From fca416596e51e2516bfea297bec145d90a4f3caa Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Fri, 11 Feb 2022 01:55:30 +0100 Subject: j2: update to gcc 10.3.0 --- toolchain/gcc/patches/10.3.0/j2.patch | 346 ++++++++++++++++++++++++++++++++++ 1 file changed, 346 insertions(+) create mode 100644 toolchain/gcc/patches/10.3.0/j2.patch (limited to 'toolchain') diff --git a/toolchain/gcc/patches/10.3.0/j2.patch b/toolchain/gcc/patches/10.3.0/j2.patch new file mode 100644 index 000000000..416475546 --- /dev/null +++ b/toolchain/gcc/patches/10.3.0/j2.patch @@ -0,0 +1,346 @@ +diff --git a/gcc/config.gcc b/gcc/config.gcc +index 6fcdd771d4c..839a60d866e 100644 +--- a/gcc/config.gcc ++++ b/gcc/config.gcc +@@ -547,7 +547,7 @@ s390*-*-*) + extra_headers="s390intrin.h htmintrin.h htmxlintrin.h vecintrin.h" + ;; + # Note the 'l'; we need to be able to match e.g. "shle" or "shl". +-sh[123456789lbe]*-*-* | sh-*-*) ++sh[123456789lbej]*-*-* | sh-*-*) + cpu_type=sh + extra_options="${extra_options} fused-madd.opt" + extra_objs="${extra_objs} sh_treg_combine.o sh-mem.o sh_optimize_sett_clrt.o" +@@ -3149,18 +3149,18 @@ s390x-ibm-tpf*) + extra_options="${extra_options} s390/tpf.opt" + tmake_file="${tmake_file} s390/t-s390" + ;; +-sh-*-elf* | sh[12346l]*-*-elf* | \ +- sh-*-linux* | sh[2346lbe]*-*-linux* | \ ++sh-*-elf* | sh[12346lj]*-*-elf* | \ ++ sh-*-linux* | sh[2346lbej]*-*-linux* | \ + sh-*-netbsdelf* | shl*-*-netbsdelf*) + tmake_file="${tmake_file} sh/t-sh sh/t-elf" + if test x${with_endian} = x; then + case ${target} in +- sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;; ++ sh[j1234]*be-*-* | sh[j1234]*eb-*-*) with_endian=big ;; + shbe-*-* | sheb-*-*) with_endian=big,little ;; + sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;; + shl* | sh*-*-linux* | \ + sh-superh-elf) with_endian=little,big ;; +- sh[1234]*-*-*) with_endian=big ;; ++ sh[j1234]*-*-*) with_endian=big ;; + *) with_endian=big,little ;; + esac + fi +@@ -3227,6 +3227,7 @@ sh-*-elf* | sh[12346l]*-*-elf* | \ + sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;; + sh2a*) sh_cpu_target=sh2a ;; + sh2e*) sh_cpu_target=sh2e ;; ++ shj2*) sh_cpu_target=shj2;; + sh2*) sh_cpu_target=sh2 ;; + *) sh_cpu_target=sh1 ;; + esac +@@ -3248,7 +3249,7 @@ sh-*-elf* | sh[12346l]*-*-elf* | \ + sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \ + sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \ + sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \ +- sh3e | sh3 | sh2e | sh2 | sh1) ;; ++ sh3e | sh3 | sh2e | sh2 | sh1 | shj2) ;; + "") sh_cpu_default=${sh_cpu_target} ;; + *) echo "with_cpu=$with_cpu not supported"; exit 1 ;; + esac +@@ -3257,9 +3258,9 @@ sh-*-elf* | sh[12346l]*-*-elf* | \ + case ${target} in + sh[1234]*) sh_multilibs=${sh_cpu_target} ;; + sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;; +- sh*-*-linux*) sh_multilibs=m1,m2,m2a,m3e,m4 ;; ++ sh*-*-linux*) sh_multilibs=m1,m2,m2a,m3e,m4,mj2 ;; + sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;; +- *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;; ++ *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single,mj2 ;; + esac + if test x$with_fp = xno; then + sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`" +@@ -3274,7 +3275,8 @@ sh-*-elf* | sh[12346l]*-*-elf* | \ + m1 | m2 | m2e | m3 | m3e | \ + m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\ + m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \ +- m2a | m2a-single | m2a-single-only | m2a-nofpu) ++ m2a | m2a-single | m2a-single-only | m2a-nofpu | \ ++ mj2) + # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition + # It is passed to MULTIILIB_OPTIONS verbatim. + TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}" +@@ -3291,7 +3293,7 @@ sh-*-elf* | sh[12346l]*-*-elf* | \ + done + TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'` + if test x${enable_incomplete_targets} = xyes ; then +- tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1" ++ tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SHJ2=1" + fi + tm_file="$tm_file ./sysroot-suffix.h" + tmake_file="$tmake_file t-sysroot-suffix" +@@ -5105,6 +5107,8 @@ case "${target}" in + ;; + m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al) + ;; ++ mj2) ++ ;; + *) + echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2 + echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2 +@@ -5315,7 +5319,7 @@ case ${target} in + tmake_file="${cpu_type}/t-${cpu_type} ${tmake_file}" + ;; + +- sh[123456ble]*-*-* | sh-*-*) ++ sh[123456blej]*-*-* | sh-*-*) + c_target_objs="${c_target_objs} sh-c.o" + cxx_target_objs="${cxx_target_objs} sh-c.o" + ;; +diff --git a/gcc/config/sh/sh.c b/gcc/config/sh/sh.c +index 84c0ea025b4..f15552af011 100644 +--- a/gcc/config/sh/sh.c ++++ b/gcc/config/sh/sh.c +@@ -686,6 +686,7 @@ parse_validate_atomic_model_option (const char* str) + model_names[sh_atomic_model::hard_llcs] = "hard-llcs"; + model_names[sh_atomic_model::soft_tcb] = "soft-tcb"; + model_names[sh_atomic_model::soft_imask] = "soft-imask"; ++ model_names[sh_atomic_model::hard_cas] = "hard-cas"; + + const char* model_cdef_names[sh_atomic_model::num_models]; + model_cdef_names[sh_atomic_model::none] = "NONE"; +@@ -693,6 +694,7 @@ parse_validate_atomic_model_option (const char* str) + model_cdef_names[sh_atomic_model::hard_llcs] = "HARD_LLCS"; + model_cdef_names[sh_atomic_model::soft_tcb] = "SOFT_TCB"; + model_cdef_names[sh_atomic_model::soft_imask] = "SOFT_IMASK"; ++ model_cdef_names[sh_atomic_model::hard_cas] = "HARD_CAS"; + + sh_atomic_model ret; + ret.type = sh_atomic_model::none; +@@ -771,6 +773,9 @@ got_mode_name:; + if (ret.type == sh_atomic_model::soft_imask && TARGET_USERMODE) + err_ret ("cannot use atomic model %s in user mode", ret.name); + ++ if (ret.type == sh_atomic_model::hard_cas && !TARGET_SHJ2) ++ err_ret ("atomic model %s is only available J2 targets", ret.name); ++ + return ret; + + #undef err_ret +@@ -827,6 +832,8 @@ sh_option_override (void) + sh_cpu = PROCESSOR_SH2E; + if (TARGET_SH2A) + sh_cpu = PROCESSOR_SH2A; ++ if (TARGET_SHJ2) ++ sh_cpu = PROCESSOR_SHJ2; + if (TARGET_SH3) + sh_cpu = PROCESSOR_SH3; + if (TARGET_SH3E) +diff --git a/gcc/config/sh/sh.h b/gcc/config/sh/sh.h +index 8ab5455505c..6ffed6da403 100644 +--- a/gcc/config/sh/sh.h ++++ b/gcc/config/sh/sh.h +@@ -85,6 +85,7 @@ extern int code_for_indirect_jump_scratch; + #define SUPPORT_SH4_SINGLE 1 + #define SUPPORT_SH2A 1 + #define SUPPORT_SH2A_SINGLE 1 ++#define SUPPORT_SHJ2 1 + #endif + + #define TARGET_DIVIDE_CALL_DIV1 (sh_div_strategy == SH_DIV_CALL_DIV1) +@@ -117,6 +118,7 @@ extern int code_for_indirect_jump_scratch; + #define SELECT_SH4A_SINGLE_ONLY (MASK_SH4A | SELECT_SH4_SINGLE_ONLY) + #define SELECT_SH4A (MASK_SH4A | SELECT_SH4) + #define SELECT_SH4A_SINGLE (MASK_SH4A | SELECT_SH4_SINGLE) ++#define SELECT_SHJ2 (MASK_SHJ2 | SELECT_SH2) + + #if SUPPORT_SH1 + #define SUPPORT_SH2 1 +@@ -124,6 +126,7 @@ extern int code_for_indirect_jump_scratch; + #if SUPPORT_SH2 + #define SUPPORT_SH3 1 + #define SUPPORT_SH2A_NOFPU 1 ++#define SUPPORT_SHJ2 1 + #endif + #if SUPPORT_SH3 + #define SUPPORT_SH4_NOFPU 1 +@@ -156,7 +159,7 @@ extern int code_for_indirect_jump_scratch; + #define MASK_ARCH (MASK_SH1 | MASK_SH2 | MASK_SH3 | MASK_SH_E | MASK_SH4 \ + | MASK_HARD_SH2A | MASK_HARD_SH2A_DOUBLE | MASK_SH4A \ + | MASK_HARD_SH4 | MASK_FPU_SINGLE \ +- | MASK_FPU_SINGLE_ONLY) ++ | MASK_FPU_SINGLE_ONLY | MASK_SHJ2) + + /* This defaults us to big-endian. */ + #ifndef TARGET_ENDIAN_DEFAULT +@@ -231,7 +234,8 @@ extern int code_for_indirect_jump_scratch; + %{m2a-single:--isa=sh2a} \ + %{m2a-single-only:--isa=sh2a} \ + %{m2a-nofpu:--isa=sh2a-nofpu} \ +-%{m4al:-dsp}" ++%{m4al:-dsp} \ ++%{mj2:-isa=j2}" + + #define ASM_SPEC SH_ASM_SPEC + +@@ -347,6 +351,7 @@ struct sh_atomic_model + hard_llcs, + soft_tcb, + soft_imask, ++ hard_cas, + + num_models + }; +@@ -390,6 +395,9 @@ extern const sh_atomic_model& selected_atomic_model (void); + #define TARGET_ATOMIC_SOFT_IMASK \ + (selected_atomic_model ().type == sh_atomic_model::soft_imask) + ++#define TARGET_ATOMIC_HARD_CAS \ ++ (selected_atomic_model ().type == sh_atomic_model::hard_cas) ++ + #endif // __cplusplus + + #define SUBTARGET_OVERRIDE_OPTIONS (void) 0 +@@ -1484,7 +1492,7 @@ extern bool current_function_interrupt; + + /* Nonzero if the target supports dynamic shift instructions + like shad and shld. */ +-#define TARGET_DYNSHIFT (TARGET_SH3 || TARGET_SH2A) ++#define TARGET_DYNSHIFT (TARGET_SH3 || TARGET_SH2A || TARGET_SHJ2) + + /* The cost of using the dynamic shift insns (shad, shld) are the same + if they are available. If they are not available a library function will +@@ -1747,6 +1755,7 @@ enum processor_type { + PROCESSOR_SH2, + PROCESSOR_SH2E, + PROCESSOR_SH2A, ++ PROCESSOR_SHJ2, + PROCESSOR_SH3, + PROCESSOR_SH3E, + PROCESSOR_SH4, +diff --git a/gcc/config/sh/sh.opt b/gcc/config/sh/sh.opt +index 908603b92e1..e6108dabbc6 100644 +--- a/gcc/config/sh/sh.opt ++++ b/gcc/config/sh/sh.opt +@@ -65,6 +65,10 @@ m2e + Target RejectNegative Condition(SUPPORT_SH2E) + Generate SH2e code. + ++mj2 ++Target RejectNegative Mask(SHJ2) Condition(SUPPORT_SHJ2) ++Generate J2 code. ++ + m3 + Target RejectNegative Mask(SH3) Condition(SUPPORT_SH3) + Generate SH3 code. +diff --git a/gcc/config/sh/sync.md b/gcc/config/sh/sync.md +index 25f3b695d2f..55119386a18 100644 +--- a/gcc/config/sh/sync.md ++++ b/gcc/config/sh/sync.md +@@ -240,6 +240,9 @@ + || (TARGET_SH4A && mode == SImode && !TARGET_ATOMIC_STRICT)) + atomic_insn = gen_atomic_compare_and_swap_hard (old_val, mem, + exp_val, new_val); ++ else if (TARGET_ATOMIC_HARD_CAS && mode == SImode) ++ atomic_insn = gen_atomic_compare_and_swap_cas (old_val, mem, ++ exp_val, new_val); + else if (TARGET_ATOMIC_SOFT_GUSA) + atomic_insn = gen_atomic_compare_and_swap_soft_gusa (old_val, mem, + exp_val, new_val); +@@ -306,6 +309,57 @@ + } + [(set_attr "length" "14")]) + ++(define_expand "atomic_compare_and_swapsi_cas" ++ [(set (match_operand:SI 0 "register_operand" "=r") ++ (unspec_volatile:SI ++ [(match_operand:SI 1 "atomic_mem_operand_0" "=Sra") ++ (match_operand:SI 2 "register_operand" "r") ++ (match_operand:SI 3 "register_operand" "r")] ++ UNSPECV_CMPXCHG_1))] ++ "TARGET_ATOMIC_HARD_CAS" ++{ ++ rtx mem = gen_rtx_REG (SImode, 0); ++ emit_move_insn (mem, force_reg (SImode, XEXP (operands[1], 0))); ++ emit_insn (gen_shj2_cas (operands[0], mem, operands[2], operands[3])); ++ DONE; ++}) ++ ++(define_insn "shj2_cas" ++ [(set (match_operand:SI 0 "register_operand" "=&r") ++ (unspec_volatile:SI ++ [(match_operand:SI 1 "register_operand" "=r") ++ (match_operand:SI 2 "register_operand" "r") ++ (match_operand:SI 3 "register_operand" "0")] ++ UNSPECV_CMPXCHG_1)) ++ (set (reg:SI T_REG) ++ (unspec_volatile:SI [(const_int 0)] UNSPECV_CMPXCHG_3))] ++ "TARGET_ATOMIC_HARD_CAS" ++ "cas.l %2,%0,@%1" ++ [(set_attr "length" "2")] ++) ++ ++(define_expand "atomic_compare_and_swapqi_cas" ++ [(set (match_operand:SI 0 "arith_reg_dest" "=&r") ++ (unspec_volatile:SI ++ [(match_operand:SI 1 "atomic_mem_operand_0" "=Sra") ++ (match_operand:SI 2 "arith_operand" "rI08") ++ (match_operand:SI 3 "arith_operand" "rI08")] ++ UNSPECV_CMPXCHG_1))] ++ "TARGET_ATOMIC_HARD_CAS" ++{FAIL;} ++) ++ ++(define_expand "atomic_compare_and_swaphi_cas" ++ [(set (match_operand:SI 0 "arith_reg_dest" "=&r") ++ (unspec_volatile:SI ++ [(match_operand:SI 1 "atomic_mem_operand_0" "=Sra") ++ (match_operand:SI 2 "arith_operand" "rI08") ++ (match_operand:SI 3 "arith_operand" "rI08")] ++ UNSPECV_CMPXCHG_1))] ++ "TARGET_ATOMIC_HARD_CAS" ++{FAIL;} ++) ++ + ;; The QIHImode llcs patterns modify the address register of the memory + ;; operand. In order to express that, we have to open code the memory + ;; operand. Initially the insn is expanded like every other atomic insn +diff --git a/gcc/config/sh/t-sh b/gcc/config/sh/t-sh +index a402359be72..dbd0bf992bf 100644 +--- a/gcc/config/sh/t-sh ++++ b/gcc/config/sh/t-sh +@@ -50,7 +50,8 @@ MULTILIB_MATCHES = $(shell \ + m2e,m3e,m4-single-only,m4-100-single-only,m4-200-single-only,m4-300-single-only,m4a-single-only \ + m2a-single,m2a-single-only \ + m4-single,m4-100-single,m4-200-single,m4-300-single,m4a-single \ +- m4,m4-100,m4-200,m4-300,m4a; do \ ++ m4,m4-100,m4-200,m4-300,m4a \ ++ mj2; do \ + subst= ; \ + for lib in `echo $$abi|tr , ' '` ; do \ + if test "`echo $$multilibs|sed s/$$lib//`" != "$$multilibs"; then \ +@@ -63,9 +64,9 @@ MULTILIB_MATCHES = $(shell \ + + # SH1 and SH2A support big endian only. + ifeq ($(DEFAULT_ENDIAN),ml) +-MULTILIB_EXCEPTIONS = m1 ml/m1 m2a* ml/m2a* $(TM_MULTILIB_EXCEPTIONS_CONFIG) ++MULTILIB_EXCEPTIONS = m1 ml/m1 m2a* ml/m2a* ml/mj2 $(TM_MULTILIB_EXCEPTIONS_CONFIG) + else +-MULTILIB_EXCEPTIONS = ml/m1 ml/m2a* $(TM_MULTILIB_EXCEPTIONS_CONFIG) ++MULTILIB_EXCEPTIONS = ml/m1 ml/m2a* ml/mj2 $(TM_MULTILIB_EXCEPTIONS_CONFIG) + endif + + MULTILIB_OSDIRNAMES = \ +@@ -87,7 +88,8 @@ MULTILIB_OSDIRNAMES = \ + m4a-single-only=!m4a-single-only $(OTHER_ENDIAN)/m4a-single-only=!$(OTHER_ENDIAN)/m4a-single-only \ + m4a-single=!m4a-single $(OTHER_ENDIAN)/m4a-single=!$(OTHER_ENDIAN)/m4a-single \ + m4a=!m4a $(OTHER_ENDIAN)/m4a=!$(OTHER_ENDIAN)/m4a \ +- m4al=!m4al $(OTHER_ENDIAN)/m4al=!$(OTHER_ENDIAN)/m4al ++ m4al=!m4al $(OTHER_ENDIAN)/m4al=!$(OTHER_ENDIAN)/m4al \ ++ mj2=!j2 + + $(out_object_file): gt-sh.h + gt-sh.h : s-gtype ; @true -- cgit v1.2.3