From e12f13a83ac40ad715e3fa7d7b97b732e69c923a Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Mon, 12 May 2014 10:39:27 +0200 Subject: use ADK_ prefix for environment variables Very old problem, in the time I added glibc support to FreeWRT I had strange problems building glibc because V=99 was used. Now openjdk7 have problem with ARCH. Just use ADK_ prefix for all environment stuff to avoid this. --- mk/build.mk | 77 +++++++++++++++++++++++++++++++------------------------------ 1 file changed, 39 insertions(+), 38 deletions(-) (limited to 'mk') diff --git a/mk/build.mk b/mk/build.mk index 339136238..3e84e69b9 100644 --- a/mk/build.mk +++ b/mk/build.mk @@ -199,16 +199,16 @@ switch: cp -p .config .config.${ADK_TARGET_ARCH}_${ADK_TARGET_SYSTEM};\ fi if [ -f .config.old ];then cp -p .config.old .config.old.${ADK_TARGET_ARCH}_${ADK_TARGET_SYSTEM};fi - if [ -f .config.${ARCH}_${SYSTEM} ];then \ - cp -p .config.${ARCH}_${SYSTEM} .config; \ - cp -p .config.old.${ARCH}_${SYSTEM} .config.old; \ + if [ -f .config.${ADK_TARGET_ARCH}_${ADK_TARGET_SYSTEM} ];then \ + cp -p .config.${ADK_TARGET_ARCH}_${ADK_TARGET_SYSTEM} .config; \ + cp -p .config.old.${ADK_TARGET_ARCH}_${ADK_TARGET_SYSTEM} .config.old; \ $(MAKE) dep; rm .rebuild.* 2>/dev/null ; \ - echo "Setting configuration to target system: ${SYSTEM} with arch: ${ARCH}"; \ + echo "Setting configuration to target system: ${ADK_TARGET_SYSTEM} with arch: ${ADK_TARGET_ARCH}"; \ else \ echo "No old target config found" ;\ mv .config .config.bak ; mv .config.old .config.old.bak; rm .rebuild.* 2>/dev/null ; \ if [ ! -z "$(SYSTEM)" ];then \ - make ARCH=${ARCH} SYSTEM=${SYSTEM} menuconfig; \ + make ADK_TARGET_ARCH=${ADK_TARGET_ARCH} ADK_TARGET_SYSTEM=${ADK_TARGET_SYSTEM} menuconfig; \ else \ make menuconfig; \ fi \ @@ -216,7 +216,7 @@ switch: kernelconfig: ${KERNEL_MAKE_ENV} ${MAKE} \ - ARCH=$(ARCH) \ + ARCH=$(ADK_TARGET_ARCH) \ ${KERNEL_MAKE_OPTS} \ -C $(BUILD_DIR)/linux menuconfig @@ -337,41 +337,41 @@ endif @echo 'source "target/config/Config.in.arch.choice"' >> target/config/Config.in.arch @echo 'source "target/config/Config.in.system.default"' > target/config/Config.in.system @echo 'source "target/config/Config.in.system.choice"' >> target/config/Config.in.system - @if [ ! -z "$(ARCH)" ];then \ + @if [ ! -z "$(ADK_TARGET_ARCH)" ];then \ grep "^config" target/config/Config.in.arch.choice \ - |grep -i "$(ARCH)"\$$ \ + |grep -i "$(ADK_TARGET_ARCH)"\$$ \ |sed -e "s#^config \(.*\)#\1=y#" \ >> $(TOPDIR)/.defconfig; \ fi @for symbol in ${DEFCONFIG}; do \ echo $$symbol >> $(TOPDIR)/.defconfig; \ done - @if [ ! -z "$(FS)" ];then \ + @if [ ! -z "$(ADK_TARGET_FS)" ];then \ grep "^config" target/config/Config.in \ - |grep -i "$(FS)" \ + |grep -i "$(ADK_TARGET_FS)" \ |sed -e "s#^config \(.*\)#\1=y#" \ >> $(TOPDIR)/.defconfig; \ fi - @if [ ! -z "$(COLLECTION)" ];then \ + @if [ ! -z "$(ADK_TARGET_COLLECTION)" ];then \ grep -h "^config" target/packages/pkg-available/* \ - |grep -i "$(COLLECTION)" \ + |grep -i "$(ADK_TARGET_COLLECTION)" \ |sed -e "s#^config \(.*\)#\1=y#" \ >> $(TOPDIR)/.defconfig; \ fi - @if [ ! -z "$(CLIB)" ];then \ + @if [ ! -z "$(ADK_TARGET_LIBC)" ];then \ grep "^config" target/config/Config.in \ - |grep -i "$(CLIB)" \ + |grep -i "$(ADK_TARGET_LIBC)" \ |sed -e "s#^config \(.*\)#\1=y#" \ >> $(TOPDIR)/.defconfig; \ fi - @if [ ! -z "$(SYSTEM)" ];then \ - system=$$(echo "$(SYSTEM)" |sed -e "s/-/_/g"); \ + @if [ ! -z "$(ADK_TARGET_SYSTEM)" ];then \ + system=$$(echo "$(ADK_TARGET_SYSTEM)" |sed -e "s/-/_/g"); \ grep -h "^config" target/*/Config.in.systems \ |grep -i "$$system$$" \ |sed -e "s#^config \(.*\)#\1=y#" \ >> $(TOPDIR)/.defconfig; \ fi - @if [ ! -z "$(SYSTEM)" ];then \ + @if [ ! -z "$(ADK_TARGET_SYSTEM)" ];then \ $(CONFIG)/conf -D .defconfig $(CONFIG_CONFIG_IN); \ fi @@ -401,29 +401,29 @@ endif @echo 'source "target/config/Config.in.arch.choice"' >> target/config/Config.in.arch @echo 'source "target/config/Config.in.system.default"' > target/config/Config.in.system @echo 'source "target/config/Config.in.system.choice"' >> target/config/Config.in.system - @if [ ! -z "$(ARCH)" ];then \ + @if [ ! -z "$(ADK_TARGET_ARCH)" ];then \ grep "^config" target/config/Config.in.arch.choice \ - |grep -i "$(ARCH)"\$$ \ + |grep -i "$(ADK_TARGET_ARCH)"\$$ \ |sed -e "s#^config \(.*\)#\1=y#" \ >> $(TOPDIR)/all.config; \ fi @for symbol in ${DEFCONFIG}; do \ echo $$symbol >> $(TOPDIR)/all.config; \ done - @if [ ! -z "$(FS)" ];then \ + @if [ ! -z "$(ADK_TARGET_FS)" ];then \ grep "^config" target/config/Config.in \ - |grep -i "$(FS)" \ + |grep -i "$(ADK_TARGET_FS)" \ |sed -e "s#^config \(.*\)#\1=y#" \ >> $(TOPDIR)/all.config; \ fi - @if [ ! -z "$(CLIB)" ];then \ + @if [ ! -z "$(ADK_TARGET_LIBC)" ];then \ grep "^config" target/config/Config.in \ - |grep -i "$(CLIB)" \ + |grep -i "$(ADK_TARGET_LIBC)" \ |sed -e "s#^config \(.*\)#\1=y#" \ >> $(TOPDIR)/all.config; \ fi - @if [ ! -z "$(SYSTEM)" ];then \ - system=$$(echo "$(SYSTEM)" |sed -e "s/-/_/g"); \ + @if [ ! -z "$(ADK_TARGET_SYSTEM)" ];then \ + system=$$(echo "$(ADK_TARGET_SYSTEM)" |sed -e "s/-/_/g"); \ grep -h "^config" target/*/Config.in.systems \ |grep -i "$$system" \ |sed -e "s#^config \(.*\)#\1=y#" \ @@ -463,10 +463,10 @@ endif # ! ifeq ($(strip $(ADK_HAVE_DOT_CONFIG)),y) # build all target architecture and libc combinations (toolchain only) bulktoolchain: - @if [ -z "$(CLIB)" ];then \ + @if [ -z "$(ADK_TARGET_LIBC)" ];then \ libc="glibc uclibc musl"; \ else \ - libc="$(CLIB)"; \ + libc="$(ADK_TARGET_LIBC)"; \ fi; \ for libc in $$libc;do \ while read arch; do \ @@ -475,7 +475,7 @@ bulktoolchain: tarch=$$(echo $$arch|sed -e "s#sh4.*#sh#" -e "s#el##" -e "s#eb##" -e "s#mips64.*#mips#" -e "s#hf##" -e "s#x86_64.*#x86_64#" ); \ carch=$$(echo $$arch|sed -e "s#hf##" -e "s#mips64n.*#mips64#" -e "s#mips64el.*#mips64el#" -e 's#x86$$#i686#' -e "s#x86_64.*#x86_64#" ); \ echo === building $$tarch $$libc toolchain-$$arch on $$(date); \ - $(GMAKE) ARCH=$$tarch SYSTEM=toolchain-$$arch CLIB=$$libc defconfig; \ + $(GMAKE) ADK_TARGET_ARCH=$$tarch ADK_TARGET_SYSTEM=toolchain-$$arch ADK_TARGET_LIBC=$$libc defconfig; \ tabi=$$(grep ^ADK_TARGET_ABI= .config|cut -d \" -f 2);\ if [ $$arch = "armhf" ];then arch=arm; else arch=$$arch;fi; \ if [ -z $$tabi ];then abi="";else abi=_$$tabi;fi; \ @@ -491,10 +491,10 @@ bulktoolchain: done test-framework: - @if [ -z "$(CLIB)" ];then \ + @if [ -z "$(ADK_TARGET_LIBC)" ];then \ libc="glibc uclibc musl"; \ else \ - libc="$(CLIB)"; \ + libc="$(ADK_TARGET_LIBC)"; \ fi; \ for libc in $$libc;do \ ( \ @@ -503,7 +503,7 @@ test-framework: tarch=$$(echo $$arch|sed -e "s#el##" -e "s#eb##" -e "s#mips64.*#mips#" -e "s#i686#x86#" -e "s#sh4#sh#" -e "s#hf##" -e "s#x86_64.*#x86_64#"); \ arch=$$(echo $$arch|sed -e 's#x86$$#i686#'); \ echo === building qemu-$$arch for $$libc with $$tarch on $$(date); \ - $(GMAKE) ARCH=$$tarch SYSTEM=qemu-$$arch CLIB=$$libc FS=initramfsarchive COLLECTION=test defconfig; \ + $(GMAKE) ADK_TARGET_ARCH=$$tarch ADK_TARGET_SYSTEM=qemu-$$arch ADK_TARGET_LIBC=$$libc ADK_TARGET_FS=initramfsarchive ADK_TARGET_COLLECTION=test defconfig; \ $(GMAKE) VERBOSE=1 all; if [ $$? -ne 0 ]; then touch .exit; exit 1;fi; \ tabi=$$(grep ^ADK_TARGET_ABI= .config|cut -d \" -f 2);\ if [ -z $$tabi ];then abi="";else abi=_$$tabi;fi; \ @@ -524,9 +524,10 @@ test-framework: release: for libc in uclibc glibc musl;do \ ( \ + mkdir -p $(TOPDIR)/firmware/; \ echo === building $$libc on $$(date); \ $(GMAKE) prereq && \ - $(GMAKE) ARCH=$(ARCH) SYSTEM=$(SYSTEM) CLIB=$$libc FS=archive allmodconfig; \ + $(GMAKE) ADK_TARGET_ARCH=$(ADK_TARGET_ARCH) ADK_TARGET_SYSTEM=$(ADK_TARGET_SYSTEM) ADK_TARGET_LIBC=$$libc ADK_TARGET_FS=archive allmodconfig; \ $(GMAKE) VERBOSE=1 all; if [ $$? -ne 0 ]; then touch .exit; exit 1;fi; \ rm .config; \ ) 2>&1 | tee $(TOPDIR)/firmware/release-build.log; \ @@ -544,14 +545,14 @@ bulk: ( \ echo === building $$arch $$system $$libc on $$(date); \ $(GMAKE) prereq && \ - $(GMAKE) ARCH=$$arch SYSTEM=$$system CLIB=$$libc FS=archive defconfig; \ + $(GMAKE) ADK_TARGET_ARCH=$$arch ADK_TARGET_SYSTEM=$$system ADK_TARGET_LIBC=$$libc ADK_TARGET_FS=archive defconfig; \ $(GMAKE) VERBOSE=1 all; if [ $$? -ne 0 ]; then touch .exit; exit 1;fi; \ rm .config; \ ) 2>&1 | tee $(TOPDIR)/firmware/bulkbuild.log; \ if [ -f .exit ]; then break;fi \ done; \ if [ -f .exit ]; then break;fi \ - done <${TOPDIR}/target/arch.lst ;\ + done <${TOPDIR}/toolchain/$$libc/tarch.lst ;\ if [ -f .exit ];then echo "Bulk build failed!"; rm .exit; exit 1;fi \ done @@ -564,14 +565,14 @@ bulkall: ( \ echo === building $$arch $$system $$libc on $$(date); \ $(GMAKE) prereq && \ - $(GMAKE) ARCH=$$arch SYSTEM=$$system CLIB=$$libc FS=archive allconfig; \ + $(GMAKE) ADK_TARGET_ARCH=$$arch ADK_TARGET_SYSTEM=$$system ADK_TARGET_LIBC=$$libc ADK_TARGET_FS=archive allconfig; \ $(GMAKE) VERBOSE=1 all; if [ $$? -ne 0 ]; then touch .exit; exit 1;fi; \ rm .config; \ ) 2>&1 | tee $(TOPDIR)/firmware/bulkallbuild.log; \ if [ -f .exit ]; then break;fi \ done; \ if [ -f .exit ]; then break;fi \ - done <${TOPDIR}/target/arch.lst ;\ + done <${TOPDIR}/toolchain/$$libc/tarch.lst ;\ if [ -f .exit ];then echo "Bulk build failed!"; rm .exit; exit 1;fi \ done @@ -584,7 +585,7 @@ bulkallmod: ( \ echo === building $$arch $$system $$libc on $$(date); \ $(GMAKE) prereq && \ - $(GMAKE) ARCH=$$arch SYSTEM=$$system CLIB=$$libc FS=archive allmodconfig; \ + $(GMAKE) ADK_TARGET_ARCH=$$arch ADK_TARGET_SYSTEM=$$system ADK_TARGET_LIBC=$$libc ADK_TARGET_FS=archive allmodconfig; \ $(GMAKE) VERBOSE=1 all; if [ $$? -ne 0 ]; then echo $$system-$$libc >.exit; exit 1;fi; \ $(GMAKE) clean; \ rm .config; \ @@ -592,7 +593,7 @@ bulkallmod: if [ -f .exit ]; then break;fi \ done; \ if [ -f .exit ]; then break;fi \ - done <${TOPDIR}/target/arch.lst ;\ + done <${TOPDIR}/toolchain/$$libc/tarch.lst ;\ if [ -f .exit ];then echo "Bulk build failed!"; cat .exit;rm .exit; exit 1;fi \ done -- cgit v1.2.3