From 021fd36e08840ebf9981d483cc8cac3cbb6217de Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Sun, 18 May 2014 13:42:02 +0200 Subject: convert mips to use new targethelp make target, useful to just show the help text after building --- target/mips/Makefile | 194 +++++++++++++++++++++++++++------------------------ 1 file changed, 102 insertions(+), 92 deletions(-) (limited to 'target/mips/Makefile') diff --git a/target/mips/Makefile b/target/mips/Makefile index 9029af155..06a0a84a2 100644 --- a/target/mips/Makefile +++ b/target/mips/Makefile @@ -8,9 +8,94 @@ include $(TOPDIR)/mk/kernel-build.mk include $(TOPDIR)/mk/image.mk KERNEL:=$(LINUX_DIR)/$(ADK_TARGET_KERNEL) - OSTRIP:=-R .reginfo -R .notes -R .note -R .comment -R .mdebug -R .note.gnu.build-id +# target helper text +ifeq ($(ADK_TARGET_FS),nfsroot) +targethelp: + @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}' + @echo 'The nfs root tarball is: ${FW_DIR}/${ROOTFSUSERTARBALL}' +ifeq ($(ADK_TARGET_SYSTEM_FON_FON2100),y) + @echo 'Type the following in Redboot:' + @echo 'RedBoot> load $(TARGET_KERNEL)' + @echo 'RedBoot> go' +endif +ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y) + @echo 'Boot your Lemote Yeelong and type following commands in PMON:' + @echo 'PMON> ifaddr rtl0 ' + @echo 'PMON> load tftp:///${TARGET_KERNEL}' + @echo 'PMON> g' +endif +endif +ifeq ($(ADK_TARGET_FS),yaffs) +targethelp: + @echo 'The root tarball is: ${FW_DIR}/${ROOTFSTARBALL}' + @echo 'Format your NAND with Routerboot, boot via NFS and' + @echo 'then install kernel and filesystem via:' + @echo 'adkinstall ${ROOTFSTARBALL}' +endif +ifeq ($(ADK_TARGET_FS),usb) +targethelp: + @echo 'The root tarball is: ${FW_DIR}/${ROOTFSTARBALL}' +ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y) + @echo "Startup the netbook and type del to enter PMON:" + @echo "PMON> load /dev/fs/ext2@usb0/boot/kernel" + @echo "PMON> g" +endif +endif +ifeq ($(ADK_TARGET_FS),archive) +targethelp: + @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)" +ifeq ($(ADK_HARDWARE_QEMU),y) + @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}' + @echo "Use following command to create a QEMU Image:" + @echo "./scripts/create.sh qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)" + @echo "Start qemu with following options:" + @echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img' +endif +ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y) + @echo "Startup the Lemote Yeelong and type del to enter PMON:" + @echo "PMON> load /dev/fs/ext2@wd0a/boot/kernel" + @echo "PMON> g root=/dev/sda1" +endif +ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB532),y) + @echo "Use following command to install it on CF card:" + @echo "sudo ./scripts/install-rb532.sh /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)" +endif +endif +ifeq ($(ADK_TARGET_FS),initramfsarchive) +targethelp: + @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}' + @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSUSERTARBALL)" +endif +ifeq ($(ADK_TARGET_FS),initramfs) +targethelp: + @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}' + @echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}' +ifeq ($(ADK_HARDWARE_QEMU),y) + @echo "Start qemu with following command line:" + @echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0 -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}' +endif +endif +ifeq ($(ADK_TARGET_FS),initramfs-piggyback) +targethelp: + @echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}' +ifeq ($(ADK_HARDWARE_QEMU),y) + @echo "Start qemu with following command line:" + @echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0 -kernel $(FW_DIR)/$(TARGET_KERNEL)' +endif +endif +ifeq ($(ADK_TARGET_FS),squashfs) +targethelp: +ifeq ($(ADK_TARGET_SYSTEM_BROADCOM_BCM47XX),y) + @echo 'You can flash the image via tftp:' + @echo 'tftp 192.168.1.1' + @echo 'tftp> binary' + @echo "tftp> put $(ROOTFSSQUASHFS) upgrade_code.bin" +endif +endif + +# image creation and kernel install ifeq ($(ADK_TARGET_SYSTEM_BROADCOM_BCM47XX),y) kernel-install: ${TARGET_CROSS}objcopy ${OSTRIP} -S ${LINUX_DIR}/vmlinuz.elf \ @@ -29,7 +114,6 @@ else cp $@~ $@ endif endif - ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_AG241),y) kernel-install: ${TARGET_CROSS}objcopy -S -O srec $(KERNEL) $(LINUX_DIR)/vmlinux.srec @@ -38,18 +122,20 @@ kernel-install: PATH='${TARGET_PATH}' addpattern -p AG3B -b -r 2.0 -i $(LINUX_DIR)/vmlinux.tmp \ -o $(BUILD_DIR)/$(TARGET_KERNEL) 2>/dev/null endif - ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB532),y) kernel-install: $(TARGET_CROSS)objcopy $(OSTRIP) -S $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) + @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/${TARGET_KERNEL} endif ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB4XX),y) kernel-install: $(TARGET_CROSS)objcopy $(OSTRIP) -S $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) + @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/${TARGET_KERNEL} endif ifeq ($(ADK_TARGET_SYSTEM_FON_FON2100),y) kernel-install: $(TARGET_CROSS)objcopy $(OSTRIP) -S $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) + @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/${TARGET_KERNEL} ${BUILD_DIR}/${ROOTFSSQUASHFS}: ${BUILD_DIR}/root.squashfs $(TARGET_CROSS)objcopy $(OSTRIP) -S $(LINUX_DIR)/vmlinux $(BUILD_DIR)/vmlinux.strip @@ -60,120 +146,44 @@ endif ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y) kernel-install: $(TARGET_CROSS)objcopy $(OSTRIP) -S $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) + @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/${TARGET_KERNEL} endif -ifeq ($(ADK_TARGET_SYSTEM_QEMU_MIPS),y) -kernel-install: - $(TARGET_CROSS)objcopy $(OSTRIP) -S $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) -endif -ifeq ($(ADK_TARGET_SYSTEM_QEMU_MIPSEL),y) +ifeq ($(ADK_HARDWARE_QEMU),y) kernel-install: $(TARGET_CROSS)objcopy $(OSTRIP) -S $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) + @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/${TARGET_KERNEL} endif +# filesystem specific targets ifeq ($(ADK_TARGET_FS),nfsroot) -imageinstall: kernel-install $(FW_DIR)/$(ROOTFSUSERTARBALL) - @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/${TARGET_KERNEL} - @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}' - @echo 'The nfs root tarball is: ${FW_DIR}/${ROOTFSUSERTARBALL}' -ifeq ($(ADK_TARGET_SYSTEM_FON_FON2100),y) - @echo 'Type the following in Redboot:' - @echo 'RedBoot> load $(TARGET_KERNEL)' - @echo 'RedBoot> go' -endif -ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y) - @echo 'Boot your lemote and type following commands in PMON:' - @echo 'PMON> ifaddr rtl0 ' - @echo 'PMON> load tftp:///${TARGET_KERNEL}' - @echo 'PMON> g' -endif +imageinstall: kernel-install $(FW_DIR)/$(ROOTFSUSERTARBALL) targethelp endif ifeq ($(ADK_TARGET_FS),yaffs) -imageinstall: kernel-install $(FW_DIR)/$(ROOTFSTARBALL) - @echo 'The root tarball is: ${FW_DIR}/${ROOTFSTARBALL}' - @echo 'Format your NAND with Routerboot, boot via NFS and' - @echo 'then install kernel and filesystem via:' - @echo 'adkinstall ${ROOTFSTARBALL}' +imageinstall: $(FW_DIR)/$(ROOTFSTARBALL) targethelp endif ifeq ($(ADK_TARGET_FS),archive) -imageinstall: $(FW_DIR)/$(ROOTFSTARBALL) - @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)" -ifneq ($(ADK_HARDWARE_QEMU),) - @cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL) - @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}' - @echo "Use following command to create a QEMU Image:" - @echo "./scripts/create.sh qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)" - @echo "Start qemu with following options:" - @echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img' -endif -ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y) - @echo "Startup the netbook and type del to enter PMON:" - @echo "PMON> load /dev/fs/ext2@wd0a/boot/kernel" - @echo "PMON> g root=/dev/sda1" - @echo "The root parameter have to be changed." -endif -ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB532),y) - @cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL) - @echo "Use following command to install it on CF card:" - @echo "sudo ./scripts/install-rb532.sh /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL) $(FW_DIR)/$(TARGET_KERNEL)" -endif +imageinstall: $(FW_DIR)/$(ROOTFSTARBALL) targethelp endif ifeq ($(ADK_TARGET_FS),initramfsarchive) -imageinstall: $(FW_DIR)/$(ROOTFSUSERTARBALL) - @cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL) - @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}' - @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSUSERTARBALL)" +imageinstall: kernel-install $(FW_DIR)/$(ROOTFSUSERTARBALL) targethelp endif ifeq ($(ADK_TARGET_FS),initramfs) -imageinstall: $(FW_DIR)/$(INITRAMFS) - @cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL) - @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}' - @echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}' -ifneq ($(ADK_HARDWARE_QEMU),) - @echo "Start qemu with following command line:" - @echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0 -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}' -endif +imageinstall: kernel-install $(FW_DIR)/$(INITRAMFS) targethelp endif ifeq ($(ADK_TARGET_FS),initramfs-piggyback) -imageinstall: createinitramfs +imageinstall: createinitramfs targethelp @cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL) - @echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}' -ifneq ($(ADK_HARDWARE_QEMU),) - @echo "Start qemu with following command line:" - @echo 'qemu-system-${CPU_ARCH} -nographic -M malta -device e1000,netdev=adk0 -netdev user,id=adk0 -kernel $(FW_DIR)/$(TARGET_KERNEL)' -endif endif ifeq ($(ADK_TARGET_FS),usb) -imageinstall: $(FW_DIR)/$(ROOTFSTARBALL) - @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)" -ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y) - @echo "Startup the netbook and type del to enter PMON:" - @echo "PMON> load /dev/fs/ext2@usb0/boot/kernel" - @echo "PMON> g" -endif -endif -ifeq ($(ADK_TARGET_FS),cf) -imageinstall: kernel-install $(FW_DIR)/$(ROOTFSUSERTARBALL) - @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/$(TARGET_KERNEL) - @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}' - @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSUSERTARBALL)" - @echo "Boot the board via network (tftp+nfsroot) and use adkinstall." - @echo "If you just want to update, use adkupdate." +imageinstall: $(FW_DIR)/$(ROOTFSTARBALL) targethelp endif ifeq ($(ADK_TARGET_FS),squashfs) -imageinstall: kernel-install ${BUILD_DIR}/${ROOTFSSQUASHFS} +imageinstall: kernel-install ${BUILD_DIR}/${ROOTFSSQUASHFS} targethelp @if [ $$($(STATCMD) ${BUILD_DIR}/${ROOTFSSQUASHFS}) -gt 3801088 ];then \ echo 'Image is too big!'; \ else \ ${CP} ${BUILD_DIR}/${ROOTFSSQUASHFS} ${FW_DIR}/${ROOTFSSQUASHFS}; \ echo The image file is $(ROOTFSSQUASHFS); \ fi -ifeq ($(ADK_TARGET_SYSTEM_FON_FON2100),y) - @echo The kernel file is $(TARGET_KERNEL) -endif -ifeq ($(ADK_TARGET_SYSTEM_BROADCOM_BCM47XX),y) - @echo 'You can flash the image via tftp:' - @echo 'tftp 192.168.1.1' - @echo 'tftp> binary' - @echo "tftp> put $(ROOTFSSQUASHFS) upgrade_code.bin" -endif endif + -- cgit v1.2.3