From f9b8f27119a5fc811c2a0a25e686638c8b5680b8 Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Thu, 17 Dec 2009 20:17:21 +0100 Subject: add sangam-atm package - driver package for ag241 dsl modem, it loads, but we will see if it works.. --- package/sangam-atm/patches/patch-Makefile | 29 + package/sangam-atm/patches/patch-cp_sar_reg_h | 8 + package/sangam-atm/patches/patch-cppi_cpaal5_c | 11 + .../sangam-atm/patches/patch-dev_host_interface_h | 11 + package/sangam-atm/patches/patch-dsl_hal_advcfg_c | 15 + package/sangam-atm/patches/patch-dsl_hal_api_c | 107 ++++ package/sangam-atm/patches/patch-dsl_hal_support_c | 52 ++ package/sangam-atm/patches/patch-dsl_hal_support_h | 11 + package/sangam-atm/patches/patch-tn7api_h | 17 + package/sangam-atm/patches/patch-tn7atm_c | 633 +++++++++++++++++++++ package/sangam-atm/patches/patch-tn7atm_h | 50 ++ package/sangam-atm/patches/patch-tn7dsl_c | 602 ++++++++++++++++++++ package/sangam-atm/patches/patch-tn7sar_c | 79 +++ 13 files changed, 1625 insertions(+) create mode 100644 package/sangam-atm/patches/patch-Makefile create mode 100644 package/sangam-atm/patches/patch-cp_sar_reg_h create mode 100644 package/sangam-atm/patches/patch-cppi_cpaal5_c create mode 100644 package/sangam-atm/patches/patch-dev_host_interface_h create mode 100644 package/sangam-atm/patches/patch-dsl_hal_advcfg_c create mode 100644 package/sangam-atm/patches/patch-dsl_hal_api_c create mode 100644 package/sangam-atm/patches/patch-dsl_hal_support_c create mode 100644 package/sangam-atm/patches/patch-dsl_hal_support_h create mode 100644 package/sangam-atm/patches/patch-tn7api_h create mode 100644 package/sangam-atm/patches/patch-tn7atm_c create mode 100644 package/sangam-atm/patches/patch-tn7atm_h create mode 100644 package/sangam-atm/patches/patch-tn7dsl_c create mode 100644 package/sangam-atm/patches/patch-tn7sar_c (limited to 'package/sangam-atm/patches') diff --git a/package/sangam-atm/patches/patch-Makefile b/package/sangam-atm/patches/patch-Makefile new file mode 100644 index 000000000..4386b4a3f --- /dev/null +++ b/package/sangam-atm/patches/patch-Makefile @@ -0,0 +1,29 @@ +--- sangam-atm-1.0.orig/Makefile 2005-06-01 05:46:28.000000000 +0200 ++++ sangam-atm-1.0/Makefile 2009-12-17 19:10:13.456420379 +0100 +@@ -1,18 +1,11 @@ +-# File: drivers/atm/ti_evm3/Makefile +-# +-# Makefile for the Texas Instruments EVM3 ADSL/ATM driver. + # ++# Makefile for the TIATM device driver. + # +-# Copyright (c) 2000 Texas Instruments Incorporated. +-# Jeff Harrell (jharrell@telogy.com) +-# Viren Balar (vbalar@ti.com) +-# Victor Wells (vwells@telogy.com) +-# +-include $(TOPDIR)/Rules.make +- +- +- +- +- +- + ++CONFIG_SANGAM_ATM=m ++#EXTRA_CFLAGS += -DEL -I. -DPOST_SILICON -DCOMMON_NSP -DCONFIG_LED_MODULE -DDEREGISTER_LED -DNO_ACT ++#EXTRA_CFLAGS += -DEL -I$(PWD) -DPOST_SILICON -DCOMMON_NSP -DNO_ACT -D__NO__VOICE_PATCH__ -DEL ++#EXTRA_CFLAGS += -DEL -I$(PWD) -DPOST_SILICON -DCOMMON_NSP -D__NO__VOICE_PATCH__ -DEL ++EXTRA_CFLAGS += -DEL -I$(PWD) -DPOST_SILICON -DCOMMON_NSP -D__NO__VOICE_PATCH__ -DEL -DCPATM_TASKLET_MODE ++obj-$(CONFIG_SANGAM_ATM) := tiatm.o ++tiatm-objs += cpsar.o aal5sar.o tn7sar.o tn7atm.o tn7dsl.o dsl_hal_api.o dsl_hal_support.o dsl_hal_advcfg.o diff --git a/package/sangam-atm/patches/patch-cp_sar_reg_h b/package/sangam-atm/patches/patch-cp_sar_reg_h new file mode 100644 index 000000000..2452ff86d --- /dev/null +++ b/package/sangam-atm/patches/patch-cp_sar_reg_h @@ -0,0 +1,8 @@ +--- sangam-atm-1.0.orig/cp_sar_reg.h 2004-04-20 08:23:30.000000000 +0200 ++++ sangam-atm-1.0/cp_sar_reg.h 2009-12-17 19:25:17.702739456 +0100 +@@ -214,4 +214,4 @@ + + /* END OF FILE */ + +-#endif _INC_SAR_REG ++#endif diff --git a/package/sangam-atm/patches/patch-cppi_cpaal5_c b/package/sangam-atm/patches/patch-cppi_cpaal5_c new file mode 100644 index 000000000..a32408982 --- /dev/null +++ b/package/sangam-atm/patches/patch-cppi_cpaal5_c @@ -0,0 +1,11 @@ +--- sangam-atm-1.0.orig/cppi_cpaal5.c 2005-04-08 10:22:04.000000000 +0200 ++++ sangam-atm-1.0/cppi_cpaal5.c 2009-12-17 19:09:41.516423269 +0100 +@@ -352,7 +352,7 @@ static int halRxReturn(HAL_RECEIVEINFO * + { + /* malloc failed, add this RCB to Needs Buffer List */ + TempRcb->FragCount = 1; /*MJH+030417*/ +- (HAL_RCB *)TempRcb->Eop = TempRcb; /* GSG +030430 */ ++ TempRcb->Eop = TempRcb; /* GSG +030430 */ + + if(HalDev->NeedsCount < MAX_NEEDS) /* +MJH 030410 */ + { /* +MJH 030410 */ diff --git a/package/sangam-atm/patches/patch-dev_host_interface_h b/package/sangam-atm/patches/patch-dev_host_interface_h new file mode 100644 index 000000000..6927ab96b --- /dev/null +++ b/package/sangam-atm/patches/patch-dev_host_interface_h @@ -0,0 +1,11 @@ +--- sangam-atm-1.0.orig/dev_host_interface.h 2007-03-07 14:40:14.000000000 +0100 ++++ sangam-atm-1.0/dev_host_interface.h 2009-12-17 19:27:01.156438308 +0100 +@@ -1288,7 +1288,7 @@ typedef struct + + SINT16 devCodecRxdf4Coeff[12] ; // (BOTH) IIR Coefficients + SINT16 devCodecTxdf2aCoeff[64] ; // (BOTH) FIR filter coefficients +-#if OHIO_SUPPORT ++#if defined(OHIO_SUPPORT) + SINT16 devCodecTxdf2bCoeff[84] ; // (BOTH) FIR filter coefficients + #else + SINT16 devCodecTxdf2bCoeff[64] ; // (BOTH) FIR filter coefficients diff --git a/package/sangam-atm/patches/patch-dsl_hal_advcfg_c b/package/sangam-atm/patches/patch-dsl_hal_advcfg_c new file mode 100644 index 000000000..33149402d --- /dev/null +++ b/package/sangam-atm/patches/patch-dsl_hal_advcfg_c @@ -0,0 +1,15 @@ +--- sangam-atm-1.0.orig/dsl_hal_advcfg.c 2005-08-09 09:20:46.000000000 +0200 ++++ sangam-atm-1.0/dsl_hal_advcfg.c 2009-12-17 19:09:58.440420854 +0100 +@@ -36,9 +36,9 @@ + * 05Jul05 0.00.09 CPH CQ9775: Change dslhal_advcfg_configDsTones input parameters & support for ADSL2+ + * 24Jul05 0.00.10 CPH Fixed comments in dslhal_advcfg_configDsTones function header + *******************************************************************************/ +-#include +-#include +-#include ++#include "dev_host_interface.h" ++#include "dsl_hal_register.h" ++#include "dsl_hal_support.h" + + /*****************************************************************************/ + /* ACT API functions -- To be moved into their own independent module --RamP */ diff --git a/package/sangam-atm/patches/patch-dsl_hal_api_c b/package/sangam-atm/patches/patch-dsl_hal_api_c new file mode 100644 index 000000000..b88f4350f --- /dev/null +++ b/package/sangam-atm/patches/patch-dsl_hal_api_c @@ -0,0 +1,107 @@ +--- sangam-atm-1.0.orig/dsl_hal_api.c 2007-03-07 04:13:06.000000000 +0100 ++++ sangam-atm-1.0/dsl_hal_api.c 2009-12-17 19:39:11.092420102 +0100 +@@ -254,15 +254,15 @@ + * of phyEnableDisableWord & phyControlWord to avoid changing API struct + * which may cause change required to application data structure. + ******************************************************************************/ +-#include +-#include +-#include ++#include "dev_host_interface.h" ++#include "dsl_hal_register.h" ++#include "dsl_hal_support.h" + + #ifndef NO_ADV_STATS +-#include ++#include "dsl_hal_logtable.h" + #endif + +-#include ++#include "dsl_hal_version.h" + + // UR8_MERGE_START CQ11054 Jack Zhang + static unsigned int highprecision_selected = 0; //By default we use low precision for backward compt. +@@ -958,9 +958,6 @@ int dslhal_api_pollTrainingStatus(tidsl_ + + /*char *tmp;*/ + DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; +-#if SWTC +- DEV_HOST_tcHostCommDef_t TCHostCommDef; +-#endif + + dgprintf(5,"dslhal_api_pollTrainingStatus\n"); + pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr; +@@ -971,17 +968,6 @@ int dslhal_api_pollTrainingStatus(tidsl_ + dgprintf(1,"dslhal_support_blockRead failed\n"); + return DSLHAL_ERROR_BLOCK_READ; + } +-#if SWTC +- dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p); +- +- rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, +- &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t)); +- if (rc) +- { +- dgprintf(1,"dslhal_support_blockRead failed\n"); +- return DSLHAL_ERROR_BLOCK_READ; +- } +-#endif + + rc = dslhal_support_processTrainingState(ptidsl); + if(rc) +@@ -1025,9 +1011,6 @@ int dslhal_api_handleTrainingInterrupt(t + + /*char *tmp;*/ + DEV_HOST_dspOamSharedInterface_t *pdspOamSharedInterface, dspOamSharedInterface; +-#if SWTC +- DEV_HOST_tcHostCommDef_t TCHostCommDef; +-#endif + dgprintf(6,"dslhal_api_handleTrainingInterrupt\n"); + pdspOamSharedInterface = (DEV_HOST_dspOamSharedInterface_t *) ptidsl->pmainAddr; + rc = dslhal_support_blockRead(pdspOamSharedInterface, &dspOamSharedInterface, +@@ -1037,17 +1020,6 @@ int dslhal_api_handleTrainingInterrupt(t + dgprintf(1,"dslhal_support_blockRead failed\n"); + return DSLHAL_ERROR_BLOCK_READ; + } +-#if SWTC +- dspOamSharedInterface.tcHostComm_p =(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p); +- +- rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, +- &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t)); +- if (rc) +- { +- dgprintf(1,"dslhal_support_blockRead failed\n"); +- return DSLHAL_ERROR_BLOCK_READ; +- } +-#endif + + if(intrSource & MASK_BITFIELD_INTERRUPTS) + { +@@ -1705,27 +1677,15 @@ void dslhal_api_gatherStatistics(tidsl_t + /* Get ATM Stats for both US and DS for Channel 0*/ + ptidsl->AppData.usAtm_count[0] = dslhal_support_byteSwap32(usAtmStats0.goodCount); + ptidsl->AppData.usIdle_count[0] = dslhal_support_byteSwap32(usAtmStats0.idleCount); +-#if SWTC +- ptidsl->AppData.usPdu_count[0] = dslhal_support_byteSwap32(usAtmStats0.pduCount); +-#endif + ptidsl->AppData.dsGood_count[0] = dslhal_support_byteSwap32(dsAtmStats0.goodCount); + ptidsl->AppData.dsIdle_count[0] = dslhal_support_byteSwap32(dsAtmStats0.idleCount); +-#if SWTC +- ptidsl->AppData.dsPdu_count[0] = dslhal_support_byteSwap32(dsAtmStats0.pduCount); +-#endif + ptidsl->AppData.dsBadHec_count[0] = dslhal_support_byteSwap32((dsAtmStats0.badHecCount)); + ptidsl->AppData.dsOVFDrop_count[0] = dslhal_support_byteSwap32((dsAtmStats0.ovflwDropCount)); + /* Get ATM Stats for both US and DS for Channel 1*/ + ptidsl->AppData.usAtm_count[1] = dslhal_support_byteSwap32(usAtmStats1.goodCount); + ptidsl->AppData.usIdle_count[1] = dslhal_support_byteSwap32(usAtmStats1.idleCount); +-#if SWTC +- ptidsl->AppData.usPdu_count[1] = dslhal_support_byteSwap32(usAtmStats1.pduCount); +-#endif + ptidsl->AppData.dsGood_count[1] = dslhal_support_byteSwap32(dsAtmStats1.goodCount); + ptidsl->AppData.dsIdle_count[1] = dslhal_support_byteSwap32(dsAtmStats1.idleCount); +-#if SWTC +- ptidsl->AppData.dsPdu_count[1] = dslhal_support_byteSwap32(dsAtmStats1.pduCount); +-#endif + ptidsl->AppData.dsBadHec_count[1] = dslhal_support_byteSwap32((dsAtmStats1.badHecCount)); + ptidsl->AppData.dsOVFDrop_count[1] = dslhal_support_byteSwap32((dsAtmStats1.ovflwDropCount)); + diff --git a/package/sangam-atm/patches/patch-dsl_hal_support_c b/package/sangam-atm/patches/patch-dsl_hal_support_c new file mode 100644 index 000000000..f1cdcd64a --- /dev/null +++ b/package/sangam-atm/patches/patch-dsl_hal_support_c @@ -0,0 +1,52 @@ +--- sangam-atm-1.0.orig/dsl_hal_support.c 2007-05-18 09:47:33.000000000 +0200 ++++ sangam-atm-1.0/dsl_hal_support.c 2009-12-17 19:40:14.924421047 +0100 +@@ -140,9 +140,9 @@ + * oamFeature are overriden + // UR8_MERGE_END CQ10774 Ram + *******************************************************************************/ +-#include +-#include +-#include ++#include "dev_host_interface.h" ++#include "dsl_hal_register.h" ++#include "dsl_hal_support.h" + + #define NUM_READ_RETRIES 3 + static unsigned int dslhal_support_adsl2ByteSwap32(unsigned int in32Bits); +@@ -1665,9 +1665,6 @@ int dslhal_support_hostDspCodeDownload(t + unsigned char * image; + char *tmp = (char *)DEV_HOST_DSP_OAM_POINTER_LOCATION; + DEV_HOST_dspVersionDef_t dspVersion; +-#if SWTC +- DEV_HOST_tcHostCommDef_t TCHostCommDef; +-#endif + DEV_HOST_oamWrNegoParaDef_t OamWrNegoParaDef; + DEV_HOST_dspOamSharedInterface_t dspOamSharedInterface, *pdspOamSharedInterface; + DEV_HOST_olayDpDef_t olayDpParms; +@@ -2152,26 +2149,6 @@ int dslhal_support_hostDspCodeDownload(t + } + + /* table_dsp info */ +-#if SWTC +- dspOamSharedInterface.tcHostComm_p = (DEV_HOST_tcHostCommDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.tcHostComm_p); +- rc = dslhal_support_blockRead(&pdspOamSharedInterface->tcHostComm_p, +- &pTCHostCommDef, 4); +- if (rc) +- { +- dgprintf(1,"dslhal_support_blockRead failed\n"); +- return DSLHAL_ERROR_BLOCK_READ; +- } +- +- pTCHostCommDef=(DEV_HOST_tcHostCommDef_t *) dslhal_support_byteSwap32((unsigned int)pTCHostCommDef); +- +- rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.tcHostComm_p, +- &TCHostCommDef, sizeof(DEV_HOST_tcHostCommDef_t)); +- if (rc) +- { +- dgprintf(1,"dslhal_support_blockRead failed\n"); +- return DSLHAL_ERROR_BLOCK_READ; +- } +-#endif + /* Select the Multimode Training */ + dspOamSharedInterface.oamWriteNegoParams_p = (DEV_HOST_oamWrNegoParaDef_t *)dslhal_support_byteSwap32((unsigned int)dspOamSharedInterface.oamWriteNegoParams_p); + rc = dslhal_support_blockRead((PVOID)dspOamSharedInterface.oamWriteNegoParams_p, &OamWrNegoParaDef, sizeof(DEV_HOST_oamWrNegoParaDef_t)); diff --git a/package/sangam-atm/patches/patch-dsl_hal_support_h b/package/sangam-atm/patches/patch-dsl_hal_support_h new file mode 100644 index 000000000..074953501 --- /dev/null +++ b/package/sangam-atm/patches/patch-dsl_hal_support_h @@ -0,0 +1,11 @@ +--- sangam-atm-1.0.orig/dsl_hal_support.h 2005-11-11 09:07:04.000000000 +0100 ++++ sangam-atm-1.0/dsl_hal_support.h 2009-12-17 19:09:41.532422794 +0100 +@@ -49,7 +49,7 @@ + * 04Nov05 0.11.00 CPH Fixed T1413 mode got Zero DS/US rate when DSL_BIT_TMODE is set. + *******************************************************************************/ + +-#include ++#include "dsl_hal_api.h" + + #define virtual2Physical(a) (((int)a)&~0xe0000000) + /* External Function Prototype Declarations */ diff --git a/package/sangam-atm/patches/patch-tn7api_h b/package/sangam-atm/patches/patch-tn7api_h new file mode 100644 index 000000000..7688e20e0 --- /dev/null +++ b/package/sangam-atm/patches/patch-tn7api_h @@ -0,0 +1,17 @@ +--- sangam-atm-1.0.orig/tn7api.h 2006-12-11 15:36:54.000000000 +0100 ++++ sangam-atm-1.0/tn7api.h 2009-12-17 19:24:45.926721344 +0100 +@@ -107,7 +107,7 @@ int tn7dsl_proc_dbg_rmsgs4(char* buf, ch + + int tn7dsl_proc_write_stats(struct file *fp, const char * buf, unsigned long count, void * data); + int tn7dsl_proc_modem(char* buf, char **start, off_t offset, int count,int *eof, void *data); +-inline int tn7dsl_handle_interrupt(void); ++int tn7dsl_handle_interrupt(void); + + void tn7dsl_dslmod_sysctl_register(void); + void tn7dsl_dslmod_sysctl_unregister(void); +@@ -173,4 +173,4 @@ void tn7sar_get_sar_firmware_version(uns + int tn7sar_proc_oam_ping(char* buf, char **start, off_t offset, int count,int *eof, void *data); + int tn7sar_proc_pvc_table(char* buf, char **start, off_t offset, int count,int *eof, void *data); + int tn7sar_tx_flush(void *privContext, int chan, int queue, int skip); +-#endif __SGAPI_H ++#endif diff --git a/package/sangam-atm/patches/patch-tn7atm_c b/package/sangam-atm/patches/patch-tn7atm_c new file mode 100644 index 000000000..744dec517 --- /dev/null +++ b/package/sangam-atm/patches/patch-tn7atm_c @@ -0,0 +1,633 @@ +--- sangam-atm-1.0.orig/tn7atm.c 2007-05-18 09:45:50.000000000 +0200 ++++ sangam-atm-1.0/tn7atm.c 2009-12-17 19:10:27.616421480 +0100 +@@ -61,7 +61,6 @@ + * UR8_MERGE_END CQ11057* + *********************************************************************************************/ + +-#include + #include + #include + #include +@@ -69,11 +68,20 @@ + #include + #include + #include +-#include +-#include + #include + #include + #include ++#include ++ ++#include ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) ++#include ++#include ++#else ++#include ++#include ++#endif ++ + #include "dsl_hal_api.h" + #include "tn7atm.h" + #include "tn7api.h" +@@ -82,8 +90,149 @@ + #include "dsl_hal_register.h" + + #ifdef MODULE ++MODULE_LICENSE("GPL"); + MODULE_DESCRIPTION ("Tnetd73xx ATM Device Driver"); + MODULE_AUTHOR ("Zhicheng Tang"); ++ ++int mp_sar_ipacemax = -1; ++module_param_named(ipacemax, mp_sar_ipacemax, int, 0); ++MODULE_PARM_DESC(ipacemax, "Interrupt pacing"); ++ ++char *mp_macc = NULL; ++module_param_named(macc, mp_macc, charp, 0); ++MODULE_PARM_DESC(macc, "MAC address"); ++ ++int mp_dsp_noboost = -1; ++module_param_named(dsp_noboost, mp_dsp_noboost, int, 0); ++MODULE_PARM_DESC(dsp_noboost, "Suppress DSP frequency boost"); ++ ++int mp_dsp_freq = -1; ++module_param_named(dsp_freq, mp_dsp_freq, int, 0); ++MODULE_PARM_DESC(dsp_freq, "Frequency to boost the DSP to"); ++ ++char *mp_featctl0 = NULL; ++module_param_named(featctl0, mp_featctl0, charp, 0); ++MODULE_PARM_DESC(featctl0, "DSL feature control 0"); ++ ++char *mp_featctl1 = NULL; ++module_param_named(featctl1, mp_featctl1, charp, 0); ++MODULE_PARM_DESC(featctl1, "DSL feature control 1"); ++ ++char *mp_phyctl0 = NULL; ++module_param_named(phyctl0, mp_phyctl0, charp, 0); ++MODULE_PARM_DESC(phyctl0, "DSL PHY control 0"); ++ ++char *mp_phyctl1 = NULL; ++module_param_named(phyctl1, mp_phyctl1, charp, 0); ++MODULE_PARM_DESC(phyctl1, "DSL PHY control 1"); ++ ++int mp_turbodsl = -1; ++module_param_named(turbodsl, mp_turbodsl, int, 0); ++MODULE_PARM_DESC(turbodsl, "Enable TurboDSL"); ++ ++int mp_sar_rxbuf = -1; ++module_param_named(sar_rxbuf, mp_sar_rxbuf, int, 0); ++MODULE_PARM_DESC(sar_rxbuf, "SAR RxBuf size"); ++ ++int mp_sar_rxmax = -1; ++module_param_named(sar_rxmax, mp_sar_rxmax, int, 0); ++MODULE_PARM_DESC(sar_rxmax, "SAR RxMax size"); ++ ++int mp_sar_txbuf = -1; ++module_param_named(sar_txbuf, mp_sar_txbuf, int, 0); ++MODULE_PARM_DESC(sar_txbuf, "SAR TxBuf size"); ++ ++int mp_sar_txmax = -1; ++module_param_named(sar_txmax, mp_sar_txmax, int, 0); ++MODULE_PARM_DESC(sar_txmax, "SAR TxMax size"); ++ ++char *mp_modulation = NULL; ++module_param_named(modulation, mp_modulation, charp, 0); ++MODULE_PARM_DESC(modulation, "Modulation"); ++ ++int mp_fine_gain_control = -1; ++module_param_named(fine_gain_control, mp_fine_gain_control, int, 0); ++MODULE_PARM_DESC(fine_gain_control, "Fine gain control"); ++ ++int mp_fine_gain_value = -1; ++module_param_named(fine_gain_value, mp_fine_gain_value, int, 0); ++MODULE_PARM_DESC(fine_gain_value, "Fine gain value"); ++ ++int mp_enable_margin_retrain = -1; ++module_param_named(enable_margin_retrain, mp_enable_margin_retrain, int, 0); ++MODULE_PARM_DESC(enable_margin_retrain, "Enable margin retrain"); ++ ++int mp_margin_threshold = -1; ++module_param_named(margin_threshold, mp_margin_threshold, int, 0); ++MODULE_PARM_DESC(margin_threshold, "Margin retrain treshold"); ++ ++int mp_enable_rate_adapt = -1; ++module_param_named(enable_rate_adapt, mp_enable_rate_adapt, int, 0); ++MODULE_PARM_DESC(enable_rate_adapt, "Enable rate adaption"); ++ ++int mp_powercutback = -1; ++module_param_named(powercutback, mp_powercutback, int, 0); ++MODULE_PARM_DESC(powercutback, "Enable / disable powercutback"); ++ ++int mp_trellis = -1; ++module_param_named(trellis, mp_trellis, int, 0); ++MODULE_PARM_DESC(trellis, "Enable / disable trellis coding"); ++ ++int mp_bitswap = -1; ++module_param_named(bitswap, mp_bitswap, int, 0); ++MODULE_PARM_DESC(bitswap, "Enable / disable bitswap"); ++ ++int mp_maximum_bits_per_carrier = -1; ++module_param_named(maximum_bits_per_carrier, mp_maximum_bits_per_carrier, int, 0); ++MODULE_PARM_DESC(maximum_bits_per_carrier, "Maximum bits per carrier"); ++ ++int mp_maximum_interleave_depth = -1; ++module_param_named(maximum_interleave_depth, mp_maximum_interleave_depth, int, 0); ++MODULE_PARM_DESC(maximum_interleave_depth, "Maximum interleave depth"); ++ ++int mp_pair_selection = -1; ++module_param_named(pair_selection, mp_pair_selection, int, 0); ++MODULE_PARM_DESC(pair_selection, "Pair selection"); ++ ++int mp_dgas_polarity = -1; ++module_param_named(dgas_polarity, mp_dgas_polarity, int, 0); ++MODULE_PARM_DESC(dgas_polarity, "DGAS polarity"); ++ ++int mp_los_alarm = -1; ++module_param_named(los_alarm, mp_los_alarm, int, 0); ++MODULE_PARM_DESC(los_alarm, "LOS alarm"); ++ ++char *mp_eoc_vendor_id = NULL; ++module_param_named(eoc_vendor_id, mp_eoc_vendor_id, charp, 0); ++MODULE_PARM_DESC(eoc_vendor_id, "EOC vendor id"); ++ ++int mp_eoc_vendor_revision = -1; ++module_param_named(eoc_vendor_revision, mp_eoc_vendor_revision, int, 0); ++MODULE_PARM_DESC(eoc_vendor_revision, "EOC vendor revision"); ++ ++char *mp_eoc_vendor_serialnum = NULL; ++module_param_named(eoc_vendor_serialnum, mp_eoc_vendor_serialnum, charp, 0); ++MODULE_PARM_DESC(eoc_vendor_serialnum, "EOC vendor serial number"); ++ ++char *mp_invntry_vernum = NULL; ++module_param_named(invntry_vernum, mp_invntry_vernum, charp, 0); ++MODULE_PARM_DESC(invntry_vernum, "Inventory revision number"); ++ ++int mp_dsl_bit_tmode = -1; ++module_param_named(dsl_bit_tmode, mp_dsl_bit_tmode, int, 0); ++MODULE_PARM_DESC(dsl_bit_tmode, "DSL bit training mode"); ++ ++int mp_high_precision = -1; ++module_param_named(high_precision, mp_high_precision, int, 0); ++MODULE_PARM_DESC(high_precision, "High precision"); ++ ++int mp_autopvc_enable = -1; ++module_param_named(autopvc_enable, mp_autopvc_enable, int, 0); ++MODULE_PARM_DESC(autopvc_enable, "Enable / disable automatic PVC"); ++ ++int mp_oam_lb_timeout = -1; ++module_param_named(oam_lb_timeout, mp_oam_lb_timeout, int, 0); ++MODULE_PARM_DESC(oam_lb_timeout, "OAM LB timeout"); + #endif + + #ifndef TRUE +@@ -100,9 +249,9 @@ MODULE_AUTHOR ("Zhicheng Tang"); + + /*end of externs */ + +-#ifndef TI_STATIC_ALLOCATIONS +-#define TI_STATIC_ALLOCATIONS +-#endif ++//#ifndef TI_STATIC_ALLOCATIONS ++//#define TI_STATIC_ALLOCATIONS ++//#endif + + #define tn7atm_kfree_skb(x) dev_kfree_skb(x) + +@@ -114,7 +263,7 @@ static int EnableQoS = FALSE; + /* prototypes */ + static int tn7atm_set_can_support_adsl2 (int can); + +-static int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci); ++static int tn7atm_open (struct atm_vcc *vcc); + + static void tn7atm_close (struct atm_vcc *vcc); + +@@ -257,13 +406,12 @@ static const struct atmdev_ops tn7atm_op + getsockopt: NULL, + setsockopt: NULL, + send: tn7atm_send, +- sg_send: NULL, + phy_put: NULL, + phy_get: NULL, + change_qos: tn7atm_change_qos, + }; + +-const char drv_proc_root_folder[] = "avalanche/"; ++const char drv_proc_root_folder[] = "avalanche"; + static struct proc_dir_entry *root_proc_dir_entry = NULL; + #define DRV_PROC_MODE 0644 + static int proc_root_already_exists = TRUE; +@@ -559,62 +707,12 @@ static int turbodsl_check_priority_type( + + /*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * +- * Function: int tn7atm_walk_vccs(struct atm_dev *dev, short *vcc, int *vci) +- * +- * Description: retrieve VPI/VCI for connection +- * +- *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ +-static int tn7atm_walk_vccs (struct atm_vcc *vcc, short *vpi, int *vci) +-{ +- struct atm_vcc *walk; +- +- /* +- * find a free VPI +- */ +- if (*vpi == ATM_VPI_ANY) +- { +- +- for (*vpi = 0, walk = vcc->dev->vccs; walk; walk = walk->next) +- { +- +- if ((walk->vci == *vci) && (walk->vpi == *vpi)) +- { +- (*vpi)++; +- walk = vcc->dev->vccs; +- } +- } +- } +- +- /* +- * find a free VCI +- */ +- if (*vci == ATM_VCI_ANY) +- { +- +- for (*vci = ATM_NOT_RSV_VCI, walk = vcc->dev->vccs; walk; +- walk = walk->next) +- { +- +- if ((walk->vpi = *vpi) && (walk->vci == *vci)) +- { +- *vci = walk->vci + 1; +- walk = vcc->dev->vccs; +- } +- } +- } +- +- return 0; +-} +- +- +-/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +- * + * Function: int tn7atm_sar_irq(void) + * + * Description: tnetd73xx SAR interrupt. + * + *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ +-static void tn7atm_sar_irq (int irq, void *voiddev, struct pt_regs *regs) ++static irqreturn_t tn7atm_sar_irq (int irq, void *voiddev) + { + struct atm_dev *atmdev; + Tn7AtmPrivate *priv; +@@ -641,6 +739,7 @@ static void tn7atm_sar_irq (int irq, voi + #ifdef TIATM_INST_SUPP + psp_trace_par (ATM_DRV_SAR_ISR_EXIT, retval); + #endif ++ return IRQ_HANDLED; + } + + /*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +@@ -650,7 +749,7 @@ static void tn7atm_sar_irq (int irq, voi + * Description: tnetd73xx DSL interrupt. + * + *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ +-static void tn7atm_dsl_irq (int irq, void *voiddev, struct pt_regs *regs) ++static irqreturn_t tn7atm_dsl_irq (int irq, void *voiddev) + { + struct atm_dev *atmdev; + Tn7AtmPrivate *priv; +@@ -672,6 +771,8 @@ static void tn7atm_dsl_irq (int irq, voi + #ifdef TIATM_INST_SUPP + psp_trace_par (ATM_DRV_DSL_ISR_EXIT, retval); + #endif ++ ++ return IRQ_HANDLED; + } + + /*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +@@ -693,25 +794,25 @@ static int __init tn7atm_irq_request (st + * Register SAR interrupt + */ + priv->sar_irq = LNXINTNUM (ATM_SAR_INT); /* Interrupt line # */ +- if (request_irq (priv->sar_irq, tn7atm_sar_irq, SA_INTERRUPT, "SAR ", dev)) ++ if (request_irq (priv->sar_irq, tn7atm_sar_irq, IRQF_DISABLED, "SAR ", dev)) + printk ("Could not register tn7atm_sar_irq\n"); + + /* + * interrupt pacing + */ + ptr = prom_getenv ("sar_ipacemax"); +- if (ptr) ++ if (ptr || mp_sar_ipacemax != -1) + { +- def_sar_inter_pace = os_atoi (ptr); ++ def_sar_inter_pace = mp_sar_ipacemax == -1 ? os_atoi (ptr) : mp_sar_ipacemax; + } +- avalanche_request_pacing (priv->sar_irq, ATM_SAR_INT_PACING_BLOCK_NUM, +- def_sar_inter_pace); ++/* avalanche_request_pacing (priv->sar_irq, ATM_SAR_INT_PACING_BLOCK_NUM, ++ def_sar_inter_pace);*/ + + /* + * Reigster Receive interrupt A + */ + priv->dsl_irq = LNXINTNUM (ATM_DSL_INT); /* Interrupt line # */ +- if (request_irq (priv->dsl_irq, tn7atm_dsl_irq, SA_INTERRUPT, "DSL ", dev)) ++ if (request_irq (priv->dsl_irq, tn7atm_dsl_irq, IRQF_DISABLED, "DSL ", dev)) + printk ("Could not register tn7atm_dsl_irq\n"); + + /***** VRB Tasklet Mode ****/ +@@ -842,7 +943,7 @@ static int __init tn7atm_get_ESI (struct + char esi_addr[ESI_LEN] = { 0x00, 0x00, 0x11, 0x22, 0x33, 0x44 }; + char *esiaddr_str = NULL; + +- esiaddr_str = prom_getenv ("maca"); ++ esiaddr_str = mp_macc ? mp_macc : prom_getenv ("maca"); + + if (!esiaddr_str) + { +@@ -875,11 +976,15 @@ static int __init tn7atm_get_ESI (struct + #define ATM_VBR_RT 5 + #endif + +-int tn7atm_open (struct atm_vcc *vcc, short vpi, int vci) ++int tn7atm_open (struct atm_vcc *vcc) + { + tn7atm_activate_vc_parm_t tn7atm_activate_vc_parm; + int rc; + //int flags; ++ tn7atm_activate_vc_parm.pcr = 0x20000; ++ tn7atm_activate_vc_parm.scr = 0x20000; ++ tn7atm_activate_vc_parm.mbs = 0x20000; ++ tn7atm_activate_vc_parm.cdvt = 10000; + + dgprintf(1, "tn7atm_open()\n"); + +@@ -891,24 +996,18 @@ int tn7atm_open (struct atm_vcc *vcc, sh + return -1; + } + +- MOD_INC_USE_COUNT; +- +- /* find a free VPI/VCI */ +- tn7atm_walk_vccs(vcc, &vpi, &vci); +- +- vcc->vpi = vpi; +- vcc->vci = vci; ++// MOD_INC_USE_COUNT; + +- if ((vci == ATM_VCI_UNSPEC) || (vpi == ATM_VCI_UNSPEC)) ++ if ((vcc->vci == ATM_VCI_UNSPEC) || (vcc->vpi == ATM_VCI_UNSPEC)) + { +- MOD_DEC_USE_COUNT; ++// MOD_DEC_USE_COUNT; + return -EBUSY; + } + +- tn7atm_activate_vc_parm.vpi = vpi; +- tn7atm_activate_vc_parm.vci = vci; ++ tn7atm_activate_vc_parm.vpi = vcc->vpi; ++ tn7atm_activate_vc_parm.vci = vcc->vci; + +- if ((vpi == CLEAR_EOC_VPI) && (vci == CLEAR_EOC_VCI)) ++ if ((vcc->vpi == CLEAR_EOC_VPI) && (vcc->vci == CLEAR_EOC_VCI)) + { + /* always use (max_dma_chan+1) for clear eoc */ + tn7atm_activate_vc_parm.chan = EOC_DMA_CHAN; +@@ -916,7 +1015,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh + /* check to see whether clear eoc is opened or not */ + if (tn7atm_activate_vc_parm.priv->lut[tn7atm_activate_vc_parm.chan].inuse) + { +- MOD_DEC_USE_COUNT; ++// MOD_DEC_USE_COUNT; + printk("tn7atm_open: Clear EOC channel (dmachan=%d) already in use.