diff options
Diffstat (limited to 'package/icinga/src/etc/icinga/icinga.cfg')
-rw-r--r-- | package/icinga/src/etc/icinga/icinga.cfg | 1484 |
1 files changed, 0 insertions, 1484 deletions
diff --git a/package/icinga/src/etc/icinga/icinga.cfg b/package/icinga/src/etc/icinga/icinga.cfg deleted file mode 100644 index a95462293..000000000 --- a/package/icinga/src/etc/icinga/icinga.cfg +++ /dev/null @@ -1,1484 +0,0 @@ -############################################################################## -# -# ICINGA.CFG - Sample Main Config File for Icinga -# -# Read the documentation for more information on this configuration -# file. I've provided some comments here, but things may not be so -# clear without further explanation. -# -############################################################################## - - -# LOG FILE -# This is the main log file where service and host events are logged -# for historical purposes. This should be the first option specified -# in the config file!!! - -log_file=/var/log/icinga.log - - - -# OBJECT CONFIGURATION FILE(S) -# These are the object configuration files in which you define hosts, -# host groups, contacts, contact groups, services, etc. -# You can split your object definitions across several config files -# if you wish (as shown below), or keep them all in a single config file. - -# You can specify individual object config files as shown below: -cfg_file=/etc/icinga/objects/commands.cfg -cfg_file=/etc/icinga/objects/contacts.cfg -cfg_file=/etc/icinga/objects/timeperiods.cfg -cfg_file=/etc/icinga/objects/templates.cfg - -# Definitions for monitoring the local (Linux) host -cfg_file=/etc/icinga/objects/localhost.cfg - -# Definitions for monitoring a Windows machine -#cfg_file=/etc/icinga/objects/windows.cfg - -# Definitions for monitoring a router/switch -#cfg_file=/etc/icinga/objects/switch.cfg - -# Definitions for monitoring a network printer -#cfg_file=/etc/icinga/objects/printer.cfg - -# Definitions for ido2db process checks -#cfg_file=/etc/icinga/objects/ido2db_check_proc.cfg - -# You can also tell Icinga to process all config files (with a .cfg -# extension) in a particular directory by using the cfg_dir -# directive as shown below: - -#cfg_dir=/etc/icinga/servers -#cfg_dir=/etc/icinga/printers -#cfg_dir=/etc/icinga/switches -#cfg_dir=/etc/icinga/routers - -# Definitions for broker modules like idoutils.cfg -cfg_dir=/etc/icinga/modules - - - -# OBJECT CACHE FILE -# This option determines where object definitions are cached when -# Icinga starts/restarts. The CGIs read object definitions from -# this cache file (rather than looking at the object config files -# directly) in order to prevent inconsistencies that can occur -# when the config files are modified after Icinga starts. - -object_cache_file=/var/objects.cache - - - -# PRE-CACHED OBJECT FILE -# This options determines the location of the precached object file. -# If you run Icinga with the -p command line option, it will preprocess -# your object configuration file(s) and write the cached config to this -# file. You can then start Icinga with the -u option to have it read -# object definitions from this precached file, rather than the standard -# object configuration files (see the cfg_file and cfg_dir options above). -# Using a precached object file can speed up the time needed to (re)start -# the Icinga process if you've got a large and/or complex configuration. -# Read the documentation section on optimizing Icinga to find our more -# about how this feature works. - -precached_object_file=/var/objects.precache - - - -# RESOURCE FILE -# This is an optional resource file that contains $USERx$ macro -# definitions. Multiple resource files can be specified by using -# multiple resource_file definitions. The CGIs will not attempt to -# read the contents of resource files, so information that is -# considered to be sensitive (usernames, passwords, etc) can be -# defined as macros in this file and restrictive permissions (600) -# can be placed on this file. - -resource_file=/etc/icinga/resource.cfg - - - -# STATUS FILE -# This is where the current status of all monitored services and -# hosts is stored. Its contents are read and processed by the CGIs. -# The contents of the status file are deleted every time Icinga -# restarts. - -status_file=/var/run/icinga/status.dat - - - -# STATUS FILE UPDATE INTERVAL -# This option determines the frequency (in seconds) that -# Icinga will periodically dump program, host, and -# service status data. -# Increase the value, if you don't require it that often. - -#status_update_interval=30 -status_update_interval=10 - - - -# ICINGA USER -# This determines the effective user that Icinga should run as. -# You can either supply a username or a UID. - -icinga_user=icinga - - - -# ICINGA GROUP -# This determines the effective group that Icinga should run as. -# You can either supply a group name or a GID. - -icinga_group=icinga - - - -# EXTERNAL COMMAND OPTION -# This option allows you to specify whether or not Icinga should check -# for external commands (in the command file defined below). By default -# Icinga will *not* check for external commands, just to be on the -# cautious side. If you want to be able to use the CGI command interface -# you will have to enable this. -# Values: 0 = disable commands, 1 = enable commands - -check_external_commands=1 - - - -# EXTERNAL COMMAND CHECK INTERVAL -# This is the interval at which Icinga should check for external commands. -# This value works of the interval_length you specify later. If you leave -# that at its default value of 60 (seconds), a value of 1 here will cause -# Icinga to check for external commands every minute. If you specify a -# number followed by an "s" (i.e. 15s), this will be interpreted to mean -# actual seconds rather than a multiple of the interval_length variable. -# Note: In addition to reading the external command file at regularly -# scheduled intervals, Icinga will also check for external commands after -# event handlers are executed. -# NOTE: Setting this value to -1 causes Icinga to check the external -# command file as often as possible. - -#command_check_interval=15s -command_check_interval=-1 - - - -# EXTERNAL COMMAND FILE -# This is the file that Icinga checks for external command requests. -# It is also where the command CGI will write commands that are submitted -# by users, so it must be writeable by the user that the web server -# is running as (usually 'nobody'). Permissions should be set at the -# directory level instead of on the file, as the file is deleted every -# time its contents are processed. - -command_file=/var/rw/icinga.cmd - - - -# EXTERNAL COMMAND BUFFER SLOTS -# This settings is used to tweak the number of items or "slots" that -# the Icinga daemon should allocate to the buffer that holds incoming -# external commands before they are processed. As external commands -# are processed by the daemon, they are removed from the buffer. -# Increase the value, if you are using addons like check_mk supplying -# more external commands (passive check results) than usual. - -#external_command_buffer_slots=32768 -external_command_buffer_slots=4096 - - - -# LOCK FILE -# This is the lockfile that Icinga will use to store its PID number -# in when it is running in daemon mode. - -lock_file=/var/icinga.lock - - - -# TEMP FILE -# This is a temporary file that is used as scratch space when Icinga -# updates the status log, cleans the comment file, etc. This file -# is created, used, and deleted throughout the time that Icinga is -# running. - -temp_file=/var/icinga.tmp - - - -# TEMP PATH -# This is path where Icinga can create temp files for service and -# host check results, etc. - -temp_path=/tmp - - - -# EVENT BROKER OPTIONS -# Controls what (if any) data gets sent to the event broker. -# Values: 0 = Broker nothing -# -1 = Broker everything -# <other> = See documentation - -event_broker_options=-1 - - - -# EVENT BROKER MODULE(S) -# This directive is used to specify an event broker module that should -# by loaded by Icinga at startup. Use multiple directives if you want -# to load more than one module. Arguments that should be passed to -# the module at startup are seperated from the module path by a space. -# -#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -# WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING -#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -# -# Do NOT overwrite modules while they are being used by Icinga or Icinga -# will crash in a fiery display of SEGFAULT glory. This is a bug/limitation -# either in dlopen(), the kernel, and/or the filesystem. And maybe Icinga... -# -# The correct/safe way of updating a module is by using one of these methods: -# 1. Shutdown Icinga, replace the module file, restart Icinga -# 2. Delete the original module file, move the new module file into place, restart Icinga -# -# Example: -# -# broker_module=<modulepath> [moduleargs] - -#broker_module=/somewhere/module1.o -#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0 - -# Uncomment this to enable idomod.o -#broker_module=/usr/bin/idomod.o config_file=/etc/icinga/idomod.cfg - - - -# LOG ROTATION METHOD -# This is the log rotation method that Icinga should use to rotate -# the main log file. Values are as follows.. -# n = None - don't rotate the log -# h = Hourly rotation (top of the hour) -# d = Daily rotation (midnight every day) -# w = Weekly rotation (midnight on Saturday evening) -# m = Monthly rotation (midnight last day of month) - -log_rotation_method=d - - - -# LOG ARCHIVE PATH -# This is the directory where archived (rotated) log files should be -# placed (assuming you've chosen to do log rotation). - -log_archive_path=/var/archives - - - -# LOGGING OPTIONS FOR DAEMON -# If you want messages logged to the daemon log file (usually icinga.log). -# Default option is 1 (yes), the other valid option is 0 (no) - -use_daemon_log=1 - - - -# LOGGING OPTIONS FOR SYSLOG -# If you want messages logged to the syslog facility, as well as the -# Icinga log file set this option to 1. If not, set it to 0. - -use_syslog=1 - - - -# SYSLOG FACILITY -# If you enabled use_syslog you can set icinga to use a local facility -# instead of the default.To enable set this option to 1, if not, set it to 0. - -use_syslog_local_facility=0 - - - -# SYSLOG LOCAL FACILITY -# If you specified the use_syslog_local_facility you can chose which -# local facility to use. Valid values are from 0 to 7 - -syslog_local_facility=5 - - - -# NOTIFICATION LOGGING OPTION -# If you don't want notifications to be logged, set this value to 0. -# If notifications should be logged, set the value to 1. - -log_notifications=1 - - - -# SERVICE RETRY LOGGING OPTION -# If you don't want service check retries to be logged, set this value -# to 0. If retries should be logged, set the value to 1. - -log_service_retries=1 - - - -# HOST RETRY LOGGING OPTION -# If you don't want host check retries to be logged, set this value to -# 0. If retries should be logged, set the value to 1. - -log_host_retries=1 - - - -# EVENT HANDLER LOGGING OPTION -# If you don't want host and service event handlers to be logged, set -# this value to 0. If event handlers should be logged, set the value -# to 1. - -log_event_handlers=1 - - - -# INITIAL STATES LOGGING OPTION -# If you want Icinga to log all initial host and service states to -# the main log file (the first time the service or host is checked) -# you can enable this option by setting this value to 1. If you -# are not using an external application that does long term state -# statistics reporting, you do not need to enable this option. In -# this case, set the value to 0. - -log_initial_states=0 - - - -# CURRENT STATES LOGGING OPTION -# If you don't want Icinga to log all current host and service states -# after log has been rotated to the main log file, you can disable this -# option by setting this value to 0. Default value is 1. - -log_current_states=1 - - - -# EXTERNAL COMMANDS LOGGING OPTION -# If you don't want Icinga to log external commands, set this value -# to 0. If external commands should be logged, set this value to 1. -# Note: This option does not include logging of passive service -# checks - see the option below for controlling whether or not -# passive checks are logged. - -log_external_commands=1 - - - -# PASSIVE CHECKS LOGGING OPTION -# If you don't want Icinga to log passive host and service checks, set -# this value to 0. If passive checks should be logged, set -# this value to 1. - -log_passive_checks=1 - - - -# LOG EXTERNAL COMMAND USER - THIS WILL BE DEPRECATED!!! -# Future Icinga versions after 1.5 will ignore this config option, -# use the CGI logging feature instead (or any other logger/wrapper -# to the command pipe). -# -# This option allows you to enable the logging of the current user -# of external commands. -# The syntax will be CMD;username;cmdargs instead of CMD;cmdargs -# written to the logs, if the external application sends that -# correctly. -# Since this will break compatibility with existing log parsers, -# it is intentionally disabled by default. - -log_external_commands_user=0 - - - -# LONG PLUGIN OUTPUT LOGGING OPTION -# If you want Icinga to log the complete text of the plugin output -# to the log instead of only the first line then set this value to 1. -# Default value is 0. - -log_long_plugin_output=0 - - - -# GLOBAL HOST AND SERVICE EVENT HANDLERS -# These options allow you to specify a host and service event handler -# command that is to be run for every host or service state change. -# The global event handler is executed immediately prior to the event -# handler that you have optionally specified in each host or -# service definition. The command argument is the short name of a -# command definition that you define in your host configuration file. -# Read the HTML docs for more information. - -#global_host_event_handler=somecommand -#global_service_event_handler=somecommand - - - -# SERVICE INTER-CHECK DELAY METHOD -# This is the method that Icinga should use when initially -# "spreading out" service checks when it starts monitoring. The -# default is to use smart delay calculation, which will try to -# space all service checks out evenly to minimize CPU load. -# Using the dumb setting will cause all checks to be scheduled -# at the same time (with no delay between them)! This is not a -# good thing for production, but is useful when testing the -# parallelization functionality. -# n = None - don't use any delay between checks -# d = Use a "dumb" delay of 1 second between checks -# s = Use "smart" inter-check delay calculation -# x.xx = Use an inter-check delay of x.xx seconds - -service_inter_check_delay_method=s - - - -# MAXIMUM SERVICE CHECK SPREAD -# This variable determines the timeframe (in minutes) from the -# program start time that an initial check of all services should -# be completed. Default is 30 minutes. - -max_service_check_spread=30 - - - -# SERVICE CHECK INTERLEAVE FACTOR -# This variable determines how service checks are interleaved. -# Interleaving the service checks allows for a more even -# distribution of service checks and reduced load on remote -# hosts. Setting this value to 1 is equivalent to how versions -# of Icinga previous to 0.0.5 did service checks. Set this -# value to s (smart) for automatic calculation of the interleave -# factor unless you have a specific reason to change it. -# s = Use "smart" interleave factor calculation -# x = Use an interleave factor of x, where x is a -# number greater than or equal to 1. - -service_interleave_factor=s - - - -# HOST INTER-CHECK DELAY METHOD -# This is the method that Icinga should use when initially -# "spreading out" host checks when it starts monitoring. The -# default is to use smart delay calculation, which will try to -# space all host checks out evenly to minimize CPU load. -# Using the dumb setting will cause all checks to be scheduled -# at the same time (with no delay between them)! -# n = None - don't use any delay between checks -# d = Use a "dumb" delay of 1 second between checks -# s = Use "smart" inter-check delay calculation -# x.xx = Use an inter-check delay of x.xx seconds - -host_inter_check_delay_method=s - - - -# MAXIMUM HOST CHECK SPREAD -# This variable determines the timeframe (in minutes) from the -# program start time that an initial check of all hosts should -# be completed. Default is 30 minutes. - -max_host_check_spread=30 - - - -# MAXIMUM CONCURRENT SERVICE CHECKS -# This option allows you to specify the maximum number of -# service checks that can be run in parallel at any given time. -# Specifying a value of 1 for this variable essentially prevents -# any service checks from being parallelized. A value of 0 -# will not restrict the number of concurrent checks that are -# being executed. - -max_concurrent_checks=0 - - - -# HOST AND SERVICE CHECK REAPER FREQUENCY -# This is the frequency (in seconds!) that Icinga will process -# the results of host and service checks. -# Lower this value in larger environments to allow faster -# check result processing (requires more cpu power). - -#check_result_reaper_frequency=1 -check_result_reaper_frequency=10 - - - - -# MAX CHECK RESULT REAPER TIME -# This is the max amount of time (in seconds) that a single -# check result reaper event will be allowed to run before -# returning control back to Icinga so it can perform other -# duties. - -max_check_result_reaper_time=30 - - - - -# CHECK RESULT PATH -# This is directory where Icinga stores the results of host and -# service checks that have not yet been processed. -# -# Note: Make sure that only one instance of Icinga has access -# to this directory! - -check_result_path=/var/spool/checkresults - - - - -# MAX CHECK RESULT FILE AGE -# This option determines the maximum age (in seconds) which check -# result files are considered to be valid. Files older than this -# threshold will be mercilessly deleted without further processing. - -max_check_result_file_age=3600 - - - - -# CACHED HOST CHECK HORIZON -# This option determines the maximum amount of time (in seconds) -# that the state of a previous host check is considered current. -# Cached host states (from host checks that were performed more -# recently that the timeframe specified by this value) can immensely -# improve performance in regards to the host check logic. -# Too high of a value for this option may result in inaccurate host -# states being used by Icinga, while a lower value may result in a -# performance hit for host checks. Use a value of 0 to disable host -# check caching. - -cached_host_check_horizon=15 - - - -# CACHED SERVICE CHECK HORIZON -# This option determines the maximum amount of time (in seconds) -# that the state of a previous service check is considered current. -# Cached service states (from service checks that were performed more -# recently that the timeframe specified by this value) can immensely -# improve performance in regards to predictive dependency checks. -# Use a value of 0 to disable service check caching. - -cached_service_check_horizon=15 - - - -# ENABLE PREDICTIVE HOST DEPENDENCY CHECKS -# This option determines whether or not Icinga will attempt to execute -# checks of hosts when it predicts that future dependency logic test -# may be needed. These predictive checks can help ensure that your -# host dependency logic works well. -# Values: -# 0 = Disable predictive checks -# 1 = Enable predictive checks (default) - -enable_predictive_host_dependency_checks=1 - - - -# ENABLE PREDICTIVE SERVICE DEPENDENCY CHECKS -# This option determines whether or not Icinga will attempt to execute -# checks of service when it predicts that future dependency logic test -# may be needed. These predictive checks can help ensure that your -# service dependency logic works well. -# Values: -# 0 = Disable predictive checks -# 1 = Enable predictive checks (default) - -enable_predictive_service_dependency_checks=1 - - - -# SOFT STATE DEPENDENCIES -# This option determines whether or not Icinga will use soft state -# information when checking host and service dependencies. Normally -# Icinga will only use the latest hard host or service state when -# checking dependencies. If you want it to use the latest state (regardless -# of whether its a soft or hard state type), enable this option. -# Values: -# 0 = Don't use soft state dependencies (default) -# 1 = Use soft state dependencies - -soft_state_dependencies=0 - - - -# TIME CHANGE ADJUSTMENT THRESHOLDS -# These options determine when Icinga will react to detected changes -# in system time (either forward or backwards). - -#time_change_threshold=900 - - - -# AUTO-RESCHEDULING OPTION -# This option determines whether or not Icinga will attempt to -# automatically reschedule active host and service checks to -# "smooth" them out over time. This can help balance the load on -# the monitoring server. -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_reschedule_checks=0 - - - -# AUTO-RESCHEDULING INTERVAL -# This option determines how often (in seconds) Icinga will -# attempt to automatically reschedule checks. This option only -# has an effect if the auto_reschedule_checks option is enabled. -# Default is 30 seconds. -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_rescheduling_interval=30 - - - -# AUTO-RESCHEDULING WINDOW -# This option determines the "window" of time (in seconds) that -# Icinga will look at when automatically rescheduling checks. -# Only host and service checks that occur in the next X seconds -# (determined by this variable) will be rescheduled. This option -# only has an effect if the auto_reschedule_checks option is -# enabled. Default is 180 seconds (3 minutes). -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_rescheduling_window=180 - - - -# SLEEP TIME -# This is the number of seconds to sleep between checking for system -# events and service checks that need to be run. - -sleep_time=0.25 - - - -# TIMEOUT VALUES -# These options control how much time Icinga will allow various -# types of commands to execute before killing them off. Options -# are available for controlling maximum time allotted for -# service checks, host checks, event handlers, notifications, the -# ocsp command, and performance data commands. All values are in -# seconds. -# Increase the timeout values in case you are experiencing a lot -# of check timeouts. Addons like e.g. check_mk will perform -# one combined active servicecheck which could take longer than -# the default of 60sec. - -#service_check_timeout=120 -service_check_timeout=60 -host_check_timeout=30 -event_handler_timeout=30 -notification_timeout=30 -ocsp_timeout=5 -perfdata_timeout=5 - - - -# RETAIN STATE INFORMATION -# This setting determines whether or not Icinga will save state -# information for services and hosts before it shuts down. Upon -# startup Icinga will reload all saved service and host state -# information before starting to monitor. This is useful for -# maintaining long-term data on state statistics, etc, but will -# slow Icinga down a bit when it (re)starts. Since its only -# a one-time penalty, I think its well worth the additional -# startup delay. - -retain_state_information=1 - - - -# STATE RETENTION FILE -# This is the file that Icinga should use to store host and -# service state information before it shuts down. The state -# information in this file is also read immediately prior to -# starting to monitor the network when Icinga is restarted. -# This file is used only if the retain_state_information -# variable is set to 1. - -state_retention_file=/var/retention.dat - - - -# SYNC FILE -# This is an advanced facility to pass a subset of retention -# information into Icinga on a running system. This is similar -# to the state retention file with the following difference: -# -# - if the last_check value is less than the current last_check, -# then the state information is ignored (this must be specified -# immediately after the object identifiers) -# -# - downtimes and comments are not identified by an id number, but -# by other "similar characteristics". This is required to work in -# a distributed Nagios environment -# * downtimes: hostname, servicename (if appropriate), author, -# comment, start_time, end_time, fixed, duration -# * comments: hostname, servicename, author, comment -# -# If this variable is set, then on Icinga startup, the sync file -# will be read after the retention file has been processed. If the -# file is read successfully, it will be removed. -# If the file does not exist, no error will appear. -# There is also an API that will force a