summaryrefslogtreecommitdiff
path: root/target/linux/patches
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/patches')
-rw-r--r--target/linux/patches/4.0.3/cris32-serial.patch2886
1 files changed, 2886 insertions, 0 deletions
diff --git a/target/linux/patches/4.0.3/cris32-serial.patch b/target/linux/patches/4.0.3/cris32-serial.patch
new file mode 100644
index 000000000..0f071cffb
--- /dev/null
+++ b/target/linux/patches/4.0.3/cris32-serial.patch
@@ -0,0 +1,2886 @@
+diff -Nur linux-4.0.3.orig/arch/cris/arch-v32/drivers/Kconfig linux-4.0.3/arch/cris/arch-v32/drivers/Kconfig
+--- linux-4.0.3.orig/arch/cris/arch-v32/drivers/Kconfig 2015-05-13 14:14:53.000000000 +0200
++++ linux-4.0.3/arch/cris/arch-v32/drivers/Kconfig 2015-05-25 17:20:55.000000000 +0200
+@@ -49,24 +49,261 @@
+ if you do not need DMA to something else.
+ ser0 can use dma4 or dma6 for output and dma5 or dma7 for input.
+
++choice
++ prompt "Ser0 default port type "
++ depends on ETRAX_SERIAL_PORT0
++ default ETRAX_SERIAL_PORT0_TYPE_232
++ help
++ Type of serial port.
++
++config ETRAX_SERIAL_PORT0_TYPE_232
++ bool "Ser0 is a RS-232 port"
++ help
++ Configure serial port 0 to be a RS-232 port.
++
++config ETRAX_SERIAL_PORT0_TYPE_485HD
++ bool "Ser0 is a half duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 0 to be a half duplex (two wires) RS-485 port.
++
++config ETRAX_SERIAL_PORT0_TYPE_485FD
++ bool "Ser0 is a full duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 0 to be a full duplex (four wires) RS-485 port.
++endchoice
++
++config ETRAX_SER0_DTR_BIT
++ string "Ser 0 DTR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT0
++
++config ETRAX_SER0_RI_BIT
++ string "Ser 0 RI bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT0
++
++config ETRAX_SER0_DSR_BIT
++ string "Ser 0 DSR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT0
++
++config ETRAX_SER0_CD_BIT
++ string "Ser 0 CD bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT0
++
+ config ETRAX_SERIAL_PORT1
+ bool "Serial port 1 enabled"
+ depends on ETRAXFS_SERIAL
+ help
+ Enables the ETRAX FS serial driver for ser1 (ttyS1).
+
++choice
++ prompt "Ser1 default port type"
++ depends on ETRAX_SERIAL_PORT1
++ default ETRAX_SERIAL_PORT1_TYPE_232
++ help
++ Type of serial port.
++
++config ETRAX_SERIAL_PORT1_TYPE_232
++ bool "Ser1 is a RS-232 port"
++ help
++ Configure serial port 1 to be a RS-232 port.
++
++config ETRAX_SERIAL_PORT1_TYPE_485HD
++ bool "Ser1 is a half duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 1 to be a half duplex (two wires) RS-485 port.
++
++config ETRAX_SERIAL_PORT1_TYPE_485FD
++ bool "Ser1 is a full duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 1 to be a full duplex (four wires) RS-485 port.
++endchoice
++
++config ETRAX_SER1_DTR_BIT
++ string "Ser 1 DTR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT1
++
++config ETRAX_SER1_RI_BIT
++ string "Ser 1 RI bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT1
++
++config ETRAX_SER1_DSR_BIT
++ string "Ser 1 DSR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT1
++
++config ETRAX_SER1_CD_BIT
++ string "Ser 1 CD bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT1
++
+ config ETRAX_SERIAL_PORT2
+ bool "Serial port 2 enabled"
+ depends on ETRAXFS_SERIAL
+ help
+ Enables the ETRAX FS serial driver for ser2 (ttyS2).
+
++choice
++ prompt "Ser2 default port type"
++ depends on ETRAX_SERIAL_PORT2
++ default ETRAX_SERIAL_PORT2_TYPE_232
++ help
++ What DMA channel to use for ser2
++
++config ETRAX_SERIAL_PORT2_TYPE_232
++ bool "Ser2 is a RS-232 port"
++ help
++ Configure serial port 2 to be a RS-232 port.
++
++config ETRAX_SERIAL_PORT2_TYPE_485HD
++ bool "Ser2 is a half duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 2 to be a half duplex (two wires) RS-485 port.
++
++config ETRAX_SERIAL_PORT2_TYPE_485FD
++ bool "Ser2 is a full duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 2 to be a full duplex (four wires) RS-485 port.
++endchoice
++
++
++config ETRAX_SER2_DTR_BIT
++ string "Ser 2 DTR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT2
++
++config ETRAX_SER2_RI_BIT
++ string "Ser 2 RI bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT2
++
++config ETRAX_SER2_DSR_BIT
++ string "Ser 2 DSR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT2
++
++config ETRAX_SER2_CD_BIT
++ string "Ser 2 CD bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT2
++
+ config ETRAX_SERIAL_PORT3
+ bool "Serial port 3 enabled"
+ depends on ETRAXFS_SERIAL
+ help
+ Enables the ETRAX FS serial driver for ser3 (ttyS3).
+
++choice
++ prompt "Ser3 default port type"
++ depends on ETRAX_SERIAL_PORT3
++ default ETRAX_SERIAL_PORT3_TYPE_232
++ help
++ What DMA channel to use for ser3.
++
++config ETRAX_SERIAL_PORT3_TYPE_232
++ bool "Ser3 is a RS-232 port"
++ help
++ Configure serial port 3 to be a RS-232 port.
++
++config ETRAX_SERIAL_PORT3_TYPE_485HD
++ bool "Ser3 is a half duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 3 to be a half duplex (two wires) RS-485 port.
++
++config ETRAX_SERIAL_PORT3_TYPE_485FD
++ bool "Ser3 is a full duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 3 to be a full duplex (four wires) RS-485 port.
++endchoice
++
++config ETRAX_SER3_DTR_BIT
++ string "Ser 3 DTR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT3
++
++config ETRAX_SER3_RI_BIT
++ string "Ser 3 RI bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT3
++
++config ETRAX_SER3_DSR_BIT
++ string "Ser 3 DSR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT3
++
++config ETRAX_SER3_CD_BIT
++ string "Ser 3 CD bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT3
++
++config ETRAX_SERIAL_PORT4
++ bool "Serial port 4 enabled"
++ depends on ETRAXFS_SERIAL && CRIS_MACH_ARTPEC3
++ help
++ Enables the ETRAX FS serial driver for ser4 (ttyS4).
++
++choice
++ prompt "Ser4 default port type"
++ depends on ETRAX_SERIAL_PORT4
++ default ETRAX_SERIAL_PORT4_TYPE_232
++ help
++ What DMA channel to use for ser4.
++
++config ETRAX_SERIAL_PORT4_TYPE_232
++ bool "Ser4 is a RS-232 port"
++ help
++ Configure serial port 4 to be a RS-232 port.
++
++config ETRAX_SERIAL_PORT4_TYPE_485HD
++ bool "Ser4 is a half duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 4 to be a half duplex (two wires) RS-485 port.
++
++config ETRAX_SERIAL_PORT4_TYPE_485FD
++ bool "Ser4 is a full duplex RS-485 port"
++ depends on ETRAX_RS485
++ help
++ Configure serial port 4 to be a full duplex (four wires) RS-485 port.
++endchoice
++
++choice
++ prompt "Ser4 DMA in channel "
++ depends on ETRAX_SERIAL_PORT4
++ default ETRAX_SERIAL_PORT4_NO_DMA_IN
++ help
++ What DMA channel to use for ser4.
++
++
++config ETRAX_SERIAL_PORT4_NO_DMA_IN
++ bool "Ser4 uses no DMA for input"
++ help
++ Do not use DMA for ser4 input.
++
++config ETRAX_SERIAL_PORT4_DMA9_IN
++ bool "Ser4 uses DMA9 for input"
++ depends on ETRAX_SERIAL_PORT4
++ help
++ Enables the DMA9 input channel for ser4 (ttyS4).
++ If you do not enable DMA, an interrupt for each character will be
++ used when receiving data.
++ Normally you want to use DMA, unless you use the DMA channel for
++ something else.
++
++endchoice
++
++config ETRAX_SER4_DTR_BIT
++ string "Ser 4 DTR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT4
++
++config ETRAX_SER4_RI_BIT
++ string "Ser 4 RI bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT4
++
++config ETRAX_SER4_DSR_BIT
++ string "Ser 4 DSR bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT4
++
++config ETRAX_SER4_CD_BIT
++ string "Ser 4 CD bit (empty = not used)"
++ depends on ETRAX_SERIAL_PORT4
++
+ config ETRAX_SYNCHRONOUS_SERIAL
+ bool "Synchronous serial-port support"
+ depends on ETRAX_ARCH_V32
+diff -Nur linux-4.0.3.orig/arch/cris/include/uapi/asm/ioctls.h linux-4.0.3/arch/cris/include/uapi/asm/ioctls.h
+--- linux-4.0.3.orig/arch/cris/include/uapi/asm/ioctls.h 2015-05-13 14:14:53.000000000 +0200
++++ linux-4.0.3/arch/cris/include/uapi/asm/ioctls.h 2015-05-25 17:20:56.000000000 +0200
+@@ -5,6 +5,10 @@
+ #define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
+ #define TIOCSERWRRS485 0x5462 /* write rs-485 */
+ #define TIOCSRS485 0x5463 /* enable rs-485 */
++#define TIOCSERSETRS485FD 0x5464 /* set rs-485 full/half duplex mode */
++
++
++#define TIOCSERSETDIVISOR 0x5465 /* set the divisor for non standard bauds */
+
+ #include <asm-generic/ioctls.h>
+
+diff -Nur linux-4.0.3.orig/drivers/tty/serial/crisv32.c linux-4.0.3/drivers/tty/serial/crisv32.c
+--- linux-4.0.3.orig/drivers/tty/serial/crisv32.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-4.0.3/drivers/tty/serial/crisv32.c 2015-05-25 17:20:56.000000000 +0200
+@@ -0,0 +1,2581 @@
++/* $Id: crisv32.c,v 1.109 2010-07-09 15:00:44 jespern Exp $
++ *
++ * Serial port driver for the ETRAX FS chip
++ *
++ * Copyright (C) 1998-2006 Axis Communications AB
++ *
++ * Many, many authors. Based once upon a time on serial.c for 16x50.
++ *
++ * Johan Adolfsson - port to ETRAX FS
++ * Mikael Starvik - port to serial_core framework
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/console.h>
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/serial_core.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/tty_flip.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/uaccess.h>
++
++#include <dma.h>
++#include <arch/system.h>
++#include <mach/pinmux.h>
++#include <hwregs/dma.h>
++#include <hwregs/reg_rdwr.h>
++#include <hwregs/ser_defs.h>
++#include <hwregs/dma_defs.h>
++#include <hwregs/gio_defs.h>
++#include <hwregs/intr_vect_defs.h>
++#include <hwregs/reg_map.h>
++
++#define UART_NR CONFIG_ETRAX_SERIAL_PORTS + 1 /* Ports + dummy port */
++#define SERIAL_RECV_DESCRIPTORS 8
++
++/* We only buffer 255 characters here, no need for more tx descriptors. */
++#define SERIAL_TX_DESCRIPTORS 4
++
++/* Kept for experimental purposes. */
++#define SERIAL_DESCR_BUF_SIZE 256
++#define regi_NULL 0
++#define DMA_WAIT_UNTIL_RESET(inst) \
++ do { \
++ reg_dma_rw_stat r; \
++ do { \
++ r = REG_RD(dma, (inst), rw_stat); \
++ } while (r.mode != regk_dma_rst); \
++ } while (0)
++
++#define __DMA(ch) regi_dma##ch
++#define DMA(ch) __DMA(ch)
++#define DMA_IRQ(ch) (DMA0_INTR_VECT + (ch))
++
++/* Macro to set up control lines for a port. */
++#define SETUP_PINS(port) \
++ if (serial_cris_ports[port].used) { \
++ if (strcmp(CONFIG_ETRAX_SER##port##_DTR_BIT, "")) \
++ crisv32_io_get_name(&serial_cris_ports[port].dtr_pin, \
++ CONFIG_ETRAX_SER##port##_DTR_BIT); \
++ else \
++ serial_cris_ports[port].dtr_pin = dummy_pin; \
++ if (strcmp(CONFIG_ETRAX_SER##port##_DSR_BIT, "")) \
++ crisv32_io_get_name(&serial_cris_ports[port].dsr_pin, \
++ CONFIG_ETRAX_SER##port##_DSR_BIT); \
++ else \
++ serial_cris_ports[port].dsr_pin = dummy_pin; \
++ if (strcmp(CONFIG_ETRAX_SER##port##_RI_BIT, "")) \
++ crisv32_io_get_name(&serial_cris_ports[port].ri_pin, \
++ CONFIG_ETRAX_SER##port##_RI_BIT); \
++ else \
++ serial_cris_ports[port].ri_pin = dummy_pin; \
++ if (strcmp(CONFIG_ETRAX_SER##port##_CD_BIT, "")) \
++ crisv32_io_get_name(&serial_cris_ports[port].cd_pin, \
++ CONFIG_ETRAX_SER##port##_CD_BIT); \
++ else \
++ serial_cris_ports[port].cd_pin = dummy_pin; \
++ }
++
++/* Set a serial port register if anything has changed. */
++#define MODIFY_REG(instance, reg, var) \
++ if (REG_RD_INT(ser, instance, reg) \
++ != REG_TYPE_CONV(int, reg_ser_##reg, var)) \
++ REG_WR(ser, instance, reg, var);
++
++/*
++ * Regarding RS485 operation in crisv32 serial driver.
