summaryrefslogtreecommitdiff
path: root/target/sparc
AgeCommit message (Collapse)Author
2018-05-25rework hardware and C library settingsWaldemar Brodkorb
Make the menu system for configuration more intuitive. First choose operating system, then hardware, starting with architecture. Then choose either generic or a sample system. When choosing a sample be more strict in case of MMU or Endianess selection, so a misconfiguration isn't possible. Furthermore put a new top level menu for C library configuration and add Binary format, Instruction set, version selection, float type and any C library specific options. Refactor the duplicate definition of Qemu system versatile and Synopsys NSIM.
2018-01-02uclibc-ng: remove COMPAT_ATEXITWaldemar Brodkorb
2017-09-27sample for SUN JavaStationWaldemar Brodkorb
2017-06-26uclibc-ng: update default configsWaldemar Brodkorb
2017-06-10add sample for sparc ipxWaldemar Brodkorb
2016-12-31uclibc-ng: update default configsWaldemar Brodkorb
2016-12-13uClibc-ng: switch to malloc-standard as default for MMU. applications like ↵Waldemar Brodkorb
kodi crashing with malloc
2016-12-04uclibc-ng: refresh configs, enable sha512Waldemar Brodkorb
2016-03-16disable uClibc-ng obstack, gdb/binutils has its own copyWaldemar Brodkorb
2016-03-07rework menu based config systemWaldemar Brodkorb
After the addition of bare metal toolchains the menu system allowed to create non-valid configurations. I reworked it so we can also add other operating system support if we wish. So first you choose your operating system, then your architecture and endianess, after that your embedded system, emulator or generic device and then you choose your task you want to run. Tasks may be toolchain, a new appliance/application or some preconfigured sets of packages and configurations as kodi, mpd, firefox and more. The tasks are limited to a plausible choice of hardware and software. Deduplicate CPU configuration. You don't wanna compile Kodi for a H8/300 microcontroller ;)
2016-02-07uclibc-ng: simplify config, only use uclibc-ng.config as git master is now ↵Waldemar Brodkorb
1.0 config
2016-01-10update to uClibc-ng 1.0.11, enable argp option, refresh configsWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2015-12-24allow to build leon3 optimized toolchain for sparcWaldemar Brodkorb
2015-11-12do not allow to build broken kernel images with compressionWaldemar Brodkorb
Some targets do not support compressed kernels or initramfs. OpenADK combines both, there is no support for mixed setups. For example Kernel with gzip, initramfs with xz. Qemu-Metag f.e. can only use uncompressed initramfs. The kernel could be compressed, but mixed setup isn't available for now.
2015-10-25disable UCLIBC_HAS_FENV for git configs, tooWaldemar Brodkorb
2015-10-25uClibc-ng: disable UCLIBC_HAS_FENV in the default configWaldemar Brodkorb
2015-10-24add new symbol for systems with tcp/ip but without netdevice. like arc ↵Waldemar Brodkorb
simulator running test-suites with network functions
2015-08-13kernel: make net and block support optionalWaldemar Brodkorb
2015-08-03rework kernel module infrastructureWaldemar Brodkorb
Instead of maintaining mk/modules.mk which defines compilations of related kernel modules to pack together into a single package, follow an automatic approach: For every kernel module found in the modules installation directory, create a single package. There are a few caveats to cover: === Module Loading Order === Upon bootup, module loading is ordered based on the number-prefixed files in /etc/modules.d/. The correct number was previously managed in mk/modules.mk on a per-collection basis. The new approach is to have levels which modules are to be assigned to. Level 0 contains modules with no dependencies at all. Level 1 contains modules which have only level 0 dependencies, and so on. This information is determined at compile-time by make-module-ipkgs.sh. === Module Installation to Target RootFS === Since module packages are created automatically from the modules the script finds, ADK build system has no knowledge about the connection between what the user has selected in menuconfig and the actual module packages. Therefore the earlier approach to install selected packages into rootfs does not hold anymore. Instead, use wildcards to find all packages in firmware directory prefixed by 'kmod-' and install them all (hopefully doing the right thing). === Kernel Version === KERNEL_VERSION now contains KERNEL_RELEASE already By creating a localversion file, make KERNEL_RELEASE part of the kernel's version number (so KERNEL_VERSION is correct in most situations) Signed-off-by: Phil Sutter <phil@nwl.cc>
2015-07-25mark boards as experimentalWaldemar Brodkorb
2015-07-06strip again the sparc kernelWaldemar Brodkorb
2015-07-03use zimage and build kernel without serial drivers, otherwise kernel gets to ↵Waldemar Brodkorb
big for the voyager
2015-04-25refactor the lower case symbols outWaldemar Brodkorb
We don't need this, as ARCH is implicit through the directory. All lower case symbols should be removed now.
2015-04-14enable LDSO_RUNPATH_OF_EXECUTABLE for uClibc-ng git, tooWaldemar Brodkorb
2015-04-14LDSO_RUNPATH_OF_EXECUTABLE is required f.e. for sambaWaldemar Brodkorb
2015-04-02remove deprecated symbolsWaldemar Brodkorb
2015-03-29enable UCLIBC_HAS_UTMP for uClibc-ngWaldemar Brodkorb
2015-03-29long double math does have compile problems with latest uClibcWaldemar Brodkorb
2015-03-23uClibc added a new symbol for utmp supportWaldemar Brodkorb
2015-02-20use MALLOC with GLIBC_COMPAT for all archsWaldemar Brodkorb
Use MALLOC for uClibc/uClibc-ng 1.0. Choice will be removed in uClibc-ng git.
2015-02-18add support for uClibc-ng git masterWaldemar Brodkorb
Add new configs for uClibc-ng master. New symbol UCLIBC_HAS_LINUXTHREADS added. LT.new is removed in master, only LT.old and NPTL exist. CLeanup MMU/NPTL/LT support symbols. Tested with toolchain building for all supported architectures.
2015-02-16prepare for Sun Voyager.Waldemar Brodkorb
Bootloader needs a.out formatted kernel. Unfortunately I get "Illegal instruction" after loading a.out kernel via TFTP. Old gentoo 2.6 kernel boots fine.
2014-12-27enable getopt longWaldemar Brodkorb
2014-09-28always enable pthread debug support as discussed with tgWaldemar Brodkorb
2014-09-08sync with uClibc Makefile, config files will be compatibleWaldemar Brodkorb
2014-09-01update ltp to latest stable upstreamWaldemar Brodkorb
2014-08-20fix some uClibc sparc issues. Disable DO_XSI_MATH for now, because testsuite ↵Waldemar Brodkorb
fails to compile, when enabled. missing bessel float implementation
2014-08-06enable backtrace support by default for uClibc-ngWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2014-07-30fix boot from diskWaldemar Brodkorb
2014-07-30add argp by defaultWaldemar Brodkorb
2014-07-25remove unused symbolWaldemar Brodkorb
2014-07-23enable alpha/sparc for testing, it is brokenWaldemar Brodkorb
2014-07-05add support for uClibc-ng in parallel to uClibc.Waldemar Brodkorb
This helps to find any regressions made in uClibc-ng.
2014-06-29remove RPC from uclibc, use libtirpcWaldemar Brodkorb
2014-06-29handle debug code handling inside OpenADKWaldemar Brodkorb
2014-06-27add ltp package, add more uClibc options to have a wider test rangeWaldemar Brodkorb
2014-06-21s/TOPDIR/ADK_TOPDIR/Waldemar Brodkorb
to avoid namespace collisions in some packages, rename TOPDIR. Sorry you need to make cleandir && make prereq && make
2014-06-08be consistent, do not use - in rootfs namesWaldemar Brodkorb
2014-06-02simplify adding new archWaldemar Brodkorb
Generate all data needed when adding a new arch or system. Recognize any changes in target/*/systems as reported as bug by Joerg.
2014-06-02refactor CPU_ARCH/ARCH variablesWaldemar Brodkorb
After Joerg asked me about the difference between ADK_TARGET_ARCH and ADK_TARGET_CPU_ARCH I recognized many duplication of variables for this information. These patch fixes this up. Use make cleandir && make menuconfig && make