diff -Nur linux-2.6.30.orig/arch/mips/configs/fulong_defconfig linux-2.6.30/arch/mips/configs/fulong_defconfig
--- linux-2.6.30.orig/arch/mips/configs/fulong_defconfig	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/configs/fulong_defconfig	1970-01-01 01:00:00.000000000 +0100
@@ -1,1912 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Fri Nov 28 17:53:48 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-CONFIG_LEMOTE_FULONG=y
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_I8259=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-
-#
-# CPU selection
-#
-CONFIG_CPU_LOONGSON2=y
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_LOONGSON2=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-# CONFIG_PAGE_SIZE_4KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PAGE_SIZE_16KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_WB=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="lm32"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-CONFIG_ISA=y
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_PHONET=m
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-CONFIG_NET_9P=m
-# CONFIG_NET_9P_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x1fc00000
-CONFIG_MTD_PHYSMAP_LEN=0x80000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
-CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-CONFIG_MACVLAN=m
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-CONFIG_VETH=m
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NET_FC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-CONFIG_I2C_VIAPRO=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_VIDEO_SH_MOBILE_CEU=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_ZC3XX=m
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-CONFIG_USB_ET61X251=m
-# CONFIG_VIDEO_OVCAMCHIP is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_USB_DSBR is not set
-CONFIG_USB_SI470X=m
-CONFIG_USB_MR800=m
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-CONFIG_FB_RADEON=y
-# CONFIG_FB_RADEON_I2C is not set
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_VIA82XX=m
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_MIPS=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-# CONFIG_THRUSTMASTER_FF is not set
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
-# CONFIG_USB_STORAGE_KARMA is not set
-CONFIG_USB_STORAGE_CYPRESS_ATACB=y
-CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_SEVSEG=m
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_VST=m
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=m
-CONFIG_EXT4DEV_COMPAT=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-CONFIG_JBD2=m
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=936
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_OMFS_FS=m
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp936"
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_CIFS_DEBUG2=y
-CONFIG_CIFS_EXPERIMENTAL=y
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-CONFIG_NLS_CODEPAGE_936=y
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=2048
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -Nur linux-2.6.30.orig/arch/mips/configs/fuloong2e_defconfig linux-2.6.30/arch/mips/configs/fuloong2e_defconfig
--- linux-2.6.30.orig/arch/mips/configs/fuloong2e_defconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/configs/fuloong2e_defconfig	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,2018 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc8
+# Thu Jun 11 01:50:35 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_MACH_LOONGSON=y
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_LEMOTE_FULOONG2E=y
+# CONFIG_LEMOTE_FULOONG2F is not set
+# CONFIG_LEMOTE_YEELOONG2F is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_LOONGSON2E=y
+# CONFIG_CPU_LOONGSON2F is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_LOONGSON2=y
+CONFIG_SYS_HAS_CPU_LOONGSON2E=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+# CONFIG_PAGE_SIZE_4KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PAGE_SIZE_16KB=y
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-loongson2e"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_BINFMT_ELF32=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_PHONET=m
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_BLK_DEV_TC86C001 is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_TC35815 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NET_FC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+CONFIG_SOC_CAMERA_MT9V022=m
+# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_PLATFORM=m
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+# CONFIG_USB_STV06XX is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+# CONFIG_USB_GSPCA_MR97310A is not set
+CONFIG_USB_GSPCA_OV519=m
+# CONFIG_USB_GSPCA_OV534 is not set
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+# CONFIG_VIDEO_OVCAMCHIP is not set
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_USB_DSBR is not set
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
+# CONFIG_RADIO_TEA5764 is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+# CONFIG_FB_RADEON_I2C is not set
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SM7XX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_VIA82XX=m
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
+# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_VST=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_AEC is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=936
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp936"
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_DEBUG2=y
+CONFIG_CIFS_EXPERIMENTAL=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=y
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff -Nur linux-2.6.30.orig/arch/mips/configs/fuloong2f_defconfig linux-2.6.30/arch/mips/configs/fuloong2f_defconfig
--- linux-2.6.30.orig/arch/mips/configs/fuloong2f_defconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/configs/fuloong2f_defconfig	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,2637 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun 10 22:20:53 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_MACH_LOONGSON=y
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_LEMOTE_FULOONG2E is not set
+CONFIG_LEMOTE_FULOONG2F=y
+# CONFIG_LEMOTE_YEELOONG2F is not set
+CONFIG_CS5536=y
+CONFIG_CS5536_MFGPT=y
+CONFIG_UCA_SIZE=0x2000000
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2E is not set
+CONFIG_CPU_LOONGSON2F=y
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_LOONGSON2=y
+CONFIG_SYS_HAS_CPU_LOONGSON2F=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+# CONFIG_PAGE_SIZE_4KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PAGE_SIZE_16KB=y
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_FREEZER=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+CONFIG_TCIC=m
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=m
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_CPCI=y
+CONFIG_HOTPLUG_PCI_SHPC=m
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_BINFMT_ELF32=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="/dev/hda3"
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_LOONGSON2F_CPU_FREQ=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+CONFIG_DEFAULT_BIC=y
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="bic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
+
+#
+# DECnet: Netfilter Configuration
+#
+CONFIG_DECNET_NF_GRABULATOR=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+CONFIG_TIPC_ADVANCED=y
+CONFIG_TIPC_ZONES=3
+CONFIG_TIPC_CLUSTERS=1
+CONFIG_TIPC_NODES=255
+CONFIG_TIPC_SLAVE_NODES=0
+CONFIG_TIPC_PORTS=8191
+CONFIG_TIPC_LOG=0
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=y
+CONFIG_ATM_CLIP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+CONFIG_ECONET=m
+CONFIG_ECONET_AUNUDP=y
+CONFIG_ECONET_NATIVE=y
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_MULTIQ is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+# CONFIG_NET_ACT_NAT is not set
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_YAM=m
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_AF_RXRPC=y
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPACPI is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION_CTL=m
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NET_SB1000=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+CONFIG_REALTEK_PHY=m
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+CONFIG_R8169_VLAN=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_NEWTON=m
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+CONFIG_MOUSE_INPORT=m
+# CONFIG_MOUSE_ATIXL is not set
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+# CONFIG_JOYSTICK_ZHENHUA is not set
+CONFIG_JOYSTICK_JOYDUMP=m
+# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_ELO=m
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+CONFIG_TOUCHSCREEN_MTOUCH=m
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+CONFIG_TOUCHSCREEN_MK712=m
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_PNP is not set
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=16
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=y
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+# CONFIG_I2C_ISCH is not set
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_OCORES=m
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+CONFIG_I2C_VOODOO3=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_MAX6875=m
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# ISA-based Watchdog Cards
+#
+CONFIG_PCWATCHDOG=m
+CONFIG_MIXCOMWD=m
+CONFIG_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+CONFIG_WDT_501_PCI=y
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_MIPS is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_IR_I2C=m
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA6588=m
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_VIDEO_STRADIS=m
+CONFIG_VIDEO_ZORAN=m
+CONFIG_VIDEO_ZORAN_DC30=m
+CONFIG_VIDEO_ZORAN_ZR36060=m
+CONFIG_VIDEO_ZORAN_BUZ=m
+CONFIG_VIDEO_ZORAN_DC10=m
+CONFIG_VIDEO_ZORAN_LML33=m
+CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_MPEG=m
+CONFIG_VIDEO_CX88_VP3054=m
+# CONFIG_VIDEO_CX23885 is not set
+# CONFIG_VIDEO_AU0828 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CX18 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_HDPVR is not set
+CONFIG_VIDEO_EM28XX=m
+# CONFIG_VIDEO_EM28XX_ALSA is not set
+# CONFIG_VIDEO_EM28XX_DVB is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+# CONFIG_USB_W9968CF is not set
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_TYPHOON_PROC_FS=y
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
+CONFIG_DVB_USB_DIBUSB_MC=m
+# CONFIG_DVB_USB_DIB0700 is not set
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+# CONFIG_DVB_USB_M920X is not set
+# CONFIG_DVB_USB_GL861 is not set
+# CONFIG_DVB_USB_AU6610 is not set
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+# CONFIG_DVB_USB_TTUSB2 is not set
+CONFIG_DVB_USB_DTT200U=m
+# CONFIG_DVB_USB_OPERA1 is not set
+# CONFIG_DVB_USB_AF9005 is not set
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_USB_CE6230 is not set
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported SDMC DM1105 Adapters
+#
+# CONFIG_DVB_DM1105 is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_ZL10036=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0288=m
+CONFIG_DVB_STB6000=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TUNER_CX24113=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_CX24116=m
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_STV0297=m
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DVB_LGS8GL5=m
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_VGASTATE=m
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=m
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+CONFIG_FB_PM2=m
+CONFIG_FB_PM2_FIFO_DISCONNECT=y
+CONFIG_FB_CYBER2000=m
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_S1D13XXX=m
+CONFIG_FB_NVIDIA=m
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_MATROX_MULTIHEAD=y
+CONFIG_FB_RADEON=m
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=m
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+# CONFIG_FB_S3 is not set
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+# CONFIG_FB_SAVAGE_ACCEL is not set
+CONFIG_FB_SIS=y
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+# CONFIG_FB_VIA is not set
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
+CONFIG_FB_VOODOO1=m
+# CONFIG_FB_VT8623 is not set
+CONFIG_FB_TRIDENT=m
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SM7XX is not set
+CONFIG_FB_VIRTUAL=m
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+CONFIG_SND_CS5535AUDIO=m
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+# CONFIG_ACORN_PARTITION_CUMANA is not set
+# CONFIG_ACORN_PARTITION_EESOX is not set
+CONFIG_ACORN_PARTITION_ICS=y
+# CONFIG_ACORN_PARTITION_ADFS is not set
+# CONFIG_ACORN_PARTITION_POWERTEC is not set
+CONFIG_ACORN_PARTITION_RISCIX=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+CONFIG_SGI_PARTITION=y
+CONFIG_ULTRIX_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff -Nur linux-2.6.30.orig/arch/mips/configs/yeeloong2f_defconfig linux-2.6.30/arch/mips/configs/yeeloong2f_defconfig
--- linux-2.6.30.orig/arch/mips/configs/yeeloong2f_defconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/configs/yeeloong2f_defconfig	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,2711 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun 10 22:18:32 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_MACH_LOONGSON=y
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_LEMOTE_FULOONG2E is not set
+# CONFIG_LEMOTE_FULOONG2F is not set
+CONFIG_LEMOTE_YEELOONG2F=y
+CONFIG_CS5536=y
+CONFIG_SYS_HAS_MACH_PROM_INIT_CMDLINE=y
+CONFIG_CS5536_MFGPT=y
+CONFIG_UCA_SIZE=0x400000
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2E is not set
+CONFIG_CPU_LOONGSON2F=y
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_LOONGSON2=y
+CONFIG_SYS_HAS_CPU_LOONGSON2F=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+# CONFIG_PAGE_SIZE_4KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PAGE_SIZE_16KB=y
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_FREEZER=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI_FAKE=m
+CONFIG_HOTPLUG_PCI_CPCI=y
+CONFIG_HOTPLUG_PCI_SHPC=m
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_BINFMT_ELF32=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_LOONGSON2F_CPU_FREQ=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+CONFIG_DEFAULT_BIC=y
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="bic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
+
+#
+# DECnet: Netfilter Configuration
+#
+CONFIG_DECNET_NF_GRABULATOR=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+CONFIG_TIPC_ADVANCED=y
+CONFIG_TIPC_ZONES=3
+CONFIG_TIPC_CLUSTERS=1
+CONFIG_TIPC_NODES=255
+CONFIG_TIPC_SLAVE_NODES=0
+CONFIG_TIPC_PORTS=8191
+CONFIG_TIPC_LOG=0
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=y
+CONFIG_ATM_CLIP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+CONFIG_ECONET=m
+CONFIG_ECONET_AUNUDP=y
+CONFIG_ECONET_NATIVE=y
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_MULTIQ is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+# CONFIG_NET_ACT_NAT is not set
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_YAM=m
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+CONFIG_DONGLE=y
+CONFIG_ESI_DONGLE=m
+CONFIG_ACTISYS_DONGLE=m
+CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
+CONFIG_LITELINK_DONGLE=m
+CONFIG_MA600_DONGLE=m
+CONFIG_GIRBIL_DONGLE=m
+CONFIG_MCP2120_DONGLE=m
+CONFIG_OLD_BELKIN_DONGLE=m
+CONFIG_ACT200L_DONGLE=m
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_COMPAT=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PCI=m
+# CONFIG_MTD_INTEL_VR_NOR is not set
+CONFIG_MTD_PLATRAM=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+# CONFIG_MTD_PMC551_BUGFIX is not set
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+# CONFIG_MTD_DATAFLASH_OTP is not set
+CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_DOC2000=m
+CONFIG_MTD_DOC2001=m
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPACPI is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+CONFIG_EEPROM_93CX6=y
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+CONFIG_VETH=m
+# CONFIG_NET_SB1000 is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+CONFIG_REALTEK_PHY=m
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_TC35815 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=m
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+CONFIG_RTL8187=y
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+# CONFIG_USB_NET_MCS7830 is not set
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_NEWTON=m
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+CONFIG_MOUSE_INPORT=m
+# CONFIG_MOUSE_ATIXL is not set
+CONFIG_MOUSE_LOGIBM=m
+CONFIG_MOUSE_PC110PAD=m
+CONFIG_MOUSE_VSXXXAA=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+CONFIG_STALDRV=y
+# CONFIG_STALLION is not set
+# CONFIG_ISTALLION is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_PNP is not set
+CONFIG_SERIAL_8250_NR_UARTS=16
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=y
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+CONFIG_SERIAL_8250_HUB6=m
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+# CONFIG_I2C_ISCH is not set
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_OCORES=m
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+CONFIG_I2C_VOODOO3=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_MAX6875=m
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_TYPHOON_PROC_FS=y
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SM7XX=y
+CONFIG_FB_SM7XX_ACCEL=y
+# CONFIG_FB_SM7XX_DUALHEAD is not set
+CONFIG_FB_VIRTUAL=m
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+# CONFIG_SND_VIRMIDI is not set
+CONFIG_SND_MTPAV=m
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+CONFIG_SND_CS5535AUDIO=y
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+CONFIG_USB_RIO500=m
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_FTDI_ELAN is not set
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+# CONFIG_MMC_BLOCK is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=m
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+# CONFIG_NCPFS_SMALLDOS is not set
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+CONFIG_AFS_FS=m
+# CONFIG_AFS_DEBUG is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+# CONFIG_ACORN_PARTITION_CUMANA is not set
+# CONFIG_ACORN_PARTITION_EESOX is not set
+CONFIG_ACORN_PARTITION_ICS=y
+# CONFIG_ACORN_PARTITION_ADFS is not set
+# CONFIG_ACORN_PARTITION_POWERTEC is not set
+CONFIG_ACORN_PARTITION_RISCIX=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+CONFIG_SGI_PARTITION=y
+CONFIG_ULTRIX_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf-8"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/bootinfo.h linux-2.6.30/arch/mips/include/asm/bootinfo.h
--- linux-2.6.30.orig/arch/mips/include/asm/bootinfo.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/bootinfo.h	2009-06-14 20:25:19.000000000 +0200
@@ -7,6 +7,7 @@
  * Copyright (C) 1995, 1996 Andreas Busse
  * Copyright (C) 1995, 1996 Stoned Elipot
  * Copyright (C) 1995, 1996 Paul M. Antoine.
+ * Copyright (C) 2009       Zhang Le
  */
 #ifndef _ASM_BOOTINFO_H
 #define _ASM_BOOTINFO_H
@@ -57,6 +58,16 @@
 #define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
 #define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
 
+/*
+ * Valid machtype for group Loongson
+ */
+#define MACH_LOONGSON_UNKNOWN  0
+#define MACH_LEMOTE_FL2E       1
+#define MACH_LEMOTE_FL2F       2
+#define MACH_LEMOTE_YL2F89     3
+#define MACH_LEMOTE_YL2F7      4
+#define MACH_LOONGSON_END      5
+
 #define CL_SIZE			COMMAND_LINE_SIZE
 
 extern char *system_type;
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h linux-2.6.30/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,59 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
- * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
- * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
- *
- * reference: /proc/cpuinfo,
- * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
- * 	arch/mips/kernel/proc.c(show_cpuinfo),
- *      loongson2f user manual.
- */
-
-#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_dcache_line_size()	32
-#define cpu_icache_line_size()	32
-#define cpu_scache_line_size()	32
-
-
-#define cpu_has_32fpr		1
-#define cpu_has_3k_cache	0
-#define cpu_has_4k_cache	1
-#define cpu_has_4kex		1
-#define cpu_has_64bits		1
-#define cpu_has_cache_cdex_p	0
-#define cpu_has_cache_cdex_s	0
-#define cpu_has_counter		1
-#define cpu_has_dc_aliases	1
-#define cpu_has_divec		0
-#define cpu_has_dsp		0
-#define cpu_has_ejtag		0
-#define cpu_has_fpu		1
-#define cpu_has_ic_fills_f_dc	0
-#define cpu_has_inclusive_pcaches	1
-#define cpu_has_llsc 		1
-#define cpu_has_mcheck		0
-#define cpu_has_mdmx		0
-#define cpu_has_mips16		0
-#define cpu_has_mips32r1	0
-#define cpu_has_mips32r2	0
-#define cpu_has_mips3d		0
-#define cpu_has_mips64r1	0
-#define cpu_has_mips64r2	0
-#define cpu_has_mipsmt		0
-#define cpu_has_prefetch	0
-#define cpu_has_smartmips	0
-#define cpu_has_tlb		1
-#define cpu_has_tx39_cache	0
-#define cpu_has_userlocal	0
-#define cpu_has_vce		0
-#define cpu_has_vtag_icache	0
-#define cpu_has_watch		1
-#define cpu_icache_snoops_remote_store	1
-
-#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/dma-coherence.h linux-2.6.30/arch/mips/include/asm/mach-lemote/dma-coherence.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/dma-coherence.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/mach-lemote/dma-coherence.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,66 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- */
-#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H
-#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-					  size_t size)
-{
-	return virt_to_phys(addr) | 0x80000000;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-					       struct page *page)
-{
-	return page_to_phys(page) | 0x80000000;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
-{
-	return dma_addr & 0x7fffffff;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-	return;
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/mc146818rtc.h linux-2.6.30/arch/mips/include/asm/mach-lemote/mc146818rtc.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/mc146818rtc.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/mach-lemote/mc146818rtc.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,36 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
- *
- * RTC routines for PC style attached Dallas chip.
- */
-#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H
-#define __ASM_MACH_LEMOTE_MC146818RTC_H
-
-#include <linux/io.h>
-
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_IRQ		8
-
-static inline unsigned char CMOS_READ(unsigned long addr)
-{
-	outb_p(addr, RTC_PORT(0));
-	return inb_p(RTC_PORT(1));
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
-{
-	outb_p(addr, RTC_PORT(0));
-	outb_p(data, RTC_PORT(1));
-}
-
-#define RTC_ALWAYS_BCD	0
-
-#ifndef mc146818_decode_year
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
-#endif
-
-#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/pci.h linux-2.6.30/arch/mips/include/asm/mach-lemote/pci.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/pci.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/mach-lemote/pci.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,30 +0,0 @@
-/*
- * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
- * 02139, USA.
- */
-
-#ifndef _LEMOTE_PCI_H_
-#define _LEMOTE_PCI_H_
-
-#define LOONGSON2E_PCI_MEM_START	0x14000000UL
-#define LOONGSON2E_PCI_MEM_END		0x1fffffffUL
-#define LOONGSON2E_PCI_IO_START		0x00004000UL
-#define LOONGSON2E_IO_PORT_BASE		0x1fd00000UL
-
-#endif /* !_LEMOTE_PCI_H_ */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/war.h linux-2.6.30/arch/mips/include/asm/mach-lemote/war.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-lemote/war.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/mach-lemote/war.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H
-#define __ASM_MIPS_MACH_LEMOTE_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR	0
-#define R4600_V1_HIT_CACHEOP_WAR	0
-#define R4600_V2_HIT_CACHEOP_WAR	0
-#define R5432_CP0_INTERRUPT_WAR		0
-#define BCM1250_M3_WAR			0
-#define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	0
-#define MIPS_CACHE_SYNC_WAR		0
-#define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
-#define ICACHE_REFILLS_WORKAROUND_WAR	0
-#define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR		0
-
-#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/clock.h linux-2.6.30/arch/mips/include/asm/mach-loongson/clock.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/clock.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/clock.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,64 @@
+#ifndef __ASM_MIPS_CLOCK_H
+#define __ASM_MIPS_CLOCK_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/clk.h>
+
+extern void (*cpu_wait) (void);
+
+struct clk;
+
+struct clk_ops {
+	void (*init) (struct clk *clk);
+	void (*enable) (struct clk *clk);
+	void (*disable) (struct clk *clk);
+	void (*recalc) (struct clk *clk);
+	int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id);
+	long (*round_rate) (struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+	struct list_head node;
+	const char *name;
+	int id;
+	struct module *owner;
+
+	struct clk *parent;
+	struct clk_ops *ops;
+
+	struct kref kref;
+
+	unsigned long rate;
+	unsigned long flags;
+};
+
+#define CLK_ALWAYS_ENABLED	(1 << 0)
+#define CLK_RATE_PROPAGATES	(1 << 1)
+
+/* Should be defined by processor-specific code */
+void arch_init_clk_ops(struct clk_ops **, int type);
+
+int clk_init(void);
+
+int __clk_enable(struct clk *);
+void __clk_disable(struct clk *);
+
+void clk_recalc_rate(struct clk *);
+
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+
+/* the exported API, in addition to clk_set_rate */
+/**
+ * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ * @algo_id: algorithm id to be passed down to ops->set_rate
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
+
+#endif				/* __ASM_MIPS_CLOCK_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cmdline.h linux-2.6.30/arch/mips/include/asm/mach-loongson/cmdline.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cmdline.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/cmdline.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,9 @@
+/* machine-specific command line initialization */
+#ifdef CONFIG_SYS_HAS_MACH_PROM_INIT_CMDLINE
+extern void __init mach_prom_init_cmdline(void);
+#else
+void __init mach_prom_init_cmdline(void)
+{
+}
+#endif
+
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h linux-2.6.30/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * 	arch/mips/kernel/proc.c(show_cpuinfo),
+ *      loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+
+#define cpu_has_32fpr		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_4kex		1
+#define cpu_has_64bits		1
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_counter		1
+#define cpu_has_dc_aliases	1
+#define cpu_has_divec		0
+#define cpu_has_dsp		0
+#define cpu_has_ejtag		0
+#define cpu_has_fpu		1
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_has_llsc 		1
+#define cpu_has_mcheck		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips16		0
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips3d		0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+#define cpu_has_mipsmt		0
+#define cpu_has_prefetch	0
+#define cpu_has_smartmips	0
+#define cpu_has_tlb		1
+#define cpu_has_tx39_cache	0
+#define cpu_has_userlocal	0
+#define cpu_has_vce		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_watch		1
+#define cpu_icache_snoops_remote_store	1
+
+#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h linux-2.6.30/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,382 @@
+/*
+ * The header file of cs5536 sourth bridge.
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu <liujl@lemote.com>
+ */
+
+#ifndef	_CS5536_H
+#define	_CS5536_H
+
+#include <linux/types.h>
+
+extern void _rdmsr(u32 msr, u32 *hi, u32 *lo);
+extern void _wrmsr(u32 msr, u32 hi, u32 lo);
+
+/*
+ * MSR module base
+ */
+#define	CS5536_SB_MSR_BASE	(0x00000000)
+#define	CS5536_GLIU_MSR_BASE	(0x10000000)
+#define	CS5536_ILLEGAL_MSR_BASE	(0x20000000)
+#define	CS5536_USB_MSR_BASE	(0x40000000)
+#define	CS5536_IDE_MSR_BASE	(0x60000000)
+#define	CS5536_DIVIL_MSR_BASE	(0x80000000)
+#define	CS5536_ACC_MSR_BASE	(0xa0000000)
+#define	CS5536_UNUSED_MSR_BASE	(0xc0000000)
+#define	CS5536_GLCP_MSR_BASE	(0xe0000000)
+
+#define	SB_MSR_REG(offset)	(CS5536_SB_MSR_BASE	| (offset))
+#define	GLIU_MSR_REG(offset)	(CS5536_GLIU_MSR_BASE	| (offset))
+#define	ILLEGAL_MSR_REG(offset)	(CS5536_ILLEGAL_MSR_BASE | (offset))
+#define	USB_MSR_REG(offset)	(CS5536_USB_MSR_BASE	| (offset))
+#define	IDE_MSR_REG(offset)	(CS5536_IDE_MSR_BASE	| (offset))
+#define	DIVIL_MSR_REG(offset)	(CS5536_DIVIL_MSR_BASE	| (offset))
+#define	ACC_MSR_REG(offset)	(CS5536_ACC_MSR_BASE	| (offset))
+#define	UNUSED_MSR_REG(offset)	(CS5536_UNUSED_MSR_BASE	| (offset))
+#define	GLCP_MSR_REG(offset)	(CS5536_GLCP_MSR_BASE	| (offset))
+
+/*
+ * BAR SPACE OF VIRTUAL PCI :
+ * range for pci probe use, length is the actual size.
+ */
+/* IO space for all DIVIL modules */
+#define	CS5536_IRQ_RANGE	0xffffffe0 /* USERD FOR PCI PROBE */
+#define	CS5536_IRQ_LENGTH	0x20	/* THE REGS ACTUAL LENGTH */
+#define	CS5536_SMB_RANGE	0xfffffff8
+#define	CS5536_SMB_LENGTH	0x08
+#define	CS5536_GPIO_RANGE	0xffffff00
+#define	CS5536_GPIO_LENGTH	0x100
+#define	CS5536_MFGPT_RANGE	0xffffffc0
+#define	CS5536_MFGPT_LENGTH	0x40
+#define	CS5536_ACPI_RANGE	0xffffffe0
+#define	CS5536_ACPI_LENGTH	0x20
+#define	CS5536_PMS_RANGE	0xffffff80
+#define	CS5536_PMS_LENGTH	0x80
+/* MEM space for 4KB nand flash; IO space for 16B nor flash. */
+#ifdef	CS5536_NOR_FLASH
+#define	CS5536_FLSH_LENGTH	0x10
+#define	CS5536_FLSH_RANGE	0xfffffff0
+#else
+#define	CS5536_FLSH_RANGE	0xfffff000
+#define	CS5536_FLSH_LENGTH	0x1000
+#endif
+/* IO space for IDE */
+#define	CS5536_IDE_RANGE	0xfffffff0
+#define	CS5536_IDE_LENGTH	0x10
+/* IO space for ACC */
+#define	CS5536_ACC_RANGE	0xffffff80
+#define	CS5536_ACC_LENGTH	0x80
+/* MEM space for ALL USB modules */
+#define	CS5536_OHCI_RANGE	0xfffff000
+#define	CS5536_OHCI_LENGTH	0x1000
+#define	CS5536_EHCI_RANGE	0xfffff000
+#define	CS5536_EHCI_LENGTH	0x1000
+#define	CS5536_UDC_RANGE	0xffffe000
+#define	CS5536_UDC_LENGTH	0x2000
+#define	CS5536_OTG_RANGE	0xfffff000
+#define	CS5536_OTG_LENGTH	0x1000
+
+/*
+ * PCI MSR ACCESS
+ */
+#define	PCI_MSR_CTRL		0xF0
+#define	PCI_MSR_ADDR		0xF4
+#define	PCI_MSR_DATA_LO		0xF8
+#define	PCI_MSR_DATA_HI		0xFC
+
+/**************** MSR *****************************/
+
+/*
+ * GLIU STANDARD MSR
+ */
+#define	GLIU_CAP		0x00
+#define	GLIU_CONFIG		0x01
+#define	GLIU_SMI		0x02
+#define	GLIU_ERROR		0x03
+#define	GLIU_PM			0x04
+#define	GLIU_DIAG		0x05
+
+/*
+ * GLIU SPEC. MSR
+ */
+#define	GLIU_P2D_BM0		0x20
+#define	GLIU_P2D_BM1		0x21
+#define	GLIU_P2D_BM2		0x22
+#define	GLIU_P2D_BMK0		0x23
+#define	GLIU_P2D_BMK1		0x24
+#define	GLIU_P2D_BM3		0x25
+#define	GLIU_P2D_BM4		0x26
+#define	GLIU_COH		0x80
+#define	GLIU_PAE		0x81
+#define	GLIU_ARB		0x82
+#define	GLIU_ASMI		0x83
+#define	GLIU_AERR		0x84
+#define	GLIU_DEBUG		0x85
+#define	GLIU_PHY_CAP		0x86
+#define	GLIU_NOUT_RESP		0x87
+#define	GLIU_NOUT_WDATA		0x88
+#define	GLIU_WHOAMI		0x8B
+#define	GLIU_SLV_DIS		0x8C
+#define	GLIU_IOD_BM0		0xE0
+#define	GLIU_IOD_BM1		0xE1
+#define	GLIU_IOD_BM2		0xE2
+#define	GLIU_IOD_BM3		0xE3
+#define	GLIU_IOD_BM4		0xE4
+#define	GLIU_IOD_BM5		0xE5
+#define	GLIU_IOD_BM6		0xE6
+#define	GLIU_IOD_BM7		0xE7
+#define	GLIU_IOD_BM8		0xE8
+#define	GLIU_IOD_BM9		0xE9
+#define	GLIU_IOD_SC0		0xEA
+#define	GLIU_IOD_SC1		0xEB
+#define	GLIU_IOD_SC2		0xEC
+#define	GLIU_IOD_SC3		0xED
+#define	GLIU_IOD_SC4		0xEE
+#define	GLIU_IOD_SC5		0xEF
+#define	GLIU_IOD_SC6		0xF0
+#define	GLIU_IOD_SC7		0xF1
+
+/*
+ * SB STANDARD
+ */
+#define	SB_CAP		0x00
+#define	SB_CONFIG	0x01
+#define	SB_SMI		0x02
+#define	SB_ERROR	0x03
+#define	SB_MAR_ERR_EN		0x00000001
+#define	SB_TAR_ERR_EN		0x00000002
+#define	SB_RSVD_BIT1		0x00000004
+#define	SB_EXCEP_ERR_EN		0x00000008
+#define	SB_SYSE_ERR_EN		0x00000010
+#define	SB_PARE_ERR_EN		0x00000020
+#define	SB_TAS_ERR_EN		0x00000040
+#define	SB_MAR_ERR_FLAG		0x00010000
+#define	SB_TAR_ERR_FLAG		0x00020000
+#define	SB_RSVD_BIT2		0x00040000
+#define	SB_EXCEP_ERR_FLAG	0x00080000
+#define	SB_SYSE_ERR_FLAG	0x00100000
+#define	SB_PARE_ERR_FLAG	0x00200000
+#define	SB_TAS_ERR_FLAG		0x00400000
+#define	SB_PM		0x04
+#define	SB_DIAG		0x05
+
+/*
+ * SB SPEC.
+ */
+#define	SB_CTRL		0x10
+#define	SB_R0		0x20
+#define	SB_R1		0x21
+#define	SB_R2		0x22
+#define	SB_R3		0x23
+#define	SB_R4		0x24
+#define	SB_R5		0x25
+#define	SB_R6		0x26
+#define	SB_R7		0x27
+#define	SB_R8		0x28
+#define	SB_R9		0x29
+#define	SB_R10		0x2A
+#define	SB_R11		0x2B
+#define	SB_R12		0x2C
+#define	SB_R13		0x2D
+#define	SB_R14		0x2E
+#define	SB_R15		0x2F
+
+/*
+ * GLCP STANDARD
+ */
+#define	GLCP_CAP		0x00
+#define	GLCP_CONFIG		0x01
+#define	GLCP_SMI		0x02
+#define	GLCP_ERROR		0x03
+#define	GLCP_PM			0x04
+#define	GLCP_DIAG		0x05
+
+/*
+ * GLCP SPEC.
+ */
+#define	GLCP_CLK_DIS_DELAY	0x08
+#define	GLCP_PM_CLK_DISABLE	0x09
+#define	GLCP_GLB_PM		0x0B
+#define	GLCP_DBG_OUT		0x0C
+#define	GLCP_RSVD1		0x0D
+#define	GLCP_SOFT_COM		0x0E
+#define	SOFT_BAR_SMB_FLAG	0x00000001
+#define	SOFT_BAR_GPIO_FLAG	0x00000002
+#define	SOFT_BAR_MFGPT_FLAG	0x00000004
+#define	SOFT_BAR_IRQ_FLAG	0x00000008
+#define	SOFT_BAR_PMS_FLAG	0x00000010
+#define	SOFT_BAR_ACPI_FLAG	0x00000020
+#define	SOFT_BAR_FLSH0_FLAG	0x00000040
+#define	SOFT_BAR_FLSH1_FLAG	0x00000080
+#define	SOFT_BAR_FLSH2_FLAG	0x00000100
+#define	SOFT_BAR_FLSH3_FLAG	0x00000200
+#define	SOFT_BAR_IDE_FLAG	0x00000400
+#define	SOFT_BAR_ACC_FLAG	0x00000800
+#define	SOFT_BAR_OHCI_FLAG	0x00001000
+#define	SOFT_BAR_EHCI_FLAG	0x00002000
+#define	SOFT_BAR_UDC_FLAG	0x00004000
+#define	SOFT_BAR_OTG_FLAG	0x00008000
+#define	GLCP_RSVD2		0x0F
+#define	GLCP_CLK_OFF		0x10
+#define	GLCP_CLK_ACTIVE		0x11
+#define	GLCP_CLK_DISABLE	0x12
+#define	GLCP_CLK4ACK		0x13
+#define	GLCP_SYS_RST		0x14
+#define	GLCP_RSVD3		0x15
+#define	GLCP_DBG_CLK_CTRL	0x16
+#define	GLCP_CHIP_REV_ID	0x17
+
+/*
+ * DIVIL STANDARD
+ */
+#define	DIVIL_CAP		0x00
+#define	DIVIL_CONFIG		0x01
+#define	DIVIL_SMI		0x02
+#define	DIVIL_ERROR		0x03
+#define	DIVIL_PM		0x04
+#define	DIVIL_DIAG		0x05
+
+/*
+ * DIVIL SPEC.
+ */
+#define	DIVIL_LBAR_IRQ		0x08
+#define	DIVIL_LBAR_KEL		0x09
+#define	DIVIL_LBAR_SMB		0x0B
+#define	DIVIL_LBAR_GPIO		0x0C
+#define	DIVIL_LBAR_MFGPT	0x0D
+#define	DIVIL_LBAR_ACPI		0x0E
+#define	DIVIL_LBAR_PMS		0x0F
+#define	DIVIL_LBAR_FLSH0	0x10
+#define	DIVIL_LBAR_FLSH1	0x11
+#define	DIVIL_LBAR_FLSH2	0x12
+#define	DIVIL_LBAR_FLSH3	0x13
+#define	DIVIL_LEG_IO		0x14
+#define	DIVIL_BALL_OPTS		0x15
+#define	DIVIL_SOFT_IRQ		0x16
+#define	DIVIL_SOFT_RESET	0x17
+/* NOR FLASH */
+#define	NORF_CTRL		0x18
+#define	NORF_T01		0x19
+#define	NORF_T23		0x1A
+/* NAND FLASH */
+#define	NANDF_DATA		0x1B
+#define	NANDF_CTRL		0x1C
+#define	NANDF_RSVD		0x1D
+/* KEL Keyboard Emulation Logic */
+#define	KEL_CTRL		0x1F
+/* PIC */
+#define	PIC_YSEL_LOW		0x20
+#define	PIC_YSEL_LOW_USB_SHIFT		8
+#define	PIC_YSEL_LOW_ACC_SHIFT		16
+#define	PIC_YSEL_LOW_FLASH_SHIFT	24
+#define	PIC_YSEL_HIGH		0x21
+#define	PIC_ZSEL_LOW		0x22
+#define	PIC_ZSEL_HIGH		0x23
+#define	PIC_IRQM_PRIM		0x24
+#define	PIC_IRQM_LPC		0x25
+#define	PIC_XIRR_STS_LOW	0x26
+#define	PIC_XIRR_STS_HIGH	0x27
+#define	PCI_SHDW		0x34
+/* MFGPT */
+#define	MFGPT_IRQ		0x28
+#define	MFGPT_NR		0x29
+#define	MFGPT_RSVD		0x2A
+#define	MFGPT_SETUP		0x2B
+/* FLOPPY */
+#define	FLPY_3F2_SHDW		0x30
+#define	FLPY_3F7_SHDW		0x31
+#define	FLPY_372_SHDW		0x32
+#define	FLPY_377_SHDW		0x33
+/* PIT */
+#define	PIT_SHDW		0x36
+#define	PIT_CNTRL		0x37
+/* UART */
+#define	UART1_MOD		0x38
+#define	UART1_DONG		0x39
+#define	UART1_CONF		0x3A
+#define	UART1_RSVD		0x3B
+#define	UART2_MOD		0x3C
+#define	UART2_DONG		0x3D
+#define	UART2_CONF		0x3E
+#define	UART2_RSVD		0x3F
+/* DMA */
+#define	DIVIL_AC_DMA		0x1E
+#define	DMA_MAP			0x40
+#define	DMA_SHDW_CH0		0x41
+#define	DMA_SHDW_CH1		0x42
+#define	DMA_SHDW_CH2		0x43
+#define	DMA_SHDW_CH3		0x44
+#define	DMA_SHDW_CH4		0x45
+#define	DMA_SHDW_CH5		0x46
+#define	DMA_SHDW_CH6		0x47
+#define	DMA_SHDW_CH7		0x48
+#define	DMA_MSK_SHDW		0x49
+/* LPC */
+#define	LPC_EADDR		0x4C
+#define	LPC_ESTAT		0x4D
+#define	LPC_SIRQ		0x4E
+#define	LPC_RSVD		0x4F
+/* PMC */
+#define	PMC_LTMR		0x50
+#define	PMC_RSVD		0x51
+/* RTC */
+#define	RTC_RAM_LOCK		0x54
+#define	RTC_DOMA_OFFSET		0x55
+#define	RTC_MONA_OFFSET		0x56
+#define	RTC_CEN_OFFSET		0x57
+
+/*
+ * IDE STANDARD
+ */
+#define	IDE_CAP		0x00
+#define	IDE_CONFIG	0x01
+#define	IDE_SMI		0x02
+#define	IDE_ERROR	0x03
+#define	IDE_PM		0x04
+#define	IDE_DIAG	0x05
+
+/*
+ * IDE SPEC.
+ */
+#define	IDE_IO_BAR	0x08
+#define	IDE_CFG		0x10
+#define	IDE_DTC		0x12
+#define	IDE_CAST	0x13
+#define	IDE_ETC		0x14
+#define	IDE_INTERNAL_PM	0x15
+
+/*
+ * ACC STANDARD
+ */
+#define	ACC_CAP		0x00
+#define	ACC_CONFIG	0x01
+#define	ACC_SMI		0x02
+#define	ACC_ERROR	0x03
+#define	ACC_PM		0x04
+#define	ACC_DIAG	0x05
+
+/*
+ * USB STANDARD
+ */
+#define	USB_CAP		0x00
+#define	USB_CONFIG	0x01
+#define	USB_SMI		0x02
+#define	USB_ERROR	0x03
+#define	USB_PM		0x04
+#define	USB_DIAG	0x05
+
+/*
+ * USB SPEC.
+ */
+#define	USB_OHCI	0x08
+#define	USB_EHCI	0x09
+#define	USB_UDC		0x0A
+#define	USB_OTG		0x0B
+
+/****************** NATIVE ***************************/
+/* GPIO : I/O SPACE; REG : 32BITS */
+#define	GPIOL_OUT_VAL		0x00
+#define	GPIOL_OUT_EN		0x04
+
+#endif				/* _CS5536_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h linux-2.6.30/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,26 @@
+/*
+ * cs5536 mfgpt header file
+ */
+
+#ifndef _CS5536_MFGPT_H
+#define _CS5536_MFGPT_H
+
+#include <cs5536/cs5536.h>
+
+extern void setup_mfgpt_timer(void);
+
+#if 1
+#define MFGPT_TICK_RATE 14318000
+#else
+#define MFGPT_TICK_RATE (14318180 / 8)
+#endif
+#define COMPARE  ((MFGPT_TICK_RATE + HZ/2) / HZ)
+
+#define	CS5536_MFGPT_INTR	5
+
+#define MFGPT_BASE	mfgpt_base
+#define MFGPT0_CMP2	(MFGPT_BASE + 2)
+#define MFGPT0_CNT	(MFGPT_BASE + 4)
+#define MFGPT0_SETUP	(MFGPT_BASE + 6)
+
+#endif /*!_CS5536_MFGPT_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h linux-2.6.30/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,174 @@
+/*
+ * the definition file of cs5536 Virtual Support Module(VSM).
+ * pci configuration space can be accessed through the VSM, so
+ * there is no need of the MSR read/write now, except the spec.
+ * MSR registers which are not implemented yet.
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ */
+
+#ifndef	_CS5536_PCI_H
+#define	_CS5536_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci_regs.h>
+
+extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
+extern u32 cs5536_pci_conf_read4(int function, int reg);
+
+#define	CS5536_FLASH_INTR	6
+#define	CS5536_ACC_INTR		9
+#define	CS5536_IDE_INTR		14
+#define	CS5536_USB_INTR		11
+#define	CS5536_UART1_INTR	4
+#define	CS5536_UART2_INTR	3
+
+/************** PCI BUS DEVICE FUNCTION ***************/
+
+/*
+ * PCI bus device function
+ */
+#define	PCI_BUS_CS5536		0
+#define	PCI_IDSEL_CS5536	14
+
+/********** STANDARD PCI-2.2 EXPANSION ****************/
+
+/*
+ * PCI configuration space
+ * we have to virtualize the PCI configure space head, so we should
+ * define the necessary IDs and some others.
+ */
+
+/* CONFIG of PCI VENDOR ID*/
+#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \
+	(((mod_dev_id) << 16) | (sys_vendor_id))
+
+/* VENDOR ID */
+#define	CS5536_VENDOR_ID	0x1022
+
+/* DEVICE ID */
+#define	CS5536_ISA_DEVICE_ID		0x2090
+#define	CS5536_FLASH_DEVICE_ID		0x2091
+#define	CS5536_IDE_DEVICE_ID		0x209a
+#define	CS5536_ACC_DEVICE_ID		0x2093
+#define	CS5536_OHCI_DEVICE_ID		0x2094
+#define	CS5536_EHCI_DEVICE_ID		0x2095
+#define	CS5536_UDC_DEVICE_ID		0x2096
+#define	CS5536_OTG_DEVICE_ID		0x2097
+
+/* CLASS CODE : CLASS SUB-CLASS INTERFACE */
+#define	CS5536_ISA_CLASS_CODE		0x060100
+#define	CS5536_FLASH_CLASS_CODE		0x050100
+#define CS5536_IDE_CLASS_CODE		0x010180
+#define	CS5536_ACC_CLASS_CODE		0x040100
+#define	CS5536_OHCI_CLASS_CODE		0x0C0310
+#define	CS5536_EHCI_CLASS_CODE		0x0C0320
+#define	CS5536_UDC_CLASS_CODE		0x0C03FE
+#define	CS5536_OTG_CLASS_CODE		0x0C0380
+
+/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */
+
+#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer)	\
+	((PCI_NONE_BIST << 24) | ((header_type) << 16) \
+		| ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE);
+
+#define	PCI_NONE_BIST			0x00	/* RO not implemented yet. */
+#define	PCI_BRIDGE_HEADER_TYPE		0x80	/* RO */
+#define	PCI_NORMAL_HEADER_TYPE		0x00
+#define	PCI_NORMAL_LATENCY_TIMER	0x00
+#define	PCI_NORMAL_CACHE_LINE_SIZE	0x08	/* RW */
+
+/* BAR */
+#define	PCI_BAR0_REG			0x10
+#define	PCI_BAR1_REG			0x14
+#define	PCI_BAR2_REG			0x18
+#define	PCI_BAR3_REG			0x1c
+#define	PCI_BAR4_REG			0x20
+#define	PCI_BAR5_REG			0x24
+#define	PCI_BAR_COUNT			6
+#define	PCI_BAR_RANGE_MASK		0xFFFFFFFF
+
+/* CARDBUS CIS POINTER */
+#define	PCI_CARDBUS_CIS_POINTER		0x00000000
+
+/* SUBSYSTEM VENDOR ID  */
+#define	CS5536_SUB_VENDOR_ID		CS5536_VENDOR_ID
+
+/* SUBSYSTEM ID */
+#define	CS5536_ISA_SUB_ID		CS5536_ISA_DEVICE_ID
+#define	CS5536_FLASH_SUB_ID		CS5536_FLASH_DEVICE_ID
+#define	CS5536_IDE_SUB_ID		CS5536_IDE_DEVICE_ID
+#define	CS5536_ACC_SUB_ID		CS5536_ACC_DEVICE_ID
+#define	CS5536_OHCI_SUB_ID		CS5536_OHCI_DEVICE_ID
+#define	CS5536_EHCI_SUB_ID		CS5536_EHCI_DEVICE_ID
+#define	CS5536_UDC_SUB_ID		CS5536_UDC_DEVICE_ID
+#define	CS5536_OTG_SUB_ID		CS5536_OTG_DEVICE_ID
+
+/* EXPANSION ROM BAR */
+#define	PCI_EXPANSION_ROM_BAR		0x00000000
+
+/* CAPABILITIES POINTER */
+#define	PCI_CAPLIST_POINTER		0x00000000
+#define PCI_CAPLIST_USB_POINTER		0x40
+/* INTERRUPT */
+
+#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \
+	((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \
+		((pin) << 8) | (mod_intr))
+
+#define	PCI_MAX_LATENCY			0x40
+#define	PCI_MIN_GRANT			0x00
+#define	PCI_DEFAULT_PIN			0x01
+
+/*********** EXPANSION PCI REG ************************/
+
+/*
+ * ISA EXPANSION
+ */
+#define	PCI_UART1_INT_REG 	0x50
+#define PCI_UART2_INT_REG	0x54
+#define	PCI_ISA_FIXUP_REG	0x58
+
+/*
+ * FLASH EXPANSION
+ */
+#define	PCI_FLASH_INT_REG		0x50
+#define	PCI_NOR_FLASH_CTRL_REG		0x40
+#define	PCI_NOR_FLASH_T01_REG		0x44
+#define	PCI_NOR_FLASH_T23_REG		0x48
+#define	PCI_NAND_FLASH_TDATA_REG	0x60
+#define	PCI_NAND_FLASH_TCTRL_REG	0x64
+#define	PCI_NAND_FLASH_RSVD_REG		0x68
+#define	PCI_FLASH_SELECT_REG		0x70
+
+/*
+ * IDE EXPANSION
+ */
+#define	PCI_IDE_CFG_REG		0x40
+#define	CS5536_IDE_FLASH_SIGNATURE	0xDEADBEEF
+#define	PCI_IDE_DTC_REG		0x48
+#define	PCI_IDE_CAST_REG	0x4C
+#define	PCI_IDE_ETC_REG		0x50
+#define	PCI_IDE_PM_REG		0x54
+#define	PCI_IDE_INT_REG		0x60
+
+/*
+ * ACC EXPANSION
+ */
+#define	PCI_ACC_INT_REG		0x50
+
+/*
+ * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI
+ */
+#define	PCI_OHCI_PM_REG		0x40
+#define	PCI_OHCI_INT_REG	0x50
+
+/*
+ * EHCI EXPANSION
+ */
+#define	PCI_EHCI_LEGSMIEN_REG	0x50
+#define	PCI_EHCI_LEGSMISTS_REG	0x54
+#define	PCI_EHCI_FLADJ_REG	0x60
+
+#endif				/* _CS5536_PCI_H_ */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h linux-2.6.30/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,59 @@
+/*
+ * the Virtual Support Module(VSM) read/write interfaces
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
+#ifndef	_CS5536_VSM_H
+#define	_CS5536_VSM_H
+
+#include <linux/types.h>
+
+#define DECLARE_CS5536_MODULE(name) \
+extern void pci_##name##_write_reg(int reg, u32 value); \
+extern u32 pci_##name##_read_reg(int reg);
+
+#define DEFINE_CS5536_MODULE(name) \
+void pci_##name##_write_reg(int reg, u32 value)\
+{						\
+	return;					\
+}						\
+u32 pci_##name##_read_reg(int reg)		\
+{						\
+	return 0xffffffff;			\
+}						\
+
+/* core modules of cs5536 */
+
+/* ide module */
+DECLARE_CS5536_MODULE(ide)
+/* acc module */
+DECLARE_CS5536_MODULE(acc)
+/* ohci module */
+DECLARE_CS5536_MODULE(ohci)
+/* isa module */
+DECLARE_CS5536_MODULE(isa)
+/* ehci module */
+DECLARE_CS5536_MODULE(ehci)
+
+/* selective modules of cs5536 */
+/* flash(nor or nand flash) module */
+#ifdef CONFIG_CS5536_FLASH
+    DECLARE_CS5536_MODULE(flash)
+#else
+    DEFINE_CS5536_MODULE(flash)
+#endif
+/* otg module */
+#ifdef CONFIG_CS5536_OTG
+    DECLARE_CS5536_MODULE(otg)
+#else
+    DEFINE_CS5536_MODULE(otg)
+#endif
+/* udc module */
+#ifdef CONFIG_CS5536_UDC
+    DECLARE_CS5536_MODULE(udc)
+#else
+    DEFINE_CS5536_MODULE(udc)
+#endif
+#endif				/* _CS5536_VSM_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/dma-coherence.h linux-2.6.30/arch/mips/include/asm/mach-loongson/dma-coherence.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/dma-coherence.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/dma-coherence.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,70 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ */
+#ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
+#define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+					  size_t size)
+{
+	return virt_to_phys(addr) | 0x80000000;
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+					       struct page *page)
+{
+	return page_to_phys(page) | 0x80000000;
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+#if defined(CONFIG_CPU_LOONGSON2F) & defined(CONFIG_64BIT)
+	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
+#else
+	return dma_addr & 0x7fffffff;
+#endif
+}
+
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s,
+	 * so we can't guarantee allocations that must be
+	 * within a tighter range than GFP_DMA..
+	 */
+	if (mask < DMA_BIT_MASK(24))
+		return 0;
+
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/loongson.h linux-2.6.30/arch/mips/include/asm/mach-loongson/loongson.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/loongson.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/loongson.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,319 @@
+/*
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LOONGSON_H
+#define __LOONGSON_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+
+/* loongson internal northbridge initialization */
+extern void bonito_irq_init(void);
+
+/* environment arguments from bootloader */
+extern unsigned long bus_clock, cpu_clock_freq;
+extern unsigned long memsize, highmemsize;
+
+/* loongson-based machines specific reboot setup */
+extern void loongson_reboot_setup(void);
+
+/* loongson-specific command line, env and memory initialization */
+extern void __init prom_init_memory(void);
+extern void __init prom_init_cmdline(void);
+extern void __init prom_init_env(void);
+
+/* irq operation functions */
+extern void bonito_irqdispatch(void);
+extern void i8259_irqdispatch(void);
+extern void __init bonito_irq_init(void);
+extern void __init set_irq_trigger_mode(void);
+extern int mach_i8259_irq(void);
+extern void mach_irq_dispatch(unsigned int pending);
+
+/* machine-specific reboot/halt operation */
+extern void mach_prepare_reboot(void);
+extern void mach_prepare_shutdown(void);
+
+/* We need this in some places... */
+#define delay()	({			\
+	int x;					\
+	for (x = 0; x < 100000; x++)  \
+		__asm__ __volatile__(""); \
+})
+
+/* loongson-specific cpu frequency relative stuff */
+#ifdef CONFIG_LOONGSON2F_CPU_FREQ
+#include <linux/cpufreq.h>
+extern void loongson2f_cpu_wait(void);
+extern struct cpufreq_frequency_table loongson2f_clockmod_table[];
+#endif
+
+#define LOONGSON_REG(x) \
+	(*(u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
+
+#define LOONGSON_IRQ_BASE	32
+#define LOONGSON_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
+
+#define LOONGSON_FLASH_BASE	0x1c000000
+#define LOONGSON_FLASH_SIZE	0x02000000	/* 32M */
+#define LOONGSON_FLASH_TOP	(LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1)
+
+#define LOONGSON_LIO0_BASE	0x1e000000
+#define LOONGSON_LIO0_SIZE	0x01C00000	/* 28M */
+#define LOONGSON_LIO0_TOP	(LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1)
+
+#define LOONGSON_BOOT_BASE	0x1fc00000
+#define LOONGSON_BOOT_SIZE	0x00100000	/* 1M */
+#define LOONGSON_BOOT_TOP 	(LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1)
+#define LOONGSON_REG_BASE 	0x1fe00000
+#define LOONGSON_REG_SIZE 	0x00100000	/* 256Bytes + 256Bytes + ??? */
+#define LOONGSON_REG_TOP	(LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
+
+#define LOONGSON_LIO1_BASE 	0x1ff00000
+#define LOONGSON_LIO1_SIZE 	0x00100000	/* 1M */
+#define LOONGSON_LIO1_TOP	(LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1)
+
+#define LOONGSON_PCILO0_BASE	0x10000000
+#define LOONGSON_PCILO1_BASE	0x14000000
+#define LOONGSON_PCILO2_BASE	0x18000000
+#define LOONGSON_PCILO_BASE	LOONGSON_PCILO0_BASE
+#define LOONGSON_PCILO_SIZE	0x0c000000	/* 64M * 3 */
+#define LOONGSON_PCILO_TOP	(LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1)
+
+#define LOONGSON_PCICFG_BASE	0x1fe80000
+#define LOONGSON_PCICFG_SIZE	0x00000800	/* 2K */
+#define LOONGSON_PCICFG_TOP	(LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
+#define LOONGSON_PCIIO_BASE	0x1fd00000
+#define LOONGSON_PCIIO_SIZE	0x00100000	/* 1M */
+#define LOONGSON_PCIIO_TOP	(LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1)
+
+/* Loongson Register Bases */
+
+#define LOONGSON_PCICONFIGBASE	0x00
+#define LOONGSON_REGBASE	0x100
+
+/* PCI Configuration Registers */
+
+#define LOONGSON_PCI_REG(x)	LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x))
+#define LOONGSON_PCIDID		LOONGSON_PCI_REG(0x00)
+#define LOONGSON_PCICMD		LOONGSON_PCI_REG(0x04)
+#define LOONGSON_PCICLASS 	LOONGSON_PCI_REG(0x08)
+#define LOONGSON_PCILTIMER	LOONGSON_PCI_REG(0x0c)
+#define LOONGSON_PCIBASE0 	LOONGSON_PCI_REG(0x10)
+#define LOONGSON_PCIBASE1 	LOONGSON_PCI_REG(0x14)
+#define LOONGSON_PCIBASE2 	LOONGSON_PCI_REG(0x18)
+#define LOONGSON_PCIBASE3 	LOONGSON_PCI_REG(0x1c)
+#define LOONGSON_PCIBASE4 	LOONGSON_PCI_REG(0x20)
+#define LOONGSON_PCIEXPRBASE	LOONGSON_PCI_REG(0x30)
+#define LOONGSON_PCIINT		LOONGSON_PCI_REG(0x3c)
+
+#define LOONGSON_PCI_ISR4C	LOONGSON_PCI_REG(0x4c)
+
+#define LOONGSON_PCICMD_PERR_CLR	0x80000000
+#define LOONGSON_PCICMD_SERR_CLR	0x40000000
+#define LOONGSON_PCICMD_MABORT_CLR	0x20000000
+#define LOONGSON_PCICMD_MTABORT_CLR	0x10000000
+#define LOONGSON_PCICMD_TABORT_CLR	0x08000000
+#define LOONGSON_PCICMD_MPERR_CLR 	0x01000000
+#define LOONGSON_PCICMD_PERRRESPEN	0x00000040
+#define LOONGSON_PCICMD_ASTEPEN		0x00000080
+#define LOONGSON_PCICMD_SERREN		0x00000100
+#define LOONGSON_PCILTIMER_BUSLATENCY	0x0000ff00
+#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT	8
+
+/* Loongson h/w Configuration */
+
+#define LOONGSON_GENCFG_OFFSET		0x4
+#define LOONGSON_GENCFG	LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET)
+
+#define LOONGSON_GENCFG_DEBUGMODE	0x00000001
+#define LOONGSON_GENCFG_SNOOPEN		0x00000002
+#define LOONGSON_GENCFG_CPUSELFRESET	0x00000004
+
+#define LOONGSON_GENCFG_FORCE_IRQA	0x00000008
+#define LOONGSON_GENCFG_IRQA_ISOUT	0x00000010
+#define LOONGSON_GENCFG_IRQA_FROM_INT1	0x00000020
+#define LOONGSON_GENCFG_BYTESWAP	0x00000040
+
+#define LOONGSON_GENCFG_UNCACHED	0x00000080
+#define LOONGSON_GENCFG_PREFETCHEN	0x00000100
+#define LOONGSON_GENCFG_WBEHINDEN	0x00000200
+#define LOONGSON_GENCFG_CACHEALG	0x00000c00
+#define LOONGSON_GENCFG_CACHEALG_SHIFT	10
+#define LOONGSON_GENCFG_PCIQUEUE	0x00001000
+#define LOONGSON_GENCFG_CACHESTOP	0x00002000
+#define LOONGSON_GENCFG_MSTRBYTESWAP	0x00004000
+#define LOONGSON_GENCFG_BUSERREN	0x00008000
+#define LOONGSON_GENCFG_NORETRYTIMEOUT	0x00010000
+#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT	0x00020000
+
+/* PCI address map control */
+
+#define LOONGSON_PCIMAP			LOONGSON_REG(LOONGSON_REGBASE + 0x10)
+#define LOONGSON_PCIMEMBASECFG		LOONGSON_REG(LOONGSON_REGBASE + 0x14)
+#define LOONGSON_PCIMAP_CFG		LOONGSON_REG(LOONGSON_REGBASE + 0x18)
+
+/* GPIO Regs - r/w */
+
+#define LOONGSON_GPIODATA 		LOONGSON_REG(LOONGSON_REGBASE + 0x1c)
+#define LOONGSON_GPIOIE			LOONGSON_REG(LOONGSON_REGBASE + 0x20)
+
+/* ICU Configuration Regs - r/w */
+
+#define LOONGSON_INTEDGE		LOONGSON_REG(LOONGSON_REGBASE + 0x24)
+#define LOONGSON_INTSTEER 		LOONGSON_REG(LOONGSON_REGBASE + 0x28)
+#define LOONGSON_INTPOL			LOONGSON_REG(LOONGSON_REGBASE + 0x2c)
+
+/* ICU Enable Regs - IntEn & IntISR are r/o. */
+
+#define LOONGSON_INTENSET 		LOONGSON_REG(LOONGSON_REGBASE + 0x30)
+#define LOONGSON_INTENCLR 		LOONGSON_REG(LOONGSON_REGBASE + 0x34)
+#define LOONGSON_INTEN			LOONGSON_REG(LOONGSON_REGBASE + 0x38)
+#define LOONGSON_INTISR			LOONGSON_REG(LOONGSON_REGBASE + 0x3c)
+
+/* ICU */
+#define LOONGSON_ICU_MBOXES		0x0000000f
+#define LOONGSON_ICU_MBOXES_SHIFT 	0
+#define LOONGSON_ICU_DMARDY		0x00000010
+#define LOONGSON_ICU_DMAEMPTY		0x00000020
+#define LOONGSON_ICU_COPYRDY		0x00000040
+#define LOONGSON_ICU_COPYEMPTY		0x00000080
+#define LOONGSON_ICU_COPYERR		0x00000100
+#define LOONGSON_ICU_PCIIRQ		0x00000200
+#define LOONGSON_ICU_MASTERERR		0x00000400
+#define LOONGSON_ICU_SYSTEMERR		0x00000800
+#define LOONGSON_ICU_DRAMPERR		0x00001000
+#define LOONGSON_ICU_RETRYERR		0x00002000
+#define LOONGSON_ICU_GPIOS		0x01ff0000
+#define LOONGSON_ICU_GPIOS_SHIFT		16
+#define LOONGSON_ICU_GPINS		0x7e000000
+#define LOONGSON_ICU_GPINS_SHIFT		25
+#define LOONGSON_ICU_MBOX(N)		(1<<(LOONGSON_ICU_MBOXES_SHIFT+(N)))
+#define LOONGSON_ICU_GPIO(N)		(1<<(LOONGSON_ICU_GPIOS_SHIFT+(N)))
+#define LOONGSON_ICU_GPIN(N)		(1<<(LOONGSON_ICU_GPINS_SHIFT+(N)))
+
+/* PCI prefetch window base & mask */
+
+#define LOONGSON_MEM_WIN_BASE_L 	LOONGSON_REG(LOONGSON_REGBASE + 0x40)
+#define LOONGSON_MEM_WIN_BASE_H 	LOONGSON_REG(LOONGSON_REGBASE + 0x44)
+#define LOONGSON_MEM_WIN_MASK_L 	LOONGSON_REG(LOONGSON_REGBASE + 0x48)
+#define LOONGSON_MEM_WIN_MASK_H 	LOONGSON_REG(LOONGSON_REGBASE + 0x4c)
+
+/* PCI_Hit*_Sel_* */
+
+#define LOONGSON_PCI_HIT0_SEL_L		LOONGSON_REG(LOONGSON_REGBASE + 0x50)
+#define LOONGSON_PCI_HIT0_SEL_H		LOONGSON_REG(LOONGSON_REGBASE + 0x54)
+#define LOONGSON_PCI_HIT1_SEL_L		LOONGSON_REG(LOONGSON_REGBASE + 0x58)
+#define LOONGSON_PCI_HIT1_SEL_H		LOONGSON_REG(LOONGSON_REGBASE + 0x5c)
+#define LOONGSON_PCI_HIT2_SEL_L		LOONGSON_REG(LOONGSON_REGBASE + 0x60)
+#define LOONGSON_PCI_HIT2_SEL_H		LOONGSON_REG(LOONGSON_REGBASE + 0x64)
+
+/* PXArb Config & Status */
+
+#define LOONGSON_PXARB_CFG		LOONGSON_REG(LOONGSON_REGBASE + 0x68)
+#define LOONGSON_PXARB_STATUS		LOONGSON_REG(LOONGSON_REGBASE + 0x6c)
+
+/* Chip Config */
+#define LOONGSON_CHIPCFG0		LOONGSON_REG(LOONGSON_REGBASE + 0x80)
+
+/* pcimap */
+
+#define LOONGSON_PCIMAP_PCIMAP_LO0	0x0000003f
+#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT	0
+#define LOONGSON_PCIMAP_PCIMAP_LO1	0x00000fc0
+#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT	6
+#define LOONGSON_PCIMAP_PCIMAP_LO2	0x0003f000
+#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT	12
+#define LOONGSON_PCIMAP_PCIMAP_2	0x00040000
+#define LOONGSON_PCIMAP_WIN(WIN, ADDR)	\
+	((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+
+/*
+ * address windows configuration module
+ *
+ * loongson2e do not have this module
+ */
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+
+/* address window config module base address */
+#define LOONGSON_ADDRWINCFG_BASE		0x3ff00000ul
+#define LOONGSON_ADDRWINCFG_SIZE		0x180
+
+extern unsigned long _loongson_addrwincfg_base;
+#define LOONGSON_ADDRWINCFG(offset) \
+	(*(u64 *)(_loongson_addrwincfg_base + (offset)))
+
+#define CPU_WIN0_BASE	LOONGSON_ADDRWINCFG(0x00)
+#define CPU_WIN1_BASE	LOONGSON_ADDRWINCFG(0x08)
+#define CPU_WIN2_BASE	LOONGSON_ADDRWINCFG(0x10)
+#define CPU_WIN3_BASE	LOONGSON_ADDRWINCFG(0x18)
+
+#define CPU_WIN0_MASK	LOONGSON_ADDRWINCFG(0x20)
+#define CPU_WIN1_MASK	LOONGSON_ADDRWINCFG(0x28)
+#define CPU_WIN2_MASK	LOONGSON_ADDRWINCFG(0x30)
+#define CPU_WIN3_MASK	LOONGSON_ADDRWINCFG(0x38)
+
+#define CPU_WIN0_MMAP	LOONGSON_ADDRWINCFG(0x40)
+#define CPU_WIN1_MMAP	LOONGSON_ADDRWINCFG(0x48)
+#define CPU_WIN2_MMAP	LOONGSON_ADDRWINCFG(0x50)
+#define CPU_WIN3_MMAP	LOONGSON_ADDRWINCFG(0x58)
+
+#define PCIDMA_WIN0_BASE	LOONGSON_ADDRWINCFG(0x60)
+#define PCIDMA_WIN1_BASE	LOONGSON_ADDRWINCFG(0x68)
+#define PCIDMA_WIN2_BASE	LOONGSON_ADDRWINCFG(0x70)
+#define PCIDMA_WIN3_BASE	LOONGSON_ADDRWINCFG(0x78)
+
+#define PCIDMA_WIN0_MASK	LOONGSON_ADDRWINCFG(0x80)
+#define PCIDMA_WIN1_MASK	LOONGSON_ADDRWINCFG(0x88)
+#define PCIDMA_WIN2_MASK	LOONGSON_ADDRWINCFG(0x90)
+#define PCIDMA_WIN3_MASK	LOONGSON_ADDRWINCFG(0x98)
+
+#define PCIDMA_WIN0_MMAP	LOONGSON_ADDRWINCFG(0xa0)
+#define PCIDMA_WIN1_MMAP	LOONGSON_ADDRWINCFG(0xa8)
+#define PCIDMA_WIN2_MMAP	LOONGSON_ADDRWINCFG(0xb0)
+#define PCIDMA_WIN3_MMAP	LOONGSON_ADDRWINCFG(0xb8)
+
+#define ADDRWIN_WIN0	0
+#define ADDRWIN_WIN1	1
+#define ADDRWIN_WIN2	2
+#define ADDRWIN_WIN3	3
+
+#define ADDRWIN_MAP_DST_DDR	0
+#define ADDRWIN_MAP_DST_PCI	1
+#define ADDRWIN_MAP_DST_LIO	1
+
+/*
+ * s: CPU, PCIDMA
+ * d: DDR, PCI, LIO
+ * win: 0, 1, 2, 3
+ * src: map source
+ * dst: map destination
+ * size: ~mask + 1
+ */
+#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
+	s##_WIN##w##_BASE = (src); \
+	s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
+	s##_WIN##w##_MASK = ~(size-1); \
+} while (0)
+
+#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \
+	LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size)
+#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \
+	LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size)
+#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \
+	LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size)
+
+#endif	/* ! CONFIG_CPU_LOONGSON2F && CONFIG_64BIT */
+
+#endif	/* __LOONGSON_H */
+
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/machine.h linux-2.6.30/arch/mips/include/asm/mach-loongson/machine.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/machine.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/machine.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,76 @@
+/*
+ * board-specific header file
+ *
+ * Copyright (c) 2009 Wu Zhangjin <wuzj@lemote.com>
+ *
+ * Copyright (C) 2009       Zhang Le
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MACHINE_H
+#define __MACHINE_H
+
+#ifdef CONFIG_LEMOTE_FULOONG2E
+
+#define MACHTYPE	MACH_LEMOTE_FL2E
+
+#define LOONGSON_UART_BASE		(LOONGSON_PCIIO_BASE + 0x3f8)
+#define	LOONGSON_UART_BAUD		1843200
+#define	LOONGSON_UART_IOTYPE		UPIO_PORT
+
+#define LOONGSON_NORTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 2)
+#define LOONGSON_UART_IRQ		(MIPS_CPU_IRQ_BASE + 4)
+#define LOONGSON_SOUTH_BRIDGE_IRQ 	(MIPS_CPU_IRQ_BASE + 5)
+#define LOONGSON_TIMER_IRQ        	(MIPS_CPU_IRQ_BASE + 7)
+#define LOONGSON_DMATIMEOUT_IRQ		(LOONGSON_IRQ_BASE + 10)
+
+#elif defined(CONFIG_LEMOTE_FULOONG2F)
+
+#define MACHTYPE	MACH_LEMOTE_FL2F
+
+#define LOONGSON_UART_BASE		(LOONGSON_PCIIO_BASE + 0x2f8)
+#define LOONGSON_UART_BAUD		1843200
+#define LOONGSON_UART_IOTYPE		UPIO_PORT
+
+#else /* CONFIG_CPU_YEELOONG2F */
+
+#define MACHTYPE	MACH_LEMOTE_YL2F89
+
+/* yeeloong use the CPU serial port of Loongson2F */
+#define LOONGSON_UART_BASE		(LOONGSON_LIO1_BASE + 0x3f8)
+#define	LOONGSON_UART_BAUD		3686400
+#define LOONGSON_UART_IOTYPE		UPIO_MEM
+
+#endif	/* !CONFIG_LEMOTE_FULOONG2E */
+
+/* fuloong2f and yeeloong2f have the same IRQ control interface */
+#if defined(CONFIG_LEMOTE_FULOONG2F) || defined(CONFIG_LEMOTE_YEELOONG2F)
+
+#define LOONGSON_TIMER_IRQ	(MIPS_CPU_IRQ_BASE + 7)	/* cpu timer */
+#define LOONGSON_NORTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 6)	/* bonito */
+#define LOONGSON_UART_IRQ	(MIPS_CPU_IRQ_BASE + 3)	/* cpu serial port */
+#define LOONGSON_SOUTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 2)	/* i8259 */
+
+#define LOONGSON_INT_BIT_GPIO1		(1 << 1)
+#define LOONGSON_INT_BIT_GPIO2		(1 << 2)
+#define LOONGSON_INT_BIT_GPIO3		(1 << 3)
+#define LOONGSON_INT_BIT_PCI_INTA	(1 << 4)
+#define LOONGSON_INT_BIT_PCI_INTB	(1 << 5)
+#define LOONGSON_INT_BIT_PCI_INTC	(1 << 6)
+#define LOONGSON_INT_BIT_PCI_INTD	(1 << 7)
+#define LOONGSON_INT_BIT_PCI_PERR	(1 << 8)
+#define LOONGSON_INT_BIT_PCI_SERR	(1 << 9)
+#define LOONGSON_INT_BIT_DDR		(1 << 10)
+#define LOONGSON_INT_BIT_INT0		(1 << 11)
+#define LOONGSON_INT_BIT_INT1		(1 << 12)
+#define LOONGSON_INT_BIT_INT2		(1 << 13)
+#define LOONGSON_INT_BIT_INT3		(1 << 14)
+
+#endif
+
+#endif				/* ! __MACHINE_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/mc146818rtc.h linux-2.6.30/arch/mips/include/asm/mach-loongson/mc146818rtc.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/mc146818rtc.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/mc146818rtc.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_LOONGSON_MC146818RTC_H
+#define __ASM_MACH_LOONGSON_MC146818RTC_H
+
+#include <linux/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_LOONGSON_MC146818RTC_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/mem.h linux-2.6.30/arch/mips/include/asm/mach-loongson/mem.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/mem.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/mem.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,31 @@
+#ifndef __MEM_H
+#define __MEM_H
+
+/*
+ * high memory space
+ *
+ * in loongson2e, starts from 512M
+ * in loongson2f, starts from 2G + 256M
+ */
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_HIGHMEM_START	0x20000000
+#else
+#define LOONGSON_HIGHMEM_START	0x90000000
+#endif
+
+/*
+ * the peripheral registers(MMIO):
+ *
+ * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000.
+ * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000.
+ */
+
+#define LOONGSON_MMIO_MEM_START 0x10000000
+
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_MMIO_MEM_END	0x20000000
+#else
+#define LOONGSON_MMIO_MEM_END	0x80000000
+#endif
+
+#endif	/* !__MEM_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/pci.h linux-2.6.30/arch/mips/include/asm/mach-loongson/pci.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/pci.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/pci.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
+ * Copyright (c) 2009 Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be
+ * useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ * 02139, USA.
+ */
+
+#ifndef _LOONGSON_PCI_H_
+#define _LOONGSON_PCI_H_
+
+extern struct pci_ops loongson_pci_ops;
+
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START	0x00004000UL
+
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+
+/*
+ * we use address window2 to map cpu address space to pci space
+ * window2: cpu [1G, 2G] -> pci [1G, 2G]
+ * why not use window 0 & 1? because they are used by cpu when booting.
+ * window0: cpu [0, 256M] -> ddr [0, 256M]
+ * window1: cpu [256M, 512M] -> pci [256M, 512M]
+ */
+
+/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
+#define LOONGSON_CPU_MEM_SRC	0x40000000ul		/* 1G */
+#define LOONGSON_PCI_MEM_DST	LOONGSON_CPU_MEM_SRC
+
+#define LOONGSON_PCI_MEM_START	LOONGSON_PCI_MEM_DST
+#define LOONGSON_PCI_MEM_END	(0x80000000ul-1)	/* 2G */
+
+#define MMAP_CPUTOPCI_SIZE	(LOONGSON_PCI_MEM_END - \
+					LOONGSON_PCI_MEM_START + 1)
+
+#else	/* loongson2f/32bit & loongson2e */
+
+#define LOONGSON_PCI_MEM_START	0x14000000UL
+#define LOONGSON_PCI_MEM_END	0x1fffffffUL
+
+#endif	/* !(defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT))*/
+
+
+#endif /* !_LOONGSON_PCI_H_ */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/war.h linux-2.6.30/arch/mips/include/asm/mach-loongson/war.h
--- linux-2.6.30.orig/arch/mips/include/asm/mach-loongson/war.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/include/asm/mach-loongson/war.h	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_LOONGSON_WAR_H
+#define __ASM_MIPS_MACH_LOONGSON_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_LOONGSON_WAR_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/mips-boards/bonito64.h linux-2.6.30/arch/mips/include/asm/mips-boards/bonito64.h
--- linux-2.6.30.orig/arch/mips/include/asm/mips-boards/bonito64.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/mips-boards/bonito64.h	2009-06-14 20:25:19.000000000 +0200
@@ -26,11 +26,6 @@
 /* offsets from base register */
 #define BONITO(x)	(x)
 
