add basic raspberry pi3 support (ARM 32Bit)

3 files changed, 47 insertions, 30 deletions

diff --git a/target/arm/Makefile b/target/arm/Makefile
index 3184351e1..faa4b6cd7 100644
--- a/target/arm/Makefile
+++ b/target/arm/Makefile
@@ -50,30 +50,16 @@ ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM_VEXPRESS_A9)$(ADK_TARGET_SYSTEM_QEMU_ARM_VERS
 	@echo "Start qemu with following options:"
 	@echo 'qemu-system-${ADK_TARGET_CPU_ARCH} ${QEMU_ARGS} -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${ADK_TARGET_CPU_ARCH}.img'
 endif
-ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI),y)
+ifeq ($(ADK_TARGET_BOARD_BCM28XX)$(ADK_TARGET_SYSTEM_SOLIDRUN_IMX6),y)
 ifeq ($(ADK_APPLIANCE_KODI),y)
 	@echo "Use following command to install with a writable data partition"
-	@echo "sudo ./scripts/install.sh -d 256 raspberry-pi /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
+	@echo "sudo ./scripts/install.sh -d 256 $(ADK_TARGET_SYSTEM) /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "If you want to update a card without loosing existing data on the writable partition use:"
-	@echo "sudo ./scripts/install.sh -k -d 256 raspbrry-pi /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
+	@echo "sudo ./scripts/install.sh -k -d 256 $(ADK_TARGET_SYSTEM) /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "In both cases the cfgfs partition is _not_ removed!"
 else
 	@echo "Use following command to install it on SD card:"
-	@echo "sudo ./scripts/install.sh raspberry-pi /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
-endif
-endif
-ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI2),y)
-ifeq ($(ADK_APPLIANCE_KODI),y)
-	@echo "Use following command to install with a writable data partition"
-	@echo "sudo ./scripts/install.sh -d 256 raspberry-pi2 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
-	@echo "If you want to update a card without loosing existing data on the writable partition use:"
-	@echo "sudo ./scripts/install.sh -k -d 256 raspberry-pi2 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
-	@echo "In both cases the cfgfs partition is _not_ removed!"
-else
-	@echo "Use following command to install it on SD card:"
-	@echo "sudo ./scripts/install.sh raspberry-pi2 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
-	@echo "Use following command to install with a writable data partition"
-	@echo "sudo ./scripts/install.sh -d 256 raspberry-pi2 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
+	@echo "sudo ./scripts/install.sh $(ADK_TARGET_SYSTEM) /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
 endif
 ifeq ($(ADK_TARGET_SYSTEM_BANANA_PRO),y)
@@ -82,18 +68,6 @@ ifeq ($(ADK_TARGET_SYSTEM_BANANA_PRO),y)
 	@echo "Use following command to install with a writable data partition"
 	@echo "sudo ./scripts/install.sh -d 256 banana-pro /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
-ifeq ($(ADK_TARGET_SYSTEM_SOLIDRUN_IMX6),y)
-ifeq ($(ADK_APPLIANCE_KODI),y)
-	@echo "Use following command to install with a writable data partition"
-	@echo "sudo ./scripts/install.sh -d 256 solidrun-imx6 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
-	@echo "If you want to update a card without loosing existing data on the writable partition use:"
-	@echo "sudo ./scripts/install.sh -k -d 256 solidrun-imx6 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
-	@echo "In both cases the cfgfs partition is _not_ removed!"
-else
-	@echo "Use following command to install it on SD card:"
-	@echo "sudo ./scripts/install.sh solidrun-imx6 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
-endif
-endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 targethelp:
diff --git a/target/arm/kernel/raspberry-pi3 b/target/arm/kernel/raspberry-pi3
new file mode 100644
index 000000000..dd55d7ddf
--- /dev/null
+++ b/target/arm/kernel/raspberry-pi3
@@ -0,0 +1,18 @@
+CONFIG_ARM=y
+CONFIG_ARCH_BCM2709=y
+CONFIG_BCM2709_DT=y
+CONFIG_PHYS_OFFSET=0
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_FIQ=y
+CONFIG_ATAGS=y
+CONFIG_KUSER_HELPERS=y
+CONFIG_ARM_ERRATA_643719=y
+CONFIG_BCM2708_NOL2CACHE=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_BRCM_CHAR_DRIVERS=y
+CONFIG_BCM2708_VCHIQ=y
+CONFIG_BCM2708_VCMEM=y
+CONFIG_MAILBOX=y
+CONFIG_BCM2835_MBOX=y
+CONFIG_OF=y
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
diff --git a/target/arm/systems/raspberry-pi3 b/target/arm/systems/raspberry-pi3
new file mode 100644
index 000000000..6c34586c4
--- /dev/null
+++ b/target/arm/systems/raspberry-pi3
@@ -0,0 +1,25 @@
+config ADK_TARGET_SYSTEM_RASPBERRY_PI3
+	bool "Raspberry PI 3"
+	depends on ADK_TARGET_LITTLE_ENDIAN
+	select ADK_TARGET_CPU_ARM_CORTEX_A53
+	select ADK_TARGET_BOARD_BCM28XX
+	select ADK_TARGET_WITH_VGA
+	select ADK_TARGET_WITH_SERIAL
+	select ADK_TARGET_WITH_CPU_FREQ
+	select ADK_TARGET_WITH_USB
+	select ADK_TARGET_WITH_INPUT
+	select ADK_TARGET_WITH_SD
+	select ADK_TARGET_WITH_I2C
+	select ADK_TARGET_WITH_SPI
+	select ADK_TARGET_WITH_SMP
+	select ADK_TARGET_WITH_NET
+	select ADK_TARGET_WITH_NETDEVICE
+	select ADK_TARGET_WITH_BLOCK
+	select ADK_TARGET_WITH_SOUND
+	select ADK_PACKAGE_BCM28XX_BOOTLOADER
+	select ADK_TARGET_WITH_ROOT_RW
+	select ADK_TARGET_KERNEL_ZIMAGE
+	select ADK_TARGET_KERNEL_WITH_COMPRESSION
+	help
+	  Raspberry PI 3
+