom_divisor;
-+ /* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */
-+ /* baudrate is 3.125MHz/custom_divisor */
-+ alt_source =
-+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) |
-+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale);
-+ alt_source = 0x11;
-+ DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor));
-+ *R_SERIAL_PRESCALE = divisor;
-+ info->baud = SERIAL_PRESCALE_BASE/divisor;
-+ }
-+#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED
-+ else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 &&
-+ info->custom_divisor == 1) ||
-+ (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ &&
-+ info->custom_divisor == 8)) {
-+ /* ext_clk selected */
-+ alt_source =
-+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) |
-+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern);
-+ DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8));
-+ info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8;
-+ }
-+#endif
-+ else
-+ {
-+ /* Bad baudbase, we don't support using timer0
-+ * for baudrate.
-+ */
-+ printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n",
-+ (unsigned long)info->baud_base, info->custom_divisor);
-+ }
-+ r_alt_ser_baudrate_shadow &= ~mask;
-+ r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
-+ *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
-+ } else {
-+ /* Normal baudrate */
-+ /* Make sure we use normal baudrate */
-+ u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
-+ unsigned long alt_source =
-+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) |
-+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
-+ r_alt_ser_baudrate_shadow &= ~mask;
-+ r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
-+#ifndef CONFIG_SVINTO_SIM
-+ *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
-+#endif /* CONFIG_SVINTO_SIM */
-+
-+ info->baud = cflag_to_baud(cflag);
-+#ifndef CONFIG_SVINTO_SIM
-+ info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag);
-+#endif /* CONFIG_SVINTO_SIM */
-+ }
-+
-+#ifndef CONFIG_SVINTO_SIM
-+ /* start with default settings and then fill in changes */
-+ local_irq_save(flags);
-+ /* 8 bit, no/even parity */
-+ info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) |
-+ IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) |
-+ IO_MASK(R_SERIAL0_REC_CTRL, rec_par));
-+
-+ /* 8 bit, no/even parity, 1 stop bit, no cts */
-+ info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) |
-+ IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) |
-+ IO_MASK(R_SERIAL0_TR_CTRL, tr_par) |
-+ IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) |
-+ IO_MASK(R_SERIAL0_TR_CTRL, auto_cts));
-+
-+ if ((cflag & CSIZE) == CS7) {
-+ /* set 7 bit mode */
-+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit);
-+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit);
-+ }
-+
-+ if (cflag & CSTOPB) {
-+ /* set 2 stop bit mode */
-+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits);
-+ }
-+
-+ if (cflag & PARENB) {
-+ /* enable parity */
-+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
-+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
-+ }
-+
-+ if (cflag & CMSPAR) {
-+ /* enable stick parity, PARODD mean Mark which matches ETRAX */
-+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick);
-+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick);
-+ }
-+ if (cflag & PARODD) {
-+ /* set odd parity (or Mark if CMSPAR) */
-+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd);
-+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd);
-+ }
-+
-+ if (cflag & CRTSCTS) {
-+ /* enable automatic CTS handling */
-+ DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0));
-+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active);
-+ }
-+
-+ /* make sure the tx and rx are enabled */
-+
-+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable);
-+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable);
-+
-+ /* actually write the control regs to the hardware */
-+
-+ info->ioport[REG_TR_CTRL] = info->tx_ctrl;
-+ info->ioport[REG_REC_CTRL] = info->rx_ctrl;
-+ xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty));
-+ xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
-+ if (info->port.tty->termios->c_iflag & IXON ) {
-+ DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n",
-+ STOP_CHAR(info->port.tty)));
-+ xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
-+ }
-+
-+ *((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
-+ local_irq_restore(flags);
-+#endif /* !CONFIG_SVINTO_SIM */
-+
-+ update_char_time(info);
-+
-+} /* change_speed */
-+
-+/* start transmitting chars NOW */
-+
-+static void
-+rs_flush_chars(struct tty_struct *tty)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (info->tr_running ||
-+ info->xmit.head == info->xmit.tail ||
-+ tty->stopped ||
-+ tty->hw_stopped ||
-+ !info->xmit.buf)
-+ return;
-+
-+#ifdef SERIAL_DEBUG_FLOW
-+ printk("rs_flush_chars\n");
-+#endif
-+
-+ /* this protection might not exactly be necessary here */
-+
-+ local_irq_save(flags);
-+ start_transmit(info);
-+ local_irq_restore(flags);
-+}
-+
-+static int rs_raw_write(struct tty_struct *tty,
-+ const unsigned char *buf, int count)
-+{
-+ int c, ret = 0;
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ unsigned long flags;
-+
-+ /* first some sanity checks */
-+
-+ if (!tty || !info->xmit.buf || !tmp_buf)
-+ return 0;
-+
-+#ifdef SERIAL_DEBUG_DATA
-+ if (info->line == SERIAL_DEBUG_LINE)
-+ printk("rs_raw_write (%d), status %d\n",
-+ count, info->ioport[REG_STATUS]);
-+#endif
-+
-+#ifdef CONFIG_SVINTO_SIM
-+ /* Really simple. The output is here and now. */
-+ SIMCOUT(buf, count);
-+ return count;
-+#endif
-+ local_save_flags(flags);
-+ DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
-+ DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
-+
-+
-+ /* The local_irq_disable/restore_flags pairs below are needed
-+ * because the DMA interrupt handler moves the info->xmit values.
-+ * the memcpy needs to be in the critical region unfortunately,
-+ * because we need to read xmit values, memcpy, write xmit values
-+ * in one atomic operation... this could perhaps be avoided by
-+ * more clever design.
-+ */
-+ local_irq_disable();
-+ while (count) {
-+ c = CIRC_SPACE_TO_END(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE);
-+
-+ if (count < c)
-+ c = count;
-+ if (c <= 0)
-+ break;
-+
-+ memcpy(info->xmit.buf + info->xmit.head, buf, c);
-+ info->xmit.head = (info->xmit.head + c) &
-+ (SERIAL_XMIT_SIZE-1);
-+ buf += c;
-+ count -= c;
-+ ret += c;
-+ }
-+ local_irq_restore(flags);
-+
-+ /* enable transmitter if not running, unless the tty is stopped
-+ * this does not need IRQ protection since if tr_running == 0
-+ * the IRQ's are not running anyway for this port.
