diff options
Diffstat (limited to 'target/foxboard/patches/cris.patch')
| -rw-r--r-- | target/foxboard/patches/cris.patch | 309 |
1 files changed, 128 insertions, 181 deletions
diff --git a/target/foxboard/patches/cris.patch b/target/foxboard/patches/cris.patch index 44080f353..0fefa318c 100644 --- a/target/foxboard/patches/cris.patch +++ b/target/foxboard/patches/cris.patch @@ -1,6 +1,59 @@ -diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.35.7/arch/cris/arch-v10/drivers/axisflashmap.c ---- linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/arch-v10/drivers/axisflashmap.c 2010-10-14 18:50:17.226851039 +0200 +diff -Nur linux-2.6.36.orig/arch/cris/Kconfig linux-2.6.36/arch/cris/Kconfig +--- linux-2.6.36.orig/arch/cris/Kconfig 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/arch/cris/Kconfig 2010-11-15 17:57:17.000000000 +0100 +@@ -177,6 +177,12 @@ + help + Size of DRAM (decimal in MB) typically 2, 8 or 16. + ++config ETRAX_MTD_SIZE ++ hex "MTD size (hex)" ++ default "0x00800000" ++ help ++ Size of MTD device typically 4 or 8 MB. ++ + config ETRAX_VMEM_SIZE + int "Video memory size (dec, in MB)" + depends on ETRAX_ARCH_V32 && !ETRAXFS +@@ -282,7 +288,7 @@ + select MTD_CFI_AMDSTD + select MTD_JEDECPROBE if ETRAX_ARCH_V32 + select MTD_CHAR +- select MTD_BLOCK ++ select MTD_BLOCK_RO + select MTD_PARTITIONS + select MTD_CONCAT + select MTD_COMPLEX_MAPPINGS +@@ -671,6 +677,11 @@ + + source "drivers/ide/Kconfig" + ++#mysteriously part of this standard linux driver was removed from cris build! - info@crisos.org ++source "drivers/scsi/Kconfig" ++ ++source "drivers/media/Kconfig" ++ + source "drivers/net/Kconfig" + + source "drivers/i2c/Kconfig" +diff -Nur linux-2.6.36.orig/arch/cris/Makefile linux-2.6.36/arch/cris/Makefile +--- linux-2.6.36.orig/arch/cris/Makefile 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/arch/cris/Makefile 2010-11-15 17:57:17.000000000 +0100 +@@ -40,10 +40,10 @@ + + LD = $(CROSS_COMPILE)ld -mcrislinux + +-OBJCOPYFLAGS := -O binary -R .note -R .comment -S ++OBJCOPYFLAGS := -O binary -R .bss -R .note -R .note.gnu.build-id -R .comment -S + + KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc) +-KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc) ++KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe -fno-peephole2 $(inc) + KBUILD_CPPFLAGS += $(inc) + + ifdef CONFIG_FRAME_POINTER +diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.36/arch/cris/arch-v10/drivers/axisflashmap.c +--- linux-2.6.36.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/arch/cris/arch-v10/drivers/axisflashmap.c 2010-11-15 17:57:17.000000000 +0100 @@ -113,7 +113,7 @@ /* If no partition-table was found, we use this default-set. */ @@ -146,9 +199,9 @@ diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2. return err; } -diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.35.7/arch/cris/arch-v10/drivers/ds1302.c ---- linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/ds1302.c 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/arch-v10/drivers/ds1302.c 2010-10-14 18:50:17.256851069 +0200 +diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.36/arch/cris/arch-v10/drivers/ds1302.c +--- linux-2.6.36.orig/arch/cris/arch-v10/drivers/ds1302.c 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/arch/cris/arch-v10/drivers/ds1302.c 2010-11-15 17:57:17.000000000 +0100 @@ -22,6 +22,7 @@ #include <linux/smp_lock.h> #include <linux/bcd.h> @@ -181,10 +234,10 @@ diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.35.7 return 0; } -diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.35.7/arch/cris/arch-v10/drivers/gpio.c ---- linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/gpio.c 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/arch-v10/drivers/gpio.c 2010-10-14 18:50:17.298091976 +0200 -@@ -21,6 +21,7 @@ +diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.36/arch/cris/arch-v10/drivers/gpio.c +--- linux-2.6.36.orig/arch/cris/arch-v10/drivers/gpio.c 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/arch/cris/arch-v10/drivers/gpio.c 2010-11-15 17:57:17.000000000 +0100 +@@ -20,6 +20,7 @@ #include <linux/poll.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -192,7 +245,7 @@ diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.35.7/a #include <asm/etraxgpio.h> #include <arch/svinto.h> -@@ -771,6 +772,10 @@ +@@ -797,6 +798,10 @@ /* main driver initialization routine, called from mem.c */ @@ -203,7 +256,7 @@ diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.35.7/a static int __init gpio_init(void) { int res; -@@ -784,6 +789,13 @@ +@@ -810,6 +815,13 @@ return res; } @@ -217,18 +270,18 @@ diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.35.7/a /* Clear all leds */ #if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS) CRIS_LED_NETWORK_SET(0); -diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/lib/hw_settings.S linux-2.6.35.7/arch/cris/arch-v10/lib/hw_settings.S ---- linux-2.6.35.7.orig/arch/cris/arch-v10/lib/hw_settings.S 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/arch-v10/lib/hw_settings.S 2010-10-14 18:50:17.338092197 +0200 +diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/lib/hw_settings.S linux-2.6.36/arch/cris/arch-v10/lib/hw_settings.S +--- linux-2.6.36.orig/arch/cris/arch-v10/lib/hw_settings.S 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/arch/cris/arch-v10/lib/hw_settings.S 2010-11-15 17:57:17.000000000 +0100 @@ -58,3 +58,5 @@ .dword R_PORT_PB_SET .dword PB_SET_VALUE .dword 0 ; No more register values + .ascii "ACME_PART_MAGIC" + .dword 0xdeadc0de -diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/mm/init.c linux-2.6.35.7/arch/cris/arch-v10/mm/init.c ---- linux-2.6.35.7.orig/arch/cris/arch-v10/mm/init.c 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/arch-v10/mm/init.c 2010-10-14 18:50:17.378091957 +0200 +diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/mm/init.c linux-2.6.36/arch/cris/arch-v10/mm/init.c +--- linux-2.6.36.orig/arch/cris/arch-v10/mm/init.c 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/arch/cris/arch-v10/mm/init.c 2010-11-15 17:57:17.000000000 +0100 @@ -184,6 +184,9 @@ free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0); @@ -239,77 +292,12 @@ diff -Nur linux-2.6.35.7.orig/arch/cris/arch-v10/mm/init.c linux-2.6.35.7/arch/c /* Initialize remaps of some I/O-ports. It is important that this * is called before any driver is initialized. -diff -Nur linux-2.6.35.7.orig/arch/cris/boot/compressed/Makefile linux-2.6.35.7/arch/cris/boot/compressed/Makefile ---- linux-2.6.35.7.orig/arch/cris/boot/compressed/Makefile 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/boot/compressed/Makefile 2010-10-14 18:50:17.418092209 +0200 -@@ -18,7 +18,7 @@ - OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o - OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o - OBJECTS= $(OBJECTS-y) $(obj)/misc.o --OBJCOPYFLAGS = -O binary --remove-section=.bss -+#OBJCOPYFLAGS = -O binary --remove-section=.bss - - quiet_cmd_image = BUILD $@ - cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ -diff -Nur linux-2.6.35.7.orig/arch/cris/boot/compressed/misc.c linux-2.6.35.7/arch/cris/boot/compressed/misc.c ---- linux-2.6.35.7.orig/arch/cris/boot/compressed/misc.c 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/boot/compressed/misc.c 2010-10-14 18:50:17.448101099 +0200 -@@ -106,7 +106,7 @@ - - static void flush_window(void); - static void error(char *m); --static void puts(const char *); -+static void putstr(const char *); - - extern char *input_data; /* lives in head.S */ - -@@ -139,7 +139,7 @@ - } - #endif - --static void puts(const char *s) -+static void putstr(const char *s) - { - #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL - while (*s) { -@@ -233,9 +233,9 @@ - - static void error(char *x) - { -- puts("\n\n"); -- puts(x); -- puts("\n\n -- System halted\n"); -+ putstr("\n\n"); -+ putstr(x); -+ putstr("\n\n -- System halted\n"); - - while(1); /* Halt */ - } -@@ -378,14 +378,14 @@ - __asm__ volatile ("move $vr,%0" : "=rm" (revision)); - if (revision < compile_rev) { - #ifdef CONFIG_ETRAX_ARCH_V32 -- puts("You need an ETRAX FS to run Linux 2.6/crisv32\n"); -+ putstr("You need an ETRAX FS to run Linux 2.6/crisv32\n"); - #else -- puts("You need an ETRAX 100LX to run linux 2.6\n"); -+ putstr("You need an ETRAX 100LX to run linux 2.6\n"); - #endif - while(1); - } - -- puts("Uncompressing Linux...\n"); -+ putstr("Uncompressing Linux...\n"); - gunzip(); -- puts("Done. Now booting the kernel\n"); -+ putstr("Done. Now booting the kernel\n"); - } -diff -Nur linux-2.6.35.7.orig/arch/cris/boot/Makefile linux-2.6.35.7/arch/cris/boot/Makefile ---- linux-2.6.35.7.orig/arch/cris/boot/Makefile 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/boot/Makefile 2010-10-14 18:50:17.494356449 +0200 +diff -Nur linux-2.6.36.orig/arch/cris/boot/Makefile linux-2.6.36/arch/cris/boot/Makefile +--- linux-2.6.36.orig/arch/cris/boot/Makefile 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/arch/cris/boot/Makefile 2010-11-15 17:57:17.000000000 +0100 @@ -5,7 +5,7 @@ objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment - objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss + objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss --remove-section=.note.gnu.build-id -OBJCOPYFLAGS = -O binary $(objcopyflags-y) +#OBJCOPYFLAGS = -O binary $(objcopyflags-y) @@ -324,63 +312,22 @@ diff -Nur linux-2.6.35.7.orig/arch/cris/boot/Makefile linux-2.6.35.7/arch/cris/b $(obj)/zImage: $(obj)/compressed/vmlinux @cp $< $@ -diff -Nur linux-2.6.35.7.orig/arch/cris/Kconfig linux-2.6.35.7/arch/cris/Kconfig ---- linux-2.6.35.7.orig/arch/cris/Kconfig 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/Kconfig 2010-10-14 18:50:17.535601072 +0200 -@@ -177,6 +177,12 @@ - help - Size of DRAM (decimal in MB) typically 2, 8 or 16. - -+config ETRAX_MTD_SIZE -+ hex "MTD size (hex)" -+ default "0x00800000" -+ help -+ Size of MTD device typically 4 or 8 MB. -+ - config ETRAX_VMEM_SIZE - int "Video memory size (dec, in MB)" - depends on ETRAX_ARCH_V32 && !ETRAXFS -@@ -282,7 +288,7 @@ - select MTD_CFI_AMDSTD - select MTD_JEDECPROBE if ETRAX_ARCH_V32 - select MTD_CHAR -- select MTD_BLOCK -+ select MTD_BLOCK_RO - select MTD_PARTITIONS - select MTD_CONCAT - select MTD_COMPLEX_MAPPINGS -@@ -671,6 +677,11 @@ - - source "drivers/ide/Kconfig" - -+#mysteriously part of this standard linux driver was removed from cris build! - info@crisos.org -+source "drivers/scsi/Kconfig" -+ -+source "drivers/media/Kconfig" -+ - source "drivers/net/Kconfig" - - source "drivers/i2c/Kconfig" -diff -Nur linux-2.6.35.7.orig/arch/cris/Makefile linux-2.6.35.7/arch/cris/Makefile ---- linux-2.6.35.7.orig/arch/cris/Makefile 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/arch/cris/Makefile 2010-10-14 18:50:17.588101050 +0200 -@@ -40,10 +40,10 @@ - - LD = $(CROSS_COMPILE)ld -mcrislinux - --OBJCOPYFLAGS := -O binary -R .note -R .comment -S -+OBJCOPYFLAGS := -O binary -R .bss -R .note -R .note.gnu.build-id -R .comment -S - - KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc) --KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc) -+KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe -fno-peephole2 $(inc) - KBUILD_CPPFLAGS += $(inc) +diff -Nur linux-2.6.36.orig/arch/cris/boot/compressed/Makefile linux-2.6.36/arch/cris/boot/compressed/Makefile +--- linux-2.6.36.orig/arch/cris/boot/compressed/Makefile 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/arch/cris/boot/compressed/Makefile 2010-11-15 17:57:17.000000000 +0100 +@@ -18,7 +18,7 @@ + OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o + OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o + OBJECTS= $(OBJECTS-y) $(obj)/misc.o +-OBJCOPYFLAGS = -O binary --remove-section=.bss ++#OBJCOPYFLAGS = -O binary --remove-section=.bss - ifdef CONFIG_FRAME_POINTER -diff -Nur linux-2.6.35.7.orig/drivers/net/cris/eth_v10.c linux-2.6.35.7/drivers/net/cris/eth_v10.c ---- linux-2.6.35.7.orig/drivers/net/cris/eth_v10.c 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/drivers/net/cris/eth_v10.c 2010-10-14 18:50:17.634351377 +0200 -@@ -1722,7 +1722,7 @@ + quiet_cmd_image = BUILD $@ + cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ +diff -Nur linux-2.6.36.orig/drivers/net/cris/eth_v10.c linux-2.6.36/drivers/net/cris/eth_v10.c +--- linux-2.6.36.orig/drivers/net/cris/eth_v10.c 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/drivers/net/cris/eth_v10.c 2010-11-15 17:57:17.000000000 +0100 +@@ -1718,7 +1718,7 @@ static void e100_netpoll(struct net_device* netdev) { @@ -389,9 +336,9 @@ diff -Nur linux-2.6.35.7.orig/drivers/net/cris/eth_v10.c linux-2.6.35.7/drivers/ } #endif -diff -Nur linux-2.6.35.7.orig/drivers/serial/crisv10.c linux-2.6.35.7/drivers/serial/crisv10.c ---- linux-2.6.35.7.orig/drivers/serial/crisv10.c 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/drivers/serial/crisv10.c 2010-10-14 18:50:17.678091999 +0200 +diff -Nur linux-2.6.36.orig/drivers/serial/crisv10.c linux-2.6.36/drivers/serial/crisv10.c +--- linux-2.6.36.orig/drivers/serial/crisv10.c 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/drivers/serial/crisv10.c 2010-11-15 17:57:17.000000000 +0100 @@ -13,6 +13,7 @@ #include <linux/errno.h> #include <linux/signal.h> @@ -408,7 +355,7 @@ diff -Nur linux-2.6.35.7.orig/drivers/serial/crisv10.c linux-2.6.35.7/drivers/se #include <linux/seq_file.h> #include <linux/delay.h> #include <linux/module.h> -@@ -4415,6 +4417,7 @@ +@@ -4426,6 +4428,7 @@ #endif }; @@ -416,7 +363,7 @@ diff -Nur linux-2.6.35.7.orig/drivers/serial/crisv10.c linux-2.6.35.7/drivers/se static int __init rs_init(void) { int i; -@@ -4548,6 +4551,24 @@ +@@ -4559,6 +4562,24 @@ #endif #endif /* CONFIG_SVINTO_SIM */ @@ -441,9 +388,30 @@ diff -Nur linux-2.6.35.7.orig/drivers/serial/crisv10.c linux-2.6.35.7/drivers/se return 0; } -diff -Nur linux-2.6.35.7.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.35.7/drivers/usb/host/hc-cris-dbg.h ---- linux-2.6.35.7.orig/drivers/usb/host/hc-cris-dbg.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.35.7/drivers/usb/host/hc-cris-dbg.h 2010-10-14 18:50:17.714356435 +0200 +diff -Nur linux-2.6.36.orig/drivers/usb/Makefile linux-2.6.36/drivers/usb/Makefile +--- linux-2.6.36.orig/drivers/usb/Makefile 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/drivers/usb/Makefile 2010-11-15 17:57:18.000000000 +0100 +@@ -21,6 +21,7 @@ + obj-$(CONFIG_USB_R8A66597_HCD) += host/ + obj-$(CONFIG_USB_HWA_HCD) += host/ + obj-$(CONFIG_USB_ISP1760_HCD) += host/ ++obj-$(CONFIG_ETRAX_USB_HOST) += host/ + obj-$(CONFIG_USB_IMX21_HCD) += host/ + + obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ +diff -Nur linux-2.6.36.orig/drivers/usb/host/Makefile linux-2.6.36/drivers/usb/host/Makefile +--- linux-2.6.36.orig/drivers/usb/host/Makefile 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/drivers/usb/host/Makefile 2010-11-15 17:57:18.000000000 +0100 +@@ -32,5 +32,6 @@ + obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o + obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o + obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o ++obj-$(CONFIG_ETRAX_USB_HOST) += hc-crisv10.o + obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o + +diff -Nur linux-2.6.36.