hopefully fix my autotool regeneration patches

14 files changed, 166 insertions, 909 deletions

diff --git a/package/cryptsetup/patches/patch-INSTALL b/package/cryptsetup/patches/patch-INSTALL
deleted file mode 100644
index 9fbf51b65..000000000
--- a/package/cryptsetup/patches/patch-INSTALL
+++ /dev/null
@@ -1,345 +0,0 @@
---- cryptsetup-1.1.0.orig/INSTALL	2009-07-06 18:53:08.000000000 +0200
-+++ cryptsetup-1.1.0/INSTALL	2010-02-14 18:24:56.000000000 +0100
-@@ -1,13 +1,25 @@
--Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
--Foundation, Inc.
-+Installation Instructions
-+*************************
- 
--   This file is free documentation; the Free Software Foundation gives
--unlimited permission to copy, distribute and modify it.
-+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-+
-+   Copying and distribution of this file, with or without modification,
-+are permitted in any medium without royalty provided the copyright
-+notice and this notice are preserved.  This file is offered as-is,
-+without warranty of any kind.
- 
- Basic Installation
- ==================
- 
--   These are generic installation instructions.
-+   Briefly, the shell commands `./configure; make; make install' should
-+configure, build, and install this package.  The following
-+more-detailed instructions are generic; see the `README' file for
-+instructions specific to this package.  Some packages provide this
-+`INSTALL' file but do not implement all of the features documented
-+below.  The lack of an optional feature in a given package is not
-+necessarily a bug.  More recommendations for GNU packages can be found
-+in *note Makefile Conventions: (standards)Makefile Conventions.
- 
-    The `configure' shell script attempts to guess correct values for
- various system-dependent variables used during compilation.  It uses
-@@ -20,9 +32,9 @@ debugging `configure').
- 
-    It can also use an optional file (typically called `config.cache'
- and enabled with `--cache-file=config.cache' or simply `-C') that saves
--the results of its tests to speed up reconfiguring.  (Caching is
-+the results of its tests to speed up reconfiguring.  Caching is
- disabled by default to prevent problems with accidental use of stale
--cache files.)
-+cache files.
- 
-    If you need to do unusual things to compile the package, please try
- to figure out how `configure' could check whether to do them, and mail
-@@ -32,30 +44,37 @@ some point `config.cache' contains resul
- may remove or edit it.
- 
-    The file `configure.ac' (or `configure.in') is used to create
--`configure' by a program called `autoconf'.  You only need
--`configure.ac' if you want to change it or regenerate `configure' using
--a newer version of `autoconf'.
-+`configure' by a program called `autoconf'.  You need `configure.ac' if
-+you want to change it or regenerate `configure' using a newer version
-+of `autoconf'.
- 
--The simplest way to compile this package is:
-+   The simplest way to compile this package is:
- 
-   1. `cd' to the directory containing the package's source code and type
--     `./configure' to configure the package for your system.  If you're
--     using `csh' on an old version of System V, you might need to type
--     `sh ./configure' instead to prevent `csh' from trying to execute
--     `configure' itself.
-+     `./configure' to configure the package for your system.
- 
--     Running `configure' takes awhile.  While running, it prints some
--     messages telling which features it is checking for.
-+     Running `configure' might take a while.  While running, it prints
-+     some messages telling which features it is checking for.
- 
-   2. Type `make' to compile the package.
- 
-   3. Optionally, type `make check' to run any self-tests that come with
--     the package.
-+     the package, generally using the just-built uninstalled binaries.
- 
-   4. Type `make install' to install the programs and any data files and
--     documentation.
-+     documentation.  When installing into a prefix owned by root, it is
-+     recommended that the package be configured and built as a regular
-+     user, and only the `make install' phase executed with root
-+     privileges.
- 
--  5. You can remove the program binaries and object files from the
-+  5. Optionally, type `make installcheck' to repeat any self-tests, but
-+     this time using the binaries in their final installed location.
-+     This target does not install anything.  Running this target as a
-+     regular user, particularly if the prior `make install' required
-+     root privileges, verifies that the installation completed
-+     correctly.
-+
-+  6. You can remove the program binaries and object files from the
-      source code directory by typing `make clean'.  To also remove the
-      files that `configure' created (so you can compile the package for
-      a different kind of computer), type `make distclean'.  There is
-@@ -64,6 +83,16 @@ The simplest way to compile this package
-      all sorts of other programs in order to regenerate files that came
-      with the distribution.
- 
-+  7. Often, you can also type `make uninstall' to remove the installed
-+     files again.  In practice, not all packages have tested that
-+     uninstallation works correctly, even though it is required by the
-+     GNU Coding Standards.
-+
-+  8. Some packages, particularly those that use Automake, provide `make
-+     distcheck', which can by used by developers to test that all other
-+     targets like `make install' and `make uninstall' work correctly.
-+     This target is generally not run by end users.
-+
- Compilers and Options
- =====================
- 
-@@ -75,7 +104,7 @@ for details on some of the pertinent env
- by setting variables in the command line or in the environment.  Here
- is an example:
- 
--     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
- 
-    *Note Defining Variables::, for more details.
- 
-@@ -84,44 +113,89 @@ Compiling For Multiple Architectures
- 
-    You can compile the package for more than one kind of computer at the
- same time, by placing the object files for each architecture in their
--own directory.  To do this, you must use a version of `make' that
--supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-+own directory.  To do this, you can use GNU `make'.  `cd' to the
- directory where you want the object files and executables to go and run
- the `configure' script.  `configure' automatically checks for the
--source code in the directory that `configure' is in and in `..'.
-+source code in the directory that `configure' is in and in `..'.  This
-+is known as a "VPATH" build.
- 
--   If you have to use a `make' that does not support the `VPATH'
--variable, you have to compile the package for one architecture at a
--time in the source code directory.  After you have installed the
--package for one architecture, use `make distclean' before reconfiguring
--for another architecture.