-+ */
-+ DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret));
-+
-+ if (info->xmit.head != info->xmit.tail &&
-+ !tty->stopped &&
-+ !tty->hw_stopped &&
-+ !info->tr_running) {
-+ start_transmit(info);
-+ }
-+
-+ return ret;
-+} /* raw_raw_write() */
-+
-+static int
-+rs_write(struct tty_struct *tty,
-+ const unsigned char *buf, int count)
-+{
-+#if defined(CONFIG_ETRAX_RS485)
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+
-+ if (info->rs485.flags & SER_RS485_ENABLED)
-+ {
-+ /* If we are in RS-485 mode, we need to toggle RTS and disable
-+ * the receiver before initiating a DMA transfer
-+ */
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+ /* Abort any started timer */
-+ fast_timers_rs485[info->line].function = NULL;
-+ del_fast_timer(&fast_timers_rs485[info->line]);
-+#endif
-+ e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND));
-+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
-+ e100_disable_rx(info);
-+ e100_enable_rx_irq(info);
-+#endif
-+
-+ if (info->rs485.delay_rts_before_send > 0)
-+ msleep(info->rs485.delay_rts_before_send);
-+ }
-+#endif /* CONFIG_ETRAX_RS485 */
-+
-+ count = rs_raw_write(tty, buf, count);
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+ if (info->rs485.flags & SER_RS485_ENABLED)
-+ {
-+ unsigned int val;
-+ /* If we are in RS-485 mode the following has to be done:
-+ * wait until DMA is ready
-+ * wait on transmit shift register
-+ * toggle RTS
-+ * enable the receiver
-+ */
-+
-+ /* Sleep until all sent */
-+ tty_wait_until_sent(tty, 0);
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+ /* Now sleep a little more so that shift register is empty */
-+ schedule_usleep(info->char_time_usec * 2);
-+#endif
-+ /* wait on transmit shift register */
-+ do{
-+ get_lsr_info(info, &val);
-+ }while (!(val & TIOCSER_TEMT));
-+
-+ e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
-+
-+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
-+ e100_enable_rx(info);
-+ e100_enable_rxdma_irq(info);
-+#endif
-+ }
-+#endif /* CONFIG_ETRAX_RS485 */
-+
-+ return count;
-+} /* rs_write */
-+
-+
-+/* how much space is available in the xmit buffer? */
-+
-+static int
-+rs_write_room(struct tty_struct *tty)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+
-+ return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+}
-+
-+/* How many chars are in the xmit buffer?
-+ * This does not include any chars in the transmitter FIFO.
-+ * Use wait_until_sent for waiting for FIFO drain.
-+ */
-+
-+static int
-+rs_chars_in_buffer(struct tty_struct *tty)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+
-+ return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+}
-+
-+/* discard everything in the xmit buffer */
-+
-+static void
-+rs_flush_buffer(struct tty_struct *tty)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ info->xmit.head = info->xmit.tail = 0;
-+ local_irq_restore(flags);
-+
-+ tty_wakeup(tty);
-+}
-+
-+/*
-+ * This function is used to send a high-priority XON/XOFF character to
-+ * the device
-+ *
-+ * Since we use DMA we don't check for info->x_char in transmit_chars_dma(),
-+ * but we do it in handle_ser_tx_interrupt().
-+ * We disable DMA channel and enable tx ready interrupt and write the
-+ * character when possible.
-+ */
-+static void rs_send_xchar(struct tty_struct *tty, char ch)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ unsigned long flags;
-+ local_irq_save(flags);
-+ if (info->uses_dma_out) {
-+ /* Put the DMA on hold and disable the channel */
-+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold);
-+ while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) !=
-+ IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold));
-+ e100_disable_txdma_channel(info);
-+ }
-+
-+ /* Must make sure transmitter is not stopped before we can transmit */
-+ if (tty->stopped)
-+ rs_start(tty);
-+
-+ /* Enable manual transmit interrupt and send from there */
-+ DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch));
-+ info->x_char = ch;
-+ e100_enable_serial_tx_ready_irq(info);
-+ local_irq_restore(flags);
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_throttle()
-+ *
-+ * This routine is called by the upper-layer tty layer to signal that
-+ * incoming characters should be throttled.
-+ * ------------------------------------------------------------
-+ */
-+static void
-+rs_throttle(struct tty_struct * tty)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+#ifdef SERIAL_DEBUG_THROTTLE
-+ char buf[64];
-+
-+ printk("throttle %s: %lu....\n", tty_name(tty, buf),
-+ (unsigned long)tty->ldisc.chars_in_buffer(tty));
-+#endif
-+ DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
-+
-+ /* Do RTS before XOFF since XOFF might take some time */
-+ if (tty->termios->c_cflag & CRTSCTS) {
-+ /* Turn off RTS line */
-+ e100_rts(info, 0);
-+ }
-+ if (I_IXOFF(tty))
-+ rs_send_xchar(tty, STOP_CHAR(tty));
-+
-+}
-+
-+static void
-+rs_unthrottle(struct tty_struct * tty)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+#ifdef SERIAL_DEBUG_THROTTLE
-+ char buf[64];
-+
-+ printk("unthrottle %s: %lu....\n", tty_name(tty, buf),
-+ (unsigned long)tty->ldisc.chars_in_buffer(tty));
-+#endif
-+ DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
-+ DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count));
-+ /* Do RTS before XOFF since XOFF might take some time */
-+ if (tty->termios->c_cflag & CRTSCTS) {
-+ /* Assert RTS line */
-+ e100_rts(info, 1);
-+ }
-+
-+ if (I_IXOFF(tty)) {
-+ if (info->x_char)
-+ info->x_char = 0;
-+ else
-+ rs_send_xchar(tty, START_CHAR(tty));
-+ }
-+
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_ioctl() and friends
-+ * ------------------------------------------------------------
-+ */
-+
-+static int
-+get_serial_info(struct e100_serial * info,
-+ struct serial_struct * retinfo)
-+{
-+ struct serial_struct tmp;
-+
-+ /* this is all probably wrong, there are a lot of fields
-+ * here that we don't have in e100_serial and maybe we
-+ * should set them to something else than 0.
-+ */
-+
-+ if (!retinfo)
-+ return -EFAULT;
-+ memset(&tmp, 0, sizeof(tmp));
-+ tmp.type = info->type;
-+ tmp.line = info->line;
-+ tmp.port = (int)info->ioport;
-+ tmp.irq = info->irq;
-+ tmp.flags = info->flags;
-+ tmp.baud_base = info->baud_base;
-+ tmp.close_delay = info->close_delay;
-+ tmp.closing_wait = info->closing_wait;
-+ tmp.custom_divisor = info->custom_divisor;
-+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+static int
-+set_serial_info(struct e100_serial *info,
-+ struct serial_struct *new_info)
-+{
-+ struct serial_struct new_serial;
-+ struct e100_serial old_info;
-+ int retval = 0;
-+
-+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
-+ return -EFAULT;
-+
-+ old_info = *info;
-+
-+ if (!capable(CAP_SYS_ADMIN)) {
-+ if ((new_serial.type != info->type) ||
-+ (new_serial.close_delay != info->close_delay) ||
-+ ((new_serial.flags & ~ASYNC_USR_MASK) !=
-+ (info->flags & ~ASYNC_USR_MASK)))
-+ return -EPERM;
-+ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
-+ (new_serial.flags & ASYNC_USR_MASK));
-+ goto check_and_exit;
-+ }
-+
-+ if (info->count > 1)
-+ return -EBUSY;
-+
-+ /*
-+ * OK, past this point, all the error checking has been done.
-+ * At this point, we start making changes.....
