diff -Nur exmap-console-0.4.1.orig/INSTALL exmap-console-0.4.1/INSTALL --- exmap-console-0.4.1.orig/INSTALL 2006-11-03 09:36:03.000000000 +0100 +++ exmap-console-0.4.1/INSTALL 2011-01-11 12:44:16.000000000 +0100 @@ -1,16 +1,25 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free -Software Foundation, Inc. +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006, 2007, 2008, 2009 Free Software Foundation, Inc. -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== -These are generic installation instructions. + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -23,9 +32,9 @@ It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is +the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale -cache files.) +cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail @@ -35,30 +44,37 @@ may remove or edit it. The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. + `./configure' to configure the package for your system. - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,45 +83,69 @@ all sorts of other programs in order to regenerate files that came with the distribution. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + Compilers and Options ===================== -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== -You can compile the package for more than one kind of computer at the + You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the +own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. Installation Names ================== -By default, `make install' installs the package's commands under + By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -116,16 +156,47 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to + Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -137,14 +208,53 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -152,7 +262,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -170,9 +281,9 @@ Sharing Defaults ================ -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. @@ -181,7 +292,7 @@ Defining Variables ================== -Variables not defined in a site shell script can be set in the + Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set @@ -190,21 +301,29 @@ ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). Here is a another example: +overridden in the site shell script). - /bin/bash ./configure CONFIG_SHELL=/bin/bash +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: -Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent -configuration-related scripts to be executed by `/bin/bash'. + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== -`configure' recognizes the following options to control how it operates. + `configure' recognizes the following options to control how it +operates. `--help' `-h' - Print a summary of the options to `configure', and exit. + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. `--version' `-V' @@ -231,6 +350,16 @@ Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. diff -Nur exmap-console-0.4.1.orig/Makefile.am exmap-console-0.4.1/Makefile.am --- exmap-console-0.4.1.orig/Makefile.am 2006-11-06 18:05:01.000000000 +0100 +++ exmap-console-0.4.1/Makefile.am 2011-01-11 12:44:03.000000000 +0100 @@ -1,4 +1,4 @@ -SUBDIRS=kernel src doc +SUBDIRS=src DISTCLEANFILES = *~ Makefile.in install-sh missing depcomp *.m4 config.log config.status Makefile diff -Nur exmap-console-0.4.1.orig/Makefile.in exmap-console-0.4.1/Makefile.in --- exmap-console-0.4.1.orig/Makefile.in 2007-02-26 12:44:02.000000000 +0100 +++ exmap-console-0.4.1/Makefile.in 2011-01-11 12:44:16.000000000 +0100 @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,15 +14,12 @@ # PARTICULAR PURPOSE. @SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = . +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -42,17 +40,24 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno configure.status.lineno + configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ - install-exec-recursive install-info-recursive \ - install-recursive installcheck-recursive installdirs-recursive \ - pdf-recursive ps-recursive uninstall-info-recursive \ - uninstall-recursive + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) @@ -60,16 +65,39 @@ distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } + { test ! -d "$(distdir)" \ + || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr "$(distdir)"; }; } +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ @@ -82,8 +110,6 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DODOCS_FALSE = @DODOCS_FALSE@ -DODOCS_TRUE = @DODOCS_TRUE@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ @@ -91,38 +117,41 @@ GCC_CFLAGS = @GCC_CFLAGS@ GLIB_CFLAGS = @GLIB_CFLAGS@ GLIB_LIBS = @GLIB_LIBS@ -HAVE_HELPTOMAN_FALSE = @HAVE_HELPTOMAN_FALSE@ -HAVE_HELPTOMAN_TRUE = @HAVE_HELPTOMAN_TRUE@ HELPTOMAN = @HELPTOMAN@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTERACTIVE_FALSE = @INTERACTIVE_FALSE@ -INTERACTIVE_TRUE = @INTERACTIVE_TRUE@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ READLINE_CFLAGS = @READLINE_CFLAGS@ READLINE_LIBS = @READLINE_LIBS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -130,6 +159,7 @@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ +builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ @@ -153,9 +183,13 @@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ -SUBDIRS = kernel src doc +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +SUBDIRS = src DISTCLEANFILES = *~ Makefile.in install-sh missing depcomp *.m4 config.log config.status Makefile all: all-recursive @@ -166,15 +200,15 @@ @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ - cd $(srcdir) && $(AUTOMAKE) --gnu \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -190,10 +224,10 @@ $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) + $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -uninstall-info-am: + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. @@ -202,7 +236,7 @@ # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): - @failcom='exit 1'; \ + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -219,16 +253,15 @@ else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" -mostlyclean-recursive clean-recursive distclean-recursive \ -maintainer-clean-recursive: - @failcom='exit 1'; \ +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -254,16 +287,16 @@ else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) @@ -271,14 +304,14 @@ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ @@ -290,92 +323,114 @@ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) - mkdir $(distdir) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ - || $(mkdir_p) "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) @@ -384,6 +439,14 @@ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz + $(am__remove_distdir) + dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) @@ -407,13 +470,17 @@ distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac @@ -421,9 +488,11 @@ mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ @@ -445,13 +514,15 @@ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: - @cd $(distuninstallcheck_dir) \ + @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ @@ -493,6 +564,7 @@ distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @@ -510,18 +582,38 @@ html: html-recursive +html-am: + info: info-recursive info-am: install-data-am: +install-dvi: install-dvi-recursive + +install-dvi-am: + install-exec-am: +install-html: install-html-recursive + +install-html-am: + install-info: install-info-recursive +install-info-am: + install-man: +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-recursive @@ -542,29 +634,32 @@ ps-am: -uninstall-am: uninstall-info-am +uninstall-am: -uninstall-info: uninstall-info-recursive +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ + install-am install-strip tags-recursive -.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ - check-am clean clean-generic clean-recursive ctags \ - ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \ - dist-tarZ dist-zip distcheck distclean distclean-generic \ - distclean-recursive distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - maintainer-clean-recursive mostlyclean mostlyclean-generic \ - mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am uninstall-info-am +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ + dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \ + distclean distclean-generic distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags tags-recursive uninstall uninstall-am local-distclean: $(RM) -rf autom4te.cache distclean: distclean-recursive local-distclean + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -Nur exmap-console-0.4.1.orig/aclocal.m4 exmap-console-0.4.1/aclocal.m4 --- exmap-console-0.4.1.orig/aclocal.m4 2007-02-26 12:43:59.000000000 +0100 +++ exmap-console-0.4.1/aclocal.m4 2011-01-11 12:44:15.000000000 +0100 @@ -1,7 +1,7 @@ -# generated automatically by aclocal 1.9.6 -*- Autoconf -*- +# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005 Free Software Foundation, Inc. +# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -11,7 +11,16 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, +[m4_warning([this file was generated for autoconf 2.68. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# serial 1 (pkg-config-0.24) # # Copyright © 2004 Scott James Remnant . # @@ -39,7 +48,10 @@ AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) +AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) +AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) + if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi @@ -52,7 +64,6 @@ AC_MSG_RESULT([no]) PKG_CONFIG="" fi - fi[]dnl ])# PKG_PROG_PKG_CONFIG @@ -61,34 +72,31 @@ # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # -# -# Similar to PKG_CHECK_MODULES, make sure that the first instance of -# this or PKG_CHECK_MODULES is called, or make sure to call -# PKG_CHECK_EXISTS manually +# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +# only at the first occurence in configure.ac, so if the first place +# it's called might be skipped (such as if it is within an "if", you +# have to call PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_ifval([$2], [$2], [:]) + m4_default([$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) - # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], -[if test -n "$PKG_CONFIG"; then - if test -n "$$1"; then - pkg_cv_[]$1="$$1" - else - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], - [pkg_failed=yes]) - fi -else - pkg_failed=untried +[if test -n "$$1"; then + pkg_cv_[]$1="$$1" + elif test -n "$PKG_CONFIG"; then + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], + [pkg_failed=yes]) + else + pkg_failed=untried fi[]dnl ])# _PKG_CONFIG @@ -130,16 +138,17 @@ See the pkg-config man page for more details.]) if test $pkg_failed = yes; then + AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` else - $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - ifelse([$4], , [AC_MSG_ERROR(dnl + m4_default([$4], [AC_MSG_ERROR( [Package requirements ($2) were not met: $$1_PKG_ERRORS @@ -147,28 +156,28 @@ Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -_PKG_TEXT -])], - [$4]) +_PKG_TEXT])[]dnl + ]) elif test $pkg_failed = untried; then - ifelse([$4], , [AC_MSG_FAILURE(dnl + AC_MSG_RESULT([no]) + m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT -To get pkg-config, see .])], - [$4]) +To get pkg-config, see .])dnl + ]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) - ifelse([$3], , :, [$3]) + $3 fi[]dnl ])# PKG_CHECK_MODULES -# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -178,14 +187,31 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.9.6])]) +[AM_AUTOMAKE_VERSION([1.11.