summaryrefslogtreecommitdiff
path: root/target/arm/solidrun-imx6/patches
diff options
context:
space:
mode:
authorWaldemar Brodkorb <wbx@openadk.org>2015-03-02 18:54:09 +0100
committerWaldemar Brodkorb <wbx@openadk.org>2015-03-02 18:54:09 +0100
commitfde3043e3f9cc58b2b4639f2bb2f6d1ac6b15ed2 (patch)
tree59dce32391123f41066e4987b60864c3e05fbbc0 /target/arm/solidrun-imx6/patches
parent4876df8cb79b2bac3ba9ae02b3609f8d63309c16 (diff)
add wlan support for 3.18.x via Russel King patches. 0086-0090
Diffstat (limited to 'target/arm/solidrun-imx6/patches')
-rw-r--r--target/arm/solidrun-imx6/patches/3.18.8/solidrun-imx6-wlan.patch3252
1 files changed, 3252 insertions, 0 deletions
diff --git a/target/arm/solidrun-imx6/patches/3.18.8/solidrun-imx6-wlan.patch b/target/arm/solidrun-imx6/patches/3.18.8/solidrun-imx6-wlan.patch
new file mode 100644
index 000000000..3ab3081db
--- /dev/null
+++ b/target/arm/solidrun-imx6/patches/3.18.8/solidrun-imx6-wlan.patch
@@ -0,0 +1,3252 @@
+diff -Nur linux-3.18.8.orig/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi linux-3.18.8/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+--- linux-3.18.8.orig/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi 2015-02-27 02:49:36.000000000 +0100
++++ linux-3.18.8/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi 2015-03-02 03:23:14.000000000 +0100
+@@ -170,6 +170,28 @@
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+ >;
+ };
++
++ pinctrl_cubox_i_usdhc2_100mhz: cubox-i-usdhc2-100mhz {
++ fsl,pins = <
++ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
++ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
++ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
++ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
++ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
++ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
++ >;
++ };
++
++ pinctrl_cubox_i_usdhc2_200mhz: cubox-i-usdhc2-200mhz {
++ fsl,pins = <
++ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
++ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
++ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
++ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
++ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
++ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
++ >;
++ };
+ };
+ };
+
+@@ -194,8 +216,10 @@
+ };
+
+ &usdhc2 {
+- pinctrl-names = "default";
++ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
++ pinctrl-1 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2_100mhz>;
++ pinctrl-2 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2_200mhz>;
+ vmmc-supply = <&reg_3p3v>;
+ cd-gpios = <&gpio1 4 0>;
+ status = "okay";
+diff -Nur linux-3.18.8.orig/arch/arm/boot/dts/imx6qdl-microsom.dtsi linux-3.18.8/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+--- linux-3.18.8.orig/arch/arm/boot/dts/imx6qdl-microsom.dtsi 2015-02-27 02:49:36.000000000 +0100
++++ linux-3.18.8/arch/arm/boot/dts/imx6qdl-microsom.dtsi 2015-03-02 02:58:12.000000000 +0100
+@@ -1,15 +1,95 @@
+ /*
+ * Copyright (C) 2013,2014 Russell King
+ */
++#include <dt-bindings/gpio/gpio.h>
++/ {
++ regulators {
++ compatible = "simple-bus";
++
++ reg_brcm_osc: brcm-osc-reg {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio5 5 0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_microsom_brcm_osc_reg>;
++ regulator-name = "brcm_osc_reg";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ regulator-boot-on;
++ };
++
++ reg_brcm: brcm-reg {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio3 19 0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
++ regulator-name = "brcm_reg";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ startup-delay-us = <200000>;
++ };
++ };
++};
+
+ &iomuxc {
+ microsom {
++ pinctrl_microsom_brcm_bt: microsom-brcm-bt {
++ fsl,pins = <
++ MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070
++ MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070
++ MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070
++ >;
++ };
++
++ pinctrl_microsom_brcm_osc_reg: microsom-brcm-osc-reg {
++ fsl,pins = <
++ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
++ >;
++ };
++
++ pinctrl_microsom_brcm_reg: microsom-brcm-reg {
++ fsl,pins = <
++ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070
++ >;
++ };
++
++ pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
++ fsl,pins = <
++ MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0
++ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070
++ MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070
++ MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070
++ >;
++ };
++
+ pinctrl_microsom_uart1: microsom-uart1 {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
++
++ pinctrl_microsom_uart4_1: microsom-uart4 {
++ fsl,pins = <
++ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
++ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
++ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
++ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
++ >;
++ };
++
++ pinctrl_microsom_usdhc1: microsom-usdhc1 {
++ fsl,pins = <
++ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
++ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
++ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
++ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
++ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
++ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
++ >;
++ };
+ };
+ };
+
+@@ -18,3 +98,23 @@
+ pinctrl-0 = <&pinctrl_microsom_uart1>;
+ status = "okay";
+ };
++
++/* UART4 - Connected to optional BRCM Wifi/BT/FM */
++&uart4 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4_1>;
++ fsl,uart-has-rtscts;
++ status = "okay";
++};
++
++/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
++&usdhc1 {
++ card-external-vcc-supply = <&reg_brcm>;
++ card-reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>, <&gpio6 0 GPIO_ACTIVE_LOW>;
++ keep-power-in-suspend;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
++ vmmc-supply = <&reg_brcm>;
++ status = "okay";
++};
+diff -Nur linux-3.18.8.orig/Documentation/devicetree/bindings/mmc/mmc.txt linux-3.18.8/Documentation/devicetree/bindings/mmc/mmc.txt
+--- linux-3.18.8.orig/Documentation/devicetree/bindings/mmc/mmc.txt 2015-02-27 02:49:36.000000000 +0100
++++ linux-3.18.8/Documentation/devicetree/bindings/mmc/mmc.txt 2015-03-02 03:25:33.000000000 +0100
+@@ -5,6 +5,8 @@
+ Interpreted by the OF core:
+ - reg: Registers location and length.
+ - interrupts: Interrupts used by the MMC controller.
++- clocks: Clocks needed for the host controller, if any.
++- clock-names: Goes with clocks above.
+
+ Card detection:
+ If no property below is supplied, host native card detect is used.
+@@ -43,6 +45,15 @@
+ - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
+ programmed with. Valid range: [0 .. 0xffff].
+
++Card power and reset control:
++The following properties can be specified for cases where the MMC
++peripheral needs additional reset, regulator and clock lines. It is for
++example common for WiFi/BT adapters to have these separate from the main
++MMC bus:
++ - card-reset-gpios: Specify GPIOs for card reset (reset active low)
++ - card-external-vcc-supply: Regulator to drive (independent) card VCC
++ - clock with name "card_ext_clock": External clock provided to the card
++
+ *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
+ polarity properties, we have to fix the meaning of the "normal" and "inverted"
+ line levels. We choose to follow the SDHCI standard, which specifies both those
+diff -Nur linux-3.18.8.orig/drivers/mmc/core/core.c linux-3.18.8/drivers/mmc/core/core.c
+--- linux-3.18.8.orig/drivers/mmc/core/core.c 2015-02-27 02:49:36.000000000 +0100
++++ linux-3.18.8/drivers/mmc/core/core.c 2015-03-02 03:25:33.000000000 +0100
+@@ -13,11 +13,13 @@
+ #include <linux/module.h>
+ #include <linux/init.h>
+ #include <linux/interrupt.h>
++#include <linux/clk.h>
+ #include <linux/completion.h>
+ #include <linux/device.h>
+ #include <linux/delay.h>
+ #include <linux/pagemap.h>
+ #include <linux/err.h>
++#include <linux/gpio/consumer.h>
+ #include <linux/leds.h>
+ #include <linux/scatterlist.h>
+ #include <linux/log2.h>
+@@ -1507,6 +1509,43 @@
+ mmc_host_clk_release(host);
+ }
+
++static void mmc_card_power_up(struct mmc_host *host)
++{
++ int i;
++ struct gpio_desc **gds = host->card_reset_gpios;
++
++ for (i = 0; i < ARRAY_SIZE(host->card_reset_gpios); i++) {
++ if (gds[i]) {
++ dev_dbg(host->parent, "Asserting reset line %d", i);
++ gpiod_set_value(gds[i], 1);
++ }
++ }
++
++ if (host->card_regulator) {
++ dev_dbg(host->parent, "Enabling external regulator");
++ if (regulator_enable(host->card_regulator))
++ dev_err(host->parent, "Failed to enable external regulator");
++ }
++
++ if (host->card_clk) {
++ dev_dbg(host->parent, "Enabling external clock");
++ clk_prepare_enable(host->card_clk);
++ }
++
++ /* 2ms delay to let clocks and power settle */
++ mmc_delay(20);
++
++ for (i = 0; i < ARRAY_SIZE(host->card_reset_gpios); i++) {
++ if (gds[i]) {
++ dev_dbg(host->parent, "Deasserting reset line %d", i);
++ gpiod_set_value(gds[i], 0);
++ }
++ }
++
++ /* 2ms delay to after reset release */
++ mmc_delay(20);
++}
++
+ /*
+ * Apply power to the MMC stack. This is a two-stage process.
+ * First, we enable power to the card without the clock running.
+@@ -1523,6 +1562,9 @@
+ if (host->ios.power_mode == MMC_POWER_ON)
+ return;
+
++ /* Power up the card/module first, if needed */
++ mmc_card_power_up(host);
++
+ mmc_host_clk_hold(host);
+
+ host->ios.vdd = fls(ocr) - 1;
+diff -Nur linux-3.18.8.orig/drivers/mmc/core/host.c linux-3.18.8/drivers/mmc/core/host.c
+--- linux-3.18.8.orig/drivers/mmc/core/host.c 2015-02-27 02:49:36.000000000 +0100
++++ linux-3.18.8/drivers/mmc/core/host.c 2015-03-02 03:26:23.000000000 +0100
+@@ -12,14 +12,18 @@
+ * MMC host class device management
+ */
+
++#include <linux/kernel.h>
++#include <linux/clk.h>
+ #include <linux/device.h>
+ #include <linux/err.h>
++#include <linux/gpio/consumer.h>
+ #include <linux/idr.h>
+ #include <linux/of.h>
+ #include <linux/of_gpio.h>
+ #include <linux/pagemap.h>
+ #include <linux/export.h>
+ #include <linux/leds.h>
++#include <linux/regulator/consumer.h>
+ #include <linux/slab.h>
+ #include <linux/suspend.h>
+
+@@ -466,6 +470,66 @@
+
+ EXPORT_SYMBOL(mmc_of_parse);
+
++static int mmc_of_parse_child(struct mmc_host *host)
++{
++ struct device_node *np;
++ struct clk *clk;
++ int i;
++
++ if (!host->parent || !host->parent->of_node)
++ return 0;
++
++ np = host->parent->of_node;
++
++ host->card_regulator = regulator_get(host->parent, "card-external-vcc");
++ if (IS_ERR(host->card_regulator)) {
++ if (PTR_ERR(host->card_regulator) == -EPROBE_DEFER)
++ return PTR_ERR(host->card_regulator);
++ host->card_regulator = NULL;
++ }
++
++ /* Parse card power/reset/clock control */
++ if (of_find_property(np, "card-reset-gpios", NULL)) {
++ struct gpio_desc *gpd;
++ int level = 0;
++
++ /*
++ * If the regulator is enabled, then we can hold the
++ * card in reset with an active high resets. Otherwise,
++ * hold the resets low.
++ */
++ if (host->card_regulator && regulator_is_enabled(host->card_regulator))
++ level = 1;
++
++ for (i = 0; i < ARRAY_SIZE(host->card_reset_gpios); i++) {
++ gpd = devm_gpiod_get_index(host->parent, "card-reset", i);
++ if (IS_ERR(gpd)) {
++ if (PTR_ERR(gpd) == -EPROBE_DEFER)
++ return PTR_ERR(gpd);
++ break;
++ }
++ gpiod_direction_output(gpd, gpiod_is_active_low(gpd) | level);
++ host->card_reset_gpios[i] = gpd;
++ }
++
++ gpd = devm_gpiod_get_index(host->parent, "card-reset", ARRAY_SIZE(host->card_reset_gpios));
++ if (!IS_ERR(gpd)) {
++ dev_warn(host->parent, "More reset gpios than we can handle");
++ gpiod_put(gpd);
++ }
++ }
++
++ clk = of_clk_get_by_name(np, "card_ext_clock");
++ if (IS_ERR(clk)) {
++ if (PTR_ERR(clk) == -EPROBE_DEFER)
++ return PTR_ERR(clk);
++ clk = NULL;
++ }
++ host->card_clk = clk;
++
++ return 0;
++}
++
+ /**
+ * mmc_alloc_host - initialise the per-host structure.
