menu "QoS and/or fair queueing"
config ADK_KERNEL_NET_SCH_CSZ
boolean
default n
config ADK_KERNEL_NET_SCH_NETEM
boolean
default n
config ADK_KERNEL_NET_QOS
boolean
default n
config ADK_KERNEL_NET_ESTIMATOR
boolean
default n
config ADK_KERNEL_NET_SCHED
#prompt "kmod-net-sched.................... QoS and/or fair queueing support"
boolean
default n
help
When the kernel has several packets to send out over a network
device, it has to decide which ones to send first, which ones to
delay, and which ones to drop. This is the job of the queueing
disciplines, several different algorithms for how to do this
"fairly" have been proposed.
If you say N here, you will get the standard packet scheduler, which
is a FIFO (first come, first served). If you say Y here, you will be
able to choose from among several alternative algorithms which can
then be attached to different network devices. This is useful for
example if some of your network devices are real time devices that
need a certain minimum data flow rate, or if you need to limit the
maximum data flow rate for traffic which matches specified criteria.
This code is considered to be experimental.
To administer these schedulers, you'll need the user-level utilities
from the package iproute2+tc at .
That package also contains some documentation; for more, check out
.
This Quality of Service (QoS) support will enable you to use
Differentiated Services (diffserv) and Resource Reservation Protocol
(RSVP) on your Linux router if you also say Y to the corresponding
classifiers below. Documentation and software is at
.
comment "Queueing/Scheduling"
config ADK_KPACKAGE_KMOD_NET_SCH_CBQ
prompt "kmod-sched-cbq.................... Class Based Queueing (CBQ)"
tristate
select ADK_KERNEL_NET_SCHED
default n
help
Say Y here if you want to use the Class-Based Queueing (CBQ) packet
scheduling algorithm. This algorithm classifies the waiting packets
into a tree-like hierarchy of classes; the leaves of this tree are
in turn scheduled by separate algorithms.
See the top of for more details.
CBQ is a commonly used scheduler, so if you're unsure, you should
say Y here. Then say Y to all the queueing algorithms below that you
want to use as leaf disciplines.
config ADK_KPACKAGE_KMOD_NET_SCH_HTB
prompt "kmod-sched-htb.................... Hierarchical Token Bucket (HTB)"
tristate
select ADK_KERNEL_NET_SCHED
default n
help
Say Y here if you want to use the Hierarchical Token Buckets (HTB)
packet scheduling algorithm. See
for complete manual and
in-depth articles.
HTB is very similar to CBQ regarding its goals however is has
different properties and different algorithm.
config ADK_KPACKAGE_KMOD_NET_SCH_HFSC
prompt "kmod-sched-hfsc................... Hierarchical Fair Service Curve (HFSC)"
tristate
select ADK_KERNEL_NET_SCHED
default n
help
Say Y here if you want to use the Hierarchical Fair Service Curve
(HFSC) packet scheduling algorithm.
config ADK_KPACKAGE_KMOD_NET_SCH_ATM
prompt "kmod-sched-atm.................... ATM Virtual Circuits (ATM)"
tristate
depends on ADK_KPACKAGE_KMOD_ATM
select ADK_KERNEL_NET_SCHED
default n
help
Say Y here if you want to use the ATM pseudo-scheduler. This
provides a framework for invoking classifiers, which in turn
select classes of this queuing discipline. Each class maps
the flow(s) it is handling to a given virtual circuit.
See the top of ) for more details.
config ADK_KPACKAGE_KMOD_NET_SCH_PRIO
prompt "kmod-sched-prio................... Multi Band Priority Queueing (PRIO)"
tristate
select ADK_KERNEL_NET_SCHED
default n
help
Say Y here if you want to use an n-band priority queue packet
scheduler.
config ADK_KPACKAGE_KMOD_NET_SCH_RED
prompt "kmod-sched-red.................... Random Early Detection (RED)"
tristate
select ADK_KERNEL_NET_SCHED
default n
help
Say Y here if you want to use the Random Early Detection (RED)
packet scheduling algorithm.
See the top of for more details.
config ADK_KPACKAGE_KMOD_NET_SCH_SFQ
prompt "kmod-sched-sfq.................... Stochastic Fairness Queueing (SFQ)"
tristate
select ADK_KERNEL_NET_SCHED
default n
help
Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
packet scheduling algorithm .
See the top of for more details.
#config ADK_KPACKAGE_KMOD_NET_SCH_TEQL
# prompt "kmod-sched-teql................... True Link Equalizer (TEQL)"
# tristate
# select ADK_KERNEL_NET_SCHED
# default n
# help
# Say Y here if you want to use the True Link Equalizer (TLE) packet
# scheduling algorithm. This queueing discipline allows the combination
# of several physical devices into one virtual device.
#
# See the top of for more details.
config ADK_KPACKAGE_KMOD_NET_SCH_TBF
prompt "kmod-sched-tbf.................... Token Bucket Filter (TBF)"
tristate
select ADK_KERNEL_NET_SCHED
default n
help
Say Y here if you want to use the Token Bucket Filter (TBF) packet
scheduling algorithm.
See the top of for more details.
config ADK_KPACKAGE_KMOD_NET_SCH_GRED
prompt "kmod-sched-gred................... Generic Random Early Detection (GRED)"
tristate
select ADK_KERNEL_NET_SCHED
default n
help
Say Y here if you want to use the Generic Random Early Detection
(GRED) packet scheduling algorithm for some of your network devices
(see the top of for details and
references about the algorithm).
config ADK_KPACKAGE_KMOD_NET_SCH_DSMARK
prompt "kmod-sched-dsmark................. Differentiated Services marker (DSMARK)"
tristate
select ADK_KERNEL_NET_SCHED
default n
help
Say Y if you want to schedule packets according to the
Differentiated Services architecture proposed in RFC 2475.
Technical information on this method, with pointers to associated
RFCs, is available at .
config ADK_KPACKAGE_KMOD_NET_SCH_INGRESS
prompt "kmod-sched-ingress................ Ingress Qdisc"
tristate
select ADK_KERNEL_NET_SCHED
select ADK_KERNEL_NETFILTER
select ADK_KERNEL_NET_CLS_ACT
default n
help
Say Y here if you want to use classifiers for incoming packets.
If unsure, say Y.
comment "Classification"
config ADK_KERNEL_NET_CLS
boolean
select ADK_KERNEL_NET_SCHED
default n
config ADK_KPACKAGE_KMOD_NET_CLS_BASIC
prompt "kmod-cls-basic.................... Elementary classification (BASIC)"
tristate
select ADK_KERNEL_NET_CLS
default n
help
Say Y here if you want to be able to classify packets using
only extended matches and actions.
config ADK_KPACKAGE_KMOD_NET_CLS_TCINDEX
prompt "kmod-cls-tcindex.................. Traffic-Control Index (TCINDEX)"
tristate
select ADK_KERNEL_NET_CLS
default n
help
Say Y here if you want to be able to classify packets based on
traffic control indices. You will want this feature if you want
to implement Differentiated Services together with DSMARK.
config ADK_KPACKAGE_KMOD_NET_CLS_ROUTE4
prompt "kmod-cls-route4................... Routing decision (ROUTE)"
tristate
select ADK_KERNEL_NET_CLS
default n
help
If you say Y here, you will be able to classify packets
according to the route table entry they matched.
config ADK_KPACKAGE_KMOD_NET_CLS_FW
prompt "kmod-cls-fw....................... Netfilter mark (FW)"
tristate
select ADK_KERNEL_NET_CLS
default n
help
If you say Y here, you will be able to classify packets
according to netfilter/firewall marks.
config ADK_KPACKAGE_KMOD_NET_CLS_U32
prompt "kmod-cls-u32...................... Universal 32bit comparisons w/ hashing (U32)"
tristate
select ADK_KERNEL_NET_CLS
default n
help
Say Y here to be able to classify packets using a universal
32bit pieces based comparison scheme.
config ADK_KPACKAGE_KMOD_NET_CLS_U32_PERF
prompt ".................................. Performance counters support"
bool
select ADK_KERNEL_NET_CLS
depends on ADK_KPACKAGE_KMOD_NET_CLS_U32
default n
help
Say Y here to make u32 gather additional statistics useful for
fine tuning u32 classifiers.
config ADK_KPACKAGE_KMOD_NET_CLS_U32_MARK
prompt ".................................. Netfilter marks support"
bool
select ADK_KERNEL_NET_CLS
depends on ADK_KPACKAGE_KMOD_NET_CLS_U32
depends on ADK_KPACKAGE_KMOD_NET_CLS_FW
default n
help
Say Y here to be able to use netfilter marks as u32 key.
comment "Actions"
config ADK_KERNEL_NET_CLS_ACT
boolean
select ADK_KERNEL_NET_SCHED
select ADK_KERNEL_NET_ESTIMATOR
default n
config ADK_KPACKAGE_KMOD_NET_ACT_POLICE
prompt "kmod-act-police................... Traffic Policing"
tristate
select ADK_KERNEL_NET_CLS_ACT
default n
help
Say Y here if you want to do traffic policing, i.e. strict
bandwidth limiting. This action replaces the existing policing
module.
config ADK_KPACKAGE_KMOD_NET_ACT_GACT
prompt "kmod-act-gact..................... Generic actions"
tristate
select ADK_KERNEL_NET_CLS_ACT
default n
help
Say Y here to take generic actions such as dropping and
accepting packets.
config ADK_KPACKAGE_KMOD_NET_ACT_MIRRED
prompt "kmod-act-mirred................... Redirecting and Mirroring"
tristate
select ADK_KERNEL_NET_CLS_ACT
default n
help
Say Y here to allow packets to be mirrored or redirected to
other devices.
config ADK_KPACKAGE_KMOD_NET_ACT_IPT
prompt "kmod-act-ipt...................... IPtables targets"
tristate
select ADK_KERNEL_NET_CLS_ACT
select ADK_KPACKAGE_KMOD_IP_NF_IPTABLES
default n
help
Say Y here to be able to invoke iptables targets after successful
classification.
config ADK_KPACKAGE_KMOD_NET_ACT_PEDIT
prompt "kmod-act-pedit.................... Packet Editing"
tristate
select ADK_KERNEL_NET_CLS_ACT
default n
help
Say Y here if you want to mangle the content of packets.
endmenu