-+   With a non-GNU `make', it is safer to compile the package for one
-+architecture at a time in the source code directory.  After you have
-+installed the package for one architecture, use `make distclean' before
-+reconfiguring for another architecture.
-+
-+   On MacOS X 10.5 and later systems, you can create libraries and
-+executables that work on multiple system types--known as "fat" or
-+"universal" binaries--by specifying multiple `-arch' options to the
-+compiler but only a single `-arch' option to the preprocessor.  Like
-+this:
-+
-+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-+                 CPP="gcc -E" CXXCPP="g++ -E"
-+
-+   This is not guaranteed to produce working output in all cases, you
-+may have to build one architecture at a time and combine the results
-+using the `lipo' tool if you have problems.
- 
- Installation Names
- ==================
- 
--   By default, `make install' will install the package's files in
--`/usr/local/bin', `/usr/local/man', etc.  You can specify an
--installation prefix other than `/usr/local' by giving `configure' the
--option `--prefix=PATH'.
-+   By default, `make install' installs the package's commands under
-+`/usr/local/bin', include files under `/usr/local/include', etc.  You
-+can specify an installation prefix other than `/usr/local' by giving
-+`configure' the option `--prefix=PREFIX', where PREFIX must be an
-+absolute file name.
- 
-    You can specify separate installation prefixes for
- architecture-specific files and architecture-independent files.  If you
--give `configure' the option `--exec-prefix=PATH', the package will use
--PATH as the prefix for installing programs and libraries.
--Documentation and other data files will still use the regular prefix.
-+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-+PREFIX as the prefix for installing programs and libraries.
-+Documentation and other data files still use the regular prefix.
- 
-    In addition, if you use an unusual directory layout you can give
--options like `--bindir=PATH' to specify different values for particular
-+options like `--bindir=DIR' to specify different values for particular
- kinds of files.  Run `configure --help' for a list of the directories
--you can set and what kinds of files go in them.
-+you can set and what kinds of files go in them.  In general, the
-+default for these options is expressed in terms of `${prefix}', so that
-+specifying just `--prefix' will affect all of the other directory
-+specifications that were not explicitly provided.
- 
--   If the package supports it, you can cause programs to be installed
--with an extra prefix or suffix on their names by giving `configure' the
--option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-+   The most portable way to affect installation locations is to pass the
-+correct locations to `configure'; however, many packages provide one or
-+both of the following shortcuts of passing variable assignments to the
-+`make install' command line to change installation locations without
-+having to reconfigure or recompile.
-+
-+   The first method involves providing an override variable for each
-+affected directory.  For example, `make install
-+prefix=/alternate/directory' will choose an alternate location for all
-+directory configuration variables that were expressed in terms of
-+`${prefix}'.  Any directories that were specified during `configure',
-+but not in terms of `${prefix}', must each be overridden at install
-+time for the entire installation to be relocated.  The approach of
-+makefile variable overrides for each directory variable is required by
-+the GNU Coding Standards, and ideally causes no recompilation.
-+However, some platforms have known limitations with the semantics of
-+shared libraries that end up requiring recompilation when using this
-+method, particularly noticeable in packages that use GNU Libtool.
-+
-+   The second method involves providing the `DESTDIR' variable.  For
-+example, `make install DESTDIR=/alternate/directory' will prepend
-+`/alternate/directory' before all installation names.  The approach of
-+`DESTDIR' overrides is not required by the GNU Coding Standards, and
-+does not work on platforms that have drive letters.  On the other hand,
-+it does better at avoiding recompilation issues, and works well even
-+when some directory options were not specified in terms of `${prefix}'
-+at `configure' time.
- 
- Optional Features
- =================
- 
-+   If the package supports it, you can cause programs to be installed
-+with an extra prefix or suffix on their names by giving `configure' the
-+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-+
-    Some packages pay attention to `--enable-FEATURE' options to
- `configure', where FEATURE indicates an optional part of the package.
- They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-@@ -134,6 +208,45 @@ find the X include and library files aut
- you can use the `configure' options `--x-includes=DIR' and
- `--x-libraries=DIR' to specify their locations.
- 
-+   Some packages offer the ability to configure how verbose the
-+execution of `make' will be.  For these packages, running `./configure
-+--enable-silent-rules' sets the default to minimal output, which can be
-+overridden with `make V=1'; while running `./configure
-+--disable-silent-rules' sets the default to verbose, which can be
-+overridden with `make V=0'.
-+
-+Particular systems
-+==================
-+
-+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-+CC is not installed, it is recommended to use the following options in
-+order to use an ANSI C compiler:
-+
-+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-+
-+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-+
-+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-+a workaround.  If GNU CC is not installed, it is therefore recommended
-+to try
-+
-+     ./configure CC="cc"
-+
-+and if that doesn't work, try
-+
-+     ./configure CC="cc -nodtk"
-+
-+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
-+directory contains several dysfunctional programs; working variants of
-+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-+in your `PATH', put it _after_ `/usr/bin'.
-+
-+   On Haiku, software installed for all users goes in `/boot/common',
-+not `/usr/local'.  It is recommended to use the following options:
-+
-+     ./configure --prefix=/boot/common
-+
- Specifying the System Type
- ==========================
- 
-@@ -149,14 +262,15 @@ type, such as `sun4', or a canonical nam
- 
- where SYSTEM can have one of these forms:
- 
--     OS KERNEL-OS
-+     OS
-+     KERNEL-OS
- 
-    See the file `config.sub' for the possible values of each field.  If
- `config.sub' isn't included in this package, then this package doesn't
- need to know the machine type.
- 
-    If you are _building_ compiler tools for cross-compiling, you should
--use the `--target=TYPE' option to select the type of system they will
-+use the option `--target=TYPE' to select the type of system they will
- produce code for.
- 
-    If you want to _use_ a cross compiler, that generates code for a
-@@ -186,9 +300,14 @@ them in the `configure' command line, us
- 
-      ./configure CC=/usr/local2/bin/gcc
- 
--will cause the specified gcc to be used as the C compiler (unless it is
-+causes the specified `gcc' to be used as the C compiler (unless it is
- overridden in the site shell script).
- 
-+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-+an Autoconf bug.  Until the bug is fixed you can use this workaround:
-+
-+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-+
- `configure' Invocation
- ======================
- 
-@@ -197,7 +316,14 @@ operates.
- 
- `--help'
- `-h'
--     Print a summary of the options to `configure', and exit.
-+     Print a summary of all of the options to `configure', and exit.
-+
-+`--help=short'
-+`--help=recursive'
-+     Print a summary of the options unique to this package's
-+     `configure', and exit.  The `short' variant lists options used
-+     only in the top level, while the `recursive' variant lists options
-+     also present in any nested packages.
- 
- `--version'
- `-V'
-@@ -224,6 +350,16 @@ operates.
-      Look for the package's source code in directory DIR.  Usually
-      `configure' can determine that directory automatically.
- 
-+`--prefix=DIR'
-+     Use DIR as the installation prefix.  *note Installation Names::
-+     for more details, including other options available for fine-tuning
-+     the installation locations.
-+
-+`--no-create'
-+`-n'
-+     Run the configure checks, but stop before creating any output
-+     files.
-+
- `configure' also accepts some other, not widely useful, options.  Run
- `configure --help' for more details.
- 
diff --git a/package/cryptsetup/patches/patch-Makefile_in b/package/cryptsetup/patches/patch-Makefile_in
index 0bc8b95e4..828b25c11 100644
--- a/package/cryptsetup/patches/patch-Makefile_in
+++ b/package/cryptsetup/patches/patch-Makefile_in
@@ -1,5 +1,5 @@
 --- cryptsetup-1.1.0.orig/Makefile.in	2010-01-17 11:29:23.000000000 +0100
-+++ cryptsetup-1.1.0/Makefile.in	2010-02-14 18:24:56.000000000 +0100
++++ cryptsetup-1.1.0/Makefile.in	2010-02-16 20:32:36.876861682 +0100
 @@ -1,4 +1,4 @@
 -# Makefile.in generated by automake 1.11 from Makefile.am.
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
diff --git a/package/cryptsetup/patches/patch-aclocal_m4 b/package/cryptsetup/patches/patch-aclocal_m4
index 7fd490cda..4d3ef4bff 100644
--- a/package/cryptsetup/patches/patch-aclocal_m4
+++ b/package/cryptsetup/patches/patch-aclocal_m4
@@ -1,5 +1,5 @@
 --- cryptsetup-1.1.0.orig/aclocal.m4	2010-01-17 11:29:20.000000000 +0100
-+++ cryptsetup-1.1.0/aclocal.m4	2010-02-14 18:24:56.000000000 +0100
++++ cryptsetup-1.1.0/aclocal.m4	2010-02-16 20:32:36.840860169 +0100
 @@ -1,4 +1,4 @@
 -# generated automatically by aclocal 1.11 -*- Autoconf -*-
 +# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
diff --git a/package/cryptsetup/patches/patch-compile b/package/cryptsetup/patches/patch-compile
deleted file mode 100644
index 1ff0e3e7f..000000000
--- a/package/cryptsetup/patches/patch-compile
+++ /dev/null
@@ -1,23 +0,0 @@
---- cryptsetup-1.1.0.orig/compile	2009-08-24 17:04:56.000000000 +0200
-+++ cryptsetup-1.1.0/compile	2010-02-14 18:24:56.000000000 +0100
-@@ -1,7 +1,7 @@
- #! /bin/sh
- # Wrapper for compilers which do not understand `-c -o'.
- 
--scriptversion=2009-04-28.21; # UTC
-+scriptversion=2009-10-06.20; # UTC
- 
- # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009  Free Software
- # Foundation, Inc.
-@@ -124,9 +124,9 @@ trap "rmdir '$lockdir'; exit 1" 1 2 15
- ret=$?
- 
- if test -f "$cofile"; then
--  mv "$cofile" "$ofile"
-+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
- elif test -f "${cofile}bj"; then
--  mv "${cofile}bj" "$ofile"
-+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
- fi
- 
- rmdir "$lockdir"
diff --git a/package/cryptsetup/patches/patch-config_guess b/package/cryptsetup/patches/patch-config_guess
deleted file mode 100644
index 1848f8087..000000000
--- a/package/cryptsetup/patches/patch-config_guess
+++ /dev/null
@@ -1,339 +0,0 @@
---- cryptsetup-1.1.0.orig/config.guess	2009-06-30 10:31:47.000000000 +0200
-+++ cryptsetup-1.1.0/config.guess	2010-02-14 18:24:56.000000000 +0100
-@@ -1,10 +1,10 @@
- #! /bin/sh
- # Attempt to guess a canonical system name.
- #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
--#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
- #   Free Software Foundation, Inc.
- 
--timestamp='2008-09-28'
-+timestamp='2009-06-10'
- 
- # This file is free software; you can redistribute it and/or modify it
- # under the terms of the GNU General Public License as published by
-@@ -139,23 +139,6 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` |
- UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
- UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
- 
--if [ "${UNAME_SYSTEM}" = "Linux" ] ; then
--	eval $set_cc_for_build
--	cat << EOF > $dummy.c
--	#include <features.h>
--	#ifdef __UCLIBC__
--	# ifdef __UCLIBC_CONFIG_VERSION__
--	LIBC=uclibc __UCLIBC_CONFIG_VERSION__
--	# else
--	LIBC=uclibc
--	# endif
--	#else
--	LIBC=gnu
--	#endif
--EOF
--	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep LIBC= | sed -e 's: ::g'`
--fi
--
- # Note: order is significant - the case branches are not exclusive.
