add support for wireless access point with p54usb stick

8 files changed, 139 insertions, 28 deletions

diff --git a/package/Config.in b/package/Config.in
index 70565cb36..784f0a51f 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -567,8 +567,9 @@ source "package/hostapd/Config.in"
 source "package/iw/Config.in"
 #source "package/kismet/Config.in"
 source "package/olsrd/Config.in"
+source "package/p54-firmware/Config.in"
+source "package/rt61-firmware/Config.in"
 source "package/wifidog/Config.in"
-source "package/wireless-firmware/Config.in"
 source "package/wpa_supplicant/Config.in"
 endmenu
 
diff --git a/package/aufs2-util/Makefile b/package/aufs2-util/Makefile
index 2534a47af..c414a1ca2 100644
--- a/package/aufs2-util/Makefile
+++ b/package/aufs2-util/Makefile
@@ -20,10 +20,6 @@ $(eval $(call PKG_template,AUFS_UTIL,${PKG_NAME},${PKG_VERSION}-${PKG_RELEASE},$
 CONFIG_STYLE:=		manual
 MAKE_FLAGS+=		KDIR=${LINUX_DIR}
 
-do-extract:
-	mkdir -p ${WRKBUILD}
-	${CP} ./src/* ${WRKBUILD}/
-
 post-install:
 	$(INSTALL_DIR) $(IDIR_AUFS_UTIL)/sbin
 	$(INSTALL_BIN) ${WRKINST}/sbin/{u,}mount.aufs \
diff --git a/package/base-files/src/etc/network/if-post-down.d/03-wireless b/package/base-files/src/etc/network/if-post-down.d/03-wireless
new file mode 100755
index 000000000..66e92639b
--- /dev/null
+++ b/package/base-files/src/etc/network/if-post-down.d/03-wireless
@@ -0,0 +1,15 @@
+#!/bin/sh 
+set -e 
+
+[ "${IFACE%%[0-9]*}" = "wlan" ] || exit 0
+
+case "$IF_WIRELESS_MODE" in
+	ap)
+		logger -t hostap "Killing hostapd"
+		pkill hostapd
+		;;
+	*)
+		exit 0
+		;;
+esac
+exit 0
diff --git a/package/base-files/src/etc/network/if-pre-up.d/04-wireless b/package/base-files/src/etc/network/if-pre-up.d/04-wireless
new file mode 100755
index 000000000..54864ba78
--- /dev/null
+++ b/package/base-files/src/etc/network/if-pre-up.d/04-wireless
@@ -0,0 +1,86 @@
+#!/bin/sh 
+#set -x
+set -e 
+
+[ -x /usr/sbin/iw ] || exit 0
+
+[ "${IFACE%%[0-9]*}" = "wlan" ] || exit 0
+
+[ "$IF_WIRELESS_SSID" ] || exit 1
+[ "$IF_WIRELESS_CHANNEL" ] || exit 1
+[ "$IF_WIRELESS_HWMODE" ] || IF_WIRELESS_HWMODE=g
+
+wpa=0
+wpa1=0
+wpa2=0
+
+case "$IF_WIRELESS_SECURITY" in
+	none)
+		sec=1
+		;;
+	wep)
+		sec=2
+		;;
+	wpa)
+		sec=1
+		wpa1=1
+		;;
+	wpa2)
+		sec=1
+		wpa2=1
+		;;
+	wpa+wpa2)
+		sec=1
+		wpa=1
+		;;
+	*)
+		sec=1
+		;;
+esac
+
+case "$IF_WIRELESS_MODE" in
+	ap)
+		[ -x /usr/sbin/hostapd ] || {
+			logger -t hostap "No hostapd program found"
+			exit 1
+		}
+		logger -t hostap "Creating hostapd configuration"
+		cat /etc/hostapd.conf > /tmp/hostapd.conf
+		chmod 600 /tmp/hostapd.conf
+		echo "interface=${IFACE}" >> /tmp/hostapd.conf
+		echo "ssid=$IF_WIRELESS_SSID" >> /tmp/hostapd.conf
+		echo "channel=$IF_WIRELESS_CHANNEL" >> /tmp/hostapd.conf
+		echo "hw_mode=$IF_WIRELESS_HWMODE" >> /tmp/hostapd.conf
+		echo "auth_algs=$sec" >> /tmp/hostapd.conf
+		[ $wpa1 -eq 1 ] && {
+			logger -t hostap "using WPA for security"
+			echo "wpa=1" >> /tmp/hostapd.conf
+			echo "wpa_key_mgmt=WPA-PSK" >> /tmp/hostapd.conf
+			echo "wpa_pairwise=TKIP" >> /tmp/hostapd.conf
+			echo "wpa_passphrase=$IF_WIRELESS_PASSPHRASE" >> /tmp/hostapd.conf
+		}
+		[ $wpa2 -eq 1 ] && {
+			logger -t hostap "using WPA2 for security"
+			echo "wpa=2" >> /tmp/hostapd.conf
+			echo "wpa_key_mgmt=WPA-PSK" >> /tmp/hostapd.conf
+			echo "rsn_pairwise=CCMP" >> /tmp/hostapd.conf
+			echo "wpa_passphrase=$IF_WIRELESS_PASSPHRASE" >> /tmp/hostapd.conf
+		}
+		[ $wpa -eq 1 ] && {
+			logger -t hostap "using WPA and WPA2 for security"
+			echo "wpa=3" >> /tmp/hostapd.conf
+			echo "wpa_key_mgmt=WPA-PSK" >> /tmp/hostapd.conf
+			echo "wpa_pairwise=TKIP" >> /tmp/hostapd.conf
+			echo "rsn_pairwise=CCMP" >> /tmp/hostapd.conf
+			echo "wpa_passphrase=$IF_WIRELESS_PASSPHRASE" >> /tmp/hostapd.conf
+		}
+		logger -t hostap "Starting hostapd"
+		hostapd -B /tmp/hostapd.conf
+		;;
+	*)
+		echo "Unknown operation mode $IF_WIRELESS_MODE given!"
+		exit 1
+		;;
+esac
+
+exit 0
diff --git a/package/hostapd/files/hostapd.conf b/package/hostapd/files/hostapd.conf
index 8676e96a6..94bd1f2bc 100644
--- a/package/hostapd/files/hostapd.conf
+++ b/package/hostapd/files/hostapd.conf
@@ -1,6 +1,4 @@
 ##### hostapd configuration file #####
-interface=wlan0
-#bridge=br0
 driver=nl80211
 logger_syslog=-1
 logger_syslog_level=0
@@ -8,16 +6,3 @@ logger_stdout=-1
 logger_stdout_level=0
 ctrl_interface=/var/run/hostapd
 ctrl_interface_group=0
-# set ssid, channel and mode
-ssid=openadk
-hw_mode=g
-channel=1
-# enable WPA2 (WEP/WPA disabled)
-macaddr_acl=0
-auth_algs=1
-ignore_broadcast_ssid=0
-wpa=2
-wpa_passphrase=secret123
-wpa_key_mgmt=WPA-PSK
-wpa_pairwise=TKIP
-rsn_pairwise=CCMP
diff --git a/package/iw/Makefile b/package/iw/Makefile
index d2ea171a6..4d55ffd28 100644
--- a/package/iw/Makefile
+++ b/package/iw/Makefile
@@ -4,9 +4,9 @@
 include ${TOPDIR}/rules.mk
 
 PKG_NAME:=		iw
-PKG_VERSION:=		0.9.18
+PKG_VERSION:=		0.9.19
 PKG_RELEASE:=		1
-PKG_MD5SUM:=		9734080d8a5c4b768c5e0da665a48950
+PKG_MD5SUM:=		3b88743f9c6ce8a7e2f5fd7d18fdea42
 PKG_DESCR:=		Tools for setting up WiFi cards via netlink (nl80211)
 PKG_SECTION:=		net
 PKG_DEPENDS:=		libnl
@@ -22,8 +22,6 @@ $(eval $(call PKG_template,IW,${PKG_NAME},${PKG_VERSION}-${PKG_RELEASE},${PKG_DE
 
 CONFIG_STYLE:=		manual
 
-XAKE_FLAGS:=		V=1
-
 post-install:
 	${INSTALL_DIR} ${IDIR_IW}/usr/sbin
 	${INSTALL_BIN} ${WRKINST}/usr/sbin/iw ${IDIR_IW}/usr/sbin
diff --git a/package/p54-firmware/Makefile b/package/p54-firmware/Makefile
new file mode 100644
index 000000000..b845174a6
--- /dev/null
+++ b/package/p54-firmware/Makefile
@@ -0,0 +1,30 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include ${TOPDIR}/rules.mk
+
+PKG_NAME:=		p54-firmware
+PKG_VERSION:=		1
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		8e8ab005a4f8f0123bcdc51bc25b47f6
+PKG_DESCR:=		firmware for USB prism54 wireless cards (isl3887)
+PKG_SECTION:=		sys
+PKG_SITES:=		http://daemonizer.de/prism54/prism54-fw/fw-usb/
+
+DISTFILES:=		2.13.24.0.lm87.arm
+WRKDIST=		${WRKDIR}
+
+include ${TOPDIR}/mk/package.mk
+
+$(eval $(call PKG_template,P54_FIRMWARE,p54-firmware,${PKG_VERSION}-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
+
+CONFIG_STYLE:=          manual
+BUILD_STYLE:=           manual
+INSTALL_STYLE:=         manual
+
+do-install:
+	${INSTALL_DIR} ${IDIR_P54_FIRMWARE}/lib/firmware
+	${CP} ${WRKBUILD}/*.arm \
+		${IDIR_P54_FIRMWARE}/lib/firmware/isl3887usb
+
+include ${TOPDIR}/mk/pkg-bottom.mk
diff --git a/package/wireless-firmware/Makefile b/package/rt61-firmware/Makefile
index 25de67aff..650dd9f30 100644
--- a/package/wireless-firmware/Makefile
+++ b/package/rt61-firmware/Makefile
@@ -3,7 +3,7 @@
 
 include ${TOPDIR}/rules.mk
 
-PKG_NAME:=		wireless-firmware
+PKG_NAME:=		rt61-firmware
 PKG_VERSION:=		1
 PKG_RELEASE:=		1
 PKG_MD5SUM:=		d4c690c93b470bc9a681297c2adc6281
@@ -16,15 +16,15 @@ WRKDIST=		${WRKDIR}/RT61_Firmware_V1.2
 
 include ${TOPDIR}/mk/package.mk
 
-$(eval $(call PKG_template,WIRELESS_FIRMWARE_RT61,wireless-firmware-rt61,${PKG_VERSION}-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
+$(eval $(call PKG_template,RT61_FIRMWARE,rt61-firmware,${PKG_VERSION}-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
 
 CONFIG_STYLE:=          manual
 BUILD_STYLE:=           manual
 INSTALL_STYLE:=         manual
 
 do-install:
-	${INSTALL_DIR} ${IDIR_WIRELESS_FIRMWARE_RT61}/lib/firmware
+	${INSTALL_DIR} ${IDIR_RT61_FIRMWARE}/lib/firmware
 	${CP} ${WRKBUILD}/rt2*.bin \
-		${IDIR_WIRELESS_FIRMWARE_RT61}/lib/firmware
+		${IDIR_RT61_FIRMWARE}/lib/firmware
 
 include ${TOPDIR}/mk/pkg-bottom.mk