From 0e930c133951dffe8c933fe02f67e72fec57dc8d Mon Sep 17 00:00:00 2001 From: Waldemar Brodkorb Date: Wed, 24 Aug 2011 06:08:24 +0200 Subject: sync patch with OpenWrt, combine both targets (rb411/rb433) --- mk/rootfs.mk | 2 +- package/adkinstall/Makefile | 5 +- target/linux/Config.in | 1 + target/linux/config/Config.in.flash | 3 +- target/linux/config/Config.in.netdevice | 3 +- target/linux/config/Config.in.spi | 14 + target/linux/patches/2.6.39/rb4xx.patch | 36530 ++++++++++++++++++----------- target/mips/Makefile | 6 +- target/mips/kernel.config | 212 +- target/mips/sys-available/mikrotik-rb411 | 13 - target/mips/sys-available/mikrotik-rb433 | 13 - target/mips/sys-available/mikrotik-rb4xx | 15 + 12 files changed, 23402 insertions(+), 13415 deletions(-) create mode 100644 target/linux/config/Config.in.spi delete mode 100644 target/mips/sys-available/mikrotik-rb411 delete mode 100644 target/mips/sys-available/mikrotik-rb433 create mode 100644 target/mips/sys-available/mikrotik-rb4xx diff --git a/mk/rootfs.mk b/mk/rootfs.mk index 241a237fa..5080944e6 100644 --- a/mk/rootfs.mk +++ b/mk/rootfs.mk @@ -17,7 +17,7 @@ ROOTFS:= root=/dev/sda2 MTDDEV:= root=/dev/mtdblock1 endif -ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB433),y) +ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB4XX),y) MTDDEV:= root=/dev/mtdblock2 endif diff --git a/package/adkinstall/Makefile b/package/adkinstall/Makefile index 6aae012f8..a4ab0d8eb 100644 --- a/package/adkinstall/Makefile +++ b/package/adkinstall/Makefile @@ -36,10 +36,7 @@ else ifeq ($(ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20),y) else ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y) ${INSTALL_BIN} ./src/adkinstall.yeelong \ $(IDIR_ADKINSTALL)/sbin/adkinstall -else ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB411),y) - ${INSTALL_BIN} ./src/adkinstall.rb4xx \ - $(IDIR_ADKINSTALL)/sbin/adkinstall -else ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB433),y) +else ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB4XX),y) ${INSTALL_BIN} ./src/adkinstall.rb4xx \ $(IDIR_ADKINSTALL)/sbin/adkinstall else diff --git a/target/linux/Config.in b/target/linux/Config.in index cf4890059..7b52a3003 100644 --- a/target/linux/Config.in +++ b/target/linux/Config.in @@ -20,5 +20,6 @@ source target/linux/config/Config.in.misc source target/linux/config/Config.in.mips source target/linux/config/Config.in.lib source target/linux/config/Config.in.pm +source target/linux/config/Config.in.spi source target/linux/config/Config.in.kvm source target/linux/config/Config.in.debug diff --git a/target/linux/config/Config.in.flash b/target/linux/config/Config.in.flash index 4d9bf6828..3e2898617 100644 --- a/target/linux/config/Config.in.flash +++ b/target/linux/config/Config.in.flash @@ -43,8 +43,7 @@ config ADK_KERNEL_MTD_CFI_ADV_OPTIONS config ADK_KERNEL_MTD_NAND_RB4XX boolean - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB411 - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB433 + default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX default n config ADK_KERNEL_MTD_AR7_PARTS diff --git a/target/linux/config/Config.in.netdevice b/target/linux/config/Config.in.netdevice index 1a84f6bcc..cd90f3af2 100644 --- a/target/linux/config/Config.in.netdevice +++ b/target/linux/config/Config.in.netdevice @@ -104,8 +104,7 @@ config ADK_KERNEL_AG71XX select ADK_KERNEL_NET_PCI select ADK_KERNEL_MII select ADK_KERNEL_NETDEV_1000 - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB411 - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB433 + default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX default n help diff --git a/target/linux/config/Config.in.spi b/target/linux/config/Config.in.spi new file mode 100644 index 000000000..a141f8231 --- /dev/null +++ b/target/linux/config/Config.in.spi @@ -0,0 +1,14 @@ +config ADK_KERNEL_SPI + boolean + +config ADK_KERNEL_SPI_AR71XX + select ADK_KERNEL_SPI + boolean + +config ADK_KERNEL_SPI_RB4XX + select ADK_KERNEL_SPI + boolean + +config ADK_KERNEL_SPI_RB4XX_CPLD + select ADK_KERNEL_SPI + boolean diff --git a/target/linux/patches/2.6.39/rb4xx.patch b/target/linux/patches/2.6.39/rb4xx.patch index 1739221bf..49fd204d7 100644 --- a/target/linux/patches/2.6.39/rb4xx.patch +++ b/target/linux/patches/2.6.39/rb4xx.patch @@ -1,548 +1,223 @@ -diff -Nur linux-2.6.39.orig/arch/mips/Kconfig linux-2.6.39/arch/mips/Kconfig ---- linux-2.6.39.orig/arch/mips/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/Kconfig 2011-05-27 14:36:50.000000000 +0200 -@@ -84,6 +84,23 @@ - help - Support for the Atheros AR71XX/AR724X/AR913X SoCs. - -+config ATHEROS_AR71XX -+ bool "Atheros AR71xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select MIPS_MACHINE -+ help -+ Support for Atheros AR71xx based boards. +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.39/arch/mips/ar71xx/ar71xx.c +--- linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/ar71xx.c 2011-08-24 02:41:55.227990426 +0200 +@@ -0,0 +1,230 @@ ++/* ++ * AR71xx SoC routines ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + - config BCM47XX - bool "Broadcom BCM47XX based boards" - select CEVT_R4K -@@ -740,6 +757,7 @@ - - source "arch/mips/alchemy/Kconfig" - source "arch/mips/ath79/Kconfig" -+source "arch/mips/ar71xx/Kconfig" - source "arch/mips/bcm63xx/Kconfig" - source "arch/mips/jazz/Kconfig" - source "arch/mips/jz4740/Kconfig" -diff -Nur linux-2.6.39.orig/arch/mips/Makefile linux-2.6.39/arch/mips/Makefile ---- linux-2.6.39.orig/arch/mips/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/Makefile 2011-05-27 14:36:50.000000000 +0200 -@@ -158,6 +158,13 @@ - endif - cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 - -+# -+# Atheros AR71xx -+# -+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ -+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx -+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 ++#include ++#include ++#include ++#include ++#include + - cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) - cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) - cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Kconfig linux-2.6.39/arch/mips/ar71xx/Kconfig ---- linux-2.6.39.orig/arch/mips/ar71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/Kconfig 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,264 @@ -+if ATHEROS_AR71XX ++#include + -+menu "Atheros AR71xx machine selection" ++static DEFINE_MUTEX(ar71xx_flash_mutex); ++static DEFINE_SPINLOCK(ar71xx_device_lock); + -+config AR71XX_MACH_AP81 -+ bool "Atheros AP81 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++void __iomem *ar71xx_ddr_base; ++EXPORT_SYMBOL_GPL(ar71xx_ddr_base); + -+config AR71XX_MACH_AP83 -+ bool "Atheros AP83 board support" -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++void __iomem *ar71xx_pll_base; ++EXPORT_SYMBOL_GPL(ar71xx_pll_base); + -+config AR71XX_MACH_DIR_600_A1 -+ bool "D-Link DIR-600 rev. A1 support" -+ select AR71XX_DEV_AP91_ETH -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_NVRAM -+ default n ++void __iomem *ar71xx_reset_base; ++EXPORT_SYMBOL_GPL(ar71xx_reset_base); + -+config AR71XX_MACH_DIR_615_C1 -+ bool "D-Link DIR-615 rev. C1 support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_NVRAM -+ default n ++void __iomem *ar71xx_gpio_base; ++EXPORT_SYMBOL_GPL(ar71xx_gpio_base); + -+config AR71XX_MACH_DIR_825_B1 -+ bool "D-Link DIR-825 rev. B1 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++void __iomem *ar71xx_usb_ctrl_base; ++EXPORT_SYMBOL_GPL(ar71xx_usb_ctrl_base); + -+config AR71XX_MACH_PB42 -+ bool "Atheros PB42 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ default n ++void ar71xx_device_stop(u32 mask) ++{ ++ unsigned long flags; ++ u32 mask_inv; ++ u32 t; + -+config AR71XX_MACH_PB44 -+ bool "Atheros PB44 board support" -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t | mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_PB92 -+ bool "Atheros PB92 board support" -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB9X_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); ++ t |= mask; ++ t &= ~mask_inv; ++ ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_AW_NR580 -+ bool "AzureWave AW-NR580 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ default n ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t | mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WZR_HP_G300NH -+ bool "Buffalo WZR-HP-G300NH board support" -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default y ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR933X_RESET_REG_RESET_MODULE, t | mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WP543 -+ bool "Compex WP543/WPJ543 board support" -+ select MYLOADER -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR934X_RESET_REG_RESET_MODULE, t | mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WRT160NL -+ bool "Linksys WRT160NL board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ select AR71XX_NVRAM -+ default n ++ default: ++ BUG(); ++ } ++} ++EXPORT_SYMBOL_GPL(ar71xx_device_stop); + -+config AR71XX_MACH_WRT400N -+ bool "Linksys WRT400N board support" -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n ++void ar71xx_device_start(u32 mask) ++{ ++ unsigned long flags; ++ u32 mask_inv; ++ u32 t; + -+config AR71XX_MACH_RB4XX -+ bool "MikroTik RouterBOARD 4xx series support" -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t & ~mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_RB750 -+ bool "MikroTik RouterBOARD 750 support" -+ select AR71XX_DEV_AP91_ETH -+ default n ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); ++ t &= ~mask; ++ t |= mask_inv; ++ ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WNDR3700 -+ bool "NETGEAR WNDR3700 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t & ~mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_WNR2000 -+ bool "NETGEAR WNR2000 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR933X_RESET_REG_RESET_MODULE, t & ~mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; + -+config AR71XX_MACH_MZK_W04NU -+ bool "Planex MZK-W04NU board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_MZK_W300NH -+ bool "Planex MZK-W300NH board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_NBG460N -+ bool "Zyxel NBG460N/550N/550NH board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR741ND -+ bool "TP-LINK TL-WR741ND support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP91_ETH -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR841N_V1 -+ bool "TP-LINK TL-WR841N v1 support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_DSA -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR941ND -+ bool "TP-LINK TL-WR941ND support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_DSA -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR1043ND -+ bool "TP-LINK TL-WR1043ND support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_TEW_632BRP -+ bool "TRENDnet TEW-632BRP support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR913X_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_NVRAM -+ default n -+ -+config AR71XX_MACH_UBNT -+ bool "Ubiquiti AR71xx based boards support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_USB -+ default n -+ -+endmenu -+ -+config AR71XX_DEV_M25P80 -+ def_bool n -+ -+config AR71XX_DEV_AP91_PCI -+ def_bool n -+ -+config AR71XX_DEV_AP91_ETH -+ def_bool n -+ -+config AR71XX_DEV_AP94_PCI -+ def_bool n -+ -+config AR71XX_DEV_AR913X_WMAC -+ def_bool n -+ -+config AR71XX_DEV_DSA -+ def_bool n -+ -+config AR71XX_DEV_GPIO_BUTTONS -+ def_bool n -+ -+config AR71XX_DEV_LEDS_GPIO -+ def_bool n -+ -+config AR71XX_DEV_PB42_PCI -+ def_bool n -+ -+config AR71XX_DEV_PB9X_PCI -+ def_bool n -+ -+config AR71XX_DEV_USB -+ def_bool n -+ -+config AR71XX_NVRAM -+ def_bool n -+ -+endif -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Makefile linux-2.6.39/arch/mips/ar71xx/Makefile ---- linux-2.6.39.orig/arch/mips/ar71xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/Makefile 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,54 @@ -+# -+# Makefile for the Atheros AR71xx SoC specific parts of the kernel -+# -+# Copyright (C) 2008-2009 Gabor Juhos -+# Copyright (C) 2008 Imre Kaloz -+# -+# This program is free software; you can redistribute it and/or modify it -+# under the terms of the GNU General Public License version 2 as published -+# by the Free Software Foundation. -+ -+obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o -+ -+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -+obj-$(CONFIG_PCI) += pci.o -+ -+obj-$(CONFIG_AR71XX_DEV_AP91_ETH) += dev-ap91-eth.o -+obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o -+obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o -+obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC) += dev-ar913x-wmac.o -+obj-$(CONFIG_AR71XX_DEV_DSA) += dev-dsa.o -+obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o -+obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO) += dev-leds-gpio.o -+obj-$(CONFIG_AR71XX_DEV_M25P80) += dev-m25p80.o -+obj-$(CONFIG_AR71XX_DEV_PB42_PCI) += dev-pb42-pci.o -+obj-$(CONFIG_AR71XX_DEV_PB9X_PCI) += dev-pb9x-pci.o -+obj-$(CONFIG_AR71XX_DEV_USB) += dev-usb.o -+ -+obj-$(CONFIG_AR71XX_NVRAM) += nvram.o -+ -+obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o -+obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o -+obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o -+obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o -+obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o -+obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o -+obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o -+obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o -+obj-$(CONFIG_AR71XX_MACH_NBG460N) += mach-nbg460n.o -+obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o -+obj-$(CONFIG_AR71XX_MACH_PB44) += mach-pb44.o -+obj-$(CONFIG_AR71XX_MACH_PB92) += mach-pb92.o -+obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o -+obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o -+obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o -+obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o -+obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o -+obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o -+obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o -+obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o -+obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.39/arch/mips/ar71xx/ar71xx.c ---- linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/ar71xx.c 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,177 @@ -+/* -+ * AR71xx SoC routines -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+ -+static DEFINE_MUTEX(ar71xx_flash_mutex); -+ -+void __iomem *ar71xx_ddr_base; -+EXPORT_SYMBOL_GPL(ar71xx_ddr_base); -+ -+void __iomem *ar71xx_pll_base; -+EXPORT_SYMBOL_GPL(ar71xx_pll_base); -+ -+void __iomem *ar71xx_reset_base; -+EXPORT_SYMBOL_GPL(ar71xx_reset_base); -+ -+void __iomem *ar71xx_gpio_base; -+EXPORT_SYMBOL_GPL(ar71xx_gpio_base); -+ -+void __iomem *ar71xx_usb_ctrl_base; -+EXPORT_SYMBOL_GPL(ar71xx_usb_ctrl_base); -+ -+void ar71xx_device_stop(u32 mask) -+{ -+ unsigned long flags; -+ u32 mask_inv; -+ u32 t; -+ -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); -+ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t | mask); -+ local_irq_restore(flags); -+ break; -+ -+ case AR71XX_SOC_AR7240: -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); -+ t |= mask; -+ t &= ~mask_inv; -+ ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); -+ local_irq_restore(flags); -+ break; -+ -+ case AR71XX_SOC_AR9130: -+ case AR71XX_SOC_AR9132: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); -+ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t | mask); -+ local_irq_restore(flags); ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); ++ ar71xx_reset_wr(AR934X_RESET_REG_RESET_MODULE, t & ~mask); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + default: + BUG(); + } +} -+EXPORT_SYMBOL_GPL(ar71xx_device_stop); ++EXPORT_SYMBOL_GPL(ar71xx_device_start); + -+void ar71xx_device_start(u32 mask) ++int ar71xx_device_stopped(u32 mask) +{ + unsigned long flags; -+ u32 mask_inv; + u32 t; + + switch (ar71xx_soc) { + case AR71XX_SOC_AR7130: + case AR71XX_SOC_AR7141: + case AR71XX_SOC_AR7161: -+ local_irq_save(flags); ++ spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); -+ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t & ~mask); -+ local_irq_restore(flags); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: -+ mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240; -+ local_irq_save(flags); ++ spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); -+ t &= ~mask; -+ t |= mask_inv; -+ ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t); -+ local_irq_restore(flags); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: -+ local_irq_save(flags); ++ spin_lock_irqsave(&ar71xx_device_lock, flags); + t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); -+ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t & ~mask); -+ local_irq_restore(flags); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; ++ ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR933X_RESET_REG_RESET_MODULE); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); ++ break; ++ ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ spin_lock_irqsave(&ar71xx_device_lock, flags); ++ t = ar71xx_reset_rr(AR934X_RESET_REG_RESET_MODULE); ++ spin_unlock_irqrestore(&ar71xx_device_lock, flags); + break; + + default: + BUG(); + } ++ ++ return ((t & mask) == mask); +} -+EXPORT_SYMBOL_GPL(ar71xx_device_start); ++EXPORT_SYMBOL_GPL(ar71xx_device_stopped); + -+int ar71xx_device_stopped(u32 mask) ++void ar71xx_ddr_flush(u32 reg) +{ -+ unsigned long flags; -+ u32 t; -+ -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE); -+ local_irq_restore(flags); -+ break; -+ -+ case AR71XX_SOC_AR7240: -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); -+ local_irq_restore(flags); -+ break; -+ -+ case AR71XX_SOC_AR9130: -+ case AR71XX_SOC_AR9132: -+ local_irq_save(flags); -+ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE); -+ local_irq_restore(flags); -+ break; -+ -+ default: -+ BUG(); -+ } -+ -+ return ((t & mask) == mask); -+} -+EXPORT_SYMBOL_GPL(ar71xx_device_stopped); -+ -+void ar71xx_ddr_flush(u32 reg) -+{ -+ ar71xx_ddr_wr(reg, 1); -+ while ((ar71xx_ddr_rr(reg) & 0x1)); ++ ar71xx_ddr_wr(reg, 1); ++ while ((ar71xx_ddr_rr(reg) & 0x1)) ++ ; + + ar71xx_ddr_wr(reg, 1); -+ while ((ar71xx_ddr_rr(reg) & 0x1)); ++ while ((ar71xx_ddr_rr(reg) & 0x1)) ++ ; +} +EXPORT_SYMBOL_GPL(ar71xx_ddr_flush); + @@ -557,111 +232,10 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.39/arch/mips/ar7 + mutex_unlock(&ar71xx_flash_mutex); +} +EXPORT_SYMBOL_GPL(ar71xx_flash_release); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-eth.c linux-2.6.39/arch/mips/ar71xx/dev-ap91-eth.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-eth.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-eth.c 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,70 @@ -+/* -+ * Atheros AP91 reference board ethernet initialization -+ * -+ * Copyright (C) 2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "devices.h" -+#include "dev-dsa.h" -+#include "dev-ap91-eth.h" -+ -+static struct dsa_chip_data ap91_dsa_chip = { -+ .port_names[0] = "cpu", -+ .port_names[1] = "lan1", -+ .port_names[2] = "lan2", -+ .port_names[3] = "lan3", -+ .port_names[4] = "lan4", -+}; -+ -+static struct dsa_platform_data ap91_dsa_data = { -+ .nr_chips = 1, -+ .chip = &ap91_dsa_chip, -+}; -+ -+static void ap91_eth_set_port_name(unsigned port, const char *name) -+{ -+ if (port < 1 || port > 5) -+ return; -+ -+ if (name) -+ ap91_dsa_chip.port_names[port] = (char *) name; -+} -+ -+void __init ap91_eth_init(u8 *mac_addr, const char *port_names[]) -+{ -+ if (mac_addr) -+ ar71xx_set_mac_base(mac_addr); -+ -+ if (port_names) { -+ int i; -+ -+ for (i = 0; i < AP91_ETH_NUM_PORT_NAMES; i++) -+ ap91_eth_set_port_name(i + 1, port_names[i]); -+ } -+ -+ /* WAN port */ -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.speed = SPEED_100; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000; -+ ar71xx_eth0_data.fifo_cfg2 = 0x00001fff; -+ ar71xx_eth0_data.fifo_cfg3 = 0x008001ff; -+ -+ /* LAN ports */ -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.speed = SPEED_1000; -+ ar71xx_eth1_data.duplex = DUPLEX_FULL; -+ ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000; -+ ar71xx_eth1_data.fifo_cfg2 = 0x00001fff; -+ ar71xx_eth1_data.fifo_cfg3 = 0x008001ff; -+ -+ ar71xx_add_device_mdio(0x0); -+ ar71xx_add_device_eth(1); -+ ar71xx_add_device_eth(0); -+ -+ ar71xx_add_device_dsa(1, &ap91_dsa_data); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-eth.h linux-2.6.39/arch/mips/ar71xx/dev-ap91-eth.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-eth.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-eth.h 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,23 @@ -+/* -+ * Atheros AP91 reference board ethernet initialization -+ * -+ * Copyright (C) 2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_DEV_AP91_ETH_H -+#define _AR71XX_DEV_AP91_ETH_H -+ -+#define AP91_ETH_NUM_PORT_NAMES 4 -+ -+#if defined(CONFIG_AR71XX_DEV_AP91_ETH) -+void ap91_eth_init(u8 *mac_addr, const char *port_names[]) __init; -+#else -+static inline void ap91_eth_init(u8 *mac_addr) { } -+#endif -+ -+#endif /* _AR71XX_DEV_AP91_ETH_H */ -+ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,114 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c 2011-08-24 02:41:55.277990824 +0200 +@@ -0,0 +1,71 @@ +/* + * Atheros AP91 reference board PCI initialization + * @@ -680,10 +254,12 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mi +#include + +#include "dev-ap91-pci.h" ++#include "pci-ath9k-fixup.h" + -+static struct ath9k_platform_data ap91_wmac_data; ++static struct ath9k_platform_data ap91_wmac_data = { ++ .led_pin = -1, ++}; +static char ap91_wmac_mac[6]; -+static int ap91_pci_fixup_enabled; + +static struct ar71xx_pci_irq ap91_pci_irqs[] __initdata = { + { @@ -695,7 +271,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mi + +static int ap91_pci_plat_dev_init(struct pci_dev *dev) +{ -+ switch(PCI_SLOT(dev->devfn)) { ++ switch (PCI_SLOT(dev->devfn)) { + case 0: + dev->dev.platform_data = &ap91_wmac_data; + break; @@ -704,61 +280,16 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mi + return 0; +} + -+static void ap91_pci_fixup(struct pci_dev *dev) ++__init void ap91_pci_setup_wmac_led_pin(int pin) +{ -+ void __iomem *mem; -+ u16 *cal_data; -+ u16 cmd; -+ u32 val; -+ -+ if (!ap91_pci_fixup_enabled) -+ return; -+ -+ printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev)); -+ -+ cal_data = ap91_wmac_data.eeprom_data; -+ if (*cal_data != 0xa55a) { -+ printk(KERN_ERR "PCI: no calibration data found for %s\n", -+ pci_name(dev)); -+ return; -+ } -+ -+ mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); -+ if (!mem) { -+ printk(KERN_ERR "PCI: ioremap error for device %s\n", -+ pci_name(dev)); -+ return; -+ } -+ -+ /* Setup the PCI device to allow access to the internal registers */ -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff); -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ /* set pointer to first reg address */ -+ cal_data += 3; -+ while (*cal_data != 0xffff) { -+ u32 reg; -+ reg = *cal_data++; -+ val = *cal_data++; -+ val |= (*cal_data++) << 16; -+ -+ __raw_writel(val, mem + reg); -+ udelay(100); -+ } -+ -+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val); -+ dev->vendor = val & 0xffff; -+ dev->device = (val >> 16) & 0xffff; -+ -+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); -+ dev->revision = val & 0xff; -+ dev->class = val >> 8; /* upper 3 bytes */ ++ ap91_wmac_data.led_pin = pin; ++} + -+ iounmap(mem); ++__init void ap91_pci_setup_wmac_gpio(u32 mask, u32 val) ++{ ++ ap91_wmac_data.gpio_mask = mask; ++ ap91_wmac_data.gpio_val = val; +} -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ap91_pci_fixup); + +void __init ap91_pci_init(u8 *cal_data, u8 *mac_addr) +{ @@ -774,12 +305,12 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mi + ar71xx_pci_plat_dev_init = ap91_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(ap91_pci_irqs), ap91_pci_irqs); + -+ ap91_pci_fixup_enabled = 1; ++ pci_enable_ath9k_fixup(0, ap91_wmac_data.eeprom_data); +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.h linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h 2011-05-27 14:36:50.000000000 +0200 -@@ -0,0 +1,21 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h 2011-08-24 02:41:55.287981779 +0200 +@@ -0,0 +1,25 @@ +/* + * Atheros AP91 reference board PCI initialization + * @@ -795,16 +326,20 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.h linux-2.6.39/arch/mi + +#if defined(CONFIG_AR71XX_DEV_AP91_PCI) +void ap91_pci_init(u8 *cal_data, u8 *mac_addr) __init; ++void ap91_pci_setup_wmac_led_pin(int pin) __init; ++void ap91_pci_setup_wmac_gpio(u32 mask, u32 val) __init; +#else +static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) { } ++static inline void ap91_pci_setup_wmac_led_pin(int pin) { } ++static inline void ap91_pci_setup_wmac_gpio(u32 mask, u32 gpio) { } +#endif + +#endif /* _AR71XX_DEV_AP91_PCI_H */ + diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,159 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c 2011-08-24 02:41:55.287981779 +0200 +@@ -0,0 +1,109 @@ +/* + * Atheros AP94 reference board PCI initialization + * @@ -823,28 +358,32 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mi +#include + +#include "dev-ap94-pci.h" ++#include "pci-ath9k-fixup.h" + -+static struct ath9k_platform_data ap94_wmac0_data; -+static struct ath9k_platform_data ap94_wmac1_data; ++static struct ath9k_platform_data ap94_wmac0_data = { ++ .led_pin = -1, ++}; ++static struct ath9k_platform_data ap94_wmac1_data = { ++ .led_pin = -1, ++}; +static char ap94_wmac0_mac[6]; +static char ap94_wmac1_mac[6]; -+static int ap94_pci_fixup_enabled; + +static struct ar71xx_pci_irq ap94_pci_irqs[] __initdata = { -+ { -+ .slot = 0, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV0, -+ }, { -+ .slot = 1, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV1, -+ } ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, ++ }, { ++ .slot = 1, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV1, ++ } +}; + +static int ap94_pci_plat_dev_init(struct pci_dev *dev) +{ -+ switch(PCI_SLOT(dev->devfn)) { ++ switch (PCI_SLOT(dev->devfn)) { + case 17: + dev->dev.platform_data = &ap94_wmac0_data; + break; @@ -857,85 +396,30 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mi + return 0; +} + -+static void ap94_pci_fixup(struct pci_dev *dev) ++__init void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) +{ -+ void __iomem *mem; -+ u16 *cal_data; -+ u16 cmd; -+ u32 bar0; -+ u32 val; -+ -+ if (!ap94_pci_fixup_enabled) -+ return; -+ -+ switch (PCI_SLOT(dev->devfn)) { -+ case 17: -+ cal_data = ap94_wmac0_data.eeprom_data; ++ switch (wmac) { ++ case 0: ++ ap94_wmac0_data.led_pin = pin; + break; -+ case 18: -+ cal_data = ap94_wmac1_data.eeprom_data; ++ case 1: ++ ap94_wmac1_data.led_pin = pin; + break; -+ default: -+ return; -+ } -+ -+ if (*cal_data != 0xa55a) { -+ printk(KERN_ERR "PCI: no calibration data found for %s\n", -+ pci_name(dev)); -+ return; -+ } -+ -+ mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); -+ if (!mem) { -+ printk(KERN_ERR "PCI: ioremap error for device %s\n", -+ pci_name(dev)); -+ return; -+ } -+ -+ printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev)); -+ -+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); -+ -+ /* Setup the PCI device to allow access to the internal registers */ -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE); -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ /* set pointer to first reg address */ -+ cal_data += 3; -+ while (*cal_data != 0xffff) { -+ u32 reg; -+ reg = *cal_data++; -+ val = *cal_data++; -+ val |= (*cal_data++) << 16; -+ -+ __raw_writel(val, mem + reg); -+ udelay(100); + } -+ -+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val); -+ dev->vendor = val & 0xffff; -+ dev->device = (val >> 16) & 0xffff; -+ -+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); -+ dev->revision = val & 0xff; -+ dev->class = val >> 8; /* upper 3 bytes */ -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); -+ -+ iounmap(mem); +} -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ap94_pci_fixup); + -+void __init ap94_pci_enable_quirk_wndr3700(void) ++__init void ap94_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) +{ -+ ap94_wmac0_data.quirk_wndr3700 = 1; -+ ap94_wmac1_data.quirk_wndr3700 = 1; ++ switch (wmac) { ++ case 0: ++ ap94_wmac0_data.gpio_mask = mask; ++ ap94_wmac0_data.gpio_val = val; ++ break; ++ case 1: ++ ap94_wmac1_data.gpio_mask = mask; ++ ap94_wmac1_data.gpio_val = val; ++ break; ++ } +} + +void __init ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, @@ -962,12 +446,13 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mi + ar71xx_pci_plat_dev_init = ap94_pci_plat_dev_init; + ar71xx_pci_init(ARRAY_SIZE(ap94_pci_irqs), ap94_pci_irqs); + -+ ap94_pci_fixup_enabled = 1; ++ pci_enable_ath9k_fixup(17, ap94_wmac0_data.eeprom_data); ++ pci_enable_ath9k_fixup(18, ap94_wmac1_data.eeprom_data); +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.h linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,28 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h 2011-08-24 02:41:55.287981779 +0200 +@@ -0,0 +1,31 @@ +/* + * Atheros AP94 reference board PCI initialization + * @@ -985,28 +470,32 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.h linux-2.6.39/arch/mi +void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) __init; + -+void ap94_pci_enable_quirk_wndr3700(void) __init; ++void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) __init; ++void ap94_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val) __init; + +#else +static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0, + u8 *cal_data1, u8 *mac_addr1) {} + -+static inline void ap94_pci_enable_quirk_wndr3700(void) {} ++static inline void ap94_pci_setup_wmac_led_pin(unsigned wmac, int pin) {} ++static inline void ap94_pci_setup_wmac_gpio(unsigned wmac, ++ u32 mask, u32 val) {} +#endif + +#endif /* _AR71XX_DEV_AP94_PCI_H */ + -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.c linux-2.6.39/arch/mips/ar71xx/dev-ar913x-wmac.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ar913x-wmac.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,68 @@ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.c linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c 2011-08-24 02:41:55.287981779 +0200 +@@ -0,0 +1,154 @@ +/* -+ * Atheros AR913x SoC built-in WMAC device support ++ * Atheros AR9XXX SoCs built-in WMAC device support + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan + * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -1022,15 +511,18 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.c linux-2.6.39/arch + +#include + -+#include "dev-ar913x-wmac.h" ++#include "dev-ar9xxx-wmac.h" ++ ++#define MHZ_25 (25 * 1000 * 1000) + -+static struct ath9k_platform_data ar913x_wmac_data; -+static char ar913x_wmac_mac[6]; ++static struct ath9k_platform_data ar9xxx_wmac_data = { ++ .led_pin = -1, ++}; ++static char ar9xxx_wmac_mac[6]; + -+static struct resource ar913x_wmac_resources[] = { ++static struct resource ar9xxx_wmac_resources[] = { + { -+ .start = AR91XX_WMAC_BASE, -+ .end = AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1, ++ /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, { + .start = AR71XX_CPU_IRQ_IP2, @@ -1039,90 +531,234 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.c linux-2.6.39/arch + }, +}; + -+static struct platform_device ar913x_wmac_device = { ++static struct platform_device ar9xxx_wmac_device = { + .name = "ath9k", + .id = -1, -+ .resource = ar913x_wmac_resources, -+ .num_resources = ARRAY_SIZE(ar913x_wmac_resources), ++ .resource = ar9xxx_wmac_resources, ++ .num_resources = ARRAY_SIZE(ar9xxx_wmac_resources), + .dev = { -+ .platform_data = &ar913x_wmac_data, ++ .platform_data = &ar9xxx_wmac_data, + }, +}; + -+void __init ar913x_add_device_wmac(u8 *cal_data, u8 *mac_addr) ++static void ar913x_wmac_init(void) +{ -+ if (cal_data) -+ memcpy(ar913x_wmac_data.eeprom_data, cal_data, -+ sizeof(ar913x_wmac_data.eeprom_data)); -+ -+ if (mac_addr) { -+ memcpy(ar913x_wmac_mac, mac_addr, sizeof(ar913x_wmac_mac)); -+ ar913x_wmac_data.macaddr = ar913x_wmac_mac; -+ } -+ + ar71xx_device_stop(RESET_MODULE_AMBA2WMAC); + mdelay(10); + + ar71xx_device_start(RESET_MODULE_AMBA2WMAC); + mdelay(10); + -+ platform_device_register(&ar913x_wmac_device); ++ ar9xxx_wmac_resources[0].start = AR91XX_WMAC_BASE; ++ ar9xxx_wmac_resources[0].end = AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1; +} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.h linux-2.6.39/arch/mips/ar71xx/dev-ar913x-wmac.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar913x-wmac.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ar913x-wmac.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,19 @@ -+/* -+ * Atheros AR913x SoC built-in WMAC device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ + -+#ifndef _AR71XX_DEV_AR913X_WMAC_H -+#define _AR71XX_DEV_AR913X_WMAC_H ++static int ar933x_r1_get_wmac_revision(void) ++{ ++ return ar71xx_soc_rev; ++} + -+void ar913x_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init; ++static int ar933x_wmac_reset(void) ++{ ++ unsigned retries = 0; + -+#endif /* _AR71XX_DEV_AR913X_WMAC_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c linux-2.6.39/arch/mips/ar71xx/dev-dsa.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,50 @@ -+/* -+ * Atheros AR71xx DSA switch device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ ar71xx_device_stop(AR933X_RESET_WMAC); ++ ar71xx_device_start(AR933X_RESET_WMAC); + -+#include -+#include ++ while (1) { ++ u32 bootstrap; + -+#include ++ bootstrap = ar71xx_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0) ++ return 0; + -+#include "devices.h" -+#include "dev-dsa.h" ++ if (retries > 20) ++ break; + -+static struct platform_device ar71xx_dsa_switch_device = { -+ .name = "dsa", -+ .id = 0, -+}; ++ udelay(10000); ++ retries++; ++ } + -+void __init ar71xx_add_device_dsa(unsigned int id, -+ struct dsa_platform_data *d) -+{ -+ int i; ++ pr_err("ar93xx: WMAC reset timed out"); ++ return -ETIMEDOUT; ++} ++ ++static void ar933x_wmac_init(void) ++{ ++ ar9xxx_wmac_device.name = "ar933x_wmac"; ++ ar9xxx_wmac_resources[0].start = AR933X_WMAC_BASE; ++ ar9xxx_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; ++ if (ar71xx_ref_freq == MHZ_25) ++ ar9xxx_wmac_data.is_clk_25mhz = true; ++ ++ if (ar71xx_soc_rev == 1) ++ ar9xxx_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; ++ ++ ar9xxx_wmac_data.external_reset = ar933x_wmac_reset; ++ ++ ar933x_wmac_reset(); ++} ++ ++static void ar934x_wmac_init(void) ++{ ++ ar9xxx_wmac_device.name = "ar934x_wmac"; ++ ar9xxx_wmac_resources[0].start = AR934X_WMAC_BASE; ++ ar9xxx_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; ++ if (ar71xx_ref_freq == MHZ_25) ++ ar9xxx_wmac_data.is_clk_25mhz = true; ++} ++ ++void __init ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr) ++{ ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ ar913x_wmac_init(); ++ break; ++ ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ ar933x_wmac_init(); ++ break; ++ ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ ar934x_wmac_init(); ++ break; ++ ++ default: ++ BUG(); ++ } ++ ++ if (cal_data) ++ memcpy(ar9xxx_wmac_data.eeprom_data, cal_data, ++ sizeof(ar9xxx_wmac_data.eeprom_data)); ++ ++ if (mac_addr) { ++ memcpy(ar9xxx_wmac_mac, mac_addr, sizeof(ar9xxx_wmac_mac)); ++ ar9xxx_wmac_data.macaddr = ar9xxx_wmac_mac; ++ } ++ ++ platform_device_register(&ar9xxx_wmac_device); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.h linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h 2011-08-24 02:41:55.297981663 +0200 +@@ -0,0 +1,20 @@ ++/* ++ * Atheros AR9XXX SoCs built-in WMAC device support ++ * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_AR9XXX_WMAC_H ++#define _AR71XX_DEV_AR9XXX_WMAC_H ++ ++void ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init; ++ ++#endif /* _AR71XX_DEV_AR9XXX_WMAC_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.c linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.c 2011-08-24 02:41:55.317990461 +0200 +@@ -0,0 +1,31 @@ ++/* ++ * Atheros db120 reference board PCI initialization ++ * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan ++ * ++ * Parts of this file are based on Atheros linux 2.6.31 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++ ++#include ++#include ++ ++#include "dev-db120-pci.h" ++ ++static struct ar71xx_pci_irq db120_pci_irqs[] __initdata = { ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, ++ } ++}; ++ ++void __init db120_pci_init(void) ++{ ++ ar71xx_pci_init(ARRAY_SIZE(db120_pci_irqs), db120_pci_irqs); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.h linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.h 2011-08-24 02:41:55.327990934 +0200 +@@ -0,0 +1,22 @@ ++/* ++ * Atheros DB120 reference board PCI initialization ++ * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan ++ * ++ * Parts of this file are based on Atheros linux 2.6.31 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_DB120_PCI_H ++#define _AR71XX_DEV_DB120_PCI_H ++ ++#if defined(CONFIG_AR71XX_DEV_DB120_PCI) ++void db120_pci_init(void); ++#else ++static inline void db120_pci_init(void) { } ++#endif ++ ++#endif /* _AR71XX_DEV_DB120_PCI_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c linux-2.6.39/arch/mips/ar71xx/dev-dsa.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.c 2011-08-24 02:41:55.337990441 +0200 +@@ -0,0 +1,50 @@ ++/* ++ * Atheros AR71xx DSA switch device support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++ ++#include ++ ++#include "devices.h" ++#include "dev-dsa.h" ++ ++static struct platform_device ar71xx_dsa_switch_device = { ++ .name = "dsa", ++ .id = 0, ++}; ++ ++void __init ar71xx_add_device_dsa(unsigned int id, ++ struct dsa_platform_data *d) ++{ ++ int i; + + switch (id) { + case 0: @@ -1147,7 +783,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c linux-2.6.39/arch/mips/ar +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.h linux-2.6.39/arch/mips/ar71xx/dev-dsa.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.h 2011-05-27 14:36:51.000000000 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.h 2011-08-24 02:41:55.347990727 +0200 @@ -0,0 +1,20 @@ +/* + * Atheros AR71xx DSA switch device support @@ -1171,7 +807,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.h linux-2.6.39/arch/mips/ar +#endif /* _AR71XX_DEV_DSA_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c 2011-05-27 14:36:51.000000000 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c 2011-08-24 02:41:55.347990727 +0200 @@ -0,0 +1,58 @@ +/* + * Atheros AR71xx GPIO button support @@ -1185,18 +821,19 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arc + */ + +#include "linux/init.h" ++#include "linux/slab.h" +#include + +#include "dev-gpio-buttons.h" + -+void __init ar71xx_add_device_gpio_buttons(int id, -+ unsigned poll_interval, -+ unsigned nbuttons, -+ struct gpio_button *buttons) ++void __init ar71xx_register_gpio_keys_polled(int id, ++ unsigned poll_interval, ++ unsigned nbuttons, ++ struct gpio_keys_button *buttons) +{ + struct platform_device *pdev; -+ struct gpio_buttons_platform_data pdata; -+ struct gpio_button *p; ++ struct gpio_keys_platform_data pdata; ++ struct gpio_keys_button *p; + int err; + + p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); @@ -1205,7 +842,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arc + + memcpy(p, buttons, nbuttons * sizeof(*p)); + -+ pdev = platform_device_alloc("gpio-buttons", id); ++ pdev = platform_device_alloc("gpio-keys-polled", id); + if (!pdev) + goto err_free_buttons; + @@ -1218,7 +855,6 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arc + if (err) + goto err_put_pdev; + -+ + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; @@ -1233,8 +869,8 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arc +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.h linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,25 @@ ++++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h 2011-08-24 02:41:55.347990727 +0200 +@@ -0,0 +1,23 @@ +/* + * Atheros AR71xx GPIO button support + * @@ -1250,1169 +886,1121 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.h linux-2.6.39/arc +#define _AR71XX_DEV_GPIO_BUTTONS_H + +#include -+#include -+ -+#include ++#include + -+void ar71xx_add_device_gpio_buttons(int id, -+ unsigned poll_interval, -+ unsigned nbuttons, -+ struct gpio_button *buttons) __init; ++void ar71xx_register_gpio_keys_polled(int id, ++ unsigned poll_interval, ++ unsigned nbuttons, ++ struct gpio_keys_button *buttons); + +#endif /* _AR71XX_DEV_GPIO_BUTTONS_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,57 @@ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/devices.c linux-2.6.39/arch/mips/ar71xx/devices.c +--- linux-2.6.39.orig/arch/mips/ar71xx/devices.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/devices.c 2011-08-24 02:41:55.347990727 +0200 +@@ -0,0 +1,765 @@ +/* -+ * Atheros AR71xx GPIO LED device support ++ * Atheros AR71xx SoC platform devices + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan + * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + ++#include +#include ++#include ++#include +#include -+#include -+ -+#include "dev-leds-gpio.h" -+ -+void __init ar71xx_add_device_leds_gpio(int id, unsigned num_leds, -+ struct gpio_led *leds) -+{ -+ struct platform_device *pdev; -+ struct gpio_led_platform_data pdata; -+ struct gpio_led *p; -+ int err; ++#include + -+ p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); -+ if (!p) -+ return; ++#include ++#include + -+ memcpy(p, leds, num_leds * sizeof(*p)); ++#include "devices.h" + -+ pdev = platform_device_alloc("leds-gpio", id); -+ if (!pdev) -+ goto err_free_leds; ++unsigned char ar71xx_mac_base[ETH_ALEN] __initdata; + -+ memset(&pdata, 0, sizeof(pdata)); -+ pdata.num_leds = num_leds; -+ pdata.leds = p; ++static struct resource ar71xx_uart_resources[] = { ++ { ++ .start = AR71XX_UART_BASE, ++ .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; + -+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); -+ if (err) -+ goto err_put_pdev; ++#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) ++static struct plat_serial8250_port ar71xx_uart_data[] = { ++ { ++ .mapbase = AR71XX_UART_BASE, ++ .irq = AR71XX_MISC_IRQ_UART, ++ .flags = AR71XX_UART_FLAGS, ++ .iotype = UPIO_MEM32, ++ .regshift = 2, ++ }, { ++ /* terminating entry */ ++ } ++}; + -+ err = platform_device_add(pdev); -+ if (err) -+ goto err_put_pdev; ++static struct platform_device ar71xx_uart_device = { ++ .name = "serial8250", ++ .id = PLAT8250_DEV_PLATFORM, ++ .resource = ar71xx_uart_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_uart_resources), ++ .dev = { ++ .platform_data = ar71xx_uart_data ++ }, ++}; + -+ return; ++static struct resource ar933x_uart_resources[] = { ++ { ++ .start = AR933X_UART_BASE, ++ .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = AR71XX_MISC_IRQ_UART, ++ .end = AR71XX_MISC_IRQ_UART, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; + -+err_put_pdev: -+ platform_device_put(pdev); ++static struct ar933x_uart_platform_data ar933x_uart_data; ++static struct platform_device ar933x_uart_device = { ++ .name = "ar933x-uart", ++ .id = -1, ++ .resource = ar933x_uart_resources, ++ .num_resources = ARRAY_SIZE(ar933x_uart_resources), ++ .dev = { ++ .platform_data = &ar933x_uart_data, ++ }, ++}; + -+err_free_leds: -+ kfree(p); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,21 @@ -+/* -+ * Atheros AR71xx GPIO LED device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++void __init ar71xx_add_device_uart(void) ++{ ++ struct platform_device *pdev; + -+#ifndef _AR71XX_DEV_LEDS_GPIO_H -+#define _AR71XX_DEV_LEDS_GPIO_H ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ pdev = &ar71xx_uart_device; ++ ar71xx_uart_data[0].uartclk = ar71xx_ahb_freq; ++ break; + -+#include ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ pdev = &ar933x_uart_device; ++ ar933x_uart_data.uartclk = ar71xx_ref_freq; ++ break; + -+void ar71xx_add_device_leds_gpio(int id, -+ unsigned num_leds, -+ struct gpio_led *leds) __init; ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ pdev = &ar71xx_uart_device; ++ ar71xx_uart_data[0].uartclk = ar71xx_ref_freq; ++ break; + -+#endif /* _AR71XX_DEV_LEDS_GPIO_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,30 @@ -+/* -+ * Copyright (C) 2009 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ default: ++ BUG(); ++ } + -+#include -+#include -+#include ++ platform_device_register(pdev); ++} + -+#include "devices.h" -+#include "dev-m25p80.h" -+ -+static struct spi_board_info ar71xx_spi_info[] = { ++static struct resource ar71xx_mdio_resources[] = { + { -+ .bus_num = 0, -+ .chip_select = 0, -+ .max_speed_hz = 25000000, -+ .modalias = "m25p80", ++ .name = "mdio_base", ++ .flags = IORESOURCE_MEM, ++ .start = AR71XX_GE0_BASE, ++ .end = AR71XX_GE0_BASE + 0x200 - 1, + } +}; + -+void __init ar71xx_add_device_m25p80(struct flash_platform_data *pdata) -+{ -+ ar71xx_spi_info[0].platform_data = pdata; -+ ar71xx_add_device_spi(NULL, ar71xx_spi_info, -+ ARRAY_SIZE(ar71xx_spi_info)); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,16 @@ -+/* -+ * Copyright (C) 2009 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++static struct ag71xx_mdio_platform_data ar71xx_mdio_data; + -+#ifndef _AR71XX_DEV_M25P80_H -+#define _AR71XX_DEV_M25P80_H ++struct platform_device ar71xx_mdio_device = { ++ .name = "ag71xx-mdio", ++ .id = -1, ++ .resource = ar71xx_mdio_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_mdio_resources), ++ .dev = { ++ .platform_data = &ar71xx_mdio_data, ++ }, ++}; + -+#include ++static void ar71xx_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift) ++{ ++ void __iomem *base; ++ u32 t; + -+void ar71xx_add_device_m25p80(struct flash_platform_data *pdata) __init; ++ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); + -+#endif /* _AR71XX_DEV_M25P80_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,40 @@ -+/* -+ * Atheros PB42 reference board PCI initialization -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ t = __raw_readl(base + cfg_reg); ++ t &= ~(3 << shift); ++ t |= (2 << shift); ++ __raw_writel(t, base + cfg_reg); ++ udelay(100); + -+#include ++ __raw_writel(pll_val, base + pll_reg); + -+#include -+#include ++ t |= (3 << shift); ++ __raw_writel(t, base + cfg_reg); ++ udelay(100); + -+#include "dev-pb42-pci.h" ++ t &= ~(3 << shift); ++ __raw_writel(t, base + cfg_reg); ++ udelay(100); + -+static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = { -+ { -+ .slot = 0, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV0, -+ }, { -+ .slot = 1, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV1, -+ }, { -+ .slot = 2, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV2, -+ } -+}; ++ printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n", ++ (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg)); + -+void __init pb42_pci_init(void) -+{ -+ ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs); ++ iounmap(base); +} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.h linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,21 @@ -+/* -+ * Atheros PB42 reference board PCI initialization -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ + -+#ifndef _AR71XX_DEV_PB42_PCI_H -+#define _AR71XX_DEV_PB42_PCI_H ++void __init ar71xx_add_device_mdio(u32 phy_mask) ++{ ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7240: ++ ar71xx_mdio_data.is_ar7240 = 1; ++ break; ++ case AR71XX_SOC_AR7241: ++ ar71xx_mdio_data.is_ar7240 = 1; ++ ar71xx_mdio_resources[0].start = AR71XX_GE1_BASE; ++ ar71xx_mdio_resources[0].end = AR71XX_GE1_BASE + 0x200 - 1; ++ break; ++ case AR71XX_SOC_AR7242: ++ ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, ++ AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000, ++ AR71XX_ETH0_PLL_SHIFT); ++ break; ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ ar71xx_mdio_data.is_ar7240 = 1; ++ ar71xx_mdio_resources[0].start = AR71XX_GE1_BASE; ++ ar71xx_mdio_resources[0].end = AR71XX_GE1_BASE + 0x200 - 1; ++ break; ++ default: ++ break; ++ } + -+#if defined(CONFIG_AR71XX_DEV_PB42_PCI) -+void pb42_pci_init(void) __init; -+#else -+static inline void pb42_pci_init(void) { } -+#endif ++ ar71xx_mdio_data.phy_mask = phy_mask; + -+#endif /* _AR71XX_DEV_PB42_PCI_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.c linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,33 @@ -+/* -+ * Atheros PB9x reference board PCI initialization -+ * -+ * Copyright (C) 2010 Felix Fietkau -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ platform_device_register(&ar71xx_mdio_device); ++} + -+#include ++struct ar71xx_eth_pll_data ar71xx_eth0_pll_data; ++struct ar71xx_eth_pll_data ar71xx_eth1_pll_data; + -+#include -+#include ++static u32 ar71xx_get_eth_pll(unsigned int mac, int speed) ++{ ++ struct ar71xx_eth_pll_data *pll_data; ++ u32 pll_val; + -+#include "dev-pb9x-pci.h" ++ switch (mac) { ++ case 0: ++ pll_data = &ar71xx_eth0_pll_data; ++ break; ++ case 1: ++ pll_data = &ar71xx_eth1_pll_data; ++ break; ++ default: ++ BUG(); ++ } + -+static struct ar71xx_pci_irq pb9x_pci_irqs[] __initdata = { -+ { -+ .slot = 0, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV0, ++ switch (speed) { ++ case SPEED_10: ++ pll_val = pll_data->pll_10; ++ break; ++ case SPEED_100: ++ pll_val = pll_data->pll_100; ++ break; ++ case SPEED_1000: ++ pll_val = pll_data->pll_1000; ++ break; ++ default: ++ BUG(); + } -+}; + -+void __init pb9x_pci_init(void) -+{ -+ ar71xx_pci_init(ARRAY_SIZE(pb9x_pci_irqs), pb9x_pci_irqs); ++ return pll_val; +} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.h linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,22 @@ -+/* -+ * Atheros PB9x reference board PCI initialization -+ * -+ * Copyright (C) 2010 Felix Fietkau -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_DEV_PB9X_PCI_H -+#define _AR71XX_DEV_PB9X_PCI_H + -+#if defined(CONFIG_AR71XX_DEV_PB9X_PCI) -+void pb9x_pci_init(void) __init; -+#else -+static inline void pb9x_pci_init(void) { } -+#endif ++static void ar71xx_set_pll_ge0(int speed) ++{ ++ u32 val = ar71xx_get_eth_pll(0, speed); + -+#endif /* _AR71XX_DEV_PB9X_PCI_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.c linux-2.6.39/arch/mips/ar71xx/dev-usb.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-usb.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,181 @@ -+/* -+ * Atheros AR71xx USB host device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK, ++ val, AR71XX_ETH0_PLL_SHIFT); ++} + -+#include -+#include -+#include -+#include -+#include ++static void ar71xx_set_pll_ge1(int speed) ++{ ++ u32 val = ar71xx_get_eth_pll(1, speed); + -+#include -+#include ++ ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK, ++ val, AR71XX_ETH1_PLL_SHIFT); ++} + -+#include "dev-usb.h" ++static void ar724x_set_pll_ge0(int speed) ++{ ++ /* TODO */ ++} + -+/* -+ * OHCI (USB full speed host controller) -+ */ -+static struct resource ar71xx_ohci_resources[] = { -+ [0] = { -+ .start = AR71XX_OHCI_BASE, -+ .end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1, ++static void ar724x_set_pll_ge1(int speed) ++{ ++ /* TODO */ ++} ++ ++static void ar7242_set_pll_ge0(int speed) ++{ ++ u32 val = ar71xx_get_eth_pll(0, speed); ++ ++ ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR7242_PLL_REG_ETH0_INT_CLOCK, ++ val, AR71XX_ETH0_PLL_SHIFT); ++} ++ ++static void ar91xx_set_pll_ge0(int speed) ++{ ++ u32 val = ar71xx_get_eth_pll(0, speed); ++ ++ ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH0_INT_CLOCK, ++ val, AR91XX_ETH0_PLL_SHIFT); ++} ++ ++static void ar91xx_set_pll_ge1(int speed) ++{ ++ u32 val = ar71xx_get_eth_pll(1, speed); ++ ++ ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH1_INT_CLOCK, ++ val, AR91XX_ETH1_PLL_SHIFT); ++} ++ ++static void ar933x_set_pll_ge0(int speed) ++{ ++ /* TODO */ ++} ++ ++static void ar933x_set_pll_ge1(int speed) ++{ ++ /* TODO */ ++} ++ ++static void ar71xx_ddr_flush_ge0(void) ++{ ++ ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE0); ++} ++ ++static void ar71xx_ddr_flush_ge1(void) ++{ ++ ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE1); ++} ++ ++static void ar724x_ddr_flush_ge0(void) ++{ ++ ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE0); ++} ++ ++static void ar724x_ddr_flush_ge1(void) ++{ ++ ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE1); ++} ++ ++static void ar91xx_ddr_flush_ge0(void) ++{ ++ ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE0); ++} ++ ++static void ar91xx_ddr_flush_ge1(void) ++{ ++ ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE1); ++} ++ ++static void ar933x_ddr_flush_ge0(void) ++{ ++ ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE0); ++} ++ ++static void ar933x_ddr_flush_ge1(void) ++{ ++ ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE1); ++} ++ ++static struct resource ar71xx_eth0_resources[] = { ++ { ++ .name = "mac_base", + .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AR71XX_MISC_IRQ_OHCI, -+ .end = AR71XX_MISC_IRQ_OHCI, ++ .start = AR71XX_GE0_BASE, ++ .end = AR71XX_GE0_BASE + 0x200 - 1, ++ }, { ++ .name = "mii_ctrl", ++ .flags = IORESOURCE_MEM, ++ .start = AR71XX_MII_BASE + MII_REG_MII0_CTRL, ++ .end = AR71XX_MII_BASE + MII_REG_MII0_CTRL + 3, ++ }, { ++ .name = "mac_irq", + .flags = IORESOURCE_IRQ, ++ .start = AR71XX_CPU_IRQ_GE0, ++ .end = AR71XX_CPU_IRQ_GE0, + }, +}; + -+static struct resource ar7240_ohci_resources[] = { -+ [0] = { -+ .start = AR7240_OHCI_BASE, -+ .end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AR71XX_CPU_IRQ_USB, -+ .end = AR71XX_CPU_IRQ_USB, -+ .flags = IORESOURCE_IRQ, -+ }, ++struct ag71xx_platform_data ar71xx_eth0_data = { ++ .reset_bit = RESET_MODULE_GE0_MAC, +}; + -+static u64 ar71xx_ohci_dmamask = DMA_BIT_MASK(32); -+static struct platform_device ar71xx_ohci_device = { -+ .name = "ar71xx-ohci", -+ .id = -1, -+ .resource = ar71xx_ohci_resources, -+ .num_resources = ARRAY_SIZE(ar71xx_ohci_resources), ++struct platform_device ar71xx_eth0_device = { ++ .name = "ag71xx", ++ .id = 0, ++ .resource = ar71xx_eth0_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_eth0_resources), + .dev = { -+ .dma_mask = &ar71xx_ohci_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), ++ .platform_data = &ar71xx_eth0_data, + }, +}; + -+/* -+ * EHCI (USB full speed host controller) -+ */ -+static struct resource ar71xx_ehci_resources[] = { -+ [0] = { -+ .start = AR71XX_EHCI_BASE, -+ .end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1, ++static struct resource ar71xx_eth1_resources[] = { ++ { ++ .name = "mac_base", + .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AR71XX_CPU_IRQ_USB, -+ .end = AR71XX_CPU_IRQ_USB, ++ .start = AR71XX_GE1_BASE, ++ .end = AR71XX_GE1_BASE + 0x200 - 1, ++ }, { ++ .name = "mii_ctrl", ++ .flags = IORESOURCE_MEM, ++ .start = AR71XX_MII_BASE + MII_REG_MII1_CTRL, ++ .end = AR71XX_MII_BASE + MII_REG_MII1_CTRL + 3, ++ }, { ++ .name = "mac_irq", + .flags = IORESOURCE_IRQ, ++ .start = AR71XX_CPU_IRQ_GE1, ++ .end = AR71XX_CPU_IRQ_GE1, + }, +}; + -+static u64 ar71xx_ehci_dmamask = DMA_BIT_MASK(32); -+static struct ar71xx_ehci_platform_data ar71xx_ehci_data; ++struct ag71xx_platform_data ar71xx_eth1_data = { ++ .reset_bit = RESET_MODULE_GE1_MAC, ++}; + -+static struct platform_device ar71xx_ehci_device = { -+ .name = "ar71xx-ehci", -+ .id = -1, -+ .resource = ar71xx_ehci_resources, -+ .num_resources = ARRAY_SIZE(ar71xx_ehci_resources), ++struct platform_device ar71xx_eth1_device = { ++ .name = "ag71xx", ++ .id = 1, ++ .resource = ar71xx_eth1_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_eth1_resources), + .dev = { -+ .dma_mask = &ar71xx_ehci_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &ar71xx_ehci_data, ++ .platform_data = &ar71xx_eth1_data, + }, +}; + -+#define AR71XX_USB_RESET_MASK \ -+ (RESET_MODULE_USB_HOST | RESET_MODULE_USB_PHY \ -+ | RESET_MODULE_USB_OHCI_DLL) -+ -+#define AR7240_USB_RESET_MASK \ -+ (RESET_MODULE_USB_HOST | RESET_MODULE_USB_OHCI_DLL_7240) -+ -+static void __init ar71xx_usb_setup(void) -+{ -+ ar71xx_device_stop(AR71XX_USB_RESET_MASK); -+ mdelay(1000); -+ ar71xx_device_start(AR71XX_USB_RESET_MASK); ++#define AR71XX_PLL_VAL_1000 0x00110000 ++#define AR71XX_PLL_VAL_100 0x00001099 ++#define AR71XX_PLL_VAL_10 0x00991099 + -+ /* Turning on the Buff and Desc swap bits */ -+ ar71xx_usb_ctrl_wr(USB_CTRL_REG_CONFIG, 0xf0000); ++#define AR724X_PLL_VAL_1000 0x00110000 ++#define AR724X_PLL_VAL_100 0x00001099 ++#define AR724X_PLL_VAL_10 0x00991099 + -+ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ -+ ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x20c00); ++#define AR7242_PLL_VAL_1000 0x1c000000 ++#define AR7242_PLL_VAL_100 0x00000101 ++#define AR7242_PLL_VAL_10 0x00001616 + -+ mdelay(900); ++#define AR91XX_PLL_VAL_1000 0x1a000000 ++#define AR91XX_PLL_VAL_100 0x13000a44 ++#define AR91XX_PLL_VAL_10 0x00441099 + -+ platform_device_register(&ar71xx_ohci_device); -+ platform_device_register(&ar71xx_ehci_device); -+} ++#define AR933X_PLL_VAL_1000 0x00110000 ++#define AR933X_PLL_VAL_100 0x00001099 ++#define AR933X_PLL_VAL_10 0x00991099 + -+static void __init ar7240_usb_setup(void) ++static void __init ar71xx_init_eth_pll_data(unsigned int id) +{ -+ ar71xx_device_stop(AR7240_USB_RESET_MASK); -+ mdelay(1000); -+ ar71xx_device_start(AR7240_USB_RESET_MASK); -+ -+ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ -+ ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x3); ++ struct ar71xx_eth_pll_data *pll_data; ++ u32 pll_10, pll_100, pll_1000; + -+ if (ar71xx_soc == AR71XX_SOC_AR7241 || ar71xx_soc == AR71XX_SOC_AR7242) { -+ ar71xx_ehci_data.is_ar91xx = 1; -+ ar71xx_ehci_device.resource = ar7240_ohci_resources; -+ ar71xx_ehci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); -+ platform_device_register(&ar71xx_ehci_device); -+ } else { -+ ar71xx_ohci_device.resource = ar7240_ohci_resources; -+ ar71xx_ohci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); -+ platform_device_register(&ar71xx_ohci_device); ++ switch (id) { ++ case 0: ++ pll_data = &ar71xx_eth0_pll_data; ++ break; ++ case 1: ++ pll_data = &ar71xx_eth1_pll_data; ++ break; ++ default: ++ BUG(); + } -+} -+ -+static void __init ar91xx_usb_setup(void) -+{ -+ ar71xx_device_stop(RESET_MODULE_USBSUS_OVERRIDE); -+ mdelay(10); + -+ ar71xx_device_start(RESET_MODULE_USB_HOST); -+ mdelay(10); -+ -+ ar71xx_device_start(RESET_MODULE_USB_PHY); -+ mdelay(10); -+ -+ ar71xx_ehci_data.is_ar91xx = 1; -+ platform_device_register(&ar71xx_ehci_device); -+} -+ -+void __init ar71xx_add_device_usb(void) -+{ + switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ pll_10 = AR71XX_PLL_VAL_10; ++ pll_100 = AR71XX_PLL_VAL_100; ++ pll_1000 = AR71XX_PLL_VAL_1000; ++ break; ++ + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ ar7240_usb_setup(); ++ pll_10 = AR724X_PLL_VAL_10; ++ pll_100 = AR724X_PLL_VAL_100; ++ pll_1000 = AR724X_PLL_VAL_1000; + break; + -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ ar71xx_usb_setup(); ++ case AR71XX_SOC_AR7242: ++ pll_10 = AR7242_PLL_VAL_10; ++ pll_100 = AR7242_PLL_VAL_100; ++ pll_1000 = AR7242_PLL_VAL_1000; + break; + + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: -+ ar91xx_usb_setup(); -+ break; ++ pll_10 = AR91XX_PLL_VAL_10; ++ pll_100 = AR91XX_PLL_VAL_100; ++ pll_1000 = AR91XX_PLL_VAL_1000; ++ break; ++ ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ pll_10 = AR933X_PLL_VAL_10; ++ pll_100 = AR933X_PLL_VAL_100; ++ pll_1000 = AR933X_PLL_VAL_1000; ++ break; + + default: + BUG(); + } -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.h linux-2.6.39/arch/mips/ar71xx/dev-usb.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-usb.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,17 @@ -+/* -+ * Atheros AR71xx USB host device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_DEV_USB_H -+#define _AR71XX_DEV_USB_H -+ -+void ar71xx_add_device_usb(void) __init; -+ -+#endif /* _AR71XX_DEV_USB_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/devices.c linux-2.6.39/arch/mips/ar71xx/devices.c ---- linux-2.6.39.orig/arch/mips/ar71xx/devices.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/devices.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,575 @@ -+/* -+ * Atheros AR71xx SoC platform devices -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include + -+#include -+ -+#include "devices.h" -+ -+static u8 ar71xx_mac_base[ETH_ALEN] __initdata; -+ -+static struct resource ar71xx_uart_resources[] = { -+ { -+ .start = AR71XX_UART_BASE, -+ .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) -+static struct plat_serial8250_port ar71xx_uart_data[] = { -+ { -+ .mapbase = AR71XX_UART_BASE, -+ .irq = AR71XX_MISC_IRQ_UART, -+ .flags = AR71XX_UART_FLAGS, -+ .iotype = UPIO_MEM32, -+ .regshift = 2, -+ }, { -+ /* terminating entry */ -+ } -+}; ++ if (!pll_data->pll_10) ++ pll_data->pll_10 = pll_10; + -+static struct platform_device ar71xx_uart_device = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .resource = ar71xx_uart_resources, -+ .num_resources = ARRAY_SIZE(ar71xx_uart_resources), -+ .dev = { -+ .platform_data = ar71xx_uart_data -+ }, -+}; ++ if (!pll_data->pll_100) ++ pll_data->pll_100 = pll_100; + -+void __init ar71xx_add_device_uart(void) -+{ -+ ar71xx_uart_data[0].uartclk = ar71xx_ahb_freq; -+ platform_device_register(&ar71xx_uart_device); ++ if (!pll_data->pll_1000) ++ pll_data->pll_1000 = pll_1000; +} + -+static struct resource ar71xx_mdio_resources[] = { -+ { -+ .name = "mdio_base", -+ .flags = IORESOURCE_MEM, -+ .start = AR71XX_GE0_BASE, -+ .end = AR71XX_GE0_BASE + 0x200 - 1, -+ } -+}; -+ -+static struct ag71xx_mdio_platform_data ar71xx_mdio_data; ++static int ar71xx_eth_instance __initdata; ++void __init ar71xx_add_device_eth(unsigned int id) ++{ ++ struct platform_device *pdev; ++ struct ag71xx_platform_data *pdata; + -+struct platform_device ar71xx_mdio_device = { -+ .name = "ag71xx-mdio", -+ .id = -1, -+ .resource = ar71xx_mdio_resources, -+ .num_resources = ARRAY_SIZE(ar71xx_mdio_resources), -+ .dev = { -+ .platform_data = &ar71xx_mdio_data, -+ }, -+}; ++ ar71xx_init_eth_pll_data(id); + -+void __init ar71xx_add_device_mdio(u32 phy_mask) -+{ -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7240: -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ ar71xx_mdio_data.is_ar7240 = 1; ++ switch (id) { ++ case 0: ++ switch (ar71xx_eth0_data.phy_if_mode) { ++ case PHY_INTERFACE_MODE_MII: ++ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_MII; ++ break; ++ case PHY_INTERFACE_MODE_GMII: ++ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_GMII; ++ break; ++ case PHY_INTERFACE_MODE_RGMII: ++ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_RGMII; ++ break; ++ case PHY_INTERFACE_MODE_RMII: ++ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_RMII; ++ break; ++ default: ++ printk(KERN_ERR "ar71xx: invalid PHY interface mode " ++ "for eth0\n"); ++ return; ++ } ++ pdev = &ar71xx_eth0_device; + break; -+ default: ++ case 1: ++ switch (ar71xx_eth1_data.phy_if_mode) { ++ case PHY_INTERFACE_MODE_RMII: ++ ar71xx_eth1_data.mii_if = MII1_CTRL_IF_RMII; ++ break; ++ case PHY_INTERFACE_MODE_RGMII: ++ ar71xx_eth1_data.mii_if = MII1_CTRL_IF_RGMII; ++ break; ++ default: ++ printk(KERN_ERR "ar71xx: invalid PHY interface mode " ++ "for eth1\n"); ++ return; ++ } ++ pdev = &ar71xx_eth1_device; + break; ++ default: ++ printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id); ++ return; + } + -+ ar71xx_mdio_data.phy_mask = phy_mask; -+ -+ platform_device_register(&ar71xx_mdio_device); -+} -+ -+static void ar71xx_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift) -+{ -+ void __iomem *base; -+ u32 t; -+ -+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE); ++ pdata = pdev->dev.platform_data; + -+ t = __raw_readl(base + cfg_reg); -+ t &= ~(3 << shift); -+ t |= (2 << shift); -+ __raw_writel(t, base + cfg_reg); -+ udelay(100); ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ pdata->ddr_flush = id ? ar71xx_ddr_flush_ge1 ++ : ar71xx_ddr_flush_ge0; ++ pdata->set_pll = id ? ar71xx_set_pll_ge1 ++ : ar71xx_set_pll_ge0; ++ break; + -+ __raw_writel(pll_val, base + pll_reg); ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ pdata->ddr_flush = id ? ar71xx_ddr_flush_ge1 ++ : ar71xx_ddr_flush_ge0; ++ pdata->set_pll = id ? ar71xx_set_pll_ge1 ++ : ar71xx_set_pll_ge0; ++ pdata->has_gbit = 1; ++ break; + -+ t |= (3 << shift); -+ __raw_writel(t, base + cfg_reg); -+ udelay(100); ++ case AR71XX_SOC_AR7242: ++ ar71xx_eth0_data.reset_bit |= AR724X_RESET_GE0_MDIO | ++ RESET_MODULE_GE0_PHY; ++ ar71xx_eth1_data.reset_bit |= AR724X_RESET_GE1_MDIO | ++ RESET_MODULE_GE1_PHY; ++ pdata->ddr_flush = id ? ar724x_ddr_flush_ge1 ++ : ar724x_ddr_flush_ge0; ++ pdata->set_pll = id ? ar724x_set_pll_ge1 ++ : ar7242_set_pll_ge0; ++ pdata->has_gbit = 1; ++ pdata->is_ar724x = 1; + -+ t &= ~(3 << shift); -+ __raw_writel(t, base + cfg_reg); -+ udelay(100); ++ if (!pdata->fifo_cfg1) ++ pdata->fifo_cfg1 = 0x0010ffff; ++ if (!pdata->fifo_cfg2) ++ pdata->fifo_cfg2 = 0x015500aa; ++ if (!pdata->fifo_cfg3) ++ pdata->fifo_cfg3 = 0x01f00140; ++ break; + -+ printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n", -+ (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg)); ++ case AR71XX_SOC_AR7241: ++ ar71xx_eth0_data.reset_bit |= AR724X_RESET_GE0_MDIO; ++ ar71xx_eth1_data.reset_bit |= AR724X_RESET_GE1_MDIO; ++ /* fall through */ ++ case AR71XX_SOC_AR7240: ++ ar71xx_eth0_data.reset_bit |= RESET_MODULE_GE0_PHY; ++ ar71xx_eth1_data.reset_bit |= RESET_MODULE_GE1_PHY; ++ pdata->ddr_flush = id ? ar724x_ddr_flush_ge1 ++ : ar724x_ddr_flush_ge0; ++ pdata->set_pll = id ? ar724x_set_pll_ge1 ++ : ar724x_set_pll_ge0; ++ pdata->is_ar724x = 1; ++ if (ar71xx_soc == AR71XX_SOC_AR7240) ++ pdata->is_ar7240 = 1; ++ ++ if (!pdata->fifo_cfg1) ++ pdata->fifo_cfg1 = 0x0010ffff; ++ if (!pdata->fifo_cfg2) ++ pdata->fifo_cfg2 = 0x015500aa; ++ if (!pdata->fifo_cfg3) ++ pdata->fifo_cfg3 = 0x01f00140; ++ break; + -+ iounmap(base); -+} ++ case AR71XX_SOC_AR9130: ++ pdata->ddr_flush = id ? ar91xx_ddr_flush_ge1 ++ : ar91xx_ddr_flush_ge0; ++ pdata->set_pll = id ? ar91xx_set_pll_ge1 ++ : ar91xx_set_pll_ge0; ++ pdata->is_ar91xx = 1; ++ break; + -+struct ar71xx_eth_pll_data ar71xx_eth0_pll_data; -+struct ar71xx_eth_pll_data ar71xx_eth1_pll_data; ++ case AR71XX_SOC_AR9132: ++ pdata->ddr_flush = id ? ar91xx_ddr_flush_ge1 ++ : ar91xx_ddr_flush_ge0; ++ pdata->set_pll = id ? ar91xx_set_pll_ge1 ++ : ar91xx_set_pll_ge0; ++ pdata->is_ar91xx = 1; ++ pdata->has_gbit = 1; ++ break; + -+static u32 ar71xx_get_eth_pll(unsigned int mac, int speed) -+{ -+ struct ar71xx_eth_pll_data *pll_data; -+ u32 pll_val; ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ ar71xx_eth0_data.reset_bit = AR933X_RESET_GE0_MAC | ++ AR933X_RESET_GE0_MDIO; ++ ar71xx_eth1_data.reset_bit = AR933X_RESET_GE1_MAC | ++ AR933X_RESET_GE1_MDIO; ++ pdata->ddr_flush = id ? ar933x_ddr_flush_ge1 ++ : ar933x_ddr_flush_ge0; ++ pdata->set_pll = id ? ar933x_set_pll_ge1 ++ : ar933x_set_pll_ge0; ++ pdata->has_gbit = 1; ++ pdata->is_ar724x = 1; + -+ switch (mac) { -+ case 0: -+ pll_data = &ar71xx_eth0_pll_data; -+ break; -+ case 1: -+ pll_data = &ar71xx_eth1_pll_data; ++ if (!pdata->fifo_cfg1) ++ pdata->fifo_cfg1 = 0x0010ffff; ++ if (!pdata->fifo_cfg2) ++ pdata->fifo_cfg2 = 0x015500aa; ++ if (!pdata->fifo_cfg3) ++ pdata->fifo_cfg3 = 0x01f00140; + break; ++ + default: + BUG(); + } + -+ switch (speed) { -+ case SPEED_10: -+ pll_val = pll_data->pll_10; -+ break; -+ case SPEED_100: -+ pll_val = pll_data->pll_100; -+ break; -+ case SPEED_1000: -+ pll_val = pll_data->pll_1000; -+ break; ++ switch (pdata->phy_if_mode) { ++ case PHY_INTERFACE_MODE_GMII: ++ case PHY_INTERFACE_MODE_RGMII: ++ if (!pdata->has_gbit) { ++ printk(KERN_ERR "ar71xx: no gbit available on eth%d\n", ++ id); ++ return; ++ } ++ /* fallthrough */ + default: -+ BUG(); ++ break; + } + -+ return pll_val; -+} ++ if (!is_valid_ether_addr(pdata->mac_addr)) { ++ random_ether_addr(pdata->mac_addr); ++ printk(KERN_DEBUG ++ "ar71xx: using random MAC address for eth%d\n", ++ ar71xx_eth_instance); ++ } + -+static void ar71xx_set_pll_ge0(int speed) -+{ -+ u32 val = ar71xx_get_eth_pll(0, speed); ++ if (pdata->mii_bus_dev == NULL) ++ pdata->mii_bus_dev = &ar71xx_mdio_device.dev; + -+ ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK, -+ val, AR71XX_ETH0_PLL_SHIFT); -+} ++ /* Reset the device */ ++ ar71xx_device_stop(pdata->reset_bit); ++ mdelay(100); + -+static void ar71xx_set_pll_ge1(int speed) -+{ -+ u32 val = ar71xx_get_eth_pll(1, speed); ++ ar71xx_device_start(pdata->reset_bit); ++ mdelay(100); + -+ ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK, -+ val, AR71XX_ETH1_PLL_SHIFT); ++ platform_device_register(pdev); ++ ar71xx_eth_instance++; +} + -+static void ar724x_set_pll_ge0(int speed) ++static struct resource ar71xx_spi_resources[] = { ++ [0] = { ++ .start = AR71XX_SPI_BASE, ++ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static struct platform_device ar71xx_spi_device = { ++ .name = "ar71xx-spi", ++ .id = -1, ++ .resource = ar71xx_spi_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_spi_resources), ++}; ++ ++void __init ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata, ++ struct spi_board_info const *info, ++ unsigned n) +{ -+ /* TODO */ ++ spi_register_board_info(info, n); ++ ar71xx_spi_device.dev.platform_data = pdata; ++ platform_device_register(&ar71xx_spi_device); +} + -+static void ar724x_set_pll_ge1(int speed) ++void __init ar71xx_add_device_wdt(void) +{ -+ /* TODO */ ++ platform_device_register_simple("ar71xx-wdt", -1, NULL, 0); +} + -+static void ar91xx_set_pll_ge0(int speed) ++void __init ar71xx_set_mac_base(unsigned char *mac) +{ -+ u32 val = ar71xx_get_eth_pll(0, speed); -+ -+ ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH0_INT_CLOCK, -+ val, AR91XX_ETH0_PLL_SHIFT); ++ memcpy(ar71xx_mac_base, mac, ETH_ALEN); +} + -+static void ar91xx_set_pll_ge1(int speed) ++void __init ar71xx_parse_mac_addr(char *mac_str) +{ -+ u32 val = ar71xx_get_eth_pll(1, speed); ++ u8 tmp[ETH_ALEN]; ++ int t; + -+ ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH1_INT_CLOCK, -+ val, AR91XX_ETH1_PLL_SHIFT); -+} ++ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", ++ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); + -+static void ar71xx_ddr_flush_ge0(void) -+{ -+ ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE0); -+} ++ if (t != ETH_ALEN) ++ t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx", ++ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); + -+static void ar71xx_ddr_flush_ge1(void) -+{ -+ ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE1); ++ if (t == ETH_ALEN) ++ ar71xx_set_mac_base(tmp); ++ else ++ printk(KERN_DEBUG "ar71xx: failed to parse mac address " ++ "\"%s\"\n", mac_str); +} + -+static void ar724x_ddr_flush_ge0(void) ++static int __init ar71xx_ethaddr_setup(char *str) +{ -+ ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE0); ++ ar71xx_parse_mac_addr(str); ++ return 1; +} ++__setup("ethaddr=", ar71xx_ethaddr_setup); + -+static void ar724x_ddr_flush_ge1(void) ++static int __init ar71xx_kmac_setup(char *str) +{ -+ ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE1); ++ ar71xx_parse_mac_addr(str); ++ return 1; +} ++__setup("kmac=", ar71xx_kmac_setup); + -+static void ar91xx_ddr_flush_ge0(void) ++void __init ar71xx_init_mac(unsigned char *dst, const unsigned char *src, ++ unsigned offset) +{ -+ ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE0); -+} ++ u32 t; + -+static void ar91xx_ddr_flush_ge1(void) -+{ -+ ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE1); ++ if (!is_valid_ether_addr(src)) { ++ memset(dst, '\0', ETH_ALEN); ++ return; ++ } ++ ++ t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]); ++ t += offset; ++ ++ dst[0] = src[0]; ++ dst[1] = src[1]; ++ dst[2] = src[2]; ++ dst[3] = (t >> 16) & 0xff; ++ dst[4] = (t >> 8) & 0xff; ++ dst[5] = t & 0xff; +} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/devices.h linux-2.6.39/arch/mips/ar71xx/devices.h +--- linux-2.6.39.orig/arch/mips/ar71xx/devices.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/devices.h 2011-08-24 02:41:55.347990727 +0200 +@@ -0,0 +1,50 @@ ++/* ++ * Atheros AR71xx SoC device definitions ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+static struct resource ar71xx_eth0_resources[] = { -+ { -+ .name = "mac_base", -+ .flags = IORESOURCE_MEM, -+ .start = AR71XX_GE0_BASE, -+ .end = AR71XX_GE0_BASE + 0x200 - 1, -+ }, { -+ .name = "mii_ctrl", -+ .flags = IORESOURCE_MEM, -+ .start = AR71XX_MII_BASE + MII_REG_MII0_CTRL, -+ .end = AR71XX_MII_BASE + MII_REG_MII0_CTRL + 3, -+ }, { -+ .name = "mac_irq", -+ .flags = IORESOURCE_IRQ, -+ .start = AR71XX_CPU_IRQ_GE0, -+ .end = AR71XX_CPU_IRQ_GE0, -+ }, -+}; ++#ifndef __AR71XX_DEVICES_H ++#define __AR71XX_DEVICES_H + -+struct ag71xx_platform_data ar71xx_eth0_data = { -+ .reset_bit = RESET_MODULE_GE0_MAC, -+}; ++#include + -+struct platform_device ar71xx_eth0_device = { -+ .name = "ag71xx", -+ .id = 0, -+ .resource = ar71xx_eth0_resources, -+ .num_resources = ARRAY_SIZE(ar71xx_eth0_resources), -+ .dev = { -+ .platform_data = &ar71xx_eth0_data, -+ }, -+}; ++struct platform_device; + -+static struct resource ar71xx_eth1_resources[] = { -+ { -+ .name = "mac_base", -+ .flags = IORESOURCE_MEM, -+ .start = AR71XX_GE1_BASE, -+ .end = AR71XX_GE1_BASE + 0x200 - 1, -+ }, { -+ .name = "mii_ctrl", -+ .flags = IORESOURCE_MEM, -+ .start = AR71XX_MII_BASE + MII_REG_MII1_CTRL, -+ .end = AR71XX_MII_BASE + MII_REG_MII1_CTRL + 3, -+ }, { -+ .name = "mac_irq", -+ .flags = IORESOURCE_IRQ, -+ .start = AR71XX_CPU_IRQ_GE1, -+ .end = AR71XX_CPU_IRQ_GE1, -+ }, -+}; ++void ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata, ++ struct spi_board_info const *info, ++ unsigned n) __init; + -+struct ag71xx_platform_data ar71xx_eth1_data = { -+ .reset_bit = RESET_MODULE_GE1_MAC, -+}; ++extern unsigned char ar71xx_mac_base[] __initdata; ++void ar71xx_parse_mac_addr(char *mac_str) __init; ++void ar71xx_init_mac(unsigned char *dst, const unsigned char *src, ++ unsigned offset) __init; + -+struct platform_device ar71xx_eth1_device = { -+ .name = "ag71xx", -+ .id = 1, -+ .resource = ar71xx_eth1_resources, -+ .num_resources = ARRAY_SIZE(ar71xx_eth1_resources), -+ .dev = { -+ .platform_data = &ar71xx_eth1_data, -+ }, ++struct ar71xx_eth_pll_data { ++ u32 pll_10; ++ u32 pll_100; ++ u32 pll_1000; +}; + -+#define AR71XX_PLL_VAL_1000 0x00110000 -+#define AR71XX_PLL_VAL_100 0x00001099 -+#define AR71XX_PLL_VAL_10 0x00991099 -+ -+#define AR724X_PLL_VAL_1000 0x00110000 -+#define AR724X_PLL_VAL_100 0x00001099 -+#define AR724X_PLL_VAL_10 0x00991099 ++extern struct ar71xx_eth_pll_data ar71xx_eth0_pll_data; ++extern struct ar71xx_eth_pll_data ar71xx_eth1_pll_data; + -+#define AR91XX_PLL_VAL_1000 0x1a000000 -+#define AR91XX_PLL_VAL_100 0x13000a44 -+#define AR91XX_PLL_VAL_10 0x00441099 ++extern struct ag71xx_platform_data ar71xx_eth0_data; ++extern struct ag71xx_platform_data ar71xx_eth1_data; ++extern struct platform_device ar71xx_eth0_device; ++extern struct platform_device ar71xx_eth1_device; ++void ar71xx_add_device_eth(unsigned int id) __init; + -+static void __init ar71xx_init_eth_pll_data(unsigned int id) -+{ -+ struct ar71xx_eth_pll_data *pll_data; -+ u32 pll_10, pll_100, pll_1000; ++extern struct platform_device ar71xx_mdio_device; ++void ar71xx_add_device_mdio(u32 phy_mask) __init; + -+ switch (id) { -+ case 0: -+ pll_data = &ar71xx_eth0_pll_data; -+ break; -+ case 1: -+ pll_data = &ar71xx_eth1_pll_data; -+ break; -+ default: -+ BUG(); -+ } ++void ar71xx_add_device_uart(void) __init; + -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ pll_10 = AR71XX_PLL_VAL_10; -+ pll_100 = AR71XX_PLL_VAL_100; -+ pll_1000 = AR71XX_PLL_VAL_1000; -+ break; ++void ar71xx_add_device_wdt(void) __init; + -+ case AR71XX_SOC_AR7240: -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ pll_10 = AR724X_PLL_VAL_10; -+ pll_100 = AR724X_PLL_VAL_100; -+ pll_1000 = AR724X_PLL_VAL_1000; -+ break; -+ -+ case AR71XX_SOC_AR9130: -+ case AR71XX_SOC_AR9132: -+ pll_10 = AR91XX_PLL_VAL_10; -+ pll_100 = AR91XX_PLL_VAL_100; -+ pll_1000 = AR91XX_PLL_VAL_1000; -+ break; -+ default: -+ BUG(); -+ } -+ -+ if (!pll_data->pll_10) -+ pll_data->pll_10 = pll_10; ++#endif /* __AR71XX_DEVICES_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c 2011-08-24 02:41:55.347990727 +0200 +@@ -0,0 +1,57 @@ ++/* ++ * Atheros AR71xx GPIO LED device support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ if (!pll_data->pll_100) -+ pll_data->pll_100 = pll_100; ++#include ++#include ++#include + -+ if (!pll_data->pll_1000) -+ pll_data->pll_1000 = pll_1000; -+} ++#include "dev-leds-gpio.h" + -+static int ar71xx_eth_instance __initdata; -+void __init ar71xx_add_device_eth(unsigned int id) ++void __init ar71xx_add_device_leds_gpio(int id, unsigned num_leds, ++ struct gpio_led *leds) +{ + struct platform_device *pdev; -+ struct ag71xx_platform_data *pdata; -+ -+ ar71xx_init_eth_pll_data(id); ++ struct gpio_led_platform_data pdata; ++ struct gpio_led *p; ++ int err; + -+ switch (id) { -+ case 0: -+ switch (ar71xx_eth0_data.phy_if_mode) { -+ case PHY_INTERFACE_MODE_MII: -+ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_MII; -+ break; -+ case PHY_INTERFACE_MODE_GMII: -+ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_GMII; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_RGMII; -+ break; -+ case PHY_INTERFACE_MODE_RMII: -+ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_RMII; -+ break; -+ default: -+ printk(KERN_ERR "ar71xx: invalid PHY interface mode " -+ "for eth0\n"); -+ return; -+ } -+ pdev = &ar71xx_eth0_device; -+ break; -+ case 1: -+ switch (ar71xx_eth1_data.phy_if_mode) { -+ case PHY_INTERFACE_MODE_RMII: -+ ar71xx_eth1_data.mii_if = MII1_CTRL_IF_RMII; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ ar71xx_eth1_data.mii_if = MII1_CTRL_IF_RGMII; -+ break; -+ default: -+ printk(KERN_ERR "ar71xx: invalid PHY interface mode " -+ "for eth1\n"); -+ return; -+ } -+ pdev = &ar71xx_eth1_device; -+ break; -+ default: -+ printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id); ++ p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); ++ if (!p) + return; -+ } + -+ pdata = pdev->dev.platform_data; ++ memcpy(p, leds, num_leds * sizeof(*p)); + -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7130: -+ pdata->ddr_flush = id ? ar71xx_ddr_flush_ge1 -+ : ar71xx_ddr_flush_ge0; -+ pdata->set_pll = id ? ar71xx_set_pll_ge1 -+ : ar71xx_set_pll_ge0; -+ break; ++ pdev = platform_device_alloc("leds-gpio", id); ++ if (!pdev) ++ goto err_free_leds; + -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ pdata->ddr_flush = id ? ar71xx_ddr_flush_ge1 -+ : ar71xx_ddr_flush_ge0; -+ pdata->set_pll = id ? ar71xx_set_pll_ge1 -+ : ar71xx_set_pll_ge0; -+ pdata->has_gbit = 1; -+ break; ++ memset(&pdata, 0, sizeof(pdata)); ++ pdata.num_leds = num_leds; ++ pdata.leds = p; + -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ ar71xx_eth0_data.reset_bit |= AR724X_RESET_GE0_MDIO; -+ ar71xx_eth1_data.reset_bit |= AR724X_RESET_GE1_MDIO; -+ /* fall through */ -+ case AR71XX_SOC_AR7240: -+ pdata->ddr_flush = id ? ar724x_ddr_flush_ge1 -+ : ar724x_ddr_flush_ge0; -+ pdata->set_pll = id ? ar724x_set_pll_ge1 -+ : ar724x_set_pll_ge0; -+ pdata->is_ar724x = 1; -+ break; ++ err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); ++ if (err) ++ goto err_put_pdev; + -+ case AR71XX_SOC_AR9130: -+ pdata->ddr_flush = id ? ar91xx_ddr_flush_ge1 -+ : ar91xx_ddr_flush_ge0; -+ pdata->set_pll = id ? ar91xx_set_pll_ge1 -+ : ar91xx_set_pll_ge0; -+ pdata->is_ar91xx = 1; -+ break; ++ err = platform_device_add(pdev); ++ if (err) ++ goto err_put_pdev; + -+ case AR71XX_SOC_AR9132: -+ pdata->ddr_flush = id ? ar91xx_ddr_flush_ge1 -+ : ar91xx_ddr_flush_ge0; -+ pdata->set_pll = id ? ar91xx_set_pll_ge1 -+ : ar91xx_set_pll_ge0; -+ pdata->is_ar91xx = 1; -+ pdata->has_gbit = 1; -+ break; ++ return; + -+ default: -+ BUG(); -+ } ++err_put_pdev: ++ platform_device_put(pdev); + -+ switch (pdata->phy_if_mode) { -+ case PHY_INTERFACE_MODE_GMII: -+ case PHY_INTERFACE_MODE_RGMII: -+ if (!pdata->has_gbit) { -+ printk(KERN_ERR "ar71xx: no gbit available on eth%d\n", -+ id); -+ return; -+ } -+ /* fallthrough */ -+ default: -+ break; -+ } ++err_free_leds: ++ kfree(p); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h 2011-08-24 02:41:55.367990903 +0200 +@@ -0,0 +1,21 @@ ++/* ++ * Atheros AR71xx GPIO LED device support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ if (is_valid_ether_addr(ar71xx_mac_base)) { -+ memcpy(pdata->mac_addr, ar71xx_mac_base, ETH_ALEN); -+ pdata->mac_addr[5] += ar71xx_eth_instance; -+ } else { -+ random_ether_addr(pdata->mac_addr); -+ printk(KERN_DEBUG -+ "ar71xx: using random MAC address for eth%d\n", -+ ar71xx_eth_instance); -+ } ++#ifndef _AR71XX_DEV_LEDS_GPIO_H ++#define _AR71XX_DEV_LEDS_GPIO_H + -+ if (pdata->mii_bus_dev == NULL) -+ pdata->mii_bus_dev = &ar71xx_mdio_device.dev; ++#include + -+ /* Reset the device */ -+ ar71xx_device_stop(pdata->reset_bit); -+ mdelay(100); ++void ar71xx_add_device_leds_gpio(int id, ++ unsigned num_leds, ++ struct gpio_led *leds) __init; + -+ ar71xx_device_start(pdata->reset_bit); -+ mdelay(100); ++#endif /* _AR71XX_DEV_LEDS_GPIO_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c 2011-08-24 02:41:55.367990903 +0200 +@@ -0,0 +1,30 @@ ++/* ++ * Copyright (C) 2009 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ platform_device_register(pdev); -+ ar71xx_eth_instance++; -+} ++#include ++#include ++#include + -+static struct resource ar71xx_spi_resources[] = { -+ [0] = { -+ .start = AR71XX_SPI_BASE, -+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; ++#include "devices.h" ++#include "dev-m25p80.h" + -+static struct platform_device ar71xx_spi_device = { -+ .name = "ar71xx-spi", -+ .id = -1, -+ .resource = ar71xx_spi_resources, -+ .num_resources = ARRAY_SIZE(ar71xx_spi_resources), ++static struct spi_board_info ar71xx_spi_info[] = { ++ { ++ .bus_num = 0, ++ .chip_select = 0, ++ .max_speed_hz = 25000000, ++ .modalias = "m25p80", ++ } +}; + -+void __init ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata, -+ struct spi_board_info const *info, -+ unsigned n) ++void __init ar71xx_add_device_m25p80(struct flash_platform_data *pdata) +{ -+ spi_register_board_info(info, n); -+ ar71xx_spi_device.dev.platform_data = pdata; -+ platform_device_register(&ar71xx_spi_device); ++ ar71xx_spi_info[0].platform_data = pdata; ++ ar71xx_add_device_spi(NULL, ar71xx_spi_info, ++ ARRAY_SIZE(ar71xx_spi_info)); +} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h 2011-08-24 02:41:55.377990515 +0200 +@@ -0,0 +1,16 @@ ++/* ++ * Copyright (C) 2009 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+void __init ar71xx_add_device_wdt(void) -+{ -+ platform_device_register_simple("ar71xx-wdt", -1, NULL, 0); -+} -+ -+void __init ar71xx_set_mac_base(unsigned char *mac) -+{ -+ memcpy(ar71xx_mac_base, mac, ETH_ALEN); -+} -+ -+void __init ar71xx_parse_mac_addr(char *mac_str) -+{ -+ u8 tmp[ETH_ALEN]; -+ int t; -+ -+ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", -+ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); -+ -+ if (t != ETH_ALEN) -+ t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx", -+ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); ++#ifndef _AR71XX_DEV_M25P80_H ++#define _AR71XX_DEV_M25P80_H + -+ if (t == ETH_ALEN) -+ ar71xx_set_mac_base(tmp); -+ else -+ printk(KERN_DEBUG "ar71xx: failed to parse mac address " -+ "\"%s\"\n", mac_str); -+} ++#include + -+static int __init ar71xx_ethaddr_setup(char *str) -+{ -+ ar71xx_parse_mac_addr(str); -+ return 1; -+} -+__setup("ethaddr=", ar71xx_ethaddr_setup); ++void ar71xx_add_device_m25p80(struct flash_platform_data *pdata) __init; + -+static int __init ar71xx_kmac_setup(char *str) -+{ -+ ar71xx_parse_mac_addr(str); -+ return 1; -+} -+__setup("kmac=", ar71xx_kmac_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/devices.h linux-2.6.39/arch/mips/ar71xx/devices.h ---- linux-2.6.39.orig/arch/mips/ar71xx/devices.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/devices.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,48 @@ ++#endif /* _AR71XX_DEV_M25P80_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c 2011-08-24 02:41:55.377990515 +0200 +@@ -0,0 +1,40 @@ +/* -+ * Atheros AR71xx SoC device definitions ++ * Atheros PB42 reference board PCI initialization + * + * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#ifndef __AR71XX_DEVICES_H -+#define __AR71XX_DEVICES_H -+ -+#include -+ -+struct platform_device; ++#include + -+void ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata, -+ struct spi_board_info const *info, -+ unsigned n) __init; ++#include ++#include + -+void ar71xx_set_mac_base(unsigned char *mac) __init; -+void ar71xx_parse_mac_addr(char *mac_str) __init; ++#include "dev-pb42-pci.h" + -+struct ar71xx_eth_pll_data { -+ u32 pll_10; -+ u32 pll_100; -+ u32 pll_1000; ++static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = { ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, ++ }, { ++ .slot = 1, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV1, ++ }, { ++ .slot = 2, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV2, ++ } +}; + -+extern struct ar71xx_eth_pll_data ar71xx_eth0_pll_data; -+extern struct ar71xx_eth_pll_data ar71xx_eth1_pll_data; -+ -+extern struct ag71xx_platform_data ar71xx_eth0_data; -+extern struct ag71xx_platform_data ar71xx_eth1_data; -+extern struct platform_device ar71xx_eth0_device; -+extern struct platform_device ar71xx_eth1_device; -+void ar71xx_add_device_eth(unsigned int id) __init; -+ -+extern struct platform_device ar71xx_mdio_device; -+void ar71xx_add_device_mdio(u32 phy_mask) __init; ++void __init pb42_pci_init(void) ++{ ++ ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.h linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h 2011-08-24 02:41:55.387991243 +0200 +@@ -0,0 +1,21 @@ ++/* ++ * Atheros PB42 reference board PCI initialization ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+void ar71xx_add_device_uart(void) __init; ++#ifndef _AR71XX_DEV_PB42_PCI_H ++#define _AR71XX_DEV_PB42_PCI_H + -+void ar71xx_add_device_wdt(void) __init; ++#if defined(CONFIG_AR71XX_DEV_PB42_PCI) ++void pb42_pci_init(void) __init; ++#else ++static inline void pb42_pci_init(void) { } ++#endif + -+#endif /* __AR71XX_DEVICES_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/early_printk.c linux-2.6.39/arch/mips/ar71xx/early_printk.c ---- linux-2.6.39.orig/arch/mips/ar71xx/early_printk.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/early_printk.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,30 @@ ++#endif /* _AR71XX_DEV_PB42_PCI_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.c linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c 2011-08-24 02:41:55.387991243 +0200 +@@ -0,0 +1,33 @@ +/* -+ * Atheros AR71xx SoC early printk support ++ * Atheros PB9x reference board PCI initialization + * ++ * Copyright (C) 2010 Felix Fietkau + * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include -+#include ++#include + +#include ++#include + -+#define UART_READ(r) \ -+ __raw_readl((void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE) + 4 * (r))) ++#include "dev-pb9x-pci.h" + -+#define UART_WRITE(r, v) \ -+ __raw_writel((v), (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE) + 4*(r))) ++static struct ar71xx_pci_irq pb9x_pci_irqs[] __initdata = { ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, ++ } ++}; + -+void prom_putchar(unsigned char ch) ++void __init pb9x_pci_init(void) +{ -+ while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); -+ UART_WRITE(UART_TX, ch); -+ while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0); ++ ar71xx_pci_init(ARRAY_SIZE(pb9x_pci_irqs), pb9x_pci_irqs); +} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.h linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h 2011-08-24 02:41:55.387991243 +0200 +@@ -0,0 +1,22 @@ ++/* ++ * Atheros PB9x reference board PCI initialization ++ * ++ * Copyright (C) 2010 Felix Fietkau ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/gpio.c linux-2.6.39/arch/mips/ar71xx/gpio.c ---- linux-2.6.39.orig/arch/mips/ar71xx/gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/gpio.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,182 @@ ++#ifndef _AR71XX_DEV_PB9X_PCI_H ++#define _AR71XX_DEV_PB9X_PCI_H ++ ++#if defined(CONFIG_AR71XX_DEV_PB9X_PCI) ++void pb9x_pci_init(void) __init; ++#else ++static inline void pb9x_pci_init(void) { } ++#endif ++ ++#endif /* _AR71XX_DEV_PB9X_PCI_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.c linux-2.6.39/arch/mips/ar71xx/dev-usb.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-usb.c 2011-08-24 02:41:55.417990329 +0200 +@@ -0,0 +1,199 @@ +/* -+ * Atheros AR71xx SoC GPIO API support ++ * Atheros AR71xx USB host device support + * -+ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. @@ -2420,36 +2008,358 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/gpio.c linux-2.6.39/arch/mips/ar71x + +#include +#include -+#include -+#include -+#include -+#include -+#include -+#include ++#include ++#include ++#include + +#include ++#include + -+static DEFINE_SPINLOCK(ar71xx_gpio_lock); ++#include "dev-usb.h" + -+unsigned long ar71xx_gpio_count; -+EXPORT_SYMBOL(ar71xx_gpio_count); ++/* ++ * OHCI (USB full speed host controller) ++ */ ++static struct resource ar71xx_ohci_resources[] = { ++ [0] = { ++ .start = AR71XX_OHCI_BASE, ++ .end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AR71XX_MISC_IRQ_OHCI, ++ .end = AR71XX_MISC_IRQ_OHCI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; + -+void __ar71xx_gpio_set_value(unsigned gpio, int value) -+{ -+ void __iomem *base = ar71xx_gpio_base; ++static struct resource ar7240_ohci_resources[] = { ++ [0] = { ++ .start = AR7240_OHCI_BASE, ++ .end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AR71XX_CPU_IRQ_USB, ++ .end = AR71XX_CPU_IRQ_USB, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; + -+ if (value) -+ __raw_writel(1 << gpio, base + GPIO_REG_SET); -+ else -+ __raw_writel(1 << gpio, base + GPIO_REG_CLEAR); -+} -+EXPORT_SYMBOL(__ar71xx_gpio_set_value); ++static u64 ar71xx_ohci_dmamask = DMA_BIT_MASK(32); ++static struct platform_device ar71xx_ohci_device = { ++ .name = "ar71xx-ohci", ++ .id = -1, ++ .resource = ar71xx_ohci_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_ohci_resources), ++ .dev = { ++ .dma_mask = &ar71xx_ohci_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++}; + -+int __ar71xx_gpio_get_value(unsigned gpio) -+{ -+ return (__raw_readl(ar71xx_gpio_base + GPIO_REG_IN) >> gpio) & 1; -+} -+EXPORT_SYMBOL(__ar71xx_gpio_get_value); ++/* ++ * EHCI (USB high/full speed host controller) ++ */ ++static struct resource ar71xx_ehci_resources[] = { ++ [0] = { ++ .start = AR71XX_EHCI_BASE, ++ .end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AR71XX_CPU_IRQ_USB, ++ .end = AR71XX_CPU_IRQ_USB, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static u64 ar71xx_ehci_dmamask = DMA_BIT_MASK(32); ++static struct ar71xx_ehci_platform_data ar71xx_ehci_data; ++ ++static struct platform_device ar71xx_ehci_device = { ++ .name = "ar71xx-ehci", ++ .id = -1, ++ .resource = ar71xx_ehci_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_ehci_resources), ++ .dev = { ++ .dma_mask = &ar71xx_ehci_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ .platform_data = &ar71xx_ehci_data, ++ }, ++}; ++ ++#define AR71XX_USB_RESET_MASK \ ++ (RESET_MODULE_USB_HOST | RESET_MODULE_USB_PHY \ ++ | RESET_MODULE_USB_OHCI_DLL) ++ ++#define AR7240_USB_RESET_MASK \ ++ (RESET_MODULE_USB_HOST | RESET_MODULE_USB_OHCI_DLL_7240) ++ ++static void __init ar71xx_usb_setup(void) ++{ ++ ar71xx_device_stop(AR71XX_USB_RESET_MASK); ++ mdelay(1000); ++ ar71xx_device_start(AR71XX_USB_RESET_MASK); ++ ++ /* Turning on the Buff and Desc swap bits */ ++ ar71xx_usb_ctrl_wr(USB_CTRL_REG_CONFIG, 0xf0000); ++ ++ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ ++ ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x20c00); ++ ++ mdelay(900); ++ ++ platform_device_register(&ar71xx_ohci_device); ++ platform_device_register(&ar71xx_ehci_device); ++} ++ ++static void __init ar7240_usb_setup(void) ++{ ++ ar71xx_device_stop(AR7240_USB_RESET_MASK); ++ mdelay(1000); ++ ar71xx_device_start(AR7240_USB_RESET_MASK); ++ ++ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ ++ ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x3); ++ ++ ar71xx_ohci_device.resource = ar7240_ohci_resources; ++ ar71xx_ohci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); ++ platform_device_register(&ar71xx_ohci_device); ++} ++ ++static void __init ar7241_usb_setup(void) ++{ ++ ar71xx_device_start(AR724X_RESET_USBSUS_OVERRIDE); ++ mdelay(10); ++ ++ ar71xx_device_start(AR724X_RESET_USB_HOST); ++ mdelay(10); ++ ++ ar71xx_device_start(AR724X_RESET_USB_PHY); ++ mdelay(10); ++ ++ ar71xx_ehci_data.is_ar91xx = 1; ++ ar71xx_ehci_device.resource = ar7240_ohci_resources; ++ ar71xx_ehci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); ++ platform_device_register(&ar71xx_ehci_device); ++} ++ ++static void __init ar91xx_usb_setup(void) ++{ ++ ar71xx_device_stop(RESET_MODULE_USBSUS_OVERRIDE); ++ mdelay(10); ++ ++ ar71xx_device_start(RESET_MODULE_USB_HOST); ++ mdelay(10); ++ ++ ar71xx_device_start(RESET_MODULE_USB_PHY); ++ mdelay(10); ++ ++ ar71xx_ehci_data.is_ar91xx = 1; ++ platform_device_register(&ar71xx_ehci_device); ++} ++ ++void __init ar71xx_add_device_usb(void) ++{ ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7240: ++ ar7240_usb_setup(); ++ break; ++ ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ ar7241_usb_setup(); ++ break; ++ ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ ar71xx_usb_setup(); ++ break; ++ ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ ar91xx_usb_setup(); ++ break; ++ ++ default: ++ BUG(); ++ } ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.h linux-2.6.39/arch/mips/ar71xx/dev-usb.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-usb.h 2011-08-24 02:41:55.427989786 +0200 +@@ -0,0 +1,17 @@ ++/* ++ * Atheros AR71xx USB host device support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_USB_H ++#define _AR71XX_DEV_USB_H ++ ++void ar71xx_add_device_usb(void) __init; ++ ++#endif /* _AR71XX_DEV_USB_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/early_printk.c linux-2.6.39/arch/mips/ar71xx/early_printk.c +--- linux-2.6.39.orig/arch/mips/ar71xx/early_printk.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/early_printk.c 2011-08-24 02:41:55.427989786 +0200 +@@ -0,0 +1,96 @@ ++/* ++ * Atheros AR7xxx/AR9xxx SoC early printk support ++ * ++ * Copyright (C) 2008-2011 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static void (*_prom_putchar) (unsigned char); ++ ++static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val) ++{ ++ u32 t; ++ ++ do { ++ t = __raw_readl(reg); ++ if ((t & mask) == val) ++ break; ++ } while (1); ++} ++ ++static void prom_putchar_ar71xx(unsigned char ch) ++{ ++ void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE)); ++ ++ prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); ++ __raw_writel(ch, base + UART_TX * 4); ++ prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); ++} ++ ++static void prom_putchar_ar933x(unsigned char ch) ++{ ++ void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE)); ++ ++ prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, ++ AR933X_UART_DATA_TX_CSR); ++ __raw_writel(AR933X_UART_DATA_TX_CSR | ch, base + AR933X_UART_DATA_REG); ++ prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, ++ AR933X_UART_DATA_TX_CSR); ++} ++ ++static void prom_putchar_dummy(unsigned char ch) ++{ ++ /* nothing to do */ ++} ++ ++static void prom_putchar_init(void) ++{ ++ void __iomem *base; ++ u32 id; ++ ++ base = (void __iomem *)(KSEG1ADDR(AR71XX_RESET_BASE)); ++ id = __raw_readl(base + AR71XX_RESET_REG_REV_ID); ++ id &= REV_ID_MAJOR_MASK; ++ ++ switch (id) { ++ case REV_ID_MAJOR_AR71XX: ++ case REV_ID_MAJOR_AR7240: ++ case REV_ID_MAJOR_AR7241: ++ case REV_ID_MAJOR_AR7242: ++ case REV_ID_MAJOR_AR913X: ++ case REV_ID_MAJOR_AR9341: ++ case REV_ID_MAJOR_AR9342: ++ case REV_ID_MAJOR_AR9344: ++ _prom_putchar = prom_putchar_ar71xx; ++ break; ++ ++ case REV_ID_MAJOR_AR9330: ++ case REV_ID_MAJOR_AR9331: ++ _prom_putchar = prom_putchar_ar933x; ++ break; ++ ++ default: ++ _prom_putchar = prom_putchar_dummy; ++ break; ++ } ++} ++ ++void prom_putchar(unsigned char ch) ++{ ++ if (!_prom_putchar) ++ prom_putchar_init(); ++ ++ _prom_putchar(ch); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/gpio.c linux-2.6.39/arch/mips/ar71xx/gpio.c +--- linux-2.6.39.orig/arch/mips/ar71xx/gpio.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/gpio.c 2011-08-24 02:41:55.457989607 +0200 +@@ -0,0 +1,193 @@ ++/* ++ * Atheros AR7XXX/AR9XXX SoC GPIO API support ++ * ++ * Copyright (C) 2008-2011 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++static DEFINE_SPINLOCK(ar71xx_gpio_lock); ++ ++unsigned long ar71xx_gpio_count; ++EXPORT_SYMBOL(ar71xx_gpio_count); ++ ++void __ar71xx_gpio_set_value(unsigned gpio, int value) ++{ ++ void __iomem *base = ar71xx_gpio_base; ++ ++ if (value) ++ __raw_writel(1 << gpio, base + GPIO_REG_SET); ++ else ++ __raw_writel(1 << gpio, base + GPIO_REG_CLEAR); ++} ++EXPORT_SYMBOL(__ar71xx_gpio_set_value); ++ ++int __ar71xx_gpio_get_value(unsigned gpio) ++{ ++ return (__raw_readl(ar71xx_gpio_base + GPIO_REG_IN) >> gpio) & 1; ++} ++EXPORT_SYMBOL(__ar71xx_gpio_get_value); + +static int ar71xx_gpio_get_value(struct gpio_chip *chip, unsigned offset) +{ @@ -2581,6 +2491,17 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/gpio.c linux-2.6.39/arch/mips/ar71x + ar71xx_gpio_chip.ngpio = AR91XX_GPIO_COUNT; + break; + ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ ar71xx_gpio_chip.ngpio = AR933X_GPIO_COUNT; ++ break; ++ ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ ar71xx_gpio_chip.ngpio = AR934X_GPIO_COUNT; ++ break; ++ + default: + BUG(); + } @@ -2591,15 +2512,17 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/gpio.c linux-2.6.39/arch/mips/ar71x +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx/irq.c --- linux-2.6.39.orig/arch/mips/ar71xx/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/irq.c 2011-06-01 13:50:58.000000000 +0200 -@@ -0,0 +1,293 @@ ++++ linux-2.6.39/arch/mips/ar71xx/irq.c 2011-08-24 02:41:55.457989607 +0200 +@@ -0,0 +1,377 @@ +/* + * Atheros AR71xx SoC specific interrupt handling + * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan + * Copyright (C) 2008-2010 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.31 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -2616,8 +2539,6 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + +#include + -+static int ip2_flush_reg; -+ +static void ar71xx_gpio_irq_dispatch(void) +{ + void __iomem *base = ar71xx_gpio_base; @@ -2634,13 +2555,12 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + +static void ar71xx_gpio_irq_unmask(struct irq_data *d) +{ ++ unsigned int irq = d->irq - AR71XX_GPIO_IRQ_BASE; + void __iomem *base = ar71xx_gpio_base; + u32 t; + -+ d->irq -= AR71XX_GPIO_IRQ_BASE; -+ + t = __raw_readl(base + GPIO_REG_INT_ENABLE); -+ __raw_writel(t | (1 << d->irq), base + GPIO_REG_INT_ENABLE); ++ __raw_writel(t | (1 << irq), base + GPIO_REG_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + GPIO_REG_INT_ENABLE); @@ -2648,34 +2568,22 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + +static void ar71xx_gpio_irq_mask(struct irq_data *d) +{ ++ unsigned int irq = d->irq - AR71XX_GPIO_IRQ_BASE; + void __iomem *base = ar71xx_gpio_base; + u32 t; + -+ d->irq -= AR71XX_GPIO_IRQ_BASE; -+ + t = __raw_readl(base + GPIO_REG_INT_ENABLE); -+ __raw_writel(t & ~(1 << d->irq), base + GPIO_REG_INT_ENABLE); ++ __raw_writel(t & ~(1 << irq), base + GPIO_REG_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + GPIO_REG_INT_ENABLE); +} + -+#if 0 -+static int ar71xx_gpio_irq_set_type(unsigned int irq, unsigned int flow_type) -+{ -+ /* TODO: implement */ -+ return 0; -+} -+#else -+#define ar71xx_gpio_irq_set_type NULL -+#endif -+ +static struct irq_chip ar71xx_gpio_irq_chip = { + .name = "AR71XX GPIO", -+ .irq_unmask = ar71xx_gpio_irq_unmask, -+ .irq_mask = ar71xx_gpio_irq_mask, ++ .irq_unmask = ar71xx_gpio_irq_unmask, ++ .irq_mask = ar71xx_gpio_irq_mask, + .irq_mask_ack = ar71xx_gpio_irq_mask, -+ .irq_set_type = ar71xx_gpio_irq_set_type, +}; + +static struct irqaction ar71xx_gpio_irqaction = { @@ -2683,7 +2591,6 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + .name = "cascade [AR71XX GPIO]", +}; + -+#define GPIO_IRQ_INIT_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH) +#define GPIO_INT_ALL 0xffff + +static void __init ar71xx_gpio_irq_init(void) @@ -2701,10 +2608,9 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + __raw_writel(GPIO_INT_ALL, base + GPIO_REG_INT_POLARITY); + + for (i = AR71XX_GPIO_IRQ_BASE; -+ i < AR71XX_GPIO_IRQ_BASE + AR71XX_GPIO_IRQ_COUNT; i++) { ++ i < AR71XX_GPIO_IRQ_BASE + AR71XX_GPIO_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &ar71xx_gpio_irq_chip, + handle_level_irq); -+ } + + setup_irq(AR71XX_MISC_IRQ_GPIO, &ar71xx_gpio_irqaction); +} @@ -2740,19 +2646,33 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + else if (pending & MISC_INT_WDOG) + do_IRQ(AR71XX_MISC_IRQ_WDOG); + ++ else if (pending & MISC_INT_TIMER2) ++ do_IRQ(AR71XX_MISC_IRQ_TIMER2); ++ ++ else if (pending & MISC_INT_TIMER3) ++ do_IRQ(AR71XX_MISC_IRQ_TIMER3); ++ ++ else if (pending & MISC_INT_TIMER4) ++ do_IRQ(AR71XX_MISC_IRQ_TIMER4); ++ ++ else if (pending & MISC_INT_DDR_PERF) ++ do_IRQ(AR71XX_MISC_IRQ_DDR_PERF); ++ ++ else if (pending & MISC_INT_ENET_LINK) ++ do_IRQ(AR71XX_MISC_IRQ_ENET_LINK); ++ + else + spurious_interrupt(); +} + +static void ar71xx_misc_irq_unmask(struct irq_data *d) +{ ++ unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE; + void __iomem *base = ar71xx_reset_base; + u32 t; + -+ d->irq -= AR71XX_MISC_IRQ_BASE; -+ + t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); -+ __raw_writel(t | (1 << d->irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE); ++ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); @@ -2760,25 +2680,23 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + +static void ar71xx_misc_irq_mask(struct irq_data *d) +{ ++ unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE; + void __iomem *base = ar71xx_reset_base; + u32 t; + -+ d->irq -= AR71XX_MISC_IRQ_BASE; -+ + t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); -+ __raw_writel(t & ~(1 << d->irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE); ++ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE); + + /* flush write */ + (void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE); +} + -+static void ar724x_misc_irq_ack(unsigned int irq) ++static void ar724x_misc_irq_ack(struct irq_data *d) +{ ++ unsigned int irq = d->irq - AR71XX_MISC_IRQ_BASE; + void __iomem *base = ar71xx_reset_base; + u32 t; + -+ irq -= AR71XX_MISC_IRQ_BASE; -+ + t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS); + __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_STATUS); + @@ -2788,8 +2706,8 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + +static struct irq_chip ar71xx_misc_irq_chip = { + .name = "AR71XX MISC", -+ .irq_unmask = ar71xx_misc_irq_unmask, -+ .irq_mask = ar71xx_misc_irq_mask, ++ .irq_unmask = ar71xx_misc_irq_unmask, ++ .irq_mask = ar71xx_misc_irq_mask, +}; + +static struct irqaction ar71xx_misc_irqaction = { @@ -2809,6 +2727,11 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: + ar71xx_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; + break; + default: @@ -2817,14 +2740,82 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + } + + for (i = AR71XX_MISC_IRQ_BASE; -+ i < AR71XX_MISC_IRQ_BASE + AR71XX_MISC_IRQ_COUNT; i++) { ++ i < AR71XX_MISC_IRQ_BASE + AR71XX_MISC_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &ar71xx_misc_irq_chip, + handle_level_irq); -+ } + + setup_irq(AR71XX_CPU_IRQ_MISC, &ar71xx_misc_irqaction); +} + ++/* ++ * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for ++ * these devices typically allocate coherent DMA memory, however the ++ * DMA controller may still have some unsynchronized data in the FIFO. ++ * Issue a flush in the handlers to ensure that the driver sees ++ * the update. ++ */ ++static void ar71xx_ip2_handler(void) ++{ ++ ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_PCI); ++ do_IRQ(AR71XX_CPU_IRQ_IP2); ++} ++ ++static void ar724x_ip2_handler(void) ++{ ++ ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_PCIE); ++ do_IRQ(AR71XX_CPU_IRQ_IP2); ++} ++ ++static void ar913x_ip2_handler(void) ++{ ++ ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_WMAC); ++ do_IRQ(AR71XX_CPU_IRQ_IP2); ++} ++ ++static void ar933x_ip2_handler(void) ++{ ++ ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_WMAC); ++ do_IRQ(AR71XX_CPU_IRQ_IP2); ++} ++ ++static void ar934x_ip2_handler(void) ++{ ++ ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_PCIE); ++ do_IRQ(AR71XX_CPU_IRQ_IP2); ++} ++ ++static void ar71xx_ip3_handler(void) ++{ ++ ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_USB); ++ do_IRQ(AR71XX_CPU_IRQ_USB); ++} ++ ++static void ar724x_ip3_handler(void) ++{ ++ ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_USB); ++ do_IRQ(AR71XX_CPU_IRQ_USB); ++} ++ ++static void ar913x_ip3_handler(void) ++{ ++ ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_USB); ++ do_IRQ(AR71XX_CPU_IRQ_USB); ++} ++ ++static void ar933x_ip3_handler(void) ++{ ++ ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_USB); ++ do_IRQ(AR71XX_CPU_IRQ_USB); ++} ++ ++static void ar934x_ip3_handler(void) ++{ ++ do_IRQ(AR71XX_CPU_IRQ_USB); ++} ++ ++static void (*ip2_handler)(void); ++static void (*ip3_handler)(void); ++ +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; @@ -2834,17 +2825,8 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + if (pending & STATUSF_IP7) + do_IRQ(AR71XX_CPU_IRQ_TIMER); + -+ else if (pending & STATUSF_IP2) { -+ /* -+ * This IRQ is meant for a PCI device. Drivers for PCI devices -+ * typically allocate coherent DMA memory for the descriptor -+ * ring, however the DMA controller may still have some -+ * unsynchronized data in the FIFO. -+ * Issue a flush here to ensure that the driver sees the update. -+ */ -+ ar71xx_ddr_flush(ip2_flush_reg); -+ do_IRQ(AR71XX_CPU_IRQ_IP2); -+ } ++ else if (pending & STATUSF_IP2) ++ ip2_handler(); + + else if (pending & STATUSF_IP4) + do_IRQ(AR71XX_CPU_IRQ_GE0); @@ -2853,31 +2835,54 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + do_IRQ(AR71XX_CPU_IRQ_GE1); + + else if (pending & STATUSF_IP3) -+ do_IRQ(AR71XX_CPU_IRQ_USB); ++ ip3_handler(); + + else if (pending & STATUSF_IP6) + ar71xx_misc_irq_dispatch(); + -+ else -+ spurious_interrupt(); ++ spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ -+ switch(ar71xx_soc) { ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ ip2_handler = ar71xx_ip2_handler; ++ ip3_handler = ar71xx_ip3_handler; ++ break; ++ + case AR71XX_SOC_AR7240: + case AR71XX_SOC_AR7241: + case AR71XX_SOC_AR7242: -+ ip2_flush_reg = AR724X_DDR_REG_FLUSH_PCIE; ++ ip2_handler = ar724x_ip2_handler; ++ ip3_handler = ar724x_ip3_handler; + break; ++ + case AR71XX_SOC_AR9130: + case AR71XX_SOC_AR9132: -+ ip2_flush_reg = AR91XX_DDR_REG_FLUSH_WMAC; ++ ip2_handler = ar913x_ip2_handler; ++ ip3_handler = ar913x_ip3_handler; + break; -+ default: -+ ip2_flush_reg = AR71XX_DDR_REG_FLUSH_PCI; ++ ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ ip2_handler = ar933x_ip2_handler; ++ ip3_handler = ar933x_ip3_handler; ++ break; ++ ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ ip2_handler = ar934x_ip2_handler; ++ ip3_handler = ar934x_ip3_handler; + break; ++ ++ default: ++ BUG(); + } ++ + mips_cpu_irq_init(); + + ar71xx_misc_irq_init(); @@ -2886,429 +2891,688 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + + ar71xx_gpio_irq_init(); +} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap81.c linux-2.6.39/arch/mips/ar71xx/mach-ap81.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap81.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-ap81.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,140 @@ -+/* -+ * Atheros AP81 board support -+ * -+ * Copyright (C) 2009 Gabor Juhos -+ * Copyright (C) 2009 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Kconfig linux-2.6.39/arch/mips/ar71xx/Kconfig +--- linux-2.6.39.orig/arch/mips/ar71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/Kconfig 2011-08-24 04:20:27.209240389 +0200 +@@ -0,0 +1,420 @@ ++if ATHEROS_AR71XX + -+#include ++menu "Atheros AR71xx machine selection" + -+#include "machtype.h" -+#include "devices.h" -+#include "dev-m25p80.h" -+#include "dev-ar913x-wmac.h" -+#include "dev-gpio-buttons.h" -+#include "dev-leds-gpio.h" -+#include "dev-usb.h" ++config AR71XX_MACH_AP81 ++ bool "Atheros AP81 board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+#define AP81_GPIO_LED_STATUS 1 -+#define AP81_GPIO_LED_AOSS 3 -+#define AP81_GPIO_LED_WLAN 6 -+#define AP81_GPIO_LED_POWER 14 ++config AR71XX_MACH_AP83 ++ bool "Atheros AP83 board support" ++ select SOC_AR913X ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+#define AP81_GPIO_BTN_SW4 12 -+#define AP81_GPIO_BTN_SW1 21 ++config AR71XX_MACH_AP96 ++ bool "Atheros AP96 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP94_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+#define AP81_BUTTONS_POLL_INTERVAL 20 ++config AR71XX_MACH_AP121 ++ bool "Atheros AP121 board support" ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ select AR71XX_DEV_AR9XXX_WMAC ++ select SOC_AR933X ++ default n + -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition ap81_partitions[] = { -+ { -+ .name = "u-boot", -+ .offset = 0, -+ .size = 0x040000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "u-boot-env", -+ .offset = 0x040000, -+ .size = 0x010000, -+ } , { -+ .name = "rootfs", -+ .offset = 0x050000, -+ .size = 0x500000, -+ } , { -+ .name = "uImage", -+ .offset = 0x550000, -+ .size = 0x100000, -+ } , { -+ .name = "ART", -+ .offset = 0x650000, -+ .size = 0x1b0000, -+ .mask_flags = MTD_WRITEABLE, -+ } -+}; -+#endif /* CONFIG_MTD_PARTITIONS */ ++config AR71XX_MACH_DB120 ++ bool "Atheros DB120 board support" ++ select SOC_AR934X ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_DB120_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+static struct flash_platform_data ap81_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .parts = ap81_partitions, -+ .nr_parts = ARRAY_SIZE(ap81_partitions), -+#endif -+}; ++config AR71XX_MACH_DIR_600_A1 ++ bool "D-Link DIR-600 rev. A1 support" ++ select SOC_AR724X ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_NVRAM ++ default n + -+static struct gpio_led ap81_leds_gpio[] __initdata = { -+ { -+ .name = "ap81:green:status", -+ .gpio = AP81_GPIO_LED_STATUS, -+ .active_low = 1, -+ }, { -+ .name = "ap81:amber:aoss", -+ .gpio = AP81_GPIO_LED_AOSS, -+ .active_low = 1, -+ }, { -+ .name = "ap81:green:wlan", -+ .gpio = AP81_GPIO_LED_WLAN, -+ .active_low = 1, -+ }, { -+ .name = "ap81:green:power", -+ .gpio = AP81_GPIO_LED_POWER, -+ .active_low = 1, -+ } -+}; ++config AR71XX_MACH_DIR_615_C1 ++ bool "D-Link DIR-615 rev. C1 support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_NVRAM ++ default n + -+static struct gpio_button ap81_gpio_buttons[] __initdata = { -+ { -+ .desc = "sw1", -+ .type = EV_KEY, -+ .code = BTN_0, -+ .threshold = 3, -+ .gpio = AP81_GPIO_BTN_SW1, -+ .active_low = 1, -+ } , { -+ .desc = "sw4", -+ .type = EV_KEY, -+ .code = BTN_1, -+ .threshold = 3, -+ .gpio = AP81_GPIO_BTN_SW4, -+ .active_low = 1, -+ } -+}; ++config AR71XX_MACH_DIR_825_B1 ++ bool "D-Link DIR-825 rev. B1 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP94_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+static void __init ap81_setup(void) -+{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++config AR71XX_MACH_JA76PF ++ bool "jjPlus JA76PF board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+ ar71xx_set_mac_base(eeprom); -+ ar71xx_add_device_mdio(0x0); ++config AR71XX_MACH_JWAP003 ++ bool "jjPlus JWAP003 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_USB ++ default n + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.speed = SPEED_100; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ ar71xx_eth0_data.has_ar8216 = 1; ++config AR71XX_MACH_PB42 ++ bool "Atheros PB42 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ default n + -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = 0x10; ++config AR71XX_MACH_PB44 ++ bool "Atheros PB44 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+ ar71xx_add_device_eth(0); -+ ar71xx_add_device_eth(1); ++config AR71XX_MACH_PB92 ++ bool "Atheros PB92 board support" ++ select SOC_AR724X ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB9X_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+ ar71xx_add_device_usb(); ++config AR71XX_MACH_AW_NR580 ++ bool "AzureWave AW-NR580 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ default n + -+ ar71xx_add_device_m25p80(&ap81_flash_data); ++config AR71XX_MACH_WZR_HP_AG300H ++ bool "Buffalo WZR-HP-AG300H board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio), -+ ap81_leds_gpio); ++config AR71XX_MACH_WZR_HP_G300NH ++ bool "Buffalo WZR-HP-G300NH board support" ++ select SOC_AR913X ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ select RTL8366_SMI ++ default n + -+ ar71xx_add_device_gpio_buttons(-1, AP81_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(ap81_gpio_buttons), -+ ap81_gpio_buttons); ++config AR71XX_MACH_WP543 ++ bool "Compex WP543/WPJ543 board support" ++ select SOC_AR71XX ++ select MYLOADER ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n + -+ ar913x_add_device_wmac(eeprom, NULL); -+} ++config AR71XX_MACH_WRT160NL ++ bool "Linksys WRT160NL board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ select AR71XX_NVRAM ++ default n + -+MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap83.c linux-2.6.39/arch/mips/ar71xx/mach-ap83.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap83.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-ap83.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,266 @@ ++config AR71XX_MACH_WRT400N ++ bool "Linksys WRT400N board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_AP94_PCI if PCI ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_RB4XX ++ bool "MikroTik RouterBOARD 4xx series support" ++ select SOC_AR71XX ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_RB750 ++ bool "MikroTik RouterBOARD 750 support" ++ select SOC_AR724X ++ default n ++ ++config AR71XX_MACH_WNDR3700 ++ bool "NETGEAR WNDR3700 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP94_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_WNR2000 ++ bool "NETGEAR WNR2000 board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_MZK_W04NU ++ bool "Planex MZK-W04NU board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_MZK_W300NH ++ bool "Planex MZK-W300NH board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_NBG460N ++ bool "Zyxel NBG460N/550N/550NH board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_MR3X20 ++ bool "TP-LINK TL-MR3220/3420 support" ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_TL_WA901ND ++ bool "TP-LINK TL-WA901ND support" ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WA901ND_V2 ++ bool "TP-LINK TL-WA901ND v2 support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WR741ND ++ bool "TP-LINK TL-WR741ND support" ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WR841N_V1 ++ bool "TP-LINK TL-WR841N v1 support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_DSA ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WR941ND ++ bool "TP-LINK TL-WR941ND support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_DSA ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WR1043ND ++ bool "TP-LINK TL-WR1043ND support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_TEW_632BRP ++ bool "TRENDnet TEW-632BRP support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_NVRAM ++ default n ++ ++config AR71XX_MACH_UBNT ++ bool "Ubiquiti AR71xx based boards support" ++ select SOC_AR71XX ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_EAP7660D ++ bool "Senao EAP7660D support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_ZCN_1523H ++ bool "Zcomax ZCN-1523H support" ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++endmenu ++ ++config SOC_AR71XX ++ bool ++ select USB_ARCH_HAS_EHCI ++ select USB_ARCH_HAS_OHCI ++ ++config SOC_AR724X ++ bool ++ select USB_ARCH_HAS_EHCI ++ select USB_ARCH_HAS_OHCI ++ ++config SOC_AR913X ++ bool ++ select USB_ARCH_HAS_EHCI ++ ++config SOC_AR934X ++ bool ++ select USB_ARCH_HAS_EHCI ++ ++config AR71XX_DEV_M25P80 ++ def_bool n ++ ++config AR71XX_DEV_AP91_PCI ++ select AR71XX_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config AR71XX_DEV_AP94_PCI ++ select AR71XX_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config AR71XX_DEV_AR9XXX_WMAC ++ def_bool n ++ ++config AR71XX_DEV_DB120_PCI ++ select AR71XX_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config AR71XX_DEV_DSA ++ def_bool n ++ ++config AR71XX_DEV_GPIO_BUTTONS ++ def_bool n ++ ++config AR71XX_DEV_LEDS_GPIO ++ def_bool n ++ ++config AR71XX_DEV_PB42_PCI ++ def_bool n ++ ++config AR71XX_DEV_PB9X_PCI ++ def_bool n ++ ++config AR71XX_DEV_USB ++ def_bool n ++ ++config AR71XX_NVRAM ++ def_bool n ++ ++config AR71XX_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config SOC_AR933X ++ bool ++ select USB_ARCH_HAS_EHCI ++ ++endif +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap121.c linux-2.6.39/arch/mips/ar71xx/mach-ap121.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap121.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ap121.c 2011-08-24 02:41:55.477989660 +0200 +@@ -0,0 +1,245 @@ +/* -+ * Atheros AP83 board support ++ * Atheros AP121 board support + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2011 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include +#include +#include -+#include -+#include -+#include -+ -+#include -+#include ++#include + +#include "machtype.h" +#include "devices.h" -+#include "dev-ar913x-wmac.h" ++#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" ++#include "dev-m25p80.h" +#include "dev-usb.h" + -+#define AP83_GPIO_LED_WLAN 6 -+#define AP83_GPIO_LED_POWER 14 -+#define AP83_GPIO_LED_JUMPSTART 15 -+#define AP83_GPIO_BTN_JUMPSTART 12 -+#define AP83_GPIO_BTN_RESET 21 ++#define AP121_GPIO_LED_WLAN 0 ++#define AP121_GPIO_LED_USB 1 + -+#define AP83_050_GPIO_VSC7385_CS 1 -+#define AP83_050_GPIO_VSC7385_MISO 3 -+#define AP83_050_GPIO_VSC7385_MOSI 16 -+#define AP83_050_GPIO_VSC7385_SCK 17 ++#define AP121_GPIO_BTN_JUMPSTART 11 ++#define AP121_GPIO_BTN_RESET 12 ++ ++#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) ++ ++#define AP121_MAC0_OFFSET 0x0000 ++#define AP121_MAC1_OFFSET 0x0006 ++#define AP121_CALDATA_OFFSET 0x1000 ++#define AP121_WMAC_MAC_OFFSET 0x1002 + -+#define AP83_BUTTONS_POLL_INTERVAL 20 ++#define AP121_MINI_GPIO_LED_WLAN 0 ++#define AP121_MINI_GPIO_BTN_JUMPSTART 12 ++#define AP121_MINI_GPIO_BTN_RESET 11 + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition ap83_flash_partitions[] = { ++static struct mtd_partition ap121_parts[] = { + { + .name = "u-boot", + .offset = 0, -+ .size = 0x040000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "u-boot-env", -+ .offset = 0x040000, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "kernel", -+ .offset = 0x060000, -+ .size = 0x140000, -+ } , { -+ .name = "rootfs", -+ .offset = 0x1a0000, -+ .size = 0x650000, -+ } , { -+ .name = "art", -+ .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "firmware", -+ .offset = 0x060000, -+ .size = 0x790000, -+ } -+}; -+#endif /* CONFIG_MTD_PARTITIONS */ -+ -+static struct ar91xx_flash_platform_data ap83_flash_data = { -+ .width = 2, -+#ifdef CONFIG_MTD_PARTITIONS -+ .parts = ap83_flash_partitions, -+ .nr_parts = ARRAY_SIZE(ap83_flash_partitions), -+#endif ++ }, ++ { ++ .name = "rootfs", ++ .offset = 0x010000, ++ .size = 0x130000, ++ }, ++ { ++ .name = "uImage", ++ .offset = 0x140000, ++ .size = 0x0a0000, ++ }, ++ { ++ .name = "NVRAM", ++ .offset = 0x1e0000, ++ .size = 0x010000, ++ }, ++ { ++ .name = "ART", ++ .offset = 0x1f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, +}; ++#define ap121_nr_parts ARRAY_SIZE(ap121_parts) + -+static struct resource ap83_flash_resources[] = { -+ [0] = { -+ .start = AR71XX_SPI_BASE, -+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, -+ .flags = IORESOURCE_MEM, ++static struct mtd_partition ap121_mini_parts[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "rootfs", ++ .offset = 0x050000, ++ .size = 0x2b0000, ++ }, ++ { ++ .name = "uImage", ++ .offset = 0x300000, ++ .size = 0x0e0000, ++ }, ++ { ++ .name = "NVRAM", ++ .offset = 0x3e0000, ++ .size = 0x010000, ++ }, ++ { ++ .name = "ART", ++ .offset = 0x3f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, + }, +}; + -+static struct platform_device ap83_flash_device = { -+ .name = "ar91xx-flash", -+ .id = -1, -+ .resource = ap83_flash_resources, -+ .num_resources = ARRAY_SIZE(ap83_flash_resources), -+ .dev = { -+ .platform_data = &ap83_flash_data, -+ } ++#define ap121_mini_nr_parts ARRAY_SIZE(ap121_parts) ++ ++#else ++#define ap121_parts NULL ++#define ap121_nr_parts 0 ++#define ap121_mini_parts NULL ++#define ap121_mini_nr_parts 0 ++#endif /* CONFIG_MTD_PARTITIONS */ ++ ++static struct flash_platform_data ap121_flash_data = { ++ .parts = ap121_parts, ++ .nr_parts = ap121_nr_parts, +}; + -+static struct gpio_led ap83_leds_gpio[] __initdata = { ++static struct gpio_led ap121_leds_gpio[] __initdata = { + { -+ .name = "ap83:green:jumpstart", -+ .gpio = AP83_GPIO_LED_JUMPSTART, -+ .active_low = 0, -+ }, { -+ .name = "ap83:green:power", -+ .gpio = AP83_GPIO_LED_POWER, ++ .name = "ap121:green:usb", ++ .gpio = AP121_GPIO_LED_USB, + .active_low = 0, -+ }, { -+ .name = "ap83:green:wlan", -+ .gpio = AP83_GPIO_LED_WLAN, ++ }, ++ { ++ .name = "ap121:green:wlan", ++ .gpio = AP121_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + -+static struct gpio_button ap83_gpio_buttons[] __initdata = { ++static struct gpio_keys_button ap121_gpio_keys[] __initdata = { + { -+ .desc = "soft_reset", ++ .desc = "jumpstart button", + .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = AP83_GPIO_BTN_RESET, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_GPIO_BTN_JUMPSTART, + .active_low = 1, -+ } , { -+ .desc = "jumpstart", ++ }, ++ { ++ .desc = "reset button", + .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = AP83_GPIO_BTN_JUMPSTART, ++ .code = KEY_RESTART, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_GPIO_BTN_RESET, + .active_low = 1, + } +}; + -+static struct resource ap83_040_spi_resources[] = { -+ [0] = { -+ .start = AR71XX_SPI_BASE, -+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, -+ .flags = IORESOURCE_MEM, ++static struct gpio_led ap121_mini_leds_gpio[] __initdata = { ++ { ++ .name = "ap121:green:wlan", ++ .gpio = AP121_MINI_GPIO_LED_WLAN, ++ .active_low = 0, + }, +}; + -+static struct platform_device ap83_040_spi_device = { -+ .name = "ap83-spi", -+ .id = 0, -+ .resource = ap83_040_spi_resources, -+ .num_resources = ARRAY_SIZE(ap83_040_spi_resources), -+}; -+ -+static struct spi_gpio_platform_data ap83_050_spi_data = { -+ .miso = AP83_050_GPIO_VSC7385_MISO, -+ .mosi = AP83_050_GPIO_VSC7385_MOSI, -+ .sck = AP83_050_GPIO_VSC7385_SCK, -+ .num_chipselect = 1, -+}; -+ -+static struct platform_device ap83_050_spi_device = { -+ .name = "spi_gpio", -+ .id = 0, -+ .dev = { -+ .platform_data = &ap83_050_spi_data, -+ } -+}; -+ -+static void ap83_vsc7385_reset(void) -+{ -+ ar71xx_device_stop(RESET_MODULE_GE1_PHY); -+ udelay(10); -+ ar71xx_device_start(RESET_MODULE_GE1_PHY); -+ mdelay(50); -+} -+ -+static struct vsc7385_platform_data ap83_vsc7385_data = { -+ .reset = ap83_vsc7385_reset, -+ .ucode_name = "vsc7385_ucode_ap83.bin", -+ .mac_cfg = { -+ .tx_ipg = 6, -+ .bit2 = 0, -+ .clk_sel = 3, ++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = { ++ { ++ .desc = "jumpstart button", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART, ++ .active_low = 1, + }, -+}; -+ -+static struct spi_board_info ap83_spi_info[] = { + { -+ .bus_num = 0, -+ .chip_select = 0, -+ .max_speed_hz = 25000000, -+ .modalias = "spi-vsc7385", -+ .platform_data = &ap83_vsc7385_data, -+ .controller_data = (void *) AP83_050_GPIO_VSC7385_CS, ++ .desc = "reset button", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP121_MINI_GPIO_BTN_RESET, ++ .active_low = 1, + } +}; + -+static void __init ap83_generic_setup(void) ++static void __init ap121_common_setup(void) +{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ar71xx_set_mac_base(eeprom); ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + -+ ar71xx_add_device_mdio(0xfffffffe); ++ ar71xx_add_device_m25p80(&ap121_flash_data); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth0_data.phy_mask = 0x1; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0); + -+ ar71xx_add_device_eth(0); ++ /* WAN port */ ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.phy_mask = BIT(4); + -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ /* LAN ports */ ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ar71xx_eth1_data.has_ar7240_switch = 1; + -+ ar71xx_eth1_pll_data.pll_1000 = 0x1f000000; -+ ++ ar71xx_add_device_mdio(0x0); + ar71xx_add_device_eth(1); ++ ar71xx_add_device_eth(0); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio), -+ ap83_leds_gpio); -+ -+ ar71xx_add_device_gpio_buttons(-1, AP83_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(ap83_gpio_buttons), -+ ap83_gpio_buttons); -+ -+ ar71xx_add_device_usb(); -+ -+ ar913x_add_device_wmac(eeprom, NULL); -+ -+ platform_device_register(&ap83_flash_device); -+ -+ spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info)); ++ ar9xxx_add_device_wmac(art + AP121_CALDATA_OFFSET, ++ art + AP121_WMAC_MAC_OFFSET); +} + -+static void __init ap83_040_setup(void) ++static void __init ap121_setup(void) +{ -+ ap83_flash_data.is_shared=1; -+ ap83_generic_setup(); -+ platform_device_register(&ap83_040_spi_device); -+} ++ ap121_flash_data.parts = ap121_parts; ++ ap121_flash_data.nr_parts = ap121_nr_parts; + -+static void __init ap83_050_setup(void) -+{ -+ ap83_generic_setup(); -+ platform_device_register(&ap83_050_spi_device); ++ ap121_common_setup(); ++ ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), ++ ap121_leds_gpio); ++ ar71xx_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap121_gpio_keys), ++ ap121_gpio_keys); ++ ++ ar71xx_add_device_usb(); +} + -+static void __init ap83_setup(void) ++static void __init ap121_mini_setup(void) +{ -+ u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244); -+ unsigned int board_version; ++ ap121_flash_data.parts = ap121_mini_parts; ++ ap121_flash_data.nr_parts = ap121_mini_nr_parts; + -+ board_version = (unsigned int)(board_id[0] - '0'); -+ board_version += ((unsigned int)(board_id[1] - '0')) * 10; ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio), ++ ap121_mini_leds_gpio); ++ ar71xx_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap121_mini_gpio_keys), ++ ap121_mini_gpio_keys); + -+ switch (board_version) { -+ case 40: -+ ap83_040_setup(); -+ break; -+ case 50: -+ ap83_050_setup(); -+ break; -+ default: -+ printk(KERN_WARNING "AP83-%03u board is not yet supported\n", -+ board_version); -+ } ++ ap121_common_setup(); +} + -+MIPS_MACHINE(AR71XX_MACH_AP83, "AP83", "Atheros AP83", ap83_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-aw-nr580.c linux-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-aw-nr580.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,101 @@ ++MIPS_MACHINE(AR71XX_MACH_AP121, "AP121", "Atheros AP121", ++ ap121_setup); ++ ++MIPS_MACHINE(AR71XX_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI", ++ ap121_mini_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap81.c linux-2.6.39/arch/mips/ar71xx/mach-ap81.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap81.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ap81.c 2011-08-24 02:41:55.477989660 +0200 +@@ -0,0 +1,142 @@ +/* -+ * AzureWave AW-NR580 board support ++ * Atheros AP81 board support + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2009 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -3318,616 +3582,703 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-aw-nr580.c linux-2.6.39/arch/m +#include +#include + -+#include +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" ++#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" -+#include "dev-pb42-pci.h" +#include "dev-leds-gpio.h" ++#include "dev-usb.h" + -+#define AW_NR580_GPIO_LED_READY_RED 0 -+#define AW_NR580_GPIO_LED_WLAN 1 -+#define AW_NR580_GPIO_LED_READY_GREEN 2 -+#define AW_NR580_GPIO_LED_WPS_GREEN 4 -+#define AW_NR580_GPIO_LED_WPS_AMBER 5 ++#define AP81_GPIO_LED_STATUS 1 ++#define AP81_GPIO_LED_AOSS 3 ++#define AP81_GPIO_LED_WLAN 6 ++#define AP81_GPIO_LED_POWER 14 + -+#define AW_NR580_GPIO_BTN_WPS 3 -+#define AW_NR580_GPIO_BTN_RESET 11 ++#define AP81_GPIO_BTN_SW4 12 ++#define AP81_GPIO_BTN_SW1 21 + -+#define AW_NR580_BUTTONS_POLL_INTERVAL 20 ++#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL) + -+static struct gpio_led aw_nr580_leds_gpio[] __initdata = { ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition ap81_partitions[] = { + { -+ .name = "aw-nr580:red:ready", -+ .gpio = AW_NR580_GPIO_LED_READY_RED, -+ .active_low = 0, -+ }, { -+ .name = "aw-nr580:green:ready", -+ .gpio = AW_NR580_GPIO_LED_READY_GREEN, -+ .active_low = 0, ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, + }, { -+ .name = "aw-nr580:green:wps", -+ .gpio = AW_NR580_GPIO_LED_WPS_GREEN, -+ .active_low = 0, ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, + }, { -+ .name = "aw-nr580:amber:wps", -+ .gpio = AW_NR580_GPIO_LED_WPS_AMBER, -+ .active_low = 0, ++ .name = "rootfs", ++ .offset = 0x050000, ++ .size = 0x500000, + }, { -+ .name = "aw-nr580:green:wlan", -+ .gpio = AW_NR580_GPIO_LED_WLAN, -+ .active_low = 0, ++ .name = "uImage", ++ .offset = 0x550000, ++ .size = 0x100000, ++ }, { ++ .name = "ART", ++ .offset = 0x650000, ++ .size = 0x1b0000, ++ .mask_flags = MTD_WRITEABLE, + } +}; ++#endif /* CONFIG_MTD_PARTITIONS */ ++ ++static struct flash_platform_data ap81_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = ap81_partitions, ++ .nr_parts = ARRAY_SIZE(ap81_partitions), ++#endif ++}; + -+static struct gpio_button aw_nr580_gpio_buttons[] __initdata = { ++static struct gpio_led ap81_leds_gpio[] __initdata = { + { -+ .desc = "reset", ++ .name = "ap81:green:status", ++ .gpio = AP81_GPIO_LED_STATUS, ++ .active_low = 1, ++ }, { ++ .name = "ap81:amber:aoss", ++ .gpio = AP81_GPIO_LED_AOSS, ++ .active_low = 1, ++ }, { ++ .name = "ap81:green:wlan", ++ .gpio = AP81_GPIO_LED_WLAN, ++ .active_low = 1, ++ }, { ++ .name = "ap81:green:power", ++ .gpio = AP81_GPIO_LED_POWER, ++ .active_low = 1, ++ } ++}; ++ ++static struct gpio_keys_button ap81_gpio_keys[] __initdata = { ++ { ++ .desc = "sw1", + .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = AW_NR580_GPIO_BTN_RESET, ++ .code = BTN_0, ++ .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP81_GPIO_BTN_SW1, + .active_low = 1, + }, { -+ .desc = "wps", ++ .desc = "sw4", + .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = AW_NR580_GPIO_BTN_WPS, ++ .code = BTN_1, ++ .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP81_GPIO_BTN_SW4, + .active_low = 1, + } +}; + -+static void __init aw_nr580_setup(void) ++static void __init ap81_setup(void) +{ ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ + ar71xx_add_device_mdio(0x0); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.has_ar8216 = 1; ++ ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.phy_mask = 0x10; + + ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+ pb42_pci_init(); ++ ar71xx_add_device_usb(); + -+ ar71xx_add_device_m25p80(NULL); ++ ar71xx_add_device_m25p80(&ap81_flash_data); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio), -+ aw_nr580_leds_gpio); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio), ++ ap81_leds_gpio); + -+ ar71xx_add_device_gpio_buttons(-1, AW_NR580_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(aw_nr580_gpio_buttons), -+ aw_nr580_gpio_buttons); ++ ar71xx_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap81_gpio_keys), ++ ap81_gpio_keys); ++ ++ ar9xxx_add_device_wmac(eeprom, NULL); +} + -+MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580", -+ aw_nr580_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-600-a1.c linux-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-600-a1.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,138 @@ ++MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap83.c linux-2.6.39/arch/mips/ar71xx/mach-ap83.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap83.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ap83.c 2011-08-24 02:41:55.477989660 +0200 +@@ -0,0 +1,267 @@ +/* -+ * D-Link DIR-600 rev. A1 board support ++ * Atheros AP83 board support + * -+ * Copyright (C) 2010 Gabor Juhos ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + ++#include ++#include +#include +#include ++#include ++#include ++#include + +#include ++#include + +#include "machtype.h" +#include "devices.h" -+#include "dev-m25p80.h" -+#include "dev-ap91-eth.h" -+#include "dev-ap91-pci.h" ++#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" -+#include "nvram.h" -+ -+#define DIR_600_A1_GPIO_LED_WPS 0 -+#define DIR_600_A1_GPIO_LED_POWER_AMBER 1 -+#define DIR_600_A1_GPIO_LED_POWER_GREEN 6 ++#include "dev-usb.h" + -+#define DIR_600_A1_GPIO_BTN_RESET 8 -+#define DIR_600_A1_GPIO_BTN_WPS 12 ++#define AP83_GPIO_LED_WLAN 6 ++#define AP83_GPIO_LED_POWER 14 ++#define AP83_GPIO_LED_JUMPSTART 15 ++#define AP83_GPIO_BTN_JUMPSTART 12 ++#define AP83_GPIO_BTN_RESET 21 + -+#define DIR_600_A1_BUTTONS_POLL_INTERVAL 20 ++#define AP83_050_GPIO_VSC7385_CS 1 ++#define AP83_050_GPIO_VSC7385_MISO 3 ++#define AP83_050_GPIO_VSC7385_MOSI 16 ++#define AP83_050_GPIO_VSC7385_SCK 17 + -+#define DIR_600_A1_NVRAM_ADDR 0x1f030000 -+#define DIR_600_A1_NVRAM_SIZE 0x10000 ++#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition dir_600_a1_partitions[] = { ++static struct mtd_partition ap83_flash_partitions[] = { + { + .name = "u-boot", + .offset = 0, -+ .size = 0x030000, ++ .size = 0x040000, + .mask_flags = MTD_WRITEABLE, + }, { -+ .name = "nvram", -+ .offset = 0x030000, -+ .size = 0x010000, ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", -+ .offset = 0x040000, -+ .size = 0x0e0000, ++ .offset = 0x060000, ++ .size = 0x140000, + }, { + .name = "rootfs", -+ .offset = 0x120000, -+ .size = 0x2c0000, -+ }, { -+ .name = "mac", -+ .offset = 0x3e0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, ++ .offset = 0x1a0000, ++ .size = 0x650000, + }, { + .name = "art", -+ .offset = 0x3f0000, ++ .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", -+ .offset = 0x040000, -+ .size = 0x3a0000, ++ .offset = 0x060000, ++ .size = 0x790000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data dir_600_a1_flash_data = { ++static struct ar91xx_flash_platform_data ap83_flash_data = { ++ .width = 2, +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = dir_600_a1_partitions, -+ .nr_parts = ARRAY_SIZE(dir_600_a1_partitions), ++ .parts = ap83_flash_partitions, ++ .nr_parts = ARRAY_SIZE(ap83_flash_partitions), +#endif +}; + -+static struct gpio_led dir_600_a1_leds_gpio[] __initdata = { ++static struct resource ap83_flash_resources[] = { ++ [0] = { ++ .start = AR71XX_SPI_BASE, ++ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static struct platform_device ap83_flash_device = { ++ .name = "ar91xx-flash", ++ .id = -1, ++ .resource = ap83_flash_resources, ++ .num_resources = ARRAY_SIZE(ap83_flash_resources), ++ .dev = { ++ .platform_data = &ap83_flash_data, ++ } ++}; ++ ++static struct gpio_led ap83_leds_gpio[] __initdata = { + { -+ .name = "dir-600-a1:green:power", -+ .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN, ++ .name = "ap83:green:jumpstart", ++ .gpio = AP83_GPIO_LED_JUMPSTART, ++ .active_low = 0, + }, { -+ .name = "dir-600-a1:amber:power", -+ .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER, ++ .name = "ap83:green:power", ++ .gpio = AP83_GPIO_LED_POWER, ++ .active_low = 0, + }, { -+ .name = "dir-600-a1:blue:wps", -+ .gpio = DIR_600_A1_GPIO_LED_WPS, -+ .active_low = 1, -+ } ++ .name = "ap83:green:wlan", ++ .gpio = AP83_GPIO_LED_WLAN, ++ .active_low = 0, ++ }, +}; + -+static struct gpio_button dir_600_a1_gpio_buttons[] __initdata = { ++static struct gpio_keys_button ap83_gpio_keys[] __initdata = { + { -+ .desc = "reset", ++ .desc = "soft_reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = DIR_600_A1_GPIO_BTN_RESET, ++ .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP83_GPIO_BTN_RESET, + .active_low = 1, + }, { -+ .desc = "wps", ++ .desc = "jumpstart", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = DIR_600_A1_GPIO_BTN_WPS, ++ .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP83_GPIO_BTN_JUMPSTART, + .active_low = 1, + } +}; + -+static void __init dir_600_a1_setup(void) -+{ -+ const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ u8 mac_buff[6]; -+ u8 *mac = NULL; -+ -+ if (nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE, -+ "lan_mac=", mac_buff) == 0) -+ mac = mac_buff; ++static struct resource ap83_040_spi_resources[] = { ++ [0] = { ++ .start = AR71XX_SPI_BASE, ++ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; + -+ ar71xx_add_device_m25p80(&dir_600_a1_flash_data); ++static struct platform_device ap83_040_spi_device = { ++ .name = "ap83-spi", ++ .id = 0, ++ .resource = ap83_040_spi_resources, ++ .num_resources = ARRAY_SIZE(ap83_040_spi_resources), ++}; + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio), -+ dir_600_a1_leds_gpio); ++static struct spi_gpio_platform_data ap83_050_spi_data = { ++ .miso = AP83_050_GPIO_VSC7385_MISO, ++ .mosi = AP83_050_GPIO_VSC7385_MOSI, ++ .sck = AP83_050_GPIO_VSC7385_SCK, ++ .num_chipselect = 1, ++}; + -+ ar71xx_add_device_gpio_buttons(-1, DIR_600_A1_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(dir_600_a1_gpio_buttons), -+ dir_600_a1_gpio_buttons); ++static struct platform_device ap83_050_spi_device = { ++ .name = "spi_gpio", ++ .id = 0, ++ .dev = { ++ .platform_data = &ap83_050_spi_data, ++ } ++}; + -+ ap91_eth_init(mac, NULL); -+ ap91_pci_init(ee, mac); ++static void ap83_vsc7385_reset(void) ++{ ++ ar71xx_device_stop(RESET_MODULE_GE1_PHY); ++ udelay(10); ++ ar71xx_device_start(RESET_MODULE_GE1_PHY); ++ mdelay(50); +} + -+MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1", -+ dir_600_a1_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-615-c1.c linux-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-615-c1.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,173 @@ -+/* -+ * D-Link DIR-615 rev C1 board support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published ++static struct vsc7385_platform_data ap83_vsc7385_data = { ++ .reset = ap83_vsc7385_reset, ++ .ucode_name = "vsc7385_ucode_ap83.bin", ++ .mac_cfg = { ++ .tx_ipg = 6, ++ .bit2 = 0, ++ .clk_sel = 3, ++ }, ++}; ++ ++static struct spi_board_info ap83_spi_info[] = { ++ { ++ .bus_num = 0, ++ .chip_select = 0, ++ .max_speed_hz = 25000000, ++ .modalias = "spi-vsc7385", ++ .platform_data = &ap83_vsc7385_data, ++ .controller_data = (void *) AP83_050_GPIO_VSC7385_CS, ++ } ++}; ++ ++static void __init ap83_generic_setup(void) ++{ ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ ++ ar71xx_add_device_mdio(0xfffffffe); ++ ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.phy_mask = 0x1; ++ ++ ar71xx_add_device_eth(0); ++ ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ++ ar71xx_eth1_pll_data.pll_1000 = 0x1f000000; ++ ++ ar71xx_add_device_eth(1); ++ ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio), ++ ap83_leds_gpio); ++ ++ ar71xx_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap83_gpio_keys), ++ ap83_gpio_keys); ++ ++ ar71xx_add_device_usb(); ++ ++ ar9xxx_add_device_wmac(eeprom, NULL); ++ ++ platform_device_register(&ap83_flash_device); ++ ++ spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info)); ++} ++ ++static void __init ap83_040_setup(void) ++{ ++ ap83_flash_data.is_shared = 1; ++ ap83_generic_setup(); ++ platform_device_register(&ap83_040_spi_device); ++} ++ ++static void __init ap83_050_setup(void) ++{ ++ ap83_generic_setup(); ++ platform_device_register(&ap83_050_spi_device); ++} ++ ++static void __init ap83_setup(void) ++{ ++ u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244); ++ unsigned int board_version; ++ ++ board_version = (unsigned int)(board_id[0] - '0'); ++ board_version += ((unsigned int)(board_id[1] - '0')) * 10; ++ ++ switch (board_version) { ++ case 40: ++ ap83_040_setup(); ++ break; ++ case 50: ++ ap83_050_setup(); ++ break; ++ default: ++ printk(KERN_WARNING "AP83-%03u board is not yet supported\n", ++ board_version); ++ } ++} ++ ++MIPS_MACHINE(AR71XX_MACH_AP83, "AP83", "Atheros AP83", ap83_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap96.c linux-2.6.39/arch/mips/ar71xx/mach-ap96.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap96.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ap96.c 2011-08-24 02:41:55.477989660 +0200 +@@ -0,0 +1,180 @@ ++/* ++ * Atheros AP96 board support ++ * ++ * Copyright (C) 2009 Marco Porsch ++ * Copyright (C) 2009-2010 Gabor Juhos ++ * Copyright (C) 2010 Atheros Communications ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + ++#include +#include +#include ++#include + +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-ar913x-wmac.h" ++#include "dev-ap94-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" -+#include "nvram.h" -+ -+#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */ -+#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */ -+#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */ -+#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */ -+#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */ -+#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */ -+#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */ ++#include "dev-usb.h" + -+/* buttons may need refinement */ ++#define AP96_GPIO_LED_12_GREEN 0 ++#define AP96_GPIO_LED_3_GREEN 1 ++#define AP96_GPIO_LED_2_GREEN 2 ++#define AP96_GPIO_LED_WPS_GREEN 4 ++#define AP96_GPIO_LED_5_GREEN 5 ++#define AP96_GPIO_LED_4_ORANGE 6 + -+#define DIR_615C1_GPIO_BTN_WPS 12 -+#define DIR_615C1_GPIO_BTN_RESET 21 ++/* Reset button - next to the power connector */ ++#define AP96_GPIO_BTN_RESET 3 ++/* WPS button - next to a led on right */ ++#define AP96_GPIO_BTN_WPS 8 + -+#define DIR_615C1_BUTTONS_POLL_INTERVAL 20 ++#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL) + -+#define DIR_615C1_CONFIG_ADDR 0x1f020000 -+#define DIR_615C1_CONFIG_SIZE 0x10000 ++#define AP96_WMAC0_MAC_OFFSET 0x120c ++#define AP96_WMAC1_MAC_OFFSET 0x520c ++#define AP96_CALDATA0_OFFSET 0x1000 ++#define AP96_CALDATA1_OFFSET 0x5000 + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition dir_615c1_partitions[] = { ++static struct mtd_partition ap96_partitions[] = { + { -+ .name = "u-boot", ++ .name = "uboot", + .offset = 0, -+ .size = 0x020000, ++ .size = 0x030000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "config", -+ .offset = 0x020000, -+ .size = 0x010000, -+ } , { -+ .name = "kernel", ++ }, { ++ .name = "env", + .offset = 0x030000, -+ .size = 0x0d0000, -+ } , { ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { + .name = "rootfs", -+ .offset = 0x100000, -+ .size = 0x2f0000, -+ } , { -+ .name = "art", -+ .offset = 0x3f0000, ++ .offset = 0x040000, ++ .size = 0x600000, ++ }, { ++ .name = "uImage", ++ .offset = 0x640000, ++ .size = 0x1b0000, ++ }, { ++ .name = "caldata", ++ .offset = 0x7f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "firmware", -+ .offset = 0x030000, -+ .size = 0x3c0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data dir_615c1_flash_data = { ++static struct flash_platform_data ap96_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = dir_615c1_partitions, -+ .nr_parts = ARRAY_SIZE(dir_615c1_partitions), ++ .parts = ap96_partitions, ++ .nr_parts = ARRAY_SIZE(ap96_partitions), +#endif +}; + -+static struct gpio_led dir_615c1_leds_gpio[] __initdata = { ++/* ++ * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12 ++ * below (from left to right on the board). Led 1 seems to be on whenever the ++ * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange; ++ * others are green. ++ * ++ * In addition, there is one led next to a button on the right side for WPS. ++ */ ++static struct gpio_led ap96_leds_gpio[] __initdata = { + { -+ .name = "dir-615c1:orange:status", -+ .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS, ++ .name = "ap96:green:led2", ++ .gpio = AP96_GPIO_LED_2_GREEN, + .active_low = 1, + }, { -+ .name = "dir-615c1:blue:wps", -+ .gpio = DIR_615C1_GPIO_LED_BLUE_WPS, ++ .name = "ap96:green:led3", ++ .gpio = AP96_GPIO_LED_3_GREEN, + .active_low = 1, + }, { -+ .name = "dir-615c1:green:wan", -+ .gpio = DIR_615C1_GPIO_LED_GREEN_WAN, ++ .name = "ap96:orange:led4", ++ .gpio = AP96_GPIO_LED_4_ORANGE, + .active_low = 1, + }, { -+ .name = "dir-615c1:green:wancpu", -+ .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU, -+ .active_low = 1, -+ }, { -+ .name = "dir-615c1:green:wlan", -+ .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN, ++ .name = "ap96:green:led5", ++ .gpio = AP96_GPIO_LED_5_GREEN, + .active_low = 1, -+ }, { -+ .name = "dir-615c1:green:status", -+ .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS, -+ .active_low = 1, + }, { -+ .name = "dir-615c1:orange:wan", -+ .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN, ++ .name = "ap96:green:led12", ++ .gpio = AP96_GPIO_LED_12_GREEN, ++ .active_low = 1, ++ }, { /* next to a button on right */ ++ .name = "ap96:green:wps", ++ .gpio = AP96_GPIO_LED_WPS_GREEN, + .active_low = 1, + } -+ +}; + -+static struct gpio_button dir_615c1_gpio_buttons[] __initdata = { ++static struct gpio_keys_button ap96_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = DIR_615C1_GPIO_BTN_RESET, ++ .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP96_GPIO_BTN_RESET, ++ .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = DIR_615C1_GPIO_BTN_WPS, ++ .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AP96_GPIO_BTN_WPS, ++ .active_low = 1, + } +}; + -+#define DIR_615C1_LAN_PHYMASK BIT(0) -+#define DIR_615C1_WAN_PHYMASK BIT(4) -+#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \ -+ DIR_615C1_WAN_PHYMASK)) ++#define AP96_WAN_PHYMASK 0x10 ++#define AP96_LAN_PHYMASK 0x0f + -+static void __init dir_615c1_setup(void) ++static void __init ap96_setup(void) +{ -+ const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR); -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); -+ u8 mac[6]; -+ u8 *wlan_mac = NULL; ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + -+ if (nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE, -+ "lan_mac=", mac) == 0) { -+ ar71xx_set_mac_base(mac); -+ wlan_mac = mac; -+ } ++ ar71xx_add_device_mdio(~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK)); + -+ ar71xx_add_device_mdio(DIR_615C1_MDIO_MASK); ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.phy_mask = AP96_LAN_PHYMASK; ++ ar71xx_eth0_data.speed = SPEED_1000; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK; ++ ar71xx_add_device_eth(0); + -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK; ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art, 1); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.phy_mask = AP96_WAN_PHYMASK; ++ ++ ar71xx_eth1_pll_data.pll_1000 = 0x1f000000; + -+ ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + -+ ar71xx_add_device_m25p80(&dir_615c1_flash_data); ++ ar71xx_add_device_usb(); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio), -+ dir_615c1_leds_gpio); ++ ar71xx_add_device_m25p80(&ap96_flash_data); + -+ ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(dir_615c1_gpio_buttons), -+ dir_615c1_gpio_buttons); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio), ++ ap96_leds_gpio); + -+ ar913x_add_device_wmac(eeprom, wlan_mac); ++ ar71xx_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ap96_gpio_keys), ++ ap96_gpio_keys); ++ ++ ap94_pci_init(art + AP96_CALDATA0_OFFSET, ++ art + AP96_WMAC0_MAC_OFFSET, ++ art + AP96_CALDATA1_OFFSET, ++ art + AP96_WMAC1_MAC_OFFSET); +} + -+MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1", -+ dir_615c1_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-825-b1.c linux-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-825-b1.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,192 @@ ++MIPS_MACHINE(AR71XX_MACH_AP96, "AP96", "Atheros AP96", ap96_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-aw-nr580.c linux-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-aw-nr580.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c 2011-08-24 02:41:55.487989871 +0200 +@@ -0,0 +1,102 @@ +/* -+ * D-Link DIR-825 rev. B1 board support -+ * -+ * Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o. ++ * AzureWave AW-NR580 board support + * -+ * based on mach-wndr3700.c ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include +#include +#include -+#include -+#include + ++#include +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-ap94-pci.h" +#include "dev-gpio-buttons.h" ++#include "dev-pb42-pci.h" +#include "dev-leds-gpio.h" -+#include "dev-usb.h" -+ -+#define DIR825B1_GPIO_LED_BLUE_USB 0 -+#define DIR825B1_GPIO_LED_ORANGE_POWER 1 -+#define DIR825B1_GPIO_LED_BLUE_POWER 2 -+#define DIR825B1_GPIO_LED_BLUE_POWERSAVE 4 -+#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 -+#define DIR825B1_GPIO_LED_BLUE_PLANET 11 -+ -+#define DIR825B1_GPIO_BTN_RESET 3 -+#define DIR825B1_GPIO_BTN_POWERSAVE 8 + -+#define DIR825B1_GPIO_RTL8366_SDA 5 -+#define DIR825B1_GPIO_RTL8366_SCK 7 -+ -+#define DIR825B1_BUTTONS_POLL_INTERVAL 20 ++#define AW_NR580_GPIO_LED_READY_RED 0 ++#define AW_NR580_GPIO_LED_WLAN 1 ++#define AW_NR580_GPIO_LED_READY_GREEN 2 ++#define AW_NR580_GPIO_LED_WPS_GREEN 4 ++#define AW_NR580_GPIO_LED_WPS_AMBER 5 + -+#define DIR825B1_CAL_LOCATION_0 0x1f661000 -+#define DIR825B1_CAL_LOCATION_1 0x1f665000 ++#define AW_NR580_GPIO_BTN_WPS 3 ++#define AW_NR580_GPIO_BTN_RESET 11 + -+#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8 -+#define DIR825B1_MAC_LOCATION_1 0x2ffa8370 ++#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL) + -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition dir825b1_partitions[] = { ++static struct gpio_led aw_nr580_leds_gpio[] __initdata = { + { -+ .name = "uboot", -+ .offset = 0, -+ .size = 0x040000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "config", -+ .offset = 0x040000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "firmware", -+ .offset = 0x050000, -+ .size = 0x610000, -+ } , { -+ .name = "caldata", -+ .offset = 0x660000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "unknown", -+ .offset = 0x670000, -+ .size = 0x190000, -+ .mask_flags = MTD_WRITEABLE, -+ } -+}; -+#endif /* CONFIG_MTD_PARTITIONS */ -+ -+static struct flash_platform_data dir825b1_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .parts = dir825b1_partitions, -+ .nr_parts = ARRAY_SIZE(dir825b1_partitions), -+#endif -+}; -+ -+static struct gpio_led dir825b1_leds_gpio[] __initdata = { -+ { -+ .name = "dir825b1:blue:usb", -+ .gpio = DIR825B1_GPIO_LED_BLUE_USB, -+ .active_low = 1, -+ }, { -+ .name = "dir825b1:orange:power", -+ .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, -+ .active_low = 1, ++ .name = "aw-nr580:red:ready", ++ .gpio = AW_NR580_GPIO_LED_READY_RED, ++ .active_low = 0, + }, { -+ .name = "dir825b1:blue:power", -+ .gpio = DIR825B1_GPIO_LED_BLUE_POWER, -+ .active_low = 1, ++ .name = "aw-nr580:green:ready", ++ .gpio = AW_NR580_GPIO_LED_READY_GREEN, ++ .active_low = 0, + }, { -+ .name = "dir825b1:blue:powersave", -+ .gpio = DIR825B1_GPIO_LED_BLUE_POWERSAVE, -+ .active_low = 1, ++ .name = "aw-nr580:green:wps", ++ .gpio = AW_NR580_GPIO_LED_WPS_GREEN, ++ .active_low = 0, + }, { -+ .name = "dir825b1:orange:planet", -+ .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, -+ .active_low = 1, ++ .name = "aw-nr580:amber:wps", ++ .gpio = AW_NR580_GPIO_LED_WPS_AMBER, ++ .active_low = 0, + }, { -+ .name = "dir825b1:blue:planet", -+ .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, -+ .active_low = 1, ++ .name = "aw-nr580:green:wlan", ++ .gpio = AW_NR580_GPIO_LED_WLAN, ++ .active_low = 0, + } +}; + -+static struct gpio_button dir825b1_gpio_buttons[] __initdata = { ++static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = DIR825B1_GPIO_BTN_RESET, ++ .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AW_NR580_GPIO_BTN_RESET, + .active_low = 1, -+ } , { -+ .desc = "powersave", ++ }, { ++ .desc = "wps", + .type = EV_KEY, -+ .code = BTN_1, -+ .threshold = 3, -+ .gpio = DIR825B1_GPIO_BTN_POWERSAVE, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = AW_NR580_GPIO_BTN_WPS, + .active_low = 1, + } +}; + -+static struct rtl8366s_platform_data dir825b1_rtl8366s_data = { -+ .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, -+ .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, -+}; -+ -+static struct platform_device dir825b1_rtl8366s_device = { -+ .name = RTL8366S_DRIVER_NAME, -+ .id = -1, -+ .dev = { -+ .platform_data = &dir825b1_rtl8366s_data, -+ } -+}; -+ -+static void __init dir825b1_setup(void) ++static void __init aw_nr580_setup(void) +{ -+ u8 mac[6], i; -+ -+ memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6); -+ for(i = 5; i >= 3; i--) -+ if(++mac[i] != 0x00) break; -+ -+ ar71xx_set_mac_base(mac); -+ + ar71xx_add_device_mdio(0x0); + -+ ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth0_data.speed = SPEED_1000; ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ ar71xx_eth0_pll_data.pll_1000 = 0x11110000; -+ -+ ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth1_data.phy_mask = 0x10; -+ ar71xx_eth1_pll_data.pll_1000 = 0x11110000; + + ar71xx_add_device_eth(0); -+ ar71xx_add_device_eth(1); -+ -+ ar71xx_add_device_m25p80(&dir825b1_flash_data); -+ -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), -+ dir825b1_leds_gpio); + -+ ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(dir825b1_gpio_buttons), -+ dir825b1_gpio_buttons); ++ pb42_pci_init(); + -+ ar71xx_add_device_usb(); ++ ar71xx_add_device_m25p80(NULL); + -+ platform_device_register(&dir825b1_rtl8366s_device); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio), ++ aw_nr580_leds_gpio); + -+ ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), -+ (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_0), -+ (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), -+ (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1)); ++ ar71xx_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(aw_nr580_gpio_keys), ++ aw_nr580_gpio_keys); +} + -+MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", -+ dir825b1_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w04nu.c linux-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w04nu.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,165 @@ ++MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580", ++ aw_nr580_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-db120.c linux-2.6.39/arch/mips/ar71xx/mach-db120.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-db120.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-db120.c 2011-08-24 02:41:55.487989871 +0200 +@@ -0,0 +1,134 @@ +/* -+ * Planex MZK-W04NU board support ++ * Atheros DB120 board (WASP SoC) support + * -+ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -3941,163 +4292,131 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w04nu.c linux-2.6.39/arch/ + +#include "machtype.h" +#include "devices.h" -+#include "dev-ar913x-wmac.h" ++#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" -+#include "dev-m25p80.h" +#include "dev-usb.h" ++#include "dev-ar9xxx-wmac.h" ++#include "dev-db120-pci.h" + -+#define MZK_W04NU_GPIO_LED_USB 0 -+#define MZK_W04NU_GPIO_LED_STATUS 1 -+#define MZK_W04NU_GPIO_LED_WPS 3 -+#define MZK_W04NU_GPIO_LED_WLAN 6 -+#define MZK_W04NU_GPIO_LED_AP 15 -+#define MZK_W04NU_GPIO_LED_ROUTER 16 ++#define DB120_GPIO_LED_USB 11 ++#define DB120_GPIO_LED_WLAN_5G 12 ++#define DB120_GPIO_LED_WLAN_2G 13 ++#define DB120_GPIO_LED_STATUS 14 ++#define DB120_GPIO_LED_WPS 15 + -+#define MZK_W04NU_GPIO_BTN_APROUTER 5 -+#define MZK_W04NU_GPIO_BTN_WPS 12 -+#define MZK_W04NU_GPIO_BTN_RESET 21 ++#define DB120_GPIO_BTN_SW1 16 + -+#define MZK_W04NU_BUTTONS_POLL_INTERVAL 20 ++#define DB120_CALDATA_OFFSET 0x1000 ++#define DB120_WMAC_MAC_OFFSET 0x1002 ++ ++#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition mzk_w04nu_partitions[] = { ++static struct mtd_partition db120_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x040000, + .mask_flags = MTD_WRITEABLE, -+ } , { ++ }, { + .name = "u-boot-env", + .offset = 0x040000, + .size = 0x010000, -+ } , { -+ .name = "kernel", -+ .offset = 0x050000, -+ .size = 0x160000, -+ } , { ++ }, { + .name = "rootfs", -+ .offset = 0x1b0000, ++ .offset = 0x050000, + .size = 0x630000, -+ } , { -+ .name = "art", -+ .offset = 0x7e0000, -+ .size = 0x020000, ++ }, { ++ .name = "uImage", ++ .offset = 0x680000, ++ .size = 0x160000, ++ }, { ++ .name = "NVRAM", ++ .offset = 0x7E0000, ++ .size = 0x010000, ++ }, { ++ .name = "ART", ++ .offset = 0x7F0000, ++ .size = 0x010000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "firmware", -+ .offset = 0x050000, -+ .size = 0x790000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data mzk_w04nu_flash_data = { ++static struct flash_platform_data db120_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = mzk_w04nu_partitions, -+ .nr_parts = ARRAY_SIZE(mzk_w04nu_partitions), ++ .parts = db120_partitions, ++ .nr_parts = ARRAY_SIZE(db120_partitions), +#endif +}; + -+static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = { ++static struct gpio_led db120_leds_gpio[] __initdata = { + { -+ .name = "mzk-w04nu:green:status", -+ .gpio = MZK_W04NU_GPIO_LED_STATUS, -+ .active_low = 1, -+ }, { -+ .name = "mzk-w04nu:blue:wps", -+ .gpio = MZK_W04NU_GPIO_LED_WPS, ++ .name = "db120:green:status", ++ .gpio = DB120_GPIO_LED_STATUS, + .active_low = 1, + }, { -+ .name = "mzk-w04nu:green:wlan", -+ .gpio = MZK_W04NU_GPIO_LED_WLAN, ++ .name = "db120:green:wps", ++ .gpio = DB120_GPIO_LED_WPS, + .active_low = 1, + }, { -+ .name = "mzk-w04nu:green:usb", -+ .gpio = MZK_W04NU_GPIO_LED_USB, ++ .name = "db120:green:wlan-5g", ++ .gpio = DB120_GPIO_LED_WLAN_5G, + .active_low = 1, + }, { -+ .name = "mzk-w04nu:green:ap", -+ .gpio = MZK_W04NU_GPIO_LED_AP, ++ .name = "db120:green:wlan-2g", ++ .gpio = DB120_GPIO_LED_WLAN_2G, + .active_low = 1, + }, { -+ .name = "mzk-w04nu:green:router", -+ .gpio = MZK_W04NU_GPIO_LED_ROUTER, ++ .name = "db120:green:usb", ++ .gpio = DB120_GPIO_LED_USB, + .active_low = 1, + } +}; + -+static struct gpio_button mzk_w04nu_gpio_buttons[] __initdata = { ++static struct gpio_keys_button db120_gpio_keys[] __initdata = { + { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = MZK_W04NU_GPIO_BTN_RESET, -+ .active_low = 1, -+ }, { -+ .desc = "wps", ++ .desc = "sw1", + .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = MZK_W04NU_GPIO_BTN_WPS, ++ .code = BTN_0, ++ .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = DB120_GPIO_BTN_SW1, + .active_low = 1, -+ }, { -+ .desc = "aprouter", -+ .type = EV_KEY, -+ .code = BTN_2, -+ .threshold = 3, -+ .gpio = MZK_W04NU_GPIO_BTN_APROUTER, -+ .active_low = 0, + } +}; + -+#define MZK_W04NU_WAN_PHYMASK BIT(4) -+#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK) -+ -+static void __init mzk_w04nu_setup(void) ++static void __init db120_setup(void) +{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ar71xx_set_mac_base(eeprom); -+ -+ ar71xx_add_device_mdio(MZK_W04NU_MDIO_MASK); -+ -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.speed = SPEED_100; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ ar71xx_eth0_data.has_ar8216 = 1; ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK; ++ ar71xx_add_device_usb(); + -+ ar71xx_add_device_eth(0); -+ ar71xx_add_device_eth(1); ++ ar71xx_add_device_m25p80(&db120_flash_data); + -+ ar71xx_add_device_m25p80(&mzk_w04nu_flash_data); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), ++ db120_leds_gpio); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio), -+ mzk_w04nu_leds_gpio); ++ ar71xx_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(db120_gpio_keys), ++ db120_gpio_keys); + -+ ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(mzk_w04nu_gpio_buttons), -+ mzk_w04nu_gpio_buttons); -+ ar71xx_add_device_usb(); ++ ar9xxx_add_device_wmac(art + DB120_CALDATA_OFFSET, ++ art + DB120_WMAC_MAC_OFFSET); + -+ ar913x_add_device_wmac(eeprom, NULL); ++ db120_pci_init(); +} + -+MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU", -+ mzk_w04nu_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w300nh.c linux-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w300nh.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,158 @@ ++MIPS_MACHINE(AR71XX_MACH_DB120, "DB120", "Atheros DB120", db120_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-600-a1.c linux-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-600-a1.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c 2011-08-24 02:41:55.487989871 +0200 +@@ -0,0 +1,159 @@ +/* -+ * Planex MZK-W300NH board support ++ * D-Link DIR-600 rev. A1 board support + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -4112,1641 +4431,1772 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w300nh.c linux-2.6.39/arch +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-ar913x-wmac.h" ++#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" ++#include "nvram.h" + -+#define MZK_W300NH_GPIO_LED_STATUS 1 -+#define MZK_W300NH_GPIO_LED_WPS 3 -+#define MZK_W300NH_GPIO_LED_WLAN 6 -+#define MZK_W300NH_GPIO_LED_AP 15 -+#define MZK_W300NH_GPIO_LED_ROUTER 16 ++#define DIR_600_A1_GPIO_LED_WPS 0 ++#define DIR_600_A1_GPIO_LED_POWER_AMBER 1 ++#define DIR_600_A1_GPIO_LED_POWER_GREEN 6 + -+#define MZK_W300NH_GPIO_BTN_APROUTER 5 -+#define MZK_W300NH_GPIO_BTN_WPS 12 -+#define MZK_W300NH_GPIO_BTN_RESET 21 ++#define DIR_600_A1_GPIO_BTN_RESET 8 ++#define DIR_600_A1_GPIO_BTN_WPS 12 + -+#define MZK_W04NU_BUTTONS_POLL_INTERVAL 20 ++#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL) ++ ++#define DIR_600_A1_NVRAM_ADDR 0x1f030000 ++#define DIR_600_A1_NVRAM_SIZE 0x10000 + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition mzk_w300nh_partitions[] = { ++static struct mtd_partition dir_600_a1_partitions[] = { + { + .name = "u-boot", + .offset = 0, -+ .size = 0x040000, ++ .size = 0x030000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "u-boot-env", -+ .offset = 0x040000, ++ }, { ++ .name = "nvram", ++ .offset = 0x030000, + .size = 0x010000, -+ } , { ++ }, { + .name = "kernel", -+ .offset = 0x050000, -+ .size = 0x160000, -+ } , { ++ .offset = 0x040000, ++ .size = 0x0e0000, ++ }, { + .name = "rootfs", -+ .offset = 0x1b0000, -+ .size = 0x630000, -+ } , { ++ .offset = 0x120000, ++ .size = 0x2c0000, ++ }, { ++ .name = "mac", ++ .offset = 0x3e0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { + .name = "art", -+ .offset = 0x7e0000, -+ .size = 0x020000, ++ .offset = 0x3f0000, ++ .size = 0x010000, + .mask_flags = MTD_WRITEABLE, -+ } , { ++ }, { + .name = "firmware", -+ .offset = 0x050000, -+ .size = 0x790000, ++ .offset = 0x040000, ++ .size = 0x3a0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data mzk_w300nh_flash_data = { ++static struct flash_platform_data dir_600_a1_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = mzk_w300nh_partitions, -+ .nr_parts = ARRAY_SIZE(mzk_w300nh_partitions), ++ .parts = dir_600_a1_partitions, ++ .nr_parts = ARRAY_SIZE(dir_600_a1_partitions), +#endif +}; + -+static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = { ++static struct gpio_led dir_600_a1_leds_gpio[] __initdata = { + { -+ .name = "mzk-w300nh:green:status", -+ .gpio = MZK_W300NH_GPIO_LED_STATUS, -+ .active_low = 1, -+ }, { -+ .name = "mzk-w300nh:blue:wps", -+ .gpio = MZK_W300NH_GPIO_LED_WPS, -+ .active_low = 1, -+ }, { -+ .name = "mzk-w300nh:green:wlan", -+ .gpio = MZK_W300NH_GPIO_LED_WLAN, -+ .active_low = 1, ++ .name = "dir-600-a1:green:power", ++ .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN, + }, { -+ .name = "mzk-w300nh:green:ap", -+ .gpio = MZK_W300NH_GPIO_LED_AP, -+ .active_low = 1, ++ .name = "dir-600-a1:amber:power", ++ .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER, + }, { -+ .name = "mzk-w300nh:green:router", -+ .gpio = MZK_W300NH_GPIO_LED_ROUTER, ++ .name = "dir-600-a1:blue:wps", ++ .gpio = DIR_600_A1_GPIO_LED_WPS, + .active_low = 1, + } +}; + -+static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = { ++static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = MZK_W300NH_GPIO_BTN_RESET, ++ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = DIR_600_A1_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = MZK_W300NH_GPIO_BTN_WPS, ++ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = DIR_600_A1_GPIO_BTN_WPS, + .active_low = 1, -+ }, { -+ .desc = "aprouter", -+ .type = EV_KEY, -+ .code = BTN_2, -+ .threshold = 3, -+ .gpio = MZK_W300NH_GPIO_BTN_APROUTER, -+ .active_low = 0, + } +}; + -+#define MZK_W300NH_WAN_PHYMASK BIT(4) -+#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK) -+ -+static void __init mzk_w300nh_setup(void) ++static void __init dir_600_a1_setup(void) +{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ u8 mac_buff[6]; ++ u8 *mac = NULL; ++ ++ if (nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE, ++ "lan_mac=", mac_buff) == 0) { ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_buff, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_buff, 1); ++ mac = mac_buff; ++ } + -+ ar71xx_set_mac_base(eeprom); ++ ar71xx_add_device_m25p80(&dir_600_a1_flash_data); + -+ ar71xx_add_device_mdio(MZK_W300NH_MDIO_MASK); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio), ++ dir_600_a1_leds_gpio); ++ ++ ar71xx_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(dir_600_a1_gpio_keys), ++ dir_600_a1_gpio_keys); + ++ ar71xx_eth1_data.has_ar7240_switch = 1; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); ++ ++ /* WAN port */ + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ ar71xx_eth0_data.has_ar8216 = 1; ++ ar71xx_eth0_data.phy_mask = BIT(4); + ++ /* LAN ports */ + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; + -+ ar71xx_add_device_eth(0); ++ ar71xx_add_device_mdio(0x0); + ar71xx_add_device_eth(1); ++ ar71xx_add_device_eth(0); + -+ ar71xx_add_device_m25p80(&mzk_w300nh_flash_data); -+ -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio), -+ mzk_w300nh_leds_gpio); -+ -+ ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(mzk_w300nh_gpio_buttons), -+ mzk_w300nh_gpio_buttons); -+ ar913x_add_device_wmac(eeprom, NULL); ++ ap91_pci_init(ee, mac); +} + -+MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH", -+ mzk_w300nh_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-nbg460n.c linux-2.6.39/arch/mips/ar71xx/mach-nbg460n.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-nbg460n.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-nbg460n.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,222 @@ ++MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1", ++ dir_600_a1_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-615-c1.c linux-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-615-c1.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c 2011-08-24 02:41:55.487989871 +0200 +@@ -0,0 +1,175 @@ +/* -+ * Zyxel NBG 460N/550N/550NH board support -+ * -+ * Copyright (C) 2010 Michael Kurz ++ * D-Link DIR-615 rev C1 board support + * -+ * based on mach-tl-wr1043nd.c ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include +#include +#include -+#include -+#include -+ -+#include -+#include -+#include + +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-ar913x-wmac.h" ++#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" ++#include "nvram.h" + -+/* LEDs */ -+#define NBG460N_GPIO_LED_WPS 3 -+#define NBG460N_GPIO_LED_WAN 6 -+#define NBG460N_GPIO_LED_POWER 14 -+#define NBG460N_GPIO_LED_WLAN 15 ++#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */ ++#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */ ++#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */ ++#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */ ++#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */ ++#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */ ++#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */ + -+/* Buttons */ -+#define NBG460N_GPIO_BTN_WPS 12 -+#define NBG460N_GPIO_BTN_RESET 21 -+#define NBG460N_BUTTONS_POLL_INTERVAL 20 ++/* buttons may need refinement */ + -+/* RTC chip PCF8563 I2C interface */ -+#define NBG460N_GPIO_PCF8563_SDA 8 -+#define NBG460N_GPIO_PCF8563_SCK 7 ++#define DIR_615C1_GPIO_BTN_WPS 12 ++#define DIR_615C1_GPIO_BTN_RESET 21 + -+/* Switch configuration I2C interface */ -+#define NBG460N_GPIO_RTL8366_SDA 16 -+#define NBG460N_GPIO_RTL8366_SCK 18 ++#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL) ++ ++#define DIR_615C1_CONFIG_ADDR 0x1f020000 ++#define DIR_615C1_CONFIG_SIZE 0x10000 + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition nbg460n_partitions[] = { ++static struct mtd_partition dir_615c1_partitions[] = { + { -+ .name = "Bootbase", ++ .name = "u-boot", + .offset = 0, -+ .size = 0x010000, ++ .size = 0x020000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "U-Boot Config", -+ .offset = 0x010000, -+ .size = 0x030000, -+ } , { -+ .name = "U-Boot", -+ .offset = 0x040000, -+ .size = 0x030000, -+ } , { -+ .name = "linux", -+ .offset = 0x070000, ++ }, { ++ .name = "config", ++ .offset = 0x020000, ++ .size = 0x010000, ++ }, { ++ .name = "kernel", ++ .offset = 0x030000, + .size = 0x0e0000, -+ } , { ++ }, { + .name = "rootfs", -+ .offset = 0x150000, -+ .size = 0x2a0000, -+ } , { -+ .name = "CalibData", ++ .offset = 0x110000, ++ .size = 0x2e0000, ++ }, { ++ .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, -+ } , { ++ }, { + .name = "firmware", -+ .offset = 0x070000, -+ .size = 0x380000, ++ .offset = 0x030000, ++ .size = 0x3c0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data nbg460n_flash_data = { ++static struct flash_platform_data dir_615c1_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = nbg460n_partitions, -+ .nr_parts = ARRAY_SIZE(nbg460n_partitions), ++ .parts = dir_615c1_partitions, ++ .nr_parts = ARRAY_SIZE(dir_615c1_partitions), +#endif +}; + -+static struct gpio_led nbg460n_leds_gpio[] __initdata = { ++static struct gpio_led dir_615c1_leds_gpio[] __initdata = { + { -+ .name = "nbg460n:green:power", -+ .gpio = NBG460N_GPIO_LED_POWER, -+ .active_low = 0, -+ .default_trigger = "default-on", ++ .name = "dir-615c1:orange:status", ++ .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS, ++ .active_low = 1, + }, { -+ .name = "nbg460n:green:wps", -+ .gpio = NBG460N_GPIO_LED_WPS, -+ .active_low = 0, ++ .name = "dir-615c1:blue:wps", ++ .gpio = DIR_615C1_GPIO_LED_BLUE_WPS, ++ .active_low = 1, + }, { -+ .name = "nbg460n:green:wlan", -+ .gpio = NBG460N_GPIO_LED_WLAN, -+ .active_low = 0, ++ .name = "dir-615c1:green:wan", ++ .gpio = DIR_615C1_GPIO_LED_GREEN_WAN, ++ .active_low = 1, + }, { -+ /* Not really for controlling the LED, -+ when set low the LED blinks uncontrollable */ -+ .name = "nbg460n:green:wan", -+ .gpio = NBG460N_GPIO_LED_WAN, -+ .active_low = 0, ++ .name = "dir-615c1:green:wancpu", ++ .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU, ++ .active_low = 1, ++ }, { ++ .name = "dir-615c1:green:wlan", ++ .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN, ++ .active_low = 1, ++ }, { ++ .name = "dir-615c1:green:status", ++ .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS, ++ .active_low = 1, ++ }, { ++ .name = "dir-615c1:orange:wan", ++ .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN, ++ .active_low = 1, + } ++ +}; + -+static struct gpio_button nbg460n_gpio_buttons[] __initdata = { ++static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = NBG460N_GPIO_BTN_RESET, -+ .active_low = 1, ++ .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = DIR_615C1_GPIO_BTN_RESET, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = NBG460N_GPIO_BTN_WPS, -+ .active_low = 1, ++ .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = DIR_615C1_GPIO_BTN_WPS, + } +}; + -+static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = { -+ .sda_pin = NBG460N_GPIO_PCF8563_SDA, -+ .scl_pin = NBG460N_GPIO_PCF8563_SCK, -+ .udelay = 10, -+}; -+ -+static struct platform_device nbg460n_i2c_device = { -+ .name = "i2c-gpio", -+ .id = -1, -+ .num_resources = 0, -+ .resource = NULL, -+ .dev = { -+ .platform_data = &nbg460n_i2c_device_platdata, -+ }, -+}; -+ -+static struct i2c_board_info nbg460n_i2c_devs[] __initdata = { -+ { -+ I2C_BOARD_INFO("pcf8563", 0x51), -+ }, -+}; ++#define DIR_615C1_LAN_PHYMASK BIT(0) ++#define DIR_615C1_WAN_PHYMASK BIT(4) ++#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \ ++ DIR_615C1_WAN_PHYMASK)) + -+static void __devinit nbg460n_i2c_init(void) ++static void __init dir_615c1_setup(void) +{ -+ /* The gpio interface */ -+ platform_device_register(&nbg460n_i2c_device); -+ /* I2C devices */ -+ i2c_register_board_info(0, nbg460n_i2c_devs, -+ ARRAY_SIZE(nbg460n_i2c_devs)); -+} -+ -+ -+static struct rtl8366s_platform_data nbg460n_rtl8366s_data = { -+ .gpio_sda = NBG460N_GPIO_RTL8366_SDA, -+ .gpio_sck = NBG460N_GPIO_RTL8366_SCK, -+}; ++ const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR); ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ u8 mac[6]; ++ u8 *wlan_mac = NULL; + -+static struct platform_device nbg460n_rtl8366s_device = { -+ .name = RTL8366S_DRIVER_NAME, -+ .id = -1, -+ .dev = { -+ .platform_data = &nbg460n_rtl8366s_data, ++ if (nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE, ++ "lan_mac=", mac) == 0) { ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); ++ wlan_mac = mac; + } -+}; + -+static void __init nbg460n_setup(void) -+{ -+ /* end of bootloader sector contains mac address*/ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8); -+ /* last sector contains wlan calib data */ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ ar71xx_add_device_mdio(DIR_615C1_MDIO_MASK); + -+ ar71xx_set_mac_base(mac); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK; + -+ /* LAN Port */ -+ ar71xx_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth0_data.speed = SPEED_1000; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ -+ /* WAN Port */ -+ ar71xx_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth1_data.phy_mask = 0x10; ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + -+ /* register the switch phy */ -+ platform_device_register(&nbg460n_rtl8366s_device); -+ -+ /* register flash */ -+ ar71xx_add_device_m25p80(&nbg460n_flash_data); -+ -+ ar913x_add_device_wmac(eeprom, mac); ++ ar71xx_add_device_m25p80(&dir_615c1_flash_data); + -+ /* register RTC chip */ -+ nbg460n_i2c_init(); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio), ++ dir_615c1_leds_gpio); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio), -+ nbg460n_leds_gpio); ++ ar71xx_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(dir_615c1_gpio_keys), ++ dir_615c1_gpio_keys); + -+ ar71xx_add_device_gpio_buttons(-1, NBG460N_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(nbg460n_gpio_buttons), -+ nbg460n_gpio_buttons); ++ ar9xxx_add_device_wmac(eeprom, wlan_mac); +} + -+MIPS_MACHINE(AR71XX_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH", nbg460n_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb42.c linux-2.6.39/arch/mips/ar71xx/mach-pb42.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-pb42.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-pb42.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,71 @@ ++MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1", ++ dir_615c1_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-825-b1.c linux-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-825-b1.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c 2011-08-24 02:41:55.487989871 +0200 +@@ -0,0 +1,198 @@ +/* -+ * Atheros PB42 board support ++ * D-Link DIR-825 rev. B1 board support + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o. ++ * ++ * based on mach-wndr3700.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + ++#include ++#include ++#include ++#include ++#include ++ +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" ++#include "dev-ap94-pci.h" +#include "dev-gpio-buttons.h" -+#include "dev-pb42-pci.h" ++#include "dev-leds-gpio.h" +#include "dev-usb.h" + -+#define PB42_BUTTONS_POLL_INTERVAL 20 ++#define DIR825B1_GPIO_LED_BLUE_USB 0 ++#define DIR825B1_GPIO_LED_ORANGE_POWER 1 ++#define DIR825B1_GPIO_LED_BLUE_POWER 2 ++#define DIR825B1_GPIO_LED_BLUE_WPS 4 ++#define DIR825B1_GPIO_LED_ORANGE_PLANET 6 ++#define DIR825B1_GPIO_LED_BLUE_PLANET 11 ++ ++#define DIR825B1_GPIO_BTN_RESET 3 ++#define DIR825B1_GPIO_BTN_WPS 8 + -+#define PB42_GPIO_BTN_SW4 8 -+#define PB42_GPIO_BTN_SW5 3 ++#define DIR825B1_GPIO_RTL8366_SDA 5 ++#define DIR825B1_GPIO_RTL8366_SCK 7 ++ ++#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL) ++ ++#define DIR825B1_CAL_LOCATION_0 0x1f661000 ++#define DIR825B1_CAL_LOCATION_1 0x1f665000 ++ ++#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8 ++#define DIR825B1_MAC_LOCATION_1 0x2ffa8370 ++ ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition dir825b1_partitions[] = { ++ { ++ .name = "uboot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "config", ++ .offset = 0x040000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x050000, ++ .size = 0x610000, ++ }, { ++ .name = "caldata", ++ .offset = 0x660000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "unknown", ++ .offset = 0x670000, ++ .size = 0x190000, ++ .mask_flags = MTD_WRITEABLE, ++ } ++}; ++#endif /* CONFIG_MTD_PARTITIONS */ ++ ++static struct flash_platform_data dir825b1_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = dir825b1_partitions, ++ .nr_parts = ARRAY_SIZE(dir825b1_partitions), ++#endif ++}; + -+static struct gpio_button pb42_gpio_buttons[] __initdata = { ++static struct gpio_led dir825b1_leds_gpio[] __initdata = { + { -+ .desc = "sw4", ++ .name = "dir825b1:blue:usb", ++ .gpio = DIR825B1_GPIO_LED_BLUE_USB, ++ .active_low = 1, ++ }, { ++ .name = "dir825b1:orange:power", ++ .gpio = DIR825B1_GPIO_LED_ORANGE_POWER, ++ .active_low = 1, ++ }, { ++ .name = "dir825b1:blue:power", ++ .gpio = DIR825B1_GPIO_LED_BLUE_POWER, ++ .active_low = 1, ++ }, { ++ .name = "dir825b1:blue:wps", ++ .gpio = DIR825B1_GPIO_LED_BLUE_WPS, ++ .active_low = 1, ++ }, { ++ .name = "dir825b1:orange:planet", ++ .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET, ++ .active_low = 1, ++ }, { ++ .name = "dir825b1:blue:planet", ++ .gpio = DIR825B1_GPIO_LED_BLUE_PLANET, ++ .active_low = 1, ++ } ++}; ++ ++static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", + .type = EV_KEY, -+ .code = BTN_0, -+ .threshold = 3, -+ .gpio = PB42_GPIO_BTN_SW4, ++ .code = KEY_RESTART, ++ .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = DIR825B1_GPIO_BTN_RESET, + .active_low = 1, -+ } , { -+ .desc = "sw5", ++ }, { ++ .desc = "wps", + .type = EV_KEY, -+ .code = BTN_1, -+ .threshold = 3, -+ .gpio = PB42_GPIO_BTN_SW5, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = DIR825B1_GPIO_BTN_WPS, + .active_low = 1, + } +}; + -+#define PB42_WAN_PHYMASK BIT(20) -+#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) -+#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK) ++static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = { ++ { .reg = 0x06, .val = 0x0108 }, ++}; + -+static void __init pb42_init(void) ++static struct rtl8366_platform_data dir825b1_rtl8366s_data = { ++ .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, ++ .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, ++ .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals), ++ .initvals = dir825b1_rtl8366s_initvals, ++}; ++ ++static struct platform_device dir825b1_rtl8366s_device = { ++ .name = RTL8366S_DRIVER_NAME, ++ .id = -1, ++ .dev = { ++ .platform_data = &dir825b1_rtl8366s_data, ++ } ++}; ++ ++static void __init dir825b1_setup(void) +{ -+ ar71xx_add_device_m25p80(NULL); ++ u8 *mac = (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1); + -+ ar71xx_add_device_mdio(~PB42_MDIO_PHYMASK); ++ ar71xx_add_device_mdio(0x0); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ar71xx_eth0_data.phy_mask = PB42_WAN_PHYMASK; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); ++ ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.speed = SPEED_1000; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_pll_data.pll_1000 = 0x11110000; + -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.speed = SPEED_100; -+ ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2); ++ ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.phy_mask = 0x10; ++ ar71xx_eth1_pll_data.pll_1000 = 0x11110000; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + -+ ar71xx_add_device_gpio_buttons(-1, PB42_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(pb42_gpio_buttons), -+ pb42_gpio_buttons); ++ ar71xx_add_device_m25p80(&dir825b1_flash_data); + -+ pb42_pci_init(); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio), ++ dir825b1_leds_gpio); ++ ++ ar71xx_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(dir825b1_gpio_keys), ++ dir825b1_gpio_keys); ++ ++ ar71xx_add_device_usb(); ++ ++ platform_device_register(&dir825b1_rtl8366s_device); ++ ++ ap94_pci_setup_wmac_led_pin(0, 5); ++ ap94_pci_setup_wmac_led_pin(1, 5); ++ ++ ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), ++ (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_0), ++ (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), ++ (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1)); +} + -+MIPS_MACHINE(AR71XX_MACH_PB42, "PB42", "Atheros PB42", pb42_init); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb44.c linux-2.6.39/arch/mips/ar71xx/mach-pb44.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-pb44.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-pb44.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,207 @@ ++MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", ++ dir825b1_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-eap7660d.c linux-2.6.39/arch/mips/ar71xx/mach-eap7660d.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-eap7660d.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-eap7660d.c 2011-08-24 02:41:55.497990784 +0200 +@@ -0,0 +1,180 @@ +/* -+ * Atheros PB44 board support ++ * Senao EAP7660D board support + * -+ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2010 Daniel Golle ++ * Copyright (C) 2008 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include ++#include ++#include +#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ +#include ++#include + +#include "machtype.h" +#include "devices.h" -+#include "dev-pb42-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" -+#include "dev-usb.h" ++#include "dev-m25p80.h" + -+#define PB44_PCF8757_VSC7395_CS 0 -+#define PB44_PCF8757_STEREO_CS 1 -+#define PB44_PCF8757_SLIC_CS0 2 -+#define PB44_PCF8757_SLIC_TEST 3 -+#define PB44_PCF8757_SLIC_INT0 4 -+#define PB44_PCF8757_SLIC_INT1 5 -+#define PB44_PCF8757_SW_RESET 6 -+#define PB44_PCF8757_SW_JUMP 8 -+#define PB44_PCF8757_LED_JUMP1 9 -+#define PB44_PCF8757_LED_JUMP2 10 -+#define PB44_PCF8757_TP24 11 -+#define PB44_PCF8757_TP25 12 -+#define PB44_PCF8757_TP26 13 -+#define PB44_PCF8757_TP27 14 -+#define PB44_PCF8757_TP28 15 ++#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL) ++ ++#define EAP7660D_GPIO_DS4 7 ++#define EAP7660D_GPIO_DS5 2 ++#define EAP7660D_GPIO_DS7 0 ++#define EAP7660D_GPIO_DS8 4 ++#define EAP7660D_GPIO_SW1 3 ++#define EAP7660D_GPIO_SW3 8 ++#define EAP7660D_PHYMASK BIT(20) ++#define EAP7660D_BOARDCONFIG 0x1F7F0000 ++#define EAP7660D_GBIC_MAC_OFFSET 0x1000 ++#define EAP7660D_WMAC0_MAC_OFFSET 0x1010 ++#define EAP7660D_WMAC1_MAC_OFFSET 0x1016 ++#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000 ++#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000 ++ ++static struct ath5k_platform_data eap7660d_wmac0_data; ++static struct ath5k_platform_data eap7660d_wmac1_data; ++static char eap7660d_wmac0_mac[6]; ++static char eap7660d_wmac1_mac[6]; ++static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; ++static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS]; ++ ++#ifdef CONFIG_PCI ++static struct ar71xx_pci_irq eap7660d_pci_irqs[] __initdata = { ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, ++ }, { ++ .slot = 1, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV1, ++ } ++}; + -+#define PB44_GPIO_I2C_SCL 0 -+#define PB44_GPIO_I2C_SDA 1 ++static int eap7660d_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ switch (PCI_SLOT(dev->devfn)) { ++ case 17: ++ dev->dev.platform_data = &eap7660d_wmac0_data; ++ break; + -+#define PB44_GPIO_EXP_BASE 16 -+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) -+#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_RESET) -+#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_JUMP) -+#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP1) -+#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP2) ++ case 18: ++ dev->dev.platform_data = &eap7660d_wmac1_data; ++ break; ++ } + -+static struct i2c_gpio_platform_data pb44_i2c_gpio_data = { -+ .sda_pin = PB44_GPIO_I2C_SDA, -+ .scl_pin = PB44_GPIO_I2C_SCL, -+}; ++ return 0; ++} + -+static struct platform_device pb44_i2c_gpio_device = { -+ .name = "i2c-gpio", -+ .id = 0, -+ .dev = { -+ .platform_data = &pb44_i2c_gpio_data, ++void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, ++ u8 *cal_data1, u8 *mac_addr1) ++{ ++ if (cal_data0 && *cal_data0 == 0xa55a) { ++ memcpy(eap7660d_wmac0_eeprom, cal_data0, ++ ATH5K_PLAT_EEP_MAX_WORDS); ++ eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom; + } -+}; + -+static struct pcf857x_platform_data pb44_pcf857x_data = { -+ .gpio_base = PB44_GPIO_EXP_BASE, -+}; ++ if (cal_data1 && *cal_data1 == 0xa55a) { ++ memcpy(eap7660d_wmac1_eeprom, cal_data1, ++ ATH5K_PLAT_EEP_MAX_WORDS); ++ eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom; ++ } + -+static struct i2c_board_info pb44_i2c_board_info[] __initdata = { ++ if (mac_addr0) { ++ memcpy(eap7660d_wmac0_mac, mac_addr0, ++ sizeof(eap7660d_wmac0_mac)); ++ eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac; ++ } ++ ++ if (mac_addr1) { ++ memcpy(eap7660d_wmac1_mac, mac_addr1, ++ sizeof(eap7660d_wmac1_mac)); ++ eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac; ++ } ++ ++ ar71xx_pci_plat_dev_init = eap7660d_pci_plat_dev_init; ++ ar71xx_pci_init(ARRAY_SIZE(eap7660d_pci_irqs), eap7660d_pci_irqs); ++} ++#else ++static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0, ++ u8 *cal_data1, u8 *mac_addr1) ++{ ++} ++#endif /* CONFIG_PCI */ ++ ++static struct gpio_led eap7660d_leds_gpio[] __initdata = { + { -+ I2C_BOARD_INFO("pcf8575", 0x20), -+ .platform_data = &pb44_pcf857x_data, ++ .name = "eap7660d:green:ds8", ++ .gpio = EAP7660D_GPIO_DS8, ++ .active_low = 0, + }, -+}; -+ -+static struct gpio_led pb44_leds_gpio[] __initdata = { + { -+ .name = "pb44:amber:jump1", -+ .gpio = PB44_GPIO_LED_JUMP1, -+ .active_low = 1, -+ }, { -+ .name = "pb44:green:jump2", -+ .gpio = PB44_GPIO_LED_JUMP2, -+ .active_low = 1, ++ .name = "eap7660d:green:ds5", ++ .gpio = EAP7660D_GPIO_DS5, ++ .active_low = 0, ++ }, ++ { ++ .name = "eap7660d:green:ds7", ++ .gpio = EAP7660D_GPIO_DS7, ++ .active_low = 0, + }, ++ { ++ .name = "eap7660d:green:ds4", ++ .gpio = EAP7660D_GPIO_DS4, ++ .active_low = 0, ++ } +}; + -+static struct gpio_button pb44_gpio_buttons[] __initdata = { ++static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = { + { -+ .desc = "soft_reset", ++ .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = PB44_GPIO_SW_RESET, ++ .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = EAP7660D_GPIO_SW1, + .active_low = 1, -+ } , { -+ .desc = "jumpstart", ++ }, ++ { ++ .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = PB44_GPIO_SW_JUMP, ++ .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = EAP7660D_GPIO_SW3, + .active_low = 1, + } +}; + -+static void pb44_vsc7395_reset(void) ++static void __init eap7660d_setup(void) +{ -+ ar71xx_device_stop(RESET_MODULE_GE1_PHY); -+ udelay(10); -+ ar71xx_device_start(RESET_MODULE_GE1_PHY); -+ mdelay(50); -+} ++ u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG); + -+static struct vsc7385_platform_data pb44_vsc7395_data = { -+ .reset = pb44_vsc7395_reset, -+ .ucode_name = "vsc7395_ucode_pb44.bin", -+ .mac_cfg = { -+ .tx_ipg = 6, -+ .bit2 = 1, -+ .clk_sel = 0, -+ }, -+}; ++ ar71xx_add_device_mdio(~EAP7660D_PHYMASK); + -+static struct spi_board_info pb44_spi_info[] = { ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ++ boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.phy_mask = EAP7660D_PHYMASK; ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_m25p80(NULL); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio), ++ eap7660d_leds_gpio); ++ ar71xx_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(eap7660d_gpio_keys), ++ eap7660d_gpio_keys); ++ eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET, ++ boardconfig + EAP7660D_WMAC0_MAC_OFFSET, ++ boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET, ++ boardconfig + EAP7660D_WMAC1_MAC_OFFSET); ++}; ++ ++MIPS_MACHINE(AR71XX_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D", ++ eap7660d_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ja76pf.c linux-2.6.39/arch/mips/ar71xx/mach-ja76pf.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-ja76pf.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ja76pf.c 2011-08-24 02:41:55.517989552 +0200 +@@ -0,0 +1,102 @@ ++/* ++ * jjPlus JA76PF board support ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include "machtype.h" ++#include "devices.h" ++#include "dev-m25p80.h" ++#include "dev-gpio-buttons.h" ++#include "dev-pb42-pci.h" ++#include "dev-usb.h" ++#include "dev-leds-gpio.h" ++ ++#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL) ++ ++#define JA76PF_GPIO_I2C_SCL 0 ++#define JA76PF_GPIO_I2C_SDA 1 ++#define JA76PF_GPIO_LED_1 5 ++#define JA76PF_GPIO_LED_2 4 ++#define JA76PF_GPIO_LED_3 3 ++#define JA76PF_GPIO_BTN_RESET 11 ++ ++static struct gpio_led ja76pf_leds_gpio[] __initdata = { + { -+ .bus_num = 0, -+ .chip_select = 0, -+ .max_speed_hz = 25000000, -+ .modalias = "m25p80", ++ .name = "ja76pf:green:led1", ++ .gpio = JA76PF_GPIO_LED_1, ++ .active_low = 1, + }, { -+ .bus_num = 0, -+ .chip_select = 1, -+ .max_speed_hz = 25000000, -+ .modalias = "spi-vsc7385", -+ .platform_data = &pb44_vsc7395_data, -+ .controller_data = (void *) PB44_GPIO_VSC7395_CS, -+ }, ++ .name = "ja76pf:green:led2", ++ .gpio = JA76PF_GPIO_LED_2, ++ .active_low = 1, ++ }, { ++ .name = "ja76pf:green:led3", ++ .gpio = JA76PF_GPIO_LED_3, ++ .active_low = 1, ++ } +}; + -+static struct resource pb44_spi_resources[] = { -+ [0] = { -+ .start = AR71XX_SPI_BASE, -+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, ++static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = JA76PF_GPIO_BTN_RESET, ++ .active_low = 1, ++ } +}; + -+static struct ar71xx_spi_platform_data pb44_spi_data = { -+ .bus_num = 0, -+ .num_chipselect = 2, ++static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = { ++ .sda_pin = JA76PF_GPIO_I2C_SDA, ++ .scl_pin = JA76PF_GPIO_I2C_SCL, +}; + -+static struct platform_device pb44_spi_device = { -+ .name = "pb44-spi", -+ .id = -1, -+ .resource = pb44_spi_resources, -+ .num_resources = ARRAY_SIZE(pb44_spi_resources), ++static struct platform_device ja76pf_i2c_gpio_device = { ++ .name = "i2c-gpio", ++ .id = 0, + .dev = { -+ .platform_data = &pb44_spi_data, -+ }, ++ .platform_data = &ja76pf_i2c_gpio_data, ++ } +}; + -+#define PB44_WAN_PHYMASK BIT(0) -+#define PB44_LAN_PHYMASK 0 -+#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) ++#define JA76PF_WAN_PHYMASK (1 << 4) ++#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3)) ++#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK) + -+static void __init pb44_init(void) ++static void __init ja76pf_init(void) +{ -+ ar71xx_add_device_mdio(~PB44_MDIO_PHYMASK); ++ ar71xx_add_device_m25p80(NULL); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth0_data.phy_mask = PB44_WAN_PHYMASK; ++ ar71xx_add_device_mdio(~JA76PF_MDIO_PHYMASK); + -+ ar71xx_add_device_eth(0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.phy_mask = JA76PF_LAN_PHYMASK; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.phy_mask = JA76PF_WAN_PHYMASK; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; -+ ar71xx_eth1_pll_data.pll_1000 = 0x110000; + ++ ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + -+ ar71xx_add_device_usb(); -+ -+ pb42_pci_init(); -+ -+ i2c_register_board_info(0, pb44_i2c_board_info, -+ ARRAY_SIZE(pb44_i2c_board_info)); -+ -+ platform_device_register(&pb44_i2c_gpio_device); ++ platform_device_register(&ja76pf_i2c_gpio_device); + -+ spi_register_board_info(pb44_spi_info, ARRAY_SIZE(pb44_spi_info)); -+ platform_device_register(&pb44_spi_device); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio), ++ ja76pf_leds_gpio); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio), -+ pb44_leds_gpio); ++ ar71xx_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ja76pf_gpio_keys), ++ ja76pf_gpio_keys); + -+ ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(pb44_gpio_buttons), -+ pb44_gpio_buttons); ++ ar71xx_add_device_usb(); ++ pb42_pci_init(); +} + -+MIPS_MACHINE(AR71XX_MACH_PB44, "PB44", "Atheros PB44", pb44_init); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb92.c linux-2.6.39/arch/mips/ar71xx/mach-pb92.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-pb92.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-pb92.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,109 @@ ++MIPS_MACHINE(AR71XX_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-jwap003.c linux-2.6.39/arch/mips/ar71xx/mach-jwap003.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-jwap003.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-jwap003.c 2011-08-24 02:41:55.517989552 +0200 +@@ -0,0 +1,83 @@ +/* -+ * Atheros PB92 board support -+ * -+ * Copyright (C) 2010 Felix Fietkau -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * jjPlus JWAP003 board support + * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. + */ + -+#include -+#include +#include ++#include ++#include ++#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" -+#include "dev-pb9x-pci.h" ++#include "dev-pb42-pci.h" +#include "dev-usb.h" + -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition pb92_partitions[] = { ++#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL) ++ ++#define JWAP003_GPIO_WPS 11 ++#define JWAP003_GPIO_I2C_SCL 0 ++#define JWAP003_GPIO_I2C_SDA 1 ++ ++static struct gpio_keys_button jwap003_gpio_keys[] __initdata = { + { -+ .name = "u-boot", -+ .offset = 0, -+ .size = 0x040000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "u-boot-env", -+ .offset = 0x040000, -+ .size = 0x010000, -+ } , { -+ .name = "rootfs", -+ .offset = 0x050000, -+ .size = 0x2b0000, -+ } , { -+ .name = "uImage", -+ .offset = 0x300000, -+ .size = 0x0e0000, -+ } , { -+ .name = "ART", -+ .offset = 0x3e0000, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, ++ .desc = "wps", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = JWAP003_GPIO_WPS, ++ .active_low = 1, + } +}; -+#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data pb92_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .parts = pb92_partitions, -+ .nr_parts = ARRAY_SIZE(pb92_partitions), -+#endif ++static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = { ++ .sda_pin = JWAP003_GPIO_I2C_SDA, ++ .scl_pin = JWAP003_GPIO_I2C_SCL, +}; + -+ -+#define PB92_BUTTONS_POLL_INTERVAL 20 -+ -+#define PB92_GPIO_BTN_SW4 8 -+#define PB92_GPIO_BTN_SW5 3 -+ -+static struct gpio_button pb92_gpio_buttons[] __initdata = { -+ { -+ .desc = "sw4", -+ .type = EV_KEY, -+ .code = BTN_0, -+ .threshold = 3, -+ .gpio = PB92_GPIO_BTN_SW4, -+ .active_low = 1, -+ } , { -+ .desc = "sw5", -+ .type = EV_KEY, -+ .code = BTN_1, -+ .threshold = 3, -+ .gpio = PB92_GPIO_BTN_SW5, -+ .active_low = 1, ++static struct platform_device jwap003_i2c_gpio_device = { ++ .name = "i2c-gpio", ++ .id = 0, ++ .dev = { ++ .platform_data = &jwap003_i2c_gpio_data, + } +}; + -+static void __init pb92_init(void) ++#define JWAP003_WAN_PHYMASK BIT(0) ++#define JWAP003_LAN_PHYMASK BIT(4) ++ ++static void __init jwap003_init(void) +{ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); ++ ar71xx_add_device_m25p80(NULL); + -+ ar71xx_set_mac_base(mac); -+ ar71xx_add_device_m25p80(&pb92_flash_data); ++ ar71xx_add_device_mdio(0x0); + -+ ar71xx_add_device_mdio(~0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.speed = SPEED_1000; ++ ar71xx_eth0_data.phy_mask = JWAP003_WAN_PHYMASK; ++ ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.has_ar8216 = 1; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.phy_mask = JWAP003_LAN_PHYMASK; ++ ar71xx_eth1_data.speed = SPEED_100; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + -+ ar71xx_add_device_gpio_buttons(-1, PB92_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(pb92_gpio_buttons), -+ pb92_gpio_buttons); ++ platform_device_register(&jwap003_i2c_gpio_device); + -+ pb9x_pci_init(); ++ ar71xx_add_device_usb(); ++ ++ ar71xx_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(jwap003_gpio_keys), ++ jwap003_gpio_keys); ++ ++ pb42_pci_init(); +} + -+MIPS_MACHINE(AR71XX_MACH_PB92, "PB92", "Atheros PB92", pb92_init); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-rb4xx.c linux-2.6.39/arch/mips/ar71xx/mach-rb4xx.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-rb4xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-rb4xx.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,290 @@ ++MIPS_MACHINE(AR71XX_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w04nu.c linux-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w04nu.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c 2011-08-24 02:41:55.517989552 +0200 +@@ -0,0 +1,166 @@ +/* -+ * MikroTik RouterBOARD 4xx series support ++ * Planex MZK-W04NU board support + * -+ * Copyright (C) 2008 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include -+#include -+#include -+#include -+#include ++#include ++#include + +#include -+#include + +#include "machtype.h" +#include "devices.h" ++#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" ++#include "dev-m25p80.h" +#include "dev-usb.h" + -+#define RB4XX_GPIO_USER_LED 4 -+#define RB4XX_GPIO_RESET_SWITCH 7 -+ -+#define RB4XX_BUTTONS_POLL_INTERVAL 20 -+ -+static struct gpio_led rb4xx_leds_gpio[] __initdata = { -+ { -+ .name = "rb4xx:yellow:user", -+ .gpio = RB4XX_GPIO_USER_LED, -+ .active_low = 0, -+ }, -+}; ++#define MZK_W04NU_GPIO_LED_USB 0 ++#define MZK_W04NU_GPIO_LED_STATUS 1 ++#define MZK_W04NU_GPIO_LED_WPS 3 ++#define MZK_W04NU_GPIO_LED_WLAN 6 ++#define MZK_W04NU_GPIO_LED_AP 15 ++#define MZK_W04NU_GPIO_LED_ROUTER 16 + -+static struct gpio_button rb4xx_gpio_buttons[] __initdata = { -+ { -+ .desc = "reset_switch", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = RB4XX_GPIO_RESET_SWITCH, -+ .active_low = 1, -+ } -+}; ++#define MZK_W04NU_GPIO_BTN_APROUTER 5 ++#define MZK_W04NU_GPIO_BTN_WPS 12 ++#define MZK_W04NU_GPIO_BTN_RESET 21 + -+static struct platform_device rb4xx_nand_device = { -+ .name = "rb4xx-nand", -+ .id = -1, -+}; ++#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL) + -+static struct ar71xx_pci_irq rb4xx_pci_irqs[] __initdata = { ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition mzk_w04nu_partitions[] = { + { -+ .slot = 0, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV2, ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, + }, { -+ .slot = 1, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV0, ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, + }, { -+ .slot = 1, -+ .pin = 2, -+ .irq = AR71XX_PCI_IRQ_DEV1, ++ .name = "kernel", ++ .offset = 0x050000, ++ .size = 0x160000, + }, { -+ .slot = 2, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV1, ++ .name = "rootfs", ++ .offset = 0x1b0000, ++ .size = 0x630000, + }, { -+ .slot = 3, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV2, ++ .name = "art", ++ .offset = 0x7e0000, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x050000, ++ .size = 0x790000, + } +}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+#if 0 -+/* -+ * SPI device support is experimental -+ */ -+static struct flash_platform_data rb4xx_flash_data = { -+ .type = "pm25lv512", ++static struct flash_platform_data mzk_w04nu_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = mzk_w04nu_partitions, ++ .nr_parts = ARRAY_SIZE(mzk_w04nu_partitions), ++#endif +}; + -+static struct spi_board_info rb4xx_spi_info[] = { ++static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = { + { -+ .bus_num = 0, -+ .chip_select = 0, -+ .max_speed_hz = 25000000, -+ .modalias = "m25p80", -+ .platform_data = &rb4xx_flash_data, ++ .name = "mzk-w04nu:green:status", ++ .gpio = MZK_W04NU_GPIO_LED_STATUS, ++ .active_low = 1, ++ }, { ++ .name = "mzk-w04nu:blue:wps", ++ .gpio = MZK_W04NU_GPIO_LED_WPS, ++ .active_low = 1, ++ }, { ++ .name = "mzk-w04nu:green:wlan", ++ .gpio = MZK_W04NU_GPIO_LED_WLAN, ++ .active_low = 1, ++ }, { ++ .name = "mzk-w04nu:green:usb", ++ .gpio = MZK_W04NU_GPIO_LED_USB, ++ .active_low = 1, ++ }, { ++ .name = "mzk-w04nu:green:ap", ++ .gpio = MZK_W04NU_GPIO_LED_AP, ++ .active_low = 1, ++ }, { ++ .name = "mzk-w04nu:green:router", ++ .gpio = MZK_W04NU_GPIO_LED_ROUTER, ++ .active_low = 1, + } +}; + -+static struct mmc_spi_platform_data rb433_mmc_data = { -+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, -+}; -+ -+static struct spi_board_info rb433_spi_info[] = { ++static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = { + { -+ .bus_num = 0, -+ .chip_select = 0, -+ .max_speed_hz = 25000000, -+ .modalias = "m25p80", -+ .platform_data = &rb433_flash_data, ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = MZK_W04NU_GPIO_BTN_RESET, ++ .active_low = 1, + }, { -+ .bus_num = 0, -+ .chip_select = 2, -+ .max_speed_hz = 25000000, -+ .modalias = "mmc_spi", -+ .platform_data = &rb433_mmc_data, -+ } -+}; -+ -+static u32 rb433_spi_get_ioc_base(u8 chip_select, int cs_high, int is_on) -+{ -+ u32 ret; -+ -+ if (is_on == AR71XX_SPI_CS_INACTIVE) { -+ ret = SPI_IOC_CS0 | SPI_IOC_CS1; -+ } else { -+ if (cs_high) { -+ ret = SPI_IOC_CS0 | SPI_IOC_CS1; -+ } else { -+ if ((chip_select ^ 2) == 0) -+ ret = SPI_IOC_CS1 ^ (SPI_IOC_CS0 | SPI_IOC_CS1); -+ else -+ ret = SPI_IOC_CS0 ^ (SPI_IOC_CS0 | SPI_IOC_CS1); -+ } ++ .desc = "wps", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = MZK_W04NU_GPIO_BTN_WPS, ++ .active_low = 1, ++ }, { ++ .desc = "aprouter", ++ .type = EV_KEY, ++ .code = BTN_2, ++ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = MZK_W04NU_GPIO_BTN_APROUTER, ++ .active_low = 0, + } -+ -+ return ret; -+} -+ -+struct ar71xx_spi_platform_data rb433_spi_data = { -+ .bus_num = 0, -+ .num_chipselect = 3, -+ .get_ioc_base = rb433_spi_get_ioc_base, +}; + -+static void rb4xx_add_device_spi(void) -+{ -+ ar71xx_add_device_spi(NULL, rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); -+} -+ -+static void rb433_add_device_spi(void) -+{ -+ ar71xx_add_device_spi(&rb433_spi_data, rb433_spi_info, -+ ARRAY_SIZE(rb433_spi_info)); -+} -+#else -+static inline void rb4xx_add_device_spi(void) {} -+static inline void rb433_add_device_spi(void) {} -+#endif -+ -+static void __init rb4xx_generic_setup(void) -+{ -+ ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | -+ AR71XX_GPIO_FUNC_SPI_CS2_EN); -+ -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), -+ rb4xx_leds_gpio); -+ -+ ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(rb4xx_gpio_buttons), -+ rb4xx_gpio_buttons); -+ -+ platform_device_register(&rb4xx_nand_device); -+} -+ -+static void __init rb411_setup(void) -+{ -+ rb4xx_generic_setup(); -+ rb4xx_add_device_spi(); -+ -+ ar71xx_add_device_mdio(0xfffffffc); -+ -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ar71xx_eth0_data.phy_mask = 0x00000003; -+ -+ ar71xx_add_device_eth(0); -+ -+ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); -+} -+ -+MIPS_MACHINE(AR71XX_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH", -+ rb411_setup); -+ -+static void __init rb411u_setup(void) -+{ -+ rb411_setup(); -+ ar71xx_add_device_usb(); -+} -+ -+MIPS_MACHINE(AR71XX_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U", -+ rb411u_setup); ++#define MZK_W04NU_WAN_PHYMASK BIT(4) ++#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK) + -+static void __init rb433_setup(void) ++static void __init mzk_w04nu_setup(void) +{ -+ rb4xx_generic_setup(); -+ rb433_add_device_spi(); ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + -+ ar71xx_add_device_mdio(0xffffffe9); ++ ar71xx_add_device_mdio(MZK_W04NU_MDIO_MASK); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.has_ar8216 = 1; + ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = 0x00000010; ++ ar71xx_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK; + -+ ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); -+} ++ ar71xx_add_device_m25p80(&mzk_w04nu_flash_data); + -+MIPS_MACHINE(AR71XX_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH", -+ rb433_setup); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio), ++ mzk_w04nu_leds_gpio); + -+static void __init rb433u_setup(void) -+{ -+ rb433_setup(); ++ ar71xx_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(mzk_w04nu_gpio_keys), ++ mzk_w04nu_gpio_keys); + ar71xx_add_device_usb(); ++ ++ ar9xxx_add_device_wmac(eeprom, NULL); +} + -+MIPS_MACHINE(AR71XX_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH", -+ rb433u_setup); ++MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU", ++ mzk_w04nu_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w300nh.c linux-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w300nh.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c 2011-08-24 02:41:55.527982711 +0200 +@@ -0,0 +1,159 @@ ++/* ++ * Planex MZK-W300NH board support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+static void __init rb450_generic_setup(int gige) -+{ -+ rb4xx_generic_setup(); -+ rb4xx_add_device_spi(); ++#include ++#include + -+ ar71xx_add_device_mdio(0xffffffe0); ++#include + -+ ar71xx_eth0_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII; -+ ar71xx_eth0_data.phy_mask = (gige) ? (1 << 0) : 0; -+ ar71xx_eth0_data.speed = (gige) ? SPEED_1000 : SPEED_100; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++#include "machtype.h" ++#include "devices.h" ++#include "dev-m25p80.h" ++#include "dev-ar9xxx-wmac.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" + -+ ar71xx_eth1_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = 0x00000010; ++#define MZK_W300NH_GPIO_LED_STATUS 1 ++#define MZK_W300NH_GPIO_LED_WPS 3 ++#define MZK_W300NH_GPIO_LED_WLAN 6 ++#define MZK_W300NH_GPIO_LED_AP 15 ++#define MZK_W300NH_GPIO_LED_ROUTER 16 + -+ ar71xx_add_device_eth(1); -+ ar71xx_add_device_eth(0); -+} ++#define MZK_W300NH_GPIO_BTN_APROUTER 5 ++#define MZK_W300NH_GPIO_BTN_WPS 12 ++#define MZK_W300NH_GPIO_BTN_RESET 21 + -+static void __init rb450_setup(void) -+{ -+ rb450_generic_setup(0); -+} ++#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL) + -+MIPS_MACHINE(AR71XX_MACH_RB_450, "450", "MikroTik RouterBOARD 450", -+ rb450_setup); -+ -+static void __init rb450g_setup(void) -+{ -+ rb450_generic_setup(1); -+} -+ -+MIPS_MACHINE(AR71XX_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G", -+ rb450g_setup); -+ -+static void __init rb493_setup(void) -+{ -+ rb4xx_generic_setup(); -+ rb4xx_add_device_spi(); -+ -+ ar71xx_add_device_mdio(0x3fffff00); -+ -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ar71xx_eth0_data.speed = SPEED_100; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = 0x00000001; -+ -+ ar71xx_add_device_eth(0); -+ ar71xx_add_device_eth(1); -+ -+ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); -+} -+ -+MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH", -+ rb493_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-rb750.c linux-2.6.39/arch/mips/ar71xx/mach-rb750.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-rb750.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-rb750.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,133 @@ -+/* -+ * MikroTik RouterBOARD 750 support -+ * -+ * Copyright (C) 2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition mzk_w300nh_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, ++ }, { ++ .name = "kernel", ++ .offset = 0x050000, ++ .size = 0x160000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x1b0000, ++ .size = 0x630000, ++ }, { ++ .name = "art", ++ .offset = 0x7e0000, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x050000, ++ .size = 0x790000, ++ } ++}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+#include "machtype.h" -+#include "dev-ap91-eth.h" ++static struct flash_platform_data mzk_w300nh_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = mzk_w300nh_partitions, ++ .nr_parts = ARRAY_SIZE(mzk_w300nh_partitions), ++#endif ++}; + -+static struct rb750_led_data rb750_leds[] = { ++static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = { + { -+ .name = "rb750:green:act", -+ .mask = RB750_LED_ACT, -+ .active_low = 1, -+ }, { -+ .name = "rb750:green:port1", -+ .mask = RB750_LED_PORT5, ++ .name = "mzk-w300nh:green:status", ++ .gpio = MZK_W300NH_GPIO_LED_STATUS, + .active_low = 1, + }, { -+ .name = "rb750:green:port2", -+ .mask = RB750_LED_PORT4, ++ .name = "mzk-w300nh:blue:wps", ++ .gpio = MZK_W300NH_GPIO_LED_WPS, + .active_low = 1, + }, { -+ .name = "rb750:green:port3", -+ .mask = RB750_LED_PORT3, ++ .name = "mzk-w300nh:green:wlan", ++ .gpio = MZK_W300NH_GPIO_LED_WLAN, + .active_low = 1, + }, { -+ .name = "rb750:green:port4", -+ .mask = RB750_LED_PORT2, ++ .name = "mzk-w300nh:green:ap", ++ .gpio = MZK_W300NH_GPIO_LED_AP, + .active_low = 1, + }, { -+ .name = "rb750:green:port5", -+ .mask = RB750_LED_PORT1, ++ .name = "mzk-w300nh:green:router", ++ .gpio = MZK_W300NH_GPIO_LED_ROUTER, + .active_low = 1, + } +}; + -+static struct rb750_led_platform_data rb750_leds_data = { -+ .num_leds = ARRAY_SIZE(rb750_leds), -+ .leds = rb750_leds, -+}; -+ -+static struct platform_device rb750_leds_device = { -+ .name = "leds-rb750", -+ .dev = { -+ .platform_data = &rb750_leds_data, ++static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = MZK_W300NH_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, { ++ .desc = "wps", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = MZK_W300NH_GPIO_BTN_WPS, ++ .active_low = 1, ++ }, { ++ .desc = "aprouter", ++ .type = EV_KEY, ++ .code = BTN_2, ++ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = MZK_W300NH_GPIO_BTN_APROUTER, ++ .active_low = 0, + } +}; + -+static const char *rb750_port_names[AP91_ETH_NUM_PORT_NAMES] __initdata = { -+ "port5", -+ "port4", -+ "port3", -+ "port2", -+}; -+ -+static struct platform_device rb750_nand_device = { -+ .name = "rb750-nand", -+ .id = -1, -+}; ++#define MZK_W300NH_WAN_PHYMASK BIT(4) ++#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK) + -+int rb750_latch_change(u32 mask_clr, u32 mask_set) ++static void __init mzk_w300nh_setup(void) +{ -+ static DEFINE_SPINLOCK(lock); -+ static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE; -+ static u32 latch_oe; -+ static u32 latch_clr; -+ unsigned long flags; -+ u32 t; -+ int ret = 0; -+ -+ spin_lock_irqsave(&lock, flags); -+ -+ if ((mask_clr & BIT(31)) != 0 && -+ (latch_set & RB750_LVC573_LE) == 0) { -+ goto unlock; -+ } -+ -+ latch_set = (latch_set | mask_set) & ~mask_clr; -+ latch_clr = (latch_clr | mask_clr) & ~mask_set; -+ -+ if (latch_oe == 0) -+ latch_oe = __raw_readl(ar71xx_gpio_base + GPIO_REG_OE); -+ -+ if (likely(latch_set & RB750_LVC573_LE)) { -+ void __iomem *base = ar71xx_gpio_base; ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + -+ t = __raw_readl(base + GPIO_REG_OE); -+ t |= mask_clr | latch_oe | mask_set; ++ ar71xx_add_device_mdio(MZK_W300NH_MDIO_MASK); + -+ __raw_writel(t, base + GPIO_REG_OE); -+ __raw_writel(latch_clr, base + GPIO_REG_CLEAR); -+ __raw_writel(latch_set, base + GPIO_REG_SET); -+ } else if (mask_clr & RB750_LVC573_LE) { -+ void __iomem *base = ar71xx_gpio_base; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.has_ar8216 = 1; + -+ latch_oe = __raw_readl(base + GPIO_REG_OE); -+ __raw_writel(RB750_LVC573_LE, base + GPIO_REG_CLEAR); -+ /* flush write */ -+ __raw_readl(base + GPIO_REG_CLEAR); -+ } ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK; + -+ ret = 1; ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+ unlock: -+ spin_unlock_irqrestore(&lock, flags); -+ return ret; -+} -+EXPORT_SYMBOL_GPL(rb750_latch_change); ++ ar71xx_add_device_m25p80(&mzk_w300nh_flash_data); + -+static void __init rb750_setup(void) -+{ -+ ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | -+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | -+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | -+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | -+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio), ++ mzk_w300nh_leds_gpio); + -+ ap91_eth_init(NULL, rb750_port_names); -+ platform_device_register(&rb750_leds_device); -+ platform_device_register(&rb750_nand_device); ++ ar71xx_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(mzk_w300nh_gpio_keys), ++ mzk_w300nh_gpio_keys); ++ ar9xxx_add_device_wmac(eeprom, NULL); +} + -+MIPS_MACHINE(AR71XX_MACH_RB_750, "750i", "MikroTik RouterBOARD 750", -+ rb750_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tew-632brp.c linux-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-tew-632brp.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,149 @@ ++MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH", ++ mzk_w300nh_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-nbg460n.c linux-2.6.39/arch/mips/ar71xx/mach-nbg460n.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-nbg460n.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-nbg460n.c 2011-08-24 02:41:55.537990605 +0200 +@@ -0,0 +1,225 @@ +/* -+ * TrendNET TEW-632BRP board support ++ * Zyxel NBG 460N/550N/550NH board support + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2010 Michael Kurz ++ * ++ * based on mach-tl-wr1043nd.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + ++#include +#include +#include ++#include ++#include ++ ++#include ++#include ++#include + +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-ar913x-wmac.h" ++#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" -+#include "nvram.h" + -+#define TEW_632BRP_GPIO_LED_STATUS 1 -+#define TEW_632BRP_GPIO_LED_WPS 3 -+#define TEW_632BRP_GPIO_LED_WLAN 6 -+#define TEW_632BRP_GPIO_BTN_WPS 12 -+#define TEW_632BRP_GPIO_BTN_RESET 21 ++/* LEDs */ ++#define NBG460N_GPIO_LED_WPS 3 ++#define NBG460N_GPIO_LED_WAN 6 ++#define NBG460N_GPIO_LED_POWER 14 ++#define NBG460N_GPIO_LED_WLAN 15 ++ ++/* Buttons */ ++#define NBG460N_GPIO_BTN_WPS 12 ++#define NBG460N_GPIO_BTN_RESET 21 + -+#define TEW_632BRP_BUTTONS_POLL_INTERVAL 20 ++#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL) + -+#define TEW_632BRP_CONFIG_ADDR 0x1f020000 -+#define TEW_632BRP_CONFIG_SIZE 0x10000 ++/* RTC chip PCF8563 I2C interface */ ++#define NBG460N_GPIO_PCF8563_SDA 8 ++#define NBG460N_GPIO_PCF8563_SCK 7 ++ ++/* Switch configuration I2C interface */ ++#define NBG460N_GPIO_RTL8366_SDA 16 ++#define NBG460N_GPIO_RTL8366_SCK 18 + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition tew_632brp_partitions[] = { ++static struct mtd_partition nbg460n_partitions[] = { + { -+ .name = "u-boot", ++ .name = "Bootbase", + .offset = 0, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "config", -+ .offset = 0x020000, + .size = 0x010000, -+ } , { -+ .name = "kernel", -+ .offset = 0x030000, -+ .size = 0x0d0000, -+ } , { ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "U-Boot Config", ++ .offset = 0x010000, ++ .size = 0x030000, ++ }, { ++ .name = "U-Boot", ++ .offset = 0x040000, ++ .size = 0x030000, ++ }, { ++ .name = "linux", ++ .offset = 0x070000, ++ .size = 0x0e0000, ++ }, { + .name = "rootfs", -+ .offset = 0x100000, -+ .size = 0x2f0000, -+ } , { -+ .name = "art", ++ .offset = 0x150000, ++ .size = 0x2a0000, ++ }, { ++ .name = "CalibData", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, -+ } , { ++ }, { + .name = "firmware", -+ .offset = 0x030000, -+ .size = 0x3c0000, ++ .offset = 0x070000, ++ .size = 0x380000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data tew_632brp_flash_data = { ++static struct flash_platform_data nbg460n_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = tew_632brp_partitions, -+ .nr_parts = ARRAY_SIZE(tew_632brp_partitions), ++ .parts = nbg460n_partitions, ++ .nr_parts = ARRAY_SIZE(nbg460n_partitions), +#endif +}; + -+static struct gpio_led tew_632brp_leds_gpio[] __initdata = { ++static struct gpio_led nbg460n_leds_gpio[] __initdata = { + { -+ .name = "tew-632brp:green:status", -+ .gpio = TEW_632BRP_GPIO_LED_STATUS, -+ .active_low = 1, ++ .name = "nbg460n:green:power", ++ .gpio = NBG460N_GPIO_LED_POWER, ++ .active_low = 0, ++ .default_trigger = "default-on", + }, { -+ .name = "tew-632brp:blue:wps", -+ .gpio = TEW_632BRP_GPIO_LED_WPS, -+ .active_low = 1, ++ .name = "nbg460n:green:wps", ++ .gpio = NBG460N_GPIO_LED_WPS, ++ .active_low = 0, + }, { -+ .name = "tew-632brp:green:wlan", -+ .gpio = TEW_632BRP_GPIO_LED_WLAN, -+ .active_low = 1, ++ .name = "nbg460n:green:wlan", ++ .gpio = NBG460N_GPIO_LED_WLAN, ++ .active_low = 0, ++ }, { ++ /* Not really for controlling the LED, ++ when set low the LED blinks uncontrollable */ ++ .name = "nbg460n:green:wan", ++ .gpio = NBG460N_GPIO_LED_WAN, ++ .active_low = 0, + } +}; + -+static struct gpio_button tew_632brp_gpio_buttons[] __initdata = { ++static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = TEW_632BRP_GPIO_BTN_RESET, ++ .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = NBG460N_GPIO_BTN_RESET, ++ .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = TEW_632BRP_GPIO_BTN_WPS, ++ .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = NBG460N_GPIO_BTN_WPS, ++ .active_low = 1, + } +}; + -+#define TEW_632BRP_LAN_PHYMASK BIT(0) -+#define TEW_632BRP_WAN_PHYMASK BIT(4) -+#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \ -+ TEW_632BRP_WAN_PHYMASK)) ++static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = { ++ .sda_pin = NBG460N_GPIO_PCF8563_SDA, ++ .scl_pin = NBG460N_GPIO_PCF8563_SCK, ++ .udelay = 10, ++}; + -+static void __init tew_632brp_setup(void) ++static struct platform_device nbg460n_i2c_device = { ++ .name = "i2c-gpio", ++ .id = -1, ++ .num_resources = 0, ++ .resource = NULL, ++ .dev = { ++ .platform_data = &nbg460n_i2c_device_platdata, ++ }, ++}; ++ ++static struct i2c_board_info nbg460n_i2c_devs[] __initdata = { ++ { ++ I2C_BOARD_INFO("pcf8563", 0x51), ++ }, ++}; ++ ++static void __devinit nbg460n_i2c_init(void) +{ -+ const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR); -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); -+ u8 mac[6]; -+ u8 *wlan_mac = NULL; ++ /* The gpio interface */ ++ platform_device_register(&nbg460n_i2c_device); ++ /* I2C devices */ ++ i2c_register_board_info(0, nbg460n_i2c_devs, ++ ARRAY_SIZE(nbg460n_i2c_devs)); ++} + -+ if (nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE, -+ "lan_mac=", mac) == 0) { -+ ar71xx_set_mac_base(mac); -+ wlan_mac = mac; ++ ++static struct rtl8366_platform_data nbg460n_rtl8366s_data = { ++ .gpio_sda = NBG460N_GPIO_RTL8366_SDA, ++ .gpio_sck = NBG460N_GPIO_RTL8366_SCK, ++}; ++ ++static struct platform_device nbg460n_rtl8366s_device = { ++ .name = RTL8366S_DRIVER_NAME, ++ .id = -1, ++ .dev = { ++ .platform_data = &nbg460n_rtl8366s_data, + } ++}; + -+ ar71xx_add_device_mdio(TEW_632BRP_MDIO_MASK); ++static void __init nbg460n_setup(void) ++{ ++ /* end of bootloader sector contains mac address */ ++ u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8); ++ /* last sector contains wlan calib data */ ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK; ++ /* LAN Port */ ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.speed = SPEED_1000; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; + -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK; ++ /* WAN Port */ ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); ++ ar71xx_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev; ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.phy_mask = 0x10; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + -+ ar71xx_add_device_m25p80(&tew_632brp_flash_data); ++ /* register the switch phy */ ++ platform_device_register(&nbg460n_rtl8366s_device); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio), -+ tew_632brp_leds_gpio); ++ /* register flash */ ++ ar71xx_add_device_m25p80(&nbg460n_flash_data); ++ ++ ar9xxx_add_device_wmac(eeprom, mac); ++ ++ /* register RTC chip */ ++ nbg460n_i2c_init(); + -+ ar71xx_add_device_gpio_buttons(-1, TEW_632BRP_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(tew_632brp_gpio_buttons), -+ tew_632brp_gpio_buttons); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio), ++ nbg460n_leds_gpio); + -+ ar913x_add_device_wmac(eeprom, wlan_mac); ++ ar71xx_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(nbg460n_gpio_keys), ++ nbg460n_gpio_keys); +} + -+MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP", -+ tew_632brp_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr1043nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr1043nd.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,156 @@ ++MIPS_MACHINE(AR71XX_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH", ++ nbg460n_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb42.c linux-2.6.39/arch/mips/ar71xx/mach-pb42.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-pb42.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-pb42.c 2011-08-24 02:41:55.537990605 +0200 +@@ -0,0 +1,74 @@ +/* -+ * TP-LINK TL-WR1043ND board support ++ * Atheros PB42 board support + * -+ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include -+#include -+#include +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-ar913x-wmac.h" +#include "dev-gpio-buttons.h" -+#include "dev-leds-gpio.h" ++#include "dev-pb42-pci.h" +#include "dev-usb.h" + -+#define TL_WR1043ND_GPIO_LED_USB 1 -+#define TL_WR1043ND_GPIO_LED_SYSTEM 2 -+#define TL_WR1043ND_GPIO_LED_QSS 5 -+#define TL_WR1043ND_GPIO_LED_WLAN 9 -+ -+#define TL_WR1043ND_GPIO_BTN_RESET 3 -+#define TL_WR1043ND_GPIO_BTN_QSS 7 -+ -+#define TL_WR1043ND_GPIO_RTL8366_SDA 18 -+#define TL_WR1043ND_GPIO_RTL8366_SCK 19 -+ -+#define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20 -+ -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition tl_wr1043nd_partitions[] = { -+ { -+ .name = "u-boot", -+ .offset = 0, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "kernel", -+ .offset = 0x020000, -+ .size = 0x140000, -+ } , { -+ .name = "rootfs", -+ .offset = 0x160000, -+ .size = 0x690000, -+ } , { -+ .name = "art", -+ .offset = 0x7f0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "firmware", -+ .offset = 0x020000, -+ .size = 0x7d0000, -+ } -+}; -+#endif /* CONFIG_MTD_PARTITIONS */ -+ -+static struct flash_platform_data tl_wr1043nd_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .parts = tl_wr1043nd_partitions, -+ .nr_parts = ARRAY_SIZE(tl_wr1043nd_partitions), -+#endif -+}; ++#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL) + -+static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { -+ { -+ .name = "tl-wr1043nd:green:usb", -+ .gpio = TL_WR1043ND_GPIO_LED_USB, -+ .active_low = 1, -+ }, { -+ .name = "tl-wr1043nd:green:system", -+ .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, -+ .active_low = 1, -+ }, { -+ .name = "tl-wr1043nd:green:qss", -+ .gpio = TL_WR1043ND_GPIO_LED_QSS, -+ .active_low = 0, -+ }, { -+ .name = "tl-wr1043nd:green:wlan", -+ .gpio = TL_WR1043ND_GPIO_LED_WLAN, -+ .active_low = 1, -+ } -+}; ++#define PB42_GPIO_BTN_SW4 8 ++#define PB42_GPIO_BTN_SW5 3 + -+static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = { ++static struct gpio_keys_button pb42_gpio_keys[] __initdata = { + { -+ .desc = "reset", ++ .desc = "sw4", + .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = TL_WR1043ND_GPIO_BTN_RESET, ++ .code = BTN_0, ++ .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = PB42_GPIO_BTN_SW4, + .active_low = 1, + }, { -+ .desc = "qss", ++ .desc = "sw5", + .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = TL_WR1043ND_GPIO_BTN_QSS, ++ .code = BTN_1, ++ .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = PB42_GPIO_BTN_SW5, + .active_low = 1, + } +}; + -+static struct rtl8366rb_platform_data tl_wr1043nd_rtl8366rb_data = { -+ .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA, -+ .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK, -+}; -+ -+static struct platform_device tl_wr1043nd_rtl8366rb_device = { -+ .name = RTL8366RB_DRIVER_NAME, -+ .id = -1, -+ .dev = { -+ .platform_data = &tl_wr1043nd_rtl8366rb_data, -+ } -+}; ++#define PB42_WAN_PHYMASK BIT(20) ++#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) ++#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK) + -+static void __init tl_wr1043nd_setup(void) ++static void __init pb42_init(void) +{ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ ar71xx_add_device_m25p80(NULL); + -+ ar71xx_set_mac_base(mac); ++ ar71xx_add_device_mdio(~PB42_MDIO_PHYMASK); + -+ ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev; -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth0_data.speed = SPEED_1000; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ ar71xx_eth0_pll_data.pll_1000 = 0x1a000000; -+ -+ ar71xx_add_device_eth(0); -+ -+ ar71xx_add_device_usb(); -+ -+ ar71xx_add_device_m25p80(&tl_wr1043nd_flash_data); ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_eth0_data.phy_mask = PB42_WAN_PHYMASK; + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), -+ tl_wr1043nd_leds_gpio); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.speed = SPEED_100; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; + -+ platform_device_register(&tl_wr1043nd_rtl8366rb_device); ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+ ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(tl_wr1043nd_gpio_buttons), -+ tl_wr1043nd_gpio_buttons); ++ ar71xx_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(pb42_gpio_keys), ++ pb42_gpio_keys); + -+ ar913x_add_device_wmac(eeprom, mac); ++ pb42_pci_init(); +} + -+MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND", -+ tl_wr1043nd_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr741nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr741nd.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,115 @@ ++MIPS_MACHINE(AR71XX_MACH_PB42, "PB42", "Atheros PB42", pb42_init); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb44.c linux-2.6.39/arch/mips/ar71xx/mach-pb44.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-pb44.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-pb44.c 2011-08-24 02:41:55.537990605 +0200 +@@ -0,0 +1,213 @@ +/* -+ * TP-LINK TL-WR741ND board support ++ * Atheros PB44 board support + * -+ * Copyright (C) 2009-2010 Gabor Juhos ++ * Copyright (C) 2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + +#include + +#include "machtype.h" +#include "devices.h" -+#include "dev-m25p80.h" -+#include "dev-ap91-eth.h" -+#include "dev-ap91-pci.h" ++#include "dev-pb42-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" ++#include "dev-usb.h" + -+#define TL_WR741ND_GPIO_LED_QSS 0 -+#define TL_WR741ND_GPIO_LED_SYSTEM 1 ++#define PB44_PCF8757_VSC7395_CS 0 ++#define PB44_PCF8757_STEREO_CS 1 ++#define PB44_PCF8757_SLIC_CS0 2 ++#define PB44_PCF8757_SLIC_TEST 3 ++#define PB44_PCF8757_SLIC_INT0 4 ++#define PB44_PCF8757_SLIC_INT1 5 ++#define PB44_PCF8757_SW_RESET 6 ++#define PB44_PCF8757_SW_JUMP 8 ++#define PB44_PCF8757_LED_JUMP1 9 ++#define PB44_PCF8757_LED_JUMP2 10 ++#define PB44_PCF8757_TP24 11 ++#define PB44_PCF8757_TP25 12 ++#define PB44_PCF8757_TP26 13 ++#define PB44_PCF8757_TP27 14 ++#define PB44_PCF8757_TP28 15 + -+#define TL_WR741ND_GPIO_BTN_RESET 11 -+#define TL_WR741ND_GPIO_BTN_QSS 12 ++#define PB44_GPIO_I2C_SCL 0 ++#define PB44_GPIO_I2C_SDA 1 + -+#define TL_WR741ND_BUTTONS_POLL_INTERVAL 20 ++#define PB44_GPIO_EXP_BASE 16 ++#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS) ++#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_RESET) ++#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_JUMP) ++#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP1) ++#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP2) + -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition tl_wr741nd_partitions[] = { -+ { -+ .name = "u-boot", -+ .offset = 0, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "kernel", -+ .offset = 0x020000, -+ .size = 0x140000, -+ } , { -+ .name = "rootfs", -+ .offset = 0x160000, -+ .size = 0x290000, -+ } , { -+ .name = "art", -+ .offset = 0x3f0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "firmware", -+ .offset = 0x020000, -+ .size = 0x3d0000, ++#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL) ++ ++static struct i2c_gpio_platform_data pb44_i2c_gpio_data = { ++ .sda_pin = PB44_GPIO_I2C_SDA, ++ .scl_pin = PB44_GPIO_I2C_SCL, ++}; ++ ++static struct platform_device pb44_i2c_gpio_device = { ++ .name = "i2c-gpio", ++ .id = 0, ++ .dev = { ++ .platform_data = &pb44_i2c_gpio_data, + } +}; -+#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data tl_wr741nd_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .parts = tl_wr741nd_partitions, -+ .nr_parts = ARRAY_SIZE(tl_wr741nd_partitions), -+#endif ++static struct pcf857x_platform_data pb44_pcf857x_data = { ++ .gpio_base = PB44_GPIO_EXP_BASE, +}; + -+static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = { ++static struct i2c_board_info pb44_i2c_board_info[] __initdata = { + { -+ .name = "tl-wr741nd:green:system", -+ .gpio = TL_WR741ND_GPIO_LED_SYSTEM, ++ I2C_BOARD_INFO("pcf8575", 0x20), ++ .platform_data = &pb44_pcf857x_data, ++ }, ++}; ++ ++static struct gpio_led pb44_leds_gpio[] __initdata = { ++ { ++ .name = "pb44:amber:jump1", ++ .gpio = PB44_GPIO_LED_JUMP1, + .active_low = 1, + }, { -+ .name = "tl-wr741nd:green:qss", -+ .gpio = TL_WR741ND_GPIO_LED_QSS, ++ .name = "pb44:green:jump2", ++ .gpio = PB44_GPIO_LED_JUMP2, + .active_low = 1, -+ } ++ }, +}; + -+static struct gpio_button tl_wr741nd_gpio_buttons[] __initdata = { ++static struct gpio_keys_button pb44_gpio_keys[] __initdata = { + { -+ .desc = "reset", ++ .desc = "soft_reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = TL_WR741ND_GPIO_BTN_RESET, ++ .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = PB44_GPIO_SW_RESET, + .active_low = 1, + }, { -+ .desc = "qss", ++ .desc = "jumpstart", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = TL_WR741ND_GPIO_BTN_QSS, ++ .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = PB44_GPIO_SW_JUMP, + .active_low = 1, + } +}; + -+static void __init tl_wr741nd_setup(void) ++static void pb44_vsc7395_reset(void) +{ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ ar71xx_device_stop(RESET_MODULE_GE1_PHY); ++ udelay(10); ++ ar71xx_device_start(RESET_MODULE_GE1_PHY); ++ mdelay(50); ++} + -+ ar71xx_add_device_m25p80(&tl_wr741nd_flash_data); ++static struct vsc7385_platform_data pb44_vsc7395_data = { ++ .reset = pb44_vsc7395_reset, ++ .ucode_name = "vsc7395_ucode_pb44.bin", ++ .mac_cfg = { ++ .tx_ipg = 6, ++ .bit2 = 1, ++ .clk_sel = 0, ++ }, ++}; + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio), -+ tl_wr741nd_leds_gpio); ++static struct spi_board_info pb44_spi_info[] = { ++ { ++ .bus_num = 0, ++ .chip_select = 0, ++ .max_speed_hz = 25000000, ++ .modalias = "m25p80", ++ }, { ++ .bus_num = 0, ++ .chip_select = 1, ++ .max_speed_hz = 25000000, ++ .modalias = "spi-vsc7385", ++ .platform_data = &pb44_vsc7395_data, ++ .controller_data = (void *) PB44_GPIO_VSC7395_CS, ++ }, ++}; ++ ++static struct resource pb44_spi_resources[] = { ++ [0] = { ++ .start = AR71XX_SPI_BASE, ++ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; + -+ ar71xx_add_device_gpio_buttons(-1, TL_WR741ND_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(tl_wr741nd_gpio_buttons), -+ tl_wr741nd_gpio_buttons); ++static struct ar71xx_spi_platform_data pb44_spi_data = { ++ .bus_num = 0, ++ .num_chipselect = 2, ++}; + -+ ap91_eth_init(mac, NULL); -+ ap91_pci_init(ee, mac); ++static struct platform_device pb44_spi_device = { ++ .name = "pb44-spi", ++ .id = -1, ++ .resource = pb44_spi_resources, ++ .num_resources = ARRAY_SIZE(pb44_spi_resources), ++ .dev = { ++ .platform_data = &pb44_spi_data, ++ }, ++}; ++ ++#define PB44_WAN_PHYMASK BIT(0) ++#define PB44_LAN_PHYMASK 0 ++#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK) ++ ++static void __init pb44_init(void) ++{ ++ ar71xx_add_device_mdio(~PB44_MDIO_PHYMASK); ++ ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.phy_mask = PB44_WAN_PHYMASK; ++ ++ ar71xx_add_device_eth(0); ++ ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ar71xx_eth1_pll_data.pll_1000 = 0x110000; ++ ++ ar71xx_add_device_eth(1); ++ ++ ar71xx_add_device_usb(); ++ ++ pb42_pci_init(); ++ ++ i2c_register_board_info(0, pb44_i2c_board_info, ++ ARRAY_SIZE(pb44_i2c_board_info)); ++ ++ platform_device_register(&pb44_i2c_gpio_device); ++ ++ spi_register_board_info(pb44_spi_info, ARRAY_SIZE(pb44_spi_info)); ++ platform_device_register(&pb44_spi_device); ++ ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio), ++ pb44_leds_gpio); ++ ++ ar71xx_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(pb44_gpio_keys), ++ pb44_gpio_keys); +} -+MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND", -+ tl_wr741nd_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr841n.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr841n.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,143 @@ ++ ++MIPS_MACHINE(AR71XX_MACH_PB44, "PB44", "Atheros PB44", pb44_init); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb92.c linux-2.6.39/arch/mips/ar71xx/mach-pb92.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-pb92.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-pb92.c 2011-08-24 02:41:55.567991163 +0200 +@@ -0,0 +1,105 @@ +/* -+ * TP-LINK TL-WR841N board support ++ * Atheros PB92 board support + * -+ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2010 Felix Fietkau ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -5755,577 +6205,453 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr841n.c linux-2.6.39/arch/ + +#include +#include -+ +#include + +#include "machtype.h" +#include "devices.h" -+#include "dev-dsa.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" -+#include "dev-pb42-pci.h" -+#include "dev-leds-gpio.h" -+ -+#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2 -+#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4 -+#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5 -+ -+#define TL_WR841ND_V1_GPIO_BTN_RESET 3 -+#define TL_WR841ND_V1_GPIO_BTN_QSS 7 -+ -+#define TL_WR841ND_V1_BUTTONS_POLL_INTERVAL 20 ++#include "dev-pb9x-pci.h" ++#include "dev-usb.h" + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition tl_wr841n_v1_partitions[] = { ++static struct mtd_partition pb92_partitions[] = { + { -+ .name = "redboot", ++ .name = "u-boot", + .offset = 0, -+ .size = 0x020000, ++ .size = 0x040000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "kernel", -+ .offset = 0x020000, -+ .size = 0x140000, -+ } , { ++ }, { ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, ++ }, { + .name = "rootfs", -+ .offset = 0x160000, -+ .size = 0x280000, -+ } , { -+ .name = "config", ++ .offset = 0x050000, ++ .size = 0x2b0000, ++ }, { ++ .name = "uImage", ++ .offset = 0x300000, ++ .size = 0x0e0000, ++ }, { ++ .name = "ART", + .offset = 0x3e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "firmware", -+ .offset = 0x020000, -+ .size = 0x3c0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data tl_wr841n_v1_flash_data = { ++static struct flash_platform_data pb92_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = tl_wr841n_v1_partitions, -+ .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions), ++ .parts = pb92_partitions, ++ .nr_parts = ARRAY_SIZE(pb92_partitions), +#endif +}; + -+static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = { -+ { -+ .name = "tl-wr841n:green:system", -+ .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM, -+ .active_low = 1, -+ }, { -+ .name = "tl-wr841n:red:qss", -+ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED, -+ }, { -+ .name = "tl-wr841n:green:qss", -+ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN, -+ } -+}; ++#define PB92_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL) ++ ++#define PB92_GPIO_BTN_SW4 8 ++#define PB92_GPIO_BTN_SW5 3 + -+static struct gpio_button tl_wr841n_v1_gpio_buttons[] __initdata = { ++static struct gpio_keys_button pb92_gpio_keys[] __initdata = { + { -+ .desc = "reset", ++ .desc = "sw4", + .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = TL_WR841ND_V1_GPIO_BTN_RESET, ++ .code = BTN_0, ++ .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = PB92_GPIO_BTN_SW4, + .active_low = 1, + }, { -+ .desc = "qss", ++ .desc = "sw5", + .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = TL_WR841ND_V1_GPIO_BTN_QSS, ++ .code = BTN_1, ++ .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = PB92_GPIO_BTN_SW5, + .active_low = 1, + } +}; + -+static struct dsa_chip_data tl_wr841n_v1_dsa_chip = { -+ .port_names[0] = "wan", -+ .port_names[1] = "lan1", -+ .port_names[2] = "lan2", -+ .port_names[3] = "lan3", -+ .port_names[4] = "lan4", -+ .port_names[5] = "cpu", -+}; -+ -+static struct dsa_platform_data tl_wr841n_v1_dsa_data = { -+ .nr_chips = 1, -+ .chip = &tl_wr841n_v1_dsa_chip, -+}; -+ -+static void __init tl_wr841n_v1_setup(void) ++static void __init pb92_init(void) +{ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); -+ -+ ar71xx_set_mac_base(mac); ++ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); + -+ ar71xx_add_device_mdio(0x0); ++ ar71xx_add_device_m25p80(&pb92_flash_data); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_add_device_mdio(~BIT(0)); ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.phy_mask = BIT(0); + + ar71xx_add_device_eth(0); + -+ ar71xx_add_device_dsa(0, &tl_wr841n_v1_dsa_data); -+ -+ ar71xx_add_device_m25p80(&tl_wr841n_v1_flash_data); -+ -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio), -+ tl_wr841n_v1_leds_gpio); -+ -+ ar71xx_add_device_gpio_buttons(-1, TL_WR841ND_V1_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(tl_wr841n_v1_gpio_buttons), -+ tl_wr841n_v1_gpio_buttons); ++ ar71xx_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(pb92_gpio_keys), ++ pb92_gpio_keys); + -+ pb42_pci_init(); ++ pb9x_pci_init(); +} + -+MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1", -+ tl_wr841n_v1_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr941nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr941nd.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,142 @@ ++MIPS_MACHINE(AR71XX_MACH_PB92, "PB92", "Atheros PB92", pb92_init); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-rb4xx.c linux-2.6.39/arch/mips/ar71xx/mach-rb4xx.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-rb4xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-rb4xx.c 2011-08-24 02:41:55.567991163 +0200 +@@ -0,0 +1,344 @@ +/* -+ * TP-LINK TL-WR941ND board support ++ * MikroTik RouterBOARD 4xx series support + * -+ * Copyright (C) 2009-2010 Gabor Juhos ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + ++#include ++#include ++#include ++#include ++#include ++#include +#include +#include + +#include ++#include ++#include + +#include "machtype.h" +#include "devices.h" -+#include "dev-dsa.h" -+#include "dev-m25p80.h" -+#include "dev-ar913x-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" ++#include "dev-usb.h" + -+#define TL_WR941ND_GPIO_LED_SYSTEM 2 -+#define TL_WR941ND_GPIO_LED_QSS_RED 4 -+#define TL_WR941ND_GPIO_LED_QSS_GREEN 5 ++#define RB4XX_GPIO_USER_LED 4 ++#define RB4XX_GPIO_RESET_SWITCH 7 + -+#define TL_WR941ND_GPIO_BTN_RESET 3 -+#define TL_WR941ND_GPIO_BTN_QSS 7 ++#define RB4XX_GPIO_CPLD_BASE 32 ++#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1) ++#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2) ++#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3) ++#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4) ++#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5) + -+#define TL_WR941ND_BUTTONS_POLL_INTERVAL 20 ++#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL) + -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition tl_wr941nd_partitions[] = { ++static struct gpio_led rb4xx_leds_gpio[] __initdata = { + { -+ .name = "u-boot", -+ .offset = 0, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "kernel", -+ .offset = 0x020000, -+ .size = 0x140000, -+ } , { -+ .name = "rootfs", -+ .offset = 0x160000, -+ .size = 0x290000, -+ } , { -+ .name = "art", -+ .offset = 0x3f0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "firmware", -+ .offset = 0x020000, -+ .size = 0x3d0000, ++ .name = "rb4xx:yellow:user", ++ .gpio = RB4XX_GPIO_USER_LED, ++ .active_low = 0, ++ }, { ++ .name = "rb4xx:green:led1", ++ .gpio = RB4XX_GPIO_CPLD_LED1, ++ .active_low = 1, ++ }, { ++ .name = "rb4xx:green:led2", ++ .gpio = RB4XX_GPIO_CPLD_LED2, ++ .active_low = 1, ++ }, { ++ .name = "rb4xx:green:led3", ++ .gpio = RB4XX_GPIO_CPLD_LED3, ++ .active_low = 1, ++ }, { ++ .name = "rb4xx:green:led4", ++ .gpio = RB4XX_GPIO_CPLD_LED4, ++ .active_low = 1, ++ }, { ++ .name = "rb4xx:green:led5", ++ .gpio = RB4XX_GPIO_CPLD_LED5, ++ .active_low = 0, ++ }, ++}; ++ ++static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = { ++ { ++ .desc = "reset_switch", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = RB4XX_GPIO_RESET_SWITCH, ++ .active_low = 1, + } +}; -+#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data tl_wr941nd_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .parts = tl_wr941nd_partitions, -+ .nr_parts = ARRAY_SIZE(tl_wr941nd_partitions), -+#endif ++static struct platform_device rb4xx_nand_device = { ++ .name = "rb4xx-nand", ++ .id = -1, +}; + -+static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = { ++static struct ar71xx_pci_irq rb4xx_pci_irqs[] __initdata = { + { -+ .name = "tl-wr941nd:green:system", -+ .gpio = TL_WR941ND_GPIO_LED_SYSTEM, -+ .active_low = 1, ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV2, + }, { -+ .name = "tl-wr941nd:red:qss", -+ .gpio = TL_WR941ND_GPIO_LED_QSS_RED, ++ .slot = 1, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, + }, { -+ .name = "tl-wr941nd:green:qss", -+ .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN, ++ .slot = 1, ++ .pin = 2, ++ .irq = AR71XX_PCI_IRQ_DEV1, ++ }, { ++ .slot = 2, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV1, ++ }, { ++ .slot = 3, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV2, + } +}; + -+static struct gpio_button tl_wr941nd_gpio_buttons[] __initdata = { ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition rb4xx_partitions[] = { + { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = TL_WR941ND_GPIO_BTN_RESET, -+ .active_low = 1, ++ .name = "routerboot", ++ .offset = 0, ++ .size = 0x0b000, ++ .mask_flags = MTD_WRITEABLE, + }, { -+ .desc = "qss", -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = TL_WR941ND_GPIO_BTN_QSS, -+ .active_low = 1, ++ .name = "hard_config", ++ .offset = 0x0b000, ++ .size = 0x01000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "bios", ++ .offset = 0x0d000, ++ .size = 0x02000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "soft_config", ++ .offset = 0x0f000, ++ .size = 0x01000, + } +}; ++#define rb4xx_num_partitions ARRAY_SIZE(rb4xx_partitions) ++#else /* CONFIG_MTD_PARTITIONS */ ++#define rb4xx_partitions NULL ++#define rb4xx_num_partitions 0 ++#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct dsa_chip_data tl_wr941nd_dsa_chip = { -+ .port_names[0] = "wan", -+ .port_names[1] = "lan1", -+ .port_names[2] = "lan2", -+ .port_names[3] = "lan3", -+ .port_names[4] = "lan4", -+ .port_names[5] = "cpu", ++static struct flash_platform_data rb4xx_flash_data = { ++ .type = "pm25lv512", ++ .parts = rb4xx_partitions, ++ .nr_parts = rb4xx_num_partitions, +}; + -+static struct dsa_platform_data tl_wr941nd_dsa_data = { -+ .nr_chips = 1, -+ .chip = &tl_wr941nd_dsa_chip, ++static struct rb4xx_cpld_platform_data rb4xx_cpld_data = { ++ .gpio_base = RB4XX_GPIO_CPLD_BASE, +}; + -+static void __init tl_wr941nd_setup(void) -+{ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ar71xx_set_mac_base(mac); ++static struct mmc_spi_platform_data rb4xx_mmc_data = { ++ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, ++}; + -+ ar71xx_add_device_mdio(0x0); ++static struct spi_board_info rb4xx_spi_info[] = { ++ { ++ .bus_num = 0, ++ .chip_select = 0, ++ .max_speed_hz = 25000000, ++ .modalias = "m25p80", ++ .platform_data = &rb4xx_flash_data, ++ }, { ++ .bus_num = 0, ++ .chip_select = 1, ++ .max_speed_hz = 25000000, ++ .modalias = "spi-rb4xx-cpld", ++ .platform_data = &rb4xx_cpld_data, ++ } ++}; + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.speed = SPEED_100; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ -+ ar71xx_add_device_eth(0); -+ ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data); -+ -+ ar71xx_add_device_m25p80(&tl_wr941nd_flash_data); -+ -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio), -+ tl_wr941nd_leds_gpio); -+ -+ ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(tl_wr941nd_gpio_buttons), -+ tl_wr941nd_gpio_buttons); -+ ar913x_add_device_wmac(eeprom, mac); -+} -+ -+MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND", -+ tl_wr941nd_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ubnt.c linux-2.6.39/arch/mips/ar71xx/mach-ubnt.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-ubnt.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-ubnt.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,281 @@ -+/* -+ * Ubiquiti RouterStation support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * Copyright (C) 2008 Ubiquiti -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+ -+#include "machtype.h" -+#include "devices.h" -+#include "dev-m25p80.h" -+#include "dev-ap91-pci.h" -+#include "dev-gpio-buttons.h" -+#include "dev-pb42-pci.h" -+#include "dev-leds-gpio.h" -+#include "dev-usb.h" -+ -+#define UBNT_RS_GPIO_LED_RF 2 -+#define UBNT_RS_GPIO_SW4 8 -+ -+#define UBNT_LS_SR71_GPIO_LED_D25 0 -+#define UBNT_LS_SR71_GPIO_LED_D26 1 -+#define UBNT_LS_SR71_GPIO_LED_D24 2 -+#define UBNT_LS_SR71_GPIO_LED_D23 4 -+#define UBNT_LS_SR71_GPIO_LED_D22 5 -+#define UBNT_LS_SR71_GPIO_LED_D27 6 -+#define UBNT_LS_SR71_GPIO_LED_D28 7 -+ -+#define UBNT_M_GPIO_LED_L1 0 -+#define UBNT_M_GPIO_LED_L2 1 -+#define UBNT_M_GPIO_LED_L3 11 -+#define UBNT_M_GPIO_LED_L4 7 -+#define UBNT_M_GPIO_BTN_RESET 12 -+ -+#define UBNT_BUTTONS_POLL_INTERVAL 20 -+ -+static struct gpio_led ubnt_rs_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:green:rf", -+ .gpio = UBNT_RS_GPIO_LED_RF, -+ .active_low = 0, -+ } -+}; -+ -+static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = { ++static struct spi_board_info rb4xx_microsd_info[] = { + { -+ .name = "ubnt:green:d22", -+ .gpio = UBNT_LS_SR71_GPIO_LED_D22, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:d23", -+ .gpio = UBNT_LS_SR71_GPIO_LED_D23, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:d24", -+ .gpio = UBNT_LS_SR71_GPIO_LED_D24, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:red:d25", -+ .gpio = UBNT_LS_SR71_GPIO_LED_D25, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:red:d26", -+ .gpio = UBNT_LS_SR71_GPIO_LED_D26, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:d27", -+ .gpio = UBNT_LS_SR71_GPIO_LED_D27, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:d28", -+ .gpio = UBNT_LS_SR71_GPIO_LED_D28, -+ .active_low = 0, ++ .bus_num = 0, ++ .chip_select = 2, ++ .max_speed_hz = 25000000, ++ .modalias = "mmc_spi", ++ .platform_data = &rb4xx_mmc_data, + } +}; + -+static struct gpio_led ubnt_m_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:red:link1", -+ .gpio = UBNT_M_GPIO_LED_L1, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:orange:link2", -+ .gpio = UBNT_M_GPIO_LED_L2, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:link3", -+ .gpio = UBNT_M_GPIO_LED_L3, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:link4", -+ .gpio = UBNT_M_GPIO_LED_L4, -+ .active_low = 0, -+ } -+}; + -+static struct gpio_button ubnt_gpio_buttons[] __initdata = { ++static struct resource rb4xx_spi_resources[] = { + { -+ .desc = "sw4", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = UBNT_RS_GPIO_SW4, -+ .active_low = 1, -+ } ++ .start = AR71XX_SPI_BASE, ++ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, +}; + -+static struct gpio_button ubnt_m_gpio_buttons[] __initdata = { -+ { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = UBNT_M_GPIO_BTN_RESET, -+ .active_low = 1, -+ } ++static struct platform_device rb4xx_spi_device = { ++ .name = "rb4xx-spi", ++ .id = -1, ++ .resource = rb4xx_spi_resources, ++ .num_resources = ARRAY_SIZE(rb4xx_spi_resources), +}; + -+static void __init ubnt_generic_setup(void) ++static void __init rb4xx_generic_setup(void) +{ -+ ar71xx_add_device_m25p80(NULL); ++ ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN | ++ AR71XX_GPIO_FUNC_SPI_CS2_EN); + -+ ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_gpio_buttons), -+ ubnt_gpio_buttons); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio), ++ rb4xx_leds_gpio); + -+ pb42_pci_init(); -+} ++ ar71xx_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(rb4xx_gpio_keys), ++ rb4xx_gpio_keys); + -+#define UBNT_RS_WAN_PHYMASK (1 << 20) -+#define UBNT_RS_LAN_PHYMASK ((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19)) ++ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info)); ++ platform_device_register(&rb4xx_spi_device); ++ platform_device_register(&rb4xx_nand_device); ++} + -+static void __init ubnt_rs_setup(void) ++static void __init rb411_setup(void) +{ -+ ubnt_generic_setup(); ++ rb4xx_generic_setup(); ++ spi_register_board_info(rb4xx_microsd_info, ++ ARRAY_SIZE(rb4xx_microsd_info)); + -+ ar71xx_add_device_mdio(~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK)); ++ ar71xx_add_device_mdio(0xfffffffc); + ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; -+ -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.speed = SPEED_100; -+ ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.phy_mask = 0x00000003; + + ar71xx_add_device_eth(0); -+ ar71xx_add_device_eth(1); + -+ ar71xx_add_device_usb(); -+ -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), -+ ubnt_rs_leds_gpio); ++ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); +} + -+MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation", -+ ubnt_rs_setup); ++MIPS_MACHINE(AR71XX_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH", ++ rb411_setup); ++ ++static void __init rb411u_setup(void) ++{ ++ rb411_setup(); ++ ar71xx_add_device_usb(); ++} + -+MIPS_MACHINE(AR71XX_MACH_UBNT_AR71XX, "Ubiquiti AR71xx-based board", -+ "Ubiquiti RouterStation", ubnt_rs_setup); ++MIPS_MACHINE(AR71XX_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U", ++ rb411u_setup); + -+#define UBNT_RSPRO_WAN_PHYMASK (1 << 4) -+#define UBNT_RSPRO_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3)) ++#define RB433_LAN_PHYMASK BIT(0) ++#define RB433_WAN_PHYMASK BIT(4) ++#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK) + -+static void __init ubnt_rspro_setup(void) ++static void __init rb433_setup(void) +{ -+ ubnt_generic_setup(); ++ rb4xx_generic_setup(); ++ spi_register_board_info(rb4xx_microsd_info, ++ ARRAY_SIZE(rb4xx_microsd_info)); + -+ ar71xx_add_device_mdio(~(UBNT_RSPRO_WAN_PHYMASK | UBNT_RSPRO_LAN_PHYMASK)); ++ ar71xx_add_device_mdio(~RB433_MDIO_PHYMASK); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_eth0_data.phy_mask = RB433_LAN_PHYMASK; + -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK; -+ ar71xx_eth1_data.speed = SPEED_1000; -+ ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.phy_mask = RB433_WAN_PHYMASK; + -+ ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); ++ ar71xx_add_device_eth(0); + -+ ar71xx_add_device_usb(); -+ -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), -+ ubnt_rs_leds_gpio); ++ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); +} + -+MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro", -+ ubnt_rspro_setup); ++MIPS_MACHINE(AR71XX_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH", ++ rb433_setup); + -+static void __init ubnt_lsx_setup(void) ++static void __init rb433u_setup(void) +{ -+ ubnt_generic_setup(); ++ rb433_setup(); ++ ar71xx_add_device_usb(); +} + -+MIPS_MACHINE(AR71XX_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup); ++MIPS_MACHINE(AR71XX_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH", ++ rb433u_setup); + -+#define UBNT_LSSR71_PHY_MASK (1 << 1) ++#define RB450_LAN_PHYMASK BIT(0) ++#define RB450_WAN_PHYMASK BIT(4) ++#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK) + -+static void __init ubnt_lssr71_setup(void) ++static void __init rb450_generic_setup(int gige) +{ -+ ubnt_generic_setup(); ++ rb4xx_generic_setup(); ++ ar71xx_add_device_mdio(~RB450_MDIO_PHYMASK); + -+ ar71xx_add_device_mdio(~UBNT_LSSR71_PHY_MASK); ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1); ++ ar71xx_eth0_data.phy_if_mode = (gige) ? ++ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII; ++ ar71xx_eth0_data.phy_mask = RB450_LAN_PHYMASK; + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ar71xx_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK; ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0); ++ ar71xx_eth1_data.phy_if_mode = (gige) ? ++ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.phy_mask = RB450_WAN_PHYMASK; + ++ ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); ++} + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio), -+ ubnt_ls_sr71_leds_gpio); ++static void __init rb450_setup(void) ++{ ++ rb450_generic_setup(0); +} + -+MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", -+ ubnt_lssr71_setup); ++MIPS_MACHINE(AR71XX_MACH_RB_450, "450", "MikroTik RouterBOARD 450", ++ rb450_setup); + -+static void __init ubnt_m_setup(void) ++static void __init rb450g_setup(void) +{ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ rb450_generic_setup(1); ++ spi_register_board_info(rb4xx_microsd_info, ++ ARRAY_SIZE(rb4xx_microsd_info)); ++} + -+ ar71xx_set_mac_base(mac); ++MIPS_MACHINE(AR71XX_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G", ++ rb450g_setup); + -+ ar71xx_add_device_m25p80(NULL); ++static void __init rb493_setup(void) ++{ ++ rb4xx_generic_setup(); + -+ ar71xx_add_device_mdio(~0); ++ ar71xx_add_device_mdio(0x3fffff00); + ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ ar71xx_eth0_data.fifo_cfg1 = 0x0010ffff; -+ ar71xx_eth0_data.fifo_cfg2 = 0x015500aa; -+ ar71xx_eth0_data.fifo_cfg3 = 0x01f00140; -+ -+ ar71xx_add_device_eth(0); -+ -+ ap91_pci_init(ee, NULL); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio), -+ ubnt_m_leds_gpio); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.phy_mask = 0x00000001; + -+ ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_m_gpio_buttons), -+ ubnt_m_gpio_buttons); -+} ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+static void __init ubnt_rocket_m_setup(void) -+{ -+ ubnt_m_setup(); -+ ar71xx_add_device_usb(); ++ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs); +} + -+MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", -+ ubnt_m_setup); -+MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", -+ ubnt_rocket_m_setup); -+ -+/* TODO detect the second ethernet port and use one -+ init function for all Ubiquiti MIMO series products */ -+static void __init ubnt_nano_m_setup(void) -+{ -+ ubnt_m_setup(); -+ -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.speed = SPEED_1000; -+ ar71xx_eth1_data.duplex = DUPLEX_FULL; -+ ar71xx_eth1_data.fifo_cfg1 = 0x0010ffff; -+ ar71xx_eth1_data.fifo_cfg2 = 0x015500aa; -+ ar71xx_eth1_data.fifo_cfg3 = 0x01f00140; -+ -+ ar71xx_add_device_eth(1); -+} -+ -+MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", -+ ubnt_nano_m_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wndr3700.c linux-2.6.39/arch/mips/ar71xx/mach-wndr3700.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-wndr3700.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wndr3700.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,209 @@ ++MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH", ++ rb493_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-rb750.c linux-2.6.39/arch/mips/ar71xx/mach-rb750.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-rb750.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-rb750.c 2011-08-24 02:41:55.567991163 +0200 +@@ -0,0 +1,144 @@ +/* -+ * Netgear WNDR3700 board support ++ * MikroTik RouterBOARD 750 support + * -+ * Copyright (C) 2009 Marco Porsch -+ * Copyright (C) 2009-2010 Gabor Juhos ++ * Copyright (C) 2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -6333,213 +6659,148 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wndr3700.c linux-2.6.39/arch/m + */ + +#include -+#include -+#include -+#include -+#include -+ +#include ++#include + +#include "machtype.h" +#include "devices.h" -+#include "dev-m25p80.h" -+#include "dev-ap94-pci.h" -+#include "dev-gpio-buttons.h" -+#include "dev-leds-gpio.h" -+#include "dev-usb.h" -+ -+#define WNDR3700_GPIO_LED_WPS_ORANGE 0 -+#define WNDR3700_GPIO_LED_POWER_ORANGE 1 -+#define WNDR3700_GPIO_LED_POWER_GREEN 2 -+#define WNDR3700_GPIO_LED_WPS_GREEN 4 -+#define WNDR3700_GPIO_LED_WAN_GREEN 6 -+ -+#define WNDR3700_GPIO_BTN_WPS 3 -+#define WNDR3700_GPIO_BTN_RESET 8 -+#define WNDR3700_GPIO_BTN_WIFI 11 -+ -+#define WNDR3700_GPIO_RTL8366_SDA 5 -+#define WNDR3700_GPIO_RTL8366_SCK 7 -+ -+#define WNDR3700_BUTTONS_POLL_INTERVAL 20 -+ -+#define WNDR3700_WMAC0_MAC_OFFSET 0 -+#define WNDR3700_WMAC1_MAC_OFFSET 0xc -+#define WNDR3700_CALDATA0_OFFSET 0x1000 -+#define WNDR3700_CALDATA1_OFFSET 0x5000 -+ -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition wndr3700_partitions[] = { -+ { -+ .name = "uboot", -+ .offset = 0, -+ .size = 0x050000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "env", -+ .offset = 0x050000, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "rootfs", -+ .offset = 0x070000, -+ .size = 0x720000, -+ } , { -+ .name = "config", -+ .offset = 0x790000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "config_bak", -+ .offset = 0x7a0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "pot", -+ .offset = 0x7b0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "traffic_meter", -+ .offset = 0x7c0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "language", -+ .offset = 0x7d0000, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "caldata", -+ .offset = 0x7f0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } -+}; -+#endif /* CONFIG_MTD_PARTITIONS */ -+ -+static struct flash_platform_data wndr3700_flash_data = { -+#ifdef CONFIG_MTD_PARTITIONS -+ .parts = wndr3700_partitions, -+ .nr_parts = ARRAY_SIZE(wndr3700_partitions), -+#endif -+}; + -+static struct gpio_led wndr3700_leds_gpio[] __initdata = { ++static struct rb750_led_data rb750_leds[] = { + { -+ .name = "wndr3700:green:power", -+ .gpio = WNDR3700_GPIO_LED_POWER_GREEN, ++ .name = "rb750:green:act", ++ .mask = RB750_LED_ACT, + .active_low = 1, + }, { -+ .name = "wndr3700:orange:power", -+ .gpio = WNDR3700_GPIO_LED_POWER_ORANGE, ++ .name = "rb750:green:port1", ++ .mask = RB750_LED_PORT5, + .active_low = 1, + }, { -+ .name = "wndr3700:green:wps", -+ .gpio = WNDR3700_GPIO_LED_WPS_GREEN, ++ .name = "rb750:green:port2", ++ .mask = RB750_LED_PORT4, + .active_low = 1, + }, { -+ .name = "wndr3700:orange:wps", -+ .gpio = WNDR3700_GPIO_LED_WPS_ORANGE, ++ .name = "rb750:green:port3", ++ .mask = RB750_LED_PORT3, + .active_low = 1, + }, { -+ .name = "wndr3700:green:wan", -+ .gpio = WNDR3700_GPIO_LED_WAN_GREEN, -+ .active_low = 1, -+ } -+}; -+ -+static struct gpio_button wndr3700_gpio_buttons[] __initdata = { -+ { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = WNDR3700_GPIO_BTN_RESET, ++ .name = "rb750:green:port4", ++ .mask = RB750_LED_PORT2, + .active_low = 1, + }, { -+ .desc = "wps", -+ .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = WNDR3700_GPIO_BTN_WPS, -+ .active_low = 1, -+ } , { -+ .desc = "wifi", -+ .type = EV_KEY, -+ .code = BTN_2, -+ .threshold = 3, -+ .gpio = WNDR3700_GPIO_BTN_WIFI, ++ .name = "rb750:green:port5", ++ .mask = RB750_LED_PORT1, + .active_low = 1, + } +}; + -+static struct rtl8366s_platform_data wndr3700_rtl8366s_data = { -+ .gpio_sda = WNDR3700_GPIO_RTL8366_SDA, -+ .gpio_sck = WNDR3700_GPIO_RTL8366_SCK, ++static struct rb750_led_platform_data rb750_leds_data = { ++ .num_leds = ARRAY_SIZE(rb750_leds), ++ .leds = rb750_leds, +}; + -+static struct platform_device wndr3700_rtl8366s_device = { -+ .name = RTL8366S_DRIVER_NAME, -+ .id = -1, -+ .dev = { -+ .platform_data = &wndr3700_rtl8366s_data, ++static struct platform_device rb750_leds_device = { ++ .name = "leds-rb750", ++ .dev = { ++ .platform_data = &rb750_leds_data, + } +}; + -+static void __init wndr3700_setup(void) ++static struct platform_device rb750_nand_device = { ++ .name = "rb750-nand", ++ .id = -1, ++}; ++ ++int rb750_latch_change(u32 mask_clr, u32 mask_set) +{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ static DEFINE_SPINLOCK(lock); ++ static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE; ++ static u32 latch_oe; ++ static u32 latch_clr; ++ unsigned long flags; ++ u32 t; ++ int ret = 0; + -+ ar71xx_set_mac_base(art); ++ spin_lock_irqsave(&lock, flags); + -+ ar71xx_eth0_pll_data.pll_1000 = 0x11110000; -+ ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth0_data.speed = SPEED_1000; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ if ((mask_clr & BIT(31)) != 0 && ++ (latch_set & RB750_LVC573_LE) == 0) { ++ goto unlock; ++ } + -+ ar71xx_eth1_pll_data.pll_1000 = 0x11110000; -+ ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth1_data.phy_mask = 0x10; ++ latch_set = (latch_set | mask_set) & ~mask_clr; ++ latch_clr = (latch_clr | mask_clr) & ~mask_set; + -+ ar71xx_add_device_eth(0); -+ ar71xx_add_device_eth(1); ++ if (latch_oe == 0) ++ latch_oe = __raw_readl(ar71xx_gpio_base + GPIO_REG_OE); + -+ ar71xx_add_device_usb(); ++ if (likely(latch_set & RB750_LVC573_LE)) { ++ void __iomem *base = ar71xx_gpio_base; + -+ ar71xx_add_device_m25p80(&wndr3700_flash_data); ++ t = __raw_readl(base + GPIO_REG_OE); ++ t |= mask_clr | latch_oe | mask_set; + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio), -+ wndr3700_leds_gpio); ++ __raw_writel(t, base + GPIO_REG_OE); ++ __raw_writel(latch_clr, base + GPIO_REG_CLEAR); ++ __raw_writel(latch_set, base + GPIO_REG_SET); ++ } else if (mask_clr & RB750_LVC573_LE) { ++ void __iomem *base = ar71xx_gpio_base; + -+ ar71xx_add_device_gpio_buttons(-1, WNDR3700_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(wndr3700_gpio_buttons), -+ wndr3700_gpio_buttons); ++ latch_oe = __raw_readl(base + GPIO_REG_OE); ++ __raw_writel(RB750_LVC573_LE, base + GPIO_REG_CLEAR); ++ /* flush write */ ++ __raw_readl(base + GPIO_REG_CLEAR); ++ } + -+ platform_device_register(&wndr3700_rtl8366s_device); -+ platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0); ++ ret = 1; + -+ ap94_pci_enable_quirk_wndr3700(); -+ ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET, -+ art + WNDR3700_WMAC0_MAC_OFFSET, -+ art + WNDR3700_CALDATA1_OFFSET, -+ art + WNDR3700_WMAC1_MAC_OFFSET); ++unlock: ++ spin_unlock_irqrestore(&lock, flags); ++ return ret; +} ++EXPORT_SYMBOL_GPL(rb750_latch_change); + -+MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700", -+ wndr3700_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wnr2000.c linux-2.6.39/arch/mips/ar71xx/mach-wnr2000.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-wnr2000.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wnr2000.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,148 @@ ++static void __init rb750_setup(void) ++{ ++ ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | ++ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | ++ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | ++ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | ++ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); ++ ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1); ++ ++ /* WAN port */ ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.phy_mask = BIT(4); ++ ++ /* LAN ports */ ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ar71xx_eth1_data.has_ar7240_switch = 1; ++ ++ ar71xx_add_device_mdio(0x0); ++ ar71xx_add_device_eth(1); ++ ar71xx_add_device_eth(0); ++ ++ platform_device_register(&rb750_leds_device); ++ platform_device_register(&rb750_nand_device); ++} ++ ++MIPS_MACHINE(AR71XX_MACH_RB_750, "750i", "MikroTik RouterBOARD 750", ++ rb750_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tew-632brp.c linux-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tew-632brp.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c 2011-08-24 02:41:55.577989822 +0200 +@@ -0,0 +1,151 @@ +/* -+ * NETGEAR WNR2000 board support ++ * TrendNET TEW-632BRP board support + * + * Copyright (C) 2008-2009 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz -+ * Copyright (C) 2008-2009 Andy Boyett + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -6554,149 +6815,153 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wnr2000.c linux-2.6.39/arch/mi +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-ar913x-wmac.h" ++#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" ++#include "nvram.h" + -+#define WNR2000_GPIO_LED_PWR_GREEN 14 -+#define WNR2000_GPIO_LED_PWR_AMBER 7 -+#define WNR2000_GPIO_LED_WPS 4 -+#define WNR2000_GPIO_LED_WLAN 6 -+#define WNR2000_GPIO_BTN_RESET 21 -+#define WNR2000_GPIO_BTN_WPS 8 ++#define TEW_632BRP_GPIO_LED_STATUS 1 ++#define TEW_632BRP_GPIO_LED_WPS 3 ++#define TEW_632BRP_GPIO_LED_WLAN 6 ++#define TEW_632BRP_GPIO_BTN_WPS 12 ++#define TEW_632BRP_GPIO_BTN_RESET 21 + -+#define WNR2000_BUTTONS_POLL_INTERVAL 20 ++#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL) ++ ++#define TEW_632BRP_CONFIG_ADDR 0x1f020000 ++#define TEW_632BRP_CONFIG_SIZE 0x10000 + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition wnr2000_partitions[] = { ++static struct mtd_partition tew_632brp_partitions[] = { + { + .name = "u-boot", + .offset = 0, -+ .size = 0x040000, ++ .size = 0x020000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "u-boot-env", -+ .offset = 0x040000, ++ }, { ++ .name = "config", ++ .offset = 0x020000, + .size = 0x010000, -+ } , { ++ }, { ++ .name = "kernel", ++ .offset = 0x030000, ++ .size = 0x0e0000, ++ }, { + .name = "rootfs", -+ .offset = 0x050000, -+ .size = 0x240000, -+ } , { -+ .name = "user-config", -+ .offset = 0x290000, -+ .size = 0x010000, -+ } , { -+ .name = "uImage", -+ .offset = 0x2a0000, -+ .size = 0x120000, -+ } , { -+ .name = "language_table", -+ .offset = 0x3c0000, -+ .size = 0x020000, -+ } , { -+ .name = "rootfs_checksum", -+ .offset = 0x3e0000, -+ .size = 0x010000, -+ } , { ++ .offset = 0x110000, ++ .size = 0x2e0000, ++ }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x030000, ++ .size = 0x3c0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data wnr2000_flash_data = { ++static struct flash_platform_data tew_632brp_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = wnr2000_partitions, -+ .nr_parts = ARRAY_SIZE(wnr2000_partitions), ++ .parts = tew_632brp_partitions, ++ .nr_parts = ARRAY_SIZE(tew_632brp_partitions), +#endif +}; + -+static struct gpio_led wnr2000_leds_gpio[] __initdata = { ++static struct gpio_led tew_632brp_leds_gpio[] __initdata = { + { -+ .name = "wnr2000:green:power", -+ .gpio = WNR2000_GPIO_LED_PWR_GREEN, -+ .active_low = 1, -+ }, { -+ .name = "wnr2000:amber:power", -+ .gpio = WNR2000_GPIO_LED_PWR_AMBER, ++ .name = "tew-632brp:green:status", ++ .gpio = TEW_632BRP_GPIO_LED_STATUS, + .active_low = 1, + }, { -+ .name = "wnr2000:green:wps", -+ .gpio = WNR2000_GPIO_LED_WPS, ++ .name = "tew-632brp:blue:wps", ++ .gpio = TEW_632BRP_GPIO_LED_WPS, + .active_low = 1, + }, { -+ .name = "wnr2000:blue:wlan", -+ .gpio = WNR2000_GPIO_LED_WLAN, ++ .name = "tew-632brp:green:wlan", ++ .gpio = TEW_632BRP_GPIO_LED_WLAN, + .active_low = 1, + } +}; + -+static struct gpio_button wnr2000_gpio_buttons[] __initdata = { ++static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = WNR2000_GPIO_BTN_RESET, ++ .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TEW_632BRP_GPIO_BTN_RESET, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = WNR2000_GPIO_BTN_WPS, ++ .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TEW_632BRP_GPIO_BTN_WPS, + } +}; + -+static void __init wnr2000_setup(void) ++#define TEW_632BRP_LAN_PHYMASK BIT(0) ++#define TEW_632BRP_WAN_PHYMASK BIT(4) ++#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \ ++ TEW_632BRP_WAN_PHYMASK)) ++ ++static void __init tew_632brp_setup(void) +{ ++ const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ u8 mac[6]; ++ u8 *wlan_mac = NULL; + -+ ar71xx_set_mac_base(eeprom); -+ ar71xx_add_device_mdio(0x0); ++ if (nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE, ++ "lan_mac=", mac) == 0) { ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); ++ wlan_mac = mac; ++ } ++ ++ ar71xx_add_device_mdio(TEW_632BRP_MDIO_MASK); + + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.speed = SPEED_100; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ ar71xx_eth0_data.has_ar8216 = 1; ++ ar71xx_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK; + + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = 0x10; ++ ar71xx_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK; + + ar71xx_add_device_eth(0); + ar71xx_add_device_eth(1); + -+ ar71xx_add_device_m25p80(&wnr2000_flash_data); -+ -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio), -+ wnr2000_leds_gpio); ++ ar71xx_add_device_m25p80(&tew_632brp_flash_data); + -+ ar71xx_add_device_gpio_buttons(-1, WNR2000_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(wnr2000_gpio_buttons), -+ wnr2000_gpio_buttons); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio), ++ tew_632brp_leds_gpio); + ++ ar71xx_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tew_632brp_gpio_keys), ++ tew_632brp_gpio_keys); + -+ ar913x_add_device_wmac(eeprom, NULL); ++ ar9xxx_add_device_wmac(eeprom, wlan_mac); +} + -+MIPS_MACHINE(AR71XX_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wp543.c linux-2.6.39/arch/mips/ar71xx/mach-wp543.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-wp543.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wp543.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,99 @@ ++MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP", ++ tew_632brp_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-mr3x20.c linux-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-mr3x20.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c 2011-08-24 02:41:55.577989822 +0200 +@@ -0,0 +1,166 @@ +/* -+ * Compex WP543/WPJ543 board support ++ * TP-LINK TL-MR3220/3420 board support + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + ++#include +#include +#include + @@ -6705,94 +6970,162 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wp543.c linux-2.6.39/arch/mips +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-pb42-pci.h" ++#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + -+#define WP543_GPIO_SW6 2 -+#define WP543_GPIO_LED_1 3 -+#define WP543_GPIO_LED_2 4 -+#define WP543_GPIO_LED_WLAN 5 -+#define WP543_GPIO_LED_CONN 6 -+#define WP543_GPIO_LED_DIAG 7 -+#define WP543_GPIO_SW4 8 ++#define TL_MR3X20_GPIO_LED_QSS 0 ++#define TL_MR3X20_GPIO_LED_SYSTEM 1 ++#define TL_MR3X20_GPIO_LED_3G 8 + -+#define WP543_BUTTONS_POLL_INTERVAL 20 ++#define TL_MR3X20_GPIO_BTN_RESET 11 ++#define TL_MR3X20_GPIO_BTN_QSS 12 + -+static struct gpio_led wp543_leds_gpio[] __initdata = { ++#define TL_MR3X20_GPIO_USB_POWER 6 ++ ++#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL) ++ ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition tl_mr3x20_partitions[] = { + { -+ .name = "wp543:green:led1", -+ .gpio = WP543_GPIO_LED_1, -+ .active_low = 1, ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, + }, { -+ .name = "wp543:green:led2", -+ .gpio = WP543_GPIO_LED_2, -+ .active_low = 1, ++ .name = "kernel", ++ .offset = 0x020000, ++ .size = 0x140000, + }, { -+ .name = "wp543:green:wlan", -+ .gpio = WP543_GPIO_LED_WLAN, ++ .name = "rootfs", ++ .offset = 0x160000, ++ .size = 0x290000, ++ }, { ++ .name = "art", ++ .offset = 0x3f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x020000, ++ .size = 0x3d0000, ++ } ++}; ++#define tl_mr3x20_num_partitions ARRAY_SIZE(tl_mr3x20_partitions) ++#else ++#define tl_mr3x20_partitions NULL ++#define tl_mr3x20_num_partitions 0 ++#endif /* CONFIG_MTD_PARTITIONS */ ++ ++static struct flash_platform_data tl_mr3x20_flash_data = { ++ .parts = tl_mr3x20_partitions, ++ .nr_parts = tl_mr3x20_num_partitions, ++}; ++ ++static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = { ++ { ++ .name = "tl-mr3x20:green:system", ++ .gpio = TL_MR3X20_GPIO_LED_SYSTEM, + .active_low = 1, + }, { -+ .name = "wp543:green:conn", -+ .gpio = WP543_GPIO_LED_CONN, ++ .name = "tl-mr3x20:green:qss", ++ .gpio = TL_MR3X20_GPIO_LED_QSS, + .active_low = 1, + }, { -+ .name = "wp543:green:diag", -+ .gpio = WP543_GPIO_LED_DIAG, ++ .name = "tl-mr3x20:green:3g", ++ .gpio = TL_MR3X20_GPIO_LED_3G, + .active_low = 1, + } +}; + -+static struct gpio_button wp543_gpio_buttons[] __initdata = { ++static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = { + { -+ .desc = "sw6", ++ .desc = "reset", + .type = EV_KEY, -+ .code = BTN_0, -+ .threshold = 3, -+ .gpio = WP543_GPIO_SW6, ++ .code = KEY_RESTART, ++ .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_MR3X20_GPIO_BTN_RESET, ++ .active_low = 1, + }, { -+ .desc = "sw4", ++ .desc = "qss", + .type = EV_KEY, -+ .code = BTN_1, -+ .threshold = 3, -+ .gpio = WP543_GPIO_SW4, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_MR3X20_GPIO_BTN_QSS, ++ .active_low = 1, + } +}; + -+static void __init wp543_setup(void) ++static void __init tl_mr3x20_setup(void) +{ -+ ar71xx_add_device_m25p80(NULL); ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + -+ ar71xx_add_device_mdio(0xfffffff7); ++ /* enable power for the USB port */ ++ gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power"); ++ gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ar71xx_eth0_data.phy_mask = 0x08; -+ ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC | -+ RESET_MODULE_GE0_PHY; ++ ar71xx_add_device_m25p80(&tl_mr3x20_flash_data); ++ ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), ++ tl_mr3x20_leds_gpio); ++ ++ ar71xx_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_mr3x20_gpio_keys), ++ tl_mr3x20_gpio_keys); ++ ++ ar71xx_eth1_data.has_ar7240_switch = 1; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); ++ ++ /* WAN port */ ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.phy_mask = BIT(4); ++ ++ /* LAN ports */ ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ++ ar71xx_add_device_mdio(0x0); ++ ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); + + ar71xx_add_device_usb(); + -+ pb42_pci_init(); ++ ap91_pci_init(ee, mac); ++} + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio), -+ wp543_leds_gpio); ++static void __init tl_mr3220_setup(void) ++{ ++ tl_mr3x20_setup(); ++ ap91_pci_setup_wmac_led_pin(1); ++} ++ ++MIPS_MACHINE(AR71XX_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220", ++ tl_mr3220_setup); + -+ ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(wp543_gpio_buttons), -+ wp543_gpio_buttons); ++static void __init tl_mr3420_setup(void) ++{ ++ tl_mr3x20_setup(); ++ ap91_pci_setup_wmac_led_pin(0); +} + -+MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt160nl.c linux-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt160nl.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,158 @@ ++MIPS_MACHINE(AR71XX_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420", ++ tl_mr3420_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c 2011-08-24 02:41:55.587990766 +0200 +@@ -0,0 +1,130 @@ +/* -+ * Linksys WRT160NL board support ++ * TP-LINK TL-WA901ND board support + * -+ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2009-2010 Gabor Juhos ++ * Copyright (C) 2010 Pieter Hollants + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -6807,155 +7140,127 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt160nl.c linux-2.6.39/arch/m +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-ar913x-wmac.h" ++#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" -+#include "dev-usb.h" -+#include "nvram.h" + -+#define WRT160NL_GPIO_LED_POWER 14 -+#define WRT160NL_GPIO_LED_WPS_AMBER 9 -+#define WRT160NL_GPIO_LED_WPS_BLUE 8 -+#define WRT160NL_GPIO_LED_WLAN 6 ++#define TL_WA901ND_GPIO_LED_QSS 0 ++#define TL_WA901ND_GPIO_LED_SYSTEM 1 + -+#define WRT160NL_GPIO_BTN_WPS 7 -+#define WRT160NL_GPIO_BTN_RESET 21 ++#define TL_WA901ND_GPIO_BTN_RESET 11 ++#define TL_WA901ND_GPIO_BTN_QSS 12 + -+#define WRT160NL_BUTTONS_POLL_INTERVAL 20 -+ -+#define WRT160NL_NVRAM_ADDR 0x1f7e0000 -+#define WRT160NL_NVRAM_SIZE 0x10000 ++#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition wrt160nl_partitions[] = { ++static struct mtd_partition tl_wa901nd_partitions[] = { + { + .name = "u-boot", + .offset = 0, -+ .size = 0x040000, ++ .size = 0x020000, + .mask_flags = MTD_WRITEABLE, -+ } , { ++ }, { + .name = "kernel", -+ .offset = 0x040000, -+ .size = 0x0e0000, -+ } , { -+ .name = "filesytem", -+ .offset = 0x120000, -+ .size = 0x6c0000, -+ } , { -+ .name = "nvram", -+ .offset = 0x7e0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "ART", -+ .offset = 0x7f0000, ++ .offset = 0x020000, ++ .size = 0x140000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x160000, ++ .size = 0x290000, ++ }, { ++ .name = "art", ++ .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, -+ } , { ++ }, { + .name = "firmware", -+ .offset = 0x040000, -+ .size = 0x7a0000, ++ .offset = 0x020000, ++ .size = 0x3d0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data wrt160nl_flash_data = { ++static struct flash_platform_data tl_wa901nd_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = wrt160nl_partitions, -+ .nr_parts = ARRAY_SIZE(wrt160nl_partitions), ++ .parts = tl_wa901nd_partitions, ++ .nr_parts = ARRAY_SIZE(tl_wa901nd_partitions), +#endif +}; + -+static struct gpio_led wrt160nl_leds_gpio[] __initdata = { ++static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = { + { -+ .name = "wrt160nl:blue:power", -+ .gpio = WRT160NL_GPIO_LED_POWER, -+ .active_low = 1, -+ .default_trigger = "default-on", -+ }, { -+ .name = "wrt160nl:amber:wps", -+ .gpio = WRT160NL_GPIO_LED_WPS_AMBER, -+ .active_low = 1, -+ }, { -+ .name = "wrt160nl:blue:wps", -+ .gpio = WRT160NL_GPIO_LED_WPS_BLUE, ++ .name = "tl-wa901nd:green:system", ++ .gpio = TL_WA901ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { -+ .name = "wrt160nl:blue:wlan", -+ .gpio = WRT160NL_GPIO_LED_WLAN, ++ .name = "tl-wa901nd:green:qss", ++ .gpio = TL_WA901ND_GPIO_LED_QSS, + .active_low = 1, + } +}; + -+static struct gpio_button wrt160nl_gpio_buttons[] __initdata = { ++static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, -+ .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = WRT160NL_GPIO_BTN_RESET, ++ .code = BTN_0, ++ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WA901ND_GPIO_BTN_RESET, + .active_low = 1, + }, { -+ .desc = "wps", ++ .desc = "qss", + .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = WRT160NL_GPIO_BTN_WPS, ++ .code = BTN_1, ++ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WA901ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + -+static void __init wrt160nl_setup(void) ++static void __init tl_wa901nd_setup(void) +{ -+ const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR); -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); -+ u8 mac[6]; -+ -+ if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, -+ "lan_hwaddr=", mac) == 0) -+ ar71xx_set_mac_base(mac); -+ -+ ar71xx_add_device_mdio(0x0); -+ -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.phy_mask = 0x01; ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + ++ /* ++ * ar71xx_eth0 would be the WAN port, but is not connected on ++ * the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip, ++ * however we have a single LAN port only. ++ */ ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0); + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = 0x10; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ar71xx_eth1_data.has_ar7240_switch = 1; + -+ ar71xx_add_device_eth(0); ++ ar71xx_add_device_mdio(0x0); + ar71xx_add_device_eth(1); + -+ ar71xx_add_device_m25p80(&wrt160nl_flash_data); -+ -+ ar71xx_add_device_usb(); -+ -+ if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, -+ "wl0_hwaddr=", mac) == 0) -+ ar913x_add_device_wmac(eeprom, mac); -+ else -+ ar913x_add_device_wmac(eeprom, NULL); ++ ar71xx_add_device_m25p80(&tl_wa901nd_flash_data); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio), -+ wrt160nl_leds_gpio); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio), ++ tl_wa901nd_leds_gpio); + -+ ar71xx_add_device_gpio_buttons(-1, WRT160NL_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(wrt160nl_gpio_buttons), -+ wrt160nl_gpio_buttons); ++ ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_wa901nd_gpio_keys), ++ tl_wa901nd_gpio_keys); + ++ ap91_pci_init(ee, mac); +} + -+MIPS_MACHINE(AR71XX_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL", -+ wrt160nl_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt400n.c linux-2.6.39/arch/mips/ar71xx/mach-wrt400n.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt400n.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wrt400n.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,168 @@ ++MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND", ++ tl_wa901nd_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd-v2.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd-v2.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c 2011-08-24 02:41:55.587990766 +0200 +@@ -0,0 +1,132 @@ +/* -+ * Linksys WRT400N board support ++ * TP-LINK TL-WA901ND v2 board support + * + * Copyright (C) 2009-2010 Gabor Juhos -+ * Copyright (C) 2009 Imre Kaloz ++ * Copyright (C) 2010 Pieter Hollants ++ * Copyright (C) 2011 Jonathan Bennett + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -6969,574 +7274,424 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt400n.c linux-2.6.39/arch/mi + +#include "machtype.h" +#include "devices.h" -+#include "dev-ap94-pci.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" ++#include "dev-ar9xxx-wmac.h" + -+#define WRT400N_GPIO_LED_ORANGE 5 -+#define WRT400N_GPIO_LED_GREEN 4 -+#define WRT400N_GPIO_LED_POWER 1 -+#define WRT400N_GPIO_LED_WLAN 0 -+ -+#define WRT400N_GPIO_BTN_RESET 8 -+#define WRT400N_GPIO_BTN_WLSEC 3 ++#define TL_WA901ND_V2_GPIO_LED_QSS 4 ++#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2 ++#define TL_WA901ND_V2_GPIO_LED_WLAN 9 + -+#define WRT400N_BUTTONS_POLL_INTERVAL 20 + -+#define WRT400N_MAC_ADDR_OFFSET 0x120c -+#define WRT400N_CALDATA0_OFFSET 0x1000 -+#define WRT400N_CALDATA1_OFFSET 0x5000 ++#define TL_WA901ND_V2_GPIO_BTN_RESET 3 ++#define TL_WA901ND_V2_GPIO_BTN_QSS 7 + ++#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \ ++ (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL) +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition wrt400n_partitions[] = { ++static struct mtd_partition tl_wa901nd_v2_partitions[] = { + { -+ .name = "uboot", ++ .name = "u-boot", + .offset = 0, -+ .size = 0x030000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "env", -+ .offset = 0x030000, -+ .size = 0x010000, ++ .size = 0x020000, + .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "linux", -+ .offset = 0x040000, ++ }, { ++ .name = "kernel", ++ .offset = 0x020000, + .size = 0x140000, -+ } , { ++ }, { + .name = "rootfs", -+ .offset = 0x180000, -+ .size = 0x630000, -+ } , { -+ .name = "nvram", -+ .offset = 0x7b0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "factory", -+ .offset = 0x7c0000, -+ .size = 0x010000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "language", -+ .offset = 0x7d0000, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, -+ } , { -+ .name = "caldata", -+ .offset = 0x7f0000, ++ .offset = 0x160000, ++ .size = 0x290000, ++ }, { ++ .name = "art", ++ .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, -+ } , { ++ }, { + .name = "firmware", -+ .offset = 0x040000, -+ .size = 0x770000, ++ .offset = 0x020000, ++ .size = 0x3d0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data wrt400n_flash_data = { ++static struct flash_platform_data tl_wa901nd_v2_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = wrt400n_partitions, -+ .nr_parts = ARRAY_SIZE(wrt400n_partitions), ++ .parts = tl_wa901nd_v2_partitions, ++ .nr_parts = ARRAY_SIZE(tl_wa901nd_v2_partitions), +#endif +}; + -+static struct gpio_led wrt400n_leds_gpio[] __initdata = { ++static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = { + { -+ .name = "wrt400n:green:status", -+ .gpio = WRT400N_GPIO_LED_GREEN, -+ .active_low = 1, -+ }, { -+ .name = "wrt400n:amber:aoss", -+ .gpio = WRT400N_GPIO_LED_ORANGE, ++ .name = "tl-wa901nd-v2:green:system", ++ .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM, + .active_low = 1, + }, { -+ .name = "wrt400n:green:wlan", -+ .gpio = WRT400N_GPIO_LED_WLAN, -+ .active_low = 1, ++ .name = "tl-wa901nd-v2:green:qss", ++ .gpio = TL_WA901ND_V2_GPIO_LED_QSS, + }, { -+ .name = "wrt400n:green:power", -+ .gpio = WRT400N_GPIO_LED_POWER, ++ .name = "tl-wa901nd-v2:green:wlan", ++ .gpio = TL_WA901ND_V2_GPIO_LED_WLAN, + .active_low = 1, + } +}; + -+static struct gpio_button wrt400n_gpio_buttons[] __initdata = { ++static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = WRT400N_GPIO_BTN_RESET, ++ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WA901ND_V2_GPIO_BTN_RESET, + .active_low = 1, -+ } , { -+ .desc = "wlsec", ++ }, { ++ .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = WRT400N_GPIO_BTN_WLSEC, ++ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WA901ND_V2_GPIO_BTN_QSS, + .active_low = 1, + } +}; + -+static void __init wrt400n_setup(void) ++static void __init tl_wa901nd_v2_setup(void) +{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 mac[6]; -+ int i; -+ -+ memcpy(mac, art + WRT400N_MAC_ADDR_OFFSET, 6); -+ for (i = 5; i >= 3; i--) -+ if (++mac[i] != 0x00) break; ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + -+ ar71xx_set_mac_base(mac); ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_eth0_data.phy_mask = 0x00001000; + ar71xx_add_device_mdio(0x0); + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth0_data.speed = SPEED_100; -+ ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.phy_mask = 0x10; -+ ++ ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC | ++ RESET_MODULE_GE0_PHY; + ar71xx_add_device_eth(0); -+ ar71xx_add_device_eth(1); + -+ ar71xx_add_device_m25p80(&wrt400n_flash_data); ++ ar71xx_add_device_m25p80(&tl_wa901nd_v2_flash_data); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio), -+ wrt400n_leds_gpio); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio), ++ tl_wa901nd_v2_leds_gpio); + -+ ar71xx_add_device_gpio_buttons(-1, WRT400N_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(wrt400n_gpio_buttons), -+ wrt400n_gpio_buttons); ++ ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_wa901nd_v2_gpio_keys), ++ tl_wa901nd_v2_gpio_keys); + -+ ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL, -+ art + WRT400N_CALDATA1_OFFSET, NULL); ++ ar9xxx_add_device_wmac(eeprom, mac); +} + -+MIPS_MACHINE(AR71XX_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-g300nh.c linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-g300nh.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,265 @@ ++MIPS_MACHINE(AR71XX_MACH_TL_WA901ND_V2, "TL-WA901ND-v2", ++ "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr1043nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr1043nd.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c 2011-08-24 02:41:55.587990766 +0200 +@@ -0,0 +1,156 @@ +/* -+ * Buffalo WZR-HP-G300NH board support ++ * TP-LINK TL-WR1043ND board support + * -+ * Copyright (C) 2010 Gabor Juhos ++ * Copyright (C) 2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include +#include +#include -+#include -+#include -+ -+#include ++#include ++#include +#include -+#include + +#include "machtype.h" +#include "devices.h" -+#include "dev-ar913x-wmac.h" ++#include "dev-m25p80.h" ++#include "dev-ar9xxx-wmac.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + -+#define WZRHPG300NH_GPIO_LED_USB 0 -+#define WZRHPG300NH_GPIO_LED_DIAG 1 -+#define WZRHPG300NH_GPIO_LED_WIRELESS 6 -+#define WZRHPG300NH_GPIO_LED_SECURITY 17 -+#define WZRHPG300NH_GPIO_LED_ROUTER 18 -+ -+#define WZRHPG300NH_GPIO_RTL8366_SDA 19 -+#define WZRHPG300NH_GPIO_RTL8366_SCK 20 -+ -+#define WZRHPG300NH_GPIO_74HC153_S0 9 -+#define WZRHPG300NH_GPIO_74HC153_S1 11 -+#define WZRHPG300NH_GPIO_74HC153_1Y 12 -+#define WZRHPG300NH_GPIO_74HC153_2Y 14 ++#define TL_WR1043ND_GPIO_LED_USB 1 ++#define TL_WR1043ND_GPIO_LED_SYSTEM 2 ++#define TL_WR1043ND_GPIO_LED_QSS 5 ++#define TL_WR1043ND_GPIO_LED_WLAN 9 + -+#define WZRHPG300NH_GPIO_EXP_BASE 32 -+#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0) -+#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1) -+#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2) -+#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3) -+#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5) -+#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6) -+#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7) ++#define TL_WR1043ND_GPIO_BTN_RESET 3 ++#define TL_WR1043ND_GPIO_BTN_QSS 7 + -+#define WZRHPG300NH_BUTTONS_POLL_INTERVAL 20 ++#define TL_WR1043ND_GPIO_RTL8366_SDA 18 ++#define TL_WR1043ND_GPIO_RTL8366_SCK 19 + -+#define WZRHPG300NH_MAC_OFFSET 0x20c ++#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL) + +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition wzrhpg300nh_flash_partitions[] = { ++static struct mtd_partition tl_wr1043nd_partitions[] = { + { + .name = "u-boot", + .offset = 0, -+ .size = 0x0040000, -+ .mask_flags = MTD_WRITEABLE, -+ }, { -+ .name = "u-boot-env", -+ .offset = 0x0040000, -+ .size = 0x0020000, ++ .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", -+ .offset = 0x0060000, -+ .size = 0x0100000, ++ .offset = 0x020000, ++ .size = 0x140000, + }, { + .name = "rootfs", -+ .offset = 0x0160000, -+ .size = 0x1e60000, -+ }, { -+ .name = "user_property", -+ .offset = 0x1fc0000, -+ .size = 0x0020000, -+ .mask_flags = MTD_WRITEABLE, ++ .offset = 0x160000, ++ .size = 0x690000, + }, { + .name = "art", -+ .offset = 0x1fe0000, -+ .size = 0x0020000, ++ .offset = 0x7f0000, ++ .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", -+ .offset = 0x0060000, -+ .size = 0x1f60000, ++ .offset = 0x020000, ++ .size = 0x7d0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct ar91xx_flash_platform_data wzrhpg300nh_flash_data = { -+ .width = 2, ++static struct flash_platform_data tl_wr1043nd_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = wzrhpg300nh_flash_partitions, -+ .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions), ++ .parts = tl_wr1043nd_partitions, ++ .nr_parts = ARRAY_SIZE(tl_wr1043nd_partitions), +#endif +}; + -+#define WZRHPG300NH_FLASH_BASE 0x1e000000 -+#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024) -+ -+static struct resource wzrhpg300nh_flash_resources[] = { -+ [0] = { -+ .start = WZRHPG300NH_FLASH_BASE, -+ .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+}; -+ -+static struct platform_device wzrhpg300nh_flash_device = { -+ .name = "ar91xx-flash", -+ .id = -1, -+ .resource = wzrhpg300nh_flash_resources, -+ .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources), -+ .dev = { -+ .platform_data = &wzrhpg300nh_flash_data, -+ } -+}; -+ -+static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = { ++static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = { + { -+ .name = "wzr-hp-g300nh:orange:security", -+ .gpio = WZRHPG300NH_GPIO_LED_SECURITY, ++ .name = "tl-wr1043nd:green:usb", ++ .gpio = TL_WR1043ND_GPIO_LED_USB, + .active_low = 1, + }, { -+ .name = "wzr-hp-g300nh:green:wireless", -+ .gpio = WZRHPG300NH_GPIO_LED_WIRELESS, -+ .active_low = 1, -+ }, { -+ .name = "wzr-hp-g300nh:green:router", -+ .gpio = WZRHPG300NH_GPIO_LED_ROUTER, ++ .name = "tl-wr1043nd:green:system", ++ .gpio = TL_WR1043ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { -+ .name = "wzr-hp-g300nh:red:diag", -+ .gpio = WZRHPG300NH_GPIO_LED_DIAG, -+ .active_low = 1, ++ .name = "tl-wr1043nd:green:qss", ++ .gpio = TL_WR1043ND_GPIO_LED_QSS, ++ .active_low = 0, + }, { -+ .name = "wzr-hp-g300nh:blue:usb", -+ .gpio = WZRHPG300NH_GPIO_LED_USB, ++ .name = "tl-wr1043nd:green:wlan", ++ .gpio = TL_WR1043ND_GPIO_LED_WLAN, + .active_low = 1, + } +}; + -+static struct gpio_button wzrhpg300nh_gpio_buttons[] __initdata = { ++static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, -+ .threshold = 3, -+ .gpio = WZRHPG300NH_GPIO_BTN_RESET, ++ .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WR1043ND_GPIO_BTN_RESET, + .active_low = 1, + }, { -+ .desc = "aoss", ++ .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, -+ .threshold = 3, -+ .gpio = WZRHPG300NH_GPIO_BTN_AOSS, -+ .active_low = 1, -+ }, { -+ .desc = "usb", -+ .type = EV_KEY, -+ .code = BTN_2, -+ .threshold = 3, -+ .gpio = WZRHPG300NH_GPIO_BTN_USB, ++ .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WR1043ND_GPIO_BTN_QSS, + .active_low = 1, -+ }, { -+ .desc = "qos_on", -+ .type = EV_KEY, -+ .code = BTN_3, -+ .threshold = 3, -+ .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON, -+ .active_low = 0, -+ }, { -+ .desc = "qos_off", -+ .type = EV_KEY, -+ .code = BTN_4, -+ .threshold = 3, -+ .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF, -+ .active_low = 0, -+ }, { -+ .desc = "router_on", -+ .type = EV_KEY, -+ .code = BTN_5, -+ .threshold = 3, -+ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON, -+ .active_low = 0, -+ }, { -+ .desc = "router_auto", -+ .type = EV_KEY, -+ .code = BTN_6, -+ .threshold = 3, -+ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO, -+ .active_low = 0, -+ } -+}; -+ -+static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = { -+ .gpio_base = WZRHPG300NH_GPIO_EXP_BASE, -+ .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0, -+ .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1, -+ .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y, -+ .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y, -+}; -+ -+static struct platform_device wzrhpg300nh_74hc153_device = { -+ .name = NXP_74HC153_DRIVER_NAME, -+ .id = -1, -+ .dev = { -+ .platform_data = &wzrhpg300nh_74hc153_data, + } +}; + -+static struct rtl8366s_platform_data wzrhpg300nh_rtl8366s_data = { -+ .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA, -+ .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK, ++static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = { ++ .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA, ++ .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK, +}; + -+static struct platform_device wzrhpg300nh_rtl8366s_device = { -+ .name = RTL8366S_DRIVER_NAME, ++static struct platform_device tl_wr1043nd_rtl8366rb_device = { ++ .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { -+ .platform_data = &wzrhpg300nh_rtl8366s_data, ++ .platform_data = &tl_wr1043nd_rtl8366rb_data, + } +}; + -+static void __init wzrhpg300nh_setup(void) ++static void __init tl_wr1043nd_setup(void) +{ ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + -+ ar71xx_set_mac_base(eeprom + WZRHPG300NH_MAC_OFFSET); -+ -+ ar71xx_eth0_pll_data.pll_1000 = 0x1e000100; -+ ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev; + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; -+ -+ ar71xx_eth1_pll_data.pll_1000 = 0x1e000100; -+ ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ar71xx_eth1_data.phy_mask = 0x10; ++ ar71xx_eth0_pll_data.pll_1000 = 0x1a000000; + + ar71xx_add_device_eth(0); -+ ar71xx_add_device_eth(1); + + ar71xx_add_device_usb(); -+ ar913x_add_device_wmac(eeprom, NULL); + -+ platform_device_register(&wzrhpg300nh_74hc153_device); -+ platform_device_register(&wzrhpg300nh_flash_device); -+ platform_device_register(&wzrhpg300nh_rtl8366s_device); ++ ar71xx_add_device_m25p80(&tl_wr1043nd_flash_data); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio), -+ wzrhpg300nh_leds_gpio); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio), ++ tl_wr1043nd_leds_gpio); ++ ++ platform_device_register(&tl_wr1043nd_rtl8366rb_device); + -+ ar71xx_add_device_gpio_buttons(-1, WZRHPG300NH_BUTTONS_POLL_INTERVAL, -+ ARRAY_SIZE(wzrhpg300nh_gpio_buttons), -+ wzrhpg300nh_gpio_buttons); ++ ar71xx_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_wr1043nd_gpio_keys), ++ tl_wr1043nd_gpio_keys); + ++ ar9xxx_add_device_wmac(eeprom, mac); +} + -+MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH, "WZR-HP-G300NH", -+ "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/machtype.h linux-2.6.39/arch/mips/ar71xx/machtype.h ---- linux-2.6.39.orig/arch/mips/ar71xx/machtype.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/machtype.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,60 @@ ++MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND", ++ tl_wr1043nd_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr741nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr741nd.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c 2011-08-24 02:41:55.587990766 +0200 +@@ -0,0 +1,135 @@ +/* -+ * Atheros AR71xx machine type definitions ++ * TP-LINK TL-WR741ND board support + * -+ * Copyright (C) 2008-2010 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2009-2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#ifndef _AR71XX_MACHTYPE_H -+#define _AR71XX_MACHTYPE_H ++#include ++#include + -+#include ++#include + -+enum ar71xx_mach_type { -+ AR71XX_MACH_GENERIC = 0, -+ AR71XX_MACH_AP81, /* Atheros AP81 */ -+ AR71XX_MACH_AP83, /* Atheros AP83 */ -+ AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */ -+ AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ -+ AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ -+ AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ -+ AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ -+ AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ -+ AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ -+ AR71XX_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ -+ AR71XX_MACH_RB_450, /* MikroTik RouterBOARD 450 */ -+ AR71XX_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ -+ AR71XX_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ -+ AR71XX_MACH_RB_750, /* MikroTik RouterBOARD 750 */ -+ AR71XX_MACH_PB42, /* Atheros PB42 */ -+ AR71XX_MACH_PB44, /* Atheros PB44 */ -+ AR71XX_MACH_PB92, /* Atheros PB92 */ -+ AR71XX_MACH_MZK_W04NU, /* Planex MZK-W04NU */ -+ AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */ -+ AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ -+ AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ -+ AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ -+ AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ -+ AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ -+ AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */ -+ AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ -+ AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */ -+ AR71XX_MACH_UBNT_RS, /* Ubiquiti RouterStation */ -+ AR71XX_MACH_UBNT_AR71XX, /* Ubiquiti AR71xx-based board */ -+ AR71XX_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ -+ AR71XX_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ -+ AR71XX_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ -+ AR71XX_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ -+ AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700 */ -+ AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */ -+ AR71XX_MACH_WP543, /* Compex WP543 */ -+ AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */ -+ AR71XX_MACH_WRT400N, /* Linksys WRT400N */ -+ AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ ++#include "machtype.h" ++#include "devices.h" ++#include "dev-m25p80.h" ++#include "dev-ap91-pci.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++ ++#define TL_WR741ND_GPIO_LED_QSS 0 ++#define TL_WR741ND_GPIO_LED_SYSTEM 1 ++ ++#define TL_WR741ND_GPIO_BTN_RESET 11 ++#define TL_WR741ND_GPIO_BTN_QSS 12 ++ ++#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL) ++ ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition tl_wr741nd_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "kernel", ++ .offset = 0x020000, ++ .size = 0x140000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x160000, ++ .size = 0x290000, ++ }, { ++ .name = "art", ++ .offset = 0x3f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x020000, ++ .size = 0x3d0000, ++ } +}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+#endif /* _AR71XX_MACHTYPE_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/nvram.c linux-2.6.39/arch/mips/ar71xx/nvram.c ---- linux-2.6.39.orig/arch/mips/ar71xx/nvram.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/nvram.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,75 @@ -+/* -+ * Atheros AR71xx minimal nvram support -+ * -+ * Copyright (C) 2009 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++static struct flash_platform_data tl_wr741nd_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = tl_wr741nd_partitions, ++ .nr_parts = ARRAY_SIZE(tl_wr741nd_partitions), ++#endif ++}; + -+#include -+#include -+#include -+#include -+#include ++static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = { ++ { ++ .name = "tl-wr741nd:green:system", ++ .gpio = TL_WR741ND_GPIO_LED_SYSTEM, ++ .active_low = 1, ++ }, { ++ .name = "tl-wr741nd:green:qss", ++ .gpio = TL_WR741ND_GPIO_LED_QSS, ++ .active_low = 1, ++ } ++}; + -+#include "nvram.h" ++static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WR741ND_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, { ++ .desc = "qss", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WR741ND_GPIO_BTN_QSS, ++ .active_low = 1, ++ } ++}; + -+char *nvram_find_var(const char *name, const char *buf, unsigned buf_len) ++static void __init tl_wr741nd_setup(void) +{ -+ unsigned len = strlen(name); -+ char *cur, *last; ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + -+ if (buf_len == 0 || len == 0) -+ return NULL; ++ ar71xx_add_device_m25p80(&tl_wr741nd_flash_data); + -+ if (buf_len < len) -+ return NULL; ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio), ++ tl_wr741nd_leds_gpio); + -+ if (len == 1) -+ return memchr(buf, (int) *name, buf_len); ++ ar71xx_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_wr741nd_gpio_keys), ++ tl_wr741nd_gpio_keys); + -+ last = (char *) buf + buf_len - len; -+ for (cur = (char *) buf; cur <= last; cur++) -+ if (cur[0] == name[0] && memcmp(cur, name, len) == 0) -+ return cur + len; -+ -+ return NULL; -+} -+ -+int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, -+ const char *name, char *mac) -+{ -+ char *buf; -+ char *mac_str; -+ int ret; -+ int t; -+ -+ buf = vmalloc(nvram_len); -+ if (!buf) -+ return -ENOMEM; -+ -+ memcpy(buf, nvram, nvram_len); -+ buf[nvram_len - 1] = '\0'; ++ ar71xx_eth1_data.has_ar7240_switch = 1; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + -+ mac_str = nvram_find_var(name, buf, nvram_len); -+ if (!mac_str) { -+ ret = -EINVAL; -+ goto free; -+ } ++ /* WAN port */ ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.phy_mask = BIT(4); + -+ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", -+ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); ++ /* LAN ports */ ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; + -+ if (t != 6) { -+ ret = -EINVAL; -+ goto free; -+ } ++ ar71xx_add_device_mdio(0x0); ++ ar71xx_add_device_eth(1); ++ ar71xx_add_device_eth(0); + -+ ret = 0; ++ ap91_pci_setup_wmac_led_pin(1); + -+ free: -+ vfree(buf); -+ return ret; ++ ap91_pci_init(ee, mac); +} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/nvram.h linux-2.6.39/arch/mips/ar71xx/nvram.h ---- linux-2.6.39.orig/arch/mips/ar71xx/nvram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/nvram.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,19 @@ ++MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND", ++ tl_wr741nd_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr841n.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr841n.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c 2011-08-24 02:41:55.597982750 +0200 +@@ -0,0 +1,144 @@ +/* -+ * Atheros AR71xx minimal nvram support ++ * TP-LINK TL-WR841N board support + * + * Copyright (C) 2009 Gabor Juhos + * @@ -7545,7553 +7700,8833 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/nvram.h linux-2.6.39/arch/mips/ar71 + * by the Free Software Foundation. + */ + -+#ifndef _AR71XX_NVRAM_H -+#define _AR71XX_NVRAM_H -+ -+char *nvram_find_var(const char *name, const char *buf, -+ unsigned buf_len) __init; -+int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, -+ const char *name, char *mac) __init; ++#include ++#include + -+#endif /* _AR71XX_NVRAM_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci.c linux-2.6.39/arch/mips/ar71xx/pci.c ---- linux-2.6.39.orig/arch/mips/ar71xx/pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/pci.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,93 @@ -+/* -+ * Atheros AR71xx PCI setup code -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++#include + -+#include ++#include "machtype.h" ++#include "devices.h" ++#include "dev-dsa.h" ++#include "dev-m25p80.h" ++#include "dev-gpio-buttons.h" ++#include "dev-pb42-pci.h" ++#include "dev-leds-gpio.h" + -+#include ++#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2 ++#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4 ++#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5 + -+#include -+#include ++#define TL_WR841ND_V1_GPIO_BTN_RESET 3 ++#define TL_WR841ND_V1_GPIO_BTN_QSS 7 + -+unsigned ar71xx_pci_nr_irqs __initdata; -+struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata; ++#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \ ++ (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL) + -+int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev); ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition tl_wr841n_v1_partitions[] = { ++ { ++ .name = "redboot", ++ .offset = 0, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "kernel", ++ .offset = 0x020000, ++ .size = 0x140000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x160000, ++ .size = 0x280000, ++ }, { ++ .name = "config", ++ .offset = 0x3e0000, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x020000, ++ .size = 0x3c0000, ++ } ++}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+static int ar71xx_be_handler(struct pt_regs *regs, int is_fixup) -+{ -+ int err = 0; ++static struct flash_platform_data tl_wr841n_v1_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = tl_wr841n_v1_partitions, ++ .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions), ++#endif ++}; + -+ err = ar71xx_pci_be_handler(is_fixup); ++static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = { ++ { ++ .name = "tl-wr841n:green:system", ++ .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM, ++ .active_low = 1, ++ }, { ++ .name = "tl-wr841n:red:qss", ++ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED, ++ }, { ++ .name = "tl-wr841n:green:qss", ++ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN, ++ } ++}; + -+ return (is_fixup && !err) ? MIPS_BE_FIXUP : MIPS_BE_FATAL; -+} ++static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WR841ND_V1_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, { ++ .desc = "qss", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WR841ND_V1_GPIO_BTN_QSS, ++ .active_low = 1, ++ } ++}; + -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ if (ar71xx_pci_plat_dev_init) -+ return ar71xx_pci_plat_dev_init(dev); ++static struct dsa_chip_data tl_wr841n_v1_dsa_chip = { ++ .port_names[0] = "wan", ++ .port_names[1] = "lan1", ++ .port_names[2] = "lan2", ++ .port_names[3] = "lan3", ++ .port_names[4] = "lan4", ++ .port_names[5] = "cpu", ++}; + -+ return 0; -+} ++static struct dsa_platform_data tl_wr841n_v1_dsa_data = { ++ .nr_chips = 1, ++ .chip = &tl_wr841n_v1_dsa_chip, ++}; + -+int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) ++static void __init tl_wr841n_v1_setup(void) +{ -+ int ret = 0; -+ -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ ret = ar71xx_pcibios_map_irq(dev, slot, pin); -+ break; -+ -+ case AR71XX_SOC_AR7240: -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ ret = ar724x_pcibios_map_irq(dev, slot, pin); -+ break; ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + -+ default: -+ break; -+ } ++ ar71xx_add_device_mdio(0x0); + -+ return ret; -+} ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; + -+int __init ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) -+{ -+ int ret = 0; ++ ar71xx_add_device_eth(0); + -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ board_be_handler = ar71xx_be_handler; -+ ret = ar71xx_pcibios_init(); -+ break; ++ ar71xx_add_device_dsa(0, &tl_wr841n_v1_dsa_data); + -+ case AR71XX_SOC_AR7240: -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ ret = ar724x_pcibios_init(); -+ break; ++ ar71xx_add_device_m25p80(&tl_wr841n_v1_flash_data); + -+ default: -+ return 0; -+ } ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio), ++ tl_wr841n_v1_leds_gpio); + -+ ar71xx_pci_nr_irqs = nr_irqs; -+ ar71xx_pci_irq_map = map; ++ ar71xx_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_wr841n_v1_gpio_keys), ++ tl_wr841n_v1_gpio_keys); + -+ return ret; ++ pb42_pci_init(); +} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/prom.c linux-2.6.39/arch/mips/ar71xx/prom.c ---- linux-2.6.39.orig/arch/mips/ar71xx/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/prom.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,105 @@ ++ ++MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1", ++ tl_wr841n_v1_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr941nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr941nd.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c 2011-08-24 02:41:55.597982750 +0200 +@@ -0,0 +1,147 @@ +/* -+ * Atheros AR71xx SoC specific prom routines ++ * TP-LINK TL-WR941ND board support + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2009-2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include -+#include -+#include -+ -+#include -+#include ++#include ++#include + +#include + -+static inline int is_valid_ram_addr(void *addr) -+{ -+ if (((u32) addr > KSEG0) && -+ ((u32) addr < (KSEG0 + AR71XX_MEM_SIZE_MAX))) -+ return 1; -+ -+ if (((u32) addr > KSEG1) && -+ ((u32) addr < (KSEG1 + AR71XX_MEM_SIZE_MAX))) -+ return 1; -+ -+ return 0; -+} ++#include "machtype.h" ++#include "devices.h" ++#include "dev-dsa.h" ++#include "dev-m25p80.h" ++#include "dev-ar9xxx-wmac.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" + -+static void __init ar71xx_prom_append_cmdline(const char *name, -+ const char *value) -+{ -+ char buf[COMMAND_LINE_SIZE]; ++#define TL_WR941ND_GPIO_LED_SYSTEM 2 ++#define TL_WR941ND_GPIO_LED_QSS_RED 4 ++#define TL_WR941ND_GPIO_LED_QSS_GREEN 5 ++#define TL_WR941ND_GPIO_LED_WLAN 9 + -+ snprintf(buf, sizeof(buf), " %s=%s", name, value); -+ strlcat(arcs_cmdline, buf, sizeof(arcs_cmdline)); -+} ++#define TL_WR941ND_GPIO_BTN_RESET 3 ++#define TL_WR941ND_GPIO_BTN_QSS 7 + -+static void __init ar71xx_prom_find_env(char **envp, const char *name) -+{ -+ int len = strlen(name); -+ char **p; ++#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL) + -+ if (!is_valid_ram_addr(envp)) -+ return; ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition tl_wr941nd_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "kernel", ++ .offset = 0x020000, ++ .size = 0x140000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x160000, ++ .size = 0x290000, ++ }, { ++ .name = "art", ++ .offset = 0x3f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x020000, ++ .size = 0x3d0000, ++ } ++}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+ for (p = envp; is_valid_ram_addr(*p); p++) { -+ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') { -+ ar71xx_prom_append_cmdline(name, *p + len + 1); -+ break; -+ } ++static struct flash_platform_data tl_wr941nd_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = tl_wr941nd_partitions, ++ .nr_parts = ARRAY_SIZE(tl_wr941nd_partitions), ++#endif ++}; + -+ /* RedBoot env comes in pointer pairs - key, value */ -+ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0) -+ if (is_valid_ram_addr(*(++p))) { -+ ar71xx_prom_append_cmdline(name, *p); -+ break; -+ } ++static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = { ++ { ++ .name = "tl-wr941nd:green:system", ++ .gpio = TL_WR941ND_GPIO_LED_SYSTEM, ++ .active_low = 1, ++ }, { ++ .name = "tl-wr941nd:red:qss", ++ .gpio = TL_WR941ND_GPIO_LED_QSS_RED, ++ }, { ++ .name = "tl-wr941nd:green:qss", ++ .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN, ++ }, { ++ .name = "tl-wr941nd:green:wlan", ++ .gpio = TL_WR941ND_GPIO_LED_WLAN, ++ .active_low = 1, + } -+} ++}; + -+static int inline ar71xx_use__image_cmdline(void) { return 0; } ++static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WR941ND_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, { ++ .desc = "qss", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WR941ND_GPIO_BTN_QSS, ++ .active_low = 1, ++ } ++}; + -+static __init void ar71xx_prom_init_cmdline(int argc, char **argv) -+{ -+ int i; ++static struct dsa_chip_data tl_wr941nd_dsa_chip = { ++ .port_names[0] = "wan", ++ .port_names[1] = "lan1", ++ .port_names[2] = "lan2", ++ .port_names[3] = "lan3", ++ .port_names[4] = "lan4", ++ .port_names[5] = "cpu", ++}; + -+ if (ar71xx_use__image_cmdline()) -+ return; ++static struct dsa_platform_data tl_wr941nd_dsa_data = { ++ .nr_chips = 1, ++ .chip = &tl_wr941nd_dsa_chip, ++}; + -+ if (!is_valid_ram_addr(argv)) -+ return; ++static void __init tl_wr941nd_setup(void) ++{ ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + -+ for (i = 0; i < argc; i++) -+ if (is_valid_ram_addr(argv[i])) { -+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); -+ strlcat(arcs_cmdline, argv[i], sizeof(arcs_cmdline)); -+ } -+} ++ ar71xx_add_device_mdio(0x0); + -+void __init prom_init(void) -+{ -+ char **envp; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; + -+ printk(KERN_DEBUG "prom: fw_arg0=%08x, fw_arg1=%08x, " -+ "fw_arg2=%08x, fw_arg3=%08x\n", -+ (unsigned int)fw_arg0, (unsigned int)fw_arg1, -+ (unsigned int)fw_arg2, (unsigned int)fw_arg3); ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data); + ++ ar71xx_add_device_m25p80(&tl_wr941nd_flash_data); + -+ ar71xx_prom_init_cmdline(fw_arg0, (char **)fw_arg1); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio), ++ tl_wr941nd_leds_gpio); + -+ envp = (char **)fw_arg2; -+ ar71xx_prom_find_env(envp, "board"); ++ ar71xx_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_wr941nd_gpio_keys), ++ tl_wr941nd_gpio_keys); ++ ar9xxx_add_device_wmac(eeprom, mac); +} + -+void __init prom_free_prom_memory(void) -+{ -+ /* We do not have to prom memory to free */ -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/setup.c linux-2.6.39/arch/mips/ar71xx/setup.c ---- linux-2.6.39.orig/arch/mips/ar71xx/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/setup.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,310 @@ ++MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND", ++ tl_wr941nd_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/machtype.h linux-2.6.39/arch/mips/ar71xx/machtype.h +--- linux-2.6.39.orig/arch/mips/ar71xx/machtype.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/machtype.h 2011-08-24 02:41:55.597982750 +0200 +@@ -0,0 +1,75 @@ +/* -+ * Atheros AR71xx SoC specific setup ++ * Atheros AR71xx machine type definitions + * -+ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008-2010 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include -+#include ++#ifndef _AR71XX_MACHTYPE_H ++#define _AR71XX_MACHTYPE_H + -+#include -+#include /* for mips_hpt_frequency */ -+#include /* for _machine_{restart,halt} */ +#include + ++enum ar71xx_mach_type { ++ AR71XX_MACH_GENERIC = 0, ++ AR71XX_MACH_AP121, /* Atheros AP121 */ ++ AR71XX_MACH_AP121_MINI, /* Atheros AP121-MINI */ ++ AR71XX_MACH_AP81, /* Atheros AP81 */ ++ AR71XX_MACH_AP83, /* Atheros AP83 */ ++ AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */ ++ AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ ++ AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ ++ AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ ++ AR71XX_MACH_JA76PF, /* jjPlus JA76PF */ ++ AR71XX_MACH_JWAP003, /* jjPlus JWAP003 */ ++ AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ ++ AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ ++ AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ ++ AR71XX_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ ++ AR71XX_MACH_RB_450, /* MikroTik RouterBOARD 450 */ ++ AR71XX_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ ++ AR71XX_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ ++ AR71XX_MACH_RB_750, /* MikroTik RouterBOARD 750 */ ++ AR71XX_MACH_PB42, /* Atheros PB42 */ ++ AR71XX_MACH_PB44, /* Atheros PB44 */ ++ AR71XX_MACH_PB92, /* Atheros PB92 */ ++ AR71XX_MACH_MZK_W04NU, /* Planex MZK-W04NU */ ++ AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */ ++ AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ ++ AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ ++ AR71XX_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ ++ AR71XX_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ ++ AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ ++ AR71XX_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ ++ AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ ++ AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ ++ AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ ++ AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */ ++ AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ ++ AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */ ++ AR71XX_MACH_UBNT_RS, /* Ubiquiti RouterStation */ ++ AR71XX_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ ++ AR71XX_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ ++ AR71XX_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ ++ AR71XX_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ ++ AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700 */ ++ AR71XX_MACH_WNDR3700V2, /* NETGEAR WNDR3700v2 */ ++ AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */ ++ AR71XX_MACH_WP543, /* Compex WP543 */ ++ AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */ ++ AR71XX_MACH_WRT400N, /* Linksys WRT400N */ ++ AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ ++ AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ ++ AR71XX_MACH_EAP7660D, /* Senao EAP7660D */ ++ AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ ++ AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ ++ AR71XX_MACH_AP96, /* Atheros AP96 */ ++ AR71XX_MACH_UBNT_UNIFI, /* Unifi */ ++ AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */ ++}; ++ ++#endif /* _AR71XX_MACHTYPE_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ubnt.c linux-2.6.39/arch/mips/ar71xx/mach-ubnt.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-ubnt.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ubnt.c 2011-08-24 02:41:55.597982750 +0200 +@@ -0,0 +1,333 @@ ++/* ++ * Ubiquiti RouterStation support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2008 Ubiquiti ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ +#include + +#include "machtype.h" +#include "devices.h" ++#include "dev-m25p80.h" ++#include "dev-ap91-pci.h" ++#include "dev-gpio-buttons.h" ++#include "dev-pb42-pci.h" ++#include "dev-leds-gpio.h" ++#include "dev-usb.h" + -+#define AR71XX_SYS_TYPE_LEN 64 -+#define AR71XX_BASE_FREQ 40000000 -+#define AR91XX_BASE_FREQ 5000000 -+#define AR724X_BASE_FREQ 5000000 -+ -+u32 ar71xx_cpu_freq; -+EXPORT_SYMBOL_GPL(ar71xx_cpu_freq); ++#define UBNT_RS_GPIO_LED_RF 2 ++#define UBNT_RS_GPIO_SW4 8 + -+u32 ar71xx_ahb_freq; -+EXPORT_SYMBOL_GPL(ar71xx_ahb_freq); ++#define UBNT_LS_SR71_GPIO_LED_D25 0 ++#define UBNT_LS_SR71_GPIO_LED_D26 1 ++#define UBNT_LS_SR71_GPIO_LED_D24 2 ++#define UBNT_LS_SR71_GPIO_LED_D23 4 ++#define UBNT_LS_SR71_GPIO_LED_D22 5 ++#define UBNT_LS_SR71_GPIO_LED_D27 6 ++#define UBNT_LS_SR71_GPIO_LED_D28 7 + -+u32 ar71xx_ddr_freq; -+EXPORT_SYMBOL_GPL(ar71xx_ddr_freq); -+ -+enum ar71xx_soc_type ar71xx_soc; -+EXPORT_SYMBOL_GPL(ar71xx_soc); ++#define UBNT_M_GPIO_LED_L1 0 ++#define UBNT_M_GPIO_LED_L2 1 ++#define UBNT_M_GPIO_LED_L3 11 ++#define UBNT_M_GPIO_LED_L4 7 ++#define UBNT_M_GPIO_BTN_RESET 12 + -+static char ar71xx_sys_type[AR71XX_SYS_TYPE_LEN]; ++#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL) + -+static void ar71xx_restart(char *command) -+{ -+ ar71xx_device_stop(RESET_MODULE_FULL_CHIP); -+ for (;;) -+ if (cpu_wait) -+ cpu_wait(); -+} ++static struct gpio_led ubnt_rs_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:green:rf", ++ .gpio = UBNT_RS_GPIO_LED_RF, ++ .active_low = 0, ++ } ++}; + -+static void ar71xx_halt(void) -+{ -+ while (1) -+ cpu_wait(); -+} ++static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:green:d22", ++ .gpio = UBNT_LS_SR71_GPIO_LED_D22, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:d23", ++ .gpio = UBNT_LS_SR71_GPIO_LED_D23, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:d24", ++ .gpio = UBNT_LS_SR71_GPIO_LED_D24, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:red:d25", ++ .gpio = UBNT_LS_SR71_GPIO_LED_D25, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:red:d26", ++ .gpio = UBNT_LS_SR71_GPIO_LED_D26, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:d27", ++ .gpio = UBNT_LS_SR71_GPIO_LED_D27, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:d28", ++ .gpio = UBNT_LS_SR71_GPIO_LED_D28, ++ .active_low = 0, ++ } ++}; + -+static void __init ar71xx_detect_mem_size(void) -+{ -+ unsigned long size; ++static struct gpio_led ubnt_m_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:red:link1", ++ .gpio = UBNT_M_GPIO_LED_L1, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:orange:link2", ++ .gpio = UBNT_M_GPIO_LED_L2, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:link3", ++ .gpio = UBNT_M_GPIO_LED_L3, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:link4", ++ .gpio = UBNT_M_GPIO_LED_L4, ++ .active_low = 0, ++ } ++}; + -+ for (size = AR71XX_MEM_SIZE_MIN; size < AR71XX_MEM_SIZE_MAX; -+ size <<= 1 ) { -+ if (!memcmp(ar71xx_detect_mem_size, -+ ar71xx_detect_mem_size + size, 1024)) -+ break; ++static struct gpio_keys_button ubnt_gpio_keys[] __initdata = { ++ { ++ .desc = "sw4", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = UBNT_RS_GPIO_SW4, ++ .active_low = 1, + } ++}; + -+ add_memory_region(0, size, BOOT_MEM_RAM); -+} ++static struct gpio_keys_button ubnt_m_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = UBNT_M_GPIO_BTN_RESET, ++ .active_low = 1, ++ } ++}; + -+static void __init ar71xx_detect_sys_type(void) ++static void __init ubnt_generic_setup(void) +{ -+ char *chip = "????"; -+ u32 id; -+ u32 major; -+ u32 minor; -+ u32 rev = 0; ++ ar71xx_add_device_m25p80(NULL); + -+ id = ar71xx_reset_rr(AR71XX_RESET_REG_REV_ID); -+ major = id & REV_ID_MAJOR_MASK; ++ ar71xx_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_gpio_keys), ++ ubnt_gpio_keys); + -+ switch (major) { -+ case REV_ID_MAJOR_AR71XX: -+ minor = id & AR71XX_REV_ID_MINOR_MASK; -+ rev = id >> AR71XX_REV_ID_REVISION_SHIFT; -+ rev &= AR71XX_REV_ID_REVISION_MASK; -+ switch (minor) { -+ case AR71XX_REV_ID_MINOR_AR7130: -+ ar71xx_soc = AR71XX_SOC_AR7130; -+ chip = "7130"; -+ break; ++ pb42_pci_init(); ++} + -+ case AR71XX_REV_ID_MINOR_AR7141: -+ ar71xx_soc = AR71XX_SOC_AR7141; -+ chip = "7141"; -+ break; ++/* ++ * There is Secondary MAC address duplicate problem with some UBNT HW batches. ++ * Do not increase Secondary MAC address by 1 but do workaround ++ * with 'Locally Administrated' bit. ++ */ ++static void __init ubnt_init_secondary_mac(unsigned char *mac_base) ++{ ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_base, 0); ++ ar71xx_eth1_data.mac_addr[0] |= 0x02; ++} + -+ case AR71XX_REV_ID_MINOR_AR7161: -+ ar71xx_soc = AR71XX_SOC_AR7161; -+ chip = "7161"; -+ break; -+ } -+ break; ++#define UBNT_RS_WAN_PHYMASK BIT(20) ++#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19)) + -+ case REV_ID_MAJOR_AR7240: -+ ar71xx_soc = AR71XX_SOC_AR7240; -+ chip = "7240"; -+ rev = (id & AR724X_REV_ID_REVISION_MASK); -+ break; ++static void __init ubnt_rs_setup(void) ++{ ++ ubnt_generic_setup(); + -+ case REV_ID_MAJOR_AR7241: -+ ar71xx_soc = AR71XX_SOC_AR7241; -+ chip = "7241"; -+ rev = (id & AR724X_REV_ID_REVISION_MASK); -+ break; ++ ar71xx_add_device_mdio(~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK)); + -+ case REV_ID_MAJOR_AR7242: -+ ar71xx_soc = AR71XX_SOC_AR7242; -+ chip = "7242"; -+ rev = (id & AR724X_REV_ID_REVISION_MASK); -+ break; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK; + -+ case REV_ID_MAJOR_AR913X: -+ minor = id & AR91XX_REV_ID_MINOR_MASK; -+ rev = id >> AR91XX_REV_ID_REVISION_SHIFT; -+ rev &= AR91XX_REV_ID_REVISION_MASK; -+ switch (minor) { -+ case AR91XX_REV_ID_MINOR_AR9130: -+ ar71xx_soc = AR71XX_SOC_AR9130; -+ chip = "9130"; -+ break; ++ ubnt_init_secondary_mac(ar71xx_mac_base); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.speed = SPEED_100; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; + -+ case AR91XX_REV_ID_MINOR_AR9132: -+ ar71xx_soc = AR71XX_SOC_AR9132; -+ chip = "9132"; -+ break; -+ } -+ break; ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+ default: -+ panic("ar71xx: unknown chip id:0x%08x\n", id); -+ } ++ ar71xx_add_device_usb(); + -+ sprintf(ar71xx_sys_type, "Atheros AR%s rev %u", chip, rev); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), ++ ubnt_rs_leds_gpio); +} + -+static void __init ar91xx_detect_sys_frequency(void) ++MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation", ++ ubnt_rs_setup); ++ ++#define UBNT_RSPRO_WAN_PHYMASK BIT(4) ++#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) ++ ++static void __init ubnt_rspro_setup(void) +{ -+ u32 pll; -+ u32 freq; -+ u32 div; ++ ubnt_generic_setup(); + -+ pll = ar71xx_pll_rr(AR91XX_PLL_REG_CPU_CONFIG); ++ ar71xx_add_device_mdio(~(UBNT_RSPRO_WAN_PHYMASK | ++ UBNT_RSPRO_LAN_PHYMASK)); + -+ div = ((pll >> AR91XX_PLL_DIV_SHIFT) & AR91XX_PLL_DIV_MASK); -+ freq = div * AR91XX_BASE_FREQ; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK; + -+ ar71xx_cpu_freq = freq; ++ ubnt_init_secondary_mac(ar71xx_mac_base); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; + -+ div = ((pll >> AR91XX_DDR_DIV_SHIFT) & AR91XX_DDR_DIV_MASK) + 1; -+ ar71xx_ddr_freq = freq / div; ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+ div = (((pll >> AR91XX_AHB_DIV_SHIFT) & AR91XX_AHB_DIV_MASK) + 1) * 2; -+ ar71xx_ahb_freq = ar71xx_cpu_freq / div; ++ ar71xx_add_device_usb(); ++ ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio), ++ ubnt_rs_leds_gpio); +} + -+static void __init ar71xx_detect_sys_frequency(void) ++MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro", ++ ubnt_rspro_setup); ++ ++static void __init ubnt_lsx_setup(void) +{ -+ u32 pll; -+ u32 freq; -+ u32 div; ++ ubnt_generic_setup(); ++} + -+ pll = ar71xx_pll_rr(AR71XX_PLL_REG_CPU_CONFIG); ++MIPS_MACHINE(AR71XX_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup); + -+ div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1; -+ freq = div * AR71XX_BASE_FREQ; ++#define UBNT_LSSR71_PHY_MASK BIT(1) + -+ div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1; -+ ar71xx_cpu_freq = freq / div; ++static void __init ubnt_lssr71_setup(void) ++{ ++ ubnt_generic_setup(); + -+ div = ((pll >> AR71XX_DDR_DIV_SHIFT) & AR71XX_DDR_DIV_MASK) + 1; -+ ar71xx_ddr_freq = freq / div; ++ ar71xx_add_device_mdio(~UBNT_LSSR71_PHY_MASK); + -+ div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2; -+ ar71xx_ahb_freq = ar71xx_cpu_freq / div; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK; ++ ++ ar71xx_add_device_eth(0); ++ ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio), ++ ubnt_ls_sr71_leds_gpio); +} + -+static void __init ar724x_detect_sys_frequency(void) ++MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71", ++ ubnt_lssr71_setup); ++ ++#define UBNT_M_WAN_PHYMASK BIT(4) ++ ++static void __init ubnt_m_setup(void) +{ -+ u32 pll; -+ u32 freq; -+ u32 div; ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + -+ pll = ar71xx_pll_rr(AR724X_PLL_REG_CPU_CONFIG); ++ ar71xx_add_device_m25p80(NULL); + -+ div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK); -+ freq = div * AR724X_BASE_FREQ; ++ ar71xx_add_device_mdio(~UBNT_M_WAN_PHYMASK); + -+ div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK); -+ freq *= div; -+ -+ ar71xx_cpu_freq = freq; -+ -+ div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1; -+ ar71xx_ddr_freq = freq / div; -+ -+ div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2; -+ ar71xx_ahb_freq = ar71xx_cpu_freq / div; -+} ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.phy_mask = UBNT_M_WAN_PHYMASK; + -+static void __init detect_sys_frequency(void) -+{ -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ ar71xx_detect_sys_frequency(); -+ break; ++ ar71xx_add_device_eth(0); + -+ case AR71XX_SOC_AR7240: -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ ar724x_detect_sys_frequency(); -+ break; ++ ap91_pci_init(ee, NULL); + -+ case AR71XX_SOC_AR9130: -+ case AR71XX_SOC_AR9132: -+ ar91xx_detect_sys_frequency(); -+ break; ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio), ++ ubnt_m_leds_gpio); + -+ default: -+ BUG(); -+ } ++ ar71xx_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(ubnt_m_gpio_keys), ++ ubnt_m_gpio_keys); +} + -+const char *get_system_type(void) ++static void __init ubnt_rocket_m_setup(void) +{ -+ return ar71xx_sys_type; ++ ubnt_m_setup(); ++ ar71xx_add_device_usb(); +} + -+unsigned int __cpuinit get_c0_compare_irq(void) -+{ -+ return CP0_LEGACY_COMPARE_IRQ; -+} ++MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", ++ ubnt_m_setup); ++MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", ++ ubnt_rocket_m_setup); + -+void __init plat_mem_setup(void) ++/* TODO detect the second ethernet port and use one ++ init function for all Ubiquiti MIMO series products */ ++static void __init ubnt_nano_m_setup(void) +{ -+ set_io_port_base(KSEG1); -+ -+ ar71xx_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE, -+ AR71XX_DDR_CTRL_SIZE); -+ -+ ar71xx_pll_base = ioremap_nocache(AR71XX_PLL_BASE, -+ AR71XX_PLL_SIZE); -+ -+ ar71xx_reset_base = ioremap_nocache(AR71XX_RESET_BASE, -+ AR71XX_RESET_SIZE); -+ -+ ar71xx_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); ++ ubnt_m_setup(); + -+ ar71xx_usb_ctrl_base = ioremap_nocache(AR71XX_USB_CTRL_BASE, -+ AR71XX_USB_CTRL_SIZE); ++ ar71xx_eth1_data.has_ar7240_switch = 1; ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; + -+ ar71xx_detect_mem_size(); -+ ar71xx_detect_sys_type(); -+ detect_sys_frequency(); ++ ar71xx_add_device_eth(1); ++} + -+ printk(KERN_INFO -+ "%s, CPU:%u.%03u MHz, AHB:%u.%03u MHz, DDR:%u.%03u MHz\n", -+ ar71xx_sys_type, -+ ar71xx_cpu_freq / 1000000, (ar71xx_cpu_freq / 1000) % 1000, -+ ar71xx_ahb_freq / 1000000, (ar71xx_ahb_freq / 1000) % 1000, -+ ar71xx_ddr_freq / 1000000, (ar71xx_ddr_freq / 1000) % 1000); ++MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", ++ ubnt_nano_m_setup); + -+ _machine_restart = ar71xx_restart; -+ _machine_halt = ar71xx_halt; -+ pm_power_off = ar71xx_halt; -+} ++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { ++ { ++ .name = "ubnt:orange:dome", ++ .gpio = 1, ++ .active_low = 0, ++ }, { ++ .name = "ubnt:green:dome", ++ .gpio = 0, ++ .active_low = 0, ++ } ++}; + -+void __init plat_time_init(void) ++static void __init ubnt_unifi_setup(void) +{ -+ mips_hpt_frequency = ar71xx_cpu_freq / 2; -+} ++ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + -+__setup("board=", mips_machtype_setup); ++ ar71xx_add_device_m25p80(NULL); + -+static int __init ar71xx_machine_setup(void) -+{ -+ ar71xx_gpio_init(); ++ ar71xx_add_device_mdio(~UBNT_M_WAN_PHYMASK); + -+ ar71xx_add_device_uart(); -+ ar71xx_add_device_wdt(); ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.phy_mask = UBNT_M_WAN_PHYMASK; + -+ mips_machine_setup(); -+ return 0; -+} ++ ar71xx_add_device_eth(0); + -+arch_initcall(ar71xx_machine_setup); ++ ap91_pci_init(ee, NULL); + -+static void __init ar71xx_generic_init(void) -+{ -+ /* Nothing to do */ ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), ++ ubnt_unifi_leds_gpio); +} + -+MIPS_MACHINE(AR71XX_MACH_GENERIC, "Generic", "Generic AR71xx board", -+ ar71xx_generic_init); -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,514 @@ ++MIPS_MACHINE(AR71XX_MACH_UBNT_UNIFI, "UBNT-XM", "Ubiquiti UniFi", ++ ubnt_unifi_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wndr3700.c linux-2.6.39/arch/mips/ar71xx/mach-wndr3700.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-wndr3700.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wndr3700.c 2011-08-24 02:41:55.607980283 +0200 +@@ -0,0 +1,290 @@ +/* -+ * Atheros AR71xx SoC specific definitions -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Netgear WNDR3700 board support + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Copyright (C) 2009 Marco Porsch ++ * Copyright (C) 2009-2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#ifndef __ASM_MACH_AR71XX_H -+#define __ASM_MACH_AR71XX_H -+ -+#include -+#include -+#include -+#include -+ -+#ifndef __ASSEMBLER__ -+ -+#define AR71XX_PCI_MEM_BASE 0x10000000 -+#define AR71XX_PCI_MEM_SIZE 0x08000000 -+#define AR71XX_APB_BASE 0x18000000 -+#define AR71XX_GE0_BASE 0x19000000 -+#define AR71XX_GE0_SIZE 0x01000000 -+#define AR71XX_GE1_BASE 0x1a000000 -+#define AR71XX_GE1_SIZE 0x01000000 -+#define AR71XX_EHCI_BASE 0x1b000000 -+#define AR71XX_EHCI_SIZE 0x01000000 -+#define AR71XX_OHCI_BASE 0x1c000000 -+#define AR71XX_OHCI_SIZE 0x01000000 -+#define AR7240_OHCI_BASE 0x1b000000 -+#define AR7240_OHCI_SIZE 0x01000000 -+#define AR71XX_SPI_BASE 0x1f000000 -+#define AR71XX_SPI_SIZE 0x01000000 -+ -+#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) -+#define AR71XX_DDR_CTRL_SIZE 0x10000 -+#define AR71XX_CPU_BASE (AR71XX_APB_BASE + 0x00010000) -+#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) -+#define AR71XX_UART_SIZE 0x10000 -+#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) -+#define AR71XX_USB_CTRL_SIZE 0x10000 -+#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) -+#define AR71XX_GPIO_SIZE 0x10000 -+#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) -+#define AR71XX_PLL_SIZE 0x10000 -+#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) -+#define AR71XX_RESET_SIZE 0x10000 -+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) -+#define AR71XX_MII_SIZE 0x10000 -+#define AR71XX_SLIC_BASE (AR71XX_APB_BASE + 0x00090000) -+#define AR71XX_SLIC_SIZE 0x10000 -+#define AR71XX_DMA_BASE (AR71XX_APB_BASE + 0x000A0000) -+#define AR71XX_DMA_SIZE 0x10000 -+#define AR71XX_STEREO_BASE (AR71XX_APB_BASE + 0x000B0000) -+#define AR71XX_STEREO_SIZE 0x10000 -+ -+#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000C0000) -+#define AR724X_PCI_CRP_SIZE 0x100 -+ -+#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000F0000) -+#define AR724X_PCI_CTRL_SIZE 0x100 -+ -+#define AR91XX_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) -+#define AR91XX_WMAC_SIZE 0x30000 -+ -+#define AR71XX_MEM_SIZE_MIN 0x0200000 -+#define AR71XX_MEM_SIZE_MAX 0x10000000 ++#include ++#include ++#include ++#include ++#include + -+#define AR71XX_CPU_IRQ_BASE 0 -+#define AR71XX_MISC_IRQ_BASE 8 -+#define AR71XX_MISC_IRQ_COUNT 8 -+#define AR71XX_GPIO_IRQ_BASE 16 -+#define AR71XX_GPIO_IRQ_COUNT 32 -+#define AR71XX_PCI_IRQ_BASE 48 -+#define AR71XX_PCI_IRQ_COUNT 8 ++#include + -+#define AR71XX_CPU_IRQ_IP2 (AR71XX_CPU_IRQ_BASE + 2) -+#define AR71XX_CPU_IRQ_USB (AR71XX_CPU_IRQ_BASE + 3) -+#define AR71XX_CPU_IRQ_GE0 (AR71XX_CPU_IRQ_BASE + 4) -+#define AR71XX_CPU_IRQ_GE1 (AR71XX_CPU_IRQ_BASE + 5) -+#define AR71XX_CPU_IRQ_MISC (AR71XX_CPU_IRQ_BASE + 6) -+#define AR71XX_CPU_IRQ_TIMER (AR71XX_CPU_IRQ_BASE + 7) ++#include "machtype.h" ++#include "devices.h" ++#include "dev-m25p80.h" ++#include "dev-ap94-pci.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-usb.h" + -+#define AR71XX_MISC_IRQ_TIMER (AR71XX_MISC_IRQ_BASE + 0) -+#define AR71XX_MISC_IRQ_ERROR (AR71XX_MISC_IRQ_BASE + 1) -+#define AR71XX_MISC_IRQ_GPIO (AR71XX_MISC_IRQ_BASE + 2) -+#define AR71XX_MISC_IRQ_UART (AR71XX_MISC_IRQ_BASE + 3) -+#define AR71XX_MISC_IRQ_WDOG (AR71XX_MISC_IRQ_BASE + 4) -+#define AR71XX_MISC_IRQ_PERFC (AR71XX_MISC_IRQ_BASE + 5) -+#define AR71XX_MISC_IRQ_OHCI (AR71XX_MISC_IRQ_BASE + 6) -+#define AR71XX_MISC_IRQ_DMA (AR71XX_MISC_IRQ_BASE + 7) ++#define WNDR3700_GPIO_LED_WPS_ORANGE 0 ++#define WNDR3700_GPIO_LED_POWER_ORANGE 1 ++#define WNDR3700_GPIO_LED_POWER_GREEN 2 ++#define WNDR3700_GPIO_LED_WPS_GREEN 4 ++#define WNDR3700_GPIO_LED_WAN_GREEN 6 + -+#define AR71XX_GPIO_IRQ(_x) (AR71XX_GPIO_IRQ_BASE + (_x)) ++#define WNDR3700_GPIO_BTN_WPS 3 ++#define WNDR3700_GPIO_BTN_RESET 8 ++#define WNDR3700_GPIO_BTN_WIFI 11 + -+#define AR71XX_PCI_IRQ_DEV0 (AR71XX_PCI_IRQ_BASE + 0) -+#define AR71XX_PCI_IRQ_DEV1 (AR71XX_PCI_IRQ_BASE + 1) -+#define AR71XX_PCI_IRQ_DEV2 (AR71XX_PCI_IRQ_BASE + 2) -+#define AR71XX_PCI_IRQ_CORE (AR71XX_PCI_IRQ_BASE + 4) ++#define WNDR3700_GPIO_RTL8366_SDA 5 ++#define WNDR3700_GPIO_RTL8366_SCK 7 + -+extern u32 ar71xx_ahb_freq; -+extern u32 ar71xx_cpu_freq; -+extern u32 ar71xx_ddr_freq; ++#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL) + -+enum ar71xx_soc_type { -+ AR71XX_SOC_UNKNOWN, -+ AR71XX_SOC_AR7130, -+ AR71XX_SOC_AR7141, -+ AR71XX_SOC_AR7161, -+ AR71XX_SOC_AR7240, -+ AR71XX_SOC_AR7241, -+ AR71XX_SOC_AR7242, -+ AR71XX_SOC_AR9130, -+ AR71XX_SOC_AR9132 -+}; ++#define WNDR3700_ETH0_MAC_OFFSET 0 ++#define WNDR3700_ETH1_MAC_OFFSET 0x6 + -+extern enum ar71xx_soc_type ar71xx_soc; ++#define WNDR3700_WMAC0_MAC_OFFSET 0 ++#define WNDR3700_WMAC1_MAC_OFFSET 0xc ++#define WNDR3700_CALDATA0_OFFSET 0x1000 ++#define WNDR3700_CALDATA1_OFFSET 0x5000 + -+/* -+ * PLL block -+ */ -+#define AR71XX_PLL_REG_CPU_CONFIG 0x00 -+#define AR71XX_PLL_REG_SEC_CONFIG 0x04 -+#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10 -+#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14 ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition wndr3700_partitions[] = { ++ { ++ .name = "uboot", ++ .offset = 0, ++ .size = 0x050000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "env", ++ .offset = 0x050000, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "rootfs", ++ .offset = 0x070000, ++ .size = 0x720000, ++ }, { ++ .name = "config", ++ .offset = 0x790000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "config_bak", ++ .offset = 0x7a0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "pot", ++ .offset = 0x7b0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "traffic_meter", ++ .offset = 0x7c0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "language", ++ .offset = 0x7d0000, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "caldata", ++ .offset = 0x7f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ } ++}; + -+#define AR71XX_PLL_DIV_SHIFT 3 -+#define AR71XX_PLL_DIV_MASK 0x1f -+#define AR71XX_CPU_DIV_SHIFT 16 -+#define AR71XX_CPU_DIV_MASK 0x3 -+#define AR71XX_DDR_DIV_SHIFT 18 -+#define AR71XX_DDR_DIV_MASK 0x3 -+#define AR71XX_AHB_DIV_SHIFT 20 -+#define AR71XX_AHB_DIV_MASK 0x7 ++static struct mtd_partition wndr3700v2_partitions[] = { ++ { ++ .name = "uboot", ++ .offset = 0, ++ .size = 0x050000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "env", ++ .offset = 0x050000, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "rootfs", ++ .offset = 0x070000, ++ .size = 0xe40000, ++ }, { ++ .name = "config", ++ .offset = 0xeb0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "config_bak", ++ .offset = 0xec0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "pot", ++ .offset = 0xed0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "traffic_meter", ++ .offset = 0xee0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "language", ++ .offset = 0xef0000, ++ .size = 0x100000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "caldata", ++ .offset = 0xff0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ } ++}; ++#define wndr3700_num_partitions ARRAY_SIZE(wndr3700_partitions) ++#define wndr3700v2_num_partitions ARRAY_SIZE(wndr3700v2_partitions) ++#else ++#define wndr3700_partitions NULL ++#define wndr3700_num_partitions 0 ++#define wndr3700v2_partitions NULL ++#define wndr3700v2_num_partitions 0 ++#endif /* CONFIG_MTD_PARTITIONS */ + -+#define AR71XX_ETH0_PLL_SHIFT 17 -+#define AR71XX_ETH1_PLL_SHIFT 19 ++static struct flash_platform_data wndr3700_flash_data; + -+#define AR724X_PLL_REG_CPU_CONFIG 0x00 -+#define AR724X_PLL_REG_PCIE_CONFIG 0x18 ++static struct gpio_led wndr3700_leds_gpio[] __initdata = { ++ { ++ .name = "wndr3700:green:power", ++ .gpio = WNDR3700_GPIO_LED_POWER_GREEN, ++ .active_low = 1, ++ }, { ++ .name = "wndr3700:orange:power", ++ .gpio = WNDR3700_GPIO_LED_POWER_ORANGE, ++ .active_low = 1, ++ }, { ++ .name = "wndr3700:green:wps", ++ .gpio = WNDR3700_GPIO_LED_WPS_GREEN, ++ .active_low = 1, ++ }, { ++ .name = "wndr3700:orange:wps", ++ .gpio = WNDR3700_GPIO_LED_WPS_ORANGE, ++ .active_low = 1, ++ }, { ++ .name = "wndr3700:green:wan", ++ .gpio = WNDR3700_GPIO_LED_WAN_GREEN, ++ .active_low = 1, ++ } ++}; + -+#define AR724X_PLL_DIV_SHIFT 0 -+#define AR724X_PLL_DIV_MASK 0x3ff -+#define AR724X_PLL_REF_DIV_SHIFT 10 -+#define AR724X_PLL_REF_DIV_MASK 0xf -+#define AR724X_AHB_DIV_SHIFT 19 -+#define AR724X_AHB_DIV_MASK 0x1 -+#define AR724X_DDR_DIV_SHIFT 22 -+#define AR724X_DDR_DIV_MASK 0x3 ++static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WNDR3700_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, { ++ .desc = "wps", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WNDR3700_GPIO_BTN_WPS, ++ .active_low = 1, ++ }, { ++ .desc = "wifi", ++ .type = EV_KEY, ++ .code = BTN_2, ++ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WNDR3700_GPIO_BTN_WIFI, ++ .active_low = 1, ++ } ++}; + -+#define AR91XX_PLL_REG_CPU_CONFIG 0x00 -+#define AR91XX_PLL_REG_ETH_CONFIG 0x04 -+#define AR91XX_PLL_REG_ETH0_INT_CLOCK 0x14 -+#define AR91XX_PLL_REG_ETH1_INT_CLOCK 0x18 ++static struct rtl8366_platform_data wndr3700_rtl8366s_data = { ++ .gpio_sda = WNDR3700_GPIO_RTL8366_SDA, ++ .gpio_sck = WNDR3700_GPIO_RTL8366_SCK, ++}; + -+#define AR91XX_PLL_DIV_SHIFT 0 -+#define AR91XX_PLL_DIV_MASK 0x3ff -+#define AR91XX_DDR_DIV_SHIFT 22 -+#define AR91XX_DDR_DIV_MASK 0x3 -+#define AR91XX_AHB_DIV_SHIFT 19 -+#define AR91XX_AHB_DIV_MASK 0x1 ++static struct platform_device wndr3700_rtl8366s_device = { ++ .name = RTL8366S_DRIVER_NAME, ++ .id = -1, ++ .dev = { ++ .platform_data = &wndr3700_rtl8366s_data, ++ } ++}; + -+#define AR91XX_ETH0_PLL_SHIFT 20 -+#define AR91XX_ETH1_PLL_SHIFT 22 ++static void __init wndr3700_common_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + -+extern void __iomem *ar71xx_pll_base; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ++ art + WNDR3700_ETH0_MAC_OFFSET, 0); ++ ar71xx_eth0_pll_data.pll_1000 = 0x11110000; ++ ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.speed = SPEED_1000; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; + -+static inline void ar71xx_pll_wr(unsigned reg, u32 val) -+{ -+ __raw_writel(val, ar71xx_pll_base + reg); -+} ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ++ art + WNDR3700_ETH1_MAC_OFFSET, 0); ++ ar71xx_eth1_pll_data.pll_1000 = 0x11110000; ++ ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev; ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.phy_mask = 0x10; + -+static inline u32 ar71xx_pll_rr(unsigned reg) -+{ -+ return __raw_readl(ar71xx_pll_base + reg); -+} ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+/* -+ * USB_CONFIG block -+ */ -+#define USB_CTRL_REG_FLADJ 0x00 -+#define USB_CTRL_REG_CONFIG 0x04 ++ ar71xx_add_device_usb(); + -+extern void __iomem *ar71xx_usb_ctrl_base; ++ ar71xx_add_device_m25p80(&wndr3700_flash_data); + -+static inline void ar71xx_usb_ctrl_wr(unsigned reg, u32 val) ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio), ++ wndr3700_leds_gpio); ++ ++ ar71xx_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(wndr3700_gpio_keys), ++ wndr3700_gpio_keys); ++ ++ platform_device_register(&wndr3700_rtl8366s_device); ++ platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0); ++ ++ ap94_pci_setup_wmac_led_pin(0, 5); ++ ap94_pci_setup_wmac_led_pin(1, 5); ++ ++ /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */ ++ ap94_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6)); ++ ++ /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */ ++ ap94_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6)); ++ ++ ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET, ++ art + WNDR3700_WMAC0_MAC_OFFSET, ++ art + WNDR3700_CALDATA1_OFFSET, ++ art + WNDR3700_WMAC1_MAC_OFFSET); ++} ++ ++static void __init wndr3700_setup(void) +{ -+ __raw_writel(val, ar71xx_usb_ctrl_base + reg); ++ wndr3700_flash_data.parts = wndr3700_partitions, ++ wndr3700_flash_data.nr_parts = wndr3700_num_partitions, ++ wndr3700_common_setup(); +} + -+static inline u32 ar71xx_usb_ctrl_rr(unsigned reg) ++MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700", ++ wndr3700_setup); ++ ++static void __init wndr3700v2_setup(void) +{ -+ return __raw_readl(ar71xx_usb_ctrl_base + reg); ++ wndr3700_flash_data.parts = wndr3700v2_partitions, ++ wndr3700_flash_data.nr_parts = wndr3700v2_num_partitions, ++ wndr3700_common_setup(); +} + ++MIPS_MACHINE(AR71XX_MACH_WNDR3700V2, "WNDR3700v2", "NETGEAR WNDR3700v2", ++ wndr3700v2_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wnr2000.c linux-2.6.39/arch/mips/ar71xx/mach-wnr2000.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-wnr2000.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wnr2000.c 2011-08-24 02:41:55.617990333 +0200 +@@ -0,0 +1,150 @@ +/* -+ * GPIO block ++ * NETGEAR WNR2000 board support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2008-2009 Andy Boyett ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. + */ -+#define GPIO_REG_OE 0x00 -+#define GPIO_REG_IN 0x04 -+#define GPIO_REG_OUT 0x08 -+#define GPIO_REG_SET 0x0c -+#define GPIO_REG_CLEAR 0x10 -+#define GPIO_REG_INT_MODE 0x14 -+#define GPIO_REG_INT_TYPE 0x18 -+#define GPIO_REG_INT_POLARITY 0x1c -+#define GPIO_REG_INT_PENDING 0x20 -+#define GPIO_REG_INT_ENABLE 0x24 -+#define GPIO_REG_FUNC 0x28 + -+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) -+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) -+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) -+#define AR71XX_GPIO_FUNC_UART_EN BIT(8) -+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) -+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) ++#include ++#include + -+#define AR71XX_GPIO_COUNT 16 ++#include + -+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) -+#define AR724X_GPIO_FUNC_SPI_EN BIT(18) -+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) -+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) -+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) -+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) -+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) -+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) -+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) -+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) -+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) -+#define AR724X_GPIO_FUNC_UART_EN BIT(1) -+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) ++#include "machtype.h" ++#include "devices.h" ++#include "dev-m25p80.h" ++#include "dev-ar9xxx-wmac.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" + -+#define AR724X_GPIO_COUNT 18 ++#define WNR2000_GPIO_LED_PWR_GREEN 14 ++#define WNR2000_GPIO_LED_PWR_AMBER 7 ++#define WNR2000_GPIO_LED_WPS 4 ++#define WNR2000_GPIO_LED_WLAN 6 ++#define WNR2000_GPIO_BTN_RESET 21 ++#define WNR2000_GPIO_BTN_WPS 8 + -+#define AR91XX_GPIO_FUNC_WMAC_LED_EN BIT(22) -+#define AR91XX_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) -+#define AR91XX_GPIO_FUNC_I2S_REFCLKEN BIT(20) -+#define AR91XX_GPIO_FUNC_I2S_MCKEN BIT(19) -+#define AR91XX_GPIO_FUNC_I2S1_EN BIT(18) -+#define AR91XX_GPIO_FUNC_I2S0_EN BIT(17) -+#define AR91XX_GPIO_FUNC_SLIC_EN BIT(16) -+#define AR91XX_GPIO_FUNC_UART_RTSCTS_EN BIT(9) -+#define AR91XX_GPIO_FUNC_UART_EN BIT(8) -+#define AR91XX_GPIO_FUNC_USB_CLK_EN BIT(4) ++#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL) + -+#define AR91XX_GPIO_COUNT 22 ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition wnr2000_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x050000, ++ .size = 0x240000, ++ }, { ++ .name = "user-config", ++ .offset = 0x290000, ++ .size = 0x010000, ++ }, { ++ .name = "uImage", ++ .offset = 0x2a0000, ++ .size = 0x120000, ++ }, { ++ .name = "language_table", ++ .offset = 0x3c0000, ++ .size = 0x020000, ++ }, { ++ .name = "rootfs_checksum", ++ .offset = 0x3e0000, ++ .size = 0x010000, ++ }, { ++ .name = "art", ++ .offset = 0x3f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ } ++}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+extern void __iomem *ar71xx_gpio_base; ++static struct flash_platform_data wnr2000_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = wnr2000_partitions, ++ .nr_parts = ARRAY_SIZE(wnr2000_partitions), ++#endif ++}; + -+static inline void ar71xx_gpio_wr(unsigned reg, u32 value) -+{ -+ __raw_writel(value, ar71xx_gpio_base + reg); -+} ++static struct gpio_led wnr2000_leds_gpio[] __initdata = { ++ { ++ .name = "wnr2000:green:power", ++ .gpio = WNR2000_GPIO_LED_PWR_GREEN, ++ .active_low = 1, ++ }, { ++ .name = "wnr2000:amber:power", ++ .gpio = WNR2000_GPIO_LED_PWR_AMBER, ++ .active_low = 1, ++ }, { ++ .name = "wnr2000:green:wps", ++ .gpio = WNR2000_GPIO_LED_WPS, ++ .active_low = 1, ++ }, { ++ .name = "wnr2000:blue:wlan", ++ .gpio = WNR2000_GPIO_LED_WLAN, ++ .active_low = 1, ++ } ++}; + -+static inline u32 ar71xx_gpio_rr(unsigned reg) ++static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WNR2000_GPIO_BTN_RESET, ++ }, { ++ .desc = "wps", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WNR2000_GPIO_BTN_WPS, ++ } ++}; ++ ++static void __init wnr2000_setup(void) +{ -+ return __raw_readl(ar71xx_gpio_base + reg); -+} ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + -+void ar71xx_gpio_init(void) __init; -+void ar71xx_gpio_function_enable(u32 mask); -+void ar71xx_gpio_function_disable(u32 mask); -+void ar71xx_gpio_function_setup(u32 set, u32 clear); ++ ar71xx_add_device_mdio(0x0); + -+/* -+ * DDR_CTRL block -+ */ -+#define AR71XX_DDR_REG_PCI_WIN0 0x7c -+#define AR71XX_DDR_REG_PCI_WIN1 0x80 -+#define AR71XX_DDR_REG_PCI_WIN2 0x84 -+#define AR71XX_DDR_REG_PCI_WIN3 0x88 -+#define AR71XX_DDR_REG_PCI_WIN4 0x8c -+#define AR71XX_DDR_REG_PCI_WIN5 0x90 -+#define AR71XX_DDR_REG_PCI_WIN6 0x94 -+#define AR71XX_DDR_REG_PCI_WIN7 0x98 -+#define AR71XX_DDR_REG_FLUSH_GE0 0x9c -+#define AR71XX_DDR_REG_FLUSH_GE1 0xa0 -+#define AR71XX_DDR_REG_FLUSH_USB 0xa4 -+#define AR71XX_DDR_REG_FLUSH_PCI 0xa8 ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.has_ar8216 = 1; + -+#define AR724X_DDR_REG_FLUSH_GE0 0x7c -+#define AR724X_DDR_REG_FLUSH_GE1 0x80 -+#define AR724X_DDR_REG_FLUSH_USB 0x84 -+#define AR724X_DDR_REG_FLUSH_PCIE 0x88 ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.phy_mask = 0x10; + -+#define AR91XX_DDR_REG_FLUSH_GE0 0x7c -+#define AR91XX_DDR_REG_FLUSH_GE1 0x80 -+#define AR91XX_DDR_REG_FLUSH_USB 0x84 -+#define AR91XX_DDR_REG_FLUSH_WMAC 0x88 ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+#define PCI_WIN0_OFFS 0x10000000 -+#define PCI_WIN1_OFFS 0x11000000 -+#define PCI_WIN2_OFFS 0x12000000 -+#define PCI_WIN3_OFFS 0x13000000 -+#define PCI_WIN4_OFFS 0x14000000 -+#define PCI_WIN5_OFFS 0x15000000 -+#define PCI_WIN6_OFFS 0x16000000 -+#define PCI_WIN7_OFFS 0x07000000 ++ ar71xx_add_device_m25p80(&wnr2000_flash_data); + -+extern void __iomem *ar71xx_ddr_base; ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio), ++ wnr2000_leds_gpio); + -+static inline void ar71xx_ddr_wr(unsigned reg, u32 val) -+{ -+ __raw_writel(val, ar71xx_ddr_base + reg); -+} ++ ar71xx_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(wnr2000_gpio_keys), ++ wnr2000_gpio_keys); + -+static inline u32 ar71xx_ddr_rr(unsigned reg) -+{ -+ return __raw_readl(ar71xx_ddr_base + reg); -+} + -+void ar71xx_ddr_flush(u32 reg); ++ ar9xxx_add_device_wmac(eeprom, NULL); ++} + ++MIPS_MACHINE(AR71XX_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wp543.c linux-2.6.39/arch/mips/ar71xx/mach-wp543.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-wp543.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wp543.c 2011-08-24 02:41:55.617990333 +0200 +@@ -0,0 +1,101 @@ +/* -+ * PCI block ++ * Compex WP543/WPJ543 board support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. + */ -+#define AR71XX_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + PCI_WIN7_OFFS + 0x10000) -+#define AR71XX_PCI_CFG_SIZE 0x100 -+ -+#define PCI_REG_CRP_AD_CBE 0x00 -+#define PCI_REG_CRP_WRDATA 0x04 -+#define PCI_REG_CRP_RDDATA 0x08 -+#define PCI_REG_CFG_AD 0x0c -+#define PCI_REG_CFG_CBE 0x10 -+#define PCI_REG_CFG_WRDATA 0x14 -+#define PCI_REG_CFG_RDDATA 0x18 -+#define PCI_REG_PCI_ERR 0x1c -+#define PCI_REG_PCI_ERR_ADDR 0x20 -+#define PCI_REG_AHB_ERR 0x24 -+#define PCI_REG_AHB_ERR_ADDR 0x28 + -+#define PCI_CRP_CMD_WRITE 0x00010000 -+#define PCI_CRP_CMD_READ 0x00000000 -+#define PCI_CFG_CMD_READ 0x0000000a -+#define PCI_CFG_CMD_WRITE 0x0000000b -+ -+#define PCI_IDSEL_ADL_START 17 ++#include ++#include + -+#define AR724X_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + 0x4000000) -+#define AR724X_PCI_CFG_SIZE 0x1000 ++#include + -+#define AR724X_PCI_REG_APP 0x00 -+#define AR724X_PCI_REG_RESET 0x18 -+#define AR724X_PCI_REG_INT_STATUS 0x4c -+#define AR724X_PCI_REG_INT_MASK 0x50 ++#include "machtype.h" ++#include "devices.h" ++#include "dev-m25p80.h" ++#include "dev-pb42-pci.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-usb.h" + -+#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0) -+#define AR724X_PCI_RESET_LINK_UP BIT(0) ++#define WP543_GPIO_SW6 2 ++#define WP543_GPIO_LED_1 3 ++#define WP543_GPIO_LED_2 4 ++#define WP543_GPIO_LED_WLAN 5 ++#define WP543_GPIO_LED_CONN 6 ++#define WP543_GPIO_LED_DIAG 7 ++#define WP543_GPIO_SW4 8 + -+#define AR724X_PCI_INT_DEV0 BIT(14) ++#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL) + -+/* -+ * RESET block -+ */ -+#define AR71XX_RESET_REG_TIMER 0x00 -+#define AR71XX_RESET_REG_TIMER_RELOAD 0x04 -+#define AR71XX_RESET_REG_WDOG_CTRL 0x08 -+#define AR71XX_RESET_REG_WDOG 0x0c -+#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10 -+#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14 -+#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18 -+#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c -+#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20 -+#define AR71XX_RESET_REG_RESET_MODULE 0x24 -+#define AR71XX_RESET_REG_PERFC_CTRL 0x2c -+#define AR71XX_RESET_REG_PERFC0 0x30 -+#define AR71XX_RESET_REG_PERFC1 0x34 -+#define AR71XX_RESET_REG_REV_ID 0x90 -+ -+#define AR91XX_RESET_REG_GLOBAL_INT_STATUS 0x18 -+#define AR91XX_RESET_REG_RESET_MODULE 0x1c -+#define AR91XX_RESET_REG_PERF_CTRL 0x20 -+#define AR91XX_RESET_REG_PERFC0 0x24 -+#define AR91XX_RESET_REG_PERFC1 0x28 -+ -+#define AR724X_RESET_REG_RESET_MODULE 0x1c -+ -+#define WDOG_CTRL_LAST_RESET BIT(31) -+#define WDOG_CTRL_ACTION_MASK 3 -+#define WDOG_CTRL_ACTION_NONE 0 /* no action */ -+#define WDOG_CTRL_ACTION_GPI 1 /* general purpose interrupt */ -+#define WDOG_CTRL_ACTION_NMI 2 /* NMI */ -+#define WDOG_CTRL_ACTION_FCR 3 /* full chip reset */ -+ -+#define MISC_INT_DMA BIT(7) -+#define MISC_INT_OHCI BIT(6) -+#define MISC_INT_PERFC BIT(5) -+#define MISC_INT_WDOG BIT(4) -+#define MISC_INT_UART BIT(3) -+#define MISC_INT_GPIO BIT(2) -+#define MISC_INT_ERROR BIT(1) -+#define MISC_INT_TIMER BIT(0) -+ -+#define PCI_INT_CORE BIT(4) -+#define PCI_INT_DEV2 BIT(2) -+#define PCI_INT_DEV1 BIT(1) -+#define PCI_INT_DEV0 BIT(0) -+ -+#define RESET_MODULE_EXTERNAL BIT(28) -+#define RESET_MODULE_FULL_CHIP BIT(24) -+#define RESET_MODULE_AMBA2WMAC BIT(22) -+#define RESET_MODULE_CPU_NMI BIT(21) -+#define RESET_MODULE_CPU_COLD BIT(20) -+#define RESET_MODULE_DMA BIT(19) -+#define RESET_MODULE_SLIC BIT(18) -+#define RESET_MODULE_STEREO BIT(17) -+#define RESET_MODULE_DDR BIT(16) -+#define RESET_MODULE_GE1_MAC BIT(13) -+#define RESET_MODULE_GE1_PHY BIT(12) -+#define RESET_MODULE_USBSUS_OVERRIDE BIT(10) -+#define RESET_MODULE_GE0_MAC BIT(9) -+#define RESET_MODULE_GE0_PHY BIT(8) -+#define RESET_MODULE_USB_OHCI_DLL BIT(6) -+#define RESET_MODULE_USB_HOST BIT(5) -+#define RESET_MODULE_USB_PHY BIT(4) -+#define RESET_MODULE_USB_OHCI_DLL_7240 BIT(3) -+#define RESET_MODULE_PCI_BUS BIT(1) -+#define RESET_MODULE_PCI_CORE BIT(0) -+ -+#define AR724X_RESET_GE1_MDIO BIT(23) -+#define AR724X_RESET_GE0_MDIO BIT(22) -+#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) -+#define AR724X_RESET_PCIE_PHY BIT(7) -+#define AR724X_RESET_PCIE BIT(6) -+ -+#define REV_ID_MAJOR_MASK 0xfff0 -+#define REV_ID_MAJOR_AR71XX 0x00a0 -+#define REV_ID_MAJOR_AR913X 0x00b0 -+#define REV_ID_MAJOR_AR7240 0x00c0 -+#define REV_ID_MAJOR_AR7241 0x0100 -+#define REV_ID_MAJOR_AR7242 0x1100 -+ -+#define AR71XX_REV_ID_MINOR_MASK 0x3 -+#define AR71XX_REV_ID_MINOR_AR7130 0x0 -+#define AR71XX_REV_ID_MINOR_AR7141 0x1 -+#define AR71XX_REV_ID_MINOR_AR7161 0x2 -+#define AR71XX_REV_ID_REVISION_MASK 0x3 -+#define AR71XX_REV_ID_REVISION_SHIFT 2 -+ -+#define AR91XX_REV_ID_MINOR_MASK 0x3 -+#define AR91XX_REV_ID_MINOR_AR9130 0x0 -+#define AR91XX_REV_ID_MINOR_AR9132 0x1 -+#define AR91XX_REV_ID_REVISION_MASK 0x3 -+#define AR91XX_REV_ID_REVISION_SHIFT 2 -+ -+#define AR724X_REV_ID_REVISION_MASK 0x3 -+ -+extern void __iomem *ar71xx_reset_base; ++static struct gpio_led wp543_leds_gpio[] __initdata = { ++ { ++ .name = "wp543:green:led1", ++ .gpio = WP543_GPIO_LED_1, ++ .active_low = 1, ++ }, { ++ .name = "wp543:green:led2", ++ .gpio = WP543_GPIO_LED_2, ++ .active_low = 1, ++ }, { ++ .name = "wp543:green:wlan", ++ .gpio = WP543_GPIO_LED_WLAN, ++ .active_low = 1, ++ }, { ++ .name = "wp543:green:conn", ++ .gpio = WP543_GPIO_LED_CONN, ++ .active_low = 1, ++ }, { ++ .name = "wp543:green:diag", ++ .gpio = WP543_GPIO_LED_DIAG, ++ .active_low = 1, ++ } ++}; + -+static inline void ar71xx_reset_wr(unsigned reg, u32 val) -+{ -+ __raw_writel(val, ar71xx_reset_base + reg); -+} ++static struct gpio_keys_button wp543_gpio_keys[] __initdata = { ++ { ++ .desc = "sw6", ++ .type = EV_KEY, ++ .code = BTN_0, ++ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WP543_GPIO_SW6, ++ }, { ++ .desc = "sw4", ++ .type = EV_KEY, ++ .code = BTN_1, ++ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WP543_GPIO_SW4, ++ } ++}; + -+static inline u32 ar71xx_reset_rr(unsigned reg) ++static void __init wp543_setup(void) +{ -+ return __raw_readl(ar71xx_reset_base + reg); -+} -+ -+void ar71xx_device_stop(u32 mask); -+void ar71xx_device_start(u32 mask); -+int ar71xx_device_stopped(u32 mask); -+ -+/* -+ * SPI block -+ */ -+#define SPI_REG_FS 0x00 /* Function Select */ -+#define SPI_REG_CTRL 0x04 /* SPI Control */ -+#define SPI_REG_IOC 0x08 /* SPI I/O Control */ -+#define SPI_REG_RDS 0x0c /* Read Data Shift */ -+ -+#define SPI_FS_GPIO BIT(0) /* Enable GPIO mode */ -+ -+#define SPI_CTRL_RD BIT(6) /* Remap Disable */ -+#define SPI_CTRL_DIV_MASK 0x3f ++ ar71xx_add_device_m25p80(NULL); + -+#define SPI_IOC_DO BIT(0) /* Data Out pin */ -+#define SPI_IOC_CLK BIT(8) /* CLK pin */ -+#define SPI_IOC_CS(n) BIT(16 + (n)) -+#define SPI_IOC_CS0 SPI_IOC_CS(0) -+#define SPI_IOC_CS1 SPI_IOC_CS(1) -+#define SPI_IOC_CS2 SPI_IOC_CS(2) -+#define SPI_IOC_CS_ALL (SPI_IOC_CS0 | SPI_IOC_CS1 | SPI_IOC_CS2) ++ ar71xx_add_device_mdio(0xfffffff7); + -+void ar71xx_flash_acquire(void); -+void ar71xx_flash_release(void); ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_eth0_data.phy_mask = 0x08; ++ ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC | ++ RESET_MODULE_GE0_PHY; ++ ar71xx_add_device_eth(0); + -+/* -+ * MII_CTRL block -+ */ -+#define MII_REG_MII0_CTRL 0x00 -+#define MII_REG_MII1_CTRL 0x04 ++ ar71xx_add_device_usb(); + -+#define MII0_CTRL_IF_GMII 0 -+#define MII0_CTRL_IF_MII 1 -+#define MII0_CTRL_IF_RGMII 2 -+#define MII0_CTRL_IF_RMII 3 ++ pb42_pci_init(); + -+#define MII1_CTRL_IF_RGMII 0 -+#define MII1_CTRL_IF_RMII 1 ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio), ++ wp543_leds_gpio); + -+#endif /* __ASSEMBLER__ */ ++ ar71xx_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(wp543_gpio_keys), ++ wp543_gpio_keys); ++} + -+#endif /* __ASM_MACH_AR71XX_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,26 @@ ++MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt160nl.c linux-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt160nl.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c 2011-08-24 02:41:55.617990333 +0200 +@@ -0,0 +1,161 @@ +/* -+ * AR91xx parallel flash driver platform data definitions ++ * Linksys WRT160NL board support + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#ifndef __AR91XX_FLASH_H -+#define __AR91XX_FLASH_H ++#include ++#include + -+struct mtd_partition; ++#include + -+struct ar91xx_flash_platform_data { -+ unsigned int width; -+ u8 is_shared:1; -+#ifdef CONFIG_MTD_PARTITIONS -+ unsigned int nr_parts; -+ struct mtd_partition *parts; -+#endif -+}; ++#include "machtype.h" ++#include "devices.h" ++#include "dev-m25p80.h" ++#include "dev-ar9xxx-wmac.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-usb.h" ++#include "nvram.h" + -+#endif /* __AR91XX_FLASH_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,56 @@ -+/* -+ * Atheros AR71xx specific CPU feature overrides -+ * -+ * Copyright (C) 2008 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This file was derived from: include/asm-mips/cpu-features.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * Copyright (C) 2004 Maciej W. Rozycki -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ -+#ifndef __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H -+#define __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H ++#define WRT160NL_GPIO_LED_POWER 14 ++#define WRT160NL_GPIO_LED_WPS_AMBER 9 ++#define WRT160NL_GPIO_LED_WPS_BLUE 8 ++#define WRT160NL_GPIO_LED_WLAN 6 + -+#define cpu_has_tlb 1 -+#define cpu_has_4kex 1 -+#define cpu_has_3k_cache 0 -+#define cpu_has_4k_cache 1 -+#define cpu_has_tx39_cache 0 -+#define cpu_has_sb1_cache 0 -+#define cpu_has_fpu 0 -+#define cpu_has_32fpr 0 -+#define cpu_has_counter 1 -+#define cpu_has_watch 1 -+#define cpu_has_divec 1 ++#define WRT160NL_GPIO_BTN_WPS 7 ++#define WRT160NL_GPIO_BTN_RESET 21 + -+#define cpu_has_prefetch 1 -+#define cpu_has_ejtag 1 -+#define cpu_has_llsc 1 ++#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL) + -+#define cpu_has_mips16 1 -+#define cpu_has_mdmx 0 -+#define cpu_has_mips3d 0 -+#define cpu_has_smartmips 0 -+ -+#define cpu_has_mips32r1 1 -+#define cpu_has_mips32r2 1 -+#define cpu_has_mips64r1 0 -+#define cpu_has_mips64r2 0 ++#define WRT160NL_NVRAM_ADDR 0x1f7e0000 ++#define WRT160NL_NVRAM_SIZE 0x10000 + -+#define cpu_has_dsp 0 -+#define cpu_has_mipsmt 0 ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition wrt160nl_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "kernel", ++ .offset = 0x040000, ++ .size = 0x0e0000, ++ }, { ++ .name = "filesytem", ++ .offset = 0x120000, ++ .size = 0x6c0000, ++ }, { ++ .name = "nvram", ++ .offset = 0x7e0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "ART", ++ .offset = 0x7f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x040000, ++ .size = 0x7a0000, ++ } ++}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+#define cpu_has_64bits 0 -+#define cpu_has_64bit_zero_reg 0 -+#define cpu_has_64bit_gp_regs 0 -+#define cpu_has_64bit_addresses 0 ++static struct flash_platform_data wrt160nl_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = wrt160nl_partitions, ++ .nr_parts = ARRAY_SIZE(wrt160nl_partitions), ++#endif ++}; + -+#define cpu_dcache_line_size() 32 -+#define cpu_icache_line_size() 32 ++static struct gpio_led wrt160nl_leds_gpio[] __initdata = { ++ { ++ .name = "wrt160nl:blue:power", ++ .gpio = WRT160NL_GPIO_LED_POWER, ++ .active_low = 1, ++ .default_trigger = "default-on", ++ }, { ++ .name = "wrt160nl:amber:wps", ++ .gpio = WRT160NL_GPIO_LED_WPS_AMBER, ++ .active_low = 1, ++ }, { ++ .name = "wrt160nl:blue:wps", ++ .gpio = WRT160NL_GPIO_LED_WPS_BLUE, ++ .active_low = 1, ++ }, { ++ .name = "wrt160nl:blue:wlan", ++ .gpio = WRT160NL_GPIO_LED_WLAN, ++ .active_low = 1, ++ } ++}; + -+#endif /* __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/gpio.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,53 @@ -+/* -+ * Atheros AR71xx GPIO API definitions -+ * -+ * Copyright (C) 2008 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ ++static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WRT160NL_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, { ++ .desc = "wps", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WRT160NL_GPIO_BTN_WPS, ++ .active_low = 1, ++ } ++}; + -+#ifndef __ASM_MACH_AR71XX_GPIO_H -+#define __ASM_MACH_AR71XX_GPIO_H ++static void __init wrt160nl_setup(void) ++{ ++ const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR); ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ u8 mac[6]; + -+#define ARCH_NR_GPIOS 64 -+#include ++ if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, ++ "lan_hwaddr=", mac) == 0) { ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); ++ } + -+#include ++ ar71xx_add_device_mdio(0x0); + -+extern unsigned long ar71xx_gpio_count; -+extern void __ar71xx_gpio_set_value(unsigned gpio, int value); -+extern int __ar71xx_gpio_get_value(unsigned gpio); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.phy_mask = 0x01; + -+static inline int gpio_to_irq(unsigned gpio) -+{ -+ return AR71XX_GPIO_IRQ(gpio); -+} ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.phy_mask = 0x10; + -+static inline int irq_to_gpio(unsigned irq) -+{ -+ return irq - AR71XX_GPIO_IRQ_BASE; -+} ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+static inline int gpio_get_value(unsigned gpio) -+{ -+ if (gpio < ar71xx_gpio_count) -+ return __ar71xx_gpio_get_value(gpio); ++ ar71xx_add_device_m25p80(&wrt160nl_flash_data); + -+ return __gpio_get_value(gpio); -+} ++ ar71xx_add_device_usb(); + -+static inline void gpio_set_value(unsigned gpio, int value) -+{ -+ if (gpio < ar71xx_gpio_count) -+ __ar71xx_gpio_set_value(gpio, value); ++ if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE, ++ "wl0_hwaddr=", mac) == 0) ++ ar9xxx_add_device_wmac(eeprom, mac); + else -+ __gpio_set_value(gpio, value); -+} -+ -+#define gpio_cansleep __gpio_cansleep ++ ar9xxx_add_device_wmac(eeprom, NULL); + -+#endif /* __ASM_MACH_AR71XX_GPIO_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/irq.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/irq.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,17 @@ -+/* -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+#ifndef __ASM_MACH_AR71XX_IRQ_H -+#define __ASM_MACH_AR71XX_IRQ_H ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio), ++ wrt160nl_leds_gpio); + -+#define MIPS_CPU_IRQ_BASE 0 -+#define NR_IRQS 56 ++ ar71xx_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(wrt160nl_gpio_keys), ++ wrt160nl_gpio_keys); + -+#include_next ++} + -+#endif /* __ASM_MACH_AR71XX_IRQ_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,32 @@ ++MIPS_MACHINE(AR71XX_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL", ++ wrt160nl_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt400n.c linux-2.6.39/arch/mips/ar71xx/mach-wrt400n.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt400n.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wrt400n.c 2011-08-24 02:41:55.617990333 +0200 +@@ -0,0 +1,164 @@ +/* -+ * Atheros AR71xx specific kernel entry setup ++ * Linksys WRT400N board support + * -+ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2009-2010 Gabor Juhos ++ * Copyright (C) 2009 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. -+ * + */ -+#ifndef __ASM_MACH_AR71XX_KERNEL_ENTRY_H -+#define __ASM_MACH_AR71XX_KERNEL_ENTRY_H + -+ /* -+ * Some bootloaders set the 'Kseg0 coherency algorithm' to -+ * 'Cacheable, noncoherent, write-through, no write allocate' -+ * and this cause performance issues. Let's go and change it to -+ * 'Cacheable, noncoherent, write-back, write allocate' -+ */ -+ .macro kernel_entry_setup -+ mfc0 t0, CP0_CONFIG -+ li t1, ~CONF_CM_CMASK -+ and t0, t1 -+ ori t0, CONF_CM_CACHABLE_NONCOHERENT -+ mtc0 t0, CP0_CONFIG -+ nop -+ .endm ++#include ++#include + -+ .macro smp_slave_setup -+ .endm ++#include + -+#endif /* __ASM_MACH_AR71XX_KERNEL_ENTRY_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mach-rb750.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mach-rb750.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,66 @@ -+/* -+ * MikroTik RouterBOARD 750 definitions -+ * -+ * Copyright (C) 2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+#ifndef _MACH_RB750_H -+#define _MACH_RB750_H ++#include "machtype.h" ++#include "devices.h" ++#include "dev-ap94-pci.h" ++#include "dev-m25p80.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" + -+#include ++#define WRT400N_GPIO_LED_ORANGE 5 ++#define WRT400N_GPIO_LED_GREEN 4 ++#define WRT400N_GPIO_LED_POWER 1 ++#define WRT400N_GPIO_LED_WLAN 0 + -+#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */ -+#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */ -+#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */ -+#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */ -+#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */ -+#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */ -+#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */ -+#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */ -+#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */ -+#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */ -+#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */ -+#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */ -+#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */ -+#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */ -+#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */ ++#define WRT400N_GPIO_BTN_RESET 8 ++#define WRT400N_GPIO_BTN_WLSEC 3 + -+#define RB750_GPIO_BTN_RESET 1 -+#define RB750_GPIO_SPI_CS0 2 -+#define RB750_GPIO_LED_ACT 12 -+#define RB750_GPIO_LED_PORT1 13 -+#define RB750_GPIO_LED_PORT2 14 -+#define RB750_GPIO_LED_PORT3 15 -+#define RB750_GPIO_LED_PORT4 16 -+#define RB750_GPIO_LED_PORT5 17 ++#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL) + -+#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT) -+#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1) -+#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2) -+#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3) -+#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4) -+#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5) ++#define WRT400N_MAC_ADDR_OFFSET 0x120c ++#define WRT400N_CALDATA0_OFFSET 0x1000 ++#define WRT400N_CALDATA1_OFFSET 0x5000 + -+#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE) ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition wrt400n_partitions[] = { ++ { ++ .name = "uboot", ++ .offset = 0, ++ .size = 0x030000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "env", ++ .offset = 0x030000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "linux", ++ .offset = 0x040000, ++ .size = 0x140000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x180000, ++ .size = 0x630000, ++ }, { ++ .name = "nvram", ++ .offset = 0x7b0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "factory", ++ .offset = 0x7c0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "language", ++ .offset = 0x7d0000, ++ .size = 0x020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "caldata", ++ .offset = 0x7f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x040000, ++ .size = 0x770000, ++ } ++}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \ -+ RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT) ++static struct flash_platform_data wrt400n_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = wrt400n_partitions, ++ .nr_parts = ARRAY_SIZE(wrt400n_partitions), ++#endif ++}; + -+struct rb750_led_data { -+ char *name; -+ char *default_trigger; -+ u32 mask; -+ int active_low; ++static struct gpio_led wrt400n_leds_gpio[] __initdata = { ++ { ++ .name = "wrt400n:green:status", ++ .gpio = WRT400N_GPIO_LED_GREEN, ++ .active_low = 1, ++ }, { ++ .name = "wrt400n:amber:aoss", ++ .gpio = WRT400N_GPIO_LED_ORANGE, ++ .active_low = 1, ++ }, { ++ .name = "wrt400n:green:wlan", ++ .gpio = WRT400N_GPIO_LED_WLAN, ++ .active_low = 1, ++ }, { ++ .name = "wrt400n:green:power", ++ .gpio = WRT400N_GPIO_LED_POWER, ++ .active_low = 1, ++ } +}; + -+struct rb750_led_platform_data { -+ int num_leds; -+ struct rb750_led_data *leds; ++static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, ++ .gpio = WRT400N_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, { ++ .desc = "wlsec", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL, ++ .gpio = WRT400N_GPIO_BTN_WLSEC, ++ .active_low = 1, ++ } +}; + -+int rb750_latch_change(u32 mask_clr, u32 mask_set); ++static void __init wrt400n_setup(void) ++{ ++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); ++ u8 *mac = art + WRT400N_MAC_ADDR_OFFSET; + -+#endif /* _MACH_RB750_H */ -\ No newline at end of file -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,45 @@ -+/* -+ * Copyright (C) 2008 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ ar71xx_add_device_mdio(0x0); + -+#ifndef __ASM_MACH_AR71XX_MANGLE_PORT_H -+#define __ASM_MACH_AR71XX_MANGLE_PORT_H ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1); ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; + -+#define __swizzle_addr_b(port) ((port) ^ 3) -+#define __swizzle_addr_w(port) ((port) ^ 2) -+#define __swizzle_addr_l(port) (port) -+#define __swizzle_addr_q(port) (port) ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.phy_mask = 0x10; + -+#if defined(CONFIG_SWAP_IO_SPACE) ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+# define ioswabb(a, x) (x) -+# define __mem_ioswabb(a, x) (x) -+# define ioswabw(a, x) le16_to_cpu(x) -+# define __mem_ioswabw(a, x) (x) -+# define ioswabl(a, x) le32_to_cpu(x) -+# define __mem_ioswabl(a, x) (x) -+# define ioswabq(a, x) le64_to_cpu(x) -+# define __mem_ioswabq(a, x) (x) ++ ar71xx_add_device_m25p80(&wrt400n_flash_data); + -+#else ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio), ++ wrt400n_leds_gpio); + -+# define ioswabb(a, x) (x) -+# define __mem_ioswabb(a, x) (x) -+# define ioswabw(a, x) (x) -+# define __mem_ioswabw(a, x) cpu_to_le16(x) -+# define ioswabl(a, x) (x) -+# define __mem_ioswabl(a, x) cpu_to_le32(x) -+# define ioswabq(a, x) (x) -+# define __mem_ioswabq(a, x) cpu_to_le64(x) ++ ar71xx_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(wrt400n_gpio_keys), ++ wrt400n_gpio_keys); + -+#endif ++ ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL, ++ art + WRT400N_CALDATA1_OFFSET, NULL); ++} + -+#endif /* __ASM_MACH_AR71XX_MANGLE_PORT_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/pci.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,39 @@ ++MIPS_MACHINE(AR71XX_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-ag300h.c linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-ag300h.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c 2011-08-24 02:41:55.628193451 +0200 +@@ -0,0 +1,231 @@ +/* -+ * Atheros AR71xx SoC specific PCI definitions ++ * Buffalo WZR-HP-AG300H board support + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2011 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#ifndef __ASM_MACH_AR71XX_PCI_H -+#define __ASM_MACH_AR71XX_PCI_H ++#include ++#include ++#include ++#include + -+struct pci_dev; ++#include ++#include ++#include + -+struct ar71xx_pci_irq { -+ int irq; -+ u8 slot; -+ u8 pin; ++#include "machtype.h" ++#include "devices.h" ++#include "dev-ap94-pci.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-m25p80.h" ++#include "dev-usb.h" ++ ++#define WZRHPAG300H_MAC_OFFSET 0x20c ++#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL) ++ ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition wzrhpag300h_flash_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x0040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "u-boot-env", ++ .offset = 0x0040000, ++ .size = 0x0010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "art", ++ .offset = 0x0050000, ++ .size = 0x0010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "kernel", ++ .offset = 0x0060000, ++ .size = 0x0100000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x0160000, ++ .size = 0x1e90000, ++ }, { ++ .name = "user_property", ++ .offset = 0x1ff0000, ++ .size = 0x0010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x0060000, ++ .size = 0x1f90000, ++ } +}; + -+extern int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev); -+extern unsigned ar71xx_pci_nr_irqs __initdata; -+extern struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+int ar71xx_pcibios_map_irq(const struct pci_dev *dev, -+ uint8_t slot, uint8_t pin) __init; -+int ar71xx_pcibios_init(void) __init; ++static struct mtd_info *concat_devs[2] = { NULL, NULL }; ++static struct work_struct mtd_concat_work; + -+int ar71xx_pci_be_handler(int is_fixup); ++static void mtd_concat_add_work(struct work_struct *work) ++{ ++ struct mtd_info *mtd; + -+int ar724x_pcibios_map_irq(const struct pci_dev *dev, -+ uint8_t slot, uint8_t pin) __init; -+int ar724x_pcibios_init(void) __init; ++ mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash"); + -+int ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) __init; ++#ifdef CONFIG_MTD_PARTITIONS ++ add_mtd_partitions(mtd, wzrhpag300h_flash_partitions, ++ ARRAY_SIZE(wzrhpag300h_flash_partitions)); ++#else ++ add_mtd_device(mtd); ++#endif ++} + -+#endif /* __ASM_MACH_AR71XX_PCI_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/platform.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/platform.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,61 @@ -+/* -+ * Atheros AR71xx SoC specific platform data definitions -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++static void mtd_concat_add(struct mtd_info *mtd) ++{ ++ static bool registered = false; + -+#ifndef __ASM_MACH_AR71XX_PLATFORM_H -+#define __ASM_MACH_AR71XX_PLATFORM_H ++ if (registered) ++ return; + -+#include -+#include -+#include -+#include ++ if (!strcmp(mtd->name, "spi0.0")) ++ concat_devs[0] = mtd; ++ else if (!strcmp(mtd->name, "spi0.1")) ++ concat_devs[1] = mtd; ++ else ++ return; + -+struct ag71xx_platform_data { -+ phy_interface_t phy_if_mode; -+ u32 phy_mask; -+ int speed; -+ int duplex; -+ u32 reset_bit; -+ u32 mii_if; -+ u8 mac_addr[ETH_ALEN]; -+ struct device *mii_bus_dev; ++ if (!concat_devs[0] || !concat_devs[1]) ++ return; + -+ u8 has_gbit:1; -+ u8 is_ar91xx:1; -+ u8 is_ar724x:1; -+ u8 has_ar8216:1; ++ registered = true; ++ INIT_WORK(&mtd_concat_work, mtd_concat_add_work); ++ schedule_work(&mtd_concat_work); ++} ++ ++static void mtd_concat_remove(struct mtd_info *mtd) ++{ ++} + -+ void (* ddr_flush)(void); -+ void (* set_pll)(int speed); ++static void add_mtd_concat_notifier(void) ++{ ++ static struct mtd_notifier not = { ++ .add = mtd_concat_add, ++ .remove = mtd_concat_remove, ++ }; + -+ u32 fifo_cfg1; -+ u32 fifo_cfg2; -+ u32 fifo_cfg3; -+}; ++ register_mtd_user(¬); ++} + -+struct ag71xx_mdio_platform_data { -+ u32 phy_mask; -+ int is_ar7240; ++static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = { ++ { ++ .name = "wzr-hp-ag300h:red:diag", ++ .gpio = 1, ++ .active_low = 1, ++ }, +}; + -+struct ar71xx_ehci_platform_data { -+ u8 is_ar91xx; ++ ++static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = 11, ++ .active_low = 1, ++ }, { ++ .desc = "usb", ++ .type = EV_KEY, ++ .code = BTN_2, ++ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = 3, ++ .active_low = 1, ++ }, { ++ .desc = "aoss", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = 5, ++ .active_low = 1, ++ }, { ++ .desc = "router_auto", ++ .type = EV_KEY, ++ .code = BTN_6, ++ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = 6, ++ .active_low = 1, ++ }, { ++ .desc = "router_off", ++ .type = EV_KEY, ++ .code = BTN_5, ++ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = 7, ++ .active_low = 1, ++ } +}; + -+struct ar71xx_spi_platform_data { -+ unsigned bus_num; -+ unsigned num_chipselect; -+ u32 (*get_ioc_base)(u8 chip_select, int cs_high, int is_on); ++static struct spi_board_info ar71xx_spi_info[] = { ++ { ++ .bus_num = 0, ++ .chip_select = 0, ++ .max_speed_hz = 25000000, ++ .modalias = "m25p80", ++ }, ++ { ++ .bus_num = 0, ++ .chip_select = 1, ++ .max_speed_hz = 25000000, ++ .modalias = "m25p80", ++ } +}; + -+#define AR71XX_SPI_CS_INACTIVE 0 -+#define AR71XX_SPI_CS_ACTIVE 1 ++static void __init wzrhpag300h_setup(void) ++{ ++ u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000); ++ u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000); ++ u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET; ++ u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET; + -+#endif /* __ASM_MACH_AR71XX_PLATFORM_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/war.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h ---- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/war.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,25 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle -+ */ -+#ifndef __ASM_MACH_AR71XX_WAR_H -+#define __ASM_MACH_AR71XX_WAR_H ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 1); + -+#define R4600_V1_INDEX_ICACHEOP_WAR 0 -+#define R4600_V1_HIT_CACHEOP_WAR 0 -+#define R4600_V2_HIT_CACHEOP_WAR 0 -+#define R5432_CP0_INTERRUPT_WAR 0 -+#define BCM1250_M3_WAR 0 -+#define SIBYTE_1956_WAR 0 -+#define MIPS4K_ICACHE_REFILL_WAR 0 -+#define MIPS_CACHE_SYNC_WAR 0 -+#define TX49XX_ICACHE_INDEX_INV_WAR 0 -+#define RM9000_CDEX_SMP_WAR 0 -+#define ICACHE_REFILLS_WORKAROUND_WAR 0 -+#define R10000_LLSC_WAR 0 -+#define MIPS34K_MISSED_ITLB_WAR 0 ++ ar71xx_add_device_mdio(~(BIT(0) | BIT(4))); + -+#endif /* __ASM_MACH_AR71XX_WAR_H */ -diff -Nur linux-2.6.39.orig/arch/mips/include/asm/time.h linux-2.6.39/arch/mips/include/asm/time.h ---- linux-2.6.39.orig/arch/mips/include/asm/time.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/include/asm/time.h 2011-05-27 14:36:51.000000000 +0200 -@@ -52,6 +52,7 @@ - */ - #ifdef CONFIG_CEVT_R4K_LIB - extern unsigned int __weak get_c0_compare_int(void); -+extern unsigned int __weak get_c0_compare_irq(void); - extern int r4k_clockevent_init(void); - #endif - -diff -Nur linux-2.6.39.orig/arch/mips/kernel/Makefile linux-2.6.39/arch/mips/kernel/Makefile ---- linux-2.6.39.orig/arch/mips/kernel/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/kernel/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -94,6 +94,7 @@ - - obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -+obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o - obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o - obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o - -diff -Nur linux-2.6.39.orig/arch/mips/kernel/traps.c linux-2.6.39/arch/mips/kernel/traps.c ---- linux-2.6.39.orig/arch/mips/kernel/traps.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/kernel/traps.c 2011-05-27 14:36:51.000000000 +0200 -@@ -46,6 +46,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -1576,6 +1577,8 @@ - if (cpu_has_mips_r2) { - cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; - cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; -+ if (get_c0_compare_irq) -+ cp0_compare_irq = get_c0_compare_irq(); - cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; - if (cp0_perfcount_irq == cp0_compare_irq) - cp0_perfcount_irq = -1; -diff -Nur linux-2.6.39.orig/arch/mips/pci/Makefile linux-2.6.39/arch/mips/pci/Makefile ---- linux-2.6.39.orig/arch/mips/pci/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/pci/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -18,6 +18,7 @@ - obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o - obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ - ops-bcm63xx.o -+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o - - # - # These are still pretty much in the old state, watch, go blind. -diff -Nur linux-2.6.39.orig/arch/mips/pci/pci-ar71xx.c linux-2.6.39/arch/mips/pci/pci-ar71xx.c ---- linux-2.6.39.orig/arch/mips/pci/pci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/pci/pci-ar71xx.c 2011-06-01 14:02:22.000000000 +0200 -@@ -0,0 +1,408 @@ ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.speed = SPEED_1000; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; ++ ar71xx_eth0_data.phy_mask = BIT(0); ++ ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.phy_mask = BIT(4); ++ ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); ++ ++ ar71xx_add_device_usb(); ++ gpio_request(2, "usb"); ++ gpio_direction_output(2, 1); ++ ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio), ++ wzrhpag300h_leds_gpio); ++ ++ ar71xx_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(wzrhpag300h_gpio_keys), ++ wzrhpag300h_gpio_keys); ++ ++ ar71xx_add_device_spi(NULL, ar71xx_spi_info, ++ ARRAY_SIZE(ar71xx_spi_info)); ++ ++ add_mtd_concat_notifier(); ++ ++ ap94_pci_init(eeprom1, mac1, eeprom2, mac2); ++} ++ ++MIPS_MACHINE(AR71XX_MACH_WZR_HP_AG300H, "WZR-HP-AG300H", ++ "Buffalo WZR-HP-AG300H", wzrhpag300h_setup); ++ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-g300nh.c linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-g300nh.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c 2011-08-24 02:41:55.649418561 +0200 +@@ -0,0 +1,292 @@ +/* -+ * Atheros AR71xx PCI host controller driver -+ * -+ * Copyright (C) 2008-2010 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Buffalo WZR-HP-G300NH board support + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Copyright (C) 2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++#include ++#include ++#include ++#include ++#include + ++#include +#include -+#include -+ -+#undef DEBUG -+#ifdef DEBUG -+#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args) -+#else -+#define DBG(fmt, args...) -+#endif -+ -+#define AR71XX_PCI_DELAY 100 /* msecs */ -+ -+#if 0 -+#define PCI_IDSEL_BASE PCI_IDSEL_ADL_START -+#else -+#define PCI_IDSEL_BASE 0 -+#endif ++#include + -+static void __iomem *ar71xx_pcicfg_base; -+static DEFINE_SPINLOCK(ar71xx_pci_lock); -+static int ar71xx_pci_fixup_enable; ++#include "machtype.h" ++#include "devices.h" ++#include "dev-ar9xxx-wmac.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" ++#include "dev-usb.h" + -+static inline void ar71xx_pci_delay(void) -+{ -+ mdelay(AR71XX_PCI_DELAY); -+} ++#define WZRHPG300NH_GPIO_LED_USB 0 ++#define WZRHPG300NH_GPIO_LED_DIAG 1 ++#define WZRHPG300NH_GPIO_LED_WIRELESS 6 ++#define WZRHPG300NH_GPIO_LED_SECURITY 17 ++#define WZRHPG300NH_GPIO_LED_ROUTER 18 + -+/* Byte lane enable bits */ -+static u8 ble_table[4][4] = { -+ {0x0, 0xf, 0xf, 0xf}, -+ {0xe, 0xd, 0xb, 0x7}, -+ {0xc, 0xf, 0x3, 0xf}, -+ {0xf, 0xf, 0xf, 0xf}, -+}; ++#define WZRHPG300NH_GPIO_RTL8366_SDA 19 ++#define WZRHPG300NH_GPIO_RTL8366_SCK 20 + -+static inline u32 ar71xx_pci_get_ble(int where, int size, int local) -+{ -+ u32 t; ++#define WZRHPG300NH_GPIO_74HC153_S0 9 ++#define WZRHPG300NH_GPIO_74HC153_S1 11 ++#define WZRHPG300NH_GPIO_74HC153_1Y 12 ++#define WZRHPG300NH_GPIO_74HC153_2Y 14 + -+ t = ble_table[size & 3][where & 3]; -+ BUG_ON(t == 0xf); -+ t <<= (local) ? 20 : 4; -+ return t; -+} ++#define WZRHPG300NH_GPIO_EXP_BASE 32 ++#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0) ++#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1) ++#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2) ++#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3) ++#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5) ++#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6) ++#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7) + -+static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn, -+ int where) -+{ -+ u32 ret; ++#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL) + -+ if (!bus->number) { -+ /* type 0 */ -+ ret = (1 << (PCI_IDSEL_BASE + PCI_SLOT(devfn))) -+ | (PCI_FUNC(devfn) << 8) | (where & ~3); -+ } else { -+ /* type 1 */ -+ ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11) -+ | (PCI_FUNC(devfn) << 8) | (where & ~3) | 1; -+ } ++#define WZRHPG300NH_MAC_OFFSET 0x20c + -+ return ret; -+} ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition wzrhpg300nh_flash_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x0040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "u-boot-env", ++ .offset = 0x0040000, ++ .size = 0x0020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "kernel", ++ .offset = 0x0060000, ++ .size = 0x0100000, ++ }, { ++ .name = "rootfs", ++ .offset = 0x0160000, ++ .size = 0x1e60000, ++ }, { ++ .name = "user_property", ++ .offset = 0x1fc0000, ++ .size = 0x0020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "art", ++ .offset = 0x1fe0000, ++ .size = 0x0020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x0060000, ++ .size = 0x1f60000, ++ } ++}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+int ar71xx_pci_be_handler(int is_fixup) -+{ -+ void __iomem *base = ar71xx_pcicfg_base; -+ u32 pci_err; -+ u32 ahb_err; ++static struct ar91xx_flash_platform_data wzrhpg300nh_flash_data = { ++ .width = 2, ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = wzrhpg300nh_flash_partitions, ++ .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions), ++#endif ++}; + -+ pci_err = __raw_readl(base + PCI_REG_PCI_ERR) & 3; -+ if (pci_err) { -+ if (!is_fixup) -+ printk(KERN_ALERT "PCI error %d at PCI addr 0x%x\n", -+ pci_err, -+ __raw_readl(base + PCI_REG_PCI_ERR_ADDR)); ++#define WZRHPG300NH_FLASH_BASE 0x1e000000 ++#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024) + -+ __raw_writel(pci_err, base + PCI_REG_PCI_ERR); -+ } ++static struct resource wzrhpg300nh_flash_resources[] = { ++ [0] = { ++ .start = WZRHPG300NH_FLASH_BASE, ++ .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++}; + -+ ahb_err = __raw_readl(base + PCI_REG_AHB_ERR) & 1; -+ if (ahb_err) { -+ if (!is_fixup) -+ printk(KERN_ALERT "AHB error at AHB address 0x%x\n", -+ __raw_readl(base + PCI_REG_AHB_ERR_ADDR)); ++static struct platform_device wzrhpg300nh_flash_device = { ++ .name = "ar91xx-flash", ++ .id = -1, ++ .resource = wzrhpg300nh_flash_resources, ++ .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources), ++ .dev = { ++ .platform_data = &wzrhpg300nh_flash_data, ++ } ++}; + -+ __raw_writel(ahb_err, base + PCI_REG_AHB_ERR); ++static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = { ++ { ++ .name = "wzr-hp-g300nh:orange:security", ++ .gpio = WZRHPG300NH_GPIO_LED_SECURITY, ++ .active_low = 1, ++ }, { ++ .name = "wzr-hp-g300nh:green:wireless", ++ .gpio = WZRHPG300NH_GPIO_LED_WIRELESS, ++ .active_low = 1, ++ }, { ++ .name = "wzr-hp-g300nh:green:router", ++ .gpio = WZRHPG300NH_GPIO_LED_ROUTER, ++ .active_low = 1, ++ }, { ++ .name = "wzr-hp-g300nh:red:diag", ++ .gpio = WZRHPG300NH_GPIO_LED_DIAG, ++ .active_low = 1, ++ }, { ++ .name = "wzr-hp-g300nh:blue:usb", ++ .gpio = WZRHPG300NH_GPIO_LED_USB, ++ .active_low = 1, + } ++}; + -+ return ((ahb_err | pci_err) ? 1 : 0); -+} ++static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WZRHPG300NH_GPIO_BTN_RESET, ++ .active_low = 1, ++ }, { ++ .desc = "aoss", ++ .type = EV_KEY, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WZRHPG300NH_GPIO_BTN_AOSS, ++ .active_low = 1, ++ }, { ++ .desc = "usb", ++ .type = EV_KEY, ++ .code = BTN_2, ++ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WZRHPG300NH_GPIO_BTN_USB, ++ .active_low = 1, ++ }, { ++ .desc = "qos_on", ++ .type = EV_KEY, ++ .code = BTN_3, ++ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON, ++ .active_low = 0, ++ }, { ++ .desc = "qos_off", ++ .type = EV_KEY, ++ .code = BTN_4, ++ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF, ++ .active_low = 0, ++ }, { ++ .desc = "router_on", ++ .type = EV_KEY, ++ .code = BTN_5, ++ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON, ++ .active_low = 0, ++ }, { ++ .desc = "router_auto", ++ .type = EV_KEY, ++ .code = BTN_6, ++ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO, ++ .active_low = 0, ++ } ++}; + -+static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus, -+ unsigned int devfn, int where, int size, u32 cmd) -+{ -+ void __iomem *base = ar71xx_pcicfg_base; -+ u32 addr; ++static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = { ++ .gpio_base = WZRHPG300NH_GPIO_EXP_BASE, ++ .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0, ++ .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1, ++ .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y, ++ .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y, ++}; + -+ addr = ar71xx_pci_bus_addr(bus, devfn, where); ++static struct platform_device wzrhpg300nh_74hc153_device = { ++ .name = NXP_74HC153_DRIVER_NAME, ++ .id = -1, ++ .dev = { ++ .platform_data = &wzrhpg300nh_74hc153_data, ++ } ++}; + -+ DBG("PCI: set cfgaddr: %02x:%02x.%01x/%02x:%01d, addr=%08x\n", -+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), -+ where, size, addr); ++static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = { ++ .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA, ++ .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK, ++}; + -+ __raw_writel(addr, base + PCI_REG_CFG_AD); -+ __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0), -+ base + PCI_REG_CFG_CBE); ++static struct platform_device wzrhpg300nh_rtl8366s_device = { ++ .name = RTL8366S_DRIVER_NAME, ++ .id = -1, ++ .dev = { ++ .platform_data = &wzrhpg300nh_rtl8366_data, ++ } ++}; + -+ return ar71xx_pci_be_handler(1); -+} ++static struct platform_device wzrhpg300nh_rtl8366rb_device = { ++ .name = RTL8366RB_DRIVER_NAME, ++ .id = -1, ++ .dev = { ++ .platform_data = &wzrhpg300nh_rtl8366_data, ++ } ++}; + -+static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 *value) ++static void __init wzrhpg300nh_setup(void) +{ -+ void __iomem *base = ar71xx_pcicfg_base; -+ static u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; -+ unsigned long flags; -+ u32 data; -+ int ret; ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET; ++ bool hasrtl8366rb = false; + -+ ret = PCIBIOS_SUCCESSFUL; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + -+ DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d\n", bus->number, -+ PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); ++ if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB) ++ hasrtl8366rb = true; + -+ spin_lock_irqsave(&ar71xx_pci_lock, flags); ++ if (hasrtl8366rb) { ++ ar71xx_eth0_pll_data.pll_1000 = 0x1f000000; ++ ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; ++ ar71xx_eth1_pll_data.pll_1000 = 0x100; ++ ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev; ++ } else { ++ ar71xx_eth0_pll_data.pll_1000 = 0x1e000100; ++ ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; ++ ar71xx_eth1_pll_data.pll_1000 = 0x1e000100; ++ ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev; ++ } + -+ if (bus->number == 0 && devfn == 0) { -+ u32 t; ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth0_data.speed = SPEED_1000; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; + -+ t = PCI_CRP_CMD_READ | (where & ~3); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ar71xx_eth1_data.phy_mask = 0x10; + -+ __raw_writel(t, base + PCI_REG_CRP_AD_CBE); -+ data = __raw_readl(base + PCI_REG_CRP_RDDATA); ++ ar71xx_add_device_eth(0); ++ ar71xx_add_device_eth(1); + -+ DBG("PCI: rd local cfg, ad_cbe:%08x, data:%08x\n", t, data); ++ ar71xx_add_device_usb(); ++ ar9xxx_add_device_wmac(eeprom, NULL); + -+ } else { -+ int err; ++ platform_device_register(&wzrhpg300nh_74hc153_device); ++ platform_device_register(&wzrhpg300nh_flash_device); + -+ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, -+ PCI_CFG_CMD_READ); ++ if (hasrtl8366rb) ++ platform_device_register(&wzrhpg300nh_rtl8366rb_device); ++ else ++ platform_device_register(&wzrhpg300nh_rtl8366s_device); + -+ if (err == 0) { -+ data = __raw_readl(base + PCI_REG_CFG_RDDATA); -+ } else { -+ ret = PCIBIOS_DEVICE_NOT_FOUND; -+ data = ~0; -+ } -+ } ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio), ++ wzrhpg300nh_leds_gpio); + -+ spin_unlock_irqrestore(&ar71xx_pci_lock, flags); ++ ar71xx_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(wzrhpg300nh_gpio_keys), ++ wzrhpg300nh_gpio_keys); + -+ DBG("PCI: read config: data=%08x raw=%08x\n", -+ (data >> (8 * (where & 3))) & mask[size & 7], data); ++} + -+ *value = (data >> (8 * (where & 3))) & mask[size & 7]; ++MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH, "WZR-HP-G300NH", ++ "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-zcn-1523h.c linux-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-zcn-1523h.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c 2011-08-24 02:41:55.649418561 +0200 +@@ -0,0 +1,214 @@ ++/* ++ * Zcomax ZCN-1523H-2-8/5-16 board support ++ * ++ * Copyright (C) 2010 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ return ret; -+} ++#include ++#include + -+static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 value) -+{ -+ void __iomem *base = ar71xx_pcicfg_base; -+ unsigned long flags; -+ int ret; ++#include + -+ DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d value=%08x\n", -+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), -+ where, size, value); -+ -+ value = value << (8 * (where & 3)); -+ ret = PCIBIOS_SUCCESSFUL; -+ -+ spin_lock_irqsave(&ar71xx_pci_lock, flags); -+ if (bus->number == 0 && devfn == 0) { -+ u32 t; ++#include "machtype.h" ++#include "devices.h" ++#include "dev-m25p80.h" ++#include "dev-ap91-pci.h" ++#include "dev-gpio-buttons.h" ++#include "dev-leds-gpio.h" + -+ t = PCI_CRP_CMD_WRITE | (where & ~3); -+ t |= ar71xx_pci_get_ble(where, size, 1); ++#define ZCN_1523H_GPIO_BTN_RESET 0 ++#define ZCN_1523H_GPIO_LED_INIT 11 ++#define ZCN_1523H_GPIO_LED_LAN1 17 + -+ DBG("PCI: wr local cfg, ad_cbe:%08x, value:%08x\n", t, value); ++#define ZCN_1523H_2_GPIO_LED_WEAK 13 ++#define ZCN_1523H_2_GPIO_LED_MEDIUM 14 ++#define ZCN_1523H_2_GPIO_LED_STRONG 15 + -+ __raw_writel(t, base + PCI_REG_CRP_AD_CBE); -+ __raw_writel(value, base + PCI_REG_CRP_WRDATA); -+ } else { -+ int err; ++#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1 ++#define ZCN_1523H_5_GPIO_LED_LAN2 13 ++#define ZCN_1523H_5_GPIO_LED_WEAK 14 ++#define ZCN_1523H_5_GPIO_LED_MEDIUM 15 ++#define ZCN_1523H_5_GPIO_LED_STRONG 16 + -+ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, -+ PCI_CFG_CMD_WRITE); ++#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL) + -+ if (err == 0) -+ __raw_writel(value, base + PCI_REG_CFG_WRDATA); -+ else -+ ret = PCIBIOS_DEVICE_NOT_FOUND; ++#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition zcn_1523h_partitions[] = { ++ { ++ .name = "u-boot", ++ .offset = 0, ++ .size = 0x040000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "u-boot-env", ++ .offset = 0x040000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "rootfs", ++ .offset = 0x050000, ++ .size = 0x610000, ++ }, { ++ .name = "kernel", ++ .offset = 0x660000, ++ .size = 0x170000, ++ }, { ++ .name = "configure", ++ .offset = 0x7d0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "mfg", ++ .offset = 0x7e0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "eeprom", ++ .offset = 0x7f0000, ++ .size = 0x010000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "firmware", ++ .offset = 0x050000, ++ .size = 0x780000, + } -+ spin_unlock_irqrestore(&ar71xx_pci_lock, flags); -+ -+ return ret; -+} -+ -+static void ar71xx_pci_fixup(struct pci_dev *dev) -+{ -+ u32 t; -+ -+ if (!ar71xx_pci_fixup_enable) -+ return; -+ -+ if (dev->bus->number != 0 || dev->devfn != 0) -+ return; -+ -+ DBG("PCI: fixup host controller %s (%04x:%04x)\n", pci_name(dev), -+ dev->vendor, dev->device); -+ -+ /* setup COMMAND register */ -+ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE -+ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK; -+ -+ pci_write_config_word(dev, PCI_COMMAND, t); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar71xx_pci_fixup); -+ -+int __init ar71xx_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, -+ uint8_t pin) -+{ -+ int irq = -1; -+ int i; -+ -+ slot -= PCI_IDSEL_ADL_START - PCI_IDSEL_BASE; -+ -+ for (i = 0; i < ar71xx_pci_nr_irqs; i++) { -+ struct ar71xx_pci_irq *entry; ++}; ++#endif /* CONFIG_MTD_PARTITIONS */ + -+ entry = &ar71xx_pci_irq_map[i]; -+ if (entry->slot == slot && entry->pin == pin) { -+ irq = entry->irq; -+ break; -+ } -+ } ++static struct flash_platform_data zcn_1523h_flash_data = { ++#ifdef CONFIG_MTD_PARTITIONS ++ .parts = zcn_1523h_partitions, ++ .nr_parts = ARRAY_SIZE(zcn_1523h_partitions), ++#endif ++}; + -+ if (irq < 0) { -+ printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n", -+ pin, pci_name((struct pci_dev *)dev)); -+ } else { -+ printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n", -+ irq, pin, pci_name((struct pci_dev *)dev)); ++static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = { ++ { ++ .desc = "reset", ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = ZCN_1523H_GPIO_BTN_RESET, ++ .active_low = 1, + } -+ -+ return irq; -+} -+ -+static struct pci_ops ar71xx_pci_ops = { -+ .read = ar71xx_pci_read_config, -+ .write = ar71xx_pci_write_config, +}; + -+static struct resource ar71xx_pci_io_resource = { -+ .name = "PCI IO space", -+ .start = 0, -+ .end = 0, -+ .flags = IORESOURCE_IO, ++static struct gpio_led zcn_1523h_leds_gpio[] __initdata = { ++ { ++ .name = "zcn-1523h:amber:init", ++ .gpio = ZCN_1523H_GPIO_LED_INIT, ++ .active_low = 1, ++ }, { ++ .name = "zcn-1523h:green:lan1", ++ .gpio = ZCN_1523H_GPIO_LED_LAN1, ++ .active_low = 1, ++ } +}; + -+static struct resource ar71xx_pci_mem_resource = { -+ .name = "PCI memory space", -+ .start = AR71XX_PCI_MEM_BASE, -+ .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, -+ .flags = IORESOURCE_MEM ++static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = { ++ { ++ .name = "zcn-1523h:red:weak", ++ .gpio = ZCN_1523H_2_GPIO_LED_WEAK, ++ .active_low = 1, ++ }, { ++ .name = "zcn-1523h:amber:medium", ++ .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM, ++ .active_low = 1, ++ }, { ++ .name = "zcn-1523h:green:strong", ++ .gpio = ZCN_1523H_2_GPIO_LED_STRONG, ++ .active_low = 1, ++ } +}; + -+static struct pci_controller ar71xx_pci_controller = { -+ .pci_ops = &ar71xx_pci_ops, -+ .mem_resource = &ar71xx_pci_mem_resource, -+ .io_resource = &ar71xx_pci_io_resource, ++static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = { ++ { ++ .name = "zcn-1523h:red:weak", ++ .gpio = ZCN_1523H_5_GPIO_LED_WEAK, ++ .active_low = 1, ++ }, { ++ .name = "zcn-1523h:amber:medium", ++ .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM, ++ .active_low = 1, ++ }, { ++ .name = "zcn-1523h:green:strong", ++ .gpio = ZCN_1523H_5_GPIO_LED_STRONG, ++ .active_low = 1, ++ }, { ++ .name = "zcn-1523h:green:lan2", ++ .gpio = ZCN_1523H_5_GPIO_LED_LAN2, ++ .active_low = 1, ++ }, { ++ .name = "zcn-1523h:amber:unknown", ++ .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN, ++ } +}; + -+static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) ++static void __init zcn_1523h_generic_setup(void) +{ -+ void __iomem *base = ar71xx_reset_base; -+ u32 pending; -+ -+ pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & -+ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + -+ if (pending & PCI_INT_DEV0) -+ generic_handle_irq(AR71XX_PCI_IRQ_DEV0); ++ ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | ++ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | ++ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | ++ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | ++ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + -+ else if (pending & PCI_INT_DEV1) -+ generic_handle_irq(AR71XX_PCI_IRQ_DEV1); ++ ar71xx_add_device_m25p80(&zcn_1523h_flash_data); + -+ else if (pending & PCI_INT_DEV2) -+ generic_handle_irq(AR71XX_PCI_IRQ_DEV2); ++ ar71xx_add_device_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio), ++ zcn_1523h_leds_gpio); + -+ else if (pending & PCI_INT_CORE) -+ generic_handle_irq(AR71XX_PCI_IRQ_CORE); ++ ar71xx_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(zcn_1523h_gpio_keys), ++ zcn_1523h_gpio_keys); + -+ else -+ spurious_interrupt(); -+} ++ ap91_pci_init(ee, mac); + -+static void ar71xx_pci_irq_unmask(struct irq_data *d) -+{ -+ void __iomem *base = ar71xx_reset_base; -+ u32 t; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + -+ d->irq -= AR71XX_PCI_IRQ_BASE; ++ /* LAN1 port */ ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth0_data.speed = SPEED_100; ++ ar71xx_eth0_data.duplex = DUPLEX_FULL; + -+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); -+ __raw_writel(t | (1 << d->irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ /* LAN2 port */ ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; + -+ /* flush write */ -+ (void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ ar71xx_add_device_mdio(0x0); ++ ar71xx_add_device_eth(0); +} + -+static void ar71xx_pci_irq_mask(struct irq_data *d) ++static void __init zcn_1523h_2_setup(void) +{ -+ void __iomem *base = ar71xx_reset_base; -+ u32 t; ++ zcn_1523h_generic_setup(); ++ ap91_pci_setup_wmac_gpio(BIT(9), 0); + -+ d->irq -= AR71XX_PCI_IRQ_BASE; -+ -+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); -+ __raw_writel(t & ~(1 << d->irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); -+ -+ /* flush write */ -+ (void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio), ++ zcn_1523h_2_leds_gpio); +} + -+static struct irq_chip ar71xx_pci_irq_chip = { -+ .name = "AR71XX PCI ", -+ .irq_mask = ar71xx_pci_irq_mask, -+ .irq_unmask = ar71xx_pci_irq_unmask, -+ .irq_mask_ack = ar71xx_pci_irq_mask, -+}; ++MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2", ++ zcn_1523h_2_setup); + -+static void __init ar71xx_pci_irq_init(void) ++static void __init zcn_1523h_5_setup(void) +{ -+ void __iomem *base = ar71xx_reset_base; -+ int i; -+ -+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); -+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); -+ -+ for (i = AR71XX_PCI_IRQ_BASE; -+ i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) { -+ irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, -+ handle_level_irq); -+ } ++ zcn_1523h_generic_setup(); ++ ap91_pci_setup_wmac_gpio(BIT(8), 0); + -+ irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar71xx_pci_irq_handler); ++ ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio), ++ zcn_1523h_5_leds_gpio); ++ ar71xx_add_device_eth(1); +} + -+int __init ar71xx_pcibios_init(void) -+{ -+ void __iomem *ddr_base = ar71xx_ddr_base; -+ -+ ar71xx_device_stop(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE); -+ ar71xx_pci_delay(); ++MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5", ++ zcn_1523h_5_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Makefile linux-2.6.39/arch/mips/ar71xx/Makefile +--- linux-2.6.39.orig/arch/mips/ar71xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/Makefile 2011-08-24 02:41:55.677990354 +0200 +@@ -0,0 +1,67 @@ ++# ++# Makefile for the Atheros AR71xx SoC specific parts of the kernel ++# ++# Copyright (C) 2008-2009 Gabor Juhos ++# Copyright (C) 2008 Imre Kaloz ++# ++# This program is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License version 2 as published ++# by the Free Software Foundation. + -+ ar71xx_device_start(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE); -+ ar71xx_pci_delay(); ++obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o + -+ ar71xx_pcicfg_base = ioremap_nocache(AR71XX_PCI_CFG_BASE, -+ AR71XX_PCI_CFG_SIZE); -+ if (ar71xx_pcicfg_base == NULL) -+ return -ENOMEM; ++obj-$(CONFIG_EARLY_PRINTK) += early_printk.o ++obj-$(CONFIG_PCI) += pci.o + -+ __raw_writel(PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0); -+ __raw_writel(PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1); -+ __raw_writel(PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2); -+ __raw_writel(PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3); -+ __raw_writel(PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4); -+ __raw_writel(PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5); -+ __raw_writel(PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6); -+ __raw_writel(PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7); -+ -+ ar71xx_pci_delay(); -+ -+ /* clear bus errors */ -+ (void)ar71xx_pci_be_handler(1); ++obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o ++obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o ++obj-$(CONFIG_AR71XX_DEV_AR9XXX_WMAC) += dev-ar9xxx-wmac.o ++obj-$(CONFIG_AR71XX_DEV_DB120_PCI) += dev-db120-pci.o ++obj-$(CONFIG_AR71XX_DEV_DSA) += dev-dsa.o ++obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o ++obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO) += dev-leds-gpio.o ++obj-$(CONFIG_AR71XX_DEV_M25P80) += dev-m25p80.o ++obj-$(CONFIG_AR71XX_DEV_PB42_PCI) += dev-pb42-pci.o ++obj-$(CONFIG_AR71XX_DEV_PB9X_PCI) += dev-pb9x-pci.o ++obj-$(CONFIG_AR71XX_DEV_USB) += dev-usb.o + -+ ar71xx_pci_fixup_enable = 1; -+ ar71xx_pci_irq_init(); -+ register_pci_controller(&ar71xx_pci_controller); ++obj-$(CONFIG_AR71XX_NVRAM) += nvram.o ++obj-$(CONFIG_AR71XX_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o + -+ return 0; -+} -diff -Nur linux-2.6.39.orig/arch/mips/pci/pci-ar724x.c linux-2.6.39/arch/mips/pci/pci-ar724x.c ---- linux-2.6.39.orig/arch/mips/pci/pci-ar724x.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/pci/pci-ar724x.c 2011-06-01 14:02:22.000000000 +0200 -@@ -0,0 +1,394 @@ ++obj-$(CONFIG_AR71XX_MACH_AP121) += mach-ap121.o ++obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o ++obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o ++obj-$(CONFIG_AR71XX_MACH_AP96) += mach-ap96.o ++obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o ++obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o ++obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o ++obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o ++obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o ++obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o ++obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o ++obj-$(CONFIG_AR71XX_MACH_JWAP003) += mach-jwap003.o ++obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o ++obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o ++obj-$(CONFIG_AR71XX_MACH_NBG460N) += mach-nbg460n.o ++obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o ++obj-$(CONFIG_AR71XX_MACH_PB44) += mach-pb44.o ++obj-$(CONFIG_AR71XX_MACH_PB92) += mach-pb92.o ++obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o ++obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o ++obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o ++obj-$(CONFIG_AR71XX_MACH_TL_MR3X20) += mach-tl-mr3x20.o ++obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o ++obj-$(CONFIG_AR71XX_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o ++obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o ++obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o ++obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o ++obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o ++obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o ++obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o ++obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o ++obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o ++obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o ++obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o ++obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o ++obj-$(CONFIG_AR71XX_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o ++obj-$(CONFIG_AR71XX_MACH_ZCN_1523H) += mach-zcn-1523h.o +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/nvram.c linux-2.6.39/arch/mips/ar71xx/nvram.c +--- linux-2.6.39.orig/arch/mips/ar71xx/nvram.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/nvram.c 2011-08-24 02:41:55.677990354 +0200 +@@ -0,0 +1,75 @@ +/* -+ * Atheros AR724x PCI host controller driver -+ * -+ * Copyright (C) 2009-2010 Gabor Juhos ++ * Atheros AR71xx minimal nvram support + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Copyright (C) 2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include ++#include ++#include ++#include ++#include ++#include + -+#undef DEBUG -+#ifdef DEBUG -+#define DBG(fmt, args...) printk(KERN_INFO fmt, ## args) -+#else -+#define DBG(fmt, args...) -+#endif ++#include "nvram.h" + -+static void __iomem *ar724x_pci_localcfg_base; -+static void __iomem *ar724x_pci_devcfg_base; -+static void __iomem *ar724x_pci_ctrl_base; -+static int ar724x_pci_fixup_enable; ++char *nvram_find_var(const char *name, const char *buf, unsigned buf_len) ++{ ++ unsigned len = strlen(name); ++ char *cur, *last; + -+static DEFINE_SPINLOCK(ar724x_pci_lock); ++ if (buf_len == 0 || len == 0) ++ return NULL; + -+static void ar724x_pci_read(void __iomem *base, int where, int size, u32 *value) -+{ -+ unsigned long flags; -+ u32 data; ++ if (buf_len < len) ++ return NULL; + -+ spin_lock_irqsave(&ar724x_pci_lock, flags); -+ data = __raw_readl(base + (where & ~3)); ++ if (len == 1) ++ return memchr(buf, (int) *name, buf_len); + -+ switch (size) { -+ case 1: -+ if (where & 1) -+ data >>= 8; -+ if (where & 2) -+ data >>= 16; -+ data &= 0xFF; -+ break; -+ case 2: -+ if (where & 2) -+ data >>= 16; -+ data &= 0xFFFF; -+ break; -+ } ++ last = (char *) buf + buf_len - len; ++ for (cur = (char *) buf; cur <= last; cur++) ++ if (cur[0] == name[0] && memcmp(cur, name, len) == 0) ++ return cur + len; + -+ *value = data; -+ spin_unlock_irqrestore(&ar724x_pci_lock, flags); ++ return NULL; +} + -+static void ar724x_pci_write(void __iomem *base, int where, int size, u32 value) ++int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, ++ const char *name, char *mac) +{ -+ unsigned long flags; -+ u32 data; -+ int s; ++ char *buf; ++ char *mac_str; ++ int ret; ++ int t; + -+ spin_lock_irqsave(&ar724x_pci_lock, flags); -+ data = __raw_readl(base + (where & ~3)); ++ buf = vmalloc(nvram_len); ++ if (!buf) ++ return -ENOMEM; + -+ switch (size) { -+ case 1: -+ s = ((where & 3) << 3); -+ data &= ~(0xFF << s); -+ data |= ((value & 0xFF) << s); -+ break; -+ case 2: -+ s = ((where & 2) << 3); -+ data &= ~(0xFFFF << s); -+ data |= ((value & 0xFFFF) << s); -+ break; -+ case 4: -+ data = value; -+ break; ++ memcpy(buf, nvram, nvram_len); ++ buf[nvram_len - 1] = '\0'; ++ ++ mac_str = nvram_find_var(name, buf, nvram_len); ++ if (!mac_str) { ++ ret = -EINVAL; ++ goto free; + } + -+ __raw_writel(data, base + (where & ~3)); -+ /* flush write */ -+ (void)__raw_readl(base + (where & ~3)); -+ spin_unlock_irqrestore(&ar724x_pci_lock, flags); -+} ++ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", ++ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]); + -+static int ar724x_pci_read_config(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 *value) -+{ ++ if (t != 6) { ++ ret = -EINVAL; ++ goto free; ++ } + -+ if (bus->number != 0 || devfn != 0) -+ return PCIBIOS_DEVICE_NOT_FOUND; ++ ret = 0; + -+ ar724x_pci_read(ar724x_pci_devcfg_base, where, size, value); ++free: ++ vfree(buf); ++ return ret; ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/nvram.h linux-2.6.39/arch/mips/ar71xx/nvram.h +--- linux-2.6.39.orig/arch/mips/ar71xx/nvram.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/nvram.h 2011-08-24 02:41:55.687991145 +0200 +@@ -0,0 +1,19 @@ ++/* ++ * Atheros AR71xx minimal nvram support ++ * ++ * Copyright (C) 2009 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d, value=%08x\n", -+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), -+ where, size, *value); ++#ifndef _AR71XX_NVRAM_H ++#define _AR71XX_NVRAM_H + -+ /* -+ * WAR for BAR issue - We are unable to access the PCI device space -+ * if we set the BAR with proper base address -+ */ -+ if ((where == 0x10) && (size == 4)) { -+ if (ar71xx_soc == AR71XX_SOC_AR7240) -+ ar724x_pci_write(ar724x_pci_devcfg_base, where, size, 0xffff); -+ else -+ ar724x_pci_write(ar724x_pci_devcfg_base, where, size, 0x1000ffff); -+ } ++char *nvram_find_var(const char *name, const char *buf, ++ unsigned buf_len) __init; ++int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len, ++ const char *name, char *mac) __init; + -+ return PCIBIOS_SUCCESSFUL; -+} ++#endif /* _AR71XX_NVRAM_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.c linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c +--- linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c 2011-08-24 02:41:55.697990606 +0200 +@@ -0,0 +1,123 @@ ++/* ++ * Atheros AP94 reference board PCI initialization ++ * ++ * Copyright (C) 2009-2010 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+static int ar724x_pci_write_config(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 value) -+{ -+ if (bus->number != 0 || devfn != 0) -+ return PCIBIOS_DEVICE_NOT_FOUND; ++#include ++#include + -+ DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d, value=%08x\n", -+ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), -+ where, size, value); ++#include ++#include + -+ ar724x_pci_write(ar724x_pci_devcfg_base, where, size, value); ++struct ath9k_fixup { ++ u16 *cal_data; ++ unsigned slot; ++}; + -+ return PCIBIOS_SUCCESSFUL; -+} ++static int ath9k_num_fixups; ++static struct ath9k_fixup ath9k_fixups[2]; + -+static void ar724x_pci_fixup(struct pci_dev *dev) ++static void ath9k_pci_fixup(struct pci_dev *dev) +{ ++ void __iomem *mem; ++ u16 *cal_data = NULL; + u16 cmd; ++ u32 bar0; ++ u32 val; ++ unsigned i; + -+ if (!ar724x_pci_fixup_enable) ++ for (i = 0; i < ath9k_num_fixups; i++) { ++ if (ath9k_fixups[i].cal_data == NULL) ++ continue; ++ ++ if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn)) ++ continue; ++ ++ cal_data = ath9k_fixups[i].cal_data; ++ break; ++ } ++ ++ if (cal_data == NULL) + return; + -+ if (dev->bus->number != 0 || dev->devfn != 0) ++ if (*cal_data != 0xa55a) { ++ pr_err("pci %s: invalid calibration data\n", pci_name(dev)); + return; ++ } + -+ /* setup COMMAND register */ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | -+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | -+ PCI_COMMAND_FAST_BACK; ++ pr_info("pci %s: fixup device configuration\n", pci_name(dev)); + -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar724x_pci_fixup); ++ mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000); ++ if (!mem) { ++ pr_err("pci %s: ioremap error\n", pci_name(dev)); ++ return; ++ } + -+int __init ar724x_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, -+ uint8_t pin) -+{ -+ int irq = -1; -+ int i; ++ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); + -+ for (i = 0; i < ar71xx_pci_nr_irqs; i++) { -+ struct ar71xx_pci_irq *entry; -+ entry = &ar71xx_pci_irq_map[i]; ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7161: ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, ++ AR71XX_PCI_MEM_BASE); ++ break; ++ case AR71XX_SOC_AR7240: ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff); ++ break; + -+ if (entry->slot == slot && entry->pin == pin) { -+ irq = entry->irq; -+ break; -+ } ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff); ++ break; ++ ++ default: ++ BUG(); + } + -+ if (irq < 0) -+ printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n", -+ pin, pci_name((struct pci_dev *)dev)); -+ else -+ printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n", -+ irq, pin, pci_name((struct pci_dev *)dev)); ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ pci_write_config_word(dev, PCI_COMMAND, cmd); + -+ return irq; -+} ++ /* set pointer to first reg address */ ++ cal_data += 3; ++ while (*cal_data != 0xffff) { ++ u32 reg; ++ reg = *cal_data++; ++ val = *cal_data++; ++ val |= (*cal_data++) << 16; + -+static struct pci_ops ar724x_pci_ops = { -+ .read = ar724x_pci_read_config, -+ .write = ar724x_pci_write_config, -+}; ++ __raw_writel(val, mem + reg); ++ udelay(100); ++ } + -+static struct resource ar724x_pci_io_resource = { -+ .name = "PCI IO space", -+ .start = 0, -+ .end = 0, -+ .flags = IORESOURCE_IO, -+}; ++ pci_read_config_dword(dev, PCI_VENDOR_ID, &val); ++ dev->vendor = val & 0xffff; ++ dev->device = (val >> 16) & 0xffff; + -+static struct resource ar724x_pci_mem_resource = { -+ .name = "PCI memory space", -+ .start = AR71XX_PCI_MEM_BASE, -+ .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, -+ .flags = IORESOURCE_MEM -+}; ++ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); ++ dev->revision = val & 0xff; ++ dev->class = val >> 8; /* upper 3 bytes */ + -+static struct pci_controller ar724x_pci_controller = { -+ .pci_ops = &ar724x_pci_ops, -+ .mem_resource = &ar724x_pci_mem_resource, -+ .io_resource = &ar724x_pci_io_resource, -+}; ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); ++ pci_write_config_word(dev, PCI_COMMAND, cmd); + -+static void __init ar724x_pci_reset(void) -+{ -+ ar71xx_device_stop(AR724X_RESET_PCIE); -+ ar71xx_device_stop(AR724X_RESET_PCIE_PHY); -+ ar71xx_device_stop(AR724X_RESET_PCIE_PHY_SERIAL); -+ udelay(100); ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); + -+ ar71xx_device_start(AR724X_RESET_PCIE_PHY_SERIAL); -+ udelay(100); -+ ar71xx_device_start(AR724X_RESET_PCIE_PHY); -+ ar71xx_device_start(AR724X_RESET_PCIE); ++ iounmap(mem); +} ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); + -+static int __init ar724x_pci_setup(void) ++void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) +{ -+ void __iomem *base = ar724x_pci_ctrl_base; -+ u32 t; ++ if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) ++ return; + -+ /* setup COMMAND register */ -+ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | -+ PCI_COMMAND_PARITY|PCI_COMMAND_SERR|PCI_COMMAND_FAST_BACK; ++ ath9k_fixups[ath9k_num_fixups].slot = slot; ++ ath9k_fixups[ath9k_num_fixups].cal_data = cal_data; ++ ath9k_num_fixups++; ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.h linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h +--- linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h 2011-08-24 02:41:55.697990606 +0200 +@@ -0,0 +1,6 @@ ++#ifndef _PCI_ATH9K_FIXUP ++#define _PCI_ATH9K_FIXUP + -+ ar724x_pci_write(ar724x_pci_localcfg_base, PCI_COMMAND, 4, t); -+ ar724x_pci_write(ar724x_pci_localcfg_base, 0x20, 4, 0x1ff01000); -+ ar724x_pci_write(ar724x_pci_localcfg_base, 0x24, 4, 0x1ff01000); ++void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init; + -+ t = __raw_readl(base + AR724X_PCI_REG_RESET); -+ if (t != 0x7) { -+ udelay(100000); -+ __raw_writel(0, base + AR724X_PCI_REG_RESET); -+ udelay(100); -+ __raw_writel(4, base + AR724X_PCI_REG_RESET); -+ udelay(100000); -+ } ++#endif /* _PCI_ATH9K_FIXUP */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci.c linux-2.6.39/arch/mips/ar71xx/pci.c +--- linux-2.6.39.orig/arch/mips/ar71xx/pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/pci.c 2011-08-24 02:41:55.697990606 +0200 +@@ -0,0 +1,97 @@ ++/* ++ * Atheros AR71xx PCI setup code ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ if (ar71xx_soc == AR71XX_SOC_AR7240) -+ t = AR724X_PCI_APP_LTSSM_ENABLE; -+ else -+ t = 0x1ffc1; -+ __raw_writel(t, base + AR724X_PCI_REG_APP); -+ /* flush write */ -+ (void) __raw_readl(base + AR724X_PCI_REG_APP); -+ udelay(1000); ++#include + -+ t = __raw_readl(base + AR724X_PCI_REG_RESET); -+ if ((t & AR724X_PCI_RESET_LINK_UP) == 0x0) { -+ printk(KERN_WARNING "PCI: no PCIe module found\n"); -+ return -ENODEV; -+ } ++#include + -+ if (ar71xx_soc == AR71XX_SOC_AR7241 || ar71xx_soc == AR71XX_SOC_AR7242) { -+ t = __raw_readl(base + AR724X_PCI_REG_APP); -+ t |= BIT(16); -+ __raw_writel(t, base + AR724X_PCI_REG_APP); -+ } ++#include ++#include + -+ return 0; -+} ++unsigned ar71xx_pci_nr_irqs __initdata; ++struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata; + -+static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc) -+{ -+ void __iomem *base = ar724x_pci_ctrl_base; -+ u32 pending; ++int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev); + -+ pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & -+ __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++static int ar71xx_be_handler(struct pt_regs *regs, int is_fixup) ++{ ++ int err = 0; + -+ if (pending & AR724X_PCI_INT_DEV0) -+ generic_handle_irq(AR71XX_PCI_IRQ_DEV0); ++ err = ar71xx_pci_be_handler(is_fixup); + -+ else -+ spurious_interrupt(); ++ return (is_fixup && !err) ? MIPS_BE_FIXUP : MIPS_BE_FATAL; +} + -+static void ar724x_pci_irq_unmask(struct irq_data *d) ++int pcibios_plat_dev_init(struct pci_dev *dev) +{ -+ void __iomem *base = ar724x_pci_ctrl_base; -+ u32 t; -+ -+ switch (d->irq) { -+ case AR71XX_PCI_IRQ_DEV0: -+ d->irq -= AR71XX_PCI_IRQ_BASE; ++ if (ar71xx_pci_plat_dev_init) ++ return ar71xx_pci_plat_dev_init(dev); + -+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); -+ __raw_writel(t | AR724X_PCI_INT_DEV0, -+ base + AR724X_PCI_REG_INT_MASK); -+ /* flush write */ -+ (void) __raw_readl(base + AR724X_PCI_REG_INT_MASK); -+ } ++ return 0; +} + -+static void ar724x_pci_irq_mask(struct irq_data *d) ++int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) +{ -+ void __iomem *base = ar724x_pci_ctrl_base; -+ u32 t; -+ -+ switch (d->irq) { -+ case AR71XX_PCI_IRQ_DEV0: -+ d->irq -= AR71XX_PCI_IRQ_BASE; -+ -+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); -+ __raw_writel(t & ~AR724X_PCI_INT_DEV0, -+ base + AR724X_PCI_REG_INT_MASK); ++ int ret = 0; + -+ /* flush write */ -+ (void) __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ ret = ar71xx_pcibios_map_irq(dev, slot, pin); ++ break; + -+ t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS); -+ __raw_writel(t | AR724X_PCI_INT_DEV0, -+ base + AR724X_PCI_REG_INT_STATUS); ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ ret = ar724x_pcibios_map_irq(dev, slot, pin); ++ break; + -+ /* flush write */ -+ (void) __raw_readl(base + AR724X_PCI_REG_INT_STATUS); ++ default: ++ break; + } -+} + -+static struct irq_chip ar724x_pci_irq_chip = { -+ .name = "AR724X PCI ", -+ .irq_mask = ar724x_pci_irq_mask, -+ .irq_unmask = ar724x_pci_irq_unmask, -+ .irq_mask_ack = ar724x_pci_irq_mask, -+}; ++ return ret; ++} + -+static void __init ar724x_pci_irq_init(void) ++int __init ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) +{ -+ void __iomem *base = ar724x_pci_ctrl_base; -+ u32 t; -+ int i; ++ int ret = 0; + -+ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); -+ if (t & (AR724X_RESET_PCIE | AR724X_RESET_PCIE_PHY | -+ AR724X_RESET_PCIE_PHY_SERIAL)) { -+ return; -+ } ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ board_be_handler = ar71xx_be_handler; ++ ret = ar71xx_pcibios_init(); ++ break; + -+ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); -+ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ ret = ar724x_pcibios_init(); ++ break; + -+ for (i = AR71XX_PCI_IRQ_BASE; -+ i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) { -+ irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, -+ handle_level_irq); ++ default: ++ return 0; + } + -+ irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar724x_pci_irq_handler); -+} -+ -+int __init ar724x_pcibios_init(void) -+{ -+ int ret = -ENOMEM; -+ -+ ar724x_pci_localcfg_base = ioremap_nocache(AR724X_PCI_CRP_BASE, -+ AR724X_PCI_CRP_SIZE); -+ if (ar724x_pci_localcfg_base == NULL) -+ goto err; -+ -+ ar724x_pci_devcfg_base = ioremap_nocache(AR724X_PCI_CFG_BASE, -+ AR724X_PCI_CFG_SIZE); -+ if (ar724x_pci_devcfg_base == NULL) -+ goto err_unmap_localcfg; -+ -+ ar724x_pci_ctrl_base = ioremap_nocache(AR724X_PCI_CTRL_BASE, -+ AR724X_PCI_CTRL_SIZE); -+ if (ar724x_pci_ctrl_base == NULL) -+ goto err_unmap_devcfg; -+ -+ ar724x_pci_reset(); -+ ret = ar724x_pci_setup(); -+ if (ret) -+ goto err_unmap_ctrl; -+ -+ ar724x_pci_fixup_enable = 1; -+ ar724x_pci_irq_init(); -+ register_pci_controller(&ar724x_pci_controller); -+ -+ return 0; ++ ar71xx_pci_nr_irqs = nr_irqs; ++ ar71xx_pci_irq_map = map; + -+ err_unmap_ctrl: -+ iounmap(ar724x_pci_ctrl_base); -+ err_unmap_devcfg: -+ iounmap(ar724x_pci_devcfg_base); -+ err_unmap_localcfg: -+ iounmap(ar724x_pci_localcfg_base); -+ err: + return ret; +} -diff -Nur linux-2.6.39.orig/drivers/char/Kconfig linux-2.6.39/drivers/char/Kconfig ---- linux-2.6.39.orig/drivers/char/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/char/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -511,6 +511,14 @@ - pc8736x_gpio drivers. If those drivers are built as - modules, this one will be too, named nsc_gpio - -+config GPIO_DEVICE -+ tristate "GPIO device support" -+ depends on GENERIC_GPIO -+ help -+ Say Y to enable Linux GPIO device support. This allows control of -+ GPIO pins using a character device -+ -+ - config RAW_DRIVER - tristate "RAW driver (/dev/raw/rawN)" - depends on BLOCK -diff -Nur linux-2.6.39.orig/drivers/char/Makefile linux-2.6.39/drivers/char/Makefile ---- linux-2.6.39.orig/drivers/char/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/char/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -47,6 +47,7 @@ - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o -+obj-$(CONFIG_GPIO_DEVICE) += gpio_dev.o - obj-$(CONFIG_GPIO_TB0219) += tb0219.o - obj-$(CONFIG_TELCLOCK) += tlclk.o - -diff -Nur linux-2.6.39.orig/drivers/gpio/nxp_74hc153.c linux-2.6.39/drivers/gpio/nxp_74hc153.c ---- linux-2.6.39.orig/drivers/gpio/nxp_74hc153.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/gpio/nxp_74hc153.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,246 @@ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/prom.c linux-2.6.39/arch/mips/ar71xx/prom.c +--- linux-2.6.39.orig/arch/mips/ar71xx/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/prom.c 2011-08-24 02:41:55.737990425 +0200 +@@ -0,0 +1,189 @@ +/* -+ * NXP 74HC153 - Dual 4-input multiplexer GPIO driver ++ * Atheros AR71xx SoC specific prom routines + * -+ * Copyright (C) 2010 Gabor Juhos ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. + */ + -+#include ++#include +#include -+#include -+#include -+#include ++#include ++#include + -+#define NXP_74HC153_NUM_GPIOS 8 -+#define NXP_74HC153_S0_MASK 0x1 -+#define NXP_74HC153_S1_MASK 0x2 -+#define NXP_74HC153_BANK_MASK 0x4 ++#include ++#include ++#include + -+struct nxp_74hc153_chip { -+ struct device *parent; -+ struct gpio_chip gpio_chip; -+ struct mutex lock; -+}; ++#include + -+static struct nxp_74hc153_chip *gpio_to_nxp(struct gpio_chip *gc) ++static inline int is_valid_ram_addr(void *addr) +{ -+ return container_of(gc, struct nxp_74hc153_chip, gpio_chip); -+} ++ if (((u32) addr > KSEG0) && ++ ((u32) addr < (KSEG0 + AR71XX_MEM_SIZE_MAX))) ++ return 1; ++ ++ if (((u32) addr > KSEG1) && ++ ((u32) addr < (KSEG1 + AR71XX_MEM_SIZE_MAX))) ++ return 1; + -+static int nxp_74hc153_direction_input(struct gpio_chip *gc, unsigned offset) -+{ + return 0; +} + -+static int nxp_74hc153_direction_output(struct gpio_chip *gc, -+ unsigned offset, int val) ++static void __init ar71xx_prom_append_cmdline(const char *name, ++ const char *value) +{ -+ return -EINVAL; ++ char buf[COMMAND_LINE_SIZE]; ++ ++ snprintf(buf, sizeof(buf), " %s=%s", name, value); ++ strlcat(arcs_cmdline, buf, sizeof(arcs_cmdline)); +} + -+static int nxp_74hc153_get_value(struct gpio_chip *gc, unsigned offset) ++static const char * __init ar71xx_prom_find_env(char **envp, const char *name) +{ -+ struct nxp_74hc153_chip *nxp; -+ struct nxp_74hc153_platform_data *pdata; -+ unsigned s0; -+ unsigned s1; -+ unsigned pin; -+ int ret; ++ const char *ret = NULL; ++ int len; ++ char **p; + -+ nxp = gpio_to_nxp(gc); -+ pdata = nxp->parent->platform_data; ++ if (!is_valid_ram_addr(envp)) ++ return NULL; + -+ s0 = !!(offset & NXP_74HC153_S0_MASK); -+ s1 = !!(offset & NXP_74HC153_S1_MASK); -+ pin = (offset & NXP_74HC153_BANK_MASK) ? pdata->gpio_pin_2y -+ : pdata->gpio_pin_1y; ++ len = strlen(name); ++ for (p = envp; is_valid_ram_addr(*p); p++) { ++ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') { ++ ret = *p + len + 1; ++ break; ++ } + -+ mutex_lock(&nxp->lock); -+ gpio_set_value(pdata->gpio_pin_s0, s0); -+ gpio_set_value(pdata->gpio_pin_s1, s1); -+ ret = gpio_get_value(pin); -+ mutex_unlock(&nxp->lock); ++ /* RedBoot env comes in pointer pairs - key, value */ ++ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0) ++ if (is_valid_ram_addr(*(++p))) { ++ ret = *p; ++ break; ++ } ++ } + + return ret; +} + -+static void nxp_74hc153_set_value(struct gpio_chip *gc, -+ unsigned offset, int val) -+{ -+ /* not supported */ -+} -+ -+static int __devinit nxp_74hc153_probe(struct platform_device *pdev) ++static int __init ar71xx_prom_init_myloader(void) +{ -+ struct nxp_74hc153_platform_data *pdata; -+ struct nxp_74hc153_chip *nxp; -+ struct gpio_chip *gc; -+ int err; ++ struct myloader_info *mylo; ++ char mac_buf[32]; ++ char *mac; + -+ pdata = pdev->dev.platform_data; -+ if (pdata == NULL) { -+ dev_dbg(&pdev->dev, "no platform data specified\n"); -+ return -EINVAL; -+ } ++ mylo = myloader_get_info(); ++ if (!mylo) ++ return 0; + -+ nxp = kzalloc(sizeof(struct nxp_74hc153_chip), GFP_KERNEL); -+ if (nxp == NULL) { -+ dev_err(&pdev->dev, "no memory for private data\n"); -+ return -ENOMEM; ++ switch (mylo->did) { ++ case DEVID_COMPEX_WP543: ++ ar71xx_prom_append_cmdline("board", "WP543"); ++ break; ++ default: ++ printk(KERN_WARNING "prom: unknown device id: %x\n", ++ mylo->did); ++ return 0; + } + -+ err = gpio_request(pdata->gpio_pin_s0, dev_name(&pdev->dev)); -+ if (err) { -+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", -+ pdata->gpio_pin_s0, err); -+ goto err_free_nxp; -+ } ++ mac = mylo->macs[0]; ++ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x", ++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); + -+ err = gpio_request(pdata->gpio_pin_s1, dev_name(&pdev->dev)); -+ if (err) { -+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", -+ pdata->gpio_pin_s1, err); -+ goto err_free_s0; -+ } ++ ar71xx_prom_append_cmdline("ethaddr", mac_buf); + -+ err = gpio_request(pdata->gpio_pin_1y, dev_name(&pdev->dev)); -+ if (err) { -+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", -+ pdata->gpio_pin_1y, err); -+ goto err_free_s1; -+ } ++ return 1; ++} + -+ err = gpio_request(pdata->gpio_pin_2y, dev_name(&pdev->dev)); -+ if (err) { -+ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", -+ pdata->gpio_pin_2y, err); -+ goto err_free_1y; -+ } ++#ifdef CONFIG_IMAGE_CMDLINE_HACK ++extern char __image_cmdline[]; + -+ err = gpio_direction_output(pdata->gpio_pin_s0, 0); -+ if (err) { -+ dev_err(&pdev->dev, -+ "unable to set direction of gpio %u, err=%d\n", -+ pdata->gpio_pin_s0, err); -+ goto err_free_2y; -+ } ++static int __init ar71xx_use__image_cmdline(void) ++{ ++ char *p = __image_cmdline; ++ int replace = 0; + -+ err = gpio_direction_output(pdata->gpio_pin_s1, 0); -+ if (err) { -+ dev_err(&pdev->dev, -+ "unable to set direction of gpio %u, err=%d\n", -+ pdata->gpio_pin_s1, err); -+ goto err_free_2y; ++ if (*p == '-') { ++ replace = 1; ++ p++; + } + -+ err = gpio_direction_input(pdata->gpio_pin_1y); -+ if (err) { -+ dev_err(&pdev->dev, -+ "unable to set direction of gpio %u, err=%d\n", -+ pdata->gpio_pin_1y, err); -+ goto err_free_2y; -+ } ++ if (*p == '\0') ++ return 0; + -+ err = gpio_direction_input(pdata->gpio_pin_2y); -+ if (err) { -+ dev_err(&pdev->dev, -+ "unable to set direction of gpio %u, err=%d\n", -+ pdata->gpio_pin_2y, err); -+ goto err_free_2y; ++ if (replace) { ++ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); ++ } else { ++ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); ++ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); + } + -+ nxp->parent = &pdev->dev; -+ mutex_init(&nxp->lock); -+ -+ gc = &nxp->gpio_chip; -+ -+ gc->direction_input = nxp_74hc153_direction_input; -+ gc->direction_output = nxp_74hc153_direction_output; -+ gc->get = nxp_74hc153_get_value; -+ gc->set = nxp_74hc153_set_value; -+ gc->can_sleep = 1; ++ return 1; ++} ++#else ++static inline int ar71xx_use__image_cmdline(void) { return 0; } ++#endif + -+ gc->base = pdata->gpio_base; -+ gc->ngpio = NXP_74HC153_NUM_GPIOS; -+ gc->label = dev_name(nxp->parent); -+ gc->dev = nxp->parent; -+ gc->owner = THIS_MODULE; ++static __init void ar71xx_prom_init_cmdline(int argc, char **argv) ++{ ++ int i; + -+ err = gpiochip_add(&nxp->gpio_chip); -+ if (err) { -+ dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err); -+ goto err_free_2y; -+ } ++ if (ar71xx_use__image_cmdline()) ++ return; + -+ platform_set_drvdata(pdev, nxp); -+ return 0; ++ if (!is_valid_ram_addr(argv)) ++ return; + -+ err_free_2y: -+ gpio_free(pdata->gpio_pin_2y); -+ err_free_1y: -+ gpio_free(pdata->gpio_pin_1y); -+ err_free_s1: -+ gpio_free(pdata->gpio_pin_s1); -+ err_free_s0: -+ gpio_free(pdata->gpio_pin_s0); -+ err_free_nxp: -+ kfree(nxp); -+ return err; ++ for (i = 0; i < argc; i++) ++ if (is_valid_ram_addr(argv[i])) { ++ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); ++ strlcat(arcs_cmdline, argv[i], sizeof(arcs_cmdline)); ++ } +} + -+static int nxp_74hc153_remove(struct platform_device *pdev) ++void __init prom_init(void) +{ -+ struct nxp_74hc153_chip *nxp = platform_get_drvdata(pdev); -+ struct nxp_74hc153_platform_data *pdata = pdev->dev.platform_data; ++ const char *env; ++ char **envp; + -+ if (nxp) { -+ int err; ++ printk(KERN_DEBUG "prom: fw_arg0=%08x, fw_arg1=%08x, " ++ "fw_arg2=%08x, fw_arg3=%08x\n", ++ (unsigned int)fw_arg0, (unsigned int)fw_arg1, ++ (unsigned int)fw_arg2, (unsigned int)fw_arg3); + -+ err = gpiochip_remove(&nxp->gpio_chip); -+ if (err) { -+ dev_err(&pdev->dev, -+ "unable to remove gpio chip, err=%d\n", -+ err); -+ return err; -+ } + -+ gpio_free(pdata->gpio_pin_2y); -+ gpio_free(pdata->gpio_pin_1y); -+ gpio_free(pdata->gpio_pin_s1); -+ gpio_free(pdata->gpio_pin_s0); ++ if (ar71xx_prom_init_myloader()) ++ return; + -+ kfree(nxp); -+ platform_set_drvdata(pdev, NULL); ++ ar71xx_prom_init_cmdline(fw_arg0, (char **)fw_arg1); ++ ++ envp = (char **)fw_arg2; ++ if (!strstr(arcs_cmdline, "ethaddr=")) { ++ env = ar71xx_prom_find_env(envp, "ethaddr"); ++ if (env) ++ ar71xx_prom_append_cmdline("ethaddr", env); + } + -+ return 0; -+} ++ if (!strstr(arcs_cmdline, "board=")) { ++ env = ar71xx_prom_find_env(envp, "board"); ++ if (env) { ++ /* Workaround for buggy bootloaders */ ++ if (strcmp(env, "RouterStation") == 0 || ++ strcmp(env, "Ubiquiti AR71xx-based board") == 0) ++ env = "UBNT-RS"; + -+static struct platform_driver nxp_74hc153_driver = { -+ .probe = nxp_74hc153_probe, -+ .remove = __devexit_p(nxp_74hc153_remove), -+ .driver = { -+ .name = NXP_74HC153_DRIVER_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; ++ if (strcmp(env, "RouterStation PRO") == 0) ++ env = "UBNT-RSPRO"; + -+static int __init nxp_74hc153_init(void) -+{ -+ return platform_driver_register(&nxp_74hc153_driver); ++ ar71xx_prom_append_cmdline("board", env); ++ } ++ } +} -+subsys_initcall(nxp_74hc153_init); + -+static void __exit nxp_74hc153_exit(void) ++void __init prom_free_prom_memory(void) +{ -+ platform_driver_unregister(&nxp_74hc153_driver); ++ /* We do not have to prom memory to free */ +} -+module_exit(nxp_74hc153_exit); -+ -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC153"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:" NXP_74HC153_DRIVER_NAME); -diff -Nur linux-2.6.39.orig/drivers/input/misc/Kconfig linux-2.6.39/drivers/input/misc/Kconfig ---- linux-2.6.39.orig/drivers/input/misc/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/input/misc/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -467,4 +467,20 @@ - To compile this driver as a module, choose M here: the - module will be called xen-kbdfront. - -+config INPUT_GPIO_BUTTONS -+ tristate "Polled GPIO buttons interface" -+ depends on GENERIC_GPIO -+ select INPUT_POLLDEV -+ help -+ This driver implements support for buttons connected -+ to GPIO pins of various CPUs (and some other chips). -+ -+ Say Y here if your device has buttons connected -+ directly to such GPIO pins. Your board-specific -+ setup logic must also provide a platform device, -+ with configuration data saying which GPIOs are used. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called gpio-buttons. -+ - endif -diff -Nur linux-2.6.39.orig/drivers/input/misc/Makefile linux-2.6.39/drivers/input/misc/Makefile ---- linux-2.6.39.orig/drivers/input/misc/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/input/misc/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -44,4 +44,5 @@ - obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o - obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o - obj-$(CONFIG_INPUT_YEALINK) += yealink.o -+obj-$(CONFIG_INPUT_GPIO_BUTTONS) += gpio_buttons.o - -diff -Nur linux-2.6.39.orig/drivers/input/misc/gpio_buttons.c linux-2.6.39/drivers/input/misc/gpio_buttons.c ---- linux-2.6.39.orig/drivers/input/misc/gpio_buttons.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/input/misc/gpio_buttons.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,216 @@ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/setup.c linux-2.6.39/arch/mips/ar71xx/setup.c +--- linux-2.6.39.orig/arch/mips/ar71xx/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/setup.c 2011-08-24 02:41:55.737990425 +0200 +@@ -0,0 +1,446 @@ +/* -+ * Driver for buttons on GPIO lines not capable of generating interrupts -+ * -+ * Copyright (C) 2007-2010 Gabor Juhos -+ * Copyright (C) 2010 Nuno Goncalves -+ * -+ * This file was based on: /drivers/input/misc/cobalt_btns.c -+ * Copyright (C) 2007 Yoichi Yuasa ++ * Atheros AR71xx SoC specific setup + * -+ * also was based on: /drivers/input/keyboard/gpio_keys.c -+ * Copyright 2005 Phil Blundell ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. ++ * Parts of this file are based on Atheros 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.31 BSP + * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. + */ + +#include -+#include +#include -+#include ++#include + -+#include -+#include -+#include -+#include ++#include ++#include /* for mips_hpt_frequency */ ++#include /* for _machine_{restart,halt} */ ++#include + -+#include ++#include + -+#include ++#include "machtype.h" ++#include "devices.h" + -+#define DRV_NAME "gpio-buttons" -+#define DRV_VERSION "0.1.2" -+#define PFX DRV_NAME ": " ++#define AR71XX_SYS_TYPE_LEN 64 + -+struct gpio_button_data { -+ int last_state; -+ int count; -+}; ++u32 ar71xx_cpu_freq; ++EXPORT_SYMBOL_GPL(ar71xx_cpu_freq); + -+struct gpio_buttons_dev { -+ struct input_polled_dev *poll_dev; -+ struct gpio_buttons_platform_data *pdata; -+ struct gpio_button_data *data; -+}; ++u32 ar71xx_ahb_freq; ++EXPORT_SYMBOL_GPL(ar71xx_ahb_freq); + -+static void gpio_buttons_poll(struct input_polled_dev *dev) -+{ -+ struct gpio_buttons_dev *bdev = dev->private; -+ struct gpio_buttons_platform_data *pdata = bdev->pdata; -+ struct input_dev *input = dev->input; -+ int i; ++u32 ar71xx_ddr_freq; ++EXPORT_SYMBOL_GPL(ar71xx_ddr_freq); + -+ for (i = 0; i < bdev->pdata->nbuttons; i++) { -+ struct gpio_button *button = &pdata->buttons[i]; -+ unsigned int type = button->type ?: EV_KEY; -+ int state; ++u32 ar71xx_ref_freq; ++EXPORT_SYMBOL_GPL(ar71xx_ref_freq); + -+ if (bdev->data[i].count < button->threshold) { -+ bdev->data[i].count++; -+ continue; -+ } ++enum ar71xx_soc_type ar71xx_soc; ++EXPORT_SYMBOL_GPL(ar71xx_soc); + -+ state = gpio_get_value(button->gpio) ? 1 : 0; -+ if (state != bdev->data[i].last_state) { -+ input_event(input, type, button->code, -+ !!(state ^ button->active_low)); -+ input_sync(input); -+ bdev->data[i].count = 0; -+ bdev->data[i].last_state = state; -+ } -+ } ++u32 ar71xx_soc_rev; ++EXPORT_SYMBOL_GPL(ar71xx_soc_rev); ++ ++static char ar71xx_sys_type[AR71XX_SYS_TYPE_LEN]; ++ ++static void ar71xx_restart(char *command) ++{ ++ ar71xx_device_stop(RESET_MODULE_FULL_CHIP); ++ for (;;) ++ if (cpu_wait) ++ cpu_wait(); +} + -+static int __devinit gpio_buttons_probe(struct platform_device *pdev) ++static void ar71xx_halt(void) +{ -+ struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data; -+ struct gpio_buttons_dev *bdev; -+ struct input_polled_dev *poll_dev; -+ struct input_dev *input; -+ int error, i; ++ while (1) ++ cpu_wait(); ++} + -+ if (!pdata) -+ return -ENXIO; ++static void __init ar71xx_detect_mem_size(void) ++{ ++ unsigned long size; + -+ bdev = kzalloc(sizeof(struct gpio_buttons_dev) + -+ sizeof(struct gpio_button_data) * pdata->nbuttons, -+ GFP_KERNEL); -+ if (!bdev) { -+ printk(KERN_ERR DRV_NAME "no memory for device\n"); -+ return -ENOMEM; ++ for (size = AR71XX_MEM_SIZE_MIN; size < AR71XX_MEM_SIZE_MAX; ++ size <<= 1) { ++ if (!memcmp(ar71xx_detect_mem_size, ++ ar71xx_detect_mem_size + size, 1024)) ++ break; + } + -+ bdev->data = (struct gpio_button_data *) &bdev[1]; ++ add_memory_region(0, size, BOOT_MEM_RAM); ++} + -+ poll_dev = input_allocate_polled_device(); -+ if (!poll_dev) { -+ printk(KERN_ERR DRV_NAME "no memory for polled device\n"); -+ error = -ENOMEM; -+ goto err_free_bdev; -+ } ++static void __init ar71xx_detect_sys_type(void) ++{ ++ char *chip = "????"; ++ u32 id; ++ u32 major; ++ u32 minor; ++ u32 rev = 0; ++ ++ id = ar71xx_reset_rr(AR71XX_RESET_REG_REV_ID); ++ major = id & REV_ID_MAJOR_MASK; ++ ++ switch (major) { ++ case REV_ID_MAJOR_AR71XX: ++ minor = id & AR71XX_REV_ID_MINOR_MASK; ++ rev = id >> AR71XX_REV_ID_REVISION_SHIFT; ++ rev &= AR71XX_REV_ID_REVISION_MASK; ++ switch (minor) { ++ case AR71XX_REV_ID_MINOR_AR7130: ++ ar71xx_soc = AR71XX_SOC_AR7130; ++ chip = "7130"; ++ break; ++ ++ case AR71XX_REV_ID_MINOR_AR7141: ++ ar71xx_soc = AR71XX_SOC_AR7141; ++ chip = "7141"; ++ break; + -+ poll_dev->private = bdev; -+ poll_dev->poll = gpio_buttons_poll; -+ poll_dev->poll_interval = pdata->poll_interval; ++ case AR71XX_REV_ID_MINOR_AR7161: ++ ar71xx_soc = AR71XX_SOC_AR7161; ++ chip = "7161"; ++ break; ++ } ++ break; + -+ input = poll_dev->input; ++ case REV_ID_MAJOR_AR7240: ++ ar71xx_soc = AR71XX_SOC_AR7240; ++ chip = "7240"; ++ rev = id & AR724X_REV_ID_REVISION_MASK; ++ break; + -+ input->evbit[0] = BIT(EV_KEY); -+ input->name = pdev->name; -+ input->phys = "gpio-buttons/input0"; -+ input->dev.parent = &pdev->dev; ++ case REV_ID_MAJOR_AR7241: ++ ar71xx_soc = AR71XX_SOC_AR7241; ++ chip = "7241"; ++ rev = id & AR724X_REV_ID_REVISION_MASK; ++ break; + -+ input->id.bustype = BUS_HOST; -+ input->id.vendor = 0x0001; -+ input->id.product = 0x0001; -+ input->id.version = 0x0100; ++ case REV_ID_MAJOR_AR7242: ++ ar71xx_soc = AR71XX_SOC_AR7242; ++ chip = "7242"; ++ rev = id & AR724X_REV_ID_REVISION_MASK; ++ break; + -+ for (i = 0; i < pdata->nbuttons; i++) { -+ struct gpio_button *button = &pdata->buttons[i]; -+ unsigned int gpio = button->gpio; -+ unsigned int type = button->type ?: EV_KEY; ++ case REV_ID_MAJOR_AR913X: ++ minor = id & AR91XX_REV_ID_MINOR_MASK; ++ rev = id >> AR91XX_REV_ID_REVISION_SHIFT; ++ rev &= AR91XX_REV_ID_REVISION_MASK; ++ switch (minor) { ++ case AR91XX_REV_ID_MINOR_AR9130: ++ ar71xx_soc = AR71XX_SOC_AR9130; ++ chip = "9130"; ++ break; + -+ error = gpio_request(gpio, button->desc ? -+ button->desc : DRV_NAME); -+ if (error) { -+ printk(KERN_ERR PFX "unable to claim gpio %u, " -+ "error %d\n", gpio, error); -+ goto err_free_gpio; ++ case AR91XX_REV_ID_MINOR_AR9132: ++ ar71xx_soc = AR71XX_SOC_AR9132; ++ chip = "9132"; ++ break; + } ++ break; + -+ error = gpio_direction_input(gpio); -+ if (error) { -+ printk(KERN_ERR PFX "unable to set direction on " -+ "gpio %u, error %d\n", gpio, error); -+ goto err_free_gpio; -+ } ++ case REV_ID_MAJOR_AR9330: ++ ar71xx_soc = AR71XX_SOC_AR9330; ++ chip = "9330"; ++ rev = id & AR933X_REV_ID_REVISION_MASK; ++ break; + -+ input_set_capability(input, type, button->code); -+ bdev->data[i].last_state = gpio_get_value(button->gpio) ? 1 : 0; -+ } ++ case REV_ID_MAJOR_AR9331: ++ ar71xx_soc = AR71XX_SOC_AR9331; ++ chip = "9331"; ++ rev = id & AR933X_REV_ID_REVISION_MASK; ++ break; ++ ++ case REV_ID_MAJOR_AR9342: ++ ar71xx_soc = AR71XX_SOC_AR9342; ++ chip = "9342"; ++ rev = id & AR934X_REV_ID_REVISION_MASK; ++ break; + -+ bdev->poll_dev = poll_dev; -+ bdev->pdata = pdata; -+ platform_set_drvdata(pdev, bdev); ++ case REV_ID_MAJOR_AR9344: ++ ar71xx_soc = AR71XX_SOC_AR9344; ++ chip = "9344"; ++ rev = id & AR934X_REV_ID_REVISION_MASK; ++ break; + -+ error = input_register_polled_device(poll_dev); -+ if (error) { -+ printk(KERN_ERR PFX "unable to register polled device, " -+ "error %d\n", error); -+ goto err_free_gpio; ++ default: ++ panic("ar71xx: unknown chip id:0x%08x\n", id); + } + -+ return 0; ++ ar71xx_soc_rev = rev; + -+err_free_gpio: -+ for (i = i - 1; i >= 0; i--) -+ gpio_free(pdata->buttons[i].gpio); ++ sprintf(ar71xx_sys_type, "Atheros AR%s rev %u", chip, rev); ++ pr_info("SoC: %s\n", ar71xx_sys_type); ++} + -+ input_free_polled_device(poll_dev); ++static void __init ar934x_detect_sys_frequency(void) ++{ ++ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv; + -+err_free_bdev: -+ kfree(bdev); ++ if (ar71xx_reset_rr(AR934X_RESET_REG_BOOTSTRAP) & AR934X_REF_CLK_40) ++ ar71xx_ref_freq = 40 * 1000 * 1000; ++ else ++ ar71xx_ref_freq = 25 * 1000 * 1000; ++ ++ clk_ctrl = ar71xx_pll_rr(AR934X_PLL_REG_DDR_CTRL_CLOCK); ++ ++ pll = ar71xx_pll_rr(AR934X_PLL_REG_CPU_CONFIG); ++ out_div = AR934X_CPU_PLL_CFG_OUTDIV_GET(pll); ++ ref_div = AR934X_CPU_PLL_CFG_REFDIV_GET(pll); ++ nint = AR934X_CPU_PLL_CFG_NINT_GET(pll); ++ frac = AR934X_CPU_PLL_CFG_NFRAC_GET(pll); ++ postdiv = AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_GET(clk_ctrl); ++ ar71xx_cpu_freq = ((nint * ar71xx_ref_freq / ref_div) >> out_div) / ++ (postdiv + 1); ++ ++ out_div = AR934X_DDR_PLL_CFG_OUTDIV_GET(pll); ++ ref_div = AR934X_DDR_PLL_CFG_REFDIV_GET(pll); ++ nint = AR934X_DDR_PLL_CFG_NINT_GET(pll); ++ frac = AR934X_DDR_PLL_CFG_NFRAC_GET(pll); ++ postdiv = AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_GET(clk_ctrl); ++ ar71xx_ddr_freq = ((nint * ar71xx_ref_freq / ref_div) >> out_div) / ++ (postdiv + 1); ++ ++ postdiv = AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_GET(clk_ctrl); ++ ++ if (AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_GET(clk_ctrl)) { ++ ar71xx_ahb_freq = ar71xx_ddr_freq / (postdiv + 1); ++ } else { ++ ar71xx_ahb_freq = ar71xx_cpu_freq / (postdiv + 1); ++ } + -+ platform_set_drvdata(pdev, NULL); -+ return error; +} + -+static int __devexit gpio_buttons_remove(struct platform_device *pdev) ++static void __init ar91xx_detect_sys_frequency(void) +{ -+ struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev); -+ struct gpio_buttons_platform_data *pdata = bdev->pdata; -+ int i; -+ -+ input_unregister_polled_device(bdev->poll_dev); ++ u32 pll; ++ u32 freq; ++ u32 div; + -+ for (i = 0; i < pdata->nbuttons; i++) -+ gpio_free(pdata->buttons[i].gpio); ++ ar71xx_ref_freq = 5 * 1000 * 1000; + -+ input_free_polled_device(bdev->poll_dev); ++ pll = ar71xx_pll_rr(AR91XX_PLL_REG_CPU_CONFIG); + -+ kfree(bdev); -+ platform_set_drvdata(pdev, NULL); ++ div = ((pll >> AR91XX_PLL_DIV_SHIFT) & AR91XX_PLL_DIV_MASK); ++ freq = div * ar71xx_ref_freq; + -+ return 0; -+} ++ ar71xx_cpu_freq = freq; + -+static struct platform_driver gpio_buttons_driver = { -+ .probe = gpio_buttons_probe, -+ .remove = __devexit_p(gpio_buttons_remove), -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; ++ div = ((pll >> AR91XX_DDR_DIV_SHIFT) & AR91XX_DDR_DIV_MASK) + 1; ++ ar71xx_ddr_freq = freq / div; + -+static int __init gpio_buttons_init(void) -+{ -+ printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n"); -+ return platform_driver_register(&gpio_buttons_driver); ++ div = (((pll >> AR91XX_AHB_DIV_SHIFT) & AR91XX_AHB_DIV_MASK) + 1) * 2; ++ ar71xx_ahb_freq = ar71xx_cpu_freq / div; +} + -+static void __exit gpio_buttons_exit(void) ++static void __init ar71xx_detect_sys_frequency(void) +{ -+ platform_driver_unregister(&gpio_buttons_driver); -+} -+ -+module_init(gpio_buttons_init); -+module_exit(gpio_buttons_exit); ++ u32 pll; ++ u32 freq; ++ u32 div; + -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_VERSION(DRV_VERSION); -+MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs"); ++ ar71xx_ref_freq = 40 * 1000 * 1000; + -diff -Nur linux-2.6.39.orig/drivers/leds/leds-rb750.c linux-2.6.39/drivers/leds/leds-rb750.c ---- linux-2.6.39.orig/drivers/leds/leds-rb750.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/leds/leds-rb750.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,140 @@ -+/* -+ * LED driver for the RouterBOARD 750 -+ * -+ * Copyright (C) 2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+#include -+#include -+#include -+#include ++ pll = ar71xx_pll_rr(AR71XX_PLL_REG_CPU_CONFIG); + -+#include ++ div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1; ++ freq = div * ar71xx_ref_freq; + -+#define DRV_NAME "leds-rb750" ++ div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1; ++ ar71xx_cpu_freq = freq / div; + -+struct rb750_led_dev { -+ struct led_classdev cdev; -+ u32 mask; -+ int active_low; -+}; -+ -+struct rb750_led_drvdata { -+ struct rb750_led_dev *led_devs; -+ int num_leds; -+}; ++ div = ((pll >> AR71XX_DDR_DIV_SHIFT) & AR71XX_DDR_DIV_MASK) + 1; ++ ar71xx_ddr_freq = freq / div; + -+static inline struct rb750_led_dev *to_rbled(struct led_classdev *led_cdev) -+{ -+ return (struct rb750_led_dev *)container_of(led_cdev, -+ struct rb750_led_dev, cdev); ++ div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2; ++ ar71xx_ahb_freq = ar71xx_cpu_freq / div; +} + -+static void rb750_led_brightness_set(struct led_classdev *led_cdev, -+ enum led_brightness value) ++static void __init ar724x_detect_sys_frequency(void) +{ -+ struct rb750_led_dev *rbled = to_rbled(led_cdev); -+ int level; ++ u32 pll; ++ u32 freq; ++ u32 div; + -+ level = (value == LED_OFF) ? 0 : 1; -+ level ^= rbled->active_low; ++ ar71xx_ref_freq = 5 * 1000 * 1000; + -+ if (level) -+ rb750_latch_change(0, rbled->mask); -+ else -+ rb750_latch_change(rbled->mask, 0); ++ pll = ar71xx_pll_rr(AR724X_PLL_REG_CPU_CONFIG); ++ ++ div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK); ++ freq = div * ar71xx_ref_freq; ++ ++ div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK); ++ freq *= div; ++ ++ ar71xx_cpu_freq = freq; ++ ++ div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1; ++ ar71xx_ddr_freq = freq / div; ++ ++ div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2; ++ ar71xx_ahb_freq = ar71xx_cpu_freq / div; +} + -+static int __devinit rb750_led_probe(struct platform_device *pdev) ++static void __init ar933x_detect_sys_frequency(void) +{ -+ struct rb750_led_platform_data *pdata; -+ struct rb750_led_drvdata *drvdata; -+ int ret = 0; -+ int i; -+ -+ pdata = pdev->dev.platform_data; -+ if (!pdata) -+ return -EINVAL; ++ u32 clock_ctrl; ++ u32 cpu_config; ++ u32 freq; ++ u32 t; + -+ drvdata = kzalloc(sizeof(struct rb750_led_drvdata) + -+ sizeof(struct rb750_led_dev) * pdata->num_leds, -+ GFP_KERNEL); -+ if (!drvdata) -+ return -ENOMEM; ++ t = ar71xx_reset_rr(AR933X_RESET_REG_BOOTSTRAP); ++ if (t & AR933X_BOOTSTRAP_REF_CLK_40) ++ ar71xx_ref_freq = (40 * 1000 * 1000); ++ else ++ ar71xx_ref_freq = (25 * 1000 * 1000); + -+ drvdata->num_leds = pdata->num_leds; -+ drvdata->led_devs = (struct rb750_led_dev *) &drvdata[1]; ++ clock_ctrl = ar71xx_pll_rr(AR933X_PLL_CLOCK_CTRL_REG); ++ if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) { ++ ar71xx_cpu_freq = ar71xx_ref_freq; ++ ar71xx_ahb_freq = ar71xx_ref_freq; ++ ar71xx_ddr_freq = ar71xx_ref_freq; ++ } else { ++ cpu_config = ar71xx_pll_rr(AR933X_PLL_CPU_CONFIG_REG); + -+ for (i = 0; i < drvdata->num_leds; i++) { -+ struct rb750_led_dev *rbled = &drvdata->led_devs[i]; -+ struct rb750_led_data *led_data = &pdata->leds[i]; ++ t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) & ++ AR933X_PLL_CPU_CONFIG_REFDIV_MASK; ++ freq = ar71xx_ref_freq / t; + -+ rbled->cdev.name = led_data->name; -+ rbled->cdev.default_trigger = led_data->default_trigger; -+ rbled->cdev.brightness_set = rb750_led_brightness_set; -+ rbled->cdev.brightness = LED_OFF; ++ t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) & ++ AR933X_PLL_CPU_CONFIG_NINT_MASK; ++ freq *= t; + -+ rbled->mask = led_data->mask; -+ rbled->active_low = !!led_data->active_low; ++ t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & ++ AR933X_PLL_CPU_CONFIG_OUTDIV_MASK; ++ if (t == 0) ++ t = 1; + -+ ret = led_classdev_register(&pdev->dev, &rbled->cdev); -+ if (ret) -+ goto err; -+ } ++ freq >>= t; + -+ platform_set_drvdata(pdev, drvdata); -+ return 0; ++ t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) & ++ AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1; ++ ar71xx_cpu_freq = freq / t; + -+ err: -+ for (i = i - 1; i >= 0; i--) -+ led_classdev_unregister(&drvdata->led_devs[i].cdev); ++ t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) & ++ AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1; ++ ar71xx_ddr_freq = freq / t; + -+ kfree(drvdata); -+ return ret; ++ t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) & ++ AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1; ++ ar71xx_ahb_freq = freq / t; ++ } +} + -+static int __devexit rb750_led_remove(struct platform_device *pdev) ++static void __init detect_sys_frequency(void) +{ -+ struct rb750_led_drvdata *drvdata; -+ int i; ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ ar71xx_detect_sys_frequency(); ++ break; + -+ drvdata = platform_get_drvdata(pdev); -+ for (i = 0; i < drvdata->num_leds; i++) -+ led_classdev_unregister(&drvdata->led_devs[i].cdev); ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ ar724x_detect_sys_frequency(); ++ break; + -+ kfree(drvdata); -+ return 0; -+} ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ ar91xx_detect_sys_frequency(); ++ break; + -+static struct platform_driver rb750_led_driver = { -+ .probe = rb750_led_probe, -+ .remove = __devexit_p(rb750_led_remove), -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ ar933x_detect_sys_frequency(); ++ break; + -+MODULE_ALIAS("platform:leds-rb750"); ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ ar934x_detect_sys_frequency(); ++ break; ++ default: ++ BUG(); ++ } ++} + -+static int __init rb750_led_init(void) ++const char *get_system_type(void) +{ -+ return platform_driver_register(&rb750_led_driver); ++ return ar71xx_sys_type; +} + -+static void __exit rb750_led_exit(void) ++unsigned int __cpuinit get_c0_compare_irq(void) +{ -+ platform_driver_unregister(&rb750_led_driver); ++ return CP0_LEGACY_COMPARE_IRQ; +} + -+module_init(rb750_led_init); -+module_exit(rb750_led_exit); ++void __init plat_mem_setup(void) ++{ ++ set_io_port_base(KSEG1); + -+MODULE_DESCRIPTION(DRV_NAME); -+MODULE_DESCRIPTION("LED driver for the RouterBOARD 750"); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_LICENSE("GPL v2"); -diff -Nur linux-2.6.39.orig/drivers/leds/leds-wndr3700-usb.c linux-2.6.39/drivers/leds/leds-wndr3700-usb.c ---- linux-2.6.39.orig/drivers/leds/leds-wndr3700-usb.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/leds/leds-wndr3700-usb.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,75 @@ -+/* -+ * USB LED driver for the NETGEAR WNDR3700 -+ * -+ * Copyright (C) 2009 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ ar71xx_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE, ++ AR71XX_DDR_CTRL_SIZE); + -+#include -+#include -+#include ++ ar71xx_pll_base = ioremap_nocache(AR71XX_PLL_BASE, ++ AR71XX_PLL_SIZE); + -+#include ++ ar71xx_reset_base = ioremap_nocache(AR71XX_RESET_BASE, ++ AR71XX_RESET_SIZE); + -+#define DRIVER_NAME "wndr3700-led-usb" ++ ar71xx_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE); + -+static void wndr3700_usb_led_set(struct led_classdev *cdev, -+ enum led_brightness brightness) -+{ -+ if (brightness) -+ ar71xx_device_start(RESET_MODULE_GE1_PHY); -+ else -+ ar71xx_device_stop(RESET_MODULE_GE1_PHY); ++ ar71xx_usb_ctrl_base = ioremap_nocache(AR71XX_USB_CTRL_BASE, ++ AR71XX_USB_CTRL_SIZE); ++ ++ ar71xx_detect_mem_size(); ++ ar71xx_detect_sys_type(); ++ detect_sys_frequency(); ++ ++ pr_info("Clocks: CPU:%u.%03uMHz, DDR:%u.%03uMHz, AHB:%u.%03uMHz, " ++ "Ref:%u.%03uMHz", ++ ar71xx_cpu_freq / 1000000, (ar71xx_cpu_freq / 1000) % 1000, ++ ar71xx_ddr_freq / 1000000, (ar71xx_ddr_freq / 1000) % 1000, ++ ar71xx_ahb_freq / 1000000, (ar71xx_ahb_freq / 1000) % 1000, ++ ar71xx_ref_freq / 1000000, (ar71xx_ref_freq / 1000) % 1000); ++ ++ _machine_restart = ar71xx_restart; ++ _machine_halt = ar71xx_halt; ++ pm_power_off = ar71xx_halt; +} + -+static enum led_brightness wndr3700_usb_led_get(struct led_classdev *cdev) ++void __init plat_time_init(void) +{ -+ return ar71xx_device_stopped(RESET_MODULE_GE1_PHY) ? LED_OFF : LED_FULL; ++ mips_hpt_frequency = ar71xx_cpu_freq / 2; +} + -+static struct led_classdev wndr3700_usb_led = { -+ .name = "wndr3700:green:usb", -+ .brightness_set = wndr3700_usb_led_set, -+ .brightness_get = wndr3700_usb_led_get, -+}; ++__setup("board=", mips_machtype_setup); + -+static int __devinit wndr3700_usb_led_probe(struct platform_device *pdev) ++static int __init ar71xx_machine_setup(void) +{ -+ return led_classdev_register(&pdev->dev, &wndr3700_usb_led); -+} ++ ar71xx_gpio_init(); + -+static int __devexit wndr3700_usb_led_remove(struct platform_device *pdev) -+{ -+ led_classdev_unregister(&wndr3700_usb_led); ++ ar71xx_add_device_uart(); ++ ar71xx_add_device_wdt(); ++ ++ mips_machine_setup(); + return 0; +} + -+static struct platform_driver wndr3700_usb_led_driver = { -+ .probe = wndr3700_usb_led_probe, -+ .remove = __devexit_p(wndr3700_usb_led_remove), -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; ++arch_initcall(ar71xx_machine_setup); + -+static int __init wndr3700_usb_led_init(void) ++static void __init ar71xx_generic_init(void) +{ -+ return platform_driver_register(&wndr3700_usb_led_driver); ++ /* Nothing to do */ +} + -+static void __exit wndr3700_usb_led_exit(void) ++MIPS_MACHINE(AR71XX_MACH_GENERIC, "Generic", "Generic AR71xx board", ++ ar71xx_generic_init); +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/checksum.h linux-2.6.39/arch/mips/include/asm/checksum.h +--- linux-2.6.39.orig/arch/mips/include/asm/checksum.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/include/asm/checksum.h 2011-08-24 05:53:21.109231561 +0200 +@@ -12,6 +12,7 @@ + #define _ASM_CHECKSUM_H + + #include ++#include + + #include + +@@ -104,26 +105,30 @@ + const unsigned int *stop = word + ihl; + unsigned int csum; + int carry; ++ unsigned int w; + +- csum = word[0]; +- csum += word[1]; +- carry = (csum < word[1]); ++ csum = __get_unaligned_cpu32(word++); ++ ++ w = __get_unaligned_cpu32(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[2]; +- carry = (csum < word[2]); ++ w = __get_unaligned_cpu32(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- csum += word[3]; +- carry = (csum < word[3]); ++ w = __get_unaligned_cpu32(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; + +- word += 4; + do { +- csum += *word; +- carry = (csum < *word); ++ w = __get_unaligned_cpu32(word++); ++ csum += w; ++ carry = (csum < w); + csum += carry; +- word++; + } while (word != stop); + + return csum_fold(csum); +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/fw/myloader/myloader.h linux-2.6.39/arch/mips/include/asm/fw/myloader/myloader.h +--- linux-2.6.39.orig/arch/mips/include/asm/fw/myloader/myloader.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/fw/myloader/myloader.h 2011-04-27 12:19:21.887662064 +0200 +@@ -0,0 +1,34 @@ ++/* ++ * Compex's MyLoader specific definitions ++ * ++ * Copyright (C) 2006-2008 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ ++ ++#ifndef _ASM_MIPS_FW_MYLOADER_H ++#define _ASM_MIPS_FW_MYLOADER_H ++ ++#include ++ ++struct myloader_info { ++ uint32_t vid; ++ uint32_t did; ++ uint32_t svid; ++ uint32_t sdid; ++ uint8_t macs[MYLO_ETHADDR_COUNT][6]; ++}; ++ ++#ifdef CONFIG_MYLOADER ++extern struct myloader_info *myloader_get_info(void) __init; ++#else ++static inline struct myloader_info *myloader_get_info(void) +{ -+ platform_driver_unregister(&wndr3700_usb_led_driver); ++ return NULL; +} ++#endif /* CONFIG_MYLOADER */ + -+module_init(wndr3700_usb_led_init); -+module_exit(wndr3700_usb_led_exit); -+ -+MODULE_DESCRIPTION("USB LED driver for the NETGEAR WNDR3700"); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:" DRIVER_NAME); -diff -Nur linux-2.6.39.orig/drivers/mtd/maps/Kconfig linux-2.6.39/drivers/mtd/maps/Kconfig ---- linux-2.6.39.orig/drivers/mtd/maps/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/mtd/maps/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -260,6 +260,13 @@ - Support for parsing CFE image tag and creating MTD partitions on - Broadcom BCM63xx boards. - -+config MTD_AR91XX_FLASH -+ tristate "Atheros AR91xx parallel flash support" -+ depends on ATHEROS_AR71XX -+ select MTD_COMPLEX_MAPPINGS -+ help -+ Parallel flash driver for the Atheros AR91xx based boards. -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN -diff -Nur linux-2.6.39.orig/drivers/mtd/maps/Makefile linux-2.6.39/drivers/mtd/maps/Makefile ---- linux-2.6.39.orig/drivers/mtd/maps/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/mtd/maps/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -7,6 +7,7 @@ - endif - - # Chip mappings -+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o - obj-$(CONFIG_MTD_CDB89712) += cdb89712.o - obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o - obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o -diff -Nur linux-2.6.39.orig/drivers/mtd/maps/ar91xx_flash.c linux-2.6.39/drivers/mtd/maps/ar91xx_flash.c ---- linux-2.6.39.orig/drivers/mtd/maps/ar91xx_flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/mtd/maps/ar91xx_flash.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,310 @@ ++#endif /* _ASM_MIPS_FW_MYLOADER_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h 2011-08-06 09:32:36.758018150 +0200 +@@ -0,0 +1,769 @@ +/* -+ * Parallel flash driver for the Atheros AR91xx SoC ++ * Atheros AR71xx SoC specific definitions + * -+ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. ++ * Parts of this file are based on Atheros 2.6.15 BSP ++ * Parts of this file are based on Atheros 2.6.31 BSP + * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. + */ + -+#include ++#ifndef __ASM_MACH_AR71XX_H ++#define __ASM_MACH_AR71XX_H ++ +#include -+#include +#include -+#include -+#include -+#include -+#include -+#include -+#include +#include ++#include + -+#include -+#include -+ -+#define DRV_NAME "ar91xx-flash" -+ -+struct ar91xx_flash_info { -+ struct mtd_info *mtd; -+ struct map_info map; -+#ifdef CONFIG_MTD_PARTITIONS -+ int nr_parts; -+ struct mtd_partition *parts; -+#endif -+}; ++#ifndef __ASSEMBLER__ + -+static map_word ar91xx_flash_read(struct map_info *map, unsigned long ofs) -+{ -+ map_word val; ++#define AR71XX_PCI_MEM_BASE 0x10000000 ++#define AR71XX_PCI_MEM_SIZE 0x08000000 ++#define AR71XX_APB_BASE 0x18000000 ++#define AR71XX_GE0_BASE 0x19000000 ++#define AR71XX_GE0_SIZE 0x01000000 ++#define AR71XX_GE1_BASE 0x1a000000 ++#define AR71XX_GE1_SIZE 0x01000000 ++#define AR71XX_EHCI_BASE 0x1b000000 ++#define AR71XX_EHCI_SIZE 0x01000000 ++#define AR71XX_OHCI_BASE 0x1c000000 ++#define AR71XX_OHCI_SIZE 0x01000000 ++#define AR7240_OHCI_BASE 0x1b000000 ++#define AR7240_OHCI_SIZE 0x01000000 ++#define AR71XX_SPI_BASE 0x1f000000 ++#define AR71XX_SPI_SIZE 0x01000000 + -+ if (map_bankwidth_is_1(map)) -+ val.x[0] = __raw_readb(map->virt + (ofs ^ 3)); -+ else if (map_bankwidth_is_2(map)) -+ val.x[0] = __raw_readw(map->virt + (ofs ^ 2)); -+ else -+ val = map_word_ff(map); ++#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000) ++#define AR71XX_DDR_CTRL_SIZE 0x10000 ++#define AR71XX_CPU_BASE (AR71XX_APB_BASE + 0x00010000) ++#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) ++#define AR71XX_UART_SIZE 0x10000 ++#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) ++#define AR71XX_USB_CTRL_SIZE 0x10000 ++#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) ++#define AR71XX_GPIO_SIZE 0x10000 ++#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) ++#define AR71XX_PLL_SIZE 0x10000 ++#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) ++#define AR71XX_RESET_SIZE 0x10000 ++#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000) ++#define AR71XX_MII_SIZE 0x10000 ++#define AR71XX_SLIC_BASE (AR71XX_APB_BASE + 0x00090000) ++#define AR71XX_SLIC_SIZE 0x10000 ++#define AR71XX_DMA_BASE (AR71XX_APB_BASE + 0x000A0000) ++#define AR71XX_DMA_SIZE 0x10000 ++#define AR71XX_STEREO_BASE (AR71XX_APB_BASE + 0x000B0000) ++#define AR71XX_STEREO_SIZE 0x10000 + -+ return val; -+} ++#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000C0000) ++#define AR724X_PCI_CRP_SIZE 0x100 + -+static void ar91xx_flash_write(struct map_info *map, map_word d, -+ unsigned long ofs) -+{ -+ if (map_bankwidth_is_1(map)) -+ __raw_writeb(d.x[0], map->virt + (ofs ^ 3)); -+ else if (map_bankwidth_is_2(map)) -+ __raw_writew(d.x[0], map->virt + (ofs ^ 2)); ++#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000F0000) ++#define AR724X_PCI_CTRL_SIZE 0x100 + -+ mb(); -+} ++#define AR91XX_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) ++#define AR91XX_WMAC_SIZE 0x30000 + -+static map_word ar91xx_flash_read_lock(struct map_info *map, unsigned long ofs) -+{ -+ map_word ret; ++#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) ++#define AR933X_UART_SIZE 0x14 ++#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) ++#define AR933X_WMAC_SIZE 0x20000 + -+ ar71xx_flash_acquire(); -+ ret = ar91xx_flash_read(map, ofs); -+ ar71xx_flash_release(); ++#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) ++#define AR934X_WMAC_SIZE 0x20000 + -+ return ret; -+} ++#define AR71XX_MEM_SIZE_MIN 0x0200000 ++#define AR71XX_MEM_SIZE_MAX 0x10000000 + -+static void ar91xx_flash_write_lock(struct map_info *map, map_word d, -+ unsigned long ofs) -+{ -+ ar71xx_flash_acquire(); -+ ar91xx_flash_write(map, d, ofs); -+ ar71xx_flash_release(); -+} ++#define AR71XX_CPU_IRQ_BASE 0 ++#define AR71XX_MISC_IRQ_BASE 8 ++#define AR71XX_MISC_IRQ_COUNT 32 ++#define AR71XX_GPIO_IRQ_BASE 40 ++#define AR71XX_GPIO_IRQ_COUNT 32 ++#define AR71XX_PCI_IRQ_BASE 72 ++#define AR71XX_PCI_IRQ_COUNT 8 + -+static void ar91xx_flash_copy_from_lock(struct map_info *map, void *to, -+ unsigned long from, ssize_t len) -+{ -+ ar71xx_flash_acquire(); -+ inline_map_copy_from(map, to, from, len); -+ ar71xx_flash_release(); -+} ++#define AR71XX_CPU_IRQ_IP2 (AR71XX_CPU_IRQ_BASE + 2) ++#define AR71XX_CPU_IRQ_USB (AR71XX_CPU_IRQ_BASE + 3) ++#define AR71XX_CPU_IRQ_GE0 (AR71XX_CPU_IRQ_BASE + 4) ++#define AR71XX_CPU_IRQ_GE1 (AR71XX_CPU_IRQ_BASE + 5) ++#define AR71XX_CPU_IRQ_MISC (AR71XX_CPU_IRQ_BASE + 6) ++#define AR71XX_CPU_IRQ_TIMER (AR71XX_CPU_IRQ_BASE + 7) + -+static void ar91xx_flash_copy_to_lock(struct map_info *map, unsigned long to, -+ const void *from, ssize_t len) -+{ -+ ar71xx_flash_acquire(); -+ inline_map_copy_to(map, to, from, len); -+ ar71xx_flash_release(); -+} ++#define AR71XX_MISC_IRQ_TIMER (AR71XX_MISC_IRQ_BASE + 0) ++#define AR71XX_MISC_IRQ_ERROR (AR71XX_MISC_IRQ_BASE + 1) ++#define AR71XX_MISC_IRQ_GPIO (AR71XX_MISC_IRQ_BASE + 2) ++#define AR71XX_MISC_IRQ_UART (AR71XX_MISC_IRQ_BASE + 3) ++#define AR71XX_MISC_IRQ_WDOG (AR71XX_MISC_IRQ_BASE + 4) ++#define AR71XX_MISC_IRQ_PERFC (AR71XX_MISC_IRQ_BASE + 5) ++#define AR71XX_MISC_IRQ_OHCI (AR71XX_MISC_IRQ_BASE + 6) ++#define AR71XX_MISC_IRQ_DMA (AR71XX_MISC_IRQ_BASE + 7) ++#define AR71XX_MISC_IRQ_TIMER2 (AR71XX_MISC_IRQ_BASE + 8) ++#define AR71XX_MISC_IRQ_TIMER3 (AR71XX_MISC_IRQ_BASE + 9) ++#define AR71XX_MISC_IRQ_TIMER4 (AR71XX_MISC_IRQ_BASE + 10) ++#define AR71XX_MISC_IRQ_DDR_PERF (AR71XX_MISC_IRQ_BASE + 11) ++#define AR71XX_MISC_IRQ_ENET_LINK (AR71XX_MISC_IRQ_BASE + 12) + -+static int ar91xx_flash_remove(struct platform_device *pdev) -+{ -+ struct ar91xx_flash_platform_data *pdata; -+ struct ar91xx_flash_info *info; ++#define AR71XX_GPIO_IRQ(_x) (AR71XX_GPIO_IRQ_BASE + (_x)) + -+ info = platform_get_drvdata(pdev); -+ if (info == NULL) -+ return 0; ++#define AR71XX_PCI_IRQ_DEV0 (AR71XX_PCI_IRQ_BASE + 0) ++#define AR71XX_PCI_IRQ_DEV1 (AR71XX_PCI_IRQ_BASE + 1) ++#define AR71XX_PCI_IRQ_DEV2 (AR71XX_PCI_IRQ_BASE + 2) ++#define AR71XX_PCI_IRQ_CORE (AR71XX_PCI_IRQ_BASE + 4) + -+ platform_set_drvdata(pdev, NULL); ++extern u32 ar71xx_ahb_freq; ++extern u32 ar71xx_cpu_freq; ++extern u32 ar71xx_ddr_freq; ++extern u32 ar71xx_ref_freq; + -+ if (info->mtd == NULL) -+ return 0; ++enum ar71xx_soc_type { ++ AR71XX_SOC_UNKNOWN, ++ AR71XX_SOC_AR7130, ++ AR71XX_SOC_AR7141, ++ AR71XX_SOC_AR7161, ++ AR71XX_SOC_AR7240, ++ AR71XX_SOC_AR7241, ++ AR71XX_SOC_AR7242, ++ AR71XX_SOC_AR9130, ++ AR71XX_SOC_AR9132, ++ AR71XX_SOC_AR9330, ++ AR71XX_SOC_AR9331, ++ AR71XX_SOC_AR9341, ++ AR71XX_SOC_AR9342, ++ AR71XX_SOC_AR9344, ++}; ++extern u32 ar71xx_soc_rev; + -+ pdata = pdev->dev.platform_data; -+#ifdef CONFIG_MTD_PARTITIONS -+ if (info->nr_parts) { -+ del_mtd_partitions(info->mtd); -+ kfree(info->parts); -+ } else if (pdata->nr_parts) { -+ del_mtd_partitions(info->mtd); -+ } else { -+ del_mtd_device(info->mtd); -+ } -+#else -+ del_mtd_device(info->mtd); -+#endif -+ map_destroy(info->mtd); ++extern enum ar71xx_soc_type ar71xx_soc; + -+ return 0; -+} ++/* ++ * PLL block ++ */ ++#define AR71XX_PLL_REG_CPU_CONFIG 0x00 ++#define AR71XX_PLL_REG_SEC_CONFIG 0x04 ++#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10 ++#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14 + -+static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; -+#ifdef CONFIG_MTD_PARTITIONS -+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+#endif ++#define AR71XX_PLL_DIV_SHIFT 3 ++#define AR71XX_PLL_DIV_MASK 0x1f ++#define AR71XX_CPU_DIV_SHIFT 16 ++#define AR71XX_CPU_DIV_MASK 0x3 ++#define AR71XX_DDR_DIV_SHIFT 18 ++#define AR71XX_DDR_DIV_MASK 0x3 ++#define AR71XX_AHB_DIV_SHIFT 20 ++#define AR71XX_AHB_DIV_MASK 0x7 + -+static int ar91xx_flash_probe(struct platform_device *pdev) -+{ -+ struct ar91xx_flash_platform_data *pdata; -+ struct ar91xx_flash_info *info; -+ struct resource *res; -+ struct resource *region; -+ const char **probe_type; -+ int err = 0; ++#define AR71XX_ETH0_PLL_SHIFT 17 ++#define AR71XX_ETH1_PLL_SHIFT 19 + -+ pdata = pdev->dev.platform_data; -+ if (pdata == NULL) -+ return -EINVAL; ++#define AR724X_PLL_REG_CPU_CONFIG 0x00 ++#define AR724X_PLL_REG_PCIE_CONFIG 0x18 + -+ info = devm_kzalloc(&pdev->dev, sizeof(struct ar91xx_flash_info), -+ GFP_KERNEL); -+ if (info == NULL) { -+ err = -ENOMEM; -+ goto err_out; -+ } ++#define AR724X_PLL_DIV_SHIFT 0 ++#define AR724X_PLL_DIV_MASK 0x3ff ++#define AR724X_PLL_REF_DIV_SHIFT 10 ++#define AR724X_PLL_REF_DIV_MASK 0xf ++#define AR724X_AHB_DIV_SHIFT 19 ++#define AR724X_AHB_DIV_MASK 0x1 ++#define AR724X_DDR_DIV_SHIFT 22 ++#define AR724X_DDR_DIV_MASK 0x3 + -+ platform_set_drvdata(pdev, info); ++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c + -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (res == NULL) { -+ err = -ENOENT; -+ goto err_out; -+ } ++#define AR91XX_PLL_REG_CPU_CONFIG 0x00 ++#define AR91XX_PLL_REG_ETH_CONFIG 0x04 ++#define AR91XX_PLL_REG_ETH0_INT_CLOCK 0x14 ++#define AR91XX_PLL_REG_ETH1_INT_CLOCK 0x18 + -+ dev_info(&pdev->dev, "%.8llx at %.8llx\n", -+ (unsigned long long)(res->end - res->start + 1), -+ (unsigned long long)res->start); ++#define AR91XX_PLL_DIV_SHIFT 0 ++#define AR91XX_PLL_DIV_MASK 0x3ff ++#define AR91XX_DDR_DIV_SHIFT 22 ++#define AR91XX_DDR_DIV_MASK 0x3 ++#define AR91XX_AHB_DIV_SHIFT 19 ++#define AR91XX_AHB_DIV_MASK 0x1 + -+ region = devm_request_mem_region(&pdev->dev, -+ res->start, res->end - res->start + 1, -+ dev_name(&pdev->dev)); -+ if (region == NULL) { -+ dev_err(&pdev->dev, "could not reserve memory region\n"); -+ err = -ENOMEM; -+ goto err_out; -+ } ++#define AR91XX_ETH0_PLL_SHIFT 20 ++#define AR91XX_ETH1_PLL_SHIFT 22 + -+ info->map.name = dev_name(&pdev->dev); -+ info->map.phys = res->start; -+ info->map.size = res->end - res->start + 1; -+ info->map.bankwidth = pdata->width; ++#define AR933X_PLL_CPU_CONFIG_REG 0x00 ++#define AR933X_PLL_CLOCK_CTRL_REG 0x08 + -+ info->map.virt = devm_ioremap(&pdev->dev, info->map.phys, -+ info->map.size); -+ if (info->map.virt == NULL) { -+ dev_err(&pdev->dev, "failed to ioremap flash region\n"); -+ err = -EIO; -+ goto err_out; -+ } ++#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 ++#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f ++#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 ++#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f ++#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 ++#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 + -+ simple_map_init(&info->map); -+ if (pdata->is_shared) { -+ info->map.read = ar91xx_flash_read_lock; -+ info->map.write = ar91xx_flash_write_lock; -+ info->map.copy_from = ar91xx_flash_copy_from_lock; -+ info->map.copy_to = ar91xx_flash_copy_to_lock; -+ } else { -+ info->map.read = ar91xx_flash_read; -+ info->map.write = ar91xx_flash_write; -+ } ++#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) ++#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 ++#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 ++#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 ++#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 ++#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 ++#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 + -+ probe_type = rom_probe_types; -+ for (; info->mtd == NULL && *probe_type != NULL; probe_type++) -+ info->mtd = do_map_probe(*probe_type, &info->map); ++#define AR934X_PLL_REG_CPU_CONFIG 0x00 ++#define AR934X_PLL_REG_DDR_CTRL_CLOCK 0x8 + -+ if (info->mtd == NULL) { -+ dev_err(&pdev->dev, "map_probe failed\n"); -+ err = -ENXIO; -+ goto err_out; -+ } ++#define AR934X_CPU_PLL_CFG_OUTDIV_MSB 21 ++#define AR934X_CPU_PLL_CFG_OUTDIV_LSB 19 ++#define AR934X_CPU_PLL_CFG_OUTDIV_MASK 0x00380000 + -+ info->mtd->owner = THIS_MODULE; ++#define AR934X_CPU_PLL_CFG_OUTDIV_GET(x) \ ++ (((x) & AR934X_CPU_PLL_CFG_OUTDIV_MASK) >> \ ++ AR934X_CPU_PLL_CFG_OUTDIV_LSB) + -+#ifdef CONFIG_MTD_PARTITIONS -+ if (pdata->nr_parts) { -+ dev_info(&pdev->dev, "using static partition mapping\n"); -+ add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts); -+ return 0; -+ } ++#define AR934X_DDR_PLL_CFG_OUTDIV_MSB 25 ++#define AR934X_DDR_PLL_CFG_OUTDIV_LSB 23 ++#define AR934X_DDR_PLL_CFG_OUTDIV_MASK 0x03800000 + -+ err = parse_mtd_partitions(info->mtd, part_probe_types, -+ &info->parts, 0); -+ if (err > 0) { -+ add_mtd_partitions(info->mtd, info->parts, err); -+ return 0; -+ } -+#endif ++#define AR934X_DDR_PLL_CFG_OUTDIV_GET(x) \ ++ (((x) & AR934X_DDR_PLL_CFG_OUTDIV_MASK) >> \ ++ AR934X_DDR_PLL_CFG_OUTDIV_LSB) + -+ add_mtd_device(info->mtd); -+ return 0; ++#define AR934X_DDR_PLL_CFG_OUTDIV_SET(x) \ ++ (((x) << AR934X_DDR_PLL_CFG_OUTDIV_LSB) & \ ++ AR934X_DDR_PLL_CFG_OUTDIV_MASK) + -+ err_out: -+ ar91xx_flash_remove(pdev); -+ return err; -+} ++#define AR934X_CPU_PLL_CFG_REFDIV_MSB 16 ++#define AR934X_CPU_PLL_CFG_REFDIV_LSB 12 ++#define AR934X_CPU_PLL_CFG_REFDIV_MASK 0x0001f000 + -+#ifdef CONFIG_PM -+static int ar91xx_flash_suspend(struct platform_device *dev, pm_message_t state) -+{ -+ struct ar91xx_flash_info *info = platform_get_drvdata(dev); -+ int ret = 0; ++#define AR934X_CPU_PLL_CFG_REFDIV_GET(x) \ ++ (((x) & AR934X_CPU_PLL_CFG_REFDIV_MASK) >> \ ++ AR934X_CPU_PLL_CFG_REFDIV_LSB) + -+ if (info->mtd->suspend) -+ ret = info->mtd->suspend(info->mtd); ++#define AR934X_CPU_PLL_CFG_REFDIV_SET(x) \ ++ (((x) << AR934X_CPU_PLL_CFG_REFDIV_LSB) & \ ++ AR934X_CPU_PLL_CFG_REFDIV_MASK) + -+ if (ret) -+ goto fail; ++#define AR934X_CPU_PLL_CFG_REFDIV_RESET 2 + -+ return 0; ++#define AR934X_CPU_PLL_CFG_NINT_MSB 11 ++#define AR934X_CPU_PLL_CFG_NINT_LSB 6 ++#define AR934X_CPU_PLL_CFG_NINT_MASK 0x00000fc0 + -+ fail: -+ if (info->mtd->suspend) { -+ BUG_ON(!info->mtd->resume); -+ info->mtd->resume(info->mtd); -+ } ++#define AR934X_CPU_PLL_CFG_NINT_GET(x) \ ++ (((x) & AR934X_CPU_PLL_CFG_NINT_MASK) >> \ ++ AR934X_CPU_PLL_CFG_NINT_LSB) + -+ return ret; -+} ++#define AR934X_CPU_PLL_CFG_NINT_SET(x) \ ++ (((x) << AR934X_CPU_PLL_CFG_NINT_LSB) & \ ++ AR934X_CPU_PLL_CFG_NINT_MASK) + -+static int ar91xx_flash_resume(struct platform_device *pdev) -+{ -+ struct ar91xx_flash_info *info = platform_get_drvdata(pdev); ++#define AR934X_CPU_PLL_CFG_NINT_RESET 20 + -+ if (info->mtd->resume) -+ info->mtd->resume(info->mtd); ++#define AR934X_CPU_PLL_CFG_NFRAC_MSB 5 ++#define AR934X_CPU_PLL_CFG_NFRAC_LSB 0 ++#define AR934X_CPU_PLL_CFG_NFRAC_MASK 0x0000003f + -+ return 0; -+} ++#define AR934X_CPU_PLL_CFG_NFRAC_GET(x) \ ++ (((x) & AR934X_CPU_PLL_CFG_NFRAC_MASK) >> \ ++ AR934X_CPU_PLL_CFG_NFRAC_LSB) + -+static void ar91xx_flash_shutdown(struct platform_device *pdev) -+{ -+ struct ar91xx_flash_info *info = platform_get_drvdata(pdev); ++#define AR934X_CPU_PLL_CFG_NFRAC_SET(x) \ ++ (((x) << AR934X_CPU_PLL_CFG_NFRAC_LSB) & \ ++ AR934X_CPU_PLL_CFG_NFRAC_MASK) + -+ if (info->mtd->suspend && info->mtd->resume) -+ if (info->mtd->suspend(info->mtd) == 0) -+ info->mtd->resume(info->mtd); -+} -+#else -+#define ar91xx_flash_suspend NULL -+#define ar91xx_flash_resume NULL -+#define ar91xx_flash_shutdown NULL -+#endif ++#define AR934X_DDR_PLL_CFG_REFDIV_MSB 20 ++#define AR934X_DDR_PLL_CFG_REFDIV_LSB 16 ++#define AR934X_DDR_PLL_CFG_REFDIV_MASK 0x001f0000 + -+static struct platform_driver ar91xx_flash_driver = { -+ .probe = ar91xx_flash_probe, -+ .remove = ar91xx_flash_remove, -+ .suspend = ar91xx_flash_suspend, -+ .resume = ar91xx_flash_resume, -+ .shutdown = ar91xx_flash_shutdown, -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; ++#define AR934X_DDR_PLL_CFG_REFDIV_GET(x) \ ++ (((x) & AR934X_DDR_PLL_CFG_REFDIV_MASK) >> \ ++ AR934X_DDR_PLL_CFG_REFDIV_LSB) + -+static int __init ar91xx_flash_init(void) -+{ -+ return platform_driver_register(&ar91xx_flash_driver); -+} ++#define AR934X_DDR_PLL_CFG_REFDIV_SET(x) \ ++ (((x) << AR934X_DDR_PLL_CFG_REFDIV_LSB) & \ ++ AR934X_DDR_PLL_CFG_REFDIV_MASK) + -+static void __exit ar91xx_flash_exit(void) -+{ -+ platform_driver_unregister(&ar91xx_flash_driver); -+} ++#define AR934X_DDR_PLL_CFG_REFDIV_RESET 2 + -+module_init(ar91xx_flash_init); -+module_exit(ar91xx_flash_exit); ++#define AR934X_DDR_PLL_CFG_NINT_MSB 15 ++#define AR934X_DDR_PLL_CFG_NINT_LSB 10 ++#define AR934X_DDR_PLL_CFG_NINT_MASK 0x0000fc00 + -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_DESCRIPTION("Parallel flash driver for the Atheros AR91xx SoC"); -+MODULE_ALIAS("platform:" DRV_NAME); -diff -Nur linux-2.6.39.orig/drivers/mtd/nand/Kconfig linux-2.6.39/drivers/mtd/nand/Kconfig ---- linux-2.6.39.orig/drivers/mtd/nand/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/mtd/nand/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -531,4 +531,8 @@ - Enables support for NAND Flash chips on the ST Microelectronics - Flexible Static Memory Controller (FSMC) - -+config MTD_NAND_RB4XX -+ tristate "NAND flash driver for RouterBoard 4xx series" -+ depends on MTD_NAND && AR71XX_MACH_RB4XX ++#define AR934X_DDR_PLL_CFG_NINT_GET(x) \ ++ (((x) & AR934X_DDR_PLL_CFG_NINT_MASK) >> \ ++ AR934X_DDR_PLL_CFG_NINT_LSB) + - endif # MTD_NAND -diff -Nur linux-2.6.39.orig/drivers/mtd/nand/Makefile linux-2.6.39/drivers/mtd/nand/Makefile ---- linux-2.6.39.orig/drivers/mtd/nand/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/mtd/nand/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -34,6 +34,7 @@ - obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o - obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o - obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o -+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o - obj-$(CONFIG_MTD_ALAUDA) += alauda.o - obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o - obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o -diff -Nur linux-2.6.39.orig/drivers/mtd/nand/rb4xx_nand.c linux-2.6.39/drivers/mtd/nand/rb4xx_nand.c ---- linux-2.6.39.orig/drivers/mtd/nand/rb4xx_nand.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/mtd/nand/rb4xx_nand.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,513 @@ -+/* -+ * NAND flash driver for the MikroTik RouterBoard 4xx series -+ * -+ * Copyright (C) 2008 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This file was based on the driver for Linux 2.6.22 published by -+ * MikroTik for their RouterBoard 4xx series devices. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++#define AR934X_DDR_PLL_CFG_NINT_SET(x) \ ++ (((x) << AR934X_DDR_PLL_CFG_NINT_LSB) & \ ++ AR934X_DDR_PLL_CFG_NINT_MASK) + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++#define AR934X_DDR_PLL_CFG_NINT_RESET 20 + -+#include ++#define AR934X_DDR_PLL_CFG_NFRAC_MSB 9 ++#define AR934X_DDR_PLL_CFG_NFRAC_LSB 0 ++#define AR934X_DDR_PLL_CFG_NFRAC_MASK 0x000003ff + -+#define DRV_NAME "rb4xx-nand" -+#define DRV_VERSION "0.1.10" -+#define DRV_DESC "NAND flash driver for RouterBoard 4xx series" ++#define AR934X_DDR_PLL_CFG_NFRAC_GET(x) \ ++ (((x) & AR934X_DDR_PLL_CFG_NFRAC_MASK) >> \ ++ AR934X_DDR_PLL_CFG_NFRAC_LSB) + -+#define USE_FAST_READ 1 -+#define USE_FAST_WRITE 1 -+#undef RB4XX_NAND_DEBUG ++#define AR934X_DDR_PLL_CFG_NFRAC_SET(x) \ ++ (((x) << AR934X_DDR_PLL_CFG_NFRAC_LSB) & \ ++ AR934X_DDR_PLL_CFG_NFRAC_MASK) + -+#ifdef RB4XX_NAND_DEBUG -+#define DBG(fmt, arg...) printk(KERN_DEBUG DRV_NAME ": " fmt, ## arg) -+#else -+#define DBG(fmt, arg...) do {} while (0) -+#endif ++#define AR934X_DDR_PLL_CFG_NFRAC_RESET 512 + -+#define RB4XX_NAND_GPIO_RDY 5 -+#define RB4XX_FLASH_HZ 33333334 -+#define RB4XX_NAND_HZ 33333334 ++#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MSB 19 ++#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_LSB 15 ++#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x000f8000 + -+#define SPI_CTRL_FASTEST 0x40 -+#define SPI_CTRL_SAFE 0x43 /* 25 MHz for AHB 200 MHz */ -+#define SBIT_IOC_BASE SPI_IOC_CS1 -+#define SBIT_IOC_DO_SHIFT 0 -+#define SBIT_IOC_DO (1u << SBIT_IOC_DO_SHIFT) -+#define SBIT_IOC_DO2_SHIFT 18 -+#define SBIT_IOC_DO2 (1u << SBIT_IOC_DO2_SHIFT) -+ -+#define CPLD_CMD_WRITE_MULT 0x08 /* send cmd, n x send data, read data */ -+#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */ -+#define CPLD_CMD_READ_MULT 0x0a /* send cmd, send idle, n x read data */ -+#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */ -+ -+#define CFG_BIT_nCE 0x80 -+#define CFG_BIT_CLE 0x40 -+#define CFG_BIT_ALE 0x20 -+#define CFG_BIT_FAN 0x10 -+#define CFG_BIT_nLED4 0x08 -+#define CFG_BIT_nLED3 0x04 -+#define CFG_BIT_nLED2 0x02 -+#define CFG_BIT_nLED1 0x01 -+ -+#define CFG_BIT_nLEDS \ -+ (CFG_BIT_nLED1 | CFG_BIT_nLED2 | CFG_BIT_nLED3 | CFG_BIT_nLED4) ++#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_GET(x) \ ++ (((x) & AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK) >> \ ++ AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_LSB) + -+struct rb4xx_nand_info { -+ struct nand_chip chip; -+ struct mtd_info mtd; -+}; ++#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SET(x) \ ++ (((x) << AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_LSB) & \ ++ AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK) + -+/* -+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader -+ * will not be able to find the kernel that we load. -+ */ -+static struct nand_ecclayout rb4xx_nand_ecclayout = { -+ .eccbytes = 6, -+ .eccpos = { 8, 9, 10, 13, 14, 15 }, -+ .oobavail = 9, -+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -+}; ++#define AR934X_CPU_DDR_CLK_CTRL_AHB_POST_DIV_RESET 0 + -+static struct mtd_partition rb4xx_nand_partitions[] = { -+ { -+ .name = "booter", -+ .offset = 0, -+ .size = (256 * 1024), -+ .mask_flags = MTD_WRITEABLE, -+ }, -+ { -+ .name = "kernel", -+ .offset = (256 * 1024), -+ .size = (4 * 1024 * 1024) - (256 * 1024), -+ }, -+ { -+ .name = "rootfs", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = (1024*1024*64) - (1024*256) - (4 * 1024 * 1024) -+ }, -+ { -+ .name = "cfgfs", -+ .offset = (1024*1024*64) - (1024*256), -+ .size = (1024*256), -+ }, -+}; ++#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MSB 14 ++#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_LSB 10 ++#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x00007c00 + -+#if USE_FAST_READ -+#define SPI_NDATA_BASE 0x00800000 -+static unsigned spi_ctrl_fread = SPI_CTRL_SAFE; -+static unsigned spi_ctrl_flash = SPI_CTRL_SAFE; -+extern unsigned mips_hpt_frequency; -+#endif ++#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_GET(x) \ ++ (((x) & AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK) >> \ ++ AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_LSB) + -+static inline unsigned rb4xx_spi_rreg(unsigned r) -+{ -+ return __raw_readl((void * __iomem)(KSEG1ADDR(AR71XX_SPI_BASE) + r)); -+} ++#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SET(x) \ ++ (((x) << AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_LSB) & \ ++ AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK) + -+static inline void rb4xx_spi_wreg(unsigned r, unsigned v) -+{ -+ __raw_writel(v, (void * __iomem)(KSEG1ADDR(AR71XX_SPI_BASE) + r)); -+} ++#define AR934X_CPU_DDR_CLK_CTRL_DDR_POST_DIV_RESET 0 + -+static inline void do_spi_clk(int bit) -+{ -+ unsigned bval = SBIT_IOC_BASE | (bit & 1); ++#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MSB 9 ++#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_LSB 5 ++#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x000003e0 + -+ rb4xx_spi_wreg(SPI_REG_IOC, bval); -+ rb4xx_spi_wreg(SPI_REG_IOC, bval | SPI_IOC_CLK); -+} ++#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_GET(x) \ ++ (((x) & AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK) >> \ ++ AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_LSB) + -+static void do_spi_byte(uint8_t byte) -+{ -+ do_spi_clk(byte >> 7); -+ do_spi_clk(byte >> 6); -+ do_spi_clk(byte >> 5); -+ do_spi_clk(byte >> 4); -+ do_spi_clk(byte >> 3); -+ do_spi_clk(byte >> 2); -+ do_spi_clk(byte >> 1); -+ do_spi_clk(byte); ++#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SET(x) \ ++ (((x) << AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_LSB) & \ ++ AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK) + -+ DBG("spi_byte sent 0x%02x got 0x%x\n", -+ byte, rb4xx_spi_rreg(SPI_REG_RDS)); -+} ++#define AR934X_CPU_DDR_CLK_CTRL_CPU_POST_DIV_RESET 0 + -+#if USE_FAST_WRITE -+static inline void do_spi_clk_fast(int bit1, int bit2) -+{ -+ unsigned bval = (SBIT_IOC_BASE | -+ ((bit1 << SBIT_IOC_DO_SHIFT) & SBIT_IOC_DO) | -+ ((bit2 << SBIT_IOC_DO2_SHIFT) & SBIT_IOC_DO2)); ++#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MSB 24 ++#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_LSB 24 ++#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MASK 0x01000000 + -+ rb4xx_spi_wreg(SPI_REG_IOC, bval); -+ rb4xx_spi_wreg(SPI_REG_IOC, bval | SPI_IOC_CLK); -+} ++#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_GET(x) \ ++ (((x) & AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MASK) >> \ ++ AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_LSB) + -+static inline void do_spi_byte_fast(uint8_t byte) -+{ -+ do_spi_clk_fast(byte >> 7, byte >> 6); -+ do_spi_clk_fast(byte >> 5, byte >> 4); -+ do_spi_clk_fast(byte >> 3, byte >> 2); -+ do_spi_clk_fast(byte >> 1, byte >> 0); ++#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_SET(x) \ ++ (((x) << AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_LSB) & \ ++ AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_MASK) + -+ DBG("spi_byte_fast sent 0x%02x got 0x%x\n", -+ byte, rb4xx_spi_rreg(SPI_REG_RDS)); -+} -+#else -+static inline void do_spi_byte_fast(uint8_t byte) ++#define AR934X_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL_RESET 1 ++ ++extern void __iomem *ar71xx_pll_base; ++ ++static inline void ar71xx_pll_wr(unsigned reg, u32 val) +{ -+ do_spi_byte(byte); ++ __raw_writel(val, ar71xx_pll_base + reg); +} -+#endif /* USE_FAST_WRITE */ + -+static int do_spi_cmd(unsigned cmd, unsigned sendCnt, const uint8_t *sendData, -+ unsigned recvCnt, uint8_t *recvData, -+ const uint8_t *verifyData, int fastWrite) ++static inline u32 ar71xx_pll_rr(unsigned reg) +{ -+ unsigned i; -+ -+ DBG("SPI cmd 0x%x send %u recv %u\n", cmd, sendCnt, recvCnt); -+ -+ rb4xx_spi_wreg(SPI_REG_FS, SPI_FS_GPIO); -+ rb4xx_spi_wreg(SPI_REG_CTRL, SPI_CTRL_FASTEST); ++ return __raw_readl(ar71xx_pll_base + reg); ++} + -+ do_spi_byte(cmd); -+#if 0 -+ if (cmd == CPLD_CMD_READ_FAST) { -+ do_spi_byte(0x80); -+ do_spi_byte(0); -+ do_spi_byte(0); -+ } -+#endif -+ for (i = 0; i < sendCnt; ++i) { -+ if (fastWrite) -+ do_spi_byte_fast(sendData[i]); -+ else -+ do_spi_byte(sendData[i]); -+ } -+ -+ for (i = 0; i < recvCnt; ++i) { -+ if (fastWrite) -+ do_spi_byte_fast(0); -+ else -+ do_spi_byte(0); -+ -+ if (recvData) { -+ recvData[i] = rb4xx_spi_rreg(SPI_REG_RDS) & 0xff; -+ } else if (verifyData) { -+ if (verifyData[i] != (rb4xx_spi_rreg(SPI_REG_RDS) -+ & 0xff)) -+ break; -+ } -+ } -+ -+ rb4xx_spi_wreg(SPI_REG_IOC, SBIT_IOC_BASE | SPI_IOC_CS0); -+ rb4xx_spi_wreg(SPI_REG_CTRL, spi_ctrl_flash); -+ rb4xx_spi_wreg(SPI_REG_FS, 0); -+ -+ return i == recvCnt; -+} ++/* ++ * USB_CONFIG block ++ */ ++#define USB_CTRL_REG_FLADJ 0x00 ++#define USB_CTRL_REG_CONFIG 0x04 + -+static int got_write = 1; ++extern void __iomem *ar71xx_usb_ctrl_base; + -+static void rb4xx_nand_write_data(const uint8_t *byte, unsigned cnt) ++static inline void ar71xx_usb_ctrl_wr(unsigned reg, u32 val) +{ -+ do_spi_cmd(CPLD_CMD_WRITE_MULT, cnt, byte, 1, NULL, NULL, 1); -+ got_write = 1; ++ __raw_writel(val, ar71xx_usb_ctrl_base + reg); +} + -+static void rb4xx_nand_write_byte(uint8_t byte) ++static inline u32 ar71xx_usb_ctrl_rr(unsigned reg) +{ -+ rb4xx_nand_write_data(&byte, 1); ++ return __raw_readl(ar71xx_usb_ctrl_base + reg); +} + -+#if USE_FAST_READ -+static uint8_t *rb4xx_nand_read_getaddr(unsigned cnt) -+{ -+ static unsigned nboffset = 0x100000; -+ unsigned addr; ++/* ++ * GPIO block ++ */ ++#define GPIO_REG_OE 0x00 ++#define GPIO_REG_IN 0x04 ++#define GPIO_REG_OUT 0x08 ++#define GPIO_REG_SET 0x0c ++#define GPIO_REG_CLEAR 0x10 ++#define GPIO_REG_INT_MODE 0x14 ++#define GPIO_REG_INT_TYPE 0x18 ++#define GPIO_REG_INT_POLARITY 0x1c ++#define GPIO_REG_INT_PENDING 0x20 ++#define GPIO_REG_INT_ENABLE 0x24 ++#define GPIO_REG_FUNC 0x28 + -+ if (got_write) { -+ nboffset = (nboffset + 31) & ~31; -+ if (nboffset >= 0x100000) /* 1MB */ -+ nboffset = 0; ++#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17) ++#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16) ++#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13) ++#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12) ++#define AR71XX_GPIO_FUNC_UART_EN BIT(8) ++#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4) ++#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0) + -+ got_write = 0; -+ rb4xx_spi_wreg(SPI_REG_FS, SPI_FS_GPIO); -+ rb4xx_spi_wreg(SPI_REG_CTRL, spi_ctrl_fread); -+ rb4xx_spi_wreg(SPI_REG_FS, 0); -+ } ++#define AR71XX_GPIO_COUNT 16 + -+ addr = KSEG1ADDR(AR71XX_SPI_BASE + SPI_NDATA_BASE) + nboffset; -+ DBG("rb4xx_nand_read_getaddr 0x%x cnt 0x%x\n", addr, cnt); ++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19) ++#define AR724X_GPIO_FUNC_SPI_EN BIT(18) ++#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14) ++#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13) ++#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12) ++#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11) ++#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10) ++#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9) ++#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4) ++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3) ++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2) ++#define AR724X_GPIO_FUNC_UART_EN BIT(1) ++#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0) + -+ nboffset += cnt; -+ return (uint8_t *)addr; -+} ++#define AR724X_GPIO_COUNT 18 + -+static void rb4xx_nand_read_data(uint8_t *buf, unsigned cnt) -+{ -+ unsigned size32 = cnt & ~31; -+ unsigned remain = cnt & 31; ++#define AR91XX_GPIO_FUNC_WMAC_LED_EN BIT(22) ++#define AR91XX_GPIO_FUNC_EXP_PORT_CS_EN BIT(21) ++#define AR91XX_GPIO_FUNC_I2S_REFCLKEN BIT(20) ++#define AR91XX_GPIO_FUNC_I2S_MCKEN BIT(19) ++#define AR91XX_GPIO_FUNC_I2S1_EN BIT(18) ++#define AR91XX_GPIO_FUNC_I2S0_EN BIT(17) ++#define AR91XX_GPIO_FUNC_SLIC_EN BIT(16) ++#define AR91XX_GPIO_FUNC_UART_RTSCTS_EN BIT(9) ++#define AR91XX_GPIO_FUNC_UART_EN BIT(8) ++#define AR91XX_GPIO_FUNC_USB_CLK_EN BIT(4) + -+ if (size32) { -+ uint8_t *addr = rb4xx_nand_read_getaddr(size32); -+ memcpy(buf, (void *)addr, size32); -+ } ++#define AR91XX_GPIO_COUNT 22 + -+ if (remain) { -+ do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, remain, -+ buf + size32, NULL, 0); -+ } -+} ++#define AR933X_GPIO_COUNT 30 + -+static int rb4xx_nand_verify_data(const uint8_t *buf, unsigned cnt) -+{ -+ unsigned size32 = cnt & ~31; -+ unsigned remain = cnt & 31; ++#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14) ++#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13) + -+ if (size32) { -+ uint8_t *addr = rb4xx_nand_read_getaddr(size32); -+ if (memcmp(buf, (void *)addr, size32) != 0) -+ return 0; -+ } ++#define AR934X_GPIO_COUNT 32 ++#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17) + -+ if (remain) { -+ return do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, remain, -+ NULL, buf + size32, 0); -+ } -+ return 1; -+} -+#else /* USE_FAST_READ */ -+static void rb4xx_nand_read_data(uint8_t *buf, unsigned cnt) -+{ -+ do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, cnt, buf, NULL, 0); -+} ++extern void __iomem *ar71xx_gpio_base; + -+static int rb4xx_nand_verify_data(const uint8_t *buf, unsigned cnt) ++static inline void ar71xx_gpio_wr(unsigned reg, u32 value) +{ -+ return do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, cnt, NULL, buf, 0); ++ __raw_writel(value, ar71xx_gpio_base + reg); +} -+#endif /* USE_FAST_READ */ + -+static void rb4xx_nand_write_cfg(uint8_t byte) ++static inline u32 ar71xx_gpio_rr(unsigned reg) +{ -+ do_spi_cmd(CPLD_CMD_WRITE_CFG, 1, &byte, 0, NULL, NULL, 0); -+ got_write = 1; ++ return __raw_readl(ar71xx_gpio_base + reg); +} + -+static int rb4xx_nand_dev_ready(struct mtd_info *mtd) -+{ -+ return gpio_get_value(RB4XX_NAND_GPIO_RDY); -+} ++void ar71xx_gpio_init(void) __init; ++void ar71xx_gpio_function_enable(u32 mask); ++void ar71xx_gpio_function_disable(u32 mask); ++void ar71xx_gpio_function_setup(u32 set, u32 clear); + -+static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, -+ unsigned int ctrl) -+{ -+ if (ctrl & NAND_CTRL_CHANGE) { -+ uint8_t cfg = CFG_BIT_nLEDS; ++/* ++ * DDR_CTRL block ++ */ ++#define AR71XX_DDR_REG_PCI_WIN0 0x7c ++#define AR71XX_DDR_REG_PCI_WIN1 0x80 ++#define AR71XX_DDR_REG_PCI_WIN2 0x84 ++#define AR71XX_DDR_REG_PCI_WIN3 0x88 ++#define AR71XX_DDR_REG_PCI_WIN4 0x8c ++#define AR71XX_DDR_REG_PCI_WIN5 0x90 ++#define AR71XX_DDR_REG_PCI_WIN6 0x94 ++#define AR71XX_DDR_REG_PCI_WIN7 0x98 ++#define AR71XX_DDR_REG_FLUSH_GE0 0x9c ++#define AR71XX_DDR_REG_FLUSH_GE1 0xa0 ++#define AR71XX_DDR_REG_FLUSH_USB 0xa4 ++#define AR71XX_DDR_REG_FLUSH_PCI 0xa8 + -+ cfg |= (ctrl & NAND_CLE) ? CFG_BIT_CLE : 0; -+ cfg |= (ctrl & NAND_ALE) ? CFG_BIT_ALE : 0; -+ cfg |= (ctrl & NAND_NCE) ? 0 : CFG_BIT_nCE; ++#define AR724X_DDR_REG_FLUSH_GE0 0x7c ++#define AR724X_DDR_REG_FLUSH_GE1 0x80 ++#define AR724X_DDR_REG_FLUSH_USB 0x84 ++#define AR724X_DDR_REG_FLUSH_PCIE 0x88 + -+ rb4xx_nand_write_cfg(cfg); -+ } ++#define AR91XX_DDR_REG_FLUSH_GE0 0x7c ++#define AR91XX_DDR_REG_FLUSH_GE1 0x80 ++#define AR91XX_DDR_REG_FLUSH_USB 0x84 ++#define AR91XX_DDR_REG_FLUSH_WMAC 0x88 + -+ if (cmd != NAND_CMD_NONE) -+ rb4xx_nand_write_byte(cmd); -+} ++#define AR933X_DDR_REG_FLUSH_GE0 0x7c ++#define AR933X_DDR_REG_FLUSH_GE1 0x80 ++#define AR933X_DDR_REG_FLUSH_USB 0x84 ++#define AR933X_DDR_REG_FLUSH_WMAC 0x88 + -+static uint8_t rb4xx_nand_read_byte(struct mtd_info *mtd) -+{ -+ uint8_t byte = 0; ++#define AR934X_DDR_REG_FLUSH_GE0 0x9c ++#define AR934X_DDR_REG_FLUSH_GE1 0xa0 ++#define AR934X_DDR_REG_FLUSH_USB 0xa4 ++#define AR934X_DDR_REG_FLUSH_PCIE 0xa8 + -+ rb4xx_nand_read_data(&byte, 1); -+ return byte; -+} + -+static void rb4xx_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, -+ int len) -+{ -+ rb4xx_nand_write_data(buf, len); -+} ++#define PCI_WIN0_OFFS 0x10000000 ++#define PCI_WIN1_OFFS 0x11000000 ++#define PCI_WIN2_OFFS 0x12000000 ++#define PCI_WIN3_OFFS 0x13000000 ++#define PCI_WIN4_OFFS 0x14000000 ++#define PCI_WIN5_OFFS 0x15000000 ++#define PCI_WIN6_OFFS 0x16000000 ++#define PCI_WIN7_OFFS 0x07000000 + -+static void rb4xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, -+ int len) ++extern void __iomem *ar71xx_ddr_base; ++ ++static inline void ar71xx_ddr_wr(unsigned reg, u32 val) +{ -+ rb4xx_nand_read_data(buf, len); ++ __raw_writel(val, ar71xx_ddr_base + reg); +} + -+static int rb4xx_nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, -+ int len) ++static inline u32 ar71xx_ddr_rr(unsigned reg) +{ -+ if (!rb4xx_nand_verify_data(buf, len)) -+ return -EFAULT; -+ -+ return 0; ++ return __raw_readl(ar71xx_ddr_base + reg); +} + -+static unsigned get_spi_ctrl(unsigned hz_max, const char *name) -+{ -+ unsigned div; ++void ar71xx_ddr_flush(u32 reg); + -+ div = (ar71xx_ahb_freq - 1) / (2 * hz_max); -+ /* -+ * CPU has a bug at (div == 0) - first bit read is random -+ */ -+ if (div == 0) -+ ++div; ++/* ++ * PCI block ++ */ ++#define AR71XX_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + PCI_WIN7_OFFS + 0x10000) ++#define AR71XX_PCI_CFG_SIZE 0x100 + -+ if (name) { -+ unsigned ahb_khz = (ar71xx_ahb_freq + 500) / 1000; -+ unsigned div_real = 2 * (div + 1); -+ printk(KERN_INFO "%s SPI clock %u kHz (AHB %u kHz / %u)\n", -+ name, -+ ahb_khz / div_real, -+ ahb_khz, div_real); -+ } ++#define PCI_REG_CRP_AD_CBE 0x00 ++#define PCI_REG_CRP_WRDATA 0x04 ++#define PCI_REG_CRP_RDDATA 0x08 ++#define PCI_REG_CFG_AD 0x0c ++#define PCI_REG_CFG_CBE 0x10 ++#define PCI_REG_CFG_WRDATA 0x14 ++#define PCI_REG_CFG_RDDATA 0x18 ++#define PCI_REG_PCI_ERR 0x1c ++#define PCI_REG_PCI_ERR_ADDR 0x20 ++#define PCI_REG_AHB_ERR 0x24 ++#define PCI_REG_AHB_ERR_ADDR 0x28 + -+ return SPI_CTRL_FASTEST + div; -+} ++#define PCI_CRP_CMD_WRITE 0x00010000 ++#define PCI_CRP_CMD_READ 0x00000000 ++#define PCI_CFG_CMD_READ 0x0000000a ++#define PCI_CFG_CMD_WRITE 0x0000000b + -+static int __init rb4xx_nand_probe(struct platform_device *pdev) -+{ -+ struct rb4xx_nand_info *info; -+ int ret; ++#define PCI_IDSEL_ADL_START 17 + -+ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); ++#define AR724X_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + 0x4000000) ++#define AR724X_PCI_CFG_SIZE 0x1000 + -+ ret = gpio_request(RB4XX_NAND_GPIO_RDY, "NAND RDY"); -+ if (ret) { -+ printk(KERN_ERR "rb4xx-nand: gpio request failed\n"); -+ return ret; -+ } ++#define AR724X_PCI_REG_APP 0x00 ++#define AR724X_PCI_REG_RESET 0x18 ++#define AR724X_PCI_REG_INT_STATUS 0x4c ++#define AR724X_PCI_REG_INT_MASK 0x50 + -+ ret = gpio_direction_input(RB4XX_NAND_GPIO_RDY); -+ if (ret) { -+ printk(KERN_ERR "rb4xx-nand: unable to set input mode " -+ "on gpio%d\n", RB4XX_NAND_GPIO_RDY); -+ goto err_free_gpio; -+ } ++#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0) ++#define AR724X_PCI_RESET_LINK_UP BIT(0) + -+ info = kzalloc(sizeof(*info), GFP_KERNEL); -+ if (!info) { -+ printk(KERN_ERR "rb4xx-nand: no memory for private data\n"); -+ ret = -ENOMEM; -+ goto err_free_gpio; -+ } ++#define AR724X_PCI_INT_DEV0 BIT(14) + -+#if USE_FAST_READ -+ spi_ctrl_fread = get_spi_ctrl(RB4XX_NAND_HZ, "NAND"); -+#endif -+ spi_ctrl_flash = get_spi_ctrl(RB4XX_FLASH_HZ, "FLASH"); ++/* ++ * RESET block ++ */ ++#define AR71XX_RESET_REG_TIMER 0x00 ++#define AR71XX_RESET_REG_TIMER_RELOAD 0x04 ++#define AR71XX_RESET_REG_WDOG_CTRL 0x08 ++#define AR71XX_RESET_REG_WDOG 0x0c ++#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10 ++#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14 ++#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18 ++#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c ++#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20 ++#define AR71XX_RESET_REG_RESET_MODULE 0x24 ++#define AR71XX_RESET_REG_PERFC_CTRL 0x2c ++#define AR71XX_RESET_REG_PERFC0 0x30 ++#define AR71XX_RESET_REG_PERFC1 0x34 ++#define AR71XX_RESET_REG_REV_ID 0x90 + -+ rb4xx_nand_write_cfg(CFG_BIT_nLEDS | CFG_BIT_nCE); ++#define AR91XX_RESET_REG_GLOBAL_INT_STATUS 0x18 ++#define AR91XX_RESET_REG_RESET_MODULE 0x1c ++#define AR91XX_RESET_REG_PERF_CTRL 0x20 ++#define AR91XX_RESET_REG_PERFC0 0x24 ++#define AR91XX_RESET_REG_PERFC1 0x28 + -+ info->chip.priv = &info; -+ info->mtd.priv = &info->chip; -+ info->mtd.owner = THIS_MODULE; ++#define AR724X_RESET_REG_RESET_MODULE 0x1c + -+ info->chip.cmd_ctrl = rb4xx_nand_cmd_ctrl; -+ info->chip.dev_ready = rb4xx_nand_dev_ready; -+ info->chip.read_byte = rb4xx_nand_read_byte; -+ info->chip.write_buf = rb4xx_nand_write_buf; -+ info->chip.read_buf = rb4xx_nand_read_buf; -+ info->chip.verify_buf = rb4xx_nand_verify_buf; ++#define AR933X_RESET_REG_RESET_MODULE 0x1c ++#define AR933X_RESET_REG_BOOTSTRAP 0xac ++#define AR933X_BOOTSTRAP_EEPBUSY BIT(4) ++#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) + -+ info->chip.chip_delay = 25; -+ info->chip.ecc.mode = NAND_ECC_SOFT; -+ info->chip.options |= NAND_NO_AUTOINCR; ++#define AR934X_RESET_REG_RESET_MODULE 0x1c ++#define AR934X_RESET_REG_BOOTSTRAP 0xb0 ++/* 0 - 25MHz 1 - 40 MHz */ ++#define AR934X_REF_CLK_40 (1 << 4) + -+ platform_set_drvdata(pdev, info); ++#define WDOG_CTRL_LAST_RESET BIT(31) ++#define WDOG_CTRL_ACTION_MASK 3 ++#define WDOG_CTRL_ACTION_NONE 0 /* no action */ ++#define WDOG_CTRL_ACTION_GPI 1 /* general purpose interrupt */ ++#define WDOG_CTRL_ACTION_NMI 2 /* NMI */ ++#define WDOG_CTRL_ACTION_FCR 3 /* full chip reset */ + -+ ret = nand_scan_ident(&info->mtd, 1, NULL); -+ if (ret) { -+ ret = -ENXIO; -+ goto err_free_info; -+ } ++#define MISC_INT_ENET_LINK BIT(12) ++#define MISC_INT_DDR_PERF BIT(11) ++#define MISC_INT_TIMER4 BIT(10) ++#define MISC_INT_TIMER3 BIT(9) ++#define MISC_INT_TIMER2 BIT(8) ++#define MISC_INT_DMA BIT(7) ++#define MISC_INT_OHCI BIT(6) ++#define MISC_INT_PERFC BIT(5) ++#define MISC_INT_WDOG BIT(4) ++#define MISC_INT_UART BIT(3) ++#define MISC_INT_GPIO BIT(2) ++#define MISC_INT_ERROR BIT(1) ++#define MISC_INT_TIMER BIT(0) + -+ if (info->mtd.writesize == 512) -+ info->chip.ecc.layout = &rb4xx_nand_ecclayout; ++#define PCI_INT_CORE BIT(4) ++#define PCI_INT_DEV2 BIT(2) ++#define PCI_INT_DEV1 BIT(1) ++#define PCI_INT_DEV0 BIT(0) + -+ ret = nand_scan_tail(&info->mtd); -+ if (ret) { -+ return -ENXIO; -+ goto err_set_drvdata; -+ } ++#define RESET_MODULE_EXTERNAL BIT(28) ++#define RESET_MODULE_FULL_CHIP BIT(24) ++#define RESET_MODULE_AMBA2WMAC BIT(22) ++#define RESET_MODULE_CPU_NMI BIT(21) ++#define RESET_MODULE_CPU_COLD BIT(20) ++#define RESET_MODULE_DMA BIT(19) ++#define RESET_MODULE_SLIC BIT(18) ++#define RESET_MODULE_STEREO BIT(17) ++#define RESET_MODULE_DDR BIT(16) ++#define RESET_MODULE_GE1_MAC BIT(13) ++#define RESET_MODULE_GE1_PHY BIT(12) ++#define RESET_MODULE_USBSUS_OVERRIDE BIT(10) ++#define RESET_MODULE_GE0_MAC BIT(9) ++#define RESET_MODULE_GE0_PHY BIT(8) ++#define RESET_MODULE_USB_OHCI_DLL BIT(6) ++#define RESET_MODULE_USB_HOST BIT(5) ++#define RESET_MODULE_USB_PHY BIT(4) ++#define RESET_MODULE_USB_OHCI_DLL_7240 BIT(3) ++#define RESET_MODULE_PCI_BUS BIT(1) ++#define RESET_MODULE_PCI_CORE BIT(0) + -+#ifdef CONFIG_MTD_PARTITIONS -+ ret = add_mtd_partitions(&info->mtd, rb4xx_nand_partitions, -+ ARRAY_SIZE(rb4xx_nand_partitions)); -+#else -+ ret = add_mtd_device(&info->mtd); -+#endif -+ if (ret) -+ goto err_release_nand; ++#define AR724X_RESET_GE1_MDIO BIT(23) ++#define AR724X_RESET_GE0_MDIO BIT(22) ++#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) ++#define AR724X_RESET_PCIE_PHY BIT(7) ++#define AR724X_RESET_PCIE BIT(6) ++#define AR724X_RESET_USB_HOST BIT(5) ++#define AR724X_RESET_USB_PHY BIT(4) ++#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) + -+ return 0; ++#define AR933X_RESET_WMAC BIT(11) ++#define AR933X_RESET_GE1_MDIO BIT(23) ++#define AR933X_RESET_GE0_MDIO BIT(22) ++#define AR933X_RESET_GE1_MAC BIT(13) ++#define AR933X_RESET_GE0_MAC BIT(9) + -+err_release_nand: -+ nand_release(&info->mtd); -+err_set_drvdata: -+ platform_set_drvdata(pdev, NULL); -+err_free_info: -+ kfree(info); -+err_free_gpio: -+ gpio_free(RB4XX_NAND_GPIO_RDY); -+ return ret; -+} ++#define REV_ID_MAJOR_MASK 0xfff0 ++#define REV_ID_MAJOR_AR71XX 0x00a0 ++#define REV_ID_MAJOR_AR913X 0x00b0 ++#define REV_ID_MAJOR_AR7240 0x00c0 ++#define REV_ID_MAJOR_AR7241 0x0100 ++#define REV_ID_MAJOR_AR7242 0x1100 ++#define REV_ID_MAJOR_AR9330 0x0110 ++#define REV_ID_MAJOR_AR9331 0x1110 ++#define REV_ID_MAJOR_AR9341 0x0120 ++#define REV_ID_MAJOR_AR9342 0x1120 ++#define REV_ID_MAJOR_AR9344 0x2120 + -+static int __devexit rb4xx_nand_remove(struct platform_device *pdev) -+{ -+ struct rb4xx_nand_info *info = platform_get_drvdata(pdev); ++#define AR71XX_REV_ID_MINOR_MASK 0x3 ++#define AR71XX_REV_ID_MINOR_AR7130 0x0 ++#define AR71XX_REV_ID_MINOR_AR7141 0x1 ++#define AR71XX_REV_ID_MINOR_AR7161 0x2 ++#define AR71XX_REV_ID_REVISION_MASK 0x3 ++#define AR71XX_REV_ID_REVISION_SHIFT 2 + -+ nand_release(&info->mtd); -+ platform_set_drvdata(pdev, NULL); -+ kfree(info); ++#define AR91XX_REV_ID_MINOR_MASK 0x3 ++#define AR91XX_REV_ID_MINOR_AR9130 0x0 ++#define AR91XX_REV_ID_MINOR_AR9132 0x1 ++#define AR91XX_REV_ID_REVISION_MASK 0x3 ++#define AR91XX_REV_ID_REVISION_SHIFT 2 + -+ return 0; -+} ++#define AR724X_REV_ID_REVISION_MASK 0x3 + -+static struct platform_driver rb4xx_nand_driver = { -+ .probe = rb4xx_nand_probe, -+ .remove = __devexit_p(rb4xx_nand_remove), -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; ++#define AR933X_REV_ID_REVISION_MASK 0xf + -+static int __init rb4xx_nand_init(void) ++#define AR934X_REV_ID_REVISION_MASK 0xf ++ ++extern void __iomem *ar71xx_reset_base; ++ ++static inline void ar71xx_reset_wr(unsigned reg, u32 val) +{ -+ return platform_driver_register(&rb4xx_nand_driver); ++ __raw_writel(val, ar71xx_reset_base + reg); +} + -+static void __exit rb4xx_nand_exit(void) ++static inline u32 ar71xx_reset_rr(unsigned reg) +{ -+ platform_driver_unregister(&rb4xx_nand_driver); ++ return __raw_readl(ar71xx_reset_base + reg); +} + -+module_init(rb4xx_nand_init); -+module_exit(rb4xx_nand_exit); ++void ar71xx_device_stop(u32 mask); ++void ar71xx_device_start(u32 mask); ++int ar71xx_device_stopped(u32 mask); + -+MODULE_DESCRIPTION(DRV_DESC); -+MODULE_VERSION(DRV_VERSION); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_AUTHOR("Imre Kaloz "); -+MODULE_LICENSE("GPL v2"); -diff -Nur linux-2.6.39.orig/drivers/mtd/nand/rb750_nand.c linux-2.6.39/drivers/mtd/nand/rb750_nand.c ---- linux-2.6.39.orig/drivers/mtd/nand/rb750_nand.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/mtd/nand/rb750_nand.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,360 @@ +/* -+ * NAND flash driver for the MikroTik RouterBOARD 750 ++ * SPI block ++ */ ++#define SPI_REG_FS 0x00 /* Function Select */ ++#define SPI_REG_CTRL 0x04 /* SPI Control */ ++#define SPI_REG_IOC 0x08 /* SPI I/O Control */ ++#define SPI_REG_RDS 0x0c /* Read Data Shift */ ++ ++#define SPI_FS_GPIO BIT(0) /* Enable GPIO mode */ ++ ++#define SPI_CTRL_RD BIT(6) /* Remap Disable */ ++#define SPI_CTRL_DIV_MASK 0x3f ++ ++#define SPI_IOC_DO BIT(0) /* Data Out pin */ ++#define SPI_IOC_CLK BIT(8) /* CLK pin */ ++#define SPI_IOC_CS(n) BIT(16 + (n)) ++#define SPI_IOC_CS0 SPI_IOC_CS(0) ++#define SPI_IOC_CS1 SPI_IOC_CS(1) ++#define SPI_IOC_CS2 SPI_IOC_CS(2) ++#define SPI_IOC_CS_ALL (SPI_IOC_CS0 | SPI_IOC_CS1 | SPI_IOC_CS2) ++ ++void ar71xx_flash_acquire(void); ++void ar71xx_flash_release(void); ++ ++/* ++ * MII_CTRL block ++ */ ++#define MII_REG_MII0_CTRL 0x00 ++#define MII_REG_MII1_CTRL 0x04 ++ ++#define MII0_CTRL_IF_GMII 0 ++#define MII0_CTRL_IF_MII 1 ++#define MII0_CTRL_IF_RGMII 2 ++#define MII0_CTRL_IF_RMII 3 ++ ++#define MII1_CTRL_IF_RGMII 0 ++#define MII1_CTRL_IF_RMII 1 ++ ++#endif /* __ASSEMBLER__ */ ++ ++#endif /* __ASM_MACH_AR71XX_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h 2011-04-27 12:19:21.867661560 +0200 +@@ -0,0 +1,26 @@ ++/* ++ * AR91xx parallel flash driver platform data definitions + * -+ * Copyright (C) 2010 Gabor Juhos ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include -+#include -+#include -+#include -+#include -+#include ++#ifndef __AR91XX_FLASH_H ++#define __AR91XX_FLASH_H + -+#include -+#include ++struct mtd_partition; + -+#define DRV_NAME "rb750-nand" -+#define DRV_VERSION "0.1.0" -+#define DRV_DESC "NAND flash driver for the RouterBOARD 750" ++struct ar91xx_flash_platform_data { ++ unsigned int width; ++ u8 is_shared:1; ++#ifdef CONFIG_MTD_PARTITIONS ++ unsigned int nr_parts; ++ struct mtd_partition *parts; ++#endif ++}; + -+#define RB750_NAND_IO0 BIT(RB750_GPIO_NAND_IO0) -+#define RB750_NAND_ALE BIT(RB750_GPIO_NAND_ALE) -+#define RB750_NAND_CLE BIT(RB750_GPIO_NAND_CLE) -+#define RB750_NAND_NRE BIT(RB750_GPIO_NAND_NRE) -+#define RB750_NAND_NWE BIT(RB750_GPIO_NAND_NWE) -+#define RB750_NAND_RDY BIT(RB750_GPIO_NAND_RDY) -+#define RB750_NAND_NCE BIT(RB750_GPIO_NAND_NCE) ++#endif /* __AR91XX_FLASH_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h 2011-08-06 09:32:36.758018150 +0200 +@@ -0,0 +1,67 @@ ++/* ++ * Atheros AR933X UART defines ++ * ++ * Copyright (C) 2011 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+#define RB750_NAND_DATA_SHIFT 1 -+#define RB750_NAND_DATA_BITS (0xff << RB750_NAND_DATA_SHIFT) -+#define RB750_NAND_INPUT_BITS (RB750_NAND_DATA_BITS | RB750_NAND_RDY) -+#define RB750_NAND_OUTPUT_BITS (RB750_NAND_ALE | RB750_NAND_CLE | \ -+ RB750_NAND_NRE | RB750_NAND_NWE | \ -+ RB750_NAND_NCE) ++#ifndef __AR933X_UART_H ++#define __AR933X_UART_H ++ ++#define AR933X_UART_REGS_SIZE 20 ++#define AR933X_UART_FIFO_SIZE 16 ++ ++#define AR933X_UART_DATA_REG 0x00 ++#define AR933X_UART_CS_REG 0x04 ++#define AR933X_UART_CLOCK_REG 0x08 ++#define AR933X_UART_INT_REG 0x0c ++#define AR933X_UART_INT_EN_REG 0x10 ++ ++#define AR933X_UART_DATA_TX_RX_MASK 0xff ++#define AR933X_UART_DATA_RX_CSR BIT(8) ++#define AR933X_UART_DATA_TX_CSR BIT(9) ++ ++#define AR933X_UART_CS_PARITY_S 0 ++#define AR933X_UART_CS_PARITY_M 0x3 ++#define AR933X_UART_CS_PARITY_NONE 0 ++#define AR933X_UART_CS_PARITY_ODD 1 ++#define AR933X_UART_CS_PARITY_EVEN 2 ++#define AR933X_UART_CS_IF_MODE_S 2 ++#define AR933X_UART_CS_IF_MODE_M 0x3 ++#define AR933X_UART_CS_IF_MODE_NONE 0 ++#define AR933X_UART_CS_IF_MODE_DTE 1 ++#define AR933X_UART_CS_IF_MODE_DCE 2 ++#define AR933X_UART_CS_FLOW_CTRL_S 4 ++#define AR933X_UART_CS_FLOW_CTRL_M 0x3 ++#define AR933X_UART_CS_DMA_EN BIT(6) ++#define AR933X_UART_CS_TX_READY_ORIDE BIT(7) ++#define AR933X_UART_CS_RX_READY_ORIDE BIT(8) ++#define AR933X_UART_CS_TX_READY BIT(9) ++#define AR933X_UART_CS_RX_BREAK BIT(10) ++#define AR933X_UART_CS_TX_BREAK BIT(11) ++#define AR933X_UART_CS_HOST_INT BIT(12) ++#define AR933X_UART_CS_HOST_INT_EN BIT(13) ++#define AR933X_UART_CS_TX_BUSY BIT(14) ++#define AR933X_UART_CS_RX_BUSY BIT(15) ++ ++#define AR933X_UART_CLOCK_STEP_M 0xffff ++#define AR933X_UART_CLOCK_SCALE_M 0xfff ++#define AR933X_UART_CLOCK_SCALE_S 16 ++#define AR933X_UART_CLOCK_STEP_M 0xffff ++ ++#define AR933X_UART_INT_RX_VALID BIT(0) ++#define AR933X_UART_INT_TX_READY BIT(1) ++#define AR933X_UART_INT_RX_FRAMING_ERR BIT(2) ++#define AR933X_UART_INT_RX_OFLOW_ERR BIT(3) ++#define AR933X_UART_INT_TX_OFLOW_ERR BIT(4) ++#define AR933X_UART_INT_RX_PARITY_ERR BIT(5) ++#define AR933X_UART_INT_RX_BREAK_ON BIT(6) ++#define AR933X_UART_INT_RX_BREAK_OFF BIT(7) ++#define AR933X_UART_INT_RX_FULL BIT(8) ++#define AR933X_UART_INT_TX_EMPTY BIT(9) ++#define AR933X_UART_INT_ALLINTS 0x3ff ++ ++#endif /* __AR933X_UART_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h 2011-08-06 09:32:36.758018150 +0200 +@@ -0,0 +1,18 @@ ++/* ++ * Platform data definition for Atheros AR933X UART ++ * ++ * Copyright (C) 2011 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+struct rb750_nand_info { -+ struct nand_chip chip; -+ struct mtd_info mtd; ++#ifndef _AR933X_UART_PLATFORM_H ++#define _AR933X_UART_PLATFORM_H ++ ++struct ar933x_uart_platform_data { ++ unsigned uartclk; +}; + ++#endif /* _AR933X_UART_PLATFORM_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h 2011-04-27 12:19:21.877661867 +0200 +@@ -0,0 +1,56 @@ +/* -+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader -+ * will not be able to find the kernel that we load. ++ * Atheros AR71xx specific CPU feature overrides ++ * ++ * Copyright (C) 2008 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This file was derived from: include/asm-mips/cpu-features.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * Copyright (C) 2004 Maciej W. Rozycki ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * + */ -+static struct nand_ecclayout rb750_nand_ecclayout = { -+ .eccbytes = 6, -+ .eccpos = { 8, 9, 10, 13, 14, 15 }, -+ .oobavail = 9, -+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -+}; -+ -+static struct mtd_partition rb750_nand_partitions[] = { -+ { -+ .name = "booter", -+ .offset = 0, -+ .size = (256 * 1024), -+ .mask_flags = MTD_WRITEABLE, -+ }, { -+ .name = "kernel", -+ .offset = (256 * 1024), -+ .size = (4 * 1024 * 1024) - (256 * 1024), -+ }, { -+ .name = "rootfs", -+ .offset = MTDPART_OFS_NXTBLK, -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static void rb750_nand_write(const u8 *buf, unsigned len) -+{ -+ void __iomem *base = ar71xx_gpio_base; -+ u32 out; -+ unsigned i; ++#ifndef __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H ++#define __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H + -+ /* set data lines to output mode */ -+ __raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_DATA_BITS, -+ base + GPIO_REG_OE); ++#define cpu_has_tlb 1 ++#define cpu_has_4kex 1 ++#define cpu_has_3k_cache 0 ++#define cpu_has_4k_cache 1 ++#define cpu_has_tx39_cache 0 ++#define cpu_has_sb1_cache 0 ++#define cpu_has_fpu 0 ++#define cpu_has_32fpr 0 ++#define cpu_has_counter 1 ++#define cpu_has_watch 1 ++#define cpu_has_divec 1 + -+ out = __raw_readl(base + GPIO_REG_OUT); -+ out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE); -+ for (i = 0; i != len; i++) { -+ u32 data; ++#define cpu_has_prefetch 1 ++#define cpu_has_ejtag 1 ++#define cpu_has_llsc 1 + -+ data = buf[i]; -+ data <<= RB750_NAND_DATA_SHIFT; -+ data |= out; -+ __raw_writel(data, base + GPIO_REG_OUT); ++#define cpu_has_mips16 1 ++#define cpu_has_mdmx 0 ++#define cpu_has_mips3d 0 ++#define cpu_has_smartmips 0 + -+ __raw_writel(data | RB750_NAND_NWE, base + GPIO_REG_OUT); -+ /* flush write */ -+ __raw_readl(base + GPIO_REG_OUT); -+ } ++#define cpu_has_mips32r1 1 ++#define cpu_has_mips32r2 1 ++#define cpu_has_mips64r1 0 ++#define cpu_has_mips64r2 0 + -+ /* set data lines to input mode */ -+ __raw_writel(__raw_readl(base + GPIO_REG_OE) & ~RB750_NAND_DATA_BITS, -+ base + GPIO_REG_OE); -+ /* flush write */ -+ __raw_readl(base + GPIO_REG_OE); -+} ++#define cpu_has_dsp 0 ++#define cpu_has_mipsmt 0 + -+static int rb750_nand_read_verify(u8 *read_buf, unsigned len, -+ const u8 *verify_buf) -+{ -+ void __iomem *base = ar71xx_gpio_base; -+ unsigned i; ++#define cpu_has_64bits 0 ++#define cpu_has_64bit_zero_reg 0 ++#define cpu_has_64bit_gp_regs 0 ++#define cpu_has_64bit_addresses 0 + -+ for (i = 0; i < len; i++) { -+ u8 data; ++#define cpu_dcache_line_size() 32 ++#define cpu_icache_line_size() 32 + -+ /* activate RE line */ -+ __raw_writel(RB750_NAND_NRE, base + GPIO_REG_CLEAR); -+ /* flush write */ -+ __raw_readl(base + GPIO_REG_CLEAR); ++#endif /* __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/gpio.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h 2011-04-27 12:19:21.877661867 +0200 +@@ -0,0 +1,53 @@ ++/* ++ * Atheros AR71xx GPIO API definitions ++ * ++ * Copyright (C) 2008 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ + -+ /* read input lines */ -+ data = __raw_readl(base + GPIO_REG_IN) >> RB750_NAND_DATA_SHIFT; ++#ifndef __ASM_MACH_AR71XX_GPIO_H ++#define __ASM_MACH_AR71XX_GPIO_H + -+ /* deactivate RE line */ -+ __raw_writel(RB750_NAND_NRE, base + GPIO_REG_SET); ++#define ARCH_NR_GPIOS 64 ++#include + -+ if (read_buf) -+ read_buf[i] = data; -+ else if (verify_buf && verify_buf[i] != data) -+ return -EFAULT; -+ } ++#include + -+ return 0; -+} ++extern unsigned long ar71xx_gpio_count; ++extern void __ar71xx_gpio_set_value(unsigned gpio, int value); ++extern int __ar71xx_gpio_get_value(unsigned gpio); + -+static void rb750_nand_select_chip(struct mtd_info *mtd, int chip) ++static inline int gpio_to_irq(unsigned gpio) +{ -+ void __iomem *base = ar71xx_gpio_base; -+ u32 func; -+ -+ func = __raw_readl(base + GPIO_REG_FUNC); -+ if (chip >= 0) { -+ /* disable latch */ -+ rb750_latch_change(RB750_LVC573_LE, 0); -+ -+ /* disable alternate functions */ -+ ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, -+ AR724X_GPIO_FUNC_SPI_EN); -+ -+ /* set input mode for data lines */ -+ __raw_writel(__raw_readl(base + GPIO_REG_OE) & -+ ~RB750_NAND_INPUT_BITS, -+ base + GPIO_REG_OE); -+ -+ /* deactivate RE and WE lines */ -+ __raw_writel(RB750_NAND_NRE | RB750_NAND_NWE, -+ base + GPIO_REG_SET); -+ /* flush write */ -+ (void) __raw_readl(base + GPIO_REG_SET); -+ -+ /* activate CE line */ -+ __raw_writel(RB750_NAND_NCE, base + GPIO_REG_CLEAR); -+ } else { -+ /* deactivate CE line */ -+ __raw_writel(RB750_NAND_NCE, base + GPIO_REG_SET); -+ /* flush write */ -+ (void) __raw_readl(base + GPIO_REG_SET); -+ -+ __raw_writel(__raw_readl(base + GPIO_REG_OE) | -+ RB750_NAND_IO0 | RB750_NAND_RDY, -+ base + GPIO_REG_OE); -+ -+ /* restore alternate functions */ -+ ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN, -+ AR724X_GPIO_FUNC_JTAG_DISABLE); -+ -+ /* enable latch */ -+ rb750_latch_change(0, RB750_LVC573_LE); -+ } ++ return AR71XX_GPIO_IRQ(gpio); +} + -+static int rb750_nand_dev_ready(struct mtd_info *mtd) ++static inline int irq_to_gpio(unsigned irq) +{ -+ void __iomem *base = ar71xx_gpio_base; -+ -+ return !!(__raw_readl(base + GPIO_REG_IN) & RB750_NAND_RDY); ++ return irq - AR71XX_GPIO_IRQ_BASE; +} + -+static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, -+ unsigned int ctrl) ++static inline int gpio_get_value(unsigned gpio) +{ -+ if (ctrl & NAND_CTRL_CHANGE) { -+ void __iomem *base = ar71xx_gpio_base; -+ u32 t; -+ -+ t = __raw_readl(base + GPIO_REG_OUT); -+ -+ t &= ~(RB750_NAND_CLE | RB750_NAND_ALE); -+ t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0; -+ t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0; -+ -+ __raw_writel(t, base + GPIO_REG_OUT); -+ /* flush write */ -+ __raw_readl(base + GPIO_REG_OUT); -+ } ++ if (gpio < ar71xx_gpio_count) ++ return __ar71xx_gpio_get_value(gpio); + -+ if (cmd != NAND_CMD_NONE) { -+ u8 t = cmd; -+ rb750_nand_write(&t, 1); -+ } ++ return __gpio_get_value(gpio); +} + -+static u8 rb750_nand_read_byte(struct mtd_info *mtd) ++static inline void gpio_set_value(unsigned gpio, int value) +{ -+ u8 data = 0; -+ rb750_nand_read_verify(&data, 1, NULL); -+ return data; ++ if (gpio < ar71xx_gpio_count) ++ __ar71xx_gpio_set_value(gpio, value); ++ else ++ __gpio_set_value(gpio, value); +} + -+static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len) -+{ -+ rb750_nand_read_verify(buf, len, NULL); -+} ++#define gpio_cansleep __gpio_cansleep + -+static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len) -+{ -+ rb750_nand_write(buf, len); -+} ++#endif /* __ASM_MACH_AR71XX_GPIO_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/irq.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/irq.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h 2011-04-27 12:19:21.877661867 +0200 +@@ -0,0 +1,17 @@ ++/* ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++#ifndef __ASM_MACH_AR71XX_IRQ_H ++#define __ASM_MACH_AR71XX_IRQ_H + -+static int rb750_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, int len) -+{ -+ return rb750_nand_read_verify(NULL, len, buf); -+} ++#define MIPS_CPU_IRQ_BASE 0 ++#define NR_IRQS 80 + -+static void __init rb750_nand_gpio_init(void) -+{ -+ void __iomem *base = ar71xx_gpio_base; -+ u32 out; ++#include_next + -+ out = __raw_readl(base + GPIO_REG_OUT); ++#endif /* __ASM_MACH_AR71XX_IRQ_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h 2011-04-27 12:19:21.877661867 +0200 +@@ -0,0 +1,32 @@ ++/* ++ * Atheros AR71xx specific kernel entry setup ++ * ++ * Copyright (C) 2009 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ ++#ifndef __ASM_MACH_AR71XX_KERNEL_ENTRY_H ++#define __ASM_MACH_AR71XX_KERNEL_ENTRY_H + -+ /* setup output levels */ -+ __raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE, -+ base + GPIO_REG_SET); ++ /* ++ * Some bootloaders set the 'Kseg0 coherency algorithm' to ++ * 'Cacheable, noncoherent, write-through, no write allocate' ++ * and this cause performance issues. Let's go and change it to ++ * 'Cacheable, noncoherent, write-back, write allocate' ++ */ ++ .macro kernel_entry_setup ++ mfc0 t0, CP0_CONFIG ++ li t1, ~CONF_CM_CMASK ++ and t0, t1 ++ ori t0, CONF_CM_CACHABLE_NONCOHERENT ++ mtc0 t0, CP0_CONFIG ++ nop ++ .endm + -+ __raw_writel(RB750_NAND_ALE | RB750_NAND_CLE, -+ base + GPIO_REG_CLEAR); ++ .macro smp_slave_setup ++ .endm + -+ /* setup input lines */ -+ __raw_writel(__raw_readl(base + GPIO_REG_OE) & ~(RB750_NAND_INPUT_BITS), -+ base + GPIO_REG_OE); ++#endif /* __ASM_MACH_AR71XX_KERNEL_ENTRY_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mach-rb750.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mach-rb750.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h 2011-04-27 12:19:21.877661867 +0200 +@@ -0,0 +1,66 @@ ++/* ++ * MikroTik RouterBOARD 750 definitions ++ * ++ * Copyright (C) 2010 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++#ifndef _MACH_RB750_H ++#define _MACH_RB750_H + -+ /* setup output lines */ -+ __raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_OUTPUT_BITS, -+ base + GPIO_REG_OE); ++#include + -+ rb750_latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0); -+} ++#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */ ++#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */ ++#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */ ++#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */ ++#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */ ++#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */ ++#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */ ++#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */ ++#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */ ++#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */ ++#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */ ++#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */ ++#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */ ++#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */ ++#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */ + -+static int __init rb750_nand_probe(struct platform_device *pdev) -+{ -+ struct rb750_nand_info *info; -+ int ret; ++#define RB750_GPIO_BTN_RESET 1 ++#define RB750_GPIO_SPI_CS0 2 ++#define RB750_GPIO_LED_ACT 12 ++#define RB750_GPIO_LED_PORT1 13 ++#define RB750_GPIO_LED_PORT2 14 ++#define RB750_GPIO_LED_PORT3 15 ++#define RB750_GPIO_LED_PORT4 16 ++#define RB750_GPIO_LED_PORT5 17 + -+ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); ++#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT) ++#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1) ++#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2) ++#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3) ++#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4) ++#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5) + -+ rb750_nand_gpio_init(); ++#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE) + -+ info = kzalloc(sizeof(*info), GFP_KERNEL); -+ if (!info) -+ return -ENOMEM; ++#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \ ++ RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT) + -+ info->chip.priv = &info; -+ info->mtd.priv = &info->chip; -+ info->mtd.owner = THIS_MODULE; ++struct rb750_led_data { ++ char *name; ++ char *default_trigger; ++ u32 mask; ++ int active_low; ++}; + -+ info->chip.select_chip = rb750_nand_select_chip; -+ info->chip.cmd_ctrl = rb750_nand_cmd_ctrl; -+ info->chip.dev_ready = rb750_nand_dev_ready; -+ info->chip.read_byte = rb750_nand_read_byte; -+ info->chip.write_buf = rb750_nand_write_buf; -+ info->chip.read_buf = rb750_nand_read_buf; -+ info->chip.verify_buf = rb750_nand_verify_buf; ++struct rb750_led_platform_data { ++ int num_leds; ++ struct rb750_led_data *leds; ++}; + -+ info->chip.chip_delay = 25; -+ info->chip.ecc.mode = NAND_ECC_SOFT; -+ info->chip.options |= NAND_NO_AUTOINCR; ++int rb750_latch_change(u32 mask_clr, u32 mask_set); + -+ platform_set_drvdata(pdev, info); ++#endif /* _MACH_RB750_H */ +\ No newline at end of file +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h 2011-04-27 12:19:21.877661867 +0200 +@@ -0,0 +1,45 @@ ++/* ++ * Copyright (C) 2008 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ ret = nand_scan_ident(&info->mtd, 1); -+ if (ret) { -+ ret = -ENXIO; -+ goto err_free_info; -+ } ++#ifndef __ASM_MACH_AR71XX_MANGLE_PORT_H ++#define __ASM_MACH_AR71XX_MANGLE_PORT_H + -+ if (info->mtd.writesize == 512) -+ info->chip.ecc.layout = &rb750_nand_ecclayout; ++#define __swizzle_addr_b(port) ((port) ^ 3) ++#define __swizzle_addr_w(port) ((port) ^ 2) ++#define __swizzle_addr_l(port) (port) ++#define __swizzle_addr_q(port) (port) + -+ ret = nand_scan_tail(&info->mtd); -+ if (ret) { -+ return -ENXIO; -+ goto err_set_drvdata; -+ } ++#if defined(CONFIG_SWAP_IO_SPACE) ++ ++# define ioswabb(a, x) (x) ++# define __mem_ioswabb(a, x) (x) ++# define ioswabw(a, x) le16_to_cpu(x) ++# define __mem_ioswabw(a, x) (x) ++# define ioswabl(a, x) le32_to_cpu(x) ++# define __mem_ioswabl(a, x) (x) ++# define ioswabq(a, x) le64_to_cpu(x) ++# define __mem_ioswabq(a, x) (x) + -+#ifdef CONFIG_MTD_PARTITIONS -+ ret = add_mtd_partitions(&info->mtd, rb750_nand_partitions, -+ ARRAY_SIZE(rb750_nand_partitions)); +#else -+ ret = add_mtd_device(&info->mtd); -+#endif -+ if (ret) -+ goto err_release_nand; + -+ return 0; ++# define ioswabb(a, x) (x) ++# define __mem_ioswabb(a, x) (x) ++# define ioswabw(a, x) (x) ++# define __mem_ioswabw(a, x) cpu_to_le16(x) ++# define ioswabl(a, x) (x) ++# define __mem_ioswabl(a, x) cpu_to_le32(x) ++# define ioswabq(a, x) (x) ++# define __mem_ioswabq(a, x) cpu_to_le64(x) + -+ err_release_nand: -+ nand_release(&info->mtd); -+ err_set_drvdata: -+ platform_set_drvdata(pdev, NULL); -+ err_free_info: -+ kfree(info); -+ return ret; -+} ++#endif + -+static int __devexit rb750_nand_remove(struct platform_device *pdev) -+{ -+ struct rb750_nand_info *info = platform_get_drvdata(pdev); ++#endif /* __ASM_MACH_AR71XX_MANGLE_PORT_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/pci.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/pci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h 2011-04-27 12:19:21.877661867 +0200 +@@ -0,0 +1,46 @@ ++/* ++ * Atheros AR71xx SoC specific PCI definitions ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ nand_release(&info->mtd); -+ platform_set_drvdata(pdev, NULL); -+ kfree(info); ++#ifndef __ASM_MACH_AR71XX_PCI_H ++#define __ASM_MACH_AR71XX_PCI_H + -+ return 0; -+} ++struct pci_dev; + -+static struct platform_driver rb750_nand_driver = { -+ .probe = rb750_nand_probe, -+ .remove = __devexit_p(rb750_nand_remove), -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, ++struct ar71xx_pci_irq { ++ int irq; ++ u8 slot; ++ u8 pin; +}; + -+static int __init rb750_nand_init(void) -+{ -+ return platform_driver_register(&rb750_nand_driver); -+} ++#ifdef CONFIG_PCI ++extern int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev); ++extern unsigned ar71xx_pci_nr_irqs __initdata; ++extern struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata; + -+static void __exit rb750_nand_exit(void) ++int ar71xx_pcibios_map_irq(const struct pci_dev *dev, ++ uint8_t slot, uint8_t pin) __init; ++int ar71xx_pcibios_init(void) __init; ++ ++int ar71xx_pci_be_handler(int is_fixup); ++ ++int ar724x_pcibios_map_irq(const struct pci_dev *dev, ++ uint8_t slot, uint8_t pin) __init; ++int ar724x_pcibios_init(void) __init; ++ ++int ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) __init; ++#else ++static inline int ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) +{ -+ platform_driver_unregister(&rb750_nand_driver); ++ return 0; +} ++#endif + -+module_init(rb750_nand_init); -+module_exit(rb750_nand_exit); -+ -+MODULE_DESCRIPTION(DRV_DESC); -+MODULE_VERSION(DRV_VERSION); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_LICENSE("GPL v2"); -diff -Nur linux-2.6.39.orig/drivers/mtd/wrt160nl_part.c linux-2.6.39/drivers/mtd/wrt160nl_part.c ---- linux-2.6.39.orig/drivers/mtd/wrt160nl_part.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/mtd/wrt160nl_part.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,181 @@ ++#endif /* __ASM_MACH_AR71XX_PCI_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/platform.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/platform.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h 2011-08-22 07:40:11.890481646 +0200 +@@ -0,0 +1,63 @@ +/* -+ * Copyright (C) 2009 Christian Daniel -+ * Copyright (C) 2009 Gabor Juhos ++ * Atheros AR71xx SoC specific platform data definitions + * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * -+ * TRX flash partition table. -+ * Based on ar7 map by Felix Fietkau ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. + */ + -+#include -+#include -+#include -+ -+#include -+#include ++#ifndef __ASM_MACH_AR71XX_PLATFORM_H ++#define __ASM_MACH_AR71XX_PLATFORM_H + -+struct cybertan_header { -+ char magic[4]; -+ u8 res1[4]; -+ char fw_date[3]; -+ char fw_ver[3]; -+ char id[4]; -+ char hw_ver; -+ char unused; -+ u8 flags[2]; -+ u8 res2[10]; -+}; ++#include ++#include ++#include ++#include + -+#define TRX_PARTS 6 -+#define TRX_MAGIC 0x30524448 -+#define TRX_MAX_OFFSET 3 ++struct ag71xx_platform_data { ++ phy_interface_t phy_if_mode; ++ u32 phy_mask; ++ int speed; ++ int duplex; ++ u32 reset_bit; ++ u32 mii_if; ++ u8 mac_addr[ETH_ALEN]; ++ struct device *mii_bus_dev; + -+struct trx_header { -+ uint32_t magic; /* "HDR0" */ -+ uint32_t len; /* Length of file including header */ -+ uint32_t crc32; /* 32-bit CRC from flag_version to end of file */ -+ uint32_t flag_version; /* 0:15 flags, 16:31 version */ -+ uint32_t offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ -+}; ++ u8 has_gbit:1; ++ u8 is_ar91xx:1; ++ u8 is_ar7240:1; ++ u8 is_ar724x:1; ++ u8 has_ar8216:1; ++ u8 has_ar7240_switch:1; + -+#define IH_MAGIC 0x27051956 /* Image Magic Number */ -+#define IH_NMLEN 32 /* Image Name Length */ ++ void (*ddr_flush)(void); ++ void (*set_pll)(int speed); + -+struct uimage_header { -+ uint32_t ih_magic; /* Image Header Magic Number */ -+ uint32_t ih_hcrc; /* Image Header CRC Checksum */ -+ uint32_t ih_time; /* Image Creation Timestamp */ -+ uint32_t ih_size; /* Image Data Size */ -+ uint32_t ih_load; /* Data» Load Address */ -+ uint32_t ih_ep; /* Entry Point Address */ -+ uint32_t ih_dcrc; /* Image Data CRC Checksum */ -+ uint8_t ih_os; /* Operating System */ -+ uint8_t ih_arch; /* CPU architecture */ -+ uint8_t ih_type; /* Image Type */ -+ uint8_t ih_comp; /* Compression Type */ -+ uint8_t ih_name[IH_NMLEN]; /* Image Name */ ++ u32 fifo_cfg1; ++ u32 fifo_cfg2; ++ u32 fifo_cfg3; +}; + -+struct wrt160nl_header { -+ struct cybertan_header cybertan; -+ struct trx_header trx; -+ struct uimage_header uimage; -+} __attribute__ ((packed)); -+ -+static struct mtd_partition trx_parts[TRX_PARTS]; -+ -+static int wrt160nl_parse_partitions(struct mtd_info *master, -+ struct mtd_partition **pparts, -+ unsigned long origin) -+{ -+ struct wrt160nl_header *header; -+ struct trx_header *theader; -+ struct uimage_header *uheader; -+ size_t retlen; -+ unsigned int kernel_len; -+ int ret; -+ -+ header = vmalloc(sizeof(*header)); -+ if (!header) { -+ return -ENOMEM; -+ goto out; -+ } -+ -+ ret = master->read(master, 4 * master->erasesize, sizeof(*header), -+ &retlen, (void *) header); -+ if (ret) -+ goto free_hdr; -+ -+ if (retlen != sizeof(*header)) { -+ ret = -EIO; -+ goto free_hdr; -+ } -+ -+ if (strncmp(header->cybertan.magic, "NL16", 4) != 0) { -+ printk(KERN_NOTICE "%s: no WRT160NL signature found\n", -+ master->name); -+ goto free_hdr; -+ } -+ -+ theader = &header->trx; -+ if (le32_to_cpu(theader->magic) != TRX_MAGIC) { -+ printk(KERN_NOTICE "%s: no TRX header found\n", master->name); -+ goto free_hdr; -+ } -+ -+ uheader = &header->uimage; -+ if (uheader->ih_magic != IH_MAGIC) { -+ printk(KERN_NOTICE "%s: no uImage found\n", master->name); -+ goto free_hdr; -+ } -+ -+ kernel_len = le32_to_cpu(theader->offsets[1]) + sizeof(struct cybertan_header); -+ -+ trx_parts[0].name = "u-boot"; -+ trx_parts[0].offset = 0; -+ trx_parts[0].size = 4 * master->erasesize; -+ trx_parts[0].mask_flags = MTD_WRITEABLE; -+ -+ trx_parts[1].name = "kernel"; -+ trx_parts[1].offset = trx_parts[0].offset + trx_parts[0].size; -+ trx_parts[1].size = kernel_len; -+ trx_parts[1].mask_flags = 0; -+ -+ trx_parts[2].name = "rootfs"; -+ trx_parts[2].offset = trx_parts[1].offset + trx_parts[1].size; -+ trx_parts[2].size = master->size - 6 * master->erasesize - trx_parts[1].size; -+ trx_parts[2].mask_flags = 0; -+ -+ trx_parts[3].name = "nvram"; -+ trx_parts[3].offset = master->size - 2 * master->erasesize; -+ trx_parts[3].size = master->erasesize; -+ trx_parts[3].mask_flags = MTD_WRITEABLE; ++struct ag71xx_mdio_platform_data { ++ u32 phy_mask; ++ int is_ar7240; ++}; + -+ trx_parts[4].name = "art"; -+ trx_parts[4].offset = master->size - master->erasesize; -+ trx_parts[4].size = master->erasesize; -+ trx_parts[4].mask_flags = MTD_WRITEABLE; ++struct ar71xx_ehci_platform_data { ++ u8 is_ar91xx; ++}; + -+ trx_parts[5].name = "firmware"; -+ trx_parts[5].offset = 4 * master->erasesize; -+ trx_parts[5].size = master->size - 6 * master->erasesize; -+ trx_parts[5].mask_flags = 0; ++struct ar71xx_spi_platform_data { ++ unsigned bus_num; ++ unsigned num_chipselect; ++ u32 (*get_ioc_base)(u8 chip_select, int cs_high, int is_on); ++}; + -+ *pparts = trx_parts; -+ ret = TRX_PARTS; ++#define AR71XX_SPI_CS_INACTIVE 0 ++#define AR71XX_SPI_CS_ACTIVE 1 + -+ free_hdr: -+ vfree(header); -+ out: -+ return ret; -+} ++#endif /* __ASM_MACH_AR71XX_PLATFORM_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h 2011-04-27 12:19:21.867661560 +0200 +@@ -0,0 +1,48 @@ ++/* ++ * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards ++ * ++ * Copyright (C) 2010 Gabor Juhos ++ * ++ * This file was based on the patches for Linux 2.6.27.39 published by ++ * MikroTik for their RouterBoard 4xx series devices. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+static struct mtd_part_parser wrt160nl_parser = { -+ .owner = THIS_MODULE, -+ .parse_fn = wrt160nl_parse_partitions, -+ .name = "wrt160nl", ++#define CPLD_GPIO_nLED1 0 ++#define CPLD_GPIO_nLED2 1 ++#define CPLD_GPIO_nLED3 2 ++#define CPLD_GPIO_nLED4 3 ++#define CPLD_GPIO_FAN 4 ++#define CPLD_GPIO_ALE 5 ++#define CPLD_GPIO_CLE 6 ++#define CPLD_GPIO_nCE 7 ++#define CPLD_GPIO_nLED5 8 ++ ++#define CPLD_NUM_GPIOS 9 ++ ++#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1) ++#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2) ++#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3) ++#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4) ++#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN) ++#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE) ++#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE) ++#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE) ++#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5) ++ ++struct rb4xx_cpld_platform_data { ++ unsigned gpio_base; +}; + -+static int __init wrt160nl_parser_init(void) -+{ -+ return register_mtd_parser(&wrt160nl_parser); -+} ++extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value); ++extern int rb4xx_cpld_read(unsigned char *rx_buf, ++ const unsigned char *verify_buf, ++ unsigned cnt); ++extern int rb4xx_cpld_read_from(unsigned addr, ++ unsigned char *rx_buf, ++ const unsigned char *verify_buf, ++ unsigned cnt); ++extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count); +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/war.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h +--- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/war.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h 2011-04-27 12:19:21.867661560 +0200 +@@ -0,0 +1,25 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle ++ */ ++#ifndef __ASM_MACH_AR71XX_WAR_H ++#define __ASM_MACH_AR71XX_WAR_H + -+module_init(wrt160nl_parser_init); ++#define R4600_V1_INDEX_ICACHEOP_WAR 0 ++#define R4600_V1_HIT_CACHEOP_WAR 0 ++#define R4600_V2_HIT_CACHEOP_WAR 0 ++#define R5432_CP0_INTERRUPT_WAR 0 ++#define BCM1250_M3_WAR 0 ++#define SIBYTE_1956_WAR 0 ++#define MIPS4K_ICACHE_REFILL_WAR 0 ++#define MIPS_CACHE_SYNC_WAR 0 ++#define TX49XX_ICACHE_INDEX_INV_WAR 0 ++#define RM9000_CDEX_SMP_WAR 0 ++#define ICACHE_REFILLS_WORKAROUND_WAR 0 ++#define R10000_LLSC_WAR 0 ++#define MIPS34K_MISSED_ITLB_WAR 0 + -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Christian Daniel "); -diff -Nur linux-2.6.39.orig/drivers/net/Kconfig linux-2.6.39/drivers/net/Kconfig ---- linux-2.6.39.orig/drivers/net/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -2071,6 +2071,8 @@ ++#endif /* __ASM_MACH_AR71XX_WAR_H */ +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/time.h linux-2.6.39/arch/mips/include/asm/time.h +--- linux-2.6.39.orig/arch/mips/include/asm/time.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/include/asm/time.h 2011-08-24 05:53:05.239228886 +0200 +@@ -52,6 +52,7 @@ + */ + #ifdef CONFIG_CEVT_R4K_LIB + extern unsigned int __weak get_c0_compare_int(void); ++extern unsigned int __weak get_c0_compare_irq(void); + extern int r4k_clockevent_init(void); + #endif - The safe and default value for this is N. +diff -Nur linux-2.6.39.orig/arch/mips/Kconfig linux-2.6.39/arch/mips/Kconfig +--- linux-2.6.39.orig/arch/mips/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/Kconfig 2011-08-24 02:42:39.969240338 +0200 +@@ -84,6 +84,23 @@ + help + Support for the Atheros AR71XX/AR724X/AR913X SoCs. -+source drivers/net/ag71xx/Kconfig ++config ATHEROS_AR71XX ++ bool "Atheros AR71xx based boards" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select ARCH_REQUIRE_GPIOLIB ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_EARLY_PRINTK ++ select MIPS_MACHINE ++ help ++ Support for Atheros AR71xx based boards. + - config DL2K - tristate "DL2000/TC902x-based Gigabit Ethernet support" - depends on PCI -diff -Nur linux-2.6.39.orig/drivers/net/Makefile linux-2.6.39/drivers/net/Makefile ---- linux-2.6.39.orig/drivers/net/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -112,6 +112,7 @@ - # end link order section - # + config BCM47XX + bool "Broadcom BCM47XX based boards" + select CEVT_R4K +@@ -739,6 +756,7 @@ + endchoice -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_SUNDANCE) += sundance.o - obj-$(CONFIG_HAMACHI) += hamachi.o - obj-$(CONFIG_NET) += Space.o loopback.o -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/Kconfig linux-2.6.39/drivers/net/ag71xx/Kconfig ---- linux-2.6.39.orig/drivers/net/ag71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,33 @@ -+config AG71XX -+ tristate "Atheros AR71xx built-in ethernet mac support" -+ depends on ATHEROS_AR71XX -+ select PHYLIB -+ help -+ If you wish to compile a kernel for AR71xx/91xx and enable -+ ethernet support, then you should always answer Y to this. + source "arch/mips/alchemy/Kconfig" ++source "arch/mips/ar71xx/Kconfig" + source "arch/mips/ath79/Kconfig" + source "arch/mips/bcm63xx/Kconfig" + source "arch/mips/jazz/Kconfig" +@@ -907,6 +925,9 @@ + config MIPS_DISABLE_OBSOLETE_IDE + bool + ++config MYLOADER ++ bool + -+if AG71XX + config SYNC_R4K + bool + +diff -Nur linux-2.6.39.orig/arch/mips/Kconfig.orig linux-2.6.39/arch/mips/Kconfig.orig +--- linux-2.6.39.orig/arch/mips/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/Kconfig.orig 2011-08-22 16:21:32.077979816 +0200 +@@ -0,0 +1,2472 @@ ++config MIPS ++ bool ++ default y ++ select HAVE_GENERIC_DMA_COHERENT ++ select HAVE_IDE ++ select HAVE_OPROFILE ++ select HAVE_IRQ_WORK ++ select HAVE_PERF_EVENTS ++ select PERF_USE_VMALLOC ++ select HAVE_ARCH_KGDB ++ select HAVE_FUNCTION_TRACER ++ select HAVE_FUNCTION_TRACE_MCOUNT_TEST ++ select HAVE_DYNAMIC_FTRACE ++ select HAVE_FTRACE_MCOUNT_RECORD ++ select HAVE_C_RECORDMCOUNT ++ select HAVE_FUNCTION_GRAPH_TRACER ++ select HAVE_KPROBES ++ select HAVE_KRETPROBES ++ select RTC_LIB if !MACH_LOONGSON ++ select GENERIC_ATOMIC64 if !64BIT ++ select HAVE_DMA_ATTRS ++ select HAVE_DMA_API_DEBUG ++ select HAVE_GENERIC_HARDIRQS ++ select GENERIC_IRQ_PROBE ++ select GENERIC_IRQ_SHOW ++ select HAVE_ARCH_JUMP_LABEL ++ ++menu "Machine selection" ++ ++config ZONE_DMA ++ bool ++ ++choice ++ prompt "System type" ++ default SGI_IP22 ++ ++config MIPS_ALCHEMY ++ bool "Alchemy processor based machines" ++ select 64BIT_PHYS_ADDR ++ select CEVT_R4K_LIB ++ select CSRC_R4K_LIB ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_APM_EMULATION ++ select GENERIC_GPIO ++ select ARCH_WANT_OPTIONAL_GPIOLIB ++ select SYS_SUPPORTS_ZBOOT ++ ++config AR7 ++ bool "Texas Instruments AR7" ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select NO_EXCEPT_FILL ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_ZBOOT_UART16550 ++ select ARCH_REQUIRE_GPIOLIB ++ select GCD ++ select VLYNQ ++ help ++ Support for the Texas Instruments AR7 System-on-a-Chip ++ family: TNETD7100, 7200 and 7300. + -+config AG71XX_DEBUG -+ bool "Atheros AR71xx built-in ethernet driver debugging" -+ default n ++config ATH79 ++ bool "Atheros AR71XX/AR724X/AR913X based boards" ++ select ARCH_REQUIRE_GPIOLIB ++ select BOOT_RAW ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select MIPS_MACHINE ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN + help -+ Atheros AR71xx built-in ethernet driver debugging messages. ++ Support for the Atheros AR71XX/AR724X/AR913X SoCs. + -+config AG71XX_DEBUG_FS -+ bool "Atheros AR71xx built-in ethernet driver debugfs support" -+ depends on DEBUG_FS -+ default n ++config ATHEROS_AR71XX ++ bool "Atheros AR71xx based boards" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select ARCH_REQUIRE_GPIOLIB ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_EARLY_PRINTK ++ select MIPS_MACHINE + help -+ Say Y, if you need access to various statistics provided by -+ the ag71xx driver. ++ Support for Atheros AR71xx based boards. + -+config AG71XX_AR8216_SUPPORT -+ bool "special support for the Atheros AR8216 switch" -+ default n -+ default y if AR71XX_MACH_WNR2000 || AR71XX_MACH_MZK_W04NU ++config BCM47XX ++ bool "Broadcom BCM47XX based boards" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SSB ++ select SSB_DRIVER_MIPS ++ select SSB_DRIVER_EXTIF ++ select SSB_EMBEDDED ++ select SSB_B43_PCI_BRIDGE if PCI ++ select SSB_PCICORE_HOSTMODE if PCI ++ select GENERIC_GPIO ++ select SYS_HAS_EARLY_PRINTK ++ select CFE + help -+ Say 'y' here if you want to enable special support for the -+ Atheros AR8216 switch found on some boards. ++ Support for BCM47XX based boards + -+endif -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/Makefile linux-2.6.39/drivers/net/ag71xx/Makefile ---- linux-2.6.39.orig/drivers/net/ag71xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,14 @@ -+# -+# Makefile for the Atheros AR71xx built-in ethernet macs -+# ++config BCM63XX ++ bool "Broadcom BCM63XX based boards" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_EARLY_PRINTK ++ select SWAP_IO_SPACE ++ select ARCH_REQUIRE_GPIOLIB ++ help ++ Support for BCM63XX based boards + -+ag71xx-y += ag71xx_main.o -+ag71xx-y += ag71xx_ethtool.o -+ag71xx-y += ag71xx_phy.o -+ag71xx-y += ag71xx_mdio.o ++config MIPS_COBALT ++ bool "Cobalt Server" ++ select CEVT_R4K ++ select CSRC_R4K ++ select CEVT_GT641XX ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select I8253 ++ select I8259 ++ select IRQ_CPU ++ select IRQ_GT641XX ++ select PCI_GT64XXX_PCI0 ++ select PCI ++ select SYS_HAS_CPU_NEVADA ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN + -+ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o -+ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o ++config MACH_DECSTATION ++ bool "DECstations" ++ select BOOT_ELF32 ++ select CEVT_DS1287 ++ select CEVT_R4K ++ select CSRC_IOASIC ++ select CSRC_R4K ++ select CPU_DADDI_WORKAROUNDS if 64BIT ++ select CPU_R4000_WORKAROUNDS if 64BIT ++ select CPU_R4400_WORKAROUNDS if 64BIT ++ select DMA_NONCOHERENT ++ select NO_IOPORT ++ select IRQ_CPU ++ select SYS_HAS_CPU_R3000 ++ select SYS_HAS_CPU_R4X00 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_128HZ ++ select SYS_SUPPORTS_256HZ ++ select SYS_SUPPORTS_1024HZ ++ help ++ This enables support for DEC's MIPS based workstations. For details ++ see the Linux/MIPS FAQ on and the ++ DECstation porting pages on . + -+obj-$(CONFIG_AG71XX) += ag71xx.o ++ If you have one of the following DECstation Models you definitely ++ want to choose R4xx0 for the CPU Type: + -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx.h linux-2.6.39/drivers/net/ag71xx/ag71xx.h ---- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,500 @@ -+/* -+ * Atheros AR71xx built-in ethernet mac driver -+ * -+ * Copyright (C) 2008-2010 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Based on Atheros' AG7100 driver -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++ DECstation 5000/50 ++ DECstation 5000/150 ++ DECstation 5000/260 ++ DECsystem 5900/260 + -+#ifndef __AG71XX_H -+#define __AG71XX_H ++ otherwise choose R3000. + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++config MACH_JAZZ ++ bool "Jazz family of machines" ++ select ARC ++ select ARC32 ++ select ARCH_MAY_HAVE_PC_FDC ++ select CEVT_R4K ++ select CSRC_R4K ++ select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN ++ select GENERIC_ISA_DMA ++ select IRQ_CPU ++ select I8253 ++ select I8259 ++ select ISA ++ select SYS_HAS_CPU_R4X00 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL ++ select SYS_SUPPORTS_100HZ ++ help ++ This a family of machines based on the MIPS R4030 chipset which was ++ used by several vendors to build RISC/os and Windows NT workstations. ++ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and ++ Olivetti M700-10 workstations. + -+#include ++config MACH_JZ4740 ++ bool "Ingenic JZ4740 based machines" ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select GENERIC_GPIO ++ select ARCH_REQUIRE_GPIOLIB ++ select SYS_HAS_EARLY_PRINTK ++ select HAVE_PWM ++ select HAVE_CLK + -+#include -+#include ++config LASAT ++ bool "LASAT Networks platforms" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select SYS_HAS_EARLY_PRINTK ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select PCI_GT64XXX_PCI0 ++ select MIPS_NILE4 ++ select R5000_CPU_SCACHE ++ select SYS_HAS_CPU_R5000 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL if BROKEN ++ select SYS_SUPPORTS_LITTLE_ENDIAN + -+#define ETH_FCS_LEN 4 ++config MACH_LOONGSON ++ bool "Loongson family of machines" ++ select SYS_SUPPORTS_ZBOOT ++ help ++ This enables the support of Loongson family of machines. ++ ++ Loongson is a family of general-purpose MIPS-compatible CPUs. ++ developed at Institute of Computing Technology (ICT), ++ Chinese Academy of Sciences (CAS) in the People's Republic ++ of China. The chief architect is Professor Weiwu Hu. ++ ++config MIPS_MALTA ++ bool "MIPS Malta board" ++ select ARCH_MAY_HAVE_PC_FDC ++ select BOOT_ELF32 ++ select BOOT_RAW ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select GENERIC_ISA_DMA ++ select IRQ_CPU ++ select IRQ_GIC ++ select HW_HAS_PCI ++ select I8253 ++ select I8259 ++ select MIPS_BOARDS_GEN ++ select MIPS_BONITO64 ++ select MIPS_CPU_SCACHE ++ select PCI_GT64XXX_PCI0 ++ select MIPS_MSC ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_HAS_CPU_MIPS64_R1 ++ select SYS_HAS_CPU_NEVADA ++ select SYS_HAS_CPU_RM7000 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_MIPS_CMP ++ select SYS_SUPPORTS_MULTITHREADING ++ select SYS_SUPPORTS_SMARTMIPS ++ select SYS_SUPPORTS_ZBOOT ++ help ++ This enables support for the MIPS Technologies Malta evaluation ++ board. + -+#define AG71XX_DRV_NAME "ag71xx" -+#define AG71XX_DRV_VERSION "0.5.35" ++config MIPS_SIM ++ bool 'MIPS simulator (MIPSsim)' ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select SYS_HAS_EARLY_PRINTK ++ select IRQ_CPU ++ select BOOT_RAW ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_MULTITHREADING ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ help ++ This option enables support for MIPS Technologies MIPSsim software ++ emulator. + -+#define AG71XX_NAPI_WEIGHT 64 -+#define AG71XX_OOM_REFILL (1 + HZ/10) ++config NEC_MARKEINS ++ bool "NEC EMMA2RH Mark-eins board" ++ select SOC_EMMA2RH ++ select HW_HAS_PCI ++ help ++ This enables support for the NEC Electronics Mark-eins boards. + -+#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE) -+#define AG71XX_INT_TX (AG71XX_INT_TX_PS) -+#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF) ++config MACH_VR41XX ++ bool "NEC VR4100 series based machines" ++ select CEVT_R4K ++ select CSRC_R4K ++ select SYS_HAS_CPU_VR41XX ++ select ARCH_REQUIRE_GPIOLIB + -+#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX) -+#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL) ++config NXP_STB220 ++ bool "NXP STB220 board" ++ select SOC_PNX833X ++ help ++ Support for NXP Semiconductors STB220 Development Board. + -+#define AG71XX_TX_FIFO_LEN 2048 -+#define AG71XX_TX_MTU_LEN 1536 -+#define AG71XX_RX_PKT_RESERVE 64 -+#define AG71XX_RX_PKT_SIZE \ -+ (AG71XX_RX_PKT_RESERVE + ETH_HLEN + ETH_FRAME_LEN + ETH_FCS_LEN) ++config NXP_STB225 ++ bool "NXP 225 board" ++ select SOC_PNX833X ++ select SOC_PNX8335 ++ help ++ Support for NXP Semiconductors STB225 Development Board. + -+#define AG71XX_TX_RING_SIZE 64 -+#define AG71XX_TX_THRES_STOP (AG71XX_TX_RING_SIZE - 4) -+#define AG71XX_TX_THRES_WAKEUP \ -+ (AG71XX_TX_RING_SIZE - (AG71XX_TX_RING_SIZE / 4)) ++config PNX8550_JBS ++ bool "NXP PNX8550 based JBS board" ++ select PNX8550 ++ select SYS_SUPPORTS_LITTLE_ENDIAN + -+#define AG71XX_RX_RING_SIZE 128 ++config PNX8550_STB810 ++ bool "NXP PNX8550 based STB810 board" ++ select PNX8550 ++ select SYS_SUPPORTS_LITTLE_ENDIAN + -+#ifdef CONFIG_AG71XX_DEBUG -+#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args) -+#else -+#define DBG(fmt, args...) do {} while (0) -+#endif ++config PMC_MSP ++ bool "PMC-Sierra MSP chipsets" ++ depends on EXPERIMENTAL ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select SWAP_IO_SPACE ++ select NO_EXCEPT_FILL ++ select BOOT_RAW ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select IRQ_CPU ++ select SERIAL_8250 ++ select SERIAL_8250_CONSOLE ++ help ++ This adds support for the PMC-Sierra family of Multi-Service ++ Processor System-On-A-Chips. These parts include a number ++ of integrated peripherals, interfaces and DSPs in addition to ++ a variety of MIPS cores. + -+#define ag71xx_assert(_cond) \ -+do { \ -+ if (_cond) \ -+ break; \ -+ printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \ -+ BUG(); \ -+} while (0) ++config PMC_YOSEMITE ++ bool "PMC-Sierra Yosemite eval board" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_COHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select IRQ_CPU_RM7K ++ select IRQ_CPU_RM9K ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_RM9000 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_SMP ++ help ++ Yosemite is an evaluation board for the RM9000x2 processor ++ manufactured by PMC-Sierra. + -+struct ag71xx_desc { -+ u32 data; -+ u32 ctrl; -+#define DESC_EMPTY BIT(31) -+#define DESC_MORE BIT(24) -+#define DESC_PKTLEN_M 0xfff -+ u32 next; -+ u32 pad; -+} __attribute__((aligned(4))); ++config POWERTV ++ bool "Cisco PowerTV" ++ select BOOT_ELF32 ++ select CEVT_R4K ++ select CPU_MIPSR2_IRQ_VI ++ select CPU_MIPSR2_IRQ_EI ++ select CSRC_POWERTV ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select USB_OHCI_LITTLE_ENDIAN ++ help ++ This enables support for the Cisco PowerTV Platform. + -+struct ag71xx_buf { -+ struct sk_buff *skb; -+ struct ag71xx_desc *desc; -+ dma_addr_t dma_addr; -+ u32 pad; -+}; ++config SGI_IP22 ++ bool "SGI IP22 (Indy/Indigo2)" ++ select ARC ++ select ARC32 ++ select BOOT_ELF32 ++ select CEVT_R4K ++ select CSRC_R4K ++ select DEFAULT_SGI_PARTITION ++ select DMA_NONCOHERENT ++ select HW_HAS_EISA ++ select I8253 ++ select I8259 ++ select IP22_CPU_SCACHE ++ select IRQ_CPU ++ select GENERIC_ISA_DMA_SUPPORT_BROKEN ++ select SGI_HAS_I8042 ++ select SGI_HAS_INDYDOG ++ select SGI_HAS_HAL2 ++ select SGI_HAS_SEEQ ++ select SGI_HAS_WD93 ++ select SGI_HAS_ZILOG ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_R4X00 ++ select SYS_HAS_CPU_R5000 ++ # ++ # Disable EARLY_PRINTK for now since it leads to overwritten prom ++ # memory during early boot on some machines. ++ # ++ # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com ++ # for a more details discussion ++ # ++ # select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ help ++ This are the SGI Indy, Challenge S and Indigo2, as well as certain ++ OEM variants like the Tandem CMN B006S. To compile a Linux kernel ++ that runs on these, say Y here. ++ ++config SGI_IP27 ++ bool "SGI IP27 (Origin200/2000)" ++ select ARC ++ select ARC64 ++ select BOOT_ELF64 ++ select DEFAULT_SGI_PARTITION ++ select DMA_COHERENT ++ select SYS_HAS_EARLY_PRINTK ++ select HW_HAS_PCI ++ select NR_CPUS_DEFAULT_64 ++ select SYS_HAS_CPU_R10000 ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_NUMA ++ select SYS_SUPPORTS_SMP ++ help ++ This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics ++ workstations. To compile a Linux kernel that runs on these, say Y ++ here. ++ ++config SGI_IP28 ++ bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ select ARC ++ select ARC64 ++ select BOOT_ELF64 ++ select CEVT_R4K ++ select CSRC_R4K ++ select DEFAULT_SGI_PARTITION ++ select DMA_NONCOHERENT ++ select GENERIC_ISA_DMA_SUPPORT_BROKEN ++ select IRQ_CPU ++ select HW_HAS_EISA ++ select I8253 ++ select I8259 ++ select SGI_HAS_I8042 ++ select SGI_HAS_INDYDOG ++ select SGI_HAS_HAL2 ++ select SGI_HAS_SEEQ ++ select SGI_HAS_WD93 ++ select SGI_HAS_ZILOG ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_R10000 ++ # ++ # Disable EARLY_PRINTK for now since it leads to overwritten prom ++ # memory during early boot on some machines. ++ # ++ # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com ++ # for a more details discussion ++ # ++ # select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ help ++ This is the SGI Indigo2 with R10000 processor. To compile a Linux ++ kernel that runs on these, say Y here. ++ ++config SGI_IP32 ++ bool "SGI IP32 (O2)" ++ select ARC ++ select ARC32 ++ select BOOT_ELF32 ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select R5000_CPU_SCACHE ++ select RM7000_CPU_SCACHE ++ select SYS_HAS_CPU_R5000 ++ select SYS_HAS_CPU_R10000 if BROKEN ++ select SYS_HAS_CPU_RM7000 ++ select SYS_HAS_CPU_NEVADA ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ help ++ If you want this kernel to run on SGI O2 workstation, say Y here. ++ ++config SIBYTE_CRHINE ++ bool "Sibyte BCM91120C-CRhine" ++ depends on EXPERIMENTAL ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select SIBYTE_BCM1120 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_CARMEL ++ bool "Sibyte BCM91120x-Carmel" ++ depends on EXPERIMENTAL ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select SIBYTE_BCM1120 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_CRHONE ++ bool "Sibyte BCM91125C-CRhone" ++ depends on EXPERIMENTAL ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select SIBYTE_BCM1125 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_RHONE ++ bool "Sibyte BCM91125E-Rhone" ++ depends on EXPERIMENTAL ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select SIBYTE_BCM1125H ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_SWARM ++ bool "Sibyte BCM91250A-SWARM" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select HAVE_PATA_PLATFORM ++ select NR_CPUS_DEFAULT_2 ++ select SIBYTE_SB1250 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select ZONE_DMA32 if 64BIT ++ ++config SIBYTE_LITTLESUR ++ bool "Sibyte BCM91250C2-LittleSur" ++ depends on EXPERIMENTAL ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select HAVE_PATA_PLATFORM ++ select NR_CPUS_DEFAULT_2 ++ select SIBYTE_SB1250 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_SENTOSA ++ bool "Sibyte BCM91250E-Sentosa" ++ depends on EXPERIMENTAL ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select NR_CPUS_DEFAULT_2 ++ select SIBYTE_SB1250 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ ++config SIBYTE_BIGSUR ++ bool "Sibyte BCM91480B-BigSur" ++ select BOOT_ELF32 ++ select DMA_COHERENT ++ select NR_CPUS_DEFAULT_4 ++ select SIBYTE_BCM1x80 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_SB1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select ZONE_DMA32 if 64BIT ++ ++config SNI_RM ++ bool "SNI RM200/300/400" ++ select ARC if CPU_LITTLE_ENDIAN ++ select ARC32 if CPU_LITTLE_ENDIAN ++ select SNIPROM if CPU_BIG_ENDIAN ++ select ARCH_MAY_HAVE_PC_FDC ++ select BOOT_ELF32 ++ select CEVT_R4K ++ select CSRC_R4K ++ select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN ++ select DMA_NONCOHERENT ++ select GENERIC_ISA_DMA ++ select HW_HAS_EISA ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select I8253 ++ select I8259 ++ select ISA ++ select SWAP_IO_SPACE if CPU_BIG_ENDIAN ++ select SYS_HAS_CPU_R4X00 ++ select SYS_HAS_CPU_R5000 ++ select SYS_HAS_CPU_R10000 ++ select R5000_CPU_SCACHE ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ help ++ The SNI RM200/300/400 are MIPS-based machines manufactured by ++ Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid ++ Technology and now in turn merged with Fujitsu. Say Y here to ++ support this machine type. + -+struct ag71xx_ring { -+ struct ag71xx_buf *buf; -+ u8 *descs_cpu; -+ dma_addr_t descs_dma; -+ unsigned int desc_size; -+ unsigned int curr; -+ unsigned int dirty; -+ unsigned int size; -+}; ++config MACH_TX39XX ++ bool "Toshiba TX39 series based machines" + -+struct ag71xx_mdio { -+ struct mii_bus *mii_bus; -+ int mii_irq[PHY_MAX_ADDR]; -+ void __iomem *mdio_base; -+ struct ag71xx_mdio_platform_data *pdata; -+}; ++config MACH_TX49XX ++ bool "Toshiba TX49 series based machines" + -+struct ag71xx_int_stats { -+ unsigned long rx_pr; -+ unsigned long rx_be; -+ unsigned long rx_of; -+ unsigned long tx_ps; -+ unsigned long tx_be; -+ unsigned long tx_ur; -+ unsigned long total; -+}; ++config MIKROTIK_RB532 ++ bool "Mikrotik RB532 boards" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SWAP_IO_SPACE ++ select BOOT_RAW ++ select ARCH_REQUIRE_GPIOLIB ++ help ++ Support the Mikrotik(tm) RouterBoard 532 series, ++ based on the IDT RC32434 SoC. + -+struct ag71xx_napi_stats { -+ unsigned long napi_calls; -+ unsigned long rx_count; -+ unsigned long rx_packets; -+ unsigned long rx_packets_max; -+ unsigned long tx_count; -+ unsigned long tx_packets; -+ unsigned long tx_packets_max; ++config WR_PPMC ++ bool "Wind River PPMC board" ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select PCI_GT64XXX_PCI0 ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_HAS_CPU_MIPS64_R1 ++ select SYS_HAS_CPU_NEVADA ++ select SYS_HAS_CPU_RM7000 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ help ++ This enables support for the Wind River MIPS32 4KC PPMC evaluation ++ board, which is based on GT64120 bridge chip. + -+ unsigned long rx[AG71XX_NAPI_WEIGHT + 1]; -+ unsigned long tx[AG71XX_NAPI_WEIGHT + 1]; -+}; ++config CAVIUM_OCTEON_SIMULATOR ++ bool "Cavium Networks Octeon Simulator" ++ select CEVT_R4K ++ select 64BIT_PHYS_ADDR ++ select DMA_COHERENT ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ select SYS_HAS_CPU_CAVIUM_OCTEON ++ help ++ The Octeon simulator is software performance model of the Cavium ++ Octeon Processor. It supports simulating Octeon processors on x86 ++ hardware. + -+struct ag71xx_debug { -+ struct dentry *debugfs_dir; -+ struct dentry *debugfs_int_stats; -+ struct dentry *debugfs_napi_stats; ++config CAVIUM_OCTEON_REFERENCE_BOARD ++ bool "Cavium Networks Octeon reference board" ++ select CEVT_R4K ++ select 64BIT_PHYS_ADDR ++ select DMA_COHERENT ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_HIGHMEM ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_HAS_CPU_CAVIUM_OCTEON ++ select SWAP_IO_SPACE ++ select HW_HAS_PCI ++ select ARCH_SUPPORTS_MSI ++ select ZONE_DMA32 ++ select USB_ARCH_HAS_OHCI ++ select USB_ARCH_HAS_EHCI ++ help ++ This option supports all of the Octeon reference boards from Cavium ++ Networks. It builds a kernel that dynamically determines the Octeon ++ CPU type and supports all known board reference implementations. ++ Some of the supported boards are: ++ EBT3000 ++ EBH3000 ++ EBH3100 ++ Thunder ++ Kodama ++ Hikari ++ Say Y here for most Octeon reference boards. ++ ++endchoice ++ ++source "arch/mips/alchemy/Kconfig" ++source "arch/mips/ar71xx/Kconfig" ++source "arch/mips/ath79/Kconfig" ++source "arch/mips/bcm63xx/Kconfig" ++source "arch/mips/jazz/Kconfig" ++source "arch/mips/jz4740/Kconfig" ++source "arch/mips/lasat/Kconfig" ++source "arch/mips/pmc-sierra/Kconfig" ++source "arch/mips/powertv/Kconfig" ++source "arch/mips/sgi-ip27/Kconfig" ++source "arch/mips/sibyte/Kconfig" ++source "arch/mips/txx9/Kconfig" ++source "arch/mips/vr41xx/Kconfig" ++source "arch/mips/cavium-octeon/Kconfig" ++source "arch/mips/loongson/Kconfig" + -+ struct ag71xx_int_stats int_stats; -+ struct ag71xx_napi_stats napi_stats; -+}; ++endmenu + -+struct ag71xx { -+ void __iomem *mac_base; -+ void __iomem *mii_ctrl; ++config RWSEM_GENERIC_SPINLOCK ++ bool ++ default y + -+ spinlock_t lock; -+ struct platform_device *pdev; -+ struct net_device *dev; -+ struct napi_struct napi; -+ u32 msg_enable; ++config RWSEM_XCHGADD_ALGORITHM ++ bool + -+ struct ag71xx_ring rx_ring; -+ struct ag71xx_ring tx_ring; ++config ARCH_HAS_ILOG2_U32 ++ bool ++ default n + -+ struct mii_bus *mii_bus; -+ struct phy_device *phy_dev; ++config ARCH_HAS_ILOG2_U64 ++ bool ++ default n + -+ unsigned int link; -+ unsigned int speed; -+ int duplex; ++config ARCH_SUPPORTS_OPROFILE ++ bool ++ default y if !MIPS_MT_SMTC + -+ struct work_struct restart_work; -+ struct timer_list oom_timer; ++config GENERIC_FIND_NEXT_BIT ++ bool ++ default y + -+#ifdef CONFIG_AG71XX_DEBUG_FS -+ struct ag71xx_debug debug; -+#endif -+}; ++config GENERIC_FIND_BIT_LE ++ bool ++ default y + -+extern struct ethtool_ops ag71xx_ethtool_ops; -+void ag71xx_link_adjust(struct ag71xx *ag); ++config GENERIC_HWEIGHT ++ bool ++ default y + -+int ag71xx_mdio_driver_init(void) __init; -+void ag71xx_mdio_driver_exit(void); ++config GENERIC_CALIBRATE_DELAY ++ bool ++ default y + -+int ag71xx_phy_connect(struct ag71xx *ag); -+void ag71xx_phy_disconnect(struct ag71xx *ag); -+void ag71xx_phy_start(struct ag71xx *ag); -+void ag71xx_phy_stop(struct ag71xx *ag); ++config GENERIC_CLOCKEVENTS ++ bool ++ default y + -+static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag) -+{ -+ return ag->pdev->dev.platform_data; -+} ++config GENERIC_CMOS_UPDATE ++ bool ++ default y + -+static inline int ag71xx_desc_empty(struct ag71xx_desc *desc) -+{ -+ return ((desc->ctrl & DESC_EMPTY) != 0); -+} ++config SCHED_OMIT_FRAME_POINTER ++ bool ++ default y + -+static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc) -+{ -+ return (desc->ctrl & DESC_PKTLEN_M); -+} ++# ++# Select some configuration options automatically based on user selections. ++# ++config ARC ++ bool + -+/* Register offsets */ -+#define AG71XX_REG_MAC_CFG1 0x0000 -+#define AG71XX_REG_MAC_CFG2 0x0004 -+#define AG71XX_REG_MAC_IPG 0x0008 -+#define AG71XX_REG_MAC_HDX 0x000c -+#define AG71XX_REG_MAC_MFL 0x0010 -+#define AG71XX_REG_MII_CFG 0x0020 -+#define AG71XX_REG_MII_CMD 0x0024 -+#define AG71XX_REG_MII_ADDR 0x0028 -+#define AG71XX_REG_MII_CTRL 0x002c -+#define AG71XX_REG_MII_STATUS 0x0030 -+#define AG71XX_REG_MII_IND 0x0034 -+#define AG71XX_REG_MAC_IFCTL 0x0038 -+#define AG71XX_REG_MAC_ADDR1 0x0040 -+#define AG71XX_REG_MAC_ADDR2 0x0044 -+#define AG71XX_REG_FIFO_CFG0 0x0048 -+#define AG71XX_REG_FIFO_CFG1 0x004c -+#define AG71XX_REG_FIFO_CFG2 0x0050 -+#define AG71XX_REG_FIFO_CFG3 0x0054 -+#define AG71XX_REG_FIFO_CFG4 0x0058 -+#define AG71XX_REG_FIFO_CFG5 0x005c -+#define AG71XX_REG_FIFO_RAM0 0x0060 -+#define AG71XX_REG_FIFO_RAM1 0x0064 -+#define AG71XX_REG_FIFO_RAM2 0x0068 -+#define AG71XX_REG_FIFO_RAM3 0x006c -+#define AG71XX_REG_FIFO_RAM4 0x0070 -+#define AG71XX_REG_FIFO_RAM5 0x0074 -+#define AG71XX_REG_FIFO_RAM6 0x0078 -+#define AG71XX_REG_FIFO_RAM7 0x007c ++config ARCH_MAY_HAVE_PC_FDC ++ bool + -+#define AG71XX_REG_TX_CTRL 0x0180 -+#define AG71XX_REG_TX_DESC 0x0184 -+#define AG71XX_REG_TX_STATUS 0x0188 -+#define AG71XX_REG_RX_CTRL 0x018c -+#define AG71XX_REG_RX_DESC 0x0190 -+#define AG71XX_REG_RX_STATUS 0x0194 -+#define AG71XX_REG_INT_ENABLE 0x0198 -+#define AG71XX_REG_INT_STATUS 0x019c ++config BOOT_RAW ++ bool + -+#define MAC_CFG1_TXE BIT(0) /* Tx Enable */ -+#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */ -+#define MAC_CFG1_RXE BIT(2) /* Rx Enable */ -+#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */ -+#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */ -+#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */ -+#define MAC_CFG1_LB BIT(8) /* Loopback mode */ -+#define MAC_CFG1_SR BIT(31) /* Soft Reset */ ++config CEVT_BCM1480 ++ bool + -+#define MAC_CFG2_FDX BIT(0) -+#define MAC_CFG2_CRC_EN BIT(1) -+#define MAC_CFG2_PAD_CRC_EN BIT(2) -+#define MAC_CFG2_LEN_CHECK BIT(4) -+#define MAC_CFG2_HUGE_FRAME_EN BIT(5) -+#define MAC_CFG2_IF_1000 BIT(9) -+#define MAC_CFG2_IF_10_100 BIT(8) ++config CEVT_DS1287 ++ bool + -+#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */ -+#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */ -+#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */ -+#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */ -+#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */ -+#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \ -+ | FIFO_CFG0_TXS | FIFO_CFG0_TXF) ++config CEVT_GT641XX ++ bool + -+#define FIFO_CFG0_ENABLE_SHIFT 8 ++config CEVT_R4K_LIB ++ bool + -+#define FIFO_CFG4_DE BIT(0) /* Drop Event */ -+#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */ -+#define FIFO_CFG4_FC BIT(2) /* False Carrier */ -+#define FIFO_CFG4_CE BIT(3) /* Code Error */ -+#define FIFO_CFG4_CR BIT(4) /* CRC error */ -+#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */ -+#define FIFO_CFG4_LO BIT(6) /* Length out of range */ -+#define FIFO_CFG4_OK BIT(7) /* Packet is OK */ -+#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */ -+#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */ -+#define FIFO_CFG4_DR BIT(10) /* Dribble */ -+#define FIFO_CFG4_LE BIT(11) /* Long Event */ -+#define FIFO_CFG4_CF BIT(12) /* Control Frame */ -+#define FIFO_CFG4_PF BIT(13) /* Pause Frame */ -+#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */ -+#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */ -+#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */ -+#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */ ++config CEVT_R4K ++ select CEVT_R4K_LIB ++ bool + -+#define FIFO_CFG5_DE BIT(0) /* Drop Event */ -+#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */ -+#define FIFO_CFG5_FC BIT(2) /* False Carrier */ -+#define FIFO_CFG5_CE BIT(3) /* Code Error */ -+#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */ -+#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */ -+#define FIFO_CFG5_OK BIT(6) /* Packet is OK */ -+#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */ -+#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */ -+#define FIFO_CFG5_DR BIT(9) /* Dribble */ -+#define FIFO_CFG5_CF BIT(10) /* Control Frame */ -+#define FIFO_CFG5_PF BIT(11) /* Pause Frame */ -+#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */ -+#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */ -+#define FIFO_CFG5_LE BIT(14) /* Long Event */ -+#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */ -+#define FIFO_CFG5_16 BIT(16) /* unknown */ -+#define FIFO_CFG5_17 BIT(17) /* unknown */ -+#define FIFO_CFG5_SF BIT(18) /* Short Frame */ -+#define FIFO_CFG5_BM BIT(19) /* Byte Mode */ ++config CEVT_SB1250 ++ bool + -+#define AG71XX_INT_TX_PS BIT(0) -+#define AG71XX_INT_TX_UR BIT(1) -+#define AG71XX_INT_TX_BE BIT(3) -+#define AG71XX_INT_RX_PR BIT(4) -+#define AG71XX_INT_RX_OF BIT(6) -+#define AG71XX_INT_RX_BE BIT(7) ++config CEVT_TXX9 ++ bool + -+#define MAC_IFCTL_SPEED BIT(16) ++config CSRC_BCM1480 ++ bool + -+#define MII_CFG_CLK_DIV_4 0 -+#define MII_CFG_CLK_DIV_6 2 -+#define MII_CFG_CLK_DIV_8 3 -+#define MII_CFG_CLK_DIV_10 4 -+#define MII_CFG_CLK_DIV_14 5 -+#define MII_CFG_CLK_DIV_20 6 -+#define MII_CFG_CLK_DIV_28 7 -+#define MII_CFG_RESET BIT(31) ++config CSRC_IOASIC ++ bool + -+#define MII_CMD_WRITE 0x0 -+#define MII_CMD_READ 0x1 -+#define MII_ADDR_SHIFT 8 -+#define MII_IND_BUSY BIT(0) -+#define MII_IND_INVALID BIT(2) ++config CSRC_POWERTV ++ bool + -+#define TX_CTRL_TXE BIT(0) /* Tx Enable */ ++config CSRC_R4K_LIB ++ bool + -+#define TX_STATUS_PS BIT(0) /* Packet Sent */ -+#define TX_STATUS_UR BIT(1) /* Tx Underrun */ -+#define TX_STATUS_BE BIT(3) /* Bus Error */ ++config CSRC_R4K ++ select CSRC_R4K_LIB ++ bool + -+#define RX_CTRL_RXE BIT(0) /* Rx Enable */ ++config CSRC_SB1250 ++ bool + -+#define RX_STATUS_PR BIT(0) /* Packet Received */ -+#define RX_STATUS_OF BIT(2) /* Rx Overflow */ -+#define RX_STATUS_BE BIT(3) /* Bus Error */ ++config GPIO_TXX9 ++ select GENERIC_GPIO ++ select ARCH_REQUIRE_GPIOLIB ++ bool + -+#define MII_CTRL_IF_MASK 3 -+#define MII_CTRL_SPEED_SHIFT 4 -+#define MII_CTRL_SPEED_MASK 3 -+#define MII_CTRL_SPEED_10 0 -+#define MII_CTRL_SPEED_100 1 -+#define MII_CTRL_SPEED_1000 2 ++config CFE ++ bool + -+static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg) -+{ -+ switch (reg) { -+ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL: -+ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_INT_STATUS: -+ break; ++config ARCH_DMA_ADDR_T_64BIT ++ def_bool (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT + -+ default: -+ BUG(); -+ } -+} ++config DMA_COHERENT ++ bool + -+static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value) -+{ -+ ag71xx_check_reg_offset(ag, reg); ++config DMA_NONCOHERENT ++ bool ++ select NEED_DMA_MAP_STATE + -+ __raw_writel(value, ag->mac_base + reg); -+ /* flush write */ -+ (void) __raw_readl(ag->mac_base + reg); -+} ++config NEED_DMA_MAP_STATE ++ bool + -+static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg) -+{ -+ ag71xx_check_reg_offset(ag, reg); ++config SYS_HAS_EARLY_PRINTK ++ bool + -+ return __raw_readl(ag->mac_base + reg); -+} ++config HOTPLUG_CPU ++ bool "Support for hot-pluggable CPUs" ++ depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU ++ help ++ Say Y here to allow turning CPUs off and on. CPUs can be ++ controlled through /sys/devices/system/cpu. ++ (Note: power management support will enable this option ++ automatically on SMP systems. ) ++ Say N if you want to disable CPU hotplug. + -+static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask) -+{ -+ void __iomem *r; ++config SYS_SUPPORTS_HOTPLUG_CPU ++ bool + -+ ag71xx_check_reg_offset(ag, reg); ++config I8259 ++ bool + -+ r = ag->mac_base + reg; -+ __raw_writel(__raw_readl(r) | mask, r); -+ /* flush write */ -+ (void)__raw_readl(r); -+} ++config MIPS_BONITO64 ++ bool + -+static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask) -+{ -+ void __iomem *r; ++config MIPS_MSC ++ bool + -+ ag71xx_check_reg_offset(ag, reg); ++config MIPS_NILE4 ++ bool + -+ r = ag->mac_base + reg; -+ __raw_writel(__raw_readl(r) & ~mask, r); -+ /* flush write */ -+ (void) __raw_readl(r); -+} ++config MIPS_DISABLE_OBSOLETE_IDE ++ bool + -+static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints) -+{ -+ ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints); -+} ++config SYNC_R4K ++ bool + -+static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints) -+{ -+ ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints); -+} ++config MIPS_MACHINE ++ def_bool n + -+static inline void ag71xx_mii_ctrl_wr(struct ag71xx *ag, u32 value) -+{ -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++config NO_IOPORT ++ def_bool n + -+ if (pdata->is_ar724x) -+ return; ++config GENERIC_ISA_DMA ++ bool ++ select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n ++ select ISA_DMA_API + -+ __raw_writel(value, ag->mii_ctrl); ++config GENERIC_ISA_DMA_SUPPORT_BROKEN ++ bool ++ select GENERIC_ISA_DMA + -+ /* flush write */ -+ __raw_readl(ag->mii_ctrl); -+} ++config ISA_DMA_API ++ bool + -+static inline u32 ag71xx_mii_ctrl_rr(struct ag71xx *ag) -+{ -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++config GENERIC_GPIO ++ bool + -+ if (pdata->is_ar724x) -+ return 0xffffffff; ++# ++# Endianess selection. Sufficiently obscure so many users don't know what to ++# answer,so we try hard to limit the available choices. Also the use of a ++# choice statement should be more obvious to the user. ++# ++choice ++ prompt "Endianess selection" ++ help ++ Some MIPS machines can be configured for either little or big endian ++ byte order. These modes require different kernels and a different ++ Linux distribution. In general there is one preferred byteorder for a ++ particular system but some systems are just as commonly used in the ++ one or the other endianness. ++ ++config CPU_BIG_ENDIAN ++ bool "Big endian" ++ depends on SYS_SUPPORTS_BIG_ENDIAN ++ ++config CPU_LITTLE_ENDIAN ++ bool "Little endian" ++ depends on SYS_SUPPORTS_LITTLE_ENDIAN ++ help + -+ return __raw_readl(ag->mii_ctrl); -+} ++endchoice + -+static void inline ag71xx_mii_ctrl_set_if(struct ag71xx *ag, -+ unsigned int mii_if) -+{ -+ u32 t; ++config EXPORT_UASM ++ bool + -+ t = ag71xx_mii_ctrl_rr(ag); -+ t &= ~(MII_CTRL_IF_MASK); -+ t |= (mii_if & MII_CTRL_IF_MASK); -+ ag71xx_mii_ctrl_wr(ag, t); -+} ++config SYS_SUPPORTS_APM_EMULATION ++ bool + -+static void inline ag71xx_mii_ctrl_set_speed(struct ag71xx *ag, -+ unsigned int speed) -+{ -+ u32 t; ++config SYS_SUPPORTS_BIG_ENDIAN ++ bool + -+ t = ag71xx_mii_ctrl_rr(ag); -+ t &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT); -+ t |= (speed & MII_CTRL_SPEED_MASK) << MII_CTRL_SPEED_SHIFT; -+ ag71xx_mii_ctrl_wr(ag, t); -+} ++config SYS_SUPPORTS_LITTLE_ENDIAN ++ bool + -+#ifdef CONFIG_AG71XX_AR8216_SUPPORT -+void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb); -+int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, -+ int pktlen); -+static inline int ag71xx_has_ar8216(struct ag71xx *ag) -+{ -+ return ag71xx_get_pdata(ag)->has_ar8216; -+} -+#else -+static inline void ag71xx_add_ar8216_header(struct ag71xx *ag, -+ struct sk_buff *skb) -+{ -+} ++config SYS_SUPPORTS_HUGETLBFS ++ bool ++ depends on CPU_SUPPORTS_HUGEPAGES && 64BIT ++ default y + -+static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag, -+ struct sk_buff *skb, -+ int pktlen) -+{ -+ return 0; -+} -+static inline int ag71xx_has_ar8216(struct ag71xx *ag) -+{ -+ return 0; -+} -+#endif ++config IRQ_CPU ++ bool + -+#ifdef CONFIG_AG71XX_DEBUG_FS -+int ag71xx_debugfs_root_init(void); -+void ag71xx_debugfs_root_exit(void); -+int ag71xx_debugfs_init(struct ag71xx *ag); -+void ag71xx_debugfs_exit(struct ag71xx *ag); -+void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status); -+void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx); -+#else -+static inline int ag71xx_debugfs_root_init(void) { return 0; } -+static inline void ag71xx_debugfs_root_exit(void) {} -+static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; } -+static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {} -+static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, -+ u32 status) {} -+static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, -+ int rx, int tx) {} -+#endif /* CONFIG_AG71XX_DEBUG_FS */ ++config IRQ_CPU_RM7K ++ bool + -+#endif /* _AG71XX_H */ -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar8216.c linux-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c ---- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar8216.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,44 @@ -+/* -+ * Atheros AR71xx built-in ethernet mac driver -+ * Special support for the Atheros ar8216 switch chip -+ * -+ * Copyright (C) 2009-2010 Gabor Juhos -+ * -+ * Based on Atheros' AG7100 driver -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++config IRQ_CPU_RM9K ++ bool + -+#include "ag71xx.h" ++config IRQ_MSP_SLP ++ bool + -+#define AR8216_PACKET_TYPE_MASK 0xf -+#define AR8216_PACKET_TYPE_NORMAL 0 ++config IRQ_MSP_CIC ++ bool + -+#define AR8216_HEADER_LEN 2 ++config IRQ_TXX9 ++ bool + -+void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb) -+{ -+ skb_push(skb, AR8216_HEADER_LEN); -+ skb->data[0] = 0x10; -+ skb->data[1] = 0x80; -+} ++config IRQ_GT641XX ++ bool + -+int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, -+ int pktlen) -+{ -+ u8 type; ++config IRQ_GIC ++ bool + -+ type = skb->data[1] & AR8216_PACKET_TYPE_MASK; -+ switch (type) { -+ case AR8216_PACKET_TYPE_NORMAL: -+ break; ++config MIPS_BOARDS_GEN ++ bool + -+ default: -+ return -EINVAL; -+ } ++config PCI_GT64XXX_PCI0 ++ bool + -+ skb_pull(skb, AR8216_HEADER_LEN); -+ return 0; -+} -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_debugfs.c linux-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c ---- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_debugfs.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,197 @@ -+/* -+ * Atheros AR71xx built-in ethernet mac driver -+ * -+ * Copyright (C) 2008-2010 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Based on Atheros' AG7100 driver -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++config NO_EXCEPT_FILL ++ bool + -+#include ++config MIPS_RM9122 ++ bool ++ select SERIAL_RM9000 + -+#include "ag71xx.h" ++config SOC_EMMA2RH ++ bool ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_R5500 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN + -+static struct dentry *ag71xx_debugfs_root; ++config SOC_PNX833X ++ bool ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select DMA_NONCOHERENT ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select GENERIC_GPIO ++ select CPU_MIPSR2_IRQ_VI + -+static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file) -+{ -+ file->private_data = inode->i_private; -+ return 0; -+} ++config SOC_PNX8335 ++ bool ++ select SOC_PNX833X + -+void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status) -+{ -+ if (status) -+ ag->debug.int_stats.total++; -+ if (status & AG71XX_INT_TX_PS) -+ ag->debug.int_stats.tx_ps++; -+ if (status & AG71XX_INT_TX_UR) -+ ag->debug.int_stats.tx_ur++; -+ if (status & AG71XX_INT_TX_BE) -+ ag->debug.int_stats.tx_be++; -+ if (status & AG71XX_INT_RX_PR) -+ ag->debug.int_stats.rx_pr++; -+ if (status & AG71XX_INT_RX_OF) -+ ag->debug.int_stats.rx_of++; -+ if (status & AG71XX_INT_RX_BE) -+ ag->debug.int_stats.rx_be++; -+} ++config PNX8550 ++ bool ++ select SOC_PNX8550 + -+static ssize_t read_file_int_stats(struct file *file, char __user *user_buf, -+ size_t count, loff_t *ppos) -+{ -+#define PR_INT_STAT(_label, _field) \ -+ len += snprintf(buf + len, sizeof(buf) - len, \ -+ "%20s: %10lu\n", _label, ag->debug.int_stats._field); ++config SOC_PNX8550 ++ bool ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select GENERIC_GPIO + -+ struct ag71xx *ag = file->private_data; -+ char buf[256]; -+ unsigned int len = 0; ++config SWAP_IO_SPACE ++ bool + -+ PR_INT_STAT("TX Packet Sent", tx_ps); -+ PR_INT_STAT("TX Underrun", tx_ur); -+ PR_INT_STAT("TX Bus Error", tx_be); -+ PR_INT_STAT("RX Packet Received", rx_pr); -+ PR_INT_STAT("RX Overflow", rx_of); -+ PR_INT_STAT("RX Bus Error", rx_be); -+ len += snprintf(buf + len, sizeof(buf) - len, "\n"); -+ PR_INT_STAT("Total", total); ++config SERIAL_RM9000 ++ bool + -+ return simple_read_from_buffer(user_buf, count, ppos, buf, len); -+#undef PR_INT_STAT -+} ++config SGI_HAS_INDYDOG ++ bool + -+static const struct file_operations ag71xx_fops_int_stats = { -+ .open = ag71xx_debugfs_generic_open, -+ .read = read_file_int_stats, -+ .owner = THIS_MODULE -+}; ++config SGI_HAS_HAL2 ++ bool + -+void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx) -+{ -+ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; ++config SGI_HAS_SEEQ ++ bool + -+ if (rx) { -+ stats->rx_count++; -+ stats->rx_packets += rx; -+ if (rx <= AG71XX_NAPI_WEIGHT) -+ stats->rx[rx]++; -+ if (rx > stats->rx_packets_max) -+ stats->rx_packets_max = rx; -+ } ++config SGI_HAS_WD93 ++ bool + -+ if (tx) { -+ stats->tx_count++; -+ stats->tx_packets += tx; -+ if (tx <= AG71XX_NAPI_WEIGHT) -+ stats->tx[tx]++; -+ if (tx > stats->tx_packets_max) -+ stats->tx_packets_max = tx; -+ } -+} ++config SGI_HAS_ZILOG ++ bool + -+static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf, -+ size_t count, loff_t *ppos) -+{ -+ struct ag71xx *ag = file->private_data; -+ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; -+ char buf[2048]; -+ unsigned int len = 0; -+ unsigned long rx_avg = 0; -+ unsigned long tx_avg = 0; -+ int i; ++config SGI_HAS_I8042 ++ bool + -+ if (stats->rx_count) -+ rx_avg = stats->rx_packets / stats->rx_count; ++config DEFAULT_SGI_PARTITION ++ bool + -+ if (stats->tx_count) -+ tx_avg = stats->tx_packets / stats->tx_count; ++config ARC32 ++ bool + -+ len += snprintf(buf + len, sizeof(buf) - len, "%3s %10s %10s\n", -+ "len", "rx", "tx"); ++config SNIPROM ++ bool + -+ for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++) -+ len += snprintf(buf + len, sizeof(buf) - len, -+ "%3d: %10lu %10lu\n", -+ i, stats->rx[i], stats->tx[i]); ++config BOOT_ELF32 ++ bool + -+ len += snprintf(buf + len, sizeof(buf) - len, "\n"); ++config MIPS_L1_CACHE_SHIFT ++ int ++ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL ++ default "6" if MIPS_CPU_SCACHE ++ default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON ++ default "5" + -+ len += snprintf(buf + len, sizeof(buf) - len, "%3s: %10lu %10lu\n", -+ "sum", stats->rx_count, stats->tx_count); -+ len += snprintf(buf + len, sizeof(buf) - len, "%3s: %10lu %10lu\n", -+ "avg", rx_avg, tx_avg); -+ len += snprintf(buf + len, sizeof(buf) - len, "%3s: %10lu %10lu\n", -+ "max", stats->rx_packets_max, stats->tx_packets_max); -+ len += snprintf(buf + len, sizeof(buf) - len, "%3s: %10lu %10lu\n", -+ "pkt", stats->rx_packets, stats->tx_packets); ++config HAVE_STD_PC_SERIAL_PORT ++ bool + -+ return simple_read_from_buffer(user_buf, count, ppos, buf, len); -+} ++config ARC_CONSOLE ++ bool "ARC console support" ++ depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN) + -+static const struct file_operations ag71xx_fops_napi_stats = { -+ .open = ag71xx_debugfs_generic_open, -+ .read = read_file_napi_stats, -+ .owner = THIS_MODULE -+}; ++config ARC_MEMORY ++ bool ++ depends on MACH_JAZZ || SNI_RM || SGI_IP32 ++ default y + -+void ag71xx_debugfs_exit(struct ag71xx *ag) -+{ -+ debugfs_remove(ag->debug.debugfs_napi_stats); -+ debugfs_remove(ag->debug.debugfs_int_stats); -+ debugfs_remove(ag->debug.debugfs_dir); -+} ++config ARC_PROMLIB ++ bool ++ depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32 ++ default y + -+int ag71xx_debugfs_init(struct ag71xx *ag) -+{ -+ ag->debug.debugfs_dir = debugfs_create_dir(ag->dev->name, -+ ag71xx_debugfs_root); -+ if (!ag->debug.debugfs_dir) -+ goto err; ++config ARC64 ++ bool + -+ ag->debug.debugfs_int_stats = -+ debugfs_create_file("int_stats", -+ S_IRUGO, -+ ag->debug.debugfs_dir, -+ ag, -+ &ag71xx_fops_int_stats); -+ if (!ag->debug.debugfs_int_stats) -+ goto err; ++config BOOT_ELF64 ++ bool + -+ ag->debug.debugfs_napi_stats = -+ debugfs_create_file("napi_stats", -+ S_IRUGO, -+ ag->debug.debugfs_dir, -+ ag, -+ &ag71xx_fops_napi_stats); -+ if (!ag->debug.debugfs_napi_stats) -+ goto err; ++menu "CPU selection" + -+ return 0; ++choice ++ prompt "CPU type" ++ default CPU_R4X00 + -+ err: -+ ag71xx_debugfs_exit(ag); -+ return -ENOMEM; -+} ++config CPU_LOONGSON2E ++ bool "Loongson 2E" ++ depends on SYS_HAS_CPU_LOONGSON2E ++ select CPU_LOONGSON2 ++ help ++ The Loongson 2E processor implements the MIPS III instruction set ++ with many extensions. + -+int ag71xx_debugfs_root_init(void) -+{ -+ if (ag71xx_debugfs_root) -+ return -EBUSY; ++ It has an internal FPGA northbridge, which is compatible to ++ bonito64. + -+ ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); -+ if (!ag71xx_debugfs_root) -+ return -ENOENT; ++config CPU_LOONGSON2F ++ bool "Loongson 2F" ++ depends on SYS_HAS_CPU_LOONGSON2F ++ select CPU_LOONGSON2 ++ select GENERIC_GPIO ++ select ARCH_REQUIRE_GPIOLIB ++ help ++ The Loongson 2F processor implements the MIPS III instruction set ++ with many extensions. ++ ++ Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller ++ have a similar programming interface with FPGA northbridge used in ++ Loongson2E. ++ ++config CPU_MIPS32_R1 ++ bool "MIPS32 Release 1" ++ depends on SYS_HAS_CPU_MIPS32_R1 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ help ++ Choose this option to build a kernel for release 1 or later of the ++ MIPS32 architecture. Most modern embedded systems with a 32-bit ++ MIPS processor are based on a MIPS32 processor. If you know the ++ specific type of processor in your system, choose those that one ++ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. ++ Release 2 of the MIPS32 architecture is available since several ++ years so chances are you even have a MIPS32 Release 2 processor ++ in which case you should choose CPU_MIPS32_R2 instead for better ++ performance. ++ ++config CPU_MIPS32_R2 ++ bool "MIPS32 Release 2" ++ depends on SYS_HAS_CPU_MIPS32_R2 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ help ++ Choose this option to build a kernel for release 2 or later of the ++ MIPS32 architecture. Most modern embedded systems with a 32-bit ++ MIPS processor are based on a MIPS32 processor. If you know the ++ specific type of processor in your system, choose those that one ++ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. ++ ++config CPU_MIPS64_R1 ++ bool "MIPS64 Release 1" ++ depends on SYS_HAS_CPU_MIPS64_R1 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ Choose this option to build a kernel for release 1 or later of the ++ MIPS64 architecture. Many modern embedded systems with a 64-bit ++ MIPS processor are based on a MIPS64 processor. If you know the ++ specific type of processor in your system, choose those that one ++ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. ++ Release 2 of the MIPS64 architecture is available since several ++ years so chances are you even have a MIPS64 Release 2 processor ++ in which case you should choose CPU_MIPS64_R2 instead for better ++ performance. ++ ++config CPU_MIPS64_R2 ++ bool "MIPS64 Release 2" ++ depends on SYS_HAS_CPU_MIPS64_R2 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ Choose this option to build a kernel for release 2 or later of the ++ MIPS64 architecture. Many modern embedded systems with a 64-bit ++ MIPS processor are based on a MIPS64 processor. If you know the ++ specific type of processor in your system, choose those that one ++ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. ++ ++config CPU_R3000 ++ bool "R3000" ++ depends on SYS_HAS_CPU_R3000 ++ select CPU_HAS_WB ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ help ++ Please make sure to pick the right CPU type. Linux/MIPS is not ++ designed to be generic, i.e. Kernels compiled for R3000 CPUs will ++ *not* work on R4000 machines and vice versa. However, since most ++ of the supported machines have an R4000 (or similar) CPU, R4x00 ++ might be a safe bet. If the resulting kernel does not work, ++ try to recompile with R3000. ++ ++config CPU_TX39XX ++ bool "R39XX" ++ depends on SYS_HAS_CPU_TX39XX ++ select CPU_SUPPORTS_32BIT_KERNEL ++ ++config CPU_VR41XX ++ bool "R41xx" ++ depends on SYS_HAS_CPU_VR41XX ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ help ++ The options selects support for the NEC VR4100 series of processors. ++ Only choose this option if you have one of these processors as a ++ kernel built with this option will not run on any other type of ++ processor or vice versa. ++ ++config CPU_R4300 ++ bool "R4300" ++ depends on SYS_HAS_CPU_R4300 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ help ++ MIPS Technologies R4300-series processors. + -+ return 0; -+} ++config CPU_R4X00 ++ bool "R4x00" ++ depends on SYS_HAS_CPU_R4X00 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ help ++ MIPS Technologies R4000-series processors other than 4300, including ++ the R4000, R4400, R4600, and 4700. ++ ++config CPU_TX49XX ++ bool "R49XX" ++ depends on SYS_HAS_CPU_TX49XX ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ ++config CPU_R5000 ++ bool "R5000" ++ depends on SYS_HAS_CPU_R5000 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ help ++ MIPS Technologies R5000-series processors other than the Nevada. ++ ++config CPU_R5432 ++ bool "R5432" ++ depends on SYS_HAS_CPU_R5432 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ ++config CPU_R5500 ++ bool "R5500" ++ depends on SYS_HAS_CPU_R5500 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV ++ instruction set. ++ ++config CPU_R6000 ++ bool "R6000" ++ depends on EXPERIMENTAL ++ depends on SYS_HAS_CPU_R6000 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ help ++ MIPS Technologies R6000 and R6000A series processors. Note these ++ processors are extremely rare and the support for them is incomplete. ++ ++config CPU_NEVADA ++ bool "RM52xx" ++ depends on SYS_HAS_CPU_NEVADA ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ help ++ QED / PMC-Sierra RM52xx-series ("Nevada") processors. ++ ++config CPU_R8000 ++ bool "R8000" ++ depends on EXPERIMENTAL ++ depends on SYS_HAS_CPU_R8000 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_64BIT_KERNEL ++ help ++ MIPS Technologies R8000 processors. Note these processors are ++ uncommon and the support for them is incomplete. ++ ++config CPU_R10000 ++ bool "R10000" ++ depends on SYS_HAS_CPU_R10000 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ help ++ MIPS Technologies R10000-series processors. ++ ++config CPU_RM7000 ++ bool "RM7000" ++ depends on SYS_HAS_CPU_RM7000 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ ++config CPU_RM9000 ++ bool "RM9000" ++ depends on SYS_HAS_CPU_RM9000 ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select WEAK_ORDERING ++ ++config CPU_SB1 ++ bool "SB1" ++ depends on SYS_HAS_CPU_SB1 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select WEAK_ORDERING ++ ++config CPU_CAVIUM_OCTEON ++ bool "Cavium Octeon processor" ++ depends on SYS_HAS_CPU_CAVIUM_OCTEON ++ select CPU_HAS_PREFETCH ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select SYS_SUPPORTS_SMP ++ select NR_CPUS_DEFAULT_16 ++ select WEAK_ORDERING ++ select CPU_SUPPORTS_HIGHMEM ++ select CPU_SUPPORTS_HUGEPAGES ++ help ++ The Cavium Octeon processor is a highly integrated chip containing ++ many ethernet hardware widgets for networking tasks. The processor ++ can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets. ++ Full details can be found at http://www.caviumnetworks.com. ++ ++config CPU_BMIPS3300 ++ bool "BMIPS3300" ++ depends on SYS_HAS_CPU_BMIPS3300 ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select WEAK_ORDERING ++ help ++ Broadcom BMIPS3300 processors. + -+void ag71xx_debugfs_root_exit(void) -+{ -+ debugfs_remove(ag71xx_debugfs_root); -+ ag71xx_debugfs_root = NULL; -+} -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ethtool.c linux-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c ---- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ethtool.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,71 @@ -+/* -+ * Atheros AR71xx built-in ethernet mac driver -+ * -+ * Copyright (C) 2008-2010 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Based on Atheros' AG7100 driver -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++config CPU_BMIPS4350 ++ bool "BMIPS4350" ++ depends on SYS_HAS_CPU_BMIPS4350 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ select WEAK_ORDERING ++ help ++ Broadcom BMIPS4350 ("VIPER") processors. + -+#include "ag71xx.h" ++config CPU_BMIPS4380 ++ bool "BMIPS4380" ++ depends on SYS_HAS_CPU_BMIPS4380 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ select WEAK_ORDERING ++ help ++ Broadcom BMIPS4380 processors. + -+static int ag71xx_ethtool_get_settings(struct net_device *dev, -+ struct ethtool_cmd *cmd) -+{ -+ struct ag71xx *ag = netdev_priv(dev); -+ struct phy_device *phydev = ag->phy_dev; ++config CPU_BMIPS5000 ++ bool "BMIPS5000" ++ depends on SYS_HAS_CPU_BMIPS5000 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ select WEAK_ORDERING ++ help ++ Broadcom BMIPS5000 processors. + -+ if (!phydev) -+ return -ENODEV; ++endchoice + -+ return phy_ethtool_gset(phydev, cmd); -+} ++if CPU_LOONGSON2F ++config CPU_NOP_WORKAROUNDS ++ bool + -+static int ag71xx_ethtool_set_settings(struct net_device *dev, -+ struct ethtool_cmd *cmd) -+{ -+ struct ag71xx *ag = netdev_priv(dev); -+ struct phy_device *phydev = ag->phy_dev; ++config CPU_JUMP_WORKAROUNDS ++ bool + -+ if (!phydev) -+ return -ENODEV; ++config CPU_LOONGSON2F_WORKAROUNDS ++ bool "Loongson 2F Workarounds" ++ default y ++ select CPU_NOP_WORKAROUNDS ++ select CPU_JUMP_WORKAROUNDS ++ help ++ Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which ++ require workarounds. Without workarounds the system may hang ++ unexpectedly. For more information please refer to the gas ++ -mfix-loongson2f-nop and -mfix-loongson2f-jump options. + -+ return phy_ethtool_sset(phydev, cmd); -+} ++ Loongson 2F03 and later have fixed these issues and no workarounds ++ are needed. The workarounds have no significant side effect on them ++ but may decrease the performance of the system so this option should ++ be disabled unless the kernel is intended to be run on 2F01 or 2F02 ++ systems. + -+static void ag71xx_ethtool_get_drvinfo(struct net_device *dev, -+ struct ethtool_drvinfo *info) -+{ -+ struct ag71xx *ag = netdev_priv(dev); ++ If unsure, please say Y. ++endif # CPU_LOONGSON2F + -+ strcpy(info->driver, ag->pdev->dev.driver->name); -+ strcpy(info->version, AG71XX_DRV_VERSION); -+ strcpy(info->bus_info, dev_name(&ag->pdev->dev)); -+} ++config SYS_SUPPORTS_ZBOOT ++ bool ++ select HAVE_KERNEL_GZIP ++ select HAVE_KERNEL_BZIP2 ++ select HAVE_KERNEL_LZMA ++ select HAVE_KERNEL_LZO + -+static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev) -+{ -+ struct ag71xx *ag = netdev_priv(dev); ++config SYS_SUPPORTS_ZBOOT_UART16550 ++ bool ++ select SYS_SUPPORTS_ZBOOT + -+ return ag->msg_enable; -+} ++config CPU_LOONGSON2 ++ bool ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select CPU_SUPPORTS_64BIT_KERNEL ++ select CPU_SUPPORTS_HIGHMEM + -+static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level) -+{ -+ struct ag71xx *ag = netdev_priv(dev); ++config SYS_HAS_CPU_LOONGSON2E ++ bool + -+ ag->msg_enable = msg_level; -+} ++config SYS_HAS_CPU_LOONGSON2F ++ bool ++ select CPU_SUPPORTS_CPUFREQ ++ select CPU_SUPPORTS_ADDRWINCFG if 64BIT ++ select CPU_SUPPORTS_UNCACHED_ACCELERATED + -+struct ethtool_ops ag71xx_ethtool_ops = { -+ .set_settings = ag71xx_ethtool_set_settings, -+ .get_settings = ag71xx_ethtool_get_settings, -+ .get_drvinfo = ag71xx_ethtool_get_drvinfo, -+ .get_msglevel = ag71xx_ethtool_get_msglevel, -+ .set_msglevel = ag71xx_ethtool_set_msglevel, -+ .get_link = ethtool_op_get_link, -+}; -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_main.c linux-2.6.39/drivers/net/ag71xx/ag71xx_main.c ---- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_main.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_main.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,1184 @@ -+/* -+ * Atheros AR71xx built-in ethernet mac driver -+ * -+ * Copyright (C) 2008-2010 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Based on Atheros' AG7100 driver -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++config SYS_HAS_CPU_MIPS32_R1 ++ bool + -+#include "ag71xx.h" ++config SYS_HAS_CPU_MIPS32_R2 ++ bool + -+#define AG71XX_DEFAULT_MSG_ENABLE \ -+ ( NETIF_MSG_DRV \ -+ | NETIF_MSG_PROBE \ -+ | NETIF_MSG_LINK \ -+ | NETIF_MSG_TIMER \ -+ | NETIF_MSG_IFDOWN \ -+ | NETIF_MSG_IFUP \ -+ | NETIF_MSG_RX_ERR \ -+ | NETIF_MSG_TX_ERR ) ++config SYS_HAS_CPU_MIPS64_R1 ++ bool + -+static int ag71xx_msg_level = -1; ++config SYS_HAS_CPU_MIPS64_R2 ++ bool + -+module_param_named(msg_level, ag71xx_msg_level, int, 0); -+MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)"); ++config SYS_HAS_CPU_R3000 ++ bool + -+static void ag71xx_dump_dma_regs(struct ag71xx *ag) -+{ -+ DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n", -+ ag->dev->name, -+ ag71xx_rr(ag, AG71XX_REG_TX_CTRL), -+ ag71xx_rr(ag, AG71XX_REG_TX_DESC), -+ ag71xx_rr(ag, AG71XX_REG_TX_STATUS)); ++config SYS_HAS_CPU_TX39XX ++ bool + -+ DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n", -+ ag->dev->name, -+ ag71xx_rr(ag, AG71XX_REG_RX_CTRL), -+ ag71xx_rr(ag, AG71XX_REG_RX_DESC), -+ ag71xx_rr(ag, AG71XX_REG_RX_STATUS)); -+} ++config SYS_HAS_CPU_VR41XX ++ bool + -+static void ag71xx_dump_regs(struct ag71xx *ag) -+{ -+ DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n", -+ ag->dev->name, -+ ag71xx_rr(ag, AG71XX_REG_MAC_CFG1), -+ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), -+ ag71xx_rr(ag, AG71XX_REG_MAC_IPG), -+ ag71xx_rr(ag, AG71XX_REG_MAC_HDX), -+ ag71xx_rr(ag, AG71XX_REG_MAC_MFL)); -+ DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n", -+ ag->dev->name, -+ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL), -+ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1), -+ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2)); -+ DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n", -+ ag->dev->name, -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); -+ DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n", -+ ag->dev->name, -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); -+} ++config SYS_HAS_CPU_R4300 ++ bool + -+static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr) -+{ -+ DBG("%s: %s intr=%08x %s%s%s%s%s%s\n", -+ ag->dev->name, label, intr, -+ (intr & AG71XX_INT_TX_PS) ? "TXPS " : "", -+ (intr & AG71XX_INT_TX_UR) ? "TXUR " : "", -+ (intr & AG71XX_INT_TX_BE) ? "TXBE " : "", -+ (intr & AG71XX_INT_RX_PR) ? "RXPR " : "", -+ (intr & AG71XX_INT_RX_OF) ? "RXOF " : "", -+ (intr & AG71XX_INT_RX_BE) ? "RXBE " : ""); -+} ++config SYS_HAS_CPU_R4X00 ++ bool + -+static void ag71xx_ring_free(struct ag71xx_ring *ring) -+{ -+ kfree(ring->buf); ++config SYS_HAS_CPU_TX49XX ++ bool + -+ if (ring->descs_cpu) -+ dma_free_coherent(NULL, ring->size * ring->desc_size, -+ ring->descs_cpu, ring->descs_dma); -+} ++config SYS_HAS_CPU_R5000 ++ bool + -+static int ag71xx_ring_alloc(struct ag71xx_ring *ring, unsigned int size) -+{ -+ int err; -+ int i; ++config SYS_HAS_CPU_R5432 ++ bool + -+ ring->desc_size = sizeof(struct ag71xx_desc); -+ if (ring->desc_size % cache_line_size()) { -+ DBG("ag71xx: ring %p, desc size %u rounded to %u\n", -+ ring, ring->desc_size, -+ roundup(ring->desc_size, cache_line_size())); -+ ring->desc_size = roundup(ring->desc_size, cache_line_size()); -+ } ++config SYS_HAS_CPU_R5500 ++ bool + -+ ring->descs_cpu = dma_alloc_coherent(NULL, size * ring->desc_size, -+ &ring->descs_dma, GFP_ATOMIC); -+ if (!ring->descs_cpu) { -+ err = -ENOMEM; -+ goto err; -+ } ++config SYS_HAS_CPU_R6000 ++ bool + -+ ring->size = size; ++config SYS_HAS_CPU_NEVADA ++ bool + -+ ring->buf = kzalloc(size * sizeof(*ring->buf), GFP_KERNEL); -+ if (!ring->buf) { -+ err = -ENOMEM; -+ goto err; -+ } ++config SYS_HAS_CPU_R8000 ++ bool + -+ for (i = 0; i < size; i++) { -+ ring->buf[i].desc = (struct ag71xx_desc *)&ring->descs_cpu[i * ring->desc_size]; -+ DBG("ag71xx: ring %p, desc %d at %p\n", -+ ring, i, ring->buf[i].desc); -+ } ++config SYS_HAS_CPU_R10000 ++ bool + -+ return 0; ++config SYS_HAS_CPU_RM7000 ++ bool + -+ err: -+ return err; -+} ++config SYS_HAS_CPU_RM9000 ++ bool + -+static void ag71xx_ring_tx_clean(struct ag71xx *ag) -+{ -+ struct ag71xx_ring *ring = &ag->tx_ring; -+ struct net_device *dev = ag->dev; ++config SYS_HAS_CPU_SB1 ++ bool + -+ while (ring->curr != ring->dirty) { -+ u32 i = ring->dirty % AG71XX_TX_RING_SIZE; ++config SYS_HAS_CPU_CAVIUM_OCTEON ++ bool + -+ if (!ag71xx_desc_empty(ring->buf[i].desc)) { -+ ring->buf[i].desc->ctrl = 0; -+ dev->stats.tx_errors++; -+ } ++config SYS_HAS_CPU_BMIPS3300 ++ bool + -+ if (ring->buf[i].skb) -+ dev_kfree_skb_any(ring->buf[i].skb); ++config SYS_HAS_CPU_BMIPS4350 ++ bool + -+ ring->buf[i].skb = NULL; ++config SYS_HAS_CPU_BMIPS4380 ++ bool + -+ ring->dirty++; -+ } ++config SYS_HAS_CPU_BMIPS5000 ++ bool + -+ /* flush descriptors */ -+ wmb(); ++# ++# CPU may reorder R->R, R->W, W->R, W->W ++# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC ++# ++config WEAK_ORDERING ++ bool + -+} ++# ++# CPU may reorder reads and writes beyond LL/SC ++# CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC ++# ++config WEAK_REORDERING_BEYOND_LLSC ++ bool ++endmenu + -+static void ag71xx_ring_tx_init(struct ag71xx *ag) -+{ -+ struct ag71xx_ring *ring = &ag->tx_ring; -+ int i; ++# ++# These two indicate any level of the MIPS32 and MIPS64 architecture ++# ++config CPU_MIPS32 ++ bool ++ default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 + -+ for (i = 0; i < AG71XX_TX_RING_SIZE; i++) { -+ ring->buf[i].desc->next = (u32) (ring->descs_dma + -+ ring->desc_size * ((i + 1) % AG71XX_TX_RING_SIZE)); ++config CPU_MIPS64 ++ bool ++ default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 + -+ ring->buf[i].desc->ctrl = DESC_EMPTY; -+ ring->buf[i].skb = NULL; -+ } ++# ++# These two indicate the revision of the architecture, either Release 1 or Release 2 ++# ++config CPU_MIPSR1 ++ bool ++ default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 ++ ++config CPU_MIPSR2 ++ bool ++ default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON ++ ++config SYS_SUPPORTS_32BIT_KERNEL ++ bool ++config SYS_SUPPORTS_64BIT_KERNEL ++ bool ++config CPU_SUPPORTS_32BIT_KERNEL ++ bool ++config CPU_SUPPORTS_64BIT_KERNEL ++ bool ++config CPU_SUPPORTS_CPUFREQ ++ bool ++config CPU_SUPPORTS_ADDRWINCFG ++ bool ++config CPU_SUPPORTS_HUGEPAGES ++ bool ++config CPU_SUPPORTS_UNCACHED_ACCELERATED ++ bool ++config MIPS_PGD_C0_CONTEXT ++ bool ++ default y if 64BIT && CPU_MIPSR2 + -+ /* flush descriptors */ -+ wmb(); ++# ++# Set to y for ptrace access to watch registers. ++# ++config HARDWARE_WATCHPOINTS ++ bool ++ default y if CPU_MIPSR1 || CPU_MIPSR2 + -+ ring->curr = 0; -+ ring->dirty = 0; -+} ++menu "Kernel type" + -+static void ag71xx_ring_rx_clean(struct ag71xx *ag) -+{ -+ struct ag71xx_ring *ring = &ag->rx_ring; -+ int i; ++choice + -+ if (!ring->buf) -+ return; ++ prompt "Kernel code model" ++ help ++ You should only select this option if you have a workload that ++ actually benefits from 64-bit processing or if your machine has ++ large memory. You will only be presented a single option in this ++ menu if your system does not support both 32-bit and 64-bit kernels. ++ ++config 32BIT ++ bool "32-bit kernel" ++ depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL ++ select TRAD_SIGNALS ++ help ++ Select this option if you want to build a 32-bit kernel. ++config 64BIT ++ bool "64-bit kernel" ++ depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL ++ select HAVE_SYSCALL_WRAPPERS ++ help ++ Select this option if you want to build a 64-bit kernel. + -+ for (i = 0; i < AG71XX_RX_RING_SIZE; i++) -+ if (ring->buf[i].skb) { -+ dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr, -+ AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE); -+ kfree_skb(ring->buf[i].skb); -+ } -+} ++endchoice + -+static int ag71xx_rx_reserve(struct ag71xx *ag) -+{ -+ int reserve = 0; ++choice ++ prompt "Kernel page size" ++ default PAGE_SIZE_4KB + -+ if (ag71xx_get_pdata(ag)->is_ar724x) { -+ if (!ag71xx_has_ar8216(ag)) -+ reserve = 2; ++config PAGE_SIZE_4KB ++ bool "4kB" ++ depends on !CPU_LOONGSON2 ++ help ++ This option select the standard 4kB Linux page size. On some ++ R3000-family processors this is the only available page size. Using ++ 4kB page size will minimize memory consumption and is therefore ++ recommended for low memory systems. ++ ++config PAGE_SIZE_8KB ++ bool "8kB" ++ depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON ++ help ++ Using 8kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available ++ only on R8000 and cnMIPS processors. Note that you will need a ++ suitable Linux distribution to support this. ++ ++config PAGE_SIZE_16KB ++ bool "16kB" ++ depends on !CPU_R3000 && !CPU_TX39XX ++ help ++ Using 16kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available on ++ all non-R3000 family processors. Note that you will need a suitable ++ Linux distribution to support this. ++ ++config PAGE_SIZE_32KB ++ bool "32kB" ++ depends on CPU_CAVIUM_OCTEON ++ help ++ Using 32kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available ++ only on cnMIPS cores. Note that you will need a suitable Linux ++ distribution to support this. ++ ++config PAGE_SIZE_64KB ++ bool "64kB" ++ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX ++ help ++ Using 64kB page size will result in higher performance kernel at ++ the price of higher memory consumption. This option is available on ++ all non-R3000 family processor. Not that at the time of this ++ writing this option is still high experimental. ++ ++endchoice ++ ++config FORCE_MAX_ZONEORDER ++ int "Maximum zone order" ++ range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB ++ default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB ++ range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB ++ default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB ++ range 11 64 ++ default "11" ++ help ++ The kernel memory allocator divides physically contiguous memory ++ blocks into "zones", where each zone is a power of two number of ++ pages. This option selects the largest power of two that the kernel ++ keeps in the memory allocator. If you need to allocate very large ++ blocks of physically contiguous memory, then you may need to ++ increase this value. + -+ if (ag->phy_dev) -+ reserve += 4 - (ag->phy_dev->pkt_align % 4); ++ This config option is actually maximum order plus one. For example, ++ a value of 11 means that the largest free memory block is 2^10 pages. + -+ reserve %= 4; -+ } ++ The page size is not necessarily 4KB. Keep this in mind ++ when choosing a value for this option. + -+ return reserve + AG71XX_RX_PKT_RESERVE; -+} ++config BOARD_SCACHE ++ bool + ++config IP22_CPU_SCACHE ++ bool ++ select BOARD_SCACHE + -+static int ag71xx_ring_rx_init(struct ag71xx *ag) -+{ -+ struct ag71xx_ring *ring = &ag->rx_ring; -+ unsigned int reserve = ag71xx_rx_reserve(ag); -+ unsigned int i; -+ int ret; ++# ++# Support for a MIPS32 / MIPS64 style S-caches ++# ++config MIPS_CPU_SCACHE ++ bool ++ select BOARD_SCACHE + -+ ret = 0; -+ for (i = 0; i < AG71XX_RX_RING_SIZE; i++) { -+ ring->buf[i].desc->next = (u32) (ring->descs_dma + -+ ring->desc_size * ((i + 1) % AG71XX_RX_RING_SIZE)); ++config R5000_CPU_SCACHE ++ bool ++ select BOARD_SCACHE + -+ DBG("ag71xx: RX desc at %p, next is %08x\n", -+ ring->buf[i].desc, -+ ring->buf[i].desc->next); -+ } ++config RM7000_CPU_SCACHE ++ bool ++ select BOARD_SCACHE + -+ for (i = 0; i < AG71XX_RX_RING_SIZE; i++) { -+ struct sk_buff *skb; -+ dma_addr_t dma_addr; ++config SIBYTE_DMA_PAGEOPS ++ bool "Use DMA to clear/copy pages" ++ depends on CPU_SB1 ++ help ++ Instead of using the CPU to zero and copy pages, use a Data Mover ++ channel. These DMA channels are otherwise unused by the standard ++ SiByte Linux port. Seems to give a small performance benefit. + -+ skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve); -+ if (!skb) { -+ ret = -ENOMEM; -+ break; -+ } ++config CPU_HAS_PREFETCH ++ bool + -+ skb->dev = ag->dev; -+ skb_reserve(skb, reserve); ++choice ++ prompt "MIPS MT options" + -+ dma_addr = dma_map_single(&ag->dev->dev, skb->data, -+ AG71XX_RX_PKT_SIZE, -+ DMA_FROM_DEVICE); -+ ring->buf[i].skb = skb; -+ ring->buf[i].dma_addr = dma_addr; -+ ring->buf[i].desc->data = (u32) dma_addr; -+ ring->buf[i].desc->ctrl = DESC_EMPTY; -+ } ++config MIPS_MT_DISABLED ++ bool "Disable multithreading support." ++ help ++ Use this option if your workload can't take advantage of ++ MIPS hardware multithreading support. On systems that don't have ++ the option of an MT-enabled processor this option will be the only ++ option in this menu. ++ ++config MIPS_MT_SMP ++ bool "Use 1 TC on each available VPE for SMP" ++ depends on SYS_SUPPORTS_MULTITHREADING ++ select CPU_MIPSR2_IRQ_VI ++ select CPU_MIPSR2_IRQ_EI ++ select MIPS_MT ++ select NR_CPUS_DEFAULT_2 ++ select SMP ++ select SYS_SUPPORTS_SCHED_SMT if SMP ++ select SYS_SUPPORTS_SMP ++ select SMP_UP ++ help ++ This is a kernel model which is known a VSMP but lately has been ++ marketesed into SMVP. ++ Virtual SMP uses the processor's VPEs to implement virtual ++ processors. In currently available configuration of the 34K processor ++ this allows for a dual processor. Both processors will share the same ++ primary caches; each will obtain the half of the TLB for it's own ++ exclusive use. For a layman this model can be described as similar to ++ what Intel calls Hyperthreading. ++ ++ For further information see http://www.linux-mips.org/wiki/34K#VSMP ++ ++config MIPS_MT_SMTC ++ bool "SMTC: Use all TCs on all VPEs for SMP" ++ depends on CPU_MIPS32_R2 ++ #depends on CPU_MIPS64_R2 # once there is hardware ... ++ depends on SYS_SUPPORTS_MULTITHREADING ++ select CPU_MIPSR2_IRQ_VI ++ select CPU_MIPSR2_IRQ_EI ++ select MIPS_MT ++ select NR_CPUS_DEFAULT_8 ++ select SMP ++ select SYS_SUPPORTS_SMP ++ select SMP_UP ++ help ++ This is a kernel model which is known a SMTC or lately has been ++ marketesed into SMVP. ++ is presenting the available TC's of the core as processors to Linux. ++ On currently available 34K processors this means a Linux system will ++ see up to 5 processors. The implementation of the SMTC kernel differs ++ significantly from VSMP and cannot efficiently coexist in the same ++ kernel binary so the choice between VSMP and SMTC is a compile time ++ decision. + -+ /* flush descriptors */ -+ wmb(); ++ For further information see http://www.linux-mips.org/wiki/34K#SMTC + -+ ring->curr = 0; -+ ring->dirty = 0; ++endchoice + -+ return ret; -+} ++config MIPS_MT ++ bool + -+static int ag71xx_ring_rx_refill(struct ag71xx *ag) -+{ -+ struct ag71xx_ring *ring = &ag->rx_ring; -+ unsigned int reserve = ag71xx_rx_reserve(ag); -+ unsigned int count; ++config SCHED_SMT ++ bool "SMT (multithreading) scheduler support" ++ depends on SYS_SUPPORTS_SCHED_SMT ++ default n ++ help ++ SMT scheduler support improves the CPU scheduler's decision making ++ when dealing with MIPS MT enabled cores at a cost of slightly ++ increased overhead in some places. If unsure say N here. + -+ count = 0; -+ for (; ring->curr - ring->dirty > 0; ring->dirty++) { -+ unsigned int i; ++config SYS_SUPPORTS_SCHED_SMT ++ bool + -+ i = ring->dirty % AG71XX_RX_RING_SIZE; + -+ if (ring->buf[i].skb == NULL) { -+ dma_addr_t dma_addr; -+ struct sk_buff *skb; ++config SYS_SUPPORTS_MULTITHREADING ++ bool + -+ skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve); -+ if (skb == NULL) -+ break; ++config MIPS_MT_FPAFF ++ bool "Dynamic FPU affinity for FP-intensive threads" ++ default y ++ depends on MIPS_MT_SMP || MIPS_MT_SMTC ++ ++config MIPS_VPE_LOADER ++ bool "VPE loader support." ++ depends on SYS_SUPPORTS_MULTITHREADING ++ select CPU_MIPSR2_IRQ_VI ++ select CPU_MIPSR2_IRQ_EI ++ select MIPS_MT ++ help ++ Includes a loader for loading an elf relocatable object ++ onto another VPE and running it. + -+ skb_reserve(skb, reserve); -+ skb->dev = ag->dev; ++config MIPS_MT_SMTC_IM_BACKSTOP ++ bool "Use per-TC register bits as backstop for inhibited IM bits" ++ depends on MIPS_MT_SMTC ++ default n ++ help ++ To support multiple TC microthreads acting as "CPUs" within ++ a VPE, VPE-wide interrupt mask bits must be specially manipulated ++ during interrupt handling. To support legacy drivers and interrupt ++ controller management code, SMTC has a "backstop" to track and ++ if necessary restore the interrupt mask. This has some performance ++ impact on interrupt service overhead. ++ ++config MIPS_MT_SMTC_IRQAFF ++ bool "Support IRQ affinity API" ++ depends on MIPS_MT_SMTC ++ default n ++ help ++ Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) ++ for SMTC Linux kernel. Requires platform support, of which ++ an example can be found in the MIPS kernel i8259 and Malta ++ platform code. Adds some overhead to interrupt dispatch, and ++ should be used only if you know what you are doing. ++ ++config MIPS_VPE_LOADER_TOM ++ bool "Load VPE program into memory hidden from linux" ++ depends on MIPS_VPE_LOADER ++ default y ++ help ++ The loader can use memory that is present but has been hidden from ++ Linux using the kernel command line option "mem=xxMB". It's up to ++ you to ensure the amount you put in the option and the space your ++ program requires is less or equal to the amount physically present. ++ ++# this should possibly be in drivers/char, but it is rather cpu related. Hmmm ++config MIPS_VPE_APSP_API ++ bool "Enable support for AP/SP API (RTLX)" ++ depends on MIPS_VPE_LOADER ++ help + -+ dma_addr = dma_map_single(&ag->dev->dev, skb->data, -+ AG71XX_RX_PKT_SIZE, -+ DMA_FROM_DEVICE); ++config MIPS_APSP_KSPD ++ bool "Enable KSPD" ++ depends on MIPS_VPE_APSP_API ++ default y ++ help ++ KSPD is a kernel daemon that accepts syscall requests from the SP ++ side, actions them and returns the results. It also handles the ++ "exit" syscall notifying other kernel modules the SP program is ++ exiting. You probably want to say yes here. ++ ++config MIPS_CMP ++ bool "MIPS CMP framework support" ++ depends on SYS_SUPPORTS_MIPS_CMP ++ select SYNC_R4K ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_SCHED_SMT if SMP ++ select WEAK_ORDERING ++ default n ++ help ++ This is a placeholder option for the GCMP work. It will need to ++ be handled differently... + -+ ring->buf[i].skb = skb; -+ ring->buf[i].dma_addr = dma_addr; -+ ring->buf[i].desc->data = (u32) dma_addr; -+ } ++config SB1_PASS_1_WORKAROUNDS ++ bool ++ depends on CPU_SB1_PASS_1 ++ default y + -+ ring->buf[i].desc->ctrl = DESC_EMPTY; -+ count++; -+ } ++config SB1_PASS_2_WORKAROUNDS ++ bool ++ depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) ++ default y + -+ /* flush descriptors */ -+ wmb(); ++config SB1_PASS_2_1_WORKAROUNDS ++ bool ++ depends on CPU_SB1 && CPU_SB1_PASS_2 ++ default y + -+ DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count); ++config 64BIT_PHYS_ADDR ++ bool + -+ return count; -+} ++config ARCH_PHYS_ADDR_T_64BIT ++ def_bool 64BIT_PHYS_ADDR + -+static int ag71xx_rings_init(struct ag71xx *ag) -+{ -+ int ret; ++config CPU_HAS_SMARTMIPS ++ depends on SYS_SUPPORTS_SMARTMIPS ++ bool "Support for the SmartMIPS ASE" ++ help ++ SmartMIPS is a extension of the MIPS32 architecture aimed at ++ increased security at both hardware and software level for ++ smartcards. Enabling this option will allow proper use of the ++ SmartMIPS instructions by Linux applications. However a kernel with ++ this option will not work on a MIPS core without SmartMIPS core. If ++ you don't know you probably don't have SmartMIPS and should say N ++ here. + -+ ret = ag71xx_ring_alloc(&ag->tx_ring, AG71XX_TX_RING_SIZE); -+ if (ret) -+ return ret; ++config CPU_HAS_WB ++ bool + -+ ag71xx_ring_tx_init(ag); ++# ++# Vectored interrupt mode is an R2 feature ++# ++config CPU_MIPSR2_IRQ_VI ++ bool + -+ ret = ag71xx_ring_alloc(&ag->rx_ring, AG71XX_RX_RING_SIZE); -+ if (ret) -+ return ret; ++# ++# Extended interrupt mode is an R2 feature ++# ++config CPU_MIPSR2_IRQ_EI ++ bool + -+ ret = ag71xx_ring_rx_init(ag); -+ return ret; -+} ++config CPU_HAS_SYNC ++ bool ++ depends on !CPU_R3000 ++ default y + -+static void ag71xx_rings_cleanup(struct ag71xx *ag) -+{ -+ ag71xx_ring_rx_clean(ag); -+ ag71xx_ring_free(&ag->rx_ring); ++config GENERIC_CLOCKEVENTS_BROADCAST ++ bool + -+ ag71xx_ring_tx_clean(ag); -+ ag71xx_ring_free(&ag->tx_ring); -+} ++# ++# CPU non-features ++# ++config CPU_DADDI_WORKAROUNDS ++ bool + -+static unsigned char *ag71xx_speed_str(struct ag71xx *ag) -+{ -+ switch (ag->speed) { -+ case SPEED_1000: -+ return "1000"; -+ case SPEED_100: -+ return "100"; -+ case SPEED_10: -+ return "10"; -+ } ++config CPU_R4000_WORKAROUNDS ++ bool ++ select CPU_R4400_WORKAROUNDS + -+ return "?"; -+} ++config CPU_R4400_WORKAROUNDS ++ bool + -+void ag71xx_link_adjust(struct ag71xx *ag) -+{ -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); -+ u32 cfg2; -+ u32 ifctl; -+ u32 fifo5; -+ u32 mii_speed; ++# ++# - Highmem only makes sense for the 32-bit kernel. ++# - The current highmem code will only work properly on physically indexed ++# caches such as R3000, SB1, R7000 or those that look like they're virtually ++# indexed such as R4000/R4400 SC and MC versions or R10000. So for the ++# moment we protect the user and offer the highmem option only on machines ++# where it's known to be safe. This will not offer highmem on a few systems ++# such as MIPS32 and MIPS64 CPUs which may have virtual and physically ++# indexed CPUs but we're playing safe. ++# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we ++# know they might have memory configurations that could make use of highmem ++# support. ++# ++config HIGHMEM ++ bool "High Memory Support" ++ depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM + -+ if (!ag->link) { -+ netif_carrier_off(ag->dev); -+ if (netif_msg_link(ag)) -+ printk(KERN_INFO "%s: link down\n", ag->dev->name); -+ return; -+ } ++config CPU_SUPPORTS_HIGHMEM ++ bool + -+ cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2); -+ cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX); -+ cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0; ++config SYS_SUPPORTS_HIGHMEM ++ bool + -+ ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL); -+ ifctl &= ~(MAC_IFCTL_SPEED); ++config SYS_SUPPORTS_SMARTMIPS ++ bool + -+ fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5); -+ fifo5 &= ~FIFO_CFG5_BM; ++config ARCH_FLATMEM_ENABLE ++ def_bool y ++ depends on !NUMA && !CPU_LOONGSON2 + -+ switch (ag->speed) { -+ case SPEED_1000: -+ mii_speed = MII_CTRL_SPEED_1000; -+ cfg2 |= MAC_CFG2_IF_1000; -+ fifo5 |= FIFO_CFG5_BM; -+ break; -+ case SPEED_100: -+ mii_speed = MII_CTRL_SPEED_100; -+ cfg2 |= MAC_CFG2_IF_10_100; -+ ifctl |= MAC_IFCTL_SPEED; -+ break; -+ case SPEED_10: -+ mii_speed = MII_CTRL_SPEED_10; -+ cfg2 |= MAC_CFG2_IF_10_100; -+ break; -+ default: -+ BUG(); -+ return; -+ } ++config ARCH_DISCONTIGMEM_ENABLE ++ bool ++ default y if SGI_IP27 ++ help ++ Say Y to support efficient handling of discontiguous physical memory, ++ for architectures which are either NUMA (Non-Uniform Memory Access) ++ or have huge holes in the physical address space for other reasons. ++ See for more. + -+ if (pdata->is_ar91xx) -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff); -+ else if (pdata->is_ar724x) -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3); -+ else -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff); ++config ARCH_POPULATES_NODE_MAP ++ def_bool y + -+ if (pdata->set_pll) -+ pdata->set_pll(ag->speed); ++config ARCH_SPARSEMEM_ENABLE ++ bool ++ select SPARSEMEM_STATIC + -+ ag71xx_mii_ctrl_set_speed(ag, mii_speed); ++config NUMA ++ bool "NUMA Support" ++ depends on SYS_SUPPORTS_NUMA ++ help ++ Say Y to compile the kernel to support NUMA (Non-Uniform Memory ++ Access). This option improves performance on systems with more ++ than two nodes; on two node systems it is generally better to ++ leave it disabled; on single node systems disable this option ++ disabled. ++ ++config SYS_SUPPORTS_NUMA ++ bool ++ ++config NODES_SHIFT ++ int ++ default "6" ++ depends on NEED_MULTIPLE_NODES ++ ++config HW_PERF_EVENTS ++ bool "Enable hardware performance counter support for perf events" ++ depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32 ++ default y ++ help ++ Enable hardware performance counter support for perf events. If ++ disabled, perf events will use software events only. + -+ ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2); -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5); -+ ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl); ++source "mm/Kconfig" + -+ netif_carrier_on(ag->dev); -+ if (netif_msg_link(ag)) -+ printk(KERN_INFO "%s: link up (%sMbps/%s duplex)\n", -+ ag->dev->name, -+ ag71xx_speed_str(ag), -+ (DUPLEX_FULL == ag->duplex) ? "Full" : "Half"); ++config SMP ++ bool "Multi-Processing support" ++ depends on SYS_SUPPORTS_SMP ++ select IRQ_PER_CPU ++ select USE_GENERIC_SMP_HELPERS ++ help ++ This enables support for systems with more than one CPU. If you have ++ a system with only one CPU, like most personal computers, say N. If ++ you have a system with more than one CPU, say Y. + -+ DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n", -+ ag->dev->name, -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); ++ If you say N here, the kernel will run on single and multiprocessor ++ machines, but will use only one CPU of a multiprocessor machine. If ++ you say Y here, the kernel will run on many, but not all, ++ singleprocessor machines. On a singleprocessor machine, the kernel ++ will run faster if you say N here. + -+ DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n", -+ ag->dev->name, -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), -+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); ++ People using multiprocessor machines who say Y here should also say ++ Y to "Enhanced Real Time Clock Support", below. + -+ DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x, mii_ctrl=%#x\n", -+ ag->dev->name, -+ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), -+ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL), -+ ag71xx_mii_ctrl_rr(ag)); -+} ++ See also the SMP-HOWTO available at ++ . + -+static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac) -+{ -+ u32 t; ++ If you don't know what to do here, say N. + -+ t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16) -+ | (((u32) mac[3]) << 8) | ((u32) mac[2]); ++config SMP_UP ++ bool + -+ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t); ++config SYS_SUPPORTS_MIPS_CMP ++ bool + -+ t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16); -+ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t); -+} ++config SYS_SUPPORTS_SMP ++ bool + -+static void ag71xx_dma_reset(struct ag71xx *ag) -+{ -+ u32 val; -+ int i; ++config NR_CPUS_DEFAULT_1 ++ bool + -+ ag71xx_dump_dma_regs(ag); ++config NR_CPUS_DEFAULT_2 ++ bool + -+ /* stop RX and TX */ -+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); -+ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); ++config NR_CPUS_DEFAULT_4 ++ bool + -+ /* clear descriptor addresses */ -+ ag71xx_wr(ag, AG71XX_REG_TX_DESC, 0); -+ ag71xx_wr(ag, AG71XX_REG_RX_DESC, 0); ++config NR_CPUS_DEFAULT_8 ++ bool + -+ /* clear pending RX/TX interrupts */ -+ for (i = 0; i < 256; i++) { -+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); -+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); -+ } ++config NR_CPUS_DEFAULT_16 ++ bool + -+ /* clear pending errors */ -+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF); -+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR); ++config NR_CPUS_DEFAULT_32 ++ bool + -+ val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); -+ if (val) -+ printk(KERN_ALERT "%s: unable to clear DMA Rx status: %08x\n", -+ ag->dev->name, val); ++config NR_CPUS_DEFAULT_64 ++ bool + -+ val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); ++config NR_CPUS ++ int "Maximum number of CPUs (2-64)" ++ range 1 64 if NR_CPUS_DEFAULT_1 ++ depends on SMP ++ default "1" if NR_CPUS_DEFAULT_1 ++ default "2" if NR_CPUS_DEFAULT_2 ++ default "4" if NR_CPUS_DEFAULT_4 ++ default "8" if NR_CPUS_DEFAULT_8 ++ default "16" if NR_CPUS_DEFAULT_16 ++ default "32" if NR_CPUS_DEFAULT_32 ++ default "64" if NR_CPUS_DEFAULT_64 ++ help ++ This allows you to specify the maximum number of CPUs which this ++ kernel will support. The maximum supported value is 32 for 32-bit ++ kernel and 64 for 64-bit kernels; the minimum value which makes ++ sense is 1 for Qemu (useful only for kernel debugging purposes) ++ and 2 for all others. + -+ /* mask out reserved bits */ -+ val &= ~0xff000000; ++ This is purely to save memory - each supported CPU adds ++ approximately eight kilobytes to the kernel image. For best ++ performance should round up your number of processors to the next ++ power of two. + -+ if (val) -+ printk(KERN_ALERT "%s: unable to clear DMA Tx status: %08x\n", -+ ag->dev->name, val); ++source "kernel/time/Kconfig" + -+ ag71xx_dump_dma_regs(ag); -+} ++# ++# Timer Interrupt Frequency Configuration ++# + -+#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \ -+ MAC_CFG1_SRX | MAC_CFG1_STX) ++choice ++ prompt "Timer frequency" ++ default HZ_250 ++ help ++ Allows the configuration of the timer frequency. + -+#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT) ++ config HZ_48 ++ bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ + -+#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \ -+ FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \ -+ FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \ -+ FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \ -+ FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \ -+ FIFO_CFG4_VT) ++ config HZ_100 ++ bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ + -+#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \ -+ FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \ -+ FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \ -+ FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \ -+ FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \ -+ FIFO_CFG5_17 | FIFO_CFG5_SF) ++ config HZ_128 ++ bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ + -+static void ag71xx_hw_init(struct ag71xx *ag) -+{ -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ config HZ_250 ++ bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ + -+ ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR); -+ udelay(20); ++ config HZ_256 ++ bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ + -+ ar71xx_device_stop(pdata->reset_bit); -+ mdelay(100); -+ ar71xx_device_start(pdata->reset_bit); -+ mdelay(100); ++ config HZ_1000 ++ bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ + -+ /* setup MAC configuration registers */ -+ if (pdata->is_ar724x) -+ ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, -+ MAC_CFG1_INIT | MAC_CFG1_TFC | MAC_CFG1_RFC); -+ else -+ ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT); ++ config HZ_1024 ++ bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ + -+ ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, -+ MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK); ++endchoice + -+ /* setup max frame length */ -+ ag71xx_wr(ag, AG71XX_REG_MAC_MFL, AG71XX_TX_MTU_LEN); ++config SYS_SUPPORTS_48HZ ++ bool + -+ /* setup MII interface type */ -+ ag71xx_mii_ctrl_set_if(ag, pdata->mii_if); ++config SYS_SUPPORTS_100HZ ++ bool + -+ /* setup FIFO configuration registers */ -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT); -+ if (pdata->is_ar724x) { -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1); -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2); -+ } else { -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000); -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff); -+ } -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT); -+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT); ++config SYS_SUPPORTS_128HZ ++ bool + -+ ag71xx_dma_reset(ag); -+} ++config SYS_SUPPORTS_250HZ ++ bool + -+static void ag71xx_hw_start(struct ag71xx *ag) -+{ -+ /* start RX engine */ -+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); ++config SYS_SUPPORTS_256HZ ++ bool + -+ /* enable interrupts */ -+ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT); -+} ++config SYS_SUPPORTS_1000HZ ++ bool + -+static void ag71xx_hw_stop(struct ag71xx *ag) -+{ -+ /* disable all interrupts */ -+ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0); ++config SYS_SUPPORTS_1024HZ ++ bool + -+ ag71xx_dma_reset(ag); -+} ++config SYS_SUPPORTS_ARBIT_HZ ++ bool ++ default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \ ++ !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \ ++ !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \ ++ !SYS_SUPPORTS_1024HZ + -+static int ag71xx_open(struct net_device *dev) -+{ -+ struct ag71xx *ag = netdev_priv(dev); -+ int ret; ++config HZ ++ int ++ default 48 if HZ_48 ++ default 100 if HZ_100 ++ default 128 if HZ_128 ++ default 250 if HZ_250 ++ default 256 if HZ_256 ++ default 1000 if HZ_1000 ++ default 1024 if HZ_1024 + -+ ret = ag71xx_rings_init(ag); -+ if (ret) -+ goto err; ++source "kernel/Kconfig.preempt" + -+ napi_enable(&ag->napi); ++config MIPS_INSANE_LARGE ++ bool "Support for large 64-bit configurations" ++ depends on CPU_R10000 && 64BIT ++ help ++ MIPS R10000 does support a 44 bit / 16TB address space as opposed to ++ previous 64-bit processors which only supported 40 bit / 1TB. If you ++ need processes of more than 1TB virtual address space, say Y here. ++ This will result in additional memory usage, so it is not ++ recommended for normal users. ++ ++config KEXEC ++ bool "Kexec system call (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ help ++ kexec is a system call that implements the ability to shutdown your ++ current kernel, and to start another kernel. It is like a reboot ++ but it is independent of the system firmware. And like a reboot ++ you can start any kernel with it, not just Linux. ++ ++ The name comes from the similarity to the exec system call. ++ ++ It is an ongoing process to be certain the hardware in a machine ++ is properly shutdown, so do not be surprised if this code does not ++ initially work for you. It may help to enable device hotplugging ++ support. As of this writing the exact hardware interface is ++ strongly in flux, so no good recommendation can be made. ++ ++config SECCOMP ++ bool "Enable seccomp to safely compute untrusted bytecode" ++ depends on PROC_FS ++ default y ++ help ++ This kernel feature is useful for number crunching applications ++ that may need to compute untrusted bytecode during their ++ execution. By using pipes or other transports made available to ++ the process as file descriptors supporting the read/write ++ syscalls, it's possible to isolate those applications in ++ their own address space using seccomp. Once seccomp is ++ enabled via /proc//seccomp, it cannot be disabled ++ and the task is only allowed to execute a few safe syscalls ++ defined by each seccomp mode. ++ ++ If unsure, say Y. Only embedded should say N here. ++ ++config USE_OF ++ bool "Flattened Device Tree support" ++ select OF ++ select OF_EARLY_FLATTREE ++ help ++ Include support for flattened device tree machine descriptions. + -+ netif_carrier_off(dev); -+ ag71xx_phy_start(ag); ++endmenu + -+ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma); -+ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma); ++config LOCKDEP_SUPPORT ++ bool ++ default y + -+ ag71xx_hw_set_macaddr(ag, dev->dev_addr); ++config STACKTRACE_SUPPORT ++ bool ++ default y + -+ ag71xx_hw_start(ag); ++source "init/Kconfig" + -+ netif_start_queue(dev); ++source "kernel/Kconfig.freezer" + -+ return 0; ++menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" + -+ err: -+ ag71xx_rings_cleanup(ag); -+ return ret; -+} ++config HW_HAS_EISA ++ bool ++config HW_HAS_PCI ++ bool + -+static int ag71xx_stop(struct net_device *dev) -+{ -+ struct ag71xx *ag = netdev_priv(dev); -+ unsigned long flags; ++config PCI ++ bool "Support for PCI controller" ++ depends on HW_HAS_PCI ++ select PCI_DOMAINS ++ help ++ Find out whether you have a PCI motherboard. PCI is the name of a ++ bus system, i.e. the way the CPU talks to the other stuff inside ++ your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, ++ say Y, otherwise N. + -+ netif_carrier_off(dev); -+ ag71xx_phy_stop(ag); ++config PCI_DOMAINS ++ bool + -+ spin_lock_irqsave(&ag->lock, flags); ++source "drivers/pci/Kconfig" + -+ netif_stop_queue(dev); ++# ++# ISA support is now enabled via select. Too many systems still have the one ++# or other ISA chip on the board that users don't know about so don't expect ++# users to choose the right thing ... ++# ++config ISA ++ bool + -+ ag71xx_hw_stop(ag); ++config EISA ++ bool "EISA support" ++ depends on HW_HAS_EISA ++ select ISA ++ select GENERIC_ISA_DMA ++ ---help--- ++ The Extended Industry Standard Architecture (EISA) bus was ++ developed as an open alternative to the IBM MicroChannel bus. + -+ napi_disable(&ag->napi); -+ del_timer_sync(&ag->oom_timer); ++ The EISA bus provided some of the features of the IBM MicroChannel ++ bus while maintaining backward compatibility with cards made for ++ the older ISA bus. The EISA bus saw limited use between 1988 and ++ 1995 when it was made obsolete by the PCI bus. + -+ spin_unlock_irqrestore(&ag->lock, flags); ++ Say Y here if you are building a kernel for an EISA-based machine. + -+ ag71xx_rings_cleanup(ag); ++ Otherwise, say N. + -+ return 0; -+} ++source "drivers/eisa/Kconfig" + -+static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb, -+ struct net_device *dev) -+{ -+ struct ag71xx *ag = netdev_priv(dev); -+ struct ag71xx_ring *ring = &ag->tx_ring; -+ struct ag71xx_desc *desc; -+ dma_addr_t dma_addr; -+ int i; ++config TC ++ bool "TURBOchannel support" ++ depends on MACH_DECSTATION ++ help ++ TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS ++ processors. TURBOchannel programming specifications are available ++ at: ++ ++ and: ++ ++ Linux driver support status is documented at: ++ ++ ++#config ACCESSBUS ++# bool "Access.Bus support" ++# depends on TC ++ ++config MMU ++ bool ++ default y + -+ i = ring->curr % AG71XX_TX_RING_SIZE; -+ desc = ring->buf[i].desc; ++config I8253 ++ bool ++ select MIPS_EXTERNAL_TIMER + -+ if (!ag71xx_desc_empty(desc)) -+ goto err_drop; ++config ZONE_DMA32 ++ bool + -+ if (ag71xx_has_ar8216(ag)) -+ ag71xx_add_ar8216_header(ag, skb); ++source "drivers/pcmcia/Kconfig" + -+ if (skb->len <= 0) { -+ DBG("%s: packet len is too small\n", ag->dev->name); -+ goto err_drop; -+ } ++source "drivers/pci/hotplug/Kconfig" + -+ dma_addr = dma_map_single(&dev->dev, skb->data, skb->len, -+ DMA_TO_DEVICE); ++config RAPIDIO ++ bool "RapidIO support" ++ depends on PCI ++ default n ++ help ++ If you say Y here, the kernel will include drivers and ++ infrastructure code to support RapidIO interconnect devices. + -+ ring->buf[i].skb = skb; ++source "drivers/rapidio/Kconfig" + -+ /* setup descriptor fields */ -+ desc->data = (u32) dma_addr; -+ desc->ctrl = (skb->len & DESC_PKTLEN_M); ++endmenu + -+ /* flush descriptor */ -+ wmb(); ++menu "Executable file formats" + -+ ring->curr++; -+ if (ring->curr == (ring->dirty + AG71XX_TX_THRES_STOP)) { -+ DBG("%s: tx queue full\n", ag->dev->name); -+ netif_stop_queue(dev); -+ } ++source "fs/Kconfig.binfmt" + -+ DBG("%s: packet injected into TX queue\n", ag->dev->name); ++config TRAD_SIGNALS ++ bool + -+ /* enable TX engine */ -+ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE); ++config MIPS32_COMPAT ++ bool "Kernel support for Linux/MIPS 32-bit binary compatibility" ++ depends on 64BIT ++ help ++ Select this option if you want Linux/MIPS 32-bit binary ++ compatibility. Since all software available for Linux/MIPS is ++ currently 32-bit you should say Y here. + -+ return NETDEV_TX_OK; ++config COMPAT ++ bool ++ depends on MIPS32_COMPAT ++ default y + -+ err_drop: -+ dev->stats.tx_dropped++; ++config SYSVIPC_COMPAT ++ bool ++ depends on COMPAT && SYSVIPC ++ default y + -+ dev_kfree_skb(skb); -+ return NETDEV_TX_OK; -+} ++config MIPS32_O32 ++ bool "Kernel support for o32 binaries" ++ depends on MIPS32_COMPAT ++ help ++ Select this option if you want to run o32 binaries. These are pure ++ 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of ++ existing binaries are in this format. + -+static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -+{ -+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data; -+ struct ag71xx *ag = netdev_priv(dev); -+ int ret; ++ If unsure, say Y. + -+ switch (cmd) { -+ case SIOCETHTOOL: -+ if (ag->phy_dev == NULL) -+ break; ++config MIPS32_N32 ++ bool "Kernel support for n32 binaries" ++ depends on MIPS32_COMPAT ++ help ++ Select this option if you want to run n32 binaries. These are ++ 64-bit binaries using 32-bit quantities for addressing and certain ++ data that would normally be 64-bit. They are used in special ++ cases. + -+ spin_lock_irq(&ag->lock); -+ ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data); -+ spin_unlock_irq(&ag->lock); -+ return ret; ++ If unsure, say N. + -+ case SIOCSIFHWADDR: -+ if (copy_from_user -+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) -+ return -EFAULT; -+ return 0; ++config BINFMT_ELF32 ++ bool ++ default y if MIPS32_O32 || MIPS32_N32 + -+ case SIOCGIFHWADDR: -+ if (copy_to_user -+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) -+ return -EFAULT; -+ return 0; ++endmenu + -+ case SIOCGMIIPHY: -+ case SIOCGMIIREG: -+ case SIOCSMIIREG: -+ if (ag->phy_dev == NULL) -+ break; ++menu "Power management options" + -+ return phy_mii_ioctl(ag->phy_dev, data, cmd); ++config ARCH_HIBERNATION_POSSIBLE ++ def_bool y ++ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP + -+ default: -+ break; -+ } ++config ARCH_SUSPEND_POSSIBLE ++ def_bool y ++ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP + -+ return -EOPNOTSUPP; -+} ++source "kernel/power/Kconfig" + -+static void ag71xx_oom_timer_handler(unsigned long data) -+{ -+ struct net_device *dev = (struct net_device *) data; -+ struct ag71xx *ag = netdev_priv(dev); ++endmenu + -+ napi_schedule(&ag->napi); -+} ++source "arch/mips/kernel/cpufreq/Kconfig" + -+static void ag71xx_tx_timeout(struct net_device *dev) -+{ -+ struct ag71xx *ag = netdev_priv(dev); ++source "net/Kconfig" + -+ if (netif_msg_tx_err(ag)) -+ printk(KERN_DEBUG "%s: tx timeout\n", ag->dev->name); ++source "drivers/Kconfig" + -+ schedule_work(&ag->restart_work); -+} ++source "fs/Kconfig" + -+static void ag71xx_restart_work_func(struct work_struct *work) -+{ -+ struct ag71xx *ag = container_of(work, struct ag71xx, restart_work); ++source "arch/mips/Kconfig.debug" + -+ ag71xx_stop(ag->dev); -+ ag71xx_open(ag->dev); -+} ++source "security/Kconfig" + -+static int ag71xx_tx_packets(struct ag71xx *ag) -+{ -+ struct ag71xx_ring *ring = &ag->tx_ring; -+ int sent; ++source "crypto/Kconfig" + -+ DBG("%s: processing TX ring\n", ag->dev->name); ++menuconfig VIRTUALIZATION ++ bool "Virtualization" ++ default n ++ ---help--- ++ Say Y here to get to see options for using your Linux host to run other ++ operating systems inside virtual machines (guests). ++ This option alone does not add any kernel code. + -+ sent = 0; -+ while (ring->dirty != ring->curr) { -+ unsigned int i = ring->dirty % AG71XX_TX_RING_SIZE; -+ struct ag71xx_desc *desc = ring->buf[i].desc; -+ struct sk_buff *skb = ring->buf[i].skb; ++ If you say N, all options in this submenu will be skipped and disabled. + -+ if (!ag71xx_desc_empty(desc)) -+ break; ++if VIRTUALIZATION + -+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); ++source drivers/virtio/Kconfig + -+ ag->dev->stats.tx_bytes += skb->len; -+ ag->dev->stats.tx_packets++; ++endif # VIRTUALIZATION + -+ dev_kfree_skb_any(skb); -+ ring->buf[i].skb = NULL; ++source "lib/Kconfig" +diff -Nur linux-2.6.39.orig/arch/mips/kernel/traps.c linux-2.6.39/arch/mips/kernel/traps.c +--- linux-2.6.39.orig/arch/mips/kernel/traps.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/kernel/traps.c 2011-08-24 05:53:05.179230891 +0200 +@@ -54,6 +54,7 @@ + #include + #include + #include ++#include + + extern void check_wait(void); + extern asmlinkage void r4k_wait(void); +@@ -1576,6 +1577,8 @@ + if (cpu_has_mips_r2) { + cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; + cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; ++ if (get_c0_compare_irq) ++ cp0_compare_irq = get_c0_compare_irq(); + cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; + if (cp0_perfcount_irq == cp0_compare_irq) + cp0_perfcount_irq = -1; +diff -Nur linux-2.6.39.orig/arch/mips/Makefile linux-2.6.39/arch/mips/Makefile +--- linux-2.6.39.orig/arch/mips/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/Makefile 2011-08-24 02:42:39.917989402 +0200 +@@ -158,6 +158,13 @@ + endif + cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 + ++# ++# Atheros AR71xx ++# ++core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ ++cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx ++load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 + -+ ring->dirty++; -+ sent++; -+ } + cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) + cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) + cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) +@@ -174,6 +181,7 @@ + # + libs-$(CONFIG_ARC) += arch/mips/fw/arc/ + libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ ++libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ + libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ + libs-y += arch/mips/fw/lib/ + +diff -Nur linux-2.6.39.orig/arch/mips/pci/Makefile linux-2.6.39/arch/mips/pci/Makefile +--- linux-2.6.39.orig/arch/mips/pci/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/pci/Makefile 2011-08-22 16:21:37.437981205 +0200 +@@ -18,6 +18,7 @@ + obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o + obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ + ops-bcm63xx.o ++obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o + + # + # These are still pretty much in the old state, watch, go blind. +diff -Nur linux-2.6.39.orig/arch/mips/pci/pci-ar71xx.c linux-2.6.39/arch/mips/pci/pci-ar71xx.c +--- linux-2.6.39.orig/arch/mips/pci/pci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/pci/pci-ar71xx.c 2011-08-06 09:32:37.098016752 +0200 +@@ -0,0 +1,415 @@ ++/* ++ * Atheros AR71xx PCI host controller driver ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ DBG("%s: %d packets sent out\n", ag->dev->name, sent); ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+ if ((ring->curr - ring->dirty) < AG71XX_TX_THRES_WAKEUP) -+ netif_wake_queue(ag->dev); ++#include ++#include + -+ return sent; -+} ++#undef DEBUG ++#ifdef DEBUG ++#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args) ++#else ++#define DBG(fmt, args...) ++#endif + -+static int ag71xx_rx_packets(struct ag71xx *ag, int limit) -+{ -+ struct net_device *dev = ag->dev; -+ struct ag71xx_ring *ring = &ag->rx_ring; -+ int done = 0; ++#define AR71XX_PCI_DELAY 100 /* msecs */ + -+ DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n", -+ dev->name, limit, ring->curr, ring->dirty); ++#if 0 ++#define PCI_IDSEL_BASE PCI_IDSEL_ADL_START ++#else ++#define PCI_IDSEL_BASE 0 ++#endif + -+ while (done < limit) { -+ unsigned int i = ring->curr % AG71XX_RX_RING_SIZE; -+ struct ag71xx_desc *desc = ring->buf[i].desc; -+ struct sk_buff *skb; -+ int pktlen; -+ int err = 0; ++static void __iomem *ar71xx_pcicfg_base; ++static DEFINE_SPINLOCK(ar71xx_pci_lock); ++static int ar71xx_pci_fixup_enable; + -+ if (ag71xx_desc_empty(desc)) -+ break; ++static inline void ar71xx_pci_delay(void) ++{ ++ mdelay(AR71XX_PCI_DELAY); ++} + -+ if ((ring->dirty + AG71XX_RX_RING_SIZE) == ring->curr) { -+ ag71xx_assert(0); -+ break; -+ } ++/* Byte lane enable bits */ ++static u8 ble_table[4][4] = { ++ {0x0, 0xf, 0xf, 0xf}, ++ {0xe, 0xd, 0xb, 0x7}, ++ {0xc, 0xf, 0x3, 0xf}, ++ {0xf, 0xf, 0xf, 0xf}, ++}; + -+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); ++static inline u32 ar71xx_pci_get_ble(int where, int size, int local) ++{ ++ u32 t; + -+ skb = ring->buf[i].skb; -+ pktlen = ag71xx_desc_pktlen(desc); -+ pktlen -= ETH_FCS_LEN; ++ t = ble_table[size & 3][where & 3]; ++ BUG_ON(t == 0xf); ++ t <<= (local) ? 20 : 4; ++ return t; ++} + -+ dma_unmap_single(&dev->dev, ring->buf[i].dma_addr, -+ AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE); ++static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn, ++ int where) ++{ ++ u32 ret; + -+ dev->last_rx = jiffies; -+ dev->stats.rx_packets++; -+ dev->stats.rx_bytes += pktlen; ++ if (!bus->number) { ++ /* type 0 */ ++ ret = (1 << (PCI_IDSEL_BASE + PCI_SLOT(devfn))) ++ | (PCI_FUNC(devfn) << 8) | (where & ~3); ++ } else { ++ /* type 1 */ ++ ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11) ++ | (PCI_FUNC(devfn) << 8) | (where & ~3) | 1; ++ } + -+ skb_put(skb, pktlen); -+ if (ag71xx_has_ar8216(ag)) -+ err = ag71xx_remove_ar8216_header(ag, skb, pktlen); ++ return ret; ++} + -+ if (err) { -+ dev->stats.rx_dropped++; -+ kfree_skb(skb); -+ } else { -+ skb->dev = dev; -+ skb->ip_summed = CHECKSUM_NONE; -+ if (ag->phy_dev) { -+ ag->phy_dev->netif_receive_skb(skb); -+ } else { -+ skb->protocol = eth_type_trans(skb, dev); -+ netif_receive_skb(skb); -+ } -+ } ++int ar71xx_pci_be_handler(int is_fixup) ++{ ++ void __iomem *base = ar71xx_pcicfg_base; ++ u32 pci_err; ++ u32 ahb_err; + -+ ring->buf[i].skb = NULL; -+ done++; ++ pci_err = __raw_readl(base + PCI_REG_PCI_ERR) & 3; ++ if (pci_err) { ++ if (!is_fixup) ++ printk(KERN_ALERT "PCI error %d at PCI addr 0x%x\n", ++ pci_err, ++ __raw_readl(base + PCI_REG_PCI_ERR_ADDR)); + -+ ring->curr++; ++ __raw_writel(pci_err, base + PCI_REG_PCI_ERR); + } + -+ ag71xx_ring_rx_refill(ag); ++ ahb_err = __raw_readl(base + PCI_REG_AHB_ERR) & 1; ++ if (ahb_err) { ++ if (!is_fixup) ++ printk(KERN_ALERT "AHB error at AHB address 0x%x\n", ++ __raw_readl(base + PCI_REG_AHB_ERR_ADDR)); + -+ DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n", -+ dev->name, ring->curr, ring->dirty, done); ++ __raw_writel(ahb_err, base + PCI_REG_AHB_ERR); ++ } + -+ return done; ++ return (ahb_err | pci_err) ? 1 : 0; +} + -+static int ag71xx_poll(struct napi_struct *napi, int limit) ++static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus, ++ unsigned int devfn, int where, int size, u32 cmd) +{ -+ struct ag71xx *ag = container_of(napi, struct ag71xx, napi); -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); -+ struct net_device *dev = ag->dev; -+ struct ag71xx_ring *rx_ring; -+ unsigned long flags; -+ u32 status; -+ int tx_done; -+ int rx_done; -+ -+ pdata->ddr_flush(); -+ tx_done = ag71xx_tx_packets(ag); -+ -+ DBG("%s: processing RX ring\n", dev->name); -+ rx_done = ag71xx_rx_packets(ag, limit); -+ -+ ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done); ++ void __iomem *base = ar71xx_pcicfg_base; ++ u32 addr; + -+ rx_ring = &ag->rx_ring; -+ if (rx_ring->buf[rx_ring->dirty % AG71XX_RX_RING_SIZE].skb == NULL) -+ goto oom; ++ addr = ar71xx_pci_bus_addr(bus, devfn, where); + -+ status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); -+ if (unlikely(status & RX_STATUS_OF)) { -+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF); -+ dev->stats.rx_fifo_errors++; ++ DBG("PCI: set cfgaddr: %02x:%02x.%01x/%02x:%01d, addr=%08x\n", ++ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), ++ where, size, addr); + -+ /* restart RX */ -+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); -+ } ++ __raw_writel(addr, base + PCI_REG_CFG_AD); ++ __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0), ++ base + PCI_REG_CFG_CBE); + -+ if (rx_done < limit) { -+ if (status & RX_STATUS_PR) -+ goto more; ++ return ar71xx_pci_be_handler(1); ++} + -+ status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); -+ if (status & TX_STATUS_PS) -+ goto more; ++static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *value) ++{ ++ void __iomem *base = ar71xx_pcicfg_base; ++ static u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; ++ unsigned long flags; ++ u32 data; ++ int retry = 0; ++ int ret; + -+ DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n", -+ dev->name, rx_done, tx_done, limit); ++ ret = PCIBIOS_SUCCESSFUL; + -+ napi_complete(napi); ++ DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d\n", bus->number, ++ PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); + -+ /* enable interrupts */ -+ spin_lock_irqsave(&ag->lock, flags); -+ ag71xx_int_enable(ag, AG71XX_INT_POLL); -+ spin_unlock_irqrestore(&ag->lock, flags); -+ return rx_done; -+ } ++retry: ++ spin_lock_irqsave(&ar71xx_pci_lock, flags); + -+ more: -+ DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n", -+ dev->name, rx_done, tx_done, limit); -+ return rx_done; ++ if (bus->number == 0 && devfn == 0) { ++ u32 t; + -+ oom: -+ if (netif_msg_rx_err(ag)) -+ printk(KERN_DEBUG "%s: out of memory\n", dev->name); ++ t = PCI_CRP_CMD_READ | (where & ~3); + -+ mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL); -+ napi_complete(napi); -+ return 0; -+} ++ __raw_writel(t, base + PCI_REG_CRP_AD_CBE); ++ data = __raw_readl(base + PCI_REG_CRP_RDDATA); + -+static irqreturn_t ag71xx_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = dev_id; -+ struct ag71xx *ag = netdev_priv(dev); -+ u32 status; ++ DBG("PCI: rd local cfg, ad_cbe:%08x, data:%08x\n", t, data); + -+ status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS); -+ ag71xx_dump_intr(ag, "raw", status); ++ } else { ++ int err; + -+ if (unlikely(!status)) -+ return IRQ_NONE; ++ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, ++ PCI_CFG_CMD_READ); + -+ if (unlikely(status & AG71XX_INT_ERR)) { -+ if (status & AG71XX_INT_TX_BE) { -+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE); -+ dev_err(&dev->dev, "TX BUS error\n"); -+ } -+ if (status & AG71XX_INT_RX_BE) { -+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE); -+ dev_err(&dev->dev, "RX BUS error\n"); ++ if (err == 0) { ++ data = __raw_readl(base + PCI_REG_CFG_RDDATA); ++ } else { ++ ret = PCIBIOS_DEVICE_NOT_FOUND; ++ data = ~0; + } + } + -+ if (likely(status & AG71XX_INT_POLL)) { -+ ag71xx_int_disable(ag, AG71XX_INT_POLL); -+ DBG("%s: enable polling mode\n", dev->name); -+ napi_schedule(&ag->napi); -+ } ++ spin_unlock_irqrestore(&ar71xx_pci_lock, flags); + -+ ag71xx_debugfs_update_int_stats(ag, status); ++ DBG("PCI: read config: data=%08x raw=%08x\n", ++ (data >> (8 * (where & 3))) & mask[size & 7], data); + -+ return IRQ_HANDLED; -+} ++ *value = (data >> (8 * (where & 3))) & mask[size & 7]; + -+static void ag71xx_set_multicast_list(struct net_device *dev) -+{ -+ /* TODO */ -+} ++ /* ++ * PCI controller bug: sometimes reads to the PCI_COMMAND register ++ * return 0xffff, even though the PCI trace shows the correct value. ++ * Work around this by retrying reads to this register ++ */ ++ if (where == PCI_COMMAND && (*value & 0xffff) == 0xffff && retry++ < 2) ++ goto retry; + -+#ifdef CONFIG_NET_POLL_CONTROLLER -+/* -+ * Polling 'interrupt' - used by things like netconsole to send skbs -+ * without having to re-enable interrupts. It's not called while -+ * the interrupt routine is executing. -+ */ -+static void ag71xx_netpoll(struct net_device *dev) -+{ -+ disable_irq(dev->irq); -+ ag71xx_interrupt(dev->irq, dev); -+ enable_irq(dev->irq); ++ return ret; +} -+#endif -+ -+static const struct net_device_ops ag71xx_netdev_ops = { -+ .ndo_open = ag71xx_open, -+ .ndo_stop = ag71xx_stop, -+ .ndo_start_xmit = ag71xx_hard_start_xmit, -+ .ndo_set_multicast_list = ag71xx_set_multicast_list, -+ .ndo_do_ioctl = ag71xx_do_ioctl, -+ .ndo_tx_timeout = ag71xx_tx_timeout, -+ .ndo_change_mtu = eth_change_mtu, -+ .ndo_set_mac_address = eth_mac_addr, -+ .ndo_validate_addr = eth_validate_addr, -+#ifdef CONFIG_NET_POLL_CONTROLLER -+ .ndo_poll_controller = ag71xx_netpoll, -+#endif -+}; + -+static int __init ag71xx_probe(struct platform_device *pdev) ++static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 value) +{ -+ struct net_device *dev; -+ struct resource *res; -+ struct ag71xx *ag; -+ struct ag71xx_platform_data *pdata; -+ int err; ++ void __iomem *base = ar71xx_pcicfg_base; ++ unsigned long flags; ++ int ret; + -+ pdata = pdev->dev.platform_data; -+ if (!pdata) { -+ dev_err(&pdev->dev, "no platform data specified\n"); -+ err = -ENXIO; -+ goto err_out; -+ } ++ DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d value=%08x\n", ++ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), ++ where, size, value); + -+ if (pdata->mii_bus_dev == NULL) { -+ dev_err(&pdev->dev, "no MII bus device specified\n"); -+ err = -EINVAL; -+ goto err_out; -+ } ++ value = value << (8 * (where & 3)); ++ ret = PCIBIOS_SUCCESSFUL; + -+ dev = alloc_etherdev(sizeof(*ag)); -+ if (!dev) { -+ dev_err(&pdev->dev, "alloc_etherdev failed\n"); -+ err = -ENOMEM; -+ goto err_out; -+ } ++ spin_lock_irqsave(&ar71xx_pci_lock, flags); ++ if (bus->number == 0 && devfn == 0) { ++ u32 t; + -+ SET_NETDEV_DEV(dev, &pdev->dev); ++ t = PCI_CRP_CMD_WRITE | (where & ~3); ++ t |= ar71xx_pci_get_ble(where, size, 1); + -+ ag = netdev_priv(dev); -+ ag->pdev = pdev; -+ ag->dev = dev; -+ ag->msg_enable = netif_msg_init(ag71xx_msg_level, -+ AG71XX_DEFAULT_MSG_ENABLE); -+ spin_lock_init(&ag->lock); ++ DBG("PCI: wr local cfg, ad_cbe:%08x, value:%08x\n", t, value); + -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base"); -+ if (!res) { -+ dev_err(&pdev->dev, "no mac_base resource found\n"); -+ err = -ENXIO; -+ goto err_out; -+ } ++ __raw_writel(t, base + PCI_REG_CRP_AD_CBE); ++ __raw_writel(value, base + PCI_REG_CRP_WRDATA); ++ } else { ++ int err; + -+ ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1); -+ if (!ag->mac_base) { -+ dev_err(&pdev->dev, "unable to ioremap mac_base\n"); -+ err = -ENOMEM; -+ goto err_free_dev; -+ } ++ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size, ++ PCI_CFG_CMD_WRITE); + -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mii_ctrl"); -+ if (!res) { -+ dev_err(&pdev->dev, "no mii_ctrl resource found\n"); -+ err = -ENXIO; -+ goto err_unmap_base; ++ if (err == 0) ++ __raw_writel(value, base + PCI_REG_CFG_WRDATA); ++ else ++ ret = PCIBIOS_DEVICE_NOT_FOUND; + } ++ spin_unlock_irqrestore(&ar71xx_pci_lock, flags); + -+ ag->mii_ctrl = ioremap_nocache(res->start, res->end - res->start + 1); -+ if (!ag->mii_ctrl) { -+ dev_err(&pdev->dev, "unable to ioremap mii_ctrl\n"); -+ err = -ENOMEM; -+ goto err_unmap_base; -+ } ++ return ret; ++} + -+ dev->irq = platform_get_irq(pdev, 0); -+ err = request_irq(dev->irq, ag71xx_interrupt, -+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM, -+ dev->name, dev); -+ if (err) { -+ dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq); -+ goto err_unmap_mii_ctrl; -+ } ++static void ar71xx_pci_fixup(struct pci_dev *dev) ++{ ++ u32 t; + -+ dev->base_addr = (unsigned long)ag->mac_base; -+ dev->netdev_ops = &ag71xx_netdev_ops; -+ dev->ethtool_ops = &ag71xx_ethtool_ops; ++ if (!ar71xx_pci_fixup_enable) ++ return; + -+ INIT_WORK(&ag->restart_work, ag71xx_restart_work_func); ++ if (dev->bus->number != 0 || dev->devfn != 0) ++ return; + -+ init_timer(&ag->oom_timer); -+ ag->oom_timer.data = (unsigned long) dev; -+ ag->oom_timer.function = ag71xx_oom_timer_handler; ++ DBG("PCI: fixup host controller %s (%04x:%04x)\n", pci_name(dev), ++ dev->vendor, dev->device); + -+ memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN); ++ /* setup COMMAND register */ ++ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE ++ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK; + -+ netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT); ++ pci_write_config_word(dev, PCI_COMMAND, t); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar71xx_pci_fixup); + -+ err = register_netdev(dev); -+ if (err) { -+ dev_err(&pdev->dev, "unable to register net device\n"); -+ goto err_free_irq; ++int __init ar71xx_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, ++ uint8_t pin) ++{ ++ int irq = -1; ++ int i; ++ ++ slot -= PCI_IDSEL_ADL_START - PCI_IDSEL_BASE; ++ ++ for (i = 0; i < ar71xx_pci_nr_irqs; i++) { ++ struct ar71xx_pci_irq *entry; ++ ++ entry = &ar71xx_pci_irq_map[i]; ++ if (entry->slot == slot && entry->pin == pin) { ++ irq = entry->irq; ++ break; ++ } + } + -+ printk(KERN_INFO "%s: Atheros AG71xx at 0x%08lx, irq %d\n", -+ dev->name, dev->base_addr, dev->irq); ++ if (irq < 0) { ++ printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n", ++ pin, pci_name((struct pci_dev *)dev)); ++ } else { ++ printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n", ++ irq, pin, pci_name((struct pci_dev *)dev)); ++ } + -+ ag71xx_dump_regs(ag); ++ return irq; ++} + -+ ag71xx_hw_init(ag); ++static struct pci_ops ar71xx_pci_ops = { ++ .read = ar71xx_pci_read_config, ++ .write = ar71xx_pci_write_config, ++}; + -+ ag71xx_dump_regs(ag); ++static struct resource ar71xx_pci_io_resource = { ++ .name = "PCI IO space", ++ .start = 0, ++ .end = 0, ++ .flags = IORESOURCE_IO, ++}; + -+ err = ag71xx_phy_connect(ag); -+ if (err) -+ goto err_unregister_netdev; ++static struct resource ar71xx_pci_mem_resource = { ++ .name = "PCI memory space", ++ .start = AR71XX_PCI_MEM_BASE, ++ .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, ++ .flags = IORESOURCE_MEM ++}; + -+ err = ag71xx_debugfs_init(ag); -+ if (err) -+ goto err_phy_disconnect; ++static struct pci_controller ar71xx_pci_controller = { ++ .pci_ops = &ar71xx_pci_ops, ++ .mem_resource = &ar71xx_pci_mem_resource, ++ .io_resource = &ar71xx_pci_io_resource, ++}; + -+ platform_set_drvdata(pdev, dev); ++static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc) ++{ ++ void __iomem *base = ar71xx_reset_base; ++ u32 pending; + -+ return 0; ++ pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) & ++ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); + -+ err_phy_disconnect: -+ ag71xx_phy_disconnect(ag); -+ err_unregister_netdev: -+ unregister_netdev(dev); -+ err_free_irq: -+ free_irq(dev->irq, dev); -+ err_unmap_mii_ctrl: -+ iounmap(ag->mii_ctrl); -+ err_unmap_base: -+ iounmap(ag->mac_base); -+ err_free_dev: -+ kfree(dev); -+ err_out: -+ platform_set_drvdata(pdev, NULL); -+ return err; ++ if (pending & PCI_INT_DEV0) ++ generic_handle_irq(AR71XX_PCI_IRQ_DEV0); ++ ++ else if (pending & PCI_INT_DEV1) ++ generic_handle_irq(AR71XX_PCI_IRQ_DEV1); ++ ++ else if (pending & PCI_INT_DEV2) ++ generic_handle_irq(AR71XX_PCI_IRQ_DEV2); ++ ++ else if (pending & PCI_INT_CORE) ++ generic_handle_irq(AR71XX_PCI_IRQ_CORE); ++ ++ else ++ spurious_interrupt(); +} + -+static int __exit ag71xx_remove(struct platform_device *pdev) ++static void ar71xx_pci_irq_unmask(struct irq_data *d) +{ -+ struct net_device *dev = platform_get_drvdata(pdev); ++ unsigned int irq = d->irq - AR71XX_PCI_IRQ_BASE; ++ void __iomem *base = ar71xx_reset_base; ++ u32 t; + -+ if (dev) { -+ struct ag71xx *ag = netdev_priv(dev); ++ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); + -+ ag71xx_debugfs_exit(ag); -+ ag71xx_phy_disconnect(ag); -+ unregister_netdev(dev); -+ free_irq(dev->irq, dev); -+ iounmap(ag->mii_ctrl); -+ iounmap(ag->mac_base); -+ kfree(dev); -+ platform_set_drvdata(pdev, NULL); -+ } ++ /* flush write */ ++ (void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++} + -+ return 0; ++static void ar71xx_pci_irq_mask(struct irq_data *d) ++{ ++ unsigned int irq = d->irq - AR71XX_PCI_IRQ_BASE; ++ void __iomem *base = ar71xx_reset_base; ++ u32 t; ++ ++ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ ++ /* flush write */ ++ (void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE); +} + -+static struct platform_driver ag71xx_driver = { -+ .probe = ag71xx_probe, -+ .remove = __exit_p(ag71xx_remove), -+ .driver = { -+ .name = AG71XX_DRV_NAME, -+ } ++static struct irq_chip ar71xx_pci_irq_chip = { ++ .name = "AR71XX PCI ", ++ .irq_mask = ar71xx_pci_irq_mask, ++ .irq_unmask = ar71xx_pci_irq_unmask, ++ .irq_mask_ack = ar71xx_pci_irq_mask, +}; + -+static int __init ag71xx_module_init(void) ++static void __init ar71xx_pci_irq_init(void) +{ -+ int ret; -+ -+ ret = ag71xx_debugfs_root_init(); -+ if (ret) -+ goto err_out; -+ -+ ret = ag71xx_mdio_driver_init(); -+ if (ret) -+ goto err_debugfs_exit; ++ void __iomem *base = ar71xx_reset_base; ++ int i; + -+ ret = platform_driver_register(&ag71xx_driver); -+ if (ret) -+ goto err_mdio_exit; ++ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE); ++ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS); + -+ return 0; ++ for (i = AR71XX_PCI_IRQ_BASE; ++ i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip, ++ handle_level_irq); + -+ err_mdio_exit: -+ ag71xx_mdio_driver_exit(); -+ err_debugfs_exit: -+ ag71xx_debugfs_root_exit(); -+ err_out: -+ return ret; ++ irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar71xx_pci_irq_handler); +} + -+static void __exit ag71xx_module_exit(void) ++int __init ar71xx_pcibios_init(void) +{ -+ platform_driver_unregister(&ag71xx_driver); -+ ag71xx_mdio_driver_exit(); -+ ag71xx_debugfs_root_exit(); -+} ++ void __iomem *ddr_base = ar71xx_ddr_base; + -+module_init(ag71xx_module_init); -+module_exit(ag71xx_module_exit); ++ ar71xx_device_stop(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE); ++ ar71xx_pci_delay(); + -+MODULE_VERSION(AG71XX_DRV_VERSION); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_AUTHOR("Imre Kaloz "); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:" AG71XX_DRV_NAME); -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_mdio.c linux-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c ---- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_mdio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,243 @@ ++ ar71xx_device_start(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE); ++ ar71xx_pci_delay(); ++ ++ ar71xx_pcicfg_base = ioremap_nocache(AR71XX_PCI_CFG_BASE, ++ AR71XX_PCI_CFG_SIZE); ++ if (ar71xx_pcicfg_base == NULL) ++ return -ENOMEM; ++ ++ __raw_writel(PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0); ++ __raw_writel(PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1); ++ __raw_writel(PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2); ++ __raw_writel(PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3); ++ __raw_writel(PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4); ++ __raw_writel(PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5); ++ __raw_writel(PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6); ++ __raw_writel(PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7); ++ ++ ar71xx_pci_delay(); ++ ++ /* clear bus errors */ ++ (void)ar71xx_pci_be_handler(1); ++ ++ ar71xx_pci_fixup_enable = 1; ++ ar71xx_pci_irq_init(); ++ register_pci_controller(&ar71xx_pci_controller); ++ ++ return 0; ++} +diff -Nur linux-2.6.39.orig/arch/mips/pci/pci-ar724x.c linux-2.6.39/arch/mips/pci/pci-ar724x.c +--- linux-2.6.39.orig/arch/mips/pci/pci-ar724x.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/pci/pci-ar724x.c 2011-08-06 09:32:37.088017079 +0200 +@@ -0,0 +1,389 @@ +/* -+ * Atheros AR71xx built-in ethernet mac driver ++ * Atheros AR724x PCI host controller driver + * -+ * Copyright (C) 2008-2010 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2009-2010 Gabor Juhos + * -+ * Based on Atheros' AG7100 driver ++ * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + -+#include "ag71xx.h" ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+#define AG71XX_MDIO_RETRY 1000 -+#define AG71XX_MDIO_DELAY 5 ++#include ++#include + -+static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg, -+ u32 value) -+{ -+ void __iomem *r; ++#undef DEBUG ++#ifdef DEBUG ++#define DBG(fmt, args...) printk(KERN_INFO fmt, ## args) ++#else ++#define DBG(fmt, args...) ++#endif + -+ r = am->mdio_base + reg; -+ __raw_writel(value, r); ++static void __iomem *ar724x_pci_localcfg_base; ++static void __iomem *ar724x_pci_devcfg_base; ++static void __iomem *ar724x_pci_ctrl_base; ++static int ar724x_pci_fixup_enable; + -+ /* flush write */ -+ (void) __raw_readl(r); -+} ++static DEFINE_SPINLOCK(ar724x_pci_lock); + -+static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg) ++static void ar724x_pci_read(void __iomem *base, int where, int size, u32 *value) +{ -+ return __raw_readl(am->mdio_base + reg); -+} ++ unsigned long flags; ++ u32 data; + -+static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am) -+{ -+ DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n", -+ am->mii_bus->name, -+ ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG), -+ ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD), -+ ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR)); -+ DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n", -+ am->mii_bus->name, -+ ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL), -+ ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS), -+ ag71xx_mdio_rr(am, AG71XX_REG_MII_IND)); ++ spin_lock_irqsave(&ar724x_pci_lock, flags); ++ data = __raw_readl(base + (where & ~3)); ++ ++ switch (size) { ++ case 1: ++ if (where & 1) ++ data >>= 8; ++ if (where & 2) ++ data >>= 16; ++ data &= 0xFF; ++ break; ++ case 2: ++ if (where & 2) ++ data >>= 16; ++ data &= 0xFFFF; ++ break; ++ } ++ ++ *value = data; ++ spin_unlock_irqrestore(&ar724x_pci_lock, flags); +} + -+static int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg) ++static void ar724x_pci_write(void __iomem *base, int where, int size, u32 value) +{ -+ int ret; -+ int i; ++ unsigned long flags; ++ u32 data; ++ int s; + -+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); -+ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, -+ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); -+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ); ++ spin_lock_irqsave(&ar724x_pci_lock, flags); ++ data = __raw_readl(base + (where & ~3)); + -+ i = AG71XX_MDIO_RETRY; -+ while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) { -+ if (i-- == 0) { -+ printk(KERN_ERR "%s: mii_read timed out\n", -+ am->mii_bus->name); -+ ret = 0xffff; -+ goto out; -+ } -+ udelay(AG71XX_MDIO_DELAY); ++ switch (size) { ++ case 1: ++ s = ((where & 3) << 3); ++ data &= ~(0xFF << s); ++ data |= ((value & 0xFF) << s); ++ break; ++ case 2: ++ s = ((where & 2) << 3); ++ data &= ~(0xFFFF << s); ++ data |= ((value & 0xFFFF) << s); ++ break; ++ case 4: ++ data = value; ++ break; + } + -+ ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff; -+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); -+ -+ DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret); -+ -+ out: -+ return ret; ++ __raw_writel(data, base + (where & ~3)); ++ /* flush write */ ++ (void)__raw_readl(base + (where & ~3)); ++ spin_unlock_irqrestore(&ar724x_pci_lock, flags); +} + -+static void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, -+ int addr, int reg, u16 val) ++static int ar724x_pci_read_config(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *value) +{ -+ int i; + -+ DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val); ++ if (bus->number != 0 || devfn != 0) ++ return PCIBIOS_DEVICE_NOT_FOUND; + -+ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, -+ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); -+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val); ++ ar724x_pci_read(ar724x_pci_devcfg_base, where, size, value); + -+ i = AG71XX_MDIO_RETRY; -+ while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) { -+ if (i-- == 0) { -+ printk(KERN_ERR "%s: mii_write timed out\n", -+ am->mii_bus->name); -+ break; -+ } -+ udelay(AG71XX_MDIO_DELAY); ++ DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d, value=%08x\n", ++ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), ++ where, size, *value); ++ ++ /* ++ * WAR for BAR issue - We are unable to access the PCI device space ++ * if we set the BAR with proper base address ++ */ ++ if ((where == 0x10) && (size == 4)) { ++ u32 val; ++ val = (ar71xx_soc == AR71XX_SOC_AR7240) ? 0xffff : 0x1000ffff; ++ ar724x_pci_write(ar724x_pci_devcfg_base, where, size, val); + } ++ ++ return PCIBIOS_SUCCESSFUL; +} + -+static int ag71xx_mdio_reset(struct mii_bus *bus) ++static int ar724x_pci_write_config(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 value) +{ -+ struct ag71xx_mdio *am = bus->priv; -+ u32 t; -+ -+ if (am->pdata->is_ar7240) -+ t = MII_CFG_CLK_DIV_6; -+ else -+ t = MII_CFG_CLK_DIV_28; ++ if (bus->number != 0 || devfn != 0) ++ return PCIBIOS_DEVICE_NOT_FOUND; + -+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET); -+ udelay(100); ++ DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d, value=%08x\n", ++ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), ++ where, size, value); + -+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t); -+ udelay(100); ++ ar724x_pci_write(ar724x_pci_devcfg_base, where, size, value); + -+ return 0; ++ return PCIBIOS_SUCCESSFUL; +} + -+static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg) ++static void ar724x_pci_fixup(struct pci_dev *dev) +{ -+ struct ag71xx_mdio *am = bus->priv; ++ u16 cmd; + -+ return ag71xx_mdio_mii_read(am, addr, reg); -+} ++ if (!ar724x_pci_fixup_enable) ++ return; + -+static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val) -+{ -+ struct ag71xx_mdio *am = bus->priv; ++ if (dev->bus->number != 0 || dev->devfn != 0) ++ return; + -+ ag71xx_mdio_mii_write(am, addr, reg, val); -+ return 0; ++ /* setup COMMAND register */ ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | ++ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | ++ PCI_COMMAND_FAST_BACK; ++ ++ pci_write_config_word(dev, PCI_COMMAND, cmd); +} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar724x_pci_fixup); + -+static int __init ag71xx_mdio_probe(struct platform_device *pdev) ++int __init ar724x_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, ++ uint8_t pin) +{ -+ struct ag71xx_mdio_platform_data *pdata; -+ struct ag71xx_mdio *am; -+ struct resource *res; ++ int irq = -1; + int i; -+ int err; -+ -+ pdata = pdev->dev.platform_data; -+ if (!pdata) { -+ dev_err(&pdev->dev, "no platform data specified\n"); -+ return -EINVAL; -+ } -+ -+ am = kzalloc(sizeof(*am), GFP_KERNEL); -+ if (!am) { -+ err = -ENOMEM; -+ goto err_out; -+ } + -+ am->pdata = pdata; ++ for (i = 0; i < ar71xx_pci_nr_irqs; i++) { ++ struct ar71xx_pci_irq *entry; ++ entry = &ar71xx_pci_irq_map[i]; + -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "no iomem resource found\n"); -+ err = -ENXIO; -+ goto err_out; ++ if (entry->slot == slot && entry->pin == pin) { ++ irq = entry->irq; ++ break; ++ } + } + -+ am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1); -+ if (!am->mdio_base) { -+ dev_err(&pdev->dev, "unable to ioremap registers\n"); -+ err = -ENOMEM; -+ goto err_free_mdio; -+ } ++ if (irq < 0) ++ printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n", ++ pin, pci_name((struct pci_dev *)dev)); ++ else ++ printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n", ++ irq, pin, pci_name((struct pci_dev *)dev)); + -+ am->mii_bus = mdiobus_alloc(); -+ if (am->mii_bus == NULL) { -+ err = -ENOMEM; -+ goto err_iounmap; -+ } ++ return irq; ++} + -+ am->mii_bus->name = "ag71xx_mdio"; -+ am->mii_bus->read = ag71xx_mdio_read; -+ am->mii_bus->write = ag71xx_mdio_write; -+ am->mii_bus->reset = ag71xx_mdio_reset; -+ am->mii_bus->irq = am->mii_irq; -+ am->mii_bus->priv = am; -+ am->mii_bus->parent = &pdev->dev; -+ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev)); -+ am->mii_bus->phy_mask = pdata->phy_mask; ++static struct pci_ops ar724x_pci_ops = { ++ .read = ar724x_pci_read_config, ++ .write = ar724x_pci_write_config, ++}; + -+ for (i = 0; i < PHY_MAX_ADDR; i++) -+ am->mii_irq[i] = PHY_POLL; ++static struct resource ar724x_pci_io_resource = { ++ .name = "PCI IO space", ++ .start = 0, ++ .end = 0, ++ .flags = IORESOURCE_IO, ++}; + -+ ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0); ++static struct resource ar724x_pci_mem_resource = { ++ .name = "PCI memory space", ++ .start = AR71XX_PCI_MEM_BASE, ++ .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1, ++ .flags = IORESOURCE_MEM ++}; + -+ err = mdiobus_register(am->mii_bus); -+ if (err) -+ goto err_free_bus; -+ -+ ag71xx_mdio_dump_regs(am); ++static struct pci_controller ar724x_pci_controller = { ++ .pci_ops = &ar724x_pci_ops, ++ .mem_resource = &ar724x_pci_mem_resource, ++ .io_resource = &ar724x_pci_io_resource, ++}; + -+ platform_set_drvdata(pdev, am); -+ return 0; ++static void __init ar724x_pci_reset(void) ++{ ++ ar71xx_device_stop(AR724X_RESET_PCIE); ++ ar71xx_device_stop(AR724X_RESET_PCIE_PHY); ++ ar71xx_device_stop(AR724X_RESET_PCIE_PHY_SERIAL); ++ udelay(100); + -+ err_free_bus: -+ mdiobus_free(am->mii_bus); -+ err_iounmap: -+ iounmap(am->mdio_base); -+ err_free_mdio: -+ kfree(am); -+ err_out: -+ return err; ++ ar71xx_device_start(AR724X_RESET_PCIE_PHY_SERIAL); ++ udelay(100); ++ ar71xx_device_start(AR724X_RESET_PCIE_PHY); ++ ar71xx_device_start(AR724X_RESET_PCIE); +} + -+static int __exit ag71xx_mdio_remove(struct platform_device *pdev) ++static int __init ar724x_pci_setup(void) +{ -+ struct ag71xx_mdio *am = platform_get_drvdata(pdev); ++ void __iomem *base = ar724x_pci_ctrl_base; ++ u32 t; + -+ if (am) { -+ mdiobus_unregister(am->mii_bus); -+ mdiobus_free(am->mii_bus); -+ iounmap(am->mdio_base); -+ kfree(am); -+ platform_set_drvdata(pdev, NULL); ++ /* setup COMMAND register */ ++ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | ++ PCI_COMMAND_PARITY|PCI_COMMAND_SERR|PCI_COMMAND_FAST_BACK; ++ ++ ar724x_pci_write(ar724x_pci_localcfg_base, PCI_COMMAND, 4, t); ++ ar724x_pci_write(ar724x_pci_localcfg_base, 0x20, 4, 0x1ff01000); ++ ar724x_pci_write(ar724x_pci_localcfg_base, 0x24, 4, 0x1ff01000); ++ ++ t = __raw_readl(base + AR724X_PCI_REG_RESET); ++ if (t != 0x7) { ++ udelay(100000); ++ __raw_writel(0, base + AR724X_PCI_REG_RESET); ++ udelay(100); ++ __raw_writel(4, base + AR724X_PCI_REG_RESET); ++ udelay(100000); + } + -+ return 0; -+} ++ if (ar71xx_soc == AR71XX_SOC_AR7240) ++ t = AR724X_PCI_APP_LTSSM_ENABLE; ++ else ++ t = 0x1ffc1; ++ __raw_writel(t, base + AR724X_PCI_REG_APP); ++ /* flush write */ ++ (void) __raw_readl(base + AR724X_PCI_REG_APP); ++ udelay(1000); + -+static struct platform_driver ag71xx_mdio_driver = { -+ .probe = ag71xx_mdio_probe, -+ .remove = __exit_p(ag71xx_mdio_remove), -+ .driver = { -+ .name = "ag71xx-mdio", ++ t = __raw_readl(base + AR724X_PCI_REG_RESET); ++ if ((t & AR724X_PCI_RESET_LINK_UP) == 0x0) { ++ printk(KERN_WARNING "PCI: no PCIe module found\n"); ++ return -ENODEV; + } -+}; + -+int ag71xx_mdio_driver_init(void) -+{ -+ return platform_driver_register(&ag71xx_mdio_driver); -+} ++ if (ar71xx_soc == AR71XX_SOC_AR7241 || ++ ar71xx_soc == AR71XX_SOC_AR7242) { ++ t = __raw_readl(base + AR724X_PCI_REG_APP); ++ t |= BIT(16); ++ __raw_writel(t, base + AR724X_PCI_REG_APP); ++ } + -+void ag71xx_mdio_driver_exit(void) -+{ -+ platform_driver_unregister(&ag71xx_mdio_driver); ++ return 0; +} -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_phy.c linux-2.6.39/drivers/net/ag71xx/ag71xx_phy.c ---- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_phy.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_phy.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,213 @@ -+/* -+ * Atheros AR71xx built-in ethernet mac driver -+ * -+ * Copyright (C) 2008-2010 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Based on Atheros' AG7100 driver -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "ag71xx.h" + -+static void ag71xx_phy_link_adjust(struct net_device *dev) ++static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc) +{ -+ struct ag71xx *ag = netdev_priv(dev); -+ struct phy_device *phydev = ag->phy_dev; -+ unsigned long flags; -+ int status_change = 0; -+ -+ spin_lock_irqsave(&ag->lock, flags); -+ -+ if (phydev->link) { -+ if (ag->duplex != phydev->duplex -+ || ag->speed != phydev->speed) { -+ status_change = 1; -+ } -+ } -+ -+ if (phydev->link != ag->link) -+ status_change = 1; ++ void __iomem *base = ar724x_pci_ctrl_base; ++ u32 pending; + -+ ag->link = phydev->link; -+ ag->duplex = phydev->duplex; -+ ag->speed = phydev->speed; ++ pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) & ++ __raw_readl(base + AR724X_PCI_REG_INT_MASK); + -+ if (status_change) -+ ag71xx_link_adjust(ag); ++ if (pending & AR724X_PCI_INT_DEV0) ++ generic_handle_irq(AR71XX_PCI_IRQ_DEV0); + -+ spin_unlock_irqrestore(&ag->lock, flags); ++ else ++ spurious_interrupt(); +} + -+void ag71xx_phy_start(struct ag71xx *ag) ++static void ar724x_pci_irq_unmask(struct irq_data *d) +{ -+ if (ag->phy_dev) { -+ phy_start(ag->phy_dev); -+ } else { -+ ag->link = 1; -+ ag71xx_link_adjust(ag); ++ void __iomem *base = ar724x_pci_ctrl_base; ++ u32 t; ++ ++ switch (d->irq) { ++ case AR71XX_PCI_IRQ_DEV0: ++ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ __raw_writel(t | AR724X_PCI_INT_DEV0, ++ base + AR724X_PCI_REG_INT_MASK); ++ /* flush write */ ++ (void) __raw_readl(base + AR724X_PCI_REG_INT_MASK); + } +} + -+void ag71xx_phy_stop(struct ag71xx *ag) ++static void ar724x_pci_irq_mask(struct irq_data *d) +{ -+ if (ag->phy_dev) { -+ phy_stop(ag->phy_dev); -+ } else { -+ ag->link = 0; -+ ag71xx_link_adjust(ag); ++ void __iomem *base = ar724x_pci_ctrl_base; ++ u32 t; ++ ++ switch (d->irq) { ++ case AR71XX_PCI_IRQ_DEV0: ++ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ __raw_writel(t & ~AR724X_PCI_INT_DEV0, ++ base + AR724X_PCI_REG_INT_MASK); ++ ++ /* flush write */ ++ (void) __raw_readl(base + AR724X_PCI_REG_INT_MASK); ++ ++ t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS); ++ __raw_writel(t | AR724X_PCI_INT_DEV0, ++ base + AR724X_PCI_REG_INT_STATUS); ++ ++ /* flush write */ ++ (void) __raw_readl(base + AR724X_PCI_REG_INT_STATUS); + } +} + -+static int ag71xx_phy_connect_fixed(struct ag71xx *ag) ++static struct irq_chip ar724x_pci_irq_chip = { ++ .name = "AR724X PCI ", ++ .irq_mask = ar724x_pci_irq_mask, ++ .irq_unmask = ar724x_pci_irq_unmask, ++ .irq_mask_ack = ar724x_pci_irq_mask, ++}; ++ ++static void __init ar724x_pci_irq_init(void) +{ -+ struct net_device *dev = ag->dev; -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); -+ int ret = 0; ++ void __iomem *base = ar724x_pci_ctrl_base; ++ u32 t; ++ int i; + -+ /* use fixed settings */ -+ switch (pdata->speed) { -+ case SPEED_10: -+ case SPEED_100: -+ case SPEED_1000: -+ break; -+ default: -+ printk(KERN_ERR "%s: invalid speed specified\n", dev->name); -+ ret = -EINVAL; -+ break; ++ t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE); ++ if (t & (AR724X_RESET_PCIE | AR724X_RESET_PCIE_PHY | ++ AR724X_RESET_PCIE_PHY_SERIAL)) { ++ return; + } + -+ printk(KERN_DEBUG "%s: using fixed link parameters\n", dev->name); ++ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK); ++ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS); + -+ ag->duplex = pdata->duplex; -+ ag->speed = pdata->speed; ++ for (i = AR71XX_PCI_IRQ_BASE; ++ i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) ++ irq_set_chip_and_handler(i, &ar724x_pci_irq_chip, ++ handle_level_irq); + -+ return ret; ++ irq_set_chained_handler(AR71XX_CPU_IRQ_IP2, ar724x_pci_irq_handler); +} + -+static int ag71xx_phy_connect_multi(struct ag71xx *ag) ++int __init ar724x_pcibios_init(void) +{ -+ struct net_device *dev = ag->dev; -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); -+ struct phy_device *phydev = NULL; -+ int phy_addr; -+ int ret = 0; ++ int ret = -ENOMEM; + -+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { -+ if (!(pdata->phy_mask & (1 << phy_addr))) -+ continue; ++ ar724x_pci_localcfg_base = ioremap_nocache(AR724X_PCI_CRP_BASE, ++ AR724X_PCI_CRP_SIZE); ++ if (ar724x_pci_localcfg_base == NULL) ++ goto err; + -+ if (ag->mii_bus->phy_map[phy_addr] == NULL) -+ continue; ++ ar724x_pci_devcfg_base = ioremap_nocache(AR724X_PCI_CFG_BASE, ++ AR724X_PCI_CFG_SIZE); ++ if (ar724x_pci_devcfg_base == NULL) ++ goto err_unmap_localcfg; + -+ DBG("%s: PHY found at %s, uid=%08x\n", -+ dev->name, -+ dev_name(&ag->mii_bus->phy_map[phy_addr]->dev), -+ ag->mii_bus->phy_map[phy_addr]->phy_id); ++ ar724x_pci_ctrl_base = ioremap_nocache(AR724X_PCI_CTRL_BASE, ++ AR724X_PCI_CTRL_SIZE); ++ if (ar724x_pci_ctrl_base == NULL) ++ goto err_unmap_devcfg; + -+ if (phydev == NULL) -+ phydev = ag->mii_bus->phy_map[phy_addr]; -+ } ++ ar724x_pci_reset(); ++ ret = ar724x_pci_setup(); ++ if (ret) ++ goto err_unmap_ctrl; + -+ if (!phydev) { -+ printk(KERN_ERR "%s: no PHY found with phy_mask=%08x\n", -+ dev->name, pdata->phy_mask); -+ return -ENODEV; -+ } ++ ar724x_pci_fixup_enable = 1; ++ ar724x_pci_irq_init(); ++ register_pci_controller(&ar724x_pci_controller); + -+ ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev), -+ &ag71xx_phy_link_adjust, 0, -+ pdata->phy_if_mode); -+ -+ if (IS_ERR(ag->phy_dev)) { -+ printk(KERN_ERR "%s: could not connect to PHY at %s\n", -+ dev->name, dev_name(&phydev->dev)); -+ return PTR_ERR(ag->phy_dev); -+ } ++ return 0; + -+ /* mask with MAC supported features */ -+ if (pdata->has_gbit) -+ phydev->supported &= PHY_GBIT_FEATURES; -+ else -+ phydev->supported &= PHY_BASIC_FEATURES; ++err_unmap_ctrl: ++ iounmap(ar724x_pci_ctrl_base); ++err_unmap_devcfg: ++ iounmap(ar724x_pci_devcfg_base); ++err_unmap_localcfg: ++ iounmap(ar724x_pci_localcfg_base); ++err: ++ return ret; ++} +diff -Nur linux-2.6.39.orig/drivers/gpio/nxp_74hc153.c linux-2.6.39/drivers/gpio/nxp_74hc153.c +--- linux-2.6.39.orig/drivers/gpio/nxp_74hc153.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/gpio/nxp_74hc153.c 2011-04-27 12:19:22.327664626 +0200 +@@ -0,0 +1,247 @@ ++/* ++ * NXP 74HC153 - Dual 4-input multiplexer GPIO driver ++ * ++ * Copyright (C) 2010 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ + -+ phydev->advertising = phydev->supported; ++#include ++#include ++#include ++#include ++#include ++#include + -+ printk(KERN_DEBUG "%s: connected to PHY at %s [uid=%08x, driver=%s]\n", -+ dev->name, dev_name(&phydev->dev), -+ phydev->phy_id, phydev->drv->name); ++#define NXP_74HC153_NUM_GPIOS 8 ++#define NXP_74HC153_S0_MASK 0x1 ++#define NXP_74HC153_S1_MASK 0x2 ++#define NXP_74HC153_BANK_MASK 0x4 + -+ ag->link = 0; -+ ag->speed = 0; -+ ag->duplex = -1; ++struct nxp_74hc153_chip { ++ struct device *parent; ++ struct gpio_chip gpio_chip; ++ struct mutex lock; ++}; + -+ return ret; ++static struct nxp_74hc153_chip *gpio_to_nxp(struct gpio_chip *gc) ++{ ++ return container_of(gc, struct nxp_74hc153_chip, gpio_chip); +} + -+static int dev_is_class(struct device *dev, void *class) ++static int nxp_74hc153_direction_input(struct gpio_chip *gc, unsigned offset) +{ -+ if (dev->class != NULL && !strcmp(dev->class->name, class)) -+ return 1; -+ + return 0; +} + -+static struct device *dev_find_class(struct device *parent, char *class) ++static int nxp_74hc153_direction_output(struct gpio_chip *gc, ++ unsigned offset, int val) +{ -+ if (dev_is_class(parent, class)) { -+ get_device(parent); -+ return parent; -+ } -+ -+ return device_find_child(parent, class, dev_is_class); ++ return -EINVAL; +} + -+static struct mii_bus *dev_to_mii_bus(struct device *dev) ++static int nxp_74hc153_get_value(struct gpio_chip *gc, unsigned offset) +{ -+ struct device *d; ++ struct nxp_74hc153_chip *nxp; ++ struct nxp_74hc153_platform_data *pdata; ++ unsigned s0; ++ unsigned s1; ++ unsigned pin; ++ int ret; + -+ d = dev_find_class(dev, "mdio_bus"); -+ if (d != NULL) { -+ struct mii_bus *bus; ++ nxp = gpio_to_nxp(gc); ++ pdata = nxp->parent->platform_data; + -+ bus = to_mii_bus(d); -+ put_device(d); ++ s0 = !!(offset & NXP_74HC153_S0_MASK); ++ s1 = !!(offset & NXP_74HC153_S1_MASK); ++ pin = (offset & NXP_74HC153_BANK_MASK) ? pdata->gpio_pin_2y ++ : pdata->gpio_pin_1y; + -+ return bus; -+ } ++ mutex_lock(&nxp->lock); ++ gpio_set_value(pdata->gpio_pin_s0, s0); ++ gpio_set_value(pdata->gpio_pin_s1, s1); ++ ret = gpio_get_value(pin); ++ mutex_unlock(&nxp->lock); + -+ return NULL; ++ return ret; +} + -+int ag71xx_phy_connect(struct ag71xx *ag) ++static void nxp_74hc153_set_value(struct gpio_chip *gc, ++ unsigned offset, int val) +{ -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ /* not supported */ ++} + -+ ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev); -+ if (ag->mii_bus == NULL) { -+ printk(KERN_ERR "%s: unable to find MII bus on device '%s'\n", -+ ag->dev->name, dev_name(pdata->mii_bus_dev)); -+ return -ENODEV; -+ } ++static int __devinit nxp_74hc153_probe(struct platform_device *pdev) ++{ ++ struct nxp_74hc153_platform_data *pdata; ++ struct nxp_74hc153_chip *nxp; ++ struct gpio_chip *gc; ++ int err; + -+ /* Reset the mdio bus explicitly */ -+ if (ag->mii_bus->reset) { -+ mutex_lock(&ag->mii_bus->mdio_lock); -+ ag->mii_bus->reset(ag->mii_bus); -+ mutex_unlock(&ag->mii_bus->mdio_lock); ++ pdata = pdev->dev.platform_data; ++ if (pdata == NULL) { ++ dev_dbg(&pdev->dev, "no platform data specified\n"); ++ return -EINVAL; + } + -+ if (pdata->phy_mask) -+ return ag71xx_phy_connect_multi(ag); ++ nxp = kzalloc(sizeof(struct nxp_74hc153_chip), GFP_KERNEL); ++ if (nxp == NULL) { ++ dev_err(&pdev->dev, "no memory for private data\n"); ++ return -ENOMEM; ++ } + -+ return ag71xx_phy_connect_fixed(ag); -+} ++ err = gpio_request(pdata->gpio_pin_s0, dev_name(&pdev->dev)); ++ if (err) { ++ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", ++ pdata->gpio_pin_s0, err); ++ goto err_free_nxp; ++ } + -+void ag71xx_phy_disconnect(struct ag71xx *ag) -+{ -+ if (ag->phy_dev) -+ phy_disconnect(ag->phy_dev); -+} -diff -Nur linux-2.6.39.orig/drivers/net/phy/Kconfig linux-2.6.39/drivers/net/phy/Kconfig ---- linux-2.6.39.orig/drivers/net/phy/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/phy/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -91,6 +91,10 @@ - ---help--- - Supports the KSZ9021, VSC8201, KS8001 PHYs. - -+config IP175C_PHY -+ tristate "Driver for IC+ IP175C/IP178C switches" -+ select SWCONFIG ++ err = gpio_request(pdata->gpio_pin_s1, dev_name(&pdev->dev)); ++ if (err) { ++ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", ++ pdata->gpio_pin_s1, err); ++ goto err_free_s0; ++ } + - config FIXED_PHY - bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" - depends on PHYLIB=y -diff -Nur linux-2.6.39.orig/drivers/net/phy/phy.c linux-2.6.39/drivers/net/phy/phy.c ---- linux-2.6.39.orig/drivers/net/phy/phy.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/phy/phy.c 2011-05-27 14:36:51.000000000 +0200 -@@ -297,6 +297,50 @@ - } - EXPORT_SYMBOL(phy_ethtool_gset); - -+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr) -+{ -+ u32 cmd; -+ int tmp; -+ struct ethtool_cmd ecmd = { ETHTOOL_GSET }; -+ struct ethtool_value edata = { ETHTOOL_GLINK }; ++ err = gpio_request(pdata->gpio_pin_1y, dev_name(&pdev->dev)); ++ if (err) { ++ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", ++ pdata->gpio_pin_1y, err); ++ goto err_free_s1; ++ } + -+ if (get_user(cmd, (u32 *) useraddr)) -+ return -EFAULT; ++ err = gpio_request(pdata->gpio_pin_2y, dev_name(&pdev->dev)); ++ if (err) { ++ dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n", ++ pdata->gpio_pin_2y, err); ++ goto err_free_1y; ++ } + -+ switch (cmd) { -+ case ETHTOOL_GSET: -+ phy_ethtool_gset(phydev, &ecmd); -+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd))) -+ return -EFAULT; -+ return 0; ++ err = gpio_direction_output(pdata->gpio_pin_s0, 0); ++ if (err) { ++ dev_err(&pdev->dev, ++ "unable to set direction of gpio %u, err=%d\n", ++ pdata->gpio_pin_s0, err); ++ goto err_free_2y; ++ } + -+ case ETHTOOL_SSET: -+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd))) -+ return -EFAULT; -+ return phy_ethtool_sset(phydev, &ecmd); ++ err = gpio_direction_output(pdata->gpio_pin_s1, 0); ++ if (err) { ++ dev_err(&pdev->dev, ++ "unable to set direction of gpio %u, err=%d\n", ++ pdata->gpio_pin_s1, err); ++ goto err_free_2y; ++ } + -+ case ETHTOOL_NWAY_RST: -+ /* if autoneg is off, it's an error */ -+ tmp = phy_read(phydev, MII_BMCR); -+ if (tmp & BMCR_ANENABLE) { -+ tmp |= (BMCR_ANRESTART); -+ phy_write(phydev, MII_BMCR, tmp); -+ return 0; -+ } -+ return -EINVAL; ++ err = gpio_direction_input(pdata->gpio_pin_1y); ++ if (err) { ++ dev_err(&pdev->dev, ++ "unable to set direction of gpio %u, err=%d\n", ++ pdata->gpio_pin_1y, err); ++ goto err_free_2y; ++ } + -+ case ETHTOOL_GLINK: -+ edata.data = (phy_read(phydev, -+ MII_BMSR) & BMSR_LSTATUS) ? 1 : 0; -+ if (copy_to_user(useraddr, &edata, sizeof(edata))) -+ return -EFAULT; -+ return 0; ++ err = gpio_direction_input(pdata->gpio_pin_2y); ++ if (err) { ++ dev_err(&pdev->dev, ++ "unable to set direction of gpio %u, err=%d\n", ++ pdata->gpio_pin_2y, err); ++ goto err_free_2y; + } + -+ return -EOPNOTSUPP; -+} -+EXPORT_SYMBOL(phy_ethtool_ioctl); ++ nxp->parent = &pdev->dev; ++ mutex_init(&nxp->lock); + - /** - * phy_mii_ioctl - generic PHY MII ioctl interface - * @phydev: the phy_device struct -@@ -472,7 +516,7 @@ - int idx; - - idx = phy_find_setting(phydev->speed, phydev->duplex); -- ++ gc = &nxp->gpio_chip; + - idx++; - - idx = phy_find_valid(idx, phydev->supported); -diff -Nur linux-2.6.39.orig/drivers/net/phy/phy_device.c linux-2.6.39/drivers/net/phy/phy_device.c ---- linux-2.6.39.orig/drivers/net/phy/phy_device.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/phy/phy_device.c 2011-05-27 14:36:51.000000000 +0200 -@@ -149,6 +149,19 @@ - } - EXPORT_SYMBOL(phy_scan_fixups); - -+static int generic_receive_skb(struct sk_buff *skb) -+{ -+ skb->protocol = eth_type_trans(skb, skb->dev); -+ return netif_receive_skb(skb); ++ gc->direction_input = nxp_74hc153_direction_input; ++ gc->direction_output = nxp_74hc153_direction_output; ++ gc->get = nxp_74hc153_get_value; ++ gc->set = nxp_74hc153_set_value; ++ gc->can_sleep = 1; ++ ++ gc->base = pdata->gpio_base; ++ gc->ngpio = NXP_74HC153_NUM_GPIOS; ++ gc->label = dev_name(nxp->parent); ++ gc->dev = nxp->parent; ++ gc->owner = THIS_MODULE; ++ ++ err = gpiochip_add(&nxp->gpio_chip); ++ if (err) { ++ dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err); ++ goto err_free_2y; ++ } ++ ++ platform_set_drvdata(pdev, nxp); ++ return 0; ++ ++err_free_2y: ++ gpio_free(pdata->gpio_pin_2y); ++err_free_1y: ++ gpio_free(pdata->gpio_pin_1y); ++err_free_s1: ++ gpio_free(pdata->gpio_pin_s1); ++err_free_s0: ++ gpio_free(pdata->gpio_pin_s0); ++err_free_nxp: ++ kfree(nxp); ++ return err; +} + -+static int generic_rx(struct sk_buff *skb) ++static int nxp_74hc153_remove(struct platform_device *pdev) +{ -+ skb->protocol = eth_type_trans(skb, skb->dev); -+ return netif_rx(skb); ++ struct nxp_74hc153_chip *nxp = platform_get_drvdata(pdev); ++ struct nxp_74hc153_platform_data *pdata = pdev->dev.platform_data; ++ ++ if (nxp) { ++ int err; ++ ++ err = gpiochip_remove(&nxp->gpio_chip); ++ if (err) { ++ dev_err(&pdev->dev, ++ "unable to remove gpio chip, err=%d\n", ++ err); ++ return err; ++ } ++ ++ gpio_free(pdata->gpio_pin_2y); ++ gpio_free(pdata->gpio_pin_1y); ++ gpio_free(pdata->gpio_pin_s1); ++ gpio_free(pdata->gpio_pin_s0); ++ ++ kfree(nxp); ++ platform_set_drvdata(pdev, NULL); ++ } ++ ++ return 0; +} + ++static struct platform_driver nxp_74hc153_driver = { ++ .probe = nxp_74hc153_probe, ++ .remove = __devexit_p(nxp_74hc153_remove), ++ .driver = { ++ .name = NXP_74HC153_DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init nxp_74hc153_init(void) ++{ ++ return platform_driver_register(&nxp_74hc153_driver); ++} ++subsys_initcall(nxp_74hc153_init); + - static struct phy_device* phy_device_create(struct mii_bus *bus, - int addr, int phy_id) - { -@@ -180,6 +193,8 @@ - dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr); - - dev->state = PHY_DOWN; -+ dev->netif_receive_skb = &generic_receive_skb; -+ dev->netif_rx = &generic_rx; - - mutex_init(&dev->lock); - INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); -diff -Nur linux-2.6.39.orig/drivers/spi/Kconfig linux-2.6.39/drivers/spi/Kconfig ---- linux-2.6.39.orig/drivers/spi/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/spi/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -67,6 +67,13 @@ - This enables support for the SPI controller present on the - Atheros AR71XX/AR724X/AR913X SoCs. - -+config SPI_AR71XX -+ tristate "Atheros AR71xx SPI Controller" -+ depends on SPI_MASTER && ATHEROS_AR71XX -+ select SPI_BITBANG -+ help -+ This is the SPI contoller driver for Atheros AR71xx. ++static void __exit nxp_74hc153_exit(void) ++{ ++ platform_driver_unregister(&nxp_74hc153_driver); ++} ++module_exit(nxp_74hc153_exit); + - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) -diff -Nur linux-2.6.39.orig/drivers/spi/Makefile linux-2.6.39/drivers/spi/Makefile ---- linux-2.6.39.orig/drivers/spi/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/spi/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -11,6 +11,7 @@ - # SPI master controller drivers (bus) - obj-$(CONFIG_SPI_ALTERA) += spi_altera.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o -+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATH79) += ath79_spi.o - obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o - obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o -diff -Nur linux-2.6.39.orig/drivers/spi/ap83_spi.c linux-2.6.39/drivers/spi/ap83_spi.c ---- linux-2.6.39.orig/drivers/spi/ap83_spi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/ap83_spi.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,282 @@ ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC153"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:" NXP_74HC153_DRIVER_NAME); +diff -Nur linux-2.6.39.orig/drivers/leds/leds-rb750.c linux-2.6.39/drivers/leds/leds-rb750.c +--- linux-2.6.39.orig/drivers/leds/leds-rb750.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/leds/leds-rb750.c 2011-04-27 12:19:22.267661616 +0200 +@@ -0,0 +1,141 @@ +/* -+ * Atheros AP83 board specific SPI Controller driver ++ * LED driver for the RouterBOARD 750 + * -+ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ -+ +#include +#include -+#include -+#include -+#include +#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define DRV_DESC "Atheros AP83 board SPI Controller driver" -+#define DRV_VERSION "0.1.0" -+#define DRV_NAME "ap83-spi" ++#include ++#include + -+#define AP83_SPI_CLK_HIGH (1 << 23) -+#define AP83_SPI_CLK_LOW 0 -+#define AP83_SPI_MOSI_HIGH (1 << 22) -+#define AP83_SPI_MOSI_LOW 0 ++#include + -+#define AP83_SPI_GPIO_CS 1 -+#define AP83_SPI_GPIO_MISO 3 ++#define DRV_NAME "leds-rb750" + -+struct ap83_spi { -+ struct spi_bitbang bitbang; -+ void __iomem *base; -+ u32 addr; ++struct rb750_led_dev { ++ struct led_classdev cdev; ++ u32 mask; ++ int active_low; ++}; + -+ struct platform_device *pdev; ++struct rb750_led_drvdata { ++ struct rb750_led_dev *led_devs; ++ int num_leds; +}; + -+static inline u32 ap83_spi_rr(struct ap83_spi *sp, u32 reg) ++static inline struct rb750_led_dev *to_rbled(struct led_classdev *led_cdev) +{ -+ return __raw_readl(sp->base + reg); ++ return (struct rb750_led_dev *)container_of(led_cdev, ++ struct rb750_led_dev, cdev); +} + -+static inline struct ap83_spi *spidev_to_sp(struct spi_device *spi) ++static void rb750_led_brightness_set(struct led_classdev *led_cdev, ++ enum led_brightness value) +{ -+ return spi_master_get_devdata(spi->master); ++ struct rb750_led_dev *rbled = to_rbled(led_cdev); ++ int level; ++ ++ level = (value == LED_OFF) ? 0 : 1; ++ level ^= rbled->active_low; ++ ++ if (level) ++ rb750_latch_change(0, rbled->mask); ++ else ++ rb750_latch_change(rbled->mask, 0); +} + -+static inline void setsck(struct spi_device *spi, int val) ++static int __devinit rb750_led_probe(struct platform_device *pdev) +{ -+ struct ap83_spi *sp = spidev_to_sp(spi); ++ struct rb750_led_platform_data *pdata; ++ struct rb750_led_drvdata *drvdata; ++ int ret = 0; ++ int i; + -+ if (val) -+ sp->addr |= AP83_SPI_CLK_HIGH; -+ else -+ sp->addr &= ~AP83_SPI_CLK_HIGH; ++ pdata = pdev->dev.platform_data; ++ if (!pdata) ++ return -EINVAL; + -+ dev_dbg(&spi->dev, "addr=%08x, SCK set to %s\n", -+ sp->addr, (val) ? "HIGH" : "LOW"); ++ drvdata = kzalloc(sizeof(struct rb750_led_drvdata) + ++ sizeof(struct rb750_led_dev) * pdata->num_leds, ++ GFP_KERNEL); ++ if (!drvdata) ++ return -ENOMEM; + -+ ap83_spi_rr(sp, sp->addr); -+} ++ drvdata->num_leds = pdata->num_leds; ++ drvdata->led_devs = (struct rb750_led_dev *) &drvdata[1]; + -+static inline void setmosi(struct spi_device *spi, int val) -+{ -+ struct ap83_spi *sp = spidev_to_sp(spi); ++ for (i = 0; i < drvdata->num_leds; i++) { ++ struct rb750_led_dev *rbled = &drvdata->led_devs[i]; ++ struct rb750_led_data *led_data = &pdata->leds[i]; + -+ if (val) -+ sp->addr |= AP83_SPI_MOSI_HIGH; -+ else -+ sp->addr &= ~AP83_SPI_MOSI_HIGH; ++ rbled->cdev.name = led_data->name; ++ rbled->cdev.default_trigger = led_data->default_trigger; ++ rbled->cdev.brightness_set = rb750_led_brightness_set; ++ rbled->cdev.brightness = LED_OFF; + -+ dev_dbg(&spi->dev, "addr=%08x, MOSI set to %s\n", -+ sp->addr, (val) ? "HIGH" : "LOW"); ++ rbled->mask = led_data->mask; ++ rbled->active_low = !!led_data->active_low; + -+ ap83_spi_rr(sp, sp->addr); -+} ++ ret = led_classdev_register(&pdev->dev, &rbled->cdev); ++ if (ret) ++ goto err; ++ } + -+static inline u32 getmiso(struct spi_device *spi) -+{ -+ u32 ret; ++ platform_set_drvdata(pdev, drvdata); ++ return 0; + -+ ret = gpio_get_value(AP83_SPI_GPIO_MISO) ? 1 : 0; -+ dev_dbg(&spi->dev, "get MISO: %d\n", ret); ++err: ++ for (i = i - 1; i >= 0; i--) ++ led_classdev_unregister(&drvdata->led_devs[i].cdev); + ++ kfree(drvdata); + return ret; +} + -+static inline void do_spidelay(struct spi_device *spi, unsigned nsecs) -+{ -+ ndelay(nsecs); -+} -+ -+static void ap83_spi_chipselect(struct spi_device *spi, int on) ++static int __devexit rb750_led_remove(struct platform_device *pdev) +{ -+ struct ap83_spi *sp = spidev_to_sp(spi); ++ struct rb750_led_drvdata *drvdata; ++ int i; + -+ dev_dbg(&spi->dev, "set CS to %d\n", (on) ? 0 : 1); ++ drvdata = platform_get_drvdata(pdev); ++ for (i = 0; i < drvdata->num_leds; i++) ++ led_classdev_unregister(&drvdata->led_devs[i].cdev); + -+ if (on) { -+ ar71xx_flash_acquire(); ++ kfree(drvdata); ++ return 0; ++} + -+ sp->addr = 0; -+ ap83_spi_rr(sp, sp->addr); -+ -+ gpio_set_value(AP83_SPI_GPIO_CS, 0); -+ } else { -+ gpio_set_value(AP83_SPI_GPIO_CS, 1); -+ ar71xx_flash_release(); -+ } -+} -+ -+#define spidelay(nsecs) \ -+ do { \ -+ /* Steal the spi_device pointer from our caller. \ -+ * The bitbang-API should probably get fixed here... */ \ -+ do_spidelay(spi, nsecs); \ -+ } while (0) -+ -+#define EXPAND_BITBANG_TXRX -+#include -+ -+static u32 ap83_spi_txrx_mode0(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ dev_dbg(&spi->dev, "TXRX0 word=%08x, bits=%u\n", word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); -+} ++static struct platform_driver rb750_led_driver = { ++ .probe = rb750_led_probe, ++ .remove = __devexit_p(rb750_led_remove), ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; + -+static u32 ap83_spi_txrx_mode1(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) -+{ -+ dev_dbg(&spi->dev, "TXRX1 word=%08x, bits=%u\n", word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits); -+} ++MODULE_ALIAS("platform:leds-rb750"); + -+static u32 ap83_spi_txrx_mode2(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) ++static int __init rb750_led_init(void) +{ -+ dev_dbg(&spi->dev, "TXRX2 word=%08x, bits=%u\n", word, bits); -+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits); ++ return platform_driver_register(&rb750_led_driver); +} + -+static u32 ap83_spi_txrx_mode3(struct spi_device *spi, -+ unsigned nsecs, u32 word, u8 bits) ++static void __exit rb750_led_exit(void) +{ -+ dev_dbg(&spi->dev, "TXRX3 word=%08x, bits=%u\n", word, bits); -+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits); ++ platform_driver_unregister(&rb750_led_driver); +} + -+static int ap83_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct ap83_spi *sp; -+ struct ap83_spi_platform_data *pdata; -+ struct resource *r; -+ int ret; -+ -+ ret = gpio_request(AP83_SPI_GPIO_MISO, "spi-miso"); -+ if (ret) { -+ dev_err(&pdev->dev, "gpio request failed for MISO\n"); -+ return ret; -+ } -+ -+ ret = gpio_request(AP83_SPI_GPIO_CS, "spi-cs"); -+ if (ret) { -+ dev_err(&pdev->dev, "gpio request failed for CS\n"); -+ goto err_free_miso; -+ } -+ -+ ret = gpio_direction_input(AP83_SPI_GPIO_MISO); -+ if (ret) { -+ dev_err(&pdev->dev, "unable to set direction of MISO\n"); -+ goto err_free_cs; -+ } -+ -+ ret = gpio_direction_output(AP83_SPI_GPIO_CS, 0); -+ if (ret) { -+ dev_err(&pdev->dev, "unable to set direction of CS\n"); -+ goto err_free_cs; -+ } -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(*sp)); -+ if (master == NULL) { -+ dev_err(&pdev->dev, "failed to allocate spi master\n"); -+ return -ENOMEM; -+ } -+ -+ sp = spi_master_get_devdata(master); -+ platform_set_drvdata(pdev, sp); -+ -+ pdata = pdev->dev.platform_data; -+ -+ sp->bitbang.master = spi_master_get(master); -+ sp->bitbang.chipselect = ap83_spi_chipselect; -+ sp->bitbang.txrx_word[SPI_MODE_0] = ap83_spi_txrx_mode0; -+ sp->bitbang.txrx_word[SPI_MODE_1] = ap83_spi_txrx_mode1; -+ sp->bitbang.txrx_word[SPI_MODE_2] = ap83_spi_txrx_mode2; -+ sp->bitbang.txrx_word[SPI_MODE_3] = ap83_spi_txrx_mode3; ++module_init(rb750_led_init); ++module_exit(rb750_led_exit); + -+ sp->bitbang.master->bus_num = pdev->id; -+ sp->bitbang.master->num_chipselect = 1; ++MODULE_DESCRIPTION(DRV_NAME); ++MODULE_DESCRIPTION("LED driver for the RouterBOARD 750"); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_LICENSE("GPL v2"); +diff -Nur linux-2.6.39.orig/drivers/leds/leds-wndr3700-usb.c linux-2.6.39/drivers/leds/leds-wndr3700-usb.c +--- linux-2.6.39.orig/drivers/leds/leds-wndr3700-usb.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/leds/leds-wndr3700-usb.c 2011-04-27 12:19:22.267661616 +0200 +@@ -0,0 +1,75 @@ ++/* ++ * USB LED driver for the NETGEAR WNDR3700 ++ * ++ * Copyright (C) 2009 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (r == NULL) { -+ ret = -ENOENT; -+ goto err_spi_put; -+ } ++#include ++#include ++#include + -+ sp->base = ioremap_nocache(r->start, r->end - r->start + 1); -+ if (!sp->base) { -+ ret = -ENXIO; -+ goto err_spi_put; -+ } ++#include + -+ ret = spi_bitbang_start(&sp->bitbang); -+ if (!ret) -+ goto err_unmap; ++#define DRIVER_NAME "wndr3700-led-usb" + -+ dev_info(&pdev->dev, "AP83 SPI adapter at %08x\n", r->start); ++static void wndr3700_usb_led_set(struct led_classdev *cdev, ++ enum led_brightness brightness) ++{ ++ if (brightness) ++ ar71xx_device_start(RESET_MODULE_GE1_PHY); ++ else ++ ar71xx_device_stop(RESET_MODULE_GE1_PHY); ++} + -+ return 0; ++static enum led_brightness wndr3700_usb_led_get(struct led_classdev *cdev) ++{ ++ return ar71xx_device_stopped(RESET_MODULE_GE1_PHY) ? LED_OFF : LED_FULL; ++} + -+ err_unmap: -+ iounmap(sp->base); -+ err_spi_put: -+ platform_set_drvdata(pdev, NULL); -+ spi_master_put(sp->bitbang.master); ++static struct led_classdev wndr3700_usb_led = { ++ .name = "wndr3700:green:usb", ++ .brightness_set = wndr3700_usb_led_set, ++ .brightness_get = wndr3700_usb_led_get, ++}; + -+ err_free_cs: -+ gpio_free(AP83_SPI_GPIO_CS); -+ err_free_miso: -+ gpio_free(AP83_SPI_GPIO_MISO); -+ return ret; ++static int __devinit wndr3700_usb_led_probe(struct platform_device *pdev) ++{ ++ return led_classdev_register(&pdev->dev, &wndr3700_usb_led); +} + -+static int ap83_spi_remove(struct platform_device *pdev) ++static int __devexit wndr3700_usb_led_remove(struct platform_device *pdev) +{ -+ struct ap83_spi *sp = platform_get_drvdata(pdev); -+ -+ spi_bitbang_stop(&sp->bitbang); -+ iounmap(sp->base); -+ platform_set_drvdata(pdev, NULL); -+ spi_master_put(sp->bitbang.master); -+ ++ led_classdev_unregister(&wndr3700_usb_led); + return 0; +} + -+static struct platform_driver ap83_spi_drv = { -+ .probe = ap83_spi_probe, -+ .remove = ap83_spi_remove, -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, ++static struct platform_driver wndr3700_usb_led_driver = { ++ .probe = wndr3700_usb_led_probe, ++ .remove = __devexit_p(wndr3700_usb_led_remove), ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, + }, +}; + -+static int __init ap83_spi_init(void) ++static int __init wndr3700_usb_led_init(void) +{ -+ return platform_driver_register(&ap83_spi_drv); ++ return platform_driver_register(&wndr3700_usb_led_driver); +} -+module_init(ap83_spi_init); + -+static void __exit ap83_spi_exit(void) ++static void __exit wndr3700_usb_led_exit(void) +{ -+ platform_driver_unregister(&ap83_spi_drv); ++ platform_driver_unregister(&wndr3700_usb_led_driver); +} -+module_exit(ap83_spi_exit); + -+MODULE_ALIAS("platform:" DRV_NAME); -+MODULE_DESCRIPTION(DRV_DESC); -+MODULE_VERSION(DRV_VERSION); ++module_init(wndr3700_usb_led_init); ++module_exit(wndr3700_usb_led_exit); ++ ++MODULE_DESCRIPTION("USB LED driver for the NETGEAR WNDR3700"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_LICENSE("GPL v2"); -diff -Nur linux-2.6.39.orig/drivers/spi/ar71xx_spi.c linux-2.6.39/drivers/spi/ar71xx_spi.c ---- linux-2.6.39.orig/drivers/spi/ar71xx_spi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/ar71xx_spi.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,283 @@ ++MODULE_ALIAS("platform:" DRIVER_NAME); +diff -Nur linux-2.6.39.orig/drivers/Makefile linux-2.6.39/drivers/Makefile +--- linux-2.6.39.orig/drivers/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/Makefile 2011-08-23 15:10:42.370478643 +0200 +@@ -46,8 +46,8 @@ + obj-$(CONFIG_SCSI) += scsi/ + obj-$(CONFIG_ATA) += ata/ + obj-$(CONFIG_TARGET_CORE) += target/ +-obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPI) += spi/ ++obj-$(CONFIG_MTD) += mtd/ + obj-y += net/ + obj-$(CONFIG_ATM) += atm/ + obj-$(CONFIG_FUSION) += message/ +diff -Nur linux-2.6.39.orig/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.6.39/drivers/mtd/chips/cfi_cmdset_0002.c +--- linux-2.6.39.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/mtd/chips/cfi_cmdset_0002.c 2011-08-22 16:22:28.477979654 +0200 +@@ -39,7 +39,7 @@ + #include + + #define AMD_BOOTLOC_BUG +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + #define MAX_WORD_RETRIES 3 + +@@ -50,7 +50,9 @@ + + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#if !FORCE_WORD_WRITE + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#endif + static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); + static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); + static void cfi_amdstd_sync (struct mtd_info *); +@@ -186,6 +188,7 @@ + } + #endif + ++#if !FORCE_WORD_WRITE + static void fixup_use_write_buffers(struct mtd_info *mtd) + { + struct map_info *map = mtd->priv; +@@ -195,6 +198,7 @@ + mtd->write = cfi_amdstd_write_buffers; + } + } ++#endif /* !FORCE_WORD_WRITE */ + + /* Atmel chips don't use the same PRI format as AMD chips */ + static void fixup_convert_atmel_pri(struct mtd_info *mtd) +@@ -1377,6 +1381,7 @@ + /* + * FIXME: interleaved mode not tested, and probably not supported! + */ ++#if !FORCE_WORD_WRITE + static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, + int len) +@@ -1487,7 +1492,6 @@ + return ret; + } + +- + static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +@@ -1566,6 +1570,7 @@ + + return 0; + } ++#endif /* !FORCE_WORD_WRITE */ + + + /* +diff -Nur linux-2.6.39.orig/drivers/mtd/maps/ar91xx_flash.c linux-2.6.39/drivers/mtd/maps/ar91xx_flash.c +--- linux-2.6.39.orig/drivers/mtd/maps/ar91xx_flash.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/mtd/maps/ar91xx_flash.c 2011-04-27 12:19:22.177661504 +0200 +@@ -0,0 +1,310 @@ +/* -+ * Atheros AR71xx SPI Controller driver ++ * Parallel flash driver for the Atheros AR91xx SoC + * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * Copyright (C) 2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as @@ -15099,2909 +16534,11447 @@ diff -Nur linux-2.6.39.orig/drivers/spi/ar71xx_spi.c linux-2.6.39/drivers/spi/ar + * + */ + ++#include ++#include +#include +#include -+#include -+#include -+#include ++#include ++#include +#include ++#include ++#include ++#include +#include -+#include -+#include -+#include + +#include -+#include -+ -+#define DRV_DESC "Atheros AR71xx SPI Controller driver" -+#define DRV_VERSION "0.2.4" -+#define DRV_NAME "ar71xx-spi" ++#include + -+#undef PER_BIT_READ ++#define DRV_NAME "ar91xx-flash" + -+struct ar71xx_spi { -+ struct spi_bitbang bitbang; -+ u32 ioc_base; -+ u32 reg_ctrl; -+ -+ void __iomem *base; -+ -+ struct platform_device *pdev; -+ u32 (*get_ioc_base)(u8 chip_select, int cs_high, -+ int is_on); ++struct ar91xx_flash_info { ++ struct mtd_info *mtd; ++ struct map_info map; ++#ifdef CONFIG_MTD_PARTITIONS ++ int nr_parts; ++ struct mtd_partition *parts; ++#endif +}; + -+static inline u32 ar71xx_spi_rr(struct ar71xx_spi *sp, unsigned reg) ++static map_word ar91xx_flash_read(struct map_info *map, unsigned long ofs) +{ -+ return __raw_readl(sp->base + reg); -+} ++ map_word val; + -+static inline void ar71xx_spi_wr(struct ar71xx_spi *sp, unsigned reg, u32 val) -+{ -+ __raw_writel(val, sp->base + reg); ++ if (map_bankwidth_is_1(map)) ++ val.x[0] = __raw_readb(map->virt + (ofs ^ 3)); ++ else if (map_bankwidth_is_2(map)) ++ val.x[0] = __raw_readw(map->virt + (ofs ^ 2)); ++ else ++ val = map_word_ff(map); ++ ++ return val; +} + -+static inline struct ar71xx_spi *spidev_to_sp(struct spi_device *spi) ++static void ar91xx_flash_write(struct map_info *map, map_word d, ++ unsigned long ofs) +{ -+ return spi_master_get_devdata(spi->master); ++ if (map_bankwidth_is_1(map)) ++ __raw_writeb(d.x[0], map->virt + (ofs ^ 3)); ++ else if (map_bankwidth_is_2(map)) ++ __raw_writew(d.x[0], map->virt + (ofs ^ 2)); ++ ++ mb(); +} + -+static u32 ar71xx_spi_get_ioc_base(u8 chip_select, int cs_high, int is_on) ++static map_word ar91xx_flash_read_lock(struct map_info *map, unsigned long ofs) +{ -+ u32 ret; ++ map_word ret; + -+ if (is_on == AR71XX_SPI_CS_INACTIVE) -+ ret = SPI_IOC_CS_ALL; -+ else -+ ret = SPI_IOC_CS_ALL & ~SPI_IOC_CS(chip_select); ++ ar71xx_flash_acquire(); ++ ret = ar91xx_flash_read(map, ofs); ++ ar71xx_flash_release(); + + return ret; +} + -+static void ar71xx_spi_chipselect(struct spi_device *spi, int value) ++static void ar91xx_flash_write_lock(struct map_info *map, map_word d, ++ unsigned long ofs) +{ -+ struct ar71xx_spi *sp = spidev_to_sp(spi); -+ void __iomem *base = sp->base; -+ u32 ioc_base; -+ -+ switch (value) { -+ case BITBANG_CS_INACTIVE: -+ ioc_base = sp->get_ioc_base(spi->chip_select, -+ (spi->mode & SPI_CS_HIGH) != 0, -+ AR71XX_SPI_CS_INACTIVE); -+ __raw_writel(ioc_base, base + SPI_REG_IOC); -+ break; -+ -+ case BITBANG_CS_ACTIVE: -+ ioc_base = sp->get_ioc_base(spi->chip_select, -+ (spi->mode & SPI_CS_HIGH) != 0, -+ AR71XX_SPI_CS_ACTIVE); -+ -+ __raw_writel(ioc_base, base + SPI_REG_IOC); -+ sp->ioc_base = ioc_base; -+ break; -+ } ++ ar71xx_flash_acquire(); ++ ar91xx_flash_write(map, d, ofs); ++ ar71xx_flash_release(); +} + -+static void ar71xx_spi_setup_regs(struct spi_device *spi) ++static void ar91xx_flash_copy_from_lock(struct map_info *map, void *to, ++ unsigned long from, ssize_t len) +{ -+ struct ar71xx_spi *sp = spidev_to_sp(spi); -+ -+ /* enable GPIO mode */ -+ ar71xx_spi_wr(sp, SPI_REG_FS, SPI_FS_GPIO); -+ -+ /* save CTRL register */ -+ sp->reg_ctrl = ar71xx_spi_rr(sp, SPI_REG_CTRL); -+ -+ /* TODO: setup speed? */ -+ ar71xx_spi_wr(sp, SPI_REG_CTRL, 0x43); ++ ar71xx_flash_acquire(); ++ inline_map_copy_from(map, to, from, len); ++ ar71xx_flash_release(); +} + -+static void ar71xx_spi_restore_regs(struct spi_device *spi) ++static void ar91xx_flash_copy_to_lock(struct map_info *map, unsigned long to, ++ const void *from, ssize_t len) +{ -+ struct ar71xx_spi *sp = spidev_to_sp(spi); -+ -+ /* restore CTRL register */ -+ ar71xx_spi_wr(sp, SPI_REG_CTRL, sp->reg_ctrl); -+ /* disable GPIO mode */ -+ ar71xx_spi_wr(sp, SPI_REG_FS, 0); ++ ar71xx_flash_acquire(); ++ inline_map_copy_to(map, to, from, len); ++ ar71xx_flash_release(); +} + -+static int ar71xx_spi_setup(struct spi_device *spi) ++static int ar91xx_flash_remove(struct platform_device *pdev) +{ -+ int status; ++ struct ar91xx_flash_platform_data *pdata; ++ struct ar91xx_flash_info *info; + -+ if (spi->bits_per_word > 32) -+ return -EINVAL; ++ info = platform_get_drvdata(pdev); ++ if (info == NULL) ++ return 0; + -+ if (!spi->controller_state) -+ ar71xx_spi_setup_regs(spi); ++ platform_set_drvdata(pdev, NULL); + -+ status = spi_bitbang_setup(spi); -+ if (status && !spi->controller_state) -+ ar71xx_spi_restore_regs(spi); ++ if (info->mtd == NULL) ++ return 0; + -+ return status; -+} ++ pdata = pdev->dev.platform_data; ++#ifdef CONFIG_MTD_PARTITIONS ++ if (info->nr_parts) { ++ del_mtd_partitions(info->mtd); ++ kfree(info->parts); ++ } else if (pdata->nr_parts) { ++ del_mtd_partitions(info->mtd); ++ } else { ++ del_mtd_device(info->mtd); ++ } ++#else ++ del_mtd_device(info->mtd); ++#endif ++ map_destroy(info->mtd); + -+static void ar71xx_spi_cleanup(struct spi_device *spi) -+{ -+ ar71xx_spi_restore_regs(spi); -+ spi_bitbang_cleanup(spi); ++ return 0; +} + -+static u32 ar71xx_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, -+ u32 word, u8 bits) -+{ -+ struct ar71xx_spi *sp = spidev_to_sp(spi); -+ void __iomem *base = sp->base; -+ u32 ioc = sp->ioc_base; -+ u32 ret; ++static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; ++#ifdef CONFIG_MTD_PARTITIONS ++static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; ++#endif + -+ /* clock starts at inactive polarity */ -+ for (word <<= (32 - bits); likely(bits); bits--) { -+ u32 out; ++static int ar91xx_flash_probe(struct platform_device *pdev) ++{ ++ struct ar91xx_flash_platform_data *pdata; ++ struct ar91xx_flash_info *info; ++ struct resource *res; ++ struct resource *region; ++ const char **probe_type; ++ int err = 0; + -+ if (word & (1 << 31)) -+ out = ioc | SPI_IOC_DO; -+ else -+ out = ioc & ~SPI_IOC_DO; ++ pdata = pdev->dev.platform_data; ++ if (pdata == NULL) ++ return -EINVAL; + -+ /* setup MSB (to slave) on trailing edge */ -+ __raw_writel(out, base + SPI_REG_IOC); ++ info = devm_kzalloc(&pdev->dev, sizeof(struct ar91xx_flash_info), ++ GFP_KERNEL); ++ if (info == NULL) { ++ err = -ENOMEM; ++ goto err_out; ++ } + -+ __raw_writel(out | SPI_IOC_CLK, base + SPI_REG_IOC); ++ platform_set_drvdata(pdev, info); + -+ word <<= 1; ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (res == NULL) { ++ err = -ENOENT; ++ goto err_out; ++ } + -+#ifdef PER_BIT_READ -+ /* sample MSB (from slave) on leading edge */ -+ ret = __raw_readl(base + SPI_REG_RDS); -+ __raw_writel(out, base + SPI_REG_IOC); -+#endif ++ dev_info(&pdev->dev, "%.8llx at %.8llx\n", ++ (unsigned long long)(res->end - res->start + 1), ++ (unsigned long long)res->start); + ++ region = devm_request_mem_region(&pdev->dev, ++ res->start, res->end - res->start + 1, ++ dev_name(&pdev->dev)); ++ if (region == NULL) { ++ dev_err(&pdev->dev, "could not reserve memory region\n"); ++ err = -ENOMEM; ++ goto err_out; + } + -+#ifndef PER_BIT_READ -+ ret = __raw_readl(base + SPI_REG_RDS); -+#endif -+ return ret; -+} ++ info->map.name = dev_name(&pdev->dev); ++ info->map.phys = res->start; ++ info->map.size = res->end - res->start + 1; ++ info->map.bankwidth = pdata->width; + -+static int ar71xx_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct ar71xx_spi *sp; -+ struct ar71xx_spi_platform_data *pdata; -+ struct resource *r; -+ int ret; ++ info->map.virt = devm_ioremap(&pdev->dev, info->map.phys, ++ info->map.size); ++ if (info->map.virt == NULL) { ++ dev_err(&pdev->dev, "failed to ioremap flash region\n"); ++ err = -EIO; ++ goto err_out; ++ } + -+ master = spi_alloc_master(&pdev->dev, sizeof(*sp)); -+ if (master == NULL) { -+ dev_err(&pdev->dev, "failed to allocate spi master\n"); -+ return -ENOMEM; ++ simple_map_init(&info->map); ++ if (pdata->is_shared) { ++ info->map.read = ar91xx_flash_read_lock; ++ info->map.write = ar91xx_flash_write_lock; ++ info->map.copy_from = ar91xx_flash_copy_from_lock; ++ info->map.copy_to = ar91xx_flash_copy_to_lock; ++ } else { ++ info->map.read = ar91xx_flash_read; ++ info->map.write = ar91xx_flash_write; + } + -+ sp = spi_master_get_devdata(master); -+ platform_set_drvdata(pdev, sp); ++ probe_type = rom_probe_types; ++ for (; info->mtd == NULL && *probe_type != NULL; probe_type++) ++ info->mtd = do_map_probe(*probe_type, &info->map); + -+ pdata = pdev->dev.platform_data; ++ if (info->mtd == NULL) { ++ dev_err(&pdev->dev, "map_probe failed\n"); ++ err = -ENXIO; ++ goto err_out; ++ } + -+ master->setup = ar71xx_spi_setup; -+ master->cleanup = ar71xx_spi_cleanup; ++ info->mtd->owner = THIS_MODULE; + -+ sp->bitbang.master = spi_master_get(master); -+ sp->bitbang.chipselect = ar71xx_spi_chipselect; -+ sp->bitbang.txrx_word[SPI_MODE_0] = ar71xx_spi_txrx_mode0; -+ sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; -+ -+ sp->get_ioc_base = ar71xx_spi_get_ioc_base; -+ if (pdata) { -+ sp->bitbang.master->bus_num = pdata->bus_num; -+ sp->bitbang.master->num_chipselect = pdata->num_chipselect; -+ if (pdata->get_ioc_base) -+ sp->get_ioc_base = pdata->get_ioc_base; -+ } else { -+ sp->bitbang.master->bus_num = 0; -+ sp->bitbang.master->num_chipselect = 3; ++#ifdef CONFIG_MTD_PARTITIONS ++ if (pdata->nr_parts) { ++ dev_info(&pdev->dev, "using static partition mapping\n"); ++ add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts); ++ return 0; + } + -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (r == NULL) { -+ ret = -ENOENT; -+ goto err1; ++ err = parse_mtd_partitions(info->mtd, part_probe_types, ++ &info->parts, 0); ++ if (err > 0) { ++ add_mtd_partitions(info->mtd, info->parts, err); ++ return 0; + } ++#endif + -+ sp->base = ioremap_nocache(r->start, r->end - r->start + 1); -+ if (!sp->base) { -+ ret = -ENXIO; -+ goto err1; -+ } ++ add_mtd_device(info->mtd); ++ return 0; + -+ ret = spi_bitbang_start(&sp->bitbang); -+ if (!ret) -+ return 0; ++err_out: ++ ar91xx_flash_remove(pdev); ++ return err; ++} + -+ iounmap(sp->base); -+ err1: -+ platform_set_drvdata(pdev, NULL); -+ spi_master_put(sp->bitbang.master); ++#ifdef CONFIG_PM ++static int ar91xx_flash_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct ar91xx_flash_info *info = platform_get_drvdata(dev); ++ int ret = 0; ++ ++ if (info->mtd->suspend) ++ ret = info->mtd->suspend(info->mtd); ++ ++ if (ret) ++ goto fail; ++ ++ return 0; ++ ++fail: ++ if (info->mtd->suspend) { ++ BUG_ON(!info->mtd->resume); ++ info->mtd->resume(info->mtd); ++ } + + return ret; +} + -+static int ar71xx_spi_remove(struct platform_device *pdev) ++static int ar91xx_flash_resume(struct platform_device *pdev) +{ -+ struct ar71xx_spi *sp = platform_get_drvdata(pdev); ++ struct ar91xx_flash_info *info = platform_get_drvdata(pdev); + -+ spi_bitbang_stop(&sp->bitbang); -+ iounmap(sp->base); -+ platform_set_drvdata(pdev, NULL); -+ spi_master_put(sp->bitbang.master); ++ if (info->mtd->resume) ++ info->mtd->resume(info->mtd); + + return 0; +} + -+static struct platform_driver ar71xx_spi_drv = { -+ .probe = ar71xx_spi_probe, -+ .remove = ar71xx_spi_remove, ++static void ar91xx_flash_shutdown(struct platform_device *pdev) ++{ ++ struct ar91xx_flash_info *info = platform_get_drvdata(pdev); ++ ++ if (info->mtd->suspend && info->mtd->resume) ++ if (info->mtd->suspend(info->mtd) == 0) ++ info->mtd->resume(info->mtd); ++} ++#else ++#define ar91xx_flash_suspend NULL ++#define ar91xx_flash_resume NULL ++#define ar91xx_flash_shutdown NULL ++#endif ++ ++static struct platform_driver ar91xx_flash_driver = { ++ .probe = ar91xx_flash_probe, ++ .remove = ar91xx_flash_remove, ++ .suspend = ar91xx_flash_suspend, ++ .resume = ar91xx_flash_resume, ++ .shutdown = ar91xx_flash_shutdown, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + -+static int __init ar71xx_spi_init(void) ++static int __init ar91xx_flash_init(void) +{ -+ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); -+ return platform_driver_register(&ar71xx_spi_drv); ++ return platform_driver_register(&ar91xx_flash_driver); +} -+module_init(ar71xx_spi_init); + -+static void __exit ar71xx_spi_exit(void) ++static void __exit ar91xx_flash_exit(void) +{ -+ platform_driver_unregister(&ar71xx_spi_drv); ++ platform_driver_unregister(&ar91xx_flash_driver); +} -+module_exit(ar71xx_spi_exit); + -+MODULE_ALIAS("platform:" DRV_NAME); -+MODULE_DESCRIPTION(DRV_DESC); -+MODULE_VERSION(DRV_VERSION); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_AUTHOR("Imre Kaloz "); ++module_init(ar91xx_flash_init); ++module_exit(ar91xx_flash_exit); ++ +MODULE_LICENSE("GPL v2"); -diff -Nur linux-2.6.39.orig/drivers/spi/pb44_spi.c linux-2.6.39/drivers/spi/pb44_spi.c ---- linux-2.6.39.orig/drivers/spi/pb44_spi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/pb44_spi.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,299 @@ ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_DESCRIPTION("Parallel flash driver for the Atheros AR91xx SoC"); ++MODULE_ALIAS("platform:" DRV_NAME); +diff -Nur linux-2.6.39.orig/drivers/mtd/maps/Kconfig linux-2.6.39/drivers/mtd/maps/Kconfig +--- linux-2.6.39.orig/drivers/mtd/maps/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/mtd/maps/Kconfig 2011-08-22 16:22:06.367979538 +0200 +@@ -260,6 +260,13 @@ + Support for parsing CFE image tag and creating MTD partitions on + Broadcom BCM63xx boards. + ++config MTD_AR91XX_FLASH ++ tristate "Atheros AR91xx parallel flash support" ++ depends on ATHEROS_AR71XX ++ select MTD_COMPLEX_MAPPINGS ++ help ++ Parallel flash driver for the Atheros AR91xx based boards. ++ + config MTD_DILNETPC + tristate "CFI Flash device mapped on DIL/Net PC" + depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN +diff -Nur linux-2.6.39.orig/drivers/mtd/maps/Makefile linux-2.6.39/drivers/mtd/maps/Makefile +--- linux-2.6.39.orig/drivers/mtd/maps/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/mtd/maps/Makefile 2011-08-22 16:22:06.387979567 +0200 +@@ -40,6 +40,7 @@ + obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o + obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o + obj-$(CONFIG_MTD_PCI) += pci.o ++obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o + obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o + obj-$(CONFIG_MTD_EDB7312) += edb7312.o + obj-$(CONFIG_MTD_IMPA7) += impa7.o +diff -Nur linux-2.6.39.orig/drivers/mtd/nand/Kconfig linux-2.6.39/drivers/mtd/nand/Kconfig +--- linux-2.6.39.orig/drivers/mtd/nand/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/mtd/nand/Kconfig 2011-08-23 14:22:33.407989933 +0200 +@@ -531,4 +531,9 @@ + Enables support for NAND Flash chips on the ST Microelectronics + Flexible Static Memory Controller (FSMC) + ++config MTD_NAND_RB4XX ++ tristate "NAND flash driver for RouterBoard 4xx series" ++ depends on MTD_NAND && AR71XX_MACH_RB4XX ++ select SPI_AR71XX ++ + endif # MTD_NAND +diff -Nur linux-2.6.39.orig/drivers/mtd/nand/Makefile linux-2.6.39/drivers/mtd/nand/Makefile +--- linux-2.6.39.orig/drivers/mtd/nand/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/mtd/nand/Makefile 2011-08-22 16:22:41.217981942 +0200 +@@ -34,6 +34,7 @@ + obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o + obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o ++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o + obj-$(CONFIG_MTD_ALAUDA) += alauda.o + obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o +diff -Nur linux-2.6.39.orig/drivers/mtd/nand/rb4xx_nand.c linux-2.6.39/drivers/mtd/nand/rb4xx_nand.c +--- linux-2.6.39.orig/drivers/mtd/nand/rb4xx_nand.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/mtd/nand/rb4xx_nand.c 2011-08-23 11:36:58.637983055 +0200 +@@ -0,0 +1,311 @@ +/* -+ * Atheros PB44 board SPI controller driver ++ * NAND flash driver for the MikroTik RouterBoard 4xx series + * -+ * Copyright (C) 2009 Gabor Juhos ++ * Copyright (C) 2008-2011 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. ++ * This file was based on the driver for Linux 2.6.22 published by ++ * MikroTik for their RouterBoard 4xx series devices. + * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. + */ + -+#include +#include -+#include -+#include -+#include ++#include ++#include ++#include +#include ++#include +#include -+#include -+#include -+#include +#include ++#include + +#include -+#include ++#include + -+#define DRV_DESC "Atheros PB44 SPI Controller driver" -+#define DRV_VERSION "0.1.0" -+#define DRV_NAME "pb44-spi" ++#define DRV_NAME "rb4xx-nand" ++#define DRV_VERSION "0.2.0" ++#define DRV_DESC "NAND flash driver for RouterBoard 4xx series" + -+#undef PER_BIT_READ ++#define RB4XX_NAND_GPIO_READY 5 ++#define RB4XX_NAND_GPIO_ALE 37 ++#define RB4XX_NAND_GPIO_CLE 38 ++#define RB4XX_NAND_GPIO_NCE 39 + -+struct ar71xx_spi { -+ struct spi_bitbang bitbang; -+ u32 ioc_base; -+ u32 reg_ctrl; ++struct rb4xx_nand_info { ++ struct nand_chip chip; ++ struct mtd_info mtd; ++}; + -+ void __iomem *base; ++/* ++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader ++ * will not be able to find the kernel that we load. ++ */ ++static struct nand_ecclayout rb4xx_nand_ecclayout = { ++ .eccbytes = 6, ++ .eccpos = { 8, 9, 10, 13, 14, 15 }, ++ .oobavail = 9, ++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } ++}; + -+ struct platform_device *pdev; ++static struct mtd_partition rb4xx_nand_partitions[] = { ++ { ++ .name = "booter", ++ .offset = 0, ++ .size = (256 * 1024), ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "kernel", ++ .offset = (256 * 1024), ++ .size = (6 * 1024 * 1024) - (256 * 1024), ++ }, ++ { ++ .name = "rootfs", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, ++ }, +}; + -+static inline u32 pb44_spi_rr(struct ar71xx_spi *sp, unsigned reg) ++static int rb4xx_nand_dev_ready(struct mtd_info *mtd) +{ -+ return __raw_readl(sp->base + reg); ++ return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY); +} + -+static inline void pb44_spi_wr(struct ar71xx_spi *sp, unsigned reg, u32 val) ++static void rb4xx_nand_write_cmd(unsigned char cmd) +{ -+ __raw_writel(val, sp->base + reg); ++ unsigned char data = cmd; ++ int err; ++ ++ err = rb4xx_cpld_write(&data, 1); ++ if (err) ++ pr_err("rb4xx_nand: write cmd failed, err=%d\n", err); +} + -+static inline struct ar71xx_spi *spidev_to_sp(struct spi_device *spi) ++static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, ++ unsigned int ctrl) +{ -+ return spi_master_get_devdata(spi->master); ++ if (ctrl & NAND_CTRL_CHANGE) { ++ gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE, ++ (ctrl & NAND_CLE) ? 1 : 0); ++ gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE, ++ (ctrl & NAND_ALE) ? 1 : 0); ++ gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE, ++ (ctrl & NAND_NCE) ? 0 : 1); ++ } ++ ++ if (cmd != NAND_CMD_NONE) ++ rb4xx_nand_write_cmd(cmd); +} + -+static void pb44_spi_chipselect(struct spi_device *spi, int is_active) ++static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd) +{ -+ struct ar71xx_spi *sp = spidev_to_sp(spi); -+ int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; ++ unsigned char data = 0; ++ int err; + -+ if (is_active) { -+ /* set initial clock polarity */ -+ if (spi->mode & SPI_CPOL) -+ sp->ioc_base |= SPI_IOC_CLK; -+ else -+ sp->ioc_base &= ~SPI_IOC_CLK; -+ -+ pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base); -+ } -+ -+ if (spi->chip_select) { -+ unsigned long gpio = (unsigned long) spi->controller_data; -+ -+ /* SPI is normally active-low */ -+ gpio_set_value(gpio, cs_high); -+ } else { -+ if (cs_high) -+ sp->ioc_base |= SPI_IOC_CS0; -+ else -+ sp->ioc_base &= ~SPI_IOC_CS0; -+ -+ pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base); -+ } ++ err = rb4xx_cpld_read(&data, NULL, 1); ++ if (err) { ++ pr_err("rb4xx_nand: read data failed, err=%d\n", err); ++ data = 0xff; ++ } + ++ return data; +} + -+static int pb44_spi_setup_cs(struct spi_device *spi) ++static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf, ++ int len) +{ -+ struct ar71xx_spi *sp = spidev_to_sp(spi); -+ -+ /* enable GPIO mode */ -+ pb44_spi_wr(sp, SPI_REG_FS, SPI_FS_GPIO); -+ -+ /* save CTRL register */ -+ sp->reg_ctrl = pb44_spi_rr(sp, SPI_REG_CTRL); -+ sp->ioc_base = pb44_spi_rr(sp, SPI_REG_IOC); -+ -+ /* TODO: setup speed? */ -+ pb44_spi_wr(sp, SPI_REG_CTRL, 0x43); -+ -+ if (spi->chip_select) { -+ unsigned long gpio = (unsigned long) spi->controller_data; -+ int status = 0; -+ -+ status = gpio_request(gpio, dev_name(&spi->dev)); -+ if (status) -+ return status; -+ -+ status = gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH); -+ if (status) { -+ gpio_free(gpio); -+ return status; -+ } -+ } else { -+ if (spi->mode & SPI_CS_HIGH) -+ sp->ioc_base |= SPI_IOC_CS0; -+ else -+ sp->ioc_base &= ~SPI_IOC_CS0; -+ pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base); -+ } ++ int err; + -+ return 0; ++ err = rb4xx_cpld_write(buf, len); ++ if (err) ++ pr_err("rb4xx_nand: write buf failed, err=%d\n", err); +} + -+static void pb44_spi_cleanup_cs(struct spi_device *spi) ++static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf, ++ int len) +{ -+ struct ar71xx_spi *sp = spidev_to_sp(spi); -+ -+ if (spi->chip_select) { -+ unsigned long gpio = (unsigned long) spi->controller_data; -+ gpio_free(gpio); -+ } ++ int err; + -+ /* restore CTRL register */ -+ pb44_spi_wr(sp, SPI_REG_CTRL, sp->reg_ctrl); -+ /* disable GPIO mode */ -+ pb44_spi_wr(sp, SPI_REG_FS, 0); ++ err = rb4xx_cpld_read(buf, NULL, len); ++ if (err) ++ pr_err("rb4xx_nand: read buf failed, err=%d\n", err); +} + -+static int pb44_spi_setup(struct spi_device *spi) ++static int __init rb4xx_nand_probe(struct platform_device *pdev) +{ -+ int status = 0; ++ struct rb4xx_nand_info *info; ++ int ret; + -+ if (spi->bits_per_word > 32) -+ return -EINVAL; ++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); + -+ if (!spi->controller_state) { -+ status = pb44_spi_setup_cs(spi); -+ if (status) -+ return status; ++ ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY"); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to request gpio %d\n", ++ RB4XX_NAND_GPIO_READY); ++ goto err; + } + -+ status = spi_bitbang_setup(spi); -+ if (status && !spi->controller_state) -+ pb44_spi_cleanup_cs(spi); -+ -+ return status; -+} -+ -+static void pb44_spi_cleanup(struct spi_device *spi) -+{ -+ pb44_spi_cleanup_cs(spi); -+ spi_bitbang_cleanup(spi); -+} ++ ret = gpio_direction_input(RB4XX_NAND_GPIO_READY); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set input mode on gpio %d\n", ++ RB4XX_NAND_GPIO_READY); ++ goto err_free_gpio_ready; ++ } + -+static u32 pb44_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, -+ u32 word, u8 bits) -+{ -+ struct ar71xx_spi *sp = spidev_to_sp(spi); -+ u32 ioc = sp->ioc_base; -+ u32 ret; ++ ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE"); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to request gpio %d\n", ++ RB4XX_NAND_GPIO_ALE); ++ goto err_free_gpio_ready; ++ } + -+ /* clock starts at inactive polarity */ -+ for (word <<= (32 - bits); likely(bits); bits--) { -+ u32 out; ++ ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", ++ RB4XX_NAND_GPIO_ALE); ++ goto err_free_gpio_ale; ++ } + -+ if (word & (1 << 31)) -+ out = ioc | SPI_IOC_DO; -+ else -+ out = ioc & ~SPI_IOC_DO; ++ ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE"); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to request gpio %d\n", ++ RB4XX_NAND_GPIO_CLE); ++ goto err_free_gpio_ale; ++ } + -+ /* setup MSB (to slave) on trailing edge */ -+ pb44_spi_wr(sp, SPI_REG_IOC, out); -+ pb44_spi_wr(sp, SPI_REG_IOC, out | SPI_IOC_CLK); ++ ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", ++ RB4XX_NAND_GPIO_CLE); ++ goto err_free_gpio_cle; ++ } + -+ word <<= 1; ++ ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE"); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to request gpio %d\n", ++ RB4XX_NAND_GPIO_NCE); ++ goto err_free_gpio_cle; ++ } + -+#ifdef PER_BIT_READ -+ /* sample MSB (from slave) on leading edge */ -+ ret = pb44_spi_rr(sp, SPI_REG_RDS); -+ pb44_spi_wr(sp, SPI_REG_IOC, out); -+#endif ++ ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set output mode on gpio %d\n", ++ RB4XX_NAND_GPIO_ALE); ++ goto err_free_gpio_nce; + } + -+#ifndef PER_BIT_READ -+ ret = pb44_spi_rr(sp, SPI_REG_RDS); -+#endif -+ return ret; -+} ++ info = kzalloc(sizeof(*info), GFP_KERNEL); ++ if (!info) { ++ dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n"); ++ ret = -ENOMEM; ++ goto err_free_gpio_nce; ++ } + -+static int pb44_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct ar71xx_spi *sp; -+ struct ar71xx_spi_platform_data *pdata; -+ struct resource *r; -+ int ret; ++ info->chip.priv = &info; ++ info->mtd.priv = &info->chip; ++ info->mtd.owner = THIS_MODULE; + -+ master = spi_alloc_master(&pdev->dev, sizeof(*sp)); -+ if (master == NULL) { -+ dev_err(&pdev->dev, "failed to allocate spi master\n"); -+ return -ENOMEM; -+ } ++ info->chip.cmd_ctrl = rb4xx_nand_cmd_ctrl; ++ info->chip.dev_ready = rb4xx_nand_dev_ready; ++ info->chip.read_byte = rb4xx_nand_read_byte; ++ info->chip.write_buf = rb4xx_nand_write_buf; ++ info->chip.read_buf = rb4xx_nand_read_buf; ++#if 0 ++ info->chip.verify_buf = rb4xx_nand_verify_buf; ++#endif + -+ sp = spi_master_get_devdata(master); -+ platform_set_drvdata(pdev, sp); ++ info->chip.chip_delay = 25; ++ info->chip.ecc.mode = NAND_ECC_SOFT; ++ info->chip.options |= NAND_NO_AUTOINCR; + -+ pdata = pdev->dev.platform_data; ++ platform_set_drvdata(pdev, info); + -+ master->setup = pb44_spi_setup; -+ master->cleanup = pb44_spi_cleanup; -+ if (pdata) { -+ master->bus_num = pdata->bus_num; -+ master->num_chipselect = pdata->num_chipselect; -+ } else { -+ master->bus_num = 0; -+ master->num_chipselect = 1; ++ ret = nand_scan_ident(&info->mtd, 1, NULL); ++ if (ret) { ++ ret = -ENXIO; ++ goto err_free_info; + } + -+ sp->bitbang.master = spi_master_get(master); -+ sp->bitbang.chipselect = pb44_spi_chipselect; -+ sp->bitbang.txrx_word[SPI_MODE_0] = pb44_spi_txrx_mode0; -+ sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; -+ sp->bitbang.flags = SPI_CS_HIGH; ++ if (info->mtd.writesize == 512) ++ info->chip.ecc.layout = &rb4xx_nand_ecclayout; + -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (r == NULL) { -+ ret = -ENOENT; -+ goto err1; ++ ret = nand_scan_tail(&info->mtd); ++ if (ret) { ++ return -ENXIO; ++ goto err_set_drvdata; + } + -+ sp->base = ioremap_nocache(r->start, r->end - r->start + 1); -+ if (!sp->base) { -+ ret = -ENXIO; -+ goto err1; -+ } ++#ifdef CONFIG_MTD_PARTITIONS ++ ret = add_mtd_partitions(&info->mtd, rb4xx_nand_partitions, ++ ARRAY_SIZE(rb4xx_nand_partitions)); ++#else ++ ret = add_mtd_device(&info->mtd); ++#endif ++ if (ret) ++ goto err_release_nand; + -+ ret = spi_bitbang_start(&sp->bitbang); -+ if (!ret) -+ return 0; ++ return 0; + -+ iounmap(sp->base); -+ err1: ++err_release_nand: ++ nand_release(&info->mtd); ++err_set_drvdata: + platform_set_drvdata(pdev, NULL); -+ spi_master_put(sp->bitbang.master); -+ ++err_free_info: ++ kfree(info); ++err_free_gpio_nce: ++ gpio_free(RB4XX_NAND_GPIO_NCE); ++err_free_gpio_cle: ++ gpio_free(RB4XX_NAND_GPIO_CLE); ++err_free_gpio_ale: ++ gpio_free(RB4XX_NAND_GPIO_ALE); ++err_free_gpio_ready: ++ gpio_free(RB4XX_NAND_GPIO_READY); ++err: + return ret; +} + -+static int pb44_spi_remove(struct platform_device *pdev) ++static int __devexit rb4xx_nand_remove(struct platform_device *pdev) +{ -+ struct ar71xx_spi *sp = platform_get_drvdata(pdev); ++ struct rb4xx_nand_info *info = platform_get_drvdata(pdev); + -+ spi_bitbang_stop(&sp->bitbang); -+ iounmap(sp->base); ++ nand_release(&info->mtd); + platform_set_drvdata(pdev, NULL); -+ spi_master_put(sp->bitbang.master); ++ kfree(info); ++ gpio_free(RB4XX_NAND_GPIO_NCE); ++ gpio_free(RB4XX_NAND_GPIO_CLE); ++ gpio_free(RB4XX_NAND_GPIO_ALE); ++ gpio_free(RB4XX_NAND_GPIO_READY); + + return 0; +} + -+static struct platform_driver pb44_spi_drv = { -+ .probe = pb44_spi_probe, -+ .remove = pb44_spi_remove, -+ .driver = { ++static struct platform_driver rb4xx_nand_driver = { ++ .probe = rb4xx_nand_probe, ++ .remove = __devexit_p(rb4xx_nand_remove), ++ .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + -+static int __init pb44_spi_init(void) ++static int __init rb4xx_nand_init(void) +{ -+ return platform_driver_register(&pb44_spi_drv); ++ return platform_driver_register(&rb4xx_nand_driver); +} -+module_init(pb44_spi_init); + -+static void __exit pb44_spi_exit(void) ++static void __exit rb4xx_nand_exit(void) +{ -+ platform_driver_unregister(&pb44_spi_drv); ++ platform_driver_unregister(&rb4xx_nand_driver); +} -+module_exit(pb44_spi_exit); + -+MODULE_ALIAS("platform:" DRV_NAME); ++module_init(rb4xx_nand_init); ++module_exit(rb4xx_nand_exit); ++ +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Gabor Juhos "); ++MODULE_AUTHOR("Imre Kaloz "); +MODULE_LICENSE("GPL v2"); -diff -Nur linux-2.6.39.orig/drivers/spi/spi_vsc7385.c linux-2.6.39/drivers/spi/spi_vsc7385.c ---- linux-2.6.39.orig/drivers/spi/spi_vsc7385.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/spi_vsc7385.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,620 @@ +diff -Nur linux-2.6.39.orig/drivers/mtd/nand/rb750_nand.c linux-2.6.39/drivers/mtd/nand/rb750_nand.c +--- linux-2.6.39.orig/drivers/mtd/nand/rb750_nand.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/mtd/nand/rb750_nand.c 2011-04-27 12:19:22.177661504 +0200 +@@ -0,0 +1,361 @@ +/* -+ * SPI driver for the Vitesse VSC7385 ethernet switch -+ * -+ * Copyright (C) 2009 Gabor Juhos ++ * NAND flash driver for the MikroTik RouterBOARD 750 + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Copyright (C) 2010 Gabor Juhos + * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. + */ + -+#include -+#include +#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++#include ++#include ++#include ++#include ++#include ++#include + -+#define DRV_NAME "spi-vsc7385" -+#define DRV_DESC "Vitesse VSC7385 Gbit ethernet switch driver" -+#define DRV_VERSION "0.1.0" ++#include ++#include + -+#define VSC73XX_BLOCK_MAC 0x1 -+#define VSC73XX_BLOCK_2 0x2 -+#define VSC73XX_BLOCK_MII 0x3 -+#define VSC73XX_BLOCK_4 0x4 -+#define VSC73XX_BLOCK_5 0x5 -+#define VSC73XX_BLOCK_SYSTEM 0x7 ++#define DRV_NAME "rb750-nand" ++#define DRV_VERSION "0.1.0" ++#define DRV_DESC "NAND flash driver for the RouterBOARD 750" + -+#define VSC73XX_SUBBLOCK_PORT_0 0 -+#define VSC73XX_SUBBLOCK_PORT_1 1 -+#define VSC73XX_SUBBLOCK_PORT_2 2 -+#define VSC73XX_SUBBLOCK_PORT_3 3 -+#define VSC73XX_SUBBLOCK_PORT_4 4 -+#define VSC73XX_SUBBLOCK_PORT_MAC 6 ++#define RB750_NAND_IO0 BIT(RB750_GPIO_NAND_IO0) ++#define RB750_NAND_ALE BIT(RB750_GPIO_NAND_ALE) ++#define RB750_NAND_CLE BIT(RB750_GPIO_NAND_CLE) ++#define RB750_NAND_NRE BIT(RB750_GPIO_NAND_NRE) ++#define RB750_NAND_NWE BIT(RB750_GPIO_NAND_NWE) ++#define RB750_NAND_RDY BIT(RB750_GPIO_NAND_RDY) ++#define RB750_NAND_NCE BIT(RB750_GPIO_NAND_NCE) + -+/* MAC Block registers */ -+#define VSC73XX_MAC_CFG 0x0 -+#define VSC73XX_ADVPORTM 0x19 -+#define VSC73XX_RXOCT 0x50 -+#define VSC73XX_TXOCT 0x51 -+#define VSC73XX_C_RX0 0x52 -+#define VSC73XX_C_RX1 0x53 -+#define VSC73XX_C_RX2 0x54 -+#define VSC73XX_C_TX0 0x55 -+#define VSC73XX_C_TX1 0x56 -+#define VSC73XX_C_TX2 0x57 -+#define VSC73XX_C_CFG 0x58 ++#define RB750_NAND_DATA_SHIFT 1 ++#define RB750_NAND_DATA_BITS (0xff << RB750_NAND_DATA_SHIFT) ++#define RB750_NAND_INPUT_BITS (RB750_NAND_DATA_BITS | RB750_NAND_RDY) ++#define RB750_NAND_OUTPUT_BITS (RB750_NAND_ALE | RB750_NAND_CLE | \ ++ RB750_NAND_NRE | RB750_NAND_NWE | \ ++ RB750_NAND_NCE) + -+/* MAC_CFG register bits */ -+#define VSC73XX_MAC_CFG_WEXC_DIS (1 << 31) -+#define VSC73XX_MAC_CFG_PORT_RST (1 << 29) -+#define VSC73XX_MAC_CFG_TX_EN (1 << 28) -+#define VSC73XX_MAC_CFG_SEED_LOAD (1 << 27) -+#define VSC73XX_MAC_CFG_FDX (1 << 18) -+#define VSC73XX_MAC_CFG_GIGE (1 << 17) -+#define VSC73XX_MAC_CFG_RX_EN (1 << 16) -+#define VSC73XX_MAC_CFG_VLAN_DBLAWR (1 << 15) -+#define VSC73XX_MAC_CFG_VLAN_AWR (1 << 14) -+#define VSC73XX_MAC_CFG_100_BASE_T (1 << 13) -+#define VSC73XX_MAC_CFG_TX_IPG(x) (((x) & 0x1f) << 6) -+#define VSC73XX_MAC_CFG_MAC_RX_RST (1 << 5) -+#define VSC73XX_MAC_CFG_MAC_TX_RST (1 << 4) -+#define VSC73XX_MAC_CFG_BIT2 (1 << 2) -+#define VSC73XX_MAC_CFG_CLK_SEL(x) ((x) & 0x3) ++struct rb750_nand_info { ++ struct nand_chip chip; ++ struct mtd_info mtd; ++}; + -+/* ADVPORTM register bits */ -+#define VSC73XX_ADVPORTM_IFG_PPM (1 << 7) -+#define VSC73XX_ADVPORTM_EXC_COL_CONT (1 << 6) -+#define VSC73XX_ADVPORTM_EXT_PORT (1 << 5) -+#define VSC73XX_ADVPORTM_INV_GTX (1 << 4) -+#define VSC73XX_ADVPORTM_ENA_GTX (1 << 3) -+#define VSC73XX_ADVPORTM_DDR_MODE (1 << 2) -+#define VSC73XX_ADVPORTM_IO_LOOPBACK (1 << 1) -+#define VSC73XX_ADVPORTM_HOST_LOOPBACK (1 << 0) ++/* ++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader ++ * will not be able to find the kernel that we load. ++ */ ++static struct nand_ecclayout rb750_nand_ecclayout = { ++ .eccbytes = 6, ++ .eccpos = { 8, 9, 10, 13, 14, 15 }, ++ .oobavail = 9, ++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } ++}; + -+/* MII Block registers */ -+#define VSC73XX_MII_STAT 0x0 -+#define VSC73XX_MII_CMD 0x1 -+#define VSC73XX_MII_DATA 0x2 ++static struct mtd_partition rb750_nand_partitions[] = { ++ { ++ .name = "booter", ++ .offset = 0, ++ .size = (256 * 1024), ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "kernel", ++ .offset = (256 * 1024), ++ .size = (4 * 1024 * 1024) - (256 * 1024), ++ }, { ++ .name = "rootfs", ++ .offset = MTDPART_OFS_NXTBLK, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; + -+/* System Block registers */ -+#define VSC73XX_ICPU_SIPAD 0x01 -+#define VSC73XX_ICPU_CLOCK_DELAY 0x05 -+#define VSC73XX_ICPU_CTRL 0x10 -+#define VSC73XX_ICPU_ADDR 0x11 -+#define VSC73XX_ICPU_SRAM 0x12 -+#define VSC73XX_ICPU_MBOX_VAL 0x15 -+#define VSC73XX_ICPU_MBOX_SET 0x16 -+#define VSC73XX_ICPU_MBOX_CLR 0x17 -+#define VSC73XX_ICPU_CHIPID 0x18 -+#define VSC73XX_ICPU_GPIO 0x34 ++static void rb750_nand_write(const u8 *buf, unsigned len) ++{ ++ void __iomem *base = ar71xx_gpio_base; ++ u32 out; ++ unsigned i; + -+#define VSC73XX_ICPU_CTRL_CLK_DIV (1 << 8) -+#define VSC73XX_ICPU_CTRL_SRST_HOLD (1 << 7) -+#define VSC73XX_ICPU_CTRL_BOOT_EN (1 << 3) -+#define VSC73XX_ICPU_CTRL_EXT_ACC_EN (1 << 2) -+#define VSC73XX_ICPU_CTRL_CLK_EN (1 << 1) -+#define VSC73XX_ICPU_CTRL_SRST (1 << 0) ++ /* set data lines to output mode */ ++ __raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_DATA_BITS, ++ base + GPIO_REG_OE); + -+#define VSC73XX_ICPU_CHIPID_ID_SHIFT 12 -+#define VSC73XX_ICPU_CHIPID_ID_MASK 0xffff -+#define VSC73XX_ICPU_CHIPID_REV_SHIFT 28 -+#define VSC73XX_ICPU_CHIPID_REV_MASK 0xf -+#define VSC73XX_ICPU_CHIPID_ID_7385 0x7385 -+#define VSC73XX_ICPU_CHIPID_ID_7395 0x7395 ++ out = __raw_readl(base + GPIO_REG_OUT); ++ out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE); ++ for (i = 0; i != len; i++) { ++ u32 data; + -+#define VSC73XX_CMD_MODE_READ 0 -+#define VSC73XX_CMD_MODE_WRITE 1 -+#define VSC73XX_CMD_MODE_SHIFT 4 -+#define VSC73XX_CMD_BLOCK_SHIFT 5 -+#define VSC73XX_CMD_BLOCK_MASK 0x7 -+#define VSC73XX_CMD_SUBBLOCK_MASK 0xf ++ data = buf[i]; ++ data <<= RB750_NAND_DATA_SHIFT; ++ data |= out; ++ __raw_writel(data, base + GPIO_REG_OUT); + -+#define VSC7385_CLOCK_DELAY ((3 << 4) | 3) -+#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3) ++ __raw_writel(data | RB750_NAND_NWE, base + GPIO_REG_OUT); ++ /* flush write */ ++ __raw_readl(base + GPIO_REG_OUT); ++ } + -+#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \ -+ VSC73XX_ICPU_CTRL_BOOT_EN | \ -+ VSC73XX_ICPU_CTRL_EXT_ACC_EN) ++ /* set data lines to input mode */ ++ __raw_writel(__raw_readl(base + GPIO_REG_OE) & ~RB750_NAND_DATA_BITS, ++ base + GPIO_REG_OE); ++ /* flush write */ ++ __raw_readl(base + GPIO_REG_OE); ++} + -+#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \ -+ VSC73XX_ICPU_CTRL_BOOT_EN | \ -+ VSC73XX_ICPU_CTRL_CLK_EN | \ -+ VSC73XX_ICPU_CTRL_SRST) ++static int rb750_nand_read_verify(u8 *read_buf, unsigned len, ++ const u8 *verify_buf) ++{ ++ void __iomem *base = ar71xx_gpio_base; ++ unsigned i; + -+#define VSC7385_ADVPORTM_MASK (VSC73XX_ADVPORTM_IFG_PPM | \ -+ VSC73XX_ADVPORTM_EXC_COL_CONT | \ -+ VSC73XX_ADVPORTM_EXT_PORT | \ -+ VSC73XX_ADVPORTM_INV_GTX | \ -+ VSC73XX_ADVPORTM_ENA_GTX | \ -+ VSC73XX_ADVPORTM_DDR_MODE | \ -+ VSC73XX_ADVPORTM_IO_LOOPBACK | \ -+ VSC73XX_ADVPORTM_HOST_LOOPBACK) ++ for (i = 0; i < len; i++) { ++ u8 data; + -+#define VSC7385_ADVPORTM_INIT (VSC73XX_ADVPORTM_EXT_PORT | \ -+ VSC73XX_ADVPORTM_ENA_GTX | \ -+ VSC73XX_ADVPORTM_DDR_MODE) ++ /* activate RE line */ ++ __raw_writel(RB750_NAND_NRE, base + GPIO_REG_CLEAR); ++ /* flush write */ ++ __raw_readl(base + GPIO_REG_CLEAR); + -+#define VSC7385_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \ -+ VSC73XX_MAC_CFG_MAC_RX_RST | \ -+ VSC73XX_MAC_CFG_MAC_TX_RST) ++ /* read input lines */ ++ data = __raw_readl(base + GPIO_REG_IN) >> RB750_NAND_DATA_SHIFT; + -+#define VSC73XX_MAC_CFG_INIT (VSC73XX_MAC_CFG_TX_EN | \ -+ VSC73XX_MAC_CFG_FDX | \ -+ VSC73XX_MAC_CFG_GIGE | \ -+ VSC73XX_MAC_CFG_RX_EN) ++ /* deactivate RE line */ ++ __raw_writel(RB750_NAND_NRE, base + GPIO_REG_SET); + -+#define VSC73XX_RESET_DELAY 100 ++ if (read_buf) ++ read_buf[i] = data; ++ else if (verify_buf && verify_buf[i] != data) ++ return -EFAULT; ++ } + -+struct vsc7385 { -+ struct spi_device *spi; -+ struct mutex lock; -+ struct vsc7385_platform_data *pdata; -+}; ++ return 0; ++} + -+static int vsc7385_is_addr_valid(u8 block, u8 subblock) ++static void rb750_nand_select_chip(struct mtd_info *mtd, int chip) +{ -+ switch (block) { -+ case VSC73XX_BLOCK_MAC: -+ switch (subblock) { -+ case 0 ... 4: -+ case 6: -+ return 1; -+ } -+ break; ++ void __iomem *base = ar71xx_gpio_base; ++ u32 func; + -+ case VSC73XX_BLOCK_2: -+ case VSC73XX_BLOCK_SYSTEM: -+ switch (subblock) { -+ case 0: -+ return 1; -+ } -+ break; -+ -+ case VSC73XX_BLOCK_MII: -+ case VSC73XX_BLOCK_4: -+ case VSC73XX_BLOCK_5: -+ switch (subblock) { -+ case 0 ... 1: -+ return 1; -+ } -+ break; -+ } -+ -+ return 0; -+} -+ -+static inline u8 vsc7385_make_addr(u8 mode, u8 block, u8 subblock) -+{ -+ u8 ret; -+ -+ ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT; -+ ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT; -+ ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK; -+ -+ return ret; -+} -+ -+static int vsc7385_read(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg, -+ u32 *value) -+{ -+ u8 cmd[4]; -+ u8 buf[4]; -+ struct spi_transfer t[2]; -+ struct spi_message m; -+ int err; -+ -+ if (!vsc7385_is_addr_valid(block, subblock)) -+ return -EINVAL; -+ -+ spi_message_init(&m); -+ -+ memset(&t, 0, sizeof(t)); ++ func = __raw_readl(base + GPIO_REG_FUNC); ++ if (chip >= 0) { ++ /* disable latch */ ++ rb750_latch_change(RB750_LVC573_LE, 0); + -+ t[0].tx_buf = cmd; -+ t[0].len = sizeof(cmd); -+ spi_message_add_tail(&t[0], &m); ++ /* disable alternate functions */ ++ ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE, ++ AR724X_GPIO_FUNC_SPI_EN); + -+ t[1].rx_buf = buf; -+ t[1].len = sizeof(buf); -+ spi_message_add_tail(&t[1], &m); ++ /* set input mode for data lines */ ++ __raw_writel(__raw_readl(base + GPIO_REG_OE) & ++ ~RB750_NAND_INPUT_BITS, ++ base + GPIO_REG_OE); + -+ cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_READ, block, subblock); -+ cmd[1] = reg; -+ cmd[2] = 0; -+ cmd[3] = 0; ++ /* deactivate RE and WE lines */ ++ __raw_writel(RB750_NAND_NRE | RB750_NAND_NWE, ++ base + GPIO_REG_SET); ++ /* flush write */ ++ (void) __raw_readl(base + GPIO_REG_SET); + -+ mutex_lock(&vsc->lock); -+ err = spi_sync(vsc->spi, &m); -+ mutex_unlock(&vsc->lock); ++ /* activate CE line */ ++ __raw_writel(RB750_NAND_NCE, base + GPIO_REG_CLEAR); ++ } else { ++ /* deactivate CE line */ ++ __raw_writel(RB750_NAND_NCE, base + GPIO_REG_SET); ++ /* flush write */ ++ (void) __raw_readl(base + GPIO_REG_SET); + -+ if (err) -+ return err; ++ __raw_writel(__raw_readl(base + GPIO_REG_OE) | ++ RB750_NAND_IO0 | RB750_NAND_RDY, ++ base + GPIO_REG_OE); + -+ *value = (((u32) buf[0]) << 24) | (((u32) buf[1]) << 16) | -+ (((u32) buf[2]) << 8) | ((u32) buf[3]); ++ /* restore alternate functions */ ++ ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN, ++ AR724X_GPIO_FUNC_JTAG_DISABLE); + -+ return 0; ++ /* enable latch */ ++ rb750_latch_change(0, RB750_LVC573_LE); ++ } +} + -+ -+static int vsc7385_write(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg, -+ u32 value) ++static int rb750_nand_dev_ready(struct mtd_info *mtd) +{ -+ u8 cmd[2]; -+ u8 buf[4]; -+ struct spi_transfer t[2]; -+ struct spi_message m; -+ int err; -+ -+ if (!vsc7385_is_addr_valid(block, subblock)) -+ return -EINVAL; -+ -+ spi_message_init(&m); -+ -+ memset(&t, 0, sizeof(t)); -+ -+ t[0].tx_buf = cmd; -+ t[0].len = sizeof(cmd); -+ spi_message_add_tail(&t[0], &m); -+ -+ t[1].tx_buf = buf; -+ t[1].len = sizeof(buf); -+ spi_message_add_tail(&t[1], &m); -+ -+ cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock); -+ cmd[1] = reg; -+ -+ buf[0] = (value >> 24) & 0xff; -+ buf[1] = (value >> 16) & 0xff; -+ buf[2] = (value >> 8) & 0xff; -+ buf[3] = value & 0xff; -+ -+ mutex_lock(&vsc->lock); -+ err = spi_sync(vsc->spi, &m); -+ mutex_unlock(&vsc->lock); ++ void __iomem *base = ar71xx_gpio_base; + -+ return err; ++ return !!(__raw_readl(base + GPIO_REG_IN) & RB750_NAND_RDY); +} + -+static inline int vsc7385_write_verify(struct vsc7385 *vsc, u8 block, -+ u8 subblock, u8 reg, u32 value, -+ u32 read_mask, u32 read_val) ++static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, ++ unsigned int ctrl) +{ -+ struct spi_device *spi = vsc->spi; -+ u32 t; -+ int err; ++ if (ctrl & NAND_CTRL_CHANGE) { ++ void __iomem *base = ar71xx_gpio_base; ++ u32 t; + -+ err = vsc7385_write(vsc, block, subblock, reg, value); -+ if (err) -+ return err; ++ t = __raw_readl(base + GPIO_REG_OUT); + -+ err = vsc7385_read(vsc, block, subblock, reg, &t); -+ if (err) -+ return err; ++ t &= ~(RB750_NAND_CLE | RB750_NAND_ALE); ++ t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0; ++ t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0; + -+ if ((t & read_mask) != read_val) { -+ dev_err(&spi->dev, "register write error\n"); -+ return -EIO; ++ __raw_writel(t, base + GPIO_REG_OUT); ++ /* flush write */ ++ __raw_readl(base + GPIO_REG_OUT); + } + -+ return 0; ++ if (cmd != NAND_CMD_NONE) { ++ u8 t = cmd; ++ rb750_nand_write(&t, 1); ++ } +} + -+static inline int vsc7385_set_clock_delay(struct vsc7385 *vsc, u32 val) ++static u8 rb750_nand_read_byte(struct mtd_info *mtd) +{ -+ return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, -+ VSC73XX_ICPU_CLOCK_DELAY, val); ++ u8 data = 0; ++ rb750_nand_read_verify(&data, 1, NULL); ++ return data; +} + -+static inline int vsc7385_get_clock_delay(struct vsc7385 *vsc, u32 *val) ++static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len) +{ -+ return vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, -+ VSC73XX_ICPU_CLOCK_DELAY, val); ++ rb750_nand_read_verify(buf, len, NULL); +} + -+static inline int vsc7385_icpu_stop(struct vsc7385 *vsc) ++static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len) +{ -+ return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL, -+ VSC73XX_ICPU_CTRL_STOP); ++ rb750_nand_write(buf, len); +} + -+static inline int vsc7385_icpu_start(struct vsc7385 *vsc) ++static int rb750_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, int len) +{ -+ return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL, -+ VSC73XX_ICPU_CTRL_START); ++ return rb750_nand_read_verify(NULL, len, buf); +} + -+static inline int vsc7385_icpu_reset(struct vsc7385 *vsc) ++static void __init rb750_nand_gpio_init(void) +{ -+ int rc; ++ void __iomem *base = ar71xx_gpio_base; ++ u32 out; + -+ rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_ADDR, -+ 0x0000); -+ if (rc) -+ dev_err(&vsc->spi->dev, -+ "could not reset microcode, err=%d\n", rc); ++ out = __raw_readl(base + GPIO_REG_OUT); + -+ return rc; -+} ++ /* setup output levels */ ++ __raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE, ++ base + GPIO_REG_SET); + -+static int vsc7385_upload_ucode(struct vsc7385 *vsc) -+{ -+ struct spi_device *spi = vsc->spi; -+ const struct firmware *firmware; -+ char *ucode_name; -+ unsigned char *dp; -+ unsigned int curVal; -+ int i; -+ int diffs; -+ int rc; ++ __raw_writel(RB750_NAND_ALE | RB750_NAND_CLE, ++ base + GPIO_REG_CLEAR); + -+ ucode_name = (vsc->pdata->ucode_name) ? vsc->pdata->ucode_name -+ : "vsc7385_ucode.bin"; -+ rc = request_firmware(&firmware, ucode_name, &spi->dev); -+ if (rc) { -+ dev_err(&spi->dev, "request_firmware failed, err=%d\n", -+ rc); -+ return rc; -+ } ++ /* setup input lines */ ++ __raw_writel(__raw_readl(base + GPIO_REG_OE) & ~(RB750_NAND_INPUT_BITS), ++ base + GPIO_REG_OE); + -+ rc = vsc7385_icpu_stop(vsc); -+ if (rc) -+ goto out; ++ /* setup output lines */ ++ __raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_OUTPUT_BITS, ++ base + GPIO_REG_OE); + -+ rc = vsc7385_icpu_reset(vsc); -+ if (rc) -+ goto out; ++ rb750_latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0); ++} + -+ dev_info(&spi->dev, "uploading microcode...\n"); ++static int __init rb750_nand_probe(struct platform_device *pdev) ++{ ++ struct rb750_nand_info *info; ++ int ret; + -+ dp = (unsigned char *) firmware->data; -+ for (i = 0; i < firmware->size; i++) { -+ rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, -+ VSC73XX_ICPU_SRAM, *dp++); -+ if (rc) { -+ dev_err(&spi->dev, "could not load microcode, err=%d\n", -+ rc); -+ goto out; -+ } -+ } ++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); + -+ rc = vsc7385_icpu_reset(vsc); -+ if (rc) -+ goto out; ++ rb750_nand_gpio_init(); + -+ dev_info(&spi->dev, "verifying microcode...\n"); -+ -+ dp = (unsigned char *) firmware->data; -+ diffs = 0; -+ for (i = 0; i < firmware->size; i++) { -+ rc = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, -+ VSC73XX_ICPU_SRAM, &curVal); -+ if (rc) { -+ dev_err(&spi->dev, "could not read microcode %d\n",rc); -+ goto out; -+ } -+ -+ if (curVal > 0xff) { -+ dev_err(&spi->dev, "bad val read: %04x : %02x %02x\n", -+ i, *dp, curVal); -+ rc = -EIO; -+ goto out; -+ } -+ -+ if ((curVal & 0xff) != *dp) { -+ diffs++; -+ dev_err(&spi->dev, "verify error: %04x : %02x %02x\n", -+ i, *dp, curVal); -+ -+ if (diffs > 4) -+ break; -+ } -+ dp++; -+ } -+ -+ if (diffs) { -+ dev_err(&spi->dev, "microcode verification failed\n"); -+ rc = -EIO; -+ goto out; -+ } -+ -+ dev_info(&spi->dev, "microcode uploaded\n"); -+ -+ rc = vsc7385_icpu_start(vsc); -+ -+ out: -+ release_firmware(firmware); -+ return rc; -+} -+ -+static int vsc7385_setup(struct vsc7385 *vsc) -+{ -+ struct vsc7385_platform_data *pdata = vsc->pdata; -+ u32 t; -+ int err; -+ -+ err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_SYSTEM, 0, -+ VSC73XX_ICPU_CLOCK_DELAY, -+ VSC7385_CLOCK_DELAY, -+ VSC7385_CLOCK_DELAY_MASK, -+ VSC7385_CLOCK_DELAY); -+ if (err) -+ goto err; -+ -+ err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_MAC, -+ VSC73XX_SUBBLOCK_PORT_MAC, VSC73XX_ADVPORTM, -+ VSC7385_ADVPORTM_INIT, -+ VSC7385_ADVPORTM_MASK, -+ VSC7385_ADVPORTM_INIT); -+ if (err) -+ goto err; -+ -+ err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC, -+ VSC73XX_MAC_CFG, VSC7385_MAC_CFG_RESET); -+ if (err) -+ goto err; -+ -+ t = VSC73XX_MAC_CFG_INIT; -+ t |= VSC73XX_MAC_CFG_TX_IPG(pdata->mac_cfg.tx_ipg); -+ t |= VSC73XX_MAC_CFG_CLK_SEL(pdata->mac_cfg.clk_sel); -+ if (pdata->mac_cfg.bit2) -+ t |= VSC73XX_MAC_CFG_BIT2; -+ -+ err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC, -+ VSC73XX_MAC_CFG, t); -+ if (err) -+ goto err; -+ -+ return 0; -+ -+ err: -+ return err; -+} -+ -+static int vsc7385_detect(struct vsc7385 *vsc) -+{ -+ struct spi_device *spi = vsc->spi; -+ u32 t; -+ u32 id; -+ u32 rev; -+ int err; -+ -+ err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, -+ VSC73XX_ICPU_MBOX_VAL, &t); -+ if (err) { -+ dev_err(&spi->dev, "unable to read mailbox, err=%d\n", err); -+ return err; -+ } -+ -+ if (t == 0xffffffff) { -+ dev_dbg(&spi->dev, "assert chip reset\n"); -+ if (vsc->pdata->reset) -+ vsc->pdata->reset(); -+ -+ } -+ -+ err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, -+ VSC73XX_ICPU_CHIPID, &t); -+ if (err) { -+ dev_err(&spi->dev, "unable to read chip id, err=%d\n", err); -+ return err; -+ } -+ -+ id = (t >> VSC73XX_ICPU_CHIPID_ID_SHIFT) & VSC73XX_ICPU_CHIPID_ID_MASK; -+ switch (id) { -+ case VSC73XX_ICPU_CHIPID_ID_7385: -+ case VSC73XX_ICPU_CHIPID_ID_7395: -+ break; -+ default: -+ dev_err(&spi->dev, "unsupported chip, id=%04x\n", id); -+ return -ENODEV; -+ } -+ -+ rev = (t >> VSC73XX_ICPU_CHIPID_REV_SHIFT) & -+ VSC73XX_ICPU_CHIPID_REV_MASK; -+ dev_info(&spi->dev, "VSC%04X (rev. %d) switch found \n", id, rev); ++ info = kzalloc(sizeof(*info), GFP_KERNEL); ++ if (!info) ++ return -ENOMEM; + -+ return 0; -+} ++ info->chip.priv = &info; ++ info->mtd.priv = &info->chip; ++ info->mtd.owner = THIS_MODULE; + -+static int __devinit vsc7385_probe(struct spi_device *spi) -+{ -+ struct vsc7385 *vsc; -+ struct vsc7385_platform_data *pdata; -+ int err; ++ info->chip.select_chip = rb750_nand_select_chip; ++ info->chip.cmd_ctrl = rb750_nand_cmd_ctrl; ++ info->chip.dev_ready = rb750_nand_dev_ready; ++ info->chip.read_byte = rb750_nand_read_byte; ++ info->chip.write_buf = rb750_nand_write_buf; ++ info->chip.read_buf = rb750_nand_read_buf; ++ info->chip.verify_buf = rb750_nand_verify_buf; + -+ printk(KERN_INFO DRV_DESC " version " DRV_VERSION"\n"); ++ info->chip.chip_delay = 25; ++ info->chip.ecc.mode = NAND_ECC_SOFT; ++ info->chip.options |= NAND_NO_AUTOINCR; + -+ pdata = spi->dev.platform_data; -+ if (!pdata) { -+ dev_err(&spi->dev, "no platform data specified\n"); -+ return-ENODEV; -+ } ++ platform_set_drvdata(pdev, info); + -+ vsc = kzalloc(sizeof(*vsc), GFP_KERNEL); -+ if (!vsc) { -+ dev_err(&spi->dev, "no memory for private data\n"); -+ return-ENOMEM; ++ ret = nand_scan_ident(&info->mtd, 1); ++ if (ret) { ++ ret = -ENXIO; ++ goto err_free_info; + } + -+ mutex_init(&vsc->lock); -+ vsc->pdata = pdata; -+ vsc->spi = spi_dev_get(spi); -+ dev_set_drvdata(&spi->dev, vsc); -+ -+ spi->mode = SPI_MODE_0; -+ spi->bits_per_word = 8; -+ err = spi_setup(spi); -+ if (err) { -+ dev_err(&spi->dev, "spi_setup failed, err=%d \n", err); -+ goto err_drvdata; -+ } ++ if (info->mtd.writesize == 512) ++ info->chip.ecc.layout = &rb750_nand_ecclayout; + -+ err = vsc7385_detect(vsc); -+ if (err) { -+ dev_err(&spi->dev, "no chip found, err=%d \n", err); -+ goto err_drvdata; ++ ret = nand_scan_tail(&info->mtd); ++ if (ret) { ++ return -ENXIO; ++ goto err_set_drvdata; + } + -+ err = vsc7385_upload_ucode(vsc); -+ if (err) -+ goto err_drvdata; -+ -+ err = vsc7385_setup(vsc); -+ if (err) -+ goto err_drvdata; ++#ifdef CONFIG_MTD_PARTITIONS ++ ret = add_mtd_partitions(&info->mtd, rb750_nand_partitions, ++ ARRAY_SIZE(rb750_nand_partitions)); ++#else ++ ret = add_mtd_device(&info->mtd); ++#endif ++ if (ret) ++ goto err_release_nand; + + return 0; + -+ err_drvdata: -+ dev_set_drvdata(&spi->dev, NULL); -+ kfree(vsc); -+ return err; ++err_release_nand: ++ nand_release(&info->mtd); ++err_set_drvdata: ++ platform_set_drvdata(pdev, NULL); ++err_free_info: ++ kfree(info); ++ return ret; +} + -+static int __devexit vsc7385_remove(struct spi_device *spi) ++static int __devexit rb750_nand_remove(struct platform_device *pdev) +{ -+ struct vsc7385_data *vsc; ++ struct rb750_nand_info *info = platform_get_drvdata(pdev); + -+ vsc = dev_get_drvdata(&spi->dev); -+ dev_set_drvdata(&spi->dev, NULL); -+ kfree(vsc); ++ nand_release(&info->mtd); ++ platform_set_drvdata(pdev, NULL); ++ kfree(info); + + return 0; +} + -+static struct spi_driver vsc7385_driver = { -+ .driver = { -+ .name = DRV_NAME, -+ .bus = &spi_bus_type, -+ .owner = THIS_MODULE, ++static struct platform_driver rb750_nand_driver = { ++ .probe = rb750_nand_probe, ++ .remove = __devexit_p(rb750_nand_remove), ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, + }, -+ .probe = vsc7385_probe, -+ .remove = __devexit_p(vsc7385_remove), +}; + -+static int __init vsc7385_init(void) ++static int __init rb750_nand_init(void) +{ -+ return spi_register_driver(&vsc7385_driver); ++ return platform_driver_register(&rb750_nand_driver); +} -+module_init(vsc7385_init); + -+static void __exit vsc7385_exit(void) ++static void __exit rb750_nand_exit(void) +{ -+ spi_unregister_driver(&vsc7385_driver); ++ platform_driver_unregister(&rb750_nand_driver); +} -+module_exit(vsc7385_exit); ++ ++module_init(rb750_nand_init); ++module_exit(rb750_nand_exit); + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_LICENSE("GPL v2"); -+ -diff -Nur linux-2.6.39.orig/drivers/usb/host/Kconfig linux-2.6.39/drivers/usb/host/Kconfig ---- linux-2.6.39.orig/drivers/usb/host/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/usb/host/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -129,6 +129,13 @@ - config USB_FSL_MPH_DR_OF - tristate - -+config USB_EHCI_AR71XX -+ bool "USB EHCI support for AR71xx" -+ depends on USB_EHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in EHCI controller -+ - config USB_EHCI_FSL - bool "Support for Freescale on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC -@@ -287,6 +294,13 @@ - Enables support for the on-chip OHCI controller on - OMAP3 and later chips. - -+config USB_OHCI_AR71XX -+ bool "USB OHCI support for Atheros AR71xx" -+ depends on USB_OHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in OHCI controller -+ - config USB_OHCI_HCD_PPC_SOC - bool "OHCI support for on-chip PPC USB controller" - depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) -diff -Nur linux-2.6.39.orig/drivers/usb/host/ehci-ar71xx.c linux-2.6.39/drivers/usb/host/ehci-ar71xx.c ---- linux-2.6.39.orig/drivers/usb/host/ehci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/usb/host/ehci-ar71xx.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,242 @@ +diff -Nur linux-2.6.39.orig/drivers/mtd/wrt160nl_part.c linux-2.6.39/drivers/mtd/wrt160nl_part.c +--- linux-2.6.39.orig/drivers/mtd/wrt160nl_part.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/mtd/wrt160nl_part.c 2011-08-06 09:32:37.138017083 +0200 +@@ -0,0 +1,190 @@ +/* -+ * Bus Glue for Atheros AR71xx built-in EHCI controller. ++ * Copyright (C) 2009 Christian Daniel ++ * Copyright (C) 2009 Gabor Juhos + * -+ * Copyright (C) 2008-2010 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. + * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * Copyright (C) 2007 Atheros Communications, Inc. ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ++ * ++ * TRX flash partition table. ++ * Based on ar7 map by Felix Fietkau + * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. + */ + -+#include -+#include ++#include ++#include ++#include + -+#include ++#include ++#include + -+extern int usb_disabled(void); ++struct cybertan_header { ++ char magic[4]; ++ u8 res1[4]; ++ char fw_date[3]; ++ char fw_ver[3]; ++ char id[4]; ++ char hw_ver; ++ char unused; ++ u8 flags[2]; ++ u8 res2[10]; ++}; + -+static int ehci_ar71xx_init(struct usb_hcd *hcd) -+{ -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); -+ int ret; ++#define TRX_PARTS 6 ++#define TRX_MAGIC 0x30524448 ++#define TRX_MAX_OFFSET 3 + -+ ehci->caps = hcd->regs; -+ ehci->regs = hcd->regs + -+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); -+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); ++struct trx_header { ++ uint32_t magic; /* "HDR0" */ ++ uint32_t len; /* Length of file including header */ ++ uint32_t crc32; /* 32-bit CRC from flag_version to end of file */ ++ uint32_t flag_version; /* 0:15 flags, 16:31 version */ ++ uint32_t offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ ++}; + -+ ehci->sbrn = 0x20; -+ ehci->has_synopsys_hc_bug = 1; ++#define IH_MAGIC 0x27051956 /* Image Magic Number */ ++#define IH_NMLEN 32 /* Image Name Length */ + -+ ehci_reset(ehci); ++struct uimage_header { ++ uint32_t ih_magic; /* Image Header Magic Number */ ++ uint32_t ih_hcrc; /* Image Header CRC Checksum */ ++ uint32_t ih_time; /* Image Creation Timestamp */ ++ uint32_t ih_size; /* Image Data Size */ ++ uint32_t ih_load; /* Data» Load Address */ ++ uint32_t ih_ep; /* Entry Point Address */ ++ uint32_t ih_dcrc; /* Image Data CRC Checksum */ ++ uint8_t ih_os; /* Operating System */ ++ uint8_t ih_arch; /* CPU architecture */ ++ uint8_t ih_type; /* Image Type */ ++ uint8_t ih_comp; /* Compression Type */ ++ uint8_t ih_name[IH_NMLEN]; /* Image Name */ ++}; + -+ ret = ehci_init(hcd); -+ if (ret) -+ return ret; ++struct wrt160nl_header { ++ struct cybertan_header cybertan; ++ struct trx_header trx; ++ struct uimage_header uimage; ++} __attribute__ ((packed)); + -+ ehci_port_power(ehci, 0); ++static struct mtd_partition trx_parts[TRX_PARTS]; + -+ return 0; -+} ++#define WRT160NL_UBOOT_LEN 0x40000 ++#define WRT160NL_ART_LEN 0x10000 ++#define WRT160NL_NVRAM_LEN 0x10000 + -+static int ehci_ar91xx_init(struct usb_hcd *hcd) ++static int wrt160nl_parse_partitions(struct mtd_info *master, ++ struct mtd_partition **pparts, ++ unsigned long origin) +{ -+ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ struct wrt160nl_header *header; ++ struct trx_header *theader; ++ struct uimage_header *uheader; ++ size_t retlen; ++ unsigned int kernel_len; ++ unsigned int uboot_len = max(master->erasesize, WRT160NL_UBOOT_LEN); ++ unsigned int nvram_len = max(master->erasesize, WRT160NL_NVRAM_LEN); ++ unsigned int art_len = max(master->erasesize, WRT160NL_ART_LEN); + int ret; + -+ ehci->caps = hcd->regs + 0x100; -+ ehci->regs = hcd->regs + 0x100 + -+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); -+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); -+ -+ hcd->has_tt = 1; -+ ehci->sbrn = 0x20; -+ -+ ehci_reset(ehci); ++ header = vmalloc(sizeof(*header)); ++ if (!header) { ++ return -ENOMEM; ++ goto out; ++ } + -+ ret = ehci_init(hcd); ++ ret = master->read(master, uboot_len, sizeof(*header), ++ &retlen, (void *) header); + if (ret) -+ return ret; -+ -+ ehci_port_power(ehci, 0); ++ goto free_hdr; + -+ return 0; -+} ++ if (retlen != sizeof(*header)) { ++ ret = -EIO; ++ goto free_hdr; ++ } + -+static int ehci_ar71xx_probe(const struct hc_driver *driver, -+ struct usb_hcd **hcd_out, -+ struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd; -+ struct resource *res; -+ int irq; -+ int ret; ++ if (strncmp(header->cybertan.magic, "NL16", 4) != 0) { ++ printk(KERN_NOTICE "%s: no WRT160NL signature found\n", ++ master->name); ++ goto free_hdr; ++ } + -+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ if (!res) { -+ dev_dbg(&pdev->dev, "no IRQ specified for %s\n", -+ dev_name(&pdev->dev)); -+ return -ENODEV; ++ theader = &header->trx; ++ if (le32_to_cpu(theader->magic) != TRX_MAGIC) { ++ printk(KERN_NOTICE "%s: no TRX header found\n", master->name); ++ goto free_hdr; + } -+ irq = res->start; + -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_dbg(&pdev->dev, "no base address specified for %s\n", -+ dev_name(&pdev->dev)); -+ return -ENODEV; ++ uheader = &header->uimage; ++ if (uheader->ih_magic != IH_MAGIC) { ++ printk(KERN_NOTICE "%s: no uImage found\n", master->name); ++ goto free_hdr; + } + -+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); -+ if (!hcd) -+ return -ENOMEM; ++ kernel_len = le32_to_cpu(theader->offsets[1]) + ++ sizeof(struct cybertan_header); + -+ hcd->rsrc_start = res->start; -+ hcd->rsrc_len = res->end - res->start + 1; ++ trx_parts[0].name = "u-boot"; ++ trx_parts[0].offset = 0; ++ trx_parts[0].size = uboot_len; ++ trx_parts[0].mask_flags = MTD_WRITEABLE; + -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ dev_dbg(&pdev->dev, "controller already in use\n"); -+ ret = -EBUSY; -+ goto err_put_hcd; -+ } ++ trx_parts[1].name = "kernel"; ++ trx_parts[1].offset = trx_parts[0].offset + trx_parts[0].size; ++ trx_parts[1].size = kernel_len; ++ trx_parts[1].mask_flags = 0; + -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ dev_dbg(&pdev->dev, "error mapping memory\n"); -+ ret = -EFAULT; -+ goto err_release_region; -+ } ++ trx_parts[2].name = "rootfs"; ++ trx_parts[2].offset = trx_parts[1].offset + trx_parts[1].size; ++ trx_parts[2].size = master->size - uboot_len - nvram_len - art_len - ++ trx_parts[1].size; ++ trx_parts[2].mask_flags = 0; + -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); -+ if (ret) -+ goto err_iounmap; ++ trx_parts[3].name = "nvram"; ++ trx_parts[3].offset = master->size - nvram_len - art_len; ++ trx_parts[3].size = nvram_len; ++ trx_parts[3].mask_flags = MTD_WRITEABLE; + -+ return 0; ++ trx_parts[4].name = "art"; ++ trx_parts[4].offset = master->size - art_len; ++ trx_parts[4].size = art_len; ++ trx_parts[4].mask_flags = MTD_WRITEABLE; + -+ err_iounmap: -+ iounmap(hcd->regs); ++ trx_parts[5].name = "firmware"; ++ trx_parts[5].offset = uboot_len; ++ trx_parts[5].size = master->size - uboot_len - nvram_len - art_len; ++ trx_parts[5].mask_flags = 0; + -+ err_release_region: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ err_put_hcd: -+ usb_put_hcd(hcd); ++ *pparts = trx_parts; ++ ret = TRX_PARTS; ++ ++free_hdr: ++ vfree(header); ++out: + return ret; +} + -+static void ehci_ar71xx_remove(struct usb_hcd *hcd, -+ struct platform_device *pdev) ++static struct mtd_part_parser wrt160nl_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = wrt160nl_parse_partitions, ++ .name = "wrt160nl", ++}; ++ ++static int __init wrt160nl_parser_init(void) +{ -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ usb_put_hcd(hcd); ++ return register_mtd_parser(&wrt160nl_parser); +} + -+static const struct hc_driver ehci_ar71xx_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "Atheros AR71xx built-in EHCI controller", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ -+ .irq = ehci_irq, -+ .flags = HCD_MEMORY | HCD_USB2, -+ -+ .reset = ehci_ar71xx_init, -+ .start = ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_shutdown, ++module_init(wrt160nl_parser_init); + -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ .endpoint_reset = ehci_endpoint_reset, ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Christian Daniel "); +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar7240.c linux-2.6.39/drivers/net/ag71xx/ag71xx_ar7240.c +--- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar7240.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ar7240.c 2011-08-06 09:32:37.298018216 +0200 +@@ -0,0 +1,913 @@ ++/* ++ * Driver for the built-in ethernet switch of the Atheros AR7240 SoC ++ * Copyright (c) 2010 Gabor Juhos ++ * Copyright (c) 2010 Felix Fietkau ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ + -+ .get_frame_number = ehci_get_frame, ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "ag71xx.h" + -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+#ifdef CONFIG_PM -+ .hub_suspend = ehci_hub_suspend, -+ .hub_resume = ehci_hub_resume, -+#endif -+ .relinquish_port = ehci_relinquish_port, -+ .port_handed_over = ehci_port_handed_over, ++#define BITM(_count) (BIT(_count) - 1) ++#define BITS(_shift, _count) (BITM(_count) << _shift) + -+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -+}; ++#define AR7240_REG_MASK_CTRL 0x00 ++#define AR7240_MASK_CTRL_REVISION_M BITM(8) ++#define AR7240_MASK_CTRL_VERSION_M BITM(8) ++#define AR7240_MASK_CTRL_VERSION_S 8 ++#define AR7240_MASK_CTRL_SOFT_RESET BIT(31) + -+static const struct hc_driver ehci_ar91xx_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "Atheros AR91xx built-in EHCI controller", -+ .hcd_priv_size = sizeof(struct ehci_hcd), -+ .irq = ehci_irq, -+ .flags = HCD_MEMORY | HCD_USB2, ++#define AR7240_REG_MAC_ADDR0 0x20 ++#define AR7240_REG_MAC_ADDR1 0x24 + -+ .reset = ehci_ar91xx_init, -+ .start = ehci_run, -+ .stop = ehci_stop, -+ .shutdown = ehci_shutdown, ++#define AR7240_REG_FLOOD_MASK 0x2c ++#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26) + -+ .urb_enqueue = ehci_urb_enqueue, -+ .urb_dequeue = ehci_urb_dequeue, -+ .endpoint_disable = ehci_endpoint_disable, -+ .endpoint_reset = ehci_endpoint_reset, ++#define AR7240_REG_GLOBAL_CTRL 0x30 ++#define AR7240_GLOBAL_CTRL_MTU_M BITM(12) + -+ .get_frame_number = ehci_get_frame, ++#define AR7240_REG_VTU 0x0040 ++#define AR7240_VTU_OP BITM(3) ++#define AR7240_VTU_OP_NOOP 0x0 ++#define AR7240_VTU_OP_FLUSH 0x1 ++#define AR7240_VTU_OP_LOAD 0x2 ++#define AR7240_VTU_OP_PURGE 0x3 ++#define AR7240_VTU_OP_REMOVE_PORT 0x4 ++#define AR7240_VTU_ACTIVE BIT(3) ++#define AR7240_VTU_FULL BIT(4) ++#define AR7240_VTU_PORT BITS(8, 4) ++#define AR7240_VTU_PORT_S 8 ++#define AR7240_VTU_VID BITS(16, 12) ++#define AR7240_VTU_VID_S 16 ++#define AR7240_VTU_PRIO BITS(28, 3) ++#define AR7240_VTU_PRIO_S 28 ++#define AR7240_VTU_PRIO_EN BIT(31) ++ ++#define AR7240_REG_VTU_DATA 0x0044 ++#define AR7240_VTUDATA_MEMBER BITS(0, 10) ++#define AR7240_VTUDATA_VALID BIT(11) ++ ++#define AR7240_REG_ATU 0x50 ++#define AR7240_ATU_FLUSH_ALL 0x1 + -+ .hub_status_data = ehci_hub_status_data, -+ .hub_control = ehci_hub_control, -+#ifdef CONFIG_PM -+ .hub_suspend = ehci_hub_suspend, -+ .hub_resume = ehci_hub_resume, -+#endif -+ .relinquish_port = ehci_relinquish_port, -+ .port_handed_over = ehci_port_handed_over, ++#define AR7240_REG_AT_CTRL 0x5c ++#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15) ++#define AR7240_AT_CTRL_AGE_EN BIT(17) ++#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18) ++#define AR7240_AT_CTRL_ARP_EN BIT(20) + -+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -+}; ++#define AR7240_REG_TAG_PRIORITY 0x70 + -+static int ehci_ar71xx_driver_probe(struct platform_device *pdev) -+{ -+ struct ar71xx_ehci_platform_data *pdata; -+ struct usb_hcd *hcd = NULL; -+ int ret; ++#define AR7240_REG_SERVICE_TAG 0x74 ++#define AR7240_SERVICE_TAG_M BITM(16) + -+ if (usb_disabled()) -+ return -ENODEV; ++#define AR7240_REG_CPU_PORT 0x78 ++#define AR7240_MIRROR_PORT_S 4 ++#define AR7240_CPU_PORT_EN BIT(8) + -+ pdata = pdev->dev.platform_data; -+ if (!pdata) { -+ dev_err(&pdev->dev, "no platform data specified for %s\n", -+ dev_name(&pdev->dev)); -+ return -ENODEV; -+ } ++#define AR7240_REG_MIB_FUNCTION0 0x80 ++#define AR7240_MIB_TIMER_M BITM(16) ++#define AR7240_MIB_AT_HALF_EN BIT(16) ++#define AR7240_MIB_BUSY BIT(17) ++#define AR7240_MIB_FUNC_S 24 ++#define AR7240_MIB_FUNC_NO_OP 0x0 ++#define AR7240_MIB_FUNC_FLUSH 0x1 ++#define AR7240_MIB_FUNC_CAPTURE 0x3 + -+ if (pdata->is_ar91xx) -+ ret = ehci_ar71xx_probe(&ehci_ar91xx_hc_driver, &hcd, pdev); -+ else -+ ret = ehci_ar71xx_probe(&ehci_ar71xx_hc_driver, &hcd, pdev); ++#define AR7240_REG_MDIO_CTRL 0x98 ++#define AR7240_MDIO_CTRL_DATA_M BITM(16) ++#define AR7240_MDIO_CTRL_REG_ADDR_S 16 ++#define AR7240_MDIO_CTRL_PHY_ADDR_S 21 ++#define AR7240_MDIO_CTRL_CMD_WRITE 0 ++#define AR7240_MDIO_CTRL_CMD_READ BIT(27) ++#define AR7240_MDIO_CTRL_MASTER_EN BIT(30) ++#define AR7240_MDIO_CTRL_BUSY BIT(31) + -+ return ret; -+} ++#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) + -+static int ehci_ar71xx_driver_remove(struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(pdev); ++#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00) ++#define AR7240_PORT_STATUS_SPEED_M BITM(2) ++#define AR7240_PORT_STATUS_SPEED_10 0 ++#define AR7240_PORT_STATUS_SPEED_100 1 ++#define AR7240_PORT_STATUS_SPEED_1000 2 ++#define AR7240_PORT_STATUS_TXMAC BIT(2) ++#define AR7240_PORT_STATUS_RXMAC BIT(3) ++#define AR7240_PORT_STATUS_TXFLOW BIT(4) ++#define AR7240_PORT_STATUS_RXFLOW BIT(5) ++#define AR7240_PORT_STATUS_DUPLEX BIT(6) ++#define AR7240_PORT_STATUS_LINK_UP BIT(8) ++#define AR7240_PORT_STATUS_LINK_AUTO BIT(9) ++#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10) + -+ ehci_ar71xx_remove(hcd, pdev); -+ return 0; -+} ++#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04) ++#define AR7240_PORT_CTRL_STATE_M BITM(3) ++#define AR7240_PORT_CTRL_STATE_DISABLED 0 ++#define AR7240_PORT_CTRL_STATE_BLOCK 1 ++#define AR7240_PORT_CTRL_STATE_LISTEN 2 ++#define AR7240_PORT_CTRL_STATE_LEARN 3 ++#define AR7240_PORT_CTRL_STATE_FORWARD 4 ++#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7) ++#define AR7240_PORT_CTRL_VLAN_MODE_S 8 ++#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0 ++#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1 ++#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2 ++#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3 ++#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10) ++#define AR7240_PORT_CTRL_HEADER BIT(11) ++#define AR7240_PORT_CTRL_MAC_LOOP BIT(12) ++#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13) ++#define AR7240_PORT_CTRL_LEARN BIT(14) ++#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15) ++#define AR7240_PORT_CTRL_MIRROR_TX BIT(16) ++#define AR7240_PORT_CTRL_MIRROR_RX BIT(17) + -+MODULE_ALIAS("platform:ar71xx-ehci"); ++#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08) + -+static struct platform_driver ehci_ar71xx_driver = { -+ .probe = ehci_ar71xx_driver_probe, -+ .remove = ehci_ar71xx_driver_remove, -+ .driver = { -+ .name = "ar71xx-ehci", -+ } -+}; -diff -Nur linux-2.6.39.orig/drivers/usb/host/ehci-hcd.c linux-2.6.39/drivers/usb/host/ehci-hcd.c ---- linux-2.6.39.orig/drivers/usb/host/ehci-hcd.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/usb/host/ehci-hcd.c 2011-05-27 14:36:51.000000000 +0200 -@@ -1265,6 +1265,11 @@ - #define PLATFORM_DRIVER tegra_ehci_driver - #endif - -+#ifdef CONFIG_USB_EHCI_AR71XX -+#include "ehci-ar71xx.c" -+#define PLATFORM_DRIVER ehci_ar71xx_driver -+#endif ++#define AR7240_PORT_VLAN_DEFAULT_ID_S 0 ++#define AR7240_PORT_VLAN_DEST_PORTS_S 16 ++#define AR7240_PORT_VLAN_MODE_S 30 ++#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0 ++#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1 ++#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2 ++#define AR7240_PORT_VLAN_MODE_SECURE 3 + - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ - !defined(XILINX_OF_PLATFORM_DRIVER) -diff -Nur linux-2.6.39.orig/drivers/usb/host/ohci-ar71xx.c linux-2.6.39/drivers/usb/host/ohci-ar71xx.c ---- linux-2.6.39.orig/drivers/usb/host/ohci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/usb/host/ohci-ar71xx.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,165 @@ -+/* -+ * OHCI HCD (Host Controller Driver) for USB. -+ * -+ * Bus Glue for Atheros AR71xx built-in OHCI controller. -+ * -+ * Copyright (C) 2008 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * Copyright (C) 2007 Atheros Communications, Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ + -+#include -+#include ++#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100) + -+extern int usb_disabled(void); ++#define AR7240_STATS_RXBROAD 0x00 ++#define AR7240_STATS_RXPAUSE 0x04 ++#define AR7240_STATS_RXMULTI 0x08 ++#define AR7240_STATS_RXFCSERR 0x0c ++#define AR7240_STATS_RXALIGNERR 0x10 ++#define AR7240_STATS_RXRUNT 0x14 ++#define AR7240_STATS_RXFRAGMENT 0x18 ++#define AR7240_STATS_RX64BYTE 0x1c ++#define AR7240_STATS_RX128BYTE 0x20 ++#define AR7240_STATS_RX256BYTE 0x24 ++#define AR7240_STATS_RX512BYTE 0x28 ++#define AR7240_STATS_RX1024BYTE 0x2c ++#define AR7240_STATS_RX1518BYTE 0x30 ++#define AR7240_STATS_RXMAXBYTE 0x34 ++#define AR7240_STATS_RXTOOLONG 0x38 ++#define AR7240_STATS_RXGOODBYTE 0x3c ++#define AR7240_STATS_RXBADBYTE 0x44 ++#define AR7240_STATS_RXOVERFLOW 0x4c ++#define AR7240_STATS_FILTERED 0x50 ++#define AR7240_STATS_TXBROAD 0x54 ++#define AR7240_STATS_TXPAUSE 0x58 ++#define AR7240_STATS_TXMULTI 0x5c ++#define AR7240_STATS_TXUNDERRUN 0x60 ++#define AR7240_STATS_TX64BYTE 0x64 ++#define AR7240_STATS_TX128BYTE 0x68 ++#define AR7240_STATS_TX256BYTE 0x6c ++#define AR7240_STATS_TX512BYTE 0x70 ++#define AR7240_STATS_TX1024BYTE 0x74 ++#define AR7240_STATS_TX1518BYTE 0x78 ++#define AR7240_STATS_TXMAXBYTE 0x7c ++#define AR7240_STATS_TXOVERSIZE 0x80 ++#define AR7240_STATS_TXBYTE 0x84 ++#define AR7240_STATS_TXCOLLISION 0x8c ++#define AR7240_STATS_TXABORTCOL 0x90 ++#define AR7240_STATS_TXMULTICOL 0x94 ++#define AR7240_STATS_TXSINGLECOL 0x98 ++#define AR7240_STATS_TXEXCDEFER 0x9c ++#define AR7240_STATS_TXDEFER 0xa0 ++#define AR7240_STATS_TXLATECOL 0xa4 + -+static int usb_hcd_ar71xx_probe(const struct hc_driver *driver, -+ struct platform_device *pdev) -+{ -+ struct usb_hcd *hcd; -+ struct resource *res; -+ int irq; -+ int ret; ++#define AR7240_PORT_CPU 0 ++#define AR7240_NUM_PORTS 6 ++#define AR7240_NUM_PHYS 5 + -+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -+ if (!res) { -+ dev_dbg(&pdev->dev, "no IRQ specified for %s\n", -+ dev_name(&pdev->dev)); -+ return -ENODEV; -+ } -+ irq = res->start; ++#define AR7240_PHY_ID1 0x004d ++#define AR7240_PHY_ID2 0xd041 + -+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); -+ if (!hcd) -+ return -ENOMEM; ++#define AR7240_PORT_MASK(_port) BIT((_port)) ++#define AR7240_PORT_MASK_ALL BITM(AR7240_NUM_PORTS) ++#define AR7240_PORT_MASK_BUT(_port) (AR7240_PORT_MASK_ALL & ~BIT((_port))) + -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_dbg(&pdev->dev, "no base address specified for %s\n", -+ dev_name(&pdev->dev)); -+ ret = -ENODEV; -+ goto err_put_hcd; -+ } -+ hcd->rsrc_start = res->start; -+ hcd->rsrc_len = res->end - res->start + 1; ++#define AR7240_MAX_VLANS 16 + -+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { -+ dev_dbg(&pdev->dev, "controller already in use\n"); -+ ret = -EBUSY; -+ goto err_put_hcd; -+ } ++#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev) + -+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) { -+ dev_dbg(&pdev->dev, "error mapping memory\n"); -+ ret = -EFAULT; -+ goto err_release_region; -+ } ++struct ar7240sw { ++ struct mii_bus *mii_bus; ++ struct switch_dev swdev; ++ bool vlan; ++ u16 vlan_id[AR7240_MAX_VLANS]; ++ u8 vlan_table[AR7240_MAX_VLANS]; ++ u8 vlan_tagged; ++ u16 pvid[AR7240_NUM_PORTS]; ++}; + -+ ohci_hcd_init(hcd_to_ohci(hcd)); ++struct ar7240sw_hw_stat { ++ char string[ETH_GSTRING_LEN]; ++ int sizeof_stat; ++ int reg; ++}; + -+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); -+ if (ret) -+ goto err_stop_hcd; ++static DEFINE_MUTEX(reg_mutex); + -+ return 0; ++static inline void ar7240sw_init(struct ar7240sw *as, struct mii_bus *mii) ++{ ++ as->mii_bus = mii; ++} + -+ err_stop_hcd: -+ iounmap(hcd->regs); -+ err_release_region: -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ err_put_hcd: -+ usb_put_hcd(hcd); -+ return ret; ++static inline u16 mk_phy_addr(u32 reg) ++{ ++ return 0x17 & ((reg >> 4) | 0x10); +} + -+void usb_hcd_ar71xx_remove(struct usb_hcd *hcd, struct platform_device *pdev) ++static inline u16 mk_phy_reg(u32 reg) +{ -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -+ usb_put_hcd(hcd); ++ return (reg << 1) & 0x1e; +} + -+static int __devinit ohci_ar71xx_start(struct usb_hcd *hcd) ++static inline u16 mk_high_addr(u32 reg) +{ -+ struct ohci_hcd *ohci = hcd_to_ohci(hcd); -+ int ret; ++ return (reg >> 7) & 0x1ff; ++} + -+ ret = ohci_init(ohci); -+ if (ret < 0) -+ return ret; ++static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg) ++{ ++ unsigned long flags; ++ u16 phy_addr; ++ u16 phy_reg; ++ u32 hi, lo; + -+ ret = ohci_run(ohci); -+ if (ret < 0) -+ goto err; ++ reg = (reg & 0xfffffffc) >> 2; ++ phy_addr = mk_phy_addr(reg); ++ phy_reg = mk_phy_reg(reg); + -+ return 0; ++ local_irq_save(flags); ++ ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg)); ++ lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg); ++ hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1); ++ local_irq_restore(flags); + -+ err: -+ ohci_stop(hcd); -+ return ret; ++ return (hi << 16) | lo; +} + -+static const struct hc_driver ohci_ar71xx_hc_driver = { -+ .description = hcd_name, -+ .product_desc = "Atheros AR71xx built-in OHCI controller", -+ .hcd_priv_size = sizeof(struct ohci_hcd), ++static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val) ++{ ++ unsigned long flags; ++ u16 phy_addr; ++ u16 phy_reg; + -+ .irq = ohci_irq, -+ .flags = HCD_USB11 | HCD_MEMORY, ++ reg = (reg & 0xfffffffc) >> 2; ++ phy_addr = mk_phy_addr(reg); ++ phy_reg = mk_phy_reg(reg); + -+ .start = ohci_ar71xx_start, -+ .stop = ohci_stop, -+ .shutdown = ohci_shutdown, ++ local_irq_save(flags); ++ ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg)); ++ ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16)); ++ ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff)); ++ local_irq_restore(flags); ++} + -+ .urb_enqueue = ohci_urb_enqueue, -+ .urb_dequeue = ohci_urb_dequeue, -+ .endpoint_disable = ohci_endpoint_disable, ++static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr) ++{ ++ u32 ret; + -+ /* -+ * scheduling support -+ */ -+ .get_frame_number = ohci_get_frame, ++ mutex_lock(®_mutex); ++ ret = __ar7240sw_reg_read(mii, reg_addr); ++ mutex_unlock(®_mutex); + -+ /* -+ * root hub support -+ */ -+ .hub_status_data = ohci_hub_status_data, -+ .hub_control = ohci_hub_control, -+ .start_port_reset = ohci_start_port_reset, -+}; ++ return ret; ++} + -+static int ohci_hcd_ar71xx_drv_probe(struct platform_device *pdev) ++static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val) +{ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ return usb_hcd_ar71xx_probe(&ohci_ar71xx_hc_driver, pdev); ++ mutex_lock(®_mutex); ++ __ar7240sw_reg_write(mii, reg_addr, reg_val); ++ mutex_unlock(®_mutex); +} + -+static int ohci_hcd_ar71xx_drv_remove(struct platform_device *pdev) ++static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val) +{ -+ struct usb_hcd *hcd = platform_get_drvdata(pdev); ++ u32 t; + -+ usb_hcd_ar71xx_remove(hcd, pdev); -+ return 0; ++ mutex_lock(®_mutex); ++ t = __ar7240sw_reg_read(mii, reg); ++ t &= ~mask; ++ t |= val; ++ __ar7240sw_reg_write(mii, reg, t); ++ mutex_unlock(®_mutex); ++ ++ return t; +} + -+MODULE_ALIAS("platform:ar71xx-ohci"); ++static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val) ++{ ++ u32 t; + -+static struct platform_driver ohci_hcd_ar71xx_driver = { -+ .probe = ohci_hcd_ar71xx_drv_probe, -+ .remove = ohci_hcd_ar71xx_drv_remove, -+ .shutdown = usb_hcd_platform_shutdown, -+ .driver = { -+ .name = "ar71xx-ohci", -+ .owner = THIS_MODULE, -+ }, -+}; -diff -Nur linux-2.6.39.orig/drivers/usb/host/ohci-hcd.c linux-2.6.39/drivers/usb/host/ohci-hcd.c ---- linux-2.6.39.orig/drivers/usb/host/ohci-hcd.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/usb/host/ohci-hcd.c 2011-05-27 14:36:51.000000000 +0200 -@@ -1105,6 +1105,11 @@ - #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver - #endif - -+#ifdef CONFIG_USB_OHCI_AR71XX -+#include "ohci-ar71xx.c" -+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver -+#endif ++ mutex_lock(®_mutex); ++ t = __ar7240sw_reg_read(mii, reg); ++ t |= val; ++ __ar7240sw_reg_write(mii, reg, t); ++ mutex_unlock(®_mutex); ++} + - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OMAP1_PLATFORM_DRIVER) && \ -diff -Nur linux-2.6.39.orig/drivers/watchdog/Kconfig linux-2.6.39/drivers/watchdog/Kconfig ---- linux-2.6.39.orig/drivers/watchdog/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/watchdog/Kconfig 2011-05-27 14:36:51.000000000 +0200 -@@ -990,6 +990,13 @@ - To compile this driver as a loadable module, choose M here. - The module will be called bcm63xx_wdt. - -+config AR71XX_WDT -+ tristate "Atheros AR71xx Watchdog Timer" -+ depends on ATHEROS_AR71XX -+ help -+ Hardware driver for the built-in watchdog timer on the Atheros -+ AR71xx SoCs. ++static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, ++ unsigned timeout) ++{ ++ int i; + - # PARISC Architecture - - # POWERPC Architecture -diff -Nur linux-2.6.39.orig/drivers/watchdog/Makefile linux-2.6.39/drivers/watchdog/Makefile ---- linux-2.6.39.orig/drivers/watchdog/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/watchdog/Makefile 2011-05-27 14:36:51.000000000 +0200 -@@ -121,6 +121,7 @@ - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o - obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o - octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o - -diff -Nur linux-2.6.39.orig/drivers/watchdog/ar71xx_wdt.c linux-2.6.39/drivers/watchdog/ar71xx_wdt.c ---- linux-2.6.39.orig/drivers/watchdog/ar71xx_wdt.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/watchdog/ar71xx_wdt.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,270 @@ -+/* -+ * Driver for the Atheros AR71xx SoC's built-in hardware watchdog timer. -+ * -+ * Copyright (C) 2008 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This driver was based on: drivers/watchdog/ixp4xx_wdt.c -+ * Author: Deepak Saxena -+ * Copyright 2004 (c) MontaVista, Software, Inc. -+ * -+ * which again was based on sa1100 driver, -+ * Copyright (C) 2000 Oleg Drokin -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ ++ for (i = 0; i < timeout; i++) { ++ u32 t; + -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include ++ t = __ar7240sw_reg_read(mii, reg); ++ if ((t & mask) == val) ++ return 0; + -+#include ++ msleep(1); ++ } + -+#define DRV_NAME "ar71xx-wdt" -+#define DRV_DESC "Atheros AR71xx hardware watchdog driver" -+#define DRV_VERSION "0.1.0" ++ return -ETIMEDOUT; ++} + -+#define WDT_TIMEOUT 15 /* seconds */ ++static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val, ++ unsigned timeout) ++{ ++ int ret; + -+static int nowayout = WATCHDOG_NOWAYOUT; ++ mutex_lock(®_mutex); ++ ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout); ++ mutex_unlock(®_mutex); ++ return ret; ++} + -+#ifdef CONFIG_WATCHDOG_NOWAYOUT -+module_param(nowayout, int, 0); -+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " -+ "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -+#endif ++u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, ++ unsigned reg_addr) ++{ ++ u32 t, val = 0xffff; ++ int err; + -+static unsigned long wdt_flags; ++ if (phy_addr >= AR7240_NUM_PHYS) ++ return 0xffff; + -+#define WDT_FLAGS_BUSY 0 -+#define WDT_FLAGS_EXPECT_CLOSE 1 ++ mutex_lock(®_mutex); ++ t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | ++ (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | ++ AR7240_MDIO_CTRL_MASTER_EN | ++ AR7240_MDIO_CTRL_BUSY | ++ AR7240_MDIO_CTRL_CMD_READ; + -+static int wdt_timeout = WDT_TIMEOUT; -+static int boot_status; -+static int max_timeout; ++ __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); ++ err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, ++ AR7240_MDIO_CTRL_BUSY, 0, 5); ++ if (!err) ++ val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL); ++ mutex_unlock(®_mutex); + -+static void inline ar71xx_wdt_keepalive(void) -+{ -+ ar71xx_reset_wr(AR71XX_RESET_REG_WDOG, ar71xx_ahb_freq * wdt_timeout); ++ return val & AR7240_MDIO_CTRL_DATA_M; +} + -+static void inline ar71xx_wdt_enable(void) ++int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, ++ unsigned reg_addr, u16 reg_val) +{ -+ printk(KERN_DEBUG DRV_NAME ": enabling watchdog timer\n"); -+ ar71xx_wdt_keepalive(); -+ ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_FCR); -+} ++ u32 t; ++ int ret; + -+static void inline ar71xx_wdt_disable(void) -+{ -+ printk(KERN_DEBUG DRV_NAME ": disabling watchdog timer\n"); -+ ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_NONE); -+} -+ -+static int ar71xx_wdt_set_timeout(int val) -+{ -+ if (val < 1 || val > max_timeout) ++ if (phy_addr >= AR7240_NUM_PHYS) + return -EINVAL; + -+ wdt_timeout = val; -+ ar71xx_wdt_keepalive(); ++ mutex_lock(®_mutex); ++ t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | ++ (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | ++ AR7240_MDIO_CTRL_MASTER_EN | ++ AR7240_MDIO_CTRL_BUSY | ++ AR7240_MDIO_CTRL_CMD_WRITE | ++ reg_val; + -+ printk(KERN_DEBUG DRV_NAME ": timeout=%d secs\n", wdt_timeout); ++ __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t); ++ ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL, ++ AR7240_MDIO_CTRL_BUSY, 0, 5); ++ mutex_unlock(®_mutex); + -+ return 0; ++ return ret; +} + -+static int ar71xx_wdt_open(struct inode *inode, struct file *file) ++static int ar7240sw_capture_stats(struct ar7240sw *as) +{ -+ if (test_and_set_bit(WDT_FLAGS_BUSY, &wdt_flags)) -+ return -EBUSY; -+ -+ clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); ++ struct mii_bus *mii = as->mii_bus; ++ int ret; + -+ ar71xx_wdt_enable(); ++ /* Capture the hardware statistics for all ports */ ++ ar7240sw_reg_write(mii, AR7240_REG_MIB_FUNCTION0, ++ (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S)); + -+ return nonseekable_open(inode, file); ++ /* Wait for the capturing to complete. */ ++ ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0, ++ AR7240_MIB_BUSY, 0, 10); ++ return ret; +} + -+static int ar71xx_wdt_release(struct inode *inode, struct file *file) ++static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port) +{ -+ if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags)) { -+ ar71xx_wdt_disable(); -+ } else { -+ printk(KERN_CRIT DRV_NAME ": device closed unexpectedly, " -+ "watchdog timer will not stop!\n"); -+ } -+ -+ clear_bit(WDT_FLAGS_BUSY, &wdt_flags); -+ clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); -+ -+ return 0; ++ ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port), ++ AR7240_PORT_CTRL_STATE_DISABLED); +} + -+static ssize_t ar71xx_wdt_write(struct file *file, const char *data, -+ size_t len, loff_t *ppos) ++static void ar7240sw_setup(struct ar7240sw *as) +{ -+ if (len) { -+ if (!nowayout) { -+ size_t i; ++ struct mii_bus *mii = as->mii_bus; + -+ clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); ++ /* Enable CPU port, and disable mirror port */ ++ ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT, ++ AR7240_CPU_PORT_EN | ++ (15 << AR7240_MIRROR_PORT_S)); + -+ for (i = 0; i != len; i++) { -+ char c; ++ /* Setup TAG priority mapping */ ++ ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50); + -+ if (get_user(c, data + i)) -+ return -EFAULT; ++ /* Enable ARP frame acknowledge, aging, MAC replacing */ ++ ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL, ++ 0x2b /* 5 min age time */ | ++ AR7240_AT_CTRL_AGE_EN | ++ AR7240_AT_CTRL_ARP_EN | ++ AR7240_AT_CTRL_LEARN_CHANGE); + -+ if (c == 'V') -+ set_bit(WDT_FLAGS_EXPECT_CLOSE, -+ &wdt_flags); -+ } -+ } ++ /* Enable Broadcast frames transmitted to the CPU */ ++ ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK, ++ AR7240_FLOOD_MASK_BROAD_TO_CPU); + -+ ar71xx_wdt_keepalive(); -+ } ++ /* setup MTU */ ++ ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL, AR7240_GLOBAL_CTRL_MTU_M, ++ 1536); + -+ return len; ++ /* setup Service TAG */ ++ ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0); +} + -+static struct watchdog_info ar71xx_wdt_info = { -+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | -+ WDIOF_MAGICCLOSE | WDIOF_CARDRESET, -+ .firmware_version = 0, -+ .identity = "AR71XX watchdog", -+}; -+ -+static int ar71xx_wdt_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) ++static int ar7240sw_reset(struct ar7240sw *as) +{ -+ int t; ++ struct mii_bus *mii = as->mii_bus; + int ret; ++ int i; + -+ switch (cmd) { -+ case WDIOC_GETSUPPORT: -+ ret = copy_to_user((struct watchdog_info *)arg, -+ &ar71xx_wdt_info, -+ sizeof(&ar71xx_wdt_info)) ? -EFAULT : 0; -+ break; ++ /* Set all ports to disabled state. */ ++ for (i = 0; i < AR7240_NUM_PORTS; i++) ++ ar7240sw_disable_port(as, i); + -+ case WDIOC_GETSTATUS: -+ ret = put_user(0, (int *)arg) ? -EFAULT : 0; -+ break; ++ /* Wait for transmit queues to drain. */ ++ msleep(2); + -+ case WDIOC_GETBOOTSTATUS: -+ ret = put_user(boot_status, (int *)arg) ? -EFAULT : 0; -+ break; ++ /* Reset the switch. */ ++ ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL, ++ AR7240_MASK_CTRL_SOFT_RESET); + -+ case WDIOC_KEEPALIVE: -+ ar71xx_wdt_keepalive(); -+ ret = 0; -+ break; ++ ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL, ++ AR7240_MASK_CTRL_SOFT_RESET, 0, 1000); + -+ case WDIOC_SETTIMEOUT: -+ ret = get_user(t, (int *)arg) ? -EFAULT : 0; -+ if (ret) -+ break; ++ ar7240sw_setup(as); ++ return ret; ++} + -+ ret = ar71xx_wdt_set_timeout(t); -+ if (ret) -+ break; ++static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask) ++{ ++ struct mii_bus *mii = as->mii_bus; ++ u32 ctrl; ++ u32 dest_ports; ++ u32 vlan; + -+ /* fallthrough */ -+ case WDIOC_GETTIMEOUT: -+ ret = put_user(wdt_timeout, (int *)arg) ? -EFAULT : 0; -+ break; ++ ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN | ++ AR7240_PORT_CTRL_SINGLE_VLAN; + -+ default: -+ ret = -ENOTTY; -+ break; ++ if (port == AR7240_PORT_CPU) { ++ ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), ++ AR7240_PORT_STATUS_SPEED_1000 | ++ AR7240_PORT_STATUS_TXFLOW | ++ AR7240_PORT_STATUS_RXFLOW | ++ AR7240_PORT_STATUS_TXMAC | ++ AR7240_PORT_STATUS_RXMAC | ++ AR7240_PORT_STATUS_DUPLEX); ++ } else { ++ ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port), ++ AR7240_PORT_STATUS_LINK_AUTO); + } + -+ return ret; -+} ++ /* Set the default VID for this port */ ++ if (as->vlan) { ++ vlan = as->vlan_id[as->pvid[port]]; ++ vlan |= AR7240_PORT_VLAN_MODE_SECURE << ++ AR7240_PORT_VLAN_MODE_S; ++ } else { ++ vlan = port; ++ vlan |= AR7240_PORT_VLAN_MODE_PORT_ONLY << ++ AR7240_PORT_VLAN_MODE_S; ++ } + -+static const struct file_operations ar71xx_wdt_fops = { -+ .owner = THIS_MODULE, -+ .write = ar71xx_wdt_write, -+ .ioctl = ar71xx_wdt_ioctl, -+ .open = ar71xx_wdt_open, -+ .release = ar71xx_wdt_release, -+}; ++ if (as->vlan && (as->vlan_tagged & BIT(port))) { ++ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD << ++ AR7240_PORT_CTRL_VLAN_MODE_S; ++ } else { ++ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP << ++ AR7240_PORT_CTRL_VLAN_MODE_S; ++ } + -+static struct miscdevice ar71xx_wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &ar71xx_wdt_fops, -+}; ++ if (!portmask) { ++ if (port == AR7240_PORT_CPU) ++ portmask = AR7240_PORT_MASK_BUT(AR7240_PORT_CPU); ++ else ++ portmask = AR7240_PORT_MASK(AR7240_PORT_CPU); ++ } + -+static int __devinit ar71xx_wdt_probe(struct platform_device *pdev) -+{ -+ int ret; ++ /* allow the port to talk to all other ports, but exclude its ++ * own ID to prevent frames from being reflected back to the ++ * port that they came from */ ++ dest_ports = AR7240_PORT_MASK_BUT(port); + -+ max_timeout = (0xfffffffful / ar71xx_ahb_freq); -+ wdt_timeout = (max_timeout < WDT_TIMEOUT) ? max_timeout : WDT_TIMEOUT; ++ /* set default VID and and destination ports for this VLAN */ ++ vlan |= (portmask << AR7240_PORT_VLAN_DEST_PORTS_S); + -+ boot_status = -+ (ar71xx_reset_rr(AR71XX_RESET_REG_WDOG_CTRL) & WDOG_CTRL_LAST_RESET) ? -+ WDIOF_CARDRESET : 0; ++ ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl); ++ ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan); ++} + -+ ret = misc_register(&ar71xx_wdt_miscdev); -+ if (ret) -+ goto err_out; ++static int ar7240_set_addr(struct ar7240sw *as, u8 *addr) ++{ ++ struct mii_bus *mii = as->mii_bus; ++ u32 t; + -+ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); ++ t = (addr[4] << 8) | addr[5]; ++ ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t); + -+ printk(KERN_DEBUG DRV_NAME ": timeout=%d secs (max=%d)\n", -+ wdt_timeout, max_timeout); ++ t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; ++ ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t); + + return 0; -+ -+err_out: -+ return ret; +} + -+static int __devexit ar71xx_wdt_remove(struct platform_device *pdev) ++static int ++ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) +{ -+ misc_deregister(&ar71xx_wdt_miscdev); ++ struct ar7240sw *as = sw_to_ar7240(dev); ++ as->vlan_id[val->port_vlan] = val->value.i; + return 0; +} + -+static struct platform_driver ar71xx_wdt_driver = { -+ .probe = ar71xx_wdt_probe, -+ .remove = __devexit_p(ar71xx_wdt_remove), -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init ar71xx_wdt_init(void) ++static int ++ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) +{ -+ return platform_driver_register(&ar71xx_wdt_driver); ++ struct ar7240sw *as = sw_to_ar7240(dev); ++ val->value.i = as->vlan_id[val->port_vlan]; ++ return 0; +} -+module_init(ar71xx_wdt_init); + -+static void __exit ar71xx_wdt_exit(void) ++static int ++ar7240_set_pvid(struct switch_dev *dev, int port, int vlan) +{ -+ platform_driver_unregister(&ar71xx_wdt_driver); -+} -+module_exit(ar71xx_wdt_exit); ++ struct ar7240sw *as = sw_to_ar7240(dev); + -+MODULE_DESCRIPTION(DRV_DESC); -+MODULE_VERSION(DRV_VERSION); -+MODULE_AUTHOR("Gabor Juhos -- * Copyright (c) 2009 Imre Kaloz -+ * ath9k platform data defines - * -- * Permission to use, copy, modify, and/or distribute this software for any -- * purpose with or without fee is hereby granted, provided that the above -- * copyright notice and this permission notice appear in all copies. -+ * Copyright (C) 2008 Gabor Juhos - * -- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. - */ - - #ifndef _LINUX_ATH9K_PLATFORM_H -@@ -23,6 +15,9 @@ - - struct ath9k_platform_data { - u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; -+ u8 *macaddr; ++ /* make sure no invalid PVIDs get set */ + -+ unsigned long quirk_wndr3700:1; - }; - - #endif /* _LINUX_ATH9K_PLATFORM_H */ -diff -Nur linux-2.6.39.orig/include/linux/gpio_buttons.h linux-2.6.39/include/linux/gpio_buttons.h ---- linux-2.6.39.orig/include/linux/gpio_buttons.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/include/linux/gpio_buttons.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,33 @@ -+/* -+ * Definitions for the GPIO buttons interface driver -+ * -+ * Copyright (C) 2007-2010 Gabor Juhos -+ * -+ * This file was based on: /include/linux/gpio_keys.h -+ * The original gpio_keys.h seems not to have a license. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ ++ if (vlan >= dev->vlans) ++ return -EINVAL; + -+#ifndef _GPIO_BUTTONS_H_ -+#define _GPIO_BUTTONS_H_ ++ as->pvid[port] = vlan; ++ return 0; ++} + -+struct gpio_button { -+ int gpio; /* GPIO line number */ -+ int active_low; -+ char *desc; /* button description */ -+ int type; /* input event type (EV_KEY, EV_SW) */ -+ int code; /* input event code (KEY_*, SW_*) */ -+ int threshold; /* count threshold */ -+}; ++static int ++ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan) ++{ ++ struct ar7240sw *as = sw_to_ar7240(dev); ++ *vlan = as->pvid[port]; ++ return 0; ++} + -+struct gpio_buttons_platform_data { -+ struct gpio_button *buttons; -+ int nbuttons; /* number of buttons */ -+ int poll_interval; /* polling interval */ -+}; ++static int ++ar7240_get_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ struct ar7240sw *as = sw_to_ar7240(dev); ++ u8 ports = as->vlan_table[val->port_vlan]; ++ int i; + -+#endif /* _GPIO_BUTTONS_H_ */ -diff -Nur linux-2.6.39.orig/include/linux/gpio_dev.h linux-2.6.39/include/linux/gpio_dev.h ---- linux-2.6.39.orig/include/linux/gpio_dev.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/include/linux/gpio_dev.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,11 @@ -+#ifndef _GPIODEV_H__ -+#define _GPIODEV_H__ ++ val->len = 0; ++ for (i = 0; i < AR7240_NUM_PORTS; i++) { ++ struct switch_port *p; + -+#define IOC_GPIODEV_MAGIC 'B' -+#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10) -+#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11) -+#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12) -+#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13) -+#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14) ++ if (!(ports & (1 << i))) ++ continue; + -+#endif -diff -Nur linux-2.6.39.orig/include/linux/netdevice.h linux-2.6.39/include/linux/netdevice.h ---- linux-2.6.39.orig/include/linux/netdevice.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/netdevice.h 2011-05-27 14:36:51.000000000 +0200 -@@ -1182,6 +1182,7 @@ - void *ax25_ptr; /* AX.25 specific data */ - struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data, - assign before registering */ -+ void *phy_ptr; /* PHY device specific data */ - - /* - * Cache lines mostly used on receive path (including eth_type_trans()) -diff -Nur linux-2.6.39.orig/include/linux/nxp_74hc153.h linux-2.6.39/include/linux/nxp_74hc153.h ---- linux-2.6.39.orig/include/linux/nxp_74hc153.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/include/linux/nxp_74hc153.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,24 @@ -+/* -+ * NXP 74HC153 - Dual 4-input multiplexer defines -+ * -+ * Copyright (C) 2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ ++ p = &val->value.ports[val->len++]; ++ p->id = i; ++ if (as->vlan_tagged & (1 << i)) ++ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); ++ else ++ p->flags = 0; ++ } ++ return 0; ++} + -+#ifndef _NXP_74HC153_H -+#define _NXP_74HC153_H ++static int ++ar7240_set_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ struct ar7240sw *as = sw_to_ar7240(dev); ++ u8 *vt = &as->vlan_table[val->port_vlan]; ++ int i, j; ++ ++ *vt = 0; ++ for (i = 0; i < val->len; i++) { ++ struct switch_port *p = &val->value.ports[i]; ++ ++ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) ++ as->vlan_tagged |= (1 << p->id); ++ else { ++ as->vlan_tagged &= ~(1 << p->id); ++ as->pvid[p->id] = val->port_vlan; ++ ++ /* make sure that an untagged port does not ++ * appear in other vlans */ ++ for (j = 0; j < AR7240_MAX_VLANS; j++) { ++ if (j == val->port_vlan) ++ continue; ++ as->vlan_table[j] &= ~(1 << p->id); ++ } ++ } + -+#define NXP_74HC153_DRIVER_NAME "nxp-74hc153" ++ *vt |= 1 << p->id; ++ } ++ return 0; ++} + -+struct nxp_74hc153_platform_data { -+ unsigned gpio_base; -+ unsigned gpio_pin_s0; -+ unsigned gpio_pin_s1; -+ unsigned gpio_pin_1y; -+ unsigned gpio_pin_2y; -+}; ++static int ++ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct ar7240sw *as = sw_to_ar7240(dev); ++ as->vlan = !!val->value.i; ++ return 0; ++} + -+#endif /* _NXP_74HC153_H */ -diff -Nur linux-2.6.39.orig/include/linux/phy.h linux-2.6.39/include/linux/phy.h ---- linux-2.6.39.orig/include/linux/phy.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/phy.h 2011-05-27 14:36:51.000000000 +0200 -@@ -332,6 +332,20 @@ - void (*adjust_link)(struct net_device *dev); - - void (*adjust_state)(struct net_device *dev); ++static int ++ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct ar7240sw *as = sw_to_ar7240(dev); ++ val->value.i = as->vlan; ++ return 0; ++} + -+ /* -+ * By default these point to the original functions -+ * with the same name. adding them to the phy_device -+ * allows the phy driver to override them for packet -+ * mangling if the ethernet driver supports it -+ * This is required to support some really horrible -+ * switches such as the Marvell 88E6060 -+ */ -+ int (*netif_receive_skb)(struct sk_buff *skb); -+ int (*netif_rx)(struct sk_buff *skb); + -+ /* alignment offset for packets */ -+ int pkt_align; - }; - #define to_phy_device(d) container_of(d, struct phy_device, dev) - -@@ -508,6 +522,7 @@ - void phy_stop_machine(struct phy_device *phydev); - int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); - int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); -+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr); - int phy_mii_ioctl(struct phy_device *phydev, - struct ifreq *ifr, int cmd); - int phy_start_interrupts(struct phy_device *phydev); -diff -Nur linux-2.6.39.orig/include/linux/spi/vsc7385.h linux-2.6.39/include/linux/spi/vsc7385.h ---- linux-2.6.39.orig/include/linux/spi/vsc7385.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/include/linux/spi/vsc7385.h 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,19 @@ -+/* -+ * Platform data definition for the Vitesse VSC7385 ethernet switch driver -+ * -+ * Copyright (C) 2009 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ ++static void ++ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val) ++{ ++ struct mii_bus *mii = as->mii_bus; + -+struct vsc7385_platform_data { -+ void (* reset)(void); -+ char *ucode_name; -+ struct { -+ u32 tx_ipg:5; -+ u32 bit2:1; -+ u32 clk_sel:3; -+ } mac_cfg; ++ if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5)) ++ return; ++ ++ if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) { ++ val &= AR7240_VTUDATA_MEMBER; ++ val |= AR7240_VTUDATA_VALID; ++ ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val); ++ } ++ op |= AR7240_VTU_ACTIVE; ++ ar7240sw_reg_write(mii, AR7240_REG_VTU, op); ++} ++ ++static int ++ar7240_hw_apply(struct switch_dev *dev) ++{ ++ struct ar7240sw *as = sw_to_ar7240(dev); ++ u8 portmask[AR7240_NUM_PORTS]; ++ int i, j; ++ ++ /* flush all vlan translation unit entries */ ++ ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0); ++ ++ memset(portmask, 0, sizeof(portmask)); ++ if (as->vlan) { ++ /* calculate the port destination masks and load vlans ++ * into the vlan translation unit */ ++ for (j = 0; j < AR7240_MAX_VLANS; j++) { ++ u8 vp = as->vlan_table[j]; ++ ++ if (!vp) ++ continue; ++ ++ for (i = 0; i < AR7240_NUM_PORTS; i++) { ++ u8 mask = (1 << i); ++ if (vp & mask) ++ portmask[i] |= vp & ~mask; ++ } ++ ++ ar7240_vtu_op(as, ++ AR7240_VTU_OP_LOAD | ++ (as->vlan_id[j] << AR7240_VTU_VID_S), ++ as->vlan_table[j]); ++ } ++ } else { ++ /* vlan disabled: ++ * isolate all ports, but connect them to the cpu port */ ++ for (i = 0; i < AR7240_NUM_PORTS; i++) { ++ if (i == AR7240_PORT_CPU) ++ continue; ++ ++ portmask[i] = 1 << AR7240_PORT_CPU; ++ portmask[AR7240_PORT_CPU] |= (1 << i); ++ } ++ } ++ ++ /* update the port destination mask registers and tag settings */ ++ for (i = 0; i < AR7240_NUM_PORTS; i++) ++ ar7240sw_setup_port(as, i, portmask[i]); ++ ++ return 0; ++} ++ ++static int ++ar7240_reset_switch(struct switch_dev *dev) ++{ ++ struct ar7240sw *as = sw_to_ar7240(dev); ++ ar7240sw_reset(as); ++ return 0; ++} ++ ++static struct switch_attr ar7240_globals[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "enable_vlan", ++ .description = "Enable VLAN mode", ++ .set = ar7240_set_vlan, ++ .get = ar7240_get_vlan, ++ .max = 1 ++ }, +}; -diff -Nur linux-2.6.39.orig/net/dsa/ar7240.c linux-2.6.39/net/dsa/ar7240.c ---- linux-2.6.39.orig/net/dsa/ar7240.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/net/dsa/ar7240.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,736 @@ -+/* -+ * DSA driver for the built-in ethernet switch of the Atheros AR7240 SoC -+ * Copyright (c) 2010 Gabor Juhos -+ * -+ * This file was based on: -+ * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips -+ * Copyright (c) 2008 Marvell Semiconductor -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ + -+#include -+#include -+#include -+#include -+#include -+#include ++static struct switch_attr ar7240_port[] = { ++}; + -+#include "dsa_priv.h" ++static struct switch_attr ar7240_vlan[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "vid", ++ .description = "VLAN ID", ++ .set = ar7240_set_vid, ++ .get = ar7240_get_vid, ++ .max = 4094, ++ }, ++}; + -+#define BITM(_count) (BIT(_count) - 1) ++static const struct switch_dev_ops ar7240_ops = { ++ .attr_global = { ++ .attr = ar7240_globals, ++ .n_attr = ARRAY_SIZE(ar7240_globals), ++ }, ++ .attr_port = { ++ .attr = ar7240_port, ++ .n_attr = ARRAY_SIZE(ar7240_port), ++ }, ++ .attr_vlan = { ++ .attr = ar7240_vlan, ++ .n_attr = ARRAY_SIZE(ar7240_vlan), ++ }, ++ .get_port_pvid = ar7240_get_pvid, ++ .set_port_pvid = ar7240_set_pvid, ++ .get_vlan_ports = ar7240_get_ports, ++ .set_vlan_ports = ar7240_set_ports, ++ .apply_config = ar7240_hw_apply, ++ .reset_switch = ar7240_reset_switch, ++}; + -+#define AR7240_REG_MASK_CTRL 0x00 -+#define AR7240_MASK_CTRL_REVISION_M BITM(8) -+#define AR7240_MASK_CTRL_VERSION_M BITM(8) -+#define AR7240_MASK_CTRL_VERSION_S 8 -+#define AR7240_MASK_CTRL_SOFT_RESET BIT(31) ++static struct ar7240sw *ar7240_probe(struct ag71xx *ag) ++{ ++ struct mii_bus *mii = ag->mii_bus; ++ struct ar7240sw *as; ++ struct switch_dev *swdev; ++ u32 ctrl; ++ u16 phy_id1; ++ u16 phy_id2; ++ u8 ver; ++ int i; + -+#define AR7240_REG_MAC_ADDR0 0x20 -+#define AR7240_REG_MAC_ADDR1 0x24 ++ as = kzalloc(sizeof(*as), GFP_KERNEL); ++ if (!as) ++ return NULL; + -+#define AR7240_REG_FLOOD_MASK 0x2c -+#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26) ++ ar7240sw_init(as, mii); + -+#define AR7240_REG_GLOBAL_CTRL 0x30 -+#define AR7240_GLOBAL_CTRL_MTU_M BITM(12) ++ ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL); + -+#define AR7240_REG_AT_CTRL 0x5c -+#define AR7240_AT_CTRL_ARP_EN BIT(20) ++ ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) & AR7240_MASK_CTRL_VERSION_M; ++ if (ver != 1) { ++ pr_err("%s: unsupported chip, ctrl=%08x\n", ++ ag->dev->name, ctrl); ++ return NULL; ++ } + -+#define AR7240_REG_TAG_PRIORITY 0x70 ++ phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1); ++ phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2); ++ if (phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) { ++ pr_err("%s: unknown phy id '%04x:%04x'\n", ++ ag->dev->name, phy_id1, phy_id2); ++ return NULL; ++ } + -+#define AR7240_REG_SERVICE_TAG 0x74 -+#define AR7240_SERVICE_TAG_M BITM(16) ++ swdev = &as->swdev; ++ swdev->name = "AR7240 built-in switch"; ++ swdev->ports = AR7240_NUM_PORTS; ++ swdev->cpu_port = AR7240_PORT_CPU; ++ swdev->vlans = AR7240_MAX_VLANS; ++ swdev->ops = &ar7240_ops; + -+#define AR7240_REG_CPU_PORT 0x78 -+#define AR7240_MIRROR_PORT_S 4 -+#define AR7240_CPU_PORT_EN BIT(8) ++ if (register_switch(&as->swdev, ag->dev) < 0) { ++ kfree(as); ++ return NULL; ++ } + -+#define AR7240_REG_MIB_FUNCTION0 0x80 -+#define AR7240_MIB_TIMER_M BITM(16) -+#define AR7240_MIB_AT_HALF_EN BIT(16) -+#define AR7240_MIB_BUSY BIT(17) -+#define AR7240_MIB_FUNC_S 24 -+#define AR7240_MIB_FUNC_NO_OP 0x0 -+#define AR7240_MIB_FUNC_FLUSH 0x1 -+#define AR7240_MIB_FUNC_CAPTURE 0x3 ++ pr_info("%s: Found an AR7240 built-in switch\n", ag->dev->name); + -+#define AR7240_REG_MDIO_CTRL 0x98 -+#define AR7240_MDIO_CTRL_DATA_M BITM(16) -+#define AR7240_MDIO_CTRL_REG_ADDR_S 16 -+#define AR7240_MDIO_CTRL_PHY_ADDR_S 21 -+#define AR7240_MDIO_CTRL_CMD_WRITE 0 -+#define AR7240_MDIO_CTRL_CMD_READ BIT(27) -+#define AR7240_MDIO_CTRL_MASTER_EN BIT(30) -+#define AR7240_MDIO_CTRL_BUSY BIT(31) ++ /* initialize defaults */ ++ for (i = 0; i < AR7240_MAX_VLANS; i++) ++ as->vlan_id[i] = i; + -+#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100) ++ as->vlan_table[0] = AR7240_PORT_MASK_ALL; + -+#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00) -+#define AR7240_PORT_STATUS_SPEED_M BITM(2) -+#define AR7240_PORT_STATUS_SPEED_10 0 -+#define AR7240_PORT_STATUS_SPEED_100 1 -+#define AR7240_PORT_STATUS_SPEED_1000 2 -+#define AR7240_PORT_STATUS_TXMAC BIT(2) -+#define AR7240_PORT_STATUS_RXMAC BIT(3) -+#define AR7240_PORT_STATUS_TXFLOW BIT(4) -+#define AR7240_PORT_STATUS_RXFLOW BIT(5) -+#define AR7240_PORT_STATUS_DUPLEX BIT(6) -+#define AR7240_PORT_STATUS_LINK_UP BIT(8) -+#define AR7240_PORT_STATUS_LINK_AUTO BIT(9) -+#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10) ++ return as; ++} + -+#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04) -+#define AR7240_PORT_CTRL_STATE_M BITM(3) -+#define AR7240_PORT_CTRL_STATE_DISABLED 0 -+#define AR7240_PORT_CTRL_STATE_BLOCK 1 -+#define AR7240_PORT_CTRL_STATE_LISTEN 2 -+#define AR7240_PORT_CTRL_STATE_LEARN 3 -+#define AR7240_PORT_CTRL_STATE_FORWARD 4 -+#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7) -+#define AR7240_PORT_CTRL_VLAN_MODE_S 8 -+#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0 -+#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1 -+#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2 -+#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3 -+#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10) -+#define AR7240_PORT_CTRL_HEADER BIT(11) -+#define AR7240_PORT_CTRL_MAC_LOOP BIT(12) -+#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13) -+#define AR7240_PORT_CTRL_LEARN BIT(14) -+#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15) -+#define AR7240_PORT_CTRL_MIRROR_TX BIT(16) -+#define AR7240_PORT_CTRL_MIRROR_RX BIT(17) ++static void link_function(struct work_struct *work) { ++ struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work); ++ unsigned long flags; ++ int i; ++ int status = 0; + -+#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08) ++ for (i = 0; i < 4; i++) { ++ int link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR); ++ if(link & BMSR_LSTATUS) { ++ status = 1; ++ break; ++ } ++ } + -+#define AR7240_PORT_VLAN_DEFAULT_ID_S 0 -+#define AR7240_PORT_VLAN_DEST_PORTS_S 16 ++ spin_lock_irqsave(&ag->lock, flags); ++ if(status != ag->link) { ++ ag->link = status; ++ ag71xx_link_adjust(ag); ++ } ++ spin_unlock_irqrestore(&ag->lock, flags); + -+#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100) ++ schedule_delayed_work(&ag->link_work, HZ / 2); ++} + -+#define AR7240_STATS_RXBROAD 0x00 -+#define AR7240_STATS_RXPAUSE 0x04 -+#define AR7240_STATS_RXMULTI 0x08 -+#define AR7240_STATS_RXFCSERR 0x0c -+#define AR7240_STATS_RXALIGNERR 0x10 -+#define AR7240_STATS_RXRUNT 0x14 -+#define AR7240_STATS_RXFRAGMENT 0x18 -+#define AR7240_STATS_RX64BYTE 0x1c -+#define AR7240_STATS_RX128BYTE 0x20 -+#define AR7240_STATS_RX256BYTE 0x24 -+#define AR7240_STATS_RX512BYTE 0x28 -+#define AR7240_STATS_RX1024BYTE 0x2c -+#define AR7240_STATS_RX1518BYTE 0x30 -+#define AR7240_STATS_RXMAXBYTE 0x34 -+#define AR7240_STATS_RXTOOLONG 0x38 -+#define AR7240_STATS_RXGOODBYTE 0x3c -+#define AR7240_STATS_RXBADBYTE 0x44 -+#define AR7240_STATS_RXOVERFLOW 0x4c -+#define AR7240_STATS_FILTERED 0x50 -+#define AR7240_STATS_TXBROAD 0x54 -+#define AR7240_STATS_TXPAUSE 0x58 -+#define AR7240_STATS_TXMULTI 0x5c -+#define AR7240_STATS_TXUNDERRUN 0x60 -+#define AR7240_STATS_TX64BYTE 0x64 -+#define AR7240_STATS_TX128BYTE 0x68 -+#define AR7240_STATS_TX256BYTE 0x6c -+#define AR7240_STATS_TX512BYTE 0x70 -+#define AR7240_STATS_TX1024BYTE 0x74 -+#define AR7240_STATS_TX1518BYTE 0x78 -+#define AR7240_STATS_TXMAXBYTE 0x7c -+#define AR7240_STATS_TXOVERSIZE 0x80 -+#define AR7240_STATS_TXBYTE 0x84 -+#define AR7240_STATS_TXCOLLISION 0x8c -+#define AR7240_STATS_TXABORTCOL 0x90 -+#define AR7240_STATS_TXMULTICOL 0x94 -+#define AR7240_STATS_TXSINGLECOL 0x98 -+#define AR7240_STATS_TXEXCDEFER 0x9c -+#define AR7240_STATS_TXDEFER 0xa0 -+#define AR7240_STATS_TXLATECOL 0xa4 ++void ag71xx_ar7240_start(struct ag71xx *ag) ++{ ++ struct ar7240sw *as = ag->phy_priv; ++ ++ ar7240sw_reset(as); ++ ++ ag->speed = SPEED_1000; ++ ag->duplex = 1; ++ ++ ar7240_set_addr(as, ag->dev->dev_addr); ++ ar7240_hw_apply(&as->swdev); ++ ++ schedule_delayed_work(&ag->link_work, HZ / 10); ++} ++ ++void ag71xx_ar7240_stop(struct ag71xx *ag) ++{ ++ cancel_delayed_work_sync(&ag->link_work); ++} ++ ++int __devinit ag71xx_ar7240_init(struct ag71xx *ag) ++{ ++ struct ar7240sw *as; ++ ++ as = ar7240_probe(ag); ++ if (!as) ++ return -ENODEV; ++ ++ ag->phy_priv = as; ++ ar7240sw_reset(as); ++ ++ INIT_DELAYED_WORK(&ag->link_work, link_function); ++ ++ return 0; ++} ++ ++void ag71xx_ar7240_cleanup(struct ag71xx *ag) ++{ ++ struct ar7240sw *as = ag->phy_priv; ++ ++ if (!as) ++ return; ++ ++ unregister_switch(&as->swdev); ++ kfree(as); ++ ag->phy_priv = NULL; ++} +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar8216.c linux-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c +--- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar8216.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c 2011-04-27 12:19:22.257663952 +0200 +@@ -0,0 +1,44 @@ ++/* ++ * Atheros AR71xx built-in ethernet mac driver ++ * Special support for the Atheros ar8216 switch chip ++ * ++ * Copyright (C) 2009-2010 Gabor Juhos ++ * ++ * Based on Atheros' AG7100 driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include "ag71xx.h" ++ ++#define AR8216_PACKET_TYPE_MASK 0xf ++#define AR8216_PACKET_TYPE_NORMAL 0 ++ ++#define AR8216_HEADER_LEN 2 ++ ++void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb) ++{ ++ skb_push(skb, AR8216_HEADER_LEN); ++ skb->data[0] = 0x10; ++ skb->data[1] = 0x80; ++} ++ ++int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, ++ int pktlen) ++{ ++ u8 type; ++ ++ type = skb->data[1] & AR8216_PACKET_TYPE_MASK; ++ switch (type) { ++ case AR8216_PACKET_TYPE_NORMAL: ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ skb_pull(skb, AR8216_HEADER_LEN); ++ return 0; ++} +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_debugfs.c linux-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c +--- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_debugfs.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c 2011-08-06 09:32:37.298018216 +0200 +@@ -0,0 +1,280 @@ ++/* ++ * Atheros AR71xx built-in ethernet mac driver ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Based on Atheros' AG7100 driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++ ++#include "ag71xx.h" ++ ++static struct dentry *ag71xx_debugfs_root; ++ ++static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file) ++{ ++ file->private_data = inode->i_private; ++ return 0; ++} ++ ++void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status) ++{ ++ if (status) ++ ag->debug.int_stats.total++; ++ if (status & AG71XX_INT_TX_PS) ++ ag->debug.int_stats.tx_ps++; ++ if (status & AG71XX_INT_TX_UR) ++ ag->debug.int_stats.tx_ur++; ++ if (status & AG71XX_INT_TX_BE) ++ ag->debug.int_stats.tx_be++; ++ if (status & AG71XX_INT_RX_PR) ++ ag->debug.int_stats.rx_pr++; ++ if (status & AG71XX_INT_RX_OF) ++ ag->debug.int_stats.rx_of++; ++ if (status & AG71XX_INT_RX_BE) ++ ag->debug.int_stats.rx_be++; ++} ++ ++static ssize_t read_file_int_stats(struct file *file, char __user *user_buf, ++ size_t count, loff_t *ppos) ++{ ++#define PR_INT_STAT(_label, _field) \ ++ len += snprintf(buf + len, sizeof(buf) - len, \ ++ "%20s: %10lu\n", _label, ag->debug.int_stats._field); ++ ++ struct ag71xx *ag = file->private_data; ++ char buf[256]; ++ unsigned int len = 0; ++ ++ PR_INT_STAT("TX Packet Sent", tx_ps); ++ PR_INT_STAT("TX Underrun", tx_ur); ++ PR_INT_STAT("TX Bus Error", tx_be); ++ PR_INT_STAT("RX Packet Received", rx_pr); ++ PR_INT_STAT("RX Overflow", rx_of); ++ PR_INT_STAT("RX Bus Error", rx_be); ++ len += snprintf(buf + len, sizeof(buf) - len, "\n"); ++ PR_INT_STAT("Total", total); ++ ++ return simple_read_from_buffer(user_buf, count, ppos, buf, len); ++#undef PR_INT_STAT ++} ++ ++static const struct file_operations ag71xx_fops_int_stats = { ++ .open = ag71xx_debugfs_generic_open, ++ .read = read_file_int_stats, ++ .owner = THIS_MODULE ++}; ++ ++void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx) ++{ ++ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; ++ ++ if (rx) { ++ stats->rx_count++; ++ stats->rx_packets += rx; ++ if (rx <= AG71XX_NAPI_WEIGHT) ++ stats->rx[rx]++; ++ if (rx > stats->rx_packets_max) ++ stats->rx_packets_max = rx; ++ } ++ ++ if (tx) { ++ stats->tx_count++; ++ stats->tx_packets += tx; ++ if (tx <= AG71XX_NAPI_WEIGHT) ++ stats->tx[tx]++; ++ if (tx > stats->tx_packets_max) ++ stats->tx_packets_max = tx; ++ } ++} ++ ++static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf, ++ size_t count, loff_t *ppos) ++{ ++ struct ag71xx *ag = file->private_data; ++ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats; ++ char *buf; ++ unsigned int buflen; ++ unsigned int len = 0; ++ unsigned long rx_avg = 0; ++ unsigned long tx_avg = 0; ++ int ret; ++ int i; ++ ++ buflen = 2048; ++ buf = kmalloc(buflen, GFP_KERNEL); ++ if (!buf) ++ return -ENOMEM; ++ ++ if (stats->rx_count) ++ rx_avg = stats->rx_packets / stats->rx_count; ++ ++ if (stats->tx_count) ++ tx_avg = stats->tx_packets / stats->tx_count; ++ ++ len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n", ++ "len", "rx", "tx"); ++ ++ for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++) ++ len += snprintf(buf + len, buflen - len, ++ "%3d: %10lu %10lu\n", ++ i, stats->rx[i], stats->tx[i]); ++ ++ len += snprintf(buf + len, buflen - len, "\n"); ++ ++ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", ++ "sum", stats->rx_count, stats->tx_count); ++ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", ++ "avg", rx_avg, tx_avg); ++ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", ++ "max", stats->rx_packets_max, stats->tx_packets_max); ++ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n", ++ "pkt", stats->rx_packets, stats->tx_packets); ++ ++ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); ++ kfree(buf); ++ ++ return ret; ++} ++ ++static const struct file_operations ag71xx_fops_napi_stats = { ++ .open = ag71xx_debugfs_generic_open, ++ .read = read_file_napi_stats, ++ .owner = THIS_MODULE ++}; ++ ++#define DESC_PRINT_LEN 64 ++ ++static ssize_t read_file_ring(struct file *file, char __user *user_buf, ++ size_t count, loff_t *ppos, ++ struct ag71xx *ag, ++ struct ag71xx_ring *ring, ++ unsigned desc_reg) ++{ ++ char *buf; ++ unsigned int buflen; ++ unsigned int len = 0; ++ unsigned long flags; ++ ssize_t ret; ++ int curr; ++ int dirty; ++ u32 desc_hw; ++ int i; ++ ++ buflen = (ring->size * DESC_PRINT_LEN); ++ buf = kmalloc(buflen, GFP_KERNEL); ++ if (!buf) ++ return -ENOMEM; ++ ++ len += snprintf(buf + len, buflen - len, ++ "Idx ... %-8s %-8s %-8s %-8s . %-10s\n", ++ "desc", "next", "data", "ctrl", "timestamp"); ++ ++ spin_lock_irqsave(&ag->lock, flags); ++ ++ curr = (ring->curr % ring->size); ++ dirty = (ring->dirty % ring->size); ++ desc_hw = ag71xx_rr(ag, desc_reg); ++ for (i = 0; i < ring->size; i++) { ++ struct ag71xx_buf *ab = &ring->buf[i]; ++ u32 desc_dma = ((u32) ring->descs_dma) + i * ring->desc_size; ++ ++ len += snprintf(buf + len, buflen - len, ++ "%3d %c%c%c %08x %08x %08x %08x %c %10lu\n", ++ i, ++ (i == curr) ? 'C' : ' ', ++ (i == dirty) ? 'D' : ' ', ++ (desc_hw == desc_dma) ? 'H' : ' ', ++ desc_dma, ++ ab->desc->next, ++ ab->desc->data, ++ ab->desc->ctrl, ++ (ab->desc->ctrl & DESC_EMPTY) ? 'E' : '*', ++ ab->timestamp); ++ } ++ ++ spin_unlock_irqrestore(&ag->lock, flags); ++ ++ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); ++ kfree(buf); ++ ++ return ret; ++} ++ ++static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf, ++ size_t count, loff_t *ppos) ++{ ++ struct ag71xx *ag = file->private_data; ++ ++ return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring, ++ AG71XX_REG_TX_DESC); ++} ++ ++static const struct file_operations ag71xx_fops_tx_ring = { ++ .open = ag71xx_debugfs_generic_open, ++ .read = read_file_tx_ring, ++ .owner = THIS_MODULE ++}; ++ ++static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf, ++ size_t count, loff_t *ppos) ++{ ++ struct ag71xx *ag = file->private_data; ++ ++ return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring, ++ AG71XX_REG_RX_DESC); ++} ++ ++static const struct file_operations ag71xx_fops_rx_ring = { ++ .open = ag71xx_debugfs_generic_open, ++ .read = read_file_rx_ring, ++ .owner = THIS_MODULE ++}; ++ ++void ag71xx_debugfs_exit(struct ag71xx *ag) ++{ ++ debugfs_remove_recursive(ag->debug.debugfs_dir); ++} ++ ++int ag71xx_debugfs_init(struct ag71xx *ag) ++{ ++ ag->debug.debugfs_dir = debugfs_create_dir(ag->dev->name, ++ ag71xx_debugfs_root); ++ if (!ag->debug.debugfs_dir) ++ return -ENOMEM; ++ ++ debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir, ++ ag, &ag71xx_fops_int_stats); ++ debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir, ++ ag, &ag71xx_fops_napi_stats); ++ debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir, ++ ag, &ag71xx_fops_tx_ring); ++ debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir, ++ ag, &ag71xx_fops_rx_ring); ++ ++ return 0; ++} ++ ++int ag71xx_debugfs_root_init(void) ++{ ++ if (ag71xx_debugfs_root) ++ return -EBUSY; ++ ++ ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); ++ if (!ag71xx_debugfs_root) ++ return -ENOENT; ++ ++ return 0; ++} ++ ++void ag71xx_debugfs_root_exit(void) ++{ ++ debugfs_remove(ag71xx_debugfs_root); ++ ag71xx_debugfs_root = NULL; ++} +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ethtool.c linux-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c +--- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ethtool.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c 2011-08-06 09:32:37.308017908 +0200 +@@ -0,0 +1,124 @@ ++/* ++ * Atheros AR71xx built-in ethernet mac driver ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Based on Atheros' AG7100 driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include "ag71xx.h" ++ ++static int ag71xx_ethtool_get_settings(struct net_device *dev, ++ struct ethtool_cmd *cmd) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ struct phy_device *phydev = ag->phy_dev; ++ ++ if (!phydev) ++ return -ENODEV; ++ ++ return phy_ethtool_gset(phydev, cmd); ++} ++ ++static int ag71xx_ethtool_set_settings(struct net_device *dev, ++ struct ethtool_cmd *cmd) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ struct phy_device *phydev = ag->phy_dev; ++ ++ if (!phydev) ++ return -ENODEV; ++ ++ return phy_ethtool_sset(phydev, cmd); ++} ++ ++static void ag71xx_ethtool_get_drvinfo(struct net_device *dev, ++ struct ethtool_drvinfo *info) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ ++ strcpy(info->driver, ag->pdev->dev.driver->name); ++ strcpy(info->version, AG71XX_DRV_VERSION); ++ strcpy(info->bus_info, dev_name(&ag->pdev->dev)); ++} ++ ++static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ ++ return ag->msg_enable; ++} ++ ++static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ ++ ag->msg_enable = msg_level; ++} ++ ++static void ag71xx_ethtool_get_ringparam(struct net_device *dev, ++ struct ethtool_ringparam *er) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ ++ er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX; ++ er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX; ++ er->rx_mini_max_pending = 0; ++ er->rx_jumbo_max_pending = 0; ++ ++ er->tx_pending = ag->tx_ring.size; ++ er->rx_pending = ag->rx_ring.size; ++ er->rx_mini_pending = 0; ++ er->rx_jumbo_pending = 0; ++} ++ ++static int ag71xx_ethtool_set_ringparam(struct net_device *dev, ++ struct ethtool_ringparam *er) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ unsigned tx_size; ++ unsigned rx_size; ++ int err; ++ ++ if (er->rx_mini_pending != 0|| ++ er->rx_jumbo_pending != 0 || ++ er->rx_pending == 0 || ++ er->tx_pending == 0) ++ return -EINVAL; ++ ++ tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ? ++ er->tx_pending : AG71XX_TX_RING_SIZE_MAX; ++ ++ rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ? ++ er->rx_pending : AG71XX_RX_RING_SIZE_MAX; ++ ++ if (netif_running(dev)) { ++ err = dev->netdev_ops->ndo_stop(dev); ++ if (err) ++ return err; ++ } ++ ++ ag->tx_ring.size = tx_size; ++ ag->rx_ring.size = rx_size; ++ ++ if (netif_running(dev)) ++ err = dev->netdev_ops->ndo_open(dev); ++ ++ return err; ++} ++ ++struct ethtool_ops ag71xx_ethtool_ops = { ++ .set_settings = ag71xx_ethtool_set_settings, ++ .get_settings = ag71xx_ethtool_get_settings, ++ .get_drvinfo = ag71xx_ethtool_get_drvinfo, ++ .get_msglevel = ag71xx_ethtool_get_msglevel, ++ .set_msglevel = ag71xx_ethtool_set_msglevel, ++ .get_ringparam = ag71xx_ethtool_get_ringparam, ++ .set_ringparam = ag71xx_ethtool_set_ringparam, ++ .get_link = ethtool_op_get_link, ++}; +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx.h linux-2.6.39/drivers/net/ag71xx/ag71xx.h +--- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx.h 2011-08-22 07:40:12.160480642 +0200 +@@ -0,0 +1,518 @@ ++/* ++ * Atheros AR71xx built-in ethernet mac driver ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Based on Atheros' AG7100 driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __AG71XX_H ++#define __AG71XX_H ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++ ++#define AG71XX_DRV_NAME "ag71xx" ++#define AG71XX_DRV_VERSION "0.5.35" ++ ++#define AG71XX_NAPI_WEIGHT 64 ++#define AG71XX_OOM_REFILL (1 + HZ/10) ++ ++#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE) ++#define AG71XX_INT_TX (AG71XX_INT_TX_PS) ++#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF) ++ ++#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX) ++#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL) ++ ++#define AG71XX_TX_MTU_LEN 1540 ++#define AG71XX_RX_PKT_RESERVE 64 ++#define AG71XX_RX_PKT_SIZE \ ++ (AG71XX_RX_PKT_RESERVE + ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN) ++ ++#define AG71XX_TX_RING_SIZE_DEFAULT 64 ++#define AG71XX_RX_RING_SIZE_DEFAULT 128 ++ ++#define AG71XX_TX_RING_SIZE_MAX 256 ++#define AG71XX_RX_RING_SIZE_MAX 256 ++ ++#ifdef CONFIG_AG71XX_DEBUG ++#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args) ++#else ++#define DBG(fmt, args...) do {} while (0) ++#endif ++ ++#define ag71xx_assert(_cond) \ ++do { \ ++ if (_cond) \ ++ break; \ ++ printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \ ++ BUG(); \ ++} while (0) ++ ++struct ag71xx_desc { ++ u32 data; ++ u32 ctrl; ++#define DESC_EMPTY BIT(31) ++#define DESC_MORE BIT(24) ++#define DESC_PKTLEN_M 0xfff ++ u32 next; ++ u32 pad; ++} __attribute__((aligned(4))); ++ ++struct ag71xx_buf { ++ struct sk_buff *skb; ++ struct ag71xx_desc *desc; ++ dma_addr_t dma_addr; ++ unsigned long timestamp; ++}; ++ ++struct ag71xx_ring { ++ struct ag71xx_buf *buf; ++ u8 *descs_cpu; ++ dma_addr_t descs_dma; ++ unsigned int desc_size; ++ unsigned int curr; ++ unsigned int dirty; ++ unsigned int size; ++}; ++ ++struct ag71xx_mdio { ++ struct mii_bus *mii_bus; ++ int mii_irq[PHY_MAX_ADDR]; ++ void __iomem *mdio_base; ++ struct ag71xx_mdio_platform_data *pdata; ++}; ++ ++struct ag71xx_int_stats { ++ unsigned long rx_pr; ++ unsigned long rx_be; ++ unsigned long rx_of; ++ unsigned long tx_ps; ++ unsigned long tx_be; ++ unsigned long tx_ur; ++ unsigned long total; ++}; ++ ++struct ag71xx_napi_stats { ++ unsigned long napi_calls; ++ unsigned long rx_count; ++ unsigned long rx_packets; ++ unsigned long rx_packets_max; ++ unsigned long tx_count; ++ unsigned long tx_packets; ++ unsigned long tx_packets_max; ++ ++ unsigned long rx[AG71XX_NAPI_WEIGHT + 1]; ++ unsigned long tx[AG71XX_NAPI_WEIGHT + 1]; ++}; ++ ++struct ag71xx_debug { ++ struct dentry *debugfs_dir; ++ ++ struct ag71xx_int_stats int_stats; ++ struct ag71xx_napi_stats napi_stats; ++}; ++ ++struct ag71xx { ++ void __iomem *mac_base; ++ void __iomem *mii_ctrl; ++ ++ spinlock_t lock; ++ struct platform_device *pdev; ++ struct net_device *dev; ++ struct napi_struct napi; ++ u32 msg_enable; ++ ++ struct ag71xx_desc *stop_desc; ++ dma_addr_t stop_desc_dma; ++ ++ struct ag71xx_ring rx_ring; ++ struct ag71xx_ring tx_ring; ++ ++ struct mii_bus *mii_bus; ++ struct phy_device *phy_dev; ++ void *phy_priv; ++ ++ unsigned int link; ++ unsigned int speed; ++ int duplex; ++ ++ struct work_struct restart_work; ++ struct delayed_work link_work; ++ struct timer_list oom_timer; ++ ++#ifdef CONFIG_AG71XX_DEBUG_FS ++ struct ag71xx_debug debug; ++#endif ++}; ++ ++extern struct ethtool_ops ag71xx_ethtool_ops; ++void ag71xx_link_adjust(struct ag71xx *ag); ++ ++int ag71xx_mdio_driver_init(void) __init; ++void ag71xx_mdio_driver_exit(void); ++ ++int ag71xx_phy_connect(struct ag71xx *ag); ++void ag71xx_phy_disconnect(struct ag71xx *ag); ++void ag71xx_phy_start(struct ag71xx *ag); ++void ag71xx_phy_stop(struct ag71xx *ag); ++ ++static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag) ++{ ++ return ag->pdev->dev.platform_data; ++} ++ ++static inline int ag71xx_desc_empty(struct ag71xx_desc *desc) ++{ ++ return (desc->ctrl & DESC_EMPTY) != 0; ++} ++ ++static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc) ++{ ++ return desc->ctrl & DESC_PKTLEN_M; ++} ++ ++/* Register offsets */ ++#define AG71XX_REG_MAC_CFG1 0x0000 ++#define AG71XX_REG_MAC_CFG2 0x0004 ++#define AG71XX_REG_MAC_IPG 0x0008 ++#define AG71XX_REG_MAC_HDX 0x000c ++#define AG71XX_REG_MAC_MFL 0x0010 ++#define AG71XX_REG_MII_CFG 0x0020 ++#define AG71XX_REG_MII_CMD 0x0024 ++#define AG71XX_REG_MII_ADDR 0x0028 ++#define AG71XX_REG_MII_CTRL 0x002c ++#define AG71XX_REG_MII_STATUS 0x0030 ++#define AG71XX_REG_MII_IND 0x0034 ++#define AG71XX_REG_MAC_IFCTL 0x0038 ++#define AG71XX_REG_MAC_ADDR1 0x0040 ++#define AG71XX_REG_MAC_ADDR2 0x0044 ++#define AG71XX_REG_FIFO_CFG0 0x0048 ++#define AG71XX_REG_FIFO_CFG1 0x004c ++#define AG71XX_REG_FIFO_CFG2 0x0050 ++#define AG71XX_REG_FIFO_CFG3 0x0054 ++#define AG71XX_REG_FIFO_CFG4 0x0058 ++#define AG71XX_REG_FIFO_CFG5 0x005c ++#define AG71XX_REG_FIFO_RAM0 0x0060 ++#define AG71XX_REG_FIFO_RAM1 0x0064 ++#define AG71XX_REG_FIFO_RAM2 0x0068 ++#define AG71XX_REG_FIFO_RAM3 0x006c ++#define AG71XX_REG_FIFO_RAM4 0x0070 ++#define AG71XX_REG_FIFO_RAM5 0x0074 ++#define AG71XX_REG_FIFO_RAM6 0x0078 ++#define AG71XX_REG_FIFO_RAM7 0x007c ++ ++#define AG71XX_REG_TX_CTRL 0x0180 ++#define AG71XX_REG_TX_DESC 0x0184 ++#define AG71XX_REG_TX_STATUS 0x0188 ++#define AG71XX_REG_RX_CTRL 0x018c ++#define AG71XX_REG_RX_DESC 0x0190 ++#define AG71XX_REG_RX_STATUS 0x0194 ++#define AG71XX_REG_INT_ENABLE 0x0198 ++#define AG71XX_REG_INT_STATUS 0x019c ++ ++#define AG71XX_REG_FIFO_DEPTH 0x01a8 ++#define AG71XX_REG_RX_SM 0x01b0 ++#define AG71XX_REG_TX_SM 0x01b4 ++ ++#define MAC_CFG1_TXE BIT(0) /* Tx Enable */ ++#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */ ++#define MAC_CFG1_RXE BIT(2) /* Rx Enable */ ++#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */ ++#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */ ++#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */ ++#define MAC_CFG1_LB BIT(8) /* Loopback mode */ ++#define MAC_CFG1_SR BIT(31) /* Soft Reset */ ++ ++#define MAC_CFG2_FDX BIT(0) ++#define MAC_CFG2_CRC_EN BIT(1) ++#define MAC_CFG2_PAD_CRC_EN BIT(2) ++#define MAC_CFG2_LEN_CHECK BIT(4) ++#define MAC_CFG2_HUGE_FRAME_EN BIT(5) ++#define MAC_CFG2_IF_1000 BIT(9) ++#define MAC_CFG2_IF_10_100 BIT(8) ++ ++#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */ ++#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */ ++#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */ ++#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */ ++#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */ ++#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \ ++ | FIFO_CFG0_TXS | FIFO_CFG0_TXF) ++ ++#define FIFO_CFG0_ENABLE_SHIFT 8 ++ ++#define FIFO_CFG4_DE BIT(0) /* Drop Event */ ++#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */ ++#define FIFO_CFG4_FC BIT(2) /* False Carrier */ ++#define FIFO_CFG4_CE BIT(3) /* Code Error */ ++#define FIFO_CFG4_CR BIT(4) /* CRC error */ ++#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */ ++#define FIFO_CFG4_LO BIT(6) /* Length out of range */ ++#define FIFO_CFG4_OK BIT(7) /* Packet is OK */ ++#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */ ++#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */ ++#define FIFO_CFG4_DR BIT(10) /* Dribble */ ++#define FIFO_CFG4_LE BIT(11) /* Long Event */ ++#define FIFO_CFG4_CF BIT(12) /* Control Frame */ ++#define FIFO_CFG4_PF BIT(13) /* Pause Frame */ ++#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */ ++#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */ ++#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */ ++#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */ ++ ++#define FIFO_CFG5_DE BIT(0) /* Drop Event */ ++#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */ ++#define FIFO_CFG5_FC BIT(2) /* False Carrier */ ++#define FIFO_CFG5_CE BIT(3) /* Code Error */ ++#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */ ++#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */ ++#define FIFO_CFG5_OK BIT(6) /* Packet is OK */ ++#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */ ++#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */ ++#define FIFO_CFG5_DR BIT(9) /* Dribble */ ++#define FIFO_CFG5_CF BIT(10) /* Control Frame */ ++#define FIFO_CFG5_PF BIT(11) /* Pause Frame */ ++#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */ ++#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */ ++#define FIFO_CFG5_LE BIT(14) /* Long Event */ ++#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */ ++#define FIFO_CFG5_16 BIT(16) /* unknown */ ++#define FIFO_CFG5_17 BIT(17) /* unknown */ ++#define FIFO_CFG5_SF BIT(18) /* Short Frame */ ++#define FIFO_CFG5_BM BIT(19) /* Byte Mode */ ++ ++#define AG71XX_INT_TX_PS BIT(0) ++#define AG71XX_INT_TX_UR BIT(1) ++#define AG71XX_INT_TX_BE BIT(3) ++#define AG71XX_INT_RX_PR BIT(4) ++#define AG71XX_INT_RX_OF BIT(6) ++#define AG71XX_INT_RX_BE BIT(7) ++ ++#define MAC_IFCTL_SPEED BIT(16) ++ ++#define MII_CFG_CLK_DIV_4 0 ++#define MII_CFG_CLK_DIV_6 2 ++#define MII_CFG_CLK_DIV_8 3 ++#define MII_CFG_CLK_DIV_10 4 ++#define MII_CFG_CLK_DIV_14 5 ++#define MII_CFG_CLK_DIV_20 6 ++#define MII_CFG_CLK_DIV_28 7 ++#define MII_CFG_RESET BIT(31) ++ ++#define MII_CMD_WRITE 0x0 ++#define MII_CMD_READ 0x1 ++#define MII_ADDR_SHIFT 8 ++#define MII_IND_BUSY BIT(0) ++#define MII_IND_INVALID BIT(2) ++ ++#define TX_CTRL_TXE BIT(0) /* Tx Enable */ ++ ++#define TX_STATUS_PS BIT(0) /* Packet Sent */ ++#define TX_STATUS_UR BIT(1) /* Tx Underrun */ ++#define TX_STATUS_BE BIT(3) /* Bus Error */ ++ ++#define RX_CTRL_RXE BIT(0) /* Rx Enable */ ++ ++#define RX_STATUS_PR BIT(0) /* Packet Received */ ++#define RX_STATUS_OF BIT(2) /* Rx Overflow */ ++#define RX_STATUS_BE BIT(3) /* Bus Error */ ++ ++#define MII_CTRL_IF_MASK 3 ++#define MII_CTRL_SPEED_SHIFT 4 ++#define MII_CTRL_SPEED_MASK 3 ++#define MII_CTRL_SPEED_10 0 ++#define MII_CTRL_SPEED_100 1 ++#define MII_CTRL_SPEED_1000 2 ++ ++static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg) ++{ ++ switch (reg) { ++ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL: ++ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_INT_STATUS: ++ case AG71XX_REG_MII_CFG: ++ break; ++ ++ default: ++ BUG(); ++ } ++} ++ ++static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value) ++{ ++ ag71xx_check_reg_offset(ag, reg); ++ ++ __raw_writel(value, ag->mac_base + reg); ++ /* flush write */ ++ (void) __raw_readl(ag->mac_base + reg); ++} ++ ++static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg) ++{ ++ ag71xx_check_reg_offset(ag, reg); ++ ++ return __raw_readl(ag->mac_base + reg); ++} ++ ++static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask) ++{ ++ void __iomem *r; ++ ++ ag71xx_check_reg_offset(ag, reg); ++ ++ r = ag->mac_base + reg; ++ __raw_writel(__raw_readl(r) | mask, r); ++ /* flush write */ ++ (void)__raw_readl(r); ++} ++ ++static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask) ++{ ++ void __iomem *r; ++ ++ ag71xx_check_reg_offset(ag, reg); ++ ++ r = ag->mac_base + reg; ++ __raw_writel(__raw_readl(r) & ~mask, r); ++ /* flush write */ ++ (void) __raw_readl(r); ++} ++ ++static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints) ++{ ++ ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints); ++} ++ ++static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints) ++{ ++ ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints); ++} ++ ++static inline void ag71xx_mii_ctrl_wr(struct ag71xx *ag, u32 value) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ ++ if (pdata->is_ar724x) ++ return; ++ ++ __raw_writel(value, ag->mii_ctrl); ++ ++ /* flush write */ ++ __raw_readl(ag->mii_ctrl); ++} ++ ++static inline u32 ag71xx_mii_ctrl_rr(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ ++ if (pdata->is_ar724x) ++ return 0xffffffff; ++ ++ return __raw_readl(ag->mii_ctrl); ++} ++ ++static inline void ag71xx_mii_ctrl_set_if(struct ag71xx *ag, ++ unsigned int mii_if) ++{ ++ u32 t; ++ ++ t = ag71xx_mii_ctrl_rr(ag); ++ t &= ~(MII_CTRL_IF_MASK); ++ t |= (mii_if & MII_CTRL_IF_MASK); ++ ag71xx_mii_ctrl_wr(ag, t); ++} ++ ++static inline void ag71xx_mii_ctrl_set_speed(struct ag71xx *ag, ++ unsigned int speed) ++{ ++ u32 t; ++ ++ t = ag71xx_mii_ctrl_rr(ag); ++ t &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT); ++ t |= (speed & MII_CTRL_SPEED_MASK) << MII_CTRL_SPEED_SHIFT; ++ ag71xx_mii_ctrl_wr(ag, t); ++} ++ ++#ifdef CONFIG_AG71XX_AR8216_SUPPORT ++void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb); ++int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, ++ int pktlen); ++static inline int ag71xx_has_ar8216(struct ag71xx *ag) ++{ ++ return ag71xx_get_pdata(ag)->has_ar8216; ++} ++#else ++static inline void ag71xx_add_ar8216_header(struct ag71xx *ag, ++ struct sk_buff *skb) ++{ ++} ++ ++static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag, ++ struct sk_buff *skb, ++ int pktlen) ++{ ++ return 0; ++} ++static inline int ag71xx_has_ar8216(struct ag71xx *ag) ++{ ++ return 0; ++} ++#endif ++ ++#ifdef CONFIG_AG71XX_DEBUG_FS ++int ag71xx_debugfs_root_init(void); ++void ag71xx_debugfs_root_exit(void); ++int ag71xx_debugfs_init(struct ag71xx *ag); ++void ag71xx_debugfs_exit(struct ag71xx *ag); ++void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status); ++void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx); ++#else ++static inline int ag71xx_debugfs_root_init(void) { return 0; } ++static inline void ag71xx_debugfs_root_exit(void) {} ++static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; } ++static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {} ++static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, ++ u32 status) {} ++static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, ++ int rx, int tx) {} ++#endif /* CONFIG_AG71XX_DEBUG_FS */ ++ ++void ag71xx_ar7240_start(struct ag71xx *ag); ++void ag71xx_ar7240_stop(struct ag71xx *ag); ++int ag71xx_ar7240_init(struct ag71xx *ag); ++void ag71xx_ar7240_cleanup(struct ag71xx *ag); ++ ++int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg); ++void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val); ++ ++u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, ++ unsigned reg_addr); ++int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, ++ unsigned reg_addr, u16 reg_val); ++ ++#endif /* _AG71XX_H */ +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_main.c linux-2.6.39/drivers/net/ag71xx/ag71xx_main.c +--- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_main.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_main.c 2011-08-22 07:40:12.160480642 +0200 +@@ -0,0 +1,1291 @@ ++/* ++ * Atheros AR71xx built-in ethernet mac driver ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Based on Atheros' AG7100 driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include "ag71xx.h" ++ ++#define AG71XX_DEFAULT_MSG_ENABLE \ ++ (NETIF_MSG_DRV \ ++ | NETIF_MSG_PROBE \ ++ | NETIF_MSG_LINK \ ++ | NETIF_MSG_TIMER \ ++ | NETIF_MSG_IFDOWN \ ++ | NETIF_MSG_IFUP \ ++ | NETIF_MSG_RX_ERR \ ++ | NETIF_MSG_TX_ERR) ++ ++static int ag71xx_msg_level = -1; ++ ++module_param_named(msg_level, ag71xx_msg_level, int, 0); ++MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)"); ++ ++static void ag71xx_dump_dma_regs(struct ag71xx *ag) ++{ ++ DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n", ++ ag->dev->name, ++ ag71xx_rr(ag, AG71XX_REG_TX_CTRL), ++ ag71xx_rr(ag, AG71XX_REG_TX_DESC), ++ ag71xx_rr(ag, AG71XX_REG_TX_STATUS)); ++ ++ DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n", ++ ag->dev->name, ++ ag71xx_rr(ag, AG71XX_REG_RX_CTRL), ++ ag71xx_rr(ag, AG71XX_REG_RX_DESC), ++ ag71xx_rr(ag, AG71XX_REG_RX_STATUS)); ++} ++ ++static void ag71xx_dump_regs(struct ag71xx *ag) ++{ ++ DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n", ++ ag->dev->name, ++ ag71xx_rr(ag, AG71XX_REG_MAC_CFG1), ++ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), ++ ag71xx_rr(ag, AG71XX_REG_MAC_IPG), ++ ag71xx_rr(ag, AG71XX_REG_MAC_HDX), ++ ag71xx_rr(ag, AG71XX_REG_MAC_MFL)); ++ DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n", ++ ag->dev->name, ++ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL), ++ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1), ++ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2)); ++ DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n", ++ ag->dev->name, ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); ++ DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n", ++ ag->dev->name, ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); ++} ++ ++static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr) ++{ ++ DBG("%s: %s intr=%08x %s%s%s%s%s%s\n", ++ ag->dev->name, label, intr, ++ (intr & AG71XX_INT_TX_PS) ? "TXPS " : "", ++ (intr & AG71XX_INT_TX_UR) ? "TXUR " : "", ++ (intr & AG71XX_INT_TX_BE) ? "TXBE " : "", ++ (intr & AG71XX_INT_RX_PR) ? "RXPR " : "", ++ (intr & AG71XX_INT_RX_OF) ? "RXOF " : "", ++ (intr & AG71XX_INT_RX_BE) ? "RXBE " : ""); ++} ++ ++static void ag71xx_ring_free(struct ag71xx_ring *ring) ++{ ++ kfree(ring->buf); ++ ++ if (ring->descs_cpu) ++ dma_free_coherent(NULL, ring->size * ring->desc_size, ++ ring->descs_cpu, ring->descs_dma); ++} ++ ++static int ag71xx_ring_alloc(struct ag71xx_ring *ring) ++{ ++ int err; ++ int i; ++ ++ ring->desc_size = sizeof(struct ag71xx_desc); ++ if (ring->desc_size % cache_line_size()) { ++ DBG("ag71xx: ring %p, desc size %u rounded to %u\n", ++ ring, ring->desc_size, ++ roundup(ring->desc_size, cache_line_size())); ++ ring->desc_size = roundup(ring->desc_size, cache_line_size()); ++ } ++ ++ ring->descs_cpu = dma_alloc_coherent(NULL, ring->size * ring->desc_size, ++ &ring->descs_dma, GFP_ATOMIC); ++ if (!ring->descs_cpu) { ++ err = -ENOMEM; ++ goto err; ++ } ++ ++ ++ ring->buf = kzalloc(ring->size * sizeof(*ring->buf), GFP_KERNEL); ++ if (!ring->buf) { ++ err = -ENOMEM; ++ goto err; ++ } ++ ++ for (i = 0; i < ring->size; i++) { ++ int idx = i * ring->desc_size; ++ ring->buf[i].desc = (struct ag71xx_desc *)&ring->descs_cpu[idx]; ++ DBG("ag71xx: ring %p, desc %d at %p\n", ++ ring, i, ring->buf[i].desc); ++ } ++ ++ return 0; ++ ++err: ++ return err; ++} ++ ++static void ag71xx_ring_tx_clean(struct ag71xx *ag) ++{ ++ struct ag71xx_ring *ring = &ag->tx_ring; ++ struct net_device *dev = ag->dev; ++ ++ while (ring->curr != ring->dirty) { ++ u32 i = ring->dirty % ring->size; ++ ++ if (!ag71xx_desc_empty(ring->buf[i].desc)) { ++ ring->buf[i].desc->ctrl = 0; ++ dev->stats.tx_errors++; ++ } ++ ++ if (ring->buf[i].skb) ++ dev_kfree_skb_any(ring->buf[i].skb); ++ ++ ring->buf[i].skb = NULL; ++ ++ ring->dirty++; ++ } ++ ++ /* flush descriptors */ ++ wmb(); ++ ++} ++ ++static void ag71xx_ring_tx_init(struct ag71xx *ag) ++{ ++ struct ag71xx_ring *ring = &ag->tx_ring; ++ int i; ++ ++ for (i = 0; i < ring->size; i++) { ++ ring->buf[i].desc->next = (u32) (ring->descs_dma + ++ ring->desc_size * ((i + 1) % ring->size)); ++ ++ ring->buf[i].desc->ctrl = DESC_EMPTY; ++ ring->buf[i].skb = NULL; ++ } ++ ++ /* flush descriptors */ ++ wmb(); ++ ++ ring->curr = 0; ++ ring->dirty = 0; ++} ++ ++static void ag71xx_ring_rx_clean(struct ag71xx *ag) ++{ ++ struct ag71xx_ring *ring = &ag->rx_ring; ++ int i; ++ ++ if (!ring->buf) ++ return; ++ ++ for (i = 0; i < ring->size; i++) ++ if (ring->buf[i].skb) { ++ dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr, ++ AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE); ++ kfree_skb(ring->buf[i].skb); ++ } ++} ++ ++static int ag71xx_rx_reserve(struct ag71xx *ag) ++{ ++ int reserve = 0; ++ ++ if (ag71xx_get_pdata(ag)->is_ar724x) { ++ if (!ag71xx_has_ar8216(ag)) ++ reserve = 2; ++ ++ if (ag->phy_dev) ++ reserve += 4 - (ag->phy_dev->pkt_align % 4); ++ ++ reserve %= 4; ++ } ++ ++ return reserve + AG71XX_RX_PKT_RESERVE; ++} ++ ++ ++static int ag71xx_ring_rx_init(struct ag71xx *ag) ++{ ++ struct ag71xx_ring *ring = &ag->rx_ring; ++ unsigned int reserve = ag71xx_rx_reserve(ag); ++ unsigned int i; ++ int ret; ++ ++ ret = 0; ++ for (i = 0; i < ring->size; i++) { ++ ring->buf[i].desc->next = (u32) (ring->descs_dma + ++ ring->desc_size * ((i + 1) % ring->size)); ++ ++ DBG("ag71xx: RX desc at %p, next is %08x\n", ++ ring->buf[i].desc, ++ ring->buf[i].desc->next); ++ } ++ ++ for (i = 0; i < ring->size; i++) { ++ struct sk_buff *skb; ++ dma_addr_t dma_addr; ++ ++ skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve); ++ if (!skb) { ++ ret = -ENOMEM; ++ break; ++ } ++ ++ skb->dev = ag->dev; ++ skb_reserve(skb, reserve); ++ ++ dma_addr = dma_map_single(&ag->dev->dev, skb->data, ++ AG71XX_RX_PKT_SIZE, ++ DMA_FROM_DEVICE); ++ ring->buf[i].skb = skb; ++ ring->buf[i].dma_addr = dma_addr; ++ ring->buf[i].desc->data = (u32) dma_addr; ++ ring->buf[i].desc->ctrl = DESC_EMPTY; ++ } ++ ++ /* flush descriptors */ ++ wmb(); ++ ++ ring->curr = 0; ++ ring->dirty = 0; ++ ++ return ret; ++} ++ ++static int ag71xx_ring_rx_refill(struct ag71xx *ag) ++{ ++ struct ag71xx_ring *ring = &ag->rx_ring; ++ unsigned int reserve = ag71xx_rx_reserve(ag); ++ unsigned int count; ++ ++ count = 0; ++ for (; ring->curr - ring->dirty > 0; ring->dirty++) { ++ unsigned int i; ++ ++ i = ring->dirty % ring->size; ++ ++ if (ring->buf[i].skb == NULL) { ++ dma_addr_t dma_addr; ++ struct sk_buff *skb; ++ ++ skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve); ++ if (skb == NULL) ++ break; ++ ++ skb_reserve(skb, reserve); ++ skb->dev = ag->dev; ++ ++ dma_addr = dma_map_single(&ag->dev->dev, skb->data, ++ AG71XX_RX_PKT_SIZE, ++ DMA_FROM_DEVICE); ++ ++ ring->buf[i].skb = skb; ++ ring->buf[i].dma_addr = dma_addr; ++ ring->buf[i].desc->data = (u32) dma_addr; ++ } ++ ++ ring->buf[i].desc->ctrl = DESC_EMPTY; ++ count++; ++ } ++ ++ /* flush descriptors */ ++ wmb(); ++ ++ DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count); ++ ++ return count; ++} ++ ++static int ag71xx_rings_init(struct ag71xx *ag) ++{ ++ int ret; ++ ++ ret = ag71xx_ring_alloc(&ag->tx_ring); ++ if (ret) ++ return ret; ++ ++ ag71xx_ring_tx_init(ag); ++ ++ ret = ag71xx_ring_alloc(&ag->rx_ring); ++ if (ret) ++ return ret; ++ ++ ret = ag71xx_ring_rx_init(ag); ++ return ret; ++} ++ ++static void ag71xx_rings_cleanup(struct ag71xx *ag) ++{ ++ ag71xx_ring_rx_clean(ag); ++ ag71xx_ring_free(&ag->rx_ring); ++ ++ ag71xx_ring_tx_clean(ag); ++ ag71xx_ring_free(&ag->tx_ring); ++} ++ ++static unsigned char *ag71xx_speed_str(struct ag71xx *ag) ++{ ++ switch (ag->speed) { ++ case SPEED_1000: ++ return "1000"; ++ case SPEED_100: ++ return "100"; ++ case SPEED_10: ++ return "10"; ++ } ++ ++ return "?"; ++} ++ ++static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac) ++{ ++ u32 t; ++ ++ t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16) ++ | (((u32) mac[3]) << 8) | ((u32) mac[2]); ++ ++ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t); ++ ++ t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16); ++ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t); ++} ++ ++static void ag71xx_dma_reset(struct ag71xx *ag) ++{ ++ u32 val; ++ int i; ++ ++ ag71xx_dump_dma_regs(ag); ++ ++ /* stop RX and TX */ ++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); ++ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); ++ ++ /* ++ * give the hardware some time to really stop all rx/tx activity ++ * clearing the descriptors too early causes random memory corruption ++ */ ++ mdelay(1); ++ ++ /* clear descriptor addresses */ ++ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma); ++ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma); ++ ++ /* clear pending RX/TX interrupts */ ++ for (i = 0; i < 256; i++) { ++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); ++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); ++ } ++ ++ /* clear pending errors */ ++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF); ++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR); ++ ++ val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); ++ if (val) ++ printk(KERN_ALERT "%s: unable to clear DMA Rx status: %08x\n", ++ ag->dev->name, val); ++ ++ val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); ++ ++ /* mask out reserved bits */ ++ val &= ~0xff000000; ++ ++ if (val) ++ printk(KERN_ALERT "%s: unable to clear DMA Tx status: %08x\n", ++ ag->dev->name, val); ++ ++ ag71xx_dump_dma_regs(ag); ++} ++ ++#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \ ++ MAC_CFG1_SRX | MAC_CFG1_STX) ++ ++#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT) ++ ++#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \ ++ FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \ ++ FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \ ++ FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \ ++ FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \ ++ FIFO_CFG4_VT) ++ ++#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \ ++ FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \ ++ FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \ ++ FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \ ++ FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \ ++ FIFO_CFG5_17 | FIFO_CFG5_SF) ++ ++static void ag71xx_hw_stop(struct ag71xx *ag) ++{ ++ /* disable all interrupts and stop the rx/tx engine */ ++ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0); ++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0); ++ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0); ++} ++ ++static void ag71xx_hw_setup(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ ++ /* setup MAC configuration registers */ ++ ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT); ++ ++ ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, ++ MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK); ++ ++ /* setup max frame length */ ++ ag71xx_wr(ag, AG71XX_REG_MAC_MFL, AG71XX_TX_MTU_LEN); ++ ++ /* setup MII interface type */ ++ ag71xx_mii_ctrl_set_if(ag, pdata->mii_if); ++ ++ /* setup FIFO configuration registers */ ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT); ++ if (pdata->is_ar724x) { ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1); ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2); ++ } else { ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000); ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff); ++ } ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT); ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT); ++} ++ ++static void ag71xx_hw_init(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ u32 reset_mask = pdata->reset_bit; ++ ++ ag71xx_hw_stop(ag); ++ ++ if (pdata->is_ar724x) { ++ u32 reset_phy = reset_mask; ++ ++ reset_phy &= RESET_MODULE_GE0_PHY | RESET_MODULE_GE1_PHY; ++ reset_mask &= ~(RESET_MODULE_GE0_PHY | RESET_MODULE_GE1_PHY); ++ ++ ar71xx_device_stop(reset_phy); ++ mdelay(50); ++ ar71xx_device_start(reset_phy); ++ mdelay(200); ++ } ++ ++ ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR); ++ udelay(20); ++ ++ ar71xx_device_stop(reset_mask); ++ mdelay(100); ++ ar71xx_device_start(reset_mask); ++ mdelay(200); ++ ++ ag71xx_hw_setup(ag); ++ ++ ag71xx_dma_reset(ag); ++} ++ ++static void ag71xx_fast_reset(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ struct net_device *dev = ag->dev; ++ u32 reset_mask = pdata->reset_bit; ++ u32 rx_ds, tx_ds; ++ u32 mii_reg; ++ ++ reset_mask &= RESET_MODULE_GE0_MAC | RESET_MODULE_GE1_MAC; ++ ++ mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG); ++ rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC); ++ tx_ds = ag71xx_rr(ag, AG71XX_REG_TX_DESC); ++ ++ ar71xx_device_stop(reset_mask); ++ udelay(10); ++ ar71xx_device_start(reset_mask); ++ udelay(10); ++ ++ ag71xx_dma_reset(ag); ++ ag71xx_hw_setup(ag); ++ ++ ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds); ++ ag71xx_wr(ag, AG71XX_REG_TX_DESC, tx_ds); ++ ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg); ++ ++ ag71xx_hw_set_macaddr(ag, dev->dev_addr); ++} ++ ++static void ag71xx_hw_start(struct ag71xx *ag) ++{ ++ /* start RX engine */ ++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); ++ ++ /* enable interrupts */ ++ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT); ++} ++ ++void ag71xx_link_adjust(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ u32 cfg2; ++ u32 ifctl; ++ u32 fifo5; ++ u32 mii_speed; ++ ++ if (!ag->link) { ++ ag71xx_hw_stop(ag); ++ netif_carrier_off(ag->dev); ++ if (netif_msg_link(ag)) ++ printk(KERN_INFO "%s: link down\n", ag->dev->name); ++ return; ++ } ++ ++ if (pdata->is_ar724x) ++ ag71xx_fast_reset(ag); ++ ++ cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2); ++ cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX); ++ cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0; ++ ++ ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL); ++ ifctl &= ~(MAC_IFCTL_SPEED); ++ ++ fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5); ++ fifo5 &= ~FIFO_CFG5_BM; ++ ++ switch (ag->speed) { ++ case SPEED_1000: ++ mii_speed = MII_CTRL_SPEED_1000; ++ cfg2 |= MAC_CFG2_IF_1000; ++ fifo5 |= FIFO_CFG5_BM; ++ break; ++ case SPEED_100: ++ mii_speed = MII_CTRL_SPEED_100; ++ cfg2 |= MAC_CFG2_IF_10_100; ++ ifctl |= MAC_IFCTL_SPEED; ++ break; ++ case SPEED_10: ++ mii_speed = MII_CTRL_SPEED_10; ++ cfg2 |= MAC_CFG2_IF_10_100; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ if (pdata->is_ar91xx) ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff); ++ else if (pdata->is_ar724x) ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3); ++ else ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff); ++ ++ if (pdata->set_pll) ++ pdata->set_pll(ag->speed); ++ ++ ag71xx_mii_ctrl_set_speed(ag, mii_speed); ++ ++ ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2); ++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5); ++ ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl); ++ ag71xx_hw_start(ag); ++ ++ netif_carrier_on(ag->dev); ++ if (netif_msg_link(ag)) ++ printk(KERN_INFO "%s: link up (%sMbps/%s duplex)\n", ++ ag->dev->name, ++ ag71xx_speed_str(ag), ++ (DUPLEX_FULL == ag->duplex) ? "Full" : "Half"); ++ ++ DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n", ++ ag->dev->name, ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0), ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1), ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2)); ++ ++ DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n", ++ ag->dev->name, ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3), ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4), ++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5)); ++ ++ DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x, mii_ctrl=%#x\n", ++ ag->dev->name, ++ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2), ++ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL), ++ ag71xx_mii_ctrl_rr(ag)); ++} ++ ++static int ag71xx_open(struct net_device *dev) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ int ret; ++ ++ ret = ag71xx_rings_init(ag); ++ if (ret) ++ goto err; ++ ++ napi_enable(&ag->napi); ++ ++ netif_carrier_off(dev); ++ ag71xx_phy_start(ag); ++ ++ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma); ++ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma); ++ ++ ag71xx_hw_set_macaddr(ag, dev->dev_addr); ++ ++ netif_start_queue(dev); ++ ++ return 0; ++ ++err: ++ ag71xx_rings_cleanup(ag); ++ return ret; ++} ++ ++static int ag71xx_stop(struct net_device *dev) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ unsigned long flags; ++ ++ netif_carrier_off(dev); ++ ag71xx_phy_stop(ag); ++ ++ spin_lock_irqsave(&ag->lock, flags); ++ ++ netif_stop_queue(dev); ++ ++ ag71xx_hw_stop(ag); ++ ag71xx_dma_reset(ag); ++ ++ napi_disable(&ag->napi); ++ del_timer_sync(&ag->oom_timer); ++ ++ spin_unlock_irqrestore(&ag->lock, flags); ++ ++ ag71xx_rings_cleanup(ag); ++ ++ return 0; ++} ++ ++static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb, ++ struct net_device *dev) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ struct ag71xx_ring *ring = &ag->tx_ring; ++ struct ag71xx_desc *desc; ++ dma_addr_t dma_addr; ++ int i; ++ ++ i = ring->curr % ring->size; ++ desc = ring->buf[i].desc; ++ ++ if (!ag71xx_desc_empty(desc)) ++ goto err_drop; ++ ++ if (ag71xx_has_ar8216(ag)) ++ ag71xx_add_ar8216_header(ag, skb); ++ ++ if (skb->len <= 0) { ++ DBG("%s: packet len is too small\n", ag->dev->name); ++ goto err_drop; ++ } ++ ++ dma_addr = dma_map_single(&dev->dev, skb->data, skb->len, ++ DMA_TO_DEVICE); ++ ++ ring->buf[i].skb = skb; ++ ring->buf[i].timestamp = jiffies; ++ ++ /* setup descriptor fields */ ++ desc->data = (u32) dma_addr; ++ desc->ctrl = (skb->len & DESC_PKTLEN_M); ++ ++ /* flush descriptor */ ++ wmb(); ++ ++ ring->curr++; ++ if (ring->curr == (ring->dirty + ring->size)) { ++ DBG("%s: tx queue full\n", ag->dev->name); ++ netif_stop_queue(dev); ++ } ++ ++ DBG("%s: packet injected into TX queue\n", ag->dev->name); ++ ++ /* enable TX engine */ ++ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE); ++ ++ return NETDEV_TX_OK; ++ ++err_drop: ++ dev->stats.tx_dropped++; ++ ++ dev_kfree_skb(skb); ++ return NETDEV_TX_OK; ++} ++ ++static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ int ret; ++ ++ switch (cmd) { ++ case SIOCETHTOOL: ++ if (ag->phy_dev == NULL) ++ break; ++ ++ spin_lock_irq(&ag->lock); ++ ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data); ++ spin_unlock_irq(&ag->lock); ++ return ret; ++ ++ case SIOCSIFHWADDR: ++ if (copy_from_user ++ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) ++ return -EFAULT; ++ return 0; ++ ++ case SIOCGIFHWADDR: ++ if (copy_to_user ++ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) ++ return -EFAULT; ++ return 0; ++ ++ case SIOCGMIIPHY: ++ case SIOCGMIIREG: ++ case SIOCSMIIREG: ++ if (ag->phy_dev == NULL) ++ break; ++ ++ return phy_mii_ioctl(ag->phy_dev, ifr, cmd); ++ ++ default: ++ break; ++ } ++ ++ return -EOPNOTSUPP; ++} ++ ++static void ag71xx_oom_timer_handler(unsigned long data) ++{ ++ struct net_device *dev = (struct net_device *) data; ++ struct ag71xx *ag = netdev_priv(dev); ++ ++ napi_schedule(&ag->napi); ++} ++ ++static void ag71xx_tx_timeout(struct net_device *dev) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ ++ if (netif_msg_tx_err(ag)) ++ printk(KERN_DEBUG "%s: tx timeout\n", ag->dev->name); ++ ++ schedule_work(&ag->restart_work); ++} ++ ++static void ag71xx_restart_work_func(struct work_struct *work) ++{ ++ struct ag71xx *ag = container_of(work, struct ag71xx, restart_work); ++ ++ if (ag71xx_get_pdata(ag)->is_ar724x) { ++ ag->link = 0; ++ ag71xx_link_adjust(ag); ++ return; ++ } ++ ++ ag71xx_stop(ag->dev); ++ ag71xx_open(ag->dev); ++} ++ ++static bool ag71xx_check_dma_stuck(struct ag71xx *ag, unsigned long timestamp) ++{ ++ u32 rx_sm, tx_sm, rx_fd; ++ ++ if (likely(time_before(jiffies, timestamp + HZ/10))) ++ return false; ++ ++ if (!netif_carrier_ok(ag->dev)) ++ return false; ++ ++ rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM); ++ if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6) ++ return true; ++ ++ tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM); ++ rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH); ++ if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) && ++ ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0) ++ return true; ++ ++ return false; ++} ++ ++static int ag71xx_tx_packets(struct ag71xx *ag) ++{ ++ struct ag71xx_ring *ring = &ag->tx_ring; ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ int sent; ++ ++ DBG("%s: processing TX ring\n", ag->dev->name); ++ ++ sent = 0; ++ while (ring->dirty != ring->curr) { ++ unsigned int i = ring->dirty % ring->size; ++ struct ag71xx_desc *desc = ring->buf[i].desc; ++ struct sk_buff *skb = ring->buf[i].skb; ++ ++ if (!ag71xx_desc_empty(desc)) { ++ if (pdata->is_ar7240 && ++ ag71xx_check_dma_stuck(ag, ring->buf[i].timestamp)) ++ schedule_work(&ag->restart_work); ++ break; ++ } ++ ++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS); ++ ++ ag->dev->stats.tx_bytes += skb->len; ++ ag->dev->stats.tx_packets++; ++ ++ dev_kfree_skb_any(skb); ++ ring->buf[i].skb = NULL; ++ ++ ring->dirty++; ++ sent++; ++ } ++ ++ DBG("%s: %d packets sent out\n", ag->dev->name, sent); ++ ++ if ((ring->curr - ring->dirty) < (ring->size * 3) / 4) ++ netif_wake_queue(ag->dev); ++ ++ return sent; ++} ++ ++static int ag71xx_rx_packets(struct ag71xx *ag, int limit) ++{ ++ struct net_device *dev = ag->dev; ++ struct ag71xx_ring *ring = &ag->rx_ring; ++ int done = 0; ++ ++ DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n", ++ dev->name, limit, ring->curr, ring->dirty); ++ ++ while (done < limit) { ++ unsigned int i = ring->curr % ring->size; ++ struct ag71xx_desc *desc = ring->buf[i].desc; ++ struct sk_buff *skb; ++ int pktlen; ++ int err = 0; ++ ++ if (ag71xx_desc_empty(desc)) ++ break; ++ ++ if ((ring->dirty + ring->size) == ring->curr) { ++ ag71xx_assert(0); ++ break; ++ } ++ ++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR); ++ ++ skb = ring->buf[i].skb; ++ pktlen = ag71xx_desc_pktlen(desc); ++ pktlen -= ETH_FCS_LEN; ++ ++ dma_unmap_single(&dev->dev, ring->buf[i].dma_addr, ++ AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE); ++ ++ dev->last_rx = jiffies; ++ dev->stats.rx_packets++; ++ dev->stats.rx_bytes += pktlen; ++ ++ skb_put(skb, pktlen); ++ if (ag71xx_has_ar8216(ag)) ++ err = ag71xx_remove_ar8216_header(ag, skb, pktlen); ++ ++ if (err) { ++ dev->stats.rx_dropped++; ++ kfree_skb(skb); ++ } else { ++ skb->dev = dev; ++ skb->ip_summed = CHECKSUM_NONE; ++ if (ag->phy_dev) { ++ ag->phy_dev->netif_receive_skb(skb); ++ } else { ++ skb->protocol = eth_type_trans(skb, dev); ++ netif_receive_skb(skb); ++ } ++ } ++ ++ ring->buf[i].skb = NULL; ++ done++; ++ ++ ring->curr++; ++ } ++ ++ ag71xx_ring_rx_refill(ag); ++ ++ DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n", ++ dev->name, ring->curr, ring->dirty, done); ++ ++ return done; ++} ++ ++static int ag71xx_poll(struct napi_struct *napi, int limit) ++{ ++ struct ag71xx *ag = container_of(napi, struct ag71xx, napi); ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ struct net_device *dev = ag->dev; ++ struct ag71xx_ring *rx_ring; ++ unsigned long flags; ++ u32 status; ++ int tx_done; ++ int rx_done; ++ ++ pdata->ddr_flush(); ++ tx_done = ag71xx_tx_packets(ag); ++ ++ DBG("%s: processing RX ring\n", dev->name); ++ rx_done = ag71xx_rx_packets(ag, limit); ++ ++ ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done); ++ ++ rx_ring = &ag->rx_ring; ++ if (rx_ring->buf[rx_ring->dirty % rx_ring->size].skb == NULL) ++ goto oom; ++ ++ status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS); ++ if (unlikely(status & RX_STATUS_OF)) { ++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF); ++ dev->stats.rx_fifo_errors++; ++ ++ /* restart RX */ ++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE); ++ } ++ ++ if (rx_done < limit) { ++ if (status & RX_STATUS_PR) ++ goto more; ++ ++ status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS); ++ if (status & TX_STATUS_PS) ++ goto more; ++ ++ DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n", ++ dev->name, rx_done, tx_done, limit); ++ ++ napi_complete(napi); ++ ++ /* enable interrupts */ ++ spin_lock_irqsave(&ag->lock, flags); ++ ag71xx_int_enable(ag, AG71XX_INT_POLL); ++ spin_unlock_irqrestore(&ag->lock, flags); ++ return rx_done; ++ } ++ ++more: ++ DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n", ++ dev->name, rx_done, tx_done, limit); ++ return rx_done; ++ ++oom: ++ if (netif_msg_rx_err(ag)) ++ printk(KERN_DEBUG "%s: out of memory\n", dev->name); ++ ++ mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL); ++ napi_complete(napi); ++ return 0; ++} ++ ++static irqreturn_t ag71xx_interrupt(int irq, void *dev_id) ++{ ++ struct net_device *dev = dev_id; ++ struct ag71xx *ag = netdev_priv(dev); ++ u32 status; ++ ++ status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS); ++ ag71xx_dump_intr(ag, "raw", status); ++ ++ if (unlikely(!status)) ++ return IRQ_NONE; ++ ++ if (unlikely(status & AG71XX_INT_ERR)) { ++ if (status & AG71XX_INT_TX_BE) { ++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE); ++ dev_err(&dev->dev, "TX BUS error\n"); ++ } ++ if (status & AG71XX_INT_RX_BE) { ++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE); ++ dev_err(&dev->dev, "RX BUS error\n"); ++ } ++ } ++ ++ if (likely(status & AG71XX_INT_POLL)) { ++ ag71xx_int_disable(ag, AG71XX_INT_POLL); ++ DBG("%s: enable polling mode\n", dev->name); ++ napi_schedule(&ag->napi); ++ } ++ ++ ag71xx_debugfs_update_int_stats(ag, status); ++ ++ return IRQ_HANDLED; ++} ++ ++static void ag71xx_set_multicast_list(struct net_device *dev) ++{ ++ /* TODO */ ++} ++ ++#ifdef CONFIG_NET_POLL_CONTROLLER ++/* ++ * Polling 'interrupt' - used by things like netconsole to send skbs ++ * without having to re-enable interrupts. It's not called while ++ * the interrupt routine is executing. ++ */ ++static void ag71xx_netpoll(struct net_device *dev) ++{ ++ disable_irq(dev->irq); ++ ag71xx_interrupt(dev->irq, dev); ++ enable_irq(dev->irq); ++} ++#endif ++ ++static const struct net_device_ops ag71xx_netdev_ops = { ++ .ndo_open = ag71xx_open, ++ .ndo_stop = ag71xx_stop, ++ .ndo_start_xmit = ag71xx_hard_start_xmit, ++ .ndo_set_multicast_list = ag71xx_set_multicast_list, ++ .ndo_do_ioctl = ag71xx_do_ioctl, ++ .ndo_tx_timeout = ag71xx_tx_timeout, ++ .ndo_change_mtu = eth_change_mtu, ++ .ndo_set_mac_address = eth_mac_addr, ++ .ndo_validate_addr = eth_validate_addr, ++#ifdef CONFIG_NET_POLL_CONTROLLER ++ .ndo_poll_controller = ag71xx_netpoll, ++#endif ++}; ++ ++static int __devinit ag71xx_probe(struct platform_device *pdev) ++{ ++ struct net_device *dev; ++ struct resource *res; ++ struct ag71xx *ag; ++ struct ag71xx_platform_data *pdata; ++ int err; ++ ++ pdata = pdev->dev.platform_data; ++ if (!pdata) { ++ dev_err(&pdev->dev, "no platform data specified\n"); ++ err = -ENXIO; ++ goto err_out; ++ } ++ ++ if (pdata->mii_bus_dev == NULL) { ++ dev_err(&pdev->dev, "no MII bus device specified\n"); ++ err = -EINVAL; ++ goto err_out; ++ } ++ ++ dev = alloc_etherdev(sizeof(*ag)); ++ if (!dev) { ++ dev_err(&pdev->dev, "alloc_etherdev failed\n"); ++ err = -ENOMEM; ++ goto err_out; ++ } ++ ++ SET_NETDEV_DEV(dev, &pdev->dev); ++ ++ ag = netdev_priv(dev); ++ ag->pdev = pdev; ++ ag->dev = dev; ++ ag->msg_enable = netif_msg_init(ag71xx_msg_level, ++ AG71XX_DEFAULT_MSG_ENABLE); ++ spin_lock_init(&ag->lock); ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base"); ++ if (!res) { ++ dev_err(&pdev->dev, "no mac_base resource found\n"); ++ err = -ENXIO; ++ goto err_out; ++ } ++ ++ ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1); ++ if (!ag->mac_base) { ++ dev_err(&pdev->dev, "unable to ioremap mac_base\n"); ++ err = -ENOMEM; ++ goto err_free_dev; ++ } ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mii_ctrl"); ++ if (!res) { ++ dev_err(&pdev->dev, "no mii_ctrl resource found\n"); ++ err = -ENXIO; ++ goto err_unmap_base; ++ } ++ ++ ag->mii_ctrl = ioremap_nocache(res->start, res->end - res->start + 1); ++ if (!ag->mii_ctrl) { ++ dev_err(&pdev->dev, "unable to ioremap mii_ctrl\n"); ++ err = -ENOMEM; ++ goto err_unmap_base; ++ } ++ ++ dev->irq = platform_get_irq(pdev, 0); ++ err = request_irq(dev->irq, ag71xx_interrupt, ++ IRQF_DISABLED, ++ dev->name, dev); ++ if (err) { ++ dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq); ++ goto err_unmap_mii_ctrl; ++ } ++ ++ dev->base_addr = (unsigned long)ag->mac_base; ++ dev->netdev_ops = &ag71xx_netdev_ops; ++ dev->ethtool_ops = &ag71xx_ethtool_ops; ++ ++ INIT_WORK(&ag->restart_work, ag71xx_restart_work_func); ++ ++ init_timer(&ag->oom_timer); ++ ag->oom_timer.data = (unsigned long) dev; ++ ag->oom_timer.function = ag71xx_oom_timer_handler; ++ ++ ag->tx_ring.size = AG71XX_TX_RING_SIZE_DEFAULT; ++ ag->rx_ring.size = AG71XX_RX_RING_SIZE_DEFAULT; ++ ++ ag->stop_desc = dma_alloc_coherent(NULL, ++ sizeof(struct ag71xx_desc), &ag->stop_desc_dma, GFP_KERNEL); ++ ++ if (!ag->stop_desc) ++ goto err_free_irq; ++ ++ ag->stop_desc->data = 0; ++ ag->stop_desc->ctrl = 0; ++ ag->stop_desc->next = (u32) ag->stop_desc_dma; ++ ++ memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN); ++ ++ netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT); ++ ++ err = register_netdev(dev); ++ if (err) { ++ dev_err(&pdev->dev, "unable to register net device\n"); ++ goto err_free_desc; ++ } ++ ++ printk(KERN_INFO "%s: Atheros AG71xx at 0x%08lx, irq %d\n", ++ dev->name, dev->base_addr, dev->irq); ++ ++ ag71xx_dump_regs(ag); ++ ++ ag71xx_hw_init(ag); ++ ++ ag71xx_dump_regs(ag); ++ ++ err = ag71xx_phy_connect(ag); ++ if (err) ++ goto err_unregister_netdev; ++ ++ err = ag71xx_debugfs_init(ag); ++ if (err) ++ goto err_phy_disconnect; ++ ++ platform_set_drvdata(pdev, dev); ++ ++ return 0; ++ ++err_phy_disconnect: ++ ag71xx_phy_disconnect(ag); ++err_unregister_netdev: ++ unregister_netdev(dev); ++err_free_desc: ++ dma_free_coherent(NULL, sizeof(struct ag71xx_desc), ag->stop_desc, ++ ag->stop_desc_dma); ++err_free_irq: ++ free_irq(dev->irq, dev); ++err_unmap_mii_ctrl: ++ iounmap(ag->mii_ctrl); ++err_unmap_base: ++ iounmap(ag->mac_base); ++err_free_dev: ++ kfree(dev); ++err_out: ++ platform_set_drvdata(pdev, NULL); ++ return err; ++} ++ ++static int __devexit ag71xx_remove(struct platform_device *pdev) ++{ ++ struct net_device *dev = platform_get_drvdata(pdev); ++ ++ if (dev) { ++ struct ag71xx *ag = netdev_priv(dev); ++ ++ ag71xx_debugfs_exit(ag); ++ ag71xx_phy_disconnect(ag); ++ unregister_netdev(dev); ++ free_irq(dev->irq, dev); ++ iounmap(ag->mii_ctrl); ++ iounmap(ag->mac_base); ++ kfree(dev); ++ platform_set_drvdata(pdev, NULL); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver ag71xx_driver = { ++ .probe = ag71xx_probe, ++ .remove = __exit_p(ag71xx_remove), ++ .driver = { ++ .name = AG71XX_DRV_NAME, ++ } ++}; ++ ++static int __init ag71xx_module_init(void) ++{ ++ int ret; ++ ++ ret = ag71xx_debugfs_root_init(); ++ if (ret) ++ goto err_out; ++ ++ ret = ag71xx_mdio_driver_init(); ++ if (ret) ++ goto err_debugfs_exit; ++ ++ ret = platform_driver_register(&ag71xx_driver); ++ if (ret) ++ goto err_mdio_exit; ++ ++ return 0; ++ ++err_mdio_exit: ++ ag71xx_mdio_driver_exit(); ++err_debugfs_exit: ++ ag71xx_debugfs_root_exit(); ++err_out: ++ return ret; ++} ++ ++static void __exit ag71xx_module_exit(void) ++{ ++ platform_driver_unregister(&ag71xx_driver); ++ ag71xx_mdio_driver_exit(); ++ ag71xx_debugfs_root_exit(); ++} ++ ++module_init(ag71xx_module_init); ++module_exit(ag71xx_module_exit); ++ ++MODULE_VERSION(AG71XX_DRV_VERSION); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_AUTHOR("Imre Kaloz "); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:" AG71XX_DRV_NAME); +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_mdio.c linux-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c +--- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_mdio.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c 2011-04-27 12:19:22.257663952 +0200 +@@ -0,0 +1,248 @@ ++/* ++ * Atheros AR71xx built-in ethernet mac driver ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Based on Atheros' AG7100 driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include "ag71xx.h" ++ ++#define AG71XX_MDIO_RETRY 1000 ++#define AG71XX_MDIO_DELAY 5 ++ ++static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg, ++ u32 value) ++{ ++ void __iomem *r; ++ ++ r = am->mdio_base + reg; ++ __raw_writel(value, r); ++ ++ /* flush write */ ++ (void) __raw_readl(r); ++} ++ ++static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg) ++{ ++ return __raw_readl(am->mdio_base + reg); ++} ++ ++static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am) ++{ ++ DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n", ++ am->mii_bus->name, ++ ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG), ++ ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD), ++ ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR)); ++ DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n", ++ am->mii_bus->name, ++ ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL), ++ ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS), ++ ag71xx_mdio_rr(am, AG71XX_REG_MII_IND)); ++} ++ ++int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg) ++{ ++ int ret; ++ int i; ++ ++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); ++ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, ++ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); ++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ); ++ ++ i = AG71XX_MDIO_RETRY; ++ while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) { ++ if (i-- == 0) { ++ printk(KERN_ERR "%s: mii_read timed out\n", ++ am->mii_bus->name); ++ ret = 0xffff; ++ goto out; ++ } ++ udelay(AG71XX_MDIO_DELAY); ++ } ++ ++ ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff; ++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE); ++ ++ DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret); ++ ++out: ++ return ret; ++} ++ ++void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val) ++{ ++ int i; ++ ++ DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val); ++ ++ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR, ++ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff)); ++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val); ++ ++ i = AG71XX_MDIO_RETRY; ++ while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) { ++ if (i-- == 0) { ++ printk(KERN_ERR "%s: mii_write timed out\n", ++ am->mii_bus->name); ++ break; ++ } ++ udelay(AG71XX_MDIO_DELAY); ++ } ++} ++ ++static int ag71xx_mdio_reset(struct mii_bus *bus) ++{ ++ struct ag71xx_mdio *am = bus->priv; ++ u32 t; ++ ++ if (am->pdata->is_ar7240) ++ t = MII_CFG_CLK_DIV_6; ++ else ++ t = MII_CFG_CLK_DIV_28; ++ ++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET); ++ udelay(100); ++ ++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t); ++ udelay(100); ++ ++ return 0; ++} ++ ++static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg) ++{ ++ struct ag71xx_mdio *am = bus->priv; ++ ++ if (am->pdata->is_ar7240) ++ return ar7240sw_phy_read(bus, addr, reg); ++ else ++ return ag71xx_mdio_mii_read(am, addr, reg); ++} ++ ++static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val) ++{ ++ struct ag71xx_mdio *am = bus->priv; ++ ++ if (am->pdata->is_ar7240) ++ ar7240sw_phy_write(bus, addr, reg, val); ++ else ++ ag71xx_mdio_mii_write(am, addr, reg, val); ++ return 0; ++} ++ ++static int __devinit ag71xx_mdio_probe(struct platform_device *pdev) ++{ ++ struct ag71xx_mdio_platform_data *pdata; ++ struct ag71xx_mdio *am; ++ struct resource *res; ++ int i; ++ int err; ++ ++ pdata = pdev->dev.platform_data; ++ if (!pdata) { ++ dev_err(&pdev->dev, "no platform data specified\n"); ++ return -EINVAL; ++ } ++ ++ am = kzalloc(sizeof(*am), GFP_KERNEL); ++ if (!am) { ++ err = -ENOMEM; ++ goto err_out; ++ } ++ ++ am->pdata = pdata; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(&pdev->dev, "no iomem resource found\n"); ++ err = -ENXIO; ++ goto err_out; ++ } ++ ++ am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1); ++ if (!am->mdio_base) { ++ dev_err(&pdev->dev, "unable to ioremap registers\n"); ++ err = -ENOMEM; ++ goto err_free_mdio; ++ } ++ ++ am->mii_bus = mdiobus_alloc(); ++ if (am->mii_bus == NULL) { ++ err = -ENOMEM; ++ goto err_iounmap; ++ } ++ ++ am->mii_bus->name = "ag71xx_mdio"; ++ am->mii_bus->read = ag71xx_mdio_read; ++ am->mii_bus->write = ag71xx_mdio_write; ++ am->mii_bus->reset = ag71xx_mdio_reset; ++ am->mii_bus->irq = am->mii_irq; ++ am->mii_bus->priv = am; ++ am->mii_bus->parent = &pdev->dev; ++ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev)); ++ am->mii_bus->phy_mask = pdata->phy_mask; ++ ++ for (i = 0; i < PHY_MAX_ADDR; i++) ++ am->mii_irq[i] = PHY_POLL; ++ ++ ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0); ++ ++ err = mdiobus_register(am->mii_bus); ++ if (err) ++ goto err_free_bus; ++ ++ ag71xx_mdio_dump_regs(am); ++ ++ platform_set_drvdata(pdev, am); ++ return 0; ++ ++err_free_bus: ++ mdiobus_free(am->mii_bus); ++err_iounmap: ++ iounmap(am->mdio_base); ++err_free_mdio: ++ kfree(am); ++err_out: ++ return err; ++} ++ ++static int __devexit ag71xx_mdio_remove(struct platform_device *pdev) ++{ ++ struct ag71xx_mdio *am = platform_get_drvdata(pdev); ++ ++ if (am) { ++ mdiobus_unregister(am->mii_bus); ++ mdiobus_free(am->mii_bus); ++ iounmap(am->mdio_base); ++ kfree(am); ++ platform_set_drvdata(pdev, NULL); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver ag71xx_mdio_driver = { ++ .probe = ag71xx_mdio_probe, ++ .remove = __exit_p(ag71xx_mdio_remove), ++ .driver = { ++ .name = "ag71xx-mdio", ++ } ++}; ++ ++int __init ag71xx_mdio_driver_init(void) ++{ ++ return platform_driver_register(&ag71xx_mdio_driver); ++} ++ ++void ag71xx_mdio_driver_exit(void) ++{ ++ platform_driver_unregister(&ag71xx_mdio_driver); ++} +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_phy.c linux-2.6.39/drivers/net/ag71xx/ag71xx_phy.c +--- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_phy.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_phy.c 2011-08-06 09:32:37.298018216 +0200 +@@ -0,0 +1,228 @@ ++/* ++ * Atheros AR71xx built-in ethernet mac driver ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Based on Atheros' AG7100 driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include "ag71xx.h" ++ ++static void ag71xx_phy_link_adjust(struct net_device *dev) ++{ ++ struct ag71xx *ag = netdev_priv(dev); ++ struct phy_device *phydev = ag->phy_dev; ++ unsigned long flags; ++ int status_change = 0; ++ ++ spin_lock_irqsave(&ag->lock, flags); ++ ++ if (phydev->link) { ++ if (ag->duplex != phydev->duplex ++ || ag->speed != phydev->speed) { ++ status_change = 1; ++ } ++ } ++ ++ if (phydev->link != ag->link) ++ status_change = 1; ++ ++ ag->link = phydev->link; ++ ag->duplex = phydev->duplex; ++ ag->speed = phydev->speed; ++ ++ if (status_change) ++ ag71xx_link_adjust(ag); ++ ++ spin_unlock_irqrestore(&ag->lock, flags); ++} ++ ++void ag71xx_phy_start(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ ++ if (ag->phy_dev) { ++ phy_start(ag->phy_dev); ++ } else if (pdata->has_ar7240_switch) { ++ ag71xx_ar7240_start(ag); ++ } else { ++ ag->link = 1; ++ ag71xx_link_adjust(ag); ++ } ++} ++ ++void ag71xx_phy_stop(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ ++ if (ag->phy_dev) { ++ phy_stop(ag->phy_dev); ++ } else { ++ if (pdata->has_ar7240_switch) ++ ag71xx_ar7240_stop(ag); ++ ag->link = 0; ++ ag71xx_link_adjust(ag); ++ } ++} ++ ++static int ag71xx_phy_connect_fixed(struct ag71xx *ag) ++{ ++ struct net_device *dev = ag->dev; ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ int ret = 0; ++ ++ /* use fixed settings */ ++ switch (pdata->speed) { ++ case SPEED_10: ++ case SPEED_100: ++ case SPEED_1000: ++ break; ++ default: ++ printk(KERN_ERR "%s: invalid speed specified\n", dev->name); ++ ret = -EINVAL; ++ break; ++ } ++ ++ printk(KERN_DEBUG "%s: using fixed link parameters\n", dev->name); ++ ++ ag->duplex = pdata->duplex; ++ ag->speed = pdata->speed; ++ ++ return ret; ++} ++ ++static int ag71xx_phy_connect_multi(struct ag71xx *ag) ++{ ++ struct net_device *dev = ag->dev; ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ struct phy_device *phydev = NULL; ++ int phy_addr; ++ int ret = 0; ++ ++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { ++ if (!(pdata->phy_mask & (1 << phy_addr))) ++ continue; ++ ++ if (ag->mii_bus->phy_map[phy_addr] == NULL) ++ continue; ++ ++ DBG("%s: PHY found at %s, uid=%08x\n", ++ dev->name, ++ dev_name(&ag->mii_bus->phy_map[phy_addr]->dev), ++ ag->mii_bus->phy_map[phy_addr]->phy_id); ++ ++ if (phydev == NULL) ++ phydev = ag->mii_bus->phy_map[phy_addr]; ++ } ++ ++ if (!phydev) { ++ printk(KERN_ERR "%s: no PHY found with phy_mask=%08x\n", ++ dev->name, pdata->phy_mask); ++ return -ENODEV; ++ } ++ ++ ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev), ++ &ag71xx_phy_link_adjust, 0, ++ pdata->phy_if_mode); ++ ++ if (IS_ERR(ag->phy_dev)) { ++ printk(KERN_ERR "%s: could not connect to PHY at %s\n", ++ dev->name, dev_name(&phydev->dev)); ++ return PTR_ERR(ag->phy_dev); ++ } ++ ++ /* mask with MAC supported features */ ++ if (pdata->has_gbit) ++ phydev->supported &= PHY_GBIT_FEATURES; ++ else ++ phydev->supported &= PHY_BASIC_FEATURES; ++ ++ phydev->advertising = phydev->supported; ++ ++ printk(KERN_DEBUG "%s: connected to PHY at %s [uid=%08x, driver=%s]\n", ++ dev->name, dev_name(&phydev->dev), ++ phydev->phy_id, phydev->drv->name); ++ ++ ag->link = 0; ++ ag->speed = 0; ++ ag->duplex = -1; ++ ++ return ret; ++} ++ ++static int dev_is_class(struct device *dev, void *class) ++{ ++ if (dev->class != NULL && !strcmp(dev->class->name, class)) ++ return 1; ++ ++ return 0; ++} ++ ++static struct device *dev_find_class(struct device *parent, char *class) ++{ ++ if (dev_is_class(parent, class)) { ++ get_device(parent); ++ return parent; ++ } ++ ++ return device_find_child(parent, class, dev_is_class); ++} ++ ++static struct mii_bus *dev_to_mii_bus(struct device *dev) ++{ ++ struct device *d; ++ ++ d = dev_find_class(dev, "mdio_bus"); ++ if (d != NULL) { ++ struct mii_bus *bus; ++ ++ bus = to_mii_bus(d); ++ put_device(d); ++ ++ return bus; ++ } ++ ++ return NULL; ++} ++ ++int __devinit ag71xx_phy_connect(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ ++ ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev); ++ if (ag->mii_bus == NULL) { ++ printk(KERN_ERR "%s: unable to find MII bus on device '%s'\n", ++ ag->dev->name, dev_name(pdata->mii_bus_dev)); ++ return -ENODEV; ++ } ++ ++ /* Reset the mdio bus explicitly */ ++ if (ag->mii_bus->reset) { ++ mutex_lock(&ag->mii_bus->mdio_lock); ++ ag->mii_bus->reset(ag->mii_bus); ++ mutex_unlock(&ag->mii_bus->mdio_lock); ++ } ++ ++ if (pdata->has_ar7240_switch) ++ return ag71xx_ar7240_init(ag); ++ ++ if (pdata->phy_mask) ++ return ag71xx_phy_connect_multi(ag); ++ ++ return ag71xx_phy_connect_fixed(ag); ++} ++ ++void ag71xx_phy_disconnect(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ ++ if (pdata->has_ar7240_switch) ++ ag71xx_ar7240_cleanup(ag); ++ else if (ag->phy_dev) ++ phy_disconnect(ag->phy_dev); ++} +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/Kconfig linux-2.6.39/drivers/net/ag71xx/Kconfig +--- linux-2.6.39.orig/drivers/net/ag71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/Kconfig 2011-04-27 12:19:22.247664026 +0200 +@@ -0,0 +1,33 @@ ++config AG71XX ++ tristate "Atheros AR71xx built-in ethernet mac support" ++ depends on ATHEROS_AR71XX ++ select PHYLIB ++ help ++ If you wish to compile a kernel for AR71xx/91xx and enable ++ ethernet support, then you should always answer Y to this. ++ ++if AG71XX ++ ++config AG71XX_DEBUG ++ bool "Atheros AR71xx built-in ethernet driver debugging" ++ default n ++ help ++ Atheros AR71xx built-in ethernet driver debugging messages. ++ ++config AG71XX_DEBUG_FS ++ bool "Atheros AR71xx built-in ethernet driver debugfs support" ++ depends on DEBUG_FS ++ default n ++ help ++ Say Y, if you need access to various statistics provided by ++ the ag71xx driver. ++ ++config AG71XX_AR8216_SUPPORT ++ bool "special support for the Atheros AR8216 switch" ++ default n ++ default y if AR71XX_MACH_WNR2000 || AR71XX_MACH_MZK_W04NU ++ help ++ Say 'y' here if you want to enable special support for the ++ Atheros AR8216 switch found on some boards. ++ ++endif +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/Makefile linux-2.6.39/drivers/net/ag71xx/Makefile +--- linux-2.6.39.orig/drivers/net/ag71xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/Makefile 2011-04-27 12:19:22.257663952 +0200 +@@ -0,0 +1,15 @@ ++# ++# Makefile for the Atheros AR71xx built-in ethernet macs ++# ++ ++ag71xx-y += ag71xx_main.o ++ag71xx-y += ag71xx_ethtool.o ++ag71xx-y += ag71xx_phy.o ++ag71xx-y += ag71xx_mdio.o ++ag71xx-y += ag71xx_ar7240.o ++ ++ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o ++ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o ++ ++obj-$(CONFIG_AG71XX) += ag71xx.o ++ +diff -Nur linux-2.6.39.orig/drivers/net/Kconfig linux-2.6.39/drivers/net/Kconfig +--- linux-2.6.39.orig/drivers/net/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/net/Kconfig 2011-08-22 16:21:54.787979739 +0200 +@@ -2071,6 +2071,8 @@ + + The safe and default value for this is N. + ++source drivers/net/ag71xx/Kconfig ++ + config DL2K + tristate "DL2000/TC902x-based Gigabit Ethernet support" + depends on PCI +diff -Nur linux-2.6.39.orig/drivers/net/Makefile linux-2.6.39/drivers/net/Makefile +--- linux-2.6.39.orig/drivers/net/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/net/Makefile 2011-08-22 16:21:54.797980120 +0200 +@@ -112,6 +112,7 @@ + # end link order section + # + ++obj-$(CONFIG_AG71XX) += ag71xx/ + obj-$(CONFIG_SUNDANCE) += sundance.o + obj-$(CONFIG_HAMACHI) += hamachi.o + obj-$(CONFIG_NET) += Space.o loopback.o +diff -Nur linux-2.6.39.orig/drivers/net/phy/Kconfig linux-2.6.39/drivers/net/phy/Kconfig +--- linux-2.6.39.orig/drivers/net/phy/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/net/phy/Kconfig 2011-08-22 22:19:34.339230055 +0200 +@@ -13,6 +13,12 @@ + + if PHYLIB + ++config SWCONFIG ++ tristate "Switch configuration API" ++ ---help--- ++ Switch configuration API using netlink. This allows ++ you to configure the VLAN features of certain switches. ++ + comment "MII PHY device drivers" + + config MARVELL_PHY +diff -Nur linux-2.6.39.orig/drivers/net/phy/Makefile linux-2.6.39/drivers/net/phy/Makefile +--- linux-2.6.39.orig/drivers/net/phy/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/net/phy/Makefile 2011-08-22 22:19:34.339230055 +0200 +@@ -3,6 +3,7 @@ + libphy-objs := phy.o phy_device.o mdio_bus.o + + obj-$(CONFIG_PHYLIB) += libphy.o ++obj-$(CONFIG_SWCONFIG) += swconfig.o + obj-$(CONFIG_MARVELL_PHY) += marvell.o + obj-$(CONFIG_DAVICOM_PHY) += davicom.o + obj-$(CONFIG_CICADA_PHY) += cicada.o +diff -Nur linux-2.6.39.orig/drivers/net/phy/micrel.c linux-2.6.39/drivers/net/phy/micrel.c +--- linux-2.6.39.orig/drivers/net/phy/micrel.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/net/phy/micrel.c 2011-04-27 12:19:22.257663952 +0200 +@@ -1,251 +1,82 @@ + /* +- * drivers/net/phy/micrel.c ++ * Driver for Micrel/Kendin PHYs + * +- * Driver for Micrel PHYs ++ * Copyright (c) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz + * +- * Author: David J. Choi ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. + * +- * Copyright (c) 2010 Micrel, Inc. +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License as published by the +- * Free Software Foundation; either version 2 of the License, or (at your +- * option) any later version. +- * +- * Support : ksz9021 1000/100/10 phy from Micrel +- * ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy + */ + +-#include +-#include ++#include ++#include + #include +-#include + +-/* general Interrupt control/status reg in vendor specific block. */ +-#define MII_KSZPHY_INTCS 0x1B +-#define KSZPHY_INTCS_JABBER (1 << 15) +-#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14) +-#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13) +-#define KSZPHY_INTCS_PARELLEL (1 << 12) +-#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11) +-#define KSZPHY_INTCS_LINK_DOWN (1 << 10) +-#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9) +-#define KSZPHY_INTCS_LINK_UP (1 << 8) +-#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\ +- KSZPHY_INTCS_LINK_DOWN) +- +-/* general PHY control reg in vendor specific block. */ +-#define MII_KSZPHY_CTRL 0x1F +-/* bitmap of PHY register to set interrupt mode */ +-#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9) +-#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14) +-#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14) +-#define KSZ8051_RMII_50MHZ_CLK (1 << 7) ++#define KSZ_REG_INT_CTRL 0x1b + +-static int kszphy_ack_interrupt(struct phy_device *phydev) +-{ +- /* bit[7..0] int status, which is a read and clear register. */ +- int rc; ++#define KSZ_INT_LU_EN (1 << 8) /* enable Link Up interrupt */ ++#define KSZ_INT_RF_EN (1 << 9) /* enable Remote Fault interrupt */ ++#define KSZ_INT_LD_EN (1 << 10) /* enable Link Down interrupt */ + +- rc = phy_read(phydev, MII_KSZPHY_INTCS); +- +- return (rc < 0) ? rc : 0; +-} ++#define KSZ_INT_INIT (KSZ_INT_LU_EN | KSZ_INT_LD_EN) + +-static int kszphy_set_interrupt(struct phy_device *phydev) ++static int ksz8041_ack_interrupt(struct phy_device *phydev) + { +- int temp; +- temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ? +- KSZPHY_INTCS_ALL : 0; +- return phy_write(phydev, MII_KSZPHY_INTCS, temp); +-} ++ int err; + +-static int kszphy_config_intr(struct phy_device *phydev) +-{ +- int temp, rc; ++ err = phy_read(phydev, KSZ_REG_INT_CTRL); + +- /* set the interrupt pin active low */ +- temp = phy_read(phydev, MII_KSZPHY_CTRL); +- temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH; +- phy_write(phydev, MII_KSZPHY_CTRL, temp); +- rc = kszphy_set_interrupt(phydev); +- return rc < 0 ? rc : 0; ++ return (err < 0) ? err : 0; + } + +-static int ksz9021_config_intr(struct phy_device *phydev) ++static int ksz8041_config_intr(struct phy_device *phydev) + { +- int temp, rc; ++ int err; + +- /* set the interrupt pin active low */ +- temp = phy_read(phydev, MII_KSZPHY_CTRL); +- temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH; +- phy_write(phydev, MII_KSZPHY_CTRL, temp); +- rc = kszphy_set_interrupt(phydev); +- return rc < 0 ? rc : 0; +-} +- +-static int ks8737_config_intr(struct phy_device *phydev) +-{ +- int temp, rc; ++ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) ++ err = phy_write(phydev, KSZ_REG_INT_CTRL, ++ KSZ_INT_INIT); ++ else ++ err = phy_write(phydev, KSZ_REG_INT_CTRL, 0); + +- /* set the interrupt pin active low */ +- temp = phy_read(phydev, MII_KSZPHY_CTRL); +- temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH; +- phy_write(phydev, MII_KSZPHY_CTRL, temp); +- rc = kszphy_set_interrupt(phydev); +- return rc < 0 ? rc : 0; ++ return err; + } + +-static int kszphy_config_init(struct phy_device *phydev) +-{ +- return 0; +-} +- +-static int ks8051_config_init(struct phy_device *phydev) +-{ +- int regval; +- +- if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { +- regval = phy_read(phydev, MII_KSZPHY_CTRL); +- regval |= KSZ8051_RMII_50MHZ_CLK; +- phy_write(phydev, MII_KSZPHY_CTRL, regval); +- } +- +- return 0; +-} +- +-static struct phy_driver ks8737_driver = { +- .phy_id = PHY_ID_KS8737, +- .phy_id_mask = 0x00fffff0, +- .name = "Micrel KS8737", +- .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), +- .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, +- .config_init = kszphy_config_init, ++static struct phy_driver ksz8041_phy_driver = { ++ .phy_id = 0x00221512, ++ .name = "Micrel KSZ8041", ++ .phy_id_mask = 0x001fffff, ++ .features = PHY_BASIC_FEATURES, ++ .flags = PHY_HAS_INTERRUPT, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, +- .ack_interrupt = kszphy_ack_interrupt, +- .config_intr = ks8737_config_intr, +- .driver = { .owner = THIS_MODULE,}, ++ .ack_interrupt = ksz8041_ack_interrupt, ++ .config_intr = ksz8041_config_intr, ++ .driver = { ++ .owner = THIS_MODULE, ++ }, + }; + +-static struct phy_driver ks8041_driver = { +- .phy_id = PHY_ID_KS8041, +- .phy_id_mask = 0x00fffff0, +- .name = "Micrel KS8041", +- .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause +- | SUPPORTED_Asym_Pause), +- .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, +- .config_init = kszphy_config_init, +- .config_aneg = genphy_config_aneg, +- .read_status = genphy_read_status, +- .ack_interrupt = kszphy_ack_interrupt, +- .config_intr = kszphy_config_intr, +- .driver = { .owner = THIS_MODULE,}, +-}; +- +-static struct phy_driver ks8051_driver = { +- .phy_id = PHY_ID_KS8051, +- .phy_id_mask = 0x00fffff0, +- .name = "Micrel KS8051", +- .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause +- | SUPPORTED_Asym_Pause), +- .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, +- .config_init = ks8051_config_init, +- .config_aneg = genphy_config_aneg, +- .read_status = genphy_read_status, +- .ack_interrupt = kszphy_ack_interrupt, +- .config_intr = kszphy_config_intr, +- .driver = { .owner = THIS_MODULE,}, +-}; +- +-static struct phy_driver ks8001_driver = { +- .phy_id = PHY_ID_KS8001, +- .name = "Micrel KS8001 or KS8721", +- .phy_id_mask = 0x00fffff0, +- .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), +- .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, +- .config_init = kszphy_config_init, +- .config_aneg = genphy_config_aneg, +- .read_status = genphy_read_status, +- .ack_interrupt = kszphy_ack_interrupt, +- .config_intr = kszphy_config_intr, +- .driver = { .owner = THIS_MODULE,}, +-}; +- +-static struct phy_driver ksz9021_driver = { +- .phy_id = PHY_ID_KSZ9021, +- .phy_id_mask = 0x000fff10, +- .name = "Micrel KSZ9021 Gigabit PHY", +- .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause +- | SUPPORTED_Asym_Pause), +- .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, +- .config_init = kszphy_config_init, +- .config_aneg = genphy_config_aneg, +- .read_status = genphy_read_status, +- .ack_interrupt = kszphy_ack_interrupt, +- .config_intr = ksz9021_config_intr, +- .driver = { .owner = THIS_MODULE, }, +-}; +- +-static int __init ksphy_init(void) ++static int __init micrel_phy_init(void) + { +- int ret; +- +- ret = phy_driver_register(&ks8001_driver); +- if (ret) +- goto err1; +- +- ret = phy_driver_register(&ksz9021_driver); +- if (ret) +- goto err2; +- +- ret = phy_driver_register(&ks8737_driver); +- if (ret) +- goto err3; +- ret = phy_driver_register(&ks8041_driver); +- if (ret) +- goto err4; +- ret = phy_driver_register(&ks8051_driver); +- if (ret) +- goto err5; +- +- return 0; +- +-err5: +- phy_driver_unregister(&ks8041_driver); +-err4: +- phy_driver_unregister(&ks8737_driver); +-err3: +- phy_driver_unregister(&ksz9021_driver); +-err2: +- phy_driver_unregister(&ks8001_driver); +-err1: +- return ret; ++ return phy_driver_register(&ksz8041_phy_driver); + } + +-static void __exit ksphy_exit(void) ++static void __exit micrel_phy_exit(void) + { +- phy_driver_unregister(&ks8001_driver); +- phy_driver_unregister(&ks8737_driver); +- phy_driver_unregister(&ksz9021_driver); +- phy_driver_unregister(&ks8041_driver); +- phy_driver_unregister(&ks8051_driver); ++ phy_driver_unregister(&ksz8041_phy_driver); + } + +-module_init(ksphy_init); +-module_exit(ksphy_exit); +- +-MODULE_DESCRIPTION("Micrel PHY driver"); +-MODULE_AUTHOR("David J. Choi"); +-MODULE_LICENSE("GPL"); +- +-static struct mdio_device_id __maybe_unused micrel_tbl[] = { +- { PHY_ID_KSZ9021, 0x000fff10 }, +- { PHY_ID_KS8001, 0x00fffff0 }, +- { PHY_ID_KS8737, 0x00fffff0 }, +- { PHY_ID_KS8041, 0x00fffff0 }, +- { PHY_ID_KS8051, 0x00fffff0 }, +- { } +-}; ++#ifdef MODULE ++module_init(micrel_phy_init); ++module_exit(micrel_phy_exit); ++#else ++subsys_initcall(micrel_phy_init); ++#endif + +-MODULE_DEVICE_TABLE(mdio, micrel_tbl); ++MODULE_DESCRIPTION("Micrel/Kendin PHY driver"); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_AUTHOR("Imre Kaloz "); ++MODULE_LICENSE("GPL v2"); +diff -Nur linux-2.6.39.orig/drivers/net/phy/phy.c linux-2.6.39/drivers/net/phy/phy.c +--- linux-2.6.39.orig/drivers/net/phy/phy.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/net/phy/phy.c 2011-08-22 22:00:02.067980292 +0200 +@@ -297,6 +297,50 @@ + } + EXPORT_SYMBOL(phy_ethtool_gset); + ++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr) ++{ ++ u32 cmd; ++ int tmp; ++ struct ethtool_cmd ecmd = { ETHTOOL_GSET }; ++ struct ethtool_value edata = { ETHTOOL_GLINK }; ++ ++ if (get_user(cmd, (u32 *) useraddr)) ++ return -EFAULT; ++ ++ switch (cmd) { ++ case ETHTOOL_GSET: ++ phy_ethtool_gset(phydev, &ecmd); ++ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd))) ++ return -EFAULT; ++ return 0; ++ ++ case ETHTOOL_SSET: ++ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd))) ++ return -EFAULT; ++ return phy_ethtool_sset(phydev, &ecmd); ++ ++ case ETHTOOL_NWAY_RST: ++ /* if autoneg is off, it's an error */ ++ tmp = phy_read(phydev, MII_BMCR); ++ if (tmp & BMCR_ANENABLE) { ++ tmp |= (BMCR_ANRESTART); ++ phy_write(phydev, MII_BMCR, tmp); ++ return 0; ++ } ++ return -EINVAL; ++ ++ case ETHTOOL_GLINK: ++ edata.data = (phy_read(phydev, ++ MII_BMSR) & BMSR_LSTATUS) ? 1 : 0; ++ if (copy_to_user(useraddr, &edata, sizeof(edata))) ++ return -EFAULT; ++ return 0; ++ } ++ ++ return -EOPNOTSUPP; ++} ++EXPORT_SYMBOL(phy_ethtool_ioctl); ++ + /** + * phy_mii_ioctl - generic PHY MII ioctl interface + * @phydev: the phy_device struct +@@ -472,7 +516,7 @@ + int idx; + + idx = phy_find_setting(phydev->speed, phydev->duplex); +- ++ + idx++; + + idx = phy_find_valid(idx, phydev->supported); +diff -Nur linux-2.6.39.orig/drivers/net/phy/phy_device.c linux-2.6.39/drivers/net/phy/phy_device.c +--- linux-2.6.39.orig/drivers/net/phy/phy_device.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/net/phy/phy_device.c 2011-08-22 22:00:06.817981347 +0200 +@@ -149,6 +149,18 @@ + } + EXPORT_SYMBOL(phy_scan_fixups); + ++static int generic_receive_skb(struct sk_buff *skb) ++{ ++ skb->protocol = eth_type_trans(skb, skb->dev); ++ return netif_receive_skb(skb); ++} ++ ++static int generic_rx(struct sk_buff *skb) ++{ ++ skb->protocol = eth_type_trans(skb, skb->dev); ++ return netif_rx(skb); ++} ++ + static struct phy_device* phy_device_create(struct mii_bus *bus, + int addr, int phy_id) + { +@@ -180,6 +192,8 @@ + dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr); + + dev->state = PHY_DOWN; ++ dev->netif_receive_skb = &generic_receive_skb; ++ dev->netif_rx = &generic_rx; + + mutex_init(&dev->lock); + INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); +diff -Nur linux-2.6.39.orig/drivers/net/phy/swconfig.c linux-2.6.39/drivers/net/phy/swconfig.c +--- linux-2.6.39.orig/drivers/net/phy/swconfig.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/phy/swconfig.c 2011-08-22 22:18:58.887990974 +0200 +@@ -0,0 +1,954 @@ ++/* ++ * swconfig.c: Switch configuration API ++ * ++ * Copyright (C) 2008 Felix Fietkau ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++//#define DEBUG 1 ++#ifdef DEBUG ++#define DPRINTF(format, ...) printk("%s: " format, __func__, ##__VA_ARGS__) ++#else ++#define DPRINTF(...) do {} while(0) ++#endif ++ ++#define SWCONFIG_DEVNAME "switch%d" ++ ++MODULE_AUTHOR("Felix Fietkau "); ++MODULE_LICENSE("GPL"); ++ ++static int swdev_id = 0; ++static struct list_head swdevs; ++static DEFINE_SPINLOCK(swdevs_lock); ++struct swconfig_callback; ++ ++struct swconfig_callback ++{ ++ struct sk_buff *msg; ++ struct genlmsghdr *hdr; ++ struct genl_info *info; ++ int cmd; ++ ++ /* callback for filling in the message data */ ++ int (*fill)(struct swconfig_callback *cb, void *arg); ++ ++ /* callback for closing the message before sending it */ ++ int (*close)(struct swconfig_callback *cb, void *arg); ++ ++ struct nlattr *nest[4]; ++ int args[4]; ++}; ++ ++/* defaults */ ++ ++static int ++swconfig_get_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ int ret; ++ if (val->port_vlan >= dev->vlans) ++ return -EINVAL; ++ ++ if (!dev->ops->get_vlan_ports) ++ return -EOPNOTSUPP; ++ ++ ret = dev->ops->get_vlan_ports(dev, val); ++ return ret; ++} ++ ++static int ++swconfig_set_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ struct switch_port *ports = val->value.ports; ++ const struct switch_dev_ops *ops = dev->ops; ++ int i; ++ ++ if (val->port_vlan >= dev->vlans) ++ return -EINVAL; ++ ++ /* validate ports */ ++ if (val->len > dev->ports) ++ return -EINVAL; ++ ++ if (!ops->set_vlan_ports) ++ return -EOPNOTSUPP; ++ ++ for (i = 0; i < val->len; i++) { ++ if (ports[i].id >= dev->ports) ++ return -EINVAL; ++ ++ if (ops->set_port_pvid && ++ !(ports[i].flags & (1 << SWITCH_PORT_FLAG_TAGGED))) ++ ops->set_port_pvid(dev, ports[i].id, val->port_vlan); ++ } ++ ++ return ops->set_vlan_ports(dev, val); ++} ++ ++static int ++swconfig_set_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ if (val->port_vlan >= dev->ports) ++ return -EINVAL; ++ ++ if (!dev->ops->set_port_pvid) ++ return -EOPNOTSUPP; ++ ++ return dev->ops->set_port_pvid(dev, val->port_vlan, val->value.i); ++} ++ ++static int ++swconfig_get_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ if (val->port_vlan >= dev->ports) ++ return -EINVAL; ++ ++ if (!dev->ops->get_port_pvid) ++ return -EOPNOTSUPP; ++ ++ return dev->ops->get_port_pvid(dev, val->port_vlan, &val->value.i); ++} ++ ++static int ++swconfig_apply_config(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ /* don't complain if not supported by the switch driver */ ++ if (!dev->ops->apply_config) ++ return 0; ++ ++ return dev->ops->apply_config(dev); ++} ++ ++static int ++swconfig_reset_switch(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ /* don't complain if not supported by the switch driver */ ++ if (!dev->ops->reset_switch) ++ return 0; ++ ++ return dev->ops->reset_switch(dev); ++} ++ ++enum global_defaults { ++ GLOBAL_APPLY, ++ GLOBAL_RESET, ++}; ++ ++enum vlan_defaults { ++ VLAN_PORTS, ++}; ++ ++enum port_defaults { ++ PORT_PVID, ++}; ++ ++static struct switch_attr default_global[] = { ++ [GLOBAL_APPLY] = { ++ .type = SWITCH_TYPE_NOVAL, ++ .name = "apply", ++ .description = "Activate changes in the hardware", ++ .set = swconfig_apply_config, ++ }, ++ [GLOBAL_RESET] = { ++ .type = SWITCH_TYPE_NOVAL, ++ .name = "reset", ++ .description = "Reset the switch", ++ .set = swconfig_reset_switch, ++ } ++}; ++ ++static struct switch_attr default_port[] = { ++ [PORT_PVID] = { ++ .type = SWITCH_TYPE_INT, ++ .name = "pvid", ++ .description = "Primary VLAN ID", ++ .set = swconfig_set_pvid, ++ .get = swconfig_get_pvid, ++ } ++}; ++ ++static struct switch_attr default_vlan[] = { ++ [VLAN_PORTS] = { ++ .type = SWITCH_TYPE_PORTS, ++ .name = "ports", ++ .description = "VLAN port mapping", ++ .set = swconfig_set_vlan_ports, ++ .get = swconfig_get_vlan_ports, ++ }, ++}; ++ ++ ++static void swconfig_defaults_init(struct switch_dev *dev) ++{ ++ const struct switch_dev_ops *ops = dev->ops; ++ ++ dev->def_global = 0; ++ dev->def_vlan = 0; ++ dev->def_port = 0; ++ ++ if (ops->get_vlan_ports || ops->set_vlan_ports) ++ set_bit(VLAN_PORTS, &dev->def_vlan); ++ ++ if (ops->get_port_pvid || ops->set_port_pvid) ++ set_bit(PORT_PVID, &dev->def_port); ++ ++ /* always present, can be no-op */ ++ set_bit(GLOBAL_APPLY, &dev->def_global); ++ set_bit(GLOBAL_RESET, &dev->def_global); ++} ++ ++ ++static struct genl_family switch_fam = { ++ .id = GENL_ID_GENERATE, ++ .name = "switch", ++ .hdrsize = 0, ++ .version = 1, ++ .maxattr = SWITCH_ATTR_MAX, ++}; ++ ++static const struct nla_policy switch_policy[SWITCH_ATTR_MAX+1] = { ++ [SWITCH_ATTR_ID] = { .type = NLA_U32 }, ++ [SWITCH_ATTR_OP_ID] = { .type = NLA_U32 }, ++ [SWITCH_ATTR_OP_PORT] = { .type = NLA_U32 }, ++ [SWITCH_ATTR_OP_VLAN] = { .type = NLA_U32 }, ++ [SWITCH_ATTR_OP_VALUE_INT] = { .type = NLA_U32 }, ++ [SWITCH_ATTR_OP_VALUE_STR] = { .type = NLA_NUL_STRING }, ++ [SWITCH_ATTR_OP_VALUE_PORTS] = { .type = NLA_NESTED }, ++ [SWITCH_ATTR_TYPE] = { .type = NLA_U32 }, ++}; ++ ++static const struct nla_policy port_policy[SWITCH_PORT_ATTR_MAX+1] = { ++ [SWITCH_PORT_ID] = { .type = NLA_U32 }, ++ [SWITCH_PORT_FLAG_TAGGED] = { .type = NLA_FLAG }, ++}; ++ ++static inline void ++swconfig_lock(void) ++{ ++ spin_lock(&swdevs_lock); ++} ++ ++static inline void ++swconfig_unlock(void) ++{ ++ spin_unlock(&swdevs_lock); ++} ++ ++static struct switch_dev * ++swconfig_get_dev(struct genl_info *info) ++{ ++ struct switch_dev *dev = NULL; ++ struct switch_dev *p; ++ int id; ++ ++ if (!info->attrs[SWITCH_ATTR_ID]) ++ goto done; ++ ++ id = nla_get_u32(info->attrs[SWITCH_ATTR_ID]); ++ swconfig_lock(); ++ list_for_each_entry(p, &swdevs, dev_list) { ++ if (id != p->id) ++ continue; ++ ++ dev = p; ++ break; ++ } ++ if (dev) ++ spin_lock(&dev->lock); ++ else ++ DPRINTF("device %d not found\n", id); ++ swconfig_unlock(); ++done: ++ return dev; ++} ++ ++static inline void ++swconfig_put_dev(struct switch_dev *dev) ++{ ++ spin_unlock(&dev->lock); ++} ++ ++static int ++swconfig_dump_attr(struct swconfig_callback *cb, void *arg) ++{ ++ struct switch_attr *op = arg; ++ struct genl_info *info = cb->info; ++ struct sk_buff *msg = cb->msg; ++ int id = cb->args[0]; ++ void *hdr; ++ ++ hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &switch_fam, ++ NLM_F_MULTI, SWITCH_CMD_NEW_ATTR); ++ if (IS_ERR(hdr)) ++ return -1; ++ ++ NLA_PUT_U32(msg, SWITCH_ATTR_OP_ID, id); ++ NLA_PUT_U32(msg, SWITCH_ATTR_OP_TYPE, op->type); ++ NLA_PUT_STRING(msg, SWITCH_ATTR_OP_NAME, op->name); ++ if (op->description) ++ NLA_PUT_STRING(msg, SWITCH_ATTR_OP_DESCRIPTION, ++ op->description); ++ ++ return genlmsg_end(msg, hdr); ++nla_put_failure: ++ genlmsg_cancel(msg, hdr); ++ return -EMSGSIZE; ++} ++ ++/* spread multipart messages across multiple message buffers */ ++static int ++swconfig_send_multipart(struct swconfig_callback *cb, void *arg) ++{ ++ struct genl_info *info = cb->info; ++ int restart = 0; ++ int err; ++ ++ do { ++ if (!cb->msg) { ++ cb->msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); ++ if (cb->msg == NULL) ++ goto error; ++ } ++ ++ if (!(cb->fill(cb, arg) < 0)) ++ break; ++ ++ /* fill failed, check if this was already the second attempt */ ++ if (restart) ++ goto error; ++ ++ /* try again in a new message, send the current one */ ++ restart = 1; ++ if (cb->close) { ++ if (cb->close(cb, arg) < 0) ++ goto error; ++ } ++ err = genlmsg_reply(cb->msg, info); ++ cb->msg = NULL; ++ if (err < 0) ++ goto error; ++ ++ } while (restart); ++ ++ return 0; ++ ++error: ++ if (cb->msg) ++ nlmsg_free(cb->msg); ++ return -1; ++} ++ ++static int ++swconfig_list_attrs(struct sk_buff *skb, struct genl_info *info) ++{ ++ struct genlmsghdr *hdr = nlmsg_data(info->nlhdr); ++ const struct switch_attrlist *alist; ++ struct switch_dev *dev; ++ struct swconfig_callback cb; ++ int err = -EINVAL; ++ int i; ++ ++ /* defaults */ ++ struct switch_attr *def_list; ++ unsigned long *def_active; ++ int n_def; ++ ++ dev = swconfig_get_dev(info); ++ if (!dev) ++ return -EINVAL; ++ ++ switch(hdr->cmd) { ++ case SWITCH_CMD_LIST_GLOBAL: ++ alist = &dev->ops->attr_global; ++ def_list = default_global; ++ def_active = &dev->def_global; ++ n_def = ARRAY_SIZE(default_global); ++ break; ++ case SWITCH_CMD_LIST_VLAN: ++ alist = &dev->ops->attr_vlan; ++ def_list = default_vlan; ++ def_active = &dev->def_vlan; ++ n_def = ARRAY_SIZE(default_vlan); ++ break; ++ case SWITCH_CMD_LIST_PORT: ++ alist = &dev->ops->attr_port; ++ def_list = default_port; ++ def_active = &dev->def_port; ++ n_def = ARRAY_SIZE(default_port); ++ break; ++ default: ++ WARN_ON(1); ++ goto out; ++ } ++ ++ memset(&cb, 0, sizeof(cb)); ++ cb.info = info; ++ cb.fill = swconfig_dump_attr; ++ for (i = 0; i < alist->n_attr; i++) { ++ if (alist->attr[i].disabled) ++ continue; ++ cb.args[0] = i; ++ err = swconfig_send_multipart(&cb, (void *) &alist->attr[i]); ++ if (err < 0) ++ goto error; ++ } ++ ++ /* defaults */ ++ for (i = 0; i < n_def; i++) { ++ if (!test_bit(i, def_active)) ++ continue; ++ cb.args[0] = SWITCH_ATTR_DEFAULTS_OFFSET + i; ++ err = swconfig_send_multipart(&cb, (void *) &def_list[i]); ++ if (err < 0) ++ goto error; ++ } ++ swconfig_put_dev(dev); ++ ++ if (!cb.msg) ++ return 0; ++ ++ return genlmsg_reply(cb.msg, info); ++ ++error: ++ if (cb.msg) ++ nlmsg_free(cb.msg); ++out: ++ swconfig_put_dev(dev); ++ return err; ++} ++ ++static const struct switch_attr * ++swconfig_lookup_attr(struct switch_dev *dev, struct genl_info *info, ++ struct switch_val *val) ++{ ++ struct genlmsghdr *hdr = nlmsg_data(info->nlhdr); ++ const struct switch_attrlist *alist; ++ const struct switch_attr *attr = NULL; ++ int attr_id; ++ ++ /* defaults */ ++ struct switch_attr *def_list; ++ unsigned long *def_active; ++ int n_def; ++ ++ if (!info->attrs[SWITCH_ATTR_OP_ID]) ++ goto done; ++ ++ switch(hdr->cmd) { ++ case SWITCH_CMD_SET_GLOBAL: ++ case SWITCH_CMD_GET_GLOBAL: ++ alist = &dev->ops->attr_global; ++ def_list = default_global; ++ def_active = &dev->def_global; ++ n_def = ARRAY_SIZE(default_global); ++ break; ++ case SWITCH_CMD_SET_VLAN: ++ case SWITCH_CMD_GET_VLAN: ++ alist = &dev->ops->attr_vlan; ++ def_list = default_vlan; ++ def_active = &dev->def_vlan; ++ n_def = ARRAY_SIZE(default_vlan); ++ if (!info->attrs[SWITCH_ATTR_OP_VLAN]) ++ goto done; ++ val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_VLAN]); ++ if (val->port_vlan >= dev->vlans) ++ goto done; ++ break; ++ case SWITCH_CMD_SET_PORT: ++ case SWITCH_CMD_GET_PORT: ++ alist = &dev->ops->attr_port; ++ def_list = default_port; ++ def_active = &dev->def_port; ++ n_def = ARRAY_SIZE(default_port); ++ if (!info->attrs[SWITCH_ATTR_OP_PORT]) ++ goto done; ++ val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_PORT]); ++ if (val->port_vlan >= dev->ports) ++ goto done; ++ break; ++ default: ++ WARN_ON(1); ++ goto done; ++ } ++ ++ if (!alist) ++ goto done; ++ ++ attr_id = nla_get_u32(info->attrs[SWITCH_ATTR_OP_ID]); ++ if (attr_id >= SWITCH_ATTR_DEFAULTS_OFFSET) { ++ attr_id -= SWITCH_ATTR_DEFAULTS_OFFSET; ++ if (attr_id >= n_def) ++ goto done; ++ if (!test_bit(attr_id, def_active)) ++ goto done; ++ attr = &def_list[attr_id]; ++ } else { ++ if (attr_id >= alist->n_attr) ++ goto done; ++ attr = &alist->attr[attr_id]; ++ } ++ ++ if (attr->disabled) ++ attr = NULL; ++ ++done: ++ if (!attr) ++ DPRINTF("attribute lookup failed\n"); ++ val->attr = attr; ++ return attr; ++} ++ ++static int ++swconfig_parse_ports(struct sk_buff *msg, struct nlattr *head, ++ struct switch_val *val, int max) ++{ ++ struct nlattr *nla; ++ int rem; ++ ++ val->len = 0; ++ nla_for_each_nested(nla, head, rem) { ++ struct nlattr *tb[SWITCH_PORT_ATTR_MAX+1]; ++ struct switch_port *port = &val->value.ports[val->len]; ++ ++ if (val->len >= max) ++ return -EINVAL; ++ ++ if (nla_parse_nested(tb, SWITCH_PORT_ATTR_MAX, nla, ++ port_policy)) ++ return -EINVAL; ++ ++ if (!tb[SWITCH_PORT_ID]) ++ return -EINVAL; ++ ++ port->id = nla_get_u32(tb[SWITCH_PORT_ID]); ++ if (tb[SWITCH_PORT_FLAG_TAGGED]) ++ port->flags |= (1 << SWITCH_PORT_FLAG_TAGGED); ++ val->len++; ++ } ++ ++ return 0; ++} ++ ++static int ++swconfig_set_attr(struct sk_buff *skb, struct genl_info *info) ++{ ++ const struct switch_attr *attr; ++ struct switch_dev *dev; ++ struct switch_val val; ++ int err = -EINVAL; ++ ++ dev = swconfig_get_dev(info); ++ if (!dev) ++ return -EINVAL; ++ ++ memset(&val, 0, sizeof(val)); ++ attr = swconfig_lookup_attr(dev, info, &val); ++ if (!attr || !attr->set) ++ goto error; ++ ++ val.attr = attr; ++ switch(attr->type) { ++ case SWITCH_TYPE_NOVAL: ++ break; ++ case SWITCH_TYPE_INT: ++ if (!info->attrs[SWITCH_ATTR_OP_VALUE_INT]) ++ goto error; ++ val.value.i = ++ nla_get_u32(info->attrs[SWITCH_ATTR_OP_VALUE_INT]); ++ break; ++ case SWITCH_TYPE_STRING: ++ if (!info->attrs[SWITCH_ATTR_OP_VALUE_STR]) ++ goto error; ++ val.value.s = ++ nla_data(info->attrs[SWITCH_ATTR_OP_VALUE_STR]); ++ break; ++ case SWITCH_TYPE_PORTS: ++ val.value.ports = dev->portbuf; ++ memset(dev->portbuf, 0, ++ sizeof(struct switch_port) * dev->ports); ++ ++ /* TODO: implement multipart? */ ++ if (info->attrs[SWITCH_ATTR_OP_VALUE_PORTS]) { ++ err = swconfig_parse_ports(skb, ++ info->attrs[SWITCH_ATTR_OP_VALUE_PORTS], &val, dev->ports); ++ if (err < 0) ++ goto error; ++ } else { ++ val.len = 0; ++ err = 0; ++ } ++ break; ++ default: ++ goto error; ++ } ++ ++ err = attr->set(dev, attr, &val); ++error: ++ swconfig_put_dev(dev); ++ return err; ++} ++ ++static int ++swconfig_close_portlist(struct swconfig_callback *cb, void *arg) ++{ ++ if (cb->nest[0]) ++ nla_nest_end(cb->msg, cb->nest[0]); ++ return 0; ++} ++ ++static int ++swconfig_send_port(struct swconfig_callback *cb, void *arg) ++{ ++ const struct switch_port *port = arg; ++ struct nlattr *p = NULL; ++ ++ if (!cb->nest[0]) { ++ cb->nest[0] = nla_nest_start(cb->msg, cb->cmd); ++ if (!cb->nest[0]) ++ return -1; ++ } ++ ++ p = nla_nest_start(cb->msg, SWITCH_ATTR_PORT); ++ if (!p) ++ goto error; ++ ++ NLA_PUT_U32(cb->msg, SWITCH_PORT_ID, port->id); ++ if (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) ++ NLA_PUT_FLAG(cb->msg, SWITCH_PORT_FLAG_TAGGED); ++ ++ nla_nest_end(cb->msg, p); ++ return 0; ++ ++nla_put_failure: ++ nla_nest_cancel(cb->msg, p); ++error: ++ nla_nest_cancel(cb->msg, cb->nest[0]); ++ return -1; ++} ++ ++static int ++swconfig_send_ports(struct sk_buff **msg, struct genl_info *info, int attr, ++ const struct switch_val *val) ++{ ++ struct swconfig_callback cb; ++ int err = 0; ++ int i; ++ ++ if (!val->value.ports) ++ return -EINVAL; ++ ++ memset(&cb, 0, sizeof(cb)); ++ cb.cmd = attr; ++ cb.msg = *msg; ++ cb.info = info; ++ cb.fill = swconfig_send_port; ++ cb.close = swconfig_close_portlist; ++ ++ cb.nest[0] = nla_nest_start(cb.msg, cb.cmd); ++ for (i = 0; i < val->len; i++) { ++ err = swconfig_send_multipart(&cb, &val->value.ports[i]); ++ if (err) ++ goto done; ++ } ++ err = val->len; ++ swconfig_close_portlist(&cb, NULL); ++ *msg = cb.msg; ++ ++done: ++ return err; ++} ++ ++static int ++swconfig_get_attr(struct sk_buff *skb, struct genl_info *info) ++{ ++ struct genlmsghdr *hdr = nlmsg_data(info->nlhdr); ++ const struct switch_attr *attr; ++ struct switch_dev *dev; ++ struct sk_buff *msg = NULL; ++ struct switch_val val; ++ int err = -EINVAL; ++ int cmd = hdr->cmd; ++ ++ dev = swconfig_get_dev(info); ++ if (!dev) ++ return -EINVAL; ++ ++ memset(&val, 0, sizeof(val)); ++ attr = swconfig_lookup_attr(dev, info, &val); ++ if (!attr || !attr->get) ++ goto error; ++ ++ if (attr->type == SWITCH_TYPE_PORTS) { ++ val.value.ports = dev->portbuf; ++ memset(dev->portbuf, 0, ++ sizeof(struct switch_port) * dev->ports); ++ } ++ ++ err = attr->get(dev, attr, &val); ++ if (err) ++ goto error; ++ ++ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); ++ if (!msg) ++ goto error; ++ ++ hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &switch_fam, ++ 0, cmd); ++ if (IS_ERR(hdr)) ++ goto nla_put_failure; ++ ++ switch(attr->type) { ++ case SWITCH_TYPE_INT: ++ NLA_PUT_U32(msg, SWITCH_ATTR_OP_VALUE_INT, val.value.i); ++ break; ++ case SWITCH_TYPE_STRING: ++ NLA_PUT_STRING(msg, SWITCH_ATTR_OP_VALUE_STR, val.value.s); ++ break; ++ case SWITCH_TYPE_PORTS: ++ err = swconfig_send_ports(&msg, info, ++ SWITCH_ATTR_OP_VALUE_PORTS, &val); ++ if (err < 0) ++ goto nla_put_failure; ++ break; ++ default: ++ DPRINTF("invalid type in attribute\n"); ++ err = -EINVAL; ++ goto error; ++ } ++ err = genlmsg_end(msg, hdr); ++ if (err < 0) ++ goto nla_put_failure; ++ ++ swconfig_put_dev(dev); ++ return genlmsg_reply(msg, info); ++ ++nla_put_failure: ++ if (msg) ++ nlmsg_free(msg); ++error: ++ swconfig_put_dev(dev); ++ if (!err) ++ err = -ENOMEM; ++ return err; ++} ++ ++static int ++swconfig_send_switch(struct sk_buff *msg, u32 pid, u32 seq, int flags, ++ const struct switch_dev *dev) ++{ ++ void *hdr; ++ ++ hdr = genlmsg_put(msg, pid, seq, &switch_fam, flags, ++ SWITCH_CMD_NEW_ATTR); ++ if (IS_ERR(hdr)) ++ return -1; ++ ++ NLA_PUT_U32(msg, SWITCH_ATTR_ID, dev->id); ++ NLA_PUT_STRING(msg, SWITCH_ATTR_DEV_NAME, dev->devname); ++ NLA_PUT_STRING(msg, SWITCH_ATTR_ALIAS, dev->alias); ++ NLA_PUT_STRING(msg, SWITCH_ATTR_NAME, dev->name); ++ NLA_PUT_U32(msg, SWITCH_ATTR_VLANS, dev->vlans); ++ NLA_PUT_U32(msg, SWITCH_ATTR_PORTS, dev->ports); ++ NLA_PUT_U32(msg, SWITCH_ATTR_CPU_PORT, dev->cpu_port); ++ ++ return genlmsg_end(msg, hdr); ++nla_put_failure: ++ genlmsg_cancel(msg, hdr); ++ return -EMSGSIZE; ++} ++ ++static int swconfig_dump_switches(struct sk_buff *skb, ++ struct netlink_callback *cb) ++{ ++ struct switch_dev *dev; ++ int start = cb->args[0]; ++ int idx = 0; ++ ++ swconfig_lock(); ++ list_for_each_entry(dev, &swdevs, dev_list) { ++ if (++idx <= start) ++ continue; ++ if (swconfig_send_switch(skb, NETLINK_CB(cb->skb).pid, ++ cb->nlh->nlmsg_seq, NLM_F_MULTI, ++ dev) < 0) ++ break; ++ } ++ swconfig_unlock(); ++ cb->args[0] = idx; ++ ++ return skb->len; ++} ++ ++static int ++swconfig_done(struct netlink_callback *cb) ++{ ++ return 0; ++} ++ ++static struct genl_ops swconfig_ops[] = { ++ { ++ .cmd = SWITCH_CMD_LIST_GLOBAL, ++ .doit = swconfig_list_attrs, ++ .policy = switch_policy, ++ }, ++ { ++ .cmd = SWITCH_CMD_LIST_VLAN, ++ .doit = swconfig_list_attrs, ++ .policy = switch_policy, ++ }, ++ { ++ .cmd = SWITCH_CMD_LIST_PORT, ++ .doit = swconfig_list_attrs, ++ .policy = switch_policy, ++ }, ++ { ++ .cmd = SWITCH_CMD_GET_GLOBAL, ++ .doit = swconfig_get_attr, ++ .policy = switch_policy, ++ }, ++ { ++ .cmd = SWITCH_CMD_GET_VLAN, ++ .doit = swconfig_get_attr, ++ .policy = switch_policy, ++ }, ++ { ++ .cmd = SWITCH_CMD_GET_PORT, ++ .doit = swconfig_get_attr, ++ .policy = switch_policy, ++ }, ++ { ++ .cmd = SWITCH_CMD_SET_GLOBAL, ++ .doit = swconfig_set_attr, ++ .policy = switch_policy, ++ }, ++ { ++ .cmd = SWITCH_CMD_SET_VLAN, ++ .doit = swconfig_set_attr, ++ .policy = switch_policy, ++ }, ++ { ++ .cmd = SWITCH_CMD_SET_PORT, ++ .doit = swconfig_set_attr, ++ .policy = switch_policy, ++ }, ++ { ++ .cmd = SWITCH_CMD_GET_SWITCH, ++ .dumpit = swconfig_dump_switches, ++ .policy = switch_policy, ++ .done = swconfig_done, ++ } ++}; ++ ++int ++register_switch(struct switch_dev *dev, struct net_device *netdev) ++{ ++ struct switch_dev *sdev; ++ const int max_switches = 8 * sizeof(unsigned long); ++ unsigned long in_use = 0; ++ int i; ++ ++ INIT_LIST_HEAD(&dev->dev_list); ++ if (netdev) { ++ dev->netdev = netdev; ++ if (!dev->alias) ++ dev->alias = netdev->name; ++ } ++ BUG_ON(!dev->alias); ++ ++ if (dev->ports > 0) { ++ dev->portbuf = kzalloc(sizeof(struct switch_port) * dev->ports, ++ GFP_KERNEL); ++ if (!dev->portbuf) ++ return -ENOMEM; ++ } ++ swconfig_defaults_init(dev); ++ spin_lock_init(&dev->lock); ++ swconfig_lock(); ++ dev->id = ++swdev_id; ++ ++ list_for_each_entry(sdev, &swdevs, dev_list) { ++ if (!sscanf(sdev->devname, SWCONFIG_DEVNAME, &i)) ++ continue; ++ if (i < 0 || i > max_switches) ++ continue; ++ ++ set_bit(i, &in_use); ++ } ++ i = find_first_zero_bit(&in_use, max_switches); ++ ++ if (i == max_switches) ++ return -ENFILE; ++ ++ /* fill device name */ ++ snprintf(dev->devname, IFNAMSIZ, SWCONFIG_DEVNAME, i); ++ ++ list_add(&dev->dev_list, &swdevs); ++ swconfig_unlock(); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(register_switch); ++ ++void ++unregister_switch(struct switch_dev *dev) ++{ ++ kfree(dev->portbuf); ++ spin_lock(&dev->lock); ++ swconfig_lock(); ++ list_del(&dev->dev_list); ++ swconfig_unlock(); ++ spin_unlock(&dev->lock); ++} ++EXPORT_SYMBOL_GPL(unregister_switch); ++ ++ ++static int __init ++swconfig_init(void) ++{ ++ int i, err; ++ ++ INIT_LIST_HEAD(&swdevs); ++ err = genl_register_family(&switch_fam); ++ if (err) ++ return err; ++ ++ for (i = 0; i < ARRAY_SIZE(swconfig_ops); i++) { ++ err = genl_register_ops(&switch_fam, &swconfig_ops[i]); ++ if (err) ++ goto unregister; ++ } ++ ++ return 0; ++ ++unregister: ++ genl_unregister_family(&switch_fam); ++ return err; ++} ++ ++static void __exit ++swconfig_exit(void) ++{ ++ genl_unregister_family(&switch_fam); ++} ++ ++module_init(swconfig_init); ++module_exit(swconfig_exit); ++ +diff -Nur linux-2.6.39.orig/drivers/spi/ap83_spi.c linux-2.6.39/drivers/spi/ap83_spi.c +--- linux-2.6.39.orig/drivers/spi/ap83_spi.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/spi/ap83_spi.c 2011-04-27 12:19:22.317665385 +0200 +@@ -0,0 +1,283 @@ ++/* ++ * Atheros AP83 board specific SPI Controller driver ++ * ++ * Copyright (C) 2009 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define DRV_DESC "Atheros AP83 board SPI Controller driver" ++#define DRV_VERSION "0.1.0" ++#define DRV_NAME "ap83-spi" ++ ++#define AP83_SPI_CLK_HIGH (1 << 23) ++#define AP83_SPI_CLK_LOW 0 ++#define AP83_SPI_MOSI_HIGH (1 << 22) ++#define AP83_SPI_MOSI_LOW 0 ++ ++#define AP83_SPI_GPIO_CS 1 ++#define AP83_SPI_GPIO_MISO 3 ++ ++struct ap83_spi { ++ struct spi_bitbang bitbang; ++ void __iomem *base; ++ u32 addr; ++ ++ struct platform_device *pdev; ++}; ++ ++static inline u32 ap83_spi_rr(struct ap83_spi *sp, u32 reg) ++{ ++ return __raw_readl(sp->base + reg); ++} ++ ++static inline struct ap83_spi *spidev_to_sp(struct spi_device *spi) ++{ ++ return spi_master_get_devdata(spi->master); ++} ++ ++static inline void setsck(struct spi_device *spi, int val) ++{ ++ struct ap83_spi *sp = spidev_to_sp(spi); ++ ++ if (val) ++ sp->addr |= AP83_SPI_CLK_HIGH; ++ else ++ sp->addr &= ~AP83_SPI_CLK_HIGH; ++ ++ dev_dbg(&spi->dev, "addr=%08x, SCK set to %s\n", ++ sp->addr, (val) ? "HIGH" : "LOW"); ++ ++ ap83_spi_rr(sp, sp->addr); ++} ++ ++static inline void setmosi(struct spi_device *spi, int val) ++{ ++ struct ap83_spi *sp = spidev_to_sp(spi); ++ ++ if (val) ++ sp->addr |= AP83_SPI_MOSI_HIGH; ++ else ++ sp->addr &= ~AP83_SPI_MOSI_HIGH; ++ ++ dev_dbg(&spi->dev, "addr=%08x, MOSI set to %s\n", ++ sp->addr, (val) ? "HIGH" : "LOW"); ++ ++ ap83_spi_rr(sp, sp->addr); ++} ++ ++static inline u32 getmiso(struct spi_device *spi) ++{ ++ u32 ret; ++ ++ ret = gpio_get_value(AP83_SPI_GPIO_MISO) ? 1 : 0; ++ dev_dbg(&spi->dev, "get MISO: %d\n", ret); ++ ++ return ret; ++} ++ ++static inline void do_spidelay(struct spi_device *spi, unsigned nsecs) ++{ ++ ndelay(nsecs); ++} ++ ++static void ap83_spi_chipselect(struct spi_device *spi, int on) ++{ ++ struct ap83_spi *sp = spidev_to_sp(spi); ++ ++ dev_dbg(&spi->dev, "set CS to %d\n", (on) ? 0 : 1); ++ ++ if (on) { ++ ar71xx_flash_acquire(); ++ ++ sp->addr = 0; ++ ap83_spi_rr(sp, sp->addr); ++ ++ gpio_set_value(AP83_SPI_GPIO_CS, 0); ++ } else { ++ gpio_set_value(AP83_SPI_GPIO_CS, 1); ++ ar71xx_flash_release(); ++ } ++} ++ ++#define spidelay(nsecs) \ ++ do { \ ++ /* Steal the spi_device pointer from our caller. \ ++ * The bitbang-API should probably get fixed here... */ \ ++ do_spidelay(spi, nsecs); \ ++ } while (0) ++ ++#define EXPAND_BITBANG_TXRX ++#include ++#include "spi_bitbang_txrx.h" ++ ++static u32 ap83_spi_txrx_mode0(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ dev_dbg(&spi->dev, "TXRX0 word=%08x, bits=%u\n", word, bits); ++ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); ++} ++ ++static u32 ap83_spi_txrx_mode1(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ dev_dbg(&spi->dev, "TXRX1 word=%08x, bits=%u\n", word, bits); ++ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); ++} ++ ++static u32 ap83_spi_txrx_mode2(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ dev_dbg(&spi->dev, "TXRX2 word=%08x, bits=%u\n", word, bits); ++ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); ++} ++ ++static u32 ap83_spi_txrx_mode3(struct spi_device *spi, ++ unsigned nsecs, u32 word, u8 bits) ++{ ++ dev_dbg(&spi->dev, "TXRX3 word=%08x, bits=%u\n", word, bits); ++ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); ++} ++ ++static int ap83_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct ap83_spi *sp; ++ struct ap83_spi_platform_data *pdata; ++ struct resource *r; ++ int ret; ++ ++ ret = gpio_request(AP83_SPI_GPIO_MISO, "spi-miso"); ++ if (ret) { ++ dev_err(&pdev->dev, "gpio request failed for MISO\n"); ++ return ret; ++ } ++ ++ ret = gpio_request(AP83_SPI_GPIO_CS, "spi-cs"); ++ if (ret) { ++ dev_err(&pdev->dev, "gpio request failed for CS\n"); ++ goto err_free_miso; ++ } ++ ++ ret = gpio_direction_input(AP83_SPI_GPIO_MISO); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set direction of MISO\n"); ++ goto err_free_cs; ++ } ++ ++ ret = gpio_direction_output(AP83_SPI_GPIO_CS, 0); ++ if (ret) { ++ dev_err(&pdev->dev, "unable to set direction of CS\n"); ++ goto err_free_cs; ++ } ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(*sp)); ++ if (master == NULL) { ++ dev_err(&pdev->dev, "failed to allocate spi master\n"); ++ return -ENOMEM; ++ } ++ ++ sp = spi_master_get_devdata(master); ++ platform_set_drvdata(pdev, sp); ++ ++ pdata = pdev->dev.platform_data; ++ ++ sp->bitbang.master = spi_master_get(master); ++ sp->bitbang.chipselect = ap83_spi_chipselect; ++ sp->bitbang.txrx_word[SPI_MODE_0] = ap83_spi_txrx_mode0; ++ sp->bitbang.txrx_word[SPI_MODE_1] = ap83_spi_txrx_mode1; ++ sp->bitbang.txrx_word[SPI_MODE_2] = ap83_spi_txrx_mode2; ++ sp->bitbang.txrx_word[SPI_MODE_3] = ap83_spi_txrx_mode3; ++ ++ sp->bitbang.master->bus_num = pdev->id; ++ sp->bitbang.master->num_chipselect = 1; ++ ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (r == NULL) { ++ ret = -ENOENT; ++ goto err_spi_put; ++ } ++ ++ sp->base = ioremap_nocache(r->start, r->end - r->start + 1); ++ if (!sp->base) { ++ ret = -ENXIO; ++ goto err_spi_put; ++ } ++ ++ ret = spi_bitbang_start(&sp->bitbang); ++ if (!ret) ++ goto err_unmap; ++ ++ dev_info(&pdev->dev, "AP83 SPI adapter at %08x\n", r->start); ++ ++ return 0; ++ ++err_unmap: ++ iounmap(sp->base); ++err_spi_put: ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(sp->bitbang.master); ++ ++err_free_cs: ++ gpio_free(AP83_SPI_GPIO_CS); ++err_free_miso: ++ gpio_free(AP83_SPI_GPIO_MISO); ++ return ret; ++} ++ ++static int ap83_spi_remove(struct platform_device *pdev) ++{ ++ struct ap83_spi *sp = platform_get_drvdata(pdev); ++ ++ spi_bitbang_stop(&sp->bitbang); ++ iounmap(sp->base); ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(sp->bitbang.master); ++ ++ return 0; ++} ++ ++static struct platform_driver ap83_spi_drv = { ++ .probe = ap83_spi_probe, ++ .remove = ap83_spi_remove, ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init ap83_spi_init(void) ++{ ++ return platform_driver_register(&ap83_spi_drv); ++} ++module_init(ap83_spi_init); ++ ++static void __exit ap83_spi_exit(void) ++{ ++ platform_driver_unregister(&ap83_spi_drv); ++} ++module_exit(ap83_spi_exit); ++ ++MODULE_ALIAS("platform:" DRV_NAME); ++MODULE_DESCRIPTION(DRV_DESC); ++MODULE_VERSION(DRV_VERSION); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_LICENSE("GPL v2"); +diff -Nur linux-2.6.39.orig/drivers/spi/ar71xx_spi.c linux-2.6.39/drivers/spi/ar71xx_spi.c +--- linux-2.6.39.orig/drivers/spi/ar71xx_spi.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/spi/ar71xx_spi.c 2011-04-27 12:19:22.317665385 +0200 +@@ -0,0 +1,283 @@ ++/* ++ * Atheros AR71xx SPI Controller driver ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define DRV_DESC "Atheros AR71xx SPI Controller driver" ++#define DRV_VERSION "0.2.4" ++#define DRV_NAME "ar71xx-spi" ++ ++#undef PER_BIT_READ ++ ++struct ar71xx_spi { ++ struct spi_bitbang bitbang; ++ u32 ioc_base; ++ u32 reg_ctrl; ++ ++ void __iomem *base; ++ ++ struct platform_device *pdev; ++ u32 (*get_ioc_base)(u8 chip_select, int cs_high, ++ int is_on); ++}; ++ ++static inline u32 ar71xx_spi_rr(struct ar71xx_spi *sp, unsigned reg) ++{ ++ return __raw_readl(sp->base + reg); ++} ++ ++static inline void ar71xx_spi_wr(struct ar71xx_spi *sp, unsigned reg, u32 val) ++{ ++ __raw_writel(val, sp->base + reg); ++} ++ ++static inline struct ar71xx_spi *spidev_to_sp(struct spi_device *spi) ++{ ++ return spi_master_get_devdata(spi->master); ++} ++ ++static u32 ar71xx_spi_get_ioc_base(u8 chip_select, int cs_high, int is_on) ++{ ++ u32 ret; ++ ++ if (is_on == AR71XX_SPI_CS_INACTIVE) ++ ret = SPI_IOC_CS_ALL; ++ else ++ ret = SPI_IOC_CS_ALL & ~SPI_IOC_CS(chip_select); ++ ++ return ret; ++} ++ ++static void ar71xx_spi_chipselect(struct spi_device *spi, int value) ++{ ++ struct ar71xx_spi *sp = spidev_to_sp(spi); ++ void __iomem *base = sp->base; ++ u32 ioc_base; ++ ++ switch (value) { ++ case BITBANG_CS_INACTIVE: ++ ioc_base = sp->get_ioc_base(spi->chip_select, ++ (spi->mode & SPI_CS_HIGH) != 0, ++ AR71XX_SPI_CS_INACTIVE); ++ __raw_writel(ioc_base, base + SPI_REG_IOC); ++ break; ++ ++ case BITBANG_CS_ACTIVE: ++ ioc_base = sp->get_ioc_base(spi->chip_select, ++ (spi->mode & SPI_CS_HIGH) != 0, ++ AR71XX_SPI_CS_ACTIVE); ++ ++ __raw_writel(ioc_base, base + SPI_REG_IOC); ++ sp->ioc_base = ioc_base; ++ break; ++ } ++} ++ ++static void ar71xx_spi_setup_regs(struct spi_device *spi) ++{ ++ struct ar71xx_spi *sp = spidev_to_sp(spi); ++ ++ /* enable GPIO mode */ ++ ar71xx_spi_wr(sp, SPI_REG_FS, SPI_FS_GPIO); ++ ++ /* save CTRL register */ ++ sp->reg_ctrl = ar71xx_spi_rr(sp, SPI_REG_CTRL); ++ ++ /* TODO: setup speed? */ ++ ar71xx_spi_wr(sp, SPI_REG_CTRL, 0x43); ++} ++ ++static void ar71xx_spi_restore_regs(struct spi_device *spi) ++{ ++ struct ar71xx_spi *sp = spidev_to_sp(spi); ++ ++ /* restore CTRL register */ ++ ar71xx_spi_wr(sp, SPI_REG_CTRL, sp->reg_ctrl); ++ /* disable GPIO mode */ ++ ar71xx_spi_wr(sp, SPI_REG_FS, 0); ++} ++ ++static int ar71xx_spi_setup(struct spi_device *spi) ++{ ++ int status; ++ ++ if (spi->bits_per_word > 32) ++ return -EINVAL; ++ ++ if (!spi->controller_state) ++ ar71xx_spi_setup_regs(spi); ++ ++ status = spi_bitbang_setup(spi); ++ if (status && !spi->controller_state) ++ ar71xx_spi_restore_regs(spi); ++ ++ return status; ++} ++ ++static void ar71xx_spi_cleanup(struct spi_device *spi) ++{ ++ ar71xx_spi_restore_regs(spi); ++ spi_bitbang_cleanup(spi); ++} ++ ++static u32 ar71xx_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, ++ u32 word, u8 bits) ++{ ++ struct ar71xx_spi *sp = spidev_to_sp(spi); ++ void __iomem *base = sp->base; ++ u32 ioc = sp->ioc_base; ++ u32 ret; ++ ++ /* clock starts at inactive polarity */ ++ for (word <<= (32 - bits); likely(bits); bits--) { ++ u32 out; ++ ++ if (word & (1 << 31)) ++ out = ioc | SPI_IOC_DO; ++ else ++ out = ioc & ~SPI_IOC_DO; ++ ++ /* setup MSB (to slave) on trailing edge */ ++ __raw_writel(out, base + SPI_REG_IOC); ++ ++ __raw_writel(out | SPI_IOC_CLK, base + SPI_REG_IOC); ++ ++ word <<= 1; ++ ++#ifdef PER_BIT_READ ++ /* sample MSB (from slave) on leading edge */ ++ ret = __raw_readl(base + SPI_REG_RDS); ++ __raw_writel(out, base + SPI_REG_IOC); ++#endif ++ ++ } ++ ++#ifndef PER_BIT_READ ++ ret = __raw_readl(base + SPI_REG_RDS); ++#endif ++ return ret; ++} ++ ++static int ar71xx_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct ar71xx_spi *sp; ++ struct ar71xx_spi_platform_data *pdata; ++ struct resource *r; ++ int ret; ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(*sp)); ++ if (master == NULL) { ++ dev_err(&pdev->dev, "failed to allocate spi master\n"); ++ return -ENOMEM; ++ } ++ ++ sp = spi_master_get_devdata(master); ++ platform_set_drvdata(pdev, sp); ++ ++ pdata = pdev->dev.platform_data; ++ ++ master->setup = ar71xx_spi_setup; ++ master->cleanup = ar71xx_spi_cleanup; ++ ++ sp->bitbang.master = spi_master_get(master); ++ sp->bitbang.chipselect = ar71xx_spi_chipselect; ++ sp->bitbang.txrx_word[SPI_MODE_0] = ar71xx_spi_txrx_mode0; ++ sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; ++ ++ sp->get_ioc_base = ar71xx_spi_get_ioc_base; ++ if (pdata) { ++ sp->bitbang.master->bus_num = pdata->bus_num; ++ sp->bitbang.master->num_chipselect = pdata->num_chipselect; ++ if (pdata->get_ioc_base) ++ sp->get_ioc_base = pdata->get_ioc_base; ++ } else { ++ sp->bitbang.master->bus_num = 0; ++ sp->bitbang.master->num_chipselect = 3; ++ } ++ ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (r == NULL) { ++ ret = -ENOENT; ++ goto err1; ++ } ++ ++ sp->base = ioremap_nocache(r->start, r->end - r->start + 1); ++ if (!sp->base) { ++ ret = -ENXIO; ++ goto err1; ++ } ++ ++ ret = spi_bitbang_start(&sp->bitbang); ++ if (!ret) ++ return 0; ++ ++ iounmap(sp->base); ++err1: ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(sp->bitbang.master); ++ ++ return ret; ++} ++ ++static int ar71xx_spi_remove(struct platform_device *pdev) ++{ ++ struct ar71xx_spi *sp = platform_get_drvdata(pdev); ++ ++ spi_bitbang_stop(&sp->bitbang); ++ iounmap(sp->base); ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(sp->bitbang.master); ++ ++ return 0; ++} ++ ++static struct platform_driver ar71xx_spi_drv = { ++ .probe = ar71xx_spi_probe, ++ .remove = ar71xx_spi_remove, ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init ar71xx_spi_init(void) ++{ ++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); ++ return platform_driver_register(&ar71xx_spi_drv); ++} ++module_init(ar71xx_spi_init); ++ ++static void __exit ar71xx_spi_exit(void) ++{ ++ platform_driver_unregister(&ar71xx_spi_drv); ++} ++module_exit(ar71xx_spi_exit); ++ ++MODULE_ALIAS("platform:" DRV_NAME); ++MODULE_DESCRIPTION(DRV_DESC); ++MODULE_VERSION(DRV_VERSION); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_AUTHOR("Imre Kaloz "); ++MODULE_LICENSE("GPL v2"); +diff -Nur linux-2.6.39.orig/drivers/spi/Kconfig linux-2.6.39/drivers/spi/Kconfig +--- linux-2.6.39.orig/drivers/spi/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/spi/Kconfig 2011-08-23 15:10:24.167989908 +0200 +@@ -67,6 +67,13 @@ + This enables support for the SPI controller present on the + Atheros AR71XX/AR724X/AR913X SoCs. + ++config SPI_AR71XX ++ tristate "Atheros AR71xx SPI Controller" ++ depends on SPI_MASTER && ATHEROS_AR71XX ++ select SPI_BITBANG ++ help ++ This is the SPI contoller driver for Atheros AR71xx. ++ + config SPI_ATMEL + tristate "Atmel SPI Controller" + depends on (ARCH_AT91 || AVR32) +@@ -301,6 +308,12 @@ + config SPI_PXA2XX_PCI + def_bool SPI_PXA2XX && X86_32 && PCI + ++config SPI_RB4XX ++ tristate "Mikrotik RB4XX SPI master" ++ depends on SPI_MASTER && AR71XX_MACH_RB4XX ++ help ++ SPI controller driver for the Mikrotik RB4xx series boards. ++ + config SPI_S3C24XX + tristate "Samsung S3C24XX series SPI" + depends on ARCH_S3C2410 && EXPERIMENTAL +@@ -457,6 +470,13 @@ + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on AR71XX_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +diff -Nur linux-2.6.39.orig/drivers/spi/Kconfig.orig linux-2.6.39/drivers/spi/Kconfig.orig +--- linux-2.6.39.orig/drivers/spi/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/spi/Kconfig.orig 2011-08-23 15:10:11.277991848 +0200 +@@ -0,0 +1,482 @@ ++# ++# SPI driver configuration ++# ++# NOTE: the reason this doesn't show SPI slave support is mostly that ++# nobody's needed a slave side API yet. The master-role API is not ++# fully appropriate there, so it'd need some thought to do well. ++# ++menuconfig SPI ++ bool "SPI support" ++ depends on HAS_IOMEM ++ help ++ The "Serial Peripheral Interface" is a low level synchronous ++ protocol. Chips that support SPI can have data transfer rates ++ up to several tens of Mbit/sec. Chips are addressed with a ++ controller and a chipselect. Most SPI slaves don't support ++ dynamic device discovery; some are even write-only or read-only. ++ ++ SPI is widely used by microcontrollers to talk with sensors, ++ eeprom and flash memory, codecs and various other controller ++ chips, analog to digital (and d-to-a) converters, and more. ++ MMC and SD cards can be accessed using SPI protocol; and for ++ DataFlash cards used in MMC sockets, SPI must always be used. ++ ++ SPI is one of a family of similar protocols using a four wire ++ interface (select, clock, data in, data out) including Microwire ++ (half duplex), SSP, SSI, and PSP. This driver framework should ++ work with most such devices and controllers. ++ ++if SPI ++ ++config SPI_DEBUG ++ boolean "Debug support for SPI drivers" ++ depends on DEBUG_KERNEL ++ help ++ Say "yes" to enable debug messaging (like dev_dbg and pr_debug), ++ sysfs, and debugfs support in SPI controller and protocol drivers. ++ ++# ++# MASTER side ... talking to discrete SPI slave chips including microcontrollers ++# ++ ++config SPI_MASTER ++# boolean "SPI Master Support" ++ boolean ++ default SPI ++ help ++ If your system has an master-capable SPI controller (which ++ provides the clock and chipselect), you can enable that ++ controller and the protocol drivers for the SPI slave chips ++ that are connected. ++ ++if SPI_MASTER ++ ++comment "SPI Master Controller Drivers" ++ ++config SPI_ALTERA ++ tristate "Altera SPI Controller" ++ select SPI_BITBANG ++ help ++ This is the driver for the Altera SPI Controller. ++ ++config SPI_ATH79 ++ tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" ++ depends on ATH79 && GENERIC_GPIO ++ select SPI_BITBANG ++ help ++ This enables support for the SPI controller present on the ++ Atheros AR71XX/AR724X/AR913X SoCs. ++ ++config SPI_AR71XX ++ tristate "Atheros AR71xx SPI Controller" ++ depends on SPI_MASTER && ATHEROS_AR71XX ++ select SPI_BITBANG ++ help ++ This is the SPI contoller driver for Atheros AR71xx. ++ ++config SPI_ATMEL ++ tristate "Atmel SPI Controller" ++ depends on (ARCH_AT91 || AVR32) ++ help ++ This selects a driver for the Atmel SPI Controller, present on ++ many AT32 (AVR32) and AT91 (ARM) chips. ++ ++config SPI_BFIN ++ tristate "SPI controller driver for ADI Blackfin5xx" ++ depends on BLACKFIN ++ help ++ This is the SPI controller master driver for Blackfin 5xx processor. ++ ++config SPI_AU1550 ++ tristate "Au1550/Au12x0 SPI Controller" ++ depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL ++ select SPI_BITBANG ++ help ++ If you say yes to this option, support will be included for the ++ Au1550 SPI controller (may also work with Au1200,Au1210,Au1250). ++ ++ This driver can also be built as a module. If so, the module ++ will be called au1550_spi. ++ ++config SPI_BITBANG ++ tristate "Utilities for Bitbanging SPI masters" ++ help ++ With a few GPIO pins, your system can bitbang the SPI protocol. ++ Select this to get SPI support through I/O pins (GPIO, parallel ++ port, etc). Or, some systems' SPI master controller drivers use ++ this code to manage the per-word or per-transfer accesses to the ++ hardware shift registers. ++ ++ This is library code, and is automatically selected by drivers that ++ need it. You only need to select this explicitly to support driver ++ modules that aren't part of this kernel tree. ++ ++config SPI_BUTTERFLY ++ tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)" ++ depends on PARPORT ++ select SPI_BITBANG ++ help ++ This uses a custom parallel port cable to connect to an AVR ++ Butterfly , an ++ inexpensive battery powered microcontroller evaluation board. ++ This same cable can be used to flash new firmware. ++ ++config SPI_COLDFIRE_QSPI ++ tristate "Freescale Coldfire QSPI controller" ++ depends on (M520x || M523x || M5249 || M527x || M528x || M532x) ++ help ++ This enables support for the Coldfire QSPI controller in master ++ mode. ++ ++ This driver can also be built as a module. If so, the module ++ will be called coldfire_qspi. ++ ++config SPI_DAVINCI ++ tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" ++ depends on SPI_MASTER && ARCH_DAVINCI ++ select SPI_BITBANG ++ help ++ SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. ++ ++ This driver can also be built as a module. The module will be called ++ davinci_spi. ++ ++config SPI_EP93XX ++ tristate "Cirrus Logic EP93xx SPI controller" ++ depends on ARCH_EP93XX ++ help ++ This enables using the Cirrus EP93xx SPI controller in master ++ mode. ++ ++ To compile this driver as a module, choose M here. The module will be ++ called ep93xx_spi. ++ ++config SPI_GPIO ++ tristate "GPIO-based bitbanging SPI Master" ++ depends on GENERIC_GPIO ++ select SPI_BITBANG ++ help ++ This simple GPIO bitbanging SPI master uses the arch-neutral GPIO ++ interface to manage MOSI, MISO, SCK, and chipselect signals. SPI ++ slaves connected to a bus using this driver are configured as usual, ++ except that the spi_board_info.controller_data holds the GPIO number ++ for the chipselect used by this controller driver. ++ ++ Note that this driver often won't achieve even 1 Mbit/sec speeds, ++ making it unusually slow for SPI. If your platform can inline ++ GPIO operations, you should be able to leverage that for better ++ speed with a custom version of this driver; see the source code. ++ ++config SPI_IMX_VER_IMX1 ++ def_bool y if SOC_IMX1 ++ ++config SPI_IMX_VER_0_0 ++ def_bool y if SOC_IMX21 || SOC_IMX27 ++ ++config SPI_IMX_VER_0_4 ++ def_bool y if SOC_IMX31 ++ ++config SPI_IMX_VER_0_7 ++ def_bool y if ARCH_MX25 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 ++ ++config SPI_IMX_VER_2_3 ++ def_bool y if SOC_IMX51 || SOC_IMX53 ++ ++config SPI_IMX ++ tristate "Freescale i.MX SPI controllers" ++ depends on ARCH_MXC ++ select SPI_BITBANG ++ default m if IMX_HAVE_PLATFORM_SPI_IMX ++ help ++ This enables using the Freescale i.MX SPI controllers in master ++ mode. ++ ++config SPI_LM70_LLP ++ tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" ++ depends on PARPORT && EXPERIMENTAL ++ select SPI_BITBANG ++ help ++ This driver supports the NS LM70 LLP Evaluation Board, ++ which interfaces to an LM70 temperature sensor using ++ a parallel port. ++ ++config SPI_MPC52xx ++ tristate "Freescale MPC52xx SPI (non-PSC) controller support" ++ depends on PPC_MPC52xx && SPI ++ select SPI_MASTER_OF ++ help ++ This drivers supports the MPC52xx SPI controller in master SPI ++ mode. ++ ++config SPI_MPC52xx_PSC ++ tristate "Freescale MPC52xx PSC SPI controller" ++ depends on PPC_MPC52xx && EXPERIMENTAL ++ help ++ This enables using the Freescale MPC52xx Programmable Serial ++ Controller in master SPI mode. ++ ++config SPI_MPC512x_PSC ++ tristate "Freescale MPC512x PSC SPI controller" ++ depends on SPI_MASTER && PPC_MPC512x ++ help ++ This enables using the Freescale MPC5121 Programmable Serial ++ Controller in SPI master mode. ++ ++config SPI_FSL_LIB ++ tristate ++ depends on FSL_SOC ++ ++config SPI_FSL_SPI ++ tristate "Freescale SPI controller" ++ depends on FSL_SOC ++ select SPI_FSL_LIB ++ help ++ This enables using the Freescale SPI controllers in master mode. ++ MPC83xx platform uses the controller in cpu mode or CPM/QE mode. ++ MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. ++ ++config SPI_FSL_ESPI ++ tristate "Freescale eSPI controller" ++ depends on FSL_SOC ++ select SPI_FSL_LIB ++ help ++ This enables using the Freescale eSPI controllers in master mode. ++ From MPC8536, 85xx platform uses the controller, and all P10xx, ++ P20xx, P30xx,P40xx, P50xx uses this controller. ++ ++config SPI_OC_TINY ++ tristate "OpenCores tiny SPI" ++ depends on GENERIC_GPIO ++ select SPI_BITBANG ++ help ++ This is the driver for OpenCores tiny SPI master controller. ++ ++config SPI_OMAP_UWIRE ++ tristate "OMAP1 MicroWire" ++ depends on ARCH_OMAP1 ++ select SPI_BITBANG ++ help ++ This hooks up to the MicroWire controller on OMAP1 chips. ++ ++config SPI_OMAP24XX ++ tristate "McSPI driver for OMAP" ++ depends on ARCH_OMAP2PLUS ++ help ++ SPI master controller for OMAP24XX and later Multichannel SPI ++ (McSPI) modules. ++ ++config SPI_OMAP_100K ++ tristate "OMAP SPI 100K" ++ depends on SPI_MASTER && (ARCH_OMAP850 || ARCH_OMAP730) ++ help ++ OMAP SPI 100K master controller for omap7xx boards. ++ ++config SPI_ORION ++ tristate "Orion SPI master (EXPERIMENTAL)" ++ depends on PLAT_ORION && EXPERIMENTAL ++ help ++ This enables using the SPI master controller on the Orion chips. ++ ++config SPI_PL022 ++ tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)" ++ depends on ARM_AMBA && EXPERIMENTAL ++ default y if MACH_U300 ++ default y if ARCH_REALVIEW ++ default y if INTEGRATOR_IMPD1 ++ default y if ARCH_VERSATILE ++ help ++ This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP ++ controller. If you have an embedded system with an AMBA(R) ++ bus and a PL022 controller, say Y or M here. ++ ++config SPI_PPC4xx ++ tristate "PPC4xx SPI Controller" ++ depends on PPC32 && 4xx && SPI_MASTER ++ select SPI_BITBANG ++ help ++ This selects a driver for the PPC4xx SPI Controller. ++ ++config SPI_PXA2XX ++ tristate "PXA2xx SSP SPI master" ++ depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL ++ select PXA_SSP if ARCH_PXA ++ help ++ This enables using a PXA2xx or Sodaville SSP port as a SPI master ++ controller. The driver can be configured to use any SSP port and ++ additional documentation can be found a Documentation/spi/pxa2xx. ++ ++config SPI_PXA2XX_PCI ++ def_bool SPI_PXA2XX && X86_32 && PCI ++ ++config SPI_S3C24XX ++ tristate "Samsung S3C24XX series SPI" ++ depends on ARCH_S3C2410 && EXPERIMENTAL ++ select SPI_BITBANG ++ help ++ SPI driver for Samsung S3C24XX series ARM SoCs ++ ++config SPI_S3C24XX_FIQ ++ bool "S3C24XX driver with FIQ pseudo-DMA" ++ depends on SPI_S3C24XX ++ select FIQ ++ help ++ Enable FIQ support for the S3C24XX SPI driver to provide pseudo ++ DMA by using the fast-interrupt request framework, This allows ++ the driver to get DMA-like performance when there are either ++ no free DMA channels, or when doing transfers that required both ++ TX and RX data paths. ++ ++config SPI_S3C24XX_GPIO ++ tristate "Samsung S3C24XX series SPI by GPIO" ++ depends on ARCH_S3C2410 && EXPERIMENTAL ++ select SPI_BITBANG ++ help ++ SPI driver for Samsung S3C24XX series ARM SoCs using ++ GPIO lines to provide the SPI bus. This can be used where ++ the inbuilt hardware cannot provide the transfer mode, or ++ where the board is using non hardware connected pins. ++ ++config SPI_S3C64XX ++ tristate "Samsung S3C64XX series type SPI" ++ depends on (ARCH_S3C64XX || ARCH_S5P64X0) ++ select S3C64XX_DMA if ARCH_S3C64XX ++ help ++ SPI driver for Samsung S3C64XX and newer SoCs. ++ ++config SPI_SH_MSIOF ++ tristate "SuperH MSIOF SPI controller" ++ depends on SUPERH && HAVE_CLK ++ select SPI_BITBANG ++ help ++ SPI driver for SuperH MSIOF blocks. ++ ++config SPI_SH ++ tristate "SuperH SPI controller" ++ depends on SUPERH ++ help ++ SPI driver for SuperH SPI blocks. ++ ++config SPI_SH_SCI ++ tristate "SuperH SCI SPI controller" ++ depends on SUPERH ++ select SPI_BITBANG ++ help ++ SPI driver for SuperH SCI blocks. ++ ++config SPI_STMP3XXX ++ tristate "Freescale STMP37xx/378x SPI/SSP controller" ++ depends on ARCH_STMP3XXX && SPI_MASTER ++ help ++ SPI driver for Freescale STMP37xx/378x SoC SSP interface ++ ++config SPI_TEGRA ++ tristate "Nvidia Tegra SPI controller" ++ depends on ARCH_TEGRA ++ select TEGRA_SYSTEM_DMA ++ help ++ SPI driver for NVidia Tegra SoCs ++ ++config SPI_TI_SSP ++ tristate "TI Sequencer Serial Port - SPI Support" ++ depends on MFD_TI_SSP ++ help ++ This selects an SPI master implementation using a TI sequencer ++ serial port. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called ti-ssp-spi. ++ ++config SPI_TOPCLIFF_PCH ++ tristate "Topcliff PCH SPI Controller" ++ depends on PCI ++ help ++ SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus ++ used in some x86 embedded processors. ++ ++config SPI_TXX9 ++ tristate "Toshiba TXx9 SPI controller" ++ depends on GENERIC_GPIO && CPU_TX49XX ++ help ++ SPI driver for Toshiba TXx9 MIPS SoCs ++ ++config SPI_XILINX ++ tristate "Xilinx SPI controller common module" ++ depends on HAS_IOMEM && EXPERIMENTAL ++ select SPI_BITBANG ++ help ++ This exposes the SPI controller IP from the Xilinx EDK. ++ ++ See the "OPB Serial Peripheral Interface (SPI) (v1.00e)" ++ Product Specification document (DS464) for hardware details. ++ ++ Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)" ++ ++config SPI_NUC900 ++ tristate "Nuvoton NUC900 series SPI" ++ depends on ARCH_W90X900 && EXPERIMENTAL ++ select SPI_BITBANG ++ help ++ SPI driver for Nuvoton NUC900 series ARM SoCs ++ ++# ++# Add new SPI master controllers in alphabetical order above this line ++# ++ ++config SPI_DESIGNWARE ++ tristate "DesignWare SPI controller core support" ++ depends on SPI_MASTER ++ help ++ general driver for SPI controller core from DesignWare ++ ++config SPI_DW_PCI ++ tristate "PCI interface driver for DW SPI core" ++ depends on SPI_DESIGNWARE && PCI ++ ++config SPI_DW_MID_DMA ++ bool "DMA support for DW SPI controller on Intel Moorestown platform" ++ depends on SPI_DW_PCI && INTEL_MID_DMAC ++ ++config SPI_DW_MMIO ++ tristate "Memory-mapped io interface driver for DW SPI core" ++ depends on SPI_DESIGNWARE && HAVE_CLK ++ ++# ++# There are lots of SPI device types, with sensors and memory ++# being probably the most widely used ones. ++# ++comment "SPI Protocol Masters" ++ ++config SPI_SPIDEV ++ tristate "User mode SPI device driver support" ++ depends on EXPERIMENTAL ++ help ++ This supports user mode SPI protocol drivers. ++ ++ Note that this application programming interface is EXPERIMENTAL ++ and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes. ++ ++config SPI_TLE62X0 ++ tristate "Infineon TLE62X0 (for power switching)" ++ depends on SYSFS ++ help ++ SPI driver for Infineon TLE62X0 series line driver chips, ++ such as the TLE6220, TLE6230 and TLE6240. This provides a ++ sysfs interface, with each line presented as a kind of GPIO ++ exposing both switch control and diagnostic feedback. ++ ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on AR71XX_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ ++# ++# Add new SPI protocol masters in alphabetical order above this line ++# ++ ++endif # SPI_MASTER ++ ++# (slave support would go here) ++ ++endif # SPI +diff -Nur linux-2.6.39.orig/drivers/spi/Makefile linux-2.6.39/drivers/spi/Makefile +--- linux-2.6.39.orig/drivers/spi/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/spi/Makefile 2011-08-23 15:10:24.199233941 +0200 +@@ -10,6 +10,7 @@ + + # SPI master controller drivers (bus) + obj-$(CONFIG_SPI_ALTERA) += spi_altera.o ++obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o + obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o + obj-$(CONFIG_SPI_ATH79) += ath79_spi.o + obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o +@@ -54,6 +55,7 @@ + obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o + obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o + obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o ++obj-$(CONFIG_SPI_RB4XX) += rb4xx_spi.o + + # special build for s3c24xx spi driver with fiq support + spi_s3c24xx_hw-y := spi_s3c24xx.o +@@ -62,6 +64,7 @@ + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o + obj-$(CONFIG_SPI_SPIDEV) += spidev.o + obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o + # ... add above this line ... +diff -Nur linux-2.6.39.orig/drivers/spi/Makefile.orig linux-2.6.39/drivers/spi/Makefile.orig +--- linux-2.6.39.orig/drivers/spi/Makefile.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/spi/Makefile.orig 2011-08-23 15:10:11.300479072 +0200 +@@ -0,0 +1,75 @@ ++# ++# Makefile for kernel SPI drivers. ++# ++ ++ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG ++ ++# small core, mostly translating board-specific ++# config declarations into driver model code ++obj-$(CONFIG_SPI_MASTER) += spi.o ++ ++# SPI master controller drivers (bus) ++obj-$(CONFIG_SPI_ALTERA) += spi_altera.o ++obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o ++obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o ++obj-$(CONFIG_SPI_ATH79) += ath79_spi.o ++obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o ++obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o ++obj-$(CONFIG_SPI_AU1550) += au1550_spi.o ++obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o ++obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o ++obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o ++obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o ++obj-$(CONFIG_SPI_DW_PCI) += dw_spi_midpci.o ++dw_spi_midpci-objs := dw_spi_pci.o dw_spi_mid.o ++obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o ++obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o ++obj-$(CONFIG_SPI_GPIO) += spi_gpio.o ++obj-$(CONFIG_SPI_IMX) += spi_imx.o ++obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o ++obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o ++obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o ++obj-$(CONFIG_SPI_OC_TINY) += spi_oc_tiny.o ++obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o ++obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o ++obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o ++obj-$(CONFIG_SPI_ORION) += orion_spi.o ++obj-$(CONFIG_SPI_PL022) += amba-pl022.o ++obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o ++obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o ++obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o ++obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o ++obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o ++obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o ++obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o ++obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o ++obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o ++obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o ++obj-$(CONFIG_SPI_TEGRA) += spi_tegra.o ++obj-$(CONFIG_SPI_TI_SSP) += ti-ssp-spi.o ++obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o ++obj-$(CONFIG_SPI_TXX9) += spi_txx9.o ++obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o ++obj-$(CONFIG_SPI_SH) += spi_sh.o ++obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o ++obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o ++obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o ++obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o ++ ++# special build for s3c24xx spi driver with fiq support ++spi_s3c24xx_hw-y := spi_s3c24xx.o ++spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o ++ ++# ... add above this line ... ++ ++# SPI protocol drivers (device/link on bus) ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o ++obj-$(CONFIG_SPI_SPIDEV) += spidev.o ++obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o ++# ... add above this line ... ++ ++# SPI slave controller drivers (upstream link) ++# ... add above this line ... ++ ++# SPI slave drivers (protocol for that link) ++# ... add above this line ... +diff -Nur linux-2.6.39.orig/drivers/spi/pb44_spi.c linux-2.6.39/drivers/spi/pb44_spi.c +--- linux-2.6.39.orig/drivers/spi/pb44_spi.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/spi/pb44_spi.c 2011-04-27 12:19:22.317665385 +0200 +@@ -0,0 +1,299 @@ ++/* ++ * Atheros PB44 board SPI controller driver ++ * ++ * Copyright (C) 2009 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define DRV_DESC "Atheros PB44 SPI Controller driver" ++#define DRV_VERSION "0.1.0" ++#define DRV_NAME "pb44-spi" ++ ++#undef PER_BIT_READ ++ ++struct ar71xx_spi { ++ struct spi_bitbang bitbang; ++ u32 ioc_base; ++ u32 reg_ctrl; ++ ++ void __iomem *base; ++ ++ struct platform_device *pdev; ++}; ++ ++static inline u32 pb44_spi_rr(struct ar71xx_spi *sp, unsigned reg) ++{ ++ return __raw_readl(sp->base + reg); ++} ++ ++static inline void pb44_spi_wr(struct ar71xx_spi *sp, unsigned reg, u32 val) ++{ ++ __raw_writel(val, sp->base + reg); ++} ++ ++static inline struct ar71xx_spi *spidev_to_sp(struct spi_device *spi) ++{ ++ return spi_master_get_devdata(spi->master); ++} ++ ++static void pb44_spi_chipselect(struct spi_device *spi, int is_active) ++{ ++ struct ar71xx_spi *sp = spidev_to_sp(spi); ++ int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; ++ ++ if (is_active) { ++ /* set initial clock polarity */ ++ if (spi->mode & SPI_CPOL) ++ sp->ioc_base |= SPI_IOC_CLK; ++ else ++ sp->ioc_base &= ~SPI_IOC_CLK; ++ ++ pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base); ++ } ++ ++ if (spi->chip_select) { ++ unsigned long gpio = (unsigned long) spi->controller_data; ++ ++ /* SPI is normally active-low */ ++ gpio_set_value(gpio, cs_high); ++ } else { ++ if (cs_high) ++ sp->ioc_base |= SPI_IOC_CS0; ++ else ++ sp->ioc_base &= ~SPI_IOC_CS0; ++ ++ pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base); ++ } ++ ++} ++ ++static int pb44_spi_setup_cs(struct spi_device *spi) ++{ ++ struct ar71xx_spi *sp = spidev_to_sp(spi); ++ ++ /* enable GPIO mode */ ++ pb44_spi_wr(sp, SPI_REG_FS, SPI_FS_GPIO); ++ ++ /* save CTRL register */ ++ sp->reg_ctrl = pb44_spi_rr(sp, SPI_REG_CTRL); ++ sp->ioc_base = pb44_spi_rr(sp, SPI_REG_IOC); ++ ++ /* TODO: setup speed? */ ++ pb44_spi_wr(sp, SPI_REG_CTRL, 0x43); ++ ++ if (spi->chip_select) { ++ unsigned long gpio = (unsigned long) spi->controller_data; ++ int status = 0; ++ ++ status = gpio_request(gpio, dev_name(&spi->dev)); ++ if (status) ++ return status; ++ ++ status = gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH); ++ if (status) { ++ gpio_free(gpio); ++ return status; ++ } ++ } else { ++ if (spi->mode & SPI_CS_HIGH) ++ sp->ioc_base |= SPI_IOC_CS0; ++ else ++ sp->ioc_base &= ~SPI_IOC_CS0; ++ pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base); ++ } ++ ++ return 0; ++} ++ ++static void pb44_spi_cleanup_cs(struct spi_device *spi) ++{ ++ struct ar71xx_spi *sp = spidev_to_sp(spi); ++ ++ if (spi->chip_select) { ++ unsigned long gpio = (unsigned long) spi->controller_data; ++ gpio_free(gpio); ++ } ++ ++ /* restore CTRL register */ ++ pb44_spi_wr(sp, SPI_REG_CTRL, sp->reg_ctrl); ++ /* disable GPIO mode */ ++ pb44_spi_wr(sp, SPI_REG_FS, 0); ++} ++ ++static int pb44_spi_setup(struct spi_device *spi) ++{ ++ int status = 0; ++ ++ if (spi->bits_per_word > 32) ++ return -EINVAL; ++ ++ if (!spi->controller_state) { ++ status = pb44_spi_setup_cs(spi); ++ if (status) ++ return status; ++ } ++ ++ status = spi_bitbang_setup(spi); ++ if (status && !spi->controller_state) ++ pb44_spi_cleanup_cs(spi); ++ ++ return status; ++} ++ ++static void pb44_spi_cleanup(struct spi_device *spi) ++{ ++ pb44_spi_cleanup_cs(spi); ++ spi_bitbang_cleanup(spi); ++} ++ ++static u32 pb44_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, ++ u32 word, u8 bits) ++{ ++ struct ar71xx_spi *sp = spidev_to_sp(spi); ++ u32 ioc = sp->ioc_base; ++ u32 ret; ++ ++ /* clock starts at inactive polarity */ ++ for (word <<= (32 - bits); likely(bits); bits--) { ++ u32 out; ++ ++ if (word & (1 << 31)) ++ out = ioc | SPI_IOC_DO; ++ else ++ out = ioc & ~SPI_IOC_DO; ++ ++ /* setup MSB (to slave) on trailing edge */ ++ pb44_spi_wr(sp, SPI_REG_IOC, out); ++ pb44_spi_wr(sp, SPI_REG_IOC, out | SPI_IOC_CLK); ++ ++ word <<= 1; ++ ++#ifdef PER_BIT_READ ++ /* sample MSB (from slave) on leading edge */ ++ ret = pb44_spi_rr(sp, SPI_REG_RDS); ++ pb44_spi_wr(sp, SPI_REG_IOC, out); ++#endif ++ } ++ ++#ifndef PER_BIT_READ ++ ret = pb44_spi_rr(sp, SPI_REG_RDS); ++#endif ++ return ret; ++} ++ ++static int pb44_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct ar71xx_spi *sp; ++ struct ar71xx_spi_platform_data *pdata; ++ struct resource *r; ++ int ret; ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(*sp)); ++ if (master == NULL) { ++ dev_err(&pdev->dev, "failed to allocate spi master\n"); ++ return -ENOMEM; ++ } ++ ++ sp = spi_master_get_devdata(master); ++ platform_set_drvdata(pdev, sp); ++ ++ pdata = pdev->dev.platform_data; ++ ++ master->setup = pb44_spi_setup; ++ master->cleanup = pb44_spi_cleanup; ++ if (pdata) { ++ master->bus_num = pdata->bus_num; ++ master->num_chipselect = pdata->num_chipselect; ++ } else { ++ master->bus_num = 0; ++ master->num_chipselect = 1; ++ } ++ ++ sp->bitbang.master = spi_master_get(master); ++ sp->bitbang.chipselect = pb44_spi_chipselect; ++ sp->bitbang.txrx_word[SPI_MODE_0] = pb44_spi_txrx_mode0; ++ sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; ++ sp->bitbang.flags = SPI_CS_HIGH; ++ ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (r == NULL) { ++ ret = -ENOENT; ++ goto err1; ++ } ++ ++ sp->base = ioremap_nocache(r->start, r->end - r->start + 1); ++ if (!sp->base) { ++ ret = -ENXIO; ++ goto err1; ++ } ++ ++ ret = spi_bitbang_start(&sp->bitbang); ++ if (!ret) ++ return 0; ++ ++ iounmap(sp->base); ++err1: ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(sp->bitbang.master); ++ ++ return ret; ++} ++ ++static int pb44_spi_remove(struct platform_device *pdev) ++{ ++ struct ar71xx_spi *sp = platform_get_drvdata(pdev); ++ ++ spi_bitbang_stop(&sp->bitbang); ++ iounmap(sp->base); ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(sp->bitbang.master); ++ ++ return 0; ++} ++ ++static struct platform_driver pb44_spi_drv = { ++ .probe = pb44_spi_probe, ++ .remove = pb44_spi_remove, ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init pb44_spi_init(void) ++{ ++ return platform_driver_register(&pb44_spi_drv); ++} ++module_init(pb44_spi_init); ++ ++static void __exit pb44_spi_exit(void) ++{ ++ platform_driver_unregister(&pb44_spi_drv); ++} ++module_exit(pb44_spi_exit); ++ ++MODULE_ALIAS("platform:" DRV_NAME); ++MODULE_DESCRIPTION(DRV_DESC); ++MODULE_VERSION(DRV_VERSION); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_LICENSE("GPL v2"); +diff -Nur linux-2.6.39.orig/drivers/spi/rb4xx_spi.c linux-2.6.39/drivers/spi/rb4xx_spi.c +--- linux-2.6.39.orig/drivers/spi/rb4xx_spi.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/spi/rb4xx_spi.c 2011-04-27 12:19:22.307664943 +0200 +@@ -0,0 +1,474 @@ ++/* ++ * SPI controller driver for the Mikrotik RB4xx boards ++ * ++ * Copyright (C) 2010 Gabor Juhos ++ * ++ * This file was based on the patches for Linux 2.6.27.39 published by ++ * MikroTik for their RouterBoard 4xx series devices. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define DRV_NAME "rb4xx-spi" ++#define DRV_DESC "Mikrotik RB4xx SPI controller driver" ++#define DRV_VERSION "0.1.0" ++ ++#define SPI_CTRL_FASTEST 0x40 ++#define SPI_FLASH_HZ 33333334 ++#define SPI_CPLD_HZ 33333334 ++ ++#define CPLD_CMD_READ_FAST 0x0b ++ ++#undef RB4XX_SPI_DEBUG ++ ++struct rb4xx_spi { ++ void __iomem *base; ++ struct spi_master *master; ++ ++ unsigned spi_ctrl_flash; ++ unsigned spi_ctrl_fread; ++ ++ spinlock_t lock; ++ struct list_head queue; ++ int busy:1; ++ int cs_wait; ++}; ++ ++static unsigned spi_clk_low = SPI_IOC_CS1; ++ ++#ifdef RB4XX_SPI_DEBUG ++static inline void do_spi_delay(void) ++{ ++ ndelay(20000); ++} ++#else ++static inline void do_spi_delay(void) { } ++#endif ++ ++static inline void do_spi_init(struct spi_device *spi) ++{ ++ unsigned cs = SPI_IOC_CS0 | SPI_IOC_CS1; ++ ++ if (!(spi->mode & SPI_CS_HIGH)) ++ cs ^= (spi->chip_select == 2) ? SPI_IOC_CS1 : SPI_IOC_CS0; ++ ++ spi_clk_low = cs; ++} ++ ++static inline void do_spi_finish(void __iomem *base) ++{ ++ do_spi_delay(); ++ __raw_writel(SPI_IOC_CS0 | SPI_IOC_CS1, base + SPI_REG_IOC); ++} ++ ++static inline void do_spi_clk(void __iomem *base, int bit) ++{ ++ unsigned bval = spi_clk_low | ((bit & 1) ? SPI_IOC_DO : 0); ++ ++ do_spi_delay(); ++ __raw_writel(bval, base + SPI_REG_IOC); ++ do_spi_delay(); ++ __raw_writel(bval | SPI_IOC_CLK, base + SPI_REG_IOC); ++} ++ ++static void do_spi_byte(void __iomem *base, unsigned char byte) ++{ ++ do_spi_clk(base, byte >> 7); ++ do_spi_clk(base, byte >> 6); ++ do_spi_clk(base, byte >> 5); ++ do_spi_clk(base, byte >> 4); ++ do_spi_clk(base, byte >> 3); ++ do_spi_clk(base, byte >> 2); ++ do_spi_clk(base, byte >> 1); ++ do_spi_clk(base, byte); ++ ++ pr_debug("spi_byte sent 0x%02x got 0x%02x\n", ++ (unsigned)byte, ++ (unsigned char)__raw_readl(base + SPI_REG_RDS)); ++} ++ ++static inline void do_spi_clk_fast(void __iomem *base, unsigned bit1, ++ unsigned bit2) ++{ ++ unsigned bval = (spi_clk_low | ++ ((bit1 & 1) ? SPI_IOC_DO : 0) | ++ ((bit2 & 1) ? SPI_IOC_CS2 : 0)); ++ do_spi_delay(); ++ __raw_writel(bval, base + SPI_REG_IOC); ++ do_spi_delay(); ++ __raw_writel(bval | SPI_IOC_CLK, base + SPI_REG_IOC); ++} ++ ++static void do_spi_byte_fast(void __iomem *base, unsigned char byte) ++{ ++ do_spi_clk_fast(base, byte >> 7, byte >> 6); ++ do_spi_clk_fast(base, byte >> 5, byte >> 4); ++ do_spi_clk_fast(base, byte >> 3, byte >> 2); ++ do_spi_clk_fast(base, byte >> 1, byte >> 0); ++ ++ pr_debug("spi_byte_fast sent 0x%02x got 0x%02x\n", ++ (unsigned)byte, ++ (unsigned char) __raw_readl(base + SPI_REG_RDS)); ++} ++ ++static int rb4xx_spi_txrx(void __iomem *base, struct spi_transfer *t) ++{ ++ const unsigned char *rxv_ptr = NULL; ++ const unsigned char *tx_ptr = t->tx_buf; ++ unsigned char *rx_ptr = t->rx_buf; ++ unsigned i; ++ ++ pr_debug("spi_txrx len %u tx %u rx %u\n", ++ t->len, ++ (t->tx_buf ? 1 : 0), ++ (t->rx_buf ? 1 : 0)); ++ ++ if (t->verify) { ++ rxv_ptr = tx_ptr; ++ tx_ptr = NULL; ++ } ++ ++ for (i = 0; i < t->len; ++i) { ++ unsigned char sdata = tx_ptr ? tx_ptr[i] : 0; ++ ++ if (t->fast_write) ++ do_spi_byte_fast(base, sdata); ++ else ++ do_spi_byte(base, sdata); ++ ++ if (rx_ptr) { ++ rx_ptr[i] = __raw_readl(base + SPI_REG_RDS) & 0xff; ++ } else if (rxv_ptr) { ++ unsigned char c = __raw_readl(base + SPI_REG_RDS); ++ if (rxv_ptr[i] != c) ++ return i; ++ } ++ } ++ ++ return i; ++} ++ ++static int rb4xx_spi_read_fast(struct rb4xx_spi *rbspi, ++ struct spi_message *m) ++{ ++ struct spi_transfer *t; ++ const unsigned char *tx_ptr; ++ unsigned addr; ++ void __iomem *base = rbspi->base; ++ ++ /* check for exactly two transfers */ ++ if (list_empty(&m->transfers) || ++ list_is_last(m->transfers.next, &m->transfers) || ++ !list_is_last(m->transfers.next->next, &m->transfers)) { ++ return -1; ++ } ++ ++ /* first transfer contains command and address */ ++ t = list_entry(m->transfers.next, ++ struct spi_transfer, transfer_list); ++ ++ if (t->len != 5 || t->tx_buf == NULL) ++ return -1; ++ ++ tx_ptr = t->tx_buf; ++ if (tx_ptr[0] != CPLD_CMD_READ_FAST) ++ return -1; ++ ++ addr = tx_ptr[1]; ++ addr = tx_ptr[2] | (addr << 8); ++ addr = tx_ptr[3] | (addr << 8); ++ addr += (unsigned) base; ++ ++ m->actual_length += t->len; ++ ++ /* second transfer contains data itself */ ++ t = list_entry(m->transfers.next->next, ++ struct spi_transfer, transfer_list); ++ ++ if (t->tx_buf && !t->verify) ++ return -1; ++ ++ __raw_writel(SPI_FS_GPIO, base + SPI_REG_FS); ++ __raw_writel(rbspi->spi_ctrl_fread, base + SPI_REG_CTRL); ++ __raw_writel(0, base + SPI_REG_FS); ++ ++ if (t->rx_buf) { ++ memcpy(t->rx_buf, (const void *)addr, t->len); ++ } else if (t->tx_buf) { ++ unsigned char buf[t->len]; ++ memcpy(buf, (const void *)addr, t->len); ++ if (memcmp(t->tx_buf, buf, t->len) != 0) ++ m->status = -EMSGSIZE; ++ } ++ m->actual_length += t->len; ++ ++ if (rbspi->spi_ctrl_flash != rbspi->spi_ctrl_fread) { ++ __raw_writel(SPI_FS_GPIO, base + SPI_REG_FS); ++ __raw_writel(rbspi->spi_ctrl_flash, base + SPI_REG_CTRL); ++ __raw_writel(0, base + SPI_REG_FS); ++ } ++ ++ return 0; ++} ++ ++static int rb4xx_spi_msg(struct rb4xx_spi *rbspi, struct spi_message *m) ++{ ++ struct spi_transfer *t = NULL; ++ void __iomem *base = rbspi->base; ++ ++ m->status = 0; ++ if (list_empty(&m->transfers)) ++ return -1; ++ ++ if (m->fast_read) ++ if (rb4xx_spi_read_fast(rbspi, m) == 0) ++ return -1; ++ ++ __raw_writel(SPI_FS_GPIO, base + SPI_REG_FS); ++ __raw_writel(SPI_CTRL_FASTEST, base + SPI_REG_CTRL); ++ do_spi_init(m->spi); ++ ++ list_for_each_entry(t, &m->transfers, transfer_list) { ++ int len; ++ ++ len = rb4xx_spi_txrx(base, t); ++ if (len != t->len) { ++ m->status = -EMSGSIZE; ++ break; ++ } ++ m->actual_length += len; ++ ++ if (t->cs_change) { ++ if (list_is_last(&t->transfer_list, &m->transfers)) { ++ /* wait for continuation */ ++ return m->spi->chip_select; ++ } ++ do_spi_finish(base); ++ ndelay(100); ++ } ++ } ++ ++ do_spi_finish(base); ++ __raw_writel(rbspi->spi_ctrl_flash, base + SPI_REG_CTRL); ++ __raw_writel(0, base + SPI_REG_FS); ++ return -1; ++} ++ ++static void rb4xx_spi_process_queue_locked(struct rb4xx_spi *rbspi, ++ unsigned long *flags) ++{ ++ int cs = rbspi->cs_wait; ++ ++ rbspi->busy = 1; ++ while (!list_empty(&rbspi->queue)) { ++ struct spi_message *m; ++ ++ list_for_each_entry(m, &rbspi->queue, queue) ++ if (cs < 0 || cs == m->spi->chip_select) ++ break; ++ ++ if (&m->queue == &rbspi->queue) ++ break; ++ ++ list_del_init(&m->queue); ++ spin_unlock_irqrestore(&rbspi->lock, *flags); ++ ++ cs = rb4xx_spi_msg(rbspi, m); ++ m->complete(m->context); ++ ++ spin_lock_irqsave(&rbspi->lock, *flags); ++ } ++ ++ rbspi->cs_wait = cs; ++ rbspi->busy = 0; ++ ++ if (cs >= 0) { ++ /* TODO: add timer to unlock cs after 1s inactivity */ ++ } ++} ++ ++static int rb4xx_spi_transfer(struct spi_device *spi, ++ struct spi_message *m) ++{ ++ struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master); ++ unsigned long flags; ++ ++ m->actual_length = 0; ++ m->status = -EINPROGRESS; ++ ++ spin_lock_irqsave(&rbspi->lock, flags); ++ list_add_tail(&m->queue, &rbspi->queue); ++ if (rbspi->busy || ++ (rbspi->cs_wait >= 0 && rbspi->cs_wait != m->spi->chip_select)) { ++ /* job will be done later */ ++ spin_unlock_irqrestore(&rbspi->lock, flags); ++ return 0; ++ } ++ ++ /* process job in current context */ ++ rb4xx_spi_process_queue_locked(rbspi, &flags); ++ spin_unlock_irqrestore(&rbspi->lock, flags); ++ ++ return 0; ++} ++ ++static int rb4xx_spi_setup(struct spi_device *spi) ++{ ++ struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master); ++ unsigned long flags; ++ ++ if (spi->mode & ~(SPI_CS_HIGH)) { ++ dev_err(&spi->dev, "mode %x not supported\n", ++ (unsigned) spi->mode); ++ return -EINVAL; ++ } ++ ++ if (spi->bits_per_word != 8 && spi->bits_per_word != 0) { ++ dev_err(&spi->dev, "bits_per_word %u not supported\n", ++ (unsigned) spi->bits_per_word); ++ return -EINVAL; ++ } ++ ++ spin_lock_irqsave(&rbspi->lock, flags); ++ if (rbspi->cs_wait == spi->chip_select && !rbspi->busy) { ++ rbspi->cs_wait = -1; ++ rb4xx_spi_process_queue_locked(rbspi, &flags); ++ } ++ spin_unlock_irqrestore(&rbspi->lock, flags); ++ ++ return 0; ++} ++ ++static unsigned get_spi_ctrl(unsigned hz_max, const char *name) ++{ ++ unsigned div; ++ ++ div = (ar71xx_ahb_freq - 1) / (2 * hz_max); ++ ++ /* ++ * CPU has a bug at (div == 0) - first bit read is random ++ */ ++ if (div == 0) ++ ++div; ++ ++ if (name) { ++ unsigned ahb_khz = (ar71xx_ahb_freq + 500) / 1000; ++ unsigned div_real = 2 * (div + 1); ++ pr_debug("rb4xx: %s SPI clock %u kHz (AHB %u kHz / %u)\n", ++ name, ++ ahb_khz / div_real, ++ ahb_khz, div_real); ++ } ++ ++ return SPI_CTRL_FASTEST + div; ++} ++ ++static int rb4xx_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct rb4xx_spi *rbspi; ++ struct resource *r; ++ int err = 0; ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(*rbspi)); ++ if (master == NULL) { ++ dev_err(&pdev->dev, "no memory for spi_master\n"); ++ err = -ENOMEM; ++ goto err_out; ++ } ++ ++ master->bus_num = 0; ++ master->num_chipselect = 3; ++ master->setup = rb4xx_spi_setup; ++ master->transfer = rb4xx_spi_transfer; ++ ++ rbspi = spi_master_get_devdata(master); ++ platform_set_drvdata(pdev, rbspi); ++ ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (r == NULL) { ++ err = -ENOENT; ++ goto err_put_master; ++ } ++ ++ rbspi->base = ioremap(r->start, r->end - r->start + 1); ++ if (!rbspi->base) { ++ err = -ENXIO; ++ goto err_put_master; ++ } ++ ++ rbspi->master = master; ++ rbspi->spi_ctrl_flash = get_spi_ctrl(SPI_FLASH_HZ, "FLASH"); ++ rbspi->spi_ctrl_fread = get_spi_ctrl(SPI_CPLD_HZ, "CPLD"); ++ rbspi->cs_wait = -1; ++ ++ spin_lock_init(&rbspi->lock); ++ INIT_LIST_HEAD(&rbspi->queue); ++ ++ err = spi_register_master(master); ++ if (err) { ++ dev_err(&pdev->dev, "failed to register SPI master\n"); ++ goto err_iounmap; ++ } ++ ++ return 0; ++ ++err_iounmap: ++ iounmap(rbspi->base); ++err_put_master: ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(master); ++err_out: ++ return err; ++} ++ ++static int rb4xx_spi_remove(struct platform_device *pdev) ++{ ++ struct rb4xx_spi *rbspi = platform_get_drvdata(pdev); ++ ++ iounmap(rbspi->base); ++ platform_set_drvdata(pdev, NULL); ++ spi_master_put(rbspi->master); ++ ++ return 0; ++} ++ ++static struct platform_driver rb4xx_spi_drv = { ++ .probe = rb4xx_spi_probe, ++ .remove = rb4xx_spi_remove, ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init rb4xx_spi_init(void) ++{ ++ return platform_driver_register(&rb4xx_spi_drv); ++} ++subsys_initcall(rb4xx_spi_init); ++ ++static void __exit rb4xx_spi_exit(void) ++{ ++ platform_driver_unregister(&rb4xx_spi_drv); ++} ++ ++module_exit(rb4xx_spi_exit); ++ ++MODULE_DESCRIPTION(DRV_DESC); ++MODULE_VERSION(DRV_VERSION); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_LICENSE("GPL v2"); +diff -Nur linux-2.6.39.orig/drivers/spi/spi_rb4xx_cpld.c linux-2.6.39/drivers/spi/spi_rb4xx_cpld.c +--- linux-2.6.39.orig/drivers/spi/spi_rb4xx_cpld.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/spi/spi_rb4xx_cpld.c 2011-04-27 12:19:22.317665385 +0200 +@@ -0,0 +1,440 @@ ++/* ++ * SPI driver for the CPLD chip on the Mikrotik RB4xx boards ++ * ++ * Copyright (C) 2010 Gabor Juhos ++ * ++ * This file was based on the patches for Linux 2.6.27.39 published by ++ * MikroTik for their RouterBoard 4xx series devices. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define DRV_NAME "spi-rb4xx-cpld" ++#define DRV_DESC "RB4xx CPLD driver" ++#define DRV_VERSION "0.1.0" ++ ++#define CPLD_CMD_WRITE_NAND 0x08 /* send cmd, n x send data, send indle */ ++#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */ ++#define CPLD_CMD_READ_NAND 0x0a /* send cmd, send idle, n x read data */ ++#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */ ++#define CPLD_CMD_LED5_ON 0x0c /* send cmd */ ++#define CPLD_CMD_LED5_OFF 0x0d /* send cmd */ ++ ++struct rb4xx_cpld { ++ struct spi_device *spi; ++ struct mutex lock; ++ struct gpio_chip chip; ++ unsigned int config; ++}; ++ ++static struct rb4xx_cpld *rb4xx_cpld; ++ ++static inline struct rb4xx_cpld *gpio_to_cpld(struct gpio_chip *chip) ++{ ++ return container_of(chip, struct rb4xx_cpld, chip); ++} ++ ++static int rb4xx_cpld_write_cmd(struct rb4xx_cpld *cpld, unsigned char cmd) ++{ ++ struct spi_transfer t[1]; ++ struct spi_message m; ++ unsigned char tx_buf[1]; ++ int err; ++ ++ spi_message_init(&m); ++ memset(&t, 0, sizeof(t)); ++ ++ t[0].tx_buf = tx_buf; ++ t[0].len = sizeof(tx_buf); ++ spi_message_add_tail(&t[0], &m); ++ ++ tx_buf[0] = cmd; ++ ++ err = spi_sync(cpld->spi, &m); ++ return err; ++} ++ ++static int rb4xx_cpld_write_cfg(struct rb4xx_cpld *cpld, unsigned char config) ++{ ++ struct spi_transfer t[1]; ++ struct spi_message m; ++ unsigned char cmd[2]; ++ int err; ++ ++ spi_message_init(&m); ++ memset(&t, 0, sizeof(t)); ++ ++ t[0].tx_buf = cmd; ++ t[0].len = sizeof(cmd); ++ spi_message_add_tail(&t[0], &m); ++ ++ cmd[0] = CPLD_CMD_WRITE_CFG; ++ cmd[1] = config; ++ ++ err = spi_sync(cpld->spi, &m); ++ return err; ++} ++ ++static int __rb4xx_cpld_change_cfg(struct rb4xx_cpld *cpld, unsigned mask, ++ unsigned value) ++{ ++ unsigned int config; ++ int err; ++ ++ config = cpld->config & ~mask; ++ config |= value; ++ ++ if ((cpld->config ^ config) & 0xff) { ++ err = rb4xx_cpld_write_cfg(cpld, config); ++ if (err) ++ return err; ++ } ++ ++ if ((cpld->config ^ config) & CPLD_CFG_nLED5) { ++ err = rb4xx_cpld_write_cmd(cpld, (value) ? CPLD_CMD_LED5_ON : ++ CPLD_CMD_LED5_OFF); ++ if (err) ++ return err; ++ } ++ ++ cpld->config = config; ++ return 0; ++} ++ ++int rb4xx_cpld_change_cfg(unsigned mask, unsigned value) ++{ ++ int ret; ++ ++ if (rb4xx_cpld == NULL) ++ return -ENODEV; ++ ++ mutex_lock(&rb4xx_cpld->lock); ++ ret = __rb4xx_cpld_change_cfg(rb4xx_cpld, mask, value); ++ mutex_unlock(&rb4xx_cpld->lock); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(rb4xx_cpld_change_cfg); ++ ++int rb4xx_cpld_read_from(unsigned addr, unsigned char *rx_buf, ++ const unsigned char *verify_buf, unsigned count) ++{ ++ const unsigned char cmd[5] = { ++ CPLD_CMD_READ_FAST, ++ (addr >> 16) & 0xff, ++ (addr >> 8) & 0xff, ++ addr & 0xff, ++ 0 ++ }; ++ struct spi_transfer t[2] = { ++ { ++ .tx_buf = &cmd, ++ .len = 5, ++ }, ++ { ++ .tx_buf = verify_buf, ++ .rx_buf = rx_buf, ++ .len = count, ++ .verify = (verify_buf != NULL), ++ }, ++ }; ++ struct spi_message m; ++ ++ if (rb4xx_cpld == NULL) ++ return -ENODEV; ++ ++ spi_message_init(&m); ++ m.fast_read = 1; ++ spi_message_add_tail(&t[0], &m); ++ spi_message_add_tail(&t[1], &m); ++ return spi_sync(rb4xx_cpld->spi, &m); ++} ++EXPORT_SYMBOL_GPL(rb4xx_cpld_read_from); ++ ++#if 0 ++int rb4xx_cpld_read(unsigned char *buf, unsigned char *verify_buf, ++ unsigned count) ++{ ++ struct spi_transfer t[2]; ++ struct spi_message m; ++ unsigned char cmd[2]; ++ ++ if (rb4xx_cpld == NULL) ++ return -ENODEV; ++ ++ spi_message_init(&m); ++ memset(&t, 0, sizeof(t)); ++ ++ /* send command */ ++ t[0].tx_buf = cmd; ++ t[0].len = sizeof(cmd); ++ spi_message_add_tail(&t[0], &m); ++ ++ cmd[0] = CPLD_CMD_READ_NAND; ++ cmd[1] = 0; ++ ++ /* read data */ ++ t[1].rx_buf = buf; ++ t[1].len = count; ++ spi_message_add_tail(&t[1], &m); ++ ++ return spi_sync(rb4xx_cpld->spi, &m); ++} ++#else ++int rb4xx_cpld_read(unsigned char *rx_buf, const unsigned char *verify_buf, ++ unsigned count) ++{ ++ static const unsigned char cmd[2] = { CPLD_CMD_READ_NAND, 0 }; ++ struct spi_transfer t[2] = { ++ { ++ .tx_buf = &cmd, ++ .len = 2, ++ }, { ++ .tx_buf = verify_buf, ++ .rx_buf = rx_buf, ++ .len = count, ++ .verify = (verify_buf != NULL), ++ }, ++ }; ++ struct spi_message m; ++ ++ if (rb4xx_cpld == NULL) ++ return -ENODEV; ++ ++ spi_message_init(&m); ++ spi_message_add_tail(&t[0], &m); ++ spi_message_add_tail(&t[1], &m); ++ return spi_sync(rb4xx_cpld->spi, &m); ++} ++#endif ++EXPORT_SYMBOL_GPL(rb4xx_cpld_read); ++ ++int rb4xx_cpld_write(const unsigned char *buf, unsigned count) ++{ ++#if 0 ++ struct spi_transfer t[3]; ++ struct spi_message m; ++ unsigned char cmd[1]; ++ ++ if (rb4xx_cpld == NULL) ++ return -ENODEV; ++ ++ memset(&t, 0, sizeof(t)); ++ spi_message_init(&m); ++ ++ /* send command */ ++ t[0].tx_buf = cmd; ++ t[0].len = sizeof(cmd); ++ spi_message_add_tail(&t[0], &m); ++ ++ cmd[0] = CPLD_CMD_WRITE_NAND; ++ ++ /* write data */ ++ t[1].tx_buf = buf; ++ t[1].len = count; ++ spi_message_add_tail(&t[1], &m); ++ ++ /* send idle */ ++ t[2].len = 1; ++ spi_message_add_tail(&t[2], &m); ++ ++ return spi_sync(rb4xx_cpld->spi, &m); ++#else ++ static const unsigned char cmd = CPLD_CMD_WRITE_NAND; ++ struct spi_transfer t[3] = { ++ { ++ .tx_buf = &cmd, ++ .len = 1, ++ }, { ++ .tx_buf = buf, ++ .len = count, ++ .fast_write = 1, ++ }, { ++ .len = 1, ++ .fast_write = 1, ++ }, ++ }; ++ struct spi_message m; ++ ++ if (rb4xx_cpld == NULL) ++ return -ENODEV; ++ ++ spi_message_init(&m); ++ spi_message_add_tail(&t[0], &m); ++ spi_message_add_tail(&t[1], &m); ++ spi_message_add_tail(&t[2], &m); ++ return spi_sync(rb4xx_cpld->spi, &m); ++#endif ++} ++EXPORT_SYMBOL_GPL(rb4xx_cpld_write); ++ ++static int rb4xx_cpld_gpio_get(struct gpio_chip *chip, unsigned offset) ++{ ++ struct rb4xx_cpld *cpld = gpio_to_cpld(chip); ++ int ret; ++ ++ mutex_lock(&cpld->lock); ++ ret = (cpld->config >> offset) & 1; ++ mutex_unlock(&cpld->lock); ++ ++ return ret; ++} ++ ++static void rb4xx_cpld_gpio_set(struct gpio_chip *chip, unsigned offset, ++ int value) ++{ ++ struct rb4xx_cpld *cpld = gpio_to_cpld(chip); ++ ++ mutex_lock(&cpld->lock); ++ __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset); ++ mutex_unlock(&cpld->lock); ++} ++ ++static int rb4xx_cpld_gpio_direction_input(struct gpio_chip *chip, ++ unsigned offset) ++{ ++ return -EOPNOTSUPP; ++} ++ ++static int rb4xx_cpld_gpio_direction_output(struct gpio_chip *chip, ++ unsigned offset, ++ int value) ++{ ++ struct rb4xx_cpld *cpld = gpio_to_cpld(chip); ++ int ret; ++ ++ mutex_lock(&cpld->lock); ++ ret = __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset); ++ mutex_unlock(&cpld->lock); ++ ++ return ret; ++} ++ ++static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base) ++{ ++ int err; ++ ++ /* init config */ ++ cpld->config = CPLD_CFG_nLED1 | CPLD_CFG_nLED2 | CPLD_CFG_nLED3 | ++ CPLD_CFG_nLED4 | CPLD_CFG_nCE; ++ rb4xx_cpld_write_cfg(cpld, cpld->config); ++ ++ /* setup GPIO chip */ ++ cpld->chip.label = DRV_NAME; ++ ++ cpld->chip.get = rb4xx_cpld_gpio_get; ++ cpld->chip.set = rb4xx_cpld_gpio_set; ++ cpld->chip.direction_input = rb4xx_cpld_gpio_direction_input; ++ cpld->chip.direction_output = rb4xx_cpld_gpio_direction_output; ++ ++ cpld->chip.base = base; ++ cpld->chip.ngpio = CPLD_NUM_GPIOS; ++ cpld->chip.can_sleep = 1; ++ cpld->chip.dev = &cpld->spi->dev; ++ cpld->chip.owner = THIS_MODULE; ++ ++ err = gpiochip_add(&cpld->chip); ++ if (err) ++ dev_err(&cpld->spi->dev, "adding GPIO chip failed, err=%d\n", ++ err); ++ ++ return err; ++} ++ ++static int __devinit rb4xx_cpld_probe(struct spi_device *spi) ++{ ++ struct rb4xx_cpld *cpld; ++ struct rb4xx_cpld_platform_data *pdata; ++ int err; ++ ++ pdata = spi->dev.platform_data; ++ if (!pdata) { ++ dev_dbg(&spi->dev, "no platform data\n"); ++ return -EINVAL; ++ } ++ ++ cpld = kzalloc(sizeof(*cpld), GFP_KERNEL); ++ if (!cpld) { ++ dev_err(&spi->dev, "no memory for private data\n"); ++ return -ENOMEM; ++ } ++ ++ mutex_init(&cpld->lock); ++ cpld->spi = spi_dev_get(spi); ++ dev_set_drvdata(&spi->dev, cpld); ++ ++ spi->mode = SPI_MODE_0; ++ spi->bits_per_word = 8; ++ err = spi_setup(spi); ++ if (err) { ++ dev_err(&spi->dev, "spi_setup failed, err=%d\n", err); ++ goto err_drvdata; ++ } ++ ++ err = rb4xx_cpld_gpio_init(cpld, pdata->gpio_base); ++ if (err) ++ goto err_drvdata; ++ ++ rb4xx_cpld = cpld; ++ ++ return 0; ++ ++err_drvdata: ++ dev_set_drvdata(&spi->dev, NULL); ++ kfree(cpld); ++ ++ return err; ++} ++ ++static int __devexit rb4xx_cpld_remove(struct spi_device *spi) ++{ ++ struct rb4xx_cpld *cpld; ++ ++ rb4xx_cpld = NULL; ++ cpld = dev_get_drvdata(&spi->dev); ++ dev_set_drvdata(&spi->dev, NULL); ++ kfree(cpld); ++ ++ return 0; ++} ++ ++static struct spi_driver rb4xx_cpld_driver = { ++ .driver = { ++ .name = DRV_NAME, ++ .bus = &spi_bus_type, ++ .owner = THIS_MODULE, ++ }, ++ .probe = rb4xx_cpld_probe, ++ .remove = __devexit_p(rb4xx_cpld_remove), ++}; ++ ++static int __init rb4xx_cpld_init(void) ++{ ++ return spi_register_driver(&rb4xx_cpld_driver); ++} ++module_init(rb4xx_cpld_init); ++ ++static void __exit rb4xx_cpld_exit(void) ++{ ++ spi_unregister_driver(&rb4xx_cpld_driver); ++} ++module_exit(rb4xx_cpld_exit); ++ ++MODULE_DESCRIPTION(DRV_DESC); ++MODULE_VERSION(DRV_VERSION); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_LICENSE("GPL v2"); +diff -Nur linux-2.6.39.orig/drivers/spi/spi_vsc7385.c linux-2.6.39/drivers/spi/spi_vsc7385.c +--- linux-2.6.39.orig/drivers/spi/spi_vsc7385.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/spi/spi_vsc7385.c 2011-04-27 12:19:22.317665385 +0200 +@@ -0,0 +1,621 @@ ++/* ++ * SPI driver for the Vitesse VSC7385 ethernet switch ++ * ++ * Copyright (C) 2009 Gabor Juhos ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRV_NAME "spi-vsc7385" ++#define DRV_DESC "Vitesse VSC7385 Gbit ethernet switch driver" ++#define DRV_VERSION "0.1.0" ++ ++#define VSC73XX_BLOCK_MAC 0x1 ++#define VSC73XX_BLOCK_2 0x2 ++#define VSC73XX_BLOCK_MII 0x3 ++#define VSC73XX_BLOCK_4 0x4 ++#define VSC73XX_BLOCK_5 0x5 ++#define VSC73XX_BLOCK_SYSTEM 0x7 ++ ++#define VSC73XX_SUBBLOCK_PORT_0 0 ++#define VSC73XX_SUBBLOCK_PORT_1 1 ++#define VSC73XX_SUBBLOCK_PORT_2 2 ++#define VSC73XX_SUBBLOCK_PORT_3 3 ++#define VSC73XX_SUBBLOCK_PORT_4 4 ++#define VSC73XX_SUBBLOCK_PORT_MAC 6 ++ ++/* MAC Block registers */ ++#define VSC73XX_MAC_CFG 0x0 ++#define VSC73XX_ADVPORTM 0x19 ++#define VSC73XX_RXOCT 0x50 ++#define VSC73XX_TXOCT 0x51 ++#define VSC73XX_C_RX0 0x52 ++#define VSC73XX_C_RX1 0x53 ++#define VSC73XX_C_RX2 0x54 ++#define VSC73XX_C_TX0 0x55 ++#define VSC73XX_C_TX1 0x56 ++#define VSC73XX_C_TX2 0x57 ++#define VSC73XX_C_CFG 0x58 ++ ++/* MAC_CFG register bits */ ++#define VSC73XX_MAC_CFG_WEXC_DIS (1 << 31) ++#define VSC73XX_MAC_CFG_PORT_RST (1 << 29) ++#define VSC73XX_MAC_CFG_TX_EN (1 << 28) ++#define VSC73XX_MAC_CFG_SEED_LOAD (1 << 27) ++#define VSC73XX_MAC_CFG_FDX (1 << 18) ++#define VSC73XX_MAC_CFG_GIGE (1 << 17) ++#define VSC73XX_MAC_CFG_RX_EN (1 << 16) ++#define VSC73XX_MAC_CFG_VLAN_DBLAWR (1 << 15) ++#define VSC73XX_MAC_CFG_VLAN_AWR (1 << 14) ++#define VSC73XX_MAC_CFG_100_BASE_T (1 << 13) ++#define VSC73XX_MAC_CFG_TX_IPG(x) (((x) & 0x1f) << 6) ++#define VSC73XX_MAC_CFG_MAC_RX_RST (1 << 5) ++#define VSC73XX_MAC_CFG_MAC_TX_RST (1 << 4) ++#define VSC73XX_MAC_CFG_BIT2 (1 << 2) ++#define VSC73XX_MAC_CFG_CLK_SEL(x) ((x) & 0x3) ++ ++/* ADVPORTM register bits */ ++#define VSC73XX_ADVPORTM_IFG_PPM (1 << 7) ++#define VSC73XX_ADVPORTM_EXC_COL_CONT (1 << 6) ++#define VSC73XX_ADVPORTM_EXT_PORT (1 << 5) ++#define VSC73XX_ADVPORTM_INV_GTX (1 << 4) ++#define VSC73XX_ADVPORTM_ENA_GTX (1 << 3) ++#define VSC73XX_ADVPORTM_DDR_MODE (1 << 2) ++#define VSC73XX_ADVPORTM_IO_LOOPBACK (1 << 1) ++#define VSC73XX_ADVPORTM_HOST_LOOPBACK (1 << 0) ++ ++/* MII Block registers */ ++#define VSC73XX_MII_STAT 0x0 ++#define VSC73XX_MII_CMD 0x1 ++#define VSC73XX_MII_DATA 0x2 ++ ++/* System Block registers */ ++#define VSC73XX_ICPU_SIPAD 0x01 ++#define VSC73XX_ICPU_CLOCK_DELAY 0x05 ++#define VSC73XX_ICPU_CTRL 0x10 ++#define VSC73XX_ICPU_ADDR 0x11 ++#define VSC73XX_ICPU_SRAM 0x12 ++#define VSC73XX_ICPU_MBOX_VAL 0x15 ++#define VSC73XX_ICPU_MBOX_SET 0x16 ++#define VSC73XX_ICPU_MBOX_CLR 0x17 ++#define VSC73XX_ICPU_CHIPID 0x18 ++#define VSC73XX_ICPU_GPIO 0x34 ++ ++#define VSC73XX_ICPU_CTRL_CLK_DIV (1 << 8) ++#define VSC73XX_ICPU_CTRL_SRST_HOLD (1 << 7) ++#define VSC73XX_ICPU_CTRL_BOOT_EN (1 << 3) ++#define VSC73XX_ICPU_CTRL_EXT_ACC_EN (1 << 2) ++#define VSC73XX_ICPU_CTRL_CLK_EN (1 << 1) ++#define VSC73XX_ICPU_CTRL_SRST (1 << 0) ++ ++#define VSC73XX_ICPU_CHIPID_ID_SHIFT 12 ++#define VSC73XX_ICPU_CHIPID_ID_MASK 0xffff ++#define VSC73XX_ICPU_CHIPID_REV_SHIFT 28 ++#define VSC73XX_ICPU_CHIPID_REV_MASK 0xf ++#define VSC73XX_ICPU_CHIPID_ID_7385 0x7385 ++#define VSC73XX_ICPU_CHIPID_ID_7395 0x7395 ++ ++#define VSC73XX_CMD_MODE_READ 0 ++#define VSC73XX_CMD_MODE_WRITE 1 ++#define VSC73XX_CMD_MODE_SHIFT 4 ++#define VSC73XX_CMD_BLOCK_SHIFT 5 ++#define VSC73XX_CMD_BLOCK_MASK 0x7 ++#define VSC73XX_CMD_SUBBLOCK_MASK 0xf ++ ++#define VSC7385_CLOCK_DELAY ((3 << 4) | 3) ++#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3) ++ ++#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \ ++ VSC73XX_ICPU_CTRL_BOOT_EN | \ ++ VSC73XX_ICPU_CTRL_EXT_ACC_EN) ++ ++#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \ ++ VSC73XX_ICPU_CTRL_BOOT_EN | \ ++ VSC73XX_ICPU_CTRL_CLK_EN | \ ++ VSC73XX_ICPU_CTRL_SRST) ++ ++#define VSC7385_ADVPORTM_MASK (VSC73XX_ADVPORTM_IFG_PPM | \ ++ VSC73XX_ADVPORTM_EXC_COL_CONT | \ ++ VSC73XX_ADVPORTM_EXT_PORT | \ ++ VSC73XX_ADVPORTM_INV_GTX | \ ++ VSC73XX_ADVPORTM_ENA_GTX | \ ++ VSC73XX_ADVPORTM_DDR_MODE | \ ++ VSC73XX_ADVPORTM_IO_LOOPBACK | \ ++ VSC73XX_ADVPORTM_HOST_LOOPBACK) ++ ++#define VSC7385_ADVPORTM_INIT (VSC73XX_ADVPORTM_EXT_PORT | \ ++ VSC73XX_ADVPORTM_ENA_GTX | \ ++ VSC73XX_ADVPORTM_DDR_MODE) ++ ++#define VSC7385_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \ ++ VSC73XX_MAC_CFG_MAC_RX_RST | \ ++ VSC73XX_MAC_CFG_MAC_TX_RST) ++ ++#define VSC73XX_MAC_CFG_INIT (VSC73XX_MAC_CFG_TX_EN | \ ++ VSC73XX_MAC_CFG_FDX | \ ++ VSC73XX_MAC_CFG_GIGE | \ ++ VSC73XX_MAC_CFG_RX_EN) ++ ++#define VSC73XX_RESET_DELAY 100 ++ ++struct vsc7385 { ++ struct spi_device *spi; ++ struct mutex lock; ++ struct vsc7385_platform_data *pdata; ++}; ++ ++static int vsc7385_is_addr_valid(u8 block, u8 subblock) ++{ ++ switch (block) { ++ case VSC73XX_BLOCK_MAC: ++ switch (subblock) { ++ case 0 ... 4: ++ case 6: ++ return 1; ++ } ++ break; ++ ++ case VSC73XX_BLOCK_2: ++ case VSC73XX_BLOCK_SYSTEM: ++ switch (subblock) { ++ case 0: ++ return 1; ++ } ++ break; ++ ++ case VSC73XX_BLOCK_MII: ++ case VSC73XX_BLOCK_4: ++ case VSC73XX_BLOCK_5: ++ switch (subblock) { ++ case 0 ... 1: ++ return 1; ++ } ++ break; ++ } ++ ++ return 0; ++} ++ ++static inline u8 vsc7385_make_addr(u8 mode, u8 block, u8 subblock) ++{ ++ u8 ret; ++ ++ ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT; ++ ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT; ++ ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK; ++ ++ return ret; ++} ++ ++static int vsc7385_read(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg, ++ u32 *value) ++{ ++ u8 cmd[4]; ++ u8 buf[4]; ++ struct spi_transfer t[2]; ++ struct spi_message m; ++ int err; ++ ++ if (!vsc7385_is_addr_valid(block, subblock)) ++ return -EINVAL; ++ ++ spi_message_init(&m); ++ ++ memset(&t, 0, sizeof(t)); ++ ++ t[0].tx_buf = cmd; ++ t[0].len = sizeof(cmd); ++ spi_message_add_tail(&t[0], &m); ++ ++ t[1].rx_buf = buf; ++ t[1].len = sizeof(buf); ++ spi_message_add_tail(&t[1], &m); ++ ++ cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_READ, block, subblock); ++ cmd[1] = reg; ++ cmd[2] = 0; ++ cmd[3] = 0; ++ ++ mutex_lock(&vsc->lock); ++ err = spi_sync(vsc->spi, &m); ++ mutex_unlock(&vsc->lock); ++ ++ if (err) ++ return err; ++ ++ *value = (((u32) buf[0]) << 24) | (((u32) buf[1]) << 16) | ++ (((u32) buf[2]) << 8) | ((u32) buf[3]); ++ ++ return 0; ++} ++ ++ ++static int vsc7385_write(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg, ++ u32 value) ++{ ++ u8 cmd[2]; ++ u8 buf[4]; ++ struct spi_transfer t[2]; ++ struct spi_message m; ++ int err; ++ ++ if (!vsc7385_is_addr_valid(block, subblock)) ++ return -EINVAL; ++ ++ spi_message_init(&m); ++ ++ memset(&t, 0, sizeof(t)); ++ ++ t[0].tx_buf = cmd; ++ t[0].len = sizeof(cmd); ++ spi_message_add_tail(&t[0], &m); ++ ++ t[1].tx_buf = buf; ++ t[1].len = sizeof(buf); ++ spi_message_add_tail(&t[1], &m); ++ ++ cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock); ++ cmd[1] = reg; ++ ++ buf[0] = (value >> 24) & 0xff; ++ buf[1] = (value >> 16) & 0xff; ++ buf[2] = (value >> 8) & 0xff; ++ buf[3] = value & 0xff; ++ ++ mutex_lock(&vsc->lock); ++ err = spi_sync(vsc->spi, &m); ++ mutex_unlock(&vsc->lock); ++ ++ return err; ++} ++ ++static inline int vsc7385_write_verify(struct vsc7385 *vsc, u8 block, ++ u8 subblock, u8 reg, u32 value, ++ u32 read_mask, u32 read_val) ++{ ++ struct spi_device *spi = vsc->spi; ++ u32 t; ++ int err; ++ ++ err = vsc7385_write(vsc, block, subblock, reg, value); ++ if (err) ++ return err; ++ ++ err = vsc7385_read(vsc, block, subblock, reg, &t); ++ if (err) ++ return err; ++ ++ if ((t & read_mask) != read_val) { ++ dev_err(&spi->dev, "register write error\n"); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static inline int vsc7385_set_clock_delay(struct vsc7385 *vsc, u32 val) ++{ ++ return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, ++ VSC73XX_ICPU_CLOCK_DELAY, val); ++} ++ ++static inline int vsc7385_get_clock_delay(struct vsc7385 *vsc, u32 *val) ++{ ++ return vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, ++ VSC73XX_ICPU_CLOCK_DELAY, val); ++} ++ ++static inline int vsc7385_icpu_stop(struct vsc7385 *vsc) ++{ ++ return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL, ++ VSC73XX_ICPU_CTRL_STOP); ++} ++ ++static inline int vsc7385_icpu_start(struct vsc7385 *vsc) ++{ ++ return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL, ++ VSC73XX_ICPU_CTRL_START); ++} ++ ++static inline int vsc7385_icpu_reset(struct vsc7385 *vsc) ++{ ++ int rc; ++ ++ rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_ADDR, ++ 0x0000); ++ if (rc) ++ dev_err(&vsc->spi->dev, ++ "could not reset microcode, err=%d\n", rc); ++ ++ return rc; ++} ++ ++static int vsc7385_upload_ucode(struct vsc7385 *vsc) ++{ ++ struct spi_device *spi = vsc->spi; ++ const struct firmware *firmware; ++ char *ucode_name; ++ unsigned char *dp; ++ unsigned int curVal; ++ int i; ++ int diffs; ++ int rc; ++ ++ ucode_name = (vsc->pdata->ucode_name) ? vsc->pdata->ucode_name ++ : "vsc7385_ucode.bin"; ++ rc = request_firmware(&firmware, ucode_name, &spi->dev); ++ if (rc) { ++ dev_err(&spi->dev, "request_firmware failed, err=%d\n", ++ rc); ++ return rc; ++ } ++ ++ rc = vsc7385_icpu_stop(vsc); ++ if (rc) ++ goto out; ++ ++ rc = vsc7385_icpu_reset(vsc); ++ if (rc) ++ goto out; ++ ++ dev_info(&spi->dev, "uploading microcode...\n"); ++ ++ dp = (unsigned char *) firmware->data; ++ for (i = 0; i < firmware->size; i++) { ++ rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, ++ VSC73XX_ICPU_SRAM, *dp++); ++ if (rc) { ++ dev_err(&spi->dev, "could not load microcode, err=%d\n", ++ rc); ++ goto out; ++ } ++ } ++ ++ rc = vsc7385_icpu_reset(vsc); ++ if (rc) ++ goto out; ++ ++ dev_info(&spi->dev, "verifying microcode...\n"); ++ ++ dp = (unsigned char *) firmware->data; ++ diffs = 0; ++ for (i = 0; i < firmware->size; i++) { ++ rc = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, ++ VSC73XX_ICPU_SRAM, &curVal); ++ if (rc) { ++ dev_err(&spi->dev, "could not read microcode %d\n", ++ rc); ++ goto out; ++ } ++ ++ if (curVal > 0xff) { ++ dev_err(&spi->dev, "bad val read: %04x : %02x %02x\n", ++ i, *dp, curVal); ++ rc = -EIO; ++ goto out; ++ } ++ ++ if ((curVal & 0xff) != *dp) { ++ diffs++; ++ dev_err(&spi->dev, "verify error: %04x : %02x %02x\n", ++ i, *dp, curVal); ++ ++ if (diffs > 4) ++ break; ++ } ++ dp++; ++ } ++ ++ if (diffs) { ++ dev_err(&spi->dev, "microcode verification failed\n"); ++ rc = -EIO; ++ goto out; ++ } ++ ++ dev_info(&spi->dev, "microcode uploaded\n"); ++ ++ rc = vsc7385_icpu_start(vsc); ++ ++out: ++ release_firmware(firmware); ++ return rc; ++} ++ ++static int vsc7385_setup(struct vsc7385 *vsc) ++{ ++ struct vsc7385_platform_data *pdata = vsc->pdata; ++ u32 t; ++ int err; ++ ++ err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_SYSTEM, 0, ++ VSC73XX_ICPU_CLOCK_DELAY, ++ VSC7385_CLOCK_DELAY, ++ VSC7385_CLOCK_DELAY_MASK, ++ VSC7385_CLOCK_DELAY); ++ if (err) ++ goto err; ++ ++ err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_MAC, ++ VSC73XX_SUBBLOCK_PORT_MAC, VSC73XX_ADVPORTM, ++ VSC7385_ADVPORTM_INIT, ++ VSC7385_ADVPORTM_MASK, ++ VSC7385_ADVPORTM_INIT); ++ if (err) ++ goto err; ++ ++ err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC, ++ VSC73XX_MAC_CFG, VSC7385_MAC_CFG_RESET); ++ if (err) ++ goto err; ++ ++ t = VSC73XX_MAC_CFG_INIT; ++ t |= VSC73XX_MAC_CFG_TX_IPG(pdata->mac_cfg.tx_ipg); ++ t |= VSC73XX_MAC_CFG_CLK_SEL(pdata->mac_cfg.clk_sel); ++ if (pdata->mac_cfg.bit2) ++ t |= VSC73XX_MAC_CFG_BIT2; ++ ++ err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC, ++ VSC73XX_MAC_CFG, t); ++ if (err) ++ goto err; ++ ++ return 0; ++ ++err: ++ return err; ++} ++ ++static int vsc7385_detect(struct vsc7385 *vsc) ++{ ++ struct spi_device *spi = vsc->spi; ++ u32 t; ++ u32 id; ++ u32 rev; ++ int err; ++ ++ err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, ++ VSC73XX_ICPU_MBOX_VAL, &t); ++ if (err) { ++ dev_err(&spi->dev, "unable to read mailbox, err=%d\n", err); ++ return err; ++ } ++ ++ if (t == 0xffffffff) { ++ dev_dbg(&spi->dev, "assert chip reset\n"); ++ if (vsc->pdata->reset) ++ vsc->pdata->reset(); ++ ++ } ++ ++ err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, ++ VSC73XX_ICPU_CHIPID, &t); ++ if (err) { ++ dev_err(&spi->dev, "unable to read chip id, err=%d\n", err); ++ return err; ++ } ++ ++ id = (t >> VSC73XX_ICPU_CHIPID_ID_SHIFT) & VSC73XX_ICPU_CHIPID_ID_MASK; ++ switch (id) { ++ case VSC73XX_ICPU_CHIPID_ID_7385: ++ case VSC73XX_ICPU_CHIPID_ID_7395: ++ break; ++ default: ++ dev_err(&spi->dev, "unsupported chip, id=%04x\n", id); ++ return -ENODEV; ++ } ++ ++ rev = (t >> VSC73XX_ICPU_CHIPID_REV_SHIFT) & ++ VSC73XX_ICPU_CHIPID_REV_MASK; ++ dev_info(&spi->dev, "VSC%04X (rev. %d) switch found\n", id, rev); ++ ++ return 0; ++} ++ ++static int __devinit vsc7385_probe(struct spi_device *spi) ++{ ++ struct vsc7385 *vsc; ++ struct vsc7385_platform_data *pdata; ++ int err; ++ ++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION"\n"); ++ ++ pdata = spi->dev.platform_data; ++ if (!pdata) { ++ dev_err(&spi->dev, "no platform data specified\n"); ++ return -ENODEV; ++ } ++ ++ vsc = kzalloc(sizeof(*vsc), GFP_KERNEL); ++ if (!vsc) { ++ dev_err(&spi->dev, "no memory for private data\n"); ++ return -ENOMEM; ++ } ++ ++ mutex_init(&vsc->lock); ++ vsc->pdata = pdata; ++ vsc->spi = spi_dev_get(spi); ++ dev_set_drvdata(&spi->dev, vsc); ++ ++ spi->mode = SPI_MODE_0; ++ spi->bits_per_word = 8; ++ err = spi_setup(spi); ++ if (err) { ++ dev_err(&spi->dev, "spi_setup failed, err=%d\n", err); ++ goto err_drvdata; ++ } ++ ++ err = vsc7385_detect(vsc); ++ if (err) { ++ dev_err(&spi->dev, "no chip found, err=%d\n", err); ++ goto err_drvdata; ++ } ++ ++ err = vsc7385_upload_ucode(vsc); ++ if (err) ++ goto err_drvdata; ++ ++ err = vsc7385_setup(vsc); ++ if (err) ++ goto err_drvdata; ++ ++ return 0; ++ ++err_drvdata: ++ dev_set_drvdata(&spi->dev, NULL); ++ kfree(vsc); ++ return err; ++} ++ ++static int __devexit vsc7385_remove(struct spi_device *spi) ++{ ++ struct vsc7385_data *vsc; ++ ++ vsc = dev_get_drvdata(&spi->dev); ++ dev_set_drvdata(&spi->dev, NULL); ++ kfree(vsc); ++ ++ return 0; ++} ++ ++static struct spi_driver vsc7385_driver = { ++ .driver = { ++ .name = DRV_NAME, ++ .bus = &spi_bus_type, ++ .owner = THIS_MODULE, ++ }, ++ .probe = vsc7385_probe, ++ .remove = __devexit_p(vsc7385_remove), ++}; ++ ++static int __init vsc7385_init(void) ++{ ++ return spi_register_driver(&vsc7385_driver); ++} ++module_init(vsc7385_init); ++ ++static void __exit vsc7385_exit(void) ++{ ++ spi_unregister_driver(&vsc7385_driver); ++} ++module_exit(vsc7385_exit); ++ ++MODULE_DESCRIPTION(DRV_DESC); ++MODULE_VERSION(DRV_VERSION); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_LICENSE("GPL v2"); ++ +diff -Nur linux-2.6.39.orig/drivers/tty/serial/ar933x_uart.c linux-2.6.39/drivers/tty/serial/ar933x_uart.c +--- linux-2.6.39.orig/drivers/tty/serial/ar933x_uart.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/tty/serial/ar933x_uart.c 2011-08-06 09:32:37.098016752 +0200 +@@ -0,0 +1,688 @@ ++/* ++ * Atheros AR933X SoC built-in UART driver ++ * ++ * Copyright (C) 2011 Gabor Juhos ++ * ++ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define DRIVER_NAME "ar933x-uart" ++ ++#define AR933X_DUMMY_STATUS_RD 0x01 ++ ++static struct uart_driver ar933x_uart_driver; ++ ++struct ar933x_uart_port { ++ struct uart_port port; ++ unsigned int ier; /* shadow Interrupt Enable Register */ ++}; ++ ++static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, ++ int offset) ++{ ++ return readl(up->port.membase + offset); ++} ++ ++static inline void ar933x_uart_write(struct ar933x_uart_port *up, ++ int offset, unsigned int value) ++{ ++ writel(value, up->port.membase + offset); ++} ++ ++static inline void ar933x_uart_rmw(struct ar933x_uart_port *up, ++ unsigned int offset, ++ unsigned int mask, ++ unsigned int val) ++{ ++ unsigned int t; ++ ++ t = ar933x_uart_read(up, offset); ++ t &= ~mask; ++ t |= val; ++ ar933x_uart_write(up, offset, t); ++} ++ ++static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up, ++ unsigned int offset, ++ unsigned int val) ++{ ++ ar933x_uart_rmw(up, offset, 0, val); ++} ++ ++static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up, ++ unsigned int offset, ++ unsigned int val) ++{ ++ ar933x_uart_rmw(up, offset, val, 0); ++} ++ ++static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up) ++{ ++ up->ier |= AR933X_UART_INT_TX_EMPTY; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++} ++ ++static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up) ++{ ++ up->ier &= ~AR933X_UART_INT_TX_EMPTY; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++} ++ ++static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch) ++{ ++ unsigned int rdata; ++ ++ rdata = ch & AR933X_UART_DATA_TX_RX_MASK; ++ rdata |= AR933X_UART_DATA_TX_CSR; ++ ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata); ++} ++ ++static unsigned int ar933x_uart_tx_empty(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ unsigned long flags; ++ unsigned int rdata; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT; ++} ++ ++static unsigned int ar933x_uart_get_mctrl(struct uart_port *port) ++{ ++ return TIOCM_CAR; ++} ++ ++static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) ++{ ++} ++ ++static void ar933x_uart_start_tx(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ ar933x_uart_start_tx_interrupt(up); ++} ++ ++static void ar933x_uart_stop_tx(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ ar933x_uart_stop_tx_interrupt(up); ++} ++ ++static void ar933x_uart_stop_rx(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ up->ier &= ~AR933X_UART_INT_RX_VALID; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++} ++ ++static void ar933x_uart_break_ctl(struct uart_port *port, int break_state) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ if (break_state == -1) ++ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_TX_BREAK); ++ else ++ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_TX_BREAK); ++ spin_unlock_irqrestore(&up->port.lock, flags); ++} ++ ++static void ar933x_uart_enable_ms(struct uart_port *port) ++{ ++} ++ ++static void ar933x_uart_set_termios(struct uart_port *port, ++ struct ktermios *new, ++ struct ktermios *old) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ unsigned int cs; ++ unsigned long flags; ++ unsigned int baud, scale; ++ ++ /* Only CS8 is supported */ ++ new->c_cflag &= ~CSIZE; ++ new->c_cflag |= CS8; ++ ++ /* Only one stop bit is supported */ ++ new->c_cflag &= ~CSTOPB; ++ ++ cs = 0; ++ if (new->c_cflag & PARENB) { ++ if (!(new->c_cflag & PARODD)) ++ cs |= AR933X_UART_CS_PARITY_EVEN; ++ else ++ cs |= AR933X_UART_CS_PARITY_ODD; ++ } else { ++ cs |= AR933X_UART_CS_PARITY_NONE; ++ } ++ ++ /* Mark/space parity is not supported */ ++ new->c_cflag &= ~CMSPAR; ++ ++ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); ++ scale = (port->uartclk / (16 * baud)) - 1; ++ ++ /* ++ * Ok, we're now changing the port state. Do it with ++ * interrupts disabled. ++ */ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ++ /* Update the per-port timeout. */ ++ uart_update_timeout(port, new->c_cflag, baud); ++ ++ up->port.ignore_status_mask = 0; ++ ++ /* ignore all characters if CREAD is not set */ ++ if ((new->c_cflag & CREAD) == 0) ++ up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD; ++ ++ ar933x_uart_write(up, AR933X_UART_CLOCK_REG, ++ scale << AR933X_UART_CLOCK_SCALE_S | 8192); ++ ++ /* setup configuration register */ ++ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs); ++ ++ /* enable host interrupt */ ++ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_HOST_INT_EN); ++ ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ if (tty_termios_baud_rate(new)) ++ tty_termios_encode_baud_rate(new, baud, baud); ++} ++ ++static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) ++{ ++ struct tty_struct *tty; ++ int max_count = 256; ++ ++ tty = tty_port_tty_get(&up->port.state->port); ++ do { ++ unsigned int rdata; ++ unsigned char ch; ++ ++ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); ++ if ((rdata & AR933X_UART_DATA_RX_CSR) == 0) ++ break; ++ ++ /* remove the character from the FIFO */ ++ ar933x_uart_write(up, AR933X_UART_DATA_REG, ++ AR933X_UART_DATA_RX_CSR); ++ ++ if (!tty) { ++ /* discard the data if no tty available */ ++ continue; ++ } ++ ++ up->port.icount.rx++; ++ ch = rdata & AR933X_UART_DATA_TX_RX_MASK; ++ ++ if (uart_handle_sysrq_char(&up->port, ch)) ++ continue; ++ ++ if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0) ++ tty_insert_flip_char(tty, ch, TTY_NORMAL); ++ } while (max_count-- > 0); ++ ++ if (tty) { ++ tty_flip_buffer_push(tty); ++ tty_kref_put(tty); ++ } ++} ++ ++static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) ++{ ++ struct circ_buf *xmit = &up->port.state->xmit; ++ int count; ++ ++ if (uart_tx_stopped(&up->port)) ++ return; ++ ++ count = up->port.fifosize; ++ do { ++ unsigned int rdata; ++ ++ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); ++ if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) ++ break; ++ ++ if (up->port.x_char) { ++ ar933x_uart_putc(up, up->port.x_char); ++ up->port.icount.tx++; ++ up->port.x_char = 0; ++ continue; ++ } ++ ++ if (uart_circ_empty(xmit)) ++ break; ++ ++ ar933x_uart_putc(up, xmit->buf[xmit->tail]); ++ ++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); ++ up->port.icount.tx++; ++ } while (--count > 0); ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(&up->port); ++ ++ if (!uart_circ_empty(xmit)) ++ ar933x_uart_start_tx_interrupt(up); ++} ++ ++static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id) ++{ ++ struct ar933x_uart_port *up = dev_id; ++ unsigned int status; ++ ++ status = ar933x_uart_read(up, AR933X_UART_CS_REG); ++ if ((status & AR933X_UART_CS_HOST_INT) == 0) ++ return IRQ_NONE; ++ ++ spin_lock(&up->port.lock); ++ ++ status = ar933x_uart_read(up, AR933X_UART_INT_REG); ++ status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG); ++ ++ if (status & AR933X_UART_INT_RX_VALID) { ++ ar933x_uart_write(up, AR933X_UART_INT_REG, ++ AR933X_UART_INT_RX_VALID); ++ ar933x_uart_rx_chars(up); ++ } ++ ++ if (status & AR933X_UART_INT_TX_EMPTY) { ++ ar933x_uart_write(up, AR933X_UART_INT_REG, ++ AR933X_UART_INT_TX_EMPTY); ++ ar933x_uart_stop_tx_interrupt(up); ++ ar933x_uart_tx_chars(up); ++ } ++ ++ spin_unlock(&up->port.lock); ++ ++ return IRQ_HANDLED; ++} ++ ++static int ar933x_uart_startup(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ unsigned long flags; ++ int ret; ++ ++ ret = request_irq(up->port.irq, ar933x_uart_interrupt, ++ up->port.irqflags, dev_name(up->port.dev), up); ++ if (ret) ++ return ret; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ++ /* Enable HOST interrupts */ ++ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_HOST_INT_EN); ++ ++ /* Enable RX interrupts */ ++ up->ier = AR933X_UART_INT_RX_VALID; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++ ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ return 0; ++} ++ ++static void ar933x_uart_shutdown(struct uart_port *port) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ /* Disable all interrupts */ ++ up->ier = 0; ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); ++ ++ /* Disable break condition */ ++ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, ++ AR933X_UART_CS_TX_BREAK); ++ ++ free_irq(up->port.irq, up); ++} ++ ++static const char *ar933x_uart_type(struct uart_port *port) ++{ ++ return (port->type == PORT_AR933X) ? "AR933X UART" : NULL; ++} ++ ++static void ar933x_uart_release_port(struct uart_port *port) ++{ ++ /* Nothing to release ... */ ++} ++ ++static int ar933x_uart_request_port(struct uart_port *port) ++{ ++ /* UARTs always present */ ++ return 0; ++} ++ ++static void ar933x_uart_config_port(struct uart_port *port, int flags) ++{ ++ if (flags & UART_CONFIG_TYPE) ++ port->type = PORT_AR933X; ++} ++ ++static int ar933x_uart_verify_port(struct uart_port *port, ++ struct serial_struct *ser) ++{ ++ if (ser->type != PORT_UNKNOWN && ++ ser->type != PORT_AR933X) ++ return -EINVAL; ++ ++ if (ser->irq < 0 || ser->irq >= NR_IRQS) ++ return -EINVAL; ++ ++ if (ser->baud_base < 28800) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static struct uart_ops ar933x_uart_ops = { ++ .tx_empty = ar933x_uart_tx_empty, ++ .set_mctrl = ar933x_uart_set_mctrl, ++ .get_mctrl = ar933x_uart_get_mctrl, ++ .stop_tx = ar933x_uart_stop_tx, ++ .start_tx = ar933x_uart_start_tx, ++ .stop_rx = ar933x_uart_stop_rx, ++ .enable_ms = ar933x_uart_enable_ms, ++ .break_ctl = ar933x_uart_break_ctl, ++ .startup = ar933x_uart_startup, ++ .shutdown = ar933x_uart_shutdown, ++ .set_termios = ar933x_uart_set_termios, ++ .type = ar933x_uart_type, ++ .release_port = ar933x_uart_release_port, ++ .request_port = ar933x_uart_request_port, ++ .config_port = ar933x_uart_config_port, ++ .verify_port = ar933x_uart_verify_port, ++}; ++ ++#ifdef CONFIG_SERIAL_AR933X_CONSOLE ++ ++static struct ar933x_uart_port * ++ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; ++ ++static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up) ++{ ++ unsigned int status; ++ unsigned int timeout = 60000; ++ ++ /* Wait up to 60ms for the character(s) to be sent. */ ++ do { ++ status = ar933x_uart_read(up, AR933X_UART_DATA_REG); ++ if (--timeout == 0) ++ break; ++ udelay(1); ++ } while ((status & AR933X_UART_DATA_TX_CSR) == 0); ++} ++ ++static void ar933x_uart_console_putchar(struct uart_port *port, int ch) ++{ ++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; ++ ++ ar933x_uart_wait_xmitr(up); ++ ar933x_uart_putc(up, ch); ++} ++ ++static void ar933x_uart_console_write(struct console *co, const char *s, ++ unsigned int count) ++{ ++ struct ar933x_uart_port *up = ar933x_console_ports[co->index]; ++ unsigned long flags; ++ unsigned int int_en; ++ int locked = 1; ++ ++ local_irq_save(flags); ++ ++ if (up->port.sysrq) ++ locked = 0; ++ else if (oops_in_progress) ++ locked = spin_trylock(&up->port.lock); ++ else ++ spin_lock(&up->port.lock); ++ ++ /* ++ * First save the IER then disable the interrupts ++ */ ++ int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG); ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0); ++ ++ uart_console_write(&up->port, s, count, ar933x_uart_console_putchar); ++ ++ /* ++ * Finally, wait for transmitter to become empty ++ * and restore the IER ++ */ ++ ar933x_uart_wait_xmitr(up); ++ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en); ++ ++ ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS); ++ ++ if (locked) ++ spin_unlock(&up->port.lock); ++ ++ local_irq_restore(flags); ++} ++ ++static int ar933x_uart_console_setup(struct console *co, char *options) ++{ ++ struct ar933x_uart_port *up; ++ int baud = 115200; ++ int bits = 8; ++ int parity = 'n'; ++ int flow = 'n'; ++ ++ if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS) ++ return -EINVAL; ++ ++ up = ar933x_console_ports[co->index]; ++ if (!up) ++ return -ENODEV; ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ ++ return uart_set_options(&up->port, co, baud, parity, bits, flow); ++} ++ ++static struct console ar933x_uart_console = { ++ .name = "ttyATH", ++ .write = ar933x_uart_console_write, ++ .device = uart_console_device, ++ .setup = ar933x_uart_console_setup, ++ .flags = CON_PRINTBUFFER, ++ .index = -1, ++ .data = &ar933x_uart_driver, ++}; ++ ++static void ar933x_uart_add_console_port(struct ar933x_uart_port *up) ++{ ++ ar933x_console_ports[up->port.line] = up; ++} ++ ++#define AR933X_SERIAL_CONSOLE (&ar933x_uart_console) ++ ++#else ++ ++static inline void ar933x_uart_add_console_port(struct ar933x_uart_port *up) {} ++ ++#define AR933X_SERIAL_CONSOLE NULL ++ ++#endif /* CONFIG_SERIAL_AR933X_CONSOLE */ ++ ++static struct uart_driver ar933x_uart_driver = { ++ .owner = THIS_MODULE, ++ .driver_name = DRIVER_NAME, ++ .dev_name = "ttyATH", ++ .nr = CONFIG_SERIAL_AR933X_NR_UARTS, ++ .cons = AR933X_SERIAL_CONSOLE, ++}; ++ ++static int __devinit ar933x_uart_probe(struct platform_device *pdev) ++{ ++ struct ar933x_uart_platform_data *pdata; ++ struct ar933x_uart_port *up; ++ struct uart_port *port; ++ struct resource *mem_res; ++ struct resource *irq_res; ++ int id; ++ int ret; ++ ++ pdata = pdev->dev.platform_data; ++ if (!pdata) ++ return -EINVAL; ++ ++ id = pdev->id; ++ if (id == -1) ++ id = 0; ++ ++ if (id > CONFIG_SERIAL_AR933X_NR_UARTS) ++ return -EINVAL; ++ ++ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!mem_res) { ++ dev_err(&pdev->dev, "no MEM resource\n"); ++ return -EINVAL; ++ } ++ ++ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!irq_res) { ++ dev_err(&pdev->dev, "no IRQ resource\n"); ++ return -EINVAL; ++ } ++ ++ up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL); ++ if (!up) ++ return -ENOMEM; ++ ++ port = &up->port; ++ port->mapbase = mem_res->start; ++ ++ port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE); ++ if (!port->membase) { ++ ret = -ENOMEM; ++ goto err_free_up; ++ } ++ ++ port->line = id; ++ port->irq = irq_res->start; ++ port->dev = &pdev->dev; ++ port->type = PORT_AR933X; ++ port->iotype = UPIO_MEM32; ++ port->uartclk = pdata->uartclk; ++ ++ port->regshift = 2; ++ port->fifosize = AR933X_UART_FIFO_SIZE; ++ port->ops = &ar933x_uart_ops; ++ ++ ar933x_uart_add_console_port(up); ++ ++ ret = uart_add_one_port(&ar933x_uart_driver, &up->port); ++ if (ret) ++ goto err_unmap; ++ ++ platform_set_drvdata(pdev, up); ++ return 0; ++ ++err_unmap: ++ iounmap(up->port.membase); ++err_free_up: ++ kfree(up); ++ return ret; ++} ++ ++static int __devexit ar933x_uart_remove(struct platform_device *pdev) ++{ ++ struct ar933x_uart_port *up; ++ ++ up = platform_get_drvdata(pdev); ++ platform_set_drvdata(pdev, NULL); ++ ++ if (up) { ++ uart_remove_one_port(&ar933x_uart_driver, &up->port); ++ iounmap(up->port.membase); ++ kfree(up); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver ar933x_uart_platform_driver = { ++ .probe = ar933x_uart_probe, ++ .remove = __devexit_p(ar933x_uart_remove), ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init ar933x_uart_init(void) ++{ ++ int ret; ++ ++ ar933x_uart_driver.nr = CONFIG_SERIAL_AR933X_NR_UARTS; ++ ret = uart_register_driver(&ar933x_uart_driver); ++ if (ret) ++ goto err_out; ++ ++ ret = platform_driver_register(&ar933x_uart_platform_driver); ++ if (ret) ++ goto err_unregister_uart_driver; ++ ++ return 0; ++ ++err_unregister_uart_driver: ++ uart_unregister_driver(&ar933x_uart_driver); ++err_out: ++ return ret; ++} ++ ++static void __exit ar933x_uart_exit(void) ++{ ++ platform_driver_unregister(&ar933x_uart_platform_driver); ++ uart_unregister_driver(&ar933x_uart_driver); ++} ++ ++module_init(ar933x_uart_init); ++module_exit(ar933x_uart_exit); ++ ++MODULE_DESCRIPTION("Atheros AR933X UART driver"); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:" DRIVER_NAME); +diff -Nur linux-2.6.39.orig/drivers/usb/host/ehci-ar71xx.c linux-2.6.39/drivers/usb/host/ehci-ar71xx.c +--- linux-2.6.39.orig/drivers/usb/host/ehci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/usb/host/ehci-ar71xx.c 2011-04-27 12:19:22.267661616 +0200 +@@ -0,0 +1,242 @@ ++/* ++ * Bus Glue for Atheros AR71xx built-in EHCI controller. ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Copyright (C) 2007 Atheros Communications, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++ ++#include ++ ++extern int usb_disabled(void); ++ ++static int ehci_ar71xx_init(struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ int ret; ++ ++ ehci->caps = hcd->regs; ++ ehci->regs = hcd->regs + ++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); ++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); ++ ++ ehci->sbrn = 0x20; ++ ehci->has_synopsys_hc_bug = 1; ++ ++ ehci_reset(ehci); ++ ++ ret = ehci_init(hcd); ++ if (ret) ++ return ret; ++ ++ ehci_port_power(ehci, 0); ++ ++ return 0; ++} ++ ++static int ehci_ar91xx_init(struct usb_hcd *hcd) ++{ ++ struct ehci_hcd *ehci = hcd_to_ehci(hcd); ++ int ret; ++ ++ ehci->caps = hcd->regs + 0x100; ++ ehci->regs = hcd->regs + 0x100 + ++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); ++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); ++ ++ hcd->has_tt = 1; ++ ehci->sbrn = 0x20; ++ ++ ehci_reset(ehci); ++ ++ ret = ehci_init(hcd); ++ if (ret) ++ return ret; ++ ++ ehci_port_power(ehci, 0); ++ ++ return 0; ++} ++ ++static int ehci_ar71xx_probe(const struct hc_driver *driver, ++ struct usb_hcd **hcd_out, ++ struct platform_device *pdev) ++{ ++ struct usb_hcd *hcd; ++ struct resource *res; ++ int irq; ++ int ret; ++ ++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!res) { ++ dev_dbg(&pdev->dev, "no IRQ specified for %s\n", ++ dev_name(&pdev->dev)); ++ return -ENODEV; ++ } ++ irq = res->start; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_dbg(&pdev->dev, "no base address specified for %s\n", ++ dev_name(&pdev->dev)); ++ return -ENODEV; ++ } ++ ++ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); ++ if (!hcd) ++ return -ENOMEM; ++ ++ hcd->rsrc_start = res->start; ++ hcd->rsrc_len = res->end - res->start + 1; ++ ++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { ++ dev_dbg(&pdev->dev, "controller already in use\n"); ++ ret = -EBUSY; ++ goto err_put_hcd; ++ } ++ ++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); ++ if (!hcd->regs) { ++ dev_dbg(&pdev->dev, "error mapping memory\n"); ++ ret = -EFAULT; ++ goto err_release_region; ++ } ++ ++ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); ++ if (ret) ++ goto err_iounmap; ++ ++ return 0; ++ ++err_iounmap: ++ iounmap(hcd->regs); ++ ++err_release_region: ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++err_put_hcd: ++ usb_put_hcd(hcd); ++ return ret; ++} ++ ++static void ehci_ar71xx_remove(struct usb_hcd *hcd, ++ struct platform_device *pdev) ++{ ++ usb_remove_hcd(hcd); ++ iounmap(hcd->regs); ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++ usb_put_hcd(hcd); ++} ++ ++static const struct hc_driver ehci_ar71xx_hc_driver = { ++ .description = hcd_name, ++ .product_desc = "Atheros AR71xx built-in EHCI controller", ++ .hcd_priv_size = sizeof(struct ehci_hcd), ++ ++ .irq = ehci_irq, ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ .reset = ehci_ar71xx_init, ++ .start = ehci_run, ++ .stop = ehci_stop, ++ .shutdown = ehci_shutdown, ++ ++ .urb_enqueue = ehci_urb_enqueue, ++ .urb_dequeue = ehci_urb_dequeue, ++ .endpoint_disable = ehci_endpoint_disable, ++ .endpoint_reset = ehci_endpoint_reset, ++ ++ .get_frame_number = ehci_get_frame, ++ ++ .hub_status_data = ehci_hub_status_data, ++ .hub_control = ehci_hub_control, ++#ifdef CONFIG_PM ++ .hub_suspend = ehci_hub_suspend, ++ .hub_resume = ehci_hub_resume, ++#endif ++ .relinquish_port = ehci_relinquish_port, ++ .port_handed_over = ehci_port_handed_over, ++ ++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, ++}; ++ ++static const struct hc_driver ehci_ar91xx_hc_driver = { ++ .description = hcd_name, ++ .product_desc = "Atheros AR91xx built-in EHCI controller", ++ .hcd_priv_size = sizeof(struct ehci_hcd), ++ .irq = ehci_irq, ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ .reset = ehci_ar91xx_init, ++ .start = ehci_run, ++ .stop = ehci_stop, ++ .shutdown = ehci_shutdown, ++ ++ .urb_enqueue = ehci_urb_enqueue, ++ .urb_dequeue = ehci_urb_dequeue, ++ .endpoint_disable = ehci_endpoint_disable, ++ .endpoint_reset = ehci_endpoint_reset, ++ ++ .get_frame_number = ehci_get_frame, ++ ++ .hub_status_data = ehci_hub_status_data, ++ .hub_control = ehci_hub_control, ++#ifdef CONFIG_PM ++ .hub_suspend = ehci_hub_suspend, ++ .hub_resume = ehci_hub_resume, ++#endif ++ .relinquish_port = ehci_relinquish_port, ++ .port_handed_over = ehci_port_handed_over, ++ ++ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, ++}; ++ ++static int ehci_ar71xx_driver_probe(struct platform_device *pdev) ++{ ++ struct ar71xx_ehci_platform_data *pdata; ++ struct usb_hcd *hcd = NULL; ++ int ret; ++ ++ if (usb_disabled()) ++ return -ENODEV; ++ ++ pdata = pdev->dev.platform_data; ++ if (!pdata) { ++ dev_err(&pdev->dev, "no platform data specified for %s\n", ++ dev_name(&pdev->dev)); ++ return -ENODEV; ++ } ++ ++ if (pdata->is_ar91xx) ++ ret = ehci_ar71xx_probe(&ehci_ar91xx_hc_driver, &hcd, pdev); ++ else ++ ret = ehci_ar71xx_probe(&ehci_ar71xx_hc_driver, &hcd, pdev); ++ ++ return ret; ++} ++ ++static int ehci_ar71xx_driver_remove(struct platform_device *pdev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(pdev); ++ ++ ehci_ar71xx_remove(hcd, pdev); ++ return 0; ++} ++ ++MODULE_ALIAS("platform:ar71xx-ehci"); ++ ++static struct platform_driver ehci_ar71xx_driver = { ++ .probe = ehci_ar71xx_driver_probe, ++ .remove = ehci_ar71xx_driver_remove, ++ .driver = { ++ .name = "ar71xx-ehci", ++ } ++}; +diff -Nur linux-2.6.39.orig/drivers/usb/host/ehci-hcd.c linux-2.6.39/drivers/usb/host/ehci-hcd.c +--- linux-2.6.39.orig/drivers/usb/host/ehci-hcd.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/usb/host/ehci-hcd.c 2011-08-22 16:21:42.807985568 +0200 +@@ -1265,6 +1265,11 @@ + #define PLATFORM_DRIVER tegra_ehci_driver + #endif + ++#ifdef CONFIG_USB_EHCI_AR71XX ++#include "ehci-ar71xx.c" ++#define PLATFORM_DRIVER ehci_ar71xx_driver ++#endif ++ + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ + !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ + !defined(XILINX_OF_PLATFORM_DRIVER) +diff -Nur linux-2.6.39.orig/drivers/usb/host/Kconfig linux-2.6.39/drivers/usb/host/Kconfig +--- linux-2.6.39.orig/drivers/usb/host/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/usb/host/Kconfig 2011-08-22 16:21:42.767983341 +0200 +@@ -129,6 +129,13 @@ + config USB_FSL_MPH_DR_OF + tristate + ++config USB_EHCI_AR71XX ++ bool "USB EHCI support for AR71xx" ++ depends on USB_EHCI_HCD && ATHEROS_AR71XX ++ default y ++ help ++ Support for Atheros AR71xx built-in EHCI controller ++ + config USB_EHCI_FSL + bool "Support for Freescale on-chip EHCI USB controller" + depends on USB_EHCI_HCD && FSL_SOC +@@ -287,6 +294,13 @@ + Enables support for the on-chip OHCI controller on + OMAP3 and later chips. + ++config USB_OHCI_AR71XX ++ bool "USB OHCI support for Atheros AR71xx" ++ depends on USB_OHCI_HCD && ATHEROS_AR71XX ++ default y ++ help ++ Support for Atheros AR71xx built-in OHCI controller ++ + config USB_OHCI_HCD_PPC_SOC + bool "OHCI support for on-chip PPC USB controller" + depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) +diff -Nur linux-2.6.39.orig/drivers/usb/host/ohci-ar71xx.c linux-2.6.39/drivers/usb/host/ohci-ar71xx.c +--- linux-2.6.39.orig/drivers/usb/host/ohci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/usb/host/ohci-ar71xx.c 2011-04-27 12:19:22.267661616 +0200 +@@ -0,0 +1,165 @@ ++/* ++ * OHCI HCD (Host Controller Driver) for USB. ++ * ++ * Bus Glue for Atheros AR71xx built-in OHCI controller. ++ * ++ * Copyright (C) 2008 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * Copyright (C) 2007 Atheros Communications, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++ ++extern int usb_disabled(void); ++ ++static int usb_hcd_ar71xx_probe(const struct hc_driver *driver, ++ struct platform_device *pdev) ++{ ++ struct usb_hcd *hcd; ++ struct resource *res; ++ int irq; ++ int ret; + -+#define AR7240_PORT_CPU 0 -+#define AR7240_NUM_PORTS 6 -+#define AR7240_NUM_PHYS 5 ++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!res) { ++ dev_dbg(&pdev->dev, "no IRQ specified for %s\n", ++ dev_name(&pdev->dev)); ++ return -ENODEV; ++ } ++ irq = res->start; + -+#define AR7240_PHY_ID1 0x004d -+#define AR7240_PHY_ID2 0xd041 ++ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); ++ if (!hcd) ++ return -ENOMEM; + -+#define AR7240_PORT_MASK(_port) BIT((_port)) -+#define AR7240_PORT_MASK_ALL BITM(AR7240_NUM_PORTS) -+#define AR7240_PORT_MASK_BUT(_port) (AR7240_PORT_MASK_ALL & ~BIT((_port))) ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_dbg(&pdev->dev, "no base address specified for %s\n", ++ dev_name(&pdev->dev)); ++ ret = -ENODEV; ++ goto err_put_hcd; ++ } ++ hcd->rsrc_start = res->start; ++ hcd->rsrc_len = res->end - res->start + 1; + -+struct ar7240sw { -+ struct mii_bus *mii_bus; -+ struct mutex reg_mutex; -+ struct mutex stats_mutex; -+}; ++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { ++ dev_dbg(&pdev->dev, "controller already in use\n"); ++ ret = -EBUSY; ++ goto err_put_hcd; ++ } + -+struct ar7240sw_hw_stat { -+ char string[ETH_GSTRING_LEN]; -+ int sizeof_stat; -+ int reg; -+}; ++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); ++ if (!hcd->regs) { ++ dev_dbg(&pdev->dev, "error mapping memory\n"); ++ ret = -EFAULT; ++ goto err_release_region; ++ } + -+static inline struct ar7240sw *dsa_to_ar7240sw(struct dsa_switch *ds) -+{ -+ return (struct ar7240sw *)(ds + 1); -+} ++ ohci_hcd_init(hcd_to_ohci(hcd)); + -+static inline void ar7240sw_init(struct ar7240sw *as, struct mii_bus *mii) -+{ -+ as->mii_bus = mii; -+ mutex_init(&as->reg_mutex); -+ mutex_init(&as->stats_mutex); -+} ++ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); ++ if (ret) ++ goto err_stop_hcd; + -+static inline u16 mk_phy_addr(u32 reg) -+{ -+ return (0x17 & ((reg >> 4) | 0x10)); -+} ++ return 0; + -+static inline u16 mk_phy_reg(u32 reg) -+{ -+ return ((reg << 1) & 0x1e); ++err_stop_hcd: ++ iounmap(hcd->regs); ++err_release_region: ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++err_put_hcd: ++ usb_put_hcd(hcd); ++ return ret; +} + -+static inline u16 mk_high_addr(u32 reg) ++void usb_hcd_ar71xx_remove(struct usb_hcd *hcd, struct platform_device *pdev) +{ -+ return ((reg >> 7) & 0x1ff); ++ usb_remove_hcd(hcd); ++ iounmap(hcd->regs); ++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len); ++ usb_put_hcd(hcd); +} + -+static u32 __ar7240sw_reg_read(struct ar7240sw *as, u32 reg) ++static int __devinit ohci_ar71xx_start(struct usb_hcd *hcd) +{ -+ struct mii_bus *mii = as->mii_bus; -+ u16 phy_addr; -+ u16 phy_reg; -+ u32 hi, lo; -+ -+ reg = (reg & 0xfffffffc) >> 2; ++ struct ohci_hcd *ohci = hcd_to_ohci(hcd); ++ int ret; + -+ mdiobus_write(mii, 0x1f, 0x10, mk_high_addr(reg)); ++ ret = ohci_init(ohci); ++ if (ret < 0) ++ return ret; + -+ phy_addr = mk_phy_addr(reg); -+ phy_reg = mk_phy_reg(reg); ++ ret = ohci_run(ohci); ++ if (ret < 0) ++ goto err; + -+ lo = (u32) mdiobus_read(mii, phy_addr, phy_reg); -+ hi = (u32) mdiobus_read(mii, phy_addr, phy_reg + 1); ++ return 0; + -+ return ((hi << 16) | lo); ++err: ++ ohci_stop(hcd); ++ return ret; +} + -+static void __ar7240sw_reg_write(struct ar7240sw *as, u32 reg, u32 val) -+{ -+ struct mii_bus *mii = as->mii_bus; -+ u16 phy_addr; -+ u16 phy_reg; -+ -+ reg = (reg & 0xfffffffc) >> 2; -+ -+ mdiobus_write(mii, 0x1f, 0x10, mk_high_addr(reg)); -+ -+ phy_addr = mk_phy_addr(reg); -+ phy_reg = mk_phy_reg(reg); ++static const struct hc_driver ohci_ar71xx_hc_driver = { ++ .description = hcd_name, ++ .product_desc = "Atheros AR71xx built-in OHCI controller", ++ .hcd_priv_size = sizeof(struct ohci_hcd), + -+ mdiobus_write(mii, phy_addr, phy_reg + 1, (val >> 16)); -+ mdiobus_write(mii, phy_addr, phy_reg, (val & 0xffff)); -+} ++ .irq = ohci_irq, ++ .flags = HCD_USB11 | HCD_MEMORY, + -+static u32 ar7240sw_reg_read(struct ar7240sw *as, u32 reg_addr) -+{ -+ u32 ret; ++ .start = ohci_ar71xx_start, ++ .stop = ohci_stop, ++ .shutdown = ohci_shutdown, + -+ mutex_lock(&as->reg_mutex); -+ ret = __ar7240sw_reg_read(as, reg_addr); -+ mutex_unlock(&as->reg_mutex); ++ .urb_enqueue = ohci_urb_enqueue, ++ .urb_dequeue = ohci_urb_dequeue, ++ .endpoint_disable = ohci_endpoint_disable, + -+ return ret; -+} ++ /* ++ * scheduling support ++ */ ++ .get_frame_number = ohci_get_frame, + -+static void ar7240sw_reg_write(struct ar7240sw *as, u32 reg_addr, u32 reg_val) -+{ -+ mutex_lock(&as->reg_mutex); -+ __ar7240sw_reg_write(as, reg_addr, reg_val); -+ mutex_unlock(&as->reg_mutex); -+} ++ /* ++ * root hub support ++ */ ++ .hub_status_data = ohci_hub_status_data, ++ .hub_control = ohci_hub_control, ++ .start_port_reset = ohci_start_port_reset, ++}; + -+static u32 ar7240sw_reg_rmw(struct ar7240sw *as, u32 reg, u32 mask, u32 val) ++static int ohci_hcd_ar71xx_drv_probe(struct platform_device *pdev) +{ -+ u32 t; -+ -+ mutex_lock(&as->reg_mutex); -+ t = __ar7240sw_reg_read(as, reg); -+ t &= ~mask; -+ t |= val; -+ __ar7240sw_reg_write(as, reg, t); -+ mutex_unlock(&as->reg_mutex); ++ if (usb_disabled()) ++ return -ENODEV; + -+ return t; ++ return usb_hcd_ar71xx_probe(&ohci_ar71xx_hc_driver, pdev); +} + -+static void ar7240sw_reg_set(struct ar7240sw *as, u32 reg, u32 val) ++static int ohci_hcd_ar71xx_drv_remove(struct platform_device *pdev) +{ -+ u32 t; ++ struct usb_hcd *hcd = platform_get_drvdata(pdev); + -+ mutex_lock(&as->reg_mutex); -+ t = __ar7240sw_reg_read(as, reg); -+ t |= val; -+ __ar7240sw_reg_write(as, reg, t); -+ mutex_unlock(&as->reg_mutex); ++ usb_hcd_ar71xx_remove(hcd, pdev); ++ return 0; +} + -+static int ar7240sw_reg_wait(struct ar7240sw *as, u32 reg, u32 mask, u32 val, -+ unsigned timeout) -+{ -+ int i; -+ -+ for (i = 0; i < timeout; i++) { -+ u32 t; ++MODULE_ALIAS("platform:ar71xx-ohci"); + -+ t = ar7240sw_reg_read(as, reg); -+ if ((t & mask) == val) -+ return 0; ++static struct platform_driver ohci_hcd_ar71xx_driver = { ++ .probe = ohci_hcd_ar71xx_drv_probe, ++ .remove = ohci_hcd_ar71xx_drv_remove, ++ .shutdown = usb_hcd_platform_shutdown, ++ .driver = { ++ .name = "ar71xx-ohci", ++ .owner = THIS_MODULE, ++ }, ++}; +diff -Nur linux-2.6.39.orig/drivers/usb/host/ohci-hcd.c linux-2.6.39/drivers/usb/host/ohci-hcd.c +--- linux-2.6.39.orig/drivers/usb/host/ohci-hcd.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/usb/host/ohci-hcd.c 2011-08-22 16:21:42.847983209 +0200 +@@ -1105,6 +1105,11 @@ + #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver + #endif + ++#ifdef CONFIG_USB_OHCI_AR71XX ++#include "ohci-ar71xx.c" ++#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver ++#endif + -+ msleep(1); -+ } + #if !defined(PCI_DRIVER) && \ + !defined(PLATFORM_DRIVER) && \ + !defined(OMAP1_PLATFORM_DRIVER) && \ +diff -Nur linux-2.6.39.orig/drivers/watchdog/ar71xx_wdt.c linux-2.6.39/drivers/watchdog/ar71xx_wdt.c +--- linux-2.6.39.orig/drivers/watchdog/ar71xx_wdt.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/watchdog/ar71xx_wdt.c 2011-08-06 09:32:37.118022037 +0200 +@@ -0,0 +1,299 @@ ++/* ++ * Driver for the Atheros AR71xx SoC's built-in hardware watchdog timer. ++ * ++ * Copyright (C) 2010-2011 Jaiganesh Narayanan ++ * Copyright (C) 2008 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * Parts of this file are based on Atheros 2.6.31 BSP ++ * ++ * This driver was based on: drivers/watchdog/ixp4xx_wdt.c ++ * Author: Deepak Saxena ++ * Copyright 2004 (c) MontaVista, Software, Inc. ++ * ++ * which again was based on sa1100 driver, ++ * Copyright (C) 2000 Oleg Drokin ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ + -+ return -ETIMEDOUT; -+} ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + -+static u16 ar7240sw_phy_read(struct ar7240sw *as, unsigned phy_addr, -+ unsigned reg_addr) -+{ -+ u32 t; -+ int err; ++#include + -+ if (phy_addr >= AR7240_NUM_PHYS) -+ return 0xffff; ++#define DRV_NAME "ar71xx-wdt" ++#define DRV_DESC "Atheros AR71xx hardware watchdog driver" ++#define DRV_VERSION "0.1.0" + -+ t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | -+ (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | -+ AR7240_MDIO_CTRL_MASTER_EN | -+ AR7240_MDIO_CTRL_BUSY | -+ AR7240_MDIO_CTRL_CMD_READ; ++#define WDT_TIMEOUT 15 /* seconds */ + -+ ar7240sw_reg_write(as, AR7240_REG_MDIO_CTRL, t); -+ err = ar7240sw_reg_wait(as, AR7240_REG_MDIO_CTRL, -+ AR7240_MDIO_CTRL_BUSY, 0, 5); -+ if (err) -+ return 0xffff; ++static int nowayout = WATCHDOG_NOWAYOUT; + -+ t = ar7240sw_reg_read(as, AR7240_REG_MDIO_CTRL); -+ return (t & AR7240_MDIO_CTRL_DATA_M); -+} ++#ifdef CONFIG_WATCHDOG_NOWAYOUT ++module_param(nowayout, int, 0); ++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " ++ "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); ++#endif + -+static int ar7240sw_phy_write(struct ar7240sw *as, unsigned phy_addr, -+ unsigned reg_addr, u16 reg_val) -+{ -+ u32 t; -+ int ret; ++static unsigned long wdt_flags; + -+ if (phy_addr >= AR7240_NUM_PHYS) -+ return -EINVAL; ++#define WDT_FLAGS_BUSY 0 ++#define WDT_FLAGS_EXPECT_CLOSE 1 + -+ t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) | -+ (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) | -+ AR7240_MDIO_CTRL_MASTER_EN | -+ AR7240_MDIO_CTRL_BUSY | -+ AR7240_MDIO_CTRL_CMD_WRITE | -+ reg_val; ++static int wdt_timeout = WDT_TIMEOUT; ++static int boot_status; ++static int max_timeout; ++static u32 wdt_clk_freq; + -+ ar7240sw_reg_write(as, AR7240_REG_MDIO_CTRL, t); -+ ret = ar7240sw_reg_wait(as, AR7240_REG_MDIO_CTRL, -+ AR7240_MDIO_CTRL_BUSY, 0, 5); -+ return ret; ++static inline void ar71xx_wdt_keepalive(void) ++{ ++ ar71xx_reset_wr(AR71XX_RESET_REG_WDOG, wdt_clk_freq * wdt_timeout); +} + -+static int ar7240sw_capture_stats(struct ar7240sw *as) ++static inline void ar71xx_wdt_enable(void) +{ -+ int ret; -+ -+ /* Capture the hardware statistics for all ports */ -+ ar7240sw_reg_write(as, AR7240_REG_MIB_FUNCTION0, -+ (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S)); -+ -+ /* Wait for the capturing to complete. */ -+ ret = ar7240sw_reg_wait(as, AR7240_REG_MIB_FUNCTION0, -+ AR7240_MIB_BUSY, 0, 10); -+ return ret; ++ printk(KERN_DEBUG DRV_NAME ": enabling watchdog timer\n"); ++ ar71xx_wdt_keepalive(); ++ udelay(2); ++ ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_FCR); +} + -+static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port) ++static inline void ar71xx_wdt_disable(void) +{ -+ ar7240sw_reg_write(as, AR7240_REG_PORT_CTRL(port), -+ AR7240_PORT_CTRL_STATE_DISABLED); ++ printk(KERN_DEBUG DRV_NAME ": disabling watchdog timer\n"); ++ ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_NONE); +} + -+static int ar7240sw_reset(struct ar7240sw *as) ++static int ar71xx_wdt_set_timeout(int val) +{ -+ int ret; -+ int i; -+ -+ /* Set all ports to disabled state. */ -+ for (i = 0; i < AR7240_NUM_PORTS; i++) -+ ar7240sw_disable_port(as, i); ++ if (val < 1 || val > max_timeout) ++ return -EINVAL; + -+ /* Wait for transmit queues to drain. */ -+ msleep(2); ++ wdt_timeout = val; ++ ar71xx_wdt_keepalive(); + -+ /* Reset the switch. */ -+ ar7240sw_reg_write(as, AR7240_REG_MASK_CTRL, -+ AR7240_MASK_CTRL_SOFT_RESET); ++ printk(KERN_DEBUG DRV_NAME ": timeout=%d secs\n", wdt_timeout); + -+ ret = ar7240sw_reg_wait(as, AR7240_REG_MASK_CTRL, -+ AR7240_MASK_CTRL_SOFT_RESET, 0, 1000); -+ return ret; ++ return 0; +} + -+static void ar7240sw_setup(struct ar7240sw *as) ++static int ar71xx_wdt_open(struct inode *inode, struct file *file) +{ -+ /* Enable CPU port, and disable mirror port */ -+ ar7240sw_reg_write(as, AR7240_REG_CPU_PORT, -+ AR7240_CPU_PORT_EN | -+ (15 << AR7240_MIRROR_PORT_S)); ++ if (test_and_set_bit(WDT_FLAGS_BUSY, &wdt_flags)) ++ return -EBUSY; + -+ /* Setup TAG priority mapping */ -+ ar7240sw_reg_write(as, AR7240_REG_TAG_PRIORITY, 0xfa50); ++ clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); + -+ /* Enable ARP frame acknowledge */ -+ ar7240sw_reg_set(as, AR7240_REG_AT_CTRL, AR7240_AT_CTRL_ARP_EN); ++ ar71xx_wdt_enable(); + -+ /* Enable Broadcast frames transmitted to the CPU */ -+ ar7240sw_reg_set(as, AR7240_REG_FLOOD_MASK, -+ AR7240_FLOOD_MASK_BROAD_TO_CPU); ++ return nonseekable_open(inode, file); ++} + -+ /* setup MTU */ -+ ar7240sw_reg_rmw(as, AR7240_REG_GLOBAL_CTRL, AR7240_GLOBAL_CTRL_MTU_M, -+ 1536); ++static int ar71xx_wdt_release(struct inode *inode, struct file *file) ++{ ++ if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags)) { ++ ar71xx_wdt_disable(); ++ } else { ++ printk(KERN_CRIT DRV_NAME ": device closed unexpectedly, " ++ "watchdog timer will not stop!\n"); ++ } + -+ /* setup Service TAG */ -+ ar7240sw_reg_rmw(as, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, -+ ETH_P_QINQ); ++ clear_bit(WDT_FLAGS_BUSY, &wdt_flags); ++ clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); ++ ++ return 0; +} + -+static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port) ++static ssize_t ar71xx_wdt_write(struct file *file, const char *data, ++ size_t len, loff_t *ppos) +{ -+ u32 ctrl; -+ u32 dest_ports; -+ u32 vlan; -+ -+ ctrl = AR7240_PORT_CTRL_STATE_FORWARD; ++ if (len) { ++ if (!nowayout) { ++ size_t i; + -+ if (port == AR7240_PORT_CPU) { -+ ar7240sw_reg_write(as, AR7240_REG_PORT_STATUS(port), -+ AR7240_PORT_STATUS_SPEED_1000 | -+ AR7240_PORT_STATUS_TXFLOW | -+ AR7240_PORT_STATUS_RXFLOW | -+ AR7240_PORT_STATUS_TXMAC | -+ AR7240_PORT_STATUS_RXMAC | -+ AR7240_PORT_STATUS_DUPLEX); ++ clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags); + -+ /* allow the CPU port to talk to each of the 'real' ports */ -+ dest_ports = AR7240_PORT_MASK_BUT(port); ++ for (i = 0; i != len; i++) { ++ char c; + -+ /* remove service tag from ingress frames */ -+ ctrl |= AR7240_PORT_CTRL_DOUBLE_TAG; -+ } else { -+ ar7240sw_reg_write(as, AR7240_REG_PORT_STATUS(port), -+ AR7240_PORT_STATUS_LINK_AUTO); ++ if (get_user(c, data + i)) ++ return -EFAULT; + -+ /* -+ * allow each of the 'real' ports to only talk to the CPU -+ * port. -+ */ -+ dest_ports = AR7240_PORT_MASK(port) | -+ AR7240_PORT_MASK(AR7240_PORT_CPU); ++ if (c == 'V') ++ set_bit(WDT_FLAGS_EXPECT_CLOSE, ++ &wdt_flags); ++ } ++ } + -+ /* add service tag to egress frames */ -+ ctrl |= (AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG << -+ AR7240_PORT_CTRL_VLAN_MODE_S); ++ ar71xx_wdt_keepalive(); + } + -+ /* set default VID and and destination ports for this VLAN */ -+ vlan = port; -+ vlan |= (dest_ports << AR7240_PORT_VLAN_DEST_PORTS_S); -+ -+ ar7240sw_reg_write(as, AR7240_REG_PORT_CTRL(port), ctrl); -+ ar7240sw_reg_write(as, AR7240_REG_PORT_VLAN(port), vlan); ++ return len; +} + -+static char *ar7240_dsa_probe(struct mii_bus *mii, int sw_addr) ++static struct watchdog_info ar71xx_wdt_info = { ++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | ++ WDIOF_MAGICCLOSE | WDIOF_CARDRESET, ++ .firmware_version = 0, ++ .identity = "AR71XX watchdog", ++}; ++ ++static long ar71xx_wdt_ioctl(struct file *file, ++ unsigned int cmd, unsigned long arg) +{ -+ struct ar7240sw as; -+ u32 ctrl; -+ u16 phy_id1; -+ u16 phy_id2; -+ u8 ver; ++ int t; ++ int ret; + -+ ar7240sw_init(&as, mii); ++ switch (cmd) { ++ case WDIOC_GETSUPPORT: ++ ret = copy_to_user((struct watchdog_info *)arg, ++ &ar71xx_wdt_info, ++ sizeof(ar71xx_wdt_info)) ? -EFAULT : 0; ++ break; + -+ ctrl = ar7240sw_reg_read(&as, AR7240_REG_MASK_CTRL); ++ case WDIOC_GETSTATUS: ++ ret = put_user(0, (int *)arg) ? -EFAULT : 0; ++ break; + -+ ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) & AR7240_MASK_CTRL_VERSION_M; -+ if (ver != 1) { -+ pr_err("ar7240_dsa: unsupported chip, ctrl=%08x\n", ctrl); -+ return NULL; -+ } ++ case WDIOC_GETBOOTSTATUS: ++ ret = put_user(boot_status, (int *)arg) ? -EFAULT : 0; ++ break; + -+ phy_id1 = ar7240sw_phy_read(&as, 0, MII_PHYSID1); -+ phy_id2 = ar7240sw_phy_read(&as, 0, MII_PHYSID2); -+ if (phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) { -+ pr_err("ar7240_dsa: unknown phy id '%04x:%04x'\n", -+ phy_id1, phy_id2); -+ return NULL; ++ case WDIOC_KEEPALIVE: ++ ar71xx_wdt_keepalive(); ++ ret = 0; ++ break; ++ ++ case WDIOC_SETTIMEOUT: ++ ret = get_user(t, (int *)arg) ? -EFAULT : 0; ++ if (ret) ++ break; ++ ++ ret = ar71xx_wdt_set_timeout(t); ++ if (ret) ++ break; ++ ++ /* fallthrough */ ++ case WDIOC_GETTIMEOUT: ++ ret = put_user(wdt_timeout, (int *)arg) ? -EFAULT : 0; ++ break; ++ ++ default: ++ ret = -ENOTTY; ++ break; + } + -+ return "Atheros AR7240 built-in"; ++ return ret; +} + -+static int ar7240_dsa_setup(struct dsa_switch *ds) ++static const struct file_operations ar71xx_wdt_fops = { ++ .owner = THIS_MODULE, ++ .write = ar71xx_wdt_write, ++ .unlocked_ioctl = ar71xx_wdt_ioctl, ++ .open = ar71xx_wdt_open, ++ .release = ar71xx_wdt_release, ++}; ++ ++static struct miscdevice ar71xx_wdt_miscdev = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = &ar71xx_wdt_fops, ++}; ++ ++static int __devinit ar71xx_wdt_probe(struct platform_device *pdev) +{ -+ struct ar7240sw *as = dsa_to_ar7240sw(ds); -+ int i; + int ret; + -+ ar7240sw_init(as, ds->master_mii_bus); ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ case AR71XX_SOC_AR7240: ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ wdt_clk_freq = ar71xx_ahb_freq; ++ break; ++ ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ wdt_clk_freq = ar71xx_ref_freq; ++ break; ++ ++ default: ++ BUG(); ++ } ++ ++ max_timeout = (0xfffffffful / wdt_clk_freq); ++ wdt_timeout = (max_timeout < WDT_TIMEOUT) ? max_timeout : WDT_TIMEOUT; ++ ++ if (ar71xx_reset_rr(AR71XX_RESET_REG_WDOG_CTRL) & WDOG_CTRL_LAST_RESET) ++ boot_status = WDIOF_CARDRESET; + -+ ret = ar7240sw_reset(as); ++ ret = misc_register(&ar71xx_wdt_miscdev); + if (ret) -+ return ret; ++ goto err_out; + -+ ar7240sw_setup(as); ++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n"); + -+ for (i = 0; i < AR7240_NUM_PORTS; i++) { -+ if (dsa_is_cpu_port(ds, i) || (ds->phys_port_mask & (1 << i))) -+ ar7240sw_setup_port(as, i); -+ else -+ ar7240sw_disable_port(as, i); -+ } ++ printk(KERN_DEBUG DRV_NAME ": timeout=%d secs (max=%d)\n", ++ wdt_timeout, max_timeout); + + return 0; ++ ++err_out: ++ return ret; +} + -+static int ar7240_dsa_set_addr(struct dsa_switch *ds, u8 *addr) ++static int __devexit ar71xx_wdt_remove(struct platform_device *pdev) +{ -+ struct ar7240sw *as = dsa_to_ar7240sw(ds); -+ u32 t; ++ misc_deregister(&ar71xx_wdt_miscdev); ++ return 0; ++} + -+ t = (addr[4] << 8) | addr[5]; -+ ar7240sw_reg_write(as, AR7240_REG_MAC_ADDR0, t); ++static struct platform_driver ar71xx_wdt_driver = { ++ .probe = ar71xx_wdt_probe, ++ .remove = __devexit_p(ar71xx_wdt_remove), ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ }, ++}; + -+ t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; -+ ar7240sw_reg_write(as, AR7240_REG_MAC_ADDR1, t); ++static int __init ar71xx_wdt_init(void) ++{ ++ return platform_driver_register(&ar71xx_wdt_driver); ++} ++module_init(ar71xx_wdt_init); + -+ return 0; ++static void __exit ar71xx_wdt_exit(void) ++{ ++ platform_driver_unregister(&ar71xx_wdt_driver); +} ++module_exit(ar71xx_wdt_exit); ++ ++MODULE_DESCRIPTION(DRV_DESC); ++MODULE_VERSION(DRV_VERSION); ++MODULE_AUTHOR("Gabor Juhos 0 && port < AR7240_NUM_PORTS) -+ return port - 1; ++ int led_pin; ++ u32 gpio_mask; ++ u32 gpio_val; + -+ return -EINVAL; -+} ++ bool is_clk_25mhz; ++ int (*get_mac_revision)(void); ++ int (*external_reset)(void); + }; + + #endif /* _LINUX_ATH9K_PLATFORM_H */ +diff -Nur linux-2.6.39.orig/include/linux/ip.h linux-2.6.39/include/linux/ip.h +--- linux-2.6.39.orig/include/linux/ip.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/include/linux/ip.h 2011-08-24 05:53:21.239229027 +0200 +@@ -102,7 +102,7 @@ + __be32 saddr; + __be32 daddr; + /*The options start here. */ +-}; ++} __packed; + + #ifdef __KERNEL__ + #include +diff -Nur linux-2.6.39.orig/include/linux/ipv6.h linux-2.6.39/include/linux/ipv6.h +--- linux-2.6.39.orig/include/linux/ipv6.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/include/linux/ipv6.h 2011-08-24 05:53:21.289229059 +0200 +@@ -126,7 +126,7 @@ + + struct in6_addr saddr; + struct in6_addr daddr; +-}; ++} __packed; + + #ifdef __KERNEL__ + /* +diff -Nur linux-2.6.39.orig/include/linux/myloader.h linux-2.6.39/include/linux/myloader.h +--- linux-2.6.39.orig/include/linux/myloader.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/include/linux/myloader.h 2011-08-24 03:12:08.307985040 +0200 +@@ -0,0 +1,120 @@ ++/* ++ * Compex's MyLoader specific definitions ++ * ++ * Copyright (C) 2006-2008 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ + -+static int ar7240_dsa_phy_read(struct dsa_switch *ds, int port, int regnum) -+{ -+ struct ar7240sw *as = dsa_to_ar7240sw(ds); -+ int phy_addr; ++#ifndef _MYLOADER_H_ ++#define _MYLOADER_H_ ++ ++/* Myloader specific magic numbers */ ++#define MYLO_MAGIC_SYS_PARAMS 0x20021107 ++#define MYLO_MAGIC_PARTITIONS 0x20021103 ++#define MYLO_MAGIC_BOARD_PARAMS 0x20021103 ++ ++/* Vendor ID's (seems to be same as the PCI vendor ID's) */ ++#define VENID_COMPEX 0x11F6 ++ ++/* Devices based on the ADM5120 */ ++#define DEVID_COMPEX_NP27G 0x0078 ++#define DEVID_COMPEX_NP28G 0x044C ++#define DEVID_COMPEX_NP28GHS 0x044E ++#define DEVID_COMPEX_WP54Gv1C 0x0514 ++#define DEVID_COMPEX_WP54G 0x0515 ++#define DEVID_COMPEX_WP54AG 0x0546 ++#define DEVID_COMPEX_WPP54AG 0x0550 ++#define DEVID_COMPEX_WPP54G 0x0555 ++ ++/* Devices based on the Atheros AR2317 */ ++#define DEVID_COMPEX_NP25G 0x05E6 ++#define DEVID_COMPEX_WPE53G 0x05DC ++ ++/* Devices based on the Atheros AR71xx */ ++#define DEVID_COMPEX_WP543 0x0640 ++ ++/* Devices based on the IXP422 */ ++#define DEVID_COMPEX_WP18 0x047E ++#define DEVID_COMPEX_NP18A 0x0489 ++ ++/* Other devices */ ++#define DEVID_COMPEX_NP26G8M 0x03E8 ++#define DEVID_COMPEX_NP26G16M 0x03E9 ++ ++struct mylo_partition { ++ uint16_t flags; /* partition flags */ ++ uint16_t type; /* type of the partition */ ++ uint32_t addr; /* relative address of the partition from the ++ flash start */ ++ uint32_t size; /* size of the partition in bytes */ ++ uint32_t param; /* if this is the active partition, the ++ MyLoader load code to this address */ ++}; ++ ++#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, ++ * MyLoader loads firmware from here */ ++#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ ++#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ ++#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM ++ * before decompression */ ++#define PARTITION_FLAG_LZMA 0x0100 /* partition data compressed by LZMA */ ++#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ ++ ++#define PARTITION_TYPE_FREE 0 ++#define PARTITION_TYPE_USED 1 ++ ++#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the ++ partition table */ ++ ++struct mylo_partition_table { ++ uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ ++ uint32_t res0; /* unknown/unused */ ++ uint32_t res1; /* unknown/unused */ ++ uint32_t res2; /* unknown/unused */ ++ struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; ++}; ++ ++struct mylo_partition_header { ++ uint32_t len; /* length of the partition data */ ++ uint32_t crc; /* CRC value of the partition data */ ++}; ++ ++struct mylo_system_params { ++ uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ ++ uint32_t res0; ++ uint32_t res1; ++ uint32_t mylo_ver; ++ uint16_t vid; /* Vendor ID */ ++ uint16_t did; /* Device ID */ ++ uint16_t svid; /* Sub Vendor ID */ ++ uint16_t sdid; /* Sub Device ID */ ++ uint32_t rev; /* device revision */ ++ uint32_t fwhi; ++ uint32_t fwlo; ++ uint32_t tftp_addr; ++ uint32_t prog_start; ++ uint32_t flash_size; /* size of boot FLASH in bytes */ ++ uint32_t dram_size; /* size of onboard RAM in bytes */ ++}; ++ ++struct mylo_eth_addr { ++ uint8_t mac[6]; ++ uint8_t csum[2]; ++}; ++ ++#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address ++ in the board parameters */ ++ ++struct mylo_board_params { ++ uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ ++ uint32_t res0; ++ uint32_t res1; ++ uint32_t res2; ++ struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; ++}; ++ ++#endif /* _MYLOADER_H_*/ +diff -Nur linux-2.6.39.orig/include/linux/netdevice.h linux-2.6.39/include/linux/netdevice.h +--- linux-2.6.39.orig/include/linux/netdevice.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/include/linux/netdevice.h 2011-08-22 22:00:06.937981400 +0200 +@@ -1182,6 +1182,7 @@ + void *ax25_ptr; /* AX.25 specific data */ + struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data, + assign before registering */ ++ void *phy_ptr; /* PHY device specific data */ + + /* + * Cache lines mostly used on receive path (including eth_type_trans()) +diff -Nur linux-2.6.39.orig/include/linux/nxp_74hc153.h linux-2.6.39/include/linux/nxp_74hc153.h +--- linux-2.6.39.orig/include/linux/nxp_74hc153.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/include/linux/nxp_74hc153.h 2011-04-27 12:19:21.817661653 +0200 +@@ -0,0 +1,24 @@ ++/* ++ * NXP 74HC153 - Dual 4-input multiplexer defines ++ * ++ * Copyright (C) 2010 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ + -+ phy_addr = ar7240_iort_to_phy_addr(port); -+ if (phy_addr < 0) -+ return 0xffff; ++#ifndef _NXP_74HC153_H ++#define _NXP_74HC153_H + -+ return ar7240sw_phy_read(as, phy_addr, regnum); -+} ++#define NXP_74HC153_DRIVER_NAME "nxp-74hc153" + -+static int ar7240_dsa_phy_write(struct dsa_switch *ds, int port, int regnum, -+ u16 val) -+{ -+ struct ar7240sw *as = dsa_to_ar7240sw(ds); -+ int phy_addr; ++struct nxp_74hc153_platform_data { ++ unsigned gpio_base; ++ unsigned gpio_pin_s0; ++ unsigned gpio_pin_s1; ++ unsigned gpio_pin_1y; ++ unsigned gpio_pin_2y; ++}; + -+ phy_addr = ar7240_iort_to_phy_addr(port); -+ if (phy_addr < 0) -+ return 0xffff; ++#endif /* _NXP_74HC153_H */ +diff -Nur linux-2.6.39.orig/include/linux/phy.h linux-2.6.39/include/linux/phy.h +--- linux-2.6.39.orig/include/linux/phy.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/include/linux/phy.h 2011-08-22 22:00:06.867980866 +0200 +@@ -332,6 +332,20 @@ + void (*adjust_link)(struct net_device *dev); + + void (*adjust_state)(struct net_device *dev); + -+ return ar7240sw_phy_write(as, phy_addr, regnum, val); -+} ++ /* ++ * By default these point to the original functions ++ * with the same name. adding them to the phy_device ++ * allows the phy driver to override them for packet ++ * mangling if the ethernet driver supports it ++ * This is required to support some really horrible ++ * switches such as the Marvell 88E6060 ++ */ ++ int (*netif_receive_skb)(struct sk_buff *skb); ++ int (*netif_rx)(struct sk_buff *skb); + -+static const char *ar7240sw_speed_str(unsigned speed) -+{ -+ switch (speed) { -+ case AR7240_PORT_STATUS_SPEED_10: -+ return "10"; -+ case AR7240_PORT_STATUS_SPEED_100: -+ return "100"; -+ case AR7240_PORT_STATUS_SPEED_1000: -+ return "1000"; -+ } ++ /* alignment offset for packets */ ++ int pkt_align; + }; + #define to_phy_device(d) container_of(d, struct phy_device, dev) + +@@ -508,6 +522,7 @@ + void phy_stop_machine(struct phy_device *phydev); + int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); + int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); ++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr); + int phy_mii_ioctl(struct phy_device *phydev, + struct ifreq *ifr, int cmd); + int phy_start_interrupts(struct phy_device *phydev); +diff -Nur linux-2.6.39.orig/include/linux/spi/spi.h linux-2.6.39/include/linux/spi/spi.h +--- linux-2.6.39.orig/include/linux/spi/spi.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/include/linux/spi/spi.h 2011-08-23 15:10:37.559229523 +0200 +@@ -441,6 +441,8 @@ + dma_addr_t rx_dma; + + unsigned cs_change:1; ++ unsigned verify:1; ++ unsigned fast_write:1; + u8 bits_per_word; + u16 delay_usecs; + u32 speed_hz; +@@ -482,6 +484,7 @@ + struct spi_device *spi; + + unsigned is_dma_mapped:1; ++ unsigned fast_read:1; + + /* REVISIT: we might want a flag affecting the behavior of the + * last transfer ... allowing things like "read 16 bit length L" +diff -Nur linux-2.6.39.orig/include/linux/spi/vsc7385.h linux-2.6.39/include/linux/spi/vsc7385.h +--- linux-2.6.39.orig/include/linux/spi/vsc7385.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/include/linux/spi/vsc7385.h 2011-04-27 12:19:21.817661653 +0200 +@@ -0,0 +1,19 @@ ++/* ++ * Platform data definition for the Vitesse VSC7385 ethernet switch driver ++ * ++ * Copyright (C) 2009 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+ return "????"; -+} ++struct vsc7385_platform_data { ++ void (*reset)(void); ++ char *ucode_name; ++ struct { ++ u32 tx_ipg:5; ++ u32 bit2:1; ++ u32 clk_sel:3; ++ } mac_cfg; ++}; +diff -Nur linux-2.6.39.orig/include/linux/switch.h linux-2.6.39/include/linux/switch.h +--- linux-2.6.39.orig/include/linux/switch.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/include/linux/switch.h 2011-08-22 22:09:59.799231408 +0200 +@@ -0,0 +1,204 @@ ++/* ++ * switch.h: Switch configuration API ++ * ++ * Copyright (C) 2008 Felix Fietkau ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ + -+static void ar7240_dsa_poll_link(struct dsa_switch *ds) -+{ -+ struct ar7240sw *as = dsa_to_ar7240sw(ds); -+ int i; ++#ifndef __LINUX_SWITCH_H ++#define __LINUX_SWITCH_H + -+ for (i = 0; i < DSA_MAX_PORTS; i++) { -+ struct net_device *dev; -+ u32 status; -+ int link; -+ unsigned speed; -+ int duplex; ++#include ++#include ++#include ++#include ++#ifndef __KERNEL__ ++#include ++#include ++#include ++#else ++#include ++#endif + -+ dev = ds->ports[i]; -+ if (dev == NULL) -+ continue; ++/* main attributes */ ++enum { ++ SWITCH_ATTR_UNSPEC, ++ /* global */ ++ SWITCH_ATTR_TYPE, ++ /* device */ ++ SWITCH_ATTR_ID, ++ SWITCH_ATTR_DEV_NAME, ++ SWITCH_ATTR_ALIAS, ++ SWITCH_ATTR_NAME, ++ SWITCH_ATTR_VLANS, ++ SWITCH_ATTR_PORTS, ++ SWITCH_ATTR_CPU_PORT, ++ /* attributes */ ++ SWITCH_ATTR_OP_ID, ++ SWITCH_ATTR_OP_TYPE, ++ SWITCH_ATTR_OP_NAME, ++ SWITCH_ATTR_OP_PORT, ++ SWITCH_ATTR_OP_VLAN, ++ SWITCH_ATTR_OP_VALUE_INT, ++ SWITCH_ATTR_OP_VALUE_STR, ++ SWITCH_ATTR_OP_VALUE_PORTS, ++ SWITCH_ATTR_OP_DESCRIPTION, ++ /* port lists */ ++ SWITCH_ATTR_PORT, ++ SWITCH_ATTR_MAX ++}; ++ ++/* commands */ ++enum { ++ SWITCH_CMD_UNSPEC, ++ SWITCH_CMD_GET_SWITCH, ++ SWITCH_CMD_NEW_ATTR, ++ SWITCH_CMD_LIST_GLOBAL, ++ SWITCH_CMD_GET_GLOBAL, ++ SWITCH_CMD_SET_GLOBAL, ++ SWITCH_CMD_LIST_PORT, ++ SWITCH_CMD_GET_PORT, ++ SWITCH_CMD_SET_PORT, ++ SWITCH_CMD_LIST_VLAN, ++ SWITCH_CMD_GET_VLAN, ++ SWITCH_CMD_SET_VLAN ++}; ++ ++/* data types */ ++enum switch_val_type { ++ SWITCH_TYPE_UNSPEC, ++ SWITCH_TYPE_INT, ++ SWITCH_TYPE_STRING, ++ SWITCH_TYPE_PORTS, ++ SWITCH_TYPE_NOVAL, ++}; ++ ++/* port nested attributes */ ++enum { ++ SWITCH_PORT_UNSPEC, ++ SWITCH_PORT_ID, ++ SWITCH_PORT_FLAG_TAGGED, ++ SWITCH_PORT_ATTR_MAX ++}; ++ ++#define SWITCH_ATTR_DEFAULTS_OFFSET 0x1000 ++ ++#ifdef __KERNEL__ ++ ++struct switch_dev; ++struct switch_op; ++struct switch_val; ++struct switch_attr; ++struct switch_attrlist; ++ ++int register_switch(struct switch_dev *dev, struct net_device *netdev); ++void unregister_switch(struct switch_dev *dev); ++ ++/** ++ * struct switch_attrlist - attribute list ++ * ++ * @n_attr: number of attributes ++ * @attr: pointer to the attributes array ++ */ ++struct switch_attrlist { ++ int n_attr; ++ const struct switch_attr *attr; ++}; + -+ link = 0; -+ if (dev->flags & IFF_UP) { -+ status = ar7240sw_reg_read(as, -+ AR7240_REG_PORT_STATUS(i)); -+ link = !!(status & AR7240_PORT_STATUS_LINK_UP); -+ } ++/** ++ * struct switch_dev_ops - switch driver operations ++ * ++ * @attr_global: global switch attribute list ++ * @attr_port: port attribute list ++ * @attr_vlan: vlan attribute list ++ * ++ * Callbacks: ++ * ++ * @get_vlan_ports: read the port list of a VLAN ++ * @set_vlan_ports: set the port list of a VLAN ++ * ++ * @get_port_pvid: get the primary VLAN ID of a port ++ * @set_port_pvid: set the primary VLAN ID of a port ++ * ++ * @apply_config: apply all changed settings to the switch ++ * @reset_switch: resetting the switch ++ */ ++struct switch_dev_ops { ++ struct switch_attrlist attr_global, attr_port, attr_vlan; + -+ if (!link) { -+ if (netif_carrier_ok(dev)) { -+ pr_info("%s: link down\n", dev->name); -+ netif_carrier_off(dev); -+ } -+ continue; -+ } ++ int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val); ++ int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val); + -+ speed = (status & AR7240_PORT_STATUS_SPEED_M); -+ duplex = (status & AR7240_PORT_STATUS_DUPLEX) ? 1 : 0; -+ if (!netif_carrier_ok(dev)) { -+ pr_info("%s: link up, %sMb/s, %s duplex", -+ dev->name, -+ ar7240sw_speed_str(speed), -+ duplex ? "full" : "half"); -+ netif_carrier_on(dev); -+ } -+ } -+} ++ int (*get_port_pvid)(struct switch_dev *dev, int port, int *val); ++ int (*set_port_pvid)(struct switch_dev *dev, int port, int val); + -+static const struct ar7240sw_hw_stat ar7240_hw_stats[] = { -+ { "rx_broadcast" , 4, AR7240_STATS_RXBROAD, }, -+ { "rx_pause" , 4, AR7240_STATS_RXPAUSE, }, -+ { "rx_multicast" , 4, AR7240_STATS_RXMULTI, }, -+ { "rx_fcs_error" , 4, AR7240_STATS_RXFCSERR, }, -+ { "rx_align_error" , 4, AR7240_STATS_RXALIGNERR, }, -+ { "rx_undersize" , 4, AR7240_STATS_RXRUNT, }, -+ { "rx_fragments" , 4, AR7240_STATS_RXFRAGMENT, }, -+ { "rx_64bytes" , 4, AR7240_STATS_RX64BYTE, }, -+ { "rx_65_127bytes" , 4, AR7240_STATS_RX128BYTE, }, -+ { "rx_128_255bytes" , 4, AR7240_STATS_RX256BYTE, }, -+ { "rx_256_511bytes" , 4, AR7240_STATS_RX512BYTE, }, -+ { "rx_512_1023bytes" , 4, AR7240_STATS_RX1024BYTE, }, -+ { "rx_1024_1518bytes" , 4, AR7240_STATS_RX1518BYTE, }, -+ { "rx_1519_max_bytes" , 4, AR7240_STATS_RXMAXBYTE, }, -+ { "rx_oversize" , 4, AR7240_STATS_RXTOOLONG, }, -+ { "rx_good_bytes" , 8, AR7240_STATS_RXGOODBYTE, }, -+ { "rx_bad_bytes" , 8, AR7240_STATS_RXBADBYTE, }, -+ { "rx_overflow" , 4, AR7240_STATS_RXOVERFLOW, }, -+ { "filtered" , 4, AR7240_STATS_FILTERED, }, -+ { "tx_broadcast" , 4, AR7240_STATS_TXBROAD, }, -+ { "tx_pause" , 4, AR7240_STATS_TXPAUSE, }, -+ { "tx_multicast" , 4, AR7240_STATS_TXMULTI, }, -+ { "tx_underrun" , 4, AR7240_STATS_TXUNDERRUN, }, -+ { "tx_64bytes" , 4, AR7240_STATS_TX64BYTE, }, -+ { "tx_65_127bytes" , 4, AR7240_STATS_TX128BYTE, }, -+ { "tx_128_255bytes" , 4, AR7240_STATS_TX256BYTE, }, -+ { "tx_256_511bytes" , 4, AR7240_STATS_TX512BYTE, }, -+ { "tx_512_1023bytes" , 4, AR7240_STATS_TX1024BYTE, }, -+ { "tx_1024_1518bytes" , 4, AR7240_STATS_TX1518BYTE, }, -+ { "tx_1519_max_bytes" , 4, AR7240_STATS_TXMAXBYTE, }, -+ { "tx_oversize" , 4, AR7240_STATS_TXOVERSIZE, }, -+ { "tx_bytes" , 8, AR7240_STATS_TXBYTE, }, -+ { "tx_collisions" , 4, AR7240_STATS_TXCOLLISION, }, -+ { "tx_abort_collisions" , 4, AR7240_STATS_TXABORTCOL, }, -+ { "tx_multi_collisions" , 4, AR7240_STATS_TXMULTICOL, }, -+ { "tx_single_collisions", 4, AR7240_STATS_TXSINGLECOL, }, -+ { "tx_excessive_deferred", 4, AR7240_STATS_TXEXCDEFER, }, -+ { "tx_deferred" , 4, AR7240_STATS_TXDEFER, }, -+ { "tx_late_collisions" , 4, AR7240_STATS_TXLATECOL, }, -+}; -+ -+static void ar7240_dsa_get_strings(struct dsa_switch *ds, int port, -+ uint8_t *data) -+{ -+ int i; ++ int (*apply_config)(struct switch_dev *dev); ++ int (*reset_switch)(struct switch_dev *dev); ++}; + -+ for (i = 0; i < ARRAY_SIZE(ar7240_hw_stats); i++) { -+ memcpy(data + i * ETH_GSTRING_LEN, -+ ar7240_hw_stats[i].string, ETH_GSTRING_LEN); -+ } -+} ++struct switch_dev { ++ const struct switch_dev_ops *ops; ++ /* will be automatically filled */ ++ char devname[IFNAMSIZ]; + -+static void ar7240_dsa_get_ethtool_stats(struct dsa_switch *ds, int port, -+ uint64_t *data) -+{ -+ struct ar7240sw *as = dsa_to_ar7240sw(ds); -+ int err; -+ int i; ++ const char *name; ++ /* NB: either alias or netdev must be set */ ++ const char *alias; ++ struct net_device *netdev; + -+ mutex_lock(&as->stats_mutex); ++ int ports; ++ int vlans; ++ int cpu_port; + -+ err = ar7240sw_capture_stats(as); -+ if (err) -+ goto unlock; ++ /* the following fields are internal for swconfig */ ++ int id; ++ struct list_head dev_list; ++ unsigned long def_global, def_port, def_vlan; + -+ for (i = 0; i < ARRAY_SIZE(ar7240_hw_stats); i++) { -+ const struct ar7240sw_hw_stat *s = &ar7240_hw_stats[i]; -+ u32 reg = AR7240_REG_STATS_BASE(port); -+ u32 low; -+ u32 high; ++ spinlock_t lock; ++ struct switch_port *portbuf; ++}; + -+ low = ar7240sw_reg_read(as, reg + s->reg); -+ if (s->sizeof_stat == 8) -+ high = ar7240sw_reg_read(as, reg + s->reg); -+ else -+ high = 0; ++struct switch_port { ++ u32 id; ++ u32 flags; ++}; + -+ data[i] = (((u64) high) << 32) | low; -+ } ++struct switch_val { ++ const struct switch_attr *attr; ++ int port_vlan; ++ int len; ++ union { ++ const char *s; ++ u32 i; ++ struct switch_port *ports; ++ } value; ++}; + -+ unlock: -+ mutex_unlock(&as->stats_mutex); -+} ++struct switch_attr { ++ int disabled; ++ int type; ++ const char *name; ++ const char *description; + -+static int ar7240_dsa_get_sset_count(struct dsa_switch *ds) -+{ -+ return ARRAY_SIZE(ar7240_hw_stats); -+} ++ int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); ++ int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val); + -+static struct dsa_switch_driver ar7240_dsa_driver = { -+ .tag_protocol = htons(ETH_P_QINQ), -+ .priv_size = sizeof(struct ar7240sw), -+ .probe = ar7240_dsa_probe, -+ .setup = ar7240_dsa_setup, -+ .set_addr = ar7240_dsa_set_addr, -+ .phy_read = ar7240_dsa_phy_read, -+ .phy_write = ar7240_dsa_phy_write, -+ .poll_link = ar7240_dsa_poll_link, -+ .get_strings = ar7240_dsa_get_strings, -+ .get_ethtool_stats = ar7240_dsa_get_ethtool_stats, -+ .get_sset_count = ar7240_dsa_get_sset_count, ++ /* for driver internal use */ ++ int id; ++ int ofs; ++ int max; +}; + -+int __init dsa_ar7240_init(void) -+{ -+ register_switch_driver(&ar7240_dsa_driver); -+ return 0; -+} -+module_init(dsa_ar7240_init); ++#endif + -+void __exit dsa_ar7240_cleanup(void) -+{ -+ unregister_switch_driver(&ar7240_dsa_driver); -+} -+module_exit(dsa_ar7240_cleanup); ++#endif +diff -Nur linux-2.6.39.orig/include/linux/tcp.h linux-2.6.39/include/linux/tcp.h +--- linux-2.6.39.orig/include/linux/tcp.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/include/linux/tcp.h 2011-08-24 05:53:21.379228748 +0200 +@@ -54,7 +54,7 @@ + __be16 window; + __sum16 check; + __be16 urg_ptr; +-}; ++} __packed; + + /* + * The union cast uses a gcc extension to avoid aliasing problems +diff -Nur linux-2.6.39.orig/include/linux/udp.h linux-2.6.39/include/linux/udp.h +--- linux-2.6.39.orig/include/linux/udp.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/include/linux/udp.h 2011-08-24 05:53:21.428824967 +0200 +@@ -24,7 +24,7 @@ + __be16 dest; + __be16 len; + __sum16 check; +-}; ++} __packed; + + /* UDP socket options */ + #define UDP_CORK 1 /* Never send partially complete segments */ diff -Nur linux-2.6.39.orig/net/dsa/mv88e6063.c linux-2.6.39/net/dsa/mv88e6063.c --- linux-2.6.39.orig/net/dsa/mv88e6063.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/net/dsa/mv88e6063.c 2011-05-27 14:36:51.000000000 +0200 ++++ linux-2.6.39/net/dsa/mv88e6063.c 2011-04-27 12:19:21.827661792 +0200 @@ -0,0 +1,294 @@ +/* + * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips @@ -18297,134 +28270,25 @@ diff -Nur linux-2.6.39.orig/net/dsa/mv88e6063.c linux-2.6.39/net/dsa/mv88e6063.c + unregister_switch_driver(&mv88e6063_switch_driver); +} +module_exit(mv88e6063_cleanup); -diff -Nur linux-2.6.39.orig/net/dsa/tag_qinq.c linux-2.6.39/net/dsa/tag_qinq.c ---- linux-2.6.39.orig/net/dsa/tag_qinq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/net/dsa/tag_qinq.c 2011-05-27 14:36:51.000000000 +0200 -@@ -0,0 +1,127 @@ -+/* -+ * net/dsa/tag_qinq.c - QinQ tag format handling -+ * Copyright (c) 2010 Gabor Juhos -+ * -+ * This file was based on: -+ * net/dsa/tag_edsa.c - Ethertype DSA tagging -+ * Copyright (c) 2008-2009 Marvell Semiconductor -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include "dsa_priv.h" -+ -+netdev_tx_t qinq_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct dsa_slave_priv *p = netdev_priv(dev); -+ struct vlan_ethhdr *veth; -+ unsigned int len; -+ int ret; -+ -+ if (skb_cow_head(skb, VLAN_HLEN) < 0) -+ goto out_free_skb; -+ -+ veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN); -+ -+ /* Move the mac addresses to the beginning of the new header. */ -+ memmove(skb->data, skb->data + VLAN_HLEN, 2 * VLAN_ETH_ALEN); -+ skb->mac_header -= VLAN_HLEN; -+ -+ /* setup VLAN header fields */ -+ veth->h_vlan_proto = htons(ETH_P_QINQ); -+ veth->h_vlan_TCI = htons(p->port); -+ -+ len = skb->len; -+ skb->protocol = htons(ETH_P_QINQ); -+ skb->dev = p->parent->dst->master_netdev; -+ -+ ret = dev_queue_xmit(skb); -+ if (unlikely(ret != NET_XMIT_SUCCESS)) -+ goto out_dropped; -+ -+ dev->stats.tx_packets++; -+ dev->stats.tx_bytes += len; -+ -+ return NETDEV_TX_OK; -+ -+ out_free_skb: -+ kfree_skb(skb); -+ out_dropped: -+ dev->stats.tx_dropped++; -+ return NETDEV_TX_OK; -+} -+ -+static int qinq_rcv(struct sk_buff *skb, struct net_device *dev, -+ struct packet_type *pt, struct net_device *orig_dev) -+{ -+ struct dsa_switch_tree *dst; -+ struct dsa_switch *ds; -+ struct vlan_hdr *vhdr; -+ int source_port; -+ -+ dst = dev->dsa_ptr; -+ if (unlikely(dst == NULL)) -+ goto out_drop; -+ ds = dst->ds[0]; -+ -+ skb = skb_unshare(skb, GFP_ATOMIC); -+ if (skb == NULL) -+ goto out; -+ -+ if (unlikely(!pskb_may_pull(skb, VLAN_HLEN))) -+ goto out_drop; -+ -+ vhdr = (struct vlan_hdr *)skb->data; -+ source_port = ntohs(vhdr->h_vlan_TCI) & VLAN_VID_MASK; -+ if (source_port >= DSA_MAX_PORTS || ds->ports[source_port] == NULL) -+ goto out_drop; -+ -+ /* Remove the outermost VLAN tag and update checksum. */ -+ skb_pull_rcsum(skb, VLAN_HLEN); -+ memmove(skb->data - ETH_HLEN, -+ skb->data - ETH_HLEN - VLAN_HLEN, -+ 2 * ETH_ALEN); -+ -+ skb->dev = ds->ports[source_port]; -+ skb_push(skb, ETH_HLEN); -+ skb->pkt_type = PACKET_HOST; -+ skb->protocol = eth_type_trans(skb, skb->dev); -+ -+ skb->dev->stats.rx_packets++; -+ skb->dev->stats.rx_bytes += skb->len; -+ -+ netif_receive_skb(skb); -+ -+ return 0; -+ -+ out_drop: -+ kfree_skb(skb); -+ out: -+ return 0; -+} -+ -+static struct packet_type qinq_packet_type __read_mostly = { -+ .type = cpu_to_be16(ETH_P_QINQ), -+ .func = qinq_rcv, -+}; -+ -+static int __init qinq_init_module(void) -+{ -+ dev_add_pack(&qinq_packet_type); -+ return 0; -+} -+module_init(qinq_init_module); -+ -+static void __exit qinq_cleanup_module(void) -+{ -+ dev_remove_pack(&qinq_packet_type); -+} -+module_exit(qinq_cleanup_module); +diff -Nur linux-2.6.39.orig/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c linux-2.6.39/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +--- linux-2.6.39.orig/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c 2011-08-24 05:53:21.549229118 +0200 +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -44,8 +45,8 @@ + if (ap == NULL) + return false; + +- tuple->src.u3.ip = ap[0]; +- tuple->dst.u3.ip = ap[1]; ++ tuple->src.u3.ip = __get_unaligned_cpu32(ap++); ++ tuple->dst.u3.ip = __get_unaligned_cpu32(ap); + + return true; + } diff --git a/target/mips/Makefile b/target/mips/Makefile index 5d606046f..00a3e8bdc 100644 --- a/target/mips/Makefile +++ b/target/mips/Makefile @@ -51,11 +51,7 @@ ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB532),y) kernel-install: $(TARGET_CROSS)objcopy $(OSTRIP) -S $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) endif -ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB411),y) -kernel-install: - $(TARGET_CROSS)objcopy $(OSTRIP) -S $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) -endif -ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB433),y) +ifeq ($(ADK_TARGET_SYSTEM_MIKROTIK_RB4XX),y) kernel-install: $(TARGET_CROSS)objcopy $(OSTRIP) -S $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) endif diff --git a/target/mips/kernel.config b/target/mips/kernel.config index bdf5beb9f..4bc717861 100644 --- a/target/mips/kernel.config +++ b/target/mips/kernel.config @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux/mips 2.6.37 Kernel Configuration -# Sat Apr 23 20:38:50 2011 +# Linux/mips 2.6.39 Kernel Configuration +# Mon Aug 22 22:28:08 2011 # CONFIG_MIPS=y @@ -10,6 +10,7 @@ CONFIG_MIPS=y # # CONFIG_MIPS_ALCHEMY is not set # CONFIG_AR7 is not set +# CONFIG_ATH79 is not set # CONFIG_ATHEROS_AR71XX is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set @@ -52,11 +53,11 @@ CONFIG_MACH_LOONGSON=y # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set # CONFIG_ALCHEMY_GPIO_INDIRECT is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_CAVIUM_OCTEON_HELPER=y # CONFIG_LEMOTE_FULOONG2E is not set CONFIG_LEMOTE_MACH2F=y CONFIG_CS5536=y # CONFIG_CS5536_MFGPT is not set +CONFIG_LOONGSON_SUSPEND=y CONFIG_LOONGSON_UART_BASE=y CONFIG_LOONGSON_MC146818=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -64,16 +65,17 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_FIND_BIT_LE=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_CEVT_R4K_LIB=y CONFIG_CEVT_R4K=y CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DMA_NONCOHERENT=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_SYS_HAS_EARLY_PRINTK=y @@ -98,7 +100,6 @@ CONFIG_CPU_NOP_WORKAROUNDS=y CONFIG_CPU_JUMP_WORKAROUNDS=y CONFIG_CPU_LOONGSON2F_WORKAROUNDS=y CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y CONFIG_CPU_LOONGSON2=y CONFIG_SYS_HAS_CPU_LOONGSON2F=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y @@ -132,6 +133,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_COMPACTION is not set CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y @@ -141,7 +143,6 @@ CONFIG_NEED_PER_CPU_KM=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_CPU_SUPPORTS_HR_SCHED_CLOCK=y # CONFIG_HZ_48 is not set CONFIG_HZ_100=y # CONFIG_HZ_128 is not set @@ -161,6 +162,7 @@ CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y +CONFIG_HAVE_IRQ_WORK=y # # General setup @@ -184,6 +186,7 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_FHANDLE is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set CONFIG_HAVE_GENERIC_HARDIRQS=y @@ -192,31 +195,28 @@ CONFIG_HAVE_GENERIC_HARDIRQS=y # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y -# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set -# CONFIG_HAVE_SPARSE_IRQ is not set CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_PENDING_IRQ is not set -# CONFIG_AUTO_IRQ_AFFINITY is not set -# CONFIG_IRQ_PER_CPU is not set -# CONFIG_HARDIRQS_SW_RESEND is not set +CONFIG_GENERIC_IRQ_SHOW=y # # RCU Subsystem # CONFIG_TINY_RCU=y # CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set # CONFIG_NAMESPACES is not set +# CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y +CONFIG_EXPERT=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -233,6 +233,7 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_EMBEDDED=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y @@ -250,11 +251,13 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +# CONFIG_JUMP_LABEL is not set CONFIG_HAVE_SYSCALL_WRAPPERS=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y # # GCOV-based kernel profiling @@ -299,7 +302,7 @@ CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set -# CONFIG_FREEZER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -314,6 +317,7 @@ CONFIG_ISA=y CONFIG_MMU=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_RAPIDIO is not set # # Executable file formats @@ -333,7 +337,12 @@ CONFIG_BINFMT_ELF32=y # CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_PM_SLEEP=y +# CONFIG_PM_RUNTIME is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set CONFIG_NET=y # @@ -345,7 +354,6 @@ CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set @@ -376,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -389,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set +# CONFIG_BATMAN_ADV is not set # # Network testing @@ -399,7 +409,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,7 +457,110 @@ CONFIG_SCSI_MOD=y # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set -# CONFIG_NETDEVICES is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_MII is not set +CONFIG_PHYLIB=y +CONFIG_SWCONFIG=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_BCM63XX_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_STMMAC_ETH is not set +# CONFIG_PCH_GBE is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_BNA is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set +# CONFIG_TR is not set +CONFIG_WLAN=y +# CONFIG_AIRO is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_HOSTAP is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set + +# +# CAIF transport drivers +# +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -460,10 +579,13 @@ CONFIG_SCSI_MOD=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_N_GSM is not set # CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_DEVKMEM is not set # # Serial drivers @@ -485,9 +607,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_PCH_UART is not set # CONFIG_TTY_PRINTK is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -495,7 +615,6 @@ CONFIG_UNIX98_PTYS=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_GPIO_DEVICE is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_RAMOOPS is not set @@ -506,6 +625,10 @@ CONFIG_DEVPORT=y # PPS support # # CONFIG_PPS is not set + +# +# PPS generators support +# CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set @@ -515,8 +638,6 @@ CONFIG_GPIOLIB=y # # CONFIG_GPIO_BASIC_MMIO is not set # CONFIG_GPIO_IT8761E is not set -# CONFIG_GPIO_SCH is not set -# CONFIG_GPIO_VX855 is not set # # I2C GPIO expanders: @@ -525,10 +646,8 @@ CONFIG_GPIOLIB=y # # PCI GPIO expanders: # -# CONFIG_GPIO_CS5535 is not set # CONFIG_GPIO_BT8XX is not set -# CONFIG_GPIO_LANGWELL is not set -# CONFIG_GPIO_PCH is not set +# CONFIG_GPIO_ML_IOH is not set # CONFIG_GPIO_RDC321X is not set # @@ -578,6 +697,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_NFC_DEVICES is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set @@ -586,33 +706,37 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_UIO is not set CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_ET131X is not set # CONFIG_ECHO is not set +# CONFIG_BRCM80211 is not set # CONFIG_COMEDI is not set +# CONFIG_R8187SE is not set +# CONFIG_RTL8192E is not set # CONFIG_POHMELFS is not set -# CONFIG_AUTOFS_FS is not set +# CONFIG_VT6655 is not set # CONFIG_VME_BUS is not set +# CONFIG_DX_SEP is not set # CONFIG_IIO is not set -# CONFIG_BATMAN_ADV is not set +# CONFIG_XVMALLOC is not set # CONFIG_CRYSTALHD is not set - -# -# Texas Instruments shared transport line discipline -# -# CONFIG_SMB_FS is not set CONFIG_MACH_NO_WESTBRIDGE=y # CONFIG_FT1000 is not set # # Speakup console speech # -CONFIG_MIPS_PLATFORM_DEVICES=y -# CONFIG_LEMOTE_LYNLOONG2F is not set + +# +# Altera FPGA firmware download module +# # # File systems # +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y -# CONFIG_FSNOTIFY is not set +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set # CONFIG_FANOTIFY is not set @@ -641,13 +765,13 @@ CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # CONFIG_NLS is not set -# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 @@ -656,9 +780,9 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_HARDLOCKUP_DETECTOR is not set -CONFIG_BKL=y # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -674,6 +798,7 @@ CONFIG_TRACING_SUPPORT=y # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_TEST_KSTRTOX is not set CONFIG_EARLY_PRINTK=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="init=/init" @@ -694,6 +819,7 @@ CONFIG_DEFAULT_SECURITY="" # OCF Configuration # # CONFIG_OCF_OCF is not set +# CONFIG_VIRTUALIZATION is not set # CONFIG_BINARY_PRINTF is not set # @@ -708,8 +834,10 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_DECOMPRESS_LZMA=y +# CONFIG_XZ_DEC is not set +# CONFIG_XZ_DEC_BCJ is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +# CONFIG_AVERAGE is not set diff --git a/target/mips/sys-available/mikrotik-rb411 b/target/mips/sys-available/mikrotik-rb411 deleted file mode 100644 index 6e1f597b1..000000000 --- a/target/mips/sys-available/mikrotik-rb411 +++ /dev/null @@ -1,13 +0,0 @@ -config ADK_TARGET_SYSTEM_MIKROTIK_RB411 - bool "Mikrotik Routerboard 411" - select ADK_mips - select ADK_big - select ADK_mikrotik_rb411 - select ADK_KERNEL_ATHEROS_AR71XX - select ADK_KERNEL_ATHEROS_MACH_RB4XX - select ADK_TARGET_WITH_MINIPCI - select ADK_TARGET_WITH_WATCHDOG - select ADK_TARGET_WITH_NAND - help - Support for Mikrotik RB411. - diff --git a/target/mips/sys-available/mikrotik-rb433 b/target/mips/sys-available/mikrotik-rb433 deleted file mode 100644 index 107f317a6..000000000 --- a/target/mips/sys-available/mikrotik-rb433 +++ /dev/null @@ -1,13 +0,0 @@ -config ADK_TARGET_SYSTEM_MIKROTIK_RB433 - bool "Mikrotik Routerboard 433" - select ADK_mips - select ADK_big - select ADK_mikrotik_rb433 - select ADK_KERNEL_ATHEROS_AR71XX - select ADK_KERNEL_ATHEROS_MACH_RB4XX - select ADK_TARGET_WITH_MINIPCI - select ADK_TARGET_WITH_WATCHDOG - select ADK_TARGET_WITH_NAND - help - Support for Mikrotik RB433. - diff --git a/target/mips/sys-available/mikrotik-rb4xx b/target/mips/sys-available/mikrotik-rb4xx new file mode 100644 index 000000000..421f4abb7 --- /dev/null +++ b/target/mips/sys-available/mikrotik-rb4xx @@ -0,0 +1,15 @@ +config ADK_TARGET_SYSTEM_MIKROTIK_RB4XX + bool "Mikrotik Routerboard 4xx" + select ADK_mips + select ADK_big + select ADK_mikrotik_rb4xx + select ADK_KERNEL_ATHEROS_AR71XX + select ADK_KERNEL_AR71XX_MACH_RB4XX + select ADK_KERNEL_SPI_RB4XX + select ADK_KERNEL_SPI_RB4XX_CPLD + select ADK_TARGET_WITH_MINIPCI + select ADK_TARGET_WITH_WATCHDOG + select ADK_TARGET_WITH_NAND + help + Support for Mikrotik RB411/RB433. + -- cgit v1.2.3