make allmodconfig work for alix1c eglibc

many upstream package updates,
squid, php, asterisk, gnutls, nmap, sqlite, dhcp, git

1 files changed, 500 insertions, 10 deletions

diff --git a/package/libnet/patches/patch-install-sh b/package/libnet/patches/patch-install-sh
index 9720e708e..3bec8bc67 100644
--- a/package/libnet/patches/patch-install-sh
+++ b/package/libnet/patches/patch-install-sh
@@ -1,11 +1,501 @@
 --- Libnet-1.0.2a.orig/install-sh	2001-02-05 18:51:48.000000000 +0100
-+++ Libnet-1.0.2a/install-sh	2009-06-12 21:48:27.000000000 +0200
-@@ -44,7 +44,7 @@ mkdirprog="${MKDIRPROG-mkdir}"
- transformbasename=""
- transform_arg=""
- instcmd="$cpprog"
--chmodcmd="$chmodprog 0755"
-+chmodcmd=""
- chowncmd=""
- chgrpcmd=""
- stripcmd=""
++++ Libnet-1.0.2a/install-sh	2009-08-23 00:39:58.189621602 +0200
+@@ -1,19 +1,38 @@
+-#! /bin/sh
+-#
++#!/bin/sh
+ # install - install a program, script, or datafile
+-# This comes from X11R5 (mit/util/scripts/install.sh).
++
++scriptversion=2004-04-01.17
++
++# This originates from X11R5 (mit/util/scripts/install.sh), which was
++# later released in X11R6 (xc/config/util/install.sh) with the
++# following copyright and license.
+ #
+-# Copyright 1991 by the Massachusetts Institute of Technology
++# Copyright (C) 1994 X Consortium
+ #
+-# Permission to use, copy, modify, distribute, and sell this software and its
+-# documentation for any purpose is hereby granted without fee, provided that
+-# the above copyright notice appear in all copies and that both that
+-# copyright notice and this permission notice appear in supporting
+-# documentation, and that the name of M.I.T. not be used in advertising or
+-# publicity pertaining to distribution of the software without specific,
+-# written prior permission.  M.I.T. makes no representations about the
+-# suitability of this software for any purpose.  It is provided "as is"
+-# without express or implied warranty.
++# Permission is hereby granted, free of charge, to any person obtaining a copy
++# of this software and associated documentation files (the "Software"), to
++# deal in the Software without restriction, including without limitation the
++# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++# sell copies of the Software, and to permit persons to whom the Software is
++# furnished to do so, subject to the following conditions:
++#
++# The above copyright notice and this permission notice shall be included in
++# all copies or substantial portions of the Software.
++#
++# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
++# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++#
++# Except as contained in this notice, the name of the X Consortium shall not
++# be used in advertising or otherwise to promote the sale, use or other deal-
++# ings in this Software without prior written authorization from the X Consor-
++# tium.
++#
++#
++# FSF changes to this file are in the public domain.
+ #
+ # Calling this script install-sh is preferred over install.sh, to prevent
+ # `make' implicit rules from creating a file called install from it
+@@ -23,13 +42,11 @@
+ # from scratch.  It can only install one file at a time, a restriction
+ # shared with many OS's install programs.
+ 
+-
+ # set DOITPROG to echo to test this script
+ 
+ # Don't use :- since 4.3BSD and earlier shells don't like it.
+ doit="${DOITPROG-}"
+ 
+-
+ # put in absolute paths if you don't have them in your path; or use env. vars.
+ 
+ mvprog="${MVPROG-mv}"
+@@ -41,210 +58,268 @@ stripprog="${STRIPPROG-strip}"
+ rmprog="${RMPROG-rm}"
+ mkdirprog="${MKDIRPROG-mkdir}"
+ 
+-transformbasename=""
+-transform_arg=""
+-instcmd="$cpprog"
++transformbasename=
++transform_arg=
++instcmd="$mvprog"
+ chmodcmd="$chmodprog 0755"
+-chowncmd=""
+-chgrpcmd=""
+-stripcmd=""
++chowncmd=
++chgrpcmd=
++stripcmd=
+ rmcmd="$rmprog -f"
+ mvcmd="$mvprog"
+-src=""
+-dst=""
+-dir_arg=""
+-
+-while [ x"$1" != x ]; do
+-    case $1 in
+-	-c) instcmd="$cpprog"
+-	    shift
+-	    continue;;
+-
+-	-d) dir_arg=true
+-	    shift
+-	    continue;;
++src=
++dst=
++dir_arg=
+ 
+-	-m) chmodcmd="$chmodprog $2"
+-	    shift
+-	    shift
+-	    continue;;
++usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
++   or: $0 [OPTION]... SRCFILES... DIRECTORY
++   or: $0 -d DIRECTORIES...
+ 
+-	-o) chowncmd="$chownprog $2"
+-	    shift
+-	    shift
+-	    continue;;
++In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
++In the second, create the directory path DIR.
+ 
+-	-g) chgrpcmd="$chgrpprog $2"
+-	    shift
+-	    shift
+-	    continue;;
++Options:
++-b=TRANSFORMBASENAME
++-c         copy source (using $cpprog) instead of moving (using $mvprog).
++-d         create directories instead of installing files.
++-g GROUP   $chgrp installed files to GROUP.
++-m MODE    $chmod installed files to MODE.
++-o USER    $chown installed files to USER.
++-s         strip installed files (using $stripprog).
++-t=TRANSFORM
++--help     display this help and exit.
++--version  display version info and exit.
+ 
+-	-s) stripcmd="$stripprog"
+-	    shift
+-	    continue;;
++Environment variables override the default commands:
++  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
++"
+ 
+-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+-	    shift
+-	    continue;;
++while test -n "$1"; do
++  case $1 in
++    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
++        shift
++        continue;;
+ 
+-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+-	    shift
+-	    continue;;
++    -c) instcmd=$cpprog
++        shift
++        continue;;
+ 
+-	*)  if [ x"$src" = x ]
+-	    then
+-		src=$1
+-	    else
+-		# this colon is to work around a 386BSD /bin/sh bug
+-		:
+-		dst=$1
+-	    fi
+-	    shift
+-	    continue;;
+-    esac
+-done
++    -d) dir_arg=true
++        shift
++        continue;;
+ 
+-if [ x"$src" = x ]
+-then
+-	echo "install:	no input file specified"
+-	exit 1
+-else
+-	true
+-fi
++    -g) chgrpcmd="$chgrpprog $2"
++        shift
++        shift
++        continue;;
+ 
+-if [ x"$dir_arg" != x ]; then
+-	dst=$src
+-	src=""
+-	
+-	if [ -d $dst ]; then
+-		instcmd=:
+-	else
+-		instcmd=mkdir
+-	fi
+-else
++    --help) echo "$usage"; exit 0;;
+ 
+-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+-# might cause directories to be created, which would be especially bad 
+-# if $src (and thus $dsttmp) contains '*'.
++    -m) chmodcmd="$chmodprog $2"
++        shift
++        shift
++        continue;;
+ 
+-	if [ -f $src -o -d $src ]
+-	then
+-		true
+-	else
+-		echo "install:  $src does not exist"
+-		exit 1
+-	fi
+-	
+-	if [ x"$dst" = x ]
+-	then
+-		echo "install:	no destination specified"
+-		exit 1
+-	else
+-		true
+-	fi
++    -o) chowncmd="$chownprog $2"
++        shift
++        shift
++        continue;;
+ 
+-# If destination is a directory, append the input filename; if your system
+-# does not like double slashes in filenames, you may need to add some logic
++    -s) stripcmd=$stripprog
++        shift
++        continue;;
+ 
+-	if [ -d $dst ]
+-	then
+-		dst="$dst"/`basename $src`
+-	else
+-		true
+-	fi
+-fi
++    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
++        shift
++        continue;;
+ 
+-## this sed command emulates the dirname command
+-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
++    --version) echo "$0 $scriptversion"; exit 0;;
+ 
+-# Make sure that the destination directory exists.
+-#  this part is taken from Noah Friedman's mkinstalldirs script
++    *)  # When -d is used, all remaining arguments are directories to create.
++	test -n "$dir_arg" && break
++        # Otherwise, the last argument is the destination.  Remove it from $@.
++	for arg
++	do
++          if test -n "$dstarg"; then
++	    # $@ is not empty: it contains at least $arg.
++	    set fnord "$@" "$dstarg"
++	    shift # fnord
++	  fi
++	  shift # arg
++	  dstarg=$arg
++	done
++	break;;
++  esac
++done
+ 
+-# Skip lots of stat calls in the usual case.
+-if [ ! -d "$dstdir" ]; then
+-defaultIFS='	
+-'
+-IFS="${IFS-${defaultIFS}}"
++if test -z "$1"; then
++  if test -z "$dir_arg"; then
++    echo "$0: no input file specified." >&2
++    exit 1
++  fi
++  # It's OK to call `install-sh -d' without argument.
++  # This can happen when creating conditional directories.
++  exit 0
++fi
+ 
+-oIFS="${IFS}"
+-# Some sh's can't handle IFS=/ for some reason.
+-IFS='%'
+-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+-IFS="${oIFS}"
++for src
++do
++  # Protect names starting with `-'.
++  case $src in
++    -*) src=./$src ;;
++  esac
+ 
+-pathcomp=''
++  if test -n "$dir_arg"; then
++    dst=$src
++    src=
+ 
+-while [ $# -ne 0 ] ; do
+-	pathcomp="${pathcomp}${1}"
+-	shift
++    if test -d "$dst"; then
++      instcmd=:
++      chmodcmd=
++    else
++      instcmd=$mkdirprog
++    fi
++  else
++    # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
++    # might cause directories to be created, which would be especially bad
++    # if $src (and thus $dsttmp) contains '*'.
