update kernel versions, add separate modules-<version>.mk files to abstract patch name changes

1 files changed, 0 insertions, 136770 deletions

diff --git a/target/arm/bcm28xx/patches/3.18.10/0000-raspberry-pi.patch b/target/arm/bcm28xx/patches/3.18.10/0000-raspberry-pi.patch
deleted file mode 100644
index d9b021fc0..000000000
--- a/target/arm/bcm28xx/patches/3.18.10/0000-raspberry-pi.patch
+++ /dev/null
@@ -1,136770 +0,0 @@
-diff -Nur linux-3.18.10/arch/arm/boot/dts/ads7846-overlay.dts linux-rpi/arch/arm/boot/dts/ads7846-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/ads7846-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/ads7846-overlay.dts	2015-03-26 11:46:41.692226515 +0100
-@@ -0,0 +1,83 @@
-+/*
-+ * Generic Device Tree overlay for the ADS7846 touch controller
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			status = "okay";
-+
-+			spidev@0{
-+				status = "disabled";
-+			};
-+
-+			spidev@1{
-+				status = "disabled";
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			ads7846_pins: ads7846_pins {
-+				brcm,pins = <255>; /* illegal default value */
-+				brcm,function = <0>; /* in */
-+				brcm,pull = <0>; /* none */
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			ads7846: ads7846@1 {
-+				compatible = "ti,ads7846";
-+				reg = <1>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&ads7846_pins>;
-+
-+				spi-max-frequency = <2000000>;
-+				interrupts = <255 2>; /* high-to-low edge triggered */
-+				interrupt-parent = <&gpio>;
-+				pendown-gpio = <&gpio 255 0>;
-+
-+				/* driver defaults */
-+				ti,x-min = /bits/ 16 <0>;
-+				ti,y-min = /bits/ 16 <0>;
-+				ti,x-max = /bits/ 16 <0x0FFF>;
-+				ti,y-max = /bits/ 16 <0x0FFF>;
-+				ti,pressure-min = /bits/ 16 <0>;
-+				ti,pressure-max = /bits/ 16 <0xFFFF>;
-+				ti,x-plate-ohms = /bits/ 16 <400>;
-+			};
-+		};
-+	};
-+	__overrides__ {
-+		cs =     <&ads7846>,"reg:0";
-+		speed =  <&ads7846>,"spi-max-frequency:0";
-+		penirq = <&ads7846_pins>,"brcm,pins:0", /* REQUIRED */
-+			 <&ads7846>,"interrupts:0",
-+			 <&ads7846>,"pendown-gpio:4";
-+		penirq_pull = <&ads7846_pins>,"brcm,pull:0";
-+		swapxy = <&ads7846>,"ti,swap-xy?";
-+		xmin =   <&ads7846>,"ti,x-min;0";
-+		ymin =   <&ads7846>,"ti,y-min;0";
-+		xmax =   <&ads7846>,"ti,x-max;0";
-+		ymax =   <&ads7846>,"ti,y-max;0";
-+		pmin =   <&ads7846>,"ti,pressure-min;0";
-+		pmax =   <&ads7846>,"ti,pressure-max;0";
-+		xohms =  <&ads7846>,"ti,x-plate-ohms;0";
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/bcm2708.dtsi linux-rpi/arch/arm/boot/dts/bcm2708.dtsi
---- linux-3.18.10/arch/arm/boot/dts/bcm2708.dtsi	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/bcm2708.dtsi	2015-03-26 11:46:41.696226518 +0100
-@@ -0,0 +1,109 @@
-+/include/ "skeleton.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+	model = "BCM2708";
-+
-+	interrupt-parent = <&intc>;
-+
-+	chosen {
-+		/* No padding required - the boot loader can do that. */
-+		bootargs = "";
-+	};
-+
-+	soc: soc {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x7e000000 0x20000000 0x01000000>;
-+
-+		intc: interrupt-controller {
-+			compatible = "brcm,bcm2708-armctrl-ic";
-+			reg = <0x7e00b200 0x200>;
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
-+
-+		gpio: gpio {
-+			compatible = "brcm,bcm2835-gpio";
-+			reg = <0x7e200000 0xb4>;
-+			interrupts = <2 17>, <2 18>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
-+
-+		i2s: i2s@7e203000 {
-+			compatible = "brcm,bcm2708-i2s";
-+			reg = <0x7e203000 0x20>,
-+			      <0x7e101098 0x02>;
-+
-+			//dmas = <&dma 2>,
-+			//       <&dma 3>;
-+			dma-names = "tx", "rx";
-+			status = "disabled";
-+		};
-+
-+		spi0: spi@7e204000 {
-+			compatible = "brcm,bcm2708-spi";
-+			reg = <0x7e204000 0x1000>;
-+			interrupts = <2 22>;
