update valgrind, add debian patches for armv6 support, works on raspberry pi now

1 files changed, 522 insertions, 0 deletions

diff --git a/package/valgrind/patches/patch-Makefile_in b/package/valgrind/patches/patch-Makefile_in
new file mode 100644
index 000000000..35d1ff5e1
--- /dev/null
+++ b/package/valgrind/patches/patch-Makefile_in
@@ -0,0 +1,522 @@
+--- valgrind-3.7.0.orig/Makefile.in	2011-11-05 12:26:55.000000000 +0100
++++ valgrind-3.7.0/Makefile.in	2013-07-23 12:27:52.000000000 +0200
+@@ -1,4 +1,4 @@
+-# Makefile.in generated by automake 1.11.1 from Makefile.am.
++# Makefile.in generated by automake 1.10.3 from Makefile.am.
+ # @configure_input@
+ 
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+@@ -26,9 +26,8 @@
+ 
+ VPATH = @srcdir@
+ pkgdatadir = $(datadir)/@PACKAGE@
+-pkgincludedir = $(includedir)/@PACKAGE@
+ pkglibdir = $(libdir)/@PACKAGE@
+-pkglibexecdir = $(libexecdir)/@PACKAGE@
++pkgincludedir = $(includedir)/@PACKAGE@
+ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+ install_sh_DATA = $(install_sh) -c -m 644
+ install_sh_PROGRAM = $(install_sh) -c
+@@ -63,7 +62,6 @@ mkinstalldirs = $(install_sh) -d
+ CONFIG_HEADER = config.h
+ CONFIG_CLEAN_FILES = valgrind.spec valgrind.pc glibc-2.X.supp \
+ 	drd/scripts/download-and-build-splash2
+-CONFIG_CLEAN_VPATH_FILES =
+ SCRIPTS = $(dist_noinst_SCRIPTS)
+ SOURCES =
+ DIST_SOURCES =
+@@ -79,65 +77,25 @@ am__vpath_adj = case $$p in \
+     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+     *) f=$$p;; \
+   esac;
+-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+-am__install_max = 40
+-am__nobase_strip_setup = \
+-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+-am__nobase_strip = \
+-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+-am__nobase_list = $(am__nobase_strip_setup); \
+-  for p in $$list; do echo "$$p $$p"; done | \
+-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+-    if (++n[$$2] == $(am__install_max)) \
+-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+-    END { for (dir in files) print dir, files[dir] }'
+-am__base_list = \
+-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+ am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkglibdir)" \
+ 	"$(DESTDIR)$(pkgincludedir)"
++pkgconfigDATA_INSTALL = $(INSTALL_DATA)
++pkglibDATA_INSTALL = $(INSTALL_DATA)
+ DATA = $(dist_noinst_DATA) $(pkgconfig_DATA) $(pkglib_DATA)
++pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
+ HEADERS = $(pkginclude_HEADERS)
+ RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+   distclean-recursive maintainer-clean-recursive
+-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+-	distdir dist dist-all distcheck
+ ETAGS = etags
+ CTAGS = ctags
+ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ distdir = $(PACKAGE)-$(VERSION)
+ top_distdir = $(distdir)
+ am__remove_distdir = \
+-  { test ! -d "$(distdir)" \
+-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+-         && rm -fr "$(distdir)"; }; }
+-am__relativize = \
+-  dir0=`pwd`; \
+-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+-  sed_rest='s,^[^/]*/*,,'; \
+-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+-  sed_butlast='s,/*[^/]*$$,,'; \
+-  while test -n "$$dir1"; do \
+-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+-    if test "$$first" != "."; then \
+-      if test "$$first" = ".."; then \
+-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+-      else \
+-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+-        if test "$$first2" = "$$first"; then \
+-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+-        else \
+-          dir2="../$$dir2"; \
+-        fi; \
+-        dir0="$$dir0"/"$$first"; \
+-      fi; \
+-    fi; \
+-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+-  done; \
+-  reldir="$$dir2"
++  { test ! -d $(distdir) \
++    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
++         && rm -fr $(distdir); }; }
+ DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+ GZIP_ENV = --best
+ distuninstallcheck_listfiles = find . -type f -print
+@@ -224,6 +182,7 @@ VERSION = @VERSION@
+ VGCONF_ARCH_PRI = @VGCONF_ARCH_PRI@
+ VGCONF_ARCH_SEC = @VGCONF_ARCH_SEC@
+ VGCONF_OS = @VGCONF_OS@
++VGCONF_PLATFORM_ARM_ARCH = @VGCONF_PLATFORM_ARM_ARCH@
+ VGCONF_PLATFORM_PRI_CAPS = @VGCONF_PLATFORM_PRI_CAPS@
+ VGCONF_PLATFORM_SEC_CAPS = @VGCONF_PLATFORM_SEC_CAPS@
+ VGCONF_PLATVARIANT = @VGCONF_PLATVARIANT@
+@@ -362,10 +321,10 @@ AM_CFLAGS_PPC64_LINUX = @FLAG_M64@ $(AM_
+ AM_CCASFLAGS_PPC64_LINUX = $(AM_CPPFLAGS_PPC64_LINUX) @FLAG_M64@ -g
+ AM_FLAG_M3264_ARM_LINUX = @FLAG_M32@
+ AM_CFLAGS_ARM_LINUX = @FLAG_M32@ @PREFERRED_STACK_BOUNDARY@ \
+-			 	$(AM_CFLAGS_BASE) -marm -mcpu=cortex-a8
++			 	$(AM_CFLAGS_BASE) @VGCONF_PLATFORM_ARM_ARCH@
+ 
+ AM_CCASFLAGS_ARM_LINUX = $(AM_CPPFLAGS_ARM_LINUX) @FLAG_M32@ \
+-				-marm -mcpu=cortex-a8 -g
++				@VGCONF_PLATFORM_ARM_ARCH@ -g
+ 
+ AM_FLAG_M3264_X86_DARWIN = -arch i386
+ AM_CFLAGS_X86_DARWIN = $(WERROR) -arch i386 $(AM_CFLAGS_BASE) \
+@@ -500,15 +459,15 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_
