From 1e692cc0c53202b932eedabd0315107910c5b093 Mon Sep 17 00:00:00 2001
From: Phil Sutter <phil@nwl.cc>
Date: Tue, 13 May 2014 00:08:54 +0200
Subject: [PATCH] mtd: add rb4xx nand driver
---
drivers/mtd/nand/Kconfig | 4 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/rb4xx_nand.c | 305 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 310 insertions(+)
create mode 100644 drivers/mtd/nand/rb4xx_nand.c
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 90ff447..bb01309 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -510,4 +510,8 @@ config MTD_NAND_XWAY
Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
to the External Bus Unit (EBU).
+config MTD_NAND_RB4XX
+ tristate "NAND flash driver for RouterBoard 4xx series"
+ depends on MTD_NAND && ATH79_MACH_RB4XX
+
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 542b568..e2b5e1c 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
diff --git a/drivers/mtd/nand/rb4xx_nand.c b/drivers/mtd/nand/rb4xx_nand.c
new file mode 100644
index 0000000..5b9841b
--- /dev/null
+++ b/drivers/mtd/nand/rb4xx_nand.c
@@ -0,0 +1,305 @@
+/*
+ * NAND flash driver for the MikroTik RouterBoard 4xx series
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This file was based on the driver for Linux 2.6.22 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/rb4xx_cpld.h>
+
+#define DRV_NAME "rb4xx-nand"
+#define DRV_VERSION "0.2.0"
+#define DRV_DESC "NAND flash driver for RouterBoard 4xx series"
+
+#define RB4XX_NAND_GPIO_READY 5
+#define RB4XX_NAND_GPIO_ALE 37
+#define RB4XX_NAND_GPIO_CLE 38
+#define RB4XX_NAND_GPIO_NCE 39
+
+struct rb4xx_nand_info {
+ struct nand_chip chip;
+ struct mtd_info mtd;
+};
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.
+ */
+static struct nand_ecclayout rb4xx_nand_ecclayout = {
+ .eccbytes = 6,
+ .eccpos = { 8, 9, 10, 13, 14, 15 },
+ .oobavail = 9,
+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static struct mtd_partition rb4xx_nand_partitions[] = {
+ {
+ .name = "booter",
+ .offset = 0,
+ .size = (256 * 1024),
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = (256 * 1024),
+ .size = (4 * 1024 * 1024) - (256 * 1024),
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static int rb4xx_nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY);
+}
+
+static void rb4xx_nand_write_cmd(unsigned char cmd)
+{
+ unsigned char data = cmd;
+ int err;
+
+ err = rb4xx_cpld_write(&data, 1);
+ if (err)
+ pr_err("rb4xx_nand: write cmd failed, err=%d\n", err);
+}
+
+static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (ctrl & NAND_CTRL_CHANGE) {
+ gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE,
+ (ctrl & NAND_CLE) ? 1 : 0);
+ gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE,
+ (ctrl & NAND_ALE) ? 1 : 0);
+ gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE,
+ (ctrl & NAND_NCE) ? 0 : 1);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ rb4xx_nand_write_cmd(cmd);
+}
+
+static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd)
+{
+ unsigned char data = 0;
+ int err;
+
+ err = rb4xx_cpld_read(&data, NULL, 1);
+ if (err) {
+ pr_err("rb4xx_nand: read data failed, err=%d\n", err);
+ data = 0xff;
+ }
+
+ return data;
+}
+
+static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf,
+ int len)
+{
+ int err;
+
+ err = rb4xx_cpld_write(buf, len);
+ if (err)
+ pr_err("rb4xx_nand: write buf failed, err=%d\n", err);
+}
+
+static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf,
+ int len)
+{
+ int err;
+
+ err = rb4xx_cpld_read(buf, NULL, len);
+ if (err)