-+			clocks = <&clk_spi>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c0: i2c@7e205000 {
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e205000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c1: i2c@7e804000 {
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e804000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		leds: leds {
-+			compatible = "gpio-leds";
-+		};
-+
-+		arm-pmu {
-+			compatible = "arm,arm1176-pmu";
-+		};
-+	};
-+
-+	clocks {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		clk_i2c: i2c {
-+			compatible = "fixed-clock";
-+			reg = <1>;
-+			#clock-cells = <0>;
-+			clock-frequency = <250000000>;
-+		};
-+
-+		clk_spi: clock@2 {
-+			compatible = "fixed-clock";
-+			reg = <2>;
-+			#clock-cells = <0>;
-+			clock-output-names = "spi";
-+			clock-frequency = <250000000>;
-+		};
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/bcm2708-rpi-b.dts linux-rpi/arch/arm/boot/dts/bcm2708-rpi-b.dts
---- linux-3.18.10/arch/arm/boot/dts/bcm2708-rpi-b.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/bcm2708-rpi-b.dts	2015-03-26 11:46:41.696226518 +0100
-@@ -0,0 +1,107 @@
-+/dts-v1/;
-+
-+/include/ "bcm2708.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+	model = "Raspberry Pi Model B";
-+
-+	aliases {
-+		soc = &soc;
-+		spi0 = &spi0;
-+		i2c0 = &i2c0;
-+		i2c1 = &i2c1;
-+		i2s  = &i2s;
-+		gpio = &gpio;
-+		intc = &intc;
-+		leds = &leds;
-+		sound = &sound;
-+	};
-+
-+	sound: sound {
-+	};
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <28 29 30 31>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 16 1>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts linux-rpi/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
---- linux-3.18.10/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts	2015-03-26 11:46:41.696226518 +0100
-@@ -0,0 +1,117 @@
-+/dts-v1/;
-+
-+/include/ "bcm2708.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+	model = "Raspberry Pi Model B+";
-+
-+	aliases {
-+		soc = &soc;
-+		spi0 = &spi0;
-+		i2c0 = &i2c0;
-+		i2c1 = &i2c1;
-+		i2s  = &i2s;
-+		gpio = &gpio;
-+		intc = &intc;
-+		leds = &leds;
-+		sound = &sound;
-+	};
-+
-+	sound: sound {
-+	};
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 47 0>;
-+	};
-+
-+	pwr_led: pwr {
-+		label = "led1";
-+		linux,default-trigger = "input";
-+		gpios = <&gpio 35 0>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+		pwr_led_gpio = <&pwr_led>,"gpios:4";
-+		pwr_led_activelow = <&pwr_led>,"gpios:8";
-+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/bcm2709.dtsi linux-rpi/arch/arm/boot/dts/bcm2709.dtsi
---- linux-3.18.10/arch/arm/boot/dts/bcm2709.dtsi	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/bcm2709.dtsi	2015-03-26 11:46:41.696226518 +0100
-@@ -0,0 +1,160 @@
-+/include/ "skeleton.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2709";
-+	model = "BCM2709";
-+
-+	interrupt-parent = <&intc>;
-+
-+	chosen {
-+		/* No padding required - the boot loader can do that. */
-+		bootargs = "";
-+	};
-+
-+	soc: soc {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges = <0x7e000000 0x3f000000 0x01000000>;
-+
-+		intc: interrupt-controller {
-+			compatible = "brcm,bcm2708-armctrl-ic";
-+			reg = <0x7e00b200 0x200>;
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
-+
-+		gpio: gpio {
-+			compatible = "brcm,bcm2835-gpio";
-+			reg = <0x7e200000 0xb4>;
-+			interrupts = <2 17>, <2 18>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
-+
-+		i2s: i2s@7e203000 {
-+			compatible = "brcm,bcm2708-i2s";
-+			reg = <0x7e203000 0x20>,
-+			      <0x7e101098 0x02>;
-+
-+			//dmas = <&dma 2>,
-+			//       <&dma 3>;
-+			dma-names = "tx", "rx";
-+			status = "disabled";
-+		};
-+
-+		spi0: spi@7e204000 {
-+			compatible = "brcm,bcm2708-spi";
-+			reg = <0x7e204000 0x1000>;
-+			interrupts = <2 22>;
-+			clocks = <&clk_spi>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c0: i2c@7e205000 {
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e205000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		i2c1: i2c@7e804000 {
-+			compatible = "brcm,bcm2708-i2c";
-+			reg = <0x7e804000 0x1000>;
-+			interrupts = <2 21>;
-+			clocks = <&clk_i2c>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		leds: leds {
-+			compatible = "gpio-leds";
-+		};
-+
-+		arm-pmu {
-+			compatible = "arm,cortex-a7-pmu";
-+			interrupts = <3 9>;
-+		};
-+	};
-+
-+	clocks {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		clk_i2c: i2c {
-+			compatible = "fixed-clock";
-+			reg = <1>;
-+			#clock-cells = <0>;
-+			clock-frequency = <250000000>;
-+		};
-+
-+		clk_spi: clock@2 {
-+			compatible = "fixed-clock";
-+			reg = <2>;
-+			#clock-cells = <0>;
-+			clock-output-names = "spi";
-+			clock-frequency = <250000000>;
-+		};
-+	};
-+
-+	timer {
-+		compatible = "arm,armv7-timer";
-+		clock-frequency = <19200000>;
-+		interrupts = <3 0>, // PHYS_SECURE_PPI
-+			     <3 1>, // PHYS_NONSECURE_PPI
-+			     <3 3>, // VIRT_PPI
-+			     <3 2>; // HYP_PPI
-+		always-on;
-+	};
-+
-+	cpus: cpus {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		v7_cpu0: cpu@0 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf00>;
-+			clock-frequency = <800000000>;
-+		};
-+
-+		v7_cpu1: cpu@1 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf01>;
-+			clock-frequency = <800000000>;
-+		};
-+
-+		v7_cpu2: cpu@2 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf02>;
-+			clock-frequency = <800000000>;
-+		};
-+
-+		v7_cpu3: cpu@3 {
-+			device_type = "cpu";
-+			compatible = "arm,cortex-a7";
-+			reg = <0xf03>;
-+			clock-frequency = <800000000>;
-+		};
-+	};
-+
-+	__overrides__ {
-+		arm_freq = <&v7_cpu0>, "clock-frequency:0",
-+		       <&v7_cpu1>, "clock-frequency:0",
-+		       <&v7_cpu2>, "clock-frequency:0",
-+		       <&v7_cpu3>, "clock-frequency:0";
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/bcm2709-rpi-2-b.dts linux-rpi/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
---- linux-3.18.10/arch/arm/boot/dts/bcm2709-rpi-2-b.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/bcm2709-rpi-2-b.dts	2015-03-26 11:46:41.696226518 +0100
-@@ -0,0 +1,117 @@
-+/dts-v1/;
-+
-+/include/ "bcm2709.dtsi"
-+
-+/ {
-+	compatible = "brcm,bcm2709";
-+	model = "Raspberry Pi 2 Model B";
-+
-+	aliases {
-+		soc = &soc;
-+		spi0 = &spi0;
-+		i2c0 = &i2c0;
-+		i2c1 = &i2c1;
-+		i2s  = &i2s;
-+		gpio = &gpio;
-+		intc = &intc;
-+		leds = &leds;
-+		sound = &sound;
-+	};
-+
-+	sound: sound {
-+	};
-+};
-+
-+&gpio {
-+	spi0_pins: spi0_pins {
-+		brcm,pins = <7 8 9 10 11>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+
-+	i2c0_pins: i2c0 {
-+		brcm,pins = <0 1>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2c1_pins: i2c1 {
-+		brcm,pins = <2 3>;
-+		brcm,function = <4>;
-+	};
-+
-+	i2s_pins: i2s {
-+		brcm,pins = <18 19 20 21>;
-+		brcm,function = <4>; /* alt0 */
-+	};
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins>;
-+
-+	spidev@0{
-+		compatible = "spidev";
-+		reg = <0>;	/* CE0 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+
-+	spidev@1{
-+		compatible = "spidev";
-+		reg = <1>;	/* CE1 */
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		spi-max-frequency = <500000>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2c1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c1_pins>;
-+	clock-frequency = <100000>;
-+};
-+
-+&i2s {
-+	#sound-dai-cells = <0>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2s_pins>;
-+};
-+
-+&leds {
-+	act_led: act {
-+		label = "led0";
-+		linux,default-trigger = "mmc0";
-+		gpios = <&gpio 47 0>;