-+ */
-+
-+ info->baud_base = new_serial.baud_base;
-+ info->flags = ((info->flags & ~ASYNC_FLAGS) |
-+ (new_serial.flags & ASYNC_FLAGS));
-+ info->custom_divisor = new_serial.custom_divisor;
-+ info->type = new_serial.type;
-+ info->close_delay = new_serial.close_delay;
-+ info->closing_wait = new_serial.closing_wait;
-+ info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-+
-+ check_and_exit:
-+ if (info->flags & ASYNC_INITIALIZED) {
-+ change_speed(info);
-+ } else
-+ retval = startup(info);
-+ return retval;
-+}
-+
-+/*
-+ * get_lsr_info - get line status register info
-+ *
-+ * Purpose: Let user call ioctl() to get info when the UART physically
-+ * is emptied. On bus types like RS485, the transmitter must
-+ * release the bus after transmitting. This must be done when
-+ * the transmit shift register is empty, not be done when the
-+ * transmit holding register is empty. This functionality
-+ * allows an RS485 driver to be written in user space.
-+ */
-+static int
-+get_lsr_info(struct e100_serial * info, unsigned int *value)
-+{
-+ unsigned int result = TIOCSER_TEMT;
-+#ifndef CONFIG_SVINTO_SIM
-+ unsigned long curr_time = jiffies;
-+ unsigned long curr_time_usec = GET_JIFFIES_USEC();
-+ unsigned long elapsed_usec =
-+ (curr_time - info->last_tx_active) * 1000000/HZ +
-+ curr_time_usec - info->last_tx_active_usec;
-+
-+ if (info->xmit.head != info->xmit.tail ||
-+ elapsed_usec < 2*info->char_time_usec) {
-+ result = 0;
-+ }
-+#endif
-+
-+ if (copy_to_user(value, &result, sizeof(int)))
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+#ifdef SERIAL_DEBUG_IO
-+struct state_str
-+{
-+ int state;
-+ const char *str;
-+};
-+
-+const struct state_str control_state_str[] = {
-+ {TIOCM_DTR, "DTR" },
-+ {TIOCM_RTS, "RTS"},
-+ {TIOCM_ST, "ST?" },
-+ {TIOCM_SR, "SR?" },
-+ {TIOCM_CTS, "CTS" },
-+ {TIOCM_CD, "CD" },
-+ {TIOCM_RI, "RI" },
-+ {TIOCM_DSR, "DSR" },
-+ {0, NULL }
-+};
-+
-+char *get_control_state_str(int MLines, char *s)
-+{
-+ int i = 0;
-+
-+ s[0]='\0';
-+ while (control_state_str[i].str != NULL) {
-+ if (MLines & control_state_str[i].state) {
-+ if (s[0] != '\0') {
-+ strcat(s, ", ");
-+ }
-+ strcat(s, control_state_str[i].str);
-+ }
-+ i++;
-+ }
-+ return s;
-+}
-+#endif
-+
-+static int
-+rs_break(struct tty_struct *tty, int break_state)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (!info->ioport)
-+ return -EIO;
-+
-+ local_irq_save(flags);
-+ if (break_state == -1) {
-+ /* Go to manual mode and set the txd pin to 0 */
-+ /* Clear bit 7 (txd) and 6 (tr_enable) */
-+ info->tx_ctrl &= 0x3F;
-+ } else {
-+ /* Set bit 7 (txd) and 6 (tr_enable) */
-+ info->tx_ctrl |= (0x80 | 0x40);
-+ }
-+ info->ioport[REG_TR_CTRL] = info->tx_ctrl;
-+ local_irq_restore(flags);
-+ return 0;
-+}
-+
-+static int
-+rs_tiocmset(struct tty_struct *tty, struct file *file,
-+ unsigned int set, unsigned int clear)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ if (clear & TIOCM_RTS)
-+ e100_rts(info, 0);
-+ if (clear & TIOCM_DTR)
-+ e100_dtr(info, 0);
-+ /* Handle FEMALE behaviour */
-+ if (clear & TIOCM_RI)
-+ e100_ri_out(info, 0);
-+ if (clear & TIOCM_CD)
-+ e100_cd_out(info, 0);
-+
-+ if (set & TIOCM_RTS)
-+ e100_rts(info, 1);
-+ if (set & TIOCM_DTR)
-+ e100_dtr(info, 1);
-+ /* Handle FEMALE behaviour */
-+ if (set & TIOCM_RI)
-+ e100_ri_out(info, 1);
-+ if (set & TIOCM_CD)
-+ e100_cd_out(info, 1);
-+
-+ local_irq_restore(flags);
-+ return 0;
-+}
-+
-+static int
-+rs_tiocmget(struct tty_struct *tty, struct file *file)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ unsigned int result;
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ result =
-+ (!E100_RTS_GET(info) ? TIOCM_RTS : 0)
-+ | (!E100_DTR_GET(info) ? TIOCM_DTR : 0)
-+ | (!E100_RI_GET(info) ? TIOCM_RNG : 0)
-+ | (!E100_DSR_GET(info) ? TIOCM_DSR : 0)
-+ | (!E100_CD_GET(info) ? TIOCM_CAR : 0)
-+ | (!E100_CTS_GET(info) ? TIOCM_CTS : 0);
-+
-+ local_irq_restore(flags);
-+
-+#ifdef SERIAL_DEBUG_IO
-+ printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n",
-+ info->line, result, result);
-+ {
-+ char s[100];
-+
-+ get_control_state_str(result, s);
-+ printk(KERN_DEBUG "state: %s\n", s);
-+ }
-+#endif
-+ return result;
-+
-+}
-+
-+
-+static int
-+rs_ioctl(struct tty_struct *tty, struct file * file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+
-+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
-+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
-+ if (tty->flags & (1 << TTY_IO_ERROR))
-+ return -EIO;
-+ }
-+
-+ switch (cmd) {
-+ case TIOCGSERIAL:
-+ return get_serial_info(info,
-+ (struct serial_struct *) arg);
-+ case TIOCSSERIAL:
-+ return set_serial_info(info,
-+ (struct serial_struct *) arg);
-+ case TIOCSERGETLSR: /* Get line status register */
-+ return get_lsr_info(info, (unsigned int *) arg);
-+
-+ case TIOCSERGSTRUCT:
-+ if (copy_to_user((struct e100_serial *) arg,
-+ info, sizeof(struct e100_serial)))
-+ return -EFAULT;
-+ return 0;
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+ case TIOCSERSETRS485:
-+ {
-+ /* In this ioctl we still use the old structure
-+ * rs485_control for backward compatibility
-+ * (if we use serial_rs485, then old user-level code
-+ * wouldn't work anymore...).
-+ * The use of this ioctl is deprecated: use TIOCSRS485
-+ * instead.*/
-+ struct rs485_control rs485ctrl;
-+ struct serial_rs485 rs485data;
-+ printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n");
-+ if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg,
-+ sizeof(rs485ctrl)))
-+ return -EFAULT;
-+
-+ rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
-+ rs485data.flags = 0;
-+ if (rs485ctrl.enabled)
-+ rs485data.flags |= SER_RS485_ENABLED;
-+ else
-+ rs485data.flags &= ~(SER_RS485_ENABLED);
-+
-+ if (rs485ctrl.rts_on_send)
-+ rs485data.flags |= SER_RS485_RTS_ON_SEND;
-+ else
-+ rs485data.flags &= ~(SER_RS485_RTS_ON_SEND);
-+
-+ if (rs485ctrl.rts_after_sent)
-+ rs485data.flags |= SER_RS485_RTS_AFTER_SEND;
-+ else
-+ rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND);
-+
-+ return e100_enable_rs485(tty, &rs485data);
-+ }
-+
-+ case TIOCSRS485:
-+ {
-+ /* This is the new version of TIOCSRS485, with new
-+ * data structure serial_rs485 */
-+ struct serial_rs485 rs485data;
-+ if (copy_from_user(&rs485data, (struct rs485_control *)arg,
-+ sizeof(rs485data)))
-+ return -EFAULT;
-+
-+ return e100_enable_rs485(tty, &rs485data);
-+ }
-+
-+
-+ case TIOCSERWRRS485:
-+ {
-+ struct rs485_write rs485wr;
-+ if (copy_from_user(&rs485wr, (struct rs485_write *)arg,
-+ sizeof(rs485wr)))
-+ return -EFAULT;
-+
-+ return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size);
-+ }
-+#endif
-+
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+ return 0;
-+}
-+
-+static void
-+rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-+{
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+
-+ change_speed(info);
-+
-+ /* Handle turning off CRTSCTS */
-+ if ((old_termios->c_cflag & CRTSCTS) &&
-+ !(tty->termios->c_cflag & CRTSCTS)) {
-+ tty->hw_stopped = 0;
-+ rs_start(tty);
-+ }
-+
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_close()
-+ *
-+ * This routine is called when the serial port gets closed. First, we
-+ * wait for the last remaining data to be sent. Then, we unlink its
-+ * S structure from the interrupt chain if necessary, and we free
-+ * that IRQ if nothing is left in the chain.
-+ * ------------------------------------------------------------
-+ */
-+static void
-+rs_close(struct tty_struct *tty, struct file * filp)
-+{
-+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (!info)
-+ return;
-+
-+ /* interrupts are disabled for this entire function */
-+
-+ local_irq_save(flags);
-+
-+ if (tty_hung_up_p(filp)) {
-+ local_irq_restore(flags);
-+ return;
-+ }
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("[%d] rs_close ttyS%d, count = %d\n", current->pid,
-+ info->line, info->count);
-+#endif
-+ if ((tty->count == 1) && (info->count != 1)) {
-+ /*
-+ * Uh, oh. tty->count is 1, which means that the tty
-+ * structure will be freed. Info->count should always
-+ * be one in these conditions. If it's greater than
-+ * one, we've got real problems, since it means the
-+ * serial port won't be shutdown.
-+ */
-+ printk(KERN_CRIT
-+ "rs_close: bad serial port count; tty->count is 1, "
-+ "info->count is %d\n", info->count);
-+ info->count = 1;
-+ }
-+ if (--info->count < 0) {
-+ printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n",
-+ info->line, info->count);
-+ info->count = 0;
-+ }
-+ if (info->count) {
-+ local_irq_restore(flags);
-+ return;
-+ }
-+ info->flags |= ASYNC_CLOSING;
-+ /*
-+ * Save the termios structure, since this port may have
-+ * separate termios for callout and dialin.
-+ */
-+ if (info->flags & ASYNC_NORMAL_ACTIVE)
-+ info->normal_termios = *tty->termios;
-+ /*
-+ * Now we wait for the transmit buffer to clear; and we notify
-+ * the line discipline to only process XON/XOFF characters.
-+ */
-+ tty->closing = 1;
-+ if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-+ tty_wait_until_sent(tty, info->closing_wait);
-+ /*
-+ * At this point we stop accepting input. To do this, we
-+ * disable the serial receiver and the DMA receive interrupt.
-+ */
-+#ifdef SERIAL_HANDLE_EARLY_ERRORS
-+ e100_disable_serial_data_irq(info);
-+#endif
-+
-+#ifndef CONFIG_SVINTO_SIM
-+ e100_disable_rx(info);
-+ e100_disable_rx_irq(info);
-+
-+ if (info->flags & ASYNC_INITIALIZED) {
-+ /*
-+ * Before we drop DTR, make sure the UART transmitter
-+ * has completely drained; this is especially
-+ * important as we have a transmit FIFO!
-+ */
-+ rs_wait_until_sent(tty, HZ);
-+ }
-+#endif
-+
-+ shutdown(info);
-+ rs_flush_buffer(tty);
-+ tty_ldisc_flush(tty);
-+ tty->closing = 0;
-+ info->event = 0;
-+ info->port.tty = NULL;
-+ if (info->blocked_open) {
-+ if (info->close_delay)
-+ schedule_timeout_interruptible(info->close_delay);
-+ wake_up_interruptible(&info->open_wait);
-+ }
-+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-+ wake_up_interruptible(&info->close_wait);
-+ local_irq_restore(flags);
-+
-+ /* port closed */
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+ if (info->rs485.flags & SER_RS485_ENABLED) {
-+ info->rs485.flags &= ~(SER_RS485_ENABLED);
-+#if defined(CONFIG_ETRAX_RS485_ON_PA)
-+ *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+ rs485_port_g_bit, 0);
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_LTC1387)
-+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+ CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0);
-+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
-+ CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0);
-+#endif
-+ }
-+#endif
-+
-+ /*
-+ * Release any allocated DMA irq's.
-+ */
-+ if (info->dma_in_enabled) {
-+ free_irq(info->dma_in_irq_nbr, info);
-+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
-+ info->uses_dma_in = 0;
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk(KERN_DEBUG "DMA irq '%s' freed\n",
-+ info->dma_in_irq_description);
-+#endif
-+ }
-+ if (info->dma_out_enabled) {
-+ free_irq(info->dma_out_irq_nbr, info);
-+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
-+ info->uses_dma_out = 0;
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk(KERN_DEBUG "DMA irq '%s' freed\n",
-+ info->dma_out_irq_description);
-+#endif
-+ }
-+}
-+
-+/*
-+ * rs_wait_until_sent() --- wait until the transmitter is empty
-+ */
-+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
-+{
-+ unsigned long orig_jiffies;
-+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
-+ unsigned long curr_time = jiffies;
-+ unsigned long curr_time_usec = GET_JIFFIES_USEC();
-+ long elapsed_usec =
-+ (curr_time - info->last_tx_active) * (1000000/HZ) +
-+ curr_time_usec - info->last_tx_active_usec;
-+
-+ /*
-+ * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
-+ * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
-+ */
-+ lock_kernel();
-+ orig_jiffies = jiffies;
-+ while (info->xmit.head != info->xmit.tail || /* More in send queue */
-+ (*info->ostatusadr & 0x007f) || /* more in FIFO */
-+ (elapsed_usec < 2*info->char_time_usec)) {
-+ schedule_timeout_interruptible(1);
-+ if (signal_pending(current))
-+ break;
-+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
-+ break;
-+ curr_time = jiffies;
-+ curr_time_usec = GET_JIFFIES_USEC();
-+ elapsed_usec =
-+ (curr_time - info->last_tx_active) * (1000000/HZ) +
-+ curr_time_usec - info->last_tx_active_usec;
-+ }
-+ set_current_state(TASK_RUNNING);
-+ unlock_kernel();
-+}
-+
-+/*
-+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
-+ */
-+void
-+rs_hangup(struct tty_struct *tty)
-+{
-+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+
-+ rs_flush_buffer(tty);
-+ shutdown(info);
-+ info->event = 0;
-+ info->count = 0;
-+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
-+ info->port.tty = NULL;
-+ wake_up_interruptible(&info->open_wait);
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_open() and friends
-+ * ------------------------------------------------------------
-+ */
-+static int
-+block_til_ready(struct tty_struct *tty, struct file * filp,
-+ struct e100_serial *info)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+ unsigned long flags;
-+ int retval;
-+ int do_clocal = 0, extra_count = 0;
-+
-+ /*
-+ * If the device is in the middle of being closed, then block
-+ * until it's done, and then try again.
-+ */
-+ if (tty_hung_up_p(filp) ||
-+ (info->flags & ASYNC_CLOSING)) {
-+ wait_event_interruptible(info->close_wait,
-+ !(info->flags & ASYNC_CLOSING));
-+#ifdef SERIAL_DO_RESTART
-+ if (info->flags & ASYNC_HUP_NOTIFY)
-+ return -EAGAIN;
-+ else
-+ return -ERESTARTSYS;
-+#else
-+ return -EAGAIN;
-+#endif
-+ }
-+
-+ /*
-+ * If non-blocking mode is set, or the port is not enabled,
-+ * then make the check up front and then exit.
-+ */
-+ if ((filp->f_flags & O_NONBLOCK) ||
-+ (tty->flags & (1 << TTY_IO_ERROR))) {
-+ info->flags |= ASYNC_NORMAL_ACTIVE;
-+ return 0;
-+ }
-+
-+ if (tty->termios->c_cflag & CLOCAL) {
-+ do_clocal = 1;
-+ }
-+
-+ /*
-+ * Block waiting for the carrier detect and the line to become
-+ * free (i.e., not in use by the callout). While we are in
-+ * this loop, info->count is dropped by one, so that
-+ * rs_close() knows when to free things. We restore it upon
-+ * exit, either normal or abnormal.
-+ */
-+ retval = 0;
-+ add_wait_queue(&info->open_wait, &wait);
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("block_til_ready before block: ttyS%d, count = %d\n",
-+ info->line, info->count);
-+#endif
-+ local_irq_save(flags);
-+ if (!tty_hung_up_p(filp)) {
-+ extra_count++;
-+ info->count--;
-+ }
-+ local_irq_restore(flags);
-+ info->blocked_open++;
-+ while (1) {
-+ local_irq_save(flags);
-+ /* assert RTS and DTR */
-+ e100_rts(info, 1);
-+ e100_dtr(info, 1);
-+ local_irq_restore(flags);
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ if (tty_hung_up_p(filp) ||
-+ !(info->flags & ASYNC_INITIALIZED)) {
-+#ifdef SERIAL_DO_RESTART
-+ if (info->flags & ASYNC_HUP_NOTIFY)
-+ retval = -EAGAIN;
-+ else
-+ retval = -ERESTARTSYS;
-+#else
-+ retval = -EAGAIN;
-+#endif
-+ break;
-+ }
-+ if (!(info->flags & ASYNC_CLOSING) && do_clocal)
-+ /* && (do_clocal || DCD_IS_ASSERTED) */
-+ break;
-+ if (signal_pending(current)) {
-+ retval = -ERESTARTSYS;
-+ break;
-+ }
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("block_til_ready blocking: ttyS%d, count = %d\n",
-+ info->line, info->count);
-+#endif
-+ schedule();
-+ }
-+ set_current_state(TASK_RUNNING);
-+ remove_wait_queue(&info->open_wait, &wait);
-+ if (extra_count)
-+ info->count++;
-+ info->blocked_open--;
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("block_til_ready after blocking: ttyS%d, count = %d\n",
-+ info->line, info->count);
-+#endif
-+ if (retval)
-+ return retval;
-+ info->flags |= ASYNC_NORMAL_ACTIVE;
-+ return 0;
-+}
-+
-+static void
-+deinit_port(struct e100_serial *info)
-+{
-+ if (info->dma_out_enabled) {
-+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
-+ free_irq(info->dma_out_irq_nbr, info);
-+ }
-+ if (info->dma_in_enabled) {
-+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
-+ free_irq(info->dma_in_irq_nbr, info);
-+ }
-+}
-+
-+/*
-+ * This routine is called whenever a serial port is opened.
-+ * It performs the serial-specific initialization for the tty structure.
-+ */
-+static int
-+rs_open(struct tty_struct *tty, struct file * filp)
-+{
-+ struct e100_serial *info;
-+ int retval, line;
-+ unsigned long page;
-+ int allocated_resources = 0;
-+
-+ /* find which port we want to open */
-+ line = tty->index;
-+
-+ if (line < 0 || line >= NR_PORTS)
-+ return -ENODEV;
-+
-+ /* find the corresponding e100_serial struct in the table */
-+ info = rs_table + line;
-+
-+ /* don't allow the opening of ports that are not enabled in the HW config */
-+ if (!info->enabled)
-+ return -ENODEV;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name,
-+ info->count);
-+#endif
-+
-+ info->count++;
-+ tty->driver_data = info;
-+ info->port.tty = tty;
-+
-+ info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-+
-+ if (!tmp_buf) {
-+ page = get_zeroed_page(GFP_KERNEL);
-+ if (!page) {
-+ return -ENOMEM;
-+ }
-+ if (tmp_buf)
-+ free_page(page);
-+ else
-+ tmp_buf = (unsigned char *) page;
-+ }
-+
-+ /*
-+ * If the port is in the middle of closing, bail out now
-+ */
-+ if (tty_hung_up_p(filp) ||
-+ (info->flags & ASYNC_CLOSING)) {
-+ wait_event_interruptible(info->close_wait,
-+ !(info->flags & ASYNC_CLOSING));
-+#ifdef SERIAL_DO_RESTART
-+ return ((info->flags & ASYNC_HUP_NOTIFY) ?
-+ -EAGAIN : -ERESTARTSYS);
-+#else
-+ return -EAGAIN;
-+#endif
-+ }
-+
-+ /*
-+ * If DMA is enabled try to allocate the irq's.
