summaryrefslogtreecommitdiff
path: root/target/cris/qemu-cris/patches
diff options
context:
space:
mode:
authorWaldemar Brodkorb <wbx@openadk.org>2017-11-12 08:02:13 +0100
committerWaldemar Brodkorb <wbx@openadk.org>2017-11-12 08:02:42 +0100
commitb9a522b762ad9ed32f2e082fc04126ce6f5ba5ae (patch)
tree0b346f87eb63a5b36ad9744e982cfadb3283fb7d /target/cris/qemu-cris/patches
parente7383dee0c3fc20a2752b13f21d0bb3f5988aad6 (diff)
linux: forgot to move 4.4.x patch directory after bump
Diffstat (limited to 'target/cris/qemu-cris/patches')
-rw-r--r--target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch4094
1 files changed, 0 insertions, 4094 deletions
diff --git a/target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch b/target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch
deleted file mode 100644
index cd098665e..000000000
--- a/target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch
+++ /dev/null
@@ -1,4094 +0,0 @@
-diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
-index e6c523c..5737a5b 100644
---- a/arch/cris/arch-v32/drivers/Kconfig
-+++ b/arch/cris/arch-v32/drivers/Kconfig
-@@ -8,9 +8,18 @@ config ETRAX_ETHERNET
- This option enables the ETRAX FS built-in 10/100Mbit Ethernet
- controller.
-
-+config ETRAX_HAVE_PHY
-+ bool "PHY present"
-+ default y
-+ help
-+ Search and use the first PHY available on the MDIO bus. Fail
-+ if none is found. Say Y here if you are not in a switched
-+ environment (single port device).
-+
- config ETRAX_NO_PHY
- bool "PHY not present"
- depends on ETRAX_ETHERNET
-+ default n
- help
- This option disables all MDIO communication with an ethernet
- transceiver connected to the MII interface. This option shall
-@@ -18,6 +27,70 @@ config ETRAX_NO_PHY
- switch. This option should normally be disabled. If enabled,
- speed and duplex will be locked to 100 Mbit and full duplex.
-
-+config ETRAX_PHY_FALLBACK
-+ bool "Fixed PHY fallback"
-+ depends on ETRAX_ETHERNET
-+ default n
-+ help
-+ If no PHY is found on the MDIO bus, fall back on a fixed
-+ 100/Full fixed PHY. Say Y here if you need dynamic PHY
-+ presence detection (switch connection where some but not
-+ all ports have integrated PHYs), otherwise say N.
-+
-+config ETRAX_ETHERNET_IFACE0
-+ depends on ETRAX_ETHERNET
-+ bool "Enable network interface 0"
-+
-+config ETRAX_ETHERNET_IFACE1
-+ depends on (ETRAX_ETHERNET && ETRAXFS)
-+ bool "Enable network interface 1 (uses DMA6 and DMA7)"
-+
-+choice
-+ prompt "Eth0 led group"
-+ depends on ETRAX_ETHERNET_IFACE0
-+ default ETRAX_ETH0_USE_LEDGRP0
-+
-+config ETRAX_ETH0_USE_LEDGRP0
-+ bool "Use LED grp 0"
-+ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO
-+ help
-+ Use LED grp 0 for eth0
-+
-+config ETRAX_ETH0_USE_LEDGRP1
-+ bool "Use LED grp 1"
-+ depends on ETRAX_NBR_LED_GRP_TWO
-+ help
-+ Use LED grp 1 for eth0
-+
-+config ETRAX_ETH0_USE_LEDGRPNULL
-+ bool "Use no LEDs for eth0"
-+ help
-+ Use no LEDs for eth0
-+endchoice
-+
-+choice
-+ prompt "Eth1 led group"
-+ depends on ETRAX_ETHERNET_IFACE1
-+ default ETRAX_ETH1_USE_LEDGRP1
-+
-+config ETRAX_ETH1_USE_LEDGRP0
-+ bool "Use LED grp 0"
-+ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO
-+ help
-+ Use LED grp 0 for eth1
-+
-+config ETRAX_ETH1_USE_LEDGRP1
-+ bool "Use LED grp 1"
-+ depends on ETRAX_NBR_LED_GRP_TWO
-+ help
-+ Use LED grp 1 for eth1
-+
-+config ETRAX_ETH1_USE_LEDGRPNULL
-+ bool "Use no LEDs for eth1"
-+ help
-+ Use no LEDs for eth1
-+endchoice
-+
- config ETRAXFS_SERIAL
- bool "Serial-port support"
- depends on ETRAX_ARCH_V32
-diff --git a/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h b/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h
-index 90fe8a2..37bec9a 100644
---- a/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h
-+++ b/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h
-@@ -2,69 +2,64 @@
- #define __eth_defs_h
-
- /*
-- * This file is autogenerated from
-- * file: eth.r
-- * id: eth_regs.r,v 1.16 2005/05/20 15:41:22 perz Exp
-- * last modfied: Mon Jan 9 06:06:41 2006
-- *
-- * by /n/asic/design/tools/rdesc/rdes2c eth.r
-- * id: $Id: eth_defs.h,v 1.7 2006/01/26 13:45:30 karljope Exp $
-- * Any changes here will be lost.
-- *
-- * -*- buffer-read-only: t -*-
-+ * Note: Previously this was autogenerated code from the hardware
-+ * implementation. However, to enable the same file to be used
-+ * for both ARTPEC-3 and ETRAX FS this file is now hand-edited.
-+ * Be careful.
- */
-+
- /* Main access macros */
- #ifndef REG_RD
- #define REG_RD( scope, inst, reg ) \
-- REG_READ( reg_##scope##_##reg, \
-- (inst) + REG_RD_ADDR_##scope##_##reg )
-+ REG_READ( reg_##scope##_##reg, \
-+ (inst) + REG_RD_ADDR_##scope##_##reg )
- #endif
-
- #ifndef REG_WR
- #define REG_WR( scope, inst, reg, val ) \
-- REG_WRITE( reg_##scope##_##reg, \
-- (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-+ REG_WRITE( reg_##scope##_##reg, \
-+ (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
- #endif
-
- #ifndef REG_RD_VECT
- #define REG_RD_VECT( scope, inst, reg, index ) \
-- REG_READ( reg_##scope##_##reg, \
-- (inst) + REG_RD_ADDR_##scope##_##reg + \
-- (index) * STRIDE_##scope##_##reg )
-+ REG_READ( reg_##scope##_##reg, \
-+ (inst) + REG_RD_ADDR_##scope##_##reg + \
-+ (index) * STRIDE_##scope##_##reg )
- #endif
-
- #ifndef REG_WR_VECT
- #define REG_WR_VECT( scope, inst, reg, index, val ) \
-- REG_WRITE( reg_##scope##_##reg, \
-- (inst) + REG_WR_ADDR_##scope##_##reg + \
-- (index) * STRIDE_##scope##_##reg, (val) )
-+ REG_WRITE( reg_##scope##_##reg, \
-+ (inst) + REG_WR_ADDR_##scope##_##reg + \
-+ (index) * STRIDE_##scope##_##reg, (val) )
- #endif
-
- #ifndef REG_RD_INT
- #define REG_RD_INT( scope, inst, reg ) \
-- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg )
-+ REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg )
- #endif
-
- #ifndef REG_WR_INT
- #define REG_WR_INT( scope, inst, reg, val ) \
-- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
-+ REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) )
- #endif
-
- #ifndef REG_RD_INT_VECT
- #define REG_RD_INT_VECT( scope, inst, reg, index ) \
-- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \
-- (index) * STRIDE_##scope##_##reg )
-+ REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \
-+ (index) * STRIDE_##scope##_##reg )
- #endif
-
- #ifndef REG_WR_INT_VECT
- #define REG_WR_INT_VECT( scope, inst, reg, index, val ) \
-- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \
-- (index) * STRIDE_##scope##_##reg, (val) )
-+ REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \
-+ (index) * STRIDE_##scope##_##reg, (val) )
- #endif
-
- #ifndef REG_TYPE_CONV
- #define REG_TYPE_CONV( type, orgtype, val ) \
-- ( { union { orgtype o; type n; } r; r.o = val; r.n; } )
-+ ( { union { orgtype o; type n; } r; r.o = val; r.n; } )
- #endif
-
- #ifndef reg_page_size
-@@ -73,306 +68,332 @@
-
- #ifndef REG_ADDR
- #define REG_ADDR( scope, inst, reg ) \
-- ( (inst) + REG_RD_ADDR_##scope##_##reg )
-+ ( (inst) + REG_RD_ADDR_##scope##_##reg )
- #endif
-
- #ifndef REG_ADDR_VECT
- #define REG_ADDR_VECT( scope, inst, reg, index ) \
-- ( (inst) + REG_RD_ADDR_##scope##_##reg + \
-- (index) * STRIDE_##scope##_##reg )
-+ ( (inst) + REG_RD_ADDR_##scope##_##reg + \
-+ (index) * STRIDE_##scope##_##reg )
- #endif
-
- /* C-code for register scope eth */
-
- /* Register rw_ma0_lo, scope eth, type rw */
- typedef struct {
-- unsigned int addr : 32;
-+ unsigned int addr : 32;
- } reg_eth_rw_ma0_lo;
- #define REG_RD_ADDR_eth_rw_ma0_lo 0
- #define REG_WR_ADDR_eth_rw_ma0_lo 0
-
- /* Register rw_ma0_hi, scope eth, type rw */
- typedef struct {
-- unsigned int addr : 16;
-- unsigned int dummy1 : 16;
-+ unsigned int addr : 16;
-+ unsigned int dummy1 : 16;
- } reg_eth_rw_ma0_hi;
- #define REG_RD_ADDR_eth_rw_ma0_hi 4
- #define REG_WR_ADDR_eth_rw_ma0_hi 4
-
- /* Register rw_ma1_lo, scope eth, type rw */
- typedef struct {
-- unsigned int addr : 32;
-+ unsigned int addr : 32;
- } reg_eth_rw_ma1_lo;
- #define REG_RD_ADDR_eth_rw_ma1_lo 8
- #define REG_WR_ADDR_eth_rw_ma1_lo 8
-
- /* Register rw_ma1_hi, scope eth, type rw */
- typedef struct {
-- unsigned int addr : 16;
-- unsigned int dummy1 : 16;
-+ unsigned int addr : 16;
-+ unsigned int dummy1 : 16;
- } reg_eth_rw_ma1_hi;
- #define REG_RD_ADDR_eth_rw_ma1_hi 12
- #define REG_WR_ADDR_eth_rw_ma1_hi 12
-
- /* Register rw_ga_lo, scope eth, type rw */
- typedef struct {
-- unsigned int tbl : 32;
-+ unsigned int table : 32;
- } reg_eth_rw_ga_lo;
- #define REG_RD_ADDR_eth_rw_ga_lo 16
- #define REG_WR_ADDR_eth_rw_ga_lo 16
-
- /* Register rw_ga_hi, scope eth, type rw */
- typedef struct {
-- unsigned int tbl : 32;
-+ unsigned int table : 32;
- } reg_eth_rw_ga_hi;
- #define REG_RD_ADDR_eth_rw_ga_hi 20
- #define REG_WR_ADDR_eth_rw_ga_hi 20
-
- /* Register rw_gen_ctrl, scope eth, type rw */
- typedef struct {
-- unsigned int en : 1;
-- unsigned int phy : 2;
-- unsigned int protocol : 1;
-- unsigned int loopback : 1;
-- unsigned int flow_ctrl : 1;
-- unsigned int gtxclk_out : 1;
-- unsigned int phyrst_n : 1;
-- unsigned int dummy1 : 24;
-+ unsigned int en : 1;
-+ unsigned int phy : 2;
-+ unsigned int protocol : 1;
-+ unsigned int loopback : 1;
-+ unsigned int flow_ctrl : 1;
-+ unsigned int gtxclk_out : 1;
-+ unsigned int phyrst_n : 1;
-+ unsigned int dummy1 : 24;
- } reg_eth_rw_gen_ctrl;
- #define REG_RD_ADDR_eth_rw_gen_ctrl 24
- #define REG_WR_ADDR_eth_rw_gen_ctrl 24
-
- /* Register rw_rec_ctrl, scope eth, type rw */
- typedef struct {
-- unsigned int ma0 : 1;
-- unsigned int ma1 : 1;
-- unsigned int individual : 1;
-- unsigned int broadcast : 1;
-- unsigned int undersize : 1;
-- unsigned int oversize : 1;
-- unsigned int bad_crc : 1;
-- unsigned int duplex : 1;
-- unsigned int max_size : 16;
-- unsigned int dummy1 : 8;
-+ unsigned int ma0 : 1;
-+ unsigned int ma1 : 1;
-+ unsigned int individual : 1;
-+ unsigned int broadcast : 1;
-+ unsigned int undersize : 1;
-+ unsigned int oversize : 1;
-+ unsigned int bad_crc : 1;
-+ unsigned int duplex : 1;
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ unsigned int max_size : 16;
-+ unsigned int dummy1 : 8;
-+#else
-+ unsigned int max_size : 1;
-+ unsigned int dummy1 : 23;
-+#endif
- } reg_eth_rw_rec_ctrl;
- #define REG_RD_ADDR_eth_rw_rec_ctrl 28
- #define REG_WR_ADDR_eth_rw_rec_ctrl 28
-
- /* Register rw_tr_ctrl, scope eth, type rw */
- typedef struct {
-- unsigned int crc : 1;
-- unsigned int pad : 1;
-- unsigned int retry : 1;
-- unsigned int ignore_col : 1;
-- unsigned int cancel : 1;
-- unsigned int hsh_delay : 1;
-- unsigned int ignore_crs : 1;
-- unsigned int carrier_ext : 1;
-- unsigned int dummy1 : 24;
-+ unsigned int crc : 1;
-+ unsigned int pad : 1;
-+ unsigned int retry : 1;
-+ unsigned int ignore_col : 1;
-+ unsigned int cancel : 1;
-+ unsigned int hsh_delay : 1;
-+ unsigned int ignore_crs : 1;
-+ unsigned int carrier_ext : 1;
-+ unsigned int dummy1 : 24;
- } reg_eth_rw_tr_ctrl;
- #define REG_RD_ADDR_eth_rw_tr_ctrl 32
- #define REG_WR_ADDR_eth_rw_tr_ctrl 32
-
- /* Register rw_clr_err, scope eth, type rw */
- typedef struct {
-- unsigned int clr : 1;
-- unsigned int dummy1 : 31;
-+ unsigned int clr : 1;
-+ unsigned int dummy1 : 31;
- } reg_eth_rw_clr_err;
- #define REG_RD_ADDR_eth_rw_clr_err 36
- #define REG_WR_ADDR_eth_rw_clr_err 36
-
- /* Register rw_mgm_ctrl, scope eth, type rw */
- typedef struct {
-- unsigned int mdio : 1;
-- unsigned int mdoe : 1;
-- unsigned int mdc : 1;
-- unsigned int dummy1 : 29;
-+ unsigned int mdio : 1;
-+ unsigned int mdoe : 1;
-+ unsigned int mdc : 1;
-+ unsigned int phyclk : 1;
-+ unsigned int txdata : 4;
-+ unsigned int txen : 1;
-+ unsigned int dummy1 : 23;
- } reg_eth_rw_mgm_ctrl;
- #define REG_RD_ADDR_eth_rw_mgm_ctrl 40
- #define REG_WR_ADDR_eth_rw_mgm_ctrl 40
-
- /* Register r_stat, scope eth, type r */
- typedef struct {
-- unsigned int mdio : 1;
-- unsigned int exc_col : 1;
-- unsigned int urun : 1;
-- unsigned int clk_125 : 1;
-- unsigned int dummy1 : 28;
-+ unsigned int mdio : 1;
-+ unsigned int exc_col : 1;
-+ unsigned int urun : 1;
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ unsigned int clk_125 : 1;
-+#else
-+ unsigned int phyclk : 1;
-+#endif
-+ unsigned int txdata : 4;
-+ unsigned int txen : 1;
-+ unsigned int col : 1;
-+ unsigned int crs : 1;
-+ unsigned int txclk : 1;
-+ unsigned int rxdata : 4;
-+ unsigned int rxer : 1;
-+ unsigned int rxdv : 1;
-+ unsigned int rxclk : 1;
-+ unsigned int dummy1 : 13;
- } reg_eth_r_stat;
- #define REG_RD_ADDR_eth_r_stat 44
-
- /* Register rs_rec_cnt, scope eth, type rs */
- typedef struct {
-- unsigned int crc_err : 8;
-- unsigned int align_err : 8;
-- unsigned int oversize : 8;
-- unsigned int congestion : 8;
-+ unsigned int crc_err : 8;
-+ unsigned int align_err : 8;
-+ unsigned int oversize : 8;
-+ unsigned int congestion : 8;
- } reg_eth_rs_rec_cnt;
- #define REG_RD_ADDR_eth_rs_rec_cnt 48
-
- /* Register r_rec_cnt, scope eth, type r */
- typedef struct {
-- unsigned int crc_err : 8;
-- unsigned int align_err : 8;
-- unsigned int oversize : 8;
-- unsigned int congestion : 8;
-+ unsigned int crc_err : 8;
-+ unsigned int align_err : 8;
-+ unsigned int oversize : 8;
-+ unsigned int congestion : 8;
- } reg_eth_r_rec_cnt;
- #define REG_RD_ADDR_eth_r_rec_cnt 52
-
- /* Register rs_tr_cnt, scope eth, type rs */
- typedef struct {
-- unsigned int single_col : 8;
-- unsigned int mult_col : 8;
-- unsigned int late_col : 8;
-- unsigned int deferred : 8;
-+ unsigned int single_col : 8;
-+ unsigned int mult_col : 8;
-+ unsigned int late_col : 8;
-+ unsigned int deferred : 8;
- } reg_eth_rs_tr_cnt;
- #define REG_RD_ADDR_eth_rs_tr_cnt 56
-
- /* Register r_tr_cnt, scope eth, type r */
- typedef struct {
-- unsigned int single_col : 8;
-- unsigned int mult_col : 8;
-- unsigned int late_col : 8;
-- unsigned int deferred : 8;
-+ unsigned int single_col : 8;
-+ unsigned int mult_col : 8;
-+ unsigned int late_col : 8;
-+ unsigned int deferred : 8;
- } reg_eth_r_tr_cnt;
- #define REG_RD_ADDR_eth_r_tr_cnt 60
-
- /* Register rs_phy_cnt, scope eth, type rs */
- typedef struct {
-- unsigned int carrier_loss : 8;
-- unsigned int sqe_err : 8;
-- unsigned int dummy1 : 16;
-+ unsigned int carrier_loss : 8;
-+ unsigned int sqe_err : 8;
-+ unsigned int dummy1 : 16;
- } reg_eth_rs_phy_cnt;
- #define REG_RD_ADDR_eth_rs_phy_cnt 64
-
- /* Register r_phy_cnt, scope eth, type r */
- typedef struct {
-- unsigned int carrier_loss : 8;
-- unsigned int sqe_err : 8;
-- unsigned int dummy1 : 16;
-+ unsigned int carrier_loss : 8;
-+ unsigned int sqe_err : 8;
-+ unsigned int dummy1 : 16;
- } reg_eth_r_phy_cnt;
- #define REG_RD_ADDR_eth_r_phy_cnt 68
-
- /* Register rw_test_ctrl, scope eth, type rw */
- typedef struct {
-- unsigned int snmp_inc : 1;
-- unsigned int snmp : 1;
-- unsigned int backoff : 1;
-- unsigned int dummy1 : 29;
-+ unsigned int snmp_inc : 1;
-+ unsigned int snmp : 1;
-+ unsigned int backoff : 1;
-+ unsigned int dummy1 : 29;
- } reg_eth_rw_test_ctrl;
- #define REG_RD_ADDR_eth_rw_test_ctrl 72
- #define REG_WR_ADDR_eth_rw_test_ctrl 72
-
- /* Register rw_intr_mask, scope eth, type rw */
- typedef struct {
-- unsigned int crc : 1;
-- unsigned int align : 1;
-- unsigned int oversize : 1;
-- unsigned int congestion : 1;
-- unsigned int single_col : 1;
-- unsigned int mult_col : 1;
-- unsigned int late_col : 1;
-- unsigned int deferred : 1;
-- unsigned int carrier_loss : 1;
-- unsigned int sqe_test_err : 1;
-- unsigned int orun : 1;
-- unsigned int urun : 1;
-- unsigned int exc_col : 1;
-- unsigned int mdio : 1;
-- unsigned int dummy1 : 18;
-+ unsigned int crc : 1;
-+ unsigned int align : 1;
-+ unsigned int oversize : 1;
-+ unsigned int congestion : 1;
-+ unsigned int single_col : 1;
-+ unsigned int mult_col : 1;
-+ unsigned int late_col : 1;
-+ unsigned int deferred : 1;
-+ unsigned int carrier_loss : 1;
-+ unsigned int sqe_test_err : 1;
-+ unsigned int orun : 1;
-+ unsigned int urun : 1;
-+ unsigned int exc_col : 1;
-+ unsigned int mdio : 1;
-+ unsigned int dummy1 : 18;
- } reg_eth_rw_intr_mask;
- #define REG_RD_ADDR_eth_rw_intr_mask 76
- #define REG_WR_ADDR_eth_rw_intr_mask 76
-
- /* Register rw_ack_intr, scope eth, type rw */
- typedef struct {
-- unsigned int crc : 1;
-- unsigned int align : 1;
-- unsigned int oversize : 1;
-- unsigned int congestion : 1;
-- unsigned int single_col : 1;
-- unsigned int mult_col : 1;
-- unsigned int late_col : 1;
-- unsigned int deferred : 1;
-- unsigned int carrier_loss : 1;
-- unsigned int sqe_test_err : 1;
-- unsigned int orun : 1;
-- unsigned int urun : 1;
-- unsigned int exc_col : 1;
-- unsigned int mdio : 1;
-- unsigned int dummy1 : 18;
-+ unsigned int crc : 1;
-+ unsigned int align : 1;
-+ unsigned int oversize : 1;
-+ unsigned int congestion : 1;
-+ unsigned int single_col : 1;
-+ unsigned int mult_col : 1;
-+ unsigned int late_col : 1;
-+ unsigned int deferred : 1;
-+ unsigned int carrier_loss : 1;
-+ unsigned int sqe_test_err : 1;
-+ unsigned int orun : 1;
-+ unsigned int urun : 1;
-+ unsigned int exc_col : 1;
-+ unsigned int mdio : 1;
-+ unsigned int dummy1 : 18;
- } reg_eth_rw_ack_intr;
- #define REG_RD_ADDR_eth_rw_ack_intr 80
- #define REG_WR_ADDR_eth_rw_ack_intr 80
-
- /* Register r_intr, scope eth, type r */
- typedef struct {
-- unsigned int crc : 1;
-- unsigned int align : 1;
-- unsigned int oversize : 1;
-- unsigned int congestion : 1;
-- unsigned int single_col : 1;
-- unsigned int mult_col : 1;
-- unsigned int late_col : 1;
-- unsigned int deferred : 1;
-- unsigned int carrier_loss : 1;
-- unsigned int sqe_test_err : 1;
-- unsigned int orun : 1;
-- unsigned int urun : 1;
-- unsigned int exc_col : 1;
-- unsigned int mdio : 1;
-- unsigned int dummy1 : 18;
-+ unsigned int crc : 1;
-+ unsigned int align : 1;
-+ unsigned int oversize : 1;
-+ unsigned int congestion : 1;
-+ unsigned int single_col : 1;
-+ unsigned int mult_col : 1;
-+ unsigned int late_col : 1;
-+ unsigned int deferred : 1;
-+ unsigned int carrier_loss : 1;
-+ unsigned int sqe_test_err : 1;
-+ unsigned int orun : 1;
-+ unsigned int urun : 1;
-+ unsigned int exc_col : 1;
-+ unsigned int mdio : 1;
-+ unsigned int dummy1 : 18;
- } reg_eth_r_intr;
- #define REG_RD_ADDR_eth_r_intr 84
-
- /* Register r_masked_intr, scope eth, type r */
- typedef struct {
-- unsigned int crc : 1;
-- unsigned int align : 1;
-- unsigned int oversize : 1;
-- unsigned int congestion : 1;
-- unsigned int single_col : 1;
-- unsigned int mult_col : 1;
-- unsigned int late_col : 1;
-- unsigned int deferred : 1;
-- unsigned int carrier_loss : 1;
-- unsigned int sqe_test_err : 1;
-- unsigned int orun : 1;
-- unsigned int urun : 1;
-- unsigned int exc_col : 1;
-- unsigned int mdio : 1;
-- unsigned int dummy1 : 18;
-+ unsigned int crc : 1;
-+ unsigned int align : 1;
-+ unsigned int oversize : 1;
-+ unsigned int congestion : 1;
-+ unsigned int single_col : 1;
-+ unsigned int mult_col : 1;
-+ unsigned int late_col : 1;
-+ unsigned int deferred : 1;
-+ unsigned int carrier_loss : 1;
-+ unsigned int sqe_test_err : 1;
-+ unsigned int orun : 1;
-+ unsigned int urun : 1;
-+ unsigned int exc_col : 1;
-+ unsigned int mdio : 1;
-+ unsigned int dummy1 : 18;
- } reg_eth_r_masked_intr;
- #define REG_RD_ADDR_eth_r_masked_intr 88
-
--
- /* Constants */
- enum {
-- regk_eth_discard = 0x00000000,
-- regk_eth_ether = 0x00000000,
-- regk_eth_full = 0x00000001,
-- regk_eth_gmii = 0x00000003,
-- regk_eth_gtxclk = 0x00000001,
-- regk_eth_half = 0x00000000,
-- regk_eth_hsh = 0x00000001,
-- regk_eth_mii = 0x00000001,
-- regk_eth_mii_arec = 0x00000002,
-- regk_eth_mii_clk = 0x00000000,
-- regk_eth_no = 0x00000000,
-- regk_eth_phyrst = 0x00000000,
-- regk_eth_rec = 0x00000001,
-- regk_eth_rw_ga_hi_default = 0x00000000,
-- regk_eth_rw_ga_lo_default = 0x00000000,
-- regk_eth_rw_gen_ctrl_default = 0x00000000,
-- regk_eth_rw_intr_mask_default = 0x00000000,
-- regk_eth_rw_ma0_hi_default = 0x00000000,
-- regk_eth_rw_ma0_lo_default = 0x00000000,
-- regk_eth_rw_ma1_hi_default = 0x00000000,
-- regk_eth_rw_ma1_lo_default = 0x00000000,
-- regk_eth_rw_mgm_ctrl_default = 0x00000000,
-- regk_eth_rw_test_ctrl_default = 0x00000000,
-- regk_eth_size1518 = 0x000005ee,
-- regk_eth_size1522 = 0x000005f2,
-- regk_eth_yes = 0x00000001
-+ regk_eth_discard = 0x00000000,
-+ regk_eth_ether = 0x00000000,
-+ regk_eth_full = 0x00000001,
-+ regk_eth_gmii = 0x00000003,
-+ regk_eth_gtxclk = 0x00000001,
-+ regk_eth_half = 0x00000000,
-+ regk_eth_hsh = 0x00000001,
-+ regk_eth_mii = 0x00000001,
-+ regk_eth_mii_arec = 0x00000002,
-+ regk_eth_mii_clk = 0x00000000,
-+ regk_eth_no = 0x00000000,
-+ regk_eth_phyrst = 0x00000000,
-+ regk_eth_rec = 0x00000001,
-+ regk_eth_rw_ga_hi_default = 0x00000000,
-+ regk_eth_rw_ga_lo_default = 0x00000000,
-+ regk_eth_rw_gen_ctrl_default = 0x00000000,
-+ regk_eth_rw_intr_mask_default = 0x00000000,
-+ regk_eth_rw_ma0_hi_default = 0x00000000,
-+ regk_eth_rw_ma0_lo_default = 0x00000000,
-+ regk_eth_rw_ma1_hi_default = 0x00000000,
-+ regk_eth_rw_ma1_lo_default = 0x00000000,
-+ regk_eth_rw_mgm_ctrl_default = 0x00000000,
-+ regk_eth_rw_test_ctrl_default = 0x00000000,
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ regk_eth_size1518 = 0x000005ee,
-+ regk_eth_size1522 = 0x000005f2,
-+#else
-+ regk_eth_size1518 = 0x00000000,
-+ regk_eth_size1522 = 0x00000001,
-+#endif
-+ regk_eth_yes = 0x00000001
- };
-+
- #endif /* __eth_defs_h */
-diff --git a/drivers/net/cris/Makefile b/drivers/net/cris/Makefile
-index b4e8932..39b4d4d 100644
---- a/drivers/net/cris/Makefile
-+++ b/drivers/net/cris/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_ETRAX_ARCH_V10) += eth_v10.o
-+obj-$(CONFIG_ETRAX_ARCH_V32) += eth_v32.o
-diff --git a/drivers/net/cris/eth_v32.c b/drivers/net/cris/eth_v32.c
-new file mode 100644
-index 0000000..92c4cae
---- /dev/null
-+++ b/drivers/net/cris/eth_v32.c
-@@ -0,0 +1,3093 @@
-+/*
-+ * Driver for the ETRAX FS/Artpec-3 network controller.
-+ *
-+ * Copyright (c) 2003-2008 Axis Communications AB.
-+ *
-+ * TODO:
-+ * * Decrease the amount of code running with interrupts disabled.
-+ * * Rework the error handling so that we do not need to touch the tx
-+ * ring from the error interrupts. When done, we should be able to
-+ * do tx completition from the NAPI loop without disabling interrupts.
-+ * * Remove the gigabit code. It's probably never going to be used.
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/types.h>
-+#include <linux/fcntl.h>
-+#include <linux/interrupt.h>
-+#include <linux/spinlock.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+
-+#include <asm/io.h> /* CRIS_LED_* I/O functions */
-+#include <asm/irq.h>
-+#include <hwregs/reg_map.h>
-+#include <hwregs/reg_rdwr.h>
-+#include <hwregs/dma.h>
-+#include <hwregs/eth_defs.h>
-+#ifdef CONFIG_ETRAXFS
-+#include <hwregs/config_defs.h>
-+#else
-+#include <hwregs/clkgen_defs.h>
-+#endif
-+#include <hwregs/intr_vect_defs.h>
-+#include <hwregs/strmux_defs.h>
-+#include <asm/bitops.h>
-+#include <asm/ethernet.h>
-+#include <mach/dma.h>
-+#include <pinmux.h>
-+
-+#include "eth_v32.h"
-+
-+#ifndef CONFIG_ETRAXFS
-+#define ETH0_INTR_VECT ETH_INTR_VECT
-+#define ETH1_INTR_VECT ETH_INTR_VECT
-+#define regi_eth0 regi_eth
-+#define regi_eth1 regi_
-+#endif
-+
-+#define DEBUG(x)
-+#define GET_BIT(bit,val) (((val) >> (bit)) & 0x01)
-+
-+#if defined(CONFIG_ETRAX_HAVE_PHY) || defined(CONFIG_ETRAX_PHY_FALLBACK)
-+#define RESET_PHY 1
-+#else
-+#define RESET_PHY 0
-+#endif
-+
-+enum {
-+ HAVE_PHY,
-+ NO_PHY,
-+ FALLBACK_PHY,
-+};
-+#if defined(CONFIG_ETRAX_PHY_FALLBACK)
-+#define PHY_MODE (FALLBACK_PHY)
-+#elif defined(CONFIG_ETRAX_NO_PHY)
-+#define PHY_MODE (NO_PHY)
-+#elif defined(CONFIG_ETRAX_HAVE_PHY)
-+#define PHY_MODE (HAVE_PHY)
-+#else
-+#error Unknown PHY behaviour
-+#endif
-+
-+static struct {
-+ const char str[ETH_GSTRING_LEN];
-+} const ethtool_stats_keys[] = {
-+ { "tx_dma_restarts" },
-+ { "tx_mac_resets" },
-+ { "rx_dma_restarts" },
-+ { "rx_dma_timeouts" },
-+ { " dropped_rx" }
-+};
-+
-+static void crisv32_eth_check_speed(unsigned long idev);
-+static void crisv32_eth_check_duplex(unsigned long idev);
-+static void update_rx_stats(struct crisv32_ethernet_local *np);
-+static void update_tx_stats(struct crisv32_ethernet_local *np);
-+static int crisv32_eth_poll(struct napi_struct *napi, int budget);
-+static void crisv32_eth_setup_controller(struct net_device *dev);
-+static int crisv32_eth_request_irqdma(struct net_device *dev);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+static void
-+crisv32_eth_restart_rx_dma(struct net_device* dev,
-+ struct crisv32_ethernet_local *np);
-+#endif
-+#if 0
-+static void crisv32_ethernet_bug(struct net_device *dev);
-+#endif
-+
-+/*
-+ * The name of the card. Is used for messages and in the requests for
-+ * io regions, irqs and dma channels.
-+ */
-+#ifdef CONFIG_ETRAXFS
-+static const char cardname[] = "ETRAX FS built-in ethernet controller";
-+#else
-+static const char cardname[] = "ARTPEC-3 built-in ethernet controller";
-+#endif
-+
-+/* Some chipset needs special care. */
-+#ifndef CONFIG_ETRAX_NO_PHY
-+struct transceiver_ops transceivers[] = {
-+ {0x1018, broadcom_check_speed, broadcom_check_duplex},
-+ {0x50EF, broadcom_check_speed, broadcom_check_duplex},
-+ /* TDK 2120 and TDK 2120C */
-+ {0xC039, tdk_check_speed, tdk_check_duplex},
-+ {0x039C, tdk_check_speed, tdk_check_duplex},
-+ /* Intel LXT972A*/
-+ {0x04de, intel_check_speed, intel_check_duplex},
-+ /* National Semiconductor DP83865 */
-+ {0x0017, national_check_speed, national_check_duplex},
-+ /* Vitesse VCS8641 */
-+ {0x01c1, vitesse_check_speed, vitesse_check_duplex},
-+ /* Davicom DM9161 */
-+ {0x606E, davicom_check_speed, davicom_check_duplex},
-+ /* Generic, must be last. */
-+ {0x0000, generic_check_speed, generic_check_duplex}
-+};
-+#endif
-+
-+static struct net_device *crisv32_dev[2];
-+static struct crisv32_eth_leds *crisv32_leds[3];
-+
-+/* Default MAC address for interface 0.
-+ * The real one will be set later. */
-+static struct sockaddr default_mac_iface0 =
-+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00}};
-+
-+#ifdef CONFIG_CPU_FREQ
-+static int
-+crisv32_ethernet_freq_notifier(struct notifier_block *nb, unsigned long val,
-+ void *data);
-+
-+static struct notifier_block crisv32_ethernet_freq_notifier_block = {
-+ .notifier_call = crisv32_ethernet_freq_notifier
-+};
-+#endif
-+
-+static void receive_timeout(unsigned long arg);
-+static void receive_timeout_work(struct work_struct* work);
-+static void transmit_timeout(unsigned long arg);
-+
-+/*
-+ * mask in and out tx/rx interrupts.
-+ */
-+static inline void crisv32_disable_tx_ints(struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_no };
-+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx);
-+}
-+
-+static inline void crisv32_enable_tx_ints(struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_yes };
-+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx);
-+}
-+
-+static inline void crisv32_disable_rx_ints(struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_no };
-+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx);
-+}
-+
-+static inline void crisv32_enable_rx_ints(struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_yes };
-+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx);
-+}
-+
-+static inline void crisv32_disable_eth_ints(struct crisv32_ethernet_local *np)
-+{
-+ int intr_mask_nw = 0x0;
-+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw);
-+}
-+
-+static inline void crisv32_enable_eth_ints(struct crisv32_ethernet_local *np)
-+{
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ /* For Artpec-3 we use overrun to workaround voodoo TR 87 */
-+ int intr_mask_nw = 0x1c00;
-+#else
-+ int intr_mask_nw = 0x1800;
-+#endif
-+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw);
-+}
-+
-+static inline int crisv32_eth_gigabit(struct crisv32_ethernet_local *np)
-+{
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ return np->gigabit_mode;
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static inline void crisv32_eth_set_gigabit(struct crisv32_ethernet_local *np,
-+ int g)
-+{
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ np->gigabit_mode = g;
-+#endif
-+}
-+
-+/* start/stop receiver */
-+static inline void crisv32_start_receiver(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rw_rec_ctrl rec_ctrl;
-+
-+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.ma0 = regk_eth_yes;
-+ rec_ctrl.broadcast = regk_eth_rec;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+}
-+
-+static inline void crisv32_stop_receiver(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rw_rec_ctrl rec_ctrl;
-+
-+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.ma0 = regk_eth_no;
-+ rec_ctrl.broadcast = regk_eth_discard;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+}
-+
-+static inline void crisv32_eth_reset(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rw_gen_ctrl gen_ctrl = { 0 };
-+
-+ gen_ctrl = REG_RD(eth, np->eth_inst, rw_gen_ctrl);
-+ gen_ctrl.en = regk_eth_no;
-+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+ gen_ctrl.en = regk_eth_yes;
-+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+}
-+
-+static void crisv32_eth_tx_cancel_frame(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rw_tr_ctrl tr_ctrl;
-+
-+ /* Cancel any pending transmits. This should bring us to the
-+ excessive collisions state but it doesn't always do it. */
-+ tr_ctrl = REG_RD(eth, np->eth_inst, rw_tr_ctrl);
-+ tr_ctrl.cancel = 1;
-+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
-+ tr_ctrl.cancel = 0;
-+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
-+}
-+
-+/*
-+ * Hack to disconnect/reconnect the dma from the ethernet block while we reset
-+ * things. TODO: verify that we don't need to disconnect out channels and
-+ * remove that code.
-+ *
-+ * ARTPEC-3 has only a single ethernet block so np->eth_inst is always eth0.
-+ * The strmux values are named slightly different, redefine to avoid #ifdefs
-+ * in the code blocks. For artpec3 only regk_strmux_eth0 and channel 0/1
-+ * should be used.
-+ */
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+#define regk_strmux_eth0 regk_strmux_eth
-+#define regk_strmux_eth1 regk_strmux_eth
-+#endif
-+static inline void
-+crisv32_disconnect_eth_tx_dma(struct crisv32_ethernet_local *np)
-+{
-+ reg_strmux_rw_cfg strmux_cfg;
-+
-+ strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
-+ if (np->eth_inst == regi_eth0)
-+ strmux_cfg.dma0 = regk_strmux_off;
-+ else
-+ strmux_cfg.dma6 = regk_strmux_off;
-+ REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
-+}
-+
-+static inline void crisv32_connect_eth_tx_dma(struct crisv32_ethernet_local *np)
-+{
-+ reg_strmux_rw_cfg strmux_cfg;
-+
-+ strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
-+ if (np->eth_inst == regi_eth0)
-+ strmux_cfg.dma0 = regk_strmux_eth0;
-+ else
-+ strmux_cfg.dma6 = regk_strmux_eth1;
-+ REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
-+}
-+
-+static inline void
-+crisv32_disconnect_eth_rx_dma(struct crisv32_ethernet_local *np)
-+{
-+ reg_strmux_rw_cfg strmux_cfg;
-+
-+ strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
-+ if (np->eth_inst == regi_eth0)
-+ strmux_cfg.dma1 = regk_strmux_off;
-+ else
-+ strmux_cfg.dma7 = regk_strmux_off;
-+ REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
-+}
-+
-+static inline void crisv32_connect_eth_rx_dma(struct crisv32_ethernet_local *np)
-+{
-+ reg_strmux_rw_cfg strmux_cfg;
-+
-+ strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
-+ if (np->eth_inst == regi_eth0)
-+ strmux_cfg.dma1 = regk_strmux_eth0;
-+ else
-+ strmux_cfg.dma7 = regk_strmux_eth1;
-+ REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
-+}
-+
-+static int dma_wait_busy(int inst, int timeout)
-+{
-+ reg_dma_rw_stream_cmd dma_sc;
-+
-+ do {
-+ dma_sc = REG_RD(dma, inst, rw_stream_cmd);
-+ } while (timeout-- > 0 && dma_sc.busy);
-+ return dma_sc.busy;
-+}
-+
-+static int __init crisv32_eth_request_irqdma(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Allocate IRQs and DMAs. */
-+ if (np->eth_inst == regi_eth0) {
-+ if (request_irq(DMA0_INTR_VECT, crisv32tx_eth_interrupt,
-+ 0, "Ethernet TX", dev)) {
-+ return -EAGAIN;
-+ }
-+
-+ if (request_irq(DMA1_INTR_VECT, crisv32rx_eth_interrupt,
-+ 0, "Ethernet RX", dev))
-+ goto err0_1;
-+
-+ if (crisv32_request_dma(0, cardname, DMA_VERBOSE_ON_ERROR,
-+ 12500000, dma_eth0))
-+ goto err0_2;
-+
-+ if (crisv32_request_dma(1, cardname, DMA_VERBOSE_ON_ERROR,
-+ 12500000, dma_eth0))
-+ goto err0_3;
-+
-+ if (request_irq(ETH0_INTR_VECT, crisv32nw_eth_interrupt, 0,
-+ cardname, dev)) {
-+ crisv32_free_dma(1);
-+err0_3:
-+ crisv32_free_dma(0);
-+err0_2:
-+ free_irq(DMA1_INTR_VECT, dev);
-+err0_1:
-+ free_irq(DMA0_INTR_VECT, dev);
-+ return -EAGAIN;
-+ }
-+ } else {
-+ if (request_irq(DMA6_INTR_VECT, crisv32tx_eth_interrupt,
-+ 0, cardname, dev))
-+ return -EAGAIN;
-+
-+ if (request_irq(DMA7_INTR_VECT, crisv32rx_eth_interrupt,
-+ 0, cardname, dev))
-+ goto err1_1;
-+
-+ if (crisv32_request_dma(6, cardname, DMA_VERBOSE_ON_ERROR,
-+ 0, dma_eth1))
-+ goto err1_2;
-+
-+ if (crisv32_request_dma(7, cardname, DMA_VERBOSE_ON_ERROR,
-+ 0, dma_eth1))
-+ goto err1_3;
-+
-+ if (request_irq(ETH1_INTR_VECT, crisv32nw_eth_interrupt, 0,
-+ cardname, dev)) {
-+ crisv32_free_dma(7);
-+err1_3:
-+ crisv32_free_dma(6);
-+err1_2:
-+ free_irq(DMA7_INTR_VECT, dev);
-+err1_1:
-+ free_irq(DMA6_INTR_VECT, dev);
-+ return -EAGAIN;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int __init crisv32_eth_init_phy(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
-+
-+ if (RESET_PHY) {
-+#ifdef CONFIG_ETRAXFS
-+ reg_config_rw_pad_ctrl pad_ctrl;
-+ pad_ctrl = REG_RD(config, regi_config, rw_pad_ctrl);
-+ pad_ctrl.phyrst_n = 0;
-+ REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl);
-+
-+ udelay(500); /* RESET_LEN */
-+
-+ pad_ctrl.phyrst_n = 1;
-+ REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl);
-+#else
-+ reg_eth_rw_gen_ctrl gen_ctrl = REG_RD(eth, np->eth_inst, rw_gen_ctrl);
-+ gen_ctrl.phyrst_n = 0;
-+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+
-+ udelay(500); /* RESET_LEN */
-+
-+ gen_ctrl.phyrst_n = 1;
-+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+#endif
-+
-+ udelay(200); /* RESET_WAIT */
-+ }
-+
-+ switch (PHY_MODE) {
-+ case FALLBACK_PHY:
-+ /* Fall back on using fixed iff there is no PHY on */
-+ /* the MDIO bus */
-+ np->fixed_phy = crisv32_eth_probe_transceiver(dev) != 0;
-+ if (np->fixed_phy)
-+ printk(KERN_WARNING
-+ "eth: No transciever found, falling back "
-+ "to fixed phy mode\n");
-+ break;
-+
-+ case NO_PHY:
-+ /* Don't even bother looking for a PHY, always rely */
-+ /* on fixed PHY */
-+ np->fixed_phy = 1;
-+ break;
-+
-+ default: /* HAVE_PHY */
-+ /* Look for a PHY and abort if there is none, */
-+ /* otherwise just carry on */
-+ if (crisv32_eth_probe_transceiver(dev)) {
-+ printk(KERN_WARNING
-+ "eth: No transceiver found, "
-+ "removing interface\n");
-+ return -ENODEV;
-+ }
-+ np->fixed_phy = 0;
-+ }
-+
-+ if (np->fixed_phy) {
-+ reg_eth_rw_rec_ctrl rec_ctrl;
-+
-+ /* speed */
-+ np->current_speed = 100;
-+ np->current_speed_selection = 100; /* Auto. */
-+
-+ /* duplex */
-+ np->full_duplex = 1;
-+ np->current_duplex = full;
-+
-+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.duplex = regk_eth_full;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ } else {
-+ np->mii_if.supports_gmii = mii_check_gmii_support(&np->mii_if);
-+
-+ /* speed */
-+ np->current_speed = 10;
-+ np->current_speed_selection = 0; /* Auto. */
-+ np->speed_timer = timer_init;
-+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+ np->speed_timer.data = (unsigned long) dev;
-+ np->speed_timer.function = crisv32_eth_check_speed;
-+
-+ /* duplex */
-+ np->full_duplex = 0;
-+ np->current_duplex = autoneg;
-+ np->duplex_timer = timer_init;
-+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+ np->duplex_timer.data = (unsigned long) dev;
-+ np->duplex_timer.function = crisv32_eth_check_duplex;
-+ }
-+
-+ return 0;
-+}
-+
-+static void __init crisv32_eth_setup_controller(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ reg_eth_rw_gen_ctrl gen_ctrl;
-+
-+ reg_eth_rw_tr_ctrl tr_ctrl = {
-+ /* SW retransmits to avoid transmitter bugs. */
-+ .retry = regk_eth_no,
-+ .pad = regk_eth_yes,
-+ .crc = regk_eth_yes
-+ };
-+
-+ reg_eth_rw_rec_ctrl rec_ctrl = {
-+ .ma0 = regk_eth_no, /* enable at open() */
-+ .broadcast = regk_eth_no,
-+ .max_size = regk_eth_size1522
-+ };
-+
-+ reg_eth_rw_ga_lo ga_lo = { 0 };
-+ reg_eth_rw_ga_hi ga_hi = { 0 };
-+
-+ /*
-+ * Initialize group address registers to make sure that no
-+ * unwanted addresses are matched.
-+ */
-+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo);
-+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi);
-+
-+ /* Configure receiver and transmitter */
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
-+
-+ /*
-+ * Read from rw_gen_ctrl so that we don't override any previous
-+ * configuration.
-+ */
-+ gen_ctrl = REG_RD(eth, np->eth_inst, rw_gen_ctrl);
-+ gen_ctrl.phy = regk_eth_mii_clk;
-+#ifdef CONFIG_ETRAXFS
-+ /* On ETRAX FS, this bit has reversed meaning */
-+ gen_ctrl.flow_ctrl = regk_eth_no;
-+#else
-+ gen_ctrl.flow_ctrl = regk_eth_yes;
-+#endif
-+
-+ /* Enable ethernet controller with mii clk. */
-+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+ gen_ctrl.en = regk_eth_yes;
-+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+}
-+
-+static void crisv32_eth_reset_rx_ring(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int i;
-+
-+ /* cleanup the rx-ring */
-+ for (i = 0; i < NBR_RX_DESC; i++) {
-+ struct sk_buff *skb;
-+ skb = np->dma_rx_descr_list[i].skb;
-+ if (!skb
-+ || (np->dma_rx_descr_list[i].descr.buf !=
-+ (void *)virt_to_phys(skb->data))) {
-+ if (skb)
-+ dev_kfree_skb(skb);
-+ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+ np->dma_rx_descr_list[i].skb = skb;
-+ np->dma_rx_descr_list[i].descr.buf =
-+ (char*)virt_to_phys(skb->data);
-+ }
-+ if (np->dma_rx_descr_list[i].descr.in_eop)
-+ np->rx_restarts_dropped++;
-+ np->dma_rx_descr_list[i].descr.after =
-+ (char*)virt_to_phys(skb->data
-+ + MAX_MEDIA_DATA_SIZE);
-+ np->dma_rx_descr_list[i].descr.eol = 0;
-+ np->dma_rx_descr_list[i].descr.in_eop = 0;
-+ /* Workaround cache bug */
-+ flush_dma_descr(&np->dma_rx_descr_list[i].descr, 1);
-+ }
-+
-+ /* reset rx-ring */
-+ np->active_rx_desc = &np->dma_rx_descr_list[0];
-+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1];
-+ np->last_rx_desc = np->prev_rx_desc;
-+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1;
-+ flush_dma_descr(&np->dma_rx_descr_list[NBR_RX_DESC - 1].descr, 0);
-+ /* ready to accept new packets. */
-+ np->new_rx_package = 1;
-+
-+ /* Fill context descriptors. */
-+ np->ctxt_in.next = 0;
-+ np->ctxt_in.saved_data =
-+ (void *)virt_to_phys(&np->active_rx_desc->descr);
-+ np->ctxt_in.saved_data_buf = np->active_rx_desc->descr.buf;
-+}
-+
-+static inline int crisv32_eth_tx_ring_full(struct crisv32_ethernet_local *np)
-+{
-+ crisv32_eth_descr *active = np->active_tx_desc;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ active = phys_to_virt((unsigned long)active->descr.next);
-+#endif
-+ if (active == np->catch_tx_desc)
-+ return 1;
-+ return 0;
-+}
-+
-+static void crisv32_eth_reset_tx_ring(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* free un-handled tx packets */
-+ while (np->txpackets || np->catch_tx_desc != np->active_tx_desc) {
-+ np->txpackets--;
-+ if (np->catch_tx_desc->skb)
-+ dev_kfree_skb(np->catch_tx_desc->skb);
-+
-+ np->catch_tx_desc->skb = 0;
-+ np->catch_tx_desc =
-+ phys_to_virt((int)np->catch_tx_desc->descr.next);
-+ }
-+
-+ WARN_ON(np->txpackets != 0);
-+ np->txpackets = 0;
-+
-+ /* reset tx-ring */
-+ np->dma_tx_descr_list[0].descr.buf =
-+ np->dma_tx_descr_list[0].descr.after = 0;
-+ np->dma_tx_descr_list[0].descr.eol = 1;
-+
-+ np->active_tx_desc = &np->dma_tx_descr_list[0];
-+ np->prev_tx_desc = &np->dma_tx_descr_list[NBR_TX_DESC - 1];
-+ np->catch_tx_desc = &np->dma_tx_descr_list[0];
-+
-+ np->ctxt_out.next = 0;
-+ np->ctxt_out.saved_data =
-+ (void *)virt_to_phys(&np->dma_tx_descr_list[0].descr);
-+
-+}
-+
-+static void crisv32_eth_reset_rings(struct net_device *dev)
-+{
-+ crisv32_eth_reset_tx_ring(dev);
-+ crisv32_eth_reset_rx_ring(dev);
-+}
-+
-+/*
-+ * Really advance the receive ring. RX interrupts must be off.
-+ */
-+static void __crisv32_eth_rx_ring_advance(struct crisv32_ethernet_local *np)
-+{
-+ if (np->newbuf)
-+ np->active_rx_desc->descr.buf = (void *) np->newbuf;
-+ np->active_rx_desc->descr.after =
-+ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE;
-+ np->active_rx_desc->descr.eol = 1;
-+ np->active_rx_desc->descr.in_eop = 0;
-+ np->active_rx_desc = phys_to_virt((int)np->active_rx_desc->descr.next);
-+ barrier();
-+ np->prev_rx_desc->descr.eol = 0;
-+
-+ /* Workaround cache bug. */
-+ flush_dma_descr(&np->prev_rx_desc->descr, 0);
-+ np->prev_rx_desc = phys_to_virt((int)np->prev_rx_desc->descr.next);
-+ flush_dma_descr(&np->prev_rx_desc->descr, 1);
-+}
-+
-+/*
-+ * Advance the receive ring. RX interrupts must be off.
-+ */
-+static inline void
-+crisv32_eth_rx_ring_advance(struct crisv32_ethernet_local *np)
-+{
-+ /*
-+ * When the input DMA reaches eol precaution must be taken, otherwise
-+ * the DMA could stop. The problem occurs if the eol flag is re-placed
-+ * on the descriptor that the DMA stands on before the DMA proceed to
-+ * the next descriptor. This case could, for example, happen if there
-+ * is a traffic burst and then the network goes silent. To prevent this
-+ * we make sure that we do not set the eol flag on the descriptor that
-+ * the DMA stands on.
