summaryrefslogtreecommitdiff
path: root/target/mips/dragino-ms14s/patches/3.14.45/0007-spi-add-rb4xx-cpld-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/mips/dragino-ms14s/patches/3.14.45/0007-spi-add-rb4xx-cpld-driver.patch')
-rw-r--r--target/mips/dragino-ms14s/patches/3.14.45/0007-spi-add-rb4xx-cpld-driver.patch548
1 files changed, 0 insertions, 548 deletions
diff --git a/target/mips/dragino-ms14s/patches/3.14.45/0007-spi-add-rb4xx-cpld-driver.patch b/target/mips/dragino-ms14s/patches/3.14.45/0007-spi-add-rb4xx-cpld-driver.patch
deleted file mode 100644
index 452f2e761..000000000
--- a/target/mips/dragino-ms14s/patches/3.14.45/0007-spi-add-rb4xx-cpld-driver.patch
+++ /dev/null
@@ -1,548 +0,0 @@
-From bb8d2a4ebf63bc2f04f15a28c92652700416ff83 Mon Sep 17 00:00:00 2001
-From: Phil Sutter <phil@nwl.cc>
-Date: Tue, 13 May 2014 00:20:04 +0200
-Subject: [PATCH] spi: add rb4xx cpld driver
-
----
- arch/mips/include/asm/mach-ath79/rb4xx_cpld.h | 48 +++
- drivers/spi/Kconfig | 7 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-rb4xx-cpld.c | 441 ++++++++++++++++++++++++++
- 4 files changed, 497 insertions(+)
- create mode 100644 arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
- create mode 100644 drivers/spi/spi-rb4xx-cpld.c
-
-diff --git a/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
-new file mode 100644
-index 0000000..5b17e94
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
-@@ -0,0 +1,48 @@
-+/*
-+ * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was based on the patches for Linux 2.6.27.39 published by
-+ * MikroTik for their RouterBoard 4xx series devices.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#define CPLD_GPIO_nLED1 0
-+#define CPLD_GPIO_nLED2 1
-+#define CPLD_GPIO_nLED3 2
-+#define CPLD_GPIO_nLED4 3
-+#define CPLD_GPIO_FAN 4
-+#define CPLD_GPIO_ALE 5
-+#define CPLD_GPIO_CLE 6
-+#define CPLD_GPIO_nCE 7
-+#define CPLD_GPIO_nLED5 8
-+
-+#define CPLD_NUM_GPIOS 9
-+
-+#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1)
-+#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2)
-+#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3)
-+#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4)
-+#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN)
-+#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE)
-+#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE)
-+#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE)
-+#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5)
-+
-+struct rb4xx_cpld_platform_data {
-+ unsigned gpio_base;
-+};
-+
-+extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
-+extern int rb4xx_cpld_read(unsigned char *rx_buf,
-+ const unsigned char *verify_buf,
-+ unsigned cnt);
-+extern int rb4xx_cpld_read_from(unsigned addr,
-+ unsigned char *rx_buf,
-+ const unsigned char *verify_buf,
-+ unsigned cnt);
-+extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 721f3a7..dbd7e98 100644
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -577,6 +577,13 @@ config SPI_TLE62X0
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
-+config SPI_RB4XX_CPLD
-+ tristate "MikroTik RB4XX CPLD driver"
-+ depends on ATH79_MACH_RB4XX
-+ help
-+ SPI driver for the Xilinx CPLD chip present on the
-+ MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
-diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
-index e738c7a..50913ae 100644