-+ */
-+ if (info->count == 1) {
-+ allocated_resources = 1;
-+ if (info->dma_in_enabled) {
-+ if (request_irq(info->dma_in_irq_nbr,
-+ rec_interrupt,
-+ info->dma_in_irq_flags,
-+ info->dma_in_irq_description,
-+ info)) {
-+ printk(KERN_WARNING "DMA irq '%s' busy; "
-+ "falling back to non-DMA mode\n",
-+ info->dma_in_irq_description);
-+ /* Make sure we never try to use DMA in */
-+ /* for the port again. */
-+ info->dma_in_enabled = 0;
-+ } else if (cris_request_dma(info->dma_in_nbr,
-+ info->dma_in_irq_description,
-+ DMA_VERBOSE_ON_ERROR,
-+ info->dma_owner)) {
-+ free_irq(info->dma_in_irq_nbr, info);
-+ printk(KERN_WARNING "DMA '%s' busy; "
-+ "falling back to non-DMA mode\n",
-+ info->dma_in_irq_description);
-+ /* Make sure we never try to use DMA in */
-+ /* for the port again. */
-+ info->dma_in_enabled = 0;
-+ }
-+#ifdef SERIAL_DEBUG_OPEN
-+ else
-+ printk(KERN_DEBUG "DMA irq '%s' allocated\n",
-+ info->dma_in_irq_description);
-+#endif
-+ }
-+ if (info->dma_out_enabled) {
-+ if (request_irq(info->dma_out_irq_nbr,
-+ tr_interrupt,
-+ info->dma_out_irq_flags,
-+ info->dma_out_irq_description,
-+ info)) {
-+ printk(KERN_WARNING "DMA irq '%s' busy; "
-+ "falling back to non-DMA mode\n",
-+ info->dma_out_irq_description);
-+ /* Make sure we never try to use DMA out */
-+ /* for the port again. */
-+ info->dma_out_enabled = 0;
-+ } else if (cris_request_dma(info->dma_out_nbr,
-+ info->dma_out_irq_description,
-+ DMA_VERBOSE_ON_ERROR,
-+ info->dma_owner)) {
-+ free_irq(info->dma_out_irq_nbr, info);
-+ printk(KERN_WARNING "DMA '%s' busy; "
-+ "falling back to non-DMA mode\n",
-+ info->dma_out_irq_description);
-+ /* Make sure we never try to use DMA out */
-+ /* for the port again. */
-+ info->dma_out_enabled = 0;
-+ }
-+#ifdef SERIAL_DEBUG_OPEN
-+ else
-+ printk(KERN_DEBUG "DMA irq '%s' allocated\n",
-+ info->dma_out_irq_description);
-+#endif
-+ }
-+ }
-+
-+ /*
-+ * Start up the serial port
-+ */
-+
-+ retval = startup(info);
-+ if (retval) {
-+ if (allocated_resources)
-+ deinit_port(info);
-+
-+ /* FIXME Decrease count info->count here too? */
-+ return retval;
-+ }
-+
-+
-+ retval = block_til_ready(tty, filp, info);
-+ if (retval) {
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("rs_open returning after block_til_ready with %d\n",
-+ retval);
-+#endif
-+ if (allocated_resources)
-+ deinit_port(info);
-+
-+ return retval;
-+ }
-+
-+ if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
-+ *tty->termios = info->normal_termios;
-+ change_speed(info);
-+ }
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("rs_open ttyS%d successful...\n", info->line);
-+#endif
-+ DLOG_INT_TRIG( log_int_pos = 0);
-+
-+ DFLIP( if (info->line == SERIAL_DEBUG_LINE) {
-+ info->icount.rx = 0;
-+ } );
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PROC_FS
-+/*
-+ * /proc fs routines....
-+ */
-+
-+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
-+{
-+ unsigned long tmp;
-+
-+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
-+ info->line, (unsigned long)info->ioport, info->irq);
-+
-+ if (!info->ioport || (info->type == PORT_UNKNOWN)) {
-+ seq_printf(m, "\n");
-+ return;
-+ }
-+
-+ seq_printf(m, " baud:%d", info->baud);
-+ seq_printf(m, " tx:%lu rx:%lu",
-+ (unsigned long)info->icount.tx,
-+ (unsigned long)info->icount.rx);
-+ tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+ if (tmp)
-+ seq_printf(m, " tx_pend:%lu/%lu",
-+ (unsigned long)tmp,
-+ (unsigned long)SERIAL_XMIT_SIZE);
-+
-+ seq_printf(m, " rx_pend:%lu/%lu",
-+ (unsigned long)info->recv_cnt,
-+ (unsigned long)info->max_recv_cnt);
-+
-+#if 1
-+ if (info->port.tty) {
-+ if (info->port.tty->stopped)
-+ seq_printf(m, " stopped:%i",
-+ (int)info->port.tty->stopped);
-+ if (info->port.tty->hw_stopped)
-+ seq_printf(m, " hw_stopped:%i",
-+ (int)info->port.tty->hw_stopped);
-+ }
-+
-+ {
-+ unsigned char rstat = info->ioport[REG_STATUS];
-+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
-+ seq_printf(m, " xoff_detect:1");
-+ }
-+
-+#endif
-+
-+ if (info->icount.frame)
-+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
-+
-+ if (info->icount.parity)
-+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
-+
-+ if (info->icount.brk)
-+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
-+
-+ if (info->icount.overrun)
-+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
-+
-+ /*
-+ * Last thing is the RS-232 status lines
-+ */
-+ if (!E100_RTS_GET(info))
-+ seq_puts(m, "|RTS");
-+ if (!E100_CTS_GET(info))
-+ seq_puts(m, "|CTS");
-+ if (!E100_DTR_GET(info))
-+ seq_puts(m, "|DTR");
-+ if (!E100_DSR_GET(info))
-+ seq_puts(m, "|DSR");
-+ if (!E100_CD_GET(info))
-+ seq_puts(m, "|CD");
-+ if (!E100_RI_GET(info))
-+ seq_puts(m, "|RI");
-+ seq_puts(m, "\n");
-+}
-+
-+
-+static int crisv10_proc_show(struct seq_file *m, void *v)
-+{
-+ int i;
-+
-+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
-+
-+ for (i = 0; i < NR_PORTS; i++) {
-+ if (!rs_table[i].enabled)
-+ continue;
-+ seq_line_info(m, &rs_table[i]);
-+ }
-+#ifdef DEBUG_LOG_INCLUDED
-+ for (i = 0; i < debug_log_pos; i++) {
-+ seq_printf(m, "%-4i %lu.%lu ",
-+ i, debug_log[i].time,
-+ timer_data_to_ns(debug_log[i].timer_data));
-+ seq_printf(m, debug_log[i].string, debug_log[i].value);
-+ }
-+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
-+ debug_log_pos = 0;
-+#endif
-+ return 0;
-+}
-+
-+static int crisv10_proc_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, crisv10_proc_show, NULL);
-+}
-+
-+static const struct file_operations crisv10_proc_fops = {
-+ .owner = THIS_MODULE,
-+ .open = crisv10_proc_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+#endif
-+
-+
-+/* Finally, routines used to initialize the serial driver. */
-+
-+static void show_serial_version(void)
-+{
-+ printk(KERN_INFO
-+ "ETRAX 100LX serial-driver %s, "
-+ "(c) 2000-2004 Axis Communications AB\r\n",
-+ &serial_version[11]); /* "$Revision: x.yy" */
-+}
-+
-+/* rs_init inits the driver at boot (using the module_init chain) */
-+
-+static const struct tty_operations rs_ops = {