-+ */
-+ unsigned long dma_pos;
-+
-+ /* Get the current input dma position. */
-+ dma_pos = REG_RD_INT(dma, np->dma_in_inst, rw_saved_data);
-+
-+ if (virt_to_phys(&np->active_rx_desc->descr) != dma_pos) {
-+ crisv32_eth_descr *cur, *nxt;
-+
-+ /* Now really advance the ring one step. */
-+ __crisv32_eth_rx_ring_advance(np);
-+
-+ cur = np->active_rx_desc;
-+ nxt = (void *)phys_to_virt((unsigned long)cur->descr.next);
-+ flush_dma_descr(&cur->descr, 0);
-+ flush_dma_descr(&nxt->descr, 0);
-+ if (!cur->descr.in_eop && nxt->descr.in_eop) {
-+ /* TODO: Investigate this more. The DMA seems to have
-+ skipped a descriptor, possibly due to incoherence
-+ between the CPU L1 cache and the DMA updates to the
-+ descriptor. */
-+ np->newbuf = (unsigned long) np->active_rx_desc->descr.buf;
-+ __crisv32_eth_rx_ring_advance(np);
-+ }
-+ /* flush after peek. */
-+ flush_dma_descr(&cur->descr, 0);
-+ flush_dma_descr(&nxt->descr, 0);
-+ } else {
-+ /* delay the advancing of the ring. */
-+ np->new_rx_package = 0;
-+ }
-+}
-+
-+static void __init crisv32_eth_init_rings(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int i;
-+
-+ /* Initialise receive descriptors for interface. */
-+ for (i = 0; i < NBR_RX_DESC; i++) {
-+ struct sk_buff *skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+
-+ np->dma_rx_descr_list[i].skb = skb;
-+ np->dma_rx_descr_list[i].descr.buf =
-+ (char*)virt_to_phys(skb->data);
-+ np->dma_rx_descr_list[i].descr.after =
-+ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE);
-+
-+ np->dma_rx_descr_list[i].descr.eol = 0;
-+ np->dma_rx_descr_list[i].descr.in_eop = 0;
-+ np->dma_rx_descr_list[i].descr.next =
-+ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr);
-+ }
-+ /* bend the list into a ring */
-+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next =
-+ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr);
-+
-+ /* Initialize transmit descriptors. */
-+ for (i = 0; i < NBR_TX_DESC; i++) {
-+ np->dma_tx_descr_list[i].descr.wait = 1;
-+ np->dma_tx_descr_list[i].descr.eol = 0;
-+ np->dma_tx_descr_list[i].descr.out_eop = 0;
-+ np->dma_tx_descr_list[i].descr.next =
-+ (void*)virt_to_phys(&np->dma_tx_descr_list[i+1].descr);
-+ }
-+ /* bend the list into a ring */
-+ np->dma_tx_descr_list[NBR_TX_DESC - 1].descr.next =
-+ (void *) virt_to_phys(&np->dma_tx_descr_list[0].descr);
-+
-+ crisv32_eth_reset_rings(dev);
-+}
-+
-+static void __init crisv32_init_leds(int ledgrp, struct net_device *dev)
-+{
-+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Use already allocated led grp if initialized */
-+ if (crisv32_leds[ledgrp] != NULL) {
-+ np->leds = crisv32_leds[ledgrp];
-+ return;
-+ }
-+
-+ crisv32_leds[ledgrp] =
-+ kmalloc(sizeof(struct crisv32_eth_leds), GFP_KERNEL);
-+
-+ crisv32_leds[ledgrp]->ledgrp = ledgrp;
-+ crisv32_leds[ledgrp]->led_active = 0;
-+ crisv32_leds[ledgrp]->ifisup[0] = 0;
-+ crisv32_leds[ledgrp]->ifisup[1] = 0;
-+ /* NOTE: Should this value be set to zero as the jiffies timer
-+ can wrap? */
-+ crisv32_leds[ledgrp]->led_next_time = jiffies;
-+
-+ crisv32_leds[ledgrp]->clear_led_timer = timer_init;
-+ crisv32_leds[ledgrp]->clear_led_timer.function =
-+ crisv32_clear_network_leds;
-+ crisv32_leds[ledgrp]->clear_led_timer.data = (unsigned long) dev;
-+
-+ spin_lock_init(&crisv32_leds[ledgrp]->led_lock);
-+
-+ np->leds = crisv32_leds[ledgrp];
-+}
-+
-+static int __init crisv32_ethernet_init(void)
-+{
-+ struct crisv32_ethernet_local *np;
-+ int ret = 0;
-+
-+#ifdef CONFIG_ETRAXFS
-+ printk("ETRAX FS 10/100MBit ethernet v0.01 (c)"
-+ " 2003 Axis Communications AB\n");
-+#else
-+ printk("ARTPEC-3 10/100 MBit ethernet (c)"
-+ " 2003-2009 Axis Communications AB\n");
-+#endif
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ {
-+ reg_clkgen_rw_clk_ctrl clk_ctrl = REG_RD(clkgen, regi_clkgen,
-+ rw_clk_ctrl);
-+ clk_ctrl.eth = clk_ctrl.dma0_1_eth = regk_clkgen_yes;
-+ REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
-+ }
-+#endif
-+{
-+ int iface0 = 0;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ if (crisv32_pinmux_alloc_fixed(pinmux_eth))
-+ panic("Eth pinmux\n");
-+#endif
-+
-+ if (!(crisv32_dev[iface0] = alloc_etherdev(sizeof *np)))
-+ return -ENOMEM;
-+
-+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface0]);
-+
-+#if defined(CONFIG_ETRAX_ETH0_USE_LEDGRP0)
-+ crisv32_init_leds(CRIS_LED_GRP_0,crisv32_dev[iface0]);
-+#elif defined(CONFIG_ETRAX_ETH0_USE_LEDGRP1)
-+ crisv32_init_leds(CRIS_LED_GRP_1,crisv32_dev[iface0]);
-+#else
-+ crisv32_init_leds(CRIS_LED_GRP_NONE,crisv32_dev[iface0]);
-+#endif
-+
-+ np = (struct crisv32_ethernet_local *) netdev_priv(crisv32_dev[iface0]);
-+ np->eth_inst = regi_eth0;
-+ np->dma_out_inst = regi_dma0;
-+ np->dma_in_inst = regi_dma1;
-+
-+ np->mii_if.dev = crisv32_dev[iface0];
-+ np->mii_if.mdio_read = crisv32_eth_get_mdio_reg;
-+ np->mii_if.mdio_write = crisv32_eth_set_mdio_reg;
-+ np->mii_if.phy_id_mask = 0x1f;
-+ np->mii_if.reg_num_mask = 0x1f;
-+
-+ np->use_leds = 1;
-+ np->autoneg_normal = 1;
-+
-+
-+ register_netdev(crisv32_dev[iface0]);
-+
-+ /* Set up default MAC address */
-+ memcpy(crisv32_dev[iface0]->dev_addr, default_mac_iface0.sa_data, 6);
-+ crisv32_eth_set_mac_address(crisv32_dev[iface0], &default_mac_iface0);
-+ if (crisv32_eth_request_irqdma(crisv32_dev[iface0]))
-+ printk("%s: eth0 unable to allocate IRQ and DMA resources\n",
-+ __func__);
-+ np->txpackets = 0;
-+ crisv32_eth_init_rings(crisv32_dev[iface0]);
-+ crisv32_eth_setup_controller(crisv32_dev[iface0]);
-+ ret |= crisv32_eth_init_phy(crisv32_dev[iface0]);
-+ if (ret) {
-+ unregister_netdev(crisv32_dev[iface0]);
-+ return ret;
-+ }
-+}
-+
-+#ifdef CONFIG_ETRAX_ETHERNET_IFACE1
-+{
-+ int iface1 = 0;
-+ /* Default MAC address for interface 1.
-+ * The real one will be set later. */
-+ static struct sockaddr default_mac_iface1 =
-+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x01}};
-+
-+ if (crisv32_pinmux_alloc_fixed(pinmux_eth1))
-+ panic("Eth pinmux\n");
-+
-+ /* Increase index to device array if interface 0 is enabled as well.*/
-+#ifdef CONFIG_ETRAX_ETHERNET_IFACE0
-+ iface1++;
-+#endif
-+ if (!(crisv32_dev[iface1] = alloc_etherdev(sizeof *np)))
-+ return -ENOMEM;
-+
-+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface1]);
-+
-+#if defined(CONFIG_ETRAX_ETH1_USE_LEDGRP0)
-+ crisv32_init_leds(CRIS_LED_GRP_0,crisv32_dev[iface1]);
-+#elif defined(CONFIG_ETRAX_ETH1_USE_LEDGRP1)
-+ crisv32_init_leds(CRIS_LED_GRP_1,crisv32_dev[iface1]);
-+#else
-+ crisv32_init_leds(CRIS_LED_GRP_NONE,crisv32_dev[iface1]);
-+#endif
-+
-+ np = (struct crisv32_ethernet_local *) netdev_priv(crisv32_dev[iface1]);
-+ np->eth_inst = regi_eth1;
-+ np->dma_out_inst = regi_dma6;
-+ np->dma_in_inst = regi_dma7;
-+
-+ np->mii_if.dev = crisv32_dev[iface1];
-+ np->mii_if.mdio_read = crisv32_eth_get_mdio_reg;
-+ np->mii_if.mdio_write = crisv32_eth_set_mdio_reg;
-+ np->mii_if.phy_id_mask = 0x1f;
-+ np->mii_if.reg_num_mask = 0x1f;
-+
-+
-+ register_netdev(crisv32_dev[iface1]);
-+
-+ /* Set up default MAC address */
-+ memcpy(crisv32_dev[iface1]->dev_addr, default_mac_iface1.sa_data, 6);
-+ crisv32_eth_set_mac_address(crisv32_dev[iface1], &default_mac_iface1);
-+
-+ if (crisv32_eth_request_irqdma(crisv32_dev[iface1]))
-+ printk("%s: eth1 unable to allocate IRQ and DMA resources\n",
-+ __func__);
-+ np->txpackets = 0;
-+ crisv32_eth_init_rings(crisv32_dev[iface1]);
-+ crisv32_eth_setup_controller(crisv32_dev[iface1]);
-+ ret |= crisv32_eth_init_phy(crisv32_dev[iface1]);
-+ if (ret) {
-+ unregister_netdev(crisv32_dev[iface1]);
-+ return ret;
-+ }
-+}
-+#endif /* CONFIG_ETRAX_ETHERNET_IFACE1 */
-+
-+#ifdef CONFIG_CPU_FREQ
-+ cpufreq_register_notifier(&crisv32_ethernet_freq_notifier_block,
-+ CPUFREQ_TRANSITION_NOTIFIER);
-+#endif
-+
-+ return ret;
-+}
-+
-+static struct net_device_ops crisv32_netdev_ops = {
-+ .ndo_open = crisv32_eth_open,
-+ .ndo_stop = crisv32_eth_close,
-+ .ndo_start_xmit = crisv32_eth_send_packet,
-+ .ndo_set_rx_mode = crisv32_eth_set_rx_mode,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_set_mac_address = crisv32_eth_set_mac_address,
-+ .ndo_do_ioctl =crisv32_eth_ioctl,
-+ .ndo_get_stats = crisv32_get_stats,
-+ .ndo_tx_timeout = crisv32_eth_do_tx_recovery,
-+ .ndo_set_config = crisv32_eth_set_config,
-+};
-+
-+static int __init crisv32_ethernet_device_init(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np;
-+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
-+
-+ dev->base_addr = 0; /* Just to have something to show. */
-+
-+ /* we do our own locking */
-+ dev->features |= NETIF_F_LLTX;
-+
-+ /* We use several IRQs and DMAs so just report 0 here. */
-+ dev->irq = 0;
-+ dev->dma = 0;
-+
-+ /*
-+ * Fill in our handlers so the network layer can talk to us in the
-+ * future.
-+ */
-+ dev->netdev_ops = &crisv32_netdev_ops;
-+ dev->ethtool_ops = &crisv32_ethtool_ops;
-+ dev->watchdog_timeo = HZ * 10;
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+ dev->poll_controller = crisv32_netpoll;
-+#endif
-+ np = netdev_priv(dev);
-+ np->dev = dev;
-+
-+ /*
-+ * 8 skbs keeps the system very reponsive even under high load.
-+ * At 64 the system locks, pretty much the same way as without NAPI.
-+ *
-+ * TODO: meassure with 2 interfaces
-+ */
-+ netif_napi_add(dev, &np->napi, crisv32_eth_poll, 8);
-+
-+ spin_lock_init(&np->lock);
-+ spin_lock_init(&np->transceiver_lock);
-+
-+ np->receive_timer = timer_init;
-+ np->receive_timer.data = (unsigned)dev;
-+ np->receive_timer.function = receive_timeout;
-+
-+ INIT_WORK(&np->receive_work, receive_timeout_work);
-+
-+ np->transmit_timer = timer_init;
-+ np->transmit_timer.data = (unsigned)dev;
-+ np->transmit_timer.function = transmit_timeout;
-+
-+ return 0;
-+}
-+
-+static int crisv32_eth_open(struct net_device *dev)
-+{
-+ struct sockaddr mac_addr;
-+ reg_dma_rw_ack_intr ack_intr = { .data = 1, .in_eop = 1 };
-+ reg_eth_rw_clr_err clr_err = {.clr = regk_eth_yes};
-+ /*
-+ * dont interrupt us at any stat counter thresholds, only at urun
-+ * and exc_col.
-+ */
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ /* For Artpec-3 we use overrun to workaround voodoo TR 87 */
-+ int intr_mask_nw = 0x1c00;
-+#else
-+ int intr_mask_nw = 0x1800;
-+#endif
-+ int eth_ack_intr = 0xffff;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->lock);
-+ crisv32_eth_set_gigabit(np, 0);
-+
-+ crisv32_disable_tx_ints(np);
-+ crisv32_disable_rx_ints(np);
-+
-+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
-+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, eth_ack_intr);
-+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw);
-+ crisv32_eth_reset_rings(dev);
-+
-+ /* Give the hardware an idea of what MAC address we want. */
-+ memcpy(mac_addr.sa_data, dev->dev_addr, dev->addr_len);
-+ crisv32_eth_set_mac_address(dev, &mac_addr);
-+
-+ /* Enable irq and make sure that the irqs are cleared. */
-+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+ crisv32_disconnect_eth_rx_dma(np);
-+
-+ /* Prepare input DMA. */
-+ DMA_RESET(np->dma_in_inst);
-+ DMA_ENABLE(np->dma_in_inst);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2);
-+#endif
-+ DMA_START_CONTEXT(np->dma_in_inst, virt_to_phys(&np->ctxt_in));
-+ DMA_CONTINUE(np->dma_in_inst);
-+ crisv32_enable_rx_ints(np);
-+ crisv32_start_receiver(np);
-+
-+ /* Prepare output DMA. */
-+ DMA_RESET(np->dma_out_inst);
-+ DMA_ENABLE(np->dma_out_inst);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4);
-+#endif
-+ crisv32_connect_eth_rx_dma(np);
-+
-+ netif_start_queue(dev);
-+ crisv32_enable_tx_ints(np);
-+
-+ if (!np->fixed_phy) {
-+ /* Start duplex/speed timers */
-+ if (!timer_pending(&np->speed_timer))
-+ add_timer(&np->speed_timer);
-+ if (!timer_pending(&np->duplex_timer))
-+ add_timer(&np->duplex_timer);
-+ }
-+
-+ spin_unlock(&np->lock);
-+ /*
-+ * We are now ready to accept transmit requests from the queueing
-+ * layer of the networking.
-+ */
-+ np->link = 1;
-+ netif_carrier_on(dev);
-+ napi_enable(&np->napi);
-+
-+ return 0;
-+}
-+
-+static int crisv32_eth_close(struct net_device *dev)
-+{
-+ reg_dma_rw_ack_intr ack_intr = {0};
-+
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ del_timer(&np->transmit_timer);
-+ spin_lock_irqsave(&np->lock, flags);
-+
-+ /* stop the receiver before the DMA channels to avoid overruns. */
-+ crisv32_disable_rx_ints(np);
-+ napi_disable(&np->napi);
-+ crisv32_stop_receiver(np);
-+
-+ netif_stop_queue(dev);
-+
-+ /* Reset the TX DMA in case it has hung on something. */
-+ DMA_RESET(np->dma_in_inst);
-+
-+ /* Stop DMA */
-+ DMA_STOP(np->dma_in_inst);
-+ DMA_STOP(np->dma_out_inst);
-+
-+ /* Disable irq and make sure that the irqs are cleared. */
-+ crisv32_disable_tx_ints(np);
-+ ack_intr.data = 1;
-+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
-+
-+ ack_intr.in_eop = 1;
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+ np->sender_started = 0;
-+ spin_unlock_irqrestore(&np->lock, flags);
-+
-+ /* Update the statistics. */
-+ update_rx_stats(np);
-+ update_tx_stats(np);
-+
-+ if (!np->fixed_phy) {
-+ /* Stop speed/duplex timers */
-+ del_timer(&np->speed_timer);
-+ del_timer(&np->duplex_timer);
-+ }
-+
-+ return 0;
-+}
-+
-+static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr)
-+{
-+ int i;
-+ static int first = 1;
-+
-+ unsigned char *addr = ((struct sockaddr*)vpntr)->sa_data;
-+
-+ reg_eth_rw_ma0_lo ma0_lo =
-+ { addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24)};
-+
-+ reg_eth_rw_ma0_hi ma0_hi = { addr[4] | (addr[5] << 8) };
-+
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Remember the address. */
-+ memcpy(dev->dev_addr, addr, dev->addr_len);
-+
-+ /*
-+ * Write the address to the hardware.
-+ * Note the way the address is wrapped:
-+ * ma0_l0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24);
-+ * ma0_hi = a0_4 | (a0_5 << 8);
-+ */
-+ REG_WR(eth, np->eth_inst, rw_ma0_lo, ma0_lo);
-+ REG_WR(eth, np->eth_inst, rw_ma0_hi, ma0_hi);
-+
-+ if (first) {
-+ printk(KERN_INFO "%s: changed MAC to ", dev->name);
-+
-+ for (i = 0; i < 5; i++)
-+ printk("%02X:", dev->dev_addr[i]);
-+ printk("%02X\n", dev->dev_addr[i]);
-+
-+ first = 0;
-+ }
-+
-+ return 0;
-+}
-+
-+static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ reg_dma_r_masked_intr masked_in;
-+
-+ masked_in = REG_RD(dma, np->dma_in_inst, r_masked_intr);
-+
-+ if (masked_in.in_eop) {
-+ reg_dma_rw_ack_intr ack_intr = {0};
-+
-+ /*
-+ * Ack the rx irq even if we are not prepared to start
-+ * polling. This is needed to handle incomming packets
-+ * during the stop sequence.
-+ */
-+ ack_intr.in_eop = 1;
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+ mod_timer(&np->receive_timer, jiffies + HZ);
-+ np->do_rx_recovery = 0;
-+
-+ if (napi_schedule_prep(&np->napi)) {
-+ crisv32_disable_rx_ints(np);
-+ crisv32_disable_tx_ints(np);
-+ /* put us onto the poll list */
-+ __napi_schedule(&np->napi);
-+ }
-+ } else {
-+ /* Unexpected, ACK it and hope for the best. */
-+ reg_dma_rw_ack_intr ack_intr = {
-+ .group = 1,
-+ .ctxt = 1,
-+ .data = 1,
-+ .in_eop = 0,
-+ .stream_cmd = 1,
-+ .dummy1 = ~0
-+ };
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static inline void crisv32_eth_roll_tx_timer(struct crisv32_ethernet_local *np)
-+{
-+ /* If there are more packets in the ring, roll the tx timer. */
-+ if (np->txpackets) {
-+ /* Eth pause frames may halt us for up to 320ms (100mbit). */
-+ unsigned long timeout = jiffies + (HZ / 3) + 1;
-+ mod_timer(&np->transmit_timer, timeout);
-+ }
-+ else
-+ del_timer(&np->transmit_timer);
-+}
-+
-+/* Call with np->lock held. */
-+static void _crisv32_tx_ring_advance(struct crisv32_ethernet_local *np,
-+ int cleanup)
-+{
-+ reg_dma_rw_stat stat;
-+ dma_descr_data *dma_pos;
-+ struct net_device *dev = np->dev;
-+ int eol;
-+
-+ /* Get the current output dma position. */
-+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data));
-+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+ eol = stat.list_state == regk_dma_data_at_eol;
-+ if (cleanup || eol)
-+ dma_pos = &np->active_tx_desc->descr;
-+
-+ /* Take care of transmited dma descriptors and report sent packet. */
-+ while (np->txpackets && (&np->catch_tx_desc->descr != dma_pos)) {
-+ /* Update sent packet statistics. */
-+ np->stats.tx_bytes += np->catch_tx_desc->skb->len;
-+ np->stats.tx_packets++;
-+
-+ dev_kfree_skb_any(np->catch_tx_desc->skb);
-+ np->catch_tx_desc->skb = 0;
-+ np->txpackets--;
-+ np->catch_tx_desc->descr.buf = 0;
-+ np->catch_tx_desc =
-+ phys_to_virt((int)np->catch_tx_desc->descr.next);
-+ np->do_tx_recovery = 0;
-+ np->retrans = 0;
-+
-+ netif_wake_queue(dev);
-+ }
-+}
-+
-+static inline void crisv32_tx_ring_advance(struct crisv32_ethernet_local *np)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&np->lock, flags);
-+ _crisv32_tx_ring_advance(np, 0);
-+ crisv32_eth_roll_tx_timer(np);
-+ spin_unlock_irqrestore(&np->lock, flags);
-+}
-+
-+static inline int crisv32_tx_complete(struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_ack_intr ack_intr = { .data = 1 };
-+ reg_dma_r_intr ints;
-+ int r = 0;
-+
-+ /* We are interested in the unmasked raw interrupt source here. When
-+ polling with tx interrupts masked off we still want to do
-+ tx completition when the DMA makes progress. */
-+ ints = REG_RD(dma, np->dma_out_inst, r_intr);
-+ if (ints.data)
-+ {
-+ /* ack the interrupt, if it was active */
-+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
-+ crisv32_tx_ring_advance(np);
-+ r = 1;
-+ }
-+ return r;
-+}
-+
-+static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev_id);
-+
-+ crisv32_tx_complete(np);
-+ return IRQ_HANDLED;
-+}
-+
-+
-+/* Update receive errors. */
-+static void
-+update_rx_stats(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rs_rec_cnt r;
-+
-+ r = REG_RD(eth, np->eth_inst, rs_rec_cnt);
-+
-+ np->stats.rx_over_errors += r.congestion;
-+ np->stats.rx_crc_errors += r.crc_err;
-+ np->stats.rx_frame_errors += r.align_err;
-+ np->stats.rx_length_errors += r.oversize;
-+ np->stats.rx_errors += r.crc_err + r.align_err +
-+ r.oversize + r.congestion;
-+}
-+
-+/* Update transmit errors. */
-+static void update_tx_stats(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rs_tr_cnt r;
-+ reg_eth_rs_phy_cnt rp;
-+
-+ r = REG_RD(eth, np->eth_inst, rs_tr_cnt);
-+ rp = REG_RD(eth, np->eth_inst, rs_phy_cnt);
-+
-+ /* r.deferred is not good for counting collisions because it also
-+ includes frames that have to wait for the interframe gap. That
-+ means we get deferred frames even when in full duplex.
-+ Here we don't actually count the number of collisions that
-+ occured (artpec3 seems to lack such a counter), instead we count
-+ the number of frames that collide once or more. */
-+ np->stats.collisions += r.mult_col + r.single_col;
-+ np->stats.tx_window_errors += r.late_col;
-+ np->stats.tx_carrier_errors += rp.carrier_loss;
-+
-+ /* Ordinary collisions are not errors, they are just part of
-+ ethernet's bus arbitration and congestion control mechanisms.
-+ Late collisions are serious errors though. */
-+ np->stats.tx_errors += r.late_col;
-+}
-+
-+/* Get current statistics. */
-+static struct net_device_stats *crisv32_get_stats(struct net_device *dev)
-+{
-+ unsigned long flags;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ spin_lock_irqsave(&np->lock, flags);
-+
-+ update_rx_stats(np);
-+ update_tx_stats(np);
-+
-+ spin_unlock_irqrestore(&np->lock, flags);
-+
-+ return &np->stats;
-+}
-+
-+/* Check for network errors. This acknowledge the received interrupt. */
-+static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ reg_eth_r_masked_intr intr_mask;
-+ int ack_intr = 0xffff;
-+ reg_eth_rw_clr_err clr_err;
-+
-+ intr_mask = REG_RD(eth, np->eth_inst, r_masked_intr);
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ /* Only apply the workaround if it is not already pending.
-+ enable_eth_ints will re-enable the orun interrupt regardless
-+ of pending_overrun. */
-+ if (intr_mask.orun && !np->pending_overrun) {
-+ reg_eth_rw_rec_ctrl rec_ctrl =
-+ REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ np->saved_rec_ctrl = rec_ctrl;
-+ np->overrun_set = 1;
-+ DMA_STOP(np->dma_in_inst);
-+ rec_ctrl.ma0 = regk_eth_no;
-+ rec_ctrl.broadcast = regk_eth_no;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ np->saved_ga_lo = REG_RD_INT(eth, np->eth_inst, rw_ga_lo);
-+ np->saved_ga_hi = REG_RD_INT(eth, np->eth_inst, rw_ga_hi);
-+ REG_WR_INT(eth, np->eth_inst, rw_ga_lo, 0);
-+ REG_WR_INT(eth, np->eth_inst, rw_ga_hi, 0);
-+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask,
-+ REG_RD_INT(eth, np->eth_inst, rw_intr_mask) & 0xfbff);
-+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, 0x400);
-+ intr_mask.orun = 0;
-+ np->pending_overrun = 1;
-+ if (!np->napi_processing)
-+ crisv32_eth_restart_rx_dma(np->dev, np);
-+
-+ return IRQ_HANDLED;
-+ }
-+#endif
-+
-+ /*
-+ * Check for underrun and/or excessive collisions. Note that the
-+ * rw_clr_err register clears both underrun and excessive collision
-+ * errors, so there's no need to check them separately.
-+ */
-+ if (np->sender_started
-+ && (intr_mask.urun || intr_mask.exc_col)) {
-+ unsigned long flags;
-+
-+ /* Underrun are considered to be tx-errors. */
-+ np->stats.tx_errors += intr_mask.urun;
-+ np->stats.tx_fifo_errors += intr_mask.urun;
-+
-+ /*
-+ * Protect against the tx-interrupt messing with
-+ * the tx-ring.
-+ */
-+ spin_lock_irqsave(&np->lock, flags);
-+
-+ /* DMA should have stopped now, eat from the ring before
-+ removing anything due to tx errors. */
-+ _crisv32_tx_ring_advance(np, 0);
-+
-+ /*
-+ * Drop packets after 15 retries.
-+ * TODO: Add backoff.
-+ */
-+ if (np->retrans > 15 && np->txpackets) {
-+ dev_kfree_skb_irq(np->catch_tx_desc->skb);
-+ np->catch_tx_desc->skb = 0;
-+ np->catch_tx_desc->descr.buf = 0;
-+ np->catch_tx_desc =
-+ phys_to_virt((int)
-+ np->catch_tx_desc->descr.next);
-+ flush_dma_descr(&np->catch_tx_desc->descr, 0);
-+
-+ np->txpackets--;
-+ np->retrans = 0;
-+ netif_wake_queue(dev);
-+ np->stats.tx_dropped++;
-+ }
-+ np->ctxt_out.next = 0;
-+ if (np->txpackets) {
-+ np->retrans++;
-+ np->ctxt_out.saved_data = (void *)
-+ virt_to_phys(&np->catch_tx_desc->descr);
-+ np->ctxt_out.saved_data_buf =
-+ np->catch_tx_desc->descr.buf;
-+ WARN_ON(!np->ctxt_out.saved_data_buf);
-+ flush_dma_descr(&np->catch_tx_desc->descr, 0);
-+ cris_flush_cache_range(&np->ctxt_out,
-+ sizeof np->ctxt_out);
-+
-+ /* restart the DMA */
-+ DMA_START_CONTEXT(np->dma_out_inst,
-+ (int) virt_to_phys(&np->ctxt_out));
-+ np->sender_started = 1;
-+ }
-+ else {
-+ /* Load dummy context but do not load the data
-+ descriptor nor start the burst. This brings the
-+ buggy eth transmitter back in sync with the DMA
-+ avoiding malformed frames. */
-+ REG_WR(dma, np->dma_out_inst, rw_group_down,
-+ (int) virt_to_phys(&np->ctxt_out));
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
-+ np->sender_started = 0;
-+ }
-+ crisv32_eth_roll_tx_timer(np);
-+ spin_unlock_irqrestore(&np->lock, flags);
-+ }
-+
-+ ack_intr = *(u32 *)&intr_mask;
-+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr);
-+ clr_err.clr = 1;
-+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
-+
-+ update_rx_stats(np);
-+ update_tx_stats(np);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/* We have a good packet(s), get it/them out of the buffers. */
-+static int crisv32_eth_receive_packet(struct net_device *dev)
-+{
-+ int length;
-+ struct sk_buff *skb;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ struct sk_buff *tmp;
-+ unsigned long flags;
-+
-+ DEBUG(printk("crisv32_receive_packet\n"));
-+
-+ /* Roll the rx bug timer. */
-+ mod_timer(&np->receive_timer, jiffies + HZ);
-+
-+ /* Activate LED */
-+ spin_lock_irqsave(&np->leds->led_lock, flags);
-+ if (!np->leds->led_active && time_after(jiffies,
-+ np->leds->led_next_time)) {
-+ /* light the network leds depending on the current speed. */
-+ crisv32_set_network_leds(CRIS_LED_ACTIVITY, dev);
-+
-+ /* Set the earliest time we may clear the LED */
-+ np->leds->led_next_time = jiffies + NET_FLASH_TIME;
-+ np->leds->led_active = 1;
-+ np->leds->clear_led_timer.data = (unsigned long) dev;
-+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10);
-+ }
-+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+
-+ /* Discard CRC (4 bytes). */
-+ length = (np->active_rx_desc->descr.after) -
-+ (np->active_rx_desc->descr.buf) - 4;
-+
-+ tmp = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+ if (!tmp) {
-+ np->stats.rx_errors++;
-+ printk(KERN_NOTICE "%s: memory squeeze,"
-+ " dropping packet.",
-+ dev->name);
-+ return 0;
-+ }
-+ skb = np->active_rx_desc->skb;
-+ np->active_rx_desc->skb = tmp;
-+ skb_put(skb, length);
-+
-+ np->newbuf = virt_to_phys(np->active_rx_desc->skb->data);
-+
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ skb->ip_summed = CHECKSUM_NONE;
-+
-+ np->stats.multicast += skb->pkt_type == PACKET_MULTICAST;
-+ /* Send the packet to the upper layer. */
-+ netif_receive_skb(skb);
-+ np->last_rx_desc =
-+ phys_to_virt((int)
-+ np->last_rx_desc->descr.next);
-+
-+ /* Forward rotate the receive ring. */
-+ crisv32_eth_rx_ring_advance(np);
-+ return length;
-+}
-+
-+/* Must be called with the np-lock held. */
-+static void
-+__crisv32_eth_restart_rx_dma(struct net_device* dev,
-+ struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_ack_intr ack_intr = {0};
-+ reg_dma_rw_stream_cmd dma_sc = {0};
-+ reg_dma_rw_stat stat;
-+ int resets = 0;
-+ reg_eth_rw_intr_mask eth_intr_mask;
-+
-+ np->rx_dma_restarts++;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ if (np->pending_overrun) {
-+ np->pending_overrun = 0;
-+ REG_WR_INT(eth, np->eth_inst, rw_ga_lo, np->saved_ga_lo);
-+ REG_WR_INT(eth, np->eth_inst, rw_ga_hi, np->saved_ga_hi);
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, np->saved_rec_ctrl);
-+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask,
-+ REG_RD_INT(eth, regi_eth, rw_intr_mask) | 0x400);
-+ DMA_CONTINUE(np->dma_in_inst);
-+ }
-+#endif
-+ /* Bring down the receiver. */
-+ crisv32_disable_rx_ints(np);
-+ crisv32_disconnect_eth_rx_dma(np);
-+
-+ /* Stop DMA and ack possible ints. */
-+ DMA_STOP(np->dma_in_inst);
-+ ack_intr.in_eop = 1;
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+ crisv32_stop_receiver(np);
-+
-+ /* Disable overrun interrupts while receive is shut off. */
-+ eth_intr_mask = REG_RD(eth, np->eth_inst, rw_intr_mask);
-+ eth_intr_mask.orun = regk_eth_no;
-+ REG_WR(eth, np->eth_inst, rw_intr_mask, eth_intr_mask);
-+ /* ACK overrun. */
-+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, 0x400);
-+
-+ crisv32_eth_reset_rx_ring(dev);
-+ reset:
-+ /* TODO: if nr resets grows to high we should reboot. */
-+ if (resets++ > 0)
-+ printk("reset DMA %d.\n", resets);
-+
-+ DMA_RESET(np->dma_in_inst);
-+ /* Wait for the channel to reset. */
-+ do {
-+ stat = REG_RD(dma, np->dma_in_inst, rw_stat);
-+ } while (stat.mode != regk_dma_rst);
-+
-+ /* Now bring the rx path back up. */
-+ DMA_ENABLE(np->dma_in_inst);
-+ if (dma_wait_busy(np->dma_in_inst, 100))
-+ goto reset;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+// DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2);
-+ dma_sc.cmd = (regk_dma_set_w_size2);
-+ REG_WR(dma, np->dma_in_inst, rw_stream_cmd, dma_sc);
-+ if (dma_wait_busy(np->dma_in_inst, 100))
-+ goto reset;
-+#endif
-+
-+// DMA_START_CONTEXT(np->dma_in_inst, virt_to_phys(&np->ctxt_in));
-+ REG_WR_INT(dma, np->dma_in_inst, rw_group_down, (int)&np->ctxt_in);
-+
-+// DMA_WR_CMD(np->dma_in_inst, regk_dma_load_c);
-+ dma_sc.cmd = (regk_dma_load_c);
-+ REG_WR(dma, np->dma_in_inst, rw_stream_cmd, dma_sc);
-+ if (dma_wait_busy(np->dma_in_inst, 100))
-+ goto reset;
-+
-+// DMA_WR_CMD(np->dma_in_inst, regk_dma_load_d | regk_dma_burst);
-+ dma_sc.cmd = (regk_dma_load_d | regk_dma_burst);
-+ REG_WR(dma, np->dma_in_inst, rw_stream_cmd, dma_sc);
-+
-+ if (dma_wait_busy(np->dma_in_inst, 100))
-+ goto reset;
-+
-+ /* Now things get critical again. Don't give us any interrupts until
-+ the following sequence is complete. */
-+ DMA_CONTINUE(np->dma_in_inst);
-+ np->overrun_set = 0;
-+ crisv32_enable_rx_ints(np);
-+ crisv32_start_receiver(np);
-+
-+ /* Reenable overrun interrupts when receive is started again. */
-+ eth_intr_mask = REG_RD(eth, np->eth_inst, rw_intr_mask);
-+ eth_intr_mask.orun = regk_eth_yes;
-+ REG_WR(eth, np->eth_inst, rw_intr_mask, eth_intr_mask);
-+
-+ crisv32_connect_eth_rx_dma(np);
-+}
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+static void
-+crisv32_eth_restart_rx_dma(struct net_device* dev,
-+ struct crisv32_ethernet_local *np)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&np->lock, flags);
-+ __crisv32_eth_restart_rx_dma(dev, np);
-+ spin_unlock_irqrestore(&np->lock, flags);
-+}
-+#endif
-+
-+/*
-+ * Is there work to do in the rx-path?
-+ */
-+static inline int crisv32_has_rx_work(struct crisv32_ethernet_local *np,
-+ dma_descr_data *active)
-+{
-+ int mw;
-+ mw = (active->in_eop && np->new_rx_package);
-+ return mw;
-+}
-+
-+static void crisv32_eth_do_rx_recovery(struct net_device* dev,
-+ struct crisv32_ethernet_local *np)
-+{
-+ unsigned long flags;
-+ static int r = 0;
-+
-+ r++;
-+
-+ /* Bring down the receiver. */
-+ spin_lock_irqsave(&np->lock, flags);
-+ if (!np->do_rx_recovery)
-+ goto done;
-+
-+ napi_disable(&np->napi);
-+
-+ np->rx_dma_timeouts++;
-+
-+ __crisv32_eth_restart_rx_dma(dev, np);
-+
-+ np->do_rx_recovery = 0;
-+
-+ napi_enable(&np->napi);
-+ done:
-+ spin_unlock_irqrestore(&np->lock, flags);
-+
-+ WARN_ON(r != 1);
-+ r--;
-+}
-+
-+static void receive_timeout_work(struct work_struct* work)
-+{
-+ struct dma_descr_data* descr;
-+ struct dma_descr_data* descr2;
-+ struct net_device* dev = crisv32_dev[0];
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ reg_eth_r_intr intr_mask;
-+
-+ descr = &np->active_rx_desc->descr;
-+ descr2 = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data));
-+
-+ intr_mask = REG_RD(eth, np->eth_inst, r_intr);
-+
-+ if (!np->overrun_set
-+ && !intr_mask.orun
-+ && !descr->in_eop
-+ && !descr2->in_eop)
-+ return;
-+
-+ crisv32_eth_do_rx_recovery(dev, np);
-+}
-+
-+static void receive_timeout(unsigned long arg)
-+{
-+ struct net_device* dev = (struct net_device*)arg;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ np->do_rx_recovery++;
-+ schedule_work(&np->receive_work);
-+ mod_timer(&np->receive_timer, jiffies + 1*HZ);
-+}
-+
-+static void transmit_timeout(unsigned long arg)
-+{
-+ struct net_device* dev = (struct net_device*)arg;
-+ crisv32_eth_do_tx_recovery(dev);
-+}
-+
-+/*
-+ * NAPI poll
-+ *
-+ * We are allowed to pull up to budget number of frames from the rx ring.
-+ * If we are done, remove us from the poll list and re-enable rx interrupts.
