summaryrefslogtreecommitdiff
path: root/target/config/Config.in.target
AgeCommit message (Collapse)Author
2016-06-30add support for nds32 architectureWaldemar Brodkorb
Verified on a FPGA board sponsored by Andes Technology. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2016-03-07rework menu based config systemWaldemar Brodkorb
After the addition of bare metal toolchains the menu system allowed to create non-valid configurations. I reworked it so we can also add other operating system support if we wish. So first you choose your operating system, then your architecture and endianess, after that your embedded system, emulator or generic device and then you choose your task you want to run. Tasks may be toolchain, a new appliance/application or some preconfigured sets of packages and configurations as kodi, mpd, firefox and more. The tasks are limited to a plausible choice of hardware and software. Deduplicate CPU configuration. You don't wanna compile Kodi for a H8/300 microcontroller ;)
2015-12-26add experimental support for xtensa de212 coreWaldemar Brodkorb
2015-12-26split rootfs options from target configWaldemar Brodkorb
2015-12-23optimize for really small systemsWaldemar Brodkorb
Default to busybox hush for noMMU systems. Add busybox profiles to choose a minimal busybox config for noMMU systems. Add gdb git from ysato for h8/300 simulator. Change some kernel defaults to off to have a really small kernel. For bfin simulator the kernel+initramfs is smaller then 2MB in size.
2015-12-21opkg: update to latest, add host variant, enable gpg supportWaldemar Brodkorb
2015-12-14simplify qemu x86/x86_64 support, enable blockWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2015-12-13rework prereq checkWaldemar Brodkorb
The new prereq check is completely implemented in POSIX shell in scripts/prereq.sh. It combines the old features from Makefile, scan-tools.sh, scan-pkgs.sh, reloc.sh and some wrappers for tools. The big benefit is to have all portability stuff in one place. Furthermore we can compile GNU make and bash on the fly, for systems lacking the required tools. All changes on the host are detected on the fly, no make prereq required anymore. The build process is separated in following three phases: 1. small wrapper Makefile is used for BSD make or GNU make 2. prereq.sh is called, doing all checking, calling Makefile.adk 3. old logic in Makefile.adk or mk/build.mk is used Tested successfully on Linux, MacOS X, Cygwin, FreeBSD, OpenBSD and NetBSD. An old depmaker bug was fixed, only optional host tools are compiled. For example, even when a host provides xz, a local xz was compiled in the past, because other packages had a build dependency on it. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2015-12-11Revert "rework prereq check"Waldemar Brodkorb
This reverts commit fba2ff31928b18364c1934654169806f5c800e23.
2015-12-11rework prereq checkwbx
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2015-12-07sh: add support for numato mimas v2Waldemar Brodkorb
2015-11-07qemu-meta: add cmdline to allow input, suggested by James HoganWaldemar Brodkorb
2015-10-27bfin: prefer FDPICWaldemar Brodkorb
Use FDPIC by default. Limit gcc to a working one. Default to a working gdb version. Be sure to use uCLinux symbol only for BFLAT.
2015-10-23arc: add support for free nSIM simulator, thx to Alexey for hints to get it ↵Waldemar Brodkorb
running
2015-10-23add or1ksim basic filesWaldemar Brodkorb
2015-09-10prefix models with ADK_TARGET_MODELWaldemar Brodkorb
2015-09-02refactor kernel mini.config.Waldemar Brodkorb
We do not need to manually set mini.config file anymore. Every target system, even Qemu emulating different models get it its own. Cleaner and simpler to add new targets.
2015-08-03cleanupWaldemar Brodkorb
2015-07-27add some basic support for emcraft kinetisWaldemar Brodkorb
2015-06-22add example how to run simulatorWaldemar Brodkorb
2015-03-15remove ADDON featureWaldemar Brodkorb
2015-02-22rework CFLAGS and default gcc --with-cpu usageWaldemar Brodkorb
For better maintenance, rework hardware model specific CFLAGS. Work in progress, needs moe testing.
2015-02-22rework FPU/FLOAT supportWaldemar Brodkorb
NEON is only an extension not the FPU hardware. So handle this in a better way. Remove the lower case symbols.
2015-02-14do not select adkinstallWaldemar Brodkorb
2015-02-14fix glibc build of mips32 soft-float toolchainWaldemar Brodkorb
2015-02-09add basic support for raspberry pi2Waldemar Brodkorb
Introduce new board symbols for embedded systems, which use the similar board as basis. As for example raspberry pi and raspberry pi2. And some more updates: Update binutils to 2.25, set gcc 4.9.2 as default. Update glibc to 2.21, set as default. Update gdb to 7.8.2. Update kodi to latest release.
2015-02-08allow to select MIPSr2 ISA and Soft-Float for MIPS32Waldemar Brodkorb
2015-02-06rework CMDLINE generation regarding serial/vgaWaldemar Brodkorb
Use one place and not hard coded for each device. There exist use cases where on a specific device like raspberry pi, not the default 115200 baud rate is used.
2015-02-02update serial speed for rpi, update symbol name renaming of rpi-protoWaldemar Brodkorb
2015-01-27add basic support for opkg, update to latest stableWaldemar Brodkorb
2015-01-10add basic support for atmel ngw100. no runtime testing yetWaldemar Brodkorb
2015-01-05thumb fixes.Waldemar Brodkorb
2014-12-19use the new concept of appliancesWaldemar Brodkorb
- Sync with Kernel upstream Kconfig - use new feature visible - add a patch for select on choices https://lkml.org/lkml/2011/2/17/379 - rename ADK_LINUX -> ADK_TARGET_ARCH - remove package collection feature - add appliance feature to define a appliance more complete
2014-12-08use 9600 baud for rpi serialWaldemar Brodkorb
2014-10-22rework toolchain support for ARM.Waldemar Brodkorb
Use --with-cpu for gcc to have optimized code for requested ARM cpus. Add some basic support for cortex-m3.
2014-09-28Merge branch 'master' of git+ssh://openadk.org/git/openadkWaldemar Brodkorb
2014-09-28enable serial console on RpiWaldemar Brodkorb
2014-09-26add support for toolchain building for crisv32 architectureWaldemar Brodkorb
2014-08-26we need to remove crtbegin.o/crtend.o from gcc specs file. otherwise broken ↵Waldemar Brodkorb
executables (f.e. sash) with a wrong data start are created by elf2flt)
2014-08-23combine cubox-i and hummingboard support, same linux patches are requiredWaldemar Brodkorb
2014-08-15switch back to 5208. strange works now.Waldemar Brodkorb
2014-08-15use 5307 for now, which results in a working userland. need to investigate.Waldemar Brodkorb
2014-08-14add elf2flt, use it for m68k-nommu. bootup in qemu still fails.Waldemar Brodkorb
2014-08-11initramfs can be used on raspberry piWaldemar Brodkorb
2014-07-29fix initrdramfsarchive targetWaldemar Brodkorb
2014-07-28add some basic infrastructure for qemu-system-m68kWaldemar Brodkorb
Qemu emulates a Coldfire Evaluation board without MMU. As that is the first non-MMU platform in OpenADK I added ADK_TARGET_UCLINUX. Mksh can not be used for non-MMU, because it requires fork() for job control and other things. We use hush here. non-MMU support in uClibc does not have shared library support. Kernel does not start yet. So no runtime testing, but at least coldfire toolchain can be tested with uClibc-ng. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2014-07-23add support for qemu ppc bambooWaldemar Brodkorb
2014-07-23add qemu support for ppc virtex ml507Waldemar Brodkorb
2014-07-22initrd is supported for xtensa in qemu 2.1betaWaldemar Brodkorb
2014-07-11make nfsroot for apu hopefully workingWaldemar Brodkorb