summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorThorsten Glaser <tg@mirbsd.org>2011-01-06 00:22:10 +0000
committerWaldemar Brodkorb <wbx@openadk.org>2011-01-06 03:25:10 +0100
commitf6897b395f6340132ab47a46fe587e8e6ced647a (patch)
tree644a8ec3381c46646c69c2fbf4894b5be5933709
parentc4eef4c58ae81bc4b6b2a24842c6a45b79b0665f (diff)
Add experimental code to self-relocate vmlinuz on e.g. brcm
This is needed for the following reason: our memory layout looks like this: | |vmlinux | |CFE| * | | | |vmlinuz | | ^ Since CFE can only load to the spot marked with ‘^’ anyway, we load vmlinub.elf there which is basically a big rodata blob containing vmlinuz and minimal code moving it to the location pointed with vmlinuz above. Another solution would be to use CFE’s “boot -raw” to place it on the location marked with ‘*’ above (but the CFE location and size are dynamic, and since it insists on loading to 0x80001000 anyway, this point is virtually moot). Even worse, we probably cannot overwrite CFE space even late, so we move vmlinuz like this: | |vmlinux | |CFE| |vmlinuz | | This way, both “Total memory used by CFE” and “Boot area (physical)” (the latter as mapped into KSEG0) are retained. Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
-rw-r--r--target/linux/patches/2.6.36/zboot-brcm-reloc.patch297
1 files changed, 297 insertions, 0 deletions
diff --git a/target/linux/patches/2.6.36/zboot-brcm-reloc.patch b/target/linux/patches/2.6.36/zboot-brcm-reloc.patch
new file mode 100644
index 000000000..62de01b36
--- /dev/null
+++ b/target/linux/patches/2.6.36/zboot-brcm-reloc.patch
@@ -0,0 +1,297 @@
+--- /dev/null Thu Jan 6 02:10:11 2011
++++ linux-2.6.36/arch/mips/boot/compressed/invcache.S Thu Jan 6 01:32:57 2011
+@@ -0,0 +1,132 @@
++/*-
++ * written 2011 by Thorsten Glaser <tg@mirbsd.org> based on
++ * code from LZMA-Loader with the following copyright note:
++ * Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su>
++ * cache manipulation adapted from Broadcom code
++ * idea taken from original bunzip2 decompressor code
++ * Copyright 2004 Manuel Novoa III <mjn3@codepoet.org>
++ */
++
++/*
++ * This file is supposed to be #include’d where it’s
++ * needed; we will not trash s0, s1, s2, s3.
++ */
++
++#define KSEG0 0x80000000
++
++#define C0_CONFIG $16
++#define C0_TAGLO $28
++#define C0_TAGHI $29
++
++#define CONF1_DA_SHIFT 7 /* D$ associativity */
++#define CONF1_DA_MASK 0x00000380
++#define CONF1_DA_BASE 1
++#define CONF1_DL_SHIFT 10 /* D$ line size */
++#define CONF1_DL_MASK 0x00001c00
++#define CONF1_DL_BASE 2
++#define CONF1_DS_SHIFT 13 /* D$ sets/way */
++#define CONF1_DS_MASK 0x0000e000
++#define CONF1_DS_BASE 64
++#define CONF1_IA_SHIFT 16 /* I$ associativity */
++#define CONF1_IA_MASK 0x00070000
++#define CONF1_IA_BASE 1
++#define CONF1_IL_SHIFT 19 /* I$ line size */
++#define CONF1_IL_MASK 0x00380000
++#define CONF1_IL_BASE 2
++#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
++#define CONF1_IS_MASK 0x01c00000
++#define CONF1_IS_BASE 64
++
++#define Index_Invalidate_I 0x00
++#define Index_Writeback_Inv_D 0x01
++
++ /* Get cache sizes */
++ .set mips32
++ mfc0 s4,C0_CONFIG,1
++ .set mips0
++
++ li s5,CONF1_DL_MASK
++ and s5,s4
++ beq s5,zero,2f
++ nop
++
++ srl s5,CONF1_DL_SHIFT
