From aef64acf2d4f120f473c79dc2a8524c38f6e9afb Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Thu, 29 Jul 2010 23:38:17 +0200 Subject: tac not available on FreeBSD, fix permission in tslib package --- package/tslib/Makefile | 3 + package/tslib/patches/autotool.patch | 73582 ++++++++++++++++----------------- scripts/tsort | 3 + 3 files changed, 36797 insertions(+), 36791 deletions(-) diff --git a/package/tslib/Makefile b/package/tslib/Makefile index 5f384b7f6..2ebd83179 100644 --- a/package/tslib/Makefile +++ b/package/tslib/Makefile @@ -27,6 +27,9 @@ CONFIGURE_ARGS+= --disable-ucb1x00 \ --disable-linear-h2200 \ --disable-arctic2 +pre-build: + @chmod u+x ${WRKBUILD}/install-sh + post-install: $(INSTALL_DIR) $(IDIR_TSLIB)/etc $(INSTALL_DIR) $(IDIR_TSLIB)/usr/lib/ts diff --git a/package/tslib/patches/autotool.patch b/package/tslib/patches/autotool.patch index 803f41800..c72fd2dc1 100644 --- a/package/tslib/patches/autotool.patch +++ b/package/tslib/patches/autotool.patch @@ -1,2736 +1,2195 @@ -diff -Nur tslib-1.0.orig/aclocal.m4 tslib-1.0/aclocal.m4 ---- tslib-1.0.orig/aclocal.m4 1970-01-01 01:00:00.000000000 +0100 -+++ tslib-1.0/aclocal.m4 2010-02-19 00:24:08.800856345 +0100 -@@ -0,0 +1,970 @@ -+# generated automatically by aclocal 1.11.1 -*- Autoconf -*- -+ -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -+# PARTICULAR PURPOSE. -+ -+m4_ifndef([AC_AUTOCONF_VERSION], -+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, -+[m4_warning([this file was generated for autoconf 2.65. -+You have another version of autoconf. It may work, but is not guaranteed to. -+If you have problems, you may need to regenerate the build system entirely. -+To do so, use the procedure documented by the package, typically `autoreconf'.])]) +diff -Nur tslib-1.0.orig/INSTALL tslib-1.0/INSTALL +--- tslib-1.0.orig/INSTALL 2006-08-24 23:02:55.000000000 +0200 ++++ tslib-1.0/INSTALL 2010-07-29 13:39:15.000000000 +0200 +@@ -1,16 +1,25 @@ + Installation Instructions + ************************* + +-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free +-Software Foundation, Inc. ++Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, ++2006, 2007, 2008, 2009 Free Software Foundation, Inc. + +-This file is free documentation; the Free Software Foundation gives +-unlimited permission to copy, distribute and modify it. ++ Copying and distribution of this file, with or without modification, ++are permitted in any medium without royalty provided the copyright ++notice and this notice are preserved. This file is offered as-is, ++without warranty of any kind. + + Basic Installation + ================== + +-These are generic installation instructions. ++ Briefly, the shell commands `./configure; make; make install' should ++configure, build, and install this package. The following ++more-detailed instructions are generic; see the `README' file for ++instructions specific to this package. Some packages provide this ++`INSTALL' file but do not implement all of the features documented ++below. The lack of an optional feature in a given package is not ++necessarily a bug. More recommendations for GNU packages can be found ++in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for + various system-dependent variables used during compilation. It uses +@@ -23,9 +32,9 @@ + + It can also use an optional file (typically called `config.cache' + and enabled with `--cache-file=config.cache' or simply `-C') that saves +-the results of its tests to speed up reconfiguring. (Caching is ++the results of its tests to speed up reconfiguring. Caching is + disabled by default to prevent problems with accidental use of stale +-cache files.) ++cache files. + + If you need to do unusual things to compile the package, please try + to figure out how `configure' could check whether to do them, and mail +@@ -35,30 +44,37 @@ + may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +-`configure' by a program called `autoconf'. You only need +-`configure.ac' if you want to change it or regenerate `configure' using +-a newer version of `autoconf'. ++`configure' by a program called `autoconf'. You need `configure.ac' if ++you want to change it or regenerate `configure' using a newer version ++of `autoconf'. + +-The simplest way to compile this package is: ++ The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type +- `./configure' to configure the package for your system. If you're +- using `csh' on an old version of System V, you might need to type +- `sh ./configure' instead to prevent `csh' from trying to execute +- `configure' itself. ++ `./configure' to configure the package for your system. + +- Running `configure' takes awhile. While running, it prints some +- messages telling which features it is checking for. ++ Running `configure' might take a while. While running, it prints ++ some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with +- the package. ++ the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and +- documentation. ++ documentation. When installing into a prefix owned by root, it is ++ recommended that the package be configured and built as a regular ++ user, and only the `make install' phase executed with root ++ privileges. + -+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. ++ 5. Optionally, type `make installcheck' to repeat any self-tests, but ++ this time using the binaries in their final installed location. ++ This target does not install anything. Running this target as a ++ regular user, particularly if the prior `make install' required ++ root privileges, verifies that the installation completed ++ correctly. + +- 5. You can remove the program binaries and object files from the ++ 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is +@@ -67,65 +83,120 @@ + all sorts of other programs in order to regenerate files that came + with the distribution. + ++ 7. Often, you can also type `make uninstall' to remove the installed ++ files again. In practice, not all packages have tested that ++ uninstallation works correctly, even though it is required by the ++ GNU Coding Standards. + -+# AM_AUTOMAKE_VERSION(VERSION) -+# ---------------------------- -+# Automake X.Y traces this macro to ensure aclocal.m4 has been -+# generated from the m4 files accompanying Automake X.Y. -+# (This private macro should not be called outside this file.) -+AC_DEFUN([AM_AUTOMAKE_VERSION], -+[am__api_version='1.11' -+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -+dnl require some minimum version. Point them to the right macro. -+m4_if([$1], [1.11.1], [], -+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -+]) ++ 8. Some packages, particularly those that use Automake, provide `make ++ distcheck', which can by used by developers to test that all other ++ targets like `make install' and `make uninstall' work correctly. ++ This target is generally not run by end users. + -+# _AM_AUTOCONF_VERSION(VERSION) -+# ----------------------------- -+# aclocal traces this macro to find the Autoconf version. -+# This is a private macro too. Using m4_define simplifies -+# the logic in aclocal, which can simply ignore this definition. -+m4_define([_AM_AUTOCONF_VERSION], []) + Compilers and Options + ===================== + +-Some systems require unusual options for compilation or linking that the +-`configure' script does not know about. Run `./configure --help' for +-details on some of the pertinent environment variables. ++ Some systems require unusual options for compilation or linking that ++the `configure' script does not know about. Run `./configure --help' ++for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters + by setting variables in the command line or in the environment. Here + is an example: + +- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix ++ ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + + Compiling For Multiple Architectures + ==================================== + +-You can compile the package for more than one kind of computer at the ++ You can compile the package for more than one kind of computer at the + same time, by placing the object files for each architecture in their +-own directory. To do this, you must use a version of `make' that +-supports the `VPATH' variable, such as GNU `make'. `cd' to the ++own directory. To do this, you can use GNU `make'. `cd' to the + directory where you want the object files and executables to go and run + the `configure' script. `configure' automatically checks for the +-source code in the directory that `configure' is in and in `..'. ++source code in the directory that `configure' is in and in `..'. This ++is known as a "VPATH" build. + +- If you have to use a `make' that does not support the `VPATH' +-variable, you have to compile the package for one architecture at a +-time in the source code directory. After you have installed the +-package for one architecture, use `make distclean' before reconfiguring +-for another architecture. ++ With a non-GNU `make', it is safer to compile the package for one ++architecture at a time in the source code directory. After you have ++installed the package for one architecture, use `make distclean' before ++reconfiguring for another architecture. + -+# AM_SET_CURRENT_AUTOMAKE_VERSION -+# ------------------------------- -+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -+[AM_AUTOMAKE_VERSION([1.11.1])dnl -+m4_ifndef([AC_AUTOCONF_VERSION], -+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) ++ On MacOS X 10.5 and later systems, you can create libraries and ++executables that work on multiple system types--known as "fat" or ++"universal" binaries--by specifying multiple `-arch' options to the ++compiler but only a single `-arch' option to the preprocessor. Like ++this: + -+# AM_AUX_DIR_EXPAND -*- Autoconf -*- ++ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ ++ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ ++ CPP="gcc -E" CXXCPP="g++ -E" + -+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. ++ This is not guaranteed to produce working output in all cases, you ++may have to build one architecture at a time and combine the results ++using the `lipo' tool if you have problems. + + Installation Names + ================== + +-By default, `make install' will install the package's files in +-`/usr/local/bin', `/usr/local/man', etc. You can specify an +-installation prefix other than `/usr/local' by giving `configure' the +-option `--prefix=PREFIX'. ++ By default, `make install' installs the package's commands under ++`/usr/local/bin', include files under `/usr/local/include', etc. You ++can specify an installation prefix other than `/usr/local' by giving ++`configure' the option `--prefix=PREFIX', where PREFIX must be an ++absolute file name. + + You can specify separate installation prefixes for + architecture-specific files and architecture-independent files. If you +-give `configure' the option `--exec-prefix=PREFIX', the package will +-use PREFIX as the prefix for installing programs and libraries. +-Documentation and other data files will still use the regular prefix. ++pass the option `--exec-prefix=PREFIX' to `configure', the package uses ++PREFIX as the prefix for installing programs and libraries. ++Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give + options like `--bindir=DIR' to specify different values for particular + kinds of files. Run `configure --help' for a list of the directories +-you can set and what kinds of files go in them. ++you can set and what kinds of files go in them. In general, the ++default for these options is expressed in terms of `${prefix}', so that ++specifying just `--prefix' will affect all of the other directory ++specifications that were not explicitly provided. + -+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -+# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -+# -+# Of course, Automake must honor this variable whenever it calls a -+# tool from the auxiliary directory. The problem is that $srcdir (and -+# therefore $ac_aux_dir as well) can be either absolute or relative, -+# depending on how configure is run. This is pretty annoying, since -+# it makes $ac_aux_dir quite unusable in subdirectories: in the top -+# source directory, any form will work fine, but in subdirectories a -+# relative path needs to be adjusted first. -+# -+# $ac_aux_dir/missing -+# fails when called from a subdirectory if $ac_aux_dir is relative -+# $top_srcdir/$ac_aux_dir/missing -+# fails if $ac_aux_dir is absolute, -+# fails when called from a subdirectory in a VPATH build with -+# a relative $ac_aux_dir -+# -+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -+# are both prefixed by $srcdir. In an in-source build this is usually -+# harmless because $srcdir is `.', but things will broke when you -+# start a VPATH build or use an absolute $srcdir. -+# -+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -+# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -+# and then we would define $MISSING as -+# MISSING="\${SHELL} $am_aux_dir/missing" -+# This will work as long as MISSING is not called from configure, because -+# unfortunately $(top_srcdir) has no meaning in configure. -+# However there are other variables, like CC, which are often used in -+# configure, and could therefore not use this "fixed" $ac_aux_dir. -+# -+# Another solution, used here, is to always expand $ac_aux_dir to an -+# absolute PATH. The drawback is that using absolute paths prevent a -+# configured tree to be moved without reconfiguration. ++ The most portable way to affect installation locations is to pass the ++correct locations to `configure'; however, many packages provide one or ++both of the following shortcuts of passing variable assignments to the ++`make install' command line to change installation locations without ++having to reconfigure or recompile. + -+AC_DEFUN([AM_AUX_DIR_EXPAND], -+[dnl Rely on autoconf to set up CDPATH properly. -+AC_PREREQ([2.50])dnl -+# expand $ac_aux_dir to an absolute path -+am_aux_dir=`cd $ac_aux_dir && pwd` -+]) ++ The first method involves providing an override variable for each ++affected directory. For example, `make install ++prefix=/alternate/directory' will choose an alternate location for all ++directory configuration variables that were expressed in terms of ++`${prefix}'. Any directories that were specified during `configure', ++but not in terms of `${prefix}', must each be overridden at install ++time for the entire installation to be relocated. The approach of ++makefile variable overrides for each directory variable is required by ++the GNU Coding Standards, and ideally causes no recompilation. ++However, some platforms have known limitations with the semantics of ++shared libraries that end up requiring recompilation when using this ++method, particularly noticeable in packages that use GNU Libtool. + -+# AM_CONDITIONAL -*- Autoconf -*- ++ The second method involves providing the `DESTDIR' variable. For ++example, `make install DESTDIR=/alternate/directory' will prepend ++`/alternate/directory' before all installation names. The approach of ++`DESTDIR' overrides is not required by the GNU Coding Standards, and ++does not work on platforms that have drive letters. On the other hand, ++it does better at avoiding recompilation issues, and works well even ++when some directory options were not specified in terms of `${prefix}' ++at `configure' time. + -+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. ++Optional Features ++================= + + If the package supports it, you can cause programs to be installed + with an extra prefix or suffix on their names by giving `configure' the + option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +-Optional Features +-================= +- +-Some packages pay attention to `--enable-FEATURE' options to ++ Some packages pay attention to `--enable-FEATURE' options to + `configure', where FEATURE indicates an optional part of the package. + They may also pay attention to `--with-PACKAGE' options, where PACKAGE + is something like `gnu-as' or `x' (for the X Window System). The +@@ -137,14 +208,53 @@ + you can use the `configure' options `--x-includes=DIR' and + `--x-libraries=DIR' to specify their locations. + ++ Some packages offer the ability to configure how verbose the ++execution of `make' will be. For these packages, running `./configure ++--enable-silent-rules' sets the default to minimal output, which can be ++overridden with `make V=1'; while running `./configure ++--disable-silent-rules' sets the default to verbose, which can be ++overridden with `make V=0'. + -+# serial 9 ++Particular systems ++================== + -+# AM_CONDITIONAL(NAME, SHELL-CONDITION) -+# ------------------------------------- -+# Define a conditional. -+AC_DEFUN([AM_CONDITIONAL], -+[AC_PREREQ(2.52)dnl -+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], -+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -+AC_SUBST([$1_TRUE])dnl -+AC_SUBST([$1_FALSE])dnl -+_AM_SUBST_NOTMAKE([$1_TRUE])dnl -+_AM_SUBST_NOTMAKE([$1_FALSE])dnl -+m4_define([_AM_COND_VALUE_$1], [$2])dnl -+if $2; then -+ $1_TRUE= -+ $1_FALSE='#' -+else -+ $1_TRUE='#' -+ $1_FALSE= -+fi -+AC_CONFIG_COMMANDS_PRE( -+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then -+ AC_MSG_ERROR([[conditional "$1" was never defined. -+Usually this means the macro was only invoked conditionally.]]) -+fi])]) ++ On HP-UX, the default C compiler is not ANSI C compatible. If GNU ++CC is not installed, it is recommended to use the following options in ++order to use an ANSI C compiler: + -+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. ++ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + -+# serial 10 ++and if that doesn't work, install pre-built binaries of GCC for HP-UX. + -+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -+# written in clear, in which case automake, when reading aclocal.m4, -+# will think it sees a *use*, and therefore will trigger all it's -+# C support machinery. Also note that it means that autoscan, seeing -+# CC etc. in the Makefile, will ask for an AC_PROG_CC use... ++ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot ++parse its `' header file. The option `-nodtk' can be used as ++a workaround. If GNU CC is not installed, it is therefore recommended ++to try + ++ ./configure CC="cc" + -+# _AM_DEPENDENCIES(NAME) -+# ---------------------- -+# See how the compiler implements dependency checking. -+# NAME is "CC", "CXX", "GCJ", or "OBJC". -+# We try a few techniques and use that to set a single cache variable. -+# -+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -+# dependency, and given that the user is not expected to run this macro, -+# just rely on AC_PROG_CC. -+AC_DEFUN([_AM_DEPENDENCIES], -+[AC_REQUIRE([AM_SET_DEPDIR])dnl -+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -+AC_REQUIRE([AM_MAKE_INCLUDE])dnl -+AC_REQUIRE([AM_DEP_TRACK])dnl ++and if that doesn't work, try + -+ifelse([$1], CC, [depcc="$CC" am_compiler_list=], -+ [$1], CXX, [depcc="$CXX" am_compiler_list=], -+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], -+ [$1], UPC, [depcc="$UPC" am_compiler_list=], -+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], -+ [depcc="$$1" am_compiler_list=]) ++ ./configure CC="cc -nodtk" + -+AC_CACHE_CHECK([dependency style of $depcc], -+ [am_cv_$1_dependencies_compiler_type], -+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then -+ # We make a subdir and do the tests there. Otherwise we can end up -+ # making bogus files that we don't know about and never remove. For -+ # instance it was reported that on HP-UX the gcc test will end up -+ # making a dummy file named `D' -- because `-MD' means `put the output -+ # in D'. -+ mkdir conftest.dir -+ # Copy depcomp to subdir because otherwise we won't find it if we're -+ # using a relative directory. -+ cp "$am_depcomp" conftest.dir -+ cd conftest.dir -+ # We will build objects and dependencies in a subdirectory because -+ # it helps to detect inapplicable dependency modes. For instance -+ # both Tru64's cc and ICC support -MD to output dependencies as a -+ # side effect of compilation, but ICC will put the dependencies in -+ # the current directory while Tru64 will put them in the object -+ # directory. -+ mkdir sub ++ On Solaris, don't put `/usr/ucb' early in your `PATH'. This ++directory contains several dysfunctional programs; working variants of ++these programs are available in `/usr/bin'. So, if you need `/usr/ucb' ++in your `PATH', put it _after_ `/usr/bin'. + -+ am_cv_$1_dependencies_compiler_type=none -+ if test "$am_compiler_list" = ""; then -+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` -+ fi -+ am__universal=false -+ m4_case([$1], [CC], -+ [case " $depcc " in #( -+ *\ -arch\ *\ -arch\ *) am__universal=true ;; -+ esac], -+ [CXX], -+ [case " $depcc " in #( -+ *\ -arch\ *\ -arch\ *) am__universal=true ;; -+ esac]) ++ On Haiku, software installed for all users goes in `/boot/common', ++not `/usr/local'. It is recommended to use the following options: + -+ for depmode in $am_compiler_list; do -+ # Setup a source with many dependencies, because some compilers -+ # like to wrap large dependency lists on column 80 (with \), and -+ # we should not choose a depcomp mode which is confused by this. -+ # -+ # We need to recreate these files for each test, as the compiler may -+ # overwrite some of them when testing with obscure command lines. -+ # This happens at least with the AIX C compiler. -+ : > sub/conftest.c -+ for i in 1 2 3 4 5 6; do -+ echo '#include "conftst'$i'.h"' >> sub/conftest.c -+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with -+ # Solaris 8's {/usr,}/bin/sh. -+ touch sub/conftst$i.h -+ done -+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ./configure --prefix=/boot/common + -+ # We check with `-c' and `-o' for the sake of the "dashmstdout" -+ # mode. It turns out that the SunPro C++ compiler does not properly -+ # handle `-M -o', and we need to detect this. Also, some Intel -+ # versions had trouble with output in subdirs -+ am__obj=sub/conftest.${OBJEXT-o} -+ am__minus_obj="-o $am__obj" -+ case $depmode in -+ gcc) -+ # This depmode causes a compiler race in universal mode. -+ test "$am__universal" = false || continue -+ ;; -+ nosideeffect) -+ # after this tag, mechanisms are not by side-effect, so they'll -+ # only be used when explicitly requested -+ if test "x$enable_dependency_tracking" = xyes; then -+ continue -+ else -+ break -+ fi -+ ;; -+ msvisualcpp | msvcmsys) -+ # This compiler won't grok `-c -o', but also, the minuso test has -+ # not run yet. These depmodes are late enough in the game, and -+ # so weak that their functioning should not be impacted. -+ am__obj=conftest.${OBJEXT-o} -+ am__minus_obj= -+ ;; -+ none) break ;; -+ esac -+ if depmode=$depmode \ -+ source=sub/conftest.c object=$am__obj \ -+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ -+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ -+ >/dev/null 2>conftest.err && -+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && -+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && -+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 && -+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then -+ # icc doesn't choke on unknown options, it will just issue warnings -+ # or remarks (even with -Werror). So we grep stderr for any message -+ # that says an option was ignored or not supported. -+ # When given -MP, icc 7.0 and 7.1 complain thusly: -+ # icc: Command line warning: ignoring option '-M'; no argument required -+ # The diagnosis changed in icc 8.0: -+ # icc: Command line remark: option '-MP' not supported -+ if (grep 'ignoring option' conftest.err || -+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else -+ am_cv_$1_dependencies_compiler_type=$depmode -+ break -+ fi -+ fi -+ done -+ -+ cd .. -+ rm -rf conftest.dir -+else -+ am_cv_$1_dependencies_compiler_type=none -+fi -+]) -+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -+AM_CONDITIONAL([am__fastdep$1], [ -+ test "x$enable_dependency_tracking" != xno \ -+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -+]) -+ -+ -+# AM_SET_DEPDIR -+# ------------- -+# Choose a directory name for dependency files. -+# This macro is AC_REQUIREd in _AM_DEPENDENCIES -+AC_DEFUN([AM_SET_DEPDIR], -+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -+]) -+ -+ -+# AM_DEP_TRACK -+# ------------ -+AC_DEFUN([AM_DEP_TRACK], -+[AC_ARG_ENABLE(dependency-tracking, -+[ --disable-dependency-tracking speeds up one-time build -+ --enable-dependency-tracking do not reject slow dependency extractors]) -+if test "x$enable_dependency_tracking" != xno; then -+ am_depcomp="$ac_aux_dir/depcomp" -+ AMDEPBACKSLASH='\' -+fi -+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -+AC_SUBST([AMDEPBACKSLASH])dnl -+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -+]) -+ -+# Generate code to set up dependency tracking. -*- Autoconf -*- + Specifying the System Type + ========================== + +-There may be some features `configure' cannot figure out automatically, +-but needs to determine by the type of machine the package will run on. +-Usually, assuming the package is built to be run on the _same_ +-architectures, `configure' can figure that out, but if it prints a +-message saying it cannot guess the machine type, give it the ++ There may be some features `configure' cannot figure out ++automatically, but needs to determine by the type of machine the package ++will run on. Usually, assuming the package is built to be run on the ++_same_ architectures, `configure' can figure that out, but if it prints ++a message saying it cannot guess the machine type, give it the + `--build=TYPE' option. TYPE can either be a short name for the system + type, such as `sun4', or a canonical name which has the form: + +@@ -152,14 +262,15 @@ + + where SYSTEM can have one of these forms: + +- OS KERNEL-OS ++ OS ++ KERNEL-OS + + See the file `config.sub' for the possible values of each field. If + `config.sub' isn't included in this package, then this package doesn't + need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +-use the `--target=TYPE' option to select the type of system they will ++use the option `--target=TYPE' to select the type of system they will + produce code for. + + If you want to _use_ a cross compiler, that generates code for a +@@ -170,9 +281,9 @@ + Sharing Defaults + ================ + +-If you want to set default values for `configure' scripts to share, you +-can create a site shell script called `config.site' that gives default +-values for variables like `CC', `cache_file', and `prefix'. ++ If you want to set default values for `configure' scripts to share, ++you can create a site shell script called `config.site' that gives ++default values for variables like `CC', `cache_file', and `prefix'. + `configure' looks for `PREFIX/share/config.site' if it exists, then + `PREFIX/etc/config.site' if it exists. Or, you can set the + `CONFIG_SITE' environment variable to the location of the site script. +@@ -181,7 +292,7 @@ + Defining Variables + ================== + +-Variables not defined in a site shell script can be set in the ++ Variables not defined in a site shell script can be set in the + environment passed to `configure'. However, some packages may run + configure again during the build, and the customized values of these + variables may be lost. In order to avoid this problem, you should set +@@ -189,17 +300,30 @@ + + ./configure CC=/usr/local2/bin/gcc + +-will cause the specified gcc to be used as the C compiler (unless it is ++causes the specified `gcc' to be used as the C compiler (unless it is + overridden in the site shell script). + ++Unfortunately, this technique does not work for `CONFIG_SHELL' due to ++an Autoconf bug. Until the bug is fixed you can use this workaround: + -+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. ++ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + -+#serial 5 + `configure' Invocation + ====================== + +-`configure' recognizes the following options to control how it operates. ++ `configure' recognizes the following options to control how it ++operates. + + `--help' + `-h' +- Print a summary of the options to `configure', and exit. ++ Print a summary of all of the options to `configure', and exit. + -+# _AM_OUTPUT_DEPENDENCY_COMMANDS -+# ------------------------------ -+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -+[{ -+ # Autoconf 2.62 quotes --file arguments for eval, but not when files -+ # are listed without --file. Let's play safe and only enable the eval -+ # if we detect the quoting. -+ case $CONFIG_FILES in -+ *\'*) eval set x "$CONFIG_FILES" ;; -+ *) set x $CONFIG_FILES ;; -+ esac -+ shift -+ for mf -+ do -+ # Strip MF so we end up with the name of the file. -+ mf=`echo "$mf" | sed -e 's/:.*$//'` -+ # Check whether this is an Automake generated Makefile or not. -+ # We used to match only the files named `Makefile.in', but -+ # some people rename them; so instead we look at the file content. -+ # Grep'ing the first line is not enough: some people post-process -+ # each Makefile.in and add a new line on top of each file to say so. -+ # Grep'ing the whole file is not good either: AIX grep has a line -+ # limit of 2048, but all sed's we know have understand at least 4000. -+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then -+ dirpart=`AS_DIRNAME("$mf")` -+ else -+ continue -+ fi -+ # Extract the definition of DEPDIR, am__include, and am__quote -+ # from the Makefile without running `make'. -+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` -+ test -z "$DEPDIR" && continue -+ am__include=`sed -n 's/^am__include = //p' < "$mf"` -+ test -z "am__include" && continue -+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` -+ # When using ansi2knr, U may be empty or an underscore; expand it -+ U=`sed -n 's/^U = //p' < "$mf"` -+ # Find all dependency output files, they are included files with -+ # $(DEPDIR) in their names. We invoke sed twice because it is the -+ # simplest approach to changing $(DEPDIR) to its actual value in the -+ # expansion. -+ for file in `sed -n " -+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ -+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do -+ # Make sure the directory exists. -+ test -f "$dirpart/$file" && continue -+ fdir=`AS_DIRNAME(["$file"])` -+ AS_MKDIR_P([$dirpart/$fdir]) -+ # echo "creating $dirpart/$file" -+ echo '# dummy' > "$dirpart/$file" -+ done -+ done -+} -+])# _AM_OUTPUT_DEPENDENCY_COMMANDS ++`--help=short' ++`--help=recursive' ++ Print a summary of the options unique to this package's ++ `configure', and exit. The `short' variant lists options used ++ only in the top level, while the `recursive' variant lists options ++ also present in any nested packages. + + `--version' + `-V' +@@ -226,6 +350,16 @@ + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + ++`--prefix=DIR' ++ Use DIR as the installation prefix. *note Installation Names:: ++ for more details, including other options available for fine-tuning ++ the installation locations. + ++`--no-create' ++`-n' ++ Run the configure checks, but stop before creating any output ++ files. + -+# AM_OUTPUT_DEPENDENCY_COMMANDS -+# ----------------------------- -+# This macro should only be invoked once -- use via AC_REQUIRE. -+# -+# This code is only required when automatic dependency tracking -+# is enabled. FIXME. This creates each `.P' file that we will -+# need in order to bootstrap the dependency handling code. -+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -+[AC_CONFIG_COMMANDS([depfiles], -+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], -+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -+]) + `configure' also accepts some other, not widely useful, options. Run + `configure --help' for more details. + +diff -Nur tslib-1.0.orig/Makefile.in tslib-1.0/Makefile.in +--- tslib-1.0.orig/Makefile.in 1970-01-01 01:00:00.000000000 +0100 ++++ tslib-1.0/Makefile.in 2010-07-29 13:39:16.000000000 +0200 +@@ -0,0 +1,800 @@ ++# Makefile.in generated by automake 1.11.1 from Makefile.am. ++# @configure_input@ + -+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, ++# Inc. ++# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + -+# serial 8 -+ -+# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without ++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A ++# PARTICULAR PURPOSE. + -+# Do all the work for Automake. -*- Autoconf -*- ++@SET_MAKE@ + -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# serial 16 -+ -+# This macro actually does too much. Some checks are only needed if -+# your package does certain things. But this isn't really a big deal. -+ -+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -+# AM_INIT_AUTOMAKE([OPTIONS]) -+# ----------------------------------------------- -+# The call with PACKAGE and VERSION arguments is the old style -+# call (pre autoconf-2.50), which is being phased out. PACKAGE -+# and VERSION should now be passed to AC_INIT and removed from -+# the call to AM_INIT_AUTOMAKE. -+# We support both call styles for the transition. After -+# the next Automake release, Autoconf can make the AC_INIT -+# arguments mandatory, and then we can depend on a new Autoconf -+# release and drop the old call support. -+AC_DEFUN([AM_INIT_AUTOMAKE], -+[AC_PREREQ([2.62])dnl -+dnl Autoconf wants to disallow AM_ names. We explicitly allow -+dnl the ones we care about. -+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -+AC_REQUIRE([AC_PROG_INSTALL])dnl -+if test "`cd $srcdir && pwd`" != "`pwd`"; then -+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output -+ # is not polluted with repeated "-I." -+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl -+ # test to see if srcdir already configured -+ if test -f $srcdir/config.status; then -+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -+ fi -+fi -+ -+# test whether we have cygpath -+if test -z "$CYGPATH_W"; then -+ if (cygpath --version) >/dev/null 2>/dev/null; then -+ CYGPATH_W='cygpath -w' -+ else -+ CYGPATH_W=echo -+ fi -+fi -+AC_SUBST([CYGPATH_W]) -+ -+# Define the identity of the package. -+dnl Distinguish between old-style and new-style calls. -+m4_ifval([$2], -+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl -+ AC_SUBST([PACKAGE], [$1])dnl -+ AC_SUBST([VERSION], [$2])], -+[_AM_SET_OPTIONS([$1])dnl -+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, -+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl -+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl -+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl -+ -+_AM_IF_OPTION([no-define],, -+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) -+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl -+ -+# Some tools Automake needs. -+AC_REQUIRE([AM_SANITY_CHECK])dnl -+AC_REQUIRE([AC_ARG_PROGRAM])dnl -+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -+AM_MISSING_PROG(AUTOCONF, autoconf) -+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -+AM_MISSING_PROG(AUTOHEADER, autoheader) -+AM_MISSING_PROG(MAKEINFO, makeinfo) -+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -+AC_REQUIRE([AM_PROG_MKDIR_P])dnl -+# We need awk for the "check" target. The system "awk" is bad on -+# some platforms. -+AC_REQUIRE([AC_PROG_AWK])dnl -+AC_REQUIRE([AC_PROG_MAKE_SET])dnl -+AC_REQUIRE([AM_SET_LEADING_DOT])dnl -+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], -+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], -+ [_AM_PROG_TAR([v7])])]) -+_AM_IF_OPTION([no-dependencies],, -+[AC_PROVIDE_IFELSE([AC_PROG_CC], -+ [_AM_DEPENDENCIES(CC)], -+ [define([AC_PROG_CC], -+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -+AC_PROVIDE_IFELSE([AC_PROG_CXX], -+ [_AM_DEPENDENCIES(CXX)], -+ [define([AC_PROG_CXX], -+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -+AC_PROVIDE_IFELSE([AC_PROG_OBJC], -+ [_AM_DEPENDENCIES(OBJC)], -+ [define([AC_PROG_OBJC], -+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -+]) -+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl -+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the -+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro -+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. -+AC_CONFIG_COMMANDS_PRE(dnl -+[m4_provide_if([_AM_COMPILER_EXEEXT], -+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl -+]) -+ -+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -+dnl mangled by Autoconf and run in a shell conditional statement. -+m4_define([_AC_COMPILER_EXEEXT], -+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) -+ -+ -+# When config.status generates a header, we must update the stamp-h file. -+# This file resides in the same directory as the config header -+# that is generated. The stamp files are numbered to have different names. -+ -+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -+# loop where config.status creates the headers, so we can generate -+# our stamp files there. -+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -+[# Compute $1's index in $config_headers. -+_am_arg=$1 -+_am_stamp_count=1 -+for _am_header in $config_headers :; do -+ case $_am_header in -+ $_am_arg | $_am_arg:* ) -+ break ;; -+ * ) -+ _am_stamp_count=`expr $_am_stamp_count + 1` ;; -+ esac -+done -+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -+ -+# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. ++# tslib/Makefile.am +# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# AM_PROG_INSTALL_SH -+# ------------------ -+# Define $install_sh. -+AC_DEFUN([AM_PROG_INSTALL_SH], -+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -+if test x"${install_sh}" != xset; then -+ case $am_aux_dir in -+ *\ * | *\ *) -+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; -+ *) -+ install_sh="\${SHELL} $am_aux_dir/install-sh" -+ esac -+fi -+AC_SUBST(install_sh)]) -+ -+# Copyright (C) 2003, 2005 Free Software Foundation, Inc. ++# Copyright (C) 2001 Russell King. +# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# serial 2 -+ -+# Check whether the underlying file-system supports filenames -+# with a leading dot. For instance MS-DOS doesn't. -+AC_DEFUN([AM_SET_LEADING_DOT], -+[rm -rf .tst 2>/dev/null -+mkdir .tst 2>/dev/null -+if test -d .tst; then -+ am__leading_dot=. -+else -+ am__leading_dot=_ -+fi -+rmdir .tst 2>/dev/null -+AC_SUBST([am__leading_dot])]) -+ -+# Check to see how 'make' treats includes. -*- Autoconf -*- -+ -+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. ++# This file is placed under the LGPL. Please see the file ++# COPYING for more details. +# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# serial 4 -+ -+# AM_MAKE_INCLUDE() -+# ----------------- -+# Check to see how make treats includes. -+AC_DEFUN([AM_MAKE_INCLUDE], -+[am_make=${MAKE-make} -+cat > confinc << 'END' -+am__doit: -+ @echo this is the am__doit target -+.PHONY: am__doit -+END -+# If we don't find an include directive, just comment out the code. -+AC_MSG_CHECKING([for style of include used by $am_make]) -+am__include="#" -+am__quote= -+_am_result=none -+# First try GNU make style include. -+echo "include confinc" > confmf -+# Ignore all kinds of additional output from `make'. -+case `$am_make -s -f confmf 2> /dev/null` in #( -+*the\ am__doit\ target*) -+ am__include=include -+ am__quote= -+ _am_result=GNU -+ ;; -+esac -+# Now try BSD make style include. -+if test "$am__include" = "#"; then -+ echo '.include "confinc"' > confmf -+ case `$am_make -s -f confmf 2> /dev/null` in #( -+ *the\ am__doit\ target*) -+ am__include=.include -+ am__quote="\"" -+ _am_result=BSD -+ ;; -+ esac -+fi -+AC_SUBST([am__include]) -+AC_SUBST([am__quote]) -+AC_MSG_RESULT([$_am_result]) -+rm -f confinc confmf -+]) -+ -+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -+ -+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 -+# Free Software Foundation, Inc. ++# $Id: Makefile.am,v 1.3 2005/02/28 18:56:09 kergoth Exp $ +# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. -+ -+# serial 6 -+ -+# AM_MISSING_PROG(NAME, PROGRAM) -+# ------------------------------ -+AC_DEFUN([AM_MISSING_PROG], -+[AC_REQUIRE([AM_MISSING_HAS_RUN]) -+$1=${$1-"${am_missing_run}$2"} -+AC_SUBST($1)]) -+ + -+# AM_MISSING_HAS_RUN -+# ------------------ -+# Define MISSING if not defined so far and test if it supports --run. -+# If it does, set am_missing_run to use it, otherwise, to nothing. -+AC_DEFUN([AM_MISSING_HAS_RUN], -+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -+AC_REQUIRE_AUX_FILE([missing])dnl -+if test x"${MISSING+set}" != xset; then -+ case $am_aux_dir in -+ *\ * | *\ *) -+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; -+ *) -+ MISSING="\${SHELL} $am_aux_dir/missing" ;; -+ esac -+fi -+# Use eval to expand $SHELL -+if eval "$MISSING --run true"; then -+ am_missing_run="$MISSING --run " -+else -+ am_missing_run= -+ AC_MSG_WARN([`missing' script is too old or missing]) -+fi -+]) -+ -+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. ++VPATH = @srcdir@ ++pkgdatadir = $(datadir)/@PACKAGE@ ++pkgincludedir = $(includedir)/@PACKAGE@ ++pkglibdir = $(libdir)/@PACKAGE@ ++pkglibexecdir = $(libexecdir)/@PACKAGE@ ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) ++NORMAL_INSTALL = : ++PRE_INSTALL = : ++POST_INSTALL = : ++NORMAL_UNINSTALL = : ++PRE_UNINSTALL = : ++POST_UNINSTALL = : ++build_triplet = @build@ ++host_triplet = @host@ ++subdir = . ++DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ ++ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ ++ $(srcdir)/tslib.pc.in $(top_srcdir)/configure AUTHORS COPYING \ ++ ChangeLog INSTALL NEWS config.guess config.sub depcomp \ ++ install-sh ltmain.sh missing ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/m4/internal/libtool.m4 \ ++ $(top_srcdir)/m4/internal/ltoptions.m4 \ ++ $(top_srcdir)/m4/internal/ltsugar.m4 \ ++ $(top_srcdir)/m4/internal/ltversion.m4 \ ++ $(top_srcdir)/m4/internal/lt~obsolete.m4 \ ++ $(top_srcdir)/m4/internal/visibility.m4 \ ++ $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ ++ configure.lineno config.status.lineno ++mkinstalldirs = $(install_sh) -d ++CONFIG_HEADER = config.h ++CONFIG_CLEAN_FILES = ++CONFIG_CLEAN_VPATH_FILES = ++SOURCES = ++DIST_SOURCES = ++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ ++ html-recursive info-recursive install-data-recursive \ ++ install-dvi-recursive install-exec-recursive \ ++ install-html-recursive install-info-recursive \ ++ install-pdf-recursive install-ps-recursive install-recursive \ ++ installcheck-recursive installdirs-recursive pdf-recursive \ ++ ps-recursive uninstall-recursive ++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; ++am__vpath_adj = case $$p in \ ++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ++ *) f=$$p;; \ ++ esac; ++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; ++am__install_max = 40 ++am__nobase_strip_setup = \ ++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` ++am__nobase_strip = \ ++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" ++am__nobase_list = $(am__nobase_strip_setup); \ ++ for p in $$list; do echo "$$p $$p"; done | \ ++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ ++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ ++ if (++n[$$2] == $(am__install_max)) \ ++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ ++ END { for (dir in files) print dir, files[dir] }' ++am__base_list = \ ++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ ++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' ++am__installdirs = "$(DESTDIR)$(pkgconfigdir)" ++DATA = $(pkgconfig_DATA) ++RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ ++ distclean-recursive maintainer-clean-recursive ++AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ ++ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ ++ distdir dist dist-all distcheck ++ETAGS = etags ++CTAGS = ctags ++DIST_SUBDIRS = $(SUBDIRS) ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++distdir = $(PACKAGE)-$(VERSION) ++top_distdir = $(distdir) ++am__remove_distdir = \ ++ { test ! -d "$(distdir)" \ ++ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ ++ && rm -fr "$(distdir)"; }; } ++am__relativize = \ ++ dir0=`pwd`; \ ++ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ ++ sed_rest='s,^[^/]*/*,,'; \ ++ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ ++ sed_butlast='s,/*[^/]*$$,,'; \ ++ while test -n "$$dir1"; do \ ++ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ ++ if test "$$first" != "."; then \ ++ if test "$$first" = ".."; then \ ++ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ ++ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ ++ else \ ++ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ ++ if test "$$first2" = "$$first"; then \ ++ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ ++ else \ ++ dir2="../$$dir2"; \ ++ fi; \ ++ dir0="$$dir0"/"$$first"; \ ++ fi; \ ++ fi; \ ++ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ ++ done; \ ++ reldir="$$dir2" ++DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 ++GZIP_ENV = --best ++distuninstallcheck_listfiles = find . -type f -print ++distcleancheck_listfiles = find . -type f -print ++ACLOCAL = @ACLOCAL@ ++ALLOCA = @ALLOCA@ ++AMTAR = @AMTAR@ ++AR = @AR@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ ++CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ ++CXX = @CXX@ ++CXXCPP = @CXXCPP@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEBUGFLAGS = @DEBUGFLAGS@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ ++DSYMUTIL = @DSYMUTIL@ ++DUMPBIN = @DUMPBIN@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ ++EGREP = @EGREP@ ++EXEEXT = @EXEEXT@ ++FGREP = @FGREP@ ++GREP = @GREP@ ++INSTALL = @INSTALL@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LD = @LD@ ++LDFLAGS = @LDFLAGS@ ++LIBFLAGS = @LIBFLAGS@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ ++LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ ++LN_S = @LN_S@ ++LTLIBOBJS = @LTLIBOBJS@ ++LT_AGE = @LT_AGE@ ++LT_CURRENT = @LT_CURRENT@ ++LT_RELEASE = @LT_RELEASE@ ++LT_REVISION = @LT_REVISION@ ++MAKEINFO = @MAKEINFO@ ++MKDIR_P = @MKDIR_P@ ++NM = @NM@ ++NMEDIT = @NMEDIT@ ++OBJDUMP = @OBJDUMP@ ++OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ ++PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_DESCRIPTION = @PACKAGE_DESCRIPTION@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_URL = @PACKAGE_URL@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ ++PLUGIN_DIR = @PLUGIN_DIR@ ++RANLIB = @RANLIB@ ++SED = @SED@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ ++STRIP = @STRIP@ ++TS_CONF = @TS_CONF@ ++VERSION = @VERSION@ ++VIS_CFLAGS = @VIS_CFLAGS@ ++abs_builddir = @abs_builddir@ ++abs_srcdir = @abs_srcdir@ ++abs_top_builddir = @abs_top_builddir@ ++abs_top_srcdir = @abs_top_srcdir@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++builddir = @builddir@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++srcdir = @srcdir@ ++sysconfdir = @sysconfdir@ ++target_alias = @target_alias@ ++top_build_prefix = @top_build_prefix@ ++top_builddir = @top_builddir@ ++top_srcdir = @top_srcdir@ ++SUBDIRS = etc src plugins tests ++EXTRA_DIST = autogen.sh ++ACLOCAL_AMFLAGS = -I m4/internal -I m4/external ++AUTOMAKE_OPTIONS = 1.6 ++pkgconfigdir = $(libdir)/pkgconfig ++pkgconfig_DATA = $(PACKAGE)-$(LT_RELEASE).pc ++all: config.h ++ $(MAKE) $(AM_MAKEFLAGS) all-recursive + -+# AM_PROG_MKDIR_P -+# --------------- -+# Check for `mkdir -p'. -+AC_DEFUN([AM_PROG_MKDIR_P], -+[AC_PREREQ([2.60])dnl -+AC_REQUIRE([AC_PROG_MKDIR_P])dnl -+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -+dnl while keeping a definition of mkdir_p for backward compatibility. -+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -+dnl Makefile.ins that do not define MKDIR_P, so we do our own -+dnl adjustment using top_builddir (which is defined more often than -+dnl MKDIR_P). -+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -+case $mkdir_p in -+ [[\\/$]]* | ?:[[\\/]]*) ;; -+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -+esac -+]) ++.SUFFIXES: ++am--refresh: ++ @: ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ ++ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ ++ $(am__cd) $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ echo ' $(SHELL) ./config.status'; \ ++ $(SHELL) ./config.status;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ ++ esac; + -+# Helper functions for option handling. -*- Autoconf -*- ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ $(SHELL) ./config.status --recheck + -+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. ++$(top_srcdir)/configure: $(am__configure_deps) ++ $(am__cd) $(srcdir) && $(AUTOCONF) ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ++$(am__aclocal_m4_deps): + -+# serial 4 ++config.h: stamp-h1 ++ @if test ! -f $@; then \ ++ rm -f stamp-h1; \ ++ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ ++ else :; fi + -+# _AM_MANGLE_OPTION(NAME) -+# ----------------------- -+AC_DEFUN([_AM_MANGLE_OPTION], -+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status ++ @rm -f stamp-h1 ++ cd $(top_builddir) && $(SHELL) ./config.status config.h ++$(srcdir)/config.h.in: $(am__configure_deps) ++ ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) ++ rm -f stamp-h1 ++ touch $@ + -+# _AM_SET_OPTION(NAME) -+# ------------------------------ -+# Set option NAME. Presently that only means defining a flag for this option. -+AC_DEFUN([_AM_SET_OPTION], -+[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) ++distclean-hdr: ++ -rm -f config.h stamp-h1 + -+# _AM_SET_OPTIONS(OPTIONS) -+# ---------------------------------- -+# OPTIONS is a space-separated list of Automake options. -+AC_DEFUN([_AM_SET_OPTIONS], -+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++mostlyclean-libtool: ++ -rm -f *.lo + -+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -+# ------------------------------------------- -+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -+AC_DEFUN([_AM_IF_OPTION], -+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++clean-libtool: ++ -rm -rf .libs _libs + -+# Check to make sure that the build environment is sane. -*- Autoconf -*- ++distclean-libtool: ++ -rm -f libtool config.lt ++install-pkgconfigDATA: $(pkgconfig_DATA) ++ @$(NORMAL_INSTALL) ++ test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" ++ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ ++ for p in $$list; do \ ++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ++ echo "$$d$$p"; \ ++ done | $(am__base_list) | \ ++ while read files; do \ ++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ ++ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ ++ done + -+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 -+# Free Software Foundation, Inc. -+# -+# This file is free software; the Free Software Foundation -+# gives unlimited permission to copy and/or distribute it, -+# with or without modifications, as long as this notice is preserved. ++uninstall-pkgconfigDATA: ++ @$(NORMAL_UNINSTALL) ++ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ ++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ ++ test -n "$$files" || exit 0; \ ++ echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ ++ cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files + -+# serial 5 ++# This directory's subdirectories are mostly independent; you can cd ++# into them and run `make' without going through this Makefile. ++# To change the values of `make' variables: instead of editing Makefiles, ++# (1) if the variable is set in `config.status', edit `config.status' ++# (which will cause the Makefiles to be regenerated when you run `make'); ++# (2) otherwise, pass the desired values on the `make' command line. ++$(RECURSIVE_TARGETS): ++ @fail= failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ ++ dot_seen=no; \ ++ target=`echo $@ | sed s/-recursive//`; \ ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ echo "Making $$target in $$subdir"; \ ++ if test "$$subdir" = "."; then \ ++ dot_seen=yes; \ ++ local_target="$$target-am"; \ ++ else \ ++ local_target="$$target"; \ ++ fi; \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ || eval $$failcom; \ ++ done; \ ++ if test "$$dot_seen" = "no"; then \ ++ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ ++ fi; test -z "$$fail" + -+# AM_SANITY_CHECK -+# --------------- -+AC_DEFUN([AM_SANITY_CHECK], -+[AC_MSG_CHECKING([whether build environment is sane]) -+# Just in case -+sleep 1 -+echo timestamp > conftest.file -+# Reject unsafe characters in $srcdir or the absolute working directory -+# name. Accept space and tab only in the latter. -+am_lf=' -+' -+case `pwd` in -+ *[[\\\"\#\$\&\'\`$am_lf]]*) -+ AC_MSG_ERROR([unsafe absolute working directory name]);; -+esac -+case $srcdir in -+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) -+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; -+esac ++$(RECURSIVE_CLEAN_TARGETS): ++ @fail= failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ ++ dot_seen=no; \ ++ case "$@" in \ ++ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ ++ *) list='$(SUBDIRS)' ;; \ ++ esac; \ ++ rev=''; for subdir in $$list; do \ ++ if test "$$subdir" = "."; then :; else \ ++ rev="$$subdir $$rev"; \ ++ fi; \ ++ done; \ ++ rev="$$rev ."; \ ++ target=`echo $@ | sed s/-recursive//`; \ ++ for subdir in $$rev; do \ ++ echo "Making $$target in $$subdir"; \ ++ if test "$$subdir" = "."; then \ ++ local_target="$$target-am"; \ ++ else \ ++ local_target="$$target"; \ ++ fi; \ ++ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ++ || eval $$failcom; \ ++ done && test -z "$$fail" ++tags-recursive: ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ ++ done ++ctags-recursive: ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ done + -+# Do `set' in a subshell so we don't clobber the current shell's -+# arguments. Must try -L first in case configure is actually a -+# symlink; some systems play weird games with the mod time of symlinks -+# (eg FreeBSD returns the mod time of the symlink's containing -+# directory). -+if ( -+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` -+ if test "$[*]" = "X"; then -+ # -L didn't work. -+ set X `ls -t "$srcdir/configure" conftest.file` -+ fi -+ rm -f conftest.file -+ if test "$[*]" != "X $srcdir/configure conftest.file" \ -+ && test "$[*]" != "X conftest.file $srcdir/configure"; then ++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ ++ END { if (nonempty) { for (i in files) print i; }; }'`; \ ++ mkid -fID $$unique ++tags: TAGS + -+ # If neither matched, then we have a broken ls. This can happen -+ # if, for instance, CONFIG_SHELL is bash and it inherits a -+ # broken ls alias from the environment. This has actually -+ # happened.