diff options
Diffstat (limited to 'target/waldux/config/Config.in.serial')
| -rw-r--r-- | target/waldux/config/Config.in.serial | 334 |
1 files changed, 0 insertions, 334 deletions
diff --git a/target/waldux/config/Config.in.serial b/target/waldux/config/Config.in.serial deleted file mode 100644 index 8534a19be..000000000 --- a/target/waldux/config/Config.in.serial +++ /dev/null @@ -1,334 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -menu "Serial devices support" -depends on ADK_TARGET_WITH_SERIAL || ADK_TARGET_QEMU || ADK_TARGET_VBOX || ADK_TARGET_SIM || ADK_TARGET_GENERIC - -config ADK_WALDUX_KERNEL_SERIAL_8250_DMA - bool - -config ADK_WALDUX_KERNEL_SERIAL_8250_DW - bool - -config ADK_WALDUX_KERNEL_SERIAL_8250_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_8250_PNP - bool - -config ADK_WALDUX_KERNEL_SERIAL_ARC_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_XILINX_PS_UART_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_IMX_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_OF_PLATFORM - bool - -config ADK_WALDUX_KERNEL_SERIAL_OMAP_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_UARTLITE_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_ETRAXFS_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_MCF_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_PMACZILOG_TTYS - bool - -config ADK_WALDUX_KERNEL_SERIAL_PMACZILOG_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_SH_SCI_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_AMBA_PL011_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_SUNCORE - bool - -config ADK_WALDUX_KERNEL_SERIAL_SUNSU_CONSOLE - bool - -config ADK_WALDUX_KERNEL_DA_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_IP22_ZILOG_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_BFIN_CONSOLE - bool - -config ADK_WALDUX_KERNEL_SERIAL_BFIN_UART0 - bool - -config ADK_WALDUX_KERNEL_SERIAL_BFIN_UART1 - bool - -config ADK_WALDUX_KERNEL_SERIAL_8250_INGENIC - bool - -config ADK_WALDUX_KERNEL_SERIAL_BFIN - bool "BFIN serial driver" - select ADK_WALDUX_KERNEL_SERIAL_BFIN_CONSOLE - select ADK_WALDUX_KERNEL_SERIAL_BFIN_UART0 - select ADK_WALDUX_KERNEL_SERIAL_BFIN_UART1 - depends on ADK_TARGET_ARCH_BFIN - default y if ADK_TARGET_ARCH_BFIN - -config ADK_WALDUX_KERNEL_SERIAL_8250 - bool "8250 serial driver" - select ADK_WALDUX_KERNEL_SERIAL_8250_CONSOLE - select ADK_WALDUX_KERNEL_SERIAL_OF_PLATFORM if ADK_TARGET_SYSTEM_XILINX_KINTEX7 \ - || ADK_TARGET_SYSTEM_IMGTEC_CI20 \ - || ADK_TARGET_SYSTEM_QEMU_CSKY_CK610 \ - || ADK_TARGET_SYSTEM_QEMU_CSKY_CK807 \ - || ADK_TARGET_SYSTEM_QEMU_CSKY_CK810 \ - || ADK_TARGET_SYSTEM_QEMU_XTENSA \ - || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_ML605 \ - || ADK_TARGET_SYSTEM_QEMU_NIOS2 \ - || ADK_TARGET_SYSTEM_QEMU_OR1K \ - || ADK_TARGET_SYSTEM_ANDES_AG101P \ - || ADK_TARGET_SYSTEM_ORANGE_PI0 \ - || ADK_TARGET_SYSTEM_SOM_C6745 - select ADK_WALDUX_KERNEL_SERIAL_8250_PNP if ADK_TARGET_SYSTEM_PCENGINES_APU - select ADK_WALDUX_KERNEL_SERIAL_8250_DW if ADK_TARGET_SYSTEM_SOLIDRUN_CLEARFOG - select ADK_WALDUX_KERNEL_SERIAL_8250_DW if ADK_TARGET_SYSTEM_ORANGE_PI0 - select ADK_WALDUX_KERNEL_SERIAL_8250_DMA if ADK_TARGET_SYSTEM_ORANGE_PI0 - select ADK_WALDUX_KERNEL_SERIAL_8250_INGENIC if ADK_TARGET_SYSTEM_IMGTEC_CI20 - depends on ADK_TARGET_SYSTEM_XILINX_KINTEX7 \ - || ADK_TARGET_SYSTEM_IMGTEC_CI20 \ - || ADK_TARGET_SYSTEM_LINKSYS_NSLU2 \ - || ADK_TARGET_SYSTEM_ANDES_AG101P \ - || ADK_TARGET_SYSTEM_PCENGINES_APU \ - || ADK_TARGET_SYSTEM_PCENGINES_ALIX \ - || ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_ML605 \ - || ADK_TARGET_SYSTEM_QEMU_MIPS \ - || ADK_TARGET_SYSTEM_QEMU_MIPS64 \ - || ADK_TARGET_SYSTEM_SGI_O2 \ - || ADK_TARGET_SYSTEM_QEMU_ALPHA \ - || ADK_TARGET_SYSTEM_QEMU_CSKY_CK610 \ - || ADK_TARGET_SYSTEM_QEMU_CSKY_CK807 \ - || ADK_TARGET_SYSTEM_QEMU_CSKY_CK810 \ - || ADK_TARGET_SYSTEM_QEMU_HPPA \ - || ADK_TARGET_SYSTEM_QEMU_NIOS2 \ - || ADK_TARGET_SYSTEM_QEMU_OR1K \ - || ADK_TARGET_SYSTEM_QEMU_PPC_BAMBOO \ - || ADK_TARGET_SYSTEM_QEMU_PPC_MPC8544DS \ - || ADK_TARGET_SYSTEM_QEMU_X86 \ - || ADK_TARGET_SYSTEM_QEMU_X86_64 \ - || ADK_TARGET_SYSTEM_QEMU_XTENSA \ - || ADK_TARGET_SYSTEM_IBM_X40 \ - || ADK_TARGET_SYSTEM_GENERIC_NDS32 \ - || ADK_TARGET_SYSTEM_GENERIC_X86 \ - || ADK_TARGET_SYSTEM_GENERIC_X86_64 \ - || ADK_TARGET_SYSTEM_MIKROTIK_RB532 \ - || ADK_TARGET_SYSTEM_MIKROTIK_RB4XX \ - || ADK_TARGET_SYSTEM_SOLIDRUN_CLEARFOG \ - || ADK_TARGET_SYSTEM_ORANGE_PI0 \ - || ADK_TARGET_SYSTEM_DEC_MULTIA \ - || ADK_TARGET_SYSTEM_SOM_C6745 - default y if ADK_TARGET_SYSTEM_XILINX_KINTEX7 - default y if ADK_TARGET_SYSTEM_IMGTEC_CI20 - default y if ADK_TARGET_SYSTEM_LINKSYS_NSLU2 - default y if ADK_TARGET_SYSTEM_ANDES_AG101P - default y if ADK_TARGET_SYSTEM_PCENGINES_APU - default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX - default y if ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_ML605 - default y if ADK_TARGET_SYSTEM_QEMU_MIPS - default y if ADK_TARGET_SYSTEM_QEMU_MIPS64 - default y if ADK_TARGET_SYSTEM_SGI_O2 - default y if ADK_TARGET_SYSTEM_QEMU_ALPHA - default y if ADK_TARGET_SYSTEM_QEMU_CSKY_CK610 - default y if ADK_TARGET_SYSTEM_QEMU_CSKY_CK807 - default y if ADK_TARGET_SYSTEM_QEMU_CSKY_CK810 - default y if ADK_TARGET_SYSTEM_QEMU_HPPA - default y if ADK_TARGET_SYSTEM_QEMU_NIOS2 - default y if ADK_TARGET_SYSTEM_QEMU_OR1K - default y if ADK_TARGET_SYSTEM_QEMU_PPC_BAMBOO - default y if ADK_TARGET_SYSTEM_QEMU_PPC_MPC8544DS - default y if ADK_TARGET_SYSTEM_QEMU_X86 - default y if ADK_TARGET_SYSTEM_QEMU_X86_64 - default y if ADK_TARGET_SYSTEM_QEMU_XTENSA - default y if ADK_TARGET_SYSTEM_IBM_X40 - default y if ADK_TARGET_SYSTEM_GENERIC_NDS32 - default y if ADK_TARGET_SYSTEM_GENERIC_X86 - default y if ADK_TARGET_SYSTEM_GENERIC_X86_64 - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB532 - default y if ADK_TARGET_SYSTEM_MIKROTIK_RB4XX - default y if ADK_TARGET_SYSTEM_SOLIDRUN_CLEARFOG - default y if ADK_TARGET_SYSTEM_ORANGE_PI0 - default y if ADK_TARGET_SYSTEM_SOM_C6745 - default y if ADK_TARGET_SYSTEM_DEC_MULTIA - default n - help - Serial driver for 8250 UART chip. - -config ADK_WALDUX_KERNEL_DA_TTY - bool "METAG serial driver" - select ADK_WALDUX_KERNEL_DA_CONSOLE - depends on ADK_TARGET_SYSTEM_QEMU_METAG - default y if ADK_TARGET_SYSTEM_QEMU_METAG - default n - help - Serial driver for Qemu METAG Emulation. - -config ADK_WALDUX_KERNEL_SERIAL_SUNSU - bool "Sun Sparc64 serial driver" - select ADK_WALDUX_KERNEL_SERIAL_SUNSU_CONSOLE - select ADK_WALDUX_KERNEL_SERIAL_SUNCORE - depends on ADK_TARGET_SYSTEM_QEMU_SPARC64 - default y if ADK_TARGET_SYSTEM_QEMU_SPARC64 - default n - help - Serial driver for Sun SPARC64. - -config ADK_WALDUX_KERNEL_SERIAL_ETRAXFS - bool "ETRAXFS serial driver" - select ADK_WALDUX_KERNEL_SERIAL_ETRAXFS_CONSOLE - depends on ADK_TARGET_SYSTEM_QEMU_CRIS - default y if ADK_TARGET_SYSTEM_QEMU_CRIS - default n - help - Serial driver for ETRAXFS CRISv32 Qemu Emulation. - -config ADK_WALDUX_KERNEL_SERIAL_ARC - bool "ARC serial driver" - select ADK_WALDUX_KERNEL_SERIAL_ARC_CONSOLE - depends on ADK_TARGET_SYSTEM_SYNOPSYS_NSIM - default y if ADK_TARGET_SYSTEM_SYNOPSYS_NSIM - default n - help - Serial driver for nSIM ARC simulator. - -config ADK_WALDUX_KERNEL_SERIAL_XILINX_PS_UART - bool "Cadence serial driver" - select ADK_WALDUX_KERNEL_SERIAL_XILINX_PS_UART_CONSOLE - depends on ADK_TARGET_SYSTEM_QEMU_ARM_XILINX_ZYNQ - default y if ADK_TARGET_SYSTEM_QEMU_ARM_XILINX_ZYNQ - default n - help - Serial driver for Xilinx Zynq. - -config ADK_WALDUX_KERNEL_SERIAL_IMX - bool "IMX serial driver" - select ADK_WALDUX_KERNEL_SERIAL_IMX_CONSOLE - depends on ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default y if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 - default n - help - Serial driver for IMX6 chip. - -config ADK_WALDUX_KERNEL_SERIAL_AMBA_PL011 - bool "AMBA PL011 serial driver" - select ADK_WALDUX_KERNEL_SERIAL_AMBA_PL011_CONSOLE - select ADK_WALDUX_KERNEL_SERIAL_OF_PLATFORM - select ADK_WALDUX_KERNEL_SERIAL_8250 - select ADK_WALDUX_KERNEL_SERIAL_8250_CONSOLE - depends on ADK_TARGET_BOARD_BCM28XX \ - || ADK_TARGET_SYSTEM_QEMU_ARM_REALVIEW_EB_MPCORE \ - || ADK_TARGET_SYSTEM_QEMU_ARM_VERSATILEPB \ - || ADK_TARGET_SYSTEM_QEMU_ARM_VEXPRESS_A9 - default y if ADK_TARGET_SYSTEM_RASPBERRY_PI - default y if ADK_TARGET_SYSTEM_RASPBERRY_PI2 - default y if ADK_TARGET_SYSTEM_QEMU_ARM_REALVIEW_EB_MPCORE - default y if ADK_TARGET_SYSTEM_QEMU_ARM_VERSATILEPB - default y if ADK_TARGET_SYSTEM_QEMU_ARM_VEXPRESS_A9 - default n - help - Serial driver for AMBA PL011 chip. - -config ADK_WALDUX_KERNEL_SERIAL_SH_SCI - bool "sci serial driver" - select ADK_WALDUX_KERNEL_SERIAL_SH_SCI_CONSOLE - depends on ADK_TARGET_SYSTEM_SIM_H8300H \ - || ADK_TARGET_SYSTEM_SIM_H8S \ - || ADK_TARGET_SYSTEM_HITACHI_EDOSK2674 - default y if ADK_TARGET_SYSTEM_SIM_H8300H - default y if ADK_TARGET_SYSTEM_SIM_H8S - default y if ADK_TARGET_SYSTEM_HITACHI_EDOSK2674 - default n - help - Serial driver for SCI chip. - -config ADK_WALDUX_KERNEL_SERIAL_MCF - bool "coldfire serial driver" - select ADK_WALDUX_KERNEL_SERIAL_MCF_CONSOLE - depends on ADK_TARGET_SYSTEM_QEMU_M68K_MCF5208 - default y if ADK_TARGET_SYSTEM_QEMU_M68K_MCF5208 - default n - help - Serial driver for Qemu coldfire. - -config ADK_WALDUX_KERNEL_SERIAL_PMACZILOG - bool "pmac serial driver" - select ADK_WALDUX_KERNEL_SERIAL_PMACZILOG_TTYS - select ADK_WALDUX_KERNEL_SERIAL_PMACZILOG_CONSOLE - depends on ADK_TARGET_SYSTEM_QEMU_M68K_Q800 \ - || ADK_TARGET_SYSTEM_QEMU_PPC_MACPPC - default y if ADK_TARGET_SYSTEM_QEMU_M68K_Q800 - default y if ADK_TARGET_SYSTEM_QEMU_PPC_MACPPC - default n - help - Serial driver for PMAC Q800 M68K and MACPPC. - -config ADK_WALDUX_KERNEL_SERIAL_OMAP - bool "omap serial driver" - select ADK_WALDUX_KERNEL_SERIAL_8250 - select ADK_WALDUX_KERNEL_SERIAL_8250_CONSOLE - select ADK_WALDUX_KERNEL_SERIAL_OMAP_CONSOLE - depends on ADK_TARGET_SYSTEM_BEAGLEBONE_BLACK \ - || ADK_TARGET_SYSTEM_PHYTEC_WEGA - default y if ADK_TARGET_SYSTEM_BEAGLEBONE_BLACK - default y if ADK_TARGET_SYSTEM_PHYTEC_WEGA - default n - help - Serial driver for TI OMAP Boards. - -config ADK_WALDUX_KERNEL_SERIAL_UARTLITE - bool "uartlite serial driver" - select ADK_WALDUX_KERNEL_SERIAL_UARTLITE_CONSOLE - depends on ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_S3ADSP1800 \ - || ADK_TARGET_SYSTEM_NUMATO_MIMASV2 - default y if ADK_TARGET_SYSTEM_QEMU_MICROBLAZE_S3ADSP1800 - default y if ADK_TARGET_SYSTEM_NUMATO_MIMASV2 - default n - help - Serial driver for UART lite hardware. - -config ADK_WALDUX_KERNEL_SERIAL_IP22_ZILOG - bool "SGI IP22 (Indy) serial driver" - select ADK_WALDUX_KERNEL_SERIAL_IP22_ZILOG_CONSOLE - depends on ADK_TARGET_SYSTEM_SGI_INDY - default y if ADK_TARGET_SYSTEM_SGI_INDY - default n - help - Serial driver for SGI Indy. - -config ADK_WALDUX_KERNEL_SERIAL_ATMEL - bool "AT32 serial driver" - select ADK_WALDUX_KERNEL_SERIAL_ATMEL_CONSOLE - select ADK_WALDUX_KERNEL_SERIAL_ATMEL_PDC - select ADK_WALDUX_KERNEL_BOARD_GRASSHOPPER_USART1 if ADK_TARGET_SYSTEM_GRASSHOPPER - depends on ADK_TARGET_CPU_AVR32 - default y if ADK_TARGET_SYSTEM_GRASSHOPPER - default n - help - Serial driver for AVR32 Grasshopper boards - -config ADK_WALDUX_KERNEL_BOARD_GRASSHOPPER_USART0 - bool "Enable USART0 on AVR32 Grasshopper boards" - depends on ADK_WALDUX_KERNEL_SERIAL_ATMEL && ADK_TARGET_SYSTEM_GRASSHOPPER - default n - help - Enable second USART on Grasshoper boards - -endmenu |