-#elif defined(CONFIG_LEMOTE_FULONG)
-
-#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x)))
-#define BONITO_IRQ_BASE   32
-
 #else
 
 /*
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/page.h linux-2.6.30/arch/mips/include/asm/page.h
--- linux-2.6.30.orig/arch/mips/include/asm/page.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/page.h	2009-06-14 20:25:19.000000000 +0200
@@ -179,8 +179,9 @@
 
 #endif
 
-#define virt_to_page(kaddr)	pfn_to_page(PFN_DOWN(virt_to_phys(kaddr)))
-#define virt_addr_valid(kaddr)	pfn_valid(PFN_DOWN(virt_to_phys(kaddr)))
+#define virt_to_page(kaddr) \
+	pfn_to_page(PFN_DOWN(virt_to_phys((void *)kaddr)))
+#define virt_addr_valid(kaddr)	pfn_valid(PFN_DOWN(virt_to_phys((void *)kaddr)))
 
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/pci.h linux-2.6.30/arch/mips/include/asm/pci.h
--- linux-2.6.30.orig/arch/mips/include/asm/pci.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/pci.h	2009-06-14 20:25:19.000000000 +0200
@@ -56,7 +56,7 @@
 /*
  * board supplied pci irq fixup routine
  */
-extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+extern int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
 
 /* Can be used to override the logic in pci_scan_bus for skipping
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/pgtable.h linux-2.6.30/arch/mips/include/asm/pgtable.h
--- linux-2.6.30.orig/arch/mips/include/asm/pgtable.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/pgtable.h	2009-06-14 20:25:19.000000000 +0200
@@ -370,6 +370,19 @@
 #include <asm-generic/pgtable.h>
 
 /*
+ * uncache accelerate for video memory access
+ */
+#ifdef CONFIG_LOONGSON2F
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+struct file;
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+		unsigned long size, pgprot_t vma_prot);
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+		unsigned long size, pgprot_t *vma_prot);
+#endif
+
+/*
  * We provide our own get_unmapped area to cope with the virtual aliasing
  * constraints placed on us by the cache architecture.
  */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/stackframe.h linux-2.6.30/arch/mips/include/asm/stackframe.h
--- linux-2.6.30.orig/arch/mips/include/asm/stackframe.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/stackframe.h	2009-06-14 20:25:19.000000000 +0200
@@ -117,6 +117,20 @@
 		.endm
 #else
 		.macro	get_saved_sp	/* Uniprocessor variation */
+#ifdef CONFIG_CPU_LOONGSON2
+		move k0, ra
+		jal	2008f
+		nop
+2008 :		jal	2008f
+		nop
+2008 :		jal	2008f
+		nop
+2008 :		jal	2008f
+		nop
+2008 :		move	ra, k0
+		li	k0, 3
+		mtc0	k0, $22
+#endif
 #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
 		lui	k1, %hi(kernelsp)
 #else
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/suspend.h linux-2.6.30/arch/mips/include/asm/suspend.h
--- linux-2.6.30.orig/arch/mips/include/asm/suspend.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/suspend.h	2009-06-14 20:25:19.000000000 +0200
@@ -1,6 +1,9 @@
 #ifndef __ASM_SUSPEND_H
 #define __ASM_SUSPEND_H
 
-/* Somewhen...  Maybe :-)  */
+static inline int arch_prepare_suspend(void) { return 0; }
+
+/* References to section boundaries */
+extern const void __nosave_begin, __nosave_end;
 
 #endif /* __ASM_SUSPEND_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/txx9/generic.h linux-2.6.30/arch/mips/include/asm/txx9/generic.h
--- linux-2.6.30.orig/arch/mips/include/asm/txx9/generic.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/txx9/generic.h	2009-06-14 20:25:19.000000000 +0200
@@ -37,7 +37,7 @@
 	void (*arch_init)(void);
 	void (*device_init)(void);
 #ifdef CONFIG_PCI
-	int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
+	int (*pci_map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
 #endif
 };
 extern struct txx9_board_vec *txx9_board_vec;
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/txx9/jmr3927.h linux-2.6.30/arch/mips/include/asm/txx9/jmr3927.h
--- linux-2.6.30.orig/arch/mips/include/asm/txx9/jmr3927.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/txx9/jmr3927.h	2009-06-14 20:25:19.000000000 +0200
@@ -175,6 +175,6 @@
 void jmr3927_prom_init(void);
 void jmr3927_irq_setup(void);
 struct pci_dev;
-int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+int jmr3927_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
 #endif /* __ASM_TXX9_JMR3927_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/txx9/rbtx4927.h linux-2.6.30/arch/mips/include/asm/txx9/rbtx4927.h
--- linux-2.6.30.orig/arch/mips/include/asm/txx9/rbtx4927.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/txx9/rbtx4927.h	2009-06-14 20:25:19.000000000 +0200
@@ -87,6 +87,6 @@
 void rbtx4927_prom_init(void);
 void rbtx4927_irq_setup(void);
 struct pci_dev;
-int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+int rbtx4927_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
 #endif /* __ASM_TXX9_RBTX4927_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/txx9/rbtx4938.h linux-2.6.30/arch/mips/include/asm/txx9/rbtx4938.h
--- linux-2.6.30.orig/arch/mips/include/asm/txx9/rbtx4938.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/txx9/rbtx4938.h	2009-06-14 20:25:19.000000000 +0200
@@ -140,6 +140,6 @@
 void rbtx4938_prom_init(void);
 void rbtx4938_irq_setup(void);
 struct pci_dev;
-int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+int rbtx4938_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
 #endif /* __ASM_TXX9_RBTX4938_H */
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/txx9/tx4938.h linux-2.6.30/arch/mips/include/asm/txx9/tx4938.h
--- linux-2.6.30.orig/arch/mips/include/asm/txx9/tx4938.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/txx9/tx4938.h	2009-06-14 20:25:19.000000000 +0200
@@ -287,7 +287,7 @@
 void tx4938_report_pci1clk(void);
 int tx4938_pciclk66_setup(void);
 struct pci_dev;
-int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+int tx4938_pcic1_map_irq(struct pci_dev *dev, u8 slot);
 void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 void tx4938_mtd_init(int ch);
diff -Nur linux-2.6.30.orig/arch/mips/include/asm/txx9/tx4939.h linux-2.6.30/arch/mips/include/asm/txx9/tx4939.h
--- linux-2.6.30.orig/arch/mips/include/asm/txx9/tx4939.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/include/asm/txx9/tx4939.h	2009-06-14 20:25:19.000000000 +0200
@@ -534,8 +534,8 @@
 int tx4939_report_pciclk(void);
 void tx4939_report_pci1clk(void);
 struct pci_dev;
-int tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
-int tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+int tx4939_pcic1_map_irq(struct pci_dev *dev, u8 slot);
+int tx4939_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
 void tx4939_setup_pcierr_irq(void);
 void tx4939_irq_init(void);
 int tx4939_irq(void);
diff -Nur linux-2.6.30.orig/arch/mips/Kconfig linux-2.6.30/arch/mips/Kconfig
--- linux-2.6.30.orig/arch/mips/Kconfig	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/Kconfig	2009-06-14 20:25:19.000000000 +0200
@@ -6,7 +6,7 @@
 	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
-	select RTC_LIB
+	select RTC_LIB if !MACH_LOONGSON
 
 mainmenu "Linux/MIPS Kernel Configuration"
 
@@ -154,30 +154,15 @@
 	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config LEMOTE_FULONG
-	bool "Lemote Fulong mini-PC"
-	select ARCH_SPARSEMEM_ENABLE
-	select CEVT_R4K
-	select CSRC_R4K
-	select SYS_HAS_CPU_LOONGSON2
-	select DMA_NONCOHERENT
-	select BOOT_ELF32
-	select BOARD_SCACHE
-	select HAVE_STD_PC_SERIAL_PORT
-	select HW_HAS_PCI
-	select I8259
-	select ISA
-	select IRQ_CPU
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_HAS_EARLY_PRINTK
-	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select CPU_HAS_WB
+config MACH_LOONGSON
+	bool "Loongson family of machines"
 	help
-	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
-	  an FPGA northbridge
+	  This enables the support of Loongson family of machines.
+
+	  Loongson is a family of general-purpose MIPS-compatible CPUs.
+	  developed at Institute of Computing Technology (ICT),
+	  Chinese Academy of Sciences (CAS) in the People's Republic
+	  of China. The chief architect is Professor Weiwu Hu.
 
 config MIPS_MALTA
 	bool "MIPS Malta board"
@@ -643,6 +628,7 @@
 source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/cavium-octeon/Kconfig"
+source "arch/mips/loongson/Kconfig"
 
 endmenu
 
@@ -1005,16 +991,29 @@
 	prompt "CPU type"
 	default CPU_R4X00
 
-config CPU_LOONGSON2
-	bool "Loongson 2"
-	depends on SYS_HAS_CPU_LOONGSON2
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_SUPPORTS_HIGHMEM
+config CPU_LOONGSON2E
+	bool "Loongson 2E"
+	depends on SYS_HAS_CPU_LOONGSON2E
+	select CPU_LOONGSON2
 	help
 	  The Loongson 2E processor implements the MIPS III instruction set
 	  with many extensions.
 
+	  It has an internal FPGA northbridge, which is compatiable to
+	  bonito64.
+
+config CPU_LOONGSON2F
+	bool "Loongson 2F"
+	depends on SYS_HAS_CPU_LOONGSON2F
+	select CPU_LOONGSON2
+	help
+	  The Loongson 2F processor implements the MIPS III instruction set
+	  with many extensions.
+
+	  Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
+	  have a similar programming interface with FPGA northbridge used in
+	  Loongson2E.
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1253,7 +1252,16 @@
 
 endchoice
 
-config SYS_HAS_CPU_LOONGSON2
+config CPU_LOONGSON2
+	bool
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+
+config SYS_HAS_CPU_LOONGSON2E
+	bool
+
+config SYS_HAS_CPU_LOONGSON2F
 	bool
 
 config SYS_HAS_CPU_MIPS32_R1
@@ -2121,6 +2129,9 @@
 
 menu "Power management options"
 
+config ARCH_HIBERNATION_POSSIBLE
+	def_bool y
+
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 	depends on !SMP
@@ -2129,6 +2140,23 @@
 
 endmenu
 
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+config LOONGSON2F_CPU_FREQ
+	bool "Loongson-2F CPU Frequency driver"
+	depends on CPU_LOONGSON2F && CPU_FREQ && (CS5536_MFGPT || I8253)
+	select CPU_FREQ_TABLE
+	help
+	  This adds the cpufreq driver for Loongson-2F.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If unsure, say N.
+
+endmenu
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"
diff -Nur linux-2.6.30.orig/arch/mips/kernel/asm-offsets.c linux-2.6.30/arch/mips/kernel/asm-offsets.c
--- linux-2.6.30.orig/arch/mips/kernel/asm-offsets.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/kernel/asm-offsets.c	2009-06-14 20:25:19.000000000 +0200
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/kbuild.h>
+#include <linux/suspend.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 
@@ -326,3 +327,15 @@
 	BLANK();
 }
 #endif
+
+#ifdef CONFIG_HIBERNATION
+void output_pbe_defines(void)
+{
+	COMMENT(" Linux struct pbe offsets. ");
+	OFFSET(PBE_ADDRESS, pbe, address);
+	OFFSET(PBE_ORIG_ADDRESS, pbe, orig_address);
+	OFFSET(PBE_NEXT, pbe, next);
+	DEFINE(PBE_SIZE, sizeof(struct pbe));
+	BLANK();
+}
+#endif
diff -Nur linux-2.6.30.orig/arch/mips/kernel/i8259.c linux-2.6.30/arch/mips/kernel/i8259.c
--- linux-2.6.30.orig/arch/mips/kernel/i8259.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/kernel/i8259.c	2009-06-14 20:25:19.000000000 +0200
@@ -177,10 +177,12 @@
 		outb(cached_slave_mask, PIC_SLAVE_IMR);
 		outb(0x60+(irq&7), PIC_SLAVE_CMD);/* 'Specific EOI' to slave */
 		outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */
+		inb(PIC_MASTER_CMD);	/* flush posted write */
 	} else {
 		inb(PIC_MASTER_IMR);	/* DUMMY - (do we need this?) */
 		outb(cached_master_mask, PIC_MASTER_IMR);
 		outb(0x60+irq, PIC_MASTER_CMD);	/* 'Specific EOI to master */
+		inb(PIC_MASTER_CMD);	/* flush posted write */
 	}
 	smtc_im_ack_irq(irq);
 	spin_unlock_irqrestore(&i8259A_lock, flags);
diff -Nur linux-2.6.30.orig/arch/mips/kernel/loongson2f_freq.c linux-2.6.30/arch/mips/kernel/loongson2f_freq.c
--- linux-2.6.30.orig/arch/mips/kernel/loongson2f_freq.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/kernel/loongson2f_freq.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,216 @@
+/*
+ * arch/mips/kernel/cpufreq.c
+ *
+ * cpufreq driver for the loongson-2f processors.
+ *
+ * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <linux/sched.h>	/* set_cpus_allowed() */
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+#include <loongson.h>
+#include <clock.h>
+
+static uint nowait;
+
+static struct clk *cpuclk;
+
+static void (*saved_cpu_wait) (void);
+
+static int loongson2f_cpu_freq_notifier(struct notifier_block *nb,
+					unsigned long val, void *data);
+
+static struct notifier_block loongson2f_cpufreq_notifier_block = {
+	.notifier_call = loongson2f_cpu_freq_notifier
+};
+
+static int loongson2f_cpu_freq_notifier(struct notifier_block *nb,
+					unsigned long val, void *data)
+{
+	if (val == CPUFREQ_POSTCHANGE)
+		current_cpu_data.udelay_val = loops_per_jiffy;
+
+	return 0;
+}
+
+static unsigned int loongson2f_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(cpuclk);
+}
+
+/*
+ * Here we notify other drivers of the proposed change and the final change.
+ */
+static int loongson2f_cpufreq_target(struct cpufreq_policy *policy,
+				     unsigned int target_freq,
+				     unsigned int relation)
+{
+	unsigned int cpu = policy->cpu;
+	unsigned int newstate = 0;
+	cpumask_t cpus_allowed;
+	struct cpufreq_freqs freqs;
+	long freq;
+
+	if (!cpu_online(cpu))
+		return -ENODEV;
+
+	cpus_allowed = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+#ifdef CONFIG_SMP
+	BUG_ON(smp_processor_id() != cpu);
+#endif
+
+	if (cpufreq_frequency_table_target
+	    (policy, &loongson2f_clockmod_table[0], target_freq, relation,
+	     &newstate))
+		return -EINVAL;
+
+	freq =
+	    cpu_clock_freq / 1000 * loongson2f_clockmod_table[newstate].index /
+	    8;
+	if (freq < policy->min || freq > policy->max)
+		return -EINVAL;
+
+	pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
+
+	freqs.cpu = cpu;
+	freqs.old = loongson2f_cpufreq_get(cpu);
+	freqs.new = freq;
+	freqs.flags = 0;
+
+	if (freqs.new == freqs.old)
+		return 0;
+
+	/* notifiers */
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	set_cpus_allowed(current, cpus_allowed);
+
+	/* setting the cpu frequency */
+	clk_set_rate(cpuclk, freq);
+
+	/* notifiers */
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	pr_debug("cpufreq: set frequency %lu kHz\n", freq);
+
+	return 0;
+}
+
+static int loongson2f_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	int i;
+	int result;
+
+	if (!cpu_online(policy->cpu))
+		return -ENODEV;
+
+	cpuclk = clk_get(NULL, "cpu_clk");
+	if (IS_ERR(cpuclk)) {
+		printk(KERN_ERR "cpufreq: couldn't get CPU clk\n");
+		return PTR_ERR(cpuclk);
+	}
+
+	cpuclk->rate = cpu_clock_freq / 1000;
+	if (!cpuclk->rate)
+		return -EINVAL;
+
+	/* clock table init */
+	for (i = 2;
+	     (loongson2f_clockmod_table[i].frequency != CPUFREQ_TABLE_END);
+	     i++) {
+		loongson2f_clockmod_table[i].frequency = (cpuclk->rate * i) / 8;
+	}
+
+	policy->cur = loongson2f_cpufreq_get(policy->cpu);
+
+	cpufreq_frequency_table_get_attr(&loongson2f_clockmod_table[0],
+					 policy->cpu);
+
+	result =
+	    cpufreq_frequency_table_cpuinfo(policy,
+					    &loongson2f_clockmod_table[0]);
+	if (result)
+		return result;
+
+	return 0;
+}
+
+static int loongson2f_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy,
+					      &loongson2f_clockmod_table[0]);
+}
+
+static int loongson2f_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	clk_put(cpuclk);
+	return 0;
+}
+
+static struct freq_attr *loongson2f_table_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver loongson2f_cpufreq_driver = {
+	.owner = THIS_MODULE,
+	.name = "loongson2f",
+	.init = loongson2f_cpufreq_cpu_init,
+	.verify = loongson2f_cpufreq_verify,
+	.target = loongson2f_cpufreq_target,
+	.get = loongson2f_cpufreq_get,
+	.exit = loongson2f_cpufreq_exit,
+	.attr = loongson2f_table_attr,
+};
+
+static int __init loongson2f_cpufreq_module_init(void)
+{
+	int result;
+
+	printk(KERN_INFO "cpufreq: Loongson-2F CPU frequency driver.\n");
+	result = cpufreq_register_driver(&loongson2f_cpufreq_driver);
+
+	if (!result && !nowait) {
+		saved_cpu_wait = cpu_wait;
+		cpu_wait = loongson2f_cpu_wait;
+	}
+
+	cpufreq_register_notifier(&loongson2f_cpufreq_notifier_block,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+	return result;
+}
+
+static void __exit loongson2f_cpufreq_module_exit(void)
+{
+	if (!nowait && saved_cpu_wait)
+		cpu_wait = saved_cpu_wait;
+	cpufreq_unregister_driver(&loongson2f_cpufreq_driver);
+	cpufreq_unregister_notifier(&loongson2f_cpufreq_notifier_block,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+module_init(loongson2f_cpufreq_module_init);
+module_exit(loongson2f_cpufreq_module_exit);
+
+module_param(nowait, uint, 0644);
+MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait");
+
+MODULE_AUTHOR("Yanhua <yanh@lemote.com>");
+MODULE_DESCRIPTION("cpufreq driver for Loongson2F");
+MODULE_LICENSE("GPL");
diff -Nur linux-2.6.30.orig/arch/mips/kernel/Makefile linux-2.6.30/arch/mips/kernel/Makefile
--- linux-2.6.30.orig/arch/mips/kernel/Makefile	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/kernel/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -73,6 +73,7 @@
 obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
+obj-$(CONFIG_LOONGSON2F_CPU_FREQ) += loongson2f_freq.o
 
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PROC_FS)		+= proc.o
diff -Nur linux-2.6.30.orig/arch/mips/kernel/smtc.c linux-2.6.30/arch/mips/kernel/smtc.c
--- linux-2.6.30.orig/arch/mips/kernel/smtc.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/kernel/smtc.c	2009-06-14 20:25:19.000000000 +0200
@@ -924,6 +924,7 @@
 	int irq = MIPS_CPU_IRQ_BASE + 1;
 
 	smtc_ipi_nq(&freeIPIq, pipi);
+
 	switch (type_copy) {
 	case SMTC_CLOCK_TICK:
 		irq_enter();
diff -Nur linux-2.6.30.orig/arch/mips/lemote/lm2e/bonito-irq.c linux-2.6.30/arch/mips/lemote/lm2e/bonito-irq.c
--- linux-2.6.30.orig/arch/mips/lemote/lm2e/bonito-irq.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/lemote/lm2e/bonito-irq.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,74 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/mips-boards/bonito64.h>
-
-
-static inline void bonito_irq_enable(unsigned int irq)
-{
-	BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE));
-	mmiowb();
-}
-
-static inline void bonito_irq_disable(unsigned int irq)
-{
-	BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE));
-	mmiowb();
-}
-
-static struct irq_chip bonito_irq_type = {
-	.name	= "bonito_irq",
-	.ack	= bonito_irq_disable,
-	.mask	= bonito_irq_disable,
-	.mask_ack = bonito_irq_disable,
-	.unmask	= bonito_irq_enable,
-};
-
-static struct irqaction dma_timeout_irqaction = {
-	.handler	= no_action,
-	.name		= "dma_timeout",
-};
-
-void bonito_irq_init(void)
-{
-	u32 i;
-
-	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) {
-		set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
-	}
-
-	setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
-}
diff -Nur linux-2.6.30.orig/arch/mips/lemote/lm2e/dbg_io.c linux-2.6.30/arch/mips/lemote/lm2e/dbg_io.c
--- linux-2.6.30.orig/arch/mips/lemote/lm2e/dbg_io.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/lemote/lm2e/dbg_io.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,146 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/types.h>
-
-#include <asm/serial.h>
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-#ifdef CONFIG_64BIT
-#define         BASE                    (0xffffffffbfd003f8)
-#else
-#define         BASE                    (0xbfd003f8)
-#endif
-
-#define         MAX_BAUD                BASE_BAUD
-/* === END OF CONFIG === */
-
-#define         REG_OFFSET              1
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)	readb((char *)BASE + (y))
-#define         UART16550_WRITE(y, z)	writeb(z, (char *)BASE + (y))
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	u32 divisor;
-
-	/* disable interrupts */
-	UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-	/* set up buad rate */
-	/* set DIAB bit */
-	UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-	/* set divisor */
-	divisor = MAX_BAUD / baud;
-	UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-	UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-	/* clear DIAB bit */
-	UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-
-	/* set data format */
-	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0) ;
-	return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		/*
-		   debugInit(UART16550_BAUD_115200,
-		   UART16550_DATA_8BIT,
-		   UART16550_PARITY_NONE, UART16550_STOP_1BIT); */
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0) ;
-	UART16550_WRITE(OFS_SEND_BUFFER, byte);
-	return 1;
-}
diff -Nur linux-2.6.30.orig/arch/mips/lemote/lm2e/irq.c linux-2.6.30/arch/mips/lemote/lm2e/irq.c
--- linux-2.6.30.orig/arch/mips/lemote/lm2e/irq.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/lemote/lm2e/irq.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/i8259.h>
-#include <asm/mipsregs.h>
-#include <asm/mips-boards/bonito64.h>
-
-
-/*
- * the first level int-handler will jump here if it is a bonito irq
- */
-static void bonito_irqdispatch(void)
-{
-	u32 int_status;
-	int i;
-
-	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
-	int_status = BONITO_INTISR;
-	if (int_status & (1 << 10)) {
-		while (int_status & (1 << 10)) {
-			udelay(1);
-			int_status = BONITO_INTISR;
-		}
-	}
-
-	/* Get pending sources, masked by current enables */
-	int_status = BONITO_INTISR & BONITO_INTEN;
-
-	if (int_status != 0) {
-		i = __ffs(int_status);
-		int_status &= ~(1 << i);
-		do_IRQ(BONITO_IRQ_BASE + i);
-	}
-}
-
-static void i8259_irqdispatch(void)
-{
-	int irq;
-
-	irq = i8259_irq();
-	if (irq >= 0) {
-		do_IRQ(irq);
-	} else {
-		spurious_interrupt();
-	}
-
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
-	if (pending & CAUSEF_IP7) {
-		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
-	} else if (pending & CAUSEF_IP5) {
-		i8259_irqdispatch();
-	} else if (pending & CAUSEF_IP2) {
-		bonito_irqdispatch();
-	} else {
-		spurious_interrupt();
-	}
-}
-
-static struct irqaction cascade_irqaction = {
-	.handler = no_action,
-	.name = "cascade",
-};
-
-void __init arch_init_irq(void)
-{
-	extern void bonito_irq_init(void);
-
-	/*
-	 * Clear all of the interrupts while we change the able around a bit.
-	 * int-handler is not on bootstrap
-	 */
-	clear_c0_status(ST0_IM | ST0_BEV);
-	local_irq_disable();
-
-	/* most bonito irq should be level triggered */
-	BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR |
-		BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
-	BONITO_INTSTEER = 0;
-
-	/*
-	 * Mask out all interrupt by writing "1" to all bit position in
-	 * the interrupt reset reg.
-	 */
-	BONITO_INTENCLR = ~0;
-
-	/* init all controller
-	 *   0-15         ------> i8259 interrupt
-	 *   16-23        ------> mips cpu interrupt
-	 *   32-63        ------> bonito irq
-	 */
-
-	/* Sets the first-level interrupt dispatcher. */
-	mips_cpu_irq_init();
-	init_i8259_irqs();
-	bonito_irq_init();
-
-	/*
-	printk("GPIODATA=%x, GPIOIE=%x\n", BONITO_GPIODATA, BONITO_GPIOIE);
-	printk("INTEN=%x, INTSET=%x, INTCLR=%x, INTISR=%x\n",
-			BONITO_INTEN, BONITO_INTENSET,
-			BONITO_INTENCLR, BONITO_INTISR);
-	*/
-
-	/* bonito irq at IP2 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
-	/* 8259 irq at IP5 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
-
-}
diff -Nur linux-2.6.30.orig/arch/mips/lemote/lm2e/Makefile linux-2.6.30/arch/mips/lemote/lm2e/Makefile
--- linux-2.6.30.orig/arch/mips/lemote/lm2e/Makefile	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/lemote/lm2e/Makefile	1970-01-01 01:00:00.000000000 +0100
@@ -1,7 +0,0 @@
-#
-# Makefile for Lemote Fulong mini-PC board.
-#
-
-obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o dbg_io.o mem.o
-
-EXTRA_CFLAGS += -Werror
diff -Nur linux-2.6.30.orig/arch/mips/lemote/lm2e/mem.c linux-2.6.30/arch/mips/lemote/lm2e/mem.c
--- linux-2.6.30.orig/arch/mips/lemote/lm2e/mem.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/lemote/lm2e/mem.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,23 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/fs.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-
-/* override of arch/mips/mm/cache.c: __uncached_access */
-int __uncached_access(struct file *file, unsigned long addr)
-{
-	if (file->f_flags & O_SYNC)
-		return 1;
-
-	/*
-	 * On the Lemote Loongson 2e system, the peripheral registers
-	 * reside between 0x1000:0000 and 0x2000:0000.
-	 */
-	return addr >= __pa(high_memory) ||
-		((addr >= 0x10000000) && (addr < 0x20000000));
-}
diff -Nur linux-2.6.30.orig/arch/mips/lemote/lm2e/pci.c linux-2.6.30/arch/mips/lemote/lm2e/pci.c
--- linux-2.6.30.orig/arch/mips/lemote/lm2e/pci.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/lemote/lm2e/pci.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,97 +0,0 @@
-/*
- * pci.c
- *
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/mips-boards/bonito64.h>
-#include <asm/mach-lemote/pci.h>
-
-extern struct pci_ops bonito64_pci_ops;
-
-static struct resource loongson2e_pci_mem_resource = {
-	.name   = "LOONGSON2E PCI MEM",
-	.start  = LOONGSON2E_PCI_MEM_START,
-	.end    = LOONGSON2E_PCI_MEM_END,
-	.flags  = IORESOURCE_MEM,
-};
-
-static struct resource loongson2e_pci_io_resource = {
-	.name   = "LOONGSON2E PCI IO MEM",
-	.start  = LOONGSON2E_PCI_IO_START,
-	.end    = IO_SPACE_LIMIT,
-	.flags  = IORESOURCE_IO,
-};
-
-static struct pci_controller  loongson2e_pci_controller = {
-	.pci_ops        = &bonito64_pci_ops,
-	.io_resource    = &loongson2e_pci_io_resource,
-	.mem_resource   = &loongson2e_pci_mem_resource,
-	.mem_offset     = 0x00000000UL,
-	.io_offset      = 0x00000000UL,
-};
-
-static void __init ict_pcimap(void)
-{
-	/*
-	 * local to PCI mapping: [256M,512M] -> [256M,512M]; differ from PMON
-	 *
-	 * CPU address space [256M,448M] is window for accessing pci space
-	 * we set pcimap_lo[0,1,2] to map it to pci space [256M,448M]
-	 * pcimap: bit18,pcimap_2; bit[17-12],lo2;bit[11-6],lo1;bit[5-0],lo0
-	 */
-	/* 1,00 0110 ,0001 01,00 0000 */
-	BONITO_PCIMAP = 0x46140;
-
-	/* 1, 00 0010, 0000,01, 00 0000 */
-	/* BONITO_PCIMAP = 0x42040; */
-
-	/*
-	 * PCI to local mapping: [2G,2G+256M] -> [0,256M]
-	 */
-	BONITO_PCIBASE0 = 0x80000000;
-	BONITO_PCIBASE1 = 0x00800000;
-	BONITO_PCIBASE2 = 0x90000000;
-
-}
-
-static int __init pcibios_init(void)
-{
-	ict_pcimap();
-
-	loongson2e_pci_controller.io_map_base =
-	    (unsigned long) ioremap(LOONGSON2E_IO_PORT_BASE,
-				    loongson2e_pci_io_resource.end -
-				    loongson2e_pci_io_resource.start + 1);
-
-	register_pci_controller(&loongson2e_pci_controller);
-
-	return 0;
-}
-
-arch_initcall(pcibios_init);
diff -Nur linux-2.6.30.orig/arch/mips/lemote/lm2e/prom.c linux-2.6.30/arch/mips/lemote/lm2e/prom.c
--- linux-2.6.30.orig/arch/mips/lemote/lm2e/prom.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/lemote/lm2e/prom.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,97 +0,0 @@
-/*
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2003 ICT CAS
- * Author: Michael Guo <guoyi@ict.ac.cn>
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <asm/bootinfo.h>
-
-extern unsigned long bus_clock;
-extern unsigned long cpu_clock_freq;
-extern unsigned int memsize, highmemsize;
-extern int putDebugChar(unsigned char byte);
-
-static int argc;
-/* pmon passes arguments in 32bit pointers */
-static int *arg;
-static int *env;
-
-const char *get_system_type(void)
-{
-	return "lemote-fulong";
-}
-
-void __init prom_init_cmdline(void)
-{
-	int i;
-	long l;
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-	for (i = 1; i < argc; i++) {
-		l = (long)arg[i];
-		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, ((char *)l));
-		strcat(arcs_cmdline, " ");
-	}
-}
-
-void __init prom_init(void)
-{
-	long l;
-	argc = fw_arg0;
-	arg = (int *)fw_arg1;
-	env = (int *)fw_arg2;
-
-	prom_init_cmdline();
-
-	if ((strstr(arcs_cmdline, "console=")) == NULL)
-		strcat(arcs_cmdline, " console=ttyS0,115200");
-	if ((strstr(arcs_cmdline, "root=")) == NULL)
-		strcat(arcs_cmdline, " root=/dev/hda1");
-
-#define parse_even_earlier(res, option, p)				\
-do {									\
-	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-		res = simple_strtol((char *)p + strlen(option"="),	\
-				    NULL, 10);				\
-} while (0)
-
-	l = (long)*env;
-	while (l != 0) {
-		parse_even_earlier(bus_clock, "busclock", l);
-		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
-		parse_even_earlier(memsize, "memsize", l);
-		parse_even_earlier(highmemsize, "highmemsize", l);
-		env++;
-		l = (long)*env;
-	}
-	if (memsize == 0)
-		memsize = 256;
-
-	pr_info("busclock=%ld, cpuclock=%ld,memsize=%d,highmemsize=%d\n",
-	       bus_clock, cpu_clock_freq, memsize, highmemsize);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void prom_putchar(char c)
-{
-	putDebugChar(c);
-}
diff -Nur linux-2.6.30.orig/arch/mips/lemote/lm2e/reset.c linux-2.6.30/arch/mips/lemote/lm2e/reset.c
--- linux-2.6.30.orig/arch/mips/lemote/lm2e/reset.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/lemote/lm2e/reset.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,41 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- */
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-
-static void loongson2e_restart(char *command)
-{
-#ifdef CONFIG_32BIT
-	*(unsigned long *)0xbfe00104 &= ~(1 << 2);
-	*(unsigned long *)0xbfe00104 |= (1 << 2);
-#else
-	*(unsigned long *)0xffffffffbfe00104 &= ~(1 << 2);
-	*(unsigned long *)0xffffffffbfe00104 |= (1 << 2);
-#endif
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-static void loongson2e_halt(void)
-{
-	while (1) ;
-}
-
-static void loongson2e_power_off(void)
-{
-	loongson2e_halt();
-}
-
-void mips_reboot_setup(void)
-{
-	_machine_restart = loongson2e_restart;
-	_machine_halt = loongson2e_halt;
-	pm_power_off = loongson2e_power_off;
-}
diff -Nur linux-2.6.30.orig/arch/mips/lemote/lm2e/setup.c linux-2.6.30/arch/mips/lemote/lm2e/setup.c
--- linux-2.6.30.orig/arch/mips/lemote/lm2e/setup.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/lemote/lm2e/setup.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,111 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * setup.c - board dependent boot routines
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/bootmem.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mc146818-time.h>
-#include <asm/time.h>
-#include <asm/wbflush.h>
-#include <asm/mach-lemote/pci.h>
-
-#ifdef CONFIG_VT
-#include <linux/console.h>
-#include <linux/screen_info.h>
-#endif
-
-extern void mips_reboot_setup(void);
-
-unsigned long cpu_clock_freq;
-unsigned long bus_clock;
-unsigned int memsize;
-unsigned int highmemsize = 0;
-
-void __init plat_time_init(void)
-{
-	/* setup mips r4k timer */
-	mips_hpt_frequency = cpu_clock_freq / 2;
-}
-
-unsigned long read_persistent_clock(void)
-{
-	return mc146818_get_cmos_time();
-}
-
-void (*__wbflush)(void);
-EXPORT_SYMBOL(__wbflush);
-
-static void wbflush_loongson2e(void)
-{
-	asm(".set\tpush\n\t"
-	    ".set\tnoreorder\n\t"
-	    ".set mips3\n\t"
-	    "sync\n\t"
-	    "nop\n\t"
-	    ".set\tpop\n\t"
-	    ".set mips0\n\t");
-}
-
-void __init plat_mem_setup(void)
-{
-	set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE,
-				IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1));
-	mips_reboot_setup();
-
-	__wbflush = wbflush_loongson2e;
-
-	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
-#ifdef CONFIG_64BIT
-	if (highmemsize > 0) {
-		add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM);
-	}
-#endif
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-
-	screen_info = (struct screen_info) {
-		0, 25,		/* orig-x, orig-y */
-		    0,		/* unused */
-		    0,		/* orig-video-page */
-		    0,		/* orig-video-mode */
-		    80,		/* orig-video-cols */
-		    0, 0, 0,	/* ega_ax, ega_bx, ega_cx */
-		    25,		/* orig-video-lines */
-		    VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
-		    16		/* orig-video-points */
-	};
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-
-}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/bonito-irq.c linux-2.6.30/arch/mips/loongson/common/bonito-irq.c
--- linux-2.6.30.orig/arch/mips/loongson/common/bonito-irq.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/bonito-irq.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/interrupt.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+static inline void bonito_irq_enable(unsigned int irq)
+{
+	LOONGSON_INTENSET = (1 << (irq - LOONGSON_IRQ_BASE));
+	/* flush posted write */
+	(void)LOONGSON_INTENSET;
+	mmiowb();
+}
+
+static inline void bonito_irq_disable(unsigned int irq)
+{
+	LOONGSON_INTENCLR = (1 << (irq - LOONGSON_IRQ_BASE));
+	/* flush posted write */
+	(void)LOONGSON_INTENCLR;
+	mmiowb();
+}
+
+static struct irq_chip bonito_irq_type = {
+	.name	= "bonito_irq",
+	.ack	= bonito_irq_disable,
+	.mask	= bonito_irq_disable,
+	.mask_ack = bonito_irq_disable,
+	.unmask	= bonito_irq_enable,
+};
+
+/* there is no need to handle dma timeout in loongson-2f based machines */
+#ifdef CONFIG_CPU_LOONGSON2E
+static struct irqaction dma_timeout_irqaction = {
+	.handler	= no_action,
+	.name		= "dma_timeout",
+};
+#endif
+
+void bonito_irq_init(void)
+{
+	u32 i;
+
+	for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
+		set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
+
+#ifdef CONFIG_CPU_LOONGSON2E
+	setup_irq(LOONGSON_DMATIMEOUT_IRQ, &dma_timeout_irqaction);
+#endif
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/clock.c linux-2.6.30/arch/mips/loongson/common/clock.c
--- linux-2.6.30.orig/arch/mips/loongson/common/clock.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/clock.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,166 @@
+/*
+ * arch/mips/loongson/common/clock.c
+ *
+ * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/platform_device.h>
+
+#include <loongson.h>
+#include <clock.h>
+
+static LIST_HEAD(clock_list);
+static DEFINE_SPINLOCK(clock_lock);
+static DEFINE_MUTEX(clock_list_sem);
+
+/* Minimum CLK support */
+enum {
+	DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT,
+	DC_87PT, DC_DISABLE, DC_RESV
+};
+
+struct cpufreq_frequency_table loongson2f_clockmod_table[] = {
+	{DC_RESV, CPUFREQ_ENTRY_INVALID},
+	{DC_ZERO, CPUFREQ_ENTRY_INVALID},
+	{DC_25PT, 0},
+	{DC_37PT, 0},
+	{DC_50PT, 0},
+	{DC_62PT, 0},
+	{DC_75PT, 0},
+	{DC_87PT, 0},
+	{DC_DISABLE, 0},
+	{DC_RESV, CPUFREQ_TABLE_END},
+};
+EXPORT_SYMBOL_GPL(loongson2f_clockmod_table);
+
+static struct clk cpu_clk = {
+	.name = "cpu_clk",
+	.flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
+	.rate = 800000000,
+};
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return &cpu_clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+static void propagate_rate(struct clk *clk)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clock_list, node) {
+		if (likely(clkp->parent != clk))
+			continue;
+		if (likely(clkp->ops && clkp->ops->recalc))
+			clkp->ops->recalc(clkp);
+		if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
+			propagate_rate(clkp);
+	}
+}
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return (unsigned long)clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_set_rate_ex(clk, rate, 0);
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
+{
+	int ret = 0;
+	int regval;
+	int i;
+
+	if (likely(clk->ops && clk->ops->set_rate)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&clock_lock, flags);
+		ret = clk->ops->set_rate(clk, rate, algo_id);
+		spin_unlock_irqrestore(&clock_lock, flags);
+	}
+
+	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
+		propagate_rate(clk);
+
+	for (i = 0; loongson2f_clockmod_table[i].frequency != CPUFREQ_TABLE_END;
+	     i++) {
+		if (loongson2f_clockmod_table[i].frequency ==
+		    CPUFREQ_ENTRY_INVALID)
+			continue;
+		if (rate == loongson2f_clockmod_table[i].frequency)
+			break;
+	}
+	if (rate != loongson2f_clockmod_table[i].frequency)
+		return -ENOTSUPP;
+
+	clk->rate = rate;
+
+	regval = LOONGSON_CHIPCFG0;
+	regval = (regval & ~0x7) | (loongson2f_clockmod_table[i].index - 1);
+	LOONGSON_CHIPCFG0 = regval;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate_ex);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (likely(clk->ops && clk->ops->round_rate)) {
+		unsigned long flags, rounded;
+
+		spin_lock_irqsave(&clock_lock, flags);
+		rounded = clk->ops->round_rate(clk, rate);
+		spin_unlock_irqrestore(&clock_lock, flags);
+
+		return rounded;
+	}
+
+	return rate;
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
+
+/*
+ * This is the simple version of Loongson-2F wait
+ * Maybe we need do this in interrupt disabled content
+ */
+DEFINE_SPINLOCK(loongson2f_wait_lock);
+void loongson2f_cpu_wait(void)
+{
+	u32 cpu_freq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&loongson2f_wait_lock, flags);
+	cpu_freq = LOONGSON_CHIPCFG0;
+	LOONGSON_CHIPCFG0 &= ~0x7;	/* Put CPU into wait mode */
+	LOONGSON_CHIPCFG0 = cpu_freq;	/* Restore CPU state */
+	spin_unlock_irqrestore(&loongson2f_wait_lock, flags);
+}
+EXPORT_SYMBOL_GPL(loongson2f_cpu_wait);
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cmdline.c linux-2.6.30/arch/mips/loongson/common/cmdline.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cmdline.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cmdline.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,57 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <cmdline.h>
+
+int prom_argc;
+/* pmon passes arguments in 32bit pointers */
+int *_prom_argv;
+
+void __init prom_init_cmdline(void)
+{
+	int i;
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	prom_argc = fw_arg0;
+	_prom_argv = (int *)fw_arg1;
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+	for (i = 1; i < prom_argc; i++) {
+		l = (long)_prom_argv[i];
+		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
+		    >= sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, ((char *)l));
+		strcat(arcs_cmdline, " ");
+	}
+
+	/* machine specific prom_init_cmdline */
+	mach_prom_init_cmdline();
+
+	if ((strstr(arcs_cmdline, "console=")) == NULL)
+		strcat(arcs_cmdline, " console=ttyS0,115200");
+	if ((strstr(arcs_cmdline, "root=")) == NULL)
+		strcat(arcs_cmdline, " root=/dev/hda1");
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_acc.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_acc.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_acc.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_acc.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,156 @@
+/*
+ * the ACC Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/*
+ * acc_write: acc write transfering
+ */
+
+void pci_acc_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+		if (value & PCI_COMMAND_MASTER)
+			lo |= (0x03 << 8);
+		else
+			lo &= ~(0x03 << 8);
+		_wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_ACC_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if (value & 0x01) {
+			value &= 0xfffffffc;
+			hi = 0xA0000000 | ((value & 0x000ff000) >> 12);
+			lo = 0x000fff80 | ((value & 0x00000fff) << 20);
+			_wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo);
+		}
+		break;
+	case PCI_ACC_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+		/* disable all the usb interrupt in PIC */
+		lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT);
+		if (value)	/* enable all the acc interrupt in PIC */
+			lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+		break;
+	default:
+		break;
+	}
+
+	return;
+}
+
+/*
+ * acc_read: acc read transfering
+ */
+
+u32 pci_acc_read_reg(int reg)
+{
+	u32 hi, lo;
+	u32 conf_data = 0;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
+		if (((lo & 0xfff00000) || (hi & 0x000000ff))
+		    && ((hi & 0xf0000000) == 0xa0000000))
+			conf_data |= PCI_COMMAND_IO;
+		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+		if ((lo & 0x300) == 0x300)
+			conf_data |= PCI_COMMAND_MASTER;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_ACC_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_ACC_FLAG) {
+			conf_data = CS5536_ACC_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_IO;
+			lo &= ~SOFT_BAR_ACC_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
+			conf_data = (hi & 0x000000ff) << 12;
+			conf_data |= (lo & 0xfff00000) >> 20;
+			conf_data |= 0x01;
+			conf_data &= ~0x02;
+		}
+		break;
+	case PCI_BAR1_REG:
+	case PCI_BAR2_REG:
+	case PCI_BAR3_REG:
+	case PCI_BAR4_REG:
+	case PCI_BAR5_REG:
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_USB_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR);
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_ehci.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_ehci.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_ehci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_ehci.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,166 @@
+/*
+ * the EHCI Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ehci_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		if (value & PCI_COMMAND_MASTER)
+			hi |= PCI_COMMAND_MASTER;
+		else
+			hi &= ~PCI_COMMAND_MASTER;
+
+		if (value & PCI_COMMAND_MEMORY)
+			hi |= PCI_COMMAND_MEMORY;
+		else
+			hi &= ~PCI_COMMAND_MEMORY;
+		_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_EHCI_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if ((value & 0x01) == 0x00) {
+			_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+
+			value &= 0xfffffff0;
+			hi = 0x40000000 | ((value & 0xff000000) >> 24);
+			lo = 0x000fffff | ((value & 0x00fff000) << 8);
+			_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo);
+		}
+		break;
+	case PCI_EHCI_LEGSMIEN_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		hi &= 0x003f0000;
+		hi |= (value & 0x3f) << 16;
+		_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+		break;
+	case PCI_EHCI_FLADJ_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		hi &= ~0x00003f00;
+		hi |= value & 0x00003f00;
+		_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+		break;
+	default:
+		break;
+	}
+
+	return;
+}
+
+u32 pci_ehci_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		if (hi & PCI_COMMAND_MASTER)
+			conf_data |= PCI_COMMAND_MASTER;
+		if (hi & PCI_COMMAND_MEMORY)
+			conf_data |= PCI_COMMAND_MEMORY;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_EHCI_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_EHCI_FLAG) {
+			conf_data = CS5536_EHCI_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_MEMORY;
+			lo &= ~SOFT_BAR_EHCI_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+			conf_data = lo & 0xfffff000;
+		}
+		break;
+	case PCI_BAR1_REG:
+	case PCI_BAR2_REG:
+	case PCI_BAR3_REG:
+	case PCI_BAR4_REG:
+	case PCI_BAR5_REG:
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_USB_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+		break;
+	case PCI_EHCI_LEGSMIEN_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		conf_data = (hi & 0x003f0000) >> 16;
+		break;
+	case PCI_EHCI_LEGSMISTS_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		conf_data = (hi & 0x3f000000) >> 24;
+		break;
+	case PCI_EHCI_FLADJ_REG:
+		_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+		conf_data = hi & 0x00003f00;
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_flash.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_flash.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_flash.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_flash.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,452 @@
+/*
+ * the FLASH Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/*
+ * enable the region of flashs(NOR or NAND)
+ *
+ * the same as the DIVIL other modules above, two groups of regs should be
+ * modified here to control the region. DIVIL flash LBAR and the
+ * RCONFx(6~9 reserved).
+ */
+static void flash_lbar_enable(void)
+{
+	u32 hi, lo;
+	int offset;
+
+	for (offset = DIVIL_LBAR_FLSH0; offset <= DIVIL_LBAR_FLSH3; offset++) {
+		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+		hi |= 0x1;
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
+	}
+
+	for (offset = SB_R6; offset <= SB_R9; offset++) {
+		_rdmsr(SB_MSR_REG(offset), &hi, &lo);
+		lo |= 0x1;
+		_wrmsr(SB_MSR_REG(offset), hi, lo);
+	}
+
+	return;
+}
+
+/*
+ * disable the region of flashs(NOR or NAND)
+ */
+static void flash_lbar_disable(void)
+{
+	u32 hi, lo;
+	int offset;
+
+	for (offset = DIVIL_LBAR_FLSH0; offset <= DIVIL_LBAR_FLSH3; offset++) {
+		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+		hi &= ~0x01;
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
+	}
+	for (offset = SB_R6; offset <= SB_R9; offset++) {
+		_rdmsr(SB_MSR_REG(offset), &hi, &lo);
+		lo &= ~0x01;
+		_wrmsr(SB_MSR_REG(offset), hi, lo);
+	}
+
+	return;
+}
+
+#ifndef	CONFIG_CS5536_NOR_FLASH	/* for nand flash */
+
+void pci_flash_write_bar(int n, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	if (value == PCI_BAR_RANGE_MASK) {
+		/* make the flag for reading the bar length. */
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		lo |= (SOFT_BAR_FLSH0_FLAG << n);
+		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+	} else if ((value & 0x01) == 0x00) {
+		/* mem space nand flash native reg base addr */
+		hi = 0xfffff007;
+		lo &= CS5536_FLSH_RANGE;
+		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_FLSH0 + n), hi, lo);
+
+		/* RCONFx is 4KB in units for mem space. */
+		hi = ((value & 0xfffff000) << 12) |
+		    ((CS5536_FLSH_LENGTH & 0xfffff000) - (1 << 12)) | 0x00;
+		lo = ((value & 0xfffff000) << 12) | 0x01;
+		_wrmsr(SB_MSR_REG(SB_R6 + n), hi, lo);
+	}
+	return;
+}
+
+void pci_flash_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		if (value & PCI_COMMAND_MEMORY)
+			flash_lbar_enable();
+		else
+			flash_lbar_disable();
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		pci_flash_write_bar(0, value);
+		break;
+	case PCI_BAR1_REG:
+		pci_flash_write_bar(1, value);
+		break;
+	case PCI_BAR2_REG:
+		pci_flash_write_bar(2, value);
+		break;
+	case PCI_BAR3_REG:
+		pci_flash_write_bar(3, value);
+		break;
+	case PCI_FLASH_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+		/* disable all the flash interrupt in PIC */
+		lo &= ~(0xf << PIC_YSEL_LOW_FLASH_SHIFT);
+		if (value)	/* enable all the flash interrupt in PIC */
+			lo |= (CS5536_FLASH_INTR << PIC_YSEL_LOW_FLASH_SHIFT);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+		break;
+	case PCI_NAND_FLASH_TDATA_REG:
+		_wrmsr(DIVIL_MSR_REG(NANDF_DATA), hi, lo);
+		break;
+	case PCI_NAND_FLASH_TCTRL_REG:
+		lo &= 0x00000fff;
+		_wrmsr(DIVIL_MSR_REG(NANDF_CTRL), hi, lo);
+		break;
+	case PCI_NAND_FLASH_RSVD_REG:
+		_wrmsr(DIVIL_MSR_REG(NANDF_RSVD), hi, lo);
+		break;
+	case PCI_FLASH_SELECT_REG:
+		if (value == CS5536_IDE_FLASH_SIGNATURE) {
+			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
+			lo &= ~0x01;
+			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
+		}
+		break;
+	default:
+		break;
+	}
+
+	return;
+}
+
+u32 pci_flash_read_bar(int n)
+{
+	u32 hi, lo;
+	u32 conf_data = 0;
+
+	_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+	if (lo & (SOFT_BAR_FLSH0_FLAG << n)) {
+		conf_data = CS5536_FLSH_RANGE | PCI_BASE_ADDRESS_SPACE_MEMORY;
+		lo &= ~(SOFT_BAR_FLSH0_FLAG << n);
+		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+	} else {
+		_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_FLSH0 + n), &hi, &lo);
+		conf_data = lo;
+		conf_data &= ~0x0f;
+	}
+
+	return conf_data;
+}
+
+u32 pci_flash_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_FLASH_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		/* we just read one lbar for returning. */
+		_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_FLSH0), &hi, &lo);
+		if (hi & 0x1)
+			conf_data |= PCI_COMMAND_MEMORY;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(DIVIL_MSR_REG(DIVIL_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_FLASH_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		return pci_flash_read_bar(0);
+		break;
+	case PCI_BAR1_REG:
+		return pci_flash_read_bar(1);
+		break;
+	case PCI_BAR2_REG:
+		return pci_flash_read_bar(2);
+		break;
+	case PCI_BAR3_REG:
+		return pci_flash_read_bar(3);
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_FLASH_SUB_ID,
+				      CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_FLASH_INTR);
+		break;
+	case PCI_NAND_FLASH_TDATA_REG:
+		_rdmsr(DIVIL_MSR_REG(NANDF_DATA), &hi, &lo);
+		conf_data = lo;
+		break;
+	case PCI_NAND_FLASH_TCTRL_REG:
+		_rdmsr(DIVIL_MSR_REG(NANDF_CTRL), &hi, &lo);
+		conf_data = lo & 0x00000fff;
+		break;
+	case PCI_NAND_FLASH_RSVD_REG:
+		_rdmsr(DIVIL_MSR_REG(NANDF_RSVD), &hi, &lo);
+		conf_data = lo;
+		break;
+	case PCI_FLASH_SELECT_REG:
+		_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
+		conf_data = lo & 0x01;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+#else				/* CONFIG_CS5536_NOR_FLASH */
+
+void pci_flash_write_bar(int n, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	if (value == PCI_BAR_RANGE_MASK) {
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		lo |= (SOFT_BAR_FLSH0_FLAG << n);
+		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+	} else if (value & 0x01) {
+		/* IO space of 16bytes nor flash */
+		hi = 0x0000fff1;
+		lo &= CS5536_FLSH_RANGE;
+		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_FLSH0 + n), hi, lo);
+
+		/* RCONFx used for 16bytes reserved. */
+		hi = ((value & 0x000ffffc) << 12) | ((CS5536_FLSH_LENGTH - 4)
+						     << 12) | 0x01;
+		lo = ((value & 0x000ffffc) << 12) | 0x01;
+		_wrmsr(SB_MSR_REG(SB_R6 + n), hi, lo);
+	}
+	return;
+}
+
+void pci_flash_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		if (value & PCI_COMMAND_IO)
+			flash_lbar_enable();
+		else
+			flash_lbar_disable();
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		pci_flash_write_bar(0, value);
+		break;
+	case PCI_BAR1_REG:
+		pci_flash_write_bar(1, value);
+		break;
+	case PCI_BAR2_REG:
+		pci_flash_write_bar(2, value);
+		break;
+	case PCI_BAR3_REG:
+		pci_flash_write_bar(3, value);
+		break;
+	case PCI_FLASH_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+		/* disable all the flash interrupt in PIC */
+		lo &= ~(0xf << PIC_YSEL_LOW_FLASH_SHIFT);
+		if (value)	/* enable all the flash interrupt in PIC */
+			lo |= (CS5536_FLASH_INTR << PIC_YSEL_LOW_FLASH_SHIFT);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+		break;
+	case PCI_NOR_FLASH_CTRL_REG:
+		lo &= 0x000000ff;
+		_wrmsr(DIVIL_MSR_REG(NORF_CTRL), hi, lo);
+		break;
+	case PCI_NOR_FLASH_T01_REG:
+		_wrmsr(DIVIL_MSR_REG(NORF_T01), hi, lo);
+		break;
+	case PCI_NOR_FLASH_T23_REG:
+		_wrmsr(DIVIL_MSR_REG(NORF_T23), hi, lo);
+		break;
+	case PCI_FLASH_SELECT_REG:
+		if (value == CS5536_IDE_FLASH_SIGNATURE) {
+			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
+			lo &= ~0x01;
+			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
+		}
+		break;
+	default:
+		break;
+	}
+	return;
+}
+
+u32 pci_flash_read_bar(int n)
+{
+	u32 hi, lo;
+	u32 conf_data = 0;
+
+	_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+	if (lo & (SOFT_BAR_FLSH0_FLAG << n)) {
+		conf_data = CS5536_FLSH_RANGE | PCI_BASE_ADDRESS_SPACE_IO;
+		lo &= ~(SOFT_BAR_FLSH0_FLAG << n);
+		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+	} else {
+		_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_FLSH0 + n), &hi, &lo);
+		conf_data = lo & 0x0000ffff;
+		conf_data |= 0x01;
+		conf_data &= ~0x02;
+	}
+
+	return conf_data;
+}
+
+u32 pci_flash_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_FLASH_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		/* we just check one flash bar for returning. */
+		_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_FLSH0), &hi, &lo);
+		if (hi & PCI_COMMAND_IO)
+			conf_data |= PCI_COMMAND_IO;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(DIVIL_MSR_REG(DIVIL_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_FLASH_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		return pci_flash_read_bar(0);
+		break;
+	case PCI_BAR1_REG:
+		return pci_flash_read_bar(1);
+		break;
+	case PCI_BAR2_REG:
+		return pci_flash_read_bar(2);
+		break;
+	case PCI_BAR3_REG:
+		return pci_flash_read_bar(3);
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_FLASH_SUB_ID,
+				      CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_FLASH_INTR);
+		break;
+	case PCI_NOR_FLASH_CTRL_REG:
+		_rdmsr(DIVIL_MSR_REG(NORF_CTRL), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		break;
+	case PCI_NOR_FLASH_T01_REG:
+		_rdmsr(DIVIL_MSR_REG(NORF_T01), &hi, &lo);
+		conf_data = lo;
+		break;
+	case PCI_NOR_FLASH_T23_REG:
+		_rdmsr(DIVIL_MSR_REG(NORF_T23), &hi, &lo);
+		conf_data = lo;
+		break;
+	default:
+		break;
+	}
+	return conf_data;
+}
+#endif				/* CONFIG_CS5536_NOR_FLASH */
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_ide.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_ide.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_ide.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_ide.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,194 @@
+/*
+ * the IDE Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/*
+ * ide_write : ide write transfering
+ */
+void pci_ide_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+		if (value & PCI_COMMAND_MASTER)
+			lo |= (0x03 << 4);
+		else
+			lo &= ~(0x03 << 4);
+		_wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		value &= 0x0000ff00;
+		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+		hi &= 0xffffff00;
+		hi |= (value >> 8);
+		_wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
+		break;
+	case PCI_BAR4_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_IDE_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if (value & 0x01) {
+			lo = (value & 0xfffffff0) | 0x1;
+			_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
+
+			value &= 0xfffffffc;
+			hi = 0x60000000 | ((value & 0x000ff000) >> 12);
+			lo = 0x000ffff0 | ((value & 0x00000fff) << 20);
+			_wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo);
+		}
+		break;
+	case PCI_IDE_CFG_REG:
+		if (value == CS5536_IDE_FLASH_SIGNATURE) {
+			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
+			lo |= 0x01;
+			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
+		} else
+			_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+		break;
+	case PCI_IDE_DTC_REG:
+		_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
+		break;
+	case PCI_IDE_CAST_REG:
+		_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
+		break;
+	case PCI_IDE_ETC_REG:
+		_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
+		break;
+	case PCI_IDE_PM_REG:
+		_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
+		break;
+	default:
+		break;
+	}
+
+	return;
+}
+
+/*
+ * ide_read : ide read tranfering.
+ */
+u32 pci_ide_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
+		if (lo & 0xfffffff0)
+			conf_data |= PCI_COMMAND_IO;
+		_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+		if ((lo & 0x30) == 0x30)
+			conf_data |= PCI_COMMAND_MASTER;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_IDE_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+		hi &= 0x000000f8;
+		conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi);
+		break;
+	case PCI_BAR0_REG:
+	case PCI_BAR1_REG:
+	case PCI_BAR2_REG:
+	case PCI_BAR3_REG:
+		break;
+	case PCI_BAR4_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_IDE_FLAG) {
+			conf_data = CS5536_IDE_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_IO;
+			lo &= ~SOFT_BAR_IDE_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
+			conf_data = lo & 0xfffffff0;
+			conf_data |= 0x01;
+			conf_data &= ~0x02;
+		}
+		break;
+	case PCI_BAR5_REG:
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR);
+		break;
+	case PCI_IDE_CFG_REG:
+		_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+		conf_data = lo;
+		break;
+	case PCI_IDE_DTC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+		conf_data = lo;
+		break;
+	case PCI_IDE_CAST_REG:
+		_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+		conf_data = lo;
+		break;
+	case PCI_IDE_ETC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+		conf_data = lo;
+	case PCI_IDE_PM_REG:
+		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+		conf_data = lo;
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_isa.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_isa.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_isa.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_isa.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,376 @@
+/*
+ * the ISA Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/* common variables for PCI_ISA_READ/WRITE_BAR */
+static const u32 divil_msr_reg[6] = {
+	DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO),
+	DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ),
+	DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI),
+};
+
+static const u32 soft_bar_flag[6] = {
+	SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG,
+	SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG,
+};
+
+static const u32 sb_msr_reg[6] = {
+	SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2),
+	SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5),
+};
+
+static const u32 bar_space_range[6] = {
+	CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE,
+	CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE,
+};
+
+static const int bar_space_len[6] = {
+	CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH,
+	CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH,
+};
+
+/*
+ * enable the divil module bar space.
+ *
+ * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg
+ * and the RCONFx(0~5) reg to use the modules.
+ */
+static void divil_lbar_enable(void)
+{
+	u32 hi, lo;
+	int offset;
+
+	/*
+	 * The DIVIL IRQ is not used yet. and make the RCONF0 reserved.
+	 */
+
+	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
+		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+		hi |= 0x01;
+		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+	}
+	return;
+}
+
+/*
+ * disable the divil module bar space.
+ */
+static void divil_lbar_disable(void)
+{
+	u32 hi, lo;
+	int offset;
+
+	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
+		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+		hi &= ~0x01;
+		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+	}
+	return;
+}
+
+/*
+ * BAR write: write value to the n BAR
+ */
+
+void pci_isa_write_bar(int n, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	if (value == PCI_BAR_RANGE_MASK) {
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		lo |= soft_bar_flag[n];
+		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+	} else if (value & 0x01) {
+		/* NATIVE reg */
+		hi = 0x0000f001;
+		lo &= bar_space_range[n];
+		_wrmsr(divil_msr_reg[n], hi, lo);
+
+		/* RCONFx is 4bytes in units for I/O space */
+		hi = ((value & 0x000ffffc) << 12) |
+		    ((bar_space_len[n] - 4) << 12) | 0x01;
+		lo = ((value & 0x000ffffc) << 12) | 0x01;
+		_wrmsr(sb_msr_reg[n], hi, lo);
+	}
+
+	return;
+}
+
+/*
+ * BAR read: read the n BAR
+ */
+
+u32 pci_isa_read_bar(int n)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+	if (lo & soft_bar_flag[n]) {
+		conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO;
+		lo &= ~soft_bar_flag[n];
+		_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+	} else {
+		_rdmsr(divil_msr_reg[n], &hi, &lo);
+		conf_data = lo & bar_space_range[n];
+		conf_data |= 0x01;
+		conf_data &= ~0x02;
+	}
+	return conf_data;
+}
+
+/*
+ * isa_write : isa write transfering.
+ * WE assume that the ISA is not the BUS MASTER.!!!
+ */
+/* FAST BACK TO BACK '1' for BUS MASTER '0' for BUS SALVE */
+/* COMMAND :
+ * 	bit0 : IO SPACE ENABLE
+ *	bit1 : MEMORY SPACE ENABLE(ignore)
+ *	bit2 : BUS MASTER ENABLE(ignore)
+ *	bit3 : SPECIAL CYCLE(ignore)? default is ignored.
+ *	bit4 : MEMORY WRITE and INVALIDATE(ignore)
+ *	bit5 : VGA PALETTE(ignore)
+ *	bit6 : PARITY ERROR(ignore)? : default is ignored.
+ *	bit7 : WAIT CYCLE CONTROL(ignore)
+ *	bit8 : SYSTEM ERROR(ignore)
+ *	bit9 : FAST BACK TO BACK(ignore)
+ *	bit10-bit15 : RESERVED
+ * STATUS :
+ *	bit0-bit3 : RESERVED
+ *	bit4 : CAPABILITY LIST(ignore)
+ *	bit5 : 66MHZ CAPABLE
+ *	bit6 : RESERVED
+ *	bit7 : FAST BACK TO BACK(ignore)
+ *	bit8 : DATA PARITY ERROR DETECED(ignore)
+ *	bit9-bit10 : DEVSEL TIMING(ALL MEDIUM)
+ *	bit11: SIGNALED TARGET ABORT
+ *	bit12: RECEIVED TARGET ABORT
+ *	bit13: RECEIVED MASTER ABORT
+ *	bit14: SIGNALED SYSTEM ERROR
+ *	bit15: DETECTED PARITY ERROR
+ */
+
+void pci_isa_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+	u32 temp;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		if (value & PCI_COMMAND_IO)
+			divil_lbar_enable();
+		else
+			divil_lbar_disable();
+		break;
+	case PCI_STATUS:
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		temp = lo & 0x0000ffff;
+		if ((value & PCI_STATUS_SIG_TARGET_ABORT) &&
+		    (lo & SB_TAS_ERR_EN))
+			temp |= SB_TAS_ERR_FLAG;
+
+		if ((value & PCI_STATUS_REC_TARGET_ABORT) &&
+		    (lo & SB_TAR_ERR_EN))
+			temp |= SB_TAR_ERR_FLAG;
+
+		if ((value & PCI_STATUS_REC_MASTER_ABORT)
+		    && (lo & SB_MAR_ERR_EN))
+			temp |= SB_MAR_ERR_FLAG;
+
+		if ((value & PCI_STATUS_DETECTED_PARITY)
+		    && (lo & SB_PARE_ERR_EN))
+			temp |= SB_PARE_ERR_FLAG;
+
+		lo = temp;
+		_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		value &= 0x0000ff00;
+		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+		hi &= 0xffffff00;
+		hi |= (value >> 8);
+		_wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
+		break;
+	case PCI_BAR0_REG:
+		pci_isa_write_bar(0, value);
+		break;
+	case PCI_BAR1_REG:
+		pci_isa_write_bar(1, value);
+		break;
+	case PCI_BAR2_REG:
+		pci_isa_write_bar(2, value);
+		break;
+	case PCI_BAR3_REG:
+		pci_isa_write_bar(3, value);
+		break;
+	case PCI_BAR4_REG:
+		pci_isa_write_bar(4, value);
+		break;
+	case PCI_BAR5_REG:
+		pci_isa_write_bar(5, value);
+		break;
+	case PCI_UART1_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
+		/* disable uart1 interrupt in PIC */
+		lo &= ~(0xf << 24);
+		if (value)	/* enable uart1 interrupt in PIC */
+			lo |= (CS5536_UART1_INTR << 24);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
+		break;
+	case PCI_UART2_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
+		/* disable uart2 interrupt in PIC */
+		lo &= ~(0xf << 28);
+		if (value)	/* enable uart2 interrupt in PIC */
+			lo |= (CS5536_UART2_INTR << 28);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
+		break;
+	case PCI_ISA_FIXUP_REG:
+		if (value) {
+			/* enable the TARGET ABORT/MASTER ABORT etc. */
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			lo |= 0x00000063;
+			_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+		}
+
+	default:
+		/* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
+		break;
+	}
+
+	return;
+}
+
+/*
+ * isa_read : isa read transfering.
+ * we assume that the ISA is not the BUS MASTER.
+ */
+
+ /* COMMAND :
+  *     bit0 : IO SPACE ENABLE
+  *     bit1 : MEMORY SPACE ENABLE(ignore)
+  *     bit2 : BUS MASTER ENABLE(ignore)
+  *     bit3 : SPECIAL CYCLE(ignore)? default is ignored.
+  *     bit4 : MEMORY WRITE and INVALIDATE(ignore)
+  *     bit5 : VGA PALETTE(ignore)
+  *     bit6 : PARITY ERROR(ignore)? : default is ignored.
+  *     bit7 : WAIT CYCLE CONTROL(ignore)
+  *     bit8 : SYSTEM ERROR(ignore)
+  *     bit9 : FAST BACK TO BACK(ignore)
+  *     bit10-bit15 : RESERVED
+  * STATUS :
+  *     bit0-bit3 : RESERVED
+  *     bit4 : CAPABILITY LIST(ignore)
+  *     bit5 : 66MHZ CAPABLE
+  *     bit6 : RESERVED
+  *     bit7 : FAST BACK TO BACK(ignore)
+  *     bit8 : DATA PARITY ERROR DETECED(ignore)?
+  *     bit9-bit10 : DEVSEL TIMING(ALL MEDIUM)
+  *     bit11: SIGNALED TARGET ABORT
+  *     bit12: RECEIVED TARGET ABORT
+  *     bit13: RECEIVED MASTER ABORT
+  *     bit14: SIGNALED SYSTEM ERROR
+  *     bit15: DETECTED PARITY ERROR(?)
+  */
+
+u32 pci_isa_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		/* we just check the first LBAR for the IO enable bit, */
+		/* maybe we should changed later. */
+		_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo);
+		if (hi & 0x01)
+			conf_data |= PCI_COMMAND_IO;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		conf_data |= PCI_STATUS_FAST_BACK;
+
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_TAS_ERR_FLAG)
+			conf_data |= PCI_STATUS_SIG_TARGET_ABORT;
+		if (lo & SB_TAR_ERR_FLAG)
+			conf_data |= PCI_STATUS_REC_TARGET_ABORT;
+		if (lo & SB_MAR_ERR_FLAG)
+			conf_data |= PCI_STATUS_REC_MASTER_ABORT;
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_DETECTED_PARITY;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_ISA_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+		hi &= 0x000000f8;
+		conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi);
+		break;
+		/*
+		 * we only use the LBAR of DIVIL, no RCONF used.
+		 * all of them are IO space.
+		 */
+	case PCI_BAR0_REG:
+		return pci_isa_read_bar(0);
+		break;
+	case PCI_BAR1_REG:
+		return pci_isa_read_bar(1);
+		break;
+	case PCI_BAR2_REG:
+		return pci_isa_read_bar(2);
+		break;
+	case PCI_BAR3_REG:
+		break;
+	case PCI_BAR4_REG:
+		return pci_isa_read_bar(4);
+		break;
+	case PCI_BAR5_REG:
+		return pci_isa_read_bar(5);
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		/* no interrupt used here */
+		conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00);
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,257 @@
+/*
+ * CS5536 General timer functions
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu zhangjin, wuzj@lemote.com
+ *
+ * Reference: 'AMD Geode(TM) CS5536 Companion Device Data Book'
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <asm/time.h>
+
+#include <cs5536/cs5536_mfgpt.h>
+
+DEFINE_SPINLOCK(mfgpt_lock);
+EXPORT_SYMBOL(mfgpt_lock);
+
+static u32 mfgpt_base;
+
+/*
+ * Initialize the MFGPT timer.
+ *
+ * This is also called after resume to bring the MFGPT into operation again.
+ */
+/* setup register bit fields:
+ * 15: counter enable
+ * 14: compare2 output status, write 1 to clear when in event mode
+ * 13: compare1 output status
+ * 12: setup(ro)
+ * 11: stop enable, stop on sleep
+ * 10: external enable
+ * 9:8 compare2 mode; 00: disable, 01: compare on equal; 10: compare on GE,
+ * 	11 event: GE + irq
+ * 7:6 compare1 mode
+ * 5:  reverse enable, bit reverse of the counter
+ * 4:  clock select. 0: 32KHz, 1: 14.318MHz
+ * 3:0 counter prescaler scale factor.
+ * 	select the input clock divide-by value. 2^n
+ * bit 11:0 is write once
+ */
+
+static void init_mfgpt_timer(enum clock_event_mode mode,
+			     struct clock_event_device *evt)
+{
+	spin_lock(&mfgpt_lock);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		outw(COMPARE, MFGPT0_CMP2);	/* set comparator2 */
+		outw(0, MFGPT0_CNT);	/* set counter to 0 */
+		/* enable counter, comparator2 to event mode, 14.318MHz clock */
+		outw(0xe310, MFGPT0_SETUP);
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
+		    evt->mode == CLOCK_EVT_MODE_ONESHOT) {
+			/* disable counter */
+			outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP);
+		}
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* One shot setup */
+		outw(0xe300, MFGPT0_SETUP);
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		/* Nothing to do here */
+		break;
+	}
+	spin_unlock(&mfgpt_lock);
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in MFGPT ticks
+ */
+static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+	spin_lock(&mfgpt_lock);
+	outw(delta & 0xffff, MFGPT0_CMP2);	/* set comparator2 */
+	outw(0, MFGPT0_CNT);	/* set counter to 0 */
+	spin_unlock(&mfgpt_lock);
+
+	return 0;
+}
+
+static struct clock_event_device mfgpt_clockevent = {
+	.name = "mfgpt",
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_MODE_ONESHOT,
+	.set_mode = init_mfgpt_timer,
+	.set_next_event = mfgpt_next_event,
+	.irq = CS5536_MFGPT_INTR,
+};
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	u32 basehi;
+
+	/*
+	 * get MFGPT base address
+	 *
+	 * NOTE: do not remove me, it's need for the value of mfgpt_base is
+	 * variable
+	 */
+	_rdmsr(CS5536_DIVIL_MSR_BASE + DIVIL_LBAR_MFGPT, &basehi, &mfgpt_base);
+
+	/* ack */
+	outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP);
+
+	mfgpt_clockevent.event_handler(&mfgpt_clockevent);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq5 = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING,
+	.name = "timer"
+};
+
+/*
+ * Initialize the conversion factor and the min/max deltas of the clock event
+ * structure and register the clock event source with the framework.
+ */
+void __init setup_mfgpt_timer(void)
+{
+	u32 basehi;
+	struct clock_event_device *cd = &mfgpt_clockevent;
+	unsigned int cpu = smp_processor_id();
+
+	cd->cpumask = cpumask_of(cpu);
+	clockevent_set_clock(cd, MFGPT_TICK_RATE);
+	cd->max_delta_ns = clockevent_delta2ns(0xffff, cd);
+	cd->min_delta_ns = clockevent_delta2ns(0xf, cd);
+
+	/* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */
+	_wrmsr(CS5536_DIVIL_MSR_BASE + MFGPT_IRQ, 0, 0x100);
+
+	/* Enable Interrupt Gate 5 */
+	_wrmsr(CS5536_DIVIL_MSR_BASE + PIC_ZSEL_LOW, 0, 0x50000);
+
+	/* get MFGPT base address */
+	_rdmsr(CS5536_DIVIL_MSR_BASE + DIVIL_LBAR_MFGPT, &basehi, &mfgpt_base);
+
+	irq5.mask = cpumask_of_cpu(cpu);
+
+	clockevents_register_device(cd);
+
+	setup_irq(CS5536_MFGPT_INTR, &irq5);
+}
+
+/*
+ * Since the MFGPT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t mfgpt_read(struct clocksource *cs)
+{
+	unsigned long flags;
+	int count;
+	u32 jifs;
+	static int old_count;
+	static u32 old_jifs;
+
+	spin_lock_irqsave(&mfgpt_lock, flags);
+	/*
+	 * Although our caller may have the read side of xtime_lock,
+	 * this is now a seqlock, and we are cheating in this routine
+	 * by having side effects on state that we cannot undo if
+	 * there is a collision on the seqlock and our caller has to
+	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
+	 * jiffies as volatile despite the lock.  We read jiffies
+	 * before latching the timer count to guarantee that although
+	 * the jiffies value might be older than the count (that is,
+	 * the counter may underflow between the last point where
+	 * jiffies was incremented and the point where we latch the
+	 * count), it cannot be newer.
+	 */
+	jifs = jiffies;
+	/* latch the counter */
+	outw(inw(MFGPT0_SETUP) | 0x0200, MFGPT0_SETUP);
+	/* read the latched count */
+	count = inw(MFGPT0_CNT);
+	/* restart the counter */
+	outw(inw(MFGPT0_SETUP) & 0xfdff, MFGPT0_SETUP);
+
+	/* reset the latch if count > max + 1 */
+	if (count > COMPARE) {
+		/* set comparator2 */
+		outw(COMPARE, MFGPT0_CMP2);
+		/* set counter to 0 */
+		outw(0, MFGPT0_CNT);
+		/* enable counter, comparator2 to event mode, 14.318MHz clock */
+		outw(0xe310, MFGPT0_SETUP);
+
+		count = COMPARE - 1;
+	}
+
+	/*
+	 * It's possible for count to appear to go the wrong way for this
+	 * reason:
+	 *
+	 *  The timer counter underflows, but we haven't handled the resulting
+	 *  interrupt and incremented jiffies yet.
+	 *
+	 * Previous attempts to handle these cases intelligently were buggy, so
+	 * we just do the simple thing now.
+	 */
+	if (count > old_count && jifs == old_jifs)
+		count = old_count;
+
+	old_count = count;
+	old_jifs = jifs;
+
+	spin_unlock_irqrestore(&mfgpt_lock, flags);
+
+	return (cycle_t) (jifs * COMPARE) + count;
+}
+
+static struct clocksource clocksource_mfgpt = {
+	.name = "mfgpt",
+	.rating = 120, /* Functional for real use, but not desired */
+	.read = mfgpt_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	.mult = 0,
+	.shift = 22,
+};
+
+int __init init_mfgpt_clocksource(void)
+{
+	if (num_possible_cpus() > 1)	/* MFGPT does not scale! */
+		return 0;
+
+	clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22);
+	return clocksource_register(&clocksource_mfgpt);
+}
+
+arch_initcall(init_mfgpt_clocksource);
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_ohci.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_ohci.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_ohci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_ohci.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,168 @@
+/*
+ * the OHCI Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/*
+ * ohci_write : ohci write transfering.
+ */
+void pci_ohci_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+		if (value & PCI_COMMAND_MASTER)
+			hi |= PCI_COMMAND_MASTER;
+		else
+			hi &= ~PCI_COMMAND_MASTER;
+
+		if (value & PCI_COMMAND_MEMORY)
+			hi |= PCI_COMMAND_MEMORY;
+		else
+			hi &= ~PCI_COMMAND_MEMORY;
+		_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_OHCI_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if ((value & 0x01) == 0x00) {
+			_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
+
+			value &= 0xfffffff0;
+			hi = 0x40000000 | ((value & 0xff000000) >> 24);
+			lo = 0x000fffff | ((value & 0x00fff000) << 8);
+			_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo);
+		}
+		break;
+	case PCI_INTERRUPT_LINE:
+		value &= 0x000000ff;
+		break;
+	case PCI_OHCI_PM_REG:
+		break;
+	case PCI_OHCI_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+		lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT);
+		if (value)	/* enable all the usb interrupt in PIC */
+			lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT);
+		_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+		break;
+	default:
+		break;
+	}
+
+	return;
+}
+
+/*
+ * ohci_read : ohci read transfering.
+ */
+u32 pci_ohci_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+		if (hi & PCI_COMMAND_MASTER)
+			conf_data |= PCI_COMMAND_MASTER;
+		if (hi & PCI_COMMAND_MEMORY)
+			conf_data |= PCI_COMMAND_MEMORY;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_OHCI_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_OHCI_FLAG) {
+			conf_data = CS5536_OHCI_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_MEMORY;
+			lo &= ~SOFT_BAR_OHCI_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+			conf_data = lo & 0xffffff00;
+			conf_data &= ~0x0000000f;	/* 32bit mem */
+		}
+		break;
+	case PCI_BAR1_REG:
+	case PCI_BAR2_REG:
+	case PCI_BAR3_REG:
+	case PCI_BAR4_REG:
+	case PCI_BAR5_REG:
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_USB_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+		break;
+	case PCI_OHCI_PM_REG:
+		break;
+	case PCI_OHCI_INT_REG:
+		_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+		if ((lo & 0x00000f00) == CS5536_USB_INTR)
+			conf_data = 1;
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_otg.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_otg.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_otg.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_otg.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,138 @@
+/*
+ * the OTG Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_otg_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_OTG), &hi, &lo);
+		if (value & PCI_COMMAND_MEMORY)
+			hi |= PCI_COMMAND_MEMORY;
+		else
+			hi &= ~PCI_COMMAND_MEMORY;
+		_wrmsr(USB_MSR_REG(USB_OTG), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_OTG_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_OTG), &hi, &lo);
+			lo &= 0xffffff00;
+			_wrmsr(USB_MSR_REG(USB_OTG), hi, lo);
+
+			value &= 0xfffffff0;
+			hi = 0x40000000 | ((value & 0xff000000) >> 24);
+			lo = 0x000fffff | ((value & 0x00fff000) << 8);
+			_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM1), hi, lo);
+		}
+		break;
+	default:
+		break;
+	}
+
+	return;
+}
+
+u32 pci_otg_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_OTG_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_OTG), &hi, &lo);
+		if (hi & PCI_COMMAND_MEMORY)
+			conf_data |= PCI_COMMAND_MEMORY;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_OTG_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_OTG_FLAG) {
+			conf_data = CS5536_OTG_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_MEMORY;
+			lo &= ~SOFT_BAR_OTG_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(USB_MSR_REG(USB_OTG), &hi, &lo);
+			conf_data = lo & 0xffffff00;
+			conf_data &= ~0x0000000f;
+		}
+		break;
+	case PCI_BAR1_REG:
+	case PCI_BAR2_REG:
+	case PCI_BAR3_REG:
+	case PCI_BAR4_REG:
+	case PCI_BAR5_REG:
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_OTG_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_USB_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_pci.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_pci.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_pci.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,126 @@
+/*
+ * read/write operation to the PCI config space of CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ *	the Virtual Support Module(VSM) for virtulizing the PCI
+ *	configure space are defined in cs5536_modulename.c respectively,
+ *	so you can select modules which have been used in his/her board.
+ *	to archive this, you just need to add a "select CS5536_[MODULE]"
+ *	option in your board in arch/mips/loongson/Kconfig
+ *
+ *	after this virtulizing, user can access the PCI configure space
+ *	directly as a normal multi-function PCI device which following
+ *	the PCI-2.2 spec.
+ */
+
+#include <linux/types.h>
+#include <cs5536/cs5536_vsm.h>
+
+enum {
+	CS5536_FUNC_START = -1,
+	CS5536_ISA_FUNC,
+	CS5536_FLASH_FUNC,
+	CS5536_IDE_FUNC,
+	CS5536_ACC_FUNC,
+	CS5536_OHCI_FUNC,
+	CS5536_EHCI_FUNC,
+	CS5536_UDC_FUNC,
+	CS5536_OTG_FUNC,
+	CS5536_FUNC_END,
+};
+
+/*
+ * write to PCI config space and transfer it to MSR write.
+ */
+void cs5536_pci_conf_write4(int function, int reg, u32 value)
+{
+	if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
+		return;
+	if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0))
+		return;
+
+	switch (function) {
+	case CS5536_ISA_FUNC:
+		pci_isa_write_reg(reg, value);
+		break;
+	case CS5536_FLASH_FUNC:
+		pci_flash_write_reg(reg, value);
+		break;
+	case CS5536_IDE_FUNC:
+		pci_ide_write_reg(reg, value);
+		break;
+	case CS5536_ACC_FUNC:
+		pci_acc_write_reg(reg, value);
+		break;
+	case CS5536_OHCI_FUNC:
+		pci_ohci_write_reg(reg, value);
+		break;
+	case CS5536_EHCI_FUNC:
+		pci_ehci_write_reg(reg, value);
+		break;
+	case CS5536_UDC_FUNC:
+		pci_udc_write_reg(reg, value);
+		break;
+	case CS5536_OTG_FUNC:
+		pci_otg_write_reg(reg, value);
+		break;
+	default:
+		break;
+	}
+	return;
+}
+
+/*
+ * read PCI config space and transfer it to MSR access.
+ */
+u32 cs5536_pci_conf_read4(int function, int reg)
+{
+	u32 data = 0;
+
+	if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
+		return 0;
+	if ((reg < 0) || ((reg & 0x03) != 0))
+		return 0;
+	if (reg > 0x100)
+		return 0xffffffff;
+
+	switch (function) {
+	case CS5536_ISA_FUNC:
+		data = pci_isa_read_reg(reg);
+		break;
+	case CS5536_FLASH_FUNC:
+		data = pci_flash_read_reg(reg);
+		break;
+	case CS5536_IDE_FUNC:
+		data = pci_ide_read_reg(reg);
+		break;
+	case CS5536_ACC_FUNC:
+		data = pci_acc_read_reg(reg);
+		break;
+	case CS5536_OHCI_FUNC:
+		data = pci_ohci_read_reg(reg);
+		break;
+	case CS5536_EHCI_FUNC:
+		data = pci_ehci_read_reg(reg);
+		break;
+	case CS5536_UDC_FUNC:
+		data = pci_udc_read_reg(reg);
+		break;
+	case CS5536_OTG_FUNC:
+		data = pci_otg_read_reg(reg);
+		break;
+	default:
+		break;
+	}
+	return data;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_udc.c linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_udc.c
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/cs5536_udc.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/cs5536_udc.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,143 @@
+/*
+ * the UDC Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_udc_write_reg(int reg, u32 value)
+{
+	u32 hi = 0, lo = value;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_UDC), &hi, &lo);
+		if (value & PCI_COMMAND_MASTER)
+			hi |= PCI_COMMAND_MASTER;
+		else
+			hi &= ~PCI_COMMAND_MASTER;
+
+		if (value & PCI_COMMAND_MEMORY)
+			hi |= PCI_COMMAND_MEMORY;
+		else
+			hi &= ~PCI_COMMAND_MEMORY;
+		_wrmsr(USB_MSR_REG(USB_UDC), hi, lo);
+		break;
+	case PCI_STATUS:
+		if (value & PCI_STATUS_PARITY) {
+			_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+			if (lo & SB_PARE_ERR_FLAG) {
+				lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+				_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+			}
+		}
+		break;
+	case PCI_BAR0_REG:
+		if (value == PCI_BAR_RANGE_MASK) {
+			_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+			lo |= SOFT_BAR_UDC_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else if ((value & 0x01) == 0x00) {
+			_wrmsr(USB_MSR_REG(USB_UDC), hi, lo);
+
+			value &= 0xfffffff0;
+			hi = 0x40000000 | ((value & 0xff000000) >> 24);
+			lo = 0x000fffff | ((value & 0x00fff000) << 8);
+			_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM0), hi, lo);
+		}
+		break;
+	default:
+		break;
+	}
+
+	return;
+}
+
+u32 pci_udc_read_reg(int reg)
+{
+	u32 conf_data = 0;
+	u32 hi, lo;
+
+	switch (reg) {
+	case PCI_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_UDC_DEVICE_ID, CS5536_VENDOR_ID);
+		break;
+	case PCI_COMMAND:
+		_rdmsr(USB_MSR_REG(USB_UDC), &hi, &lo);
+		if (hi & PCI_COMMAND_MASTER)
+			conf_data |= PCI_COMMAND_MASTER;
+		if (hi & PCI_COMMAND_MEMORY)
+			conf_data |= PCI_COMMAND_MEMORY;
+		break;
+	case PCI_STATUS:
+		conf_data |= PCI_STATUS_66MHZ;
+		conf_data |= PCI_STATUS_FAST_BACK;
+		_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+		if (lo & SB_PARE_ERR_FLAG)
+			conf_data |= PCI_STATUS_PARITY;
+		conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+		break;
+	case PCI_CLASS_REVISION:
+		_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+		conf_data = lo & 0x000000ff;
+		conf_data |= (CS5536_UDC_CLASS_CODE << 8);
+		break;
+	case PCI_CACHE_LINE_SIZE:
+		conf_data =
+		    CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+					    PCI_NORMAL_LATENCY_TIMER);
+		break;
+	case PCI_BAR0_REG:
+		_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+		if (lo & SOFT_BAR_UDC_FLAG) {
+			conf_data = CS5536_UDC_RANGE |
+			    PCI_BASE_ADDRESS_SPACE_MEMORY;
+			lo &= ~SOFT_BAR_UDC_FLAG;
+			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+		} else {
+			_rdmsr(USB_MSR_REG(USB_UDC), &hi, &lo);
+			conf_data = lo & 0xfffff000;
+			conf_data &= ~0x0000000f;	/* 32bit mem */
+		}
+		break;
+	case PCI_BAR1_REG:
+	case PCI_BAR2_REG:
+	case PCI_BAR3_REG:
+	case PCI_BAR4_REG:
+	case PCI_BAR5_REG:
+		break;
+	case PCI_CARDBUS_CIS:
+		conf_data = PCI_CARDBUS_CIS_POINTER;
+		break;
+	case PCI_SUBSYSTEM_VENDOR_ID:
+		conf_data =
+		    CFG_PCI_VENDOR_ID(CS5536_UDC_SUB_ID, CS5536_SUB_VENDOR_ID);
+		break;
+	case PCI_ROM_ADDRESS:
+		conf_data = PCI_EXPANSION_ROM_BAR;
+		break;
+	case PCI_CAPABILITY_LIST:
+		conf_data = PCI_CAPLIST_USB_POINTER;
+		break;
+	case PCI_INTERRUPT_LINE:
+		conf_data =
+		    CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+		break;
+	default:
+		break;
+	}
+
+	return conf_data;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/cs5536/Makefile linux-2.6.30/arch/mips/loongson/common/cs5536/Makefile
--- linux-2.6.30.orig/arch/mips/loongson/common/cs5536/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/cs5536/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,25 @@
+#
+# Makefile for CS5536 support.
+#
+
+#
+# core modules
+#
+obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \
+			cs5536_isa.o cs5536_ehci.o
+#
+# selective modules
+#
+# add a CS5536_[MODULE] to your board in arch/mips/loongson/Kconfig
+#
+obj-$(CONFIG_CS5536_FLASH) += cs5536_flash.o
+obj-$(CONFIG_CS5536_NOR_FLASH) += cs5536_flash.o
+obj-$(CONFIG_CS5536_OTG) += cs5536_otg.o
+obj-$(CONFIG_CS5536_UDC) += cs5536_udc.o
+
+#
+# Enable cs5536 mfgpt Timer
+#
+obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o
+
+EXTRA_CFLAGS += -Werror
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/early_printk.c linux-2.6.30/arch/mips/loongson/common/early_printk.c
--- linux-2.6.30.orig/arch/mips/loongson/common/early_printk.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/early_printk.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,28 @@
+/*  early printk support
+ *
+ *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+void prom_putchar(char c)
+{
+	int timeout;
+	phys_addr_t uart_base =
+	    (phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8);
+	char reg = readb((u8 *) (uart_base + UART_LSR)) & UART_LSR_THRE;
+
+	for (timeout = 1024; reg == 0 && timeout > 0; timeout--)
+		reg = readb((u8 *) (uart_base + UART_LSR)) & UART_LSR_THRE;
+
+	writeb(c, (u8 *) (uart_base + UART_TX));
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/env.c linux-2.6.30/arch/mips/loongson/common/env.c
--- linux-2.6.30.orig/arch/mips/loongson/common/env.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/env.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,59 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+unsigned long bus_clock, cpu_clock_freq;
+unsigned long memsize, highmemsize;
+
+/* pmon passes arguments in 32bit pointers */
+int *_prom_envp;
+
+#define parse_even_earlier(res, option, p)				\
+do {									\
+	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
+			strict_strtol((char *)p + strlen(option"="),	\
+					10, &res);			\
+} while (0)
+
+void __init prom_init_env(void)
+{
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	_prom_envp = (int *)fw_arg2;
+
+	l = (long)*_prom_envp;
+	while (l != 0) {
+		parse_even_earlier(bus_clock, "busclock", l);
+		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
+		parse_even_earlier(memsize, "memsize", l);
+		parse_even_earlier(highmemsize, "highmemsize", l);
+		_prom_envp++;
+		l = (long)*_prom_envp;
+	}
+	if (memsize == 0)
+		memsize = 256;
+
+	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
+		bus_clock, cpu_clock_freq, memsize, highmemsize);
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/init.c linux-2.6.30/arch/mips/loongson/common/init.c
--- linux-2.6.30.orig/arch/mips/loongson/common/init.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/init.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,54 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+unsigned long _loongson_addrwincfg_base;
+
+/* Loongson CPU address windows config space base address */
+static inline void set_loongson_addrwincfg_base(unsigned long base)
+{
+	*(unsigned long *)&_loongson_addrwincfg_base = base;
+	barrier();
+}
+#endif
+
+void __init prom_init(void)
+{
+	/* init several base address */
+	set_io_port_base((unsigned long)
+			 ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	set_loongson_addrwincfg_base((unsigned long)
+				     ioremap(LOONGSON_ADDRWINCFG_BASE,
+					     LOONGSON_ADDRWINCFG_SIZE));
+#endif
+
+	prom_init_cmdline();
+	prom_init_env();
+	prom_init_memory();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/irq.c linux-2.6.30/arch/mips/loongson/common/irq.c
--- linux-2.6.30.orig/arch/mips/loongson/common/irq.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/irq.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+/*
+ * the first level int-handler will jump here if it is a loongson irq
+ */
+void bonito_irqdispatch(void)
+{
+	u32 int_status;
+	int i;
+
+	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
+	int_status = LOONGSON_INTISR;
+	while (int_status & (1 << 10)) {
+		udelay(1);
+		int_status = LOONGSON_INTISR;
+	}
+
+	/* Get pending sources, masked by current enables */
+	int_status = LOONGSON_INTISR & LOONGSON_INTEN;
+
+	if (int_status != 0) {
+		i = __ffs(int_status);
+		int_status &= ~(1 << i);
+		do_IRQ(LOONGSON_IRQ_BASE + i);
+	}
+}
+
+void i8259_irqdispatch(void)
+{
+	int irq;
+
+	irq = mach_i8259_irq();
+	if (irq < 0)
+		spurious_interrupt();
+	else
+		do_IRQ(irq);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	mach_irq_dispatch(pending);
+}
+
+
+static struct irqaction cascade_irqaction = {
+	.handler = no_action,
+	.name = "cascade",
+};
+
+/*
+ * fuloong2f and yeeloong2f share the cpu perf counter interrupt and the north
+ * bridge interrupt in IP6, so, the ip6_irqaction should be sharable.
+ * otherwise, we will can not request the perf counter irq(setup the perf
+ * counter irq handler) in op_model_loongson2.c.
+ */
+
+#if defined(CONFIG_OPROFILE) && \
+	(defined(CONFIG_LEMOTE_FULOONG2F) || defined(CONFIG_LEMOTE_YEELOONG2F))
+irqreturn_t ip6_action(int cpl, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static struct irqaction ip6_irqaction = {
+	.handler = ip6_action,
+	.name = "cascade",
+	.flags = IRQF_SHARED,
+};
+#else
+#define	ip6_irqaction	cascade_irqaction
+#endif
+
+void __init arch_init_irq(void)
+{
+	/*
+	 * Clear all of the interrupts while we change the able around a bit.
+	 * int-handler is not on bootstrap
+	 */
+	clear_c0_status(ST0_IM | ST0_BEV);
+	local_irq_disable();
+
+	/* setting irq trigger mode */
+	set_irq_trigger_mode();
+
+	/* no steer */
+	LOONGSON_INTSTEER = 0;
+
+	/*
+	 * Mask out all interrupt by writing "1" to all bit position in
+	 * the interrupt reset reg.
+	 */
+	LOONGSON_INTENCLR = ~0;
+
+	/* init all controller
+	 *   0-15         ------> i8259 interrupt
+	 *   16-23        ------> mips cpu interrupt
+	 *   32-63        ------> bonito irq
+	 */
+
+	/* Sets the first-level interrupt dispatcher. */
+	mips_cpu_irq_init();
+	init_i8259_irqs();
+	bonito_irq_init();
+
+	/* setup north bridge irq (bonito) */
+	setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
+	/* setup source bridge irq (i8259) */
+	setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/machtype.c linux-2.6.30/arch/mips/loongson/common/machtype.c
--- linux-2.6.30.orig/arch/mips/loongson/common/machtype.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/machtype.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+static const char *system_types[] = {
+	[MACH_LOONGSON_UNKNOWN]         "unknown loongson machine",
+	[MACH_LEMOTE_FL2E]              "lemote-fuloong-2e-box",
+	[MACH_LEMOTE_FL2F]              "lemote-fuloong-2f-box",
+	[MACH_LEMOTE_YL2F89]            "lemote-yeeloong-2f-8.9inches",
+	[MACH_LEMOTE_YL2F7]             "lemote-yeeloong-2f-7inches",
+	[MACH_LOONGSON_END]             NULL,
+};
+
+const char *get_system_type(void)
+{
+	if (mips_machtype == MACH_UNKNOWN)
+		mips_machtype = MACHTYPE;
+
+	return system_types[mips_machtype];
+}
+
+static __init int machtype_setup(char *str)
+{
+	int machtype = MACH_LEMOTE_FL2E;
+
+	if (!str)
+		return -EINVAL;
+
+	for (; system_types[machtype]; machtype++)
+		if (strstr(system_types[machtype], str)) {
+			mips_machtype = machtype;
+			break;
+		}
+	return 0;
+}
+__setup("machtype=", machtype_setup);
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/Makefile linux-2.6.30/arch/mips/loongson/common/Makefile
--- linux-2.6.30.orig/arch/mips/loongson/common/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,37 @@
+#
+# Makefile for loongson based machines.
+#
+
+obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
+	pci.o bonito-irq.o mem.o machtype.o
+
+#
+# Early printk support
+#
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+#
+# Enable RTC Class support
+#
+# please enable CONFIG_RTC_DRV_CMOS
+#
+obj-$(CONFIG_RTC_DRV_CMOS) += rtc.o
+
+#
+# Enable CS5536 Virtual Support Module(VSM) for virtulize the PCI configure
+# space
+#
+obj-$(CONFIG_CS5536) += cs5536/
+
+#
+# Enable fuloong(2f) and yeeloong(2f) cpu frequency scaling support
+# This is based on CS5536 mfgpt timer
+#
+obj-$(CONFIG_LOONGSON2F_CPU_FREQ) += clock.o
+
+#
+# Enable serial port
+#
+obj-$(CONFIG_SERIAL_8250) += serial.o
+
+EXTRA_CFLAGS += -Werror
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/mem.c linux-2.6.30/arch/mips/loongson/common/mem.c
--- linux-2.6.30.orig/arch/mips/loongson/common/mem.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/mem.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,116 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <mem.h>
+
+void __init prom_init_memory(void)
+{
+	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+#ifdef CONFIG_64BIT
+#ifdef CONFIG_CPU_LOONGSON2F
+	{
+		int bit;
+
+		bit = fls(memsize + highmemsize);
+		if (bit != ffs(memsize + highmemsize))
+			bit += 20;
+		else
+			bit = bit + 20 - 1;
+
+		/* set cpu window3 to map CPU to DDR: 2G -> 2G */
+		LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul,
+					  0x80000000ul, (1 << bit));
+		mmiowb();
+	}
+#endif				/* CONFIG_CPU_LOONGSON2F */
+
+	if (highmemsize > 0) {
+		add_memory_region(LOONGSON_HIGHMEM_START,
+				  highmemsize << 20, BOOT_MEM_RAM);
+	}
+#endif				/* CONFIG_64BIT */
+}
+
+/* override of arch/mips/mm/cache.c: __uncached_access */
+int __uncached_access(struct file *file, unsigned long addr)
+{
+	if (file->f_flags & O_SYNC)
+		return 1;
+
+	return addr >= __pa(high_memory) ||
+		((addr >= LOONGSON_MMIO_MEM_START) && \
+			(addr < LOONGSON_MMIO_MEM_END));
+}
+
+#if defined(CONFIG_CPU_LOONGSON2F)
+
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <asm/current.h>
+
+static unsigned long uca_start;
+static unsigned long uca_size = CONFIG_UCA_SIZE;
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot)
+{
+	unsigned long offset = pfn << PAGE_SHIFT;
+	unsigned long end = offset + size;
+
+	if (__uncached_access(file, offset)) {
+		if (((uca_start && offset) >= uca_start) && \
+				(end <= (uca_start + uca_size)))
+			return __pgprot((pgprot_val(vma_prot) & \
+						~_CACHE_MASK) | \
+					_CACHE_UNCACHED_ACCELERATED);
+		else
+			return pgprot_noncached(vma_prot);
+	}
+	return vma_prot;
+}
+
+static int __init find_vga_mem_init(void)
+{
+	struct pci_dev *dev = 0;
+	struct resource *r;
+	int idx;
+
+	if (uca_start)
+		return 0;
+
+	for_each_pci_dev(dev) {
+		if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
+			for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
+				r = &dev->resource[idx];
+				if (!r->start && r->end)
+					continue;
+				if (r->flags & IORESOURCE_IO)
+					continue;
+				if (r->flags & IORESOURCE_MEM) {
+					uca_start = r->start;
+
+					printk(KERN_INFO
+					"find the frame buffer:start=%lx\n",
+					uca_start);
+
+					return 0;
+				}
+			}
+
+		}
+	}
+	return 0;
+}
+
+late_initcall(find_vga_mem_init);
+#endif /* !CONFIG_CPU_LOONGSON2F */
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/pci.c linux-2.6.30/arch/mips/loongson/common/pci.c
--- linux-2.6.30.orig/arch/mips/loongson/common/pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/pci.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/pci.h>
+
+#include <loongson.h>
+#include <pci.h>
+
+static struct resource loongson_pci_mem_resource = {
+	.name   = "pci memory space",
+	.start  = LOONGSON_PCI_MEM_START,
+	.end    = LOONGSON_PCI_MEM_END,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct resource loongson_pci_io_resource = {
+	.name   = "pci io space",
+	.start  = LOONGSON_PCI_IO_START,	/* reserve regacy I/O space */
+	.end    = IO_SPACE_LIMIT,
+	.flags  = IORESOURCE_IO,
+};
+
+static struct pci_controller  loongson_pci_controller = {
+	.pci_ops        = &loongson_pci_ops,
+	.io_resource    = &loongson_pci_io_resource,
+	.mem_resource   = &loongson_pci_mem_resource,
+	.mem_offset     = 0x00000000UL,
+	.io_offset      = 0x00000000UL,
+};
+
+static void __init ict_pcimap(void)
+{
+	/*
+	 * local to PCI mapping for CPU accessing PCI space
+	 *
+	 * CPU address space [256M,448M] is window for accessing pci space
+	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
+	 *
+	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
+	 *           [<2G]   [384M,448M] [320M,384M] [0M,64M]
+	 */
+	LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 |
+	    LOONGSON_PCIMAP_WIN(2, 0x18000000) |
+	    LOONGSON_PCIMAP_WIN(1, 0x14000000) |
+	    LOONGSON_PCIMAP_WIN(0, 0);
+
+	/*
+	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
+	 */
+	LOONGSON_PCIBASE0 = 0x80000000ul;	/* base: 2G -> mmap: 0M */
+	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
+	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
+	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
+	LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul;	/* set this BAR as invalid */
+	LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
+	LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul;	/* set this BAR as invalid */
+	LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
+
+	/* avoid deadlock of PCI reading/writing lock operation */
+	LOONGSON_PCI_ISR4C = 0xd2000001ul;
+
+	/* can not change gnt to break pci transfer when device's gnt not
+	deassert for some broken device */
+	LOONGSON_PXARB_CFG = 0x00fe0105ul;
+
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	/*
+	 * set cpu addr window2 to map CPU address space to PCI address space
+	 */
+	LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC,
+			LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE);
+#endif
+}
+
+static int __init pcibios_init(void)
+{
+	ict_pcimap();
+
+	loongson_pci_controller.io_map_base = mips_io_port_base;
+
+	register_pci_controller(&loongson_pci_controller);
+
+	return 0;
+}
+
+arch_initcall(pcibios_init);
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/reset.c linux-2.6.30/arch/mips/loongson/common/reset.c
--- linux-2.6.30.orig/arch/mips/loongson/common/reset.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/reset.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,38 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ */
+
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+
+#include <loongson.h>
+
+static void loongson_restart(char *command)
+{
+	/* perform board-specific pre-reboot operations */
+	mach_prepare_reboot();
+
+	/* reboot via jumping to 0xbfc00000 */
+	((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+}
+
+static void loongson_halt(void)
+{
+	mach_prepare_shutdown();
+	while (1)
+		;
+}
+
+void __init loongson_reboot_setup(void)
+{
+	_machine_restart = loongson_restart;
+	_machine_halt = loongson_halt;
+	pm_power_off = loongson_halt;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/rtc.c linux-2.6.30/arch/mips/loongson/common/rtc.c
--- linux-2.6.30.orig/arch/mips/loongson/common/rtc.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/rtc.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,54 @@
+/*
+ *  Registration of Cobalt RTC platform device.
+ *
+ *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2009  Wu Zhangjin <wuzj@lemote.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ *  MA  02110-1301  USA
+ */
+
+#include <linux/ioport.h>
+#include <linux/mc146818rtc.h>
+#include <linux/platform_device.h>
+
+static struct resource rtc_cmos_resource[] = {
+	{
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(1),
+		.flags	= IORESOURCE_IO,
+	},
+	{
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_cmos_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_cmos_resource),
+	.resource	= rtc_cmos_resource
+};
+
+static __init int rtc_cmos_init(void)
+{
+	platform_device_register(&rtc_cmos_device);
+
+	return 0;
+}
+
+device_initcall(rtc_cmos_init);
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/serial.c linux-2.6.30/arch/mips/loongson/common/serial.c
--- linux-2.6.30.orig/arch/mips/loongson/common/serial.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/serial.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,66 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: yanhua (yanhua@lemote.com)
+ * Author: Wu Zhangjin (wuzj@lemote.com)
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define PORT(int, base_baud, io_type)				\
+{								\
+	.irq		= int,					\
+	.uartclk	= base_baud,				\
+	.iotype		= io_type,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
+	.regshift	= 0,					\
+}
+
+static struct plat_serial8250_port uart8250_data[] = {
+	PORT(LOONGSON_UART_IRQ, LOONGSON_UART_BAUD, LOONGSON_UART_IOTYPE),
+	{},
+};
+
+static struct platform_device uart8250_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = uart8250_data,
+		},
+};
+
+static inline void uart8250_init(void)
+{
+#if (LOONGSON_UART_IOTYPE == UPIO_MEM)
+		uart8250_data[0].membase =
+		    ioremap_nocache(LOONGSON_UART_BASE, 8);
+#elif (LOONGSON_UART_IOTYPE == UPIO_PORT)
+		uart8250_data[0].iobase =
+				LOONGSON_UART_BASE - LOONGSON_PCIIO_BASE;
+		uart8250_data[0].irq -= MIPS_CPU_IRQ_BASE;
+#else
+#warning currently, no such iotype of uart used in loongson-based machines
+
+#endif
+}
+
+static int __init serial_init(void)
+{
+	uart8250_init();
+
+	platform_device_register(&uart8250_device);
+
+	return 0;
+}
+
+device_initcall(serial_init);
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/setup.c linux-2.6.30/arch/mips/loongson/common/setup.c
--- linux-2.6.30.orig/arch/mips/loongson/common/setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/setup.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,74 @@
+/*
+ * board dependent setup routines
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+
+#include <asm/wbflush.h>
+
+#include <loongson.h>
+
+void (*__wbflush) (void);
+EXPORT_SYMBOL(__wbflush);
+
+static void loongson_wbflush(void)
+{
+	asm(".set\tpush\n\t"
+	    ".set\tnoreorder\n\t"
+	    ".set mips3\n\t"
+	    "sync\n\t"
+	    "nop\n\t"
+	    ".set\tpop\n\t"
+	    ".set mips0\n\t");
+}
+
+void __init loongson_wbflush_setup(void)
+{
+	__wbflush = loongson_wbflush;
+}
+
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+#include <linux/screen_info.h>
+
+void __init loongson_screeninfo_setup(void)
+{
+	screen_info = (struct screen_info) {
+		    0,		/* orig-x */
+		    25,		/* orig-y */
+		    0,		/* unused */
+		    0,		/* orig-video-page */
+		    0,		/* orig-video-mode */
+		    80,		/* orig-video-cols */
+		    0,		/* ega_ax */
+		    0,		/* ega_bx */
+		    0,		/* ega_cx */
+		    25,		/* orig-video-lines */
+		    VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
+		    16		/* orig-video-points */
+	};
+}
+#else
+void __init loongson_screeninfo_setup(void)
+{
+}
+#endif
+
+void __init plat_mem_setup(void)
+{
+	loongson_reboot_setup();
+
+	loongson_wbflush_setup();
+
+	loongson_screeninfo_setup();
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/common/time.c linux-2.6.30/arch/mips/loongson/common/time.c
--- linux-2.6.30.orig/arch/mips/loongson/common/time.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/common/time.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,34 @@
+/*
+ * board dependent boot routines
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+
+#include <loongson.h>
+#ifdef CONFIG_CS5536_MFGPT
+#include <cs5536/cs5536_mfgpt.h>
+#endif
+
+unsigned long read_persistent_clock(void)
+{
+	return mc146818_get_cmos_time();
+}
+
+void __init plat_time_init(void)
+{
+	/* setup mips r4k timer */
+	mips_hpt_frequency = cpu_clock_freq / 2;
+
+#ifdef CONFIG_CS5536_MFGPT
+	setup_mfgpt_timer();
+#endif
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/fuloong-2e/irq.c linux-2.6.30/arch/mips/loongson/fuloong-2e/irq.c
--- linux-2.6.30.orig/arch/mips/loongson/fuloong-2e/irq.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/fuloong-2e/irq.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/interrupt.h>
+
+#include <asm/i8259.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+int mach_i8259_irq(void)
+{
+	return i8259_irq();
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+	if (pending & CAUSEF_IP7)
+		do_IRQ(LOONGSON_TIMER_IRQ);
+	else if (pending & CAUSEF_IP6)	/* perf counter loverflow */
+		do_IRQ(LOONGSON_PERFCNT_IRQ);
+	else if (pending & CAUSEF_IP5)
+		i8259_irqdispatch();
+	else if (pending & CAUSEF_IP2)
+		bonito_irqdispatch();
+	else
+		spurious_interrupt();
+}
+
+void __init set_irq_trigger_mode(void)
+{
+	/* most bonito irq should be level triggered */
+	LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
+		LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/fuloong-2e/Makefile linux-2.6.30/arch/mips/loongson/fuloong-2e/Makefile
--- linux-2.6.30.orig/arch/mips/loongson/fuloong-2e/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/fuloong-2e/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,7 @@
+#
+# Makefile for fuloong-2e
+#
+
+obj-y += irq.o reset.o
+
+EXTRA_CFLAGS += -Werror
diff -Nur linux-2.6.30.orig/arch/mips/loongson/fuloong-2e/reset.c linux-2.6.30/arch/mips/loongson/fuloong-2e/reset.c
--- linux-2.6.30.orig/arch/mips/loongson/fuloong-2e/reset.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/fuloong-2e/reset.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,26 @@
+/* Board-specific reboot/shutdown routines
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <loongson.h>
+
+void mach_prepare_reboot(void)
+{
+	LOONGSON_GENCFG &= ~LOONGSON_GENCFG_CPUSELFRESET;
+	LOONGSON_GENCFG |= LOONGSON_GENCFG_CPUSELFRESET;
+}
+
+void mach_prepare_shutdown(void)
+{
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/fuloong-2f/irq.c linux-2.6.30/arch/mips/loongson/fuloong-2f/irq.c
--- linux-2.6.30.orig/arch/mips/loongson/fuloong-2f/irq.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/fuloong-2f/irq.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/interrupt.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+int mach_i8259_irq(void)
+{
+	int irq, isr, imr;
+
+	irq = -1;
+
+	if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
+		imr = inb(0x21) | (inb(0xa1) << 8);
+		isr = inb(0x20) | (inb(0xa0) << 8);
+		isr &= ~0x4;	/* irq2 for cascade */
+		isr &= ~imr;
+		irq = ffs(isr) - 1;
+	}
+
+	return irq;
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+	if (pending & CAUSEF_IP7)
+		do_IRQ(LOONGSON_TIMER_IRQ);
+	else if (pending & CAUSEF_IP6) {
+		do_IRQ(LOONGSON_PERFCNT_IRQ);	/* Perf counter overflow */
+		bonito_irqdispatch();		/* North Bridge */
+	} else if (pending & CAUSEF_IP3)	/* CPU UART */
+		do_IRQ(LOONGSON_UART_IRQ);
+	else if (pending & CAUSEF_IP2)	/* South Bridge */
+		i8259_irqdispatch();
+	else
+		spurious_interrupt();
+}
+
+void __init set_irq_trigger_mode(void)
+{
+	/* setup cs5536 as high level trigger */
+	LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
+	LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/fuloong-2f/Makefile linux-2.6.30/arch/mips/loongson/fuloong-2f/Makefile
--- linux-2.6.30.orig/arch/mips/loongson/fuloong-2f/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/fuloong-2f/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,5 @@
+#
+# Makefile for fuloong-2f
+#
+
+obj-y += irq.o reset.o
diff -Nur linux-2.6.30.orig/arch/mips/loongson/fuloong-2f/reset.c linux-2.6.30/arch/mips/loongson/fuloong-2f/reset.c
--- linux-2.6.30.orig/arch/mips/loongson/fuloong-2f/reset.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/fuloong-2f/reset.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,65 @@
+/* Board-specific reboot/shutdown routines
+ *
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <loongson.h>
+
+/* cs5536 is the south bridge used by fuloong2f mini PC */
+#include <cs5536/cs5536.h>
+
+void mach_prepare_reboot(void)
+{
+	/*
+	 * reset cpu to full speed, this is needed when enabling cpu frequency
+	 * scalling
+	 */
+	LOONGSON_CHIPCFG0 |= 0x7;
+
+	/* send a reset signal to south bridge.
+	 *
+	 * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset
+	 * normally with this reset operation and it will not work in PMON, but
+	 * you can type halt command and then reboot, seems the hardware reset
+	 * logic not work normally.
+	 */
+	{
+		u32 hi, lo;
+		_rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo);
+		lo |= 0x00000001;
+		_wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo);
+	}
+}
+
+void mach_prepare_shutdown(void)
+{
+	u32 hi, lo, val;
+	phys_addr_t gpio_base;
+
+	_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo);
+
+	gpio_base = mips_io_port_base | (lo & 0xff00);
+
+	/* make cs5536 gpio13 output enable */
+	val = (readl((u32 *) (gpio_base + GPIOL_OUT_EN)) & ~(1 << (16 + 13)))
+	    | (1 << 13);
+	writel(val, (u32 *) (gpio_base + GPIOL_OUT_EN));
+	mmiowb();
+	/* make cs5536 gpio13 output low level voltage. */
+	val = (readl((u32 *) (gpio_base + GPIOL_OUT_VAL)) & ~(1 << (13)))
+	    | (1 << (16 + 13));
+	writel(val, (u32 *) (gpio_base + GPIOL_OUT_VAL));
+	mmiowb();
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/Kconfig linux-2.6.30/arch/mips/loongson/Kconfig
--- linux-2.6.30.orig/arch/mips/loongson/Kconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/Kconfig	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,135 @@
+choice
+	prompt "Machine Type"
+	depends on MACH_LOONGSON
+
+config LEMOTE_FULOONG2E
+	bool "Lemote Fuloong(2e) mini-PC"
+	select ARCH_SPARSEMEM_ENABLE
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_LOONGSON2E
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select IRQ_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select CPU_HAS_WB
+	help
+	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
+	  an FPGA northbridge
+
+	  Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+
+config LEMOTE_FULOONG2F
+	bool "Lemote Fuloong(2f) mini-PC"
+	select ARCH_SPARSEMEM_ENABLE
+	select CEVT_R4K if !CS5536_MFGPT
+	select CSRC_R4K if !CS5536_MFGPT
+	select SYS_HAS_CPU_LOONGSON2F
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select IRQ_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select CPU_HAS_WB
+	select CS5536
+	help
+	  Lemote Fuloong(2f) mini-PC board based on the Chinese Loongson-2F
+	  CPU, which has an internal DDR and PCIX controller. the PCIX
+	  controller have the similiar programming interface of the FPGA north
+	  bridge of LOONGSON2E.
+
+	  Lemote Fuloong(2f) mini PC have an AMD CS5536 south bridge.
+
+config LEMOTE_YEELOONG2F
+	bool "Lemote Yeeloong(2f) mini Notebook"
+	select ARCH_SPARSEMEM_ENABLE
+	select CEVT_R4K if !CS5536_MFGPT
+	select CSRC_R4K if !CS5536_MFGPT
+	select SYS_HAS_CPU_LOONGSON2F
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select IRQ_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_MACH_PROM_INIT_CMDLINE
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select CPU_HAS_WB
+	select CS5536
+	help
+	  Lemote Laptop based on the Chinese Loongson-2F CPU, which has an
+	  internal DDR and PCIX controller. the PCIX controller have the
+	  similiar programming interface of the FPGA north bridge of
+	  LOONGSON2E.
+
+	  Lemote Yeeloong(2f) laptop have an AMD CS5536 south bridge and an EC
+	  controller.
+
+endchoice
+
+config CS5536
+	bool
+
+config CS5536_FLASH
+	bool
+	depends on CS5536
+
+config CS5536_NOR_FLASH
+	bool
+	depends on CS5536_FLASH
+
+config CS5536_OTG
+	bool
+	depends on CS5536
+
+config CS5536_UDC
+	bool
+	depends on CS5536
+
+config SYS_HAS_MACH_PROM_INIT_CMDLINE
+	bool
+
+config CS5536_MFGPT
+	bool "Using cs5536's MFGPT as system clock"
+	depends on CS5536
+	help
+	  This is needed if cpufreq and oprofile is enabled in Loongson2(F)
+	  machines
+
+config UCA_SIZE
+	hex "Uncache Accelerated Region size"
+	depends on CPU_LOONGSON2F
+	default 0x400000 if LEMOTE_YEELOONG2F
+	default 0x2000000 if LEMOTE_FULOONG2F
+	help
+	  Uncached Acceleration(UCA) can greatly improve video performance.
+	  Normally the Video memory can be accessed in Uncached Accelerated mode,
+	  other peripheral spaces not.
+
+	  Specify a zeroed size to disable this feature.
diff -Nur linux-2.6.30.orig/arch/mips/loongson/Makefile linux-2.6.30/arch/mips/loongson/Makefile
--- linux-2.6.30.orig/arch/mips/loongson/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,23 @@
+#
+# Common code for all Loongson based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON) += common/
+
+#
+# Lemote Fuloong mini-PC (Loongson 2E-based)
+#
+
+obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fuloong-2e/
+
+#
+# Lemote Fuloong mini-PC (Loongson 2F-based)
+#
+
+obj-$(CONFIG_LEMOTE_FULOONG2F)	+= fuloong-2f/
+
+#
+# Lemote Yeeloong mini-PC (Loongson 2F-based)
+#
+
+obj-$(CONFIG_LEMOTE_YEELOONG2F)	+= yeeloong-2f/
diff -Nur linux-2.6.30.orig/arch/mips/loongson/yeeloong-2f/init.c linux-2.6.30/arch/mips/loongson/yeeloong-2f/init.c
--- linux-2.6.30.orig/arch/mips/loongson/yeeloong-2f/init.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/yeeloong-2f/init.c	2009-06-14 20:26:27.000000000 +0200
@@ -0,0 +1,80 @@
+/*
+ * board specific init routines
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+
+#include <cs5536/cs5536.h>
+
+void __init mach_prom_init_cmdline(void)
+{
+	/* set lpc irq to quiet mode */
+	_wrmsr(DIVIL_MSR_REG(DIVIL_LEG_IO), 0x00, 0x16000003);
+
+	/*Emulate post for usb */
+	_wrmsr(USB_MSR_REG(USB_CONFIG), 0x4, 0xBF000);
+
+	if (strstr(arcs_cmdline, "no_auto_cmd") == NULL) {
+		unsigned char default_root[50] = "/dev/hda1";
+		char *pmon_ver, *ec_ver, *p, version[60], ec_version[64];
+
+		p = arcs_cmdline;
+
+		pmon_ver = strstr(arcs_cmdline, "PMON_VER");
+		if (pmon_ver) {
+			p = strstr(pmon_ver, " ");
+			if (p)
+				*p++ = '\0';
+			strncpy(version, pmon_ver, 60);
+		} else
+			strncpy(version, "PMON_VER=Unknown", 60);
+
+		ec_ver = strstr(p, "EC_VER");
+		if (ec_ver) {
+			p = strstr(ec_ver, " ");
+			if (p)
+				*p = '\0';
+			strncpy(ec_version, ec_ver, 64);
+		} else
+			strncpy(ec_version, "EC_VER=Unknown", 64);
+
+		p = strstr(arcs_cmdline, "root=");
+		if (p) {
+			strncpy(default_root, p, sizeof(default_root));
+			p = strstr(default_root, " ");
+			if (p)
+				*p = '\0';
+		}
+
+		memset(arcs_cmdline, 0, sizeof(arcs_cmdline));
+		strcat(arcs_cmdline, version);
+		strcat(arcs_cmdline, " ");
+		strcat(arcs_cmdline, ec_version);
+		strcat(arcs_cmdline, " ");
+		strcat(arcs_cmdline, default_root);
+		strcat(arcs_cmdline, " console=tty");
+	}
+
+	/*
+	 * automatically pass the vga argument via machtype argument if
+	 * vga is not passed: yeeloong-7inch's vga mode is 800x480x24
+	 */
+
+	if ((strstr(arcs_cmdline, "vga") == NULL)
+			&& (strstr(arcs_cmdline, "machtype") != NULL)
+				&& (strstr(arcs_cmdline, "7inch") != NULL))
+		strcat(arcs_cmdline, " vga=800x480x16");
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/yeeloong-2f/irq.c linux-2.6.30/arch/mips/loongson/yeeloong-2f/irq.c
--- linux-2.6.30.orig/arch/mips/loongson/yeeloong-2f/irq.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/yeeloong-2f/irq.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/interrupt.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+int mach_i8259_irq(void)
+{
+	int irq, isr, imr;
+
+	irq = -1;
+
+	if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
+		imr = inb(0x21) | (inb(0xa1) << 8);
+		isr = inb(0x20) | (inb(0xa0) << 8);
+		isr &= ~0x4;	/* irq2 for cascade */
+		isr &= ~imr;
+		irq = ffs(isr) - 1;
+	}
+
+	return irq;
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+	if (pending & CAUSEF_IP7)
+		do_IRQ(LOONGSON_TIMER_IRQ);
+	else if (pending & CAUSEF_IP6) {
+		do_IRQ(LOONGSON_PERFCNT_IRQ);	/* Perf counter overflow */
+		bonito_irqdispatch();		/* North Bridge */
+	} else if (pending & CAUSEF_IP3)	/* CPU UART */
+		do_IRQ(LOONGSON_UART_IRQ);
+	else if (pending & CAUSEF_IP2)	/* South Bridge */
+		i8259_irqdispatch();
+	else
+		spurious_interrupt();
+}
+
+void __init set_irq_trigger_mode(void)
+{
+	/* setup cs5536 as high level trigger */
+	LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
+	LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
+}
diff -Nur linux-2.6.30.orig/arch/mips/loongson/yeeloong-2f/Makefile linux-2.6.30/arch/mips/loongson/yeeloong-2f/Makefile
--- linux-2.6.30.orig/arch/mips/loongson/yeeloong-2f/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/yeeloong-2f/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,5 @@
+#
+# Makefile for fuloong-2f
+#
+
+obj-y += init.o irq.o reset.o
diff -Nur linux-2.6.30.orig/arch/mips/loongson/yeeloong-2f/reset.c linux-2.6.30/arch/mips/loongson/yeeloong-2f/reset.c
--- linux-2.6.30.orig/arch/mips/loongson/yeeloong-2f/reset.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/loongson/yeeloong-2f/reset.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,91 @@
+/* Board-specific reboot/shutdown routines
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+/*
+ * The following registers are determined by the EC index configuration.
+ * 1, fill the PORT_HIGH as EC register high part.
+ * 2, fill the PORT_LOW as EC register low part.
+ * 3, fill the PORT_DATA as EC register write data or get the data from it.
+ */
+#define	EC_RESET_IO_PORT_HIGH	0x0381
+#define	EC_RESET_IO_PORT_LOW	0x0382
+#define	EC_RESET_IO_PORT_DATA	0x0383
+#define	REG_RESET_HIGH	0xF4	/* reset the machine auto-clear : rd/wr */
+#define REG_RESET_LOW	0xEC
+#define	BIT_RESET_ON	(1 << 0)
+
+/* 7inch yeeloong have the different shutdown hardware logic from 8.9inch */
+#define	EC_SHUTDOWN_IO_PORT_HIGH	0xff2d
+#define	EC_SHUTDOWN_IO_PORT_LOW		0xff2e
+#define	EC_SHUTDOWN_IO_PORT_DATA	0xff2f
+#define	REG_SHUTDOWN_HIGH	0xFC
+#define REG_SHUTDOWN_LOW	0x29
+#define	BIT_SHUTDOWN_ON	(1 << 1)
+
+void mach_prepare_reboot(void)
+{
+	/*
+	 * reset cpu to full speed, this is needed when enabling cpu frequency
+	 * scalling
+	 */
+	LOONGSON_CHIPCFG0 |= 0x7;
+
+	/* sending an reset signal to EC(embedded controller) */
+	writeb(REG_RESET_HIGH,
+	       (u8 *) (mips_io_port_base + EC_RESET_IO_PORT_HIGH));
+	writeb(REG_RESET_LOW,
+	       (u8 *) (mips_io_port_base + EC_RESET_IO_PORT_LOW));
+	mmiowb();
+	writeb(BIT_RESET_ON,
+	       (u8 *) (mips_io_port_base + EC_RESET_IO_PORT_DATA));
+	mmiowb();
+}
+
+void mach_prepare_shutdown(void)
+{
+	const char *system_type = get_system_type();
+
+	if (strstr(system_type, "8.9inch") != NULL) {
+		/* cpu-gpio0 output low */
+		LOONGSON_GPIODATA &= ~0x00000001;
+		/* cpu-gpio0 as output */
+		LOONGSON_GPIOIE &= ~0x00000001;
+	} else if (strstr(system_type, "7inch") != NULL) {
+		u8 val;
+		u64 i;
+
+		writeb(REG_SHUTDOWN_HIGH,
+		       (u8 *) (mips_io_port_base + EC_SHUTDOWN_IO_PORT_HIGH));
+		writeb(REG_SHUTDOWN_LOW,
+		       (u8 *) (mips_io_port_base + EC_SHUTDOWN_IO_PORT_LOW));
+		mmiowb();
+		val =
+		    readb((u8 *) (mips_io_port_base +
+				  EC_SHUTDOWN_IO_PORT_DATA));
+		writeb(val & (~BIT_SHUTDOWN_ON),
+		       (u8 *) (mips_io_port_base + EC_SHUTDOWN_IO_PORT_DATA));
+		mmiowb();
+		/* need enough wait here... how many microseconds needs? */
+		for (i = 0; i < 0x10000; i++)
+			delay();
+		writeb(val | BIT_SHUTDOWN_ON,
+		       (u8 *) (mips_io_port_base + EC_SHUTDOWN_IO_PORT_DATA));
+		mmiowb();
+	} else
+		printk(KERN_INFO "you can shutdown the power safely now!\n");
+}
diff -Nur linux-2.6.30.orig/arch/mips/Makefile linux-2.6.30/arch/mips/Makefile
--- linux-2.6.30.orig/arch/mips/Makefile	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -120,7 +120,14 @@
 cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
 cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2)	+= -march=r4600 -Wa,--trap
+
+# only gcc >= 4.4 have the loongson-specific support
+cflags-$(CONFIG_CPU_LOONGSON2)	+= -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2E) += \
+	$(call cc-option,-march=loongson2e,-march=r4600) $(call cc-option,-mtune=loongson2e)
+cflags-$(CONFIG_CPU_LOONGSON2F) += \
+	$(call cc-option,-march=loongson2f,-march=r4600) $(call cc-optoin,-mtune=loongson2f)
+
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
@@ -307,9 +314,12 @@
 #
 # lemote fulong mini-PC board
 #
-core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/
-load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
-cflags-$(CONFIG_LEMOTE_FULONG) += -I$(srctree)/arch/mips/include/asm/mach-lemote
+core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
+cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
+					-mno-branch-likely
+load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
+load-$(CONFIG_LEMOTE_FULOONG2F) +=0xffffffff80200000
+load-$(CONFIG_LEMOTE_YEELOONG2F) +=0xffffffff80200000
 
 #
 # MIPS Malta board
@@ -675,6 +685,9 @@
 
 drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 
+# suspend and hibernation support
+drivers-$(CONFIG_PM)	+= arch/mips/power/
+
 ifdef CONFIG_LASAT
 rom.bin rom.sw: vmlinux
 	$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
diff -Nur linux-2.6.30.orig/arch/mips/oprofile/common.c linux-2.6.30/arch/mips/oprofile/common.c
--- linux-2.6.30.orig/arch/mips/oprofile/common.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/oprofile/common.c	2009-06-14 20:25:19.000000000 +0200
@@ -16,6 +16,7 @@
 
 extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
 extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));
+extern struct op_mips_model op_model_loongson2_ops __attribute__((weak));
 
 static struct op_mips_model *model;
 
@@ -93,6 +94,10 @@
 	case CPU_RM9000:
 		lmodel = &op_model_rm9000_ops;
 		break;
+
+	case CPU_LOONGSON2:
+		lmodel = &op_model_loongson2_ops;
+		break;
 	};
 
 	if (!lmodel)
diff -Nur linux-2.6.30.orig/arch/mips/oprofile/Makefile linux-2.6.30/arch/mips/oprofile/Makefile
--- linux-2.6.30.orig/arch/mips/oprofile/Makefile	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/oprofile/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -15,3 +15,4 @@
 oprofile-$(CONFIG_CPU_R10000)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_SB1)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_RM9000)		+= op_model_rm9000.o
+oprofile-$(CONFIG_CPU_LOONGSON2)  	+= op_model_loongson2.o
diff -Nur linux-2.6.30.orig/arch/mips/oprofile/op_model_loongson2.c linux-2.6.30/arch/mips/oprofile/op_model_loongson2.c
--- linux-2.6.30.orig/arch/mips/oprofile/op_model_loongson2.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/oprofile/op_model_loongson2.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,186 @@
+/*
+ * Loongson2 performance counter driver for oprofile
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua <yanh@lemote.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+
+#include <irq.h>
+#include <loongson.h>			/* LOONGSON_PERFCNT_IRQ */
+#include "op_impl.h"
+
+/*
+ * a patch should be sent to oprofile with the loongson-specific support.
+ * otherwise, the oprofile tool will not recognize this and complain about
+ * "cpu_type 'unset' is not valid".
+ */
+#define LOONGSON_CPU_TYPE	"mips/loongson2"
+
+#define LOONGSON_COUNTER1_EVENT(event)	((event & 0x0f) << 5)
+#define LOONGSON_COUNTER2_EVENT(event)	((event & 0x0f) << 9)
+
+#define LOONGSON_PERFCNT_EXL		(1UL	<<  0)
+#define LOONGSON_PERFCNT_KERNEL		(1UL    <<  1)
+#define LOONGSON_PERFCNT_SUPERVISOR	(1UL    <<  2)
+#define LOONGSON_PERFCNT_USER		(1UL    <<  3)
+#define LOONGSON_PERFCNT_INT_EN		(1UL    <<  4)
+#define LOONGSON_PERFCNT_OVERFLOW	(1ULL   << 31)
+
+/* Loongson2 performance counter register */
+#define read_c0_perflo() __read_64bit_c0_register($24, 0)
+#define write_c0_perflo(val) __write_64bit_c0_register($24, 0, val)
+#define read_c0_perfhi() __read_64bit_c0_register($25, 0)
+#define write_c0_perfhi(val) __write_64bit_c0_register($25, 0, val)
+
+static struct loongson2_register_config {
+	unsigned int ctrl;
+	unsigned long long reset_counter1;
+	unsigned long long reset_counter2;
+	int cnt1_enable, cnt2_enable;
+} reg;
+
+DEFINE_SPINLOCK(sample_lock);
+
+static char *oprofid = "LoongsonPerf";
+static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
+/* Compute all of the registers in preparation for enabling profiling.  */
+
+static void loongson2_reg_setup(struct op_counter_config *cfg)
+{
+	unsigned int ctrl = 0;
+
+	reg.reset_counter1 = 0;
+	reg.reset_counter2 = 0;
+	/* Compute the performance counter ctrl word.  */
+	/* For now count kernel and user mode */
+	if (cfg[0].enabled) {
+		ctrl |= LOONGSON_COUNTER1_EVENT(cfg[0].event) |
+		    LOONGSON_PERFCNT_INT_EN;
+		if (cfg[0].kernel)
+			ctrl |= LOONGSON_PERFCNT_KERNEL;
+		if (cfg[0].user)
+			ctrl |= LOONGSON_PERFCNT_USER;
+		reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
+	}
+
+	if (cfg[1].enabled) {
+		ctrl |= LOONGSON_COUNTER2_EVENT(cfg[1].event) |
+		    LOONGSON_PERFCNT_INT_EN;
+		if (cfg[1].kernel)
+			ctrl |= LOONGSON_PERFCNT_KERNEL;
+		if (cfg[1].user)
+			ctrl |= LOONGSON_PERFCNT_USER;
+		reg.reset_counter2 = (0x80000000ULL - cfg[1].count);
+	}
+
+	if (cfg[0].enabled || cfg[1].enabled)
+		ctrl |= LOONGSON_PERFCNT_EXL;
+
+	reg.ctrl = ctrl;
+
+	reg.cnt1_enable = cfg[0].enabled;
+	reg.cnt2_enable = cfg[1].enabled;
+
+}
+
+/* Program all of the registers in preparation for enabling profiling.  */
+
+static void loongson2_cpu_setup(void *args)
+{
+	uint64_t perfcount;
+
+	perfcount = (reg.reset_counter2 << 32) | reg.reset_counter1;
+	write_c0_perfhi(perfcount);
+}
+
+static void loongson2_cpu_start(void *args)
+{
+	/* Start all counters on current CPU */
+	if (reg.cnt1_enable || reg.cnt2_enable)
+		write_c0_perflo(reg.ctrl);
+}
+
+static void loongson2_cpu_stop(void *args)
+{
+	/* Stop all counters on current CPU */
+	write_c0_perflo(0);
+	memset(&reg, 0, sizeof(reg));
+}
+
+static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
+{
+	uint64_t counter, counter1, counter2;
+	struct pt_regs *regs = get_irq_regs();
+	int enabled;
+	unsigned long flags;
+
+	/*
+	 * LOONGSON2 defines two 32-bit performance counters.
+	 * To avoid a race updating the registers we need to stop the counters
+	 * while we're messing with
+	 * them ...
+	 */
+
+	/* Check whether the irq belongs to me */
+	enabled = reg.cnt1_enable | reg.cnt2_enable;
+	if (!enabled)
+		return IRQ_NONE;
+
+	counter = read_c0_perfhi();
+	counter1 = counter & 0xffffffff;
+	counter2 = counter >> 32;
+
+	spin_lock_irqsave(&sample_lock, flags);
+
+	if (counter1 & LOONGSON_PERFCNT_OVERFLOW) {
+		if (reg.cnt1_enable)
+			oprofile_add_sample(regs, 0);
+		counter1 = reg.reset_counter1;
+	}
+	if (counter2 & LOONGSON_PERFCNT_OVERFLOW) {
+		if (reg.cnt2_enable)
+			oprofile_add_sample(regs, 1);
+		counter2 = reg.reset_counter2;
+	}
+
+	spin_unlock_irqrestore(&sample_lock, flags);
+
+	write_c0_perfhi((counter2 << 32) | counter1);
+
+	return IRQ_HANDLED;
+}
+
+static int __init loongson2_init(void)
+{
+	return request_irq(LOONGSON_PERFCNT_IRQ, loongson2_perfcount_handler,
+			   IRQF_SHARED, "Perfcounter", oprofid);
+}
+
+static void loongson2_exit(void)
+{
+	write_c0_perflo(0);
+	free_irq(LOONGSON_PERFCNT_IRQ, oprofid);
+}
+
+struct op_mips_model op_model_loongson2_ops = {
+	.reg_setup = loongson2_reg_setup,
+	.cpu_setup = loongson2_cpu_setup,
+	.init = loongson2_init,
+	.exit = loongson2_exit,
+	.cpu_start = loongson2_cpu_start,
+	.cpu_stop = loongson2_cpu_stop,
+	.cpu_type = LOONGSON_CPU_TYPE,
+	.num_counters = 2
+};
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-au1000.c linux-2.6.30/arch/mips/pci/fixup-au1000.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-au1000.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-au1000.c	2009-06-14 20:25:19.000000000 +0200
@@ -31,7 +31,7 @@
 
 extern char irq_tab_alchemy[][5];
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return irq_tab_alchemy[slot][pin];
 }
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-capcella.c linux-2.6.30/arch/mips/pci/fixup-capcella.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-capcella.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-capcella.c	2009-06-14 20:25:19.000000000 +0200
@@ -38,7 +38,7 @@
  [14] = { -1, INTA, INTB, INTC, INTD }
 };
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return irq_tab_capcella[slot][pin];
 }
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-cobalt.c linux-2.6.30/arch/mips/pci/fixup-cobalt.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-cobalt.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-cobalt.c	2009-06-14 20:25:19.000000000 +0200
@@ -175,7 +175,7 @@
   [COBALT_PCICONF_ETH1]    = ETH1_IRQ
 };
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
 		return irq_tab_qube1[slot];
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-emma2rh.c linux-2.6.30/arch/mips/pci/fixup-emma2rh.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-emma2rh.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-emma2rh.c	2009-06-14 20:25:19.000000000 +0200
@@ -88,7 +88,7 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH,
 			 emma2rh_pci_host_fixup);
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return irq_map[slot][pin];
 }
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-excite.c linux-2.6.30/arch/mips/pci/fixup-excite.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-excite.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-excite.c	2009-06-14 20:25:19.000000000 +0200
@@ -21,7 +21,7 @@
 #include <linux/pci.h>
 #include <excite.h>
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (pin == 0)
 		return -1;
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-fuloong2e.c linux-2.6.30/arch/mips/pci/fixup-fuloong2e.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-fuloong2e.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/pci/fixup-fuloong2e.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,243 @@
+/*
+ * fixup-fuloong2e.c
+ *
+ * Copyright (C) 2004 ICT CAS
+ * Author: Li xiaoyu, ICT CAS
+ *   lixy@ict.ac.cn
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <loongson.h>
+
+/* South bridge slot number is set by the pci probe process */
+static u8 sb_slot = 5;
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = 0;
+
+	if (slot == sb_slot) {
+		switch (PCI_FUNC(dev->devfn)) {
+		case 2:
+			irq = 10;
+			break;
+		case 3:
+			irq = 11;
+			break;
+		case 5:
+			irq = 9;
+			break;
+		}
+	} else {
+		irq = LOONGSON_IRQ_BASE + 25 + pin;
+	}
+	return irq;
+
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static void __init fuloong2e_nec_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	/* Configues port 1, 2, 3, 4 to be validate*/
+	pci_read_config_dword(pdev, 0xe0, &val);
+	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
+
+	/* System clock is 48-MHz Oscillator. */
+	pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+
+static void __init fuloong2e_686b_func0_fixup(struct pci_dev *pdev)
+{
+	unsigned char c;
+
+	sb_slot = PCI_SLOT(pdev->devfn);
+
+	printk(KERN_INFO "via686b fix: ISA bridge\n");
+
+	/*  Enable I/O Recovery time */
+	pci_write_config_byte(pdev, 0x40, 0x08);
+
+	/*  Enable ISA refresh */
+	pci_write_config_byte(pdev, 0x41, 0x01);
+
+	/*  disable ISA line buffer */
+	pci_write_config_byte(pdev, 0x45, 0x00);
+
+	/*  Gate INTR, and flush line buffer */
+	pci_write_config_byte(pdev, 0x46, 0xe0);
+
+	/*  Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */
+	/* pci_write_config_byte(pdev, 0x47, 0x20); */
+
+	/*
+	 *  enable PCI Delay Transaction, Enable EISA ports 4D0/4D1.
+	 *  enable time-out timer
+	 */
+	pci_write_config_byte(pdev, 0x47, 0xe6);
+
+	/*
+	 * enable level trigger on pci irqs: 9,10,11,13
+	 * important! without this PCI interrupts won't work
+	 */
+	outb(0x2e, 0x4d1);
+
+	/*  512 K PCI Decode */
+	pci_write_config_byte(pdev, 0x48, 0x01);
+
+	/*  Wait for PGNT before grant to ISA Master/DMA */
+	pci_write_config_byte(pdev, 0x4a, 0x84);
+
+	/*
+	 * Plug'n'Play
+	 *
+	 *  Parallel DRQ 3, Floppy DRQ 2 (default)
+	 */
+	pci_write_config_byte(pdev, 0x50, 0x0e);
+
+	/*
+	 * IRQ Routing for Floppy and Parallel port
+	 *
+	 *  IRQ 6 for floppy, IRQ 7 for parallel port
+	 */
+	pci_write_config_byte(pdev, 0x51, 0x76);
+
+	/* IRQ Routing for serial ports (take IRQ 3 and 4) */
+	pci_write_config_byte(pdev, 0x52, 0x34);
+
+	/*  All IRQ's level triggered. */
+	pci_write_config_byte(pdev, 0x54, 0x00);
+
+	/* route PIRQA-D irq */
+	pci_write_config_byte(pdev, 0x55, 0x90);	/* bit 7-4, PIRQA */
+	pci_write_config_byte(pdev, 0x56, 0xba);	/* bit 7-4, PIRQC; */
+							/* 3-0, PIRQB */
+	pci_write_config_byte(pdev, 0x57, 0xd0);	/* bit 7-4, PIRQD */
+
+	/* enable function 5/6, audio/modem */
+	pci_read_config_byte(pdev, 0x85, &c);
+	c &= ~(0x3 << 2);
+	pci_write_config_byte(pdev, 0x85, c);
+
+	printk(KERN_INFO"via686b fix: ISA bridge done\n");
+}
+
+static void __init fuloong2e_686b_func1_fixup(struct pci_dev *pdev)
+{
+	printk(KERN_INFO"via686b fix: IDE\n");
+
+	/* Modify IDE controller setup */
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48);
+	pci_write_config_byte(pdev, PCI_COMMAND,
+			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+			      PCI_COMMAND_MASTER);
+	pci_write_config_byte(pdev, 0x40, 0x0b);
+	/* legacy mode */
+	pci_write_config_byte(pdev, 0x42, 0x09);
+
+#if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */
+	/* disable read prefetch/write post buffers */
+	pci_write_config_byte(pdev, 0x41, 0x02);
+
+	/* use 3/4 as fifo thresh hold  */
+	pci_write_config_byte(pdev, 0x43, 0x0a);
+	pci_write_config_byte(pdev, 0x44, 0x00);
+
+	pci_write_config_byte(pdev, 0x45, 0x00);
+#else
+	pci_write_config_byte(pdev, 0x41, 0xc2);
+	pci_write_config_byte(pdev, 0x43, 0x35);
+	pci_write_config_byte(pdev, 0x44, 0x1c);
+
+	pci_write_config_byte(pdev, 0x45, 0x10);
+#endif
+
+	printk(KERN_INFO"via686b fix: IDE done\n");
+}
+
+static void __init fuloong2e_686b_func2_fixup(struct pci_dev *pdev)
+{
+	/* irq routing */
+	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
+}
+
+static void __init fuloong2e_686b_func3_fixup(struct pci_dev *pdev)
+{
+	/* irq routing */
+	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
+}
+
+static void __init fuloong2e_686b_func5_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+	unsigned char c;
+
+	/* enable IO */
+	pci_write_config_byte(pdev, PCI_COMMAND,
+			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+			      PCI_COMMAND_MASTER);
+	pci_read_config_dword(pdev, 0x4, &val);
+	pci_write_config_dword(pdev, 0x4, val | 1);
+
+	/* route ac97 IRQ */
+	pci_write_config_byte(pdev, 0x3c, 9);
+
+	pci_read_config_byte(pdev, 0x8, &c);
+
+	/* link control: enable link & SGD PCM output */
+	pci_write_config_byte(pdev, 0x41, 0xcc);
+
+	/* disable game port, FM, midi, sb, enable write to reg2c-2f */
+	pci_write_config_byte(pdev, 0x42, 0x20);
+
+	/* we are using Avance logic codec */
+	pci_write_config_word(pdev, 0x2c, 0x1005);
+	pci_write_config_word(pdev, 0x2e, 0x4710);
+	pci_read_config_dword(pdev, 0x2c, &val);
+
+	pci_write_config_byte(pdev, 0x42, 0x0);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
+			 fuloong2e_686b_func0_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
+			 fuloong2e_686b_func1_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
+			 fuloong2e_686b_func2_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
+			 fuloong2e_686b_func3_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
+			 fuloong2e_686b_func5_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+			 fuloong2e_nec_fixup);
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-ip32.c linux-2.6.30/arch/mips/pci/fixup-ip32.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-ip32.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-ip32.c	2009-06-14 20:25:19.000000000 +0200
@@ -39,7 +39,7 @@
  * irqs.  I suppose a device without a pin A will thank us for doing it
  * right if there exists such a broken piece of crap.
  */
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return irq_tab_mace[slot][pin];
 }
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-jmr3927.c linux-2.6.30/arch/mips/pci/fixup-jmr3927.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-jmr3927.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-jmr3927.c	2009-06-14 20:25:19.000000000 +0200
@@ -31,7 +31,7 @@
 #include <asm/txx9/pci.h>
 #include <asm/txx9/jmr3927.h>
 
-int __init jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init jmr3927_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char irq = pin;
 
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-lemote2f.c linux-2.6.30/arch/mips/pci/fixup-lemote2f.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-lemote2f.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/pci/fixup-lemote2f.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2008 Lemote Technology
+ * Copyright (C) 2004 ICT CAS
+ * Author: Li xiaoyu, lixy@ict.ac.cn
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <loongson.h>
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/* PCI interrupt pins
+ *
+ * These should not be changed, or you should consider loongson2f interrupt
+ * register and your pci card dispatch
+ */
+
+#define PCIA		4
+#define PCIB		5
+#define PCIC		6
+#define PCID		7
+
+/* all the pci device has the PCIA pin, check the datasheet. */
+static char irq_tab[][5] __initdata = {
+	/*      INTA    INTB    INTC    INTD */
+	{0, 0, 0, 0, 0},	/*  11: Unused */
+	{0, 0, 0, 0, 0},	/*  12: Unused */
+	{0, 0, 0, 0, 0},	/*  13: Unused */
+	{0, 0, 0, 0, 0},	/*  14: Unused */
+	{0, 0, 0, 0, 0},	/*  15: Unused */
+	{0, 0, 0, 0, 0},	/*  16: Unused */
+	{0, PCIA, 0, 0, 0},	/*  17: RTL8110-0 */
+	{0, PCIB, 0, 0, 0},	/*  18: RTL8110-1 */
+	{0, PCIC, 0, 0, 0},	/*  19: SiI3114 */
+	{0, PCID, 0, 0, 0},	/*  20: 3-ports nec usb */
+	{0, PCIA, PCIB, PCIC, PCID},	/*  21: PCI-SLOT */
+	{0, 0, 0, 0, 0},	/*  22: Unused */
+	{0, 0, 0, 0, 0},	/*  23: Unused */
+	{0, 0, 0, 0, 0},	/*  24: Unused */
+	{0, 0, 0, 0, 0},	/*  25: Unused */
+	{0, 0, 0, 0, 0},	/*  26: Unused */
+	{0, 0, 0, 0, 0},	/*  27: Unused */
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int virq;
+
+	if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536)
+	    && (PCI_SLOT(dev->devfn) < 32)) {
+		virq = irq_tab[slot][pin];
+		printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin,
+		       virq + LOONGSON_IRQ_BASE);
+		if (virq != 0)
+			return LOONGSON_IRQ_BASE + virq;
+		else
+			return 0;
+	} else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) {	/*  cs5536 */
+		switch (PCI_FUNC(dev->devfn)) {
+		case 2:
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+					      CS5536_IDE_INTR);
+			return 14;	/*  for IDE */
+		case 3:
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+					      CS5536_ACC_INTR);
+			return 9;	/*  for AUDIO */
+		case 4:	/*  for OHCI */
+		case 5:	/*  for EHCI */
+		case 6:	/*  for UDC */
+		case 7:	/*  for OTG */
+			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+					      CS5536_USB_INTR);
+			return 11;
+		}
+		return dev->irq;
+	} else {
+		printk(KERN_INFO " strange pci slot number.\n");
+		return 0;
+	}
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+/* CS5536 SPEC. fixup */
+static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
+{
+	/* the uart1 and uart2 interrupt in PIC is enabled as default */
+	pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
+	pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
+	return;
+}
+
+static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
+{
+	/* setting the mutex pin as IDE function */
+	pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
+			       CS5536_IDE_FLASH_SIGNATURE);
+	return;
+}
+
+static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
+{
+	u8 val;
+
+	/* enable the AUDIO interrupt in PIC  */
+	pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
+
+#if 1
+	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &val);
+	printk(KERN_INFO "cs5536 acc latency 0x%x\n", val);
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
+#endif
+	return;
+}
+
+static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
+{
+	/* enable the OHCI interrupt in PIC */
+	/* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
+	pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
+	return;
+}
+
+static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
+{
+	u32 hi, lo;
+
+	/* Serial short detect enable */
+	_rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo);
+	_wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo);
+
+	/* setting the USB2.0 micro frame length */
+	pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
+	return;
+}
+
+static void __init loongson_nec_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	pci_read_config_dword(pdev, 0xe0, &val);
+	/* Only 2 port be used */
+	pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
+			 loongson_cs5536_isa_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC,
+			 loongson_cs5536_ohci_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC,
+			 loongson_cs5536_ehci_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO,
+			 loongson_cs5536_acc_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE,
+			 loongson_cs5536_ide_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+			 loongson_nec_fixup);
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-lm2e.c linux-2.6.30/arch/mips/pci/fixup-lm2e.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-lm2e.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-lm2e.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,242 +0,0 @@
-/*
- * fixup-lm2e.c
- *
- * Copyright (C) 2004 ICT CAS
- * Author: Li xiaoyu, ICT CAS
- *   lixy@ict.ac.cn
- *
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/mips-boards/bonito64.h>
-
-/* South bridge slot number is set by the pci probe process */
-static u8 sb_slot = 5;
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq = 0;
-
-	if (slot == sb_slot) {
-		switch (PCI_FUNC(dev->devfn)) {
-		case 2:
-			irq = 10;
-			break;
-		case 3:
-			irq = 11;
-			break;
-		case 5:
-			irq = 9;
-			break;
-		}
-	} else {
-		irq = BONITO_IRQ_BASE + 25 + pin;
-	}
-	return irq;
-
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
-{
-	unsigned int val;
-
-	/* Configues port 1, 2, 3, 4 to be validate*/
-	pci_read_config_dword(pdev, 0xe0, &val);
-	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
-
-	/* System clock is 48-MHz Oscillator. */
-	pci_write_config_dword(pdev, 0xe4, 1 << 5);
-}
-
-static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
-{
-	unsigned char c;
-
-	sb_slot = PCI_SLOT(pdev->devfn);
-
-	printk(KERN_INFO "via686b fix: ISA bridge\n");
-
-	/*  Enable I/O Recovery time */
-	pci_write_config_byte(pdev, 0x40, 0x08);
-
-	/*  Enable ISA refresh */
-	pci_write_config_byte(pdev, 0x41, 0x01);
-
-	/*  disable ISA line buffer */
-	pci_write_config_byte(pdev, 0x45, 0x00);
-
-	/*  Gate INTR, and flush line buffer */
-	pci_write_config_byte(pdev, 0x46, 0xe0);
-
-	/*  Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */
-	/* pci_write_config_byte(pdev, 0x47, 0x20); */
-
-	/*
-	 *  enable PCI Delay Transaction, Enable EISA ports 4D0/4D1.
-	 *  enable time-out timer
-	 */
-	pci_write_config_byte(pdev, 0x47, 0xe6);
-
-	/*
-	 * enable level trigger on pci irqs: 9,10,11,13
-	 * important! without this PCI interrupts won't work
-	 */
-	outb(0x2e, 0x4d1);
-
-	/*  512 K PCI Decode */
-	pci_write_config_byte(pdev, 0x48, 0x01);
-
-	/*  Wait for PGNT before grant to ISA Master/DMA */
-	pci_write_config_byte(pdev, 0x4a, 0x84);
-
-	/*
-	 * Plug'n'Play
-	 *
-	 *  Parallel DRQ 3, Floppy DRQ 2 (default)
-	 */
-	pci_write_config_byte(pdev, 0x50, 0x0e);
-
-	/*
-	 * IRQ Routing for Floppy and Parallel port
-	 *
-	 *  IRQ 6 for floppy, IRQ 7 for parallel port
-	 */
-	pci_write_config_byte(pdev, 0x51, 0x76);
-
-	/* IRQ Routing for serial ports (take IRQ 3 and 4) */
-	pci_write_config_byte(pdev, 0x52, 0x34);
-
-	/*  All IRQ's level triggered. */
-	pci_write_config_byte(pdev, 0x54, 0x00);
-
-	/* route PIRQA-D irq */
-	pci_write_config_byte(pdev, 0x55, 0x90);	/* bit 7-4, PIRQA */
-	pci_write_config_byte(pdev, 0x56, 0xba);	/* bit 7-4, PIRQC; */
-							/* 3-0, PIRQB */
-	pci_write_config_byte(pdev, 0x57, 0xd0);	/* bit 7-4, PIRQD */
-
-	/* enable function 5/6, audio/modem */
-	pci_read_config_byte(pdev, 0x85, &c);
-	c &= ~(0x3 << 2);
-	pci_write_config_byte(pdev, 0x85, c);
-
-	printk(KERN_INFO"via686b fix: ISA bridge done\n");
-}
-
-static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
-{
-	printk(KERN_INFO"via686b fix: IDE\n");
-
-	/* Modify IDE controller setup */
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48);
-	pci_write_config_byte(pdev, PCI_COMMAND,
-			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-			      PCI_COMMAND_MASTER);
-	pci_write_config_byte(pdev, 0x40, 0x0b);
-	/* legacy mode */
-	pci_write_config_byte(pdev, 0x42, 0x09);
-
-#if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */
-	/* disable read prefetch/write post buffers */
-	pci_write_config_byte(pdev, 0x41, 0x02);
-
-	/* use 3/4 as fifo thresh hold  */
-	pci_write_config_byte(pdev, 0x43, 0x0a);
-	pci_write_config_byte(pdev, 0x44, 0x00);
-
-	pci_write_config_byte(pdev, 0x45, 0x00);
-#else
-	pci_write_config_byte(pdev, 0x41, 0xc2);
-	pci_write_config_byte(pdev, 0x43, 0x35);
-	pci_write_config_byte(pdev, 0x44, 0x1c);
-
-	pci_write_config_byte(pdev, 0x45, 0x10);
-#endif
-
-	printk(KERN_INFO"via686b fix: IDE done\n");
-}
-
-static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
-{
-	/* irq routing */
-	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
-}
-
-static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
-{
-	/* irq routing */
-	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
-}
-
-static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
-{
-	unsigned int val;
-	unsigned char c;
-
-	/* enable IO */
-	pci_write_config_byte(pdev, PCI_COMMAND,
-			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-			      PCI_COMMAND_MASTER);
-	pci_read_config_dword(pdev, 0x4, &val);
-	pci_write_config_dword(pdev, 0x4, val | 1);
-
-	/* route ac97 IRQ */
-	pci_write_config_byte(pdev, 0x3c, 9);
-
-	pci_read_config_byte(pdev, 0x8, &c);
-
-	/* link control: enable link & SGD PCM output */
-	pci_write_config_byte(pdev, 0x41, 0xcc);
-
-	/* disable game port, FM, midi, sb, enable write to reg2c-2f */
-	pci_write_config_byte(pdev, 0x42, 0x20);
-
-	/* we are using Avance logic codec */
-	pci_write_config_word(pdev, 0x2c, 0x1005);
-	pci_write_config_word(pdev, 0x2e, 0x4710);
-	pci_read_config_dword(pdev, 0x2c, &val);
-
-	pci_write_config_byte(pdev, 0x42, 0x0);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
-			 loongson2e_686b_func0_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
-			 loongson2e_686b_func1_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
-			 loongson2e_686b_func2_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
-			 loongson2e_686b_func3_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
-			 loongson2e_686b_func5_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
-			 loongson2e_nec_fixup);
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-malta.c linux-2.6.30/arch/mips/pci/fixup-malta.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-malta.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-malta.c	2009-06-14 20:25:19.000000000 +0200
@@ -36,7 +36,7 @@
 	{0,	PCID,	PCIA,	PCIB,	PCIC }	/* 21: PCI Slot 4 */
 };
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int virq;
 	virq = irq_tab[slot][pin];
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-mpc30x.c linux-2.6.30/arch/mips/pci/fixup-mpc30x.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-mpc30x.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-mpc30x.c	2009-06-14 20:25:19.000000000 +0200
@@ -34,7 +34,7 @@
  [29] = MQ200_IRQ,
 };
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (slot == 30)
 		return internal_func_irqs[PCI_FUNC(dev->devfn)];
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-pmcmsp.c linux-2.6.30/arch/mips/pci/fixup-pmcmsp.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-pmcmsp.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-pmcmsp.c	2009-06-14 20:25:19.000000000 +0200
@@ -202,7 +202,7 @@
  *  RETURNS:     IRQ number
  *
  ****************************************************************************/
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 #if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL)
 	printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n");
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-pnx8550.c linux-2.6.30/arch/mips/pci/fixup-pnx8550.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-pnx8550.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-pnx8550.c	2009-06-14 20:25:19.000000000 +0200
@@ -45,7 +45,7 @@
 	/* nothing to do here */
 }
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return pnx8550_irq_tab[slot][pin];
 }
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-rbtx4927.c linux-2.6.30/arch/mips/pci/fixup-rbtx4927.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-rbtx4927.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-rbtx4927.c	2009-06-14 20:25:19.000000000 +0200
@@ -36,7 +36,7 @@
 #include <asm/txx9/pci.h>
 #include <asm/txx9/rbtx4927.h>
 
-int __init rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init rbtx4927_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char irq = pin;
 
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-rbtx4938.c linux-2.6.30/arch/mips/pci/fixup-rbtx4938.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-rbtx4938.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-rbtx4938.c	2009-06-14 20:25:19.000000000 +0200
@@ -13,7 +13,7 @@
 #include <asm/txx9/pci.h>
 #include <asm/txx9/rbtx4938.h>
 
-int __init rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init rbtx4938_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq = tx4938_pcic1_map_irq(dev, slot);
 
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-rc32434.c linux-2.6.30/arch/mips/pci/fixup-rc32434.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-rc32434.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-rc32434.c	2009-06-14 20:25:19.000000000 +0200
@@ -37,7 +37,7 @@
 	{0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3}
 };
 
-int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq = 0;
 
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-sni.c linux-2.6.30/arch/mips/pci/fixup-sni.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-sni.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-sni.c	2009-06-14 20:25:19.000000000 +0200
@@ -130,7 +130,7 @@
 	return (csmsr & 0xa0) == 0x20;
 }
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch (sni_brd_type) {
 	case SNI_BRD_PCI_TOWER_CPLUS:
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-tb0219.c linux-2.6.30/arch/mips/pci/fixup-tb0219.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-tb0219.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-tb0219.c	2009-06-14 20:25:19.000000000 +0200
@@ -23,7 +23,7 @@
 
 #include <asm/vr41xx/tb0219.h>
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq = -1;
 
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-tb0226.c linux-2.6.30/arch/mips/pci/fixup-tb0226.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-tb0226.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-tb0226.c	2009-06-14 20:25:19.000000000 +0200
@@ -23,7 +23,7 @@
 #include <asm/vr41xx/giu.h>
 #include <asm/vr41xx/tb0226.h>
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq = -1;
 
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-tb0287.c linux-2.6.30/arch/mips/pci/fixup-tb0287.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-tb0287.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-tb0287.c	2009-06-14 20:25:19.000000000 +0200
@@ -22,7 +22,7 @@
 
 #include <asm/vr41xx/tb0287.h>
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char bus;
 	int irq = -1;
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-wrppmc.c linux-2.6.30/arch/mips/pci/fixup-wrppmc.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-wrppmc.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-wrppmc.c	2009-06-14 20:25:19.000000000 +0200
@@ -25,7 +25,7 @@
 	[6] = {0, WRPPMC_PCI_INTA_IRQ, 0, 0, 0},
 };
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return pci_irq_tab[slot][pin];
 }
diff -Nur linux-2.6.30.orig/arch/mips/pci/fixup-yosemite.c linux-2.6.30/arch/mips/pci/fixup-yosemite.c
--- linux-2.6.30.orig/arch/mips/pci/fixup-yosemite.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/fixup-yosemite.c	2009-06-14 20:25:19.000000000 +0200
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (pin == 0)
 		return -1;
diff -Nur linux-2.6.30.orig/arch/mips/pci/Makefile linux-2.6.30/arch/mips/pci/Makefile
--- linux-2.6.30.orig/arch/mips/pci/Makefile	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -26,7 +26,9 @@
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
-obj-$(CONFIG_LEMOTE_FULONG)	+= fixup-lm2e.o ops-bonito64.o
+obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-loongson2.o
+obj-$(CONFIG_LEMOTE_FULOONG2F)	+= fixup-lemote2f.o ops-loongson2.o
+obj-$(CONFIG_LEMOTE_YEELOONG2F)	+= fixup-lemote2f.o ops-loongson2.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_PMC_MSP7120_GW)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_EVAL)	+= fixup-pmcmsp.o ops-pmcmsp.o
diff -Nur linux-2.6.30.orig/arch/mips/pci/ops-bonito64.c linux-2.6.30/arch/mips/pci/ops-bonito64.c
--- linux-2.6.30.orig/arch/mips/pci/ops-bonito64.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/ops-bonito64.c	2009-06-14 20:25:19.000000000 +0200
@@ -29,20 +29,16 @@
 #define PCI_ACCESS_READ  0
 #define PCI_ACCESS_WRITE 1
 
-#ifdef CONFIG_LEMOTE_FULONG
-#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset))
-#define ID_SEL_BEGIN 11
-#else
-#define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset))
+#define CFG_SPACE_REG(offset) \
+	(void *)CKSEG1ADDR(_pcictrl_bonito_pcicfg + (offset))
 #define ID_SEL_BEGIN 10
-#endif
 #define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
 
 
 static int bonito64_pcibios_config_access(unsigned char access_type,
 				      struct pci_bus *bus,
 				      unsigned int devfn, int where,
-				      u32 * data)
+				      u32 *data)
 {
 	u32 busnum = bus->number;
 	u32 addr, type;
@@ -77,10 +73,9 @@
 	addrp = CFG_SPACE_REG(addr & 0xffff);
 	if (access_type == PCI_ACCESS_WRITE) {
 		writel(cpu_to_le32(*data), addrp);
-#ifndef CONFIG_LEMOTE_FULONG
 		/* Wait till done */
-		while (BONITO_PCIMSTAT & 0xF);
-#endif
+		while (BONITO_PCIMSTAT & 0xF)
+			;
 	} else {
 		*data = le32_to_cpu(readl(addrp));
 	}
@@ -107,7 +102,7 @@
  * read/write a 32bit word and mask/modify the data we actually want.
  */
 static int bonito64_pcibios_read(struct pci_bus *bus, unsigned int devfn,
-			     int where, int size, u32 * val)
+			     int where, int size, u32 *val)
 {
 	u32 data = 0;
 
@@ -144,7 +139,7 @@
 		data = val;
 	else {
 		if (bonito64_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
-		                               where, &data))
+					where, &data))
 			return -1;
 
 		if (size == 1)
diff -Nur linux-2.6.30.orig/arch/mips/pci/ops-loongson2.c linux-2.6.30/arch/mips/pci/ops-loongson2.c
--- linux-2.6.30.orig/arch/mips/pci/ops-loongson2.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/pci/ops-loongson2.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) 1999, 2000, 2004  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * MIPS boards specific PCI support.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <loongson.h>
+
+#ifdef CONFIG_CS5536
+#include <cs5536/cs5536_pci.h>
+#include <cs5536/cs5536.h>
+#endif
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+#define CFG_SPACE_REG(offset) \
+	(void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset))
+#define ID_SEL_BEGIN 11
+#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
+
+
+static int loongson_pcibios_config_access(unsigned char access_type,
+				      struct pci_bus *bus,
+				      unsigned int devfn, int where,
+				      u32 *data)
+{
+	u32 busnum = bus->number;
+	u32 addr, type;
+	u32 dummy;
+	void *addrp;
+	int device = PCI_SLOT(devfn);
+	int function = PCI_FUNC(devfn);
+	int reg = where & ~3;
+
+	if (busnum == 0) {
+		/* board-specific part,currently,only fuloong2f,yeeloong2f
+		 * use CS5536, fuloong2e use via686b, gdium has no
+		 * south bridge
+		 */
+#ifdef CONFIG_CS5536
+		/* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr()
+		 * to access the regsters 0xf4,0xf8,0xfc, which is bigger than
+		 * 0xf0, so, it will not go this branch, but the others. so,
+		 * no calling dead loop here.
+		 */
+		if ((PCI_IDSEL_CS5536 == device) && (reg < 0xF0)) {
+			switch (access_type) {
+			case PCI_ACCESS_READ:
+				*data = cs5536_pci_conf_read4(function, reg);
+				break;
+			case PCI_ACCESS_WRITE:
+				cs5536_pci_conf_write4(function, reg, *data);
+				break;
+			}
+			return 0;
+		}
+#endif
+		/* Type 0 configuration for onboard PCI bus */
+		if (device > MAX_DEV_NUM)
+			return -1;
+
+		addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg;
+		type = 0;
+	} else {
+		/* Type 1 configuration for offboard PCI bus */
+		addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
+		type = 0x10000;
+	}
+
+	/* Clear aborts */
+	LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \
+				LOONGSON_PCICMD_MTABORT_CLR;
+
+	LOONGSON_PCIMAP_CFG = (addr >> 16) | type;
+
+	/* Flush Bonito register block */
+	dummy = LOONGSON_PCIMAP_CFG;
+	mmiowb();
+
+	addrp = CFG_SPACE_REG(addr & 0xffff);
+	if (access_type == PCI_ACCESS_WRITE)
+		writel(cpu_to_le32(*data), addrp);
+	else
+		*data = le32_to_cpu(readl(addrp));
+
+	/* Detect Master/Target abort */
+	if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR |
+			     LOONGSON_PCICMD_MTABORT_CLR)) {
+		/* Error occurred */
+
+		/* Clear bits */
+		LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR |
+				  LOONGSON_PCICMD_MTABORT_CLR);
+
+		return -1;
+	}
+
+	return 0;
+
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 *val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
+				       &data))
+		return -1;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+			      int where, int size, u32 val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (size == 4)
+		data = val;
+	else {
+		if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+					where, &data))
+			return -1;
+
+		if (size == 1)
+			data = (data & ~(0xff << ((where & 3) << 3))) |
+				(val << ((where & 3) << 3));
+		else if (size == 2)
+			data = (data & ~(0xffff << ((where & 3) << 3))) |
+				(val << ((where & 3) << 3));
+	}
+
+	if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
+				       &data))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops loongson_pci_ops = {
+	.read = loongson_pcibios_read,
+	.write = loongson_pcibios_write
+};
+
+#ifdef CONFIG_CS5536
+void _rdmsr(u32 msr, u32 *hi, u32 *lo)
+{
+	struct pci_bus bus = {
+		.number = PCI_BUS_CS5536
+	};
+	u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+	loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+	loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+	loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_rdmsr);
+
+void _wrmsr(u32 msr, u32 hi, u32 lo)
+{
+	struct pci_bus bus = {
+		.number = PCI_BUS_CS5536
+	};
+	u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+	loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+	loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+	loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_wrmsr);
+#endif
diff -Nur linux-2.6.30.orig/arch/mips/pci/pci-bcm1480.c linux-2.6.30/arch/mips/pci/pci-bcm1480.c
--- linux-2.6.30.orig/arch/mips/pci/pci-bcm1480.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/pci-bcm1480.c	2009-06-14 20:25:19.000000000 +0200
@@ -74,7 +74,7 @@
 	*(u32 *)(cfg_space + (addr & ~3)) = data;
 }
 
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (pin == 0)
 		return -1;
diff -Nur linux-2.6.30.orig/arch/mips/pci/pci-bcm47xx.c linux-2.6.30/arch/mips/pci/pci-bcm47xx.c
--- linux-2.6.30.orig/arch/mips/pci/pci-bcm47xx.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/pci-bcm47xx.c	2009-06-14 20:25:19.000000000 +0200
@@ -26,7 +26,7 @@
 #include <linux/pci.h>
 #include <linux/ssb/ssb.h>
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return 0;
 }
diff -Nur linux-2.6.30.orig/arch/mips/pci/pci-ip27.c linux-2.6.30/arch/mips/pci/pci-ip27.c
--- linux-2.6.30.orig/arch/mips/pci/pci-ip27.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/pci-ip27.c	2009-06-14 20:25:19.000000000 +0200
@@ -141,7 +141,7 @@
  * A given PCI device, in general, should be able to intr any of the cpus
  * on any one of the hubs connected to its xbow.
  */
-int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return 0;
 }
diff -Nur linux-2.6.30.orig/arch/mips/pci/pci-lasat.c linux-2.6.30/arch/mips/pci/pci-lasat.c
--- linux-2.6.30.orig/arch/mips/pci/pci-lasat.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/pci-lasat.c	2009-06-14 20:25:19.000000000 +0200
@@ -61,7 +61,7 @@
 #define LASAT_IRQ_PCIC   (LASAT_IRQ_BASE + 7)
 #define LASAT_IRQ_PCID   (LASAT_IRQ_BASE + 8)
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch (slot) {
 	case 1:
diff -Nur linux-2.6.30.orig/arch/mips/pci/pci-sb1250.c linux-2.6.30/arch/mips/pci/pci-sb1250.c
--- linux-2.6.30.orig/arch/mips/pci/pci-sb1250.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/pci-sb1250.c	2009-06-14 20:25:19.000000000 +0200
@@ -84,7 +84,7 @@
 	*(u32 *) (cfg_space + (addr & ~3)) = data;
 }
 
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return dev->irq;
 }
diff -Nur linux-2.6.30.orig/arch/mips/pci/pci-tx4938.c linux-2.6.30/arch/mips/pci/pci-tx4938.c
--- linux-2.6.30.orig/arch/mips/pci/pci-tx4938.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/pci-tx4938.c	2009-06-14 20:25:19.000000000 +0200
@@ -114,7 +114,7 @@
 	return pciclk;
 }
 
-int __init tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
+int __init tx4938_pcic1_map_irq(struct pci_dev *dev, u8 slot)
 {
 	if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) {
 		switch (slot) {
diff -Nur linux-2.6.30.orig/arch/mips/pci/pci-tx4939.c linux-2.6.30/arch/mips/pci/pci-tx4939.c
--- linux-2.6.30.orig/arch/mips/pci/pci-tx4939.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/pci/pci-tx4939.c	2009-06-14 20:25:19.000000000 +0200
@@ -50,7 +50,7 @@
 		((pciclk + 50000) / 100000) % 10);
 }
 
-int __init tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
+int __init tx4939_pcic1_map_irq(struct pci_dev *dev, u8 slot)
 {
 	if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4939_pcic1ptr) {
 		switch (slot) {
@@ -70,7 +70,7 @@
 	return -1;
 }
 
-int __init tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init tx4939_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq = tx4939_pcic1_map_irq(dev, slot);
 
diff -Nur linux-2.6.30.orig/arch/mips/power/cpu.c linux-2.6.30/arch/mips/power/cpu.c
--- linux-2.6.30.orig/arch/mips/power/cpu.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/power/cpu.c	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,43 @@
+/*
+ * Suspend support for mips.
+ *
+ * Distributed under GPLv2
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Hu Hongbing <huhb@lemote.com>
+ *         Wu Zhangjin <wuzj@lemote.com>
+ */
+#include <asm/suspend.h>
+#include <asm/fpu.h>
+#include <asm/dsp.h>
+
+static u32 saved_status;
+struct pt_regs saved_regs;
+
+void save_processor_state(void)
+{
+	saved_status = read_c0_status();
+
+	if (is_fpu_owner())
+		save_fp(current);
+	if (cpu_has_dsp)
+		save_dsp(current);
+}
+
+void restore_processor_state(void)
+{
+	write_c0_status(saved_status);
+
+	if (is_fpu_owner())
+		restore_fp(current);
+	if (cpu_has_dsp)
+		restore_dsp(current);
+}
+
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long nosave_begin_pfn = PFN_DOWN(__pa(&__nosave_begin));
+	unsigned long nosave_end_pfn = PFN_UP(__pa(&__nosave_end));
+
+	return	(pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
+}
diff -Nur linux-2.6.30.orig/arch/mips/power/hibernate.S linux-2.6.30/arch/mips/power/hibernate.S
--- linux-2.6.30.orig/arch/mips/power/hibernate.S	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/power/hibernate.S	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1,70 @@
+/*
+ * Hibernation support for mips - temporary page tables
+ *
+ * Distributed under GPLv2
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Hu Hongbing <huhb@lemote.com>
+ *         Wu Zhangjin <wuzj@lemote.com>
+ */
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/asm.h>
+
+.text
+LEAF(swsusp_arch_suspend)
+	PTR_LA t0, saved_regs
+	PTR_S ra, PT_R31(t0)
+	PTR_S sp, PT_R29(t0)
+	PTR_S fp, PT_R30(t0)
+	PTR_S gp, PT_R28(t0)
+	PTR_S s0, PT_R16(t0)
+	PTR_S s1, PT_R17(t0)
+	PTR_S s2, PT_R18(t0)
+	PTR_S s3, PT_R19(t0)
+	PTR_S s4, PT_R20(t0)
+	PTR_S s5, PT_R21(t0)
+	PTR_S s6, PT_R22(t0)
+	PTR_S s7, PT_R23(t0)
+	j swsusp_save
+END(swsusp_arch_suspend)
+
+LEAF(swsusp_arch_resume)
+	PTR_L t0, restore_pblist
+0:
+	PTR_L t1, PBE_ADDRESS(t0)   /* source */
+	PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */
+	PTR_ADDIU t3, t1, _PAGE_SIZE
+1:
+	REG_L t8, (t1)
+	REG_S t8, (t2)
+	PTR_ADDIU t1, t1, SZREG
+	PTR_ADDIU t2, t2, SZREG
+	bne t1, t3, 1b
+	PTR_L t0, PBE_NEXT(t0)
+	bnez t0, 0b
+	/* flush caches to make sure context is in memory */
+	PTR_L t0, __flush_cache_all
+	jalr t0
+	/* flush tlb entries */
+#ifdef CONFIG_SMP
+	jal	flush_tlb_all
+#else
+	jal	local_flush_tlb_all
+#endif
+	PTR_LA t0, saved_regs
+	PTR_L ra, PT_R31(t0)
+	PTR_L sp, PT_R29(t0)
+	PTR_L fp, PT_R30(t0)
+	PTR_L gp, PT_R28(t0)
+	PTR_L s0, PT_R16(t0)
+	PTR_L s1, PT_R17(t0)
+	PTR_L s2, PT_R18(t0)
+	PTR_L s3, PT_R19(t0)
+	PTR_L s4, PT_R20(t0)
+	PTR_L s5, PT_R21(t0)
+	PTR_L s6, PT_R22(t0)
+	PTR_L s7, PT_R23(t0)
+	PTR_LI v0, 0x0
+	jr ra
+END(swsusp_arch_resume)
diff -Nur linux-2.6.30.orig/arch/mips/power/Makefile linux-2.6.30/arch/mips/power/Makefile
--- linux-2.6.30.orig/arch/mips/power/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/arch/mips/power/Makefile	2009-06-14 20:25:19.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_HIBERNATION) += cpu.o hibernate.o
diff -Nur linux-2.6.30.orig/arch/mips/sibyte/bcm1480/irq.c linux-2.6.30/arch/mips/sibyte/bcm1480/irq.c
--- linux-2.6.30.orig/arch/mips/sibyte/bcm1480/irq.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/sibyte/bcm1480/irq.c	2009-06-14 20:25:19.000000000 +0200
@@ -116,10 +116,6 @@
 	unsigned long flags;
 	unsigned int irq_dirty;
 
-	if (cpumask_weight(mask) != 1) {
-		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return;
-	}
 	i = cpumask_first(mask);
 
 	/* Convert logical CPU to physical CPU */
diff -Nur linux-2.6.30.orig/arch/mips/sibyte/sb1250/irq.c linux-2.6.30/arch/mips/sibyte/sb1250/irq.c
--- linux-2.6.30.orig/arch/mips/sibyte/sb1250/irq.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/sibyte/sb1250/irq.c	2009-06-14 20:25:19.000000000 +0200
@@ -111,11 +111,6 @@
 
 	i = cpumask_first(mask);
 
-	if (cpumask_weight(mask) > 1) {
-		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return;
-	}
-
 	/* Convert logical CPU to physical CPU */
 	cpu = cpu_logical_map(i);
 
diff -Nur linux-2.6.30.orig/arch/mips/txx9/generic/pci.c linux-2.6.30/arch/mips/txx9/generic/pci.c
--- linux-2.6.30.orig/arch/mips/txx9/generic/pci.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/mips/txx9/generic/pci.c	2009-06-14 20:25:19.000000000 +0200
@@ -382,7 +382,7 @@
 	return 0;
 }
 
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return txx9_board_vec->pci_map_irq(dev, slot, pin);
 }
diff -Nur linux-2.6.30.orig/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c linux-2.6.30/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
--- linux-2.6.30.orig/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c	2009-06-14 20:25:19.000000000 +0200
@@ -550,7 +550,7 @@
 		return -ENOMEM;
 	}
 	for_each_possible_cpu(i) {
-		if (!zalloc_cpumask_var_node(
+		if (!alloc_cpumask_var_node(
 			&per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
 			GFP_KERNEL, cpu_to_node(i))) {
 
diff -Nur linux-2.6.30.orig/arch/x86/kernel/cpu/cpufreq/powernow-k7.c linux-2.6.30/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
--- linux-2.6.30.orig/arch/x86/kernel/cpu/cpufreq/powernow-k7.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/x86/kernel/cpu/cpufreq/powernow-k7.c	2009-06-14 20:25:19.000000000 +0200
@@ -322,7 +322,7 @@
 		goto err0;
 	}
 
-	if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
+	if (!alloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
 								GFP_KERNEL)) {
 		retval = -ENOMEM;
 		goto err05;
diff -Nur linux-2.6.30.orig/arch/x86/kernel/cpu/cpufreq/powernow-k8.c linux-2.6.30/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
--- linux-2.6.30.orig/arch/x86/kernel/cpu/cpufreq/powernow-k8.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/x86/kernel/cpu/cpufreq/powernow-k8.c	2009-06-14 20:25:19.000000000 +0200
@@ -887,7 +887,7 @@
 	/* notify BIOS that we exist */
 	acpi_processor_notify_smm(THIS_MODULE);
 
-	if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
+	if (!alloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
 		printk(KERN_ERR PFX
 				"unable to alloc powernow_k8_data cpumask\n");
 		ret_val = -ENOMEM;
diff -Nur linux-2.6.30.orig/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c linux-2.6.30/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
--- linux-2.6.30.orig/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c	2009-06-14 20:25:19.000000000 +0200
@@ -471,7 +471,7 @@
 
 	if (unlikely(!alloc_cpumask_var(&saved_mask, GFP_KERNEL)))
 		return -ENOMEM;
-	if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) {
+	if (unlikely(!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))) {
 		free_cpumask_var(saved_mask);
 		return -ENOMEM;
 	}
diff -Nur linux-2.6.30.orig/arch/x86/kernel/cpu/mcheck/mce_64.c linux-2.6.30/arch/x86/kernel/cpu/mcheck/mce_64.c
--- linux-2.6.30.orig/arch/x86/kernel/cpu/mcheck/mce_64.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/x86/kernel/cpu/mcheck/mce_64.c	2009-06-14 20:25:19.000000000 +0200
@@ -1163,7 +1163,7 @@
 	if (!mce_available(&boot_cpu_data))
 		return -EIO;
 
-	zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
+	alloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
 
 	err = mce_init_banks();
 	if (err)
diff -Nur linux-2.6.30.orig/arch/x86/kernel/tlb_uv.c linux-2.6.30/arch/x86/kernel/tlb_uv.c
--- linux-2.6.30.orig/arch/x86/kernel/tlb_uv.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/arch/x86/kernel/tlb_uv.c	2009-06-14 20:25:19.000000000 +0200
@@ -832,7 +832,7 @@
 		return 0;
 
 	for_each_possible_cpu(cur_cpu)
-		zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
+		alloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
 				       GFP_KERNEL, cpu_to_node(cur_cpu));
 
 	uv_bau_retry_limit = 1;
diff -Nur linux-2.6.30.orig/block/bsg.c linux-2.6.30/block/bsg.c
--- linux-2.6.30.orig/block/bsg.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/block/bsg.c	2009-06-14 20:25:19.000000000 +0200
@@ -315,7 +315,6 @@
 	blk_put_request(rq);
 	if (next_rq) {
 		blk_rq_unmap_user(next_rq->bio);
-		next_rq->bio = NULL;
 		blk_put_request(next_rq);
 	}
 	return ERR_PTR(ret);
@@ -449,7 +448,6 @@
 		hdr->dout_resid = rq->data_len;
 		hdr->din_resid = rq->next_rq->data_len;
 		blk_rq_unmap_user(bidi_bio);
-		rq->next_rq->bio = NULL;
 		blk_put_request(rq->next_rq);
 	} else if (rq_data_dir(rq) == READ)
 		hdr->din_resid = rq->data_len;
@@ -468,7 +466,6 @@
 	blk_rq_unmap_user(bio);
 	if (rq->cmd != rq->__cmd)
 		kfree(rq->cmd);
-	rq->bio = NULL;
 	blk_put_request(rq);
 
 	return ret;
diff -Nur linux-2.6.30.orig/Documentation/kernel-parameters.txt linux-2.6.30/Documentation/kernel-parameters.txt
--- linux-2.6.30.orig/Documentation/kernel-parameters.txt	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/Documentation/kernel-parameters.txt	2009-06-14 20:25:19.000000000 +0200
@@ -1220,6 +1220,10 @@
 			(machvec) in a generic kernel.
 			Example: machvec=hpzx1_swiotlb
 
+	machtype=	[Loongson] Share the same kernel image file between different
+			 yeeloong laptop.
+			Example: machtype=lemote-yeeloong-2f-7inch
+
 	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater
 			than or equal to this physical address is ignored.
 
diff -Nur linux-2.6.30.orig/drivers/acpi/processor_core.c linux-2.6.30/drivers/acpi/processor_core.c
--- linux-2.6.30.orig/drivers/acpi/processor_core.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/acpi/processor_core.c	2009-06-14 20:25:19.000000000 +0200
@@ -844,7 +844,7 @@
 	if (!pr)
 		return -ENOMEM;
 
-	if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+	if (!alloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
 		kfree(pr);
 		return -ENOMEM;
 	}
diff -Nur linux-2.6.30.orig/drivers/char/mxser.c linux-2.6.30/drivers/char/mxser.c
--- linux-2.6.30.orig/drivers/char/mxser.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/char/mxser.c	2009-06-14 20:25:19.000000000 +0200
@@ -2711,7 +2711,7 @@
 			continue;
 
 		brd = &mxser_boards[m];
-		retval = mxser_get_ISA_conf(ioaddr[b], brd);
+		retval = mxser_get_ISA_conf(!ioaddr[b], brd);
 		if (retval <= 0) {
 			brd->info = NULL;
 			continue;
diff -Nur linux-2.6.30.orig/drivers/cpufreq/cpufreq.c linux-2.6.30/drivers/cpufreq/cpufreq.c
--- linux-2.6.30.orig/drivers/cpufreq/cpufreq.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/cpufreq/cpufreq.c	2009-06-14 20:25:19.000000000 +0200
@@ -808,7 +808,7 @@
 		ret = -ENOMEM;
 		goto nomem_out;
 	}
-	if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
+	if (!alloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
 		free_cpumask_var(policy->cpus);
 		kfree(policy);
 		ret = -ENOMEM;
diff -Nur linux-2.6.30.orig/drivers/ide/amd74xx.c linux-2.6.30/drivers/ide/amd74xx.c
--- linux-2.6.30.orig/drivers/ide/amd74xx.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/ide/amd74xx.c	2009-06-14 20:25:19.000000000 +0200
@@ -23,6 +23,11 @@
 
 #define DRV_NAME "amd74xx"
 
+static const char *am74xx_quirk_drives[] = {
+	"FUJITSU MHZ2160BH G2",
+	NULL
+};
+
 enum {
 	AMD_IDE_CONFIG		= 0x41,
 	AMD_CABLE_DETECT	= 0x42,
@@ -112,6 +117,19 @@
 	amd_set_drive(drive, XFER_PIO_0 + pio);
 }
 
+static void amd_quirkproc(ide_drive_t *drive)
+{
+	const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
+
+	for (list = am74xx_quirk_drives; *list != NULL; list++)
+			if (strstr(m, *list) != NULL) {
+				drive->quirk_list = 2;
+				return;
+			}
+
+	drive->quirk_list = 0;
+}
+
 static void amd7409_cable_detect(struct pci_dev *dev)
 {
 	/* no host side cable detection */
@@ -186,6 +204,7 @@
 static const struct ide_port_ops amd_port_ops = {
 	.set_pio_mode		= amd_set_pio_mode,
 	.set_dma_mode		= amd_set_drive,
+	.quirkproc		= amd_quirkproc,
 	.cable_detect		= amd_cable_detect,
 };
 
diff -Nur linux-2.6.30.orig/drivers/md/raid5.c linux-2.6.30/drivers/md/raid5.c
--- linux-2.6.30.orig/drivers/md/raid5.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/md/raid5.c	2009-06-14 20:25:20.000000000 +0200
@@ -362,7 +362,7 @@
 
 static struct stripe_head *
 get_active_stripe(raid5_conf_t *conf, sector_t sector,
-		  int previous, int noblock, int noquiesce)
+		  int previous, int noblock)
 {
 	struct stripe_head *sh;
 
@@ -372,7 +372,7 @@
 
 	do {
 		wait_event_lock_irq(conf->wait_for_stripe,
-				    conf->quiesce == 0 || noquiesce,
+				    conf->quiesce == 0,
 				    conf->device_lock, /* nothing */);
 		sh = __find_stripe(conf, sector, conf->generation - previous);
 		if (!sh) {
@@ -2671,7 +2671,7 @@
 			sector_t bn = compute_blocknr(sh, i, 1);
 			sector_t s = raid5_compute_sector(conf, bn, 0,
 							  &dd_idx, NULL);
-			sh2 = get_active_stripe(conf, s, 0, 1, 1);
+			sh2 = get_active_stripe(conf, s, 0, 1);
 			if (sh2 == NULL)
 				/* so far only the early blocks of this stripe
 				 * have been requested.  When later blocks
@@ -2944,7 +2944,7 @@
 	/* Finish reconstruct operations initiated by the expansion process */
 	if (sh->reconstruct_state == reconstruct_state_result) {
 		struct stripe_head *sh2
-			= get_active_stripe(conf, sh->sector, 1, 1, 1);
+			= get_active_stripe(conf, sh->sector, 1, 1);
 		if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
 			/* sh cannot be written until sh2 has been read.
 			 * so arrange for sh to be delayed a little
@@ -3189,7 +3189,7 @@
 
 	if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
 		struct stripe_head *sh2
-			= get_active_stripe(conf, sh->sector, 1, 1, 1);
+			= get_active_stripe(conf, sh->sector, 1, 1);
 		if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
 			/* sh cannot be written until sh2 has been read.
 			 * so arrange for sh to be delayed a little
@@ -3288,7 +3288,7 @@
 	int i;
 
 	rcu_read_lock();
-	for (i = 0; i < conf->raid_disks; i++) {
+	for (i=0; i<mddev->raid_disks; i++) {
 		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
 		if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) {
 			struct request_queue *r_queue = bdev_get_queue(rdev->bdev);
@@ -3675,7 +3675,7 @@
 			(unsigned long long)logical_sector);
 
 		sh = get_active_stripe(conf, new_sector, previous,
-				       (bi->bi_rw&RWA_MASK), 0);
+				       (bi->bi_rw&RWA_MASK));
 		if (sh) {
 			if (unlikely(previous)) {
 				/* expansion might have moved on while waiting for a
@@ -3873,7 +3873,7 @@
 	for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) {
 		int j;
 		int skipped = 0;
-		sh = get_active_stripe(conf, stripe_addr+i, 0, 0, 1);
+		sh = get_active_stripe(conf, stripe_addr+i, 0, 0);
 		set_bit(STRIPE_EXPANDING, &sh->state);
 		atomic_inc(&conf->reshape_stripes);
 		/* If any of this stripe is beyond the end of the old
@@ -3916,13 +3916,13 @@
 		raid5_compute_sector(conf, stripe_addr*(new_data_disks),
 				     1, &dd_idx, NULL);
 	last_sector =
-		raid5_compute_sector(conf, ((stripe_addr+reshape_sectors)
+		raid5_compute_sector(conf, ((stripe_addr+conf->chunk_size/512)
 					    *(new_data_disks) - 1),
 				     1, &dd_idx, NULL);
 	if (last_sector >= mddev->dev_sectors)
 		last_sector = mddev->dev_sectors - 1;
 	while (first_sector <= last_sector) {
-		sh = get_active_stripe(conf, first_sector, 1, 0, 1);
+		sh = get_active_stripe(conf, first_sector, 1, 0);
 		set_bit(STRIPE_EXPAND_SOURCE, &sh->state);
 		set_bit(STRIPE_HANDLE, &sh->state);
 		release_stripe(sh);
@@ -4022,9 +4022,9 @@
 
 	bitmap_cond_end_sync(mddev->bitmap, sector_nr);
 
-	sh = get_active_stripe(conf, sector_nr, 0, 1, 0);
+	sh = get_active_stripe(conf, sector_nr, 0, 1);
 	if (sh == NULL) {
-		sh = get_active_stripe(conf, sector_nr, 0, 0, 0);
+		sh = get_active_stripe(conf, sector_nr, 0, 0);
 		/* make sure we don't swamp the stripe cache if someone else
 		 * is trying to get access
 		 */
@@ -4034,7 +4034,7 @@
 	 * We don't need to check the 'failed' flag as when that gets set,
 	 * recovery aborts.
 	 */
-	for (i = 0; i < conf->raid_disks; i++)
+	for (i=0; i<mddev->raid_disks; i++)
 		if (conf->disks[i].rdev == NULL)
 			still_degraded = 1;
 
@@ -4086,7 +4086,7 @@
 			/* already done this stripe */
 			continue;
 
-		sh = get_active_stripe(conf, sector, 0, 1, 0);
+		sh = get_active_stripe(conf, sector, 0, 1);
 
 		if (!sh) {
 			/* failed to get a stripe - must wait */
diff -Nur linux-2.6.30.orig/drivers/net/Kconfig linux-2.6.30/drivers/net/Kconfig
--- linux-2.6.30.orig/drivers/net/Kconfig	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/net/Kconfig	2009-06-14 20:25:20.000000000 +0200
@@ -2362,6 +2362,13 @@
 	  Some boards that use the Discovery chipset are the Momenco
 	  Ocelot C and Jaguar ATX and Pegasos II.
 
+config TITAN_GE
+	bool "PMC-Sierra TITAN Gigabit Ethernet Support"
+	depends on PMC_YOSEMITE
+	help
+	  This enables support for the the integrated ethernet of
+	  PMC-Sierra's Titan SoC.
+
 config QLA3XXX
 	tristate "QLogic QLA3XXX Network Driver Support"
 	depends on PCI
diff -Nur linux-2.6.30.orig/drivers/net/Makefile linux-2.6.30/drivers/net/Makefile
--- linux-2.6.30.orig/drivers/net/Makefile	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/net/Makefile	2009-06-14 20:25:20.000000000 +0200
@@ -137,6 +137,8 @@
 obj-$(CONFIG_QLA3XXX) += qla3xxx.o
 obj-$(CONFIG_QLGE) += qlge/
 
+obj-$(CONFIG_TITAN_GE) += titan_mdio.o titan_ge.o
+
 obj-$(CONFIG_PPP) += ppp_generic.o
 obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
 obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
diff -Nur linux-2.6.30.orig/drivers/net/r8169.c linux-2.6.30/drivers/net/r8169.c
--- linux-2.6.30.orig/drivers/net/r8169.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/net/r8169.c	2009-06-14 20:25:20.000000000 +0200
@@ -66,6 +66,7 @@
 #define RX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
 #define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
 #define EarlyTxThld	0x3F	/* 0x3F means NO early transmit */
+#define RxPacketMaxSize	0x3FE8	/* 16K - 1 - ETH_HLEN - VLAN - CRC... */
 #define SafeMtu		0x1c20	/* ... actually life sucks beyond ~7k */
 #define InterFrameGap	0x03	/* 3 means InterFrameGap = the shortest one */
 
@@ -2356,10 +2357,10 @@
 	return cmd;
 }
 
-static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
+static void rtl_set_rx_max_size(void __iomem *ioaddr)
 {
 	/* Low hurts. Let's disable the filtering. */
-	RTL_W16(RxMaxSize, rx_buf_sz);
+	RTL_W16(RxMaxSize, 16383);
 }
 
 static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
@@ -2406,7 +2407,7 @@
 
 	RTL_W8(EarlyTxThres, EarlyTxThld);
 
-	rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
+	rtl_set_rx_max_size(ioaddr);
 
 	if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
 	    (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
@@ -2667,7 +2668,7 @@
 
 	RTL_W8(EarlyTxThres, EarlyTxThld);
 
-	rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
+	rtl_set_rx_max_size(ioaddr);
 
 	tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1;
 
@@ -2845,7 +2846,7 @@
 
 	RTL_W8(EarlyTxThres, EarlyTxThld);
 
-	rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
+	rtl_set_rx_max_size(ioaddr);
 
 	tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
 
diff -Nur linux-2.6.30.orig/drivers/net/titan_ge.c linux-2.6.30/drivers/net/titan_ge.c
--- linux-2.6.30.orig/drivers/net/titan_ge.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/drivers/net/titan_ge.c	2009-06-14 20:25:20.000000000 +0200
@@ -0,0 +1,2069 @@
+/*
+ * drivers/net/titan_ge.c - Driver for Titan ethernet ports
+ *
+ * Copyright (C) 2003 PMC-Sierra Inc.
+ * Author : Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * The MAC unit of the Titan consists of the following:
+ *
+ * -> XDMA Engine to move data to from the memory to the MAC packet FIFO
+ * -> FIFO is where the incoming and outgoing data is placed
+ * -> TRTG is the unit that pulls the data from the FIFO for Tx and pushes
+ *    the data into the FIFO for Rx
+ * -> TMAC is the outgoing MAC interface and RMAC is the incoming.
+ * -> AFX is the address filtering block
+ * -> GMII block to communicate with the PHY
+ *
+ * Rx will look like the following:
+ * GMII --> RMAC --> AFX --> TRTG --> Rx FIFO --> XDMA --> CPU memory
+ *
+ * Tx will look like the following:
+ * CPU memory --> XDMA --> Tx FIFO --> TRTG --> TMAC --> GMII
+ *
+ * The Titan driver has support for the following performance features:
+ * -> Rx side checksumming
+ * -> Jumbo Frames
+ * -> Interrupt Coalscing
+ * -> Rx NAPI
+ * -> SKB Recycling
+ * -> Transmit/Receive descriptors in SRAM
+ * -> Fast routing for IP forwarding
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ip.h>
+#include <linux/init.h>
+#include <linux/in.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/mii.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/prefetch.h>
+
+/* For MII specifc registers, titan_mdio.h should be included */
+#include <net/ip.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/types.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/titan_dep.h>
+
+#include "titan_ge.h"
+#include "titan_mdio.h"
+
+/* Static Function Declarations	 */
+static int titan_ge_eth_open(struct net_device *);
+static void titan_ge_eth_stop(struct net_device *);
+static struct net_device_stats *titan_ge_get_stats(struct net_device *);
+static int titan_ge_init_rx_desc_ring(titan_ge_port_info *, int, int,
+				      unsigned long, unsigned long,
+				      unsigned long);
+static int titan_ge_init_tx_desc_ring(titan_ge_port_info *, int,
+				      unsigned long, unsigned long);
+
+static int titan_ge_open(struct net_device *);
+static int titan_ge_start_xmit(struct sk_buff *, struct net_device *);
+static int titan_ge_stop(struct net_device *);
+
+static unsigned long titan_ge_tx_coal(unsigned long, int);
+
+static void titan_ge_port_reset(unsigned int);
+static int titan_ge_free_tx_queue(titan_ge_port_info *);
+static int titan_ge_rx_task(struct net_device *, titan_ge_port_info *);
+static int titan_ge_port_start(struct net_device *, titan_ge_port_info *);
+
+static int titan_ge_return_tx_desc(titan_ge_port_info *, int);
+
+/*
+ * Some configuration for the FIFO and the XDMA channel needs
+ * to be done only once for all the ports. This flag controls
+ * that
+ */
+static unsigned long config_done;
+
+/*
+ * One time out of memory flag
+ */
+static unsigned int oom_flag;
+
+static int titan_ge_poll(struct net_device *netdev, int *budget);
+
+static int titan_ge_receive_queue(struct net_device *, unsigned int);
+
+static struct platform_device *titan_ge_device[3];
+
+/* MAC Address */
+extern unsigned char titan_ge_mac_addr_base[6];
+
+unsigned long titan_ge_base;
+static unsigned long titan_ge_sram;
+
+static char titan_string[] = "titan";
+
+/*
+ * The Titan GE has two alignment requirements:
+ * -> skb->data to be cacheline aligned (32 byte)
+ * -> IP header alignment to 16 bytes
+ *
+ * The latter is not implemented. So, that results in an extra copy on
+ * the Rx. This is a big performance hog. For the former case, the
+ * dev_alloc_skb() has been replaced with titan_ge_alloc_skb(). The size
+ * requested is calculated:
+ *
+ * Ethernet Frame Size : 1518
+ * Ethernet Header     : 14
+ * Future Titan change for IP header alignment : 2
+ *
+ * Hence, we allocate (1518 + 14 + 2+ 64) = 1580 bytes.  For IP header
+ * alignment, we use skb_reserve().
+ */
+
+#define ALIGNED_RX_SKB_ADDR(addr) \
+	((((unsigned long)(addr) + (64UL - 1UL)) \
+	& ~(64UL - 1UL)) - (unsigned long)(addr))
+
+#define titan_ge_alloc_skb(__length, __gfp_flags) \
+({      struct sk_buff *__skb; \
+	__skb = alloc_skb((__length) + 64, (__gfp_flags)); \
+	if(__skb) { \
+		int __offset = (int) ALIGNED_RX_SKB_ADDR(__skb->data); \
+		if(__offset) \
+			skb_reserve(__skb, __offset); \
+	} \
+	__skb; \
+})
+
+/*
+ * Configure the GMII block of the Titan based on what the PHY tells us
+ */
+static void titan_ge_gmii_config(int port_num)
+{
+	unsigned int reg_data = 0, phy_reg;
+	int err;
+
+	err = titan_ge_mdio_read(port_num, TITAN_GE_MDIO_PHY_STATUS, &phy_reg);
+
+	if (err == TITAN_GE_MDIO_ERROR) {
+		printk(KERN_ERR
+		       "Could not read PHY control register 0x11 \n");
+		printk(KERN_ERR
+			"Setting speed to 1000 Mbps and Duplex to Full \n");
+
+		return;
+	}
+
+	err = titan_ge_mdio_write(port_num, TITAN_GE_MDIO_PHY_IE, 0);
+
+	if (phy_reg & 0x8000) {
+		if (phy_reg & 0x2000) {
+			/* Full Duplex and 1000 Mbps */
+			TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_MODE +
+					(port_num << 12)), 0x201);
+		}  else {
+			/* Half Duplex and 1000 Mbps */
+			TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_MODE +
+					(port_num << 12)), 0x2201);
+			}
+	}
+	if (phy_reg & 0x4000) {
+		if (phy_reg & 0x2000) {
+			/* Full Duplex and 100 Mbps */
+			TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_MODE +
+					(port_num << 12)), 0x100);
+		} else {
+			/* Half Duplex and 100 Mbps */
+			TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_MODE +
+					(port_num << 12)), 0x2100);
+		}
+	}
+	reg_data = TITAN_GE_READ(TITAN_GE_GMII_CONFIG_GENERAL +
+				(port_num << 12));
+	reg_data |= 0x3;
+	TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_GENERAL +
+			(port_num << 12)), reg_data);
+}
+
+/*
+ * Enable the TMAC if it is not
+ */
+static void titan_ge_enable_tx(unsigned int port_num)
+{
+	unsigned long reg_data;
+
+	reg_data = TITAN_GE_READ(TITAN_GE_TMAC_CONFIG_1 + (port_num << 12));
+	if (!(reg_data & 0x8000)) {
+		printk("TMAC disabled for port %d!! \n", port_num);
+
+		reg_data |= 0x0001;	/* Enable TMAC */
+		reg_data |= 0x4000;	/* CRC Check Enable */
+		reg_data |= 0x2000;	/* Padding enable */
+		reg_data |= 0x0800;	/* CRC Add enable */
+		reg_data |= 0x0080;	/* PAUSE frame */
+
+		TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_1 +
+				(port_num << 12)), reg_data);
+	}
+}
+
+/*
+ * Tx Timeout function
+ */
+static void titan_ge_tx_timeout(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+
+	printk(KERN_INFO "%s: TX timeout  ", netdev->name);
+	printk(KERN_INFO "Resetting card \n");
+
+	/* Do the reset outside of interrupt context */
+	schedule_work(&titan_ge_eth->tx_timeout_task);
+}
+
+/*
+ * Update the AFX tables for UC and MC for slice 0 only
+ */
+static void titan_ge_update_afx(titan_ge_port_info * titan_ge_eth)
+{
+	int port = titan_ge_eth->port_num;
+	unsigned int i;
+	volatile unsigned long reg_data = 0;
+	u8 p_addr[6];
+
+	memcpy(p_addr, titan_ge_eth->port_mac_addr, 6);
+
+	/* Set the MAC address here for TMAC and RMAC */
+	TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_HI + (port << 12)),
+		       ((p_addr[5] << 8) | p_addr[4]));
+	TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_MID + (port << 12)),
+		       ((p_addr[3] << 8) | p_addr[2]));
+	TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_LOW + (port << 12)),
+		       ((p_addr[1] << 8) | p_addr[0]));
+
+	TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_HI + (port << 12)),
+		       ((p_addr[5] << 8) | p_addr[4]));
+	TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_MID + (port << 12)),
+		       ((p_addr[3] << 8) | p_addr[2]));
+	TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_LOW + (port << 12)),
+		       ((p_addr[1] << 8) | p_addr[0]));
+
+	TITAN_GE_WRITE((0x112c | (port << 12)), 0x1);
+	/* Configure the eight address filters */
+	for (i = 0; i < 8; i++) {
+		/* Select each of the eight filters */
+		TITAN_GE_WRITE((TITAN_GE_AFX_ADDRS_FILTER_CTRL_2 +
+				(port << 12)), i);
+
+		/* Configure the match */
+		reg_data = 0x9;	/* Forward Enable Bit */
+		TITAN_GE_WRITE((TITAN_GE_AFX_ADDRS_FILTER_CTRL_0 +
+				(port << 12)), reg_data);
+
+		/* Finally, AFX Exact Match Address Registers */
+		TITAN_GE_WRITE((TITAN_GE_AFX_EXACT_MATCH_LOW + (port << 12)),
+			       ((p_addr[1] << 8) | p_addr[0]));
+		TITAN_GE_WRITE((TITAN_GE_AFX_EXACT_MATCH_MID + (port << 12)),
+			       ((p_addr[3] << 8) | p_addr[2]));
+		TITAN_GE_WRITE((TITAN_GE_AFX_EXACT_MATCH_HIGH + (port << 12)),
+			       ((p_addr[5] << 8) | p_addr[4]));
+
+		/* VLAN id set to 0 */
+		TITAN_GE_WRITE((TITAN_GE_AFX_EXACT_MATCH_VID +
+				(port << 12)), 0);
+	}
+}
+
+/*
+ * Actual Routine to reset the adapter when the timeout occurred
+ */
+static void titan_ge_tx_timeout_task(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	int port = titan_ge_eth->port_num;
+
+	printk("Titan GE: Transmit timed out. Resetting ... \n");
+
+	/* Dump debug info */
+	printk(KERN_ERR "TRTG cause : %x \n",
+			TITAN_GE_READ(0x100c + (port << 12)));
+
+	/* Fix this for the other ports */
+	printk(KERN_ERR "FIFO cause : %x \n", TITAN_GE_READ(0x482c));
+	printk(KERN_ERR "IE cause : %x \n", TITAN_GE_READ(0x0040));
+	printk(KERN_ERR "XDMA GDI ERROR : %x \n",
+			TITAN_GE_READ(0x5008 + (port << 8)));
+	printk(KERN_ERR "CHANNEL ERROR: %x \n",
+			TITAN_GE_READ(TITAN_GE_CHANNEL0_INTERRUPT
+						+ (port << 8)));
+
+	netif_device_detach(netdev);
+	titan_ge_port_reset(titan_ge_eth->port_num);
+	titan_ge_port_start(netdev, titan_ge_eth);
+	netif_device_attach(netdev);
+}
+
+/*
+ * Change the MTU of the Ethernet Device
+ */
+static int titan_ge_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned long flags;
+
+	if ((new_mtu > 9500) || (new_mtu < 64))
+		return -EINVAL;
+
+	spin_lock_irqsave(&titan_ge_eth->lock, flags);
+
+	netdev->mtu = new_mtu;
+
+	/* Now we have to reopen the interface so that SKBs with the new
+	 * size will be allocated */
+
+	if (netif_running(netdev)) {
+		titan_ge_eth_stop(netdev);
+
+		if (titan_ge_eth_open(netdev) != TITAN_OK) {
+			printk(KERN_ERR
+			       "%s: Fatal error on opening device\n",
+			       netdev->name);
+			spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
+			return -1;
+		}
+	}
+
+	spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
+	return 0;
+}
+
+/*
+ * Titan Gbe Interrupt Handler. All the three ports send interrupt to one line
+ * only. Once an interrupt is triggered, figure out the port and then check
+ * the channel.
+ */
+static irqreturn_t titan_ge_int_handler(int irq, void *dev_id)
+{
+	struct net_device *netdev = (struct net_device *) dev_id;
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned int port_num = titan_ge_eth->port_num;
+	unsigned int reg_data;
+	unsigned int eth_int_cause_error = 0, is;
+	unsigned long eth_int_cause1;
+	int err = 0;
+#ifdef CONFIG_SMP
+	unsigned long eth_int_cause2;
+#endif
+
+	/* Ack the CPU interrupt */
+	switch (port_num) {
+	case 0:
+		is = OCD_READ(RM9000x2_OCD_INTP0STATUS1);
+		OCD_WRITE(RM9000x2_OCD_INTP0CLEAR1, is);
+
+#ifdef CONFIG_SMP
+		is = OCD_READ(RM9000x2_OCD_INTP1STATUS1);
+		OCD_WRITE(RM9000x2_OCD_INTP1CLEAR1, is);
+#endif
+		break;
+
+	case 1:
+		is = OCD_READ(RM9000x2_OCD_INTP0STATUS0);
+		OCD_WRITE(RM9000x2_OCD_INTP0CLEAR0, is);
+
+#ifdef CONFIG_SMP
+		is = OCD_READ(RM9000x2_OCD_INTP1STATUS0);
+		OCD_WRITE(RM9000x2_OCD_INTP1CLEAR0, is);
+#endif
+		break;
+
+	case 2:
+		is = OCD_READ(RM9000x2_OCD_INTP0STATUS4);
+		OCD_WRITE(RM9000x2_OCD_INTP0CLEAR4, is);
+
+#ifdef CONFIG_SMP
+		is = OCD_READ(RM9000x2_OCD_INTP1STATUS4);
+		OCD_WRITE(RM9000x2_OCD_INTP1CLEAR4, is);
+#endif
+	}
+
+	eth_int_cause1 = TITAN_GE_READ(TITAN_GE_INTR_XDMA_CORE_A);
+#ifdef CONFIG_SMP
+	eth_int_cause2 = TITAN_GE_READ(TITAN_GE_INTR_XDMA_CORE_B);
+#endif
+
+	/* Spurious interrupt */
+#ifdef CONFIG_SMP
+	if ( (eth_int_cause1 == 0) && (eth_int_cause2 == 0)) {
+#else
+	if (eth_int_cause1 == 0) {
+#endif
+		eth_int_cause_error = TITAN_GE_READ(TITAN_GE_CHANNEL0_INTERRUPT +
+					(port_num << 8));
+
+		if (eth_int_cause_error == 0)
+			return IRQ_NONE;
+	}
+
+	/* Handle Tx first. No need to ack interrupts */
+#ifdef CONFIG_SMP
+	if ( (eth_int_cause1 & 0x20202) ||
+		(eth_int_cause2 & 0x20202) )
+#else
+	if (eth_int_cause1 & 0x20202)
+#endif
+		titan_ge_free_tx_queue(titan_ge_eth);
+
+	/* Handle the Rx next */
+#ifdef CONFIG_SMP
+	if ( (eth_int_cause1 & 0x10101) ||
+		(eth_int_cause2 & 0x10101)) {
+#else
+	if (eth_int_cause1 & 0x10101) {
+#endif
+		if (netif_rx_schedule_prep(netdev)) {
+			unsigned int ack;
+
+			ack = TITAN_GE_READ(TITAN_GE_INTR_XDMA_IE);
+			/* Disable Tx and Rx both */
+			if (port_num == 0)
+				ack &= ~(0x3);
+			if (port_num == 1)
+				ack &= ~(0x300);
+
+			if (port_num == 2)
+				ack &= ~(0x30000);
+
+			/* Interrupts have been disabled */
+			TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, ack);
+
+			__netif_rx_schedule(netdev);
+		}
+	}
+
+	/* Handle error interrupts */
+	if (eth_int_cause_error && (eth_int_cause_error != 0x2)) {
+		printk(KERN_ERR
+			"XDMA Channel Error : %x  on port %d\n",
+			eth_int_cause_error, port_num);
+
+		printk(KERN_ERR
+			"XDMA GDI Hardware error : %x  on port %d\n",
+			TITAN_GE_READ(0x5008 + (port_num << 8)), port_num);
+
+		printk(KERN_ERR
+			"XDMA currently has %d Rx descriptors \n",
+			TITAN_GE_READ(0x5048 + (port_num << 8)));
+
+		printk(KERN_ERR
+			"XDMA currently has prefetcted %d Rx descriptors \n",
+			TITAN_GE_READ(0x505c + (port_num << 8)));
+
+		TITAN_GE_WRITE((TITAN_GE_CHANNEL0_INTERRUPT +
+			       (port_num << 8)), eth_int_cause_error);
+	}
+
+	/*
+	 * PHY interrupt to inform abt the changes. Reading the
+	 * PHY Status register will clear the interrupt
+	 */
+	if ((!(eth_int_cause1 & 0x30303)) &&
+		(eth_int_cause_error == 0)) {
+		err =
+		    titan_ge_mdio_read(port_num,
+			       TITAN_GE_MDIO_PHY_IS, &reg_data);
+
+		if (reg_data & 0x0400) {
+			/* Link status change */
+			titan_ge_mdio_read(port_num,
+				   TITAN_GE_MDIO_PHY_STATUS, &reg_data);
+			if (!(reg_data & 0x0400)) {
+				/* Link is down */
+				netif_carrier_off(netdev);
+				netif_stop_queue(netdev);
+			} else {
+				/* Link is up */
+				netif_carrier_on(netdev);
+				netif_wake_queue(netdev);
+
+				/* Enable the queue */
+				titan_ge_enable_tx(port_num);
+			}
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Multicast and Promiscuous mode set. The
+ * set_multi entry point is called whenever the
+ * multicast address list or the network interface
+ * flags are updated.
+ */
+static void titan_ge_set_multi(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned int port_num = titan_ge_eth->port_num;
+	unsigned long reg_data;
+
+	reg_data = TITAN_GE_READ(TITAN_GE_AFX_ADDRS_FILTER_CTRL_1 +
+				(port_num << 12));
+
+	if (netdev->flags & IFF_PROMISC) {
+		reg_data |= 0x2;
+	}
+	else if (netdev->flags & IFF_ALLMULTI) {
+		reg_data |= 0x01;
+		reg_data |= 0x400; /* Use the 64-bit Multicast Hash bin */
+	}
+	else {
+		reg_data = 0x2;
+	}
+
+	TITAN_GE_WRITE((TITAN_GE_AFX_ADDRS_FILTER_CTRL_1 +
+			(port_num << 12)), reg_data);
+	if (reg_data & 0x01) {
+		TITAN_GE_WRITE((TITAN_GE_AFX_MULTICAST_HASH_LOW +
+				(port_num << 12)), 0xffff);
+		TITAN_GE_WRITE((TITAN_GE_AFX_MULTICAST_HASH_MIDLOW +
+				(port_num << 12)), 0xffff);
+		TITAN_GE_WRITE((TITAN_GE_AFX_MULTICAST_HASH_MIDHI +
+				(port_num << 12)), 0xffff);
+		TITAN_GE_WRITE((TITAN_GE_AFX_MULTICAST_HASH_HI +
+				(port_num << 12)), 0xffff);
+	}
+}
+
+/*
+ * Open the network device
+ */
+static int titan_ge_open(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned int port_num = titan_ge_eth->port_num;
+	unsigned int irq = TITAN_ETH_PORT_IRQ - port_num;
+	int retval;
+
+	retval = request_irq(irq, titan_ge_int_handler,
+		     SA_INTERRUPT | SA_SAMPLE_RANDOM , netdev->name, netdev);
+
+	if (retval != 0) {
+		printk(KERN_ERR "Cannot assign IRQ number to TITAN GE \n");
+		return -1;
+	}
+
+	netdev->irq = irq;
+	printk(KERN_INFO "Assigned IRQ %d to port %d\n", irq, port_num);
+
+	spin_lock_irq(&(titan_ge_eth->lock));
+
+	if (titan_ge_eth_open(netdev) != TITAN_OK) {
+		spin_unlock_irq(&(titan_ge_eth->lock));
+		printk("%s: Error opening interface \n", netdev->name);
+		free_irq(netdev->irq, netdev);
+		return -EBUSY;
+	}
+
+	spin_unlock_irq(&(titan_ge_eth->lock));
+
+	return 0;
+}
+
+/*
+ * Allocate the SKBs for the Rx ring. Also used
+ * for refilling the queue
+ */
+static int titan_ge_rx_task(struct net_device *netdev,
+				titan_ge_port_info *titan_ge_port)
+{
+	struct device *device = &titan_ge_device[titan_ge_port->port_num]->dev;
+	volatile titan_ge_rx_desc *rx_desc;
+	struct sk_buff *skb;
+	int rx_used_desc;
+	int count = 0;
+
+	while (titan_ge_port->rx_ring_skbs < titan_ge_port->rx_ring_size) {
+
+	/* First try to get the skb from the recycler */
+#ifdef TITAN_GE_JUMBO_FRAMES
+		skb = titan_ge_alloc_skb(TITAN_GE_JUMBO_BUFSIZE, GFP_ATOMIC);
+#else
+		skb = titan_ge_alloc_skb(TITAN_GE_STD_BUFSIZE, GFP_ATOMIC);
+#endif
+		if (unlikely(!skb)) {
+			/* OOM, set the flag */
+			printk("OOM \n");
+			oom_flag = 1;
+			break;
+		}
+		count++;
+		skb->dev = netdev;
+
+		titan_ge_port->rx_ring_skbs++;
+
+		rx_used_desc = titan_ge_port->rx_used_desc_q;
+		rx_desc = &(titan_ge_port->rx_desc_area[rx_used_desc]);
+
+#ifdef TITAN_GE_JUMBO_FRAMES
+		rx_desc->buffer_addr = dma_map_single(device, skb->data,
+				TITAN_GE_JUMBO_BUFSIZE - 2, DMA_FROM_DEVICE);
+#else
+		rx_desc->buffer_addr = dma_map_single(device, skb->data,
+				TITAN_GE_STD_BUFSIZE - 2, DMA_FROM_DEVICE);
+#endif
+
+		titan_ge_port->rx_skb[rx_used_desc] = skb;
+		rx_desc->cmd_sts = TITAN_GE_RX_BUFFER_OWNED;
+
+		titan_ge_port->rx_used_desc_q =
+			(rx_used_desc + 1) % TITAN_GE_RX_QUEUE;
+	}
+
+	return count;
+}
+
+/*
+ * Actual init of the Tital GE port. There is one register for
+ * the channel configuration
+ */
+static void titan_port_init(struct net_device *netdev,
+			    titan_ge_port_info * titan_ge_eth)
+{
+	unsigned long reg_data;
+
+	titan_ge_port_reset(titan_ge_eth->port_num);
+
+	/* First reset the TMAC */
+	reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG);
+	reg_data |= 0x80000000;
+	TITAN_GE_WRITE(TITAN_GE_CHANNEL0_CONFIG, reg_data);
+
+	udelay(30);
+
+	reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG);
+	reg_data &= ~(0xc0000000);
+	TITAN_GE_WRITE(TITAN_GE_CHANNEL0_CONFIG, reg_data);
+
+	/* Now reset the RMAC */
+	reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG);
+	reg_data |= 0x00080000;
+	TITAN_GE_WRITE(TITAN_GE_CHANNEL0_CONFIG, reg_data);
+
+	udelay(30);
+
+	reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG);
+	reg_data &= ~(0x000c0000);
+	TITAN_GE_WRITE(TITAN_GE_CHANNEL0_CONFIG, reg_data);
+}
+
+/*
+ * Start the port. All the hardware specific configuration
+ * for the XDMA, Tx FIFO, Rx FIFO, TMAC, RMAC, TRTG and AFX
+ * go here
+ */
+static int titan_ge_port_start(struct net_device *netdev,
+				titan_ge_port_info * titan_port)
+{
+	volatile unsigned long reg_data, reg_data1;
+	int port_num = titan_port->port_num;
+	int count = 0;
+	unsigned long reg_data_1;
+
+	if (config_done == 0) {
+		reg_data = TITAN_GE_READ(0x0004);
+		reg_data |= 0x100;
+		TITAN_GE_WRITE(0x0004, reg_data);
+
+		reg_data &= ~(0x100);
+		TITAN_GE_WRITE(0x0004, reg_data);
+
+		/* Turn on GMII/MII mode and turn off TBI mode */
+		reg_data = TITAN_GE_READ(TITAN_GE_TSB_CTRL_1);
+		reg_data |= 0x00000700;
+		reg_data &= ~(0x00800000); /* Fencing */
+
+		TITAN_GE_WRITE(0x000c, 0x00001100);
+
+		TITAN_GE_WRITE(TITAN_GE_TSB_CTRL_1, reg_data);
+
+		/* Set the CPU Resource Limit register */
+		TITAN_GE_WRITE(0x00f8, 0x8);
+
+		/* Be conservative when using the BIU buffers */
+		TITAN_GE_WRITE(0x0068, 0x4);
+	}
+
+	titan_port->tx_threshold = 0;
+	titan_port->rx_threshold = 0;
+
+	/* We need to write the descriptors for Tx and Rx */
+	TITAN_GE_WRITE((TITAN_GE_CHANNEL0_TX_DESC + (port_num << 8)),
+		       (unsigned long) titan_port->tx_dma);
+	TITAN_GE_WRITE((TITAN_GE_CHANNEL0_RX_DESC + (port_num << 8)),
+		       (unsigned long) titan_port->rx_dma);
+
+	if (config_done == 0) {
+		/* Step 1:  XDMA config	*/
+		reg_data = TITAN_GE_READ(TITAN_GE_XDMA_CONFIG);
+		reg_data &= ~(0x80000000);      /* clear reset */
+		reg_data |= 0x1 << 29;	/* sparse tx descriptor spacing */
+		reg_data |= 0x1 << 28;	/* sparse rx descriptor spacing */
+		reg_data |= (0x1 << 23) | (0x1 << 24);  /* Descriptor Coherency */
+		reg_data |= (0x1 << 21) | (0x1 << 22);  /* Data Coherency */
+		TITAN_GE_WRITE(TITAN_GE_XDMA_CONFIG, reg_data);
+	}
+
+	/* IR register for the XDMA */
+	reg_data = TITAN_GE_READ(TITAN_GE_GDI_INTERRUPT_ENABLE + (port_num << 8));
+	reg_data |= 0x80068000; /* No Rx_OOD */
+	TITAN_GE_WRITE((TITAN_GE_GDI_INTERRUPT_ENABLE + (port_num << 8)), reg_data);
+
+	/* Start the Tx and Rx XDMA controller */
+	reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG + (port_num << 8));
+	reg_data &= 0x4fffffff;     /* Clear tx reset */
+	reg_data &= 0xfff4ffff;     /* Clear rx reset */
+
+#ifdef TITAN_GE_JUMBO_FRAMES
+	reg_data |= 0xa0 | 0x30030000;
+#else
+	reg_data |= 0x40 | 0x20030000;
+#endif
+
+#ifndef CONFIG_SMP
+	reg_data &= ~(0x10);
+	reg_data |= 0x0f; /* All of the packet */
+#endif
+
+	TITAN_GE_WRITE((TITAN_GE_CHANNEL0_CONFIG + (port_num << 8)), reg_data);
+
+	/* Rx desc count */
+	count = titan_ge_rx_task(netdev, titan_port);
+	TITAN_GE_WRITE((0x5048 + (port_num << 8)), count);
+	count = TITAN_GE_READ(0x5048 + (port_num << 8));
+
+	udelay(30);
+
+	/*
+	 * Step 2:  Configure the SDQPF, i.e. FIFO
+	 */
+	if (config_done == 0) {
+		reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_RXFIFO_CTL);
+		reg_data = 0x1;
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_CTL, reg_data);
+		reg_data &= ~(0x1);
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_CTL, reg_data);
+		reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_RXFIFO_CTL);
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_CTL, reg_data);
+
+		reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_TXFIFO_CTL);
+		reg_data = 0x1;
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_CTL, reg_data);
+		reg_data &= ~(0x1);
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_CTL, reg_data);
+		reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_TXFIFO_CTL);
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_CTL, reg_data);
+	}
+	/*
+	 * Enable RX FIFO 0, 4 and 8
+	 */
+	if (port_num == 0) {
+		reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_RXFIFO_0);
+
+		reg_data |= 0x100000;
+		reg_data |= (0xff << 10);
+
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_0, reg_data);
+		/*
+		 * BAV2,BAV and DAV settings for the Rx FIFO
+		 */
+		reg_data1 = TITAN_GE_READ(0x4844);
+		reg_data1 |= ( (0x10 << 20) | (0x10 << 10) | 0x1);
+		TITAN_GE_WRITE(0x4844, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_0, reg_data);
+
+		reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_TXFIFO_0);
+		reg_data |= 0x100000;
+
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_0, reg_data);
+
+		reg_data |= (0xff << 10);
+
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_0, reg_data);
+
+		/*
+		 * BAV2, BAV and DAV settings for the Tx FIFO
+		 */
+		reg_data1 = TITAN_GE_READ(0x4944);
+		reg_data1 = ( (0x1 << 20) | (0x1 << 10) | 0x10);
+
+		TITAN_GE_WRITE(0x4944, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_0, reg_data);
+
+	}
+
+	if (port_num == 1) {
+		reg_data = TITAN_GE_READ(0x4870);
+
+		reg_data |= 0x100000;
+		reg_data |= (0xff << 10) | (0xff + 1);
+
+		TITAN_GE_WRITE(0x4870, reg_data);
+		/*
+		 * BAV2,BAV and DAV settings for the Rx FIFO
+		 */
+		reg_data1 = TITAN_GE_READ(0x4874);
+		reg_data1 |= ( (0x10 << 20) | (0x10 << 10) | 0x1);
+		TITAN_GE_WRITE(0x4874, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(0x4870, reg_data);
+
+		reg_data = TITAN_GE_READ(0x494c);
+		reg_data |= 0x100000;
+
+		TITAN_GE_WRITE(0x494c, reg_data);
+		reg_data |= (0xff << 10) | (0xff + 1);
+		TITAN_GE_WRITE(0x494c, reg_data);
+
+		/*
+		 * BAV2, BAV and DAV settings for the Tx FIFO
+		 */
+		reg_data1 = TITAN_GE_READ(0x4950);
+		reg_data1 = ( (0x1 << 20) | (0x1 << 10) | 0x10);
+
+		TITAN_GE_WRITE(0x4950, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(0x494c, reg_data);
+	}
+
+	/*
+	 * Titan 1.2 revision does support port #2
+	 */
+	if (port_num == 2) {
+		/*
+		 * Put the descriptors in the SRAM
+		 */
+		reg_data = TITAN_GE_READ(0x48a0);
+
+		reg_data |= 0x100000;
+		reg_data |= (0xff << 10) | (2*(0xff + 1));
+
+		TITAN_GE_WRITE(0x48a0, reg_data);
+		/*
+		 * BAV2,BAV and DAV settings for the Rx FIFO
+		 */
+		reg_data1 = TITAN_GE_READ(0x48a4);
+		reg_data1 |= ( (0x10 << 20) | (0x10 << 10) | 0x1);
+		TITAN_GE_WRITE(0x48a4, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(0x48a0, reg_data);
+
+		reg_data = TITAN_GE_READ(0x4958);
+		reg_data |= 0x100000;
+
+		TITAN_GE_WRITE(0x4958, reg_data);
+		reg_data |= (0xff << 10) | (2*(0xff + 1));
+		TITAN_GE_WRITE(0x4958, reg_data);
+
+		/*
+		 * BAV2, BAV and DAV settings for the Tx FIFO
+		 */
+		reg_data1 = TITAN_GE_READ(0x495c);
+		reg_data1 = ( (0x1 << 20) | (0x1 << 10) | 0x10);
+
+		TITAN_GE_WRITE(0x495c, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(0x4958, reg_data);
+	}
+
+	if (port_num == 2) {
+		reg_data = TITAN_GE_READ(0x48a0);
+
+		reg_data |= 0x100000;
+		reg_data |= (0xff << 10) | (2*(0xff + 1));
+
+		TITAN_GE_WRITE(0x48a0, reg_data);
+		/*
+		 * BAV2,BAV and DAV settings for the Rx FIFO
+		 */
+		reg_data1 = TITAN_GE_READ(0x48a4);
+		reg_data1 |= ( (0x10 << 20) | (0x10 << 10) | 0x1);
+		TITAN_GE_WRITE(0x48a4, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(0x48a0, reg_data);
+
+		reg_data = TITAN_GE_READ(0x4958);
+		reg_data |= 0x100000;
+
+		TITAN_GE_WRITE(0x4958, reg_data);
+		reg_data |= (0xff << 10) | (2*(0xff + 1));
+		TITAN_GE_WRITE(0x4958, reg_data);
+
+		/*
+		 * BAV2, BAV and DAV settings for the Tx FIFO
+		 */
+		reg_data1 = TITAN_GE_READ(0x495c);
+		reg_data1 = ( (0x1 << 20) | (0x1 << 10) | 0x10);
+
+		TITAN_GE_WRITE(0x495c, reg_data1);
+
+		reg_data &= ~(0x00100000);
+		reg_data |= 0x200000;
+
+		TITAN_GE_WRITE(0x4958, reg_data);
+	}
+
+	/*
+	 * Step 3:  TRTG block enable
+	 */
+	reg_data = TITAN_GE_READ(TITAN_GE_TRTG_CONFIG + (port_num << 12));
+
+	/*
+	 * This is the 1.2 revision of the chip. It has fix for the
+	 * IP header alignment. Now, the IP header begins at an
+	 * aligned address and this wont need an extra copy in the
+	 * driver. This performance drawback existed in the previous
+	 * versions of the silicon
+	 */
+	reg_data_1 = TITAN_GE_READ(0x103c + (port_num << 12));
+	reg_data_1 |= 0x40000000;
+	TITAN_GE_WRITE((0x103c + (port_num << 12)), reg_data_1);
+
+	reg_data_1 |= 0x04000000;
+	TITAN_GE_WRITE((0x103c + (port_num << 12)), reg_data_1);
+
+	mdelay(5);
+
+	reg_data_1 &= ~(0x04000000);
+	TITAN_GE_WRITE((0x103c + (port_num << 12)), reg_data_1);
+
+	mdelay(5);
+
+	reg_data |= 0x0001;
+	TITAN_GE_WRITE((TITAN_GE_TRTG_CONFIG + (port_num << 12)), reg_data);
+
+	/*
+	 * Step 4:  Start the Tx activity
+	 */
+	TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_2 + (port_num << 12)), 0xe197);
+#ifdef TITAN_GE_JUMBO_FRAMES
+	TITAN_GE_WRITE((0x1258 + (port_num << 12)), 0x4000);
+#endif
+	reg_data = TITAN_GE_READ(TITAN_GE_TMAC_CONFIG_1 + (port_num << 12));
+	reg_data |= 0x0001;	/* Enable TMAC */
+	reg_data |= 0x6c70;	/* PAUSE also set */
+
+	TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_1 + (port_num << 12)), reg_data);
+
+	udelay(30);
+
+	/* Destination Address drop bit */
+	reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_2 + (port_num << 12));
+	reg_data |= 0x218;        /* DA_DROP bit and pause */
+	TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_2 + (port_num << 12)), reg_data);
+
+	TITAN_GE_WRITE((0x1218 + (port_num << 12)), 0x3);
+
+#ifdef TITAN_GE_JUMBO_FRAMES
+	TITAN_GE_WRITE((0x1208 + (port_num << 12)), 0x4000);
+#endif
+	/* Start the Rx activity */
+	reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_1 + (port_num << 12));
+	reg_data |= 0x0001;	/* RMAC Enable */
+	reg_data |= 0x0010;	/* CRC Check enable */
+	reg_data |= 0x0040;	/* Min Frame check enable */
+	reg_data |= 0x4400;	/* Max Frame check enable */
+
+	TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_1 + (port_num << 12)), reg_data);
+
+	udelay(30);
+
+	/*
+	 * Enable the Interrupts for Tx and Rx
+	 */
+	reg_data1 = TITAN_GE_READ(TITAN_GE_INTR_XDMA_IE);
+
+	if (port_num == 0) {
+		reg_data1 |= 0x3;
+#ifdef CONFIG_SMP
+		TITAN_GE_WRITE(0x0038, 0x003);
+#else
+		TITAN_GE_WRITE(0x0038, 0x303);
+#endif
+	}
+
+	if (port_num == 1) {
+		reg_data1 |= 0x300;
+	}
+
+	if (port_num == 2)
+		reg_data1 |= 0x30000;
+
+	TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, reg_data1);
+	TITAN_GE_WRITE(0x003c, 0x300);
+
+	if (config_done == 0) {
+		TITAN_GE_WRITE(0x0024, 0x04000024);	/* IRQ vector */
+		TITAN_GE_WRITE(0x0020, 0x000fb000);	/* INTMSG base */
+	}
+
+	/* Priority */
+	reg_data = TITAN_GE_READ(0x1038 + (port_num << 12));
+	reg_data &= ~(0x00f00000);
+	TITAN_GE_WRITE((0x1038 + (port_num << 12)), reg_data);
+
+	/* Step 5:  GMII config */
+	titan_ge_gmii_config(port_num);
+
+	if (config_done == 0) {
+		TITAN_GE_WRITE(0x1a80, 0);
+		config_done = 1;
+	}
+
+	return TITAN_OK;
+}
+
+/*
+ * Function to queue the packet for the Ethernet device
+ */
+static void titan_ge_tx_queue(titan_ge_port_info * titan_ge_eth,
+				struct sk_buff * skb)
+{
+	struct device *device = &titan_ge_device[titan_ge_eth->port_num]->dev;
+	unsigned int curr_desc = titan_ge_eth->tx_curr_desc_q;
+	volatile titan_ge_tx_desc *tx_curr;
+	int port_num = titan_ge_eth->port_num;
+
+	tx_curr = &(titan_ge_eth->tx_desc_area[curr_desc]);
+	tx_curr->buffer_addr =
+		dma_map_single(device, skb->data, skb_headlen(skb),
+			       DMA_TO_DEVICE);
+
+	titan_ge_eth->tx_skb[curr_desc] = (struct sk_buff *) skb;
+	tx_curr->buffer_len = skb_headlen(skb);
+
+	/* Last descriptor enables interrupt and changes ownership */
+	tx_curr->cmd_sts = 0x1 | (1 << 15) | (1 << 5);
+
+	/* Kick the XDMA to start the transfer from memory to the FIFO */
+	TITAN_GE_WRITE((0x5044 + (port_num << 8)), 0x1);
+
+	/* Current descriptor updated */
+	titan_ge_eth->tx_curr_desc_q = (curr_desc + 1) % TITAN_GE_TX_QUEUE;
+
+	/* Prefetch the next descriptor */
+	prefetch((const void *)
+		 &titan_ge_eth->tx_desc_area[titan_ge_eth->tx_curr_desc_q]);
+}
+
+/*
+ * Actually does the open of the Ethernet device
+ */
+static int titan_ge_eth_open(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned int port_num = titan_ge_eth->port_num;
+	struct device *device = &titan_ge_device[port_num]->dev;
+	unsigned long reg_data;
+	unsigned int phy_reg;
+	int err = 0;
+
+	/* Stop the Rx activity */
+	reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_1 + (port_num << 12));
+	reg_data &= ~(0x00000001);
+	TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_1 + (port_num << 12)), reg_data);
+
+	/* Clear the port interrupts */
+	TITAN_GE_WRITE((TITAN_GE_CHANNEL0_INTERRUPT + (port_num << 8)), 0x0);
+
+	if (config_done == 0) {
+		TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_A, 0);
+		TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_B, 0);
+	}
+
+	/* Set the MAC Address */
+	memcpy(titan_ge_eth->port_mac_addr, netdev->dev_addr, 6);
+
+	if (config_done == 0)
+		titan_port_init(netdev, titan_ge_eth);
+
+	titan_ge_update_afx(titan_ge_eth);
+
+	/* Allocate the Tx ring now */
+	titan_ge_eth->tx_ring_skbs = 0;
+	titan_ge_eth->tx_ring_size = TITAN_GE_TX_QUEUE;
+
+	/* Allocate space in the SRAM for the descriptors */
+	titan_ge_eth->tx_desc_area = (titan_ge_tx_desc *)
+		(titan_ge_sram + TITAN_TX_RING_BYTES * port_num);
+	titan_ge_eth->tx_dma = TITAN_SRAM_BASE + TITAN_TX_RING_BYTES * port_num;
+
+	if (!titan_ge_eth->tx_desc_area) {
+		printk(KERN_ERR
+		       "%s: Cannot allocate Tx Ring (size %d bytes) for port %d\n",
+		       netdev->name, TITAN_TX_RING_BYTES, port_num);
+		return -ENOMEM;
+	}
+
+	memset(titan_ge_eth->tx_desc_area, 0, titan_ge_eth->tx_desc_area_size);
+
+	/* Now initialize the Tx descriptor ring */
+	titan_ge_init_tx_desc_ring(titan_ge_eth,
+				   titan_ge_eth->tx_ring_size,
+				   (unsigned long) titan_ge_eth->tx_desc_area,
+				   (unsigned long) titan_ge_eth->tx_dma);
+
+	/* Allocate the Rx ring now */
+	titan_ge_eth->rx_ring_size = TITAN_GE_RX_QUEUE;
+	titan_ge_eth->rx_ring_skbs = 0;
+
+	titan_ge_eth->rx_desc_area =
+		(titan_ge_rx_desc *)(titan_ge_sram + 0x1000 + TITAN_RX_RING_BYTES * port_num);
+
+	titan_ge_eth->rx_dma = TITAN_SRAM_BASE + 0x1000 + TITAN_RX_RING_BYTES * port_num;
+
+	if (!titan_ge_eth->rx_desc_area) {
+		printk(KERN_ERR "%s: Cannot allocate Rx Ring (size %d bytes)\n",
+		       netdev->name, TITAN_RX_RING_BYTES);
+
+		printk(KERN_ERR "%s: Freeing previously allocated TX queues...",
+		       netdev->name);
+
+		dma_free_coherent(device, titan_ge_eth->tx_desc_area_size,
+				    (void *) titan_ge_eth->tx_desc_area,
+				    titan_ge_eth->tx_dma);
+
+		return -ENOMEM;
+	}
+
+	memset(titan_ge_eth->rx_desc_area, 0, titan_ge_eth->rx_desc_area_size);
+
+	/* Now initialize the Rx ring */
+#ifdef TITAN_GE_JUMBO_FRAMES
+	if ((titan_ge_init_rx_desc_ring
+	    (titan_ge_eth, titan_ge_eth->rx_ring_size, TITAN_GE_JUMBO_BUFSIZE,
+	     (unsigned long) titan_ge_eth->rx_desc_area, 0,
+	      (unsigned long) titan_ge_eth->rx_dma)) == 0)
+#else
+	if ((titan_ge_init_rx_desc_ring
+	     (titan_ge_eth, titan_ge_eth->rx_ring_size, TITAN_GE_STD_BUFSIZE,
+	      (unsigned long) titan_ge_eth->rx_desc_area, 0,
+	      (unsigned long) titan_ge_eth->rx_dma)) == 0)
+#endif
+		panic("%s: Error initializing RX Ring\n", netdev->name);
+
+	/* Fill the Rx ring with the SKBs */
+	titan_ge_port_start(netdev, titan_ge_eth);
+
+	/*
+	 * Check if Interrupt Coalscing needs to be turned on. The
+	 * values specified in the register is multiplied by
+	 * (8 x 64 nanoseconds) to determine when an interrupt should
+	 * be sent to the CPU.
+	 */
+
+	if (TITAN_GE_TX_COAL) {
+		titan_ge_eth->tx_int_coal =
+		    titan_ge_tx_coal(TITAN_GE_TX_COAL, port_num);
+	}
+
+	err = titan_ge_mdio_read(port_num, TITAN_GE_MDIO_PHY_STATUS, &phy_reg);
+	if (err == TITAN_GE_MDIO_ERROR) {
+		printk(KERN_ERR
+		       "Could not read PHY control register 0x11 \n");
+		return TITAN_ERROR;
+	}
+	if (!(phy_reg & 0x0400)) {
+		netif_carrier_off(netdev);
+		netif_stop_queue(netdev);
+		return TITAN_ERROR;
+	} else {
+		netif_carrier_on(netdev);
+		netif_start_queue(netdev);
+	}
+
+	return TITAN_OK;
+}
+
+/*
+ * Queue the packet for Tx. Currently no support for zero copy,
+ * checksum offload and Scatter Gather. The chip does support
+ * Scatter Gather only. But, that wont help here since zero copy
+ * requires support for Tx checksumming also.
+ */
+int titan_ge_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned long flags;
+	struct net_device_stats *stats;
+//printk("titan_ge_start_xmit\n");
+
+	stats = &titan_ge_eth->stats;
+	spin_lock_irqsave(&titan_ge_eth->lock, flags);
+
+	if ((TITAN_GE_TX_QUEUE - titan_ge_eth->tx_ring_skbs) <=
+	    (skb_shinfo(skb)->nr_frags + 1)) {
+		netif_stop_queue(netdev);
+		spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
+		printk(KERN_ERR "Tx OOD \n");
+		return 1;
+	}
+
+	titan_ge_tx_queue(titan_ge_eth, skb);
+	titan_ge_eth->tx_ring_skbs++;
+
+	if (TITAN_GE_TX_QUEUE <= (titan_ge_eth->tx_ring_skbs + 4)) {
+		spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
+		titan_ge_free_tx_queue(titan_ge_eth);
+		spin_lock_irqsave(&titan_ge_eth->lock, flags);
+	}
+
+	stats->tx_bytes += skb->len;
+	stats->tx_packets++;
+
+	spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
+
+	netdev->trans_start = jiffies;
+
+	return 0;
+}
+
+/*
+ * Actually does the Rx. Rx side checksumming supported.
+ */
+static int titan_ge_rx(struct net_device *netdev, int port_num,
+			titan_ge_port_info * titan_ge_port,
+		       titan_ge_packet * packet)
+{
+	int rx_curr_desc, rx_used_desc;
+	volatile titan_ge_rx_desc *rx_desc;
+
+	rx_curr_desc = titan_ge_port->rx_curr_desc_q;
+	rx_used_desc = titan_ge_port->rx_used_desc_q;
+
+	if (((rx_curr_desc + 1) % TITAN_GE_RX_QUEUE) == rx_used_desc)
+		return TITAN_ERROR;
+
+	rx_desc = &(titan_ge_port->rx_desc_area[rx_curr_desc]);
+
+	if (rx_desc->cmd_sts & TITAN_GE_RX_BUFFER_OWNED)
+		return TITAN_ERROR;
+
+	packet->skb = titan_ge_port->rx_skb[rx_curr_desc];
+	packet->len = (rx_desc->cmd_sts & 0x7fff);
+
+	/*
+	 * At this point, we dont know if the checksumming
+	 * actually helps relieve CPU. So, keep it for
+	 * port 0 only
+	 */
+	packet->checksum = ntohs((rx_desc->buffer & 0xffff0000) >> 16);
+	packet->cmd_sts = rx_desc->cmd_sts;
+
+	titan_ge_port->rx_curr_desc_q = (rx_curr_desc + 1) % TITAN_GE_RX_QUEUE;
+
+	/* Prefetch the next descriptor */
+	prefetch((const void *)
+	       &titan_ge_port->rx_desc_area[titan_ge_port->rx_curr_desc_q + 1]);
+
+	return TITAN_OK;
+}
+
+/*
+ * Free the Tx queue of the used SKBs
+ */
+static int titan_ge_free_tx_queue(titan_ge_port_info *titan_ge_eth)
+{
+	unsigned long flags;
+
+	/* Take the lock */
+	spin_lock_irqsave(&(titan_ge_eth->lock), flags);
+
+	while (titan_ge_return_tx_desc(titan_ge_eth, titan_ge_eth->port_num) == 0)
+		if (titan_ge_eth->tx_ring_skbs != 1)
+			titan_ge_eth->tx_ring_skbs--;
+
+	spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
+
+	return TITAN_OK;
+}
+
+/*
+ * Threshold beyond which we do the cleaning of
+ * Tx queue and new allocation for the Rx
+ * queue
+ */
+#define	TX_THRESHOLD	4
+#define	RX_THRESHOLD	10
+
+/*
+ * Receive the packets and send it to the kernel.
+ */
+static int titan_ge_receive_queue(struct net_device *netdev, unsigned int max)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned int port_num = titan_ge_eth->port_num;
+	titan_ge_packet packet;
+	struct net_device_stats *stats;
+	struct sk_buff *skb;
+	unsigned long received_packets = 0;
+	unsigned int ack;
+
+	stats = &titan_ge_eth->stats;
+
+	while ((--max)
+	       && (titan_ge_rx(netdev, port_num, titan_ge_eth, &packet) == TITAN_OK)) {
+		skb = (struct sk_buff *) packet.skb;
+
+		titan_ge_eth->rx_ring_skbs--;
+
+		if (--titan_ge_eth->rx_work_limit < 0)
+			break;
+		received_packets++;
+
+		stats->rx_packets++;
+		stats->rx_bytes += packet.len;
+
+		if ((packet.cmd_sts & TITAN_GE_RX_PERR) ||
+			(packet.cmd_sts & TITAN_GE_RX_OVERFLOW_ERROR) ||
+			(packet.cmd_sts & TITAN_GE_RX_TRUNC) ||
+			(packet.cmd_sts & TITAN_GE_RX_CRC_ERROR)) {
+				stats->rx_dropped++;
+				dev_kfree_skb_any(skb);
+
+				continue;
+		}
+		/*
+		 * Either support fast path or slow path. Decision
+		 * making can really slow down the performance. The
+		 * idea is to cut down the number of checks and improve
+		 * the fastpath.
+		 */
+
+		skb_put(skb, packet.len - 2);
+
+		/*
+		 * Increment data pointer by two since thats where
+		 * the MAC starts
+		 */
+		skb_reserve(skb, 2);
+		skb->protocol = eth_type_trans(skb, netdev);
+		netif_receive_skb(skb);
+
+		if (titan_ge_eth->rx_threshold > RX_THRESHOLD) {
+			ack = titan_ge_rx_task(netdev, titan_ge_eth);
+			TITAN_GE_WRITE((0x5048 + (port_num << 8)), ack);
+			titan_ge_eth->rx_threshold = 0;
+		} else
+			titan_ge_eth->rx_threshold++;
+
+		if (titan_ge_eth->tx_threshold > TX_THRESHOLD) {
+			titan_ge_eth->tx_threshold = 0;
+			titan_ge_free_tx_queue(titan_ge_eth);
+		}
+		else
+			titan_ge_eth->tx_threshold++;
+
+	}
+	return received_packets;
+}
+
+
+/*
+ * Enable the Rx side interrupts
+ */
+static void titan_ge_enable_int(unsigned int port_num,
+			titan_ge_port_info *titan_ge_eth,
+			struct net_device *netdev)
+{
+	unsigned long reg_data = TITAN_GE_READ(TITAN_GE_INTR_XDMA_IE);
+
+	if (port_num == 0)
+		reg_data |= 0x3;
+	if (port_num == 1)
+		reg_data |= 0x300;
+	if (port_num == 2)
+		reg_data |= 0x30000;
+
+	/* Re-enable interrupts */
+	TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, reg_data);
+}
+
+/*
+ * Main function to handle the polling for Rx side NAPI.
+ * Receive interrupts have been disabled at this point.
+ * The poll schedules the transmit followed by receive.
+ */
+static int titan_ge_poll(struct net_device *netdev, int *budget)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	int port_num = titan_ge_eth->port_num;
+	int work_done = 0;
+	unsigned long flags, status;
+
+	titan_ge_eth->rx_work_limit = *budget;
+	if (titan_ge_eth->rx_work_limit > netdev->quota)
+		titan_ge_eth->rx_work_limit = netdev->quota;
+
+	do {
+		/* Do the transmit cleaning work here */
+		titan_ge_free_tx_queue(titan_ge_eth);
+
+		/* Ack the Rx interrupts */
+		if (port_num == 0)
+			TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_A, 0x3);
+		if (port_num == 1)
+			TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_A, 0x300);
+		if (port_num == 2)
+			TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_A, 0x30000);
+
+		work_done += titan_ge_receive_queue(netdev, 0);
+
+		/* Out of quota and there is work to be done */
+		if (titan_ge_eth->rx_work_limit < 0)
+			goto not_done;
+
+		/* Receive alloc_skb could lead to OOM */
+		if (oom_flag == 1) {
+			oom_flag = 0;
+			goto oom;
+		}
+
+		status = TITAN_GE_READ(TITAN_GE_INTR_XDMA_CORE_A);
+	} while (status & 0x30300);
+
+	/* If we are here, then no more interrupts to process */
+	goto done;
+
+not_done:
+	*budget -= work_done;
+	netdev->quota -= work_done;
+	return 1;
+
+oom:
+	printk(KERN_ERR "OOM \n");
+	netif_rx_complete(netdev);
+	return 0;
+
+done:
+	/*
+	 * No more packets on the poll list. Turn the interrupts
+	 * back on and we should be able to catch the new
+	 * packets in the interrupt handler
+	 */
+	if (!work_done)
+		work_done = 1;
+
+	*budget -= work_done;
+	netdev->quota -= work_done;
+
+	spin_lock_irqsave(&titan_ge_eth->lock, flags);
+
+	/* Remove us from the poll list */
+	netif_rx_complete(netdev);
+
+	/* Re-enable interrupts */
+	titan_ge_enable_int(port_num, titan_ge_eth, netdev);
+
+	spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
+
+	return 0;
+}
+
+/*
+ * Close the network device
+ */
+int titan_ge_stop(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+
+	spin_lock_irq(&(titan_ge_eth->lock));
+	titan_ge_eth_stop(netdev);
+	free_irq(netdev->irq, netdev);
+	spin_unlock_irq(&titan_ge_eth->lock);
+
+	return TITAN_OK;
+}
+
+/*
+ * Free the Tx ring
+ */
+static void titan_ge_free_tx_rings(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned int port_num = titan_ge_eth->port_num;
+	unsigned int curr;
+	unsigned long reg_data;
+
+	/* Stop the Tx DMA */
+	reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG +
+				(port_num << 8));
+	reg_data |= 0xc0000000;
+	TITAN_GE_WRITE((TITAN_GE_CHANNEL0_CONFIG +
+			(port_num << 8)), reg_data);
+
+	/* Disable the TMAC */
+	reg_data = TITAN_GE_READ(TITAN_GE_TMAC_CONFIG_1 +
+				(port_num << 12));
+	reg_data &= ~(0x00000001);
+	TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_1 +
+			(port_num << 12)), reg_data);
+
+	for (curr = 0;
+	     (titan_ge_eth->tx_ring_skbs) && (curr < TITAN_GE_TX_QUEUE);
+	     curr++) {
+		if (titan_ge_eth->tx_skb[curr]) {
+			dev_kfree_skb(titan_ge_eth->tx_skb[curr]);
+			titan_ge_eth->tx_ring_skbs--;
+		}
+	}
+
+	if (titan_ge_eth->tx_ring_skbs != 0)
+		printk
+		    ("%s: Error on Tx descriptor free - could not free %d"
+		     " descriptors\n", netdev->name,
+		     titan_ge_eth->tx_ring_skbs);
+
+#ifndef TITAN_RX_RING_IN_SRAM
+	dma_free_coherent(&titan_ge_device[port_num]->dev,
+			  titan_ge_eth->tx_desc_area_size,
+			  (void *) titan_ge_eth->tx_desc_area,
+			  titan_ge_eth->tx_dma);
+#endif
+}
+
+/*
+ * Free the Rx ring
+ */
+static void titan_ge_free_rx_rings(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned int port_num = titan_ge_eth->port_num;
+	unsigned int curr;
+	unsigned long reg_data;
+
+	/* Stop the Rx DMA */
+	reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG +
+				(port_num << 8));
+	reg_data |= 0x000c0000;
+	TITAN_GE_WRITE((TITAN_GE_CHANNEL0_CONFIG +
+			(port_num << 8)), reg_data);
+
+	/* Disable the RMAC */
+	reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_1 +
+				(port_num << 12));
+	reg_data &= ~(0x00000001);
+	TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_1 +
+			(port_num << 12)), reg_data);
+
+	for (curr = 0;
+	     titan_ge_eth->rx_ring_skbs && (curr < TITAN_GE_RX_QUEUE);
+	     curr++) {
+		if (titan_ge_eth->rx_skb[curr]) {
+			dev_kfree_skb(titan_ge_eth->rx_skb[curr]);
+			titan_ge_eth->rx_ring_skbs--;
+		}
+	}
+
+	if (titan_ge_eth->rx_ring_skbs != 0)
+		printk(KERN_ERR
+		       "%s: Error in freeing Rx Ring. %d skb's still"
+		       " stuck in RX Ring - ignoring them\n", netdev->name,
+		       titan_ge_eth->rx_ring_skbs);
+
+#ifndef TITAN_RX_RING_IN_SRAM
+	dma_free_coherent(&titan_ge_device[port_num]->dev,
+			  titan_ge_eth->rx_desc_area_size,
+			  (void *) titan_ge_eth->rx_desc_area,
+			  titan_ge_eth->rx_dma);
+#endif
+}
+
+/*
+ * Actually does the stop of the Ethernet device
+ */
+static void titan_ge_eth_stop(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+
+	netif_stop_queue(netdev);
+
+	titan_ge_port_reset(titan_ge_eth->port_num);
+
+	titan_ge_free_tx_rings(netdev);
+	titan_ge_free_rx_rings(netdev);
+
+	/* Disable the Tx and Rx Interrupts for all channels */
+	TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, 0x0);
+}
+
+/*
+ * Update the MAC address. Note that we have to write the
+ * address in three station registers, 16 bits each. And this
+ * has to be done for TMAC and RMAC
+ */
+static void titan_ge_update_mac_address(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+	unsigned int port_num = titan_ge_eth->port_num;
+	u8 p_addr[6];
+
+	memcpy(titan_ge_eth->port_mac_addr, netdev->dev_addr, 6);
+	memcpy(p_addr, netdev->dev_addr, 6);
+
+	/* Update the Address Filtering Match tables */
+	titan_ge_update_afx(titan_ge_eth);
+
+	printk("Station MAC : %d %d %d %d %d %d  \n",
+		p_addr[5], p_addr[4], p_addr[3],
+		p_addr[2], p_addr[1], p_addr[0]);
+
+	/* Set the MAC address here for TMAC and RMAC */
+	TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_HI + (port_num << 12)),
+		       ((p_addr[5] << 8) | p_addr[4]));
+	TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_MID + (port_num << 12)),
+		       ((p_addr[3] << 8) | p_addr[2]));
+	TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_LOW + (port_num << 12)),
+		       ((p_addr[1] << 8) | p_addr[0]));
+
+	TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_HI + (port_num << 12)),
+		       ((p_addr[5] << 8) | p_addr[4]));
+	TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_MID + (port_num << 12)),
+		       ((p_addr[3] << 8) | p_addr[2]));
+	TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_LOW + (port_num << 12)),
+		       ((p_addr[1] << 8) | p_addr[0]));
+}
+
+/*
+ * Set the MAC address of the Ethernet device
+ */
+static int titan_ge_set_mac_address(struct net_device *dev, void *addr)
+{
+	titan_ge_port_info *tp = netdev_priv(dev);
+	struct sockaddr *sa = addr;
+
+	memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
+
+	spin_lock_irq(&tp->lock);
+	titan_ge_update_mac_address(dev);
+	spin_unlock_irq(&tp->lock);
+
+	return 0;
+}
+
+/*
+ * Get the Ethernet device stats
+ */
+static struct net_device_stats *titan_ge_get_stats(struct net_device *netdev)
+{
+	titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
+
+	return &titan_ge_eth->stats;
+}
+
+/*
+ * Initialize the Rx descriptor ring for the Titan Ge
+ */
+static int titan_ge_init_rx_desc_ring(titan_ge_port_info * titan_eth_port,
+				      int rx_desc_num,
+				      int rx_buff_size,
+				      unsigned long rx_desc_base_addr,
+				      unsigned long rx_buff_base_addr,
+				      unsigned long rx_dma)
+{
+	volatile titan_ge_rx_desc *rx_desc;
+	unsigned long buffer_addr;
+	int index;
+	unsigned long titan_ge_rx_desc_bus = rx_dma;
+
+	buffer_addr = rx_buff_base_addr;
+	rx_desc = (titan_ge_rx_desc *) rx_desc_base_addr;
+
+	/* Check alignment */
+	if (rx_buff_base_addr & 0xF)
+		return 0;
+
+	/* Check Rx buffer size */
+	if ((rx_buff_size < 8) || (rx_buff_size > TITAN_GE_MAX_RX_BUFFER))
+		return 0;
+
+	/* 64-bit alignment
+	if ((rx_buff_base_addr + rx_buff_size) & 0x7)
+		return 0; */
+
+	/* Initialize the Rx desc ring */
+	for (index = 0; index < rx_desc_num; index++) {
+		titan_ge_rx_desc_bus += sizeof(titan_ge_rx_desc);
+		rx_desc[index].cmd_sts = 0;
+		rx_desc[index].buffer_addr = buffer_addr;
+		titan_eth_port->rx_skb[index] = NULL;
+		buffer_addr += rx_buff_size;
+	}
+
+	titan_eth_port->rx_curr_desc_q = 0;
+	titan_eth_port->rx_used_desc_q = 0;
+
+	titan_eth_port->rx_desc_area = (titan_ge_rx_desc *) rx_desc_base_addr;
+	titan_eth_port->rx_desc_area_size =
+	    rx_desc_num * sizeof(titan_ge_rx_desc);
+
+	titan_eth_port->rx_dma = rx_dma;
+
+	return TITAN_OK;
+}
+
+/*
+ * Initialize the Tx descriptor ring. Descriptors in the SRAM
+ */
+static int titan_ge_init_tx_desc_ring(titan_ge_port_info * titan_ge_port,
+				      int tx_desc_num,
+				      unsigned long tx_desc_base_addr,
+				      unsigned long tx_dma)
+{
+	titan_ge_tx_desc *tx_desc;
+	int index;
+	unsigned long titan_ge_tx_desc_bus = tx_dma;
+
+	if (tx_desc_base_addr & 0xF)
+		return 0;
+
+	tx_desc = (titan_ge_tx_desc *) tx_desc_base_addr;
+
+	for (index = 0; index < tx_desc_num; index++) {
+		titan_ge_port->tx_dma_array[index] =
+		    (dma_addr_t) titan_ge_tx_desc_bus;
+		titan_ge_tx_desc_bus += sizeof(titan_ge_tx_desc);
+		tx_desc[index].cmd_sts = 0x0000;
+		tx_desc[index].buffer_len = 0;
+		tx_desc[index].buffer_addr = 0x00000000;
+		titan_ge_port->tx_skb[index] = NULL;
+	}
+
+	titan_ge_port->tx_curr_desc_q = 0;
+	titan_ge_port->tx_used_desc_q = 0;
+
+	titan_ge_port->tx_desc_area = (titan_ge_tx_desc *) tx_desc_base_addr;
+	titan_ge_port->tx_desc_area_size =
+	    tx_desc_num * sizeof(titan_ge_tx_desc);
+
+	titan_ge_port->tx_dma = tx_dma;
+	return TITAN_OK;
+}
+
+/*
+ * Initialize the device as an Ethernet device
+ */
+static int __init titan_ge_probe(struct device *device)
+{
+	titan_ge_port_info *titan_ge_eth;
+	struct net_device *netdev;
+	int port = to_platform_device(device)->id;
+	int err;
+
+	netdev = alloc_etherdev(sizeof(titan_ge_port_info));
+	if (!netdev) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	netdev->open = titan_ge_open;
+	netdev->stop = titan_ge_stop;
+	netdev->hard_start_xmit = titan_ge_start_xmit;
+	netdev->get_stats = titan_ge_get_stats;
+	netdev->set_multicast_list = titan_ge_set_multi;
+	netdev->set_mac_address = titan_ge_set_mac_address;
+
+	/* Tx timeout */
+	netdev->tx_timeout = titan_ge_tx_timeout;
+	netdev->watchdog_timeo = 2 * HZ;
+
+	/* Set these to very high values */
+	netdev->poll = titan_ge_poll;
+	netdev->weight = 64;
+
+	netdev->tx_queue_len = TITAN_GE_TX_QUEUE;
+	netif_carrier_off(netdev);
+	netdev->base_addr = 0;
+
+	netdev->change_mtu = titan_ge_change_mtu;
+
+	titan_ge_eth = netdev_priv(netdev);
+	/* Allocation of memory for the driver structures */
+
+	titan_ge_eth->port_num = port;
+
+	/* Configure the Tx timeout handler */
+	INIT_WORK(&titan_ge_eth->tx_timeout_task,
+		  (void (*)(void *)) titan_ge_tx_timeout_task, netdev);
+
+	spin_lock_init(&titan_ge_eth->lock);
+
+	/* set MAC addresses */
+	memcpy(netdev->dev_addr, titan_ge_mac_addr_base, 6);
+	netdev->dev_addr[5] += port;
+
+	err = register_netdev(netdev);
+
+	if (err)
+		goto out_free_netdev;
+
+	printk(KERN_NOTICE
+	       "%s: port %d with MAC address %02x:%02x:%02x:%02x:%02x:%02x\n",
+	       netdev->name, port, netdev->dev_addr[0],
+	       netdev->dev_addr[1], netdev->dev_addr[2],
+	       netdev->dev_addr[3], netdev->dev_addr[4],
+	       netdev->dev_addr[5]);
+
+	printk(KERN_NOTICE "Rx NAPI supported, Tx Coalescing ON \n");
+
+	return 0;
+
+out_free_netdev:
+	kfree(netdev);
+
+out:
+	return err;
+}
+
+static void __devexit titan_device_remove(struct device *device)
+{
+}
+
+/*
+ * Reset the Ethernet port
+ */
+static void titan_ge_port_reset(unsigned int port_num)
+{
+	unsigned int reg_data;
+
+	/* Stop the Tx port activity */
+	reg_data = TITAN_GE_READ(TITAN_GE_TMAC_CONFIG_1 +
+				(port_num << 12));
+	reg_data &= ~(0x0001);
+	TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_1 +
+			(port_num << 12)), reg_data);
+
+	/* Stop the Rx port activity */
+	reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_1 +
+				(port_num << 12));
+	reg_data &= ~(0x0001);
+	TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_1 +
+			(port_num << 12)), reg_data);
+
+	return;
+}
+
+/*
+ * Return the Tx desc after use by the XDMA
+ */
+static int titan_ge_return_tx_desc(titan_ge_port_info * titan_ge_eth, int port)
+{
+	int tx_desc_used;
+	struct sk_buff *skb;
+
+	tx_desc_used = titan_ge_eth->tx_used_desc_q;
+
+	/* return right away */
+	if (tx_desc_used == titan_ge_eth->tx_curr_desc_q)
+		return TITAN_ERROR;
+
+	/* Now the critical stuff */
+	skb = titan_ge_eth->tx_skb[tx_desc_used];
+
+	dev_kfree_skb_any(skb);
+
+	titan_ge_eth->tx_skb[tx_desc_used] = NULL;
+	titan_ge_eth->tx_used_desc_q =
+	    (tx_desc_used + 1) % TITAN_GE_TX_QUEUE;
+
+	return 0;
+}
+
+/*
+ * Coalescing for the Tx path
+ */
+static unsigned long titan_ge_tx_coal(unsigned long delay, int port)
+{
+	unsigned long rx_delay;
+
+	rx_delay = TITAN_GE_READ(TITAN_GE_INT_COALESCING);
+	delay = (delay << 16) | rx_delay;
+
+	TITAN_GE_WRITE(TITAN_GE_INT_COALESCING, delay);
+	TITAN_GE_WRITE(0x5038, delay);
+
+	return delay;
+}
+
+static struct device_driver titan_soc_driver = {
+	.name   = titan_string,
+	.bus    = &platform_bus_type,
+	.probe  = titan_ge_probe,
+	.remove = __devexit_p(titan_device_remove),
+};
+
+static void titan_platform_release (struct device *device)
+{
+	struct platform_device *pldev;
+
+	/* free device */
+	pldev = to_platform_device (device);
+	kfree (pldev);
+}
+
+/*
+ * Register the Titan GE with the kernel
+ */
+static int __init titan_ge_init_module(void)
+{
+	struct platform_device *pldev;
+	unsigned int version, device;
+	int i;
+
+	printk(KERN_NOTICE
+	       "PMC-Sierra TITAN 10/100/1000 Ethernet Driver \n");
+
+	titan_ge_base = (unsigned long) ioremap(TITAN_GE_BASE, TITAN_GE_SIZE);
+	if (!titan_ge_base) {
+		printk("Mapping Titan GE failed\n");
+		goto out;
+	}
+
+	device = TITAN_GE_READ(TITAN_GE_DEVICE_ID);
+	version = (device & 0x000f0000) >> 16;
+	device &= 0x0000ffff;
+
+	printk(KERN_NOTICE "Device Id : %x,  Version : %x \n", device, version);
+
+#ifdef TITAN_RX_RING_IN_SRAM
+	titan_ge_sram = (unsigned long) ioremap(TITAN_SRAM_BASE,
+						TITAN_SRAM_SIZE);
+	if (!titan_ge_sram) {
+		printk("Mapping Titan SRAM failed\n");
+		goto out_unmap_ge;
+	}
+#endif
+
+	if (driver_register(&titan_soc_driver)) {
+		printk(KERN_ERR "Driver registration failed\n");
+		goto out_unmap_sram;
+	}
+
+	for (i = 0; i < 3; i++) {
+		titan_ge_device[i] = NULL;
+
+		if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL)))
+			continue;
+
+		memset (pldev, 0, sizeof (*pldev));
+		pldev->name		= titan_string;
+		pldev->id		= i;
+		pldev->dev.release	= titan_platform_release;
+		titan_ge_device[i]	= pldev;
+
+		if (platform_device_register (pldev)) {
+			kfree (pldev);
+			titan_ge_device[i] = NULL;
+			continue;
+		}
+
+		if (!pldev->dev.driver) {
+			/*
+			 * The driver was not bound to this device, there was
+			 * no hardware at this address. Unregister it, as the
+			 * release fuction will take care of freeing the
+			 * allocated structure
+			 */
+			titan_ge_device[i] = NULL;
+			platform_device_unregister (pldev);
+		}
+	}
+
+	return 0;
+
+out_unmap_sram:
+	iounmap((void *)titan_ge_sram);
+
+out_unmap_ge:
+	iounmap((void *)titan_ge_base);
+
+out:
+	return -ENOMEM;
+}
+
+/*
+ * Unregister the Titan GE from the kernel
+ */
+static void __exit titan_ge_cleanup_module(void)
+{
+	int i;
+
+	driver_unregister(&titan_soc_driver);
+
+	for (i = 0; i < 3; i++) {
+		if (titan_ge_device[i]) {
+			platform_device_unregister (titan_ge_device[i]);
+			titan_ge_device[i] = NULL;
+		}
+	}
+
+	iounmap((void *)titan_ge_sram);
+	iounmap((void *)titan_ge_base);
+}
+
+MODULE_AUTHOR("Manish Lachwani <lachwani@pmc-sierra.com>");
+MODULE_DESCRIPTION("Titan GE Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_init(titan_ge_init_module);
+module_exit(titan_ge_cleanup_module);
diff -Nur linux-2.6.30.orig/drivers/net/titan_ge.h linux-2.6.30/drivers/net/titan_ge.h
--- linux-2.6.30.orig/drivers/net/titan_ge.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/drivers/net/titan_ge.h	2009-06-14 20:25:20.000000000 +0200
@@ -0,0 +1,415 @@
+#ifndef _TITAN_GE_H_
+#define _TITAN_GE_H_
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <asm/byteorder.h>
+
+/*
+ * These functions should be later moved to a more generic location since there
+ * will be others accessing it also
+ */
+
+/*
+ * This is the way it works: LKB5 Base is at 0x0128. TITAN_BASE is defined in
+ * include/asm/titan_dep.h. TITAN_GE_BASE is the value in the TITAN_GE_LKB5
+ * register.
+ */
+
+#define	TITAN_GE_BASE	0xfe000000UL
+#define	TITAN_GE_SIZE	0x10000UL
+
+extern unsigned long titan_ge_base;
+
+#define	TITAN_GE_WRITE(offset, data) \
+		*(volatile u32 *)(titan_ge_base + (offset)) = (data)
+
+#define TITAN_GE_READ(offset) *(volatile u32 *)(titan_ge_base + (offset))
+
+#ifndef msec_delay
+#define msec_delay(x)   do { if(in_interrupt()) { \
+				/* Don't mdelay in interrupt context! */ \
+				BUG(); \
+			} else { \
+				set_current_state(TASK_UNINTERRUPTIBLE); \
+				schedule_timeout((x * HZ)/1000); \
+			} } while(0)
+#endif
+
+#define TITAN_GE_PORT_0
+
+#define	TITAN_SRAM_BASE		((OCD_READ(RM9000x2_OCD_LKB13) & ~1) << 4)
+#define	TITAN_SRAM_SIZE		0x2000UL
+
+/*
+ * We may need these constants
+ */
+#define TITAN_BIT0    0x00000001
+#define TITAN_BIT1    0x00000002
+#define TITAN_BIT2    0x00000004
+#define TITAN_BIT3    0x00000008
+#define TITAN_BIT4    0x00000010
+#define TITAN_BIT5    0x00000020
+#define TITAN_BIT6    0x00000040
+#define TITAN_BIT7    0x00000080
+#define TITAN_BIT8    0x00000100
+#define TITAN_BIT9    0x00000200
+#define TITAN_BIT10   0x00000400
+#define TITAN_BIT11   0x00000800
+#define TITAN_BIT12   0x00001000
+#define TITAN_BIT13   0x00002000
+#define TITAN_BIT14   0x00004000
+#define TITAN_BIT15   0x00008000
+#define TITAN_BIT16   0x00010000
+#define TITAN_BIT17   0x00020000
+#define TITAN_BIT18   0x00040000
+#define TITAN_BIT19   0x00080000
+#define TITAN_BIT20   0x00100000
+#define TITAN_BIT21   0x00200000
+#define TITAN_BIT22   0x00400000
+#define TITAN_BIT23   0x00800000
+#define TITAN_BIT24   0x01000000
+#define TITAN_BIT25   0x02000000
+#define TITAN_BIT26   0x04000000
+#define TITAN_BIT27   0x08000000
+#define TITAN_BIT28   0x10000000
+#define TITAN_BIT29   0x20000000
+#define TITAN_BIT30   0x40000000
+#define TITAN_BIT31   0x80000000
+
+/* Flow Control */
+#define	TITAN_GE_FC_NONE	0x0
+#define	TITAN_GE_FC_FULL	0x1
+#define	TITAN_GE_FC_TX_PAUSE	0x2
+#define	TITAN_GE_FC_RX_PAUSE	0x3
+
+/* Duplex Settings */
+#define	TITAN_GE_FULL_DUPLEX	0x1
+#define	TITAN_GE_HALF_DUPLEX	0x2
+
+/* Speed settings */
+#define	TITAN_GE_SPEED_1000	0x1
+#define	TITAN_GE_SPEED_100	0x2
+#define	TITAN_GE_SPEED_10	0x3
+
+/* Debugging info only */
+#undef TITAN_DEBUG
+
+/* Keep the rings in the Titan's SSRAM */
+#define TITAN_RX_RING_IN_SRAM
+
+#ifdef CONFIG_64BIT
+#define	TITAN_GE_IE_MASK	0xfffffffffb001b64
+#define	TITAN_GE_IE_STATUS	0xfffffffffb001b60
+#else
+#define	TITAN_GE_IE_MASK	0xfb001b64
+#define	TITAN_GE_IE_STATUS	0xfb001b60
+#endif
+
+/* Support for Jumbo Frames */
+#undef TITAN_GE_JUMBO_FRAMES
+
+/* Rx buffer size */
+#ifdef TITAN_GE_JUMBO_FRAMES
+#define	TITAN_GE_JUMBO_BUFSIZE	9080
+#else
+#define	TITAN_GE_STD_BUFSIZE	1580
+#endif
+
+/*
+ * Tx and Rx Interrupt Coalescing parameter. These values are
+ * for 1 Ghz processor. Rx coalescing can be taken care of
+ * by NAPI. NAPI is adaptive and hence useful. Tx coalescing
+ * is not adaptive. Hence, these values need to be adjusted
+ * based on load, CPU speed etc.
+ */
+#define	TITAN_GE_RX_COAL	150
+#define	TITAN_GE_TX_COAL	300
+
+#if defined(__BIG_ENDIAN)
+
+/* Define the Rx descriptor */
+typedef struct eth_rx_desc {
+	u32     reserved;	/* Unused 		*/
+	u32     buffer_addr;	/* CPU buffer address 	*/
+	u32	cmd_sts;	/* Command and Status	*/
+	u32	buffer;		/* XDMA buffer address	*/
+} titan_ge_rx_desc;
+
+/* Define the Tx descriptor */
+typedef struct eth_tx_desc {
+	u16     cmd_sts;	/* Command, Status and Buffer count */
+	u16	buffer_len;	/* Length of the buffer	*/
+	u32     buffer_addr;	/* Physical address of the buffer */
+} titan_ge_tx_desc;
+
+#elif defined(__LITTLE_ENDIAN)
+
+/* Define the Rx descriptor */
+typedef struct eth_rx_desc {
+	u32	buffer_addr;	/* CPU buffer address   */
+	u32	reserved;	/* Unused               */
+	u32	buffer;		/* XDMA buffer address  */
+	u32	cmd_sts;	/* Command and Status   */
+} titan_ge_rx_desc;
+
+/* Define the Tx descriptor */
+typedef struct eth_tx_desc {
+	u32     buffer_addr;	/* Physical address of the buffer */
+	u16     buffer_len;     /* Length of the buffer */
+	u16     cmd_sts;        /* Command, Status and Buffer count */
+} titan_ge_tx_desc;
+#endif
+
+/* Default Tx Queue Size */
+#define	TITAN_GE_TX_QUEUE	128
+#define TITAN_TX_RING_BYTES	(TITAN_GE_TX_QUEUE * sizeof(struct eth_tx_desc))
+
+/* Default Rx Queue Size */
+#define	TITAN_GE_RX_QUEUE	64
+#define TITAN_RX_RING_BYTES	(TITAN_GE_RX_QUEUE * sizeof(struct eth_rx_desc))
+
+/* Packet Structure */
+typedef struct _pkt_info {
+	unsigned int           len;
+	unsigned int            cmd_sts;
+	unsigned int            buffer;
+	struct sk_buff          *skb;
+	unsigned int		checksum;
+} titan_ge_packet;
+
+
+#define	PHYS_CNT	3
+
+/* Titan Port specific data structure */
+typedef struct _eth_port_ctrl {
+	unsigned int		port_num;
+	u8			port_mac_addr[6];
+
+	/* Rx descriptor pointers */
+	int 			rx_curr_desc_q, rx_used_desc_q;
+
+	/* Tx descriptor pointers */
+	int 			tx_curr_desc_q, tx_used_desc_q;
+
+	/* Rx descriptor area */
+	volatile titan_ge_rx_desc	*rx_desc_area;
+	unsigned int			rx_desc_area_size;
+	struct sk_buff*			rx_skb[TITAN_GE_RX_QUEUE];
+
+	/* Tx Descriptor area */
+	volatile titan_ge_tx_desc	*tx_desc_area;
+	unsigned int                    tx_desc_area_size;
+	struct sk_buff*                 tx_skb[TITAN_GE_TX_QUEUE];
+
+	/* Timeout task */
+	struct work_struct		tx_timeout_task;
+
+	/* DMA structures and handles */
+	dma_addr_t			tx_dma;
+	dma_addr_t			rx_dma;
+	dma_addr_t			tx_dma_array[TITAN_GE_TX_QUEUE];
+
+	/* Device lock */
+	spinlock_t			lock;
+
+	unsigned int			tx_ring_skbs;
+	unsigned int			rx_ring_size;
+	unsigned int			tx_ring_size;
+	unsigned int			rx_ring_skbs;
+
+	struct net_device_stats		stats;
+
+	/* Tx and Rx coalescing */
+	unsigned long			rx_int_coal;
+	unsigned long			tx_int_coal;
+
+	/* Threshold for replenishing the Rx and Tx rings */
+	unsigned int			tx_threshold;
+	unsigned int			rx_threshold;
+
+	/* NAPI work limit */
+	unsigned int			rx_work_limit;
+} titan_ge_port_info;
+
+/* Titan specific constants */
+#define	TITAN_ETH_PORT_IRQ		3
+
+/* Max Rx buffer */
+#define	TITAN_GE_MAX_RX_BUFFER		65536
+
+/* Tx and Rx Error */
+#define	TITAN_GE_ERROR
+
+/* Rx Descriptor Command and Status */
+
+#define	TITAN_GE_RX_CRC_ERROR		TITAN_BIT27	/* crc error */
+#define	TITAN_GE_RX_OVERFLOW_ERROR	TITAN_BIT15	/* overflow */
+#define TITAN_GE_RX_BUFFER_OWNED	TITAN_BIT21	/* buffer ownership */
+#define	TITAN_GE_RX_STP			TITAN_BIT31	/* start of packet */
+#define	TITAN_GE_RX_BAM			TITAN_BIT30	/* broadcast address match */
+#define TITAN_GE_RX_PAM			TITAN_BIT28	/* physical address match */
+#define TITAN_GE_RX_LAFM		TITAN_BIT29	/* logical address filter match */
+#define TITAN_GE_RX_VLAN		TITAN_BIT26	/* virtual lans */
+#define TITAN_GE_RX_PERR		TITAN_BIT19	/* packet error */
+#define TITAN_GE_RX_TRUNC		TITAN_BIT20	/* packet size greater than 32 buffers */
+
+/* Tx Descriptor Command */
+#define	TITAN_GE_TX_BUFFER_OWNED	TITAN_BIT5	/* buffer ownership */
+#define	TITAN_GE_TX_ENABLE_INTERRUPT	TITAN_BIT15	/* Interrupt Enable */
+
+/* Return Status */
+#define	TITAN_OK	0x1	/* Good Status */
+#define	TITAN_ERROR	0x2	/* Error Status */
+
+/* MIB specific register offset */
+#define TITAN_GE_MSTATX_STATS_BASE_LOW       0x0800  /* MSTATX COUNTL[15:0] */
+#define TITAN_GE_MSTATX_STATS_BASE_MID       0x0804  /* MSTATX COUNTM[15:0] */
+#define TITAN_GE_MSTATX_STATS_BASE_HI        0x0808  /* MSTATX COUNTH[7:0] */
+#define TITAN_GE_MSTATX_CONTROL              0x0828  /* MSTATX Control */
+#define TITAN_GE_MSTATX_VARIABLE_SELECT      0x082C  /* MSTATX Variable Select */
+
+/* MIB counter offsets, add to the TITAN_GE_MSTATX_STATS_BASE_XXX */
+#define TITAN_GE_MSTATX_RXFRAMESOK                   0x0040
+#define TITAN_GE_MSTATX_RXOCTETSOK                   0x0050
+#define TITAN_GE_MSTATX_RXFRAMES                     0x0060
+#define TITAN_GE_MSTATX_RXOCTETS                     0x0070
+#define TITAN_GE_MSTATX_RXUNICASTFRAMESOK            0x0080
+#define TITAN_GE_MSTATX_RXBROADCASTFRAMESOK          0x0090
+#define TITAN_GE_MSTATX_RXMULTICASTFRAMESOK          0x00A0
+#define TITAN_GE_MSTATX_RXTAGGEDFRAMESOK             0x00B0
+#define TITAN_GE_MSTATX_RXMACPAUSECONTROLFRAMESOK    0x00C0
+#define TITAN_GE_MSTATX_RXMACCONTROLFRAMESOK         0x00D0
+#define TITAN_GE_MSTATX_RXFCSERROR                   0x00E0
+#define TITAN_GE_MSTATX_RXALIGNMENTERROR             0x00F0
+#define TITAN_GE_MSTATX_RXSYMBOLERROR                0x0100
+#define TITAN_GE_MSTATX_RXLAYER1ERROR                0x0110
+#define TITAN_GE_MSTATX_RXINRANGELENGTHERROR         0x0120
+#define TITAN_GE_MSTATX_RXLONGLENGTHERROR            0x0130
+#define TITAN_GE_MSTATX_RXLONGLENGTHCRCERROR         0x0140
+#define TITAN_GE_MSTATX_RXSHORTLENGTHERROR           0x0150
+#define TITAN_GE_MSTATX_RXSHORTLLENGTHCRCERROR       0x0160
+#define TITAN_GE_MSTATX_RXFRAMES64OCTETS             0x0170
+#define TITAN_GE_MSTATX_RXFRAMES65TO127OCTETS        0x0180
+#define TITAN_GE_MSTATX_RXFRAMES128TO255OCTETS       0x0190
+#define TITAN_GE_MSTATX_RXFRAMES256TO511OCTETS       0x01A0
+#define TITAN_GE_MSTATX_RXFRAMES512TO1023OCTETS      0x01B0
+#define TITAN_GE_MSTATX_RXFRAMES1024TO1518OCTETS     0x01C0
+#define TITAN_GE_MSTATX_RXFRAMES1519TOMAXSIZE        0x01D0
+#define TITAN_GE_MSTATX_RXSTATIONADDRESSFILTERED     0x01E0
+#define TITAN_GE_MSTATX_RXVARIABLE                   0x01F0
+#define TITAN_GE_MSTATX_GENERICADDRESSFILTERED       0x0200
+#define TITAN_GE_MSTATX_UNICASTFILTERED              0x0210
+#define TITAN_GE_MSTATX_MULTICASTFILTERED            0x0220
+#define TITAN_GE_MSTATX_BROADCASTFILTERED            0x0230
+#define TITAN_GE_MSTATX_HASHFILTERED                 0x0240
+#define TITAN_GE_MSTATX_TXFRAMESOK                   0x0250
+#define TITAN_GE_MSTATX_TXOCTETSOK                   0x0260
+#define TITAN_GE_MSTATX_TXOCTETS                     0x0270
+#define TITAN_GE_MSTATX_TXTAGGEDFRAMESOK             0x0280
+#define TITAN_GE_MSTATX_TXMACPAUSECONTROLFRAMESOK    0x0290
+#define TITAN_GE_MSTATX_TXFCSERROR                   0x02A0
+#define TITAN_GE_MSTATX_TXSHORTLENGTHERROR           0x02B0
+#define TITAN_GE_MSTATX_TXLONGLENGTHERROR            0x02C0
+#define TITAN_GE_MSTATX_TXSYSTEMERROR                0x02D0
+#define TITAN_GE_MSTATX_TXMACERROR                   0x02E0
+#define TITAN_GE_MSTATX_TXCARRIERSENSEERROR          0x02F0
+#define TITAN_GE_MSTATX_TXSQETESTERROR               0x0300
+#define TITAN_GE_MSTATX_TXUNICASTFRAMESOK            0x0310
+#define TITAN_GE_MSTATX_TXBROADCASTFRAMESOK          0x0320
+#define TITAN_GE_MSTATX_TXMULTICASTFRAMESOK          0x0330
+#define TITAN_GE_MSTATX_TXUNICASTFRAMESATTEMPTED     0x0340
+#define TITAN_GE_MSTATX_TXBROADCASTFRAMESATTEMPTED   0x0350
+#define TITAN_GE_MSTATX_TXMULTICASTFRAMESATTEMPTED   0x0360
+#define TITAN_GE_MSTATX_TXFRAMES64OCTETS             0x0370
+#define TITAN_GE_MSTATX_TXFRAMES65TO127OCTETS        0x0380
+#define TITAN_GE_MSTATX_TXFRAMES128TO255OCTETS       0x0390
+#define TITAN_GE_MSTATX_TXFRAMES256TO511OCTETS       0x03A0
+#define TITAN_GE_MSTATX_TXFRAMES512TO1023OCTETS      0x03B0
+#define TITAN_GE_MSTATX_TXFRAMES1024TO1518OCTETS     0x03C0
+#define TITAN_GE_MSTATX_TXFRAMES1519TOMAXSIZE        0x03D0
+#define TITAN_GE_MSTATX_TXVARIABLE                   0x03E0
+#define TITAN_GE_MSTATX_RXSYSTEMERROR                0x03F0
+#define TITAN_GE_MSTATX_SINGLECOLLISION              0x0400
+#define TITAN_GE_MSTATX_MULTIPLECOLLISION            0x0410
+#define TITAN_GE_MSTATX_DEFERREDXMISSIONS            0x0420
+#define TITAN_GE_MSTATX_LATECOLLISIONS               0x0430
+#define TITAN_GE_MSTATX_ABORTEDDUETOXSCOLLS          0x0440
+
+/* Interrupt specific defines */
+#define TITAN_GE_DEVICE_ID         0x0000  /* Device ID */
+#define TITAN_GE_RESET             0x0004  /* Reset reg */
+#define TITAN_GE_TSB_CTRL_0        0x000C  /* TSB Control reg 0 */
+#define TITAN_GE_TSB_CTRL_1        0x0010  /* TSB Control reg 1 */
+#define TITAN_GE_INTR_GRP0_STATUS  0x0040  /* General Interrupt Group 0 Status */
+#define TITAN_GE_INTR_XDMA_CORE_A  0x0048  /* XDMA Channel Interrupt Status, Core A*/
+#define TITAN_GE_INTR_XDMA_CORE_B  0x004C  /* XDMA Channel Interrupt Status, Core B*/
+#define	TITAN_GE_INTR_XDMA_IE	   0x0058  /* XDMA Channel Interrupt Enable */
+#define TITAN_GE_SDQPF_ECC_INTR    0x480C  /* SDQPF ECC Interrupt Status */
+#define TITAN_GE_SDQPF_RXFIFO_CTL  0x4828  /* SDQPF RxFifo Control and Interrupt Enb*/
+#define TITAN_GE_SDQPF_RXFIFO_INTR 0x482C  /* SDQPF RxFifo Interrupt Status */
+#define TITAN_GE_SDQPF_TXFIFO_CTL  0x4928  /* SDQPF TxFifo Control and Interrupt Enb*/
+#define TITAN_GE_SDQPF_TXFIFO_INTR 0x492C  /* SDQPF TxFifo Interrupt Status */
+#define	TITAN_GE_SDQPF_RXFIFO_0	   0x4840  /* SDQPF RxFIFO Enable */
+#define	TITAN_GE_SDQPF_TXFIFO_0	   0x4940  /* SDQPF TxFIFO Enable */
+#define TITAN_GE_XDMA_CONFIG       0x5000  /* XDMA Global Configuration */
+#define TITAN_GE_XDMA_INTR_SUMMARY 0x5010  /* XDMA Interrupt Summary */
+#define TITAN_GE_XDMA_BUFADDRPRE   0x5018  /* XDMA Buffer Address Prefix */
+#define TITAN_GE_XDMA_DESCADDRPRE  0x501C  /* XDMA Descriptor Address Prefix */
+#define TITAN_GE_XDMA_PORTWEIGHT   0x502C  /* XDMA Port Weight Configuration */
+
+/* Rx MAC defines */
+#define TITAN_GE_RMAC_CONFIG_1               0x1200  /* RMAC Configuration 1 */
+#define TITAN_GE_RMAC_CONFIG_2               0x1204  /* RMAC Configuration 2 */
+#define TITAN_GE_RMAC_MAX_FRAME_LEN          0x1208  /* RMAC Max Frame Length */
+#define TITAN_GE_RMAC_STATION_HI             0x120C  /* Rx Station Address High */
+#define TITAN_GE_RMAC_STATION_MID            0x1210  /* Rx Station Address Middle */
+#define TITAN_GE_RMAC_STATION_LOW            0x1214  /* Rx Station Address Low */
+#define TITAN_GE_RMAC_LINK_CONFIG            0x1218  /* RMAC Link Configuration */
+
+/* Tx MAC defines */
+#define TITAN_GE_TMAC_CONFIG_1               0x1240  /* TMAC Configuration 1 */
+#define TITAN_GE_TMAC_CONFIG_2               0x1244  /* TMAC Configuration 2 */
+#define TITAN_GE_TMAC_IPG                    0x1248  /* TMAC Inter-Packet Gap */
+#define TITAN_GE_TMAC_STATION_HI             0x124C  /* Tx Station Address High */
+#define TITAN_GE_TMAC_STATION_MID            0x1250  /* Tx Station Address Middle */
+#define TITAN_GE_TMAC_STATION_LOW            0x1254  /* Tx Station Address Low */
+#define TITAN_GE_TMAC_MAX_FRAME_LEN          0x1258  /* TMAC Max Frame Length */
+#define TITAN_GE_TMAC_MIN_FRAME_LEN          0x125C  /* TMAC Min Frame Length */
+#define TITAN_GE_TMAC_PAUSE_FRAME_TIME       0x1260  /* TMAC Pause Frame Time */
+#define TITAN_GE_TMAC_PAUSE_FRAME_INTERVAL   0x1264  /* TMAC Pause Frame Interval */
+
+/* GMII register */
+#define TITAN_GE_GMII_INTERRUPT_STATUS       0x1348  /* GMII Interrupt Status */
+#define TITAN_GE_GMII_CONFIG_GENERAL         0x134C  /* GMII Configuration General */
+#define TITAN_GE_GMII_CONFIG_MODE            0x1350  /* GMII Configuration Mode */
+
+/* Tx and Rx XDMA defines */
+#define	TITAN_GE_INT_COALESCING		     0x5030 /* Interrupt Coalescing */
+#define	TITAN_GE_CHANNEL0_CONFIG	     0x5040 /* Channel 0 XDMA config */
+#define	TITAN_GE_CHANNEL0_INTERRUPT	     0x504c /* Channel 0 Interrupt Status */
+#define	TITAN_GE_GDI_INTERRUPT_ENABLE        0x5050 /* IE for the GDI Errors */
+#define	TITAN_GE_CHANNEL0_PACKET	     0x5060 /* Channel 0 Packet count */
+#define	TITAN_GE_CHANNEL0_BYTE		     0x5064 /* Channel 0 Byte count */
+#define	TITAN_GE_CHANNEL0_TX_DESC	     0x5054 /* Channel 0 Tx first desc */
+#define	TITAN_GE_CHANNEL0_RX_DESC	     0x5058 /* Channel 0 Rx first desc */
+
+/* AFX (Address Filter Exact) register offsets for Slice 0 */
+#define TITAN_GE_AFX_EXACT_MATCH_LOW         0x1100  /* AFX Exact Match Address Low*/
+#define TITAN_GE_AFX_EXACT_MATCH_MID         0x1104  /* AFX Exact Match Address Mid*/
+#define TITAN_GE_AFX_EXACT_MATCH_HIGH        0x1108  /* AFX Exact Match Address Hi */
+#define TITAN_GE_AFX_EXACT_MATCH_VID         0x110C  /* AFX Exact Match VID */
+#define TITAN_GE_AFX_MULTICAST_HASH_LOW      0x1110  /* AFX Multicast HASH Low */
+#define TITAN_GE_AFX_MULTICAST_HASH_MIDLOW   0x1114  /* AFX Multicast HASH MidLow */
+#define TITAN_GE_AFX_MULTICAST_HASH_MIDHI    0x1118  /* AFX Multicast HASH MidHi */
+#define TITAN_GE_AFX_MULTICAST_HASH_HI       0x111C  /* AFX Multicast HASH Hi */
+#define TITAN_GE_AFX_ADDRS_FILTER_CTRL_0     0x1120  /* AFX Address Filter Ctrl 0 */
+#define TITAN_GE_AFX_ADDRS_FILTER_CTRL_1     0x1124  /* AFX Address Filter Ctrl 1 */
+#define TITAN_GE_AFX_ADDRS_FILTER_CTRL_2     0x1128  /* AFX Address Filter Ctrl 2 */
+
+/* Traffic Groomer block */
+#define        TITAN_GE_TRTG_CONFIG	     0x1000  /* TRTG Config */
+
+#endif 				/* _TITAN_GE_H_ */
+
diff -Nur linux-2.6.30.orig/drivers/net/titan_mdio.c linux-2.6.30/drivers/net/titan_mdio.c
--- linux-2.6.30.orig/drivers/net/titan_mdio.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/drivers/net/titan_mdio.c	2009-06-14 20:25:20.000000000 +0200
@@ -0,0 +1,217 @@
+/*
+ * drivers/net/titan_mdio.c - Driver for Titan ethernet ports
+ *
+ * Copyright (C) 2003 PMC-Sierra Inc.
+ * Author : Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * Management Data IO (MDIO) driver for the Titan GMII. Interacts with the Marvel PHY
+ * on the Titan. No support for the TBI as yet.
+ *
+ */
+
+#include	"titan_mdio.h"
+
+#define MDIO_DEBUG
+
+/*
+ * Local constants
+ */
+#define MAX_CLKA            1023
+#define MAX_PHY_DEV         31
+#define MAX_PHY_REG         31
+#define WRITEADDRS_OPCODE   0x0
+#define	READ_OPCODE	    0x2
+#define WRITE_OPCODE        0x1
+#define MAX_MDIO_POLL       100
+
+/*
+ * Titan MDIO and SCMB registers
+ */
+#define TITAN_GE_SCMB_CONTROL                0x01c0  /* SCMB Control */
+#define TITAN_GE_SCMB_CLKA	             0x01c4  /* SCMB Clock A */
+#define TITAN_GE_MDIO_COMMAND                0x01d0  /* MDIO Command */
+#define TITAN_GE_MDIO_DEVICE_PORT_ADDRESS    0x01d4  /* MDIO Device and Port addrs */
+#define TITAN_GE_MDIO_DATA                   0x01d8  /* MDIO Data */
+#define TITAN_GE_MDIO_INTERRUPTS             0x01dC  /* MDIO Interrupts */
+
+/*
+ * Function to poll the MDIO
+ */
+static int titan_ge_mdio_poll(void)
+{
+	int	i, val;
+
+	for (i = 0; i < MAX_MDIO_POLL; i++) {
+		val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_COMMAND);
+
+		if (!(val & 0x8000))
+			return TITAN_GE_MDIO_GOOD;
+	}
+
+	return TITAN_GE_MDIO_ERROR;
+}
+
+
+/*
+ * Initialize and configure the MDIO
+ */
+int titan_ge_mdio_setup(titan_ge_mdio_config *titan_mdio)
+{
+	unsigned long	val;
+
+	/* Reset the SCMB and program into MDIO mode*/
+	TITAN_GE_MDIO_WRITE(TITAN_GE_SCMB_CONTROL, 0x9000);
+	TITAN_GE_MDIO_WRITE(TITAN_GE_SCMB_CONTROL, 0x1000);
+
+	/* CLK A */
+	val = TITAN_GE_MDIO_READ(TITAN_GE_SCMB_CLKA);
+	val = ( (val & ~(0x03ff)) | (titan_mdio->clka & 0x03ff));
+	TITAN_GE_MDIO_WRITE(TITAN_GE_SCMB_CLKA, val);
+
+	/* Preamble Suppresion */
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_COMMAND);
+	val = ( (val & ~(0x0001)) | (titan_mdio->mdio_spre & 0x0001));
+	TITAN_GE_MDIO_WRITE(TITAN_GE_MDIO_COMMAND, val);
+
+	/* MDIO mode */
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_DEVICE_PORT_ADDRESS);
+	val = ( (val & ~(0x4000)) | (titan_mdio->mdio_mode & 0x4000));
+	TITAN_GE_MDIO_WRITE(TITAN_GE_MDIO_DEVICE_PORT_ADDRESS, val);
+
+	return TITAN_GE_MDIO_GOOD;
+}
+
+/*
+ * Set the PHY address in indirect mode
+ */
+int titan_ge_mdio_inaddrs(int dev_addr, int reg_addr)
+{
+	volatile unsigned long	val;
+
+	/* Setup the PHY device */
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_DEVICE_PORT_ADDRESS);
+	val = ( (val & ~(0x1f00)) | ( (dev_addr << 8) & 0x1f00));
+	val = ( (val & ~(0x001f)) | ( reg_addr & 0x001f));
+	TITAN_GE_MDIO_WRITE(TITAN_GE_MDIO_DEVICE_PORT_ADDRESS, val);
+
+	/* Write the new address */
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_COMMAND);
+	val = ( (val & ~(0x0300)) | ( (WRITEADDRS_OPCODE << 8) & 0x0300));
+	TITAN_GE_MDIO_WRITE(TITAN_GE_MDIO_COMMAND, val);
+
+	return TITAN_GE_MDIO_GOOD;
+}
+
+/*
+ * Read the MDIO register. This is what the individual parametes mean:
+ *
+ * dev_addr : PHY ID
+ * reg_addr : register offset
+ *
+ * See the spec for the Titan MAC. We operate in the Direct Mode.
+ */
+
+#define MAX_RETRIES	2
+
+int titan_ge_mdio_read(int dev_addr, int reg_addr, unsigned int *pdata)
+{
+	volatile unsigned long	val;
+	int retries = 0;
+
+	/* Setup the PHY device */
+
+again:
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_DEVICE_PORT_ADDRESS);
+	val = ( (val & ~(0x1f00)) | ( (dev_addr << 8) & 0x1f00));
+	val = ( (val & ~(0x001f)) | ( reg_addr & 0x001f));
+	val |= 0x4000;
+	TITAN_GE_MDIO_WRITE(TITAN_GE_MDIO_DEVICE_PORT_ADDRESS, val);
+
+	udelay(30);
+
+	/* Issue the read command */
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_COMMAND);
+	val = ( (val & ~(0x0300)) | ( (READ_OPCODE << 8) & 0x0300));
+	TITAN_GE_MDIO_WRITE(TITAN_GE_MDIO_COMMAND, val);
+
+	udelay(30);
+
+	if (titan_ge_mdio_poll() != TITAN_GE_MDIO_GOOD)
+		return TITAN_GE_MDIO_ERROR;
+
+	*pdata = (unsigned int)TITAN_GE_MDIO_READ(TITAN_GE_MDIO_DATA);
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_INTERRUPTS);
+
+	udelay(30);
+
+	if (val & 0x2) {
+		if (retries == MAX_RETRIES)
+			return TITAN_GE_MDIO_ERROR;
+		else {
+			retries++;
+			goto again;
+		}
+	}
+
+	return TITAN_GE_MDIO_GOOD;
+}
+
+/*
+ * Write to the MDIO register
+ *
+ * dev_addr : PHY ID
+ * reg_addr : register that needs to be written to
+ *
+ */
+int titan_ge_mdio_write(int dev_addr, int reg_addr, unsigned int data)
+{
+	volatile unsigned long	val;
+
+	if (titan_ge_mdio_poll() != TITAN_GE_MDIO_GOOD)
+		return TITAN_GE_MDIO_ERROR;
+
+	/* Setup the PHY device */
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_DEVICE_PORT_ADDRESS);
+	val = ( (val & ~(0x1f00)) | ( (dev_addr << 8) & 0x1f00));
+	val = ( (val & ~(0x001f)) | ( reg_addr & 0x001f));
+	val |= 0x4000;
+	TITAN_GE_MDIO_WRITE(TITAN_GE_MDIO_DEVICE_PORT_ADDRESS, val);
+
+	udelay(30);
+
+	/* Setup the data to write */
+	TITAN_GE_MDIO_WRITE(TITAN_GE_MDIO_DATA, data);
+
+	udelay(30);
+
+	/* Issue the write command */
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_COMMAND);
+	val = ( (val & ~(0x0300)) | ( (WRITE_OPCODE << 8) & 0x0300));
+	TITAN_GE_MDIO_WRITE(TITAN_GE_MDIO_COMMAND, val);
+
+	udelay(30);
+
+	if (titan_ge_mdio_poll() != TITAN_GE_MDIO_GOOD)
+		return TITAN_GE_MDIO_ERROR;
+
+	val = TITAN_GE_MDIO_READ(TITAN_GE_MDIO_INTERRUPTS);
+	if (val & 0x2)
+		return TITAN_GE_MDIO_ERROR;
+
+	return TITAN_GE_MDIO_GOOD;
+}
+
diff -Nur linux-2.6.30.orig/drivers/net/titan_mdio.h linux-2.6.30/drivers/net/titan_mdio.h
--- linux-2.6.30.orig/drivers/net/titan_mdio.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/drivers/net/titan_mdio.h	2009-06-14 20:25:20.000000000 +0200
@@ -0,0 +1,56 @@
+/*
+ * MDIO used to interact with the PHY when using GMII/MII
+ */
+#ifndef _TITAN_MDIO_H
+#define _TITAN_MDIO_H
+
+#include <linux/netdevice.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include "titan_ge.h"
+
+
+#define	TITAN_GE_MDIO_ERROR	(-9000)
+#define	TITAN_GE_MDIO_GOOD	0
+
+#define	TITAN_GE_MDIO_BASE		titan_ge_base
+
+#define	TITAN_GE_MDIO_READ(offset)	\
+	*(volatile u32 *)(titan_ge_base + (offset))
+
+#define	TITAN_GE_MDIO_WRITE(offset, data)	\
+	*(volatile u32 *)(titan_ge_base + (offset)) = (data)
+
+
+/* GMII specific registers */
+#define	TITAN_GE_MARVEL_PHY_ID		0x00
+#define	TITAN_PHY_AUTONEG_ADV		0x04
+#define	TITAN_PHY_LP_ABILITY		0x05
+#define	TITAN_GE_MDIO_MII_CTRL		0x09
+#define	TITAN_GE_MDIO_MII_EXTENDED	0x0f
+#define	TITAN_GE_MDIO_PHY_CTRL		0x10
+#define	TITAN_GE_MDIO_PHY_STATUS	0x11
+#define	TITAN_GE_MDIO_PHY_IE		0x12
+#define	TITAN_GE_MDIO_PHY_IS		0x13
+#define	TITAN_GE_MDIO_PHY_LED		0x18
+#define	TITAN_GE_MDIO_PHY_LED_OVER	0x19
+#define	PHY_ANEG_TIME_WAIT		45	/* 45 seconds wait time */
+
+/*
+ * MDIO Config Structure
+ */
+typedef struct {
+	unsigned int		clka;
+	int			mdio_spre;
+	int			mdio_mode;
+} titan_ge_mdio_config;
+
+/*
+ * Function Prototypes
+ */
+int titan_ge_mdio_setup(titan_ge_mdio_config *);
+int titan_ge_mdio_inaddrs(int, int);
+int titan_ge_mdio_read(int, int, unsigned int *);
+int titan_ge_mdio_write(int, int, unsigned int);
+
+#endif /* _TITAN_MDIO_H */
diff -Nur linux-2.6.30.orig/drivers/rtc/rtc-cmos.c linux-2.6.30/drivers/rtc/rtc-cmos.c
--- linux-2.6.30.orig/drivers/rtc/rtc-cmos.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/rtc/rtc-cmos.c	2009-06-14 20:25:20.000000000 +0200
@@ -691,7 +691,8 @@
 	 */
 #if	defined(CONFIG_ATARI)
 	address_space = 64;
-#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) || defined(__sparc__)
+#elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \
+			|| defined(__sparc__) || defined(__mips__)
 	address_space = 128;
 #else
 #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes.
@@ -756,9 +757,8 @@
 	/* FIXME teach the alarm code how to handle binary mode;
 	 * <asm-generic/rtc.h> doesn't know 12-hour mode either.
 	 */
-	if (is_valid_irq(rtc_irq) &&
-	    (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY)))) {
-		dev_dbg(dev, "only 24-hr BCD mode supported\n");
+	if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
+		dev_dbg(dev, "only 24-hr supported\n");
 		retval = -ENXIO;
 		goto cleanup1;
 	}
diff -Nur linux-2.6.30.orig/drivers/video/Kconfig linux-2.6.30/drivers/video/Kconfig
--- linux-2.6.30.orig/drivers/video/Kconfig	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/video/Kconfig	2009-06-14 20:25:20.000000000 +0200
@@ -1930,6 +1930,28 @@
 	  Turn on debugging messages. Note that you can set/unset at run time
 	  through sysfs
 
+config FB_SM7XX
+	tristate "Silicon Motion SM7XX Frame Buffer Support"
+	depends on FB
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Frame Buffer driver for the Silicon Motion SM7XX serial graphic card.
+
+config FB_SM7XX_ACCEL
+	bool "Siliconmotion Acceleration functions (EXPERIMENTAL)"
+	depends on FB_SM7XX && EXPERIMENTAL
+	help
+	  This will compile the Trident frame buffer device with
+	  acceleration functions.
+
+config FB_SM7XX_DUALHEAD
+	bool "Siliconmotion dualhead support (EXPERIMENTAL)"
+	depends on FB_SM7XX && EXPERIMENTAL
+	help
+	  This will enable the dualhead support of SM7XX
+
 config FB_SM501
 	tristate "Silicon Motion SM501 framebuffer support"
 	depends on FB && MFD_SM501
diff -Nur linux-2.6.30.orig/drivers/video/Makefile linux-2.6.30/drivers/video/Makefile
--- linux-2.6.30.orig/drivers/video/Makefile	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/drivers/video/Makefile	2009-06-14 20:25:20.000000000 +0200
@@ -70,6 +70,7 @@
 obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
 obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
 obj-$(CONFIG_FB_SGIVW)            += sgivwfb.o
+obj-$(CONFIG_FB_SM7XX)			  += sm7xx/
 obj-$(CONFIG_FB_ACORN)            += acornfb.o
 obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
                                      atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
diff -Nur linux-2.6.30.orig/drivers/video/sm7xx/Makefile linux-2.6.30/drivers/video/sm7xx/Makefile
--- linux-2.6.30.orig/drivers/video/sm7xx/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/drivers/video/sm7xx/Makefile	2009-06-14 20:25:20.000000000 +0200
@@ -0,0 +1,3 @@
+obj-$(CONFIG_FB_SM7XX) += sm7xx.o
+
+sm7xx-y := smtcfb.o
diff -Nur linux-2.6.30.orig/drivers/video/sm7xx/smtc2d.c linux-2.6.30/drivers/video/sm7xx/smtc2d.c
--- linux-2.6.30.orig/drivers/video/sm7xx/smtc2d.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/drivers/video/sm7xx/smtc2d.c	2009-06-14 20:25:20.000000000 +0200
@@ -0,0 +1,979 @@
+/*
+ * smtc2d.c -- Silicon Motion SM7xx 2D drawing engine functions.
+ *
+ * Copyright (C) 2006 Silicon Motion Technology Corp.
+ * Author: Boyod boyod.yang@siliconmotion.com.cn
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ *
+ * Version 0.10.26192.21.01
+ * 	- Add PowerPC support
+ * 	- Add 2D support for Lynx -
+ * Verified on 2.6.19.2
+ * 	Boyod.yang  <boyod.yang@siliconmotion.com.cn>
+ */
+
+unsigned char smtc_de_busy;
+
+void SMTC_write2Dreg(unsigned long nOffset, unsigned long nData)
+{
+	writel(nData, smtc_2DBaseAddress + nOffset);
+}
+
+unsigned long SMTC_read2Dreg(unsigned long nOffset)
+{
+	return readl(smtc_2DBaseAddress + nOffset);
+}
+
+void SMTC_write2Ddataport(unsigned long nOffset, unsigned long nData)
+{
+	writel(nData, smtc_2Ddataport + nOffset);
+}
+
+/**********************************************************************
+ *
+ * deInit
+ *
+ * Purpose
+ *    Drawing engine initialization.
+ *
+ **********************************************************************/
+
+void deInit(unsigned int nModeWidth, unsigned int nModeHeight,
+		unsigned int bpp)
+{
+	/* Get current power configuration. */
+	unsigned char clock;
+	clock = smtc_seqr(0x21);
+
+	/* initialize global 'mutex lock' variable */
+	smtc_de_busy = 0;
+
+	/* Enable 2D Drawing Engine */
+	smtc_seqw(0x21, clock & 0xF8);
+
+	SMTC_write2Dreg(DE_CLIP_TL,
+			FIELD_VALUE(0, DE_CLIP_TL, TOP, 0) |
+			FIELD_SET(0, DE_CLIP_TL, STATUS, DISABLE) |
+			FIELD_SET(0, DE_CLIP_TL, INHIBIT, OUTSIDE) |
+			FIELD_VALUE(0, DE_CLIP_TL, LEFT, 0));
+
+	if (bpp >= 24) {
+		SMTC_write2Dreg(DE_PITCH,
+				FIELD_VALUE(0, DE_PITCH, DESTINATION,
+					    nModeWidth * 3) | FIELD_VALUE(0,
+								  DE_PITCH,
+								  SOURCE,
+								  nModeWidth
+								  * 3));
+	} else {
+		SMTC_write2Dreg(DE_PITCH,
+				FIELD_VALUE(0, DE_PITCH, DESTINATION,
+					    nModeWidth) | FIELD_VALUE(0,
+							      DE_PITCH,
+							      SOURCE,
+							      nModeWidth));
+	}
+
+	SMTC_write2Dreg(DE_WINDOW_WIDTH,
+			FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION,
+				    nModeWidth) | FIELD_VALUE(0,
+							      DE_WINDOW_WIDTH,
+							      SOURCE,
+							      nModeWidth));
+
+	switch (bpp) {
+	case 8:
+		SMTC_write2Dreg(DE_STRETCH_FORMAT,
+				FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY,
+					  NORMAL) | FIELD_VALUE(0,
+							DE_STRETCH_FORMAT,
+							PATTERN_Y,
+							0) |
+				FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X,
+				    0) | FIELD_SET(0, DE_STRETCH_FORMAT,
+						   PIXEL_FORMAT,
+						   8) | FIELD_SET(0,
+							  DE_STRETCH_FORMAT,
+							  ADDRESSING,
+							  XY) |
+				FIELD_VALUE(0, DE_STRETCH_FORMAT,
+					SOURCE_HEIGHT, 3));
+		break;
+	case 24:
+		SMTC_write2Dreg(DE_STRETCH_FORMAT,
+				FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY,
+					  NORMAL) | FIELD_VALUE(0,
+							DE_STRETCH_FORMAT,
+							PATTERN_Y,
+							0) |
+				FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X,
+				    0) | FIELD_SET(0, DE_STRETCH_FORMAT,
+							   PIXEL_FORMAT,
+							   24) | FIELD_SET(0,
+							   DE_STRETCH_FORMAT,
+							   ADDRESSING,
+							   XY) |
+				FIELD_VALUE(0, DE_STRETCH_FORMAT,
+					SOURCE_HEIGHT, 3));
+		break;
+	case 16:
+	default:
+		SMTC_write2Dreg(DE_STRETCH_FORMAT,
+				FIELD_SET(0, DE_STRETCH_FORMAT, PATTERN_XY,
+					  NORMAL) | FIELD_VALUE(0,
+							DE_STRETCH_FORMAT,
+							PATTERN_Y,
+							0) |
+				FIELD_VALUE(0, DE_STRETCH_FORMAT, PATTERN_X,
+				    0) | FIELD_SET(0, DE_STRETCH_FORMAT,
+							   PIXEL_FORMAT,
+							   16) | FIELD_SET(0,
+							   DE_STRETCH_FORMAT,
+							   ADDRESSING,
+							   XY) |
+				FIELD_VALUE(0, DE_STRETCH_FORMAT,
+					SOURCE_HEIGHT, 3));
+		break;
+	}
+
+	SMTC_write2Dreg(DE_MASKS,
+			FIELD_VALUE(0, DE_MASKS, BYTE_MASK, 0xFFFF) |
+			FIELD_VALUE(0, DE_MASKS, BIT_MASK, 0xFFFF));
+	SMTC_write2Dreg(DE_COLOR_COMPARE_MASK,
+			FIELD_VALUE(0, DE_COLOR_COMPARE_MASK, MASKS, \
+				0xFFFFFF));
+	SMTC_write2Dreg(DE_COLOR_COMPARE,
+			FIELD_VALUE(0, DE_COLOR_COMPARE, COLOR, 0xFFFFFF));
+}
+
+void deVerticalLine(unsigned long dst_base,
+		    unsigned long dst_pitch,
+		    unsigned long nX,
+		    unsigned long nY,
+		    unsigned long dst_height, unsigned long nColor)
+{
+	deWaitForNotBusy();
+
+	SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE,
+			FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS,
+				    dst_base));
+
+	SMTC_write2Dreg(DE_PITCH,
+			FIELD_VALUE(0, DE_PITCH, DESTINATION, dst_pitch) |
+			FIELD_VALUE(0, DE_PITCH, SOURCE, dst_pitch));
+
+	SMTC_write2Dreg(DE_WINDOW_WIDTH,
+			FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION,
+			    dst_pitch) | FIELD_VALUE(0, DE_WINDOW_WIDTH,
+						     SOURCE,
+						     dst_pitch));
+
+	SMTC_write2Dreg(DE_FOREGROUND,
+			FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor));
+
+	SMTC_write2Dreg(DE_DESTINATION,
+			FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) |
+			FIELD_VALUE(0, DE_DESTINATION, X, nX) |
+			FIELD_VALUE(0, DE_DESTINATION, Y, nY));
+
+	SMTC_write2Dreg(DE_DIMENSION,
+			FIELD_VALUE(0, DE_DIMENSION, X, 1) |
+			FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height));
+
+	SMTC_write2Dreg(DE_CONTROL,
+			FIELD_SET(0, DE_CONTROL, STATUS, START) |
+			FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) |
+			FIELD_SET(0, DE_CONTROL, MAJOR, Y) |
+			FIELD_SET(0, DE_CONTROL, STEP_X, NEGATIVE) |
+			FIELD_SET(0, DE_CONTROL, STEP_Y, POSITIVE) |
+			FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) |
+			FIELD_SET(0, DE_CONTROL, COMMAND, SHORT_STROKE) |
+			FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
+			FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C));
+
+	smtc_de_busy = 1;
+}
+
+void deHorizontalLine(unsigned long dst_base,
+		      unsigned long dst_pitch,
+		      unsigned long nX,
+		      unsigned long nY,
+		      unsigned long dst_width, unsigned long nColor)
+{
+	deWaitForNotBusy();
+
+	SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE,
+			FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS,
+				    dst_base));
+
+	SMTC_write2Dreg(DE_PITCH,
+			FIELD_VALUE(0, DE_PITCH, DESTINATION, dst_pitch) |
+			FIELD_VALUE(0, DE_PITCH, SOURCE, dst_pitch));
+
+	SMTC_write2Dreg(DE_WINDOW_WIDTH,
+			FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION,
+			    dst_pitch) | FIELD_VALUE(0, DE_WINDOW_WIDTH,
+						     SOURCE,
+						     dst_pitch));
+	SMTC_write2Dreg(DE_FOREGROUND,
+			FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor));
+	SMTC_write2Dreg(DE_DESTINATION,
+			FIELD_SET(0, DE_DESTINATION, WRAP,
+			  DISABLE) | FIELD_VALUE(0, DE_DESTINATION, X,
+						 nX) | FIELD_VALUE(0,
+							   DE_DESTINATION,
+							   Y,
+							   nY));
+	SMTC_write2Dreg(DE_DIMENSION,
+			FIELD_VALUE(0, DE_DIMENSION, X,
+			    dst_width) | FIELD_VALUE(0, DE_DIMENSION,
+						     Y_ET, 1));
+	SMTC_write2Dreg(DE_CONTROL,
+		FIELD_SET(0, DE_CONTROL, STATUS, START) | FIELD_SET(0,
+							    DE_CONTROL,
+							    DIRECTION,
+							    RIGHT_TO_LEFT)
+		| FIELD_SET(0, DE_CONTROL, MAJOR, X) | FIELD_SET(0,
+							 DE_CONTROL,
+							 STEP_X,
+							 POSITIVE)
+		| FIELD_SET(0, DE_CONTROL, STEP_Y,
+			    NEGATIVE) | FIELD_SET(0, DE_CONTROL,
+						  LAST_PIXEL,
+						  OFF) | FIELD_SET(0,
+							   DE_CONTROL,
+							   COMMAND,
+							   SHORT_STROKE)
+		| FIELD_SET(0, DE_CONTROL, ROP_SELECT,
+			    ROP2) | FIELD_VALUE(0, DE_CONTROL, ROP,
+						0x0C));
+
+	smtc_de_busy = 1;
+}
+
+void deLine(unsigned long dst_base,
+	    unsigned long dst_pitch,
+	    unsigned long nX1,
+	    unsigned long nY1,
+	    unsigned long nX2, unsigned long nY2, unsigned long nColor)
+{
+	unsigned long nCommand =
+	    FIELD_SET(0, DE_CONTROL, STATUS, START) |
+	    FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) |
+	    FIELD_SET(0, DE_CONTROL, MAJOR, X) |
+	    FIELD_SET(0, DE_CONTROL, STEP_X, POSITIVE) |
+	    FIELD_SET(0, DE_CONTROL, STEP_Y, POSITIVE) |
+	    FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) |
+	    FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
+	    FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C);
+	unsigned long DeltaX;
+	unsigned long DeltaY;
+
+	/* Calculate delta X */
+	if (nX1 <= nX2)
+		DeltaX = nX2 - nX1;
+	else {
+		DeltaX = nX1 - nX2;
+		nCommand = FIELD_SET(nCommand, DE_CONTROL, STEP_X, NEGATIVE);
+	}
+
+	/* Calculate delta Y */
+	if (nY1 <= nY2)
+		DeltaY = nY2 - nY1;
+	else {
+		DeltaY = nY1 - nY2;
+		nCommand = FIELD_SET(nCommand, DE_CONTROL, STEP_Y, NEGATIVE);
+	}
+
+	/* Determine the major axis */
+	if (DeltaX < DeltaY)
+		nCommand = FIELD_SET(nCommand, DE_CONTROL, MAJOR, Y);
+
+	/* Vertical line? */
+	if (nX1 == nX2)
+		deVerticalLine(dst_base, dst_pitch, nX1, nY1, DeltaY, nColor);
+
+	/* Horizontal line? */
+	else if (nY1 == nY2)
+		deHorizontalLine(dst_base, dst_pitch, nX1, nY1, \
+				DeltaX, nColor);
+
+	/* Diagonal line? */
+	else if (DeltaX == DeltaY) {
+		deWaitForNotBusy();
+
+		SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE,
+				FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE,
+					    ADDRESS, dst_base));
+
+		SMTC_write2Dreg(DE_PITCH,
+				FIELD_VALUE(0, DE_PITCH, DESTINATION,
+					    dst_pitch) | FIELD_VALUE(0,
+							     DE_PITCH,
+							     SOURCE,
+							     dst_pitch));
+
+		SMTC_write2Dreg(DE_WINDOW_WIDTH,
+				FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION,
+					    dst_pitch) | FIELD_VALUE(0,
+							     DE_WINDOW_WIDTH,
+							     SOURCE,
+							     dst_pitch));
+
+		SMTC_write2Dreg(DE_FOREGROUND,
+				FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor));
+
+		SMTC_write2Dreg(DE_DESTINATION,
+				FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) |
+				FIELD_VALUE(0, DE_DESTINATION, X, 1) |
+				FIELD_VALUE(0, DE_DESTINATION, Y, nY1));
+
+		SMTC_write2Dreg(DE_DIMENSION,
+				FIELD_VALUE(0, DE_DIMENSION, X, 1) |
+				FIELD_VALUE(0, DE_DIMENSION, Y_ET, DeltaX));
+
+		SMTC_write2Dreg(DE_CONTROL,
+				FIELD_SET(nCommand, DE_CONTROL, COMMAND,
+					  SHORT_STROKE));
+	}
+
+	/* Generic line */
+	else {
+		unsigned int k1, k2, et, w;
+		if (DeltaX < DeltaY) {
+			k1 = 2 * DeltaX;
+			et = k1 - DeltaY;
+			k2 = et - DeltaY;
+			w = DeltaY + 1;
+		} else {
+			k1 = 2 * DeltaY;
+			et = k1 - DeltaX;
+			k2 = et - DeltaX;
+			w = DeltaX + 1;
+		}
+
+		deWaitForNotBusy();
+
+		SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE,
+				FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE,
+					    ADDRESS, dst_base));
+
+		SMTC_write2Dreg(DE_PITCH,
+				FIELD_VALUE(0, DE_PITCH, DESTINATION,
+					    dst_pitch) | FIELD_VALUE(0,
+							     DE_PITCH,
+							     SOURCE,
+							     dst_pitch));
+
+		SMTC_write2Dreg(DE_WINDOW_WIDTH,
+				FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION,
+					    dst_pitch) | FIELD_VALUE(0,
+							     DE_WINDOW_WIDTH,
+							     SOURCE,
+							     dst_pitch));
+
+		SMTC_write2Dreg(DE_FOREGROUND,
+				FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor));
+
+		SMTC_write2Dreg(DE_SOURCE,
+				FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) |
+				FIELD_VALUE(0, DE_SOURCE, X_K1, k1) |
+				FIELD_VALUE(0, DE_SOURCE, Y_K2, k2));
+
+		SMTC_write2Dreg(DE_DESTINATION,
+				FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) |
+				FIELD_VALUE(0, DE_DESTINATION, X, nX1) |
+				FIELD_VALUE(0, DE_DESTINATION, Y, nY1));
+
+		SMTC_write2Dreg(DE_DIMENSION,
+				FIELD_VALUE(0, DE_DIMENSION, X, w) |
+				FIELD_VALUE(0, DE_DIMENSION, Y_ET, et));
+
+		SMTC_write2Dreg(DE_CONTROL,
+				FIELD_SET(nCommand, DE_CONTROL, COMMAND,
+					  LINE_DRAW));
+	}
+
+	smtc_de_busy = 1;
+}
+
+void deFillRect(unsigned long dst_base,
+		unsigned long dst_pitch,
+		unsigned long dst_X,
+		unsigned long dst_Y,
+		unsigned long dst_width,
+		unsigned long dst_height, unsigned long nColor)
+{
+	deWaitForNotBusy();
+
+	SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE,
+			FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS,
+				    dst_base));
+
+	if (dst_pitch) {
+		SMTC_write2Dreg(DE_PITCH,
+				FIELD_VALUE(0, DE_PITCH, DESTINATION,
+					    dst_pitch) | FIELD_VALUE(0,
+							     DE_PITCH,
+							     SOURCE,
+							     dst_pitch));
+
+		SMTC_write2Dreg(DE_WINDOW_WIDTH,
+				FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION,
+					    dst_pitch) | FIELD_VALUE(0,
+							     DE_WINDOW_WIDTH,
+							     SOURCE,
+							     dst_pitch));
+	}
+
+	SMTC_write2Dreg(DE_FOREGROUND,
+			FIELD_VALUE(0, DE_FOREGROUND, COLOR, nColor));
+
+	SMTC_write2Dreg(DE_DESTINATION,
+			FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) |
+			FIELD_VALUE(0, DE_DESTINATION, X, dst_X) |
+			FIELD_VALUE(0, DE_DESTINATION, Y, dst_Y));
+
+	SMTC_write2Dreg(DE_DIMENSION,
+			FIELD_VALUE(0, DE_DIMENSION, X, dst_width) |
+			FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height));
+
+	SMTC_write2Dreg(DE_CONTROL,
+			FIELD_SET(0, DE_CONTROL, STATUS, START) |
+			FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT) |
+			FIELD_SET(0, DE_CONTROL, LAST_PIXEL, OFF) |
+			FIELD_SET(0, DE_CONTROL, COMMAND, RECTANGLE_FILL) |
+			FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
+			FIELD_VALUE(0, DE_CONTROL, ROP, 0x0C));
+
+	smtc_de_busy = 1;
+}
+
+/**********************************************************************
+ *
+ * deRotatePattern
+ *
+ * Purpose
+ *    Rotate the given pattern if necessary
+ *
+ * Parameters
+ *    [in]
+ *	   pPattern  - Pointer to DE_SURFACE structure containing
+ *		       pattern attributes
+ *	   patternX  - X position (0-7) of pattern origin
+ *	   patternY  - Y position (0-7) of pattern origin
+ *
+ *    [out]
+ *	   pattern_dstaddr - Pointer to pre-allocated buffer containing
+ *	   rotated pattern
+ *
+ **********************************************************************/
+void deRotatePattern(unsigned char *pattern_dstaddr,
+		     unsigned long pattern_src_addr,
+		     unsigned long pattern_BPP,
+		     unsigned long pattern_stride, int patternX, int patternY)
+{
+	unsigned int i;
+	unsigned long pattern[PATTERN_WIDTH * PATTERN_HEIGHT];
+	unsigned int x, y;
+	unsigned char *pjPatByte;
+
+	if (pattern_dstaddr != NULL) {
+		deWaitForNotBusy();
+
+		if (patternX || patternY) {
+			/* Rotate pattern */
+			pjPatByte = (unsigned char *)pattern;
+
+			switch (pattern_BPP) {
+			case 8:
+				{
+					for (y = 0; y < 8; y++) {
+						unsigned char *pjBuffer =
+						    pattern_dstaddr +
+						    ((patternY + y) & 7) * 8;
+						for (x = 0; x < 8; x++) {
+							pjBuffer[(patternX +
+								  x) & 7] =
+							    pjPatByte[x];
+						}
+						pjPatByte += pattern_stride;
+					}
+					break;
+				}
+
+			case 16:
+				{
+					for (y = 0; y < 8; y++) {
+						unsigned short *pjBuffer =
+						    (unsigned short *)
+						    pattern_dstaddr +
+						    ((patternY + y) & 7) * 8;
+						for (x = 0; x < 8; x++) {
+							pjBuffer[(patternX +
+								  x) & 7] =
+							    ((unsigned short *)
+							     pjPatByte)[x];
+						}
+						pjPatByte += pattern_stride;
+					}
+					break;
+				}
+
+			case 32:
+				{
+					for (y = 0; y < 8; y++) {
+						unsigned long *pjBuffer =
+						    (unsigned long *)
+						    pattern_dstaddr +
+						    ((patternY + y) & 7) * 8;
+						for (x = 0; x < 8; x++) {
+							pjBuffer[(patternX +
+								  x) & 7] =
+							    ((unsigned long *)
+							     pjPatByte)[x];
+						}
+						pjPatByte += pattern_stride;
+					}
+					break;
+				}
+			}
+		} else {
+			/*Don't rotate,just copy pattern into pattern_dstaddr*/
+			for (i = 0; i < (pattern_BPP * 2); i++) {
+				((unsigned long *)pattern_dstaddr)[i] =
+				    pattern[i];
+			}
+		}
+
+	}
+}
+
+/**********************************************************************
+ *
+ * deCopy
+ *
+ * Purpose
+ *    Copy a rectangular area of the source surface to a destination surface
+ *
+ * Remarks
+ *    Source bitmap must have the same color depth (BPP) as the destination
+ *    bitmap.
+ *
+**********************************************************************/
+void deCopy(unsigned long dst_base,
+	    unsigned long dst_pitch,
+	    unsigned long dst_BPP,
+	    unsigned long dst_X,
+	    unsigned long dst_Y,
+	    unsigned long dst_width,
+	    unsigned long dst_height,
+	    unsigned long src_base,
+	    unsigned long src_pitch,
+	    unsigned long src_X,
+	    unsigned long src_Y, pTransparent pTransp, unsigned char nROP2)
+{
+	unsigned long nDirection = 0;
+	unsigned long nTransparent = 0;
+	/* Direction of ROP2 operation:
+	 * 1 = Left to Right,
+	 * (-1) = Right to Left
+	 */
+	unsigned long opSign = 1;
+	/* xWidth is in pixels */
+	unsigned long xWidth = 192 / (dst_BPP / 8);
+	unsigned long de_ctrl = 0;
+
+	deWaitForNotBusy();
+
+	SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE,
+			FIELD_VALUE(0, DE_WINDOW_DESTINATION_BASE, ADDRESS,
+				    dst_base));
+
+	SMTC_write2Dreg(DE_WINDOW_SOURCE_BASE,
+			FIELD_VALUE(0, DE_WINDOW_SOURCE_BASE, ADDRESS,
+				    src_base));
+
+	if (dst_pitch && src_pitch) {
+		SMTC_write2Dreg(DE_PITCH,
+			FIELD_VALUE(0, DE_PITCH, DESTINATION,
+				    dst_pitch) | FIELD_VALUE(0,
+						     DE_PITCH,
+						     SOURCE,
+						     src_pitch));
+
+		SMTC_write2Dreg(DE_WINDOW_WIDTH,
+			FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION,
+				    dst_pitch) | FIELD_VALUE(0,
+						     DE_WINDOW_WIDTH,
+						     SOURCE,
+						     src_pitch));
+	}
+
+	/* Set transparent bits if necessary */
+	if (pTransp != NULL) {
+		nTransparent =
+		    pTransp->match | pTransp->select | pTransp->control;
+
+		/* Set color compare register */
+		SMTC_write2Dreg(DE_COLOR_COMPARE,
+				FIELD_VALUE(0, DE_COLOR_COMPARE, COLOR,
+					    pTransp->color));
+	}
+
+	/* Determine direction of operation */
+	if (src_Y < dst_Y) {
+		/* +----------+
+		   |S         |
+		   |          +----------+
+		   |          |      |   |
+		   |          |      |   |
+		   +---|------+      |
+		   |               D |
+		   +----------+ */
+
+		nDirection = BOTTOM_TO_TOP;
+	} else if (src_Y > dst_Y) {
+		/* +----------+
+		   |D         |
+		   |          +----------+
+		   |          |      |   |
+		   |          |      |   |
+		   +---|------+      |
+		   |               S |
+		   +----------+ */
+
+		nDirection = TOP_TO_BOTTOM;
+	} else {
+		/* src_Y == dst_Y */
+
+		if (src_X <= dst_X) {
+			/* +------+---+------+
+			   |S     |   |     D|
+			   |      |   |      |
+			   |      |   |      |
+			   |      |   |      |
+			   +------+---+------+ */
+
+			nDirection = RIGHT_TO_LEFT;
+		} else {
+			/* src_X > dst_X */
+
+			/* +------+---+------+
+			   |D     |   |     S|
+			   |      |   |      |
+			   |      |   |      |
+			   |      |   |      |
+			   +------+---+------+ */
+
+			nDirection = LEFT_TO_RIGHT;
+		}
+	}
+
+	if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT)) {
+		src_X += dst_width - 1;
+		src_Y += dst_height - 1;
+		dst_X += dst_width - 1;
+		dst_Y += dst_height - 1;
+		opSign = (-1);
+	}
+
+	if (dst_BPP >= 24) {
+		src_X *= 3;
+		src_Y *= 3;
+		dst_X *= 3;
+		dst_Y *= 3;
+		dst_width *= 3;
+		if ((nDirection == BOTTOM_TO_TOP)
+		    || (nDirection == RIGHT_TO_LEFT)) {
+			src_X += 2;
+			dst_X += 2;
+		}
+	}
+
+	/* Workaround for 192 byte hw bug */
+	if ((nROP2 != 0x0C) && ((dst_width * (dst_BPP / 8)) >= 192)) {
+		/*
+		 * Perform the ROP2 operation in chunks of (xWidth *
+		 * dst_height)
+		 */
+		while (1) {
+			deWaitForNotBusy();
+
+			SMTC_write2Dreg(DE_SOURCE,
+				FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) |
+				FIELD_VALUE(0, DE_SOURCE, X_K1, src_X) |
+				FIELD_VALUE(0, DE_SOURCE, Y_K2, src_Y));
+
+			SMTC_write2Dreg(DE_DESTINATION,
+				FIELD_SET(0, DE_DESTINATION, WRAP,
+				  DISABLE) | FIELD_VALUE(0,
+							 DE_DESTINATION,
+							 X,
+							 dst_X)
+			| FIELD_VALUE(0, DE_DESTINATION, Y,
+						      dst_Y));
+
+			SMTC_write2Dreg(DE_DIMENSION,
+				FIELD_VALUE(0, DE_DIMENSION, X,
+				    xWidth) | FIELD_VALUE(0,
+							  DE_DIMENSION,
+							  Y_ET,
+							  dst_height));
+
+			de_ctrl =
+			    FIELD_VALUE(0, DE_CONTROL, ROP,
+				nROP2) | nTransparent | FIELD_SET(0,
+							  DE_CONTROL,
+							  ROP_SELECT,
+							  ROP2)
+			    | FIELD_SET(0, DE_CONTROL, COMMAND,
+				BITBLT) | ((nDirection ==
+					    1) ? FIELD_SET(0,
+						   DE_CONTROL,
+						   DIRECTION,
+						   RIGHT_TO_LEFT)
+					   : FIELD_SET(0, DE_CONTROL,
+					       DIRECTION,
+					       LEFT_TO_RIGHT)) |
+			    FIELD_SET(0, DE_CONTROL, STATUS, START);
+
+			SMTC_write2Dreg(DE_CONTROL, de_ctrl);
+
+			src_X += (opSign * xWidth);
+			dst_X += (opSign * xWidth);
+			dst_width -= xWidth;
+
+			if (dst_width <= 0) {
+				/* ROP2 operation is complete */
+				break;
+			}
+
+			if (xWidth > dst_width)
+				xWidth = dst_width;
+		}
+	} else {
+		deWaitForNotBusy();
+		SMTC_write2Dreg(DE_SOURCE,
+			FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) |
+			FIELD_VALUE(0, DE_SOURCE, X_K1, src_X) |
+			FIELD_VALUE(0, DE_SOURCE, Y_K2, src_Y));
+
+		SMTC_write2Dreg(DE_DESTINATION,
+			FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) |
+			FIELD_VALUE(0, DE_DESTINATION, X, dst_X) |
+			FIELD_VALUE(0, DE_DESTINATION, Y, dst_Y));
+
+		SMTC_write2Dreg(DE_DIMENSION,
+			FIELD_VALUE(0, DE_DIMENSION, X, dst_width) |
+			FIELD_VALUE(0, DE_DIMENSION, Y_ET, dst_height));
+
+		de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, nROP2) |
+		    nTransparent |
+		    FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
+		    FIELD_SET(0, DE_CONTROL, COMMAND, BITBLT) |
+		    ((nDirection == 1) ? FIELD_SET(0, DE_CONTROL, DIRECTION,
+						   RIGHT_TO_LEFT)
+		     : FIELD_SET(0, DE_CONTROL, DIRECTION,
+				 LEFT_TO_RIGHT)) | FIELD_SET(0, DE_CONTROL,
+							     STATUS, START);
+		SMTC_write2Dreg(DE_CONTROL, de_ctrl);
+	}
+
+	smtc_de_busy = 1;
+}
+
+/*
+ * This function sets the pixel format that will apply to the 2D Engine.
+ */
+void deSetPixelFormat(unsigned long bpp)
+{
+	unsigned long de_format;
+
+	de_format = SMTC_read2Dreg(DE_STRETCH_FORMAT);
+
+	switch (bpp) {
+	case 8:
+		de_format =
+		    FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 8);
+		break;
+	default:
+	case 16:
+		de_format =
+		    FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 16);
+		break;
+	case 32:
+		de_format =
+		    FIELD_SET(de_format, DE_STRETCH_FORMAT, PIXEL_FORMAT, 32);
+		break;
+	}
+
+	SMTC_write2Dreg(DE_STRETCH_FORMAT, de_format);
+}
+
+/*
+ * System memory to Video memory monochrome expansion.
+ *
+ * Source is monochrome image in system memory.  This function expands the
+ * monochrome data to color image in video memory.
+ */
+
+long deSystemMem2VideoMemMonoBlt(const char *pSrcbuf,
+				 long srcDelta,
+				 unsigned long startBit,
+				 unsigned long dBase,
+				 unsigned long dPitch,
+				 unsigned long bpp,
+				 unsigned long dx, unsigned long dy,
+				 unsigned long width, unsigned long height,
+				 unsigned long fColor,
+				 unsigned long bColor,
+				 unsigned long rop2) {
+	unsigned long bytePerPixel;
+	unsigned long ulBytesPerScan;
+	unsigned long ul4BytesPerScan;
+	unsigned long ulBytesRemain;
+	unsigned long de_ctrl = 0;
+	unsigned char ajRemain[4];
+	long i, j;
+
+	bytePerPixel = bpp / 8;
+
+	/* Just make sure the start bit is within legal range */
+	startBit &= 7;
+
+	ulBytesPerScan = (width + startBit + 7) / 8;
+	ul4BytesPerScan = ulBytesPerScan & ~3;
+	ulBytesRemain = ulBytesPerScan & 3;
+
+	if (smtc_de_busy)
+		deWaitForNotBusy();
+
+	/*
+	 * 2D Source Base.  Use 0 for HOST Blt.
+	 */
+
+	SMTC_write2Dreg(DE_WINDOW_SOURCE_BASE, 0);
+
+	/*
+	 * 2D Destination Base.
+	 *
+	 * It is an address offset (128 bit aligned) from the beginning of
+	 * frame buffer.
+	 */
+
+	SMTC_write2Dreg(DE_WINDOW_DESTINATION_BASE, dBase);
+
+	if (dPitch) {
+
+		/*
+		 * Program pitch (distance between the 1st points of two
+		 * adjacent lines).
+		 *
+		 * Note that input pitch is BYTE value, but the 2D Pitch
+		 * register uses pixel values. Need Byte to pixel convertion.
+		 */
+
+		SMTC_write2Dreg(DE_PITCH,
+			FIELD_VALUE(0, DE_PITCH, DESTINATION,
+			    dPitch /
+			    bytePerPixel) | FIELD_VALUE(0,
+							DE_PITCH,
+							SOURCE,
+							dPitch /
+							bytePerPixel));
+
+		/* Screen Window width in Pixels.
+		 *
+		 * 2D engine uses this value to calculate the linear address in
+		 * frame buffer for a given point.
+		 */
+
+		SMTC_write2Dreg(DE_WINDOW_WIDTH,
+			FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION,
+			    (dPitch /
+			     bytePerPixel)) | FIELD_VALUE(0,
+							  DE_WINDOW_WIDTH,
+							  SOURCE,
+							  (dPitch
+							   /
+							   bytePerPixel)));
+	}
+	/* Note: For 2D Source in Host Write, only X_K1 field is needed, and
+	 * Y_K2 field is not used. For mono bitmap, use startBit for X_K1.
+	 */
+
+	SMTC_write2Dreg(DE_SOURCE,
+			FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) |
+			FIELD_VALUE(0, DE_SOURCE, X_K1, startBit) |
+			FIELD_VALUE(0, DE_SOURCE, Y_K2, 0));
+
+	SMTC_write2Dreg(DE_DESTINATION,
+			FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) |
+			FIELD_VALUE(0, DE_DESTINATION, X, dx) |
+			FIELD_VALUE(0, DE_DESTINATION, Y, dy));
+
+	SMTC_write2Dreg(DE_DIMENSION,
+			FIELD_VALUE(0, DE_DIMENSION, X, width) |
+			FIELD_VALUE(0, DE_DIMENSION, Y_ET, height));
+
+	SMTC_write2Dreg(DE_FOREGROUND, fColor);
+	SMTC_write2Dreg(DE_BACKGROUND, bColor);
+
+	if (bpp)
+		deSetPixelFormat(bpp);
+	/* Set the pixel format of the destination */
+
+	de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, rop2) |
+	    FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
+	    FIELD_SET(0, DE_CONTROL, COMMAND, HOST_WRITE) |
+	    FIELD_SET(0, DE_CONTROL, HOST, MONO) |
+	    FIELD_SET(0, DE_CONTROL, STATUS, START);
+
+	SMTC_write2Dreg(DE_CONTROL, de_ctrl | deGetTransparency());
+
+	/* Write MONO data (line by line) to 2D Engine data port */
+	for (i = 0; i < height; i++) {
+		/* For each line, send the data in chunks of 4 bytes */
+		for (j = 0; j < (ul4BytesPerScan / 4); j++)
+			SMTC_write2Ddataport(0,
+					     *(unsigned long *)(pSrcbuf +
+								(j * 4)));
+
+		if (ulBytesRemain) {
+			memcpy(ajRemain, pSrcbuf + ul4BytesPerScan,
+			       ulBytesRemain);
+			SMTC_write2Ddataport(0, *(unsigned long *)ajRemain);
+		}
+
+		pSrcbuf += srcDelta;
+	}
+	smtc_de_busy = 1;
+
+	return 0;
+}
+
+/*
+ * This function gets the transparency status from DE_CONTROL register.
+ * It returns a double word with the transparent fields properly set,
+ * while other fields are 0.
+ */
+unsigned long deGetTransparency(void)
+{
+	unsigned long de_ctrl;
+
+	de_ctrl = SMTC_read2Dreg(DE_CONTROL);
+
+	de_ctrl &=
+	    FIELD_MASK(DE_CONTROL_TRANSPARENCY_MATCH) |
+	    FIELD_MASK(DE_CONTROL_TRANSPARENCY_SELECT) |
+	    FIELD_MASK(DE_CONTROL_TRANSPARENCY);
+
+	return de_ctrl;
+}
diff -Nur linux-2.6.30.orig/drivers/video/sm7xx/smtc2d.h linux-2.6.30/drivers/video/sm7xx/smtc2d.h
--- linux-2.6.30.orig/drivers/video/sm7xx/smtc2d.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/drivers/video/sm7xx/smtc2d.h	2009-06-14 20:25:20.000000000 +0200
@@ -0,0 +1,530 @@
+/*
+ * smtc2d.h -- Silicon Motion SM7xx 2D drawing engine functions.
+ *
+ * Copyright (C) 2006 Silicon Motion Technology Corp.
+ * Author: Ge Wang, gewang@siliconmotion.com
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#ifndef NULL
+#define NULL	 0
+#endif
+
+/* Internal macros */
+
+#define _F_START(f)		(0 ? f)
+#define _F_END(f)		(1 ? f)
+#define _F_SIZE(f)		(1 + _F_END(f) - _F_START(f))
+#define _F_MASK(f)		(((1ULL << _F_SIZE(f)) - 1) << _F_START(f))
+#define _F_NORMALIZE(v, f)	(((v) & _F_MASK(f)) >> _F_START(f))
+#define _F_DENORMALIZE(v, f)	(((v) << _F_START(f)) & _F_MASK(f))
+
+/* Global macros */
+
+#define FIELD_GET(x, reg, field) \
+( \
+    _F_NORMALIZE((x), reg ## _ ## field) \
+)
+
+#define FIELD_SET(x, reg, field, value) \
+( \
+    (x & ~_F_MASK(reg ## _ ## field)) \
+    | _F_DENORMALIZE(reg ## _ ## field ## _ ## value, reg ## _ ## field) \
+)
+
+#define FIELD_VALUE(x, reg, field, value) \
+( \
+    (x & ~_F_MASK(reg ## _ ## field)) \
+    | _F_DENORMALIZE(value, reg ## _ ## field) \
+)
+
+#define FIELD_CLEAR(reg, field) \
+( \
+    ~_F_MASK(reg ## _ ## field) \
+)
+
+/* Field Macros                        */
+
+#define FIELD_START(field)	(0 ? field)
+#define FIELD_END(field)	(1 ? field)
+#define FIELD_SIZE(field) \
+	(1 + FIELD_END(field) - FIELD_START(field))
+
+#define FIELD_MASK(field) \
+	(((1 << (FIELD_SIZE(field)-1)) \
+	| ((1 << (FIELD_SIZE(field)-1)) - 1)) \
+	<< FIELD_START(field))
+
+#define FIELD_NORMALIZE(reg, field) \
+	(((reg) & FIELD_MASK(field)) >> FIELD_START(field))
+
+#define FIELD_DENORMALIZE(field, value) \
+	(((value) << FIELD_START(field)) & FIELD_MASK(field))
+
+#define FIELD_INIT(reg, field, value) \
+	FIELD_DENORMALIZE(reg ## _ ## field, \
+		reg ## _ ## field ## _ ## value)
+
+#define FIELD_INIT_VAL(reg, field, value) \
+	(FIELD_DENORMALIZE(reg ## _ ## field, value))
+
+#define FIELD_VAL_SET(x, r, f, v) ({ \
+	x = (x & ~FIELD_MASK(r ## _ ## f)) \
+	| FIELD_DENORMALIZE(r ## _ ## f, r ## _ ## f ## _ ## v) \
+})
+
+#define RGB(r, g, b)	((unsigned long)(((r) << 16) | ((g) << 8) | (b)))
+
+/* Transparent info definition */
+typedef struct {
+	unsigned long match;	/* Matching pixel is OPAQUE/TRANSPARENT */
+	unsigned long select;	/* Transparency controlled by SRC/DST */
+	unsigned long control;	/* ENABLE/DISABLE transparency */
+	unsigned long color;	/* Transparent color */
+} Transparent, *pTransparent;
+
+#define PIXEL_DEPTH_1_BP	0	/* 1 bit per pixel */
+#define PIXEL_DEPTH_8_BPP	1	/* 8 bits per pixel */
+#define PIXEL_DEPTH_16_BPP	2	/* 16 bits per pixel */
+#define PIXEL_DEPTH_32_BPP	3	/* 32 bits per pixel */
+#define PIXEL_DEPTH_YUV422	8	/* 16 bits per pixel YUV422 */
+#define PIXEL_DEPTH_YUV420	9	/* 16 bits per pixel YUV420 */
+
+#define PATTERN_WIDTH		8
+#define PATTERN_HEIGHT		8
+
+#define	TOP_TO_BOTTOM		0
+#define	BOTTOM_TO_TOP		1
+#define RIGHT_TO_LEFT		BOTTOM_TO_TOP
+#define LEFT_TO_RIGHT		TOP_TO_BOTTOM
+
+/* Constants used in Transparent structure */
+#define MATCH_OPAQUE		0x00000000
+#define MATCH_TRANSPARENT	0x00000400
+#define SOURCE			0x00000000
+#define DESTINATION		0x00000200
+
+/* 2D registers. */
+
+#define	DE_SOURCE			0x000000
+#define	DE_SOURCE_WRAP			31 : 31
+#define	DE_SOURCE_WRAP_DISABLE		0
+#define	DE_SOURCE_WRAP_ENABLE		1
+#define	DE_SOURCE_X_K1			29 : 16
+#define	DE_SOURCE_Y_K2			15 : 0
+
+#define	DE_DESTINATION			0x000004
+#define	DE_DESTINATION_WRAP		31 : 31
+#define	DE_DESTINATION_WRAP_DISABLE	0
+#define	DE_DESTINATION_WRAP_ENABLE	1
+#define	DE_DESTINATION_X		28 : 16
+#define	DE_DESTINATION_Y		15 : 0
+
+#define	DE_DIMENSION			0x000008
+#define	DE_DIMENSION_X			28 : 16
+#define	DE_DIMENSION_Y_ET		15 : 0
+
+#define	DE_CONTROL			0x00000C
+#define	DE_CONTROL_STATUS		31 : 31
+#define	DE_CONTROL_STATUS_STOP		0
+#define	DE_CONTROL_STATUS_START		1
+#define	DE_CONTROL_PATTERN		30 : 30
+#define	DE_CONTROL_PATTERN_MONO		0
+#define	DE_CONTROL_PATTERN_COLOR	1
+#define	DE_CONTROL_UPDATE_DESTINATION_X		29 : 29
+#define	DE_CONTROL_UPDATE_DESTINATION_X_DISABLE	0
+#define	DE_CONTROL_UPDATE_DESTINATION_X_ENABLE	1
+#define	DE_CONTROL_QUICK_START			28 : 28
+#define	DE_CONTROL_QUICK_START_DISABLE		0
+#define	DE_CONTROL_QUICK_START_ENABLE		1
+#define	DE_CONTROL_DIRECTION			27 : 27
+#define	DE_CONTROL_DIRECTION_LEFT_TO_RIGHT	0
+#define	DE_CONTROL_DIRECTION_RIGHT_TO_LEFT	1
+#define	DE_CONTROL_MAJOR			26 : 26
+#define	DE_CONTROL_MAJOR_X			0
+#define	DE_CONTROL_MAJOR_Y			1
+#define	DE_CONTROL_STEP_X			25 : 25
+#define	DE_CONTROL_STEP_X_POSITIVE		1
+#define	DE_CONTROL_STEP_X_NEGATIVE		0
+#define	DE_CONTROL_STEP_Y			24 : 24
+#define	DE_CONTROL_STEP_Y_POSITIVE		1
+#define	DE_CONTROL_STEP_Y_NEGATIVE		0
+#define	DE_CONTROL_STRETCH			23 : 23
+#define	DE_CONTROL_STRETCH_DISABLE		0
+#define	DE_CONTROL_STRETCH_ENABLE		1
+#define	DE_CONTROL_HOST				22 : 22
+#define	DE_CONTROL_HOST_COLOR			0
+#define	DE_CONTROL_HOST_MONO			1
+#define	DE_CONTROL_LAST_PIXEL			21 : 21
+#define	DE_CONTROL_LAST_PIXEL_OFF		0
+#define	DE_CONTROL_LAST_PIXEL_ON		1
+#define	DE_CONTROL_COMMAND			20 : 16
+#define	DE_CONTROL_COMMAND_BITBLT		0
+#define	DE_CONTROL_COMMAND_RECTANGLE_FILL	1
+#define	DE_CONTROL_COMMAND_DE_TILE		2
+#define	DE_CONTROL_COMMAND_TRAPEZOID_FILL	3
+#define	DE_CONTROL_COMMAND_ALPHA_BLEND		4
+#define	DE_CONTROL_COMMAND_RLE_STRIP		5
+#define	DE_CONTROL_COMMAND_SHORT_STROKE		6
+#define	DE_CONTROL_COMMAND_LINE_DRAW		7
+#define	DE_CONTROL_COMMAND_HOST_WRITE		8
+#define	DE_CONTROL_COMMAND_HOST_READ		9
+#define	DE_CONTROL_COMMAND_HOST_WRITE_BOTTOM_UP	10
+#define	DE_CONTROL_COMMAND_ROTATE		11
+#define	DE_CONTROL_COMMAND_FONT			12
+#define	DE_CONTROL_COMMAND_TEXTURE_LOAD		15
+#define	DE_CONTROL_ROP_SELECT			15 : 15
+#define	DE_CONTROL_ROP_SELECT_ROP3		0
+#define	DE_CONTROL_ROP_SELECT_ROP2		1
+#define	DE_CONTROL_ROP2_SOURCE			14 : 14
+#define	DE_CONTROL_ROP2_SOURCE_BITMAP		0
+#define	DE_CONTROL_ROP2_SOURCE_PATTERN		1
+#define	DE_CONTROL_MONO_DATA			13 : 12
+#define	DE_CONTROL_MONO_DATA_NOT_PACKED		0
+#define	DE_CONTROL_MONO_DATA_8_PACKED		1
+#define	DE_CONTROL_MONO_DATA_16_PACKED		2
+#define	DE_CONTROL_MONO_DATA_32_PACKED		3
+#define	DE_CONTROL_REPEAT_ROTATE		11 : 11
+#define	DE_CONTROL_REPEAT_ROTATE_DISABLE	0
+#define	DE_CONTROL_REPEAT_ROTATE_ENABLE		1
+#define	DE_CONTROL_TRANSPARENCY_MATCH		10 : 10
+#define	DE_CONTROL_TRANSPARENCY_MATCH_OPAQUE		0
+#define	DE_CONTROL_TRANSPARENCY_MATCH_TRANSPARENT	1
+#define	DE_CONTROL_TRANSPARENCY_SELECT			9 : 9
+#define	DE_CONTROL_TRANSPARENCY_SELECT_SOURCE		0
+#define	DE_CONTROL_TRANSPARENCY_SELECT_DESTINATION	1
+#define	DE_CONTROL_TRANSPARENCY				8 : 8
+#define	DE_CONTROL_TRANSPARENCY_DISABLE			0
+#define	DE_CONTROL_TRANSPARENCY_ENABLE			1
+#define	DE_CONTROL_ROP					7 : 0
+
+/* Pseudo fields. */
+
+#define	DE_CONTROL_SHORT_STROKE_DIR			27 : 24
+#define	DE_CONTROL_SHORT_STROKE_DIR_225			0
+#define	DE_CONTROL_SHORT_STROKE_DIR_135			1
+#define	DE_CONTROL_SHORT_STROKE_DIR_315			2
+#define	DE_CONTROL_SHORT_STROKE_DIR_45			3
+#define	DE_CONTROL_SHORT_STROKE_DIR_270			4
+#define	DE_CONTROL_SHORT_STROKE_DIR_90			5
+#define	DE_CONTROL_SHORT_STROKE_DIR_180			8
+#define	DE_CONTROL_SHORT_STROKE_DIR_0			10
+#define	DE_CONTROL_ROTATION				25 : 24
+#define	DE_CONTROL_ROTATION_0				0
+#define	DE_CONTROL_ROTATION_270				1
+#define	DE_CONTROL_ROTATION_90				2
+#define	DE_CONTROL_ROTATION_180				3
+
+#define	DE_PITCH					0x000010
+#define	DE_PITCH_DESTINATION				28 : 16
+#define	DE_PITCH_SOURCE					12 : 0
+
+#define	DE_FOREGROUND					0x000014
+#define	DE_FOREGROUND_COLOR				31 : 0
+
+#define	DE_BACKGROUND					0x000018
+#define	DE_BACKGROUND_COLOR				31 : 0
+
+#define	DE_STRETCH_FORMAT				0x00001C
+#define	DE_STRETCH_FORMAT_PATTERN_XY			30 : 30
+#define	DE_STRETCH_FORMAT_PATTERN_XY_NORMAL		0
+#define	DE_STRETCH_FORMAT_PATTERN_XY_OVERWRITE		1
+#define	DE_STRETCH_FORMAT_PATTERN_Y			29 : 27
+#define	DE_STRETCH_FORMAT_PATTERN_X			25 : 23
+#define	DE_STRETCH_FORMAT_PIXEL_FORMAT			21 : 20
+#define	DE_STRETCH_FORMAT_PIXEL_FORMAT_8		0
+#define	DE_STRETCH_FORMAT_PIXEL_FORMAT_16		1
+#define	DE_STRETCH_FORMAT_PIXEL_FORMAT_24		3
+#define	DE_STRETCH_FORMAT_PIXEL_FORMAT_32		2
+#define	DE_STRETCH_FORMAT_ADDRESSING			19 : 16
+#define	DE_STRETCH_FORMAT_ADDRESSING_XY			0
+#define	DE_STRETCH_FORMAT_ADDRESSING_LINEAR		15
+#define	DE_STRETCH_FORMAT_SOURCE_HEIGHT			11 : 0
+
+#define	DE_COLOR_COMPARE				0x000020
+#define	DE_COLOR_COMPARE_COLOR				23 : 0
+
+#define	DE_COLOR_COMPARE_MASK				0x000024
+#define	DE_COLOR_COMPARE_MASK_MASKS			23 : 0
+
+#define	DE_MASKS					0x000028
+#define	DE_MASKS_BYTE_MASK				31 : 16
+#define	DE_MASKS_BIT_MASK				15 : 0
+
+#define	DE_CLIP_TL					0x00002C
+#define	DE_CLIP_TL_TOP					31 : 16
+#define	DE_CLIP_TL_STATUS				13 : 13
+#define	DE_CLIP_TL_STATUS_DISABLE			0
+#define	DE_CLIP_TL_STATUS_ENABLE			1
+#define	DE_CLIP_TL_INHIBIT				12 : 12
+#define	DE_CLIP_TL_INHIBIT_OUTSIDE			0
+#define	DE_CLIP_TL_INHIBIT_INSIDE			1
+#define	DE_CLIP_TL_LEFT					11 : 0
+
+#define	DE_CLIP_BR					0x000030
+#define	DE_CLIP_BR_BOTTOM				31 : 16
+#define	DE_CLIP_BR_RIGHT				12 : 0
+
+#define	DE_MONO_PATTERN_LOW				0x000034
+#define	DE_MONO_PATTERN_LOW_PATTERN			31 : 0
+
+#define	DE_MONO_PATTERN_HIGH				0x000038
+#define	DE_MONO_PATTERN_HIGH_PATTERN			31 : 0
+
+#define	DE_WINDOW_WIDTH					0x00003C
+#define	DE_WINDOW_WIDTH_DESTINATION			28 : 16
+#define	DE_WINDOW_WIDTH_SOURCE				12 : 0
+
+#define	DE_WINDOW_SOURCE_BASE				0x000040
+#define	DE_WINDOW_SOURCE_BASE_EXT			27 : 27
+#define	DE_WINDOW_SOURCE_BASE_EXT_LOCAL			0
+#define	DE_WINDOW_SOURCE_BASE_EXT_EXTERNAL		1
+#define	DE_WINDOW_SOURCE_BASE_CS			26 : 26
+#define	DE_WINDOW_SOURCE_BASE_CS_0			0
+#define	DE_WINDOW_SOURCE_BASE_CS_1			1
+#define	DE_WINDOW_SOURCE_BASE_ADDRESS			25 : 0
+
+#define	DE_WINDOW_DESTINATION_BASE			0x000044
+#define	DE_WINDOW_DESTINATION_BASE_EXT			27 : 27
+#define	DE_WINDOW_DESTINATION_BASE_EXT_LOCAL		0
+#define	DE_WINDOW_DESTINATION_BASE_EXT_EXTERNAL		1
+#define	DE_WINDOW_DESTINATION_BASE_CS			26 : 26
+#define	DE_WINDOW_DESTINATION_BASE_CS_0			0
+#define	DE_WINDOW_DESTINATION_BASE_CS_1			1
+#define	DE_WINDOW_DESTINATION_BASE_ADDRESS		25 : 0
+
+#define	DE_ALPHA					0x000048
+#define	DE_ALPHA_VALUE					7 : 0
+
+#define	DE_WRAP						0x00004C
+#define	DE_WRAP_X					31 : 16
+#define	DE_WRAP_Y					15 : 0
+
+#define	DE_STATUS					0x000050
+#define	DE_STATUS_CSC					1 : 1
+#define	DE_STATUS_CSC_CLEAR				0
+#define	DE_STATUS_CSC_NOT_ACTIVE			0
+#define	DE_STATUS_CSC_ACTIVE				1
+#define	DE_STATUS_2D					0 : 0
+#define	DE_STATUS_2D_CLEAR				0
+#define	DE_STATUS_2D_NOT_ACTIVE				0
+#define	DE_STATUS_2D_ACTIVE				1
+
+/* Color Space Conversion registers. */
+
+#define	CSC_Y_SOURCE_BASE				0x0000C8
+#define	CSC_Y_SOURCE_BASE_EXT				27 : 27
+#define	CSC_Y_SOURCE_BASE_EXT_LOCAL			0
+#define	CSC_Y_SOURCE_BASE_EXT_EXTERNAL			1
+#define	CSC_Y_SOURCE_BASE_CS				26 : 26
+#define	CSC_Y_SOURCE_BASE_CS_0				0
+#define	CSC_Y_SOURCE_BASE_CS_1				1
+#define	CSC_Y_SOURCE_BASE_ADDRESS			25 : 0
+
+#define	CSC_CONSTANTS					0x0000CC
+#define	CSC_CONSTANTS_Y					31 : 24
+#define	CSC_CONSTANTS_R					23 : 16
+#define	CSC_CONSTANTS_G					15 : 8
+#define	CSC_CONSTANTS_B					7 : 0
+
+#define	CSC_Y_SOURCE_X					0x0000D0
+#define	CSC_Y_SOURCE_X_INTEGER				26 : 16
+#define	CSC_Y_SOURCE_X_FRACTION				15 : 3
+
+#define	CSC_Y_SOURCE_Y					0x0000D4
+#define	CSC_Y_SOURCE_Y_INTEGER				27 : 16
+#define	CSC_Y_SOURCE_Y_FRACTION				15 : 3
+
+#define	CSC_U_SOURCE_BASE				0x0000D8
+#define	CSC_U_SOURCE_BASE_EXT				27 : 27
+#define	CSC_U_SOURCE_BASE_EXT_LOCAL			0
+#define	CSC_U_SOURCE_BASE_EXT_EXTERNAL			1
+#define	CSC_U_SOURCE_BASE_CS				26 : 26
+#define	CSC_U_SOURCE_BASE_CS_0				0
+#define	CSC_U_SOURCE_BASE_CS_1				1
+#define	CSC_U_SOURCE_BASE_ADDRESS			25 : 0
+
+#define	CSC_V_SOURCE_BASE				0x0000DC
+#define	CSC_V_SOURCE_BASE_EXT				27 : 27
+#define	CSC_V_SOURCE_BASE_EXT_LOCAL			0
+#define	CSC_V_SOURCE_BASE_EXT_EXTERNAL			1
+#define	CSC_V_SOURCE_BASE_CS				26 : 26
+#define	CSC_V_SOURCE_BASE_CS_0				0
+#define	CSC_V_SOURCE_BASE_CS_1				1
+#define	CSC_V_SOURCE_BASE_ADDRESS			25 : 0
+
+#define	CSC_SOURCE_DIMENSION				0x0000E0
+#define	CSC_SOURCE_DIMENSION_X				31 : 16
+#define	CSC_SOURCE_DIMENSION_Y				15 : 0
+
+#define	CSC_SOURCE_PITCH				0x0000E4
+#define	CSC_SOURCE_PITCH_Y				31 : 16
+#define	CSC_SOURCE_PITCH_UV				15 : 0
+
+#define	CSC_DESTINATION					0x0000E8
+#define	CSC_DESTINATION_WRAP				31 : 31
+#define	CSC_DESTINATION_WRAP_DISABLE			0
+#define	CSC_DESTINATION_WRAP_ENABLE			1
+#define	CSC_DESTINATION_X				27 : 16
+#define	CSC_DESTINATION_Y				11 : 0
+
+#define	CSC_DESTINATION_DIMENSION			0x0000EC
+#define	CSC_DESTINATION_DIMENSION_X			31 : 16
+#define	CSC_DESTINATION_DIMENSION_Y			15 : 0
+
+#define	CSC_DESTINATION_PITCH				0x0000F0
+#define	CSC_DESTINATION_PITCH_X				31 : 16
+#define	CSC_DESTINATION_PITCH_Y				15 : 0
+
+#define	CSC_SCALE_FACTOR				0x0000F4
+#define	CSC_SCALE_FACTOR_HORIZONTAL			31 : 16
+#define	CSC_SCALE_FACTOR_VERTICAL			15 : 0
+
+#define	CSC_DESTINATION_BASE				0x0000F8
+#define	CSC_DESTINATION_BASE_EXT			27 : 27
+#define	CSC_DESTINATION_BASE_EXT_LOCAL			0
+#define	CSC_DESTINATION_BASE_EXT_EXTERNAL		1
+#define	CSC_DESTINATION_BASE_CS				26 : 26
+#define	CSC_DESTINATION_BASE_CS_0			0
+#define	CSC_DESTINATION_BASE_CS_1			1
+#define	CSC_DESTINATION_BASE_ADDRESS			25 : 0
+
+#define	CSC_CONTROL					0x0000FC
+#define	CSC_CONTROL_STATUS				31 : 31
+#define	CSC_CONTROL_STATUS_STOP				0
+#define	CSC_CONTROL_STATUS_START			1
+#define	CSC_CONTROL_SOURCE_FORMAT			30 : 28
+#define	CSC_CONTROL_SOURCE_FORMAT_YUV422		0
+#define	CSC_CONTROL_SOURCE_FORMAT_YUV420I		1
+#define	CSC_CONTROL_SOURCE_FORMAT_YUV420		2
+#define	CSC_CONTROL_SOURCE_FORMAT_YVU9			3
+#define	CSC_CONTROL_SOURCE_FORMAT_IYU1			4
+#define	CSC_CONTROL_SOURCE_FORMAT_IYU2			5
+#define	CSC_CONTROL_SOURCE_FORMAT_RGB565		6
+#define	CSC_CONTROL_SOURCE_FORMAT_RGB8888		7
+#define	CSC_CONTROL_DESTINATION_FORMAT			27 : 26
+#define	CSC_CONTROL_DESTINATION_FORMAT_RGB565		0
+#define	CSC_CONTROL_DESTINATION_FORMAT_RGB8888		1
+#define	CSC_CONTROL_HORIZONTAL_FILTER			25 : 25
+#define	CSC_CONTROL_HORIZONTAL_FILTER_DISABLE		0
+#define	CSC_CONTROL_HORIZONTAL_FILTER_ENABLE		1
+#define	CSC_CONTROL_VERTICAL_FILTER			24 : 24
+#define	CSC_CONTROL_VERTICAL_FILTER_DISABLE		0
+#define	CSC_CONTROL_VERTICAL_FILTER_ENABLE		1
+#define	CSC_CONTROL_BYTE_ORDER				23 : 23
+#define	CSC_CONTROL_BYTE_ORDER_YUYV			0
+#define	CSC_CONTROL_BYTE_ORDER_UYVY			1
+
+#define	DE_DATA_PORT_501				0x110000
+#define	DE_DATA_PORT_712				0x400000
+#define	DE_DATA_PORT_722				0x6000
+
+/* point to virtual Memory Map IO starting address */
+extern char *smtc_RegBaseAddress;
+/* point to virtual video memory starting address */
+extern char *smtc_VRAMBaseAddress;
+extern unsigned char smtc_de_busy;
+
+extern unsigned long memRead32(unsigned long nOffset);
+extern void memWrite32(unsigned long nOffset, unsigned long nData);
+extern unsigned long SMTC_read2Dreg(unsigned long nOffset);
+
+/* 2D functions */
+extern void deInit(unsigned int nModeWidth, unsigned int nModeHeight,
+		   unsigned int bpp);
+
+extern void deWaitForNotBusy(void);
+
+extern void deVerticalLine(unsigned long dst_base,
+	unsigned long dst_pitch,
+	unsigned long nX,
+	unsigned long nY,
+	unsigned long dst_height,
+	unsigned long nColor);
+
+extern void deHorizontalLine(unsigned long dst_base,
+	unsigned long dst_pitch,
+	unsigned long nX,
+	unsigned long nY,
+	unsigned long dst_width,
+	unsigned long nColor);
+
+extern void deLine(unsigned long dst_base,
+	unsigned long dst_pitch,
+	unsigned long nX1,
+	unsigned long nY1,
+	unsigned long nX2,
+	unsigned long nY2,
+	unsigned long nColor);
+
+extern void deFillRect(unsigned long dst_base,
+	unsigned long dst_pitch,
+	unsigned long dst_X,
+	unsigned long dst_Y,
+	unsigned long dst_width,
+	unsigned long dst_height,
+	unsigned long nColor);
+
+extern void deRotatePattern(unsigned char *pattern_dstaddr,
+	unsigned long pattern_src_addr,
+	unsigned long pattern_BPP,
+	unsigned long pattern_stride,
+	int	patternX,
+	int	patternY);
+
+extern void deCopy(unsigned long dst_base,
+	unsigned long dst_pitch,
+	unsigned long dst_BPP,
+	unsigned long dst_X,
+	unsigned long dst_Y,
+	unsigned long dst_width,
+	unsigned long dst_height,
+	unsigned long src_base,
+	unsigned long src_pitch,
+	unsigned long src_X,
+	unsigned long src_Y,
+	pTransparent	pTransp,
+	unsigned char nROP2);
+
+/*
+ * System memory to Video memory monochrome expansion.
+ *
+ * Source is monochrome image in system memory.  This function expands the
+ * monochrome data to color image in video memory.
+ *
+ * @pSrcbuf: pointer to start of source buffer in system memory
+ * @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top
+ * 		down and -ive mean button up
+ * @startBit: Mono data can start at any bit in a byte, this value should
+ * 		be 0 to 7
+ * @dBase: Address of destination :  offset in frame buffer
+ * @dPitch: Pitch value of destination surface in BYTE
+ * @bpp: Color depth of destination surface
+ * @dx, dy: Starting coordinate of destination surface
+ * @width, height: width and height of rectange in pixel value
+ * @fColor,bColor: Foreground, Background color (corresponding to a 1, 0 in
+ * 	the monochrome data)
+ * @rop2: ROP value
+ */
+
+extern long deSystemMem2VideoMemMonoBlt(
+	const char *pSrcbuf,
+	long srcDelta,
+	unsigned long startBit,
+	unsigned long dBase,
+	unsigned long dPitch,
+	unsigned long bpp,
+	unsigned long dx, unsigned long dy,
+	unsigned long width, unsigned long height,
+	unsigned long fColor,
+	unsigned long bColor,
+	unsigned long rop2);
+
+extern unsigned long deGetTransparency(void);
+extern void deSetPixelFormat(unsigned long bpp);
diff -Nur linux-2.6.30.orig/drivers/video/sm7xx/smtcfb.c linux-2.6.30/drivers/video/sm7xx/smtcfb.c
--- linux-2.6.30.orig/drivers/video/sm7xx/smtcfb.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/drivers/video/sm7xx/smtcfb.c	2009-06-14 20:25:20.000000000 +0200
@@ -0,0 +1,1135 @@
+/*
+ * smtcfb.c -- Silicon Motion SM7xx frame buffer device
+ *
+ * Copyright (C) 2006 Silicon Motion Technology Corp.
+ * Authors: Ge Wang, gewang@siliconmotion.com
+ * 	    Boyod boyod.yang@siliconmotion.com.cn
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ *
+ * Version 0.10.26192.21.01
+ * 	- Add PowerPC/Big endian support
+ * 	- Add 2D support for Lynx
+ * 	- Verified on2.6.19.2  Boyod.yang <boyod.yang@siliconmotion.com.cn>
+ *
+ * Version 0.09.2621.00.01
+ * 	- Only support Linux Kernel's version 2.6.21.
+ *	Boyod.yang  <boyod.yang@siliconmotion.com.cn>
+ *
+ * Version 0.09
+ * 	- Only support Linux Kernel's version 2.6.12.
+ * 	Boyod.yang <boyod.yang@siliconmotion.com.cn>
+ */
+
+#ifndef __KERNEL__
+#define __KERNEL__
+#endif
+
+#include <linux/io.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/uaccess.h>
+#include <linux/screen_info.h>
+
+#ifdef CONFIG_PM
+#include <linux/pm.h>
+#endif
+
+struct screen_info smtc_screen_info;
+
+#include "smtcfb.h"
+#include "smtc2d.h"
+
+#ifdef DEBUG
+#define smdbg(format, arg...)	printk(KERN_DEBUG format , ## arg)
+#else
+#define smdbg(format, arg...)
+#endif
+
+/*
+* Private structure
+*/
+struct smtcfb_info {
+	/*
+	 * The following is a pointer to be passed into the
+	 * functions below.  The modules outside the main
+	 * voyager.c driver have no knowledge as to what
+	 * is within this structure.
+	 */
+	struct fb_info fb;
+	struct display_switch *dispsw;
+	struct pci_dev *dev;
+	signed int currcon;
+
+	struct {
+		u8 red, green, blue;
+	} palette[NR_RGB];
+
+	u_int palette_size;
+};
+
+struct par_info {
+	/*
+	 * Hardware
+	 */
+	u16 chipID;
+	unsigned char __iomem *m_pMMIO;
+	char __iomem *m_pLFB;
+	char *m_pDPR;
+	char *m_pVPR;
+	char *m_pCPR;
+
+	u_int width;
+	u_int height;
+	u_int hz;
+	u_long BaseAddressInVRAM;
+	u8 chipRevID;
+};
+
+struct vesa_mode_table {
+	char mode_index[15];
+	u16 lfb_width;
+	u16 lfb_height;
+	u16 lfb_depth;
+};
+
+static struct vesa_mode_table vesa_mode[] = {
+	{"640x480x8", 640, 480, 8},
+	{"800x480x8", 800, 480, 8},
+	{"800x600x8", 800, 600, 8},
+	{"1024x768x8", 1024, 768, 8},
+	{"1280x1024x8", 1280, 1024, 8},
+
+	{"640x480x16", 640, 480, 16},
+	{"800x480x16", 800, 480, 16},
+	{"800x600x16", 800, 600, 16},
+	{"1024x768x16", 1024, 768, 16},
+	{"1280x1024x16", 1280, 1024, 16},
+
+	{"640x480x24", 640, 480, 24},
+	{"800x480x24", 800, 480, 24},
+	{"800x600x24", 800, 600, 24},
+	{"1024x768x24", 1024, 768, 24},
+	{"1280x1024x24", 1280, 1024, 24},
+};
+
+char __iomem *smtc_RegBaseAddress;	/* Memory Map IO starting address */
+char __iomem *smtc_VRAMBaseAddress;	/* video memory starting address */
+
+char *smtc_2DBaseAddress;	/* 2D engine starting address */
+char *smtc_2Ddataport;		/* 2D data port offset */
+short smtc_2Dacceleration;
+
+static u32 colreg[17];
+static struct par_info hw;	/* hardware information */
+
+#if defined(CONFIG_FB_SM7XX_DUALHEAD)
+
+static u32 colreg2[17];
+/* hardware information for second display (CRT) */
+static struct par_info hw2;
+/* fb_info for second display (CRT) */
+struct smtcfb_info smtcfb_info2;
+
+#endif	/* CONFIG_FB_SM501_DUALHEAD */
+
+u16 smtc_ChipIDs[] = {
+	0x710,
+	0x712,
+	0x720
+};
+
+int sm712be_flag;
+
+#define numSMTCchipIDs (sizeof(smtc_ChipIDs) / sizeof(u16))
+
+void deWaitForNotBusy(void)
+{
+	unsigned long i = 0x1000000;
+	while (i--) {
+		if ((smtc_seqr(0x16) & 0x18) == 0x10)
+			break;
+	}
+	smtc_de_busy = 0;
+}
+
+static void sm712_set_timing(struct smtcfb_info *sfb,
+			     struct par_info *ppar_info)
+{
+	int i = 0, j = 0;
+	u32 m_nScreenStride;
+
+	smdbg("\nppar_info->width = %d ppar_info->height = %d"
+			"sfb->fb.var.bits_per_pixel = %d ppar_info->hz = %d\n",
+			ppar_info->width, ppar_info->height,
+			sfb->fb.var.bits_per_pixel, ppar_info->hz);
+
+	for (j = 0; j < numVGAModes; j++) {
+		if (VGAMode[j].mmSizeX == ppar_info->width &&
+		    VGAMode[j].mmSizeY == ppar_info->height &&
+		    VGAMode[j].bpp == sfb->fb.var.bits_per_pixel &&
+		    VGAMode[j].hz == ppar_info->hz) {
+
+			smdbg("\nVGAMode[j].mmSizeX  = %d VGAMode[j].mmSizeY ="
+					"%d VGAMode[j].bpp = %d"
+					"VGAMode[j].hz=%d\n",
+					VGAMode[j].mmSizeX, VGAMode[j].mmSizeY,
+					VGAMode[j].bpp, VGAMode[j].hz);
+
+			smdbg("VGAMode index=%d\n", j);
+
+			smtc_mmiowb(0x0, 0x3c6);
+
+			smtc_seqw(0, 0x1);
+
+			smtc_mmiowb(VGAMode[j].Init_MISC, 0x3c2);
+
+			/* init SEQ register SR00 - SR04 */
+			for (i = 0; i < SIZE_SR00_SR04; i++)
+				smtc_seqw(i, VGAMode[j].Init_SR00_SR04[i]);
+
+			/* init SEQ register SR10 - SR24 */
+			for (i = 0; i < SIZE_SR10_SR24; i++)
+				smtc_seqw(i + 0x10,
+					  VGAMode[j].Init_SR10_SR24[i]);
+
+			/* init SEQ register SR30 - SR75 */
+			for (i = 0; i < SIZE_SR30_SR75; i++)
+				if (((i + 0x30) != 0x62) \
+					&& ((i + 0x30) != 0x6a) \
+					&& ((i + 0x30) != 0x6b))
+					smtc_seqw(i + 0x30,
+						VGAMode[j].Init_SR30_SR75[i]);
+
+			/* init SEQ register SR80 - SR93 */
+			for (i = 0; i < SIZE_SR80_SR93; i++)
+				smtc_seqw(i + 0x80,
+					  VGAMode[j].Init_SR80_SR93[i]);
+
+			/* init SEQ register SRA0 - SRAF */
+			for (i = 0; i < SIZE_SRA0_SRAF; i++)
+				smtc_seqw(i + 0xa0,
+					  VGAMode[j].Init_SRA0_SRAF[i]);
+
+			/* init Graphic register GR00 - GR08 */
+			for (i = 0; i < SIZE_GR00_GR08; i++)
+				smtc_grphw(i, VGAMode[j].Init_GR00_GR08[i]);
+
+			/* init Attribute register AR00 - AR14 */
+			for (i = 0; i < SIZE_AR00_AR14; i++)
+				smtc_attrw(i, VGAMode[j].Init_AR00_AR14[i]);
+
+			/* init CRTC register CR00 - CR18 */
+			for (i = 0; i < SIZE_CR00_CR18; i++)
+				smtc_crtcw(i, VGAMode[j].Init_CR00_CR18[i]);
+
+			/* init CRTC register CR30 - CR4D */
+			for (i = 0; i < SIZE_CR30_CR4D; i++)
+				smtc_crtcw(i + 0x30,
+					   VGAMode[j].Init_CR30_CR4D[i]);
+
+			/* init CRTC register CR90 - CRA7 */
+			for (i = 0; i < SIZE_CR90_CRA7; i++)
+				smtc_crtcw(i + 0x90,
+					   VGAMode[j].Init_CR90_CRA7[i]);
+		}
+	}
+	smtc_mmiowb(0x67, 0x3c2);
+
+	/* set VPR registers */
+	writel(0x0, ppar_info->m_pVPR + 0x0C);
+	writel(0x0, ppar_info->m_pVPR + 0x40);
+
+	/* set data width */
+	m_nScreenStride =
+		(ppar_info->width * sfb->fb.var.bits_per_pixel) / 64;
+	switch (sfb->fb.var.bits_per_pixel) {
+	case 8:
+		writel(0x0, ppar_info->m_pVPR + 0x0);
+		break;
+	case 16:
+		writel(0x00020000, ppar_info->m_pVPR + 0x0);
+		break;
+	case 24:
+		writel(0x00040000, ppar_info->m_pVPR + 0x0);
+		break;
+	case 32:
+		writel(0x00030000, ppar_info->m_pVPR + 0x0);
+		break;
+	}
+	writel((u32) (((m_nScreenStride + 2) << 16) | m_nScreenStride),
+	       ppar_info->m_pVPR + 0x10);
+
+}
+
+static void sm712_setpalette(int regno, unsigned red, unsigned green,
+			     unsigned blue, struct fb_info *info)
+{
+	struct par_info *cur_par = (struct par_info *)info->par;
+
+	if (cur_par->BaseAddressInVRAM)
+		/*
+		 * second display palette for dual head. Enable CRT RAM, 6-bit
+		 * RAM
+		 */
+		smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x20);
+	else
+		/* primary display palette. Enable LCD RAM only, 6-bit RAM */
+		smtc_seqw(0x66, (smtc_seqr(0x66) & 0xC3) | 0x10);
+	smtc_mmiowb(regno, dac_reg);
+	smtc_mmiowb(red >> 10, dac_val);
+	smtc_mmiowb(green >> 10, dac_val);
+	smtc_mmiowb(blue >> 10, dac_val);
+}
+
+static void smtc_set_timing(struct smtcfb_info *sfb, struct par_info
+		*ppar_info)
+{
+	switch (ppar_info->chipID) {
+	case 0x710:
+	case 0x712:
+	case 0x720:
+		sm712_set_timing(sfb, ppar_info);
+		break;
+	}
+}
+
+static struct fb_var_screeninfo smtcfb_var = {
+	.xres = 1024,
+	.yres = 600,
+	.xres_virtual = 1024,
+	.yres_virtual = 600,
+	.bits_per_pixel = 16,
+	.red = {16, 8, 0},
+	.green = {8, 8, 0},
+	.blue = {0, 8, 0},
+	.activate = FB_ACTIVATE_NOW,
+	.height = -1,
+	.width = -1,
+	.vmode = FB_VMODE_NONINTERLACED,
+};
+
+static struct fb_fix_screeninfo smtcfb_fix = {
+	.id = "sm712fb",
+	.type = FB_TYPE_PACKED_PIXELS,
+	.visual = FB_VISUAL_TRUECOLOR,
+	.line_length = 800 * 3,
+	.accel = FB_ACCEL_SMI_LYNX,
+};
+
+/* chan_to_field
+ *
+ * convert a colour value into a field position
+ *
+ * from pxafb.c
+ */
+
+static inline unsigned int chan_to_field(unsigned int chan,
+					 struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int smtc_setcolreg(unsigned regno, unsigned red, unsigned green,
+			  unsigned blue, unsigned trans, struct fb_info *info)
+{
+	struct smtcfb_info *sfb = (struct smtcfb_info *)info;
+	u32 val;
+
+	if (regno > 255)
+		return 1;
+
+	switch (sfb->fb.fix.visual) {
+	case FB_VISUAL_DIRECTCOLOR:
+	case FB_VISUAL_TRUECOLOR:
+		/*
+		 * 16/32 bit true-colour, use pseuo-palette for 16 base color
+		 */
+		if (regno < 16) {
+			if (sfb->fb.var.bits_per_pixel == 16) {
+				u32 *pal = sfb->fb.pseudo_palette;
+				val = chan_to_field(red, &sfb->fb.var.red);
+				val |= chan_to_field(green, \
+						&sfb->fb.var.green);
+				val |= chan_to_field(blue, &sfb->fb.var.blue);
+#ifdef __BIG_ENDIAN
+				pal[regno] =
+				    ((red & 0xf800) >> 8) |
+				    ((green & 0xe000) >> 13) |
+				    ((green & 0x1c00) << 3) |
+				    ((blue & 0xf800) >> 3);
+#else
+				pal[regno] = val;
+#endif
+			} else {
+				u32 *pal = sfb->fb.pseudo_palette;
+				val = chan_to_field(red, &sfb->fb.var.red);
+				val |= chan_to_field(green, \
+						&sfb->fb.var.green);
+				val |= chan_to_field(blue, &sfb->fb.var.blue);
+#ifdef __BIG_ENDIAN
+				val =
+				    (val & 0xff00ff00 >> 8) |
+				    (val & 0x00ff00ff << 8);
+#endif
+				pal[regno] = val;
+			}
+		}
+		break;
+
+	case FB_VISUAL_PSEUDOCOLOR:
+		/* color depth 8 bit */
+		sm712_setpalette(regno, red, green, blue, info);
+		break;
+
+	default:
+		return 1;	/* unknown type */
+	}
+
+	return 0;
+
+}
+
+#ifdef __BIG_ENDIAN
+static ssize_t smtcfb_read(struct fb_info *info, char __user * buf, size_t
+				count, loff_t *ppos)
+{
+	unsigned long p = *ppos;
+
+	u32 *buffer, *dst;
+	u32 __iomem *src;
+	int c, i, cnt = 0, err = 0;
+	unsigned long total_size;
+
+	if (!info || !info->screen_base)
+		return -ENODEV;
+
+	if (info->state != FBINFO_STATE_RUNNING)
+		return -EPERM;
+
+	total_size = info->screen_size;
+
+	if (total_size == 0)
+		total_size = info->fix.smem_len;
+
+	if (p >= total_size)
+		return 0;
+
+	if (count >= total_size)
+		count = total_size;
+
+	if (count + p > total_size)
+		count = total_size - p;
+
+	buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	src = (u32 __iomem *) (info->screen_base + p);
+
+	if (info->fbops->fb_sync)
+		info->fbops->fb_sync(info);
+
+	while (count) {
+		c = (count > PAGE_SIZE) ? PAGE_SIZE : count;
+		dst = buffer;
+		for (i = c >> 2; i--;) {
+			*dst = fb_readl(src++);
+			*dst =
+			    (*dst & 0xff00ff00 >> 8) |
+			    (*dst & 0x00ff00ff << 8);
+			dst++;
+		}
+		if (c & 3) {
+			u8 *dst8 = (u8 *) dst;
+			u8 __iomem *src8 = (u8 __iomem *) src;
+
+			for (i = c & 3; i--;) {
+				if (i & 1) {
+					*dst8++ = fb_readb(++src8);
+				} else {
+					*dst8++ = fb_readb(--src8);
+					src8 += 2;
+				}
+			}
+			src = (u32 __iomem *) src8;
+		}
+
+		if (copy_to_user(buf, buffer, c)) {
+			err = -EFAULT;
+			break;
+		}
+		*ppos += c;
+		buf += c;
+		cnt += c;
+		count -= c;
+	}
+
+	kfree(buffer);
+
+	return (err) ? err : cnt;
+}
+
+static ssize_t
+smtcfb_write(struct fb_info *info, const char __user *buf, size_t count,
+	     loff_t *ppos)
+{
+	unsigned long p = *ppos;
+
+	u32 *buffer, *src;
+	u32 __iomem *dst;
+	int c, i, cnt = 0, err = 0;
+	unsigned long total_size;
+
+	if (!info || !info->screen_base)
+		return -ENODEV;
+
+	if (info->state != FBINFO_STATE_RUNNING)
+		return -EPERM;
+
+	total_size = info->screen_size;
+
+	if (total_size == 0)
+		total_size = info->fix.smem_len;
+
+	if (p > total_size)
+		return -EFBIG;
+
+	if (count > total_size) {
+		err = -EFBIG;
+		count = total_size;
+	}
+
+	if (count + p > total_size) {
+		if (!err)
+			err = -ENOSPC;
+
+		count = total_size - p;
+	}
+
+	buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	dst = (u32 __iomem *) (info->screen_base + p);
+
+	if (info->fbops->fb_sync)
+		info->fbops->fb_sync(info);
+
+	while (count) {
+		c = (count > PAGE_SIZE) ? PAGE_SIZE : count;
+		src = buffer;
+
+		if (copy_from_user(src, buf, c)) {
+			err = -EFAULT;
+			break;
+		}
+
+		for (i = c >> 2; i--;) {
+			fb_writel((*src & 0xff00ff00 >> 8) |
+				  (*src & 0x00ff00ff << 8), dst++);
+			src++;
+		}
+		if (c & 3) {
+			u8 *src8 = (u8 *) src;
+			u8 __iomem *dst8 = (u8 __iomem *) dst;
+
+			for (i = c & 3; i--;) {
+				if (i & 1) {
+					fb_writeb(*src8++, ++dst8);
+				} else {
+					fb_writeb(*src8++, --dst8);
+					dst8 += 2;
+				}
+			}
+			dst = (u32 __iomem *) dst8;
+		}
+
+		*ppos += c;
+		buf += c;
+		cnt += c;
+		count -= c;
+	}
+
+	kfree(buffer);
+
+	return (cnt) ? cnt : err;
+}
+#endif	/* ! __BIG_ENDIAN */
+
+#include "smtc2d.c"
+
+void smtcfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+	struct par_info *p = (struct par_info *)info->par;
+
+	if (smtc_2Dacceleration) {
+		if (!area->width || !area->height)
+			return;
+
+		deCopy(p->BaseAddressInVRAM, 0, info->var.bits_per_pixel,
+		       area->dx, area->dy, area->width, area->height,
+		       p->BaseAddressInVRAM, 0, area->sx, area->sy, 0, 0xC);
+
+	} else
+		cfb_copyarea(info, area);
+}
+
+void smtcfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+	struct par_info *p = (struct par_info *)info->par;
+
+	if (smtc_2Dacceleration) {
+		if (!rect->width || !rect->height)
+			return;
+		if (info->var.bits_per_pixel >= 24)
+			deFillRect(p->BaseAddressInVRAM, 0, rect->dx * 3,
+				   rect->dy * 3, rect->width * 3, rect->height,
+				   rect->color);
+		else
+			deFillRect(p->BaseAddressInVRAM, 0, rect->dx, rect->dy,
+				   rect->width, rect->height, rect->color);
+	} else
+		cfb_fillrect(info, rect);
+}
+
+void smtcfb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	struct par_info *p = (struct par_info *)info->par;
+	u32 bg_col = 0, fg_col = 0;
+
+	if ((smtc_2Dacceleration) && (image->depth == 1)) {
+		if (smtc_de_busy)
+			deWaitForNotBusy();
+
+		switch (info->var.bits_per_pixel) {
+		case 8:
+			bg_col = image->bg_color;
+			fg_col = image->fg_color;
+			break;
+		case 16:
+			bg_col =
+			    ((u32 *) (info->pseudo_palette))[image->bg_color];
+			fg_col =
+			    ((u32 *) (info->pseudo_palette))[image->fg_color];
+			break;
+		case 32:
+			bg_col =
+			    ((u32 *) (info->pseudo_palette))[image->bg_color];
+			fg_col =
+			    ((u32 *) (info->pseudo_palette))[image->fg_color];
+			break;
+		}
+
+		deSystemMem2VideoMemMonoBlt(
+			image->data,
+			image->width / 8,
+			0,
+			p->BaseAddressInVRAM,
+			0,
+			0,
+			image->dx, image->dy,
+			image->width, image->height,
+			fg_col, bg_col,
+			0x0C);
+
+	} else
+		cfb_imageblit(info, image);
+}
+
+static struct fb_ops smtcfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_setcolreg = smtc_setcolreg,
+	.fb_fillrect = smtcfb_fillrect,
+	.fb_imageblit = smtcfb_imageblit,
+	.fb_copyarea = smtcfb_copyarea,
+#ifdef __BIG_ENDIAN
+	.fb_read = smtcfb_read,
+	.fb_write = smtcfb_write,
+#endif
+
+};
+
+void smtcfb_setmode(struct smtcfb_info *sfb)
+{
+	switch (sfb->fb.var.bits_per_pixel) {
+	case 32:
+		sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+		sfb->fb.fix.line_length = sfb->fb.var.xres * 4;
+		sfb->fb.var.red.length = 8;
+		sfb->fb.var.green.length = 8;
+		sfb->fb.var.blue.length = 8;
+		sfb->fb.var.red.offset = 16;
+		sfb->fb.var.green.offset = 8;
+		sfb->fb.var.blue.offset = 0;
+
+		break;
+	case 8:
+		sfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		sfb->fb.fix.line_length = sfb->fb.var.xres;
+		sfb->fb.var.red.offset = 5;
+		sfb->fb.var.red.length = 3;
+		sfb->fb.var.green.offset = 2;
+		sfb->fb.var.green.length = 3;
+		sfb->fb.var.blue.offset = 0;
+		sfb->fb.var.blue.length = 2;
+		break;
+	case 24:
+		sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+		sfb->fb.fix.line_length = sfb->fb.var.xres * 3;
+		sfb->fb.var.red.length = 8;
+		sfb->fb.var.green.length = 8;
+		sfb->fb.var.blue.length = 8;
+
+		sfb->fb.var.red.offset = 16;
+		sfb->fb.var.green.offset = 8;
+		sfb->fb.var.blue.offset = 0;
+
+		break;
+	case 16:
+	default:
+		sfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+		sfb->fb.fix.line_length = sfb->fb.var.xres * 2;
+
+		sfb->fb.var.red.length = 5;
+		sfb->fb.var.green.length = 6;
+		sfb->fb.var.blue.length = 5;
+
+		sfb->fb.var.red.offset = 11;
+		sfb->fb.var.green.offset = 5;
+		sfb->fb.var.blue.offset = 0;
+
+		break;
+	}
+
+	hw.width = sfb->fb.var.xres;
+	hw.height = sfb->fb.var.yres;
+	hw.hz = 60;
+	smtc_set_timing(sfb, &hw);
+	if (smtc_2Dacceleration) {
+		printk("2D acceleration enabled!\n");
+		/* Init smtc drawing engine */
+		deInit(sfb->fb.var.xres, sfb->fb.var.yres,
+				sfb->fb.var.bits_per_pixel);
+	}
+}
+
+#if defined(CONFIG_FB_SM7XX_DUALHEAD)
+void smtc_head2_init(struct smtcfb_info *sfb)
+{
+	smtcfb_info2 = *sfb;
+	smtcfb_info2.fb.pseudo_palette = &colreg2;
+	smtcfb_info2.fb.par = &hw2;
+	sprintf(smtcfb_info2.fb.fix.id, "sm%Xfb2", hw.chipID);
+	hw2.chipID = hw.chipID;
+	hw2.chipRevID = hw.chipRevID;
+	hw2.width = smtcfb_info2.fb.var.xres;
+	hw2.height = smtcfb_info2.fb.var.yres;
+	hw2.hz = 60;
+	hw2.m_pMMIO = smtc_RegBaseAddress;
+
+	/*hard code 2nd head starting from half VRAM size postion */
+	hw2.BaseAddressInVRAM = smtcfb_info2.fb.fix.smem_len / 2;
+
+	hw2.m_pLFB = smtc_VRAMBaseAddress + hw2.BaseAddressInVRAM;
+	smtcfb_info2.fb.screen_base = hw2.m_pLFB;
+
+	writel(hw2.BaseAddressInVRAM >> 3, hw2.m_pVPR + 0x10);
+}
+#endif
+
+/*
+ * Alloc struct smtcfb_info and assign the default value
+ */
+static struct smtcfb_info *__devinit smtc_alloc_fb_info(struct pci_dev *dev,
+							char *name)
+{
+	struct smtcfb_info *sfb;
+
+	sfb = kmalloc(sizeof(struct smtcfb_info), GFP_KERNEL);
+
+	if (!sfb)
+		return NULL;
+
+	memset(sfb, 0, sizeof(struct smtcfb_info));
+
+	sfb->currcon = -1;
+	sfb->dev = dev;
+
+	/*** Init sfb->fb with default value ***/
+	sfb->fb.flags = FBINFO_FLAG_DEFAULT;
+	sfb->fb.fbops = &smtcfb_ops;
+	sfb->fb.var = smtcfb_var;
+	sfb->fb.fix = smtcfb_fix;
+
+	strcpy(sfb->fb.fix.id, name);
+
+	sfb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
+	sfb->fb.fix.type_aux = 0;
+	sfb->fb.fix.xpanstep = 0;
+	sfb->fb.fix.ypanstep = 0;
+	sfb->fb.fix.ywrapstep = 0;
+	sfb->fb.fix.accel = FB_ACCEL_SMI_LYNX;
+
+	sfb->fb.var.nonstd = 0;
+	sfb->fb.var.activate = FB_ACTIVATE_NOW;
+	sfb->fb.var.height = -1;
+	sfb->fb.var.width = -1;
+	/* text mode acceleration */
+	sfb->fb.var.accel_flags = FB_ACCELF_TEXT;
+	sfb->fb.var.vmode = FB_VMODE_NONINTERLACED;
+	sfb->fb.par = &hw;
+	sfb->fb.pseudo_palette = colreg;
+
+	return sfb;
+}
+
+/*
+ * Unmap in the memory mapped IO registers
+ */
+
+static void __devinit smtc_unmap_mmio(struct smtcfb_info *sfb)
+{
+	if (sfb && smtc_RegBaseAddress)
+		smtc_RegBaseAddress = NULL;
+}
+
+/*
+ * Map in the screen memory
+ */
+
+static int __devinit smtc_map_smem(struct smtcfb_info *sfb,
+		struct pci_dev *dev, u_long smem_len)
+{
+	if (sfb->fb.var.bits_per_pixel == 32) {
+#ifdef __BIG_ENDIAN
+		sfb->fb.fix.smem_start = pci_resource_start(dev, 0)
+			+ 0x800000;
+#else
+		sfb->fb.fix.smem_start = pci_resource_start(dev, 0);
+#endif
+	} else {
+		sfb->fb.fix.smem_start = pci_resource_start(dev, 0);
+	}
+
+	sfb->fb.fix.smem_len = smem_len;
+
+	sfb->fb.screen_base = smtc_VRAMBaseAddress;
+
+	if (!sfb->fb.screen_base) {
+		printk(KERN_INFO "%s: unable to map screen memory\n",
+				sfb->fb.fix.id);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
+ * Unmap in the screen memory
+ *
+ */
+static void __devinit smtc_unmap_smem(struct smtcfb_info *sfb)
+{
+	if (sfb && sfb->fb.screen_base) {
+		iounmap(sfb->fb.screen_base);
+		sfb->fb.screen_base = NULL;
+	}
+}
+
+/*
+ * We need to wake up the LynxEM+, and make sure its in linear memory mode.
+ */
+static inline void __devinit sm7xx_init_hw(void)
+{
+	outb_p(0x18, 0x3c4);
+	outb_p(0x11, 0x3c5);
+}
+
+static void __devinit smtc_free_fb_info(struct smtcfb_info *sfb)
+{
+	if (sfb) {
+		fb_alloc_cmap(&sfb->fb.cmap, 0, 0);
+		kfree(sfb);
+	}
+}
+
+static int __init smtcfb_init(void)
+{
+	struct smtcfb_info *sfb;
+	u_long smem_size = 0x00800000;	/* default 8MB */
+	char name[16];
+	int err, i = 0;
+	unsigned long pFramebufferPhysical;
+	struct pci_dev *pdev = NULL;
+
+	printk(KERN_INFO
+		"Silicon Motion display driver " SMTC_LINUX_FB_VERSION "\n");
+
+	/* init the global variable */
+	smtc_2Dacceleration = 0;	/* default no 2D acceleration */
+
+	do {
+		pdev = pci_get_device(0x126f, smtc_ChipIDs[i], pdev);
+		if (pdev == NULL) {
+			i++;
+		} else {
+			hw.chipID = smtc_ChipIDs[i];
+			break;
+		}
+	} while (i < numSMTCchipIDs);
+
+	err = pci_enable_device(pdev);	/* enable SMTC chip */
+
+	if (err)
+		return err;
+
+	err = -ENOMEM;
+
+	sprintf(name, "sm%Xfb", hw.chipID);
+
+	sfb = smtc_alloc_fb_info(pdev, name);
+
+	if (!sfb)
+		goto failed;
+
+	sm7xx_init_hw();
+
+	/*get mode parameter from smtc_screen_info */
+	if (smtc_screen_info.lfb_width != 0) {
+		sfb->fb.var.xres = smtc_screen_info.lfb_width;
+		sfb->fb.var.yres = smtc_screen_info.lfb_height;
+		sfb->fb.var.bits_per_pixel = smtc_screen_info.lfb_depth;
+	} else {
+		/* default resolution 1024x600 16bit mode */
+		sfb->fb.var.xres = SCREEN_X_RES;
+		sfb->fb.var.yres = SCREEN_Y_RES;
+		sfb->fb.var.bits_per_pixel = SCREEN_BPP;
+	}
+
+	smdbg("\nsfb->fb.var.bits_per_pixel = %d sm712be_flag = %d\n",
+	      sfb->fb.var.bits_per_pixel, sm712be_flag);
+#ifdef __BIG_ENDIAN
+	if (sm712be_flag == 1 && sfb->fb.var.bits_per_pixel == 24)
+		sfb->fb.var.bits_per_pixel = (smtc_screen_info.lfb_depth = 32);
+#endif
+	/* Map address and memory detection */
+	pFramebufferPhysical = pci_resource_start(pdev, 0);
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw.chipRevID);
+
+	switch (hw.chipID) {
+	case 0x710:
+	case 0x712:
+		sfb->fb.fix.mmio_start = pFramebufferPhysical + 0x00400000;
+		sfb->fb.fix.mmio_len = 0x00400000;
+		smem_size = SM712_VIDEOMEMORYSIZE;
+#ifdef __BIG_ENDIAN
+		hw.m_pLFB = (smtc_VRAMBaseAddress =
+		    ioremap(pFramebufferPhysical, 0x00c00000));
+#else
+		hw.m_pLFB = (smtc_VRAMBaseAddress =
+		    ioremap(pFramebufferPhysical, 0x00800000));
+#endif
+		hw.m_pMMIO = (smtc_RegBaseAddress =
+		    smtc_VRAMBaseAddress + 0x00700000);
+		smtc_2DBaseAddress = (hw.m_pDPR =
+		    smtc_VRAMBaseAddress + 0x00408000);
+		smtc_2Ddataport = smtc_VRAMBaseAddress + DE_DATA_PORT_712;
+		hw.m_pVPR = hw.m_pLFB + 0x0040c000;
+		if (sfb->fb.var.bits_per_pixel == 32) {
+#ifdef __BIG_ENDIAN
+			smtc_VRAMBaseAddress += 0x800000;
+			hw.m_pLFB += 0x800000;
+			printk(KERN_INFO
+				"\nsmtc_VRAMBaseAddress=%p hw.m_pLFB=%p\n",
+					smtc_VRAMBaseAddress, hw.m_pLFB);
+#endif
+		}
+		if (!smtc_RegBaseAddress) {
+
+			printk(KERN_INFO
+				"%s: unable to map memory mapped IO\n",
+				sfb->fb.fix.id);
+
+			return -ENOMEM;
+		}
+
+		/* set MCLK = 14.31818 * (0x16 / 0x2) */
+		smtc_seqw(0x6a, 0x16);
+		smtc_seqw(0x6b, 0x02);
+		smtc_seqw(0x62, 0x3e);
+		/* enable PCI burst */
+		smtc_seqw(0x17, 0x20);
+		/* enabel word swap */
+		if (sfb->fb.var.bits_per_pixel == 32) {
+#ifdef __BIG_ENDIAN
+			smtc_seqw(0x17, 0x30);
+#endif
+		}
+#ifdef CONFIG_FB_SM7XX_ACCEL
+		smtc_2Dacceleration = 1;
+#endif
+
+		break;
+
+	case 0x720:
+		sfb->fb.fix.mmio_start = pFramebufferPhysical;
+		sfb->fb.fix.mmio_len = 0x00200000;
+		smem_size = SM722_VIDEOMEMORYSIZE;
+		smtc_2DBaseAddress = (hw.m_pDPR =
+		    ioremap(pFramebufferPhysical, 0x00a00000));
+		hw.m_pLFB = (smtc_VRAMBaseAddress =
+		    smtc_2DBaseAddress + 0x00200000);
+		hw.m_pMMIO = (smtc_RegBaseAddress =
+		    smtc_2DBaseAddress + 0x000c0000);
+		smtc_2Ddataport = smtc_2DBaseAddress + DE_DATA_PORT_722;
+		hw.m_pVPR = smtc_2DBaseAddress + 0x800;
+
+		smtc_seqw(0x62, 0xff);
+		smtc_seqw(0x6a, 0x0d);
+		smtc_seqw(0x6b, 0x02);
+		smtc_2Dacceleration = 0;
+		break;
+	default:
+		printk(KERN_INFO
+		"No valid Silicon Motion display chip was detected!\n");
+
+		smtc_free_fb_info(sfb);
+		return err;
+	}
+
+	/* can support 32 bpp */
+	if (15 == sfb->fb.var.bits_per_pixel)
+		sfb->fb.var.bits_per_pixel = 16;
+
+	sfb->fb.var.xres_virtual = sfb->fb.var.xres;
+
+	sfb->fb.var.yres_virtual = sfb->fb.var.yres;
+	err = smtc_map_smem(sfb, pdev, smem_size);
+	if (err)
+		goto failed;
+
+	smtcfb_setmode(sfb);
+	/* Primary display starting from 0 postion */
+	hw.BaseAddressInVRAM = 0;
+	sfb->fb.par = &hw;
+
+	err = register_framebuffer(&sfb->fb);
+	if (err < 0)
+		goto failed;
+
+	printk(KERN_INFO "Silicon Motion SM%X Rev%X primary display mode"
+			"%dx%d-%d Init Complete.\n", hw.chipID, hw.chipRevID,
+			sfb->fb.var.xres, sfb->fb.var.yres,
+			sfb->fb.var.bits_per_pixel);
+
+#if defined(CONFIG_FB_SM7XX_DUALHEAD)
+	smtc_head2_init(sfb);
+	err = register_framebuffer(&smtcfb_info2.fb);
+
+	/* if second head display fails, also fails the primary display */
+	if (err < 0) {
+		printk(KERN_INFO
+			"Silicon Motion, Inc.  second head init fail\n");
+		goto failed;
+	}
+
+	printk(KERN_INFO "Silicon Motion SM%X Rev%X secondary display mode"
+			"%dx%d-%d Init Complete.\n", hw.chipID, hw.chipRevID,
+			hw2.width, hw2.height,
+			smtcfb_info2.fb.var.bits_per_pixel);
+#endif
+
+	return 0;
+
+ failed:
+	printk(KERN_INFO "Silicon Motion, Inc.  primary display init fail\n");
+
+	smtc_unmap_smem(sfb);
+	smtc_unmap_mmio(sfb);
+	smtc_free_fb_info(sfb);
+
+	return err;
+}
+
+static void __exit smtcfb_exit(void)
+{
+}
+
+module_init(smtcfb_init);
+module_exit(smtcfb_exit);
+
+/*
+ *	sm712be_setup - process command line options
+ *	@options: string of options
+ *	Returns zero.
+ *
+ */
+static int __init sm712be_setup(char *options)
+{
+	sm712be_flag = 0;
+	if (!options || !*options) {
+		smdbg("\n No sm712be parameter\n");
+		return -EINVAL;
+	}
+	if (strstr(options, "enable") != NULL)
+		sm712be_flag = 1;
+
+	smdbg("\nsm712be_setup = %s sm712be_flag = %d\n", options,
+	      sm712be_flag);
+
+	return 0;
+}
+
+__setup("sm712be=", sm712be_setup);
+
+/*
+ *	sm712vga_setup - process command line options, get vga parameter
+ *	@options: string of options
+ *	Returns zero.
+ *
+ */
+static int __init sm712vga_setup(char *options)
+{
+	int index;
+	sm712be_flag = 0;
+
+	if (!options || !*options) {
+		smdbg("\n No vga parameter\n");
+		return -EINVAL;
+	}
+
+	smtc_screen_info.lfb_width = 0;
+	smtc_screen_info.lfb_height = 0;
+	smtc_screen_info.lfb_depth = 0;
+
+	smdbg("\nsm712vga_setup = %s\n", options);
+
+	for (index = 0;
+	     index < (sizeof(vesa_mode) / sizeof(struct vesa_mode_table));
+	     index++) {
+		if (strstr(options, vesa_mode[index].mode_index)) {
+			smtc_screen_info.lfb_width = vesa_mode[index].lfb_width;
+			smtc_screen_info.lfb_height =
+					vesa_mode[index].lfb_height;
+			smtc_screen_info.lfb_depth = vesa_mode[index].lfb_depth;
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+__setup("vga=", sm712vga_setup);
+
+MODULE_AUTHOR("Siliconmotion ");
+MODULE_DESCRIPTION("Framebuffer driver for SMI Graphic Cards");
+MODULE_LICENSE("GPL");
diff -Nur linux-2.6.30.orig/drivers/video/sm7xx/smtcfb.h linux-2.6.30/drivers/video/sm7xx/smtcfb.h
--- linux-2.6.30.orig/drivers/video/sm7xx/smtcfb.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/drivers/video/sm7xx/smtcfb.h	2009-06-14 20:25:20.000000000 +0200
@@ -0,0 +1,793 @@
+/*
+ * smtcfb.h -- Silicon Motion SM7xx frame buffer device
+ *
+ * Copyright (C) 2006 Silicon Motion Technology Corp.
+ * Authors:	Ge Wang, gewang@siliconmotion.com
+ *	 	Boyod boyod.yang@siliconmotion.com.cn
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#define SMTC_LINUX_FB_VERSION	"version 0.11.2619.21.01 July 27, 2008"
+
+#define NR_PALETTE        256
+#define NR_RGB            2
+
+#define FB_ACCEL_SMI_LYNX 88
+
+#ifdef __BIG_ENDIAN
+#define PC_VGA            0
+#else
+#define PC_VGA            1
+#endif
+
+#define SCREEN_X_RES      1024
+#define SCREEN_Y_RES      600
+#define SCREEN_BPP        16
+
+#ifndef FIELD_OFFSET
+#define FIELD_OFSFET(type, field) \
+	((unsigned long) (PUCHAR) & (((type *)0)->field))
+#endif
+
+/*Assume SM712 graphics chip has 4MB VRAM */
+#define SM712_VIDEOMEMORYSIZE	  0x00400000
+/*Assume SM722 graphics chip has 8MB VRAM */
+#define SM722_VIDEOMEMORYSIZE	  0x00800000
+
+#define dac_reg	(0x3c8)
+#define dac_val	(0x3c9)
+
+extern char *smtc_RegBaseAddress;
+#define smtc_mmiowb(dat, reg)	writeb(dat, smtc_RegBaseAddress + reg)
+#define smtc_mmioww(dat, reg)	writew(dat, smtc_RegBaseAddress + reg)
+#define smtc_mmiowl(dat, reg)	writel(dat, smtc_RegBaseAddress + reg)
+
+#define smtc_mmiorb(reg)	readb(smtc_RegBaseAddress + reg)
+#define smtc_mmiorw(reg)	readw(smtc_RegBaseAddress + reg)
+#define smtc_mmiorl(reg)	readl(smtc_RegBaseAddress + reg)
+
+#define SIZE_SR00_SR04      (0x04 - 0x00 + 1)
+#define SIZE_SR10_SR24      (0x24 - 0x10 + 1)
+#define SIZE_SR30_SR75      (0x75 - 0x30 + 1)
+#define SIZE_SR80_SR93      (0x93 - 0x80 + 1)
+#define SIZE_SRA0_SRAF      (0xAF - 0xA0 + 1)
+#define SIZE_GR00_GR08      (0x08 - 0x00 + 1)
+#define SIZE_AR00_AR14      (0x14 - 0x00 + 1)
+#define SIZE_CR00_CR18      (0x18 - 0x00 + 1)
+#define SIZE_CR30_CR4D      (0x4D - 0x30 + 1)
+#define SIZE_CR90_CRA7      (0xA7 - 0x90 + 1)
+#define SIZE_VPR		(0x6C + 1)
+#define SIZE_DPR		(0x44 + 1)
+
+static inline void smtc_crtcw(int reg, int val)
+{
+	smtc_mmiowb(reg, 0x3d4);
+	smtc_mmiowb(val, 0x3d5);
+}
+
+static inline unsigned int smtc_crtcr(int reg)
+{
+	smtc_mmiowb(reg, 0x3d4);
+	return smtc_mmiorb(0x3d5);
+}
+
+static inline void smtc_grphw(int reg, int val)
+{
+	smtc_mmiowb(reg, 0x3ce);
+	smtc_mmiowb(val, 0x3cf);
+}
+
+static inline unsigned int smtc_grphr(int reg)
+{
+	smtc_mmiowb(reg, 0x3ce);
+	return smtc_mmiorb(0x3cf);
+}
+
+static inline void smtc_attrw(int reg, int val)
+{
+	smtc_mmiorb(0x3da);
+	smtc_mmiowb(reg, 0x3c0);
+	smtc_mmiorb(0x3c1);
+	smtc_mmiowb(val, 0x3c0);
+}
+
+static inline void smtc_seqw(int reg, int val)
+{
+	smtc_mmiowb(reg, 0x3c4);
+	smtc_mmiowb(val, 0x3c5);
+}
+
+static inline unsigned int smtc_seqr(int reg)
+{
+	smtc_mmiowb(reg, 0x3c4);
+	return smtc_mmiorb(0x3c5);
+}
+
+/* The next structure holds all information relevant for a specific video mode.
+ */
+
+struct ModeInit {
+	int mmSizeX;
+	int mmSizeY;
+	int bpp;
+	int hz;
+	unsigned char Init_MISC;
+	unsigned char Init_SR00_SR04[SIZE_SR00_SR04];
+	unsigned char Init_SR10_SR24[SIZE_SR10_SR24];
+	unsigned char Init_SR30_SR75[SIZE_SR30_SR75];
+	unsigned char Init_SR80_SR93[SIZE_SR80_SR93];
+	unsigned char Init_SRA0_SRAF[SIZE_SRA0_SRAF];
+	unsigned char Init_GR00_GR08[SIZE_GR00_GR08];
+	unsigned char Init_AR00_AR14[SIZE_AR00_AR14];
+	unsigned char Init_CR00_CR18[SIZE_CR00_CR18];
+	unsigned char Init_CR30_CR4D[SIZE_CR30_CR4D];
+	unsigned char Init_CR90_CRA7[SIZE_CR90_CRA7];
+};
+
+/**********************************************************************
+			 SM712 Mode table.
+ **********************************************************************/
+struct ModeInit VGAMode[] = {
+	{
+	 /*  mode#0: 640 x 480  16Bpp  60Hz */
+	 640, 480, 16, 60,
+	 /*  Init_MISC */
+	 0xE3,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x00, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x30, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
+	  0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
+	  0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
+	  0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
+	  0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
+	  0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
+	  0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
+	  0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
+	  0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
+	  0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
+	  0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
+	  0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
+	  0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
+	  0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
+	  },
+	 },
+	{
+	 /*  mode#1: 640 x 480  24Bpp  60Hz */
+	 640, 480, 24, 60,
+	 /*  Init_MISC */
+	 0xE3,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x00, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x30, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
+	  0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
+	  0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
+	  0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
+	  0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
+	  0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
+	  0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
+	  0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
+	  0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
+	  0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
+	  0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
+	  0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
+	  0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
+	  0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
+	  },
+	 },
+	{
+	 /*  mode#0: 640 x 480  32Bpp  60Hz */
+	 640, 480, 32, 60,
+	 /*  Init_MISC */
+	 0xE3,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x00, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xFF, 0xBE, 0xEF, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x30, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x32, 0x03, 0xA0, 0x09, 0xC0, 0x32, 0x32, 0x32,
+	  0x32, 0x32, 0x32, 0x32, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x32, 0x32, 0x32,
+	  0x04, 0x24, 0x63, 0x4F, 0x52, 0x0B, 0xDF, 0xEA,
+	  0x04, 0x50, 0x19, 0x32, 0x32, 0x00, 0x00, 0x32,
+	  0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x07, 0x82, 0x07, 0x04,
+	  0x00, 0x45, 0x30, 0x30, 0x40, 0x30,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x32,
+	  0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x32, 0x32,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
+	  0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xFF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0x5F, 0x4F, 0x4F, 0x00, 0x53, 0x1F, 0x0B, 0x3E,
+	  0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xEA, 0x0C, 0xDF, 0x50, 0x40, 0xDF, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0x03, 0x20,
+	  0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xFF, 0xFD,
+	  0x5F, 0x4F, 0x00, 0x54, 0x00, 0x0B, 0xDF, 0x00,
+	  0xEA, 0x0C, 0x2E, 0x00, 0x4F, 0xDF,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x56, 0xDD, 0x5E, 0xEA, 0x87, 0x44, 0x8F, 0x55,
+	  0x0A, 0x8F, 0x55, 0x0A, 0x00, 0x00, 0x18, 0x00,
+	  0x11, 0x10, 0x0B, 0x0A, 0x0A, 0x0A, 0x0A, 0x00,
+	  },
+	 },
+
+	{			/*  mode#2: 800 x 600  16Bpp  60Hz */
+	 800, 600, 16, 60,
+	 /*  Init_MISC */
+	 0x2B,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x03, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x30, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x34, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24,
+	  0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24,
+	  0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
+	  0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24,
+	  0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
+	  0x02, 0x45, 0x30, 0x35, 0x40, 0x20,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24,
+	  0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
+	  0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
+	  0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
+	  0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
+	  0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
+	  0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
+	  0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
+	  0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
+	  },
+	 },
+	{			/*  mode#3: 800 x 600  24Bpp  60Hz */
+	 800, 600, 24, 60,
+	 0x2B,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x03, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x30, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x36, 0x03, 0x20, 0x09, 0xC0, 0x36, 0x36, 0x36,
+	  0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x36, 0x36, 0x36,
+	  0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
+	  0x04, 0x55, 0x59, 0x36, 0x36, 0x00, 0x00, 0x36,
+	  0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
+	  0x02, 0x45, 0x30, 0x30, 0x40, 0x20,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0xFF, 0x07, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x36,
+	  0xF7, 0x00, 0x00, 0x00, 0xEF, 0xFF, 0x36, 0x36,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
+	  0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
+	  0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
+	  0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
+	  0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
+	  0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
+	  0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
+	  0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
+	  },
+	 },
+	{			/*  mode#7: 800 x 600  32Bpp  60Hz */
+	 800, 600, 32, 60,
+	 /*  Init_MISC */
+	 0x2B,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x03, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xFF, 0xBE, 0xEE, 0xFF, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x30, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x34, 0x03, 0x20, 0x09, 0xC0, 0x24, 0x24, 0x24,
+	  0x24, 0x24, 0x24, 0x24, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x38, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x24, 0x24, 0x24,
+	  0x04, 0x48, 0x83, 0x63, 0x68, 0x72, 0x57, 0x58,
+	  0x04, 0x55, 0x59, 0x24, 0x24, 0x00, 0x00, 0x24,
+	  0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x1C, 0x85, 0x35, 0x13,
+	  0x02, 0x45, 0x30, 0x35, 0x40, 0x20,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0x00, 0x00, 0x00, 0x6F, 0x7F, 0x7F, 0xFF, 0x24,
+	  0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x24, 0x24,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFF, 0xBF, 0xFF, 0xFF, 0xED, 0xED, 0xED,
+	  0x7B, 0xFF, 0xFF, 0xFF, 0xBF, 0xEF, 0xBF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0x7F, 0x63, 0x63, 0x00, 0x68, 0x18, 0x72, 0xF0,
+	  0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0x58, 0x0C, 0x57, 0x64, 0x40, 0x57, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x03, 0x20,
+	  0x00, 0x00, 0x00, 0x40, 0x00, 0xE7, 0xBF, 0xFD,
+	  0x7F, 0x63, 0x00, 0x69, 0x18, 0x72, 0x57, 0x00,
+	  0x58, 0x0C, 0xE0, 0x20, 0x63, 0x57,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x56, 0x4B, 0x5E, 0x55, 0x86, 0x9D, 0x8E, 0xAA,
+	  0xDB, 0x2A, 0xDF, 0x33, 0x00, 0x00, 0x18, 0x00,
+	  0x20, 0x1F, 0x1A, 0x19, 0x0F, 0x0F, 0x0F, 0x00,
+	  },
+	 },
+	/* We use 1024x768 table to light 1024x600 panel for lemote */
+	{			/*  mode#4: 1024 x 600  16Bpp  60Hz  */
+	 1024, 600, 16, 60,
+	 /*  Init_MISC */
+	 0xEB,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x00, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xC8, 0x40, 0x14, 0x60, 0x00, 0x0A, 0x17, 0x20,
+	  0x51, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x30, 0x02, 0x00, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x22, 0x03, 0x24, 0x09, 0xC0, 0x22, 0x22, 0x22,
+	  0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x22, 0x22, 0x22,
+	  0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03,
+	  0x00, 0x60, 0x59, 0x22, 0x22, 0x00, 0x00, 0x22,
+	  0x01, 0x80, 0x7A, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x16, 0x02, 0x0D, 0x82, 0x09, 0x02,
+	  0x04, 0x45, 0x3F, 0x30, 0x40, 0x20,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A,
+	  0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED,
+	  0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5,
+	  0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20,
+	  0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF,
+	  0xA3, 0x7F, 0x00, 0x82, 0x0b, 0x6f, 0x57, 0x00,
+	  0x5c, 0x0f, 0xE0, 0xe0, 0x7F, 0x57,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26,
+	  0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00,
+	  0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
+	  },
+	 },
+	{			/*  mode#5: 1024 x 768  24Bpp  60Hz */
+	 1024, 768, 24, 60,
+	 /*  Init_MISC */
+	 0xEB,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x03, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x30, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A,
+	  0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A,
+	  0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03,
+	  0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A,
+	  0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02,
+	  0x04, 0x45, 0x30, 0x30, 0x40, 0x20,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A,
+	  0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED,
+	  0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5,
+	  0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20,
+	  0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF,
+	  0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00,
+	  0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26,
+	  0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00,
+	  0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
+	  },
+	 },
+	{			/*  mode#4: 1024 x 768  32Bpp  60Hz */
+	 1024, 768, 32, 60,
+	 /*  Init_MISC */
+	 0xEB,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x03, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x32, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A,
+	  0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A,
+	  0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03,
+	  0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A,
+	  0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02,
+	  0x04, 0x45, 0x30, 0x30, 0x40, 0x20,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A,
+	  0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED,
+	  0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5,
+	  0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20,
+	  0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF,
+	  0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00,
+	  0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26,
+	  0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00,
+	  0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
+	  },
+	 },
+	{			/*  mode#6: 320 x 240  16Bpp  60Hz */
+	 320, 240, 16, 60,
+	 /*  Init_MISC */
+	 0xEB,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x03, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x32, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A,
+	  0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A,
+	  0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03,
+	  0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A,
+	  0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43,
+	  0x04, 0x45, 0x30, 0x30, 0x40, 0x20,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A,
+	  0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED,
+	  0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5,
+	  0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20,
+	  0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF,
+	  0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00,
+	  0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26,
+	  0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00,
+	  0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
+	  },
+	 },
+
+	{			/*  mode#8: 320 x 240  32Bpp  60Hz */
+	 320, 240, 32, 60,
+	 /*  Init_MISC */
+	 0xEB,
+	 {			/*  Init_SR0_SR4 */
+	  0x03, 0x01, 0x0F, 0x03, 0x0E,
+	  },
+	 {			/*  Init_SR10_SR24 */
+	  0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C,
+	  0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0xC4, 0x32, 0x02, 0x01, 0x01,
+	  },
+	 {			/*  Init_SR30_SR75 */
+	  0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A,
+	  0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF,
+	  0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC,
+	  0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A,
+	  0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03,
+	  0x00, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A,
+	  0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00,
+	  0x50, 0x03, 0x74, 0x14, 0x08, 0x43, 0x08, 0x43,
+	  0x04, 0x45, 0x30, 0x30, 0x40, 0x20,
+	  },
+	 {			/*  Init_SR80_SR93 */
+	  0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A,
+	  0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A,
+	  0x00, 0x00, 0x00, 0x00,
+	  },
+	 {			/*  Init_SRA0_SRAF */
+	  0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED,
+	  0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF,
+	  },
+	 {			/*  Init_GR00_GR08 */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F,
+	  0xFF,
+	  },
+	 {			/*  Init_AR00_AR14 */
+	  0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+	  0x41, 0x00, 0x0F, 0x00, 0x00,
+	  },
+	 {			/*  Init_CR00_CR18 */
+	  0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5,
+	  0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	  0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3,
+	  0xFF,
+	  },
+	 {			/*  Init_CR30_CR4D */
+	  0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20,
+	  0x00, 0x00, 0x30, 0x40, 0x00, 0xFF, 0xBF, 0xFF,
+	  0x2E, 0x27, 0x00, 0x2b, 0x0c, 0x0F, 0xEF, 0x00,
+	  0xFe, 0x0f, 0x01, 0xC0, 0x27, 0xEF,
+	  },
+	 {			/*  Init_CR90_CRA7 */
+	  0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26,
+	  0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00,
+	  0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03,
+	  },
+	 },
+};
+
+#define numVGAModes		(sizeof(VGAMode) / sizeof(struct ModeInit))
diff -Nur linux-2.6.30.orig/fs/autofs4/waitq.c linux-2.6.30/fs/autofs4/waitq.c
--- linux-2.6.30.orig/fs/autofs4/waitq.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/fs/autofs4/waitq.c	2009-06-14 20:25:20.000000000 +0200
@@ -297,14 +297,20 @@
 	 */
 	if (notify == NFY_MOUNT) {
 		/*
-		 * If the dentry was successfully mounted while we slept
-		 * on the wait queue mutex we can return success. If it
-		 * isn't mounted (doesn't have submounts for the case of
-		 * a multi-mount with no mount at it's base) we can
-		 * continue on and create a new request.
-		 */
-		if (have_submounts(dentry))
-			return 0;
+		 * If the dentry isn't hashed just go ahead and try the
+		 * mount again with a new wait (not much else we can do).
+		*/
+		if (!d_unhashed(dentry)) {
+			/*
+			 * But if the dentry is hashed, that means that we
+			 * got here through the revalidate path.  Thus, we
+			 * need to check if the dentry has been mounted
+			 * while we waited on the wq_mutex. If it has,
+			 * simply return success.
+			 */
+			if (d_mountpoint(dentry))
+				return 0;
+		}
 	}
 
