From 1dbfbd6e0c5c2738f2f8d3b9b8ff0a3a9dc4e529 Mon Sep 17 00:00:00 2001
From: Waldemar Brodkorb <wbx@openadk.org>
Date: Sat, 26 Feb 2011 14:18:52 +0100
Subject: c++ compiler fixes
when C++ compiler is disabled by user, do not allow to
compile packages , which require a C++ compiler.
Older libtool unnecessary checks for c++ tools, so
regenerate autotool stuff.
---
package/libvorbis/patches/autotool.patch | 64687 ++++++++++++++++++++++++++
package/libvorbis/patches/patch-Makefile_in | 12 -
package/libvorbis/patches/patch-ltmain_sh | 11 -
3 files changed, 64687 insertions(+), 23 deletions(-)
create mode 100644 package/libvorbis/patches/autotool.patch
delete mode 100644 package/libvorbis/patches/patch-Makefile_in
delete mode 100644 package/libvorbis/patches/patch-ltmain_sh
(limited to 'package/libvorbis/patches')
diff --git a/package/libvorbis/patches/autotool.patch b/package/libvorbis/patches/autotool.patch
new file mode 100644
index 000000000..d8e63a67e
--- /dev/null
+++ b/package/libvorbis/patches/autotool.patch
@@ -0,0 +1,64687 @@
+older libtool is unecessary checking for c++
+
+ * remove "examples" subdir from Makefile.am
+ * regen autotool infrastruture via
+ "libtoolize; autoregen -vif; rm -rf automa4te"
+ * add fstack-protector patch manually
+
+diff -Nur libvorbis-1.2.0.orig/aclocal.m4 libvorbis-1.2.0/aclocal.m4
+--- libvorbis-1.2.0.orig/aclocal.m4 2007-07-25 18:46:33.000000000 +0200
++++ libvorbis-1.2.0/aclocal.m4 2011-02-17 18:30:19.313551987 +0100
+@@ -1,7 +1,7 @@
+-# generated automatically by aclocal 1.10 -*- Autoconf -*-
++# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+ # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+-# 2005, 2006 Free Software Foundation, Inc.
++# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+ # This file is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -11,108 +11,196 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
+-m4_if(m4_PACKAGE_VERSION, [2.61],,
+-[m4_fatal([this file was generated for autoconf 2.61.
+-You have another version of autoconf. If you want to use that,
+-you should regenerate the build system entirely.], [63])])
++m4_ifndef([AC_AUTOCONF_VERSION],
++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
++[m4_warning([this file was generated for autoconf 2.65.
++You have another version of autoconf. It may work, but is not guaranteed to.
++If you have problems, you may need to regenerate the build system entirely.
++To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
++#
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++# 2006, 2007, 2008 Free Software Foundation, Inc.
++# Written by Gordon Matzigkeit, 1996
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++m4_define([_LT_COPYING], [dnl
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++# 2006, 2007, 2008 Free Software Foundation, Inc.
++# Written by Gordon Matzigkeit, 1996
++#
++# This file is part of GNU Libtool.
++#
++# GNU Libtool is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# As a special exception to the GNU General Public License,
++# if you distribute this file as part of a program or library that
++# is built using GNU Libtool, you may include this file under the
++# same distribution terms that you use for the rest of that program.
++#
++# GNU Libtool is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with GNU Libtool; see the file COPYING. If not, a copy
++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
++# obtained by writing to the Free Software Foundation, Inc.,
++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++])
+
+-# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
++# serial 56 LT_INIT
+
+
+-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+-# -----------------------------------------------------------
+-# If this macro is not defined by Autoconf, define it here.
+-m4_ifdef([AC_PROVIDE_IFELSE],
+- [],
+- [m4_define([AC_PROVIDE_IFELSE],
+- [m4_ifdef([AC_PROVIDE_$1],
+- [$2], [$3])])])
++# LT_PREREQ(VERSION)
++# ------------------
++# Complain and exit if this libtool version is less that VERSION.
++m4_defun([LT_PREREQ],
++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
++ [m4_default([$3],
++ [m4_fatal([Libtool version $1 or higher is required],
++ 63)])],
++ [$2])])
+
+
+-# AC_PROG_LIBTOOL
+-# ---------------
+-AC_DEFUN([AC_PROG_LIBTOOL],
+-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+- AC_PROVIDE_IFELSE([AC_PROG_CXX],
+- [AC_LIBTOOL_CXX],
+- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+- ])])
+-dnl And a similar setup for Fortran 77 support
+- AC_PROVIDE_IFELSE([AC_PROG_F77],
+- [AC_LIBTOOL_F77],
+- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+-])])
+-
+-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+- [AC_LIBTOOL_GCJ],
+- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+- [AC_LIBTOOL_GCJ],
+- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+- [AC_LIBTOOL_GCJ],
+- [ifdef([AC_PROG_GCJ],
+- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+- ifdef([A][M_PROG_GCJ],
+- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+- ifdef([LT_AC_PROG_GCJ],
+- [define([LT_AC_PROG_GCJ],
+- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+-])])# AC_PROG_LIBTOOL
++# _LT_CHECK_BUILDDIR
++# ------------------
++# Complain if the absolute build directory name contains unusual characters
++m4_defun([_LT_CHECK_BUILDDIR],
++[case `pwd` in
++ *\ * | *\ *)
++ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
++esac
++])
+
+
+-# _AC_PROG_LIBTOOL
+-# ----------------
+-AC_DEFUN([_AC_PROG_LIBTOOL],
+-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
++# LT_INIT([OPTIONS])
++# ------------------
++AC_DEFUN([LT_INIT],
++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
++AC_BEFORE([$0], [LT_LANG])dnl
++AC_BEFORE([$0], [LT_OUTPUT])dnl
++AC_BEFORE([$0], [LTDL_INIT])dnl
++m4_require([_LT_CHECK_BUILDDIR])dnl
++
++dnl Autoconf doesn't catch unexpanded LT_ macros by default:
++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
++dnl unless we require an AC_DEFUNed macro:
++AC_REQUIRE([LTOPTIONS_VERSION])dnl
++AC_REQUIRE([LTSUGAR_VERSION])dnl
++AC_REQUIRE([LTVERSION_VERSION])dnl
++AC_REQUIRE([LTOBSOLETE_VERSION])dnl
++m4_require([_LT_PROG_LTMAIN])dnl
++
++dnl Parse OPTIONS
++_LT_SET_OPTIONS([$0], [$1])
+
+ # This can be used to rebuild libtool when needed
+-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
++LIBTOOL_DEPS="$ltmain"
+
+ # Always use our own libtool.
+ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+ AC_SUBST(LIBTOOL)dnl
+
+-# Prevent multiple expansion
+-define([AC_PROG_LIBTOOL], [])
+-])# _AC_PROG_LIBTOOL
++_LT_SETUP
+
++# Only expand once:
++m4_define([LT_INIT])
++])# LT_INIT
++
++# Old names:
++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
++dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+-# AC_LIBTOOL_SETUP
+-# ----------------
+-AC_DEFUN([AC_LIBTOOL_SETUP],
+-[AC_PREREQ(2.50)dnl
+-AC_REQUIRE([AC_ENABLE_SHARED])dnl
+-AC_REQUIRE([AC_ENABLE_STATIC])dnl
+-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
++
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
++m4_defun([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++ case $cc_temp in
++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++ \-*) ;;
++ *) break;;
++ esac
++done
++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++])
++
++
++# _LT_FILEUTILS_DEFAULTS
++# ----------------------
++# It is okay to use these file commands and assume they have been set
++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
++m4_defun([_LT_FILEUTILS_DEFAULTS],
++[: ${CP="cp -f"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
++])# _LT_FILEUTILS_DEFAULTS
++
++
++# _LT_SETUP
++# ---------
++m4_defun([_LT_SETUP],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++_LT_DECL([], [host_alias], [0], [The host system])dnl
++_LT_DECL([], [host], [0])dnl
++_LT_DECL([], [host_os], [0])dnl
++dnl
++_LT_DECL([], [build_alias], [0], [The build system])dnl
++_LT_DECL([], [build], [0])dnl
++_LT_DECL([], [build_os], [0])dnl
++dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_PROG_LD])dnl
+-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+-AC_REQUIRE([AC_PROG_NM])dnl
+-
++AC_REQUIRE([LT_PATH_LD])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++dnl
+ AC_REQUIRE([AC_PROG_LN_S])dnl
+-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+-AC_REQUIRE([AC_OBJEXT])dnl
+-AC_REQUIRE([AC_EXEEXT])dnl
++test -z "$LN_S" && LN_S="ln -s"
++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+ dnl
++AC_REQUIRE([LT_CMD_MAX_LEN])dnl
++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
++dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_CMD_RELOAD])dnl
++m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CMD_OLD_ARCHIVE])dnl
++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++
++_LT_CONFIG_LIBTOOL_INIT([
++# See if we are running on zsh, and set the options which allow our
++# commands through without removal of \ escapes INIT.
++if test -n "\${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++fi
++])
++if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++fi
+
+-AC_LIBTOOL_SYS_MAX_CMD_LEN
+-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+-AC_LIBTOOL_OBJDIR
++_LT_CHECK_OBJDIR
+
+-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+-_LT_AC_PROG_ECHO_BACKSLASH
++m4_require([_LT_TAG_COMPILER])dnl
++_LT_PROG_ECHO_BACKSLASH
+
+ case $host_os in
+ aix3*)
+@@ -128,4518 +216,3148 @@
+
+ # Sed substitution that helps us do robust quoting. It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e 1s/^X//'
+-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+ # Same as above, but do not quote variable references.
+-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
++double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+ # Sed substitution to delay expansion of an escaped shell variable in a
+ # double_quote_subst'ed string.
+ delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++
+ # Sed substitution to avoid accidental globbing in evaled expressions
+ no_glob_subst='s/\*/\\\*/g'
+
+-# Constants:
+-rm="rm -f"
+-
+ # Global variables:
+-default_ofile=libtool
++ofile=libtool
+ can_build_shared=yes
+
+ # All known linkers require a `.a' archive for static linking (except MSVC,
+ # which needs '.lib').
+ libext=a
+-ltmain="$ac_aux_dir/ltmain.sh"
+-ofile="$default_ofile"
+-with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+-AC_CHECK_TOOL(AR, ar, false)
+-AC_CHECK_TOOL(RANLIB, ranlib, :)
+-AC_CHECK_TOOL(STRIP, strip, :)
++with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+ old_CC="$CC"
+ old_CFLAGS="$CFLAGS"
+
+ # Set sane defaults for various variables
+-test -z "$AR" && AR=ar
+-test -z "$AR_FLAGS" && AR_FLAGS=cru
+-test -z "$AS" && AS=as
+ test -z "$CC" && CC=cc
+ test -z "$LTCC" && LTCC=$CC
+ test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+-test -z "$DLLTOOL" && DLLTOOL=dlltool
+ test -z "$LD" && LD=ld
+-test -z "$LN_S" && LN_S="ln -s"
+-test -z "$MAGIC_CMD" && MAGIC_CMD=file
+-test -z "$NM" && NM=nm
+-test -z "$SED" && SED=sed
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-test -z "$RANLIB" && RANLIB=:
+-test -z "$STRIP" && STRIP=:
+ test -z "$ac_objext" && ac_objext=o
+
+-# Determine commands to create old-style static archives.
+-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+-old_postinstall_cmds='chmod 644 $oldlib'
+-old_postuninstall_cmds=
+-
+-if test -n "$RANLIB"; then
+- case $host_os in
+- openbsd*)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+- ;;
+- *)
+- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+- ;;
+- esac
+- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+-fi
+-
+ _LT_CC_BASENAME([$compiler])
+
+ # Only perform the check for file, if the check method requires it
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
+ case $deplibs_check_method in
+ file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+- AC_PATH_MAGIC
++ _LT_PATH_MAGIC
+ fi
+ ;;
+ esac
+
+-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+-enable_win32_dll=yes, enable_win32_dll=no)
+-
+-AC_ARG_ENABLE([libtool-lock],
+- [AC_HELP_STRING([--disable-libtool-lock],
+- [avoid locking (might break parallel builds)])])
+-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++# Use C for the default configuration in the libtool script
++LT_SUPPORTED_TAG([CC])
++_LT_LANG_C_CONFIG
++_LT_LANG_DEFAULT_CONFIG
++_LT_CONFIG_COMMANDS
++])# _LT_SETUP
+
+-AC_ARG_WITH([pic],
+- [AC_HELP_STRING([--with-pic],
+- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+- [pic_mode="$withval"],
+- [pic_mode=default])
+-test -z "$pic_mode" && pic_mode=default
+
+-# Use C for the default configuration in the libtool script
+-tagname=
+-AC_LIBTOOL_LANG_C_CONFIG
+-_LT_AC_TAGCONFIG
+-])# AC_LIBTOOL_SETUP
++# _LT_PROG_LTMAIN
++# ---------------
++# Note that this code is called both from `configure', and `config.status'
++# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
++# `config.status' has no value for ac_aux_dir unless we are using Automake,
++# so we pass a copy along to make sure it has a sensible value anyway.
++m4_defun([_LT_PROG_LTMAIN],
++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
++ltmain="$ac_aux_dir/ltmain.sh"
++])# _LT_PROG_LTMAIN
+
+
+-# _LT_AC_SYS_COMPILER
+-# -------------------
+-AC_DEFUN([_LT_AC_SYS_COMPILER],
+-[AC_REQUIRE([AC_PROG_CC])dnl
+
+-# If no C compiler was specified, use CC.
+-LTCC=${LTCC-"$CC"}
++# So that we can recreate a full libtool script including additional
++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
++# in macros and then make a single call at the end using the `libtool'
++# label.
+
+-# If no C compiler flags were specified, use CFLAGS.
+-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+-# Allow CC to be a program name with arguments.
+-compiler=$CC
+-])# _LT_AC_SYS_COMPILER
++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
++# ----------------------------------------
++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL_INIT],
++[m4_ifval([$1],
++ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
++ [$1
++])])])
+
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+-# _LT_CC_BASENAME(CC)
+-# -------------------
+-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+-AC_DEFUN([_LT_CC_BASENAME],
+-[for cc_temp in $1""; do
+- case $cc_temp in
+- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+- \-*) ;;
+- *) break;;
+- esac
+-done
+-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++
++# _LT_CONFIG_LIBTOOL([COMMANDS])
++# ------------------------------
++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL],
++[m4_ifval([$1],
++ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
++ [$1
++])])])
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
++
++
++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
++# -----------------------------------------------------
++m4_defun([_LT_CONFIG_SAVE_COMMANDS],
++[_LT_CONFIG_LIBTOOL([$1])
++_LT_CONFIG_LIBTOOL_INIT([$2])
+ ])
+
+
+-# _LT_COMPILER_BOILERPLATE
+-# ------------------------
+-# Check for compiler boilerplate output or warnings with
+-# the simple compiler test code.
+-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
+-[ac_outfile=conftest.$ac_objext
+-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_compiler_boilerplate=`cat conftest.err`
+-$rm conftest*
+-])# _LT_COMPILER_BOILERPLATE
++# _LT_FORMAT_COMMENT([COMMENT])
++# -----------------------------
++# Add leading comment marks to the start of each line, and a trailing
++# full-stop to the whole comment if one is not present already.
++m4_define([_LT_FORMAT_COMMENT],
++[m4_ifval([$1], [
++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
++ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
++)])
+
+
+-# _LT_LINKER_BOILERPLATE
+-# ----------------------
+-# Check for linker boilerplate output or warnings with
+-# the simple link test code.
+-AC_DEFUN([_LT_LINKER_BOILERPLATE],
+-[ac_outfile=conftest.$ac_objext
+-printf "$lt_simple_link_test_code" >conftest.$ac_ext
+-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+-_lt_linker_boilerplate=`cat conftest.err`
+-$rm conftest*
+-])# _LT_LINKER_BOILERPLATE
+
+
+-# _LT_AC_SYS_LIBPATH_AIX
+-# ----------------------
+-# Links a minimal program and checks the executable
+-# for the system default hardcoded library path. In most cases,
+-# this is /usr/lib:/lib, but when the MPI compilers are used
+-# the location of the communication and MPI libs are included too.
+-# If we don't find anything, use the default library path according
+-# to the aix ld manual.
+-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+-}'`
+-# Check for a 64-bit object if we didn't find anything.
+-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+-}'`; fi],[])
+-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+-])# _LT_AC_SYS_LIBPATH_AIX
+
++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
++# -------------------------------------------------------------------
++# CONFIGNAME is the name given to the value in the libtool script.
++# VARNAME is the (base) name used in the configure script.
++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
++# VARNAME. Any other value will be used directly.
++m4_define([_LT_DECL],
++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
++ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
++ [m4_ifval([$1], [$1], [$2])])
++ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
++ m4_ifval([$4],
++ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
++ lt_dict_add_subkey([lt_decl_dict], [$2],
++ [tagged?], [m4_ifval([$5], [yes], [no])])])
++])
+
+-# _LT_AC_SHELL_INIT(ARG)
+-# ----------------------
+-AC_DEFUN([_LT_AC_SHELL_INIT],
+-[ifdef([AC_DIVERSION_NOTICE],
+- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+- [AC_DIVERT_PUSH(NOTICE)])
+-$1
+-AC_DIVERT_POP
+-])# _LT_AC_SHELL_INIT
+
++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
++# --------------------------------------------------------
++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
++
++
++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_tag_varnames],
++[_lt_decl_filter([tagged?], [yes], $@)])
++
++
++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
++# ---------------------------------------------------------
++m4_define([_lt_decl_filter],
++[m4_case([$#],
++ [0], [m4_fatal([$0: too few arguments: $#])],
++ [1], [m4_fatal([$0: too few arguments: $#: $1])],
++ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
++ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
++ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
++])
+
+-# _LT_AC_PROG_ECHO_BACKSLASH
+-# --------------------------
+-# Add some code to the start of the generated configure script which
+-# will find an echo command which doesn't interpret backslashes.
+-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+-[_LT_AC_SHELL_INIT([
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+
+-case X$ECHO in
+-X*--fallback-echo)
+- # Remove one level of quotation (which was required for Make).
+- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+- ;;
+-esac
++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
++# --------------------------------------------------
++m4_define([lt_decl_quote_varnames],
++[_lt_decl_filter([value], [1], $@)])
++
++
++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_dquote_varnames],
++[_lt_decl_filter([value], [2], $@)])
++
++
++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_varnames_tagged],
++[m4_assert([$# <= 2])dnl
++_$0(m4_quote(m4_default([$1], [[, ]])),
++ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
++ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
++m4_define([_lt_decl_varnames_tagged],
++[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
++
++
++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_all_varnames],
++[_$0(m4_quote(m4_default([$1], [[, ]])),
++ m4_if([$2], [],
++ m4_quote(lt_decl_varnames),
++ m4_quote(m4_shift($@))))[]dnl
++])
++m4_define([_lt_decl_all_varnames],
++[lt_join($@, lt_decl_varnames_tagged([$1],
++ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
++])
+
+-echo=${ECHO-echo}
+-if test "X[$]1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X[$]1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+- # Yippee, $echo works!
+- :
+-else
+- # Restart under the correct shell.
+- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+-fi
+
+-if test "X[$]1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<EOF
+-[$]*
+-EOF
+- exit 0
+-fi
++# _LT_CONFIG_STATUS_DECLARE([VARNAME])
++# ------------------------------------
++# Quote a variable value, and forward it to `config.status' so that its
++# declaration there will have the same value as in `configure'. VARNAME
++# must have a single quote delimited value for this to work.
++m4_define([_LT_CONFIG_STATUS_DECLARE],
++[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+-if test -z "$ECHO"; then
+-if test "X${echo_test_string+set}" != Xset; then
+-# find a string as large as possible, as long as the shell can cope with it
+- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+- echo_test_string=`eval $cmd` &&
+- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+- then
+- break
+- fi
+- done
+-fi
++# _LT_CONFIG_STATUS_DECLARATIONS
++# ------------------------------
++# We delimit libtool config variables with single quotes, so when
++# we write them to config.status, we have to be sure to quote all
++# embedded single quotes properly. In configure, this macro expands
++# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
++#
++# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
++ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- :
+-else
+- # The Solaris, AIX, and Digital Unix default echo programs unquote
+- # backslashes. This makes it impossible to quote backslashes using
+- # echo "$something" | sed 's/\\/\\\\/g'
+- #
+- # So, first we look for a working echo in the user's PATH.
+
+- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+- for dir in $PATH /usr/ucb; do
+- IFS="$lt_save_ifs"
+- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- echo="$dir/echo"
+- break
+- fi
+- done
+- IFS="$lt_save_ifs"
++# _LT_LIBTOOL_TAGS
++# ----------------
++# Output comment and list of tags supported by the script
++m4_defun([_LT_LIBTOOL_TAGS],
++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
++available_tags="_LT_TAGS"dnl
++])
+
+- if test "X$echo" = Xecho; then
+- # We didn't find a better echo, so look for alternatives.
+- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # This shell has a builtin print -r that does the trick.
+- echo='print -r'
+- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+- test "X$CONFIG_SHELL" != X/bin/ksh; then
+- # If we have ksh, try running configure again with it.
+- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+- export ORIGINAL_CONFIG_SHELL
+- CONFIG_SHELL=/bin/ksh
+- export CONFIG_SHELL
+- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+- else
+- # Try using printf.
+- echo='printf %s\n'
+- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # Cool, printf works
+- :
+- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+- export CONFIG_SHELL
+- SHELL="$CONFIG_SHELL"
+- export SHELL
+- echo="$CONFIG_SHELL [$]0 --fallback-echo"
+- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- echo="$CONFIG_SHELL [$]0 --fallback-echo"
+- else
+- # maybe with a smaller string...
+- prev=:
+
+- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+- then
+- break
+- fi
+- prev="$cmd"
+- done
++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
++# -----------------------------------
++# Extract the dictionary values for VARNAME (optionally with TAG) and
++# expand to a commented shell variable setting:
++#
++# # Some comment about what VAR is for.
++# visible_name=$lt_internal_name
++m4_define([_LT_LIBTOOL_DECLARE],
++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
++ [description])))[]dnl
++m4_pushdef([_libtool_name],
++ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
++ [0], [_libtool_name=[$]$1],
++ [1], [_libtool_name=$lt_[]$1],
++ [2], [_libtool_name=$lt_[]$1],
++ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
++])
+
+- if test "$prev" != 'sed 50q "[$]0"'; then
+- echo_test_string=`eval $prev`
+- export echo_test_string
+- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+- else
+- # Oops. We lost completely, so just stick with echo.
+- echo=echo
+- fi
+- fi
+- fi
+- fi
+-fi
+-fi
+
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-ECHO=$echo
+-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+-fi
++# _LT_LIBTOOL_CONFIG_VARS
++# -----------------------
++# Produce commented declarations of non-tagged libtool config variables
++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
++# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
++# section) are produced by _LT_LIBTOOL_TAG_VARS.
++m4_defun([_LT_LIBTOOL_CONFIG_VARS],
++[m4_foreach([_lt_var],
++ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+-AC_SUBST(ECHO)
+-])])# _LT_AC_PROG_ECHO_BACKSLASH
+
++# _LT_LIBTOOL_TAG_VARS(TAG)
++# -------------------------
++m4_define([_LT_LIBTOOL_TAG_VARS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+-# _LT_AC_LOCK
+-# -----------
+-AC_DEFUN([_LT_AC_LOCK],
+-[AC_ARG_ENABLE([libtool-lock],
+- [AC_HELP_STRING([--disable-libtool-lock],
+- [avoid locking (might break parallel builds)])])
+-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+-# Some flags need to be propagated to the compiler or linker for good
+-# libtool support.
+-case $host in
+-ia64-*-hpux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *ELF-32*)
+- HPUX_IA64_MODE="32"
+- ;;
+- *ELF-64*)
+- HPUX_IA64_MODE="64"
+- ;;
+- esac
+- fi
+- rm -rf conftest*
+- ;;
+-*-*-irix6*)
+- # Find out which ABI we are using.
+- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- if test "$lt_cv_prog_gnu_ld" = yes; then
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -melf32bsmip"
+- ;;
+- *N32*)
+- LD="${LD-ld} -melf32bmipn32"
++# _LT_TAGVAR(VARNAME, [TAGNAME])
++# ------------------------------
++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
++
++
++# _LT_CONFIG_COMMANDS
++# -------------------
++# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
++# variables for single and double quote escaping we saved from calls
++# to _LT_DECL, we can put quote escaped variables declarations
++# into `config.status', and then the shell code to quote escape them in
++# for loops in `config.status'. Finally, any additional code accumulated
++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
++m4_defun([_LT_CONFIG_COMMANDS],
++[AC_PROVIDE_IFELSE([LT_OUTPUT],
++ dnl If the libtool generation code has been placed in $CONFIG_LT,
++ dnl instead of duplicating it all over again into config.status,
++ dnl then we will have config.status run $CONFIG_LT later, so it
++ dnl needs to know what name is stored there:
++ [AC_CONFIG_COMMANDS([libtool],
++ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
++ dnl If the libtool generation code is destined for config.status,
++ dnl expand the accumulated commands and init code now:
++ [AC_CONFIG_COMMANDS([libtool],
++ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
++])#_LT_CONFIG_COMMANDS
++
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
++[
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++sed_quote_subst='$sed_quote_subst'
++double_quote_subst='$double_quote_subst'
++delay_variable_subst='$delay_variable_subst'
++_LT_CONFIG_STATUS_DECLARATIONS
++LTCC='$LTCC'
++LTCFLAGS='$LTCFLAGS'
++compiler='$compiler_DEFAULT'
++
++# Quote evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_quote_varnames); do
++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ *[[\\\\\\\`\\"\\\$]]*)
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+- *64-bit*)
+- LD="${LD-ld} -melf64bmip"
++ *)
++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+- else
+- case `/usr/bin/file conftest.$ac_objext` in
+- *32-bit*)
+- LD="${LD-ld} -32"
+- ;;
+- *N32*)
+- LD="${LD-ld} -n32"
++done
++
++# Double-quote double-evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_dquote_varnames); do
++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++ *[[\\\\\\\`\\"\\\$]]*)
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+- *64-bit*)
+- LD="${LD-ld} -64"
++ *)
++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+- fi
+- fi
+- rm -rf conftest*
+- ;;
+-
+-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *32-bit*)
+- case $host in
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_i386"
+- ;;
+- ppc64-*linux*|powerpc64-*linux*)
+- LD="${LD-ld} -m elf32ppclinux"
+- ;;
+- s390x-*linux*)
+- LD="${LD-ld} -m elf_s390"
+- ;;
+- sparc64-*linux*)
+- LD="${LD-ld} -m elf32_sparc"
+- ;;
+- esac
+- ;;
+- *64-bit*)
+- case $host in
+- x86_64-*linux*)
+- LD="${LD-ld} -m elf_x86_64"
+- ;;
+- ppc*-*linux*|powerpc*-*linux*)
+- LD="${LD-ld} -m elf64ppc"
+- ;;
+- s390*-*linux*)
+- LD="${LD-ld} -m elf64_s390"
+- ;;
+- sparc*-*linux*)
+- LD="${LD-ld} -m elf64_sparc"
+- ;;
+- esac
+- ;;
+- esac
+- fi
+- rm -rf conftest*
+- ;;
+-
+-*-*-sco3.2v5*)
+- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+- SAVE_CFLAGS="$CFLAGS"
+- CFLAGS="$CFLAGS -belf"
+- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+- [AC_LANG_PUSH(C)
+- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+- AC_LANG_POP])
+- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+- CFLAGS="$SAVE_CFLAGS"
+- fi
+- ;;
+-sparc*-*solaris*)
+- # Find out which ABI we are using.
+- echo 'int i;' > conftest.$ac_ext
+- if AC_TRY_EVAL(ac_compile); then
+- case `/usr/bin/file conftest.o` in
+- *64-bit*)
+- case $lt_cv_prog_gnu_ld in
+- yes*) LD="${LD-ld} -m elf64_sparc" ;;
+- *) LD="${LD-ld} -64" ;;
+- esac
+- ;;
+- esac
+- fi
+- rm -rf conftest*
+- ;;
++done
+
+-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+- AC_CHECK_TOOL(AS, as, false)
+- AC_CHECK_TOOL(OBJDUMP, objdump, false)
++# Fix-up fallback echo if it was mangled by the above quoting rules.
++case \$lt_ECHO in
++*'\\\[$]0 --fallback-echo"')dnl "
++ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+ ;;
+- ])
+ esac
+
+-need_locks="$enable_libtool_lock"
++_LT_OUTPUT_LIBTOOL_INIT
++])
+
+-])# _LT_AC_LOCK
+
++# LT_OUTPUT
++# ---------
++# This macro allows early generation of the libtool script (before
++# AC_OUTPUT is called), incase it is used in configure for compilation
++# tests.
++AC_DEFUN([LT_OUTPUT],
++[: ${CONFIG_LT=./config.lt}
++AC_MSG_NOTICE([creating $CONFIG_LT])
++cat >"$CONFIG_LT" <<_LTEOF
++#! $SHELL
++# Generated by $as_me.
++# Run this file to recreate a libtool stub with the current configuration.
++
++lt_cl_silent=false
++SHELL=\${CONFIG_SHELL-$SHELL}
++_LTEOF
++
++cat >>"$CONFIG_LT" <<\_LTEOF
++AS_SHELL_SANITIZE
++_AS_PREPARE
+
+-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ----------------------------------------------------------------
+-# Check whether the given compiler option works
+-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+-[AC_REQUIRE([LT_AC_PROG_SED])
+-AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+- printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+- lt_compiler_flag="$3"
+- # Insert the option either (1) after the last *FLAGS variable, or
+- # (2) before a word containing "conftest.", or (3) at the end.
+- # Note that $ac_compile itself does not contain backslashes and begins
+- # with a dollar sign (not a hyphen), so the echo should work correctly.
+- # The option is referenced via a variable to avoid confusing sed.
+- lt_compile=`echo "$ac_compile" | $SED \
+- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+- -e 's:$: $lt_compiler_flag:'`
+- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+- (eval "$lt_compile" 2>conftest.err)
+- ac_status=$?
+- cat conftest.err >&AS_MESSAGE_LOG_FD
+- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+- if (exit $ac_status) && test -s "$ac_outfile"; then
+- # The compiler can only warn and ignore the option if not recognized
+- # So say no if there are warnings other than the usual output.
+- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- fi
+- $rm conftest*
+-])
++exec AS_MESSAGE_FD>&1
++exec AS_MESSAGE_LOG_FD>>config.log
++{
++ echo
++ AS_BOX([Running $as_me.])
++} >&AS_MESSAGE_LOG_FD
++
++lt_cl_help="\
++\`$as_me' creates a local libtool stub from the current configuration,
++for use in further configure time tests before the real libtool is
++generated.
++
++Usage: $[0] [[OPTIONS]]
++
++ -h, --help print this help, then exit
++ -V, --version print version number, then exit
++ -q, --quiet do not print progress messages
++ -d, --debug don't remove temporary files
++
++Report bugs to <bug-libtool@gnu.org>."
++
++lt_cl_version="\
++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
++configured by $[0], generated by m4_PACKAGE_STRING.
++
++Copyright (C) 2008 Free Software Foundation, Inc.
++This config.lt script is free software; the Free Software Foundation
++gives unlimited permision to copy, distribute and modify it."
+
+-if test x"[$]$2" = xyes; then
+- ifelse([$5], , :, [$5])
+-else
+- ifelse([$6], , :, [$6])
+-fi
+-])# AC_LIBTOOL_COMPILER_OPTION
++while test $[#] != 0
++do
++ case $[1] in
++ --version | --v* | -V )
++ echo "$lt_cl_version"; exit 0 ;;
++ --help | --h* | -h )
++ echo "$lt_cl_help"; exit 0 ;;
++ --debug | --d* | -d )
++ debug=: ;;
++ --quiet | --q* | --silent | --s* | -q )
++ lt_cl_silent=: ;;
+
++ -*) AC_MSG_ERROR([unrecognized option: $[1]
++Try \`$[0] --help' for more information.]) ;;
+
+-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+-# [ACTION-SUCCESS], [ACTION-FAILURE])
+-# ------------------------------------------------------------
+-# Check whether the given compiler option works
+-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+-[AC_CACHE_CHECK([$1], [$2],
+- [$2=no
+- save_LDFLAGS="$LDFLAGS"
+- LDFLAGS="$LDFLAGS $3"
+- printf "$lt_simple_link_test_code" > conftest.$ac_ext
+- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+- # The linker can only warn and ignore the option if not recognized
+- # So say no if there are warnings
+- if test -s conftest.err; then
+- # Append any errors to the config.log.
+- cat conftest.err 1>&AS_MESSAGE_LOG_FD
+- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+- if diff conftest.exp conftest.er2 >/dev/null; then
+- $2=yes
+- fi
+- else
+- $2=yes
+- fi
+- fi
+- $rm conftest*
+- LDFLAGS="$save_LDFLAGS"
+-])
++ *) AC_MSG_ERROR([unrecognized argument: $[1]
++Try \`$[0] --help' for more information.]) ;;
++ esac
++ shift
++done
+
+-if test x"[$]$2" = xyes; then
+- ifelse([$4], , :, [$4])
+-else
+- ifelse([$5], , :, [$5])
++if $lt_cl_silent; then
++ exec AS_MESSAGE_FD>/dev/null
+ fi
+-])# AC_LIBTOOL_LINKER_OPTION
++_LTEOF
+
++cat >>"$CONFIG_LT" <<_LTEOF
++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
++_LTEOF
++
++cat >>"$CONFIG_LT" <<\_LTEOF
++AC_MSG_NOTICE([creating $ofile])
++_LT_OUTPUT_LIBTOOL_COMMANDS
++AS_EXIT(0)
++_LTEOF
++chmod +x "$CONFIG_LT"
++
++# configure is writing to config.log, but config.lt does its own redirection,
++# appending to config.log, which fails on DOS, as config.log is still kept
++# open by configure. Here we exec the FD to /dev/null, effectively closing
++# config.log, so it can be properly (re)opened and appended to by config.lt.
++if test "$no_create" != yes; then
++ lt_cl_success=:
++ test "$silent" = yes &&
++ lt_config_lt_args="$lt_config_lt_args --quiet"
++ exec AS_MESSAGE_LOG_FD>/dev/null
++ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
++ exec AS_MESSAGE_LOG_FD>>config.log
++ $lt_cl_success || AS_EXIT(1)
++fi
++])# LT_OUTPUT
+
+-# AC_LIBTOOL_SYS_MAX_CMD_LEN
+-# --------------------------
+-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+-[# find the maximum length of command line arguments
+-AC_MSG_CHECKING([the maximum length of command line arguments])
+-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+- i=0
+- teststring="ABCD"
+
+- case $build_os in
+- msdosdjgpp*)
+- # On DJGPP, this test can blow up pretty badly due to problems in libc
+- # (any single argument exceeding 2000 bytes causes a buffer overrun
+- # during glob expansion). Even if it were fixed, the result of this
+- # check would be larger than it should be.
+- lt_cv_sys_max_cmd_len=12288; # 12K is about right
+- ;;
++# _LT_CONFIG(TAG)
++# ---------------
++# If TAG is the built-in tag, create an initial libtool script with a
++# default configuration from the untagged config vars. Otherwise add code
++# to config.status for appending the configuration named by TAG from the
++# matching tagged config vars.
++m4_defun([_LT_CONFIG],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++_LT_CONFIG_SAVE_COMMANDS([
++ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
++ m4_if(_LT_TAG, [C], [
++ # See if we are running on zsh, and set the options which allow our
++ # commands through without removal of \ escapes.
++ if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++ fi
+
+- gnu*)
+- # Under GNU Hurd, this test is not required because there is
+- # no limit to the length of command line arguments.
+- # Libtool will interpret -1 as no limit whatsoever
+- lt_cv_sys_max_cmd_len=-1;
+- ;;
++ cfgfile="${ofile}T"
++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
++ $RM "$cfgfile"
+
+- cygwin* | mingw*)
+- # On Win9x/ME, this test blows up -- it succeeds, but takes
+- # about 5 minutes as the teststring grows exponentially.
+- # Worse, since 9x/ME are not pre-emptively multitasking,
+- # you end up with a "frozen" computer, even though with patience
+- # the test eventually succeeds (with a max line length of 256k).
+- # Instead, let's just punt: use the minimum linelength reported by
+- # all of the supported platforms: 8192 (on NT/2K/XP).
+- lt_cv_sys_max_cmd_len=8192;
+- ;;
++ cat <<_LT_EOF >> "$cfgfile"
++#! $SHELL
+
+- amigaos*)
+- # On AmigaOS with pdksh, this test takes hours, literally.
+- # So we just punt and use a minimum line length of 8192.
+- lt_cv_sys_max_cmd_len=8192;
+- ;;
++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++_LT_COPYING
++_LT_LIBTOOL_TAGS
+
+- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+- # This has been around since 386BSD, at least. Likely further.
+- if test -x /sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+- elif test -x /usr/sbin/sysctl; then
+- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+- else
+- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+- fi
+- # And add a safety zone
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+- ;;
++# ### BEGIN LIBTOOL CONFIG
++_LT_LIBTOOL_CONFIG_VARS
++_LT_LIBTOOL_TAG_VARS
++# ### END LIBTOOL CONFIG
+
+- interix*)
+- # We know the value 262144 and hardcode it with a safety zone (like BSD)
+- lt_cv_sys_max_cmd_len=196608
+- ;;
++_LT_EOF
+
+- osf*)
+- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+- # nice to cause kernel panics so lets avoid the loop below.
+- # First set a reasonable default.
+- lt_cv_sys_max_cmd_len=16384
+- #
+- if test -x /sbin/sysconfig; then
+- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+- *1*) lt_cv_sys_max_cmd_len=-1 ;;
+- esac
+- fi
+- ;;
+- sco3.2v5*)
+- lt_cv_sys_max_cmd_len=102400
+- ;;
+- sysv5* | sco5v6* | sysv4.2uw2*)
+- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+- if test -n "$kargmax"; then
+- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+- else
+- lt_cv_sys_max_cmd_len=32768
+- fi
+- ;;
+- *)
+- # If test is not a shell built-in, we'll probably end up computing a
+- # maximum length that is only half of the actual maximum length, but
+- # we can't tell.
+- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+- = "XX$teststring") >/dev/null 2>&1 &&
+- new_result=`expr "X$teststring" : ".*" 2>&1` &&
+- lt_cv_sys_max_cmd_len=$new_result &&
+- test $i != 17 # 1/2 MB should be enough
+- do
+- i=`expr $i + 1`
+- teststring=$teststring$teststring
+- done
+- teststring=
+- # Add a significant safety factor because C++ compilers can tack on massive
+- # amounts of additional arguments before passing them to the linker.
+- # It appears as though 1/2 is a usable value.
+- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++ case $host_os in
++ aix3*)
++ cat <<\_LT_EOF >> "$cfgfile"
++# AIX sometimes has problems with the GCC collect2 program. For some
++# reason, if we set the COLLECT_NAMES environment variable, the problems
++# vanish in a puff of smoke.
++if test "X${COLLECT_NAMES+set}" != Xset; then
++ COLLECT_NAMES=
++ export COLLECT_NAMES
++fi
++_LT_EOF
+ ;;
+ esac
+-])
+-if test -n $lt_cv_sys_max_cmd_len ; then
+- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+-else
+- AC_MSG_RESULT(none)
+-fi
+-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
++
++ _LT_PROG_LTMAIN
++
++ # We use sed instead of cat because bash on DJGPP gets confused if
++ # if finds mixed CR/LF and LF-only lines. Since sed operates in
++ # text mode, it properly converts lines to CR/LF. This bash problem
++ # is reportedly fixed, but why not run on old versions too?
++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
++
++ _LT_PROG_XSI_SHELLFNS
++
++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
++
++ mv -f "$cfgfile" "$ofile" ||
++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
++ chmod +x "$ofile"
++],
++[cat <<_LT_EOF >> "$ofile"
++
++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
++dnl in a comment (ie after a #).
++# ### BEGIN LIBTOOL TAG CONFIG: $1
++_LT_LIBTOOL_TAG_VARS(_LT_TAG)
++# ### END LIBTOOL TAG CONFIG: $1
++_LT_EOF
++])dnl /m4_if
++],
++[m4_if([$1], [], [
++ PACKAGE='$PACKAGE'
++ VERSION='$VERSION'
++ TIMESTAMP='$TIMESTAMP'
++ RM='$RM'
++ ofile='$ofile'], [])
++])dnl /_LT_CONFIG_SAVE_COMMANDS
++])# _LT_CONFIG
+
+
+-# _LT_AC_CHECK_DLFCN
++# LT_SUPPORTED_TAG(TAG)
++# ---------------------
++# Trace this macro to discover what tags are supported by the libtool
++# --tag option, using:
++# autoconf --trace 'LT_SUPPORTED_TAG:$1'
++AC_DEFUN([LT_SUPPORTED_TAG], [])
++
++
++# C support is built-in for now
++m4_define([_LT_LANG_C_enabled], [])
++m4_define([_LT_TAGS], [])
++
++
++# LT_LANG(LANG)
++# -------------
++# Enable libtool support for the given language if not already enabled.
++AC_DEFUN([LT_LANG],
++[AC_BEFORE([$0], [LT_OUTPUT])dnl
++m4_case([$1],
++ [C], [_LT_LANG(C)],
++ [C++], [_LT_LANG(CXX)],
++ [Java], [_LT_LANG(GCJ)],
++ [Fortran 77], [_LT_LANG(F77)],
++ [Fortran], [_LT_LANG(FC)],
++ [Windows Resource], [_LT_LANG(RC)],
++ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
++ [_LT_LANG($1)],
++ [m4_fatal([$0: unsupported language: "$1"])])])dnl
++])# LT_LANG
++
++
++# _LT_LANG(LANGNAME)
+ # ------------------
+-AC_DEFUN([_LT_AC_CHECK_DLFCN],
+-[AC_CHECK_HEADERS(dlfcn.h)dnl
+-])# _LT_AC_CHECK_DLFCN
++m4_defun([_LT_LANG],
++[m4_ifdef([_LT_LANG_]$1[_enabled], [],
++ [LT_SUPPORTED_TAG([$1])dnl
++ m4_append([_LT_TAGS], [$1 ])dnl
++ m4_define([_LT_LANG_]$1[_enabled], [])dnl
++ _LT_LANG_$1_CONFIG($1)])dnl
++])# _LT_LANG
+
+
+-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+-# ---------------------------------------------------------------------
+-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+-if test "$cross_compiling" = yes; then :
+- [$4]
+-else
+- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+- lt_status=$lt_dlunknown
+- cat > conftest.$ac_ext <<EOF
+-[#line __oline__ "configure"
+-#include "confdefs.h"
++# _LT_LANG_DEFAULT_CONFIG
++# -----------------------
++m4_defun([_LT_LANG_DEFAULT_CONFIG],
++[AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [LT_LANG(CXX)],
++ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
++
++AC_PROVIDE_IFELSE([AC_PROG_F77],
++ [LT_LANG(F77)],
++ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
++
++AC_PROVIDE_IFELSE([AC_PROG_FC],
++ [LT_LANG(FC)],
++ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
++
++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
++dnl pulling things in needlessly.
++AC_PROVIDE_IFELSE([AC_PROG_GCJ],
++ [LT_LANG(GCJ)],
++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
++ [LT_LANG(GCJ)],
++ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
++ [LT_LANG(GCJ)],
++ [m4_ifdef([AC_PROG_GCJ],
++ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
++ m4_ifdef([A][M_PROG_GCJ],
++ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
++ m4_ifdef([LT_PROG_GCJ],
++ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
++
++AC_PROVIDE_IFELSE([LT_PROG_RC],
++ [LT_LANG(RC)],
++ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
++])# _LT_LANG_DEFAULT_CONFIG
++
++# Obsolete macros:
++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
++dnl AC_DEFUN([AC_LIBTOOL_F77], [])
++dnl AC_DEFUN([AC_LIBTOOL_FC], [])
++dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+-#if HAVE_DLFCN_H
+-#include <dlfcn.h>
+-#endif
+
+-#include <stdio.h>
++# _LT_TAG_COMPILER
++# ----------------
++m4_defun([_LT_TAG_COMPILER],
++[AC_REQUIRE([AC_PROG_CC])dnl
+
+-#ifdef RTLD_GLOBAL
+-# define LT_DLGLOBAL RTLD_GLOBAL
+-#else
+-# ifdef DL_GLOBAL
+-# define LT_DLGLOBAL DL_GLOBAL
+-# else
+-# define LT_DLGLOBAL 0
+-# endif
+-#endif
++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+- find out it does not work in some platform. */
+-#ifndef LT_DLLAZY_OR_NOW
+-# ifdef RTLD_LAZY
+-# define LT_DLLAZY_OR_NOW RTLD_LAZY
+-# else
+-# ifdef DL_LAZY
+-# define LT_DLLAZY_OR_NOW DL_LAZY
+-# else
+-# ifdef RTLD_NOW
+-# define LT_DLLAZY_OR_NOW RTLD_NOW
+-# else
+-# ifdef DL_NOW
+-# define LT_DLLAZY_OR_NOW DL_NOW
+-# else
+-# define LT_DLLAZY_OR_NOW 0
+-# endif
+-# endif
+-# endif
+-# endif
+-#endif
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
+
+-#ifdef __cplusplus
+-extern "C" void exit (int);
+-#endif
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+-void fnord() { int i=42;}
+-int main ()
+-{
+- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+- int status = $lt_dlunknown;
++# Allow CC to be a program name with arguments.
++compiler=$CC
++])# _LT_TAG_COMPILER
+
+- if (self)
+- {
+- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+- /* dlclose (self); */
+- }
+- else
+- puts (dlerror ());
+
+- exit (status);
+-}]
+-EOF
+- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+- lt_status=$?
+- case x$lt_status in
+- x$lt_dlno_uscore) $1 ;;
+- x$lt_dlneed_uscore) $2 ;;
+- x$lt_dlunknown|x*) $3 ;;
+- esac
+- else :
+- # compilation failed
+- $3
+- fi
+-fi
+-rm -fr conftest*
+-])# _LT_AC_TRY_DLOPEN_SELF
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++m4_defun([_LT_COMPILER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$RM conftest*
++])# _LT_COMPILER_BOILERPLATE
+
+
+-# AC_LIBTOOL_DLOPEN_SELF
++# _LT_LINKER_BOILERPLATE
+ # ----------------------
+-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+-if test "x$enable_dlopen" != xyes; then
+- enable_dlopen=unknown
+- enable_dlopen_self=unknown
+- enable_dlopen_self_static=unknown
+-else
+- lt_cv_dlopen=no
+- lt_cv_dlopen_libs=
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++m4_defun([_LT_LINKER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$RM -r conftest*
++])# _LT_LINKER_BOILERPLATE
+
++# _LT_REQUIRED_DARWIN_CHECKS
++# -------------------------
++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+- beos*)
+- lt_cv_dlopen="load_add_on"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
+- ;;
+-
+- mingw* | pw32*)
+- lt_cv_dlopen="LoadLibrary"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- cygwin*)
+- lt_cv_dlopen="dlopen"
+- lt_cv_dlopen_libs=
+- ;;
+-
+- darwin*)
+- # if libdl is installed we need to link against it
+- AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+- lt_cv_dlopen="dyld"
+- lt_cv_dlopen_libs=
+- lt_cv_dlopen_self=yes
++ rhapsody* | darwin*)
++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
++ AC_CHECK_TOOL([LIPO], [lipo], [:])
++ AC_CHECK_TOOL([OTOOL], [otool], [:])
++ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
++ _LT_DECL([], [DSYMUTIL], [1],
++ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
++ _LT_DECL([], [NMEDIT], [1],
++ [Tool to change global to local symbols on Mac OS X])
++ _LT_DECL([], [LIPO], [1],
++ [Tool to manipulate fat objects and archives on Mac OS X])
++ _LT_DECL([], [OTOOL], [1],
++ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
++ _LT_DECL([], [OTOOL64], [1],
++ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
++
++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
++ [lt_cv_apple_cc_single_mod=no
++ if test -z "${LT_MULTI_MODULE}"; then
++ # By default we will add the -single_module flag. You can override
++ # by either setting the environment variable LT_MULTI_MODULE
++ # non-empty at configure time, or by adding -multi_module to the
++ # link flags.
++ rm -rf libconftest.dylib*
++ echo "int foo(void){return 1;}" > conftest.c
++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
++ _lt_result=$?
++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
++ lt_cv_apple_cc_single_mod=yes
++ else
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ fi
++ rm -rf libconftest.dylib*
++ rm -f conftest.*
++ fi])
++ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
++ [lt_cv_ld_exported_symbols_list],
++ [lt_cv_ld_exported_symbols_list=no
++ save_LDFLAGS=$LDFLAGS
++ echo "_main" > conftest.sym
++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++ [lt_cv_ld_exported_symbols_list=yes],
++ [lt_cv_ld_exported_symbols_list=no])
++ LDFLAGS="$save_LDFLAGS"
+ ])
+- ;;
+-
+- *)
+- AC_CHECK_FUNC([shl_load],
+- [lt_cv_dlopen="shl_load"],
+- [AC_CHECK_LIB([dld], [shl_load],
+- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+- [AC_CHECK_FUNC([dlopen],
+- [lt_cv_dlopen="dlopen"],
+- [AC_CHECK_LIB([dl], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+- [AC_CHECK_LIB([svld], [dlopen],
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+- [AC_CHECK_LIB([dld], [dld_link],
+- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+- ])
+- ])
+- ])
+- ])
+- ])
++ case $host_os in
++ rhapsody* | darwin1.[[012]])
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
++ darwin1.*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ darwin*) # darwin 5.x on
++ # if running on 10.5 or later, the deployment target defaults
++ # to the OS version, if on x86, and 10.4, the deployment
++ # target defaults to 10.4. Don't you love it?
++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ 10.[[012]]*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ 10.*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ esac
++ ;;
++ esac
++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
++ _lt_dar_single_mod='$single_module'
++ fi
++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
++ else
++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ fi
++ if test "$DSYMUTIL" != ":"; then
++ _lt_dsymutil='~$DSYMUTIL $lib || :'
++ else
++ _lt_dsymutil=
++ fi
+ ;;
+ esac
++])
+
+- if test "x$lt_cv_dlopen" != xno; then
+- enable_dlopen=yes
++
++# _LT_DARWIN_LINKER_FEATURES
++# --------------------------
++# Checks for linker and compiler features on darwin
++m4_defun([_LT_DARWIN_LINKER_FEATURES],
++[
++ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_automatic, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
++ case $cc_basename in
++ ifort*) _lt_dar_can_shared=yes ;;
++ *) _lt_dar_can_shared=$GCC ;;
++ esac
++ if test "$_lt_dar_can_shared" = "yes"; then
++ output_verbose_link_cmd=echo
++ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
++ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
++ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
++ m4_if([$1], [CXX],
++[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
++ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_na