From 8e662a391ec4d384473d4cc9e31a907cba078cb4 Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Sun, 10 Nov 2013 14:35:23 +0100 Subject: support for mips64 big endian --- package/microperl/files/uconfig.h.mips64 | 4462 ++++++++++++++++++++++++++++++ 1 file changed, 4462 insertions(+) create mode 100644 package/microperl/files/uconfig.h.mips64 (limited to 'package/microperl') diff --git a/package/microperl/files/uconfig.h.mips64 b/package/microperl/files/uconfig.h.mips64 new file mode 100644 index 000000000..0d50f91aa --- /dev/null +++ b/package/microperl/files/uconfig.h.mips64 @@ -0,0 +1,4462 @@ +/* + * This file was produced by running the config_h.SH script, which + * gets its values from config.sh, which is generally produced by + * running Configure. + * + * Feel free to modify any of this as the need arises. Note, however, + * that running config_h.SH again will wipe out any changes you've made. + * For a more permanent change edit config.sh and rerun config_h.SH. + * + * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ + */ + +/* + * Package name : perl5 + * Source directory : . + * Configuration time: Mon Sep 14 22:24:11 CEST 2009 + * Configured by : OpenADK + * Target system : linux linux 2.6.30.5 #4 smp fri sep 11 13:47:48 cest 2009 x86_64 unknown + */ + +#ifndef _config_h_ +#define _config_h_ + +/* LOC_SED: + * This symbol holds the complete pathname to the sed program. + */ +#define LOC_SED "/bin/sed" /**/ + +/* HAS_ALARM: + * This symbol, if defined, indicates that the alarm routine is + * available. + */ +#define HAS_ALARM /**/ + +/* HAS_BCMP: + * This symbol is defined if the bcmp() routine is available to + * compare blocks of memory. + */ +/*#define HAS_BCMP / **/ + +/* HAS_BCOPY: + * This symbol is defined if the bcopy() routine is available to + * copy blocks of memory. + */ +/*#define HAS_BCOPY / **/ + +/* HAS_BZERO: + * This symbol is defined if the bzero() routine is available to + * set a memory block to 0. + */ +/*#define HAS_BZERO / **/ + +/* HAS_CHOWN: + * This symbol, if defined, indicates that the chown routine is + * available. + */ +#define HAS_CHOWN /**/ + +/* HAS_CHROOT: + * This symbol, if defined, indicates that the chroot routine is + * available. + */ +#define HAS_CHROOT /**/ + +/* HAS_CHSIZE: + * This symbol, if defined, indicates that the chsize routine is available + * to truncate files. You might need a -lx to get this routine. + */ +/*#define HAS_CHSIZE / **/ + +/* HAS_CTERMID: + * This symbol, if defined, indicates that the ctermid routine is + * available to generate filename for terminal. + */ +#define HAS_CTERMID /**/ + +/* HAS_CUSERID: + * This symbol, if defined, indicates that the cuserid routine is + * available to get character login names. + */ +#define HAS_CUSERID /**/ + +/* HAS_DBL_DIG: + * This symbol, if defined, indicates that this system's + * or defines the symbol DBL_DIG, which is the number + * of significant digits in a double precision number. If this + * symbol is not defined, a guess of 15 is usually pretty good. + */ +#define HAS_DBL_DIG /* */ + +/* HAS_DIFFTIME: + * This symbol, if defined, indicates that the difftime routine is + * available. + */ +#define HAS_DIFFTIME /**/ + +/* HAS_DLERROR: + * This symbol, if defined, indicates that the dlerror routine is + * available to return a string describing the last error that + * occurred from a call to dlopen(), dlclose() or dlsym(). + */ +/*#define HAS_DLERROR / **/ + +/* HAS_DUP2: + * This symbol, if defined, indicates that the dup2 routine is + * available to duplicate file descriptors. + */ +#define HAS_DUP2 /**/ + +/* HAS_FCHMOD: + * This symbol, if defined, indicates that the fchmod routine is available + * to change mode of opened files. If unavailable, use chmod(). + */ +#define HAS_FCHMOD /**/ + +/* HAS_FCHOWN: + * This symbol, if defined, indicates that the fchown routine is available + * to change ownership of opened files. If unavailable, use chown(). + */ +#define HAS_FCHOWN /**/ + +/* HAS_FCNTL: + * This symbol, if defined, indicates to the C program that + * the fcntl() function exists. + */ +#define HAS_FCNTL /**/ + +/* HAS_FGETPOS: + * This symbol, if defined, indicates that the fgetpos routine is + * available to get the file position indicator, similar to ftell(). + */ +#define HAS_FGETPOS /**/ + +/* HAS_FLOCK: + * This symbol, if defined, indicates that the flock routine is + * available to do file locking. + */ +#define HAS_FLOCK /**/ + +/* HAS_FORK: + * This symbol, if defined, indicates that the fork routine is + * available. + */ +#define HAS_FORK /**/ + +/* HAS_FSETPOS: + * This symbol, if defined, indicates that the fsetpos routine is + * available to set the file position indicator, similar to fseek(). + */ +#define HAS_FSETPOS /**/ + +/* HAS_GETTIMEOFDAY: + * This symbol, if defined, indicates that the gettimeofday() system + * call is available for a sub-second accuracy clock. Usually, the file + * needs to be included (see I_SYS_RESOURCE). + * The type "Timeval" should be used to refer to "struct timeval". + */ +#define HAS_GETTIMEOFDAY /**/ +#ifdef HAS_GETTIMEOFDAY +#define Timeval struct timeval /* Structure used by gettimeofday() */ +#endif + +/* HAS_GETGROUPS: + * This symbol, if defined, indicates that the getgroups() routine is + * available to get the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +#define HAS_GETGROUPS /**/ + +/* HAS_GETLOGIN: + * This symbol, if defined, indicates that the getlogin routine is + * available to get the login name. + */ +#define HAS_GETLOGIN /**/ + +/* HAS_GETPGID: + * This symbol, if defined, indicates to the C program that + * the getpgid(pid) function is available to get the + * process group id. + */ +#define HAS_GETPGID /**/ + +/* HAS_GETPGRP2: + * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) + * routine is available to get the current process group. + */ +/*#define HAS_GETPGRP2 / **/ + +/* HAS_GETPPID: + * This symbol, if defined, indicates that the getppid routine is + * available to get the parent process ID. + */ +#define HAS_GETPPID /**/ + +/* HAS_GETPRIORITY: + * This symbol, if defined, indicates that the getpriority routine is + * available to get a process's priority. + */ +#define HAS_GETPRIORITY /**/ + +/* HAS_INET_ATON: + * This symbol, if defined, indicates to the C program that the + * inet_aton() function is available to parse IP address "dotted-quad" + * strings. + */ +#define HAS_INET_ATON /**/ + +/* HAS_KILLPG: + * This symbol, if defined, indicates that the killpg routine is available + * to kill process groups. If unavailable, you probably should use kill + * with a negative process number. + */ +#define HAS_KILLPG /**/ + +/* HAS_LINK: + * This symbol, if defined, indicates that the link routine is + * available to create hard links. + */ +#define HAS_LINK /**/ + +/* HAS_LOCALECONV: + * This symbol, if defined, indicates that the localeconv routine is + * available for numeric and monetary formatting conventions. + */ +#define HAS_LOCALECONV /**/ + +/* HAS_LOCKF: + * This symbol, if defined, indicates that the lockf routine is + * available to do file locking. + */ +#define HAS_LOCKF /**/ + +/* HAS_LSTAT: + * This symbol, if defined, indicates that the lstat routine is + * available to do file stats on symbolic links. + */ +#define HAS_LSTAT /**/ + +/* HAS_MBLEN: + * This symbol, if defined, indicates that the mblen routine is available + * to find the number of bytes in a multibye character. + */ +#define HAS_MBLEN /**/ + +/* HAS_MBSTOWCS: + * This symbol, if defined, indicates that the mbstowcs routine is + * available to covert a multibyte string into a wide character string. + */ +#define HAS_MBSTOWCS /**/ + +/* HAS_MBTOWC: + * This symbol, if defined, indicates that the mbtowc routine is available + * to covert a multibyte to a wide character. + */ +#define HAS_MBTOWC /**/ + +/* HAS_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * to compare blocks of memory. + */ +#define HAS_MEMCMP /**/ + +/* HAS_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy blocks of memory. + */ +#define HAS_MEMCPY /**/ + +/* HAS_MEMMOVE: + * This symbol, if defined, indicates that the memmove routine is available + * to copy potentially overlapping blocks of memory. This should be used + * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your + * own version. + */ +#define HAS_MEMMOVE /**/ + +/* HAS_MEMSET: + * This symbol, if defined, indicates that the memset routine is available + * to set blocks of memory. + */ +#define HAS_MEMSET /**/ + +/* HAS_MKDIR: + * This symbol, if defined, indicates that the mkdir routine is available + * to create directories. Otherwise you should fork off a new process to + * exec /bin/mkdir. + */ +#define HAS_MKDIR /**/ + +/* HAS_MKFIFO: + * This symbol, if defined, indicates that the mkfifo routine is + * available to create FIFOs. Otherwise, mknod should be able to + * do it for you. However, if mkfifo is there, mknod might require + * super-user privileges which mkfifo will not. + */ +#define HAS_MKFIFO /**/ + +/* HAS_MKTIME: + * This symbol, if defined, indicates that the mktime routine is + * available. + */ +#define HAS_MKTIME /**/ + +/* HAS_MSYNC: + * This symbol, if defined, indicates that the msync system call is + * available to synchronize a mapped file. + */ +#define HAS_MSYNC /**/ + +/* HAS_MUNMAP: + * This symbol, if defined, indicates that the munmap system call is + * available to unmap a region, usually mapped by mmap(). + */ +#define HAS_MUNMAP /**/ + +/* HAS_NICE: + * This symbol, if defined, indicates that the nice routine is + * available. + */ +#define HAS_NICE /**/ + +/* HAS_PATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given filename. + */ +/* HAS_FPATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given open file descriptor. + */ +#define HAS_PATHCONF /**/ +#define HAS_FPATHCONF /**/ + +/* HAS_PAUSE: + * This symbol, if defined, indicates that the pause routine is + * available to suspend a process until a signal is received. + */ +#define HAS_PAUSE /**/ + +/* HAS_PIPE: + * This symbol, if defined, indicates that the pipe routine is + * available to create an inter-process channel. + */ +#define HAS_PIPE /**/ + +/* HAS_READDIR: + * This symbol, if defined, indicates that the readdir routine is + * available to read directory entries. You may have to include + * . See I_DIRENT. + */ +#define HAS_READDIR /**/ + +/* HAS_SEEKDIR: + * This symbol, if defined, indicates that the seekdir routine is + * available. You may have to include . See I_DIRENT. + */ +#define HAS_SEEKDIR /**/ + +/* HAS_TELLDIR: + * This symbol, if defined, indicates that the telldir routine is + * available. You may have to include . See I_DIRENT. + */ +#define HAS_TELLDIR /**/ + +/* HAS_REWINDDIR: + * This symbol, if defined, indicates that the rewinddir routine is + * available. You may have to include . See I_DIRENT. + */ +#define HAS_REWINDDIR /**/ + +/* HAS_READLINK: + * This symbol, if defined, indicates that the readlink routine is + * available to read the value of a symbolic link. + */ +#define HAS_READLINK /**/ + +/* HAS_RENAME: + * This symbol, if defined, indicates that the rename routine is available + * to rename files. Otherwise you should do the unlink(), link(), unlink() + * trick. + */ +#define HAS_RENAME /**/ + +/* HAS_RMDIR: + * This symbol, if defined, indicates that the rmdir routine is + * available to remove directories. Otherwise you should fork off a + * new process to exec /bin/rmdir. + */ +#define HAS_RMDIR /**/ + +/* HAS_SELECT: + * This symbol, if defined, indicates that the select routine is + * available to select active file descriptors. If the timeout field + * is used, may need to be included. + */ +#define HAS_SELECT /**/ + +/* HAS_SETEGID: + * This symbol, if defined, indicates that the setegid routine is available + * to change the effective gid of the current program. + */ +#define HAS_SETEGID /**/ + +/* HAS_SETEUID: + * This symbol, if defined, indicates that the seteuid routine is available + * to change the effective uid of the current program. + */ +#define HAS_SETEUID /**/ + +/* HAS_SETLINEBUF: + * This symbol, if defined, indicates that the setlinebuf routine is + * available to change stderr or stdout from block-buffered or unbuffered + * to a line-buffered mode. + */ +#define HAS_SETLINEBUF /**/ + +/* HAS_SETLOCALE: + * This symbol, if defined, indicates that the setlocale routine is + * available to handle locale-specific ctype implementations. + */ +#define HAS_SETLOCALE /**/ + +/* HAS_SETPGID: + * This symbol, if defined, indicates that the setpgid(pid, gpid) + * routine is available to set process group ID. + */ +#define HAS_SETPGID /**/ + +/* HAS_SETPGRP2: + * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) + * routine is available to set the current process group. + */ +/*#define HAS_SETPGRP2 / **/ + +/* HAS_SETPRIORITY: + * This symbol, if defined, indicates that the setpriority routine is + * available to set a process's priority. + */ +#define HAS_SETPRIORITY /**/ + +/* HAS_SETREGID: + * This symbol, if defined, indicates that the setregid routine is + * available to change the real and effective gid of the current + * process. + */ +/* HAS_SETRESGID: + * This symbol, if defined, indicates that the setresgid routine is + * available to change the real, effective and saved gid of the current + * process. + */ +#define HAS_SETREGID /**/ +#define HAS_SETRESGID /**/ + +/* HAS_SETREUID: + * This symbol, if defined, indicates that the setreuid routine is + * available to change the real and effective uid of the current + * process. + */ +/* HAS_SETRESUID: + * This symbol, if defined, indicates that the setresuid routine is + * available to change the real, effective and saved uid of the current + * process. + */ +#define HAS_SETREUID /**/ +#define HAS_SETRESUID /**/ + +/* HAS_SETRGID: + * This symbol, if defined, indicates that the setrgid routine is available + * to change the real gid of the current program. + */ +/*#define HAS_SETRGID / **/ + +/* HAS_SETRUID: + * This symbol, if defined, indicates that the setruid routine is available + * to change the real uid of the current program. + */ +/*#define HAS_SETRUID / **/ + +/* HAS_SETSID: + * This symbol, if defined, indicates that the setsid routine is + * available to set the process group ID. + */ +#define HAS_SETSID /**/ + +/* HAS_STRCHR: + * This symbol is defined to indicate that the strchr()/strrchr() + * functions are available for string searching. If not, try the + * index()/rindex() pair. + */ +/* HAS_INDEX: + * This symbol is defined to indicate that the index()/rindex() + * functions are available for string searching. + */ +#define HAS_STRCHR /**/ +/*#define HAS_INDEX / **/ + +/* HAS_STRCOLL: + * This symbol, if defined, indicates that the strcoll routine is + * available to compare strings using collating information. + */ +#define HAS_STRCOLL /**/ + +/* HAS_STRTOD: + * This symbol, if defined, indicates that the strtod routine is + * available to provide better numeric string conversion than atof(). + */ +#define HAS_STRTOD /**/ + +/* HAS_STRTOL: + * This symbol, if defined, indicates that the strtol routine is available + * to provide better numeric string conversion than atoi() and friends. + */ +#define HAS_STRTOL /**/ + +/* HAS_STRXFRM: + * This symbol, if defined, indicates that the strxfrm() routine is + * available to transform strings. + */ +#define HAS_STRXFRM /**/ + +/* HAS_SYMLINK: + * This symbol, if defined, indicates that the symlink routine is available + * to create symbolic links. + */ +#define HAS_SYMLINK /**/ + +/* HAS_SYSCALL: + * This symbol, if defined, indicates that the syscall routine is + * available to call arbitrary system calls. If undefined, that's tough. + */ +#define HAS_SYSCALL /**/ + +/* HAS_SYSCONF: + * This symbol, if defined, indicates that sysconf() is available + * to determine system related limits and options. + */ +#define HAS_SYSCONF /**/ + +/* HAS_SYSTEM: + * This symbol, if defined, indicates that the system routine is + * available to issue a shell command. + */ +#define HAS_SYSTEM /**/ + +/* HAS_TCGETPGRP: + * This symbol, if defined, indicates that the tcgetpgrp routine is + * available to get foreground process group ID. + */ +#define HAS_TCGETPGRP /**/ + +/* HAS_TCSETPGRP: + * This symbol, if defined, indicates that the tcsetpgrp routine is + * available to set foreground process group ID. + */ +#define HAS_TCSETPGRP /**/ + +/* HAS_TRUNCATE: + * This symbol, if defined, indicates that the truncate routine is + * available to truncate files. + */ +#define HAS_TRUNCATE /**/ + +/* HAS_TZNAME: + * This symbol, if defined, indicates that the tzname[] array is + * available to access timezone names. + */ +#define HAS_TZNAME /**/ + +/* HAS_UMASK: + * This symbol, if defined, indicates that the umask routine is + * available to set and get the value of the file creation mask. + */ +#define HAS_UMASK /**/ + +/* HAS_USLEEP: + * This symbol, if defined, indicates that the usleep routine is + * available to let the process sleep on a sub-second accuracy. + */ +#define HAS_USLEEP /**/ + +/* HAS_WAIT4: + * This symbol, if defined, indicates that wait4() exists. + */ +#define HAS_WAIT4 /**/ + +/* HAS_WAITPID: + * This symbol, if defined, indicates that the waitpid routine is + * available to wait for child process. + */ +#define HAS_WAITPID /**/ + +/* HAS_WCSTOMBS: + * This symbol, if defined, indicates that the wcstombs routine is + * available to convert wide character strings to multibyte strings. + */ +#define HAS_WCSTOMBS /**/ + +/* HAS_WCTOMB: + * This symbol, if defined, indicates that the wctomb routine is available + * to covert a wide character to a multibyte. + */ +#define HAS_WCTOMB /**/ + +/* I_ARPA_INET: + * This symbol, if defined, indicates to the C program that it should + * include to get inet_addr and friends declarations. + */ +#define I_ARPA_INET /**/ + +/* I_DBM: + * This symbol, if defined, indicates that exists and should + * be included. + */ +/* I_RPCSVC_DBM: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_DBM / **/ +/*#define I_RPCSVC_DBM / **/ + +/* I_DLFCN: + * This symbol, if defined, indicates that exists and should + * be included. + */ +#define I_DLFCN /**/ + +/* I_FCNTL: + * This manifest constant tells the C program to include . + */ +/*#define I_FCNTL / **/ + +/* I_FLOAT: + * This symbol, if defined, indicates to the C program that it should + * include to get definition of symbols like DBL_MAX or + * DBL_MIN, i.e. machine dependent floating point values. + */ +#define I_FLOAT /**/ + +/* I_GDBM: + * This symbol, if defined, indicates that exists and should + * be included. + */ +/*#define I_GDBM / **/ + +/* I_LIMITS: + * This symbol, if defined, indicates to the C program that it should + * include to get definition of symbols like WORD_BIT or + * LONG_MAX, i.e. machine dependant limitations. + */ +#define I_LIMITS /**/ + +/* I_LOCALE: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_LOCALE /**/ + +/* I_MATH: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_MATH /**/ + +/* I_MEMORY: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_MEMORY / **/ + +/* I_NET_ERRNO: + * This symbol, if defined, indicates that exists and + * should be included. + */ +/*#define I_NET_ERRNO / **/ + +/* I_NETINET_IN: + * This symbol, if defined, indicates to the C program that it should + * include . Otherwise, you may try . + */ +#define I_NETINET_IN /**/ + +/* I_SFIO: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_SFIO / **/ + +/* I_STDDEF: + * This symbol, if defined, indicates that exists and should + * be included. + */ +#define I_STDDEF /**/ + +/* I_STDLIB: + * This symbol, if defined, indicates that exists and should + * be included. + */ +#define I_STDLIB /**/ + +/* I_STRING: + * This symbol, if defined, indicates to the C program that it should + * include (USG systems) instead of (BSD systems). + */ +#define I_STRING /**/ + +/* I_SYS_DIR: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_DIR /**/ + +/* I_SYS_FILE: + * This symbol, if defined, indicates to the C program that it should + * include to get definition of R_OK and friends. + */ +#define I_SYS_FILE /**/ + +/* I_SYS_IOCTL: + * This symbol, if defined, indicates that exists and should + * be included. Otherwise, include or . + */ +/* I_SYS_SOCKIO: + * This symbol, if defined, indicates the should be included + * to get socket ioctl options, like SIOCATMARK. + */ +#define I_SYS_IOCTL /**/ +/*#define I_SYS_SOCKIO / **/ + +/* I_SYS_NDIR: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/*#define I_SYS_NDIR / **/ + +/* I_SYS_PARAM: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_PARAM /**/ + +/* I_SYS_RESOURCE: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_RESOURCE /**/ + +/* I_SYS_SELECT: + * This symbol, if defined, indicates to the C program that it should + * include in order to get definition of struct timeval. + */ +#define I_SYS_SELECT /**/ + +/* I_SYS_STAT: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_STAT /**/ + +/* I_SYS_TIMES: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_TIMES /**/ + +/* I_SYS_TYPES: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_TYPES /**/ + +/* I_SYS_UN: + * This symbol, if defined, indicates to the C program that it should + * include to get UNIX domain socket definitions. + */ +#define I_SYS_UN /**/ + +/* I_SYS_WAIT: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_SYS_WAIT /**/ + +/* I_TERMIO: + * This symbol, if defined, indicates that the program should include + * rather than . There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/* I_TERMIOS: + * This symbol, if defined, indicates that the program should include + * the POSIX termios.h rather than sgtty.h or termio.h. + * There are also differences in the ioctl() calls that depend on the + * value of this symbol. + */ +/* I_SGTTY: + * This symbol, if defined, indicates that the program should include + * rather than . There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/*#define I_TERMIO / **/ +#define I_TERMIOS /**/ +/*#define I_SGTTY / **/ + +/* I_UNISTD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_UNISTD /**/ + +/* I_UTIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#define I_UTIME /**/ + +/* I_VALUES: + * This symbol, if defined, indicates to the C program that it should + * include to get definition of symbols like MINFLOAT or + * MAXLONG, i.e. machine dependant limitations. Probably, you + * should use instead, if it is available. + */ +#define I_VALUES /**/ + +/* I_VFORK: + * This symbol, if defined, indicates to the C program that it should + * include vfork.h. + */ +/*#define I_VFORK / **/ + +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE 4 /**/ +#define LONGSIZE 8 /**/ +#define SHORTSIZE 2 /**/ + +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. + */ +/*#define MULTIARCH / **/ + +/* HAS_QUAD: + * This symbol, if defined, tells that there's a 64-bit integer type, + * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one + * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. + */ +#define HAS_QUAD /**/ +#ifdef HAS_QUAD +# define Quad_t long /**/ +# define Uquad_t unsigned long /**/ +# define QUADKIND 2 /**/ +# define QUAD_IS_INT 1 +# define QUAD_IS_LONG 2 +# define QUAD_IS_LONG_LONG 3 +# define QUAD_IS_INT64_T 4 +#endif + +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +/* OSVERS: + * This symbol contains the version of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +#define OSNAME "linux" /**/ +#define OSVERS "2.6.30.5" /**/ + +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for perl5. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define ARCHLIB "/usr/lib/perl5/5.10.0/x86_64-linux" /**/ +#define ARCHLIB_EXP "/usr/lib/perl5/5.10.0/x86_64-linux" /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "x86_64-linux" /**/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. + */ +/* PERL_RELOCATABLE_INC: + * This symbol, if defined, indicates that we'd like to relocate entries + * in @INC at run time based on the location of the perl binary. + */ +#define BIN "/usr/bin" /**/ +#define BIN_EXP "/usr/bin" /**/ +#define PERL_RELOCATABLE_INC "undef" /**/ + +/* CAT2: + * This macro concatenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#if 42 == 1 +#define CAT2(a,b) a/**/b +#define STRINGIFY(a) "a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if 42 == 42 +#define PeRl_CaTiFy(a, b) a ## b +#define PeRl_StGiFy(a) #a +/* the additional level of indirection enables these macros to be + * used as arguments to other macros. See K&R 2nd ed., page 231. */ +#define CAT2(a,b) PeRl_CaTiFy(a,b) +#define StGiFy(a) PeRl_StGiFy(a) +#define STRINGIFY(a) PeRl_StGiFy(a) +#endif +#if 42 != 1 && 42 != 42 +# include "Bletch: How does this C preprocessor concatenate tokens?" +#endif + +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +/* CPPLAST: + * This symbol is intended to be used along with CPPRUN in the same manner + * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". + */ +#define CPPSTDIN "gcc -E" +#define CPPMINUS "-" +#define CPPRUN "gcc -E" +#define CPPLAST "-" + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +#define HAS_ACCESS /**/ + +/* HAS_ACCESSX: + * This symbol, if defined, indicates that the accessx routine is + * available to do extended access checks. + */ +/*#define HAS_ACCESSX / **/ + +/* HAS_ASCTIME_R: + * This symbol, if defined, indicates that the asctime_r routine + * is available to asctime re-entrantly. + */ +/* ASCTIME_R_PROTO: + * This symbol encodes the prototype of asctime_r. + * It is zero if d_asctime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r + * is defined. + */ +/*#define HAS_ASCTIME_R / **/ +#define ASCTIME_R_PROTO 0 /**/ + +/* HASATTRIBUTE_FORMAT: + * Can we handle GCC attribute for checking printf-style formats + */ +/* PRINTF_FORMAT_NULL_OK: + * Allows __printf__ format to be null when checking printf-style + */ +/* HASATTRIBUTE_MALLOC: + * Can we handle GCC attribute for malloc-style functions. + */ +/* HASATTRIBUTE_NONNULL: + * Can we handle GCC attribute for nonnull function parms. + */ +/* HASATTRIBUTE_NORETURN: + * Can we handle GCC attribute for functions that do not return + */ +/* HASATTRIBUTE_PURE: + * Can we handle GCC attribute for pure functions + */ +/* HASATTRIBUTE_UNUSED: + * Can we handle GCC attribute for unused variables and arguments + */ +/* HASATTRIBUTE_WARN_UNUSED_RESULT: + * Can we handle GCC attribute for warning on unused results + */ +#define HASATTRIBUTE_FORMAT /**/ +/*#define PRINTF_FORMAT_NULL_OK / **/ +#define HASATTRIBUTE_NORETURN /**/ +#define HASATTRIBUTE_MALLOC /**/ +#define HASATTRIBUTE_NONNULL /**/ +#define HASATTRIBUTE_PURE /**/ +#define HASATTRIBUTE_UNUSED /**/ +#define HASATTRIBUTE_WARN_UNUSED_RESULT /**/ + +/* HASCONST: + * This symbol, if defined, indicates that this C compiler knows about + * the const type. There is no need to actually test for that symbol + * within your programs. The mere use of the "const" keyword will + * trigger the necessary tests. + */ +#define HASCONST /**/ +#ifndef HASCONST +#define const +#endif + +/* HAS_CRYPT: + * This symbol, if defined, indicates that the crypt routine is available + * to encrypt passwords and the like. + */ +/*#define HAS_CRYPT / **/ + +/* HAS_CRYPT_R: + * This symbol, if defined, indicates that the crypt_r routine + * is available to crypt re-entrantly. + */ +/* CRYPT_R_PROTO: + * This symbol encodes the prototype of crypt_r. + * It is zero if d_crypt_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r + * is defined. + */ +/*#define HAS_CRYPT_R / **/ +#define CRYPT_R_PROTO 0 /**/ + +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. + */ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +/*#define HAS_CSH / **/ +#ifdef HAS_CSH +#define CSH "csh" /**/ +#endif + +/* HAS_CTERMID_R: + * This symbol, if defined, indicates that the ctermid_r routine + * is available to ctermid re-entrantly. + */ +/* CTERMID_R_PROTO: + * This symbol encodes the prototype of ctermid_r. + * It is zero if d_ctermid_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r + * is defined. + */ +/*#define HAS_CTERMID_R / **/ +#define CTERMID_R_PROTO 0 /**/ + +/* HAS_CTIME_R: + * This symbol, if defined, indicates that the ctime_r routine + * is available to ctime re-entrantly. + */ +/* CTIME_R_PROTO: + * This symbol encodes the prototype of ctime_r. + * It is zero if d_ctime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r + * is defined. + */ +/*#define HAS_CTIME_R / **/ +#define CTIME_R_PROTO 0 /**/ + +/* SETUID_SCRIPTS_ARE_SECURE_NOW: + * This symbol, if defined, indicates that the bug that prevents + * setuid scripts from being secure is not present in this kernel. + */ +/* DOSUID: + * This symbol, if defined, indicates that the C program should + * check the script that it is executing for setuid/setgid bits, and + * attempt to emulate setuid/setgid on systems that have disabled + * setuid #! scripts because the kernel can't do it securely. + * It is up to the package designer to make sure that this emulation + * is done securely. Among other things, it should do an fstat on + * the script it just opened to make sure it really is a setuid/setgid + * script, it should make sure the arguments passed correspond exactly + * to the argument on the #! line, and it should not trust any + * subprocesses to which it must pass the filename rather than the + * file descriptor of the script to be executed. + */ +/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/ +/*#define DOSUID / **/ + +/* HAS_DRAND48_R: + * This symbol, if defined, indicates that the drand48_r routine + * is available to drand48 re-entrantly. + */ +/* DRAND48_R_PROTO: + * This symbol encodes the prototype of drand48_r. + * It is zero if d_drand48_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r + * is defined. + */ +/*#define HAS_DRAND48_R / **/ +#define DRAND48_R_PROTO 0 /**/ + +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48(void); + */ +#define HAS_DRAND48_PROTO /**/ + +/* HAS_EACCESS: + * This symbol, if defined, indicates that the eaccess routine is + * available to do extended access checks. + */ +/*#define HAS_EACCESS / **/ + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. + */ +#define HAS_ENDGRENT /**/ + +/* HAS_ENDGRENT_R: + * This symbol, if defined, indicates that the endgrent_r routine + * is available to endgrent re-entrantly. + */ +/* ENDGRENT_R_PROTO: + * This symbol encodes the prototype of endgrent_r. + * It is zero if d_endgrent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r + * is defined. + */ +/*#define HAS_ENDGRENT_R / **/ +#define ENDGRENT_R_PROTO 0 /**/ + +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. + */ +#define HAS_ENDHOSTENT /**/ + +/* HAS_ENDHOSTENT_R: + * This symbol, if defined, indicates that the endhostent_r routine + * is available to endhostent re-entrantly. + */ +/* ENDHOSTENT_R_PROTO: + * This symbol encodes the prototype of endhostent_r. + * It is zero if d_endhostent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r + * is defined. + */ +/*#define HAS_ENDHOSTENT_R / **/ +#define ENDHOSTENT_R_PROTO 0 /**/ + +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. + */ +#define HAS_ENDNETENT /**/ + +/* HAS_ENDNETENT_R: + * This symbol, if defined, indicates that the endnetent_r routine + * is available to endnetent re-entrantly. + */ +/* ENDNETENT_R_PROTO: + * This symbol encodes the prototype of endnetent_r. + * It is zero if d_endnetent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r + * is defined. + */ +/*#define HAS_ENDNETENT_R / **/ +#define ENDNETENT_R_PROTO 0 /**/ + +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. + */ +#define HAS_ENDPROTOENT /**/ + +/* HAS_ENDPROTOENT_R: + * This symbol, if defined, indicates that the endprotoent_r routine + * is available to endprotoent re-entrantly. + */ +/* ENDPROTOENT_R_PROTO: + * This symbol encodes the prototype of endprotoent_r. + * It is zero if d_endprotoent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r + * is defined. + */ +/*#define HAS_ENDPROTOENT_R / **/ +#define ENDPROTOENT_R_PROTO 0 /**/ + +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. + */ +#define HAS_ENDPWENT /**/ + +/* HAS_ENDPWENT_R: + * This symbol, if defined, indicates that the endpwent_r routine + * is available to endpwent re-entrantly. + */ +/* ENDPWENT_R_PROTO: + * This symbol encodes the prototype of endpwent_r. + * It is zero if d_endpwent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r + * is defined. + */ +/*#define HAS_ENDPWENT_R / **/ +#define ENDPWENT_R_PROTO 0 /**/ + +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. + */ +#define HAS_ENDSERVENT /**/ + +/* HAS_ENDSERVENT_R: + * This symbol, if defined, indicates that the endservent_r routine + * is available to endservent re-entrantly. + */ +/* ENDSERVENT_R_PROTO: + * This symbol encodes the prototype of endservent_r. + * It is zero if d_endservent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r + * is defined. + */ +/*#define HAS_ENDSERVENT_R / **/ +#define ENDSERVENT_R_PROTO 0 /**/ + +/* FLEXFILENAMES: + * This symbol, if defined, indicates that the system supports filenames + * longer than 14 characters. + */ +#define FLEXFILENAMES /**/ + +/* HAS_GETGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for sequential access of the group database. + */ +#define HAS_GETGRENT /**/ + +/* HAS_GETGRENT_R: + * This symbol, if defined, indicates that the getgrent_r routine + * is available to getgrent re-entrantly. + */ +/* GETGRENT_R_PROTO: + * This symbol encodes the prototype of getgrent_r. + * It is zero if d_getgrent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r + * is defined. + */ +/*#define HAS_GETGRENT_R / **/ +#define GETGRENT_R_PROTO 0 /**/ + +/* HAS_GETGRGID_R: + * This symbol, if defined, indicates that the getgrgid_r routine + * is available to getgrgid re-entrantly. + */ +/* GETGRGID_R_PROTO: + * This symbol encodes the prototype of getgrgid_r. + * It is zero if d_getgrgid_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r + * is defined. + */ +/*#define HAS_GETGRGID_R / **/ +#define GETGRGID_R_PROTO 0 /**/ + +/* HAS_GETGRNAM_R: + * This symbol, if defined, indicates that the getgrnam_r routine + * is available to getgrnam re-entrantly. + */ +/* GETGRNAM_R_PROTO: + * This symbol encodes the prototype of getgrnam_r. + * It is zero if d_getgrnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r + * is defined. + */ +/*#define HAS_GETGRNAM_R / **/ +#define GETGRNAM_R_PROTO 0 /**/ + +/* HAS_GETHOSTBYADDR: + * This symbol, if defined, indicates that the gethostbyaddr() routine is + * available to look up hosts by their IP addresses. + */ +#define HAS_GETHOSTBYADDR /**/ + +/* HAS_GETHOSTBYNAME: + * This symbol, if defined, indicates that the gethostbyname() routine is + * available to look up host names in some data base or other. + */ +#define HAS_GETHOSTBYNAME /**/ + +/* HAS_GETHOSTENT: + * This symbol, if defined, indicates that the gethostent() routine is + * available to look up host names in some data base or another. + */ +#define HAS_GETHOSTENT /**/ + +/* HAS_GETHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * gethostname() routine to derive the host name. See also HAS_UNAME + * and PHOSTNAME. + */ +/* HAS_UNAME: + * This symbol, if defined, indicates that the C program may use the + * uname() routine to derive the host name. See also HAS_GETHOSTNAME + * and PHOSTNAME. + */ +/* PHOSTNAME: + * This symbol, if defined, indicates the command to feed to the + * popen() routine to derive the host name. See also HAS_GETHOSTNAME + * and HAS_UNAME. Note that the command uses a fully qualified path, + * so that it is safe even if used by a process with super-user + * privileges. + */ +/* HAS_PHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * contents of PHOSTNAME as a command to feed to the popen() routine + * to derive the host name. + */ +#define HAS_GETHOSTNAME /**/ +#define HAS_UNAME /**/ +/*#define HAS_PHOSTNAME / **/ +#ifdef HAS_PHOSTNAME +#define PHOSTNAME "/bin/hostname" /* How to get the host name */ +#endif + +/* HAS_GETHOSTBYADDR_R: + * This symbol, if defined, indicates that the gethostbyaddr_r routine + * is available to gethostbyaddr re-entrantly. + */ +/* GETHOSTBYADDR_R_PROTO: + * This symbol encodes the prototype of gethostbyaddr_r. + * It is zero if d_gethostbyaddr_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r + * is defined. + */ +/*#define HAS_GETHOSTBYADDR_R / **/ +#define GETHOSTBYADDR_R_PROTO 0 /**/ + +/* HAS_GETHOSTBYNAME_R: + * This symbol, if defined, indicates that the gethostbyname_r routine + * is available to gethostbyname re-entrantly. + */ +/* GETHOSTBYNAME_R_PROTO: + * This symbol encodes the prototype of gethostbyname_r. + * It is zero if d_gethostbyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r + * is defined. + */ +/*#define HAS_GETHOSTBYNAME_R / **/ +#define GETHOSTBYNAME_R_PROTO 0 /**/ + +/* HAS_GETHOSTENT_R: + * This symbol, if defined, indicates that the gethostent_r routine + * is available to gethostent re-entrantly. + */ +/* GETHOSTENT_R_PROTO: + * This symbol encodes the prototype of gethostent_r. + * It is zero if d_gethostent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r + * is defined. + */ +/*#define HAS_GETHOSTENT_R / **/ +#define GETHOSTENT_R_PROTO 0 /**/ + +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETHOST_PROTOS /**/ + +/* HAS_GETLOGIN_R: + * This symbol, if defined, indicates that the getlogin_r routine + * is available to getlogin re-entrantly. + */ +/* GETLOGIN_R_PROTO: + * This symbol encodes the prototype of getlogin_r. + * It is zero if d_getlogin_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r + * is defined. + */ +/*#define HAS_GETLOGIN_R / **/ +#define GETLOGIN_R_PROTO 0 /**/ + +/* HAS_GETNETBYADDR: + * This symbol, if defined, indicates that the getnetbyaddr() routine is + * available to look up networks by their IP addresses. + */ +#define HAS_GETNETBYADDR /**/ + +/* HAS_GETNETBYNAME: + * This symbol, if defined, indicates that the getnetbyname() routine is + * available to look up networks by their names. + */ +#define HAS_GETNETBYNAME /**/ + +/* HAS_GETNETENT: + * This symbol, if defined, indicates that the getnetent() routine is + * available to look up network names in some data base or another. + */ +#define HAS_GETNETENT /**/ + +/* HAS_GETNETBYADDR_R: + * This symbol, if defined, indicates that the getnetbyaddr_r routine + * is available to getnetbyaddr re-entrantly. + */ +/* GETNETBYADDR_R_PROTO: + * This symbol encodes the prototype of getnetbyaddr_r. + * It is zero if d_getnetbyaddr_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r + * is defined. + */ +/*#define HAS_GETNETBYADDR_R / **/ +#define GETNETBYADDR_R_PROTO 0 /**/ + +/* HAS_GETNETBYNAME_R: + * This symbol, if defined, indicates that the getnetbyname_r routine + * is available to getnetbyname re-entrantly. + */ +/* GETNETBYNAME_R_PROTO: + * This symbol encodes the prototype of getnetbyname_r. + * It is zero if d_getnetbyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r + * is defined. + */ +/*#define HAS_GETNETBYNAME_R / **/ +#define GETNETBYNAME_R_PROTO 0 /**/ + +/* HAS_GETNETENT_R: + * This symbol, if defined, indicates that the getnetent_r routine + * is available to getnetent re-entrantly. + */ +/* GETNETENT_R_PROTO: + * This symbol encodes the prototype of getnetent_r. + * It is zero if d_getnetent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r + * is defined. + */ +/*#define HAS_GETNETENT_R / **/ +#define GETNETENT_R_PROTO 0 /**/ + +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETNET_PROTOS /**/ + +/* HAS_GETPROTOENT: + * This symbol, if defined, indicates that the getprotoent() routine is + * available to look up protocols in some data base or another. + */ +#define HAS_GETPROTOENT /**/ + +/* HAS_GETPGRP: + * This symbol, if defined, indicates that the getpgrp routine is + * available to get the current process group. + */ +/* USE_BSD_GETPGRP: + * This symbol, if defined, indicates that getpgrp needs one + * arguments whereas USG one needs none. + */ +#define HAS_GETPGRP /**/ +/*#define USE_BSD_GETPGRP / **/ + +/* HAS_GETPROTOBYNAME: + * This symbol, if defined, indicates that the getprotobyname() + * routine is available to look up protocols by their name. + */ +/* HAS_GETPROTOBYNUMBER: + * This symbol, if defined, indicates that the getprotobynumber() + * routine is available to look up protocols by their number. + */ +#define HAS_GETPROTOBYNAME /**/ +#define HAS_GETPROTOBYNUMBER /**/ + +/* HAS_GETPROTOBYNAME_R: + * This symbol, if defined, indicates that the getprotobyname_r routine + * is available to getprotobyname re-entrantly. + */ +/* GETPROTOBYNAME_R_PROTO: + * This symbol encodes the prototype of getprotobyname_r. + * It is zero if d_getprotobyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r + * is defined. + */ +/*#define HAS_GETPROTOBYNAME_R / **/ +#define GETPROTOBYNAME_R_PROTO 0 /**/ + +/* HAS_GETPROTOBYNUMBER_R: + * This symbol, if defined, indicates that the getprotobynumber_r routine + * is available to getprotobynumber re-entrantly. + */ +/* GETPROTOBYNUMBER_R_PROTO: + * This symbol encodes the prototype of getprotobynumber_r. + * It is zero if d_getprotobynumber_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r + * is defined. + */ +/*#define HAS_GETPROTOBYNUMBER_R / **/ +#define GETPROTOBYNUMBER_R_PROTO 0 /**/ + +/* HAS_GETPROTOENT_R: + * This symbol, if defined, indicates that the getprotoent_r routine + * is available to getprotoent re-entrantly. + */ +/* GETPROTOENT_R_PROTO: + * This symbol encodes the prototype of getprotoent_r. + * It is zero if d_getprotoent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r + * is defined. + */ +/*#define HAS_GETPROTOENT_R / **/ +#define GETPROTOENT_R_PROTO 0 /**/ + +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETPROTO_PROTOS /**/ + +/* HAS_GETPWENT: + * This symbol, if defined, indicates that the getpwent routine is + * available for sequential access of the passwd database. + * If this is not available, the older getpw() function may be available. + */ +#define HAS_GETPWENT /**/ + +/* HAS_GETPWENT_R: + * This symbol, if defined, indicates that the getpwent_r routine + * is available to getpwent re-entrantly. + */ +/* GETPWENT_R_PROTO: + * This symbol encodes the prototype of getpwent_r. + * It is zero if d_getpwent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r + * is defined. + */ +/*#define HAS_GETPWENT_R / **/ +#define GETPWENT_R_PROTO 0 /**/ + +/* HAS_GETPWNAM_R: + * This symbol, if defined, indicates that the getpwnam_r routine + * is available to getpwnam re-entrantly. + */ +/* GETPWNAM_R_PROTO: + * This symbol encodes the prototype of getpwnam_r. + * It is zero if d_getpwnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r + * is defined. + */ +/*#define HAS_GETPWNAM_R / **/ +#define GETPWNAM_R_PROTO 0 /**/ + +/* HAS_GETPWUID_R: + * This symbol, if defined, indicates that the getpwuid_r routine + * is available to getpwuid re-entrantly. + */ +/* GETPWUID_R_PROTO: + * This symbol encodes the prototype of getpwuid_r. + * It is zero if d_getpwuid_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r + * is defined. + */ +/*#define HAS_GETPWUID_R / **/ +#define GETPWUID_R_PROTO 0 /**/ + +/* HAS_GETSERVENT: + * This symbol, if defined, indicates that the getservent() routine is + * available to look up network services in some data base or another. + */ +#define HAS_GETSERVENT /**/ + +/* HAS_GETSERVBYNAME_R: + * This symbol, if defined, indicates that the getservbyname_r routine + * is available to getservbyname re-entrantly. + */ +/* GETSERVBYNAME_R_PROTO: + * This symbol encodes the prototype of getservbyname_r. + * It is zero if d_getservbyname_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r + * is defined. + */ +/*#define HAS_GETSERVBYNAME_R / **/ +#define GETSERVBYNAME_R_PROTO 0 /**/ + +/* HAS_GETSERVBYPORT_R: + * This symbol, if defined, indicates that the getservbyport_r routine + * is available to getservbyport re-entrantly. + */ +/* GETSERVBYPORT_R_PROTO: + * This symbol encodes the prototype of getservbyport_r. + * It is zero if d_getservbyport_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r + * is defined. + */ +/*#define HAS_GETSERVBYPORT_R / **/ +#define GETSERVBYPORT_R_PROTO 0 /**/ + +/* HAS_GETSERVENT_R: + * This symbol, if defined, indicates that the getservent_r routine + * is available to getservent re-entrantly. + */ +/* GETSERVENT_R_PROTO: + * This symbol encodes the prototype of getservent_r. + * It is zero if d_getservent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r + * is defined. + */ +/*#define HAS_GETSERVENT_R / **/ +#define GETSERVENT_R_PROTO 0 /**/ + +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETSERV_PROTOS /**/ + +/* HAS_GETSPNAM_R: + * This symbol, if defined, indicates that the getspnam_r routine + * is available to getspnam re-entrantly. + */ +/* GETSPNAM_R_PROTO: + * This symbol encodes the prototype of getspnam_r. + * It is zero if d_getspnam_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r + * is defined. + */ +/*#define HAS_GETSPNAM_R / **/ +#define GETSPNAM_R_PROTO 0 /**/ + +/* HAS_GETSERVBYNAME: + * This symbol, if defined, indicates that the getservbyname() + * routine is available to look up services by their name. + */ +/* HAS_GETSERVBYPORT: + * This symbol, if defined, indicates that the getservbyport() + * routine is available to look up services by their port. + */ +#define HAS_GETSERVBYNAME /**/ +#define HAS_GETSERVBYPORT /**/ + +/* HAS_GMTIME_R: + * This symbol, if defined, indicates that the gmtime_r routine + * is available to gmtime re-entrantly. + */ +/* GMTIME_R_PROTO: + * This symbol encodes the prototype of gmtime_r. + * It is zero if d_gmtime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r + * is defined. + */ +/*#define HAS_GMTIME_R / **/ +#define GMTIME_R_PROTO 0 /**/ + +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. + */ +#define HAS_HTONL /**/ +#define HAS_HTONS /**/ +#define HAS_NTOHL /**/ +#define HAS_NTOHS /**/ + +/* HAS_LOCALTIME_R: + * This symbol, if defined, indicates that the localtime_r routine + * is available to localtime re-entrantly. + */ +/* LOCALTIME_R_NEEDS_TZSET: + * Many libc's localtime_r implementations do not call tzset, + * making them differ from localtime(), and making timezone + * changes using $ENV{TZ} without explicitly calling tzset + * impossible. This symbol makes us call tzset before localtime_r + */ +/*#define LOCALTIME_R_NEEDS_TZSET / **/ +#ifdef LOCALTIME_R_NEEDS_TZSET +#define L_R_TZSET tzset(), +#else +#define L_R_TZSET +#endif + +/* LOCALTIME_R_PROTO: + * This symbol encodes the prototype of localtime_r. + * It is zero if d_localtime_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r + * is defined. + */ +/*#define HAS_LOCALTIME_R / **/ +#define LOCALTIME_R_PROTO 0 /**/ + +/* HAS_LONG_DOUBLE: + * This symbol will be defined if the C compiler supports long + * doubles. + */ +/* LONG_DOUBLESIZE: + * This symbol contains the size of a long double, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long doubles. + */ +#define HAS_LONG_DOUBLE /**/ +#ifdef HAS_LONG_DOUBLE +#define LONG_DOUBLESIZE 16 /**/ +#endif + +/* HAS_LONG_LONG: + * This symbol will be defined if the C compiler supports long long. + */ +/* LONGLONGSIZE: + * This symbol contains the size of a long long, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long long. + */ +#define HAS_LONG_LONG /**/ +#ifdef HAS_LONG_LONG +#define LONGLONGSIZE 8 /**/ +#endif + +/* HAS_LSEEK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the lseek() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern off_t lseek(int, off_t, int); + */ +#define HAS_LSEEK_PROTO /**/ + +/* HAS_MEMCHR: + * This symbol, if defined, indicates that the memchr routine is available + * to locate characters within a C string. + */ +#define HAS_MEMCHR /**/ + +/* HAS_MKSTEMP: + * This symbol, if defined, indicates that the mkstemp routine is + * available to exclusively create and open a uniquely named + * temporary file. + */ +#define HAS_MKSTEMP /**/ + +/* HAS_MMAP: + * This symbol, if defined, indicates that the mmap system call is + * available to map a file into memory. + */ +/* Mmap_t: + * This symbol holds the return type of the mmap() system call + * (and simultaneously the type of the first argument). + * Usually set to 'void *' or 'caddr_t'. + */ +#define HAS_MMAP /**/ +#define Mmap_t void * /**/ + +/* HAS_MSG: + * This symbol, if defined, indicates that the entire msg*(2) library is + * supported (IPC mechanism based on message queues). + */ +#define HAS_MSG /**/ + +/* HAS_POLL: + * This symbol, if defined, indicates that the poll routine is + * available to poll active file descriptors. You may safely + * include when both this symbol *and* I_POLL are defined. + */ +#define HAS_POLL /**/ + +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. + */ +/*#define OLD_PTHREAD_CREATE_JOINABLE / **/ + +/* HAS_PTHREAD_ATFORK: + * This symbol, if defined, indicates that the pthread_atfork routine + * is available to setup fork handlers. + */ +/*#define HAS_PTHREAD_ATFORK / **/ + +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. + */ +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/*#define HAS_PTHREAD_YIELD / **/ +#define SCHED_YIELD sched_yield() /**/ +#define HAS_SCHED_YIELD /**/ + +/* HAS_RANDOM_R: + * This symbol, if defined, indicates that the random_r routine + * is available to random re-entrantly. + */ +/* RANDOM_R_PROTO: + * This symbol encodes the prototype of random_r. + * It is zero if d_random_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r + * is defined. + */ +/*#define HAS_RANDOM_R / **/ +#define RANDOM_R_PROTO 0 /**/ + +/* HAS_READDIR64_R: + * This symbol, if defined, indicates that the readdir64_r routine + * is available to readdir64 re-entrantly. + */ +/* READDIR64_R_PROTO: + * This symbol encodes the prototype of readdir64_r. + * It is zero if d_readdir64_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r + * is defined. + */ +/*#define HAS_READDIR64_R / **/ +#define READDIR64_R_PROTO 0 /**/ + +/* HAS_READDIR_R: + * This symbol, if defined, indicates that the readdir_r routine + * is available to readdir re-entrantly. + */ +/* READDIR_R_PROTO: + * This symbol encodes the prototype of readdir_r. + * It is zero if d_readdir_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r + * is defined. + */ +/*#define HAS_READDIR_R / **/ +#define READDIR_R_PROTO 0 /**/ + +/* HAS_SEM: + * This symbol, if defined, indicates that the entire sem*(2) library is + * supported. + */ +#define HAS_SEM /**/ + +/* HAS_SETGRENT: + * This symbol, if defined, indicates that the setgrent routine is + * available for initializing sequential access of the group database. + */ +#define HAS_SETGRENT /**/ + +/* HAS_SETGRENT_R: + * This symbol, if defined, indicates that the setgrent_r routine + * is available to setgrent re-entrantly. + */ +/* SETGRENT_R_PROTO: + * This symbol encodes the prototype of setgrent_r. + * It is zero if d_setgrent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r + * is defined. + */ +/*#define HAS_SETGRENT_R / **/ +#define SETGRENT_R_PROTO 0 /**/ + +/* HAS_SETGROUPS: + * This symbol, if defined, indicates that the setgroups() routine is + * available to set the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +#define HAS_SETGROUPS /**/ + +/* HAS_SETHOSTENT: + * This symbol, if defined, indicates that the sethostent() routine is + * available. + */ +#define HAS_SETHOSTENT /**/ + +/* HAS_SETHOSTENT_R: + * This symbol, if defined, indicates that the sethostent_r routine + * is available to sethostent re-entrantly. + */ +/* SETHOSTENT_R_PROTO: + * This symbol encodes the prototype of sethostent_r. + * It is zero if d_sethostent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r + * is defined. + */ +/*#define HAS_SETHOSTENT_R / **/ +#define SETHOSTENT_R_PROTO 0 /**/ + +/* HAS_SETLOCALE_R: + * This symbol, if defined, indicates that the setlocale_r routine + * is available to setlocale re-entrantly. + */ +/* SETLOCALE_R_PROTO: + * This symbol encodes the prototype of setlocale_r. + * It is zero if d_setlocale_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r + * is defined. + */ +/*#define HAS_SETLOCALE_R / **/ +#define SETLOCALE_R_PROTO 0 /**/ + +/* HAS_SETNETENT: + * This symbol, if defined, indicates that the setnetent() routine is + * available. + */ +#define HAS_SETNETENT /**/ + +/* HAS_SETNETENT_R: + * This symbol, if defined, indicates that the setnetent_r routine + * is available to setnetent re-entrantly. + */ +/* SETNETENT_R_PROTO: + * This symbol encodes the prototype of setnetent_r. + * It is zero if d_setnetent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r + * is defined. + */ +/*#define HAS_SETNETENT_R / **/ +#define SETNETENT_R_PROTO 0 /**/ + +/* HAS_SETPROTOENT: + * This symbol, if defined, indicates that the setprotoent() routine is + * available. + */ +#define HAS_SETPROTOENT /**/ + +/* HAS_SETPGRP: + * This symbol, if defined, indicates that the setpgrp routine is + * available to set the current process group. + */ +/* USE_BSD_SETPGRP: + * This symbol, if defined, indicates that setpgrp needs two + * arguments whereas USG one needs none. See also HAS_SETPGID + * for a POSIX interface. + */ +#define HAS_SETPGRP /**/ +/*#define USE_BSD_SETPGRP / **/ + +/* HAS_SETPROTOENT_R: + * This symbol, if defined, indicates that the setprotoent_r routine + * is available to setprotoent re-entrantly. + */ +/* SETPROTOENT_R_PROTO: + * This symbol encodes the prototype of setprotoent_r. + * It is zero if d_setprotoent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r + * is defined. + */ +/*#define HAS_SETPROTOENT_R / **/ +#define SETPROTOENT_R_PROTO 0 /**/ + +/* HAS_SETPWENT: + * This symbol, if defined, indicates that the setpwent routine is + * available for initializing sequential access of the passwd database. + */ +#define HAS_SETPWENT /**/ + +/* HAS_SETPWENT_R: + * This symbol, if defined, indicates that the setpwent_r routine + * is available to setpwent re-entrantly. + */ +/* SETPWENT_R_PROTO: + * This symbol encodes the prototype of setpwent_r. + * It is zero if d_setpwent_r is undef, and one of the + * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r + * is defined. + */ +/*#define HAS_SETPWENT_R / **/ +#define SETPWENT_R_PROTO 0 /**/ + +/* HAS_SETSERVENT: + * This symbol, if defined, indicates that the setservent() routine is + * available. + */ +#define HAS_SETSERVENT /**/ + +/* HAS_SETSERVENT_R: + * This symbol, if defined, indicates that the setservent_r routine + * is available to setservent re-entrantly. + */ +/* SETSERVENT_R_PROTO: + * This symbol encodes the prototype of setservent_r. + * It is zero i