menu "Netfilter (Firewall/Filtering)" config ADK_KERNEL_NETFILTER bool default n config ADK_KERNEL_NETFILTER_ADVANCED bool default n config ADK_KERNEL_NETFILTER_XTABLES bool select ADK_KERNEL_NETFILTER select ADK_KERNEL_NETFILTER_ADVANCED default n config ADK_KERNEL_NETFILTER_DEBUG bool default n config ADK_KERNEL_IP_NF_MATCH_LAYER7_DEBUG bool default n config ADK_KERNEL_IP_NF_TARGET_MIRROR tristate default n config ADK_KERNEL_IP_NF_NAT_SNMP_BASIC tristate default n config ADK_KERNEL_IP_NF_TARGET_DSCP tristate default n config ADK_KERNEL_IP_NF_TARGET_MARK tristate default n config ADK_KERNEL_IP_NF_TARGET_CLASSIFY tristate default n config ADK_KERNEL_IP_NF_TARGET_IMQ tristate default n config ADK_KERNEL_IP_NF_TARGET_CONNMARK tristate default n config ADK_KERNEL_IP_NF_ARPTABLES tristate default n config ADK_KERNEL_IP_NF_COMPAT_IPCHAINS tristate default n config ADK_KERNEL_IP_NF_COMPAT_IPFWADM tristate default n config ADK_KERNEL_IP6_NF_QUEUE tristate default n config ADK_KERNEL_IP6_NF_IPTABLES tristate default n config ADK_KERNEL_IP_ROUTE_FWMARK bool default n config ADK_KERNEL_IP_NF_QUEUE tristate default n config ADK_KERNEL_IP_NF_MATCH_TIME tristate default n config ADK_KERNEL_IP_NF_MATCH_CONDITION tristate default n config ADK_KERNEL_IP_NF_MATCH_DSCP tristate default n config ADK_KERNEL_IP_NF_MATCH_AH_ESP tristate default n config ADK_KERNEL_IP_NF_MATCH_LENGTH tristate default n config ADK_KERNEL_IP_NF_MATCH_HELPER tristate default n # cannot be ADK_KERNEL_IP_NF_MATCH_STATE because # netfilter is built as a module -> this'll always be # a module, too config ADK_KPACKAGE_KMOD_IP_NF_MATCH_STATE tristate select ADK_KPACKAGE_KMOD_NETFILTER_XT_MATCH_STATE default n config ADK_KPACKAGE_KMOD_NETFILTER_XT_MATCH_STATE tristate default n # cannot be ADK_KERNEL_IP_NF_MATCH_CONNTRACK because # netfilter is built as a module -> this'll always be # a module, too config ADK_KPACKAGE_KMOD_IP_NF_MATCH_CONNTRACK tristate default n config ADK_KERNEL_IP_NF_MATCH_CONNMARK tristate default n config ADK_KERNEL_IP_NF_MATCH_UNCLEAN tristate default n config ADK_KERNEL_IP_NF_MATCH_STRING tristate default n menu "Core Netfilter Configuration" config ADK_KPACKAGE_KMOD_NF_CONNTRACK tristate 'Netfilter connection tracking support' select ADK_KERNEL_NETFILTER_XTABLES help Connection tracking keeps a record of what packets have passed through your machine, in order to figure out how they are related into connections. Layer 3 independent connection tracking is experimental scheme which generalize ip_conntrack to support other layer 3 protocols. config ADK_KPACKAGE_KMOD_NETFILTER_XT_TARGET_CLASSIFY tristate '"CLASSIFY" target support' select ADK_KERNEL_NETFILTER_XTABLES help This option adds a `CLASSIFY' target, which enables the user to set the priority of a packet. Some qdiscs can use this value for classification, among these are: atm, cbq, dsmark, pfifo_fast, htb, prio config ADK_KPACKAGE_KMOD_NETFILTER_XT_TARGET_CONNMARK tristate '"CONNMARK" target support' select ADK_KERNEL_NETFILTER_XTABLES select ADK_KPACKAGE_KMOD_NF_CONNTRACK help This option adds a `CONNMARK' target, which allows one to manipulate the connection mark value. Similar to the MARK target, but affects the connection mark value rather than the packet mark value. config ADK_KPACKAGE_KMOD_NETFILTER_XT_TARGET_MARK tristate '"MARK" target support' select ADK_KERNEL_NETFILTER_XTABLES help This option adds a `MARK' target, which allows you to create rules in the `mangle' table which alter the netfilter mark (nfmark) field associated with the packet prior to routing. This can change the routing method (see `Use netfilter MARK value as routing key') and can also be used by other subsystems to change their behavior. config ADK_KPACKAGE_KMOD_NETFILTER_XT_TARGET_NFQUEUE tristate '"NFQUEUE" target support' select ADK_KERNEL_NETFILTER_XTABLES help This target replaced the old obsolete QUEUE target. As opposed to QUEUE, it supports 65535 different queues, not just one. endmenu menu "IP: Netfilter Configuration" config ADK_KPACKAGE_KMOD_NF_CONNTRACK_IPV4 bool 'IPv4 connection tracking support (required for NAT)' select ADK_KPACKAGE_KMOD_NF_CONNTRACK help Connection tracking keeps a record of what packets have passed through your machine, in order to figure out how they are related into connections. config ADK_KPACKAGE_KMOD_IP_NF_CT_ACCT bool 'Connection tracking flow accounting' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK help If this option is enabled, the connection tracking code will keep per-flow packet and byte counters. Those counters can be used for flow-based accounting or the `connbytes' match. config ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK_MARK bool 'Connection mark tracking support' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK select ADK_KERNEL_IP_NF_MATCH_CONNMARK help This option enables support for connection marks, used by the `CONNMARK' target and `connmark' match. Similar to the mark value of packets, but this mark value is kept in the conntrack session instead of the individual packets. config ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK_SECMARK bool 'Connection tracking security mark support' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK #FIXME select NETWORK_SECMARK help This option enables security markings to be applied to connections. Typically they are copied to connections from packets using the CONNSECMARK target and copied back from connections to packets with the same target, with the packets being originally labeled via SECMARK. config ADK_KPACKAGE_KMOD_IP_NF_FTP tristate 'FTP protocol support' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK help Tracking FTP connections is problematic: special helpers are required for tracking them, and doing masquerading and other forms of Network Address Translation on them. config ADK_KPACKAGE_KMOD_IP_NF_IRC tristate 'IRC protocol support' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK help There is a commonly-used extension to IRC called Direct Client-to-Client Protocol (DCC). This enables users to send files to each other, and also chat to each other without the need of a server. DCC Sending is used anywhere you send files over IRC, and DCC Chat is most commonly used by Eggdrop bots. If you are using NAT, this extension will enable you to send files and initiate chats. Note that you do NOT need this extension to get files or have others initiate chats, or everything else in IRC. config ADK_KPACKAGE_KMOD_IP_NF_NETBIOS_NS tristate 'NetBIOS name service protocol support (EXPERIMENTAL)' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK help NetBIOS name service requests are sent as broadcast messages from an unprivileged port and responded to with unicast messages to the same port. This make them hard to firewall properly because connection tracking doesn't deal with broadcasts. This helper tracks locally originating NetBIOS name service requests and the corresponding responses. It relies on correct IP address configuration, specifically netmask and broadcast address. When properly configured, the output of "ip address show" should look similar to this: $ ip -4 address show eth0 4: eth0: mtu 1500 qdisc pfifo_fast qlen 1000 inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0 config ADK_KPACKAGE_KMOD_IP_NF_TFTP tristate 'TFTP protocol support' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK help TFTP connection tracking helper, this is required depending on how restrictive your ruleset is. If you are using a tftp client behind -j SNAT or -j MASQUERADING you will need this. config ADK_KPACKAGE_KMOD_IP_NF_AMANDA tristate 'Amanda backup protocol support' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK #FIXME TEXTSEARCH && TEXTSEARCH_KMP help If you are running the Amanda backup package on this machine or machines that will be MASQUERADED through this machine, then you may want to enable this feature. This allows the connection tracking and natting code to allow the sub-channels that Amanda requires for communication of the backup data, messages and index. config ADK_KPACKAGE_KMOD_IP_NF_PPTP tristate 'PPTP protocol support' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK help This module adds support for PPTP (Point to Point Tunnelling Protocol, RFC2637) connection tracking and NAT. If you are running PPTP sessions over a stateful firewall or NAT box, you may want to enable this feature. Please note that not all PPTP modes of operation are supported yet. For more info, read top of the file net/ipv4/netfilter/ip_conntrack_pptp.c config ADK_KPACKAGE_KMOD_IP_NF_H323 tristate 'H.323 protocol support (EXPERIMENTAL)' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK help H.323 is a VoIP signalling protocol from ITU-T. As one of the most important VoIP protocols, it is widely used by voice hardware and software including voice gateways, IP phones, Netmeeting, OpenPhone, Gnomemeeting, etc. With this module you can support H.323 on a connection tracking/NAT firewall. This module supports RAS, Fast Start, H.245 Tunnelling, Call Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat, whiteboard, file transfer, etc. For more information, please visit http://nath323.sourceforge.net/. config ADK_KPACKAGE_KMOD_IP_NF_SIP tristate 'SIP protocol support (EXPERIMENTAL)' depends on ADK_KPACKAGE_KMOD_IP_NF_CONNTRACK help SIP is an application-layer control protocol that can establish, modify, and terminate multimedia sessions (conferences) such as Internet telephony calls. With the ip_conntrack_sip and the ip_nat_sip modules you can support the protocol on a connection tracking/NATing firewall. config ADK_KPACKAGE_KMOD_IP_NF_IPTABLES tristate 'IP tables support (required for filtering/masq/NAT)' select ADK_KERNEL_NETFILTER_XTABLES help iptables is a general, extensible packet identification framework. The packet filtering and full NAT (masquerading, port forwarding, etc) subsystems now use this: say `Y' or `M' here if you want to use either of those. config ADK_KPACKAGE_KMOD_IP_NF_FILTER tristate 'Packet Filtering' depends on ADK_KPACKAGE_KMOD_IP_NF_IPTABLES help Packet filtering defines a table `filter', which has a series of rules for simple packet filtering at local input, forwarding and local output. See the man page for iptables(8). config ADK_KPACKAGE_KMOD_NF_NAT tristate 'Full NAT' depends on ADK_KPACKAGE_KMOD_IP_NF_IPTABLES help The Full NAT option allows masquerading, port forwarding and other forms of full Network Address Port Translation. It is controlled by the `nat' table in iptables: see the man page for iptables(8). config ADK_KPACKAGE_KMOD_IP_NF_TARGET_MASQUERADE tristate 'MASQUERADE target support' depends on ADK_KPACKAGE_KMOD_NF_NAT help Masquerading is a special case of NAT: all outgoing connections are changed to seem to come from a particular interface's address, and if the interface goes down, those connections are lost. This is only useful for dialup accounts with dynamic IP address (ie. your IP address will be different on next dialup). config ADK_KPACKAGE_KMOD_IP_NF_TARGET_REJECT tristate 'REJECT target support' depends on ADK_KPACKAGE_KMOD_IP_NF_FILTER help The REJECT target allows a filtering rule to specify that an ICMP error should be issued in response to an incoming packet, rather than silently being dropped. config ADK_KPACKAGE_KMOD_IP_NF_TARGET_LOG tristate 'LOG target support' depends on ADK_KPACKAGE_KMOD_IP_NF_FILTER help This option adds a `LOG' target, which allows you to create rules in any iptables table which records the packet header to the syslog. config ADK_KPACKAGE_KMOD_IP_NF_TARGET_ULOG tristate 'ULOG target support (ipv4 only)' depends on ADK_KPACKAGE_KMOD_IP_NF_FILTER help This option enables the old IPv4-only "ipt_ULOG" implementation which has been obsoleted by the new "nfnetlink_log" code (see CONFIG_NETFILTER_NETLINK_LOG). This option adds a `ULOG' target, which allows you to create rules in any iptables table. The packet is passed to a userspace logging daemon using netlink multicast sockets; unlike the LOG target which can only be viewed through syslog. The appropriate userspace logging daemon (ulogd) may be obtained from config ADK_KPACKAGE_KMOD_IP_NF_TARGET_REDIRECT tristate 'REDIRECT target support' depends on ADK_KPACKAGE_KMOD_IP_NF_NAT help REDIRECT is a special case of NAT: all incoming connections are mapped onto the incoming interface's address, causing the packets to come to the local machine instead of passing through. This is useful for transparent proxies. config ADK_KPACKAGE_KMOD_IP_NF_TARGET_NETMAP tristate 'NETMAP target support' depends on ADK_KPACKAGE_KMOD_IP_NF_NAT help NETMAP is an implementation of static 1:1 NAT mapping of network addresses. It maps the network address part, while keeping the host address part intact. It is similar to Fast NAT, except that Netfilter's connection tracking doesn't work well with Fast NAT. config ADK_KPACKAGE_KMOD_IP_NF_TARGET_SAME tristate 'SAME target support' depends on ADK_KPACKAGE_KMOD_IP_NF_NAT help This option adds a `SAME' target, which works like the standard SNAT target, but attempts to give clients the same IP for all connections. config ADK_KPACKAGE_KMOD_IP_NF_MANGLE tristate 'Packet mangling' depends on ADK_KPACKAGE_KMOD_IP_NF_IPTABLES help This option adds a `mangle' table to iptables: see the man page for iptables(8). This table is used for various packet alterations which can effect how the packet is routed. config ADK_KPACKAGE_KMOD_IP_NF_TARGET_ECN tristate 'ECN target support' depends on ADK_KPACKAGE_KMOD_IP_NF_MANGLE help This option adds a `ECN' target, which can be used in the iptables mangle table. You can use this target to remove the ECN bits from the IPv4 header of an IP packet. This is particularly useful, if you need to work around existing ECN blackholes on the internet, but don't want to disable ECN support in general. endmenu endmenu