++    if test ! -f "$src" && test ! -d "$src"; then
++      echo "$0: $src does not exist." >&2
++      exit 1
++    fi
+ 
+-	if [ ! -d "${pathcomp}" ] ;
+-        then
+-		$mkdirprog "${pathcomp}"
+-	else
+-		true
+-	fi
++    if test -z "$dstarg"; then
++      echo "$0: no destination specified." >&2
++      exit 1
++    fi
+ 
+-	pathcomp="${pathcomp}/"
+-done
+-fi
++    dst=$dstarg
++    # Protect names starting with `-'.
++    case $dst in
++      -*) dst=./$dst ;;
++    esac
+ 
+-if [ x"$dir_arg" != x ]
+-then
+-	$doit $instcmd $dst &&
++    # If destination is a directory, append the input filename; won't work
++    # if double slashes aren't ignored.
++    if test -d "$dst"; then
++      dst=$dst/`basename "$src"`
++    fi
++  fi
+ 
+-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+-else
++  # This sed command emulates the dirname command.
++  dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+ 
+-# If we're going to rename the final executable, determine the name now.
++  # Make sure that the destination directory exists.
+ 
+-	if [ x"$transformarg" = x ] 
+-	then
+-		dstfile=`basename $dst`
+-	else
+-		dstfile=`basename $dst $transformbasename | 
+-			sed $transformarg`$transformbasename
+-	fi
++  # Skip lots of stat calls in the usual case.
++  if test ! -d "$dstdir"; then
++    defaultIFS='
++	 '
++    IFS="${IFS-$defaultIFS}"
+ 
+-# don't allow the sed command to completely eliminate the filename
++    oIFS=$IFS
++    # Some sh's can't handle IFS=/ for some reason.
++    IFS='%'
++    set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
++    IFS=$oIFS
+ 
+-	if [ x"$dstfile" = x ] 
+-	then
+-		dstfile=`basename $dst`
+-	else
+-		true
+-	fi
++    pathcomp=
+ 
+-# Make a temp file name in the proper directory.
++    while test $# -ne 0 ; do
++      pathcomp=$pathcomp$1
++      shift
++      if test ! -d "$pathcomp"; then
++        $mkdirprog "$pathcomp" || lasterr=$?
++	# mkdir can fail with a `File exist' error in case several
++	# install-sh are creating the directory concurrently.  This
++	# is OK.
++	test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
++      fi
++      pathcomp=$pathcomp/
++    done
++  fi
+ 
+-	dsttmp=$dstdir/#inst.$$#
++  if test -n "$dir_arg"; then
++    $doit $instcmd "$dst" \
++      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
++      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
++      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
++      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+ 
+-# Move or copy the file name to the temp name
++  else
++    # If we're going to rename the final executable, determine the name now.
++    if test -z "$transformarg"; then
++      dstfile=`basename "$dst"`
++    else
++      dstfile=`basename "$dst" $transformbasename \
++               | sed $transformarg`$transformbasename
++    fi
+ 
+-	$doit $instcmd $src $dsttmp &&
++    # don't allow the sed command to completely eliminate the filename.
++    test -z "$dstfile" && dstfile=`basename "$dst"`
+ 
+-	trap "rm -f ${dsttmp}" 0 &&
++    # Make a couple of temp file names in the proper directory.
++    dsttmp=$dstdir/_inst.$$_
++    rmtmp=$dstdir/_rm.$$_
+ 
+-# and set any options; do chmod last to preserve setuid bits
++    # Trap to clean up those temp files at exit.
++    trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
++    trap '(exit $?); exit' 1 2 13 15
+ 
+-# If any of these fail, we abort the whole thing.  If we want to
+-# ignore errors from any of these, just make sure not to ignore
+-# errors from the above "$doit $instcmd $src $dsttmp" command.
++    # Move or copy the file name to the temp name
++    $doit $instcmd "$src" "$dsttmp" &&
+ 
+-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
++    # and set any options; do chmod last to preserve setuid bits.
++    #
++    # If any of these fail, we abort the whole thing.  If we want to
++    # ignore errors from any of these, just make sure not to ignore
++    # errors from the above "$doit $instcmd $src $dsttmp" command.
++    #
++    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
++      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
++      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
++      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+ 
+-# Now rename the file to the real destination.
++    # Now rename the file to the real destination.
++    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
++      || {
++	   # The rename failed, perhaps because mv can't rename something else
++	   # to itself, or perhaps because mv is so ancient that it does not
++	   # support -f.
+ 
+-	$doit $rmcmd -f $dstdir/$dstfile &&
+-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
++	   # Now remove or move aside any old file at destination location.
++	   # We try this two ways since rm can't unlink itself on some
++	   # systems and the destination file might be busy for other
++	   # reasons.  In this case, the final cleanup might fail but the new
++	   # file should still install successfully.
++	   {
++	     if test -f "$dstdir/$dstfile"; then
++	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
++	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
++	       || {
++		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
++		 (exit 1); exit
++	       }
++	     else
++	       :
++	     fi
++	   } &&
+ 
+-fi &&
++	   # Now rename the file to the real destination.
++	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
++	 }
++    }
++  fi || { (exit 1); exit; }
++done
+ 
++# The final little trick to "correctly" pass the exit status to the exit trap.
++{
++  (exit 0); exit
++}
+ 
+-exit 0
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End: