summaryrefslogtreecommitdiff
path: root/target/cris/patches/cris.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/cris/patches/cris.patch')
-rw-r--r--target/cris/patches/cris.patch5713
1 files changed, 5713 insertions, 0 deletions
diff --git a/target/cris/patches/cris.patch b/target/cris/patches/cris.patch
new file mode 100644
index 000000000..0fefa318c
--- /dev/null
+++ b/target/cris/patches/cris.patch
@@ -0,0 +1,5713 @@
+diff -Nur linux-2.6.36.orig/arch/cris/Kconfig linux-2.6.36/arch/cris/Kconfig
+--- linux-2.6.36.orig/arch/cris/Kconfig 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/Kconfig 2010-11-15 17:57:17.000000000 +0100
+@@ -177,6 +177,12 @@
+ help
+ Size of DRAM (decimal in MB) typically 2, 8 or 16.
+
++config ETRAX_MTD_SIZE
++ hex "MTD size (hex)"
++ default "0x00800000"
++ help
++ Size of MTD device typically 4 or 8 MB.
++
+ config ETRAX_VMEM_SIZE
+ int "Video memory size (dec, in MB)"
+ depends on ETRAX_ARCH_V32 && !ETRAXFS
+@@ -282,7 +288,7 @@
+ select MTD_CFI_AMDSTD
+ select MTD_JEDECPROBE if ETRAX_ARCH_V32
+ select MTD_CHAR
+- select MTD_BLOCK
++ select MTD_BLOCK_RO
+ select MTD_PARTITIONS
+ select MTD_CONCAT
+ select MTD_COMPLEX_MAPPINGS
+@@ -671,6 +677,11 @@
+
+ source "drivers/ide/Kconfig"
+
++#mysteriously part of this standard linux driver was removed from cris build! - info@crisos.org
++source "drivers/scsi/Kconfig"
++
++source "drivers/media/Kconfig"
++
+ source "drivers/net/Kconfig"
+
+ source "drivers/i2c/Kconfig"
+diff -Nur linux-2.6.36.orig/arch/cris/Makefile linux-2.6.36/arch/cris/Makefile
+--- linux-2.6.36.orig/arch/cris/Makefile 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/Makefile 2010-11-15 17:57:17.000000000 +0100
+@@ -40,10 +40,10 @@
+
+ LD = $(CROSS_COMPILE)ld -mcrislinux
+
+-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
++OBJCOPYFLAGS := -O binary -R .bss -R .note -R .note.gnu.build-id -R .comment -S
+
+ KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc)
+-KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc)
++KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe -fno-peephole2 $(inc)
+ KBUILD_CPPFLAGS += $(inc)
+
+ ifdef CONFIG_FRAME_POINTER
+diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.36/arch/cris/arch-v10/drivers/axisflashmap.c
+--- linux-2.6.36.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/arch-v10/drivers/axisflashmap.c 2010-11-15 17:57:17.000000000 +0100
+@@ -113,7 +113,7 @@
+
+ /* If no partition-table was found, we use this default-set. */
+ #define MAX_PARTITIONS 7
+-#define NUM_DEFAULT_PARTITIONS 3
++#define NUM_DEFAULT_PARTITIONS 4
+
+ /*
+ * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
+@@ -122,19 +122,24 @@
+ */
+ static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
+ {
+- .name = "boot firmware",
+- .size = CONFIG_ETRAX_PTABLE_SECTOR,
++ .name = "kernel",
++ .size = 0x00,
+ .offset = 0
+ },
+ {
+- .name = "kernel",
+- .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
+- .offset = CONFIG_ETRAX_PTABLE_SECTOR
++ .name = "rootfs",
++ .size = 0x200000 ,
++ .offset = 0x200000
+ },
+ {
+- .name = "filesystem",
+- .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
+- .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
++ .name = "cfgfs",
++ .size = 0x20000 ,
++ .offset = CONFIG_ETRAX_MTD_SIZE - 0x20000
++ },
++ {
++ .name = "linux",
++ .size = CONFIG_ETRAX_MTD_SIZE - 0x20000,
++ .offset = 0
+ }
+ };
+
+@@ -281,6 +286,11 @@
+ struct partitiontable_entry *ptable;
+ int use_default_ptable = 1; /* Until proven otherwise. */
+ const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n";
++ unsigned int kernel_part_size = 0;
++ unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR);
++ unsigned int flash_scan_count = 0;
++ const char *part_magic = "ACME_PART_MAGIC";
++ unsigned int magic_len = strlen(part_magic);
+
+ if (!(mymtd = flash_probe())) {
+ /* There's no reason to use this module if no flash chip can
+@@ -292,6 +302,31 @@
+ mymtd->name, mymtd->size);
+ axisflash_mtd = mymtd;
+ }
++ /* scan flash to findout where out partition starts */
++
++ printk(KERN_INFO "Scanning flash for end of kernel magic\n");
++ for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++){
++ if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0)
++ {
++ kernel_part_size = flash_mem[flash_scan_count + magic_len ];
++ kernel_part_size <<= 8;
++ kernel_part_size += flash_mem[flash_scan_count + magic_len + 2];
++ kernel_part_size <<= 8;
++ kernel_part_size += flash_mem[flash_scan_count + magic_len + 1];
++ kernel_part_size <<= 8;
++ kernel_part_size += flash_mem[flash_scan_count + magic_len + 3];
++ printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size);
++ flash_scan_count = 1100000;
++ }
++ }
++
++
++ if(kernel_part_size){
++ kernel_part_size = (kernel_part_size & 0xffff0000);
++ axis_default_partitions[0].size = kernel_part_size;
++ axis_default_partitions[1].size = mymtd->size - axis_default_partitions[0].size - axis_default_partitions[2].size;
++ axis_default_partitions[1].offset = axis_default_partitions[0].size;
++ }
+
+ if (mymtd) {
+ mymtd->owner = THIS_MODULE;
+@@ -360,21 +395,6 @@
+ use_default_ptable = !ptable_ok;
+ }
+
+- if (romfs_in_flash) {
+- /* Add an overlapping device for the root partition (romfs). */
+-
+- axis_partitions[pidx].name = "romfs";
+- axis_partitions[pidx].size = romfs_length;
+- axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR;
+- axis_partitions[pidx].mask_flags |= MTD_WRITEABLE;
+-
+- printk(KERN_INFO
+- " Adding readonly flash partition for romfs image:\n");
+- printk(pmsg, pidx, axis_partitions[pidx].offset,
+- axis_partitions[pidx].size);
+- pidx++;
+- }
+-
+ #ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
+ if (mymtd) {
+ main_partition.size = mymtd->size;
+@@ -397,36 +417,6 @@
+ if (err)
+ panic("axisflashmap could not add MTD partitions!\n");
+ }
+-
+- if (!romfs_in_flash) {
+- /* Create an RAM device for the root partition (romfs). */
+-
+-#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0)
+- /* No use trying to boot this kernel from RAM. Panic! */
+- printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM "
+- "device due to kernel (mis)configuration!\n");
+- panic("This kernel cannot boot from RAM!\n");
+-#else
+- struct mtd_info *mtd_ram;
+-
+- mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+- if (!mtd_ram)
+- panic("axisflashmap couldn't allocate memory for "
+- "mtd_info!\n");
+-
+- printk(KERN_INFO " Adding RAM partition for romfs image:\n");
+- printk(pmsg, pidx, (unsigned)romfs_start,
+- (unsigned)romfs_length);
+-
+- err = mtdram_init_device(mtd_ram,
+- (void *)romfs_start,
+- romfs_length,
+- "romfs");
+- if (err)
+- panic("axisflashmap could not initialize MTD RAM "
+- "device!\n");
+-#endif
+- }
+ return err;
+ }
+
+diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.36/arch/cris/arch-v10/drivers/ds1302.c
+--- linux-2.6.36.orig/arch/cris/arch-v10/drivers/ds1302.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/arch-v10/drivers/ds1302.c 2010-11-15 17:57:17.000000000 +0100
+@@ -22,6 +22,7 @@
+ #include <linux/smp_lock.h>
+ #include <linux/bcd.h>
+ #include <linux/capability.h>
++#include <linux/device.h>
+
+ #include <asm/uaccess.h>
+ #include <asm/system.h>
+@@ -499,6 +500,10 @@
+ return 0;
+ }
+
++#ifdef CONFIG_SYSFS
++static struct class *rtc_class;
++#endif
++
+ static int __init ds1302_register(void)
+ {
+ ds1302_init();
+@@ -507,6 +512,12 @@
+ ds1302_name, RTC_MAJOR_NR);
+ return -1;
+ }
++ #ifdef CONFIG_SYSFS
++ rtc_class = class_create(THIS_MODULE, "rtc");
++ class_device_create(rtc_class, NULL, MKDEV(RTC_MAJOR_NR, 0),
++ NULL, "rtc");
++ #endif
++
+ return 0;
+
+ }
+diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.36/arch/cris/arch-v10/drivers/gpio.c
+--- linux-2.6.36.orig/arch/cris/arch-v10/drivers/gpio.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/arch-v10/drivers/gpio.c 2010-11-15 17:57:17.000000000 +0100
+@@ -20,6 +20,7 @@
+ #include <linux/poll.h>
+ #include <linux/init.h>
+ #include <linux/interrupt.h>
++#include <linux/device.h>
+
+ #include <asm/etraxgpio.h>
+ #include <arch/svinto.h>
+@@ -797,6 +798,10 @@
+
+ /* main driver initialization routine, called from mem.c */
+
++#ifdef CONFIG_SYSFS
++static struct class *gpio_class;
++#endif
++
+ static int __init gpio_init(void)
+ {
+ int res;
+@@ -810,6 +815,13 @@
+ return res;
+ }
+
++#ifdef CONFIG_SYSFS
++ gpio_class = class_create(THIS_MODULE, "gpio");
++ device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 0), NULL, "gpioa");
++ device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 1), NULL, "gpiob");
++ device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 2), NULL, "leds");
++ device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 3), NULL, "gpiog");
++#endif
+ /* Clear all leds */
+ #if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS)
+ CRIS_LED_NETWORK_SET(0);
+diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/lib/hw_settings.S linux-2.6.36/arch/cris/arch-v10/lib/hw_settings.S
+--- linux-2.6.36.orig/arch/cris/arch-v10/lib/hw_settings.S 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/arch-v10/lib/hw_settings.S 2010-11-15 17:57:17.000000000 +0100
+@@ -58,3 +58,5 @@
+ .dword R_PORT_PB_SET
+ .dword PB_SET_VALUE
+ .dword 0 ; No more register values
++ .ascii "ACME_PART_MAGIC"
++ .dword 0xdeadc0de
+diff -Nur linux-2.6.36.orig/arch/cris/arch-v10/mm/init.c linux-2.6.36/arch/cris/arch-v10/mm/init.c
+--- linux-2.6.36.orig/arch/cris/arch-v10/mm/init.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/arch-v10/mm/init.c 2010-11-15 17:57:17.000000000 +0100
+@@ -184,6 +184,9 @@
+
+ free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+ }
++void free_initrd_mem(unsigned long start, unsigned long end)
++{
++}
+
+ /* Initialize remaps of some I/O-ports. It is important that this
+ * is called before any driver is initialized.
+diff -Nur linux-2.6.36.orig/arch/cris/boot/Makefile linux-2.6.36/arch/cris/boot/Makefile
+--- linux-2.6.36.orig/arch/cris/boot/Makefile 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/boot/Makefile 2010-11-15 17:57:17.000000000 +0100
+@@ -5,7 +5,7 @@
+ objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+ objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss --remove-section=.note.gnu.build-id
+
+-OBJCOPYFLAGS = -O binary $(objcopyflags-y)
++#OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
+
+ subdir- := compressed rescue
+@@ -17,7 +17,6 @@
+
+ $(obj)/compressed/vmlinux: $(obj)/Image FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
+- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
+
+ $(obj)/zImage: $(obj)/compressed/vmlinux
+ @cp $< $@
+diff -Nur linux-2.6.36.orig/arch/cris/boot/compressed/Makefile linux-2.6.36/arch/cris/boot/compressed/Makefile
+--- linux-2.6.36.orig/arch/cris/boot/compressed/Makefile 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/arch/cris/boot/compressed/Makefile 2010-11-15 17:57:17.000000000 +0100
+@@ -18,7 +18,7 @@
+ OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+ OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+ OBJECTS= $(OBJECTS-y) $(obj)/misc.o
+-OBJCOPYFLAGS = -O binary --remove-section=.bss
++#OBJCOPYFLAGS = -O binary --remove-section=.bss
+
+ quiet_cmd_image = BUILD $@
+ cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
+diff -Nur linux-2.6.36.orig/drivers/net/cris/eth_v10.c linux-2.6.36/drivers/net/cris/eth_v10.c
+--- linux-2.6.36.orig/drivers/net/cris/eth_v10.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/drivers/net/cris/eth_v10.c 2010-11-15 17:57:17.000000000 +0100
+@@ -1718,7 +1718,7 @@
+ static void
+ e100_netpoll(struct net_device* netdev)
+ {
+- e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL);
++ e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev);
+ }
+ #endif
+
+diff -Nur linux-2.6.36.orig/drivers/serial/crisv10.c linux-2.6.36/drivers/serial/crisv10.c
+--- linux-2.6.36.orig/drivers/serial/crisv10.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/drivers/serial/crisv10.c 2010-11-15 17:57:17.000000000 +0100
+@@ -13,6 +13,7 @@
+ #include <linux/errno.h>
+ #include <linux/signal.h>
+ #include <linux/sched.h>
++#include <linux/smp_lock.h>
+ #include <linux/timer.h>
+ #include <linux/interrupt.h>
+ #include <linux/tty.h>
+@@ -27,6 +28,7 @@
+ #include <linux/kernel.h>
+ #include <linux/mutex.h>
+ #include <linux/bitops.h>
++#include <linux/device.h>
+ #include <linux/seq_file.h>
+ #include <linux/delay.h>
+ #include <linux/module.h>
+@@ -4426,6 +4428,7 @@
+ #endif
+ };
+
++static struct class *rs_class;
+ static int __init rs_init(void)
+ {
+ int i;
+@@ -4559,6 +4562,24 @@
+ #endif
+ #endif /* CONFIG_SVINTO_SIM */
+
++ rs_class = class_create(THIS_MODULE, "rs_tty");
++#ifdef CONFIG_ETRAX_SERIAL_PORT0
++ device_create(rs_class, NULL,
++ MKDEV(TTY_MAJOR, 64), NULL, "ttyS0");
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT1
++ device_create(rs_class, NULL,
++ MKDEV(TTY_MAJOR, 65), NULL, "ttyS1");
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT2
++ device_create(rs_class, NULL,
++ MKDEV(TTY_MAJOR, 66), NULL, "ttyS2");
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT3
++ device_create(rs_class, NULL,
++ MKDEV(TTY_MAJOR, 67), NULL, "ttyS3");
++#endif
++
+ return 0;
+ }
+
+diff -Nur linux-2.6.36.orig/drivers/usb/Makefile linux-2.6.36/drivers/usb/Makefile
+--- linux-2.6.36.orig/drivers/usb/Makefile 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/drivers/usb/Makefile 2010-11-15 17:57:18.000000000 +0100
+@@ -21,6 +21,7 @@
+ obj-$(CONFIG_USB_R8A66597_HCD) += host/
+ obj-$(CONFIG_USB_HWA_HCD) += host/
+ obj-$(CONFIG_USB_ISP1760_HCD) += host/
++obj-$(CONFIG_ETRAX_USB_HOST) += host/
+ obj-$(CONFIG_USB_IMX21_HCD) += host/
+
+ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
+diff -Nur linux-2.6.36.orig/drivers/usb/host/Makefile linux-2.6.36/drivers/usb/host/Makefile
+--- linux-2.6.36.orig/drivers/usb/host/Makefile 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/drivers/usb/host/Makefile 2010-11-15 17:57:18.000000000 +0100
+@@ -32,5 +32,6 @@
+ obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
+ obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
+ obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
++obj-$(CONFIG_ETRAX_USB_HOST) += hc-crisv10.o
+ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
+
+diff -Nur linux-2.6.36.orig/drivers/usb/host/hc-cris-dbg.h linux-2.6.36/drivers/usb/host/hc-cris-dbg.h
+--- linux-2.6.36.orig/drivers/usb/host/hc-cris-dbg.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.36/drivers/usb/host/hc-cris-dbg.h 2010-11-15 17:57:17.000000000 +0100
+@@ -0,0 +1,146 @@
++
++/* macros for debug output */
++
++#define warn(fmt, args...) \
++ printk(KERN_INFO "crisv10 warn: ");printk(fmt, ## args)
++
++#define hcd_dbg(hcd, fmt, args...) \
++ dev_info(hcd->self.controller, fmt, ## args)
++#define hcd_err(hcd, fmt, args...) \
++ dev_err(hcd->self.controller, fmt, ## args)
++#define hcd_info(hcd, fmt, args...) \
++ dev_info(hcd->self.controller, fmt, ## args)
++#define hcd_warn(hcd, fmt, args...) \
++ dev_warn(hcd->self.controller, fmt, ## args)
++
++/*
++#define devdrv_dbg(fmt, args...) \
++ printk(KERN_INFO "usb_devdrv dbg: ");printk(fmt, ## args)
++*/
++#define devdrv_dbg(fmt, args...) {}
++
++#define devdrv_err(fmt, args...) \
++ printk(KERN_ERR "usb_devdrv error: ");printk(fmt, ## args)
++#define devdrv_info(fmt, args...) \
++ printk(KERN_INFO "usb_devdrv: ");printk(fmt, ## args)
++
++#define irq_dbg(fmt, args...) \
++ printk(KERN_INFO "crisv10_irq dbg: ");printk(fmt, ## args)
++#define irq_err(fmt, args...) \
++ printk(KERN_ERR "crisv10_irq error: ");printk(fmt, ## args)
++#define irq_warn(fmt, args...) \
++ printk(KERN_INFO "crisv10_irq warn: ");printk(fmt, ## args)
++#define irq_info(fmt, args...) \
++ printk(KERN_INFO "crisv10_hcd: ");printk(fmt, ## args)
++
++/*
++#define rh_dbg(fmt, args...) \
++ printk(KERN_DEBUG "crisv10_rh dbg: ");printk(fmt, ## args)
++*/
++#define rh_dbg(fmt, args...) {}
++
++#define rh_err(fmt, args...) \
++ printk(KERN_ERR "crisv10_rh error: ");printk(fmt, ## args)
++#define rh_warn(fmt, args...) \
++ printk(KERN_INFO "crisv10_rh warning: ");printk(fmt, ## args)
++#define rh_info(fmt, args...) \
++ printk(KERN_INFO "crisv10_rh: ");printk(fmt, ## args)
++
++/*
++#define tc_dbg(fmt, args...) \
++ printk(KERN_INFO "crisv10_tc dbg: ");printk(fmt, ## args)
++*/
++#define tc_dbg(fmt, args...) {while(0){}}
++
++#define tc_err(fmt, args...) \
++ printk(KERN_ERR "crisv10_tc error: ");printk(fmt, ## args)
++/*
++#define tc_warn(fmt, args...) \
++ printk(KERN_INFO "crisv10_tc warning: ");printk(fmt, ## args)
++*/
++#define tc_warn(fmt, args...) {while(0){}}
++
++#define tc_info(fmt, args...) \
++ printk(KERN_INFO "crisv10_tc: ");printk(fmt, ## args)
++
++
++/* Debug print-outs for various traffic types */
++
++#define intr_warn(fmt, args...) \
++ printk(KERN_INFO "crisv10_intr warning: ");printk(fmt, ## args)
++
++#define intr_dbg(fmt, args...) \
++ printk(KERN_DEBUG "crisv10_intr dbg: ");printk(fmt, ## args)
++/*
++#define intr_dbg(fmt, args...) {while(0){}}
++*/
++
++
++#define isoc_err(fmt, args...) \
++ printk(KERN_ERR "crisv10_isoc error: ");printk(fmt, ## args)
++/*
++#define isoc_warn(fmt, args...) \
++ printk(KERN_INFO "crisv10_isoc warning: ");printk(fmt, ## args)
++*/
++#define isoc_warn(fmt, args...) {while(0){}}
++
++/*
++#define isoc_dbg(fmt, args...) \
++ printk(KERN_INFO "crisv10_isoc dbg: ");printk(fmt, ## args)
++*/
++#define isoc_dbg(fmt, args...) {while(0){}}
++
++/*
++#define timer_warn(fmt, args...) \
++ printk(KERN_INFO "crisv10_timer warning: ");printk(fmt, ## args)
++*/
++#define timer_warn(fmt, args...) {while(0){}}
++
++/*
++#define timer_dbg(fmt, args...) \
++ printk(KERN_INFO "crisv10_timer dbg: ");printk(fmt, ## args)
++*/
++#define timer_dbg(fmt, args...) {while(0){}}
++
++
++/* Debug printouts for events related to late finishing of URBs */
++
++#define late_dbg(fmt, args...) \
++ printk(KERN_INFO "crisv10_late dbg: ");printk(fmt, ## args)
++/*
++#define late_dbg(fmt, args...) {while(0){}}
++*/
++
++#define late_warn(fmt, args...) \
++ printk(KERN_INFO "crisv10_late warning: ");printk(fmt, ## args)
++/*
++#define errno_dbg(fmt, args...) \
++ printk(KERN_INFO "crisv10_errno dbg: ");printk(fmt, ## args)
++*/
++#define errno_dbg(fmt, args...) {while(0){}}
++
++
++#define dma_dbg(fmt, args...) \
++ printk(KERN_INFO "crisv10_dma dbg: ");printk(fmt, ## args)
++#define dma_err(fmt, args...) \
++ printk(KERN_ERR "crisv10_dma error: ");printk(fmt, ## args)
++#define dma_warn(fmt, args...) \
++ printk(KERN_INFO "crisv10_dma warning: ");printk(fmt, ## args)
++#define dma_info(fmt, args...) \
++ printk(KERN_INFO "crisv10_dma: ");printk(fmt, ## args)
++
++
++
++#define str_dir(pipe) \
++ (usb_pipeout(pipe) ? "out" : "in")
++#define str_type(pipe) \
++ ({ \
++ char *s = "?"; \
++ switch (usb_pipetype(pipe)) { \
++ case PIPE_ISOCHRONOUS: s = "iso"; break; \
++ case PIPE_INTERRUPT: s = "intr"; break; \
++ case PIPE_CONTROL: s = "ctrl"; break; \
++ case PIPE_BULK: s = "bulk"; break; \
++ }; \
++ s; \
++ })
+diff -Nur linux-2.6.36.orig/drivers/usb/host/hc-crisv10.c linux-2.6.36/drivers/usb/host/hc-crisv10.c
+--- linux-2.6.36.orig/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.36/drivers/usb/host/hc-crisv10.c 2010-11-15 17:57:18.000000000 +0100
+@@ -0,0 +1,4801 @@
++/*
++ *
++ * ETRAX 100LX USB Host Controller Driver
++ *
++ * Copyright (C) 2005, 2006 Axis Communications AB
++ *
++ * Author: Konrad Eriksson <konrad.eriksson@axis.se>
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/moduleparam.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/usb.h>
++#include <linux/platform_device.h>
++#include <linux/usb/hcd.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <arch/dma.h>
++#include <arch/io_interface_mux.h>
++
++#include "hc-crisv10.h"
++#include "hc-cris-dbg.h"
++
++
++/***************************************************************************/
++/***************************************************************************/
++/* Host Controller settings */
++/***************************************************************************/
++/***************************************************************************/
++
++#define VERSION "1.00 hinko.4"
++#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB"
++#define DESCRIPTION "ETRAX 100LX USB Host Controller"
++
++#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR
++#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR
++#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR
++
++/* Number of physical ports in Etrax 100LX */
++#define USB_ROOT_HUB_PORTS 2
++
++const char hc_name[] = "hc-crisv10";
++const char product_desc[] = DESCRIPTION;
++
++/* The number of epids is, among other things, used for pre-allocating
++ ctrl, bulk and isoc EP descriptors (one for each epid).
++ Assumed to be > 1 when initiating the DMA lists. */
++#define NBR_OF_EPIDS 32
++
++/* Support interrupt traffic intervals up to 128 ms. */
++#define MAX_INTR_INTERVAL 128
++
++/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP
++ table must be "invalid". By this we mean that we shouldn't care about epid
++ attentions for this epid, or at least handle them differently from epid
++ attentions for "valid" epids. This define determines which one to use
++ (don't change it). */
++#define INVALID_EPID 31
++/* A special epid for the bulk dummys. */
++#define DUMMY_EPID 30
++
++/* Module settings */
++
++MODULE_DESCRIPTION(DESCRIPTION);
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Konrad Eriksson <konrad.eriksson@axis.se>");
++
++
++/* Module parameters */
++
++/* 0 = No ports enabled
++ 1 = Only port 1 enabled (on board ethernet on devboard)
++ 2 = Only port 2 enabled (external connector on devboard)
++ 3 = Both ports enabled
++*/
++static unsigned int ports = 3;
++module_param(ports, uint, S_IRUGO);
++MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use");
++
++
++/***************************************************************************/
++/***************************************************************************/
++/* Shared global variables for this module */
++/***************************************************************************/
++/***************************************************************************/
++
++/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */
++static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
++
++static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
++
++/* EP descriptor lists for period transfers. Must be 32-bit aligned. */
++static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4)));
++static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4)));
++
++static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
++static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4)));
++
++//static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
++
++/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set,
++ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which
++ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the
++ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors
++ in each frame. */
++static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4)));
++
++/* List of URB pointers, where each points to the active URB for a epid.
++ For Bulk, Ctrl and Intr this means which URB that currently is added to
++ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as
++ URB has completed is the queue examined and the first URB in queue is
++ removed and moved to the activeUrbList while its state change to STARTED and
++ its transfer(s) gets added to DMA list (exception Isoc where URBs enter
++ state STARTED directly and added transfers added to DMA lists). */
++static struct urb *activeUrbList[NBR_OF_EPIDS];
++
++/* Additional software state info for each epid */
++static struct etrax_epid epid_state[NBR_OF_EPIDS];
++
++/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops
++ even if there is new data waiting to be processed */
++static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0);
++static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0);
++
++/* We want the start timer to expire before the eot timer, because the former
++ might start traffic, thus making it unnecessary for the latter to time
++ out. */
++#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */
++#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */
++
++/* Delay before a URB completion happen when it's scheduled to be delayed */
++#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */
++
++/* Simplifying macros for checking software state info of a epid */
++/* ----------------------------------------------------------------------- */
++#define epid_inuse(epid) epid_state[epid].inuse
++#define epid_out_traffic(epid) epid_state[epid].out_traffic
++#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0)
++#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0)
++
++
++/***************************************************************************/
++/***************************************************************************/
++/* DEBUG FUNCTIONS */
++/***************************************************************************/
++/***************************************************************************/
++/* Note that these functions are always available in their "__" variants,
++ for use in error situations. The "__" missing variants are controlled by
++ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */
++static void __dump_urb(struct urb* purb)
++{
++ struct crisv10_urb_priv *urb_priv = purb->hcpriv;
++ int urb_num = -1;
++ if(urb_priv) {
++ urb_num = urb_priv->urb_num;
++ }
++ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num);
++ printk("dev :0x%08lx\n", (unsigned long)purb->dev);
++ printk("pipe :0x%08x\n", purb->pipe);
++ printk("status :%d\n", purb->status);
++ printk("transfer_flags :0x%08x\n", purb->transfer_flags);
++ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer);
++ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length);
++ printk("actual_length :%d\n", purb->actual_length);
++ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet);
++ printk("start_frame :%d\n", purb->start_frame);
++ printk("number_of_packets :%d\n", purb->number_of_packets);
++ printk("interval :%d\n", purb->interval);
++ printk("error_count :%d\n", purb->error_count);
++ printk("context :0x%08lx\n", (unsigned long)purb->context);
++ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete);
++}
++
++static void __dump_in_desc(volatile struct USB_IN_Desc *in)
++{
++ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in);
++ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len);
++ printk(" command : 0x%04x\n", in->command);
++ printk(" next : 0x%08lx\n", in->next);
++ printk(" buf : 0x%08lx\n", in->buf);
++ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len);
++ printk(" status : 0x%04x\n\n", in->status);
++}
++
++static void __dump_sb_desc(volatile struct USB_SB_Desc *sb)
++{
++ char tt = (sb->command & 0x30) >> 4;
++ char *tt_string;
++
++ switch (tt) {
++ case 0:
++ tt_string = "zout";
++ break;
++ case 1:
++ tt_string = "in";
++ break;
++ case 2:
++ tt_string = "out";
++ break;
++ case 3:
++ tt_string = "setup";
++ break;
++ default:
++ tt_string = "unknown (weird)";
++ }
++
++ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb);
++ printk(" command:0x%04x (", sb->command);
++ printk("rem:%d ", (sb->command & 0x3f00) >> 8);
++ printk("full:%d ", (sb->command & 0x40) >> 6);
++ printk("tt:%d(%s) ", tt, tt_string);
++ printk("intr:%d ", (sb->command & 0x8) >> 3);
++ printk("eot:%d ", (sb->command & 0x2) >> 1);
++ printk("eol:%d)", sb->command & 0x1);
++ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len);
++ printk(" next:0x%08lx", sb->next);
++ printk(" buf:0x%08lx\n", sb->buf);
++}
++
++
++static void __dump_ep_desc(volatile struct USB_EP_Desc *ep)
++{
++ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep);
++ printk(" command:0x%04x (", ep->command);
++ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8);
++ printk("enable:%d ", (ep->command & 0x10) >> 4);
++ printk("intr:%d ", (ep->command & 0x8) >> 3);
++ printk("eof:%d ", (ep->command & 0x2) >> 1);
++ printk("eol:%d)", ep->command & 0x1);
++ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len);
++ printk(" next:0x%08lx", ep->next);
++ printk(" sub:0x%08lx\n", ep->sub);
++}
++
++static inline void __dump_ep_list(int pipe_type)
++{
++ volatile struct USB_EP_Desc *ep;
++ volatile struct USB_EP_Desc *first_ep;
++ volatile struct USB_SB_Desc *sb;
++
++ switch (pipe_type)
++ {
++ case PIPE_BULK:
++ first_ep = &TxBulkEPList[0];
++ break;
++ case PIPE_CONTROL:
++ first_ep = &TxCtrlEPList[0];
++ break;
++ case PIPE_INTERRUPT:
++ first_ep = &TxIntrEPList[0];
++ break;
++ case PIPE_ISOCHRONOUS:
++ first_ep = &TxIsocEPList[0];
++ break;
++ default:
++ warn("Cannot dump unknown traffic type");
++ return;
++ }
++ ep = first_ep;
++
++ printk("\n\nDumping EP list...\n\n");
++
++ do {
++ __dump_ep_desc(ep);
++ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */
++ sb = ep->sub ? phys_to_virt(ep->sub) : 0;
++ while (sb) {
++ __dump_sb_desc(sb);
++ sb = sb->next ? phys_to_virt(sb->next) : 0;
++ }
++ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next));
++
++ } while (ep != first_ep);
++}
++
++static inline void __dump_ept_data(int epid)
++{
++ unsigned long flags;
++ __u32 r_usb_ept_data;
++
++ if (epid < 0 || epid > 31) {
++ printk("Cannot dump ept data for invalid epid %d\n", epid);
++ return;
++ }
++
++ local_irq_save(flags);
++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
++ nop();
++ r_usb_ept_data = *R_USB_EPT_DATA;
++ local_irq_restore(flags);
++
++ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid);
++ if (r_usb_ept_data == 0) {
++ /* No need for more detailed printing. */
++ return;
++ }
++ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31);
++ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30);
++ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28);
++ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27);
++ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26);
++ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24);
++ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22);
++ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21);
++ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19);
++ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11);
++ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7);
++ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f));
++}
++
++static inline void __dump_ept_data_iso(int epid)
++{
++ unsigned long flags;
++ __u32 ept_data;
++
++ if (epid < 0 || epid > 31) {
++ printk("Cannot dump ept data for invalid epid %d\n", epid);
++ return;
++ }
++
++ local_irq_save(flags);
++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
++ nop();
++ ept_data = *R_USB_EPT_DATA_ISO;
++ local_irq_restore(flags);
++
++ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid);
++ if (ept_data == 0) {
++ /* No need for more detailed printing. */
++ return;
++ }
++ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid,
++ ept_data));
++ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port,
++ ept_data));
++ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code,
++ ept_data));
++ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len,
++ ept_data));
++ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep,
++ ept_data));
++ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev,
++ ept_data));
++}
++
++static inline void __dump_ept_data_list(void)
++{
++ int i;
++
++ printk("Dumping the whole R_USB_EPT_DATA list\n");
++
++ for (i = 0; i < 32; i++) {
++ __dump_ept_data(i);
++ }
++}
++
++static void debug_epid(int epid) {
++ int i;
++
++ if(epid_isoc(epid)) {
++ __dump_ept_data_iso(epid);
++ } else {
++ __dump_ept_data(epid);
++ }
++
++ printk("Bulk:\n");
++ for(i = 0; i < 32; i++) {
++ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) ==
++ epid) {
++ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i]));
++ }
++ }
++
++ printk("Ctrl:\n");
++ for(i = 0; i < 32; i++) {
++ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) ==
++ epid) {
++ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i]));
++ }
++ }
++
++ printk("Intr:\n");
++ for(i = 0; i < MAX_INTR_INTERVAL; i++) {
++ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) ==
++ epid) {
++ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i]));
++ }
++ }
++
++ printk("Isoc:\n");
++ for(i = 0; i < 32; i++) {
++ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) ==
++ epid) {
++ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i]));
++ }
++ }
++
++ __dump_ept_data_list();
++ __dump_ep_list(PIPE_INTERRUPT);
++ printk("\n\n");
++}
++
++
++
++char* hcd_status_to_str(__u8 bUsbStatus) {
++ static char hcd_status_str[128];
++ hcd_status_str[0] = '\0';
++ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) {
++ strcat(hcd_status_str, "ourun ");
++ }
++ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) {
++ strcat(hcd_status_str, "perror ");
++ }
++ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) {
++ strcat(hcd_status_str, "device_mode ");
++ }
++ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) {
++ strcat(hcd_status_str, "host_mode ");
++ }
++ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) {
++ strcat(hcd_status_str, "started ");
++ }
++ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) {
++ strcat(hcd_status_str, "running ");
++ }
++ return hcd_status_str;
++}
++
++
++char* sblist_to_str(struct USB_SB_Desc* sb_desc) {
++ static char sblist_to_str_buff[128];
++ char tmp[32], tmp2[32];
++ sblist_to_str_buff[0] = '\0';
++ while(sb_desc != NULL) {
++ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) {
++ case 0: sprintf(tmp, "zout"); break;
++ case 1: sprintf(tmp, "in"); break;
++ case 2: sprintf(tmp, "out"); break;
++ case 3: sprintf(tmp, "setup"); break;
++ }
++ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len);
++ strcat(sblist_to_str_buff, tmp2);
++ if(sb_desc->next != 0) {
++ sb_desc = phys_to_virt(sb_desc->next);
++ } else {
++ sb_desc = NULL;
++ }
++ }
++ return sblist_to_str_buff;
++}
++
++char* port_status_to_str(__u16 wPortStatus) {
++ static char port_status_str[128];
++ port_status_str[0] = '\0';
++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) {
++ strcat(port_status_str, "connected ");
++ }
++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) {
++ strcat(port_status_str, "enabled ");
++ }
++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) {
++ strcat(port_status_str, "suspended ");
++ }
++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) {
++ strcat(port_status_str, "reset ");
++ }
++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) {
++ strcat(port_status_str, "full-speed ");
++ } else {
++ strcat(port_status_str, "low-speed ");
++ }
++ return port_status_str;
++}
++
++
++char* endpoint_to_str(struct usb_endpoint_descriptor *ed) {
++ static char endpoint_to_str_buff[128];
++ char tmp[32];
++ int epnum = ed->bEndpointAddress & 0x0F;
++ int dir = ed->bEndpointAddress & 0x80;
++ int type = ed->bmAttributes & 0x03;
++ endpoint_to_str_buff[0] = '\0';
++ sprintf(endpoint_to_str_buff, "ep:%d ", epnum);
++ switch(type) {
++ case 0:
++ sprintf(tmp, " ctrl");
++ break;
++ case 1:
++ sprintf(tmp, " isoc");
++ break;
++ case 2:
++ sprintf(tmp, " bulk");
++ break;
++ case 3:
++ sprintf(tmp, " intr");
++ break;
++ }
++ strcat(endpoint_to_str_buff, tmp);
++ if(dir) {
++ sprintf(tmp, " in");
++ } else {
++ sprintf(tmp, " out");
++ }
++ strcat(endpoint_to_str_buff, tmp);
++
++ return endpoint_to_str_buff;
++}
++
++/* Debug helper functions for Transfer Controller */
++char* pipe_to_str(unsigned int pipe) {
++ static char pipe_to_str_buff[128];
++ char tmp[64];
++ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe));
++ sprintf(tmp, " type:%s", str_type(pipe));
++ strcat(pipe_to_str_buff, tmp);
++
++ sprintf(tmp, " dev:%d", usb_pipedevice(pipe));
++ strcat(pipe_to_str_buff, tmp);
++ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe));
++ strcat(pipe_to_str_buff, tmp);
++ return pipe_to_str_buff;
++}
++
++
++#define USB_DEBUG_DESC 1
++
++#ifdef USB_DEBUG_DESC
++#define dump_in_desc(x) __dump_in_desc(x)
++#define dump_sb_desc(...) __dump_sb_desc(...)
++#define dump_ep_desc(x) __dump_ep_desc(x)
++#define dump_ept_data(x) __dump_ept_data(x)
++#else
++#define dump_in_desc(...) do {} while (0)
++#define dump_sb_desc(...) do {} while (0)
++#define dump_ep_desc(...) do {} while (0)
++#endif
++
++
++/* Uncomment this to enable massive function call trace
++ #define USB_DEBUG_TRACE */
++//#define USB_DEBUG_TRACE 1
++
++#ifdef USB_DEBUG_TRACE
++#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__))
++#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__))
++#else
++#define DBFENTER do {} while (0)
++#define DBFEXIT do {} while (0)
++#endif
++
++#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
++{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
++
++/* Most helpful debugging aid */
++#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__))))
++
++
++/***************************************************************************/
++/***************************************************************************/
++/* Forward declarations */
++/***************************************************************************/
++/***************************************************************************/
++void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg);
++void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg);
++void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg);
++void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg);
++
++void rh_port_status_change(__u16[]);
++int rh_clear_port_feature(__u8, __u16);
++int rh_set_port_feature(__u8, __u16);
++static void rh_disable_port(unsigned int port);
++
++static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
++ int timer);
++
++//static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
++// int mem_flags);
++static int tc_setup_epid(struct urb *urb, int mem_flags);
++static void tc_free_epid(struct usb_host_endpoint *ep);
++static int tc_allocate_epid(void);
++static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status);
++static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
++ int status);
++
++static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
++ int mem_flags);
++static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb);
++
++static inline struct urb *urb_list_first(int epid);
++static inline void urb_list_add(struct urb *urb, int epid,
++ int mem_flags);
++static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid);
++static inline void urb_list_del(struct urb *urb, int epid);
++static inline void urb_list_move_last(struct urb *urb, int epid);
++static inline struct urb *urb_list_next(struct urb *urb, int epid);
++
++int create_sb_for_urb(struct urb *urb, int mem_flags);
++int init_intr_urb(struct urb *urb, int mem_flags);
++
++static inline void etrax_epid_set(__u8 index, __u32 data);
++static inline void etrax_epid_clear_error(__u8 index);
++static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
++ __u8 toggle);
++static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout);
++static inline __u32 etrax_epid_get(__u8 index);
++
++/* We're accessing the same register position in Etrax so
++ when we do full access the internal difference doesn't matter */
++#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data)
++#define etrax_epid_iso_get(index) etrax_epid_get(index)
++
++
++//static void tc_dma_process_isoc_urb(struct urb *urb);
++static void tc_dma_process_queue(int epid);
++static void tc_dma_unlink_intr_urb(struct urb *urb);
++static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc);
++static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc);
++
++static void tc_bulk_start_timer_func(unsigned long dummy);
++static void tc_bulk_eot_timer_func(unsigned long dummy);
++
++
++/*************************************************************/
++/*************************************************************/
++/* Host Controler Driver block */
++/*************************************************************/
++/*************************************************************/
++
++/* HCD operations */
++static irqreturn_t crisv10_hcd_top_irq(int irq, void*);
++static int crisv10_hcd_reset(struct usb_hcd *);
++static int crisv10_hcd_start(struct usb_hcd *);
++static void crisv10_hcd_stop(struct usb_hcd *);
++#ifdef CONFIG_PM
++static int crisv10_hcd_suspend(struct device *, u32, u32);
++static int crisv10_hcd_resume(struct device *, u32);
++#endif /* CONFIG_PM */
++static int crisv10_hcd_get_frame(struct usb_hcd *);
++
++//static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags);
++static int tc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
++//static int tc_urb_dequeue(struct usb_hcd *, struct urb *);
++static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
++static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep);
++
++static int rh_status_data_request(struct usb_hcd *, char *);
++static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16);
++
++#ifdef CONFIG_PM
++static int crisv10_hcd_hub_suspend(struct usb_hcd *);
++static int crisv10_hcd_hub_resume(struct usb_hcd *);
++#endif /* CONFIG_PM */
++#ifdef CONFIG_USB_OTG
++static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned);
++#endif /* CONFIG_USB_OTG */
++
++/* host controller driver interface */
++static const struct hc_driver crisv10_hc_driver =
++ {
++ .description = hc_name,
++ .product_desc = product_desc,
++ .hcd_priv_size = sizeof(struct crisv10_hcd),
++
++ /* Attaching IRQ handler manualy in probe() */
++ /* .irq = crisv10_hcd_irq, */
++
++ .flags = HCD_USB11,
++
++ /* called to init HCD and root hub */
++ .reset = crisv10_hcd_reset,
++ .start = crisv10_hcd_start,
++
++ /* cleanly make HCD stop writing memory and doing I/O */
++ .stop = crisv10_hcd_stop,
++
++ /* return current frame number */
++ .get_frame_number = crisv10_hcd_get_frame,
++
++
++ /* Manage i/o requests via the Transfer Controller */
++ .urb_enqueue = tc_urb_enqueue,
++ .urb_dequeue = tc_urb_dequeue,
++
++ /* hw synch, freeing endpoint resources that urb_dequeue can't */
++ .endpoint_disable = tc_endpoint_disable,
++
++
++ /* Root Hub support */
++ .hub_status_data = rh_status_data_request,
++ .hub_control = rh_control_request,
++#ifdef CONFIG_PM
++ .hub_suspend = rh_suspend_request,
++ .hub_resume = rh_resume_request,
++#endif /* CONFIG_PM */
++#ifdef CONFIG_USB_OTG
++ .start_port_reset = crisv10_hcd_start_port_reset,
++#endif /* CONFIG_USB_OTG */
++ };
++
++
++/*
++ * conversion between pointers to a hcd and the corresponding
++ * crisv10_hcd
++ */
++
++static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd)
++{
++ return (struct crisv10_hcd *) hcd->hcd_priv;
++}
++
++static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd)
++{
++ return container_of((void *) hcd, struct usb_hcd, hcd_priv);
++}
++
++/* check if specified port is in use */
++static inline int port_in_use(unsigned int port)
++{
++ return ports & (1 << port);
++}
++
++/* number of ports in use */
++static inline unsigned int num_ports(void)
++{
++ unsigned int i, num = 0;
++ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
++ if (port_in_use(i))
++ num++;
++ return num;
++}
++
++/* map hub port number to the port number used internally by the HC */
++static inline unsigned int map_port(unsigned int port)
++{
++ unsigned int i, num = 0;
++ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
++ if (port_in_use(i))
++ if (++num == port)
++ return i;
++ return -1;
++}
++
++/* size of descriptors in slab cache */
++#ifndef MAX
++#define MAX(x, y) ((x) > (y) ? (x) : (y))
++#endif
++
++
++/******************************************************************/
++/* Hardware Interrupt functions */
++/******************************************************************/
++
++/* Fast interrupt handler for HC */
++static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd)
++{
++ struct usb_hcd *hcd = vcd;
++ struct crisv10_irq_reg reg;
++ __u32 irq_mask;
++ unsigned long flags;
++
++ DBFENTER;
++
++ ASSERT(hcd != NULL);
++ reg.hcd = hcd;
++
++ /* Turn of other interrupts while handling these sensitive cases */
++ local_irq_save(flags);
++
++ /* Read out which interrupts that are flaged */
++ irq_mask = *R_USB_IRQ_MASK_READ;
++ reg.r_usb_irq_mask_read = irq_mask;
++
++ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that
++ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter
++ clears the ourun and perror fields of R_USB_STATUS. */
++ reg.r_usb_status = *R_USB_STATUS;
++
++ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn
++ interrupts. */
++ reg.r_usb_epid_attn = *R_USB_EPID_ATTN;
++
++ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the
++ port_status interrupt. */
++ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1;
++ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2;
++
++ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */
++ /* Note: the lower 11 bits contain the actual frame number, sent with each
++ sof. */
++ reg.r_usb_fm_number = *R_USB_FM_NUMBER;
++
++ /* Interrupts are handled in order of priority. */
++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) {
++ crisv10_hcd_port_status_irq(&reg);
++ }
++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) {
++ crisv10_hcd_epid_attn_irq(&reg);
++ }
++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) {
++ crisv10_hcd_ctl_status_irq(&reg);
++ }
++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) {
++ crisv10_hcd_isoc_eof_irq(&reg);
++ }
++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) {
++ /* Update/restart the bulk start timer since obviously the channel is
++ running. */
++ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
++ /* Update/restart the bulk eot timer since we just received an bulk eot
++ interrupt. */
++ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
++
++ /* Check for finished bulk transfers on epids */
++ check_finished_bulk_tx_epids(hcd, 0);
++ }
++ local_irq_restore(flags);
++
++ DBFEXIT;
++ return IRQ_HANDLED;
++}
++
++
++void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) {
++ struct usb_hcd *hcd = reg->hcd;
++ struct crisv10_urb_priv *urb_priv;
++ int epid;
++ DBFENTER;
++
++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
++ if (test_bit(epid, (void *)&reg->r_usb_epid_attn)) {
++ struct urb *urb;
++ __u32 ept_data;
++ int error_code;
++
++ if (epid == DUMMY_EPID || epid == INVALID_EPID) {
++ /* We definitely don't care about these ones. Besides, they are
++ always disabled, so any possible disabling caused by the
++ epid attention interrupt is irrelevant. */
++ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid);
++ continue;
++ }
++
++ if(!epid_inuse(epid)) {
++ irq_err("Epid attention on epid:%d that isn't in use\n", epid);
++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
++ debug_epid(epid);
++ continue;
++ }
++
++ /* Note that although there are separate R_USB_EPT_DATA and
++ R_USB_EPT_DATA_ISO registers, they are located at the same address and
++ are of the same size. In other words, this read should be ok for isoc
++ also. */
++ ept_data = etrax_epid_get(epid);
++ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data);
++
++ /* Get the active URB for this epid. We blatantly assume
++ that only this URB could have caused the epid attention. */
++ urb = activeUrbList[epid];
++ if (urb == NULL) {
++ irq_err("Attention on epid:%d error:%d with no active URB.\n",
++ epid, error_code);
++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
++ debug_epid(epid);
++ continue;
++ }
++
++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ ASSERT(urb_priv);
++
++ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */
++ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
++
++ /* Isoc traffic doesn't have error_count_in/error_count_out. */
++ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) &&
++ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 ||
++ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) {
++ /* Check if URB allready is marked for late-finish, we can get
++ several 3rd error for Intr traffic when a device is unplugged */
++ if(urb_priv->later_data == NULL) {
++ /* 3rd error. */
++ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid,
++ str_dir(urb->pipe), str_type(urb->pipe),
++ (unsigned int)urb, urb_priv->urb_num);
++
++ tc_finish_urb_later(hcd, urb, -EPROTO);
++ }
++
++ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
++ irq_warn("Perror for epid:%d\n", epid);
++ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
++ __dump_urb(urb);
++ debug_epid(epid);
++
++ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) {
++ /* invalid ep_id */
++ panic("Perror because of invalid epid."
++ " Deconfigured too early?");
++ } else {
++ /* past eof1, near eof, zout transfer, setup transfer */
++ /* Dump the urb and the relevant EP descriptor. */
++ panic("Something wrong with DMA descriptor contents."
++ " Too much traffic inserted?");
++ }
++ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
++ /* buffer ourun */
++ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
++ __dump_urb(urb);
++ debug_epid(epid);
++
++ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid);
++ } else {
++ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid,
++ str_dir(urb->pipe), str_type(urb->pipe));
++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
++ __dump_urb(urb);
++ debug_epid(epid);
++ }
++
++ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
++ stall)) {
++ /* Not really a protocol error, just says that the endpoint gave
++ a stall response. Note that error_code cannot be stall for isoc. */
++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++ panic("Isoc traffic cannot stall");
++ }
++
++ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid,
++ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb);
++ tc_finish_urb(hcd, urb, -EPIPE);
++
++ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
++ bus_error)) {
++ /* Two devices responded to a transaction request. Must be resolved
++ by software. FIXME: Reset ports? */
++ panic("Bus error for epid %d."
++ " Two devices responded to transaction request\n",
++ epid);
++
++ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
++ buffer_error)) {
++ /* DMA overrun or underrun. */
++ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid,
++ str_dir(urb->pipe), str_type(urb->pipe));
++
++ /* It seems that error_code = buffer_error in
++ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
++ are the same error. */
++ tc_finish_urb(hcd, urb, -EPROTO);
++ } else {
++ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid,
++ str_dir(urb->pipe), str_type(urb->pipe));
++ dump_ept_data(epid);
++ }
++ }
++ }
++ DBFEXIT;
++}
++
++void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg)
++{
++ __u16 port_reg[USB_ROOT_HUB_PORTS];
++ DBFENTER;
++ port_reg[0] = reg->r_usb_rh_port_status_1;
++ port_reg[1] = reg->r_usb_rh_port_status_2;
++ rh_port_status_change(port_reg);
++ DBFEXIT;
++}
++
++void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg)
++{
++ int epid;
++ struct urb *urb;
++ struct crisv10_urb_priv *urb_priv;
++
++ DBFENTER;
++
++ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
++
++ /* Only check epids that are in use, is valid and has SB list */
++ if (!epid_inuse(epid) || epid == INVALID_EPID ||
++ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) {
++ /* Nothing here to see. */
++ continue;
++ }
++ ASSERT(epid_isoc(epid));
++
++ /* Get the active URB for this epid (if any). */
++ urb = activeUrbList[epid];
++ if (urb == 0) {
++ isoc_warn("Ignoring NULL urb for epid:%d\n", epid);
++ continue;
++ }
++ if(!epid_out_traffic(epid)) {
++ /* Sanity check. */
++ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
++
++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ ASSERT(urb_priv);
++
++ if (urb_priv->urb_state == NOT_STARTED) {
++ /* If ASAP is not set and urb->start_frame is the current frame,
++ start the transfer. */
++ if (!(urb->transfer_flags & URB_ISO_ASAP) &&
++ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) {
++ /* EP should not be enabled if we're waiting for start_frame */
++ ASSERT((TxIsocEPList[epid].command &
++ IO_STATE(USB_EP_command, enable, yes)) == 0);
++
++ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid);
++ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
++
++ /* This urb is now active. */
++ urb_priv->urb_state = STARTED;
++ continue;
++ }
++ }
++ }
++ }
++
++ DBFEXIT;
++}
++
++void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg)
++{
++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd);
++
++ DBFENTER;
++ ASSERT(crisv10_hcd);
++
++ irq_dbg("ctr_status_irq, controller status: %s\n",
++ hcd_status_to_str(reg->r_usb_status));
++
++ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB
++ list for the corresponding epid? */
++ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
++ panic("USB controller got ourun.");
++ }
++ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
++
++ /* Before, etrax_usb_do_intr_recover was called on this epid if it was
++ an interrupt pipe. I don't see how re-enabling all EP descriptors
++ will help if there was a programming error. */
++ panic("USB controller got perror.");
++ }
++
++ /* Keep track of USB Controller, if it's running or not */
++ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) {
++ crisv10_hcd->running = 1;
++ } else {
++ crisv10_hcd->running = 0;
++ }
++
++ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) {
++ /* We should never operate in device mode. */
++ panic("USB controller in device mode.");
++ }
++
++ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably
++ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */
++ set_bit(HCD_FLAG_SAW_IRQ, &reg->hcd->flags);
++
++ DBFEXIT;
++}
++
++
++/******************************************************************/
++/* Host Controller interface functions */
++/******************************************************************/
++
++static inline void crisv10_ready_wait(void) {
++ volatile int timeout = 10000;
++ /* Check the busy bit of USB controller in Etrax */
++ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) &&
++ (timeout-- > 0));
++ if(timeout == 0) {
++ warn("Timeout while waiting for USB controller to be idle\n");
++ }
++}
++
++/* reset host controller */
++static int crisv10_hcd_reset(struct usb_hcd *hcd)
++{
++ DBFENTER;
++ hcd_dbg(hcd, "reset\n");
++
++
++ /* Reset the USB interface. */
++ /*
++ *R_USB_COMMAND =
++ IO_STATE(R_USB_COMMAND, port_sel, nop) |
++ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
++ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
++ nop();
++ */
++ DBFEXIT;
++ return 0;
++}
++
++/* start host controller */
++static int crisv10_hcd_start(struct usb_hcd *hcd)
++{
++ DBFENTER;
++ hcd_dbg(hcd, "start\n");
++
++ crisv10_ready_wait();
++
++ /* Start processing of USB traffic. */
++ *R_USB_COMMAND =
++ IO_STATE(R_USB_COMMAND, port_sel, nop) |
++ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
++
++ nop();
++
++ hcd->state = HC_STATE_RUNNING;
++
++ DBFEXIT;
++ return 0;
++}
++
++/* stop host controller */
++static void crisv10_hcd_stop(struct usb_hcd *hcd)
++{
++ DBFENTER;
++ hcd_dbg(hcd, "stop\n");
++ crisv10_hcd_reset(hcd);
++ DBFEXIT;
++}
++
++/* return the current frame number */
++static int crisv10_hcd_get_frame(struct usb_hcd *hcd)
++{
++ DBFENTER;
++ DBFEXIT;
++ return (*R_USB_FM_NUMBER & 0x7ff);
++}
++
++#ifdef CONFIG_USB_OTG
++
++static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port)
++{
++ return 0; /* no-op for now */
++}
++
++#endif /* CONFIG_USB_OTG */
++
++
++/******************************************************************/
++/* Root Hub functions */
++/******************************************************************/
++
++/* root hub status */
++static const struct usb_hub_status rh_hub_status =
++ {
++ .wHubStatus = 0,
++ .wHubChange = 0,
++ };
++
++/* root hub descriptor */
++static const u8 rh_hub_descr[] =
++ {
++ 0x09, /* bDescLength */
++ 0x29, /* bDescriptorType */
++ USB_ROOT_HUB_PORTS, /* bNbrPorts */
++ 0x00, /* wHubCharacteristics */
++ 0x00,
++ 0x01, /* bPwrOn2pwrGood */
++ 0x00, /* bHubContrCurrent */
++ 0x00, /* DeviceRemovable */
++ 0xff /* PortPwrCtrlMask */
++ };
++
++/* Actual holder of root hub status*/
++struct crisv10_rh rh;
++
++/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */
++int rh_init(void) {
++ int i;
++ /* Reset port status flags */
++ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) {
++ rh.wPortChange[i] = 0;
++ rh.wPortStatusPrev[i] = 0;
++ }
++ return 0;
++}
++
++#define RH_FEAT_MASK ((1<<USB_PORT_FEAT_CONNECTION)|\
++ (1<<USB_PORT_FEAT_ENABLE)|\
++ (1<<USB_PORT_FEAT_SUSPEND)|\
++ (1<<USB_PORT_FEAT_RESET))
++
++/* Handle port status change interrupt (called from bottom part interrupt) */
++void rh_port_status_change(__u16 port_reg[]) {
++ int i;
++ __u16 wChange;
++
++ for(i = 0; i < USB_ROOT_HUB_PORTS; i++) {
++ /* Xor out changes since last read, masked for important flags */
++ wChange = (port_reg[i] & RH_FEAT_MASK) ^ rh.wPortStatusPrev[i];
++ /* Or changes together with (if any) saved changes */
++ rh.wPortChange[i] |= wChange;
++ /* Save new status */
++ rh.wPortStatusPrev[i] = port_reg[i];
++
++ if(wChange) {
++ rh_dbg("Interrupt port_status change port%d: %s Current-status:%s\n", i+1,
++ port_status_to_str(wChange),
++ port_status_to_str(port_reg[i]));
++ }
++ }
++}
++
++/* Construct port status change bitmap for the root hub */
++static int rh_status_data_request(struct usb_hcd *hcd, char *buf)
++{
++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
++ unsigned int i;
++
++// DBFENTER;
++
++ /*
++ * corresponds to hub status change EP (USB 2.0 spec section 11.13.4)
++ * return bitmap indicating ports with status change
++ */
++ *buf = 0;
++ spin_lock(&crisv10_hcd->lock);
++ for (i = 1; i <= crisv10_hcd->num_ports; i++) {
++ if (rh.wPortChange[map_port(i)]) {
++ *buf |= (1 << i);
++ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i,
++ port_status_to_str(rh.wPortChange[map_port(i)]),
++ port_status_to_str(rh.wPortStatusPrev[map_port(i)]));
++ }
++ }
++ spin_unlock(&crisv10_hcd->lock);
++
++// DBFEXIT;
++
++ return *buf == 0 ? 0 : 1;
++}
++
++/* Handle a control request for the root hub (called from hcd_driver) */
++static int rh_control_request(struct usb_hcd *hcd,
++ u16 typeReq,
++ u16 wValue,
++ u16 wIndex,
++ char *buf,
++ u16 wLength) {
++
++ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd);
++ int retval = 0;
++ int len;
++ DBFENTER;
++
++ switch (typeReq) {
++ case GetHubDescriptor:
++ rh_dbg("GetHubDescriptor\n");
++ len = min_t(unsigned int, sizeof rh_hub_descr, wLength);
++ memcpy(buf, rh_hub_descr, len);
++ buf[2] = crisv10_hcd->num_ports;
++ break;
++ case GetHubStatus:
++ rh_dbg("GetHubStatus\n");
++ len = min_t(unsigned int, sizeof rh_hub_status, wLength);
++ memcpy(buf, &rh_hub_status, len);
++ break;
++ case GetPortStatus:
++ if (!wIndex || wIndex > crisv10_hcd->num_ports)
++ goto error;
++ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex,
++ port_status_to_str(rh.wPortChange[map_port(wIndex)]),
++ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)]));
++ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]);
++ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]);
++ break;
++ case SetHubFeature:
++ rh_dbg("SetHubFeature\n");
++ case ClearHubFeature:
++ rh_dbg("ClearHubFeature\n");
++ switch (wValue) {
++ case C_HUB_OVER_CURRENT:
++ case C_HUB_LOCAL_POWER:
++ rh_warn("Not implemented hub request:%d \n", typeReq);
++ /* not implemented */
++ break;
++ default:
++ goto error;
++ }
++ break;
++ case SetPortFeature:
++ if (!wIndex || wIndex > crisv10_hcd->num_ports)
++ goto error;
++ if(rh_set_port_feature(map_port(wIndex), wValue))
++ goto error;
++ break;
++ case ClearPortFeature:
++ if (!wIndex || wIndex > crisv10_hcd->num_ports)
++ goto error;
++ if(rh_clear_port_feature(map_port(wIndex), wValue))
++ goto error;
++ break;
++ default:
++ rh_warn("Unknown hub request: %d\n", typeReq);
++ error:
++ retval = -EPIPE;
++ }
++ DBFEXIT;
++ return retval;
++}
++
++int rh_set_port_feature(__u8 bPort, __u16 wFeature) {
++ __u8 bUsbCommand = 0;
++ switch(wFeature) {
++ case USB_PORT_FEAT_RESET:
++ rh_dbg("SetPortFeature: reset\n");
++ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset);
++ goto set;
++ break;
++ case USB_PORT_FEAT_SUSPEND:
++ rh_dbg("SetPortFeature: suspend\n");
++ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend);
++ goto set;
++ break;
++ case USB_PORT_FEAT_POWER:
++ rh_dbg("SetPortFeature: power\n");
++ break;
++ case USB_PORT_FEAT_C_CONNECTION:
++ rh_dbg("SetPortFeature: c_connection\n");
++ break;
++ case USB_PORT_FEAT_C_RESET:
++ rh_dbg("SetPortFeature: c_reset\n");
++ break;
++ case USB_PORT_FEAT_C_OVER_CURRENT:
++ rh_dbg("SetPortFeature: c_over_current\n");
++ break;
++
++ set:
++ /* Select which port via the port_sel field */
++ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1);
++
++ /* Make sure the controller isn't busy. */
++ crisv10_ready_wait();
++ /* Send out the actual command to the USB controller */
++ *R_USB_COMMAND = bUsbCommand;
++
++ /* If port reset then also bring USB controller into running state */
++ if(wFeature == USB_PORT_FEAT_RESET) {
++ /* Wait a while for controller to first become started after port reset */
++ udelay(12000); /* 12ms blocking wait */
++
++ /* Make sure the controller isn't busy. */
++ crisv10_ready_wait();
++
++ /* If all enabled ports were disabled the host controller goes down into
++ started mode, so we need to bring it back into the running state.
++ (This is safe even if it's already in the running state.) */
++ *R_USB_COMMAND =
++ IO_STATE(R_USB_COMMAND, port_sel, nop) |
++ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
++ }
++
++ break;
++ default:
++ rh_dbg("SetPortFeature: unknown feature\n");
++ return -1;
++ }
++ return 0;
++}
++
++int rh_clear_port_feature(__u8 bPort, __u16 wFeature) {
++ switch(wFeature) {
++ case USB_PORT_FEAT_ENABLE:
++ rh_dbg("ClearPortFeature: enable\n");
++ rh_disable_port(bPort);
++ break;
++ case USB_PORT_FEAT_SUSPEND:
++ rh_dbg("ClearPortFeature: suspend\n");
++ break;
++ case USB_PORT_FEAT_POWER:
++ rh_dbg("ClearPortFeature: power\n");
++ break;
++
++ case USB_PORT_FEAT_C_ENABLE:
++ rh_dbg("ClearPortFeature: c_enable\n");
++ goto clear;
++ case USB_PORT_FEAT_C_SUSPEND:
++ rh_dbg("ClearPortFeature: c_suspend\n");
++ goto clear;
++ case USB_PORT_FEAT_C_CONNECTION:
++ rh_dbg("ClearPortFeature: c_connection\n");
++ goto clear;
++ case USB_PORT_FEAT_C_OVER_CURRENT:
++ rh_dbg("ClearPortFeature: c_over_current\n");
++ goto clear;
++ case USB_PORT_FEAT_C_RESET:
++ rh_dbg("ClearPortFeature: c_reset\n");
++ goto clear;
++ clear:
++ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16));
++ break;
++ default:
++ rh_dbg("ClearPortFeature: unknown feature\n");
++ return -1;
++ }
++ return 0;
++}
++
++
++#ifdef CONFIG_PM
++/* Handle a suspend request for the root hub (called from hcd_driver) */
++static int rh_suspend_request(struct usb_hcd *hcd)
++{
++ return 0; /* no-op for now */
++}
++
++/* Handle a resume request for the root hub (called from hcd_driver) */
++static int rh_resume_request(struct usb_hcd *hcd)
++{
++ return 0; /* no-op for now */
++}
++#endif /* CONFIG_PM */
++
++
++
++/* Wrapper function for workaround port disable registers in USB controller */
++static void rh_disable_port(unsigned int port) {
++ volatile int timeout = 10000;
++ volatile char* usb_portx_disable;
++ switch(port) {
++ case 0:
++ usb_portx_disable = R_USB_PORT1_DISABLE;
++ break;
++ case 1:
++ usb_portx_disable = R_USB_PORT2_DISABLE;
++ break;
++ default:
++ /* Invalid port index */
++ return;
++ }
++ /* Set disable flag in special register */
++ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
++ /* Wait until not enabled anymore */
++ while((rh.wPortStatusPrev[port] &
++ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) &&
++ (timeout-- > 0));
++ if(timeout == 0) {
++ warn("Timeout while waiting for port %d to become disabled\n", port);
++ }
++ /* clear disable flag in special register */
++ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
++ rh_info("Physical port %d disabled\n", port+1);
++}
++
++
++/******************************************************************/
++/* Transfer Controller (TC) functions */
++/******************************************************************/
++
++/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it
++ dynamically?
++ To adjust it dynamically we would have to get an interrupt when we reach
++ the end of the rx descriptor list, or when we get close to the end, and
++ then allocate more descriptors. */
++#define NBR_OF_RX_DESC 512
++#define RX_DESC_BUF_SIZE 1024
++#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE)
++
++
++/* Local variables for Transfer Controller */
++/* --------------------------------------- */
++
++/* This is a circular (double-linked) list of the active urbs for each epid.
++ The head is never removed, and new urbs are linked onto the list as
++ urb_entry_t elements. Don't reference urb_list directly; use the wrapper
++ functions instead (which includes spin_locks) */
++static struct list_head urb_list[NBR_OF_EPIDS];
++
++/* Read about the need and usage of this lock in submit_ctrl_urb. */
++/* Lock for URB lists for each EPID */
++static spinlock_t urb_list_lock;
++
++/* Lock for EPID array register (R_USB_EPT_x) in Etrax */
++static spinlock_t etrax_epid_lock;
++
++/* Lock for dma8 sub0 handling */
++static spinlock_t etrax_dma8_sub0_lock;
++
++/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line.
++ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be
++ cache aligned. */
++static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32)));
++static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4)));
++
++/* Pointers into RxDescList. */
++static volatile struct USB_IN_Desc *myNextRxDesc;
++static volatile struct USB_IN_Desc *myLastRxDesc;
++
++/* A zout transfer makes a memory access at the address of its buf pointer,
++ which means that setting this buf pointer to 0 will cause an access to the
++ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes
++ (depending on DMA burst size) transfer.
++ Instead, we set it to 1, and point it to this buffer. */
++static int zout_buffer[4] __attribute__ ((aligned (4)));
++
++/* Cache for allocating new EP and SB descriptors. */
++//static kmem_cache_t *usb_desc_cache;
++static struct kmem_cache *usb_desc_cache;
++
++/* Cache for the data allocated in the isoc descr top half. */
++//static kmem_cache_t *isoc_compl_cache;
++static struct kmem_cache *isoc_compl_cache;
++
++/* Cache for the data allocated when delayed finishing of URBs */
++//static kmem_cache_t *later_data_cache;
++static struct kmem_cache *later_data_cache;
++
++/* Counter to keep track of how many Isoc EP we have sat up. Used to enable
++ and disable iso_eof interrupt. We only need these interrupts when we have
++ Isoc data endpoints (consumes CPU cycles).
++ FIXME: This could be more fine granular, so this interrupt is only enabled
++ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */
++static int isoc_epid_counter;
++
++/* Protecting wrapper functions for R_USB_EPT_x */
++/* -------------------------------------------- */
++static inline void etrax_epid_set(__u8 index, __u32 data) {
++ unsigned long flags;
++ spin_lock_irqsave(&etrax_epid_lock, flags);
++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
++ nop();
++ *R_USB_EPT_DATA = data;
++ spin_unlock_irqrestore(&etrax_epid_lock, flags);
++}
++
++static inline void etrax_epid_clear_error(__u8 index) {
++ unsigned long flags;
++ spin_lock_irqsave(&etrax_epid_lock, flags);
++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
++ nop();
++ *R_USB_EPT_DATA &=
++ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
++ IO_MASK(R_USB_EPT_DATA, error_count_out) |
++ IO_MASK(R_USB_EPT_DATA, error_code));
++ spin_unlock_irqrestore(&etrax_epid_lock, flags);
++}
++
++static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
++ __u8 toggle) {
++ unsigned long flags;
++ spin_lock_irqsave(&etrax_epid_lock, flags);
++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
++ nop();
++ if(dirout) {
++ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out);
++ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle);
++ } else {
++ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in);
++ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle);
++ }
++ spin_unlock_irqrestore(&etrax_epid_lock, flags);
++}
++
++static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) {
++ unsigned long flags;
++ __u8 toggle;
++ spin_lock_irqsave(&etrax_epid_lock, flags);
++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
++ nop();
++ if (dirout) {
++ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA);
++ } else {
++ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA);
++ }
++ spin_unlock_irqrestore(&etrax_epid_lock, flags);
++ return toggle;
++}
++
++
++static inline __u32 etrax_epid_get(__u8 index) {
++ unsigned long flags;
++ __u32 data;
++ spin_lock_irqsave(&etrax_epid_lock, flags);
++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
++ nop();
++ data = *R_USB_EPT_DATA;
++ spin_unlock_irqrestore(&etrax_epid_lock, flags);
++ return data;
++}
++
++
++
++
++/* Main functions for Transfer Controller */
++/* -------------------------------------- */
++
++/* Init structs, memories and lists used by Transfer Controller */
++int tc_init(struct usb_hcd *hcd) {
++ int i;
++ /* Clear software state info for all epids */
++ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS);
++
++ /* Set Invalid and Dummy as being in use and disabled */
++ epid_state[INVALID_EPID].inuse = 1;
++ epid_state[DUMMY_EPID].inuse = 1;
++ epid_state[INVALID_EPID].disabled = 1;
++ epid_state[DUMMY_EPID].disabled = 1;
++
++ /* Clear counter for how many Isoc epids we have sat up */
++ isoc_epid_counter = 0;
++
++ /* Initialize the urb list by initiating a head for each list.
++ Also reset list hodling active URB for each epid */
++ for (i = 0; i < NBR_OF_EPIDS; i++) {
++ INIT_LIST_HEAD(&urb_list[i]);
++ activeUrbList[i] = NULL;
++ }
++
++ /* Init lock for URB lists */
++ spin_lock_init(&urb_list_lock);
++ /* Init lock for Etrax R_USB_EPT register */
++ spin_lock_init(&etrax_epid_lock);
++ /* Init lock for Etrax dma8 sub0 handling */
++ spin_lock_init(&etrax_dma8_sub0_lock);
++
++ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */
++
++ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also
++ allocate SB descriptors from this cache. This is ok since
++ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */
++// usb_desc_cache = kmem_cache_create("usb_desc_cache",
++// sizeof(struct USB_EP_Desc), 0,
++// SLAB_HWCACHE_ALIGN, 0, 0);
++ usb_desc_cache = kmem_cache_create(
++ "usb_desc_cache",
++ sizeof(struct USB_EP_Desc),
++ 0,
++ SLAB_HWCACHE_ALIGN,
++ NULL);
++ if(usb_desc_cache == NULL) {
++ return -ENOMEM;
++ }
++
++ /* Create slab cache for speedy allocation of memory for isoc bottom-half
++ interrupt handling */
++// isoc_compl_cache =
++// kmem_cache_create("isoc_compl_cache",
++// sizeof(struct crisv10_isoc_complete_data),
++// 0, SLAB_HWCACHE_ALIGN, 0, 0);
++ isoc_compl_cache = kmem_cache_create(
++ "isoc_compl_cache",
++ sizeof(struct crisv10_isoc_complete_data),
++ 0,
++ SLAB_HWCACHE_ALIGN,
++ NULL
++ );
++
++ if(isoc_compl_cache == NULL) {
++ return -ENOMEM;
++ }
++
++ /* Create slab cache for speedy allocation of memory for later URB finish
++ struct */
++// later_data_cache =
++// kmem_cache_create("later_data_cache",
++// sizeof(struct urb_later_data),
++// 0, SLAB_HWCACHE_ALIGN, 0, 0);
++
++ later_data_cache = kmem_cache_create(
++ "later_data_cache",
++ sizeof(struct urb_later_data),
++ 0,
++ SLAB_HWCACHE_ALIGN,
++ NULL
++ );
++
++ if(later_data_cache == NULL) {
++ return -ENOMEM;
++ }
++
++
++ /* Initiate the bulk start timer. */
++ init_timer(&bulk_start_timer);
++ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL;
++ bulk_start_timer.function = tc_bulk_start_timer_func;
++ add_timer(&bulk_start_timer);
++
++
++ /* Initiate the bulk eot timer. */
++ init_timer(&bulk_eot_timer);
++ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL;
++ bulk_eot_timer.function = tc_bulk_eot_timer_func;
++ bulk_eot_timer.data = (unsigned long)hcd;
++ add_timer(&bulk_eot_timer);
++
++ return 0;
++}
++
++/* Uninitialize all resources used by Transfer Controller */
++void tc_destroy(void) {
++
++ /* Destroy all slab cache */
++ kmem_cache_destroy(usb_desc_cache);
++ kmem_cache_destroy(isoc_compl_cache);
++ kmem_cache_destroy(later_data_cache);
++
++ /* Remove timers */
++ del_timer(&bulk_start_timer);
++ del_timer(&bulk_eot_timer);
++}
++
++static void restart_dma8_sub0(void) {
++ unsigned long flags;
++ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags);
++ /* Verify that the dma is not running */
++ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) {
++ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
++ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) {
++ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next);
++ }
++ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID.
++ * ep->next is already a physical address. virt_to_phys is needed, see
++ * http://mhonarc.axis.se/dev-etrax/msg08630.html
++ */
++ //*R_DMA_CH8_SUB0_EP = ep->next;
++ *R_DMA_CH8_SUB0_EP = virt_to_phys(ep);
++ /* Restart the DMA */
++ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
++ }
++ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags);
++}
++
++/* queue an URB with the transfer controller (called from hcd_driver) */
++//static int tc_urb_enqueue(struct usb_hcd *hcd,
++// struct usb_host_endpoint *ep,
++// struct urb *urb,
++// gfp_t mem_flags) {
++static int tc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
++{
++ int epid;
++ int retval;
++// int bustime = 0;
++ int maxpacket;
++ unsigned long flags;
++ struct crisv10_urb_priv *urb_priv;
++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
++ DBFENTER;
++
++ if(!(crisv10_hcd->running)) {
++ /* The USB Controller is not running, probably because no device is
++ attached. No idea to enqueue URBs then */
++ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n",
++ (unsigned int)urb);
++ return -ENOENT;
++ }
++
++ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
++
++ /* hinko ignore usb_pipeisoc */
++#if 0
++ /* Special case check for In Isoc transfers. Specification states that each
++ In Isoc transfer consists of one packet and therefore it should fit into
++ the transfer-buffer of an URB.
++ We do the check here to be sure (an invalid scenario can be produced with
++ parameters to the usbtest suite) */
++ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) &&
++ (urb->transfer_buffer_length < maxpacket)) {
++ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket);
++ return -EMSGSIZE;
++ }
++
++ /* Check if there is enough bandwidth for periodic transfer */
++ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) {
++ /* only check (and later claim) if not already claimed */
++ if (urb->bandwidth == 0) {
++ bustime = usb_check_bandwidth(urb->dev, urb);
++ if (bustime < 0) {
++ tc_err("Not enough periodic bandwidth\n");
++ return -ENOSPC;
++ }
++ }
++ }
++#endif
++
++ /* Check if there is a epid for URBs destination, if not this function
++ set up one. */
++ //epid = tc_setup_epid(ep, urb, mem_flags);
++ epid = tc_setup_epid(urb, mem_flags);
++ if (epid < 0) {
++ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb);
++ DBFEXIT;
++ return -ENOMEM;
++ }
++
++ if(urb == activeUrbList[epid]) {
++ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb);
++ return -ENXIO;
++ }
++
++ if(urb_list_entry(urb, epid)) {
++ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb);
++ return -ENXIO;
++ }
++
++ /* If we actively have flaged endpoint as disabled then refuse submition */
++ if(epid_state[epid].disabled) {
++ return -ENOENT;
++ }
++
++ /* Allocate and init HC-private data for URB */
++ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) {
++ DBFEXIT;
++ return -ENOMEM;
++ }
++ urb_priv = urb->hcpriv;
++
++ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n",
++ (unsigned int)urb, urb_priv->urb_num, epid,
++ pipe_to_str(urb->pipe), urb->transfer_buffer_length);
++
++ /* Create and link SBs required for this URB */
++ retval = create_sb_for_urb(urb, mem_flags);
++ if(retval != 0) {
++ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb,
++ urb_priv->urb_num);
++ urb_priv_free(hcd, urb);
++ DBFEXIT;
++ return retval;
++ }
++
++ /* Init intr EP pool if this URB is a INTR transfer. This pool is later
++ used when inserting EPs in the TxIntrEPList. We do the alloc here
++ so we can't run out of memory later */
++ if(usb_pipeint(urb->pipe)) {
++ retval = init_intr_urb(urb, mem_flags);
++ if(retval != 0) {
++ tc_warn("Failed to init Intr URB\n");
++ urb_priv_free(hcd, urb);
++ DBFEXIT;
++ return retval;
++ }
++ }
++
++ /* Disable other access when inserting USB */
++
++ /* BUG on sleeping inside int disabled if using local_irq_save/local_irq_restore
++ * her - because urb_list_add() and tc_dma_process_queue() save irqs again !??!
++ */
++// local_irq_save(flags);
++
++ /* hinko ignore usb_pipeisoc */
++#if 0
++ /* Claim bandwidth, if needed */
++ if(bustime) {
++ usb_claim_bandwidth(urb->dev, urb, bustime, 0);
++ }
++
++ /* Add URB to EP queue */
++ urb_list_add(urb, epid, mem_flags);
++
++ if(usb_pipeisoc(urb->pipe)) {
++ /* Special processing of Isoc URBs. */
++ tc_dma_process_isoc_urb(urb);
++ } else {
++ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */
++ tc_dma_process_queue(epid);
++ }
++#endif
++ /* Add URB to EP queue */
++ urb_list_add(urb, epid, mem_flags);
++
++ /*hinko link/unlink urb -> ep */
++ spin_lock_irqsave(&crisv10_hcd->lock, flags);
++ //spin_lock(&crisv10_hcd->lock);
++ retval = usb_hcd_link_urb_to_ep(hcd, urb);
++ if (retval) {
++ spin_unlock_irqrestore(&crisv10_hcd->lock, flags);
++ tc_warn("Failed to link urb to ep\n");
++ urb_priv_free(hcd, urb);
++ DBFEXIT;
++ return retval;
++ }
++ spin_unlock_irqrestore(&crisv10_hcd->lock, flags);
++ //spin_unlock(&crisv10_hcd->lock);
++
++ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */
++ tc_dma_process_queue(epid);
++
++// local_irq_restore(flags);
++
++ DBFEXIT;
++ return 0;
++}
++
++/* remove an URB from the transfer controller queues (called from hcd_driver)*/
++//static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
++static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
++{
++ struct crisv10_urb_priv *urb_priv;
++ unsigned long flags;
++ int epid;
++
++ DBFENTER;
++ /* Disable interrupts here since a descriptor interrupt for the isoc epid
++ will modify the sb list. This could possibly be done more granular, but
++ urb_dequeue should not be used frequently anyway.
++ */
++ local_irq_save(flags);
++
++ urb_priv = urb->hcpriv;
++
++ if (!urb_priv) {
++ /* This happens if a device driver calls unlink on an urb that
++ was never submitted (lazy driver) or if the urb was completed
++ while dequeue was being called. */
++ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb);
++ local_irq_restore(flags);
++ return 0;
++ }
++ epid = urb_priv->epid;
++
++ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
++ (urb == activeUrbList[epid]) ? "active" : "queued",
++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
++ str_type(urb->pipe), epid, urb->status,
++ (urb_priv->later_data) ? "later-sched" : "");
++
++ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB
++ that isn't active can be dequeued by just removing it from the queue */
++ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) ||
++ usb_pipeint(urb->pipe)) {
++
++ /* Check if URB haven't gone further than the queue */
++ if(urb != activeUrbList[epid]) {
++ ASSERT(urb_priv->later_data == NULL);
++ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue"
++ " (not active)\n", (unsigned int)urb, urb_priv->urb_num,
++ str_dir(urb->pipe), str_type(urb->pipe), epid);
++
++ /* Finish the URB with error status from USB core */
++ tc_finish_urb(hcd, urb, urb->status);
++ local_irq_restore(flags);
++ return 0;
++ }
++ }
++
++ /* Set URB status to Unlink for handling when interrupt comes. */
++ urb_priv->urb_state = UNLINK;
++
++ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */
++ switch(usb_pipetype(urb->pipe)) {
++ case PIPE_BULK:
++ /* Check if EP still is enabled */
++ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
++ /* The EP was enabled, disable it. */
++ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
++ }
++ /* Kicking dummy list out of the party. */
++ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
++ break;
++ case PIPE_CONTROL:
++ /* Check if EP still is enabled */
++ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
++ /* The EP was enabled, disable it. */
++ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
++ }
++ break;
++ case PIPE_ISOCHRONOUS:
++ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in
++ finish_isoc_urb(). Because there might the case when URB is dequeued
++ but there are other valid URBs waiting */
++
++ /* Check if In Isoc EP still is enabled */
++ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
++ /* The EP was enabled, disable it. */
++ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
++ }
++ break;
++ case PIPE_INTERRUPT:
++ /* Special care is taken for interrupt URBs. EPs are unlinked in
++ tc_finish_urb */
++ break;
++ default:
++ break;
++ }
++
++ /* Asynchronous unlink, finish the URB later from scheduled or other
++ event (data finished, error) */
++ tc_finish_urb_later(hcd, urb, urb->status);
++
++ local_irq_restore(flags);
++ DBFEXIT;
++ return 0;
++}
++
++
++static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) {
++ volatile int timeout = 10000;
++ struct urb* urb;
++ struct crisv10_urb_priv* urb_priv;
++ unsigned long flags;
++
++ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
++ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
++ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
++
++ int type = epid_state[epid].type;
++
++ /* Setting this flag will cause enqueue() to return -ENOENT for new
++ submitions on this endpoint and finish_urb() wont process queue further */
++ epid_state[epid].disabled = 1;
++
++ switch(type) {
++ case PIPE_BULK:
++ /* Check if EP still is enabled */
++ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
++ /* The EP was enabled, disable it. */
++ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
++ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
++
++ /* Do busy-wait until DMA not using this EP descriptor anymore */
++ while((*R_DMA_CH8_SUB0_EP ==
++ virt_to_phys(&TxBulkEPList[epid])) &&
++ (timeout-- > 0));
++ if(timeout == 0) {
++ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for"
++ " epid:%d\n", epid);
++ }
++ }
++ break;
++
++ case PIPE_CONTROL:
++ /* Check if EP still is enabled */
++ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
++ /* The EP was enabled, disable it. */
++ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
++ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
++
++ /* Do busy-wait until DMA not using this EP descriptor anymore */
++ while((*R_DMA_CH8_SUB1_EP ==
++ virt_to_phys(&TxCtrlEPList[epid])) &&
++ (timeout-- > 0));
++ if(timeout == 0) {
++ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for"
++ " epid:%d\n", epid);
++ }
++ }
++ break;
++
++ case PIPE_INTERRUPT:
++ local_irq_save(flags);
++ /* Disable all Intr EPs belonging to epid */
++ first_ep = &TxIntrEPList[0];
++ curr_ep = first_ep;
++ do {
++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
++ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
++ /* Disable EP */
++ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
++ }
++ curr_ep = phys_to_virt(curr_ep->next);
++ } while (curr_ep != first_ep);
++
++ local_irq_restore(flags);
++ break;
++
++ case PIPE_ISOCHRONOUS:
++ /* Check if EP still is enabled */
++ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
++ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid);
++ /* The EP was enabled, disable it. */
++ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
++
++ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
++ (timeout-- > 0));
++ if(timeout == 0) {
++ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for"
++ " epid:%d\n", epid);
++ }
++ }
++ break;
++ }
++
++ local_irq_save(flags);
++
++ /* Finish if there is active URB for this endpoint */
++ if(activeUrbList[epid] != NULL) {
++ urb = activeUrbList[epid];
++ urb_priv = urb->hcpriv;
++ ASSERT(urb_priv);
++ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
++ (urb == activeUrbList[epid]) ? "active" : "queued",
++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
++ str_type(urb->pipe), epid, urb->status,
++ (urb_priv->later_data) ? "later-sched" : "");
++
++ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT);
++ ASSERT(activeUrbList[epid] == NULL);
++ }
++
++ /* Finish any queued URBs for this endpoint. There won't be any resubmitions
++ because epid_disabled causes enqueue() to fail for this endpoint */
++ while((urb = urb_list_first(epid)) != NULL) {
++ urb_priv = urb->hcpriv;
++ ASSERT(urb_priv);
++
++ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
++ (urb == activeUrbList[epid]) ? "active" : "queued",
++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
++ str_type(urb->pipe), epid, urb->status,
++ (urb_priv->later_data) ? "later-sched" : "");
++
++ tc_finish_urb(hcd, urb, -ENOENT);
++ }
++ epid_state[epid].disabled = 0;
++ local_irq_restore(flags);
++}
++
++/* free resources associated with an endpoint (called from hcd_driver) */
++static void tc_endpoint_disable(struct usb_hcd *hcd,
++ struct usb_host_endpoint *ep) {
++ DBFENTER;
++ /* Only free epid if it has been allocated. We get two endpoint_disable
++ requests for ctrl endpoints so ignore the second one */
++ if(ep->hcpriv != NULL) {
++ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
++ int epid = ep_priv->epid;
++ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n",
++ (unsigned int)ep, (unsigned int)ep->hcpriv,
++ endpoint_to_str(&(ep->desc)), epid);
++
++ tc_sync_finish_epid(hcd, epid);
++
++ ASSERT(activeUrbList[epid] == NULL);
++ ASSERT(list_empty(&urb_list[epid]));
++
++ tc_free_epid(ep);
++ } else {
++ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep,
++ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc)));
++ }
++ DBFEXIT;
++}
++
++//static void tc_finish_urb_later_proc(void *data) {
++static void tc_finish_urb_later_proc(struct work_struct *work) {
++ unsigned long flags;
++ //struct urb_later_data* uld = (struct urb_later_data*)data;
++ struct urb_later_data* uld = container_of(work, struct urb_later_data, ws.work);
++ local_irq_save(flags);
++ if(uld->urb == NULL) {
++ late_dbg("Later finish of URB = NULL (allready finished)\n");
++ } else {
++ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv;
++ ASSERT(urb_priv);
++ if(urb_priv->urb_num == uld->urb_num) {
++ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb),
++ urb_priv->urb_num);
++ if(uld->status != uld->urb->status) {
++ errno_dbg("Later-finish URB with status:%d, later-status:%d\n",
++ uld->urb->status, uld->status);
++ }
++ if(uld != urb_priv->later_data) {
++ panic("Scheduled uld not same as URBs uld\n");
++ }
++ tc_finish_urb(uld->hcd, uld->urb, uld->status);
++ } else {
++ late_warn("Ignoring later finish of URB:0x%x[%d]"
++ ", urb_num doesn't match current URB:0x%x[%d]",
++ (unsigned int)(uld->urb), uld->urb_num,
++ (unsigned int)(uld->urb), urb_priv->urb_num);
++ }
++ }
++ local_irq_restore(flags);
++ kmem_cache_free(later_data_cache, uld);
++}
++
++static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
++ int status) {
++ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
++ struct urb_later_data* uld;
++
++ ASSERT(urb_priv);
++
++ if(urb_priv->later_data != NULL) {
++ /* Later-finish allready scheduled for this URB, just update status to
++ return when finishing later */
++ errno_dbg("Later-finish schedule change URB status:%d with new"
++ " status:%d\n", urb_priv->later_data->status, status);
++
++ urb_priv->later_data->status = status;
++ return;
++ }
++
++ uld = kmem_cache_alloc(later_data_cache, GFP_ATOMIC);
++ ASSERT(uld);
++
++ uld->hcd = hcd;
++ uld->urb = urb;
++ uld->urb_num = urb_priv->urb_num;
++ uld->status = status;
++
++ //INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld);
++ INIT_DELAYED_WORK(&uld->ws, tc_finish_urb_later_proc);
++ urb_priv->later_data = uld;
++
++ /* Schedule the finishing of the URB to happen later */
++ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY);
++}
++
++ /* hinko ignore usb_pipeisoc */
++#if 0
++static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
++ int status);
++#endif
++
++static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) {
++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
++ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
++ int epid;
++ char toggle;
++ int urb_num;
++ unsigned long flags;
++
++ DBFENTER;
++ ASSERT(urb_priv != NULL);
++ epid = urb_priv->epid;
++ urb_num = urb_priv->urb_num;
++
++ if(urb != activeUrbList[epid]) {
++ if(urb_list_entry(urb, epid)) {
++ /* Remove this URB from the list. Only happens when URB are finished
++ before having been processed (dequeing) */
++ urb_list_del(urb, epid);
++ } else {
++ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for"
++ " epid:%d\n", (unsigned int)urb, urb_num, epid);
++ }
++ }
++
++ /* Cancel any pending later-finish of this URB */
++ if(urb_priv->later_data) {
++ urb_priv->later_data->urb = NULL;
++ }
++
++ /* For an IN pipe, we always set the actual length, regardless of whether
++ there was an error or not (which means the device driver can use the data
++ if it wants to). */
++ if(usb_pipein(urb->pipe)) {
++ urb->actual_length = urb_priv->rx_offset;
++ } else {
++ /* Set actual_length for OUT urbs also; the USB mass storage driver seems
++ to want that. */
++ if (status == 0 && urb->status == -EINPROGRESS) {
++ urb->actual_length = urb->transfer_buffer_length;
++ } else {
++ /* We wouldn't know of any partial writes if there was an error. */
++ urb->actual_length = 0;
++ }
++ }
++
++
++ /* URB status mangling */
++ if(urb->status == -EINPROGRESS) {
++ /* The USB core hasn't changed the status, let's set our finish status */
++ urb->status = status;
++
++ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) &&
++ usb_pipein(urb->pipe) &&
++ (urb->actual_length != urb->transfer_buffer_length)) {
++ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's
++ max length) is to be treated as an error. */
++ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short"
++ " data:%d\n", (unsigned int)urb, urb_num,
++ urb->actual_length);
++ urb->status = -EREMOTEIO;
++ }
++
++ if(urb_priv->urb_state == UNLINK) {
++ /* URB has been requested to be unlinked asynchronously */
++ urb->status = -ECONNRESET;
++ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n",
++ (unsigned int)urb, urb_num, urb->status);
++ }
++ } else {
++ /* The USB Core wants to signal some error via the URB, pass it through */
++ }
++
++ /* hinko ignore usb_pipeisoc */
++#if 0
++ /* use completely different finish function for Isoc URBs */
++ if(usb_pipeisoc(urb->pipe)) {
++ tc_finish_isoc_urb(hcd, urb, status);
++ return;
++ }
++#endif
++
++ /* Do special unlinking of EPs for Intr traffic */
++ if(usb_pipeint(urb->pipe)) {
++ tc_dma_unlink_intr_urb(urb);
++ }
++
++ /* hinko ignore usb_pipeisoc */
++#if 0
++ /* Release allocated bandwidth for periodic transfers */
++ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe))
++ usb_release_bandwidth(urb->dev, urb, 0);
++#endif
++
++ /* This URB is active on EP */
++ if(urb == activeUrbList[epid]) {
++ /* We need to fiddle with the toggle bits because the hardware doesn't do
++ it for us. */
++ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe));
++ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
++ usb_pipeout(urb->pipe), toggle);
++
++ /* Checks for Ctrl and Bulk EPs */
++ switch(usb_pipetype(urb->pipe)) {
++ case PIPE_BULK:
++ /* Check so Bulk EP realy is disabled before finishing active URB */
++ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
++ IO_STATE(USB_EP_command, enable, no));
++ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
++ process Bulk EP. */
++ TxBulkEPList[epid].sub = 0;
++ /* No need to wait for the DMA before changing the next pointer.
++ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use
++ the last one (INVALID_EPID) for actual traffic. */
++ TxBulkEPList[epid].next =
++ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
++ break;
++ case PIPE_CONTROL:
++ /* Check so Ctrl EP realy is disabled before finishing active URB */
++ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
++ IO_STATE(USB_EP_command, enable, no));
++ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
++ process Ctrl EP. */
++ TxCtrlEPList[epid].sub = 0;
++ break;
++ }
++ }
++
++ /* Free HC-private URB data*/
++ urb_priv_free(hcd, urb);
++
++ if(urb->status) {
++ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
++ (unsigned int)urb, urb_num, str_dir(urb->pipe),
++ str_type(urb->pipe), urb->actual_length, urb->status);
++ } else {
++ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
++ (unsigned int)urb, urb_num, str_dir(urb->pipe),
++ str_type(urb->pipe), urb->actual_length, urb->status);
++ }
++
++ /* If we just finished an active URB, clear active pointer. */
++ if (urb == activeUrbList[epid]) {
++ /* Make URB not active on EP anymore */
++ activeUrbList[epid] = NULL;
++
++ if(urb->status == 0) {
++ /* URB finished sucessfully, process queue to see if there are any more
++ URBs waiting before we call completion function.*/
++ if(crisv10_hcd->running) {
++ /* Only process queue if USB controller is running */
++ tc_dma_process_queue(epid);
++ } else {
++ tc_warn("No processing of queue for epid:%d, USB Controller not"
++ " running\n", epid);
++ }
++ }
++ }
++
++ /* Hand the URB from HCD to its USB device driver, using its completion
++ functions */
++// usb_hcd_giveback_urb (hcd, urb);
++ /**
++ * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
++ * @hcd: host controller to which @urb was submitted
++ * @urb: URB being unlinked
++ *
++ * Host controller drivers should call this routine before calling
++ * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
++ * interrupts must be disabled. The actions carried out here are required
++ * for URB completion.
++ */
++
++ /*hinko link/unlink urb -> ep */
++ //spin_lock(&crisv10_hcd->lock);
++ spin_lock_irqsave(&crisv10_hcd->lock, flags);
++ usb_hcd_unlink_urb_from_ep(hcd, urb);
++ usb_hcd_giveback_urb(hcd, urb, status);
++ //spin_unlock(&crisv10_hcd->lock);
++ spin_unlock_irqrestore(&crisv10_hcd->lock, flags);
++
++ /* Check the queue once more if the URB returned with error, because we
++ didn't do it before the completion function because the specification
++ states that the queue should not restart until all it's unlinked
++ URBs have been fully retired, with the completion functions run */
++ if(crisv10_hcd->running) {
++ /* Only process queue if USB controller is running */
++ tc_dma_process_queue(epid);
++ } else {
++ tc_warn("No processing of queue for epid:%d, USB Controller not running\n",
++ epid);
++ }
++
++ DBFEXIT;
++}
++
++ /* hinko ignore usb_pipeisoc */
++#if 0
++static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
++ int status) {
++ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
++ int epid, i;
++ volatile int timeout = 10000;
++
++ ASSERT(urb_priv);
++ epid = urb_priv->epid;
++
++ ASSERT(usb_pipeisoc(urb->pipe));
++
++ /* Set that all isoc packets have status and length set before
++ completing the urb. */
++ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){
++ urb->iso_frame_desc[i].actual_length = 0;
++ urb->iso_frame_desc[i].status = -EPROTO;
++ }
++
++ /* Check if the URB is currently active (done or error) */
++ if(urb == activeUrbList[epid]) {
++ /* Check if there are another In Isoc URB queued for this epid */
++ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) {
++ /* Move it from queue to active and mark it started so Isoc transfers
++ won't be interrupted.
++ All Isoc URBs data transfers are already added to DMA lists so we
++ don't have to insert anything in DMA lists here. */
++ activeUrbList[epid] = urb_list_first(epid);
++ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state =
++ STARTED;
++ urb_list_del(activeUrbList[epid], epid);
++
++ if(urb->status) {
++ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
++ " status:%d, new waiting URB:0x%x[%d]\n",
++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
++ str_type(urb->pipe), urb_priv->isoc_packet_counter,
++ urb->number_of_packets, urb->status,
++ (unsigned int)activeUrbList[epid],
++ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num);
++ }
++
++ } else { /* No other URB queued for this epid */
++ if(urb->status) {
++ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
++ " status:%d, no new URB waiting\n",
++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
++ str_type(urb->pipe), urb_priv->isoc_packet_counter,
++ urb->number_of_packets, urb->status);
++ }
++
++ /* Check if EP is still enabled, then shut it down. */
++ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
++ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid);
++
++ /* Should only occur for In Isoc EPs where SB isn't consumed. */
++ ASSERT(usb_pipein(urb->pipe));
++
++ /* Disable it and wait for it to stop */
++ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
++
++ /* Ah, the luxury of busy-wait. */
++ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
++ (timeout-- > 0));
++ if(timeout == 0) {
++ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid);
++ }
++ }
++
++ /* Unlink SB to say that epid is finished. */
++ TxIsocEPList[epid].sub = 0;
++ TxIsocEPList[epid].hw_len = 0;
++
++ /* No URB active for EP anymore */
++ activeUrbList[epid] = NULL;
++ }
++ } else { /* Finishing of not active URB (queued up with SBs thought) */
++ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d,"
++ " SB queued but not active\n",
++ (unsigned int)urb, str_dir(urb->pipe),
++ urb_priv->isoc_packet_counter, urb->number_of_packets,
++ urb->status);
++ if(usb_pipeout(urb->pipe)) {
++ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */
++ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb;
++
++ iter_sb = TxIsocEPList[epid].sub ?
++ phys_to_virt(TxIsocEPList[epid].sub) : 0;
++ prev_sb = 0;
++
++ /* SB that is linked before this URBs first SB */
++ while (iter_sb && (iter_sb != urb_priv->first_sb)) {
++ prev_sb = iter_sb;
++ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
++ }
++
++ if (iter_sb == 0) {
++ /* Unlink of the URB currently being transmitted. */
++ prev_sb = 0;
++ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
++ }
++
++ while (iter_sb && (iter_sb != urb_priv->last_sb)) {
++ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
++ }
++
++ if (iter_sb) {
++ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
++ } else {
++ /* This should only happen if the DMA has completed
++ processing the SB list for this EP while interrupts
++ are disabled. */
++ isoc_dbg("Isoc urb not found, already sent?\n");
++ next_sb = 0;
++ }
++ if (prev_sb) {
++ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0;
++ } else {
++ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0;
++ }
++ }
++ }
++
++ /* Free HC-private URB data*/
++ urb_priv_free(hcd, urb);
++
++ usb_release_bandwidth(urb->dev, urb, 0);
++
++ /* Hand the URB from HCD to its USB device driver, using its completion
++ functions */
++ usb_hcd_giveback_urb (hcd, urb);
++}
++#endif
++
++static __u32 urb_num = 0;
++
++/* allocate and initialize URB private data */
++static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
++ int mem_flags) {
++ struct crisv10_urb_priv *urb_priv;
++
++ urb_priv = kmalloc(sizeof *urb_priv, mem_flags);
++ if (!urb_priv)
++ return -ENOMEM;
++ memset(urb_priv, 0, sizeof *urb_priv);
++
++ urb_priv->epid = epid;
++ urb_priv->urb_state = NOT_STARTED;
++
++ urb->hcpriv = urb_priv;
++ /* Assign URB a sequence number, and increment counter */
++ urb_priv->urb_num = urb_num;
++ urb_num++;
++ return 0;
++}
++
++/* free URB private data */
++static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) {
++ int i;
++ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
++ ASSERT(urb_priv != 0);
++
++ /* Check it has any SBs linked that needs to be freed*/
++ if(urb_priv->first_sb != NULL) {
++ struct USB_SB_Desc *next_sb, *first_sb, *last_sb;
++ int i = 0;
++ first_sb = urb_priv->first_sb;
++ last_sb = urb_priv->last_sb;
++ ASSERT(last_sb);
++ while(first_sb != last_sb) {
++ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next);
++ kmem_cache_free(usb_desc_cache, first_sb);
++ first_sb = next_sb;
++ i++;
++ }
++ kmem_cache_free(usb_desc_cache, last_sb);
++ i++;
++ }
++
++ /* Check if it has any EPs in its Intr pool that also needs to be freed */
++ if(urb_priv->intr_ep_pool_length > 0) {
++ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) {
++ kfree(urb_priv->intr_ep_pool[i]);
++ }
++ /*
++ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n",
++ urb_priv->intr_ep_pool_length, (unsigned int)urb);
++ */
++ }
++
++ kfree(urb_priv);
++ urb->hcpriv = NULL;
++}
++
++static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) {
++ struct crisv10_ep_priv *ep_priv;
++
++ ep_priv = kmalloc(sizeof *ep_priv, mem_flags);
++ if (!ep_priv)
++ return -ENOMEM;
++ memset(ep_priv, 0, sizeof *ep_priv);
++
++ ep->hcpriv = ep_priv;
++ return 0;
++}
++
++static void ep_priv_free(struct usb_host_endpoint *ep) {
++ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
++ ASSERT(ep_priv);
++ kfree(ep_priv);
++ ep->hcpriv = NULL;
++}
++
++/* EPID handling functions, managing EP-list in Etrax through wrappers */
++/* ------------------------------------------------------------------- */
++
++/* Sets up a new EPID for an endpoint or returns existing if found */
++//static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
++// int mem_flags) {
++static int tc_setup_epid(struct urb *urb, int mem_flags)
++{
++ int epid;
++ char devnum, endpoint, out_traffic, slow;
++ int maxlen;
++ __u32 epid_data;
++ struct usb_host_endpoint *ep = urb->ep;
++ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
++
++ DBFENTER;
++
++ /* Check if a valid epid already is setup for this endpoint */
++ if(ep_priv != NULL) {
++ return ep_priv->epid;
++ }
++
++ /* We must find and initiate a new epid for this urb. */
++ epid = tc_allocate_epid();
++
++ if (epid == -1) {
++ /* Failed to allocate a new epid. */
++ DBFEXIT;
++ return epid;
++ }
++
++ /* We now have a new epid to use. Claim it. */
++ epid_state[epid].inuse = 1;
++
++ /* Init private data for new endpoint */
++ if(ep_priv_create(ep, mem_flags) != 0) {
++ return -ENOMEM;
++ }
++ ep_priv = ep->hcpriv;
++ ep_priv->epid = epid;
++
++ devnum = usb_pipedevice(urb->pipe);
++ endpoint = usb_pipeendpoint(urb->pipe);
++ slow = (urb->dev->speed == USB_SPEED_LOW);
++ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
++
++ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
++ /* We want both IN and OUT control traffic to be put on the same
++ EP/SB list. */
++ out_traffic = 1;
++ } else {
++ out_traffic = usb_pipeout(urb->pipe);
++ }
++
++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) |
++ /* FIXME: Change any to the actual port? */
++ IO_STATE(R_USB_EPT_DATA_ISO, port, any) |
++ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) |
++ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) |
++ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum);
++ etrax_epid_iso_set(epid, epid_data);
++ } else {
++ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) |
++ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) |
++ /* FIXME: Change any to the actual port? */
++ IO_STATE(R_USB_EPT_DATA, port, any) |
++ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) |
++ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) |
++ IO_FIELD(R_USB_EPT_DATA, dev, devnum);
++ etrax_epid_set(epid, epid_data);
++ }
++
++ epid_state[epid].out_traffic = out_traffic;
++ epid_state[epid].type = usb_pipetype(urb->pipe);
++
++ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n",
++ (unsigned int)ep, epid, devnum, endpoint, maxlen,
++ str_type(urb->pipe), out_traffic ? "out" : "in",
++ slow ? "low" : "full");
++
++ /* Enable Isoc eof interrupt if we set up the first Isoc epid */
++ if(usb_pipeisoc(urb->pipe)) {
++ isoc_epid_counter++;
++ if(isoc_epid_counter == 1) {
++ isoc_warn("Enabled Isoc eof interrupt\n");
++ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
++ }
++ }
++
++ DBFEXIT;
++ return epid;
++}
++
++static void tc_free_epid(struct usb_host_endpoint *ep) {
++ unsigned long flags;
++ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
++ int epid;
++ volatile int timeout = 10000;
++
++ DBFENTER;
++
++ if (ep_priv == NULL) {
++ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep);
++ DBFEXIT;
++ return;
++ }
++
++ epid = ep_priv->epid;
++
++ /* Disable Isoc eof interrupt if we free the last Isoc epid */
++ if(epid_isoc(epid)) {
++ ASSERT(isoc_epid_counter > 0);
++ isoc_epid_counter--;
++ if(isoc_epid_counter == 0) {
++ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
++ isoc_warn("Disabled Isoc eof interrupt\n");
++ }
++ }
++
++ /* Take lock manualy instead of in epid_x_x wrappers,
++ because we need to be polling here */
++ spin_lock_irqsave(&etrax_epid_lock, flags);
++
++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
++ nop();
++ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) &&
++ (timeout-- > 0));
++ if(timeout == 0) {
++ warn("Timeout while waiting for epid:%d to drop hold\n", epid);
++ }
++ /* This will, among other things, set the valid field to 0. */
++ *R_USB_EPT_DATA = 0;
++ spin_unlock_irqrestore(&etrax_epid_lock, flags);
++
++ /* Free resource in software state info list */
++ epid_state[epid].inuse = 0;
++
++ /* Free private endpoint data */
++ ep_priv_free(ep);
++
++ DBFEXIT;
++}
++
++static int tc_allocate_epid(void) {
++ int i;
++ DBFENTER;
++ for (i = 0; i < NBR_OF_EPIDS; i++) {
++ if (!epid_inuse(i)) {
++ DBFEXIT;
++ return i;
++ }
++ }
++
++ tc_warn("Found no free epids\n");
++ DBFEXIT;
++ return -1;
++}
++
++
++/* Wrappers around the list functions (include/linux/list.h). */
++/* ---------------------------------------------------------- */
++static inline int __urb_list_empty(int epid) {
++ int retval;
++ retval = list_empty(&urb_list[epid]);
++ return retval;
++}
++
++/* Returns first urb for this epid, or NULL if list is empty. */
++static inline struct urb *urb_list_first(int epid) {
++ unsigned long flags;
++ struct urb *first_urb = 0;
++ spin_lock_irqsave(&urb_list_lock, flags);
++ if (!__urb_list_empty(epid)) {
++ /* Get the first urb (i.e. head->next). */
++ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list);
++ first_urb = urb_entry->urb;
++ }
++ spin_unlock_irqrestore(&urb_list_lock, flags);
++ return first_urb;
++}
++
++/* Adds an urb_entry last in the list for this epid. */
++static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) {
++ unsigned long flags;
++ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags);
++ ASSERT(urb_entry);
++
++ urb_entry->urb = urb;
++ spin_lock_irqsave(&urb_list_lock, flags);
++ list_add_tail(&urb_entry->list, &urb_list[epid]);
++ spin_unlock_irqrestore(&urb_list_lock, flags);
++}
++
++/* Search through the list for an element that contains this urb. (The list
++ is expected to be short and the one we are about to delete will often be
++ the first in the list.)
++ Should be protected by spin_locks in calling function */
++static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) {
++ struct list_head *entry;
++ struct list_head *tmp;
++ urb_entry_t *urb_entry;
++
++ list_for_each_safe(entry, tmp, &urb_list[epid]) {
++ urb_entry = list_entry(entry, urb_entry_t, list);
++ ASSERT(urb_entry);
++ ASSERT(urb_entry->urb);
++
++ if (urb_entry->urb == urb) {
++ return urb_entry;
++ }
++ }
++ return 0;
++}
++
++/* Same function as above but for global use. Protects list by spinlock */
++static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) {
++ unsigned long flags;
++ urb_entry_t *urb_entry;
++ spin_lock_irqsave(&urb_list_lock, flags);
++ urb_entry = __urb_list_entry(urb, epid);
++ spin_unlock_irqrestore(&urb_list_lock, flags);
++ return (urb_entry);
++}
++
++/* Delete an urb from the list. */
++static inline void urb_list_del(struct urb *urb, int epid) {
++ unsigned long flags;
++ urb_entry_t *urb_entry;
++
++ /* Delete entry and free. */
++ spin_lock_irqsave(&urb_list_lock, flags);
++ urb_entry = __urb_list_entry(urb, epid);
++ ASSERT(urb_entry);
++
++ list_del(&urb_entry->list);
++ spin_unlock_irqrestore(&urb_list_lock, flags);
++ kfree(urb_entry);
++}
++
++/* Move an urb to the end of the list. */
++static inline void urb_list_move_last(struct urb *urb, int epid) {
++ unsigned long flags;
++ urb_entry_t *urb_entry;
++
++ spin_lock_irqsave(&urb_list_lock, flags);
++ urb_entry = __urb_list_entry(urb, epid);
++ ASSERT(urb_entry);
++
++ list_del(&urb_entry->list);
++ list_add_tail(&urb_entry->list, &urb_list[epid]);
++ spin_unlock_irqrestore(&urb_list_lock, flags);
++}
++
++/* Get the next urb in the list. */
++static inline struct urb *urb_list_next(struct urb *urb, int epid) {
++ unsigned long flags;
++ urb_entry_t *urb_entry;
++
++ spin_lock_irqsave(&urb_list_lock, flags);
++ urb_entry = __urb_list_entry(urb, epid);
++ ASSERT(urb_entry);
++
++ if (urb_entry->list.next != &urb_list[epid]) {
++ struct list_head *elem = urb_entry->list.next;
++ urb_entry = list_entry(elem, urb_entry_t, list);
++ spin_unlock_irqrestore(&urb_list_lock, flags);
++ return urb_entry->urb;
++ } else {
++ spin_unlock_irqrestore(&urb_list_lock, flags);
++ return NULL;
++ }
++}
++
++struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc,
++ int mem_flags) {
++ struct USB_EP_Desc *ep_desc;
++ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags);
++ if(ep_desc == NULL)
++ return NULL;
++ memset(ep_desc, 0, sizeof(struct USB_EP_Desc));
++
++ ep_desc->hw_len = 0;
++ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) |
++ IO_STATE(USB_EP_command, enable, yes));
++ if(sb_desc == NULL) {
++ ep_desc->sub = 0;
++ } else {
++ ep_desc->sub = virt_to_phys(sb_desc);
++ }
++ return ep_desc;
++}
++
++#define TT_ZOUT 0
++#define TT_IN 1
++#define TT_OUT 2
++#define TT_SETUP 3
++
++#define CMD_EOL IO_STATE(USB_SB_command, eol, yes)
++#define CMD_INTR IO_STATE(USB_SB_command, intr, yes)
++#define CMD_FULL IO_STATE(USB_SB_command, full, yes)
++
++/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT
++ SBs. Also used by create_sb_in() to avoid same allocation procedure at two
++ places */
++struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data,
++ int datalen, int mem_flags) {
++ struct USB_SB_Desc *sb_desc;
++ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
++ if(sb_desc == NULL)
++ return NULL;
++ memset(sb_desc, 0, sizeof(struct USB_SB_Desc));
++
++ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) |
++ IO_STATE(USB_SB_command, eot, yes);
++
++ sb_desc->sw_len = datalen;
++ if(data != NULL) {
++ sb_desc->buf = virt_to_phys(data);
++ } else {
++ sb_desc->buf = 0;
++ }
++ if(sb_prev != NULL) {
++ sb_prev->next = virt_to_phys(sb_desc);
++ }
++ return sb_desc;
++}
++
++/* Creates a copy of an existing SB by allocation space for it and copy
++ settings */
++struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) {
++ struct USB_SB_Desc *sb_desc;
++ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
++ if(sb_desc == NULL)
++ return NULL;
++
++ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc));
++ return sb_desc;
++}
++
++/* A specific create_sb function for creation of in SBs. This is due to
++ that datalen in In SBs shows how many packets we are expecting. It also
++ sets up the rem field to show if how many bytes we expect in last packet
++ if it's not a full one */
++struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen,
++ int maxlen, int mem_flags) {
++ struct USB_SB_Desc *sb_desc;
++ sb_desc = create_sb(sb_prev, TT_IN, NULL,
++ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags);
++ if(sb_desc == NULL)
++ return NULL;
++ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen);
++ return sb_desc;
++}
++
++void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) {
++ sb_desc->command |= flags;
++}
++
++int create_sb_for_urb(struct urb *urb, int mem_flags) {
++ int is_out = !usb_pipein(urb->pipe);
++ int type = usb_pipetype(urb->pipe);
++ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out);
++ int buf_len = urb->transfer_buffer_length;
++ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL;
++ struct USB_SB_Desc *sb_desc = NULL;
++
++ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ ASSERT(urb_priv != NULL);
++
++ switch(type) {
++ case PIPE_CONTROL:
++ /* Setup stage */
++ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++ set_sb_cmds(sb_desc, CMD_FULL);
++
++ /* Attach first SB to URB */
++ urb_priv->first_sb = sb_desc;
++
++ if (is_out) { /* Out Control URB */
++ /* If this Control OUT transfer has an optional data stage we add
++ an OUT token before the mandatory IN (status) token */
++ if ((buf_len > 0) && buf) {
++ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++ set_sb_cmds(sb_desc, CMD_FULL);
++ }
++
++ /* Status stage */
++ /* The data length has to be exactly 1. This is due to a requirement
++ of the USB specification that a host must be prepared to receive
++ data in the status phase */
++ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++ } else { /* In control URB */
++ /* Data stage */
++ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++
++ /* Status stage */
++ /* Read comment at zout_buffer declaration for an explanation to this. */
++ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++ /* Set descriptor interrupt flag for in URBs so we can finish URB after
++ zout-packet has been sent */
++ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL);
++ }
++ /* Set end-of-list flag in last SB */
++ set_sb_cmds(sb_desc, CMD_EOL);
++ /* Attach last SB to URB */
++ urb_priv->last_sb = sb_desc;
++ break;
++
++ case PIPE_BULK:
++ if (is_out) { /* Out Bulk URB */
++ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++ /* The full field is set to yes, even if we don't actually check that
++ this is a full-length transfer (i.e., that transfer_buffer_length %
++ maxlen = 0).
++ Setting full prevents the USB controller from sending an empty packet
++ in that case. However, if URB_ZERO_PACKET was set we want that. */
++ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
++ set_sb_cmds(sb_desc, CMD_FULL);
++ }
++ } else { /* In Bulk URB */
++ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++ }
++ /* Set end-of-list flag for last SB */
++ set_sb_cmds(sb_desc, CMD_EOL);
++
++ /* Attach SB to URB */
++ urb_priv->first_sb = sb_desc;
++ urb_priv->last_sb = sb_desc;
++ break;
++
++ case PIPE_INTERRUPT:
++ if(is_out) { /* Out Intr URB */
++ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++
++ /* The full field is set to yes, even if we don't actually check that
++ this is a full-length transfer (i.e., that transfer_buffer_length %
++ maxlen = 0).
++ Setting full prevents the USB controller from sending an empty packet
++ in that case. However, if URB_ZERO_PACKET was set we want that. */
++ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
++ set_sb_cmds(sb_desc, CMD_FULL);
++ }
++ /* Only generate TX interrupt if it's a Out URB*/
++ set_sb_cmds(sb_desc, CMD_INTR);
++
++ } else { /* In Intr URB */
++ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++ }
++ /* Set end-of-list flag for last SB */
++ set_sb_cmds(sb_desc, CMD_EOL);
++
++ /* Attach SB to URB */
++ urb_priv->first_sb = sb_desc;
++ urb_priv->last_sb = sb_desc;
++
++ break;
++ case PIPE_ISOCHRONOUS:
++ if(is_out) { /* Out Isoc URB */
++ int i;
++ if(urb->number_of_packets == 0) {
++ tc_err("Can't create SBs for Isoc URB with zero packets\n");
++ return -EPIPE;
++ }
++ /* Create one SB descriptor for each packet and link them together. */
++ for(i = 0; i < urb->number_of_packets; i++) {
++ if (urb->iso_frame_desc[i].length > 0) {
++
++ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer +
++ urb->iso_frame_desc[i].offset,
++ urb->iso_frame_desc[i].length, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++
++ /* Check if it's a full length packet */
++ if (urb->iso_frame_desc[i].length ==
++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
++ set_sb_cmds(sb_desc, CMD_FULL);
++ }
++
++ } else { /* zero length packet */
++ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++ set_sb_cmds(sb_desc, CMD_FULL);
++ }
++ /* Attach first SB descriptor to URB */
++ if (i == 0) {
++ urb_priv->first_sb = sb_desc;
++ }
++ }
++ /* Set interrupt and end-of-list flags in last SB */
++ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL);
++ /* Attach last SB descriptor to URB */
++ urb_priv->last_sb = sb_desc;
++ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n",
++ urb->number_of_packets, (unsigned int)urb);
++ } else { /* In Isoc URB */
++ /* Actual number of packets is not relevant for periodic in traffic as
++ long as it is more than zero. Set to 1 always. */
++ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
++ if(sb_desc == NULL)
++ return -ENOMEM;
++ /* Set end-of-list flags for SB */
++ set_sb_cmds(sb_desc, CMD_EOL);
++
++ /* Attach SB to URB */
++ urb_priv->first_sb = sb_desc;
++ urb_priv->last_sb = sb_desc;
++ }
++ break;
++ default:
++ tc_err("Unknown pipe-type\n");
++ return -EPIPE;
++ break;
++ }
++ return 0;
++}
++
++int init_intr_urb(struct urb *urb, int mem_flags) {
++ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ struct USB_EP_Desc* ep_desc;
++ int interval;
++ int i;
++ int ep_count;
++
++ ASSERT(urb_priv != NULL);
++ ASSERT(usb_pipeint(urb->pipe));
++ /* We can't support interval longer than amount of eof descriptors in
++ TxIntrEPList */
++ if(urb->interval > MAX_INTR_INTERVAL) {
++ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval,
++ MAX_INTR_INTERVAL);
++ return -EINVAL;
++ }
++
++ /* We assume that the SB descriptors already have been setup */
++ ASSERT(urb_priv->first_sb != NULL);
++
++ /* Round of the interval to 2^n, it is obvious that this code favours
++ smaller numbers, but that is actually a good thing */
++ /* FIXME: The "rounding error" for larger intervals will be quite
++ large. For in traffic this shouldn't be a problem since it will only
++ mean that we "poll" more often. */
++ interval = urb->interval;
++ for (i = 0; interval; i++) {
++ interval = interval >> 1;
++ }
++ urb_priv->interval = 1 << (i - 1);
++
++ /* We can only have max interval for Out Interrupt due to that we can only
++ handle one linked in EP for a certain epid in the Intr descr array at the
++ time. The USB Controller in the Etrax 100LX continues to process Intr EPs
++ so we have no way of knowing which one that caused the actual transfer if
++ we have several linked in. */
++ if(usb_pipeout(urb->pipe)) {
++ urb_priv->interval = MAX_INTR_INTERVAL;
++ }
++
++ /* Calculate amount of EPs needed */
++ ep_count = MAX_INTR_INTERVAL / urb_priv->interval;
++
++ for(i = 0; i < ep_count; i++) {
++ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags);
++ if(ep_desc == NULL) {
++ /* Free any descriptors that we may have allocated before failure */
++ while(i > 0) {
++ i--;
++ kfree(urb_priv->intr_ep_pool[i]);
++ }
++ return -ENOMEM;
++ }
++ urb_priv->intr_ep_pool[i] = ep_desc;
++ }
++ urb_priv->intr_ep_pool_length = ep_count;
++ return 0;
++}
++
++/* DMA RX/TX functions */
++/* ----------------------- */
++
++static void tc_dma_init_rx_list(void) {
++ int i;
++
++ /* Setup descriptor list except last one */
++ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) {
++ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
++ RxDescList[i].command = 0;
++ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]);
++ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
++ RxDescList[i].hw_len = 0;
++ RxDescList[i].status = 0;
++
++ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as
++ USB_IN_Desc for the relevant fields.) */
++ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]);
++
++ }
++ /* Special handling of last descriptor */
++ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
++ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes);
++ RxDescList[i].next = virt_to_phys(&RxDescList[0]);
++ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
++ RxDescList[i].hw_len = 0;
++ RxDescList[i].status = 0;
++
++ /* Setup list pointers that show progress in list */
++ myNextRxDesc = &RxDescList[0];
++ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
++
++ flush_etrax_cache();
++ /* Point DMA to first descriptor in list and start it */
++ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc);
++ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start);
++}
++
++
++static void tc_dma_init_tx_bulk_list(void) {
++ int i;
++ volatile struct USB_EP_Desc *epDescr;
++
++ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
++ epDescr = &(TxBulkEPList[i]);
++ CHECK_ALIGN(epDescr);
++ epDescr->hw_len = 0;
++ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
++ epDescr->sub = 0;
++ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]);
++
++ /* Initiate two EPs, disabled and with the eol flag set. No need for any
++ preserved epid. */
++
++ /* The first one has the intr flag set so we get an interrupt when the DMA
++ channel is about to become disabled. */
++ CHECK_ALIGN(&TxBulkDummyEPList[i][0]);
++ TxBulkDummyEPList[i][0].hw_len = 0;
++ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
++ IO_STATE(USB_EP_command, eol, yes) |
++ IO_STATE(USB_EP_command, intr, yes));
++ TxBulkDummyEPList[i][0].sub = 0;
++ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]);
++
++ /* The second one. */
++ CHECK_ALIGN(&TxBulkDummyEPList[i][1]);
++ TxBulkDummyEPList[i][1].hw_len = 0;
++ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
++ IO_STATE(USB_EP_command, eol, yes));
++ TxBulkDummyEPList[i][1].sub = 0;
++ /* The last dummy's next pointer is the same as the current EP's next pointer. */
++ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]);
++ }
++
++ /* Special handling of last descr in list, make list circular */
++ epDescr = &TxBulkEPList[i];
++ CHECK_ALIGN(epDescr);
++ epDescr->hw_len = 0;
++ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
++ IO_FIELD(USB_EP_command, epid, i);
++ epDescr->sub = 0;
++ epDescr->next = virt_to_phys(&TxBulkEPList[0]);
++
++ /* Init DMA sub-channel pointers to last item in each list */
++ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]);
++ /* No point in starting the bulk channel yet.
++ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
++}
++
++static void tc_dma_init_tx_ctrl_list(void) {
++ int i;
++ volatile struct USB_EP_Desc *epDescr;
++
++ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
++ epDescr = &(TxCtrlEPList[i]);
++ CHECK_ALIGN(epDescr);
++ epDescr->hw_len = 0;
++ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
++ epDescr->sub = 0;
++ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]);
++ }
++ /* Special handling of last descr in list, make list circular */
++ epDescr = &TxCtrlEPList[i];
++ CHECK_ALIGN(epDescr);
++ epDescr->hw_len = 0;
++ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
++ IO_FIELD(USB_EP_command, epid, i);
++ epDescr->sub = 0;
++ epDescr->next = virt_to_phys(&TxCtrlEPList[0]);
++
++ /* Init DMA sub-channel pointers to last item in each list */
++ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]);
++ /* No point in starting the ctrl channel yet.
++ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
++}
++
++
++static void tc_dma_init_tx_intr_list(void) {
++ int i;
++
++ TxIntrSB_zout.sw_len = 1;
++ TxIntrSB_zout.next = 0;
++ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]);
++ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
++ IO_STATE(USB_SB_command, tt, zout) |
++ IO_STATE(USB_SB_command, full, yes) |
++ IO_STATE(USB_SB_command, eot, yes) |
++ IO_STATE(USB_SB_command, eol, yes));
++
++ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) {
++ CHECK_ALIGN(&TxIntrEPList[i]);
++ TxIntrEPList[i].hw_len = 0;
++ TxIntrEPList[i].command =
++ (IO_STATE(USB_EP_command, eof, yes) |
++ IO_STATE(USB_EP_command, enable, yes) |
++ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
++ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
++ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]);
++ }
++
++ /* Special handling of last descr in list, make list circular */
++ CHECK_ALIGN(&TxIntrEPList[i]);
++ TxIntrEPList[i].hw_len = 0;
++ TxIntrEPList[i].command =
++ (IO_STATE(USB_EP_command, eof, yes) |
++ IO_STATE(USB_EP_command, eol, yes) |
++ IO_STATE(USB_EP_command, enable, yes) |
++ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
++ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
++ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]);
++
++ intr_dbg("Initiated Intr EP descriptor list\n");
++
++
++ /* Connect DMA 8 sub-channel 2 to first in list */
++ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]);
++}
++
++static void tc_dma_init_tx_isoc_list(void) {
++ int i;
++
++ DBFENTER;
++
++ /* Read comment at zout_buffer declaration for an explanation to this. */
++ TxIsocSB_zout.sw_len = 1;
++ TxIsocSB_zout.next = 0;
++ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]);
++ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
++ IO_STATE(USB_SB_command, tt, zout) |
++ IO_STATE(USB_SB_command, full, yes) |
++ IO_STATE(USB_SB_command, eot, yes) |
++ IO_STATE(USB_SB_command, eol, yes));
++
++ /* The last isochronous EP descriptor is a dummy. */
++ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
++ CHECK_ALIGN(&TxIsocEPList[i]);
++ TxIsocEPList[i].hw_len = 0;
++ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
++ TxIsocEPList[i].sub = 0;
++ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]);
++ }
++
++ CHECK_ALIGN(&TxIsocEPList[i]);
++ TxIsocEPList[i].hw_len = 0;
++
++ /* Must enable the last EP descr to get eof interrupt. */
++ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) |
++ IO_STATE(USB_EP_command, eof, yes) |
++ IO_STATE(USB_EP_command, eol, yes) |
++ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
++ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout);
++ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]);
++
++ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]);
++ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
++}
++
++static int tc_dma_init(struct usb_hcd *hcd) {
++ tc_dma_init_rx_list();
++ tc_dma_init_tx_bulk_list();
++ tc_dma_init_tx_ctrl_list();
++ tc_dma_init_tx_intr_list();
++ tc_dma_init_tx_isoc_list();
++
++ if (cris_request_dma(USB_TX_DMA_NBR,
++ "ETRAX 100LX built-in USB (Tx)",
++ DMA_VERBOSE_ON_ERROR,
++ dma_usb)) {
++ err("Could not allocate DMA ch 8 for USB");
++ return -EBUSY;
++ }
++
++ if (cris_request_dma(USB_RX_DMA_NBR,
++ "ETRAX 100LX built-in USB (Rx)",
++ DMA_VERBOSE_ON_ERROR,
++ dma_usb)) {
++ err("Could not allocate DMA ch 9 for USB");
++ return -EBUSY;
++ }
++
++ *R_IRQ_MASK2_SET =
++ /* Note that these interrupts are not used. */
++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) |
++ /* Sub channel 1 (ctrl) descr. interrupts are used. */
++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) |
++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) |
++ /* Sub channel 3 (isoc) descr. interrupts are used. */
++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set);
++
++ /* Note that the dma9_descr interrupt is not used. */
++ *R_IRQ_MASK2_SET =
++ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) |
++ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
++
++ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0,
++ "ETRAX 100LX built-in USB (Rx)", hcd)) {
++ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ);
++ return -EBUSY;
++ }
++
++ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0,
++ "ETRAX 100LX built-in USB (Tx)", hcd)) {
++ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ);
++ return -EBUSY;
++ }
++
++ return 0;
++}
++
++static void tc_dma_destroy(void) {
++ free_irq(ETRAX_USB_RX_IRQ, NULL);
++ free_irq(ETRAX_USB_TX_IRQ, NULL);
++
++ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)");
++ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)");
++
++}
++
++static void tc_dma_link_intr_urb(struct urb *urb);
++
++/* Handle processing of Bulk, Ctrl and Intr queues */
++static void tc_dma_process_queue(int epid) {
++ struct urb *urb;
++ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
++ unsigned long flags;
++ char toggle;
++
++ if(epid_state[epid].disabled) {
++ /* Don't process any URBs on a disabled endpoint */
++ return;
++ }
++
++ /* Do not disturb us while fiddling with EPs and epids */
++ local_irq_save(flags);
++
++ /* For bulk, Ctrl and Intr can we only have one URB active at a time for
++ a specific EP. */
++ if(activeUrbList[epid] != NULL) {
++ /* An URB is already active on EP, skip checking queue */
++ local_irq_restore(flags);
++ return;
++ }
++
++ urb = urb_list_first(epid);
++ if(urb == NULL) {
++ /* No URB waiting in EP queue. Nothing do to */
++ local_irq_restore(flags);
++ return;
++ }
++
++ urb_priv = urb->hcpriv;
++ ASSERT(urb_priv != NULL);
++ ASSERT(urb_priv->urb_state == NOT_STARTED);
++ ASSERT(!usb_pipeisoc(urb->pipe));
++
++ /* Remove this URB from the queue and move it to active */
++ activeUrbList[epid] = urb;
++ urb_list_del(urb, epid);
++
++ urb_priv->urb_state = STARTED;
++
++ /* Reset error counters (regardless of which direction this traffic is). */
++ etrax_epid_clear_error(epid);
++
++ /* Special handling of Intr EP lists */
++ if(usb_pipeint(urb->pipe)) {
++ tc_dma_link_intr_urb(urb);
++ local_irq_restore(flags);
++ return;
++ }
++
++ /* Software must preset the toggle bits for Bulk and Ctrl */
++ if(usb_pipecontrol(urb->pipe)) {
++ /* Toggle bits are initialized only during setup transaction in a
++ CTRL transfer */
++ etrax_epid_set_toggle(epid, 0, 0);
++ etrax_epid_set_toggle(epid, 1, 0);
++ } else {
++ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
++ usb_pipeout(urb->pipe));
++ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle);
++ }
++
++ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n",
++ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid,
++ sblist_to_str(urb_priv->first_sb));
++
++ /* We start the DMA sub channel without checking if it's running or not,
++ because:
++ 1) If it's already running, issuing the start command is a nop.
++ 2) We avoid a test-and-set race condition. */
++ switch(usb_pipetype(urb->pipe)) {
++ case PIPE_BULK:
++ /* Assert that the EP descriptor is disabled. */
++ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
++
++ /* Set up and enable the EP descriptor. */
++ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
++ TxBulkEPList[epid].hw_len = 0;
++ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
++
++ /* Check if the dummy list is already with us (if several urbs were queued). */
++ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) {
++ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d",
++ (unsigned long)urb, epid);
++
++ /* We don't need to check if the DMA is at this EP or not before changing the
++ next pointer, since we will do it in one 32-bit write (EP descriptors are
++ 32-bit aligned). */
++ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]);
++ }
++
++ restart_dma8_sub0();
++
++ /* Update/restart the bulk start timer since we just started the channel.*/
++ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
++ /* Update/restart the bulk eot timer since we just inserted traffic. */
++ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
++ break;
++ case PIPE_CONTROL:
++ /* Assert that the EP descriptor is disabled. */
++ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
++
++ /* Set up and enable the EP descriptor. */
++ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
++ TxCtrlEPList[epid].hw_len = 0;
++ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
++
++ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
++ break;
++ }
++ local_irq_restore(flags);
++}
++
++static void tc_dma_link_intr_urb(struct urb *urb) {
++ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
++ volatile struct USB_EP_Desc *tmp_ep;
++ struct USB_EP_Desc *ep_desc;
++ int i = 0, epid;
++ int pool_idx = 0;
++
++ ASSERT(urb_priv != NULL);
++ epid = urb_priv->epid;
++ ASSERT(urb_priv->interval > 0);
++ ASSERT(urb_priv->intr_ep_pool_length > 0);
++
++ tmp_ep = &TxIntrEPList[0];
++
++ /* Only insert one EP descriptor in list for Out Intr URBs.
++ We can only handle Out Intr with interval of 128ms because
++ it's not possible to insert several Out Intr EPs because they
++ are not consumed by the DMA. */
++ if(usb_pipeout(urb->pipe)) {
++ ep_desc = urb_priv->intr_ep_pool[0];
++ ASSERT(ep_desc);
++ ep_desc->next = tmp_ep->next;
++ tmp_ep->next = virt_to_phys(ep_desc);
++ i++;
++ } else {
++ /* Loop through Intr EP descriptor list and insert EP for URB at
++ specified interval */
++ do {
++ /* Each EP descriptor with eof flag sat signals a new frame */
++ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) {
++ /* Insert a EP from URBs EP pool at correct interval */
++ if ((i % urb_priv->interval) == 0) {
++ ep_desc = urb_priv->intr_ep_pool[pool_idx];
++ ASSERT(ep_desc);
++ ep_desc->next = tmp_ep->next;
++ tmp_ep->next = virt_to_phys(ep_desc);
++ pool_idx++;
++ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length);
++ }
++ i++;
++ }
++ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next);
++ } while(tmp_ep != &TxIntrEPList[0]);
++ }
++
++ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid,
++ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx);
++
++ /* We start the DMA sub channel without checking if it's running or not,
++ because:
++ 1) If it's already running, issuing the start command is a nop.
++ 2) We avoid a test-and-set race condition. */
++ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
++}
++
++ /* hinko ignore usb_pipeisoc */
++#if 0
++static void tc_dma_process_isoc_urb(struct urb *urb) {
++ unsigned long flags;
++ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
++ int epid;
++
++ /* Do not disturb us while fiddling with EPs and epids */
++ local_irq_save(flags);
++
++ ASSERT(urb_priv);
++ ASSERT(urb_priv->first_sb);
++ epid = urb_priv->epid;
++
++ if(activeUrbList[epid] == NULL) {
++ /* EP is idle, so make this URB active */
++ activeUrbList[epid] = urb;
++ urb_list_del(urb, epid);
++ ASSERT(TxIsocEPList[epid].sub == 0);
++ ASSERT(!(TxIsocEPList[epid].command &
++ IO_STATE(USB_EP_command, enable, yes)));
++
++ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/
++ if(usb_pipein(urb->pipe)) {
++ /* Each EP for In Isoc will have only one SB descriptor, setup when
++ submitting the first active urb. We do it here by copying from URBs
++ pre-allocated SB. */
++ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb,
++ sizeof(TxIsocSBList[epid]));
++ TxIsocEPList[epid].hw_len = 0;
++ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid]));
++ } else {
++ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */
++ TxIsocEPList[epid].hw_len = 0;
++ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
++
++ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x"
++ " last_sb::0x%x\n",
++ (unsigned int)urb, urb_priv->urb_num, epid,
++ (unsigned int)(urb_priv->first_sb),
++ (unsigned int)(urb_priv->last_sb));
++ }
++
++ if (urb->transfer_flags & URB_ISO_ASAP) {
++ /* The isoc transfer should be started as soon as possible. The
++ start_frame field is a return value if URB_ISO_ASAP was set. Comparing
++ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN
++ token is sent 2 frames later. I'm not sure how this affects usage of
++ the start_frame field by the device driver, or how it affects things
++ when USB_ISO_ASAP is not set, so therefore there's no compensation for
++ the 2 frame "lag" here. */
++ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
++ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
++ urb_priv->urb_state = STARTED;
++ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n",
++ urb->start_frame);
++ } else {
++ /* Not started yet. */
++ urb_priv->urb_state = NOT_STARTED;
++ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n",
++ (unsigned int)urb);
++ }
++
++ } else {
++ /* An URB is already active on the EP. Leave URB in queue and let
++ finish_isoc_urb process it after current active URB */
++ ASSERT(TxIsocEPList[epid].sub != 0);
++
++ if(usb_pipein(urb->pipe)) {
++ /* Because there already is a active In URB on this epid we do nothing
++ and the finish_isoc_urb() function will handle switching to next URB*/
++
++ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */
++ struct USB_SB_Desc *temp_sb_desc;
++
++ /* Set state STARTED to all Out Isoc URBs added to SB list because we
++ don't know how many of them that are finished before descr interrupt*/
++ urb_priv->urb_state = STARTED;
++
++ /* Find end of current SB list by looking for SB with eol flag sat */
++ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
++ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) !=
++ IO_STATE(USB_SB_command, eol, yes)) {
++ ASSERT(temp_sb_desc->next);
++ temp_sb_desc = phys_to_virt(temp_sb_desc->next);
++ }
++
++ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d"
++ " sub:0x%x eol:0x%x\n",
++ (unsigned int)urb, urb_priv->urb_num,
++ (unsigned int)(urb_priv->first_sb),
++ (unsigned int)(urb_priv->last_sb), epid,
++ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
++ (unsigned int)temp_sb_desc);
++
++ /* Next pointer must be set before eol is removed. */
++ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb);
++ /* Clear the previous end of list flag since there is a new in the
++ added SB descriptor list. */
++ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol);
++
++ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
++ __u32 epid_data;
++ /* 8.8.5 in Designer's Reference says we should check for and correct
++ any errors in the EP here. That should not be necessary if
++ epid_attn is handled correctly, so we assume all is ok. */
++ epid_data = etrax_epid_iso_get(epid);
++ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) !=
++ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
++ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending"
++ " URB:0x%x[%d]\n",
++ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid,
++ (unsigned int)urb, urb_priv->urb_num);
++ }
++
++ /* The SB list was exhausted. */
++ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) {
++ /* The new sublist did not get processed before the EP was
++ disabled. Setup the EP again. */
++
++ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) {
++ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted"
++ ", restarting from this URBs SB:0x%x\n",
++ epid, (unsigned int)temp_sb_desc,
++ (unsigned int)(urb_priv->first_sb));
++ TxIsocEPList[epid].hw_len = 0;
++ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
++ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
++ /* Enable the EP again so data gets processed this time */
++ TxIsocEPList[epid].command |=
++ IO_STATE(USB_EP_command, enable, yes);
++
++ } else {
++ /* The EP has been disabled but not at end this URB (god knows
++ where). This should generate an epid_attn so we should not be
++ here */
++ isoc_warn("EP was disabled on sb:0x%x before SB list for"
++ " URB:0x%x[%d] got processed\n",
++ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
++ (unsigned int)urb, urb_priv->urb_num);
++ }
++ } else {
++ /* This might happend if we are slow on this function and isn't
++ an error. */
++ isoc_dbg("EP was disabled and finished with SBs from appended"
++ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num);
++ }
++ }
++ }
++ }
++
++ /* Start the DMA sub channel */
++ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
++
++ local_irq_restore(flags);
++}
++#endif
++
++static void tc_dma_unlink_intr_urb(struct urb *urb) {
++ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
++ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
++ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
++ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
++ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from
++ the list. */
++ int count = 0;
++ volatile int timeout = 10000;
++ int epid;
++
++ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the
++ List". */
++ ASSERT(urb_priv);
++ ASSERT(urb_priv->intr_ep_pool_length > 0);
++ epid = urb_priv->epid;
++
++ /* First disable all Intr EPs belonging to epid for this URB */
++ first_ep = &TxIntrEPList[0];
++ curr_ep = first_ep;
++ do {
++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
++ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
++ /* Disable EP */
++ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
++ }
++ curr_ep = phys_to_virt(curr_ep->next);
++ } while (curr_ep != first_ep);
++
++
++ /* Now unlink all EPs belonging to this epid from Descr list */
++ first_ep = &TxIntrEPList[0];
++ curr_ep = first_ep;
++ do {
++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
++ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
++ /* This is the one we should unlink. */
++ unlink_ep = next_ep;
++
++ /* Actually unlink the EP from the DMA list. */
++ curr_ep->next = unlink_ep->next;
++
++ /* Wait until the DMA is no longer at this descriptor. */
++ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) &&
++ (timeout-- > 0));
++ if(timeout == 0) {
++ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n");
++ }
++
++ count++;
++ }
++ curr_ep = phys_to_virt(curr_ep->next);
++ } while (curr_ep != first_ep);
++
++ if(count != urb_priv->intr_ep_pool_length) {
++ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count,
++ urb_priv->intr_ep_pool_length, (unsigned int)urb,
++ urb_priv->urb_num);
++ } else {
++ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count,
++ urb_priv->intr_ep_pool_length, (unsigned int)urb);
++ }
++}
++
++static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
++ int timer) {
++ unsigned long flags;
++ int epid;
++ struct urb *urb;
++ struct crisv10_urb_priv * urb_priv;
++ __u32 epid_data;
++
++ /* Protect TxEPList */
++ local_irq_save(flags);
++
++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
++ /* A finished EP descriptor is disabled and has a valid sub pointer */
++ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
++ (TxBulkEPList[epid].sub != 0)) {
++
++ /* Get the active URB for this epid */
++ urb = activeUrbList[epid];
++ /* Sanity checks */
++ ASSERT(urb);
++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ ASSERT(urb_priv);
++
++ /* Only handle finished out Bulk EPs here,
++ and let RX interrupt take care of the rest */
++ if(!epid_out_traffic(epid)) {
++ continue;
++ }
++
++ if(timer) {
++ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n",
++ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
++ urb_priv->urb_num);
++ } else {
++ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n",
++ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
++ urb_priv->urb_num);
++ }
++
++ if(urb_priv->urb_state == UNLINK) {
++ /* This Bulk URB is requested to be unlinked, that means that the EP
++ has been disabled and we might not have sent all data */
++ tc_finish_urb(hcd, urb, urb->status);
++ continue;
++ }
++
++ ASSERT(urb_priv->urb_state == STARTED);
++ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) {
++ tc_err("Endpoint got disabled before reaching last sb\n");
++ }
++
++ epid_data = etrax_epid_get(epid);
++ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
++ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
++ /* This means that the endpoint has no error, is disabled
++ and had inserted traffic, i.e. transfer successfully completed. */
++ tc_finish_urb(hcd, urb, 0);
++ } else {
++ /* Shouldn't happen. We expect errors to be caught by epid
++ attention. */
++ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n",
++ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
++ }
++ } else {
++ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid);
++ }
++ }
++
++ local_irq_restore(flags);
++}
++
++static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) {
++ unsigned long flags;
++ int epid;
++ struct urb *urb;
++ struct crisv10_urb_priv * urb_priv;
++ __u32 epid_data;
++
++ /* Protect TxEPList */
++ local_irq_save(flags);
++
++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
++ if(epid == DUMMY_EPID)
++ continue;
++
++ /* A finished EP descriptor is disabled and has a valid sub pointer */
++ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
++ (TxCtrlEPList[epid].sub != 0)) {
++
++ /* Get the active URB for this epid */
++ urb = activeUrbList[epid];
++
++ if(urb == NULL) {
++ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid);
++ continue;
++ }
++
++ /* Sanity checks */
++ ASSERT(usb_pipein(urb->pipe));
++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ ASSERT(urb_priv);
++ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) {
++ tc_err("Endpoint got disabled before reaching last sb\n");
++ }
++
++ epid_data = etrax_epid_get(epid);
++ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
++ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
++ /* This means that the endpoint has no error, is disabled
++ and had inserted traffic, i.e. transfer successfully completed. */
++
++ /* Check if RX-interrupt for In Ctrl has been processed before
++ finishing the URB */
++ if(urb_priv->ctrl_rx_done) {
++ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n",
++ (unsigned int)urb, urb_priv->urb_num);
++ tc_finish_urb(hcd, urb, 0);
++ } else {
++ /* If we get zout descriptor interrupt before RX was done for a
++ In Ctrl transfer, then we flag that and it will be finished
++ in the RX-Interrupt */
++ urb_priv->ctrl_zout_done = 1;
++ tc_dbg("Got zout descr interrupt before RX interrupt\n");
++ }
++ } else {
++ /* Shouldn't happen. We expect errors to be caught by epid
++ attention. */
++ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
++ __dump_ep_desc(&(TxCtrlEPList[epid]));
++ __dump_ept_data(epid);
++ }
++ }
++ }
++ local_irq_restore(flags);
++}
++
++ /* hinko ignore usb_pipeisoc */
++#if 0
++/* This function goes through all epids that are setup for Out Isoc transfers
++ and marks (isoc_out_done) all queued URBs that the DMA has finished
++ transfer for.
++ No URB completetion is done here to make interrupt routine return quickly.
++ URBs are completed later with help of complete_isoc_bottom_half() that
++ becomes schedules when this functions is finished. */
++static void check_finished_isoc_tx_epids(void) {
++ unsigned long flags;
++ int epid;
++ struct urb *urb;
++ struct crisv10_urb_priv * urb_priv;
++ struct USB_SB_Desc* sb_desc;
++ int epid_done;
++
++ /* Protect TxIsocEPList */
++ local_irq_save(flags);
++
++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
++ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID ||
++ !epid_out_traffic(epid)) {
++ /* Nothing here to see. */
++ continue;
++ }
++ ASSERT(epid_inuse(epid));
++ ASSERT(epid_isoc(epid));
++
++ sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
++ /* Find the last descriptor of the currently active URB for this ep.
++ This is the first descriptor in the sub list marked for a descriptor
++ interrupt. */
++ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) {
++ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0;
++ }
++ ASSERT(sb_desc);
++
++ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n",
++ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
++ (unsigned int)sb_desc);
++
++ urb = activeUrbList[epid];
++ if(urb == NULL) {
++ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid);
++ continue;
++ }
++
++ epid_done = 0;
++ while(urb && !epid_done) {
++ /* Sanity check. */
++ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
++ ASSERT(usb_pipeout(urb->pipe));
++
++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ ASSERT(urb_priv);
++ ASSERT(urb_priv->urb_state == STARTED ||
++ urb_priv->urb_state == UNLINK);
++
++ if (sb_desc != urb_priv->last_sb) {
++ /* This urb has been sent. */
++ urb_priv->isoc_out_done = 1;
++
++ } else { /* Found URB that has last_sb as the interrupt reason */
++
++ /* Check if EP has been disabled, meaning that all transfers are done*/
++ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
++ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) ==
++ IO_STATE(USB_SB_command, eol, yes));
++ ASSERT(sb_desc->next == 0);
++ urb_priv->isoc_out_done = 1;
++ } else {
++ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n",
++ (unsigned int)urb, urb_priv->urb_num);
++ }
++ /* Stop looking any further in queue */
++ epid_done = 1;
++ }
++
++ if (!epid_done) {
++ if(urb == activeUrbList[epid]) {
++ urb = urb_list_first(epid);
++ } else {
++ urb = urb_list_next(urb, epid);
++ }
++ }
++ } /* END: while(urb && !epid_done) */
++ }
++
++ local_irq_restore(flags);
++}
++
++
++/* This is where the Out Isoc URBs are realy completed. This function is
++ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers
++ are done. This functions completes all URBs earlier marked with
++ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */
++
++static void complete_isoc_bottom_half(void *data) {
++ struct crisv10_isoc_complete_data *comp_data;
++ struct usb_iso_packet_descriptor *packet;
++ struct crisv10_urb_priv * urb_priv;
++ unsigned long flags;
++ struct urb* urb;
++ int epid_done;
++ int epid;
++ int i;
++
++ comp_data = (struct crisv10_isoc_complete_data*)data;
++
++ local_irq_save(flags);
++
++ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
++ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) {
++ /* Only check valid Out Isoc epids */
++ continue;
++ }
++
++ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid,
++ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub));
++
++ /* The descriptor interrupt handler has marked all transmitted Out Isoc
++ URBs with isoc_out_done. Now we traverse all epids and for all that
++ have out Isoc traffic we traverse its URB list and complete the
++ transmitted URBs. */
++ epid_done = 0;
++ while (!epid_done) {
++
++ /* Get the active urb (if any) */
++ urb = activeUrbList[epid];
++ if (urb == 0) {
++ isoc_dbg("No active URB on epid:%d anymore\n", epid);
++ epid_done = 1;
++ continue;
++ }
++
++ /* Sanity check. */
++ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
++ ASSERT(usb_pipeout(urb->pipe));
++
++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ ASSERT(urb_priv);
++
++ if (!(urb_priv->isoc_out_done)) {
++ /* We have reached URB that isn't flaged done yet, stop traversing. */
++ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d"
++ " before not yet flaged URB:0x%x[%d]\n",
++ epid, (unsigned int)urb, urb_priv->urb_num);
++ epid_done = 1;
++ continue;
++ }
++
++ /* This urb has been sent. */
++ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n",
++ (unsigned int)urb, urb_priv->urb_num);
++
++ /* Set ok on transfered packets for this URB and finish it */
++ for (i = 0; i < urb->number_of_packets; i++) {
++ packet = &urb->iso_frame_desc[i];
++ packet->status = 0;
++ packet->actual_length = packet->length;
++ }
++ urb_priv->isoc_packet_counter = urb->number_of_packets;
++ tc_finish_urb(comp_data->hcd, urb, 0);
++
++ } /* END: while(!epid_done) */
++ } /* END: for(epid...) */
++
++ local_irq_restore(flags);
++ kmem_cache_free(isoc_compl_cache, comp_data);
++}
++#endif
++
++static void check_finished_intr_tx_epids(struct usb_hcd *hcd) {
++ unsigned long flags;
++ int epid;
++ struct urb *urb;
++ struct crisv10_urb_priv * urb_priv;
++ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
++ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
++
++ /* Protect TxintrEPList */
++ local_irq_save(flags);
++
++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
++ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) {
++ /* Nothing to see on this epid. Only check valid Out Intr epids */
++ continue;
++ }
++
++ urb = activeUrbList[epid];
++ if(urb == 0) {
++ intr_warn("Found Out Intr epid:%d with no active URB\n", epid);
++ continue;
++ }
++
++ /* Sanity check. */
++ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT);
++ ASSERT(usb_pipeout(urb->pipe));
++
++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ ASSERT(urb_priv);
++
++ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs
++ are inserted.*/
++ curr_ep = &TxIntrEPList[0];
++ do {
++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
++ if(next_ep == urb_priv->intr_ep_pool[0]) {
++ /* We found the Out Intr EP for this epid */
++
++ /* Disable it so it doesn't get processed again */
++ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
++
++ /* Finish the active Out Intr URB with status OK */
++ tc_finish_urb(hcd, urb, 0);
++ }
++ curr_ep = phys_to_virt(curr_ep->next);
++ } while (curr_ep != &TxIntrEPList[1]);
++
++ }
++ local_irq_restore(flags);
++}
++
++/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */
++static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) {
++ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
++ ASSERT(hcd);
++
++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) {
++ /* Clear this interrupt */
++ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do);
++ restart_dma8_sub0();
++ }
++
++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) {
++ /* Clear this interrupt */
++ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do);
++ check_finished_ctrl_tx_epids(hcd);
++ }
++
++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) {
++ /* Clear this interrupt */
++ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do);
++ check_finished_intr_tx_epids(hcd);
++ }
++
++ /* hinko ignore usb_pipeisoc */
++#if 0
++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) {
++ struct crisv10_isoc_complete_data* comp_data;
++
++ /* Flag done Out Isoc for later completion */
++ check_finished_isoc_tx_epids();
++
++ /* Clear this interrupt */
++ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
++ /* Schedule bottom half of Out Isoc completion function. This function
++ finishes the URBs marked with isoc_out_done */
++ comp_data = (struct crisv10_isoc_complete_data*)
++ kmem_cache_alloc(isoc_compl_cache, GFP_ATOMIC);
++ ASSERT(comp_data != NULL);
++ comp_data ->hcd = hcd;
++
++ //INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data);
++ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half);
++ schedule_work(&comp_data->usb_bh);
++ }
++#endif
++
++ return IRQ_HANDLED;
++}
++
++/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */
++static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) {
++ unsigned long flags;
++ struct urb *urb;
++ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
++ struct crisv10_urb_priv *urb_priv;
++ int epid = 0;
++ int real_error;
++
++ ASSERT(hcd);
++
++ /* Clear this interrupt. */
++ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do);
++
++ /* Custom clear interrupt for this interrupt */
++ /* The reason we cli here is that we call the driver's callback functions. */
++ local_irq_save(flags);
++
++ /* Note that this while loop assumes that all packets span only
++ one rx descriptor. */
++ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) {
++ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status);
++ /* Get the active URB for this epid */
++ urb = activeUrbList[epid];
++
++ ASSERT(epid_inuse(epid));
++ if (!urb) {
++ dma_err("No urb for epid %d in rx interrupt\n", epid);
++ goto skip_out;
++ }
++
++ /* Check if any errors on epid */
++ real_error = 0;
++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) {
++ __u32 r_usb_ept_data;
++
++ if (usb_pipeisoc(urb->pipe)) {
++ r_usb_ept_data = etrax_epid_iso_get(epid);
++ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) &&
++ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) &&
++ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) {
++ /* Not an error, just a failure to receive an expected iso
++ in packet in this frame. This is not documented
++ in the designers reference. Continue processing.
++ */
++ } else real_error = 1;
++ } else real_error = 1;
++ }
++
++ if(real_error) {
++ dma_err("Error in RX descr on epid:%d for URB 0x%x",
++ epid, (unsigned int)urb);
++ dump_ept_data(epid);
++ dump_in_desc(myNextRxDesc);
++ goto skip_out;
++ }
++
++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
++ ASSERT(urb_priv);
++ ASSERT(urb_priv->urb_state == STARTED ||
++ urb_priv->urb_state == UNLINK);
++
++ if ((usb_pipetype(urb->pipe) == PIPE_BULK) ||
++ (usb_pipetype(urb->pipe) == PIPE_CONTROL) ||
++ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
++
++ /* We get nodata for empty data transactions, and the rx descriptor's
++ hw_len field is not valid in that case. No data to copy in other
++ words. */
++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
++ /* No data to copy */
++ } else {
++ /*
++ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n",
++ (unsigned int)urb, epid, myNextRxDesc->hw_len,
++ urb_priv->rx_offset);
++ */
++ /* Only copy data if URB isn't flaged to be unlinked*/
++ if(urb_priv->urb_state != UNLINK) {
++ /* Make sure the data fits in the buffer. */
++ if(urb_priv->rx_offset + myNextRxDesc->hw_len
++ <= urb->transfer_buffer_length) {
++
++ /* Copy the data to URBs buffer */
++ memcpy(urb->transfer_buffer + urb_priv->rx_offset,
++ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len);
++ urb_priv->rx_offset += myNextRxDesc->hw_len;
++ } else {
++ /* Signal overflow when returning URB */
++ urb->status = -EOVERFLOW;
++ tc_finish_urb_later(hcd, urb, urb->status);
++ }
++ }
++ }
++
++ /* Check if it was the last packet in the transfer */
++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) {
++ /* Special handling for In Ctrl URBs. */
++ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) &&
++ !(urb_priv->ctrl_zout_done)) {
++ /* Flag that RX part of Ctrl transfer is done. Because zout descr
++ interrupt hasn't happend yet will the URB be finished in the
++ TX-Interrupt. */
++ urb_priv->ctrl_rx_done = 1;
++ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting"
++ " for zout\n", (unsigned int)urb);
++ } else {
++ tc_finish_urb(hcd, urb, 0);
++ }
++ }
++ } else { /* ISOC RX */
++ /*
++ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n",
++ epid, (unsigned int)urb);
++ */
++
++ struct usb_iso_packet_descriptor *packet;
++
++ if (urb_priv->urb_state == UNLINK) {
++ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n");
++ goto skip_out;
++ } else if (urb_priv->urb_state == NOT_STARTED) {
++ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n");
++ goto skip_out;
++ }
++
++ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter];
++ ASSERT(packet);
++ packet->status = 0;
++
++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
++ /* We get nodata for empty data transactions, and the rx descriptor's
++ hw_len field is not valid in that case. We copy 0 bytes however to
++ stay in synch. */
++ packet->actual_length = 0;
++ } else {
++ packet->actual_length = myNextRxDesc->hw_len;
++ /* Make sure the data fits in the buffer. */
++ ASSERT(packet->actual_length <= packet->length);
++ memcpy(urb->transfer_buffer + packet->offset,
++ phys_to_virt(myNextRxDesc->buf), packet->actual_length);
++ if(packet->actual_length > 0)
++ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n",
++ packet->actual_length, urb_priv->isoc_packet_counter,
++ (unsigned int)urb, urb_priv->urb_num);
++ }
++
++ /* Increment the packet counter. */
++ urb_priv->isoc_packet_counter++;
++
++ /* Note that we don't care about the eot field in the rx descriptor's
++ status. It will always be set for isoc traffic. */
++ if (urb->number_of_packets == urb_priv->isoc_packet_counter) {
++ /* Complete the urb with status OK. */
++ tc_finish_urb(hcd, urb, 0);
++ }
++ }
++
++ skip_out:
++ myNextRxDesc->status = 0;
++ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol);
++ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol);
++ myLastRxDesc = myNextRxDesc;
++ myNextRxDesc = phys_to_virt(myNextRxDesc->next);
++ flush_etrax_cache();
++ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart);
++ }
++
++ local_irq_restore(flags);
++
++ return IRQ_HANDLED;
++}
++
++static void tc_bulk_start_timer_func(unsigned long dummy) {
++ /* We might enable an EP descriptor behind the current DMA position when
++ it's about to decide that there are no more bulk traffic and it should
++ stop the bulk channel.