read of the sync file. - -#sync_retention_file=/var/sync.dat - - - -# RETENTION DATA UPDATE INTERVAL -# This setting determines how often (in minutes) that Icinga -# will automatically save retention data during normal operation. -# If you set this value to 0, Icinga will not save retention -# data at regular interval, but it will still save retention -# data before shutting down or restarting. If you have disabled -# state retention, this option has no effect. - -retention_update_interval=60 - - - -# USE RETAINED PROGRAM STATE -# This setting determines whether or not Icinga will set -# program status variables based on the values saved in the -# retention file. If you want to use retained program status -# information, set this value to 1. If not, set this value -# to 0. - -use_retained_program_state=1 - - -# DUMP RETAINED HOST SERVICE STATES TO NEB -# This setting determines wether or not Icinga will dump host -# and service states based on the values saved in the retention -# file to the neb modules. If you don't want that, use at your -# own risk and disable it - -dump_retained_host_service_states_to_neb=1 - - - -# USE RETAINED SCHEDULING INFO -# This setting determines whether or not Icinga will retain -# the scheduling info (next check time) for hosts and services -# based on the values saved in the retention file. If you -# If you want to use retained scheduling info, set this -# value to 1. If not, set this value to 0. - -use_retained_scheduling_info=1 - - - -# RETAINED ATTRIBUTE MASKS (ADVANCED FEATURE) -# The following variables are used to specify specific host and -# service attributes that should *not* be retained by Icinga during -# program restarts. -# -# The values of the masks are bitwise ANDs of values specified -# by the "MODATTR_" definitions found in include/common.h. -# For example, if you do not want the current enabled/disabled state -# of flap detection and event handlers for hosts to be retained, you -# would use a value of 24 for the host attribute mask... -# MODATTR_EVENT_HANDLER_ENABLED (8) + MODATTR_FLAP_DETECTION_ENABLED (16) = 24 - -# This mask determines what host attributes are not retained -retained_host_attribute_mask=0 - -# This mask determines what service attributes are not retained -retained_service_attribute_mask=0 - -# These two masks determine what process attributes are not retained. -# There are two masks, because some process attributes have host and service -# options. For example, you can disable active host checks, but leave active -# service checks enabled. -retained_process_host_attribute_mask=0 -retained_process_service_attribute_mask=0 - -# These two masks determine what contact attributes are not retained. -# There are two masks, because some contact attributes have host and -# service options. For example, you can disable host notifications for -# a contact, but leave service notifications enabled for them. -retained_contact_host_attribute_mask=0 -retained_contact_service_attribute_mask=0 - - - -# INTERVAL LENGTH -# This is the seconds per unit interval as used in the -# host/contact/service configuration files. Setting this to 60 means -# that each interval is one minute long (60 seconds). Other settings -# have not been tested much, so your mileage is likely to vary... - -interval_length=60 - - - -# AGGRESSIVE HOST CHECKING OPTION -# If you don't want to turn on aggressive host checking features, set -# this value to 0 (the default). Otherwise set this value to 1 to -# enable the aggressive check option. Read the docs for more info -# on what aggressive host check is or check out the source code in -# base/checks.c - -use_aggressive_host_checking=0 - - - -# SERVICE CHECK EXECUTION OPTION -# This determines whether or not Icinga will actively execute -# service checks when it initially starts. If this option is -# disabled, checks are not actively made, but Icinga can still -# receive and process passive check results that come in. Unless -# you're implementing redundant hosts or have a special need for -# disabling the execution of service checks, leave this enabled! -# Values: 1 = enable checks, 0 = disable checks - -execute_service_checks=1 - - - -# PASSIVE SERVICE CHECK ACCEPTANCE OPTION -# This determines whether or not Icinga will accept passive -# service checks results when it initially (re)starts. -# Values: 1 = accept passive checks, 0 = reject passive checks - -accept_passive_service_checks=1 - - - -# HOST CHECK EXECUTION OPTION -# This determines whether or not Icinga will actively execute -# host checks when it initially starts. If this option is -# disabled, checks are not actively made, but Icinga can still -# receive and process passive check results that come in. Unless -# you're implementing redundant hosts or have a special need for -# disabling the execution of host checks, leave this enabled! -# Values: 1 = enable checks, 0 = disable checks - -execute_host_checks=1 - - - -# PASSIVE HOST CHECK ACCEPTANCE OPTION -# This determines whether or not Icinga will accept passive -# host checks results when it initially (re)starts. -# Values: 1 = accept passive checks, 0 = reject passive checks - -accept_passive_host_checks=1 - - - -# NOTIFICATIONS OPTION -# This determines whether or not Icinga will sent out any host or -# service notifications when it is initially (re)started. -# Values: 1 = enable notifications, 0 = disable notifications - -enable_notifications=1 - - - -# EVENT HANDLER USE OPTION -# This determines whether or not Icinga will run any host or -# service event handlers when it is initially (re)started. Unless -# you're implementing redundant hosts, leave this option enabled. -# Values: 1 = enable event handlers, 0 = disable event handlers - -enable_event_handlers=1 - - - -# PROCESS PERFORMANCE DATA OPTION -# This determines whether or not Icinga will process performance -# data returned from service and host checks. If this option is -# enabled, host performance data will be processed using the -# host_perfdata_command (defined below) and service performance -# data will be processed using the service_perfdata_command (also -# defined below). Read the HTML docs for more information on -# performance data. -# Values: 1 = process performance data, 0 = do not process performance data - -process_performance_data=0 - - - -# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS -# These commands are run after every host and service check is -# performed. These commands are executed only if the -# process_performance_data option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on performance data. - -#host_perfdata_command=process-host-perfdata -#service_perfdata_command=process-service-perfdata - - - -# HOST AND SERVICE PERFORMANCE DATA FILES -# These files are used to store host and service performance data. -# Performance data is only written to these files if the -# process_performance_data option (above) is set to 1. - -#host_perfdata_file=/tmp/host-perfdata -#service_perfdata_file=/tmp/service-perfdata - - - -# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES -# These options determine what data is written (and how) to the -# performance data files. The templates may contain macros, special -# characters (\t for tab, \r for carriage return, \n for newline) -# and plain text. A newline is automatically added after each write -# to the performance data file. Some examples of what you can do are -# shown below. - -#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$ -#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$ - - - -# HOST AND SERVICE PERFORMANCE DATA FILE MODES -# This option determines whether or not the host and service -# performance data files are opened in write ("w") or append ("a") -# mode. If you want to use named pipes, you should use the special -# pipe ("p") mode which avoid blocking at startup, otherwise you will -# likely want the defult append ("a") mode. - -#host_perfdata_file_mode=a -#service_perfdata_file_mode=a - - - -# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL -# These options determine how often (in seconds) the host and service -# performance data files are processed using the commands defined -# below. A value of 0 indicates the files should not be periodically -# processed. - -#host_perfdata_file_processing_interval=0 -#service_perfdata_file_processing_interval=0 - - - -# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS -# These commands are used to periodically process the host and -# service performance data files. The interval at which the -# processing occurs is determined by the options above. - -#host_perfdata_file_processing_command=process-host-perfdata-file -#service_perfdata_file_processing_command=process-service-perfdata-file - - -# HOST AND SERVICE PERFORMANCE DATA PROCESS EMPTY RESULTS -# THese options determine wether the core will process empty perfdata -# results or not. This is needed for distributed monitoring, and intentionally -# turned on by default. -# If you don't require empty perfdata - saving some cpu cycles -# on unwanted macro calculation - you can turn that off. Be careful! -# Values: 1 = enable, 0 = disable - -#host_perfdata_process_empty_results=1 -#service_perfdata_process_empty_results=1 - - - -# ALLOW EMPTY HOSTGROUP ASSIGMENT FOR SERVICES -# This boolean option determines whether services assigned to empty -# host groups (host groups with no host members) will cause Icinga to -# exit with error on start up (or during a configuration check) or not. -# The default behavior if the option is not present in the main -# configuration file is for Icinga to exit with error if services are -# associated with host groups that have no hosts associated with them. - -#allow_empty_hostgroup_assignment=0 - - - -# OBSESS OVER SERVICE CHECKS OPTION -# This determines whether or not Icinga will obsess over service -# checks and run the ocsp_command defined below. Unless you're -# planning on implementing distributed monitoring, do not enable -# this option. Read the HTML docs for more information on -# implementing distributed monitoring. -# Values: 1 = obsess over services, 0 = do not obsess (default) - -obsess_over_services=0 - - - -# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND -# This is the command that is run for every service check that is -# processed by Icinga. This command is executed only if the -# obsess_over_services option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on implementing distributed monitoring. - -#ocsp_command=somecommand - - - -# OBSESS OVER HOST CHECKS OPTION -# This determines whether or not Icinga will obsess over host -# checks and run the ochp_command defined below. Unless you're -# planning on implementing distributed monitoring, do not enable -# this option. Read the HTML docs for more information on -# implementing distributed monitoring. -# Values: 1 = obsess over hosts, 0 = do not obsess (default) - -obsess_over_hosts=0 - - - -# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND -# This is the command that is run for every host check that is -# processed by Icinga. This command is executed only if the -# obsess_over_hosts option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on implementing distributed monitoring. - -#ochp_command=somecommand - - - -# TRANSLATE PASSIVE HOST CHECKS OPTION -# This determines whether or not Icinga will translate -# DOWN/UNREACHABLE passive host check results into their proper -# state for this instance of Icinga. This option is useful -# if you have distributed or failover monitoring setup. In -# these cases your other Icinga servers probably have a different -# "view" of the network, with regards to the parent/child relationship -# of hosts. If a distributed monitoring server thinks a host -# is DOWN, it may actually be UNREACHABLE from the point of -# this Icinga instance. Enabling this option will tell Icinga -# to translate any DOWN or UNREACHABLE host states it receives -# passively into the correct state from the view of this server. -# Values: 1 = perform translation, 0 = do not translate (default) - -translate_passive_host_checks=0 - - - -# PASSIVE HOST CHECKS ARE SOFT OPTION -# This determines whether or not Icinga will treat passive host -# checks as being HARD or SOFT. By default, a passive host check -# result will put a host into a HARD state type. This can be changed -# by enabling this option. -# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT - -passive_host_checks_are_soft=0 - - - -# ORPHANED HOST/SERVICE CHECK OPTIONS -# These options determine whether or not Icinga will periodically -# check for orphaned host service checks. Since service checks are -# not rescheduled until the results of their previous execution -# instance are processed, there exists a possibility that some -# checks may never get rescheduled. A similar situation exists for -# host checks, although the exact scheduling details differ a bit -# from service checks. Orphaned checks seem to be a rare -# problem and should not happen under normal circumstances. -# If you have problems with service checks never getting -# rescheduled, make sure you have orphaned service checks enabled. -# Values: 1 = enable checks, 0 = disable checks - -check_for_orphaned_services=1 -check_for_orphaned_hosts=1 - - - -# SERVICE CHECK TIMEOUT STATE -# This setting determines the state Icinga will report when a -# service check times out meaning it does not respond within -# service_check_timeout seconds. The default is set to Unknown -# and not Critical. -# Valid settings are: -# c - Critical -# u - Unknown (default) -# w - Warning -# o - OK - -service_check_timeout_state=u - - - -# SERVICE FRESHNESS CHECK OPTION -# This option determines whether or not Icinga will periodically -# check the "freshness" of service results. Enabling this option -# is useful for ensuring passive checks are received in a timely -# manner. -# Values: 1 = enabled freshness checking, 0 = disable freshness checking - -check_service_freshness=1 - - - -# SERVICE FRESHNESS CHECK INTERVAL -# This setting determines how often (in seconds) Icinga will -# check the "freshness" of service check results. If you have -# disabled service freshness checking, this option has no effect. - -service_freshness_check_interval=60 - - - -# HOST FRESHNESS CHECK OPTION -# This option determines whether or not Icinga will periodically -# check the "freshness" of host results. Enabling this option -# is useful for ensuring passive checks are received in a timely -# manner. -# Values: 1 = enabled freshness checking, 0 = disable freshness checking - -check_host_freshness=0 - - - -# HOST FRESHNESS CHECK INTERVAL -# This setting determines how often (in seconds) Icinga will -# check the "freshness" of host check results. If you have -# disabled host freshness checking, this option has no effect. - -host_freshness_check_interval=60 - - - - -# ADDITIONAL FRESHNESS THRESHOLD LATENCY -# This setting determines the number of seconds that Icinga -# will add to any host and service freshness thresholds that -# it calculates (those not explicitly specified by the user). - -additional_freshness_latency=15 - - - - -# FLAP DETECTION OPTION -# This option determines whether or not Icinga will try -# and detect hosts and services that are "flapping". -# Flapping occurs when a host or service changes between -# states too frequently. When Icinga detects that a -# host or service is flapping, it will temporarily suppress -# notifications for that host/service until it stops -# flapping. Flap detection is very experimental, so read -# the HTML documentation before enabling this feature! -# Values: 1 = enable flap detection -# 0 = disable flap detection (default) - -enable_flap_detection=1 - - - -# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES -# Read the HTML documentation on flap detection for -# an explanation of what this option does. This option -# has no effect if flap detection is disabled. - -low_service_flap_threshold=5.0 -high_service_flap_threshold=20.0 -low_host_flap_threshold=5.0 -high_host_flap_threshold=20.0 - - - -# DATE FORMAT OPTION -# This option determines how short dates are displayed. Valid options -# include: -# us (MM-DD-YYYY HH:MM:SS) -# euro (DD-MM-YYYY HH:MM:SS) -# iso8601 (YYYY-MM-DD HH:MM:SS) -# strict-iso8601 (YYYY-MM-DDTHH:MM:SS) -# - -date_format=us - - - - -# TIMEZONE OFFSET -# This option is used to override the default timezone that this -# instance of Icinga runs in. If not specified, Icinga will use -# the system configured timezone. -# -# NOTE: In order to display the correct timezone in the CGIs, you -# will also need to alter the Apache directives for the CGI path -# to include your timezone. Example: -# -# <Directory "/usr/local/icinga/sbin/"> -# SetEnv TZ "Australia/Brisbane" -# ... -# </Directory> - -#use_timezone=US/Mountain -#use_timezone=Australia/Brisbane - - - - -# P1.PL FILE LOCATION -# This value determines where the p1.pl perl script (used by the -# embedded Perl interpreter) is located. If you didn't compile -# Icinga with embedded Perl support, this option has no effect. - -p1_file=/usr/lib/p1.pl - - - -# EMBEDDED PERL INTERPRETER OPTION -# This option determines whether or not the embedded Perl interpreter -# will be enabled during runtime. This option has no effect if Icinga -# has not been compiled with support for embedded Perl. -# This option is intentionally disabled by default, because embedded -# perl can cause memory leaks and make Icinga unstable if not properly -# used. -# Only enable this setting when you really know what you are doing! -# Values: 0 = disable interpreter, 1 = enable interpreter - -enable_embedded_perl=0 - - - -# EMBEDDED PERL USAGE OPTION -# This option determines whether or not Icinga will process Perl plugins -# and scripts with the embedded Perl interpreter if the plugins/scripts -# do not explicitly indicate whether or not it is okay to do so. Read -# the HTML documentation on the embedded Perl interpreter for more -# information on how this option works. - -use_embedded_perl_implicitly=1 - - - -# EVENT HANDLERS FOR STALKED HOSTS/SERVICES -# Allow running event handlers for stalked hosts/services in order -# to forward to external systems. -# Values: 0 = disabled (default), 1 = enabled - -stalking_event_handlers_for_hosts=0 -stalking_event_handlers_for_services=0 - - - -# NOTIFICATIONS FOR STALKED HOSTS/SERVICES -# Allow notifications for stalked hosts/services globally -# for all contacts in order to notify about a stalking -# alert. -# Values: 0 = disabled (default), 1 = enabled - -stalking_notifications_for_hosts=0 -stalking_notifications_for_services=0 - - - -# ILLEGAL OBJECT NAME CHARACTERS -# This option allows you to specify illegal characters that cannot -# be used in host names, service descriptions, or names of other -# object types. - -illegal_object_name_chars=`~!$%^&*|'"<>?,()= - - - -# ILLEGAL MACRO OUTPUT CHARACTERS -# This option allows you to specify illegal characters that are -# stripped from macros before being used in notifications, event -# handlers, etc. This DOES NOT affect macros used in service or -# host check commands. -# The following macros are stripped of the characters you specify: -# $HOSTOUTPUT$ -# $HOSTPERFDATA$ -# $HOSTACKAUTHOR$ -# $HOSTACKCOMMENT$ -# $SERVICEOUTPUT$ -# $SERVICEPERFDATA$ -# $SERVICEACKAUTHOR$ -# $SERVICEACKCOMMENT$ - -illegal_macro_output_chars=`~$&|'"<> - - - -# REGULAR EXPRESSION MATCHING -# This option controls whether or not regular expression matching -# takes place in the object config files. Regular expression -# matching is used to match host, hostgroup, service, and service -# group names/descriptions in some fields of various object types. -# Values: 1 = enable regexp matching, 0 = disable regexp matching - -use_regexp_matching=0 - - - -# "TRUE" REGULAR EXPRESSION MATCHING -# This option controls whether or not "true" regular expression -# matching takes place in the object config files. This option -# only has an effect if regular expression matching is enabled -# (see above). If this option is DISABLED, regular expression -# matching only occurs if a string contains wildcard characters -# (* and ?). If the option is ENABLED, regexp matching occurs -# all the time (which can be annoying). -# Values: 1 = enable true matching, 0 = disable true matching - -use_true_regexp_matching=0 - - - -# ADMINISTRATOR EMAIL/PAGER ADDRESSES -# The email and pager address of a global administrator (likely you). -# Icinga never uses these values itself, but you can access them by -# using the $ADMINEMAIL$ and $ADMINPAGER$ macros in your notification -# commands. - -admin_email=icinga@localhost -admin_pager=pageicinga@localhost - - - -# DAEMON CORE DUMP OPTION -# This option determines whether or not Icinga is allowed to create -# a core dump when it runs as a daemon. Note that it is generally -# considered bad form to allow this, but it may be useful for -# debugging purposes. Enabling this option doesn't guarantee that -# a core file will be produced, but that's just life... -# Values: 1 - Allow core dumps -# 0 - Do not allow core dumps (default) - -daemon_dumps_core=0 - - - -# LARGE INSTALLATION TWEAKS OPTION -# This option determines whether or not Icinga will take some shortcuts -# which can save on memory and CPU usage in large Icinga installations. -# Read the documentation for more information on the benefits/tradeoffs -# of enabling this option. -# Values: 1 - Enabled tweaks -# 0 - Disable tweaks (default) - -use_large_installation_tweaks=0 - - - -# ENABLE ENVIRONMENT MACROS -# This option determines whether or not Icinga will make all standard -# macros available as environment variables when host/service checks -# and system commands (event handlers, notifications, etc.) are -# executed. Enabling this option can cause performance issues in -# large installations, as it will consume a bit more memory and (more -# importantly) consume more CPU. -# Keep in mind that various addons/plugins will require this setting -# to be enabled (e.g. check_oracle_health) for special usage. -# Values: 1 - Enable environment variable macros -# 0 - Disable environment variable macros (default) - -enable_environment_macros=0 - - - -# CHILD PROCESS MEMORY OPTION -# This option determines whether or not Icinga will free memory in -# child processes (processed used to execute system commands and host/ -# service checks). If you specify a value here, it will override -# program defaults. -# Value: 1 - Free memory in child processes -# 0 - Do not free memory in child processes - -#free_child_process_memory=1 - - - -# CHILD PROCESS FORKING BEHAVIOR -# This option determines how Icinga will fork child processes -# (used to execute system commands and host/service checks). Normally -# child processes are fork()ed twice, which provides a very high level -# of isolation from problems. Fork()ing once is probably enough and will -# save a great deal on CPU usage (in large installs), so you might -# want to consider using this. If you specify a value here, it will -# program defaults. -# Value: 1 - Child processes fork() twice -# 0 - Child processes fork() just once - -#child_processes_fork_twice=1 - - - -# DEBUG LEVEL -# This option determines how much (if any) debugging information will -# be written to the debug file. OR values together to log multiple -# types of information. -# Values: -# -1 = Everything -# 0 = Nothing -# 1 = Functions -# 2 = Configuration -# 4 = Process information -# 8 = Scheduled events -# 16 = Host/service checks -# 32 = Notifications -# 64 = Event broker -# 128 = External commands -# 256 = Commands -# 512 = Scheduled downtime -# 1024 = Comments -# 2048 = Macros - -debug_level=0 - - - -# DEBUG VERBOSITY -# This option determines how verbose the debug log out will be. -# Values: 0 = Brief output -# 1 = More detailed -# 2 = Very detailed - -debug_verbosity=1 - - - -# DEBUG FILE -# This option determines where Icinga should write debugging information. - -debug_file=/var/icinga.debug - - - -# MAX DEBUG FILE SIZE -# This option determines the maximum size (in bytes) of the debug file. If -# the file grows larger than this size, it will be renamed with a .old -# extension. If a file already exists with a .old extension it will -# automatically be deleted. This helps ensure your disk space usage doesn't -# get out of control when debugging Icinga. - -# 100M -max_debug_file_size=100000000 - - - -# EVENT PROFILING -# This option enables or disables event profiling for stats of event counts -# and time taken for events. Option can't be used on Solaris with gcc3. -# Values: 0 - disabled -# 1 - enabled - -event_profiling_enabled=0 |