From 8f298a7c3593d6bdc29f45d9c5eda5a5503812f4 Mon Sep 17 00:00:00 2001 From: Bernhard Reutner-Fischer Date: Wed, 3 Mar 2010 21:38:49 +0100 Subject: pull kernel-features.h from NPTL Signed-off-by: Bernhard Reutner-Fischer --- libc/sysdeps/linux/common/bits/kernel-features.h | 410 ++++++++++++++++++++++- 1 file changed, 392 insertions(+), 18 deletions(-) (limited to 'libc/sysdeps/linux/common/bits/kernel-features.h') diff --git a/libc/sysdeps/linux/common/bits/kernel-features.h b/libc/sysdeps/linux/common/bits/kernel-features.h index b04ad6d3e..68b881c09 100644 --- a/libc/sysdeps/linux/common/bits/kernel-features.h +++ b/libc/sysdeps/linux/common/bits/kernel-features.h @@ -26,7 +26,25 @@ #endif #include -#define __LINUX_KERNEL_VERSION LINUX_VERSION_CODE +#define __LINUX_KERNEL_VERSION LINUX_VERSION_CODE + +/* We assume for __LINUX_KERNEL_VERSION the same encoding used in + linux/version.h. I.e., the major, minor, and subminor all get a + byte with the major number being in the highest byte. This means + we can do numeric comparisons. + + In the following we will define certain symbols depending on + whether the describes kernel feature is available in the kernel + version given by __LINUX_KERNEL_VERSION. We are not always exactly + recording the correct versions in which the features were + introduced. If somebody cares these values can afterwards be + corrected. Most of the numbers here are set corresponding to + 2.2.0. */ + +/* `getcwd' system call. */ +#if __LINUX_KERNEL_VERSION >= 131584 +# define __ASSUME_GETCWD_SYSCALL 1 +#endif /* When was `poll' introduced? */ #if __LINUX_KERNEL_VERSION >= 131584 @@ -38,16 +56,101 @@ # define __ASSUME_REALTIME_SIGNALS 1 #endif -/* Beginning with 2.5.63 support for realtime and monotonic clocks and - timers based on them is available. */ -#if __LINUX_KERNEL_VERSION >= 132415 -# define __ASSUME_POSIX_TIMERS 1 +/* When were the `pread'/`pwrite' syscalls introduced? */ +#if __LINUX_KERNEL_VERSION >= 131584 +# define __ASSUME_PREAD_SYSCALL 1 +# define __ASSUME_PWRITE_SYSCALL 1 #endif -/* On x86, the set_thread_area syscall was introduced in 2.5.29, but its - semantics was changed in 2.5.30, and again after 2.5.31. */ -#if __LINUX_KERNEL_VERSION >= 132384 && defined __i386__ -# define __ASSUME_SET_THREAD_AREA_SYSCALL 1 +/* When was `poll' introduced? */ +#if __LINUX_KERNEL_VERSION >= 131584 +# define __ASSUME_POLL_SYSCALL 1 +#endif + +/* The `lchown' syscall was introduced in 2.1.80. */ +#if __LINUX_KERNEL_VERSION >= 131408 +# define __ASSUME_LCHOWN_SYSCALL 1 +#endif + +/* When did the `setresuid' sysall became available? */ +#if __LINUX_KERNEL_VERSION >= 131584 && !defined __sparc__ +# define __ASSUME_SETRESUID_SYSCALL 1 +#endif + +/* The SIOCGIFNAME ioctl is available starting with 2.1.50. */ +#if __LINUX_KERNEL_VERSION >= 131408 +# define __ASSUME_SIOCGIFNAME 1 +#endif + +/* MSG_NOSIGNAL was at least available with Linux 2.2.0. */ +#if __LINUX_KERNEL_VERSION >= 131584 +# define __ASSUME_MSG_NOSIGNAL 1 +#endif + +/* On x86 another `getrlimit' syscall was added in 2.3.25. */ +#if __LINUX_KERNEL_VERSION >= 131865 && defined __i386__ +# define __ASSUME_NEW_GETRLIMIT_SYSCALL 1 +#endif + +/* On x86 the truncate64/ftruncate64 syscalls were introduced in 2.3.31. */ +#if __LINUX_KERNEL_VERSION >= 131871 && defined __i386__ +# define __ASSUME_TRUNCATE64_SYSCALL 1 +#endif + +/* On x86 the mmap2 syscall was introduced in 2.3.31. */ +#if __LINUX_KERNEL_VERSION >= 131871 && defined __i386__ +# define __ASSUME_MMAP2_SYSCALL 1 +#endif + +/* On x86 the stat64/lstat64/fstat64 syscalls were introduced in 2.3.34. */ +#if __LINUX_KERNEL_VERSION >= 131874 && defined __i386__ +# define __ASSUME_STAT64_SYSCALL 1 +#endif + +/* On sparc and ARM the truncate64/ftruncate64/mmap2/stat64/lstat64/fstat64 + syscalls were introduced in 2.3.35. */ +#if __LINUX_KERNEL_VERSION >= 131875 && (defined __sparc__ || defined __arm__) +# define __ASSUME_TRUNCATE64_SYSCALL 1 +# define __ASSUME_MMAP2_SYSCALL 1 +# define __ASSUME_STAT64_SYSCALL 1 +#endif + +/* I know for sure that getrlimit are in 2.3.35 on powerpc. */ +#if __LINUX_KERNEL_VERSION >= 131875 && defined __powerpc__ +# define __ASSUME_NEW_GETRLIMIT_SYSCALL 1 +#endif + +/* I know for sure that these are in 2.3.35 on powerpc. But PowerPC64 does not + support separate 64-bit syscalls, already 64-bit */ +#if __LINUX_KERNEL_VERSION >= 131875 && defined __powerpc__ \ + && !defined __powerpc64__ +# define __ASSUME_TRUNCATE64_SYSCALL 1 +# define __ASSUME_STAT64_SYSCALL 1 +#endif + +/* Linux 2.3.39 introduced 32bit UID/GIDs. Some platforms had 32 + bit type all along. */ +#if __LINUX_KERNEL_VERSION >= 131879 || defined __powerpc__ || defined __mips__ +# define __ASSUME_32BITUIDS 1 +#endif + +/* Linux 2.3.39 sparc added setresuid. */ +#if __LINUX_KERNEL_VERSION >= 131879 && defined __sparc__ +# define __ASSUME_SETRESUID_SYSCALL 1 +#endif + +#if __LINUX_KERNEL_VERSION >= 131879 +# define __ASSUME_SETRESGID_SYSCALL 1 +#endif + +/* Linux 2.3.39 introduced IPC64. Except for powerpc. */ +#if __LINUX_KERNEL_VERSION >= 131879 && !defined __powerpc__ +# define __ASSUME_IPC64 1 +#endif + +/* MIPS platforms had IPC64 all along. */ +#if defined __mips__ +# define __ASSUME_IPC64 1 #endif /* We can use the LDTs for threading with Linux 2.3.99 and newer. */ @@ -55,6 +158,74 @@ # define __ASSUME_LDT_WORKS 1 #endif +/* Linux 2.4.0 on PPC introduced a correct IPC64. But PowerPC64 does not + support a separate 64-bit sys call, already 64-bit */ +#if __LINUX_KERNEL_VERSION >= 132096 && defined __powerpc__ \ + && !defined __powerpc64__ +# define __ASSUME_IPC64 1 +#endif + +/* SH kernels got stat64, mmap2, and truncate64 during 2.4.0-test. */ +#if __LINUX_KERNEL_VERSION >= 132096 && defined __sh__ +# define __ASSUME_TRUNCATE64_SYSCALL 1 +# define __ASSUME_MMAP2_SYSCALL 1 +# define __ASSUME_STAT64_SYSCALL 1 +#endif + +/* The changed st_ino field appeared in 2.4.0-test6. But we cannot + distinguish this version from other 2.4.0 releases. Therefore play + save and assume it available is for 2.4.1 and up. However, SH is lame, + and still does not have a 64-bit inode field. */ +#if __LINUX_KERNEL_VERSION >= 132097 && !defined __alpha__ && !defined __sh__ +# define __ASSUME_ST_INO_64_BIT 1 +#endif + +/* To support locking of large files a new fcntl() syscall was introduced + in 2.4.0-test7. We test for 2.4.1 for the earliest version we know + the syscall is available. */ +#if __LINUX_KERNEL_VERSION >= 132097 && (defined __i386__ || defined __sparc__) +# define __ASSUME_FCNTL64 1 +#endif + +/* The AT_CLKTCK auxiliary vector entry was introduction in the 2.4.0 + series. */ +#if __LINUX_KERNEL_VERSION >= 132097 +# define __ASSUME_AT_CLKTCK 1 +#endif + +/* Arm got fcntl64 in 2.4.4, PowerPC and SH have it also in 2.4.4 (I + don't know when it got introduced). But