++ Therefore we periodically check if the bulk channel is stopped and there
++ is an enabled bulk EP descriptor, in which case we start the bulk
++ channel. */
++
++ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
++ int epid;
++
++ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n");
++
++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
++ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
++ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n",
++ epid);
++ restart_dma8_sub0();
++
++ /* Restart the bulk eot timer since we just started the bulk channel.*/
++ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
++
++ /* No need to search any further. */
++ break;
++ }
++ }
++ } else {
++ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n");
++ }
++}
++
++static void tc_bulk_eot_timer_func(unsigned long dummy) {
++ struct usb_hcd *hcd = (struct usb_hcd*)dummy;
++ ASSERT(hcd);
++ /* Because of a race condition in the top half, we might miss a bulk eot.
++ This timer "simulates" a bulk eot if we don't get one for a while,
++ hopefully correcting the situation. */
++ timer_dbg("bulk_eot_timer timed out.\n");
++ check_finished_bulk_tx_epids(hcd, 1);
++}
++
++
++/*************************************************************/
++/*************************************************************/
++/* Device driver block */
++/*************************************************************/
++/*************************************************************/
++
++/* Forward declarations for device driver functions */
++static int devdrv_hcd_probe(struct device *);
++static int devdrv_hcd_remove(struct device *);
++#ifdef CONFIG_PM
++static int devdrv_hcd_suspend(struct device *, u32, u32);
++static int devdrv_hcd_resume(struct device *, u32);
++#endif /* CONFIG_PM */
++
++/* the device */
++static struct platform_device *devdrv_hc_platform_device;
++
++/* device driver interface */
++static struct device_driver devdrv_hc_device_driver = {
++ .name = (char *) hc_name,
++ .bus = &platform_bus_type,
++
++ .probe = devdrv_hcd_probe,
++ .remove = devdrv_hcd_remove,
++
++#ifdef CONFIG_PM
++ .suspend = devdrv_hcd_suspend,
++ .resume = devdrv_hcd_resume,
++#endif /* CONFIG_PM */
++};
++
++/* initialize the host controller and driver */
++static int __init_or_module devdrv_hcd_probe(struct device *dev)
++{
++ struct usb_hcd *hcd;
++ struct crisv10_hcd *crisv10_hcd;
++ int retval;
++ int rev_maj, rev_min;
++
++ /* Check DMA burst length */
++ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) !=
++ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) {
++ devdrv_err("Invalid DMA burst length in Etrax 100LX,"
++ " needs to be 32\n");
++ return -EPERM;
++ }
++
++ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev_name(dev));
++ if (!hcd)
++ return -ENOMEM;
++
++ crisv10_hcd = hcd_to_crisv10_hcd(hcd);
++ spin_lock_init(&crisv10_hcd->lock);
++ crisv10_hcd->num_ports = num_ports();
++ crisv10_hcd->running = 0;
++
++ dev_set_drvdata(dev, crisv10_hcd);
++
++ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ,
++ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ);
++
++ /* Print out chip version read from registers */
++ rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major);
++ rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor);
++ if(rev_min == 0) {
++ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj);
++ } else {
++ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min);
++ }
++
++ devdrv_info("Bulk timer interval, start:%d eot:%d\n",
++ BULK_START_TIMER_INTERVAL,
++ BULK_EOT_TIMER_INTERVAL);
++
++
++ /* Init root hub data structures */
++ if(rh_init()) {
++ devdrv_err("Failed init data for Root Hub\n");
++ retval = -ENOMEM;
++ }
++
++ if(port_in_use(0)) {
++ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) {
++ printk(KERN_CRIT "usb-host: request IO interface usb1 failed");
++ retval = -EBUSY;
++ goto out;
++ }
++ devdrv_info("Claimed interface for USB physical port 1\n");
++ }
++ if(port_in_use(1)) {
++ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) {
++ /* Free first interface if second failed to be claimed */
++ if(port_in_use(0)) {
++ cris_free_io_interface(if_usb_1);
++ }
++ printk(KERN_CRIT "usb-host: request IO interface usb2 failed");
++ retval = -EBUSY;
++ goto out;
++ }
++ devdrv_info("Claimed interface for USB physical port 2\n");
++ }
++
++ /* Init transfer controller structs and locks */
++ if((retval = tc_init(hcd)) != 0) {
++ goto out;
++ }
++
++ /* Attach interrupt functions for DMA and init DMA controller */
++ if((retval = tc_dma_init(hcd)) != 0) {
++ goto out;
++ }
++
++ /* Attach the top IRQ handler for USB controller interrupts */
++ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0,
++ "ETRAX 100LX built-in USB (HC)", hcd)) {
++ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ);
++ retval = -EBUSY;
++ goto out;
++ }
++
++ /* iso_eof is only enabled when isoc traffic is running. */
++ *R_USB_IRQ_MASK_SET =
++ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */
++ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) |
++ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) |
++ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) |
++ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set);
++
++
++ crisv10_ready_wait();
++ /* Reset the USB interface. */
++ *R_USB_COMMAND =
++ IO_STATE(R_USB_COMMAND, port_sel, nop) |
++ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
++ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
++
++ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to
++ 0x2A30 (10800), to guarantee that control traffic gets 10% of the
++ bandwidth, and periodic transfer may allocate the rest (90%).
++ This doesn't work though.
++ The value 11960 is chosen to be just after the SOF token, with a couple
++ of bit times extra for possible bit stuffing. */
++ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960);
++
++ crisv10_ready_wait();
++ /* Configure the USB interface as a host controller. */
++ *R_USB_COMMAND =
++ IO_STATE(R_USB_COMMAND, port_sel, nop) |
++ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config);
++
++
++ /* Check so controller not busy before enabling ports */
++ crisv10_ready_wait();
++
++ /* Enable selected USB ports */
++ if(port_in_use(0)) {
++ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
++ } else {
++ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
++ }
++ if(port_in_use(1)) {
++ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
++ } else {
++ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes);
++ }
++
++ crisv10_ready_wait();
++ /* Start processing of USB traffic. */
++ *R_USB_COMMAND =
++ IO_STATE(R_USB_COMMAND, port_sel, nop) |
++ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
++
++ /* Do not continue probing initialization before USB interface is done */
++ crisv10_ready_wait();
++
++ /* Register our Host Controller to USB Core
++ * Finish the remaining parts of generic HCD initialization: allocate the
++ * buffers of consistent memory, register the bus
++ * and call the driver's reset() and start() routines. */
++ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED);
++ if (retval != 0) {
++ devdrv_err("Failed registering HCD driver\n");
++ goto out;
++ }
++
++ return 0;
++
++ out:
++ devdrv_hcd_remove(dev);
++ return retval;
++}
++
++
++/* cleanup after the host controller and driver */
++static int __init_or_module devdrv_hcd_remove(struct device *dev)
++{
++ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev);
++ struct usb_hcd *hcd;
++
++ if (!crisv10_hcd)
++ return 0;
++ hcd = crisv10_hcd_to_hcd(crisv10_hcd);
++
++
++ /* Stop USB Controller in Etrax 100LX */
++ crisv10_hcd_reset(hcd);
++
++ usb_remove_hcd(hcd);
++ devdrv_dbg("Removed HCD from USB Core\n");
++
++ /* Free USB Controller IRQ */
++ free_irq(ETRAX_USB_HC_IRQ, NULL);
++
++ /* Free resources */
++ tc_dma_destroy();
++ tc_destroy();
++
++
++ if(port_in_use(0)) {
++ cris_free_io_interface(if_usb_1);
++ }
++ if(port_in_use(1)) {
++ cris_free_io_interface(if_usb_2);
++ }
++
++ devdrv_dbg("Freed all claimed resources\n");
++
++ return 0;
++}
++
++
++#ifdef CONFIG_PM
++
++static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level)
++{
++ return 0; /* no-op for now */
++}
++
++static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level)
++{
++ return 0; /* no-op for now */
++}
++
++#endif /* CONFIG_PM */
++
++
++
++/*************************************************************/
++/*************************************************************/
++/* Module block */
++/*************************************************************/
++/*************************************************************/
++
++/* register driver */
++static int __init module_hcd_init(void)
++{
++
++ if (usb_disabled())
++ return -ENODEV;
++
++ /* Here we select enabled ports by following defines created from
++ menuconfig */
++#ifndef CONFIG_ETRAX_USB_HOST_PORT1
++ ports &= ~(1<<0);
++#endif
++#ifndef CONFIG_ETRAX_USB_HOST_PORT2
++ ports &= ~(1<<1);
++#endif
++
++ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc);
++
++ devdrv_hc_platform_device =
++ platform_device_register_simple((char *) hc_name, 0, NULL, 0);
++
++ if (IS_ERR(devdrv_hc_platform_device))
++ return PTR_ERR(devdrv_hc_platform_device);
++ return driver_register(&devdrv_hc_device_driver);
++ /*
++ * Note that we do not set the DMA mask for the device,
++ * i.e. we pretend that we will use PIO, since no specific
++ * allocation routines are needed for DMA buffers. This will
++ * cause the HCD buffer allocation routines to fall back to
++ * kmalloc().
++ */
++}
++
++/* unregister driver */
++static void __exit module_hcd_exit(void)
++{
++ driver_unregister(&devdrv_hc_device_driver);
++}
++
++
++/* Module hooks */
++module_init(module_hcd_init);
++module_exit(module_hcd_exit);
+diff -Nur linux-2.6.36.orig/drivers/usb/host/hc-crisv10.h linux-2.6.36/drivers/usb/host/hc-crisv10.h
+--- linux-2.6.36.orig/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.36/drivers/usb/host/hc-crisv10.h 2010-11-15 17:57:18.000000000 +0100
+@@ -0,0 +1,331 @@
++#ifndef __LINUX_ETRAX_USB_H
++#define __LINUX_ETRAX_USB_H
++
++#include <linux/types.h>
++#include <linux/list.h>
++
++struct USB_IN_Desc {
++ volatile __u16 sw_len;
++ volatile __u16 command;
++ volatile unsigned long next;
++ volatile unsigned long buf;
++ volatile __u16 hw_len;
++ volatile __u16 status;
++};
++
++struct USB_SB_Desc {
++ volatile __u16 sw_len;
++ volatile __u16 command;
++ volatile unsigned long next;
++ volatile unsigned long buf;
++};
++
++struct USB_EP_Desc {
++ volatile __u16 hw_len;
++ volatile __u16 command;
++ volatile unsigned long sub;
++ volatile unsigned long next;
++};
++
++
++/* Root Hub port status struct */
++struct crisv10_rh {
++ volatile __u16 wPortChange[2];
++ volatile __u16 wPortStatusPrev[2];
++};
++
++/* HCD description */
++struct crisv10_hcd {
++ spinlock_t lock;
++ __u8 num_ports;
++ __u8 running;
++};
++
++
++/* Endpoint HC private data description */
++struct crisv10_ep_priv {
++ int epid;
++};
++
++/* Additional software state info for a USB Controller epid */
++struct etrax_epid {
++ __u8 inuse; /* !0 = setup in Etrax and used for a endpoint */
++ __u8 disabled; /* !0 = Temporarly disabled to avoid resubmission */
++ __u8 type; /* Setup as: PIPE_BULK, PIPE_CONTROL ... */
++ __u8 out_traffic; /* !0 = This epid is for out traffic */
++};
++
++/* Struct to hold information of scheduled later URB completion */
++struct urb_later_data {
++// struct work_struct ws;
++ struct delayed_work ws;
++ struct usb_hcd *hcd;
++ struct urb *urb;
++ int urb_num;
++ int status;
++};
++
++
++typedef enum {
++ STARTED,
++ NOT_STARTED,
++ UNLINK,
++} crisv10_urb_state_t;
++
++
++struct crisv10_urb_priv {
++ /* Sequence number for this URB. Every new submited URB gets this from
++ a incrementing counter. Used when a URB is scheduled for later finish to
++ be sure that the intended URB hasn't already been completed (device
++ drivers has a tendency to reuse URBs once they are completed, causing us
++ to not be able to single old ones out only based on the URB pointer.) */
++ __u32 urb_num;
++
++ /* The first_sb field is used for freeing all SB descriptors belonging
++ to an urb. The corresponding ep descriptor's sub pointer cannot be
++ used for this since the DMA advances the sub pointer as it processes
++ the sb list. */
++ struct USB_SB_Desc *first_sb;
++
++ /* The last_sb field referes to the last SB descriptor that belongs to
++ this urb. This is important to know so we can free the SB descriptors
++ that ranges between first_sb and last_sb. */
++ struct USB_SB_Desc *last_sb;
++
++ /* The rx_offset field is used in ctrl and bulk traffic to keep track
++ of the offset in the urb's transfer_buffer where incoming data should be
++ copied to. */
++ __u32 rx_offset;
++
++ /* Counter used in isochronous transfers to keep track of the
++ number of packets received/transmitted. */
++ __u32 isoc_packet_counter;
++
++ /* Flag that marks if this Isoc Out URB has finished it's transfer. Used
++ because several URBs can be finished before list is processed */
++ __u8 isoc_out_done;
++
++ /* This field is used to pass information about the urb's current state
++ between the various interrupt handlers (thus marked volatile). */
++ volatile crisv10_urb_state_t urb_state;
++
++ /* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT.
++ When DMA8 sub-channel 2 has processed the SB list for this sequence we
++ get a interrupt. We also get a interrupt for In transfers and which
++ one of these interrupts that comes first depends of data size and device.
++ To be sure that we have got both interrupts before we complete the URB
++ we have these to flags that shows which part that has completed.
++ We can then check when we get one of the interrupts that if the other has
++ occured it's safe for us to complete the URB, otherwise we set appropriate
++ flag and do the completion when we get the other interrupt. */
++ volatile unsigned char ctrl_zout_done;
++ volatile unsigned char ctrl_rx_done;
++
++ /* Connection between the submitted urb and ETRAX epid number */
++ __u8 epid;
++
++ /* The rx_data_list field is used for periodic traffic, to hold
++ received data for later processing in the the complete_urb functions,
++ where the data us copied to the urb's transfer_buffer. Basically, we
++ use this intermediate storage because we don't know when it's safe to
++ reuse the transfer_buffer (FIXME?). */
++ struct list_head rx_data_list;
++
++
++ /* The interval time rounded up to closest 2^N */
++ int interval;
++
++ /* Pool of EP descriptors needed if it's a INTR transfer.
++ Amount of EPs in pool correspons to how many INTR that should
++ be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */
++ struct USB_EP_Desc* intr_ep_pool[128];
++
++ /* The mount of EPs allocated for this INTR URB */
++ int intr_ep_pool_length;
++
++ /* Pointer to info struct if URB is scheduled to be finished later */
++ struct urb_later_data* later_data;
++};
++
++
++/* This struct is for passing data from the top half to the bottom half irq
++ handlers */
++struct crisv10_irq_reg {
++ struct usb_hcd* hcd;
++ __u32 r_usb_epid_attn;
++ __u8 r_usb_status;
++ __u16 r_usb_rh_port_status_1;
++ __u16 r_usb_rh_port_status_2;
++ __u32 r_usb_irq_mask_read;
++ __u32 r_usb_fm_number;
++ struct work_struct usb_bh;
++};
++
++
++/* This struct is for passing data from the isoc top half to the isoc bottom
++ half. */
++struct crisv10_isoc_complete_data {
++ struct usb_hcd *hcd;
++ struct urb *urb;
++ struct work_struct usb_bh;
++};
++
++/* Entry item for URB lists for each endpint */
++typedef struct urb_entry
++{
++ struct urb *urb;
++ struct list_head list;
++} urb_entry_t;
++
++/* ---------------------------------------------------------------------------
++ Virtual Root HUB
++ ------------------------------------------------------------------------- */
++/* destination of request */
++#define RH_INTERFACE 0x01
++#define RH_ENDPOINT 0x02
++#define RH_OTHER 0x03
++
++#define RH_CLASS 0x20
++#define RH_VENDOR 0x40
++
++/* Requests: bRequest << 8 | bmRequestType */
++#define RH_GET_STATUS 0x0080
++#define RH_CLEAR_FEATURE 0x0100
++#define RH_SET_FEATURE 0x0300
++#define RH_SET_ADDRESS 0x0500
++#define RH_GET_DESCRIPTOR 0x0680
++#define RH_SET_DESCRIPTOR 0x0700
++#define RH_GET_CONFIGURATION 0x0880
++#define RH_SET_CONFIGURATION 0x0900
++#define RH_GET_STATE 0x0280
++#define RH_GET_INTERFACE 0x0A80
++#define RH_SET_INTERFACE 0x0B00
++#define RH_SYNC_FRAME 0x0C80
++/* Our Vendor Specific Request */
++#define RH_SET_EP 0x2000
++
++
++/* Hub port features */
++#define RH_PORT_CONNECTION 0x00
++#define RH_PORT_ENABLE 0x01
++#define RH_PORT_SUSPEND 0x02
++#define RH_PORT_OVER_CURRENT 0x03
++#define RH_PORT_RESET 0x04
++#define RH_PORT_POWER 0x08
++#define RH_PORT_LOW_SPEED 0x09
++#define RH_C_PORT_CONNECTION 0x10
++#define RH_C_PORT_ENABLE 0x11
++#define RH_C_PORT_SUSPEND 0x12
++#define RH_C_PORT_OVER_CURRENT 0x13
++#define RH_C_PORT_RESET 0x14
++
++/* Hub features */
++#define RH_C_HUB_LOCAL_POWER 0x00
++#define RH_C_HUB_OVER_CURRENT 0x01
++
++#define RH_DEVICE_REMOTE_WAKEUP 0x00
++#define RH_ENDPOINT_STALL 0x01
++
++/* Our Vendor Specific feature */
++#define RH_REMOVE_EP 0x00
++
++
++#define RH_ACK 0x01
++#define RH_REQ_ERR -1
++#define RH_NACK 0x00
++
++/* Field definitions for */
++
++#define USB_IN_command__eol__BITNR 0 /* command macros */
++#define USB_IN_command__eol__WIDTH 1
++#define USB_IN_command__eol__no 0
++#define USB_IN_command__eol__yes 1
++
++#define USB_IN_command__intr__BITNR 3
++#define USB_IN_command__intr__WIDTH 1
++#define USB_IN_command__intr__no 0
++#define USB_IN_command__intr__yes 1
++
++#define USB_IN_status__eop__BITNR 1 /* status macros. */
++#define USB_IN_status__eop__WIDTH 1
++#define USB_IN_status__eop__no 0
++#define USB_IN_status__eop__yes 1
++
++#define USB_IN_status__eot__BITNR 5
++#define USB_IN_status__eot__WIDTH 1
++#define USB_IN_status__eot__no 0
++#define USB_IN_status__eot__yes 1
++
++#define USB_IN_status__error__BITNR 6
++#define USB_IN_status__error__WIDTH 1
++#define USB_IN_status__error__no 0
++#define USB_IN_status__error__yes 1
++
++#define USB_IN_status__nodata__BITNR 7
++#define USB_IN_status__nodata__WIDTH 1
++#define USB_IN_status__nodata__no 0
++#define USB_IN_status__nodata__yes 1
++
++#define USB_IN_status__epid__BITNR 8
++#define USB_IN_status__epid__WIDTH 5
++
++#define USB_EP_command__eol__BITNR 0
++#define USB_EP_command__eol__WIDTH 1
++#define USB_EP_command__eol__no 0
++#define USB_EP_command__eol__yes 1
++
++#define USB_EP_command__eof__BITNR 1
++#define USB_EP_command__eof__WIDTH 1
++#define USB_EP_command__eof__no 0
++#define USB_EP_command__eof__yes 1
++
++#define USB_EP_command__intr__BITNR 3
++#define USB_EP_command__intr__WIDTH 1
++#define USB_EP_command__intr__no 0
++#define USB_EP_command__intr__yes 1
++
++#define USB_EP_command__enable__BITNR 4
++#define USB_EP_command__enable__WIDTH 1
++#define USB_EP_command__enable__no 0
++#define USB_EP_command__enable__yes 1
++
++#define USB_EP_command__hw_valid__BITNR 5
++#define USB_EP_command__hw_valid__WIDTH 1
++#define USB_EP_command__hw_valid__no 0
++#define USB_EP_command__hw_valid__yes 1
++
++#define USB_EP_command__epid__BITNR 8
++#define USB_EP_command__epid__WIDTH 5
++
++#define USB_SB_command__eol__BITNR 0 /* command macros. */
++#define USB_SB_command__eol__WIDTH 1
++#define USB_SB_command__eol__no 0
++#define USB_SB_command__eol__yes 1
++
++#define USB_SB_command__eot__BITNR 1
++#define USB_SB_command__eot__WIDTH 1
++#define USB_SB_command__eot__no 0
++#define USB_SB_command__eot__yes 1
++
++#define USB_SB_command__intr__BITNR 3
++#define USB_SB_command__intr__WIDTH 1
++#define USB_SB_command__intr__no 0
++#define USB_SB_command__intr__yes 1
++
++#define USB_SB_command__tt__BITNR 4
++#define USB_SB_command__tt__WIDTH 2
++#define USB_SB_command__tt__zout 0
++#define USB_SB_command__tt__in 1
++#define USB_SB_command__tt__out 2
++#define USB_SB_command__tt__setup 3
++
++
++#define USB_SB_command__rem__BITNR 8
++#define USB_SB_command__rem__WIDTH 6
++
++#define USB_SB_command__full__BITNR 6
++#define USB_SB_command__full__WIDTH 1
++#define USB_SB_command__full__no 0
++#define USB_SB_command__full__yes 1
++
++#endif
+diff -Nur linux-2.6.36.orig/lib/klist.c linux-2.6.36/lib/klist.c
+--- linux-2.6.36.orig/lib/klist.c 2010-10-20 22:30:22.000000000 +0200
++++ linux-2.6.36/lib/klist.c 2010-11-15 17:57:18.000000000 +0100
+@@ -60,7 +60,7 @@
+ {
+ knode->n_klist = klist;
+ /* no knode deserves to start its life dead */
+- WARN_ON(knode_dead(knode));
++ //WARN_ON(knode_dead(knode));
+ }
+
+ static void knode_kill(struct klist_node *knode)