From 8dc1d08d0c3a5abe3856b04a5a864227fe0ba62d Mon Sep 17 00:00:00 2001 From: Eric Andersen Date: Sat, 2 Feb 2002 19:03:57 +0000 Subject: Add in support for the Hitach H8/300H architecture, contributed by Yoshinori Sato --- extra/Configs/Config.h8300 | 195 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 extra/Configs/Config.h8300 (limited to 'extra/Configs/Config.h8300') diff --git a/extra/Configs/Config.h8300 b/extra/Configs/Config.h8300 new file mode 100644 index 000000000..56d0ef3a2 --- /dev/null +++ b/extra/Configs/Config.h8300 @@ -0,0 +1,195 @@ +# Library Configuration rules for uClibc +# +# This file contains rules which are shared between multiple Makefiles. All +# normal configuration options live in the file named "Config". You probably +# should not mess with this file unless you know what you are doing... +# +# Copyright (C) 2002 Erik Andersen +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of the GNU Library General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) any +# later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more +# details. +# +# You should have received a copy of the GNU Library General Public License +# along with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# Derived in part from the Linux-8086 C library, the GNU C Library, and several +# other sundry sources. Files within this library are copyright by their +# respective copyright holders. + +# What arch do you want to compile for... +#TARGET_ARCH=arm +#TARGET_ARCH=i386 +#TARGET_ARCH=m68k +#TARGET_ARCH=powerpc +#TARGET_ARCH=sh +#TARGET_ARCH=sparc +TARGET_ARCH=h8300 + +# If you are running a cross compiler, you may want to set this +# to something more interesting... +NATIVE_CC = gcc +CROSS = h8300-hitachi-hms- +CC = $(CROSS)gcc +AR = $(CROSS)ar +LD = $(CROSS)ld +NM = $(CROSS)nm +STRIPTOOL = $(CROSS)strip +#STRIPTOOL = /bin/true + +# Set the following to `true' to make a debuggable build, and `false' for +# production builds. +DODEBUG = false + +# Compiler warnings you want to see +WARNINGS=-Wall + +# Note that the kernel source you use to compile with should be the same as the +# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary +# compatibility across kernel versions. So don't expect, for example, uClibc +# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x +# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, +# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't +# work at all. You have been warned. +KERNEL_SOURCE=/opt/uClinux/linux + +# Set this to `false' if your CPU doesn't have a memory management unit (MMU). +# Set it to `true' otherwise. +HAS_MMU = false + +# Set this to `false' if you don't have/need basic floating point support +# support in libc (strtod, printf, scanf). Set it to `true' otherwise. +# If this is not true, then libm will not be built. +HAS_FLOATING_POINT = true + +# Set to `true' if you want the math library to contain the full set +# of C99 math library features. Costs an extra 35k or so on x86. +DO_C99_MATH = false + +# Set this to `false' if you don't have/need "(unsigned) long long int" support. +# Set it to `true' otherwise. +# Affects *printf and *scanf functions. +# Also omits strto(u)ll, and (u)lltostr from the library if `false'. +HAS_LONG_LONG = true + +# Set this to `false' if you don't have/need locale support; `true' otherwise. +# Note: Currently only affects the ctype functions. You must also generate +# a locale file for anything but the C locale. See directory extra/locale for +# a utility to do so. Also see the following option. +HAS_LOCALE = false + +# Set this to the path of your uClibc locale file directory. +# Warning! This must be different than the glibc locale directory to avoid +# name conflicts, as the locale files are entirely different in format! +LOCALE_DIR = "/usr/share/uClibc-locale/" + +# This specifies which malloc implementation is used. +# "malloc-simple" is very, very small, but is also very, very dumb +# and does not try to make good use of memory or clean up after itself. +# +# "malloc" on the other hand is a bit bigger, but is pretty smart thereby +# minimizing memory wastage and reusing already allocated memory. This +# can be lots faster and safer IMHO. +# +# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. +# It is actually smaller than "malloc", at least on i386. Right now, it +# only works on i386 (and maybe m68k) because it needs sbrk. +MALLOC = malloc-simple +#MALLOC = malloc +#MALLOC = malloc-930716 + +# If you want to collect common syscall code into one function, set to this to +# `true'. Set it to false otherwise. +# On i386 this saves about than 2.8k over all syscalls. +# The idea came from the implementation in dietlibc. +# At present, only affects i386. +UNIFIED_SYSCALL = false + +# If you want large file summit support (greater then 2 Gib), +# turn this on. This has no effect unless your kernel supports +# lfs. This currently does nothing, but may someday... +DOLFS = false + +# If you want to include RPC support, enable this. RPC is almost never used +# for anything except NFS support, so unless you plan to use NFS, leave this +# disabled. This is off by default. +INCLUDE_RPC = true + +# If you want to include support for the next version of the Internet +# Protocol: IP version 6, enable this. This is off by default. +INCLUDE_IPV6 = false + +# If you want to compile the library as PIC code, turn this on. +DOPIC = false + +# +# ARCH_CFLAGS if your have something special to add to the CFLAGS +# +ARCH_CFLAGS = -mh -mint32 -fsigned-char +# +# this is needed for 2.4 m68knommu builds +# +ARCH_CFLAGS2 = -I$(KERNEL_SOURCE)/include +# +# get this from elsewhere, maybe +# +OPTIMIZATION = $(DEBUG_CFLAGS) + +# This is a COFF compiler (ick), so disable all the cool stuff +HAVE_ELF = false + + + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = false + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=false + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. +# +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ +# lib/ +# include/ +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-coff + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = / + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = + -- cgit v1.2.3