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.36/drivers/usb/host/hc-cris-dbg.h +--- linux-2.6.36.orig/drivers/usb/host/hc-cris-dbg.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.36/drivers/usb/host/hc-cris-dbg.h 2010-11-15 17:57:17.000000000 +0100 @@ -0,0 +1,146 @@ + +/* macros for debug output */ @@ -591,9 +559,9 @@ diff -Nur linux-2.6.35.7.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.35.7/driv + }; \ + s; \ + }) -diff -Nur linux-2.6.35.7.orig/drivers/usb/host/hc-crisv10.c linux-2.6.35.7/drivers/usb/host/hc-crisv10.c ---- linux-2.6.35.7.orig/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.35.7/drivers/usb/host/hc-crisv10.c 2010-10-14 19:04:20.676850954 +0200 +diff -Nur linux-2.6.36.orig/drivers/usb/host/hc-crisv10.c linux-2.6.36/drivers/usb/host/hc-crisv10.c +--- linux-2.6.36.orig/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.36/drivers/usb/host/hc-crisv10.c 2010-11-15 17:57:18.000000000 +0100 @@ -0,0 +1,4801 @@ +/* + * @@ -5396,9 +5364,9 @@ diff -Nur linux-2.6.35.7.orig/drivers/usb/host/hc-crisv10.c linux-2.6.35.7/drive +/* Module hooks */ +module_init(module_hcd_init); +module_exit(module_hcd_exit); -diff -Nur linux-2.6.35.7.orig/drivers/usb/host/hc-crisv10.h linux-2.6.35.7/drivers/usb/host/hc-crisv10.h ---- linux-2.6.35.7.orig/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.35.7/drivers/usb/host/hc-crisv10.h 2010-10-14 18:50:17.858091974 +0200 +diff -Nur linux-2.6.36.orig/drivers/usb/host/hc-crisv10.h linux-2.6.36/drivers/usb/host/hc-crisv10.h +--- linux-2.6.36.orig/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.36/drivers/usb/host/hc-crisv10.h 2010-11-15 17:57:18.000000000 +0100 @@ -0,0 +1,331 @@ +#ifndef __LINUX_ETRAX_USB_H +#define __LINUX_ETRAX_USB_H @@ -5731,30 +5699,9 @@ diff -Nur linux-2.6.35.7.orig/drivers/usb/host/hc-crisv10.h linux-2.6.35.7/drive +#define USB_SB_command__full__yes 1 + +#endif -diff -Nur linux-2.6.35.7.orig/drivers/usb/host/Makefile linux-2.6.35.7/drivers/usb/host/Makefile ---- linux-2.6.35.7.orig/drivers/usb/host/Makefile 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/drivers/usb/host/Makefile 2010-10-14 18:50:17.898091962 +0200 -@@ -32,5 +32,6 @@ - obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o - obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o - obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o -+obj-$(CONFIG_ETRAX_USB_HOST) += hc-crisv10.o - obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o - -diff -Nur linux-2.6.35.7.orig/drivers/usb/Makefile linux-2.6.35.7/drivers/usb/Makefile ---- linux-2.6.35.7.orig/drivers/usb/Makefile 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/drivers/usb/Makefile 2010-10-14 18:50:17.934371277 +0200 -@@ -21,6 +21,7 @@ - obj-$(CONFIG_USB_R8A66597_HCD) += host/ - obj-$(CONFIG_USB_HWA_HCD) += host/ - obj-$(CONFIG_USB_ISP1760_HCD) += host/ -+obj-$(CONFIG_ETRAX_USB_HOST) += host/ - obj-$(CONFIG_USB_IMX21_HCD) += host/ - - obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ -diff -Nur linux-2.6.35.7.orig/lib/klist.c linux-2.6.35.7/lib/klist.c ---- linux-2.6.35.7.orig/lib/klist.c 2010-09-29 03:09:08.000000000 +0200 -+++ linux-2.6.35.7/lib/klist.c 2010-10-14 18:50:17.978091963 +0200 +diff -Nur linux-2.6.36.orig/lib/klist.c linux-2.6.36/lib/klist.c +--- linux-2.6.36.orig/lib/klist.c 2010-10-20 22:30:22.000000000 +0200 ++++ linux-2.6.36/lib/klist.c 2010-11-15 17:57:18.000000000 +0100 @@ -60,7 +60,7 @@ { knode->n_klist = klist; |