-+	};
-+
-+	pwr_led: pwr {
-+		label = "led1";
-+		linux,default-trigger = "input";
-+		gpios = <&gpio 35 0>;
-+	};
-+};
-+
-+/ {
-+	__overrides__ {
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
-+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
-+
-+		pwr_led_gpio = <&pwr_led>,"gpios:4";
-+		pwr_led_activelow = <&pwr_led>,"gpios:8";
-+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/bmp085_i2c-sensor-overlay.dts linux-rpi/arch/arm/boot/dts/bmp085_i2c-sensor-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/bmp085_i2c-sensor-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/bmp085_i2c-sensor-overlay.dts	2015-03-26 11:46:41.696226518 +0100
-@@ -0,0 +1,23 @@
-+// Definitions for BMP085/BMP180 digital barometric pressure and temperature sensors from Bosch Sensortec
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+        compatible = "brcm,bcm2708";
-+
-+        fragment@0 {
-+                target = <&i2c1>;
-+                __overlay__ {
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+                        status = "okay";
-+
-+                        bmp085@77 {
-+                                compatible = "bosch,bmp085";
-+                                reg = <0x77>;
-+                                default-oversampling = <3>;
-+                                status = "okay";
-+                        };
-+                };
-+        };
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/ds1307-rtc-overlay.dts linux-rpi/arch/arm/boot/dts/ds1307-rtc-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/ds1307-rtc-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/ds1307-rtc-overlay.dts	2015-03-26 11:46:41.700226520 +0100
-@@ -0,0 +1,22 @@
-+// Definitions for DS1307 Real Time Clock
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target = <&i2c1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			ds1307@68 {
-+				compatible = "maxim,ds1307";
-+				reg = <0x68>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/enc28j60-overlay.dts linux-rpi/arch/arm/boot/dts/enc28j60-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/enc28j60-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/enc28j60-overlay.dts	2015-03-26 11:46:41.700226520 +0100
-@@ -0,0 +1,29 @@
-+// Overlay for the Microchip ENC28J60 Ethernet Controller
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			status = "okay";
-+
-+			spidev@0{
-+				status = "disabled";
-+			};
-+
-+			enc28j60@0{
-+				compatible = "microchip,enc28j60";
-+				reg = <0>; /* CE0 */
-+				spi-max-frequency = <12000000>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/hifiberry-amp-overlay.dts linux-rpi/arch/arm/boot/dts/hifiberry-amp-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/hifiberry-amp-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/hifiberry-amp-overlay.dts	2015-03-26 11:46:41.700226520 +0100
-@@ -0,0 +1,39 @@
-+// Definitions for HiFiBerry Amp/Amp+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target = <&sound>;
-+		__overlay__ {
-+			compatible = "hifiberry,hifiberry-amp";
-+			i2s-controller = <&i2s>;
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&i2s>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&i2c1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			tas5713@1b {
-+				#sound-dai-cells = <0>;
-+				compatible = "ti,tas5713";
-+				reg = <0x1b>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/hifiberry-dac-overlay.dts linux-rpi/arch/arm/boot/dts/hifiberry-dac-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/hifiberry-dac-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/hifiberry-dac-overlay.dts	2015-03-26 11:46:41.700226520 +0100
-@@ -0,0 +1,34 @@
-+// Definitions for HiFiBerry DAC
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target = <&sound>;
