From 047d8328a9596a3f63c259437c089454c4efa188 Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Wed, 21 Sep 2016 17:40:38 +0200 Subject: gdb-microbaze: split off big patch, so update-patches works --- package/gdb-microblaze/patches/microblaze.patch | 1848 -------------------- package/gdb-microblaze/patches/patch-bfd_bfd-in2_h | 14 + .../patches/patch-bfd_elf32-microblaze_c | 202 +++ package/gdb-microblaze/patches/patch-bfd_libbfd_h | 10 + .../gdb-microblaze/patches/patch-gdb_Makefile_in | 20 + .../patches/patch-gdb_common_linux-ptrace_h | 6 +- .../patches/patch-gdb_common_signals_c | 6 +- .../patches/patch-gdb_config_microblaze_linux_mh | 13 + .../patches/patch-gdb_configure_host | 19 + .../gdb-microblaze/patches/patch-gdb_configure_tgt | 14 + .../gdb-microblaze/patches/patch-gdb_debugreg_h | 51 + .../patches/patch-gdb_gdbserver_Makefile_in | 27 + .../patches/patch-gdb_gdbserver_configure | 8 +- .../patches/patch-gdb_gdbserver_configure_srv | 16 + .../patch-gdb_gdbserver_linux-microblaze-low_c | 232 +++ .../gdb-microblaze/patches/patch-gdb_linux-nat_c | 8 +- .../patches/patch-gdb_microblaze-linux-nat_c | 433 +++++ .../patches/patch-gdb_microblaze-linux-tdep_c | 155 ++ .../patches/patch-gdb_microblaze-rom_c | 18 + .../patches/patch-gdb_microblaze-tdep_c | 467 +++++ .../patches/patch-gdb_microblaze-tdep_h | 91 + .../patch-gdb_regformats_reg-microblaze_dat | 44 + package/gdb-microblaze/patches/patch-gdb_sgidefs_h | 33 + .../patches/patch-include_elf_microblaze_h | 10 + .../patches/patch-opcodes_microblaze-opc_h | 29 + .../patches/patch-opcodes_microblaze-opcm_h | 15 + 26 files changed, 1927 insertions(+), 1862 deletions(-) delete mode 100644 package/gdb-microblaze/patches/microblaze.patch create mode 100644 package/gdb-microblaze/patches/patch-bfd_bfd-in2_h create mode 100644 package/gdb-microblaze/patches/patch-bfd_elf32-microblaze_c create mode 100644 package/gdb-microblaze/patches/patch-bfd_libbfd_h create mode 100644 package/gdb-microblaze/patches/patch-gdb_Makefile_in create mode 100644 package/gdb-microblaze/patches/patch-gdb_config_microblaze_linux_mh create mode 100644 package/gdb-microblaze/patches/patch-gdb_configure_host create mode 100644 package/gdb-microblaze/patches/patch-gdb_configure_tgt create mode 100644 package/gdb-microblaze/patches/patch-gdb_debugreg_h create mode 100644 package/gdb-microblaze/patches/patch-gdb_gdbserver_Makefile_in create mode 100644 package/gdb-microblaze/patches/patch-gdb_gdbserver_configure_srv create mode 100644 package/gdb-microblaze/patches/patch-gdb_gdbserver_linux-microblaze-low_c create mode 100644 package/gdb-microblaze/patches/patch-gdb_microblaze-linux-nat_c create mode 100644 package/gdb-microblaze/patches/patch-gdb_microblaze-linux-tdep_c create mode 100644 package/gdb-microblaze/patches/patch-gdb_microblaze-rom_c create mode 100644 package/gdb-microblaze/patches/patch-gdb_microblaze-tdep_c create mode 100644 package/gdb-microblaze/patches/patch-gdb_microblaze-tdep_h create mode 100644 package/gdb-microblaze/patches/patch-gdb_regformats_reg-microblaze_dat create mode 100644 package/gdb-microblaze/patches/patch-gdb_sgidefs_h create mode 100644 package/gdb-microblaze/patches/patch-include_elf_microblaze_h create mode 100644 package/gdb-microblaze/patches/patch-opcodes_microblaze-opc_h create mode 100644 package/gdb-microblaze/patches/patch-opcodes_microblaze-opcm_h (limited to 'package/gdb-microblaze') diff --git a/package/gdb-microblaze/patches/microblaze.patch b/package/gdb-microblaze/patches/microblaze.patch deleted file mode 100644 index 867cbf554..000000000 --- a/package/gdb-microblaze/patches/microblaze.patch +++ /dev/null @@ -1,1848 +0,0 @@ -diff -Nur gdb-7.8.2.orig/bfd/bfd-in2.h gdb-7.8.2/bfd/bfd-in2.h ---- gdb-7.8.2.orig/bfd/bfd-in2.h 2015-01-15 11:58:11.000000000 +0100 -+++ gdb-7.8.2/bfd/bfd-in2.h 2016-05-14 21:29:38.989383220 +0200 -@@ -5449,6 +5449,11 @@ - expressions of the form "Symbol Op Symbol" */ - BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM, - -+/* This is a 32 bit reloc that stores the 32 bit pc relative -+value in two words (with an imm instruction). No relocation is -+done here - only used for relaxing */ -+ BFD_RELOC_MICROBLAZE_32_NONE, -+ - /* This is a 64 bit reloc that stores the 32 bit pc relative - value in two words (with an imm instruction). No relocation is - done here - only used for relaxing */ -diff -Nur gdb-7.8.2.orig/bfd/elf32-microblaze.c gdb-7.8.2/bfd/elf32-microblaze.c ---- gdb-7.8.2.orig/bfd/elf32-microblaze.c 2015-01-15 11:58:11.000000000 +0100 -+++ gdb-7.8.2/bfd/elf32-microblaze.c 2016-05-14 21:29:38.993383375 +0200 -@@ -177,6 +177,20 @@ - FALSE), /* PC relative offset? */ - - /* This reloc does nothing. Used for relaxation. */ -+ HOWTO (R_MICROBLAZE_32_NONE, /* Type. */ -+ 0, /* Rightshift. */ -+ 2, /* Size (0 = byte, 1 = short, 2 = long). */ -+ 32, /* Bitsize. */ -+ TRUE, /* PC_relative. */ -+ 0, /* Bitpos. */ -+ complain_overflow_bitfield, /* Complain on overflow. */ -+ NULL, /* Special Function. */ -+ "R_MICROBLAZE_32_NONE",/* Name. */ -+ FALSE, /* Partial Inplace. */ -+ 0, /* Source Mask. */ -+ 0, /* Dest Mask. */ -+ FALSE), /* PC relative offset? */ -+ - HOWTO (R_MICROBLAZE_64_NONE, /* Type. */ - 0, /* Rightshift. */ - 2, /* Size (0 = byte, 1 = short, 2 = long). */ -@@ -532,7 +546,10 @@ - case BFD_RELOC_NONE: - microblaze_reloc = R_MICROBLAZE_NONE; - break; -- case BFD_RELOC_MICROBLAZE_64_NONE: -+ case BFD_RELOC_MICROBLAZE_32_NONE: -+ microblaze_reloc = R_MICROBLAZE_32_NONE; -+ break; -+ case BFD_RELOC_MICROBLAZE_64_NONE: - microblaze_reloc = R_MICROBLAZE_64_NONE; - break; - case BFD_RELOC_32: -@@ -668,6 +685,67 @@ - return _bfd_elf_is_local_label_name (abfd, name); - } - -+/* Support for core dump NOTE sections. */ -+static bfd_boolean -+microblaze_elf_grok_prstatus (bfd *abfd, Elf_Internal_Note *note) -+{ -+ int offset; -+ unsigned int size; -+ -+ switch (note->descsz) -+ { -+ default: -+ return FALSE; -+ -+ case 228: /* Linux/MicroBlaze */ -+ /* pr_cursig */ -+ elf_tdata (abfd)->core->signal = bfd_get_16 (abfd, note->descdata + 12); -+ -+ /* pr_pid */ -+ elf_tdata (abfd)->core->pid = bfd_get_32 (abfd, note->descdata + 24); -+ -+ /* pr_reg */ -+ offset = 72; -+ size = 50 * 4; -+ -+ break; -+ } -+ -+ /* Make a ".reg/999" section. */ -+ return _bfd_elfcore_make_pseudosection (abfd, ".reg", -+ size, note->descpos + offset); -+} -+ -+static bfd_boolean -+microblaze_elf_grok_psinfo (bfd *abfd, Elf_Internal_Note *note) -+{ -+ switch (note->descsz) -+ { -+ default: -+ return FALSE; -+ -+ case 128: /* Linux/MicroBlaze elf_prpsinfo */ -+ elf_tdata (abfd)->core->program -+ = _bfd_elfcore_strndup (abfd, note->descdata + 32, 16); -+ elf_tdata (abfd)->core->command -+ = _bfd_elfcore_strndup (abfd, note->descdata + 48, 80); -+ } -+ -+ /* Note that for some reason, a spurious space is tacked -+ onto the end of the args in some (at least one anyway) -+ implementations, so strip it off if it exists. */ -+ -+ { -+ char *command = elf_tdata (abfd)->core->command; -+ int n = strlen (command); -+ -+ if (0 < n && command[n - 1] == ' ') -+ command[n - 1] = '\0'; -+ } -+ -+ return TRUE; -+} -+ - /* The microblaze linker (like many others) needs to keep track of - the number of relocs that it decides to copy as dynamic relocs in - check_relocs for each symbol. This is so that it can later discard -@@ -1023,7 +1101,7 @@ - { - /* External symbol. */ - bfd_boolean warned ATTRIBUTE_UNUSED; -- bfd_boolean ignored ATTRIBUTE_UNUSED; -+ bfd_boolean ignored; - - RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel, - r_symndx, symtab_hdr, sym_hashes, -@@ -1852,14 +1930,22 @@ - } - break; - case R_MICROBLAZE_NONE: -+ case R_MICROBLAZE_32_NONE: - { - /* This was a PC-relative instruction that was - completely resolved. */ - int sfix, efix; -+ unsigned int val; - bfd_vma target_address; - target_address = irel->r_addend + irel->r_offset; - sfix = calc_fixup (irel->r_offset, 0, sec); - efix = calc_fixup (target_address, 0, sec); -+ -+ /* Validate the in-band val. */ -+ val = bfd_get_32 (abfd, contents + irel->r_offset); -+ if (val != irel->r_addend && ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) { -+ fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend); -+ } - irel->r_addend -= (efix - sfix); - /* Should use HOWTO. */ - microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset, -@@ -1907,6 +1993,49 @@ - irelscanend = irelocs + o->reloc_count; - for (irelscan = irelocs; irelscan < irelscanend; irelscan++) - { -+ if (1 && ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE) -+ { -+ unsigned int val; -+ -+ isym = isymbuf + ELF32_R_SYM (irelscan->r_info); -+ -+ /* hax: We only do the following fixup for debug location lists. */ -+ if (strcmp(".debug_loc", o->name)) -+ continue; -+ -+ /* This was a PC-relative instruction that was completely resolved. */ -+ if (ocontents == NULL) -+ { -+ if (elf_section_data (o)->this_hdr.contents != NULL) -+ ocontents = elf_section_data (o)->this_hdr.contents; -+ else -+ { -+ /* We always cache the section contents. -+ Perhaps, if info->keep_memory is FALSE, we -+ should free them, if we are permitted to. */ -+ -+ if (o->rawsize == 0) -+ o->rawsize = o->size; -+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); -+ if (ocontents == NULL) -+ goto error_return; -+ if (!bfd_get_section_contents (abfd, o, ocontents, -+ (file_ptr) 0, -+ o->rawsize)) -+ goto error_return; -+ elf_section_data (o)->this_hdr.contents = ocontents; -+ } -+ } -+ -+ val = bfd_get_32 (abfd, ocontents + irelscan->r_offset); -+ if (val != irelscan->r_addend) { -+ fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, irelscan->r_addend); -+ } -+ -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec); -+ microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, -+ irelscan->r_addend); -+ } - if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32) - { - isym = isymbuf + ELF32_R_SYM (irelscan->r_info); -@@ -1966,7 +2095,7 @@ - elf_section_data (o)->this_hdr.contents = ocontents; - } - } -- irelscan->r_addend -= calc_fixup (irel->r_addend -+ irelscan->r_addend -= calc_fixup (irelscan->r_addend - + isym->st_value, - 0, - sec); -@@ -3506,4 +3635,7 @@ - #define elf_backend_size_dynamic_sections microblaze_elf_size_dynamic_sections - #define elf_backend_add_symbol_hook microblaze_elf_add_symbol_hook - -+#define elf_backend_grok_prstatus microblaze_elf_grok_prstatus -+#define elf_backend_grok_psinfo microblaze_elf_grok_psinfo -+ - #include "elf32-target.h" -diff -Nur gdb-7.8.2.orig/bfd/libbfd.h gdb-7.8.2/bfd/libbfd.h ---- gdb-7.8.2.orig/bfd/libbfd.h 2015-01-15 11:58:11.000000000 +0100 -+++ gdb-7.8.2/bfd/libbfd.h 2016-05-14 21:29:38.993383375 +0200 -@@ -2644,6 +2644,7 @@ - "BFD_RELOC_MICROBLAZE_32_ROSDA", - "BFD_RELOC_MICROBLAZE_32_RWSDA", - "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM", -+ "BFD_RELOC_MICROBLAZE_32_NONE", - "BFD_RELOC_MICROBLAZE_64_NONE", - "BFD_RELOC_MICROBLAZE_64_GOTPC", - "BFD_RELOC_MICROBLAZE_64_GOT", -diff -Nur gdb-7.8.2.orig/gdb/config/microblaze/linux.mh gdb-7.8.2/gdb/config/microblaze/linux.mh ---- gdb-7.8.2.orig/gdb/config/microblaze/linux.mh 1970-01-01 01:00:00.000000000 +0100 -+++ gdb-7.8.2/gdb/config/microblaze/linux.mh 2016-05-14 21:29:38.993383375 +0200 -@@ -0,0 +1,10 @@ -+# Host: Microblaze, running Linux -+ -+NAT_FILE= config/nm-linux.h -+NATDEPFILES= inf-ptrace.o fork-child.o \ -+ microblaze-linux-nat.o proc-service.o linux-thread-db.o \ -+ linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \ -+ linux-waitpid.o -+NAT_CDEPS = $(srcdir)/proc-service.list -+ -+LOADLIBES = -ldl $(RDYNAMIC) -diff -Nur gdb-7.8.2.orig/gdb/configure.host gdb-7.8.2/gdb/configure.host ---- gdb-7.8.2.orig/gdb/configure.host 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/gdb/configure.host 2016-05-14 21:29:38.993383375 +0200 -@@ -59,6 +59,7 @@ - m68*) gdb_host_cpu=m68k ;; - m88*) gdb_host_cpu=m88k ;; - mips*) gdb_host_cpu=mips ;; -+microblaze*) gdb_host_cpu=microblaze ;; - powerpc* | rs6000) gdb_host_cpu=powerpc ;; - sparcv9 | sparc64) gdb_host_cpu=sparc ;; - s390*) gdb_host_cpu=s390 ;; -@@ -133,6 +134,8 @@ - gdb_host=nbsd ;; - mips64*-*-openbsd*) gdb_host=obsd64 ;; - -+microblaze*-*linux*) gdb_host=linux ;; -+ - powerpc-*-aix* | rs6000-*-* | powerpc64-*-aix*) - gdb_host=aix ;; - powerpc*-*-freebsd*) gdb_host=fbsd ;; -diff -Nur gdb-7.8.2.orig/gdb/configure.tgt gdb-7.8.2/gdb/configure.tgt ---- gdb-7.8.2.orig/gdb/configure.tgt 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/gdb/configure.tgt 2016-05-14 21:29:38.993383375 +0200 -@@ -340,9 +340,10 @@ - - microblaze*-linux-*|microblaze*-*-linux*) - # Target: Xilinx MicroBlaze running Linux -- gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o microblaze-rom.o \ -+ gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o microblaze-rom.o glibc-tdep.o \ - monitor.o dsrec.o solib-svr4.o symfile-mem.o linux-tdep.o" - gdb_sim=../sim/microblaze/libsim.a -+ build_gdbserver=yes - ;; - microblaze*-*-*) - # Target: Xilinx MicroBlaze running standalone -diff -Nur gdb-7.8.2.orig/gdb/gdbserver/configure.srv gdb-7.8.2/gdb/gdbserver/configure.srv ---- gdb-7.8.2.orig/gdb/gdbserver/configure.srv 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/gdb/gdbserver/configure.srv 2016-05-14 21:29:38.993383375 +0200 -@@ -198,6 +198,13 @@ - srv_linux_usrregs=yes - srv_linux_thread_db=yes - ;; -+ microblaze*-*-linux*) srv_regobj=microblaze-linux.o -+ srv_tgtobj="$srv_linux_obj linux-microblaze-low.o" -+ srv_linux_usrregs=yes -+ srv_linux_regsets=yes -+ srv_linux_thread_db=yes -+ ;; -+ - nios2*-*-linux*) srv_regobj="nios2-linux.o" - srv_tgtobj="$srv_linux_obj linux-nios2-low.o" - srv_xmlfiles="nios2-linux.xml" -diff -Nur gdb-7.8.2.orig/gdb/gdbserver/linux-microblaze-low.c gdb-7.8.2/gdb/gdbserver/linux-microblaze-low.c ---- gdb-7.8.2.orig/gdb/gdbserver/linux-microblaze-low.c 1970-01-01 01:00:00.000000000 +0100 -+++ gdb-7.8.2/gdb/gdbserver/linux-microblaze-low.c 2016-05-14 21:29:38.993383375 +0200 -@@ -0,0 +1,228 @@ -+/* GNU/Linux/Microblaze specific low level interface, for the remote server for -+ GDB. -+ Copyright (C) 1995-2013 Free Software Foundation, Inc. -+ -+ This file is part of GDB. -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 3 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program. If not, see . */ -+ -+#include "server.h" -+#include "linux-low.h" -+ -+#include -+#include -+#include -+ -+#include "gdb_proc_service.h" -+ -+static int microblaze_regmap[] = -+ {PT_GPR(0), PT_GPR(1), PT_GPR(2), PT_GPR(3), -+ PT_GPR(4), PT_GPR(5), PT_GPR(6), PT_GPR(7), -+ PT_GPR(8), PT_GPR(9), PT_GPR(10), PT_GPR(11), -+ PT_GPR(12), PT_GPR(13), PT_GPR(14), PT_GPR(15), -+ PT_GPR(16), PT_GPR(17), PT_GPR(18), PT_GPR(19), -+ PT_GPR(20), PT_GPR(21), PT_GPR(22), PT_GPR(23), -+ PT_GPR(24), PT_GPR(25), PT_GPR(26), PT_GPR(27), -+ PT_GPR(28), PT_GPR(29), PT_GPR(30), PT_GPR(31), -+ PT_PC, PT_MSR, PT_EAR, PT_ESR, -+ PT_FSR -+ }; -+ -+#define microblaze_num_regs (sizeof microblaze_regmap / sizeof microblaze_regmap[0]) -+ -+/* Defined in auto-generated file microblaze-linux.c. */ -+void init_registers_microblaze (void); -+extern const struct target_desc *tdesc_microblaze; -+ -+static int -+microblaze_cannot_store_register (int regno) -+{ -+ if (microblaze_regmap[regno] == -1 || regno == 0) -+ return 1; -+ -+ return 0; -+} -+ -+static int -+microblaze_cannot_fetch_register (int regno) -+{ -+ return 0; -+} -+ -+static CORE_ADDR -+microblaze_get_pc (struct regcache *regcache) -+{ -+ unsigned long pc; -+ -+ collect_register_by_name (regcache, "pc", &pc); -+ return (CORE_ADDR) pc; -+} -+ -+static void -+microblaze_set_pc (struct regcache *regcache, CORE_ADDR pc) -+{ -+ unsigned long newpc = pc; -+ -+ supply_register_by_name (regcache, "pc", &newpc); -+} -+ -+/* dbtrap insn */ -+/* brki r16, 0x18; */ -+static const unsigned long microblaze_breakpoint = 0xba0c0018; -+#define microblaze_breakpoint_len 4 -+ -+static int -+microblaze_breakpoint_at (CORE_ADDR where) -+{ -+ unsigned long insn; -+ -+ (*the_target->read_memory) (where, (unsigned char *) &insn, 4); -+ if (insn == microblaze_breakpoint) -+ return 1; -+ /* If necessary, recognize more trap instructions here. GDB only uses the -+ one. */ -+ return 0; -+} -+ -+static CORE_ADDR -+microblaze_reinsert_addr (struct regcache *regcache) -+{ -+ unsigned long pc; -+ collect_register_by_name (regcache, "r15", &pc); -+ return pc; -+} -+ -+#ifdef HAVE_PTRACE_GETREGS -+ -+static void -+microblaze_collect_ptrace_register (struct regcache *regcache, int regno, char *buf) -+{ -+ int size = register_size (regcache->tdesc, regno); -+ -+ memset (buf, 0, sizeof (long)); -+ -+ if (size < sizeof (long)) -+ collect_register (regcache, regno, buf + sizeof (long) - size); -+ else -+ collect_register (regcache, regno, buf); -+} -+ -+static void -+microblaze_supply_ptrace_register (struct regcache *regcache, -+ int regno, const char *buf) -+{ -+ int size = register_size (regcache->tdesc, regno); -+ -+ if (regno == 0) { -+ unsigned long regbuf_0 = 0; -+ /* clobbering r0 so that it is always 0 as enforced by hardware */ -+ supply_register (regcache, regno, (const char*)®buf_0); -+ } else { -+ if (size < sizeof (long)) -+ supply_register (regcache, regno, buf + sizeof (long) - size); -+ else -+ supply_register (regcache, regno, buf); -+ } -+} -+ -+/* Provide only a fill function for the general register set. ps_lgetregs -+ will use this for NPTL support. */ -+ -+static void microblaze_fill_gregset (struct regcache *regcache, void *buf) -+{ -+ int i; -+ -+ for (i = 0; i < 32; i++) -+ microblaze_collect_ptrace_register (regcache, i, (char *) buf + microblaze_regmap[i]); -+} -+ -+static void -+microblaze_store_gregset (struct regcache *regcache, const void *buf) -+{ -+ int i; -+ -+ for (i = 0; i < 32; i++) -+ supply_register (regcache, i, (char *) buf + microblaze_regmap[i]); -+} -+ -+#endif /* HAVE_PTRACE_GETREGS */ -+ -+static struct regset_info microblaze_regsets[] = { -+#ifdef HAVE_PTRACE_GETREGS -+ { PTRACE_GETREGS, PTRACE_SETREGS, 0, sizeof (elf_gregset_t), GENERAL_REGS, microblaze_fill_gregset, microblaze_store_gregset }, -+ { 0, 0, 0, -1, -1, NULL, NULL }, -+#endif /* HAVE_PTRACE_GETREGS */ -+ { 0, 0, 0, -1, -1, NULL, NULL } -+}; -+ -+static struct regsets_info microblaze_regsets_info = -+ { -+ microblaze_regsets, /* regsets */ -+ 0, /* num_regsets */ -+ NULL, /* disabled_regsets */ -+ }; -+ -+static struct usrregs_info microblaze_usrregs_info = -+ { -+ microblaze_num_regs, -+ microblaze_regmap, -+ }; -+ -+static struct regs_info regs_info = -+ { -+ NULL, /* regset_bitmap */ -+ µblaze_usrregs_info, -+ µblaze_regsets_info -+ }; -+ -+static const struct regs_info * -+microblaze_regs_info (void) -+{ -+ return ®s_info; -+} -+ -+static void -+microblaze_arch_setup (void) -+{ -+ current_process ()->tdesc = tdesc_microblaze; -+} -+ -+struct linux_target_ops the_low_target = { -+ microblaze_arch_setup, -+ microblaze_regs_info, -+ microblaze_cannot_fetch_register, -+ microblaze_cannot_store_register, -+ NULL, /* fetch_register */ -+ microblaze_get_pc, -+ microblaze_set_pc, -+ (const unsigned char *) µblaze_breakpoint, -+ microblaze_breakpoint_len, -+ microblaze_reinsert_addr, -+ 0, -+ microblaze_breakpoint_at, -+ NULL, -+ NULL, -+ NULL, -+ NULL, -+ microblaze_collect_ptrace_register, -+ microblaze_supply_ptrace_register, -+}; -+ -+void -+initialize_low_arch (void) -+{ -+ init_registers_microblaze (); -+ -+ initialize_regsets_info (µblaze_regsets_info); -+} -\ No newline at end of file -diff -Nur gdb-7.8.2.orig/gdb/gdbserver/Makefile.in gdb-7.8.2/gdb/gdbserver/Makefile.in ---- gdb-7.8.2.orig/gdb/gdbserver/Makefile.in 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/gdb/gdbserver/Makefile.in 2016-05-14 21:29:38.993383375 +0200 -@@ -148,6 +148,7 @@ - $(srcdir)/linux-ia64-low.c $(srcdir)/linux-low.c \ - $(srcdir)/linux-m32r-low.c \ - $(srcdir)/linux-m68k-low.c $(srcdir)/linux-mips-low.c \ -+ $(srcdir)/linux-microblaze-low.c \ - $(srcdir)/linux-nios2-low.c \ - $(srcdir)/linux-ppc-low.c \ - $(srcdir)/linux-s390-low.c \ -@@ -329,6 +330,7 @@ - rm -f arm-with-iwmmxt.c - rm -f arm-with-vfpv2.c arm-with-vfpv3.c arm-with-neon.c - rm -f mips-linux.c mips64-linux.c -+ rm -f microblaze-linux.c - rm -f nios2-linux.c - rm -f powerpc-32.c powerpc-32l.c powerpc-64l.c powerpc-e500l.c - rm -f powerpc-altivec32l.c powerpc-cell32l.c powerpc-vsx32l.c -@@ -620,6 +622,8 @@ - $(SHELL) $(regdat_sh) $(srcdir)/../regformats/mips64-linux.dat mips64-linux.c - mips64-dsp-linux.c : $(srcdir)/../regformats/mips64-dsp-linux.dat $(regdat_sh) - $(SHELL) $(regdat_sh) $(srcdir)/../regformats/mips64-dsp-linux.dat mips64-dsp-linux.c -+microblaze-linux.c : $(srcdir)/../regformats/reg-microblaze.dat $(regdat_sh) -+ $(SHELL) $(regdat_sh) $(srcdir)/../regformats/reg-microblaze.dat microblaze-linux.c - nios2-linux.c : $(srcdir)/../regformats/nios2-linux.dat $(regdat_sh) - $(SHELL) $(regdat_sh) $(srcdir)/../regformats/nios2-linux.dat nios2-linux.c - powerpc-32.c : $(srcdir)/../regformats/rs6000/powerpc-32.dat $(regdat_sh) -diff -Nur gdb-7.8.2.orig/gdb/Makefile.in gdb-7.8.2/gdb/Makefile.in ---- gdb-7.8.2.orig/gdb/Makefile.in 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/gdb/Makefile.in 2016-05-14 21:29:38.993383375 +0200 -@@ -912,7 +912,7 @@ - annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \ - remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \ - sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \ --gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \ -+gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h microblaze-linux-tdep.h \ - psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \ - amd64-darwin-tdep.h charset-list.h \ - config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \ -@@ -1639,7 +1639,7 @@ - m68kbsd-nat.c m68kbsd-tdep.c \ - m68klinux-nat.c m68klinux-tdep.c \ - m88k-tdep.c m88kbsd-nat.c \ -- microblaze-tdep.c microblaze-linux-tdep.c \ -+ microblaze-tdep.c microblaze-linux-nat.c microblaze-linux-tdep.c \ - mingw-hdep.c \ - mips-linux-nat.c mips-linux-tdep.c \ - mips-irix-tdep.c \ -diff -Nur gdb-7.8.2.orig/gdb/microblaze-linux-nat.c gdb-7.8.2/gdb/microblaze-linux-nat.c ---- gdb-7.8.2.orig/gdb/microblaze-linux-nat.c 1970-01-01 01:00:00.000000000 +0100 -+++ gdb-7.8.2/gdb/microblaze-linux-nat.c 2016-05-14 21:29:38.993383375 +0200 -@@ -0,0 +1,430 @@ -+/* Microblaze GNU/Linux native support. -+ -+ Copyright (C) 1988-1989, 1991-1992, 1994, 1996, 2000-2012 Free -+ Software Foundation, Inc. -+ -+ This file is part of GDB. -+ -+ This program is free software; you can redistribute it and/or modify -+ it under the terms of the GNU General Public License as published by -+ the Free Software Foundation; either version 3 of the License, or -+ (at your option) any later version. -+ -+ This program is distributed in the hope that it will be useful, -+ but WITHOUT ANY WARRANTY; without even the implied warranty of -+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ GNU General Public License for more details. -+ -+ You should have received a copy of the GNU General Public License -+ along with this program. If not, see . */ -+ -+#include "defs.h" -+#include "arch-utils.h" -+#include "dis-asm.h" -+#include "frame.h" -+#include "trad-frame.h" -+#include "symtab.h" -+#include "value.h" -+#include "gdbcmd.h" -+#include "breakpoint.h" -+#include "inferior.h" -+#include "regcache.h" -+#include "target.h" -+#include "frame.h" -+#include "frame-base.h" -+#include "frame-unwind.h" -+#include "dwarf2-frame.h" -+#include "osabi.h" -+ -+#include "gdb_assert.h" -+#include "target-descriptions.h" -+#include "opcodes/microblaze-opcm.h" -+#include "opcodes/microblaze-dis.h" -+ -+#include "linux-nat.h" -+#include "target-descriptions.h" -+ -+#include -+#include -+#include -+#include -+ -+/* Prototypes for supply_gregset etc. */ -+#include "gregset.h" -+ -+#include "microblaze-tdep.h" -+ -+#include -+#include "auxv.h" -+ -+/* Defines ps_err_e, struct ps_prochandle. */ -+#include "gdb_proc_service.h" -+ -+/* On GNU/Linux, threads are implemented as pseudo-processes, in which -+ case we may be tracing more than one process at a time. In that -+ case, inferior_ptid will contain the main process ID and the -+ individual thread (process) ID. get_thread_id () is used to get -+ the thread id if it's available, and the process id otherwise. */ -+ -+int -+get_thread_id (ptid_t ptid) -+{ -+ int tid = ptid_get_lwp (ptid); -+ if (0 == tid) -+ tid = ptid_get_pid (ptid); -+ return tid; -+} -+ -+#define GET_THREAD_ID(PTID) get_thread_id (PTID) -+ -+/* Non-zero if our kernel may support the PTRACE_GETREGS and -+ PTRACE_SETREGS requests, for reading and writing the -+ general-purpose registers. Zero if we've tried one of -+ them and gotten an error. */ -+int have_ptrace_getsetregs = 1; -+ -+static int -+microblaze_register_u_addr (struct gdbarch *gdbarch, int regno) -+{ -+ int u_addr = -1; -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ /* NOTE: cagney/2003-11-25: This is the word size used by the ptrace -+ interface, and not the wordsize of the program's ABI. */ -+ int wordsize = sizeof (long); -+ -+ /* General purpose registers occupy 1 slot each in the buffer. */ -+ if (regno >= MICROBLAZE_R0_REGNUM -+ && regno <= MICROBLAZE_FSR_REGNUM) -+ u_addr = (regno * wordsize); -+ -+ return u_addr; -+} -+ -+ -+static void -+fetch_register (struct regcache *regcache, int tid, int regno) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ /* This isn't really an address. But ptrace thinks of it as one. */ -+ CORE_ADDR regaddr = microblaze_register_u_addr (gdbarch, regno); -+ int bytes_transferred; -+ unsigned int offset; /* Offset of registers within the u area. */ -+ char buf[MAX_REGISTER_SIZE]; -+ -+ if (regaddr == -1) -+ { -+ memset (buf, '\0', register_size (gdbarch, regno)); /* Supply zeroes */ -+ regcache_raw_supply (regcache, regno, buf); -+ return; -+ } -+ -+ /* Read the raw register using sizeof(long) sized chunks. On a -+ 32-bit platform, 64-bit floating-point registers will require two -+ transfers. */ -+ for (bytes_transferred = 0; -+ bytes_transferred < register_size (gdbarch, regno); -+ bytes_transferred += sizeof (long)) -+ { -+ long l; -+ -+ errno = 0; -+ l = ptrace (PTRACE_PEEKUSER, tid, (PTRACE_TYPE_ARG3) regaddr, 0); -+ regaddr += sizeof (long); -+ if (errno != 0) -+ { -+ char message[128]; -+ sprintf (message, "reading register %s (#%d)", -+ gdbarch_register_name (gdbarch, regno), regno); -+ perror_with_name (message); -+ } -+ memcpy (&buf[bytes_transferred], &l, sizeof (l)); -+ } -+ -+ /* Now supply the register. Keep in mind that the regcache's idea -+ of the register's size may not be a multiple of sizeof -+ (long). */ -+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE) -+ { -+ /* Little-endian values are always found at the left end of the -+ bytes transferred. */ -+ regcache_raw_supply (regcache, regno, buf); -+ } -+ else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) -+ { -+ /* Big-endian values are found at the right end of the bytes -+ transferred. */ -+ size_t padding = (bytes_transferred - register_size (gdbarch, regno)); -+ regcache_raw_supply (regcache, regno, buf + padding); -+ } -+ else -+ internal_error (__FILE__, __LINE__, -+ _("fetch_register: unexpected byte order: %d"), -+ gdbarch_byte_order (gdbarch)); -+} -+ -+/* This function actually issues the request to ptrace, telling -+ it to get all general-purpose registers and put them into the -+ specified regset. -+ -+ If the ptrace request does not exist, this function returns 0 -+ and properly sets the have_ptrace_* flag. If the request fails, -+ this function calls perror_with_name. Otherwise, if the request -+ succeeds, then the regcache gets filled and 1 is returned. */ -+static int -+fetch_all_gp_regs (struct regcache *regcache, int tid) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ gdb_gregset_t gregset; -+ -+ if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0) -+ { -+ if (errno == EIO) -+ { -+ have_ptrace_getsetregs = 0; -+ return 0; -+ } -+ perror_with_name (_("Couldn't get general-purpose registers.")); -+ } -+ -+ supply_gregset (regcache, (const gdb_gregset_t *) &gregset); -+ -+ return 1; -+} -+ -+ -+/* This is a wrapper for the fetch_all_gp_regs function. It is -+ responsible for verifying if this target has the ptrace request -+ that can be used to fetch all general-purpose registers at one -+ shot. If it doesn't, then we should fetch them using the -+ old-fashioned way, which is to iterate over the registers and -+ request them one by one. */ -+static void -+fetch_gp_regs (struct regcache *regcache, int tid) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ int i; -+ -+ if (have_ptrace_getsetregs) -+ if (fetch_all_gp_regs (regcache, tid)) -+ return; -+ -+ /* If we've hit this point, it doesn't really matter which -+ architecture we are using. We just need to read the -+ registers in the "old-fashioned way". */ -+ for (i = MICROBLAZE_R0_REGNUM; i <= MICROBLAZE_FSR_REGNUM; i++) -+ fetch_register (regcache, tid, i); -+} -+ -+ -+static void -+store_register (const struct regcache *regcache, int tid, int regno) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ /* This isn't really an address. But ptrace thinks of it as one. */ -+ CORE_ADDR regaddr = microblaze_register_u_addr (gdbarch, regno); -+ int i; -+ size_t bytes_to_transfer; -+ char buf[MAX_REGISTER_SIZE]; -+ -+ if (regaddr == -1) -+ return; -+ -+ /* First collect the register. Keep in mind that the regcache's -+ idea of the register's size may not be a multiple of sizeof -+ (long). */ -+ memset (buf, 0, sizeof buf); -+ bytes_to_transfer = align_up (register_size (gdbarch, regno), sizeof (long)); -+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE) -+ { -+ /* Little-endian values always sit at the left end of the buffer. */ -+ regcache_raw_collect (regcache, regno, buf); -+ } -+ else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) -+ { -+ /* Big-endian values sit at the right end of the buffer. */ -+ size_t padding = (bytes_to_transfer - register_size (gdbarch, regno)); -+ regcache_raw_collect (regcache, regno, buf + padding); -+ } -+ -+ for (i = 0; i < bytes_to_transfer; i += sizeof (long)) -+ { -+ long l; -+ -+ memcpy (&l, &buf[i], sizeof (l)); -+ errno = 0; -+ ptrace (PTRACE_POKEUSER, tid, (PTRACE_TYPE_ARG3) regaddr, l); -+ regaddr += sizeof (long); -+ -+ if (errno != 0) -+ { -+ char message[128]; -+ sprintf (message, "writing register %s (#%d)", -+ gdbarch_register_name (gdbarch, regno), regno); -+ perror_with_name (message); -+ } -+ } -+} -+ -+/* This function actually issues the request to ptrace, telling -+ it to store all general-purpose registers present in the specified -+ regset. -+ -+ If the ptrace request does not exist, this function returns 0 -+ and properly sets the have_ptrace_* flag. If the request fails, -+ this function calls perror_with_name. Otherwise, if the request -+ succeeds, then the regcache is stored and 1 is returned. */ -+static int -+store_all_gp_regs (const struct regcache *regcache, int tid, int regno) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ gdb_gregset_t gregset; -+ -+ if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0) -+ { -+ if (errno == EIO) -+ { -+ have_ptrace_getsetregs = 0; -+ return 0; -+ } -+ perror_with_name (_("Couldn't get general-purpose registers.")); -+ } -+ -+ fill_gregset (regcache, &gregset, regno); -+ -+ if (ptrace (PTRACE_SETREGS, tid, 0, (void *) &gregset) < 0) -+ { -+ if (errno == EIO) -+ { -+ have_ptrace_getsetregs = 0; -+ return 0; -+ } -+ perror_with_name (_("Couldn't set general-purpose registers.")); -+ } -+ -+ return 1; -+} -+ -+/* This is a wrapper for the store_all_gp_regs function. It is -+ responsible for verifying if this target has the ptrace request -+ that can be used to store all general-purpose registers at one -+ shot. If it doesn't, then we should store them using the -+ old-fashioned way, which is to iterate over the registers and -+ store them one by one. */ -+static void -+store_gp_regs (const struct regcache *regcache, int tid, int regno) -+{ -+ struct gdbarch *gdbarch = get_regcache_arch (regcache); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ int i; -+ -+ if (have_ptrace_getsetregs) -+ if (store_all_gp_regs (regcache, tid, regno)) -+ return; -+ -+ /* If we hit this point, it doesn't really matter which -+ architecture we are using. We just need to store the -+ registers in the "old-fashioned way". */ -+ for (i = MICROBLAZE_R0_REGNUM; i <= MICROBLAZE_FSR_REGNUM; i++) -+ store_register (regcache, tid, i); -+} -+ -+ -+/* Fetch registers from the child process. Fetch all registers if -+ regno == -1, otherwise fetch all general registers or all floating -+ point registers depending upon the value of regno. */ -+ -+static void -+microblaze_linux_fetch_inferior_registers (struct target_ops *ops, -+ struct regcache *regcache, int regno) -+{ -+ /* Get the thread id for the ptrace call. */ -+ int tid = GET_THREAD_ID (inferior_ptid); -+ -+ if (regno == -1) -+ fetch_gp_regs (regcache, tid); -+ else -+ fetch_register (regcache, tid, regno); -+} -+ -+/* Store registers back into the inferior. Store all registers if -+ regno == -1, otherwise store all general registers or all floating -+ point registers depending upon the value of regno. */ -+ -+static void -+microblaze_linux_store_inferior_registers (struct target_ops *ops, -+ struct regcache *regcache, int regno) -+{ -+ /* Get the thread id for the ptrace call. */ -+ int tid = GET_THREAD_ID (inferior_ptid); -+ -+ if (regno >= 0) -+ store_register (regcache, tid, regno); -+ else -+ store_gp_regs (regcache, tid, -1); -+} -+ -+/* Wrapper functions for the standard regset handling, used by -+ thread debugging. */ -+ -+void -+fill_gregset (const struct regcache *regcache, -+ gdb_gregset_t *gregsetp, int regno) -+{ -+ microblaze_collect_gregset (NULL, regcache, regno, gregsetp); -+} -+ -+void -+supply_gregset (struct regcache *regcache, const gdb_gregset_t *gregsetp) -+{ -+ microblaze_supply_gregset (NULL, regcache, -1, gregsetp); -+} -+ -+void -+fill_fpregset (const struct regcache *regcache, -+ gdb_fpregset_t *fpregsetp, int regno) -+{ -+ /* FIXME. */ -+} -+ -+void -+supply_fpregset (struct regcache *regcache, const gdb_fpregset_t *fpregsetp) -+{ -+ /* FIXME. */ -+} -+ -+static const struct target_desc * -+microblaze_linux_read_description (struct target_ops *ops) -+{ -+ CORE_ADDR microblaze_hwcap = 0; -+ -+ if (target_auxv_search (ops, AT_HWCAP, µblaze_hwcap) != 1) -+ return NULL; -+ -+ return NULL; -+} -+ -+ -+void _initialize_microblaze_linux_nat (void); -+ -+void -+_initialize_microblaze_linux_nat (void) -+{ -+ struct target_ops *t; -+ -+ /* Fill in the generic GNU/Linux methods. */ -+ t = linux_target (); -+ -+ /* Add our register access methods. */ -+ t->to_fetch_registers = microblaze_linux_fetch_inferior_registers; -+ t->to_store_registers = microblaze_linux_store_inferior_registers; -+ -+ t->to_read_description = microblaze_linux_read_description; -+ -+ /* Register the target. */ -+ linux_nat_add_target (t); -+} -diff -Nur gdb-7.8.2.orig/gdb/microblaze-linux-tdep.c gdb-7.8.2/gdb/microblaze-linux-tdep.c ---- gdb-7.8.2.orig/gdb/microblaze-linux-tdep.c 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/gdb/microblaze-linux-tdep.c 2016-05-15 13:56:18.171253048 +0200 -@@ -1,6 +1,6 @@ - /* Target-dependent code for Xilinx MicroBlaze. - -- Copyright (C) 2009-2014 Free Software Foundation, Inc. -+ Copyright (C) 2009-2013 Free Software Foundation, Inc. - - This file is part of GDB. - -@@ -32,11 +32,28 @@ - #include "regset.h" - #include "solib-svr4.h" - #include "microblaze-tdep.h" -+#include "glibc-tdep.h" - #include "trad-frame.h" - #include "frame-unwind.h" - #include "tramp-frame.h" - #include "linux-tdep.h" - -+static int microblaze_debug_flag = 0; -+ -+static void -+microblaze_debug (const char *fmt, ...) -+{ -+ if (microblaze_debug_flag) -+ { -+ va_list args; -+ -+ va_start (args, fmt); -+ printf_unfiltered ("MICROBLAZE LINUX: "); -+ vprintf_unfiltered (fmt, args); -+ va_end (args); -+ } -+} -+ - static int - microblaze_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, - struct bp_target_info *bp_tgt) -@@ -46,20 +63,27 @@ - int val; - int bplen; - gdb_byte old_contents[BREAKPOINT_MAX]; -+ struct cleanup *cleanup; - - /* Determine appropriate breakpoint contents and size for this address. */ - bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen); - if (bp == NULL) - error (_("Software breakpoints not implemented for this target.")); - -+ /* Make sure we see the memory breakpoints. */ -+ cleanup = make_show_memory_breakpoints_cleanup (1); - val = target_read_memory (addr, old_contents, bplen); - - /* If our breakpoint is no longer at the address, this means that the - program modified the code on us, so it is wrong to put back the - old value. */ - if (val == 0 && memcmp (bp, old_contents, bplen) == 0) -- val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen); -+ { -+ val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen); -+ microblaze_debug ("microblaze_linux_memory_remove_breakpoint writing back to memory at addr 0x%lx\n", addr); -+ } - -+ do_cleanups (cleanup); - return val; - } - -@@ -116,6 +140,50 @@ - microblaze_linux_sighandler_cache_init - }; - -+const struct microblaze_gregset microblaze_linux_core_gregset; -+ -+static void -+microblaze_linux_supply_core_gregset (const struct regset *regset, -+ struct regcache *regcache, -+ int regnum, const void *gregs, size_t len) -+{ -+ microblaze_supply_gregset (µblaze_linux_core_gregset, regcache, -+ regnum, gregs); -+} -+ -+static void -+microblaze_linux_collect_core_gregset (const struct regset *regset, -+ const struct regcache *regcache, -+ int regnum, void *gregs, size_t len) -+{ -+ microblaze_collect_gregset (µblaze_linux_core_gregset, regcache, -+ regnum, gregs); -+} -+ -+static void -+microblaze_linux_supply_core_fpregset (const struct regset *regset, -+ struct regcache *regcache, -+ int regnum, const void *fpregs, size_t len) -+{ -+ /* FIXME. */ -+ microblaze_supply_fpregset (regcache, regnum, fpregs); -+} -+ -+static void -+microblaze_linux_collect_core_fpregset (const struct regset *regset, -+ const struct regcache *regcache, -+ int regnum, void *fpregs, size_t len) -+{ -+ /* FIXME. */ -+ microblaze_collect_fpregset (regcache, regnum, fpregs); -+} -+ -+static const struct regset microblaze_linux_gregset = -+{ -+ NULL, -+ microblaze_linux_supply_core_gregset, -+ microblaze_linux_collect_core_gregset -+}; - - static void - microblaze_linux_init_abi (struct gdbarch_info info, -@@ -123,6 +191,9 @@ - { - struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); - -+ tdep->gregset = µblaze_linux_gregset; -+ tdep->sizeof_gregset = 200; -+ - linux_init_abi (info, gdbarch); - - set_gdbarch_memory_remove_breakpoint (gdbarch, -@@ -135,6 +206,25 @@ - /* Trampolines. */ - tramp_frame_prepend_unwinder (gdbarch, - µblaze_linux_sighandler_tramp_frame); -+ -+ /* BFD target for core files. */ -+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) -+ set_gdbarch_gcore_bfd_target (gdbarch, "elf32-microblaze"); -+ else -+ set_gdbarch_gcore_bfd_target (gdbarch, "elf32-microblazeel"); -+ -+ -+ /* Shared library handling. */ -+ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); -+ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); -+ -+ set_gdbarch_regset_from_core_section (gdbarch, -+ microblaze_regset_from_core_section); -+ -+ /* Enable TLS support. */ -+ set_gdbarch_fetch_tls_load_module_address (gdbarch, -+ svr4_fetch_objfile_link_map); -+ - } - - /* -Wmissing-prototypes */ -diff -Nur gdb-7.8.2.orig/gdb/microblaze-rom.c gdb-7.8.2/gdb/microblaze-rom.c ---- gdb-7.8.2.orig/gdb/microblaze-rom.c 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/gdb/microblaze-rom.c 2016-05-14 21:29:38.997383530 +0200 -@@ -1,6 +1,6 @@ - /* Remote debugging interface to Xilinx MicroBlaze. - -- Copyright (C) 2009-2014 Free Software Foundation, Inc. -+ Copyright (C) 2009-2013 Free Software Foundation, Inc. - - This file is part of GDB. - -@@ -21,7 +21,6 @@ - #include "gdbcore.h" - #include "target.h" - #include "monitor.h" --#include - #include "serial.h" - #include "regcache.h" - -diff -Nur gdb-7.8.2.orig/gdb/microblaze-tdep.c gdb-7.8.2/gdb/microblaze-tdep.c ---- gdb-7.8.2.orig/gdb/microblaze-tdep.c 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/gdb/microblaze-tdep.c 2016-05-14 21:29:38.997383530 +0200 -@@ -1,6 +1,6 @@ - /* Target-dependent code for Xilinx MicroBlaze. - -- Copyright (C) 2009-2014 Free Software Foundation, Inc. -+ Copyright (C) 2009-2013 Free Software Foundation, Inc. - - This file is part of GDB. - -@@ -29,13 +29,13 @@ - #include "inferior.h" - #include "regcache.h" - #include "target.h" -+#include "frame.h" - #include "frame-base.h" - #include "frame-unwind.h" - #include "dwarf2-frame.h" - #include "osabi.h" - - #include "gdb_assert.h" --#include - #include "target-descriptions.h" - #include "opcodes/microblaze-opcm.h" - #include "opcodes/microblaze-dis.h" -@@ -73,7 +73,8 @@ - "rpc", "rmsr", "rear", "resr", "rfsr", "rbtr", - "rpvr0", "rpvr1", "rpvr2", "rpvr3", "rpvr4", "rpvr5", "rpvr6", - "rpvr7", "rpvr8", "rpvr9", "rpvr10", "rpvr11", -- "redr", "rpid", "rzpr", "rtlbx", "rtlbsx", "rtlblo", "rtlbhi" -+ "redr", "rpid", "rzpr", "rtlbx", "rtlbsx", "rtlblo", "rtlbhi", -+ "rslr", "rshr" - }; - - #define MICROBLAZE_NUM_REGS ARRAY_SIZE (microblaze_register_names) -@@ -145,6 +146,14 @@ - return sp; - } - -+static CORE_ADDR -+microblaze_store_arguments (struct regcache *regcache, int nargs, -+ struct value **args, CORE_ADDR sp, -+ int struct_return, CORE_ADDR struct_addr) -+{ -+ error (_("store_arguments not implemented")); -+ return sp; -+} - - static CORE_ADDR - microblaze_push_dummy_call (struct gdbarch *gdbarch, struct value *function, -@@ -156,14 +165,52 @@ - return sp; - } - -+static int -+microblaze_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, -+ struct bp_target_info *bp_tgt) -+{ -+ CORE_ADDR addr = bp_tgt->placed_address; -+ const unsigned char *bp; -+ int val; -+ int bplen; -+ gdb_byte old_contents[BREAKPOINT_MAX]; -+ struct cleanup *cleanup; -+ -+ /* Determine appropriate breakpoint contents and size for this address. */ -+ bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen); -+ if (bp == NULL) -+ error (_("Software breakpoints not implemented for this target.")); -+ -+ /* Make sure we see the memory breakpoints. */ -+ cleanup = make_show_memory_breakpoints_cleanup (1); -+ val = target_read_memory (addr, old_contents, bplen); -+ -+ /* If our breakpoint is no longer at the address, this means that the -+ program modified the code on us, so it is wrong to put back the -+ old value. */ -+ if (val == 0 && memcmp (bp, old_contents, bplen) == 0) -+ { -+ val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen); -+ microblaze_debug ("microblaze_linux_memory_remove_breakpoint writing back to memory at addr 0x%lx\n", addr); -+ } -+ -+ do_cleanups (cleanup); -+ return val; -+} -+ - static const gdb_byte * - microblaze_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pc, - int *len) - { -+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); - static gdb_byte break_insn[] = MICROBLAZE_BREAKPOINT; -+ static gdb_byte break_insn_le[] = MICROBLAZE_BREAKPOINT_LE; - - *len = sizeof (break_insn); -- return break_insn; -+ if (byte_order == BFD_ENDIAN_BIG) -+ return break_insn; -+ else -+ return break_insn_le; - } - - /* Allocate and initialize a frame cache. */ -@@ -178,6 +225,7 @@ - /* Base address. */ - cache->base = 0; - cache->pc = 0; -+ cache->saved_sp = 0; - - /* Frameless until proven otherwise. */ - cache->frameless_p = 1; -@@ -234,6 +282,8 @@ - int flags = 0; - int save_hidden_pointer_found = 0; - int non_stack_instruction_found = 0; -+ int n_insns; -+ unsigned int *insn_block; - - /* Find the start of this function. */ - find_pc_partial_function (pc, &name, &func_addr, &func_end); -@@ -273,11 +323,18 @@ - name, paddress (gdbarch, func_addr), - paddress (gdbarch, stop)); - -+/* Do a block read to minimize the transaction with the Debug Agent */ -+ n_insns = (stop == func_addr) ? 1 : ((stop - func_addr) / INST_WORD_SIZE); -+ insn_block = calloc(n_insns, sizeof(unsigned long)); -+ -+ target_read_memory (func_addr, (void*) insn_block, n_insns * INST_WORD_SIZE ); -+ - for (addr = func_addr; addr < stop; addr += INST_WORD_SIZE) - { - insn = microblaze_fetch_instruction (addr); -+ //insn = insn_block[(addr - func_addr) / INST_WORD_SIZE]; - op = microblaze_decode_insn (insn, &rd, &ra, &rb, &imm); -- microblaze_debug ("%s %08lx\n", paddress (gdbarch, pc), insn); -+ microblaze_debug ("%s %08lx op=%x r%d r%d imm=%d\n", paddress (gdbarch, addr), insn, op, rd, ra, imm); - - /* This code is very sensitive to what functions are present in the - prologue. It assumes that the (addi, addik, swi, sw) can be the -@@ -291,6 +348,7 @@ - cache->frameless_p = 0; /* Frame found. */ - save_hidden_pointer_found = 0; - non_stack_instruction_found = 0; -+ cache->register_offsets[rd] = -imm; - continue; - } - else if (IS_SPILL_SP(op, rd, ra)) -@@ -401,8 +459,8 @@ - part of the prologue. */ - if (save_hidden_pointer_found) - prologue_end_addr -= INST_WORD_SIZE; -- -- return prologue_end_addr; -+ free(insn_block); -+ return prologue_end_addr; - } - - static CORE_ADDR -@@ -452,6 +510,7 @@ - return start_pc; - } - -+enum { REG_UNAVAIL = (CORE_ADDR) -1 }; - /* Normal frames. */ - - static struct microblaze_frame_cache * -@@ -459,7 +518,7 @@ - { - struct microblaze_frame_cache *cache; - struct gdbarch *gdbarch = get_frame_arch (next_frame); -- CORE_ADDR func; -+ CORE_ADDR current_pc; - int rn; - - if (*this_cache) -@@ -473,9 +532,18 @@ - for (rn = 0; rn < gdbarch_num_regs (gdbarch); rn++) - cache->register_offsets[rn] = -1; - -- func = get_frame_func (next_frame); -+ cache->pc = get_frame_func (next_frame); -+ current_pc = get_frame_pc (next_frame); -+ -+ if (cache->pc) -+ microblaze_analyze_prologue (gdbarch, cache->pc, current_pc, -+ cache); -+ -+ cache->base = get_frame_register_unsigned (next_frame, gdbarch_sp_regnum (gdbarch)); -+ cache->saved_sp = cache->base + cache->framesize; - -- cache->pc = get_frame_address_in_block (next_frame); -+ cache->register_offsets[MICROBLAZE_PREV_PC_REGNUM] = cache->base; -+ cache->register_offsets[MICROBLAZE_SP_REGNUM] = cache->saved_sp; - - return cache; - } -@@ -501,6 +569,14 @@ - struct microblaze_frame_cache *cache = - microblaze_frame_cache (this_frame, this_cache); - -+ if ((regnum == MICROBLAZE_SP_REGNUM && -+ cache->register_offsets[MICROBLAZE_SP_REGNUM]) -+ || (regnum == MICROBLAZE_FP_REGNUM && -+ cache->register_offsets[MICROBLAZE_SP_REGNUM])) -+ -+ return frame_unwind_got_constant (this_frame, regnum, -+ cache->register_offsets[MICROBLAZE_SP_REGNUM]); -+ - if (cache->frameless_p) - { - if (regnum == MICROBLAZE_PC_REGNUM) -@@ -508,11 +584,18 @@ - if (regnum == MICROBLAZE_SP_REGNUM) - regnum = 1; - return trad_frame_get_prev_register (this_frame, -- cache->saved_regs, regnum); -+ cache->saved_regs, regnum); - } -- else -- return trad_frame_get_prev_register (this_frame, cache->saved_regs, -- regnum); -+ -+ if (regnum == MICROBLAZE_PC_REGNUM) -+ { -+ regnum = 15; -+ return frame_unwind_got_memory (this_frame, regnum, -+ cache->register_offsets[MICROBLAZE_PREV_PC_REGNUM]); -+ } -+ -+ return trad_frame_get_prev_register (this_frame, cache->saved_regs, -+ regnum); - - } - -@@ -536,6 +619,12 @@ - return cache->base; - } - -+static const struct frame_unwind * -+microblaze_frame_sniffer (struct frame_info *next_frame) -+{ -+ return µblaze_frame_unwind; -+} -+ - static const struct frame_base microblaze_frame_base = - { - µblaze_frame_unwind, -@@ -628,6 +717,109 @@ - return (TYPE_LENGTH (type) == 16); - } - -+int -+microblaze_software_single_step (struct frame_info *frame) -+{ -+ struct gdbarch *arch = get_frame_arch (frame); -+ struct address_space *aspace = get_frame_address_space (frame); -+ struct gdbarch_tdep *tdep = gdbarch_tdep (arch); -+ static char le_breakp[] = MICROBLAZE_BREAKPOINT_LE; -+ static char be_breakp[] = MICROBLAZE_BREAKPOINT; -+ enum bfd_endian byte_order = gdbarch_byte_order (arch); -+ char *breakp = byte_order == BFD_ENDIAN_BIG ? be_breakp : le_breakp; -+ int ret = 0; -+ -+ /* Save the address and the values of the next_pc and the target */ -+ static struct sstep_breaks -+ { -+ CORE_ADDR address; -+ bfd_boolean valid; -+ /* Shadow contents. */ -+ char data[INST_WORD_SIZE]; -+ } stepbreaks[2]; -+ int ii; -+ -+ if (1) -+ { -+ CORE_ADDR pc; -+ long insn; -+ enum microblaze_instr minstr; -+ bfd_boolean isunsignednum; -+ enum microblaze_instr_type insn_type; -+ short delay_slots; -+ int imm; -+ bfd_boolean immfound = FALSE; -+ -+ /* Set a breakpoint at the next instruction */ -+ /* If the current instruction is an imm, set it at the inst after */ -+ /* If the instruction has a delay slot, skip the delay slot */ -+ pc = get_frame_pc (frame); -+ insn = microblaze_fetch_instruction (pc); -+ minstr = get_insn_microblaze (insn, &isunsignednum, &insn_type, &delay_slots); -+ if (insn_type == immediate_inst) -+ { -+ int rd, ra, rb; -+ immfound = TRUE; -+ minstr = microblaze_decode_insn (insn, &rd, &ra, &rb, &imm); -+ pc = pc + INST_WORD_SIZE; -+ insn = microblaze_fetch_instruction (pc); -+ minstr = get_insn_microblaze (insn, &isunsignednum, &insn_type, &delay_slots); -+ } -+ stepbreaks[0].address = pc + (delay_slots * INST_WORD_SIZE) + INST_WORD_SIZE; -+ if (insn_type != return_inst) { -+ stepbreaks[0].valid = TRUE; -+ } else { -+ stepbreaks[0].valid = FALSE; -+ } -+ -+ microblaze_debug ("single-step insn_type=%x insn=%x\n", insn_type, insn); -+ /* Now check for branch or return instructions */ -+ if (insn_type == branch_inst || insn_type == return_inst) { -+ int limm; -+ int lrd, lra, lrb; -+ int ra, rb; -+ bfd_boolean targetvalid; -+ bfd_boolean unconditionalbranch; -+ microblaze_decode_insn(insn, &lrd, &lra, &lrb, &limm); -+ if (lra >= 0 && lra < MICROBLAZE_NUM_REGS) -+ ra = get_frame_register_unsigned (frame, lra); -+ else -+ ra = 0; -+ if (lrb >= 0 && lrb < MICROBLAZE_NUM_REGS) -+ rb = get_frame_register_unsigned (frame, lrb); -+ else -+ rb = 0; -+ -+ stepbreaks[1].address = microblaze_get_target_address (insn, immfound, imm, pc, ra, rb, &targetvalid, &unconditionalbranch); -+ microblaze_debug ("single-step uncondbr=%d targetvalid=%d target=%x\n", unconditionalbranch, targetvalid, stepbreaks[1].address); -+ -+ if (unconditionalbranch) -+ stepbreaks[0].valid = FALSE; /* This is a unconditional branch: will not come to the next address */ -+ if (targetvalid && (stepbreaks[0].valid == FALSE || -+ (stepbreaks[0].address != stepbreaks[1].address)) -+ && (stepbreaks[1].address != pc)) { -+ stepbreaks[1].valid = TRUE; -+ } else { -+ stepbreaks[1].valid = FALSE; -+ } -+ } else { -+ stepbreaks[1].valid = FALSE; -+ } -+ -+ /* Insert the breakpoints */ -+ for (ii = 0; ii < 2; ++ii) -+ { -+ -+ /* ignore invalid breakpoint. */ -+ if (stepbreaks[ii].valid) { -+ insert_single_step_breakpoint (arch, aspace, stepbreaks[ii].address); -+ ret = 1; -+ } -+ } -+ } -+ return ret; -+} -+ - static void - microblaze_write_pc (struct regcache *regcache, CORE_ADDR pc) - { -@@ -664,6 +856,70 @@ - return dwarf2_to_reg_map[reg]; - } - -+ -+void -+microblaze_supply_gregset (const struct microblaze_gregset *gregset, -+ struct regcache *regcache, -+ int regnum, const void *gregs) -+{ -+ unsigned int *regs = gregs; -+ if (regnum >= 0) -+ regcache_raw_supply (regcache, regnum, regs + regnum); -+ -+ if (regnum == -1) { -+ int i; -+ -+ for (i = 0; i < 50; i++) { -+ regcache_raw_supply (regcache, i, regs + i); -+ } -+ } -+} -+ -+ -+void -+microblaze_collect_gregset (const struct microblaze_gregset *gregset, -+ const struct regcache *regcache, -+ int regnum, void *gregs) -+{ -+ /* FIXME. */ -+} -+ -+void -+microblaze_supply_fpregset (struct regcache *regcache, -+ int regnum, const void *fpregs) -+{ -+ /* FIXME. */ -+} -+ -+void -+microblaze_collect_fpregset (const struct regcache *regcache, -+ int regnum, void *fpregs) -+{ -+ /* FIXME. */ -+} -+ -+ -+/* Return the appropriate register set for the core section identified -+ by SECT_NAME and SECT_SIZE. */ -+ -+const struct regset * -+microblaze_regset_from_core_section (struct gdbarch *gdbarch, -+ const char *sect_name, size_t sect_size) -+{ -+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); -+ -+ microblaze_debug ("microblaze_regset_from_core_section, sect_name = %s\n", sect_name); -+ -+ if (strcmp (sect_name, ".reg") == 0 && sect_size >= tdep->sizeof_gregset) -+ return tdep->gregset; -+ -+ if (strcmp (sect_name, ".reg2") == 0 && sect_size >= tdep->sizeof_fpregset) -+ return tdep->fpregset; -+ -+ microblaze_debug ("microblaze_regset_from_core_section returning null :-( \n"); -+ return NULL; -+} -+ - static struct gdbarch * - microblaze_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) - { -@@ -679,6 +935,11 @@ - tdep = XNEW (struct gdbarch_tdep); - gdbarch = gdbarch_alloc (&info, tdep); - -+ tdep->gregset = NULL; -+ tdep->sizeof_gregset = 0; -+ tdep->fpregset = NULL; -+ tdep->sizeof_fpregset = 0; -+ - set_gdbarch_long_double_bit (gdbarch, 128); - - set_gdbarch_num_regs (gdbarch, MICROBLAZE_NUM_REGS); -@@ -706,7 +967,10 @@ - /* Stack grows downward. */ - set_gdbarch_inner_than (gdbarch, core_addr_lessthan); - -+ set_gdbarch_memory_remove_breakpoint (gdbarch, microblaze_linux_memory_remove_breakpoint); -+ - set_gdbarch_breakpoint_from_pc (gdbarch, microblaze_breakpoint_from_pc); -+ set_gdbarch_software_single_step (gdbarch, microblaze_software_single_step); - - set_gdbarch_frame_args_skip (gdbarch, 8); - -@@ -725,6 +989,13 @@ - dwarf2_append_unwinders (gdbarch); - frame_unwind_append_unwinder (gdbarch, µblaze_frame_unwind); - frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer); -+ //frame_base_append_sniffer (gdbarch, microblaze_frame_sniffer); -+ -+ /* If we have register sets, enable the generic core file support. */ -+ if (tdep->gregset) { -+ set_gdbarch_regset_from_core_section (gdbarch, -+ microblaze_regset_from_core_section); -+ } - - return gdbarch; - } -diff -Nur gdb-7.8.2.orig/gdb/microblaze-tdep.h gdb-7.8.2/gdb/microblaze-tdep.h ---- gdb-7.8.2.orig/gdb/microblaze-tdep.h 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/gdb/microblaze-tdep.h 2016-05-14 21:29:38.997383530 +0200 -@@ -1,6 +1,6 @@ - /* Target-dependent code for Xilinx MicroBlaze. - -- Copyright (C) 2009-2014 Free Software Foundation, Inc. -+ Copyright (C) 2009-2013 Free Software Foundation, Inc. - - This file is part of GDB. - -@@ -22,8 +22,22 @@ - - - /* Microblaze architecture-specific information. */ -+struct microblaze_gregset -+{ -+ unsigned int gregs[32]; -+ unsigned int fpregs[32]; -+ unsigned int pregs[16]; -+}; -+ - struct gdbarch_tdep - { -+ int dummy; // declare something. -+ -+ /* Register sets. */ -+ struct regset *gregset; -+ size_t sizeof_gregset; -+ struct regset *fpregset; -+ size_t sizeof_fpregset; - }; - - struct microblaze_frame_cache -@@ -42,7 +56,8 @@ - int fp_regnum; - - /* Offsets to saved registers. */ -- int register_offsets[57]; /* Must match MICROBLAZE_NUM_REGS. */ -+ int register_offsets[59]; /* Must match MICROBLAZE_NUM_REGS. */ -+ CORE_ADDR saved_sp; - - /* Table of saved registers. */ - struct trad_frame_saved_reg *saved_regs; -@@ -66,11 +81,11 @@ - MICROBLAZE_R12_REGNUM, - MICROBLAZE_R13_REGNUM, - MICROBLAZE_R14_REGNUM, -- MICROBLAZE_R15_REGNUM, -+ MICROBLAZE_R15_REGNUM, MICROBLAZE_PREV_PC_REGNUM = MICROBLAZE_R15_REGNUM, - MICROBLAZE_R16_REGNUM, - MICROBLAZE_R17_REGNUM, - MICROBLAZE_R18_REGNUM, -- MICROBLAZE_R19_REGNUM, -+ MICROBLAZE_R19_REGNUM, MICROBLAZE_FP_REGNUM = MICROBLAZE_R19_REGNUM, - MICROBLAZE_R20_REGNUM, - MICROBLAZE_R21_REGNUM, - MICROBLAZE_R22_REGNUM, -@@ -107,7 +122,9 @@ - MICROBLAZE_RTLBX_REGNUM, - MICROBLAZE_RTLBSX_REGNUM, - MICROBLAZE_RTLBLO_REGNUM, -- MICROBLAZE_RTLBHI_REGNUM -+ MICROBLAZE_RTLBHI_REGNUM, -+ MICROBLAZE_SLR_REGNUM, -+ MICROBLAZE_SHR_REGNUM - }; - - /* All registers are 32 bits. */ -@@ -115,6 +132,21 @@ - - /* MICROBLAZE_BREAKPOINT defines the breakpoint that should be used. - Only used for native debugging. */ --#define MICROBLAZE_BREAKPOINT {0xb9, 0xcc, 0x00, 0x60} -+#define MICROBLAZE_BREAKPOINT {0xba, 0x0c, 0x00, 0x18} -+#define MICROBLAZE_BREAKPOINT_LE {0x18, 0x00, 0x0c, 0xba} -+ -+extern void microblaze_supply_gregset (const struct microblaze_gregset *gregset, -+ struct regcache *regcache, -+ int regnum, const void *gregs); -+extern void microblaze_collect_gregset (const struct microblaze_gregset *gregset, -+ const struct regcache *regcache, -+ int regnum, void *gregs); -+extern void microblaze_supply_fpregset (struct regcache *regcache, -+ int regnum, const void *fpregs); -+extern void microblaze_collect_fpregset (const struct regcache *regcache, -+ int regnum, void *fpregs); -+ -+extern const struct regset * microblaze_regset_from_core_section (struct gdbarch *gdbarch, -+ const char *sect_name, size_t sect_size); - - #endif /* microblaze-tdep.h */ -diff -Nur gdb-7.8.2.orig/gdb/regformats/reg-microblaze.dat gdb-7.8.2/gdb/regformats/reg-microblaze.dat ---- gdb-7.8.2.orig/gdb/regformats/reg-microblaze.dat 1970-01-01 01:00:00.000000000 +0100 -+++ gdb-7.8.2/gdb/regformats/reg-microblaze.dat 2016-05-14 21:29:38.997383530 +0200 -@@ -0,0 +1,41 @@ -+name:microblaze -+expedite:r1,pc -+32:r0 -+32:r1 -+32:r2 -+32:r3 -+32:r4 -+32:r5 -+32:r6 -+32:r7 -+32:r8 -+32:r9 -+32:r10 -+32:r11 -+32:r12 -+32:r13 -+32:r14 -+32:r15 -+32:r16 -+32:r17 -+32:r18 -+32:r19 -+32:r20 -+32:r21 -+32:r22 -+32:r23 -+32:r24 -+32:r25 -+32:r26 -+32:r27 -+32:r28 -+32:r29 -+32:r30 -+32:r31 -+32:pc -+32:msr -+32:ear -+32:esr -+32:fsr -+32:slr -+32:shr -diff -Nur gdb-7.8.2.orig/include/elf/microblaze.h gdb-7.8.2/include/elf/microblaze.h ---- gdb-7.8.2.orig/include/elf/microblaze.h 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/include/elf/microblaze.h 2016-05-14 21:29:38.997383530 +0200 -@@ -58,6 +58,7 @@ - RELOC_NUMBER (R_MICROBLAZE_TLSDTPREL64, 27) /* TLS Offset Within TLS Block */ - RELOC_NUMBER (R_MICROBLAZE_TLSGOTTPREL32, 28) /* TLS Offset From Thread Pointer */ - RELOC_NUMBER (R_MICROBLAZE_TLSTPREL32, 29) /* TLS Offset From Thread Pointer */ -+ RELOC_NUMBER (R_MICROBLAZE_32_NONE, 30) - - END_RELOC_NUMBERS (R_MICROBLAZE_max) - -diff -Nur gdb-7.8.2.orig/opcodes/microblaze-opc.h gdb-7.8.2/opcodes/microblaze-opc.h ---- gdb-7.8.2.orig/opcodes/microblaze-opc.h 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/opcodes/microblaze-opc.h 2016-05-14 21:29:38.997383530 +0200 -@@ -91,6 +91,7 @@ - #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */ - #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */ - #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */ -+#define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */ - #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */ - - /* New Mask for msrset, msrclr insns. */ -@@ -101,7 +102,7 @@ - #define DELAY_SLOT 1 - #define NO_DELAY_SLOT 0 - --#define MAX_OPCODES 289 -+#define MAX_OPCODES 291 - - struct op_code_struct - { -@@ -174,7 +175,9 @@ - {"wic", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000068, OPCODE_MASK_H34B, wic, special_inst }, - {"wdc", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000064, OPCODE_MASK_H34B, wdc, special_inst }, - {"wdc.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000066, OPCODE_MASK_H34B, wdcclear, special_inst }, -+ {"wdc.ext.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000466, OPCODE_MASK_H35B, wdcextclear, special_inst }, - {"wdc.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000074, OPCODE_MASK_H34B, wdcflush, special_inst }, -+ {"wdc.ext.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000476, OPCODE_MASK_H35B, wdcextflush, special_inst }, - {"mts", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9400C000, OPCODE_MASK_H13S, mts, special_inst }, - {"mfs", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94008000, OPCODE_MASK_H23S, mfs, special_inst }, - {"br", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98000000, OPCODE_MASK_H124, br, branch_inst }, -diff -Nur gdb-7.8.2.orig/opcodes/microblaze-opcm.h gdb-7.8.2/opcodes/microblaze-opcm.h ---- gdb-7.8.2.orig/opcodes/microblaze-opcm.h 2015-01-15 11:58:12.000000000 +0100 -+++ gdb-7.8.2/opcodes/microblaze-opcm.h 2016-05-14 21:29:38.997383530 +0200 -@@ -31,9 +31,9 @@ - idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput, - ncget, ncput, muli, bslli, bsrai, bsrli, mului, or, and, xor, - andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16, -- wic, wdc, wdcclear, wdcflush, mts, mfs, mbar, br, brd, -- brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt, -- bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni, -+ wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, mts, mfs, mbar, -+ br, brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, -+ blt, bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni, - imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid, - brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti, - bgtid, bgei, bgeid, lbu, lbur, lhu, lhur, lw, lwr, lwx, sb, sbr, sh, diff --git a/package/gdb-microblaze/patches/patch-bfd_bfd-in2_h b/package/gdb-microblaze/patches/patch-bfd_bfd-in2_h new file mode 100644 index 000000000..05c551dd3 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-bfd_bfd-in2_h @@ -0,0 +1,14 @@ +--- gdb-7.8.2.orig/bfd/bfd-in2.h 2015-01-15 11:58:11.000000000 +0100 ++++ gdb-7.8.2/bfd/bfd-in2.h 2016-09-21 10:34:30.025222164 +0200 +@@ -5449,6 +5449,11 @@ value relative to the read-write small d + expressions of the form "Symbol Op Symbol" */ + BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM, + ++/* This is a 32 bit reloc that stores the 32 bit pc relative ++value in two words (with an imm instruction). No relocation is ++done here - only used for relaxing */ ++ BFD_RELOC_MICROBLAZE_32_NONE, ++ + /* This is a 64 bit reloc that stores the 32 bit pc relative + value in two words (with an imm instruction). No relocation is + done here - only used for relaxing */ diff --git a/package/gdb-microblaze/patches/patch-bfd_elf32-microblaze_c b/package/gdb-microblaze/patches/patch-bfd_elf32-microblaze_c new file mode 100644 index 000000000..9c3cd884c --- /dev/null +++ b/package/gdb-microblaze/patches/patch-bfd_elf32-microblaze_c @@ -0,0 +1,202 @@ +--- gdb-7.8.2.orig/bfd/elf32-microblaze.c 2015-01-15 11:58:11.000000000 +0100 ++++ gdb-7.8.2/bfd/elf32-microblaze.c 2016-09-21 10:34:30.025222164 +0200 +@@ -177,6 +177,20 @@ static reloc_howto_type microblaze_elf_h + FALSE), /* PC relative offset? */ + + /* This reloc does nothing. Used for relaxation. */ ++ HOWTO (R_MICROBLAZE_32_NONE, /* Type. */ ++ 0, /* Rightshift. */ ++ 2, /* Size (0 = byte, 1 = short, 2 = long). */ ++ 32, /* Bitsize. */ ++ TRUE, /* PC_relative. */ ++ 0, /* Bitpos. */ ++ complain_overflow_bitfield, /* Complain on overflow. */ ++ NULL, /* Special Function. */ ++ "R_MICROBLAZE_32_NONE",/* Name. */ ++ FALSE, /* Partial Inplace. */ ++ 0, /* Source Mask. */ ++ 0, /* Dest Mask. */ ++ FALSE), /* PC relative offset? */ ++ + HOWTO (R_MICROBLAZE_64_NONE, /* Type. */ + 0, /* Rightshift. */ + 2, /* Size (0 = byte, 1 = short, 2 = long). */ +@@ -532,7 +546,10 @@ microblaze_elf_reloc_type_lookup (bfd * + case BFD_RELOC_NONE: + microblaze_reloc = R_MICROBLAZE_NONE; + break; +- case BFD_RELOC_MICROBLAZE_64_NONE: ++ case BFD_RELOC_MICROBLAZE_32_NONE: ++ microblaze_reloc = R_MICROBLAZE_32_NONE; ++ break; ++ case BFD_RELOC_MICROBLAZE_64_NONE: + microblaze_reloc = R_MICROBLAZE_64_NONE; + break; + case BFD_RELOC_32: +@@ -668,6 +685,67 @@ microblaze_elf_is_local_label_name (bfd + return _bfd_elf_is_local_label_name (abfd, name); + } + ++/* Support for core dump NOTE sections. */ ++static bfd_boolean ++microblaze_elf_grok_prstatus (bfd *abfd, Elf_Internal_Note *note) ++{ ++ int offset; ++ unsigned int size; ++ ++ switch (note->descsz) ++ { ++ default: ++ return FALSE; ++ ++ case 228: /* Linux/MicroBlaze */ ++ /* pr_cursig */ ++ elf_tdata (abfd)->core->signal = bfd_get_16 (abfd, note->descdata + 12); ++ ++ /* pr_pid */ ++ elf_tdata (abfd)->core->pid = bfd_get_32 (abfd, note->descdata + 24); ++ ++ /* pr_reg */ ++ offset = 72; ++ size = 50 * 4; ++ ++ break; ++ } ++ ++ /* Make a ".reg/999" section. */ ++ return _bfd_elfcore_make_pseudosection (abfd, ".reg", ++ size, note->descpos + offset); ++} ++ ++static bfd_boolean ++microblaze_elf_grok_psinfo (bfd *abfd, Elf_Internal_Note *note) ++{ ++ switch (note->descsz) ++ { ++ default: ++ return FALSE; ++ ++ case 128: /* Linux/MicroBlaze elf_prpsinfo */ ++ elf_tdata (abfd)->core->program ++ = _bfd_elfcore_strndup (abfd, note->descdata + 32, 16); ++ elf_tdata (abfd)->core->command ++ = _bfd_elfcore_strndup (abfd, note->descdata + 48, 80); ++ } ++ ++ /* Note that for some reason, a spurious space is tacked ++ onto the end of the args in some (at least one anyway) ++ implementations, so strip it off if it exists. */ ++ ++ { ++ char *command = elf_tdata (abfd)->core->command; ++ int n = strlen (command); ++ ++ if (0 < n && command[n - 1] == ' ') ++ command[n - 1] = '\0'; ++ } ++ ++ return TRUE; ++} ++ + /* The microblaze linker (like many others) needs to keep track of + the number of relocs that it decides to copy as dynamic relocs in + check_relocs for each symbol. This is so that it can later discard +@@ -1023,7 +1101,7 @@ microblaze_elf_relocate_section (bfd *ou + { + /* External symbol. */ + bfd_boolean warned ATTRIBUTE_UNUSED; +- bfd_boolean ignored ATTRIBUTE_UNUSED; ++ bfd_boolean ignored; + + RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel, + r_symndx, symtab_hdr, sym_hashes, +@@ -1852,14 +1930,22 @@ microblaze_elf_relax_section (bfd *abfd, + } + break; + case R_MICROBLAZE_NONE: ++ case R_MICROBLAZE_32_NONE: + { + /* This was a PC-relative instruction that was + completely resolved. */ + int sfix, efix; ++ unsigned int val; + bfd_vma target_address; + target_address = irel->r_addend + irel->r_offset; + sfix = calc_fixup (irel->r_offset, 0, sec); + efix = calc_fixup (target_address, 0, sec); ++ ++ /* Validate the in-band val. */ ++ val = bfd_get_32 (abfd, contents + irel->r_offset); ++ if (val != irel->r_addend && ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) { ++ fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend); ++ } + irel->r_addend -= (efix - sfix); + /* Should use HOWTO. */ + microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset, +@@ -1907,6 +1993,49 @@ microblaze_elf_relax_section (bfd *abfd, + irelscanend = irelocs + o->reloc_count; + for (irelscan = irelocs; irelscan < irelscanend; irelscan++) + { ++ if (1 && ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE) ++ { ++ unsigned int val; ++ ++ isym = isymbuf + ELF32_R_SYM (irelscan->r_info); ++ ++ /* hax: We only do the following fixup for debug location lists. */ ++ if (strcmp(".debug_loc", o->name)) ++ continue; ++ ++ /* This was a PC-relative instruction that was completely resolved. */ ++ if (ocontents == NULL) ++ { ++ if (elf_section_data (o)->this_hdr.contents != NULL) ++ ocontents = elf_section_data (o)->this_hdr.contents; ++ else ++ { ++ /* We always cache the section contents. ++ Perhaps, if info->keep_memory is FALSE, we ++ should free them, if we are permitted to. */ ++ ++ if (o->rawsize == 0) ++ o->rawsize = o->size; ++ ocontents = (bfd_byte *) bfd_malloc (o->rawsize); ++ if (ocontents == NULL) ++ goto error_return; ++ if (!bfd_get_section_contents (abfd, o, ocontents, ++ (file_ptr) 0, ++ o->rawsize)) ++ goto error_return; ++ elf_section_data (o)->this_hdr.contents = ocontents; ++ } ++ } ++ ++ val = bfd_get_32 (abfd, ocontents + irelscan->r_offset); ++ if (val != irelscan->r_addend) { ++ fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, irelscan->r_addend); ++ } ++ ++ irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec); ++ microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset, ++ irelscan->r_addend); ++ } + if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32) + { + isym = isymbuf + ELF32_R_SYM (irelscan->r_info); +@@ -1966,7 +2095,7 @@ microblaze_elf_relax_section (bfd *abfd, + elf_section_data (o)->this_hdr.contents = ocontents; + } + } +- irelscan->r_addend -= calc_fixup (irel->r_addend ++ irelscan->r_addend -= calc_fixup (irelscan->r_addend + + isym->st_value, + 0, + sec); +@@ -3506,4 +3635,7 @@ microblaze_elf_add_symbol_hook (bfd *abf + #define elf_backend_size_dynamic_sections microblaze_elf_size_dynamic_sections + #define elf_backend_add_symbol_hook microblaze_elf_add_symbol_hook + ++#define elf_backend_grok_prstatus microblaze_elf_grok_prstatus ++#define elf_backend_grok_psinfo microblaze_elf_grok_psinfo ++ + #include "elf32-target.h" diff --git a/package/gdb-microblaze/patches/patch-bfd_libbfd_h b/package/gdb-microblaze/patches/patch-bfd_libbfd_h new file mode 100644 index 000000000..c9561d17f --- /dev/null +++ b/package/gdb-microblaze/patches/patch-bfd_libbfd_h @@ -0,0 +1,10 @@ +--- gdb-7.8.2.orig/bfd/libbfd.h 2015-01-15 11:58:11.000000000 +0100 ++++ gdb-7.8.2/bfd/libbfd.h 2016-09-21 10:34:30.025222164 +0200 +@@ -2644,6 +2644,7 @@ static const char *const bfd_reloc_code_ + "BFD_RELOC_MICROBLAZE_32_ROSDA", + "BFD_RELOC_MICROBLAZE_32_RWSDA", + "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM", ++ "BFD_RELOC_MICROBLAZE_32_NONE", + "BFD_RELOC_MICROBLAZE_64_NONE", + "BFD_RELOC_MICROBLAZE_64_GOTPC", + "BFD_RELOC_MICROBLAZE_64_GOT", diff --git a/package/gdb-microblaze/patches/patch-gdb_Makefile_in b/package/gdb-microblaze/patches/patch-gdb_Makefile_in new file mode 100644 index 000000000..e26423b6a --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_Makefile_in @@ -0,0 +1,20 @@ +--- gdb-7.8.2.orig/gdb/Makefile.in 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/Makefile.in 2016-09-21 10:34:30.029222319 +0200 +@@ -912,7 +912,7 @@ top.h bsd-kvm.h gdb-stabs.h reggroups.h + annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \ + remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \ + sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \ +-gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \ ++gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h microblaze-linux-tdep.h \ + psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \ + amd64-darwin-tdep.h charset-list.h \ + config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \ +@@ -1639,7 +1639,7 @@ ALLDEPFILES = \ + m68kbsd-nat.c m68kbsd-tdep.c \ + m68klinux-nat.c m68klinux-tdep.c \ + m88k-tdep.c m88kbsd-nat.c \ +- microblaze-tdep.c microblaze-linux-tdep.c \ ++ microblaze-tdep.c microblaze-linux-nat.c microblaze-linux-tdep.c \ + mingw-hdep.c \ + mips-linux-nat.c mips-linux-tdep.c \ + mips-irix-tdep.c \ diff --git a/package/gdb-microblaze/patches/patch-gdb_common_linux-ptrace_h b/package/gdb-microblaze/patches/patch-gdb_common_linux-ptrace_h index 51e2c3637..247f1ac60 100644 --- a/package/gdb-microblaze/patches/patch-gdb_common_linux-ptrace_h +++ b/package/gdb-microblaze/patches/patch-gdb_common_linux-ptrace_h @@ -1,7 +1,7 @@ * added from https://github.com/rofl0r/sabotage ---- gdb-7.6.orig/gdb/common/linux-ptrace.h 2013-01-01 07:32:54.000000000 +0100 -+++ gdb-7.6/gdb/common/linux-ptrace.h 2013-08-13 17:10:13.000000000 +0200 +--- gdb-7.8.2.orig/gdb/common/linux-ptrace.h 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/common/linux-ptrace.h 2016-09-21 10:34:30.005221389 +0200 @@ -20,6 +20,7 @@ struct buffer; @@ -9,4 +9,4 @@ +#include #include - #ifndef PTRACE_GETSIGINFO + #ifdef __UCLIBC__ diff --git a/package/gdb-microblaze/patches/patch-gdb_common_signals_c b/package/gdb-microblaze/patches/patch-gdb_common_signals_c index 114f5b867..a0ef838b9 100644 --- a/package/gdb-microblaze/patches/patch-gdb_common_signals_c +++ b/package/gdb-microblaze/patches/patch-gdb_common_signals_c @@ -1,8 +1,8 @@ * added from https://github.com/rofl0r/sabotage ---- gdb-7.5.orig/gdb/common/signals.c 2012-05-24 18:51:37.000000000 +0200 -+++ gdb-7.5/gdb/common/signals.c 2012-10-01 14:44:23.000000000 +0200 -@@ -346,6 +346,8 @@ gdb_signal_from_host (int hostsig) +--- gdb-7.8.2.orig/gdb/common/signals.c 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/common/signals.c 2016-09-21 10:34:30.009221544 +0200 +@@ -350,6 +350,8 @@ gdb_signal_from_host (int hostsig) else if (64 <= hostsig && hostsig <= 127) return (enum gdb_signal) (hostsig - 64 + (int) GDB_SIGNAL_REALTIME_64); diff --git a/package/gdb-microblaze/patches/patch-gdb_config_microblaze_linux_mh b/package/gdb-microblaze/patches/patch-gdb_config_microblaze_linux_mh new file mode 100644 index 000000000..95cd81e35 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_config_microblaze_linux_mh @@ -0,0 +1,13 @@ +--- gdb-7.8.2.orig/gdb/config/microblaze/linux.mh 1970-01-01 00:00:00.000000000 +0100 ++++ gdb-7.8.2/gdb/config/microblaze/linux.mh 2016-09-21 10:34:30.025222164 +0200 +@@ -0,0 +1,10 @@ ++# Host: Microblaze, running Linux ++ ++NAT_FILE= config/nm-linux.h ++NATDEPFILES= inf-ptrace.o fork-child.o \ ++ microblaze-linux-nat.o proc-service.o linux-thread-db.o \ ++ linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \ ++ linux-waitpid.o ++NAT_CDEPS = $(srcdir)/proc-service.list ++ ++LOADLIBES = -ldl $(RDYNAMIC) diff --git a/package/gdb-microblaze/patches/patch-gdb_configure_host b/package/gdb-microblaze/patches/patch-gdb_configure_host new file mode 100644 index 000000000..fc5193794 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_configure_host @@ -0,0 +1,19 @@ +--- gdb-7.8.2.orig/gdb/configure.host 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/configure.host 2016-09-21 10:34:30.025222164 +0200 +@@ -59,6 +59,7 @@ i[34567]86*) gdb_host_cpu=i386 ;; + m68*) gdb_host_cpu=m68k ;; + m88*) gdb_host_cpu=m88k ;; + mips*) gdb_host_cpu=mips ;; ++microblaze*) gdb_host_cpu=microblaze ;; + powerpc* | rs6000) gdb_host_cpu=powerpc ;; + sparcv9 | sparc64) gdb_host_cpu=sparc ;; + s390*) gdb_host_cpu=s390 ;; +@@ -133,6 +134,8 @@ mips*-*-netbsd* | mips*-*-knetbsd*-gnu) + gdb_host=nbsd ;; + mips64*-*-openbsd*) gdb_host=obsd64 ;; + ++microblaze*-*linux*) gdb_host=linux ;; ++ + powerpc-*-aix* | rs6000-*-* | powerpc64-*-aix*) + gdb_host=aix ;; + powerpc*-*-freebsd*) gdb_host=fbsd ;; diff --git a/package/gdb-microblaze/patches/patch-gdb_configure_tgt b/package/gdb-microblaze/patches/patch-gdb_configure_tgt new file mode 100644 index 000000000..f5ebb27b9 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_configure_tgt @@ -0,0 +1,14 @@ +--- gdb-7.8.2.orig/gdb/configure.tgt 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/configure.tgt 2016-09-21 10:34:30.025222164 +0200 +@@ -340,9 +340,10 @@ mep-*-*) + + microblaze*-linux-*|microblaze*-*-linux*) + # Target: Xilinx MicroBlaze running Linux +- gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o microblaze-rom.o \ ++ gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o microblaze-rom.o glibc-tdep.o \ + monitor.o dsrec.o solib-svr4.o symfile-mem.o linux-tdep.o" + gdb_sim=../sim/microblaze/libsim.a ++ build_gdbserver=yes + ;; + microblaze*-*-*) + # Target: Xilinx MicroBlaze running standalone diff --git a/package/gdb-microblaze/patches/patch-gdb_debugreg_h b/package/gdb-microblaze/patches/patch-gdb_debugreg_h new file mode 100644 index 000000000..8800f7c67 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_debugreg_h @@ -0,0 +1,51 @@ +--- gdb-7.8.2.orig/gdb/debugreg.h 1970-01-01 00:00:00.000000000 +0100 ++++ gdb-7.8.2/gdb/debugreg.h 2016-09-20 19:56:32.003878822 +0200 +@@ -0,0 +1,48 @@ ++#ifndef SYS_DEBUGREG_H ++#define SYS_DEBUGREG_H ++ ++#include ++ ++#define DR_FIRSTADDR 0 ++#define DR_LASTADDR 3 ++ ++#define DR_STATUS 6 ++#define DR_CONTROL 7 ++ ++#define DR_TRAP0 (0x1) ++#define DR_TRAP1 (0x2) ++#define DR_TRAP2 (0x4) ++#define DR_TRAP3 (0x8) ++ ++#define DR_STEP (0x4000) ++#define DR_SWITCH (0x8000) ++ ++#define DR_CONTROL_SHIFT 16 ++#define DR_CONTROL_SIZE 4 ++ ++#define DR_RW_EXECUTE (0x0) ++#define DR_RW_WRITE (0x1) ++#define DR_RW_READ (0x3) ++ ++#define DR_LEN_1 (0x0) ++#define DR_LEN_2 (0x4) ++#define DR_LEN_4 (0xC) ++#define DR_LEN_8 (0x8) ++ ++#define DR_LOCAL_ENABLE_SHIFT 0 ++#define DR_GLOBAL_ENABLE_SHIFT 1 ++#define DR_ENABLE_SIZE 2 ++ ++#define DR_LOCAL_ENABLE_MASK (0x55) ++#define DR_GLOBAL_ENABLE_MASK (0xAA) ++ ++ ++#if SIZE_MAX > 4294967295 ++# define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) ++#else ++# define DR_CONTROL_RESERVED (0x00FC00U) ++#endif ++#define DR_LOCAL_SLOWDOWN (0x100) ++#define DR_GLOBAL_SLOWDOWN (0x200) ++ ++#endif diff --git a/package/gdb-microblaze/patches/patch-gdb_gdbserver_Makefile_in b/package/gdb-microblaze/patches/patch-gdb_gdbserver_Makefile_in new file mode 100644 index 000000000..7d1313386 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_gdbserver_Makefile_in @@ -0,0 +1,27 @@ +--- gdb-7.8.2.orig/gdb/gdbserver/Makefile.in 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/gdbserver/Makefile.in 2016-09-21 10:34:30.025222164 +0200 +@@ -148,6 +148,7 @@ SFILES= $(srcdir)/gdbreplay.c $(srcdir)/ + $(srcdir)/linux-ia64-low.c $(srcdir)/linux-low.c \ + $(srcdir)/linux-m32r-low.c \ + $(srcdir)/linux-m68k-low.c $(srcdir)/linux-mips-low.c \ ++ $(srcdir)/linux-microblaze-low.c \ + $(srcdir)/linux-nios2-low.c \ + $(srcdir)/linux-ppc-low.c \ + $(srcdir)/linux-s390-low.c \ +@@ -329,6 +330,7 @@ clean: + rm -f arm-with-iwmmxt.c + rm -f arm-with-vfpv2.c arm-with-vfpv3.c arm-with-neon.c + rm -f mips-linux.c mips64-linux.c ++ rm -f microblaze-linux.c + rm -f nios2-linux.c + rm -f powerpc-32.c powerpc-32l.c powerpc-64l.c powerpc-e500l.c + rm -f powerpc-altivec32l.c powerpc-cell32l.c powerpc-vsx32l.c +@@ -620,6 +622,8 @@ mips64-linux.c : $(srcdir)/../regformats + $(SHELL) $(regdat_sh) $(srcdir)/../regformats/mips64-linux.dat mips64-linux.c + mips64-dsp-linux.c : $(srcdir)/../regformats/mips64-dsp-linux.dat $(regdat_sh) + $(SHELL) $(regdat_sh) $(srcdir)/../regformats/mips64-dsp-linux.dat mips64-dsp-linux.c ++microblaze-linux.c : $(srcdir)/../regformats/reg-microblaze.dat $(regdat_sh) ++ $(SHELL) $(regdat_sh) $(srcdir)/../regformats/reg-microblaze.dat microblaze-linux.c + nios2-linux.c : $(srcdir)/../regformats/nios2-linux.dat $(regdat_sh) + $(SHELL) $(regdat_sh) $(srcdir)/../regformats/nios2-linux.dat nios2-linux.c + powerpc-32.c : $(srcdir)/../regformats/rs6000/powerpc-32.dat $(regdat_sh) diff --git a/package/gdb-microblaze/patches/patch-gdb_gdbserver_configure b/package/gdb-microblaze/patches/patch-gdb_gdbserver_configure index fb32187b2..fed862c6b 100644 --- a/package/gdb-microblaze/patches/patch-gdb_gdbserver_configure +++ b/package/gdb-microblaze/patches/patch-gdb_gdbserver_configure @@ -1,6 +1,6 @@ ---- gdb-7.6.orig/gdb/gdbserver/configure 2013-03-11 09:35:09.000000000 +0100 -+++ gdb-7.6/gdb/gdbserver/configure 2013-12-23 19:39:06.000000000 +0100 -@@ -4927,9 +4927,6 @@ if test "${GCC}" = yes -a -z "${ERROR_ON +--- gdb-7.8.2.orig/gdb/gdbserver/configure 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/gdbserver/configure 2016-09-21 10:34:30.013221699 +0200 +@@ -5250,9 +5250,6 @@ if test "${GCC}" = yes -a -z "${ERROR_ON fi WERROR_CFLAGS="" @@ -10,7 +10,7 @@ build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \ -Wformat-nonliteral -Wno-char-subscripts -Wempty-body" -@@ -4943,7 +4940,6 @@ $as_echo_n "checking compiler warning fl +@@ -5266,7 +5263,6 @@ $as_echo_n "checking compiler warning fl # compiled with it enabled. for w in ${build_warnings}; do case $w in diff --git a/package/gdb-microblaze/patches/patch-gdb_gdbserver_configure_srv b/package/gdb-microblaze/patches/patch-gdb_gdbserver_configure_srv new file mode 100644 index 000000000..409bf5d75 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_gdbserver_configure_srv @@ -0,0 +1,16 @@ +--- gdb-7.8.2.orig/gdb/gdbserver/configure.srv 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/gdbserver/configure.srv 2016-09-21 10:34:30.025222164 +0200 +@@ -198,6 +198,13 @@ case "${target}" in + srv_linux_usrregs=yes + srv_linux_thread_db=yes + ;; ++ microblaze*-*-linux*) srv_regobj=microblaze-linux.o ++ srv_tgtobj="$srv_linux_obj linux-microblaze-low.o" ++ srv_linux_usrregs=yes ++ srv_linux_regsets=yes ++ srv_linux_thread_db=yes ++ ;; ++ + nios2*-*-linux*) srv_regobj="nios2-linux.o" + srv_tgtobj="$srv_linux_obj linux-nios2-low.o" + srv_xmlfiles="nios2-linux.xml" diff --git a/package/gdb-microblaze/patches/patch-gdb_gdbserver_linux-microblaze-low_c b/package/gdb-microblaze/patches/patch-gdb_gdbserver_linux-microblaze-low_c new file mode 100644 index 000000000..01e3e5940 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_gdbserver_linux-microblaze-low_c @@ -0,0 +1,232 @@ +--- gdb-7.8.2.orig/gdb/gdbserver/linux-microblaze-low.c 1970-01-01 00:00:00.000000000 +0100 ++++ gdb-7.8.2/gdb/gdbserver/linux-microblaze-low.c 2016-09-21 10:34:30.025222164 +0200 +@@ -0,0 +1,228 @@ ++/* GNU/Linux/Microblaze specific low level interface, for the remote server for ++ GDB. ++ Copyright (C) 1995-2013 Free Software Foundation, Inc. ++ ++ This file is part of GDB. ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 3 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program. If not, see . */ ++ ++#include "server.h" ++#include "linux-low.h" ++ ++#include ++#include ++#include ++ ++#include "gdb_proc_service.h" ++ ++static int microblaze_regmap[] = ++ {PT_GPR(0), PT_GPR(1), PT_GPR(2), PT_GPR(3), ++ PT_GPR(4), PT_GPR(5), PT_GPR(6), PT_GPR(7), ++ PT_GPR(8), PT_GPR(9), PT_GPR(10), PT_GPR(11), ++ PT_GPR(12), PT_GPR(13), PT_GPR(14), PT_GPR(15), ++ PT_GPR(16), PT_GPR(17), PT_GPR(18), PT_GPR(19), ++ PT_GPR(20), PT_GPR(21), PT_GPR(22), PT_GPR(23), ++ PT_GPR(24), PT_GPR(25), PT_GPR(26), PT_GPR(27), ++ PT_GPR(28), PT_GPR(29), PT_GPR(30), PT_GPR(31), ++ PT_PC, PT_MSR, PT_EAR, PT_ESR, ++ PT_FSR ++ }; ++ ++#define microblaze_num_regs (sizeof microblaze_regmap / sizeof microblaze_regmap[0]) ++ ++/* Defined in auto-generated file microblaze-linux.c. */ ++void init_registers_microblaze (void); ++extern const struct target_desc *tdesc_microblaze; ++ ++static int ++microblaze_cannot_store_register (int regno) ++{ ++ if (microblaze_regmap[regno] == -1 || regno == 0) ++ return 1; ++ ++ return 0; ++} ++ ++static int ++microblaze_cannot_fetch_register (int regno) ++{ ++ return 0; ++} ++ ++static CORE_ADDR ++microblaze_get_pc (struct regcache *regcache) ++{ ++ unsigned long pc; ++ ++ collect_register_by_name (regcache, "pc", &pc); ++ return (CORE_ADDR) pc; ++} ++ ++static void ++microblaze_set_pc (struct regcache *regcache, CORE_ADDR pc) ++{ ++ unsigned long newpc = pc; ++ ++ supply_register_by_name (regcache, "pc", &newpc); ++} ++ ++/* dbtrap insn */ ++/* brki r16, 0x18; */ ++static const unsigned long microblaze_breakpoint = 0xba0c0018; ++#define microblaze_breakpoint_len 4 ++ ++static int ++microblaze_breakpoint_at (CORE_ADDR where) ++{ ++ unsigned long insn; ++ ++ (*the_target->read_memory) (where, (unsigned char *) &insn, 4); ++ if (insn == microblaze_breakpoint) ++ return 1; ++ /* If necessary, recognize more trap instructions here. GDB only uses the ++ one. */ ++ return 0; ++} ++ ++static CORE_ADDR ++microblaze_reinsert_addr (struct regcache *regcache) ++{ ++ unsigned long pc; ++ collect_register_by_name (regcache, "r15", &pc); ++ return pc; ++} ++ ++#ifdef HAVE_PTRACE_GETREGS ++ ++static void ++microblaze_collect_ptrace_register (struct regcache *regcache, int regno, char *buf) ++{ ++ int size = register_size (regcache->tdesc, regno); ++ ++ memset (buf, 0, sizeof (long)); ++ ++ if (size < sizeof (long)) ++ collect_register (regcache, regno, buf + sizeof (long) - size); ++ else ++ collect_register (regcache, regno, buf); ++} ++ ++static void ++microblaze_supply_ptrace_register (struct regcache *regcache, ++ int regno, const char *buf) ++{ ++ int size = register_size (regcache->tdesc, regno); ++ ++ if (regno == 0) { ++ unsigned long regbuf_0 = 0; ++ /* clobbering r0 so that it is always 0 as enforced by hardware */ ++ supply_register (regcache, regno, (const char*)®buf_0); ++ } else { ++ if (size < sizeof (long)) ++ supply_register (regcache, regno, buf + sizeof (long) - size); ++ else ++ supply_register (regcache, regno, buf); ++ } ++} ++ ++/* Provide only a fill function for the general register set. ps_lgetregs ++ will use this for NPTL support. */ ++ ++static void microblaze_fill_gregset (struct regcache *regcache, void *buf) ++{ ++ int i; ++ ++ for (i = 0; i < 32; i++) ++ microblaze_collect_ptrace_register (regcache, i, (char *) buf + microblaze_regmap[i]); ++} ++ ++static void ++microblaze_store_gregset (struct regcache *regcache, const void *buf) ++{ ++ int i; ++ ++ for (i = 0; i < 32; i++) ++ supply_register (regcache, i, (char *) buf + microblaze_regmap[i]); ++} ++ ++#endif /* HAVE_PTRACE_GETREGS */ ++ ++static struct regset_info microblaze_regsets[] = { ++#ifdef HAVE_PTRACE_GETREGS ++ { PTRACE_GETREGS, PTRACE_SETREGS, 0, sizeof (elf_gregset_t), GENERAL_REGS, microblaze_fill_gregset, microblaze_store_gregset }, ++ { 0, 0, 0, -1, -1, NULL, NULL }, ++#endif /* HAVE_PTRACE_GETREGS */ ++ { 0, 0, 0, -1, -1, NULL, NULL } ++}; ++ ++static struct regsets_info microblaze_regsets_info = ++ { ++ microblaze_regsets, /* regsets */ ++ 0, /* num_regsets */ ++ NULL, /* disabled_regsets */ ++ }; ++ ++static struct usrregs_info microblaze_usrregs_info = ++ { ++ microblaze_num_regs, ++ microblaze_regmap, ++ }; ++ ++static struct regs_info regs_info = ++ { ++ NULL, /* regset_bitmap */ ++ µblaze_usrregs_info, ++ µblaze_regsets_info ++ }; ++ ++static const struct regs_info * ++microblaze_regs_info (void) ++{ ++ return ®s_info; ++} ++ ++static void ++microblaze_arch_setup (void) ++{ ++ current_process ()->tdesc = tdesc_microblaze; ++} ++ ++struct linux_target_ops the_low_target = { ++ microblaze_arch_setup, ++ microblaze_regs_info, ++ microblaze_cannot_fetch_register, ++ microblaze_cannot_store_register, ++ NULL, /* fetch_register */ ++ microblaze_get_pc, ++ microblaze_set_pc, ++ (const unsigned char *) µblaze_breakpoint, ++ microblaze_breakpoint_len, ++ microblaze_reinsert_addr, ++ 0, ++ microblaze_breakpoint_at, ++ NULL, ++ NULL, ++ NULL, ++ NULL, ++ microblaze_collect_ptrace_register, ++ microblaze_supply_ptrace_register, ++}; ++ ++void ++initialize_low_arch (void) ++{ ++ init_registers_microblaze (); ++ ++ initialize_regsets_info (µblaze_regsets_info); ++} +\ No newline at end of file diff --git a/package/gdb-microblaze/patches/patch-gdb_linux-nat_c b/package/gdb-microblaze/patches/patch-gdb_linux-nat_c index 9ba7254ca..678664495 100644 --- a/package/gdb-microblaze/patches/patch-gdb_linux-nat_c +++ b/package/gdb-microblaze/patches/patch-gdb_linux-nat_c @@ -1,8 +1,8 @@ * added from https://github.com/rofl0r/sabotage ---- gdb-7.6.orig/gdb/linux-nat.c 2013-02-13 15:59:49.000000000 +0100 -+++ gdb-7.6/gdb/linux-nat.c 2013-08-13 17:01:09.000000000 +0200 -@@ -79,6 +79,14 @@ +--- gdb-7.8.2.orig/gdb/linux-nat.c 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/linux-nat.c 2016-09-21 10:34:30.017221854 +0200 +@@ -81,6 +81,14 @@ # endif #endif /* HAVE_PERSONALITY */ @@ -17,7 +17,7 @@ /* This comment documents high-level logic of this file. Waiting for events in sync mode -@@ -2379,7 +2387,7 @@ linux_handle_extended_wait (struct lwp_i +@@ -2118,7 +2126,7 @@ linux_handle_extended_wait (struct lwp_i status = 0; } diff --git a/package/gdb-microblaze/patches/patch-gdb_microblaze-linux-nat_c b/package/gdb-microblaze/patches/patch-gdb_microblaze-linux-nat_c new file mode 100644 index 000000000..e362e9da7 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_microblaze-linux-nat_c @@ -0,0 +1,433 @@ +--- gdb-7.8.2.orig/gdb/microblaze-linux-nat.c 1970-01-01 00:00:00.000000000 +0100 ++++ gdb-7.8.2/gdb/microblaze-linux-nat.c 2016-09-21 10:34:30.029222319 +0200 +@@ -0,0 +1,430 @@ ++/* Microblaze GNU/Linux native support. ++ ++ Copyright (C) 1988-1989, 1991-1992, 1994, 1996, 2000-2012 Free ++ Software Foundation, Inc. ++ ++ This file is part of GDB. ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 3 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License ++ along with this program. If not, see . */ ++ ++#include "defs.h" ++#include "arch-utils.h" ++#include "dis-asm.h" ++#include "frame.h" ++#include "trad-frame.h" ++#include "symtab.h" ++#include "value.h" ++#include "gdbcmd.h" ++#include "breakpoint.h" ++#include "inferior.h" ++#include "regcache.h" ++#include "target.h" ++#include "frame.h" ++#include "frame-base.h" ++#include "frame-unwind.h" ++#include "dwarf2-frame.h" ++#include "osabi.h" ++ ++#include "gdb_assert.h" ++#include "target-descriptions.h" ++#include "opcodes/microblaze-opcm.h" ++#include "opcodes/microblaze-dis.h" ++ ++#include "linux-nat.h" ++#include "target-descriptions.h" ++ ++#include ++#include ++#include ++#include ++ ++/* Prototypes for supply_gregset etc. */ ++#include "gregset.h" ++ ++#include "microblaze-tdep.h" ++ ++#include ++#include "auxv.h" ++ ++/* Defines ps_err_e, struct ps_prochandle. */ ++#include "gdb_proc_service.h" ++ ++/* On GNU/Linux, threads are implemented as pseudo-processes, in which ++ case we may be tracing more than one process at a time. In that ++ case, inferior_ptid will contain the main process ID and the ++ individual thread (process) ID. get_thread_id () is used to get ++ the thread id if it's available, and the process id otherwise. */ ++ ++int ++get_thread_id (ptid_t ptid) ++{ ++ int tid = ptid_get_lwp (ptid); ++ if (0 == tid) ++ tid = ptid_get_pid (ptid); ++ return tid; ++} ++ ++#define GET_THREAD_ID(PTID) get_thread_id (PTID) ++ ++/* Non-zero if our kernel may support the PTRACE_GETREGS and ++ PTRACE_SETREGS requests, for reading and writing the ++ general-purpose registers. Zero if we've tried one of ++ them and gotten an error. */ ++int have_ptrace_getsetregs = 1; ++ ++static int ++microblaze_register_u_addr (struct gdbarch *gdbarch, int regno) ++{ ++ int u_addr = -1; ++ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); ++ /* NOTE: cagney/2003-11-25: This is the word size used by the ptrace ++ interface, and not the wordsize of the program's ABI. */ ++ int wordsize = sizeof (long); ++ ++ /* General purpose registers occupy 1 slot each in the buffer. */ ++ if (regno >= MICROBLAZE_R0_REGNUM ++ && regno <= MICROBLAZE_FSR_REGNUM) ++ u_addr = (regno * wordsize); ++ ++ return u_addr; ++} ++ ++ ++static void ++fetch_register (struct regcache *regcache, int tid, int regno) ++{ ++ struct gdbarch *gdbarch = get_regcache_arch (regcache); ++ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); ++ /* This isn't really an address. But ptrace thinks of it as one. */ ++ CORE_ADDR regaddr = microblaze_register_u_addr (gdbarch, regno); ++ int bytes_transferred; ++ unsigned int offset; /* Offset of registers within the u area. */ ++ char buf[MAX_REGISTER_SIZE]; ++ ++ if (regaddr == -1) ++ { ++ memset (buf, '\0', register_size (gdbarch, regno)); /* Supply zeroes */ ++ regcache_raw_supply (regcache, regno, buf); ++ return; ++ } ++ ++ /* Read the raw register using sizeof(long) sized chunks. On a ++ 32-bit platform, 64-bit floating-point registers will require two ++ transfers. */ ++ for (bytes_transferred = 0; ++ bytes_transferred < register_size (gdbarch, regno); ++ bytes_transferred += sizeof (long)) ++ { ++ long l; ++ ++ errno = 0; ++ l = ptrace (PTRACE_PEEKUSER, tid, (PTRACE_TYPE_ARG3) regaddr, 0); ++ regaddr += sizeof (long); ++ if (errno != 0) ++ { ++ char message[128]; ++ sprintf (message, "reading register %s (#%d)", ++ gdbarch_register_name (gdbarch, regno), regno); ++ perror_with_name (message); ++ } ++ memcpy (&buf[bytes_transferred], &l, sizeof (l)); ++ } ++ ++ /* Now supply the register. Keep in mind that the regcache's idea ++ of the register's size may not be a multiple of sizeof ++ (long). */ ++ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE) ++ { ++ /* Little-endian values are always found at the left end of the ++ bytes transferred. */ ++ regcache_raw_supply (regcache, regno, buf); ++ } ++ else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) ++ { ++ /* Big-endian values are found at the right end of the bytes ++ transferred. */ ++ size_t padding = (bytes_transferred - register_size (gdbarch, regno)); ++ regcache_raw_supply (regcache, regno, buf + padding); ++ } ++ else ++ internal_error (__FILE__, __LINE__, ++ _("fetch_register: unexpected byte order: %d"), ++ gdbarch_byte_order (gdbarch)); ++} ++ ++/* This function actually issues the request to ptrace, telling ++ it to get all general-purpose registers and put them into the ++ specified regset. ++ ++ If the ptrace request does not exist, this function returns 0 ++ and properly sets the have_ptrace_* flag. If the request fails, ++ this function calls perror_with_name. Otherwise, if the request ++ succeeds, then the regcache gets filled and 1 is returned. */ ++static int ++fetch_all_gp_regs (struct regcache *regcache, int tid) ++{ ++ struct gdbarch *gdbarch = get_regcache_arch (regcache); ++ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); ++ gdb_gregset_t gregset; ++ ++ if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0) ++ { ++ if (errno == EIO) ++ { ++ have_ptrace_getsetregs = 0; ++ return 0; ++ } ++ perror_with_name (_("Couldn't get general-purpose registers.")); ++ } ++ ++ supply_gregset (regcache, (const gdb_gregset_t *) &gregset); ++ ++ return 1; ++} ++ ++ ++/* This is a wrapper for the fetch_all_gp_regs function. It is ++ responsible for verifying if this target has the ptrace request ++ that can be used to fetch all general-purpose registers at one ++ shot. If it doesn't, then we should fetch them using the ++ old-fashioned way, which is to iterate over the registers and ++ request them one by one. */ ++static void ++fetch_gp_regs (struct regcache *regcache, int tid) ++{ ++ struct gdbarch *gdbarch = get_regcache_arch (regcache); ++ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); ++ int i; ++ ++ if (have_ptrace_getsetregs) ++ if (fetch_all_gp_regs (regcache, tid)) ++ return; ++ ++ /* If we've hit this point, it doesn't really matter which ++ architecture we are using. We just need to read the ++ registers in the "old-fashioned way". */ ++ for (i = MICROBLAZE_R0_REGNUM; i <= MICROBLAZE_FSR_REGNUM; i++) ++ fetch_register (regcache, tid, i); ++} ++ ++ ++static void ++store_register (const struct regcache *regcache, int tid, int regno) ++{ ++ struct gdbarch *gdbarch = get_regcache_arch (regcache); ++ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); ++ /* This isn't really an address. But ptrace thinks of it as one. */ ++ CORE_ADDR regaddr = microblaze_register_u_addr (gdbarch, regno); ++ int i; ++ size_t bytes_to_transfer; ++ char buf[MAX_REGISTER_SIZE]; ++ ++ if (regaddr == -1) ++ return; ++ ++ /* First collect the register. Keep in mind that the regcache's ++ idea of the register's size may not be a multiple of sizeof ++ (long). */ ++ memset (buf, 0, sizeof buf); ++ bytes_to_transfer = align_up (register_size (gdbarch, regno), sizeof (long)); ++ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE) ++ { ++ /* Little-endian values always sit at the left end of the buffer. */ ++ regcache_raw_collect (regcache, regno, buf); ++ } ++ else if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) ++ { ++ /* Big-endian values sit at the right end of the buffer. */ ++ size_t padding = (bytes_to_transfer - register_size (gdbarch, regno)); ++ regcache_raw_collect (regcache, regno, buf + padding); ++ } ++ ++ for (i = 0; i < bytes_to_transfer; i += sizeof (long)) ++ { ++ long l; ++ ++ memcpy (&l, &buf[i], sizeof (l)); ++ errno = 0; ++ ptrace (PTRACE_POKEUSER, tid, (PTRACE_TYPE_ARG3) regaddr, l); ++ regaddr += sizeof (long); ++ ++ if (errno != 0) ++ { ++ char message[128]; ++ sprintf (message, "writing register %s (#%d)", ++ gdbarch_register_name (gdbarch, regno), regno); ++ perror_with_name (message); ++ } ++ } ++} ++ ++/* This function actually issues the request to ptrace, telling ++ it to store all general-purpose registers present in the specified ++ regset. ++ ++ If the ptrace request does not exist, this function returns 0 ++ and properly sets the have_ptrace_* flag. If the request fails, ++ this function calls perror_with_name. Otherwise, if the request ++ succeeds, then the regcache is stored and 1 is returned. */ ++static int ++store_all_gp_regs (const struct regcache *regcache, int tid, int regno) ++{ ++ struct gdbarch *gdbarch = get_regcache_arch (regcache); ++ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); ++ gdb_gregset_t gregset; ++ ++ if (ptrace (PTRACE_GETREGS, tid, 0, (void *) &gregset) < 0) ++ { ++ if (errno == EIO) ++ { ++ have_ptrace_getsetregs = 0; ++ return 0; ++ } ++ perror_with_name (_("Couldn't get general-purpose registers.")); ++ } ++ ++ fill_gregset (regcache, &gregset, regno); ++ ++ if (ptrace (PTRACE_SETREGS, tid, 0, (void *) &gregset) < 0) ++ { ++ if (errno == EIO) ++ { ++ have_ptrace_getsetregs = 0; ++ return 0; ++ } ++ perror_with_name (_("Couldn't set general-purpose registers.")); ++ } ++ ++ return 1; ++} ++ ++/* This is a wrapper for the store_all_gp_regs function. It is ++ responsible for verifying if this target has the ptrace request ++ that can be used to store all general-purpose registers at one ++ shot. If it doesn't, then we should store them using the ++ old-fashioned way, which is to iterate over the registers and ++ store them one by one. */ ++static void ++store_gp_regs (const struct regcache *regcache, int tid, int regno) ++{ ++ struct gdbarch *gdbarch = get_regcache_arch (regcache); ++ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); ++ int i; ++ ++ if (have_ptrace_getsetregs) ++ if (store_all_gp_regs (regcache, tid, regno)) ++ return; ++ ++ /* If we hit this point, it doesn't really matter which ++ architecture we are using. We just need to store the ++ registers in the "old-fashioned way". */ ++ for (i = MICROBLAZE_R0_REGNUM; i <= MICROBLAZE_FSR_REGNUM; i++) ++ store_register (regcache, tid, i); ++} ++ ++ ++/* Fetch registers from the child process. Fetch all registers if ++ regno == -1, otherwise fetch all general registers or all floating ++ point registers depending upon the value of regno. */ ++ ++static void ++microblaze_linux_fetch_inferior_registers (struct target_ops *ops, ++ struct regcache *regcache, int regno) ++{ ++ /* Get the thread id for the ptrace call. */ ++ int tid = GET_THREAD_ID (inferior_ptid); ++ ++ if (regno == -1) ++ fetch_gp_regs (regcache, tid); ++ else ++ fetch_register (regcache, tid, regno); ++} ++ ++/* Store registers back into the inferior. Store all registers if ++ regno == -1, otherwise store all general registers or all floating ++ point registers depending upon the value of regno. */ ++ ++static void ++microblaze_linux_store_inferior_registers (struct target_ops *ops, ++ struct regcache *regcache, int regno) ++{ ++ /* Get the thread id for the ptrace call. */ ++ int tid = GET_THREAD_ID (inferior_ptid); ++ ++ if (regno >= 0) ++ store_register (regcache, tid, regno); ++ else ++ store_gp_regs (regcache, tid, -1); ++} ++ ++/* Wrapper functions for the standard regset handling, used by ++ thread debugging. */ ++ ++void ++fill_gregset (const struct regcache *regcache, ++ gdb_gregset_t *gregsetp, int regno) ++{ ++ microblaze_collect_gregset (NULL, regcache, regno, gregsetp); ++} ++ ++void ++supply_gregset (struct regcache *regcache, const gdb_gregset_t *gregsetp) ++{ ++ microblaze_supply_gregset (NULL, regcache, -1, gregsetp); ++} ++ ++void ++fill_fpregset (const struct regcache *regcache, ++ gdb_fpregset_t *fpregsetp, int regno) ++{ ++ /* FIXME. */ ++} ++ ++void ++supply_fpregset (struct regcache *regcache, const gdb_fpregset_t *fpregsetp) ++{ ++ /* FIXME. */ ++} ++ ++static const struct target_desc * ++microblaze_linux_read_description (struct target_ops *ops) ++{ ++ CORE_ADDR microblaze_hwcap = 0; ++ ++ if (target_auxv_search (ops, AT_HWCAP, µblaze_hwcap) != 1) ++ return NULL; ++ ++ return NULL; ++} ++ ++ ++void _initialize_microblaze_linux_nat (void); ++ ++void ++_initialize_microblaze_linux_nat (void) ++{ ++ struct target_ops *t; ++ ++ /* Fill in the generic GNU/Linux methods. */ ++ t = linux_target (); ++ ++ /* Add our register access methods. */ ++ t->to_fetch_registers = microblaze_linux_fetch_inferior_registers; ++ t->to_store_registers = microblaze_linux_store_inferior_registers; ++ ++ t->to_read_description = microblaze_linux_read_description; ++ ++ /* Register the target. */ ++ linux_nat_add_target (t); ++} diff --git a/package/gdb-microblaze/patches/patch-gdb_microblaze-linux-tdep_c b/package/gdb-microblaze/patches/patch-gdb_microblaze-linux-tdep_c new file mode 100644 index 000000000..74c125af6 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_microblaze-linux-tdep_c @@ -0,0 +1,155 @@ +--- gdb-7.8.2.orig/gdb/microblaze-linux-tdep.c 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/microblaze-linux-tdep.c 2016-09-21 10:34:30.029222319 +0200 +@@ -1,6 +1,6 @@ + /* Target-dependent code for Xilinx MicroBlaze. + +- Copyright (C) 2009-2014 Free Software Foundation, Inc. ++ Copyright (C) 2009-2013 Free Software Foundation, Inc. + + This file is part of GDB. + +@@ -32,11 +32,28 @@ + #include "regset.h" + #include "solib-svr4.h" + #include "microblaze-tdep.h" ++#include "glibc-tdep.h" + #include "trad-frame.h" + #include "frame-unwind.h" + #include "tramp-frame.h" + #include "linux-tdep.h" + ++static int microblaze_debug_flag = 0; ++ ++static void ++microblaze_debug (const char *fmt, ...) ++{ ++ if (microblaze_debug_flag) ++ { ++ va_list args; ++ ++ va_start (args, fmt); ++ printf_unfiltered ("MICROBLAZE LINUX: "); ++ vprintf_unfiltered (fmt, args); ++ va_end (args); ++ } ++} ++ + static int + microblaze_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, + struct bp_target_info *bp_tgt) +@@ -46,20 +63,27 @@ microblaze_linux_memory_remove_breakpoin + int val; + int bplen; + gdb_byte old_contents[BREAKPOINT_MAX]; ++ struct cleanup *cleanup; + + /* Determine appropriate breakpoint contents and size for this address. */ + bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen); + if (bp == NULL) + error (_("Software breakpoints not implemented for this target.")); + ++ /* Make sure we see the memory breakpoints. */ ++ cleanup = make_show_memory_breakpoints_cleanup (1); + val = target_read_memory (addr, old_contents, bplen); + + /* If our breakpoint is no longer at the address, this means that the + program modified the code on us, so it is wrong to put back the + old value. */ + if (val == 0 && memcmp (bp, old_contents, bplen) == 0) +- val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen); ++ { ++ val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen); ++ microblaze_debug ("microblaze_linux_memory_remove_breakpoint writing back to memory at addr 0x%lx\n", addr); ++ } + ++ do_cleanups (cleanup); + return val; + } + +@@ -116,6 +140,50 @@ static struct tramp_frame microblaze_lin + microblaze_linux_sighandler_cache_init + }; + ++const struct microblaze_gregset microblaze_linux_core_gregset; ++ ++static void ++microblaze_linux_supply_core_gregset (const struct regset *regset, ++ struct regcache *regcache, ++ int regnum, const void *gregs, size_t len) ++{ ++ microblaze_supply_gregset (µblaze_linux_core_gregset, regcache, ++ regnum, gregs); ++} ++ ++static void ++microblaze_linux_collect_core_gregset (const struct regset *regset, ++ const struct regcache *regcache, ++ int regnum, void *gregs, size_t len) ++{ ++ microblaze_collect_gregset (µblaze_linux_core_gregset, regcache, ++ regnum, gregs); ++} ++ ++static void ++microblaze_linux_supply_core_fpregset (const struct regset *regset, ++ struct regcache *regcache, ++ int regnum, const void *fpregs, size_t len) ++{ ++ /* FIXME. */ ++ microblaze_supply_fpregset (regcache, regnum, fpregs); ++} ++ ++static void ++microblaze_linux_collect_core_fpregset (const struct regset *regset, ++ const struct regcache *regcache, ++ int regnum, void *fpregs, size_t len) ++{ ++ /* FIXME. */ ++ microblaze_collect_fpregset (regcache, regnum, fpregs); ++} ++ ++static const struct regset microblaze_linux_gregset = ++{ ++ NULL, ++ microblaze_linux_supply_core_gregset, ++ microblaze_linux_collect_core_gregset ++}; + + static void + microblaze_linux_init_abi (struct gdbarch_info info, +@@ -123,6 +191,9 @@ microblaze_linux_init_abi (struct gdbarc + { + struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); + ++ tdep->gregset = µblaze_linux_gregset; ++ tdep->sizeof_gregset = 200; ++ + linux_init_abi (info, gdbarch); + + set_gdbarch_memory_remove_breakpoint (gdbarch, +@@ -135,6 +206,25 @@ microblaze_linux_init_abi (struct gdbarc + /* Trampolines. */ + tramp_frame_prepend_unwinder (gdbarch, + µblaze_linux_sighandler_tramp_frame); ++ ++ /* BFD target for core files. */ ++ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) ++ set_gdbarch_gcore_bfd_target (gdbarch, "elf32-microblaze"); ++ else ++ set_gdbarch_gcore_bfd_target (gdbarch, "elf32-microblazeel"); ++ ++ ++ /* Shared library handling. */ ++ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); ++ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); ++ ++ set_gdbarch_regset_from_core_section (gdbarch, ++ microblaze_regset_from_core_section); ++ ++ /* Enable TLS support. */ ++ set_gdbarch_fetch_tls_load_module_address (gdbarch, ++ svr4_fetch_objfile_link_map); ++ + } + + /* -Wmissing-prototypes */ diff --git a/package/gdb-microblaze/patches/patch-gdb_microblaze-rom_c b/package/gdb-microblaze/patches/patch-gdb_microblaze-rom_c new file mode 100644 index 000000000..62c12741d --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_microblaze-rom_c @@ -0,0 +1,18 @@ +--- gdb-7.8.2.orig/gdb/microblaze-rom.c 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/microblaze-rom.c 2016-09-21 10:34:30.029222319 +0200 +@@ -1,6 +1,6 @@ + /* Remote debugging interface to Xilinx MicroBlaze. + +- Copyright (C) 2009-2014 Free Software Foundation, Inc. ++ Copyright (C) 2009-2013 Free Software Foundation, Inc. + + This file is part of GDB. + +@@ -21,7 +21,6 @@ + #include "gdbcore.h" + #include "target.h" + #include "monitor.h" +-#include + #include "serial.h" + #include "regcache.h" + diff --git a/package/gdb-microblaze/patches/patch-gdb_microblaze-tdep_c b/package/gdb-microblaze/patches/patch-gdb_microblaze-tdep_c new file mode 100644 index 000000000..ab19e4d7c --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_microblaze-tdep_c @@ -0,0 +1,467 @@ +--- gdb-7.8.2.orig/gdb/microblaze-tdep.c 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/microblaze-tdep.c 2016-09-21 10:34:30.029222319 +0200 +@@ -1,6 +1,6 @@ + /* Target-dependent code for Xilinx MicroBlaze. + +- Copyright (C) 2009-2014 Free Software Foundation, Inc. ++ Copyright (C) 2009-2013 Free Software Foundation, Inc. + + This file is part of GDB. + +@@ -29,13 +29,13 @@ + #include "inferior.h" + #include "regcache.h" + #include "target.h" ++#include "frame.h" + #include "frame-base.h" + #include "frame-unwind.h" + #include "dwarf2-frame.h" + #include "osabi.h" + + #include "gdb_assert.h" +-#include + #include "target-descriptions.h" + #include "opcodes/microblaze-opcm.h" + #include "opcodes/microblaze-dis.h" +@@ -73,7 +73,8 @@ static const char *microblaze_register_n + "rpc", "rmsr", "rear", "resr", "rfsr", "rbtr", + "rpvr0", "rpvr1", "rpvr2", "rpvr3", "rpvr4", "rpvr5", "rpvr6", + "rpvr7", "rpvr8", "rpvr9", "rpvr10", "rpvr11", +- "redr", "rpid", "rzpr", "rtlbx", "rtlbsx", "rtlblo", "rtlbhi" ++ "redr", "rpid", "rzpr", "rtlbx", "rtlbsx", "rtlblo", "rtlbhi", ++ "rslr", "rshr" + }; + + #define MICROBLAZE_NUM_REGS ARRAY_SIZE (microblaze_register_names) +@@ -145,6 +146,14 @@ microblaze_push_dummy_code (struct gdbar + return sp; + } + ++static CORE_ADDR ++microblaze_store_arguments (struct regcache *regcache, int nargs, ++ struct value **args, CORE_ADDR sp, ++ int struct_return, CORE_ADDR struct_addr) ++{ ++ error (_("store_arguments not implemented")); ++ return sp; ++} + + static CORE_ADDR + microblaze_push_dummy_call (struct gdbarch *gdbarch, struct value *function, +@@ -156,14 +165,52 @@ microblaze_push_dummy_call (struct gdbar + return sp; + } + ++static int ++microblaze_linux_memory_remove_breakpoint (struct gdbarch *gdbarch, ++ struct bp_target_info *bp_tgt) ++{ ++ CORE_ADDR addr = bp_tgt->placed_address; ++ const unsigned char *bp; ++ int val; ++ int bplen; ++ gdb_byte old_contents[BREAKPOINT_MAX]; ++ struct cleanup *cleanup; ++ ++ /* Determine appropriate breakpoint contents and size for this address. */ ++ bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen); ++ if (bp == NULL) ++ error (_("Software breakpoints not implemented for this target.")); ++ ++ /* Make sure we see the memory breakpoints. */ ++ cleanup = make_show_memory_breakpoints_cleanup (1); ++ val = target_read_memory (addr, old_contents, bplen); ++ ++ /* If our breakpoint is no longer at the address, this means that the ++ program modified the code on us, so it is wrong to put back the ++ old value. */ ++ if (val == 0 && memcmp (bp, old_contents, bplen) == 0) ++ { ++ val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen); ++ microblaze_debug ("microblaze_linux_memory_remove_breakpoint writing back to memory at addr 0x%lx\n", addr); ++ } ++ ++ do_cleanups (cleanup); ++ return val; ++} ++ + static const gdb_byte * + microblaze_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pc, + int *len) + { ++ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); + static gdb_byte break_insn[] = MICROBLAZE_BREAKPOINT; ++ static gdb_byte break_insn_le[] = MICROBLAZE_BREAKPOINT_LE; + + *len = sizeof (break_insn); +- return break_insn; ++ if (byte_order == BFD_ENDIAN_BIG) ++ return break_insn; ++ else ++ return break_insn_le; + } + + /* Allocate and initialize a frame cache. */ +@@ -178,6 +225,7 @@ microblaze_alloc_frame_cache (void) + /* Base address. */ + cache->base = 0; + cache->pc = 0; ++ cache->saved_sp = 0; + + /* Frameless until proven otherwise. */ + cache->frameless_p = 1; +@@ -234,6 +282,8 @@ microblaze_analyze_prologue (struct gdba + int flags = 0; + int save_hidden_pointer_found = 0; + int non_stack_instruction_found = 0; ++ int n_insns; ++ unsigned int *insn_block; + + /* Find the start of this function. */ + find_pc_partial_function (pc, &name, &func_addr, &func_end); +@@ -273,11 +323,18 @@ microblaze_analyze_prologue (struct gdba + name, paddress (gdbarch, func_addr), + paddress (gdbarch, stop)); + ++/* Do a block read to minimize the transaction with the Debug Agent */ ++ n_insns = (stop == func_addr) ? 1 : ((stop - func_addr) / INST_WORD_SIZE); ++ insn_block = calloc(n_insns, sizeof(unsigned long)); ++ ++ target_read_memory (func_addr, (void*) insn_block, n_insns * INST_WORD_SIZE ); ++ + for (addr = func_addr; addr < stop; addr += INST_WORD_SIZE) + { + insn = microblaze_fetch_instruction (addr); ++ //insn = insn_block[(addr - func_addr) / INST_WORD_SIZE]; + op = microblaze_decode_insn (insn, &rd, &ra, &rb, &imm); +- microblaze_debug ("%s %08lx\n", paddress (gdbarch, pc), insn); ++ microblaze_debug ("%s %08lx op=%x r%d r%d imm=%d\n", paddress (gdbarch, addr), insn, op, rd, ra, imm); + + /* This code is very sensitive to what functions are present in the + prologue. It assumes that the (addi, addik, swi, sw) can be the +@@ -291,6 +348,7 @@ microblaze_analyze_prologue (struct gdba + cache->frameless_p = 0; /* Frame found. */ + save_hidden_pointer_found = 0; + non_stack_instruction_found = 0; ++ cache->register_offsets[rd] = -imm; + continue; + } + else if (IS_SPILL_SP(op, rd, ra)) +@@ -401,8 +459,8 @@ microblaze_analyze_prologue (struct gdba + part of the prologue. */ + if (save_hidden_pointer_found) + prologue_end_addr -= INST_WORD_SIZE; +- +- return prologue_end_addr; ++ free(insn_block); ++ return prologue_end_addr; + } + + static CORE_ADDR +@@ -452,6 +510,7 @@ microblaze_skip_prologue (struct gdbarch + return start_pc; + } + ++enum { REG_UNAVAIL = (CORE_ADDR) -1 }; + /* Normal frames. */ + + static struct microblaze_frame_cache * +@@ -459,7 +518,7 @@ microblaze_frame_cache (struct frame_inf + { + struct microblaze_frame_cache *cache; + struct gdbarch *gdbarch = get_frame_arch (next_frame); +- CORE_ADDR func; ++ CORE_ADDR current_pc; + int rn; + + if (*this_cache) +@@ -473,9 +532,18 @@ microblaze_frame_cache (struct frame_inf + for (rn = 0; rn < gdbarch_num_regs (gdbarch); rn++) + cache->register_offsets[rn] = -1; + +- func = get_frame_func (next_frame); ++ cache->pc = get_frame_func (next_frame); ++ current_pc = get_frame_pc (next_frame); + +- cache->pc = get_frame_address_in_block (next_frame); ++ if (cache->pc) ++ microblaze_analyze_prologue (gdbarch, cache->pc, current_pc, ++ cache); ++ ++ cache->base = get_frame_register_unsigned (next_frame, gdbarch_sp_regnum (gdbarch)); ++ cache->saved_sp = cache->base + cache->framesize; ++ ++ cache->register_offsets[MICROBLAZE_PREV_PC_REGNUM] = cache->base; ++ cache->register_offsets[MICROBLAZE_SP_REGNUM] = cache->saved_sp; + + return cache; + } +@@ -501,6 +569,14 @@ microblaze_frame_prev_register (struct f + struct microblaze_frame_cache *cache = + microblaze_frame_cache (this_frame, this_cache); + ++ if ((regnum == MICROBLAZE_SP_REGNUM && ++ cache->register_offsets[MICROBLAZE_SP_REGNUM]) ++ || (regnum == MICROBLAZE_FP_REGNUM && ++ cache->register_offsets[MICROBLAZE_SP_REGNUM])) ++ ++ return frame_unwind_got_constant (this_frame, regnum, ++ cache->register_offsets[MICROBLAZE_SP_REGNUM]); ++ + if (cache->frameless_p) + { + if (regnum == MICROBLAZE_PC_REGNUM) +@@ -508,11 +584,18 @@ microblaze_frame_prev_register (struct f + if (regnum == MICROBLAZE_SP_REGNUM) + regnum = 1; + return trad_frame_get_prev_register (this_frame, +- cache->saved_regs, regnum); ++ cache->saved_regs, regnum); + } +- else +- return trad_frame_get_prev_register (this_frame, cache->saved_regs, +- regnum); ++ ++ if (regnum == MICROBLAZE_PC_REGNUM) ++ { ++ regnum = 15; ++ return frame_unwind_got_memory (this_frame, regnum, ++ cache->register_offsets[MICROBLAZE_PREV_PC_REGNUM]); ++ } ++ ++ return trad_frame_get_prev_register (this_frame, cache->saved_regs, ++ regnum); + + } + +@@ -536,6 +619,12 @@ microblaze_frame_base_address (struct fr + return cache->base; + } + ++static const struct frame_unwind * ++microblaze_frame_sniffer (struct frame_info *next_frame) ++{ ++ return µblaze_frame_unwind; ++} ++ + static const struct frame_base microblaze_frame_base = + { + µblaze_frame_unwind, +@@ -628,6 +717,109 @@ microblaze_stabs_argument_has_addr (stru + return (TYPE_LENGTH (type) == 16); + } + ++int ++microblaze_software_single_step (struct frame_info *frame) ++{ ++ struct gdbarch *arch = get_frame_arch (frame); ++ struct address_space *aspace = get_frame_address_space (frame); ++ struct gdbarch_tdep *tdep = gdbarch_tdep (arch); ++ static char le_breakp[] = MICROBLAZE_BREAKPOINT_LE; ++ static char be_breakp[] = MICROBLAZE_BREAKPOINT; ++ enum bfd_endian byte_order = gdbarch_byte_order (arch); ++ char *breakp = byte_order == BFD_ENDIAN_BIG ? be_breakp : le_breakp; ++ int ret = 0; ++ ++ /* Save the address and the values of the next_pc and the target */ ++ static struct sstep_breaks ++ { ++ CORE_ADDR address; ++ bfd_boolean valid; ++ /* Shadow contents. */ ++ char data[INST_WORD_SIZE]; ++ } stepbreaks[2]; ++ int ii; ++ ++ if (1) ++ { ++ CORE_ADDR pc; ++ long insn; ++ enum microblaze_instr minstr; ++ bfd_boolean isunsignednum; ++ enum microblaze_instr_type insn_type; ++ short delay_slots; ++ int imm; ++ bfd_boolean immfound = FALSE; ++ ++ /* Set a breakpoint at the next instruction */ ++ /* If the current instruction is an imm, set it at the inst after */ ++ /* If the instruction has a delay slot, skip the delay slot */ ++ pc = get_frame_pc (frame); ++ insn = microblaze_fetch_instruction (pc); ++ minstr = get_insn_microblaze (insn, &isunsignednum, &insn_type, &delay_slots); ++ if (insn_type == immediate_inst) ++ { ++ int rd, ra, rb; ++ immfound = TRUE; ++ minstr = microblaze_decode_insn (insn, &rd, &ra, &rb, &imm); ++ pc = pc + INST_WORD_SIZE; ++ insn = microblaze_fetch_instruction (pc); ++ minstr = get_insn_microblaze (insn, &isunsignednum, &insn_type, &delay_slots); ++ } ++ stepbreaks[0].address = pc + (delay_slots * INST_WORD_SIZE) + INST_WORD_SIZE; ++ if (insn_type != return_inst) { ++ stepbreaks[0].valid = TRUE; ++ } else { ++ stepbreaks[0].valid = FALSE; ++ } ++ ++ microblaze_debug ("single-step insn_type=%x insn=%x\n", insn_type, insn); ++ /* Now check for branch or return instructions */ ++ if (insn_type == branch_inst || insn_type == return_inst) { ++ int limm; ++ int lrd, lra, lrb; ++ int ra, rb; ++ bfd_boolean targetvalid; ++ bfd_boolean unconditionalbranch; ++ microblaze_decode_insn(insn, &lrd, &lra, &lrb, &limm); ++ if (lra >= 0 && lra < MICROBLAZE_NUM_REGS) ++ ra = get_frame_register_unsigned (frame, lra); ++ else ++ ra = 0; ++ if (lrb >= 0 && lrb < MICROBLAZE_NUM_REGS) ++ rb = get_frame_register_unsigned (frame, lrb); ++ else ++ rb = 0; ++ ++ stepbreaks[1].address = microblaze_get_target_address (insn, immfound, imm, pc, ra, rb, &targetvalid, &unconditionalbranch); ++ microblaze_debug ("single-step uncondbr=%d targetvalid=%d target=%x\n", unconditionalbranch, targetvalid, stepbreaks[1].address); ++ ++ if (unconditionalbranch) ++ stepbreaks[0].valid = FALSE; /* This is a unconditional branch: will not come to the next address */ ++ if (targetvalid && (stepbreaks[0].valid == FALSE || ++ (stepbreaks[0].address != stepbreaks[1].address)) ++ && (stepbreaks[1].address != pc)) { ++ stepbreaks[1].valid = TRUE; ++ } else { ++ stepbreaks[1].valid = FALSE; ++ } ++ } else { ++ stepbreaks[1].valid = FALSE; ++ } ++ ++ /* Insert the breakpoints */ ++ for (ii = 0; ii < 2; ++ii) ++ { ++ ++ /* ignore invalid breakpoint. */ ++ if (stepbreaks[ii].valid) { ++ insert_single_step_breakpoint (arch, aspace, stepbreaks[ii].address); ++ ret = 1; ++ } ++ } ++ } ++ return ret; ++} ++ + static void + microblaze_write_pc (struct regcache *regcache, CORE_ADDR pc) + { +@@ -664,6 +856,70 @@ microblaze_dwarf2_reg_to_regnum (struct + return dwarf2_to_reg_map[reg]; + } + ++ ++void ++microblaze_supply_gregset (const struct microblaze_gregset *gregset, ++ struct regcache *regcache, ++ int regnum, const void *gregs) ++{ ++ unsigned int *regs = gregs; ++ if (regnum >= 0) ++ regcache_raw_supply (regcache, regnum, regs + regnum); ++ ++ if (regnum == -1) { ++ int i; ++ ++ for (i = 0; i < 50; i++) { ++ regcache_raw_supply (regcache, i, regs + i); ++ } ++ } ++} ++ ++ ++void ++microblaze_collect_gregset (const struct microblaze_gregset *gregset, ++ const struct regcache *regcache, ++ int regnum, void *gregs) ++{ ++ /* FIXME. */ ++} ++ ++void ++microblaze_supply_fpregset (struct regcache *regcache, ++ int regnum, const void *fpregs) ++{ ++ /* FIXME. */ ++} ++ ++void ++microblaze_collect_fpregset (const struct regcache *regcache, ++ int regnum, void *fpregs) ++{ ++ /* FIXME. */ ++} ++ ++ ++/* Return the appropriate register set for the core section identified ++ by SECT_NAME and SECT_SIZE. */ ++ ++const struct regset * ++microblaze_regset_from_core_section (struct gdbarch *gdbarch, ++ const char *sect_name, size_t sect_size) ++{ ++ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); ++ ++ microblaze_debug ("microblaze_regset_from_core_section, sect_name = %s\n", sect_name); ++ ++ if (strcmp (sect_name, ".reg") == 0 && sect_size >= tdep->sizeof_gregset) ++ return tdep->gregset; ++ ++ if (strcmp (sect_name, ".reg2") == 0 && sect_size >= tdep->sizeof_fpregset) ++ return tdep->fpregset; ++ ++ microblaze_debug ("microblaze_regset_from_core_section returning null :-( \n"); ++ return NULL; ++} ++ + static struct gdbarch * + microblaze_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) + { +@@ -679,6 +935,11 @@ microblaze_gdbarch_init (struct gdbarch_ + tdep = XNEW (struct gdbarch_tdep); + gdbarch = gdbarch_alloc (&info, tdep); + ++ tdep->gregset = NULL; ++ tdep->sizeof_gregset = 0; ++ tdep->fpregset = NULL; ++ tdep->sizeof_fpregset = 0; ++ + set_gdbarch_long_double_bit (gdbarch, 128); + + set_gdbarch_num_regs (gdbarch, MICROBLAZE_NUM_REGS); +@@ -706,7 +967,10 @@ microblaze_gdbarch_init (struct gdbarch_ + /* Stack grows downward. */ + set_gdbarch_inner_than (gdbarch, core_addr_lessthan); + ++ set_gdbarch_memory_remove_breakpoint (gdbarch, microblaze_linux_memory_remove_breakpoint); ++ + set_gdbarch_breakpoint_from_pc (gdbarch, microblaze_breakpoint_from_pc); ++ set_gdbarch_software_single_step (gdbarch, microblaze_software_single_step); + + set_gdbarch_frame_args_skip (gdbarch, 8); + +@@ -725,6 +989,13 @@ microblaze_gdbarch_init (struct gdbarch_ + dwarf2_append_unwinders (gdbarch); + frame_unwind_append_unwinder (gdbarch, µblaze_frame_unwind); + frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer); ++ //frame_base_append_sniffer (gdbarch, microblaze_frame_sniffer); ++ ++ /* If we have register sets, enable the generic core file support. */ ++ if (tdep->gregset) { ++ set_gdbarch_regset_from_core_section (gdbarch, ++ microblaze_regset_from_core_section); ++ } + + return gdbarch; + } diff --git a/package/gdb-microblaze/patches/patch-gdb_microblaze-tdep_h b/package/gdb-microblaze/patches/patch-gdb_microblaze-tdep_h new file mode 100644 index 000000000..d2cee77c7 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_microblaze-tdep_h @@ -0,0 +1,91 @@ +--- gdb-7.8.2.orig/gdb/microblaze-tdep.h 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/gdb/microblaze-tdep.h 2016-09-21 10:34:30.029222319 +0200 +@@ -1,6 +1,6 @@ + /* Target-dependent code for Xilinx MicroBlaze. + +- Copyright (C) 2009-2014 Free Software Foundation, Inc. ++ Copyright (C) 2009-2013 Free Software Foundation, Inc. + + This file is part of GDB. + +@@ -22,8 +22,22 @@ + + + /* Microblaze architecture-specific information. */ ++struct microblaze_gregset ++{ ++ unsigned int gregs[32]; ++ unsigned int fpregs[32]; ++ unsigned int pregs[16]; ++}; ++ + struct gdbarch_tdep + { ++ int dummy; // declare something. ++ ++ /* Register sets. */ ++ struct regset *gregset; ++ size_t sizeof_gregset; ++ struct regset *fpregset; ++ size_t sizeof_fpregset; + }; + + struct microblaze_frame_cache +@@ -42,7 +56,8 @@ struct microblaze_frame_cache + int fp_regnum; + + /* Offsets to saved registers. */ +- int register_offsets[57]; /* Must match MICROBLAZE_NUM_REGS. */ ++ int register_offsets[59]; /* Must match MICROBLAZE_NUM_REGS. */ ++ CORE_ADDR saved_sp; + + /* Table of saved registers. */ + struct trad_frame_saved_reg *saved_regs; +@@ -66,11 +81,11 @@ enum microblaze_regnum + MICROBLAZE_R12_REGNUM, + MICROBLAZE_R13_REGNUM, + MICROBLAZE_R14_REGNUM, +- MICROBLAZE_R15_REGNUM, ++ MICROBLAZE_R15_REGNUM, MICROBLAZE_PREV_PC_REGNUM = MICROBLAZE_R15_REGNUM, + MICROBLAZE_R16_REGNUM, + MICROBLAZE_R17_REGNUM, + MICROBLAZE_R18_REGNUM, +- MICROBLAZE_R19_REGNUM, ++ MICROBLAZE_R19_REGNUM, MICROBLAZE_FP_REGNUM = MICROBLAZE_R19_REGNUM, + MICROBLAZE_R20_REGNUM, + MICROBLAZE_R21_REGNUM, + MICROBLAZE_R22_REGNUM, +@@ -107,7 +122,9 @@ enum microblaze_regnum + MICROBLAZE_RTLBX_REGNUM, + MICROBLAZE_RTLBSX_REGNUM, + MICROBLAZE_RTLBLO_REGNUM, +- MICROBLAZE_RTLBHI_REGNUM ++ MICROBLAZE_RTLBHI_REGNUM, ++ MICROBLAZE_SLR_REGNUM, ++ MICROBLAZE_SHR_REGNUM + }; + + /* All registers are 32 bits. */ +@@ -115,6 +132,21 @@ enum microblaze_regnum + + /* MICROBLAZE_BREAKPOINT defines the breakpoint that should be used. + Only used for native debugging. */ +-#define MICROBLAZE_BREAKPOINT {0xb9, 0xcc, 0x00, 0x60} ++#define MICROBLAZE_BREAKPOINT {0xba, 0x0c, 0x00, 0x18} ++#define MICROBLAZE_BREAKPOINT_LE {0x18, 0x00, 0x0c, 0xba} ++ ++extern void microblaze_supply_gregset (const struct microblaze_gregset *gregset, ++ struct regcache *regcache, ++ int regnum, const void *gregs); ++extern void microblaze_collect_gregset (const struct microblaze_gregset *gregset, ++ const struct regcache *regcache, ++ int regnum, void *gregs); ++extern void microblaze_supply_fpregset (struct regcache *regcache, ++ int regnum, const void *fpregs); ++extern void microblaze_collect_fpregset (const struct regcache *regcache, ++ int regnum, void *fpregs); ++ ++extern const struct regset * microblaze_regset_from_core_section (struct gdbarch *gdbarch, ++ const char *sect_name, size_t sect_size); + + #endif /* microblaze-tdep.h */ diff --git a/package/gdb-microblaze/patches/patch-gdb_regformats_reg-microblaze_dat b/package/gdb-microblaze/patches/patch-gdb_regformats_reg-microblaze_dat new file mode 100644 index 000000000..51eac74a4 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_regformats_reg-microblaze_dat @@ -0,0 +1,44 @@ +--- gdb-7.8.2.orig/gdb/regformats/reg-microblaze.dat 1970-01-01 00:00:00.000000000 +0100 ++++ gdb-7.8.2/gdb/regformats/reg-microblaze.dat 2016-09-21 10:34:30.029222319 +0200 +@@ -0,0 +1,41 @@ ++name:microblaze ++expedite:r1,pc ++32:r0 ++32:r1 ++32:r2 ++32:r3 ++32:r4 ++32:r5 ++32:r6 ++32:r7 ++32:r8 ++32:r9 ++32:r10 ++32:r11 ++32:r12 ++32:r13 ++32:r14 ++32:r15 ++32:r16 ++32:r17 ++32:r18 ++32:r19 ++32:r20 ++32:r21 ++32:r22 ++32:r23 ++32:r24 ++32:r25 ++32:r26 ++32:r27 ++32:r28 ++32:r29 ++32:r30 ++32:r31 ++32:pc ++32:msr ++32:ear ++32:esr ++32:fsr ++32:slr ++32:shr diff --git a/package/gdb-microblaze/patches/patch-gdb_sgidefs_h b/package/gdb-microblaze/patches/patch-gdb_sgidefs_h new file mode 100644 index 000000000..bdba952ee --- /dev/null +++ b/package/gdb-microblaze/patches/patch-gdb_sgidefs_h @@ -0,0 +1,33 @@ +--- gdb-7.8.2.orig/gdb/sgidefs.h 1970-01-01 00:00:00.000000000 +0100 ++++ gdb-7.8.2/gdb/sgidefs.h 2016-09-20 19:56:32.003878822 +0200 +@@ -0,0 +1,30 @@ ++#ifndef _SGIDEFS_H ++#define _SGIDEFS_H ++ ++/* MIPS ABI crap that GLIBC puts into /include ++by default, and GDB depends on it happily. */ ++ ++#define _MIPS_ISA_MIPS1 1 ++#define _MIPS_ISA_MIPS2 2 ++#define _MIPS_ISA_MIPS3 3 ++#define _MIPS_ISA_MIPS4 4 ++#define _MIPS_ISA_MIPS5 5 ++#define _MIPS_ISA_MIPS32 6 ++#define _MIPS_ISA_MIPS64 7 ++ ++#ifndef _ABIO32 ++#define _ABIO32 1 ++#endif ++#define _MIPS_SIM_ABI32 _ABIO32 ++ ++#ifndef _ABIN32 ++#define _ABIN32 2 ++#endif ++#define _MIPS_SIM_NABI32 _ABIN32 ++ ++#ifndef _ABI64 ++#define _ABI64 3 ++#endif ++#define _MIPS_SIM_ABI64 _ABI64 ++ ++#endif diff --git a/package/gdb-microblaze/patches/patch-include_elf_microblaze_h b/package/gdb-microblaze/patches/patch-include_elf_microblaze_h new file mode 100644 index 000000000..889ac2681 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-include_elf_microblaze_h @@ -0,0 +1,10 @@ +--- gdb-7.8.2.orig/include/elf/microblaze.h 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/include/elf/microblaze.h 2016-09-21 10:34:30.029222319 +0200 +@@ -58,6 +58,7 @@ START_RELOC_NUMBERS (elf_microblaze_relo + RELOC_NUMBER (R_MICROBLAZE_TLSDTPREL64, 27) /* TLS Offset Within TLS Block */ + RELOC_NUMBER (R_MICROBLAZE_TLSGOTTPREL32, 28) /* TLS Offset From Thread Pointer */ + RELOC_NUMBER (R_MICROBLAZE_TLSTPREL32, 29) /* TLS Offset From Thread Pointer */ ++ RELOC_NUMBER (R_MICROBLAZE_32_NONE, 30) + + END_RELOC_NUMBERS (R_MICROBLAZE_max) + diff --git a/package/gdb-microblaze/patches/patch-opcodes_microblaze-opc_h b/package/gdb-microblaze/patches/patch-opcodes_microblaze-opc_h new file mode 100644 index 000000000..7dd8a028e --- /dev/null +++ b/package/gdb-microblaze/patches/patch-opcodes_microblaze-opc_h @@ -0,0 +1,29 @@ +--- gdb-7.8.2.orig/opcodes/microblaze-opc.h 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/opcodes/microblaze-opc.h 2016-09-21 10:34:30.029222319 +0200 +@@ -91,6 +91,7 @@ + #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */ + #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */ + #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */ ++#define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */ + #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */ + + /* New Mask for msrset, msrclr insns. */ +@@ -101,7 +102,7 @@ + #define DELAY_SLOT 1 + #define NO_DELAY_SLOT 0 + +-#define MAX_OPCODES 289 ++#define MAX_OPCODES 291 + + struct op_code_struct + { +@@ -174,7 +175,9 @@ struct op_code_struct + {"wic", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000068, OPCODE_MASK_H34B, wic, special_inst }, + {"wdc", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000064, OPCODE_MASK_H34B, wdc, special_inst }, + {"wdc.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000066, OPCODE_MASK_H34B, wdcclear, special_inst }, ++ {"wdc.ext.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000466, OPCODE_MASK_H35B, wdcextclear, special_inst }, + {"wdc.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000074, OPCODE_MASK_H34B, wdcflush, special_inst }, ++ {"wdc.ext.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000476, OPCODE_MASK_H35B, wdcextflush, special_inst }, + {"mts", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9400C000, OPCODE_MASK_H13S, mts, special_inst }, + {"mfs", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94008000, OPCODE_MASK_H23S, mfs, special_inst }, + {"br", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98000000, OPCODE_MASK_H124, br, branch_inst }, diff --git a/package/gdb-microblaze/patches/patch-opcodes_microblaze-opcm_h b/package/gdb-microblaze/patches/patch-opcodes_microblaze-opcm_h new file mode 100644 index 000000000..3d7994e30 --- /dev/null +++ b/package/gdb-microblaze/patches/patch-opcodes_microblaze-opcm_h @@ -0,0 +1,15 @@ +--- gdb-7.8.2.orig/opcodes/microblaze-opcm.h 2015-01-15 11:58:12.000000000 +0100 ++++ gdb-7.8.2/opcodes/microblaze-opcm.h 2016-09-21 10:34:30.029222319 +0200 +@@ -31,9 +31,9 @@ enum microblaze_instr + idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput, + ncget, ncput, muli, bslli, bsrai, bsrli, mului, or, and, xor, + andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16, +- wic, wdc, wdcclear, wdcflush, mts, mfs, mbar, br, brd, +- brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt, +- bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni, ++ wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, mts, mfs, mbar, ++ br, brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, ++ blt, bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni, + imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid, + brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti, + bgtid, bgei, bgeid, lbu, lbur, lhu, lhur, lw, lwr, lwx, sb, sbr, sh, -- cgit v1.2.3