summaryrefslogtreecommitdiff
path: root/target/ppc64
AgeCommit message (Collapse)Author
2017-01-07linux: fix generic kernel compile for ppc64Waldemar Brodkorb
2016-05-11ppc64: enable Altivec required for muslWaldemar Brodkorb
2016-05-11Linux kernel for ppc64 does not like to be built with -mcpu=power7, getting ↵Waldemar Brodkorb
SIGILL for busybox
2016-03-07rework menu based config systemWaldemar Brodkorb
After the addition of bare metal toolchains the menu system allowed to create non-valid configurations. I reworked it so we can also add other operating system support if we wish. So first you choose your operating system, then your architecture and endianess, after that your embedded system, emulator or generic device and then you choose your task you want to run. Tasks may be toolchain, a new appliance/application or some preconfigured sets of packages and configurations as kodi, mpd, firefox and more. The tasks are limited to a plausible choice of hardware and software. Deduplicate CPU configuration. You don't wanna compile Kodi for a H8/300 microcontroller ;)
2016-02-29add a workaround for ppc64 kernel compileWaldemar Brodkorb
2016-01-25allow to build different ppc64 subarchsWaldemar Brodkorb
2016-01-24qemu-system-ppc64 can be used for little-endian, tooWaldemar Brodkorb
2015-11-12do not allow to build broken kernel images with compressionWaldemar Brodkorb
Some targets do not support compressed kernels or initramfs. OpenADK combines both, there is no support for mixed setups. For example Kernel with gzip, initramfs with xz. Qemu-Metag f.e. can only use uncompressed initramfs. The kernel could be compressed, but mixed setup isn't available for now.
2015-10-21force CONFIG_PRINTK=y to fix build failureWaldemar Brodkorb
2015-08-13kernel: make net and block support optionalWaldemar Brodkorb
2015-08-03rework kernel module infrastructureWaldemar Brodkorb
Instead of maintaining mk/modules.mk which defines compilations of related kernel modules to pack together into a single package, follow an automatic approach: For every kernel module found in the modules installation directory, create a single package. There are a few caveats to cover: === Module Loading Order === Upon bootup, module loading is ordered based on the number-prefixed files in /etc/modules.d/. The correct number was previously managed in mk/modules.mk on a per-collection basis. The new approach is to have levels which modules are to be assigned to. Level 0 contains modules with no dependencies at all. Level 1 contains modules which have only level 0 dependencies, and so on. This information is determined at compile-time by make-module-ipkgs.sh. === Module Installation to Target RootFS === Since module packages are created automatically from the modules the script finds, ADK build system has no knowledge about the connection between what the user has selected in menuconfig and the actual module packages. Therefore the earlier approach to install selected packages into rootfs does not hold anymore. Instead, use wildcards to find all packages in firmware directory prefixed by 'kmod-' and install them all (hopefully doing the right thing). === Kernel Version === KERNEL_VERSION now contains KERNEL_RELEASE already By creating a localversion file, make KERNEL_RELEASE part of the kernel's version number (so KERNEL_VERSION is correct in most situations) Signed-off-by: Phil Sutter <phil@nwl.cc>
2015-04-26refactor LINUX_64 support, hide symbol for developers of boardsWaldemar Brodkorb
2015-04-25refactor the lower case symbols outWaldemar Brodkorb
We don't need this, as ARCH is implicit through the directory. All lower case symbols should be removed now.
2014-06-21s/TOPDIR/ADK_TOPDIR/Waldemar Brodkorb
to avoid namespace collisions in some packages, rename TOPDIR. Sorry you need to make cleandir && make prereq && make
2014-06-08be consistent, do not use - in rootfs namesWaldemar Brodkorb
2014-06-02simplify adding new archWaldemar Brodkorb
Generate all data needed when adding a new arch or system. Recognize any changes in target/*/systems as reported as bug by Joerg.
2014-06-02refactor CPU_ARCH/ARCH variablesWaldemar Brodkorb
After Joerg asked me about the difference between ADK_TARGET_ARCH and ADK_TARGET_CPU_ARCH I recognized many duplication of variables for this information. These patch fixes this up. Use make cleandir && make menuconfig && make
2014-05-23fix symbol renaming bugsWaldemar Brodkorb
2014-05-23more cleanup, *-enabled feature is unused, simplifyWaldemar Brodkorb
2014-05-23resolve merge conflictWaldemar Brodkorb
2014-05-23split targethelp from install targetWaldemar Brodkorb
cleanup target/*/Makefile stuff.
2014-05-13resolve merge conflictWaldemar Brodkorb
2014-04-07grub2 by default offWaldemar Brodkorb
2014-03-29use xz instead of gzip, remove grub for qemu, add it only to ibm-x40Waldemar Brodkorb
2014-03-23Merge branch 'master' of git+ssh://openadk.org/git/openadkWaldemar Brodkorb
2014-03-23need ADK_LINUX_&$ hereWaldemar Brodkorb
2014-03-23make optimiztion compiler flags configurable, default -Os -pipeWaldemar Brodkorb
2014-03-18Merge branch 'master' of git+ssh://openadk.org/git/openadkWaldemar Brodkorb
2014-03-18use archive without kernelWaldemar Brodkorb
2014-03-17remove kernel choice, always use 64 bit for 64bit targetWaldemar Brodkorb
2014-03-17fix boot from disk for qemu targetsWaldemar Brodkorb
2014-03-17optimize miniconfigs, enable netstuff by defaultWaldemar Brodkorb
2014-03-16disable block driver for qemu emulators, can be activated via menuconfigWaldemar Brodkorb
2014-03-16remove ADK_TARGET_WITH from qemu configs, is more dynamic. remove device ↵Waldemar Brodkorb
node creation for initramfs.
2014-03-14convert to miniconfigWaldemar Brodkorb
only miniconfig is used for all targets. aranym support is still broken/experimental. 32 bit kernel support for 64 targets need to be fixed. tested on usb boot on ibm-x40
2014-03-01remove armeb, no hardware, no emulator to test, add armhf instead. fix some ↵Waldemar Brodkorb
toolchain archive creation issues, remove unneeded files before packaging.
2014-02-18use bin directory for host binaries only, use new firmware directory for the ↵Waldemar Brodkorb
resulting firmware
2014-02-15use newer kernel for toolchain building, fix some problems with ppc and m68k ↵Waldemar Brodkorb
toolchains
2014-01-22add perl support for ppc64 eglibcWaldemar Brodkorb
2014-01-06add full perl, first half of supported archsWaldemar Brodkorb
2013-11-01fixup ppc64 qemu configWaldemar Brodkorb
2013-09-25fix ppc64 toolchain build, refresh kernel configWaldemar Brodkorb
2012-01-15mk/image.mk: improve and simplify initramfs generationPhil Sutter
Using the kernel tools is a lot better than calling cpio ourselfs, as this way we can have it create device nodes for us. So no need to reopen /dev/console and things like that. While here, fix also initramfs compression (untested), as in my experience the kernel drops all symbols regarding compression from it's .config in the first compile phase. Probably one should make the actual compression algorithm configurable (and ideally depending on what the kernel supports for the given architecture). This is a rough hack based on what I'm using in the custom viprinux build file, so something like this is already running somewhere. ;)
2011-08-24ppc64 works with latest qemu, fix kernel configWaldemar Brodkorb
2011-08-24better ppc64 support, qemu still hangs @ returning from prom_initWaldemar Brodkorb
2011-04-29rework toolchain only optionWaldemar Brodkorb
2011-01-02make bulk fixes. fix toolchain building for sparc64/ppcWaldemar Brodkorb
2010-12-31 should be without path, just the name of the kernelWaldemar Brodkorb
2010-12-31fix native buildsWaldemar Brodkorb
2010-12-30rework architecture / embedded systems conceptWaldemar Brodkorb
Make configuration of new targets cheap. Just add a new file in target/arch/sys-enabled/foo. See other files for syntax. While doing runtime tests with the new infrastructure I've updated a lot of other stuff: - gcc 4.5.2 - uClibc 0.9.32-rc1 (NPTL) - strongswan, php, miredo, parted, util-linux-ng, e2fsprogs I promise, this is the last big fat commit this year ;)