From 185f430dbf2c36415930941eced92723824950d6 Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Mon, 30 Sep 2019 17:54:28 +0200 Subject: remove unfinished alternative os porting efforts --- target/waldux/config/Config.in.usb | 378 ------------------------------------- 1 file changed, 378 deletions(-) delete mode 100644 target/waldux/config/Config.in.usb (limited to 'target/waldux/config/Config.in.usb') diff --git a/target/waldux/config/Config.in.usb b/target/waldux/config/Config.in.usb deleted file mode 100644 index 04d4e7756..000000000 --- a/target/waldux/config/Config.in.usb +++ /dev/null @@ -1,378 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -menu "USB support" -depends on ADK_TARGET_WITH_USB \ - || ADK_TARGET_SYSTEM_QEMU_X86_64 \ - || ADK_TARGET_SYSTEM_QEMU_X86 \ - || ADK_TARGET_GENERIC - -config ADK_WALDUX_KERNEL_USB_SUPPORT - bool - -config ADK_WALDUX_KERNEL_USB_DEVICE_CLASS - bool - -config ADK_WALDUX_KERNEL_USB_ANNOUNCE_NEW_DEVICES - bool - -config ADK_WALDUX_KERNEL_USB_EHCI_ROOT_HUB_TT - bool - -config ADK_WALDUX_KERNEL_USB_EHCI_TT_NEWSCHED - bool - -config ADK_WALDUX_KERNEL_USB_EHCI_MXC - bool - -config ADK_WALDUX_KERNEL_USB_GADGET - tristate - -config ADK_WALDUX_KERNEL_USB_PHY - bool - -config ADK_WALDUX_KERNEL_USB_MXS_PHY - tristate - select ADK_WALDUX_KERNEL_USB_PHY - default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default n - -config ADK_WALDUX_KERNEL_USB_OHCI_HCD_PLATFORM - bool - select ADK_WALDUX_KERNEL_USB_OHCI_HCD - -config ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI - bool - -config ADK_WALDUX_KERNEL_USB_LIBUSUAL - tristate - -config ADK_WALDUX_KERNEL_USB_NET_DRIVERS - bool - -config ADK_WALDUX_KERNEL_USB_USBNET - select ADK_WALDUX_KERNEL_USB_NET_DRIVERS - tristate - -config ADK_WALDUX_KERNEL_USB - tristate "USB support" - select ADK_WALDUX_KERNEL_NLS - select ADK_WALDUX_KERNEL_USB_SUPPORT - select ADK_WALDUX_KERNEL_USB_ANNOUNCE_NEW_DEVICES - default m if ADK_TARGET_SYSTEM_ASUS_P5BVM - default m if ADK_TARGET_SYSTEM_PCENGINES_APU - default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX - default m if ADK_TARGET_SYSTEM_IBM_X40 - default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG - default m if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 - default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default y if ADK_TARGET_SYSTEM_KINETIS_K70 - default y if ADK_TARGET_SYSTEM_SOLIDRUN_CLEARFOG - default n - help - Universal Serial Bus (USB) is a specification for a serial bus - subsystem which offers higher speeds and more features than the - traditional PC serial port. The bus supplies power to peripherals - and allows for hot swapping. Up to 127 USB peripherals can be - connected to a single USB host in a tree structure. - - The USB host is the root of the tree, the peripherals are the - leaves and the inner nodes are special USB devices called hubs. - Most PCs now have USB host ports, used to connect peripherals - such as scanners, keyboards, mice, modems, cameras, disks, - flash memory, network links, and printers to the PC. - - Say Y here if your computer has a host-side USB port and you want - to use USB devices. You then need to say Y to at least one of the - Host Controller Driver (HCD) options below. Choose a USB 1.1 - controller, such as "UHCI HCD support" or "OHCI HCD support", - and "EHCI HCD (USB 2.0) support" except for older systems that - do not have USB 2.0 support. It doesn't normally hurt to select - them all if you are not certain. - - If your system has a device-side USB port, used in