diff options
Diffstat (limited to 'package/xf86-input-evtouch/extra/xf86OSmouse.h')
| -rw-r--r-- | package/xf86-input-evtouch/extra/xf86OSmouse.h | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/package/xf86-input-evtouch/extra/xf86OSmouse.h b/package/xf86-input-evtouch/extra/xf86OSmouse.h new file mode 100644 index 000000000..09b8525f7 --- /dev/null +++ b/package/xf86-input-evtouch/extra/xf86OSmouse.h @@ -0,0 +1,277 @@ +/* + * Copyright (c) 1999-2003 by The XFree86 Project, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of the copyright holder(s) + * and author(s) shall not be used in advertising or otherwise to promote + * the sale, use or other dealings in this Software without prior written + * authorization from the copyright holder(s) and author(s). + */ + +/* Public interface to OS-specific mouse support. */ + +#ifndef _XF86OSMOUSE_H_ +#define _XF86OSMOUSE_H_ + +#include "xf86Xinput.h" + +/* Mouse interface classes */ +#define MSE_NONE 0x00 +#define MSE_SERIAL 0x01 /* serial port */ +#define MSE_BUS 0x02 /* old bus mouse */ +#define MSE_PS2 0x04 /* standard read-only PS/2 */ +#define MSE_XPS2 0x08 /* extended PS/2 */ +#define MSE_AUTO 0x10 /* auto-detect (PnP) */ +#define MSE_MISC 0x20 /* The OS layer will identify the + * specific protocol names that are + * supported for this class. */ + +/* Mouse Protocol IDs. */ +typedef enum { + PROT_UNKNOWN = -2, + PROT_UNSUP = -1, /* protocol is not supported */ + PROT_MS = 0, + PROT_MSC, + PROT_MM, + PROT_LOGI, + PROT_LOGIMAN, + PROT_MMHIT, + PROT_GLIDE, + PROT_IMSERIAL, + PROT_THINKING, + PROT_ACECAD, + PROT_VALUMOUSESCROLL, + PROT_PS2, + PROT_GENPS2, + PROT_IMPS2, + PROT_EXPPS2, + PROT_THINKPS2, + PROT_MMPS2, + PROT_GLIDEPS2, + PROT_NETPS2, + PROT_NETSCPS2, + PROT_BM, + PROT_AUTO, + PROT_SYSMOUSE, + PROT_NUMPROTOS /* This must always be last. */ +} MouseProtocolID; + +struct _MouseDevRec; + +typedef int (*GetInterfaceTypesProc)(void); +typedef const char **(*BuiltinNamesProc)(void); +typedef Bool (*CheckProtocolProc)(const char *protocol); +typedef Bool (*BuiltinPreInitProc)(InputInfoPtr pInfo, const char *protocol, + int flags); +typedef const char *(*DefaultProtocolProc)(void); +typedef const char *(*SetupAutoProc)(InputInfoPtr pInfo, int *protoPara); +typedef void (*SetResProc)(InputInfoPtr pInfo, const char* protocol, int rate, + int res); +typedef const char *(*FindDeviceProc)(InputInfoPtr pInfo, const char *protocol, + int flags); +typedef const char *(*GuessProtocolProc)(InputInfoPtr pInfo, int flags); + +/* + * OSMouseInfoRec is used to pass information from the OSMouse layer to the + * OS-independent mouse driver. + */ +typedef struct { + GetInterfaceTypesProc SupportedInterfaces; + BuiltinNamesProc BuiltinNames; + CheckProtocolProc CheckProtocol; + BuiltinPreInitProc PreInit; + DefaultProtocolProc DefaultProtocol; + SetupAutoProc SetupAuto; + SetResProc SetPS2Res; + SetResProc SetBMRes; + SetResProc SetMiscRes; + FindDeviceProc FindDevice; + GuessProtocolProc GuessProtocol; +} OSMouseInfoRec, *OSMouseInfoPtr; + +/* + * SupportedInterfaces: Returns the mouse interface types that the OS support. + * If MSE_MISC is returned, then the BuiltinNames and + * CheckProtocol should be set. + * + * BuiltinNames: Returns the names of the protocols that are fully handled + * in the OS-specific code. These are names that don't appear + * directly in the main "mouse" driver. + * + * CheckProtocol: Checks if the protocol name given is supported by the + * OS. It should return TRUE for both "builtin" protocols and + * protocols of type MSE_MISC that are supported by the OS. + * + * PreInit: The PreInit function for protocols that are builtin. This + * function is passed the protocol name. + * + * DefaultProtocol: Returns the name of a default protocol that should be used + * for the OS when none has been supplied in the config file. + * This should only be set when there is a reasonable default. + * + * SetupAuto: This function can be used to do OS-specific protocol + * auto-detection. It returns the name of the detected protocol, + * or NULL when detection fails. It may also adjust one or more + * of the "protoPara" values for the detected protocol by setting + * then to something other than -1. SetupAuto gets called in two + * ways. The first is before any devices have been opened. This + * can be used when the protocol "Auto" always maps to a single + * protocol type. The second is with the device open, allowing + * OS-specific probing to be done. + * + * SetPS2Res: Set the resolution and sample rate for MSE_PS2 and MSE_XPS2 + * protocol types. + * + * SetBMRes: Set the resolution and sample rate for MSE_BM protocol types. + * + * SetMiscRes: Set the resolution and sample rate for MSE_MISC protocol types. + * + * FindDevice: This function gets called when no Device has been specified + * in the config file. OS-specific methods may be used to guess + * which input device to use. This function is called after the + * pre-open attempts at protocol discovery are done, but before + * the device is open. I.e., after the first SetupAuto() call, + * after the DefaultProtocol() call, but before the PreInit() + * call. Available protocol information may be used in locating + * the default input device. + * + * GuessProtocol: A last resort attempt at guessing the mouse protocol by + * whatever OS-specific means might be available. OS-independent + * things should be in the mouse driver. This function gets + * called after the mouse driver's OS-independent methods have + * failed. + */ + +extern OSMouseInfoPtr xf86OSMouseInit(int flags); + +/* Adjust this when the mouse interface changes. */ + +/* + * History: + * + * 1.0.0 - Everything up to when versioning was started. + * 1.1.0 - FindDevice and GuessProtocol added to OSMouseInfoRec + * 1.2.0 - xisbscale added to MouseDevRec + * + */ + +/* Z axis mapping */ +#define MSE_NOZMAP 0 +#define MSE_MAPTOX -1 +#define MSE_MAPTOY -2 +#define MSE_MAPTOZ -3 +#define MSE_MAPTOW -4 + +/* Generalize for other axes. */ +#define MSE_NOAXISMAP MSE_NOZMAP + +#define MSE_MAXBUTTONS 24 +#define MSE_DFLTBUTTONS 3 + +/* + * Mouse device record. This is shared by the mouse driver and the OSMouse + * layer. + */ + +typedef void (*checkMovementsProc)(InputInfoPtr,int, int); +typedef void (*autoProbeProc)(InputInfoPtr, Bool, Bool); +typedef Bool (*collectDataProc)(struct _MouseDevRec *, unsigned char); +typedef Bool (*dataGoodProc)(struct _MouseDevRec *); + +typedef void (*PostMseEventProc)(InputInfoPtr pInfo, int buttons, + int dx, int dy, int dz, int dw); +typedef void (*MouseCommonOptProc)(InputInfoPtr pInfo); + +typedef struct _MouseDevRec { + PtrCtrlProcPtr Ctrl; + PostMseEventProc PostEvent; + MouseCommonOptProc CommonOptions; + DeviceIntPtr device; + const char * mseDevice; + const char * protocol; + MouseProtocolID protocolID; + MouseProtocolID oldProtocolID; /* hack */ + int class; + int mseModel; + int baudRate; + int oldBaudRate; + int sampleRate; + int lastButtons; + int threshold; /* acceleration */ + int num; + int den; + int buttons; /* # of buttons */ + int emulateState; /* automata state for 2 button mode */ + Bool emulate3Buttons; + Bool emulate3ButtonsSoft; + int emulate3Timeout;/* Timeout for 3 button emulation */ + Bool chordMiddle; + Bool flipXY; + int invX; + int invY; + int mouseFlags; /* Flags to Clear after opening + * mouse dev */ + int truebuttons; /* (not used) + * Arg to maintain before + * emulate3buttons timer callback */ + int resolution; + int negativeZ; /* button mask */ + int positiveZ; /* button mask */ + int negativeW; /* button mask */ + int positiveW; /* button mask */ + pointer buffer; /* usually an XISBuffer* */ + int protoBufTail; + unsigned char protoBuf[8]; + unsigned char protoPara[8]; + unsigned char inSync; /* driver in sync with datastream */ + pointer mousePriv; /* private area */ + InputInfoPtr pInfo; + int origProtocolID; + const char * origProtocol; + Bool emulate3Pending;/* timer waiting */ + CARD32 emulate3Expires;/* time to fire emulation code */ + Bool emulateWheel; + int wheelInertia; + int wheelButton; + int negativeX; /* Button values. Unlike the Z and */ + int positiveX; /* W equivalents, these are button */ + int negativeY; /* values rather than button masks. */ + int positiveY; + int wheelYDistance; + int wheelXDistance; + Bool autoProbe; + checkMovementsProc checkMovements; + autoProbeProc autoProbeMouse; + collectDataProc collectData; + dataGoodProc dataGood; + int angleOffset; + pointer pDragLock; /* drag lock area */ + int xisbscale; /* buffer size for 1 event */ + int wheelButtonTimeout;/* Timeout for the wheel button emulation */ + CARD32 wheelButtonExpires; + int doubleClickSourceButtonMask; + int doubleClickTargetButton; + int doubleClickTargetButtonMask; + int doubleClickOldSourceState; + int lastMappedButtons; + int buttonMap[MSE_MAXBUTTONS]; +} MouseDevRec, *MouseDevPtr; + +#endif /* _XF86OSMOUSE_H_ */ |