diff -Nur linux-2.6.32.2.orig/arch/arm/Kconfig linux-2.6.32.2/arch/arm/Kconfig --- linux-2.6.32.2.orig/arch/arm/Kconfig 2009-12-18 23:27:07.000000000 +0100 +++ linux-2.6.32.2/arch/arm/Kconfig 2010-02-17 19:41:01.000000000 +0100 @@ -18,6 +18,9 @@ select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_GENERIC_DMA_COHERENT + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.32.2/arch/arm/mach-at91/at91sam9260_devices.c --- linux-2.6.32.2.orig/arch/arm/mach-at91/at91sam9260_devices.c 2009-12-18 23:27:07.000000000 +0100 +++ linux-2.6.32.2/arch/arm/mach-at91/at91sam9260_devices.c 2010-02-17 19:41:01.000000000 +0100 @@ -454,7 +454,15 @@ .sda_is_open_drain = 1, .scl_pin = AT91_PIN_PA24, .scl_is_open_drain = 1, +#if defined(CONFIG_MACH_FOXG20) + /* Some I2C devices are limited to 100 kHz and i2c-gpio.h + * says "frequency is (500 / udelay) kHz" so 5 is best (and is + * used in i2c-gpio.c) + */ + .udelay = 5, /* ~100 kHz */ +#else .udelay = 2, /* ~100 kHz */ +#endif }; static struct platform_device at91sam9260_twi_device = { diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/board-foxg20.c linux-2.6.32.2/arch/arm/mach-at91/board-foxg20.c --- linux-2.6.32.2.orig/arch/arm/mach-at91/board-foxg20.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.32.2/arch/arm/mach-at91/board-foxg20.c 2010-02-17 19:41:01.000000000 +0100 @@ -0,0 +1,371 @@ +/* + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * Copyright (C) 2010 Lee McLoughlin - lee@lmmrtech.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "sam9_smc.h" +#include "generic.h" + +/* + * The FOX hardware comes as the "Netus" board with just the cpu, ram, + * dataflash and two header connectors. This is plugged into the Fox board + * which provides the ethernet, usb, rtc, leds, switch, ... + * Other version of the Fox board are planned which could contain + * both NAND and sound (WM8731). + * + * By default USART4 and USART5 are not enabled (freeing up those pins + * for general use) + * + * Note: Enabling the NAND without a NAND device present doesn't cause + * any issues as on boot the probe will fail. + */ +/* #define FOXG20_NAND */ +/* #define FOXG20_WM8731 */ +/* #define FOX_USART4 */ +/* #define FOX_USART5 */ + +static void __init foxg20_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART2 on ttyS3. (Rx & Tx only) */ + at91_register_uart(AT91SAM9260_ID_US2, 3, 0); + + /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_CTS | ATMEL_UART_RTS); + +#if defined(FOX_USART4) + /* USART4 on ttyS5. (Rx & Tx only) */ + at91_register_uart(AT91SAM9260_ID_US4, 5, 0); +#endif + +#if defined(FOX_USART5) + /* USART5 on ttyS6. (Rx & Tx only) */ + at91_register_uart(AT91SAM9260_ID_US5, 6, 0); +#endif + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init foxg20_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + + +/* + * USB Host port + */ +static struct at91_usbh_data __initdata foxg20_usbh_data = { + .ports = 2, +}; + +/* + * USB Device port + */ +static struct at91_udc_data __initdata foxg20_udc_data = { + .vbus_pin = AT91_PIN_PC6, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + + +/* + * SPI devices. + */ +static struct spi_board_info foxg20_spi_devices[] = { +#if !defined(CONFIG_MMC_AT91) + { + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +#endif +}; + + +/* + * MACB Ethernet device + */ +static struct at91_eth_data __initdata foxg20_macb_data = { + .phy_irq_pin = AT91_PIN_PA7, + .is_rmii = 1, +}; + + +#ifdef FOXG20_NAND +/* The Fox doesn't have NAND memory */ +/* + * NAND flash + */ +static struct mtd_partition __initdata foxg20_nand_partition[] = { + { + .name = "Bootstrap", + .offset = 0, + .size = 4 * SZ_1M, + }, + { + .name = "Partition 1", + .offset = MTDPART_OFS_NXTBLK, + .size = 60 * SZ_1M, + }, + { + .name = "Partition 2", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(foxg20_nand_partition); + return foxg20_nand_partition; +} + +/* det_pin is not connected */ +static struct atmel_nand_data __initdata foxg20_nand_data = { + .ale = 21, + .cle = 22, + .rdy_pin = AT91_PIN_PC13, + .enable_pin = AT91_PIN_PC14, + .partition_info = nand_partitions, +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) + .bus_width_16 = 1, +#else + .bus_width_16 = 0, +#endif +}; + +static struct sam9_smc_config __initdata foxg20_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 2, + .ncs_write_setup = 0, + .nwe_setup = 2, + + .ncs_read_pulse = 4, + .nrd_pulse = 4, + .ncs_write_pulse = 4, + .nwe_pulse = 4, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, + .tdf_cycles = 3, +}; + +static void __init foxg20_add_device_nand(void) +{ + /* setup bus-width (8 or 16) */ + if (foxg20_nand_data.bus_width_16) + foxg20_nand_smc_config.mode |= AT91_SMC_DBW_16; + else + foxg20_nand_smc_config.mode |= AT91_SMC_DBW_8; + + /* configure chip-select 3 (NAND) */ + sam9_smc_configure(3, &foxg20_nand_smc_config); + + at91_add_device_nand(&foxg20_nand_data); +} +#endif + + +/* + * MCI (SD/MMC) + * det_pin, wp_pin and vcc_pin are not connected + */ +static struct at91_mmc_data __initdata foxg20_mmc_data = { + .slot_b = 1, + .wire4 = 1, +}; + + +/* + * LEDs + */ +static struct gpio_led foxg20_leds[] = { + { /* user led, red */ + .name = "user_led", + .gpio = AT91_PIN_PC7, + .active_low = 0, + .default_trigger = "heartbeat", + }, +}; + + +/* + * GPIO Buttons + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button foxg20_buttons[] = { + { + .gpio = AT91_PIN_PC4, + .code = BTN_1, + .desc = "Button 1", + .active_low = 1, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data foxg20_button_data = { + .buttons = foxg20_buttons, + .nbuttons = ARRAY_SIZE(foxg20_buttons), +}; + +static struct platform_device foxg20_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &foxg20_button_data, + } +}; + +static void __init foxg20_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PC4, 1); /* btn1 */ + at91_set_deglitch(AT91_PIN_PC4, 1); + + platform_device_register(&foxg20_button_device); +} +#else +static void __init foxg20_add_device_buttons(void) {} +#endif + + +#if !defined(FOXG20_WM8731) +#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) +static struct w1_gpio_platform_data w1_gpio_pdata = { + /* If you choose to use a pin other than PB16 it needs to be 3.3V */ + .pin = AT91_PIN_PB16, + .is_open_drain = 1, +}; + +static struct platform_device w1_device = { + .name = "w1-gpio", + .id = -1, + .dev.platform_data = &w1_gpio_pdata, +}; + +static void __init at91_add_device_w1(void) +{ + at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); + at91_set_multi_drive(w1_gpio_pdata.pin, 1); + platform_device_register(&w1_device); +} + +#endif +#endif + + +static struct i2c_board_info __initdata foxg20_i2c_devices[] = { + { + I2C_BOARD_INFO("24c512", 0x50), +#ifdef FOXG20_WM8731 + I2C_BOARD_INFO("wm8731", 0x1b), +#endif + }, +}; + + +static void __init foxg20_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&foxg20_usbh_data); + /* USB Device */ + at91_add_device_udc(&foxg20_udc_data); + /* SPI */ + at91_add_device_spi(foxg20_spi_devices, ARRAY_SIZE(foxg20_spi_devices)); +#ifdef FOXG20_NAND + /* The Fox doesn't have NAND memory */ + /* NAND */ + foxg20_add_device_nand(); +#endif + /* Ethernet */ + at91_add_device_eth(&foxg20_macb_data); + /* MMC */ + at91_add_device_mmc(0, &foxg20_mmc_data); + /* I2C */ + at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices)); + /* LEDs */ + at91_gpio_leds(foxg20_leds, ARRAY_SIZE(foxg20_leds)); + /* Push Buttons */ + foxg20_add_device_buttons(); +#ifdef FOXG20_WM8731 + /* The Fox doesn't have this sound chip */ + /* PCK0 provides MCLK to the WM8731 */ + at91_set_B_periph(AT91_PIN_PC1, 0); + /* SSC (for WM8731) */ + at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); +#else +#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) + at91_add_device_w1(); +#endif +#endif +} + +MACHINE_START(AT91SAM9G20EK, "Acme Systems FOXG20") + /* Maintainer: Lee McLoughlin */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = foxg20_map_io, + .init_irq = foxg20_init_irq, + .init_machine = foxg20_board_init, +MACHINE_END diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/Kconfig linux-2.6.32.2/arch/arm/mach-at91/Kconfig --- linux-2.6.32.2.orig/arch/arm/mach-at91/Kconfig 2009-12-18 23:27:07.000000000 +0100 +++ linux-2.6.32.2/arch/arm/mach-at91/Kconfig 2010-02-17 19:41:01.000000000 +0100 @@ -333,6 +333,13 @@ Select this if you are using a Eukrea Electromatique's CPU9G20 Board +config MACH_FOXG20 + bool "Acme Systems FOX G20" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using Acme Systems + FOX Board G20 + endif # ---------------------------------------------------------- @@ -388,13 +395,13 @@ config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" - depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926) + depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926 || MACH_FOXG20) help Enable support for the DataFlash card. config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) + depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK || MACH_FOXG20) help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). diff -Nur linux-2.6.32.2.orig/arch/arm/mach-at91/Makefile linux-2.6.32.2/arch/arm/mach-at91/Makefile --- linux-2.6.32.2.orig/arch/arm/mach-at91/Makefile 2009-12-18 23:27:07.000000000 +0100 +++ linux-2.6.32.2/arch/arm/mach-at91/Makefile 2010-02-17 19:41:01.000000000 +0100 @@ -65,6 +65,9 @@ # AT91SAM9G45 board-specific support obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o +# FOXG20 board-specific support +obj-$(CONFIG_MACH_FOXG20) += board-foxg20.o + # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o diff -Nur linux-2.6.32.2.orig/drivers/mmc/host/at91_mci.c linux-2.6.32.2/drivers/mmc/host/at91_mci.c --- linux-2.6.32.2.orig/drivers/mmc/host/at91_mci.c 2009-12-18 23:27:07.000000000 +0100 +++ linux-2.6.32.2/drivers/mmc/host/at91_mci.c 2010-02-17 19:41:01.000000000 +0100 @@ -461,7 +461,7 @@ at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); mr = AT91_MCI_PDCMODE | 0x34a; - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; at91_mci_write(host, AT91_MCI_MR, mr); @@ -1017,7 +1017,7 @@ host->bus_mode = 0; host->board = pdev->dev.platform_data; if (host->board->wire4) { - if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) mmc->caps |= MMC_CAP_4_BIT_DATA; else dev_warn(&pdev->dev, "4 wire bus mode not supported"