Initial import

8 files changed, 10022 insertions, 0 deletions

diff --git a/package/cgilib/patches/patch-INSTALL b/package/cgilib/patches/patch-INSTALL
new file mode 100644
index 000000000..e2ce1ee71
--- /dev/null
+++ b/package/cgilib/patches/patch-INSTALL
@@ -0,0 +1,277 @@
+$Id: update-patches 24 2008-08-31 14:56:13Z wbx $
+--- cgilib-0.7.orig/INSTALL	2009-02-08 15:13:57.000000000 +0100
++++ cgilib-0.7/INSTALL	2009-05-09 03:58:09.000000000 +0200
+@@ -1,56 +1,236 @@
+ Installation Instructions
+-=========================
++*************************
+ 
+-The version control system does not contain all files required to
+-compile this project.  This is intentional.
++Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
++Software Foundation, Inc.
+ 
+-These files will be added before releasing a new version of the
+-package outside of the version control system.
++This file is free documentation; the Free Software Foundation gives
++unlimited permission to copy, distribute and modify it.
+ 
+-Compiling from Source
+----------------------
++Basic Installation
++==================
+ 
+-To compile this package you'll have to execute the following two
+-commands:
++These are generic installation instructions.
+ 
+-./configure
+-make
++   The `configure' shell script attempts to guess correct values for
++various system-dependent variables used during compilation.  It uses
++those values to create a `Makefile' in each directory of the package.
++It may also create one or more `.h' files containing system-dependent
++definitions.  Finally, it creates a shell script `config.status' that
++you can run in the future to recreate the current configuration, and a
++file `config.log' containing compiler output (useful mainly for
++debugging `configure').
+ 
+-Compiling from CVS
+-------------------
++   It can also use an optional file (typically called `config.cache'
++and enabled with `--cache-file=config.cache' or simply `-C') that saves
++the results of its tests to speed up reconfiguring.  (Caching is
++disabled by default to prevent problems with accidental use of stale
++cache files.)
+ 
+-Before you can compile this project you'll have to install the
+-following packages:
++   If you need to do unusual things to compile the package, please try
++to figure out how `configure' could check whether to do them, and mail
++diffs or instructions to the address given in the `README' so they can
++be considered for the next release.  If you are using the cache, and at
++some point `config.cache' contains results you don't want to keep, you
++may remove or edit it.
+ 
+- . autoconf
+- . automake
+- . libtool
++   The file `configure.ac' (or `configure.in') is used to create
++`configure' by a program called `autoconf'.  You only need
++`configure.ac' if you want to change it or regenerate `configure' using
++a newer version of `autoconf'.
+ 
+-Once installed you'll have to execute the following commands:
++The simplest way to compile this package is:
+ 
+-aclocal
+-autoconf
+-libtoolize --force
+-automake --add-missing --foreign
++  1. `cd' to the directory containing the package's source code and type
++     `./configure' to configure the package for your system.  If you're
++     using `csh' on an old version of System V, you might need to type
++     `sh ./configure' instead to prevent `csh' from trying to execute
++     `configure' itself.
+ 
+-Now ./configure is generated and needs to be executed.
++     Running `configure' takes awhile.  While running, it prints some
++     messages telling which features it is checking for.
+ 
+-Preparing a release
+--------------------
++  2. Type `make' to compile the package.
+ 
+-After the final commit, edit configure.ac and adjust the package version.
+-Run the following commands:
++  3. Optionally, type `make check' to run any self-tests that come with
++     the package.
+ 
+-aclocal
+-autoconf
+-libtoolize --force --copy
+-automake --copy --add-missing --foreign
++  4. Type `make install' to install the programs and any data files and
++     documentation.
+ 
+-Before building the final release tarball some files may be removed.
++  5. You can remove the program binaries and object files from the
++     source code directory by typing `make clean'.  To also remove the
++     files that `configure' created (so you can compile the package for
++     a different kind of computer), type `make distclean'.  There is
++     also a `make maintainer-clean' target, but that is intended mainly
++     for the package's developers.  If you use it, you may have to get
++     all sorts of other programs in order to regenerate files that came
++     with the distribution.
+ 
+-After a normal build run, execute:
++Compilers and Options
++=====================
+ 
+-make distclean
+-rm -rf autom4te.cache
+-rm -f aclocal.m4
++Some systems require unusual options for compilation or linking that the
++`configure' script does not know about.  Run `./configure --help' for
++details on some of the pertinent environment variables.