\n", tn7atm_activate_vc_parm.chan); + return -EBUSY; + } +@@ -925,7 +1024,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh + if (rc) + { + printk("tn7atm_open: failed to setup clear_eoc\n"); +- MOD_DEC_USE_COUNT; ++// MOD_DEC_USE_COUNT; + return -EBUSY; + } + tn7atm_set_lut(tn7atm_activate_vc_parm.priv,vcc, tn7atm_activate_vc_parm.chan); +@@ -934,17 +1033,17 @@ int tn7atm_open (struct atm_vcc *vcc, sh + } + else /* PVC channel setup */ + { +- if ((vpi==REMOTE_MGMT_VPI) && (vci==REMOTE_MGMT_VCI)) ++ if ((vcc->vpi==REMOTE_MGMT_VPI) && (vcc->vci==REMOTE_MGMT_VCI)) + { + tn7atm_activate_vc_parm.chan = 14; /* always use chan 14 for MII PVC-base romote mgmt */ + } + else + { +- rc = tn7atm_lut_find(vpi, vci); ++ rc = tn7atm_lut_find(vcc->vpi, vcc->vci); + /* check to see whether PVC is opened or not */ + if(ATM_NO_DMA_CHAN != rc) + { +- MOD_DEC_USE_COUNT; ++// MOD_DEC_USE_COUNT; + printk("PVC already opened. dmachan = %d\n", rc); + return -EBUSY; + } +@@ -976,6 +1075,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh + tn7atm_activate_vc_parm.priority = 2; + break; + ++#if 0 + case ATM_VBR: /* Variable Bit Rate-Non RealTime*/ + tn7atm_activate_vc_parm.qos = 1; + tn7atm_activate_vc_parm.priority = 1; +@@ -997,6 +1097,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh + tn7atm_activate_vc_parm.mbs = vcc->qos.txtp.max_pcr; + tn7atm_activate_vc_parm.cdvt = vcc->qos.txtp.max_cdv; + break; ++#endif + + default: + tn7atm_activate_vc_parm.qos = 2; +@@ -1024,7 +1125,7 @@ int tn7atm_open (struct atm_vcc *vcc, sh + if (rc < 0) + { + printk("failed to activate hw channel\n"); +- MOD_DEC_USE_COUNT; ++// MOD_DEC_USE_COUNT; + tn7atm_lut_clear(vcc, tn7atm_activate_vc_parm.chan); + //spin_unlock_irqrestore(&chan_init_lock, flags); + return -EBUSY; +@@ -1114,7 +1215,7 @@ void tn7atm_close (struct atm_vcc *vcc) + tn7atm_lut_clear (vcc, dmachan); + //spin_unlock_irqrestore (&closeLock, closeFlag); + +- MOD_DEC_USE_COUNT; ++// MOD_DEC_USE_COUNT; + + dgprintf (1, "Leave tn7atm_close\n"); + } +@@ -1528,8 +1629,7 @@ int tn7atm_receive (void *os_dev, int ch + * firewall is on */ + + dgprintf (3, "pushing the skb...\n"); +- +- skb->stamp = vcc->timestamp = xtime; ++ __net_timestamp(skb); + + xdump ((unsigned char *) skb->data, skb->len, 5); + +@@ -1725,8 +1825,7 @@ static void tn7atm_exit (void) + + kfree (dev->dev_data); + +- // atm_dev_deregister (dev); +- shutdown_atm_dev (dev); ++ atm_dev_deregister (dev); + + /* + * remove proc entries +@@ -1885,9 +1984,6 @@ static int __init tn7atm_detect (void) + /* + * Set up proc entry for atm stats + */ +- if (tn7atm_xlate_proc_name +- (drv_proc_root_folder, &root_proc_dir_entry, &residual)) +- { + printk ("Creating new root folder %s in the proc for the driver stats \n", + drv_proc_root_folder); + root_proc_dir_entry = proc_mkdir (drv_proc_root_folder, NULL); +@@ -1897,7 +1993,6 @@ static int __init tn7atm_detect (void) + return -ENOMEM; + } + proc_root_already_exists = FALSE; +- } + + /* + * AV: Clean-up. Moved all the definitions to the data structure. +@@ -1981,15 +2076,15 @@ static int tn7atm_autoDetectDspBoost (vo + //UR8_MERGE_END CQ10450* + + cp = prom_getenv ("dsp_noboost"); +- if (cp) ++ if (cp || mp_dsp_noboost != -1) + { +- dsp_noboost = os_atoi (cp); ++ dsp_noboost = mp_dsp_noboost == -1 ? os_atoi (cp) : mp_dsp_noboost; + } + + cp = (char *) prom_getenv ("dsp_freq"); +- if (cp) ++ if (cp || mp_dsp_freq != -1) + { +- dspfreq = os_atoi (cp); ++ dspfreq = mp_dsp_freq == -1 ? os_atoi (cp) : mp_dsp_freq; + if (dspfreq == 250) + { + boostDsp = 1; +@@ -2238,8 +2333,9 @@ static int __init tn7atm_init (struct at + // Inter-Op DSL phy Control + // Note the setting of _dsl_Feature_0 and _dsl_Feature_1 must before + // dslhal_api_dslStartup (in tn7dsl_init()). +- if ((ptr = prom_getenv ("DSL_FEATURE_CNTL_0")) != NULL) ++ if ((ptr = prom_getenv ("DSL_FEATURE_CNTL_0")) != NULL || mp_featctl0 != NULL) + { ++ if (mp_featctl0 != NULL) ptr = mp_featctl0; + if ((ptr[0] == '0') && (ptr[1] == 'x')) // skip 0x before pass to + // os_atoh + ptr += 2; +@@ -2247,8 +2343,9 @@ static int __init tn7atm_init (struct at + _dsl_Feature_0_defined = 1; + } + +- if ((ptr = prom_getenv ("DSL_FEATURE_CNTL_1")) != NULL) ++ if ((ptr = prom_getenv ("DSL_FEATURE_CNTL_1")) != NULL || mp_featctl1 != NULL) + { ++ if (mp_featctl1 != NULL) ptr = mp_featctl1; + if ((ptr[0] == '0') && (ptr[1] == 'x')) // skip 0x before pass to + // os_atoh + ptr += 2; +@@ -2260,8 +2357,9 @@ static int __init tn7atm_init (struct at + // DSL phy Feature Control + // Note the setting of _dsl_PhyControl_0 and _dsl_PhyControl_1 must before + // dslhal_api_dslStartup (in tn7dsl_init()). +- if ((ptr = prom_getenv ("DSL_PHY_CNTL_0")) != NULL) ++ if ((ptr = prom_getenv ("DSL_PHY_CNTL_0")) != NULL || mp_phyctl0 != NULL) + { ++ if (mp_phyctl0 != NULL) ptr = mp_phyctl0; + if ((ptr[0] == '0') && (ptr[1] == 'x')) // skip 0x before pass to + // os_atoh + ptr += 2; +@@ -2269,8 +2367,9 @@ static int __init tn7atm_init (struct at + _dsl_PhyControl_0_defined = 1; + } + +- if ((ptr = prom_getenv ("DSL_PHY_CNTL_1")) != NULL) ++ if ((ptr = prom_getenv ("DSL_PHY_CNTL_1")) != NULL || mp_phyctl1 != NULL) + { ++ if (mp_phyctl1 != NULL) ptr = mp_phyctl1; + if ((ptr[0] == '0') && (ptr[1] == 'x')) // skip 0x before pass to + // os_atoh + ptr += 2; +@@ -2298,9 +2397,9 @@ static int __init tn7atm_init (struct at + priv->bTurboDsl = 1; + // read config for turbo dsl + ptr = prom_getenv ("TurboDSL"); +- if (ptr) ++ if (ptr || mp_turbodsl != -1) + { +- priv->bTurboDsl = os_atoi (ptr); ++ priv->bTurboDsl = mp_turbodsl == -1 ? os_atoi (ptr) : mp_turbodsl; + } + + // @Added to make Rx buffer number & Service max configurable through +@@ -2308,30 +2407,30 @@ static int __init tn7atm_init (struct at + priv->sarRxBuf = RX_BUFFER_NUM; + ptr = NULL; + ptr = prom_getenv ("SarRxBuf"); +- if (ptr) ++ if (ptr || mp_sar_rxbuf != -1) + { +- priv->sarRxBuf = os_atoi (ptr); ++ priv->sarRxBuf = mp_sar_rxbuf == -1 ? os_atoi (ptr) : mp_sar_rxbuf; + } + priv->sarRxMax = RX_SERVICE_MAX; + ptr = NULL; + ptr = prom_getenv ("SarRxMax"); +- if (ptr) ++ if (ptr || mp_sar_rxmax != -1) + { +- priv->sarRxMax = os_atoi (ptr); ++ priv->sarRxMax = mp_sar_rxmax == -1 ? os_atoi (ptr) : mp_sar_rxmax; + } + priv->sarTxBuf = TX_BUFFER_NUM; + ptr = NULL; + ptr = prom_getenv ("SarTxBuf"); +- if (ptr) ++ if (ptr || mp_sar_txbuf != -1) + { +- priv->sarTxBuf = os_atoi (ptr); ++ priv->sarTxBuf = mp_sar_txbuf == -1 ? os_atoi (ptr) : mp_sar_txbuf; + } + priv->sarTxMax = TX_SERVICE_MAX; + ptr = NULL; + ptr = prom_getenv ("SarTxMax"); +- if (ptr) ++ if (ptr || mp_sar_txmax != -1) + { +- priv->sarTxMax = os_atoi (ptr); ++ priv->sarTxMax = mp_sar_txmax == -1 ? os_atoi (ptr) : mp_sar_txmax; + } + + return 0; +@@ -2479,7 +2578,5 @@ static int tn7atm_proc_qos_write(struct + return count; + } + +-#ifdef MODULE + module_init (tn7atm_detect); + module_exit (tn7atm_exit); +-#endif /* MODULE */ diff --git a/package/sangam-atm/patches/patch-tn7atm_h b/package/sangam-atm/patches/patch-tn7atm_h new file mode 100644 index 000000000..e26e0441a --- /dev/null +++ b/package/sangam-atm/patches/patch-tn7atm_h @@ -0,0 +1,50 @@ +--- sangam-atm-1.0.orig/tn7atm.h 2006-04-05 07:33:06.000000000 +0200 ++++ sangam-atm-1.0/tn7atm.h 2009-12-17 19:15:08.310494800 +0100 +@@ -19,7 +19,8 @@ + //#include "mips_support.h" + #include + +-#include ++#define MIPS_EXCEPTION_OFFSET 8 ++#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET) + + #ifdef CONFIG_MODVERSIONS + #include +@@ -61,37 +62,6 @@ extern int avalanche_request_pacing(int + #include + #endif /* CONFIG_HAS_RELEASE_H_FILE */ + +-/* Base PSP 7.4 support */ +-#if ((PSP_VERSION_MAJOR == 7) && (PSP_VERSION_MINOR == 4)) +-#define TIATM_INST_SUPP /* Enable Instrumentation code. */ +-#define __NO__VOICE_PATCH__ /* Not required anymore. */ +- +-#if defined (CONFIG_MIPS_AVALANCHE_COLORED_LED) +-#include +- +-/* LED handles */ +-extern void *hnd_LED_0; +- +-#define MOD_ADSL 1 +-#define DEF_ADSL_IDLE 1 +-#define DEF_ADSL_TRAINING 2 +-#define DEF_ADSL_SYNC 3 +-#define DEF_ADSL_ACTIVITY 4 +- +-#define LED_NUM_1 0 +-#define LED_NUM_2 1 +- +-#endif /*defined (CONFIG_MIPS_AVALANCHE_COLORED_LED)*/ +- +-/* So as to not cause any confusion. */ +-#ifdef BASE_PSP_7X +-#undef BASE_PSP_7X +-#endif /*BASE_PSP_7X*/ +- +-#define TN7DSL_LED_ACTION(module_handle, module_name, state_id) led_manager_led_action(module_handle, state_id) +- +-#endif /*((PSP_VERSION_MAJOR == 7) && (PSP_VERSION_MINOR == 4)) */ +- + #ifdef CONFIG_LED_MODULE + #ifndef BASE_PSP_7X + #include diff --git a/package/sangam-atm/patches/patch-tn7dsl_c b/package/sangam-atm/patches/patch-tn7dsl_c new file mode 100644 index 000000000..8a06dcfe1 --- /dev/null +++ b/package/sangam-atm/patches/patch-tn7dsl_c @@ -0,0 +1,602 @@ +--- sangam-atm-1.0.orig/tn7dsl.c 2007-01-04 09:04:14.000000000 +0100 ++++ sangam-atm-1.0/tn7dsl.c 2009-12-17 19:22:19.372420289 +0100 +@@ -94,7 +94,6 @@ + * 1/02/07 JZ CQ11054: Data Precision and Range Changes for TR-069 Conformance + * UR8_MERGE_END CQ11054* + *********************************************************************************************/ +-#include + #include + #include + #include +@@ -102,8 +101,6 @@ + #include + #include + #include +-#include +-#include + #include + #include + #include +@@ -111,6 +108,18 @@ + #include + #include + #include ++#include ++#include ++ ++#include ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) ++#include ++#include ++#else ++#include ++#include ++#endif ++ + /* Modules specific header files */ + #include "tn7atm.h" + #include "tn7api.h" +@@ -133,6 +142,27 @@ + #define NEW_TRAINING_VAL_T1413 128 + #define NEW_TRAINING_VAL_MMODE 255 + ++extern char *mp_modulation; ++extern int mp_fine_gain_control; ++extern int mp_fine_gain_value; ++extern int mp_enable_margin_retrain; ++extern int mp_margin_threshold; ++extern int mp_enable_rate_adapt; ++extern int mp_powercutback; ++extern int mp_trellis; ++extern int mp_bitswap; ++extern int mp_maximum_bits_per_carrier; ++extern int mp_maximum_interleave_depth; ++extern int mp_pair_selection; ++extern int mp_dgas_polarity; ++extern int mp_los_alarm; ++extern char *mp_eoc_vendor_id; ++extern int mp_eoc_vendor_revision; ++extern char *mp_eoc_vendor_serialnum; ++extern char *mp_invntry_vernum; ++extern int mp_dsl_bit_tmode; ++extern int mp_high_precision; ++ + int testflag1 = 0; + extern int __guDbgLevel; + extern sar_stat_t sarStat; +@@ -173,7 +203,7 @@ led_reg_t ledreg[2]; + static struct led_funcs ledreg[2]; + #endif + +-#define DEV_DSLMOD 1 ++#define DEV_DSLMOD CTL_UNNUMBERED + #define MAX_STR_SIZE 256 + #define DSL_MOD_SIZE 256 + +@@ -299,7 +329,7 @@ static PITIDSLHW_T pIhw; + static volatile int bshutdown; + static char info[MAX_STR_SIZE]; + /* Used for DSL Polling enable */ +-static DECLARE_MUTEX_LOCKED (adsl_sem_overlay); ++static struct semaphore adsl_sem_overlay; + + //kthread_t overlay_thread; + /* end of module wide declars */ +@@ -323,6 +353,14 @@ static int tn7dsl_proc_snr_print (char * + #define gDot1(a) ((a>0)?(a%10):((-a)%10)) + // UR8_MERGE_END CQ11054* + ++int avalanche_request_intr_pacing(int irq_nr, unsigned int blk_num, ++ unsigned int pace_value) ++{ ++ printk("avalanche_request_pacing(%d, %u, %u); // not implemented\n", irq_nr, blk_num, pace_value); ++ return 0; ++} ++ ++ + int os_atoi(const char *pStr) + { + int MulNeg = (*pStr == '-' ? -1 : 1); +@@ -359,39 +397,6 @@ void dprintf (int uDbgLevel, char *szFmt + #endif + } + +-int strcmp(const char *s1, const char *s2) +-{ +- +- int size = strlen(s1); +- +- return(strncmp(s1, s2, size)); +-} +- +-int strncmp(const char *s1, const char *s2, size_t size) +-{ +- int i = 0; +- int max_size = (int)size; +- +- while((s1[i] != 0) && i < max_size) +- { +- if(s2[i] == 0) +- { +- return -1; +- } +- if(s1[i] != s2[i]) +- { +- return 1; +- } +- i++; +- } +- if(s2[i] != 0) +- { +- return 1; +- } +- +- return 0; +-} +- + // * UR8_MERGE_START CQ10640 Jack Zhang + int tn7dsl_dump_dsp_memory(char *input_str) //cph99 + { +@@ -441,101 +446,79 @@ unsigned int shim_osGetCpuFrequency(void + return CpuFrequency; + } + +-int shim_osLoadFWImage(unsigned char *ptr) ++static void avsar_release(struct device *dev) + { +- unsigned int bytesRead; +- mm_segment_t oldfs; +- static struct file *filp; +- unsigned int imageLength=0x5ffff; +- +- +- dgprintf(4, "tn7dsl_read_dsp()\n"); +- +- dgprintf(4,"open file %s\n", DSP_FIRMWARE_PATH); +- +- filp=filp_open(DSP_FIRMWARE_PATH,00,O_RDONLY); +- if(filp ==NULL) +- { +- printk("Failed: Could not open DSP binary file\n"); +- return -1; +- } +- +- if (filp->f_dentry != NULL) +- { +- if (filp->f_dentry->d_inode != NULL) +- { +- printk ("DSP binary filesize = %d bytes\n", +- (int) filp->f_dentry->d_inode->i_size); +- imageLength = (unsigned int)filp->f_dentry->d_inode->i_size + 0x200; +- } +- } +- +- if (filp->f_op->read==NULL) +- return -1; /* File(system) doesn't allow reads */ +- +- /* +- * Disable parameter checking +- */ +- oldfs = get_fs(); +- set_fs(KERNEL_DS); +- +- /* +- * Now read bytes from postion "StartPos" +- */ +- filp->f_pos = 0; +- +- bytesRead = filp->f_op->read(filp,ptr,imageLength,&filp->f_pos); +- +- dgprintf(4,"file length = %d\n", bytesRead); +- +- set_fs(oldfs); +- +- /* +- * Close the file +- */ +- fput(filp); +- +- return bytesRead; ++ printk(KERN_DEBUG "avsar firmware released\n"); + } + ++static struct device avsar = { ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ .bus_id = "vlynq", ++#endif ++ .release = avsar_release, ++}; + +-unsigned int shim_read_overlay_page (void *ptr, unsigned int secOffset, +- unsigned int secLength) ++int shim_osLoadFWImage(unsigned char *ptr) + { +- unsigned int bytesRead; +- mm_segment_t oldfs; +- struct file *filp; +- +- dgprintf(4,"shim_read_overlay_page\n"); +- //dgprintf(4,"sec offset=%d, sec length =%d\n", secOffset, secLength); ++ const struct firmware *fw_entry; ++ size_t size; + +- filp=filp_open(DSP_FIRMWARE_PATH,00,O_RDONLY); +- if(filp ==NULL) +- { +- printk("Failed: Could not open DSP binary file\n"); +- return -1; +- } ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) ++ dev_set_name(&avsar, "avsar"); ++#endif ++ printk("requesting firmware image \"ar0700xx.bin\"\n"); ++ if(device_register(&avsar) < 0) { ++ printk(KERN_ERR ++ "avsar: device_register fails\n"); ++ return -1; ++ } + +- if (filp->f_op->read==NULL) +- return -1; /* File(system) doesn't allow reads */ ++ if(request_firmware(&fw_entry, "ar0700xx.bin", &avsar)) { ++ printk(KERN_ERR ++ "avsar: Firmware not available\n"); ++ device_unregister(&avsar); ++ return -1; ++ } ++ size = fw_entry->size; ++ device_unregister(&avsar); ++ if(size > 0x5ffff) { ++ printk(KERN_ERR ++ "avsar: Firmware too big (%d bytes)\n", size); ++ release_firmware(fw_entry); ++ return -1; ++ } ++ memcpy(ptr, fw_entry->data, size); ++ release_firmware(fw_entry); ++ return size; ++} + +- /* +- * Now read bytes from postion "StartPos" +- */ ++unsigned int shim_read_overlay_page(void *ptr, unsigned int secOffset, unsigned int secLength) ++{ ++ const struct firmware *fw_entry; + +- if(filp->f_op->llseek) +- filp->f_op->llseek(filp,secOffset, 0); +- oldfs = get_fs(); +- set_fs(KERNEL_DS); +- filp->f_pos = secOffset; +- bytesRead = filp->f_op->read(filp,ptr,secLength,&filp->f_pos); ++ printk("requesting firmware image \"ar0700xx.bin\"\n"); ++ if(device_register(&avsar) < 0) { ++ printk(KERN_ERR ++ "avsar: device_register fails\n"); ++ return -1; ++ } + +- set_fs(oldfs); +- /* +- * Close the file +- */ +- fput(filp); +- return bytesRead; ++ if(request_firmware(&fw_entry, "ar0700xx.bin", &avsar)) { ++ printk(KERN_ERR ++ "avsar: Firmware not available\n"); ++ device_unregister(&avsar); ++ return -1; ++ } ++ device_unregister(&avsar); ++ if(fw_entry->size > secLength) { ++ printk(KERN_ERR ++ "avsar: Firmware too big (%d bytes)\n", fw_entry->size); ++ release_firmware(fw_entry); ++ return -1; ++ } ++ memcpy(ptr + secOffset, fw_entry->data, secLength); ++ release_firmware(fw_entry); ++ return secLength; + } + + int shim_osLoadDebugFWImage(unsigned char *ptr) +@@ -2845,98 +2828,82 @@ static int tn7dsl_set_dsl(void) + (unsigned int *) &offset, + (unsigned char *) &oamFeature, 4); + +- /* Do only if we are in the new Base PSP 7.4.*/ +- #if ((PSP_VERSION_MAJOR == 7) && (PSP_VERSION_MINOR == 4)) +- /* Check to see if we are operating in the new bit mode. */ +- ptr = prom_getenv("DSL_BIT_TMODE"); +- if (ptr) +- { +- /* If we are see if this is the first time the user has upgraded. */ +- ptr = prom_getenv("DSL_UPG_DONE"); +- if(!ptr) +- { +- /* If it is the first time the user is upgrading, then make sure that +- we clear the modulation environment variable, as this could potentially +- not have the same meaning in the new mode. +- */ +- prom_unsetenv("modulation"); +- prom_setenv("DSL_UPG_DONE", "1"); +- } +- } +- #endif +- + // modulation + ptr = prom_getenv("modulation"); +- if (ptr) ++ if (ptr || mp_modulation != NULL) + { +- tn7dsl_set_modulation(ptr, FALSE); ++ tn7dsl_set_modulation(mp_modulation == NULL ? ptr : mp_modulation, FALSE); + } + + // Fine Gains + ptr = prom_getenv("fine_gain_control"); +- if (ptr) ++ if (ptr || mp_fine_gain_control != -1) + { +- value = os_atoi(ptr); ++ value = mp_fine_gain_control == -1 ? os_atoi(ptr) : mp_fine_gain_control; + tn7dsl_ctrl_fineGain(value); + } + ptr = NULL; + ptr = prom_getenv("fine_gain_value"); +- if(ptr) +- tn7dsl_set_fineGainValue(os_atoh(ptr)); ++ if(ptr || mp_fine_gain_value != -1) ++ tn7dsl_set_fineGainValue(mp_fine_gain_value == -1 ? os_atoh(ptr) : mp_fine_gain_value); + + // margin retrain + ptr = NULL; + ptr = prom_getenv("enable_margin_retrain"); +- if(ptr) ++ value = mp_enable_margin_retrain == -1 ? (ptr ? os_atoi(ptr) : 0) : mp_enable_margin_retrain; ++ ++ if (value == 1) + { +- value = os_atoi(ptr); +- if(value == 1) ++ dslhal_api_setMarginMonitorFlags(pIhw, 0, 1); ++ bMarginRetrainEnable = 1; ++ //printk("enable showtime margin monitor.\n"); ++ ++ ptr = NULL; ++ ptr = prom_getenv("margin_threshold"); ++ value = mp_margin_threshold == -1 ? (ptr ? os_atoi(ptr) : 0) : mp_margin_threshold; ++ ++ if(value >= 0) + { +- dslhal_api_setMarginMonitorFlags(pIhw, 0, 1); +- bMarginRetrainEnable = 1; +- //printk("enable showtime margin monitor.\n"); +- ptr = NULL; +- ptr = prom_getenv("margin_threshold"); +- if(ptr) +- { +- value = os_atoi(ptr); +- //printk("Set margin threshold to %d x 0.5 db\n",value); +- if(value >= 0) +- { +- dslhal_api_setMarginThreshold(pIhw, value); +- bMarginThConfig=1; +- } +- } ++ dslhal_api_setMarginThreshold(pIhw, value); ++ bMarginThConfig=1; + } + } + + // rate adapt + ptr = NULL; + ptr = prom_getenv("enable_rate_adapt"); +- if(ptr) ++ if(ptr || mp_enable_rate_adapt != -1) + { +- dslhal_api_setRateAdaptFlag(pIhw, os_atoi(ptr)); ++ dslhal_api_setRateAdaptFlag(pIhw, mp_enable_rate_adapt == -1 ? os_atoi(ptr) : mp_enable_rate_adapt); ++ } ++ ++ // set powercutback ++ ptr = NULL; ++ ptr = prom_getenv("powercutback"); ++ if(ptr || mp_powercutback != -1) ++ { ++ dslhal_advcfg_onOffPcb(pIhw, mp_powercutback == -1 ? os_atoi(ptr) : mp_powercutback); + } + + // trellis + ptr = NULL; + ptr = prom_getenv("trellis"); +- if(ptr) ++ if(ptr || mp_trellis != -1) + { +- dslhal_api_setTrellisFlag(pIhw, os_atoi(ptr)); +- trellis = os_atoi(ptr); ++ trellis = mp_trellis == -1 ? os_atoi(ptr) : mp_trellis; ++ dslhal_api_setTrellisFlag(pIhw, trellis); + //printk("trellis=%d\n"); + } + + // bitswap + ptr = NULL; + ptr = prom_getenv("bitswap"); +- if(ptr) ++ if(ptr || mp_bitswap != -1) + { + int offset[2] = {33, 0}; + unsigned int bitswap; + +- bitswap = os_atoi(ptr); ++ bitswap = mp_bitswap == -1 ? os_atoi(ptr) : mp_bitswap; + + tn7dsl_generic_read(2, offset); + dslReg &= dslhal_support_byteSwap32(0xFFFFFF00); +@@ -2954,46 +2921,47 @@ static int tn7dsl_set_dsl(void) + // maximum bits per carrier + ptr = NULL; + ptr = prom_getenv("maximum_bits_per_carrier"); +- if(ptr) ++ if(ptr || mp_maximum_bits_per_carrier != -1) + { +- dslhal_api_setMaxBitsPerCarrierUpstream(pIhw, os_atoi(ptr)); ++ dslhal_api_setMaxBitsPerCarrierUpstream(pIhw, mp_maximum_bits_per_carrier == -1 ? os_atoi(ptr) : mp_maximum_bits_per_carrier); + } + + // maximum interleave depth + ptr = NULL; + ptr = prom_getenv("maximum_interleave_depth"); +- if(ptr) ++ if(ptr || mp_maximum_interleave_depth != -1) + { +- dslhal_api_setMaxInterleaverDepth(pIhw, os_atoi(ptr)); ++ dslhal_api_setMaxInterleaverDepth(pIhw, mp_maximum_interleave_depth == -1 ? os_atoi(ptr) : mp_maximum_interleave_depth); + } + + // inner and outer pairs + ptr = NULL; + ptr = prom_getenv("pair_selection"); +- if(ptr) ++ if(ptr || mp_pair_selection != -1) + { +- dslhal_api_selectInnerOuterPair(pIhw, os_atoi(ptr)); ++ dslhal_api_selectInnerOuterPair(pIhw, mp_pair_selection == -1 ? os_atoi(ptr) : mp_pair_selection); + } + + ptr = NULL; + ptr = prom_getenv("dgas_polarity"); +- if(ptr) ++ if(ptr || mp_dgas_polarity != -1) + { + dslhal_api_configureDgaspLpr(pIhw, 1, 1); +- dslhal_api_configureDgaspLpr(pIhw, 0, os_atoi(ptr)); ++ dslhal_api_configureDgaspLpr(pIhw, 0, mp_dgas_polarity == -1 ? os_atoi(ptr) : mp_dgas_polarity); + } + + ptr = NULL; + ptr = prom_getenv("los_alarm"); +- if(ptr) ++ if(ptr || mp_los_alarm != -1) + { +- dslhal_api_disableLosAlarm(pIhw, os_atoi(ptr)); ++ dslhal_api_disableLosAlarm(pIhw, mp_los_alarm == -1 ? os_atoi(ptr) : mp_los_alarm); + } + + ptr = NULL; + ptr = prom_getenv("eoc_vendor_id"); +- if(ptr) ++ if(ptr || mp_eoc_vendor_id != NULL) + { ++ ptr = mp_eoc_vendor_id == NULL ? ptr : mp_eoc_vendor_id; + for(i=0;i<8;i++) + { + tmp[0]=ptr[i*2]; +@@ -3018,26 +2986,26 @@ static int tn7dsl_set_dsl(void) + } + ptr = NULL; + ptr = prom_getenv("eoc_vendor_revision"); +- if(ptr) ++ if(ptr || mp_eoc_vendor_revision != -1) + { +- value = os_atoi(ptr); ++ value = mp_eoc_vendor_revision == -1 ? os_atoi(ptr) : mp_eoc_vendor_revision; + //printk("eoc rev=%d\n", os_atoi(ptr)); + dslhal_api_setEocRevisionNumber(pIhw, (char *)&value); + + } + ptr = NULL; + ptr = prom_getenv("eoc_vendor_serialnum"); +- if(ptr) ++ if(ptr || mp_eoc_vendor_serialnum != NULL) + { +- dslhal_api_setEocSerialNumber(pIhw, ptr); ++ dslhal_api_setEocSerialNumber(pIhw, mp_eoc_vendor_serialnum == NULL ? ptr : mp_eoc_vendor_serialnum); + } + + // CQ10037 Added invntry_vernum environment variable to be able to set version number in ADSL2, ADSL2+ modes. + ptr = NULL; + ptr = prom_getenv("invntry_vernum"); +- if(ptr) ++ if(ptr || mp_invntry_vernum != NULL) + { +- dslhal_api_setEocRevisionNumber(pIhw, ptr); ++ dslhal_api_setEocRevisionNumber(pIhw, mp_invntry_vernum == NULL ? ptr : mp_invntry_vernum); + } + + return 0; +@@ -3064,6 +3032,7 @@ int tn7dsl_init(void *priv) + int high_precision_selected = 0; + // UR8_MERGE_END CQ11054* + ++ sema_init(&adsl_sem_overlay, 0); + /* + * start dsl + */ +@@ -3081,7 +3050,7 @@ int tn7dsl_init(void *priv) + * backward compatibility. + */ + cp = prom_getenv("DSL_BIT_TMODE"); +- if (cp) ++ if (cp || mp_dsl_bit_tmode != -1) + { + printk("%s : env var DSL_BIT_TMODE is set\n", __FUNCTION__); + /* +@@ -3110,9 +3079,9 @@ int tn7dsl_init(void *priv) + + // UR8_MERGE_START CQ11054 Jack Zhang + cp = prom_getenv("high_precision"); +- if (cp) ++ if (cp || mp_high_precision != -1) + { +- high_precision_selected = os_atoi(cp); ++ high_precision_selected = mp_high_precision == -1 ? os_atoi(cp) : mp_high_precision; + } + if ( high_precision_selected) + { +@@ -3442,7 +3411,7 @@ static int dslmod_sysctl(ctl_table *ctl, + */ + if(write) + { +- ret = proc_dostring(ctl, write, filp, buffer, lenp); ++ ret = proc_dostring(ctl, write, buffer, lenp, filp); + + switch (ctl->ctl_name) + { +@@ -3528,14 +3497,14 @@ static int dslmod_sysctl(ctl_table *ctl, + else + { + len += sprintf(info+len, mod_req); +- ret = proc_dostring(ctl, write, filp, buffer, lenp); ++ ret = proc_dostring(ctl, write, buffer, lenp, filp); + } + return ret; + } + + + ctl_table dslmod_table[] = { +- {DEV_DSLMOD, "dslmod", info, DSL_MOD_SIZE, 0644, NULL, &dslmod_sysctl} ++ {DEV_DSLMOD, "dslmod", info, DSL_MOD_SIZE, 0644, NULL, NULL, &dslmod_sysctl, &sysctl_string} + , + {0} + }; +@@ -3558,8 +3527,7 @@ void tn7dsl_dslmod_sysctl_register(void) + if (initialized == 1) + return; + +- dslmod_sysctl_header = register_sysctl_table(dslmod_root_table, 1); +- dslmod_root_table->child->de->owner = THIS_MODULE; ++ dslmod_sysctl_header = register_sysctl_table(dslmod_root_table); + + /* + * set the defaults +@@ -4821,4 +4789,4 @@ int tn7dsl_proc_PMDus(char* buf, char ** + } + #endif //NO_ADV_STATS + #endif //TR69_PMD_IN +-// * UR8_MERGE_END CQ11057 * +\ No newline at end of file ++// * UR8_MERGE_END CQ11057 * diff --git a/package/sangam-atm/patches/patch-tn7sar_c b/package/sangam-atm/patches/patch-tn7sar_c new file mode 100644 index 000000000..4f9f587e3 --- /dev/null +++ b/package/sangam-atm/patches/patch-tn7sar_c @@ -0,0 +1,79 @@ +--- sangam-atm-1.0.orig/tn7sar.c 2007-05-18 09:46:30.000000000 +0200 ++++ sangam-atm-1.0/tn7sar.c 2009-12-17 19:10:27.628421613 +0100 +@@ -42,7 +42,6 @@ + * UR8_MERGE_END CQ10700 + *******************************************************************************/ + +-#include + #include + #include + #include +@@ -50,12 +49,19 @@ + #include + #include + #include +-#include +-#include + #include + #include + #include ++#include + ++#include ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) ++#include ++#include ++#else ++#include ++#include ++#endif + + #define _CPHAL_AAL5 + #define _CPHAL_SAR +@@ -74,6 +80,8 @@ typedef void OS_SETUP; + /* PDSP Firmware files */ + #include "tnetd7300_sar_firm.h" + ++extern int mp_oam_lb_timeout; ++extern int mp_autopvc_enable; + + enum + { +@@ -103,10 +111,10 @@ enum + + #define RESERVED_OAM_CHANNEL 15 + +-#define AAL5_PARM "id=aal5, base = 0x03000000, offset = 0, int_line=15, ch0=[RxBufSize=1522; RxNumBuffers = 32; RxServiceMax = 50; TxServiceMax=50; TxNumBuffers=32; CpcsUU=0x5aa5; TxVc_CellRate=0x3000; TxVc_AtmHeader=0x00000640]" +-#define SAR_PARM "id=sar,base = 0x03000000, reset_bit = 9, offset = 0; UniNni = 0, PdspEnable = 1" ++#define CH0_PARM "RxBufSize=1522, RxNumBuffers=32, RxServiceMax=50, TxServiceMax=50, TxNumBuffers=32, CpcsUU=0x5aa5, TxVc_CellRate=0x3000, TxVc_AtmHeader=0x00000640" ++#define AAL5_PARM "id=aal5, base=0x03000000, offset=0, int_line=15, ch0=[" CH0_PARM "]" ++#define SAR_PARM "id=sar, base=0x03000000, reset_bit=9, offset=0; UniNni=0, PdspEnable=1, Debug=0xFFFFFFFF" + #define RESET_PARM "id=ResetControl, base=0xA8611600" +-#define CH0_PARM "RxBufSize=1522, RxNumBuffers = 32, RxServiceMax = 50, TxServiceMax=50, TxNumBuffers=32, CpcsUU=0x5aa5, TxVc_CellRate=0x3000, TxVc_AtmHeader=0x00000640" + + #define MAX_PVC_TABLE_ENTRY 16 + +@@ -817,9 +825,9 @@ int tn7sar_setup_oam_channel(Tn7AtmPriva + pHalDev = (HAL_DEVICE *)priv->pSarHalDev; + + pauto_pvc = prom_getenv("autopvc_enable"); +- if(pauto_pvc) //CQ10273 ++ if(pauto_pvc || mp_autopvc_enable != -1) //CQ10273 + { +- auto_pvc =tn7sar_strtoul(pauto_pvc, NULL, 10); ++ auto_pvc = mp_autopvc_enable == -1 ? tn7sar_strtoul(pauto_pvc, NULL, 10) : mp_autopvc_enable; + } + + memset(&chInfo, 0xff, sizeof(chInfo)); +@@ -985,9 +993,9 @@ int tn7sar_init(struct atm_dev *dev, Tn7 + + /* read in oam lb timeout value */ + pLbTimeout = prom_getenv("oam_lb_timeout"); +- if(pLbTimeout) ++ if(pLbTimeout || mp_oam_lb_timeout != -1) + { +- lbTimeout =tn7sar_strtoul(pLbTimeout, NULL, 10); ++ lbTimeout = mp_oam_lb_timeout == -1 ? tn7sar_strtoul(pLbTimeout, NULL, 10) : mp_oam_lb_timeout; + oamLbTimeout = lbTimeout; + pHalFunc->Control(pHalDev,"OamLbTimeout", "Set", &lbTimeout); + } -- cgit v1.2.3