-+ .open = rs_open,
-+ .close = rs_close,
-+ .write = rs_write,
-+ .flush_chars = rs_flush_chars,
-+ .write_room = rs_write_room,
-+ .chars_in_buffer = rs_chars_in_buffer,
-+ .flush_buffer = rs_flush_buffer,
-+ .ioctl = rs_ioctl,
-+ .throttle = rs_throttle,
-+ .unthrottle = rs_unthrottle,
-+ .set_termios = rs_set_termios,
-+ .stop = rs_stop,
-+ .start = rs_start,
-+ .hangup = rs_hangup,
-+ .break_ctl = rs_break,
-+ .send_xchar = rs_send_xchar,
-+ .wait_until_sent = rs_wait_until_sent,
-+ .tiocmget = rs_tiocmget,
-+ .tiocmset = rs_tiocmset,
-+#ifdef CONFIG_PROC_FS
-+ .proc_fops = &crisv10_proc_fops,
-+#endif
-+};
-+
-+static int __init rs_init(void)
-+{
-+ int i;
-+ struct e100_serial *info;
-+ struct tty_driver *driver = alloc_tty_driver(NR_PORTS);
-+
-+ if (!driver)
-+ return -ENOMEM;
-+
-+ show_serial_version();
-+
-+ /* Setup the timed flush handler system */
-+
-+#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER)
-+ setup_timer(&flush_timer, timed_flush_handler, 0);
-+ mod_timer(&flush_timer, jiffies + 5);
-+#endif
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+#if defined(CONFIG_ETRAX_RS485_ON_PA)
-+ if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
-+ rs485_pa_bit)) {
-+ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
-+ "RS485 pin\n");
-+ put_tty_driver(driver);
-+ return -EBUSY;
-+ }
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+ if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
-+ rs485_port_g_bit)) {
-+ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
-+ "RS485 pin\n");
-+ put_tty_driver(driver);
-+ return -EBUSY;
-+ }
-+#endif
-+#endif
-+
-+ /* Initialize the tty_driver structure */
-+
-+ driver->driver_name = "serial";
-+ driver->name = "ttyS";
-+ driver->major = TTY_MAJOR;
-+ driver->minor_start = 64;
-+ driver->type = TTY_DRIVER_TYPE_SERIAL;
-+ driver->subtype = SERIAL_TYPE_NORMAL;
-+ driver->init_termios = tty_std_termios;
-+ driver->init_termios.c_cflag =
-+ B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
-+ driver->init_termios.c_ispeed = 115200;
-+ driver->init_termios.c_ospeed = 115200;
-+ driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-+
-+ tty_set_operations(driver, &rs_ops);
-+ serial_driver = driver;
-+ if (tty_register_driver(driver))
-+ panic("Couldn't register serial driver\n");
-+ /* do some initializing for the separate ports */
-+
-+ for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
-+ if (info->enabled) {
-+ if (cris_request_io_interface(info->io_if,
-+ info->io_if_description)) {
-+ printk(KERN_CRIT "ETRAX100LX async serial: "
-+ "Could not allocate IO pins for "
-+ "%s, port %d\n",
-+ info->io_if_description, i);
-+ info->enabled = 0;
-+ }
-+ }
-+ info->uses_dma_in = 0;
-+ info->uses_dma_out = 0;
-+ info->line = i;
-+ info->port.tty = NULL;
-+ info->type = PORT_ETRAX;
-+ info->tr_running = 0;
-+ info->forced_eop = 0;
-+ info->baud_base = DEF_BAUD_BASE;
-+ info->custom_divisor = 0;
-+ info->flags = 0;
-+ info->close_delay = 5*HZ/10;
-+ info->closing_wait = 30*HZ;
-+ info->x_char = 0;
-+ info->event = 0;
-+ info->count = 0;
-+ info->blocked_open = 0;
-+ info->normal_termios = driver->init_termios;
-+ init_waitqueue_head(&info->open_wait);
-+ init_waitqueue_head(&info->close_wait);
-+ info->xmit.buf = NULL;
-+ info->xmit.tail = info->xmit.head = 0;
-+ info->first_recv_buffer = info->last_recv_buffer = NULL;
-+ info->recv_cnt = info->max_recv_cnt = 0;
-+ info->last_tx_active_usec = 0;
-+ info->last_tx_active = 0;
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+ /* Set sane defaults */
-+ info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
-+ info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
-+ info->rs485.delay_rts_before_send = 0;
-+ info->rs485.flags &= ~(SER_RS485_ENABLED);
-+#endif
-+ INIT_WORK(&info->work, do_softint);
-+
-+ if (info->enabled) {
-+ printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
-+ serial_driver->name, info->line, (unsigned int)info->ioport);
-+ }
-+ }
-+#ifdef CONFIG_ETRAX_FAST_TIMER
-+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
-+ memset(fast_timers, 0, sizeof(fast_timers));
-+#endif
-+#ifdef CONFIG_ETRAX_RS485
-+ memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485));
-+#endif
-+ fast_timer_init();
-+#endif
-+
-+#ifndef CONFIG_SVINTO_SIM
-+#ifndef CONFIG_ETRAX_KGDB
-+ /* Not needed in simulator. May only complicate stuff. */
-+ /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
-+
-+ if (request_irq(SERIAL_IRQ_NBR, ser_interrupt,
-+ IRQF_SHARED | IRQF_DISABLED, "serial ", driver))
-+ panic("%s: Failed to request irq8", __func__);
-+
-+#endif
-+#endif /* CONFIG_SVINTO_SIM */
-+
-+ return 0;
-+}
-+
-+/* this makes sure that rs_init is called during kernel boot */
-+
-+module_init(rs_init);
-diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.32/drivers/usb/host/hc-cris-dbg.h
---- linux-2.6.32.orig/drivers/usb/host/hc-cris-dbg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/hc-cris-dbg.h 2010-01-10 13:41:59.276309474 +0100
+diff -Nur linux-2.6.34.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.34/drivers/usb/host/hc-cris-dbg.h
+--- linux-2.6.34.orig/drivers/usb/host/hc-cris-dbg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.34/drivers/usb/host/hc-cris-dbg.h 2010-05-25 19:41:51.632223123 +0200
@@ -0,0 +1,146 @@
+
+/* macros for debug output */
@@ -6915,10 +591,10 @@ diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.32/drivers/
+ }; \
+ s; \
+ })
-diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.c linux-2.6.32/drivers/usb/host/hc-crisv10.c
---- linux-2.6.32.orig/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/hc-crisv10.c 2010-01-10 13:41:59.326309689 +0100
-@@ -0,0 +1,4801 @@
+diff -Nur linux-2.6.34.orig/drivers/usb/host/hc-crisv10.c linux-2.6.34/drivers/usb/host/hc-crisv10.c
+--- linux-2.6.34.orig/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.34/drivers/usb/host/hc-crisv10.c 2010-05-25 19:48:39.180967618 +0200
+@@ -0,0 +1,4802 @@
+/*
+ *
+ * ETRAX 100LX USB Host Controller Driver
