/* $NetBSD: dd.c,v 1.37 2004/01/17 21:00:16 dbj Exp $ */ /*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Keith Muller of the University of California, San Diego and Lance * Visser of Convex Computer Corporation. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #ifndef lint __COPYRIGHT("@(#) Copyright (c) 1991, 1993, 1994\n\ The Regents of the University of California. All rights reserved.\n"); #endif /* not lint */ #ifndef lint #if 0 static char sccsid[] = "@(#)dd.c 8.5 (Berkeley) 4/2/94"; #else __RCSID("$NetBSD: dd.c,v 1.37 2004/01/17 21:00:16 dbj Exp $"); #endif #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "dd.h" //#define NO_CONV //#include "extern.h" void block(void); void block_close(void); void dd_out(int); void def(void); void def_close(void); void jcl(char **); void pos_in(void); void pos_out(void); void summary(void); void summaryx(int); void terminate(int); void unblock(void); void unblock_close(void); ssize_t bwrite(int, const void *, size_t); extern IO in, out; extern STAT st; extern void (*cfunc)(void); extern uint64_t cpy_cnt; extern uint64_t cbsz; extern u_int ddflags; extern u_int files_cnt; extern int progress; extern const u_char *ctab; #ifndef MIN #define MIN(a, b) ((a) < (b) ? (a) : (b)) #endif #ifndef MAX #define MAX(a, b) ((a) > (b) ? (a) : (b)) #endif #ifndef DEFFILEMODE #define DEFFILEMODE (S_IRUSR | S_IWUSR) #endif static void dd_close(void); static void dd_in(void); static void getfdtype(IO *); static int redup_clean_fd(int); static void setup(void); IO in, out; /* input/output state */ STAT st; /* statistics */ void (*cfunc)(void); /* conversion function */ uint64_t cpy_cnt; /* # of blocks to copy */ static off_t pending = 0; /* pending seek if sparse */ u_int ddflags; /* conversion options */ uint64_t cbsz; /* conversion block size */ u_int files_cnt = 1; /* # of files to copy */ int progress = 0; /* display sign of life */ const u_char *ctab; /* conversion table */ sigset_t infoset; /* a set blocking SIGINFO */ int main(int argc, char *argv[]) { int ch; while ((ch = getopt(argc, argv, "")) != -1) { switch (ch) { default: fprintf(stderr, "usage: dd [operand ...]\n"); exit(1); /* NOTREACHED */ } } argc -= (optind - 1); argv += (optind - 1); jcl(argv); setup(); // (void)signal(SIGINFO, summaryx); (void)signal(SIGINT, terminate); (void)sigemptyset(&infoset); // (void)sigaddset(&infoset, SIGINFO); (void)atexit(summary); while (files_cnt--) dd_in(); dd_close(); exit(0); /* NOTREACHED */ } static void setup(void) { if (in.name == NULL) { in.name = "stdin"; in.fd = STDIN_FILENO; } else { in.fd = open(in.name, O_RDONLY, 0); if (in.fd < 0) { fprintf(stderr, "%s: cannot open for read: %s\n", in.name, strerror(errno)); exit(1); /* NOTREACHED */ } /* Ensure in.fd is outside the stdio descriptor range */ in.fd = redup_clean_fd(in.fd); } getfdtype(&in); if (files_cnt > 1 && !(in.flags & ISTAPE)) { fprintf(stderr, "files is not supported for non-tape devices\n"); exit(1); /* NOTREACHED */ } if (out.name == NULL) { /* No way to check for read access here. */ out.fd = STDOUT_FILENO; out.name = "stdout"; } else { #define OFLAGS \ (O_CREAT | (ddflags & (C_SEEK | C_NOTRUNC) ? 0 : O_TRUNC)) out.fd = open(out.name, O_RDWR | OFLAGS, DEFFILEMODE); /* * May not have read access, so try again with write only. * Without read we may have a problem if output also does * not support seeks. */ if (out.fd < 0) { out.fd = open(out.name, O_WRONLY | OFLAGS, DEFFILEMODE); out.flags |= NOREAD; } if (out.fd < 0) { fprintf(stderr, "%s: cannot open for write: %s\n", out.name, strerror(errno)); exit(1); /* NOTREACHED */ } /* Ensure out.fd is outside the stdio descriptor range */ out.fd = redup_clean_fd(out.fd); } getfdtype(&out); /* * Allocate space for the input and output buffers. If not doing * record oriented I/O, only need a single buffer. */ if (!(ddflags & (C_BLOCK|C_UNBLOCK))) { if ((in.db = malloc(out.dbsz + in.dbsz - 1)) == NULL) { exit(1); /* NOTREACHED */ } out.db = in.db; } else if ((in.db = malloc((u_int)(MAX(in.dbsz, cbsz) + cbsz))) == NULL || (out.db = malloc((u_int)(out.dbsz + cbsz))) == NULL) { exit(1); /* NOTREACHED */ } in.dbp = in.db; out.dbp = out.db; /* Position the input/output streams. */ if (in.offset) pos_in(); if (out.offset) pos_out(); /* * Truncate the output file; ignore errors because it fails on some * kinds of output files, tapes, for example. */ if ((ddflags & (C_OF | C_SEEK | C_NOTRUNC)) == (C_OF | C_SEEK)) (void)ftruncate(out.fd, (off_t)out.offset * out.dbsz); (void)gettimeofday(&st.start, NULL); /* Statistics timestamp. */ } static void getfdtype(IO *io) { // struct mtget mt; struct stat sb; if (fstat(io->fd, &sb)) { fprintf(stderr, "%s: cannot fstat: %s\n", io->name, strerror(errno)); exit(1); /* NOTREACHED */ } if (S_ISCHR(sb.st_mode)) io->flags |= /*ioctl(io->fd, MTIOCGET, &mt) ? ISCHR : ISTAPE; */ ISCHR; else if (lseek(io->fd, (off_t)0, SEEK_CUR) == -1 && errno == ESPIPE) io->flags |= ISPIPE; /* XXX fixed in 4.4BSD */ } /* * Move the parameter file descriptor to a descriptor that is outside the * stdio descriptor range, if necessary. This is required to avoid * accidentally outputting completion or error messages into the * output file that were intended for the tty. */ static int redup_clean_fd(int fd) { int newfd; if (fd != STDIN_FILENO && fd != STDOUT_FILENO && fd != STDERR_FILENO) /* File descriptor is ok, return immediately. */ return fd; /* * 3 is the first descriptor greater than STD*_FILENO. Any * free descriptor valued 3 or above is acceptable... */ newfd = fcntl(fd, F_DUPFD, 3); if (newfd < 0) { fprintf(stderr, "dupfd IO: %s\n", strerror(errno)); exit(1); /* NOTREACHED */ } close(fd); return newfd; } static void dd_in(void) { int flags; int64_t n; for (flags = ddflags;;) { if (cpy_cnt && (st.in_full + st.in_part) >= cpy_cnt) return; /* * Clear the buffer first if doing "sync" on input. * If doing block operations use spaces. This will * affect not only the C_NOERROR case, but also the * last partial input block which should be padded * with zero and not garbage. */ if (flags & C_SYNC) { if (flags & (C_BLOCK|C_UNBLOCK)) (void)memset(in.dbp, ' ', in.dbsz); else (void)memset(in.dbp, 0, in.dbsz); } n = read(in.fd, in.dbp, in.dbsz); if (n == 0) { in.dbrcnt = 0; return; } /* Read error. */ if (n < 0) { /* * If noerror not specified, die. POSIX requires that * the warning message be followed by an I/O display. */ fprintf(stderr, "%s: read error: %s\n", in.name, strerror(errno)); if (!(flags & C_NOERROR)) { exit(1); /* NOTREACHED */ } summary(); /* * If it's not a tape drive or a pipe, seek past the * error. If your OS doesn't do the right thing for * raw disks this section should be modified to re-read * in sector size chunks. */ if (!(in.flags & (ISPIPE|ISTAPE)) && lseek(in.fd, (off_t)in.dbsz, SEEK_CUR)) fprintf(stderr, "%s: seek error: %s\n", in.name, strerror(errno)); /* If sync not specified, omit block and continue. */ if (!(ddflags & C_SYNC)) continue; /* Read errors count as full blocks. */ in.dbcnt += in.dbrcnt = in.dbsz; ++st.in_full; /* Handle full input blocks. */ } else if (n == in.dbsz) { in.dbcnt += in.dbrcnt = n; ++st.in_full; /* Handle partial input blocks. */ } else { /* If sync, use the entire block. */ if (ddflags & C_SYNC) in.dbcnt += in.dbrcnt = in.dbsz; else in.dbcnt += in.dbrcnt = n; ++st.in_part; } /* * POSIX states that if bs is set and no other conversions * than noerror, notrunc or sync are specified, the block * is output without buffering as it is read. */ if (ddflags & C_BS) { out.dbcnt = in.dbcnt; dd_out(1); in.dbcnt = 0; continue; } /* if (ddflags & C_SWAB) { if ((n = in.dbrcnt) & 1) { ++st.swab; --n; } swab(in.dbp, in.dbp, n); } */ in.dbp += in.dbrcnt; (*cfunc)(); } } /* * Cleanup any remaining I/O and flush output. If necesssary, output file * is truncated. */ static void dd_close(void) { if (cfunc == def) def_close(); else if (cfunc == block) block_close(); else if (cfunc == unblock) unblock_close(); if (ddflags & C_OSYNC && out.dbcnt < out.dbsz) { (void)memset(out.dbp, 0, out.dbsz - out.dbcnt); out.dbcnt = out.dbsz; } /* If there are pending sparse blocks, make sure * to write out the final block un-sparse */ if ((out.dbcnt == 0) && pending) { memset(out.db, 0, out.dbsz); out.dbcnt = out.dbsz; out.dbp = out.db + out.dbcnt; pending -= out.dbsz; } if (out.dbcnt) dd_out(1); /* * Reporting nfs write error may be defered until next * write(2) or close(2) system call. So, we need to do an * extra check. If an output is stdout, the file structure * may be shared among with other processes and close(2) just * decreases the reference count. */ if (out.fd == STDOUT_FILENO && fsync(out.fd) == -1 && errno != EINVAL) { fprintf(stderr, "fsync stdout: %s\n", strerror(errno)); exit(1); /* NOTREACHED */ } if (close(out.fd) == -1) { fprintf(stderr, "close: %s\n", strerror(errno)); exit(1); /* NOTREACHED */ } } void dd_out(int force) { static int warned; int64_t cnt, n, nw; u_char *outp; /* * Write one or more blocks out. The common case is writing a full * output block in a single write; increment the full block stats. * Otherwise, we're into partial block writes. If a partial write, * and it's a character device, just warn. If a tape device, quit. * * The partial writes represent two cases. 1: Where the input block * was less than expected so the output block was less than expected. * 2: Where the input block was the right size but we were forced to * write the block in multiple chunks. The original versions of dd(1) * never wrote a block in more than a single write, so the latter case * never happened. * * One special case is if we're forced to do the write -- in that case * we play games with the buffer size, and it's usually a partial write. */ outp = out.db; for (n = force ? out.dbcnt : out.dbsz;; n = out.dbsz) { for (cnt = n;; cnt -= nw) { if (!force && ddflags & C_SPARSE) { int sparse, i; sparse = 1; /* Is buffer sparse? */ for (i = 0; i < cnt; i++) if (outp[i] != 0) { sparse = 0; break; } if (sparse) { pending += cnt; outp += cnt; nw = 0; break; } } if (pending != 0) { if (lseek(out.fd, pending, SEEK_CUR) == -1) { fprintf(stderr, "%s: seek error creating " "sparse file: %s\n", out.name, strerror(errno)); exit(1); } } nw = bwrite(out.fd, outp, cnt); if (nw <= 0) { if (nw == 0) { fprintf(stderr, "%s: end of device\n", out.name); exit(1); /* NOTREACHED */ } if (errno != EINTR) { fprintf(stderr, "%s: write error: %s\n", out.name, strerror(errno)); /* NOTREACHED */ exit(1); } nw = 0; } if (pending) { st.bytes += pending; st.sparse += pending/out.dbsz; st.out_full += pending/out.dbsz; pending = 0; } outp += nw; st.bytes += nw; if (nw == n) { if (n != out.dbsz) ++st.out_part; else ++st.out_full; break; } ++st.out_part; if (nw == cnt) break; if (out.flags & ISCHR && !warned) { warned = 1; fprintf(stderr, "%s: short write on character " "device\n", out.name); } if (out.flags & ISTAPE) { fprintf(stderr, "%s: short write on tape device", out.name); exit(1); /* NOTREACHED */ } } if ((out.dbcnt -= n) < out.dbsz) break; } /* Reassemble the output block. */ if (out.dbcnt) (void)memmove(out.db, out.dbp - out.dbcnt, out.dbcnt); out.dbp = out.db + out.dbcnt; if (progress) (void)write(STDERR_FILENO, ".", 1); } /* * A protected against SIGINFO write */ ssize_t bwrite(int fd, const void *buf, size_t len) { sigset_t oset; ssize_t rv; int oerrno; (void)sigprocmask(SIG_BLOCK, &infoset, &oset); rv = write(fd, buf, len); oerrno = errno; (void)sigprocmask(SIG_SETMASK, &oset, NULL); errno = oerrno; return (rv); } /* * Position input/output data streams before starting the copy. Device type * dependent. Seekable devices use lseek, and the rest position by reading. * Seeking past the end of file can cause null blocks to be written to the * output. */ void pos_in(void) { int bcnt, cnt, nr, warned; /* If not a pipe or tape device, try to seek on it. */ if (!(in.flags & (ISPIPE|ISTAPE))) { if (lseek64(in.fd, (off64_t)in.offset * (off64_t)in.dbsz, SEEK_CUR) == -1) { fprintf(stderr, "%s: seek error: %s", in.name, strerror(errno)); exit(1); /* NOTREACHED */ } return; /* NOTREACHED */ } /* * Read the data. If a pipe, read until satisfy the number of bytes * being skipped. No differentiation for reading complete and partial * blocks for other devices. */ for (bcnt = in.dbsz, cnt = in.offset, warned = 0; cnt;) { if ((nr = read(in.fd, in.db, bcnt)) > 0) { if (in.flags & ISPIPE) { if (!(bcnt -= nr)) { bcnt = in.dbsz; --cnt; } } else --cnt; continue; } if (nr == 0) { if (files_cnt > 1) { --files_cnt; continue; } fprintf(stderr, "skip reached end of input\n"); exit(1); /* NOTREACHED */ } /* * Input error -- either EOF with no more files, or I/O error. * If noerror not set die. POSIX requires that the warning * message be followed by an I/O display. */ if (ddflags & C_NOERROR) { if (!warned) { fprintf(stderr, "%s: error occurred\n", in.name); warned = 1; summary(); } continue; } fprintf(stderr, "%s: read error: %s", in.name, strerror(errno)); exit(1); /* NOTREACHED */ } } void pos_out(void) { // struct mtop t_op; int cnt, n; /* * If not a tape, try seeking on the file. Seeking on a pipe is * going to fail, but don't protect the user -- they shouldn't * have specified the seek operand. */ if (!(out.flags & ISTAPE)) { if (lseek64(out.fd, (off64_t)out.offset * (off64_t)out.dbsz, SEEK_SET) == -1) { fprintf(stderr, "%s: seek error: %s\n", out.name, strerror(errno)); exit(1); /* NOTREACHED */ } return; } /* If no read access, try using mtio. */ if (out.flags & NOREAD) { /* t_op.mt_op = MTFSR; t_op.mt_count = out.offset; if (ioctl(out.fd, MTIOCTOP, &t_op) < 0)*/ fprintf(stderr, "%s: cannot read", out.name); exit(1); /* NOTREACHED */ return; } /* Read it. */ for (cnt = 0; cnt < out.offset; ++cnt) { if ((n = read(out.fd, out.db, out.dbsz)) > 0) continue; if (n < 0) { fprintf(stderr, "%s: cannot position by reading: %s\n", out.name, strerror(errno)); exit(1); /* NOTREACHED */ } /* * If reach EOF, fill with NUL characters; first, back up over * the EOF mark. Note, cnt has not yet been incremented, so * the EOF read does not count as a seek'd block. */ /* t_op.mt_op = MTBSR; t_op.mt_count = 1; if (ioctl(out.fd, MTIOCTOP, &t_op) == -1) */ { fprintf(stderr, "%s: cannot position\n", out.name); exit(1); /* NOTREACHED */ } while (cnt++ < out.offset) if ((n = bwrite(out.fd, out.db, out.dbsz)) != out.dbsz) { fprintf(stderr, "%s: cannot position " "by writing: %s\n", out.name, strerror(errno)); exit(1); /* NOTREACHED */ } break; } } /* * def -- * Copy input to output. Input is buffered until reaches obs, and then * output until less than obs remains. Only a single buffer is used. * Worst case buffer calculation is (ibs + obs - 1). */ void def(void) { uint64_t cnt; u_char *inp; const u_char *t; if ((t = ctab) != NULL) for (inp = in.dbp - (cnt = in.dbrcnt); cnt--; ++inp) *inp = t[*inp]; /* Make the output buffer look right. */ out.dbp = in.dbp; out.dbcnt = in.dbcnt; if (in.dbcnt >= out.dbsz) { /* If the output buffer is full, write it. */ dd_out(0); /* * Ddout copies the leftover output to the beginning of * the buffer and resets the output buffer. Reset the * input buffer to match it. */ in.dbp = out.dbp; in.dbcnt = out.dbcnt; } } void def_close(void) { if (ddflags & C_FDATASYNC) { fdatasync(out.fd); } /* Just update the count, everything is already in the buffer. */ if (in.dbcnt) out.dbcnt = in.dbcnt; } #ifdef NO_CONV /* Build a smaller version (i.e. for a miniroot) */ /* These can not be called, but just in case... */ static const char no_block[] = "unblock and -DNO_CONV?\n"; void block(void) { fprintf(stderr, "%s", no_block + 2); exit(1); } void block_close(void) { fprintf(stderr, "%s", no_block + 2); exit(1); } void unblock(void) { fprintf(stderr, "%s", no_block); exit(1); } void unblock_close(void) { fprintf(stderr, "%s", no_block); exit(1); } #else /* NO_CONV */ /* * Copy variable length newline terminated records with a max size cbsz * bytes to output. Records less than cbs are padded with spaces. * * max in buffer: MAX(ibs, cbsz) * max out buffer: obs + cbsz */ void block(void) { static int intrunc; int ch = 0; /* pacify gcc */ uint64_t cnt, maxlen; u_char *inp, *outp; const u_char *t; /* * Record truncation can cross block boundaries. If currently in a * truncation state, keep tossing characters until reach a newline. * Start at the beginning of the buffer, as the input buffer is always * left empty. */ if (intrunc) { for (inp = in.db, cnt = in.dbrcnt; cnt && *inp++ != '\n'; --cnt); if (!cnt) { in.dbcnt = 0; in.dbp = in.db; return; } intrunc = 0; /* Adjust the input buffer numbers. */ in.dbcnt = cnt - 1; in.dbp = inp + cnt - 1; } /* * Copy records (max cbsz size chunks) into the output buffer. The * translation is done as we copy into the output buffer. */ for (inp = in.dbp - in.dbcnt, outp = out.dbp; in.dbcnt;) { maxlen = MIN(cbsz, in.dbcnt); if ((t = ctab) != NULL) for (cnt = 0; cnt < maxlen && (ch = *inp++) != '\n'; ++cnt) *outp++ = t[ch]; else for (cnt = 0; cnt < maxlen && (ch = *inp++) != '\n'; ++cnt) *outp++ = ch; /* * Check for short record without a newline. Reassemble the * input block. */ if (ch != '\n' && in.dbcnt < cbsz) { (void)memmove(in.db, in.dbp - in.dbcnt, in.dbcnt); break; } /* Adjust the input buffer numbers. */ in.dbcnt -= cnt; if (ch == '\n') --in.dbcnt; /* Pad short records with spaces. */ if (cnt < cbsz) (void)memset(outp, ctab ? ctab[' '] : ' ', cbsz - cnt); else { /* * If the next character wouldn't have ended the * block, it's a truncation. */ if (!in.dbcnt || *inp != '\n') ++st.trunc; /* Toss characters to a newline. */ for (; in.dbcnt && *inp++ != '\n'; --in.dbcnt); if (!in.dbcnt) intrunc = 1; else --in.dbcnt; } /* Adjust output buffer numbers. */ out.dbp += cbsz; if ((out.dbcnt += cbsz) >= out.dbsz) dd_out(0); outp = out.dbp; } in.dbp = in.db + in.dbcnt; } void block_close(void) { /* * Copy any remaining data into the output buffer and pad to a record. * Don't worry about truncation or translation, the input buffer is * always empty when truncating, and no characters have been added for * translation. The bottom line is that anything left in the input * buffer is a truncated record. Anything left in the output buffer * just wasn't big enough. */ if (in.dbcnt) { ++st.trunc; (void)memmove(out.dbp, in.dbp - in.dbcnt, in.dbcnt); (void)memset(out.dbp + in.dbcnt, ctab ? ctab[' '] : ' ', cbsz - in.dbcnt); out.dbcnt += cbsz; } } /* * Convert fixed length (cbsz) records to variable length. Deletes any * trailing blanks and appends a newline. * * max in buffer: MAX(ibs, cbsz) + cbsz * max out buffer: obs + cbsz */ void unblock(void) { uint64_t cnt; u_char *inp; const u_char *t; /* Translation and case conversion. */ if ((t = ctab) != NULL) for (cnt = in.dbrcnt, inp = in.dbp - 1; cnt--; inp--) *inp = t[*inp]; /* * Copy records (max cbsz size chunks) into the output buffer. The * translation has to already be done or we might not recognize the * spaces. */ for (inp = in.db; in.dbcnt >= cbsz; inp += cbsz, in.dbcnt -= cbsz) { for (t = inp + cbsz - 1; t >= inp && *t == ' '; --t); if (t >= inp) { cnt = t - inp + 1; (void)memmove(out.dbp, inp, cnt); out.dbp += cnt; out.dbcnt += cnt; } ++out.dbcnt; *out.dbp++ = '\n'; if (out.dbcnt >= out.dbsz) dd_out(0); } if (in.dbcnt) (void)memmove(in.db, in.dbp - in.dbcnt, in.dbcnt); in.dbp = in.db + in.dbcnt; } void unblock_close(void) { uint64_t cnt; u_char *t; if (in.dbcnt) { warnx("%s: short input record", in.name); for (t = in.db + in.dbcnt - 1; t >= in.db && *t == ' '; --t); if (t >= in.db) { cnt = t - in.db + 1; (void)memmove(out.dbp, in.db, cnt); out.dbp += cnt; out.dbcnt += cnt; } ++out.dbcnt; *out.dbp++ = '\n'; } } #endif /* NO_CONV */ #define tv2mS(tv) ((tv).tv_sec * 1000LL + ((tv).tv_usec + 500) / 1000) void summary(void) { char buf[100]; int64_t mS; struct timeval tv; if (progress) (void)write(STDERR_FILENO, "\n", 1); (void)gettimeofday(&tv, NULL); mS = tv2mS(tv) - tv2mS(st.start); if (mS == 0) mS = 1; /* Use snprintf(3) so that we don't reenter stdio(3). */ (void)snprintf(buf, sizeof(buf), "%llu+%llu records in\n%llu+%llu records out\n", (unsigned long long)st.in_full, (unsigned long long)st.in_part, (unsigned long long)st.out_full, (unsigned long long)st.out_part); (void)write(STDERR_FILENO, buf, strlen(buf)); if (st.swab) { (void)snprintf(buf, sizeof(buf), "%llu odd length swab %s\n", (unsigned long long)st.swab, (st.swab == 1) ? "block" : "blocks"); (void)write(STDERR_FILENO, buf, strlen(buf)); } if (st.trunc) { (void)snprintf(buf, sizeof(buf), "%llu truncated %s\n", (unsigned long long)st.trunc, (st.trunc == 1) ? "block" : "blocks"); (void)write(STDERR_FILENO, buf, strlen(buf)); } if (st.sparse) { (void)snprintf(buf, sizeof(buf), "%llu sparse output %s\n", (unsigned long long)st.sparse, (st.sparse == 1) ? "block" : "blocks"); (void)write(STDERR_FILENO, buf, strlen(buf)); } (void)snprintf(buf, sizeof(buf), "%llu bytes transferred in %lu.%03d secs (%llu bytes/sec)\n", (unsigned long long) st.bytes, (long) (mS / 1000), (int) (mS % 1000), (unsigned long long) (st.bytes * 1000LL / mS)); (void)write(STDERR_FILENO, buf, strlen(buf)); } void terminate(int notused) { exit(0); /* NOTREACHED */ } static int c_arg(const void *, const void *); #ifndef NO_CONV static int c_conv(const void *, const void *); #endif static void f_bs(char *); static void f_cbs(char *); static void f_conv(char *); static void f_count(char *); static void f_files(char *); static void f_ibs(char *); static void f_if(char *); static void f_obs(char *); static void f_of(char *); static void f_seek(char *); static void f_skip(char *); static void f_progress(char *); static const struct arg { const char *name; void (*f)(char *); u_int set, noset; } args[] = { /* the array needs to be sorted by the first column so bsearch() can be used to find commands quickly */ { "bs", f_bs, C_BS, C_BS|C_IBS|C_OBS|C_OSYNC }, { "cbs", f_cbs, C_CBS, C_CBS }, { "conv", f_conv, 0, 0 }, { "count", f_count, C_COUNT, C_COUNT }, { "files", f_files, C_FILES, C_FILES }, { "ibs", f_ibs, C_IBS, C_BS|C_IBS }, { "if", f_if, C_IF, C_IF }, { "obs", f_obs, C_OBS, C_BS|C_OBS }, { "of", f_of, C_OF, C_OF }, { "progress", f_progress, 0, 0 }, { "seek", f_seek, C_SEEK, C_SEEK }, { "skip", f_skip, C_SKIP, C_SKIP }, }; /* * args -- parse JCL syntax of dd. */ void jcl(char **argv) { struct arg *ap, tmp; char *oper, *arg; in.dbsz = out.dbsz = 512; while ((oper = *++argv) != NULL) { if ((arg = strchr(oper, '=')) == NULL) { fprintf(stderr, "unknown operand %s\n", oper); exit(1); /* NOTREACHED */ } *arg++ = '\0'; if (!*arg) { fprintf(stderr, "no value specified for %s\n", oper); exit(1); /* NOTREACHED */ } tmp.name = oper; if (!(ap = (struct arg *)bsearch(&tmp, args, sizeof(args)/sizeof(struct arg), sizeof(struct arg), c_arg))) { fprintf(stderr, "unknown operand %s\n", tmp.name); exit(1); /* NOTREACHED */ } if (ddflags & ap->noset) { fprintf(stderr, "%s: illegal argument combination or already set\n", tmp.name); exit(1); /* NOTREACHED */ } ddflags |= ap->set; ap->f(arg); } /* Final sanity checks. */ if (ddflags & C_BS) { /* * Bs is turned off by any conversion -- we assume the user * just wanted to set both the input and output block sizes * and didn't want the bs semantics, so we don't warn. */ if (ddflags & (C_BLOCK | C_LCASE | C_SWAB | C_UCASE | C_UNBLOCK | C_OSYNC | C_ASCII | C_EBCDIC | C_SPARSE)) { ddflags &= ~C_BS; ddflags |= C_IBS|C_OBS; } /* Bs supersedes ibs and obs. */ if (ddflags & C_BS && ddflags & (C_IBS|C_OBS)) fprintf(stderr, "bs supersedes ibs and obs\n"); } /* * Ascii/ebcdic and cbs implies block/unblock. * Block/unblock requires cbs and vice-versa. */ if (ddflags & (C_BLOCK|C_UNBLOCK)) { if (!(ddflags & C_CBS)) { fprintf(stderr, "record operations require cbs\n"); exit(1); /* NOTREACHED */ } cfunc = ddflags & C_BLOCK ? block : unblock; } else if (ddflags & C_CBS) { if (ddflags & (C_ASCII|C_EBCDIC)) { if (ddflags & C_ASCII) { ddflags |= C_UNBLOCK; cfunc = unblock; } else { ddflags |= C_BLOCK; cfunc = block; } } else { fprintf(stderr, "cbs meaningless if not doing record operations\n"); exit(1); /* NOTREACHED */ } } else cfunc = def; /* Read, write and seek calls take off_t as arguments. * * The following check is not done because an off_t is a quad * for current NetBSD implementations. * * if (in.offset > INT_MAX/in.dbsz || out.offset > INT_MAX/out.dbsz) * errx(1, "seek offsets cannot be larger than %d", INT_MAX); */ } static int c_arg(const void *a, const void *b) { return (strcmp(((const struct arg *)a)->name, ((const struct arg *)b)->name)); } static long long strsuftoll(const char* name, const char* arg, int def, unsigned long long max) { long long result; if (sscanf(arg, "%lld", &result) == 0) result = def; return result; } static void f_bs(char *arg) { in.dbsz = out.dbsz = strsuftoll("block size", arg, 1, UINT_MAX); } static void f_cbs(char *arg) { cbsz = strsuftoll("conversion record size", arg, 1, UINT_MAX); } static void f_count(char *arg) { cpy_cnt = strsuftoll("block count", arg, 0, LLONG_MAX); if (!cpy_cnt) terminate(0); } static void f_files(char *arg) { files_cnt = (u_int)strsuftoll("file count", arg, 0, UINT_MAX); if (!files_cnt) terminate(0); } static void f_ibs(char *arg) { if (!(ddflags & C_BS)) in.dbsz = strsuftoll("input block size", arg, 1, UINT_MAX); } static void f_if(char *arg) { in.name = arg; } static void f_obs(char *arg) { if (!(ddflags & C_BS)) out.dbsz = strsuftoll("output block size", arg, 1, UINT_MAX); } static void f_of(char *arg) { out.name = arg; } static void f_seek(char *arg) { out.offset = strsuftoll("seek blocks", arg, 0, LLONG_MAX); } static void f_skip(char *arg) { in.offset = strsuftoll("skip blocks", arg, 0, LLONG_MAX); } static void f_progress(char *arg) { if (*arg != '0') progress = 1; } #ifdef NO_CONV /* Build a small version (i.e. for a ramdisk root) */ static void f_conv(char *arg) { fprintf(stderr, "conv option disabled\n"); exit(1); /* NOTREACHED */ } #else /* NO_CONV */ static const struct conv { const char *name; u_int set, noset; const u_char *ctab; } clist[] = { { "block", C_BLOCK, C_UNBLOCK, NULL }, { "fdatasync", C_FDATASYNC, 0, NULL }, { "noerror", C_NOERROR, 0, NULL }, { "notrunc", C_NOTRUNC, 0, NULL }, { "osync", C_OSYNC, C_BS, NULL }, { "sparse", C_SPARSE, 0, NULL }, { "swab", C_SWAB, 0, NULL }, { "sync", C_SYNC, 0, NULL }, { "unblock", C_UNBLOCK, C_BLOCK, NULL }, /* If you add items to this table, be sure to add the * conversions to the C_BS check in the jcl routine above. */ }; static void f_conv(char *arg) { struct conv *cp, tmp; while (arg != NULL) { tmp.name = strsep(&arg, ","); if (!(cp = (struct conv *)bsearch(&tmp, clist, sizeof(clist)/sizeof(struct conv), sizeof(struct conv), c_conv))) { errx(EXIT_FAILURE, "unknown conversion %s", tmp.name); /* NOTREACHED */ } if (ddflags & cp->noset) { errx(EXIT_FAILURE, "%s: illegal conversion combination", tmp.name); /* NOTREACHED */ } ddflags |= cp->set; if (cp->ctab) ctab = cp->ctab; } } static int c_conv(const void *a, const void *b) { return (strcmp(((const struct conv *)a)->name, ((const struct conv *)b)->name)); } #endif /* NO_CONV */