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- @@ -242,14 +268,14 @@ # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 7 +# serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- @@ -258,8 +284,11 @@ [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' @@ -273,15 +302,14 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 8 +# serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, @@ -309,6 +337,7 @@ ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) @@ -337,6 +366,16 @@ if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -354,7 +393,17 @@ done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -364,18 +413,23 @@ break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -426,61 +480,74 @@ AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -#serial 3 +#serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done done -done +} ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -499,14 +566,14 @@ # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 12 +# serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. @@ -523,16 +590,20 @@ # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.58])dnl +[AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi fi # test whether we have cygpath @@ -552,6 +623,9 @@ AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl @@ -567,8 +641,8 @@ AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. @@ -576,20 +650,37 @@ AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header @@ -600,18 +691,19 @@ # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. +_am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in - $1 | $1:* ) + $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done -echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -622,7 +714,14 @@ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. @@ -648,13 +747,13 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 4 # AM_MAKE_INCLUDE() # ----------------- @@ -663,7 +762,7 @@ [am_make=${MAKE-make} cat > confinc << 'END' am__doit: - @echo done + @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. @@ -673,24 +772,24 @@ _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) @@ -700,14 +799,14 @@ # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ @@ -723,7 +822,15 @@ # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " @@ -733,7 +840,7 @@ fi ]) -# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -741,70 +848,33 @@ # AM_PROG_MKDIR_P # --------------- -# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. -# -# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories -# created by `make install' are always world readable, even if the -# installer happens to have an overly restrictive umask (e.g. 077). -# This was a mistake. There are at least two reasons why we must not -# use `-m 0755': -# - it causes special bits like SGID to be ignored, -# - it may be too restrictive (some setups expect 775 directories). -# -# Do not use -m 0755 and let people choose whatever they expect by -# setting umask. -# -# We cannot accept any implementation of `mkdir' that recognizes `-p'. -# Some implementations (such as Solaris 8's) are not thread-safe: if a -# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' -# concurrently, both version can detect that a/ is missing, but only -# one can create it and the other will error out. Consequently we -# restrict ourselves to GNU make (using the --version option ensures -# this.) +# Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], -[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi -AC_SUBST([mkdir_p])]) +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- @@ -821,7 +891,7 @@ # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- @@ -831,14 +901,14 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 5 # AM_SANITY_CHECK # --------------- @@ -847,16 +917,29 @@ # Just in case sleep 1 echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` + set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ @@ -906,9 +989,28 @@ if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Copyright (C) 2006, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. diff -Nur exmap-console-0.4.1.orig/configure exmap-console-0.4.1/configure --- exmap-console-0.4.1.orig/configure 2007-02-26 12:44:00.000000000 +0100 +++ exmap-console-0.4.1/configure 2011-01-11 12:44:16.000000000 +0100 @@ -1,58 +1,85 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.60 for exmap-console 0.4.1. +# Generated by GNU Autoconf 2.68 for exmap-console 0.4.1. # # Report bugs to . # +# # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software +# Foundation, Inc. +# +# # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' else - PATH_SEPARATOR=: + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' fi - rm -f conf$$.sh + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } fi @@ -61,20 +88,19 @@ # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) -as_nl=' -' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +as_myself= +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -85,352 +111,328 @@ as_myself=$0 fi if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE # CDPATH. -$as_unset CDPATH - +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then - if (eval ":") 2>/dev/null; then - as_have_required=yes + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST else - as_have_required=no + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi - - if test $as_have_required = yes && (eval ": -(as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : -if as_func_ret_success; then - : else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes else - exitcode=1 - echo positional parameters were not saved. + as_have_required=no fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : -test \$exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=\$LINENO - as_lineno_2=\$LINENO - test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && - test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -") 2> /dev/null; then - : -else - as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - case $as_dir in + as_found=: + case $as_dir in #( /*) for as_base in sh bash ksh sh5; do - as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi done;; esac + as_found=false done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } IFS=$as_save_IFS - for as_shell in $as_candidate_shells $SHELL; do - # Try only shells that exist, to save several forks. - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { ("$as_shell") 2> /dev/null <<\_ASEOF -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -: -_ASEOF -}; then - CONFIG_SHELL=$as_shell - as_have_required=yes - if { "$as_shell" 2> /dev/null <<\_ASEOF -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -: -(as_func_return () { - (exit $1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = "$1" ); then - : -else - exitcode=1 - echo positional parameters were not saved. + if test "x$CONFIG_SHELL" != x; then : + # We cannot yet assume a decent shell, so we have to provide a + # neutralization value for shells without unset; and this also + # works around shells that cannot unset nonexistent variables. + # Preserve -v and -x to the replacement shell. + BASH_ENV=/dev/null + ENV=/dev/null + (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV + export CONFIG_SHELL + case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; + esac + exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} fi -test $exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -_ASEOF -}; then - break + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and tf@o-hand.com +$0: about your system, including any error possibly output +$0: before this message. Then install a modern shell, or +$0: manually run the script under such a shell if you do +$0: have one." + fi + exit 1 fi - fi - - done - - if test "x$CONFIG_SHELL" != x; then - for as_var in BASH_ENV ENV - do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset - if test $as_have_required = no; then - echo This script requires a shell more modern than all the - echo shells that I found on your system. Please install a - echo modern shell, or manually run the script under such a - echo shell if you do have one. - { (exit 1); exit 1; } -fi +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ -fi + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" -fi +} # as_fn_mkdir_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -(eval "as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error -exitcode=0 -if as_func_success; then - : +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. + as_expr=false fi -if as_func_ret_success; then - : +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. + as_basename=false fi -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname else - exitcode=1 - echo positional parameters were not saved. + as_dirname=false fi -test \$exitcode = 0") || { - echo No shell found that supports shell functions. - echo Please tell autoconf@gnu.org about your system, - echo including any error possibly output before this - echo message -} +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= @@ -447,8 +449,7 @@ s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the @@ -458,49 +459,40 @@ exit } - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir - mkdir conf$$.dir + mkdir conf$$.dir 2>/dev/null fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln + fi else as_ln_s='cp -p' fi @@ -508,25 +500,34 @@ rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -# Find out whether ``test -x'' works. Don't use a zero-byte file, as -# systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - as_executable_p="test -x" +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' else - as_executable_p=: + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in #( + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' fi -rm -f conf$$.file +as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -535,11 +536,11 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -exec 7<&0 &1 +test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` @@ -554,7 +555,6 @@ subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='exmap-console' @@ -562,106 +562,128 @@ PACKAGE_VERSION='0.4.1' PACKAGE_STRING='exmap-console 0.4.1' PACKAGE_BUGREPORT='tf@o-hand.com' +PACKAGE_URL='' ac_unique_file="src/exmap.c" -ac_subst_vars='SHELL -PATH_SEPARATOR -PACKAGE_NAME -PACKAGE_TARNAME -PACKAGE_VERSION -PACKAGE_STRING -PACKAGE_BUGREPORT -exec_prefix -prefix -program_transform_name -bindir -sbindir -libexecdir -datarootdir -datadir -sysconfdir -sharedstatedir -localstatedir -includedir -oldincludedir -docdir -infodir -htmldir -dvidir -pdfdir -psdir -libdir -localedir -mandir -DEFS -ECHO_C -ECHO_N -ECHO_T -LIBS +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +GCC_CFLAGS +HAVE_HELPTOMAN_FALSE +HAVE_HELPTOMAN_TRUE +HELPTOMAN +GLIB_LIBS +GLIB_CFLAGS +PKG_CONFIG_LIBDIR +PKG_CONFIG_PATH +PKG_CONFIG +DODOCS_FALSE +DODOCS_TRUE +READLINE_CFLAGS +READLINE_LIBS +INTERACTIVE_FALSE +INTERACTIVE_TRUE +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +with_readline +enable_dependency_tracking +enable_doc +with_help2man +' + ac_precious_vars='build_alias host_alias target_alias -INSTALL_PROGRAM -INSTALL_SCRIPT -INSTALL_DATA -CYGPATH_W -PACKAGE -VERSION -ACLOCAL -AUTOCONF -AUTOMAKE -AUTOHEADER -MAKEINFO -install_sh -STRIP -INSTALL_STRIP_PROGRAM -mkdir_p -AWK -SET_MAKE -am__leading_dot -AMTAR -am__tar -am__untar CC CFLAGS LDFLAGS +LIBS CPPFLAGS -ac_ct_CC -EXEEXT -OBJEXT -DEPDIR -am__include -am__quote -AMDEP_TRUE -AMDEP_FALSE -AMDEPBACKSLASH -CCDEPMODE -am__fastdepCC_TRUE -am__fastdepCC_FALSE -INTERACTIVE_TRUE -INTERACTIVE_FALSE -READLINE_LIBS -READLINE_CFLAGS -DODOCS_TRUE -DODOCS_FALSE -PKG_CONFIG -GLIB_CFLAGS -GLIB_LIBS -HELPTOMAN -HAVE_HELPTOMAN_TRUE -HAVE_HELPTOMAN_FALSE -GCC_CFLAGS -LIBOBJS -LTLIBOBJS' -ac_subst_files='' - ac_precious_vars='build_alias -host_alias -target_alias CC -CFLAGS LDFLAGS +LIBS CPPFLAGS PKG_CONFIG +PKG_CONFIG_PATH +PKG_CONFIG_LIBDIR GLIB_CFLAGS GLIB_LIBS' @@ -669,6 +691,8 @@ # Initialize some variables set by options. ac_init_help= ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null @@ -724,8 +748,9 @@ fi case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. @@ -767,13 +792,20 @@ datarootdir=$ac_optarg ;; -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval enable_$ac_feature=no ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; @@ -786,13 +818,20 @@ dvidir=$ac_optarg ;; -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval enable_$ac_feature=\$ac_optarg ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -983,22 +1022,36 @@ ac_init_version=: ;; -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval with_$ac_package=\$ac_optarg ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval with_$ac_package=no ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. @@ -1018,26 +1071,26 @@ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac @@ -1045,23 +1098,36 @@ if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "missing argument to $ac_option" fi -# Be sure to have absolute directory names. +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -1075,8 +1141,8 @@ if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 + $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1091,23 +1157,21 @@ ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - { echo "$as_me: error: Working directory cannot be determined" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - { echo "$as_me: error: pwd does not report name of working directory" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$0" || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X"$0" | + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -1134,13 +1198,11 @@ fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1180,7 +1242,7 @@ --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files @@ -1188,9 +1250,9 @@ Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] + [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] + [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify @@ -1200,25 +1262,25 @@ For better control, use the options below. Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/exmap-console] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/exmap-console] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF @@ -1237,12 +1299,12 @@ cat <<\_ACEOF Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --disable-doc Do not build documentation - --enable-debug Enable debuggin information Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] @@ -1255,9 +1317,14 @@ CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory - CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory PKG_CONFIG path to pkg-config utility + PKG_CONFIG_PATH + directories to add to pkg-config's search path + PKG_CONFIG_LIBDIR + path overriding pkg-config's built-in search path GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config GLIB_LIBS linker flags for GLIB, overriding pkg-config @@ -1272,15 +1339,17 @@ if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; @@ -1316,7 +1385,7 @@ echo && $SHELL "$ac_srcdir/configure" --help=recursive else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done @@ -1326,21 +1395,108 @@ if $ac_init_version; then cat <<\_ACEOF exmap-console configure 0.4.1 -generated by GNU Autoconf 2.60 +generated by GNU Autoconf 2.68 -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by exmap-console $as_me 0.4.1, which was -generated by GNU Autoconf 2.60. Invocation command line was +generated by GNU Autoconf 2.68. Invocation command line was $ $0 $@ @@ -1376,8 +1532,8 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done + $as_echo "PATH: $as_dir" + done IFS=$as_save_IFS } >&5 @@ -1411,12 +1567,12 @@ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" + as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else @@ -1432,13 +1588,13 @@ -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args '$ac_arg'" + as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -1450,11 +1606,9 @@ { echo - cat <<\_ASBOX -## ---------------- ## + $as_echo "## ---------------- ## ## Cache variables. ## -## ---------------- ## -_ASBOX +## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( @@ -1463,12 +1617,13 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -1487,128 +1642,136 @@ ) echo - cat <<\_ASBOX -## ----------------- ## + $as_echo "## ----------------- ## ## Output variables. ## -## ----------------- ## -_ASBOX +## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac - echo "$ac_var='\''$ac_val'\''" + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## + $as_echo "## ------------------- ## ## File substitutions. ## -## ------------------- ## -_ASBOX +## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac - echo "$ac_var='\''$ac_val'\''" + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## + $as_echo "## ----------- ## ## confdefs.h. ## -## ----------- ## -_ASBOX +## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h +$as_echo "/* confdefs.h */" > confdefs.h + # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + # Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE if test -n "$CONFIG_SITE"; then - set x "$CONFIG_SITE" + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac elif test "x$prefix" != xNONE; then - set x "$prefix/share/config.site" "$prefix/etc/config.site" + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site else - set x "$ac_default_prefix/share/config.site" \ - "$ac_default_prefix/etc/config.site" + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site fi -shift -for ac_site_file +for ac_site_file in "$ac_site_file1" "$ac_site_file2" do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi @@ -1622,68 +1785,56 @@ eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in - *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - - - - - - - - - - - - - - - - - - - - - - - - + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -1694,7 +1845,8 @@ -am__api_version="1.9" +am__api_version='1.11' + ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then @@ -1712,9 +1864,7 @@ fi done if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 -echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -1739,22 +1889,23 @@ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. -{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -1762,7 +1913,7 @@ # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -1772,17 +1923,29 @@ # program-specific install script used by HP pwplus--don't use. : else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi fi fi done done ;; esac -done + + done IFS=$as_save_IFS +rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then @@ -1795,8 +1958,8 @@ INSTALL=$ac_install_sh fi fi -{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. @@ -1806,21 +1969,34 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; +esac + # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` + set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ @@ -1830,11 +2006,8 @@ # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file @@ -1843,204 +2016,50 @@ # Ok. : else - { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 fi -{ echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. echo might interpret backslashes. +# Double any \ or $. # By default was `s,x,x', remove it if useless. -cat <<\_ACEOF >conftest.sed -s/[\\$]/&&/g;s/;s,x,x,$// -_ACEOF -program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm -f conftest.sed +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= - { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi - - test -n "$AWK" && break -done - -{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } -set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - SET_MAKE= -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac fi - -# Define the identity of the package. - PACKAGE='exmap-console' - VERSION='0.4.1' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -install_sh=${install_sh-"$am_aux_dir/install-sh"} - # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake @@ -2049,10 +2068,10 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. @@ -2062,25 +2081,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - { echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -2089,10 +2108,10 @@ ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. @@ -2102,48 +2121,224 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + am__leading_dot=_ fi +rmdir .tst 2>/dev/null - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi -else - STRIP="$ac_cv_prog_STRIP" fi +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + + +# Define the identity of the package. + PACKAGE='exmap-console' + VERSION='0.4.1' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # We need awk for the "check" target. The system "awk" is bad on # some platforms. @@ -2165,7 +2360,7 @@ # Check whether --with-readline was given. -if test "${with_readline+set}" = set; then +if test "${with_readline+set}" = set; then : withval=$with_readline; WITH_READLINE=$enableval else WITH_READLINE=yes @@ -2182,44 +2377,44 @@ am_make=${MAKE-make} cat > confinc << 'END' am__doit: - @echo done + @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac fi -{ echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then +if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi @@ -2227,9 +2422,7 @@ am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi - - -if test "x$enable_dependency_tracking" != xno; then + if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else @@ -2238,7 +2431,6 @@ fi - ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -2247,10 +2439,10 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -2260,25 +2452,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -2287,10 +2479,10 @@ ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -2300,25 +2492,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then @@ -2326,12 +2518,8 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC @@ -2344,10 +2532,10 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -2357,25 +2545,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -2384,10 +2572,10 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -2398,18 +2586,18 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then @@ -2428,11 +2616,11 @@ fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -2443,10 +2631,10 @@ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -2456,25 +2644,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -2487,10 +2675,10 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -2500,25 +2688,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -2530,12 +2718,8 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC @@ -2545,51 +2729,37 @@ fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. -echo "$as_me:$LINENO: checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2601,59 +2771,55 @@ } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -# -# List of possible output files, starting from the most likely. -# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) -# only as a last resort. b.out is created by i960 compilers. -ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' -# -# The IRIX 6 linker writes into existing files which may not be -# executable, retaining their permissions. Remove them first so a -# subsequent execution test works. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + ac_rmfiles= for ac_file in $ac_files do case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles -if { (ac_try="$ac_link_default" +if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. -for ac_file in $ac_files +for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi @@ -2670,76 +2836,43 @@ test "$ac_cv_exeext" = no && ac_cv_exeext= else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } + ac_file='' fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext -{ echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6; } - -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -{ echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } -rm -f a.out a.exe conftest$ac_cv_exeext b.out +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } -{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6; } - -{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } -if { (ac_try="$ac_link" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -2747,37 +2880,90 @@ for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2789,51 +2975,46 @@ } _ACEOF rm -f conftest.o conftest.obj -if { (ac_try="$ac_compile" +if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else - echo "$as_me: failed program was:" >&5 + $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } fi - rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2847,71 +3028,34 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no + ac_compiler_gnu=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } -GCC=`test $ac_compiler_gnu = yes && echo yes` +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2922,51 +3066,11 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2977,52 +3081,12 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_compile "$LINENO"; then : - ac_c_werror_flag=$ac_save_c_werror_flag +else + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -3033,59 +3097,18 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi -{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -3101,18 +3124,14 @@ CFLAGS= fi fi -{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -3169,48 +3188,9 @@ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done @@ -3221,17 +3201,19 @@ # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) - { echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6; } ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; xno) - { echo "$as_me:$LINENO: result: unsupported" >&5 -echo "${ECHO_T}unsupported" >&6; } ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" - { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -3241,10 +3223,10 @@ depcc="$CC" am_compiler_list= -{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up @@ -3269,6 +3251,11 @@ if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -3286,7 +3273,17 @@ done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -3296,18 +3293,23 @@ break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -3331,13 +3333,11 @@ fi fi -{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - -if + if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= @@ -3349,18 +3349,14 @@ -{ echo "$as_me:$LINENO: checking for readline in -lreadline" >&5 -echo $ECHO_N "checking for readline in -lreadline... $ECHO_C" >&6; } -if test "${ac_cv_lib_readline_readline+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for readline in -lreadline" >&5 +$as_echo_n "checking for readline in -lreadline... " >&6; } +if ${ac_cv_lib_readline_readline+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lreadline $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -3378,72 +3374,31 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_readline_readline=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_readline_readline=no + ac_cv_lib_readline_readline=no fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_readline_readline" >&5 -echo "${ECHO_T}$ac_cv_lib_readline_readline" >&6; } -if test $ac_cv_lib_readline_readline = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_readline_readline" >&5 +$as_echo "$ac_cv_lib_readline_readline" >&6; } +if test "x$ac_cv_lib_readline_readline" = xyes; then : WORKING_READLINE=yes else WORKING_READLINE=no fi -{ echo "$as_me:$LINENO: checking for add_history in -lhistory" >&5 -echo $ECHO_N "checking for add_history in -lhistory... $ECHO_C" >&6; } -if test "${ac_cv_lib_history_add_history+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for add_history in -lhistory" >&5 +$as_echo_n "checking for add_history in -lhistory... " >&6; } +if ${ac_cv_lib_history_add_history+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lhistory $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -3461,55 +3416,18 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_history_add_history=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_history_add_history=no + ac_cv_lib_history_add_history=no fi - rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_history_add_history" >&5 -echo "${ECHO_T}$ac_cv_lib_history_add_history" >&6; } -if test $ac_cv_lib_history_add_history = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_history_add_history" >&5 +$as_echo "$ac_cv_lib_history_add_history" >&6; } +if test "x$ac_cv_lib_history_add_history" = xyes; then : WORKING_READLINE=yes else WORKING_READLINE=no @@ -3524,9 +3442,7 @@ fi fi - - -if test "x$WITH_READLINE" = "xyes"; then + if test "x$WITH_READLINE" = "xyes"; then INTERACTIVE_TRUE= INTERACTIVE_FALSE='#' else @@ -3544,7 +3460,7 @@ # Check whether --enable-doc was given. -if test "${enable_doc+set}" = set; then +if test "${enable_doc+set}" = set; then : enableval=$enable_doc; DO_DOCS=$enableval else DO_DOCS=$enableval @@ -3553,16 +3469,14 @@ # Check whether --with-help2man was given. -if test "${with_help2man+set}" = set; then +if test "${with_help2man+set}" = set; then : withval=$with_help2man; WITH_H2MAN=$withval else WITH_H2MAN=yes fi - - -if test "x$DO_DOCS" != "xno"; then + if test "x$DO_DOCS" != "xno"; then DODOCS_TRUE= DODOCS_FALSE='#' else @@ -3571,14 +3485,6 @@ fi -# Check whether --enable-debug was given. -if test "${enable_debug+set}" = set; then - enableval=$enable_debug; CFLAGS="-g -O0" -else - CFLAGS="-g -O2" -fi - - CFLAGS="$CFLAGS -DEXMAP_VERSION=\\\"$EXMAP_VERSION\\\" -DEXMAP_PROTOCOL_VERSION=\\\"$EXMAP_PROTOCOL_VERSION\\\"" @@ -3591,10 +3497,10 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -3604,25 +3510,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -3631,10 +3537,10 @@ ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -3644,25 +3550,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then @@ -3670,12 +3576,8 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC @@ -3688,10 +3590,10 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -3701,25 +3603,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -3728,10 +3630,10 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -3742,18 +3644,18 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then @@ -3772,11 +3674,11 @@ fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -3787,10 +3689,10 @@ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -3800,25 +3702,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -3831,10 +3733,10 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -3844,25 +3746,25 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -3874,12 +3776,8 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC @@ -3889,56 +3787,42 @@ fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. -echo "$as_me:$LINENO: checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -3952,71 +3836,34 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no + ac_compiler_gnu=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } -GCC=`test $ac_compiler_gnu = yes && echo yes` +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4027,51 +3874,11 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4082,52 +3889,12 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_compile "$LINENO"; then : - ac_c_werror_flag=$ac_save_c_werror_flag +else + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4138,59 +3905,18 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi -{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -4206,18 +3932,14 @@ CFLAGS= fi fi -{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -4274,48 +3996,9 @@ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then + if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done @@ -4326,17 +4009,19 @@ # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) - { echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6; } ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; xno) - { echo "$as_me:$LINENO: result: unsupported" >&5 -echo "${ECHO_T}unsupported" >&6; } ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" - { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -4346,10 +4031,10 @@ depcc="$CC" am_compiler_list= -{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up @@ -4374,6 +4059,11 @@ if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -4391,7 +4081,17 @@ done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -4401,18 +4101,23 @@ break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -4436,13 +4141,11 @@ fi fi -{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - -if + if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= @@ -4456,14 +4159,18 @@ + + + + if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_PKG_CONFIG+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 else case $PKG_CONFIG in [\\/]* | ?:[\\/]*) @@ -4475,14 +4182,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS ;; @@ -4490,11 +4197,11 @@ fi PKG_CONFIG=$ac_cv_path_PKG_CONFIG if test -n "$PKG_CONFIG"; then - { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 -echo "${ECHO_T}$PKG_CONFIG" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -4503,10 +4210,10 @@ ac_pt_PKG_CONFIG=$PKG_CONFIG # Extract the first word of "pkg-config", so it can be a program name with args. set dummy pkg-config; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 else case $ac_pt_PKG_CONFIG in [\\/]* | ?:[\\/]*) @@ -4518,14 +4225,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS ;; @@ -4533,11 +4240,11 @@ fi ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG if test -n "$ac_pt_PKG_CONFIG"; then - { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 -echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi if test "x$ac_pt_PKG_CONFIG" = x; then @@ -4545,12 +4252,8 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac PKG_CONFIG=$ac_pt_PKG_CONFIG @@ -4562,63 +4265,60 @@ fi if test -n "$PKG_CONFIG"; then _pkg_min_version=0.9.0 - { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 -echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } PKG_CONFIG="" fi - fi pkg_failed=no -{ echo "$as_me:$LINENO: checking for GLIB" >&5 -echo $ECHO_N "checking for GLIB... $ECHO_C" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GLIB" >&5 +$as_echo_n "checking for GLIB... " >&6; } -if test -n "$PKG_CONFIG"; then - if test -n "$GLIB_CFLAGS"; then - pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0\"") >&5 +if test -n "$GLIB_CFLAGS"; then + pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "glib-2.0") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0" 2>/dev/null` else pkg_failed=yes fi - fi -else - pkg_failed=untried + else + pkg_failed=untried fi -if test -n "$PKG_CONFIG"; then - if test -n "$GLIB_LIBS"; then - pkg_cv_GLIB_LIBS="$GLIB_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0\"") >&5 +if test -n "$GLIB_LIBS"; then + pkg_cv_GLIB_LIBS="$GLIB_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0\""; } >&5 ($PKG_CONFIG --exists --print-errors "glib-2.0") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0" 2>/dev/null` else pkg_failed=yes fi - fi -else - pkg_failed=untried + else + pkg_failed=untried fi if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes @@ -4626,25 +4326,14 @@ _pkg_short_errors_supported=no fi if test $_pkg_short_errors_supported = yes; then - GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0"` + GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "glib-2.0" 2>&1` else - GLIB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0"` + GLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors "glib-2.0" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$GLIB_PKG_ERRORS" >&5 - { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0) were not met: - -$GLIB_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GLIB_CFLAGS -and GLIB_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (glib-2.0) were not met: + as_fn_error $? "Package requirements (glib-2.0) were not met: $GLIB_PKG_ERRORS @@ -4653,21 +4342,13 @@ Alternatively, you may set the environment variables GLIB_CFLAGS and GLIB_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } +See the pkg-config man page for more details." "$LINENO" 5 elif test $pkg_failed = untried; then - { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GLIB_CFLAGS -and GLIB_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. @@ -4675,15 +4356,14 @@ and GLIB_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +To get pkg-config, see . +See \`config.log' for more details" "$LINENO" 5; } else GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS GLIB_LIBS=$pkg_cv_GLIB_LIBS - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + fi @@ -4695,10 +4375,10 @@ #autodetect, error if not found # Extract the first word of "help2man", so it can be a program name with args. set dummy help2man; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_HELPTOMAN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_HELPTOMAN+:} false; then : + $as_echo_n "(cached) " >&6 else case $HELPTOMAN in [\\/]* | ?:[\\/]*) @@ -4710,14 +4390,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_HELPTOMAN="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS test -z "$ac_cv_path_HELPTOMAN" && ac_cv_path_HELPTOMAN="no" @@ -4726,18 +4406,16 @@ fi HELPTOMAN=$ac_cv_path_HELPTOMAN if test -n "$HELPTOMAN"; then - { echo "$as_me:$LINENO: result: $HELPTOMAN" >&5 -echo "${ECHO_T}$HELPTOMAN" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HELPTOMAN" >&5 +$as_echo "$HELPTOMAN" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi if test "x$HELPTOMAN" = "xno" ; then - { { echo "$as_me:$LINENO: error: help2man not found -- either install it or use --without-help2man or --disable-doc" >&5 -echo "$as_me: error: help2man not found -- either install it or use --without-help2man or --disable-doc" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "help2man not found -- either install it or use --without-help2man or --disable-doc" "$LINENO" 5 fi else if test x$WITH_H2MAN = xno ; then @@ -4749,10 +4427,10 @@ if test x$H2M_PATH = x$WITH_H2MAN ; then # Extract the first word of "$H2M_PROG", so it can be a program name with args. set dummy $H2M_PROG; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_HELPTOMAN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_HELPTOMAN+:} false; then : + $as_echo_n "(cached) " >&6 else case $HELPTOMAN in [\\/]* | ?:[\\/]*) @@ -4764,14 +4442,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_HELPTOMAN="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS test -z "$ac_cv_path_HELPTOMAN" && ac_cv_path_HELPTOMAN="no" @@ -4780,21 +4458,21 @@ fi HELPTOMAN=$ac_cv_path_HELPTOMAN if test -n "$HELPTOMAN"; then - { echo "$as_me:$LINENO: result: $HELPTOMAN" >&5 -echo "${ECHO_T}$HELPTOMAN" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HELPTOMAN" >&5 +$as_echo "$HELPTOMAN" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi else # Extract the first word of "$H2M_PROG", so it can be a program name with args. set dummy $H2M_PROG; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_HELPTOMAN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_HELPTOMAN+:} false; then : + $as_echo_n "(cached) " >&6 else case $HELPTOMAN in [\\/]* | ?:[\\/]*) @@ -4806,14 +4484,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_HELPTOMAN="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS test -z "$ac_cv_path_HELPTOMAN" && ac_cv_path_HELPTOMAN="no" @@ -4822,28 +4500,24 @@ fi HELPTOMAN=$ac_cv_path_HELPTOMAN if test -n "$HELPTOMAN"; then - { echo "$as_me:$LINENO: result: $HELPTOMAN" >&5 -echo "${ECHO_T}$HELPTOMAN" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HELPTOMAN" >&5 +$as_echo "$HELPTOMAN" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi fi if test "x$HELPTOMAN" = "xno" ; then - { { echo "$as_me:$LINENO: error: $WITH_H2MAN not found" >&5 -echo "$as_me: error: $WITH_H2MAN not found" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "$WITH_H2MAN not found" "$LINENO" 5 fi fi fi fi - - -if test "x$HELPTOMAN" != "xno"; then + if test "x$HELPTOMAN" != "xno"; then HAVE_HELPTOMAN_TRUE= HAVE_HELPTOMAN_FALSE='#' else @@ -4889,12 +4563,13 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -4902,8 +4577,8 @@ (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" @@ -4925,13 +4600,24 @@ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi else - { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -echo "$as_me: not updating unwritable cache $cache_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache @@ -4948,6 +4634,12 @@ # take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} t clear :clear s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g @@ -4974,69 +4666,62 @@ ac_libobjs= ac_ltlibobjs= +U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`echo "$ac_i" | sed "$ac_script"` + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${INTERACTIVE_TRUE}" && test -z "${INTERACTIVE_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"INTERACTIVE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"INTERACTIVE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"INTERACTIVE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${DODOCS_TRUE}" && test -z "${DODOCS_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"DODOCS\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"DODOCS\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"DODOCS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${HAVE_HELPTOMAN_TRUE}" && test -z "${HAVE_HELPTOMAN_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"HAVE_HELPTOMAN\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"HAVE_HELPTOMAN\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"HAVE_HELPTOMAN\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi -: ${CONFIG_STATUS=./config.status} +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -5046,55 +4731,79 @@ debug=false ac_cs_recheck=false ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' else - PATH_SEPARATOR=: + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' fi - rm -f conf$$.sh + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } fi @@ -5103,20 +4812,19 @@ # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) -as_nl=' -' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +as_myself= +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -5127,32 +4835,111 @@ as_myself=$0 fi if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + -# Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -5166,13 +4953,17 @@ as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | +$as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q @@ -5187,122 +4978,130 @@ } s/.*/./; q'` -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir - mkdir conf$$.dir + mkdir conf$$.dir 2>/dev/null fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln + fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -# Find out whether ``test -x'' works. Don't use a zero-byte file, as -# systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - as_executable_p="test -x" +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' else - as_executable_p=: + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in #( + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' fi -rm -f conf$$.file +as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -5312,13 +5111,19 @@ exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -# Save the log message, to keep $[0] and so on meaningful, and to +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by exmap-console $as_me 0.4.1, which was -generated by GNU Autoconf 2.60. Invocation command line was +generated by GNU Autoconf 2.68. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -5331,27 +5136,36 @@ _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_commands="$ac_config_commands" _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. -Usage: $0 [OPTIONS] [FILE]... +Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE Configuration files: $config_files @@ -5359,36 +5173,44 @@ Configuration commands: $config_commands -Report bugs to ." +Report bugs to ." _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ exmap-console config.status 0.4.1 -configured by $0, generated by GNU Autoconf 2.60, - with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" +configured by $0, generated by GNU Autoconf 2.68, + with options \\"\$ac_cs_config\\" -Copyright (C) 2006 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in - --*=*) + --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; *) ac_option=$1 ac_optarg=$2 @@ -5401,25 +5223,30 @@ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - echo "$ac_cs_version"; exit ;; + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --he | --h | --help | --hel | -h ) - echo "$ac_cs_usage"; exit ;; + $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. - -*) { echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; - *) ac_config_targets="$ac_config_targets $1" + *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac @@ -5434,27 +5261,29 @@ fi _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then - echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - CONFIG_SHELL=$SHELL + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' export CONFIG_SHELL - exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + exec "\$@" fi _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX - echo "$ac_log" + $as_echo "$ac_log" } >&5 _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # @@ -5462,7 +5291,7 @@ _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets @@ -5473,9 +5302,7 @@ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done @@ -5497,200 +5324,194 @@ # after its creation but before its name has been assigned to `$tmp'. $debug || { - tmp= + tmp= ac_tmp= trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 + trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" + test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -# -# Set up the sed scripts for CONFIG_FILES section. -# +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then -_ACEOF +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do - cat >conf$$subs.sed <<_ACEOF -SHELL!$SHELL$ac_delim -PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -PACKAGE_NAME!$PACKAGE_NAME$ac_delim -PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -PACKAGE_STRING!$PACKAGE_STRING$ac_delim -PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -exec_prefix!$exec_prefix$ac_delim -prefix!$prefix$ac_delim -program_transform_name!$program_transform_name$ac_delim -bindir!$bindir$ac_delim -sbindir!$sbindir$ac_delim -libexecdir!$libexecdir$ac_delim -datarootdir!$datarootdir$ac_delim -datadir!$datadir$ac_delim -sysconfdir!$sysconfdir$ac_delim -sharedstatedir!$sharedstatedir$ac_delim -localstatedir!$localstatedir$ac_delim -includedir!$includedir$ac_delim -oldincludedir!$oldincludedir$ac_delim -docdir!$docdir$ac_delim -infodir!$infodir$ac_delim -htmldir!$htmldir$ac_delim -dvidir!$dvidir$ac_delim -pdfdir!$pdfdir$ac_delim -psdir!$psdir$ac_delim -libdir!$libdir$ac_delim -localedir!$localedir$ac_delim -mandir!$mandir$ac_delim -DEFS!$DEFS$ac_delim -ECHO_C!$ECHO_C$ac_delim -ECHO_N!$ECHO_N$ac_delim -ECHO_T!$ECHO_T$ac_delim -LIBS!$LIBS$ac_delim -build_alias!$build_alias$ac_delim -host_alias!$host_alias$ac_delim -target_alias!$target_alias$ac_delim -INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim -INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim -INSTALL_DATA!$INSTALL_DATA$ac_delim -CYGPATH_W!$CYGPATH_W$ac_delim -PACKAGE!$PACKAGE$ac_delim -VERSION!$VERSION$ac_delim -ACLOCAL!$ACLOCAL$ac_delim -AUTOCONF!$AUTOCONF$ac_delim -AUTOMAKE!$AUTOMAKE$ac_delim -AUTOHEADER!$AUTOHEADER$ac_delim -MAKEINFO!$MAKEINFO$ac_delim -install_sh!$install_sh$ac_delim -STRIP!$STRIP$ac_delim -INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim -mkdir_p!$mkdir_p$ac_delim -AWK!$AWK$ac_delim -SET_MAKE!$SET_MAKE$ac_delim -am__leading_dot!$am__leading_dot$ac_delim -AMTAR!$AMTAR$ac_delim -am__tar!$am__tar$ac_delim -am__untar!$am__untar$ac_delim -CC!$CC$ac_delim -CFLAGS!$CFLAGS$ac_delim -LDFLAGS!$LDFLAGS$ac_delim -CPPFLAGS!$CPPFLAGS$ac_delim -ac_ct_CC!$ac_ct_CC$ac_delim -EXEEXT!$EXEEXT$ac_delim -OBJEXT!$OBJEXT$ac_delim -DEPDIR!$DEPDIR$ac_delim -am__include!$am__include$ac_delim -am__quote!$am__quote$ac_delim -AMDEP_TRUE!$AMDEP_TRUE$ac_delim -AMDEP_FALSE!$AMDEP_FALSE$ac_delim -AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim -CCDEPMODE!$CCDEPMODE$ac_delim -am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim -am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim -INTERACTIVE_TRUE!$INTERACTIVE_TRUE$ac_delim -INTERACTIVE_FALSE!$INTERACTIVE_FALSE$ac_delim -READLINE_LIBS!$READLINE_LIBS$ac_delim -READLINE_CFLAGS!$READLINE_CFLAGS$ac_delim -DODOCS_TRUE!$DODOCS_TRUE$ac_delim -DODOCS_FALSE!$DODOCS_FALSE$ac_delim -PKG_CONFIG!$PKG_CONFIG$ac_delim -GLIB_CFLAGS!$GLIB_CFLAGS$ac_delim -GLIB_LIBS!$GLIB_LIBS$ac_delim -HELPTOMAN!$HELPTOMAN$ac_delim -HAVE_HELPTOMAN_TRUE!$HAVE_HELPTOMAN_TRUE$ac_delim -HAVE_HELPTOMAN_FALSE!$HAVE_HELPTOMAN_FALSE$ac_delim -GCC_CFLAGS!$GCC_CFLAGS$ac_delim -LIBOBJS!$LIBOBJS$ac_delim -LTLIBOBJS!$LTLIBOBJS$ac_delim -_ACEOF + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 89; then + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done +rm -f conf$$subs.sh -ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -if test -n "$ac_eof"; then - ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` - ac_eof=`expr $ac_eof + 1` -fi - -cat >>$CONFIG_STATUS <<_ACEOF -cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -_ACEOF -sed ' -s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -s/^/s,@/; s/!/@,|#_!!_#|/ -:n -t n -s/'"$ac_delim"'$/,g/; t -s/$/\\/; p -N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF -:end -s/|#_!!_#|//g -CEOF$ac_eof +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// s/^[^=]*=[ ]*$// }' fi -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" -for ac_tag in :F $CONFIG_FILES :C $CONFIG_COMMANDS +eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS" +shift +for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -echo "$as_me: error: Invalid tag $ac_tag." >&2;} - { (exit 1); exit 1; }; };; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -5709,7 +5530,7 @@ for ac_f do case $ac_f in - -) ac_f="$tmp/stdin";; + -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. @@ -5718,26 +5539,34 @@ [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac - ac_file_inputs="$ac_file_inputs $ac_f" + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ - configure_input="Generated from "`IFS=: - echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin";; + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac @@ -5747,42 +5576,7 @@ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | +$as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -5800,20 +5594,15 @@ q } s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } + as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; @@ -5851,14 +5640,19 @@ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= - -case `sed -n '/datarootdir/ { +ac_sed_dataroot=' +/datarootdir/ { p q } @@ -5866,36 +5660,37 @@ /@docdir@/p /@infodir@/p /@localedir@/p -/@mandir@/p -' $ac_file_inputs` in +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; + s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub $extrasub _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s&@configure_input@&$configure_input&;t t +s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t @@ -5904,48 +5699,64 @@ s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack -" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} - rm -f "$tmp/stdin" + rm -f "$ac_tmp/stdin" case $ac_file in - -) cat "$tmp/out"; rm -f "$tmp/out";; - *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; - esac + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 -echo "$as_me: executing $ac_file commands" >&6;} + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || -echo X"$mf" | +$as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -5963,68 +5774,33 @@ q } s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir=$dirpart/$fdir - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | +$as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -6042,27 +5818,25 @@ q } s/.*/./; q'` - test -d "$as_dir" && break + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" done -done +} ;; esac done # for ac_tag -{ (exit 0); exit 0; } +as_fn_exit 0 _ACEOF -chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. @@ -6082,14 +5856,18 @@ exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi if test x$WITH_READLINE = xerror ; then - { echo "$as_me:$LINENO: result: WARNING: Could not link against readline libraries; interactive mode will not be available." >&5 -echo "${ECHO_T}WARNING: Could not link against readline libraries; interactive mode will not be available." >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: WARNING: Could not link against readline libraries; interactive mode will not be available." >&5 +$as_echo "WARNING: Could not link against readline libraries; interactive mode will not be available." >&6; } fi -{ echo "$as_me:$LINENO: result: Type make to build exmap-console." >&5 -echo "${ECHO_T}Type make to build exmap-console." >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: Type make to build exmap-console." >&5 +$as_echo "Type make to build exmap-console." >&6; } diff -Nur exmap-console-0.4.1.orig/configure.ac exmap-console-0.4.1/configure.ac --- exmap-console-0.4.1.orig/configure.ac 2007-02-26 12:00:48.000000000 +0100 +++ exmap-console-0.4.1/configure.ac 2011-01-11 12:44:09.000000000 +0100 @@ -46,10 +46,6 @@ AM_CONDITIONAL(DODOCS, test "x$DO_DOCS" != "xno") -AC_ARG_ENABLE(debug, AS_HELP_STRING([--enable-debug], - [Enable debuggin information]), - [CFLAGS="-g -O0"], [CFLAGS="-g -O2"]) - CFLAGS="$CFLAGS -DEXMAP_VERSION=\\\"$EXMAP_VERSION\\\" -DEXMAP_PROTOCOL_VERSION=\\\"$EXMAP_PROTOCOL_VERSION\\\"" AC_SUBST(CFLAGS) diff -Nur exmap-console-0.4.1.orig/depcomp exmap-console-0.4.1/depcomp --- exmap-console-0.4.1.orig/depcomp 2007-02-26 12:44:02.000000000 +0100 +++ exmap-console-0.4.1/depcomp 2011-01-11 12:44:16.000000000 +0100 @@ -1,9 +1,10 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2005-07-09.11 +scriptversion=2009-04-28.21; # UTC -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free +# Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -16,9 +17,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -86,12 +85,34 @@ depmode=dashmstdout fi +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u="sed s,\\\\\\\\,/,g" + depmode=msvisualcpp +fi + case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" stat=$? if test $stat -eq 0; then : else @@ -178,14 +199,14 @@ ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' -' ' ' >> $depfile - echo >> $depfile +' ' ' >> "$depfile" + echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile + >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -201,34 +222,39 @@ # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. - stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u "$@" -M fi stat=$? - if test -f "$tmpdepfile"; then : - else - stripped=`echo "$stripped" | sed 's,^.*/,,'` - tmpdepfile="$stripped.u" - fi - if test $stat -eq 0; then : else - rm -f "$tmpdepfile" + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done if test -f "$tmpdepfile"; then - outname="$stripped.o" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -276,6 +302,51 @@ rm -f "$tmpdepfile" ;; +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. @@ -288,13 +359,13 @@ if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a - # static library. This mecanism is used in libtool 1.4 series to + # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in in $dir.libs/$base.o.d and + # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is @@ -345,7 +416,7 @@ # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift @@ -396,32 +467,39 @@ "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift - cleared=no - for arg in "$@"; do + cleared=no eat=no + for arg + do case $cleared in no) set ""; shift cleared=yes ;; esac + if test $eat = yes; then + eat=no + continue + fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done - obj_suffix="`echo $object | sed 's/^.*\././'`" + obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" @@ -441,7 +519,7 @@ # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift @@ -479,13 +557,27 @@ msvisualcpp) # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. + # always write the preprocessed file to stdout. "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + IFS=" " for arg do case "$arg" in + -o) + shift + ;; + $object) + shift + ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift @@ -498,16 +590,23 @@ ;; esac done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + none) exec "$@" ;; @@ -526,5 +625,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -Nur exmap-console-0.4.1.orig/doc/Makefile.in exmap-console-0.4.1/doc/Makefile.in --- exmap-console-0.4.1.orig/doc/Makefile.in 2007-02-26 12:44:02.000000000 +0100 +++ exmap-console-0.4.1/doc/Makefile.in 2011-01-11 12:44:16.000000000 +0100 @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,15 +14,12 @@ # PARTICULAR PURPOSE. @SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -41,16 +39,36 @@ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff MANS = $(man_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ @@ -63,8 +81,6 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DODOCS_FALSE = @DODOCS_FALSE@ -DODOCS_TRUE = @DODOCS_TRUE@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ @@ -72,38 +88,41 @@ GCC_CFLAGS = @GCC_CFLAGS@ GLIB_CFLAGS = @GLIB_CFLAGS@ GLIB_LIBS = @GLIB_LIBS@ -HAVE_HELPTOMAN_FALSE = @HAVE_HELPTOMAN_FALSE@ -HAVE_HELPTOMAN_TRUE = @HAVE_HELPTOMAN_TRUE@ HELPTOMAN = @HELPTOMAN@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTERACTIVE_FALSE = @INTERACTIVE_FALSE@ -INTERACTIVE_TRUE = @INTERACTIVE_TRUE@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ READLINE_CFLAGS = @READLINE_CFLAGS@ READLINE_LIBS = @READLINE_LIBS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -111,6 +130,7 @@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ +builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ @@ -134,8 +154,12 @@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ DISTCLEANFILES = *~ Makefile.in @DODOCS_TRUE@@INTERACTIVE_TRUE@interactive = exmapserver.1 @DODOCS_TRUE@man_MANS = exmap.1 exmapd.1 $(interactive) @@ -146,14 +170,14 @@ @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu doc/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -171,52 +195,45 @@ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -uninstall-info-am: -install-man1: $(man1_MANS) $(man_MANS) +$(am__aclocal_m4_deps): +install-man1: $(man_MANS) @$(NORMAL_INSTALL) - test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ + test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" + @list=''; test -n "$(man1dir)" || exit 0; \ + { for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + uninstall-man1: @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ - done + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + test -z "$$files" || { \ + echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } tags: TAGS TAGS: @@ -225,29 +242,45 @@ distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically \`make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -256,7 +289,7 @@ all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man1dir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am @@ -278,6 +311,7 @@ distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @@ -297,18 +331,38 @@ html: html-am +html-am: + info: info-am info-am: install-data-am: install-man +install-dvi: install-dvi-am + +install-dvi-am: + install-exec-am: +install-html: install-html-am + +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man1 +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -327,18 +381,22 @@ ps-am: -uninstall-am: uninstall-info-am uninstall-man +uninstall-am: uninstall-man uninstall-man: uninstall-man1 +.MAKE: install-am install-strip + .PHONY: all all-am check check-am clean clean-generic distclean \ distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-man1 install-strip installcheck installcheck-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-man1 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ installdirs maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ - uninstall-am uninstall-info-am uninstall-man uninstall-man1 + uninstall-am uninstall-man uninstall-man1 @DODOCS_TRUE@@HAVE_HELPTOMAN_TRUE@exmap.1: ../src/exmap ./man.include @@ -349,6 +407,7 @@ @DODOCS_TRUE@@HAVE_HELPTOMAN_TRUE@@INTERACTIVE_TRUE@exmapserver.1: ../src/exmapserver ./man-s.include @DODOCS_TRUE@@HAVE_HELPTOMAN_TRUE@@INTERACTIVE_TRUE@ $(HELPTOMAN) -N -I ./man-s.include -m "Exmap server" ../src/exmapserver > ./exmapserver.1 + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -Nur exmap-console-0.4.1.orig/install-sh exmap-console-0.4.1/install-sh --- exmap-console-0.4.1.orig/install-sh 2007-02-26 12:44:02.000000000 +0100 +++ exmap-console-0.4.1/install-sh 2011-01-11 12:44:16.000000000 +0100 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2005-05-14.22 +scriptversion=2009-04-28.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -39,38 +39,68 @@ # when there is no Makefile. # # This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. +# from scratch. + +nl=' +' +IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi -# put in absolute paths if you don't have them in your path; or use env. vars. +# Put in absolute file names if you don't have them in your path; +# or use environment vars. -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 -chmodcmd="$chmodprog 0755" -chowncmd= chgrpcmd= -stripcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog rmcmd="$rmprog -f" -mvcmd="$mvprog" +stripcmd= + src= dst= dir_arg= -dstarg= +dst_arg= + +copy_on_change=false no_target_directory= -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... @@ -80,81 +110,86 @@ In the 4th, create DIRECTORIES. Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG " -while test -n "$1"; do +while test $# -ne 0; do case $1 in - -c) shift - continue;; + -c) ;; - -d) dir_arg=true - shift - continue;; + -C) copy_on_change=true;; + + -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; + shift;; --help) echo "$usage"; exit $?;; - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done + --) shift break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; esac + shift done -if test -z "$1"; then +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 @@ -164,24 +199,47 @@ exit 0 fi +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + for src do # Protect names starting with `-'. case $src in - -*) src=./$src ;; + -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src - src= - - if test -d "$dst"; then - mkdircmd=: - chmodcmd= - else - mkdircmd=$mkdirprog - fi + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. @@ -190,71 +248,199 @@ exit 1 fi - if test -z "$dstarg"; then + if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi - dst=$dstarg + dst=$dst_arg # Protect names starting with `-'. case $dst in - -*) dst=./$dst ;; + -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 + echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi - dst=$dst/`basename "$src"` + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? fi fi - # This sed command emulates the dirname command. - dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` - - # Make sure that the destination directory exists. + obsolete_mkdir_used=false - # Skip lots of stat calls in the usual case. - if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" - - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - shift - IFS=$oIFS + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac - pathcomp= + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir shift - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # mkdir can fail with a `File exist' error in case several - # install-sh are creating the directory concurrently. This - # is OK. - test -d "$pathcomp" || exit + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi - pathcomp=$pathcomp/ - done + fi fi if test -n "$dir_arg"; then - $doit $mkdircmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } - + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else - dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ @@ -262,10 +448,9 @@ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - trap '(exit $?); exit' 1 2 13 15 # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # @@ -273,51 +458,63 @@ # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ - || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" - } - } - fi || { (exit 1); exit 1; } -done + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || -# The final little trick to "correctly" pass the exit status to the exit trap. -{ - (exit 0); exit 0 -} + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -Nur exmap-console-0.4.1.orig/missing exmap-console-0.4.1/missing --- exmap-console-0.4.1.orig/missing 2007-02-26 12:44:02.000000000 +0100 +++ exmap-console-0.4.1/missing 2011-01-11 12:44:16.000000000 +0100 @@ -1,10 +1,10 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2005-06-08.21 +scriptversion=2009-04-28.21; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify @@ -18,9 +18,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -33,6 +31,8 @@ fi run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. @@ -44,7 +44,7 @@ msg="missing on your system" -case "$1" in +case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= @@ -77,6 +77,7 @@ aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c @@ -86,6 +87,9 @@ tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + Send bug reports to ." exit $? ;; @@ -103,15 +107,22 @@ esac +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) # Not GNU programs, they don't have --version. ;; - tar) + tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 @@ -135,7 +146,7 @@ # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case "$1" in +case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -145,7 +156,7 @@ touch aclocal.m4 ;; - autoconf) + autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the @@ -154,7 +165,7 @@ touch configure ;; - autoheader) + autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want @@ -164,7 +175,7 @@ test -z "$files" && files="config.h" touch_files= for f in $files; do - case "$f" in + case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; @@ -184,7 +195,7 @@ while read f; do touch "$f"; done ;; - autom4te) + autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the @@ -192,8 +203,8 @@ You can get \`$1' as part of \`Autoconf' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else @@ -207,80 +218,78 @@ fi ;; - bison|yacc) + bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi - if [ ! -f y.tab.h ]; then + if test ! -f y.tab.h; then echo >y.tab.h fi - if [ ! -f y.tab.c ]; then + if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; - lex|flex) + lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi - if [ ! -f lex.yy.c ]; then + if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; - help2man) + help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" - exit 1 + exit $? fi ;; - makeinfo) + makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file @@ -289,11 +298,17 @@ DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi @@ -303,7 +318,7 @@ touch $file ;; - tar) + tar*) shift # We have already tried tar in the generic part. @@ -317,13 +332,13 @@ fi firstarg="$1" if shift; then - case "$firstarg" in + case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac - case "$firstarg" in + case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 @@ -356,5 +371,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -Nur exmap-console-0.4.1.orig/src/Makefile.in exmap-console-0.4.1/src/Makefile.in --- exmap-console-0.4.1.orig/src/Makefile.in 2007-02-26 12:44:02.000000000 +0100 +++ exmap-console-0.4.1/src/Makefile.in 2011-01-11 12:44:16.000000000 +0100 @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,15 +15,12 @@ @SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -43,8 +41,8 @@ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am__exmap_SOURCES_DIST = interactive.c exmap.c exelf.c @INTERACTIVE_TRUE@am__objects_1 = interactive.$(OBJEXT) @@ -58,9 +56,10 @@ am_exmapserver_OBJECTS = exmapserver.$(OBJEXT) exmapserver_OBJECTS = $(am_exmapserver_OBJECTS) exmapserver_DEPENDENCIES = $(am__DEPENDENCIES_1) -DEFAULT_INCLUDES = -I. -I$(srcdir) +DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) @@ -72,8 +71,6 @@ CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ @@ -86,8 +83,6 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DODOCS_FALSE = @DODOCS_FALSE@ -DODOCS_TRUE = @DODOCS_TRUE@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ @@ -95,38 +90,41 @@ GCC_CFLAGS = @GCC_CFLAGS@ GLIB_CFLAGS = @GLIB_CFLAGS@ GLIB_LIBS = @GLIB_LIBS@ -HAVE_HELPTOMAN_FALSE = @HAVE_HELPTOMAN_FALSE@ -HAVE_HELPTOMAN_TRUE = @HAVE_HELPTOMAN_TRUE@ HELPTOMAN = @HELPTOMAN@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTERACTIVE_FALSE = @INTERACTIVE_FALSE@ -INTERACTIVE_TRUE = @INTERACTIVE_TRUE@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ READLINE_CFLAGS = @READLINE_CFLAGS@ READLINE_LIBS = @READLINE_LIBS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -134,6 +132,7 @@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ +builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ @@ -157,8 +156,12 @@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ INCLUDES = -DSBINDIR=\"$(sbindir)\" AM_CFLAGS = $(GCC_CFLAGS) $(GLIB_CFLAGS) $(READLINE_CFLAGS) @INTERACTIVE_TRUE@interactive = interactive.c @@ -177,14 +180,14 @@ @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -202,38 +205,53 @@ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) exmap$(EXEEXT): $(exmap_OBJECTS) $(exmap_DEPENDENCIES) @rm -f exmap$(EXEEXT) - $(LINK) $(exmap_LDFLAGS) $(exmap_OBJECTS) $(exmap_LDADD) $(LIBS) + $(LINK) $(exmap_OBJECTS) $(exmap_LDADD) $(LIBS) exmapd$(EXEEXT): $(exmapd_OBJECTS) $(exmapd_DEPENDENCIES) @rm -f exmapd$(EXEEXT) - $(LINK) $(exmapd_LDFLAGS) $(exmapd_OBJECTS) $(exmapd_LDADD) $(LIBS) + $(LINK) $(exmapd_OBJECTS) $(exmapd_LDADD) $(LIBS) exmapserver$(EXEEXT): $(exmapserver_OBJECTS) $(exmapserver_DEPENDENCIES) @rm -f exmapserver$(EXEEXT) - $(LINK) $(exmapserver_LDFLAGS) $(exmapserver_OBJECTS) $(exmapserver_LDADD) $(LIBS) + $(LINK) $(exmapserver_OBJECTS) $(exmapserver_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -248,92 +266,98 @@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/interactive.Po@am__quote@ .c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` -uninstall-info-am: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -342,7 +366,7 @@ all-am: Makefile $(PROGRAMS) installdirs: for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am @@ -364,6 +388,7 @@ distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @@ -385,18 +410,38 @@ html: html-am +html-am: + info: info-am info-am: install-data-am: +install-dvi: install-dvi-am + +install-dvi-am: + install-exec-am: install-binPROGRAMS +install-html: install-html-am + +install-html-am: + install-info: install-info-am +install-info-am: + install-man: +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -416,18 +461,23 @@ ps-am: -uninstall-am: uninstall-binPROGRAMS uninstall-info-am +uninstall-am: uninstall-binPROGRAMS + +.MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ clean-generic ctags distclean distclean-compile \ distclean-generic distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-binPROGRAMS \ - install-data install-data-am install-exec install-exec-am \ - install-info install-info-am install-man install-strip \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-binPROGRAMS uninstall-info-am + uninstall-am uninstall-binPROGRAMS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded.