# Example hostapd build time configuration
#
# This file lists the configuration options that are used when building the
# hostapd binary. All lines starting with # are ignored. Configuration option
# lines must be commented out complete, if they are not to be included, i.e.,
# just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cass, these lines should use += in order not
# to override previous values of the variables.

# Driver interface for drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y

# Driver interface for Host AP driver
#CONFIG_DRIVER_HOSTAP=y

# Driver interface for wired authenticator
#CONFIG_DRIVER_WIRED=y

# Driver interface for madwifi driver
#CONFIG_DRIVER_MADWIFI=y
#CFLAGS += -I../head # change to reflect local setup; directory for madwifi src

# Driver interface for Prism54 driver
#CONFIG_DRIVER_PRISM54=y

# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib

# IEEE 802.11F/IAPP
#CONFIG_IAPP=y

# WPA2/IEEE 802.11i RSN pre-authentication
# CONFIG_RSN_PREAUTH=y

# Integrated EAP authenticator
#CONFIG_EAP=y

# EAP-MD5 for the integrated EAP authenticator
#CONFIG_EAP_MD5=y

# EAP-TLS for the integrated EAP authenticator
#CONFIG_EAP_TLS=y

# EAP-MSCHAPv2 for the integrated EAP authenticator
#CONFIG_EAP_MSCHAPV2=y

# EAP-PEAP for the integrated EAP authenticator
#CONFIG_EAP_PEAP=y

# EAP-PSK for the integrated EAP authenticator
#CONFIG_EAP_PSK=y

# EAP-GTC for the integrated EAP authenticator
#CONFIG_EAP_GTC=y

# EAP-TTLS for the integrated EAP authenticator
#CONFIG_EAP_TTLS=y

# EAP-SIM for the integrated EAP authenticator
#CONFIG_EAP_SIM=y

# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
#CONFIG_PKCS12=y

# RADIUS authentication server. This provides access to the integrated EAP
# authenticator from external hosts using RADIUS.
#CONFIG_RADIUS_SERVER=y
#
# Remove debugging code that is printing out debug messages to stdout.
# This can be used to reduce the size of the hostapd considerably if debugging
# code is not needed.
#CONFIG_NO_STDOUT_DEBUG=y
# Remove support for RADIUS accounting
CONFIG_NO_ACCOUNTING=y

# Remove support for RADIUS
CONFIG_NO_RADIUS=y

# Remove support for VLANs
CONFIG_NO_VLAN=y

# Remove support for dumping state into a file on SIGUSR1 signal
# This can be used to reduce binary size at the cost of disabling a debugging
# option.
CONFIG_NO_DUMP_STATE=y