+ pr_err("rb4xx_nand: read buf failed, err=%d\n", err);
+}
+
+static int rb4xx_nand_probe(struct platform_device *pdev)
+{
+ struct rb4xx_nand_info *info;
+ int ret;
+
+ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+
+ ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request gpio %d\n",
+ RB4XX_NAND_GPIO_READY);
+ goto err;
+ }
+
+ ret = gpio_direction_input(RB4XX_NAND_GPIO_READY);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set input mode on gpio %d\n",
+ RB4XX_NAND_GPIO_READY);
+ goto err_free_gpio_ready;
+ }
+
+ ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request gpio %d\n",
+ RB4XX_NAND_GPIO_ALE);
+ goto err_free_gpio_ready;
+ }
+
+ ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
+ RB4XX_NAND_GPIO_ALE);
+ goto err_free_gpio_ale;
+ }
+
+ ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request gpio %d\n",
+ RB4XX_NAND_GPIO_CLE);
+ goto err_free_gpio_ale;
+ }
+
+ ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
+ RB4XX_NAND_GPIO_CLE);
+ goto err_free_gpio_cle;
+ }
+
+ ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE");
+ if (ret) {
+ dev_err(&pdev->dev, "unable to request gpio %d\n",
+ RB4XX_NAND_GPIO_NCE);
+ goto err_free_gpio_cle;
+ }
+
+ ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
+ RB4XX_NAND_GPIO_ALE);
+ goto err_free_gpio_nce;
+ }
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n");
+ ret = -ENOMEM;
+ goto err_free_gpio_nce;
+ }
+
+ info->chip.priv = &info;
+ info->mtd.priv = &info->chip;
+ info->mtd.owner = THIS_MODULE;
+
+ info->chip.cmd_ctrl = rb4xx_nand_cmd_ctrl;
+ info->chip.dev_ready = rb4xx_nand_dev_ready;
+ info->chip.read_byte = rb4xx_nand_read_byte;
+ info->chip.write_buf = rb4xx_nand_write_buf;
+ info->chip.read_buf = rb4xx_nand_read_buf;
+
+ info->chip.chip_delay = 25;
+ info->chip.ecc.mode = NAND_ECC_SOFT;
+
+ platform_set_drvdata(pdev, info);
+
+ ret = nand_scan_ident(&info->mtd, 1, NULL);
+ if (ret) {
+ ret = -ENXIO;
+ goto err_free_info;
+ }
+
+ if (info->mtd.writesize == 512)
+ info->chip.ecc.layout = &rb4xx_nand_ecclayout;
+
+ ret = nand_scan_tail(&info->mtd);
+ if (ret) {
+ return -ENXIO;
+ goto err_set_drvdata;
+ }
+
+ mtd_device_register(&info->mtd, rb4xx_nand_partitions,
+ ARRAY_SIZE(rb4xx_nand_partitions));
+ if (ret)
+ goto err_release_nand;
+
+ return 0;
+
+err_release_nand:
+ nand_release(&info->mtd);
+err_set_drvdata:
+ platform_set_drvdata(pdev, NULL);
+err_free_info:
+ kfree(info);
+err_free_gpio_nce:
+ gpio_free(RB4XX_NAND_GPIO_NCE);
+err_free_gpio_cle:
+ gpio_free(RB4XX_NAND_GPIO_CLE);
+err_free_gpio_ale:
+ gpio_free(RB4XX_NAND_GPIO_ALE);
+err_free_gpio_ready:
+ gpio_free(RB4XX_NAND_GPIO_READY);
+err:
+ return ret;
+}
+
+static int rb4xx_nand_remove(struct platform_device *pdev)
+{
+ struct rb4xx_nand_info *info = platform_get_drvdata(pdev);
+
+ nand_release(&info->mtd);
+ platform_set_drvdata(pdev, NULL);
+ kfree(info);
+ gpio_free(RB4XX_NAND_GPIO_NCE);
+ gpio_free(RB4XX_NAND_GPIO_CLE);
+ gpio_free(RB4XX_NAND_GPIO_ALE);
+ gpio_free(RB4XX_NAND_GPIO_READY);
+
+ return 0;
+}
+
+static struct platform_driver rb4xx_nand_driver = {
+ .probe = rb4xx_nand_probe,
+ .remove = rb4xx_nand_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init rb4xx_nand_init(void)
+{
+ return platform_driver_register(&rb4xx_nand_driver);
+}
+
+static void __exit rb4xx_nand_exit(void)
+{
+ platform_driver_unregister(&rb4xx_nand_driver);
+}
+
+module_init(rb4xx_nand_init);
+module_exit(rb4xx_nand_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
+MODULE_LICENSE("GPL v2");
--
1.8.5.3