@@ -6933,6 +609,7 @@ diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.c linux-2.6.32/drivers/u
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
++#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
@@ -11720,9 +5397,9 @@ diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.c linux-2.6.32/drivers/u
+/* Module hooks */
+module_init(module_hcd_init);
+module_exit(module_hcd_exit);
-diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.h linux-2.6.32/drivers/usb/host/hc-crisv10.h
---- linux-2.6.32.orig/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/hc-crisv10.h 2010-01-10 13:41:59.326309689 +0100
+diff -Nur linux-2.6.34.orig/drivers/usb/host/hc-crisv10.h linux-2.6.34/drivers/usb/host/hc-crisv10.h
+--- linux-2.6.34.orig/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.34/drivers/usb/host/hc-crisv10.h 2010-05-25 19:41:51.695693244 +0200
@@ -0,0 +1,331 @@
+#ifndef __LINUX_ETRAX_USB_H
+#define __LINUX_ETRAX_USB_H
@@ -12055,116 +5732,30 @@ diff -Nur linux-2.6.32.orig/drivers/usb/host/hc-crisv10.h linux-2.6.32/drivers/u
+#define USB_SB_command__full__yes 1
+
+#endif
-diff -Nur linux-2.6.32.orig/drivers/usb/host/Makefile linux-2.6.32/drivers/usb/host/Makefile
---- linux-2.6.32.orig/drivers/usb/host/Makefile 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/Makefile 2010-01-10 13:41:59.326309689 +0100
-@@ -32,3 +32,4 @@
+diff -Nur linux-2.6.34.orig/drivers/usb/host/Makefile linux-2.6.34/drivers/usb/host/Makefile
+--- linux-2.6.34.orig/drivers/usb/host/Makefile 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/usb/host/Makefile 2010-05-25 19:42:41.304723153 +0200
+@@ -32,5 +32,6 @@
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
+obj-$(CONFIG_ETRAX_USB_HOST) += hc-crisv10.o
-diff -Nur linux-2.6.32.orig/drivers/usb/host/Makefile.orig linux-2.6.32/drivers/usb/host/Makefile.orig
---- linux-2.6.32.orig/drivers/usb/host/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/host/Makefile.orig 2009-12-03 04:51:21.000000000 +0100
-@@ -0,0 +1,34 @@
-+#
-+# Makefile for USB Host Controller Drivers
-+#
-+
-+ifeq ($(CONFIG_USB_DEBUG),y)
-+ EXTRA_CFLAGS += -DDEBUG
-+endif
-+
-+isp1760-objs := isp1760-hcd.o isp1760-if.o
-+fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
-+ fhci-tds.o fhci-sched.o
-+ifeq ($(CONFIG_FHCI_DEBUG),y)
-+fhci-objs += fhci-dbg.o
-+endif
-+xhci-objs := xhci-hcd.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o
-+
-+obj-$(CONFIG_USB_WHCI_HCD) += whci/
-+
-+obj-$(CONFIG_PCI) += pci-quirks.o
-+
-+obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
-+obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
-+obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
-+obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
-+obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
-+obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
-+obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
-+obj-$(CONFIG_USB_XHCI_HCD) += xhci.o
-+obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
-+obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
-+obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
-+obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
-+obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
-+obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
-diff -Nur linux-2.6.32.orig/drivers/usb/Makefile linux-2.6.32/drivers/usb/Makefile
---- linux-2.6.32.orig/drivers/usb/Makefile 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/drivers/usb/Makefile 2010-01-10 13:41:59.326309689 +0100
+ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
+
+diff -Nur linux-2.6.34.orig/drivers/usb/Makefile linux-2.6.34/drivers/usb/Makefile
+--- linux-2.6.34.orig/drivers/usb/Makefile 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/usb/Makefile 2010-05-25 19:43:05.884723032 +0200
@@ -21,6 +21,7 @@
obj-$(CONFIG_USB_R8A66597_HCD) += host/
obj-$(CONFIG_USB_HWA_HCD) += host/
obj-$(CONFIG_USB_ISP1760_HCD) += host/
+obj-$(CONFIG_ETRAX_USB_HOST) += host/
+ obj-$(CONFIG_USB_IMX21_HCD) += host/
obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
-
-diff -Nur linux-2.6.32.orig/drivers/usb/Makefile.orig linux-2.6.32/drivers/usb/Makefile.orig
---- linux-2.6.32.orig/drivers/usb/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.32/drivers/usb/Makefile.orig 2009-12-03 04:51:21.000000000 +0100
-@@ -0,0 +1,46 @@
-+#
-+# Makefile for the kernel USB device drivers.
-+#
-+
-+# Object files in subdirectories
-+
-+obj-$(CONFIG_USB) += core/
-+
-+obj-$(CONFIG_USB_MON) += mon/
-+
-+obj-$(CONFIG_PCI) += host/
-+obj-$(CONFIG_USB_EHCI_HCD) += host/
-+obj-$(CONFIG_USB_ISP116X_HCD) += host/
-+obj-$(CONFIG_USB_OHCI_HCD) += host/
-+obj-$(CONFIG_USB_UHCI_HCD) += host/
-+obj-$(CONFIG_USB_FHCI_HCD) += host/
-+obj-$(CONFIG_USB_XHCI_HCD) += host/
-+obj-$(CONFIG_USB_SL811_HCD) += host/
-+obj-$(CONFIG_USB_ISP1362_HCD) += host/
-+obj-$(CONFIG_USB_U132_HCD) += host/
-+obj-$(CONFIG_USB_R8A66597_HCD) += host/
-+obj-$(CONFIG_USB_HWA_HCD) += host/
-+obj-$(CONFIG_USB_ISP1760_HCD) += host/
-+
-+obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
-+
-+obj-$(CONFIG_USB_WUSB) += wusbcore/
-+
-+obj-$(CONFIG_USB_ACM) += class/
-+obj-$(CONFIG_USB_PRINTER) += class/
-+obj-$(CONFIG_USB_WDM) += class/
-+obj-$(CONFIG_USB_TMC) += class/
-+
-+obj-$(CONFIG_USB_STORAGE) += storage/
-+obj-$(CONFIG_USB) += storage/
-+
-+obj-$(CONFIG_USB_MDC800) += image/
-+obj-$(CONFIG_USB_MICROTEK) += image/
-+
-+obj-$(CONFIG_USB_SERIAL) += serial/
-+
-+obj-$(CONFIG_USB) += misc/
-+obj-y += early/
-+
-+obj-$(CONFIG_USB_ATM) += atm/
-+obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
-diff -Nur linux-2.6.32.orig/lib/klist.c linux-2.6.32/lib/klist.c
---- linux-2.6.32.orig/lib/klist.c 2009-12-03 04:51:21.000000000 +0100
-+++ linux-2.6.32/lib/klist.c 2010-01-10 13:41:59.326309689 +0100
+diff -Nur linux-2.6.34.orig/lib/klist.c linux-2.6.34/lib/klist.c
+--- linux-2.6.34.orig/lib/klist.c 2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/lib/klist.c 2010-05-25 19:41:55.440969800 +0200
@@ -60,7 +60,7 @@
{
knode->n_klist = klist;