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -60,6 +60,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
-+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
-diff --git a/drivers/spi/spi-rb4xx-cpld.c b/drivers/spi/spi-rb4xx-cpld.c
-new file mode 100644
-index 0000000..a8d5282
---- /dev/null
-+++ b/drivers/spi/spi-rb4xx-cpld.c
-@@ -0,0 +1,441 @@
-+/*
-+ * SPI driver for the CPLD chip on the Mikrotik RB4xx boards
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was based on the patches for Linux 2.6.27.39 published by
-+ * MikroTik for their RouterBoard 4xx series devices.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/bitops.h>
-+#include <linux/spi/spi.h>
-+#include <linux/gpio.h>
-+#include <linux/slab.h>
-+
-+#include <asm/mach-ath79/rb4xx_cpld.h>
-+
-+#define DRV_NAME "spi-rb4xx-cpld"
-+#define DRV_DESC "RB4xx CPLD driver"
-+#define DRV_VERSION "0.1.0"
-+
-+#define CPLD_CMD_WRITE_NAND 0x08 /* send cmd, n x send data, send indle */
-+#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */
-+#define CPLD_CMD_READ_NAND 0x0a /* send cmd, send idle, n x read data */
-+#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */
-+#define CPLD_CMD_LED5_ON 0x0c /* send cmd */
-+#define CPLD_CMD_LED5_OFF 0x0d /* send cmd */
-+
-+struct rb4xx_cpld {
-+ struct spi_device *spi;
-+ struct mutex lock;
-+ struct gpio_chip chip;
-+ unsigned int config;
-+};
-+
-+static struct rb4xx_cpld *rb4xx_cpld;
-+
-+static inline struct rb4xx_cpld *gpio_to_cpld(struct gpio_chip *chip)
-+{
-+ return container_of(chip, struct rb4xx_cpld, chip);
-+}
-+
-+static int rb4xx_cpld_write_cmd(struct rb4xx_cpld *cpld, unsigned char cmd)
-+{
-+ struct spi_transfer t[1];
-+ struct spi_message m;
-+ unsigned char tx_buf[1];
-+ int err;
-+
-+ spi_message_init(&m);
-+ memset(&t, 0, sizeof(t));
-+
-+ t[0].tx_buf = tx_buf;
-+ t[0].len = sizeof(tx_buf);
-+ spi_message_add_tail(&t[0], &m);
-+
-+ tx_buf[0] = cmd;
-+
-+ err = spi_sync(cpld->spi, &m);
-+ return err;
-+}
-+
-+static int rb4xx_cpld_write_cfg(struct rb4xx_cpld *cpld, unsigned char config)
-+{
-+ struct spi_transfer t[1];
-+ struct spi_message m;
-+ unsigned char cmd[2];
-+ int err;
-+
-+ spi_message_init(&m);
-+ memset(&t, 0, sizeof(t));
-+
-+ t[0].tx_buf = cmd;
-+ t[0].len = sizeof(cmd);
-+ spi_message_add_tail(&t[0], &m);
-+
-+ cmd[0] = CPLD_CMD_WRITE_CFG;
-+ cmd[1] = config;
-+
-+ err = spi_sync(cpld->spi, &m);
-+ return err;
-+}
-+
-+static int __rb4xx_cpld_change_cfg(struct rb4xx_cpld *cpld, unsigned mask,
-+ unsigned value)
-+{
-+ unsigned int config;
-+ int err;
-+
-+ config = cpld->config & ~mask;
-+ config |= value;
-+
-+ if ((cpld->config ^ config) & 0xff) {
-+ err = rb4xx_cpld_write_cfg(cpld, config);
-+ if (err)
-+ return err;
-+ }
-+
-+ if ((cpld->config ^ config) & CPLD_CFG_nLED5) {
-+ err = rb4xx_cpld_write_cmd(cpld, (value) ? CPLD_CMD_LED5_ON :
-+ CPLD_CMD_LED5_OFF);
-+ if (err)
-+ return err;
-+ }
-+
-+ cpld->config = config;
-+ return 0;
-+}
-+
-+int rb4xx_cpld_change_cfg(unsigned mask, unsigned value)
-+{
-+ int ret;
-+
-+ if (rb4xx_cpld == NULL)
-+ return -ENODEV;
-+
-+ mutex_lock(&rb4xx_cpld->lock);
-+ ret = __rb4xx_cpld_change_cfg(rb4xx_cpld, mask, value);
-+ mutex_unlock(&rb4xx_cpld->lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(rb4xx_cpld_change_cfg);
-+
-+int rb4xx_cpld_read_from(unsigned addr, unsigned char *rx_buf,
-+ const unsigned char *verify_buf, unsigned count)
-+{
-+ const unsigned char cmd[5] = {
-+ CPLD_CMD_READ_FAST,
-+ (addr >> 16) & 0xff,
-+ (addr >> 8) & 0xff,
-+ addr & 0xff,
-+ 0
-+ };
-+ struct spi_transfer t[2] = {
-+ {
-+ .tx_buf = &cmd,
-+ .len = 5,
-+ },
-+ {
-+ .tx_buf = verify_buf,
-+ .rx_buf = rx_buf,
-+ .len = count,
-+ .verify = (verify_buf != NULL),
-+ },
-+ };
-+ struct spi_message m;
-+
-+ if (rb4xx_cpld == NULL)
-+ return -ENODEV;
-+
-+ spi_message_init(&m);
-+ m.fast_read = 1;
-+ spi_message_add_tail(&t[0], &m);
-+ spi_message_add_tail(&t[1], &m);
-+ return spi_sync(rb4xx_cpld->spi, &m);
-+}
-+EXPORT_SYMBOL_GPL(rb4xx_cpld_read_from);
-+
-+#if 0
-+int rb4xx_cpld_read(unsigned char *buf, unsigned char *verify_buf,
-+ unsigned count)
-+{
-+ struct spi_transfer t[2];
-+ struct spi_message m;
-+ unsigned char cmd[2];
-+
-+ if (rb4xx_cpld == NULL)
-+ return -ENODEV;
-+
-+ spi_message_init(&m);
-+ memset(&t, 0, sizeof(t));
-+
-+ /* send command */
-+ t[0].tx_buf = cmd;
-+ t[0].len = sizeof(cmd);
-+ spi_message_add_tail(&t[0], &m);
-+
-+ cmd[0] = CPLD_CMD_READ_NAND;
-+ cmd[1] = 0;
-+
-+ /* read data */
-+ t[1].rx_buf = buf;
-+ t[1].len = count;
-+ spi_message_add_tail(&t[1], &m);
-+
-+ return spi_sync(rb4xx_cpld->spi, &m);
-+}
-+#else
-+int rb4xx_cpld_read(unsigned char *rx_buf, const unsigned char *verify_buf,
-+ unsigned count)
-+{
-+ static const unsigned char cmd[2] = { CPLD_CMD_READ_NAND, 0 };
-+ struct spi_transfer t[2] = {
-+ {
-+ .tx_buf = &cmd,
-+ .len = 2,
-+ }, {
-+ .tx_buf = verify_buf,
-+ .rx_buf = rx_buf,
-+ .len = count,
-+ .verify = (verify_buf != NULL),
-+ },
-+ };
-+ struct spi_message m;
-+
-+ if (rb4xx_cpld == NULL)
-+ return -ENODEV;
-+
-+ spi_message_init(&m);
-+ spi_message_add_tail(&t[0], &m);
-+ spi_message_add_tail(&t[1], &m);
-+ return spi_sync(rb4xx_cpld->spi, &m);
-+}
-+#endif
-+EXPORT_SYMBOL_GPL(rb4xx_cpld_read);
-+
-+int rb4xx_cpld_write(const unsigned char *buf, unsigned count)
-+{
-+#if 0
-+ struct spi_transfer t[3];
-+ struct spi_message m;
-+ unsigned char cmd[1];
-+
-+ if (rb4xx_cpld == NULL)
-+ return -ENODEV;
-+
-+ memset(&t, 0, sizeof(t));
-+ spi_message_init(&m);
-+
-+ /* send command */
-+ t[0].tx_buf = cmd;
-+ t[0].len = sizeof(cmd);
-+ spi_message_add_tail(&t[0], &m);
-+
-+ cmd[0] = CPLD_CMD_WRITE_NAND;
-+
-+ /* write data */
-+ t[1].tx_buf = buf;
-+ t[1].len = count;
-+ spi_message_add_tail(&t[1], &m);
-+
-+ /* send idle */
-+ t[2].len = 1;
-+ spi_message_add_tail(&t[2], &m);
-+
-+ return spi_sync(rb4xx_cpld->spi, &m);
-+#else
-+ static const unsigned char cmd = CPLD_CMD_WRITE_NAND;
-+ struct spi_transfer t[3] = {
-+ {
-+ .tx_buf = &cmd,
-+ .len = 1,
-+ }, {
-+ .tx_buf = buf,
-+ .len = count,
-+ .fast_write = 1,
-+ }, {
-+ .len = 1,
-+ .fast_write = 1,
-+ },
-+ };
-+ struct spi_message m;
-+
-+ if (rb4xx_cpld == NULL)
-+ return -ENODEV;
-+
-+ spi_message_init(&m);
-+ spi_message_add_tail(&t[0], &m);
-+ spi_message_add_tail(&t[1], &m);
-+ spi_message_add_tail(&t[2], &m);
-+ return spi_sync(rb4xx_cpld->spi, &m);
-+#endif
-+}
-+EXPORT_SYMBOL_GPL(rb4xx_cpld_write);
-+
-+static int rb4xx_cpld_gpio_get(struct gpio_chip *chip, unsigned offset)
-+{
-+ struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
-+ int ret;
-+
-+ mutex_lock(&cpld->lock);
-+ ret = (cpld->config >> offset) & 1;
-+ mutex_unlock(&cpld->lock);
-+
-+ return ret;
-+}
-+
-+static void rb4xx_cpld_gpio_set(struct gpio_chip *chip, unsigned offset,
-+ int value)
-+{
-+ struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
-+
-+ mutex_lock(&cpld->lock);
-+ __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
-+ mutex_unlock(&cpld->lock);
-+}
-+
-+static int rb4xx_cpld_gpio_direction_input(struct gpio_chip *chip,
-+ unsigned offset)
-+{
-+ return -EOPNOTSUPP;
-+}
-+
-+static int rb4xx_cpld_gpio_direction_output(struct gpio_chip *chip,
-+ unsigned offset,
-+ int value)
-+{
-+ struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
-+ int ret;
-+
-+ mutex_lock(&cpld->lock);
-+ ret = __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
-+ mutex_unlock(&cpld->lock);
-+
-+ return ret;
-+}
-+
-+static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base)
-+{
-+ int err;
-+
-+ /* init config */
-+ cpld->config = CPLD_CFG_nLED1 | CPLD_CFG_nLED2 | CPLD_CFG_nLED3 |
-+ CPLD_CFG_nLED4 | CPLD_CFG_nCE;
-+ rb4xx_cpld_write_cfg(cpld, cpld->config);
-+
-+ /* setup GPIO chip */
-+ cpld->chip.label = DRV_NAME;
-+
-+ cpld->chip.get = rb4xx_cpld_gpio_get;
-+ cpld->chip.set = rb4xx_cpld_gpio_set;
-+ cpld->chip.direction_input = rb4xx_cpld_gpio_direction_input;
-+ cpld->chip.direction_output = rb4xx_cpld_gpio_direction_output;
-+
-+ cpld->chip.base = base;
-+ cpld->chip.ngpio = CPLD_NUM_GPIOS;
-+ cpld->chip.can_sleep = 1;
-+ cpld->chip.dev = &cpld->spi->dev;
-+ cpld->chip.owner = THIS_MODULE;
-+
-+ err = gpiochip_add(&cpld->chip);
-+ if (err)
-+ dev_err(&cpld->spi->dev, "adding GPIO chip failed, err=%d\n",
-+ err);
-+
-+ return err;
-+}
-+
-+static int rb4xx_cpld_probe(struct spi_device *spi)
-+{
-+ struct rb4xx_cpld *cpld;
-+ struct rb4xx_cpld_platform_data *pdata;
-+ int err;
-+
-+ pdata = spi->dev.platform_data;
-+ if (!pdata) {
-+ dev_dbg(&spi->dev, "no platform data\n");
-+ return -EINVAL;
-+ }
-+
-+ cpld = kzalloc(sizeof(*cpld), GFP_KERNEL);
-+ if (!cpld) {
-+ dev_err(&spi->dev, "no memory for private data\n");
-+ return -ENOMEM;
-+ }
-+
-+ mutex_init(&cpld->lock);
-+ cpld->spi = spi_dev_get(spi);
-+ dev_set_drvdata(&spi->dev, cpld);
-+
-+ spi->mode = SPI_MODE_0;
-+ spi->bits_per_word = 8;
-+ err = spi_setup(spi);
-+ if (err) {
-+ dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
-+ goto err_drvdata;
-+ }
-+
-+ err = rb4xx_cpld_gpio_init(cpld, pdata->gpio_base);
-+ if (err)
-+ goto err_drvdata;
-+
-+ rb4xx_cpld = cpld;
-+
-+ return 0;
-+
-+err_drvdata:
-+ dev_set_drvdata(&spi->dev, NULL);
-+ kfree(cpld);
-+
-+ return err;
-+}
-+
-+static int rb4xx_cpld_remove(struct spi_device *spi)
-+{
-+ struct rb4xx_cpld *cpld;
-+
-+ rb4xx_cpld = NULL;
-+ cpld = dev_get_drvdata(&spi->dev);
-+ dev_set_drvdata(&spi->dev, NULL);
-+ kfree(cpld);
-+
-+ return 0;
-+}
-+
-+static struct spi_driver rb4xx_cpld_driver = {
-+ .driver = {
-+ .name = DRV_NAME,
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = rb4xx_cpld_probe,
-+ .remove = rb4xx_cpld_remove,
-+};
-+
-+static int __init rb4xx_cpld_init(void)
-+{
-+ return spi_register_driver(&rb4xx_cpld_driver);
-+}
-+module_init(rb4xx_cpld_init);
-+
-+static void __exit rb4xx_cpld_exit(void)
-+{
-+ spi_unregister_driver(&rb4xx_cpld_driver);
-+}
-+module_exit(rb4xx_cpld_exit);
-+
-+MODULE_DESCRIPTION(DRV_DESC);
-+MODULE_VERSION(DRV_VERSION);
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_LICENSE("GPL v2");
---
-1.8.5.3
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 10:45:24 +0000