++ * ---------------------------------------------------
++ * RS485 can be run in two modes, full duplex using four wires (485FD) and
++ * half duplex using two wires (485HD). The default mode of each serial port
++ * is configured in the kernel configuration. The available modes are:
++ * RS-232, RS-485 half duplex, and RS-485 full duplex.
++ *
++ * In the 485HD mode the direction of the data bus must be able to switch.
++ * The direction of the transceiver is controlled by the RTS signal. Hence
++ * the auto_rts function in the ETRAX FS chip is enabled in this mode, which
++ * automatically toggle RTS when transmitting. The initial direction of the
++ * port is receiving.
++ *
++ * In the 485FD mode two transceivers will be used, one in each direction.
++ * Usually the hardware can handle both 485HD and 485FD, which implies that
++ * one of the transceivers can change direction. Consequently that transceiver
++ * must be tied to operate in the opposite direction of the other one, setting
++ * and keeping RTS to a fixed value do this.
++ *
++ * There are two special "ioctl" that can configure the ports. These two are
++ * left for backward compatible with older applications. The effects of using
++ * them are described below:
++ * The TIOCSERSETRS485:
++ * This ioctl sets a serial port in 232 mode to 485HD mode or vise versa. The
++ * state of the port is kept when closing the port. Note that this ioctl has no
++ * effect on a serial port in the 485FD mode.
++ * The TIOCSERWRRS485:
++ * This ioctl set a serial port in 232 mode to 485HD mode and writes the data
++ * "included" in the ioctl to the port. The port will then stay in 485HD mode.
++ * Using this ioctl on a serial port in the 485HD mode will transmit the data
++ * without changing the mode. Using this ioctl on a serial port in 485FD mode
++ * will not change the mode and simply send the data using the 485FD mode.
++ */
++
++#define TYPE_232 0
++#define TYPE_485HD 1
++#define TYPE_485FD 2
++
++struct etrax_recv_buffer {
++ struct etrax_recv_buffer *next;
++ unsigned short length;
++ unsigned char error;
++ unsigned char pad;
++
++ unsigned char buffer[0];
++};
++
++struct uart_cris_port {
++ struct uart_port port;
++
++ int initialized;
++ int used;
++ int irq;
++
++ /* Used to check if port enabled as well by testing for zero. */
++ reg_scope_instances regi_ser;
++ reg_scope_instances regi_dmain;
++ reg_scope_instances regi_dmaout;
++
++ struct crisv32_iopin dtr_pin;
++ struct crisv32_iopin dsr_pin;
++ struct crisv32_iopin ri_pin;
++ struct crisv32_iopin cd_pin;
++
++ struct dma_descr_context tr_context_descr
++ __attribute__ ((__aligned__(32)));
++ struct dma_descr_data tr_descr[SERIAL_TX_DESCRIPTORS]
++ __attribute__ ((__aligned__(32)));
++ struct dma_descr_context rec_context_descr
++ __attribute__ ((__aligned__(32)));
++ struct dma_descr_data rec_descr[SERIAL_RECV_DESCRIPTORS]
++ __attribute__ ((__aligned__(32)));
++
++ /* This is the first one in the list the HW is working on now. */
++ struct dma_descr_data* first_tx_descr;
++
++ /* This is the last one in the list the HW is working on now. */
++ struct dma_descr_data* last_tx_descr;
++
++ /* This is how many characters the HW is working on now. */
++ unsigned int tx_pending_chars;
++
++ int tx_started;
++ unsigned int cur_rec_descr;
++ struct etrax_recv_buffer *first_recv_buffer;
++ struct etrax_recv_buffer *last_recv_buffer;
++
++ unsigned int recv_cnt;
++ unsigned int max_recv_cnt;
++
++ /* The time for 1 char, in usecs. */
++ unsigned long char_time_usec;
++
++ /* Last tx usec in the jiffies. */
++ unsigned long last_tx_active_usec;
++
++ /* Last tx time in jiffies. */
++ unsigned long last_tx_active;
++
++ /* Last rx usec in the jiffies. */
++ unsigned long last_rx_active_usec;
++
++ /* Last rx time in jiffies. */
++ unsigned long last_rx_active;
++
++#ifdef CONFIG_ETRAX_RS485
++ /* RS-485 support, duh. */
++ struct rs485_control rs485;
++#endif
++ int port_type;
++ int write_ongoing;
++};
++
++extern struct uart_driver serial_cris_driver;
++static struct uart_port *console_port;
++static int console_baud = 115200;
++static struct uart_cris_port serial_cris_ports[UART_NR] = {
++{
++#ifdef CONFIG_ETRAX_SERIAL_PORT0
++ .used = 1,
++ .irq = SER0_INTR_VECT,
++ .regi_ser = regi_ser0,
++ /*
++ * We initialize the dma stuff like this to get a compiler error
++ * if a CONFIG is missing
++ */
++ .regi_dmain =
++# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
++ regi_dma7,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT0_DMA1_IN)
++ regi_dma1,
++# elif defined CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN
++ regi_NULL,
++# endif
++
++ .regi_dmaout =
++# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
++ regi_dma6,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT0_DMA7_OUT)
++ regi_dma7,
++# else
++ regi_NULL,
++# endif
++
++# ifdef CONFIG_ETRAX_RS485
++# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485HD
++ .port_type = TYPE_485HD,
++# endif
++# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485FD
++ .port_type = TYPE_485FD,
++# endif
++# endif
++#else
++ .regi_ser = regi_NULL,
++ .regi_dmain = regi_NULL,
++ .regi_dmaout = regi_NULL,
++#endif
++ .write_ongoing = 0
++}, /* ttyS0 */
++{
++#ifdef CONFIG_ETRAX_SERIAL_PORT1
++ .used = 1,
++ .irq = SER1_INTR_VECT,
++ .regi_ser = regi_ser1,
++ .regi_dmain =
++# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN
++ regi_dma5,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN)
++ regi_NULL,
++# endif
++
++ .regi_dmaout =
++# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT
++ regi_dma4,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT)
++ regi_NULL,
++# endif
++
++# ifdef CONFIG_ETRAX_RS485
++# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485HD
++ .port_type = TYPE_485HD,
++# endif
++# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485FD
++ .port_type = TYPE_485FD,
++# endif
++# endif
++#else
++ .regi_ser = regi_NULL,
++ .regi_dmain = regi_NULL,
++ .regi_dmaout = regi_NULL,
++#endif
++ .write_ongoing = 0
++}, /* ttyS1 */
++{
++#ifdef CONFIG_ETRAX_SERIAL_PORT2
++ .used = 1,
++ .irq = SER2_INTR_VECT,
++ .regi_ser = regi_ser2,
++ .regi_dmain =
++# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
++ regi_dma3,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT2_DMA7_IN)
++ regi_dma7,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN)
++ regi_NULL,
++# endif
++
++ .regi_dmaout =
++# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
++ regi_dma2,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT2_DMA6_OUT)
++ regi_dma6,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT)
++ regi_NULL,
++# endif
++
++# ifdef CONFIG_ETRAX_RS485
++# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485HD
++ .port_type = TYPE_485HD,
++# endif
++# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485FD
++ .port_type = TYPE_485FD,
++# endif
++# endif
++#else
++ .regi_ser = regi_NULL,
++ .regi_dmain = regi_NULL,
++ .regi_dmaout = regi_NULL,
++#endif
++ .write_ongoing = 0
++}, /* ttyS2 */
++{
++#ifdef CONFIG_ETRAX_SERIAL_PORT3
++ .used = 1,
++ .irq = SER3_INTR_VECT,
++ .regi_ser = regi_ser3,
++ .regi_dmain =
++# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN
++ regi_dma9,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT3_DMA4_IN)
++ regi_dma3,
++# else
++ regi_NULL,
++# endif
++
++ .regi_dmaout =
++# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT
++ regi_dma8,
++# elif defined(CONFIG_ETRAX_SERIAL_PORT3_DMA2_OUT)
++ regi_dma2,
++# else
++ regi_NULL,
++# endif
++# ifdef CONFIG_ETRAX_RS485
++# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485HD
++ .port_type = TYPE_485HD,
++# endif
++# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485FD
++ .port_type = TYPE_485FD,
++# endif
++# endif
++#else
++ .regi_ser = regi_NULL,
++ .regi_dmain = regi_NULL,
++ .regi_dmaout = regi_NULL,
++#endif
++ .write_ongoing = 0
++}, /* ttyS3 */
++#if CONFIG_ETRAX_SERIAL_PORTS == 5
++{
++#ifdef CONFIG_ETRAX_SERIAL_PORT4
++ .used = 1,
++ .irq = SER4_INTR_VECT,
++ .regi_ser = regi_ser4,
++ .regi_dmain =
++# ifdef CONFIG_ETRAX_SERIAL_PORT4_DMA9_IN
++ regi_dma9,
++# else
++ regi_NULL,
++# endif
++
++ .regi_dmaout = regi_NULL,
++# ifdef CONFIG_ETRAX_RS485
++# ifdef CONFIG_ETRAX_SERIAL_PORT4_TYPE_485HD
++ .port_type = TYPE_485HD,
++# endif
++# ifdef CONFIG_ETRAX_SERIAL_PORT4_TYPE_485FD
++ .port_type = TYPE_485FD,
++# endif
++# endif
++#else
++ .regi_ser = regi_NULL,
++ .regi_dmain = regi_NULL,
++ .regi_dmaout = regi_NULL,
++#endif
++ .write_ongoing = 0
++}, /* ttyS4 */
++#endif
++{
++#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL
++ .used = 1,
++#endif
++ .regi_ser = regi_NULL,
++ .write_ongoing = 0
++} /* Dummy console port */
++
++};
++
++/* Dummy pin used for unused CD, DSR, DTR and RI signals. */
++static unsigned long io_dummy;
++static struct crisv32_ioport dummy_port =
++{
++ &io_dummy,
++ &io_dummy,
++ &io_dummy,
++ 32
++};
++static struct crisv32_iopin dummy_pin =
++{
++ &dummy_port,
++ 0
++};
++
++static int selected_console =
++#if defined(CONFIG_ETRAX_DEBUG_PORT0)
++0;
++#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
++1;
++#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
++2;
++#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
++3;
++#elif defined(CONFIG_ETRAX_DEBUG_PORT4)
++4;
++#else /* CONFIG_ETRAX_DEBUG_PORT_NULL */
++#if CONFIG_ETRAX_SERIAL_PORTS == 5
++5;
++#else
++4;
++#endif
++#endif
++
++extern void reset_watchdog(void);
++
++static void serial_cris_stop_rx(struct uart_port *port);
++
++/*
++ * Interrupts are disabled on entering
++ */
++#ifndef CONFIG_ETRAX_VCS_SIM
++static void
++cris_console_write(struct console *co, const char *s, unsigned int count)
++{
++ struct uart_cris_port *up;
++ int i;
++ reg_ser_r_stat_din stat;
++ reg_ser_rw_tr_dma_en tr_dma_en, old;
++
++ up = &serial_cris_ports[selected_console];
++
++ /*
++ * This function isn't covered by the struct uart_ops, so we
++ * have to check manually that the port really is there,
++ * configured and live.
++ */
++ if (!up->regi_ser)
++ return;
++
++ /* Switch to manual mode. */
++ tr_dma_en = old = REG_RD (ser, up->regi_ser, rw_tr_dma_en);
++ if (tr_dma_en.en == regk_ser_yes) {
++ tr_dma_en.en = regk_ser_no;
++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
++ }
++
++ /* Send data. */
++ for (i = 0; i < count; i++) {
++ /* LF -> CRLF */
++ if (s[i] == '\n') {
++ do {
++ stat = REG_RD (ser, up->regi_ser, r_stat_din);
++ } while (!stat.tr_rdy);
++ REG_WR_INT (ser, up->regi_ser, rw_dout, '\r');
++ }
++ /* Wait until transmitter is ready and send. */
++ do {
++ stat = REG_RD (ser, up->regi_ser, r_stat_din);
++ } while (!stat.tr_rdy);
++ REG_WR_INT (ser, up->regi_ser, rw_dout, s[i]);
++
++ /* Feed watchdog, because this may take looong time. */
++ reset_watchdog();
++ }
++
++ /* Restore mode. */
++ if (tr_dma_en.en != old.en)
++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, old);
++}
++#else
++
++extern void print_str( const char *str );
++static char buffer[1024];
++static char msg[] = "Debug: ";
++static int buffer_pos = sizeof(msg) - 1;
++
++static void
++cris_console_write(struct console *co, const char *buf, unsigned int len)
++{
++ char* pos;
++ pos = memchr(buf, '\n', len);
++ if (pos) {
++ int l = ++pos - buf;
++ memcpy(buffer + buffer_pos, buf, l);
++ memcpy(buffer, msg, sizeof(msg) - 1);
++ buffer[buffer_pos + l] = '\0';
++ print_str(buffer);
++ buffer_pos = sizeof(msg) - 1;
++ if (pos - buf != len) {
++ memcpy(buffer + buffer_pos, pos, len - l);
++ buffer_pos += len - l;
++ }
++ } else {
++ memcpy(buffer + buffer_pos, buf, len);
++ buffer_pos += len;
++ }
++}
++#endif
++
++static void cris_serial_port_init(struct uart_port *port, int line);
++static int __init
++cris_console_setup(struct console *co, char *options)
++{
++ struct uart_port *port;
++ int baud = 115200;
++ int bits = 8;
++ int parity = 'n';
++ int flow = 'n';
++
++ if (co->index >= UART_NR)
++ co->index = 0;
++ if (options)
++ selected_console = co->index;
++ port = &serial_cris_ports[selected_console].port;
++ console_port = port;
++
++ co->flags |= CON_CONSDEV;
++
++ if (options)
++ uart_parse_options(options, &baud, &parity, &bits, &flow);
++ console_baud = baud;
++ cris_serial_port_init(port, selected_console);
++ co->index = port->line;
++ uart_set_options(port, co, baud, parity, bits, flow);
++
++ return 0;
++}
++
++static struct tty_driver*
++cris_console_device(struct console* co, int *index)
++{
++ struct uart_driver *p = co->data;
++ *index = selected_console;
++ return p->tty_driver;
++}
++
++static struct console cris_console = {
++ .name = "ttyS",
++ .write = cris_console_write,
++ .device = cris_console_device,
++ .setup = cris_console_setup,
++ .flags = CON_PRINTBUFFER,
++ .index = -1,
++ .data = &serial_cris_driver,
++};
++
++#define SERIAL_CRIS_CONSOLE &cris_console
++
++struct uart_driver serial_cris_driver = {
++ .owner = THIS_MODULE,
++ .driver_name = "serial",
++ .dev_name = "ttyS",
++ .major = TTY_MAJOR,
++ .minor = 64,
++ .nr = UART_NR,
++ .cons = SERIAL_CRIS_CONSOLE,
++};
++
++static int inline crisv32_serial_get_rts(struct uart_cris_port *up)
++{
++ reg_scope_instances regi_ser = up->regi_ser;
++ /*
++ * Return what the user has controlled rts to or
++ * what the pin is? (if auto_rts is used it differs during tx)
++ */
++ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);
++ return !(rstat.rts_n == regk_ser_active);
++}
++
++/*
++ * A set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
++ * 0=0V , 1=3.3V
++ */
++static inline void crisv32_serial_set_rts(struct uart_cris_port *up, int set, int force)
++{
++ reg_scope_instances regi_ser = up->regi_ser;
++
++#ifdef CONFIG_ETRAX_RS485
++ /* Never toggle RTS if port is in 485 mode. If port is in 485FD mode we
++ * do not want to send with the reciever and for 485HD mode auto_rts
++ * take care of the RTS for us.
++ */
++ if (force || !up->rs485.enabled) {
++#else
++ {
++#endif
++ unsigned long flags;
++ reg_ser_rw_rec_ctrl rec_ctrl;
++
++ local_irq_save(flags);
++ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
++
++ if (set)
++ rec_ctrl.rts_n = regk_ser_active;
++ else
++ rec_ctrl.rts_n = regk_ser_inactive;
++ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
++ local_irq_restore(flags);
++ }
++}
++
++/* Input */
++static int inline crisv32_serial_get_cts(struct uart_cris_port *up)
++{
++ reg_scope_instances regi_ser = up->regi_ser;
++ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);
++ return (rstat.cts_n == regk_ser_active);
++}
++
++/*
++ * Send a single character for XON/XOFF purposes. We do it in this separate
++ * function instead of the alternative support port.x_char, in the ...start_tx
++ * function, so we don't mix up this case with possibly enabling transmission
++ * of queued-up data (in case that's disabled after *receiving* an XOFF or
++ * negative CTS). This function is used for both DMA and non-DMA case; see HW
++ * docs specifically blessing sending characters manually when DMA for
++ * transmission is enabled and running. We may be asked to transmit despite
++ * the transmitter being disabled by a ..._stop_tx call so we need to enable
++ * it temporarily but restore the state afterwards.
++ *
++ * Beware: I'm not sure how the RS-485 stuff is supposed to work. Using
++ * XON/XOFF seems problematic if there are several controllers, but if it's
++ * actually RS-422 (multi-drop; one sender and multiple receivers), it might
++ * Just Work, so don't bail out just because it looks a little suspicious.
++ */
++
++void serial_cris_send_xchar(struct uart_port *port, char ch)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ reg_ser_rw_dout dout = { .data = ch };
++ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };
++ reg_ser_r_stat_din rstat;
++ reg_ser_rw_tr_ctrl prev_tr_ctrl, tr_ctrl;
++ reg_scope_instances regi_ser = up->regi_ser;
++ unsigned long flags;
++
++ /*
++ * Wait for tr_rdy in case a character is already being output. Make
++ * sure we have integrity between the register reads and the writes
++ * below, but don't busy-wait with interrupts off and the port lock
++ * taken.
++ */
++ spin_lock_irqsave(&port->lock, flags);
++ do {
++ spin_unlock_irqrestore(&port->lock, flags);
++ spin_lock_irqsave(&port->lock, flags);
++ prev_tr_ctrl = tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
++ rstat = REG_RD(ser, regi_ser, r_stat_din);
++ } while (!rstat.tr_rdy);
++
++ /*
++ * Ack an interrupt if one was just issued for the previous character
++ * that was output. This is required for non-DMA as the interrupt is
++ * used as the only indicator that the transmitter is ready and it
++ * isn't while this x_char is being transmitted.
++ */
++ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);
++
++ /* Enable the transmitter in case it was disabled. */
++ tr_ctrl.stop = 0;
++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
++
++ /*
++ * Finally, send the blessed character; nothing should stop it now,
++ * except for an xoff-detected state, which we'll handle below.
++ */
++ REG_WR(ser, regi_ser, rw_dout, dout);
++ up->port.icount.tx++;
++
++ /* There might be an xoff state to clear. */
++ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
++
++ /*
++ * Clear any xoff state that *may* have been there to
++ * inhibit transmission of the character.
++ */
++ if (rstat.xoff_detect) {
++ reg_ser_rw_xoff_clr xoff_clr = { .clr = 1 };
++ reg_ser_rw_tr_dma_en tr_dma_en;
++ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);
++ tr_dma_en = REG_RD(ser, regi_ser, rw_tr_dma_en);
++
++ /*
++ * If we had an xoff state but cleared it, instead sneak in a
++ * disabled state for the transmitter, after the character we
++ * sent. Thus we keep the port disabled, just as if the xoff
++ * state was still in effect (or actually, as if stop_tx had
++ * been called, as we stop DMA too).
++ */
++ prev_tr_ctrl.stop = 1;
++
++ tr_dma_en.en = 0;
++ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
++ }
++
++ /* Restore "previous" enabled/disabled state of the transmitter. */
++ REG_WR(ser, regi_ser, rw_tr_ctrl, prev_tr_ctrl);
++
++ spin_unlock_irqrestore(&port->lock, flags);
++}
++
++static void transmit_chars_dma(struct uart_cris_port *up);
++
++/*
++ * Do not spin_lock_irqsave or disable interrupts by other means here; it's
++ * already done by the caller.
++ */
++
++static void serial_cris_start_tx(struct uart_port *port)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ reg_scope_instances regi_ser = up->regi_ser;
++ reg_ser_rw_tr_ctrl tr_ctrl;
++
++ /* we have already done below if a write is ongoing */
++ if (!up->regi_dmaout && up->write_ongoing)
++ return;
++
++#ifdef CONFIG_ETRAX_RS485
++ if (up->rs485.enabled)
++ {
++ /* If we are in RS-485 mode, we need to toggle RTS and disable
++ * the receiver before initiating a DMA transfer
++ */
++
++ if (up->rs485.delay_rts_before_send > 0) {
++ reg_ser_rw_tr_ctrl tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
++ tr_ctrl.auto_rts = regk_ser_no;
++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
++ crisv32_serial_set_rts(up, up->rs485.rts_on_send, 1);
++ msleep(up->rs485.delay_rts_before_send);
++ tr_ctrl.auto_rts = regk_ser_yes;
++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
++ crisv32_serial_set_rts(up, !up->rs485.rts_on_send, 1);
++ }
++ }
++#endif
++
++ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
++ tr_ctrl.stop = regk_ser_no;
++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
++ if (!up->regi_dmaout) {
++ reg_ser_rw_intr_mask intr_mask =
++ REG_RD(ser, regi_ser, rw_intr_mask);
++ intr_mask.tr_rdy = regk_ser_yes;
++ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
++ up->write_ongoing = 1;
++ } else {
++ /*
++ * We're called possibly to re-enable transmission after it
++ * has been disabled. If so, DMA needs to be re-enabled.
++ */
++ reg_ser_rw_tr_dma_en tr_dma_en = { .en = 1 };
++ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
++ transmit_chars_dma(up);
++ }
++}
++
++/*
++ * This function handles both the DMA and non-DMA case by ordering the
++ * transmitter to stop of after the current character. We don't need to wait
++ * for any such character to be completely transmitted; we do that where it
++ * matters, like in serial_cris_set_termios. Don't busy-wait here; see
++ * Documentation/serial/driver: this function is called within
++ * spin_lock_irq{,save} and thus separate ones would be disastrous (when SMP).
++ * There's no documented need to set the txd pin to any particular value;
++ * break setting is controlled solely by serial_cris_break_ctl.
++ */
++
++static void serial_cris_stop_tx(struct uart_port *port)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ reg_scope_instances regi_ser = up->regi_ser;
++ reg_ser_rw_tr_ctrl tr_ctrl;
++ reg_ser_rw_intr_mask intr_mask;
++ reg_ser_rw_tr_dma_en tr_dma_en = {0};
++ reg_ser_rw_xoff_clr xoff_clr = {0};
++
++ /*
++ * For the non-DMA case, we'd get a tr_rdy interrupt that we're not
++ * interested in as we're not transmitting any characters. For the
++ * DMA case, that interrupt is already turned off, but no reason to
++ * waste code on conditionals here.
++ */
++ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
++ intr_mask.tr_rdy = regk_ser_no;
++ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
++
++ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
++ tr_ctrl.stop = 1;
++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
++
++ /*
++ * Always clear possible hardware xoff-detected state here, no need to
++ * unnecessary consider mctrl settings and when they change. We clear
++ * it here rather than in start_tx: both functions are called as the
++ * effect of XOFF processing, but start_tx is also called when upper
++ * levels tell the driver that there are more characters to send, so
++ * avoid adding code there.
++ */
++ xoff_clr.clr = 1;
++ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);
++
++ /*
++ * Disable transmitter DMA, so that if we're in XON/XOFF, we can send
++ * those single characters without also giving go-ahead for queued up
++ * DMA data.
++ */
++ tr_dma_en.en = 0;
++ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
++}
++
++static void serial_cris_stop_rx(struct uart_port *port)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ reg_scope_instances regi_ser = up->regi_ser;
++ reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
++
++ rec_ctrl.en = regk_ser_no;
++ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
++}
++
++static void serial_cris_enable_ms(struct uart_port *port)
++{
++}
++
++static void check_modem_status(struct uart_cris_port *up)
++{
++}
++
++static unsigned int serial_cris_tx_empty(struct uart_port *port)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ unsigned long flags;
++ unsigned int ret;
++ reg_ser_r_stat_din rstat = {0};
++
++ spin_lock_irqsave(&up->port.lock, flags);
++ if (up->regi_dmaout) {
++ /*
++ * For DMA, before looking at r_stat, we need to check that we
++ * either haven't actually started or that end-of-list is
++ * reached, else a tr_empty indication is just an internal
++ * state. The caller qualifies, if needed, that the
++ * port->info.xmit buffer is empty, so we don't need to
++ * check that.
++ */
++ reg_dma_rw_stat status = REG_RD(dma, up->regi_dmaout, rw_stat);
++
++ if (!up->tx_started) {
++ ret = 1;
++ goto done;
++ }
++
++ if (status.list_state != regk_dma_data_at_eol) {
++ ret = 0;
++ goto done;
++ }
++ }
++
++ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
++ ret = rstat.tr_empty ? TIOCSER_TEMT : 0;
++
++ done:
++ spin_unlock_irqrestore(&up->port.lock, flags);
++ return ret;
++}
++static unsigned int serial_cris_get_mctrl(struct uart_port *port)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ unsigned int ret;
++
++ ret = 0;
++ if (crisv32_serial_get_rts(up))
++ ret |= TIOCM_RTS;
++ /* DTR is active low */
++ if (!crisv32_io_rd(&up->dtr_pin))
++ ret |= TIOCM_DTR;
++ /* CD is active low */
++ if (!crisv32_io_rd(&up->cd_pin))
++ ret |= TIOCM_CD;
++ /* RI is active low */
++ if (!crisv32_io_rd(&up->ri_pin))
++ ret |= TIOCM_RI;
++ /* DSR is active low */
++ if (!crisv32_io_rd(&up->dsr_pin))
++ ret |= TIOCM_DSR;
++ if (crisv32_serial_get_cts(up))
++ ret |= TIOCM_CTS;
++ return ret;
++}
++
++static void serial_cris_set_mctrl(struct uart_port *port, unsigned int mctrl)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++
++ crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0, 0);
++ /* DTR is active low */
++ crisv32_io_set(&up->dtr_pin, mctrl & TIOCM_DTR ? 0 : 1);
++ /* RI is active low */
++ crisv32_io_set(&up->ri_pin, mctrl & TIOCM_RNG ? 0 : 1);
++ /* CD is active low */
++ crisv32_io_set(&up->cd_pin, mctrl & TIOCM_CD ? 0 : 1);
++}
++
++static void serial_cris_break_ctl(struct uart_port *port, int break_state)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ unsigned long flags;
++ reg_ser_rw_tr_ctrl tr_ctrl;
++ reg_ser_rw_tr_dma_en tr_dma_en;
++ reg_ser_rw_intr_mask intr_mask;
++
++ spin_lock_irqsave(&up->port.lock, flags);
++ tr_ctrl = REG_RD(ser, up->regi_ser, rw_tr_ctrl);
++ tr_dma_en = REG_RD(ser, up->regi_ser, rw_tr_dma_en);
++ intr_mask = REG_RD(ser, up->regi_ser, rw_intr_mask);
++
++ if (break_state != 0) { /* Send break */
++ /*
++ * We need to disable DMA (if used) or tr_rdy interrupts if no
++ * DMA. No need to make this conditional on use of DMA;
++ * disabling will be a no-op for the other mode.
++ */
++ intr_mask.tr_rdy = regk_ser_no;
++ tr_dma_en.en = 0;
++
++ /*
++ * Stop transmission and set the txd pin to 0 after the
++ * current character. The txd setting will take effect after
++ * any current transmission has completed.
++ */
++ tr_ctrl.stop = 1;
++ tr_ctrl.txd = 0;
++ } else {
++ /* Re-enable either transmit DMA or the serial interrupt. */
++ if (up->regi_dmaout)
++ tr_dma_en.en = 1;
++ else
++ intr_mask.tr_rdy = regk_ser_yes;
++
++
++ tr_ctrl.stop = 0;
++ tr_ctrl.txd = 1;
++ }
++ REG_WR(ser, up->regi_ser, rw_tr_ctrl, tr_ctrl);
++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
++ REG_WR(ser, up->regi_ser, rw_intr_mask, intr_mask);
++
++ spin_unlock_irqrestore(&up->port.lock, flags);
++}
++
++/*
++ * The output DMA channel is free - use it to send as many chars as
++ * possible.
++ */
++
++static void
++transmit_chars_dma(struct uart_cris_port *up)
++{
++ struct dma_descr_data *descr, *pending_descr, *dmapos;
++ struct dma_descr_data *last_tx_descr;
++ struct circ_buf *xmit = &up->port.state->xmit;
++ unsigned int sentl = 0;
++ reg_dma_rw_ack_intr ack_intr = { .data = regk_dma_yes };
++ reg_dma_rw_stat status;
++ reg_scope_instances regi_dmaout = up->regi_dmaout;
++ unsigned int chars_in_q;
++ unsigned int chars_to_send;
++
++ /* Acknowledge dma data descriptor irq, if there was one. */
++ REG_WR(dma, regi_dmaout, rw_ack_intr, ack_intr);
++
++ /*
++ * First get the amount of bytes sent during the last DMA transfer,
++ * and update xmit accordingly.
++ */
++ status = REG_RD(dma, regi_dmaout, rw_stat);
++ if (status.list_state == regk_dma_data_at_eol || !up->tx_started)
++ dmapos = phys_to_virt((int)up->last_tx_descr->next);
++ else
++ dmapos = phys_to_virt(REG_RD_INT(dma, regi_dmaout, rw_data));
++
++ pending_descr = up->first_tx_descr;
++ while (pending_descr != dmapos) {
++ sentl += pending_descr->after - pending_descr->buf;
++ pending_descr->after = pending_descr->buf = NULL;
++ pending_descr = phys_to_virt((int)pending_descr->next);
++ }
++
++ up->first_tx_descr = pending_descr;
++ last_tx_descr = up->last_tx_descr;
++
++ /* Update stats. */
++ up->port.icount.tx += sentl;
++
++ up->tx_pending_chars -= sentl;
++
++ /* Update xmit buffer. */
++ xmit->tail = (xmit->tail + sentl) & (UART_XMIT_SIZE - 1);
++
++ /*
++ * Find out the largest amount of consecutive bytes we want to send
++ * now.
++ */
++ chars_in_q = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
++
++ if (chars_in_q == 0)
++ /* Tell upper layers that we're now idle. */
++ goto done;
++
++ /* Some of those characters are actually pending output. */
++ chars_to_send = chars_in_q - up->tx_pending_chars;
++
++ /*
++ * Clamp the new number of pending chars to the advertised
++ * one.
++ */
++ if (chars_to_send + up->tx_pending_chars > up->port.fifosize)
++ chars_to_send = up->port.fifosize - up->tx_pending_chars;
++
++ /* If we don't want to send any, we're done. */
++ if (chars_to_send == 0)
++ goto done;
++
++ descr = phys_to_virt((int)last_tx_descr->next);
++
++ /*
++ * We can't send anything if we could make the condition in
++ * the while-loop above (reaping finished descriptors) be met
++ * immediately before the first iteration. However, don't
++ * mistake the full state for the empty state.
++ */
++ if ((descr == up->first_tx_descr && up->tx_pending_chars != 0)
++ || descr->next == up->first_tx_descr)
++ goto done;
++
++ /* Set up the descriptor for output. */
++ descr->buf = (void*)virt_to_phys(xmit->buf + xmit->tail
++ + up->tx_pending_chars);
++ descr->after = descr->buf + chars_to_send;
++ descr->eol = 1;
++ descr->out_eop = 0;
++ descr->intr = 1;
++ descr->wait = 0;
++ descr->in_eop = 0;
++ descr->md = 0;
++ /*
++ * Make sure GCC doesn't move this eol clear before the eol set
++ * above.
++ */
++ barrier();
++ last_tx_descr->eol = 0;
++
++ up->last_tx_descr = descr;
++ up->tx_pending_chars += chars_to_send;
++
++ if (!up->tx_started) {
++ up->tx_started = 1;
++ up->tr_context_descr.next = 0;
++ up->tr_context_descr.saved_data
++ = (dma_descr_data*)virt_to_phys(descr);
++ up->tr_context_descr.saved_data_buf = descr->buf;
++ DMA_START_CONTEXT(regi_dmaout,
++ virt_to_phys(&up->tr_context_descr));
++ } else
++ DMA_CONTINUE_DATA(regi_dmaout);
++
++ /* DMA is now running (hopefully). */
++
++ done:
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(&up->port);
++}
++
++static void
++transmit_chars_no_dma(struct uart_cris_port *up)
++{
++ int max_count;
++ struct circ_buf *xmit = &up->port.state->xmit;
++
++ reg_scope_instances regi_ser = up->regi_ser;
++ reg_ser_r_stat_din rstat;
++ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };
++
++ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
++ /* No more to send, so disable the interrupt. */
++ reg_ser_rw_intr_mask intr_mask;
++ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
++ intr_mask.tr_rdy = 0;
++ intr_mask.tr_empty = 0;
++ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
++ up->write_ongoing=0;
++ return;
++ }
++
++ /* If the serport is fast, we send up to max_count bytes before
++ exiting the loop. */
++ max_count = 64;
++ do {
++ reg_ser_rw_dout dout = { .data = xmit->buf[xmit->tail] };
++ REG_WR(ser, regi_ser, rw_dout, dout);
++ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);
++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
++ up->port.icount.tx++;
++ if (xmit->head == xmit->tail)
++ break;
++ rstat = REG_RD(ser, regi_ser, r_stat_din);
++ } while ((--max_count > 0) && rstat.tr_rdy);
++
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(&up->port);
++} /* transmit_chars_no_dma */
++
++static struct etrax_recv_buffer *
++alloc_recv_buffer(unsigned int size)
++{
++ struct etrax_recv_buffer *buffer;
++
++ if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC)))
++ panic("%s: Could not allocate %d bytes buffer\n",
++ __FUNCTION__, size);
++
++ buffer->next = NULL;
++ buffer->length = 0;
++ buffer->error = TTY_NORMAL;
++
++ return buffer;
++}
++
++static void
++append_recv_buffer(struct uart_cris_port *up,
++ struct etrax_recv_buffer *buffer)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ if (!up->first_recv_buffer)
++ up->first_recv_buffer = buffer;
++ else
++ up->last_recv_buffer->next = buffer;
++
++ up->last_recv_buffer = buffer;
++
++ up->recv_cnt += buffer->length;
++ if (up->recv_cnt > up->max_recv_cnt)
++ up->max_recv_cnt = up->recv_cnt;
++
++ local_irq_restore(flags);
++}
++
++static int
++add_char_and_flag(struct uart_cris_port *up, unsigned char data,
++ unsigned char flag)
++{
++ struct etrax_recv_buffer *buffer;
++
++ buffer = alloc_recv_buffer(4);
++ buffer->length = 1;
++ buffer->error = flag;
++ buffer->buffer[0] = data;
++
++ append_recv_buffer(up, buffer);
++
++ up->port.icount.rx++;
++
++ return 1;
++}
++
++static void
++flush_to_flip_buffer(struct uart_cris_port *up)
++{
++ struct etrax_recv_buffer *buffer;
++
++ if (!up->first_recv_buffer)
++ return;
++
++ while ((buffer = up->first_recv_buffer)) {
++ unsigned int count = (unsigned int)
++ tty_insert_flip_string(&up->port.state->port,
++ buffer->buffer,
++ buffer->length);
++
++ up->recv_cnt -= count;
++
++ if (count == buffer->length) {
++ up->first_recv_buffer = buffer->next;
++ kfree(buffer);
++ } else {
++ buffer->length -= count;
++ memmove(buffer->buffer, buffer->buffer + count,
++ buffer->length);
++ buffer->error = TTY_NORMAL;
++ }
++ }
++
++ if (!up->first_recv_buffer)
++ up->last_recv_buffer = NULL;
++
++ /* This call includes a check for low-latency. */
++ tty_flip_buffer_push(&up->port.state->port);
++}
++
++static unsigned int
++handle_descr_data(struct uart_cris_port *up, struct dma_descr_data *descr,
++ unsigned int recvl)
++{
++ struct etrax_recv_buffer *buffer
++ = phys_to_virt((unsigned long)descr->buf) - sizeof *buffer;
++
++ if (up->recv_cnt + recvl > 65536) {
++ printk(KERN_ERR "Too much pending incoming data on %s!"
++ " Dropping %u bytes.\n", up->port.state->port.tty->name,
++ recvl);
++ return 0;
++ }
++
++ buffer->length = recvl;
++
++ append_recv_buffer(up, buffer);
++
++ flush_to_flip_buffer(up);
++
++ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
++ descr->buf = (void*)virt_to_phys(buffer->buffer);
++ descr->after = descr->buf + SERIAL_DESCR_BUF_SIZE;
++
++ return recvl;
++}
++
++static unsigned int
++handle_all_descr_data(struct uart_cris_port *up)
++{
++ struct dma_descr_data *descr
++ = &up->rec_descr[(up->cur_rec_descr - 1)
++ % SERIAL_RECV_DESCRIPTORS];
++ struct dma_descr_data *prev_descr;
++ unsigned int recvl;
++ unsigned int ret = 0;
++ reg_scope_instances regi_dmain = up->regi_dmain;
++
++ while (1) {
++ prev_descr = descr;
++ descr = &up->rec_descr[up->cur_rec_descr];
++
++ if (descr == phys_to_virt(REG_RD(dma, regi_dmain, rw_data)))
++ break;
++
++ if (++up->cur_rec_descr == SERIAL_RECV_DESCRIPTORS)
++ up->cur_rec_descr = 0;
++
++ /* Find out how many bytes were read. */
++ recvl = descr->after - descr->buf;
++
++ /* Update stats. */
++ up->port.icount.rx += recvl;
++
++ ret += handle_descr_data(up, descr, recvl);
++ descr->eol = 1;
++ /*
++ * Make sure GCC doesn't move this eol clear before the
++ * eol set above.
++ */
++ barrier();
++ prev_descr->eol = 0;
++ flush_dma_descr(descr,1); // Cache bug workaround
++ flush_dma_descr(prev_descr,0); // Cache bug workaround
++ }
++
++ return ret;
++}
++
++static void
++receive_chars_dma(struct uart_cris_port *up)
++{
++ reg_ser_r_stat_din rstat;
++ reg_dma_rw_ack_intr ack_intr = {0};
++
++ /* Acknowledge both dma_descr and dma_eop irq. */
++ ack_intr.data = 1;
++ ack_intr.in_eop = 1;
++ REG_WR(dma, up->regi_dmain, rw_ack_intr, ack_intr);
++
++ handle_all_descr_data(up);
++
++ /* Read the status register to detect errors. */
++ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
++
++ if (rstat.framing_err | rstat.par_err | rstat.orun) {
++ /*
++ * If we got an error, we must reset it by reading the
++ * rs_stat_din register and put the data in buffer manually.
++ */
++ reg_ser_rs_stat_din stat_din;
++ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din);
++
++ if (stat_din.par_err)
++ add_char_and_flag(up, stat_din.data, TTY_PARITY);
++ else if (stat_din.orun)
++ add_char_and_flag(up, stat_din.data, TTY_OVERRUN);
++ else if (stat_din.framing_err)
++ add_char_and_flag(up, stat_din.data, TTY_FRAME);
++ }
++
++ /* Restart the receiving DMA, in case it got stuck on an EOL. */
++ DMA_CONTINUE_DATA(up->regi_dmain);
++}
++
++void receive_chars_no_dma(struct uart_cris_port *up)
++{
++ reg_ser_rs_stat_din stat_din;
++ reg_ser_r_stat_din rstat;
++ struct uart_icount *icount;
++ int max_count = 16;
++ char flag;
++ reg_ser_rw_ack_intr ack_intr = { 0 };
++
++ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
++ up->last_rx_active_usec = GET_JIFFIES_USEC();
++ up->last_rx_active = jiffies;
++ icount = &up->port.icount;
++
++ do {
++ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din);
++
++ flag = TTY_NORMAL;
++ ack_intr.dav = 1;
++ REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr);
++ icount->rx++;
++
++ if (stat_din.framing_err | stat_din.par_err | stat_din.orun) {
++ if (stat_din.data == 0x00 &&
++ stat_din.framing_err) {
++ /* Most likely a break. */
++ flag = TTY_BREAK;
++ icount->brk++;
++ } else if (stat_din.par_err) {
++ flag = TTY_PARITY;
++ icount->parity++;
++ } else if (stat_din.orun) {
++ flag = TTY_OVERRUN;
++ icount->overrun++;
++ } else if (stat_din.framing_err) {
++ flag = TTY_FRAME;
++ icount->frame++;
++ }
++ }
++
++ /*
++ * If this becomes important, we probably *could* handle this
++ * gracefully by keeping track of the unhandled character.
++ */
++ if (!tty_insert_flip_char(&up->port.state->port, stat_din.data, flag))
++ panic("%s: No tty buffer space", __FUNCTION__);
++ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
++ } while (rstat.dav && (max_count-- > 0));
++ spin_unlock(&up->port.lock);
++ tty_flip_buffer_push(&up->port.state->port);
++ spin_lock(&up->port.lock);
++} /* receive_chars_no_dma */
++
++/*
++ * DMA output channel interrupt handler.
++ * this interrupt is called from DMA2(ser2), DMA8(ser3), DMA6(ser0) or
++ * DMA4(ser1) when they have finished a descriptor with the intr flag set.
++ */
++static irqreturn_t dma_tr_interrupt(int irq, void *dev_id)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
++ reg_dma_r_masked_intr masked_intr;
++ reg_scope_instances regi_dmaout;
++ int handled = 0;
++
++ spin_lock(&up->port.lock);
++ regi_dmaout = up->regi_dmaout;
++ if (!regi_dmaout) {
++ spin_unlock(&up->port.lock);
++ return IRQ_NONE;
++ }
++
++ /*
++ * Check for dma_descr (don't need to check for dma_eop in
++ * output DMA for serial).
++ */
++ masked_intr = REG_RD(dma, regi_dmaout, r_masked_intr);
++
++ if (masked_intr.data) {
++ /* We can send a new dma bunch. make it so. */
++
++ /*
++ * Read jiffies_usec first.
++ * We want this time to be as late as possible.
++ */
++ up->last_tx_active_usec = GET_JIFFIES_USEC();
++ up->last_tx_active = jiffies;
++ transmit_chars_dma(up);
++ handled = 1;
++ }
++ check_modem_status(up);
++ spin_unlock(&up->port.lock);
++ return IRQ_RETVAL(handled);
++}
++
++/* DMA input channel interrupt handler. */
++
++static irqreturn_t
++dma_rec_interrupt(int irq, void *dev_id)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
++ reg_dma_r_masked_intr masked_intr;
++ reg_scope_instances regi_dmain;
++ int handled = 0;
++
++ spin_lock(&up->port.lock);
++ regi_dmain = up->regi_dmain;
++ if (!regi_dmain) {
++ spin_unlock(&up->port.lock);
++ return IRQ_NONE;
++ }
++
++ /* Check for both dma_eop and dma_descr for the input dma channel. */
++ masked_intr = REG_RD(dma, regi_dmain, r_masked_intr);
++ if (masked_intr.data || masked_intr.in_eop) {
++ /* We have received something. */
++ receive_chars_dma(up);
++ handled = 1;
++ }
++ check_modem_status(up);
++ spin_unlock(&up->port.lock);
++ return IRQ_RETVAL(handled);
++}
++
++/* "Normal" serial port interrupt handler - both rx and tx. */
++
++static irqreturn_t
++ser_interrupt(int irq, void *dev_id)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
++ reg_scope_instances regi_ser;
++ int handled = 0;
++
++ spin_lock(&up->port.lock);
++ if (up->regi_dmain && up->regi_dmaout) {
++ spin_unlock(&up->port.lock);
++ return IRQ_NONE;
++ }
++
++ regi_ser = up->regi_ser;
++
++ if (regi_ser) {
++ reg_ser_r_masked_intr masked_intr;
++ masked_intr = REG_RD(ser, regi_ser, r_masked_intr);
++ /*
++ * Check what interrupts are active before taking
++ * actions. If DMA is used the interrupt shouldn't
++ * be enabled.
++ */
++ if (masked_intr.dav) {
++ receive_chars_no_dma(up);
++ handled = 1;
++ }
++ check_modem_status(up);
++
++ if (masked_intr.tr_rdy) {
++ transmit_chars_no_dma(up);
++ handled = 1;
++ }
++ }
++ spin_unlock(&up->port.lock);
++ return IRQ_RETVAL(handled);
++} /* ser_interrupt */
++
++static int start_recv_dma(struct uart_cris_port *up)
++{
++ struct dma_descr_data *descr = up->rec_descr;
++ struct etrax_recv_buffer *buffer;
++ int i;
++
++ /* Set up the receiving descriptors. */
++ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
++ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
++ descr[i].next = (void*)virt_to_phys(&descr[i+1]);
++ descr[i].buf = (void*)virt_to_phys(buffer->buffer);
++ descr[i].after = descr[i].buf + SERIAL_DESCR_BUF_SIZE;
++ descr[i].eol = 0;
++ descr[i].out_eop = 0;
++ descr[i].intr = 1;
++ descr[i].wait = 0;
++ descr[i].in_eop = 0;
++ descr[i].md = 0;
++
++ }
++
++ /* Link the last descriptor to the first. */
++ descr[i-1].next = (void*)virt_to_phys(&descr[0]);
++
++ /* And mark it as end of list. */
++ descr[i-1].eol = 1;
++
++ /* Start with the first descriptor in the list. */
++ up->cur_rec_descr = 0;
++ up->rec_context_descr.next = 0;
++ up->rec_context_descr.saved_data
++ = (dma_descr_data *)virt_to_phys(&descr[up->cur_rec_descr]);
++ up->rec_context_descr.saved_data_buf = descr[up->cur_rec_descr].buf;
++
++ /* Start the DMA. */
++ DMA_START_CONTEXT(up->regi_dmain,
++ virt_to_phys(&up->rec_context_descr));
++
++ /* Input DMA should be running now. */
++ return 1;
++}
++
++#ifdef CONFIG_CONSOLE_POLL
++/*
++ * Console polling routines for writing and reading from the uart while
++ * in an interrupt or debug context.
++ */
++
++static int serial_artpec_get_poll_char(struct uart_port *port)
++{
++ reg_ser_rs_stat_din stat;
++ reg_ser_rw_ack_intr ack_intr = { 0 };
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++
++ do {
++ stat = REG_RD(ser, up->regi_ser, rs_stat_din);
++ } while (!stat.dav);
++
++ /* Ack the data_avail interrupt. */
++ ack_intr.dav = 1;
++ REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr);
++
++ return stat.data;
++}
++
++static void serial_artpec_put_poll_char(struct uart_port *port,
++ unsigned char c)
++{
++ reg_ser_r_stat_din stat;
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++
++ do {
++ stat = REG_RD (ser, up->regi_ser, r_stat_din);
++ } while (!stat.tr_rdy);
++ REG_WR_INT (ser, up->regi_ser, rw_dout, c);
++}
++#endif /* CONFIG_CONSOLE_POLL */
++
++static void start_receive(struct uart_cris_port *up)
++{
++ reg_scope_instances regi_dmain = up->regi_dmain;
++ if (regi_dmain) {
++ start_recv_dma(up);
++ }
++}
++
++
++static void start_transmitter(struct uart_cris_port *up)
++{
++ int i;
++ reg_scope_instances regi_dmaout = up->regi_dmaout;
++ if (regi_dmaout) {
++ for (i = 0; i < SERIAL_TX_DESCRIPTORS; i++) {
++ memset(&up->tr_descr[i], 0, sizeof(up->tr_descr[i]));
++ up->tr_descr[i].eol = 1;
++ up->tr_descr[i].intr = 1;
++ up->tr_descr[i].next = (dma_descr_data *)
++ virt_to_phys(&up->tr_descr[i+1]);
++ }
++ up->tr_descr[i-1].next = (dma_descr_data *)
++ virt_to_phys(&up->tr_descr[0]);
++ up->first_tx_descr = &up->tr_descr[0];
++
++ /*
++ * We'll be counting up to up->last_tx_descr->next from
++ * up->first_tx_descr when starting DMA, so we should make
++ * them the same for the very first round. If instead we'd
++ * set last_tx_descr = first_tx_descr, we'd rely on
++ * accidentally working code and data as we'd take a pass over
++ * the first, unused, descriptor.
++ */
++ up->last_tx_descr = &up->tr_descr[i-1];
++ up->tx_started = 0;
++ up->tx_pending_chars = 0;
++ }
++}
++
++static int serial_cris_startup(struct uart_port *port)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ unsigned long flags;
++ reg_ser_rw_intr_mask ser_intr_mask = {0};
++ reg_dma_rw_intr_mask dmain_intr_mask = {0};
++ reg_dma_rw_intr_mask dmaout_intr_mask = {0};
++ reg_dma_rw_cfg cfg = {.en = 1};
++ reg_scope_instances regi_dma;
++
++ /* We dont disable interrupts here because request_irq should
++ not be called with ints disabled. */
++ spin_lock(&up->port.lock);
++
++ dmain_intr_mask.data = dmain_intr_mask.in_eop = regk_dma_yes;
++ dmaout_intr_mask.data = regk_dma_yes;
++ if (!up->regi_dmain)
++ ser_intr_mask.dav = regk_ser_yes;
++
++ if (port->line == 0) {
++ if (request_irq(SER0_INTR_VECT, ser_interrupt,
++ IRQF_DISABLED, "ser0",
++ &serial_cris_ports[0]))
++ panic("irq ser0");
++ /* Port ser0 can use dma6 for tx and dma7 for rx. */
++#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
++ if (request_irq(DMA6_INTR_VECT, dma_tr_interrupt,
++ IRQF_DISABLED, "serial 0 dma tr",
++ &serial_cris_ports[0]))
++ panic("irq ser0txdma");
++ crisv32_request_dma(6, "ser0", DMA_PANIC_ON_ERROR, 0,
++ dma_ser0);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
++ if (request_irq(DMA7_INTR_VECT, dma_rec_interrupt,
++ IRQF_DISABLED, "serial 0 dma rec",
++ &serial_cris_ports[0]))
++ panic("irq ser0rxdma");
++ crisv32_request_dma(7, "ser0", DMA_PANIC_ON_ERROR, 0,
++ dma_ser0);
++#endif
++ } else if (port->line == 1) {
++ if (request_irq(SER1_INTR_VECT, ser_interrupt,
++ IRQF_DISABLED, "ser1",
++ &serial_cris_ports[1]))
++ panic("irq ser1");
++
++ /* Port ser1 can use dma4 for tx and dma5 for rx. */
++#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT
++ if (request_irq(DMA4_INTR_VECT, dma_tr_interrupt,
++ IRQF_DISABLED, "serial 1 dma tr",
++ &serial_cris_ports[1]))
++ panic("irq ser1txdma");
++ crisv32_request_dma(4, "ser1", DMA_PANIC_ON_ERROR, 0,
++ dma_ser1);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN
++ if (request_irq(DMA5_INTR_VECT, dma_rec_interrupt,
++ IRQF_DISABLED, "serial 1 dma rec",
++ &serial_cris_ports[1]))
++ panic("irq ser1rxdma");
++ crisv32_request_dma(5, "ser1", DMA_PANIC_ON_ERROR, 0,
++ dma_ser1);
++#endif
++ } else if (port->line == 2) {
++ if (request_irq(SER2_INTR_VECT, ser_interrupt,
++ IRQF_DISABLED, "ser2",
++ &serial_cris_ports[2]))
++ panic("irq ser2");
++
++ /* Port ser2 can use dma2 for tx and dma3 for rx. */
++#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
++ if (request_irq(DMA2_INTR_VECT, dma_tr_interrupt,
++ IRQF_DISABLED, "serial 2 dma tr",
++ &serial_cris_ports[2]))
++ panic("irq ser2txdma");
++ crisv32_request_dma(2, "ser2", DMA_PANIC_ON_ERROR, 0,
++ dma_ser2);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
++ if (request_irq(DMA3_INTR_VECT, dma_rec_interrupt,
++ IRQF_DISABLED, "serial 2 dma rec",
++ &serial_cris_ports[2]))
++ panic("irq ser2rxdma");
++ crisv32_request_dma(3, "ser2", DMA_PANIC_ON_ERROR, 0,
++ dma_ser2);
++#endif
++ } else if (port->line == 3) {
++ if (request_irq(SER3_INTR_VECT, ser_interrupt,
++ IRQF_DISABLED, "ser3",
++ &serial_cris_ports[3]))
++ panic("irq ser3" );
++
++ /* Port ser3 can use dma8 for tx and dma9 for rx. */
++#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT
++ if (request_irq(DMA8_INTR_VECT, dma_tr_interrupt,
++ IRQF_DISABLED, "serial 3 dma tr",
++ &serial_cris_ports[3]))
++ panic("irq ser3txdma");
++ crisv32_request_dma(8, "ser3", DMA_PANIC_ON_ERROR, 0,
++ dma_ser3);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN
++ if (request_irq(DMA9_INTR_VECT, dma_rec_interrupt,
++ IRQF_DISABLED, "serial 3 dma rec",
++ &serial_cris_ports[3]))
++ panic("irq ser3rxdma");
++ crisv32_request_dma(9, "ser3", DMA_PANIC_ON_ERROR, 0,
++ dma_ser3);
++#endif
++ }
++#if CONFIG_ETRAX_SERIAL_PORTS == 5
++ else if (port->line == 4) {
++ if (request_irq(SER4_INTR_VECT, ser_interrupt,
++ IRQF_DISABLED, "ser4",
++ &serial_cris_ports[4]))
++ panic("irq ser4" );
++
++#ifdef CONFIG_ETRAX_SERIAL_PORT4_DMA_OUT
++ if (request_irq(DMA4_INTR_VECT, dma_tr_interrupt,
++ IRQF_DISABLED, "serial 4 dma tr",
++ &serial_cris_ports[4]))
++ panic("irq ser4txdma");
++ crisv32_request_dma(5, "ser4", DMA_PANIC_ON_ERROR, 0,
++ dma_ser4);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT4_DMA_IN
++ if (request_irq(DMA5_INTR_VECT, dma_rec_interrupt,
++ IRQF_DISABLED, "serial 4 dma rec",
++ &serial_cris_ports[4]))
++ panic("irq ser4rxdma");
++ crisv32_request_dma(5, "ser4", DMA_PANIC_ON_ERROR, 0,
++ dma_ser4);
++#endif
++ }
++#endif
++
++ local_irq_save(flags);
++
++ /*
++ * Reset the DMA channels and make sure their interrupts are cleared.
++ */
++
++ regi_dma = up->regi_dmain;
++ if (regi_dma) {
++ reg_dma_rw_ack_intr ack_intr = { 0 };
++ DMA_RESET(regi_dma);
++ /* Wait until reset cycle is complete. */
++ DMA_WAIT_UNTIL_RESET(regi_dma);
++ REG_WR(dma, regi_dma, rw_cfg, cfg);
++ /* Make sure the irqs are cleared. */
++ ack_intr.group = 1;
++ ack_intr.ctxt = 1;
++ ack_intr.data = 1;
++ ack_intr.in_eop = 1;
++ ack_intr.stream_cmd = 1;
++ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr);
++ }
++ regi_dma = up->regi_dmaout;
++ if (regi_dma) {
++ reg_dma_rw_ack_intr ack_intr = { 0 };
++ DMA_RESET(regi_dma);
++ /* Wait until reset cycle is complete. */
++ DMA_WAIT_UNTIL_RESET(regi_dma);
++ REG_WR(dma, regi_dma, rw_cfg, cfg);
++ /* Make sure the irqs are cleared. */
++ ack_intr.group = 1;
++ ack_intr.ctxt = 1;
++ ack_intr.data = 1;
++ ack_intr.in_eop = 1;
++ ack_intr.stream_cmd = 1;
++ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr);
++ }
++
++ REG_WR(ser, up->regi_ser, rw_intr_mask, ser_intr_mask);
++ if (up->regi_dmain)
++ REG_WR(dma, up->regi_dmain, rw_intr_mask, dmain_intr_mask);
++ if (up->regi_dmaout)
++ REG_WR(dma, up->regi_dmaout, rw_intr_mask, dmaout_intr_mask);
++
++ start_receive(up);
++ start_transmitter(up);
++
++ serial_cris_set_mctrl(&up->port, up->port.mctrl);
++
++ local_irq_restore(flags);
++ spin_unlock(&up->port.lock);
++
++ return 0;
++}
++
++static void serial_cris_shutdown(struct uart_port *port)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ unsigned long flags;
++
++ spin_lock_irqsave(&up->port.lock, flags);
++
++ serial_cris_stop_tx(port);
++ serial_cris_stop_rx(port);
++
++ if (port->line == 0) {
++ free_irq(SER0_INTR_VECT, &serial_cris_ports[0]);
++#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
++ crisv32_free_dma(6);
++ free_irq(DMA6_INTR_VECT, &serial_cris_ports[0]);
++#elif defined(CONFIG_ETRAX_SERIAL_PORT0_DMA0_OUT)
++ crisv32_free_dma(0);
++ free_irq(DMA0_INTR_VECT, &serial_cris_ports[0]);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
++ crisv32_free_dma(7);
++ free_irq(DMA7_INTR_VECT, &serial_cris_ports[0]);
++#elif defined(CONFIG_ETRAX_SERIAL_PORT0_DMA1_IN)
++ crisv32_free_dma(1);
++ free_irq(DMA1_INTR_VECT, &serial_cris_ports[0]);
++#endif
++ } else if (port->line == 1) {
++ free_irq(SER1_INTR_VECT, &serial_cris_ports[1]);
++#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT
++ crisv32_free_dma(4);
++ free_irq(DMA4_INTR_VECT, &serial_cris_ports[1]);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN
++ crisv32_free_dma(5);
++ free_irq(DMA5_INTR_VECT, &serial_cris_ports[1]);
++#endif
++ } else if (port->line == 2) {
++ free_irq(SER2_INTR_VECT, &serial_cris_ports[2]);
++#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
++ crisv32_free_dma(2);
++ free_irq(DMA2_INTR_VECT, &serial_cris_ports[2]);
++#elif defined(CONFIG_ETRAX_SERIAL_PORT2_DMA6_OUT)
++ crisv32_free_dma(6);
++ free_irq(DMA6_INTR_VECT, &serial_cris_ports[2]);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
++ crisv32_free_dma(3);
++ free_irq(DMA3_INTR_VECT, &serial_cris_ports[2]);
++#elif defined(CONFIG_ETRAX_SERIAL_PORT2_DMA7_IN)
++ crisv32_free_dma(7);
++ free_irq(DMA7_INTR_VECT, &serial_cris_ports[2]);
++#endif
++ } else if (port->line == 3) {
++ free_irq(SER3_INTR_VECT, &serial_cris_ports[3]);
++#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT
++ crisv32_free_dma(8);
++ free_irq(DMA8_INTR_VECT, &serial_cris_ports[3]);
++#elif defined(CONFIG_ETRAX_SERIAL_PORT3_DMA2_OUT)
++ crisv32_free_dma(2);
++ free_irq(DMA2_INTR_VECT, &serial_cris_ports[3]);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN
++ crisv32_free_dma(9);
++ free_irq(DMA9_INTR_VECT, &serial_cris_ports[3]);
++#elif defined(CONFIG_ETRAX_SERIAL_PORT3_DMA3_IN)
++ crisv32_free_dma(3);
++ free_irq(DMA3_INTR_VECT, &serial_cris_ports[3]);
++#endif
++ }
++#if CONFIG_ETRAX_SERIAL_PORTS == 5
++ else if (port->line == 4) {
++ free_irq(SER4_INTR_VECT, &serial_cris_ports[4]);
++#ifdef CONFIG_ETRAX_SERIAL_PORT4_DMA9_IN
++ crisv32_free_dma(9);
++ free_irq(DMA9_INTR_VECT, &serial_cris_ports[4]);
++#endif
++ }
++#endif
++
++ serial_cris_set_mctrl(&up->port, up->port.mctrl);
++
++ if (up->regi_dmain) {
++ struct etrax_recv_buffer *rb;
++ struct etrax_recv_buffer *rb_next;
++ int i;
++ struct dma_descr_data *descr;
++
++ /*
++ * In case of DMA and receive errors, there might be pending
++ * receive buffers still linked here and not flushed upwards.
++ * Release them.
++ */
++ for (rb = up->first_recv_buffer; rb != NULL; rb = rb_next) {
++ rb_next = rb->next;
++ kfree (rb);
++ }
++ up->first_recv_buffer = NULL;
++ up->last_recv_buffer = NULL;
++
++ /*
++ * Also release buffers that were attached to the DMA
++ * before we shut down the hardware above.
++ */
++ for (i = 0, descr = up->rec_descr;
++ i < SERIAL_RECV_DESCRIPTORS;
++ i++)
++ if (descr[i].buf) {
++ rb = phys_to_virt((u32) descr[i].buf)
++ - sizeof *rb;
++ kfree(rb);
++ descr[i].buf = NULL;
++ }
++ }
++
++ spin_unlock_irqrestore(&up->port.lock, flags);
++
++}
++
++static void
++serial_cris_set_termios(struct uart_port *port, struct ktermios *termios,
++ struct ktermios *old)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ unsigned long flags;
++ reg_ser_rw_xoff xoff;
++ reg_ser_rw_xoff_clr xoff_clr = {0};
++ reg_ser_rw_tr_ctrl tx_ctrl = {0};
++ reg_ser_rw_tr_dma_en tx_dma_en = {0};
++ reg_ser_rw_rec_ctrl rx_ctrl = {0};
++ reg_ser_rw_tr_baud_div tx_baud_div = {0};
++ reg_ser_rw_rec_baud_div rx_baud_div = {0};
++ reg_ser_r_stat_din rstat;
++ int baud;
++
++ if (old &&
++ termios->c_cflag == old->c_cflag &&
++ termios->c_iflag == old->c_iflag)
++ return;
++
++ /* Start with default settings and then fill in changes. */
++
++ /* Tx: 8 bit, no/even parity, 1 stop bit, no cts. */
++ tx_ctrl.base_freq = regk_ser_f29_493;
++ tx_ctrl.en = 0;
++ tx_ctrl.stop = 0;
++#ifdef CONFIG_ETRAX_RS485
++ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) {
++ tx_ctrl.auto_rts = regk_ser_yes;
++ tx_ctrl.rts_setup = regk_ser_bits2;
++
++ if (termios->c_cflag & CSTOPB) {
++ /* 2 stop bits. */
++ tx_ctrl.rts_delay = regk_ser_del2;
++ }
++ else {
++ /* 1 stop bits. */
++ tx_ctrl.rts_delay = regk_ser_del1;
++ }
++ } else
++#endif
++ tx_ctrl.auto_rts = regk_ser_no;
++ tx_ctrl.txd = 1;
++ tx_ctrl.auto_cts = 0;
++ /* Rx: 8 bit, no/even parity. */
++ if (up->regi_dmain) {
++ rx_ctrl.dma_mode = 1;
++ rx_ctrl.auto_eop = 1;
++ }
++ rx_ctrl.dma_err = regk_ser_stop;
++ rx_ctrl.sampling = regk_ser_majority;
++ rx_ctrl.timeout = 1;
++
++#ifdef CONFIG_ETRAX_RS485
++ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) {
++# ifdef CONFIG_ETRAX_RS485_DISABLE_RECEIVER
++ rx_ctrl.half_duplex = regk_ser_yes;
++# endif
++ rx_ctrl.rts_n = up->rs485.rts_after_sent ?
++ regk_ser_active : regk_ser_inactive;
++ } else if (up->port_type == TYPE_485FD) {
++ rx_ctrl.rts_n = regk_ser_active;
++ } else
++#endif
++ rx_ctrl.rts_n = regk_ser_inactive;
++
++ /* Common for tx and rx: 8N1. */
++ tx_ctrl.data_bits = regk_ser_bits8;
++ rx_ctrl.data_bits = regk_ser_bits8;
++ tx_ctrl.par = regk_ser_even;
++ rx_ctrl.par = regk_ser_even;
++ tx_ctrl.par_en = regk_ser_no;
++ rx_ctrl.par_en = regk_ser_no;
++
++ tx_ctrl.stop_bits = regk_ser_bits1;
++
++
++ /* Change baud-rate and write it to the hardware. */
++
++ /* baud_clock = base_freq / (divisor*8)
++ * divisor = base_freq / (baud_clock * 8)
++ * base_freq is either:
++ * off, ext, 29.493MHz, 32.000 MHz, 32.768 MHz or 100 MHz
++ * 20.493MHz is used for standard baudrates
++ */
++
++ /*
++ * For the console port we keep the original baudrate here. Not very
++ * beautiful.
++ */
++ if ((port != console_port) || old)
++ baud = uart_get_baud_rate(port, termios, old, 0,
++ port->uartclk / 8);
++ else
++ baud = console_baud;
++
++ tx_baud_div.div = 29493000 / (8 * baud);
++ /* Rx uses same as tx. */
++ rx_baud_div.div = tx_baud_div.div;
++ rx_ctrl.base_freq = tx_ctrl.base_freq;
++
++ if ((termios->c_cflag & CSIZE) == CS7) {
++ /* Set 7 bit mode. */
++ tx_ctrl.data_bits = regk_ser_bits7;
++ rx_ctrl.data_bits = regk_ser_bits7;
++ }
++
++ if (termios->c_cflag & CSTOPB) {
++ /* Set 2 stop bit mode. */
++ tx_ctrl.stop_bits = regk_ser_bits2;
++ }
++
++ if (termios->c_cflag & PARENB) {
++ /* Enable parity. */
++ tx_ctrl.par_en = regk_ser_yes;
++ rx_ctrl.par_en = regk_ser_yes;
++ }
++
++ if (termios->c_cflag & CMSPAR) {
++ if (termios->c_cflag & PARODD) {
++ /* Set mark parity if PARODD and CMSPAR. */
++ tx_ctrl.par = regk_ser_mark;
++ rx_ctrl.par = regk_ser_mark;
++ } else {
++ tx_ctrl.par = regk_ser_space;
++ rx_ctrl.par = regk_ser_space;
++ }
++ } else {
++ if (termios->c_cflag & PARODD) {
++ /* Set odd parity. */
++ tx_ctrl.par = regk_ser_odd;
++ rx_ctrl.par = regk_ser_odd;
++ }
++ }
++
++ if (termios->c_cflag & CRTSCTS) {
++ /* Enable automatic CTS handling. */
++ tx_ctrl.auto_cts = regk_ser_yes;
++ }
++
++ /* Make sure the tx and rx are enabled. */
++ tx_ctrl.en = regk_ser_yes;
++ rx_ctrl.en = regk_ser_yes;
++
++ /*
++ * Wait for tr_idle in case a character is being output, so it won't
++ * be damaged by the changes we do below. It seems the termios
++ * changes "sometimes" (we can't see e.g. a tcsetattr TCSANOW
++ * parameter here) should take place no matter what state. However,
++ * in case we should wait, we may have a non-empty transmitter state
++ * as we tell the upper layers that we're all done when we've passed
++ * characters to the hardware, but we don't wait for them being
++ * actually shifted out.
++ */
++ spin_lock_irqsave(&port->lock, flags);
++
++ /*
++ * None of our interrupts re-enable DMA, so it's thankfully ok to
++ * disable it once, outside the loop.
++ */
++ tx_dma_en.en = 0;
++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);
++ do {
++ /*
++ * Make sure we have integrity between the read r_stat status
++ * and us writing the registers below, but don't busy-wait
++ * with interrupts off. We need to keep the port lock though
++ * (if we go SMP), so nobody else writes characters.
++ */
++ local_irq_restore(flags);
++ local_irq_save(flags);
++ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
++ } while (!rstat.tr_idle);
++
++ /* Actually write the control regs (if modified) to the hardware. */
++
++ uart_update_timeout(port, termios->c_cflag, port->uartclk/8);
++ MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div);
++ MODIFY_REG(up->regi_ser, rw_rec_ctrl, rx_ctrl);
++
++ MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div);
++ MODIFY_REG(up->regi_ser, rw_tr_ctrl, tx_ctrl);
++
++ tx_dma_en.en = up->regi_dmaout != 0;
++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);
++
++ xoff = REG_RD(ser, up->regi_ser, rw_xoff);
++
++ if (up->port.state && up->port.state->port.tty &&
++ (termios->c_iflag & IXON)) {
++ xoff.chr = STOP_CHAR(up->port.state->port.tty);
++ xoff.automatic = regk_ser_yes;
++ } else
++ xoff.automatic = regk_ser_no;
++
++ MODIFY_REG(up->regi_ser, rw_xoff, xoff);
++
++ /*
++ * Make sure we don't start in an automatically shut-off state due to
++ * a previous early exit.
++ */
++ xoff_clr.clr = 1;
++ REG_WR(ser, up->regi_ser, rw_xoff_clr, xoff_clr);
++
++ serial_cris_set_mctrl(&up->port, up->port.mctrl);
++ spin_unlock_irqrestore(&up->port.lock, flags);
++}
++
++static const char *
++serial_cris_type(struct uart_port *port)
++{
++ return "CRISv32";
++}
++
++static void serial_cris_release_port(struct uart_port *port)
++{
++}
++
++static int serial_cris_request_port(struct uart_port *port)
++{
++ return 0;
++}
++
++static void serial_cris_config_port(struct uart_port *port, int flags)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ up->port.type = PORT_CRIS;
++}
++
++#if defined(CONFIG_ETRAX_RS485)
++
++static void cris_set_rs485_mode(struct uart_cris_port* up) {
++ reg_ser_rw_tr_ctrl tr_ctrl;
++ reg_ser_rw_rec_ctrl rec_ctrl;
++ reg_scope_instances regi_ser = up->regi_ser;
++
++ if (up->port_type == TYPE_485FD)
++ /* We do not want to change anything if we are in 485FD mode */
++ return;
++
++ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
++ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
++
++ /* Set port in RS-485 mode */
++ if (up->rs485.enabled) {
++ tr_ctrl.auto_rts = regk_ser_yes;
++ rec_ctrl.rts_n = up->rs485.rts_after_sent ?
++ regk_ser_active : regk_ser_inactive;
++ }
++ /* Set port to RS-232 mode */
++ else {
++ rec_ctrl.rts_n = regk_ser_inactive;
++ tr_ctrl.auto_rts = regk_ser_no;
++ rec_ctrl.half_duplex = regk_ser_no;
++ }
++
++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
++ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
++}
++
++/* Enable/disable RS-485 mode on selected port. */
++static int
++cris_enable_rs485(struct uart_cris_port* up, struct rs485_control *r)
++{
++ if (up->port_type == TYPE_485FD)
++ /* Port in 485FD mode can not chage mode */
++ goto out;
++
++ up->rs485.enabled = 0x1 & r->enabled;
++ up->rs485.rts_on_send = 0x01 & r->rts_on_send;
++ up->rs485.rts_after_sent = 0x01 & r->rts_after_sent;
++ up->rs485.delay_rts_before_send = r->delay_rts_before_send;
++
++ cris_set_rs485_mode(up);
++ out:
++ return 0;
++}
++
++
++/* Enable RS485 mode on port and send the data. Port will stay
++ * in 485 mode after the data has been sent.
++ */
++static int
++cris_write_rs485(struct uart_cris_port *up, const unsigned char* buf, int count)
++{
++ up->rs485.enabled = 1;
++
++ /* Set the port in RS485 mode */
++ cris_set_rs485_mode(up);
++
++ /* Send the data */
++ count = serial_cris_driver.tty_driver->ops->write(up->port.state->port.tty, buf, count);
++
++ return count;
++}
++
++#endif /* CONFIG_ETRAX_RS485 */
++
++static int serial_cris_ioctl(struct uart_port *port, unsigned int cmd,
++ unsigned long arg)
++{
++#if defined(CONFIG_ETRAX_RS485)
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++
++ switch (cmd) {
++ case TIOCSRS485: {
++ struct serial_rs485 in;
++ struct rs485_control rs485ctrl;
++ if (copy_from_user(&in, (struct serial_rs485 *)cmd,
++ sizeof(rs485ctrl)))
++ return -EFAULT;
++ rs485ctrl.rts_on_send = in.flags & SER_RS485_RTS_ON_SEND;
++ rs485ctrl.rts_after_sent = in.flags & SER_RS485_RTS_AFTER_SEND;
++ rs485ctrl.enabled = in.flags & SER_RS485_ENABLED;
++ rs485ctrl.delay_rts_before_send = in.delay_rts_before_send;
++
++ return cris_enable_rs485(up, &rs485ctrl);
++ }
++
++ case TIOCSERSETRS485: {
++ struct rs485_control rs485ctrl;
++ if (copy_from_user(&rs485ctrl, (struct rs485_control*) arg,
++ sizeof(rs485ctrl)))
++ return -EFAULT;
++
++ return cris_enable_rs485(up, &rs485ctrl);
++ }
++
++ case TIOCSERWRRS485: {
++ struct rs485_write rs485wr;
++ if (copy_from_user(&rs485wr, (struct rs485_write*)arg,
++ sizeof(rs485wr)))
++ return -EFAULT;
++
++ return cris_write_rs485(up, rs485wr.outc, rs485wr.outc_size);
++ }
++
++ case TIOCSERSETRS485FD: {
++ reg_scope_instances regi_ser = up->regi_ser;
++ reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
++
++ if (arg)
++ rec_ctrl.half_duplex = regk_ser_no;
++ else
++ rec_ctrl.half_duplex = regk_ser_yes;
++
++ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
++ return 0;
++ }
++
++ case TIOCSERSETDIVISOR: {
++ reg_ser_rw_tr_baud_div tx_baud_div = {0};
++ reg_ser_rw_rec_baud_div rx_baud_div = {0};
++
++ /* divisor must be >= 8 */
++ if (arg < 8)
++ return -EINVAL;
++
++ tx_baud_div.div = arg;
++ rx_baud_div.div = tx_baud_div.div; /* same as tx. */
++
++ MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div);
++ MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div);
++
++ return 0;
++ }
++
++ default:
++ return -ENOIOCTLCMD;
++ }
++
++ return 0;
++#else
++ return -ENOIOCTLCMD;
++#endif
++}
++
++static const struct uart_ops serial_cris_pops = {
++ .tx_empty = serial_cris_tx_empty,
++ .set_mctrl = serial_cris_set_mctrl,
++ .get_mctrl = serial_cris_get_mctrl,
++ .stop_tx = serial_cris_stop_tx,
++ .start_tx = serial_cris_start_tx,
++ .send_xchar = serial_cris_send_xchar,
++ .stop_rx = serial_cris_stop_rx,
++ .enable_ms = serial_cris_enable_ms,
++ .break_ctl = serial_cris_break_ctl,
++ .startup = serial_cris_startup,
++ .shutdown = serial_cris_shutdown,
++ .set_termios = serial_cris_set_termios,
++ .type = serial_cris_type,
++ .release_port = serial_cris_release_port,
++ .request_port = serial_cris_request_port,
++ .config_port = serial_cris_config_port,
++ .ioctl = serial_cris_ioctl,
++#ifdef CONFIG_CONSOLE_POLL
++ .poll_get_char = serial_artpec_get_poll_char,
++ .poll_put_char = serial_artpec_put_poll_char,
++#endif
++};
++
++/*
++ * It's too easy to break CONFIG_ETRAX_DEBUG_PORT_NULL and the
++ * no-config choices by adding and moving code to before a necessary
++ * early exit in all functions for the special case of
++ * up->regi_ser == 0. This collection of dummy functions lets us
++ * avoid that. Maybe there should be a generic table of dummy serial
++ * functions?
++ */
++
++static unsigned int serial_cris_tx_empty_dummy(struct uart_port *port)
++{
++ return TIOCSER_TEMT;
++}
++
++static void serial_cris_set_mctrl_dummy(struct uart_port *port,
++ unsigned int mctrl)
++{
++}
++
++static unsigned int serial_cris_get_mctrl_dummy(struct uart_port *port)
++{
++ return 0;
++}
++
++static void serial_cris_stop_tx_dummy(struct uart_port *port)
++{
++}
++
++static void serial_cris_start_tx_dummy(struct uart_port *port)
++{
++ /* Discard outbound characters. */
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ struct circ_buf *xmit = &up->port.state->xmit;
++ xmit->tail = xmit->head;
++ uart_write_wakeup(port);
++}
++
++#define serial_cris_stop_rx_dummy serial_cris_stop_tx_dummy
++
++#define serial_cris_enable_ms_dummy serial_cris_stop_tx_dummy
++
++static void serial_cris_break_ctl_dummy(struct uart_port *port,
++ int break_state)
++{
++}
++
++static int serial_cris_startup_dummy(struct uart_port *port)
++{
++ return 0;
++}
++
++#define serial_cris_shutdown_dummy serial_cris_stop_tx_dummy
++
++static void
++serial_cris_set_termios_dummy(struct uart_port *port, struct ktermios *termios,
++ struct ktermios *old)
++{
++}
++
++#define serial_cris_release_port_dummy serial_cris_stop_tx_dummy
++#define serial_cris_request_port_dummy serial_cris_startup_dummy
++
++static const struct uart_ops serial_cris_dummy_pops = {
++ /*
++ * We *could* save one or two of those with different
++ * signature by casting and knowledge of the ABI, but it's
++ * just not worth the maintenance headache.
++ * For the ones we don't define here, the default (usually meaning
++ * "unimplemented") makes sense.
++ */
++ .tx_empty = serial_cris_tx_empty_dummy,
++ .set_mctrl = serial_cris_set_mctrl_dummy,
++ .get_mctrl = serial_cris_get_mctrl_dummy,
++ .stop_tx = serial_cris_stop_tx_dummy,
++ .start_tx = serial_cris_start_tx_dummy,
++ .stop_rx = serial_cris_stop_rx_dummy,
++ .enable_ms = serial_cris_enable_ms_dummy,
++ .break_ctl = serial_cris_break_ctl_dummy,
++ .startup = serial_cris_startup_dummy,
++ .shutdown = serial_cris_shutdown_dummy,
++ .set_termios = serial_cris_set_termios_dummy,
++
++ /* This one we keep the same. */
++ .type = serial_cris_type,
++
++ .release_port = serial_cris_release_port_dummy,
++ .request_port = serial_cris_request_port_dummy,
++
++ /*
++ * This one we keep the same too, as long as it doesn't do
++ * anything else but to set the type.
++ */
++ .config_port = serial_cris_config_port,
++};
++
++static void cris_serial_port_init(struct uart_port *port, int line)
++{
++ struct uart_cris_port *up = (struct uart_cris_port *)port;
++ static int first = 1;
++
++ if (up->initialized)
++ return;
++ up->initialized = 1;
++ port->line = line;
++ spin_lock_init(&port->lock);
++ port->ops =
++ up->regi_ser == 0 ? &serial_cris_dummy_pops :
++ &serial_cris_pops;
++ port->irq = up->irq;
++ port->iobase = up->regi_ser ? up->regi_ser : 1;
++ port->uartclk = 29493000;
++
++ /*
++ * We can't fit any more than 255 here (unsigned char), though
++ * actually UART_XMIT_SIZE characters could be pending output (if it
++ * wasn't for the single test in transmit_chars_dma). At time of this
++ * writing, the definition of "fifosize" is here the amount of
++ * characters that can be pending output after a start_tx call until
++ * tx_empty returns 1: see serial_core.c:uart_wait_until_sent. This
++ * matters for timeout calculations unfortunately, but keeping larger
++ * amounts at the DMA wouldn't win much so let's just play nice.
++ */
++ port->fifosize = 255;
++ port->flags = UPF_BOOT_AUTOCONF;
++
++#ifdef CONFIG_ETRAX_RS485
++ /* Set sane defaults. */
++ up->rs485.rts_on_send = 0;
++ up->rs485.rts_after_sent = 1;
++ up->rs485.delay_rts_before_send = 0;
++ if (up->port_type > TYPE_232)
++ up->rs485.enabled = 1;
++ else
++ up->rs485.enabled = 0;
++#endif
++
++ if (first) {
++ first = 0;
++#ifdef CONFIG_ETRAX_SERIAL_PORT0
++ SETUP_PINS(0);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT1
++ SETUP_PINS(1);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT2
++ SETUP_PINS(2);
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT3
++ SETUP_PINS(3);
++#endif
++ }
++}
++
++static int __init serial_cris_init(void)
++{
++ int ret, i;
++ printk(KERN_INFO "Serial: CRISv32 driver $Revision: 1.109 $ ");
++
++ ret = uart_register_driver(&serial_cris_driver);
++ if (ret)
++ goto out;
++
++ for (i = 0; i < UART_NR; i++) {
++ if (serial_cris_ports[i].used) {
++ struct uart_port *port;
++#ifdef CONFIG_ETRAX_RS485
++ reg_ser_rw_rec_ctrl rec_ctrl;
++
++ /* Make sure that the RTS pin stays low when allocating
++ * pins for a port in 485 mode.
++ */
++ if (serial_cris_ports[i].port_type > TYPE_232) {
++ rec_ctrl = REG_RD(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl);
++ rec_ctrl.rts_n = regk_ser_active;
++ REG_WR(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl, rec_ctrl);
++ }
++#endif
++ switch (serial_cris_ports[i].regi_ser) {
++ case regi_ser0:
++ break;
++ case regi_ser1:
++ if (crisv32_pinmux_alloc_fixed(pinmux_ser1)) {
++ printk("Failed to allocate pins for ser1, disable port\n");
++ serial_cris_ports[i].used = 0;
++ continue;
++ }
++ break;
++ case regi_ser2:
++ if (crisv32_pinmux_alloc_fixed(pinmux_ser2)) {
++ printk("Failed to allocate pins for ser2, disable port\n");
++ serial_cris_ports[i].used = 0;
++ continue;
++ }
++ break;
++ case regi_ser3:
++ if (crisv32_pinmux_alloc_fixed(pinmux_ser3)) {
++ printk("Failed to allocate pins for ser3, disable port\n");
++ serial_cris_ports[i].used = 0;
++ continue;
++ }
++ break;
++#if CONFIG_ETRAX_SERIAL_PORTS == 5
++ case regi_ser4:
++ if (crisv32_pinmux_alloc_fixed(pinmux_ser4)) {
++ printk("Failed to allocate pins for ser4, disable port\n");
++ serial_cris_ports[i].used = 0;
++ continue;
++ }
++ break;
++#endif
++ default:
++ printk("Error: No such serial port (%d) \n", serial_cris_ports[i].regi_ser);
++ serial_cris_ports[i].used = 0;
++ break;
++ }
++
++ port = &serial_cris_ports[i].port;
++ cris_console.index = i;
++ cris_serial_port_init(port, i);
++ uart_add_one_port(&serial_cris_driver, port);
++ }
++ }
++
++out:
++ return ret;
++}
++
++static void __exit serial_cris_exit(void)
++{
++ int i;
++ for (i = 0; i < UART_NR; i++)
++ if (serial_cris_ports[i].used) {
++ switch (serial_cris_ports[i].regi_ser) {
++ case regi_ser1:
++ crisv32_pinmux_dealloc_fixed(pinmux_ser1);
++ break;
++ case regi_ser2:
++ crisv32_pinmux_dealloc_fixed(pinmux_ser2);
++ break;
++ case regi_ser3:
++ crisv32_pinmux_dealloc_fixed(pinmux_ser3);
++ break;
++#if CONFIG_ETRAX_SERIAL_PORTS == 5
++ case regi_ser4:
++ crisv32_pinmux_dealloc_fixed(pinmux_ser4);
++ break;
++#endif
++ default:
++ printk("Error: No such serial port (%d) \n", serial_cris_ports[i].regi_ser);
++ serial_cris_ports[i].used = 0;
++ break;
++ }
++ uart_remove_one_port(&serial_cris_driver,
++ &serial_cris_ports[i].port);
++ }
++ uart_unregister_driver(&serial_cris_driver);
++}
++
++module_init(serial_cris_init);
++module_exit(serial_cris_exit);
+diff -Nur linux-4.0.3.orig/drivers/tty/serial/Makefile linux-4.0.3/drivers/tty/serial/Makefile
+--- linux-4.0.3.orig/drivers/tty/serial/Makefile 2015-05-13 14:14:53.000000000 +0200
++++ linux-4.0.3/drivers/tty/serial/Makefile 2015-05-25 17:21:47.000000000 +0200
+@@ -51,6 +51,7 @@
+ obj-$(CONFIG_SERIAL_MESON) += meson_uart.o
+ obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
+ obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
++obj-$(CONFIG_ETRAXFS_SERIAL) += crisv32.o
+ obj-$(CONFIG_SERIAL_ETRAXFS) += etraxfs-uart.o
+ obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
+ obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o
+diff -Nur linux-4.0.3.orig/include/uapi/linux/serial_core.h linux-4.0.3/include/uapi/linux/serial_core.h
+--- linux-4.0.3.orig/include/uapi/linux/serial_core.h 2015-05-13 14:14:53.000000000 +0200
++++ linux-4.0.3/include/uapi/linux/serial_core.h 2015-05-25 17:20:56.000000000 +0200
+@@ -258,4 +258,7 @@
+ /* Cris v10 / v32 SoC */
+ #define PORT_CRIS 112
+
++/* Cris v10 / v32 SoC */
++#define PORT_CRIS 109
++
+ #endif /* _UAPILINUX_SERIAL_CORE_H */