 	return 1;
diff -Nur linux-2.6.30.orig/fs/jbd/commit.c linux-2.6.30/fs/jbd/commit.c
--- linux-2.6.30.orig/fs/jbd/commit.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/fs/jbd/commit.c	2009-06-14 20:25:20.000000000 +0200
@@ -241,7 +241,7 @@
 			spin_lock(&journal->j_list_lock);
 		}
 		/* Someone already cleaned up the buffer? */
-		if (!buffer_jbd(bh) || bh2jh(bh) != jh
+		if (!buffer_jbd(bh)
 			|| jh->b_transaction != commit_transaction
 			|| jh->b_jlist != BJ_SyncData) {
 			jbd_unlock_bh_state(bh);
@@ -478,9 +478,7 @@
 			spin_lock(&journal->j_list_lock);
 			continue;
 		}
-		if (buffer_jbd(bh) && bh2jh(bh) == jh &&
-		    jh->b_transaction == commit_transaction &&
-		    jh->b_jlist == BJ_Locked) {
+		if (buffer_jbd(bh) && jh->b_jlist == BJ_Locked) {
 			__journal_unfile_buffer(jh);
 			jbd_unlock_bh_state(bh);
 			journal_remove_journal_head(bh);
diff -Nur linux-2.6.30.orig/.gitignore linux-2.6.30/.gitignore
--- linux-2.6.30.orig/.gitignore	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/.gitignore	2009-06-14 20:25:19.000000000 +0200
@@ -32,6 +32,7 @@
 tags
 TAGS
 vmlinux
+vmlinux.32
 System.map
 Module.markers
 Module.symvers
diff -Nur linux-2.6.30.orig/include/linux/cpumask.h linux-2.6.30/include/linux/cpumask.h
--- linux-2.6.30.orig/include/linux/cpumask.h	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/include/linux/cpumask.h	2009-06-14 20:25:20.000000000 +0200
@@ -1022,8 +1022,6 @@
 
 bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
 bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
-bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
-bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
 void alloc_bootmem_cpumask_var(cpumask_var_t *mask);
 void free_cpumask_var(cpumask_var_t mask);
 void free_bootmem_cpumask_var(cpumask_var_t mask);
@@ -1042,19 +1040,6 @@
 	return true;
 }
 
-static inline bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
-{
-	cpumask_clear(*mask);
-	return true;
-}
-
-static inline bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags,
-					  int node)
-{
-	cpumask_clear(*mask);
-	return true;
-}
-
 static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask)
 {
 }
diff -Nur linux-2.6.30.orig/ipc/shm.c linux-2.6.30/ipc/shm.c
--- linux-2.6.30.orig/ipc/shm.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/ipc/shm.c	2009-06-14 20:25:20.000000000 +0200
@@ -969,13 +969,10 @@
 SYSCALL_DEFINE1(shmdt, char __user *, shmaddr)
 {
 	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
+	struct vm_area_struct *vma, *next;
 	unsigned long addr = (unsigned long)shmaddr;
-	int retval = -EINVAL;
-#ifdef CONFIG_MMU
 	loff_t size = 0;
-	struct vm_area_struct *next;
-#endif
+	int retval = -EINVAL;
 
 	if (addr & ~PAGE_MASK)
 		return retval;
diff -Nur linux-2.6.30.orig/kernel/sched_cpupri.c linux-2.6.30/kernel/sched_cpupri.c
--- linux-2.6.30.orig/kernel/sched_cpupri.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/kernel/sched_cpupri.c	2009-06-14 20:25:20.000000000 +0200
@@ -165,7 +165,7 @@
 		vec->count = 0;
 		if (bootmem)
 			alloc_bootmem_cpumask_var(&vec->mask);
-		else if (!zalloc_cpumask_var(&vec->mask, GFP_KERNEL))
+		else if (!alloc_cpumask_var(&vec->mask, GFP_KERNEL))
 			goto cleanup;
 	}
 
diff -Nur linux-2.6.30.orig/kernel/sched_rt.c linux-2.6.30/kernel/sched_rt.c
--- linux-2.6.30.orig/kernel/sched_rt.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/kernel/sched_rt.c	2009-06-14 20:25:20.000000000 +0200
@@ -1591,7 +1591,7 @@
 	unsigned int i;
 
 	for_each_possible_cpu(i)
-		zalloc_cpumask_var_node(&per_cpu(local_cpu_mask, i),
+		alloc_cpumask_var_node(&per_cpu(local_cpu_mask, i),
 					GFP_KERNEL, cpu_to_node(i));
 }
 #endif /* CONFIG_SMP */
diff -Nur linux-2.6.30.orig/kernel/smp.c linux-2.6.30/kernel/smp.c
--- linux-2.6.30.orig/kernel/smp.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/kernel/smp.c	2009-06-14 20:25:20.000000000 +0200
@@ -52,7 +52,7 @@
 	switch (action) {
 	case CPU_UP_PREPARE:
 	case CPU_UP_PREPARE_FROZEN:
-		if (!zalloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL,
+		if (!alloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL,
 				cpu_to_node(cpu)))
 			return NOTIFY_BAD;
 		break;
diff -Nur linux-2.6.30.orig/lib/cpumask.c linux-2.6.30/lib/cpumask.c
--- linux-2.6.30.orig/lib/cpumask.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/lib/cpumask.c	2009-06-14 20:25:20.000000000 +0200
@@ -119,12 +119,6 @@
 }
 EXPORT_SYMBOL(alloc_cpumask_var_node);
 
-bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node)
-{
-	return alloc_cpumask_var_node(mask, flags | __GFP_ZERO, node);
-}
-EXPORT_SYMBOL(zalloc_cpumask_var_node);
-
 /**
  * alloc_cpumask_var - allocate a struct cpumask
  * @mask: pointer to cpumask_var_t where the cpumask is returned
@@ -141,12 +135,6 @@
 }
 EXPORT_SYMBOL(alloc_cpumask_var);
 
-bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
-{
-	return alloc_cpumask_var(mask, flags | __GFP_ZERO);
-}
-EXPORT_SYMBOL(zalloc_cpumask_var);
-
 /**
  * alloc_bootmem_cpumask_var - allocate a struct cpumask from the bootmem arena.
  * @mask: pointer to cpumask_var_t where the cpumask is returned
diff -Nur linux-2.6.30.orig/net/sched/cls_cgroup.c linux-2.6.30/net/sched/cls_cgroup.c
--- linux-2.6.30.orig/net/sched/cls_cgroup.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/net/sched/cls_cgroup.c	2009-06-14 20:25:20.000000000 +0200
@@ -167,9 +167,6 @@
 	struct tcf_exts e;
 	int err;
 
-	if (!tca[TCA_OPTIONS])
-		return -EINVAL;
-
 	if (head == NULL) {
 		if (!handle)
 			return -EINVAL;
diff -Nur linux-2.6.30.orig/sound/core/pcm_native.c linux-2.6.30/sound/core/pcm_native.c
--- linux-2.6.30.orig/sound/core/pcm_native.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/sound/core/pcm_native.c	2009-06-14 20:25:20.000000000 +0200
@@ -3091,7 +3091,11 @@
 			return VM_FAULT_SIGBUS;
 	} else {
 		vaddr = runtime->dma_area + offset;
+#if defined(__mips__) && defined(CONFIG_DMA_NONCOHERENT)
+		page = virt_to_page(CAC_ADDR(vaddr));
+#else
 		page = virt_to_page(vaddr);
+#endif
 	}
 	get_page(page);
 	vmf->page = page;
@@ -3206,6 +3210,11 @@
 	if (PCM_RUNTIME_CHECK(substream))
 		return -ENXIO;
 
+#if defined(__mips__) && defined(CONFIG_DMA_NONCOHERENT)
+	/* all mmap using uncached mode */
+	area->vm_page_prot = pgprot_noncached(area->vm_page_prot);
+	area->vm_flags |= (VM_RESERVED | VM_IO);
+#endif
 	offset = area->vm_pgoff << PAGE_SHIFT;
 	switch (offset) {
 	case SNDRV_PCM_MMAP_OFFSET_STATUS:
diff -Nur linux-2.6.30.orig/sound/core/sgbuf.c linux-2.6.30/sound/core/sgbuf.c
--- linux-2.6.30.orig/sound/core/sgbuf.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/sound/core/sgbuf.c	2009-06-14 20:25:20.000000000 +0200
@@ -114,7 +114,11 @@
 			if (!i)
 				table->addr |= chunk; /* mark head */
 			table++;
+#if defined(__mips__) && defined(CONFIG_DMA_NONCOHERENT)
+			*pgtable++ = virt_to_page(CAC_ADDR(tmpb.area));
+#else
 			*pgtable++ = virt_to_page(tmpb.area);
+#endif
 			tmpb.area += PAGE_SIZE;
 			tmpb.addr += PAGE_SIZE;
 		}
@@ -125,7 +129,12 @@
 	}
 
 	sgbuf->size = size;
+#if defined(__mips__) && defined(CONFIG_DMA_NONCOHERENT)
+	dmab->area = vmap(sgbuf->page_table, sgbuf->pages, \
+			VM_MAP | VM_IO, pgprot_noncached(PAGE_KERNEL));
+#else
 	dmab->area = vmap(sgbuf->page_table, sgbuf->pages, VM_MAP, PAGE_KERNEL);
+#endif
 	if (! dmab->area)
 		goto _failed;
 	if (res_size)
diff -Nur linux-2.6.30.orig/sound/pci/Kconfig linux-2.6.30/sound/pci/Kconfig
--- linux-2.6.30.orig/sound/pci/Kconfig	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/sound/pci/Kconfig	2009-06-14 20:25:20.000000000 +0200
@@ -259,7 +259,6 @@
 
 config SND_CS5535AUDIO
 	tristate "CS5535/CS5536 Audio"
-	depends on X86 && !X86_64
 	select SND_PCM
 	select SND_AC97_CODEC
 	help
diff -Nur linux-2.6.30.orig/virt/kvm/kvm_main.c linux-2.6.30/virt/kvm/kvm_main.c
--- linux-2.6.30.orig/virt/kvm/kvm_main.c	2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/virt/kvm/kvm_main.c	2009-06-14 20:25:20.000000000 +0200
@@ -2301,7 +2301,7 @@
 
 	bad_pfn = page_to_pfn(bad_page);
 
-	if (!zalloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) {
+	if (!alloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) {
 		r = -ENOMEM;
 		goto out_free_0;
 	}