PowerPC64 does not support + separate FCNTL64 call, FCNTL is already 64-bit */ +#if __LINUX_KERNEL_VERSION >= 132100 \ + && (defined __arm__ || defined __powerpc__ || defined __sh__) \ + && !defined __powerpc64__ +# define __ASSUME_FCNTL64 1 +#endif + +/* The getdents64 syscall was introduced in 2.4.0-test7. We test for + 2.4.1 for the earliest version we know the syscall is available. */ +#if __LINUX_KERNEL_VERSION >= 132097 +# define __ASSUME_GETDENTS64_SYSCALL 1 +#endif + +/* When did O_DIRECTORY became available? Early in 2.3 but when? + Be safe, use 2.3.99. */ +#if __LINUX_KERNEL_VERSION >= 131939 +# define __ASSUME_O_DIRECTORY 1 +#endif + +/* Starting with one of the 2.4.0 pre-releases the Linux kernel passes + up the page size information. */ +#if __LINUX_KERNEL_VERSION >= 132097 +# define __ASSUME_AT_PAGESIZE 1 +#endif + +/* Starting with at least 2.4.0 the kernel passes the uid/gid unconditionally + up to the child. */ +#if __LINUX_KERNEL_VERSION >= 132097 +# define __ASSUME_AT_XID 1 +#endif + /* Starting with 2.4.5 kernels PPC passes the AUXV in the standard way and the vfork syscall made it into the official kernel. */ #if __LINUX_KERNEL_VERSION >= (132096+5) && defined __powerpc__ @@ -62,17 +233,72 @@ # define __ASSUME_VFORK_SYSCALL 1 #endif +/* Starting with 2.4.5 kernels the mmap2 syscall made it into the official + kernel. But PowerPC64 does not support a separate MMAP2 call. */ +#if __LINUX_KERNEL_VERSION >= (132096+5) && defined __powerpc__ \ + && !defined __powerpc64__ +# define __ASSUME_MMAP2_SYSCALL 1 +#endif + +/* Starting with 2.4.21 PowerPC implements the new prctl syscall. + This allows applications to get/set the Floating Point Exception Mode. */ +#if __LINUX_KERNEL_VERSION >= (132096+21) && defined __powerpc__ +# define __ASSUME_NEW_PRCTL_SYSCALL 1 +#endif + +/* Starting with 2.4.21 the PowerPC32 clone syscall works as expected. */ +#if __LINUX_KERNEL_VERSION >= (132096+21) && defined __powerpc__ \ + && !defined __powerpc64__ +# define __ASSUME_FIXED_CLONE_SYSCALL 1 +#endif + +/* Starting with 2.4.21 PowerPC64 implements the new rt_sigreturn syscall. + The new rt_sigreturn takes an ucontext pointer allowing rt_sigreturn + to be used in the set/swapcontext implementation. */ +#if __LINUX_KERNEL_VERSION >= (132096+21) && defined __powerpc64__ +# define __ASSUME_NEW_RT_SIGRETURN_SYSCALL 1 +#endif + +/* On x86, the set_thread_area syscall was introduced in 2.5.29, but its + semantics was changed in 2.5.30, and again after 2.5.31. */ +#if __LINUX_KERNEL_VERSION >= 132384 && defined __i386__ +# define __ASSUME_SET_THREAD_AREA_SYSCALL 1 +#endif + /* The vfork syscall on x86 and arm was definitely available in 2.4. */ #if __LINUX_KERNEL_VERSION >= 132097 && (defined __i386__ || defined __arm__) # define __ASSUME_VFORK_SYSCALL 1 #endif -/* Starting with version 2.6.4-rc1 the getdents syscall returns d_type - * information as well and in between 2.6.5 and 2.6.8 most compat wrappers - * were fixed too. Except s390{,x} which was fixed in 2.6.11. */ -#if (__LINUX_KERNEL_VERSION >= 0x020608 && !defined __s390__) \ - || (__LINUX_KERNEL_VERSION >= 0x02060b && defined __s390__) -# define __ASSUME_GETDENTS32_D_TYPE 1 +/* There are an infinite number of PA-RISC kernel versions numbered + 2.4.0. But they've not really been released as such. We require + and expect the final version here. */ +#ifdef __hppa__ +# define __ASSUME_32BITUIDS 1 +# define __ASSUME_TRUNCATE64_SYSCALL 1 +# define __ASSUME_MMAP2_SYSCALL 1 +# define __ASSUME_STAT64_SYSCALL 1 +# define __ASSUME_IPC64 1 +# define __ASSUME_ST_INO_64_BIT 1 +# define __ASSUME_FCNTL64 1 +# define __ASSUME_GETDENTS64_SYSCALL 1 +#endif + +/* Alpha switched to a 64-bit timeval sometime before 2.2.0. */ +#if __LINUX_KERNEL_VERSION >= 131584 && defined __alpha__ +# define __ASSUME_TIMEVAL64 1 +#endif + +#if defined __mips__ && _MIPS_SIM == _ABIN32 +# define __ASSUME_FCNTL64 1 +#endif + +/* The late 2.5 kernels saw a lot of new CLONE_* flags. Summarize + their availability with one define. The changes were made first + for i386 and the have to be done separately for the other archs. + For i386 we pick 2.5.50 as the first version with support. */ +#if __LINUX_KERNEL_VERSION >= 132402 && defined __i386__ +# define __ASSUME_CLONE_THREAD_FLAGS 1 #endif /* Support for various CLOEXEC and NONBLOCK flags was added for x86, @@ -92,7 +318,155 @@ # define __ASSUME_VFORK_SYSCALL 1 #endif -/* This header was added somewhere around 2.6.13 */ -#if __LINUX_KERNEL_VERSION >= 132621 -# define HAVE_LINUX_CPUMASK_H 1 +/* Beginning with 2.5.63 support for realtime and monotonic clocks and + timers based on them is available. */ +#if __LINUX_KERNEL_VERSION >= 132415 +# define __ASSUME_POSIX_TIMERS 1 +#endif + +/* Beginning with 2.6.12 the clock and timer supports CPU clocks. */ +#if __LINUX_KERNEL_VERSION >= 0x2060c +# define __ASSUME_POSIX_CPU_TIMERS 1 +#endif + +/* The late 2.5 kernels saw a lot of new CLONE_* flags. Summarize + their availability with one define. The changes were made first + for i386 and the have to be done separately for the other archs. + For ia64, s390*, PPC, x86-64 we pick 2.5.64 as the first version + with support. */ +#if __LINUX_KERNEL_VERSION >= 132416 \ + && (defined __ia64__ || defined __s390__ || defined __powerpc__ \ + || defined __x86_64__ || defined __sh__) +# define __ASSUME_CLONE_THREAD_FLAGS 1 +#endif + +/* With kernel 2.4.17 we always have netlink support. */ +#if __LINUX_KERNEL_VERSION >= (132096+17) +# define __ASSUME_NETLINK_SUPPORT 1 +#endif + +/* The requeue futex functionality was introduced in 2.5.70. */ +#if __LINUX_KERNEL_VERSION >= 132422 +# define __ASSUME_FUTEX_REQUEUE 1 +#endif + +/* The statfs64 syscalls are available in 2.5.74. */ +#if __LINUX_KERNEL_VERSION >= 132426 +# define __ASSUME_STATFS64 1 +#endif + +/* Starting with at least 2.5.74 the kernel passes the setuid-like exec + flag unconditionally up to the child. */ +#if __LINUX_KERNEL_VERSION >= 132426 +# define __ASSUME_AT_SECURE 1 +#endif + +/* Starting with the 2.5.75 kernel the kernel fills in the correct value + in the si_pid field passed as part of the siginfo_t struct to signal + handlers. */ +#if __LINUX_KERNEL_VERSION >= 132427 +# define __ASSUME_CORRECT_SI_PID 1 +#endif + +/* The tgkill syscall was instroduced for i386 in 2.5.75. For Alpha + it was introduced in 2.6.0-test1 which unfortunately cannot be + distinguished from 2.6.0. On x86-64, ppc, and ppc64 it was + introduced in 2.6.0-test3. */ +#if (__LINUX_KERNEL_VERSION >= 132427 && defined __i386__) \ + || (__LINUX_KERNEL_VERSION >= 132609 && defined __alpha__) \ + || (__LINUX_KERNEL_VERSION >= 132609 && defined __x86_64__) \ + || (__LINUX_KERNEL_VERSION >= 132609 && defined __powerpc__) \ + || (__LINUX_KERNEL_VERSION >= 132609 && defined __sh__) +# define __ASSUME_TGKILL 1 +#endif + +/* The utimes syscall has been available for some architectures + forever. For x86 it was introduced after 2.5.75, for x86-64, + ppc, and ppc64 it was introduced in 2.6.0-test3. */ +#if defined __alpha__ || defined __ia64__ || defined __hppa__ \ + || defined __sparc__ \ + || (__LINUX_KERNEL_VERSION > 132427 && defined __i386__) \ + || (__LINUX_KERNEL_VERSION > 132609 && defined __x86_64__) \ + || (__LINUX_KERNEL_VERSION >= 132609 && defined __powerpc__) \ + || (__LINUX_KERNEL_VERSION >= 132609 && defined __sh__) +# define __ASSUME_UTIMES 1 #endif + +// XXX Disabled for now since the semantics we want is not achieved. +#if 0 +/* The CLONE_STOPPED flag was introduced in the 2.6.0-test1 series. */ +#if __LINUX_KERNEL_VERSION >= 132609 +# define __ASSUME_CLONE_STOPPED 1 +#endif +#endif + +/* The fixed version of the posix_fadvise64 syscall appeared in + 2.6.0-test3. At least for x86. Powerpc support appeared in + 2.6.2, but for 32-bit userspace only. */ +#if (__LINUX_KERNEL_VERSION >= 132609 && defined __i386__) \ + || (__LINUX_KERNEL_VERSION >= 132610 && defined __powerpc__ \ + && !defined __powerpc64__) +# define __ASSUME_FADVISE64_64_SYSCALL 1 +#endif + +/* The PROT_GROWSDOWN/PROT_GROWSUP flags were introduced in the 2.6.0-test + series. */ +#if __LINUX_KERNEL_VERSION >= 132609 +# define __ASSUME_PROT_GROWSUPDOWN 1 +#endif + +/* Starting with 2.6.0 PowerPC adds signal/swapcontext support for Vector + SIMD (AKA Altivec, VMX) instructions and register state. This changes + the overall size of the sigcontext and adds the swapcontext syscall. */ +#if __LINUX_KERNEL_VERSION >= 132608 && defined __powerpc__ +# define __ASSUME_SWAPCONTEXT_SYSCALL 1 +#endif + +/* The CLONE_DETACHED flag is not necessary in 2.6.2 kernels, it is + implied. */ +#if __LINUX_KERNEL_VERSION >= 132610 +# define __ASSUME_NO_CLONE_DETACHED 1 +#endif + +/* Starting with version 2.6.4-rc1 the getdents syscall returns d_type + information as well and in between 2.6.5 and 2.6.8 most compat wrappers + were fixed too. Except s390{,x} which was fixed in 2.6.11. */ +#if (__LINUX_KERNEL_VERSION >= 0x020608 && !defined __s390__) \ + || (__LINUX_KERNEL_VERSION >= 0x02060b && defined __s390__) +# define __ASSUME_GETDENTS32_D_TYPE 1 +#endif + +/* Starting with version 2.5.3, the initial location returned by `brk' + after exec is always rounded up to the next page. */ +#if __LINUX_KERNEL_VERSION >= 132355 +# define __ASSUME_BRK_PAGE_ROUNDED 1 +#endif + +/* Starting with version 2.6.9, the waitid system call is available. + Except for powerpc and powerpc64, where it is available in 2.6.12. */ +#if (__LINUX_KERNEL_VERSION >= 0x020609 && !defined __powerpc__) \ + || (__LINUX_KERNEL_VERSION >= 0x02060c && defined __powerpc__) +# define __ASSUME_WAITID_SYSCALL 1 +#endif + +/* Starting with version 2.6.9, SSI_IEEE_RAISE_EXCEPTION exists. */ +#if __LINUX_KERNEL_VERSION >= 0x020609 && defined __alpha__ +#define __ASSUME_IEEE_RAISE_EXCEPTION 1 +#endif + +/* Support for the FUTEX_CLOCK_REALTIME flag was added in 2.6.29. */ +#if __LINUX_KERNEL_VERSION >= 0x02061d +# define __ASSUME_FUTEX_CLOCK_REALTIME 1 +#endif + +/* Support for PI futexes was added in 2.6.18. */ +#if __LINUX_KERNEL_VERSION >= 0x020612 +# define __ASSUME_FUTEX_LOCK_PI 1 +#endif + +/* Support for private futexes was added in 2.6.22. */ +#if __LINUX_KERNEL_VERSION >= 0x020616 +# define __ASSUME_PRIVATE_FUTEX 1 +#endif + + -- cgit v1.2.3