add DT trailer to kernel for raspberry pi with dt

The Kernel need a trailer to be recognized as a device-tree
kernel. The overlay dir is called /boot/overlays.

Now my driver works fine.

2 files changed, 248 insertions, 2 deletions

diff --git a/scripts/install.sh b/scripts/install.sh
index a80c8965d..50ecfc5b0 100755
--- a/scripts/install.sh
+++ b/scripts/install.sh
@@ -547,9 +547,9 @@ case $target {
 		[[ -e "$x" ]] && cp "$fwdir"/*.dtb "$B/"
 		break
 	done
-	mkdir "$B/"overlay
+	mkdir "$B/"overlays
 	for x in "$B/"*-overlay.dtb; do
-		[[ -e "$x" ]] && mv "$B/"*-overlay.dtb "$B/"overlay
+		[[ -e "$x" ]] && mv "$B/"*-overlay.dtb "$B/"overlays
 		break
 	done
 	umount_fs "$B"
diff --git a/scripts/mkknlimg b/scripts/mkknlimg
new file mode 100755
index 000000000..cfd76d569
--- /dev/null
+++ b/scripts/mkknlimg
@@ -0,0 +1,246 @@
+#!/usr/bin/env perl
+
+use strict;
+use integer;
+
+my $trailer_magic = 'RPTL';
+
+my $tmpfile1 = "/tmp/mkknlimg_$$.1";
+my $tmpfile2 = "/tmp/mkknlimg_$$.2";
+
+my $dtok = 0;
+
+while ($ARGV[0] =~ /^-/)
+{
+    my $arg = shift(@ARGV);
+    if ($arg eq '--dtok')
+    {
+	$dtok = 1;
+    }
+    else
+    {
+	print ("* Unknown option '$arg'\n");
+	usage();
+    }
+}
+
+usage() if (@ARGV != 2);
+
+my $kernel_file = $ARGV[0];
+my $out_file = $ARGV[1];
+
+if (! -r $kernel_file)
+{
+    print ("* File '$kernel_file' not found\n");
+    usage();
+}
+
+my @wanted_config_lines =
+(
+	'CONFIG_BCM2708_DT'
+);
+
+my @wanted_strings =
+(
+	'bcm2708_fb',
+	'brcm,bcm2708-pinctrl',
+	'brcm,bcm2835-gpio',
+	'of_find_property'
+);
+
+my $res = try_extract($kernel_file, $tmpfile1);
+$res = try_decompress('\037\213\010', 'xy',    'gunzip', 0,
+		      $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
+$res = try_decompress('\3757zXZ\000', 'abcde', 'unxz --single-stream', -1,
+		      $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
+$res = try_decompress('BZh',          'xy',    'bunzip2', 0,
+		      $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
+$res = try_decompress('\135\0\0\0',   'xxx',   'unlzma', 0,
+		      $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
+$res = try_decompress('\211\114\132', 'xy',    'lzop -d', 0,
+		      $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
+$res = try_decompress('\002\041\114\030', 'xy',    'lz4 -d', 1,
+		      $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
+
+my $append_trailer;
+my $trailer;
+
+$append_trailer = $dtok;
+
+if ($res)
+{
+    print("Version: $res->{''}\n");
+
+    $append_trailer = $dtok;
+    if (!$dtok)
+    {
+	if (config_bool($res, 'bcm2708_fb'))
+	{
+	    $dtok ||= config_bool($res, 'CONFIG_BCM2708_DT');
+	    $dtok ||= config_bool($res, 'brcm,bcm2708-pinctrl');
+	    $dtok ||= config_bool($res, 'brcm,bcm2835-gpio');
+	    $append_trailer = 1;
+	}
+	else
+	{
+	    print ("* This doesn't look like a Raspberry Pi kernel. In pass-through mode.\n");
+	}
+    }
+}
+elsif (!$dtok)
+{
+    print ("* Is this a valid kernel? In pass-through mode.\n");
+}
+
+if ($append_trailer)
+{
+    printf("DT: %s\n", $dtok ? "y" : "n");
+
+    my @atoms;
+
+    push @atoms, [ $trailer_magic, pack('V', 0) ];
+    push @atoms, [ 'KVer', $res->{''} ];
+    push @atoms, [ 'DTOK', pack('V', $dtok) ];
+
+    $trailer = pack_trailer(\@atoms);
+    $atoms[0]->[1] = pack('V', length($trailer));
+
+    $trailer = pack_trailer(\@atoms);
+}
+
+my $ofh;
+my $total_len = 0;
+
+if ($out_file eq $kernel_file)
+{
+    die "* Failed to open '$out_file' for append\n"
+	if (!open($ofh, '>>', $out_file));
+    $total_len = tell($ofh);
+}
+else
+{
+    die "* Failed to open '$kernel_file'\n"
+	if (!open(my $ifh, '<', $kernel_file));
+    die "* Failed to create '$out_file'\n"
+	if (!open($ofh, '>', $out_file));
+
+    my $copybuf;
+    while (1)
+    {
+	my $bytes = sysread($ifh, $copybuf, 64*1024);
+	last if (!$bytes);
+	syswrite($ofh, $copybuf, $bytes);
+	$total_len += $bytes;
+    }
+    close($ifh);
+}
+
+if ($trailer)
+{
+    # Pad to word-alignment
+    syswrite($ofh, "\x000\x000\x000", (-$total_len & 0x3));
+    syswrite($ofh, $trailer);
+}
+
+close($ofh);
+
+exit($trailer ? 0 : 1);
+
+END {
+	unlink($tmpfile1) if ($tmpfile1);
+	unlink($tmpfile2) if ($tmpfile2);
+}
+
+
+sub usage
+{
+	print ("Usage: mkknlimg [--dtok] <vmlinux|zImage|bzImage> <outfile>\n");
+	exit(1);
+}
+
+sub try_extract
+{
+	my ($knl, $tmp) = @_;
+
+	my $ver = `strings "$knl" | grep -a -E "^Linux version [1-9]"`;
+
+	return undef if (!$ver);
+
+	chomp($ver);
+
+	my $res = { ''=>$ver };
+	my $string_pattern = '^('.join('|', @wanted_strings).')$';
+
+	my @matches = `strings \"$knl\" | grep -E \"$string_pattern\"`;
+	foreach my $match (@matches)
+	{
+	    chomp($match);
+	    $res->{$match} = 1;
+	}
+
+	my $config_pattern = '^('.join('|', @wanted_config_lines).')=(.*)$';
+	my $cf1 = 'IKCFG_ST\037\213\010';
+	my $cf2 = '0123456789';
+
+	my $pos = `tr "$cf1\n$cf2" "\n$cf2=" < "$knl" | grep -abo "^$cf2"`;
+	if ($pos)
+	{
+		$pos =~ s/:.*[\r\n]*$//s;
+		$pos += 8;
+		my $err = (system("tail -c+$pos \"$knl\" | zcat > $tmp 2> /dev/null") >> 8);
+		if (($err == 0) || ($err == 2))
+		{
+			if (open(my $fh, '<', $tmp))
+			{
+				while (my $line = <$fh>)
+				{
+					chomp($line);
+					$res->{$1} = $2 if ($line =~ /$config_pattern/);
+				}
+
+				close($fh);
+			}
+		}
+	}
+
+	return $res;
+}
+
+
+sub try_decompress
+{
+	my ($magic, $subst, $zcat, $idx, $knl, $tmp1, $tmp2) = @_;
+
+	my $pos = `tr "$magic\n$subst" "\n$subst=" < "$knl" | grep -abo "^$subst"`;
+	if ($pos)
+	{
+		chomp($pos);
+		$pos = (split(/[\r\n]+/, $pos))[$idx];
+		$pos =~ s/:.*[\r\n]*$//s;
+		my $cmd = "tail -c+$pos \"$knl\" | $zcat > $tmp2 2> /dev/null";
+		my $err = (system($cmd) >> 8);
+		return undef if (($err != 0) && ($err != 2));
+
+		return try_extract($tmp2, $tmp1);
+	}
+
+	return undef;
+}
+
+sub pack_trailer
+{
+	my ($atoms) = @_;
+	my $trailer = pack('VV', 0, 0);
+	for (my $i = $#$atoms; $i>=0; $i--)
+	{
+		my $atom = $atoms->[$i];
+		$trailer .= pack('a*x!4Va4', $atom->[1], length($atom->[1]), $atom->[0]);
+	}
+	return $trailer;
+}
+
+sub config_bool
+{
+	my ($configs, $wanted) = @_;
+	return (($configs->{$wanted} eq 'y') || ($configs->{$wanted} eq '1'));
+}