--- valgrind-3.7.0.orig/Makefile.in 2011-11-05 12:26:55.000000000 +0100
+++ valgrind-3.7.0/Makefile.in 2013-07-23 12:27:52.000000000 +0200
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.10.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -26,9 +26,8 @@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
@@ -63,7 +62,6 @@ mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = valgrind.spec valgrind.pc glibc-2.X.supp \
drd/scripts/download-and-build-splash2
-CONFIG_CLEAN_VPATH_FILES =
SCRIPTS = $(dist_noinst_SCRIPTS)
SOURCES =
DIST_SOURCES =
@@ -79,65 +77,25 @@ am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkglibdir)" \
"$(DESTDIR)$(pkgincludedir)"
+pkgconfigDATA_INSTALL = $(INSTALL_DATA)
+pkglibDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_noinst_DATA) $(pkgconfig_DATA) $(pkglib_DATA)
+pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
HEADERS = $(pkginclude_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
- { test ! -d "$(distdir)" \
- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr "$(distdir)"; }; }
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
@@ -224,6 +182,7 @@ VERSION = @VERSION@
VGCONF_ARCH_PRI = @VGCONF_ARCH_PRI@
VGCONF_ARCH_SEC = @VGCONF_ARCH_SEC@
VGCONF_OS = @VGCONF_OS@
+VGCONF_PLATFORM_ARM_ARCH = @VGCONF_PLATFORM_ARM_ARCH@
VGCONF_PLATFORM_PRI_CAPS = @VGCONF_PLATFORM_PRI_CAPS@
VGCONF_PLATFORM_SEC_CAPS = @VGCONF_PLATFORM_SEC_CAPS@
VGCONF_PLATVARIANT = @VGCONF_PLATVARIANT@
@@ -362,10 +321,10 @@ AM_CFLAGS_PPC64_LINUX = @FLAG_M64@ $(AM_
AM_CCASFLAGS_PPC64_LINUX = $(AM_CPPFLAGS_PPC64_LINUX) @FLAG_M64@ -g
AM_FLAG_M3264_ARM_LINUX = @FLAG_M32@
AM_CFLAGS_ARM_LINUX = @FLAG_M32@ @PREFERRED_STACK_BOUNDARY@ \
- $(AM_CFLAGS_BASE) -marm -mcpu=cortex-a8
+ $(AM_CFLAGS_BASE) @VGCONF_PLATFORM_ARM_ARCH@
AM_CCASFLAGS_ARM_LINUX = $(AM_CPPFLAGS_ARM_LINUX) @FLAG_M32@ \
- -marm -mcpu=cortex-a8 -g
+ @VGCONF_PLATFORM_ARM_ARCH@ -g
AM_FLAG_M3264_X86_DARWIN = -arch i386
AM_CFLAGS_X86_DARWIN = $(WERROR) -arch i386 $(AM_CFLAGS_BASE) \
@@ -500,15 +459,15 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+ cd $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -524,10 +483,9 @@ $(top_builddir)/config.status: $(top_src
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
+ cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
@if test ! -f $@; then \
@@ -539,7 +497,7 @@ stamp-h1: $(srcdir)/config.h.in $(top_bu
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ cd $(top_srcdir) && $(AUTOHEADER)
rm -f stamp-h1
touch $@
@@ -556,63 +514,54 @@ drd/scripts/download-and-build-splash2:
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
- @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
- for p in $$list; do \
+ @list='$(pkgconfig_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+ f=$(am__strip_dir) \
+ echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+ $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
- @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- test -n "$$files" || exit 0; \
- echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
+ @list='$(pkgconfig_DATA)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+ done
install-pkglibDATA: $(pkglib_DATA)
@$(NORMAL_INSTALL)
test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)"
- @list='$(pkglib_DATA)'; test -n "$(pkglibdir)" || list=; \
- for p in $$list; do \
+ @list='$(pkglib_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkglibdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(pkglibdir)" || exit $$?; \
+ f=$(am__strip_dir) \
+ echo " $(pkglibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \
+ $(pkglibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \
done
uninstall-pkglibDATA:
@$(NORMAL_UNINSTALL)
- @list='$(pkglib_DATA)'; test -n "$(pkglibdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- test -n "$$files" || exit 0; \
- echo " ( cd '$(DESTDIR)$(pkglibdir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(pkglibdir)" && rm -f $$files
+ @list='$(pkglib_DATA)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \
+ done
install-pkgincludeHEADERS: $(pkginclude_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)"
- @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
- for p in $$list; do \
+ @list='$(pkginclude_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
- $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
+ f=$(am__strip_dir) \
+ echo " $(pkgincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+ $(pkgincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgincludedir)/$$f"; \
done
uninstall-pkgincludeHEADERS:
@$(NORMAL_UNINSTALL)
- @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- test -n "$$files" || exit 0; \
- echo " ( cd '$(DESTDIR)$(pkgincludedir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(pkgincludedir)" && rm -f $$files
+ @list='$(pkginclude_HEADERS)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pkgincludedir)/$$f"; \
+ done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
@@ -638,7 +587,7 @@ $(RECURSIVE_TARGETS):
else \
local_target="$$target"; \
fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
@@ -672,16 +621,16 @@ $(RECURSIVE_CLEAN_TARGETS):
else \
local_target="$$target"; \
fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -696,7 +645,7 @@ tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
- set x; \
+ tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
@@ -708,7 +657,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCE
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
@@ -717,41 +666,36 @@ TAGS: tags-recursive $(HEADERS) $(SOURCE
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
+ tags=; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
+ $$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
+ test -d $(distdir) || mkdir $(distdir)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -767,55 +711,39 @@ distdir: $(DISTFILES)
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
- am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -755 \
+ -find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
+ || chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
@@ -827,10 +755,6 @@ dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
-
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
@@ -855,29 +779,25 @@ dist dist-all: distdir
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
+ chmod -R a-w $(distdir); chmod u+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
+ && cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
@@ -899,15 +819,13 @@ distcheck: dist
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
- @$(am__cd) '$(distuninstallcheck_dir)' \
+ @cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
@@ -955,7 +873,6 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -1031,15 +948,14 @@ ps-am:
uninstall-am: uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS \
uninstall-pkglibDATA
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
- ctags-recursive install install-am install-strip \
- tags-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-strip
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am all-local am--refresh check check-am clean \
clean-generic clean-local ctags ctags-recursive dist dist-all \
- dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \
- dist-zip distcheck distclean distclean-generic distclean-hdr \
+ dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-zip \
+ distcheck distclean distclean-generic distclean-hdr \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-dvi install-dvi-am \
@@ -1146,7 +1062,6 @@ all-local: default.supp
clean-local:
rm -rf $(inplacedir)
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: