From b9a522b762ad9ed32f2e082fc04126ce6f5ba5ae Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Sun, 12 Nov 2017 08:02:13 +0100 Subject: linux: forgot to move 4.4.x patch directory after bump --- .../patches/4.1.35/crisv32_ethernet_driver.patch | 4094 -------------------- 1 file changed, 4094 deletions(-) delete mode 100644 target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch (limited to 'target/cris') diff --git a/target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch b/target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch deleted file mode 100644 index cd098665e..000000000 --- a/target/cris/qemu-cris/patches/4.1.35/crisv32_ethernet_driver.patch +++ /dev/null @@ -1,4094 +0,0 @@ -diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig -index e6c523c..5737a5b 100644 ---- a/arch/cris/arch-v32/drivers/Kconfig -+++ b/arch/cris/arch-v32/drivers/Kconfig -@@ -8,9 +8,18 @@ config ETRAX_ETHERNET - This option enables the ETRAX FS built-in 10/100Mbit Ethernet - controller. - -+config ETRAX_HAVE_PHY -+ bool "PHY present" -+ default y -+ help -+ Search and use the first PHY available on the MDIO bus. Fail -+ if none is found. Say Y here if you are not in a switched -+ environment (single port device). -+ - config ETRAX_NO_PHY - bool "PHY not present" - depends on ETRAX_ETHERNET -+ default n - help - This option disables all MDIO communication with an ethernet - transceiver connected to the MII interface. This option shall -@@ -18,6 +27,70 @@ config ETRAX_NO_PHY - switch. This option should normally be disabled. If enabled, - speed and duplex will be locked to 100 Mbit and full duplex. - -+config ETRAX_PHY_FALLBACK -+ bool "Fixed PHY fallback" -+ depends on ETRAX_ETHERNET -+ default n -+ help -+ If no PHY is found on the MDIO bus, fall back on a fixed -+ 100/Full fixed PHY. Say Y here if you need dynamic PHY -+ presence detection (switch connection where some but not -+ all ports have integrated PHYs), otherwise say N. -+ -+config ETRAX_ETHERNET_IFACE0 -+ depends on ETRAX_ETHERNET -+ bool "Enable network interface 0" -+ -+config ETRAX_ETHERNET_IFACE1 -+ depends on (ETRAX_ETHERNET && ETRAXFS) -+ bool "Enable network interface 1 (uses DMA6 and DMA7)" -+ -+choice -+ prompt "Eth0 led group" -+ depends on ETRAX_ETHERNET_IFACE0 -+ default ETRAX_ETH0_USE_LEDGRP0 -+ -+config ETRAX_ETH0_USE_LEDGRP0 -+ bool "Use LED grp 0" -+ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO -+ help -+ Use LED grp 0 for eth0 -+ -+config ETRAX_ETH0_USE_LEDGRP1 -+ bool "Use LED grp 1" -+ depends on ETRAX_NBR_LED_GRP_TWO -+ help -+ Use LED grp 1 for eth0 -+ -+config ETRAX_ETH0_USE_LEDGRPNULL -+ bool "Use no LEDs for eth0" -+ help -+ Use no LEDs for eth0 -+endchoice -+ -+choice -+ prompt "Eth1 led group" -+ depends on ETRAX_ETHERNET_IFACE1 -+ default ETRAX_ETH1_USE_LEDGRP1 -+ -+config ETRAX_ETH1_USE_LEDGRP0 -+ bool "Use LED grp 0" -+ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO -+ help -+ Use LED grp 0 for eth1 -+ -+config ETRAX_ETH1_USE_LEDGRP1 -+ bool "Use LED grp 1" -+ depends on ETRAX_NBR_LED_GRP_TWO -+ help -+ Use LED grp 1 for eth1 -+ -+config ETRAX_ETH1_USE_LEDGRPNULL -+ bool "Use no LEDs for eth1" -+ help -+ Use no LEDs for eth1 -+endchoice -+ - config ETRAXFS_SERIAL - bool "Serial-port support" - depends on ETRAX_ARCH_V32 -diff --git a/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h b/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h -index 90fe8a2..37bec9a 100644 ---- a/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h -+++ b/arch/cris/include/arch-v32/arch/hwregs/eth_defs.h -@@ -2,69 +2,64 @@ - #define __eth_defs_h - - /* -- * This file is autogenerated from -- * file: eth.r -- * id: eth_regs.r,v 1.16 2005/05/20 15:41:22 perz Exp -- * last modfied: Mon Jan 9 06:06:41 2006 -- * -- * by /n/asic/design/tools/rdesc/rdes2c eth.r -- * id: $Id: eth_defs.h,v 1.7 2006/01/26 13:45:30 karljope Exp $ -- * Any changes here will be lost. -- * -- * -*- buffer-read-only: t -*- -+ * Note: Previously this was autogenerated code from the hardware -+ * implementation. However, to enable the same file to be used -+ * for both ARTPEC-3 and ETRAX FS this file is now hand-edited. -+ * Be careful. - */ -+ - /* Main access macros */ - #ifndef REG_RD - #define REG_RD( scope, inst, reg ) \ -- REG_READ( reg_##scope##_##reg, \ -- (inst) + REG_RD_ADDR_##scope##_##reg ) -+ REG_READ( reg_##scope##_##reg, \ -+ (inst) + REG_RD_ADDR_##scope##_##reg ) - #endif - - #ifndef REG_WR - #define REG_WR( scope, inst, reg, val ) \ -- REG_WRITE( reg_##scope##_##reg, \ -- (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -+ REG_WRITE( reg_##scope##_##reg, \ -+ (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) - #endif - - #ifndef REG_RD_VECT - #define REG_RD_VECT( scope, inst, reg, index ) \ -- REG_READ( reg_##scope##_##reg, \ -- (inst) + REG_RD_ADDR_##scope##_##reg + \ -- (index) * STRIDE_##scope##_##reg ) -+ REG_READ( reg_##scope##_##reg, \ -+ (inst) + REG_RD_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg ) - #endif - - #ifndef REG_WR_VECT - #define REG_WR_VECT( scope, inst, reg, index, val ) \ -- REG_WRITE( reg_##scope##_##reg, \ -- (inst) + REG_WR_ADDR_##scope##_##reg + \ -- (index) * STRIDE_##scope##_##reg, (val) ) -+ REG_WRITE( reg_##scope##_##reg, \ -+ (inst) + REG_WR_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg, (val) ) - #endif - - #ifndef REG_RD_INT - #define REG_RD_INT( scope, inst, reg ) \ -- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) -+ REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) - #endif - - #ifndef REG_WR_INT - #define REG_WR_INT( scope, inst, reg, val ) \ -- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) -+ REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) - #endif - - #ifndef REG_RD_INT_VECT - #define REG_RD_INT_VECT( scope, inst, reg, index ) \ -- REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ -- (index) * STRIDE_##scope##_##reg ) -+ REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg ) - #endif - - #ifndef REG_WR_INT_VECT - #define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ -- REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ -- (index) * STRIDE_##scope##_##reg, (val) ) -+ REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg, (val) ) - #endif - - #ifndef REG_TYPE_CONV - #define REG_TYPE_CONV( type, orgtype, val ) \ -- ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) -+ ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) - #endif - - #ifndef reg_page_size -@@ -73,306 +68,332 @@ - - #ifndef REG_ADDR - #define REG_ADDR( scope, inst, reg ) \ -- ( (inst) + REG_RD_ADDR_##scope##_##reg ) -+ ( (inst) + REG_RD_ADDR_##scope##_##reg ) - #endif - - #ifndef REG_ADDR_VECT - #define REG_ADDR_VECT( scope, inst, reg, index ) \ -- ( (inst) + REG_RD_ADDR_##scope##_##reg + \ -- (index) * STRIDE_##scope##_##reg ) -+ ( (inst) + REG_RD_ADDR_##scope##_##reg + \ -+ (index) * STRIDE_##scope##_##reg ) - #endif - - /* C-code for register scope eth */ - - /* Register rw_ma0_lo, scope eth, type rw */ - typedef struct { -- unsigned int addr : 32; -+ unsigned int addr : 32; - } reg_eth_rw_ma0_lo; - #define REG_RD_ADDR_eth_rw_ma0_lo 0 - #define REG_WR_ADDR_eth_rw_ma0_lo 0 - - /* Register rw_ma0_hi, scope eth, type rw */ - typedef struct { -- unsigned int addr : 16; -- unsigned int dummy1 : 16; -+ unsigned int addr : 16; -+ unsigned int dummy1 : 16; - } reg_eth_rw_ma0_hi; - #define REG_RD_ADDR_eth_rw_ma0_hi 4 - #define REG_WR_ADDR_eth_rw_ma0_hi 4 - - /* Register rw_ma1_lo, scope eth, type rw */ - typedef struct { -- unsigned int addr : 32; -+ unsigned int addr : 32; - } reg_eth_rw_ma1_lo; - #define REG_RD_ADDR_eth_rw_ma1_lo 8 - #define REG_WR_ADDR_eth_rw_ma1_lo 8 - - /* Register rw_ma1_hi, scope eth, type rw */ - typedef struct { -- unsigned int addr : 16; -- unsigned int dummy1 : 16; -+ unsigned int addr : 16; -+ unsigned int dummy1 : 16; - } reg_eth_rw_ma1_hi; - #define REG_RD_ADDR_eth_rw_ma1_hi 12 - #define REG_WR_ADDR_eth_rw_ma1_hi 12 - - /* Register rw_ga_lo, scope eth, type rw */ - typedef struct { -- unsigned int tbl : 32; -+ unsigned int table : 32; - } reg_eth_rw_ga_lo; - #define REG_RD_ADDR_eth_rw_ga_lo 16 - #define REG_WR_ADDR_eth_rw_ga_lo 16 - - /* Register rw_ga_hi, scope eth, type rw */ - typedef struct { -- unsigned int tbl : 32; -+ unsigned int table : 32; - } reg_eth_rw_ga_hi; - #define REG_RD_ADDR_eth_rw_ga_hi 20 - #define REG_WR_ADDR_eth_rw_ga_hi 20 - - /* Register rw_gen_ctrl, scope eth, type rw */ - typedef struct { -- unsigned int en : 1; -- unsigned int phy : 2; -- unsigned int protocol : 1; -- unsigned int loopback : 1; -- unsigned int flow_ctrl : 1; -- unsigned int gtxclk_out : 1; -- unsigned int phyrst_n : 1; -- unsigned int dummy1 : 24; -+ unsigned int en : 1; -+ unsigned int phy : 2; -+ unsigned int protocol : 1; -+ unsigned int loopback : 1; -+ unsigned int flow_ctrl : 1; -+ unsigned int gtxclk_out : 1; -+ unsigned int phyrst_n : 1; -+ unsigned int dummy1 : 24; - } reg_eth_rw_gen_ctrl; - #define REG_RD_ADDR_eth_rw_gen_ctrl 24 - #define REG_WR_ADDR_eth_rw_gen_ctrl 24 - - /* Register rw_rec_ctrl, scope eth, type rw */ - typedef struct { -- unsigned int ma0 : 1; -- unsigned int ma1 : 1; -- unsigned int individual : 1; -- unsigned int broadcast : 1; -- unsigned int undersize : 1; -- unsigned int oversize : 1; -- unsigned int bad_crc : 1; -- unsigned int duplex : 1; -- unsigned int max_size : 16; -- unsigned int dummy1 : 8; -+ unsigned int ma0 : 1; -+ unsigned int ma1 : 1; -+ unsigned int individual : 1; -+ unsigned int broadcast : 1; -+ unsigned int undersize : 1; -+ unsigned int oversize : 1; -+ unsigned int bad_crc : 1; -+ unsigned int duplex : 1; -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ unsigned int max_size : 16; -+ unsigned int dummy1 : 8; -+#else -+ unsigned int max_size : 1; -+ unsigned int dummy1 : 23; -+#endif - } reg_eth_rw_rec_ctrl; - #define REG_RD_ADDR_eth_rw_rec_ctrl 28 - #define REG_WR_ADDR_eth_rw_rec_ctrl 28 - - /* Register rw_tr_ctrl, scope eth, type rw */ - typedef struct { -- unsigned int crc : 1; -- unsigned int pad : 1; -- unsigned int retry : 1; -- unsigned int ignore_col : 1; -- unsigned int cancel : 1; -- unsigned int hsh_delay : 1; -- unsigned int ignore_crs : 1; -- unsigned int carrier_ext : 1; -- unsigned int dummy1 : 24; -+ unsigned int crc : 1; -+ unsigned int pad : 1; -+ unsigned int retry : 1; -+ unsigned int ignore_col : 1; -+ unsigned int cancel : 1; -+ unsigned int hsh_delay : 1; -+ unsigned int ignore_crs : 1; -+ unsigned int carrier_ext : 1; -+ unsigned int dummy1 : 24; - } reg_eth_rw_tr_ctrl; - #define REG_RD_ADDR_eth_rw_tr_ctrl 32 - #define REG_WR_ADDR_eth_rw_tr_ctrl 32 - - /* Register rw_clr_err, scope eth, type rw */ - typedef struct { -- unsigned int clr : 1; -- unsigned int dummy1 : 31; -+ unsigned int clr : 1; -+ unsigned int dummy1 : 31; - } reg_eth_rw_clr_err; - #define REG_RD_ADDR_eth_rw_clr_err 36 - #define REG_WR_ADDR_eth_rw_clr_err 36 - - /* Register rw_mgm_ctrl, scope eth, type rw */ - typedef struct { -- unsigned int mdio : 1; -- unsigned int mdoe : 1; -- unsigned int mdc : 1; -- unsigned int dummy1 : 29; -+ unsigned int mdio : 1; -+ unsigned int mdoe : 1; -+ unsigned int mdc : 1; -+ unsigned int phyclk : 1; -+ unsigned int txdata : 4; -+ unsigned int txen : 1; -+ unsigned int dummy1 : 23; - } reg_eth_rw_mgm_ctrl; - #define REG_RD_ADDR_eth_rw_mgm_ctrl 40 - #define REG_WR_ADDR_eth_rw_mgm_ctrl 40 - - /* Register r_stat, scope eth, type r */ - typedef struct { -- unsigned int mdio : 1; -- unsigned int exc_col : 1; -- unsigned int urun : 1; -- unsigned int clk_125 : 1; -- unsigned int dummy1 : 28; -+ unsigned int mdio : 1; -+ unsigned int exc_col : 1; -+ unsigned int urun : 1; -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ unsigned int clk_125 : 1; -+#else -+ unsigned int phyclk : 1; -+#endif -+ unsigned int txdata : 4; -+ unsigned int txen : 1; -+ unsigned int col : 1; -+ unsigned int crs : 1; -+ unsigned int txclk : 1; -+ unsigned int rxdata : 4; -+ unsigned int rxer : 1; -+ unsigned int rxdv : 1; -+ unsigned int rxclk : 1; -+ unsigned int dummy1 : 13; - } reg_eth_r_stat; - #define REG_RD_ADDR_eth_r_stat 44 - - /* Register rs_rec_cnt, scope eth, type rs */ - typedef struct { -- unsigned int crc_err : 8; -- unsigned int align_err : 8; -- unsigned int oversize : 8; -- unsigned int congestion : 8; -+ unsigned int crc_err : 8; -+ unsigned int align_err : 8; -+ unsigned int oversize : 8; -+ unsigned int congestion : 8; - } reg_eth_rs_rec_cnt; - #define REG_RD_ADDR_eth_rs_rec_cnt 48 - - /* Register r_rec_cnt, scope eth, type r */ - typedef struct { -- unsigned int crc_err : 8; -- unsigned int align_err : 8; -- unsigned int oversize : 8; -- unsigned int congestion : 8; -+ unsigned int crc_err : 8; -+ unsigned int align_err : 8; -+ unsigned int oversize : 8; -+ unsigned int congestion : 8; - } reg_eth_r_rec_cnt; - #define REG_RD_ADDR_eth_r_rec_cnt 52 - - /* Register rs_tr_cnt, scope eth, type rs */ - typedef struct { -- unsigned int single_col : 8; -- unsigned int mult_col : 8; -- unsigned int late_col : 8; -- unsigned int deferred : 8; -+ unsigned int single_col : 8; -+ unsigned int mult_col : 8; -+ unsigned int late_col : 8; -+ unsigned int deferred : 8; - } reg_eth_rs_tr_cnt; - #define REG_RD_ADDR_eth_rs_tr_cnt 56 - - /* Register r_tr_cnt, scope eth, type r */ - typedef struct { -- unsigned int single_col : 8; -- unsigned int mult_col : 8; -- unsigned int late_col : 8; -- unsigned int deferred : 8; -+ unsigned int single_col : 8; -+ unsigned int mult_col : 8; -+ unsigned int late_col : 8; -+ unsigned int deferred : 8; - } reg_eth_r_tr_cnt; - #define REG_RD_ADDR_eth_r_tr_cnt 60 - - /* Register rs_phy_cnt, scope eth, type rs */ - typedef struct { -- unsigned int carrier_loss : 8; -- unsigned int sqe_err : 8; -- unsigned int dummy1 : 16; -+ unsigned int carrier_loss : 8; -+ unsigned int sqe_err : 8; -+ unsigned int dummy1 : 16; - } reg_eth_rs_phy_cnt; - #define REG_RD_ADDR_eth_rs_phy_cnt 64 - - /* Register r_phy_cnt, scope eth, type r */ - typedef struct { -- unsigned int carrier_loss : 8; -- unsigned int sqe_err : 8; -- unsigned int dummy1 : 16; -+ unsigned int carrier_loss : 8; -+ unsigned int sqe_err : 8; -+ unsigned int dummy1 : 16; - } reg_eth_r_phy_cnt; - #define REG_RD_ADDR_eth_r_phy_cnt 68 - - /* Register rw_test_ctrl, scope eth, type rw */ - typedef struct { -- unsigned int snmp_inc : 1; -- unsigned int snmp : 1; -- unsigned int backoff : 1; -- unsigned int dummy1 : 29; -+ unsigned int snmp_inc : 1; -+ unsigned int snmp : 1; -+ unsigned int backoff : 1; -+ unsigned int dummy1 : 29; - } reg_eth_rw_test_ctrl; - #define REG_RD_ADDR_eth_rw_test_ctrl 72 - #define REG_WR_ADDR_eth_rw_test_ctrl 72 - - /* Register rw_intr_mask, scope eth, type rw */ - typedef struct { -- unsigned int crc : 1; -- unsigned int align : 1; -- unsigned int oversize : 1; -- unsigned int congestion : 1; -- unsigned int single_col : 1; -- unsigned int mult_col : 1; -- unsigned int late_col : 1; -- unsigned int deferred : 1; -- unsigned int carrier_loss : 1; -- unsigned int sqe_test_err : 1; -- unsigned int orun : 1; -- unsigned int urun : 1; -- unsigned int exc_col : 1; -- unsigned int mdio : 1; -- unsigned int dummy1 : 18; -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; - } reg_eth_rw_intr_mask; - #define REG_RD_ADDR_eth_rw_intr_mask 76 - #define REG_WR_ADDR_eth_rw_intr_mask 76 - - /* Register rw_ack_intr, scope eth, type rw */ - typedef struct { -- unsigned int crc : 1; -- unsigned int align : 1; -- unsigned int oversize : 1; -- unsigned int congestion : 1; -- unsigned int single_col : 1; -- unsigned int mult_col : 1; -- unsigned int late_col : 1; -- unsigned int deferred : 1; -- unsigned int carrier_loss : 1; -- unsigned int sqe_test_err : 1; -- unsigned int orun : 1; -- unsigned int urun : 1; -- unsigned int exc_col : 1; -- unsigned int mdio : 1; -- unsigned int dummy1 : 18; -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; - } reg_eth_rw_ack_intr; - #define REG_RD_ADDR_eth_rw_ack_intr 80 - #define REG_WR_ADDR_eth_rw_ack_intr 80 - - /* Register r_intr, scope eth, type r */ - typedef struct { -- unsigned int crc : 1; -- unsigned int align : 1; -- unsigned int oversize : 1; -- unsigned int congestion : 1; -- unsigned int single_col : 1; -- unsigned int mult_col : 1; -- unsigned int late_col : 1; -- unsigned int deferred : 1; -- unsigned int carrier_loss : 1; -- unsigned int sqe_test_err : 1; -- unsigned int orun : 1; -- unsigned int urun : 1; -- unsigned int exc_col : 1; -- unsigned int mdio : 1; -- unsigned int dummy1 : 18; -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; - } reg_eth_r_intr; - #define REG_RD_ADDR_eth_r_intr 84 - - /* Register r_masked_intr, scope eth, type r */ - typedef struct { -- unsigned int crc : 1; -- unsigned int align : 1; -- unsigned int oversize : 1; -- unsigned int congestion : 1; -- unsigned int single_col : 1; -- unsigned int mult_col : 1; -- unsigned int late_col : 1; -- unsigned int deferred : 1; -- unsigned int carrier_loss : 1; -- unsigned int sqe_test_err : 1; -- unsigned int orun : 1; -- unsigned int urun : 1; -- unsigned int exc_col : 1; -- unsigned int mdio : 1; -- unsigned int dummy1 : 18; -+ unsigned int crc : 1; -+ unsigned int align : 1; -+ unsigned int oversize : 1; -+ unsigned int congestion : 1; -+ unsigned int single_col : 1; -+ unsigned int mult_col : 1; -+ unsigned int late_col : 1; -+ unsigned int deferred : 1; -+ unsigned int carrier_loss : 1; -+ unsigned int sqe_test_err : 1; -+ unsigned int orun : 1; -+ unsigned int urun : 1; -+ unsigned int exc_col : 1; -+ unsigned int mdio : 1; -+ unsigned int dummy1 : 18; - } reg_eth_r_masked_intr; - #define REG_RD_ADDR_eth_r_masked_intr 88 - -- - /* Constants */ - enum { -- regk_eth_discard = 0x00000000, -- regk_eth_ether = 0x00000000, -- regk_eth_full = 0x00000001, -- regk_eth_gmii = 0x00000003, -- regk_eth_gtxclk = 0x00000001, -- regk_eth_half = 0x00000000, -- regk_eth_hsh = 0x00000001, -- regk_eth_mii = 0x00000001, -- regk_eth_mii_arec = 0x00000002, -- regk_eth_mii_clk = 0x00000000, -- regk_eth_no = 0x00000000, -- regk_eth_phyrst = 0x00000000, -- regk_eth_rec = 0x00000001, -- regk_eth_rw_ga_hi_default = 0x00000000, -- regk_eth_rw_ga_lo_default = 0x00000000, -- regk_eth_rw_gen_ctrl_default = 0x00000000, -- regk_eth_rw_intr_mask_default = 0x00000000, -- regk_eth_rw_ma0_hi_default = 0x00000000, -- regk_eth_rw_ma0_lo_default = 0x00000000, -- regk_eth_rw_ma1_hi_default = 0x00000000, -- regk_eth_rw_ma1_lo_default = 0x00000000, -- regk_eth_rw_mgm_ctrl_default = 0x00000000, -- regk_eth_rw_test_ctrl_default = 0x00000000, -- regk_eth_size1518 = 0x000005ee, -- regk_eth_size1522 = 0x000005f2, -- regk_eth_yes = 0x00000001 -+ regk_eth_discard = 0x00000000, -+ regk_eth_ether = 0x00000000, -+ regk_eth_full = 0x00000001, -+ regk_eth_gmii = 0x00000003, -+ regk_eth_gtxclk = 0x00000001, -+ regk_eth_half = 0x00000000, -+ regk_eth_hsh = 0x00000001, -+ regk_eth_mii = 0x00000001, -+ regk_eth_mii_arec = 0x00000002, -+ regk_eth_mii_clk = 0x00000000, -+ regk_eth_no = 0x00000000, -+ regk_eth_phyrst = 0x00000000, -+ regk_eth_rec = 0x00000001, -+ regk_eth_rw_ga_hi_default = 0x00000000, -+ regk_eth_rw_ga_lo_default = 0x00000000, -+ regk_eth_rw_gen_ctrl_default = 0x00000000, -+ regk_eth_rw_intr_mask_default = 0x00000000, -+ regk_eth_rw_ma0_hi_default = 0x00000000, -+ regk_eth_rw_ma0_lo_default = 0x00000000, -+ regk_eth_rw_ma1_hi_default = 0x00000000, -+ regk_eth_rw_ma1_lo_default = 0x00000000, -+ regk_eth_rw_mgm_ctrl_default = 0x00000000, -+ regk_eth_rw_test_ctrl_default = 0x00000000, -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ regk_eth_size1518 = 0x000005ee, -+ regk_eth_size1522 = 0x000005f2, -+#else -+ regk_eth_size1518 = 0x00000000, -+ regk_eth_size1522 = 0x00000001, -+#endif -+ regk_eth_yes = 0x00000001 - }; -+ - #endif /* __eth_defs_h */ -diff --git a/drivers/net/cris/Makefile b/drivers/net/cris/Makefile -index b4e8932..39b4d4d 100644 ---- a/drivers/net/cris/Makefile -+++ b/drivers/net/cris/Makefile -@@ -1 +1,2 @@ - obj-$(CONFIG_ETRAX_ARCH_V10) += eth_v10.o -+obj-$(CONFIG_ETRAX_ARCH_V32) += eth_v32.o -diff --git a/drivers/net/cris/eth_v32.c b/drivers/net/cris/eth_v32.c -new file mode 100644 -index 0000000..92c4cae ---- /dev/null -+++ b/drivers/net/cris/eth_v32.c -@@ -0,0 +1,3093 @@ -+/* -+ * Driver for the ETRAX FS/Artpec-3 network controller. -+ * -+ * Copyright (c) 2003-2008 Axis Communications AB. -+ * -+ * TODO: -+ * * Decrease the amount of code running with interrupts disabled. -+ * * Rework the error handling so that we do not need to touch the tx -+ * ring from the error interrupts. When done, we should be able to -+ * do tx completition from the NAPI loop without disabling interrupts. -+ * * Remove the gigabit code. It's probably never going to be used. -+ */ -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include /* CRIS_LED_* I/O functions */ -+#include -+#include -+#include -+#include -+#include -+#ifdef CONFIG_ETRAXFS -+#include -+#else -+#include -+#endif -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "eth_v32.h" -+ -+#ifndef CONFIG_ETRAXFS -+#define ETH0_INTR_VECT ETH_INTR_VECT -+#define ETH1_INTR_VECT ETH_INTR_VECT -+#define regi_eth0 regi_eth -+#define regi_eth1 regi_ -+#endif -+ -+#define DEBUG(x) -+#define GET_BIT(bit,val) (((val) >> (bit)) & 0x01) -+ -+#if defined(CONFIG_ETRAX_HAVE_PHY) || defined(CONFIG_ETRAX_PHY_FALLBACK) -+#define RESET_PHY 1 -+#else -+#define RESET_PHY 0 -+#endif -+ -+enum { -+ HAVE_PHY, -+ NO_PHY, -+ FALLBACK_PHY, -+}; -+#if defined(CONFIG_ETRAX_PHY_FALLBACK) -+#define PHY_MODE (FALLBACK_PHY) -+#elif defined(CONFIG_ETRAX_NO_PHY) -+#define PHY_MODE (NO_PHY) -+#elif defined(CONFIG_ETRAX_HAVE_PHY) -+#define PHY_MODE (HAVE_PHY) -+#else -+#error Unknown PHY behaviour -+#endif -+ -+static struct { -+ const char str[ETH_GSTRING_LEN]; -+} const ethtool_stats_keys[] = { -+ { "tx_dma_restarts" }, -+ { "tx_mac_resets" }, -+ { "rx_dma_restarts" }, -+ { "rx_dma_timeouts" }, -+ { " dropped_rx" } -+}; -+ -+static void crisv32_eth_check_speed(unsigned long idev); -+static void crisv32_eth_check_duplex(unsigned long idev); -+static void update_rx_stats(struct crisv32_ethernet_local *np); -+static void update_tx_stats(struct crisv32_ethernet_local *np); -+static int crisv32_eth_poll(struct napi_struct *napi, int budget); -+static void crisv32_eth_setup_controller(struct net_device *dev); -+static int crisv32_eth_request_irqdma(struct net_device *dev); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+static void -+crisv32_eth_restart_rx_dma(struct net_device* dev, -+ struct crisv32_ethernet_local *np); -+#endif -+#if 0 -+static void crisv32_ethernet_bug(struct net_device *dev); -+#endif -+ -+/* -+ * The name of the card. Is used for messages and in the requests for -+ * io regions, irqs and dma channels. -+ */ -+#ifdef CONFIG_ETRAXFS -+static const char cardname[] = "ETRAX FS built-in ethernet controller"; -+#else -+static const char cardname[] = "ARTPEC-3 built-in ethernet controller"; -+#endif -+ -+/* Some chipset needs special care. */ -+#ifndef CONFIG_ETRAX_NO_PHY -+struct transceiver_ops transceivers[] = { -+ {0x1018, broadcom_check_speed, broadcom_check_duplex}, -+ {0x50EF, broadcom_check_speed, broadcom_check_duplex}, -+ /* TDK 2120 and TDK 2120C */ -+ {0xC039, tdk_check_speed, tdk_check_duplex}, -+ {0x039C, tdk_check_speed, tdk_check_duplex}, -+ /* Intel LXT972A*/ -+ {0x04de, intel_check_speed, intel_check_duplex}, -+ /* National Semiconductor DP83865 */ -+ {0x0017, national_check_speed, national_check_duplex}, -+ /* Vitesse VCS8641 */ -+ {0x01c1, vitesse_check_speed, vitesse_check_duplex}, -+ /* Davicom DM9161 */ -+ {0x606E, davicom_check_speed, davicom_check_duplex}, -+ /* Generic, must be last. */ -+ {0x0000, generic_check_speed, generic_check_duplex} -+}; -+#endif -+ -+static struct net_device *crisv32_dev[2]; -+static struct crisv32_eth_leds *crisv32_leds[3]; -+ -+/* Default MAC address for interface 0. -+ * The real one will be set later. */ -+static struct sockaddr default_mac_iface0 = -+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00}}; -+ -+#ifdef CONFIG_CPU_FREQ -+static int -+crisv32_ethernet_freq_notifier(struct notifier_block *nb, unsigned long val, -+ void *data); -+ -+static struct notifier_block crisv32_ethernet_freq_notifier_block = { -+ .notifier_call = crisv32_ethernet_freq_notifier -+}; -+#endif -+ -+static void receive_timeout(unsigned long arg); -+static void receive_timeout_work(struct work_struct* work); -+static void transmit_timeout(unsigned long arg); -+ -+/* -+ * mask in and out tx/rx interrupts. -+ */ -+static inline void crisv32_disable_tx_ints(struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_no }; -+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx); -+} -+ -+static inline void crisv32_enable_tx_ints(struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_yes }; -+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx); -+} -+ -+static inline void crisv32_disable_rx_ints(struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_no }; -+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx); -+} -+ -+static inline void crisv32_enable_rx_ints(struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_yes }; -+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx); -+} -+ -+static inline void crisv32_disable_eth_ints(struct crisv32_ethernet_local *np) -+{ -+ int intr_mask_nw = 0x0; -+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw); -+} -+ -+static inline void crisv32_enable_eth_ints(struct crisv32_ethernet_local *np) -+{ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ /* For Artpec-3 we use overrun to workaround voodoo TR 87 */ -+ int intr_mask_nw = 0x1c00; -+#else -+ int intr_mask_nw = 0x1800; -+#endif -+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw); -+} -+ -+static inline int crisv32_eth_gigabit(struct crisv32_ethernet_local *np) -+{ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ return np->gigabit_mode; -+#else -+ return 0; -+#endif -+} -+ -+static inline void crisv32_eth_set_gigabit(struct crisv32_ethernet_local *np, -+ int g) -+{ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ np->gigabit_mode = g; -+#endif -+} -+ -+/* start/stop receiver */ -+static inline void crisv32_start_receiver(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rw_rec_ctrl rec_ctrl; -+ -+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.ma0 = regk_eth_yes; -+ rec_ctrl.broadcast = regk_eth_rec; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+} -+ -+static inline void crisv32_stop_receiver(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rw_rec_ctrl rec_ctrl; -+ -+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.ma0 = regk_eth_no; -+ rec_ctrl.broadcast = regk_eth_discard; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+} -+ -+static inline void crisv32_eth_reset(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rw_gen_ctrl gen_ctrl = { 0 }; -+ -+ gen_ctrl = REG_RD(eth, np->eth_inst, rw_gen_ctrl); -+ gen_ctrl.en = regk_eth_no; -+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); -+ gen_ctrl.en = regk_eth_yes; -+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); -+} -+ -+static void crisv32_eth_tx_cancel_frame(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rw_tr_ctrl tr_ctrl; -+ -+ /* Cancel any pending transmits. This should bring us to the -+ excessive collisions state but it doesn't always do it. */ -+ tr_ctrl = REG_RD(eth, np->eth_inst, rw_tr_ctrl); -+ tr_ctrl.cancel = 1; -+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl); -+ tr_ctrl.cancel = 0; -+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl); -+} -+ -+/* -+ * Hack to disconnect/reconnect the dma from the ethernet block while we reset -+ * things. TODO: verify that we don't need to disconnect out channels and -+ * remove that code. -+ * -+ * ARTPEC-3 has only a single ethernet block so np->eth_inst is always eth0. -+ * The strmux values are named slightly different, redefine to avoid #ifdefs -+ * in the code blocks. For artpec3 only regk_strmux_eth0 and channel 0/1 -+ * should be used. -+ */ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+#define regk_strmux_eth0 regk_strmux_eth -+#define regk_strmux_eth1 regk_strmux_eth -+#endif -+static inline void -+crisv32_disconnect_eth_tx_dma(struct crisv32_ethernet_local *np) -+{ -+ reg_strmux_rw_cfg strmux_cfg; -+ -+ strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg); -+ if (np->eth_inst == regi_eth0) -+ strmux_cfg.dma0 = regk_strmux_off; -+ else -+ strmux_cfg.dma6 = regk_strmux_off; -+ REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); -+} -+ -+static inline void crisv32_connect_eth_tx_dma(struct crisv32_ethernet_local *np) -+{ -+ reg_strmux_rw_cfg strmux_cfg; -+ -+ strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg); -+ if (np->eth_inst == regi_eth0) -+ strmux_cfg.dma0 = regk_strmux_eth0; -+ else -+ strmux_cfg.dma6 = regk_strmux_eth1; -+ REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); -+} -+ -+static inline void -+crisv32_disconnect_eth_rx_dma(struct crisv32_ethernet_local *np) -+{ -+ reg_strmux_rw_cfg strmux_cfg; -+ -+ strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg); -+ if (np->eth_inst == regi_eth0) -+ strmux_cfg.dma1 = regk_strmux_off; -+ else -+ strmux_cfg.dma7 = regk_strmux_off; -+ REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); -+} -+ -+static inline void crisv32_connect_eth_rx_dma(struct crisv32_ethernet_local *np) -+{ -+ reg_strmux_rw_cfg strmux_cfg; -+ -+ strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg); -+ if (np->eth_inst == regi_eth0) -+ strmux_cfg.dma1 = regk_strmux_eth0; -+ else -+ strmux_cfg.dma7 = regk_strmux_eth1; -+ REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); -+} -+ -+static int dma_wait_busy(int inst, int timeout) -+{ -+ reg_dma_rw_stream_cmd dma_sc; -+ -+ do { -+ dma_sc = REG_RD(dma, inst, rw_stream_cmd); -+ } while (timeout-- > 0 && dma_sc.busy); -+ return dma_sc.busy; -+} -+ -+static int __init crisv32_eth_request_irqdma(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Allocate IRQs and DMAs. */ -+ if (np->eth_inst == regi_eth0) { -+ if (request_irq(DMA0_INTR_VECT, crisv32tx_eth_interrupt, -+ 0, "Ethernet TX", dev)) { -+ return -EAGAIN; -+ } -+ -+ if (request_irq(DMA1_INTR_VECT, crisv32rx_eth_interrupt, -+ 0, "Ethernet RX", dev)) -+ goto err0_1; -+ -+ if (crisv32_request_dma(0, cardname, DMA_VERBOSE_ON_ERROR, -+ 12500000, dma_eth0)) -+ goto err0_2; -+ -+ if (crisv32_request_dma(1, cardname, DMA_VERBOSE_ON_ERROR, -+ 12500000, dma_eth0)) -+ goto err0_3; -+ -+ if (request_irq(ETH0_INTR_VECT, crisv32nw_eth_interrupt, 0, -+ cardname, dev)) { -+ crisv32_free_dma(1); -+err0_3: -+ crisv32_free_dma(0); -+err0_2: -+ free_irq(DMA1_INTR_VECT, dev); -+err0_1: -+ free_irq(DMA0_INTR_VECT, dev); -+ return -EAGAIN; -+ } -+ } else { -+ if (request_irq(DMA6_INTR_VECT, crisv32tx_eth_interrupt, -+ 0, cardname, dev)) -+ return -EAGAIN; -+ -+ if (request_irq(DMA7_INTR_VECT, crisv32rx_eth_interrupt, -+ 0, cardname, dev)) -+ goto err1_1; -+ -+ if (crisv32_request_dma(6, cardname, DMA_VERBOSE_ON_ERROR, -+ 0, dma_eth1)) -+ goto err1_2; -+ -+ if (crisv32_request_dma(7, cardname, DMA_VERBOSE_ON_ERROR, -+ 0, dma_eth1)) -+ goto err1_3; -+ -+ if (request_irq(ETH1_INTR_VECT, crisv32nw_eth_interrupt, 0, -+ cardname, dev)) { -+ crisv32_free_dma(7); -+err1_3: -+ crisv32_free_dma(6); -+err1_2: -+ free_irq(DMA7_INTR_VECT, dev); -+err1_1: -+ free_irq(DMA6_INTR_VECT, dev); -+ return -EAGAIN; -+ } -+ } -+ return 0; -+} -+ -+static int __init crisv32_eth_init_phy(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0); -+ -+ if (RESET_PHY) { -+#ifdef CONFIG_ETRAXFS -+ reg_config_rw_pad_ctrl pad_ctrl; -+ pad_ctrl = REG_RD(config, regi_config, rw_pad_ctrl); -+ pad_ctrl.phyrst_n = 0; -+ REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl); -+ -+ udelay(500); /* RESET_LEN */ -+ -+ pad_ctrl.phyrst_n = 1; -+ REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl); -+#else -+ reg_eth_rw_gen_ctrl gen_ctrl = REG_RD(eth, np->eth_inst, rw_gen_ctrl); -+ gen_ctrl.phyrst_n = 0; -+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); -+ -+ udelay(500); /* RESET_LEN */ -+ -+ gen_ctrl.phyrst_n = 1; -+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); -+#endif -+ -+ udelay(200); /* RESET_WAIT */ -+ } -+ -+ switch (PHY_MODE) { -+ case FALLBACK_PHY: -+ /* Fall back on using fixed iff there is no PHY on */ -+ /* the MDIO bus */ -+ np->fixed_phy = crisv32_eth_probe_transceiver(dev) != 0; -+ if (np->fixed_phy) -+ printk(KERN_WARNING -+ "eth: No transciever found, falling back " -+ "to fixed phy mode\n"); -+ break; -+ -+ case NO_PHY: -+ /* Don't even bother looking for a PHY, always rely */ -+ /* on fixed PHY */ -+ np->fixed_phy = 1; -+ break; -+ -+ default: /* HAVE_PHY */ -+ /* Look for a PHY and abort if there is none, */ -+ /* otherwise just carry on */ -+ if (crisv32_eth_probe_transceiver(dev)) { -+ printk(KERN_WARNING -+ "eth: No transceiver found, " -+ "removing interface\n"); -+ return -ENODEV; -+ } -+ np->fixed_phy = 0; -+ } -+ -+ if (np->fixed_phy) { -+ reg_eth_rw_rec_ctrl rec_ctrl; -+ -+ /* speed */ -+ np->current_speed = 100; -+ np->current_speed_selection = 100; /* Auto. */ -+ -+ /* duplex */ -+ np->full_duplex = 1; -+ np->current_duplex = full; -+ -+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.duplex = regk_eth_full; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } else { -+ np->mii_if.supports_gmii = mii_check_gmii_support(&np->mii_if); -+ -+ /* speed */ -+ np->current_speed = 10; -+ np->current_speed_selection = 0; /* Auto. */ -+ np->speed_timer = timer_init; -+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; -+ np->speed_timer.data = (unsigned long) dev; -+ np->speed_timer.function = crisv32_eth_check_speed; -+ -+ /* duplex */ -+ np->full_duplex = 0; -+ np->current_duplex = autoneg; -+ np->duplex_timer = timer_init; -+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; -+ np->duplex_timer.data = (unsigned long) dev; -+ np->duplex_timer.function = crisv32_eth_check_duplex; -+ } -+ -+ return 0; -+} -+ -+static void __init crisv32_eth_setup_controller(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ reg_eth_rw_gen_ctrl gen_ctrl; -+ -+ reg_eth_rw_tr_ctrl tr_ctrl = { -+ /* SW retransmits to avoid transmitter bugs. */ -+ .retry = regk_eth_no, -+ .pad = regk_eth_yes, -+ .crc = regk_eth_yes -+ }; -+ -+ reg_eth_rw_rec_ctrl rec_ctrl = { -+ .ma0 = regk_eth_no, /* enable at open() */ -+ .broadcast = regk_eth_no, -+ .max_size = regk_eth_size1522 -+ }; -+ -+ reg_eth_rw_ga_lo ga_lo = { 0 }; -+ reg_eth_rw_ga_hi ga_hi = { 0 }; -+ -+ /* -+ * Initialize group address registers to make sure that no -+ * unwanted addresses are matched. -+ */ -+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo); -+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi); -+ -+ /* Configure receiver and transmitter */ -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl); -+ -+ /* -+ * Read from rw_gen_ctrl so that we don't override any previous -+ * configuration. -+ */ -+ gen_ctrl = REG_RD(eth, np->eth_inst, rw_gen_ctrl); -+ gen_ctrl.phy = regk_eth_mii_clk; -+#ifdef CONFIG_ETRAXFS -+ /* On ETRAX FS, this bit has reversed meaning */ -+ gen_ctrl.flow_ctrl = regk_eth_no; -+#else -+ gen_ctrl.flow_ctrl = regk_eth_yes; -+#endif -+ -+ /* Enable ethernet controller with mii clk. */ -+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); -+ gen_ctrl.en = regk_eth_yes; -+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); -+} -+ -+static void crisv32_eth_reset_rx_ring(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int i; -+ -+ /* cleanup the rx-ring */ -+ for (i = 0; i < NBR_RX_DESC; i++) { -+ struct sk_buff *skb; -+ skb = np->dma_rx_descr_list[i].skb; -+ if (!skb -+ || (np->dma_rx_descr_list[i].descr.buf != -+ (void *)virt_to_phys(skb->data))) { -+ if (skb) -+ dev_kfree_skb(skb); -+ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); -+ np->dma_rx_descr_list[i].skb = skb; -+ np->dma_rx_descr_list[i].descr.buf = -+ (char*)virt_to_phys(skb->data); -+ } -+ if (np->dma_rx_descr_list[i].descr.in_eop) -+ np->rx_restarts_dropped++; -+ np->dma_rx_descr_list[i].descr.after = -+ (char*)virt_to_phys(skb->data -+ + MAX_MEDIA_DATA_SIZE); -+ np->dma_rx_descr_list[i].descr.eol = 0; -+ np->dma_rx_descr_list[i].descr.in_eop = 0; -+ /* Workaround cache bug */ -+ flush_dma_descr(&np->dma_rx_descr_list[i].descr, 1); -+ } -+ -+ /* reset rx-ring */ -+ np->active_rx_desc = &np->dma_rx_descr_list[0]; -+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1]; -+ np->last_rx_desc = np->prev_rx_desc; -+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1; -+ flush_dma_descr(&np->dma_rx_descr_list[NBR_RX_DESC - 1].descr, 0); -+ /* ready to accept new packets. */ -+ np->new_rx_package = 1; -+ -+ /* Fill context descriptors. */ -+ np->ctxt_in.next = 0; -+ np->ctxt_in.saved_data = -+ (void *)virt_to_phys(&np->active_rx_desc->descr); -+ np->ctxt_in.saved_data_buf = np->active_rx_desc->descr.buf; -+} -+ -+static inline int crisv32_eth_tx_ring_full(struct crisv32_ethernet_local *np) -+{ -+ crisv32_eth_descr *active = np->active_tx_desc; -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ active = phys_to_virt((unsigned long)active->descr.next); -+#endif -+ if (active == np->catch_tx_desc) -+ return 1; -+ return 0; -+} -+ -+static void crisv32_eth_reset_tx_ring(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* free un-handled tx packets */ -+ while (np->txpackets || np->catch_tx_desc != np->active_tx_desc) { -+ np->txpackets--; -+ if (np->catch_tx_desc->skb) -+ dev_kfree_skb(np->catch_tx_desc->skb); -+ -+ np->catch_tx_desc->skb = 0; -+ np->catch_tx_desc = -+ phys_to_virt((int)np->catch_tx_desc->descr.next); -+ } -+ -+ WARN_ON(np->txpackets != 0); -+ np->txpackets = 0; -+ -+ /* reset tx-ring */ -+ np->dma_tx_descr_list[0].descr.buf = -+ np->dma_tx_descr_list[0].descr.after = 0; -+ np->dma_tx_descr_list[0].descr.eol = 1; -+ -+ np->active_tx_desc = &np->dma_tx_descr_list[0]; -+ np->prev_tx_desc = &np->dma_tx_descr_list[NBR_TX_DESC - 1]; -+ np->catch_tx_desc = &np->dma_tx_descr_list[0]; -+ -+ np->ctxt_out.next = 0; -+ np->ctxt_out.saved_data = -+ (void *)virt_to_phys(&np->dma_tx_descr_list[0].descr); -+ -+} -+ -+static void crisv32_eth_reset_rings(struct net_device *dev) -+{ -+ crisv32_eth_reset_tx_ring(dev); -+ crisv32_eth_reset_rx_ring(dev); -+} -+ -+/* -+ * Really advance the receive ring. RX interrupts must be off. -+ */ -+static void __crisv32_eth_rx_ring_advance(struct crisv32_ethernet_local *np) -+{ -+ if (np->newbuf) -+ np->active_rx_desc->descr.buf = (void *) np->newbuf; -+ np->active_rx_desc->descr.after = -+ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE; -+ np->active_rx_desc->descr.eol = 1; -+ np->active_rx_desc->descr.in_eop = 0; -+ np->active_rx_desc = phys_to_virt((int)np->active_rx_desc->descr.next); -+ barrier(); -+ np->prev_rx_desc->descr.eol = 0; -+ -+ /* Workaround cache bug. */ -+ flush_dma_descr(&np->prev_rx_desc->descr, 0); -+ np->prev_rx_desc = phys_to_virt((int)np->prev_rx_desc->descr.next); -+ flush_dma_descr(&np->prev_rx_desc->descr, 1); -+} -+ -+/* -+ * Advance the receive ring. RX interrupts must be off. -+ */ -+static inline void -+crisv32_eth_rx_ring_advance(struct crisv32_ethernet_local *np) -+{ -+ /* -+ * When the input DMA reaches eol precaution must be taken, otherwise -+ * the DMA could stop. The problem occurs if the eol flag is re-placed -+ * on the descriptor that the DMA stands on before the DMA proceed to -+ * the next descriptor. This case could, for example, happen if there -+ * is a traffic burst and then the network goes silent. To prevent this -+ * we make sure that we do not set the eol flag on the descriptor that -+ * the DMA stands on. -+ */ -+ unsigned long dma_pos; -+ -+ /* Get the current input dma position. */ -+ dma_pos = REG_RD_INT(dma, np->dma_in_inst, rw_saved_data); -+ -+ if (virt_to_phys(&np->active_rx_desc->descr) != dma_pos) { -+ crisv32_eth_descr *cur, *nxt; -+ -+ /* Now really advance the ring one step. */ -+ __crisv32_eth_rx_ring_advance(np); -+ -+ cur = np->active_rx_desc; -+ nxt = (void *)phys_to_virt((unsigned long)cur->descr.next); -+ flush_dma_descr(&cur->descr, 0); -+ flush_dma_descr(&nxt->descr, 0); -+ if (!cur->descr.in_eop && nxt->descr.in_eop) { -+ /* TODO: Investigate this more. The DMA seems to have -+ skipped a descriptor, possibly due to incoherence -+ between the CPU L1 cache and the DMA updates to the -+ descriptor. */ -+ np->newbuf = (unsigned long) np->active_rx_desc->descr.buf; -+ __crisv32_eth_rx_ring_advance(np); -+ } -+ /* flush after peek. */ -+ flush_dma_descr(&cur->descr, 0); -+ flush_dma_descr(&nxt->descr, 0); -+ } else { -+ /* delay the advancing of the ring. */ -+ np->new_rx_package = 0; -+ } -+} -+ -+static void __init crisv32_eth_init_rings(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int i; -+ -+ /* Initialise receive descriptors for interface. */ -+ for (i = 0; i < NBR_RX_DESC; i++) { -+ struct sk_buff *skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); -+ -+ np->dma_rx_descr_list[i].skb = skb; -+ np->dma_rx_descr_list[i].descr.buf = -+ (char*)virt_to_phys(skb->data); -+ np->dma_rx_descr_list[i].descr.after = -+ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE); -+ -+ np->dma_rx_descr_list[i].descr.eol = 0; -+ np->dma_rx_descr_list[i].descr.in_eop = 0; -+ np->dma_rx_descr_list[i].descr.next = -+ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr); -+ } -+ /* bend the list into a ring */ -+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next = -+ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr); -+ -+ /* Initialize transmit descriptors. */ -+ for (i = 0; i < NBR_TX_DESC; i++) { -+ np->dma_tx_descr_list[i].descr.wait = 1; -+ np->dma_tx_descr_list[i].descr.eol = 0; -+ np->dma_tx_descr_list[i].descr.out_eop = 0; -+ np->dma_tx_descr_list[i].descr.next = -+ (void*)virt_to_phys(&np->dma_tx_descr_list[i+1].descr); -+ } -+ /* bend the list into a ring */ -+ np->dma_tx_descr_list[NBR_TX_DESC - 1].descr.next = -+ (void *) virt_to_phys(&np->dma_tx_descr_list[0].descr); -+ -+ crisv32_eth_reset_rings(dev); -+} -+ -+static void __init crisv32_init_leds(int ledgrp, struct net_device *dev) -+{ -+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0); -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Use already allocated led grp if initialized */ -+ if (crisv32_leds[ledgrp] != NULL) { -+ np->leds = crisv32_leds[ledgrp]; -+ return; -+ } -+ -+ crisv32_leds[ledgrp] = -+ kmalloc(sizeof(struct crisv32_eth_leds), GFP_KERNEL); -+ -+ crisv32_leds[ledgrp]->ledgrp = ledgrp; -+ crisv32_leds[ledgrp]->led_active = 0; -+ crisv32_leds[ledgrp]->ifisup[0] = 0; -+ crisv32_leds[ledgrp]->ifisup[1] = 0; -+ /* NOTE: Should this value be set to zero as the jiffies timer -+ can wrap? */ -+ crisv32_leds[ledgrp]->led_next_time = jiffies; -+ -+ crisv32_leds[ledgrp]->clear_led_timer = timer_init; -+ crisv32_leds[ledgrp]->clear_led_timer.function = -+ crisv32_clear_network_leds; -+ crisv32_leds[ledgrp]->clear_led_timer.data = (unsigned long) dev; -+ -+ spin_lock_init(&crisv32_leds[ledgrp]->led_lock); -+ -+ np->leds = crisv32_leds[ledgrp]; -+} -+ -+static int __init crisv32_ethernet_init(void) -+{ -+ struct crisv32_ethernet_local *np; -+ int ret = 0; -+ -+#ifdef CONFIG_ETRAXFS -+ printk("ETRAX FS 10/100MBit ethernet v0.01 (c)" -+ " 2003 Axis Communications AB\n"); -+#else -+ printk("ARTPEC-3 10/100 MBit ethernet (c)" -+ " 2003-2009 Axis Communications AB\n"); -+#endif -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ { -+ reg_clkgen_rw_clk_ctrl clk_ctrl = REG_RD(clkgen, regi_clkgen, -+ rw_clk_ctrl); -+ clk_ctrl.eth = clk_ctrl.dma0_1_eth = regk_clkgen_yes; -+ REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); -+ } -+#endif -+{ -+ int iface0 = 0; -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ if (crisv32_pinmux_alloc_fixed(pinmux_eth)) -+ panic("Eth pinmux\n"); -+#endif -+ -+ if (!(crisv32_dev[iface0] = alloc_etherdev(sizeof *np))) -+ return -ENOMEM; -+ -+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface0]); -+ -+#if defined(CONFIG_ETRAX_ETH0_USE_LEDGRP0) -+ crisv32_init_leds(CRIS_LED_GRP_0,crisv32_dev[iface0]); -+#elif defined(CONFIG_ETRAX_ETH0_USE_LEDGRP1) -+ crisv32_init_leds(CRIS_LED_GRP_1,crisv32_dev[iface0]); -+#else -+ crisv32_init_leds(CRIS_LED_GRP_NONE,crisv32_dev[iface0]); -+#endif -+ -+ np = (struct crisv32_ethernet_local *) netdev_priv(crisv32_dev[iface0]); -+ np->eth_inst = regi_eth0; -+ np->dma_out_inst = regi_dma0; -+ np->dma_in_inst = regi_dma1; -+ -+ np->mii_if.dev = crisv32_dev[iface0]; -+ np->mii_if.mdio_read = crisv32_eth_get_mdio_reg; -+ np->mii_if.mdio_write = crisv32_eth_set_mdio_reg; -+ np->mii_if.phy_id_mask = 0x1f; -+ np->mii_if.reg_num_mask = 0x1f; -+ -+ np->use_leds = 1; -+ np->autoneg_normal = 1; -+ -+ -+ register_netdev(crisv32_dev[iface0]); -+ -+ /* Set up default MAC address */ -+ memcpy(crisv32_dev[iface0]->dev_addr, default_mac_iface0.sa_data, 6); -+ crisv32_eth_set_mac_address(crisv32_dev[iface0], &default_mac_iface0); -+ if (crisv32_eth_request_irqdma(crisv32_dev[iface0])) -+ printk("%s: eth0 unable to allocate IRQ and DMA resources\n", -+ __func__); -+ np->txpackets = 0; -+ crisv32_eth_init_rings(crisv32_dev[iface0]); -+ crisv32_eth_setup_controller(crisv32_dev[iface0]); -+ ret |= crisv32_eth_init_phy(crisv32_dev[iface0]); -+ if (ret) { -+ unregister_netdev(crisv32_dev[iface0]); -+ return ret; -+ } -+} -+ -+#ifdef CONFIG_ETRAX_ETHERNET_IFACE1 -+{ -+ int iface1 = 0; -+ /* Default MAC address for interface 1. -+ * The real one will be set later. */ -+ static struct sockaddr default_mac_iface1 = -+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x01}}; -+ -+ if (crisv32_pinmux_alloc_fixed(pinmux_eth1)) -+ panic("Eth pinmux\n"); -+ -+ /* Increase index to device array if interface 0 is enabled as well.*/ -+#ifdef CONFIG_ETRAX_ETHERNET_IFACE0 -+ iface1++; -+#endif -+ if (!(crisv32_dev[iface1] = alloc_etherdev(sizeof *np))) -+ return -ENOMEM; -+ -+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface1]); -+ -+#if defined(CONFIG_ETRAX_ETH1_USE_LEDGRP0) -+ crisv32_init_leds(CRIS_LED_GRP_0,crisv32_dev[iface1]); -+#elif defined(CONFIG_ETRAX_ETH1_USE_LEDGRP1) -+ crisv32_init_leds(CRIS_LED_GRP_1,crisv32_dev[iface1]); -+#else -+ crisv32_init_leds(CRIS_LED_GRP_NONE,crisv32_dev[iface1]); -+#endif -+ -+ np = (struct crisv32_ethernet_local *) netdev_priv(crisv32_dev[iface1]); -+ np->eth_inst = regi_eth1; -+ np->dma_out_inst = regi_dma6; -+ np->dma_in_inst = regi_dma7; -+ -+ np->mii_if.dev = crisv32_dev[iface1]; -+ np->mii_if.mdio_read = crisv32_eth_get_mdio_reg; -+ np->mii_if.mdio_write = crisv32_eth_set_mdio_reg; -+ np->mii_if.phy_id_mask = 0x1f; -+ np->mii_if.reg_num_mask = 0x1f; -+ -+ -+ register_netdev(crisv32_dev[iface1]); -+ -+ /* Set up default MAC address */ -+ memcpy(crisv32_dev[iface1]->dev_addr, default_mac_iface1.sa_data, 6); -+ crisv32_eth_set_mac_address(crisv32_dev[iface1], &default_mac_iface1); -+ -+ if (crisv32_eth_request_irqdma(crisv32_dev[iface1])) -+ printk("%s: eth1 unable to allocate IRQ and DMA resources\n", -+ __func__); -+ np->txpackets = 0; -+ crisv32_eth_init_rings(crisv32_dev[iface1]); -+ crisv32_eth_setup_controller(crisv32_dev[iface1]); -+ ret |= crisv32_eth_init_phy(crisv32_dev[iface1]); -+ if (ret) { -+ unregister_netdev(crisv32_dev[iface1]); -+ return ret; -+ } -+} -+#endif /* CONFIG_ETRAX_ETHERNET_IFACE1 */ -+ -+#ifdef CONFIG_CPU_FREQ -+ cpufreq_register_notifier(&crisv32_ethernet_freq_notifier_block, -+ CPUFREQ_TRANSITION_NOTIFIER); -+#endif -+ -+ return ret; -+} -+ -+static struct net_device_ops crisv32_netdev_ops = { -+ .ndo_open = crisv32_eth_open, -+ .ndo_stop = crisv32_eth_close, -+ .ndo_start_xmit = crisv32_eth_send_packet, -+ .ndo_set_rx_mode = crisv32_eth_set_rx_mode, -+ .ndo_validate_addr = eth_validate_addr, -+ .ndo_set_mac_address = crisv32_eth_set_mac_address, -+ .ndo_do_ioctl =crisv32_eth_ioctl, -+ .ndo_get_stats = crisv32_get_stats, -+ .ndo_tx_timeout = crisv32_eth_do_tx_recovery, -+ .ndo_set_config = crisv32_eth_set_config, -+}; -+ -+static int __init crisv32_ethernet_device_init(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np; -+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0); -+ -+ dev->base_addr = 0; /* Just to have something to show. */ -+ -+ /* we do our own locking */ -+ dev->features |= NETIF_F_LLTX; -+ -+ /* We use several IRQs and DMAs so just report 0 here. */ -+ dev->irq = 0; -+ dev->dma = 0; -+ -+ /* -+ * Fill in our handlers so the network layer can talk to us in the -+ * future. -+ */ -+ dev->netdev_ops = &crisv32_netdev_ops; -+ dev->ethtool_ops = &crisv32_ethtool_ops; -+ dev->watchdog_timeo = HZ * 10; -+#ifdef CONFIG_NET_POLL_CONTROLLER -+ dev->poll_controller = crisv32_netpoll; -+#endif -+ np = netdev_priv(dev); -+ np->dev = dev; -+ -+ /* -+ * 8 skbs keeps the system very reponsive even under high load. -+ * At 64 the system locks, pretty much the same way as without NAPI. -+ * -+ * TODO: meassure with 2 interfaces -+ */ -+ netif_napi_add(dev, &np->napi, crisv32_eth_poll, 8); -+ -+ spin_lock_init(&np->lock); -+ spin_lock_init(&np->transceiver_lock); -+ -+ np->receive_timer = timer_init; -+ np->receive_timer.data = (unsigned)dev; -+ np->receive_timer.function = receive_timeout; -+ -+ INIT_WORK(&np->receive_work, receive_timeout_work); -+ -+ np->transmit_timer = timer_init; -+ np->transmit_timer.data = (unsigned)dev; -+ np->transmit_timer.function = transmit_timeout; -+ -+ return 0; -+} -+ -+static int crisv32_eth_open(struct net_device *dev) -+{ -+ struct sockaddr mac_addr; -+ reg_dma_rw_ack_intr ack_intr = { .data = 1, .in_eop = 1 }; -+ reg_eth_rw_clr_err clr_err = {.clr = regk_eth_yes}; -+ /* -+ * dont interrupt us at any stat counter thresholds, only at urun -+ * and exc_col. -+ */ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ /* For Artpec-3 we use overrun to workaround voodoo TR 87 */ -+ int intr_mask_nw = 0x1c00; -+#else -+ int intr_mask_nw = 0x1800; -+#endif -+ int eth_ack_intr = 0xffff; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->lock); -+ crisv32_eth_set_gigabit(np, 0); -+ -+ crisv32_disable_tx_ints(np); -+ crisv32_disable_rx_ints(np); -+ -+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err); -+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, eth_ack_intr); -+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw); -+ crisv32_eth_reset_rings(dev); -+ -+ /* Give the hardware an idea of what MAC address we want. */ -+ memcpy(mac_addr.sa_data, dev->dev_addr, dev->addr_len); -+ crisv32_eth_set_mac_address(dev, &mac_addr); -+ -+ /* Enable irq and make sure that the irqs are cleared. */ -+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr); -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ -+ crisv32_disconnect_eth_rx_dma(np); -+ -+ /* Prepare input DMA. */ -+ DMA_RESET(np->dma_in_inst); -+ DMA_ENABLE(np->dma_in_inst); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2); -+#endif -+ DMA_START_CONTEXT(np->dma_in_inst, virt_to_phys(&np->ctxt_in)); -+ DMA_CONTINUE(np->dma_in_inst); -+ crisv32_enable_rx_ints(np); -+ crisv32_start_receiver(np); -+ -+ /* Prepare output DMA. */ -+ DMA_RESET(np->dma_out_inst); -+ DMA_ENABLE(np->dma_out_inst); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4); -+#endif -+ crisv32_connect_eth_rx_dma(np); -+ -+ netif_start_queue(dev); -+ crisv32_enable_tx_ints(np); -+ -+ if (!np->fixed_phy) { -+ /* Start duplex/speed timers */ -+ if (!timer_pending(&np->speed_timer)) -+ add_timer(&np->speed_timer); -+ if (!timer_pending(&np->duplex_timer)) -+ add_timer(&np->duplex_timer); -+ } -+ -+ spin_unlock(&np->lock); -+ /* -+ * We are now ready to accept transmit requests from the queueing -+ * layer of the networking. -+ */ -+ np->link = 1; -+ netif_carrier_on(dev); -+ napi_enable(&np->napi); -+ -+ return 0; -+} -+ -+static int crisv32_eth_close(struct net_device *dev) -+{ -+ reg_dma_rw_ack_intr ack_intr = {0}; -+ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ unsigned long flags; -+ -+ del_timer(&np->transmit_timer); -+ spin_lock_irqsave(&np->lock, flags); -+ -+ /* stop the receiver before the DMA channels to avoid overruns. */ -+ crisv32_disable_rx_ints(np); -+ napi_disable(&np->napi); -+ crisv32_stop_receiver(np); -+ -+ netif_stop_queue(dev); -+ -+ /* Reset the TX DMA in case it has hung on something. */ -+ DMA_RESET(np->dma_in_inst); -+ -+ /* Stop DMA */ -+ DMA_STOP(np->dma_in_inst); -+ DMA_STOP(np->dma_out_inst); -+ -+ /* Disable irq and make sure that the irqs are cleared. */ -+ crisv32_disable_tx_ints(np); -+ ack_intr.data = 1; -+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr); -+ -+ ack_intr.in_eop = 1; -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ -+ np->sender_started = 0; -+ spin_unlock_irqrestore(&np->lock, flags); -+ -+ /* Update the statistics. */ -+ update_rx_stats(np); -+ update_tx_stats(np); -+ -+ if (!np->fixed_phy) { -+ /* Stop speed/duplex timers */ -+ del_timer(&np->speed_timer); -+ del_timer(&np->duplex_timer); -+ } -+ -+ return 0; -+} -+ -+static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr) -+{ -+ int i; -+ static int first = 1; -+ -+ unsigned char *addr = ((struct sockaddr*)vpntr)->sa_data; -+ -+ reg_eth_rw_ma0_lo ma0_lo = -+ { addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24)}; -+ -+ reg_eth_rw_ma0_hi ma0_hi = { addr[4] | (addr[5] << 8) }; -+ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Remember the address. */ -+ memcpy(dev->dev_addr, addr, dev->addr_len); -+ -+ /* -+ * Write the address to the hardware. -+ * Note the way the address is wrapped: -+ * ma0_l0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24); -+ * ma0_hi = a0_4 | (a0_5 << 8); -+ */ -+ REG_WR(eth, np->eth_inst, rw_ma0_lo, ma0_lo); -+ REG_WR(eth, np->eth_inst, rw_ma0_hi, ma0_hi); -+ -+ if (first) { -+ printk(KERN_INFO "%s: changed MAC to ", dev->name); -+ -+ for (i = 0; i < 5; i++) -+ printk("%02X:", dev->dev_addr[i]); -+ printk("%02X\n", dev->dev_addr[i]); -+ -+ first = 0; -+ } -+ -+ return 0; -+} -+ -+static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *) dev_id; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ reg_dma_r_masked_intr masked_in; -+ -+ masked_in = REG_RD(dma, np->dma_in_inst, r_masked_intr); -+ -+ if (masked_in.in_eop) { -+ reg_dma_rw_ack_intr ack_intr = {0}; -+ -+ /* -+ * Ack the rx irq even if we are not prepared to start -+ * polling. This is needed to handle incomming packets -+ * during the stop sequence. -+ */ -+ ack_intr.in_eop = 1; -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ -+ mod_timer(&np->receive_timer, jiffies + HZ); -+ np->do_rx_recovery = 0; -+ -+ if (napi_schedule_prep(&np->napi)) { -+ crisv32_disable_rx_ints(np); -+ crisv32_disable_tx_ints(np); -+ /* put us onto the poll list */ -+ __napi_schedule(&np->napi); -+ } -+ } else { -+ /* Unexpected, ACK it and hope for the best. */ -+ reg_dma_rw_ack_intr ack_intr = { -+ .group = 1, -+ .ctxt = 1, -+ .data = 1, -+ .in_eop = 0, -+ .stream_cmd = 1, -+ .dummy1 = ~0 -+ }; -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static inline void crisv32_eth_roll_tx_timer(struct crisv32_ethernet_local *np) -+{ -+ /* If there are more packets in the ring, roll the tx timer. */ -+ if (np->txpackets) { -+ /* Eth pause frames may halt us for up to 320ms (100mbit). */ -+ unsigned long timeout = jiffies + (HZ / 3) + 1; -+ mod_timer(&np->transmit_timer, timeout); -+ } -+ else -+ del_timer(&np->transmit_timer); -+} -+ -+/* Call with np->lock held. */ -+static void _crisv32_tx_ring_advance(struct crisv32_ethernet_local *np, -+ int cleanup) -+{ -+ reg_dma_rw_stat stat; -+ dma_descr_data *dma_pos; -+ struct net_device *dev = np->dev; -+ int eol; -+ -+ /* Get the current output dma position. */ -+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data)); -+ stat = REG_RD(dma, np->dma_out_inst, rw_stat); -+ eol = stat.list_state == regk_dma_data_at_eol; -+ if (cleanup || eol) -+ dma_pos = &np->active_tx_desc->descr; -+ -+ /* Take care of transmited dma descriptors and report sent packet. */ -+ while (np->txpackets && (&np->catch_tx_desc->descr != dma_pos)) { -+ /* Update sent packet statistics. */ -+ np->stats.tx_bytes += np->catch_tx_desc->skb->len; -+ np->stats.tx_packets++; -+ -+ dev_kfree_skb_any(np->catch_tx_desc->skb); -+ np->catch_tx_desc->skb = 0; -+ np->txpackets--; -+ np->catch_tx_desc->descr.buf = 0; -+ np->catch_tx_desc = -+ phys_to_virt((int)np->catch_tx_desc->descr.next); -+ np->do_tx_recovery = 0; -+ np->retrans = 0; -+ -+ netif_wake_queue(dev); -+ } -+} -+ -+static inline void crisv32_tx_ring_advance(struct crisv32_ethernet_local *np) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&np->lock, flags); -+ _crisv32_tx_ring_advance(np, 0); -+ crisv32_eth_roll_tx_timer(np); -+ spin_unlock_irqrestore(&np->lock, flags); -+} -+ -+static inline int crisv32_tx_complete(struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_ack_intr ack_intr = { .data = 1 }; -+ reg_dma_r_intr ints; -+ int r = 0; -+ -+ /* We are interested in the unmasked raw interrupt source here. When -+ polling with tx interrupts masked off we still want to do -+ tx completition when the DMA makes progress. */ -+ ints = REG_RD(dma, np->dma_out_inst, r_intr); -+ if (ints.data) -+ { -+ /* ack the interrupt, if it was active */ -+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr); -+ crisv32_tx_ring_advance(np); -+ r = 1; -+ } -+ return r; -+} -+ -+static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev_id); -+ -+ crisv32_tx_complete(np); -+ return IRQ_HANDLED; -+} -+ -+ -+/* Update receive errors. */ -+static void -+update_rx_stats(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rs_rec_cnt r; -+ -+ r = REG_RD(eth, np->eth_inst, rs_rec_cnt); -+ -+ np->stats.rx_over_errors += r.congestion; -+ np->stats.rx_crc_errors += r.crc_err; -+ np->stats.rx_frame_errors += r.align_err; -+ np->stats.rx_length_errors += r.oversize; -+ np->stats.rx_errors += r.crc_err + r.align_err + -+ r.oversize + r.congestion; -+} -+ -+/* Update transmit errors. */ -+static void update_tx_stats(struct crisv32_ethernet_local *np) -+{ -+ reg_eth_rs_tr_cnt r; -+ reg_eth_rs_phy_cnt rp; -+ -+ r = REG_RD(eth, np->eth_inst, rs_tr_cnt); -+ rp = REG_RD(eth, np->eth_inst, rs_phy_cnt); -+ -+ /* r.deferred is not good for counting collisions because it also -+ includes frames that have to wait for the interframe gap. That -+ means we get deferred frames even when in full duplex. -+ Here we don't actually count the number of collisions that -+ occured (artpec3 seems to lack such a counter), instead we count -+ the number of frames that collide once or more. */ -+ np->stats.collisions += r.mult_col + r.single_col; -+ np->stats.tx_window_errors += r.late_col; -+ np->stats.tx_carrier_errors += rp.carrier_loss; -+ -+ /* Ordinary collisions are not errors, they are just part of -+ ethernet's bus arbitration and congestion control mechanisms. -+ Late collisions are serious errors though. */ -+ np->stats.tx_errors += r.late_col; -+} -+ -+/* Get current statistics. */ -+static struct net_device_stats *crisv32_get_stats(struct net_device *dev) -+{ -+ unsigned long flags; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ spin_lock_irqsave(&np->lock, flags); -+ -+ update_rx_stats(np); -+ update_tx_stats(np); -+ -+ spin_unlock_irqrestore(&np->lock, flags); -+ -+ return &np->stats; -+} -+ -+/* Check for network errors. This acknowledge the received interrupt. */ -+static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *) dev_id; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ reg_eth_r_masked_intr intr_mask; -+ int ack_intr = 0xffff; -+ reg_eth_rw_clr_err clr_err; -+ -+ intr_mask = REG_RD(eth, np->eth_inst, r_masked_intr); -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ /* Only apply the workaround if it is not already pending. -+ enable_eth_ints will re-enable the orun interrupt regardless -+ of pending_overrun. */ -+ if (intr_mask.orun && !np->pending_overrun) { -+ reg_eth_rw_rec_ctrl rec_ctrl = -+ REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ np->saved_rec_ctrl = rec_ctrl; -+ np->overrun_set = 1; -+ DMA_STOP(np->dma_in_inst); -+ rec_ctrl.ma0 = regk_eth_no; -+ rec_ctrl.broadcast = regk_eth_no; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ np->saved_ga_lo = REG_RD_INT(eth, np->eth_inst, rw_ga_lo); -+ np->saved_ga_hi = REG_RD_INT(eth, np->eth_inst, rw_ga_hi); -+ REG_WR_INT(eth, np->eth_inst, rw_ga_lo, 0); -+ REG_WR_INT(eth, np->eth_inst, rw_ga_hi, 0); -+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, -+ REG_RD_INT(eth, np->eth_inst, rw_intr_mask) & 0xfbff); -+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, 0x400); -+ intr_mask.orun = 0; -+ np->pending_overrun = 1; -+ if (!np->napi_processing) -+ crisv32_eth_restart_rx_dma(np->dev, np); -+ -+ return IRQ_HANDLED; -+ } -+#endif -+ -+ /* -+ * Check for underrun and/or excessive collisions. Note that the -+ * rw_clr_err register clears both underrun and excessive collision -+ * errors, so there's no need to check them separately. -+ */ -+ if (np->sender_started -+ && (intr_mask.urun || intr_mask.exc_col)) { -+ unsigned long flags; -+ -+ /* Underrun are considered to be tx-errors. */ -+ np->stats.tx_errors += intr_mask.urun; -+ np->stats.tx_fifo_errors += intr_mask.urun; -+ -+ /* -+ * Protect against the tx-interrupt messing with -+ * the tx-ring. -+ */ -+ spin_lock_irqsave(&np->lock, flags); -+ -+ /* DMA should have stopped now, eat from the ring before -+ removing anything due to tx errors. */ -+ _crisv32_tx_ring_advance(np, 0); -+ -+ /* -+ * Drop packets after 15 retries. -+ * TODO: Add backoff. -+ */ -+ if (np->retrans > 15 && np->txpackets) { -+ dev_kfree_skb_irq(np->catch_tx_desc->skb); -+ np->catch_tx_desc->skb = 0; -+ np->catch_tx_desc->descr.buf = 0; -+ np->catch_tx_desc = -+ phys_to_virt((int) -+ np->catch_tx_desc->descr.next); -+ flush_dma_descr(&np->catch_tx_desc->descr, 0); -+ -+ np->txpackets--; -+ np->retrans = 0; -+ netif_wake_queue(dev); -+ np->stats.tx_dropped++; -+ } -+ np->ctxt_out.next = 0; -+ if (np->txpackets) { -+ np->retrans++; -+ np->ctxt_out.saved_data = (void *) -+ virt_to_phys(&np->catch_tx_desc->descr); -+ np->ctxt_out.saved_data_buf = -+ np->catch_tx_desc->descr.buf; -+ WARN_ON(!np->ctxt_out.saved_data_buf); -+ flush_dma_descr(&np->catch_tx_desc->descr, 0); -+ cris_flush_cache_range(&np->ctxt_out, -+ sizeof np->ctxt_out); -+ -+ /* restart the DMA */ -+ DMA_START_CONTEXT(np->dma_out_inst, -+ (int) virt_to_phys(&np->ctxt_out)); -+ np->sender_started = 1; -+ } -+ else { -+ /* Load dummy context but do not load the data -+ descriptor nor start the burst. This brings the -+ buggy eth transmitter back in sync with the DMA -+ avoiding malformed frames. */ -+ REG_WR(dma, np->dma_out_inst, rw_group_down, -+ (int) virt_to_phys(&np->ctxt_out)); -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c); -+ np->sender_started = 0; -+ } -+ crisv32_eth_roll_tx_timer(np); -+ spin_unlock_irqrestore(&np->lock, flags); -+ } -+ -+ ack_intr = *(u32 *)&intr_mask; -+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr); -+ clr_err.clr = 1; -+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err); -+ -+ update_rx_stats(np); -+ update_tx_stats(np); -+ -+ return IRQ_HANDLED; -+} -+ -+/* We have a good packet(s), get it/them out of the buffers. */ -+static int crisv32_eth_receive_packet(struct net_device *dev) -+{ -+ int length; -+ struct sk_buff *skb; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ struct sk_buff *tmp; -+ unsigned long flags; -+ -+ DEBUG(printk("crisv32_receive_packet\n")); -+ -+ /* Roll the rx bug timer. */ -+ mod_timer(&np->receive_timer, jiffies + HZ); -+ -+ /* Activate LED */ -+ spin_lock_irqsave(&np->leds->led_lock, flags); -+ if (!np->leds->led_active && time_after(jiffies, -+ np->leds->led_next_time)) { -+ /* light the network leds depending on the current speed. */ -+ crisv32_set_network_leds(CRIS_LED_ACTIVITY, dev); -+ -+ /* Set the earliest time we may clear the LED */ -+ np->leds->led_next_time = jiffies + NET_FLASH_TIME; -+ np->leds->led_active = 1; -+ np->leds->clear_led_timer.data = (unsigned long) dev; -+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10); -+ } -+ spin_unlock_irqrestore(&np->leds->led_lock, flags); -+ -+ /* Discard CRC (4 bytes). */ -+ length = (np->active_rx_desc->descr.after) - -+ (np->active_rx_desc->descr.buf) - 4; -+ -+ tmp = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); -+ if (!tmp) { -+ np->stats.rx_errors++; -+ printk(KERN_NOTICE "%s: memory squeeze," -+ " dropping packet.", -+ dev->name); -+ return 0; -+ } -+ skb = np->active_rx_desc->skb; -+ np->active_rx_desc->skb = tmp; -+ skb_put(skb, length); -+ -+ np->newbuf = virt_to_phys(np->active_rx_desc->skb->data); -+ -+ skb->dev = dev; -+ skb->protocol = eth_type_trans(skb, dev); -+ skb->ip_summed = CHECKSUM_NONE; -+ -+ np->stats.multicast += skb->pkt_type == PACKET_MULTICAST; -+ /* Send the packet to the upper layer. */ -+ netif_receive_skb(skb); -+ np->last_rx_desc = -+ phys_to_virt((int) -+ np->last_rx_desc->descr.next); -+ -+ /* Forward rotate the receive ring. */ -+ crisv32_eth_rx_ring_advance(np); -+ return length; -+} -+ -+/* Must be called with the np-lock held. */ -+static void -+__crisv32_eth_restart_rx_dma(struct net_device* dev, -+ struct crisv32_ethernet_local *np) -+{ -+ reg_dma_rw_ack_intr ack_intr = {0}; -+ reg_dma_rw_stream_cmd dma_sc = {0}; -+ reg_dma_rw_stat stat; -+ int resets = 0; -+ reg_eth_rw_intr_mask eth_intr_mask; -+ -+ np->rx_dma_restarts++; -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ if (np->pending_overrun) { -+ np->pending_overrun = 0; -+ REG_WR_INT(eth, np->eth_inst, rw_ga_lo, np->saved_ga_lo); -+ REG_WR_INT(eth, np->eth_inst, rw_ga_hi, np->saved_ga_hi); -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, np->saved_rec_ctrl); -+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, -+ REG_RD_INT(eth, regi_eth, rw_intr_mask) | 0x400); -+ DMA_CONTINUE(np->dma_in_inst); -+ } -+#endif -+ /* Bring down the receiver. */ -+ crisv32_disable_rx_ints(np); -+ crisv32_disconnect_eth_rx_dma(np); -+ -+ /* Stop DMA and ack possible ints. */ -+ DMA_STOP(np->dma_in_inst); -+ ack_intr.in_eop = 1; -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ -+ crisv32_stop_receiver(np); -+ -+ /* Disable overrun interrupts while receive is shut off. */ -+ eth_intr_mask = REG_RD(eth, np->eth_inst, rw_intr_mask); -+ eth_intr_mask.orun = regk_eth_no; -+ REG_WR(eth, np->eth_inst, rw_intr_mask, eth_intr_mask); -+ /* ACK overrun. */ -+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, 0x400); -+ -+ crisv32_eth_reset_rx_ring(dev); -+ reset: -+ /* TODO: if nr resets grows to high we should reboot. */ -+ if (resets++ > 0) -+ printk("reset DMA %d.\n", resets); -+ -+ DMA_RESET(np->dma_in_inst); -+ /* Wait for the channel to reset. */ -+ do { -+ stat = REG_RD(dma, np->dma_in_inst, rw_stat); -+ } while (stat.mode != regk_dma_rst); -+ -+ /* Now bring the rx path back up. */ -+ DMA_ENABLE(np->dma_in_inst); -+ if (dma_wait_busy(np->dma_in_inst, 100)) -+ goto reset; -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+// DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2); -+ dma_sc.cmd = (regk_dma_set_w_size2); -+ REG_WR(dma, np->dma_in_inst, rw_stream_cmd, dma_sc); -+ if (dma_wait_busy(np->dma_in_inst, 100)) -+ goto reset; -+#endif -+ -+// DMA_START_CONTEXT(np->dma_in_inst, virt_to_phys(&np->ctxt_in)); -+ REG_WR_INT(dma, np->dma_in_inst, rw_group_down, (int)&np->ctxt_in); -+ -+// DMA_WR_CMD(np->dma_in_inst, regk_dma_load_c); -+ dma_sc.cmd = (regk_dma_load_c); -+ REG_WR(dma, np->dma_in_inst, rw_stream_cmd, dma_sc); -+ if (dma_wait_busy(np->dma_in_inst, 100)) -+ goto reset; -+ -+// DMA_WR_CMD(np->dma_in_inst, regk_dma_load_d | regk_dma_burst); -+ dma_sc.cmd = (regk_dma_load_d | regk_dma_burst); -+ REG_WR(dma, np->dma_in_inst, rw_stream_cmd, dma_sc); -+ -+ if (dma_wait_busy(np->dma_in_inst, 100)) -+ goto reset; -+ -+ /* Now things get critical again. Don't give us any interrupts until -+ the following sequence is complete. */ -+ DMA_CONTINUE(np->dma_in_inst); -+ np->overrun_set = 0; -+ crisv32_enable_rx_ints(np); -+ crisv32_start_receiver(np); -+ -+ /* Reenable overrun interrupts when receive is started again. */ -+ eth_intr_mask = REG_RD(eth, np->eth_inst, rw_intr_mask); -+ eth_intr_mask.orun = regk_eth_yes; -+ REG_WR(eth, np->eth_inst, rw_intr_mask, eth_intr_mask); -+ -+ crisv32_connect_eth_rx_dma(np); -+} -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+static void -+crisv32_eth_restart_rx_dma(struct net_device* dev, -+ struct crisv32_ethernet_local *np) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&np->lock, flags); -+ __crisv32_eth_restart_rx_dma(dev, np); -+ spin_unlock_irqrestore(&np->lock, flags); -+} -+#endif -+ -+/* -+ * Is there work to do in the rx-path? -+ */ -+static inline int crisv32_has_rx_work(struct crisv32_ethernet_local *np, -+ dma_descr_data *active) -+{ -+ int mw; -+ mw = (active->in_eop && np->new_rx_package); -+ return mw; -+} -+ -+static void crisv32_eth_do_rx_recovery(struct net_device* dev, -+ struct crisv32_ethernet_local *np) -+{ -+ unsigned long flags; -+ static int r = 0; -+ -+ r++; -+ -+ /* Bring down the receiver. */ -+ spin_lock_irqsave(&np->lock, flags); -+ if (!np->do_rx_recovery) -+ goto done; -+ -+ napi_disable(&np->napi); -+ -+ np->rx_dma_timeouts++; -+ -+ __crisv32_eth_restart_rx_dma(dev, np); -+ -+ np->do_rx_recovery = 0; -+ -+ napi_enable(&np->napi); -+ done: -+ spin_unlock_irqrestore(&np->lock, flags); -+ -+ WARN_ON(r != 1); -+ r--; -+} -+ -+static void receive_timeout_work(struct work_struct* work) -+{ -+ struct dma_descr_data* descr; -+ struct dma_descr_data* descr2; -+ struct net_device* dev = crisv32_dev[0]; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ reg_eth_r_intr intr_mask; -+ -+ descr = &np->active_rx_desc->descr; -+ descr2 = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data)); -+ -+ intr_mask = REG_RD(eth, np->eth_inst, r_intr); -+ -+ if (!np->overrun_set -+ && !intr_mask.orun -+ && !descr->in_eop -+ && !descr2->in_eop) -+ return; -+ -+ crisv32_eth_do_rx_recovery(dev, np); -+} -+ -+static void receive_timeout(unsigned long arg) -+{ -+ struct net_device* dev = (struct net_device*)arg; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ np->do_rx_recovery++; -+ schedule_work(&np->receive_work); -+ mod_timer(&np->receive_timer, jiffies + 1*HZ); -+} -+ -+static void transmit_timeout(unsigned long arg) -+{ -+ struct net_device* dev = (struct net_device*)arg; -+ crisv32_eth_do_tx_recovery(dev); -+} -+ -+/* -+ * NAPI poll -+ * -+ * We are allowed to pull up to budget number of frames from the rx ring. -+ * If we are done, remove us from the poll list and re-enable rx interrupts. -+ * Always return number of pulled frames from the rx ring. -+ */ -+static int crisv32_eth_poll(struct napi_struct *napi, int budget) -+{ -+ struct crisv32_ethernet_local *np; -+ int work_done = 0; -+ int morework; -+ int rx_bytes = 0; -+ reg_dma_rw_ack_intr ack_intr = {0}; -+ -+ np = container_of(napi, struct crisv32_ethernet_local, napi); -+ crisv32_disable_eth_ints(np); -+ np->napi_processing = 1; -+ ack_intr.in_eop = 1; -+ -+ if (np->new_rx_package == 0) { -+ /* -+ * In the previous round we pulled a packet from the ring but -+ * we didn't advance the ring due to hw DMA bug. Try to do it -+ * now. -+ */ -+ np->new_rx_package = 1; -+ crisv32_eth_rx_ring_advance(np); -+ } -+ -+ morework = crisv32_has_rx_work(np, &np->active_rx_desc->descr); -+ -+ /* See if tx needs attention. */ -+ crisv32_tx_complete(np); -+ -+ while (morework) -+ { -+ rx_bytes += crisv32_eth_receive_packet(np->dev); -+ work_done++; -+ -+ /* Ack irq and restart rx dma */ -+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); -+ DMA_CONTINUE_DATA(np->dma_in_inst); -+ -+ if (unlikely(work_done >= budget)) -+ break; -+ -+ /* See if tx needs attention. */ -+ crisv32_tx_complete(np); -+ -+ morework = crisv32_has_rx_work(np, &np->active_rx_desc->descr); -+ } -+ crisv32_enable_eth_ints(np); -+ -+ if (!morework) { -+ np->napi_processing = 0; -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ if (np->pending_overrun) { -+ crisv32_eth_restart_rx_dma(np->dev, np); -+ } -+#endif -+ if (irqs_disabled()) -+ printk("WARNING: %s irqs disabled!