+ * @extra: sizeof private data structure
+@@ -545,6 +609,10 @@
+ {
+ int err;
+
++ err = mmc_of_parse_child(host);
++ if (err)
++ return err;
++
+ WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
+ !host->ops->enable_sdio_irq);
+
+diff -Nur linux-3.18.8.orig/drivers/mmc/host/dw_mmc.c linux-3.18.8/drivers/mmc/host/dw_mmc.c
+--- linux-3.18.8.orig/drivers/mmc/host/dw_mmc.c 2015-02-27 02:49:36.000000000 +0100
++++ linux-3.18.8/drivers/mmc/host/dw_mmc.c 2015-03-02 03:25:56.000000000 +0100
+@@ -2211,6 +2211,8 @@
+ if (!mmc)
+ return -ENOMEM;
+
++ mmc_of_parse(mmc);
++
+ slot = mmc_priv(mmc);
+ slot->id = id;
+ slot->mmc = mmc;
+diff -Nur linux-3.18.8.orig/drivers/mmc/host/dw_mmc.c.orig linux-3.18.8/drivers/mmc/host/dw_mmc.c.orig
+--- linux-3.18.8.orig/drivers/mmc/host/dw_mmc.c.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-3.18.8/drivers/mmc/host/dw_mmc.c.orig 2015-02-27 02:49:36.000000000 +0100
+@@ -0,0 +1,2855 @@
++/*
++ * Synopsys DesignWare Multimedia Card Interface driver
++ * (Based on NXP driver for lpc 31xx)
++ *
++ * Copyright (C) 2009 NXP Semiconductors
++ * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/debugfs.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/seq_file.h>
++#include <linux/slab.h>
++#include <linux/stat.h>
++#include <linux/delay.h>
++#include <linux/irq.h>
++#include <linux/mmc/host.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/sd.h>
++#include <linux/mmc/sdio.h>
++#include <linux/mmc/dw_mmc.h>
++#include <linux/bitops.h>
++#include <linux/regulator/consumer.h>
++#include <linux/workqueue.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <linux/mmc/slot-gpio.h>
++
++#include "dw_mmc.h"
++
++/* Common flag combinations */
++#define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DRTO | SDMMC_INT_DCRC | \
++ SDMMC_INT_HTO | SDMMC_INT_SBE | \
++ SDMMC_INT_EBE)
++#define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \
++ SDMMC_INT_RESP_ERR)
++#define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \
++ DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE)
++#define DW_MCI_SEND_STATUS 1
++#define DW_MCI_RECV_STATUS 2
++#define DW_MCI_DMA_THRESHOLD 16
++
++#define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */
++#define DW_MCI_FREQ_MIN 400000 /* unit: HZ */
++
++#ifdef CONFIG_MMC_DW_IDMAC
++#define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
++ SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
++ SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
++ SDMMC_IDMAC_INT_TI)
++
++struct idmac_desc {
++ u32 des0; /* Control Descriptor */
++#define IDMAC_DES0_DIC BIT(1)
++#define IDMAC_DES0_LD BIT(2)
++#define IDMAC_DES0_FD BIT(3)
++#define IDMAC_DES0_CH BIT(4)
++#define IDMAC_DES0_ER BIT(5)
++#define IDMAC_DES0_CES BIT(30)
++#define IDMAC_DES0_OWN BIT(31)
++
++ u32 des1; /* Buffer sizes */
++#define IDMAC_SET_BUFFER1_SIZE(d, s) \
++ ((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
++
++ u32 des2; /* buffer 1 physical address */
++
++ u32 des3; /* buffer 2 physical address */
++};
++#endif /* CONFIG_MMC_DW_IDMAC */
++
++static bool dw_mci_reset(struct dw_mci *host);
++
++#if defined(CONFIG_DEBUG_FS)
++static int dw_mci_req_show(struct seq_file *s, void *v)
++{
++ struct dw_mci_slot *slot = s->private;
++ struct mmc_request *mrq;
++ struct mmc_command *cmd;
++ struct mmc_command *stop;
++ struct mmc_data *data;
++
++ /* Make sure we get a consistent snapshot */
++ spin_lock_bh(&slot->host->lock);
++ mrq = slot->mrq;
++
++ if (mrq) {
++ cmd = mrq->cmd;
++ data = mrq->data;
++ stop = mrq->stop;
++
++ if (cmd)
++ seq_printf(s,
++ "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
++ cmd->opcode, cmd->arg, cmd->flags,
++ cmd->resp[0], cmd->resp[1], cmd->resp[2],
++ cmd->resp[2], cmd->error);
++ if (data)
++ seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
++ data->bytes_xfered, data->blocks,
++ data->blksz, data->flags, data->error);
++ if (stop)
++ seq_printf(s,
++ "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
++ stop->opcode, stop->arg, stop->flags,
++ stop->resp[0], stop->resp[1], stop->resp[2],
++ stop->resp[2], stop->error);
++ }
++
++ spin_unlock_bh(&slot->host->lock);
++
++ return 0;
++}
++
++static int dw_mci_req_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, dw_mci_req_show, inode->i_private);
++}
++
++static const struct file_operations dw_mci_req_fops = {
++ .owner = THIS_MODULE,
++ .open = dw_mci_req_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static int dw_mci_regs_show(struct seq_file *s, void *v)
++{
++ seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS);
++ seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS);
++ seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD);
++ seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL);
++ seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK);
++ seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA);
++
++ return 0;
++}
++
++static int dw_mci_regs_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, dw_mci_regs_show, inode->i_private);
++}
++
++static const struct file_operations dw_mci_regs_fops = {
++ .owner = THIS_MODULE,
++ .open = dw_mci_regs_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static void dw_mci_init_debugfs(struct dw_mci_slot *slot)
++{
++ struct mmc_host *mmc = slot->mmc;
++ struct dw_mci *host = slot->host;
++ struct dentry *root;
++ struct dentry *node;
++
++ root = mmc->debugfs_root;
++ if (!root)
++ return;
++
++ node = debugfs_create_file("regs", S_IRUSR, root, host,
++ &dw_mci_regs_fops);
++ if (!node)
++ goto err;
++
++ node = debugfs_create_file("req", S_IRUSR, root, slot,
++ &dw_mci_req_fops);
++ if (!node)
++ goto err;
++
++ node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
++ if (!node)
++ goto err;
++
++ node = debugfs_create_x32("pending_events", S_IRUSR, root,
++ (u32 *)&host->pending_events);
++ if (!node)
++ goto err;
++
++ node = debugfs_create_x32("completed_events", S_IRUSR, root,
++ (u32 *)&host->completed_events);
++ if (!node)
++ goto err;
++
++ return;
++
++err:
++ dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
++}
++#endif /* defined(CONFIG_DEBUG_FS) */
++
++static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg);
++
++static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
++{
++ struct mmc_data *data;
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ struct dw_mci *host = slot->host;
++ const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
++ u32 cmdr;
++ cmd->error = -EINPROGRESS;
++
++ cmdr = cmd->opcode;
++
++ if (cmd->opcode == MMC_STOP_TRANSMISSION ||
++ cmd->opcode == MMC_GO_IDLE_STATE ||
++ cmd->opcode == MMC_GO_INACTIVE_STATE ||
++ (cmd->opcode == SD_IO_RW_DIRECT &&
++ ((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT))
++ cmdr |= SDMMC_CMD_STOP;
++ else if (cmd->opcode != MMC_SEND_STATUS && cmd->data)
++ cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
++
++ if (cmd->opcode == SD_SWITCH_VOLTAGE) {
++ u32 clk_en_a;
++
++ /* Special bit makes CMD11 not die */
++ cmdr |= SDMMC_CMD_VOLT_SWITCH;
++
++ /* Change state to continue to handle CMD11 weirdness */
++ WARN_ON(slot->host->state != STATE_SENDING_CMD);
++ slot->host->state = STATE_SENDING_CMD11;
++
++ /*
++ * We need to disable low power mode (automatic clock stop)
++ * while doing voltage switch so we don't confuse the card,
++ * since stopping the clock is a specific part of the UHS
++ * voltage change dance.
++ *
++ * Note that low power mode (SDMMC_CLKEN_LOW_PWR) will be
++ * unconditionally turned back on in dw_mci_setup_bus() if it's
++ * ever called with a non-zero clock. That shouldn't happen
++ * until the voltage change is all done.
++ */
++ clk_en_a = mci_readl(host, CLKENA);
++ clk_en_a &= ~(SDMMC_CLKEN_LOW_PWR << slot->id);
++ mci_writel(host, CLKENA, clk_en_a);
++ mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
++ SDMMC_CMD_PRV_DAT_WAIT, 0);
++ }
++
++ if (cmd->flags & MMC_RSP_PRESENT) {
++ /* We expect a response, so set this bit */
++ cmdr |= SDMMC_CMD_RESP_EXP;
++ if (cmd->flags & MMC_RSP_136)
++ cmdr |= SDMMC_CMD_RESP_LONG;
++ }
++
++ if (cmd->flags & MMC_RSP_CRC)
++ cmdr |= SDMMC_CMD_RESP_CRC;
++
++ data = cmd->data;
++ if (data) {
++ cmdr |= SDMMC_CMD_DAT_EXP;
++ if (data->flags & MMC_DATA_STREAM)
++ cmdr |= SDMMC_CMD_STRM_MODE;
++ if (data->flags & MMC_DATA_WRITE)
++ cmdr |= SDMMC_CMD_DAT_WR;
++ }
++
++ if (drv_data && drv_data->prepare_command)
++ drv_data->prepare_command(slot->host, &cmdr);
++
++ return cmdr;
++}
++
++static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
++{
++ struct mmc_command *stop;
++ u32 cmdr;
++
++ if (!cmd->data)
++ return 0;
++
++ stop = &host->stop_abort;
++ cmdr = cmd->opcode;
++ memset(stop, 0, sizeof(struct mmc_command));
++
++ if (cmdr == MMC_READ_SINGLE_BLOCK ||
++ cmdr == MMC_READ_MULTIPLE_BLOCK ||
++ cmdr == MMC_WRITE_BLOCK ||
++ cmdr == MMC_WRITE_MULTIPLE_BLOCK) {
++ stop->opcode = MMC_STOP_TRANSMISSION;
++ stop->arg = 0;
++ stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
++ } else if (cmdr == SD_IO_RW_EXTENDED) {
++ stop->opcode = SD_IO_RW_DIRECT;
++ stop->arg |= (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
++ ((cmd->arg >> 28) & 0x7);
++ stop->flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
++ } else {
++ return 0;
++ }
++
++ cmdr = stop->opcode | SDMMC_CMD_STOP |
++ SDMMC_CMD_RESP_CRC | SDMMC_CMD_RESP_EXP;
++
++ return cmdr;
++}
++
++static void dw_mci_start_command(struct dw_mci *host,
++ struct mmc_command *cmd, u32 cmd_flags)
++{
++ host->cmd = cmd;
++ dev_vdbg(host->dev,
++ "start command: ARGR=0x%08x CMDR=0x%08x\n",
++ cmd->arg, cmd_flags);
++
++ mci_writel(host, CMDARG, cmd->arg);
++ wmb();
++
++ mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
++}
++
++static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
++{
++ struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort;
++ dw_mci_start_command(host, stop, host->stop_cmdr);
++}
++
++/* DMA interface functions */
++static void dw_mci_stop_dma(struct dw_mci *host)
++{
++ if (host->using_dma) {
++ host->dma_ops->stop(host);
++ host->dma_ops->cleanup(host);
++ }
++
++ /* Data transfer was stopped by the interrupt handler */
++ set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
++}
++
++static int dw_mci_get_dma_dir(struct mmc_data *data)
++{
++ if (data->flags & MMC_DATA_WRITE)
++ return DMA_TO_DEVICE;
++ else
++ return DMA_FROM_DEVICE;
++}
++
++#ifdef CONFIG_MMC_DW_IDMAC
++static void dw_mci_dma_cleanup(struct dw_mci *host)
++{
++ struct mmc_data *data = host->data;
++
++ if (data)
++ if (!data->host_cookie)
++ dma_unmap_sg(host->dev,
++ data->sg,
++ data->sg_len,
++ dw_mci_get_dma_dir(data));
++}
++
++static void dw_mci_idmac_reset(struct dw_mci *host)
++{
++ u32 bmod = mci_readl(host, BMOD);
++ /* Software reset of DMA */
++ bmod |= SDMMC_IDMAC_SWRESET;
++ mci_writel(host, BMOD, bmod);
++}
++
++static void dw_mci_idmac_stop_dma(struct dw_mci *host)
++{
++ u32 temp;
++
++ /* Disable and reset the IDMAC interface */
++ temp = mci_readl(host, CTRL);
++ temp &= ~SDMMC_CTRL_USE_IDMAC;
++ temp |= SDMMC_CTRL_DMA_RESET;
++ mci_writel(host, CTRL, temp);
++
++ /* Stop the IDMAC running */
++ temp = mci_readl(host, BMOD);
++ temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB);
++ temp |= SDMMC_IDMAC_SWRESET;
++ mci_writel(host, BMOD, temp);
++}
++
++static void dw_mci_idmac_complete_dma(struct dw_mci *host)
++{
++ struct mmc_data *data = host->data;
++
++ dev_vdbg(host->dev, "DMA complete\n");
++
++ host->dma_ops->cleanup(host);
++
++ /*
++ * If the card was removed, data will be NULL. No point in trying to
++ * send the stop command or waiting for NBUSY in this case.