+ 	@for dep in $?; do \
+ 	  case '$(am__configure_deps)' in \
+ 	    *$$dep*) \
+-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
++	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
++	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+ 		&& exit 0; \
+ 	      exit 1;; \
+ 	  esac; \
+ 	done; \
+-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+-	$(am__cd) $(top_srcdir) && \
+-	  $(AUTOMAKE) --foreign Makefile
++	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
++	cd $(top_srcdir) && \
++	  $(AUTOMAKE) --foreign  Makefile
+ .PRECIOUS: Makefile
+ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ 	@case '$?' in \
+@@ -524,10 +483,9 @@ $(top_builddir)/config.status: $(top_src
+ 	$(SHELL) ./config.status --recheck
+ 
+ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+-	$(am__cd) $(srcdir) && $(AUTOCONF)
++	cd $(srcdir) && $(AUTOCONF)
+ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+-$(am__aclocal_m4_deps):
++	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+ 
+ config.h: stamp-h1
+ 	@if test ! -f $@; then \
+@@ -539,7 +497,7 @@ stamp-h1: $(srcdir)/config.h.in $(top_bu
+ 	@rm -f stamp-h1
+ 	cd $(top_builddir) && $(SHELL) ./config.status config.h
+ $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
+-	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
++	cd $(top_srcdir) && $(AUTOHEADER)
+ 	rm -f stamp-h1
+ 	touch $@
+ 
+@@ -556,63 +514,54 @@ drd/scripts/download-and-build-splash2:
+ install-pkgconfigDATA: $(pkgconfig_DATA)
+ 	@$(NORMAL_INSTALL)
+ 	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+-	for p in $$list; do \
++	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+ 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+-	  echo "$$d$$p"; \
+-	done | $(am__base_list) | \
+-	while read files; do \
+-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
++	  f=$(am__strip_dir) \
++	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
++	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+ 	done
+ 
+ uninstall-pkgconfigDATA:
+ 	@$(NORMAL_UNINSTALL)
+-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+-	test -n "$$files" || exit 0; \
+-	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+-	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
++	@list='$(pkgconfig_DATA)'; for p in $$list; do \
++	  f=$(am__strip_dir) \
++	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
++	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
++	done
+ install-pkglibDATA: $(pkglib_DATA)
+ 	@$(NORMAL_INSTALL)
+ 	test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)"
+-	@list='$(pkglib_DATA)'; test -n "$(pkglibdir)" || list=; \
+-	for p in $$list; do \
++	@list='$(pkglib_DATA)'; for p in $$list; do \
+ 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+-	  echo "$$d$$p"; \
+-	done | $(am__base_list) | \
+-	while read files; do \
+-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkglibdir)'"; \
+-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkglibdir)" || exit $$?; \
++	  f=$(am__strip_dir) \
++	  echo " $(pkglibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
++	  $(pkglibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
+ 	done
+ 
+ uninstall-pkglibDATA:
+ 	@$(NORMAL_UNINSTALL)
+-	@list='$(pkglib_DATA)'; test -n "$(pkglibdir)" || list=; \
+-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+-	test -n "$$files" || exit 0; \
+-	echo " ( cd '$(DESTDIR)$(pkglibdir)' && rm -f" $$files ")"; \
+-	cd "$(DESTDIR)$(pkglibdir)" && rm -f $$files
++	@list='$(pkglib_DATA)'; for p in $$list; do \
++	  f=$(am__strip_dir) \
++	  echo " rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \
++	  rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \
++	done
+ install-pkgincludeHEADERS: $(pkginclude_HEADERS)
+ 	@$(NORMAL_INSTALL)
+ 	test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)"
+-	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+-	for p in $$list; do \
++	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
+ 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+-	  echo "$$d$$p"; \
+-	done | $(am__base_list) | \
+-	while read files; do \
+-	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
+-	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
++	  f=$(am__strip_dir) \
++	  echo " $(pkgincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgincludedir)/$$f'"; \
++	  $(pkgincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgincludedir)/$$f"; \
+ 	done
+ 
+ uninstall-pkgincludeHEADERS:
+ 	@$(NORMAL_UNINSTALL)
+-	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+-	test -n "$$files" || exit 0; \
+-	echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \
+-	cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files
++	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
++	  f=$(am__strip_dir) \
++	  echo " rm -f '$(DESTDIR)$(pkgincludedir)/$$f'"; \
++	  rm -f "$(DESTDIR)$(pkgincludedir)/$$f"; \
++	done
+ 
+ # This directory's subdirectories are mostly independent; you can cd
+ # into them and run `make' without going through this Makefile.
+@@ -638,7 +587,7 @@ $(RECURSIVE_TARGETS):
+ 	  else \
+ 	    local_target="$$target"; \
+ 	  fi; \
+-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
++	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ 	  || eval $$failcom; \
+ 	done; \
+ 	if test "$$dot_seen" = "no"; then \
+@@ -672,16 +621,16 @@ $(RECURSIVE_CLEAN_TARGETS):
+ 	  else \
+ 	    local_target="$$target"; \
+ 	  fi; \
+-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
++	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ 	  || eval $$failcom; \
+ 	done && test -z "$$fail"
+ tags-recursive:
+ 	list='$(SUBDIRS)'; for subdir in $$list; do \
+-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
++	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ 	done
+ ctags-recursive:
+ 	list='$(SUBDIRS)'; for subdir in $$list; do \
+-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
++	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ 	done
+ 
+ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+@@ -696,7 +645,7 @@ tags: TAGS
+ 
+ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ 		$(TAGS_FILES) $(LISP)
+-	set x; \
++	tags=; \
+ 	here=`pwd`; \
+ 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ 	  include_option=--etags-include; \
+@@ -708,7 +657,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCE
+ 	list='$(SUBDIRS)'; for subdir in $$list; do \
+ 	  if test "$$subdir" = .; then :; else \
+ 	    test ! -f $$subdir/TAGS || \
+-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
++	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ 	  fi; \
+ 	done; \
+ 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+@@ -717,41 +666,36 @@ TAGS: tags-recursive $(HEADERS) $(SOURCE
+ 	  done | \
+ 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+-	shift; \
+-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
++	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ 	  test -n "$$unique" || unique=$$empty_fix; \
+-	  if test $$# -gt 0; then \
+-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+-	      "$$@" $$unique; \
+-	  else \
+-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+-	      $$unique; \
+-	  fi; \
++	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++	    $$tags $$unique; \
+ 	fi
+ ctags: CTAGS
+ CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ 		$(TAGS_FILES) $(LISP)
++	tags=; \
+ 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ 	unique=`for i in $$list; do \
+ 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ 	  done | \
+ 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+-	test -z "$(CTAGS_ARGS)$$unique" \
++	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+-	     $$unique
++	     $$tags $$unique
+ 
+ GTAGS:
+ 	here=`$(am__cd) $(top_builddir) && pwd` \
+-	  && $(am__cd) $(top_srcdir) \
+-	  && gtags -i $(GTAGS_ARGS) "$$here"
++	  && cd $(top_srcdir) \
++	  && gtags -i $(GTAGS_ARGS) $$here
+ 
+ distclean-tags:
+ 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ 
+ distdir: $(DISTFILES)
+ 	$(am__remove_distdir)
+-	test -d "$(distdir)" || mkdir "$(distdir)"
++	test -d $(distdir) || mkdir $(distdir)
+ 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ 	list='$(DISTFILES)'; \
+@@ -767,55 +711,39 @@ distdir: $(DISTFILES)
+ 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ 	  if test -d $$d/$$file; then \
+ 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+-	    if test -d "$(distdir)/$$file"; then \
+-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+-	    fi; \
+ 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ 	    fi; \
+-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
++	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ 	  else \
+-	    test -f "$(distdir)/$$file" \
+-	    || cp -p $$d/$$file "$(distdir)/$$file" \
++	    test -f $(distdir)/$$file \
++	    || cp -p $$d/$$file $(distdir)/$$file \
+ 	    || exit 1; \
+ 	  fi; \
+ 	done
+-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
++	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ 	  if test "$$subdir" = .; then :; else \
+ 	    test -d "$(distdir)/$$subdir" \
+ 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+ 	    || exit 1; \
+-	  fi; \
+-	done
+-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+-	  if test "$$subdir" = .; then :; else \
+-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+-	    $(am__relativize); \
+-	    new_distdir=$$reldir; \
+-	    dir1=$$subdir; dir2="$(top_distdir)"; \
+-	    $(am__relativize); \
+-	    new_top_distdir=$$reldir; \
+-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+-	    ($(am__cd) $$subdir && \
++	    distdir=`$(am__cd) $(distdir) && pwd`; \
++	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
++	    (cd $$subdir && \
+ 	      $(MAKE) $(AM_MAKEFLAGS) \
+-	        top_distdir="$$new_top_distdir" \
+-	        distdir="$$new_distdir" \
++	        top_distdir="$$top_distdir" \
++	        distdir="$$distdir/$$subdir" \
+ 		am__remove_distdir=: \
+ 		am__skip_length_check=: \
+-		am__skip_mode_fix=: \
+ 	        distdir) \
+ 	      || exit 1; \
+ 	  fi; \
+ 	done
+-	-test -n "$(am__skip_mode_fix)" \
+-	|| find "$(distdir)" -type d ! -perm -755 \
++	-find "$(distdir)" -type d ! -perm -755 \
+ 		-exec chmod u+rwx,go+rx {} \; -o \
+ 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+-	|| chmod -R a+r "$(distdir)"
++	|| chmod -R a+r $(distdir)
+ dist-gzip: distdir
+ 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ 	$(am__remove_distdir)
+@@ -827,10 +755,6 @@ dist-lzma: distdir
+ 	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+ 	$(am__remove_distdir)
+ 
+-dist-xz: distdir
+-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+-	$(am__remove_distdir)
+-
+ dist-tarZ: distdir
+ 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ 	$(am__remove_distdir)
+@@ -855,29 +779,25 @@ dist dist-all: distdir
+ distcheck: dist
+ 	case '$(DIST_ARCHIVES)' in \
+ 	*.tar.gz*) \
+-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
++	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ 	*.tar.bz2*) \
+-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
++	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ 	*.tar.lzma*) \
+-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+-	*.tar.xz*) \
+-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
++	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+ 	*.tar.Z*) \
+ 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ 	*.shar.gz*) \
+-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
++	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ 	*.zip*) \
+ 	  unzip $(distdir).zip ;;\
+ 	esac
+-	chmod -R a-w $(distdir); chmod a+w $(distdir)
++	chmod -R a-w $(distdir); chmod u+w $(distdir)
+ 	mkdir $(distdir)/_build
+ 	mkdir $(distdir)/_inst
+ 	chmod a-w $(distdir)
+-	test -d $(distdir)/_build || exit 0; \
+ 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+-	  && am__cwd=`pwd` \
+-	  && $(am__cd) $(distdir)/_build \
++	  && cd $(distdir)/_build \
+ 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+ 	  && $(MAKE) $(AM_MAKEFLAGS) \
+@@ -899,15 +819,13 @@ distcheck: dist
+ 	  && rm -rf "$$dc_destdir" \
+ 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+ 	  && rm -rf $(DIST_ARCHIVES) \
+-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+-	  && cd "$$am__cwd" \
+-	  || exit 1
++	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ 	$(am__remove_distdir)
+ 	@(echo "$(distdir) archives ready for distribution: "; \
+ 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+ distuninstallcheck:
+-	@$(am__cd) '$(distuninstallcheck_dir)' \
++	@cd $(distuninstallcheck_dir) \
+ 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ 	   || { echo "ERROR: files left after uninstall:" ; \
+ 	        if test -n "$(DESTDIR)"; then \
+@@ -955,7 +873,6 @@ clean-generic:
+ 
+ distclean-generic:
+ 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ 
+ maintainer-clean-generic:
+ 	@echo "This command is intended for maintainers to use"
+@@ -1031,15 +948,14 @@ ps-am:
+ uninstall-am: uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS \
+ 	uninstall-pkglibDATA
+ 
+-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
+-	ctags-recursive install install-am install-strip \
+-	tags-recursive
++.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
++	install-strip
+ 
+ .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ 	all all-am all-local am--refresh check check-am clean \
+ 	clean-generic clean-local ctags ctags-recursive dist dist-all \
+-	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \
+-	dist-zip distcheck distclean distclean-generic distclean-hdr \
++	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-zip \
++	distcheck distclean distclean-generic distclean-hdr \
+ 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ 	dvi-am html html-am info info-am install install-am \
+ 	install-data install-data-am install-dvi install-dvi-am \
+@@ -1146,7 +1062,6 @@ all-local: default.supp
+ 
+ clean-local:
+ 	rm -rf $(inplacedir)
+-
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+ .NOEXPORT: