summaryrefslogtreecommitdiff
path: root/target/arm/kernel
AgeCommit message (Collapse)Author
2016-07-17solidrun-imx6: allow to bootup 4.6.xWaldemar Brodkorb
2016-07-17qemu-arm: use dtb for versatile emulation, required for 4.6.xWaldemar Brodkorb
2016-07-10nslu2: fix boot (initramfs via tftp tested)Waldemar Brodkorb
2016-06-19linux: update to 3.14.72, add working solidrun patchWaldemar Brodkorb
2016-05-29unbreak rpi kernel support, HIGHMEM seems unusableWaldemar Brodkorb
2016-05-15add support for qemu xilinx zynq emulationWaldemar Brodkorb
2016-04-18fix kernel config for linksys nslu2Waldemar Brodkorb
2016-04-06add basic raspberry pi3 support (ARM 32Bit)Waldemar Brodkorb
2016-04-04new bcm28xx-bootloader does not work with mknlimg, fix 4.1.20 rpi2 bootupWaldemar Brodkorb
2016-03-19add basic bits and bytes for stm32f429 supportWaldemar Brodkorb
2016-03-07rework menu based config systemWaldemar Brodkorb
After the addition of bare metal toolchains the menu system allowed to create non-valid configurations. I reworked it so we can also add other operating system support if we wish. So first you choose your operating system, then your architecture and endianess, after that your embedded system, emulator or generic device and then you choose your task you want to run. Tasks may be toolchain, a new appliance/application or some preconfigured sets of packages and configurations as kodi, mpd, firefox and more. The tasks are limited to a plausible choice of hardware and software. Deduplicate CPU configuration. You don't wanna compile Kodi for a H8/300 microcontroller ;)
2016-02-10more stuff for kinetis k70, kernel still does not workWaldemar Brodkorb
2016-01-25add basic qemu armv6 supportWaldemar Brodkorb
2015-10-09downgrade packages to a state where kodi starts with 3.14.x kernelWaldemar Brodkorb
2015-10-06fix rpi1 bootupWaldemar Brodkorb
2015-09-12allow to use a defconfig, enable always experimental support in kernelWaldemar Brodkorb
2015-09-11enable required kernel symbols for rpiWaldemar Brodkorb
2015-09-01move serial support from mini.configWaldemar Brodkorb
2015-09-01add support for beaglebone blackWaldemar Brodkorb
2015-09-01rpi2: unbreak bootop with 4.1.x kernelWaldemar Brodkorb
Add missing kernel symbols. NOL2CACHE and *BSG to allow bootup. Remove support patches for older kernels. Enable REGMAP by default.
2015-08-27DMA legacy is REQUIRED! wtf. unbreak 4.x on rpi2Waldemar Brodkorb
2015-08-27allow to build ALSA, I2C, SPI as kernel modulesWaldemar Brodkorb
2015-08-27more kernel config cleanupsWaldemar Brodkorb
2015-08-27add ATAGSWaldemar Brodkorb
2015-08-03simplifyWaldemar Brodkorb
2015-07-30enable kuser_helper and MMC driver for banana piWaldemar Brodkorb
2015-07-30uImage is mandatory, add LOADADDRWaldemar Brodkorb
2015-07-27add some basic support for emcraft kinetisWaldemar Brodkorb
2015-07-26u-boot for BananaPro pls. check target/arm/kernel/banana-pro if ↵Martin Thomas
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_SUNXI=y make sense together Signed-off-by: Martin Thomas <mthomas@hamtam.de>
2015-05-23fix qemu arm emulation for vexpress-a9Waldemar Brodkorb
2015-05-16CONFIG_CMDLINE_FORCE is required to set consoleblank=0, kernel/init output ↵Waldemar Brodkorb
via serial console
2015-05-04extend bootloader cmdline for solidrun kernelWaldemar Brodkorb
2015-04-26add some basic banana pro supportWaldemar Brodkorb
2015-04-05kuser helpers required for uClibc-ngWaldemar Brodkorb
2015-04-05simplify config.txt generation, finetune kernel config for rpi2Waldemar Brodkorb
2015-04-05always enable device tree for raspberry pi{,2}. enable only 3.18 kernelWaldemar Brodkorb
2015-03-22remove Qemu stellaris support, not usabel for Linux, this was a mistake.Waldemar Brodkorb
2015-03-15add some useful bits and bytes for rpi2 supportWaldemar Brodkorb
2015-03-13remove Linus only symbol ARCH_BCM2835 for raspberryWaldemar Brodkorb
2015-03-11sync patches with rpi upstreamWaldemar Brodkorb
2015-02-19cleanup FPU support for ARM targets.Waldemar Brodkorb
2015-02-12nable another bcm2709 symbol for rpi2Waldemar Brodkorb
2015-02-09add basic support for raspberry pi2Waldemar Brodkorb
Introduce new board symbols for embedded systems, which use the similar board as basis. As for example raspberry pi and raspberry pi2. And some more updates: Update binutils to 2.25, set gcc 4.9.2 as default. Update glibc to 2.21, set as default. Update gdb to 7.8.2. Update kodi to latest release.
2015-02-02kernel config for qemu arm nommuWaldemar Brodkorb
2014-12-09update to rc3, kodi now works on cubox-iWaldemar Brodkorb
2014-12-05add basic support for linksys nslu2 (arm big endian platform)Waldemar Brodkorb
2014-10-11rework audio driver loading on rpiWaldemar Brodkorb
seems that i2s driver does not behave correctly when builtin. Add back driver modules for audio boards on rpi.
2014-10-04make sound support monolithicWaldemar Brodkorb
It is really hard to get it right, with the dependencies in this case. So if a user wants sound support, he will just get it included in the kernel. If not, just do not activate it.
2014-09-28enable serial console on RpiWaldemar Brodkorb
2014-08-23combine cubox-i and hummingboard support, same linux patches are requiredWaldemar Brodkorb
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 22:47:05 +0000