++ li t0,CONF1_DL_BASE
++ sll s5,t0,s5 /* s5 has D$ cache line size */
++
++ li s6,CONF1_DA_MASK
++ and s6,s4
++ srl s6,CONF1_DA_SHIFT
++ addiu s6,CONF1_DA_BASE /* s6 now has D$ associativity */
++
++ li t0,CONF1_DS_MASK
++ and t0,s4
++ srl t0,CONF1_DS_SHIFT
++ li s7,CONF1_DS_BASE
++ sll s7,s7,t0 /* s7 has D$ sets per way */
++
++ multu s6,s7 /* sets/way * associativity */
++ mflo t0 /* total cache lines */
++
++ multu s5,t0 /* D$ linesize * lines */
++ mflo s6 /* s6 is now D$ size in bytes */
++
++ /* Initilize the D$: */
++ mtc0 zero,C0_TAGLO
++ mtc0 zero,C0_TAGHI
++
++ li t0,KSEG0 /* Just an address for the first $ line */
++ addu t1,t0,s6 /* + size of cache == end */
++
++ .set mips3
++1: cache Index_Writeback_Inv_D,0(t0)
++ .set mips0
++ bne t0,t1,1b
++ addu t0,s5
++
++2:
++ /* Now we get to do it all again for the I$ */
++
++ move s7,zero /* just in case there is no icache */
++ move t8,zero
++
++ li t0,CONF1_IL_MASK
++ and t0,s4
++ beq t0,zero,3f
++ nop
++
++ srl t0,CONF1_IL_SHIFT
++ li s7,CONF1_IL_BASE
++ sll s7,t0 /* s7 has I$ cache line size */
++
++ li t0,CONF1_IA_MASK
++ and t0,s4
++ srl t0,CONF1_IA_SHIFT
++ addiu t8,t0,CONF1_IA_BASE /* t8 now has I$ associativity */
++
++ li t0,CONF1_IS_MASK
++ and t0,s4
++ srl t0,CONF1_IS_SHIFT
++ li t9,CONF1_IS_BASE
++ sll t9,t0 /* t9 has I$ sets per way */
++
++ multu t8,t9 /* sets/way * associativity */
++ mflo t0 /* t8 is now total cache lines */
++
++ multu s7,t0 /* I$ linesize * lines */
++ mflo t8 /* t8 is cache size in bytes */
++
++ /* Initilize the I$: */
++ mtc0 zero,C0_TAGLO
++ mtc0 zero,C0_TAGHI
++
++ li t0,KSEG0 /* Just an address for the first $ line */
++ addu t1,t0,t8 /* + size of cache == end */
++
++ .set mips3
++1: cache Index_Invalidate_I,0(t0)
++ .set mips0
++ bne t0,t1,1b
++ addu t0,s7
++
++3:
+--- /dev/null Thu Jan 6 00:14:18 2011
++++ linux-2.6.36/arch/mips/boot/compressed/selfreloc.lds.S Wed Jan 5 23:52:43 2011
+@@ -0,0 +1,39 @@
++/*-
++ * written 2010 by Thorsten Glaser <tg@debian.org> based on
++ * arch/mips/kernel/vmlinux.lds and arch/mips/boot/compressed/ld.script
++ */
++
++#include <asm/asm-offsets.h>
++#include <asm/page.h>
++#include <asm-generic/vmlinux.lds.h>
++
++#undef mips
++#define mips mips
++OUTPUT_ARCH(mips)
++ENTRY(selfreloc_start)
++PHDRS {
++ text PT_LOAD FLAGS(7); /* RWX */
++}
++SECTIONS
++{
++ . = VMLINUX_LOAD_ADDRESS;
++ .text : {
++ *(.text)
++ *(.text.*)
++ *(.rodata)
++ *(.rodata.*)
++ *(.data)
++ *(.data.*)
++ *(.bss)
++ *(.bss.*)
++ } :text
++ /DISCARD/ : {
++ *(.MIPS.options)
++ *(.options)
++ *(.pdr)
++ *(.reginfo)
++ *(.comment)
++ *(.note)
++ *(.gnu.attributes)
++ }
++}
+--- /dev/null Thu Jan 6 02:10:14 2011
++++ linux-2.6.36/arch/mips/boot/compressed/selfreloc.S Thu Jan 6 01:21:44 2011
+@@ -0,0 +1,60 @@
++/*-
++ * written 2011 by Thorsten Glaser <tg@freewrt.org> based on
++ * arch/mips/boot/compressed/head.S and code from LZMA-Loader
++ */
++
++#include <asm/asm.h>
++#include <asm/regdef.h>
++
++ .set noreorder
++ .cprestore
++
++ .text
++ LEAF(selfreloc_start)
++selfreloc_start:
++ /* Save boot rom start args */
++ move s0, a0
++ move s1, a1
++ move s2, a2
++ move s3, a3
++
++ /* Copy code to the correct place */
++ PTR_LI a0, VMLINUZ_LOAD_ADDRESS
++ PTR_LA a1, imgbeg
++ PTR_LA a2, imgend
++1: lw t0, 0(a1)
++ sw t0, 0(a0)
++ add a1, 4
++ add a0, 4
++ blt a1, a2, 1b
++ nop
++
++ /*
++ * At this point we need to invalidate dcache and
++ * icache before jumping to the new code
++ */
++/* #include "invcache.S" // since this may work only on brcm? */
++
++ /* Restore boot rom start args */
++ move a0, s0
++ move a1, s1
++ move a2, s2
++ move a3, s3
++
++ /* Jump to the code at its new location */
++ PTR_LI k0, VMLINUZ_LOAD_ADDRESS
++ jr k0
++ nop
++
++ /* Just in case we come back… */
++3:
++ b 3b
++ nop
++ END(selfreloc_start)
++
++ .globl imgbeg
++ .p2align 2
++imgbeg: .incbin "vmlinuz.bin"
++ .globl imgend
++ .p2align 2
++imgend:
+--- linux-2.6.36/arch/mips/boot/compressed/Makefile~ Wed Jan 5 21:26:40 2011
++++ linux-2.6.36/arch/mips/boot/compressed/Makefile Wed Jan 5 23:35:58 2011
+@@ -106,4 +107,12 @@ OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFL
+ vmlinuz.srec: vmlinuz
+ $(call cmd,objcopy)
+
+-clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec}
++AFLAGS_selfreloc1.o := -DVMLINUZ_LOAD_ADDRESS=$(VMLINUZ_LOAD_ADDRESS)
++arch/mips/boot/compressed/selfreloc.o: arch/mips/boot/compressed/selfreloc.S vmlinuz.bin arch/mips/boot/compressed/invcache.S
++
++CPPFLAGS_selfreloc.lds := $(KBUILD_CFLAGS)
++
++vmlinub.elf: arch/mips/boot/compressed/selfreloc.oarch/mips/boot/compressed/selfreloc.lds
++ $(LD) $(LDFLAGS) -T arch/mips/boot/compressed/selfreloc.lds arch/mips/boot/compressed/selfreloc.o -o $@
++
++clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec} $(objtree)/vmlinub.elf $(objtree)/arch/mips/boot/compressed/selfreloc.{o,lds}
+--- linux-2.6.36/arch/mips/Makefile~ Wed Jan 5 20:26:12 2011
++++ linux-2.6.36/arch/mips/Makefile Wed Jan 5 22:41:38 2011
+@@ -62,8 +62,13 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vm
+ # Calculate the load address of the compressed kernel image
+ hostprogs-y := calc_vmlinuz_load_addr
+
++ifdef CONFIG_BCM47XX
++# XXX just after CFE, just pray the address is static
++VMLINUZ_LOAD_ADDRESS = 0xffffffff80480000
++else
+ VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
+ $(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
++endif
+
+ vmlinuzobjs-y += $(obj)/piggy.o
+
+@@ -79,6 +79,7 @@ endif
+ all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32)
+ all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64)
+ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz
++all-$(CONFIG_BCM47XX) += vmlinub.elf
+
+ #
+ # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
+@@ -285,7 +286,7 @@ vmlinux.bin vmlinux.ecoff vmlinux.srec:
+ $(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) arch/mips/boot/$@
+
+ # boot/compressed
+-vmlinuz vmlinuz.bin vmlinuz.ecoff vmlinuz.srec: $(vmlinux-32) FORCE
++vmlinuz vmlinuz.bin vmlinuz.ecoff vmlinuz.srec vmlinub.elf: $(vmlinux-32) FORCE
+ $(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
+ VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $@
+
+@@ -322,6 +323,7 @@ define archhelp
+ echo ' vmlinuz.ecoff - ECOFF zboot image'
+ echo ' vmlinuz.bin - Raw binary zboot image'
+ echo ' vmlinuz.srec - SREC zboot image'
++ echo ' vmlinub.elf - ELF self-relocating zboot image'
+ echo
+ echo ' These will be default as apropriate for a configured platform.'
+ endef