create core package section, cleanup old installer stuff

5 files changed, 0 insertions, 403 deletions

diff --git a/package/adkinstall/src/adkinstall b/package/adkinstall/src/adkinstall
deleted file mode 100644
index 2f14d0b96..000000000
--- a/package/adkinstall/src/adkinstall
+++ /dev/null
@@ -1,167 +0,0 @@
-#!/bin/sh
-# installs a rootfs tar archive from OpenADK onto a Compact Flash disk
-
-check_exit() {
-        if [ $? -ne 0 ];then
-                echo "Installation failed."
-                exit 1
-        fi
-}
-
-rescue=0
-while getopts "r" option
-do
-	case $option in
-		r)
-			rescue=1
-			;;
-		*)
-			printf "Option not recognized\n"
-			exit 1
-			;;
-	esac
-done
-shift $(($OPTIND - 1))
-
-if [ -z $1 ];then
-        printf "Please give your root tar archive as parameter\n"
-        exit 1
-fi
-
-if [ $rescue -eq 1 ];then
-	if [ -z $2 ];then
-		printf "Please give your rescue kernel image as second parameter\n"
-		exit 2
-	fi
-	if [ ! -f $2 ];then
-		printf "$2 is not a file, Exiting.\n"
-		exit 1
-	fi
-fi
-
-printf "Creating partitions ...\n"
-parted -s /dev/sda mklabel msdos
-check_exit
-sleep 2
-maxsize=$(env LC_ALL=C parted /dev/sda -s unit cyl print |awk '/^Disk/ { print $3 }'|sed -e 's/cyl//')
-rootsize=$(($maxsize-2))
-start=0
-rootp=1
-cfgfsp=2
-if [ $rescue -eq 1 ];then
-	rootp=3
-	cfgfsp=4
-	start=2
-	parted -s /dev/sda unit cyl mkpart primary ext2 0 1
-	check_exit
-	mke2fs -q /dev/sda1
-	check_exit
-	parted -s /dev/sda unit cyl mkpart primary ext2 1 2
-	check_exit
-	mke2fs -q /dev/sda2
-	check_exit
-fi
-parted -s /dev/sda unit cyl mkpart primary ext2 $start $rootsize
-check_exit
-mke2fs -q /dev/sda1
-check_exit
-parted -s /dev/sda unit cyl mkpart primary fat32 $rootsize $maxsize
-check_exit
-parted -s /dev/sda set $rootp boot on
-check_exit
-sfdisk --change-id /dev/sda $cfgfsp 88 >/dev/null 2>&1
-check_exit
-# settle down
-sleep 2
-mount -t ext2 /dev/sda$rootp /mnt
-check_exit
-printf "Extracting install archive ...\n"
-tar -C /mnt -xzpf $1
-check_exit
-chmod 1777 /mnt/tmp
-chmod 4755 /mnt/bin/busybox
-if [ $rescue -eq 1 ];then
-	mkdir /mnt/boot/grub
-fi
-
-speed=$(awk -F \, '/console=ttyS0/ { print $2 }' /proc/cmdline|sed -e "s/ .*$//")
-
-if [ $rescue -eq 1 ];then
-	umount /mnt
-	mount /dev/sda2 /mnt
-	cp $2 /mnt/rescue
-fi
-printf "Installing bootloader ...\n"
-mkdir -p /mnt/boot/grub
-if [ $rescue -eq 1 ];then
-mount /dev/sda1 /mnt/boot/grub
-cat << EOF > /mnt/boot/grub/grub.cfg
-set timeout=1
-serial --unit=0 --speed=$speed
-terminal_output serial 
-terminal_input serial 
-
-if [ -s \$prefix/grubenv ]; then
-  load_env
-fi
-
-set default="\${saved_entry}"
-
-if [ \${prev_saved_entry} ]; then
-  set saved_entry=\${prev_saved_entry}
-  save_env saved_entry
-  set prev_saved_entry=
-  save_env prev_saved_entry
-  set boot_once=true
-fi
-
-function savedefault {
-  if [ -z \${boot_once} ]; then
-    saved_entry=\${chosen}
-    save_env saved_entry
-  fi
-}
-
-function recordfail {
-  set recordfail=1
-  if [ -n \${have_grubenv} ]; then if [ -z \${boot_once} ]; then save_env recordfail; fi; fi
-}
-
-menuentry "GNU/Linux (OpenADK)" {
-	recordfail
-        insmod ext2
-        set root=(hd0,3)
-        linux /boot/kernel root=/dev/sda$rootp ro init=/init panic=10
-}
-
-menuentry "GNU/Linux (OpenADK) Rescue Mode" {
-	recordfail
-        insmod ext2
-        set root=(hd0,2)
-        linux /rescue ro init=/init panic=10
-}
-EOF
-else
-cat << EOF > /mnt/boot/grub/grub.cfg
-set default=0
-set timeout=1
-serial --unit=0 --speed=$speed