++ */
++ if (data) {
++ set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
++ tasklet_schedule(&host->tasklet);
++ }
++}
++
++static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
++ unsigned int sg_len)
++{
++ int i;
++ struct idmac_desc *desc = host->sg_cpu;
++
++ for (i = 0; i < sg_len; i++, desc++) {
++ unsigned int length = sg_dma_len(&data->sg[i]);
++ u32 mem_addr = sg_dma_address(&data->sg[i]);
++
++ /* Set the OWN bit and disable interrupts for this descriptor */
++ desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH;
++
++ /* Buffer length */
++ IDMAC_SET_BUFFER1_SIZE(desc, length);
++
++ /* Physical address to DMA to/from */
++ desc->des2 = mem_addr;
++ }
++
++ /* Set first descriptor */
++ desc = host->sg_cpu;
++ desc->des0 |= IDMAC_DES0_FD;
++
++ /* Set last descriptor */
++ desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
++ desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
++ desc->des0 |= IDMAC_DES0_LD;
++
++ wmb();
++}
++
++static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
++{
++ u32 temp;
++
++ dw_mci_translate_sglist(host, host->data, sg_len);
++
++ /* Select IDMAC interface */
++ temp = mci_readl(host, CTRL);
++ temp |= SDMMC_CTRL_USE_IDMAC;
++ mci_writel(host, CTRL, temp);
++
++ wmb();
++
++ /* Enable the IDMAC */
++ temp = mci_readl(host, BMOD);
++ temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
++ mci_writel(host, BMOD, temp);
++
++ /* Start it running */
++ mci_writel(host, PLDMND, 1);
++}
++
++static int dw_mci_idmac_init(struct dw_mci *host)
++{
++ struct idmac_desc *p;
++ int i;
++
++ /* Number of descriptors in the ring buffer */
++ host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
++
++ /* Forward link the descriptor list */
++ for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
++ p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
++
++ /* Set the last descriptor as the end-of-ring descriptor */
++ p->des3 = host->sg_dma;
++ p->des0 = IDMAC_DES0_ER;
++
++ dw_mci_idmac_reset(host);
++
++ /* Mask out interrupts - get Tx & Rx complete only */
++ mci_writel(host, IDSTS, IDMAC_INT_CLR);
++ mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
++ SDMMC_IDMAC_INT_TI);
++
++ /* Set the descriptor base address */
++ mci_writel(host, DBADDR, host->sg_dma);
++ return 0;
++}
++
++static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
++ .init = dw_mci_idmac_init,
++ .start = dw_mci_idmac_start_dma,
++ .stop = dw_mci_idmac_stop_dma,
++ .complete = dw_mci_idmac_complete_dma,
++ .cleanup = dw_mci_dma_cleanup,
++};
++#endif /* CONFIG_MMC_DW_IDMAC */
++
++static int dw_mci_pre_dma_transfer(struct dw_mci *host,
++ struct mmc_data *data,
++ bool next)
++{
++ struct scatterlist *sg;
++ unsigned int i, sg_len;
++
++ if (!next && data->host_cookie)
++ return data->host_cookie;
++
++ /*
++ * We don't do DMA on "complex" transfers, i.e. with
++ * non-word-aligned buffers or lengths. Also, we don't bother
++ * with all the DMA setup overhead for short transfers.
++ */
++ if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD)
++ return -EINVAL;
++
++ if (data->blksz & 3)
++ return -EINVAL;
++
++ for_each_sg(data->sg, sg, data->sg_len, i) {
++ if (sg->offset & 3 || sg->length & 3)
++ return -EINVAL;
++ }
++
++ sg_len = dma_map_sg(host->dev,
++ data->sg,
++ data->sg_len,
++ dw_mci_get_dma_dir(data));
++ if (sg_len == 0)
++ return -EINVAL;
++
++ if (next)
++ data->host_cookie = sg_len;
++
++ return sg_len;
++}
++
++static void dw_mci_pre_req(struct mmc_host *mmc,
++ struct mmc_request *mrq,
++ bool is_first_req)
++{
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ struct mmc_data *data = mrq->data;
++
++ if (!slot->host->use_dma || !data)
++ return;
++
++ if (data->host_cookie) {
++ data->host_cookie = 0;
++ return;
++ }
++
++ if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0)
++ data->host_cookie = 0;
++}
++
++static void dw_mci_post_req(struct mmc_host *mmc,
++ struct mmc_request *mrq,
++ int err)
++{
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ struct mmc_data *data = mrq->data;
++
++ if (!slot->host->use_dma || !data)
++ return;
++
++ if (data->host_cookie)
++ dma_unmap_sg(slot->host->dev,
++ data->sg,
++ data->sg_len,
++ dw_mci_get_dma_dir(data));
++ data->host_cookie = 0;
++}
++
++static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
++{
++#ifdef CONFIG_MMC_DW_IDMAC
++ unsigned int blksz = data->blksz;
++ const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
++ u32 fifo_width = 1 << host->data_shift;
++ u32 blksz_depth = blksz / fifo_width, fifoth_val;
++ u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
++ int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
++
++ tx_wmark = (host->fifo_depth) / 2;
++ tx_wmark_invers = host->fifo_depth - tx_wmark;
++
++ /*
++ * MSIZE is '1',
++ * if blksz is not a multiple of the FIFO width
++ */
++ if (blksz % fifo_width) {
++ msize = 0;
++ rx_wmark = 1;
++ goto done;
++ }
++
++ do {
++ if (!((blksz_depth % mszs[idx]) ||
++ (tx_wmark_invers % mszs[idx]))) {
++ msize = idx;
++ rx_wmark = mszs[idx] - 1;
++ break;
++ }
++ } while (--idx > 0);
++ /*
++ * If idx is '0', it won't be tried
++ * Thus, initial values are uesed
++ */
++done:
++ fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
++ mci_writel(host, FIFOTH, fifoth_val);
++#endif
++}
++
++static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
++{
++ unsigned int blksz = data->blksz;
++ u32 blksz_depth, fifo_depth;
++ u16 thld_size;
++
++ WARN_ON(!(data->flags & MMC_DATA_READ));
++
++ /*
++ * CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
++ * in the FIFO region, so we really shouldn't access it).
++ */
++ if (host->verid < DW_MMC_240A)
++ return;
++
++ if (host->timing != MMC_TIMING_MMC_HS200 &&
++ host->timing != MMC_TIMING_UHS_SDR104)
++ goto disable;
++
++ blksz_depth = blksz / (1 << host->data_shift);
++ fifo_depth = host->fifo_depth;
++
++ if (blksz_depth > fifo_depth)
++ goto disable;
++
++ /*
++ * If (blksz_depth) >= (fifo_depth >> 1), should be 'thld_size <= blksz'
++ * If (blksz_depth) < (fifo_depth >> 1), should be thld_size = blksz
++ * Currently just choose blksz.
++ */
++ thld_size = blksz;
++ mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1));
++ return;
++
++disable:
++ mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0));
++}
++
++static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
++{
++ int sg_len;
++ u32 temp;
++
++ host->using_dma = 0;
++
++ /* If we don't have a channel, we can't do DMA */
++ if (!host->use_dma)
++ return -ENODEV;
++
++ sg_len = dw_mci_pre_dma_transfer(host, data, 0);
++ if (sg_len < 0) {
++ host->dma_ops->stop(host);
++ return sg_len;
++ }
++
++ host->using_dma = 1;
++
++ dev_vdbg(host->dev,
++ "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
++ (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
++ sg_len);
++
++ /*
++ * Decide the MSIZE and RX/TX Watermark.
++ * If current block size is same with previous size,
++ * no need to update fifoth.
++ */
++ if (host->prev_blksz != data->blksz)
++ dw_mci_adjust_fifoth(host, data);
++
++ /* Enable the DMA interface */
++ temp = mci_readl(host, CTRL);
++ temp |= SDMMC_CTRL_DMA_ENABLE;
++ mci_writel(host, CTRL, temp);
++
++ /* Disable RX/TX IRQs, let DMA handle it */
++ temp = mci_readl(host, INTMASK);
++ temp &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR);
++ mci_writel(host, INTMASK, temp);
++
++ host->dma_ops->start(host, sg_len);
++
++ return 0;
++}
++
++static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
++{
++ u32 temp;
++
++ data->error = -EINPROGRESS;
++
++ WARN_ON(host->data);
++ host->sg = NULL;
++ host->data = data;
++
++ if (data->flags & MMC_DATA_READ) {
++ host->dir_status = DW_MCI_RECV_STATUS;
++ dw_mci_ctrl_rd_thld(host, data);
++ } else {
++ host->dir_status = DW_MCI_SEND_STATUS;
++ }
++
++ if (dw_mci_submit_data_dma(host, data)) {
++ int flags = SG_MITER_ATOMIC;
++ if (host->data->flags & MMC_DATA_READ)
++ flags |= SG_MITER_TO_SG;
++ else
++ flags |= SG_MITER_FROM_SG;
++
++ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
++ host->sg = data->sg;
++ host->part_buf_start = 0;
++ host->part_buf_count = 0;
++
++ mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR);
++ temp = mci_readl(host, INTMASK);
++ temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR;
++ mci_writel(host, INTMASK, temp);
++
++ temp = mci_readl(host, CTRL);
++ temp &= ~SDMMC_CTRL_DMA_ENABLE;
++ mci_writel(host, CTRL, temp);
++
++ /*
++ * Use the initial fifoth_val for PIO mode.
++ * If next issued data may be transfered by DMA mode,
++ * prev_blksz should be invalidated.
++ */
++ mci_writel(host, FIFOTH, host->fifoth_val);
++ host->prev_blksz = 0;
++ } else {
++ /*
++ * Keep the current block size.
++ * It will be used to decide whether to update
++ * fifoth register next time.
++ */
++ host->prev_blksz = data->blksz;
++ }
++}
++
++static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
++{
++ struct dw_mci *host = slot->host;
++ unsigned long timeout = jiffies + msecs_to_jiffies(500);
++ unsigned int cmd_status = 0;
++
++ mci_writel(host, CMDARG, arg);
++ wmb();
++ mci_writel(host, CMD, SDMMC_CMD_START | cmd);
++
++ while (time_before(jiffies, timeout)) {
++ cmd_status = mci_readl(host, CMD);
++ if (!(cmd_status & SDMMC_CMD_START))
++ return;
++ }
++ dev_err(&slot->mmc->class_dev,
++ "Timeout sending command (cmd %#x arg %#x status %#x)\n",
++ cmd, arg, cmd_status);
++}
++
++static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
++{
++ struct dw_mci *host = slot->host;
++ unsigned int clock = slot->clock;
++ u32 div;
++ u32 clk_en_a;
++ u32 sdmmc_cmd_bits = SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT;
++
++ /* We must continue to set bit 28 in CMD until the change is complete */
++ if (host->state == STATE_WAITING_CMD11_DONE)
++ sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH;
++
++ if (!clock) {
++ mci_writel(host, CLKENA, 0);
++ mci_send_cmd(slot, sdmmc_cmd_bits, 0);
++ } else if (clock != host->current_speed || force_clkinit) {
++ div = host->bus_hz / clock;
++ if (host->bus_hz % clock && host->bus_hz > clock)
++ /*
++ * move the + 1 after the divide to prevent
++ * over-clocking the card.
++ */
++ div += 1;
++
++ div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0;
++
++ if ((clock << div) != slot->__clk_old || force_clkinit)
++ dev_info(&slot->mmc->class_dev,
++ "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
++ slot->id, host->bus_hz, clock,
++ div ? ((host->bus_hz / div) >> 1) :
++ host->bus_hz, div);
++
++ /* disable clock */
++ mci_writel(host, CLKENA, 0);
++ mci_writel(host, CLKSRC, 0);
++
++ /* inform CIU */
++ mci_send_cmd(slot, sdmmc_cmd_bits, 0);
++
++ /* set clock to desired speed */
++ mci_writel(host, CLKDIV, div);
++
++ /* inform CIU */
++ mci_send_cmd(slot, sdmmc_cmd_bits, 0);
++
++ /* enable clock; only low power if no SDIO */
++ clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
++ if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
++ clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
++ mci_writel(host, CLKENA, clk_en_a);
++
++ /* inform CIU */
++ mci_send_cmd(slot, sdmmc_cmd_bits, 0);
++
++ /* keep the clock with reflecting clock dividor */
++ slot->__clk_old = clock << div;
++ }
++
++ host->current_speed = clock;
++
++ /* Set the current slot bus width */
++ mci_writel(host, CTYPE, (slot->ctype << slot->id));
++}
++
++static void __dw_mci_start_request(struct dw_mci *host,
++ struct dw_mci_slot *slot,
++ struct mmc_command *cmd)
++{
++ struct mmc_request *mrq;
++ struct mmc_data *data;
++ u32 cmdflags;
++
++ mrq = slot->mrq;
++
++ host->cur_slot = slot;
++ host->mrq = mrq;
++
++ host->pending_events = 0;
++ host->completed_events = 0;
++ host->cmd_status = 0;
++ host->data_status = 0;
++ host->dir_status = 0;
++
++ data = cmd->data;
++ if (data) {
++ mci_writel(host, TMOUT, 0xFFFFFFFF);
++ mci_writel(host, BYTCNT, data->blksz*data->blocks);
++ mci_writel(host, BLKSIZ, data->blksz);
++ }
++
++ cmdflags = dw_mci_prepare_command(slot->mmc, cmd);
++
++ /* this is the first command, send the initialization clock */
++ if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags))
++ cmdflags |= SDMMC_CMD_INIT;
++
++ if (data) {
++ dw_mci_submit_data(host, data);
++ wmb();
++ }
++
++ dw_mci_start_command(host, cmd, cmdflags);
++
++ if (mrq->stop)
++ host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
++ else
++ host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
++}
++
++static void dw_mci_start_request(struct dw_mci *host,
++ struct dw_mci_slot *slot)
++{
++ struct mmc_request *mrq = slot->mrq;
++ struct mmc_command *cmd;
++
++ cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
++ __dw_mci_start_request(host, slot, cmd);
++}
++
++/* must be called with host->lock held */
++static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
++ struct mmc_request *mrq)
++{
++ dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
++ host->state);
++
++ slot->mrq = mrq;
++
++ if (host->state == STATE_WAITING_CMD11_DONE) {
++ dev_warn(&slot->mmc->class_dev,
++ "Voltage change didn't complete\n");
++ /*
++ * this case isn't expected to happen, so we can
++ * either crash here or just try to continue on
++ * in the closest possible state
++ */
++ host->state = STATE_IDLE;
++ }
++
++ if (host->state == STATE_IDLE) {
++ host->state = STATE_SENDING_CMD;
++ dw_mci_start_request(host, slot);
++ } else {
++ list_add_tail(&slot->queue_node, &host->queue);
++ }
++}
++
++static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ struct dw_mci *host = slot->host;
++
++ WARN_ON(slot->mrq);
++
++ /*
++ * The check for card presence and queueing of the request must be
++ * atomic, otherwise the card could be removed in between and the
++ * request wouldn't fail until another card was inserted.
++ */
++ spin_lock_bh(&host->lock);
++
++ if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
++ spin_unlock_bh(&host->lock);
++ mrq->cmd->error = -ENOMEDIUM;
++ mmc_request_done(mmc, mrq);
++ return;
++ }
++
++ dw_mci_queue_request(host, slot, mrq);
++
++ spin_unlock_bh(&host->lock);
++}
++
++static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
++ u32 regs;
++ int ret;
++
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_4:
++ slot->ctype = SDMMC_CTYPE_4BIT;
++ break;
++ case MMC_BUS_WIDTH_8:
++ slot->ctype = SDMMC_CTYPE_8BIT;
++ break;
++ default:
++ /* set default 1 bit mode */
++ slot->ctype = SDMMC_CTYPE_1BIT;
++ }
++
++ regs = mci_readl(slot->host, UHS_REG);
++
++ /* DDR mode set */
++ if (ios->timing == MMC_TIMING_MMC_DDR52)
++ regs |= ((0x1 << slot->id) << 16);
++ else
++ regs &= ~((0x1 << slot->id) << 16);
++
++ mci_writel(slot->host, UHS_REG, regs);
++ slot->host->timing = ios->timing;
++
++ /*
++ * Use mirror of ios->clock to prevent race with mmc
++ * core ios update when finding the minimum.
++ */
++ slot->clock = ios->clock;
++
++ if (drv_data && drv_data->set_ios)
++ drv_data->set_ios(slot->host, ios);
++
++ /* Slot specific timing and width adjustment */
++ dw_mci_setup_bus(slot, false);
++
++ if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
++ slot->host->state = STATE_IDLE;
++
++ switch (ios->power_mode) {
++ case MMC_POWER_UP:
++ if (!IS_ERR(mmc->supply.vmmc)) {
++ ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
++ ios->vdd);
++ if (ret) {
++ dev_err(slot->host->dev,
++ "failed to enable vmmc regulator\n");
++ /*return, if failed turn on vmmc*/
++ return;
++ }
++ }
++ if (!IS_ERR(mmc->supply.vqmmc) && !slot->host->vqmmc_enabled) {
++ ret = regulator_enable(mmc->supply.vqmmc);
++ if (ret < 0)
++ dev_err(slot->host->dev,
++ "failed to enable vqmmc regulator\n");
++ else
++ slot->host->vqmmc_enabled = true;
++ }
++ set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
++ regs = mci_readl(slot->host, PWREN);
++ regs |= (1 << slot->id);
++ mci_writel(slot->host, PWREN, regs);
++ break;
++ case MMC_POWER_OFF:
++ if (!IS_ERR(mmc->supply.vmmc))
++ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
++
++ if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled) {
++ regulator_disable(mmc->supply.vqmmc);
++ slot->host->vqmmc_enabled = false;
++ }
++
++ regs = mci_readl(slot->host, PWREN);
++ regs &= ~(1 << slot->id);
++ mci_writel(slot->host, PWREN, regs);
++ break;
++ default:
++ break;
++ }
++}
++
++static int dw_mci_card_busy(struct mmc_host *mmc)
++{
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ u32 status;
++
++ /*
++ * Check the busy bit which is low when DAT[3:0]
++ * (the data lines) are 0000
++ */
++ status = mci_readl(slot->host, STATUS);
++
++ return !!(status & SDMMC_STATUS_BUSY);
++}
++
++static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
++{
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ struct dw_mci *host = slot->host;
++ u32 uhs;
++ u32 v18 = SDMMC_UHS_18V << slot->id;
++ int min_uv, max_uv;
++ int ret;
++
++ /*
++ * Program the voltage. Note that some instances of dw_mmc may use
++ * the UHS_REG for this. For other instances (like exynos) the UHS_REG
++ * does no harm but you need to set the regulator directly. Try both.
++ */
++ uhs = mci_readl(host, UHS_REG);
++ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
++ min_uv = 2700000;
++ max_uv = 3600000;
++ uhs &= ~v18;
++ } else {
++ min_uv = 1700000;
++ max_uv = 1950000;
++ uhs |= v18;
++ }
++ if (!IS_ERR(mmc->supply.vqmmc)) {
++ ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
++
++ if (ret) {
++ dev_err(&mmc->class_dev,
++ "Regulator set error %d: %d - %d\n",
++ ret, min_uv, max_uv);
++ return ret;
++ }
++ }
++ mci_writel(host, UHS_REG, uhs);
++
++ return 0;
++}
++
++static int dw_mci_get_ro(struct mmc_host *mmc)
++{
++ int read_only;
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ int gpio_ro = mmc_gpio_get_ro(mmc);
++
++ /* Use platform get_ro function, else try on board write protect */
++ if ((slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) ||
++ (slot->host->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT))
++ read_only = 0;
++ else if (!IS_ERR_VALUE(gpio_ro))
++ read_only = gpio_ro;
++ else
++ read_only =
++ mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
++
++ dev_dbg(&mmc->class_dev, "card is %s\n",
++ read_only ? "read-only" : "read-write");
++
++ return read_only;
++}
++
++static int dw_mci_get_cd(struct mmc_host *mmc)
++{
++ int present;
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ struct dw_mci_board *brd = slot->host->pdata;
++ struct dw_mci *host = slot->host;
++ int gpio_cd = mmc_gpio_get_cd(mmc);
++
++ /* Use platform get_cd function, else try onboard card detect */
++ if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
++ present = 1;
++ else if (!IS_ERR_VALUE(gpio_cd))
++ present = gpio_cd;
++ else
++ present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
++ == 0 ? 1 : 0;
++
++ spin_lock_bh(&host->lock);
++ if (present) {
++ set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
++ dev_dbg(&mmc->class_dev, "card is present\n");
++ } else {
++ clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
++ dev_dbg(&mmc->class_dev, "card is not present\n");
++ }
++ spin_unlock_bh(&host->lock);
++
++ return present;
++}
++
++/*
++ * Disable lower power mode.
++ *
++ * Low power mode will stop the card clock when idle. According to the
++ * description of the CLKENA register we should disable low power mode
++ * for SDIO cards if we need SDIO interrupts to work.
++ *
++ * This function is fast if low power mode is already disabled.
++ */
++static void dw_mci_disable_low_power(struct dw_mci_slot *slot)
++{
++ struct dw_mci *host = slot->host;
++ u32 clk_en_a;
++ const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
++
++ clk_en_a = mci_readl(host, CLKENA);
++
++ if (clk_en_a & clken_low_pwr) {
++ mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr);
++ mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
++ SDMMC_CMD_PRV_DAT_WAIT, 0);
++ }
++}
++
++static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
++{
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ struct dw_mci *host = slot->host;
++ u32 int_mask;
++
++ /* Enable/disable Slot Specific SDIO interrupt */
++ int_mask = mci_readl(host, INTMASK);
++ if (enb) {
++ /*
++ * Turn off low power mode if it was enabled. This is a bit of
++ * a heavy operation and we disable / enable IRQs a lot, so
++ * we'll leave low power mode disabled and it will get
++ * re-enabled again in dw_mci_setup_bus().
++ */
++ dw_mci_disable_low_power(slot);
++
++ mci_writel(host, INTMASK,
++ (int_mask | SDMMC_INT_SDIO(slot->id)));
++ } else {
++ mci_writel(host, INTMASK,
++ (int_mask & ~SDMMC_INT_SDIO(slot->id)));
++ }
++}
++
++static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
++{
++ struct dw_mci_slot *slot = mmc_priv(mmc);
++ struct dw_mci *host = slot->host;
++ const struct dw_mci_drv_data *drv_data = host->drv_data;
++ struct dw_mci_tuning_data tuning_data;
++ int err = -ENOSYS;
++
++ if (opcode == MMC_SEND_TUNING_BLOCK_HS200) {
++ if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
++ tuning_data.blk_pattern = tuning_blk_pattern_8bit;
++ tuning_data.blksz = sizeof(tuning_blk_pattern_8bit);
++ } else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
++ tuning_data.blk_pattern = tuning_blk_pattern_4bit;
++ tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
++ } else {
++ return -EINVAL;
++ }
++ } else if (opcode == MMC_SEND_TUNING_BLOCK) {
++ tuning_data.blk_pattern = tuning_blk_pattern_4bit;
++ tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
++ } else {
++ dev_err(host->dev,
++ "Undefined command(%d) for tuning\n", opcode);
++ return -EINVAL;
++ }
++
++ if (drv_data && drv_data->execute_tuning)
++ err = drv_data->execute_tuning(slot, opcode, &tuning_data);
++ return err;
++}
++
++static const struct mmc_host_ops dw_mci_ops = {
++ .request = dw_mci_request,
++ .pre_req = dw_mci_pre_req,
++ .post_req = dw_mci_post_req,
++ .set_ios = dw_mci_set_ios,
++ .get_ro = dw_mci_get_ro,
++ .get_cd = dw_mci_get_cd,
++ .enable_sdio_irq = dw_mci_enable_sdio_irq,
++ .execute_tuning = dw_mci_execute_tuning,
++ .card_busy = dw_mci_card_busy,
++ .start_signal_voltage_switch = dw_mci_switch_voltage,
++
++};
++
++static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
++ __releases(&host->lock)
++ __acquires(&host->lock)
++{
++ struct dw_mci_slot *slot;
++ struct mmc_host *prev_mmc = host->cur_slot->mmc;
++
++ WARN_ON(host->cmd || host->data);
++
++ host->cur_slot->mrq = NULL;
++ host->mrq = NULL;
++ if (!list_empty(&host->queue)) {
++ slot = list_entry(host->queue.next,
++ struct dw_mci_slot, queue_node);
++ list_del(&slot->queue_node);
++ dev_vdbg(host->dev, "list not empty: %s is next\n",
++ mmc_hostname(slot->mmc));
++ host->state = STATE_SENDING_CMD;
++ dw_mci_start_request(host, slot);
++ } else {
++ dev_vdbg(host->dev, "list empty\n");
++
++ if (host->state == STATE_SENDING_CMD11)
++ host->state = STATE_WAITING_CMD11_DONE;
++ else
++ host->state = STATE_IDLE;
++ }
++
++ spin_unlock(&host->lock);
++ mmc_request_done(prev_mmc, mrq);
++ spin_lock(&host->lock);
++}
++
++static int dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd)
++{
++ u32 status = host->cmd_status;
++
++ host->cmd_status = 0;
++
++ /* Read the response from the card (up to 16 bytes) */
++ if (cmd->flags & MMC_RSP_PRESENT) {
++ if (cmd->flags & MMC_RSP_136) {
++ cmd->resp[3] = mci_readl(host, RESP0);
++ cmd->resp[2] = mci_readl(host, RESP1);
++ cmd->resp[1] = mci_readl(host, RESP2);
++ cmd->resp[0] = mci_readl(host, RESP3);
++ } else {
++ cmd->resp[0] = mci_readl(host, RESP0);
++ cmd->resp[1] = 0;
++ cmd->resp[2] = 0;
++ cmd->resp[3] = 0;
++ }
++ }
++
++ if (status & SDMMC_INT_RTO)
++ cmd->error = -ETIMEDOUT;
++ else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC))
++ cmd->error = -EILSEQ;
++ else if (status & SDMMC_INT_RESP_ERR)
++ cmd->error = -EIO;
++ else
++ cmd->error = 0;
++
++ if (cmd->error) {
++ /* newer ip versions need a delay between retries */
++ if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY)
++ mdelay(20);
++ }
++
++ return cmd->error;
++}
++
++static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
++{
++ u32 status = host->data_status;
++
++ if (status & DW_MCI_DATA_ERROR_FLAGS) {
++ if (status & SDMMC_INT_DRTO) {
++ data->error = -ETIMEDOUT;
++ } else if (status & SDMMC_INT_DCRC) {
++ data->error = -EILSEQ;
++ } else if (status & SDMMC_INT_EBE) {
++ if (host->dir_status ==
++ DW_MCI_SEND_STATUS) {
++ /*
++ * No data CRC status was returned.
++ * The number of bytes transferred
++ * will be exaggerated in PIO mode.
++ */
++ data->bytes_xfered = 0;
++ data->error = -ETIMEDOUT;
++ } else if (host->dir_status ==
++ DW_MCI_RECV_STATUS) {
++ data->error = -EIO;
++ }
++ } else {
++ /* SDMMC_INT_SBE is included */
++ data->error = -EIO;
++ }
++
++ dev_dbg(host->dev, "data error, status 0x%08x\n", status);
++
++ /*
++ * After an error, there may be data lingering
++ * in the FIFO
++ */
++ dw_mci_reset(host);
++ } else {
++ data->bytes_xfered = data->blocks * data->blksz;
++ data->error = 0;
++ }
++
++ return data->error;
++}
++
++static void dw_mci_tasklet_func(unsigned long priv)
++{
++ struct dw_mci *host = (struct dw_mci *)priv;
++ struct mmc_data *data;
++ struct mmc_command *cmd;
++ struct mmc_request *mrq;
++ enum dw_mci_state state;
++ enum dw_mci_state prev_state;
++ unsigned int err;
++
++ spin_lock(&host->lock);
++
++ state = host->state;
++ data = host->data;
++ mrq = host->mrq;
++
++ do {
++ prev_state = state;
++
++ switch (state) {
++ case STATE_IDLE:
++ case STATE_WAITING_CMD11_DONE:
++ break;
++
++ case STATE_SENDING_CMD11:
++ case STATE_SENDING_CMD:
++ if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
++ &host->pending_events))
++ break;
++
++ cmd = host->cmd;
++ host->cmd = NULL;
++ set_bit(EVENT_CMD_COMPLETE, &host->completed_events);
++ err = dw_mci_command_complete(host, cmd);
++ if (cmd == mrq->sbc && !err) {
++ prev_state = state = STATE_SENDING_CMD;
++ __dw_mci_start_request(host, host->cur_slot,
++ mrq->cmd);
++ goto unlock;
++ }
++
++ if (cmd->data && err) {
++ dw_mci_stop_dma(host);
++ send_stop_abort(host, data);
++ state = STATE_SENDING_STOP;
++ break;
++ }
++
++ if (!cmd->data || err) {
++ dw_mci_request_end(host, mrq);
++ goto unlock;
++ }
++
++ prev_state = state = STATE_SENDING_DATA;
++ /* fall through */
++
++ case STATE_SENDING_DATA:
++ /*
++ * We could get a data error and never a transfer
++ * complete so we'd better check for it here.
++ *
++ * Note that we don't really care if we also got a
++ * transfer complete; stopping the DMA and sending an
++ * abort won't hurt.
++ */
++ if (test_and_clear_bit(EVENT_DATA_ERROR,
++ &host->pending_events)) {
++ dw_mci_stop_dma(host);
++ send_stop_abort(host, data);
++ state = STATE_DATA_ERROR;
++ break;
++ }
++
++ if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
++ &host->pending_events))
++ break;
++
++ set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
++
++ /*
++ * Handle an EVENT_DATA_ERROR that might have shown up
++ * before the transfer completed. This might not have
++ * been caught by the check above because the interrupt
++ * could have gone off between the previous check and
++ * the check for transfer complete.
++ *
++ * Technically this ought not be needed assuming we
++ * get a DATA_COMPLETE eventually (we'll notice the
++ * error and end the request), but it shouldn't hurt.
++ *
++ * This has the advantage of sending the stop command.
++ */
++ if (test_and_clear_bit(EVENT_DATA_ERROR,
++ &host->pending_events)) {
++ dw_mci_stop_dma(host);
++ send_stop_abort(host, data);
++ state = STATE_DATA_ERROR;
++ break;
++ }
++ prev_state = state = STATE_DATA_BUSY;
++
++ /* fall through */
++
++ case STATE_DATA_BUSY:
++ if (!test_and_clear_bit(EVENT_DATA_COMPLETE,
++ &host->pending_events))
++ break;
++
++ host->data = NULL;
++ set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
++ err = dw_mci_data_complete(host, data);
++
++ if (!err) {
++ if (!data->stop || mrq->sbc) {
++ if (mrq->sbc && data->stop)
++ data->stop->error = 0;
++ dw_mci_request_end(host, mrq);
++ goto unlock;
++ }
++
++ /* stop command for open-ended transfer*/
++ if (data->stop)
++ send_stop_abort(host, data);
++ } else {
++ /*
++ * If we don't have a command complete now we'll
++ * never get one since we just reset everything;
++ * better end the request.
++ *
++ * If we do have a command complete we'll fall
++ * through to the SENDING_STOP command and
++ * everything will be peachy keen.
++ */
++ if (!test_bit(EVENT_CMD_COMPLETE,
++ &host->pending_events)) {
++ host->cmd = NULL;
++ dw_mci_request_end(host, mrq);
++ goto unlock;
++ }
++ }
++
++ /*
++ * If err has non-zero,
++ * stop-abort command has been already issued.
++ */
++ prev_state = state = STATE_SENDING_STOP;
++
++ /* fall through */
++
++ case STATE_SENDING_STOP:
++ if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
++ &host->pending_events))
++ break;
++
++ /* CMD error in data command */
++ if (mrq->cmd->error && mrq->data)
++ dw_mci_reset(host);
++
++ host->cmd = NULL;
++ host->data = NULL;
++
++ if (mrq->stop)
++ dw_mci_command_complete(host, mrq->stop);
++ else
++ host->cmd_status = 0;
++
++ dw_mci_request_end(host, mrq);
++ goto unlock;
++
++ case STATE_DATA_ERROR:
++ if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
++ &host->pending_events))
++ break;
++
++ state = STATE_DATA_BUSY;
++ break;
++ }
++ } while (state != prev_state);
++
++ host->state = state;
++unlock:
++ spin_unlock(&host->lock);
++
++}
++
++/* push final bytes to part_buf, only use during push */
++static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt)
++{
++ memcpy((void *)&host->part_buf, buf, cnt);
++ host->part_buf_count = cnt;
++}
++
++/* append bytes to part_buf, only use during push */
++static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt)
++{
++ cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count);
++ memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt);
++ host->part_buf_count += cnt;
++ return cnt;
++}
++
++/* pull first bytes from part_buf, only use during pull */
++static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt)
++{
++ cnt = min(cnt, (int)host->part_buf_count);
++ if (cnt) {
++ memcpy(buf, (void *)&host->part_buf + host->part_buf_start,
++ cnt);
++ host->part_buf_count -= cnt;
++ host->part_buf_start += cnt;
++ }
++ return cnt;
++}
++
++/* pull final bytes from the part_buf, assuming it's just been filled */
++static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt)
++{
++ memcpy(buf, &host->part_buf, cnt);
++ host->part_buf_start = cnt;
++ host->part_buf_count = (1 << host->data_shift) - cnt;
++}
++
++static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
++{
++ struct mmc_data *data = host->data;
++ int init_cnt = cnt;
++
++ /* try and push anything in the part_buf */
++ if (unlikely(host->part_buf_count)) {
++ int len = dw_mci_push_part_bytes(host, buf, cnt);
++ buf += len;
++ cnt -= len;
++ if (host->part_buf_count == 2) {
++ mci_writew(host, DATA(host->data_offset),
++ host->part_buf16);
++ host->part_buf_count = 0;
++ }
++ }
++#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (unlikely((unsigned long)buf & 0x1)) {
++ while (cnt >= 2) {
++ u16 aligned_buf[64];
++ int len = min(cnt & -2, (int)sizeof(aligned_buf));
++ int items = len >> 1;
++ int i;
++ /* memcpy from input buffer into aligned buffer */
++ memcpy(aligned_buf, buf, len);
++ buf += len;
++ cnt -= len;
++ /* push data from aligned buffer into fifo */
++ for (i = 0; i < items; ++i)
++ mci_writew(host, DATA(host->data_offset),
++ aligned_buf[i]);
++ }
++ } else
++#endif
++ {
++ u16 *pdata = buf;
++ for (; cnt >= 2; cnt -= 2)
++ mci_writew(host, DATA(host->data_offset), *pdata++);
++ buf = pdata;
++ }
++ /* put anything remaining in the part_buf */
++ if (cnt) {
++ dw_mci_set_part_bytes(host, buf, cnt);
++ /* Push data if we have reached the expected data length */
++ if ((data->bytes_xfered + init_cnt) ==
++ (data->blksz * data->blocks))
++ mci_writew(host, DATA(host->data_offset),
++ host->part_buf16);
++ }
++}
++
++static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
++{
++#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (unlikely((unsigned long)buf & 0x1)) {
++ while (cnt >= 2) {
++ /* pull data from fifo into aligned buffer */
++ u16 aligned_buf[64];
++ int len = min(cnt & -2, (int)sizeof(aligned_buf));
++ int items = len >> 1;
++ int i;
++ for (i = 0; i < items; ++i)
++ aligned_buf[i] = mci_readw(host,
++ DATA(host->data_offset));
++ /* memcpy from aligned buffer into output buffer */
++ memcpy(buf, aligned_buf, len);
++ buf += len;
++ cnt -= len;
++ }
++ } else
++#endif
++ {
++ u16 *pdata = buf;
++ for (; cnt >= 2; cnt -= 2)
++ *pdata++ = mci_readw(host, DATA(host->data_offset));
++ buf = pdata;
++ }
++ if (cnt) {
++ host->part_buf16 = mci_readw(host, DATA(host->data_offset));
++ dw_mci_pull_final_bytes(host, buf, cnt);
++ }
++}
++
++static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
++{
++ struct mmc_data *data = host->data;
++ int init_cnt = cnt;
++
++ /* try and push anything in the part_buf */
++ if (unlikely(host->part_buf_count)) {
++ int len = dw_mci_push_part_bytes(host, buf, cnt);
++ buf += len;
++ cnt -= len;
++ if (host->part_buf_count == 4) {
++ mci_writel(host, DATA(host->data_offset),
++ host->part_buf32);
++ host->part_buf_count = 0;
++ }
++ }
++#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (unlikely((unsigned long)buf & 0x3)) {
++ while (cnt >= 4) {
++ u32 aligned_buf[32];
++ int len = min(cnt & -4, (int)sizeof(aligned_buf));
++ int items = len >> 2;
++ int i;
++ /* memcpy from input buffer into aligned buffer */
++ memcpy(aligned_buf, buf, len);
++ buf += len;
++ cnt -= len;
++ /* push data from aligned buffer into fifo */
++ for (i = 0; i < items; ++i)
++ mci_writel(host, DATA(host->data_offset),
++ aligned_buf[i]);
++ }
++ } else
++#endif
++ {
++ u32 *pdata = buf;
++ for (; cnt >= 4; cnt -= 4)
++ mci_writel(host, DATA(host->data_offset), *pdata++);
++ buf = pdata;
++ }
++ /* put anything remaining in the part_buf */
++ if (cnt) {
++ dw_mci_set_part_bytes(host, buf, cnt);
++ /* Push data if we have reached the expected data length */
++ if ((data->bytes_xfered + init_cnt) ==
++ (data->blksz * data->blocks))
++ mci_writel(host, DATA(host->data_offset),
++ host->part_buf32);
++ }
++}
++
++static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
++{
++#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (unlikely((unsigned long)buf & 0x3)) {
++ while (cnt >= 4) {
++ /* pull data from fifo into aligned buffer */
++ u32 aligned_buf[32];
++ int len = min(cnt & -4, (int)sizeof(aligned_buf));
++ int items = len >> 2;
++ int i;
++ for (i = 0; i < items; ++i)
++ aligned_buf[i] = mci_readl(host,
++ DATA(host->data_offset));
++ /* memcpy from aligned buffer into output buffer */
++ memcpy(buf, aligned_buf, len);
++ buf += len;
++ cnt -= len;
++ }
++ } else
++#endif
++ {
++ u32 *pdata = buf;
++ for (; cnt >= 4; cnt -= 4)
++ *pdata++ = mci_readl(host, DATA(host->data_offset));
++ buf = pdata;
++ }
++ if (cnt) {
++ host->part_buf32 = mci_readl(host, DATA(host->data_offset));
++ dw_mci_pull_final_bytes(host, buf, cnt);
++ }
++}
++
++static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
++{
++ struct mmc_data *data = host->data;
++ int init_cnt = cnt;
++
++ /* try and push anything in the part_buf */
++ if (unlikely(host->part_buf_count)) {
++ int len = dw_mci_push_part_bytes(host, buf, cnt);
++ buf += len;
++ cnt -= len;
++
++ if (host->part_buf_count == 8) {
++ mci_writeq(host, DATA(host->data_offset),
++ host->part_buf);
++ host->part_buf_count = 0;
++ }
++ }
++#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (unlikely((unsigned long)buf & 0x7)) {
++ while (cnt >= 8) {
++ u64 aligned_buf[16];
++ int len = min(cnt & -8, (int)sizeof(aligned_buf));
++ int items = len >> 3;
++ int i;
++ /* memcpy from input buffer into aligned buffer */
++ memcpy(aligned_buf, buf, len);
++ buf += len;
++ cnt -= len;
++ /* push data from aligned buffer into fifo */
++ for (i = 0; i < items; ++i)
++ mci_writeq(host, DATA(host->data_offset),
++ aligned_buf[i]);
++ }
++ } else
++#endif
++ {
++ u64 *pdata = buf;
++ for (; cnt >= 8; cnt -= 8)
++ mci_writeq(host, DATA(host->data_offset), *pdata++);
++ buf = pdata;
++ }
++ /* put anything remaining in the part_buf */
++ if (cnt) {
++ dw_mci_set_part_bytes(host, buf, cnt);
++ /* Push data if we have reached the expected data length */
++ if ((data->bytes_xfered + init_cnt) ==
++ (data->blksz * data->blocks))
++ mci_writeq(host, DATA(host->data_offset),
++ host->part_buf);
++ }
++}
++
++static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
++{
++#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
++ if (unlikely((unsigned long)buf & 0x7)) {
++ while (cnt >= 8) {
++ /* pull data from fifo into aligned buffer */
++ u64 aligned_buf[16];
++ int len = min(cnt & -8, (int)sizeof(aligned_buf));
++ int items = len >> 3;
++ int i;
++ for (i = 0; i < items; ++i)
++ aligned_buf[i] = mci_readq(host,
++ DATA(host->data_offset));
++ /* memcpy from aligned buffer into output buffer */
++ memcpy(buf, aligned_buf, len);
++ buf += len;
++ cnt -= len;
++ }
++ } else
++#endif
++ {
++ u64 *pdata = buf;
++ for (; cnt >= 8; cnt -= 8)
++ *pdata++ = mci_readq(host, DATA(host->data_offset));
++ buf = pdata;
++ }
++ if (cnt) {
++ host->part_buf = mci_readq(host, DATA(host->data_offset));
++ dw_mci_pull_final_bytes(host, buf, cnt);
++ }
++}
++
++static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
++{
++ int len;
++
++ /* get remaining partial bytes */
++ len = dw_mci_pull_part_bytes(host, buf, cnt);
++ if (unlikely(len == cnt))
++ return;
++ buf += len;
++ cnt -= len;
++
++ /* get the rest of the data */
++ host->pull_data(host, buf, cnt);
++}
++
++static void dw_mci_read_data_pio(struct dw_mci *host, bool dto)
++{
++ struct sg_mapping_iter *sg_miter = &host->sg_miter;
++ void *buf;
++ unsigned int offset;
++ struct mmc_data *data = host->data;
++ int shift = host->data_shift;
++ u32 status;
++ unsigned int len;
++ unsigned int remain, fcnt;
++
++ do {
++ if (!sg_miter_next(sg_miter))
++ goto done;
++
++ host->sg = sg_miter->piter.sg;
++ buf = sg_miter->addr;
++ remain = sg_miter->length;
++ offset = 0;
++
++ do {
++ fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
++ << shift) + host->part_buf_count;
++ len = min(remain, fcnt);
++ if (!len)
++ break;
++ dw_mci_pull_data(host, (void *)(buf + offset), len);
++ data->bytes_xfered += len;
++ offset += len;
++ remain -= len;
++ } while (remain);
++
++ sg_miter->consumed = offset;
++ status = mci_readl(host, MINTSTS);
++ mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
++ /* if the RXDR is ready read again */
++ } while ((status & SDMMC_INT_RXDR) ||
++ (dto && SDMMC_GET_FCNT(mci_readl(host, STATUS))));
++
++ if (!remain) {
++ if (!sg_miter_next(sg_miter))
++ goto done;
++ sg_miter->consumed = 0;
++ }
++ sg_miter_stop(sg_miter);
++ return;
++
++done:
++ sg_miter_stop(sg_miter);
++ host->sg = NULL;
++ smp_wmb();
++ set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
++}
++
++static void dw_mci_write_data_pio(struct dw_mci *host)
++{
++ struct sg_mapping_iter *sg_miter = &host->sg_miter;
++ void *buf;
++ unsigned int offset;
++ struct mmc_data *data = host->data;
++ int shift = host->data_shift;
++ u32 status;
++ unsigned int len;
++ unsigned int fifo_depth = host->fifo_depth;
++ unsigned int remain, fcnt;
++
++ do {
++ if (!sg_miter_next(sg_miter))
++ goto done;
++
++ host->sg = sg_miter->piter.sg;
++ buf = sg_miter->addr;
++ remain = sg_miter->length;
++ offset = 0;
++
++ do {
++ fcnt = ((fifo_depth -
++ SDMMC_GET_FCNT(mci_readl(host, STATUS)))
++ << shift) - host->part_buf_count;
++ len = min(remain, fcnt);
++ if (!len)
++ break;
++ host->push_data(host, (void *)(buf + offset), len);
++ data->bytes_xfered += len;
++ offset += len;
++ remain -= len;
++ } while (remain);
++
++ sg_miter->consumed = offset;
++ status = mci_readl(host, MINTSTS);
++ mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
++ } while (status & SDMMC_INT_TXDR); /* if TXDR write again */
++
++ if (!remain) {
++ if (!sg_miter_next(sg_miter))
++ goto done;
++ sg_miter->consumed = 0;
++ }
++ sg_miter_stop(sg_miter);
++ return;
++
++done:
++ sg_miter_stop(sg_miter);
++ host->sg = NULL;
++ smp_wmb();
++ set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
++}
++
++static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
++{
++ if (!host->cmd_status)
++ host->cmd_status = status;
++
++ smp_wmb();
++
++ set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
++ tasklet_schedule(&host->tasklet);
++}
++
++static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
++{
++ struct dw_mci *host = dev_id;
++ u32 pending;
++ int i;
++
++ pending = mci_readl(host, MINTSTS); /* read-only mask reg */
++
++ /*
++ * DTO fix - version 2.10a and below, and only if internal DMA
++ * is configured.
++ */
++ if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
++ if (!pending &&
++ ((mci_readl(host, STATUS) >> 17) & 0x1fff))
++ pending |= SDMMC_INT_DATA_OVER;
++ }
++
++ if (pending) {
++ /* Check volt switch first, since it can look like an error */
++ if ((host->state == STATE_SENDING_CMD11) &&
++ (pending & SDMMC_INT_VOLT_SWITCH)) {
++ mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
++ pending &= ~SDMMC_INT_VOLT_SWITCH;
++ dw_mci_cmd_interrupt(host, pending);
++ }
++
++ if (pending & DW_MCI_CMD_ERROR_FLAGS) {
++ mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
++ host->cmd_status = pending;
++ smp_wmb();
++ set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
++ }
++
++ if (pending & DW_MCI_DATA_ERROR_FLAGS) {
++ /* if there is an error report DATA_ERROR */
++ mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
++ host->data_status = pending;
++ smp_wmb();
++ set_bit(EVENT_DATA_ERROR, &host->pending_events);
++ tasklet_schedule(&host->tasklet);
++ }
++
++ if (pending & SDMMC_INT_DATA_OVER) {
++ mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
++ if (!host->data_status)
++ host->data_status = pending;
++ smp_wmb();
++ if (host->dir_status == DW_MCI_RECV_STATUS) {
++ if (host->sg != NULL)
++ dw_mci_read_data_pio(host, true);
++ }
++ set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
++ tasklet_schedule(&host->tasklet);
++ }
++
++ if (pending & SDMMC_INT_RXDR) {
++ mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
++ if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
++ dw_mci_read_data_pio(host, false);
++ }
++
++ if (pending & SDMMC_INT_TXDR) {
++ mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
++ if (host->dir_status == DW_MCI_SEND_STATUS && host->sg)
++ dw_mci_write_data_pio(host);
++ }
++
++ if (pending & SDMMC_INT_CMD_DONE) {
++ mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
++ dw_mci_cmd_interrupt(host, pending);
++ }
++
++ if (pending & SDMMC_INT_CD) {
++ mci_writel(host, RINTSTS, SDMMC_INT_CD);
++ queue_work(host->card_workqueue, &host->card_work);
++ }
++
++ /* Handle SDIO Interrupts */
++ for (i = 0; i < host->num_slots; i++) {
++ struct dw_mci_slot *slot = host->slot[i];
++ if (pending & SDMMC_INT_SDIO(i)) {
++ mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
++ mmc_signal_sdio_irq(slot->mmc);
++ }
++ }
++
++ }
++
++#ifdef CONFIG_MMC_DW_IDMAC
++ /* Handle DMA interrupts */
++ pending = mci_readl(host, IDSTS);
++ if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
++ mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
++ mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
++ host->dma_ops->complete(host);
++ }
++#endif
++
++ return IRQ_HANDLED;
++}
++
++static void dw_mci_work_routine_card(struct work_struct *work)
++{
++ struct dw_mci *host = container_of(work, struct dw_mci, card_work);
++ int i;
++
++ for (i = 0; i < host->num_slots; i++) {
++ struct dw_mci_slot *slot = host->slot[i];
++ struct mmc_host *mmc = slot->mmc;
++ struct mmc_request *mrq;
++ int present;
++
++ present = dw_mci_get_cd(mmc);
++ while (present != slot->last_detect_state) {
++ dev_dbg(&slot->mmc->class_dev, "card %s\n",
++ present ? "inserted" : "removed");
++
++ spin_lock_bh(&host->lock);
++
++ /* Card change detected */
++ slot->last_detect_state = present;
++
++ /* Clean up queue if present */
++ mrq = slot->mrq;
++ if (mrq) {
++ if (mrq == host->mrq) {
++ host->data = NULL;
++ host->cmd = NULL;
++
++ switch (host->state) {
++ case STATE_IDLE:
++ case STATE_WAITING_CMD11_DONE:
++ break;
++ case STATE_SENDING_CMD11:
++ case STATE_SENDING_CMD:
++ mrq->cmd->error = -ENOMEDIUM;
++ if (!mrq->data)
++ break;
++ /* fall through */
++ case STATE_SENDING_DATA:
++ mrq->data->error = -ENOMEDIUM;
++ dw_mci_stop_dma(host);
++ break;
++ case STATE_DATA_BUSY:
++ case STATE_DATA_ERROR:
++ if (mrq->data->error == -EINPROGRESS)
++ mrq->data->error = -ENOMEDIUM;
++ /* fall through */
++ case STATE_SENDING_STOP:
++ if (mrq->stop)
++ mrq->stop->error = -ENOMEDIUM;
++ break;
++ }
++
++ dw_mci_request_end(host, mrq);
++ } else {
++ list_del(&slot->queue_node);
++ mrq->cmd->error = -ENOMEDIUM;
++ if (mrq->data)
++ mrq->data->error = -ENOMEDIUM;
++ if (mrq->stop)
++ mrq->stop->error = -ENOMEDIUM;
++
++ spin_unlock(&host->lock);
++ mmc_request_done(slot->mmc, mrq);
++ spin_lock(&host->lock);
++ }
++ }
++
++ /* Power down slot */
++ if (present == 0)
++ dw_mci_reset(host);
++
++ spin_unlock_bh(&host->lock);
++
++ present = dw_mci_get_cd(mmc);
++ }
++
++ mmc_detect_change(slot->mmc,
++ msecs_to_jiffies(host->pdata->detect_delay_ms));
++ }
++}
++
++#ifdef CONFIG_OF
++/* given a slot id, find out the device node representing that slot */
++static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
++{
++ struct device_node *np;
++ const __be32 *addr;
++ int len;
++
++ if (!dev || !dev->of_node)
++ return NULL;
++
++ for_each_child_of_node(dev->of_node, np) {
++ addr = of_get_property(np, "reg", &len);
++ if (!addr || (len < sizeof(int)))
++ continue;
++ if (be32_to_cpup(addr) == slot)
++ return np;
++ }
++ return NULL;
++}
++
++static struct dw_mci_of_slot_quirks {
++ char *quirk;
++ int id;
++} of_slot_quirks[] = {
++ {
++ .quirk = "disable-wp",
++ .id = DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT,
++ },
++};
++
++static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
++{
++ struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
++ int quirks = 0;
++ int idx;
++
++ /* get quirks */
++ for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++)
++ if (of_get_property(np, of_slot_quirks[idx].quirk, NULL)) {
++ dev_warn(dev, "Slot quirk %s is deprecated\n",
++ of_slot_quirks[idx].quirk);
++ quirks |= of_slot_quirks[idx].id;
++ }
++
++ return quirks;
++}
++#else /* CONFIG_OF */
++static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
++{
++ return 0;
++}
++#endif /* CONFIG_OF */
++
++static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
++{
++ struct mmc_host *mmc;
++ struct dw_mci_slot *slot;
++ const struct dw_mci_drv_data *drv_data = host->drv_data;
++ int ctrl_id, ret;
++ u32 freq[2];
++
++ mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
++ if (!mmc)
++ return -ENOMEM;
++
++ slot = mmc_priv(mmc);
++ slot->id = id;
++ slot->mmc = mmc;
++ slot->host = host;
++ host->slot[id] = slot;
++
++ slot->quirks = dw_mci_of_get_slot_quirks(host->dev, slot->id);
++
++ mmc->ops = &dw_mci_ops;
++ if (of_property_read_u32_array(host->dev->of_node,
++ "clock-freq-min-max", freq, 2)) {
++ mmc->f_min = DW_MCI_FREQ_MIN;
++ mmc->f_max = DW_MCI_FREQ_MAX;
++ } else {
++ mmc->f_min = freq[0];
++ mmc->f_max = freq[1];
++ }
++
++ /*if there are external regulators, get them*/
++ ret = mmc_regulator_get_supply(mmc);
++ if (ret == -EPROBE_DEFER)
++ goto err_host_allocated;
++
++ if (!mmc->ocr_avail)
++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
++
++ if (host->pdata->caps)
++ mmc->caps = host->pdata->caps;
++
++ if (host->pdata->pm_caps)
++ mmc->pm_caps = host->pdata->pm_caps;
++
++ if (host->dev->of_node) {
++ ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
++ if (ctrl_id < 0)
++ ctrl_id = 0;
++ } else {
++ ctrl_id = to_platform_device(host->dev)->id;
++ }
++ if (drv_data && drv_data->caps)
++ mmc->caps |= drv_data->caps[ctrl_id];
++
++ if (host->pdata->caps2)
++ mmc->caps2 = host->pdata->caps2;
++
++ ret = mmc_of_parse(mmc);
++ if (ret)
++ goto err_host_allocated;
++
++ if (host->pdata->blk_settings) {
++ mmc->max_segs = host->pdata->blk_settings->max_segs;
++ mmc->max_blk_size = host->pdata->blk_settings->max_blk_size;
++ mmc->max_blk_count = host->pdata->blk_settings->max_blk_count;
++ mmc->max_req_size = host->pdata->blk_settings->max_req_size;
++ mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
++ } else {
++ /* Useful defaults if platform data is unset. */
++#ifdef CONFIG_MMC_DW_IDMAC
++ mmc->max_segs = host->ring_size;
++ mmc->max_blk_size = 65536;
++ mmc->max_blk_count = host->ring_size;
++ mmc->max_seg_size = 0x1000;
++ mmc->max_req_size = mmc->max_seg_size * mmc->max_blk_count;
++#else
++ mmc->max_segs = 64;
++ mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
++ mmc->max_blk_count = 512;
++ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
++ mmc->max_seg_size = mmc->max_req_size;
++#endif /* CONFIG_MMC_DW_IDMAC */
++ }
++
++ if (dw_mci_get_cd(mmc))
++ set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
++ else
++ clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
++
++ ret = mmc_add_host(mmc);
++ if (ret)
++ goto err_host_allocated;
++
++#if defined(CONFIG_DEBUG_FS)
++ dw_mci_init_debugfs(slot);
++#endif
++
++ /* Card initially undetected */
++ slot->last_detect_state = 0;
++
++ return 0;
++
++err_host_allocated:
++ mmc_free_host(mmc);
++ return ret;
++}
++
++static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
++{
++ /* Debugfs stuff is cleaned up by mmc core */
++ mmc_remove_host(slot->mmc);
++ slot->host->slot[id] = NULL;
++ mmc_free_host(slot->mmc);
++}
++
++static void dw_mci_init_dma(struct dw_mci *host)
++{
++ /* Alloc memory for sg translation */
++ host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
++ &host->sg_dma, GFP_KERNEL);
++ if (!host->sg_cpu) {
++ dev_err(host->dev, "%s: could not alloc DMA memory\n",
++ __func__);
++ goto no_dma;
++ }
++
++ /* Determine which DMA interface to use */
++#ifdef CONFIG_MMC_DW_IDMAC
++ host->dma_ops = &dw_mci_idmac_ops;
++ dev_info(host->dev, "Using internal DMA controller.\n");
++#endif
++
++ if (!host->dma_ops)
++ goto no_dma;
++
++ if (host->dma_ops->init && host->dma_ops->start &&
++ host->dma_ops->stop && host->dma_ops->cleanup) {
++ if (host->dma_ops->init(host)) {
++ dev_err(host->dev, "%s: Unable to initialize "
++ "DMA Controller.\n", __func__);
++ goto no_dma;
++ }
++ } else {
++ dev_err(host->dev, "DMA initialization not found.\n");
++ goto no_dma;
++ }
++
++ host->use_dma = 1;
++ return;
++
++no_dma:
++ dev_info(host->dev, "Using PIO mode.\n");
++ host->use_dma = 0;
++ return;
++}
++
++static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
++{
++ unsigned long timeout = jiffies + msecs_to_jiffies(500);
++ u32 ctrl;
++
++ ctrl = mci_readl(host, CTRL);
++ ctrl |= reset;
++ mci_writel(host, CTRL, ctrl);
++
++ /* wait till resets clear */
++ do {
++ ctrl = mci_readl(host, CTRL);
++ if (!(ctrl & reset))
++ return true;
++ } while (time_before(jiffies, timeout));
++
++ dev_err(host->dev,
++ "Timeout resetting block (ctrl reset %#x)\n",
++ ctrl & reset);
++
++ return false;
++}
++
++static bool dw_mci_reset(struct dw_mci *host)
++{
++ u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
++ bool ret = false;
++
++ /*
++ * Reseting generates a block interrupt, hence setting
++ * the scatter-gather pointer to NULL.
++ */
++ if (host->sg) {
++ sg_miter_stop(&host->sg_miter);
++ host->sg = NULL;
++ }
++
++ if (host->use_dma)
++ flags |= SDMMC_CTRL_DMA_RESET;
++
++ if (dw_mci_ctrl_reset(host, flags)) {
++ /*
++ * In all cases we clear the RAWINTS register to clear any
++ * interrupts.
++ */
++ mci_writel(host, RINTSTS, 0xFFFFFFFF);
++
++ /* if using dma we wait for dma_req to clear */
++ if (host->use_dma) {
++ unsigned long timeout = jiffies + msecs_to_jiffies(500);
++ u32 status;
++ do {
++ status = mci_readl(host, STATUS);
++ if (!(status & SDMMC_STATUS_DMA_REQ))
++ break;
++ cpu_relax();
++ } while (time_before(jiffies, timeout));
++
++ if (status & SDMMC_STATUS_DMA_REQ) {
++ dev_err(host->dev,
++ "%s: Timeout waiting for dma_req to "
++ "clear during reset\n", __func__);
++ goto ciu_out;
++ }
++
++ /* when using DMA next we reset the fifo again */
++ if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET))
++ goto ciu_out;
++ }
++ } else {
++ /* if the controller reset bit did clear, then set clock regs */
++ if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) {
++ dev_err(host->dev, "%s: fifo/dma reset bits didn't "
++ "clear but ciu was reset, doing clock update\n",
++ __func__);
++ goto ciu_out;
++ }
++ }
++
++#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
++ /* It is also recommended that we reset and reprogram idmac */
++ dw_mci_idmac_reset(host);
++#endif
++
++ ret = true;
++
++ciu_out:
++ /* After a CTRL reset we need to have CIU set clock registers */
++ mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
++
++ return ret;
++}
++
++#ifdef CONFIG_OF
++static struct dw_mci_of_quirks {
++ char *quirk;
++ int id;
++} of_quirks[] = {
++ {
++ .quirk = "broken-cd",
++ .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
++ }, {
++ .quirk = "disable-wp",
++ .id = DW_MCI_QUIRK_NO_WRITE_PROTECT,
++ },
++};
++
++static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
++{
++ struct dw_mci_board *pdata;
++ struct device *dev = host->dev;
++ struct device_node *np = dev->of_node;
++ const struct dw_mci_drv_data *drv_data = host->drv_data;
++ int idx, ret;
++ u32 clock_frequency;
++
++ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
++ if (!pdata) {
++ dev_err(dev, "could not allocate memory for pdata\n");
++ return ERR_PTR(-ENOMEM);
++ }
++
++ /* find out number of slots supported */
++ if (of_property_read_u32(dev->of_node, "num-slots",
++ &pdata->num_slots)) {
++ dev_info(dev, "num-slots property not found, "
++ "assuming 1 slot is available\n");
++ pdata->num_slots = 1;
++ }
++
++ /* get quirks */
++ for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++)
++ if (of_get_property(np, of_quirks[idx].quirk, NULL))
++ pdata->quirks |= of_quirks[idx].id;
++
++ if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
++ dev_info(dev, "fifo-depth property not found, using "
++ "value of FIFOTH register as default\n");
++
++ of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
++
++ if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
++ pdata->bus_hz = clock_frequency;
++
++ if (drv_data && drv_data->parse_dt) {
++ ret = drv_data->parse_dt(host);
++ if (ret)
++ return ERR_PTR(ret);
++ }
++
++ if (of_find_property(np, "supports-highspeed", NULL))
++ pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
++
++ return pdata;
++}
++
++#else /* CONFIG_OF */
++static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
++{
++ return ERR_PTR(-EINVAL);
++}
++#endif /* CONFIG_OF */
++
++int dw_mci_probe(struct dw_mci *host)
++{
++ const struct dw_mci_drv_data *drv_data = host->drv_data;
++ int width, i, ret = 0;
++ u32 fifo_size;
++ int init_slots = 0;
++
++ if (!host->pdata) {
++ host->pdata = dw_mci_parse_dt(host);
++ if (IS_ERR(host->pdata)) {
++ dev_err(host->dev, "platform data not available\n");
++ return -EINVAL;
++ }
++ }
++
++ if (host->pdata->num_slots > 1) {
++ dev_err(host->dev,
++ "Platform data must supply num_slots.\n");
++ return -ENODEV;
++ }
++
++ host->biu_clk = devm_clk_get(host->dev, "biu");
++ if (IS_ERR(host->biu_clk)) {
++ dev_dbg(host->dev, "biu clock not available\n");
++ } else {
++ ret = clk_prepare_enable(host->biu_clk);
++ if (ret) {
++ dev_err(host->dev, "failed to enable biu clock\n");
++ return ret;
++ }
++ }
++
++ host->ciu_clk = devm_clk_get(host->dev, "ciu");
++ if (IS_ERR(host->ciu_clk)) {
++ dev_dbg(host->dev, "ciu clock not available\n");
++ host->bus_hz = host->pdata->bus_hz;
++ } else {
++ ret = clk_prepare_enable(host->ciu_clk);
++ if (ret) {
++ dev_err(host->dev, "failed to enable ciu clock\n");
++ goto err_clk_biu;
++ }
++
++ if (host->pdata->bus_hz) {
++ ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz);
++ if (ret)
++ dev_warn(host->dev,
++ "Unable to set bus rate to %uHz\n",
++ host->pdata->bus_hz);
++ }
++ host->bus_hz = clk_get_rate(host->ciu_clk);
++ }
++
++ if (!host->bus_hz) {
++ dev_err(host->dev,
++ "Platform data must supply bus speed\n");
++ ret = -ENODEV;
++ goto err_clk_ciu;
++ }
++
++ if (drv_data && drv_data->init) {
++ ret = drv_data->init(host);
++ if (ret) {
++ dev_err(host->dev,
++ "implementation specific init failed\n");
++ goto err_clk_ciu;
++ }
++ }
++
++ if (drv_data && drv_data->setup_clock) {
++ ret = drv_data->setup_clock(host);
++ if (ret) {
++ dev_err(host->dev,
++ "implementation specific clock setup failed\n");
++ goto err_clk_ciu;
++ }
++ }
++
++ host->quirks = host->pdata->quirks;
++
++ spin_lock_init(&host->lock);
++ INIT_LIST_HEAD(&host->queue);
++
++ /*
++ * Get the host data width - this assumes that HCON has been set with
++ * the correct values.
++ */
++ i = (mci_readl(host, HCON) >> 7) & 0x7;
++ if (!i) {
++ host->push_data = dw_mci_push_data16;
++ host->pull_data = dw_mci_pull_data16;
++ width = 16;
++ host->data_shift = 1;
++ } else if (i == 2) {
++ host->push_data = dw_mci_push_data64;
++ host->pull_data = dw_mci_pull_data64;
++ width = 64;
++ host->data_shift = 3;
++ } else {
++ /* Check for a reserved value, and warn if it is */
++ WARN((i != 1),
++ "HCON reports a reserved host data width!\n"
++ "Defaulting to 32-bit access.\n");
++ host->push_data = dw_mci_push_data32;
++ host->pull_data = dw_mci_pull_data32;
++ width = 32;
++ host->data_shift = 2;
++ }
++
++ /* Reset all blocks */
++ if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS))
++ return -ENODEV;
++
++ host->dma_ops = host->pdata->dma_ops;
++ dw_mci_init_dma(host);
++
++ /* Clear the interrupts for the host controller */
++ mci_writel(host, RINTSTS, 0xFFFFFFFF);
++ mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
++
++ /* Put in max timeout */
++ mci_writel(host, TMOUT, 0xFFFFFFFF);
++
++ /*
++ * FIFO threshold settings RxMark = fifo_size / 2 - 1,
++ * Tx Mark = fifo_size / 2 DMA Size = 8
++ */
++ if (!host->pdata->fifo_depth) {
++ /*
++ * Power-on value of RX_WMark is FIFO_DEPTH-1, but this may
++ * have been overwritten by the bootloader, just like we're
++ * about to do, so if you know the value for your hardware, you
++ * should put it in the platform data.
++ */
++ fifo_size = mci_readl(host, FIFOTH);
++ fifo_size = 1 + ((fifo_size >> 16) & 0xfff);
++ } else {
++ fifo_size = host->pdata->fifo_depth;
++ }
++ host->fifo_depth = fifo_size;
++ host->fifoth_val =
++ SDMMC_SET_FIFOTH(0x2, fifo_size / 2 - 1, fifo_size / 2);
++ mci_writel(host, FIFOTH, host->fifoth_val);
++
++ /* disable clock to CIU */
++ mci_writel(host, CLKENA, 0);
++ mci_writel(host, CLKSRC, 0);
++
++ /*
++ * In 2.40a spec, Data offset is changed.
++ * Need to check the version-id and set data-offset for DATA register.
++ */
++ host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
++ dev_info(host->dev, "Version ID is %04x\n", host->verid);
++
++ if (host->verid < DW_MMC_240A)
++ host->data_offset = DATA_OFFSET;
++ else
++ host->data_offset = DATA_240A_OFFSET;
++
++ tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
++ host->card_workqueue = alloc_workqueue("dw-mci-card",
++ WQ_MEM_RECLAIM, 1);
++ if (!host->card_workqueue) {
++ ret = -ENOMEM;
++ goto err_dmaunmap;
++ }
++ INIT_WORK(&host->card_work, dw_mci_work_routine_card);
++ ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
++ host->irq_flags, "dw-mci", host);
++ if (ret)
++ goto err_workqueue;
++
++ if (host->pdata->num_slots)
++ host->num_slots = host->pdata->num_slots;
++ else
++ host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
++
++ /*
++ * Enable interrupts for command done, data over, data empty, card det,
++ * receive ready and error such as transmit, receive timeout, crc error
++ */
++ mci_writel(host, RINTSTS, 0xFFFFFFFF);
++ mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
++ SDMMC_INT_TXDR | SDMMC_INT_RXDR |
++ DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
++ mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
++
++ dev_info(host->dev, "DW MMC controller at irq %d, "
++ "%d bit host data width, "
++ "%u deep fifo\n",
++ host->irq, width, fifo_size);
++
++ /* We need at least one slot to succeed */
++ for (i = 0; i < host->num_slots; i++) {
++ ret = dw_mci_init_slot(host, i);
++ if (ret)
++ dev_dbg(host->dev, "slot %d init failed\n", i);
++ else
++ init_slots++;
++ }
++
++ if (init_slots) {
++ dev_info(host->dev, "%d slots initialized\n", init_slots);
++ } else {
++ dev_dbg(host->dev, "attempted to initialize %d slots, "
++ "but failed on all\n", host->num_slots);
++ goto err_workqueue;
++ }
++
++ if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
++ dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
++
++ return 0;
++
++err_workqueue:
++ destroy_workqueue(host->card_workqueue);
++
++err_dmaunmap:
++ if (host->use_dma && host->dma_ops->exit)
++ host->dma_ops->exit(host);
++
++err_clk_ciu:
++ if (!IS_ERR(host->ciu_clk))
++ clk_disable_unprepare(host->ciu_clk);
++
++err_clk_biu:
++ if (!IS_ERR(host->biu_clk))
++ clk_disable_unprepare(host->biu_clk);
++
++ return ret;
++}
++EXPORT_SYMBOL(dw_mci_probe);
++
++void dw_mci_remove(struct dw_mci *host)
++{
++ int i;
++
++ mci_writel(host, RINTSTS, 0xFFFFFFFF);
++ mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
++
++ for (i = 0; i < host->num_slots; i++) {
++ dev_dbg(host->dev, "remove slot %d\n", i);
++ if (host->slot[i])
++ dw_mci_cleanup_slot(host->slot[i], i);
++ }
++
++ /* disable clock to CIU */
++ mci_writel(host, CLKENA, 0);
++ mci_writel(host, CLKSRC, 0);
++
++ destroy_workqueue(host->card_workqueue);
++
++ if (host->use_dma && host->dma_ops->exit)
++ host->dma_ops->exit(host);
++
++ if (!IS_ERR(host->ciu_clk))
++ clk_disable_unprepare(host->ciu_clk);
++
++ if (!IS_ERR(host->biu_clk))
++ clk_disable_unprepare(host->biu_clk);
++}
++EXPORT_SYMBOL(dw_mci_remove);
++
++
++
++#ifdef CONFIG_PM_SLEEP
++/*
++ * TODO: we should probably disable the clock to the card in the suspend path.
++ */
++int dw_mci_suspend(struct dw_mci *host)
++{
++ return 0;
++}
++EXPORT_SYMBOL(dw_mci_suspend);
++
++int dw_mci_resume(struct dw_mci *host)
++{
++ int i, ret;
++
++ if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
++ ret = -ENODEV;
++ return ret;
++ }
++
++ if (host->use_dma && host->dma_ops->init)
++ host->dma_ops->init(host);
++
++ /*
++ * Restore the initial value at FIFOTH register
++ * And Invalidate the prev_blksz with zero
++ */
++ mci_writel(host, FIFOTH, host->fifoth_val);
++ host->prev_blksz = 0;
++
++ /* Put in max timeout */
++ mci_writel(host, TMOUT, 0xFFFFFFFF);
++
++ mci_writel(host, RINTSTS, 0xFFFFFFFF);
++ mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
++ SDMMC_INT_TXDR | SDMMC_INT_RXDR |
++ DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
++ mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
++
++ for (i = 0; i < host->num_slots; i++) {
++ struct dw_mci_slot *slot = host->slot[i];
++ if (!slot)
++ continue;
++ if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
++ dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
++ dw_mci_setup_bus(slot, true);
++ }
++ }
++ return 0;
++}
++EXPORT_SYMBOL(dw_mci_resume);
++#endif /* CONFIG_PM_SLEEP */
++
++static int __init dw_mci_init(void)
++{
++ pr_info("Synopsys Designware Multimedia Card Interface Driver\n");
++ return 0;
++}
++
++static void __exit dw_mci_exit(void)
++{
++}
++
++module_init(dw_mci_init);
++module_exit(dw_mci_exit);
++
++MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
++MODULE_AUTHOR("NXP Semiconductor VietNam");
++MODULE_AUTHOR("Imagination Technologies Ltd");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-3.18.8.orig/include/linux/mmc/host.h linux-3.18.8/include/linux/mmc/host.h
+--- linux-3.18.8.orig/include/linux/mmc/host.h 2015-02-27 02:49:36.000000000 +0100
++++ linux-3.18.8/include/linux/mmc/host.h 2015-03-02 03:25:33.000000000 +0100
+@@ -305,6 +305,11 @@
+ unsigned long clkgate_delay;
+ #endif
+
++ /* card specific properties to deal with power and reset */
++ struct regulator *card_regulator; /* External VCC needed by the card */
++ struct gpio_desc *card_reset_gpios[2]; /* External resets, active low */
++ struct clk *card_clk; /* External clock needed by the card */
++
+ /* host specific block data */
+ unsigned int max_seg_size; /* see blk_queue_max_segment_size */
+ unsigned short max_segs; /* see blk_queue_max_segments */