\n", __func__); -+ -+ if (work_done < budget) { -+ /* first mark as done, then enable irq's */ -+ napi_complete(napi); -+ crisv32_enable_rx_ints(np); -+ crisv32_enable_tx_ints(np); -+ } -+ } -+ np->napi_processing = 0; -+ -+ np->stats.rx_bytes += rx_bytes; -+ np->stats.rx_packets += work_done; -+ update_rx_stats(np); -+ return work_done; -+} -+ -+/* -+ * This function (i.e. hard_start_xmit) is protected from concurent calls by a -+ * spinlock (xmit_lock) in the net_device structure. -+ */ -+static int -+crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ unsigned char *buf = skb->data; -+ unsigned long flags; -+ -+ /* -+ * Need to disable irq to avoid updating pointer in interrupt while -+ * sending packets. -+ */ -+ spin_lock_irqsave(&np->lock, flags); -+ -+ np->active_tx_desc->skb = skb; -+ crisv32_eth_hw_send_packet(buf, skb->len, np); -+ -+ dev->trans_start = jiffies; -+ -+ /* Stop queue if full. */ -+ if (crisv32_eth_tx_ring_full(np)) -+ netif_stop_queue(dev); -+ -+ np->txpackets++; -+ crisv32_eth_roll_tx_timer(np); -+ spin_unlock_irqrestore(&np->lock, flags); -+ -+ spin_lock_irqsave(&np->leds->led_lock, flags); -+ if (!np->leds->led_active && time_after(jiffies, -+ np->leds->led_next_time)) { -+ /* light the network leds depending on the current speed. */ -+ crisv32_set_network_leds(CRIS_LED_ACTIVITY, dev); -+ -+ /* Set the earliest time we may clear the LED */ -+ np->leds->led_next_time = jiffies + NET_FLASH_TIME; -+ np->leds->led_active = 1; -+ np->leds->clear_led_timer.data = (unsigned long) dev; -+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10); -+ } -+ spin_unlock_irqrestore(&np->leds->led_lock, flags); -+ -+ return 0; -+} -+ -+ -+static void -+crisv32_eth_hw_send_packet(unsigned char *buf, int length, void *priv) -+{ -+ struct crisv32_ethernet_local *np = -+ (struct crisv32_ethernet_local *) priv; -+ -+ /* Configure the tx dma descriptor. */ -+ np->active_tx_desc->descr.buf = (unsigned char *)virt_to_phys(buf); -+ -+ np->active_tx_desc->descr.after = np->active_tx_desc->descr.buf + -+ length; -+ np->active_tx_desc->descr.intr = 1; -+ np->active_tx_desc->descr.out_eop = 1; -+ -+ /* Move eol. */ -+ np->active_tx_desc->descr.eol = 1; -+ flush_dma_descr(&np->active_tx_desc->descr, 1); -+ -+ if (np->sender_started) -+ WARN_ON(!np->prev_tx_desc->descr.eol); -+ np->prev_tx_desc->descr.eol = 0; -+ flush_dma_descr(&np->prev_tx_desc->descr, 0); -+ -+ /* Update pointers. */ -+ np->prev_tx_desc = np->active_tx_desc; -+ np->active_tx_desc = phys_to_virt((int)np->active_tx_desc->descr.next); -+ -+ /* Start DMA. */ -+ crisv32_start_dma_out(np); -+} -+ -+static void crisv32_start_dma_out(struct crisv32_ethernet_local *np) -+{ -+ if (!np->sender_started) { -+ /* Start DMA for the first time. */ -+ np->ctxt_out.saved_data = -+ (void *)virt_to_phys(&np->prev_tx_desc->descr); -+ np->ctxt_out.saved_data_buf = np->prev_tx_desc->descr.buf; -+ WARN_ON(!np->ctxt_out.saved_data_buf); -+ -+ cris_flush_cache_range(&np->ctxt_out, sizeof np->ctxt_out); -+ REG_WR(dma, np->dma_out_inst, rw_group_down, -+ (int) virt_to_phys(&np->ctxt_out)); -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c); -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst); -+ np->sender_started = 1; -+ } else { -+ DMA_CONTINUE_DATA(np->dma_out_inst); -+ } -+} -+ -+/* -+ * Bring the transmitter back to life. -+ */ -+static void -+crisv32_eth_do_tx_recovery(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ reg_eth_rw_clr_err clr_err; -+ reg_dma_rw_stat stat = {0}; -+ unsigned long flags; -+ /* ACK urun and exc_col. */ -+ int ack_intr = 0x1800; -+ int do_full; -+ -+ /* Give the tx recovery some time without link state polling. */ -+ if (!np->fixed_phy) -+ mod_timer(&np->speed_timer, jiffies + 4 * HZ); -+ -+ np->tx_dma_restarts++; -+ -+ spin_lock_irqsave(&np->lock, flags); -+ -+ do_full = 1; -+ update_tx_stats(np); -+ -+ /* Cancel ongoing frame. */ -+ crisv32_eth_tx_cancel_frame(np); -+ -+ /* In case TR 125 just hit us. */ -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_ack_pkt); -+ dma_wait_busy(np->dma_out_inst, 100); -+ -+ /* At this point, the transmit block should be idle or waiting for us -+ to clear the excessive collision error. Let's reset the DMA. */ -+ DMA_STOP(np->dma_out_inst); -+ -+ crisv32_disconnect_eth_tx_dma(np); -+ -+ /* Eat from the tx ring. */ -+ _crisv32_tx_ring_advance(np, 1); -+ np->do_tx_recovery++; -+ -+ DMA_RESET(np->dma_out_inst); -+ do { -+ stat = REG_RD(dma, np->dma_out_inst, rw_stat); -+ } while (stat.mode != regk_dma_rst); -+ -+ /* Next packet will restart output DMA. */ -+ np->sender_started = 0; -+ -+ crisv32_enable_tx_ints(np); -+ -+ DMA_ENABLE(np->dma_out_inst); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4); -+#endif -+ DMA_CONTINUE(np->dma_out_inst); -+ -+ /* Clear pending errors. */ -+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr); -+ clr_err.clr = 1; -+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err); -+ -+ /* Do a full reset of the MAC block. */ -+ if (do_full) { -+ np->tx_mac_resets++; -+ crisv32_eth_reset(np); -+ } -+ -+ crisv32_connect_eth_tx_dma(np); -+ -+ if (np->txpackets) { -+ WARN_ON(!np->catch_tx_desc->skb); -+ np->catch_tx_desc->descr.intr = 1; -+ np->catch_tx_desc->descr.out_eop = 1; -+ -+ /* Start DMA for the first time. */ -+ np->ctxt_out.saved_data = -+ (void *)virt_to_phys(&np->catch_tx_desc->descr); -+ np->ctxt_out.saved_data_buf = np->catch_tx_desc->descr.buf; -+ WARN_ON(!np->ctxt_out.saved_data_buf); -+ flush_dma_descr(&np->catch_tx_desc->descr, 0); -+ cris_flush_cache_range(&np->ctxt_out, sizeof np->ctxt_out); -+ -+ REG_WR(dma, np->dma_out_inst, rw_group_down, -+ (int) virt_to_phys(&np->ctxt_out)); -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c); -+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst); -+ crisv32_eth_roll_tx_timer(np); -+ np->sender_started = 1; -+ } -+ -+ if (np->txpackets && crisv32_eth_tx_ring_full(np)) -+ netif_stop_queue(dev); -+ else -+ netif_wake_queue(dev); -+ -+ spin_unlock_irqrestore(&np->lock, flags); -+} -+ -+/* -+ * Set or clear the multicast filter for this adaptor. -+ * num_addrs == -1 Promiscuous mode, receive all packets -+ * num_addrs == 0 Normal mode, clear multicast list -+ * num_addrs > 0 Multicast mode, receive normal and MC packets, -+ * and do best-effort filtering. -+ */ -+static void crisv32_eth_set_rx_mode(struct net_device *dev) -+{ -+ int num_addr = netdev_mc_count(dev); -+ unsigned long int lo_bits; -+ unsigned long int hi_bits; -+ reg_eth_rw_rec_ctrl rec_ctrl = {0}; -+ reg_eth_rw_ga_lo ga_lo = {0}; -+ reg_eth_rw_ga_hi ga_hi = {0}; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ if (dev->flags & IFF_PROMISC) { -+ /* Promiscuous mode. */ -+ lo_bits = 0xfffffffful; -+ hi_bits = 0xfffffffful; -+ -+ /* Enable individual receive. */ -+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, -+ rw_rec_ctrl); -+ rec_ctrl.individual = regk_eth_yes; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } else if (dev->flags & IFF_ALLMULTI) { -+ /* Enable all multicasts. */ -+ lo_bits = 0xfffffffful; -+ hi_bits = 0xfffffffful; -+ -+ /* Disable individual receive */ -+ rec_ctrl = -+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.individual = regk_eth_no; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } else if (num_addr == 0) { -+ /* Normal, clear the mc list. */ -+ lo_bits = 0x00000000ul; -+ hi_bits = 0x00000000ul; -+ -+ /* Disable individual receive */ -+ rec_ctrl = -+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.individual = regk_eth_no; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } else { -+ /* MC mode, receive normal and MC packets. */ -+ char hash_ix; -+ struct netdev_hw_addr *ha; -+ char *baddr; -+ lo_bits = 0x00000000ul; -+ hi_bits = 0x00000000ul; -+ -+ netdev_for_each_mc_addr(ha, dev) { -+ /* Calculate the hash index for the GA registers. */ -+ hash_ix = 0; -+ baddr = ha->addr; -+ hash_ix ^= (*baddr) & 0x3f; -+ hash_ix ^= ((*baddr) >> 6) & 0x03; -+ ++baddr; -+ hash_ix ^= ((*baddr) << 2) & 0x03c; -+ hash_ix ^= ((*baddr) >> 4) & 0xf; -+ ++baddr; -+ hash_ix ^= ((*baddr) << 4) & 0x30; -+ hash_ix ^= ((*baddr) >> 2) & 0x3f; -+ ++baddr; -+ hash_ix ^= (*baddr) & 0x3f; -+ hash_ix ^= ((*baddr) >> 6) & 0x03; -+ ++baddr; -+ hash_ix ^= ((*baddr) << 2) & 0x03c; -+ hash_ix ^= ((*baddr) >> 4) & 0xf; -+ ++baddr; -+ hash_ix ^= ((*baddr) << 4) & 0x30; -+ hash_ix ^= ((*baddr) >> 2) & 0x3f; -+ -+ hash_ix &= 0x3f; -+ -+ if (hash_ix > 32) -+ hi_bits |= (1 << (hash_ix - 32)); -+ else -+ lo_bits |= (1 << hash_ix); -+ } -+ -+ /* Disable individual receive. */ -+ rec_ctrl = -+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl); -+ rec_ctrl.individual = regk_eth_no; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } -+ -+ ga_lo.table = (unsigned int) lo_bits; -+ ga_hi.table = (unsigned int) hi_bits; -+ -+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo); -+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi); -+} -+ -+static int -+crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -+{ -+ struct mii_ioctl_data *data = if_mii(ifr); -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int old_autoneg; -+ int rc = 0; -+ -+ spin_lock(&np->lock); /* Preempt protection */ -+ switch (cmd) { -+ case SET_ETH_ENABLE_LEDS: -+ np->use_leds = 1; -+ break; -+ case SET_ETH_DISABLE_LEDS: -+ np->use_leds = 0; -+ break; -+ case SET_ETH_AUTONEG: -+ old_autoneg = np->autoneg_normal; -+ np->autoneg_normal = *(int*)data; -+ if (np->autoneg_normal != old_autoneg) -+ crisv32_eth_negotiate(dev); -+ break; -+ default: -+ rc = generic_mii_ioctl(&np->mii_if, -+ if_mii(ifr), cmd, NULL); -+ break; -+ } -+ spin_unlock(&np->lock); -+ return rc; -+} -+ -+static int crisv32_eth_get_settings(struct net_device *dev, -+ struct ethtool_cmd *cmd) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int err; -+ -+ spin_lock_irq(&np->lock); -+ err = mii_ethtool_gset(&np->mii_if, cmd); -+ spin_unlock_irq(&np->lock); -+ -+ /* The PHY may support 1000baseT, but the EtraxFS does not. */ -+ cmd->supported &= ~(SUPPORTED_1000baseT_Half -+ | SUPPORTED_1000baseT_Full); -+ return err; -+} -+ -+static int crisv32_eth_set_settings(struct net_device *dev, -+ struct ethtool_cmd *ecmd) -+{ -+ if (ecmd->autoneg == AUTONEG_ENABLE) { -+ crisv32_eth_set_duplex(dev, autoneg); -+ crisv32_eth_set_speed(dev, 0); -+ } else { -+ crisv32_eth_set_duplex(dev, ecmd->duplex); -+ crisv32_eth_set_speed(dev, ecmd->speed); -+ } -+ -+ return 0; -+} -+ -+static void crisv32_eth_get_drvinfo(struct net_device *dev, -+ struct ethtool_drvinfo *info) -+{ -+#ifdef CONFIG_ETRAXFS -+ strncpy(info->driver, "ETRAX FS", sizeof(info->driver) - 1); -+#else -+ strncpy(info->driver, "ARTPEC-3", sizeof(info->driver) - 1); -+#endif -+ strncpy(info->version, "$Revision: 1.197 $", sizeof(info->version) - 1); -+ strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1); -+ strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1); -+} -+ -+static int crisv32_eth_get_ethtool_sset_count(struct net_device *dev, -+ int stringset) -+{ -+ if (stringset != ETH_SS_STATS) -+ return -EINVAL; -+ -+ return ARRAY_SIZE(ethtool_stats_keys); -+} -+ -+static void crisv32_eth_get_ethtool_stats(struct net_device *dev, -+ struct ethtool_stats *stats, -+ u64 *data) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data[0] = np->tx_dma_restarts; -+ data[1] = np->tx_mac_resets; -+ data[2] = np->rx_dma_restarts; -+ data[3] = np->rx_dma_timeouts; -+ data[4] = np->rx_restarts_dropped; -+} -+ -+static void crisv32_eth_get_strings(struct net_device *dev, -+ u32 stringset, u8 *data) -+{ -+ switch (stringset) { -+ case ETH_SS_STATS: -+ memcpy(data, ðtool_stats_keys, -+ sizeof(ethtool_stats_keys)); -+ break; -+ default: -+ WARN_ON(1); -+ break; -+ } -+} -+ -+static int crisv32_eth_nway_reset(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ if (np->current_duplex == autoneg && np->current_speed_selection == 0) -+ crisv32_eth_negotiate(dev); -+ return 0; -+} -+/* The FS/A3 ethernet block has 23 32-bit config registers. */ -+/* plus 2 dma_descr_context */ -+/* plus 2 sets of ring pointers (active, prev, last) */ -+/* plus 2 sets of DMA registers 40*4 bytes = 0xA0 */ -+#define ETRAX_ETH_REGDUMP_LEN (23 * 4 + 2 * sizeof (dma_descr_context) + 2*3*4 + 2*0xA0) -+static int crisv32_eth_get_regs_len(struct net_device *dev) -+{ -+ return ETRAX_ETH_REGDUMP_LEN; -+} -+ -+static void crisv32_eth_get_regs(struct net_device *dev, -+ struct ethtool_regs *regs, void *_p) -+{ -+ u32 *p = _p; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int i; -+ -+ /* Let's call this major version 0, minor version 1 with some -+ * undecided field separation in the version data. Previously -+ * only the eth regs were dumped (version=0: maj 0, min 0).*/ -+ regs->version = 1; -+ memset(p, 0, ETRAX_ETH_REGDUMP_LEN); -+ -+#define GET_REG32_LOOP(base, len) \ -+ do { \ -+ for (i = 0; i < len; i += 4) \ -+ *(p)++ = REG_READ(u32, (base) + i); \ -+ } while (0) -+ -+ GET_REG32_LOOP(np->eth_inst, 0x30); -+ /* Do not dump registers with read side effects. */ -+ GET_REG32_LOOP(np->eth_inst + 0x34, 1); -+ GET_REG32_LOOP(np->eth_inst + 0x3c, 1); -+ GET_REG32_LOOP(np->eth_inst + 0x44, 0x5c - 0x44); -+ -+ -+ memcpy(p, &np->ctxt_out, sizeof (dma_descr_context)); -+ p += sizeof (dma_descr_context)/4; -+ *(p++) = (u32) np->active_tx_desc; -+ *(p++) = (u32) np->prev_tx_desc; -+ *(p++) = (u32) np->catch_tx_desc; -+ -+ GET_REG32_LOOP(np->dma_out_inst, 0xa0); -+ -+ memcpy(p, &np->ctxt_in, sizeof (dma_descr_context)); -+ p += sizeof (dma_descr_context)/4; -+ *(p++) = (u32)np->active_rx_desc; -+ *(p++) = (u32)np->prev_rx_desc; -+ *(p++) = (u32)np->last_rx_desc; -+ -+ GET_REG32_LOOP(np->dma_in_inst, 0xa0); -+#undef GET_REG32_LOOP -+} -+ -+static struct ethtool_ops crisv32_ethtool_ops = { -+ .get_settings = crisv32_eth_get_settings, -+ .set_settings = crisv32_eth_set_settings, -+ .get_drvinfo = crisv32_eth_get_drvinfo, -+ .get_regs_len = crisv32_eth_get_regs_len, -+ .get_regs = crisv32_eth_get_regs, -+ .nway_reset = crisv32_eth_nway_reset, -+ .get_link = ethtool_op_get_link, -+ .get_strings = crisv32_eth_get_strings, -+ .get_ethtool_stats = crisv32_eth_get_ethtool_stats, -+ .get_sset_count = crisv32_eth_get_ethtool_sset_count -+}; -+ -+/* Is this function really needed? Use ethtool instead? */ -+static int crisv32_eth_set_config(struct net_device *dev, struct ifmap *map) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->lock); /* Preempt protection */ -+ -+ switch (map->port) { -+ case IF_PORT_UNKNOWN: -+ /* Use autoneg */ -+ crisv32_eth_set_speed(dev, 0); -+ crisv32_eth_set_duplex(dev, autoneg); -+ break; -+ case IF_PORT_10BASET: -+ crisv32_eth_set_speed(dev, 10); -+ crisv32_eth_set_duplex(dev, autoneg); -+ break; -+ case IF_PORT_100BASET: -+ case IF_PORT_100BASETX: -+ crisv32_eth_set_speed(dev, 100); -+ crisv32_eth_set_duplex(dev, autoneg); -+ break; -+ case IF_PORT_100BASEFX: -+ case IF_PORT_10BASE2: -+ case IF_PORT_AUI: -+ spin_unlock(&np->lock); -+ return -EOPNOTSUPP; -+ break; -+ default: -+ printk(KERN_ERR "%s: Invalid media selected", -+ dev->name); -+ spin_unlock(&np->lock); -+ return -EINVAL; -+ } -+ spin_unlock(&np->lock); -+ return 0; -+} -+ -+static void crisv32_eth_negotiate(struct net_device *dev) -+{ -+ unsigned short data; -+ unsigned short ctrl1000; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE); -+ ctrl1000 = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MII_CTRL1000); -+ -+ /* Make all capabilities available */ -+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL | -+ ADVERTISE_100HALF | ADVERTISE_100FULL; -+ ctrl1000 |= ADVERTISE_1000HALF | ADVERTISE_1000FULL; -+ -+ /* Remove the speed capabilities that we that do not want */ -+ switch (np->current_speed_selection) { -+ case 10 : -+ data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL); -+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); -+ break; -+ case 100 : -+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL); -+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); -+ break; -+ case 1000 : -+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL | -+ ADVERTISE_100HALF | ADVERTISE_100FULL); -+ break; -+ } -+ -+ /* Remove the duplex capabilites that we do not want */ -+ if (np->current_duplex == full) { -+ data &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF); -+ ctrl1000 &= ~(ADVERTISE_1000HALF); -+ } -+ else if (np->current_duplex == half) { -+ data &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL); -+ ctrl1000 &= ~(ADVERTISE_1000FULL); -+ } -+ -+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, -+ MII_CTRL1000, ctrl1000); -+#endif -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR); -+ if (np->autoneg_normal) { -+ /* Renegotiate with link partner */ -+ data |= BMCR_ANENABLE | BMCR_ANRESTART; -+ } else { -+ /* Don't negitiate speed or duplex */ -+ data &= ~(BMCR_ANENABLE | BMCR_ANRESTART); -+ -+ /* Set speed and duplex static */ -+ if (np->current_speed_selection == 10) { -+ data &= ~(BMCR_SPEED100 | BMCR_SPEED1000); -+ } -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ else if (np->current_speed_selection == 1000) { -+ data &= ~BMCR_SPEED100; -+ data |= BMCR_SPEED1000; -+ } -+#endif -+ else { -+ data |= BMCR_SPEED100; -+ data &= ~BMCR_SPEED1000; -+ } -+ -+ if (np->current_duplex != full) { -+ data &= ~BMCR_FULLDPLX; -+ } else { -+ data |= BMCR_FULLDPLX; -+ } -+ } -+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data); -+} -+ -+static void crisv32_eth_check_speed(unsigned long idev) -+{ -+#ifndef CONFIG_ETRAX_NO_PHY -+ static int led_initiated = 0; -+ struct net_device *dev = (struct net_device *) idev; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ unsigned long data; -+ int old_speed; -+ unsigned long flags; -+ -+ BUG_ON(!np); -+ BUG_ON(!np->transceiver); -+ -+ spin_lock(&np->transceiver_lock); -+ -+ old_speed = np->current_speed; -+ -+ /* Do a fake read. This is needed for DM9161, otherwise the link will -+ * go up and down all the time. -+ */ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR); -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR); -+ -+ if (!(data & BMSR_LSTATUS)) -+ np->current_speed = 0; -+ else -+ np->transceiver->check_speed(dev); -+ -+ spin_lock_irqsave(&np->leds->led_lock, flags); -+ if ((old_speed != np->current_speed) || !led_initiated) { -+ led_initiated = 1; -+ np->leds->clear_led_timer.data = (unsigned long) dev; -+ if (np->current_speed) { -+ if (!np->link) -+ netif_carrier_on(dev); -+ crisv32_set_network_leds(CRIS_LED_LINK, dev); -+ np->link = 1; -+ } else { -+ if (np->link) -+ netif_carrier_off(dev); -+ crisv32_set_network_leds(CRIS_LED_NOLINK, dev); -+ np->link = 0; -+ } -+ } -+ spin_unlock_irqrestore(&np->leds->led_lock, flags); -+ -+ /* Reinitialize the timer. */ -+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; -+ add_timer(&np->speed_timer); -+ -+ spin_unlock(&np->transceiver_lock); -+#endif -+} -+ -+static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ spin_lock(&np->transceiver_lock); -+ if (np->current_speed_selection != speed) { -+ np->current_speed_selection = speed; -+ crisv32_eth_negotiate(dev); -+ } -+ spin_unlock(&np->transceiver_lock); -+} -+ -+static void crisv32_eth_check_duplex(unsigned long idev) -+{ -+#ifndef CONFIG_ETRAX_NO_PHY -+ struct net_device *dev = (struct net_device *) idev; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ reg_eth_rw_rec_ctrl rec_ctrl; -+ int old_duplex = np->full_duplex; -+ -+ np->transceiver->check_duplex(dev); -+ -+ if (old_duplex != np->full_duplex) { -+ /* Duplex changed. */ -+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, -+ rw_rec_ctrl); -+ rec_ctrl.duplex = np->full_duplex; -+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); -+ } -+ -+ /* Reinitialize the timer. */ -+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; -+ add_timer(&np->duplex_timer); -+#endif -+} -+ -+static void -+crisv32_eth_set_duplex(struct net_device *dev, enum duplex new_duplex) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ spin_lock(&np->transceiver_lock); -+ if (np->current_duplex != new_duplex) { -+ np->current_duplex = new_duplex; -+ crisv32_eth_negotiate(dev); -+ } -+ spin_unlock(&np->transceiver_lock); -+} -+ -+static int crisv32_eth_probe_transceiver(struct net_device *dev) -+{ -+#ifndef CONFIG_ETRAX_NO_PHY -+ unsigned int phyid_high; -+ unsigned int phyid_low; -+ unsigned int oui; -+ struct transceiver_ops *ops = NULL; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ /* Probe MDIO physical address. */ -+ for (np->mii_if.phy_id = 0; -+ np->mii_if.phy_id <= 31; np->mii_if.phy_id++) { -+ if (crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR) -+ != 0xffff) -+ break; -+ } -+ -+ if (np->mii_if.phy_id == 32) -+ return -ENODEV; -+ -+ /* Get manufacturer. */ -+ phyid_high = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MII_PHYSID1); -+ phyid_low = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MII_PHYSID2); -+ -+ oui = (phyid_high << 6) | (phyid_low >> 10); -+ -+ for (ops = &transceivers[0]; ops->oui; ops++) { -+ if (ops->oui == oui) -+ break; -+ } -+ -+ np->transceiver = ops; -+ -+ if (oui == DM9161_OUI) { -+ /* Do not bypass the scrambler/descrambler, this is needed -+ * to make 10Mbit work. -+ */ -+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, -+ MII_DM9161_SCR,MII_DM9161_SCR_INIT); -+ /* Clear 10BTCSR to default */ -+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, -+ MII_DM9161_10BTCSR, -+ MII_DM9161_10BTCSR_INIT); -+ } -+ return 0; -+#else -+ return -ENODEV; -+#endif -+} -+ -+#ifndef CONFIG_ETRAX_NO_PHY -+static void generic_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE); -+ if ((data & ADVERTISE_100FULL) || -+ (data & ADVERTISE_100HALF)) -+ np->current_speed = 100; -+ else -+ np->current_speed = 10; -+} -+ -+static void generic_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE); -+ if ((data & ADVERTISE_10FULL) || -+ (data & ADVERTISE_100FULL)) -+ np->full_duplex = 1; -+ else -+ np->full_duplex = 0; -+} -+ -+static void broadcom_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_AUX_CTRL_STATUS_REG); -+ np->current_speed = (data & MDIO_BC_SPEED ? 100 : 10); -+} -+ -+static void broadcom_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_AUX_CTRL_STATUS_REG); -+ np->full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0; -+} -+ -+static void tdk_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_TDK_DIAGNOSTIC_REG); -+ np->current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10); -+} -+ -+static void tdk_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_TDK_DIAGNOSTIC_REG); -+ np->full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0; -+ -+} -+ -+static void intel_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_INT_STATUS_REG_2); -+ np->current_speed = (data & MDIO_INT_SPEED ? 100 : 10); -+} -+ -+static void intel_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_INT_STATUS_REG_2); -+ np->full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0; -+} -+ -+static void national_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_NAT_LINK_AN_REG); -+ if (data & MDIO_NAT_1000) -+ np->current_speed = 1000; -+ else if (data & MDIO_NAT_100) -+ np->current_speed = 100; -+ else -+ np->current_speed = 10; -+} -+ -+static void national_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_NAT_LINK_AN_REG); -+ if (data & MDIO_NAT_FULL_DUPLEX_IND) -+ np->full_duplex = 1; -+ else -+ np->full_duplex = 0; -+} -+ -+static void vitesse_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_VIT_AUX_STAT); -+ if ((data & 0x18) == MDIO_VIT_1000) -+ np->current_speed = 1000; -+ else if ((data & 0x18) == MDIO_VIT_100) -+ np->current_speed = 100; -+ else -+ np->current_speed = 10; -+} -+ -+static void vitesse_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MDIO_VIT_AUX_STAT); -+ if (data & 0x20) -+ np->full_duplex = 1; -+ else -+ np->full_duplex = 0; -+} -+ -+static void davicom_check_speed(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR); -+ np->current_speed = (data & BMCR_SPEED100) ? 100 : 10; -+} -+ -+static void davicom_check_duplex(struct net_device *dev) -+{ -+ unsigned long data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR); -+ np->full_duplex = (data & BMCR_FULLDPLX) ? 1 : 0; -+} -+#endif -+ -+#if 0 -+static void crisv32_eth_reset_tranceiver(struct net_device *dev) -+{ -+ int i; -+ unsigned short cmd; -+ unsigned short data; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR); -+ -+ cmd = (MDIO_START << 14) -+ | (MDIO_WRITE << 12) -+ | (np->mii_if.phy_id << 7) -+ | (MII_BMCR << 2); -+ -+ crisv32_eth_send_mdio_cmd(dev, cmd, 1); -+ -+ data |= 0x8000; -+ -+ /* Magic value is number of bits. */ -+ for (i = 15; i >= 0; i--) -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data)); -+} -+#endif -+ -+static int -+crisv32_eth_get_mdio_reg(struct net_device *dev, int phyid, int reg_num) -+{ -+ int i; -+ unsigned short cmd; /* Data to be sent on MDIO port. */ -+ unsigned short data; /* Data read from MDIO. */ -+ -+#ifdef CONFIG_ETRAX_NO_PHY -+ return 0; -+#endif -+ -+ /* Start of frame, OP Code, Physical Address, Register Address. */ -+ cmd = (MDIO_START << 14) -+ | (MDIO_READ << 12) -+ | (phyid << 7) -+ | (reg_num << 2); -+ -+ crisv32_eth_send_mdio_cmd(dev, cmd, 0); -+ -+ data = 0; -+ -+ /* Receive data. Magic value is number of bits. */ -+ for (i = 15; i >= 0; i--) -+ data |= (crisv32_eth_receive_mdio_bit(dev) << i); -+ -+ return data; -+} -+ -+static void -+crisv32_eth_set_mdio_reg(struct net_device *dev, int phyid, int reg, int value) -+{ -+ int bitCounter; -+ unsigned short cmd; -+ -+#ifdef CONFIG_ETRAX_NO_PHY -+ return; -+#endif -+ cmd = (MDIO_START << 14) -+ | (MDIO_WRITE << 12) -+ | (phyid << 7) -+ | (reg << 2); -+ -+ crisv32_eth_send_mdio_cmd(dev, cmd, 1); -+ -+ /* Data... */ -+ for (bitCounter=15; bitCounter>=0 ; bitCounter--) { -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(bitCounter, value)); -+ } -+} -+ -+static void -+crisv32_eth_send_mdio_cmd(struct net_device *dev, unsigned short cmd, -+ int write_cmd) -+{ -+ int i; -+ unsigned char data = 0x2; -+ -+ /* Preamble. Magic value is number of bits. */ -+ for (i = 31; i >= 0; i--) -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, MDIO_PREAMBLE)); -+ -+ for (i = 15; i >= 2; i--) -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, cmd)); -+ -+ /* Turnaround. */ -+ for (i = 1; i >= 0; i--) -+ if (write_cmd) -+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data)); -+ else -+ crisv32_eth_receive_mdio_bit(dev); -+} -+ -+static void crisv32_eth_send_mdio_bit(struct net_device *dev, unsigned char bit) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ reg_eth_rw_mgm_ctrl mgm_ctrl = { -+ .mdoe = regk_eth_yes, -+ .mdio = bit & 1 -+ }; -+ -+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); -+ -+ udelay(1); -+ -+ mgm_ctrl.mdc = 1; -+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); -+ -+ udelay(1); -+} -+ -+static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev) -+{ -+ reg_eth_r_stat stat; -+ reg_eth_rw_mgm_ctrl mgm_ctrl = {0}; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ -+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); -+ stat = REG_RD(eth, np->eth_inst, r_stat); -+ -+ udelay(1); -+ -+ mgm_ctrl.mdc = 1; -+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); -+ -+ udelay(1); -+ return stat.mdio; -+} -+ -+static void crisv32_clear_network_leds(unsigned long priv) -+{ -+ struct net_device *dev = (struct net_device *)priv; -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&np->leds->led_lock, flags); -+ if (np->leds->led_active && time_after(jiffies, -+ np->leds->led_next_time)) { -+ crisv32_set_network_leds(CRIS_LED_NOACTIVITY, dev); -+ -+ /* Set the earliest time we may set the LED */ -+ np->leds->led_next_time = jiffies + NET_FLASH_PAUSE; -+ np->leds->led_active = 0; -+ } -+ spin_unlock_irqrestore(&np->leds->led_lock, flags); -+} -+ -+static void crisv32_set_network_leds(int active, struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ int light_leds = 0; -+ -+ if (np->leds->ledgrp == CRIS_LED_GRP_NONE) -+ return; -+ -+ if (!np->use_leds) -+ return; -+ -+ if (active == CRIS_LED_NOLINK) { -+ if (dev == crisv32_dev[0]) -+ np->leds->ifisup[0] = 0; -+ else -+ np->leds->ifisup[1] = 0; -+ } -+ else if (active == CRIS_LED_LINK) { -+ if (dev == crisv32_dev[0]) -+ np->leds->ifisup[0] = 1; -+ else -+ np->leds->ifisup[1] = 1; -+#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK) -+ light_leds = 1; -+ } else { -+ light_leds = (active == CRIS_LED_NOACTIVITY); -+#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY) -+ light_leds = 0; -+ } else { -+ light_leds = (active == CRIS_LED_ACTIVITY); -+#else -+#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY" -+#endif -+ } -+ -+ if (!np->current_speed) { -+ /* Set link down if none of the interfaces that use this led -+ group is up */ -+ if ((np->leds->ifisup[0] + np->leds->ifisup[1]) == 0) { -+#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION) -+ /* Make LED red, link is down */ -+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_RED); -+#else -+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_OFF); -+#endif -+ } -+ } else if (light_leds) { -+ if (np->current_speed == 10) -+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_ORANGE); -+ else -+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_GREEN); -+ } else -+ NET_LED_SET(np->leds->ledgrp, CRIS_LED_OFF); -+} -+ -+#ifdef CONFIG_NET_POLL_CONTROLLER -+static void crisv32_netpoll(struct net_device *netdev) -+{ -+ crisv32rx_eth_interrupt(DMA0_INTR_VECT, netdev); -+} -+#endif -+ -+#ifdef CONFIG_CPU_FREQ -+static int crisv32_ethernet_freq_notifier(struct notifier_block *nb, -+ unsigned long val, void *data) -+{ -+ struct cpufreq_freqs *freqs = data; -+ int i; -+ if (val != CPUFREQ_POSTCHANGE) -+ return 0; -+ -+ for (i = 0; i < 2; i++) { -+ struct net_device *dev = crisv32_dev[i]; -+ unsigned short data; -+ if (dev == NULL) -+ continue; -+ -+ data = crisv32_eth_get_mdio_reg(dev, np->mii_if.phy_id, -+ MII_BMCR); -+ if (freqs->new == 200000) -+ data &= ~BMCR_PDOWN; -+ else -+ data |= BMCR_PDOWN; -+ crisv32_eth_set_mdio_reg(dev, np->mii_if.phy_id, -+ MII_BMCR, data); -+ } -+ return 0; -+} -+#endif -+ -+#if 0 -+/* -+ * Must be called with the np->lock held. -+ */ -+static void crisv32_ethernet_bug(struct net_device *dev) -+{ -+ struct crisv32_ethernet_local *np = netdev_priv(dev); -+ dma_descr_data *dma_pos; -+ dma_descr_data *in_dma_pos; -+ reg_dma_rw_stat stat = {0}; -+ reg_dma_rw_stat in_stat = {0}; -+ int i; -+ -+ /* Get the current output dma position. */ -+ stat = REG_RD(dma, np->dma_out_inst, rw_stat); -+ -+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data)); -+ in_dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data)); -+ in_stat = REG_RD(dma, np->dma_in_inst, rw_stat); -+ -+ printk("%s:\n" -+ "stat.list_state=%x\n" -+ "stat.mode=%x\n" -+ "stat.stream_cmd_src=%x\n" -+ "dma_pos=%x\n" -+ "tx catch=%x active=%x\n" -+ "packets=%d queue=%d sender_started=%d\n" -+ "intr_vect.r_vect=%x\n" -+ "dma.r_masked_intr=%x dma.rw_ack_intr=%x " -+ "dma.r_intr=%x dma.rw_intr_masked=%x\n" -+ "eth.r_stat=%x\n", -+ __func__, -+ stat.list_state, stat.mode, stat.stream_cmd_src, -+ (unsigned int)dma_pos, -+ (unsigned int)&np->catch_tx_desc->descr, -+ (unsigned int)&np->active_tx_desc->descr, -+ np->txpackets, -+ netif_queue_stopped(dev), np->sender_started, -+ REG_RD_INT(intr_vect, regi_irq, r_vect), -+ REG_RD_INT(dma, np->dma_out_inst, r_masked_intr), -+ REG_RD_INT(dma, np->dma_out_inst, rw_ack_intr), -+ REG_RD_INT(dma, np->dma_out_inst, r_intr), -+ REG_RD_INT(dma, np->dma_out_inst, rw_intr_mask), -+ REG_RD_INT(eth, np->eth_inst, r_stat)); -+ -+ printk("in_stat.list_state=%x\n" -+ "in_stat.mode=%x\n" -+ "in_stat.stream_cmd_src=%x\n" -+ "in_dma_pos=%x\n" -+ "rx last=%x prev=%x active=%x\n", -+ in_stat.list_state, in_stat.mode, in_stat.stream_cmd_src, -+ (unsigned int)in_dma_pos, -+ (unsigned int)&np->last_rx_desc->descr, -+ (unsigned int)&np->prev_rx_desc->descr, -+ (unsigned int)&np->active_rx_desc->descr); -+ -+#if 0 -+ printk("rx-descriptors:\n"); -+ for (i = 0; i < NBR_RX_DESC; i++) { -+ printk("rxdesc[%d]=0x%x\n", i, (unsigned int) -+ virt_to_phys(&np->dma_rx_descr_list[i].descr)); -+ printk("rxdesc[%d].skb=0x%x\n", i, -+ (unsigned int)np->dma_rx_descr_list[i].skb); -+ printk("rxdesc[%d].buf=0x%x\n", i, -+ (unsigned int)np->dma_rx_descr_list[i].descr.buf); -+ printk("rxdesc[%d].after=0x%x\n", i, -+ (unsigned int)np->dma_rx_descr_list[i].descr.after); -+ printk("rxdesc[%d].intr=%x\n", i, -+ np->dma_rx_descr_list[i].descr.intr); -+ printk("rxdesc[%d].eol=%x\n", i, -+ np->dma_rx_descr_list[i].descr.eol); -+ printk("rxdesc[%d].out_eop=%x\n", i, -+ np->dma_rx_descr_list[i].descr.out_eop); -+ printk("rxdesc[%d].in_eop=%x\n", i, -+ np->dma_rx_descr_list[i].descr.in_eop); -+ printk("rxdesc[%d].wait=%x\n", i, -+ np->dma_rx_descr_list[i].descr.wait); -+ } -+#endif -+ -+#if 1 -+ printk("tx-descriptors:\n"); -+ for (i = 0; i < NBR_TX_DESC; i++) { -+ printk("txdesc[%d]=0x%x\n", i, (unsigned int) -+ virt_to_phys(&np->dma_tx_descr_list[i].descr)); -+ printk("txdesc[%d].skb=0x%x\n", i, -+ (unsigned int)np->dma_tx_descr_list[i].skb); -+ printk("txdesc[%d].buf=0x%x\n", i, -+ (unsigned int)np->dma_tx_descr_list[i].descr.buf); -+ printk("txdesc[%d].after=0x%x\n", i, -+ (unsigned int)np->dma_tx_descr_list[i].descr.after); -+ printk("txdesc[%d].intr=%x\n", i, -+ np->dma_tx_descr_list[i].descr.intr); -+ printk("txdesc[%d].eol=%x\n", i, -+ np->dma_tx_descr_list[i].descr.eol); -+ printk("txdesc[%d].out_eop=%x\n", i, -+ np->dma_tx_descr_list[i].descr.out_eop); -+ printk("txdesc[%d].in_eop=%x\n", i, -+ np->dma_tx_descr_list[i].descr.in_eop); -+ printk("txdesc[%d].wait=%x\n", i, -+ np->dma_tx_descr_list[i].descr.wait); -+ } -+#endif -+} -+#endif -+ -+static int __init crisv32_boot_setup(char *str) -+{ -+ struct sockaddr sa = {0}; -+ int i; -+ -+ /* Parse the colon separated Ethernet station address */ -+ for (i = 0; i < ETH_ALEN; i++) { -+ unsigned int tmp; -+ if (sscanf(str + 3*i, "%2x", &tmp) != 1) { -+ printk(KERN_WARNING "Malformed station address"); -+ return 0; -+ } -+ sa.sa_data[i] = (char)tmp; -+ } -+ -+ default_mac_iface0 = sa; -+ return 1; -+} -+ -+__setup("crisv32_eth=", crisv32_boot_setup); -+ -+module_init(crisv32_ethernet_init); -diff --git a/drivers/net/cris/eth_v32.h b/drivers/net/cris/eth_v32.h -new file mode 100644 -index 0000000..b6b0c7c ---- /dev/null -+++ b/drivers/net/cris/eth_v32.h -@@ -0,0 +1,297 @@ -+/* -+ * Definitions for ETRAX FS ethernet driver. -+ * -+ * Copyright (C) 2003, 2004, 2005 Axis Communications. -+ */ -+ -+#ifndef _ETRAX_ETHERNET_H_ -+#define _ETRAX_ETHERNET_H_ -+ -+#include -+ -+#define MAX_MEDIA_DATA_SIZE 1522 /* Max packet size. */ -+ -+#define NBR_RX_DESC 128 /* Number of RX descriptors. */ -+#define NBR_TX_DESC 16 /* Number of TX descriptors. */ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+#define NBR_INTMEM_RX_DESC 16 /* Number of RX descriptors in int. mem. -+ * when running in gigabit mode. -+ * Should be less then NBR_RX_DESC -+ */ -+#define NBR_INTMEM_TX_BUF 4 /* Number of TX buffers in int. mem -+ * when running in gigabit mode. -+ * Should be less than NBR_TX_DESC -+ */ -+#endif -+ -+/* Large packets are sent directly to upper layers while small packets -+ * are copied (to reduce memory waste). The following constant -+ * decides the breakpoint. -+ */ -+#define RX_COPYBREAK (256) -+ -+#define ETHER_HEAD_LEN (14) -+ -+/* -+ * MDIO constants. -+ */ -+#define MDIO_START 0x1 -+#define MDIO_READ 0x2 -+#define MDIO_WRITE 0x1 -+#define MDIO_PREAMBLE 0xfffffffful -+ -+/* Broadcom specific */ -+#define MDIO_AUX_CTRL_STATUS_REG 0x18 -+#define MDIO_BC_FULL_DUPLEX_IND 0x1 -+#define MDIO_BC_SPEED 0x2 -+ -+/* TDK specific */ -+#define MDIO_TDK_DIAGNOSTIC_REG 18 -+#define MDIO_TDK_DIAGNOSTIC_RATE 0x400 -+#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800 -+ -+/*Intel LXT972A specific*/ -+#define MDIO_INT_STATUS_REG_2 0x0011 -+#define MDIO_INT_FULL_DUPLEX_IND ( 0x0001 << 9 ) -+#define MDIO_INT_SPEED ( 0x0001 << 14 ) -+ -+/*National Semiconductor DP83865 specific*/ -+#define MDIO_NAT_LINK_AN_REG 0x11 -+#define MDIO_NAT_1000 (0x0001 << 4) -+#define MDIO_NAT_100 (0x0001 << 3) -+#define MDIO_NAT_FULL_DUPLEX_IND (0x0001 << 1) -+ -+/* Vitesse VCS8641 specific */ -+#define MDIO_VIT_AUX_STAT 0x1c -+#define MDIO_VIT_1000 (0x2 << 3) -+#define MDIO_VIT_100 (0x1 << 3) -+#define MDIO_VIT_10 0 -+#define MDIO_VIT_FD (0x1 << 5) -+ -+/* Davicom DM9161 specific */ -+#define DM9161_OUI 0x606E -+#define MII_DM9161_SCR 0x10 -+#define MII_DM9161_SCR_INIT 0x0610 -+#define MII_DM9161_SCR_RMII 0x0100 -+#define MII_DM9161_10BTCSR 0x12 -+#define MII_DM9161_10BTCSR_INIT 0x7800 -+ -+/* Network flash constants */ -+#define NET_FLASH_TIME (HZ/50) /* 20 ms */ -+#define NET_FLASH_PAUSE (HZ/100) /* 10 ms */ -+#define NET_LINK_UP_CHECK_INTERVAL (2*HZ) /* 2 seconds. */ -+#define NET_DUPLEX_CHECK_INTERVAL (2*HZ) /* 2 seconds. */ -+ -+/* Duplex settings. */ -+enum duplex { -+ half, -+ full, -+ autoneg -+}; -+ -+/* Some transceivers requires special handling. */ -+struct transceiver_ops { -+ unsigned int oui; -+ void (*check_speed) (struct net_device * dev); -+ void (*check_duplex) (struct net_device * dev); -+}; -+ -+typedef struct crisv32_eth_descr { -+ dma_descr_data descr __attribute__ ((__aligned__(32))); -+ struct sk_buff *skb; -+ unsigned char *linearized_packet; -+} crisv32_eth_descr; -+ -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+struct tx_buffer_list { -+ struct tx_buffer_list *next; -+ unsigned char *buf; -+ char free; -+}; -+#endif -+ -+/* LED stuff */ -+#define CRIS_LED_GRP_0 0 -+#define CRIS_LED_GRP_1 1 -+#define CRIS_LED_GRP_NONE 2 -+ -+#define CRIS_LED_ACTIVITY 0 -+#define CRIS_LED_NOACTIVITY 1 -+#define CRIS_LED_LINK 2 -+#define CRIS_LED_NOLINK 3 -+ -+struct crisv32_eth_leds { -+ unsigned int ledgrp; -+ int led_active; -+ unsigned long led_next_time; -+ struct timer_list clear_led_timer; -+ spinlock_t led_lock; /* Protect LED state */ -+ int ifisup[2]; -+}; -+ -+#define NET_LED_SET(x,y) \ -+ do { \ -+ if (x == 0) CRIS_LED_NETWORK_GRP0_SET(y); \ -+ if (x == 1) CRIS_LED_NETWORK_GRP1_SET(y); \ -+ } while (0) -+ -+/* Information that need to be kept for each device. */ -+struct crisv32_ethernet_local { -+ /* FIXME: These align attributes don't really help. If they are really -+ * needed alignment has to be enforced at runtime, these objects -+ * are dynamically allocated. */ -+ dma_descr_context ctxt_in __attribute__ ((__aligned__(32))); -+ dma_descr_context ctxt_out __attribute__ ((__aligned__(32))); -+ -+ crisv32_eth_descr dma_rx_descr_list[NBR_RX_DESC]; -+ crisv32_eth_descr dma_tx_descr_list[NBR_TX_DESC]; -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+ struct tx_buffer_list tx_intmem_buf_list[NBR_INTMEM_TX_BUF]; -+ struct tx_buffer_list *intmem_tx_buf_active; -+ struct tx_buffer_list *intmem_tx_buf_catch; -+ int gigabit_mode; -+#endif -+ /* Transmit data path. */ -+ int dma_out_inst; -+ int sender_started; -+ -+ /* TX-ring state. */ -+ crisv32_eth_descr *active_tx_desc; -+ crisv32_eth_descr *prev_tx_desc; -+ crisv32_eth_descr *catch_tx_desc; -+ int txpackets; -+ int retrans; -+ int do_tx_recovery; -+ struct timer_list transmit_timer; -+ -+ /* Receive data path. */ -+ struct napi_struct napi; -+ int dma_in_inst; -+ -+ /* RX-ring state. */ -+ crisv32_eth_descr *active_rx_desc; -+ crisv32_eth_descr *prev_rx_desc; -+ crisv32_eth_descr *last_rx_desc; -+ -+ unsigned long newbuf; -+ u8 new_rx_package; -+ u8 pending_overrun; -+ u8 overrun_set; -+ u8 link; -+ int napi_processing; -+ struct timer_list receive_timer; -+ struct work_struct receive_work; -+ reg_eth_rw_rec_ctrl saved_rec_ctrl; -+ int saved_ga_lo; -+ int saved_ga_hi; -+ int do_rx_recovery; -+ -+ /* Control paths. */ -+ spinlock_t lock; -+ struct net_device *dev; -+ int eth_inst; -+ -+ /* Toggle network LEDs usage at runtime */ -+ int use_leds; -+ struct crisv32_eth_leds *leds; -+ -+ /* PHY control. */ -+ int fixed_phy; -+ spinlock_t transceiver_lock; /* Protect transceiver state. */ -+ struct transceiver_ops *transceiver; -+ struct mii_if_info mii_if; -+ -+ /* Specifies if we should do autonegotiation or not. -+ * TODO: This ad-hoc hack should be removed. Ethtool already supports -+ * this kind of control. -+ */ -+ int autoneg_normal; -+ -+ struct timer_list duplex_timer; -+ int full_duplex; -+ enum duplex current_duplex; -+ -+ struct timer_list speed_timer; -+ int current_speed; /* Speed read from tranceiver */ -+ int current_speed_selection; /* Speed selected by user */ -+ -+ /* Statistics. */ -+ u64 tx_dma_restarts; -+ u64 tx_mac_resets; -+ u64 rx_dma_restarts; -+ u64 rx_dma_timeouts; -+ u64 rx_restarts_dropped; -+ -+ struct net_device_stats stats; -+}; -+ -+/* Function prototypes. */ -+static int crisv32_ethernet_init(void); -+static int crisv32_ethernet_device_init(struct net_device *dev); -+static int crisv32_eth_open(struct net_device *dev); -+static int crisv32_eth_close(struct net_device *dev); -+static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr); -+static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id); -+static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id); -+static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id); -+static int crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev); -+static void crisv32_eth_hw_send_packet(unsigned char *buf, int length, -+ void *priv); -+static void crisv32_eth_do_tx_recovery(struct net_device *dev); -+static void crisv32_eth_set_rx_mode(struct net_device *dev); -+static int crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, -+ int cmd); -+static int crisv32_eth_set_config(struct net_device *dev, struct ifmap *map); -+#ifdef CONFIG_CRIS_MACH_ARTPEC3 -+static void crisv32_eth_switch_intmem_usage(struct net_device *dev); -+#endif -+static void crisv32_eth_negotiate(struct net_device *dev); -+static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed); -+#ifndef CONFIG_ETRAX_NO_PHY -+static void crisv32_eth_check_duplex(unsigned long idev); -+static void crisv32_eth_check_speed(unsigned long idev); -+#endif -+ -+static void crisv32_eth_set_duplex(struct net_device *dev, enum duplex); -+static int crisv32_eth_probe_transceiver(struct net_device *dev); -+ -+static struct ethtool_ops crisv32_ethtool_ops; -+ -+#ifndef CONFIG_ETRAX_NO_PHY -+static void generic_check_speed(struct net_device *dev); -+static void generic_check_duplex(struct net_device *dev); -+static void broadcom_check_speed(struct net_device *dev); -+static void broadcom_check_duplex(struct net_device *dev); -+static void tdk_check_speed(struct net_device *dev); -+static void tdk_check_duplex(struct net_device *dev); -+static void intel_check_speed(struct net_device *dev); -+static void intel_check_duplex(struct net_device *dev); -+static void national_check_speed(struct net_device *dev); -+static void national_check_duplex(struct net_device *dev); -+static void vitesse_check_speed(struct net_device *dev); -+static void vitesse_check_duplex(struct net_device *dev); -+static void davicom_check_speed(struct net_device *dev); -+static void davicom_check_duplex(struct net_device *dev); -+#endif -+ -+#ifdef CONFIG_NET_POLL_CONTROLLER -+static void crisv32_netpoll(struct net_device *dev); -+#endif -+ -+static void crisv32_clear_network_leds(unsigned long dummy); -+static void crisv32_set_network_leds(int active, struct net_device *dev); -+ -+static int crisv32_eth_get_mdio_reg(struct net_device *dev, -+ int phyid, int reg_num); -+static void crisv32_eth_set_mdio_reg(struct net_device *dev, -+ int phyid, int reg_num, int val); -+static void crisv32_eth_send_mdio_cmd(struct net_device *dev, -+ unsigned short cmd, int write_cmd); -+static void crisv32_eth_send_mdio_bit(struct net_device *dev, -+ unsigned char bit); -+static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev); -+ -+static struct net_device_stats *crisv32_get_stats(struct net_device *dev); -+static void crisv32_start_dma_out(struct crisv32_ethernet_local *np); -+ -+#endif /* _ETRAX_ETHERNET_H_ */ -- cgit v1.2.3