-terminal_output serial 
-terminal_input serial 
-
-menuentry "GNU/Linux (OpenADK)" {
-        insmod ext2
-        set root=(hd0,1)
-        linux /boot/kernel root=/dev/sda$rootp ro init=/init panic=10
-}
-EOF
-fi
-grub-install --root-directory=/mnt /dev/sda 
-check_exit
-if [ $rescue -eq 1 ];then
-	grub-set-default --root-directory=/mnt 0
-	umount /mnt/boot/grub
-fi
-umount /mnt
-printf "Successfully installed. You can reboot now.\n"
-exit 0
diff --git a/package/adkinstall/src/adkinstall.foxg20 b/package/adkinstall/src/adkinstall.foxg20
deleted file mode 100644
index 99cd899f4..000000000
--- a/package/adkinstall/src/adkinstall.foxg20
+++ /dev/null
@@ -1,54 +0,0 @@
-#!/bin/sh
-# installs a rootfs tar archive from OpenADK onto a micro SD card
-# special script for foxboard netus aka foxg20
-
-if [ -z $1 ];then
-        printf "Please give your root tar archive as parameter\n"
-        exit 1
-fi
-
-if [ ! -f $1 ];then
-	printf "given root tar archive does not exist\n"
-	exit 1
-fi
-
-printf "Creating partition scheme\n"
-parted -s /dev/mmcblk0 mklabel msdos
-sleep 2
-maxsize=$(env LC_ALL=C parted /dev/mmcblk0 -s unit cyl print |awk '/^Disk/ { print $3 }'|sed -e 's/cyl//')
-rootsize=$(($maxsize-2))
-parted -s /dev/mmcblk0 unit cyl mkpart primary fat32 0 5
-parted -s /dev/mmcblk0 unit cyl mkpart primary ext2 5 $rootsize
-parted -s /dev/mmcblk0 unit cyl mkpart primary fat32 $rootsize $maxsize
-parted -s /dev/mmcblk0 set 1 boot on
-sfdisk --change-id /dev/mmcblk0 3 88 >/dev/null 2>&1
-sleep 2
-sync
-printf "Creating vfat filesystem\n"
-mkfs.vfat /dev/mmcblk0p1 >/dev/null 2>&1
-printf "Creating ext2 filesystem\n"
-mke2fs /dev/mmcblk0p2 >/dev/null 2>&1
-tune2fs -c0 -i0 /dev/mmcblk0p2 >/dev/null 2>&1
-mount -t ext2 /dev/mmcblk0p2 /mnt
-mkdir /mnt/boot
-mount -t vfat /dev/mmcblk0p1 /mnt/boot
-
-printf "Extracting install archive\n"
-tar -C /mnt -xzpf $1
-if [ $? -ne 0 ];then
-	printf "Extracting of install archive failed"
-	exit 1
-fi
-
-chmod 1777 /mnt/tmp
-chmod 4755 /mnt/bin/busybox
-sync
-umount /mnt/boot
-umount /mnt
-if [ $? -ne 0 ];then
-	printf "Unmounting filesystem failed"
-	exit 1
-else
-	printf "Successfully installed.\n"
-	exit 0
-fi
diff --git a/package/adkinstall/src/adkinstall.rb4xx b/package/adkinstall/src/adkinstall.rb4xx
deleted file mode 100644
index afaea0c39..000000000
--- a/package/adkinstall/src/adkinstall.rb4xx
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-# installs a rootfs tar archive from OpenADK onto a NAND device
-# special script for routerboard rb4xx
-
-if [ -z $1 ];then
-        printf "Please give your root tar archive as parameter\n"
-        exit 1
-fi
-
-printf "Preparing mountpoints\n"
-mount -t yaffs2 /dev/mtdblock2 /mnt
-rm -rf /mnt/* >/dev/null 2>&1
-mkdir /mnt/boot
-mount -t yaffs2 /dev/mtdblock1 /mnt/boot
-
-printf "Extracting install archive\n"
-tar -C /mnt -xzpf $1
-if [ $? -ne 0 ];then
-	printf "Extracting of install archive failed"
-	exit 1
-fi
-
-chmod 1777 /mnt/tmp
-chmod 4755 /mnt/bin/busybox
-
-sync
-umount /mnt/boot
-umount /mnt
-if [ $? -ne 0 ];then
-	printf "Unmounting filesystem failed"
-	exit 1
-else
-	printf "Successfully installed.\n"
-	exit 0
-fi
diff --git a/package/adkinstall/src/adkinstall.rb532 b/package/adkinstall/src/adkinstall.rb532
deleted file mode 100644
index 9f1af0bb6..000000000
--- a/package/adkinstall/src/adkinstall.rb532
+++ /dev/null
@@ -1,88 +0,0 @@
-#!/bin/sh
-# installs a rootfs tar archive from OpenADK onto 
-# a Compact Flash disk or NAND device
-# special script for routerboard rb532
-
-nandinstall=0
-cfinstall=0
-
-if [ -z $1 ];then
-        printf "Please give your target device as first parameter [cf|nand]\n"
-        exit 1
-fi
-if [ -z $2 ];then
-        printf "Please give your root tar archive as second parameter\n"
-        exit 1
-fi
-case $1 in
-	nand)
-		nandinstall=1
-		;;
-	cf)
-		cfinstall=1
-		;;
-	*)
-		printf "Target device not known.\n"
-		exit 1
-		;;
-esac
-
-if [ $cfinstall -eq 1 ];then
-	if [ -z $3 ];then
-       	 printf "Please give your kernel as third parameter\n"
-       	 exit 1
-	fi
-fi
-
-if [ $cfinstall -eq 1 ];then
-	# create empty partition table
-	printf "Creating partition scheme\n"
-	parted -s /dev/sda mklabel msdos
-	sleep 2
-	maxsize=$(env LC_ALL=C parted /dev/sda -s unit cyl print |awk '/^Disk/ { print $3 }'|sed -e 's/cyl//')
-	rootsize=$(($maxsize-2))
-	parted -s /dev/sda unit cyl mkpart primary ext2 0 1
-	parted -s /dev/sda unit cyl mkpart primary ext2 1 $rootsize
-	parted -s /dev/sda unit cyl mkpart primary fat32 $rootsize $maxsize
-	parted -s /dev/sda set 1 boot on
-	sfdisk --change-id /dev/sda 1 27 >/dev/null 2>&1
-	sfdisk --change-id /dev/sda 3 88 >/dev/null 2>&1
-	sleep 2
-	mke2fs /dev/sda2
-	sync
-	printf "Installing kernel\n"
-	dd if=$3 of=/dev/sda1 bs=2048 >/dev/null 2>&1
-	sync
-	mount -t ext2 /dev/sda2 /mnt
-fi
-
-if [ $nandinstall -eq 1 ];then
-	printf "Preparing mountpoints\n"
-	mount -t yaffs2 /dev/mtdblock1 /mnt
-	rm -rf /mnt/* >/dev/null 2>&1
-	mkdir /mnt/boot
-	mount -t yaffs2 /dev/mtdblock0 /mnt/boot
-fi
-
-printf "Extracting install archive\n"
-tar -C /mnt -xzpf $2
-if [ $? -ne 0 ];then
-	printf "Extracting of install archive failed"
-	exit 1
-fi
-
-chmod 1777 /mnt/tmp
-chmod 4755 /mnt/bin/busybox
-sync
-
-if [ $nandinstall -eq 1 ];then
-	umount /mnt/boot
-fi
-umount /mnt
-if [ $? -ne 0 ];then
-	printf "Unmounting filesystem failed"
-	exit 1
-else
-	printf "Successfully installed.\n"
-	exit 0
-fi
diff --git a/package/adkinstall/src/adkinstall.yeelong b/package/adkinstall/src/adkinstall.yeelong
deleted file mode 100644
index b6735ec54..000000000
--- a/package/adkinstall/src/adkinstall.yeelong
+++ /dev/null
@@ -1,59 +0,0 @@
-#!/bin/sh
-# installs a rootfs tar archive from OpenADK onto a disk
-# lemote yeelong specific installer
-
-check_exit() {
-        if [ $? -ne 0 ];then
-                echo "Installation failed."
-                exit 1
-        fi
-}
-
-if [ -z $1 ];then
-        printf "Please give your root tar archive as parameter\n"
-        exit 1
-fi
-
-printf "Creating partitions ...\n"
-parted -s /dev/sda mklabel msdos
-check_exit
-sleep 2
-maxsize=$(env LC_ALL=C parted /dev/sda -s unit cyl print |awk '/^Disk/ { print $3 }'|sed -e 's/cyl//')
-rootsize=$(($maxsize-2))
-start=0
-rootp=1
-cfgfsp=2
-
-parted -s /dev/sda unit cyl mkpart primary ext2 $start $rootsize
-check_exit
-mke2fs -q /dev/sda1
-check_exit
-parted -s /dev/sda unit cyl mkpart primary fat32 $rootsize $maxsize
-check_exit
-parted -s /dev/sda set $rootp boot on
-check_exit
-sfdisk --change-id /dev/sda $cfgfsp 88 >/dev/null 2>&1
-check_exit
-# settle down
-sleep 2
-mount -t ext2 /dev/sda$rootp /mnt
-check_exit
-printf "Extracting install archive ...\n"
-tar -C /mnt -xzpf $1
-check_exit
-chmod 1777 /mnt/tmp
-chmod 4755 /mnt/bin/busybox
-
-cat << EOF > /mnt/boot/boot.cfg
-default 0
-timeout 3
-showmenu 1
-title OpenADK
-        kernel (wd0,0)/boot/kernel
-        args root=/dev/sda1 ro panic=10
-}
-EOF
-
-umount /mnt
-printf "Successfully installed. You can reboot now.\n"
-exit 0