- 
- case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-@@ -187,7 +170,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$
- 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- 		eval $set_cc_for_build
- 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
--			| grep __ELF__ >/dev/null
-+			| grep -q __ELF__
- 		then
- 		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- 		    # Return netbsd for either.  FIX?
-@@ -341,6 +324,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$
- 	case `/usr/bin/uname -p` in
- 	    sparc) echo sparc-icl-nx7; exit ;;
- 	esac ;;
-+    s390x:SunOS:*:*)
-+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	exit ;;
-     sun4H:SunOS:5.*:*)
- 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- 	exit ;;
-@@ -348,7 +334,20 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$
- 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- 	exit ;;
-     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
--	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-+	eval $set_cc_for_build
-+	SUN_ARCH="i386"
-+	# If there is a compiler, see if it is configured for 64-bit objects.
-+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
-+	# This test works for both compilers.
-+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-+		grep IS_64BIT_ARCH >/dev/null
-+	    then
-+		SUN_ARCH="x86_64"
-+	    fi
-+	fi
-+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- 	exit ;;
-     sun4*:SunOS:6*:*)
- 	# According to config.sub, this is the proper way to canonicalize
-@@ -657,7 +656,7 @@ EOF
- 	    # => hppa64-hp-hpux11.23
- 
- 	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
--		grep __LP64__ >/dev/null
-+		grep -q __LP64__
- 	    then
- 		HP_ARCH="hppa2.0w"
- 	    else
-@@ -823,6 +822,9 @@ EOF
-     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- 	echo i${UNAME_MACHINE}-pc-mks
- 	exit ;;
-+    8664:Windows_NT:*)
-+	echo x86_64-pc-mks
-+	exit ;;
-     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- 	# How do we know it's Interix rather than the generic POSIX subsystem?
- 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-@@ -857,66 +859,43 @@ EOF
- 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
- 	    | grep -q __ARM_EABI__
- 	then
--	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
- 	else
--	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
-+	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
- 	fi
- 	exit ;;
-     avr32*:Linux:*:*)
--	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
- 	exit ;;
-     cris:Linux:*:*)
--	echo cris-axis-linux-${LIBC}
-+	echo cris-axis-linux-gnu
- 	exit ;;
-     crisv32:Linux:*:*)
--	echo crisv32-axis-linux-${LIBC}
-+	echo crisv32-axis-linux-gnu
- 	exit ;;
-     frv:Linux:*:*)
--    	echo frv-unknown-linux-${LIBC}
-+    	echo frv-unknown-linux-gnu
- 	exit ;;
-     ia64:Linux:*:*)
--	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
- 	exit ;;
-     m32r*:Linux:*:*)
--	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
- 	exit ;;
-     m68*:Linux:*:*)
--	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
- 	exit ;;
--    mips:Linux:*:*)
--	eval $set_cc_for_build
--	sed 's/^	//' << EOF >$dummy.c
--	#undef CPU
--	#undef mips
--	#undef mipsel
--	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
--	CPU=mipsel
--	#else
--	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
--	CPU=mips
--	#else
--	CPU=
--	#endif
--	#endif
--EOF
--	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
--	    /^CPU/{
--		s: ::g
--		p
--	    }'`"
--	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
--	;;
--    mips64:Linux:*:*)
-+    mips:Linux:*:* | mips64:Linux:*:*)
- 	eval $set_cc_for_build
- 	sed 's/^	//' << EOF >$dummy.c
- 	#undef CPU
--	#undef mips64
--	#undef mips64el
-+	#undef ${UNAME_MACHINE}
-+	#undef ${UNAME_MACHINE}el
- 	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
--	CPU=mips64el
-+	CPU=${UNAME_MACHINE}el
- 	#else
- 	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
--	CPU=mips64
-+	CPU=${UNAME_MACHINE}
- 	#else
- 	CPU=
- 	#endif
-@@ -927,16 +906,16 @@ EOF
- 		s: ::g
- 		p
- 	    }'`"
--	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
-+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- 	;;
-     or32:Linux:*:*)
--	echo or32-unknown-linux-${LIBC}
-+	echo or32-unknown-linux-gnu
- 	exit ;;
-     ppc:Linux:*:*)
--	echo powerpc-unknown-linux-${LIBC}
-+	echo powerpc-unknown-linux-gnu
- 	exit ;;
-     ppc64:Linux:*:*)
--	echo powerpc64-unknown-linux-${LIBC}
-+	echo powerpc64-unknown-linux-gnu
- 	exit ;;
-     alpha:Linux:*:*)
- 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-@@ -948,9 +927,9 @@ EOF
- 	  EV67)  UNAME_MACHINE=alphaev67 ;;
- 	  EV68*) UNAME_MACHINE=alphaev68 ;;
-         esac
--	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
--	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
--	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+	objdump --private-headers /bin/sh | grep -q ld.so.1
-+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- 	exit ;;
-     padre:Linux:*:*)
- 	echo sparc-unknown-linux-gnu
-@@ -958,34 +937,34 @@ EOF
-     parisc:Linux:*:* | hppa:Linux:*:*)
- 	# Look for CPU level
- 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
--	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
--	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
--	  *)    echo hppa-unknown-linux-${LIBC} ;;
-+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-+	  *)    echo hppa-unknown-linux-gnu ;;
- 	esac
- 	exit ;;
-     parisc64:Linux:*:* | hppa64:Linux:*:*)
--	echo hppa64-unknown-linux-${LIBC}
-+	echo hppa64-unknown-linux-gnu
- 	exit ;;
-     s390:Linux:*:* | s390x:Linux:*:*)
- 	echo ${UNAME_MACHINE}-ibm-linux
- 	exit ;;
-     sh64*:Linux:*:*)
--    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
- 	exit ;;
-     sh*:Linux:*:*)
--	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
- 	exit ;;
-     sparc:Linux:*:* | sparc64:Linux:*:*)
--	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+	echo ${UNAME_MACHINE}-unknown-linux-gnu
- 	exit ;;
-     vax:Linux:*:*)
--	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
-+	echo ${UNAME_MACHINE}-dec-linux-gnu
- 	exit ;;
-     x86_64:Linux:*:*)
--	echo x86_64-unknown-linux-${LIBC}
-+	echo x86_64-unknown-linux-gnu
- 	exit ;;
-     xtensa*:Linux:*:*)
--    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
- 	exit ;;
-     i*86:Linux:*:*)
- 	# The BFD linker knows what the default object file format is, so
-@@ -1000,19 +979,9 @@ EOF
- 				    p'`
-         case "$ld_supported_targets" in
- 	  elf32-i386)
--		TENTATIVE="${UNAME_MACHINE}-pc-linux-${LIBC}"
-+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- 		;;
--	  a.out-i386-linux)
--		echo "${UNAME_MACHINE}-pc-linux-${LIBC}aout"
--		exit ;;
--	  "")
--		# Either a pre-BFD a.out linker (linux-gnuoldld) or
--		# one that does not give us useful --help.
--		echo "${UNAME_MACHINE}-pc-linux-${LIBC}oldld"
--		exit ;;
- 	esac
--	# This should get integrated into the C code below, but now we hack
--	if [ "$LIBC" != "gnu" ] ; then echo "$TENTATIVE" && exit 0 ; fi
- 	# Determine whether the default compiler is a.out or elf
- 	eval $set_cc_for_build
- 	sed 's/^	//' << EOF >$dummy.c
-@@ -1077,7 +1046,7 @@ EOF
-     i*86:syllable:*:*)
- 	echo ${UNAME_MACHINE}-pc-syllable
- 	exit ;;
--    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
- 	echo i386-unknown-lynxos${UNAME_RELEASE}
- 	exit ;;
-     i*86:*DOS:*:*)
-@@ -1121,8 +1090,11 @@ EOF
-     pc:*:*:*)
- 	# Left here for compatibility:
-         # uname -m prints for DJGPP always 'pc', but it prints nothing about
--        # the processor, so we play safe by assuming i386.
--	echo i386-pc-msdosdjgpp
-+        # the processor, so we play safe by assuming i586.
-+	# Note: whatever this is, it MUST be the same as what config.sub
-+	# prints for the "djgpp" host, or else GDB configury will decide that
-+	# this is a cross-build.
-+	echo i586-pc-msdosdjgpp
-         exit ;;
-     Intel:Mach:3*:*)
- 	echo i386-pc-mach3
-@@ -1160,6 +1132,16 @@ EOF
-     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-           && { echo i486-ncr-sysv4; exit; } ;;
-+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
-+	OS_REL='.3'
-+	test -r /etc/.relid \
-+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
-+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
-+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- 	echo m68k-unknown-lynxos${UNAME_RELEASE}
- 	exit ;;
-@@ -1172,7 +1154,7 @@ EOF
-     rs6000:LynxOS:2.*:*)
- 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
- 	exit ;;
--    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
-+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
- 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
- 	exit ;;
-     SM[BE]S:UNIX_SV:*:*)
-@@ -1346,6 +1328,9 @@ EOF
-     i*86:rdos:*:*)
- 	echo ${UNAME_MACHINE}-pc-rdos
- 	exit ;;
-+    i*86:AROS:*:*)
-+	echo ${UNAME_MACHINE}-pc-aros
-+	exit ;;
- esac
- 
- #echo '(No uname command or uname output not recognized.)' 1>&2
diff --git a/package/cryptsetup/patches/patch-config_sub b/package/cryptsetup/patches/patch-config_sub
deleted file mode 100644
index d159ebbfd..000000000
--- a/package/cryptsetup/patches/patch-config_sub
+++ /dev/null
@@ -1,169 +0,0 @@
---- cryptsetup-1.1.0.orig/config.sub	2009-06-30 10:31:47.000000000 +0200
-+++ cryptsetup-1.1.0/config.sub	2010-02-14 18:24:56.000000000 +0100
-@@ -1,10 +1,10 @@
- #! /bin/sh
- # Configuration validation subroutine script.
- #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
--#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
- #   Free Software Foundation, Inc.
- 
--timestamp='2008-09-08'
-+timestamp='2009-06-11'
- 
- # This file is (in principle) common to ALL GNU software.
- # The presence of a machine in this file suggests that SOME GNU software
-@@ -122,6 +122,7 @@ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-
- case $maybe_os in
-   nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-   uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
-+  kopensolaris*-gnu* | \
-   storm-chaos* | os2-emx* | rtmk-nova*)
-     os=-$maybe_os
-     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-@@ -152,6 +153,9 @@ case $os in
- 		os=
- 		basic_machine=$1
- 		;;
-+        -bluegene*)
-+	        os=-cnk
-+		;;
- 	-sim | -cisco | -oki | -wec | -winbond)
- 		os=
- 		basic_machine=$1
-@@ -244,11 +248,12 @@ case $basic_machine in
- 	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
- 	| bfin \
- 	| c4x | clipper \
--	| d10v | d30v | dlx | dsp16xx | dvp \
-+	| d10v | d30v | dlx | dsp16xx \
- 	| fido | fr30 | frv \
- 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- 	| i370 | i860 | i960 | ia64 \
- 	| ip2k | iq2000 \
-+	| lm32 \
- 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
- 	| maxq | mb | microblaze | mcore | mep | metag \
- 	| mips | mipsbe | mipseb | mipsel | mipsle \
-@@ -270,6 +275,7 @@ case $basic_machine in
- 	| mipsisa64sr71k | mipsisa64sr71kel \
- 	| mipstx39 | mipstx39el \
- 	| mn10200 | mn10300 \
-+	| moxie \
- 	| mt \
- 	| msp430 \
- 	| nios | nios2 \
-@@ -279,7 +285,7 @@ case $basic_machine in
- 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- 	| pyramid \
- 	| score \
--	| sh | sh[1234] | sh[24]a | sh[24]a*eb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
- 	| sh64 | sh64le \
- 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
- 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-@@ -331,6 +337,7 @@ case $basic_machine in
- 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- 	| i*86-* | i860-* | i960-* | ia64-* \
- 	| ip2k-* | iq2000-* \
-+	| lm32-* \
- 	| m32c-* | m32r-* | m32rle-* \
- 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- 	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
-@@ -362,7 +369,7 @@ case $basic_machine in
- 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- 	| pyramid-* \
- 	| romp-* | rs6000-* \
--	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]a*eb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
- 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
- 	| sparclite-* \
-@@ -443,6 +450,10 @@ case $basic_machine in
- 		basic_machine=m68k-apollo
- 		os=-bsd
- 		;;
-+	aros)
-+		basic_machine=i386-pc
-+		os=-aros
-+		;;
- 	aux)
- 		basic_machine=m68k-apple
- 		os=-aux
-@@ -459,6 +470,10 @@ case $basic_machine in
- 		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
- 		os=-linux
- 		;;
-+	bluegene*)
-+		basic_machine=powerpc-ibm
-+		os=-cnk
-+		;;
- 	c90)
- 		basic_machine=c90-cray
- 		os=-unicos
-@@ -726,24 +741,6 @@ case $basic_machine in
- 		basic_machine=m68k-atari
- 		os=-mint
- 		;;
--	mipsEE* | ee | ps2)
--		basic_machine=mips64r5900el-scei
--		case $os in
--		    -linux*)
--			;;
--		    *)
--			os=-elf
--			;;
--		esac
--		;;
--	iop)
--		basic_machine=mipsel-scei
--		os=-irx
--		;;
--	dvp)
--		basic_machine=dvp-scei
--		os=-elf
--		;;
- 	mips3*-*)
- 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- 		;;
-@@ -1200,7 +1197,7 @@ case $basic_machine in
- 	we32k)
- 		basic_machine=we32k-att
- 		;;
--	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
-+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
- 		basic_machine=sh-unknown
- 		;;
- 	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-@@ -1270,10 +1267,11 @@ case $os in
- 	# Each alternative MUST END IN A *, to match a version number.
- 	# -sysv* is not here because it comes later, after sysvr4.
- 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
--	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
- 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-+	      | -kopensolaris* \
- 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
--	      | -aos* \
-+	      | -aos* | -aros* \
- 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-@@ -1292,7 +1290,7 @@ case $os in
- 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
--	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -irx*)
-+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
- 	# Remember, each alternative MUST END IN *, to match a version number.
- 		;;
- 	-qnx*)
-@@ -1622,7 +1620,7 @@ case $basic_machine in
- 			-sunos*)
- 				vendor=sun
- 				;;
--			-aix*)
-+			-cnk*|-aix*)
- 				vendor=ibm
- 				;;
- 			-beos*)
diff --git a/package/cryptsetup/patches/patch-configure b/package/cryptsetup/patches/patch-configure
index dca09cae2..be8bf3375 100644
--- a/package/cryptsetup/patches/patch-configure
+++ b/package/cryptsetup/patches/patch-configure
@@ -1,6 +1,143 @@
 --- cryptsetup-1.1.0.orig/configure	2010-01-17 11:29:24.000000000 +0100
-+++ cryptsetup-1.1.0/configure	2010-02-14 18:24:56.000000000 +0100
-@@ -14619,7 +14619,7 @@ _ACEOF
++++ cryptsetup-1.1.0/configure	2010-02-16 20:32:36.868858986 +0100
+@@ -894,7 +894,6 @@ enable_nls
+ enable_rpath
+ with_libiconv_prefix
+ with_libintl_prefix
+-enable_shared_library
+ enable_selinux
+ with_plain_hash
+ with_plain_cipher
+@@ -1543,7 +1542,7 @@ Optional Features:
+   --disable-largefile     omit support for large files
+   --disable-nls           do not use Native Language Support
+   --disable-rpath         do not hardcode runtime library paths
+-  --disable-shared-library
++  --disable-shared
+                           disable building of shared cryptsetup library
+   --disable-selinux       disable selinux support [default=auto]
+ 
+@@ -5966,13 +5965,13 @@ if test "${lt_cv_nm_interface+set}" = se
+ else
+   lt_cv_nm_interface="BSD nm"
+   echo "int some_variable = 0;" > conftest.$ac_ext
+-  (eval echo "\"\$as_me:5969: $ac_compile\"" >&5)
++  (eval echo "\"\$as_me:5968: $ac_compile\"" >&5)
+   (eval "$ac_compile" 2>conftest.err)
+   cat conftest.err >&5
+-  (eval echo "\"\$as_me:5972: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
++  (eval echo "\"\$as_me:5971: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+   cat conftest.err >&5
+-  (eval echo "\"\$as_me:5975: output\"" >&5)
++  (eval echo "\"\$as_me:5974: output\"" >&5)
+   cat conftest.out >&5
+   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+     lt_cv_nm_interface="MS dumpbin"
+@@ -7177,7 +7176,7 @@ ia64-*-hpux*)
+   ;;
+ *-*-irix6*)
+   # Find out which ABI we are using.
+-  echo '#line 7180 "configure"' > conftest.$ac_ext
++  echo '#line 7179 "configure"' > conftest.$ac_ext
+   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+@@ -8409,11 +8408,11 @@ else
+    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+    -e 's:$: $lt_compiler_flag:'`
+-   (eval echo "\"\$as_me:8412: $lt_compile\"" >&5)
++   (eval echo "\"\$as_me:8411: $lt_compile\"" >&5)
+    (eval "$lt_compile" 2>conftest.err)
+    ac_status=$?
+    cat conftest.err >&5
+-   echo "$as_me:8416: \$? = $ac_status" >&5
++   echo "$as_me:8415: \$? = $ac_status" >&5
+    if (exit $ac_status) && test -s "$ac_outfile"; then
+      # The compiler can only warn and ignore the option if not recognized
+      # So say no if there are warnings other than the usual output.
+@@ -8748,11 +8747,11 @@ else
+    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+    -e 's:$: $lt_compiler_flag:'`
+-   (eval echo "\"\$as_me:8751: $lt_compile\"" >&5)
++   (eval echo "\"\$as_me:8750: $lt_compile\"" >&5)
+    (eval "$lt_compile" 2>conftest.err)
+    ac_status=$?
+    cat conftest.err >&5
+-   echo "$as_me:8755: \$? = $ac_status" >&5
++   echo "$as_me:8754: \$? = $ac_status" >&5
+    if (exit $ac_status) && test -s "$ac_outfile"; then
+      # The compiler can only warn and ignore the option if not recognized
+      # So say no if there are warnings other than the usual output.
+@@ -8853,11 +8852,11 @@ else
+    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+    -e 's:$: $lt_compiler_flag:'`
+-   (eval echo "\"\$as_me:8856: $lt_compile\"" >&5)
++   (eval echo "\"\$as_me:8855: $lt_compile\"" >&5)
+    (eval "$lt_compile" 2>out/conftest.err)
+    ac_status=$?
+    cat out/conftest.err >&5
+-   echo "$as_me:8860: \$? = $ac_status" >&5
++   echo "$as_me:8859: \$? = $ac_status" >&5
+    if (exit $ac_status) && test -s out/conftest2.$ac_objext
+    then
+      # The compiler can only warn and ignore the option if not recognized
+@@ -8908,11 +8907,11 @@ else
+    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+    -e 's:$: $lt_compiler_flag:'`
+-   (eval echo "\"\$as_me:8911: $lt_compile\"" >&5)
++   (eval echo "\"\$as_me:8910: $lt_compile\"" >&5)
+    (eval "$lt_compile" 2>out/conftest.err)
+    ac_status=$?
+    cat out/conftest.err >&5
+-   echo "$as_me:8915: \$? = $ac_status" >&5
++   echo "$as_me:8914: \$? = $ac_status" >&5
+    if (exit $ac_status) && test -s out/conftest2.$ac_objext
+    then
+      # The compiler can only warn and ignore the option if not recognized
+@@ -11292,7 +11291,7 @@ else
+   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+   lt_status=$lt_dlunknown
+   cat > conftest.$ac_ext <<_LT_EOF
+-#line 11295 "configure"
++#line 11294 "configure"
+ #include "confdefs.h"
+ 
+ #if HAVE_DLFCN_H
+@@ -11388,7 +11387,7 @@ else
+   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+   lt_status=$lt_dlunknown
+   cat > conftest.$ac_ext <<_LT_EOF
+-#line 11391 "configure"
++#line 11390 "configure"
+ #include "confdefs.h"
+ 
+ #if HAVE_DLFCN_H
+@@ -14409,14 +14408,14 @@ POPT_LIBS=$LIBS
+ LIBS=$saved_LIBS
+ 
+ 
+-# Check whether --enable-shared-library was given.
+-if test "${enable_shared_library+set}" = set; then :
+-  enableval=$enable_shared_library;
++# Check whether --enable-shared was given.
++if test "${enable_shared+set}" = set; then :
++  enableval=$enable_shared;
+ else
+-  enable_shared_library=yes
++  enable_shared=yes
+ fi
+ 
+- if test x$enable_shared_library = xno; then
++ if test x$enable_shared = xno; then
+   STATIC_LIBRARY_TRUE=
+   STATIC_LIBRARY_FALSE='#'
+ else
+@@ -14619,7 +14618,7 @@ _ACEOF
  
  fi
  
@@ -9,7 +146,7 @@
  		SELINUX_STATIC_LIBS=$LIBS
  		# Check if we need -pthread with --enable-static and selinux
  		saved_LIBS2=$LIBS
-@@ -14684,7 +14684,7 @@ fi
+@@ -14684,7 +14683,7 @@ fi
  	fi
  fi
  
@@ -18,7 +155,7 @@
  	saved_LIBS2=$LIBS
  	LIBS="$LIBS -static"
  	# Check if it there is still not some missing dependency like static selinux libs
-@@ -14916,7 +14916,7 @@ fi
+@@ -14916,7 +14915,7 @@ fi
  
  
  
@@ -27,7 +164,7 @@
    STATIC_CRYPTSETUP_TRUE=
    STATIC_CRYPTSETUP_FALSE='#'
  else
-@@ -14924,7 +14924,7 @@ else
+@@ -14924,7 +14923,7 @@ else
    STATIC_CRYPTSETUP_FALSE=
  fi
  
diff --git a/package/cryptsetup/patches/patch-configure_in b/package/cryptsetup/patches/patch-configure_in
index 7d1692b35..6d88412f5 100644
--- a/package/cryptsetup/patches/patch-configure_in
+++ b/package/cryptsetup/patches/patch-configure_in
@@ -1,5 +1,21 @@
 --- cryptsetup-1.1.0.orig/configure.in	2010-01-17 11:26:31.000000000 +0100
-+++ cryptsetup-1.1.0/configure.in	2010-02-14 18:24:56.000000000 +0100
++++ cryptsetup-1.1.0/configure.in	2010-02-16 20:32:36.868858986 +0100
+@@ -62,11 +62,11 @@ LIBS=$saved_LIBS
+ 
+ dnl ==========================================================================
+ 
+-AC_ARG_ENABLE(shared-library,
+-[  --disable-shared-library
++AC_ARG_ENABLE(shared,
++[  --disable-shared
+                           disable building of shared cryptsetup library],,
+-enable_shared_library=yes)
+-AM_CONDITIONAL(STATIC_LIBRARY, test x$enable_shared_library = xno)
++enable_shared=yes)
++AM_CONDITIONAL(STATIC_LIBRARY, test x$enable_shared = xno)
+ 
+ AC_ARG_ENABLE(selinux,
+ [  --disable-selinux       disable selinux support [[default=auto]]],[], [])
 @@ -80,7 +80,7 @@ LIBS=$saved_LIBS
  if test "x$enable_selinux" != xno; then
  	AC_CHECK_LIB(sepol, sepol_bool_set)
diff --git a/package/cryptsetup/patches/patch-lib_Makefile_in b/package/cryptsetup/patches/patch-lib_Makefile_in
index f03d83839..812950459 100644
--- a/package/cryptsetup/patches/patch-lib_Makefile_in
+++ b/package/cryptsetup/patches/patch-lib_Makefile_in
@@ -1,5 +1,5 @@
 --- cryptsetup-1.1.0.orig/lib/Makefile.in	2010-01-17 11:29:22.000000000 +0100
-+++ cryptsetup-1.1.0/lib/Makefile.in	2010-02-14 18:24:56.000000000 +0100
++++ cryptsetup-1.1.0/lib/Makefile.in	2010-02-16 20:32:36.872861451 +0100
 @@ -1,4 +1,4 @@
 -# Makefile.in generated by automake 1.11 from Makefile.am.
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
diff --git a/package/cryptsetup/patches/patch-ltmain_sh b/package/cryptsetup/patches/patch-ltmain_sh
deleted file mode 100644
index 9308e958e..000000000
--- a/package/cryptsetup/patches/patch-ltmain_sh
+++ /dev/null
@@ -1,20 +0,0 @@
---- cryptsetup-1.1.0.orig/ltmain.sh	2010-01-17 11:29:15.000000000 +0100
-+++ cryptsetup-1.1.0/ltmain.sh	2010-02-14 18:24:56.000000000 +0100
-@@ -65,7 +65,7 @@
- #       compiler:		$LTCC
- #       compiler flags:		$LTCFLAGS
- #       linker:		$LD (gnu? $with_gnu_ld)
--#       $progname:		(GNU libtool) 2.2.6b Debian-2.2.6b-2
-+#       $progname:		(GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1
- #       automake:		$automake_version
- #       autoconf:		$autoconf_version
- #
-@@ -73,7 +73,7 @@
- 
- PROGRAM=ltmain.sh
- PACKAGE=libtool
--VERSION="2.2.6b Debian-2.2.6b-2"
-+VERSION="2.2.6b Debian-2.2.6b-2ubuntu1"
- TIMESTAMP=""
- package_revision=1.3017
- 
diff --git a/package/cryptsetup/patches/patch-luks_Makefile_in b/package/cryptsetup/patches/patch-luks_Makefile_in
index 25c34308a..208b1f396 100644
--- a/package/cryptsetup/patches/patch-luks_Makefile_in
+++ b/package/cryptsetup/patches/patch-luks_Makefile_in
@@ -1,5 +1,5 @@
 --- cryptsetup-1.1.0.orig/luks/Makefile.in	2010-01-17 11:29:22.000000000 +0100
-+++ cryptsetup-1.1.0/luks/Makefile.in	2010-02-14 18:24:56.000000000 +0100
++++ cryptsetup-1.1.0/luks/Makefile.in	2010-02-16 20:32:36.876861682 +0100
 @@ -1,4 +1,4 @@
 -# Makefile.in generated by automake 1.11 from Makefile.am.
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
diff --git a/package/cryptsetup/patches/patch-man_Makefile_in b/package/cryptsetup/patches/patch-man_Makefile_in
index 349ff6ff4..66fdcb7cf 100644
--- a/package/cryptsetup/patches/patch-man_Makefile_in
+++ b/package/cryptsetup/patches/patch-man_Makefile_in
@@ -1,5 +1,5 @@
 --- cryptsetup-1.1.0.orig/man/Makefile.in	2010-01-17 11:29:23.000000000 +0100
-+++ cryptsetup-1.1.0/man/Makefile.in	2010-02-14 18:24:56.000000000 +0100
++++ cryptsetup-1.1.0/man/Makefile.in	2010-02-16 20:32:36.880860794 +0100
 @@ -1,4 +1,4 @@
 -# Makefile.in generated by automake 1.11 from Makefile.am.
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
diff --git a/package/cryptsetup/patches/patch-src_Makefile_in b/package/cryptsetup/patches/patch-src_Makefile_in
index 73d783646..6c0b0096f 100644
--- a/package/cryptsetup/patches/patch-src_Makefile_in
+++ b/package/cryptsetup/patches/patch-src_Makefile_in
@@ -1,5 +1,5 @@
 --- cryptsetup-1.1.0.orig/src/Makefile.in	2010-01-17 11:29:23.000000000 +0100
-+++ cryptsetup-1.1.0/src/Makefile.in	2010-02-14 18:24:56.000000000 +0100
++++ cryptsetup-1.1.0/src/Makefile.in	2010-02-16 20:32:36.880860794 +0100
 @@ -1,4 +1,4 @@
 -# Makefile.in generated by automake 1.11 from Makefile.am.
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
diff --git a/package/cryptsetup/patches/patch-tests_Makefile_in b/package/cryptsetup/patches/patch-tests_Makefile_in
index 3e465077e..30e05580d 100644
--- a/package/cryptsetup/patches/patch-tests_Makefile_in
+++ b/package/cryptsetup/patches/patch-tests_Makefile_in
@@ -1,5 +1,5 @@
 --- cryptsetup-1.1.0.orig/tests/Makefile.in	2010-01-17 11:29:23.000000000 +0100
-+++ cryptsetup-1.1.0/tests/Makefile.in	2010-02-14 18:24:56.000000000 +0100
++++ cryptsetup-1.1.0/tests/Makefile.in	2010-02-16 20:32:36.888860137 +0100
 @@ -1,4 +1,4 @@
 -# Makefile.in generated by automake 1.11 from Makefile.am.
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.