the peripheral - side of the USB protocol, see the "USB Gadget" framework instead. - - After choosing your HCD, then select drivers for the USB peripherals - you'll be using. You may want to check out the information provided - in and especially the links given in - . - -menu "USB controller support" - -config ADK_WALDUX_KERNEL_USB_EHCI_HCD - tristate "Support for USB EHCI 2.0 controllers" - select ADK_WALDUX_KERNEL_USB_MXS_PHY if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - select ADK_WALDUX_KERNEL_USB_EHCI_MXC if ADK_TARGET_SYSTEM_KINETIS_K70 - select ADK_WALDUX_KERNEL_USB_DEVICE_CLASS if ADK_TARGET_SYSTEM_KINETIS_K70 - depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 - depends on !ADK_TARGET_BOARD_BCM28XX - depends on ADK_WALDUX_KERNEL_USB - default m if ADK_TARGET_SYSTEM_ASUS_P5BVM - default m if ADK_TARGET_SYSTEM_PCENGINES_APU - default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX - default m if ADK_TARGET_SYSTEM_IBM_X40 - default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG - default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default y if ADK_TARGET_SYSTEM_KINETIS_K70 - default y if ADK_TARGET_SYSTEM_SOLIDRUN_CLEARFOG - default n - help - The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 - "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. - If your USB host controller supports USB 2.0, you will likely want to - configure this Host Controller Driver. At the time of this writing, - the primary implementation of EHCI is a chip from NEC, widely available - in add-on PCI cards, but implementations are in the works from other - vendors including Intel and Philips. Motherboard support is appearing. - - EHCI controllers are packaged with "companion" host controllers (OHCI - or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports - will connect to EHCI if the device is high speed, otherwise they - connect to a companion controller. If you configure EHCI, you should - probably configure the OHCI (for NEC and some other vendors) USB Host - Controller Driver or UHCI (for Via motherboards) Host Controller - Driver too. - - You may want to read . - -config ADK_WALDUX_KERNEL_USB_UHCI_HCD - tristate "Support for UHCI controllers" - depends on ADK_WALDUX_KERNEL_USB - depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 - depends on !ADK_TARGET_BOARD_BCM28XX - default m if ADK_TARGET_SYSTEM_ASUS_P5BVM - default m if ADK_TARGET_SYSTEM_PCENGINES_APU - default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX - default m if ADK_TARGET_SYSTEM_IBM_X40 - default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG - default n - help - The Universal Host Controller Interface is a standard by Intel for - accessing the USB hardware in the PC (which is also called the USB - host controller). If your USB host controller conforms to this - standard, you may want to say Y, but see below. All recent boards - with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, - i810, i820) conform to this standard. Also all VIA PCI chipsets - (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro - 133). If unsure, say Y. - -config ADK_WALDUX_KERNEL_USB_OHCI_HCD - tristate "Support for OHCI controllers" - depends on ADK_WALDUX_KERNEL_USB - depends on !ADK_TARGET_BOARD_BCM28XX - select ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI if ADK_TARGET_SYSTEM_PCENGINES_ALIX - select ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI if ADK_TARGET_SYSTEM_PCENGINES_APU - select ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI if ADK_TARGET_SYSTEM_ASUS_P5BVM - default m if ADK_TARGET_SYSTEM_ASUS_P5BVM - default m if ADK_TARGET_SYSTEM_PCENGINES_APU - default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX - default m if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 - default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG - default n - help - The Open Host Controller Interface (OHCI) is a standard for accessing - USB 1.1 host controller hardware. It does more in hardware than Intel's - UHCI specification. If your USB host controller follows the OHCI spec, - say Y. On most non-x86 systems, and on x86 hardware that's not using a - USB controller from Intel or VIA, this is appropriate. If your host - controller doesn't use PCI, this is probably appropriate. For a PCI - based system where you're not sure, the "lspci -v" entry will list the - right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI. - -config ADK_WALDUX_KERNEL_USB_DWCOTG - bool "Support for DWCOTG controller" - select ADK_WALDUX_KERNEL_USB - select ADK_WALDUX_KERNEL_FIQ - depends on ADK_TARGET_BOARD_BCM28XX - default y if ADK_TARGET_BOARD_BCM28XX - default n - help - The Synopsis DWC controller is a dual-role - host/peripheral/OTG ("On The Go") USB controllers. - -config ADK_WALDUX_KERNEL_USB_CHIPIDEA_UDC - bool - -config ADK_WALDUX_KERNEL_USB_CHIPIDEA_HOST - bool - -config ADK_WALDUX_KERNEL_USB_CHIPIDEA - tristate "Support for ChipIdea controller" - select ADK_WALDUX_KERNEL_USB_CHIPIDEA_UDC - select ADK_WALDUX_KERNEL_USB_CHIPIDEA_HOST - select ADK_WALDUX_KERNEL_USB_GADGET - depends on ADK_WALDUX_KERNEL_USB_EHCI_HCD - depends on ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default n - -config ADK_WALDUX_KERNEL_USB_ISP116X_HCD - tristate "Support for ISP116X" - depends on ADK_WALDUX_KERNEL_USB - depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 - depends on !ADK_TARGET_BOARD_BCM28XX - help - The ISP1160 and ISP1161 chips are USB host controllers. Enable this - option if your board has this chip. If unsure, say N. - - This driver does not support isochronous transfers. - -config ADK_WALDUX_KERNEL_USB_SL811_HCD - tristate "Support for SL811HS" - depends on ADK_WALDUX_KERNEL_USB - depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 - depends on !ADK_TARGET_BOARD_BCM28XX - default n - help - The SL811HS is a single-port USB controller that supports either - host side or peripheral side roles. Enable this option if your - board has this chip, and you want to use it as a host controller. - If unsure, say N. - -endmenu - -menu "USB devices support" - -config ADK_WALDUX_KERNEL_USB_STORAGE - tristate "Support for USB storage devices" - select ADK_WALDUX_KERNEL_SCSI - select ADK_WALDUX_KERNEL_BLK_DEV_SD - -config ADK_WALDUX_KERNEL_SND_USB_AUDIO - tristate "Support for USB sound adapter" - select ADK_WALDUX_KERNEL_SND - select ADK_WALDUX_KERNEL_SND_USB - select ADK_WALDUX_KERNEL_SND_RAWMIDI - -config ADK_WALDUX_KERNEL_USB_HSO - tristate "Support for USB HSO devices" - select ADK_WALDUX_KERNEL_RFKILL - select ADK_WALDUX_KERNEL_USB_STORAGE - -config ADK_WALDUX_KERNEL_USB_PRINTER - tristate "Support for USB printers" - -config ADK_WALDUX_KERNEL_USB_ACM - tristate "Support for USB modems/isdn controllers" - -config ADK_WALDUX_KERNEL_USB_PEGASUS - tristate "Support for USB Pegasus network cards" - select ADK_WALDUX_KERNEL_USB_NET_DRIVERS - -config ADK_WALDUX_KERNEL_USB_SERIAL - tristate "Support for USB-to-serial converters" - help - Say Y here if you have a USB device that provides normal serial - ports, or acts like a serial device, and you want to connect it to - your USB bus. - - Please read for more - information on the specifics of the different devices that are - supported, and on how to use them. - -config ADK_WALDUX_KERNEL_USB_SERIAL_BELKIN - tristate "Support for Belkin USB-to-serial converters" - depends on ADK_WALDUX_KERNEL_USB_SERIAL - help - Say Y here if you want to use a Belkin USB Serial single port - adaptor (F5U103 is one of the model numbers) or the Peracom single - port USB to serial adapter. - -config ADK_WALDUX_KERNEL_USB_SERIAL_FTDI_SIO - tristate "Support for FTDI USB-to-serial converter" - depends on ADK_WALDUX_KERNEL_USB_SERIAL - help - Say Y here if you want to use a FTDI SIO single port USB to serial - converter device. The implementation I have is called the USC-1000. - This driver has also be tested with the 245 and 232 devices. - - See for more - information on this driver and the device. - -config ADK_WALDUX_KERNEL_USB_SERIAL_MCT_U232 - tristate "Support for Magic Control Technology USB-to-Serial converters" - depends on ADK_WALDUX_KERNEL_USB_SERIAL - help - Say Y here if you want to use a USB Serial single port adapter from - Magic Control Technology Corp. (U232 is one of the model numbers). - - This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB - BAY, Belkin F5U109, and Belkin F5U409 devices. - -config ADK_WALDUX_KERNEL_USB_SERIAL_PL2303 - tristate "Support for Prolific PL2303 USB-to-Serial converters" - depends on ADK_WALDUX_KERNEL_USB_SERIAL - help - Say Y here if you want to use the PL2303 USB Serial single port - adapter from Prolific. - -config ADK_WALDUX_KERNEL_USB_SERIAL_VISOR - tristate "Support for Handspring Visor / Palm m50x / Sony Clie Driver" - depends on ADK_WALDUX_KERNEL_USB_SERIAL - help - Say Y here if you want to connect to your HandSpring Visor, Palm - m500 or m505 through its USB docking station. See - for more information on using this - driver. - -config ADK_WALDUX_KERNEL_USB_SERIAL_SIERRAWIRELESS - tristate "Support for Sierra Wireless USB-to-Serial converters" - depends on ADK_WALDUX_KERNEL_USB_SERIAL - -config ADK_WALDUX_KERNEL_USB_SERIAL_OPTION - tristate "USB driver for GSM and CDMA modems" - depends on ADK_WALDUX_KERNEL_USB_SERIAL - help - Say Y here if you have a GSM or CDMA modem that's connected to USB. - -config ADK_WALDUX_KERNEL_USB_SERIAL_WWAN - tristate - depends on ADK_WALDUX_KERNEL_USB_SERIAL - -config ADK_WALDUX_KERNEL_USB_ATM - tristate "Support for USB ATM devices" - -config ADK_WALDUX_KERNEL_USB_ATM_SPEEDTOUCH - tristate "Support for USB Speedtouch ADSL modem" - depends on ADK_WALDUX_KERNEL_USB_ATM - -config ADK_WALDUX_KERNEL_USB_SISUSBVGA - tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)" - -config ADK_WALDUX_KERNEL_USB_NET_QMI_WWAN - tristate "Qualcomm LTE modems" - select ADK_WALDUX_KERNEL_USB_USBNET - help - -config ADK_WALDUX_KERNEL_USB_SIERRA_NET - tristate "Sierra Wireless MC8775 PCI Express" - select ADK_WALDUX_KERNEL_USB_USBNET - help - Driver for WWAN modem Sierra Wireless MC8775 PCI Express - - -config ADK_WALDUX_KERNEL_SND_USB - bool - depends on ADK_WALDUX_KERNEL_USB - -config ADK_WALDUX_KERNEL_SND_USB_AUDIO - tristate - -config ADK_WALDUX_KERNEL_USB_GADGET - tristate - -config ADK_WALDUX_KERNEL_USB_AUDIO - tristate - -config ADK_WALDUX_KERNEL_USB_MIDI_GADGET - tristate "USB Midi Gadgets" - select ADK_WALDUX_KERNEL_USB_GADGET - select ADK_WALDUX_KERNEL_USB_AUDIO - select ADK_WALDUX_KERNEL_SND_USB_AUDIO - select ADK_WALDUX_KERNEL_SND_USB - help - Enable USB midi devices - -endmenu -endmenu -- cgit v1.2.3