From 46b06e9c1c7d57ae0008b3a282110d8ce4345b5f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 25 Aug 2005 23:50:55 +0000 Subject: import different optimized versions of div funcs based upon target sparc arch --- libc/sysdeps/linux/sparc/umul.S | 163 ++-------------------------------------- 1 file changed, 6 insertions(+), 157 deletions(-) (limited to 'libc/sysdeps/linux/sparc/umul.S') diff --git a/libc/sysdeps/linux/sparc/umul.S b/libc/sysdeps/linux/sparc/umul.S index 4f38d78eb..e86059743 100644 --- a/libc/sysdeps/linux/sparc/umul.S +++ b/libc/sysdeps/linux/sparc/umul.S @@ -1,160 +1,9 @@ -/* - * Unsigned multiply. Returns %o0 * %o1 in %o1%o0 (i.e., %o1 holds the - * upper 32 bits of the 64-bit product). - * - * This code optimizes short (less than 13-bit) multiplies. Short - * multiplies require 25 instruction cycles, and long ones require - * 45 instruction cycles. - * - * On return, overflow has occurred (%o1 is not zero) if and only if - * the Z condition code is clear, allowing, e.g., the following: - * - * call .umul - * nop - * bnz overflow (or tnz) - */ +#include "_math_inc.h" -#include - - -.global .umul; -.align 4; -.type .umul ,@function; - -.umul: - or %o0, %o1, %o4 - mov %o0, %y ! multiplier -> Y - andncc %o4, 0xfff, %g0 ! test bits 12..31 of *both* args - be .Lmul_shortway ! if zero, can do it the short way - andcc %g0, %g0, %o4 ! zero the partial product; clear N & V - - /* - * Long multiply. 32 steps, followed by a final shift step. - */ - mulscc %o4, %o1, %o4 ! 1 - mulscc %o4, %o1, %o4 ! 2 - mulscc %o4, %o1, %o4 ! 3 - mulscc %o4, %o1, %o4 ! 4 - mulscc %o4, %o1, %o4 ! 5 - mulscc %o4, %o1, %o4 ! 6 - mulscc %o4, %o1, %o4 ! 7 - mulscc %o4, %o1, %o4 ! 8 - mulscc %o4, %o1, %o4 ! 9 - mulscc %o4, %o1, %o4 ! 10 - mulscc %o4, %o1, %o4 ! 11 - mulscc %o4, %o1, %o4 ! 12 - mulscc %o4, %o1, %o4 ! 13 - mulscc %o4, %o1, %o4 ! 14 - mulscc %o4, %o1, %o4 ! 15 - mulscc %o4, %o1, %o4 ! 16 - mulscc %o4, %o1, %o4 ! 17 - mulscc %o4, %o1, %o4 ! 18 - mulscc %o4, %o1, %o4 ! 19 - mulscc %o4, %o1, %o4 ! 20 - mulscc %o4, %o1, %o4 ! 21 - mulscc %o4, %o1, %o4 ! 22 - mulscc %o4, %o1, %o4 ! 23 - mulscc %o4, %o1, %o4 ! 24 - mulscc %o4, %o1, %o4 ! 25 - mulscc %o4, %o1, %o4 ! 26 - mulscc %o4, %o1, %o4 ! 27 - mulscc %o4, %o1, %o4 ! 28 - mulscc %o4, %o1, %o4 ! 29 - mulscc %o4, %o1, %o4 ! 30 - mulscc %o4, %o1, %o4 ! 31 - mulscc %o4, %o1, %o4 ! 32 - mulscc %o4, %g0, %o4 ! final shift - - /* - * Normally, with the shift-and-add approach, if both numbers are - * positive you get the correct result. With 32-bit two's-complement - * numbers, -x is represented as - * - * x 32 - * ( 2 - ------ ) mod 2 * 2 - * 32 - * 2 - * - * (the `mod 2' subtracts 1 from 1.bbbb). To avoid lots of 2^32s, - * we can treat this as if the radix point were just to the left - * of the sign bit (multiply by 2^32), and get - * - * -x = (2 - x) mod 2 - * - * Then, ignoring the `mod 2's for convenience: - * - * x * y = xy - * -x * y = 2y - xy - * x * -y = 2x - xy - * -x * -y = 4 - 2x - 2y + xy - * - * For signed multiplies, we subtract (x << 32) from the partial - * product to fix this problem for negative multipliers (see mul.s). - * Because of the way the shift into the partial product is calculated - * (N xor V), this term is automatically removed for the multiplicand, - * so we don't have to adjust. - * - * But for unsigned multiplies, the high order bit wasn't a sign bit, - * and the correction is wrong. So for unsigned multiplies where the - * high order bit is one, we end up with xy - (y << 32). To fix it - * we add y << 32. - */ -#if 0 - tst %o1 - bl,a 1f ! if %o1 < 0 (high order bit = 1), - add %o4, %o0, %o4 ! %o4 += %o0 (add y to upper half) -1: rd %y, %o0 ! get lower half of product - retl - addcc %o4, %g0, %o1 ! put upper half in place and set Z for %o1==0 +#if defined(__CONFIG_SPARC_V9__) || defined(__CONFIG_SPARC_V9B__) +# include "sparcv9/umul.S" +#elif defined(__CONFIG_SPARC_V8__) +# include "sparcv8/umul.S" #else - /* Faster code from tege@sics.se. */ - sra %o1, 31, %o2 ! make mask from sign bit - and %o0, %o2, %o2 ! %o2 = 0 or %o0, depending on sign of %o1 - rd %y, %o0 ! get lower half of product - retl - addcc %o4, %o2, %o1 ! add compensation and put upper half in place +# include "sparcv7/umul.S" #endif - -.Lmul_shortway: - /* - * Short multiply. 12 steps, followed by a final shift step. - * The resulting bits are off by 12 and (32-12) = 20 bit positions, - * but there is no problem with %o0 being negative (unlike above), - * and overflow is impossible (the answer is at most 24 bits long). - */ - mulscc %o4, %o1, %o4 ! 1 - mulscc %o4, %o1, %o4 ! 2 - mulscc %o4, %o1, %o4 ! 3 - mulscc %o4, %o1, %o4 ! 4 - mulscc %o4, %o1, %o4 ! 5 - mulscc %o4, %o1, %o4 ! 6 - mulscc %o4, %o1, %o4 ! 7 - mulscc %o4, %o1, %o4 ! 8 - mulscc %o4, %o1, %o4 ! 9 - mulscc %o4, %o1, %o4 ! 10 - mulscc %o4, %o1, %o4 ! 11 - mulscc %o4, %o1, %o4 ! 12 - mulscc %o4, %g0, %o4 ! final shift - - /* - * %o4 has 20 of the bits that should be in the result; %y has - * the bottom 12 (as %y's top 12). That is: - * - * %o4 %y - * +----------------+----------------+ - * | -12- | -20- | -12- | -20- | - * +------(---------+------)---------+ - * -----result----- - * - * The 12 bits of %o4 left of the `result' area are all zero; - * in fact, all top 20 bits of %o4 are zero. - */ - - rd %y, %o5 - sll %o4, 12, %o0 ! shift middle bits left 12 - srl %o5, 20, %o5 ! shift low bits right 20 - or %o5, %o0, %o0 - retl - addcc %g0, %g0, %o1 ! %o1 = zero, and set Z - -.size .umul , . -.umul -- cgit v1.2.3