++
++   You can give `configure' initial values for configuration parameters
++by setting variables in the command line or in the environment.  Here
++is an example:
++
++     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
++
++   *Note Defining Variables::, for more details.
++
++Compiling For Multiple Architectures
++====================================
++
++You can compile the package for more than one kind of computer at the
++same time, by placing the object files for each architecture in their
++own directory.  To do this, you must use a version of `make' that
++supports the `VPATH' variable, such as GNU `make'.  `cd' to the
++directory where you want the object files and executables to go and run
++the `configure' script.  `configure' automatically checks for the
++source code in the directory that `configure' is in and in `..'.
++
++   If you have to use a `make' that does not support the `VPATH'
++variable, you have to compile the package for one architecture at a
++time in the source code directory.  After you have installed the
++package for one architecture, use `make distclean' before reconfiguring
++for another architecture.
++
++Installation Names
++==================
++
++By default, `make install' installs the package's commands under
++`/usr/local/bin', include files under `/usr/local/include', etc.  You
++can specify an installation prefix other than `/usr/local' by giving
++`configure' the option `--prefix=PREFIX'.
++
++   You can specify separate installation prefixes for
++architecture-specific files and architecture-independent files.  If you
++pass the option `--exec-prefix=PREFIX' to `configure', the package uses
++PREFIX as the prefix for installing programs and libraries.
++Documentation and other data files still use the regular prefix.
++
++   In addition, if you use an unusual directory layout you can give
++options like `--bindir=DIR' to specify different values for particular
++kinds of files.  Run `configure --help' for a list of the directories
++you can set and what kinds of files go in them.
++
++   If the package supports it, you can cause programs to be installed
++with an extra prefix or suffix on their names by giving `configure' the
++option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
++
++Optional Features
++=================
++
++Some packages pay attention to `--enable-FEATURE' options to
++`configure', where FEATURE indicates an optional part of the package.
++They may also pay attention to `--with-PACKAGE' options, where PACKAGE
++is something like `gnu-as' or `x' (for the X Window System).  The
++`README' should mention any `--enable-' and `--with-' options that the
++package recognizes.
++
++   For packages that use the X Window System, `configure' can usually
++find the X include and library files automatically, but if it doesn't,
++you can use the `configure' options `--x-includes=DIR' and
++`--x-libraries=DIR' to specify their locations.
++
++Specifying the System Type
++==========================
++
++There may be some features `configure' cannot figure out automatically,
++but needs to determine by the type of machine the package will run on.
++Usually, assuming the package is built to be run on the _same_
++architectures, `configure' can figure that out, but if it prints a
++message saying it cannot guess the machine type, give it the
++`--build=TYPE' option.  TYPE can either be a short name for the system
++type, such as `sun4', or a canonical name which has the form:
++
++     CPU-COMPANY-SYSTEM
++
++where SYSTEM can have one of these forms:
++
++     OS KERNEL-OS
++
++   See the file `config.sub' for the possible values of each field.  If
++`config.sub' isn't included in this package, then this package doesn't
++need to know the machine type.
++
++   If you are _building_ compiler tools for cross-compiling, you should
++use the option `--target=TYPE' to select the type of system they will
++produce code for.
++
++   If you want to _use_ a cross compiler, that generates code for a
++platform different from the build platform, you should specify the
++"host" platform (i.e., that on which the generated programs will
++eventually be run) with `--host=TYPE'.
++
++Sharing Defaults
++================
++
++If you want to set default values for `configure' scripts to share, you
++can create a site shell script called `config.site' that gives default
++values for variables like `CC', `cache_file', and `prefix'.
++`configure' looks for `PREFIX/share/config.site' if it exists, then
++`PREFIX/etc/config.site' if it exists.  Or, you can set the
++`CONFIG_SITE' environment variable to the location of the site script.
++A warning: not all `configure' scripts look for a site script.
++
++Defining Variables
++==================
++
++Variables not defined in a site shell script can be set in the
++environment passed to `configure'.  However, some packages may run
++configure again during the build, and the customized values of these
++variables may be lost.  In order to avoid this problem, you should set
++them in the `configure' command line, using `VAR=value'.  For example:
++
++     ./configure CC=/usr/local2/bin/gcc
++
++causes the specified `gcc' to be used as the C compiler (unless it is
++overridden in the site shell script).  Here is a another example:
++
++     /bin/bash ./configure CONFIG_SHELL=/bin/bash
++
++Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
++configuration-related scripts to be executed by `/bin/bash'.
++
++`configure' Invocation
++======================
++
++`configure' recognizes the following options to control how it operates.
++
++`--help'
++`-h'
++     Print a summary of the options to `configure', and exit.
++
++`--version'
++`-V'
++     Print the version of Autoconf used to generate the `configure'
++     script, and exit.
++
++`--cache-file=FILE'
++     Enable the cache: use and save the results of the tests in FILE,
++     traditionally `config.cache'.  FILE defaults to `/dev/null' to
++     disable caching.
++
++`--config-cache'
++`-C'
++     Alias for `--cache-file=config.cache'.
++
++`--quiet'
++`--silent'
++`-q'
++     Do not print messages saying which checks are being made.  To
++     suppress all normal output, redirect it to `/dev/null' (any error
++     messages will still be shown).
++
++`--srcdir=DIR'
++     Look for the package's source code in directory DIR.  Usually
++     `configure' can determine that directory automatically.
++
++`configure' also accepts some other, not widely useful, options.  Run
++`configure --help' for more details.
+ 
diff --git a/package/cgilib/patches/patch-Makefile_in b/package/cgilib/patches/patch-Makefile_in
new file mode 100644
index 000000000..540cf21a6
--- /dev/null
+++ b/package/cgilib/patches/patch-Makefile_in
@@ -0,0 +1,491 @@
+$Id: update-patches 24 2008-08-31 14:56:13Z wbx $
+--- cgilib-0.7.orig/Makefile.in	2009-02-08 19:47:04.000000000 +0100
++++ cgilib-0.7/Makefile.in	2009-05-09 04:01:39.000000000 +0200
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.10.1 from Makefile.am.
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
+ # @configure_input@
+ 
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
++# 2003, 2004, 2005  Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -32,11 +32,15 @@
+ 
+ 
+ 
++srcdir = @srcdir@
++top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+ pkgdatadir = $(datadir)/@PACKAGE@
+ pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
++top_builddir = .
+ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++INSTALL = @INSTALL@
+ install_sh_DATA = $(install_sh) -c -m 644
+ install_sh_PROGRAM = $(install_sh) -c
+ install_sh_SCRIPT = $(install_sh) -c
+@@ -51,17 +55,17 @@ POST_UNINSTALL = :
+ build_triplet = @build@
+ host_triplet = @host@
+ bin_PROGRAMS = cgitest$(EXEEXT) jumpto$(EXEEXT)
+-subdir = .
+ DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
+ 	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+-	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL \
++	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
+ 	config.guess config.sub depcomp install-sh ltmain.sh missing
++subdir = .
+ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+ am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ 	$(ACLOCAL_M4)
+ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+- configure.lineno config.status.lineno
++ configure.lineno configure.status.lineno
+ mkinstalldirs = $(install_sh) -d
+ CONFIG_CLEAN_FILES =
+ am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+@@ -78,9 +82,6 @@ LTLIBRARIES = $(lib_LTLIBRARIES)
+ libcgi_la_LIBADD =
+ am_libcgi_la_OBJECTS = cgi.lo cookies.lo aux.lo
+ libcgi_la_OBJECTS = $(am_libcgi_la_OBJECTS)
+-libcgi_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+-	$(libcgi_la_LDFLAGS) $(LDFLAGS) -o $@
+ binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+ PROGRAMS = $(bin_PROGRAMS)
+ am_cgitest_OBJECTS = cgitest.$(OBJEXT)
+@@ -89,18 +90,17 @@ cgitest_DEPENDENCIES = libcgi.la
+ am_jumpto_OBJECTS = cgitest.$(OBJEXT)
+ jumpto_OBJECTS = $(am_jumpto_OBJECTS)
+ jumpto_DEPENDENCIES = libcgi.la
+-DEFAULT_INCLUDES = -I.@am__isrc@
++DEFAULT_INCLUDES = -I. -I$(srcdir)
+ depcomp = $(SHELL) $(top_srcdir)/depcomp
+ am__depfiles_maybe = depfiles
+ COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+-	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
++	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
++	$(AM_CFLAGS) $(CFLAGS)
+ CCLD = $(CC)
+-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+-	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+-	$(LDFLAGS) -o $@
++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
++	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+ SOURCES = $(libcgi_la_SOURCES) $(cgitest_SOURCES) $(jumpto_SOURCES)
+ DIST_SOURCES = $(libcgi_la_SOURCES) $(cgitest_SOURCES) \
+ 	$(jumpto_SOURCES)
+@@ -124,6 +124,8 @@ GZIP_ENV = --best
+ distuninstallcheck_listfiles = find . -type f -print
+ distcleancheck_listfiles = find . -type f -print
+ ACLOCAL = @ACLOCAL@
++AMDEP_FALSE = @AMDEP_FALSE@
++AMDEP_TRUE = @AMDEP_TRUE@
+ AMTAR = @AMTAR@
+ AR = @AR@
+ AUTOCONF = @AUTOCONF@
+@@ -152,7 +154,6 @@ EXEEXT = @EXEEXT@
+ F77 = @F77@
+ FFLAGS = @FFLAGS@
+ GREP = @GREP@
+-INSTALL = @INSTALL@
+ INSTALL_DATA = @INSTALL_DATA@
+ INSTALL_PROGRAM = @INSTALL_PROGRAM@
+ INSTALL_SCRIPT = @INSTALL_SCRIPT@
+@@ -164,7 +165,6 @@ LIBTOOL = @LIBTOOL@
+ LN_S = @LN_S@
+ LTLIBOBJS = @LTLIBOBJS@
+ MAKEINFO = @MAKEINFO@
+-MKDIR_P = @MKDIR_P@
+ NMEDIT = @NMEDIT@
+ OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
+@@ -181,13 +181,13 @@ SHELL = @SHELL@
+ SO_VERSION = @SO_VERSION@
+ STRIP = @STRIP@
+ VERSION = @VERSION@
+-abs_builddir = @abs_builddir@
+-abs_srcdir = @abs_srcdir@
+-abs_top_builddir = @abs_top_builddir@
+-abs_top_srcdir = @abs_top_srcdir@
+ ac_ct_CC = @ac_ct_CC@
+ ac_ct_CXX = @ac_ct_CXX@
+ ac_ct_F77 = @ac_ct_F77@
++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+ am__include = @am__include@
+ am__leading_dot = @am__leading_dot@
+ am__quote = @am__quote@
+@@ -199,7 +199,6 @@ build_alias = @build_alias@
+ build_cpu = @build_cpu@
+ build_os = @build_os@
+ build_vendor = @build_vendor@
+-builddir = @builddir@
+ datadir = @datadir@
+ datarootdir = @datarootdir@
+ docdir = @docdir@
+@@ -227,11 +226,8 @@ program_transform_name = @program_transf
+ psdir = @psdir@
+ sbindir = @sbindir@
+ sharedstatedir = @sharedstatedir@
+-srcdir = @srcdir@
+ sysconfdir = @sysconfdir@
+ target_alias = @target_alias@
+-top_builddir = @top_builddir@
+-top_srcdir = @top_srcdir@
+ lib_LTLIBRARIES = libcgi.la
+ libcgi_la_SOURCES = cgi.c cookies.c aux.c
+ libcgi_la_LDFLAGS = -version-info @SO_VERSION@
+@@ -245,56 +241,23 @@ all: all-am
+ 
+ .SUFFIXES:
+ .SUFFIXES: .c .lo .o .obj
+-am--refresh:
+-	@:
+-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+-	@for dep in $?; do \
+-	  case '$(am__configure_deps)' in \
+-	    *$$dep*) \
+-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+-		&& exit 0; \
+-	      exit 1;; \
+-	  esac; \
+-	done; \
+-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
+-	cd $(top_srcdir) && \
+-	  $(AUTOMAKE) --foreign  Makefile
+-.PRECIOUS: Makefile
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+-	@case '$?' in \
+-	  *config.status*) \
+-	    echo ' $(SHELL) ./config.status'; \
+-	    $(SHELL) ./config.status;; \
+-	  *) \
+-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+-	esac;
+-
+-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+-	$(SHELL) ./config.status --recheck
+-
+-$(top_srcdir)/configure:  $(am__configure_deps)
+-	cd $(srcdir) && $(AUTOCONF)
+-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+ install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ 	@$(NORMAL_INSTALL)
+-	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
++	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+ 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ 	  if test -f $$p; then \
+ 	    f=$(am__strip_dir) \
+-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
++	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
++	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+ 	  else :; fi; \
+ 	done
+ 
+ uninstall-libLTLIBRARIES:
+ 	@$(NORMAL_UNINSTALL)
+-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
++	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ 	  p=$(am__strip_dir) \
+-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
++	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
++	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+ 	done
+ 
+ clean-libLTLIBRARIES:
+@@ -306,18 +269,18 @@ clean-libLTLIBRARIES:
+ 	  rm -f "$${dir}/so_locations"; \
+ 	done
+ libcgi.la: $(libcgi_la_OBJECTS) $(libcgi_la_DEPENDENCIES) 
+-	$(libcgi_la_LINK) -rpath $(libdir) $(libcgi_la_OBJECTS) $(libcgi_la_LIBADD) $(LIBS)
++	$(LINK) -rpath $(libdir) $(libcgi_la_LDFLAGS) $(libcgi_la_OBJECTS) $(libcgi_la_LIBADD) $(LIBS)
+ install-binPROGRAMS: $(bin_PROGRAMS)
+ 	@$(NORMAL_INSTALL)
+-	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
++	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
+ 	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+ 	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ 	  if test -f $$p \
+ 	     || test -f $$p1 \
+ 	  ; then \
+ 	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
++	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
++	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+ 	  else :; fi; \
+ 	done
+ 
+@@ -337,10 +300,10 @@ clean-binPROGRAMS:
+ 	done
+ cgitest$(EXEEXT): $(cgitest_OBJECTS) $(cgitest_DEPENDENCIES) 
+ 	@rm -f cgitest$(EXEEXT)
+-	$(LINK) $(cgitest_OBJECTS) $(cgitest_LDADD) $(LIBS)
++	$(LINK) $(cgitest_LDFLAGS) $(cgitest_OBJECTS) $(cgitest_LDADD) $(LIBS)
+ jumpto$(EXEEXT): $(jumpto_OBJECTS) $(jumpto_DEPENDENCIES) 
+ 	@rm -f jumpto$(EXEEXT)
+-	$(LINK) $(jumpto_OBJECTS) $(jumpto_LDADD) $(LIBS)
++	$(LINK) $(jumpto_LDFLAGS) $(jumpto_OBJECTS) $(jumpto_LDADD) $(LIBS)
+ 
+ mostlyclean-compile:
+ 	-rm -f *.$(OBJEXT)
+@@ -354,22 +317,22 @@ distclean-compile:
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cookies.Plo@am__quote@
+ 
+ .c.o:
+-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
++@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(COMPILE) -c $<
+ 
+ .c.obj:
+-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
++@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+ 
+ .c.lo:
+-@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
++@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+@@ -382,9 +345,10 @@ clean-libtool:
+ 
+ distclean-libtool:
+ 	-rm -f libtool
++uninstall-info-am:
+ install-man3: $(man3_MANS) $(man_MANS)
+ 	@$(NORMAL_INSTALL)
+-	test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
++	test -z "$(man3dir)" || $(mkdir_p) "$(DESTDIR)$(man3dir)"
+ 	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
+ 	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ 	for i in $$l2; do \
+@@ -429,7 +393,7 @@ uninstall-man3:
+ 	done
+ install-man5: $(man5_MANS) $(man_MANS)
+ 	@$(NORMAL_INSTALL)
+-	test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
++	test -z "$(man5dir)" || $(mkdir_p) "$(DESTDIR)$(man5dir)"
+ 	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
+ 	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ 	for i in $$l2; do \
+@@ -474,7 +438,7 @@ uninstall-man5:
+ 	done
+ install-includeHEADERS: $(include_HEADERS)
+ 	@$(NORMAL_INSTALL)
+-	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
++	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
+ 	@list='$(include_HEADERS)'; for p in $$list; do \
+ 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ 	  f=$(am__strip_dir) \
+@@ -495,8 +459,8 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS
+ 	unique=`for i in $$list; do \
+ 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ 	  done | \
+-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
++	  $(AWK) '    { files[$$0] = 1; } \
++	       END { for (i in files) print i; }'`; \
+ 	mkid -fID $$unique
+ tags: TAGS
+ 
+@@ -508,8 +472,8 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEP
+ 	unique=`for i in $$list; do \
+ 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ 	  done | \
+-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
++	  $(AWK) '    { files[$$0] = 1; } \
++	       END { for (i in files) print i; }'`; \
+ 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ 	  test -n "$$unique" || unique=$$empty_fix; \
+ 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+@@ -519,12 +483,13 @@ ctags: CTAGS
+ CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+ 		$(TAGS_FILES) $(LISP)
+ 	tags=; \
++	here=`pwd`; \
+ 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ 	unique=`for i in $$list; do \
+ 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ 	  done | \
+-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
++	  $(AWK) '    { files[$$0] = 1; } \
++	       END { for (i in files) print i; }'`; \
+ 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ 	     $$tags $$unique
+@@ -539,22 +504,23 @@ distclean-tags:
+ 
+ distdir: $(DISTFILES)
+ 	$(am__remove_distdir)
+-	test -d $(distdir) || mkdir $(distdir)
+-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+-	list='$(DISTFILES)'; \
+-	  dist_files=`for file in $$list; do echo $$file; done | \
+-	  sed -e "s|^$$srcdirstrip/||;t" \
+-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+-	case $$dist_files in \
+-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+-			   sort -u` ;; \
+-	esac; \
+-	for file in $$dist_files; do \
++	mkdir $(distdir)
++	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
++	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
++	list='$(DISTFILES)'; for file in $$list; do \
++	  case $$file in \
++	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
++	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
++	  esac; \
+ 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
++	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
++	    dir="/$$dir"; \
++	    $(mkdir_p) "$(distdir)$$dir"; \
++	  else \
++	    dir=''; \
++	  fi; \
+ 	  if test -d $$d/$$file; then \
+-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ 	    fi; \
+@@ -568,7 +534,7 @@ distdir: $(DISTFILES)
+ 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
++	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ 	|| chmod -R a+r $(distdir)
+ dist-gzip: distdir
+ 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+@@ -578,10 +544,6 @@ dist-bzip2: distdir
+ 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ 	$(am__remove_distdir)
+ 
+-dist-lzma: distdir
+-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+-	$(am__remove_distdir)
+-
+ dist-tarZ: distdir
+ 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ 	$(am__remove_distdir)
+@@ -608,8 +570,6 @@ distcheck: dist
+ 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ 	*.tar.bz2*) \
+ 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+-	*.tar.lzma*) \
+-	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+ 	*.tar.Z*) \
+ 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ 	*.shar.gz*) \
+@@ -649,7 +609,7 @@ distcheck: dist
+ 	$(am__remove_distdir)
+ 	@(echo "$(distdir) archives ready for distribution: "; \
+ 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
++	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+ distuninstallcheck:
+ 	@cd $(distuninstallcheck_dir) \
+ 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+@@ -675,7 +635,7 @@ install-binPROGRAMS: install-libLTLIBRAR
+ 
+ installdirs:
+ 	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(includedir)"; do \
+-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
++	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ 	done
+ install: install-am
+ install-exec: install-exec-am
+@@ -725,20 +685,12 @@ info-am:
+ 
+ install-data-am: install-includeHEADERS install-man
+ 
+-install-dvi: install-dvi-am
+-
+ install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+ 
+-install-html: install-html-am
+-
+ install-info: install-info-am
+ 
+ install-man: install-man3 install-man5
+ 
+-install-pdf: install-pdf-am
+-
+-install-ps: install-ps-am
+-
+ installcheck-am:
+ 
+ maintainer-clean: maintainer-clean-am
+@@ -762,31 +714,28 @@ ps: ps-am
+ ps-am:
+ 
+ uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+-	uninstall-libLTLIBRARIES uninstall-man
++	uninstall-info-am uninstall-libLTLIBRARIES uninstall-man
+ 
+ uninstall-man: uninstall-man3 uninstall-man5
+ 
+-.MAKE: install-am install-strip
+-
+ .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+ 	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+ 	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
+-	dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \
++	dist-shar dist-tarZ dist-zip distcheck distclean \
+ 	distclean-compile distclean-generic distclean-libtool \
+ 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ 	dvi-am html html-am info info-am install install-am \
+-	install-binPROGRAMS install-data install-data-am install-dvi \
+-	install-dvi-am install-exec install-exec-am install-html \
+-	install-html-am install-includeHEADERS install-info \
++	install-binPROGRAMS install-data install-data-am install-exec \
++	install-exec-am install-includeHEADERS install-info \
+ 	install-info-am install-libLTLIBRARIES install-man \
+-	install-man3 install-man5 install-pdf install-pdf-am \
+-	install-ps install-ps-am install-strip installcheck \
++	install-man3 install-man5 install-strip installcheck \
+ 	installcheck-am installdirs maintainer-clean \
+ 	maintainer-clean-generic mostlyclean mostlyclean-compile \
+ 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ 	tags uninstall uninstall-am uninstall-binPROGRAMS \
+-	uninstall-includeHEADERS uninstall-libLTLIBRARIES \
+-	uninstall-man uninstall-man3 uninstall-man5
++	uninstall-includeHEADERS uninstall-info-am \
++	uninstall-libLTLIBRARIES uninstall-man uninstall-man3 \
++	uninstall-man5
+ 
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
diff --git a/package/cgilib/patches/patch-cgi_c b/package/cgilib/patches/patch-cgi_c
new file mode 100644
index 000000000..0e4052688
--- /dev/null
+++ b/package/cgilib/patches/patch-cgi_c
@@ -0,0 +1,12 @@
+$Id: update-patches 24 2008-08-31 14:56:13Z wbx $
+--- cgilib-0.7.orig/cgi.c	2009-01-11 22:59:16.000000000 +0100
++++ cgilib-0.7/cgi.c	2009-03-31 19:16:46.214155324 +0200
+@@ -327,7 +327,7 @@ s_cgi *cgiReadMultipart (char *boundary)
+ 			file->name = name;
+ 			file->type = type;
+ 			file->tmpfile = tmpfile;
+-			if ((cp = rindex (fname, '/')) == NULL)
++			if ((cp = strrchr (fname, '/')) == NULL)
+ 			    file->filename = fname;
+ 			else {
+ 			    file->filename = strdup (++cp);
diff --git a/package/cgilib/patches/patch-configure b/package/cgilib/patches/patch-configure
new file mode 100644
index 000000000..3a682731e
--- /dev/null
+++ b/package/cgilib/patches/patch-configure
@@ -0,0 +1,8132 @@
+$Id: update-patches 24 2008-08-31 14:56:13Z wbx $
+--- cgilib-0.7.orig/configure	2009-02-08 19:47:03.000000000 +0100
++++ cgilib-0.7/configure	2009-05-09 03:58:09.000000000 +0200
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated by GNU Autoconf 2.61.
++# Generated by GNU Autoconf 2.62.
+ #
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
++# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
+ ## --------------------- ##
+@@ -15,7 +15,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+   emulate sh
+   NULLCMD=:
+-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+   # is contrary to our usage.  Disable this feature.
+   alias -g '${1+"$@"}'='"$@"'
+   setopt NO_GLOB_SUBST
+@@ -37,17 +37,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE
+ as_cr_digits='0123456789'
+ as_cr_alnum=$as_cr_Letters$as_cr_digits
+ 
+-# The user is always right.
+-if test "${PATH_SEPARATOR+set}" != set; then
+-  echo "#! /bin/sh" >conf$$.sh
+-  echo  "exit 0"   >>conf$$.sh
+-  chmod +x conf$$.sh
+-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+-    PATH_SEPARATOR=';'
++as_nl='
++'
++export as_nl
++# Printing a long string crashes Solaris 7 /usr/bin/printf.
++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
++if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
++  as_echo='printf %s\n'
++  as_echo_n='printf %s'
++else
++  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
++    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
++    as_echo_n='/usr/ucb/echo -n'
+   else
+-    PATH_SEPARATOR=:
++    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
++    as_echo_n_body='eval
++      arg=$1;
++      case $arg in
++      *"$as_nl"*)
++	expr "X$arg" : "X\\(.*\\)$as_nl";
++	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
++      esac;
++      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
++    '
++    export as_echo_n_body
++    as_echo_n='sh -c $as_echo_n_body as_echo'
+   fi
+-  rm -f conf$$.sh
++  export as_echo_body
++  as_echo='sh -c $as_echo_body as_echo'
++fi
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++  PATH_SEPARATOR=:
++  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
++    (PATH=