-+		__overlay__ {
-+			compatible = "hifiberry,hifiberry-dac";
-+			i2s-controller = <&i2s>;
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&i2s>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@2 {
-+		target-path = "/";
-+		__overlay__ {
-+			pcm5102a-codec {
-+				#sound-dai-cells = <0>;
-+				compatible = "ti,pcm5102a";
-+				status = "okay";
-+			};
-+		};
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/hifiberry-dacplus-overlay.dts linux-rpi/arch/arm/boot/dts/hifiberry-dacplus-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/hifiberry-dacplus-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/hifiberry-dacplus-overlay.dts	2015-03-26 11:46:41.700226520 +0100
-@@ -0,0 +1,39 @@
-+// Definitions for HiFiBerry DAC+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target = <&sound>;
-+		__overlay__ {
-+			compatible = "hifiberry,hifiberry-dacplus";
-+			i2s-controller = <&i2s>;
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&i2s>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&i2c1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			pcm5122@4d {
-+				#sound-dai-cells = <0>;
-+				compatible = "ti,pcm5122";
-+				reg = <0x4d>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/hifiberry-digi-overlay.dts linux-rpi/arch/arm/boot/dts/hifiberry-digi-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/hifiberry-digi-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/hifiberry-digi-overlay.dts	2015-03-26 11:46:41.700226520 +0100
-@@ -0,0 +1,39 @@
-+// Definitions for HiFiBerry Digi
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2708";
-+
-+	fragment@0 {
-+		target = <&sound>;
-+		__overlay__ {
-+			compatible = "hifiberry,hifiberry-digi";
-+			i2s-controller = <&i2s>;
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&i2s>;
-+		__overlay__ {
-+			status = "okay";
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&i2c1>;
-+		__overlay__ {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			wm8804@3b {
-+				#sound-dai-cells = <0>;
-+				compatible = "wlf,wm8804";
-+				reg = <0x3b>;
-+				status = "okay";
-+			};
-+		};
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/hy28a-overlay.dts linux-rpi/arch/arm/boot/dts/hy28a-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/hy28a-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/hy28a-overlay.dts	2015-03-26 11:46:41.700226520 +0100
-@@ -0,0 +1,87 @@
-+/*
-+ * Device Tree overlay for HY28A display
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			status = "okay";
-+
-+			spidev@0{
-+				status = "disabled";
-+			};
-+
-+			spidev@1{
-+				status = "disabled";
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			hy28a_pins: hy28a_pins {
-+				brcm,pins = <17 25 18>;
-+				brcm,function = <0 1 1>; /* in out out */
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			hy28a: hy28a@0{
-+				compatible = "ilitek,ili9320";
-+				reg = <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&hy28a_pins>;
-+
-+				spi-max-frequency = <32000000>;
-+				spi-cpol;
-+				spi-cpha;
-+				rotate = <270>;
-+				bgr;
-+				fps = <50>;
-+				buswidth = <8>;
-+				startbyte = <0x70>;
-+				reset-gpios = <&gpio 25 0>;
-+				led-gpios = <&gpio 18 1>;
-+				debug = <0>;
-+			};
-+
-+			hy28a_ts: hy28a-ts@1 {
-+				compatible = "ti,ads7846";
-+				reg = <1>;
-+
-+				spi-max-frequency = <2000000>;
-+				interrupts = <17 2>; /* high-to-low edge triggered */
-+				interrupt-parent = <&gpio>;
-+				pendown-gpio = <&gpio 17 0>;
-+				ti,x-plate-ohms = /bits/ 16 <100>;
-+				ti,pressure-max = /bits/ 16 <255>;
-+			};
-+		};
-+	};
-+	__overrides__ {
-+		speed =		<&hy28a>,"spi-max-frequency:0";
-+		rotate =	<&hy28a>,"rotate:0";
-+		fps =		<&hy28a>,"fps:0";
-+		debug =		<&hy28a>,"debug:0";
-+		xohms =		<&hy28a_ts>,"ti,x-plate-ohms;0";
-+		resetgpio =	<&hy28a>,"reset-gpios:4",
-+				<&hy28a_pins>, "brcm,pins:1";
-+		ledgpio =	<&hy28a>,"led-gpios:4",
-+				<&hy28a_pins>, "brcm,pins:2";
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/hy28b-overlay.dts linux-rpi/arch/arm/boot/dts/hy28b-overlay.dts
---- linux-3.18.10/arch/arm/boot/dts/hy28b-overlay.dts	1970-01-01 01:00:00.000000000 +0100
-+++ linux-rpi/arch/arm/boot/dts/hy28b-overlay.dts	2015-03-26 11:46:41.700226520 +0100
-@@ -0,0 +1,142 @@
-+/*
-+ * Device Tree overlay for HY28b display shield by Texy
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+	fragment@0 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			status = "okay";
-+
-+			spidev@0{
-+				status = "disabled";
-+			};
-+
-+			spidev@1{
-+				status = "disabled";
-+			};
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			hy28b_pins: hy28b_pins {
-+				brcm,pins = <17 25 18>;
-+				brcm,function = <0 1 1>; /* in out out */
-+			};
-+		};
-+	};
-+
-+	fragment@2 {
-+		target = <&spi0>;
-+		__overlay__ {
-+			/* needed to avoid dtc warning */
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			hy28b: hy28b@0{
-+				compatible = "ilitek,ili9325";
-+				reg = <0>;
-+				pinctrl-names = "default";
-+				pinctrl-0 = <&hy28b_pins>;
-+
-+				spi-max-frequency = <48000000>;
-+				spi-cpol;
-+				spi-cpha;
-+				rotate = <270>;
-+				bgr;
-+				fps = <50>;
-+				buswidth = <8>;
-+				startbyte = <0x70>;
-+				reset-gpios = <&gpio 25 0>;
-+				led-gpios = <&gpio 18 1>;
-+
-+				gamma = "04 1F 4 7 7 0 7 7 6 0\n0F 00 1 7 4 0 0 0 6 7";
-+
-+				init = <0x10000e7 0x0010
-+					0x1000000 0x0001
-+					0x1000001 0x0100
-+					0x1000002 0x0700
-+				        0x1000003 0x1030
-+					0x1000004 0x0000
-+					0x1000008 0x0207
-+					0x1000009 0x0000
-+				        0x100000a 0x0000
-+					0x100000c 0x0001
-+					0x100000d 0x0000
-+					0x100000f 0x0000
-+				        0x1000010 0x0000
-+					0x1000011 0x0007
-+					0x1000012 0x0000
-+					0x1000013 0x0000
-+				        0x2000032
-+					0x1000010 0x1590
-+					0x1000011 0x0227
-+				        0x2000032
-+					0x1000012 0x009c
-+				        0x2000032
-+				        0x1000013 0x1900
-+					0x1000029 0x0023
-+					0x100002b 0x000e
-+				        0x2000032
-+				        0x1000020 0x0000
-+					0x1000021 0x0000
-+				        0x2000032
-+					0x1000050 0x0000
-+				        0x1000051 0x00ef
-+					0x1000052 0x0000
-+					0x1000053 0x013f
-+					0x1000060 0xa700
-+				        0x1000061 0x0001
-+					0x100006a 0x0000
-+					0x1000080 0x0000
-+					0x1000081 0x0000
-+				        0x1000082 0x0000
-+					0x1000083 0x0000
-+					0x1000084 0x0000
-+					0x1000085 0x0000
-+				        0x1000090 0x0010
-+					0x1000092 0x0000
-+					0x1000093 0x0003
-+					0x1000095 0x0110
-+				        0x1000097 0x0000
-+					0x1000098 0x0000
-+					0x1000007 0x0133
-+					0x1000020 0x0000
-+				        0x1000021 0x0000
-+				        0x2000064>;
-+				debug = <0>;
-+			};
-+
-+			hy28b_ts: hy28b-ts@1 {
-+				compatible = "ti,ads7846";
-+				reg = <1>;
-+
-+				spi-max-frequency = <2000000>;
-+				interrupts = <17 2>; /* high-to-low edge triggered */
-+				interrupt-parent = <&gpio>;
-+				pendown-gpio = <&gpio 17 0>;
-+				ti,x-plate-ohms = /bits/ 16 <100>;
-+				ti,pressure-max = /bits/ 16 <255>;
-+			};
-+		};
-+	};
-+	__overrides__ {
-+		speed = 	<&hy28b>,"spi-max-frequency:0";
-+		rotate = 	<&hy28b>,"rotate:0";
-+		fps = 		<&hy28b>,"fps:0";
-+		debug = 	<&hy28b>,"debug:0";
-+		xohms =		<&hy28b_ts>,"ti,x-plate-ohms;0";
-+		resetgpio =	<&hy28b>,"reset-gpios:4",
-+				<&hy28b_pins>, "brcm,pins:1";
-+		ledgpio =	<&hy28b>,"led-gpios:4",
-+				<&hy28b_pins>, "brcm,pins:2";
-+	};
-+};
-diff -Nur linux-3.18.10/arch/arm/boot/dts/i2c-rtc-overlay.dts linux-rpi/a