-+ * Always return number of pulled frames from the rx ring.
-+ */
-+static int crisv32_eth_poll(struct napi_struct *napi, int budget)
-+{
-+ struct crisv32_ethernet_local *np;
-+ int work_done = 0;
-+ int morework;
-+ int rx_bytes = 0;
-+ reg_dma_rw_ack_intr ack_intr = {0};
-+
-+ np = container_of(napi, struct crisv32_ethernet_local, napi);
-+ crisv32_disable_eth_ints(np);
-+ np->napi_processing = 1;
-+ ack_intr.in_eop = 1;
-+
-+ if (np->new_rx_package == 0) {
-+ /*
-+ * In the previous round we pulled a packet from the ring but
-+ * we didn't advance the ring due to hw DMA bug. Try to do it
-+ * now.
-+ */
-+ np->new_rx_package = 1;
-+ crisv32_eth_rx_ring_advance(np);
-+ }
-+
-+ morework = crisv32_has_rx_work(np, &np->active_rx_desc->descr);
-+
-+ /* See if tx needs attention. */
-+ crisv32_tx_complete(np);
-+
-+ while (morework)
-+ {
-+ rx_bytes += crisv32_eth_receive_packet(np->dev);
-+ work_done++;
-+
-+ /* Ack irq and restart rx dma */
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+ DMA_CONTINUE_DATA(np->dma_in_inst);
-+
-+ if (unlikely(work_done >= budget))
-+ break;
-+
-+ /* See if tx needs attention. */
-+ crisv32_tx_complete(np);
-+
-+ morework = crisv32_has_rx_work(np, &np->active_rx_desc->descr);
-+ }
-+ crisv32_enable_eth_ints(np);
-+
-+ if (!morework) {
-+ np->napi_processing = 0;
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ if (np->pending_overrun) {
-+ crisv32_eth_restart_rx_dma(np->dev, np);
-+ }
-+#endif
-+ if (irqs_disabled())
-+ printk("WARNING: %s irqs disabled!\n", __func__);
-+
-+ if (work_done < budget) {
-+ /* first mark as done, then enable irq's */
-+ napi_complete(napi);
-+ crisv32_enable_rx_ints(np);
-+ crisv32_enable_tx_ints(np);
-+ }
-+ }
-+ np->napi_processing = 0;
-+
-+ np->stats.rx_bytes += rx_bytes;
-+ np->stats.rx_packets += work_done;
-+ update_rx_stats(np);
-+ return work_done;
-+}
-+
-+/*
-+ * This function (i.e. hard_start_xmit) is protected from concurent calls by a
-+ * spinlock (xmit_lock) in the net_device structure.
-+ */
-+static int
-+crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ unsigned char *buf = skb->data;
-+ unsigned long flags;
-+
-+ /*
-+ * Need to disable irq to avoid updating pointer in interrupt while
-+ * sending packets.
-+ */
-+ spin_lock_irqsave(&np->lock, flags);
-+
-+ np->active_tx_desc->skb = skb;
-+ crisv32_eth_hw_send_packet(buf, skb->len, np);
-+
-+ dev->trans_start = jiffies;
-+
-+ /* Stop queue if full. */
-+ if (crisv32_eth_tx_ring_full(np))
-+ netif_stop_queue(dev);
-+
-+ np->txpackets++;
-+ crisv32_eth_roll_tx_timer(np);
-+ spin_unlock_irqrestore(&np->lock, flags);
-+
-+ spin_lock_irqsave(&np->leds->led_lock, flags);
-+ if (!np->leds->led_active && time_after(jiffies,
-+ np->leds->led_next_time)) {
-+ /* light the network leds depending on the current speed. */
-+ crisv32_set_network_leds(CRIS_LED_ACTIVITY, dev);
-+
-+ /* Set the earliest time we may clear the LED */
-+ np->leds->led_next_time = jiffies + NET_FLASH_TIME;
-+ np->leds->led_active = 1;
-+ np->leds->clear_led_timer.data = (unsigned long) dev;
-+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10);
-+ }
-+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+
-+ return 0;
-+}
-+
-+
-+static void
-+crisv32_eth_hw_send_packet(unsigned char *buf, int length, void *priv)
-+{
-+ struct crisv32_ethernet_local *np =
-+ (struct crisv32_ethernet_local *) priv;
-+
-+ /* Configure the tx dma descriptor. */
-+ np->active_tx_desc->descr.buf = (unsigned char *)virt_to_phys(buf);
-+
-+ np->active_tx_desc->descr.after = np->active_tx_desc->descr.buf +
-+ length;
-+ np->active_tx_desc->descr.intr = 1;
-+ np->active_tx_desc->descr.out_eop = 1;
-+
-+ /* Move eol. */
-+ np->active_tx_desc->descr.eol = 1;
-+ flush_dma_descr(&np->active_tx_desc->descr, 1);
-+
-+ if (np->sender_started)
-+ WARN_ON(!np->prev_tx_desc->descr.eol);
-+ np->prev_tx_desc->descr.eol = 0;
-+ flush_dma_descr(&np->prev_tx_desc->descr, 0);
-+
-+ /* Update pointers. */
-+ np->prev_tx_desc = np->active_tx_desc;
-+ np->active_tx_desc = phys_to_virt((int)np->active_tx_desc->descr.next);
-+
-+ /* Start DMA. */
-+ crisv32_start_dma_out(np);
-+}
-+
-+static void crisv32_start_dma_out(struct crisv32_ethernet_local *np)
-+{
-+ if (!np->sender_started) {
-+ /* Start DMA for the first time. */
-+ np->ctxt_out.saved_data =
-+ (void *)virt_to_phys(&np->prev_tx_desc->descr);
-+ np->ctxt_out.saved_data_buf = np->prev_tx_desc->descr.buf;
-+ WARN_ON(!np->ctxt_out.saved_data_buf);
-+
-+ cris_flush_cache_range(&np->ctxt_out, sizeof np->ctxt_out);
-+ REG_WR(dma, np->dma_out_inst, rw_group_down,
-+ (int) virt_to_phys(&np->ctxt_out));
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst);
-+ np->sender_started = 1;
-+ } else {
-+ DMA_CONTINUE_DATA(np->dma_out_inst);
-+ }
-+}
-+
-+/*
-+ * Bring the transmitter back to life.
-+ */
-+static void
-+crisv32_eth_do_tx_recovery(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ reg_eth_rw_clr_err clr_err;
-+ reg_dma_rw_stat stat = {0};
-+ unsigned long flags;
-+ /* ACK urun and exc_col. */
-+ int ack_intr = 0x1800;
-+ int do_full;
-+
-+ /* Give the tx recovery some time without link state polling. */
-+ if (!np->fixed_phy)
-+ mod_timer(&np->speed_timer, jiffies + 4 * HZ);
-+
-+ np->tx_dma_restarts++;
-+
-+ spin_lock_irqsave(&np->lock, flags);
-+
-+ do_full = 1;
-+ update_tx_stats(np);
-+
-+ /* Cancel ongoing frame. */
-+ crisv32_eth_tx_cancel_frame(np);
-+
-+ /* In case TR 125 just hit us. */
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_ack_pkt);
-+ dma_wait_busy(np->dma_out_inst, 100);
-+
-+ /* At this point, the transmit block should be idle or waiting for us
-+ to clear the excessive collision error. Let's reset the DMA. */
-+ DMA_STOP(np->dma_out_inst);
-+
-+ crisv32_disconnect_eth_tx_dma(np);
-+
-+ /* Eat from the tx ring. */
-+ _crisv32_tx_ring_advance(np, 1);
-+ np->do_tx_recovery++;
-+
-+ DMA_RESET(np->dma_out_inst);
-+ do {
-+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+ } while (stat.mode != regk_dma_rst);
-+
-+ /* Next packet will restart output DMA. */
-+ np->sender_started = 0;
-+
-+ crisv32_enable_tx_ints(np);
-+
-+ DMA_ENABLE(np->dma_out_inst);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4);
-+#endif
-+ DMA_CONTINUE(np->dma_out_inst);
-+
-+ /* Clear pending errors. */
-+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr);
-+ clr_err.clr = 1;
-+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
-+
-+ /* Do a full reset of the MAC block. */
-+ if (do_full) {
-+ np->tx_mac_resets++;
-+ crisv32_eth_reset(np);
-+ }
-+
-+ crisv32_connect_eth_tx_dma(np);
-+
-+ if (np->txpackets) {
-+ WARN_ON(!np->catch_tx_desc->skb);
-+ np->catch_tx_desc->descr.intr = 1;
-+ np->catch_tx_desc->descr.out_eop = 1;
-+
-+ /* Start DMA for the first time. */
-+ np->ctxt_out.saved_data =
-+ (void *)virt_to_phys(&np->catch_tx_desc->descr);
-+ np->ctxt_out.saved_data_buf = np->catch_tx_desc->descr.buf;
-+ WARN_ON(!np->ctxt_out.saved_data_buf);
-+ flush_dma_descr(&np->catch_tx_desc->descr, 0);
-+ cris_flush_cache_range(&np->ctxt_out, sizeof np->ctxt_out);
-+
-+ REG_WR(dma, np->dma_out_inst, rw_group_down,
-+ (int) virt_to_phys(&np->ctxt_out));
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst);
-+ crisv32_eth_roll_tx_timer(np);
-+ np->sender_started = 1;
-+ }
-+
-+ if (np->txpackets && crisv32_eth_tx_ring_full(np))
-+ netif_stop_queue(dev);
-+ else
-+ netif_wake_queue(dev);
-+
-+ spin_unlock_irqrestore(&np->lock, flags);
-+}
-+
-+/*
-+ * Set or clear the multicast filter for this adaptor.
-+ * num_addrs == -1 Promiscuous mode, receive all packets
-+ * num_addrs == 0 Normal mode, clear multicast list
-+ * num_addrs > 0 Multicast mode, receive normal and MC packets,
-+ * and do best-effort filtering.
-+ */
-+static void crisv32_eth_set_rx_mode(struct net_device *dev)
-+{
-+ int num_addr = netdev_mc_count(dev);
-+ unsigned long int lo_bits;
-+ unsigned long int hi_bits;
-+ reg_eth_rw_rec_ctrl rec_ctrl = {0};
-+ reg_eth_rw_ga_lo ga_lo = {0};
-+ reg_eth_rw_ga_hi ga_hi = {0};
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ if (dev->flags & IFF_PROMISC) {
-+ /* Promiscuous mode. */
-+ lo_bits = 0xfffffffful;
-+ hi_bits = 0xfffffffful;
-+
-+ /* Enable individual receive. */
-+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst,
-+ rw_rec_ctrl);
-+ rec_ctrl.individual = regk_eth_yes;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ } else if (dev->flags & IFF_ALLMULTI) {
-+ /* Enable all multicasts. */
-+ lo_bits = 0xfffffffful;
-+ hi_bits = 0xfffffffful;
-+
-+ /* Disable individual receive */
-+ rec_ctrl =
-+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.individual = regk_eth_no;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ } else if (num_addr == 0) {
-+ /* Normal, clear the mc list. */
-+ lo_bits = 0x00000000ul;
-+ hi_bits = 0x00000000ul;
-+
-+ /* Disable individual receive */
-+ rec_ctrl =
-+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.individual = regk_eth_no;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ } else {
-+ /* MC mode, receive normal and MC packets. */
-+ char hash_ix;
-+ struct netdev_hw_addr *ha;
-+ char *baddr;
-+ lo_bits = 0x00000000ul;
-+ hi_bits = 0x00000000ul;
-+
-+ netdev_for_each_mc_addr(ha, dev) {
-+ /* Calculate the hash index for the GA registers. */
-+ hash_ix = 0;
-+ baddr = ha->addr;
-+ hash_ix ^= (*baddr) & 0x3f;
-+ hash_ix ^= ((*baddr) >> 6) & 0x03;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 2) & 0x03c;
-+ hash_ix ^= ((*baddr) >> 4) & 0xf;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 4) & 0x30;
-+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+ ++baddr;
-+ hash_ix ^= (*baddr) & 0x3f;
-+ hash_ix ^= ((*baddr) >> 6) & 0x03;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 2) & 0x03c;
-+ hash_ix ^= ((*baddr) >> 4) & 0xf;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 4) & 0x30;
-+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+
-+ hash_ix &= 0x3f;
-+
-+ if (hash_ix > 32)
-+ hi_bits |= (1 << (hash_ix - 32));
-+ else
-+ lo_bits |= (1 << hash_ix);
-+ }
-+
-+ /* Disable individual receive. */
-+ rec_ctrl =
-+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.individual = regk_eth_no;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ }
-+
-+ ga_lo.table = (unsigned int) lo_bits;
-+ ga_hi.table = (unsigned int) hi_bits;
-+
-+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo);
-+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi);
-+}
-+
-+static int
-+crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = if_mii(ifr);
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int old_autoneg;
-+ int rc = 0;
-+
-+ spin_lock(&np->lock); /* Preempt protection */
-+ switch (cmd) {
-+ case SET_ETH_ENABLE_LEDS:
-+ np->use_leds = 1;
-+ break;
-+ case SET_ETH_DISABLE_LEDS:
-+ np->use_leds = 0;
-+ break;
-+ case SET_ETH_AUTONEG:
-+ old_autoneg = np->autoneg_normal;
-+ np->autoneg_normal = *(int*)data;
-+ if (np->autoneg_normal != old_autoneg)
-+ crisv32_eth_negotiate(dev);
-+ break;
-+ default:
-+ rc = generic_mii_ioctl(&np->mii_if,
-+ if_mii(ifr), cmd, NULL);
-+ break;
-+ }
-+ spin_unlock(&np->lock);
-+ return rc;
-+}
-+
-+static int crisv32_eth_get_settings(struct net_device *dev,
-+ struct ethtool_cmd *cmd)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int err;
-+
-+ spin_lock_irq(&np->lock);
-+ err = mii_ethtool_gset(&np->mii_if, cmd);
-+ spin_unlock_irq(&np->lock);
-+
-+ /* The PHY may support 1000baseT, but the EtraxFS does not. */
-+ cmd->supported &= ~(SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full);
-+ return err;
-+}
-+
-+static int crisv32_eth_set_settings(struct net_device *dev,
-+ struct ethtool_cmd *ecmd)
-+{
-+ if (ecmd->autoneg == AUTONEG_ENABLE) {
-+ crisv32_eth_set_duplex(dev, autoneg);
-+ crisv32_eth_set_speed(dev, 0);
-+ } else {
-+ crisv32_eth_set_duplex(dev, ecmd->duplex);
-+ crisv32_eth_set_speed(dev, ecmd->speed);
-+ }
-+
-+ return 0;
-+}
-+
-+static void crisv32_eth_get_drvinfo(struct net_device *dev,
-+ struct ethtool_drvinfo *info)
-+{
-+#ifdef CONFIG_ETRAXFS
-+ strncpy(info->driver, "ETRAX FS", sizeof(info->driver) - 1);
-+#else
-+ strncpy(info->driver, "ARTPEC-3", sizeof(info->driver) - 1);
-+#endif
-+ strncpy(info->version, "$Revision: 1.197 $", sizeof(info->version) - 1);
-+ strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1);
-+ strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1);
-+}
-+
-+static int crisv32_eth_get_ethtool_sset_count(struct net_device *dev,
-+ int stringset)
-+{
-+ if (stringset != ETH_SS_STATS)
-+ return -EINVAL;
-+
-+ return ARRAY_SIZE(ethtool_stats_keys);
-+}
-+
-+static void crisv32_eth_get_ethtool_stats(struct net_device *dev,
-+ struct ethtool_stats *stats,
-+ u64 *data)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data[0] = np->tx_dma_restarts;
-+ data[1] = np->tx_mac_resets;
-+ data[2] = np->rx_dma_restarts;
-+ data[3] = np->rx_dma_timeouts;
-+ data[4] = np->rx_restarts_dropped;
-+}
-+
-+static void crisv32_eth_get_strings(struct net_device *dev,
-+ u32 stringset, u8 *data)
-+{
-+ switch (stringset) {
-+ case ETH_SS_STATS:
-+ memcpy(data, &ethtool_stats_keys,
-+ sizeof(ethtool_stats_keys));
-+ break;
-+ default:
-+ WARN_ON(1);
-+ break;
-+ }
-+}
-+
-+static int crisv32_eth_nway_reset(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ if (np->current_duplex == autoneg && np->current_speed_selection == 0)
-+ crisv32_eth_negotiate(dev);
-+ return 0;
-+}
-+/* The FS/A3 ethernet block has 23 32-bit config registers. */
-+/* plus 2 dma_descr_context */
-+/* plus 2 sets of ring pointers (active, prev, last) */
-+/* plus 2 sets of DMA registers 40*4 bytes = 0xA0 */
-+#define ETRAX_ETH_REGDUMP_LEN (23 * 4 + 2 * sizeof (dma_descr_context) + 2*3*4 + 2*0xA0)
-+static int crisv32_eth_get_regs_len(struct net_device *dev)
-+{
-+ return ETRAX_ETH_REGDUMP_LEN;
-+}
-+
-+static void crisv32_eth_get_regs(struct net_device *dev,
-+ struct ethtool_regs *regs, void *_p)
-+{
-+ u32 *p = _p;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int i;
-+
-+ /* Let's call this major version 0, minor version 1 with some
-+ * undecided field separation in the version data. Previously
-+ * only the eth regs were dumped (version=0: maj 0, min 0).*/
-+ regs->version = 1;
-+ memset(p, 0, ETRAX_ETH_REGDUMP_LEN);
-+
-+#define GET_REG32_LOOP(base, len) \
-+ do { \
-+ for (i = 0; i < len; i += 4) \
-+ *(p)++ = REG_READ(u32, (base) + i); \
-+ } while (0)
-+
-+ GET_REG32_LOOP(np->eth_inst, 0x30);
-+ /* Do not dump registers with read side effects. */
-+ GET_REG32_LOOP(np->eth_inst + 0x34, 1);
-+ GET_REG32_LOOP(np->eth_inst + 0x3c, 1);
-+ GET_REG32_LOOP(np->eth_inst + 0x44, 0x5c - 0x44);
-+
-+
-+ memcpy(p, &np->ctxt_out, sizeof (dma_descr_context));
-+ p += sizeof (dma_descr_context)/4;
-+ *(p++) = (u32) np->active_tx_desc;
-+ *(p++) = (u32) np->prev_tx_desc;
-+ *(p++) = (u32) np->catch_tx_desc;
-+
-+ GET_REG32_LOOP(np->dma_out_inst, 0xa0);
-+
-+ memcpy(p, &np->ctxt_in, sizeof (dma_descr_context));
-+ p += sizeof (dma_descr_context)/4;
-+ *(p++) = (u32)np->active_rx_desc;
-+ *(p++) = (u32)np->prev_rx_desc;
-+ *(p++) = (u32)np->last_rx_desc;
-+
-+ GET_REG32_LOOP(np->dma_in_inst, 0xa0);
-+#undef GET_REG32_LOOP
-+}
-+
-+static struct ethtool_ops crisv32_ethtool_ops = {
-+ .get_settings = crisv32_eth_get_settings,
-+ .set_settings = crisv32_eth_set_settings,
-+ .get_drvinfo = crisv32_eth_get_drvinfo,
-+ .get_regs_len = crisv32_eth_get_regs_len,
-+ .get_regs = crisv32_eth_get_regs,
-+ .nway_reset = crisv32_eth_nway_reset,
-+ .get_link = ethtool_op_get_link,
-+ .get_strings = crisv32_eth_get_strings,
-+ .get_ethtool_stats = crisv32_eth_get_ethtool_stats,
-+ .get_sset_count = crisv32_eth_get_ethtool_sset_count
-+};
-+
-+/* Is this function really needed? Use ethtool instead? */
-+static int crisv32_eth_set_config(struct net_device *dev, struct ifmap *map)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->lock); /* Preempt protection */
-+
-+ switch (map->port) {
-+ case IF_PORT_UNKNOWN:
-+ /* Use autoneg */
-+ crisv32_eth_set_speed(dev, 0);
-+ crisv32_eth_set_duplex(dev, autoneg);
-+ break;
-+ case IF_PORT_10BASET:
-+ crisv32_eth_set_speed(dev, 10);
-+ crisv32_eth_set_duplex(dev, autoneg);
-+ break;
-+ case IF_PORT_100BASET:
-+ case IF_PORT_100BASETX:
-+ crisv32_eth_set_speed(dev, 100);
-+ crisv32_eth_set_duplex(dev, autoneg);
-+ break;
-+ case IF_PORT_100BASEFX:
-+ case IF_PORT_10BASE2:
-+ case IF_PORT_AUI:
-+ spin_unlock(&np->lock);
-+ return -EOPNOTSUPP;
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: Invalid media selected",
-+ dev->name);
-+ spin_unlock(&np->lock);
-+ return -EINVAL;
-+ }
-+ spin_unlock(&np->lock);
-+ return 0;
-+}
-+
-+static void crisv32_eth_negotiate(struct net_device *dev)
-+{
-+ unsigned short data;
-+ unsigned short ctrl1000;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+ ctrl1000 = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MII_CTRL1000);
-+
-+ /* Make all capabilities available */
-+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
-+ ADVERTISE_100HALF | ADVERTISE_100FULL;
-+ ctrl1000 |= ADVERTISE_1000HALF | ADVERTISE_1000FULL;
-+
-+ /* Remove the speed capabilities that we that do not want */
-+ switch (np->current_speed_selection) {
-+ case 10 :
-+ data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ break;
-+ case 100 :
-+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
-+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ break;
-+ case 1000 :
-+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
-+ ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ break;
-+ }
-+
-+ /* Remove the duplex capabilites that we do not want */
-+ if (np->current_duplex == full) {
-+ data &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF);
-+ ctrl1000 &= ~(ADVERTISE_1000HALF);
-+ }
-+ else if (np->current_duplex == half) {
-+ data &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL);
-+ ctrl1000 &= ~(ADVERTISE_1000FULL);
-+ }
-+
-+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id,
-+ MII_CTRL1000, ctrl1000);
-+#endif
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+ if (np->autoneg_normal) {
-+ /* Renegotiate with link partner */
-+ data |= BMCR_ANENABLE | BMCR_ANRESTART;
-+ } else {
-+ /* Don't negitiate speed or duplex */
-+ data &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
-+
-+ /* Set speed and duplex static */
-+ if (np->current_speed_selection == 10) {
-+ data &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
-+ }
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ else if (np->current_speed_selection == 1000) {
-+ data &= ~BMCR_SPEED100;
-+ data |= BMCR_SPEED1000;
-+ }
-+#endif
-+ else {
-+ data |= BMCR_SPEED100;
-+ data &= ~BMCR_SPEED1000;
-+ }
-+
-+ if (np->current_duplex != full) {
-+ data &= ~BMCR_FULLDPLX;
-+ } else {
-+ data |= BMCR_FULLDPLX;
-+ }
-+ }
-+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
-+}
-+
-+static void crisv32_eth_check_speed(unsigned long idev)
-+{
-+#ifndef CONFIG_ETRAX_NO_PHY
-+ static int led_initiated = 0;
-+ struct net_device *dev = (struct net_device *) idev;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ unsigned long data;
-+ int old_speed;
-+ unsigned long flags;
-+
-+ BUG_ON(!np);
-+ BUG_ON(!np->transceiver);
-+
-+ spin_lock(&np->transceiver_lock);
-+
-+ old_speed = np->current_speed;
-+
-+ /* Do a fake read. This is needed for DM9161, otherwise the link will
-+ * go up and down all the time.
-+ */
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR);
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR);
-+
-+ if (!(data & BMSR_LSTATUS))
-+ np->current_speed = 0;
-+ else
-+ np->transceiver->check_speed(dev);
-+
-+ spin_lock_irqsave(&np->leds->led_lock, flags);
-+ if ((old_speed != np->current_speed) || !led_initiated) {
-+ led_initiated = 1;
-+ np->leds->clear_led_timer.data = (unsigned long) dev;
-+ if (np->current_speed) {
-+ if (!np->link)
-+ netif_carrier_on(dev);
-+ crisv32_set_network_leds(CRIS_LED_LINK, dev);
-+ np->link = 1;
-+ } else {
-+ if (np->link)
-+ netif_carrier_off(dev);
-+ crisv32_set_network_leds(CRIS_LED_NOLINK, dev);
-+ np->link = 0;
-+ }
-+ }
-+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+
-+ /* Reinitialize the timer. */
-+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+ add_timer(&np->speed_timer);
-+
-+ spin_unlock(&np->transceiver_lock);
-+#endif
-+}
-+
-+static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->transceiver_lock);
-+ if (np->current_speed_selection != speed) {
-+ np->current_speed_selection = speed;
-+ crisv32_eth_negotiate(dev);
-+ }
-+ spin_unlock(&np->transceiver_lock);
-+}
-+
-+static void crisv32_eth_check_duplex(unsigned long idev)
-+{
-+#ifndef CONFIG_ETRAX_NO_PHY
-+ struct net_device *dev = (struct net_device *) idev;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ reg_eth_rw_rec_ctrl rec_ctrl;
-+ int old_duplex = np->full_duplex;
-+
-+ np->transceiver->check_duplex(dev);
-+
-+ if (old_duplex != np->full_duplex) {
-+ /* Duplex changed. */
-+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst,
-+ rw_rec_ctrl);
-+ rec_ctrl.duplex = np->full_duplex;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ }
-+
-+ /* Reinitialize the timer. */
-+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+ add_timer(&np->duplex_timer);
-+#endif
-+}
-+
-+static void
-+crisv32_eth_set_duplex(struct net_device *dev, enum duplex new_duplex)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ spin_lock(&np->transceiver_lock);
-+ if (np->current_duplex != new_duplex) {
-+ np->current_duplex = new_duplex;
-+ crisv32_eth_negotiate(dev);
-+ }
-+ spin_unlock(&np->transceiver_lock);
-+}
-+
-+static int crisv32_eth_probe_transceiver(struct net_device *dev)
-+{
-+#ifndef CONFIG_ETRAX_NO_PHY
-+ unsigned int phyid_high;
-+ unsigned int phyid_low;
-+ unsigned int oui;
-+ struct transceiver_ops *ops = NULL;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Probe MDIO physical address. */
-+ for (np->mii_if.phy_id = 0;
-+ np->mii_if.phy_id <= 31; np->mii_if.phy_id++) {
-+ if (crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR)
-+ != 0xffff)
-+ break;
-+ }
-+
-+ if (np->mii_if.phy_id == 32)
-+ return -ENODEV;
-+
-+ /* Get manufacturer. */
-+ phyid_high = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MII_PHYSID1);
-+ phyid_low = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MII_PHYSID2);
-+
-+ oui = (phyid_high << 6) | (phyid_low >> 10);
-+
-+ for (ops = &transceivers[0]; ops->oui; ops++) {
-+ if (ops->oui == oui)
-+ break;
-+ }
-+
-+ np->transceiver = ops;
-+
-+ if (oui == DM9161_OUI) {
-+ /* Do not bypass the scrambler/descrambler, this is needed
-+ * to make 10Mbit work.
-+ */
-+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id,
-+ MII_DM9161_SCR,MII_DM9161_SCR_INIT);
-+ /* Clear 10BTCSR to default */
-+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id,
-+ MII_DM9161_10BTCSR,
-+ MII_DM9161_10BTCSR_INIT);
-+ }
-+ return 0;
-+#else
-+ return -ENODEV;
-+#endif
-+}
-+
-+#ifndef CONFIG_ETRAX_NO_PHY
-+static void generic_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+ if ((data & ADVERTISE_100FULL) ||
-+ (data & ADVERTISE_100HALF))
-+ np->current_speed = 100;
-+ else
-+ np->current_speed = 10;
-+}
-+
-+static void generic_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
-+ if ((data & ADVERTISE_10FULL) ||
-+ (data & ADVERTISE_100FULL))
-+ np->full_duplex = 1;
-+ else
-+ np->full_duplex = 0;
-+}
-+
-+static void broadcom_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_AUX_CTRL_STATUS_REG);
-+ np->current_speed = (data & MDIO_BC_SPEED ? 100 : 10);
-+}
-+
-+static void broadcom_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_AUX_CTRL_STATUS_REG);
-+ np->full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+
-+static void tdk_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_TDK_DIAGNOSTIC_REG);
-+ np->current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10);
-+}
-+
-+static void tdk_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_TDK_DIAGNOSTIC_REG);
-+ np->full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
-+
-+}
-+
-+static void intel_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_INT_STATUS_REG_2);
-+ np->current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
-+}
-+
-+static void intel_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_INT_STATUS_REG_2);
-+ np->full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+
-+static void national_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_NAT_LINK_AN_REG);
-+ if (data & MDIO_NAT_1000)
-+ np->current_speed = 1000;
-+ else if (data & MDIO_NAT_100)
-+ np->current_speed = 100;
-+ else
-+ np->current_speed = 10;
-+}
-+
-+static void national_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_NAT_LINK_AN_REG);
-+ if (data & MDIO_NAT_FULL_DUPLEX_IND)
-+ np->full_duplex = 1;
-+ else
-+ np->full_duplex = 0;
-+}
-+
-+static void vitesse_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_VIT_AUX_STAT);
-+ if ((data & 0x18) == MDIO_VIT_1000)
-+ np->current_speed = 1000;
-+ else if ((data & 0x18) == MDIO_VIT_100)
-+ np->current_speed = 100;
-+ else
-+ np->current_speed = 10;
-+}
-+
-+static void vitesse_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MDIO_VIT_AUX_STAT);
-+ if (data & 0x20)
-+ np->full_duplex = 1;
-+ else
-+ np->full_duplex = 0;
-+}
-+
-+static void davicom_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+ np->current_speed = (data & BMCR_SPEED100) ? 100 : 10;
-+}
-+
-+static void davicom_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+ np->full_duplex = (data & BMCR_FULLDPLX) ? 1 : 0;
-+}
-+#endif
-+
-+#if 0
-+static void crisv32_eth_reset_tranceiver(struct net_device *dev)
-+{
-+ int i;
-+ unsigned short cmd;
-+ unsigned short data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-+
-+ cmd = (MDIO_START << 14)
-+ | (MDIO_WRITE << 12)
-+ | (np->mii_if.phy_id << 7)
-+ | (MII_BMCR << 2);
-+
-+ crisv32_eth_send_mdio_cmd(dev, cmd, 1);
-+
-+ data |= 0x8000;
-+
-+ /* Magic value is number of bits. */
-+ for (i = 15; i >= 0; i--)
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data));
-+}
-+#endif
-+
-+static int
-+crisv32_eth_get_mdio_reg(struct net_device *dev, int phyid, int reg_num)
-+{
-+ int i;
-+ unsigned short cmd; /* Data to be sent on MDIO port. */
-+ unsigned short data; /* Data read from MDIO. */
-+
-+#ifdef CONFIG_ETRAX_NO_PHY
-+ return 0;
-+#endif
-+
-+ /* Start of frame, OP Code, Physical Address, Register Address. */
-+ cmd = (MDIO_START << 14)
-+ | (MDIO_READ << 12)
-+ | (phyid << 7)
-+ | (reg_num << 2);
-+
-+ crisv32_eth_send_mdio_cmd(dev, cmd, 0);
-+
-+ data = 0;
-+
-+ /* Receive data. Magic value is number of bits. */
-+ for (i = 15; i >= 0; i--)
-+ data |= (crisv32_eth_receive_mdio_bit(dev) << i);
-+
-+ return data;
-+}
-+
-+static void
-+crisv32_eth_set_mdio_reg(struct net_device *dev, int phyid, int reg, int value)
-+{
-+ int bitCounter;
-+ unsigned short cmd;
-+
-+#ifdef CONFIG_ETRAX_NO_PHY
-+ return;
-+#endif
-+ cmd = (MDIO_START << 14)
-+ | (MDIO_WRITE << 12)
-+ | (phyid << 7)
-+ | (reg << 2);
-+
-+ crisv32_eth_send_mdio_cmd(dev, cmd, 1);
-+
-+ /* Data... */
-+ for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(bitCounter, value));
-+ }
-+}
-+
-+static void
-+crisv32_eth_send_mdio_cmd(struct net_device *dev, unsigned short cmd,
-+ int write_cmd)
-+{
-+ int i;
-+ unsigned char data = 0x2;
-+
-+ /* Preamble. Magic value is number of bits. */
-+ for (i = 31; i >= 0; i--)
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, MDIO_PREAMBLE));
-+
-+ for (i = 15; i >= 2; i--)
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, cmd));
-+
-+ /* Turnaround. */
-+ for (i = 1; i >= 0; i--)
-+ if (write_cmd)
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data));
-+ else
-+ crisv32_eth_receive_mdio_bit(dev);
-+}
-+
-+static void crisv32_eth_send_mdio_bit(struct net_device *dev, unsigned char bit)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ reg_eth_rw_mgm_ctrl mgm_ctrl = {
-+ .mdoe = regk_eth_yes,
-+ .mdio = bit & 1
-+ };
-+
-+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+
-+ udelay(1);
-+
-+ mgm_ctrl.mdc = 1;
-+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+
-+ udelay(1);
-+}
-+
-+static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev)
-+{
-+ reg_eth_r_stat stat;
-+ reg_eth_rw_mgm_ctrl mgm_ctrl = {0};
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+ stat = REG_RD(eth, np->eth_inst, r_stat);
-+
-+ udelay(1);
-+
-+ mgm_ctrl.mdc = 1;
-+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+
-+ udelay(1);
-+ return stat.mdio;
-+}
-+
-+static void crisv32_clear_network_leds(unsigned long priv)
-+{
-+ struct net_device *dev = (struct net_device *)priv;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&np->leds->led_lock, flags);
-+ if (np->leds->led_active && time_after(jiffies,
-+ np->leds->led_next_time)) {
-+ crisv32_set_network_leds(CRIS_LED_NOACTIVITY, dev);
-+
-+ /* Set the earliest time we may set the LED */
-+ np->leds->led_next_time = jiffies + NET_FLASH_PAUSE;
-+ np->leds->led_active = 0;
-+ }
-+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+}
-+
-+static void crisv32_set_network_leds(int active, struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int light_leds = 0;
-+
-+ if (np->leds->ledgrp == CRIS_LED_GRP_NONE)
-+ return;
-+
-+ if (!np->use_leds)
-+ return;
-+
-+ if (active == CRIS_LED_NOLINK) {
-+ if (dev == crisv32_dev[0])
-+ np->leds->ifisup[0] = 0;
-+ else
-+ np->leds->ifisup[1] = 0;
-+ }
-+ else if (active == CRIS_LED_LINK) {
-+ if (dev == crisv32_dev[0])
-+ np->leds->ifisup[0] = 1;
-+ else
-+ np->leds->ifisup[1] = 1;
-+#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK)
-+ light_leds = 1;
-+ } else {
-+ light_leds = (active == CRIS_LED_NOACTIVITY);
-+#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY)
-+ light_leds = 0;
-+ } else {
-+ light_leds = (active == CRIS_LED_ACTIVITY);
-+#else
-+#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY"
-+#endif
-+ }
-+
-+ if (!np->current_speed) {
-+ /* Set link down if none of the interfaces that use this led
-+ group is up */
-+ if ((np->leds->ifisup[0] + np->leds->ifisup[1]) == 0) {
-+#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION)
-+ /* Make LED red, link is down */
-+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_RED);
-+#else
-+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_OFF);
-+#endif
-+ }
-+ } else if (light_leds) {
-+ if (np->current_speed == 10)
-+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_ORANGE);
-+ else
-+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_GREEN);
-+ } else
-+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_OFF);
-+}
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void crisv32_netpoll(struct net_device *netdev)
-+{
-+ crisv32rx_eth_interrupt(DMA0_INTR_VECT, netdev);
-+}
-+#endif
-+
-+#ifdef CONFIG_CPU_FREQ
-+static int crisv32_ethernet_freq_notifier(struct notifier_block *nb,
-+ unsigned long val, void *data)
-+{
-+ struct cpufreq_freqs *freqs = data;
-+ int i;
-+ if (val != CPUFREQ_POSTCHANGE)
-+ return 0;
-+
-+ for (i = 0; i < 2; i++) {
-+ struct net_device *dev = crisv32_dev[i];
-+ unsigned short data;
-+ if (dev == NULL)
-+ continue;
-+
-+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id,
-+ MII_BMCR);
-+ if (freqs->new == 200000)
-+ data &= ~BMCR_PDOWN;
-+ else
-+ data |= BMCR_PDOWN;
-+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id,
-+ MII_BMCR, data);
-+ }
-+ return 0;
-+}
-+#endif
-+
-+#if 0
-+/*
-+ * Must be called with the np->lock held.
-+ */
-+static void crisv32_ethernet_bug(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ dma_descr_data *dma_pos;
-+ dma_descr_data *in_dma_pos;
-+ reg_dma_rw_stat stat = {0};
-+ reg_dma_rw_stat in_stat = {0};
-+ int i;
-+
-+ /* Get the current output dma position. */
-+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+
-+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data));
-+ in_dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data));
-+ in_stat = REG_RD(dma, np->dma_in_inst, rw_stat);
-+
-+ printk("%s:\n"
-+ "stat.list_state=%x\n"
-+ "stat.mode=%x\n"
-+ "stat.stream_cmd_src=%x\n"
-+ "dma_pos=%x\n"
-+ "tx catch=%x active=%x\n"
-+ "packets=%d queue=%d sender_started=%d\n"
-+ "intr_vect.r_vect=%x\n"
-+ "dma.r_masked_intr=%x dma.rw_ack_intr=%x "
-+ "dma.r_intr=%x dma.rw_intr_masked=%x\n"
-+ "eth.r_stat=%x\n",
-+ __func__,
-+ stat.list_state, stat.mode, stat.stream_cmd_src,
-+ (unsigned int)dma_pos,
-+ (unsigned int)&np->catch_tx_desc->descr,
-+ (unsigned int)&np->active_tx_desc->descr,
-+ np->txpackets,
-+ netif_queue_stopped(dev), np->sender_started,
-+ REG_RD_INT(intr_vect, regi_irq, r_vect),
-+ REG_RD_INT(dma, np->dma_out_inst, r_masked_intr),
-+ REG_RD_INT(dma, np->dma_out_inst, rw_ack_intr),
-+ REG_RD_INT(dma, np->dma_out_inst, r_intr),
-+ REG_RD_INT(dma, np->dma_out_inst, rw_intr_mask),
-+ REG_RD_INT(eth, np->eth_inst, r_stat));
-+
-+ printk("in_stat.list_state=%x\n"
-+ "in_stat.mode=%x\n"
-+ "in_stat.stream_cmd_src=%x\n"
-+ "in_dma_pos=%x\n"
-+ "rx last=%x prev=%x active=%x\n",
-+ in_stat.list_state, in_stat.mode, in_stat.stream_cmd_src,
-+ (unsigned int)in_dma_pos,
-+ (unsigned int)&np->last_rx_desc->descr,
-+ (unsigned int)&np->prev_rx_desc->descr,
-+ (unsigned int)&np->active_rx_desc->descr);
-+
-+#if 0
-+ printk("rx-descriptors:\n");
-+ for (i = 0; i < NBR_RX_DESC; i++) {
-+ printk("rxdesc[%d]=0x%x\n", i, (unsigned int)
-+ virt_to_phys(&np->dma_rx_descr_list[i].descr));
-+ printk("rxdesc[%d].skb=0x%x\n", i,
-+ (unsigned int)np->dma_rx_descr_list[i].skb);
-+ printk("rxdesc[%d].buf=0x%x\n", i,
-+ (unsigned int)np->dma_rx_descr_list[i].descr.buf);
-+ printk("rxdesc[%d].after=0x%x\n", i,
-+ (unsigned int)np->dma_rx_descr_list[i].descr.after);
-+ printk("rxdesc[%d].intr=%x\n", i,
-+ np->dma_rx_descr_list[i].descr.intr);
-+ printk("rxdesc[%d].eol=%x\n", i,
-+ np->dma_rx_descr_list[i].descr.eol);
-+ printk("rxdesc[%d].out_eop=%x\n", i,
-+ np->dma_rx_descr_list[i].descr.out_eop);
-+ printk("rxdesc[%d].in_eop=%x\n", i,
-+ np->dma_rx_descr_list[i].descr.in_eop);
-+ printk("rxdesc[%d].wait=%x\n", i,
-+ np->dma_rx_descr_list[i].descr.wait);
-+ }
-+#endif
-+
-+#if 1
-+ printk("tx-descriptors:\n");
-+ for (i = 0; i < NBR_TX_DESC; i++) {
-+ printk("txdesc[%d]=0x%x\n", i, (unsigned int)
-+ virt_to_phys(&np->dma_tx_descr_list[i].descr));
-+ printk("txdesc[%d].skb=0x%x\n", i,
-+ (unsigned int)np->dma_tx_descr_list[i].skb);
-+ printk("txdesc[%d].buf=0x%x\n", i,
-+ (unsigned int)np->dma_tx_descr_list[i].descr.buf);
-+ printk("txdesc[%d].after=0x%x\n", i,
-+ (unsigned int)np->dma_tx_descr_list[i].descr.after);
-+ printk("txdesc[%d].intr=%x\n", i,
-+ np->dma_tx_descr_list[i].descr.intr);
-+ printk("txdesc[%d].eol=%x\n", i,
-+ np->dma_tx_descr_list[i].descr.eol);
-+ printk("txdesc[%d].out_eop=%x\n", i,
-+ np->dma_tx_descr_list[i].descr.out_eop);
-+ printk("txdesc[%d].in_eop=%x\n", i,
-+ np->dma_tx_descr_list[i].descr.in_eop);
-+ printk("txdesc[%d].wait=%x\n", i,
-+ np->dma_tx_descr_list[i].descr.wait);
-+ }
-+#endif
-+}
-+#endif
-+
-+static int __init crisv32_boot_setup(char *str)
-+{
-+ struct sockaddr sa = {0};
-+ int i;
-+
-+ /* Parse the colon separated Ethernet station address */
-+ for (i = 0; i < ETH_ALEN; i++) {
-+ unsigned int tmp;
-+ if (sscanf(str + 3*i, "%2x", &tmp) != 1) {
-+ printk(KERN_WARNING "Malformed station address");
-+ return 0;
-+ }
-+ sa.sa_data[i] = (char)tmp;
-+ }
-+
-+ default_mac_iface0 = sa;
-+ return 1;
-+}
-+
-+__setup("crisv32_eth=", crisv32_boot_setup);
-+
-+module_init(crisv32_ethernet_init);
-diff --git a/drivers/net/cris/eth_v32.h b/drivers/net/cris/eth_v32.h
-new file mode 100644
-index 0000000..b6b0c7c
---- /dev/null
-+++ b/drivers/net/cris/eth_v32.h
-@@ -0,0 +1,297 @@
-+/*
-+ * Definitions for ETRAX FS ethernet driver.
-+ *
-+ * Copyright (C) 2003, 2004, 2005 Axis Communications.
-+ */
-+
-+#ifndef _ETRAX_ETHERNET_H_
-+#define _ETRAX_ETHERNET_H_
-+
-+#include <hwregs/dma.h>
-+
-+#define MAX_MEDIA_DATA_SIZE 1522 /* Max packet size. */
-+
-+#define NBR_RX_DESC 128 /* Number of RX descriptors. */
-+#define NBR_TX_DESC 16 /* Number of TX descriptors. */
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+#define NBR_INTMEM_RX_DESC 16 /* Number of RX descriptors in int. mem.
-+ * when running in gigabit mode.
-+ * Should be less then NBR_RX_DESC
-+ */
-+#define NBR_INTMEM_TX_BUF 4 /* Number of TX buffers in int. mem
-+ * when running in gigabit mode.
-+ * Should be less than NBR_TX_DESC
-+ */
-+#endif
-+
-+/* Large packets are sent directly to upper layers while small packets
-+ * are copied (to reduce memory waste). The following constant
-+ * decides the breakpoint.
-+ */
-+#define RX_COPYBREAK (256)
-+
-+#define ETHER_HEAD_LEN (14)
-+
-+/*
-+ * MDIO constants.
-+ */
-+#define MDIO_START 0x1
-+#define MDIO_READ 0x2
-+#define MDIO_WRITE 0x1
-+#define MDIO_PREAMBLE 0xfffffffful
-+
-+/* Broadcom specific */
-+#define MDIO_AUX_CTRL_STATUS_REG 0x18
-+#define MDIO_BC_FULL_DUPLEX_IND 0x1
-+#define MDIO_BC_SPEED 0x2
-+
-+/* TDK specific */
-+#define MDIO_TDK_DIAGNOSTIC_REG 18
-+#define MDIO_TDK_DIAGNOSTIC_RATE 0x400
-+#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800
-+
-+/*Intel LXT972A specific*/
-+#define MDIO_INT_STATUS_REG_2 0x0011
-+#define MDIO_INT_FULL_DUPLEX_IND ( 0x0001 << 9 )
-+#define MDIO_INT_SPEED ( 0x0001 << 14 )
-+
-+/*National Semiconductor DP83865 specific*/
-+#define MDIO_NAT_LINK_AN_REG 0x11
-+#define MDIO_NAT_1000 (0x0001 << 4)
-+#define MDIO_NAT_100 (0x0001 << 3)
-+#define MDIO_NAT_FULL_DUPLEX_IND (0x0001 << 1)
-+
-+/* Vitesse VCS8641 specific */
-+#define MDIO_VIT_AUX_STAT 0x1c
-+#define MDIO_VIT_1000 (0x2 << 3)
-+#define MDIO_VIT_100 (0x1 << 3)
-+#define MDIO_VIT_10 0
-+#define MDIO_VIT_FD (0x1 << 5)
-+
-+/* Davicom DM9161 specific */
-+#define DM9161_OUI 0x606E
-+#define MII_DM9161_SCR 0x10
-+#define MII_DM9161_SCR_INIT 0x0610
-+#define MII_DM9161_SCR_RMII 0x0100
-+#define MII_DM9161_10BTCSR 0x12
-+#define MII_DM9161_10BTCSR_INIT 0x7800
-+
-+/* Network flash constants */
-+#define NET_FLASH_TIME (HZ/50) /* 20 ms */
-+#define NET_FLASH_PAUSE (HZ/100) /* 10 ms */
-+#define NET_LINK_UP_CHECK_INTERVAL (2*HZ) /* 2 seconds. */
-+#define NET_DUPLEX_CHECK_INTERVAL (2*HZ) /* 2 seconds. */
-+
-+/* Duplex settings. */
-+enum duplex {
-+ half,
-+ full,
-+ autoneg
-+};
-+
-+/* Some transceivers requires special handling. */
-+struct transceiver_ops {
-+ unsigned int oui;
-+ void (*check_speed) (struct net_device * dev);
-+ void (*check_duplex) (struct net_device * dev);
-+};
-+
-+typedef struct crisv32_eth_descr {
-+ dma_descr_data descr __attribute__ ((__aligned__(32)));
-+ struct sk_buff *skb;
-+ unsigned char *linearized_packet;
-+} crisv32_eth_descr;
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+struct tx_buffer_list {
-+ struct tx_buffer_list *next;
-+ unsigned char *buf;
-+ char free;
-+};
-+#endif
-+
-+/* LED stuff */
-+#define CRIS_LED_GRP_0 0
-+#define CRIS_LED_GRP_1 1
-+#define CRIS_LED_GRP_NONE 2
-+
-+#define CRIS_LED_ACTIVITY 0
-+#define CRIS_LED_NOACTIVITY 1
-+#define CRIS_LED_LINK 2
-+#define CRIS_LED_NOLINK 3
-+
-+struct crisv32_eth_leds {
-+ unsigned int ledgrp;
-+ int led_active;
-+ unsigned long led_next_time;
-+ struct timer_list clear_led_timer;
-+ spinlock_t led_lock; /* Protect LED state */
-+ int ifisup[2];
-+};
-+
-+#define NET_LED_SET(x,y) \
-+ do { \
-+ if (x == 0) CRIS_LED_NETWORK_GRP0_SET(y); \
-+ if (x == 1) CRIS_LED_NETWORK_GRP1_SET(y); \
-+ } while (0)
-+
-+/* Information that need to be kept for each device. */
-+struct crisv32_ethernet_local {
-+ /* FIXME: These align attributes don't really help. If they are really
-+ * needed alignment has to be enforced at runtime, these objects
-+ * are dynamically allocated. */
-+ dma_descr_context ctxt_in __attribute__ ((__aligned__(32)));
-+ dma_descr_context ctxt_out __attribute__ ((__aligned__(32)));
-+
-+ crisv32_eth_descr dma_rx_descr_list[NBR_RX_DESC];
-+ crisv32_eth_descr dma_tx_descr_list[NBR_TX_DESC];
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ struct tx_buffer_list tx_intmem_buf_list[NBR_INTMEM_TX_BUF];
-+ struct tx_buffer_list *intmem_tx_buf_active;
-+ struct tx_buffer_list *intmem_tx_buf_catch;
-+ int gigabit_mode;
-+#endif
-+ /* Transmit data path. */
-+ int dma_out_inst;
-+ int sender_started;
-+
-+ /* TX-ring state. */
-+ crisv32_eth_descr *active_tx_desc;
-+ crisv32_eth_descr *prev_tx_desc;
-+ crisv32_eth_descr *catch_tx_desc;
-+ int txpackets;
-+ int retrans;
-+ int do_tx_recovery;
-+ struct timer_list transmit_timer;
-+
-+ /* Receive data path. */
-+ struct napi_struct napi;
-+ int dma_in_inst;
-+
-+ /* RX-ring state. */
-+ crisv32_eth_descr *active_rx_desc;
-+ crisv32_eth_descr *prev_rx_desc;
-+ crisv32_eth_descr *last_rx_desc;
-+
-+ unsigned long newbuf;
-+ u8 new_rx_package;
-+ u8 pending_overrun;
-+ u8 overrun_set;
-+ u8 link;
-+ int napi_processing;
-+ struct timer_list receive_timer;
-+ struct work_struct receive_work;
-+ reg_eth_rw_rec_ctrl saved_rec_ctrl;
-+ int saved_ga_lo;
-+ int saved_ga_hi;
-+ int do_rx_recovery;
-+
-+ /* Control paths. */
-+ spinlock_t lock;
-+ struct net_device *dev;
-+ int eth_inst;
-+
-+ /* Toggle network LEDs usage at runtime */
-+ int use_leds;
-+ struct crisv32_eth_leds *leds;
-+
-+ /* PHY control. */
-+ int fixed_phy;
-+ spinlock_t transceiver_lock; /* Protect transceiver state. */
-+ struct transceiver_ops *transceiver;
-+ struct mii_if_info mii_if;
-+
-+ /* Specifies if we should do autonegotiation or not.
-+ * TODO: This ad-hoc hack should be removed. Ethtool already supports
-+ * this kind of control.
-+ */
-+ int autoneg_normal;
-+
-+ struct timer_list duplex_timer;
-+ int full_duplex;
-+ enum duplex current_duplex;
-+
-+ struct timer_list speed_timer;
-+ int current_speed; /* Speed read from tranceiver */
-+ int current_speed_selection; /* Speed selected by user */
-+
-+ /* Statistics. */
-+ u64 tx_dma_restarts;
-+ u64 tx_mac_resets;
-+ u64 rx_dma_restarts;
-+ u64 rx_dma_timeouts;
-+ u64 rx_restarts_dropped;
-+
-+ struct net_device_stats stats;
-+};
-+
-+/* Function prototypes. */
-+static int crisv32_ethernet_init(void);
-+static int crisv32_ethernet_device_init(struct net_device *dev);
-+static int crisv32_eth_open(struct net_device *dev);
-+static int crisv32_eth_close(struct net_device *dev);
-+static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr);
-+static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id);
-+static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id);
-+static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id);
-+static int crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev);
-+static void crisv32_eth_hw_send_packet(unsigned char *buf, int length,
-+ void *priv);
-+static void crisv32_eth_do_tx_recovery(struct net_device *dev);
-+static void crisv32_eth_set_rx_mode(struct net_device *dev);
-+static int crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr,
-+ int cmd);
-+static int crisv32_eth_set_config(struct net_device *dev, struct ifmap *map);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+static void crisv32_eth_switch_intmem_usage(struct net_device *dev);
-+#endif
-+static void crisv32_eth_negotiate(struct net_device *dev);
-+static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed);
-+#ifndef CONFIG_ETRAX_NO_PHY
-+static void crisv32_eth_check_duplex(unsigned long idev);
-+static void crisv32_eth_check_speed(unsigned long idev);
-+#endif
-+
-+static void crisv32_eth_set_duplex(struct net_device *dev, enum duplex);
-+static int crisv32_eth_probe_transceiver(struct net_device *dev);
-+
-+static struct ethtool_ops crisv32_ethtool_ops;
-+
-+#ifndef CONFIG_ETRAX_NO_PHY
-+static void generic_check_speed(struct net_device *dev);
-+static void generic_check_duplex(struct net_device *dev);
-+static void broadcom_check_speed(struct net_device *dev);
-+static void broadcom_check_duplex(struct net_device *dev);
-+static void tdk_check_speed(struct net_device *dev);
-+static void tdk_check_duplex(struct net_device *dev);
-+static void intel_check_speed(struct net_device *dev);
-+static void intel_check_duplex(struct net_device *dev);
-+static void national_check_speed(struct net_device *dev);
-+static void national_check_duplex(struct net_device *dev);
-+static void vitesse_check_speed(struct net_device *dev);
-+static void vitesse_check_duplex(struct net_device *dev);
-+static void davicom_check_speed(struct net_device *dev);
-+static void davicom_check_duplex(struct net_device *dev);
-+#endif
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void crisv32_netpoll(struct net_device *dev);
-+#endif
-+
-+static void crisv32_clear_network_leds(unsigned long dummy);
-+static void crisv32_set_network_leds(int active, struct net_device *dev);
-+
-+static int crisv32_eth_get_mdio_reg(struct net_device *dev,
-+ int phyid, int reg_num);
-+static void crisv32_eth_set_mdio_reg(struct net_device *dev,
-+ int phyid, int reg_num, int val);
-+static void crisv32_eth_send_mdio_cmd(struct net_device *dev,
-+ unsigned short cmd, int write_cmd);
-+static void crisv32_eth_send_mdio_bit(struct net_device *dev,
-+ unsigned char bit);
-+static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev);
-+
-+static struct net_device_stats *crisv32_get_stats(struct net_device *dev);
-+static void crisv32_start_dma_out(struct crisv32_ethernet_local *np);
-+
-+#endif /* _ETRAX_ETHERNET_H_ */